| #!/usr/bin/env python3.4 |
| # |
| # Copyright 2021 - The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| import acts.asserts as asserts |
| from acts.controllers.android_device import SL4A_APK_NAME |
| from acts.test_decorators import test_tracker_info |
| from acts_contrib.test_utils.wifi.WifiBaseTest import WifiBaseTest |
| import acts_contrib.test_utils.net.connectivity_const as cconsts |
| import acts_contrib.test_utils.wifi.wifi_test_utils as wutils |
| import acts_contrib.test_utils.wifi.aware.aware_test_utils as autils |
| |
| WifiEnums = wutils.WifiEnums |
| |
| WIFI_NETWORK_AP_CHANNEL_2G_1 = 1 |
| WIFI_NETWORK_AP_CHANNEL_5G_1 = 36 |
| WIFI_NETWORK_AP_CHANNEL_5G_DFS_1 = 132 |
| |
| WIFI_NETWORK_AP_CHANNEL_2G_2 = 2 |
| WIFI_NETWORK_AP_CHANNEL_5G_2 = 40 |
| WIFI_NETWORK_AP_CHANNEL_5G_DFS_2 = 136 |
| |
| class WifiStaConcurrencyNetworkRequestTest(WifiBaseTest): |
| """STA + STA Tests for concurrency between intenet connectivity & |
| peer to peer connectivity using NetworkRequest with WifiNetworkSpecifier |
| API surface. |
| |
| Test Bed Requirement: |
| * one Android device |
| * Several Wi-Fi networks visible to the device, including an open Wi-Fi |
| network. |
| """ |
| def __init__(self, configs): |
| super().__init__(configs) |
| self.enable_packet_log = True |
| self.p2p_key = None |
| |
| def setup_class(self): |
| super().setup_class() |
| |
| self.dut = self.android_devices[0] |
| wutils.wifi_test_device_init(self.dut) |
| req_params = ["sta_concurrency_supported_models", "wifi6_models"] |
| opt_param = [ |
| "open_network", "reference_networks" |
| ] |
| self.unpack_userparams( |
| req_param_names=req_params, opt_param_names=opt_param) |
| |
| asserts.abort_class_if( |
| self.dut.model not in self.sta_concurrency_supported_models, |
| "Device %s doesn't support STA+STA, skipping tests") |
| |
| asserts.abort_class_if( |
| "OpenWrtAP" not in self.user_params, |
| "Setup doesn't support OpenWrt AP, skipping tests") |
| |
| |
| def setup_test(self): |
| super().setup_test() |
| self.dut.droid.wakeLockAcquireBright() |
| self.dut.droid.wakeUpNow() |
| self.remove_approvals() |
| self.clear_user_disabled_networks() |
| wutils.wifi_toggle_state(self.dut, True) |
| self.dut.ed.clear_all_events() |
| |
| def teardown_test(self): |
| super().teardown_test() |
| self.disconnect_both() |
| self.dut.droid.wakeLockRelease() |
| self.dut.droid.goToSleepNow() |
| self.dut.droid.wifiDisconnect() |
| wutils.reset_wifi(self.dut) |
| # Ensure we disconnected from the current network before the next test. |
| if self.dut.droid.wifiGetConnectionInfo()["supplicant_state"] != "disconnected": |
| wutils.wait_for_disconnect(self.dut) |
| wutils.wifi_toggle_state(self.dut, False) |
| self.dut.ed.clear_all_events() |
| # Reset access point state. |
| for ap in self.access_points: |
| ap.close() |
| |
| def teardown_class(self): |
| if "AccessPoint" in self.user_params: |
| del self.user_params["reference_networks"] |
| del self.user_params["open_network"] |
| |
| """Helper Functions""" |
| def remove_approvals(self): |
| self.dut.log.debug("Removing all approvals from sl4a app") |
| self.dut.adb.shell( |
| "cmd wifi network-requests-remove-user-approved-access-points" |
