Merge "Upgrade to pcre-3.87 (2015-04-28)."
diff --git a/dist/AUTHORS b/dist/AUTHORS
index 5eee1af..d33723f 100644
--- a/dist/AUTHORS
+++ b/dist/AUTHORS
@@ -8,7 +8,7 @@
University of Cambridge Computing Service,
Cambridge, England.
-Copyright (c) 1997-2014 University of Cambridge
+Copyright (c) 1997-2015 University of Cambridge
All rights reserved
@@ -19,7 +19,7 @@
Email local part: hzmester
Emain domain: freemail.hu
-Copyright(c) 2010-2014 Zoltan Herczeg
+Copyright(c) 2010-2015 Zoltan Herczeg
All rights reserved.
@@ -30,7 +30,7 @@
Email local part: hzmester
Emain domain: freemail.hu
-Copyright(c) 2009-2014 Zoltan Herczeg
+Copyright(c) 2009-2015 Zoltan Herczeg
All rights reserved.
diff --git a/dist/ChangeLog b/dist/ChangeLog
index 8abdfb5..359b412 100644
--- a/dist/ChangeLog
+++ b/dist/ChangeLog
@@ -1,6 +1,173 @@
ChangeLog for PCRE
------------------
+Version 8.37 28-April-2015
+--------------------------
+
+1. When an (*ACCEPT) is triggered inside capturing parentheses, it arranges
+ for those parentheses to be closed with whatever has been captured so far.
+ However, it was failing to mark any other groups between the hightest
+ capture so far and the currrent group as "unset". Thus, the ovector for
+ those groups contained whatever was previously there. An example is the
+ pattern /(x)|((*ACCEPT))/ when matched against "abcd".
+
+2. If an assertion condition was quantified with a minimum of zero (an odd
+ thing to do, but it happened), SIGSEGV or other misbehaviour could occur.
+
+3. If a pattern in pcretest input had the P (POSIX) modifier followed by an
+ unrecognized modifier, a crash could occur.
+
+4. An attempt to do global matching in pcretest with a zero-length ovector
+ caused a crash.
+
+5. Fixed a memory leak during matching that could occur for a subpattern
+ subroutine call (recursive or otherwise) if the number of captured groups
+ that had to be saved was greater than ten.
+
+6. Catch a bad opcode during auto-possessification after compiling a bad UTF
+ string with NO_UTF_CHECK. This is a tidyup, not a bug fix, as passing bad
+ UTF with NO_UTF_CHECK is documented as having an undefined outcome.
+
+7. A UTF pattern containing a "not" match of a non-ASCII character and a
+ subroutine reference could loop at compile time. Example: /[^\xff]((?1))/.
+
+8. When a pattern is compiled, it remembers the highest back reference so that
+ when matching, if the ovector is too small, extra memory can be obtained to
+ use instead. A conditional subpattern whose condition is a check on a
+ capture having happened, such as, for example in the pattern
+ /^(?:(a)|b)(?(1)A|B)/, is another kind of back reference, but it was not
+ setting the highest backreference number. This mattered only if pcre_exec()
+ was called with an ovector that was too small to hold the capture, and there
+ was no other kind of back reference (a situation which is probably quite
+ rare). The effect of the bug was that the condition was always treated as
+ FALSE when the capture could not be consulted, leading to a incorrect
+ behaviour by pcre_exec(). This bug has been fixed.
+
+9. A reference to a duplicated named group (either a back reference or a test
+ for being set in a conditional) that occurred in a part of the pattern where
+ PCRE_DUPNAMES was not set caused the amount of memory needed for the pattern
+ to be incorrectly calculated, leading to overwriting.
+
+10. A mutually recursive set of back references such as (\2)(\1) caused a
+ segfault at study time (while trying to find the minimum matching length).
+ The infinite loop is now broken (with the minimum length unset, that is,
+ zero).
+
+11. If an assertion that was used as a condition was quantified with a minimum
+ of zero, matching went wrong. In particular, if the whole group had
+ unlimited repetition and could match an empty string, a segfault was
+ likely. The pattern (?(?=0)?)+ is an example that caused this. Perl allows
+ assertions to be quantified, but not if they are being used as conditions,
+ so the above pattern is faulted by Perl. PCRE has now been changed so that
+ it also rejects such patterns.
+
+12. A possessive capturing group such as (a)*+ with a minimum repeat of zero
+ failed to allow the zero-repeat case if pcre2_exec() was called with an
+ ovector too small to capture the group.
+
+13. Fixed two bugs in pcretest that were discovered by fuzzing and reported by
+ Red Hat Product Security:
+
+ (a) A crash if /K and /F were both set with the option to save the compiled
+ pattern.
+
+ (b) Another crash if the option to print captured substrings in a callout
+ was combined with setting a null ovector, for example \O\C+ as a subject
+ string.
+
+14. A pattern such as "((?2){0,1999}())?", which has a group containing a
+ forward reference repeated a large (but limited) number of times within a
+ repeated outer group that has a zero minimum quantifier, caused incorrect
+ code to be compiled, leading to the error "internal error:
+ previously-checked referenced subpattern not found" when an incorrect
+ memory address was read. This bug was reported as "heap overflow",
+ discovered by Kai Lu of Fortinet's FortiGuard Labs and given the CVE number
+ CVE-2015-2325.
+
+23. A pattern such as "((?+1)(\1))/" containing a forward reference subroutine
+ call within a group that also contained a recursive back reference caused
+ incorrect code to be compiled. This bug was reported as "heap overflow",
+ discovered by Kai Lu of Fortinet's FortiGuard Labs, and given the CVE
+ number CVE-2015-2326.
+
+24. Computing the size of the JIT read-only data in advance has been a source
+ of various issues, and new ones are still appear unfortunately. To fix
+ existing and future issues, size computation is eliminated from the code,
+ and replaced by on-demand memory allocation.
+
+25. A pattern such as /(?i)[A-`]/, where characters in the other case are
+ adjacent to the end of the range, and the range contained characters with
+ more than one other case, caused incorrect behaviour when compiled in UTF
+ mode. In that example, the range a-j was left out of the class.
+
+26. Fix JIT compilation of conditional blocks, which assertion
+ is converted to (*FAIL). E.g: /(?(?!))/.
+
+27. The pattern /(?(?!)^)/ caused references to random memory. This bug was
+ discovered by the LLVM fuzzer.
+
+28. The assertion (?!) is optimized to (*FAIL). This was not handled correctly
+ when this assertion was used as a condition, for example (?(?!)a|b). In
+ pcre2_match() it worked by luck; in pcre2_dfa_match() it gave an incorrect
+ error about an unsupported item.
+
+29. For some types of pattern, for example /Z*(|d*){216}/, the auto-
+ possessification code could take exponential time to complete. A recursion
+ depth limit of 1000 has been imposed to limit the resources used by this
+ optimization.
+
+30. A pattern such as /(*UTF)[\S\V\H]/, which contains a negated special class
+ such as \S in non-UCP mode, explicit wide characters (> 255) can be ignored
+ because \S ensures they are all in the class. The code for doing this was
+ interacting badly with the code for computing the amount of space needed to
+ compile the pattern, leading to a buffer overflow. This bug was discovered
+ by the LLVM fuzzer.
+
+31. A pattern such as /((?2)+)((?1))/ which has mutual recursion nested inside
+ other kinds of group caused stack overflow at compile time. This bug was
+ discovered by the LLVM fuzzer.
+
+32. A pattern such as /(?1)(?#?'){8}(a)/ which had a parenthesized comment
+ between a subroutine call and its quantifier was incorrectly compiled,
+ leading to buffer overflow or other errors. This bug was discovered by the
+ LLVM fuzzer.
+
+33. The illegal pattern /(?(?<E>.*!.*)?)/ was not being diagnosed as missing an
+ assertion after (?(. The code was failing to check the character after
+ (?(?< for the ! or = that would indicate a lookbehind assertion. This bug
+ was discovered by the LLVM fuzzer.
+
+34. A pattern such as /X((?2)()*+){2}+/ which has a possessive quantifier with
+ a fixed maximum following a group that contains a subroutine reference was
+ incorrectly compiled and could trigger buffer overflow. This bug was
+ discovered by the LLVM fuzzer.
+
+35. A mutual recursion within a lookbehind assertion such as (?<=((?2))((?1)))
+ caused a stack overflow instead of the diagnosis of a non-fixed length
+ lookbehind assertion. This bug was discovered by the LLVM fuzzer.
+
+36. The use of \K in a positive lookbehind assertion in a non-anchored pattern
+ (e.g. /(?<=\Ka)/) could make pcregrep loop.
+
+37. There was a similar problem to 36 in pcretest for global matches.
+
+38. If a greedy quantified \X was preceded by \C in UTF mode (e.g. \C\X*),
+ and a subsequent item in the pattern caused a non-match, backtracking over
+ the repeated \X did not stop, but carried on past the start of the subject,
+ causing reference to random memory and/or a segfault. There were also some
+ other cases where backtracking after \C could crash. This set of bugs was
+ discovered by the LLVM fuzzer.
+
+39. The function for finding the minimum length of a matching string could take
+ a very long time if mutual recursion was present many times in a pattern,
+ for example, /((?2){73}(?2))((?1))/. A better mutual recursion detection
+ method has been implemented. This infelicity was discovered by the LLVM
+ fuzzer.
+
+40. Static linking against the PCRE library using the pkg-config module was
+ failing on missing pthread symbols.
+
+
Version 8.36 26-September-2014
------------------------------
diff --git a/dist/LICENCE b/dist/LICENCE
index 602e4ae..9f6f98e 100644
--- a/dist/LICENCE
+++ b/dist/LICENCE
@@ -6,7 +6,8 @@
Release 8 of PCRE is distributed under the terms of the "BSD" licence, as
specified below. The documentation for PCRE, supplied in the "doc"
-directory, is distributed under the same terms as the software itself.
+directory, is distributed under the same terms as the software itself. The data
+in the testdata directory is not copyrighted and is in the public domain.
The basic library functions are written in C and are freestanding. Also
included in the distribution is a set of C++ wrapper functions, and a
@@ -24,7 +25,7 @@
University of Cambridge Computing Service,
Cambridge, England.
-Copyright (c) 1997-2014 University of Cambridge
+Copyright (c) 1997-2015 University of Cambridge
All rights reserved.
@@ -35,7 +36,7 @@
Email local part: hzmester
Emain domain: freemail.hu
-Copyright(c) 2010-2014 Zoltan Herczeg
+Copyright(c) 2010-2015 Zoltan Herczeg
All rights reserved.
@@ -46,7 +47,7 @@
Email local part: hzmester
Emain domain: freemail.hu
-Copyright(c) 2009-2014 Zoltan Herczeg
+Copyright(c) 2009-2015 Zoltan Herczeg
All rights reserved.
diff --git a/dist/Makefile.in b/dist/Makefile.in
index b1a36cc..c2a4530 100644
--- a/dist/Makefile.in
+++ b/dist/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -19,7 +19,17 @@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
@@ -151,18 +161,6 @@
@WITH_PCRE32_TRUE@am__append_44 = libpcre32.pc
@WITH_PCRE_CPP_TRUE@am__append_45 = libpcrecpp.pc
subdir = .
-DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
- $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/configure $(am__configure_deps) \
- $(srcdir)/config.h.in $(srcdir)/libpcre.pc.in \
- $(srcdir)/libpcre16.pc.in $(srcdir)/libpcre32.pc.in \
- $(srcdir)/libpcreposix.pc.in $(srcdir)/libpcrecpp.pc.in \
- $(srcdir)/pcre-config.in $(srcdir)/pcre.h.in \
- $(srcdir)/pcre_stringpiece.h.in $(srcdir)/pcrecpparg.h.in \
- $(am__dist_noinst_SCRIPTS_DIST) depcomp $(dist_man_MANS) \
- $(dist_doc_DATA) $(dist_html_DATA) $(dist_noinst_DATA) \
- $(am__include_HEADERS_DIST) test-driver COPYING ar-lib compile \
- config.guess config.sub install-sh missing ltmain.sh
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_pthread.m4 \
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
@@ -171,6 +169,10 @@
$(top_srcdir)/m4/pcre_visibility.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps) $(am__dist_noinst_SCRIPTS_DIST) \
+ $(dist_doc_DATA) $(dist_html_DATA) $(dist_noinst_DATA) \
+ $(am__include_HEADERS_DIST) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
@@ -722,6 +724,15 @@
TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
$(TEST_LOG_FLAGS)
+am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \
+ $(srcdir)/config.h.in $(srcdir)/libpcre.pc.in \
+ $(srcdir)/libpcre16.pc.in $(srcdir)/libpcre32.pc.in \
+ $(srcdir)/libpcrecpp.pc.in $(srcdir)/libpcreposix.pc.in \
+ $(srcdir)/pcre-config.in $(srcdir)/pcre.h.in \
+ $(srcdir)/pcre_stringpiece.h.in $(srcdir)/pcrecpparg.h.in \
+ AUTHORS COPYING ChangeLog INSTALL NEWS README ar-lib compile \
+ config.guess config.sub depcomp install-sh ltmain.sh missing \
+ test-driver
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
@@ -798,6 +809,7 @@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
@@ -1326,7 +1338,6 @@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
@@ -2613,7 +2624,7 @@
if test -n "$$am__remaking_logs"; then \
echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
"recursion detected" >&2; \
- else \
+ elif test -n "$$redo_logs"; then \
am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
fi; \
if $(am__make_dryrun); then :; else \
@@ -2836,15 +2847,15 @@
$(am__post_remove_distdir)
dist-tarZ: distdir
- @echo WARNING: "Support for shar distribution archives is" \
- "deprecated." >&2
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
- @echo WARNING: "Support for distribution archives compressed with" \
- "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)
@@ -2879,17 +2890,17 @@
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
- mkdir $(distdir)/_build $(distdir)/_inst
+ mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
- && ../configure \
+ && $(am__cd) $(distdir)/_build/sub \
+ && ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
- --srcdir=.. --prefix="$$dc_install_base" \
+ --srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
@@ -3110,6 +3121,8 @@
uninstall-man3 uninstall-nodist_includeHEADERS \
uninstall-pkgconfigDATA
+.PRECIOUS: Makefile
+
# The only difference between pcre.h.in and pcre.h is the setting of the PCRE
# version number. Therefore, we can create the generic version just by copying.
diff --git a/dist/NEWS b/dist/NEWS
index 5b8c60c..064bf27 100644
--- a/dist/NEWS
+++ b/dist/NEWS
@@ -1,6 +1,14 @@
News about PCRE releases
------------------------
+Release 8.37 28-April-2015
+--------------------------
+
+This is bug-fix release. Note that this library (now called PCRE1) is now being
+maintained for bug fixes only. New projects are advised to use the new PCRE2
+libraries.
+
+
Release 8.36 26-September-2014
------------------------------
diff --git a/dist/NON-AUTOTOOLS-BUILD b/dist/NON-AUTOTOOLS-BUILD
index cddf3e0..1c3da84 100644
--- a/dist/NON-AUTOTOOLS-BUILD
+++ b/dist/NON-AUTOTOOLS-BUILD
@@ -1,6 +1,14 @@
Building PCRE without using autotools
-------------------------------------
+NOTE: This document relates to PCRE releases that use the original API, with
+library names libpcre, libpcre16, and libpcre32. January 2015 saw the first
+release of a new API, known as PCRE2, with release numbers starting at 10.00
+and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old libraries
+(now called PCRE1) are still being maintained for bug fixes, but there will be
+no new development. New projects are advised to use the new PCRE2 libraries.
+
+
This document contains the following sections:
General
@@ -761,4 +769,4 @@
http://www.vsoft-software.com/downloads.html
==========================
-Last Updated: 14 May 2013
+Last Updated: 10 February 2015
diff --git a/dist/README b/dist/README
index e30bd0f..4887ebf 100644
--- a/dist/README
+++ b/dist/README
@@ -1,7 +1,16 @@
README file for PCRE (Perl-compatible regular expression library)
-----------------------------------------------------------------
-The latest release of PCRE is always available in three alternative formats
+NOTE: This set of files relates to PCRE releases that use the original API,
+with library names libpcre, libpcre16, and libpcre32. January 2015 saw the
+first release of a new API, known as PCRE2, with release numbers starting at
+10.00 and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old
+libraries (now called PCRE1) are still being maintained for bug fixes, but
+there will be no new development. New projects are advised to use the new PCRE2
+libraries.
+
+
+The latest release of PCRE1 is always available in three alternative formats
from:
ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-xxx.tar.gz
@@ -990,4 +999,4 @@
Philip Hazel
Email local part: ph10
Email domain: cam.ac.uk
-Last updated: 24 October 2014
+Last updated: 10 February 2015
diff --git a/dist/RunGrepTest b/dist/RunGrepTest
index f1b0348..62e2a9b 100755
--- a/dist/RunGrepTest
+++ b/dist/RunGrepTest
@@ -506,6 +506,11 @@
(cd $srcdir; echo "a" | $valgrind $pcregrep -M "|a" ) >>testtrygrep 2>&1
echo "RC=$?" >>testtrygrep
+echo "---------------------------- Test 107 -----------------------------" >>testtrygrep
+echo "a" >testtemp1grep
+echo "aaaaa" >>testtemp1grep
+(cd $srcdir; $valgrind $pcregrep --line-offsets '(?<=\Ka)' $builddir/testtemp1grep) >>testtrygrep 2>&1
+echo "RC=$?" >>testtrygrep
# Now compare the results.
diff --git a/dist/RunTest.bat b/dist/RunTest.bat
index 8f290f5..35d7f71 100644
--- a/dist/RunTest.bat
+++ b/dist/RunTest.bat
@@ -1,616 +1,616 @@
-@echo off
-@rem This file must use CRLF linebreaks to function properly
-@rem and requires both pcretest and pcregrep
-@rem This file was originally contributed by Ralf Junker, and touched up by
-@rem Daniel Richard G. Tests 10-12 added by Philip H.
-@rem Philip H also changed test 3 to use "wintest" files.
-@rem
-@rem Updated by Tom Fortmann to support explicit test numbers on the command line.
-@rem Added argument validation and added error reporting.
-@rem
-@rem MS Windows batch file to run pcretest on testfiles with the correct
-@rem options.
