| #!/usr/bin/env python3.4 |
| # |
| # Copyright 2021 - Google |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| """ |
| Test Script for 5G IMS Settings scenarios |
| """ |
| |
| from acts import signals |
| from acts.test_decorators import test_tracker_info |
| from acts_contrib.test_utils.tel.TelephonyBaseTest import TelephonyBaseTest |
| from acts_contrib.test_utils.tel.tel_defines import CarrierConfigs |
| from acts_contrib.test_utils.tel.tel_defines import CAPABILITY_VOLTE |
| from acts_contrib.test_utils.tel.tel_defines import CAPABILITY_WFC |
| from acts_contrib.test_utils.tel.tel_defines import RAT_NR |
| from acts_contrib.test_utils.tel.tel_defines import WFC_MODE_WIFI_PREFERRED |
| from acts_contrib.test_utils.tel.tel_defines import WFC_MODE_CELLULAR_PREFERRED |
| from acts_contrib.test_utils.tel.tel_phone_setup_utils import phone_setup_on_rat |
| from acts_contrib.test_utils.tel.tel_subscription_utils import get_outgoing_voice_sub_id |
| from acts_contrib.test_utils.tel.tel_test_utils import dumpsys_carrier_config |
| from acts_contrib.test_utils.tel.tel_voice_utils import change_ims_setting |
| |
| |
| class Nsa5gImsSettingsTest(TelephonyBaseTest): |
| |
| def setup_class(self): |
| TelephonyBaseTest.setup_class(self) |
| self.dut = self.android_devices[0] |
| self.dut_client = self.android_devices[1] |
| self.skip_reset_between_cases = False |
| self.subid = get_outgoing_voice_sub_id(self.dut) |
| self.dut_capabilities = self.dut.telephony["subscription"][ |
| self.subid].get("capabilities", []) |
| self.dut.log.info("DUT capabilities: %s", self.dut_capabilities) |
| if CAPABILITY_VOLTE not in self.dut_capabilities: |
| raise signals.TestAbortClass("VoLTE is not supported") |
| if CAPABILITY_WFC not in self.dut_capabilities: |
| raise signals.TestAbortClass("WFC is not supported") |
| self.carrier_configs = dumpsys_carrier_config(self.dut)[self.subid] |
| self.default_wfc_mode = self.carrier_configs.get( |
| CarrierConfigs.DEFAULT_WFC_IMS_MODE_INT, None) |
| self.dut_wfc_modes = self.dut.telephony[ |
| "subscription"][self.subid].get("wfc_modes", []) |
| |
| |
| """ Tests Begin """ |
| |
| @test_tracker_info(uuid="9ed17e7b-c933-4b46-9349-a76fbcba3a24") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_5g_nsa_volte_wifi_connected_toggle_wfc(self): |
| """Test for WiFi Calling settings: |
| nsa 5G + VoLTE Enabled + WiFi Connected, Toggling WFC |
| |
| Steps: |
| 1. Setup DUT Idle, 5G network type, VoLTE enabled. |
| 2. Make sure DUT WiFi connected, WFC disabled. |
| 3. Set DUT WFC enabled (WiFi Preferred), verify DUT WFC available, |
| report iwlan rat. |
| 4. Set DUT WFC disabled, verify DUT WFC unavailable, |
| not report iwlan rat. |
| |
| Expected Results: |
| 3. DUT WiFi Calling feature bit return True, network rat is iwlan. |
| 4. DUT WiFi Calling feature bit return False, network rat is not iwlan. |
| """ |
| |
| if not phone_setup_on_rat(self.log, self.dut, rat='5g_volte'): |
| self.log.error("Phone Failed to setup Properly") |
| return False |
| |
| if not change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| subid=self.subid, |
| dut_capabilities=self.dut_capabilities, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=True, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode=self.default_wfc_mode): |
| return False |
| if not change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=True, |
| wfc_enabled=False, |
| nw_gen=RAT_NR, |
| wfc_mode=None): |
| return False |
| return change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=True, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode=None) |
| |
| |
| @test_tracker_info(uuid="425b16ec-869d-4a0b-a1bc-a3243503525f") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_5g_nsa_wifi_connected_toggle_wfc(self): |
| """Test for WiFi Calling settings: |
| nsa 5G + VoLTE Disabled + WiFi Connected, Toggling WFC |
| |
| Steps: |
