blob: 5a1d7b17f04d4e03fc11e225748eb52575aa0188 [file] [log] [blame]
//
// Copyright (C) 2011 The Android Open Source Project
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
#include "update_engine/omaha_response_handler_action.h"
#include <string>
#include <base/logging.h>
#include <base/strings/string_number_conversions.h>
#include <base/strings/string_util.h>
#include <policy/device_policy.h>
#include "update_engine/common/constants.h"
#include "update_engine/common/hardware_interface.h"
#include "update_engine/common/prefs_interface.h"
#include "update_engine/common/utils.h"
#include "update_engine/connection_manager_interface.h"
#include "update_engine/omaha_request_params.h"
#include "update_engine/payload_consumer/delta_performer.h"
#include "update_engine/payload_state_interface.h"
#include "update_engine/update_manager/policy.h"
#include "update_engine/update_manager/update_manager.h"
using chromeos_update_manager::Policy;
using chromeos_update_manager::UpdateManager;
using std::string;
namespace chromeos_update_engine {
OmahaResponseHandlerAction::OmahaResponseHandlerAction(
SystemState* system_state)
: OmahaResponseHandlerAction(system_state,
constants::kOmahaResponseDeadlineFile) {}
OmahaResponseHandlerAction::OmahaResponseHandlerAction(
SystemState* system_state, const string& deadline_file)
: system_state_(system_state),
key_path_(constants::kUpdatePayloadPublicKeyPath),
deadline_file_(deadline_file) {}
void OmahaResponseHandlerAction::PerformAction() {
CHECK(HasInputObject());
ScopedActionCompleter completer(processor_, this);
const OmahaResponse& response = GetInputObject();
if (!response.update_exists) {
LOG(INFO) << "There are no updates. Aborting.";
completer.set_code(ErrorCode::kNoUpdate);
return;
}
// All decisions as to which URL should be used have already been done. So,
// make the current URL as the download URL.
string current_url = system_state_->payload_state()->GetCurrentUrl();
if (current_url.empty()) {
// This shouldn't happen as we should always supply the HTTPS backup URL.
// Handling this anyway, just in case.
LOG(ERROR) << "There are no suitable URLs in the response to use.";
completer.set_code(ErrorCode::kOmahaResponseInvalid);
return;
}
// This is the url to the first package, not all packages.
install_plan_.download_url = current_url;
install_plan_.version = response.version;
install_plan_.system_version = response.system_version;
OmahaRequestParams* const params = system_state_->request_params();
PayloadStateInterface* const payload_state = system_state_->payload_state();
// If we're using p2p to download and there is a local peer, use it.
if (payload_state->GetUsingP2PForDownloading() &&
!payload_state->GetP2PUrl().empty()) {
LOG(INFO) << "Replacing URL " << install_plan_.download_url
<< " with local URL " << payload_state->GetP2PUrl()
<< " since p2p is enabled.";
install_plan_.download_url = payload_state->GetP2PUrl();
payload_state->SetUsingP2PForDownloading(true);
}
// Fill up the other properties based on the response.
string update_check_response_hash;
for (const auto& package : response.packages) {
brillo::Blob raw_hash;
if (!base::HexStringToBytes(package.hash, &raw_hash)) {
LOG(ERROR) << "Failed to convert payload hash from hex string to bytes: "
<< package.hash;
completer.set_code(ErrorCode::kOmahaResponseInvalid);
return;
}
install_plan_.payloads.push_back(
{.size = package.size,
.metadata_size = package.metadata_size,
.metadata_signature = package.metadata_signature,
.hash = raw_hash,
.type = package.is_delta ? InstallPayloadType::kDelta
: InstallPayloadType::kFull});
update_check_response_hash += package.hash + ":";
}
install_plan_.public_key_rsa = response.public_key_rsa;
install_plan_.hash_checks_mandatory = AreHashChecksMandatory(response);
install_plan_.is_resume = DeltaPerformer::CanResumeUpdate(
system_state_->prefs(), update_check_response_hash);
if (install_plan_.is_resume) {
payload_state->UpdateResumed();
} else {
payload_state->UpdateRestarted();
LOG_IF(WARNING,
!DeltaPerformer::ResetUpdateProgress(system_state_->prefs(), false))
<< "Unable to reset the update progress.";
LOG_IF(WARNING,
!system_state_->prefs()->SetString(kPrefsUpdateCheckResponseHash,
update_check_response_hash))
<< "Unable to save the update check response hash.";
}
install_plan_.source_slot = system_state_->boot_control()->GetCurrentSlot();
install_plan_.target_slot = install_plan_.source_slot == 0 ? 1 : 0;
// The Omaha response doesn't include the channel name for this image, so we
// use the download_channel we used during the request to tag the target slot.