-@rem
-@rem Sheri Pierce added logic to skip feature dependent tests
-@rem tests 4 5 9 15 and 18 require utf support
-@rem tests 6 7 10 16 and 19 require ucp support
-@rem 11 requires ucp and link size 2
-@rem 12 requires presence of jit support
-@rem 13 requires absence of jit support
-@rem Sheri P also added override tests for study and jit testing
-@rem Zoltan Herczeg added libpcre16 support
-@rem Zoltan Herczeg added libpcre32 support
-
-setlocal enabledelayedexpansion
-if [%srcdir%]==[] (
-if exist testdata\ set srcdir=.)
-if [%srcdir%]==[] (
-if exist ..\testdata\ set srcdir=..)
-if [%srcdir%]==[] (
-if exist ..\..\testdata\ set srcdir=..\..)
-if NOT exist %srcdir%\testdata\ (
-Error: echo distribution testdata folder not found!
-call :conferror
-exit /b 1
-goto :eof
-)
-
-if [%pcretest%]==[] set pcretest=.\pcretest.exe
-
-echo source dir is %srcdir%
-echo pcretest=%pcretest%
-
-if NOT exist %pcretest% (
-echo Error: %pcretest% not found!
-echo.
-call :conferror
-exit /b 1
-)
-
-%pcretest% -C linksize >NUL
-set link_size=%ERRORLEVEL%
-%pcretest% -C pcre8 >NUL
-set support8=%ERRORLEVEL%
-%pcretest% -C pcre16 >NUL
-set support16=%ERRORLEVEL%
-%pcretest% -C pcre32 >NUL
-set support32=%ERRORLEVEL%
-%pcretest% -C utf >NUL
-set utf=%ERRORLEVEL%
-%pcretest% -C ucp >NUL
-set ucp=%ERRORLEVEL%
-%pcretest% -C jit >NUL
-set jit=%ERRORLEVEL%
-
-if %support8% EQU 1 (
-if not exist testout8 md testout8
-if not exist testoutstudy8 md testoutstudy8
-if not exist testoutjit8 md testoutjit8
-)
-
-if %support16% EQU 1 (
-if not exist testout16 md testout16
-if not exist testoutstudy16 md testoutstudy16
-if not exist testoutjit16 md testoutjit16
-)
-
-if %support16% EQU 1 (
-if not exist testout32 md testout32
-if not exist testoutstudy32 md testoutstudy32
-if not exist testoutjit32 md testoutjit32
-)
-
-set do1=no
-set do2=no
-set do3=no
-set do4=no
-set do5=no
-set do6=no
-set do7=no
-set do8=no
-set do9=no
-set do10=no
-set do11=no
-set do12=no
-set do13=no
-set do14=no
-set do15=no
-set do16=no
-set do17=no
-set do18=no
-set do19=no
-set do20=no
-set do21=no
-set do22=no
-set do23=no
-set do24=no
-set do25=no
-set do26=no
-set all=yes
-
-for %%a in (%*) do (
- set valid=no
- for %%v in (1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26) do if %%v == %%a set valid=yes
- if "!valid!" == "yes" (
- set do%%a=yes
- set all=no
-) else (
- echo Invalid test number - %%a!
- echo Usage %0 [ test_number ] ...
- echo Where test_number is one or more optional test numbers 1 through 26, default is all tests.
- exit /b 1
-)
-)
-set failed="no"
-
-if "%all%" == "yes" (
- set do1=yes
- set do2=yes
- set do3=yes
- set do4=yes
- set do5=yes
- set do6=yes
- set do7=yes
- set do8=yes
- set do9=yes
- set do10=yes
- set do11=yes
- set do12=yes
- set do13=yes
- set do14=yes
- set do15=yes
- set do16=yes
- set do17=yes
- set do18=yes
- set do19=yes
- set do20=yes
- set do21=yes
- set do22=yes
- set do23=yes
- set do24=yes
- set do25=yes
- set do26=yes
-)
-
-@echo RunTest.bat's pcretest output is written to newly created subfolders named
-@echo testout, testoutstudy and testoutjit.
-@echo.
-
-set mode=
-set bits=8
-
-:nextMode
-if "%mode%" == "" (
- if %support8% EQU 0 goto modeSkip
- echo.
- echo ---- Testing 8-bit library ----
- echo.
-)
-if "%mode%" == "-16" (
- if %support16% EQU 0 goto modeSkip
- echo.
- echo ---- Testing 16-bit library ----
- echo.
-)
-if "%mode%" == "-32" (
- if %support32% EQU 0 goto modeSkip
- echo.
- echo ---- Testing 32-bit library ----
- echo.
-)
-if "%do1%" == "yes" call :do1
-if "%do2%" == "yes" call :do2
-if "%do3%" == "yes" call :do3
-if "%do4%" == "yes" call :do4
-if "%do5%" == "yes" call :do5
-if "%do6%" == "yes" call :do6
-if "%do7%" == "yes" call :do7
-if "%do8%" == "yes" call :do8
-if "%do9%" == "yes" call :do9
-if "%do10%" == "yes" call :do10
-if "%do11%" == "yes" call :do11
-if "%do12%" == "yes" call :do12
-if "%do13%" == "yes" call :do13
-if "%do14%" == "yes" call :do14
-if "%do15%" == "yes" call :do15
-if "%do16%" == "yes" call :do16
-if "%do17%" == "yes" call :do17
-if "%do18%" == "yes" call :do18
-if "%do19%" == "yes" call :do19
-if "%do20%" == "yes" call :do20
-if "%do21%" == "yes" call :do21
-if "%do22%" == "yes" call :do22
-if "%do23%" == "yes" call :do23
-if "%do24%" == "yes" call :do24
-if "%do25%" == "yes" call :do25
-if "%do26%" == "yes" call :do26
-:modeSkip
-if "%mode%" == "" (
- set mode=-16
- set bits=16
- goto nextMode
-)
-if "%mode%" == "-16" (
- set mode=-32
- set bits=32
- goto nextMode
-)
-
-@rem If mode is -32, testing is finished
-if %failed% == "yes" (
-echo In above output, one or more of the various tests failed!
-exit /b 1
-)
-echo All OK
-goto :eof
-
-:runsub
-@rem Function to execute pcretest and compare the output
-@rem Arguments are as follows:
-@rem
-@rem 1 = test number
-@rem 2 = outputdir
-@rem 3 = test name use double quotes
-@rem 4 - 9 = pcretest options
-
-if [%1] == [] (
- echo Missing test number argument!
- exit /b 1
-)
-
-if [%2] == [] (
- echo Missing outputdir!
- exit /b 1
-)
-
-if [%3] == [] (
- echo Missing test name argument!
- exit /b 1
-)
-
-set testinput=testinput%1
-set testoutput=testoutput%1
-if exist %srcdir%\testdata\win%testinput% (
- set testinput=wintestinput%1
- set testoutput=wintestoutput%1
-)
-
-echo Test %1: %3
-%pcretest% %mode% %4 %5 %6 %7 %8 %9 %srcdir%\testdata\%testinput% >%2%bits%\%testoutput%
-if errorlevel 1 (
- echo. failed executing command-line:
- echo. %pcretest% %mode% %4 %5 %6 %7 %8 %9 %srcdir%\testdata\%testinput% ^>%2%bits%\%testoutput%
- set failed="yes"
- goto :eof
-)
-
-set type=
-if [%1]==[11] (
- set type=-%bits%
-)
-if [%1]==[18] (
- set type=-%bits%
-)
-if [%1]==[21] (
- set type=-%bits%
-)
-if [%1]==[22] (
- set type=-%bits%
-)
-
-fc /n %srcdir%\testdata\%testoutput%%type% %2%bits%\%testoutput% >NUL
-
-if errorlevel 1 (
- echo. failed comparison: fc /n %srcdir%\testdata\%testoutput% %2%bits%\%testoutput%
- if [%1]==[2] (
- echo.
- echo ** Test 2 requires a lot of stack. PCRE can be configured to
- echo ** use heap for recursion. Otherwise, to pass Test 2
- echo ** you generally need to allocate 8 mb stack to PCRE.
- echo ** See the 'pcrestack' page for a discussion of PCRE's
- echo ** stack usage.
- echo.
-)
- if [%1]==[3] (
- echo.
- echo ** Test 3 failure usually means french locale is not
- echo ** available on the system, rather than a bug or problem with PCRE.
- echo.
- goto :eof
-)
-
- set failed="yes"
- goto :eof
-)
-
-echo. Passed.
-goto :eof
-
-:do1
-call :runsub 1 testout "Main functionality (Compatible with Perl >= 5.10)" -q
-call :runsub 1 testoutstudy "Test with Study Override" -q -s
-if %jit% EQU 1 call :runsub 1 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do2
- call :runsub 2 testout "API, errors, internals, and non-Perl stuff" -q
- call :runsub 2 testoutstudy "Test with Study Override" -q -s
- if %jit% EQU 1 call :runsub 2 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do3
- call :runsub 3 testout "Locale-specific features" -q
- call :runsub 3 testoutstudy "Test with Study Override" -q -s
- if %jit% EQU 1 call :runsub 3 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do4
-if %utf% EQU 0 (
- echo Test 4 Skipped due to absence of UTF-%bits% support.
- goto :eof
-)
- call :runsub 4 testout "UTF-%bits% support - (Compatible with Perl >= 5.10)" -q
- call :runsub 4 testoutstudy "Test with Study Override" -q -s
- if %jit% EQU 1 call :runsub 4 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do5
-if %utf% EQU 0 (
- echo Test 5 Skipped due to absence of UTF-%bits% support.
- goto :eof
-)
- call :runsub 5 testout "API, internals, and non-Perl stuff for UTF-%bits%" -q
- call :runsub 5 testoutstudy "Test with Study Override" -q -s
- if %jit% EQU 1 call :runsub 5 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do6
-if %ucp% EQU 0 (
- echo Test 6 Skipped due to absence of Unicode property support.
- goto :eof
-)
- call :runsub 6 testout "Unicode property support (Compatible with Perl >= 5.10)" -q
- call :runsub 6 testoutstudy "Test with Study Override" -q -s
- if %jit% EQU 1 call :runsub 6 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do7
-if %ucp% EQU 0 (
- echo Test 7 Skipped due to absence of Unicode property support.
- goto :eof
-)
- call :runsub 7 testout "API, internals, and non-Perl stuff for Unicode property support" -q
- call :runsub 7 testoutstudy "Test with Study Override" -q -s
- if %jit% EQU 1 call :runsub 7 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do8
- call :runsub 8 testout "DFA matching main functionality" -q -dfa
- call :runsub 8 testoutstudy "Test with Study Override" -q -dfa -s
-goto :eof
-
-:do9
-if %utf% EQU 0 (
- echo Test 9 Skipped due to absence of UTF-%bits% support.
- goto :eof
-)
- call :runsub 9 testout "DFA matching with UTF-%bits%" -q -dfa
- call :runsub 9 testoutstudy "Test with Study Override" -q -dfa -s
- goto :eof
-
-:do10
-if %ucp% EQU 0 (
- echo Test 10 Skipped due to absence of Unicode property support.
- goto :eof
-)
- call :runsub 10 testout "DFA matching with Unicode properties" -q -dfa
- call :runsub 10 testoutstudy "Test with Study Override" -q -dfa -s
-goto :eof
-
-:do11
-if NOT %link_size% EQU 2 (
- echo Test 11 Skipped because link size is not 2.
- goto :eof
-)
-if %ucp% EQU 0 (
- echo Test 11 Skipped due to absence of Unicode property support.
- goto :eof
-)
- call :runsub 11 testout "Internal offsets and code size tests" -q
- call :runsub 11 testoutstudy "Test with Study Override" -q -s
-goto :eof
-
-:do12
-if %jit% EQU 0 (
- echo Test 12 Skipped due to absence of JIT support.
- goto :eof
-)
- call :runsub 12 testout "JIT-specific features (JIT available)" -q
-goto :eof
-
-:do13
-if %jit% EQU 1 (
- echo Test 13 Skipped due to presence of JIT support.
- goto :eof
-)
- call :runsub 13 testout "JIT-specific features (JIT not available)" -q
-goto :eof
-
-:do14
-if NOT %bits% EQU 8 (
- echo Test 14 Skipped when running 16/32-bit tests.
- goto :eof
-)
- copy /Y %srcdir%\testdata\saved16 testsaved16
- copy /Y %srcdir%\testdata\saved32 testsaved32
- call :runsub 14 testout "Specials for the basic 8-bit library" -q
- call :runsub 14 testoutstudy "Test with Study Override" -q -s
- if %jit% EQU 1 call :runsub 14 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do15
-if NOT %bits% EQU 8 (
- echo Test 15 Skipped when running 16/32-bit tests.
- goto :eof
-)
-if %utf% EQU 0 (
- echo Test 15 Skipped due to absence of UTF-%bits% support.
- goto :eof
-)
- call :runsub 15 testout "Specials for the 8-bit library with UTF-%bits% support" -q
- call :runsub 15 testoutstudy "Test with Study Override" -q -s
- if %jit% EQU 1 call :runsub 15 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do16
-if NOT %bits% EQU 8 (
- echo Test 16 Skipped when running 16/32-bit tests.
- goto :eof
-)
-if %ucp% EQU 0 (
- echo Test 16 Skipped due to absence of Unicode property support.
- goto :eof
-)
- call :runsub 16 testout "Specials for the 8-bit library with Unicode propery support" -q
- call :runsub 16 testoutstudy "Test with Study Override" -q -s
- if %jit% EQU 1 call :runsub 16 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do17
-if %bits% EQU 8 (
- echo Test 17 Skipped when running 8-bit tests.
- goto :eof
-)
- call :runsub 17 testout "Specials for the basic 16/32-bit library" -q
- call :runsub 17 testoutstudy "Test with Study Override" -q -s
- if %jit% EQU 1 call :runsub 17 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do18
-if %bits% EQU 8 (
- echo Test 18 Skipped when running 8-bit tests.
- goto :eof
-)
-if %utf% EQU 0 (
- echo Test 18 Skipped due to absence of UTF-%bits% support.
- goto :eof
-)
- call :runsub 18 testout "Specials for the 16/32-bit library with UTF-%bits% support" -q
- call :runsub 18 testoutstudy "Test with Study Override" -q -s
- if %jit% EQU 1 call :runsub 18 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do19
-if %bits% EQU 8 (
- echo Test 19 Skipped when running 8-bit tests.
- goto :eof
-)
-if %ucp% EQU 0 (
- echo Test 19 Skipped due to absence of Unicode property support.
- goto :eof
-)
- call :runsub 19 testout "Specials for the 16/32-bit library with Unicode property support" -q
- call :runsub 19 testoutstudy "Test with Study Override" -q -s
- if %jit% EQU 1 call :runsub 19 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do20
-if %bits% EQU 8 (
- echo Test 20 Skipped when running 8-bit tests.
- goto :eof
-)
- call :runsub 20 testout "DFA specials for the basic 16/32-bit library" -q -dfa
- call :runsub 20 testoutstudy "Test with Study Override" -q -dfa -s
-goto :eof
-
-:do21
-if %bits% EQU 8 (
- echo Test 21 Skipped when running 8-bit tests.
- goto :eof
-)
-if NOT %link_size% EQU 2 (
- echo Test 21 Skipped because link size is not 2.
- goto :eof
-)
-copy /Y %srcdir%\testdata\saved8 testsaved8
-copy /Y %srcdir%\testdata\saved16LE-1 testsaved16LE-1
-copy /Y %srcdir%\testdata\saved16BE-1 testsaved16BE-1
-copy /Y %srcdir%\testdata\saved32LE-1 testsaved32LE-1
-copy /Y %srcdir%\testdata\saved32BE-1 testsaved32BE-1
-call :runsub 21 testout "Reloads for the basic 16/32-bit library" -q
-call :runsub 21 testoutstudy "Test with Study Override" -q -s
-if %jit% EQU 1 call :runsub 21 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do22
-if %bits% EQU 8 (
- echo Test 22 Skipped when running 8-bit tests.
- goto :eof
-)
-if %utf% EQU 0 (
- echo Test 22 Skipped due to absence of UTF-%bits% support.
- goto :eof
-)
-if NOT %link_size% EQU 2 (
- echo Test 22 Skipped because link size is not 2.
- goto :eof
-)
-copy /Y %srcdir%\testdata\saved16LE-2 testsaved16LE-2
-copy /Y %srcdir%\testdata\saved16BE-2 testsaved16BE-2
-copy /Y %srcdir%\testdata\saved32LE-2 testsaved32LE-2
-copy /Y %srcdir%\testdata\saved32BE-2 testsaved32BE-2
-call :runsub 22 testout "Reloads for the 16/32-bit library with UTF-16/32 support" -q
-call :runsub 22 testoutstudy "Test with Study Override" -q -s
-if %jit% EQU 1 call :runsub 22 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do23
-if NOT %bits% EQU 16 (
- echo Test 23 Skipped when running 8/32-bit tests.
- goto :eof
-)
-call :runsub 23 testout "Specials for the 16-bit library" -q
-call :runsub 23 testoutstudy "Test with Study Override" -q -s
-if %jit% EQU 1 call :runsub 23 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do24
-if NOT %bits% EQU 16 (
- echo Test 24 Skipped when running 8/32-bit tests.
- goto :eof
-)
-if %utf% EQU 0 (
- echo Test 24 Skipped due to absence of UTF-%bits% support.
- goto :eof
-)
-call :runsub 24 testout "Specials for the 16-bit library with UTF-16 support" -q
-call :runsub 24 testoutstudy "Test with Study Override" -q -s
-if %jit% EQU 1 call :runsub 24 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do25
-if NOT %bits% EQU 32 (
- echo Test 25 Skipped when running 8/16-bit tests.
- goto :eof
-)
-call :runsub 25 testout "Specials for the 32-bit library" -q
-call :runsub 25 testoutstudy "Test with Study Override" -q -s
-if %jit% EQU 1 call :runsub 25 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do26
-if NOT %bits% EQU 32 (
- echo Test 26 Skipped when running 8/16-bit tests.
- goto :eof
-)
-if %utf% EQU 0 (
- echo Test 26 Skipped due to absence of UTF-%bits% support.
- goto :eof
-)
-call :runsub 26 testout "Specials for the 32-bit library with UTF-32 support" -q
-call :runsub 26 testoutstudy "Test with Study Override" -q -s
-if %jit% EQU 1 call :runsub 26 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:conferror
-@echo.
-@echo Either your build is incomplete or you have a configuration error.
-@echo.
-@echo If configured with cmake and executed via "make test" or the MSVC "RUN_TESTS"
-@echo project, pcre_test.bat defines variables and automatically calls RunTest.bat.
