| #!/usr/bin/env python3 |
| # |
| # Copyright 2016 - The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| """ |
| Sanity tests for voice tests in telephony |
| """ |
| import time |
| |
| from acts.test_decorators import test_tracker_info |
| from acts.controllers.anritsu_lib._anritsu_utils import AnritsuError |
| from acts.controllers.anritsu_lib.md8475a import CsfbType |
| from acts.controllers.anritsu_lib.md8475a import MD8475A |
| from acts.controllers.anritsu_lib.md8475a import VirtualPhoneAutoAnswer |
| from acts_contrib.test_utils.tel.anritsu_utils import WAIT_TIME_ANRITSU_REG_AND_CALL |
| from acts_contrib.test_utils.tel.anritsu_utils import call_mo_setup_teardown |
| from acts_contrib.test_utils.tel.anritsu_utils import ims_call_cs_teardown |
| from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_1x |
| from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_1x_evdo |
| from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_gsm |
| from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_lte |
| from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_lte_1x |
| from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_lte_wcdma |
| from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_lte_gsm |
| from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_wcdma |
| from acts_contrib.test_utils.tel.anritsu_utils import set_usim_parameters |
| from acts_contrib.test_utils.tel.anritsu_utils import set_post_sim_params |
| from acts_contrib.test_utils.tel.tel_defines import CALL_TEARDOWN_PHONE |
| from acts_contrib.test_utils.tel.tel_defines import RAT_FAMILY_CDMA2000 |
| from acts_contrib.test_utils.tel.tel_defines import RAT_FAMILY_GSM |
| from acts_contrib.test_utils.tel.tel_defines import RAT_FAMILY_LTE |
| from acts_contrib.test_utils.tel.tel_defines import RAT_FAMILY_UMTS |
| from acts_contrib.test_utils.tel.tel_defines import NETWORK_MODE_CDMA |
| from acts_contrib.test_utils.tel.tel_defines import NETWORK_MODE_GSM_ONLY |
| from acts_contrib.test_utils.tel.tel_defines import NETWORK_MODE_GSM_UMTS |
| from acts_contrib.test_utils.tel.tel_defines import NETWORK_MODE_LTE_CDMA_EVDO |
| from acts_contrib.test_utils.tel.tel_defines import NETWORK_MODE_LTE_CDMA_EVDO_GSM_WCDMA |
| from acts_contrib.test_utils.tel.tel_defines import NETWORK_MODE_LTE_GSM_WCDMA |
| from acts_contrib.test_utils.tel.tel_defines import WAIT_TIME_IN_CALL |
| from acts_contrib.test_utils.tel.tel_defines import WAIT_TIME_IN_CALL_FOR_IMS |
| from acts_contrib.test_utils.tel.tel_ims_utils import toggle_volte |
| from acts_contrib.test_utils.tel.tel_logging_utils import start_qxdm_loggers |
| from acts_contrib.test_utils.tel.tel_phone_setup_utils import ensure_network_rat |
| from acts_contrib.test_utils.tel.tel_test_utils import toggle_airplane_mode_by_adb |
| from acts_contrib.test_utils.tel.tel_test_utils import set_preferred_apn_by_adb |
| from acts_contrib.test_utils.tel.tel_phone_setup_utils import phone_idle_volte |
| from acts_contrib.test_utils.tel.TelephonyBaseTest import TelephonyBaseTest |
| |
| DEFAULT_CALL_NUMBER = "0123456789" |
| |
| |
| class TelLabVoiceTest(TelephonyBaseTest): |
| def setup_class(self): |
| super().setup_class() |
| try: |
| self.stress_test_number = int( |
| self.user_params["stress_test_number"]) |
| self.log.info("Executing {} calls per test in stress test mode". |
| format(self.stress_test_number)) |
| except KeyError: |
| self.stress_test_number = 0 |
| self.log.info( |
| "No 'stress_test_number' defined: running single iteration tests" |
| ) |
| |
| self.ad = self.android_devices[0] |
| self.ad.sim_card = getattr(self.ad, "sim_card", None) |
| self.md8475a_ip_address = self.user_params[ |
| "anritsu_md8475a_ip_address"] |
| self.wlan_option = self.user_params.get("anritsu_wlan_option", False) |
