Google Git
Sign in
android / platform / tools / test / connectivity / 086dfbde2edad585a3aad0ed2669668ead653da8 / . / acts / framework / acts / controllers / anritsu_lib / md8475a.py
blob: 2f2865f40df249afcc872feaa546c607c31d3e6e [file] [log] [blame]
#!/usr/bin/env python3
#
# Copyright 2016 - The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""
Controller interface for Anritsu Signalling Tester MD8475A.
"""
import logging
import time
import socket
from enum import Enum
from enum import IntEnum
from acts.controllers.anritsu_lib._anritsu_utils import AnritsuError
from acts.controllers.anritsu_lib._anritsu_utils import AnritsuUtils
from acts.controllers.anritsu_lib._anritsu_utils import NO_ERROR
from acts.controllers.anritsu_lib._anritsu_utils import OPERATION_COMPLETE
from acts import tracelogger
TERMINATOR = "\0"
# The following wait times (except COMMUNICATION_STATE_WAIT_TIME) are actually
# the times for socket to time out. Increasing them is to make sure there is
# enough time for MD8475A operation to be completed in some cases.
# It won't increase test execution time.
SMARTSTUDIO_LAUNCH_WAIT_TIME = 300 # was 90
SMARTSTUDIO_SIMULATION_START_WAIT_TIME = 300 # was 120
REGISTRATION_STATE_WAIT_TIME = 240
LOAD_SIMULATION_PARAM_FILE_WAIT_TIME = 30
COMMUNICATION_STATE_WAIT_TIME = 240
ANRITSU_SOCKET_BUFFER_SIZE = 8192
COMMAND_COMPLETE_WAIT_TIME = 180 # was 90
SETTLING_TIME = 1
WAIT_TIME_IDENTITY_RESPONSE = 5
IDLE_STATE_WAIT_TIME = 240
IMSI_READ_USERDATA_WCDMA = "081501"
IMEI_READ_USERDATA_WCDMA = "081502"
IMEISV_READ_USERDATA_WCDMA = "081503"
IMSI_READ_USERDATA_LTE = "075501"
IMEI_READ_USERDATA_LTE = "075502"
IMEISV_READ_USERDATA_LTE = "075503"
IMSI_READ_USERDATA_GSM = "081501"
IMEI_READ_USERDATA_GSM = "081502"
IMEISV_READ_USERDATA_GSM = "081503"
IDENTITY_REQ_DATA_LEN = 24
SEQ_LOG_MESSAGE_START_INDEX = 60
WCDMA_BANDS = {
"I": "1",
"II": "2",
"III": "3",
"IV": "4",
"V": "5",
"VI": "6",
"VII": "7",
"VIII": "8",
"IX": "9",
"X": "10",
"XI": "11",
"XII": "12",
"XIII": "13",
"XIV": "14"
}
def create(configs):
objs = []
for c in configs:
ip_address = c["ip_address"]
objs.append(MD8475A(ip_address))
return objs
def destroy(objs):
return
class ProcessingStatus(Enum):
''' MD8475A processing status for UE,Packet,Voice,Video,SMS,
PPP, PWS '''
PROCESS_STATUS_NONE = "NONE"
PROCESS_STATUS_NOTRUN = "NOTRUN"
PROCESS_STATUS_POWEROFF = "POWEROFF"
PROCESS_STATUS_REGISTRATION = "REGISTRATION"
PROCESS_STATUS_DETACH = "DETACH"
PROCESS_STATUS_IDLE = "IDLE"
PROCESS_STATUS_ORIGINATION = "ORIGINATION"
PROCESS_STATUS_HANDOVER = "HANDOVER"
PROCESS_STATUS_UPDATING = "UPDATING"
PROCESS_STATUS_TERMINATION = "TERMINATION"
PROCESS_STATUS_COMMUNICATION = "COMMUNICATION"
PROCESS_STATUS_UERELEASE = "UERELEASE"
PROCESS_STATUS_NWRELEASE = "NWRELEASE"
class BtsNumber(Enum):
'''ID number for MD8475A supported BTS '''
BTS1 = "BTS1"
BTS2 = "BTS2"
BTS3 = "BTS3"
BTS4 = "BTS4"
BTS5 = "BTS5"
class BtsTechnology(Enum):
''' BTS system technology'''
LTE = "LTE"
WCDMA = "WCDMA"
TDSCDMA = "TDSCDMA"
GSM = "GSM"
CDMA1X = "CDMA1X"
EVDO = "EVDO"
class BtsBandwidth(Enum):
''' Values for Cell Bandwidth '''
LTE_BANDWIDTH_1dot4MHz = "1.4MHz"
LTE_BANDWIDTH_3MHz = "3MHz"
LTE_BANDWIDTH_5MHz = "5MHz"
LTE_BANDWIDTH_10MHz = "10MHz"
LTE_BANDWIDTH_15MHz = "15MHz"
LTE_BANDWIDTH_20MHz = "20MHz"
def get_float_value(bts_bandwidth):
""" Returns a float representing the bandwidth in MHz.
Args:
bts_bandwidth: a BtsBandwidth enum or a string matching one of the
values in the BtsBandwidth enum.
"""
if isinstance(bts_bandwidth, BtsBandwidth):
bandwidth_str = bts_bandwidth.value
elif isinstance(bts_bandwidth, str):
bandwidth_str = bts_bandwidth
else:
raise TypeError('bts_bandwidth should be an instance of string or '
'BtsBandwidth. ')
if bandwidth_str == BtsBandwidth.LTE_BANDWIDTH_20MHz.value:
return 20
elif bandwidth_str == BtsBandwidth.LTE_BANDWIDTH_15MHz.value:
return 15
elif bandwidth_str == BtsBandwidth.LTE_BANDWIDTH_10MHz.value:
return 10
elif bandwidth_str == BtsBandwidth.LTE_BANDWIDTH_5MHz.value:
return 5
elif bandwidth_str == BtsBandwidth.LTE_BANDWIDTH_3MHz.value:
return 3
elif bandwidth_str == BtsBandwidth.LTE_BANDWIDTH_1dot4MHz.value:
return 1.4
else:
raise ValueError(
'Could not map {} to a bandwidth value.'.format(bandwidth_str))
MAX_NRB_FOR_BANDWIDTH = {
BtsBandwidth.LTE_BANDWIDTH_1dot4MHz.value: 6,
BtsBandwidth.LTE_BANDWIDTH_3MHz.value: 15,
BtsBandwidth.LTE_BANDWIDTH_5MHz.value: 25,
BtsBandwidth.LTE_BANDWIDTH_10MHz.value: 50,
BtsBandwidth.LTE_BANDWIDTH_15MHz.value: 75,
BtsBandwidth.LTE_BANDWIDTH_20MHz.value: 100
}
class LteMimoMode(Enum):
""" Values for LTE MIMO modes. """
NONE = "MIMONOT"
MIMO_2X2 = "MIMO2X2"
MIMO_4X4 = "MIMO4X4"
class BtsGprsMode(Enum):
''' Values for Gprs Modes '''
NO_GPRS = "NO_GPRS"
GPRS = "GPRS"
EGPRS = "EGPRS"
class BtsPacketRate(Enum):
''' Values for Cell Packet rate '''
LTE_MANUAL = "MANUAL"
LTE_BESTEFFORT = "BESTEFFORT"
WCDMA_DL384K_UL64K = "DL384K_UL64K"
WCDMA_DLHSAUTO_REL7_UL384K = "DLHSAUTO_REL7_UL384K"
WCDMA_DL18_0M_UL384K = "DL18_0M_UL384K"
WCDMA_DL21_6M_UL384K = "DL21_6M_UL384K"
WCDMA_DLHSAUTO_REL7_ULHSAUTO = "DLHSAUTO_REL7_ULHSAUTO"
WCDMA_DL18_0M_UL1_46M = "DL18_0M_UL1_46M"
WCDMA_DL18_0M_UL2_0M = "DL18_0M_UL2_0M"
WCDMA_DL18_0M_UL5_76M = "DL18_0M_UL5_76M"
WCDMA_DL21_6M_UL1_46M = "DL21_6M_UL1_46M"
WCDMA_DL21_6M_UL2_0M = "DL21_6M_UL2_0M"
WCDMA_DL21_6M_UL5_76M = "DL21_6M_UL5_76M"
WCDMA_DLHSAUTO_REL8_UL384K = "DLHSAUTO_REL8_UL384K"
WCDMA_DL23_4M_UL384K = "DL23_4M_UL384K"
WCDMA_DL28_0M_UL384K = "DL28_0M_UL384K"
WCDMA_DL36_0M_UL384K = "DL36_0M_UL384K"
WCDMA_DL43_2M_UL384K = "DL43_2M_UL384K"
WCDMA_DLHSAUTO_REL8_ULHSAUTO = "DLHSAUTO_REL8_ULHSAUTO"
WCDMA_DL23_4M_UL1_46M = "DL23_4M_UL1_46M"
WCDMA_DL23_4M_UL2_0M = "DL23_4M_UL2_0M"
WCDMA_DL23_4M_UL5_76M = "DL23_4M_UL5_76M"
WCDMA_DL28_0M_UL1_46M = "DL28_0M_UL1_46M"
WCDMA_DL28_0M_UL2_0M = "DL28_0M_UL2_0M"
WCDMA_DL28_0M_UL5_76M = "L28_0M_UL5_76M"
WCDMA_DL36_0M_UL1_46M = "DL36_0M_UL1_46M"
WCDMA_DL36_0M_UL2_0M = "DL36_0M_UL2_0M"
WCDMA_DL36_0M_UL5_76M = "DL36_0M_UL5_76M"
WCDMA_DL43_2M_UL1_46M = "DL43_2M_UL1_46M"
WCDMA_DL43_2M_UL2_0M = "DL43_2M_UL2_0M"
WCDMA_DL43_2M_UL5_76M = "DL43_2M_UL5_76M"
class BtsPacketWindowSize(Enum):
''' Values for Cell Packet window size '''
WINDOW_SIZE_1 = 1
WINDOW_SIZE_8 = 8
WINDOW_SIZE_16 = 16
WINDOW_SIZE_32 = 32
WINDOW_SIZE_64 = 64
WINDOW_SIZE_128 = 128
WINDOW_SIZE_256 = 256
WINDOW_SIZE_512 = 512
WINDOW_SIZE_768 = 768
WINDOW_SIZE_1024 = 1024
WINDOW_SIZE_1536 = 1536
WINDOW_SIZE_2047 = 2047
class BtsServiceState(Enum):
''' Values for BTS service state '''
SERVICE_STATE_IN = "IN"
SERVICE_STATE_OUT = "OUT"
class BtsCellBarred(Enum):
''' Values for Cell barred parameter '''
NOTBARRED = "NOTBARRED"
BARRED = "BARRED"
class BtsAccessClassBarred(Enum):
''' Values for Access class barred parameter '''
NOTBARRED = "NOTBARRED"
EMERGENCY = "EMERGENCY"
BARRED = "BARRED"
USERSPECIFIC = "USERSPECIFIC"
class BtsLteEmergencyAccessClassBarred(Enum):
''' Values for Lte emergency access class barred parameter '''
NOTBARRED = "NOTBARRED"
BARRED = "BARRED"
class BtsNwNameEnable(Enum):
''' Values for BT network name enable parameter '''
NAME_ENABLE = "ON"
NAME_DISABLE = "OFF"
class IPAddressType(Enum):
''' Values for IP address type '''
IPV4 = "IPV4"
IPV6 = "IPV6"
IPV4V6 = "IPV4V6"
class TriggerMessageIDs(Enum):
''' ID for Trigger messages '''
RRC_CONNECTION_REQ = 111101
RRC_CONN_REESTABLISH_REQ = 111100
ATTACH_REQ = 141141
DETACH_REQ = 141145
MM_LOC_UPDATE_REQ = 221108
GMM_ATTACH_REQ = 241101
GMM_RA_UPDATE_REQ = 241108
IDENTITY_REQUEST_LTE = 141155
IDENTITY_REQUEST_WCDMA = 241115
IDENTITY_REQUEST_GSM = 641115
UE_CAPABILITY_ENQUIRY = 111167
class TriggerMessageReply(Enum):
''' Values for Trigger message reply parameter '''
ACCEPT = "ACCEPT"
REJECT = "REJECT"
IGNORE = "IGNORE"
NONE = "NONE"
ILLEGAL = "ILLEGAL"
class TestProcedure(Enum):
''' Values for different Test procedures in MD8475A '''
PROCEDURE_BL = "BL"
PROCEDURE_SELECTION = "SELECTION"
PROCEDURE_RESELECTION = "RESELECTION"
PROCEDURE_REDIRECTION = "REDIRECTION"
PROCEDURE_HO = "HO"
PROCEDURE_HHO = "HHO"
PROCEDURE_SHO = "SHO"
PROCEDURE_MEASUREMENT = "MEASUREMENT"
PROCEDURE_CELLCHANGE = "CELLCHANGE"
PROCEDURE_MULTICELL = "MULTICELL"
class TestPowerControl(Enum):
''' Values for power control in test procedure '''
POWER_CONTROL_ENABLE = "ENABLE"
POWER_CONTROL_DISABLE = "DISABLE"
class TestMeasurement(Enum):
''' Values for mesaurement in test procedure '''
MEASUREMENT_ENABLE = "ENABLE"
MEASUREMENT_DISABLE = "DISABLE"
'''MD8475A processing states'''
_PROCESS_STATES = {
"NONE": ProcessingStatus.PROCESS_STATUS_NONE,
"NOTRUN": ProcessingStatus.PROCESS_STATUS_NOTRUN,
"POWEROFF": ProcessingStatus.PROCESS_STATUS_POWEROFF,
"REGISTRATION": ProcessingStatus.PROCESS_STATUS_REGISTRATION,
"DETACH": ProcessingStatus.PROCESS_STATUS_DETACH,
"IDLE": ProcessingStatus.PROCESS_STATUS_IDLE,
"ORIGINATION": ProcessingStatus.PROCESS_STATUS_ORIGINATION,
"HANDOVER": ProcessingStatus.PROCESS_STATUS_HANDOVER,
"UPDATING": ProcessingStatus.PROCESS_STATUS_UPDATING,
"TERMINATION": ProcessingStatus.PROCESS_STATUS_TERMINATION,
"COMMUNICATION": ProcessingStatus.PROCESS_STATUS_COMMUNICATION,
"UERELEASE": ProcessingStatus.PROCESS_STATUS_UERELEASE,
"NWRELEASE": ProcessingStatus.PROCESS_STATUS_NWRELEASE,
}
class ImsCscfStatus(Enum):
""" MD8475A ims cscf status for UE
"""
OFF = "OFF"
SIPIDLE = "SIPIDLE"
CONNECTED = "CONNECTED"
CALLING = "CALLING"
RINGING = "RINGING"
UNKNOWN = "UNKNOWN"
class ImsCscfCall(Enum):
""" MD8475A ims cscf call action
"""
MAKE = "MAKE"
END = "END"
MAKEVIDEO = "MAKEVIDEO"
MAKE2ND = "MAKE2ND"
END2ND = "END2ND"
ANSWER = "ANSWER"
HOLD = "HOLD"
RESUME = "RESUME"
class VirtualPhoneStatus(IntEnum):
''' MD8475A virtual phone status for UE voice and UE video
PPP, PWS '''
STATUS_IDLE = 0
STATUS_VOICECALL_ORIGINATION = 1
STATUS_VOICECALL_INCOMING = 2
STATUS_VOICECALL_INPROGRESS = 3
STATUS_VOICECALL_DISCONNECTING = 4
STATUS_VOICECALL_DISCONNECTED = 5
STATUS_VIDEOCALL_ORIGINATION = 6
STATUS_VIDEOCALL_INCOMING = 7
STATUS_VIDEOCALL_INPROGRESS = 8
STATUS_VIDEOCALL_DISCONNECTING = 9
STATUS_VIDEOCALL_DISCONNECTED = 10
'''Virtual Phone Status '''
_VP_STATUS = {
"0": VirtualPhoneStatus.STATUS_IDLE,
"1": VirtualPhoneStatus.STATUS_VOICECALL_ORIGINATION,
"2": VirtualPhoneStatus.STATUS_VOICECALL_INCOMING,
"3": VirtualPhoneStatus.STATUS_VOICECALL_INPROGRESS,
"4": VirtualPhoneStatus.STATUS_VOICECALL_DISCONNECTING,
"5": VirtualPhoneStatus.STATUS_VOICECALL_DISCONNECTED,
"6": VirtualPhoneStatus.STATUS_VIDEOCALL_ORIGINATION,
"7": VirtualPhoneStatus.STATUS_VIDEOCALL_INCOMING,
"8": VirtualPhoneStatus.STATUS_VIDEOCALL_INPROGRESS,
"9": VirtualPhoneStatus.STATUS_VIDEOCALL_DISCONNECTING,
"10": VirtualPhoneStatus.STATUS_VIDEOCALL_DISCONNECTED,
}
class VirtualPhoneAutoAnswer(Enum):
''' Virtual phone auto answer enable values'''
ON = "ON"
OFF = "OFF"
class CsfbType(Enum):
''' CSFB Type values'''
CSFB_TYPE_REDIRECTION = "REDIRECTION"
CSFB_TYPE_HANDOVER = "HO"
class ReturnToEUTRAN(Enum):
'''Return to EUTRAN setting values '''
RETEUTRAN_ENABLE = "ENABLE"
RETEUTRAN_DISABLE = "DISABLE"
class CTCHSetup(Enum):
'''CTCH setting values '''
CTCH_ENABLE = "ENABLE"
CTCH_DISABLE = "DISABLE"
class UEIdentityType(Enum):
'''UE Identity type values '''
IMSI = "IMSI"
IMEI = "IMEI"
IMEISV = "IMEISV"
class CBCHSetup(Enum):
'''CBCH setting values '''
CBCH_ENABLE = "ENABLE"
CBCH_DISABLE = "DISABLE"
class Switch(Enum):
''' Values for ENABLE or DISABLE '''
ENABLE = "ENABLE"
DISABLE = "DISABLE"
class ModulationType(Enum):
"""Supported Modulation Types."""