-@echo For manual testing of all available features, after configuring with cmake
-@echo and building, you can run the built pcre_test.bat. For best results with
-@echo cmake builds and tests avoid directories with full path names that include
-@echo spaces for source or build.
-@echo.
-@echo Otherwise, if the build dir is in a subdir of the source dir, testdata needed
-@echo for input and verification should be found automatically when (from the
-@echo location of the the built exes) you call RunTest.bat. By default RunTest.bat
-@echo runs all tests compatible with the linked pcre library but it can be given
-@echo a test number as an argument.
-@echo.
-@echo If the build dir is not under the source dir you can either copy your exes
-@echo to the source folder or copy RunTest.bat and the testdata folder to the
-@echo location of your built exes and then run RunTest.bat.
-@echo.
-goto :eof
+@echo off
+@rem This file must use CRLF linebreaks to function properly
+@rem and requires both pcretest and pcregrep
+@rem This file was originally contributed by Ralf Junker, and touched up by
+@rem Daniel Richard G. Tests 10-12 added by Philip H.
+@rem Philip H also changed test 3 to use "wintest" files.
+@rem
+@rem Updated by Tom Fortmann to support explicit test numbers on the command line.
+@rem Added argument validation and added error reporting.
+@rem
+@rem MS Windows batch file to run pcretest on testfiles with the correct
+@rem options.
+@rem
+@rem Sheri Pierce added logic to skip feature dependent tests
+@rem tests 4 5 9 15 and 18 require utf support
+@rem tests 6 7 10 16 and 19 require ucp support
+@rem 11 requires ucp and link size 2
+@rem 12 requires presence of jit support
+@rem 13 requires absence of jit support
+@rem Sheri P also added override tests for study and jit testing
+@rem Zoltan Herczeg added libpcre16 support
+@rem Zoltan Herczeg added libpcre32 support
+
+setlocal enabledelayedexpansion
+if [%srcdir%]==[] (
+if exist testdata\ set srcdir=.)
+if [%srcdir%]==[] (
+if exist ..\testdata\ set srcdir=..)
+if [%srcdir%]==[] (
+if exist ..\..\testdata\ set srcdir=..\..)
+if NOT exist %srcdir%\testdata\ (
+Error: echo distribution testdata folder not found!
+call :conferror
+exit /b 1
+goto :eof
+)
+
+if [%pcretest%]==[] set pcretest=.\pcretest.exe
+
+echo source dir is %srcdir%
+echo pcretest=%pcretest%
+
+if NOT exist %pcretest% (
+echo Error: %pcretest% not found!
+echo.
+call :conferror
+exit /b 1
+)
+
+%pcretest% -C linksize >NUL
+set link_size=%ERRORLEVEL%
+%pcretest% -C pcre8 >NUL
+set support8=%ERRORLEVEL%
+%pcretest% -C pcre16 >NUL
+set support16=%ERRORLEVEL%
+%pcretest% -C pcre32 >NUL
+set support32=%ERRORLEVEL%
+%pcretest% -C utf >NUL
+set utf=%ERRORLEVEL%
+%pcretest% -C ucp >NUL
+set ucp=%ERRORLEVEL%
+%pcretest% -C jit >NUL
+set jit=%ERRORLEVEL%
+
+if %support8% EQU 1 (
+if not exist testout8 md testout8
+if not exist testoutstudy8 md testoutstudy8
+if not exist testoutjit8 md testoutjit8
+)
+
+if %support16% EQU 1 (
+if not exist testout16 md testout16
+if not exist testoutstudy16 md testoutstudy16
+if not exist testoutjit16 md testoutjit16
+)
+
+if %support16% EQU 1 (
+if not exist testout32 md testout32
+if not exist testoutstudy32 md testoutstudy32
+if not exist testoutjit32 md testoutjit32
+)
+
+set do1=no
+set do2=no
+set do3=no
+set do4=no
+set do5=no
+set do6=no
+set do7=no
+set do8=no
+set do9=no
+set do10=no
+set do11=no
+set do12=no
+set do13=no
+set do14=no
+set do15=no
+set do16=no
+set do17=no
+set do18=no
+set do19=no
+set do20=no
+set do21=no
+set do22=no
+set do23=no
+set do24=no
+set do25=no
+set do26=no
+set all=yes
+
+for %%a in (%*) do (
+ set valid=no
+ for %%v in (1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26) do if %%v == %%a set valid=yes
+ if "!valid!" == "yes" (
+ set do%%a=yes
+ set all=no
+) else (
+ echo Invalid test number - %%a!
+ echo Usage %0 [ test_number ] ...
+ echo Where test_number is one or more optional test numbers 1 through 26, default is all tests.
+ exit /b 1
+)
+)
+set failed="no"
+
+if "%all%" == "yes" (
+ set do1=yes
+ set do2=yes
+ set do3=yes
+ set do4=yes
+ set do5=yes
+ set do6=yes
+ set do7=yes
+ set do8=yes
+ set do9=yes
+ set do10=yes
+ set do11=yes
+ set do12=yes
+ set do13=yes
+ set do14=yes
+ set do15=yes
+ set do16=yes
+ set do17=yes
+ set do18=yes
+ set do19=yes
+ set do20=yes
+ set do21=yes
+ set do22=yes
+ set do23=yes
+ set do24=yes
+ set do25=yes
+ set do26=yes
+)
+
+@echo RunTest.bat's pcretest output is written to newly created subfolders named
+@echo testout, testoutstudy and testoutjit.
+@echo.
+
+set mode=
+set bits=8
+
+:nextMode
+if "%mode%" == "" (
+ if %support8% EQU 0 goto modeSkip
+ echo.
+ echo ---- Testing 8-bit library ----
+ echo.
+)
+if "%mode%" == "-16" (
+ if %support16% EQU 0 goto modeSkip
+ echo.
+ echo ---- Testing 16-bit library ----
+ echo.
+)
+if "%mode%" == "-32" (
+ if %support32% EQU 0 goto modeSkip
+ echo.
+ echo ---- Testing 32-bit library ----
+ echo.
+)
+if "%do1%" == "yes" call :do1
+if "%do2%" == "yes" call :do2
+if "%do3%" == "yes" call :do3
+if "%do4%" == "yes" call :do4
+if "%do5%" == "yes" call :do5
+if "%do6%" == "yes" call :do6
+if "%do7%" == "yes" call :do7
+if "%do8%" == "yes" call :do8
+if "%do9%" == "yes" call :do9
+if "%do10%" == "yes" call :do10
+if "%do11%" == "yes" call :do11
+if "%do12%" == "yes" call :do12
+if "%do13%" == "yes" call :do13
+if "%do14%" == "yes" call :do14
+if "%do15%" == "yes" call :do15
+if "%do16%" == "yes" call :do16
+if "%do17%" == "yes" call :do17
+if "%do18%" == "yes" call :do18
+if "%do19%" == "yes" call :do19
+if "%do20%" == "yes" call :do20
+if "%do21%" == "yes" call :do21
+if "%do22%" == "yes" call :do22
+if "%do23%" == "yes" call :do23
+if "%do24%" == "yes" call :do24
+if "%do25%" == "yes" call :do25
+if "%do26%" == "yes" call :do26
+:modeSkip
+if "%mode%" == "" (
+ set mode=-16
+ set bits=16
+ goto nextMode
+)
+if "%mode%" == "-16" (
+ set mode=-32
+ set bits=32
+ goto nextMode
+)
+
+@rem If mode is -32, testing is finished
+if %failed% == "yes" (
+echo In above output, one or more of the various tests failed!
+exit /b 1
+)
+echo All OK
+goto :eof
+
+:runsub
+@rem Function to execute pcretest and compare the output
+@rem Arguments are as follows:
+@rem
+@rem 1 = test number
+@rem 2 = outputdir
+@rem 3 = test name use double quotes
+@rem 4 - 9 = pcretest options
+
+if [%1] == [] (
+ echo Missing test number argument!
+ exit /b 1
+)
+
+if [%2] == [] (
+ echo Missing outputdir!
+ exit /b 1
+)
+
+if [%3] == [] (
+ echo Missing test name argument!
+ exit /b 1
+)
+
+set testinput=testinput%1
+set testoutput=testoutput%1
+if exist %srcdir%\testdata\win%testinput% (
+ set testinput=wintestinput%1
+ set testoutput=wintestoutput%1
+)
+
+echo Test %1: %3
+%pcretest% %mode% %4 %5 %6 %7 %8 %9 %srcdir%\testdata\%testinput% >%2%bits%\%testoutput%
+if errorlevel 1 (
+ echo. failed executing command-line:
+ echo. %pcretest% %mode% %4 %5 %6 %7 %8 %9 %srcdir%\testdata\%testinput% ^>%2%bits%\%testoutput%
+ set failed="yes"
+ goto :eof
+)
+
+set type=
+if [%1]==[11] (
+ set type=-%bits%
+)
+if [%1]==[18] (
+ set type=-%bits%
+)
+if [%1]==[21] (
+ set type=-%bits%
+)
+if [%1]==[22] (
+ set type=-%bits%
+)
+
+fc /n %srcdir%\testdata\%testoutput%%type% %2%bits%\%testoutput% >NUL
+
+if errorlevel 1 (
+ echo. failed comparison: fc /n %srcdir%\testdata\%testoutput% %2%bits%\%testoutput%
+ if [%1]==[2] (
+ echo.
+ echo ** Test 2 requires a lot of stack. PCRE can be configured to
+ echo ** use heap for recursion. Otherwise, to pass Test 2
+ echo ** you generally need to allocate 8 mb stack to PCRE.
+ echo ** See the 'pcrestack' page for a discussion of PCRE's
+ echo ** stack usage.
+ echo.
+)
+ if [%1]==[3] (
+ echo.
+ echo ** Test 3 failure usually means french locale is not
+ echo ** available on the system, rather than a bug or problem with PCRE.
+ echo.
+ goto :eof
+)
+
+ set failed="yes"
+ goto :eof
+)
+
+echo. Passed.
+goto :eof
+
+:do1
+call :runsub 1 testout "Main functionality (Compatible with Perl >= 5.10)" -q
+call :runsub 1 testoutstudy "Test with Study Override" -q -s
+if %jit% EQU 1 call :runsub 1 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do2
+ call :runsub 2 testout "API, errors, internals, and non-Perl stuff" -q
+ call :runsub 2 testoutstudy "Test with Study Override" -q -s
+ if %jit% EQU 1 call :runsub 2 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do3
+ call :runsub 3 testout "Locale-specific features" -q
+ call :runsub 3 testoutstudy "Test with Study Override" -q -s
+ if %jit% EQU 1 call :runsub 3 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do4
+if %utf% EQU 0 (
+ echo Test 4 Skipped due to absence of UTF-%bits% support.
+ goto :eof
+)
+ call :runsub 4 testout "UTF-%bits% support - (Compatible with Perl >= 5.10)" -q
+ call :runsub 4 testoutstudy "Test with Study Override" -q -s
+ if %jit% EQU 1 call :runsub 4 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do5
+if %utf% EQU 0 (
+ echo Test 5 Skipped due to absence of UTF-%bits% support.
+ goto :eof
+)
+ call :runsub 5 testout "API, internals, and non-Perl stuff for UTF-%bits%" -q
+ call :runsub 5 testoutstudy "Test with Study Override" -q -s
+ if %jit% EQU 1 call :runsub 5 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do6
+if %ucp% EQU 0 (
+ echo Test 6 Skipped due to absence of Unicode property support.
+ goto :eof
+)
+ call :runsub 6 testout "Unicode property support (Compatible with Perl >= 5.10)" -q
+ call :runsub 6 testoutstudy "Test with Study Override" -q -s
+ if %jit% EQU 1 call :runsub 6 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do7
+if %ucp% EQU 0 (
+ echo Test 7 Skipped due to absence of Unicode property support.
+ goto :eof
+)
+ call :runsub 7 testout "API, internals, and non-Perl stuff for Unicode property support" -q
+ call :runsub 7 testoutstudy "Test with Study Override" -q -s
+ if %jit% EQU 1 call :runsub 7 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do8
+ call :runsub 8 testout "DFA matching main functionality" -q -dfa
+ call :runsub 8 testoutstudy "Test with Study Override" -q -dfa -s
+goto :eof
+
+:do9
+if %utf% EQU 0 (
+ echo Test 9 Skipped due to absence of UTF-%bits% support.
+ goto :eof
+)
+ call :runsub 9 testout "DFA matching with UTF-%bits%" -q -dfa
+ call :runsub 9 testoutstudy "Test with Study Override" -q -dfa -s
+ goto :eof
+
+:do10
+if %ucp% EQU 0 (
+ echo Test 10 Skipped due to absence of Unicode property support.
+ goto :eof
+)
+ call :runsub 10 testout "DFA matching with Unicode properties" -q -dfa
+ call :runsub 10 testoutstudy "Test with Study Override" -q -dfa -s
+goto :eof
+
+:do11
+if NOT %link_size% EQU 2 (
+ echo Test 11 Skipped because link size is not 2.
+ goto :eof
+)
+if %ucp% EQU 0 (
+ echo Test 11 Skipped due to absence of Unicode property support.
+ goto :eof
+)
+ call :runsub 11 testout "Internal offsets and code size tests" -q
+ call :runsub 11 testoutstudy "Test with Study Override" -q -s
+goto :eof
+
+:do12
+if %jit% EQU 0 (
+ echo Test 12 Skipped due to absence of JIT support.
+ goto :eof
+)
+ call :runsub 12 testout "JIT-specific features (JIT available)" -q
+goto :eof
+
+:do13
+if %jit% EQU 1 (
+ echo Test 13 Skipped due to presence of JIT support.
+ goto :eof
+)
+ call :runsub 13 testout "JIT-specific features (JIT not available)" -q
+goto :eof
+
+:do14
+if NOT %bits% EQU 8 (
+ echo Test 14 Skipped when running 16/32-bit tests.
+ goto :eof
+)
+ copy /Y %srcdir%\testdata\saved16 testsaved16
+ copy /Y %srcdir%\testdata\saved32 testsaved32
+ call :runsub 14 testout "Specials for the basic 8-bit library" -q
+ call :runsub 14 testoutstudy "Test with Study Override" -q -s
+ if %jit% EQU 1 call :runsub 14 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do15
+if NOT %bits% EQU 8 (
+ echo Test 15 Skipped when running 16/32-bit tests.
+ goto :eof
+)
+if %utf% EQU 0 (
+ echo Test 15 Skipped due to absence of UTF-%bits% support.
+ goto :eof
+)
+ call :runsub 15 testout "Specials for the 8-bit library with UTF-%bits% support" -q
+ call :runsub 15 testoutstudy "Test with Study Override" -q -s
+ if %jit% EQU 1 call :runsub 15 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do16
+if NOT %bits% EQU 8 (
+ echo Test 16 Skipped when running 16/32-bit tests.
+ goto :eof
+)
+if %ucp% EQU 0 (
+ echo Test 16 Skipped due to absence of Unicode property support.
+ goto :eof
+)
+ call :runsub 16 testout "Specials for the 8-bit library with Unicode propery support" -q
+ call :runsub 16 testoutstudy "Test with Study Override" -q -s
+ if %jit% EQU 1 call :runsub 16 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do17
+if %bits% EQU 8 (
+ echo Test 17 Skipped when running 8-bit tests.
+ goto :eof
+)
+ call :runsub 17 testout "Specials for the basic 16/32-bit library" -q
+ call :runsub 17 testoutstudy "Test with Study Override" -q -s
+ if %jit% EQU 1 call :runsub 17 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do18
+if %bits% EQU 8 (
+ echo Test 18 Skipped when running 8-bit tests.
+ goto :eof
+)
+if %utf% EQU 0 (
+ echo Test 18 Skipped due to absence of UTF-%bits% support.
+ goto :eof
+)
+ call :runsub 18 testout "Specials for the 16/32-bit library with UTF-%bits% support" -q
+ call :runsub 18 testoutstudy "Test with Study Override" -q -s
+ if %jit% EQU 1 call :runsub 18 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do19
+if %bits% EQU 8 (
+ echo Test 19 Skipped when running 8-bit tests.
+ goto :eof
+)
+if %ucp% EQU 0 (
+ echo Test 19 Skipped due to absence of Unicode property support.
+ goto :eof
+)
+ call :runsub 19 testout "Specials for the 16/32-bit library with Unicode property support" -q
+ call :runsub 19 testoutstudy "Test with Study Override" -q -s
+ if %jit% EQU 1 call :runsub 19 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do20
+if %bits% EQU 8 (
+ echo Test 20 Skipped when running 8-bit tests.
+ goto :eof
+)
+ call :runsub 20 testout "DFA specials for the basic 16/32-bit library" -q -dfa
+ call :runsub 20 testoutstudy "Test with Study Override" -q -dfa -s
+goto :eof
+
+:do21
+if %bits% EQU 8 (
+ echo Test 21 Skipped when running 8-bit tests.
+ goto :eof
+)
+if NOT %link_size% EQU 2 (
+ echo Test 21 Skipped because link size is not 2.
+ goto :eof
+)
+copy /Y %srcdir%\testdata\saved8 testsaved8
+copy /Y %srcdir%\testdata\saved16LE-1 testsaved16LE-1
+copy /Y %srcdir%\testdata\saved16BE-1 testsaved16BE-1
+copy /Y %srcdir%\testdata\saved32LE-1 testsaved32LE-1
+copy /Y %srcdir%\testdata\saved32BE-1 testsaved32BE-1
+call :runsub 21 testout "Reloads for the basic 16/32-bit library" -q
+call :runsub 21 testoutstudy "Test with Study Override" -q -s
+if %jit% EQU 1 call :runsub 21 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do22
+if %bits% EQU 8 (
+ echo Test 22 Skipped when running 8-bit tests.
+ goto :eof
+)
+if %utf% EQU 0 (
+ echo Test 22 Skipped due to absence of UTF-%bits% support.
+ goto :eof
+)
+if NOT %link_size% EQU 2 (
+ echo Test 22 Skipped because link size is not 2.
+ goto :eof
+)
+copy /Y %srcdir%\testdata\saved16LE-2 testsaved16LE-2
+copy /Y %srcdir%\testdata\saved16BE-2 testsaved16BE-2
+copy /Y %srcdir%\testdata\saved32LE-2 testsaved32LE-2
+copy /Y %srcdir%\testdata\saved32BE-2 testsaved32BE-2
+call :runsub 22 testout "Reloads for the 16/32-bit library with UTF-16/32 support" -q
+call :runsub 22 testoutstudy "Test with Study Override" -q -s
+if %jit% EQU 1 call :runsub 22 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do23
+if NOT %bits% EQU 16 (
+ echo Test 23 Skipped when running 8/32-bit tests.
