blob: 1281695c8fc0d3f55d83fae3bba621a1cd8d8718 [file] [log] [blame]
LOCAL_PATH:= $(call my-dir)
# PLATFORM_SEPOLICY_VERSION is a number of the form "NN.m" with "NN" mapping to
# PLATFORM_SDK_VERSION and "m" as a minor number which allows for SELinux
# changes independent of PLATFORM_SDK_VERSION. This value will be set to
# 10000.0 to represent tip-of-tree development that is inherently unstable and
# thus designed not to work with any shipping vendor policy. This is similar in
# spirit to how DEFAULT_APP_TARGET_SDK is set.
# The minor version ('m' component) must be updated every time a platform release
# is made which breaks compatibility with the previous platform sepolicy version,
# not just on every increase in PLATFORM_SDK_VERSION. The minor version should
# be reset to 0 on every bump of the PLATFORM_SDK_VERSION.
sepolicy_major_vers := 25
sepolicy_minor_vers := 0
ifneq ($(sepolicy_major_vers), $(PLATFORM_SDK_VERSION))
$(error sepolicy_major_version does not match PLATFORM_SDK_VERSION, please update.)
endif
ifneq (REL,$(PLATFORM_VERSION_CODENAME))
sepolicy_major_vers := 10000
sepolicy_minor_vers := 0
endif
PLATFORM_SEPOLICY_VERSION := $(join $(addsuffix .,$(sepolicy_major_vers)), $(sepolicy_minor_vers))
sepolicy_major_vers :=
sepolicy_minor_vers :=
include $(CLEAR_VARS)
# SELinux policy version.
# Must be <= /sys/fs/selinux/policyvers reported by the Android kernel.
# Must be within the compatibility range reported by checkpolicy -V.
POLICYVERS ?= 30
MLS_SENS=1
MLS_CATS=1024
ifdef BOARD_SEPOLICY_REPLACE
$(error BOARD_SEPOLICY_REPLACE is no longer supported; please remove from your BoardConfig.mk or other .mk file.)
endif
ifdef BOARD_SEPOLICY_IGNORE
$(error BOARD_SEPOLICY_IGNORE is no longer supported; please remove from your BoardConfig.mk or other .mk file.)
endif
ifdef BOARD_SEPOLICY_UNION
$(warning BOARD_SEPOLICY_UNION is no longer required - all files found in BOARD_SEPOLICY_DIRS are implicitly unioned; please remove from your BoardConfig.mk or other .mk file.)
endif
ifdef BOARD_SEPOLICY_M4DEFS
LOCAL_ADDITIONAL_M4DEFS := $(addprefix -D, $(BOARD_SEPOLICY_M4DEFS))
endif
# sepolicy is now divided into multiple portions:
# public - policy exported on which non-platform policy developers may write
# additional policy. types and attributes are versioned and included in
# delivered non-platform policy, which is to be combined with platform policy.
# private - platform-only policy required for platform functionality but which
# is not exported to vendor policy developers and as such may not be assumed
# to exist.
# vendor - vendor-only policy required for vendor functionality. This policy can
# reference the public policy but cannot reference the private policy. This
# policy is for components which are produced from the core/non-vendor tree and
# placed into a vendor partition.
# mapping - This contains policy statements which map the attributes
# exposed in the public policy of previous versions to the concrete types used
# in this policy to ensure that policy targeting attributes from public
# policy from an older platform version continues to work.
# build process for device:
# 1) convert policies to CIL:
# - private + public platform policy to CIL
# - mapping file to CIL (should already be in CIL form)
# - non-platform public policy to CIL
# - non-platform public + private policy to CIL
# 2) attributize policy
# - run script which takes non-platform public and non-platform combined
# private + public policy and produces attributized and versioned
# non-platform policy
# 3) combine policy files
# - combine mapping, platform and non-platform policy.
# - compile output binary policy file
PLAT_PUBLIC_POLICY := $(LOCAL_PATH)/public
PLAT_PRIVATE_POLICY := $(LOCAL_PATH)/private
PLAT_VENDOR_POLICY := $(LOCAL_PATH)/vendor
REQD_MASK_POLICY := $(LOCAL_PATH)/reqd_mask
# TODO: move to README when doing the README update and finalizing versioning.
# BOARD_SEPOLICY_VERS must take the format "NN.m" and contain the sepolicy
# version identifier corresponding to the sepolicy on which the non-platform
# policy is to be based. If unspecified, this will build against the current
# public platform policy in tree
ifndef BOARD_SEPOLICY_VERS
$(warning BOARD_SEPOLICY_VERS not specified, assuming current platform version)
# The default platform policy version.
BOARD_SEPOLICY_VERS := $(PLATFORM_SEPOLICY_VERSION)
endif
platform_mapping_file := $(BOARD_SEPOLICY_VERS).cil
###########################################################
# Compute policy files to be used in policy build.
# $(1): files to include
# $(2): directories in which to find files
###########################################################
define build_policy
$(foreach type, $(1), $(foreach file, $(addsuffix /$(type), $(2)), $(sort $(wildcard $(file)))))
endef
# Builds paths for all policy files found in BOARD_SEPOLICY_DIRS.
# $(1): the set of policy name paths to build
build_device_policy = $(call build_policy, $(1), $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS))
# Add a file containing only a newline in-between each policy configuration
# 'contexts' file. This will allow OEM policy configuration files without a
# final newline (0x0A) to be built correctly by the m4(1) macro processor.
# $(1): the set of contexts file names.
# $(2): the file containing only 0x0A.
add_nl = $(foreach entry, $(1), $(subst $(entry), $(entry) $(2), $(entry)))
sepolicy_build_files := security_classes \
initial_sids \
access_vectors \
global_macros \
neverallow_macros \
mls_macros \
mls_decl \
mls \
policy_capabilities \
te_macros \
attributes \
ioctl_defines \
ioctl_macros \
*.te \
roles_decl \
roles \
users \
initial_sid_contexts \
fs_use \
genfs_contexts \
port_contexts
# CIL files which contain workarounds for current limitation of human-readable
# module policy language. These files are appended to the CIL files produced
# from module language files.
sepolicy_build_cil_workaround_files := technical_debt.cil
my_target_arch := $(TARGET_ARCH)
ifneq (,$(filter mips mips64,$(TARGET_ARCH)))
my_target_arch := mips
endif
intermediates := $(TARGET_OUT_INTERMEDIATES)/ETC/sepolicy_intermediates
with_asan := false
ifneq (,$(filter address,$(SANITIZE_TARGET)))
with_asan := true
endif
include $(CLEAR_VARS)
