| #!/usr/bin/env python3 |
| # |
| # Copyright 2016 - The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| """ |
| Test Script for Telephony Pre Check In Sanity |
| """ |
| |
| import math |
| import time |
| from acts.test_decorators import test_tracker_info |
| from acts.controllers.anritsu_lib._anritsu_utils import AnritsuError |
| from acts.controllers.anritsu_lib.md8475a import CTCHSetup |
| from acts.controllers.anritsu_lib.md8475a import BtsBandwidth |
| from acts.controllers.anritsu_lib.md8475a import BtsPacketRate |
| from acts.controllers.anritsu_lib.md8475a import BtsServiceState |
| from acts.controllers.anritsu_lib.md8475a import MD8475A |
| from acts.controllers.anritsu_lib.mg3710a import MG3710A |
| from acts_contrib.test_utils.tel.anritsu_utils import LTE_BAND_2 |
| from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_gsm |
| from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_lte |
| from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_lte_lte |
| from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_lte_wcdma |
| from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_wcdma |
| from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_wcdma_gsm |
| from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_wcdma_wcdma |
| from acts_contrib.test_utils.tel.anritsu_utils import set_usim_parameters |
| from acts_contrib.test_utils.tel.tel_defines import NETWORK_MODE_CDMA |
| from acts_contrib.test_utils.tel.tel_defines import NETWORK_MODE_GSM_ONLY |
| from acts_contrib.test_utils.tel.tel_defines import NETWORK_MODE_GSM_UMTS |
| from acts_contrib.test_utils.tel.tel_defines import NETWORK_MODE_LTE_GSM_WCDMA |
| from acts_contrib.test_utils.tel.tel_defines import RAT_FAMILY_CDMA2000 |
| from acts_contrib.test_utils.tel.tel_defines import RAT_FAMILY_GSM |
| from acts_contrib.test_utils.tel.tel_defines import RAT_FAMILY_LTE |
| from acts_contrib.test_utils.tel.tel_defines import RAT_FAMILY_UMTS |
| from acts_contrib.test_utils.tel.tel_phone_setup_utils import ensure_network_rat |
| from acts_contrib.test_utils.tel.tel_phone_setup_utils import ensure_phones_idle |
| from acts_contrib.test_utils.tel.tel_test_utils import toggle_airplane_mode |
| from acts_contrib.test_utils.tel.TelephonyBaseTest import TelephonyBaseTest |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| gsm_band850_ch128_fr869_cid58_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| gsm_band850_ch251_fr893_cid59_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| gsm_band1900_ch512_fr1930_cid51_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| gsm_band1900_ch512_fr1930_cid52_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| gsm_band1900_ch512_fr1930_cid53_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| gsm_band1900_ch512_fr1930_cid54_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| gsm_band1900_ch640_fr1955_cid56_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| gsm_band1900_ch750_fr1977_cid57_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| lte_band2_ch900_fr1960_pcid9_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| lte_band4_ch2000_fr2115_pcid1_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| lte_band4_ch2000_fr2115_pcid2_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| lte_band4_ch2000_fr2115_pcid3_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| lte_band4_ch2000_fr2115_pcid4_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| lte_band4_ch2050_fr2120_pcid7_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| lte_band4_ch2050_fr2120_pcid7_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| lte_band4_ch2250_fr2140_pcid8_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| lte_band12_ch5095_fr737_pcid10_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| wcdma_band1_ch10700_fr2140_cid31_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| wcdma_band1_ch10700_fr2140_cid32_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| wcdma_band1_ch10700_fr2140_cid33_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| wcdma_band1_ch10700_fr2140_cid34_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| wcdma_band1_ch10575_fr2115_cid36_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| wcdma_band1_ch10800_fr2160_cid37_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| wcdma_band2_ch9800_fr1960_cid38_cell |
| from acts.controllers.anritsu_lib.cell_configurations import \ |
| wcdma_band2_ch9900_fr1980_cid39_cell |
| |
| |
| class TelLabNeighborCellTest(TelephonyBaseTest): |
| |
| # This is the default offset between CallBox Power Level and Phone measure |
| # Power Level. |
| # TODO: Probably need to further tune those values. |
| _LTE_RSSI_OFFSET = -39 |
| _WCDMA_RSSI_OFFSET = -31 |
| _GSM_RSSI_OFFSET = -30 |
| |
| _ANRITSU_SETTLING_TIME = 15 |
| _SETTLING_TIME = 75 |
| _LTE_MCS_DL = 5 |
| _LTE_MCS_UL = 5 |
| _NRB_DL = 50 |
| _NRB_UL = 50 |
| _CELL_PARAM_FILE = 'C:\\MX847570\\CellParam\\NEIGHBOR_CELL_TEST_TMO.wnscp' |
| |
| # Below are keys should be included in expected cell info. |
| # TARGET_RSSI: This is expected RSSI. |
| TARGET_RSSI = 'target_rssi' |
| # MAX_ERROR_RSSI: This is max error between 'each sample of reported RSSI' |
| # and 'expected RSSI' |
| MAX_ERROR_RSSI = 'max_error_rssi' |
| # MAX_ERROR_AVERAGE_RSSI: This is max error between |
| # 'average value of reported RSSI' and 'expected RSSI' |
| MAX_ERROR_AVERAGE_RSSI = 'max_error_average_rssi' |
| # REPORT_RATE: expected report rate for neighbor cell. |
| REPORT_RATE = 'report_rate' |
| # RAT: expected network rat. |
| RAT = 'rat' |
| # IS_REGISTERED: is the cell registered. |
| # For serving cell, this value should be True; for neighbor cell, should be |
| # False |
| IS_REGISTERED = 'registered' |
| # CID: cell CID info. |
| CID = 'cid' |
| # PCID: cell PCID info. |
| PCID = 'pcid' |
| # PSC: cell PSC info. |
| PSC = 'psc' |
| |
| # Keys for calculate average RSSI. Only used in _verify_cell_info |
| RSSI = 'rssi' |
| COUNT = 'count' |
| |
| # Pre-defined invalid value. If this value is reported in cell info, just |
| # discard this value. E.g. if in reported cell info, cid is reported as |
| # 0x7fffffff, need to discard this value when calculating unique_id |
| INVALID_VALUE = 0x7fffffff |
| |
| def setup_class(self): |
| super().setup_class() |
| self.ad = self.android_devices[0] |
| self.ad.sim_card = getattr(self.ad, "sim_card", None) |
| self.md8475a_ip_address = self.user_params[ |
| "anritsu_md8475a_ip_address"] |
| self.mg3710a_ip_address = self.user_params[ |
| "anritsu_mg3710a_ip_address"] |
| self.wlan_option = self.user_params.get("anritsu_wlan_option", False) |
| self.md8475_version = self.user_params.get("md8475", "A") |
| |
| if "lte_rssi_offset" in self.user_params: |
| self._LTE_RSSI_OFFSET = int(self.user_params["lte_rssi_offset"]) |
| if "wcdma_rssi_offset" in self.user_params: |
| self._WCDMA_RSSI_OFFSET = int(self.user_params[ |
| "wcdma_rssi_offset"]) |
| if "gsm_rssi_offset" in self.user_params: |
| self._GSM_RSSI_OFFSET = int(self.user_params["gsm_rssi_offset"]) |
| |
| self.md8475a = None |
| self.mg3710a = None |
| try: |
| self.md8475a = MD8475A(self.md8475a_ip_address, self.wlan_option, |
| self.md8475_version) |
| except AnritsuError as e: |
| self.log.error("Error in connecting to Anritsu MD8475A:{}".format( |
| e)) |
| return False |
| |
| try: |
| self.mg3710a = MG3710A(self.mg3710a_ip_address) |
| except AnritsuError as e: |
| self.log.error("Error in connecting to Anritsu MG3710A :{}".format( |
| e)) |
| return False |
| return True |
| |
| def setup_test(self): |
| self.turn_off_3710a_sg(1) |
| self.turn_off_3710a_sg(2) |
| self.mg3710a.set_arb_pattern_aorb_state("A", "OFF", 1) |
| self.mg3710a.set_arb_pattern_aorb_state("B", "OFF", 1) |
| self.mg3710a.set_arb_pattern_aorb_state("A", "OFF", 2) |
| self.mg3710a.set_arb_pattern_aorb_state("B", "OFF", 2) |
| self.mg3710a.set_freq_relative_display_status("OFF", 1) |
| self.mg3710a.set_freq_relative_display_status("OFF", 2) |
| self.ad.droid.telephonySetPreferredNetworkTypes( |
| NETWORK_MODE_LTE_GSM_WCDMA) |
| ensure_phones_idle(self.log, self.android_devices) |
| toggle_airplane_mode(self.log, self.ad, True) |
| self.ad.droid.telephonyToggleDataConnection(True) |
| self.ad.adb.shell("setprop net.lte.ims.volte.provisioned 1", |
| ignore_status=True) |
| return True |
| |
| def teardown_test(self): |
| toggle_airplane_mode(self.log, self.ad, True) |
| self.turn_off_3710a_sg(1) |
| self.turn_off_3710a_sg(2) |
| self.log.info("Stopping Simulation") |
| self.md8475a.stop_simulation() |
| return True |
| |
| def teardown_class(self): |
| if self.md8475a is not None: |
| self.md8475a.disconnect() |
| if self.mg3710a is not None: |
| self.mg3710a.disconnect() |
| return True |
| |
| def _setup_lte_serving_cell(self, bts, dl_power, cell_id, physical_cellid): |
| bts.output_level = dl_power |
| bts.bandwidth = BtsBandwidth.LTE_BANDWIDTH_10MHz |
| bts.packet_rate = BtsPacketRate.LTE_MANUAL |
| bts.lte_mcs_dl = self._LTE_MCS_DL |
| bts.lte_mcs_ul = self._LTE_MCS_UL |
| bts.nrb_dl = self._NRB_DL |
| bts.nrb_ul = self._NRB_UL |
| bts.cell_id = cell_id |
| bts.physical_cellid = physical_cellid |
| bts.neighbor_cell_mode = "DEFAULT" |
| |
| def _setup_lte_neighbhor_cell_md8475a(self, bts, band, dl_power, cell_id, |
| physical_cellid): |
| bts.output_level = dl_power |
| bts.band = band |
| bts.bandwidth = BtsBandwidth.LTE_BANDWIDTH_10MHz |
| bts.cell_id = cell_id |
| bts.physical_cellid = physical_cellid |
| bts.neighbor_cell_mode = "DEFAULT" |
| bts.packet_rate = BtsPacketRate.LTE_MANUAL |
| bts.lte_mcs_dl = self._LTE_MCS_DL |
| bts.lte_mcs_ul = self._LTE_MCS_UL |
| bts.nrb_dl = self._NRB_DL |
| bts.nrb_ul = self._NRB_UL |
| |
| def _setup_wcdma_serving_cell(self, bts, dl_power, cell_id): |
| bts.output_level = dl_power |
| bts.cell_id = cell_id |
| bts.neighbor_cell_mode = "DEFAULT" |
| |
| def _setup_wcdma_neighbhor_cell_md8475a(self, bts, band, dl_power, |
| cell_id): |
| bts.output_level = dl_power |
| bts.band = band |
| bts.cell_id = cell_id |
| bts.neighbor_cell_mode = "DEFAULT" |
| |
| def _setup_lte_cell_md8475a(self, bts, params, dl_power): |
| bts.output_level = dl_power |