| self.md8475_version = self.user_params.get("md8475", "A") |
| |
| setattr(self, 'voice_call_number', DEFAULT_CALL_NUMBER) |
| if 'voice_call_number' in self.user_params: |
| self.voice_call_number = self.user_params['voice_call_number'] |
| self.log.info("Using provided voice call number: {}".format( |
| self.voice_call_number)) |
| |
| if self.ad.sim_card == "VzW12349": |
| set_preferred_apn_by_adb(self.ad, "VZWINTERNET") |
| |
| try: |
| self.anritsu = MD8475A(self.md8475a_ip_address, self.wlan_option, |
| self.md8475_version) |
| except AnritsuError: |
| self.log.error("Error in connecting to Anritsu Simulator") |
| return False |
| return True |
| |
| def setup_test(self): |
| try: |
| if getattr(self, "qxdm_log", True): |
| start_qxdm_loggers(self.log, self.android_devices) |
| self.ad.droid.telephonyFactoryReset() |
| if self.ad.sim_card == "VzW12349": |
| self.ad.droid.imsSetVolteProvisioning(True) |
| except Exception as e: |
| self.ad.log.error(e) |
| toggle_airplane_mode_by_adb(self.log, self.ad, True) |
| # get a handle to virtual phone |
| self.virtualPhoneHandle = self.anritsu.get_VirtualPhone() |
| return True |
| |
| def teardown_test(self): |
| self.log.info("Stopping Simulation") |
| self.anritsu.stop_simulation() |
| toggle_airplane_mode_by_adb(self.log, self.ad, True) |
| return True |
| |
| def teardown_class(self): |
| self.anritsu.disconnect() |
| return True |
| |
| def _setup_voice_call(self, |
| set_simulation_func, |
| phone_setup_func, |
| phone_idle_func_after_registration=None, |
| is_ims_call=False, |
| is_wait_for_registration=True, |
| csfb_type=None, |
| srvcc=None, |
| mo=True, |
| voice_number=DEFAULT_CALL_NUMBER, |
| teardown_side=CALL_TEARDOWN_PHONE, |
| wait_time_in_call=WAIT_TIME_IN_CALL): |
| try: |
| set_simulation_func(self.anritsu, self.user_params, |
| self.ad.sim_card) |
| set_usim_parameters(self.anritsu, self.ad.sim_card) |
| if is_ims_call or srvcc or csfb_type: |
| set_post_sim_params(self.anritsu, self.user_params, |
| self.ad.sim_card) |
| self.virtualPhoneHandle.auto_answer = (VirtualPhoneAutoAnswer.ON, |
| 2) |
| if srvcc != None: |
| if srvcc == "Alert": |
| self.anritsu.send_command("IMSCSCFAUTOANSWER 1,DISABLE") |
| self.anritsu.start_simulation() |
| self.anritsu.send_command("IMSSTARTVN 1") |
| self.anritsu.send_command("IMSSTARTVN 2") |
| self.anritsu.send_command("IMSSTARTVN 3") |
| check_ims_reg = True |
| check_ims_calling = True |
| else: |
| self.anritsu.start_simulation() |
| if is_ims_call or csfb_type: |
| self.anritsu.send_command("IMSSTARTVN 1") |
| self.anritsu.send_command("IMSSTARTVN 2") |
| self.anritsu.send_command("IMSSTARTVN 3") |
| |
| iterations = 1 |
| if self.stress_test_number > 0: |
| iterations = self.stress_test_number |
| successes = 0 |
| for i in range(1, iterations + 1): |
| if self.stress_test_number: |
| self.log.info( |
| "Running iteration {} of {}".format(i, iterations)) |
| # FIXME: There's no good reason why this must be true; |
| # I can only assume this was done to work around a problem |
| self.ad.droid.telephonyToggleDataConnection(False) |
| |
| # turn off all other BTS to ensure UE registers on BTS1 |
| sim_model = (self.anritsu.get_simulation_model()).split(",") |
| no_of_bts = len(sim_model) |
| for i in range(2, no_of_bts + 1): |
| self.anritsu.send_command( |
| "OUTOFSERVICE OUT,BTS{}".format(i)) |
| |
| if phone_setup_func is not None: |
| if not phone_setup_func(self.ad): |
| self.log.warning( |
| "phone_setup_func failed. Rebooting UE") |
| self.ad.reboot() |
| time.sleep(30) |
| if self.ad.sim_card == "VzW12349": |
| set_preferred_apn_by_adb(self.ad, "VZWINTERNET") |
| if not phone_setup_func(self.ad): |
| self.log.error("phone_setup_func failed.") |
| continue |