| + " " + SL4A_APK_NAME) |
| |
| def clear_user_disabled_networks(self): |
| self.dut.log.debug("Clearing user disabled networks") |
| self.dut.adb.shell( |
| "cmd wifi clear-user-disabled-networks") |
| |
| def register_network_callback_for_internet(self): |
| self.dut.log.debug("Registering network callback for wifi internet connectivity") |
| network_request = { |
| cconsts.NETWORK_CAP_TRANSPORT_TYPE_KEY : |
| cconsts.NETWORK_CAP_TRANSPORT_WIFI, |
| cconsts.NETWORK_CAP_CAPABILITY_KEY : |
| [cconsts.NETWORK_CAP_CAPABILITY_INTERNET] |
| } |
| key = self.dut.droid.connectivityRegisterNetworkCallback(network_request) |
| return key |
| |
| def connect_to_internet_and_wait_for_on_available(self, network): |
| self.dut.log.info("Triggering internet connection after registering " |
| "network callback") |
| self.internet_request_key = ( |
| self.register_network_callback_for_internet()) |
| wutils.connect_to_wifi_network(self.dut, network) |
| # Ensure that the internet connection completed and we got the |
| # ON_AVAILABLE callback. |
| autils.wait_for_event_with_keys( |
| self.dut, |
| cconsts.EVENT_NETWORK_CALLBACK, |
| 20, |
| (cconsts.NETWORK_CB_KEY_ID, self.internet_request_key), |
| (cconsts.NETWORK_CB_KEY_EVENT, cconsts.NETWORK_CB_AVAILABLE)) |
| wutils.verify_11ax_wifi_connection( |
| self.dut, self.wifi6_models, "wifi6_ap" in self.user_params) |
| |
| def connect_to_p2p_and_wait_for_on_available(self, network): |
| self.p2p_key = wutils.wifi_connect_using_network_request(self.dut, |
| network, |
| network) |
| wutils.verify_11ax_wifi_connection( |
| self.dut, self.wifi6_models, "wifi6_ap" in self.user_params) |
| |
| def ensure_both_connections_are_active(self): |
| self.dut.log.info("Ensuring both connections are active") |
| network_caps = ( |
| self.dut.droid.connectivityNetworkGetAllCapabilities()) |
| self.dut.log.info("Active network caps: %s", network_caps) |
| num_wifi_networks = 0 |
| for network_cap in network_caps: |
| transport_types = ( |
| network_cap[cconsts.NETWORK_CAP_TRANSPORT_TYPE_KEY]) |
| if cconsts.NETWORK_CAP_TRANSPORT_WIFI in transport_types: |
| num_wifi_networks += 1 |
| self.dut.log.info("Wifi connection %s: %s", |
| num_wifi_networks, network_cap) |
| asserts.assert_equal(2, num_wifi_networks, "Expected 2 wifi networks") |
| |
| |
| def ensure_both_connections_are_active_and_dont_disconnect(self): |
| self.ensure_both_connections_are_active() |
| |
| # Don't use the key_id in event to ensure there are no disconnects |
| # from either connection. |
| self.dut.log.info("Ensuring no connection loss") |
| autils.fail_on_event_with_keys( |
| self.dut, |
| cconsts.EVENT_NETWORK_CALLBACK, |
| 20, |
| (cconsts.NETWORK_CB_KEY_EVENT, cconsts.NETWORK_CB_LOST)) |
| |
| def disconnect_both(self): |
| self.dut.log.info("Disconnecting both connections") |
| if self.p2p_key: |
| asserts.assert_true( |
| self.dut.droid.connectivityUnregisterNetworkCallback( |
| self.p2p_key), |
| "Failed to release the p2p request") |
| self.p2p_key = None |
| self.dut.droid.wifiDisconnect() |
| |
| def configure_ap(self, |
| channel_2g=None, |
| channel_5g=None, |
| channel_2g_ap2=None, |
| channel_5g_ap2=None, |