| 1. Setup DUT Idle, nsa 5G network type, VoLTE disabled. |
| 2. Make sure DUT WiFi connected, WFC disabled. |
| 3. Set DUT WFC enabled (WiFi Preferred), verify DUT WFC available, |
| report iwlan rat. |
| 4. Set DUT WFC disabled, verify DUT WFC unavailable, |
| not report iwlan rat. |
| |
| Expected Results: |
| 3. DUT WiFi Calling feature bit return True, network rat is iwlan. |
| 4. DUT WiFi Calling feature bit return False, network rat is not iwlan. |
| """ |
| |
| if not phone_setup_on_rat(self.log, self.dut, rat='5g_csfb'): |
| self.log.error("Phone Failed to setup Properly") |
| return False |
| |
| if not change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=False, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode=self.default_wfc_mode): |
| return False |
| if not change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=False, |
| wfc_enabled=False, |
| nw_gen=RAT_NR, |
| wfc_mode=None): |
| return False |
| return change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=False, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode=None) |
| |
| |
| @test_tracker_info(uuid="9405d8cf-5b73-4d47-a83d-da115caed177") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_5g_nsa_volte_wfc_enabled_toggle_wifi(self): |
| """Test for WiFi Calling settings: |
| nsa 5G + VoLTE Enabled + WFC enabled, Toggling WiFi |
| |
| Steps: |
| 1. Setup DUT Idle, nsa 5G network type, VoLTE enabled. |
| 2. Make sure DUT WiFi disconnected, WFC enabled (WiFi Preferred). |
| 3. DUT connect WiFi, verify DUT WFC available, report iwlan rat. |
| 4. DUT disconnect WiFi,verify DUT WFC unavailable, not report iwlan rat. |
| |
| Expected Results: |
| 3. DUT WiFi Calling feature bit return True, network rat is iwlan. |
| 4. DUT WiFi Calling feature bit return False, network rat is not iwlan. |
| """ |
| if not phone_setup_on_rat(self.log, self.dut, rat='5g_volte'): |
| self.log.error("Phone Failed to setup Properly") |
| return False |
| |
| if not change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=True, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode=self.default_wfc_mode): |
| return False |
| if not change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=True, |
| wfc_enabled=False, |
| nw_gen=RAT_NR, |
| wfc_mode=None): |
| return False |
| return change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=True, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode=None) |
| |
| |
| @test_tracker_info(uuid="548f07a6-74e2-4071-ba41-2acf3cd51752") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_5g_nsa_wfc_enabled_toggle_wifi(self): |
| """Test for WiFi Calling settings: |
| nsa 5G + VoLTE Disabled + WFC enabled, Toggling WiFi |
| |
| Steps: |
| 1. Setup DUT Idle, nsa 5G network type, VoLTE disabled. |
| 2. Make sure DUT WiFi disconnected, WFC enabled (WiFi Preferred). |
| 3. DUT connect WiFi, verify DUT WFC available, report iwlan rat. |
| 4. DUT disconnect WiFi,verify DUT WFC unavailable, not report iwlan rat. |
| |
| Expected Results: |
| 3. DUT WiFi Calling feature bit return True, network rat is iwlan. |
| 4. DUT WiFi Calling feature bit return False, network rat is not iwlan. |
| """ |
| if not phone_setup_on_rat(self.log, self.dut, rat='5g_csfb'): |
| self.log.error("Phone Failed to setup Properly") |
| return False |
| |
| if not change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=False, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode=self.default_wfc_mode): |
| return False |
| if not change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=False, |
| volte_enabled=False, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode=None): |
| return False |
| return change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=False, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode=None) |
| |
| |
| @test_tracker_info(uuid="f53f8403-b993-4a3b-8d3f-ffc87cdc856e") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_5g_nsa_wfc_enabled_wifi_connected_toggle_volte(self): |