Q16 = '16QAM'
Q64 = '64QAM'
Q256 = '256QAM'
class MD8475A(object):
"""Class to communicate with Anritsu MD8475A Signalling Tester.
This uses GPIB command to interface with Anritsu MD8475A """
def __init__(self, ip_address, wlan=False, md8475_version="A"):
self._error_reporting = True
self._ipaddr = ip_address
self.log = tracelogger.TraceLogger(logging.getLogger())
self._wlan = wlan
port_number = 28002
self._md8475_version = md8475_version
if md8475_version == "B":
global TERMINATOR
TERMINATOR = "\n"
port_number = 5025
# Open socket connection to Signaling Tester
self.log.info("Opening Socket Connection with "
"Signaling Tester ({}) ".format(self._ipaddr))
try:
self._sock = socket.create_connection((self._ipaddr, port_number),
timeout=120)
self.send_query("*IDN?", 60)
self.log.info("Communication with Signaling Tester OK.")
self.log.info("Opened Socket connection to ({})"
"with handle ({})".format(self._ipaddr, self._sock))
# launching Smart Studio Application needed for the simulation
ret = self.launch_smartstudio()
except socket.timeout:
raise AnritsuError("Timeout happened while conencting to"
" Anritsu MD8475A")
except socket.error:
raise AnritsuError("Socket creation error")
def get_BTS(self, btsnumber):
""" Returns the BTS object based on the BTS number provided
Args:
btsnumber: BTS number (BTS1, BTS2)
Returns:
BTS object
"""
return _BaseTransceiverStation(self, btsnumber)
def get_AnritsuTestCases(self):
""" Returns the Anritsu Test Case Module Object
Args:
None
Returns:
Anritsu Test Case Module Object
"""
return _AnritsuTestCases(self)
def get_VirtualPhone(self):
""" Returns the Anritsu Virtual Phone Module Object
Args:
None
Returns:
Anritsu Virtual Phone Module Object
"""
return _VirtualPhone(self)
def get_PDN(self, pdn_number):
""" Returns the PDN Module Object
Args:
None
Returns:
Anritsu PDN Module Object
"""
return _PacketDataNetwork(self, pdn_number)
def get_TriggerMessage(self):
""" Returns the Anritsu Trigger Message Module Object
Args:
None
Returns:
Anritsu Trigger Message Module Object
"""
return _TriggerMessage(self)
def get_IMS(self, vnid):
""" Returns the IMS Module Object with VNID
Args:
vnid: Virtual Network ID
Returns:
Anritsu IMS VNID Module Object
"""
return _IMS_Services(self, vnid)
def get_ims_cscf_status(self, virtual_network_id):
""" Get the IMS CSCF Status of virtual network
Args:
virtual_network_id: virtual network id
Returns:
IMS CSCF status
"""
cmd = "IMSCSCFSTAT? {}".format(virtual_network_id)
return self.send_query(cmd)
def ims_cscf_call_action(self, virtual_network_id, action):
""" IMS CSCF Call action
Args:
virtual_network_id: virtual network id
action: action to make
Returns:
None
"""
cmd = "IMSCSCFCALL {},{}".format(virtual_network_id, action)
self.send_command(cmd)
def send_query(self, query, sock_timeout=120):
""" Sends a Query message to Anritsu and return response
Args:
query - Query string
Returns:
query response
"""
self.log.info("--> {}".format(query))
querytoSend = (query + TERMINATOR).encode('utf-8')
self._sock.settimeout(sock_timeout)
try:
self._sock.send(querytoSend)
result = self._sock.recv(ANRITSU_SOCKET_BUFFER_SIZE).rstrip(
TERMINATOR.encode('utf-8'))
response = result.decode('utf-8')
self.log.info('<-- {}'.format(response))
return response
except socket.timeout:
raise AnritsuError("Timeout: Response from Anritsu")
except socket.error:
raise AnritsuError("Socket Error")
def send_command(self, command, sock_timeout=120):
""" Sends a Command message to Anritsu
Args:
command - command string
Returns:
None
"""
self.log.info("--> {}".format(command))
if self._error_reporting:
cmdToSend = (command + ";ERROR?" + TERMINATOR).encode('utf-8')
self._sock.settimeout(sock_timeout)
try:
self._sock.send(cmdToSend)
err = self._sock.recv(ANRITSU_SOCKET_BUFFER_SIZE).rstrip(
TERMINATOR.encode('utf-8'))
error = int(err.decode('utf-8'))
if error != NO_ERROR:
raise AnritsuError(error, command)
except socket.timeout:
raise AnritsuError("Timeout for Command Response from Anritsu")
except socket.error:
raise AnritsuError("Socket Error for Anritsu command")
except Exception as e:
raise AnritsuError(e, command)
else:
cmdToSend = (command + TERMINATOR).encode('utf-8')
try:
self._sock.send(cmdToSend)
except socket.error:
raise AnritsuError("Socket Error", command)
return
def launch_smartstudio(self):
""" launch the Smart studio application
This should be done before stating simulation
Args:
None
Returns:
None
"""
# check the Smart Studio status . If Smart Studio doesn't exist ,
# start it.if it is running, stop it. Smart Studio should be in
# NOTRUN (Simulation Stopped) state to start new simulation
stat = self.send_query("STAT?", 30)
if stat == "NOTEXIST":
self.log.info("Launching Smart Studio Application,"
"it takes about a minute.")
time_to_wait = SMARTSTUDIO_LAUNCH_WAIT_TIME
sleep_interval = 15
waiting_time = 0
err = self.send_command("RUN", SMARTSTUDIO_LAUNCH_WAIT_TIME)
stat = self.send_query("STAT?")
while stat != "NOTRUN":
time.sleep(sleep_interval)
waiting_time = waiting_time + sleep_interval
if waiting_time <= time_to_wait:
stat = self.send_query("STAT?")
else:
raise AnritsuError("Timeout: Smart Studio launch")
elif stat == "RUNNING":
# Stop simulation if necessary
self.send_command("STOP", 60)
stat = self.send_query("STAT?")
# The state of the Smart Studio should be NOTRUN at this point
# after the one of the steps from above
if stat != "NOTRUN":
self.log.info(
"Can not launch Smart Studio, "
"please shut down all the Smart Studio SW components")
raise AnritsuError("Could not run SmartStudio")
def close_smartstudio(self):
""" Closes the Smart studio application
Args:
None
Returns:
None
"""
self.stop_simulation()
self.send_command("EXIT", 60)
def get_smartstudio_status(self):
""" Gets the Smart studio status
Args:
None
Returns:
Smart studio status
"""
return self.send_query("STAT?")
def start_simulation(self):
""" Starting the simulation of the network model.
simulation model or simulation parameter file
should be set before starting the simulation
Args:
None
Returns:
None
"""
time_to_wait = SMARTSTUDIO_SIMULATION_START_WAIT_TIME
sleep_interval = 2
waiting_time = 0
self.send_command("START", SMARTSTUDIO_SIMULATION_START_WAIT_TIME)
self.log.info("Waiting for CALLSTAT=POWEROFF")
callstat = self.send_query("CALLSTAT? BTS1").split(",")
while callstat[0] != "POWEROFF":
time.sleep(sleep_interval)
waiting_time += sleep_interval
if waiting_time <= time_to_wait:
callstat = self.send_query("CALLSTAT? BTS1").split(",")
else:
raise AnritsuError("Timeout: Starting simulation")
def stop_simulation(self):
""" Stop simulation operation
Args:
None
Returns:
None
"""
# Stop virtual network (IMS) #1 if still running
# this is needed before Sync command is supported in 6.40a
if self.send_query("IMSVNSTAT? 1") == "RUNNING":
self.send_command("IMSSTOPVN 1")
if self.send_query("IMSVNSTAT? 2") == "RUNNING":
self.send_command("IMSSTOPVN 2")
stat = self.send_query("STAT?")
# Stop simulation if its is RUNNING
if stat == "RUNNING":
self.send_command("STOP", 60)
stat = self.send_query("STAT?")
if stat != "NOTRUN":
self.log.info("Failed to stop simulation")
raise AnritsuError("Failed to stop simulation")
def reset(self):
""" reset simulation parameters
Args:
None
Returns:
None
"""
self.send_command("*RST", COMMAND_COMPLETE_WAIT_TIME)
def load_simulation_paramfile(self, filepath):
""" loads simulation model parameter file
Args:
filepath : simulation model parameter file path
Returns:
None
"""
self.stop_simulation()
cmd = "LOADSIMPARAM \"" + filepath + '\";ERROR?'
self.send_query(cmd, LOAD_SIMULATION_PARAM_FILE_WAIT_TIME)
def load_cell_paramfile(self, filepath):
""" loads cell model parameter file
Args:
filepath : cell model parameter file path
Returns:
None
"""
self.stop_simulation()
cmd = "LOADCELLPARAM \"" + filepath + '\";ERROR?'
status = int(self.send_query(cmd))
if status != NO_ERROR:
raise AnritsuError(status, cmd)
def _set_simulation_model(self, sim_model, reset=True):
""" Set simulation model and valid the configuration
Args:
sim_model: simulation model
reset: if True, reset the simulation after setting the new
simulation model
Returns:
True/False
"""
error = int(
self.send_query("SIMMODEL %s;ERROR?" % sim_model,
COMMAND_COMPLETE_WAIT_TIME))
if error: # Try again if first set SIMMODEL fails
time.sleep(3)
if "WLAN" in sim_model:
new_sim_model = sim_model[:-5]
error = int(
self.send_query("SIMMODEL %s;ERROR?" % new_sim_model,
COMMAND_COMPLETE_WAIT_TIME))
time.sleep(3)
error = int(
self.send_query("SIMMODEL %s;ERROR?" % sim_model,
COMMAND_COMPLETE_WAIT_TIME))
if error:
return False
if reset:
# Reset might be necessary because SIMMODEL will load
# some of the contents from previous parameter files.
self.reset()
return True
def set_simulation_model(self, *bts_rats, reset=True):
""" Stops the simulation and then sets the simulation model.
Args:
*bts_rats: base station rats for BTS 1 to 5.
reset: if True, reset the simulation after setting the new
simulation model
Returns:
True or False
"""
self.stop_simulation()
if len(bts_rats) not in range(1, 6):
raise ValueError(
"set_simulation_model requires 1 to 5 BTS values.")
simmodel = ",".join(bts_rat.value for bts_rat in bts_rats)
if self._wlan:
simmodel = simmodel + "," + "WLAN"
return self._set_simulation_model(simmodel, reset)
def get_simulation_model(self):
""" Gets the simulation model
Args:
None
Returns:
Current simulation model
"""
cmd = "SIMMODEL?"
return self.send_query(cmd)
def get_lte_rrc_status_change(self):
""" Gets the LTE RRC status change function state
Returns:
Boolean: True is Enabled / False is Disabled
"""
cmd = "L_RRCSTAT?"
return self.send_query(cmd) == "ENABLE"
def set_lte_rrc_status_change(self, status_change):
""" Enables or Disables the LTE RRC status change function
Returns:
None
"""
cmd = "L_RRCSTAT "
if status_change:
cmd += "ENABLE"
else:
cmd += "DISABLE"
self.send_command(cmd)
def get_lte_rrc_status_change_timer(self):
""" Gets the LTE RRC Status Change Timer
Returns:
returns a status change timer integer value
"""
cmd = "L_STATTMR?"
return self.send_query(cmd)
def set_lte_rrc_status_change_timer(self, time):
""" Sets the LTE RRC Status Change Timer parameter
Returns:
None
"""
cmd = "L_STATTMR %s" % time
self.send_command(cmd)
def set_umts_rrc_status_change(self, status_change):
""" Enables or Disables the UMTS RRC status change function
Returns:
None
"""
cmd = "W_RRCSTAT "
if status_change:
cmd += "ENABLE"
else:
cmd += "DISABLE"
self.send_command(cmd)
def get_umts_rrc_status_change(self):
""" Gets the UMTS RRC Status Change
Returns:
Boolean: True is Enabled / False is Disabled
"""
cmd = "W_RRCSTAT?"
return self.send_query(cmd)
def set_umts_dch_stat_timer(self, timer_seconds):
""" Sets the UMTS RRC DCH timer
Returns:
None
"""
cmd = "W_STATTMRDCH %s" % timer_seconds
self.send_command(cmd)
def set_simulation_state_to_poweroff(self):
""" Sets the simulation state to POWER OFF
Args:
None
Returns:
None
"""
self.send_command("RESETSIMULATION POWEROFF")
time_to_wait = 30
sleep_interval = 2
waiting_time = 0
self.log.info("Waiting for CALLSTAT=POWEROFF")
callstat = self.send_query("CALLSTAT?").split(",")
while callstat[0] != "POWEROFF":
time.sleep(sleep_interval)
waiting_time = waiting_time + sleep_interval
if waiting_time <= time_to_wait:
callstat = self.send_query("CALLSTAT?").split(",")
else:
break
def set_simulation_state_to_idle(self, btsnumber):
""" Sets the simulation state to IDLE
Args:
None
Returns:
None
"""
if not isinstance(btsnumber, BtsNumber):
raise ValueError(' The parameter should be of type "BtsNumber" ')
cmd = "RESETSIMULATION IDLE," + btsnumber.value
self.send_command(cmd)
time_to_wait = 30
sleep_interval = 2
waiting_time = 0
self.log.info("Waiting for CALLSTAT=IDLE")
callstat = self.send_query("CALLSTAT?").split(",")
while callstat[0] != "IDLE":
time.sleep(sleep_interval)
waiting_time = waiting_time + sleep_interval
if waiting_time <= time_to_wait:
callstat = self.send_query("CALLSTAT?").split(",")
else:
break
def set_trigger_message_mode(self, msg_id):
""" Sets the Message Mode of the trigger
Args:
msg_id: The hex value of the identity of an RRC/NAS message.