| bts.band = params['band'] |
| bts.bandwidth = params['bandwidth'] |
| bts.cell_id = params['cid'] |
| bts.physical_cellid = params['pcid'] |
| bts.mcc = params['mcc'] |
| bts.mnc = params['mnc'] |
| bts.tac = params['tac'] |
| bts.neighbor_cell_mode = "DEFAULT" |
| bts.dl_channel = params['channel'] |
| bts.packet_rate = BtsPacketRate.LTE_MANUAL |
| bts.lte_mcs_dl = self._LTE_MCS_DL |
| bts.lte_mcs_ul = self._LTE_MCS_UL |
| bts.nrb_dl = self._NRB_DL |
| bts.nrb_ul = self._NRB_UL |
| |
| def _setup_wcdma_cell_md8475a(self, bts, params, dl_power): |
| bts.output_level = dl_power |
| bts.band = params['band'] |
| bts.cell_id = params['cid'] |
| bts.mcc = params['mcc'] |
| bts.mnc = params['mnc'] |
| bts.lac = params['lac'] |
| bts.rac = params['rac'] |
| bts.neighbor_cell_mode = "DEFAULT" |
| bts.primary_scrambling_code = params['psc'] |
| bts.dl_channel = params['channel'] |
| |
| def _setup_gsm_cell_md8475a(self, bts, params, dl_power): |
| bts.output_level = params['power'] |
| bts.band = params['band'] |
| bts.cell_id = params['cid'] |
| bts.mcc = params['mcc'] |
| bts.mnc = params['mnc'] |
| bts.lac = params['lac'] |
| bts.rac = params['rac'] |
| bts.neighbor_cell_mode = "DEFAULT" |
| |
| def setup_3710a_waveform(self, sg_number, memory, frequency, power_level, |
| wave_package_name, wave_pattern_name): |
| self.mg3710a.set_frequency(frequency, sg_number) |
| self.mg3710a.set_arb_state("ON", sg_number) |
| self.mg3710a.set_arb_combination_mode("EDIT", sg_number) |
| self.mg3710a.select_waveform(wave_package_name, wave_pattern_name, |
| memory, sg_number) |
| self.mg3710a.set_arb_pattern_aorb_state(memory, "ON", sg_number) |
| self.mg3710a.set_arb_level_aorb(memory, power_level, sg_number) |
| |
| def turn_on_3710a_sg(self, sg_number): |
| self.mg3710a.set_modulation_state("ON", sg_number) |
| self.mg3710a.set_rf_output_state("ON", sg_number) |
| |
| def turn_off_3710a_sg(self, sg_number): |
| self.mg3710a.set_modulation_state("OFF", sg_number) |
| self.mg3710a.set_rf_output_state("OFF", sg_number) |
| |
| def _is_matching_cell(self, expected_cell_info, input_cell_info): |
| """Return if 'input_cell_info' matches 'expected_cell_info'. |
| |
| Args: |
| expected_cell_info: expected cell info. (dictionary) |
| input_cell_info: input cell info to test. (dictionary) |
| |
| Returns: |
| True if: |
| for each key in key_list, if key exist in expected_cell_info, |
| it should also exist in input_cell_info, and the values should |
| equal in expected_cell_info and input_cell_info |
| False otherwise. |
| """ |
| for key in [ |
| self.CID, self.PCID, self.RAT, self.PSC, self.IS_REGISTERED |
| ]: |
| if key in expected_cell_info: |
| if key not in input_cell_info: |
| return False |
| if input_cell_info[key] != expected_cell_info[key]: |
| return False |
| return True |
| |
| def _unique_cell_id(self, input_cell_info): |
| """Get the unique id for cell_info, based on cid, pcid, rat, psc and |
| is_registered. |
| |
| Args: |
| input_cell_info: cell info to get unique id. |
| |
| Returns: |
| unique id (string) |
| """ |
| unique_id = "" |
| for key in [ |
| self.CID, self.PCID, self.RAT, self.PSC, self.IS_REGISTERED |
| ]: |
| if key in input_cell_info: |
| if input_cell_info[key] != self.INVALID_VALUE: |
| unique_id += key + ":" + str(input_cell_info[key]) + ":" |
| return unique_id |
| |
| def _get_rssi_from_cell_info(self, cell_info): |
| """Return the RSSI value reported in cell_info. |
| |
| Args: |
| cell_info: cell info to get RSSI. |
| |
| Returns: |
| RSSI reported in this cell info. |
| """ |
| rat_to_rssi_tbl = { |
| 'lte': 'rsrp', |
| 'wcdma': 'signal_strength', |
| 'gsm': 'signal_strength' |
| } |
| try: |
| return cell_info[rat_to_rssi_tbl[cell_info[self.RAT]]] |
| except KeyError: |
| return None |
| |
| def _is_rssi_in_expected_range(self, actual_rssi, expected_rssi, |
| max_error): |
| """Return if actual_rssi is within expected range. |
| |
| Args: |
| actual_rssi: the rssi value to test. |
| expected_rssi: expected rssi value. |
| max_error: max error. |
| |
| Returns: |
| if the difference between actual_rssi and expected_rssi is within |
| max_error, return True. Otherwise False. |
| """ |
| if abs(actual_rssi - expected_rssi) > max_error: |
| self.log.error( |
| "Expected RSSI: {}, max error: {}, reported RSSI: {}".format( |
| expected_rssi, max_error, actual_rssi)) |
| return False |
| else: |
| return True |
| |
| def _verify_cell_info(self, |
| ad, |
| expected_cell_info_stats, |
| number_of_sample=10, |
| delay_each_sample=5): |
| """Return if reported cell info from ad matches expected_cell_info_stats |
| or not. |
| |
| Args: |
| ad: android device object. |
| expected_cell_info_stats: expected cell info list. |
| number_of_sample: number of sample to take from DUT. |
| delay_each_sample: time delay between each sample. |
| |
| Returns: |
| True if reported cell info matches with expected_cell_info_stats. |
| False otherwise. |
| |
| """ |
| |
| cell_info_stats = {} |
| |
| for index in range(number_of_sample): |
| info_list = ad.droid.telephonyGetAllCellInfo() |
| |
| self.log.info("Received Cell Info List: {}".format(info_list)) |
| |
| for sample in info_list: |
| rssi = self._get_rssi_from_cell_info(sample) |
| unique_id = self._unique_cell_id(sample) |
| |
| # check cell logic |
| if not unique_id in expected_cell_info_stats: |
| self.log.error("Found unexpected cell!") |
| return False |
| elif not self._is_matching_cell( |
| expected_cell_info_stats[unique_id], sample): |
| self.log.error("Mismatched Cell Info") |
| return False |
| |
| # Check RSSI within expected range |
| if not self._is_rssi_in_expected_range( |
| self._get_rssi_from_cell_info(sample), |
| expected_cell_info_stats[unique_id][self.TARGET_RSSI], |
| expected_cell_info_stats[unique_id][ |
| self.MAX_ERROR_RSSI]): |
| self.log.error("Cell Info: {}. Cell RSSI not" + |
| " in expected range".format(sample)) |
| return False |
| if unique_id not in cell_info_stats: |
| cell_info_stats[unique_id] = {self.RSSI: 0, self.COUNT: 0} |
| cell_info_stats[unique_id][self.RSSI] += rssi |
| cell_info_stats[unique_id][self.COUNT] += 1 |
| |
| time.sleep(delay_each_sample) |
| |
| try: |
| for unique_id in expected_cell_info_stats.keys(): |
| expected_cell_info = expected_cell_info_stats[unique_id] |
| |
| expected_number_of_sample_reported = math.floor( |
| expected_cell_info[self.REPORT_RATE] * number_of_sample) |
| |
| if cell_info_stats[unique_id][ |
| self.COUNT] < expected_number_of_sample_reported: |
| self.log.error( |
| "Insufficient reports {}/{} for {}, expected: {}", |
| expected_cell_info[unique_id][self.COUNT], |
| number_of_sample, expected_cell_info, |
| expected_number_of_sample_reported) |
| return False |
| |
| average_rssi = cell_info_stats[unique_id][self.RSSI] / \ |
| cell_info_stats[unique_id][self.COUNT] |
| |
| # Check Average RSSI within expected range |
| if not self._is_rssi_in_expected_range( |
| average_rssi, expected_cell_info[self.TARGET_RSSI], |
| expected_cell_info[self.MAX_ERROR_AVERAGE_RSSI]): |
| self.log.error("Cell Average RSSI not in expected range.") |
| return False |
| except KeyError as unique_id: |
| self.log.error("Failed to find key {}".format(unique_id)) |
| self.log.error("Expected cell info not reported {}.".format( |
| expected_cell_info)) |
| return False |
| |
| return True |
| |
| def lte_intra_freq_ncell(self, |
| ad, |
| pcid_list, |
| init_pwr, |
| power_seq, |
| interval=3, |
| err_margin=1): |
| """Return True if UE measured RSSI follows the powers in BTS simulator |
| |
| Args: |
| ad: android device object. |
| pcid: list of PCID of LTE BTS |
| init_pwr: initial downlinl power in dBm for serving and neighbor cell |
| power_seq: power change sequence in dB. |
| interval: time delay in seocnd between each power change. |
| error_margin: error margin in dB to determine measurement pass or fail |
| |
| Returns: |
| True if all measurments are within margin. |
| False otherwise. |
| |
| """ |
| bts = set_system_model_lte_lte(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| |
| self._setup_lte_serving_cell(bts[0], init_pwr, pcid_list[0], |
| pcid_list[0]) |
| self._setup_lte_neighbhor_cell_md8475a(bts[1], LTE_BAND_2, init_pwr, |
| pcid_list[1], pcid_list[1]) |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.send_command("IMSSTARTVN 1") |
| self.md8475a.start_simulation() |
| bts[1].service_state = BtsServiceState.SERVICE_STATE_OUT |
| self.ad.droid.telephonyToggleDataConnection(True) |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(1) |
| bts[1].service_state = BtsServiceState.SERVICE_STATE_IN |
| |
| n_bts = len(pcid_list) # number of total BTS |
| if n_bts >= 3: |
| self.setup_3710a_waveform("1", "A", "1960MHZ", init_pwr, "LTE", |
| "10M_B1_CID2") |
| self.turn_on_3710a_sg(1) |
| if n_bts == 4: |
| self.setup_3710a_waveform("1", "B", "1960MHZ", init_pwr, "LTE", |
| "10M_B1_CID3") |
| self.log.info("Wait for {} seconds to settle".format( |
| self._ANRITSU_SETTLING_TIME)) |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| cell_list = ad.droid.telephonyGetAllCellInfo() |
| self.log.info("Received Cell Info List: {}".format(cell_list)) |
| init_rsrp_list = [] |
| for pcid in pcid_list: |
| for cell in cell_list: |
| if cell['pcid'] == pcid: |
| init_rsrp_list.append(cell['rsrp']) |
| break |
| self.log.info("init_rsrp_list = {}".format(init_rsrp_list)) |
| error_seq = [] |
| for power in power_seq: |
| self.log.info("power = {}".format(power)) |
| for i in range(2): |
| bts[i].output_level = init_pwr + power[i] |
| if n_bts >= 3: |
| self.mg3710a.set_arb_level_aorb("A", init_pwr + power[2], "1") |
| if n_bts == 4: |
| self.mg3710a.set_arb_level_aorb("B", init_pwr + power[2], "1") |
| time.sleep(interval) |
| cell_list = ad.droid.telephonyGetAllCellInfo() |
| delta = [] |
| error = [] |
| for pcid, init_rsrp, pwr in zip(pcid_list, init_rsrp_list, power): |
| found = False |
| for cell in cell_list: |
| if cell['pcid'] == pcid: |
| found = True |
| self.log.info("pcid {}, rsrp = {}".format(pcid, cell[ |
| 'rsrp'])) |
| delta.append(cell['rsrp'] - init_rsrp) |
| error.append(cell['rsrp'] - init_rsrp - pwr) |
| if not found: |