LOCAL_MODULE := selinux_policy
LOCAL_MODULE_TAGS := optional
# Include SELinux policy. We do this here because different modules
# need to be included based on the value of PRODUCT_FULL_TREBLE. This
# type of conditional inclusion cannot be done in top-level files such
# as build/target/product/embedded.mk.
# This conditional inclusion closely mimics the conditional logic
# inside init/init.cpp for loading SELinux policy from files.
ifeq ($(PRODUCT_FULL_TREBLE),true)
# Use split SELinux policy
LOCAL_REQUIRED_MODULES += \
$(platform_mapping_file) \
nonplat_sepolicy.cil \
plat_sepolicy.cil \
plat_and_mapping_sepolicy.cil.sha256 \
secilc \
nonplat_file_contexts \
plat_file_contexts \
plat_sepolicy_vers.txt
# Include precompiled policy, unless told otherwise
ifneq ($(PRODUCT_PRECOMPILED_SEPOLICY),false)
LOCAL_REQUIRED_MODULES += precompiled_sepolicy precompiled_sepolicy.plat_and_mapping.sha256
endif
else
# Use monolithic SELinux policy
LOCAL_REQUIRED_MODULES += sepolicy \
file_contexts.bin
endif
include $(BUILD_PHONY_PACKAGE)
##################################
# reqd_policy_mask - a policy.conf file which contains only the bare minimum
# policy necessary to use checkpolicy. This bare-minimum policy needs to be
# present in all policy.conf files, but should not necessarily be exported as
# part of the public policy. The rules generated by reqd_policy_mask will allow
# the compilation of public policy and subsequent removal of CIL policy that
# should not be exported.
reqd_policy_mask.conf := $(intermediates)/reqd_policy_mask.conf
$(reqd_policy_mask.conf): PRIVATE_MLS_SENS := $(MLS_SENS)
$(reqd_policy_mask.conf): PRIVATE_MLS_CATS := $(MLS_CATS)
$(reqd_policy_mask.conf): PRIVATE_TGT_ARCH := $(my_target_arch)
$(reqd_policy_mask.conf): PRIVATE_TGT_WITH_ASAN := $(with_asan)
$(reqd_policy_mask.conf): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS)
$(reqd_policy_mask.conf): $(call build_policy, $(sepolicy_build_files), $(REQD_MASK_POLICY))
@mkdir -p $(dir $@)
$(hide) m4 $(PRIVATE_ADDITIONAL_M4DEFS) \
-D mls_num_sens=$(PRIVATE_MLS_SENS) -D mls_num_cats=$(PRIVATE_MLS_CATS) \
-D target_build_variant=$(TARGET_BUILD_VARIANT) \
-D target_with_dexpreopt=$(WITH_DEXPREOPT) \
-D target_arch=$(PRIVATE_TGT_ARCH) \
-D target_with_asan=$(PRIVATE_TGT_WITH_ASAN) \
-D target_full_treble=$(PRODUCT_FULL_TREBLE) \
-s $^ > $@
reqd_policy_mask.cil := $(intermediates)/reqd_policy_mask.cil
$(reqd_policy_mask.cil): $(reqd_policy_mask.conf) $(HOST_OUT_EXECUTABLES)/checkpolicy
@mkdir -p $(dir $@)
$(hide) $(HOST_OUT_EXECUTABLES)/checkpolicy -C -M -c $(POLICYVERS) -o $@ $<
reqd_policy_mask.conf :=
##################################
# plat_pub_policy - policy that will be exported to be a part of non-platform
# policy corresponding to this platform version. This is a limited subset of
# policy that would not compile in checkpolicy on its own. To get around this
# limitation, add only the required files from private policy, which will
# generate CIL policy that will then be filtered out by the reqd_policy_mask.
plat_pub_policy.conf := $(intermediates)/plat_pub_policy.conf
$(plat_pub_policy.conf): PRIVATE_MLS_SENS := $(MLS_SENS)
$(plat_pub_policy.conf): PRIVATE_MLS_CATS := $(MLS_CATS)
$(plat_pub_policy.conf): PRIVATE_TGT_ARCH := $(my_target_arch)
$(plat_pub_policy.conf): PRIVATE_TGT_WITH_ASAN := $(with_asan)
$(plat_pub_policy.conf): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS)
$(plat_pub_policy.conf): $(call build_policy, $(sepolicy_build_files), \
$(PLAT_PUBLIC_POLICY) $(REQD_MASK_POLICY))
@mkdir -p $(dir $@)
$(hide) m4 $(PRIVATE_ADDITIONAL_M4DEFS) \
-D mls_num_sens=$(PRIVATE_MLS_SENS) -D mls_num_cats=$(PRIVATE_MLS_CATS) \
-D target_build_variant=$(TARGET_BUILD_VARIANT) \
-D target_with_dexpreopt=$(WITH_DEXPREOPT) \
-D target_arch=$(PRIVATE_TGT_ARCH) \
-D target_with_asan=$(PRIVATE_TGT_WITH_ASAN) \
-D target_full_treble=$(PRODUCT_FULL_TREBLE) \
-s $^ > $@
plat_pub_policy.cil := $(intermediates)/plat_pub_policy.cil
$(plat_pub_policy.cil): PRIVATE_POL_CONF := $(plat_pub_policy.conf)
$(plat_pub_policy.cil): PRIVATE_REQD_MASK := $(reqd_policy_mask.cil)
$(plat_pub_policy.cil): $(HOST_OUT_EXECUTABLES)/checkpolicy $(plat_pub_policy.conf) $(reqd_policy_mask.cil)
@mkdir -p $(dir $@)
$(hide) $< -C -M -c $(POLICYVERS) -o $@.tmp $(PRIVATE_POL_CONF)
$(hide) grep -Fxv -f $(PRIVATE_REQD_MASK) $@.tmp > $@
plat_pub_policy.conf :=
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := sectxfile_nl
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
# Create a file containing newline only to add between context config files
include $(BUILD_SYSTEM)/base_rules.mk
$(LOCAL_BUILT_MODULE):
@mkdir -p $(dir $@)
$(hide) echo > $@
built_nl := $(LOCAL_BUILT_MODULE)
#################################
include $(CLEAR_VARS)