| |
| if is_wait_for_registration: |
| self.anritsu.wait_for_registration_state() |
| |
| if phone_idle_func_after_registration: |
| if not phone_idle_func_after_registration(self.log, |
| self.ad): |
| continue |
| |
| for i in range(2, no_of_bts + 1): |
| self.anritsu.send_command( |
| "OUTOFSERVICE IN,BTS{}".format(i)) |
| |
| time.sleep(WAIT_TIME_ANRITSU_REG_AND_CALL) |
| if srvcc: |
| if not ims_call_cs_teardown( |
| self.log, self.ad, self.anritsu, voice_number, |
| CALL_TEARDOWN_PHONE, False, check_ims_reg, |
| check_ims_calling, srvcc, mo, |
| WAIT_TIME_IN_CALL_FOR_IMS, WAIT_TIME_IN_CALL): |
| if mo: |
| self.log.error( |
| "Phone {} Failed to make voice call to {}" |
| .format(self.ad.serial, voice_number)) |
| else: |
| self.log.error( |
| "Phone {} failed to answer voice call." |
| .format(self.ad.serial)) |
| continue |
| else: |
| if not call_mo_setup_teardown( |
| self.log, self.ad, self.anritsu, voice_number, |
| CALL_TEARDOWN_PHONE, False, WAIT_TIME_IN_CALL, |
| is_ims_call): |
| self.log.error( |
| "Phone {} Failed to make voice call to {}" |
| .format(self.ad.serial, voice_number)) |
| continue |
| successes += 1 |
| if self.stress_test_number: |
| self.log.info("Passed iteration {}".format(i)) |
| if self.stress_test_number: |
| self.log.info("Total of {} successes out of {} attempts". |
| format(successes, iterations)) |
| return True if successes == iterations else False |
| |
| except AnritsuError as e: |
| self.log.error("Error in connection with Anritsu Simulator: " + |
| str(e)) |
| return False |
| except Exception as e: |
| self.log.error("Exception during voice call procedure: " + str(e)) |
| return False |
| return True |
| |
| def _phone_setup_lte_wcdma(self, ad): |
| toggle_volte(self.log, ad, False) |
| return ensure_network_rat( |
| self.log, |
| ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True) |
| |
| def _phone_setup_lte_1x(self, ad): |
| return ensure_network_rat( |
| self.log, |
| ad, |
| NETWORK_MODE_LTE_CDMA_EVDO, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True) |
| |
| def _phone_setup_wcdma(self, ad): |
| return ensure_network_rat( |
| self.log, |
| ad, |
| NETWORK_MODE_GSM_UMTS, |
| RAT_FAMILY_UMTS, |
| toggle_apm_after_setting=True) |
| |
| def _phone_setup_gsm(self, ad): |
| return ensure_network_rat( |
| self.log, |
| ad, |
| NETWORK_MODE_GSM_ONLY, |
| RAT_FAMILY_GSM, |
| toggle_apm_after_setting=True) |
| |
| def _phone_setup_1x(self, ad): |
| return ensure_network_rat( |
| self.log, |
| ad, |
| NETWORK_MODE_CDMA, |
| RAT_FAMILY_CDMA2000, |
| toggle_apm_after_setting=True) |
| |
| def _phone_setup_airplane_mode(self, ad): |
| return toggle_airplane_mode_by_adb(self.log, ad, True) |
| |
| def _phone_setup_volte_airplane_mode(self, ad): |
| toggle_volte(self.log, ad, True) |
| return toggle_airplane_mode_by_adb(self.log, ad, True) |
| |
| def _phone_setup_volte(self, ad): |
| ad.droid.telephonyToggleDataConnection(True) |
| toggle_volte(self.log, ad, True) |
| return ensure_network_rat( |
| self.log, |
| ad, |
| NETWORK_MODE_LTE_CDMA_EVDO_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True) |
| |
| """ Tests Begin """ |
| |
| @test_tracker_info(uuid="56c42e16-3936-4c51-8b8b-4866f54cc0bc") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_voice_call_lte_wcdma_csfb_redirection(self): |
| """ Test Voice call functionality on LTE (CSFB to WCDMA). |
| CSFB type is REDIRECTION |
| |
| Steps: |
| 1. Setup CallBox on LTE and WCDMA network, make sure DUT register on LTE network. |
| 2. Make an voice call to DEFAULT_CALL_NUMBER. Make sure DUT CSFB to WCDMA. |
| 3. Make sure Anritsu receives the call and accept. |
| 4. Tear down the call. |
| |
| Expected Results: |
| 2. Voice call succeed. DUT CSFB to WCDMA. |
| 3. Anritsu can accept the call. |