| """Test for WiFi Calling settings: |
| nsa 5G + VoLTE Enabled + WiFi Connected + WFC enabled, toggle VoLTE setting |
| |
| Steps: |
| 1. Setup DUT Idle, 5G network type, VoLTE enabled. |
| 2. Make sure DUT WiFi connected, WFC enabled (WiFi Preferred). |
| Verify DUT WFC available, report iwlan rat. |
| 3. Disable VoLTE on DUT, verify in 2 minutes period, |
| DUT does not lost WiFi Calling, DUT still report WFC available, |
| rat iwlan. |
| 4. Enable VoLTE on DUT, verify in 2 minutes period, |
| DUT does not lost WiFi Calling, DUT still report WFC available, |
| rat iwlan. |
| |
| Expected Results: |
| 2. DUT WiFi Calling feature bit return True, network rat is iwlan. |
| 3. DUT WiFi Calling feature bit return True, network rat is iwlan. |
| 4. DUT WiFi Calling feature bit return True, network rat is iwlan. |
| """ |
| if not phone_setup_on_rat(self.log, self.dut, rat='5g_volte'): |
| self.log.error("Phone Failed to setup Properly") |
| return False |
| |
| if not change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=True, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode=self.default_wfc_mode): |
| return False |
| if not change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=False, |
| wfc_enabled=True, |
| wfc_mode=None): |
| return False |
| return change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=True, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode=None) |
| |
| |
| @test_tracker_info(uuid="9d951951-bc04-4db1-85e3-f0980f564fd3") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_5g_nsa_volte_wfc_wifi_preferred_to_cellular_preferred(self): |
| """Test for WiFi Calling settings: |
| nsa 5G + VoLTE Enabled + WiFi Connected + WiFi Preferred, |
| change WFC to Cellular Preferred |
| |
| Steps: |
| 1. Setup DUT Idle, nsa 5G network type, VoLTE enabled. |
| 2. Make sure DUT WiFi connected, WFC is set to WiFi Preferred. |
| Verify DUT WFC available, report iwlan rat. |
| 3. Change WFC setting to Cellular Preferred. |
| 4. Verify DUT report WFC not available. |
| |
| Expected Results: |
| 2. DUT WiFi Calling feature bit return True, network rat is iwlan. |
| 4. DUT WiFI Calling feature bit return False, network rat is not iwlan. |
| """ |
| if WFC_MODE_WIFI_PREFERRED not in self.dut_wfc_modes: |
| raise signals.TestSkip("WFC_MODE_WIFI_PREFERRED is not supported") |
| if WFC_MODE_CELLULAR_PREFERRED not in self.dut_wfc_modes: |
| raise signals.TestSkip( |
| "WFC_MODE_CELLULAR_PREFERRED is not supported") |
| |
| if not phone_setup_on_rat(self.log, self.dut, rat='5g_volte'): |
| self.log.error("Phone Failed to setup Properly") |
| return False |
| |
| if not change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=True, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode=self.default_wfc_mode): |
| return False |
| return change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=True, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode= WFC_MODE_CELLULAR_PREFERRED) |
| |
| |
| @test_tracker_info(uuid="9d951951-bc04-4db1-85e3-f0980f564fd3") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_5g_nsa_wfc_wifi_preferred_to_cellular_preferred(self): |
| """Test for WiFi Calling settings: |
| nsa 5G + WiFi Connected + WiFi Preferred, change WFC to Cellular Preferred |
| |
| Steps: |
| 1. Setup DUT Idle, nsa 5G network type, VoLTE disabled. |
| 2. Make sure DUT WiFi connected, WFC is set to WiFi Preferred. |
| Verify DUT WFC available, report iwlan rat. |
| 3. Change WFC setting to Cellular Preferred. |
| 4. Verify DUT report WFC not available. |
| |
| Expected Results: |
| 2. DUT WiFi Calling feature bit return True, network rat is iwlan. |
| 4. DUT WiFI Calling feature bit return False, network rat is not iwlan. |
| """ |
| if WFC_MODE_WIFI_PREFERRED not in self.dut_wfc_modes: |
| raise signals.TestSkip("WFC_MODE_WIFI_PREFERRED is not supported") |