| mirror_ap=False, |
| ap_count=1): |
| """Configure ap based on test requirements.""" |
| if ap_count==1: |
| self.configure_openwrt_ap_and_start( |
| wpa_network=True, |
| channel_2g=WIFI_NETWORK_AP_CHANNEL_2G_1, |
| channel_5g=WIFI_NETWORK_AP_CHANNEL_5G_1, |
| ap_count=1) |
| elif ap_count == 2 and channel_2g_ap2: |
| self.configure_openwrt_ap_and_start( |
| wpa_network=True, |
| channel_2g=WIFI_NETWORK_AP_CHANNEL_2G_1, |
| channel_2g_ap2=WIFI_NETWORK_AP_CHANNEL_2G_2, |
| mirror_ap=mirror_ap, |
| ap_count=2) |
| elif ap_count == 2 and channel_5g_ap2: |
| self.configure_openwrt_ap_and_start( |
| wpa_network=True, |
| channel_5g=WIFI_NETWORK_AP_CHANNEL_5G_1, |
| channel_5g_ap2=WIFI_NETWORK_AP_CHANNEL_5G_2, |
| mirror_ap=mirror_ap, |
| ap_count=2) |
| |
| @test_tracker_info(uuid="64a6c35f-d45d-431f-83e8-7fcfaef943e2") |
| def test_connect_to_2g_p2p_while_connected_to_5g_internet(self): |
| """ |
| Initiates a connection to a peer to peer network via network request while |
| already connected to an internet connectivity network. |
| |
| Steps: |
| 1. Setup 5G & 2G band WPA-PSK networks. |
| 2. Connect to WPA-PSK 5G network for internet connectivity. |
| 3. Send a network specifier with the specific SSID/credentials of |
| WPA-PSK 2G network. |
| 4. Wait for platform to scan and find matching networks. |
| 5. Simulate user selecting the network. |
| 6. Ensure that the device connects to the network. |
| 7. Ensure that the device remains connected to both the networks. |
| 8. Disconnect both connections. |
| """ |
| self.configure_ap( |
| channel_2g=WIFI_NETWORK_AP_CHANNEL_2G_1, |
| channel_5g=WIFI_NETWORK_AP_CHANNEL_5G_1, |
| ap_count=1) |
| |
| self.connect_to_internet_and_wait_for_on_available( |
| self.wpa_networks[0]["5g"]) |
| self.connect_to_p2p_and_wait_for_on_available( |
| self.wpa_networks[0]["2g"]) |
| |
| self.ensure_both_connections_are_active_and_dont_disconnect() |
| |
| |
| @test_tracker_info(uuid="aa8af713-5d97-4f05-8104-e697f0055d6e") |
| def test_connect_to_2g_internet_while_connected_to_5g_p2p(self): |
| """ |
| Initiates a connection to a peer to peer network via network request while |
| already connected to an internet connectivity network. |
| |
| Steps: |
| 1. Setup 5G & 2G band WPA-PSK networks. |
| 2. Send a network specifier with the specific SSID/credentials of |
| WPA-PSK 5G network. |
| 3. Wait for platform to scan and find matching networks. |
| 4. Simulate user selecting the network. |
| 5. Ensure that the device connects to the network. |
| 6. Connect to WPA-PSK 2G network for internet connectivity. |
| 7. Ensure that the device remains connected to both the networks. |
| 8. Disconnect both connections. |
| """ |
| self.configure_ap( |
| channel_2g=WIFI_NETWORK_AP_CHANNEL_2G_1, |
| channel_5g=WIFI_NETWORK_AP_CHANNEL_5G_1, |
| ap_count=1) |
| |
| self.connect_to_p2p_and_wait_for_on_available( |
| self.wpa_networks[0]["5g"]) |
| self.connect_to_internet_and_wait_for_on_available( |
| self.wpa_networks[0]["2g"]) |
| |
| self.ensure_both_connections_are_active_and_dont_disconnect() |
| |
| |
| @test_tracker_info(uuid="64dd09a7-28f6-4000-b1a1-10302922641b") |
| def test_connect_to_2g_internet_while_connected_to_2g_p2p(self): |