// This will be used in the next boot to know the channel the image was
// downloaded from.
string current_channel_key =
kPrefsChannelOnSlotPrefix + std::to_string(install_plan_.target_slot);
system_state_->prefs()->SetString(current_channel_key,
params->download_channel());
if (response.powerwash_required || params->ShouldPowerwash())
install_plan_.powerwash_required = true;
TEST_AND_RETURN(HasOutputPipe());
if (HasOutputPipe())
SetOutputObject(install_plan_);
LOG(INFO) << "Using this install plan:";
install_plan_.Dump();
// Send the deadline data (if any) to Chrome through a file. This is a pretty
// hacky solution but should be OK for now.
//
// TODO(petkov): Re-architect this to avoid communication through a
// file. Ideally, we would include this information in D-Bus's GetStatus
// method and UpdateStatus signal. A potential issue is that update_engine may
// be unresponsive during an update download.
if (!deadline_file_.empty()) {
utils::WriteFile(deadline_file_.c_str(),
response.deadline.data(),
response.deadline.size());
chmod(deadline_file_.c_str(), S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
}
// Check the generated install-plan with the Policy to confirm that
// it can be applied at this time (or at all).
UpdateManager* const update_manager = system_state_->update_manager();
CHECK(update_manager);
auto ec = ErrorCode::kSuccess;
update_manager->PolicyRequest(
&Policy::UpdateCanBeApplied, &ec, &install_plan_);
completer.set_code(ec);
}
bool OmahaResponseHandlerAction::AreHashChecksMandatory(
const OmahaResponse& response) {
// We sometimes need to waive the hash checks in order to download from
// sources that don't provide hashes, such as dev server.
// At this point UpdateAttempter::IsAnyUpdateSourceAllowed() has already been
// checked, so an unofficial update URL won't get this far unless it's OK to
// use without a hash. Additionally, we want to always waive hash checks on
// unofficial builds (i.e. dev/test images).
// The end result is this:
// * Base image:
// - Official URLs require a hash.
// - Unofficial URLs only get this far if the IsAnyUpdateSourceAllowed()
// devmode/debugd checks pass, in which case the hash is waived.
// * Dev/test image:
// - Any URL is allowed through with no hash checking.
if (!system_state_->request_params()->IsUpdateUrlOfficial() ||
!system_state_->hardware()->IsOfficialBuild()) {
// Still do a hash check if a public key is included.
if (!response.public_key_rsa.empty()) {
// The autoupdate_CatchBadSignatures test checks for this string
// in log-files. Keep in sync.
LOG(INFO) << "Mandating payload hash checks since Omaha Response "
<< "for unofficial build includes public RSA key.";
return true;
} else {
LOG(INFO) << "Waiving payload hash checks for unofficial update URL.";
return false;
}
}
// If we're using p2p, |install_plan_.download_url| may contain a
// HTTP URL even if |response.payload_urls| contain only HTTPS URLs.
if (!base::StartsWith(install_plan_.download_url, "https://",
base::CompareCase::INSENSITIVE_ASCII)) {
LOG(INFO) << "Mandating hash checks since download_url is not HTTPS.";
return true;
}
// TODO(jaysri): VALIDATION: For official builds, we currently waive hash
// checks for HTTPS until we have rolled out at least once and are confident
// nothing breaks. chromium-os:37082 tracks turning this on for HTTPS
// eventually.
// Even if there's a single non-HTTPS URL, make the hash checks as
// mandatory because we could be downloading the payload from any URL later
// on. It's really hard to do book-keeping based on each byte being
// downloaded to see whether we only used HTTPS throughout.
for (const auto& package : response.packages) {
for (const string& payload_url : package.payload_urls) {
if (!base::StartsWith(
payload_url, "https://", base::CompareCase::INSENSITIVE_ASCII)) {
LOG(INFO) << "Mandating payload hash checks since Omaha response "
<< "contains non-HTTPS URL(s)";
return true;
}
}
}
LOG(INFO) << "Waiving payload hash checks since Omaha response "
<< "only has HTTPS URL(s)";
return false;
}
} // namespace chromeos_update_engine