+ goto :eof
+)
+call :runsub 23 testout "Specials for the 16-bit library" -q
+call :runsub 23 testoutstudy "Test with Study Override" -q -s
+if %jit% EQU 1 call :runsub 23 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do24
+if NOT %bits% EQU 16 (
+ echo Test 24 Skipped when running 8/32-bit tests.
+ goto :eof
+)
+if %utf% EQU 0 (
+ echo Test 24 Skipped due to absence of UTF-%bits% support.
+ goto :eof
+)
+call :runsub 24 testout "Specials for the 16-bit library with UTF-16 support" -q
+call :runsub 24 testoutstudy "Test with Study Override" -q -s
+if %jit% EQU 1 call :runsub 24 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do25
+if NOT %bits% EQU 32 (
+ echo Test 25 Skipped when running 8/16-bit tests.
+ goto :eof
+)
+call :runsub 25 testout "Specials for the 32-bit library" -q
+call :runsub 25 testoutstudy "Test with Study Override" -q -s
+if %jit% EQU 1 call :runsub 25 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do26
+if NOT %bits% EQU 32 (
+ echo Test 26 Skipped when running 8/16-bit tests.
+ goto :eof
+)
+if %utf% EQU 0 (
+ echo Test 26 Skipped due to absence of UTF-%bits% support.
+ goto :eof
+)
+call :runsub 26 testout "Specials for the 32-bit library with UTF-32 support" -q
+call :runsub 26 testoutstudy "Test with Study Override" -q -s
+if %jit% EQU 1 call :runsub 26 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:conferror
+@echo.
+@echo Either your build is incomplete or you have a configuration error.
+@echo.
+@echo If configured with cmake and executed via "make test" or the MSVC "RUN_TESTS"
+@echo project, pcre_test.bat defines variables and automatically calls RunTest.bat.
+@echo For manual testing of all available features, after configuring with cmake
+@echo and building, you can run the built pcre_test.bat. For best results with
+@echo cmake builds and tests avoid directories with full path names that include
+@echo spaces for source or build.
+@echo.
+@echo Otherwise, if the build dir is in a subdir of the source dir, testdata needed
+@echo for input and verification should be found automatically when (from the
+@echo location of the the built exes) you call RunTest.bat. By default RunTest.bat
+@echo runs all tests compatible with the linked pcre library but it can be given
+@echo a test number as an argument.
+@echo.
+@echo If the build dir is not under the source dir you can either copy your exes
+@echo to the source folder or copy RunTest.bat and the testdata folder to the
+@echo location of your built exes and then run RunTest.bat.
+@echo.
+goto :eof
diff --git a/dist/aclocal.m4 b/dist/aclocal.m4
index 693248e..be3d337 100644
--- a/dist/aclocal.m4
+++ b/dist/aclocal.m4
@@ -1,6 +1,6 @@
-# generated automatically by aclocal 1.14.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.15 -*- Autoconf -*-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -235,7 +235,7 @@
AS_VAR_IF([$1], [""], [$5], [$4])dnl
])# PKG_CHECK_VAR
-# Copyright (C) 2002-2013 Free Software Foundation, Inc.
+# Copyright (C) 2002-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -247,10 +247,10 @@
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.14'
+[am__api_version='1.15'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.14.1], [],
+m4_if([$1], [1.15], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -266,12 +266,12 @@
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.14.1])dnl
+[AM_AUTOMAKE_VERSION([1.15])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-# Copyright (C) 2011-2013 Free Software Foundation, Inc.
+# Copyright (C) 2011-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -333,7 +333,7 @@
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -378,15 +378,14 @@
# configured tree to be moved without reconfiguration.
AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
])
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -417,7 +416,7 @@
Usually this means the macro was only invoked conditionally.]])
fi])])
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -608,7 +607,7 @@
# Generate code to set up dependency tracking. -*- Autoconf -*-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -684,7 +683,7 @@
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -774,8 +773,8 @@
# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
@@ -848,7 +847,11 @@
END
AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
fi
-fi])
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
@@ -877,7 +880,7 @@
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -888,7 +891,7 @@
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -898,7 +901,7 @@
fi
AC_SUBST([install_sh])])
-# Copyright (C) 2003-2013 Free Software Foundation, Inc.
+# Copyright (C) 2003-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -919,7 +922,7 @@
# Check to see how 'make' treats includes. -*- Autoconf -*-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -969,7 +972,7 @@
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -1008,7 +1011,7 @@
# Helper functions for option handling. -*- Autoconf -*-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -1037,7 +1040,7 @@
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -1084,7 +1087,7 @@
# For backward compatibility.
AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -1103,7 +1106,7 @@
# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -1184,7 +1187,7 @@
rm -f conftest.file
])
-# Copyright (C) 2009-2013 Free Software Foundation, Inc.
+# Copyright (C) 2009-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -1244,7 +1247,7 @@
_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
])
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -1272,7 +1275,7 @@
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
-# Copyright (C) 2006-2013 Free Software Foundation, Inc.
+# Copyright (C) 2006-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -1291,7 +1294,7 @@
# Check how to create a tarball. -*- Autoconf -*-
-# Copyright (C) 2004-2013 Free Software Foundation, Inc.
+# Copyright (C) 2004-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
diff --git a/dist/ar-lib b/dist/ar-lib
index fe2301e..463b9ec 100755
--- a/dist/ar-lib
+++ b/dist/ar-lib
@@ -4,7 +4,7 @@
me=ar-lib
scriptversion=2012-03-01.08; # UTC
-# Copyright (C) 2010-2013 Free Software Foundation, Inc.
+# Copyright (C) 2010-2014 Free Software Foundation, Inc.
# Written by Peter Rosin <peda@lysator.liu.se>.
#
# This program is free software; you can redistribute it and/or modify
diff --git a/dist/compile b/dist/compile
index 531136b..a85b723 100755
--- a/dist/compile
+++ b/dist/compile
@@ -3,7 +3,7 @@
scriptversion=2012-10-14.11; # UTC
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
diff --git a/dist/config.guess b/dist/config.guess
index 9afd676..6c32c86 100755
--- a/dist/config.guess
+++ b/dist/config.guess
@@ -1,8 +1,8 @@
#! /bin/sh
# Attempt to guess a canonical system name.
-# Copyright 1992-2013 Free Software Foundation, Inc.
+# Copyright 1992-2014 Free Software Foundation, Inc.
-timestamp='2013-11-29'
+timestamp='2014-11-04'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -24,12 +24,12 @@
# program. This Exception is an additional permission under section 7
# of the GNU General Public License, version 3 ("GPLv3").
#
-# Originally written by Per Bothner.
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
#
# You can get the latest version of this script from:
# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
#
-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+# Please send patches to <config-patches@gnu.org>.
me=`echo "$0" | sed -e 's,.*/,,'`
@@ -50,7 +50,7 @@
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright 1992-2013 Free Software Foundation, Inc.
+Copyright 1992-2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -149,7 +149,7 @@
LIBC=gnu
#endif
EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
;;
esac
@@ -579,8 +579,9 @@
else
IBM_ARCH=powerpc
fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
+ if [ -x /usr/bin/lslpp ] ; then
+ IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+ awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
else
IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
@@ -826,7 +827,7 @@
*:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
exit ;;
- i*:MSYS*:*)
+ *:MSYS*:*)
echo ${UNAME_MACHINE}-pc-msys
exit ;;
i*:windows32*:*)
@@ -969,10 +970,10 @@
eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
;;
- or1k:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ openrisc*:Linux:*:*)
+ echo or1k-unknown-linux-${LIBC}
exit ;;
- or32:Linux:*:*)
+ or32:Linux:*:* | or1k*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
padre:Linux:*:*)
@@ -1371,154 +1372,6 @@
exit ;;
esac
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- c34*)
- echo c34-convex-bsd
- exit ;;
- c38*)
- echo c38-convex-bsd
- exit ;;
- c4*)
- echo c4-convex-bsd
- exit ;;
- esac
-fi
-
cat >&2 <<EOF
$0: unable to guess system type
diff --git a/dist/config.h.generic b/dist/config.h.generic
index 6492116..00a808a 100644
--- a/dist/config.h.generic
+++ b/dist/config.h.generic
@@ -162,8 +162,7 @@
#define LINK_SIZE 2
#endif
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
- */
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
/* This is ignored unless you are using libtool. */
#ifndef LT_OBJDIR
#define LT_OBJDIR ".libs/"
@@ -236,7 +235,7 @@
#define PACKAGE_NAME "PCRE"
/* Define to the full name and version of this package. */
-#define PACKAGE_STRING "PCRE 8.36"
+#define PACKAGE_STRING "PCRE 8.37"
/* Define to the one symbol short name of this package. */
#define PACKAGE_TARNAME "pcre"
@@ -245,7 +244,7 @@
#define PACKAGE_URL ""
/* Define to the version of this package. */
-#define PACKAGE_VERSION "8.36"
+#define PACKAGE_VERSION "8.37"
/* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested
parentheses (of any kind) in a pattern. This limits the amount of system
@@ -337,7 +336,7 @@
/* #undef SUPPORT_VALGRIND */
/* Version number of package */
-#define VERSION "8.36"
+#define VERSION "8.37"
/* Define to empty if `const' does not conform to ANSI C. */
/* #undef const */
diff --git a/dist/config.h.in b/dist/config.h.in
index 46f56c2..0b2f45d 100644
--- a/dist/config.h.in
+++ b/dist/config.h.in
@@ -160,8 +160,7 @@
for longer patterns in extreme cases. */
#undef LINK_SIZE
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
- */
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
#undef LT_OBJDIR
/* The value of MATCH_LIMIT determines the default number of times the
diff --git a/dist/config.sub b/dist/config.sub
index 61cb4bc..7ffe373 100755
--- a/dist/config.sub
+++ b/dist/config.sub
@@ -1,8 +1,8 @@
#! /bin/sh
# Configuration validation subroutine script.
-# Copyright 1992-2013 Free Software Foundation, Inc.
+# Copyright 1992-2014 Free Software Foundation, Inc.
-timestamp='2013-10-01'
+timestamp='2014-12-03'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -25,7 +25,7 @@
# of the GNU General Public License, version 3 ("GPLv3").
-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+# Please send patches to <config-patches@gnu.org>.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
@@ -68,7 +68,7 @@
version="\
GNU config.sub ($timestamp)
-Copyright 1992-2013 Free Software Foundation, Inc.
+Copyright 1992-2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -283,8 +283,10 @@
| mips64vr5900 | mips64vr5900el \
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
+ | mipsisa32r6 | mipsisa32r6el \
| mipsisa64 | mipsisa64el \
| mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64r6 | mipsisa64r6el \
| mipsisa64sb1 | mipsisa64sb1el \
| mipsisa64sr71k | mipsisa64sr71kel \
| mipsr5900 | mipsr5900el \
@@ -296,11 +298,11 @@
| nds32 | nds32le | nds32be \
| nios | nios2 | nios2eb | nios2el \
| ns16k | ns32k \
- | open8 \
- | or1k | or32 \
+ | open8 | or1k | or1knd | or32 \
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle \
| pyramid \
+ | riscv32 | riscv64 \
| rl78 | rx \
| score \
| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
@@ -311,6 +313,7 @@
| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
| ubicom32 \
| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+ | visium \
| we32k \
| x86 | xc16x | xstormy16 | xtensa \
| z8k | z80)
@@ -325,6 +328,9 @@
c6x)
basic_machine=tic6x-unknown
;;
+ leon|leon[3-9])
+ basic_machine=sparc-$basic_machine
+ ;;
m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
basic_machine=$basic_machine-unknown
os=-none
@@ -402,8 +408,10 @@
| mips64vr5900-* | mips64vr5900el-* \
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa32r6-* | mipsisa32r6el-* \
| mipsisa64-* | mipsisa64el-* \
| mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64r6-* | mipsisa64r6el-* \
| mipsisa64sb1-* | mipsisa64sb1el-* \
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
| mipsr5900-* | mipsr5900el-* \
@@ -415,6 +423,7 @@
| nios-* | nios2-* | nios2eb-* | nios2el-* \
| none-* | np1-* | ns16k-* | ns32k-* \
| open8-* \
+ | or1k*-* \
| orion-* \
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
@@ -432,6 +441,7 @@
| ubicom32-* \
| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
| vax-* \
+ | visium-* \
| we32k-* \
| x86-* | x86_64-* | xc16x-* | xps100-* \
| xstormy16-* | xtensa*-* \
@@ -769,6 +779,9 @@
basic_machine=m68k-isi
os=-sysv
;;
+ leon-*|leon[3-9]-*)
+ basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
+ ;;
m68knommu)
basic_machine=m68k-unknown
os=-linux
@@ -824,6 +837,10 @@
basic_machine=powerpc-unknown
os=-morphos
;;
+ moxiebox)
+ basic_machine=moxie-unknown
+ os=-moxiebox
+ ;;
msdos)
basic_machine=i386-pc
os=-msdos
@@ -1369,14 +1386,14 @@
| -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
| -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
| -linux-newlib* | -linux-musl* | -linux-uclibc* \
- | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
| -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@@ -1594,9 +1611,6 @@
mips*-*)
os=-elf
;;
- or1k-*)
- os=-elf
- ;;
or32-*)
os=-coff
;;
diff --git a/dist/configure b/dist/configure
index 696c02e..6f0edd2 100755
--- a/dist/configure
+++ b/dist/configure
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for PCRE 8.36.
+# Generated by GNU Autoconf 2.69 for PCRE 8.37.
#
#
# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -587,8 +587,8 @@
# Identity of this package.
PACKAGE_NAME='PCRE'
PACKAGE_TARNAME='pcre'
-PACKAGE_VERSION='8.36'
-PACKAGE_STRING='PCRE 8.36'
+PACKAGE_VERSION='8.37'
+PACKAGE_STRING='PCRE 8.37'
PACKAGE_BUGREPORT=''
PACKAGE_URL=''
@@ -692,6 +692,7 @@
VISIBILITY_CXXFLAGS
VISIBILITY_CFLAGS
CXXCPP
+LT_SYS_LIBRARY_PATH
OTOOL64
OTOOL
LIPO
@@ -820,6 +821,7 @@
enable_static
with_pic
enable_fast_install
+with_aix_soname
with_gnu_ld
with_sysroot
enable_libtool_lock
@@ -867,6 +869,7 @@
CXXFLAGS
CCC
CPP
+LT_SYS_LIBRARY_PATH
CXXCPP
PKG_CONFIG
PKG_CONFIG_PATH
@@ -1415,7 +1418,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures PCRE 8.36 to adapt to many kinds of systems.
+\`configure' configures PCRE 8.37 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1485,7 +1488,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of PCRE 8.36:";;
+ short | recursive ) echo "Configuration of PCRE 8.37:";;
esac
cat <<\_ACEOF
@@ -1549,9 +1552,12 @@
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
both]
+ --with-aix-soname=aix|svr4|both
+ shared library versioning (aka "SONAME") variant to
+ provide on AIX, [default=aix].
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
- --with-sysroot=DIR Search for dependent libraries within DIR
- (or the compiler's sysroot if not specified).
+ --with-sysroot[=DIR] Search for dependent libraries within DIR (or the
+ compiler's sysroot if not specified).
--with-pcregrep-bufsize=N
pcregrep buffer size (default=20480, minimum=8192)
--with-posix-malloc-threshold=NBYTES
@@ -1575,6 +1581,8 @@
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CPP C preprocessor
+ LT_SYS_LIBRARY_PATH
+ User-defined run-time library search path.