| self.log.info("pcid {} not found!".format(pcid)) |
| delta.append(-99) |
| error.append(-99) |
| self.log.info("delta = {}".format(delta)) |
| self.log.info("error = {}".format(error)) |
| error_seq.append(error) |
| self.log.info("error_seq = {}".format(error_seq)) |
| for error in error_seq: |
| for err in error: |
| if err != -99 and abs(err) > err_margin: |
| self.log.error( |
| "Test failed! Measured power error is greater than margin." |
| ) |
| return False |
| return True |
| |
| """ Tests Begin """ |
| |
| @test_tracker_info(uuid="17a42861-abb5-480b-9139-89219fa304b2") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_2lte_intra_freq_ncell_away_close(self): |
| """ Test phone moving away from Neighbor Intra Freq cell then |
| close back while serving cell stays the same power |
| |
| Setup a two LTE cell configuration on MD8475A |
| Make Sure Phone is in LTE mode |
| Verify the reported RSSI follows the DL power change in MD8475A |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| pcid = [0, 1] |
| init_pwr = -30 # initial DL power for all cells |
| power_seq = [ |
| [0, -1], # power change sequence reference to init_pwr |
| [0, -2], |
| [0, -3], |
| [0, -4], |
| [0, -3], |
| [0, -2], |
| [0, -1], |
| [0, 0], |
| [0, 1], |
| [0, 3], |
| [0, 4], |
| [0, 5], |
| [0, 6], |
| [0, 7], |
| [0, 8], |
| [0, 9], |
| [0, 10], |
| [0, 9], |
| [0, 8], |
| [0, 7], |
| [0, 6], |
| [0, 5], |
| [0, 4], |
| [0, 3], |
| [0, 2], |
| [0, 1], |
| [0, 0] |
| ] |
| |
| return self.lte_intra_freq_ncell(self.ad, pcid, init_pwr, power_seq) |
| |
| @test_tracker_info(uuid="117f404b-fb78-474a-86ba-209e6a54c9a8") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_2lte_intra_freq_scell_away_close(self): |
| """ Test phone moving away from serving cell then close back while |
| neighbor Intra Freq cell stays the same power |
| |
| Setup a two LTE cell configuration on MD8475A |
| Make Sure Phone is in LTE mode |
| Verify the reported RSSI follows the DL power change in MD8475A |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| pcid = [0, 1] |
| init_pwr = -30 # initial DL power for all cells |
| power_seq = [ |
| [-1, 0], # power change sequence reference to init_pwr |
| [-2, 0], |
| [-3, 0], |
| [-4, 0], |
| [-5, 0], |
| [-6, 0], |
| [-7, 0], |
| [-8, 0], |
| [-9, 0], |
| [-10, 0], |
| [-9, 0], |
| [-8, 0], |
| [-7, 0], |
| [-6, 0], |
| [-5, 0], |
| [-4, 0], |
| [-3, 0], |
| [-2, 0], |
| [-1, 0], |
| [0, 0], |
| [1, 0], |
| [2, 0], |
| [3, 0], |
| [4, 0], |
| [3, 0], |
| [2, 0], |
| [1, 0], |
| [0, 0] |
| ] |
| |
| return self.lte_intra_freq_ncell(self.ad, pcid, init_pwr, power_seq) |
| |
| @test_tracker_info(uuid="d1eec95f-40e9-4099-a669-9a88e56049ca") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_2lte_intra_freq_ncell_away_close_2(self): |
| """ Test phone moving away from serving cell and close to neighbor |
| Intra Freq cell, then back and forth |
| |
| Setup a two LTE cell configuration on MD8475A |
| Make Sure Phone is in LTE mode |
| Verify the reported RSSI follows the DL power change in MD8475A |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| pcid = [0, 1] |
| init_pwr = -30 # initial DL power for all cells |
| power_seq = [ |
| [-1, 1], # power change sequence reference to init_pwr |
| [-2, 2], |
| [-3, 3], |
| [-4, 4], |
| [-5, 5], |
| [-4, 4], |
| [-3, 3], |
| [-2, 2], |
| [-1, 1], |
| [-0, 0], |
| [1, -1], |
| [2, -2], |
| [1, -1], |
| [0, 0] |
| ] |
| |
| return self.lte_intra_freq_ncell(self.ad, pcid, init_pwr, power_seq) |
| |
| @test_tracker_info(uuid="c642a85b-4970-429c-81c4-f635392879be") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_2lte_intra_freq_2cell_synced(self): |
| """ Test phone moving away and back to both serving cell and neighbor |
| Intra Freq cell |
| |
| Setup a two LTE cell configuration on MD8475A |
| Make Sure Phone is in LTE mode |
| Verify the reported RSSI follows the DL power change in MD8475A and MG3710A |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| pcid = [0, 1] |
| init_pwr = -30 # initial DL power for all cells |
| power_seq = [ |
| [-1, -1], # power change sequence reference to init_pwr |
| [-3, -3], |
| [-5, -5], |
| [-7, -7], |
| [-5, -5], |
| [-3, -3], |
| [-1, -1], |
| [1, 1], |
| [3, 3], |
| [5, 5], |
| [7, 7], |
| [3, 3], |
| [0, 0] |
| ] |
| |
| return self.lte_intra_freq_ncell(self.ad, pcid, init_pwr, power_seq) |
| |
| @test_tracker_info(uuid="9144fab6-c7e1-4de2-a01d-7a15c117ec70") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_3lte_intra_freq_scell_reversed(self): |
| """ Test phone moving away and back between 2 neighbor cells while maintain |
| same rssi with serving cell |
| |
| Setup a two LTE cell configuration on MD8475A |
| Make Sure Phone is in LTE mode |
| Verify the reported RSSI follows the DL power change in MD8475A and MG3710A |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| pcid = [0, 1, 2] |
| init_pwr = -30 # initial DL power for all cells |
| power_seq = [ |
| [0, 1, -1], # power change sequence reference to init_pwr |
| [0, 2, -2], |
| [0, 3, -3], |
| [0, 4, -4], |
| [0, 3, -3], |
| [0, 2, -2], |
| [0, 1, -1], |
| [0, 0, 0], |
| [0, -1, 1], |
| [0, -2, 2], |
| [0, -3, 3], |
| [0, -4, 4], |
| [0, -3, 3], |
| [0, -2, 2], |
| [0, -1, 1], |
| [0, 0, 0] |
| ] |
| |
| return self.lte_intra_freq_ncell(self.ad, pcid, init_pwr, power_seq) |
| |
| @test_tracker_info(uuid="7bfbea72-e6fa-45ae-bf7e-b9b42063abe7") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_3lte_intra_freq_3cell_synced(self): |
| """ Test phone moving away and back to both serving cell and neighbor |
| Intra Freq cell |
| |
| Setup a two LTE cell configuration on MD8475A |
| Make Sure Phone is in LTE mode |
| Verify the reported RSSI follows the DL power change in MD8475A |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| pcid = [0, 1, 2] |
| init_pwr = -30 # initial DL power for all cells |
| power_seq = [ |
| [-1, -1, -1], # power change sequence reference to init_pwr |
| [-3, -3, -3], |
| [-5, -5, -5], |
| [-7, -7, -7], |
| [-5, -5, -5], |
| [-3, -3, -3], |
| [-1, -1, -1], |
| [1, 1, 1], |
| [3, 3, 3], |
| [5, 5, 5], |
| [7, 7, 7], |
| [3, 3, 3], |
| [0, 0, 0] |
| ] |
| |
| return self.lte_intra_freq_ncell(self.ad, pcid, init_pwr, power_seq) |
| |
| @test_tracker_info(uuid="b4577ae1-6435-4a15-9449-e02013dfb032") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_ncells_intra_lte_0_cells(self): |
| """ Test Number of neighbor cells reported by Phone when no neighbor |
| cells are present (Phone camped on LTE) |
| |
| Setup a single LTE cell configuration on MD8475A |
| Make Sure Phone is in LTE mode |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell_cid = 11 |
| serving_cell_pcid = 11 |
| serving_cell_dlpower = -20 |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell_cid, |
| self.PCID: serving_cell_pcid, |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: self._LTE_RSSI_OFFSET + serving_cell_dlpower, |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| [bts1] = set_system_model_lte(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_lte_serving_cell(bts1, serving_cell_dlpower, |
| serving_cell_cid, serving_cell_pcid) |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="fe2cc07b-9676-41ab-b7ff-112d3ef84980") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_ncells_intra_lte_1_cells(self): |
| """ Test Number of neighbor cells reported by Phone when one neighbor |
| cell is present (Phone camped on LTE) |
| |
| Setup a two LTE cell configuration on MD8475A |
| Make Sure Phone is in LTE mode |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell_cid = 11 |
| serving_cell_pcid = 11 |
| neigh_cell_cid = 22 |
| neigh_cell_pcid = 22 |
| serving_cell_dlpower = -20 |
| neigh_cell_dlpower = -24 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell_cid, |
| self.PCID: serving_cell_pcid, |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: self._LTE_RSSI_OFFSET + serving_cell_dlpower, |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PCID: neigh_cell_pcid, |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_dlpower, |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| [bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| |
| self._setup_lte_serving_cell(bts1, serving_cell_dlpower, |
| serving_cell_cid, serving_cell_pcid) |
| self._setup_lte_neighbhor_cell_md8475a(bts2, LTE_BAND_2, |
| neigh_cell_dlpower, |
| neigh_cell_cid, neigh_cell_pcid) |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.send_command("IMSSTARTVN 1") |
| self.md8475a.start_simulation() |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| bts2.service_state = BtsServiceState.SERVICE_STATE_IN |
| self.log.info("Wait for {} seconds to settle".format( |
| self._SETTLING_TIME)) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="8abc7903-4ea7-407a-946b-455d7f767c3e") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_ncells_intra_lte_2_cells(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells are present (Phone camped on LTE) |
| |
| Setup a two LTE cell configuration on MD8475A |
| Setup one waveform on MG3710A |
| Make Sure Phone is in LTE mode |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell_cid = 11 |
| serving_cell_pcid = 11 |
| neigh_cell_1_cid = 22 |
| neigh_cell_1_pcid = 22 |
| neigh_cell_2_cid = 1 |
| neigh_cell_2_pcid = 1 |
| serving_cell_dlpower = -20 |
| neigh_cell_1_dlpower = -24 |
| neigh_cell_2_dlpower = -23 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell_cid, |
| self.PCID: serving_cell_pcid, |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: self._LTE_RSSI_OFFSET + serving_cell_dlpower, |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PCID: neigh_cell_1_pcid, |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_1_dlpower, |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PCID: neigh_cell_2_pcid, |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_2_dlpower, |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| [bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| |
| self._setup_lte_serving_cell(bts1, serving_cell_dlpower, |
| serving_cell_cid, serving_cell_pcid) |
| self._setup_lte_neighbhor_cell_md8475a( |
| bts2, LTE_BAND_2, neigh_cell_1_dlpower, neigh_cell_1_cid, |