LOCAL_MODULE := plat_sepolicy.cil
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux
include $(BUILD_SYSTEM)/base_rules.mk
# plat_policy.conf - A combination of the private and public platform policy
# which will ship with the device. The platform will always reflect the most
# recent platform version and is not currently being attributized.
plat_policy.conf := $(intermediates)/plat_policy.conf
$(plat_policy.conf): PRIVATE_MLS_SENS := $(MLS_SENS)
$(plat_policy.conf): PRIVATE_MLS_CATS := $(MLS_CATS)
$(plat_policy.conf): PRIVATE_TGT_ARCH := $(my_target_arch)
$(plat_policy.conf): PRIVATE_TGT_WITH_ASAN := $(with_asan)
$(plat_policy.conf): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS)
$(plat_policy.conf): $(call build_policy, $(sepolicy_build_files), \
$(PLAT_PUBLIC_POLICY) $(PLAT_PRIVATE_POLICY))
@mkdir -p $(dir $@)
$(hide) m4 $(PRIVATE_ADDITIONAL_M4DEFS) \
-D mls_num_sens=$(PRIVATE_MLS_SENS) -D mls_num_cats=$(PRIVATE_MLS_CATS) \
-D target_build_variant=$(TARGET_BUILD_VARIANT) \
-D target_with_dexpreopt=$(WITH_DEXPREOPT) \
-D target_arch=$(PRIVATE_TGT_ARCH) \
-D target_with_asan=$(PRIVATE_TGT_WITH_ASAN) \
-D target_full_treble=$(PRODUCT_FULL_TREBLE) \
-s $^ > $@
$(hide) sed '/dontaudit/d' $@ > $@.dontaudit
plat_policy_nvr := $(intermediates)/plat_policy_nvr.cil
$(plat_policy_nvr): PRIVATE_ADDITIONAL_CIL_FILES := \
$(call build_policy, $(sepolicy_build_cil_workaround_files), $(PLAT_PRIVATE_POLICY))
$(plat_policy_nvr): $(plat_policy.conf) $(HOST_OUT_EXECUTABLES)/checkpolicy \
$(call build_policy, $(sepolicy_build_cil_workaround_files), $(PLAT_PRIVATE_POLICY))
@mkdir -p $(dir $@)
$(hide) $(HOST_OUT_EXECUTABLES)/checkpolicy -M -C -c $(POLICYVERS) -o $@ $<
$(hide) cat $(PRIVATE_ADDITIONAL_CIL_FILES) >> $@
$(LOCAL_BUILT_MODULE): PRIVATE_CIL_FILES := $(plat_policy_nvr)
$(LOCAL_BUILT_MODULE): $(HOST_OUT_EXECUTABLES)/secilc $(plat_policy_nvr)
@mkdir -p $(dir $@)
# Strip out neverallow statements. They aren't needed on-device and their presence
# significantly slows down on-device compilation (e.g., from 400 ms to 6,400 ms on
# sailfish-eng).
grep -v '^(neverallow' $(PRIVATE_CIL_FILES) > $@
# Confirm that the resulting policy compiles
$(hide) $(HOST_OUT_EXECUTABLES)/secilc -M true -G -c $(POLICYVERS) $@ -o /dev/null -f /dev/null
built_plat_cil := $(LOCAL_BUILT_MODULE)
plat_policy.conf :=
#################################
include $(CLEAR_VARS)
LOCAL_MODULE := plat_sepolicy_vers.txt
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_PROPRIETARY_MODULE := true
LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux
include $(BUILD_SYSTEM)/base_rules.mk
$(LOCAL_BUILT_MODULE) : PRIVATE_PLAT_SEPOL_VERS := $(BOARD_SEPOLICY_VERS)
$(LOCAL_BUILT_MODULE) :
mkdir -p $(dir $@)
echo $(PRIVATE_PLAT_SEPOL_VERS) > $@
#################################
include $(CLEAR_VARS)
LOCAL_MODULE := $(platform_mapping_file)
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux/mapping
include $(BUILD_SYSTEM)/base_rules.mk
# auto-generate the mapping file for current platform policy, since it needs to
# track platform policy development
current_mapping.cil := $(intermediates)/mapping/$(PLATFORM_SEPOLICY_VERSION).cil
$(current_mapping.cil) : PRIVATE_VERS := $(PLATFORM_SEPOLICY_VERSION)
$(current_mapping.cil) : $(plat_pub_policy.cil) $(HOST_OUT_EXECUTABLES)/version_policy
@mkdir -p $(dir $@)
$(hide) $(HOST_OUT_EXECUTABLES)/version_policy -b $< -m -n $(PRIVATE_VERS) -o $@
ifeq ($(BOARD_SEPOLICY_VERS), $(PLATFORM_SEPOLICY_VERSION))
mapping_policy_nvr := $(current_mapping.cil)
else
mapping_policy_nvr := $(addsuffix /$(BOARD_SEPOLICY_VERS).cil, $(PLAT_PRIVATE_POLICY)/mapping)
endif
$(LOCAL_BUILT_MODULE): $(mapping_policy_nvr)
# Strip out neverallow statements. They aren't needed on-device and their presence
# significantly slows down on-device compilation (e.g., from 400 ms to 6,400 ms on
# sailfish-eng).
grep -v '^(neverallow' $< > $@
built_mapping_cil := $(LOCAL_BUILT_MODULE)
current_mapping.cil :=
#################################
include $(CLEAR_VARS)
LOCAL_MODULE := plat_and_mapping_sepolicy.cil.sha256
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_MODULE_PATH = $(TARGET_OUT)/etc/selinux
include $(BUILD_SYSTEM)/base_rules.mk
$(LOCAL_BUILT_MODULE): $(built_plat_cil) $(built_mapping_cil)
cat $^ | sha256sum | cut -d' ' -f1 > $@
#################################
include $(CLEAR_VARS)