| 4. Tear down call succeed. |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| return self._setup_voice_call( |
| set_system_model_lte_wcdma, |
| self._phone_setup_lte_wcdma, |
| voice_number=self.voice_call_number, |
| csfb_type=CsfbType.CSFB_TYPE_REDIRECTION) |
| |
| @test_tracker_info(uuid="dcc1428f-9b7d-4064-8313-f1f5e428e0c7") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_voice_call_lte_wcdma_csfb_handover(self): |
| """ Test Voice call functionality on LTE (CSFB to WCDMA). |
| CSFB type is HANDOVER |
| |
| Steps: |
| 1. Setup CallBox on LTE and WCDMA network, make sure DUT register on LTE network. |
| 2. Make an voice call to DEFAULT_CALL_NUMBER. Make sure DUT CSFB to WCDMA. |
| 3. Make sure Anritsu receives the call and accept. |
| 4. Tear down the call. |
| |
| Expected Results: |
| 2. Voice call succeed. DUT CSFB to WCDMA. |
| 3. Anritsu can accept the call. |
| 4. Tear down call succeed. |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| return self._setup_voice_call( |
| set_system_model_lte_wcdma, |
| self._phone_setup_lte_wcdma, |
| voice_number=self.voice_call_number, |
| csfb_type=CsfbType.CSFB_TYPE_HANDOVER) |
| |
| @test_tracker_info(uuid="e250b134-d5e9-48ca-b224-eb0e07648275") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_voice_call_lte_1x_csfb(self): |
| """ Test Voice call functionality on LTE (CSFB to 1x). |
| |
| Steps: |
| 1. Setup CallBox on LTE and CDMA 1X network, make sure DUT register on LTE network. |
| 2. Make an voice call to DEFAULT_CALL_NUMBER. Make sure DUT CSFB to 1x. |
| 3. Make sure Anritsu receives the call and accept. |
| 4. Tear down the call. |
| |
| Expected Results: |
| 2. Voice call succeed. DUT CSFB to 1x. |
| 3. Anritsu can accept the call. |
| 4. Tear down call succeed. |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| return self._setup_voice_call( |
| set_system_model_lte_1x, |
| self._phone_setup_lte_1x, |
| voice_number=self.voice_call_number) |
| |
| @test_tracker_info(uuid="fcbe0f5d-51c2-46c8-8ff3-2daa1d91b936") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_voice_call_wcdma(self): |
| """ Test Voice call functionality on WCDMA |
| |
| Steps: |
| 1. Setup CallBox on WCDMA network, make sure DUT register on WCDMA network. |
| 2. Make an voice call to DEFAULT_CALL_NUMBER. |
| 3. Make sure Anritsu receives the call and accept. |
| 4. Tear down the call. |
| |
| Expected Results: |
| 2. Voice call succeed. |
| 3. Anritsu can accept the call. |
| 4. Tear down call succeed. |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| return self._setup_voice_call( |
| set_system_model_wcdma, |
| self._phone_setup_wcdma, |
| voice_number=self.voice_call_number) |
| |
| @test_tracker_info(uuid="077f851b-2c8e-4b1d-adc2-0326d3346157") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_voice_call_gsm(self): |
| """ Test Voice call functionality on GSM |
| |
| Steps: |
| 1. Setup CallBox on GSM network, make sure DUT register on GSM network. |
| 2. Make an voice call to DEFAULT_CALL_NUMBER. |
| 3. Make sure Anritsu receives the call and accept. |
| 4. Tear down the call. |
| |
| Expected Results: |
| 2. Voice call succeed. |
| 3. Anritsu can accept the call. |
| 4. Tear down call succeed. |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| return self._setup_voice_call( |
| set_system_model_gsm, |
| self._phone_setup_gsm, |
| voice_number=self.voice_call_number) |
| |
| @test_tracker_info(uuid="80376fb3-44fc-43b7-be99-2ccd3bd2913e") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_voice_call_1x(self): |
| """ Test Voice call functionality on CDMA 1X |
| |
| Steps: |
| 1. Setup CallBox on 1x network, make sure DUT register on 1x network. |
| 2. Make an voice call to DEFAULT_CALL_NUMBER. |
| 3. Make sure Anritsu receives the call and accept. |
