| # Copyright (C) 2008, 2010, 2011 Google Inc. |
| # |
| # This file is free software; you can redistribute it and/or modify it |
| # under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, but |
| # WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| # General Public License for more details. |
| # |
| |
| AC_INIT(android-tools,2.0) |
| AC_PREREQ(2.59) |
| |
| AC_CONFIG_FILES([Makefile]) |
| |
| AC_CANONICAL_SYSTEM |
| |
| # Get 'install' or 'install-sh' and its variants. |
| AC_PROG_INSTALL |
| |
| # We only allow the following 3 targets: |
| # 1. arm-linux-androideabi (primary target) |
| # 2. arm-eabi (for Android kernel) |
| # 3. arm-newlib-eabi (for gcc testing) |
| # 4. i[3456]86-*-linux-gnu, x86-*-linux-gnu, i[3456]86-*-linux-android, x86-*-linux-android (for x86 targets) |
| # 5. mips*-*-linux* (for mips targets) |
| |
| GDB_TARGET=$target |
| case $target in |
| arm-unknown-linux-androideabi | arm-unknown-eabi) |
| BUILD_ANDROID_GCC=yes |
| GDB_TARGET=arm-elf-linux |
| ;; |
| arm-newlib-elf) |
| BUILD_ANDROID_GCC=no |
| ;; |
| i[[3456]]86-*-linux-gnu | x86_64-*-linux-gnu | i[[3456]]86-*-linux-android | x86_64-*-linux-android) |
| BUILD_ANDROID_GCC=yes |
| ;; |
| mips*-*-linux*) |
| BUILD_ANDROID_GCC=yes |
| ;; |
| *) |
| AC_MSG_ERROR(Unsupported target $target.); |
| esac |
| AC_SUBST(BUILD_ANDROID_GCC) |
| AC_SUBST(GDB_TARGET) |
| AC_ARG_PROGRAM |
| |
| # TOPLEVEL_CONFIGURE_ARGUMENTS lifted from top-level configure.ac in gcc. |
| |
| # Export original configure arguments for use by sub-configures. |
| # Quote arguments with shell meta charatcers. |
| TOPLEVEL_CONFIGURE_ARGUMENTS= |
| TOPLEVEL_NO_GOLD_CONFIGURE_ARGUMENTS= |
| |
| set -- "$progname" "$@" |
| for ac_arg |
| do |
| case "$ac_arg" in |
| *" "*|*" "*|*[[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\']]*) |
| ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` |
| # if the argument is of the form -foo=baz, quote the baz part only |
| ac_arg=`echo "'$ac_arg'" | sed "s/^'\([[-a-zA-Z0-9]]*=\)/\\1'/"` ;; |
| *) ;; |
| esac |
| # Add the quoted argument to the list. |
| TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS $ac_arg" |
| done |
| if test "$silent" = yes; then |
| TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS --silent" |
| fi |
| # Remove the initial space we just introduced and, as these will be |
| # expanded by make, quote '$'. |
| TOPLEVEL_CONFIGURE_ARGUMENTS=`echo "x$TOPLEVEL_CONFIGURE_ARGUMENTS" | sed -e 's/^x *//' -e 's,\\$,$$,g'` |
| AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS) |
| |
| # Base args. Strip norecursion, cache-file, srcdir, host, build, |
| # target, nonopt, and variable assignments. These are the ones we |
| # might not want to pass down to subconfigures. Also strip |
| # program-prefix, program-suffix, and program-transform-name, so that |
| # we can pass down a consistent program-transform-name. |
| baseargs= |
| keep_next=no |
| skip_next=no |
| enable_gold= |
| enable_ld_default= |
| eval "set -- $ac_configure_args" |
| for ac_arg |
| do |
| if test X"$skip_next" = X"yes"; then |
| skip_next=no |
| continue |
| fi |
| if test X"$keep_next" = X"yes"; then |