Returns:
None
"""
if isinstance(msg_id, TriggerMessageIDs):
msg_id = msg_id.value
cmd = "TMMESSAGEMODE {},USERDATA".format(msg_id)
self.send_command(cmd)
def set_data_of_trigger_message(self, msg_id, user_data):
""" Sets the User Data of the trigger message
Args:
msg_id: The hex value of the identity of an RRC/NAS message.
user_data: Hex data
Returns:
None
"""
if isinstance(msg_id, TriggerMessageIDs):
msg_id = msg_id.value
data_len = len(user_data) * 4
cmd = "TMUSERDATA {}, {}, {}".format(msg_id, user_data, data_len)
self.send_command(cmd)
def send_trigger_message(self, msg_id):
""" Sends the User Data of the trigger information
Args:
msg_id: The hex value of the identity of an RRC/NAS message.
Returns:
None
"""
if isinstance(msg_id, TriggerMessageIDs):
msg_id = msg_id.value
cmd = "TMSENDUSERMSG {}".format(msg_id)
self.send_command(cmd)
def wait_for_registration_state(self,
bts=1,
time_to_wait=REGISTRATION_STATE_WAIT_TIME):
""" Waits for UE registration state on Anritsu
Args:
bts: index of MD8475A BTS, eg 1, 2
time_to_wait: time to wait for the phone to get to registration state
Returns:
None
"""
self.log.info("wait for IDLE/COMMUNICATION state on anritsu.")
sleep_interval = 1
sim_model = (self.get_simulation_model()).split(",")
# wait 1 more round for GSM because of PS attach
registration_check_iterations = 2 if sim_model[bts - 1] == "GSM" else 1
for _ in range(registration_check_iterations):
waiting_time = 0
while waiting_time <= time_to_wait:
callstat = self.send_query(
"CALLSTAT? BTS{}".format(bts)).split(",")
if callstat[0] == "IDLE" or callstat[1] == "COMMUNICATION":
break
time.sleep(sleep_interval)
waiting_time += sleep_interval
else:
raise AnritsuError(
"UE failed to register in {} seconds".format(time_to_wait))
time.sleep(sleep_interval)
def wait_for_communication_state(
self, time_to_wait=COMMUNICATION_STATE_WAIT_TIME):
""" Waits for UE communication state on Anritsu
Args:
time_to_wait: time to wait for the phone to get to communication state
Returns:
None
"""
self.log.info("wait for COMMUNICATION state on anritsu")
sleep_interval = 1
waiting_time = 0
self.log.info("Waiting for CALLSTAT=COMMUNICATION")
callstat = self.send_query("CALLSTAT? BTS1").split(",")
while callstat[1] != "COMMUNICATION":
time.sleep(sleep_interval)
waiting_time += sleep_interval
if waiting_time <= time_to_wait:
callstat = self.send_query("CALLSTAT? BTS1").split(",")
else:
raise AnritsuError("UE failed to register on network")
def wait_for_idle_state(self, time_to_wait=IDLE_STATE_WAIT_TIME):
""" Waits for UE idle state on Anritsu
Args:
time_to_wait: time to wait for the phone to get to idle state
Returns:
None
"""
self.log.info("wait for IDLE state on anritsu.")
sleep_interval = 1
waiting_time = 0
callstat = self.send_query("CALLSTAT? BTS1").split(",")
while callstat[0] != "IDLE":
time.sleep(sleep_interval)
waiting_time += sleep_interval
if waiting_time <= time_to_wait:
callstat = self.send_query("CALLSTAT? BTS1").split(",")
else:
raise AnritsuError("UE failed to go on idle state")
def get_camping_cell(self):
""" Gets the current camping cell information
Args:
None
Returns:
returns a tuple (BTS number, RAT Technology) '
"""
bts_number, rat_info = self.send_query("CAMPINGCELL?").split(",")
return bts_number, rat_info
def get_supported_bands(self, rat):
""" Gets the supported bands from UE capability information
Args:
rat: LTE or WCDMA
Returns:
returns a list of bnads
"""
cmd = "UEINFO? "
if rat == "LTE":
cmd += "L"
elif rat == "WCDMA":
cmd += "W"
else:
raise ValueError('The rat argument needs to be "LTE" or "WCDMA"')
cmd += "_SupportedBand"
result = self.send_query(cmd).split(",")
if result == "NONE":
return None
if rat == "WCDMA":
bands = []
for band in result:
bands.append(WCDMA_BANDS[band])
return bands
else:
return result
def start_testcase(self):
""" Starts a test case on Anritsu
Args:
None
Returns:
None
"""
self.send_command("STARTTEST")
def get_testcase_status(self):
""" Gets the current test case status on Anritsu
Args:
None
Returns:
current test case status
"""
return self.send_query("TESTSTAT?")
def start_ip_traffic(self, pdn='1'):
""" Starts IP data traffic with the selected PDN.
Args:
pdn: the pdn to be used for data traffic. Defaults to '1'.
"""
self.send_command('OPERATEIPTRAFFIC START,' + pdn)
def stop_ip_traffic(self, pdn='1'):
""" Stops IP data traffic with the selected PDN.
Args:
pdn: pdn for which data traffic has to be stopped. Defaults to '1'.
"""
self.send_command('OPERATEIPTRAFFIC STOP,' + pdn)
def set_carrier_aggregation_enabled(self, enabled=True):
""" Enables or disables de carrier aggregation option.
Args:
enabled: enables CA if True and disables CA if False.
"""
cmd = 'CA ' + 'ENABLE' if enabled else 'DISABLE'
self.send_command(cmd)
# Common Default Gateway:
@property
def gateway_ipv4addr(self):
""" Gets the IPv4 address of the default gateway
Args:
None
Returns:
current UE status
"""
return self.send_query("DGIPV4?")
@gateway_ipv4addr.setter
def gateway_ipv4addr(self, ipv4_addr):
""" sets the IPv4 address of the default gateway
Args:
ipv4_addr: IPv4 address of the default gateway
Returns:
None
"""
cmd = "DGIPV4 " + ipv4_addr
self.send_command(cmd)
@property
def gateway_ipv6addr(self):
""" Gets the IPv6 address of the default gateway
Args:
None
Returns:
current UE status
"""
return self.send_query("DGIPV6?")
@gateway_ipv6addr.setter
def gateway_ipv6addr(self, ipv6_addr):
""" sets the IPv6 address of the default gateway
Args:
ipv6_addr: IPv6 address of the default gateway
Returns:
None
"""
cmd = "DGIPV6 " + ipv6_addr
self.send_command(cmd)
@property
def usim_key(self):
""" Gets the USIM Security Key
Args:
None
Returns:
USIM Security Key
"""
return self.send_query("USIMK?")
@usim_key.setter
def usim_key(self, usimk):
""" sets the USIM Security Key
Args:
usimk: USIM Security Key, eg "000102030405060708090A0B0C0D0E0F"
Returns:
None
"""
cmd = "USIMK " + usimk
self.send_command(cmd)
def get_ue_status(self):
""" Gets the current UE status on Anritsu
Args:
None
Returns:
current UE status
"""
UE_STATUS_INDEX = 0
ue_status = self.send_query("CALLSTAT?").split(",")[UE_STATUS_INDEX]
return _PROCESS_STATES[ue_status]
def get_packet_status(self):
""" Gets the current Packet status on Anritsu
Args:
None
Returns:
current Packet status
"""
PACKET_STATUS_INDEX = 1
packet_status = self.send_query("CALLSTAT?").split(
",")[PACKET_STATUS_INDEX]
return _PROCESS_STATES[packet_status]
def disconnect(self):
""" Disconnect the Anritsu box from test PC
Args:
None
Returns:
None
"""
# no need to # exit smart studio application
# self.close_smartstudio()
self._sock.close()
def machine_reboot(self):
""" Reboots the Anritsu Machine
Args:
None
Returns:
None
"""
self.send_command("REBOOT")
def save_sequence_log(self, fileName):
""" Saves the Anritsu Sequence logs to file
Args:
fileName: log file name
Returns:
None
"""
cmd = 'SAVESEQLOG "{}"'.format(fileName)
self.send_command(cmd)
def clear_sequence_log(self):
""" Clears the Anritsu Sequence logs
Args:
None
Returns:
None
"""
self.send_command("CLEARSEQLOG")
def save_message_log(self, fileName):
""" Saves the Anritsu Message logs to file
Args:
fileName: log file name
Returns:
None
"""
cmd = 'SAVEMSGLOG "{}"'.format(fileName)
self.send_command(cmd)
def clear_message_log(self):
""" Clears the Anritsu Message logs
Args:
None
Returns:
None
"""
self.send_command("CLEARMSGLOG")
def save_trace_log(self, fileName, fileType, overwrite, start, end):
""" Saves the Anritsu Trace logs
Args:
fileName: log file name
fileType: file type (BINARY, TEXT, H245,PACKET, CPLABE)
overwrite: whether to over write
start: starting trace number
end: ending trace number
Returns:
None
"""
cmd = 'SAVETRACELOG "{}",{},{},{},{}'.format(fileName, fileType,
overwrite, start, end)
self.send_command(cmd)
def send_cmas_lte_wcdma(self, serialNo, messageID, warningMessage):
""" Sends a CMAS message
Args:
serialNo: serial number of CMAS message
messageID: CMAS message ID
warningMessage: CMAS Warning message
Returns:
None
"""
cmd = ('PWSSENDWM 3GPP,"BtsNo=1&WarningSystem=CMAS&SerialNo={}'
'&MessageID={}&wm={}"').format(serialNo, messageID,
warningMessage)
self.send_command(cmd)
def send_etws_lte_wcdma(self, serialNo, messageID, warningType,
warningMessage, userAlertenable, popUpEnable):
""" Sends a ETWS message
Args:
serialNo: serial number of CMAS message
messageID: CMAS message ID
warningMessage: CMAS Warning message
Returns:
None
"""
cmd = (
'PWSSENDWM 3GPP,"BtsNo=1&WarningSystem=ETWS&SerialNo={}&'
'Primary=ON&PrimaryMessageID={}&Secondary=ON&SecondaryMessageID={}'
'&WarningType={}&wm={}&UserAlert={}&Popup={}&dcs=0x10&LanguageCode=en"'
).format(serialNo, messageID, messageID, warningType, warningMessage,
userAlertenable, popUpEnable)
self.send_command(cmd)
def send_cmas_etws_cdma1x(self, message_id, service_category, alert_ext,
response_type, severity, urgency, certainty):
""" Sends a CMAS/ETWS message on CDMA 1X
Args:
serviceCategory: service category of alert
messageID: message ID
alertText: Warning message
Returns:
None
"""
cmd = (
'PWSSENDWM 3GPP2,"BtsNo=1&ServiceCategory={}&MessageID={}&AlertText={}&'
'CharSet=ASCII&ResponseType={}&Severity={}&Urgency={}&Certainty={}"'
).format(service_category, message_id, alert_ext, response_type,
severity, urgency, certainty)
self.send_command(cmd)
@property
def csfb_type(self):
""" Gets the current CSFB type
Args:
None
Returns:
current CSFB type
"""
return self.send_query("SIMMODELEX? CSFB")
@csfb_type.setter
def csfb_type(self, csfb_type):
""" sets the CSFB type
Args:
csfb_type: CSFB type
Returns:
None
"""
if not isinstance(csfb_type, CsfbType):
raise ValueError('The parameter should be of type "CsfbType" ')
cmd = "SIMMODELEX CSFB," + csfb_type.value
self.send_command(cmd)
@property
def csfb_return_to_eutran(self):
""" Gets the current return to EUTRAN status
Args:
None
Returns:
current return to EUTRAN status
"""
return self.send_query("SIMMODELEX? RETEUTRAN")
@csfb_return_to_eutran.setter
def csfb_return_to_eutran(self, enable):
""" sets the return to EUTRAN feature
Args:
enable: enable/disable return to EUTRAN feature
Returns:
None
"""
if not isinstance(enable, ReturnToEUTRAN):
raise ValueError(
'The parameter should be of type "ReturnToEUTRAN"')
cmd = "SIMMODELEX RETEUTRAN," + enable.value
self.send_command(cmd)
def set_packet_preservation(self):
""" Set packet state to Preservation
Args:
None
Returns:
None
"""
cmd = "OPERATEPACKET PRESERVATION"
self.send_command(cmd)
def set_packet_dormant(self):
""" Set packet state to Dormant
Args:
None
Returns:
None
"""
cmd = "OPERATEPACKET DORMANT"
self.send_command(cmd)
def get_ue_identity(self, identity_type):
""" Get the UE identity IMSI, IMEI, IMEISV
Args:
identity_type : IMSI/IMEI/IMEISV
Returns:
IMSI/IMEI/IMEISV value
"""
bts, rat = self.get_camping_cell()
if rat == BtsTechnology.LTE.value:
identity_request = TriggerMessageIDs.IDENTITY_REQUEST_LTE.value
if identity_type == UEIdentityType.IMSI:
userdata = IMSI_READ_USERDATA_LTE
elif identity_type == UEIdentityType.IMEI:
userdata = IMEI_READ_USERDATA_LTE
elif identity_type == UEIdentityType.IMEISV:
userdata = IMEISV_READ_USERDATA_LTE
else:
return None
elif rat == BtsTechnology.WCDMA.value:
identity_request = TriggerMessageIDs.IDENTITY_REQUEST_WCDMA.value
if identity_type == UEIdentityType.IMSI:
userdata = IMSI_READ_USERDATA_WCDMA
elif identity_type == UEIdentityType.IMEI:
userdata = IMEI_READ_USERDATA_WCDMA
elif identity_type == UEIdentityType.IMEISV:
userdata = IMEISV_READ_USERDATA_WCDMA
else:
return None
elif rat == BtsTechnology.GSM.value:
identity_request = TriggerMessageIDs.IDENTITY_REQUEST_GSM.value
if identity_type == UEIdentityType.IMSI:
userdata = IMSI_READ_USERDATA_GSM
elif identity_type == UEIdentityType.IMEI:
userdata = IMEI_READ_USERDATA_GSM
elif identity_type == UEIdentityType.IMEISV:
userdata = IMEISV_READ_USERDATA_GSM
else:
return None
else:
return None
self.send_command("TMMESSAGEMODE {},USERDATA".format(identity_request))
time.sleep(SETTLING_TIME)
self.send_command("TMUSERDATA {}, {}, {}".format(
identity_request, userdata, IDENTITY_REQ_DATA_LEN))
time.sleep(SETTLING_TIME)
self.send_command("TMSENDUSERMSG {}".format(identity_request))
time.sleep(WAIT_TIME_IDENTITY_RESPONSE)
# Go through sequence log and find the identity response message
target = '"{}"'.format(identity_type.value)
seqlog = self.send_query("SEQLOG?").split(",")
while (target not in seqlog):
index = int(seqlog[0]) - 1
if index < SEQ_LOG_MESSAGE_START_INDEX:
self.log.error("Can not find " + target)
return None
seqlog = self.send_query("SEQLOG? %d" % index).split(",")
return (seqlog[-1])
def trigger_ue_capability_enquiry(self, requested_bands):
""" Triggers LTE RRC UE capability enquiry from callbox.
Args:
requested_bands: User data in hex format
"""
self.set_trigger_message_mode(TriggerMessageIDs.UE_CAPABILITY_ENQUIRY)
time.sleep(SETTLING_TIME)
self.set_data_of_trigger_message(
TriggerMessageIDs.UE_CAPABILITY_ENQUIRY, requested_bands)
time.sleep(SETTLING_TIME)
self.send_trigger_message(TriggerMessageIDs.UE_CAPABILITY_ENQUIRY)
time.sleep(SETTLING_TIME)
def get_measured_pusch_power(self):
""" Queries the PUSCH power.