| neigh_cell_1_pcid) |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| |
| self.setup_3710a_waveform("1", "A", "1960MHZ", neigh_cell_2_dlpower, |
| "LTE", "10M_B1_CID1") |
| self.turn_on_3710a_sg(1) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="623b3d16-bc48-4353-abc3-054ca6351a97") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_ncells_intra_lte_3_cells(self): |
| """ Test Number of neighbor cells reported by Phone when three neighbor |
| cells are present (Phone camped on LTE) |
| |
| Setup two LTE cell configuration on MD8475A |
| Setup two waveform on MG3710A |
| Make Sure Phone is in LTE mode |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell_cid = 11 |
| serving_cell_pcid = 11 |
| neigh_cell_1_cid = 1 |
| neigh_cell_1_pcid = 1 |
| neigh_cell_2_cid = 2 |
| neigh_cell_2_pcid = 2 |
| neigh_cell_3_cid = 3 |
| neigh_cell_3_pcid = 3 |
| serving_cell_dlpower = -20 |
| neigh_cell_1_dlpower = -24 |
| neigh_cell_2_dlpower = -22 |
| neigh_cell_3_dlpower = -23 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell_cid, |
| self.PCID: serving_cell_pcid, |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: self._LTE_RSSI_OFFSET + serving_cell_dlpower, |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PCID: neigh_cell_1_pcid, |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_1_dlpower, |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PCID: neigh_cell_2_pcid, |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_2_dlpower, |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PCID: neigh_cell_3_pcid, |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_3_dlpower, |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| [bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_lte_serving_cell(bts1, serving_cell_dlpower, |
| serving_cell_cid, serving_cell_pcid) |
| |
| self._setup_lte_neighbhor_cell_md8475a( |
| bts2, LTE_BAND_2, neigh_cell_1_dlpower, neigh_cell_1_cid, |
| neigh_cell_1_pcid) |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| |
| self.setup_3710a_waveform("1", "A", "1960MHZ", neigh_cell_2_dlpower, |
| "LTE", "10M_B1_CID2") |
| |
| self.setup_3710a_waveform("1", "B", "1960MHZ", neigh_cell_3_dlpower, |
| "LTE", "10M_B1_CID3") |
| self.turn_on_3710a_sg(1) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="3e094e3d-e7b7-447a-9a7a-8060c5b17e88") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_ncells_intra_lte_4_cells(self): |
| """ Test Number of neighbor cells reported by Phone when four neighbor |
| cells are present (Phone camped on LTE) |
| |
| Setup two LTE cell configuration on MD8475A |
| Setup three waveform on MG3710A |
| Make Sure Phone is in LTE mode |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell_cid = 11 |
| serving_cell_pcid = 11 |
| neigh_cell_1_cid = 1 |
| neigh_cell_1_pcid = 1 |
| neigh_cell_2_cid = 2 |
| neigh_cell_2_pcid = 2 |
| neigh_cell_3_cid = 3 |
| neigh_cell_3_pcid = 3 |
| neigh_cell_4_cid = 5 |
| neigh_cell_4_pcid = 5 |
| serving_cell_dlpower = -20 |
| neigh_cell_1_dlpower = -24 |
| neigh_cell_2_dlpower = -22 |
| neigh_cell_3_dlpower = -24 |
| neigh_cell_4_dlpower = -22 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell_cid, |
| self.PCID: serving_cell_pcid, |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: self._LTE_RSSI_OFFSET + serving_cell_dlpower, |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PCID: neigh_cell_1_pcid, |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_1_dlpower, |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PCID: neigh_cell_2_pcid, |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_2_dlpower, |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PCID: neigh_cell_3_pcid, |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_3_dlpower, |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PCID: neigh_cell_4_pcid, |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_4_dlpower, |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| [bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_lte_serving_cell(bts1, serving_cell_dlpower, |
| serving_cell_cid, serving_cell_pcid) |
| |
| self._setup_lte_neighbhor_cell_md8475a( |
| bts2, LTE_BAND_2, neigh_cell_1_dlpower, neigh_cell_1_cid, |
| neigh_cell_1_pcid) |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| |
| self.setup_3710a_waveform("1", "A", "1960MHZ", neigh_cell_2_dlpower, |
| "LTE", "10M_B1_CID2") |
| |
| self.setup_3710a_waveform("1", "B", "1960MHZ", neigh_cell_3_dlpower, |
| "LTE", "10M_B1_CID3") |
| |
| self.setup_3710a_waveform("2", "A", "1960MHZ", neigh_cell_4_dlpower, |
| "LTE", "10M_B1_CID5") |
| self.turn_on_3710a_sg(1) |
| self.turn_on_3710a_sg(2) |
| time.sleep(self._SETTLING_TIME) |
| |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="7e9a9c30-9284-4440-b85e-f94b83e0373f") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_lte_intrafreq_0_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when no neighbor |
| cells are present (Phone camped on LTE) |
| |
| Setup a single LTE cell configuration on MD8475A |
| Make Sure Phone is in LTE mode |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = lte_band4_ch2000_fr2115_pcid1_cell |
| serving_cell['power'] = -20 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PCID: serving_cell[self.PCID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| [bts1] = set_system_model_lte(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="13bd7000-5a45-43f5-9e54-001e0aa09262") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_lte_intrafreq_1_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when one neighbor |
| cell is present (Phone camped on LTE) |
| |
| Setup a two LTE cell configuration on MD8475A |
| Make Sure Phone is in LTE mode |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = lte_band4_ch2000_fr2115_pcid1_cell |
| neighbor_cell = lte_band4_ch2000_fr2115_pcid2_cell |
| serving_cell['power'] = -20 |
| neighbor_cell['power'] = -24 |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PCID: serving_cell[self.PCID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PCID: neighbor_cell[self.PCID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + neighbor_cell['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| self._setup_lte_cell_md8475a(bts2, neighbor_cell, |
| neighbor_cell['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("LTE", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("LTE", 1, "LTE_4_C2000_F2115_PCID2") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| # To make sure phone camps on BTS1 |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| bts2.service_state = BtsServiceState.SERVICE_STATE_IN |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="5dca3a16-73a0-448a-a35d-22ebd253a570") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_lte_intrafreq_2_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells are present (Phone camped on LTE) |
| |
| Setup one LTE cell configuration on MD8475A |
| Setup two waveform on MG3710A |
| Make Sure Phone is in LTE mode |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = lte_band4_ch2000_fr2115_pcid1_cell |
| neighbor_cell_1 = lte_band4_ch2000_fr2115_pcid2_cell |
| neighbor_cell_2 = lte_band4_ch2000_fr2115_pcid3_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -24 |
| neighbor_cell_2['power'] = -23 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PCID: serving_cell[self.PCID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PCID: neighbor_cell_1[self.PCID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PCID: neighbor_cell_2[self.PCID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| self._setup_lte_cell_md8475a(bts2, neighbor_cell_1, |
| neighbor_cell_1['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("LTE", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("LTE", 1, "LTE_4_C2000_F2115_PCID2") |
| bts1.set_neighbor_cell_type("LTE", 2, "CELLNAME") |
| bts1.set_neighbor_cell_name("LTE", 2, "LTE_4_C2000_F2115_PCID3") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| # To make sure phone camps on BTS1 |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| bts2.service_state = BtsServiceState.SERVICE_STATE_IN |
| self.setup_3710a_waveform("1", "A", "2115MHz", |
| neighbor_cell_2['power'], "LTE", |
| "lte_4_ch2000_pcid3") |
| self.turn_on_3710a_sg(1) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="860152de-8aa0-422e-b5b0-28bf244076f4") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_lte_intrafreq_3_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when three neighbor |
| cells are present (Phone camped on LTE) |
| |
| Setup a one LTE cell configuration on MD8475A |
| Setup three waveforms on MG3710A |
| Make Sure Phone is in LTE mode |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = lte_band4_ch2000_fr2115_pcid1_cell |
| neighbor_cell_1 = lte_band4_ch2000_fr2115_pcid2_cell |
| neighbor_cell_2 = lte_band4_ch2000_fr2115_pcid3_cell |
| neighbor_cell_3 = lte_band4_ch2000_fr2115_pcid4_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -24 |
| neighbor_cell_2['power'] = -23 |
| neighbor_cell_3['power'] = -22 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PCID: serving_cell[self.PCID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PCID: neighbor_cell_1[self.PCID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PCID: neighbor_cell_2[self.PCID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PCID: neighbor_cell_3[self.PCID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + neighbor_cell_3['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| self._setup_lte_cell_md8475a(bts2, neighbor_cell_1, |
| neighbor_cell_1['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("LTE", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("LTE", 1, "LTE_4_C2000_F2115_PCID2") |
| bts1.set_neighbor_cell_type("LTE", 2, "CELLNAME") |
| bts1.set_neighbor_cell_name("LTE", 2, "LTE_4_C2000_F2115_PCID3") |
| bts1.set_neighbor_cell_type("LTE", 3, "CELLNAME") |
| bts1.set_neighbor_cell_name("LTE", 3, "LTE_4_C2000_F2115_PCID4") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| # To make sure phone camps on BTS1 |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| bts2.service_state = BtsServiceState.SERVICE_STATE_IN |