| 4. Tear down the call. |
| |
| Expected Results: |
| 2. Voice call succeed. |
| 3. Anritsu can accept the call. |
| 4. Tear down call succeed. |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| return self._setup_voice_call( |
| set_system_model_1x, |
| self._phone_setup_1x, |
| voice_number=self.voice_call_number) |
| |
| @test_tracker_info(uuid="1f8ae218-042d-4114-9fc7-4401a503b3b4") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_voice_call_1x_evdo(self): |
| """ Test Voice call functionality on CDMA 1X with EVDO |
| |
| Steps: |
| 1. Setup CallBox on 1x and EVDO network, make sure DUT register on 1x network. |
| 2. Make an voice call to DEFAULT_CALL_NUMBER. |
| 3. Make sure Anritsu receives the call and accept. |
| 4. Tear down the call. |
| |
| Expected Results: |
| 2. Voice call succeed. |
| 3. Anritsu can accept the call. |
| 4. Tear down call succeed. |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| return self._setup_voice_call( |
| set_system_model_1x_evdo, |
| self._phone_setup_1x, |
| voice_number=self.voice_call_number) |
| |
| @test_tracker_info(uuid="7641ffc0-c1b3-42b8-92d6-00ae53719f8d") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_voice_call_volte_wcdma_srvcc(self): |
| """ Test Voice call functionality, |
| VoLTE to WCDMA SRVCC |
| Steps: |
| 1. Setup CallBox on VoLTE network with WCDMA. |
| 2. Turn on DUT and enable VoLTE. Make an voice call to DEFAULT_CALL_NUMBER. |
| 3. Check if VoLTE voice call connected successfully. |
| 4. Handover the call to WCDMA and check if the call is still up. |
| 5. Tear down the call. |
| |
| Expected Results: |
| 1. VoLTE Voice call is made successfully. |
| 2. After SRVCC, the DEFAULT_CALL_NUMBER call is not dropped. |
| 3. Tear down call succeed. |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| return self._setup_voice_call( |
| set_system_model_lte_wcdma, |
| self._phone_setup_volte, |
| phone_idle_volte, |
| srvcc="InCall", |
| voice_number=self.voice_call_number, |
| wait_time_in_call=WAIT_TIME_IN_CALL_FOR_IMS) |
| |
| @test_tracker_info(uuid="0d63e797-b4bc-4094-98c3-70060e5ea91b") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_voice_call_volte_gsm_srvcc(self): |
| """ Test Voice call functionality, |
| VoLTE to GSM SRVCC |
| Steps: |
| 1. Setup CallBox on VoLTE network with GSM. |
| 2. Turn on DUT and enable VoLTE. Make an voice call to DEFAULT_CALL_NUMBER. |
| 3. Check if VoLTE voice call connected successfully. |
| 4. Handover the call to GSM and check if the call is still up. |
| 5. Tear down the call. |
| |
| Expected Results: |
| 1. VoLTE Voice call is made successfully. |
| 2. After SRVCC, the DEFAULT_CALL_NUMBER call is not dropped. |
| 3. Tear down call succeed. |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| return self._setup_voice_call( |
| set_system_model_lte_gsm, |
| self._phone_setup_volte, |
| phone_idle_volte, |
| srvcc="InCall", |
| voice_number=self.voice_call_number, |
| wait_time_in_call=WAIT_TIME_IN_CALL_FOR_IMS) |
| |
| @test_tracker_info(uuid="f73f6cc0-79c8-47b3-9867-ea7390dfee41") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_voice_call_volte_wcdma_asrvcc(self): |
| """ Test Voice call functionality, |
| VoLTE to WCDMA aSRVCC |
| Steps: |
| 1. Setup CallBox on VoLTE network with WCDMA. |
| 2. Turn on DUT and enable VoLTE. Make an voice call to DEFAULT_CALL_NUMBER. |
| 3. Check if Virtual UA in CSCF server rings. |
| 4. Handover the call to WCDMA and check if the call is connected. |
| 5. Tear down the call. |
| |
| Expected Results: |
| 1. Virtual UA is rining. |
| 2. After aSRVCC, the DEFAULT_CALL_NUMBER call is connected. |
| 3. Tear down call succeed. |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| return self._setup_voice_call( |