| case $ac_arg in |
| *\'*) |
| ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; |
| esac |
| baseargs="$baseargs '$ac_arg'" |
| keep_next=no |
| continue |
| fi |
| |
| # Handle separated arguments. Based on the logic generated by |
| # autoconf 2.59. |
| case $ac_arg in |
| *=* | --config-cache | -C | -disable-* | --disable-* \ |
| | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ |
| | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ |
| | -with-* | --with-* | -without-* | --without-* | --x) |
| separate_arg=no |
| ;; |
| -*) |
| separate_arg=yes |
| ;; |
| *) |
| separate_arg=no |
| ;; |
| esac |
| |
| case "$ac_arg" in |
| --no*) |
| continue |
| ;; |
| --c* | \ |
| --sr* | \ |
| --ho* | \ |
| --bu* | \ |
| --t* | \ |
| --program-* | \ |
| -cache_file* | \ |
| -srcdir* | \ |
| -host* | \ |
| -build* | \ |
| -target* | \ |
| -program-prefix* | \ |
| -program-suffix* | \ |
| -program-transform-name* ) |
| skip_next=$separate_arg |
| continue |
| ;; |
| -*) |
| # Strip argument from --enable-gold=*, since our binutils and |
| # gcc-4.6 take different arguments for dual linker support. We will |
| # pass --enable-gold=both/gold to binutils and --enable-gold=default |
| # gcc-4.6 if dual linker is needed. |
| case "$ac_arg" in |
| --enable-gold | --enable-gold=* ) |
| enable_gold="$ac_arg" |
| ac_arg="--enable-gold" |
| ;; |
| --disable-gold ) |
| enable_gold= |
| ;; |
| --enable-ld=default ) |
| enable_ld_default=yes |
| ;; |
| --disable-ld ) |
| enable_ld_default= |
| ;; |
| esac |
| |
| # An option. Add it. |
| case $ac_arg in |
| *\'*) |
| ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; |
| esac |
| baseargs="$baseargs '$ac_arg'" |
| keep_next=$separate_arg |
| ;; |
| *) |
| # Either a variable assignment, or a nonopt (triplet). Don't |
| # pass it down; let the Makefile handle this. |
| continue |
| ;; |
| esac |
| done |
| # Remove the initial space we just introduced and, as these will be |
| # expanded by make, quote '$'. |
| baseargs=`echo "x$baseargs" | sed -e 's/^x *//' -e 's,\\$,$$,g'` |
| |
| # Add in --program-transform-name, after --program-prefix and |
| # --program-suffix have been applied to it. Autoconf has already |
| # doubled dollar signs and backslashes in program_transform_name; we want |
| # the backslashes un-doubled, and then the entire thing wrapped in single |
| # quotes, because this will be expanded first by make and then by the shell. |
| # Also, because we want to override the logic in subdir configure scripts to |
| # choose program_transform_name, replace any s,x,x, with s,y,y,. |
| sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out |
| ${program_transform_name} |
| EOF_SED |
| gcc_transform_name=`cat conftestsed.out` |
| rm -f conftestsed.out |
| baseargs="$baseargs --program-transform-name='${gcc_transform_name}'" |
| if test "$silent" = yes; then |
| baseargs="$baseargs --silent" |
| fi |
| |
| AC_SUBST(baseargs) |
| AC_SUBST(enable_gold) |
| AC_SUBST(enable_ld_default) |
| |
| # Strip --with-sysroot, which is really "target" sysroot, from baseargs |
| # to form host_baseargs for building host libraries. Passing target |