| self.setup_3710a_waveform("1", "A", "2115MHz", |
| neighbor_cell_2['power'], "LTE", |
| "lte_4_ch2000_pcid3") |
| |
| self.setup_3710a_waveform("1", "B", "2115MHz", |
| neighbor_cell_3['power'], "LTE", |
| "lte_4_ch2000_pcid4") |
| self.turn_on_3710a_sg(1) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="8c5b63ba-1322-47b6-adce-5224cbc0995a") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_lte_interfreq_1_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells(inter frequency) are present (Phone camped on LTE) |
| |
| Setup a a LTE cell configuration on MD8475A |
| Setup two LTE waveforms(inter frequency) on MG3710A |
| Make Sure Phone is in LTE mode |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = lte_band4_ch2000_fr2115_pcid1_cell |
| neighbor_cell_1 = lte_band4_ch2050_fr2120_pcid7_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -23 |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PCID: serving_cell[self.PCID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PCID: neighbor_cell_1[self.PCID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| self._setup_lte_cell_md8475a(bts2, neighbor_cell_1, |
| neighbor_cell_1['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("LTE", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("LTE", 1, "LTE_4_C2050_F2120_PCID7") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| # To make sure phone camps on BTS1 |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| self.ad.droid.telephonyToggleDataConnection(False) |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| bts2.service_state = BtsServiceState.SERVICE_STATE_IN |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| self.md8475a.set_packet_preservation() |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="97853501-a328-4706-bb3f-c5e708b1ccb8") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_lte_interfreq_2_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells(inter frequency) are present (Phone camped on LTE) |
| |
| Setup a a LTE cell configuration on MD8475A |
| Setup two LTE waveforms(inter frequency) on MG3710A |
| Make Sure Phone is in LTE mode |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = lte_band4_ch2000_fr2115_pcid1_cell |
| neighbor_cell_1 = lte_band4_ch2050_fr2120_pcid7_cell |
| neighbor_cell_2 = lte_band4_ch2250_fr2140_pcid8_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -23 |
| neighbor_cell_2['power'] = -22 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PCID: serving_cell[self.PCID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PCID: neighbor_cell_1[self.PCID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PCID: neighbor_cell_2[self.PCID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| self._setup_lte_cell_md8475a(bts2, neighbor_cell_1, |
| neighbor_cell_1['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("LTE", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("LTE", 1, "LTE_4_C2050_F2120_PCID7") |
| bts1.set_neighbor_cell_type("LTE", 2, "CELLNAME") |
| bts1.set_neighbor_cell_name("LTE", 2, "LTE_4_C2250_F2140_PCID8") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| # To make sure phone camps on BTS1 |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| self.ad.droid.telephonyToggleDataConnection(False) |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| bts2.service_state = BtsServiceState.SERVICE_STATE_IN |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| self.setup_3710a_waveform("1", "A", "2140MHz", |
| neighbor_cell_2['power'], "LTE", |
| "lte_4_ch2250_pcid8") |
| |
| self.turn_on_3710a_sg(1) |
| self.md8475a.set_packet_preservation() |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="74bd528c-e1c5-476d-9ee0-ebfc7bbc5de1") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_lte_interband_2_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells(inter band) are present (Phone camped on LTE) |
| |
| Setup one LTE cell configuration on MD8475A |
| Setup two LTE waveforms((inter band)) on MG3710A |
| Make Sure Phone is in LTE mode |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = lte_band4_ch2000_fr2115_pcid1_cell |
| neighbor_cell_1 = lte_band2_ch900_fr1960_pcid9_cell |
| neighbor_cell_2 = lte_band12_ch5095_fr737_pcid10_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -24 |
| neighbor_cell_2['power'] = -22 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PCID: serving_cell[self.PCID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PCID: neighbor_cell_1[self.PCID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PCID: neighbor_cell_2[self.PCID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| self._setup_lte_cell_md8475a(bts2, neighbor_cell_1, |
| neighbor_cell_1['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("LTE", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("LTE", 1, "LTE_2_C900_F1960_PCID9") |
| bts1.set_neighbor_cell_type("LTE", 2, "CELLNAME") |
| bts1.set_neighbor_cell_name("LTE", 2, "LTE_12_C5095_F737_PCID10") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| # To make sure phone camps on BTS1 |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| self.ad.droid.telephonyToggleDataConnection(False) |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| bts2.service_state = BtsServiceState.SERVICE_STATE_IN |
| self.setup_3710a_waveform("1", "A", "737.5MHz", |
| neighbor_cell_2['power'], "LTE", |
| "lte_12_ch5095_pcid10") |
| self.turn_on_3710a_sg(1) |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| self.md8475a.set_packet_preservation() |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="6289e3e4-9316-4b82-bd0b-dde53f26da0d") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_lte_interrat_1_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells(inter RAT) are present (Phone camped on LTE) |
| |
| Setup one LTE and one WCDMA cell configuration on MD8475A |
| Setup one GSM waveform on MG3710A |
| Make Sure Phone is in LTE mode |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = lte_band4_ch2000_fr2115_pcid1_cell |
| neighbor_cell_1 = wcdma_band1_ch10700_fr2140_cid31_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -24 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PCID: serving_cell[self.PCID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PSC: neighbor_cell_1[self.PSC], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_lte_wcdma( |
| self.md8475a, self.user_params, self.ad.sim_card) |
| self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| self._setup_wcdma_cell_md8475a(bts2, neighbor_cell_1, |
| neighbor_cell_1['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("WCDMA", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("WCDMA", 1, "WCDM_1_C10700_F2140_CID31") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| # To make sure phone camps on BTS1 |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| self.ad.droid.telephonyToggleDataConnection(False) |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| self.md8475a.set_packet_preservation() |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="9be4e4a8-f79a-4283-9a85-371a9bddfa5d") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_lte_interrat_2_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells(inter RAT) are present (Phone camped on LTE) |
| |
| Setup one LTE and one WCDMA cell configuration on MD8475A |
| Setup one GSM waveform on MG3710A |
| Make Sure Phone is in LTE mode |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = lte_band4_ch2000_fr2115_pcid1_cell |
| neighbor_cell_1 = wcdma_band1_ch10700_fr2140_cid31_cell |
| neighbor_cell_2 = gsm_band1900_ch512_fr1930_cid51_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -24 |
| neighbor_cell_2['power'] = -22 |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PCID: serving_cell[self.PCID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PSC: neighbor_cell_1[self.PSC], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.CID: neighbor_cell_2[self.CID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_lte_wcdma( |
| self.md8475a, self.user_params, self.ad.sim_card) |
| self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| self._setup_wcdma_cell_md8475a(bts2, neighbor_cell_1, |
| neighbor_cell_1['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("WCDMA", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("WCDMA", 1, "WCDM_1_C10700_F2140_CID31") |
| bts1.set_neighbor_cell_type("GSM", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("GSM", 1, "GSM_1900_C512_F1930_CID51") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| # To make sure phone camps on BTS1 |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| self.ad.droid.telephonyToggleDataConnection(False) |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_LTE_GSM_WCDMA, |
| RAT_FAMILY_LTE, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| bts2.service_state = BtsServiceState.SERVICE_STATE_IN |
| self.setup_3710a_waveform("1", "A", "1930.2MHz", |
| neighbor_cell_2['power'], "GSM", |
| "gsm_lac51_cid51") |
| self.turn_on_3710a_sg(1) |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| self.md8475a.set_packet_preservation() |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="14db7a3d-b18b-4b87-9d84-fb0c00d3971e") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_wcdma_intrafreq_0_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when no neighbor |
| cells are present (Phone camped on WCDMA) |
| |
| Setup a single WCDMA cell configuration on MD8475A |
| Make Sure Phone camped on WCDMA |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell |
| serving_cell['power'] = -20 |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PSC: serving_cell[self.PSC], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| [bts1] = set_system_model_wcdma(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_wcdma_cell_md8475a(bts1, serving_cell, |
| serving_cell['power']) |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_UMTS, |
| RAT_FAMILY_UMTS, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_UMTS, NETWORK_MODE_GSM_UMTS)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="1a227d1e-9991-4646-b51a-8156f24485da") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_wcdma_intrafreq_1_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when one neighbor |