Returns:
A string indicating PUSCH power in each input port.
"""
return self.send_query("MONITOR? UL_PUSCH")
def select_usim(self, usim):
""" Select pre-defined Anritsu USIM models
Args:
usim: any of P0035Bx, P0135Ax, P0250Ax, P0260Ax
Returns:
None
"""
cmd = "SELECTUSIM {}".format(usim)
self.send_command(cmd)
class _AnritsuTestCases(object):
'''Class to interact with the MD8475 supported test procedures '''
def __init__(self, anritsu):
self._anritsu = anritsu
self.log = anritsu.log
@property
def procedure(self):
""" Gets the current Test Procedure type
Args:
None
Returns:
One of TestProcedure type values
"""
return self._anritsu.send_query("TESTPROCEDURE?")
@procedure.setter
def procedure(self, procedure):
""" sets the Test Procedure type
Args:
procedure: One of TestProcedure type values
Returns:
None
"""
if not isinstance(procedure, TestProcedure):
raise ValueError(
'The parameter should be of type "TestProcedure" ')
cmd = "TESTPROCEDURE " + procedure.value
self._anritsu.send_command(cmd)
@property
def bts_direction(self):
""" Gets the current Test direction
Args:
None
Returns:
Current Test direction eg:BTS2,BTS1
"""
return self._anritsu.send_query("TESTBTSDIRECTION?")
@bts_direction.setter
def bts_direction(self, direction):
""" sets the Test direction eg: BTS1 to BTS2 '''
Args:
direction: tuple (from-bts,to_bts) of type BtsNumber
Returns:
None
"""
if not isinstance(direction, tuple) or len(direction) != 2:
raise ValueError("Pass a tuple with two items")
from_bts, to_bts = direction
if (isinstance(from_bts, BtsNumber) and isinstance(to_bts, BtsNumber)):
cmd = "TESTBTSDIRECTION {},{}".format(from_bts.value, to_bts.value)
self._anritsu.send_command(cmd)
else:
raise ValueError(' The parameters should be of type "BtsNumber" ')
@property
def registration_timeout(self):
""" Gets the current Test registration timeout
Args:
None
Returns:
Current test registration timeout value
"""
return self._anritsu.send_query("TESTREGISTRATIONTIMEOUT?")
@registration_timeout.setter
def registration_timeout(self, timeout_value):
""" sets the Test registration timeout value
Args:
timeout_value: test registration timeout value
Returns:
None
"""
cmd = "TESTREGISTRATIONTIMEOUT " + str(timeout_value)
self._anritsu.send_command(cmd)
@property
def power_control(self):
""" Gets the power control enabled/disabled status for test case
Args:
None
Returns:
current power control enabled/disabled status
"""
return self._anritsu.send_query("TESTPOWERCONTROL?")
@power_control.setter
def power_control(self, enable):
""" Sets the power control enabled/disabled status for test case
Args:
enable: enabled/disabled
Returns:
None
"""
if not isinstance(enable, TestPowerControl):
raise ValueError(' The parameter should be of type'
' "TestPowerControl" ')
cmd = "TESTPOWERCONTROL " + enable.value
self._anritsu.send_command(cmd)
@property
def measurement_LTE(self):
""" Checks measurement status for LTE test case
Args:
None
Returns:
Enabled/Disabled
"""
return self._anritsu.send_query("TESTMEASUREMENT? LTE")
@measurement_LTE.setter
def measurement_LTE(self, enable):
""" Sets the measurement enabled/disabled status for LTE test case
Args:
enable: enabled/disabled
Returns:
None
"""
if not isinstance(enable, TestMeasurement):
raise ValueError(' The parameter should be of type'
' "TestMeasurement" ')
cmd = "TESTMEASUREMENT LTE," + enable.value
self._anritsu.send_command(cmd)
@property
def measurement_WCDMA(self):
""" Checks measurement status for WCDMA test case
Args:
None
Returns:
Enabled/Disabled
"""
return self._anritsu.send_query("TESTMEASUREMENT? WCDMA")
@measurement_WCDMA.setter
def measurement_WCDMA(self, enable):
""" Sets the measurement enabled/disabled status for WCDMA test case
Args:
enable: enabled/disabled
Returns:
None
"""
if not isinstance(enable, TestMeasurement):
raise ValueError(' The parameter should be of type'
' "TestMeasurement" ')
cmd = "TESTMEASUREMENT WCDMA," + enable.value
self._anritsu.send_command(cmd)
@property
def measurement_TDSCDMA(self):
""" Checks measurement status for TDSCDMA test case
Args:
None
Returns:
Enabled/Disabled
"""
return self._anritsu.send_query("TESTMEASUREMENT? TDSCDMA")
@measurement_TDSCDMA.setter
def measurement_WCDMA(self, enable):
""" Sets the measurement enabled/disabled status for TDSCDMA test case
Args:
enable: enabled/disabled
Returns:
None
"""
if not isinstance(enable, TestMeasurement):
raise ValueError(' The parameter should be of type'
' "TestMeasurement" ')
cmd = "TESTMEASUREMENT TDSCDMA," + enable.value
self._anritsu.send_command(cmd)
def set_pdn_targeteps(self, pdn_order, pdn_number=1):
""" Sets PDN to connect as a target when performing the
test case for packet handover
Args:
pdn_order: PRIORITY/USER
pdn_number: Target PDN number
Returns:
None
"""
cmd = "TESTPDNTARGETEPS " + pdn_order
if pdn_order == "USER":
cmd = cmd + "," + str(pdn_number)
self._anritsu.send_command(cmd)
class _BaseTransceiverStation(object):
'''Class to interact different BTS supported by MD8475 '''
def __init__(self, anritsu, btsnumber):
if not isinstance(btsnumber, BtsNumber):
raise ValueError(' The parameter should be of type "BtsNumber" ')
self._bts_number = btsnumber.value
self._anritsu = anritsu
self.log = anritsu.log
@property
def output_level(self):
""" Gets the Downlink power of the cell
Args:
None
Returns:
DL Power level
"""
cmd = "OLVL? " + self._bts_number
return self._anritsu.send_query(cmd)
@output_level.setter
def output_level(self, level):
""" Sets the Downlink power of the cell
Args:
level: Power level
Returns:
None
"""
counter = 1
while float(level) != float(self.output_level):
if counter > 3:
raise AnritsuError("Fail to set output level in 3 tries!")
cmd = "OLVL {},{}".format(level, self._bts_number)
self._anritsu.send_command(cmd)
counter += 1
time.sleep(1)
@property
def input_level(self):
""" Gets the reference power of the cell
Args:
None
Returns:
Reference Power level
"""
cmd = "RFLVL? " + self._bts_number
return self._anritsu.send_query(cmd)
@input_level.setter
def input_level(self, level):
""" Sets the reference power of the cell
Args:
level: Power level
Returns:
None
"""
counter = 1
while float(level) != float(self.input_level):
if counter > 3:
raise AnritsuError("Fail to set intput level in 3 tries!")
cmd = "RFLVL {},{}".format(level, self._bts_number)
self._anritsu.send_command(cmd)
counter += 1
time.sleep(1)
@property
def band(self):
""" Gets the Band of the cell
Args:
None
Returns:
Cell band
"""
cmd = "BAND? " + self._bts_number
return self._anritsu.send_query(cmd)
@band.setter
def band(self, band):
""" Sets the Band of the cell
Args:
band: Band of the cell
Returns:
None
"""
cmd = "BAND {},{}".format(band, self._bts_number)
self._anritsu.send_command(cmd)
@property
def transmode(self):
""" Gets the Transmission Mode of the cell
Args:
None
Returns:
Transmission mode
"""
cmd = "TRANSMODE? " + self._bts_number
return self._anritsu.send_query(cmd)
@transmode.setter
def transmode(self, tm_mode):
""" Sets the TM of the cell
Args:
TM: TM of the cell
Returns:
None
"""
cmd = "TRANSMODE {},{}".format(tm_mode, self._bts_number)
self._anritsu.send_command(cmd)
@property
def duplex_mode(self):
""" Gets the Duplex Mode of the cell
Args:
None
Returns:
Duplex mode
"""
cmd = "DUPLEXMODE? " + self._bts_number
return self._anritsu.send_query(cmd)
@duplex_mode.setter
def duplex_mode(self, mode):
""" Sets the duplex mode for the cell
Args:
mode: string indicating FDD or TDD
Returns:
None
"""
cmd = "DUPLEXMODE {},{}".format(mode, self._bts_number)
self._anritsu.send_command(cmd)
@property
def uldl_configuration(self):
""" Gets the UL/DL pattern configuration for TDD bands
Args:
None
Returns:
Configuration number
"""
cmd = "ULDLCONFIGURATION? " + self._bts_number
return self._anritsu.send_query(cmd)
@uldl_configuration.setter
def uldl_configuration(self, configuration):
""" Sets the UL/DL pattern configuration for TDD bands
Args:
configuration: configuration number, [ 0, 6 ] inclusive
Returns:
None
Raises:
ValueError: Frame structure has to be [ 0, 6 ] inclusive
"""
if configuration not in range(0, 7):
raise ValueError("The frame structure configuration has to be a "
"number between 0 and 6 inclusive")
cmd = "ULDLCONFIGURATION {},{}".format(configuration, self._bts_number)
self._anritsu.send_command(cmd)
@property
def cfi(self):
""" Gets the Control Format Indicator for this base station.
Args:
None
Returns:
The CFI number.
"""
cmd = "CFI? " + self._bts_number
return self._anritsu.send_query(cmd)
@cfi.setter
def cfi(self, cfi):
""" Sets the Control Format Indicator for this base station.
Args:
cfi: one of BESTEFFORT, AUTO, 1, 2 or 3.
Returns:
None
Raises:
ValueError: if cfi's value is invalid
"""
cfi = str(cfi)
valid_values = {'BESTEFFORT', 'AUTO', '1', '2', '3'}
if cfi not in valid_values:
raise ValueError('Valid values for CFI are %r' % valid_values)
cmd = "CFI {},{}".format(cfi, self._bts_number)
self._anritsu.send_command(cmd)
@property
def paging_duration(self):
""" Gets the paging cycle duration for this base station.
Args:
None
Returns:
The paging cycle duration in milliseconds.
"""
cmd = "PCYCLE? " + self._bts_number
return self._anritsu.send_query(cmd)
@paging_duration.setter
def paging_duration(self, duration):
""" Sets the paging cycle duration for this base station.
Args:
duration: the paging cycle duration in milliseconds.
Returns:
None
Raises:
ValueError: if duration's value is invalid
"""
duration = int(duration)
valid_values = {320, 640, 1280, 2560}
if duration not in valid_values:
raise ValueError('Valid values for the paging cycle duration are '
'%r.' % valid_values)
cmd = "PCYCLE {},{}".format(duration, self._bts_number)
self._anritsu.send_command(cmd)
@property
def phich_resource(self):
""" Gets the PHICH Resource setting for this base station.
Args:
None
Returns:
The PHICH Resource setting.
"""
cmd = "PHICHRESOURCE? " + self._bts_number
return self._anritsu.send_query(cmd)
@phich_resource.setter
def phich_resource(self, phich):
""" Sets the PHICH Resource setting for this base station.
Args:
phich: one of 1/6, 1/2, 1, 2.
Returns:
None
Raises:
ValueError: if phich's value is invalid
"""
phich = str(phich)
valid_values = ['1/6', '1/2', '1', '2']
if phich not in valid_values:
raise ValueError('Valid values for PHICH Resource are %r' %
valid_values)
cmd = "PHICHRESOURCE {},{}".format(phich, self._bts_number)
self._anritsu.send_command(cmd)
@property
def tdd_special_subframe(self):
""" Gets SPECIALSUBFRAME of cell.
Args:
None
Returns:
tdd_special_subframe: integer between 0,9 inclusive
"""
cmd = "SPECIALSUBFRAME? " + self._bts_number
tdd_special_subframe = int(self._anritsu.send_query(cmd))
return tdd_special_subframe
@tdd_special_subframe.setter
def tdd_special_subframe(self, tdd_special_subframe):
""" Sets SPECIALSUBFRAME of cell.