CXXCPP C++ preprocessor
PKG_CONFIG path to pkg-config utility
PKG_CONFIG_PATH
@@ -1654,7 +1662,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-PCRE configure 8.36
+PCRE configure 8.37
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2411,7 +2419,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by PCRE $as_me 8.36, which was
+It was created by PCRE $as_me 8.37, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@@ -2760,7 +2768,7 @@
-am__api_version='1.14'
+am__api_version='1.15'
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
@@ -2961,8 +2969,8 @@
ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
if test x"${MISSING+set}" != xset; then
case $am_aux_dir in
@@ -2981,7 +2989,7 @@
$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
fi
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -3275,7 +3283,7 @@
# Define the identity of the package.
PACKAGE='pcre'
- VERSION='8.36'
+ VERSION='8.37'
cat >>confdefs.h <<_ACEOF
@@ -3309,8 +3317,8 @@
# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
mkdir_p='$(MKDIR_P)'
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
@@ -3367,6 +3375,7 @@
as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
fi
fi
+
# Check whether --enable-silent-rules was given.
if test "${enable_silent_rules+set}" = set; then :
enableval=$enable_silent_rules;
@@ -6599,8 +6608,8 @@
-macro_version='2.4.2'
-macro_revision='1.3337'
+macro_version='2.4.6'
+macro_revision='2.4.6'
@@ -6614,7 +6623,7 @@
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
# Backslashify metacharacters that are still active within
# double-quoted strings.
@@ -6663,7 +6672,7 @@
$ECHO ""
}
-case "$ECHO" in
+case $ECHO in
printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
$as_echo "printf" >&6; } ;;
print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
@@ -6856,19 +6865,19 @@
# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+ withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
else
with_gnu_ld=no
fi
ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
$as_echo_n "checking for ld used by $CC... " >&6; }
case $host in
*-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
+ # gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -6882,7 +6891,7 @@
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
- test -z "$LD" && LD="$ac_prog"
+ test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
@@ -6893,7 +6902,7 @@
with_gnu_ld=unknown
;;
esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
$as_echo_n "checking for GNU ld... " >&6; }
else
@@ -6904,32 +6913,32 @@
$as_echo_n "(cached) " >&6
else
if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
+ test no != "$with_gnu_ld" && break
;;
*)
- test "$with_gnu_ld" != yes && break
+ test yes != "$with_gnu_ld" && break
;;
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
fi
fi
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
if test -n "$LD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
$as_echo "$LD" >&6; }
@@ -6972,33 +6981,38 @@
else
if test -n "$NM"; then
# Let the user override the test.
- lt_cv_path_NM="$NM"
+ lt_cv_path_NM=$NM
else
- lt_nm_to_check="${ac_tool_prefix}nm"
+ lt_nm_to_check=${ac_tool_prefix}nm
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
# Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
- break
+ break 2
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
- break
+ break 2
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
@@ -7009,15 +7023,15 @@
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
done
: ${lt_cv_path_NM=no}
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
$as_echo "$lt_cv_path_NM" >&6; }
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
else
# Didn't find any BSD compatible name lister, look for dumpbin.
if test -n "$DUMPBIN"; then :
@@ -7123,9 +7137,9 @@
fi
fi
- case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
*COFF*)
- DUMPBIN="$DUMPBIN -symbols"
+ DUMPBIN="$DUMPBIN -symbols -headers"
;;
*)
DUMPBIN=:
@@ -7133,8 +7147,8 @@
esac
fi
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
fi
fi
test -z "$NM" && NM=nm
@@ -7185,7 +7199,7 @@
$as_echo_n "(cached) " >&6
else
i=0
- teststring="ABCD"
+ teststring=ABCD
case $build_os in
msdosdjgpp*)
@@ -7225,7 +7239,7 @@
lt_cv_sys_max_cmd_len=8192;
;;
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -7275,22 +7289,23 @@
;;
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
+ if test -n "$lt_cv_sys_max_cmd_len" && \
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
+ for i in 1 2 3 4 5 6 7 8; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
= "X$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
+ test 17 != "$i" # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
@@ -7308,7 +7323,7 @@
fi
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
else
@@ -7326,30 +7341,6 @@
: ${MV="mv -f"}
: ${RM="rm -f"}
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
-$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
-$as_echo "$xsi_shell" >&6; }
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
-$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
-$as_echo "$lt_shell_append" >&6; }
-
-
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
@@ -7472,13 +7463,13 @@
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
reload_cmds=false
fi
;;
darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ if test yes = "$GCC"; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
@@ -7603,13 +7594,13 @@
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
case $host_os in
aix[4-9]*)
@@ -7636,8 +7627,7 @@
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
- if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ if ( file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
@@ -7673,10 +7663,6 @@
fi
;;
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
haiku*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -7715,7 +7701,7 @@
;;
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -7737,8 +7723,8 @@
lt_cv_deplibs_check_method=pass_all
;;
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
@@ -7791,6 +7777,9 @@
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
fi
@@ -7945,8 +7934,8 @@
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- # two different shell functions defined in ltmain.sh
- # decide which to use based on capabilities of $DLLTOOL
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
case `$DLLTOOL --help 2>&1` in
*--identify-strict*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
@@ -7958,7 +7947,7 @@
;;
*)
# fallback: assume linklib IS sharedlib
- lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
;;
esac
@@ -8112,7 +8101,7 @@
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
- if test "$ac_status" -eq 0; then
+ if test 0 -eq "$ac_status"; then
# Ensure the archiver fails upon bogus file names.
rm -f conftest.$ac_objext libconftest.a
{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
@@ -8120,7 +8109,7 @@
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
- if test "$ac_status" -ne 0; then
+ if test 0 -ne "$ac_status"; then
lt_cv_ar_at_file=@
fi
fi
@@ -8133,7 +8122,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
$as_echo "$lt_cv_ar_at_file" >&6; }
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
archiver_list_spec=
else
archiver_list_spec=$lt_cv_ar_at_file
@@ -8350,7 +8339,7 @@
if test -n "$RANLIB"; then
case $host_os in
- openbsd*)
+ bitrig* | openbsd*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
@@ -8440,7 +8429,7 @@
symcode='[ABCDGISTW]'
;;
hpux*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
symcode='[ABCDEGRST]'
fi
;;
@@ -8473,14 +8462,44 @@
symcode='[ABCDGIRSTW]' ;;
esac
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
@@ -8498,21 +8517,24 @@
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
# Also find C++ and __fastcall symbols from MSVC++,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK '"\
" {last_section=section; section=\$ 3};"\
" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx"
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
@@ -8560,11 +8582,11 @@
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT_DLSYM_CONST
#else
@@ -8590,7 +8612,7 @@
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
@@ -8610,13 +8632,13 @@
mv conftest.$ac_objext conftstm.$ac_objext
lt_globsym_save_LIBS=$LIBS
lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
+ LIBS=conftstm.$ac_objext
CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ test $ac_status = 0; } && test -s conftest$ac_exeext; then
pipe_works=yes
fi
LIBS=$lt_globsym_save_LIBS
@@ -8637,7 +8659,7 @@
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
+ if test yes = "$pipe_works"; then
break
else
lt_cv_sys_global_symbol_pipe=
@@ -8690,6 +8712,16 @@
+
+
+
+
+
+
+
+
+
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
$as_echo_n "checking for sysroot... " >&6; }
@@ -8702,9 +8734,9 @@
lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
yes)
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_sysroot=`$CC --print-sysroot 2>/dev/null`
fi
;; #(
@@ -8714,8 +8746,8 @@
no|'')
;; #(
*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
-$as_echo "${with_sysroot}" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5
+$as_echo "$with_sysroot" >&6; }
as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
;;
esac
@@ -8727,18 +8759,99 @@
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5
+$as_echo_n "checking for a working dd... " >&6; }
+if ${ac_cv_path_lt_DD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+if test -z "$lt_DD"; then
+ ac_path_lt_DD_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in dd; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_lt_DD" || continue
+if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi
+ $ac_path_lt_DD_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_lt_DD"; then
+ :
+ fi
+else
+ ac_cv_path_lt_DD=$lt_DD
+fi
+
+rm -f conftest.i conftest2.i conftest.out
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5
+$as_echo "$ac_cv_path_lt_DD" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5
+$as_echo_n "checking how to truncate binary pipes... " >&6; }
+if ${lt_cv_truncate_bin+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5
+$as_echo "$lt_cv_truncate_bin" >&6; }
+
+
+
+
+
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
# Check whether --enable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then :
enableval=$enable_libtool_lock;
fi
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
@@ -8747,24 +8860,25 @@
test $ac_status = 0; }; then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
- HPUX_IA64_MODE="32"
+ HPUX_IA64_MODE=32
;;
*ELF-64*)
- HPUX_IA64_MODE="64"
+ HPUX_IA64_MODE=64
;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo '#line '$LINENO' "configure"' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
@@ -8793,9 +8907,50 @@
rm -rf conftest*
;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
@@ -8809,9 +8964,19 @@
LD="${LD-ld} -m elf_i386_fbsd"
;;
x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
;;
- ppc64-*linux*|powerpc64-*linux*)
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
@@ -8830,7 +8995,10 @@
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
- ppc*-*linux*|powerpc*-*linux*)
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
@@ -8848,7 +9016,7 @@
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
+ SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -belf"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
@@ -8888,13 +9056,14 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
$as_echo "$lt_cv_cc_needs_belf" >&6; }
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ if test yes != "$lt_cv_cc_needs_belf"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+ CFLAGS=$SAVE_CFLAGS
fi
;;
*-*solaris*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
@@ -8906,7 +9075,7 @@
case $lt_cv_prog_gnu_ld in
yes*)
case $host in
- i?86-*-solaris*)
+ i?86-*-solaris*|x86_64-*-solaris*)
LD="${LD-ld} -m elf_x86_64"
;;
sparc*-*-solaris*)
@@ -8915,7 +9084,7 @@
esac
# GNU ld 2.21 introduced _sol2 emulations. Use them if available.
if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
- LD="${LD-ld}_sol2"
+ LD=${LD-ld}_sol2
fi
;;
*)
@@ -8931,7 +9100,7 @@
;;
esac
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
@@ -9042,7 +9211,7 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
$as_echo "$lt_cv_path_mainfest_tool" >&6; }
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
MANIFEST_TOOL=:
fi
@@ -9545,7 +9714,7 @@
$as_echo_n "(cached) " >&6
else
lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
+ if test -z "$LT_MULTI_MODULE"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
@@ -9563,7 +9732,7 @@
cat conftest.err >&5
# Otherwise, if the output was created with a 0 exit code from
# the compiler, it worked.
- elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&5
@@ -9602,7 +9771,7 @@
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
@@ -9631,7 +9800,7 @@
_lt_result=$?
if test -s conftest.err && $GREP force_load conftest.err; then
cat conftest.err >&5
- elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
lt_cv_ld_force_load=yes
else
cat conftest.err >&5
@@ -9644,32 +9813,32 @@
$as_echo "$lt_cv_ld_force_load" >&6; }
case $host_os in
rhapsody* | darwin1.[012])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[91]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[012]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[012][,.]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
_lt_dar_single_mod='$single_module'
fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
fi
- if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
@@ -9677,6 +9846,41 @@
;;
esac
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
for ac_header in dlfcn.h
do :
ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
@@ -9694,9 +9898,9 @@
func_stripname_cnf ()
{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ case $2 in
+ .*) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%\\\\$2\$%%"`;;
+ *) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%$2\$%%"`;;
esac
} # func_stripname_cnf
@@ -9721,14 +9925,14 @@
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
@@ -9752,14 +9956,14 @@
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
@@ -9783,14 +9987,14 @@
*)
pic_mode=default
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for lt_pkg in $withval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$lt_pkg" = "X$lt_p"; then
pic_mode=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
@@ -9798,8 +10002,6 @@
fi
-test -z "$pic_mode" && pic_mode=default
-
@@ -9815,14 +10017,14 @@
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
@@ -9836,11 +10038,63 @@
+ shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[5-9]*,yes)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5
+$as_echo_n "checking which variant of shared library versioning to provide... " >&6; }
+
+# Check whether --with-aix-soname was given.
+if test "${with_aix_soname+set}" = set; then :
+ withval=$with_aix_soname; case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname
+else
+ if ${lt_cv_with_aix_soname+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_with_aix_soname=aix
+fi
+
+ with_aix_soname=$lt_cv_with_aix_soname
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5
+$as_echo "$with_aix_soname" >&6; }
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+
+
+
+
+
+
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -9889,7 +10143,7 @@
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
@@ -9928,7 +10182,7 @@
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
+ if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -9939,14 +10193,14 @@
ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
# Set sane defaults for various variables
test -z "$CC" && CC=cc
@@ -9955,15 +10209,8 @@
test -z "$LD" && LD=ld
test -z "$ac_objext" && ac_objext=o
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
# Only perform the check for file, if the check method requires it
@@ -9978,22 +10225,22 @@
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/${ac_tool_prefix}file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -f "$ac_dir/${ac_tool_prefix}file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
@@ -10016,13 +10263,13 @@
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac
fi
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
@@ -10044,22 +10291,22 @@
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -f "$ac_dir/file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
@@ -10082,13 +10329,13 @@
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac
fi
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
@@ -10109,7 +10356,7 @@
# Use C for the default configuration in the libtool script
-lt_save_CC="$CC"
+lt_save_CC=$CC
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -10171,7 +10418,7 @@
lt_prog_compiler_no_builtin_flag=
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $cc_basename in
nvcc*)
lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
@@ -10187,7 +10434,7 @@
lt_cv_prog_compiler_rtti_exceptions=no
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-fno-rtti -fno-exceptions"
+ lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
@@ -10217,7 +10464,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then
lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
else
:
@@ -10235,17 +10482,18 @@
lt_prog_compiler_static=
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_static='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
fi
+ lt_prog_compiler_pic='-fPIC'
;;
amigaos*)
@@ -10256,8 +10504,8 @@
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
;;
esac
@@ -10273,6 +10521,11 @@
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
@@ -10343,7 +10596,7 @@
case $host_os in
aix*)
lt_prog_compiler_wl='-Wl,'
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
else
@@ -10351,10 +10604,29 @@
fi
;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ esac
+ ;;
+
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
;;
hpux9* | hpux10* | hpux11*)
@@ -10370,7 +10642,7 @@
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static='${wl}-a ${wl}archive'
+ lt_prog_compiler_static='$wl-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
@@ -10379,9 +10651,9 @@
lt_prog_compiler_static='-non_shared'
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
+ # old Intel for x86_64, which still supported -KPIC.
ecc*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
@@ -10406,6 +10678,12 @@
lt_prog_compiler_pic='-PIC'
lt_prog_compiler_static='-Bstatic'
;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
@@ -10503,7 +10781,7 @@
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
lt_prog_compiler_pic='-Kconform_pic'
lt_prog_compiler_static='-Bstatic'
fi
@@ -10532,7 +10810,7 @@
fi
case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
+ # For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic=
;;
@@ -10564,7 +10842,7 @@
lt_cv_prog_compiler_pic_works=no
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
@@ -10594,7 +10872,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_pic_works"; then
case $lt_prog_compiler_pic in
"" | " "*) ;;
*) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
@@ -10626,7 +10904,7 @@
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_static_works=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -10645,13 +10923,13 @@
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_static_works"; then
:
else
lt_prog_compiler_static=
@@ -10771,8 +11049,8 @@
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
$as_echo_n "checking if we can lock with hard links... " >&6; }
@@ -10784,9 +11062,9 @@
ln conftest.a conftest.b 2>/dev/null && hard_links=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
$as_echo "$hard_links" >&6; }
- if test "$hard_links" = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ if test no = "$hard_links"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
need_locks=warn
fi
else
@@ -10829,9 +11107,9 @@
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
@@ -10846,7 +11124,7 @@
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
with_gnu_ld=no
fi
;;
@@ -10854,7 +11132,7 @@
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
- openbsd*)
+ openbsd* | bitrig*)
with_gnu_ld=no
;;
esac
@@ -10864,7 +11142,7 @@
# On some targets, GNU ld is compatible enough with the native linker
# that we're better off using the native interface for both.
lt_use_gnu_ld_interface=no
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
case $host_os in
aix*)
# The AIX port of GNU ld has always aspired to compatibility
@@ -10886,24 +11164,24 @@
esac
fi
- if test "$lt_use_gnu_ld_interface" = yes; then
+ if test yes = "$lt_use_gnu_ld_interface"; then
# If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
+ wlarc='$wl'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ export_dynamic_flag_spec='$wl--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
whole_archive_flag_spec=
fi
supports_anon_versioning=no
- case `$LD -v 2>&1` in
+ case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
*GNU\ gold*) supports_anon_versioning=yes ;;
*\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -10916,7 +11194,7 @@
case $host_os in
aix[3-9]*)
# On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
+ if test ia64 != "$host_cpu"; then
ld_shlibs=no
cat <<_LT_EOF 1>&2
@@ -10935,7 +11213,7 @@
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
archive_expsym_cmds=''
;;
m68k)
@@ -10951,7 +11229,7 @@
allow_undefined_flag=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
ld_shlibs=no
fi
@@ -10961,7 +11239,7 @@
# _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
- export_dynamic_flag_spec='${wl}--export-all-symbols'
+ export_dynamic_flag_spec='$wl--export-all-symbols'
allow_undefined_flag=unsupported
always_export_symbols=no
enable_shared_with_static_runtimes=yes
@@ -10969,61 +11247,89 @@
exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
ld_shlibs=no
fi
;;
haiku*)
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
link_all_deplibs=yes
;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
interix[3-9]*)
hardcode_direct=no
hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
+ if test linux-dietlibc = "$host_os"; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
+ && test no = "$tmp_diet"
then
tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group f77 and f90 compilers
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
@@ -11034,42 +11340,47 @@
lf95*) # Lahey Fortran 8.1
whole_archive_flag_spec=
tmp_sharedflag='--shared' ;;
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
nvcc*) # Cuda Compiler Driver 2.2
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
compiler_needs_object=yes
;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
compiler_needs_object=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
- archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
+ tcc*)
+ export_dynamic_flag_spec='-rdynamic'
+ ;;
xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
@@ -11083,8 +11394,8 @@
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
@@ -11102,8 +11413,8 @@
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
@@ -11115,7 +11426,7 @@
ld_shlibs=no
cat <<_LT_EOF 1>&2
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
@@ -11130,9 +11441,9 @@
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
@@ -11149,15 +11460,15 @@
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
esac
- if test "$ld_shlibs" = no; then
+ if test no = "$ld_shlibs"; then
runpath_var=
hardcode_libdir_flag_spec=
export_dynamic_flag_spec=
@@ -11173,7 +11484,7 @@
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
hardcode_minus_L=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
hardcode_direct=unsupported
@@ -11181,34 +11492,57 @@
;;
aix[4-9]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global
- # defined symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
aix_use_runtimelinking=yes
break
fi
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
@@ -11227,13 +11561,21 @@
hardcode_direct_absolute=yes
hardcode_libdir_separator=':'
link_all_deplibs=yes
- file_list_spec='${wl}-f,'
+ file_list_spec='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ ;;
+ esac
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
case $host_os in aix4.[012]|aix4.[012].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
@@ -11252,35 +11594,42 @@
;;
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- export_dynamic_flag_spec='${wl}-bexpall'
+ export_dynamic_flag_spec='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
always_export_symbols=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
allow_undefined_flag='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
- if test "${lt_cv_aix_libpath+set}" = set; then
+ if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
if ${lt_cv_aix_libpath_+:} false; then :
@@ -11315,7 +11664,7 @@
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
if test -z "$lt_cv_aix_libpath_"; then
- lt_cv_aix_libpath_="/usr/lib:/lib"
+ lt_cv_aix_libpath_=/usr/lib:/lib
fi
fi
@@ -11323,17 +11672,17 @@
aix_libpath=$lt_cv_aix_libpath_
fi
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib'
allow_undefined_flag="-z nodefs"
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
- if test "${lt_cv_aix_libpath+set}" = set; then
+ if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
if ${lt_cv_aix_libpath_+:} false; then :
@@ -11368,7 +11717,7 @@
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
if test -z "$lt_cv_aix_libpath_"; then
- lt_cv_aix_libpath_="/usr/lib:/lib"
+ lt_cv_aix_libpath_=/usr/lib:/lib
fi
fi
@@ -11376,21 +11725,33 @@
aix_libpath=$lt_cv_aix_libpath_
fi
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- no_undefined_flag=' ${wl}-bernotok'
- allow_undefined_flag=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ no_undefined_flag=' $wl-bernotok'
+ allow_undefined_flag=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec='$convenience'
fi
archive_cmds_need_lc=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
@@ -11399,7 +11760,7 @@
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
archive_expsym_cmds=''
;;
m68k)
@@ -11429,16 +11790,17 @@
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
enable_shared_with_static_runtimes=yes
@@ -11447,18 +11809,18 @@
# Don't use ranlib
old_postinstall_cmds='chmod 644 $oldlib'
postlink_cmds='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# Assume MSVC wrapper
@@ -11467,7 +11829,7 @@
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
@@ -11486,24 +11848,24 @@
hardcode_direct=no
hardcode_automatic=yes
hardcode_shlibpath_var=unsupported
- if test "$lt_cv_ld_force_load" = "yes"; then
- whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ if test yes = "$lt_cv_ld_force_load"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
else
whole_archive_flag_spec=''
fi
link_all_deplibs=yes
- allow_undefined_flag="$_lt_dar_allow_undefined"
+ allow_undefined_flag=$_lt_dar_allow_undefined
case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
- if test "$_lt_dar_can_shared" = "yes"; then
+ if test yes = "$_lt_dar_can_shared"; then
output_verbose_link_cmd=func_echo_all
- archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
else
ld_shlibs=no
@@ -11545,33 +11907,33 @@
;;
hpux9*)
- if test "$GCC" = yes; then
- archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GCC"; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
- archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
fi
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
;;
hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
@@ -11579,25 +11941,25 @@
;;
hpux11*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ if test yes,no = "$GCC,$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
@@ -11609,7 +11971,7 @@
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler__b=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS -b"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -11628,14 +11990,14 @@
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
$as_echo "$lt_cv_prog_compiler__b" >&6; }
-if test x"$lt_cv_prog_compiler__b" = xyes; then
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+if test yes = "$lt_cv_prog_compiler__b"; then
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
@@ -11643,8 +12005,8 @@
;;
esac
fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
case $host_cpu in
@@ -11655,7 +12017,7 @@
*)
hardcode_direct=yes
hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
@@ -11666,8 +12028,8 @@
;;
irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
@@ -11677,8 +12039,8 @@
if ${lt_cv_irix_exported_symbol+:} false; then :
$as_echo_n "(cached) " >&6
else
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int foo (void) { return 0; }
@@ -11690,24 +12052,34 @@
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
$as_echo "$lt_cv_irix_exported_symbol" >&6; }
- if test "$lt_cv_irix_exported_symbol" = yes; then
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
fi
else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
fi
archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
inherit_rpath=yes
link_all_deplibs=yes
;;
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ ld_shlibs=yes
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
@@ -11722,7 +12094,7 @@
newsos6)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
hardcode_shlibpath_var=no
;;
@@ -11730,27 +12102,19 @@
*nto* | *qnx*)
;;
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
hardcode_direct=yes
hardcode_shlibpath_var=no
hardcode_direct_absolute=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
fi
else
ld_shlibs=no
@@ -11761,33 +12125,53 @@
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
- archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
;;
osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
fi
archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
@@ -11798,24 +12182,24 @@
solaris*)
no_undefined_flag=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
- wlarc='${wl}'
- archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ wlarc='$wl'
+ archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
@@ -11825,11 +12209,11 @@
solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ if test yes = "$GCC"; then
+ whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
else
whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
fi
@@ -11839,10 +12223,10 @@
;;
sunos4*)
- if test "x$host_vendor" = xsequent; then
+ if test sequent = "$host_vendor"; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
@@ -11891,43 +12275,43 @@
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag='${wl}-z,text'
+ no_undefined_flag='$wl-z,text'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- no_undefined_flag='${wl}-z,text'
- allow_undefined_flag='${wl}-z,nodefs'
+ no_undefined_flag='$wl-z,text'
+ allow_undefined_flag='$wl-z,nodefs'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_flag_spec='$wl-R,$libdir'
hardcode_libdir_separator=':'
link_all_deplibs=yes
- export_dynamic_flag_spec='${wl}-Bexport'
+ export_dynamic_flag_spec='$wl-Bexport'
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
@@ -11942,10 +12326,10 @@
;;
esac
- if test x$host_vendor = xsni; then
+ if test sni = "$host_vendor"; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- export_dynamic_flag_spec='${wl}-Blargedynsym'
+ export_dynamic_flag_spec='$wl-Blargedynsym'
;;
esac
fi
@@ -11953,7 +12337,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
$as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
+test no = "$ld_shlibs" && can_build_shared=no
with_gnu_ld=$with_gnu_ld
@@ -11979,7 +12363,7 @@
# Assume -lc should be added
archive_cmds_need_lc=yes
- if test "$enable_shared" = yes && test "$GCC" = yes; then
+ if test yes,yes = "$GCC,$enable_shared"; then
case $archive_cmds in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
@@ -12194,14 +12578,14 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
$as_echo_n "checking dynamic linker characteristics... " >&6; }
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
esac
case $host_os in
- mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
- *) lt_sed_strip_eq="s,=/,/,g" ;;
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
esac
lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
case $lt_search_path_spec in
@@ -12217,28 +12601,35 @@
;;
esac
# Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
+ # and add multilib dir if necessary...
lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
lt_count++;
} else {
if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
+ lt_foo = "/" $lt_i lt_foo;
} else {
lt_count--;
}
@@ -12252,7 +12643,7 @@
# for these hosts.
case $host_os in
mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
- $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+ $SED 's|/\([A-Za-z]:\)|\1|g'` ;;
esac
sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
@@ -12261,7 +12652,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
@@ -12278,14 +12669,16 @@
# flags to be left without arguments
need_version=unknown
+
+
case $host_os in
aix3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
+ soname_spec='$libname$release$shared_ext$major'
;;
aix[4-9]*)
@@ -12293,41 +12686,91 @@
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a(lib.so.V)'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
shlibpath_var=LIBPATH
fi
;;
@@ -12337,18 +12780,18 @@
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
- library_names_spec='${libname}${shared_ext}'
+ library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
@@ -12356,8 +12799,8 @@
bsdi[45]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -12369,7 +12812,7 @@
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
- shrext_cmds=".dll"
+ shrext_cmds=.dll
need_version=no
need_lib_prefix=no
@@ -12378,8 +12821,8 @@
# gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
@@ -12395,17 +12838,17 @@
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
;;
esac
dynamic_linker='Win32 ld.exe'
@@ -12414,8 +12857,8 @@
*,cl*)
# Native MSVC
libname_spec='$name'
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- library_names_spec='${libname}.dll.lib'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
case $build_os in
mingw*)
@@ -12442,7 +12885,7 @@
sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
;;
*)
- sys_lib_search_path_spec="$LIB"
+ sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
# It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -12455,8 +12898,8 @@
esac
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
@@ -12469,7 +12912,7 @@
*)
# Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
dynamic_linker='Win32 ld.exe'
;;
esac
@@ -12482,8 +12925,8 @@
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -12496,8 +12939,8 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -12515,12 +12958,13 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
@@ -12545,26 +12989,15 @@
esac
;;
-gnu*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
@@ -12582,14 +13015,15 @@
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
@@ -12597,8 +13031,8 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
@@ -12607,8 +13041,8 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -12621,8 +13055,8 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -12633,7 +13067,7 @@
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
@@ -12641,8 +13075,8 @@
esac
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
@@ -12661,8 +13095,8 @@
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
@@ -12671,13 +13105,33 @@
dynamic_linker=no
;;
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -12721,7 +13175,12 @@
# before this can be enabled.
hardcode_into_libs=yes
- # Append ld.so.conf contents to the search path
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
@@ -12741,12 +13200,12 @@
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
@@ -12756,7 +13215,7 @@
newsos6)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
@@ -12765,58 +13224,68 @@
version_type=qnx
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='ldqnx.so'
;;
-openbsd*)
+openbsd* | bitrig*)
version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
+ else
+ need_version=yes
+ fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
+ shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
- shrext_cmds=".dll"
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
@@ -12827,8 +13296,8 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
@@ -12838,11 +13307,11 @@
sunos4*)
version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
@@ -12850,8 +13319,8 @@
sysv4 | sysv4.3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
@@ -12872,24 +13341,24 @@
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
+ version_type=sco
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -12907,7 +13376,7 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
@@ -12915,8 +13384,8 @@
uts4*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -12926,20 +13395,35 @@
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
@@ -13036,15 +13520,15 @@
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" ||
test -n "$runpath_var" ||
- test "X$hardcode_automatic" = "Xyes" ; then
+ test yes = "$hardcode_automatic"; then
# We can hardcode non-existent directories.
- if test "$hardcode_direct" != no &&
+ if test no != "$hardcode_direct" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
- test "$hardcode_minus_L" != no; then
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" &&
+ test no != "$hardcode_minus_L"; then
# Linking always hardcodes the temporary library directory.
hardcode_action=relink
else
@@ -13059,12 +13543,12 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
$as_echo "$hardcode_action" >&6; }
-if test "$hardcode_action" = relink ||
- test "$inherit_rpath" = yes; then
+if test relink = "$hardcode_action" ||
+ test yes = "$inherit_rpath"; then
# Fast installation is not supported
enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
@@ -13074,7 +13558,7 @@
- if test "x$enable_dlopen" != xyes; then
+ if test yes != "$enable_dlopen"; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
@@ -13084,23 +13568,23 @@
case $host_os in
beos*)
- lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen=load_add_on
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen=LoadLibrary
lt_cv_dlopen_libs=
;;
cygwin*)
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
;;
darwin*)
- # if libdl is installed we need to link against it
+ # if libdl is installed we need to link against it
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
if ${ac_cv_lib_dl_dlopen+:} false; then :
@@ -13138,10 +13622,10 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
else
- lt_cv_dlopen="dyld"
+ lt_cv_dlopen=dyld
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
@@ -13149,10 +13633,18 @@
;;
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
*)
ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
if test "x$ac_cv_func_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load"
+ lt_cv_dlopen=shl_load
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
$as_echo_n "checking for shl_load in -ldld... " >&6; }
@@ -13191,11 +13683,11 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+ lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld
else
ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
if test "x$ac_cv_func_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
@@ -13234,7 +13726,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
$as_echo_n "checking for dlopen in -lsvld... " >&6; }
@@ -13273,7 +13765,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
$as_echo_n "checking for dld_link in -ldld... " >&6; }
@@ -13312,7 +13804,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+ lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld
fi
@@ -13333,21 +13825,21 @@
;;
esac
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
+ if test no = "$lt_cv_dlopen"; then
enable_dlopen=no
+ else
+ enable_dlopen=yes
fi
case $lt_cv_dlopen in
dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- save_LIBS="$LIBS"
+ save_LIBS=$LIBS
LIBS="$lt_cv_dlopen_libs $LIBS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
@@ -13355,7 +13847,7 @@
if ${lt_cv_dlopen_self+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test "$cross_compiling" = yes; then :
+ if test yes = "$cross_compiling"; then :
lt_cv_dlopen_self=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -13402,9 +13894,9 @@
# endif
#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
@@ -13434,7 +13926,7 @@
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
@@ -13454,14 +13946,14 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
$as_echo "$lt_cv_dlopen_self" >&6; }
- if test "x$lt_cv_dlopen_self" = xyes; then
+ if test yes = "$lt_cv_dlopen_self"; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
if ${lt_cv_dlopen_self_static+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test "$cross_compiling" = yes; then :
+ if test yes = "$cross_compiling"; then :
lt_cv_dlopen_self_static=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -13508,9 +14000,9 @@
# endif
#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
@@ -13540,7 +14032,7 @@
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
@@ -13561,9 +14053,9 @@
$as_echo "$lt_cv_dlopen_self_static" >&6; }
fi
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
;;
esac
@@ -13607,7 +14099,7 @@
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
- if test -n "$STRIP" ; then
+ if test -n "$STRIP"; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
@@ -13635,7 +14127,7 @@
- # Report which library types will actually be built
+ # Report what library types will actually be built
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
$as_echo_n "checking if libtool supports shared libraries... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
@@ -13643,13 +14135,13 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
$as_echo_n "checking whether to build shared libraries... " >&6; }
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
@@ -13657,8 +14149,12 @@
;;
aix[4-9]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -13668,7 +14164,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
$as_echo_n "checking whether to build static libraries... " >&6; }
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
$as_echo "$enable_static" >&6; }
@@ -13682,11 +14178,11 @@
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-CC="$lt_save_CC"
+CC=$lt_save_CC
- if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
+ if test -n "$CXX" && ( test no != "$CXX" &&
+ ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+ (test g++ != "$CXX"))); then
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -13865,7 +14361,7 @@
# the CXX compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
+if test yes != "$_lt_caught_CXX_error"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
@@ -13926,46 +14422,39 @@
CFLAGS=$CXXFLAGS
compiler=$CC
compiler_CXX=$CC
- for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+ func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
if test -n "$compiler"; then
# We don't want -fno-exception when compiling C++ code, so set the
# no_builtin_flag separately
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
else
lt_prog_compiler_no_builtin_flag_CXX=
fi
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
# Set up default GNU C++ configuration
# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+ withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
else
with_gnu_ld=no
fi
ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
$as_echo_n "checking for ld used by $CC... " >&6; }
case $host in
*-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
+ # gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -13979,7 +14468,7 @@
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
- test -z "$LD" && LD="$ac_prog"
+ test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
@@ -13990,7 +14479,7 @@
with_gnu_ld=unknown
;;
esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
$as_echo_n "checking for GNU ld... " >&6; }
else
@@ -14001,32 +14490,32 @@
$as_echo_n "(cached) " >&6
else
if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
+ test no != "$with_gnu_ld" && break
;;
*)
- test "$with_gnu_ld" != yes && break
+ test yes != "$with_gnu_ld" && break
;;
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
fi
fi
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
if test -n "$LD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
$as_echo "$LD" >&6; }
@@ -14062,22 +14551,22 @@
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ if test yes = "$with_gnu_ld"; then
+ archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+ export_dynamic_flag_spec_CXX='$wl--export-dynamic'
# If archive_cmds runs LD, not CC, wlarc should be empty
# XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
# investigate it a little bit more. (MM)
- wlarc='${wl}'
+ wlarc='$wl'
# ancient GNU ld didn't support --whole-archive et. al.
if eval "`$CC -print-prog-name=ld` --help 2>&1" |
$GREP 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
whole_archive_flag_spec_CXX=
fi
@@ -14114,18 +14603,30 @@
ld_shlibs_CXX=no
;;
aix[4-9]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
for ld_flag in $LDFLAGS; do
case $ld_flag in
@@ -14135,6 +14636,13 @@
;;
esac
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
@@ -14153,13 +14661,21 @@
hardcode_direct_absolute_CXX=yes
hardcode_libdir_separator_CXX=':'
link_all_deplibs_CXX=yes
- file_list_spec_CXX='${wl}-f,'
+ file_list_spec_CXX='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ hardcode_direct_CXX=no
+ hardcode_direct_absolute_CXX=no
+ ;;
+ esac
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
case $host_os in aix4.[012]|aix4.[012].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
@@ -14177,36 +14693,44 @@
fi
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag=$shared_flag' $wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- export_dynamic_flag_spec_CXX='${wl}-bexpall'
+ export_dynamic_flag_spec_CXX='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to
# export.
always_export_symbols_CXX=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
- allow_undefined_flag_CXX='-berok'
+ # The "-G" linker flag allows undefined symbols.
+ no_undefined_flag_CXX='-bernotok'
# Determine the default libpath from the value encoded in an empty
# executable.
- if test "${lt_cv_aix_libpath+set}" = set; then
+ if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
if ${lt_cv_aix_libpath__CXX+:} false; then :
@@ -14241,7 +14765,7 @@
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
if test -z "$lt_cv_aix_libpath__CXX"; then
- lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+ lt_cv_aix_libpath__CXX=/usr/lib:/lib
fi
fi
@@ -14249,18 +14773,18 @@
aix_libpath=$lt_cv_aix_libpath__CXX
fi
- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+ hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ hardcode_libdir_flag_spec_CXX='$wl-R $libdir:/usr/lib:/lib'
allow_undefined_flag_CXX="-z nodefs"
- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
- if test "${lt_cv_aix_libpath+set}" = set; then
+ if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
if ${lt_cv_aix_libpath__CXX+:} false; then :
@@ -14295,7 +14819,7 @@
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
if test -z "$lt_cv_aix_libpath__CXX"; then
- lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+ lt_cv_aix_libpath__CXX=/usr/lib:/lib
fi
fi
@@ -14303,22 +14827,34 @@
aix_libpath=$lt_cv_aix_libpath__CXX
fi
- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+ hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- no_undefined_flag_CXX=' ${wl}-bernotok'
- allow_undefined_flag_CXX=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ no_undefined_flag_CXX=' $wl-bernotok'
+ allow_undefined_flag_CXX=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec_CXX='$convenience'
fi
archive_cmds_need_lc_CXX=yes
- # This is similar to how AIX traditionally builds its shared
- # libraries.
- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ archive_expsym_cmds_CXX='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared
+ # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+ archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
@@ -14328,7 +14864,7 @@
allow_undefined_flag_CXX=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
ld_shlibs_CXX=no
fi
@@ -14356,57 +14892,58 @@
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ archive_expsym_cmds_CXX='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
enable_shared_with_static_runtimes_CXX=yes
# Don't use ranlib
old_postinstall_cmds_CXX='chmod 644 $oldlib'
postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- func_to_tool_file "$lt_outputfile"~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# g++
# _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec_CXX='-L$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
+ export_dynamic_flag_spec_CXX='$wl--export-all-symbols'
allow_undefined_flag_CXX=unsupported
always_export_symbols_CXX=no
enable_shared_with_static_runtimes_CXX=yes
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ archive_expsym_cmds_CXX='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
ld_shlibs_CXX=no
fi
@@ -14420,27 +14957,27 @@
hardcode_direct_CXX=no
hardcode_automatic_CXX=yes
hardcode_shlibpath_var_CXX=unsupported
- if test "$lt_cv_ld_force_load" = "yes"; then
- whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ if test yes = "$lt_cv_ld_force_load"; then
+ whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
else
whole_archive_flag_spec_CXX=''
fi
link_all_deplibs_CXX=yes
- allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
+ allow_undefined_flag_CXX=$_lt_dar_allow_undefined
case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
- if test "$_lt_dar_can_shared" = "yes"; then
+ if test yes = "$_lt_dar_can_shared"; then
output_verbose_link_cmd=func_echo_all
- archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
- if test "$lt_cv_apple_cc_single_mod" != "yes"; then
- archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
- archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ module_expsym_cmds_CXX="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+ if test yes != "$lt_cv_apple_cc_single_mod"; then
+ archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+ archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
fi
else
@@ -14449,6 +14986,34 @@
;;
+ os2*)
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ hardcode_minus_L_CXX=yes
+ allow_undefined_flag_CXX=unsupported
+ shrext_cmds=.dll
+ archive_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds_CXX='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes_CXX=yes
+ ;;
+
dgux*)
case $cc_basename in
ec++*)
@@ -14483,18 +15048,15 @@
ld_shlibs_CXX=yes
;;
- gnu*)
- ;;
-
haiku*)
- archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
link_all_deplibs_CXX=yes
;;
hpux9*)
- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
hardcode_libdir_separator_CXX=:
- export_dynamic_flag_spec_CXX='${wl}-E'
+ export_dynamic_flag_spec_CXX='$wl-E'
hardcode_direct_CXX=yes
hardcode_minus_L_CXX=yes # Not in the search PATH,
# but as the default
@@ -14506,7 +15068,7 @@
ld_shlibs_CXX=no
;;
aCC*)
- archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
@@ -14515,11 +15077,11 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes; then
- archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GXX"; then
+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
@@ -14529,15 +15091,15 @@
;;
hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
hardcode_libdir_separator_CXX=:
case $host_cpu in
hppa*64*|ia64*)
;;
*)
- export_dynamic_flag_spec_CXX='${wl}-E'
+ export_dynamic_flag_spec_CXX='$wl-E'
;;
esac
fi
@@ -14563,13 +15125,13 @@
aCC*)
case $host_cpu in
hppa*64*)
- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_cmds_CXX='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
# Commands to make compiler produce verbose output that lists
@@ -14580,20 +15142,20 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_cmds_CXX='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
fi
@@ -14608,22 +15170,22 @@
interix[3-9]*)
hardcode_direct_CXX=no
hardcode_shlibpath_var_CXX=no
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_CXX='${wl}-E'
+ hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds_CXX='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
irix5* | irix6*)
case $cc_basename in
CC*)
# SGI C++
- archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
@@ -14632,22 +15194,22 @@
old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
;;
*)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
- archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
fi
fi
link_all_deplibs_CXX=yes
;;
esac
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
hardcode_libdir_separator_CXX=:
inherit_rpath_CXX=yes
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -14655,8 +15217,8 @@
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
@@ -14665,10 +15227,10 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='$wl--export-dynamic'
# Archives containing C++ object files must be created using
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
@@ -14682,59 +15244,59 @@
# earlier do not add the objects themselves.
case `$CC -V 2>&1` in
*"Version 7."*)
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 8.0 or newer
tmp_idyn=
case $host_cpu in
ia64*) tmp_idyn=' -i_dynamic';;
esac
- archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
archive_cmds_need_lc_CXX=no
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
- whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+ export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+ whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
;;
pgCC* | pgcpp*)
# Portland Group C++ compiler
case `$CC -V` in
*pgCC\ [1-5].* | *pgcpp\ [1-5].*)
prelink_cmds_CXX='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
- compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
old_archive_cmds_CXX='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
- $RANLIB $oldlib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
archive_cmds_CXX='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
archive_expsym_cmds_CXX='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 6 and above use weak symbols
- archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
- hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
- whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ hardcode_libdir_flag_spec_CXX='$wl--rpath $wl$libdir'
+ export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+ whole_archive_flag_spec_CXX='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
;;
cxx*)
# Compaq C++
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols'
runpath_var=LD_RUN_PATH
hardcode_libdir_flag_spec_CXX='-rpath $libdir'
@@ -14748,18 +15310,18 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
;;
xl* | mpixl* | bgxl*)
# IBM XL 8.0 on PPC, with GNU ld
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
- archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+ export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+ archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
;;
*)
@@ -14767,10 +15329,10 @@
*Sun\ C*)
# Sun C++ 5.9
no_undefined_flag_CXX=' -zdefs'
- archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
hardcode_libdir_flag_spec_CXX='-R$libdir'
- whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec_CXX='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
compiler_needs_object_CXX=yes
# Not sure whether something based on
@@ -14828,22 +15390,17 @@
ld_shlibs_CXX=yes
;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- ld_shlibs_CXX=no
- ;;
-
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
hardcode_direct_CXX=yes
hardcode_shlibpath_var_CXX=no
hardcode_direct_absolute_CXX=yes
archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- export_dynamic_flag_spec_CXX='${wl}-E'
- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+ export_dynamic_flag_spec_CXX='$wl-E'
+ whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
fi
output_verbose_link_cmd=func_echo_all
else
@@ -14859,9 +15416,9 @@
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
hardcode_libdir_separator_CXX=:
# Archives containing C++ object files must be created using
@@ -14879,17 +15436,17 @@
cxx*)
case $host in
osf3*)
- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
+ archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
;;
*)
allow_undefined_flag_CXX=' -expect_unresolved \*'
- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
- $RM $lib.exp'
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+ $RM $lib.exp'
hardcode_libdir_flag_spec_CXX='-rpath $libdir'
;;
esac
@@ -14904,21 +15461,21 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
case $host in
osf3*)
- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds_CXX='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
*)
- archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
esac
- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
hardcode_libdir_separator_CXX=:
# Commands to make compiler produce verbose output that lists
@@ -14964,9 +15521,9 @@
# Sun C++ 4.2, 5.x and Centerline C++
archive_cmds_need_lc_CXX=yes
no_undefined_flag_CXX=' -zdefs'
- archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
hardcode_libdir_flag_spec_CXX='-R$libdir'
hardcode_shlibpath_var_CXX=no
@@ -14974,7 +15531,7 @@
solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
+ # but understands '-z linker_flag'.
# Supported since Solaris 2.6 (maybe 2.5.1?)
whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
;;
@@ -14991,30 +15548,30 @@
;;
gcx*)
# Green Hills C++ Compiler
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
# The C++ compiler must be used to create the archive.
old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
;;
*)
# GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ no_undefined_flag_CXX=' $wl-z ${wl}defs'
if $CC --version | $GREP -v '^2\.7' > /dev/null; then
- archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # g++ 2.7 appears to require '-G' NOT '-shared' on this
# platform.
- archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ archive_cmds_CXX='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
@@ -15022,11 +15579,11 @@
output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
fi
- hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+ hardcode_libdir_flag_spec_CXX='$wl-R $wl$libdir'
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
- whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ whole_archive_flag_spec_CXX='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
;;
esac
fi
@@ -15035,52 +15592,52 @@
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag_CXX='${wl}-z,text'
+ no_undefined_flag_CXX='$wl-z,text'
archive_cmds_need_lc_CXX=no
hardcode_shlibpath_var_CXX=no
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
- archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- no_undefined_flag_CXX='${wl}-z,text'
- allow_undefined_flag_CXX='${wl}-z,nodefs'
+ no_undefined_flag_CXX='$wl-z,text'
+ allow_undefined_flag_CXX='$wl-z,nodefs'
archive_cmds_need_lc_CXX=no
hardcode_shlibpath_var_CXX=no
- hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir'
+ hardcode_libdir_flag_spec_CXX='$wl-R,$libdir'
hardcode_libdir_separator_CXX=':'
link_all_deplibs_CXX=yes
- export_dynamic_flag_spec_CXX='${wl}-Bexport'
+ export_dynamic_flag_spec_CXX='$wl-Bexport'
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
- archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
- '"$old_archive_cmds_CXX"
+ '"$old_archive_cmds_CXX"
reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
- '"$reload_cmds_CXX"
+ '"$reload_cmds_CXX"
;;
*)
- archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
@@ -15112,10 +15669,10 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
$as_echo "$ld_shlibs_CXX" >&6; }
- test "$ld_shlibs_CXX" = no && can_build_shared=no
+ test no = "$ld_shlibs_CXX" && can_build_shared=no
- GCC_CXX="$GXX"
- LD_CXX="$LD"
+ GCC_CXX=$GXX
+ LD_CXX=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -15159,13 +15716,13 @@
pre_test_object_deps_done=no
for p in `eval "$output_verbose_link_cmd"`; do
- case ${prev}${p} in
+ case $prev$p in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
# Remove the space.
- if test $p = "-L" ||
- test $p = "-R"; then
+ if test x-L = "$p" ||
+ test x-R = "$p"; then
prev=$p
continue
fi
@@ -15181,16 +15738,16 @@
case $p in
=*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
esac
- if test "$pre_test_object_deps_done" = no; then
- case ${prev} in
+ if test no = "$pre_test_object_deps_done"; then
+ case $prev in
-L | -R)
# Internal compiler library paths should come after those
# provided the user. The postdeps already come after the
# user supplied libs so there is no need to process them.
if test -z "$compiler_lib_search_path_CXX"; then
- compiler_lib_search_path_CXX="${prev}${p}"
+ compiler_lib_search_path_CXX=$prev$p
else
- compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+ compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} $prev$p"
fi
;;
# The "-l" case would never come before the object being
@@ -15198,9 +15755,9 @@
esac
else
if test -z "$postdeps_CXX"; then
- postdeps_CXX="${prev}${p}"
+ postdeps_CXX=$prev$p
else
- postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+ postdeps_CXX="${postdeps_CXX} $prev$p"
fi
fi
prev=
@@ -15215,15 +15772,15 @@
continue
fi
- if test "$pre_test_object_deps_done" = no; then
+ if test no = "$pre_test_object_deps_done"; then
if test -z "$predep_objects_CXX"; then
- predep_objects_CXX="$p"
+ predep_objects_CXX=$p
else
predep_objects_CXX="$predep_objects_CXX $p"
fi
else
if test -z "$postdep_objects_CXX"; then
- postdep_objects_CXX="$p"
+ postdep_objects_CXX=$p
else
postdep_objects_CXX="$postdep_objects_CXX $p"
fi
@@ -15253,51 +15810,6 @@
postdep_objects_CXX=
postdeps_CXX=
;;
-
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
-
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- if test "$solaris_use_stlport4" != yes; then
- postdeps_CXX='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-
-solaris*)
- case $cc_basename in
- CC* | sunCC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- postdeps_CXX='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
esac
@@ -15306,7 +15818,7 @@
esac
compiler_lib_search_dirs_CXX=
if test -n "${compiler_lib_search_path_CXX}"; then
- compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | $SED -e 's! -L! !g' -e 's!^ !!'`
fi
@@ -15345,17 +15857,18 @@
# C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_static_CXX='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static_CXX='-Bstatic'
fi
+ lt_prog_compiler_pic_CXX='-fPIC'
;;
amigaos*)
@@ -15366,8 +15879,8 @@
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
;;
esac
@@ -15382,6 +15895,11 @@
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static_CXX='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
# PIC is the default on this platform
@@ -15431,7 +15949,7 @@
case $host_os in
aix[4-9]*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static_CXX='-Bstatic'
else
@@ -15471,14 +15989,14 @@
case $cc_basename in
CC*)
lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
- if test "$host_cpu" != ia64; then
+ lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
+ if test ia64 != "$host_cpu"; then
lt_prog_compiler_pic_CXX='+Z'
fi
;;
aCC*)
lt_prog_compiler_wl_CXX='-Wl,'
- lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+ lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
@@ -15507,7 +16025,7 @@
;;
esac
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# KAI C++ Compiler
@@ -15515,7 +16033,7 @@
lt_prog_compiler_pic_CXX='-fPIC'
;;
ecpc* )
- # old Intel C++ for x86_64 which still supported -KPIC.
+ # old Intel C++ for x86_64, which still supported -KPIC.
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_pic_CXX='-KPIC'
lt_prog_compiler_static_CXX='-static'
@@ -15660,7 +16178,7 @@
fi
case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
+ # For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic_CXX=
;;
@@ -15692,7 +16210,7 @@
lt_cv_prog_compiler_pic_works_CXX=no
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+ lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
@@ -15722,7 +16240,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
-if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
+if test yes = "$lt_cv_prog_compiler_pic_works_CXX"; then
case $lt_prog_compiler_pic_CXX in
"" | " "*) ;;
*) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
@@ -15748,7 +16266,7 @@
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_static_works_CXX=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -15767,13 +16285,13 @@
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
-if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
+if test yes = "$lt_cv_prog_compiler_static_works_CXX"; then
:
else
lt_prog_compiler_static_CXX=
@@ -15887,8 +16405,8 @@
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o_CXX" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
$as_echo_n "checking if we can lock with hard links... " >&6; }
@@ -15900,9 +16418,9 @@
ln conftest.a conftest.b 2>/dev/null && hard_links=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
$as_echo "$hard_links" >&6; }
- if test "$hard_links" = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ if test no = "$hard_links"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
need_locks=warn
fi
else
@@ -15919,17 +16437,21 @@
case $host_os in
aix[4-9]*)
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global defined
- # symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds_CXX='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
- export_symbols_cmds_CXX="$ltdll_cmds"
+ export_symbols_cmds_CXX=$ltdll_cmds
;;
cygwin* | mingw* | cegcc*)
case $cc_basename in
@@ -15949,7 +16471,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
$as_echo "$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
+test no = "$ld_shlibs_CXX" && can_build_shared=no
with_gnu_ld_CXX=$with_gnu_ld
@@ -15966,7 +16488,7 @@
# Assume -lc should be added
archive_cmds_need_lc_CXX=yes
- if test "$enable_shared" = yes && test "$GCC" = yes; then
+ if test yes,yes = "$GCC,$enable_shared"; then
case $archive_cmds_CXX in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
@@ -16094,7 +16616,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
@@ -16111,14 +16633,16 @@
# flags to be left without arguments
need_version=unknown
+
+
case $host_os in
aix3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
+ soname_spec='$libname$release$shared_ext$major'
;;
aix[4-9]*)
@@ -16126,41 +16650,91 @@
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a(lib.so.V)'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
shlibpath_var=LIBPATH
fi
;;
@@ -16170,18 +16744,18 @@
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
- library_names_spec='${libname}${shared_ext}'
+ library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
@@ -16189,8 +16763,8 @@
bsdi[45]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -16202,7 +16776,7 @@
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
- shrext_cmds=".dll"
+ shrext_cmds=.dll
need_version=no
need_lib_prefix=no
@@ -16211,8 +16785,8 @@
# gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
@@ -16228,16 +16802,16 @@
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
;;
esac
dynamic_linker='Win32 ld.exe'
@@ -16246,8 +16820,8 @@
*,cl*)
# Native MSVC
libname_spec='$name'
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- library_names_spec='${libname}.dll.lib'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
case $build_os in
mingw*)
@@ -16274,7 +16848,7 @@
sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
;;
*)
- sys_lib_search_path_spec="$LIB"
+ sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
# It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -16287,8 +16861,8 @@
esac
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
@@ -16301,7 +16875,7 @@
*)
# Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
dynamic_linker='Win32 ld.exe'
;;
esac
@@ -16314,8 +16888,8 @@
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -16327,8 +16901,8 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -16346,12 +16920,13 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
@@ -16376,26 +16951,15 @@
esac
;;
-gnu*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
@@ -16413,14 +16977,15 @@
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
@@ -16428,8 +16993,8 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
@@ -16438,8 +17003,8 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -16452,8 +17017,8 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -16464,7 +17029,7 @@
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
@@ -16472,8 +17037,8 @@
esac
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
@@ -16492,8 +17057,8 @@
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
@@ -16502,13 +17067,33 @@
dynamic_linker=no
;;
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ ;;
+
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -16552,7 +17137,12 @@
# before this can be enabled.
hardcode_into_libs=yes
- # Append ld.so.conf contents to the search path
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
@@ -16572,12 +17162,12 @@
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
@@ -16587,7 +17177,7 @@
newsos6)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
@@ -16596,58 +17186,68 @@
version_type=qnx
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='ldqnx.so'
;;
-openbsd*)
+openbsd* | bitrig*)
version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
+ else
+ need_version=yes
+ fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
+ shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
- shrext_cmds=".dll"
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
@@ -16658,8 +17258,8 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
@@ -16669,11 +17269,11 @@
sunos4*)
version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
@@ -16681,8 +17281,8 @@
sysv4 | sysv4.3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
@@ -16703,24 +17303,24 @@
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
+ version_type=sco
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -16738,7 +17338,7 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
@@ -16746,8 +17346,8 @@
uts4*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -16757,20 +17357,32 @@
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
@@ -16813,15 +17425,15 @@
hardcode_action_CXX=
if test -n "$hardcode_libdir_flag_spec_CXX" ||
test -n "$runpath_var_CXX" ||
- test "X$hardcode_automatic_CXX" = "Xyes" ; then
+ test yes = "$hardcode_automatic_CXX"; then
# We can hardcode non-existent directories.
- if test "$hardcode_direct_CXX" != no &&
+ if test no != "$hardcode_direct_CXX" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
- test "$hardcode_minus_L_CXX" != no; then
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" &&
+ test no != "$hardcode_minus_L_CXX"; then
# Linking always hardcodes the temporary library directory.
hardcode_action_CXX=relink
else
@@ -16836,12 +17448,12 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
$as_echo "$hardcode_action_CXX" >&6; }
-if test "$hardcode_action_CXX" = relink ||
- test "$inherit_rpath_CXX" = yes; then
+if test relink = "$hardcode_action_CXX" ||
+ test yes = "$inherit_rpath_CXX"; then
# Fast installation is not supported
enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
@@ -16864,7 +17476,7 @@
lt_cv_path_LD=$lt_save_path_LD
lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
+fi # test yes != "$_lt_caught_CXX_error"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
@@ -17022,9 +17634,9 @@
# Versioning
PCRE_MAJOR="8"
-PCRE_MINOR="36"
+PCRE_MINOR="37"
PCRE_PRERELEASE=""
-PCRE_DATE="2014-09-26"
+PCRE_DATE="2015-04-28"
if test "$PCRE_MINOR" = "08" -o "$PCRE_MINOR" = "09"
then
@@ -19046,13 +19658,13 @@
# (Note: The libpcre*_version bits are m4 variables, assigned above)
EXTRA_LIBPCRE_LDFLAGS="$EXTRA_LIBPCRE_LDFLAGS \
- $NO_UNDEFINED -version-info 3:4:2"
+ $NO_UNDEFINED -version-info 3:5:2"
EXTRA_LIBPCRE16_LDFLAGS="$EXTRA_LIBPCRE16_LDFLAGS \
- $NO_UNDEFINED -version-info 2:4:2"
+ $NO_UNDEFINED -version-info 2:5:2"
EXTRA_LIBPCRE32_LDFLAGS="$EXTRA_LIBPCRE32_LDFLAGS \
- $NO_UNDEFINED -version-info 0:4:0"
+ $NO_UNDEFINED -version-info 0:5:0"
EXTRA_LIBPCREPOSIX_LDFLAGS="$EXTRA_LIBPCREPOSIX_LDFLAGS \
$NO_UNDEFINED -version-info 0:3:0"
@@ -20107,7 +20719,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by PCRE $as_me 8.36, which was
+This file was extended by PCRE $as_me 8.37, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -20173,7 +20785,7 @@
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-PCRE config.status 8.36
+PCRE config.status 8.37
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
@@ -20311,6 +20923,7 @@
enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
@@ -20358,10 +20971,13 @@
GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
@@ -20426,7 +21042,8 @@
finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
@@ -20532,9 +21149,12 @@
compiler \
lt_cv_sys_global_symbol_pipe \
lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
lt_cv_sys_global_symbol_to_c_name_address \
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+lt_cv_nm_interface \
nm_file_list_spec \
+lt_cv_truncate_bin \
lt_prog_compiler_no_builtin_flag \
lt_prog_compiler_pic \
lt_prog_compiler_wl \
@@ -20600,7 +21220,7 @@
compiler_lib_search_path_CXX; do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -20627,7 +21247,8 @@
postuninstall_cmds \
finish_cmds \
sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec \
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path \
reload_cmds_CXX \
old_archive_cmds_CXX \
old_archive_from_new_cmds_CXX \
@@ -20641,7 +21262,7 @@
postlink_cmds_CXX; do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -20650,19 +21271,16 @@
done
ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
PACKAGE='$PACKAGE'
VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
RM='$RM'
ofile='$ofile'
@@ -21384,55 +22002,53 @@
;;
"libtool":C)
- # See if we are running on zsh, and set the options which allow our
+ # See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
+ if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
- cfgfile="${ofile}T"
+ cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Generated automatically by $as_me ($PACKAGE) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
#
-# This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# The names of the tagged configurations supported by this script.