| # --with-sysroot is detrimantal (*1). Invent a new option |
| # --with-host-sysroot if needed in the future. |
| # Note that baseargs are quoted. |
| # |
| # (*1) path dependency_libs= in .libs/libgmpxx.lai has '=' prefix! |
| # |
| host_baseargs= |
| for ac_arg in $baseargs |
| do |
| case $ac_arg in |
| \'--with-sysroot=*\' ) |
| ;; |
| *) |
| host_baseargs="$host_baseargs $ac_arg" |
| ;; |
| esac |
| done |
| |
| AC_SUBST(host_baseargs) |
| |
| ENABLE_GRAPHITE=no |
| AC_ARG_ENABLE([graphite], |
| AC_HELP_STRING([--enable-graphite], |
| [Enable Graphite optimization @<:@default=no@:>@])) |
| graphite=yes |
| if test x${enableval} != xyes; then |
| graphite=no |
| fi |
| if test "$GCC_MIN_VERSION_4_5_0" == "no"; then |
| graphite=no |
| fi |
| ENABLE_GRAPHITE=$graphite |
| AC_SUBST(ENABLE_GRAPHITE) |
| |
| # package to source path |
| case $srcdir in |
| /* | [A-Za-z]:*) package_to_srcdir=$srcdir ;; |
| *) package_to_srcdir=../$srcdir ;; |
| esac |
| AC_SUBST(package_to_srcdir) |
| # |
| # Specify tool component versions |
| # |
| |
| # macro to check that we have a package. A package x exists if any one |
| # of the following exists (x is in the format of "tool-version"): |
| # 1. tool/x |
| # 2. tool/x.tar.gz |
| # 3. tool/x.tgz |
| # 4. tool/x.tar.bz2 |
| m4_pattern_allow([^AC_MSG_ERROR$]) |
| AC_DEFUN([ANDROID_CHECK_PACKAGE], |
| [x=$1; tool=$(echo "$x" | sed -e 's/-.*//'); version=$(echo "$x" | sed -e 's/[[^-]]*-//'); \ |
| if test \( ! -d $srcdir/../$tool/$1 \) -a \( x"$version" != x"none" \) ; then |
| if test -f $srcdir/../$tool/$1.tar ; then |
| mkdir -p temp-src && tar -C temp-src -xf $srcdir/../$tool/$1.tar |
| elif test -f $srcdir/../$tool/$1.tar.gz ; then |
| mkdir -p temp-src && tar -C temp-src -xzf $srcdir/../$tool/$1.tar.gz |
| elif test -f $srcdir/../$tool/$1.tgz ; then |
| mkdir -p temp-src && tar -C temp-src -xzf $srcdir/../$tool/$1.tgz |
| elif test -f $srcdir/../$tool/$1.tar.bz2 ; then |
| mkdir -p temp-src && tar -C temp-src -xjf $srcdir/../$tool/$1.tar.bz2 |
| elif test -f $srcdir/../tarballs/$1.tar ; then |
| mkdir -p temp-src && tar -C temp-src -xf $srcdir/../tarballs/$1.tar |
| elif test -f $srcdir/../tarballs/$1.tar.gz ; then |
| mkdir -p temp-src && tar -C temp-src -xzf $srcdir/../tarballs/$1.tar.gz |
| elif test -f $srcdir/../tarballs/$1.tgz ; then |
| mkdir -p temp-src && tar -C temp-src -xzf $srcdir/../tarballs/$1.tgz |
| elif test -f $srcdir/../tarballs/$1.tar.bz2 ; then |
| mkdir -p temp-src && tar -C temp-src -xjf $srcdir/../tarballs/$1.tar.bz2 |
| else |
| AC_MSG_ERROR('package $1 does not exist.') |
| fi |
| fi ]) |
| |
| # binutils version (default is 2.17) |
| AC_MSG_CHECKING([target binutils version to build]) |
| AC_ARG_WITH([binutils-version], |
| [ --with-binutils-version=VERSION |
| use binutils-VERSION (default is 2.17)], |
| [if test x"$withval" != x ; then |
| BINUTILS_VERSION="$withval" |
| fi], |
| [BINUTILS_VERSION="2.17"]) |
| AC_MSG_RESULT($BINUTILS_VERSION) |
| AC_SUBST(BINUTILS_VERSION) |
| ANDROID_CHECK_PACKAGE(binutils-${BINUTILS_VERSION}) |
| |
| m4_pattern_allow(AM_INIT_AUTOMAKE) |
| # macro to find binutils version for dual linker support. |