Args:
tdd_special_subframe: int between 0,9 inclusive
Returns:
None
Raises:
ValueError: tdd_special_subframe has to be between 0,9 inclusive
"""
if tdd_special_subframe not in range(0, 10):
raise ValueError("The special subframe config is not [0,9]")
cmd = "SPECIALSUBFRAME {},{}".format(tdd_special_subframe,
self._bts_number)
self._anritsu.send_command(cmd)
@property
def dl_antenna(self):
""" Gets the DL ANTENNA count of the cell
Args:
None
Returns:
No of DL Antenna
"""
cmd = "ANTENNAS? " + self._bts_number
return self._anritsu.send_query(cmd)
@dl_antenna.setter
def dl_antenna(self, num_antenna):
""" Sets the DL ANTENNA of the cell
Args:
c: DL ANTENNA of the cell
Returns:
None
"""
cmd = "ANTENNAS {},{}".format(num_antenna, self._bts_number)
self._anritsu.send_command(cmd)
@property
def bandwidth(self):
""" Gets the channel bandwidth of the cell
Args:
None
Returns:
channel bandwidth
"""
cmd = "BANDWIDTH? " + self._bts_number
return self._anritsu.send_query(cmd)
@bandwidth.setter
def bandwidth(self, bandwidth):
""" Sets the channel bandwidth of the cell
Args:
bandwidth: channel bandwidth of the cell
Returns:
None
"""
if not isinstance(bandwidth, BtsBandwidth):
raise ValueError(' The parameter should be of type "BtsBandwidth"')
cmd = "BANDWIDTH {},{}".format(bandwidth.value, self._bts_number)
self._anritsu.send_command(cmd)
@property
def dl_bandwidth(self):
""" Gets the downlink bandwidth of the cell
Args:
None
Returns:
downlink bandwidth
"""
cmd = "DLBANDWIDTH? " + self._bts_number
return self._anritsu.send_query(cmd)
@dl_bandwidth.setter
def dl_bandwidth(self, bandwidth):
""" Sets the downlink bandwidth of the cell
Args:
bandwidth: downlink bandwidth of the cell
Returns:
None
"""
if not isinstance(bandwidth, BtsBandwidth):
raise ValueError(' The parameter should be of type "BtsBandwidth"')
cmd = "DLBANDWIDTH {},{}".format(bandwidth.value, self._bts_number)
self._anritsu.send_command(cmd)
@property
def ul_bandwidth(self):
""" Gets the uplink bandwidth of the cell
Args:
None
Returns:
uplink bandwidth
"""
cmd = "ULBANDWIDTH? " + self._bts_number
return self._anritsu.send_query(cmd)
@ul_bandwidth.setter
def ul_bandwidth(self, bandwidth):
""" Sets the uplink bandwidth of the cell
Args:
bandwidth: uplink bandwidth of the cell
Returns:
None
"""
if not isinstance(bandwidth, BtsBandwidth):
raise ValueError(
' The parameter should be of type "BtsBandwidth" ')
cmd = "ULBANDWIDTH {},{}".format(bandwidth.value, self._bts_number)
self._anritsu.send_command(cmd)
@property
def packet_rate(self):
""" Gets the packet rate of the cell
Args:
None
Returns:
packet rate
"""
cmd = "PACKETRATE? " + self._bts_number
return self._anritsu.send_query(cmd)
@packet_rate.setter
def packet_rate(self, packetrate):
""" Sets the packet rate of the cell
Args:
packetrate: packet rate of the cell
Returns:
None
"""
if not isinstance(packetrate, BtsPacketRate):
raise ValueError(' The parameter should be of type'
' "BtsPacketRate" ')
cmd = "PACKETRATE {},{}".format(packetrate.value, self._bts_number)
self._anritsu.send_command(cmd)
@property
def ul_windowsize(self):
""" Gets the uplink window size of the cell
Args:
None
Returns:
uplink window size
"""
cmd = "ULWINSIZE? " + self._bts_number
return self._anritsu.send_query(cmd)
@ul_windowsize.setter
def ul_windowsize(self, windowsize):
""" Sets the uplink window size of the cell
Args:
windowsize: uplink window size of the cell
Returns:
None
"""
if not isinstance(windowsize, BtsPacketWindowSize):
raise ValueError(' The parameter should be of type'
' "BtsPacketWindowSize" ')
cmd = "ULWINSIZE {},{}".format(windowsize.value, self._bts_number)
self._anritsu.send_command(cmd)
@property
def dl_windowsize(self):
""" Gets the downlink window size of the cell
Args:
None
Returns:
downlink window size
"""
cmd = "DLWINSIZE? " + self._bts_number
return self._anritsu.send_query(cmd)
@dl_windowsize.setter
def dl_windowsize(self, windowsize):
""" Sets the downlink window size of the cell
Args:
windowsize: downlink window size of the cell
Returns:
None
"""
if not isinstance(windowsize, BtsPacketWindowSize):
raise ValueError(' The parameter should be of type'
' "BtsPacketWindowSize" ')
cmd = "DLWINSIZE {},{}".format(windowsize.value, self._bts_number)
self._anritsu.send_command(cmd)
@property
def service_state(self):
""" Gets the service state of BTS
Args:
None
Returns:
service state IN/OUT
"""
cmd = "OUTOFSERVICE? " + self._bts_number
return self._anritsu.send_query(cmd)
@service_state.setter
def service_state(self, service_state):
""" Sets the service state of BTS
Args:
service_state: service state of BTS , IN/OUT
Returns:
None
"""
if not isinstance(service_state, BtsServiceState):
raise ValueError(' The parameter should be of type'
' "BtsServiceState" ')
cmd = "OUTOFSERVICE {},{}".format(service_state.value,
self._bts_number)
self._anritsu.send_command(cmd)
@property
def cell_barred(self):
""" Gets the Cell Barred state of the cell
Args:
None
Returns:
one of BtsCellBarred value
"""
cmd = "CELLBARRED?" + self._bts_number
return self._anritsu.send_query(cmd)
@cell_barred.setter
def cell_barred(self, barred_option):
""" Sets the Cell Barred state of the cell
Args:
barred_option: Cell Barred state of the cell
Returns:
None
"""
if not isinstance(barred_option, BtsCellBarred):
raise ValueError(' The parameter should be of type'
' "BtsCellBarred" ')
cmd = "CELLBARRED {},{}".format(barred_option.value, self._bts_number)
self._anritsu.send_command(cmd)
@property
def accessclass_barred(self):
""" Gets the Access Class Barred state of the cell
Args:
None
Returns:
one of BtsAccessClassBarred value
"""
cmd = "ACBARRED? " + self._bts_number
return self._anritsu.send_query(cmd)
@accessclass_barred.setter
def accessclass_barred(self, barred_option):
""" Sets the Access Class Barred state of the cell
Args:
barred_option: Access Class Barred state of the cell
Returns:
None
"""
if not isinstance(barred_option, BtsAccessClassBarred):
raise ValueError(' The parameter should be of type'
' "BtsAccessClassBarred" ')
cmd = "ACBARRED {},{}".format(barred_option.value, self._bts_number)
self._anritsu.send_command(cmd)
@property
def lteemergency_ac_barred(self):
""" Gets the LTE emergency Access Class Barred state of the cell
Args:
None
Returns:
one of BtsLteEmergencyAccessClassBarred value
"""
cmd = "LTEEMERGENCYACBARRED? " + self._bts_number
return self._anritsu.send_query(cmd)
@lteemergency_ac_barred.setter
def lteemergency_ac_barred(self, barred_option):
""" Sets the LTE emergency Access Class Barred state of the cell
Args:
barred_option: Access Class Barred state of the cell
Returns:
None
"""
if not isinstance(barred_option, BtsLteEmergencyAccessClassBarred):
raise ValueError(' The parameter should be of type'
' "BtsLteEmergencyAccessClassBarred" ')
cmd = "LTEEMERGENCYACBARRED {},{}".format(barred_option.value,
self._bts_number)
self._anritsu.send_command(cmd)
@property
def mcc(self):
""" Gets the MCC of the cell
Args:
None
Returns:
MCC of the cell
"""
cmd = "MCC? " + self._bts_number
return self._anritsu.send_query(cmd)
@mcc.setter
def mcc(self, mcc_code):
""" Sets the MCC of the cell
Args:
mcc_code: MCC of the cell
Returns:
None
"""
cmd = "MCC {},{}".format(mcc_code, self._bts_number)
self._anritsu.send_command(cmd)
@property
def mnc(self):
""" Gets the MNC of the cell
Args:
None
Returns:
MNC of the cell
"""
cmd = "MNC? " + self._bts_number
return self._anritsu.send_query(cmd)
@mnc.setter
def mnc(self, mnc_code):
""" Sets the MNC of the cell
Args:
mnc_code: MNC of the cell
Returns:
None
"""
cmd = "MNC {},{}".format(mnc_code, self._bts_number)
self._anritsu.send_command(cmd)
@property
def nw_fullname_enable(self):
""" Gets the network full name enable status
Args:
None
Returns:
one of BtsNwNameEnable value
"""
cmd = "NWFNAMEON? " + self._bts_number
return self._anritsu.send_query(cmd)
@nw_fullname_enable.setter
def nw_fullname_enable(self, enable):
""" Sets the network full name enable status
Args:
enable: network full name enable status
Returns:
None
"""
if not isinstance(enable, BtsNwNameEnable):
raise ValueError(' The parameter should be of type'
' "BtsNwNameEnable" ')
cmd = "NWFNAMEON {},{}".format(enable.value, self._bts_number)
self._anritsu.send_command(cmd)
@property
def nw_fullname(self):
""" Gets the network full name
Args:
None
Returns:
Network fulll name
"""
cmd = "NWFNAME? " + self._bts_number
return self._anritsu.send_query(cmd)
@nw_fullname.setter
def nw_fullname(self, fullname):
""" Sets the network full name
Args:
fullname: network full name
Returns:
None
"""
cmd = "NWFNAME {},{}".format(fullname, self._bts_number)
self._anritsu.send_command(cmd)
@property
def nw_shortname_enable(self):
""" Gets the network short name enable status
Args:
None
Returns:
one of BtsNwNameEnable value
"""
cmd = "NWSNAMEON? " + self._bts_number
return self._anritsu.send_query(cmd)
@nw_shortname_enable.setter
def nw_shortname_enable(self, enable):
""" Sets the network short name enable status
Args:
enable: network short name enable status
Returns:
None
"""
if not isinstance(enable, BtsNwNameEnable):
raise ValueError(' The parameter should be of type'
' "BtsNwNameEnable" ')
cmd = "NWSNAMEON {},{}".format(enable.value, self._bts_number)
self._anritsu.send_command(cmd)
@property
def nw_shortname(self):
""" Gets the network short name
Args:
None
Returns:
Network short name
"""
cmd = "NWSNAME? " + self._bts_number
return self._anritsu.send_query(cmd)
@nw_shortname.setter
def nw_shortname(self, shortname):
""" Sets the network short name
Args:
shortname: network short name
Returns:
None
"""
cmd = "NWSNAME {},{}".format(shortname, self._bts_number)
self._anritsu.send_command(cmd)
def apply_parameter_changes(self):
""" apply the parameter changes at run time
Args:
None
Returns:
None
"""
cmd = "APPLYPARAM"
self._anritsu.send_command(cmd)
@property
def wcdma_ctch(self):
""" Gets the WCDMA CTCH enable/disable status
Args:
None
Returns:
one of CTCHSetup values
"""
cmd = "CTCHPARAMSETUP? " + self._bts_number
return self._anritsu.send_query(cmd)
@wcdma_ctch.setter
def wcdma_ctch(self, enable):
""" Sets the WCDMA CTCH enable/disable status
Args:
enable: WCDMA CTCH enable/disable status
Returns:
None
"""
cmd = "CTCHPARAMSETUP {},{}".format(enable.value, self._bts_number)
self._anritsu.send_command(cmd)
@property
def lac(self):
""" Gets the Location Area Code of the cell
Args:
None
Returns:
LAC value
"""
cmd = "LAC? " + self._bts_number
return self._anritsu.send_query(cmd)
@lac.setter
def lac(self, lac):
""" Sets the Location Area Code of the cell
Args:
lac: Location Area Code of the cell
Returns:
None
"""
cmd = "LAC {},{}".format(lac, self._bts_number)
self._anritsu.send_command(cmd)
@property
def rac(self):
""" Gets the Routing Area Code of the cell
Args:
None
Returns:
RAC value
"""
cmd = "RAC? " + self._bts_number
return self._anritsu.send_query(cmd)
@rac.setter
def rac(self, rac):
""" Sets the Routing Area Code of the cell
Args:
rac: Routing Area Code of the cell
Returns:
None
"""
cmd = "RAC {},{}".format(rac, self._bts_number)
self._anritsu.send_command(cmd)
@property
def dl_channel(self):
""" Gets the downlink channel number of the cell
Args:
None
Returns:
RAC value
"""
cmd = "DLCHAN? " + self._bts_number
return self._anritsu.send_query(cmd)
@dl_channel.setter
def dl_channel(self, channel):
""" Sets the downlink channel number of the cell
Args:
channel: downlink channel number of the cell
Returns:
None
"""
cmd = "DLCHAN {},{}".format(channel, self._bts_number)
self._anritsu.send_command(cmd)
@property
def dl_cc_enabled(self):
""" Checks if component carrier is enabled or disabled
Args:
None
Returns:
True if enabled, False if disabled
"""
return (self._anritsu.send_query("TESTDLCC?" +
self._bts_number) == "ENABLE")
@dl_cc_enabled.setter
def dl_cc_enabled(self, enabled):
""" Enables or disables the component carrier
Args:
enabled: True if it should be enabled, False if disabled
Returns:
None
"""
cmd = "TESTDLCC {},{}".format("ENABLE" if enabled else "DISABLE",
self._bts_number)
self._anritsu.send_command(cmd)
@property
def sector1_mcc(self):
""" Gets the sector 1 MCC of the CDMA cell
Args:
None
Returns:
sector 1 mcc
"""
cmd = "S1MCC? " + self._bts_number
return self._anritsu.send_query(cmd)
@sector1_mcc.setter
def sector1_mcc(self, mcc):
""" Sets the sector 1 MCC of the CDMA cell
Args:
mcc: sector 1 MCC of the CDMA cell
Returns:
None
"""
cmd = "S1MCC {},{}".format(mcc, self._bts_number)
self._anritsu.send_command(cmd)
@property
def sector1_sid(self):
""" Gets the sector 1 system ID of the CDMA cell
Args:
None
Returns:
sector 1 system Id
"""
cmd = "S1SID? " + self._bts_number
return self._anritsu.send_query(cmd)
@sector1_sid.setter
def sector1_sid(self, sid):
""" Sets the sector 1 system ID of the CDMA cell
Args:
sid: sector 1 system ID of the CDMA cell
Returns:
None
"""
cmd = "S1SID {},{}".format(sid, self._bts_number)
self._anritsu.send_command(cmd)
@property
def sector1_nid(self):
""" Gets the sector 1 network ID of the CDMA cell
Args:
None
Returns:
sector 1 network Id
"""
cmd = "S1NID? " + self._bts_number
return self._anritsu.send_query(cmd)
@sector1_nid.setter
def sector1_nid(self, nid):
""" Sets the sector 1 network ID of the CDMA cell
Args:
nid: sector 1 network ID of the CDMA cell
Returns:
None
"""
cmd = "S1NID {},{}".format(nid, self._bts_number)
self._anritsu.send_command(cmd)
@property
def sector1_baseid(self):
""" Gets the sector 1 Base ID of the CDMA cell
Args:
None
Returns:
sector 1 Base Id
"""
cmd = "S1BASEID? " + self._bts_number
return self._anritsu.send_query(cmd)
@sector1_baseid.setter
def sector1_baseid(self, baseid):
""" Sets the sector 1 Base ID of the CDMA cell
Args:
baseid: sector 1 Base ID of the CDMA cell
Returns:
None
"""
cmd = "S1BASEID {},{}".format(baseid, self._bts_number)
self._anritsu.send_command(cmd)
@property
def sector1_latitude(self):
""" Gets the sector 1 latitude of the CDMA cell
Args:
None
Returns:
sector 1 latitude
"""
cmd = "S1LATITUDE? " + self._bts_number
return self._anritsu.send_query(cmd)
@sector1_latitude.setter
def sector1_latitude(self, latitude):
""" Sets the sector 1 latitude of the CDMA cell
Args:
latitude: sector 1 latitude of the CDMA cell
Returns:
None
"""
cmd = "S1LATITUDE {},{}".format(latitude, self._bts_number)
self._anritsu.send_command(cmd)
@property
def sector1_longitude(self):
""" Gets the sector 1 longitude of the CDMA cell
Args:
None
Returns:
sector 1 longitude
"""
cmd = "S1LONGITUDE? " + self._bts_number
return self._anritsu.send_query(cmd)
@sector1_longitude.setter
def sector1_longitude(self, longitude):
""" Sets the sector 1 longitude of the CDMA cell
Args:
longitude: sector 1 longitude of the CDMA cell
Returns:
None
"""
cmd = "S1LONGITUDE {},{}".format(longitude, self._bts_number)
self._anritsu.send_command(cmd)
@property
def evdo_sid(self):
""" Gets the Sector ID of the EVDO cell
Args:
None
Returns:
Sector Id
"""
cmd = "S1SECTORID? " + self._bts_number
return self._anritsu.send_query(cmd)
@evdo_sid.setter
def evdo_sid(self, sid):
""" Sets the Sector ID of the EVDO cell
Args:
sid: Sector ID of the EVDO cell
Returns:
None
"""
cmd = "S1SECTORID {},{}".format(sid, self._bts_number)
self._anritsu.send_command(cmd)
@property
def cell_id(self):
""" Gets the cell identity of the cell
Args:
None
Returns:
cell identity
"""
cmd = "CELLID? " + self._bts_number
return self._anritsu.send_query(cmd)
@cell_id.setter
def cell_id(self, cell_id):
""" Sets the cell identity of the cell
Args:
cell_id: cell identity of the cell
Returns:
None
"""
cmd = "CELLID {},{}".format(cell_id, self._bts_number)
self._anritsu.send_command(cmd)
@property
def physical_cellid(self):
""" Gets the physical cell id of the cell
Args:
None
Returns:
physical cell id
"""
cmd = "PHYCELLID? " + self._bts_number
return self._anritsu.send_query(cmd)
@physical_cellid.setter
def physical_cellid(self, physical_cellid):
""" Sets the physical cell id of the cell
Args:
physical_cellid: physical cell id of the cell
Returns:
None
"""
cmd = "PHYCELLID {},{}".format(physical_cellid, self._bts_number)
self._anritsu.send_command(cmd)
@property
def gsm_mcs_dl(self):
""" Gets the Modulation and Coding scheme (DL) of the GSM cell
Args:
None
Returns:
DL MCS
"""
cmd = "DLMCS? " + self._bts_number
return self._anritsu.send_query(cmd)
@gsm_mcs_dl.setter
def gsm_mcs_dl(self, mcs_dl):
""" Sets the Modulation and Coding scheme (DL) of the GSM cell
Args:
mcs_dl: Modulation and Coding scheme (DL) of the GSM cell
Returns:
None
"""
cmd = "DLMCS {},{}".format(mcs_dl, self._bts_number)
self._anritsu.send_command(cmd)
@property
def gsm_mcs_ul(self):
""" Gets the Modulation and Coding scheme (UL) of the GSM cell
Args:
None
Returns:
UL MCS
"""
cmd = "ULMCS? " + self._bts_number
return self._anritsu.send_query(cmd)
@gsm_mcs_ul.setter
def gsm_mcs_ul(self, mcs_ul):
""" Sets the Modulation and Coding scheme (UL) of the GSM cell
Args:
mcs_ul:Modulation and Coding scheme (UL) of the GSM cell
Returns:
None
"""
cmd = "ULMCS {},{}".format(mcs_ul, self._bts_number)
self._anritsu.send_command(cmd)
@property
def lte_scheduling_mode(self):
""" Gets the Scheduling mode of the LTE cell
Args:
None
Returns:
Scheduling mode
"""
cmd = "SCHEDULEMODE? " + self._bts_number
return self._anritsu.send_query(cmd)
@lte_scheduling_mode.setter
def lte_scheduling_mode(self, mode):
""" Sets the Scheduling mode of the LTE cell
Args:
mode: STATIC (default) or DYNAMIC
Returns:
None
"""
counter = 1
while mode != self.lte_scheduling_mode:
if counter > 3:
raise AnritsuError("Fail to set scheduling mode in 3 tries!")
