| #!/usr/bin/env python3 |
| # |
| # Copyright 2016 - The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| """ |
| Utility functions for for Anritsu Signalling Tester. |
| """ |
| # yapf: disable |
| |
| OPERATION_COMPLETE = 1 |
| NO_ERROR = 0 |
| |
| ANRITSU_ERROR_CODES = { |
| 0: 'No errors occurred', |
| 2: 'The specified file does not exist', |
| 14: 'The buffer size is insufficient', |
| 29: 'The save destination is a write-protected file.', |
| 80: 'A file with the same name already exists.' |
| ' (If Overwrite is specified to 0.)', |
| 87: 'The specified value is wrong.', |
| 112: 'The disk space is insufficient.', |
| 183: 'SmartStudio is already running.', |
| 1060: 'The control software has not been started or has already terminated', |
| 1067: 'SmartStudio, control software or SMS Centre could not start due to' |
| 'a problem or problems resulting from OS or the MD8475A system.', |
| 1229: 'Connecting to the server failed.', |
| 1235: 'A request is suspended.', |
| 1460: 'The operation is terminated due to the expiration of the' |
| ' timeout period.', |
| 9999: 'A GPIB command error occurred.', |
| 536870912: 'The license could not be confirmed.', |
| 536870913: 'The specified file cannot be loaded by the SmartStudio.', |
| 536870914: 'The specified process ID does not exist.', |
| 536870915: 'The received data does not exist.', |
| 536870916: 'Simulation is not running.', |
| 536870917: 'Simulation is running.', |
| 536870918: 'Test Case has never been executed.', |
| 536870919: 'The resource cannot be obtained.', |
| 536870920: 'A resource protocol error, such as download error or' |
| ' license error, occurred.', |
| 536870921: 'The function call has been in invalid status.', |
| 536870922: 'The current Simulation Model does not allow the operation.', |
| 536870923: 'The Cell name to be set does not exist.', |
| 536870924: 'The test is being executed.', |
| 536870925: 'The current UE status does not correspond to the' |
| ' test parameters.', |
| 536870926: 'There is no LOG information because the simulation' |
| ' has not been executed.', |
| 536870927: 'Measure Export has already been executed.', |
| 536870928: 'SmartStudio is not connected to the SMS Centre.', |
| 536870929: 'SmartStudio failed to send an SMS message to the SMS Centre.', |
| 536870930: 'SmartStudio has successfully sent an SMS message' |
| ' to the SMS Centre,but the SMS Centre judges it as an error.', |
| 536870931: 'The processing that is unavailable with the current system' |
| ' status has been executed.', |
| 536870932: 'The option could not be confirmed.', |
| 536870933: 'Measure Export has been stopped.', |
| 536870934: 'SmartStudio cannot load the specified file because the' |
| ' version is old.', |
| 536870935: 'The data with the specified PDN number does not exist.', |
| 536870936: 'The data with the specified Dedicated number does not exist.', |
| 536870937: 'The PDN data cannot be added because the upper limit of the' |
| ' number of PDN data has been reached.', |
| 536870938: 'The number of antennas, which cannot be set to the current' |
| ' Simulation Model,has been specified.', |
| 536870939: 'Calibration of path loss failed.', |
| 536870940: 'There is a parameter conflict.', |
| 536870941: 'The DL Ref Power setting is out of the setting range' |
| ' at W-CDMA (Evolution).', |
| 536870942: 'DC-HSDPA is not available for the current channel setting.', |
| 536870943: 'The specified Packet Rate cannot be used by the current' |
| ' Simulation Model.', |
| 536870944: 'The W-CDMA Cell parameter F-DPCH is set to Enable.', |
| 536870945: 'Target is invalid.', |
| 536870946: 'The PWS Centre detects an error.', |
| 536870947: 'The Ec/Ior setting is invalid.', |
| 536870948: 'The combination of Attach Type and TA Update Type is invalid.', |
| 536870949: 'The license of the option has expired.', |
| 536870950: 'The Ping command is being executed.', |
| 536870951: 'The Ping command is not being executed.', |
| 536870952: 'The current Test Case parameter setting is wrong.', |
| 536870953: 'The specified IP address is the same as that of Default Gateway' |
| 'specified by Simulation parameter.', |
| 536870954: 'TFT IE conversion failed.', |
| 536870955: 'Saving settings to the SmartStudio scenario failed.', |
| 536875008: 'An error exists in the parameter configuration.' |
| '(This error applies only to the current version.)', |
| 536936448: 'License verification failed.', |
| 536936449: 'The IMS Services cannot load the specified file.', |
| 536936462: 'Simulation is not performed and no log information exists.', |
| 536936467: 'The executed process is inoperable in the current status' |
| ' of Visual User Agent.', |
| 536936707: 'The specified Virtual Network is not running.', |
| 536936709: 'The specified Virtual Network is running. ' |
| 'Any one of the Virtual Networks is running.', |
| 536936727: 'The specified Virtual Network does not exist.', |
| 536936729: 'When the Virtual Network already exists.', |
| 554762241: 'The RF Measurement launcher cannot be accessed.', |
| 554762242: 'License check of the RF Measurement failed.', |
| 554762243: 'Function is called when RF Measurement cannot be set.', |
| 554762244: 'RF Measurement has been already started.', |
| 554762245: 'RF Measurement failed to start due to a problem resulting' |
| ' from OS or the MD8475A system.', |
| 554762246: 'RF Measurement is not started or is already terminated.', |