| """ |
| Initiates a connection to a peer to peer network via network request while |
| already connected to an internet connectivity network. |
| |
| Steps: |
| 1. Setup 2 5G & 2G band WPA-PSK networks. |
| 2. Send a network specifier with the specific SSID/credentials of |
| WPA-PSK 2G network. |
| 3. Wait for platform to scan and find matching networks. |
| 4. Simulate user selecting the network. |
| 5. Ensure that the device connects to the network. |
| 6. Connect to WPA-PSK 2G network for internet connectivity. |
| 7. Ensure that the device remains connected to both the networks. |
| 8. Disconnect both connections. |
| """ |
| self.configure_ap( |
| channel_2g=WIFI_NETWORK_AP_CHANNEL_2G_1, |
| channel_2g_ap2=WIFI_NETWORK_AP_CHANNEL_2G_2, |
| ap_count=2) |
| |
| self.connect_to_p2p_and_wait_for_on_available( |
| self.wpa_networks[0]["2g"]) |
| self.connect_to_internet_and_wait_for_on_available( |
| self.wpa_networks[1]["2g"]) |
| |
| self.ensure_both_connections_are_active_and_dont_disconnect() |
| |
| |
| @test_tracker_info(uuid="0c3df2f1-7311-4dd2-b0dc-1de4bd731495") |
| def test_connect_to_5g_internet_while_connected_to_5g_p2p(self): |
| """ |
| Initiates a connection to a peer to peer network via network request while |
| already connected to an internet connectivity network. |
| |
| Steps: |
| 1. Setup 2 5G & 2G band WPA-PSK networks. |
| 2. Send a network specifier with the specific SSID/credentials of |
| WPA-PSK 5G network. |
| 3. Wait for platform to scan and find matching networks. |
| 4. Simulate user selecting the network. |
| 5. Ensure that the device connects to the network. |
| 6. Connect to WPA-PSK 5G network for internet connectivity. |
| 7. Ensure that the device remains connected to both the networks. |
| 8. Disconnect both connections. |
| """ |
| self.configure_ap( |
| channel_5g=WIFI_NETWORK_AP_CHANNEL_5G_1, |
| channel_5g_ap2=WIFI_NETWORK_AP_CHANNEL_5G_2, |
| ap_count=2) |
| |
| self.connect_to_p2p_and_wait_for_on_available( |
| self.wpa_networks[0]["5g"]) |
| self.connect_to_internet_and_wait_for_on_available( |
| self.wpa_networks[1]["5g"]) |
| |
| self.ensure_both_connections_are_active_and_dont_disconnect() |
| |
| @test_tracker_info(uuid="be22f7f8-b761-4f40-8d10-ff802761cb8b") |
| def test_connect_to_5g_dfs_internet_while_connected_to_5g_dfs_p2p(self): |
| """ |
| Initiates a connection to a peer to peer network via network request while |
| already connected to an internet connectivity network. |
| |
| Steps: |
| 1. Setup 2 5G-DFS & 2G band WPA-PSK networks. |
| 2. Send a network specifier with the specific SSID/credentials of |
| WPA-PSK 5G-DFS network. |
| 3. Wait for platform to scan and find matching networks. |
| 4. Simulate user selecting the network. |
| 5. Ensure that the device connects to the network. |
| 6. Connect to WPA-PSK 5G network for internet connectivity. |
| 7. Ensure that the device remains connected to both the networks. |
| 8. Disconnect both connections. |
| """ |
| self.configure_ap( |
| channel_5g=WIFI_NETWORK_AP_CHANNEL_5G_DFS_1, |
| channel_5g_ap2=WIFI_NETWORK_AP_CHANNEL_5G_DFS_2, |
| ap_count=2) |
| |
| self.connect_to_p2p_and_wait_for_on_available( |
| self.wpa_networks[0]["5g"]) |