| cells is present (Phone camped on WCDMA) |
| |
| Setup two WCDMA cell configuration on MD8475A |
| Make Sure Phone camped on WCDMA |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell |
| neighbor_cell = wcdma_band1_ch10700_fr2140_cid34_cell |
| serving_cell['power'] = -20 |
| neighbor_cell['power'] = -24 |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PSC: serving_cell[self.PSC], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PSC: neighbor_cell[self.PSC], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + neighbor_cell['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_wcdma_wcdma( |
| self.md8475a, self.user_params, self.ad.sim_card) |
| self._setup_wcdma_cell_md8475a(bts1, serving_cell, |
| serving_cell['power']) |
| self._setup_wcdma_cell_md8475a(bts2, neighbor_cell, |
| neighbor_cell['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("WCDMA", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("WCDMA", 1, "WCDM_1_C10700_F2140_CID34") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| # To make sure phone camps on BTS1 |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_UMTS, |
| RAT_FAMILY_UMTS, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_UMTS, NETWORK_MODE_GSM_UMTS)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| bts2.service_state = BtsServiceState.SERVICE_STATE_IN |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="170689a0-0db1-4a14-8b87-5a1b6c9b8581") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_wcdma_intrafreq_2_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells are present (Phone camped on WCDMA) |
| |
| Setup two WCDMA cell configuration on MD8475A |
| Setup one WCDMA waveform on MG3710A |
| Make Sure Phone camped on WCDMA |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell |
| neighbor_cell_1 = wcdma_band1_ch10700_fr2140_cid32_cell |
| neighbor_cell_2 = wcdma_band1_ch10700_fr2140_cid33_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -24 |
| neighbor_cell_2['power'] = -22 |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PSC: serving_cell[self.PSC], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PSC: neighbor_cell_1[self.PSC], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PSC: neighbor_cell_2[self.PSC], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_wcdma_wcdma( |
| self.md8475a, self.user_params, self.ad.sim_card) |
| self._setup_wcdma_cell_md8475a(bts1, serving_cell, |
| serving_cell['power']) |
| self._setup_wcdma_cell_md8475a(bts2, neighbor_cell_1, |
| neighbor_cell_1['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("WCDMA", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("WCDMA", 1, "WCDM_1_C10700_F2140_CID32") |
| bts1.set_neighbor_cell_type("WCDMA", 2, "CELLNAME") |
| bts1.set_neighbor_cell_name("WCDMA", 2, "WCDM_1_C10700_F2140_CID33") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| # To make sure phone camps on BTS1 |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_UMTS, |
| RAT_FAMILY_UMTS, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_UMTS, NETWORK_MODE_GSM_UMTS)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| bts2.service_state = BtsServiceState.SERVICE_STATE_IN |
| self.setup_3710a_waveform("1", "A", "2140MHz", |
| neighbor_cell_2['power'], "WCDMA", |
| "wcdma_1_psc33_cid33") |
| self.turn_on_3710a_sg(1) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="3ec77512-4d5b-40c9-b733-cf358f999e15") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_wcdma_intrafreq_3_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when three neighbor |
| cells are present (Phone camped on WCDMA) |
| |
| Setup two WCDMA cell configuration on MD8475A |
| Setup two WCDMA waveform on MG3710A |
| Make Sure Phone camped on WCDMA |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell |
| neighbor_cell_1 = wcdma_band1_ch10700_fr2140_cid32_cell |
| neighbor_cell_2 = wcdma_band1_ch10700_fr2140_cid33_cell |
| neighbor_cell_3 = wcdma_band1_ch10700_fr2140_cid34_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -24 |
| neighbor_cell_2['power'] = -23 |
| neighbor_cell_3['power'] = -22 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PSC: serving_cell[self.PSC], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PSC: neighbor_cell_1[self.PSC], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PSC: neighbor_cell_2[self.PSC], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PSC: neighbor_cell_3[self.PSC], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + neighbor_cell_3['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_wcdma_wcdma( |
| self.md8475a, self.user_params, self.ad.sim_card) |
| self._setup_wcdma_cell_md8475a(bts1, serving_cell, |
| serving_cell['power']) |
| self._setup_wcdma_cell_md8475a(bts2, neighbor_cell_1, |
| neighbor_cell_1['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("WCDMA", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("WCDMA", 1, "WCDM_1_C10700_F2140_CID32") |
| bts1.set_neighbor_cell_type("WCDMA", 2, "CELLNAME") |
| bts1.set_neighbor_cell_name("WCDMA", 2, "WCDM_1_C10700_F2140_CID33") |
| bts1.set_neighbor_cell_type("WCDMA", 3, "CELLNAME") |
| bts1.set_neighbor_cell_name("WCDMA", 3, "WCDM_1_C10700_F2140_CID34") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| # To make sure phone camps on BTS1 |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_UMTS, |
| RAT_FAMILY_UMTS, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_UMTS, NETWORK_MODE_GSM_UMTS)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| bts2.service_state = BtsServiceState.SERVICE_STATE_IN |
| self.setup_3710a_waveform("1", "A", "2140MHz", |
| neighbor_cell_2['power'], "WCDMA", |
| "wcdma_1_psc33_cid33") |
| |
| self.setup_3710a_waveform("2", "A", "2140MHz", |
| neighbor_cell_3['power'], "WCDMA", |
| "wcdma_1_psc34_cid34") |
| self.turn_on_3710a_sg(1) |
| self.turn_on_3710a_sg(2) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="6f39e4a5-81da-4f47-8022-f22d82ff6f31") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_wcdma_interfreq_1_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells(inter frequency) are present (Phone camped on WCDMA) |
| |
| Setup a two WCDMA cell configuration on MD8475A |
| Setup one WCDMA waveform on MG3710A |
| Make Sure Phone camped on WCDMA |
| Verify the number of neighbor cells reported by Phonene |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell |
| neighbor_cell_1 = wcdma_band1_ch10800_fr2160_cid37_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -24 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PSC: serving_cell[self.PSC], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PSC: neighbor_cell_1[self.PSC], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_wcdma_wcdma( |
| self.md8475a, self.user_params, self.ad.sim_card) |
| self._setup_wcdma_cell_md8475a(bts1, serving_cell, |
| serving_cell['power']) |
| self._setup_wcdma_cell_md8475a(bts2, neighbor_cell_1, |
| neighbor_cell_1['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("WCDMA", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("WCDMA", 1, "WCDM_1_C10800_F2160_CID37") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| #To make sure phone camps on BTS1 |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| self.ad.droid.telephonyToggleDataConnection(False) |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_UMTS, |
| RAT_FAMILY_UMTS, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_UMTS, NETWORK_MODE_GSM_UMTS)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| bts2.service_state = BtsServiceState.SERVICE_STATE_IN |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="992d9ffb-2538-447b-b7e8-f40061063686") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_wcdma_interfreq_2_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells(inter frequency) are present (Phone camped on WCDMA) |
| |
| Setup a two WCDMA cell configuration on MD8475A |
| Setup one WCDMA waveform on MG3710A |
| Make Sure Phone camped on WCDMA |
| Verify the number of neighbor cells reported by Phonene |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell |
| neighbor_cell_1 = wcdma_band1_ch10575_fr2115_cid36_cell |
| neighbor_cell_2 = wcdma_band1_ch10800_fr2160_cid37_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -24 |
| neighbor_cell_2['power'] = -23 |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PSC: serving_cell[self.PSC], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PSC: neighbor_cell_1[self.PSC], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PSC: neighbor_cell_2[self.PSC], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_wcdma_wcdma( |
| self.md8475a, self.user_params, self.ad.sim_card) |
| self._setup_wcdma_cell_md8475a(bts1, serving_cell, |
| serving_cell['power']) |
| self._setup_wcdma_cell_md8475a(bts2, neighbor_cell_1, |
| neighbor_cell_1['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("WCDMA", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("WCDMA", 1, "WCDM_1_C10575_F2115_CID36") |
| bts1.set_neighbor_cell_type("WCDMA", 2, "CELLNAME") |
| bts1.set_neighbor_cell_name("WCDMA", 2, "WCDM_1_C10800_F2160_CID37") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| # To make sure phone camps on BTS1 |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| self.ad.droid.telephonyToggleDataConnection(False) |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_UMTS, |
| RAT_FAMILY_UMTS, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_UMTS, NETWORK_MODE_GSM_UMTS)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| bts2.service_state = BtsServiceState.SERVICE_STATE_IN |
| self.setup_3710a_waveform("1", "A", "2160MHz", |
| neighbor_cell_2['power'], "WCDMA", |
| "wcdma_1_psc37_cid37") |
| self.turn_on_3710a_sg(1) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="60cb8c15-3cb3-4ead-9e59-a8aee819e9ef") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_wcdma_interband_2_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells(inter band) are present (Phone camped on WCDMA) |
| |
| Setup a two WCDMA cell configuration on MD8475A |