LOCAL_MODULE := nonplat_sepolicy.cil
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_PROPRIETARY_MODULE := true
LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux
include $(BUILD_SYSTEM)/base_rules.mk
# nonplat_policy.conf - A combination of the non-platform private, vendor and
# the exported platform policy associated with the version the non-platform
# policy targets. This needs attributization and to be combined with the
# platform-provided policy. Like plat_pub_policy.conf, this needs to make use
# of the reqd_policy_mask files from private policy in order to use checkpolicy.
nonplat_policy.conf := $(intermediates)/nonplat_policy.conf
$(nonplat_policy.conf): PRIVATE_MLS_SENS := $(MLS_SENS)
$(nonplat_policy.conf): PRIVATE_MLS_CATS := $(MLS_CATS)
$(nonplat_policy.conf): PRIVATE_TGT_ARCH := $(my_target_arch)
$(nonplat_policy.conf): PRIVATE_TGT_WITH_ASAN := $(with_asan)
$(nonplat_policy.conf): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS)
$(nonplat_policy.conf): $(call build_policy, $(sepolicy_build_files), \
$(PLAT_PUBLIC_POLICY) $(REQD_MASK_POLICY) $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS))
@mkdir -p $(dir $@)
$(hide) m4 $(PRIVATE_ADDITIONAL_M4DEFS) \
-D mls_num_sens=$(PRIVATE_MLS_SENS) -D mls_num_cats=$(PRIVATE_MLS_CATS) \
-D target_build_variant=$(TARGET_BUILD_VARIANT) \
-D target_with_dexpreopt=$(WITH_DEXPREOPT) \
-D target_arch=$(PRIVATE_TGT_ARCH) \
-D target_with_asan=$(PRIVATE_TGT_WITH_ASAN) \
-D target_full_treble=$(PRODUCT_FULL_TREBLE) \
-s $^ > $@
$(hide) sed '/dontaudit/d' $@ > $@.dontaudit
nonplat_policy_raw := $(intermediates)/nonplat_policy_raw.cil
$(nonplat_policy_raw): PRIVATE_POL_CONF := $(nonplat_policy.conf)
$(nonplat_policy_raw): PRIVATE_REQD_MASK := $(reqd_policy_mask.cil)
$(nonplat_policy_raw): $(HOST_OUT_EXECUTABLES)/checkpolicy $(nonplat_policy.conf) \
$(reqd_policy_mask.cil)
@mkdir -p $(dir $@)
$(hide) $< -C -M -c $(POLICYVERS) -o $@.tmp $(PRIVATE_POL_CONF)
$(hide) grep -Fxv -f $(PRIVATE_REQD_MASK) $@.tmp > $@
nonplat_policy_nvr := $(intermediates)/nonplat_policy_nvr.cil
$(nonplat_policy_nvr) : PRIVATE_VERS := $(BOARD_SEPOLICY_VERS)
$(nonplat_policy_nvr) : PRIVATE_TGT_POL := $(nonplat_policy_raw)
$(nonplat_policy_nvr) : $(plat_pub_policy.cil) $(nonplat_policy_raw) \
$(HOST_OUT_EXECUTABLES)/version_policy
@mkdir -p $(dir $@)
$(HOST_OUT_EXECUTABLES)/version_policy -b $< -t $(PRIVATE_TGT_POL) -n $(PRIVATE_VERS) -o $@
$(LOCAL_BUILT_MODULE): PRIVATE_NONPLAT_CIL_FILES := $(nonplat_policy_nvr)
$(LOCAL_BUILT_MODULE): PRIVATE_DEP_CIL_FILES := $(built_plat_cil) $(built_mapping_cil)
$(LOCAL_BUILT_MODULE): $(HOST_OUT_EXECUTABLES)/secilc $(nonplat_policy_nvr) $(built_plat_cil) \
$(built_mapping_cil)
@mkdir -p $(dir $@)
# Strip out neverallow statements. They aren't needed on-device and their presence
# significantly slows down on-device compilation (e.g., from 400 ms to 6,400 ms on
# sailfish-eng).
grep -v '^(neverallow' $(PRIVATE_NONPLAT_CIL_FILES) > $@
# Confirm that the resulting policy compiles combined with platform and mapping policies
$(hide) $(HOST_OUT_EXECUTABLES)/secilc -M true -G -c $(POLICYVERS) \
$(PRIVATE_DEP_CIL_FILES) $@ -o /dev/null -f /dev/null
built_nonplat_cil := $(LOCAL_BUILT_MODULE)
nonplat_policy.conf :=
nonplat_policy_raw :=
#################################
include $(CLEAR_VARS)
LOCAL_MODULE := precompiled_sepolicy
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_PROPRIETARY_MODULE := true
LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux
include $(BUILD_SYSTEM)/base_rules.mk
$(LOCAL_BUILT_MODULE): PRIVATE_CIL_FILES := \
$(built_plat_cil) $(built_mapping_cil) $(built_nonplat_cil)
$(LOCAL_BUILT_MODULE): $(HOST_OUT_EXECUTABLES)/secilc \
$(built_plat_cil) $(built_mapping_cil) $(built_nonplat_cil)
$(hide) $(HOST_OUT_EXECUTABLES)/secilc -M true -G -c $(POLICYVERS) \
$(PRIVATE_CIL_FILES) -o $@ -f /dev/null
built_precompiled_sepolicy := $(LOCAL_BUILT_MODULE)
#################################
# SHA-256 digest of the plat_sepolicy.cil and mapping_sepolicy.cil files against
# which precompiled_policy was built.
#################################
include $(CLEAR_VARS)
LOCAL_MODULE := precompiled_sepolicy.plat_and_mapping.sha256
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_PROPRIETARY_MODULE := true
LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux
include $(BUILD_SYSTEM)/base_rules.mk
$(LOCAL_BUILT_MODULE): PRIVATE_CIL_FILES := $(built_plat_cil) $(built_mapping_cil)
$(LOCAL_BUILT_MODULE): $(built_precompiled_sepolicy) $(built_plat_cil) $(built_mapping_cil)
cat $(PRIVATE_CIL_FILES) | sha256sum | cut -d' ' -f1 > $@
#################################
include $(CLEAR_VARS)
# build this target so that we can still perform neverallow checks
LOCAL_MODULE := sepolicy
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
include $(BUILD_SYSTEM)/base_rules.mk
all_cil_files := \
$(plat_policy_nvr) \
$(mapping_policy_nvr) \
$(nonplat_policy_nvr) \
$(LOCAL_BUILT_MODULE): PRIVATE_CIL_FILES := $(all_cil_files)
$(LOCAL_BUILT_MODULE): $(HOST_OUT_EXECUTABLES)/secilc $(HOST_OUT_EXECUTABLES)/sepolicy-analyze $(all_cil_files)
@mkdir -p $(dir $@)
$(hide) $< -M true -G -c $(POLICYVERS) $(PRIVATE_CIL_FILES) -o $@.tmp -f /dev/null
$(hide) $(HOST_OUT_EXECUTABLES)/sepolicy-analyze $@.tmp permissive > $@.permissivedomains
$(hide) if [ "$(TARGET_BUILD_VARIANT)" = "user" -a -s $@.permissivedomains ]; then \
echo "==========" 1>&2; \
echo "ERROR: permissive domains not allowed in user builds" 1>&2; \
echo "List of invalid domains:" 1>&2; \
cat $@.permissivedomains 1>&2; \
exit 1; \
fi
$(hide) mv $@.tmp $@
built_sepolicy := $(LOCAL_BUILT_MODULE)
all_cil_files :=
#################################
include $(CLEAR_VARS)
# keep concrete sepolicy for neverallow checks
LOCAL_MODULE := sepolicy.recovery
LOCAL_MODULE_STEM := sepolicy
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_MODULE_PATH := $(TARGET_RECOVERY_ROOT_OUT)
include $(BUILD_SYSTEM)/base_rules.mk
sepolicy.recovery.conf := $(intermediates)/sepolicy.recovery.conf
$(sepolicy.recovery.conf): PRIVATE_MLS_SENS := $(MLS_SENS)
$(sepolicy.recovery.conf): PRIVATE_MLS_CATS := $(MLS_CATS)
$(sepolicy.recovery.conf): PRIVATE_TGT_ARCH := $(my_target_arch)
$(sepolicy.recovery.conf): PRIVATE_TGT_WITH_ASAN := $(with_asan)
$(sepolicy.recovery.conf): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS)
$(sepolicy.recovery.conf): $(call build_policy, $(sepolicy_build_files), \
$(PLAT_PUBLIC_POLICY) $(PLAT_PRIVATE_POLICY) \
$(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS))
@mkdir -p $(dir $@)
$(hide) m4 $(PRIVATE_ADDITIONAL_M4DEFS) \
-D mls_num_sens=$(PRIVATE_MLS_SENS) -D mls_num_cats=$(PRIVATE_MLS_CATS) \
-D target_build_variant=$(TARGET_BUILD_VARIANT) \
-D target_with_dexpreopt=$(WITH_DEXPREOPT) \
-D target_arch=$(PRIVATE_TGT_ARCH) \
-D target_with_asan=$(PRIVATE_TGT_WITH_ASAN) \
-D target_recovery=true \
-s $^ > $@
$(hide) sed '/dontaudit/d' $@ > $@.dontaudit
$(LOCAL_BUILT_MODULE): $(sepolicy.recovery.conf) $(HOST_OUT_EXECUTABLES)/checkpolicy \
$(HOST_OUT_EXECUTABLES)/sepolicy-analyze
@mkdir -p $(dir $@)
$(hide) $(HOST_OUT_EXECUTABLES)/checkpolicy -M -c $(POLICYVERS) -o $@.tmp $<
$(hide) $(HOST_OUT_EXECUTABLES)/sepolicy-analyze $@.tmp permissive > $@.permissivedomains
$(hide) if [ "$(TARGET_BUILD_VARIANT)" = "user" -a -s $@.permissivedomains ]; then \
echo "==========" 1>&2; \
echo "ERROR: permissive domains not allowed in user builds" 1>&2; \
echo "List of invalid domains:" 1>&2; \
cat $@.permissivedomains 1>&2; \
exit 1; \
fi
$(hide) mv $@.tmp $@
sepolicy.recovery.conf :=
##################################
# SELinux policy embedded into CTS.
# CTS checks neverallow rules of this policy against the policy of the device under test.
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := general_sepolicy.conf
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := tests
include $(BUILD_SYSTEM)/base_rules.mk
$(LOCAL_BUILT_MODULE): PRIVATE_MLS_SENS := $(MLS_SENS)
$(LOCAL_BUILT_MODULE): PRIVATE_MLS_CATS := $(MLS_CATS)
$(LOCAL_BUILT_MODULE): PRIVATE_TGT_ARCH := $(my_target_arch)
$(LOCAL_BUILT_MODULE): $(call build_policy, $(sepolicy_build_files), \
$(PLAT_PUBLIC_POLICY) $(PLAT_PRIVATE_POLICY))
mkdir -p $(dir $@)
$(hide) m4 -D mls_num_sens=$(PRIVATE_MLS_SENS) -D mls_num_cats=$(PRIVATE_MLS_CATS) \
-D target_build_variant=user \
-D target_with_dexpreopt=$(WITH_DEXPREOPT) \
-D target_arch=$(PRIVATE_TGT_ARCH) \
-D target_with_asan=false \
-D target_full_treble=cts \
-s $^ > $@
$(hide) sed '/dontaudit/d' $@ > $@.dontaudit
##################################
# TODO - remove this. Keep around until we get the filesystem creation stuff taken care of.
#
include $(CLEAR_VARS)