| self.connect_to_internet_and_wait_for_on_available( |
| self.wpa_networks[1]["5g"]) |
| |
| self.ensure_both_connections_are_active_and_dont_disconnect() |
| |
| @test_tracker_info(uuid="dc390b3f-2856-4c96-880b-9732e3dc228f") |
| def test_connect_to_2g_internet_while_connected_to_2g_p2p_same_ssid(self): |
| """ |
| Initiates a connection to a peer to peer network via network request while |
| already connected to an internet connectivity network. |
| |
| Steps: |
| 1. Setup 2 5G & 2G band WPA-PSK networks with the same SSID. |
| 2. Send a network specifier with the specific SSID/credentials of |
| WPA-PSK 2G network. |
| 3. Wait for platform to scan and find matching networks. |
| 4. Simulate user selecting the network. |
| 5. Ensure that the device connects to the network. |
| 6. Connect to WPA-PSK 2G network for internet connectivity. |
| 7. Ensure that the device remains connected to both the networks. |
| 8. Disconnect both connections. |
| """ |
| self.configure_ap( |
| channel_2g=WIFI_NETWORK_AP_CHANNEL_2G_1, |
| channel_2g_ap2=WIFI_NETWORK_AP_CHANNEL_2G_2, |
| mirror_ap=True, |
| ap_count=2) |
| |
| self.connect_to_p2p_and_wait_for_on_available( |
| self.wpa_networks[0]["2g"]) |
| self.connect_to_internet_and_wait_for_on_available( |
| self.wpa_networks[0]["2g"]) |
| |
| self.ensure_both_connections_are_active_and_dont_disconnect() |
| |
| @test_tracker_info(uuid="033d324d-94e0-440e-9532-993bc2682269") |
| def test_connect_to_5g_p2p_while_connected_to_5g_internet_same_ssid(self): |
| """ |
| Initiates a connection to a peer to peer network via network request while |
| already connected to an internet connectivity network. |
| |
| Steps: |
| 1. Setup 2 5G & 2G band WPA-PSK networks with the same SSID. |
| 2. Connect to WPA-PSK 5G network for internet connectivity. |
| 3. Send a network specifier with the specific SSID/credentials of |
| WPA-PSK 5G network (with the other bssid). |
| 4. Wait for platform to scan and find matching networks. |
| 5. Simulate user selecting the network. |
| 6. Ensure that the device connects to the network. |
| 7. Ensure that the device remains connected to both the networks. |
| 8. Disconnect both connections. |
| """ |
| self.configure_ap( |
| channel_5g=WIFI_NETWORK_AP_CHANNEL_5G_1, |
| channel_5g_ap2=WIFI_NETWORK_AP_CHANNEL_5G_2, |
| mirror_ap=True, |
| ap_count=2) |
| |
| self.connect_to_internet_and_wait_for_on_available( |
| self.wpa_networks[0]["5g"]) |
| |
| ssid = self.wpa_networks[0]["5g"][WifiEnums.SSID_KEY] |
| bssids = [self.bssid_map[0]["5g"][ssid], self.bssid_map[1]["5g"][ssid]] |
| # Find the internet connection bssid. |
| wifi_info = self.dut.droid.wifiGetConnectionInfo() |
| connected_bssid = wifi_info[WifiEnums.BSSID_KEY].upper() |
| # Find the bssid of the other access point with same ssid. |
| p2p_bssid = set(bssids) - {connected_bssid} |
| |
| # Construct specifier for the other bssid. |
| network_specifier_with_bssid = self.wpa_networks[0]["5g"].copy() |
| network_specifier_with_bssid[WifiEnums.BSSID_KEY] = next(iter(p2p_bssid)) |
| self.connect_to_p2p_and_wait_for_on_available( |
| network_specifier_with_bssid) |
| |
| self.ensure_both_connections_are_active_and_dont_disconnect() |