| Setup one WCDMA waveform on MG3710A |
| Make Sure Phone camped on WCDMA |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell |
| neighbor_cell_1 = wcdma_band2_ch9800_fr1960_cid38_cell |
| neighbor_cell_2 = wcdma_band2_ch9900_fr1980_cid39_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -23 |
| neighbor_cell_2['power'] = -22 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PSC: serving_cell[self.PSC], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PSC: neighbor_cell_1[self.PSC], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PSC: neighbor_cell_2[self.PSC], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_wcdma_wcdma( |
| self.md8475a, self.user_params, self.ad.sim_card) |
| self._setup_wcdma_cell_md8475a(bts1, serving_cell, |
| serving_cell['power']) |
| self._setup_wcdma_cell_md8475a(bts2, neighbor_cell_1, |
| neighbor_cell_1['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("WCDMA", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("WCDMA", 1, "WCDM_2_C9800_F1960_CID38") |
| bts1.set_neighbor_cell_type("WCDMA", 2, "CELLNAME") |
| bts1.set_neighbor_cell_name("WCDMA", 2, "WCDM_2_C9900_F1980_CID39") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| # To make sure phone camps on BTS1 |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| self.ad.droid.telephonyToggleDataConnection(False) |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_UMTS, |
| RAT_FAMILY_UMTS, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_UMTS, NETWORK_MODE_GSM_UMTS)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| bts2.service_state = BtsServiceState.SERVICE_STATE_IN |
| self.setup_3710a_waveform("1", "A", "1980MHz", |
| neighbor_cell_2['power'], "WCDMA", |
| "wcdma_2_psc39_cid39") |
| self.turn_on_3710a_sg(1) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="daa29f27-f67b-47ee-9a30-1c9572eedf2f") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_wcdma_interrat_1_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells are present (Phone camped on WCDMA) |
| |
| Setup a two WCDMA cell configuration on MD8475A |
| Setup one WCDMA waveform on MG3710A |
| Make Sure Phone camped on WCDMA |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell |
| neighbor_cell_1 = gsm_band1900_ch512_fr1930_cid51_cell |
| neighbor_cell_2 = lte_band4_ch2000_fr2115_pcid1_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -23 |
| neighbor_cell_2['power'] = -22 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PSC: serving_cell[self.PSC], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.CID: neighbor_cell_1[self.CID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PCID: neighbor_cell_2[self.PCID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_lte_wcdma( |
| self.md8475a, self.user_params, self.ad.sim_card) |
| self._setup_wcdma_cell_md8475a(bts2, serving_cell, |
| serving_cell['power']) |
| self._setup_lte_cell_md8475a(bts1, neighbor_cell_2, |
| neighbor_cell_2['power']) |
| bts2.neighbor_cell_mode = "USERDATA" |
| bts2.set_neighbor_cell_type("LTE", 1, "CELLNAME") |
| bts2.set_neighbor_cell_name("LTE", 1, "LTE_4_C2000_F2115_PCID1") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| # To make sure phone camps on BTS1 |
| bts1.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| self.ad.droid.telephonyToggleDataConnection(False) |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_UMTS, |
| RAT_FAMILY_UMTS, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_UMTS, NETWORK_MODE_GSM_UMTS)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| bts1.service_state = BtsServiceState.SERVICE_STATE_IN |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="08e5d666-fae6-48a3-b03b-de7b7b3f5982") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_wcdma_interrat_2_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells are present (Phone camped on WCDMA) |
| |
| Setup a two WCDMA cell configuration on MD8475A |
| Setup one WCDMA waveform on MG3710A |
| Make Sure Phone camped on WCDMA |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell |
| neighbor_cell_1 = gsm_band1900_ch512_fr1930_cid51_cell |
| neighbor_cell_2 = lte_band4_ch2000_fr2115_pcid1_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -23 |
| neighbor_cell_2['power'] = -22 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.PSC: serving_cell[self.PSC], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.CID: neighbor_cell_1[self.CID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PCID: neighbor_cell_2[self.PCID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1, bts2] = set_system_model_wcdma_gsm( |
| self.md8475a, self.user_params, self.ad.sim_card) |
| self._setup_wcdma_cell_md8475a(bts1, serving_cell, |
| serving_cell['power']) |
| self._setup_gsm_cell_md8475a(bts2, neighbor_cell_1, |
| neighbor_cell_1['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("GSM", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("GSM", 1, "GSM_1900_C512_F1930_CID51") |
| bts1.set_neighbor_cell_type("LTE", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("LTE", 1, "LTE_4_C2000_F2115_PCID1") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| # To make sure phone camps on BTS1 |
| bts2.service_state = BtsServiceState.SERVICE_STATE_OUT |
| |
| self.ad.droid.telephonyToggleDataConnection(False) |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_UMTS, |
| RAT_FAMILY_UMTS, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_UMTS, NETWORK_MODE_GSM_UMTS)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| bts2.service_state = BtsServiceState.SERVICE_STATE_IN |
| self.setup_3710a_waveform("1", "A", "2115MHz", |
| neighbor_cell_2['power'], "LTE", |
| "lte_4_ch2000_pcid1") |
| self.turn_on_3710a_sg(1) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="bebbe764-4c8c-4aaf-81b9-c61509a9695e") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_gsm_intrafreq_0_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when no neighbor |
| cells are present (Phone camped on GSM) |
| |
| Setup one GSM cell configuration on MD8475A |
| Make Sure Phone camped on GSM |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = gsm_band1900_ch512_fr1930_cid51_cell |
| serving_cell['power'] = -30 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| [bts1] = set_system_model_gsm(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_gsm_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_ONLY, |
| RAT_FAMILY_GSM, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_GSM, NETWORK_MODE_GSM_ONLY)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="861dd399-d6f6-4e9f-9e8d-0718966ea45a") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_gsm_intrafreq_1_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when one neighbor |
| cell is present (Phone camped on GSM) |
| |
| Setup one GSM cell configuration on MD8475A |
| Make Sure Phone camped on GSM |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = gsm_band1900_ch512_fr1930_cid51_cell |
| neighbor_cell = gsm_band1900_ch512_fr1930_cid52_cell |
| serving_cell['power'] = -20 |
| neighbor_cell['power'] = -22 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.CID: neighbor_cell_1[self.CID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1] = set_system_model_gsm(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_gsm_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("GSM", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("GSM", 1, "GSM_1900_C512_F1930_CID52") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_ONLY, |
| RAT_FAMILY_GSM, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_GSM, NETWORK_MODE_GSM_ONLY)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| time.sleep(self._ANRITSU_SETTLING_TIME) |
| self.setup_3710a_waveform("1", "A", "1930.2MHz", |
| neighbor_cell['power'], "GSM", |
| "gsm_lac52_cid52") |
| |
| self.turn_on_3710a_sg(1) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="58627a33-45bd-436d-85b2-1ca711f56794") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_gsm_intrafreq_2_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells are present (Phone camped on GSM) |
| |
| Setup one GSM cell configuration on MD8475A |
| Setup two GSM waveforms on MG3710A |
| Make Sure Phone camped on GSM |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = gsm_band1900_ch512_fr1930_cid51_cell |
| neighbor_cell_1 = gsm_band1900_ch512_fr1930_cid52_cell |
| neighbor_cell_2 = gsm_band1900_ch512_fr1930_cid53_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -24 |
| neighbor_cell_2['power'] = -22 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.CID: neighbor_cell_1[self.CID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.CID: neighbor_cell_2[self.CID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1] = set_system_model_gsm(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_gsm_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("GSM", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("GSM", 1, "GSM_1900_C512_F1930_CID52") |
| bts1.set_neighbor_cell_type("GSM", 2, "CELLNAME") |
| bts1.set_neighbor_cell_name("GSM", 2, "GSM_1900_C512_F1930_CID53") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_ONLY, |
| RAT_FAMILY_GSM, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_GSM, NETWORK_MODE_GSM_ONLY)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| self.setup_3710a_waveform("1", "A", "1930.2MHz", |
| neighbor_cell_1['power'], "GSM", |
| "gsm_lac52_cid52") |
| |
| self.setup_3710a_waveform("2", "A", "1930.2MHz", |
| neighbor_cell_2['power'], "GSM", |
| "gsm_lac53_cid53") |
| self.turn_on_3710a_sg(1) |
| self.turn_on_3710a_sg(2) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="3ff3439a-2e45-470a-a2d6-c63e37379f19") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_gsm_intrafreq_3_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when three neighbor |
| cells are present (Phone camped on GSM) |
| |
| Setup one GSM cell configuration on MD8475A |
| Setup three GSM waveforms on MG3710A |
| Make Sure Phone camped on GSM |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = gsm_band1900_ch512_fr1930_cid51_cell |
| neighbor_cell_1 = gsm_band1900_ch512_fr1930_cid52_cell |
| neighbor_cell_2 = gsm_band1900_ch512_fr1930_cid53_cell |