LOCAL_MODULE := file_contexts.bin
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
include $(BUILD_SYSTEM)/base_rules.mk
# The file_contexts.bin is built in the following way:
# 1. Collect all file_contexts files in THIS repository and process them with
# m4 into a tmp file called file_contexts.local.tmp.
# 2. Collect all device specific file_contexts files and process them with m4
# into a tmp file called file_contexts.device.tmp.
# 3. Run checkfc -e (allow no device fc entries ie empty) and fc_sort on
# file_contexts.device.tmp and output to file_contexts.device.sorted.tmp.
# 4. Concatenate file_contexts.local.tmp and file_contexts.device.tmp into
# file_contexts.concat.tmp.
# 5. Run checkfc and sefcontext_compile on file_contexts.concat.tmp to produce
# file_contexts.bin.
#
# Note: That a newline file is placed between each file_context file found to
# ensure a proper build when an fc file is missing an ending newline.
local_fc_files := $(PLAT_PRIVATE_POLICY)/file_contexts
ifneq ($(filter address,$(SANITIZE_TARGET)),)
local_fc_files := $(local_fc_files) $(PLAT_PRIVATE_POLICY)/file_contexts_asan
endif
local_fcfiles_with_nl := $(call add_nl, $(local_fc_files), $(built_nl))
file_contexts.local.tmp := $(intermediates)/file_contexts.local.tmp
$(file_contexts.local.tmp): $(local_fcfiles_with_nl)
@mkdir -p $(dir $@)
$(hide) m4 -s $^ > $@
device_fc_files := $(call build_device_policy, file_contexts)
device_fcfiles_with_nl := $(call add_nl, $(device_fc_files), $(built_nl))
file_contexts.device.tmp := $(intermediates)/file_contexts.device.tmp
$(file_contexts.device.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS)
$(file_contexts.device.tmp): $(device_fcfiles_with_nl)
@mkdir -p $(dir $@)
$(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $^ > $@
file_contexts.device.sorted.tmp := $(intermediates)/file_contexts.device.sorted.tmp
$(file_contexts.device.sorted.tmp): PRIVATE_SEPOLICY := $(built_sepolicy)
$(file_contexts.device.sorted.tmp): $(file_contexts.device.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/fc_sort $(HOST_OUT_EXECUTABLES)/checkfc
@mkdir -p $(dir $@)
$(hide) $(HOST_OUT_EXECUTABLES)/checkfc -e $(PRIVATE_SEPOLICY) $<
$(hide) $(HOST_OUT_EXECUTABLES)/fc_sort $< $@
file_contexts.concat.tmp := $(intermediates)/file_contexts.concat.tmp
$(file_contexts.concat.tmp): $(file_contexts.local.tmp) $(file_contexts.device.sorted.tmp)
@mkdir -p $(dir $@)
$(hide) m4 -s $^ > $@
$(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy)
$(LOCAL_BUILT_MODULE): $(file_contexts.concat.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/sefcontext_compile $(HOST_OUT_EXECUTABLES)/checkfc
@mkdir -p $(dir $@)
$(hide) $(HOST_OUT_EXECUTABLES)/checkfc $(PRIVATE_SEPOLICY) $<
$(hide) $(HOST_OUT_EXECUTABLES)/sefcontext_compile -o $@ $<
built_fc := $(LOCAL_BUILT_MODULE)
local_fc_files :=
local_fcfiles_with_nl :=
device_fc_files :=
device_fcfiles_with_nl :=
file_contexts.concat.tmp :=
file_contexts.device.sorted.tmp :=
file_contexts.device.tmp :=
file_contexts.local.tmp :=
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := file_contexts.bin.recovery
LOCAL_MODULE_STEM := file_contexts.bin
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_MODULE_PATH := $(TARGET_RECOVERY_ROOT_OUT)
include $(BUILD_SYSTEM)/base_rules.mk
$(LOCAL_BUILT_MODULE): $(built_fc)
$(hide) cp -f $< $@
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := plat_file_contexts
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux
include $(BUILD_SYSTEM)/base_rules.mk
local_fc_files := $(PLAT_PRIVATE_POLICY)/file_contexts
ifneq ($(filter address,$(SANITIZE_TARGET)),)
local_fc_files += $(PLAT_PRIVATE_POLICY)/file_contexts_asan
endif
local_fcfiles_with_nl := $(call add_nl, $(local_fc_files), $(built_nl))
$(LOCAL_BUILT_MODULE): PRIVATE_FC_FILES := $(local_fcfiles_with_nl)
$(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy)
$(LOCAL_BUILT_MODULE): PRIVATE_FC_SORT := $(HOST_OUT_EXECUTABLES)/fc_sort
$(LOCAL_BUILT_MODULE): $(HOST_OUT_EXECUTABLES)/checkfc $(HOST_OUT_EXECUTABLES)/fc_sort \
$(local_fcfiles_with_nl) $(built_sepolicy)
@mkdir -p $(dir $@)
$(hide) m4 -s $(PRIVATE_FC_FILES) > $@.tmp
$(hide) $< $(PRIVATE_SEPOLICY) $@.tmp
$(hide) $(PRIVATE_FC_SORT) $@.tmp $@
built_plat_fc := $(LOCAL_BUILT_MODULE)
local_fc_files :=
local_fcfiles_with_nl :=
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := nonplat_file_contexts
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux
include $(BUILD_SYSTEM)/base_rules.mk
nonplat_fc_files := $(call build_device_policy, file_contexts)
nonplat_fcfiles_with_nl := $(call add_nl, $(nonplat_fc_files), $(built_nl))
$(LOCAL_BUILT_MODULE): PRIVATE_FC_FILES := $(nonplat_fcfiles_with_nl)
$(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy)
$(LOCAL_BUILT_MODULE): PRIVATE_FC_SORT := $(HOST_OUT_EXECUTABLES)/fc_sort
$(LOCAL_BUILT_MODULE): $(HOST_OUT_EXECUTABLES)/checkfc $(HOST_OUT_EXECUTABLES)/fc_sort \
$(nonplat_fcfiles_with_nl) $(built_sepolicy)
@mkdir -p $(dir $@)
$(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_FC_FILES) > $@.tmp
$(hide) $< $(PRIVATE_SEPOLICY) $@.tmp
$(hide) $(PRIVATE_FC_SORT) $@.tmp $@
built_nonplat_fc := $(LOCAL_BUILT_MODULE)
nonplat_fc_files :=
nonplat_fcfiles_with_nl :=
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := plat_seapp_contexts
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
ifeq ($(PRODUCT_FULL_TREBLE),true)
LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux
else
LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
endif
include $(BUILD_SYSTEM)/base_rules.mk
plat_sc_files := $(call build_policy, seapp_contexts, $(PLAT_PRIVATE_POLICY))
$(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy)
$(LOCAL_BUILT_MODULE): PRIVATE_SC_FILES := $(plat_sc_files)
$(LOCAL_BUILT_MODULE): $(built_sepolicy) $(plat_sc_files) $(HOST_OUT_EXECUTABLES)/checkseapp
@mkdir -p $(dir $@)
$(hide) $(HOST_OUT_EXECUTABLES)/checkseapp -p $(PRIVATE_SEPOLICY) -o $@ $(PRIVATE_SC_FILES)
built_plat_sc := $(LOCAL_BUILT_MODULE)
plat_sc_files :=
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := nonplat_seapp_contexts
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
ifeq ($(PRODUCT_FULL_TREBLE),true)
LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux
else
LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
endif
include $(BUILD_SYSTEM)/base_rules.mk
nonplat_sc_files := $(call build_policy, seapp_contexts, $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS) $(REQD_MASK_POLICY))