cmd = "SCHEDULEMODE {},{}".format(mode, self._bts_number)
self._anritsu.send_command(cmd)
counter += 1
time.sleep(1)
@property
def tbs_pattern(self):
""" Gets the TBS Pattern setting for the LTE cell
Args:
None
Returns:
TBS Pattern setting
"""
cmd = "TBSPATTERN? " + self._bts_number
return self._anritsu.send_query(cmd)
@tbs_pattern.setter
def tbs_pattern(self, pattern):
""" Sets the TBS Pattern setting for the LTE cell
Args:
mode: "FULLALLOCATION" or "OFF"
Returns:
None
"""
cmd = "TBSPATTERN {}, {}".format(pattern, self._bts_number)
self._anritsu.send_command(cmd)
@property
def drx_connected_mode(self):
""" Gets the Connected DRX LTE cell parameter
Args:
None
Returns:
DRX connected mode (OFF, AUTO, MANUAL)
"""
cmd = "DRXCONN? " + self._bts_number
return self._anritsu.send_query(cmd)
@drx_connected_mode.setter
def drx_connected_mode(self, mode):
""" Sets the Connected DRX LTE cell parameter
Args:
mode: OFF, AUTO, MANUAL
Returns:
None
"""
cmd = "DRXCONN {}, {}".format(mode, self._bts_number)
self._anritsu.send_command(cmd)
@property
def drx_on_duration_timer(self):
""" Gets the amount of PDCCH subframes to wait for data after
waking up from a DRX cycle
Args:
None
Returns:
DRX mode duration timer
"""
cmd = "DRXDURATIONTIME? " + self._bts_number
return self._anritsu.send_query(cmd)
@drx_on_duration_timer.setter
def drx_on_duration_timer(self, time):
""" Sets the amount of PDCCH subframes to wait for data after
waking up from a DRX cycle
Args:
timer: Amount of PDCCH subframes to wait for user data
to be transmitted
Returns:
None
"""
cmd = "DRXDURATIONTIME PSF{}, {}".format(time, self._bts_number)
self._anritsu.send_command(cmd)
@property
def drx_inactivity_timer(self):
""" Gets the number of PDCCH subframes to wait before entering DRX mode
Args:
None
Returns:
DRX mode inactivity timer
"""
cmd = "DRXINACTIVITYTIME? " + self._bts_number
return self._anritsu.send_query(cmd)
@drx_inactivity_timer.setter
def drx_inactivity_timer(self, time):
""" Sets the number of PDCCH subframes to wait before entering DRX mode
Args:
timer: Length of the interval to wait
Returns:
None
"""
cmd = "DRXINACTIVITYTIME PSF{}, {}".format(time, self._bts_number)
self._anritsu.send_command(cmd)
@property
def drx_retransmission_timer(self):
""" Gets the number of consecutive PDCCH subframes to wait
for retransmission
Args:
None
Returns:
Number of PDCCH subframes to wait for retransmission
"""
cmd = "DRXRETRANSTIME? " + self._bts_number
return self._anritsu.send_query(cmd)
@drx_retransmission_timer.setter
def drx_retransmission_timer(self, time):
""" Sets the number of consecutive PDCCH subframes to wait
for retransmission
Args:
time: Number of PDCCH subframes to wait
for retransmission
Returns:
None
"""
cmd = "DRXRETRANSTIME PSF{}, {}".format(time, self._bts_number)
self._anritsu.send_command(cmd)
@property
def drx_long_cycle(self):
""" Gets the amount of subframes representing a DRX long cycle
Args:
None
Returns:
The amount of subframes representing one long DRX cycle.
One cycle consists of DRX sleep + DRX on duration
"""
cmd = "DRXLONGCYCLE? " + self._bts_number
return self._anritsu.send_query(cmd)
@drx_long_cycle.setter
def drx_long_cycle(self, time):
""" Sets the amount of subframes representing a DRX long cycle
Args:
long_cycle: The amount of subframes representing one long DRX cycle.
One cycle consists of DRX sleep + DRX on duration
Returns:
None
"""
cmd = "DRXLONGCYCLE SF{}, {}".format(time, self._bts_number)
self._anritsu.send_command(cmd)
@property
def drx_long_cycle_offset(self):
""" Gets the offset used to determine long cycle starting
subframe
Args:
None
Returns:
Long cycle offset
"""
cmd = "DRXLONGCYCLESTARTOFFSET? " + self._bts_number
return self._anritsu.send_query(cmd)
@drx_long_cycle_offset.setter
def drx_long_cycle_offset(self, offset):
""" Sets the offset used to determine long cycle starting
subframe
Args:
offset: Number in range 0...(long cycle - 1)
"""
cmd = "DRXLONGCYCLESTARTOFFSET {}, {}".format(offset, self._bts_number)
self._anritsu.send_command(cmd)
@property
def lte_mcs_dl(self):
""" Gets the Modulation and Coding scheme (DL) of the LTE cell
Args:
None
Returns:
DL MCS
"""
cmd = "DLIMCS? " + self._bts_number
return self._anritsu.send_query(cmd)
@lte_mcs_dl.setter
def lte_mcs_dl(self, mcs_dl):
""" Sets the Modulation and Coding scheme (DL) of the LTE cell
Args:
mcs_dl: Modulation and Coding scheme (DL) of the LTE cell
Returns:
None
"""
cmd = "DLIMCS {},{}".format(mcs_dl, self._bts_number)
self._anritsu.send_command(cmd)
@property
def lte_mcs_ul(self):
""" Gets the Modulation and Coding scheme (UL) of the LTE cell
Args:
None
Returns:
UL MCS
"""
cmd = "ULIMCS? " + self._bts_number
return self._anritsu.send_query(cmd)
@lte_mcs_ul.setter
def lte_mcs_ul(self, mcs_ul):
""" Sets the Modulation and Coding scheme (UL) of the LTE cell
Args:
mcs_ul: Modulation and Coding scheme (UL) of the LTE cell
Returns:
None
"""
cmd = "ULIMCS {},{}".format(mcs_ul, self._bts_number)
self._anritsu.send_command(cmd)
@property
def lte_dl_modulation_order(self):
""" Gets the DL modulation order of the LTE cell
Args:
None
Returns:
The DL modulation order
"""
cmd = "DLRMC_MOD? " + self._bts_number
return self._anritsu.send_query(cmd)
@lte_dl_modulation_order.setter
def lte_dl_modulation_order(self, order):
""" Sets the DL modulation order of the LTE cell
Args:
order: the DL modulation order of the LTE cell
Returns:
None
"""
if isinstance(order, ModulationType):
order = order.value
cmd = "DLRMC_MOD {},{}".format(order, self._bts_number)
self._anritsu.send_command(cmd)
@property
def lte_ul_modulation_order(self):
""" Gets the UL modulation order of the LTE cell
Args:
None
Returns:
The UL modulation order
"""
cmd = "ULRMC_MOD? " + self._bts_number
return self._anritsu.send_query(cmd)
@lte_ul_modulation_order.setter
def lte_ul_modulation_order(self, order):
""" Sets the UL modulation order of the LTE cell
Args:
order: the UL modulation order of the LTE cell
Returns:
None
"""
if isinstance(order, ModulationType):
order = order.value
cmd = "ULRMC_MOD {},{}".format(order, self._bts_number)
self._anritsu.send_command(cmd)
@property
def nrb_dl(self):
""" Gets the Downlink N Resource Block of the cell
Args:
None
Returns:
Downlink NRB
"""
cmd = "DLNRB? " + self._bts_number
return self._anritsu.send_query(cmd)
@nrb_dl.setter
def nrb_dl(self, blocks):
""" Sets the Downlink N Resource Block of the cell
Args:
blocks: Downlink N Resource Block of the cell
Returns:
None
"""
cmd = "DLNRB {},{}".format(blocks, self._bts_number)
self._anritsu.send_command(cmd)
@property
def nrb_ul(self):
""" Gets the uplink N Resource Block of the cell
Args:
None
Returns:
uplink NRB
"""
cmd = "ULNRB? " + self._bts_number
return self._anritsu.send_query(cmd)
@nrb_ul.setter
def nrb_ul(self, blocks):
""" Sets the uplink N Resource Block of the cell
Args:
blocks: uplink N Resource Block of the cell
Returns:
None
"""
cmd = "ULNRB {},{}".format(blocks, self._bts_number)
self._anritsu.send_command(cmd)
@property
def max_nrb_ul(self):
ul_bandwidth = self.ul_bandwidth
if ul_bandwidth == 'SAMEASDL':
ul_bandwidth = self.dl_bandwidth
max_nrb = MAX_NRB_FOR_BANDWIDTH.get(ul_bandwidth, None)
if not max_nrb:
raise ValueError('Could not get maximum RB allocation'
'for bandwidth: {}'.format(ul_bandwidth))
return max_nrb
@property
def mimo_support(self):
""" Gets the maximum supported MIMO mode for the LTE bases tation.
Returns:
the MIMO mode as a string
"""
cmd = "LTEMIMO? " + self._bts_number
return self._anritsu.send_query(cmd)
@mimo_support.setter
def mimo_support(self, mode):
""" Sets the maximum supported MIMO mode for the LTE base station.
Args:
mode: a string or an object of the LteMimoMode class.
"""
if isinstance(mode, LteMimoMode):
mode = mode.value
cmd = "LTEMIMO {},{}".format(self._bts_number, mode)
self._anritsu.send_command(cmd)
@property
def neighbor_cell_mode(self):
""" Gets the neighbor cell mode
Args:
None
Returns:
current neighbor cell mode
"""
cmd = "NCLIST? " + self._bts_number
return self._anritsu.send_query(cmd)
@neighbor_cell_mode.setter
def neighbor_cell_mode(self, mode):
""" Sets the neighbor cell mode
Args:
mode: neighbor cell mode , DEFAULT/ USERDATA
Returns:
None
"""
cmd = "NCLIST {},{}".format(mode, self._bts_number)
self._anritsu.send_command(cmd)
def get_neighbor_cell_type(self, system, index):
""" Gets the neighbor cell type
Args:
system: simulation model of neighbor cell
LTE, WCDMA, TDSCDMA, GSM, CDMA1X,EVDO
index: Index of neighbor cell
Returns:
neighbor cell type
"""
cmd = "NCTYPE? {},{},{}".format(system, index, self._bts_number)
return self._anritsu.send_query(cmd)
def set_neighbor_cell_type(self, system, index, cell_type):
""" Sets the neighbor cell type
Args:
system: simulation model of neighbor cell
LTE, WCDMA, TDSCDMA, GSM, CDMA1X,EVDO
index: Index of neighbor cell
cell_type: cell type
BTS1, BTS2, BTS3, BTS4,CELLNAME, DISABLE
Returns:
None
"""
cmd = "NCTYPE {},{},{},{}".format(system, index, cell_type,
self._bts_number)
self._anritsu.send_command(cmd)
def get_neighbor_cell_name(self, system, index):
""" Gets the neighbor cell name
Args:
system: simulation model of neighbor cell
LTE, WCDMA, TDSCDMA, GSM, CDMA1X,EVDO
index: Index of neighbor cell
Returns:
neighbor cell name
"""
cmd = "NCCELLNAME? {},{},{}".format(system, index, self._bts_number)
return self._anritsu.send_query(cmd)
def set_neighbor_cell_name(self, system, index, name):
""" Sets the neighbor cell name
Args:
system: simulation model of neighbor cell
LTE, WCDMA, TDSCDMA, GSM, CDMA1X,EVDO
index: Index of neighbor cell
name: cell name
Returns:
None
"""
cmd = "NCCELLNAME {},{},{},{}".format(system, index, name,
self._bts_number)
self._anritsu.send_command(cmd)
def get_neighbor_cell_mcc(self, system, index):
""" Gets the neighbor cell mcc
Args:
system: simulation model of neighbor cell
LTE, WCDMA, TDSCDMA, GSM, CDMA1X,EVDO
index: Index of neighbor cell
Returns:
neighbor cell mcc
"""
cmd = "NCMCC? {},{},{}".format(system, index, self._bts_number)
return self._anritsu.send_query(cmd)
def get_neighbor_cell_mnc(self, system, index):
""" Gets the neighbor cell mnc
Args:
system: simulation model of neighbor cell
LTE, WCDMA, TDSCDMA, GSM, CDMA1X,EVDO
index: Index of neighbor cell
Returns:
neighbor cell mnc
"""
cmd = "NCMNC? {},{},{}".format(system, index, self._bts_number)
return self._anritsu.send_query(cmd)
def get_neighbor_cell_id(self, system, index):
""" Gets the neighbor cell id
Args:
system: simulation model of neighbor cell
LTE, WCDMA, TDSCDMA, GSM, CDMA1X,EVDO
index: Index of neighbor cell
Returns:
neighbor cell id
"""
cmd = "NCCELLID? {},{},{}".format(system, index, self._bts_number)
return self._anritsu.send_query(cmd)
def get_neighbor_cell_tac(self, system, index):
""" Gets the neighbor cell tracking area code
Args:
system: simulation model of neighbor cell
LTE, WCDMA, TDSCDMA, GSM, CDMA1X,EVDO
index: Index of neighbor cell
Returns:
neighbor cell tracking area code
"""
cmd = "NCTAC? {},{},{}".format(system, index, self._bts_number)
return self._anritsu.send_query(cmd)
def get_neighbor_cell_dl_channel(self, system, index):
""" Gets the neighbor cell downlink channel
Args:
system: simulation model of neighbor cell
LTE, WCDMA, TDSCDMA, GSM, CDMA1X,EVDO
index: Index of neighbor cell
Returns:
neighbor cell tracking downlink channel
"""
cmd = "NCDLCHAN? {},{},{}".format(system, index, self._bts_number)
return self._anritsu.send_query(cmd)
def get_neighbor_cell_dl_bandwidth(self, system, index):
""" Gets the neighbor cell downlink bandwidth
Args:
system: simulation model of neighbor cell
LTE, WCDMA, TDSCDMA, GSM, CDMA1X,EVDO
index: Index of neighbor cell
Returns:
neighbor cell tracking downlink bandwidth
"""
cmd = "NCDLBANDWIDTH {},{},{}".format(system, index, self._bts_number)
return self._anritsu.send_query(cmd)
def get_neighbor_cell_pcid(self, system, index):
""" Gets the neighbor cell physical cell id
Args:
system: simulation model of neighbor cell
LTE, WCDMA, TDSCDMA, GSM, CDMA1X,EVDO
index: Index of neighbor cell
Returns:
neighbor cell physical cell id
"""
cmd = "NCPHYCELLID {},{},{}".format(system, index, self._bts_number)
return self._anritsu.send_query(cmd)
def get_neighbor_cell_lac(self, system, index):
""" Gets the neighbor cell location area code
Args:
system: simulation model of neighbor cell
LTE, WCDMA, TDSCDMA, GSM, CDMA1X,EVDO
index: Index of neighbor cell
Returns:
neighbor cell location area code
"""
cmd = "NCLAC {},{},{}".format(system, index, self._bts_number)
return self._anritsu.send_query(cmd)
def get_neighbor_cell_rac(self, system, index):
""" Gets the neighbor cell routing area code
Args:
system: simulation model of neighbor cell
LTE, WCDMA, TDSCDMA, GSM, CDMA1X,EVDO
index: Index of neighbor cell
Returns:
neighbor cell routing area code
"""
cmd = "NCRAC {},{},{}".format(system, index, self._bts_number)
return self._anritsu.send_query(cmd)
@property
def primary_scrambling_code(self):
""" Gets the primary scrambling code for WCDMA cell
Args:
None
Returns:
primary scrambling code
"""
cmd = "PRISCRCODE? " + self._bts_number
return self._anritsu.send_query(cmd)
@primary_scrambling_code.setter
def primary_scrambling_code(self, psc):
""" Sets the primary scrambling code for WCDMA cell
Args:
psc: primary scrambling code
Returns:
None
"""
cmd = "PRISCRCODE {},{}".format(psc, self._bts_number)
self._anritsu.send_command(cmd)
@property
def tac(self):
""" Gets the Tracking Area Code of the LTE cell
Args:
None
Returns:
Tracking Area Code of the LTE cell
"""
cmd = "TAC? " + self._bts_number
return self._anritsu.send_query(cmd)
@tac.setter
def tac(self, tac):
""" Sets the Tracking Area Code of the LTE cell
Args:
tac: Tracking Area Code of the LTE cell
Returns:
None
"""
cmd = "TAC {},{}".format(tac, self._bts_number)
self._anritsu.send_command(cmd)
@property
def cell(self):
""" Gets the current cell for BTS
Args:
None
Returns:
current cell for BTS
"""
cmd = "CELLSEL? {}".format(self._bts_number)
return self._anritsu.send_query(cmd)
@cell.setter
def cell(self, cell_name):
""" sets the cell for BTS
Args:
cell_name: cell name
Returns:
None
"""
cmd = "CELLSEL {},{}".format(self._bts_number, cell_name)
return self._anritsu.send_command(cmd)
@property
def gsm_cbch(self):
""" Gets the GSM CBCH enable/disable status
Args:
None
Returns:
one of CBCHSetup values
"""
cmd = "CBCHPARAMSETUP? " + self._bts_number
return self._anritsu.send_query(cmd)
@gsm_cbch.setter
def gsm_cbch(self, enable):
""" Sets the GSM CBCH enable/disable status
Args:
enable: GSM CBCH enable/disable status
Returns:
None
"""
cmd = "CBCHPARAMSETUP {},{}".format(enable.value, self._bts_number)
self._anritsu.send_command(cmd)
@property
def gsm_gprs_mode(self):
""" Gets the GSM connection mode
Args:
None
Returns:
A string indicating if connection is EGPRS, GPRS or non-GPRS
"""
cmd = "GPRS? " + self._bts_number
return self._anritsu.send_query(cmd)
@gsm_gprs_mode.setter
def gsm_gprs_mode(self, mode):
""" Sets the GPRS connection mode
Args:
mode: GPRS connection mode
Returns:
None
"""
if not isinstance(mode, BtsGprsMode):
raise ValueError(' The parameter should be of type "BtsGprsMode"')
cmd = "GPRS {},{}".format(mode.value, self._bts_number)
self._anritsu.send_command(cmd)
@property
def gsm_slots(self):
""" Gets the GSM slot assignment
Args:
None
Returns:
A tuple indicating DL and UL slots.