| # For binutils-2.21 and up, add --enable-gold=default, |
| # else add --enable-gold=both/gold. |
| AC_DEFUN([FIND_BINUTILS_VERSION], |
| [binutils_version_file="${srcdir}/../binutils/$1/bfd/configure.in" |
| if test -f "${binutils_version_file}"; then |
| binutils_version_num=`grep AM_INIT_AUTOMAKE ${binutils_version_file} | \ |
| sed -n "s/[AM_INIT_AUTOMAKE][[^,]]*,*\([[^)]]*\))/\1/p"` |
| BINUTILS_MAJOR=`echo $binutils_version_num | sed -e "s/[[^0-9]].*//"` |
| BINUTILS_MINOR=`echo $binutils_version_num | \ |
| sed -e "s/^[[0-9]]*\.//" -e "s/[[^0-9]].*//"` |
| if test "$BINUTILS_MAJOR" -gt 2 -o \ |
| \( "$BINUTILS_MAJOR" -eq 2 -a "$BINUTILS_MINOR" -ge 21 \); then |
| $2_MIN_VERSION_2_21="yes" |
| else |
| $2_MIN_VERSION_2_21="no" |
| fi |
| else |
| # No configure file found. assume yes. |
| $2_MIN_VERSION_2_21="yes" |
| fi ]) |
| |
| FIND_BINUTILS_VERSION(binutils-${BINUTILS_VERSION},[BINUTILS]) |
| AC_SUBST(BINUTILS_MIN_VERSION_2_21) |
| |
| # gold binutils version (default is the same version as the main |
| # binutils package). |
| GOLD_VERSION="$BINUTILS_VERSION" |
| AC_MSG_CHECKING([target gold binutils version to build]) |
| AC_ARG_WITH([gold-version], |
| [ --with-gold-version=VERSION |
| use binutils-VERSION for gold (default is the main binutils version)], |
| [if test x"$withval" != x ; then |
| GOLD_VERSION="$withval" |
| fi]) |
| AC_MSG_RESULT($GOLD_VERSION) |
| AC_SUBST(GOLD_VERSION) |
| |
| # Skip check if we are using the main binutils for gold. |
| GOLD_MIN_VERSION_2_21="$BINUTILS_MIN_VERSION_2_21" |
| if test x"$GOLD_VERSION" != x"$BINUTILS_VERSION" ; then |
| ANDROID_CHECK_PACKAGE(binutils-${GOLD_VERSION}) |
| FIND_BINUTILS_VERSION(binutils-${GOLD_VERSION},[GOLD]) |
| fi |
| AC_SUBST(GOLD_MIN_VERSION_2_21) |
| |
| # gcc version (default is 4.2.1) |
| AC_MSG_CHECKING([target gcc version to build]) |
| AC_ARG_WITH([gcc-version], |
| [ --with-gcc-version=VERSION |
| use gcc-VERSION (default is 4.2.1)], |
| [if test x"$withval" != x ; then |
| GCC_VERSION="$withval" |
| fi], |
| [GCC_VERSION="4.2.1"]) |
| AC_MSG_RESULT($GCC_VERSION) |
| AC_SUBST(GCC_VERSION) |
| ANDROID_CHECK_PACKAGE(gcc-${GCC_VERSION}) |
| |
| # figure out if we need to build gmp and mpfr for gcc 4.3.0+ |
| gcc_version_file="${srcdir}/../gcc/gcc-${GCC_VERSION}/gcc/BASE-VER" |
| if test -f "${gcc_version_file}"; then |
| GCC_MAJOR=`head -n 1 $gcc_version_file | sed -e "s/[[^0-9]].*//"` |
| GCC_MINOR=`head -n 1 $gcc_version_file | \ |
| sed -e "s/^[[0-9]]*\.//" -e "s/[[^0-9]].*//"` |
| if test "$GCC_MAJOR" -gt 4 -o \ |
| \( "$GCC_MAJOR" -eq 4 -a "$GCC_MINOR" -ge 3 \) ; then |
| GCC_MIN_VERSION_4_3_0="yes" |
| else |
| GCC_MIN_VERSION_4_3_0="no" |
| fi |
| if test "$GCC_MAJOR" -gt 4 -o \ |
| \( "$GCC_MAJOR" -eq 4 -a "$GCC_MINOR" -ge 5 \) ; then |
| GCC_MIN_VERSION_4_5_0="yes" |
| else |
| GCC_MIN_VERSION_4_5_0="no" |
| fi |
| if test "$GCC_MAJOR" -gt 4 -o \ |
| \( "$GCC_MAJOR" -eq 4 -a "$GCC_MINOR" -ge 8 \) ; then |
| GCC_MIN_VERSION_4_8_0="yes" |
| else |
| GCC_MIN_VERSION_4_8_0="no" |
| fi |
| else |
| # No version file, assume it is trunk |
| GCC_MIN_VERSION_4_3_0="yes" |
| GCC_MIN_VERSION_4_5_0="yes" |