plat_sc_neverallow_files := $(addprefix $(PLAT_PRIVATE_POLICY)/, seapp_contexts)
$(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy)
$(LOCAL_BUILT_MODULE): PRIVATE_SC_FILES := $(nonplat_sc_files)
$(LOCAL_BUILT_MODULE): PRIVATE_SC_NEVERALLOW_FILES := $(plat_sc_neverallow_files)
$(LOCAL_BUILT_MODULE): $(built_sepolicy) $(nonplat_sc_files) $(HOST_OUT_EXECUTABLES)/checkseapp $(plat_sc_neverallow_files)
@mkdir -p $(dir $@)
$(hide) grep -ie '^neverallow' $(PRIVATE_SC_NEVERALLOW_FILES) > $@.tmp
$(hide) $(HOST_OUT_EXECUTABLES)/checkseapp -p $(PRIVATE_SEPOLICY) -o $@ $(PRIVATE_SC_FILES) $@.tmp
built_nonplat_sc := $(LOCAL_BUILT_MODULE)
nonplat_sc_files :=
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := plat_seapp_neverallows
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := tests
include $(BUILD_SYSTEM)/base_rules.mk
$(LOCAL_BUILT_MODULE): $(plat_sc_neverallow_files)
@mkdir -p $(dir $@)
- $(hide) grep -ie '^neverallow' $< > $@
plat_sc_neverallow_files :=
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := plat_property_contexts
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
ifeq ($(PRODUCT_FULL_TREBLE),true)
LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux
else
LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
endif
include $(BUILD_SYSTEM)/base_rules.mk
plat_pcfiles := $(call build_policy, property_contexts, $(PLAT_PRIVATE_POLICY))
plat_property_contexts.tmp := $(intermediates)/plat_property_contexts.tmp
$(plat_property_contexts.tmp): PRIVATE_PC_FILES := $(plat_pcfiles)
$(plat_property_contexts.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS)
$(plat_property_contexts.tmp): $(plat_pcfiles)
@mkdir -p $(dir $@)
$(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_PC_FILES) > $@
$(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy)
$(LOCAL_BUILT_MODULE): $(plat_property_contexts.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/checkfc
@mkdir -p $(dir $@)
$(hide) sed -e 's/#.*$$//' -e '/^$$/d' $< | sort -u -o $@
$(hide) $(HOST_OUT_EXECUTABLES)/checkfc -p $(PRIVATE_SEPOLICY) $@
built_plat_pc := $(LOCAL_BUILT_MODULE)
plat_pcfiles :=
plat_property_contexts.tmp :=
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := nonplat_property_contexts
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
ifeq ($(PRODUCT_FULL_TREBLE),true)
LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux
else
LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
endif
include $(BUILD_SYSTEM)/base_rules.mk
nonplat_pcfiles := $(call build_policy, property_contexts, $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS) $(REQD_MASK_POLICY))
nonplat_property_contexts.tmp := $(intermediates)/nonplat_property_contexts.tmp
$(nonplat_property_contexts.tmp): PRIVATE_PC_FILES := $(nonplat_pcfiles)
$(nonplat_property_contexts.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS)
$(nonplat_property_contexts.tmp): $(nonplat_pcfiles)
@mkdir -p $(dir $@)
$(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_PC_FILES) > $@
$(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy)
$(LOCAL_BUILT_MODULE): $(nonplat_property_contexts.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/checkfc
@mkdir -p $(dir $@)
$(hide) sed -e 's/#.*$$//' -e '/^$$/d' $< | sort -u -o $@
$(hide) $(HOST_OUT_EXECUTABLES)/checkfc -p $(PRIVATE_SEPOLICY) $@
built_nonplat_pc := $(LOCAL_BUILT_MODULE)
nonplat_pcfiles :=
nonplat_property_contexts.tmp :=
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := plat_property_contexts.recovery
LOCAL_MODULE_STEM := plat_property_contexts
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_MODULE_PATH := $(TARGET_RECOVERY_ROOT_OUT)
include $(BUILD_SYSTEM)/base_rules.mk
$(LOCAL_BUILT_MODULE): $(built_plat_pc)
$(hide) cp -f $< $@
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := nonplat_property_contexts.recovery
LOCAL_MODULE_STEM := nonplat_property_contexts
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_MODULE_PATH := $(TARGET_RECOVERY_ROOT_OUT)
include $(BUILD_SYSTEM)/base_rules.mk
$(LOCAL_BUILT_MODULE): $(built_nonplat_pc)
$(hide) cp -f $< $@
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := plat_service_contexts
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
ifeq ($(PRODUCT_FULL_TREBLE),true)
LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux
else
LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
endif
include $(BUILD_SYSTEM)/base_rules.mk
plat_svcfiles := $(call build_policy, service_contexts, $(PLAT_PRIVATE_POLICY))
plat_service_contexts.tmp := $(intermediates)/plat_service_contexts.tmp
$(plat_service_contexts.tmp): PRIVATE_SVC_FILES := $(plat_svcfiles)
$(plat_service_contexts.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS)
$(plat_service_contexts.tmp): $(plat_svcfiles)
@mkdir -p $(dir $@)
$(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_SVC_FILES) > $@
$(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy)
$(LOCAL_BUILT_MODULE): $(plat_service_contexts.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/checkfc $(ACP)
@mkdir -p $(dir $@)
sed -e 's/#.*$$//' -e '/^$$/d' $< > $@
$(HOST_OUT_EXECUTABLES)/checkfc -s $(PRIVATE_SEPOLICY) $@
built_plat_svc := $(LOCAL_BUILT_MODULE)
plat_svcfiles :=
plat_service_contexts.tmp :=
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := nonplat_service_contexts
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
ifeq ($(PRODUCT_FULL_TREBLE),true)
LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux
else
LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
endif
include $(BUILD_SYSTEM)/base_rules.mk
nonplat_svcfiles := $(call build_policy, service_contexts, $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS) $(REQD_MASK_POLICY))
nonplat_service_contexts.tmp := $(intermediates)/nonplat_service_contexts.tmp
$(nonplat_service_contexts.tmp): PRIVATE_SVC_FILES := $(nonplat_svcfiles)
$(nonplat_service_contexts.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS)
$(nonplat_service_contexts.tmp): $(nonplat_svcfiles)
@mkdir -p $(dir $@)
$(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_SVC_FILES) > $@
$(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy)
$(LOCAL_BUILT_MODULE): $(nonplat_service_contexts.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/checkfc $(ACP)
@mkdir -p $(dir $@)
sed -e 's/#.*$$//' -e '/^$$/d' $< > $@
$(hide) $(HOST_OUT_EXECUTABLES)/checkfc -s $(PRIVATE_SEPOLICY) $@
built_nonplat_svc := $(LOCAL_BUILT_MODULE)
nonplat_svcfiles :=
nonplat_service_contexts.tmp :=
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := plat_hwservice_contexts