"""
cmd = "MLTSLTCFG? " + self._bts_number
response = self._anritsu.send_query(cmd)
split_response = response.split(',')
if not len(split_response) == 2:
raise ValueError(response)
return response[0], response[1]
@gsm_slots.setter
def gsm_slots(self, slots):
""" Sets the number of downlink / uplink slots for GSM
Args:
slots: a tuple containing two ints indicating (DL,UL)
Returns:
None
"""
try:
dl, ul = slots
dl = int(dl)
ul = int(ul)
except:
raise ValueError(
'The parameter slot has to be a tuple containing two ints '
'indicating (dl,ul) slots.')
# Validate
if dl < 1 or ul < 1 or dl + ul > 5:
raise ValueError(
'DL and UL slots have to be >= 1 and the sum <= 5.')
cmd = "MLTSLTCFG {},{},{}".format(dl, ul, self._bts_number)
self._anritsu.send_command(cmd)
class _VirtualPhone(object):
'''Class to interact with virtual phone supported by MD8475 '''
def __init__(self, anritsu):
self._anritsu = anritsu
self.log = anritsu.log
@property
def id(self):
""" Gets the virtual phone ID
Args:
None
Returns:
virtual phone ID
"""
cmd = "VPID? "
return self._anritsu.send_query(cmd)
@id.setter
def id(self, phonenumber):
""" Sets the virtual phone ID
Args:
phonenumber: virtual phone ID
Returns:
None
"""
cmd = "VPID {}".format(phonenumber)
self._anritsu.send_command(cmd)
@property
def id_c2k(self):
""" Gets the virtual phone ID for CDMA 1x
Args:
None
Returns:
virtual phone ID
"""
cmd = "VPIDC2K? "
return self._anritsu.send_query(cmd)
@id_c2k.setter
def id_c2k(self, phonenumber):
""" Sets the virtual phone ID for CDMA 1x
Args:
phonenumber: virtual phone ID
Returns:
None
"""
cmd = "VPIDC2K {}".format(phonenumber)
self._anritsu.send_command(cmd)
@property
def auto_answer(self):
""" Gets the auto answer status of virtual phone
Args:
None
Returns:
auto answer status, ON/OFF
"""
cmd = "VPAUTOANSWER? "
return self._anritsu.send_query(cmd)
@auto_answer.setter
def auto_answer(self, option):
""" Sets the auto answer feature
Args:
option: tuple with two items for turning on Auto Answer
(OFF or (ON, timetowait))
Returns:
None
"""
enable = "OFF"
time = 5
try:
enable, time = option
except ValueError:
if enable != "OFF":
raise ValueError("Pass a tuple with two items for"
" Turning on Auto Answer")
cmd = "VPAUTOANSWER {},{}".format(enable.value, time)
self._anritsu.send_command(cmd)
@property
def calling_mode(self):
""" Gets the calling mode of virtual phone
Args:
None
Returns:
calling mode of virtual phone
"""
cmd = "VPCALLINGMODE? "
return self._anritsu.send_query(cmd)
@calling_mode.setter
def calling_mode(self, calling_mode):
""" Sets the calling mode of virtual phone
Args:
calling_mode: calling mode of virtual phone
Returns:
None
"""
cmd = "VPCALLINGMODE {}".format(calling_mode)
self._anritsu.send_command(cmd)
def set_voice_off_hook(self):
""" Set the virtual phone operating mode to Voice Off Hook
Args:
None
Returns:
None
"""
cmd = "OPERATEVPHONE 0"
return self._anritsu.send_command(cmd)
def set_voice_on_hook(self):
""" Set the virtual phone operating mode to Voice On Hook
Args:
None
Returns:
None
"""
cmd = "OPERATEVPHONE 1"
return self._anritsu.send_command(cmd)
def set_video_off_hook(self):
""" Set the virtual phone operating mode to Video Off Hook
Args:
None
Returns:
None
"""
cmd = "OPERATEVPHONE 2"
return self._anritsu.send_command(cmd)
def set_video_on_hook(self):
""" Set the virtual phone operating mode to Video On Hook
Args:
None
Returns:
None
"""
cmd = "OPERATEVPHONE 3"
return self._anritsu.send_command(cmd)
def set_call_waiting(self):
""" Set the virtual phone operating mode to Call waiting
Args:
None
Returns:
None
"""
cmd = "OPERATEVPHONE 4"
return self._anritsu.send_command(cmd)
@property
def status(self):
""" Gets the virtual phone status
Args:
None
Returns:
virtual phone status
"""
cmd = "VPSTAT?"
status = self._anritsu.send_query(cmd)
return _VP_STATUS[status]
def sendSms(self, phoneNumber, message):
""" Sends the SMS data from Anritsu to UE
Args:
phoneNumber: sender of SMS
message: message text
Returns:
None
"""
cmd = ("SENDSMS /?PhoneNumber=001122334455&Sender={}&Text={}"
"&DCS=00").format(phoneNumber, AnritsuUtils.gsm_encode(message))
return self._anritsu.send_command(cmd)
def sendSms_c2k(self, phoneNumber, message):
""" Sends the SMS data from Anritsu to UE (in CDMA)
Args:
phoneNumber: sender of SMS
message: message text
Returns:
None
"""
cmd = ("C2KSENDSMS System=CDMA\&Originating_Address={}\&UserData={}"
).format(phoneNumber, AnritsuUtils.cdma_encode(message))
return self._anritsu.send_command(cmd)
def receiveSms(self):
""" Receives SMS messages sent by the UE in an external application
Args:
None
Returns:
None
"""
return self._anritsu.send_query("RECEIVESMS?")
def receiveSms_c2k(self):
""" Receives SMS messages sent by the UE(in CDMA) in an external application
Args:
None
Returns:
None
"""
return self._anritsu.send_query("C2KRECEIVESMS?")
def setSmsStatusReport(self, status):
""" Set the Status Report value of the SMS
Args:
status: status code
Returns:
None
"""
cmd = "SMSSTATUSREPORT {}".format(status)
return self._anritsu.send_command(cmd)
class _PacketDataNetwork(object):
'''Class to configure PDN parameters'''
def __init__(self, anritsu, pdnnumber):
self._pdn_number = pdnnumber
self._anritsu = anritsu
self.log = anritsu.log
# Default Gateway Selection
@property
def pdn_DG_selection(self):
""" Gets the default gateway for the PDN
Args:
None
Returns:
Current UE status
"""
cmd = "PDNDEFAULTGATEWAY? " + self._pdn_number
return self._anritsu.send_query(cmd)
@pdn_DG_selection.setter
def pdn_DG_selection(self, selection):
""" Sets the default gateway selection for the PDN
Args:
Selection: COMMON or USER
Returns:
None
"""
cmd = "PDNDEFAULTGATEWAY {},{}".format(self._pdn_number, selection)
self._anritsu.send_command(cmd)
# PDN specific Default Gateway:
@property
def pdn_gateway_ipv4addr(self):
""" Gets the IPv4 address of the default gateway
Args:
None
Returns:
current UE status
"""
cmd = "PDNDGIPV4? " + self._pdn_number
return self._anritsu.send_query(cmd)
@pdn_gateway_ipv4addr.setter
def pdn_gateway_ipv4addr(self, ipv4_addr):
""" sets the IPv4 address of the default gateway
Args:
ipv4_addr: IPv4 address of the default gateway
Returns:
None
"""
cmd = "PDNDGIPV4 {},{}".format(self._pdn_number, ipv4_addr)
self._anritsu.send_command(cmd)
@property
def pdn_gateway_ipv6addr(self):
""" Gets the IPv6 address of the default gateway
Args:
None
Returns:
current UE status
"""
cmd = "PDNDGIPV6? " + self._pdn_number
return self._anritsu.send_query(cmd)
@pdn_gateway_ipv6addr.setter
def pdn_gateway_ipv6addr(self, ipv6_addr):
""" sets the IPv6 address of the default gateway
Args:
ipv6_addr: IPv6 address of the default gateway
Returns:
None
"""
cmd = "PDNDGIPV6 {},{}".format(self._pdn_number, ipv6_addr)
self._anritsu.send_command(cmd)
@property
def ue_address_iptype(self):
""" Gets IP type of UE for particular PDN
Args:
None
Returns:
IP type of UE for particular PDN
"""
cmd = "PDNIPTYPE? " + self._pdn_number
return self._anritsu.send_query(cmd)
@ue_address_iptype.setter
def ue_address_iptype(self, ip_type):
""" Set IP type of UE for particular PDN
Args:
ip_type: IP type of UE
Returns:
None
"""
if not isinstance(ip_type, IPAddressType):
raise ValueError(
' The parameter should be of type "IPAddressType"')
cmd = "PDNIPTYPE {},{}".format(self._pdn_number, ip_type.value)
self._anritsu.send_command(cmd)
@property
def ue_address_ipv4(self):
""" Gets UE IPv4 address
Args:
None
Returns:
UE IPv4 address
"""
cmd = "PDNIPV4? " + self._pdn_number
return self._anritsu.send_query(cmd)
@ue_address_ipv4.setter
def ue_address_ipv4(self, ip_address):
""" Set UE IPv4 address
Args:
ip_address: UE IPv4 address
Returns:
None
"""
cmd = "PDNIPV4 {},{}".format(self._pdn_number, ip_address)
self._anritsu.send_command(cmd)
@property
def ue_address_ipv6(self):
""" Gets UE IPv6 address
Args:
None
Returns:
UE IPv6 address
"""
cmd = "PDNIPV6? " + self._pdn_number
return self._anritsu.send_query(cmd)
@ue_address_ipv6.setter
def ue_address_ipv6(self, ip_address):
""" Set UE IPv6 address
Args:
ip_address: UE IPv6 address
Returns:
None
"""
cmd = "PDNIPV6 {},{}".format(self._pdn_number, ip_address)
self._anritsu.send_command(cmd)
@property
def primary_dns_address_ipv4(self):
""" Gets Primary DNS server IPv4 address
Args:
None
Returns:
Primary DNS server IPv4 address
"""
cmd = "PDNDNSIPV4PRI? " + self._pdn_number
return self._anritsu.send_query(cmd)
@primary_dns_address_ipv4.setter
def primary_dns_address_ipv4(self, ip_address):
""" Set Primary DNS server IPv4 address
Args:
ip_address: Primary DNS server IPv4 address
Returns:
None
"""
cmd = "PDNDNSIPV4PRI {},{}".format(self._pdn_number, ip_address)
self._anritsu.send_command(cmd)
@property
def secondary_dns_address_ipv4(self):
""" Gets secondary DNS server IPv4 address
Args:
None
Returns:
secondary DNS server IPv4 address
"""
cmd = "PDNDNSIPV4SEC? " + self._pdn_number
return self._anritsu.send_query(cmd)
@secondary_dns_address_ipv4.setter
def secondary_dns_address_ipv4(self, ip_address):
""" Set secondary DNS server IPv4 address
Args:
ip_address: secondary DNS server IPv4 address
Returns:
None
"""
cmd = "PDNDNSIPV4SEC {},{}".format(self._pdn_number, ip_address)
self._anritsu.send_command(cmd)
@property
def dns_address_ipv6(self):
""" Gets DNS server IPv6 address
Args:
None
Returns:
DNS server IPv6 address
"""
cmd = "PDNDNSIPV6? " + self._pdn_number
return self._anritsu.send_query(cmd)
@dns_address_ipv6.setter
def dns_address_ipv6(self, ip_address):
""" Set DNS server IPv6 address
Args:
ip_address: DNS server IPv6 address
Returns:
None
"""
cmd = "PDNDNSIPV6 {},{}".format(self._pdn_number, ip_address)
self._anritsu.send_command(cmd)
@property
def cscf_address_ipv4(self):
""" Gets Secondary P-CSCF IPv4 address
Args:
None
Returns:
Secondary P-CSCF IPv4 address
"""
cmd = "PDNPCSCFIPV4? " + self._pdn_number
return self._anritsu.send_query(cmd)
@cscf_address_ipv4.setter
def cscf_address_ipv4(self, ip_address):
""" Set Secondary P-CSCF IPv4 address
Args:
ip_address: Secondary P-CSCF IPv4 address
Returns:
None
"""
cmd = "PDNPCSCFIPV4 {},{}".format(self._pdn_number, ip_address)
self._anritsu.send_command(cmd)
@property
def cscf_address_ipv6(self):
""" Gets P-CSCF IPv6 address
Args:
None
Returns:
P-CSCF IPv6 address
"""
cmd = "PDNPCSCFIPV6? " + self._pdn_number
return self._anritsu.send_query(cmd)
@cscf_address_ipv6.setter
def cscf_address_ipv6(self, ip_address):
""" Set P-CSCF IPv6 address
Args:
ip_address: P-CSCF IPv6 address
Returns:
None
"""
cmd = "PDNPCSCFIPV6 {},{}".format(self._pdn_number, ip_address)
self._anritsu.send_command(cmd)
@property
def pdn_ims(self):
""" Get PDN IMS VNID binding status
Args:
None
Returns:
PDN IMS VNID binding status
"""
cmd = "PDNIMS? " + self._pdn_number
return self._anritsu.send_query(cmd)
@pdn_ims.setter
def pdn_ims(self, switch):
""" Set PDN IMS VNID binding Enable/Disable
Args:
switch: "ENABLE/DISABLE"
Returns:
None
"""
if not isinstance(switch, Switch):
raise ValueError(' The parameter should be of type'
' "Switch", ie, ENABLE or DISABLE ')