| GCC_MIN_VERSION_4_8_0="yes" |
| fi |
| AC_SUBST(GCC_MIN_VERSION_4_3_0) |
| AC_SUBST(GCC_MIN_VERSION_4_5_0) |
| AC_SUBST(GCC_MIN_VERSION_4_8_0) |
| |
| # newlib version (default is 1.16.0) |
| # newlib is only used for arm-newlib-eabi for testing |
| if test x$target == xarm-newlib-elf ; then |
| AC_MSG_CHECKING([target newlib version to build]) |
| AC_ARG_WITH([newlib-version], |
| [ --with-newlib-version=VERSION |
| use newlib-VERSION (default is 1.16.0)], |
| [if test x"$withval" != x ; then |
| NEWLIB_VERSION="$withval" |
| fi], |
| [NEWLIB_VERSION="1.16.0"]) |
| AC_MSG_RESULT($NEWLIB_VERSION) |
| AC_SUBST(NEWLIB_VERSION) |
| ANDROID_CHECK_PACKAGE(newlib-${NEWLIB_VERSION}) |
| fi |
| |
| if test "$GCC_MIN_VERSION_4_3_0" == "yes"; then |
| # gmp version (default is 4.2.2) |
| # gmp is only used for gcc version higher than 4.3.0 |
| AC_MSG_CHECKING([gmp version]) |
| AC_ARG_WITH([gmp-version], |
| [ --with-gmp-version=VERSION |
| use gmp-VERSION (default is 4.2.2)], |
| [if test x"$withval" != x ; then |
| GMP_VERSION="$withval" |
| fi], |
| [GMP_VERSION="4.2.2"]) |
| AC_MSG_RESULT($GMP_VERSION) |
| ANDROID_CHECK_PACKAGE(gmp-${GMP_VERSION}) |
| |
| # mpfr version (default is 2.3.0) |
| # mpfr is only used for gcc version higher than 4.3.0 |
| AC_MSG_CHECKING([mpfr version]) |
| AC_ARG_WITH([mpfr-version], |
| [ --with-mpfr-version=VERSION |
| use mpfr-VERSION (default is 2.3.0)], |
| [if test x"$withval" != x ; then |
| MPFR_VERSION="$withval" |
| fi], |
| [MPFR_VERSION="2.3.0"]) |
| AC_MSG_RESULT($MPFR_VERSION) |
| ANDROID_CHECK_PACKAGE(mpfr-${MPFR_VERSION}) |
| |
| fi |
| AC_SUBST(GMP_VERSION) |
| AC_SUBST(MPFR_VERSION) |
| |
| if test "$GCC_MIN_VERSION_4_5_0" == "yes"; then |
| # mpc version (default is 0.8.1) |
| # mpc is only used for gcc version higher than 4.5.0 |
| AC_MSG_CHECKING([mpc version]) |
| AC_ARG_WITH([mpc-version], |
| [ --with-mpc-version=VERSION |
| use mpc-VERSION (default is 0.8.1)], |
| [if test x"$withval" != x; then |
| MPC_VERSION="$withval" |
| fi], |
| [MPC_VERSION="0.8.1"]) |
| AC_MSG_RESULT($MPC_VERSION) |
| ANDROID_CHECK_PACKAGE(mpc-${MPC_VERSION}) |
| fi |
| AC_SUBST(MPC_VERSION) |
| |
| if test "$ENABLE_GRAPHITE" == "yes"; then |
| # ppl version (default is 0.11.2) |
| # ppl is only used for gcc 4.5 and 4.6 with graphite optimization. |
| AC_MSG_CHECKING([ppl version]) |
| AC_ARG_WITH([ppl-version], |
| [ --with-ppl-version=VERSION |
| use ppl-VERSION (default is 0.11.2)], |
| [if test x"$withval" != x ; then |
| PPL_VERSION="$withval" |
| fi], |
| [PPL_VERSION="0.11.2"]) |
| AC_MSG_RESULT($PPL_VERSION) |
| ANDROID_CHECK_PACKAGE(ppl-${PPL_VERSION}) |
| fi |
| AC_SUBST(PPL_VERSION) |
| |
| if test "$ENABLE_GRAPHITE" == "yes"; then |
| # cloog-ppl or cloog version (default is 0.15.9) |
| # cloog is only used for gcc 4.5+ with graphite optimization. |
| AC_MSG_CHECKING([cloog version]) |
| AC_ARG_WITH([cloog-version], |
| [ --with-cloog-version=VERSION |
| use cloog-VERSION (default is 0.15.9)], |
| [if test x"$withval" != x ; then |
| CLOOG_VERSION="$withval" |
| fi], |
| [CLOOG_VERSION="0.15.9"]) |
| AC_MSG_RESULT($CLOOG_VERSION) |
| case $CLOOG_VERSION in |