| 554762247: 'There is a version mismatch between RF Measurement and CAL.', |
| 554827777: 'The specified value for RF Measurement is abnormal.', |
| 554827778: 'GPIB command error has occurred in RF Measurement.', |
| 554827779: 'Invalid file path was specified to RF Measurement.', |
| 554827780: 'RF Measurement argument is NULL pointer.', |
| 555810817: 'RF Measurement is now performing the measurement.', |
| 555810818: 'RF Measurement is now not performing the measurement.', |
| 555810819: 'RF Measurement is not measured yet. (There is no result ' |
| 'information since measurement is not performed.)', |
| 555810820: 'An error has occurred when RF Measurement' |
| ' starts the measurement.', |
| 555810821: 'Simulation has stopped when RF Measurement is ' |
| 'performing the measurement.', |
| 555810822: 'An error has been retrieved from the Platform when ' |
| 'RF Measurement is performing the measurement.', |
| 555810823: 'Measurement has been started in the system state where RF ' |
| 'Measurement is invalid.', |
| 556859393: 'RF Measurement is now saving a file.', |
| 556859394: 'There is insufficient disk space when saving' |
| 'a Measure Result file of RF Measurement.', |
| 556859395: 'An internal error has occurred or USB cable has been' |
| ' disconnected when saving a Measure Result' |
| ' file of RF Measurement.', |
| 556859396: 'A write-protected file was specified as the save destination' |
| ' when saving a Measure Result file of RF Measurement.', |
| 568328193: 'An internal error has occurred in RF Measurement.', |
| 687865857: 'Calibration Measure DSP is now being measured.', |
| 687865858: 'Calibration measurement failed.', |
| 687865859: 'Calibration slot is empty or its system does not apply.', |
| 687865860: 'Unexpected command is received from Calibration HWC.', |
| 687865861: 'Failed to receive the Calibration measurement result.', |
| 687865862: 'Failed to open the correction value file on the' |
| ' Calibration HDD.', |
| 687865863: 'Failed to move the pointer on the Calibration correction' |
| ' value table.', |
| 687865864: 'Failed to write the correction value to the Calibration' |
| ' correction value file on the Calibration HDD.', |
| 687865865: 'Failed to load the correction value from the Calibration HDD.', |
| 687865866: 'Failed to create a directory to which the correction value ' |
| 'file on the Calibration HDD is saved.', |
| 687865867: 'Correction data has not been written in the' |
| ' Calibration-specified correction table.', |
| 687865868: 'Data received from Calibration HWC does not exist.', |
| 687865869: 'Data has not been written to the Flash ROM' |
| ' of Calibration BASE UNIT.', |
| 687865870: 'Correction data has not been written to the' |
| ' Calibration-specified sector.', |
| 687866111: 'An calibration error other than described above occurred.', |
| } |
| |
| |
| def _error_code_tostring(error_code): |
| ''' returns the description of the error from the error code |
| returned by anritsu MD8475A ''' |
| try: |
| error_string = ANRITSU_ERROR_CODES[error_code] |
| except KeyError: |
| error_string = "Error : {} ".format(error_code) |
| |
| return error_string |
| |
| |
| class AnritsuUtils(object): |
| def gsm_encode(text): |
| '''To encode text string with GSM 7-bit alphabet for common symbols''' |
| table = {' ': '%20', '!': '%21', '\"': '%22', '#': '%23', '$': '%24', |
| '/': '%2F', '%': '%25', '&': '%26', '\'': '%27', '(': '%28', |
| ')': '%29', '*': '%2A', '+': '%2B', ',': '%2C', ':': '%3A', |
| ';': '%3B', '<': '%3C', '=': '%3D', '>': '%3E', '?': '%3F', |
| '@': '%40', '[': '%5B', ']': '%5D', '_': '%5F', 'é': '%C3%A9'} |
| coded_str = "" |
| for char in text: |
| if char in table: |
| coded_str += table[char] |
| else: |
| coded_str += char |
| return coded_str |
| |
| def gsm_decode(text): |
| '''To decode text string with GSM 7-bit alphabet for common symbols''' |
| table = {'%20': ' ', '%21': '!', '%22': '\"', '%23': '#', '%24': '$', |
| '%2F': '/', '%25': '%', '%26': '&', '%27': '\'', '%28': '(', |
| '%29': ')', '%2A': '*', '%2B': '+', '%2C': ',', '%3A': ':', |
| '%3B': ';', '%3C': '<', '%3D': '=', '%3E': '>', '%3F': '?', |
| '%40': '@', '%5B': '[', '%5D': ']', '%5F': '_', '%C3%A9': 'é'} |
| coded_str = text |
| for char in table: |
| if char in text: |
| coded_str = coded_str.replace(char, table[char]) |
| return coded_str |
| |
| def cdma_encode(text): |
| '''To encode text string with GSM 7-bit alphabet for common symbols''' |
| table = {' ': '%20', '!': '%21', '\"': '%22', '#': '%23', '$': '%24', |
| '/': '%2F', '%': '%25', '&': '%26', '\'': '%27', '(': '%28', |
| ')': '%29', '*': '%2A', '+': '%2B', ',': '%2C', ':': '%3A', |
| ';': '%3B', '<': '%3C', '=': '%3D', '>': '%3E', '?': '%3F', |
| '@': '%40', '[': '%5B', ']': '%5D', '_': '%5F'} |
| coded_str = "" |
| for char in text: |
| if char in table: |
| coded_str += table[char] |
| else: |
| coded_str += char |
| return coded_str |
| |
| class AnritsuError(Exception): |
| '''Exception for errors related to Anritsu.''' |
| def __init__(self, error, command=None): |
| self._error_code = error |
| self._error_message = _error_code_tostring(self._error_code) |
| if command is not None: |
| self._error_message = "Command {} returned the error: '{}'".format( |
| command, self._error_message) |
| |
| def __str__(self): |
| return self._error_message |
| # yapf: enable |