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
ifeq ($(PRODUCT_FULL_TREBLE),true)
LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux
else
LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
endif
include $(BUILD_SYSTEM)/base_rules.mk
plat_hwsvcfiles := $(call build_policy, hwservice_contexts, $(PLAT_PRIVATE_POLICY))
plat_hwservice_contexts.tmp := $(intermediates)/plat_hwservice_contexts.tmp
$(plat_hwservice_contexts.tmp): PRIVATE_SVC_FILES := $(plat_hwsvcfiles)
$(plat_hwservice_contexts.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS)
$(plat_hwservice_contexts.tmp): $(plat_hwsvcfiles)
@mkdir -p $(dir $@)
$(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_SVC_FILES) > $@
$(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy)
$(LOCAL_BUILT_MODULE): $(plat_hwservice_contexts.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/checkfc $(ACP)
@mkdir -p $(dir $@)
sed -e 's/#.*$$//' -e '/^$$/d' $< > $@
$(HOST_OUT_EXECUTABLES)/checkfc -e -l $(PRIVATE_SEPOLICY) $@
plat_hwsvcfiles :=
plat_hwservice_contexts.tmp :=
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := nonplat_hwservice_contexts
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
ifeq ($(PRODUCT_FULL_TREBLE),true)
LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux
else
LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
endif
include $(BUILD_SYSTEM)/base_rules.mk
nonplat_hwsvcfiles := $(call build_policy, hwservice_contexts, $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS) $(REQD_MASK_POLICY))
nonplat_hwservice_contexts.tmp := $(intermediates)/nonplat_hwservice_contexts.tmp
$(nonplat_hwservice_contexts.tmp): PRIVATE_SVC_FILES := $(nonplat_hwsvcfiles)
$(nonplat_hwservice_contexts.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS)
$(nonplat_hwservice_contexts.tmp): $(nonplat_hwsvcfiles)
@mkdir -p $(dir $@)
$(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_SVC_FILES) > $@
$(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy)
$(LOCAL_BUILT_MODULE): $(nonplat_hwservice_contexts.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/checkfc $(ACP)
@mkdir -p $(dir $@)
sed -e 's/#.*$$//' -e '/^$$/d' $< > $@
$(hide) $(HOST_OUT_EXECUTABLES)/checkfc -e -l $(PRIVATE_SEPOLICY) $@
nonplat_hwsvcfiles :=
nonplat_hwservice_contexts.tmp :=
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := vndservice_contexts
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
ifeq ($(PRODUCT_FULL_TREBLE),true)
LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux
else
LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
endif
include $(BUILD_SYSTEM)/base_rules.mk
vnd_svcfiles := $(call build_policy, vndservice_contexts, $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS) $(REQD_MASK_POLICY))
vndservice_contexts.tmp := $(intermediates)/vndservice_contexts.tmp
$(vndservice_contexts.tmp): PRIVATE_SVC_FILES := $(vnd_svcfiles)
$(vndservice_contexts.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS)
$(vndservice_contexts.tmp): $(vnd_svcfiles)
@mkdir -p $(dir $@)
$(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $(PRIVATE_SVC_FILES) > $@
$(LOCAL_BUILT_MODULE): PRIVATE_SEPOLICY := $(built_sepolicy)
$(LOCAL_BUILT_MODULE): $(vndservice_contexts.tmp) $(built_sepolicy) $(HOST_OUT_EXECUTABLES)/checkfc $(ACP)
@mkdir -p $(dir $@)
sed -e 's/#.*$$//' -e '/^$$/d' $< > $@
$(hide) $(HOST_OUT_EXECUTABLES)/checkfc -e -v $(PRIVATE_SEPOLICY) $@
vnd_svcfiles :=
vndservice_contexts.tmp :=
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := plat_mac_permissions.xml
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/selinux
include $(BUILD_SYSTEM)/base_rules.mk
# Build keys.conf
plat_mac_perms_keys.tmp := $(intermediates)/plat_keys.tmp
$(plat_mac_perms_keys.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS)
$(plat_mac_perms_keys.tmp): $(call build_policy, keys.conf, $(PLAT_PRIVATE_POLICY))
@mkdir -p $(dir $@)
$(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $^ > $@
all_plat_mac_perms_files := $(call build_policy, mac_permissions.xml, $(PLAT_PRIVATE_POLICY))
# Should be synced with keys.conf.
all_plat_keys := platform media shared testkey
all_plat_keys := $(all_keys:%=$(dir $(DEFAULT_SYSTEM_DEV_CERTIFICATE))/%.x509.pem)
$(LOCAL_BUILT_MODULE): PRIVATE_MAC_PERMS_FILES := $(all_plat_mac_perms_files)
$(LOCAL_BUILT_MODULE): $(plat_mac_perms_keys.tmp) $(HOST_OUT_EXECUTABLES)/insertkeys.py \
$(all_plat_mac_perms_files) $(all_plat_keys)
@mkdir -p $(dir $@)
$(hide) DEFAULT_SYSTEM_DEV_CERTIFICATE="$(dir $(DEFAULT_SYSTEM_DEV_CERTIFICATE))" \
$(HOST_OUT_EXECUTABLES)/insertkeys.py -t $(TARGET_BUILD_VARIANT) -c $(TOP) $< -o $@ $(PRIVATE_MAC_PERMS_FILES)
all_mac_perms_files :=
all_plat_keys :=
plat_mac_perms_keys.tmp :=
##################################
include $(CLEAR_VARS)
LOCAL_MODULE := nonplat_mac_permissions.xml
LOCAL_MODULE_CLASS := ETC
LOCAL_MODULE_TAGS := optional
LOCAL_MODULE_PATH := $(TARGET_OUT_VENDOR)/etc/selinux
include $(BUILD_SYSTEM)/base_rules.mk
# Build keys.conf
nonplat_mac_perms_keys.tmp := $(intermediates)/nonplat_keys.tmp
$(nonplat_mac_perms_keys.tmp): PRIVATE_ADDITIONAL_M4DEFS := $(LOCAL_ADDITIONAL_M4DEFS)
$(nonplat_mac_perms_keys.tmp): $(call build_policy, keys.conf, $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS) $(REQD_MASK_POLICY))
@mkdir -p $(dir $@)
$(hide) m4 -s $(PRIVATE_ADDITIONAL_M4DEFS) $^ > $@
all_nonplat_mac_perms_files := $(call build_policy, mac_permissions.xml, $(PLAT_VENDOR_POLICY) $(BOARD_SEPOLICY_DIRS) $(REQD_MASK_POLICY))
$(LOCAL_BUILT_MODULE): PRIVATE_MAC_PERMS_FILES := $(all_nonplat_mac_perms_files)
$(LOCAL_BUILT_MODULE): $(nonplat_mac_perms_keys.tmp) $(HOST_OUT_EXECUTABLES)/insertkeys.py \
$(all_nonplat_mac_perms_files)
@mkdir -p $(dir $@)
$(hide) $(HOST_OUT_EXECUTABLES)/insertkeys.py -t $(TARGET_BUILD_VARIANT) -c $(TOP) $< -o $@ $(PRIVATE_MAC_PERMS_FILES)
nonplat_mac_perms_keys.tmp :=
all_nonplat_mac_perms_files :=
##################################
add_nl :=
build_device_policy :=
build_policy :=
built_plat_fc :=
built_nonplat_fc :=
built_nl :=
built_plat_cil :=
built_mapping_cil :=
built_plat_pc :=
built_nonplat_cil :=
built_nonplat_pc :=
built_nonplat_sc :=
built_plat_sc :=
built_precompiled_sepolicy :=
built_sepolicy :=
built_plat_svc :=
built_nonplat_svc :=
mapping_policy_nvr :=
my_target_arch :=
nonplat_policy_nvr :=
plat_policy_nvr :=
plat_pub_policy.cil :=
reqd_policy_mask.cil :=
sepolicy_build_files :=
sepolicy_build_cil_workaround_files :=
with_asan :=
include $(call all-makefiles-under,$(LOCAL_PATH))