| 0.15*) |
| # CLooG/PPL relies on the PPL for version 0.15.x |
| CLOOG_VERSION="ppl-$CLOOG_VERSION" |
| ;; |
| 0.16*|0.17*|0.18*) |
| # CLooG 0.16+ has its own embedded polyhedral library |
| CLOOG_BACKEND="--enable-cloog-backend=isl" |
| ;; |
| *) |
| AC_MSG_ERROR(Unsupported cloog version); |
| esac |
| AC_SUBST(CLOOG_BACKEND) |
| ANDROID_CHECK_PACKAGE(cloog-${CLOOG_VERSION}) |
| fi |
| AC_SUBST(CLOOG_VERSION) |
| |
| if test "$ENABLE_GRAPHITE" == "yes"; then |
| # isl version (default is 0.11.1) |
| # isl is only used for gcc 4.8+ with graphite optimization. |
| AC_MSG_CHECKING([isl version]) |
| AC_ARG_WITH([isl-version], |
| [ --with-isl-version=VERSION |
| use isl-VERSION (default is 0.11.1)], |
| [if test x"$withval" != x ; then |
| ISL_VERSION="$withval" |
| fi], |
| [ISL_VERSION="0.11.1"]) |
| AC_MSG_RESULT($ISL_VERSION) |
| ANDROID_CHECK_PACKAGE(isl-${ISL_VERSION}) |
| fi |
| AC_SUBST(ISL_VERSION) |
| |
| # gdb version (default is 6.6) |
| AC_MSG_CHECKING([target gdb version to build]) |
| AC_ARG_WITH([gdb-version], |
| [ --with-gdb-version=VERSION |
| use gdb-VERSION (default is 6.6)], |
| [if test x"$withval" != x ; then |
| GDB_VERSION="$withval" |
| fi], |
| [GDB_VERSION="6.6"]) |
| AC_MSG_RESULT($GDB_VERSION) |
| AC_SUBST(GDB_VERSION) |
| ANDROID_CHECK_PACKAGE(gdb-${GDB_VERSION}) |
| |
| # figure out if we need to build expat for gdb 7.2+ |
| gdb_version_file="${srcdir}/../gdb/gdb-${GDB_VERSION}/gdb/version.in" |
| if test -f "${gdb_version_file}"; then |
| GDB_MAJOR=`head -n 1 $gdb_version_file | sed -e "s/[[^0-9]].*//"` |
| GDB_MINOR=`head -n 1 $gdb_version_file | \ |
| sed -e "s/^[[0-9]]*\.//" -e "s/[[^0-9]].*//"` |
| if test "$GDB_MAJOR" -gt 7 -o \ |
| \( "$GDB_MAJOR" -eq 7 -a "$GDB_MINOR" -ge 2 \) ; then |
| GDB_MIN_VERSION_7_2="yes" |
| else |
| GDB_MIN_VERSION_7_2="no" |
| fi |
| else |
| # No version file, assume it is trunk |
| GDB_MIN_VERSION_7_2="yes" |
| fi |
| AC_SUBST(GDB_MIN_VERSION_7_2) |
| |
| if test "$GDB_MIN_VERSION_7_2" == "yes"; then |
| # expat version (default is 2.0.1) |
| # expat is only used for gdb version higher than 7.2 |
| AC_MSG_CHECKING([expat version]) |
| AC_ARG_WITH([expat-version], |
| [ --with-expat-version=VERSION |
| use expat-VERSION (default is 2.0.1)], |
| [if test x"$withval" != x ; then |
| EXPAT_VERSION="$withval" |
| fi], |
| [EXPAT_VERSION="2.0.1"]) |
| AC_MSG_RESULT($EXPAT_VERSION) |
| ANDROID_CHECK_PACKAGE(expat-${EXPAT_VERSION}) |
| fi |
| AC_SUBST(EXPAT_VERSION) |
| |
| if test "$GDB_MIN_VERSION_7_2" == "yes"; then |
| AC_MSG_CHECKING([with python]) |
| AC_ARG_WITH([python], |
| [ --with-python=WITH_PYTHON |
| use python WITH_PYTHON)], |
| [if test x"$withval" != x ; then |
| WITH_PYTHON="$withval" |
| fi], |
| [WITH_PYTHON=""]) |
| AC_MSG_RESULT($WITH_PYTHON) |
| fi |
| AC_SUBST(WITH_PYTHON) |
| |
| # For certain targets, with gdb 7.2+, the proper gdb target is |
| # arm-linux-android. |
| if test "$GDB_MIN_VERSION_7_2" == "yes"; then |
| case $target in |
| arm-unknown-linux-androideabi | arm-unknown-eabi) |
| GDB_TARGET=arm-linux-android |
| ;; |
| *) |
| ;; |
| esac |
| fi |
| |
| # Sysroot location |
| AC_ARG_WITH([sysroot], |