| neighbor_cell_3 = gsm_band1900_ch512_fr1930_cid54_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -24 |
| neighbor_cell_2['power'] = -22 |
| neighbor_cell_3['power'] = -24 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.CID: neighbor_cell_1[self.CID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.CID: neighbor_cell_2[self.CID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.CID: neighbor_cell_3[self.CID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + neighbor_cell_3['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1] = set_system_model_gsm(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_gsm_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("GSM", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("GSM", 1, "GSM_1900_C512_F1930_CID52") |
| bts1.set_neighbor_cell_type("GSM", 2, "CELLNAME") |
| bts1.set_neighbor_cell_name("GSM", 2, "GSM_1900_C512_F1930_CID53") |
| bts1.set_neighbor_cell_type("GSM", 3, "CELLNAME") |
| bts1.set_neighbor_cell_name("GSM", 3, "GSM_1900_C512_F1930_CID53") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_ONLY, |
| RAT_FAMILY_GSM, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_GSM, NETWORK_MODE_GSM_ONLY)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| self.setup_3710a_waveform("1", "A", "1930.2MHz", |
| neighbor_cell_1['power'], "GSM", |
| "gsm_lac52_cid52") |
| |
| self.setup_3710a_waveform("2", "A", "1930.2MHz", |
| neighbor_cell_2['power'], "GSM", |
| "gsm_lac53_cid53") |
| |
| self.setup_3710a_waveform("2", "B", "1930.2MHz", |
| neighbor_cell_3['power'], "GSM", |
| "gsm_lac54_cid54") |
| self.turn_on_3710a_sg(1) |
| self.turn_on_3710a_sg(2) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="0cac1370-144e-40a4-b6bc-66691926f898") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_gsm_interfreq_1_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when one neighbor |
| cells(inter frequency) is present (Phone camped on GSM) |
| |
| Setup one GSM cell configuration on MD8475A |
| Setup two GSM waveforms on MG3710A |
| Make Sure Phone camped on GSM |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = gsm_band1900_ch512_fr1930_cid51_cell |
| neighbor_cell_1 = gsm_band1900_ch640_fr1955_cid56_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -24 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.CID: neighbor_cell_1[self.CID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1] = set_system_model_gsm(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_gsm_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("GSM", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("GSM", 1, "GSM_1900_C640_F1955_CID56") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| |
| self.ad.droid.telephonyToggleDataConnection(False) |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_ONLY, |
| RAT_FAMILY_GSM, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_GSM, NETWORK_MODE_GSM_ONLY)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| self.setup_3710a_waveform("1", "A", "1955.8MHz", |
| neighbor_cell_1['power'], "GSM", |
| "gsm_lac56_cid56") |
| |
| self.turn_on_3710a_sg(1) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="5f0367dd-08b5-4871-a784-51a0f76e229b") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_gsm_interfreq_2_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells(inter frequency) are present (Phone camped on GSM) |
| |
| Setup one GSM cell configuration on MD8475A |
| Setup two GSM waveforms on MG3710A |
| Make Sure Phone camped on GSM |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = gsm_band1900_ch512_fr1930_cid51_cell |
| neighbor_cell_1 = gsm_band1900_ch640_fr1955_cid56_cell |
| neighbor_cell_2 = gsm_band1900_ch750_fr1977_cid57_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -24 |
| neighbor_cell_2['power'] = -22 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.CID: neighbor_cell_1[self.CID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.CID: neighbor_cell_2[self.CID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1] = set_system_model_gsm(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_gsm_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("GSM", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("GSM", 1, "GSM_1900_C640_F1955_CID56") |
| bts1.set_neighbor_cell_type("GSM", 2, "CELLNAME") |
| bts1.set_neighbor_cell_name("GSM", 2, "GSM_1900_C750_F1977_CID57") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| |
| self.ad.droid.telephonyToggleDataConnection(False) |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_ONLY, |
| RAT_FAMILY_GSM, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_GSM, NETWORK_MODE_GSM_ONLY)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| self.setup_3710a_waveform("1", "A", "1955.8MHz", |
| neighbor_cell_1['power'], "GSM", |
| "gsm_lac56_cid56") |
| |
| self.setup_3710a_waveform("2", "A", "1977.8MHz", |
| neighbor_cell_2['power'], "GSM", |
| "gsm_lac57_cid57") |
| self.turn_on_3710a_sg(1) |
| self.turn_on_3710a_sg(2) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="b195153f-f6a0-4ec4-bb53-29c30ec0a034") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_gsm_interband_2_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when two neighbor |
| cells(inter band) are present (Phone camped on GSM) |
| |
| Setup one GSM cell configuration on MD8475A |
| Setup two GSM waveforms on MG3710A |
| Make Sure Phone camped on GSM |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = gsm_band1900_ch512_fr1930_cid51_cell |
| neighbor_cell_1 = gsm_band850_ch128_fr869_cid58_cell |
| neighbor_cell_2 = gsm_band850_ch251_fr893_cid59_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -24 |
| neighbor_cell_2['power'] = -22 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.CID: neighbor_cell_1[self.CID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.CID: neighbor_cell_2[self.CID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1] = set_system_model_gsm(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_gsm_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("GSM", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("GSM", 1, "GSM_850_C128_F869_CID58") |
| bts1.set_neighbor_cell_type("GSM", 2, "CELLNAME") |
| bts1.set_neighbor_cell_name("GSM", 2, "GSM_850_C251_F893_CID59") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| |
| self.ad.droid.telephonyToggleDataConnection(False) |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_ONLY, |
| RAT_FAMILY_GSM, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_GSM, NETWORK_MODE_GSM_ONLY)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| self.setup_3710a_waveform("1", "A", "869MHz", neighbor_cell_1['power'], |
| "GSM", "gsm_lac58_cid58") |
| |
| self.setup_3710a_waveform("2", "A", "893MHz", neighbor_cell_2['power'], |
| "GSM", "gsm_lac59_cid59") |
| self.turn_on_3710a_sg(1) |
| self.turn_on_3710a_sg(2) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| @test_tracker_info(uuid="209f62c1-7950-447c-9101-abe930da20ba") |
| @TelephonyBaseTest.tel_test_wrap |
| def test_neighbor_cell_reporting_gsm_interrat_2_tmo(self): |
| """ Test Number of neighbor cells reported by Phone when no neighbor |
| cells(inter RAT) are present (Phone camped on GSM) |
| |
| Setup one GSM cell configuration on MD8475A |
| Setup one LTE and one GSM waveforms on MG3710A |
| Make Sure Phone camped on GSM |
| Verify the number of neighbor cells reported by Phone |
| |
| Returns: |
| True if pass; False if fail |
| """ |
| serving_cell = gsm_band1900_ch512_fr1930_cid51_cell |
| neighbor_cell_1 = lte_band4_ch2000_fr2115_pcid1_cell |
| neighbor_cell_2 = wcdma_band1_ch10700_fr2140_cid31_cell |
| serving_cell['power'] = -20 |
| neighbor_cell_1['power'] = -24 |
| neighbor_cell_2['power'] = -22 |
| |
| expected_cell_info_list = [ |
| # Serving Cell |
| { |
| self.CID: serving_cell[self.CID], |
| self.REPORT_RATE: 1, |
| self.IS_REGISTERED: True, |
| self.RAT: 'gsm', |
| self.TARGET_RSSI: |
| self._GSM_RSSI_OFFSET + serving_cell['power'], |
| self.MAX_ERROR_RSSI: 3, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| # Neighbor Cells |
| { |
| self.PCID: neighbor_cell_1[self.PCID], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'lte', |
| self.TARGET_RSSI: |
| self._LTE_RSSI_OFFSET + neighbor_cell_1['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| }, |
| { |
| self.PSC: neighbor_cell_2[self.PSC], |
| self.REPORT_RATE: 0.1, |
| self.IS_REGISTERED: False, |
| self.RAT: 'wcdma', |
| self.TARGET_RSSI: |
| self._WCDMA_RSSI_OFFSET + neighbor_cell_2['power'], |
| self.MAX_ERROR_RSSI: 4, |
| self.MAX_ERROR_AVERAGE_RSSI: 3 |
| } |
| ] |
| expected_cell_info_stats = {} |
| for sample in expected_cell_info_list: |
| expected_cell_info_stats[self._unique_cell_id(sample)] = sample |
| |
| self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE) |
| [bts1] = set_system_model_gsm(self.md8475a, self.user_params, |
| self.ad.sim_card) |
| self._setup_gsm_cell_md8475a(bts1, serving_cell, serving_cell['power']) |
| bts1.neighbor_cell_mode = "USERDATA" |
| bts1.set_neighbor_cell_type("LTE", 1, "CELLNAME") |
| bts1.set_neighbor_cell_name("LTE", 1, "LTE_4_C2000_F2115_PCID1") |
| bts1.set_neighbor_cell_type("WCDMA", 2, "CELLNAME") |
| bts1.set_neighbor_cell_name("WCDMA", 2, "WCDM_1_C10700_F2140_CID31") |
| set_usim_parameters(self.md8475a, self.ad.sim_card) |
| self.md8475a.start_simulation() |
| self.ad.droid.telephonyToggleDataConnection(False) |
| if not ensure_network_rat( |
| self.log, |
| self.ad, |
| NETWORK_MODE_GSM_ONLY, |
| RAT_FAMILY_GSM, |
| toggle_apm_after_setting=True): |
| self.log.error("Failed to set rat family {}, preferred network:{}". |
| format(RAT_FAMILY_GSM, NETWORK_MODE_GSM_ONLY)) |
| return False |
| self.md8475a.wait_for_registration_state() |
| self.setup_3710a_waveform("1", "A", "2115MHz", |
| neighbor_cell_1['power'], "LTE", |
| "lte_1_ch2000_pcid1") |
| |
| self.setup_3710a_waveform("2", "A", "2140MHz", |
| neighbor_cell_2['power'], "WCDMA", |
| "wcdma_1_psc31_cid31") |
| self.turn_on_3710a_sg(1) |
| self.turn_on_3710a_sg(2) |
| time.sleep(self._SETTLING_TIME) |
| return self._verify_cell_info(self.ad, expected_cell_info_stats) |
| |
| """ Tests End """ |