cmd = "PDNIMS {},{}".format(self._pdn_number, switch.value)
self._anritsu.send_command(cmd)
@property
def pdn_vnid(self):
""" Get PDN IMS VNID
Args:
None
Returns:
PDN IMS VNID
"""
cmd = "PDNVNID? " + self._pdn_number
return self._anritsu.send_query(cmd)
@pdn_vnid.setter
def pdn_vnid(self, vnid):
""" Set PDN IMS VNID
Args:
vnid: 1~99
Returns:
None
"""
cmd = "PDNVNID {},{}".format(self._pdn_number, vnid)
self._anritsu.send_command(cmd)
@property
def pdn_apn_name(self):
""" Get PDN APN NAME
Args:
None
Returns:
PDN APN NAME
"""
cmd = "PDNCHECKAPN? " + self._pdn_number
return self._anritsu.send_query(cmd)
@pdn_apn_name.setter
def pdn_apn_name(self, name):
""" Set PDN APN NAME
Args:
name: fast.t-mobile.com, ims
Returns:
None
"""
cmd = "PDNCHECKAPN {},{}".format(self._pdn_number, name)
self._anritsu.send_command(cmd)
@property
def pdn_qci(self):
""" Get PDN QCI Value
Args:
None
Returns:
PDN QCI Value
"""
cmd = "PDNQCIDEFAULT? " + self._pdn_number
return self._anritsu.send_query(cmd)
@pdn_qci.setter
def pdn_qci(self, qci_value):
""" Set PDN QCI Value
Args:
qci_value: 5, 9
Returns:
None
"""
cmd = "PDNQCIDEFAULT {},{}".format(self._pdn_number, qci_value)
self._anritsu.send_command(cmd)
class _TriggerMessage(object):
'''Class to interact with trigger message handling supported by MD8475 '''
def __init__(self, anritsu):
self._anritsu = anritsu
self.log = anritsu.log
def set_reply_type(self, message_id, reply_type):
""" Sets the reply type of the trigger information
Args:
message_id: trigger information message Id
reply_type: reply type of the trigger information
Returns:
None
"""
if not isinstance(message_id, TriggerMessageIDs):
raise ValueError(' The parameter should be of type'
' "TriggerMessageIDs"')
if not isinstance(reply_type, TriggerMessageReply):
raise ValueError(' The parameter should be of type'
' "TriggerMessageReply"')
cmd = "REJECTTYPE {},{}".format(message_id.value, reply_type.value)
self._anritsu.send_command(cmd)
def set_reject_cause(self, message_id, cause):
""" Sets the reject cause of the trigger information
Args:
message_id: trigger information message Id
cause: cause for reject
Returns:
None
"""
if not isinstance(message_id, TriggerMessageIDs):
raise ValueError(' The parameter should be of type'
' "TriggerMessageIDs"')
cmd = "REJECTCAUSE {},{}".format(message_id.value, cause)
self._anritsu.send_command(cmd)
class _IMS_Services(object):
'''Class to configure and operate IMS Services'''
def __init__(self, anritsu, vnid):
self._vnid = vnid
self._anritsu = anritsu
self.log = anritsu.log
@property
def sync(self):
""" Gets Sync Enable status
Args:
None
Returns:
VNID Sync Enable status
"""
cmd = "IMSSYNCENABLE? " + self._vnid
return self._anritsu.send_query(cmd)
@sync.setter
def sync(self, switch):
""" Set Sync Enable or Disable
Args:
sync: ENABLE/DISABLE
Returns:
None
"""
if not isinstance(switch, Switch):
raise ValueError(' The parameter should be of type "Switch"')
cmd = "IMSSYNCENABLE {},{}".format(self._vnid, switch.value)
self._anritsu.send_command(cmd)
@property
def cscf_address_ipv4(self):
""" Gets CSCF IPv4 address
Args:
None
Returns:
CSCF IPv4 address
"""
cmd = "IMSCSCFIPV4? " + self._vnid
return self._anritsu.send_query(cmd)
@cscf_address_ipv4.setter
def cscf_address_ipv4(self, ip_address):
""" Set CSCF IPv4 address
Args:
ip_address: CSCF IPv4 address
Returns:
None
"""
cmd = "IMSCSCFIPV4 {},{}".format(self._vnid, ip_address)
self._anritsu.send_command(cmd)
@property
def cscf_address_ipv6(self):
""" Gets CSCF IPv6 address
Args:
None
Returns:
CSCF IPv6 address
"""
cmd = "IMSCSCFIPV6? " + self._vnid
return self._anritsu.send_query(cmd)
@cscf_address_ipv6.setter
def cscf_address_ipv6(self, ip_address):
""" Set CSCF IPv6 address
Args:
ip_address: CSCF IPv6 address
Returns:
None
"""
cmd = "IMSCSCFIPV6 {},{}".format(self._vnid, ip_address)
self._anritsu.send_command(cmd)
@property
def imscscf_iptype(self):
""" Gets CSCF IP Type
Args:
None
Returns:
CSCF IP Type
"""
cmd = "IMSCSCFIPTYPE? " + self._vnid
return self._anritsu.send_query(cmd)
@imscscf_iptype.setter
def imscscf_iptype(self, iptype):
""" Set CSCF IP Type
Args:
iptype: IPV4, IPV6, IPV4V6
Returns:
None
"""
cmd = "IMSCSCFIPTYPE {},{}".format(self._vnid, iptype)
self._anritsu.send_command(cmd)
@property
def cscf_monitoring_ua(self):
""" Get CSCF Monitoring UA URI
Args:
None
Returns:
CSCF Monitoring UA URI
"""
cmd = "IMSCSCFUAURI? " + self._vnid
return self._anritsu.send_query(cmd)
@cscf_monitoring_ua.setter
def cscf_monitoring_ua(self, ua_uri):
""" Set CSCF Monitoring UA URI
Args:
ua_uri: CSCF Monitoring UA URI
Returns:
None
"""
cmd = "IMSCSCFUAURI {},{}".format(self._vnid, ua_uri)
self._anritsu.send_command(cmd)
@property
def cscf_host_name(self):
""" Get CSCF Host Name
Args:
None
Returns:
CSCF Host Name
"""
cmd = "IMSCSCFNAME? " + self._vnid
return self._anritsu.send_query(cmd)
@cscf_host_name.setter
def cscf_host_name(self, host_name):
""" Set CSCF Host Name
Args:
host_name: CSCF Host Name
Returns:
None
"""
cmd = "IMSCSCFNAME {},{}".format(self._vnid, host_name)
self._anritsu.send_command(cmd)
@property
def cscf_ims_authentication(self):
""" Get CSCF IMS Auth Value
Args:
None
Returns:
CSCF IMS Auth
"""
cmd = "IMSCSCFAUTH? " + self._vnid
return self._anritsu.send_query(cmd)
@cscf_ims_authentication.setter
def cscf_ims_authentication(self, on_off):
""" Set CSCF IMS Auth Value
Args:
on_off: CSCF IMS Auth ENABLE/DISABLE
Returns:
None
"""
cmd = "IMSCSCFAUTH {},{}".format(self._vnid, on_off)
self._anritsu.send_command(cmd)
@property
def cscf_precondition(self):
""" Get CSCF IMS Precondition
Args:
None
Returns:
CSCF IMS Precondition
"""
cmd = "IMSCSCFPRECONDITION? " + self._vnid
return self._anritsu.send_query(cmd)
@cscf_precondition.setter
def cscf_precondition(self, on_off):
""" Set CSCF IMS Precondition
Args:
on_off: CSCF IMS Precondition ENABLE/DISABLE
Returns:
None
"""
cmd = "IMSCSCFPRECONDITION {},{}".format(self._vnid, on_off)
self._anritsu.send_command(cmd)
@property
def cscf_virtual_ua(self):
""" Get CSCF Virtual UA URI
Args:
None
Returns:
CSCF Virtual UA URI
"""
cmd = "IMSCSCFVUAURI? " + self._vnid
return self._anritsu.send_query(cmd)
@cscf_virtual_ua.setter
def cscf_virtual_ua(self, ua_uri):
""" Set CSCF Virtual UA URI
Args:
ua_uri: CSCF Virtual UA URI
Returns:
None
"""
cmd = "IMSCSCFVUAURI {},{}".format(self._vnid, ua_uri)
self._anritsu.send_command(cmd)
@property
def tmo_cscf_userslist_add(self):
""" Get CSCF USERLIST
Args:
None
Returns:
CSCF USERLIST
"""
cmd = "IMSCSCFUSERSLIST? " + self._vnid
return self._anritsu.send_query(cmd)
@tmo_cscf_userslist_add.setter
def tmo_cscf_userslist_add(self, username):
""" Set CSCF USER to USERLIST
This is needed if IMS AUTH is enabled
Args:
username: CSCF Username
Returns:
None
"""
cmd = "IMSCSCFUSERSLISTADD {},{},00112233445566778899AABBCCDDEEFF,TS34108,AKAV1_MD5,\
OPC,00000000000000000000000000000000,8000,TRUE,FALSE,0123456789ABCDEF0123456789ABCDEF,\
54CDFEAB9889000001326754CDFEAB98,6754CDFEAB9889BAEFDC457623100132,\
326754CDFEAB9889BAEFDC4576231001,TRUE,TRUE,TRUE".format(
self._vnid, username)
self._anritsu.send_command(cmd)
@property
def fi_cscf_userslist_add(self):
""" Get CSCF USERLIST
Args:
None
Returns:
CSCF USERLIST
"""
cmd = "IMSCSCFUSERSLIST? " + self._vnid
return self._anritsu.send_query(cmd)
@fi_cscf_userslist_add.setter
def fi_cscf_userslist_add(self, username):
""" Set CSCF USER to USERLIST
This is needed if IMS AUTH is enabled
Args:
username: CSCF Username
Returns:
None
"""
cmd = "IMSCSCFUSERSLISTADD {},{},00112233445566778899AABBCCDDEEFF,TS34108,AKAV1_MD5,\
OPC,00000000000000000000000000000000,8000,TRUE,FALSE,0123456789ABCDEF0123456789ABCDEF,\
54CDFEAB9889000001326754CDFEAB98,6754CDFEAB9889BAEFDC457623100132,\
326754CDFEAB9889BAEFDC4576231001,TRUE,TRUE,TRUE".format(
self._vnid, username)
self._anritsu.send_command(cmd)
@property
def vzw_cscf_userslist_add(self):
""" Get CSCF USERLIST
Args:
None
Returns:
CSCF USERLIST
"""
cmd = "IMSCSCFUSERSLIST? " + self._vnid
return self._anritsu.send_query(cmd)
@vzw_cscf_userslist_add.setter
def vzw_cscf_userslist_add(self, username):
""" Set CSCF USER to USERLIST
This is needed if IMS AUTH is enabled
Args:
username: CSCF Username
Returns:
None
"""
cmd = "IMSCSCFUSERSLISTADD {},{},465B5CE8B199B49FAA5F0A2EE238A6BC,MILENAGE,AKAV1_MD5,\
OP,5F1D289C5D354D0A140C2548F5F3E3BA,8000,TRUE,FALSE,0123456789ABCDEF0123456789ABCDEF,\
54CDFEAB9889000001326754CDFEAB98,6754CDFEAB9889BAEFDC457623100132,\
326754CDFEAB9889BAEFDC4576231001,TRUE,TRUE,TRUE".format(
self._vnid, username)
self._anritsu.send_command(cmd)
@property
def dns(self):
""" Gets DNS Enable status
Args:
None
Returns:
VNID DNS Enable status
"""
cmd = "IMSDNS? " + self._vnid
return self._anritsu.send_query(cmd)
@dns.setter
def dns(self, switch):
""" Set DNS Enable or Disable
Args:
sync: ENABLE/DISABLE
Returns:
None
"""
if not isinstance(switch, Switch):
raise ValueError(' The parameter should be of type "Switch"')
cmd = "IMSDNS {},{}".format(self._vnid, switch.value)
self._anritsu.send_command(cmd)
@property
def ndp_nic(self):
""" Gets NDP Network Interface name
Args:
None
Returns:
NDP NIC name
"""
cmd = "IMSNDPNIC? " + self._vnid
return self._anritsu.send_query(cmd)
@ndp_nic.setter
def ndp_nic(self, nic_name):
""" Set NDP Network Interface name
Args:
nic_name: NDP Network Interface name
Returns:
None
"""
cmd = "IMSNDPNIC {},{}".format(self._vnid, nic_name)
self._anritsu.send_command(cmd)
@property
def ndp_prefix(self):
""" Gets NDP IPv6 Prefix
Args:
None
Returns:
NDP IPv6 Prefix
"""
cmd = "IMSNDPPREFIX? " + self._vnid
return self._anritsu.send_query(cmd)
@ndp_prefix.setter
def ndp_prefix(self, prefix_addr):
""" Set NDP IPv6 Prefix
Args:
prefix_addr: NDP IPV6 Prefix Addr
Returns:
None
"""
cmd = "IMSNDPPREFIX {},{},64".format(self._vnid, prefix_addr)
self._anritsu.send_command(cmd)
@property
def psap(self):
""" Gets PSAP Enable status
Args:
None
Returns:
VNID PSAP Enable status
"""
cmd = "IMSPSAP? " + self._vnid
return self._anritsu.send_query(cmd)
@psap.setter
def psap(self, switch):
""" Set PSAP Enable or Disable
Args:
switch: ENABLE/DISABLE
Returns:
None
"""
if not isinstance(switch, Switch):
raise ValueError(' The parameter should be of type "Switch"')
cmd = "IMSPSAP {},{}".format(self._vnid, switch.value)
self._anritsu.send_command(cmd)
@property
def psap_auto_answer(self):
""" Gets PSAP Auto Answer status
Args:
None
Returns:
VNID PSAP Auto Answer status
"""
cmd = "IMSPSAPAUTOANSWER? " + self._vnid
return self._anritsu.send_query(cmd)
@psap_auto_answer.setter
def psap_auto_answer(self, switch):
""" Set PSAP Auto Answer Enable or Disable
Args:
switch: ENABLE/DISABLE
Returns:
None
"""
if not isinstance(switch, Switch):
raise ValueError(' The parameter should be of type "Switch"')
cmd = "IMSPSAPAUTOANSWER {},{}".format(self._vnid, switch.value)
self._anritsu.send_command(cmd)
def start_virtual_network(self):
""" Start the specified Virtual Network (IMS service)
Args:
None
Returns:
None
"""
cmd = "IMSSTARTVN " + self._vnid
return self._anritsu.send_command(cmd)