| [ --with-sysroot=DIR |
| use target sysroot in DIR], |
| [if test x"$withval" != x ; then |
| if test $build != $host ; then |
| case "$withval" in |
| "$prefix"|"${prefix%/}/"*) |
| ;; |
| *) |
| AC_MSG_ERROR('Target sysroot must be a subdirectory of <prefix> for canadian cross build $prefix ; $withval') |
| ;; |
| esac |
| fi |
| |
| sysroot="$withval" |
| fi], |
| [if test $build != $host ; then |
| AC_MSG_ERROR('Target sysroot is not set for canadian cross build') |
| fi]) |
| AC_SUBST(sysroot) |
| |
| # Specify a location for mpc |
| AC_ARG_WITH(mpc, [ --with-mpc=PATH |
| specify prefix directory for installed MPC package.], |
| [if test -d "$withval" ; then |
| have_mpc="$withval" |
| have_mpfr="$withval" |
| have_gmp="$withval" |
| elif test x"$withval" != x"no"; then |
| AC_MSG_ERROR(invalid value for --with-mpc) |
| else |
| have_mpc=no |
| fi], |
| [have_mpc=no]) |
| AC_SUBST(have_mpc) |
| |
| # Specify a location for mpfr |
| AC_ARG_WITH(mpfr, [ --with-mpfr=PATH |
| specify prefix directory for installed MPFR package.], |
| [if test -d "$withval" ; then |
| have_mpfr="$withval" |
| have_gmp="$withval" |
| elif test x"$withval" != x"no"; then |
| AC_MSG_ERROR(invalid value for --with-mpfr) |
| else |
| have_mpfr=no |
| fi], |
| [have_mpfr=no]) |
| AC_SUBST(have_mpfr) |
| |
| # Specify a location for gmp |
| AC_ARG_WITH(gmp, [ --with-gmp=PATH |
| specify prefix directory for the installed GMP package.], |
| [if test -d "$withval" ; then |
| have_gmp="$withval" |
| elif test x"$withval" != x"no"; then |
| AC_MSG_ERROR(invalid value for --with-gmp) |
| else |
| have_gmp=no |
| fi], |
| [have_gmp=no]) |
| AC_SUBST(have_gmp) |
| |
| # Specify a location for ppl |
| AC_ARG_WITH(ppl, [ --with-ppl=PATH |
| specify prefix directory for the installed PPL package.], |
| [if test -d "$withval" ; then |
| have_ppl="$withval" |
| elif test x"$withval" != x"no"; then |
| AC_MSG_ERROR(invalid value for --with-ppl) |
| else |
| have_ppl=no |
| fi], |
| [have_ppl=no]) |
| AC_SUBST(have_ppl) |
| |
| # Specify a location for cloog |
| AC_ARG_WITH(cloog, [ --with-cloog=PATH |
| specify prefix directory for the installed CLooG package.], |
| [if test -d "$withval" ; then |
| have_cloog="$withval" |
| elif test x"$withval" != x"no"; then |
| AC_MSG_ERROR(invalid value for --with-cloog) |
| else |
| have_cloog=no |
| fi], |
| [have_cloog=no]) |
| AC_SUBST(have_cloog) |
| |
| # Specify a location for isl |
| AC_ARG_WITH(isl, [ --with-isl=PATH |
| specify prefix directory for the installed ISL package.], |
| [if test -d "$withval" ; then |
| have_isl="$withval" |
| elif test x"$withval" != x"no"; then |
| AC_MSG_ERROR(invalid value for --with-isl) |
| else |
| have_isl=no |
| fi], |
| [have_isl=no]) |
| AC_SUBST(have_isl) |
| |
| # Specify a location for expat |
| AC_ARG_WITH(expat, [ --with-expat=PATH |
| specify prefix directory for the installed EXPAT package.], |
| [if test -d "$withval" ; then |
| have_expat="$withval" |
| elif test x"$withval" != x"no"; then |
| AC_MSG_ERROR(invalid value for --with-expat) |
| else |
| have_expat=no |
| fi], |
| [have_expat=no]) |
| AC_SUBST(have_expat) |
| |
| AC_OUTPUT |