| set_system_model_lte_wcdma, |
| self._phone_setup_volte, |
| phone_idle_volte, |
| srvcc="Alert", |
| voice_number=self.voice_call_number) |
| |
| @test_tracker_info(uuid="823e8e10-58bd-476d-ba4b-ec436ac424fb") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_voice_call_volte_gsm_asrvcc(self): |
| """ Test Voice call functionality, |
| VoLTE to GSM aSRVCC |
| Steps: |
| 1. Setup CallBox on VoLTE network with GSM. |
| 2. Turn on DUT and enable VoLTE. Make an voice call to DEFAULT_CALL_NUMBER. |
| 3. Check if Virtual UA in CSCF server rings. |
| 4. Handover the call to GSM and check if the call is connected. |
| 5. Tear down the call. |
| |
| Expected Results: |
| 1. Virtual UA is rining. |
| 2. After aSRVCC, the DEFAULT_CALL_NUMBER call is connected. |
| 3. Tear down call succeed. |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| return self._setup_voice_call( |
| set_system_model_lte_gsm, |
| self._phone_setup_volte, |
| phone_idle_volte, |
| srvcc="Alert", |
| voice_number=self.voice_call_number, |
| wait_time_in_call=WAIT_TIME_IN_CALL_FOR_IMS) |
| |
| @test_tracker_info(uuid="cd066cb1-6d12-4e29-90b9-f44054f00a00") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_voice_call_volte_wcdma_asrvcc_mt(self): |
| """ Test Voice call functionality, |
| MT VoLTE to WCDMA aSRVCC |
| Steps: |
| 1. Setup CallBox on VoLTE network with WCDMA. |
| 2. Turn on DUT and enable VoLTE. Make a VoLTE call from MD8475A to UE. |
| 3. Check if Virtual UA in CSCF server calling. |
| 4. Handover the call to WCDMA and check if the call is connected. |
| 5. Tear down the call. |
| |
| Expected Results: |
| 1. Virtual UA is rining. |
| 2. After aSRVCC, the DEFAULT_CALL_NUMBER call is connected. |
| 3. Tear down call succeed. |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| return self._setup_voice_call( |
| set_system_model_lte_wcdma, |
| self._phone_setup_volte, |
| phone_idle_volte, |
| srvcc="Alert", |
| mo=False, |
| voice_number=self.voice_call_number) |
| |
| @test_tracker_info(uuid="b23ebec3-7e5c-4aca-a749-e34307c56d58") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_voice_call_volte_gsm_asrvcc_mt(self): |
| """ Test Voice call functionality, |
| MT VoLTE to GSM aSRVCC |
| Steps: |
| 1. Setup CallBox on VoLTE network with GSM. |
| 2. Turn on DUT and enable VoLTE. Make a VoLTE call from MD8475A to UE. |
| 3. Check if Virtual UA in CSCF server calling. |
| 4. Handover the call to GSM and check if the call is connected. |
| 5. Tear down the call. |
| |
| Expected Results: |
| 1. Virtual UA is rining. |
| 2. After aSRVCC, the DEFAULT_CALL_NUMBER call is connected. |
| 3. Tear down call succeed. |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| return self._setup_voice_call( |
| set_system_model_lte_gsm, |
| self._phone_setup_volte, |
| phone_idle_volte, |
| srvcc="Alert", |
| mo=False, |
| voice_number=self.voice_call_number, |
| wait_time_in_call=WAIT_TIME_IN_CALL_FOR_IMS) |
| |
| @test_tracker_info(uuid="b81b3a0e-a7e3-4b30-889f-7c015bdc6980") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_voice_call_volte(self): |
| """ Test Voice call functionality on VoLTE |
| |
| Steps: |
| 1. Setup CallBox on VoLTE network. |
| 2. Turn on DUT and enable VoLTE. Make an voice call to DEFAULT_CALL_NUMBER. |
| 3. Make sure Anritsu receives the call and accept. |
| 4. Tear down the call. |
| |
| Expected Results: |
| 2. Voice call succeed. |
| 3. Anritsu can accept the call. |
| 4. Tear down call succeed. |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| return self._setup_voice_call( |
| set_system_model_lte, |
| self._phone_setup_volte, |
| phone_idle_volte, |
| is_ims_call=True, |
| voice_number=self.voice_call_number, |
| wait_time_in_call=WAIT_TIME_IN_CALL_FOR_IMS) |
| |
| """ Tests End """ |