| if WFC_MODE_CELLULAR_PREFERRED not in self.dut_wfc_modes: |
| raise signals.TestSkip( |
| "WFC_MODE_CELLULAR_PREFERRED is not supported") |
| |
| if not phone_setup_on_rat(self.log, self.dut, rat='5g_csfb'): |
| self.log.error("Phone Failed to setup Properly") |
| return False |
| |
| if not change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=False, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode= WFC_MODE_WIFI_PREFERRED): |
| return False |
| return change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=False, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode= WFC_MODE_CELLULAR_PREFERRED) |
| |
| |
| @test_tracker_info(uuid="bb3acfce-1ea9-40c2-9151-12fbc235e359") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_5g_nsa_volte_wfc_cellular_preferred_to_wifi_preferred(self): |
| """Test for WiFi Calling settings: |
| nsa 5G + VoLTE Enabled + WiFi Connected + Cellular Preferred, |
| change WFC to WiFi Preferred |
| |
| Steps: |
| 1. Setup DUT Idle, nsa 5G network type, VoLTE enabled. |
| 2. Make sure DUT WiFi connected, WFC is set to Cellular Preferred. |
| Verify DUT WFC not available. |
| 3. Change WFC setting to WiFi Preferred. |
| 4. Verify DUT report WFC available. |
| |
| Expected Results: |
| 2. DUT WiFi Calling feature bit return False, network rat is not iwlan. |
| 4. DUT WiFI Calling feature bit return True, network rat is iwlan. |
| """ |
| if WFC_MODE_WIFI_PREFERRED not in self.dut_wfc_modes: |
| raise signals.TestSkip("WFC_MODE_WIFI_PREFERRED is not supported") |
| if WFC_MODE_CELLULAR_PREFERRED not in self.dut_wfc_modes: |
| raise signals.TestSkip( |
| "WFC_MODE_CELLULAR_PREFERRED is not supported") |
| if not phone_setup_on_rat(self.log, self.dut, rat='5g_volte'): |
| self.log.error("Phone Failed to setup Properly") |
| return False |
| |
| if not change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=True, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode= WFC_MODE_CELLULAR_PREFERRED): |
| return False |
| return change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=True, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode=WFC_MODE_WIFI_PREFERRED) |
| |
| |
| @test_tracker_info(uuid="d4dea8e0-5795-4769-80e2-29c0f951a84a") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_5g_nsa_wfc_cellular_preferred_to_wifi_preferred(self): |
| """Test for WiFi Calling settings: |
| nsa 5G + WiFi Connected + Cellular Preferred, change WFC to WiFi Preferred |
| |
| Steps: |
| 1. Setup DUT Idle, nsa 5G network type, VoLTE disabled. |
| 2. Make sure DUT WiFi connected, WFC is set to Cellular Preferred. |
| Verify DUT WFC not available. |
| 3. Change WFC setting to WiFi Preferred. |
| 4. Verify DUT report WFC available. |
| |
| Expected Results: |
| 2. DUT WiFi Calling feature bit return False, network rat is not iwlan. |
| 4. DUT WiFI Calling feature bit return True, network rat is iwlan. |
| """ |
| if WFC_MODE_WIFI_PREFERRED not in self.dut_wfc_modes: |
| raise signals.TestSkip("WFC_MODE_WIFI_PREFERRED is not supported") |
| if WFC_MODE_CELLULAR_PREFERRED not in self.dut_wfc_modes: |
| raise signals.TestSkip( |
| "WFC_MODE_CELLULAR_PREFERRED is not supported") |
| |
| if not phone_setup_on_rat(self.log, self.dut, rat='5g_csfb'): |
| self.log.error("Phone Failed to setup Properly") |
| return False |
| |
| if not change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=False, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode=WFC_MODE_CELLULAR_PREFERRED): |
| return False |
| return change_ims_setting(log=self.log, |
| ad=self.dut, |
| dut_client= self.dut_client, |
| wifi_network_ssid=self.wifi_network_ssid, |
| wifi_network_pass=self.wifi_network_pass, |
| dut_capabilities=self.dut_capabilities, |
| subid=self.subid, |
| airplane_mode=False, |
| wifi_enabled=True, |
| volte_enabled=False, |
| wfc_enabled=True, |
| nw_gen=RAT_NR, |
| wfc_mode=WFC_MODE_WIFI_PREFERRED) |
| |
| |