-available_tags="CXX "
+available_tags='CXX '
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
# ### BEGIN LIBTOOL CONFIG
@@ -21461,6 +22077,9 @@
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL
@@ -21572,18 +22191,27 @@
# Transform the output of nm in a proper C declaration.
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
# Transform the output of nm in a C name address pair.
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
# Specify filename containing input files for \$NM.
nm_file_list_spec=$lt_nm_file_list_spec
-# The root where to search for dependent libraries,and in which our libraries should be installed.
+# The root where to search for dependent libraries,and where our libraries should be installed.
lt_sysroot=$lt_sysroot
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
# The name of the directory that contains temporary libtool files.
objdir=$objdir
@@ -21674,8 +22302,11 @@
# Compile-time system search path for libraries.
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
# Whether dlopen is supported.
dlopen_support=$enable_dlopen
@@ -21768,13 +22399,13 @@
# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute
@@ -21840,13 +22471,72 @@
_LT_EOF
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
case $host_os in
aix3*)
cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -21855,7 +22545,7 @@
esac
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
# We use sed instead of cat because bash on DJGPP gets confused if
@@ -21865,165 +22555,6 @@
sed '$q' "$ltmain" >> "$cfgfile" \
|| (rm -f "$cfgfile"; exit 1)
- if test x"$xsi_shell" = xyes; then
- sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-func_dirname ()\
-{\
-\ case ${1} in\
-\ */*) func_dirname_result="${1%/*}${2}" ;;\
-\ * ) func_dirname_result="${3}" ;;\
-\ esac\
-} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_basename ()$/,/^} # func_basename /c\
-func_basename ()\
-{\
-\ func_basename_result="${1##*/}"\
-} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-func_dirname_and_basename ()\
-{\
-\ case ${1} in\
-\ */*) func_dirname_result="${1%/*}${2}" ;;\
-\ * ) func_dirname_result="${3}" ;;\
-\ esac\
-\ func_basename_result="${1##*/}"\
-} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-func_stripname ()\
-{\
-\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-\ # positional parameters, so assign one to ordinary parameter first.\
-\ func_stripname_result=${3}\
-\ func_stripname_result=${func_stripname_result#"${1}"}\
-\ func_stripname_result=${func_stripname_result%"${2}"}\
-} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-func_split_long_opt ()\
-{\
-\ func_split_long_opt_name=${1%%=*}\
-\ func_split_long_opt_arg=${1#*=}\
-} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-func_split_short_opt ()\
-{\
-\ func_split_short_opt_arg=${1#??}\
-\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-func_lo2o ()\
-{\
-\ case ${1} in\
-\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-\ *) func_lo2o_result=${1} ;;\
-\ esac\
-} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_xform ()$/,/^} # func_xform /c\
-func_xform ()\
-{\
- func_xform_result=${1%.*}.lo\
-} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_arith ()$/,/^} # func_arith /c\
-func_arith ()\
-{\
- func_arith_result=$(( $* ))\
-} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_len ()$/,/^} # func_len /c\
-func_len ()\
-{\
- func_len_result=${#1}\
-} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-fi
-
-if test x"$lt_shell_append" = xyes; then
- sed -e '/^func_append ()$/,/^} # func_append /c\
-func_append ()\
-{\
- eval "${1}+=\\${2}"\
-} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-func_append_quoted ()\
-{\
-\ func_quote_for_eval "${2}"\
-\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- # Save a `func_append' function call where possible by direct use of '+='
- sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-else
- # Save a `func_append' function call even when '+=' is not available
- sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-fi
-
-
mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
@@ -22110,13 +22641,13 @@
# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct_CXX
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute_CXX
diff --git a/dist/configure.ac b/dist/configure.ac
index e7dffbe..38d1dba 100644
--- a/dist/configure.ac
+++ b/dist/configure.ac
@@ -9,17 +9,17 @@
dnl be defined as -RC2, for example. For real releases, it should be empty.
m4_define(pcre_major, [8])
-m4_define(pcre_minor, [36])
+m4_define(pcre_minor, [37])
m4_define(pcre_prerelease, [])
-m4_define(pcre_date, [2014-09-26])
+m4_define(pcre_date, [2015-04-28])
# NOTE: The CMakeLists.txt file searches for the above variables in the first
# 50 lines of this file. Please update that if the variables above are moved.
# Libtool shared library interface versions (current:revision:age)
-m4_define(libpcre_version, [3:4:2])
-m4_define(libpcre16_version, [2:4:2])
-m4_define(libpcre32_version, [0:4:0])
+m4_define(libpcre_version, [3:5:2])
+m4_define(libpcre16_version, [2:5:2])
+m4_define(libpcre32_version, [0:5:0])
m4_define(libpcreposix_version, [0:3:0])
m4_define(libpcrecpp_version, [0:1:0])
diff --git a/dist/depcomp b/dist/depcomp
index 4ebd5b3..fc98710 100755
--- a/dist/depcomp
+++ b/dist/depcomp
@@ -3,7 +3,7 @@
scriptversion=2013-05-30.07; # UTC
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
diff --git a/dist/doc/html/NON-AUTOTOOLS-BUILD.txt b/dist/doc/html/NON-AUTOTOOLS-BUILD.txt
index cddf3e0..1c3da84 100644
--- a/dist/doc/html/NON-AUTOTOOLS-BUILD.txt
+++ b/dist/doc/html/NON-AUTOTOOLS-BUILD.txt
@@ -1,6 +1,14 @@
Building PCRE without using autotools
-------------------------------------
+NOTE: This document relates to PCRE releases that use the original API, with
+library names libpcre, libpcre16, and libpcre32. January 2015 saw the first
+release of a new API, known as PCRE2, with release numbers starting at 10.00
+and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old libraries
+(now called PCRE1) are still being maintained for bug fixes, but there will be
+no new development. New projects are advised to use the new PCRE2 libraries.
+
+
This document contains the following sections:
General
@@ -761,4 +769,4 @@
http://www.vsoft-software.com/downloads.html
==========================
-Last Updated: 14 May 2013
+Last Updated: 10 February 2015
diff --git a/dist/doc/html/README.txt b/dist/doc/html/README.txt
index e30bd0f..4887ebf 100644
--- a/dist/doc/html/README.txt
+++ b/dist/doc/html/README.txt
@@ -1,7 +1,16 @@
README file for PCRE (Perl-compatible regular expression library)
-----------------------------------------------------------------
-The latest release of PCRE is always available in three alternative formats
+NOTE: This set of files relates to PCRE releases that use the original API,
+with library names libpcre, libpcre16, and libpcre32. January 2015 saw the
+first release of a new API, known as PCRE2, with release numbers starting at
+10.00 and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old
+libraries (now called PCRE1) are still being maintained for bug fixes, but
+there will be no new development. New projects are advised to use the new PCRE2
+libraries.
+
+
+The latest release of PCRE1 is always available in three alternative formats
from:
ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-xxx.tar.gz
@@ -990,4 +999,4 @@
Philip Hazel
Email local part: ph10
Email domain: cam.ac.uk
-Last updated: 24 October 2014
+Last updated: 10 February 2015
diff --git a/dist/doc/html/pcre.html b/dist/doc/html/pcre.html
index c2b29aa..c87b106 100644
--- a/dist/doc/html/pcre.html
+++ b/dist/doc/html/pcre.html
@@ -13,13 +13,24 @@
man page, in case the conversion went wrong.
<br>
<ul>
-<li><a name="TOC1" href="#SEC1">INTRODUCTION</a>
-<li><a name="TOC2" href="#SEC2">SECURITY CONSIDERATIONS</a>
-<li><a name="TOC3" href="#SEC3">USER DOCUMENTATION</a>
-<li><a name="TOC4" href="#SEC4">AUTHOR</a>
-<li><a name="TOC5" href="#SEC5">REVISION</a>
+<li><a name="TOC1" href="#SEC1">PLEASE TAKE NOTE</a>
+<li><a name="TOC2" href="#SEC2">INTRODUCTION</a>
+<li><a name="TOC3" href="#SEC3">SECURITY CONSIDERATIONS</a>
+<li><a name="TOC4" href="#SEC4">USER DOCUMENTATION</a>
+<li><a name="TOC5" href="#SEC5">AUTHOR</a>
+<li><a name="TOC6" href="#SEC6">REVISION</a>
</ul>
-<br><a name="SEC1" href="#TOC1">INTRODUCTION</a><br>
+<br><a name="SEC1" href="#TOC1">PLEASE TAKE NOTE</a><br>
+<P>
+This document relates to PCRE releases that use the original API,
+with library names libpcre, libpcre16, and libpcre32. January 2015 saw the
+first release of a new API, known as PCRE2, with release numbers starting at
+10.00 and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old
+libraries (now called PCRE1) are still being maintained for bug fixes, but
+there will be no new development. New projects are advised to use the new PCRE2
+libraries.
+</P>
+<br><a name="SEC2" href="#TOC1">INTRODUCTION</a><br>
<P>
The PCRE library is a set of functions that implement regular expression
pattern matching using the same syntax and semantics as Perl, with just a few
@@ -115,7 +126,7 @@
are exported when a shared library is built, and in these cases the
undocumented symbols are not exported.
</P>
-<br><a name="SEC2" href="#TOC1">SECURITY CONSIDERATIONS</a><br>
+<br><a name="SEC3" href="#TOC1">SECURITY CONSIDERATIONS</a><br>
<P>
If you are using PCRE in a non-UTF application that permits users to supply
arbitrary patterns for compilation, you should be aware of a feature that
@@ -149,7 +160,7 @@
<a href="pcreapi.html"><b>pcreapi</b></a>
page.
</P>
-<br><a name="SEC3" href="#TOC1">USER DOCUMENTATION</a><br>
+<br><a name="SEC4" href="#TOC1">USER DOCUMENTATION</a><br>
<P>
The user documentation for PCRE comprises a number of different sections. In
the "man" format, each of these is a separate "man page". In the HTML format,
@@ -188,7 +199,7 @@
In the "man" and HTML formats, there is also a short page for each C library
function, listing its arguments and results.
</P>
-<br><a name="SEC4" href="#TOC1">AUTHOR</a><br>
+<br><a name="SEC5" href="#TOC1">AUTHOR</a><br>
<P>
Philip Hazel
<br>
@@ -202,11 +213,11 @@
taken it away. If you want to email me, use my two initials, followed by the
two digits 10, at the domain cam.ac.uk.
</P>
-<br><a name="SEC5" href="#TOC1">REVISION</a><br>
+<br><a name="SEC6" href="#TOC1">REVISION</a><br>
<P>
-Last updated: 08 January 2014
+Last updated: 10 February 2015
<br>
-Copyright © 1997-2014 University of Cambridge.
+Copyright © 1997-2015 University of Cambridge.
<br>
<p>
Return to the <a href="index.html">PCRE index page</a>.
diff --git a/dist/doc/pcre.3 b/dist/doc/pcre.3
index 4eda404..0f2837e 100644
--- a/dist/doc/pcre.3
+++ b/dist/doc/pcre.3
@@ -1,6 +1,18 @@
-.TH PCRE 3 "08 January 2014" "PCRE 8.35"
+.TH PCRE 3 "10 February 2015" "PCRE 8.37"
.SH NAME
-PCRE - Perl-compatible regular expressions
+PCRE - Perl-compatible regular expressions (original API)
+.SH "PLEASE TAKE NOTE"
+.rs
+.sp
+This document relates to PCRE releases that use the original API,
+with library names libpcre, libpcre16, and libpcre32. January 2015 saw the
+first release of a new API, known as PCRE2, with release numbers starting at
+10.00 and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old
+libraries (now called PCRE1) are still being maintained for bug fixes, but
+there will be no new development. New projects are advised to use the new PCRE2
+libraries.
+.
+.
.SH INTRODUCTION
.rs
.sp
@@ -213,6 +225,6 @@
.rs
.sp
.nf
-Last updated: 08 January 2014
-Copyright (c) 1997-2014 University of Cambridge.
+Last updated: 10 February 2015
+Copyright (c) 1997-2015 University of Cambridge.
.fi
diff --git a/dist/doc/pcre.txt b/dist/doc/pcre.txt
index ce27f4b..bc92e4f 100644
--- a/dist/doc/pcre.txt
+++ b/dist/doc/pcre.txt
@@ -13,7 +13,18 @@
NAME
- PCRE - Perl-compatible regular expressions
+ PCRE - Perl-compatible regular expressions (original API)
+
+PLEASE TAKE NOTE
+
+ This document relates to PCRE releases that use the original API, with
+ library names libpcre, libpcre16, and libpcre32. January 2015 saw the
+ first release of a new API, known as PCRE2, with release numbers start-
+ ing at 10.00 and library names libpcre2-8, libpcre2-16, and
+ libpcre2-32. The old libraries (now called PCRE1) are still being main-
+ tained for bug fixes, but there will be no new development. New
+ projects are advised to use the new PCRE2 libraries.
+
INTRODUCTION
@@ -179,8 +190,8 @@
REVISION
- Last updated: 08 January 2014
- Copyright (c) 1997-2014 University of Cambridge.
+ Last updated: 10 February 2015
+ Copyright (c) 1997-2015 University of Cambridge.
------------------------------------------------------------------------------
diff --git a/dist/install-sh b/dist/install-sh
index 377bb86..0b0fdcb 100755
--- a/dist/install-sh
+++ b/dist/install-sh
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2011-11-20.07; # UTC
+scriptversion=2013-12-25.23; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -41,19 +41,15 @@
# This script is compatible with the BSD install script, but was written
# from scratch.
+tab=' '
nl='
'
-IFS=" "" $nl"
+IFS=" $tab$nl"
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
-# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
+doit_exec=${doit:-exec}
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
@@ -68,17 +64,6 @@
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
-
posix_mkdir=
# Desired mode of installed file.
@@ -97,7 +82,7 @@
dst_arg=
copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
@@ -137,46 +122,57 @@
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
- shift;;
+ shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
+ case $mode in
+ *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
-o) chowncmd="$chownprog $2"
- shift;;
+ shift;;
-s) stripcmd=$stripprog;;
- -t) dst_arg=$2
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
- shift;;
+ -t)
+ is_target_a_directory=always
+ dst_arg=$2
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
- -T) no_target_directory=true;;
+ -T) is_target_a_directory=never;;
--version) echo "$0 $scriptversion"; exit $?;;
- --) shift
- break;;
+ --) shift
+ break;;
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
*) break;;
esac
shift
done
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+ if test -n "$dst_arg"; then
+ echo "$0: target directory not allowed when installing a directory." >&2
+ exit 1
+ fi
+fi
+
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
@@ -208,6 +204,15 @@
fi
if test -z "$dir_arg"; then
+ if test $# -gt 1 || test "$is_target_a_directory" = always; then
+ if test ! -d "$dst_arg"; then
+ echo "$0: $dst_arg: Is not a directory." >&2
+ exit 1
+ fi
+ fi
+fi
+
+if test -z "$dir_arg"; then
do_exit='(exit $ret); exit $ret'
trap "ret=129; $do_exit" 1
trap "ret=130; $do_exit" 2
@@ -223,16 +228,16 @@
*[0-7])
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw='% 200'
+ u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw=,u+rw
+ u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
@@ -269,41 +274,15 @@
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
+ if test "$is_target_a_directory" = never; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstdir_status=0
else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
+ dstdir=`dirname "$dst"`
test -d "$dstdir"
dstdir_status=$?
fi
@@ -314,74 +293,74 @@
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
esac
if
$posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
@@ -391,53 +370,51 @@
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) prefix='/';;
- [-=\(\)!]*) prefix='./';;
- *) prefix='';;
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
esac
- eval "$initialize_posix_glob"
-
oIFS=$IFS
IFS=/
- $posix_glob set -f
+ set -f
set fnord $dstdir
shift
- $posix_glob set +f
+ set +f
IFS=$oIFS
prefixes=
for d
do
- test X"$d" = X && continue
+ test X"$d" = X && continue
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
done
if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
fi
fi
fi
@@ -472,15 +449,12 @@
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+ set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
+ set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
@@ -493,24 +467,24 @@
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
diff --git a/dist/libpcre.pc.in b/dist/libpcre.pc.in
index 1f26b32..0a35da8 100644
--- a/dist/libpcre.pc.in
+++ b/dist/libpcre.pc.in
@@ -9,4 +9,5 @@
Description: PCRE - Perl compatible regular expressions C library with 8 bit character support
Version: @PACKAGE_VERSION@
Libs: -L${libdir} -lpcre
+Libs.private: @PTHREAD_CFLAGS@ @PTHREAD_LIBS@
Cflags: -I${includedir} @PCRE_STATIC_CFLAG@
diff --git a/dist/libpcre16.pc.in b/dist/libpcre16.pc.in
index f589b75..080c9dc 100644
--- a/dist/libpcre16.pc.in
+++ b/dist/libpcre16.pc.in
@@ -9,4 +9,5 @@
Description: PCRE - Perl compatible regular expressions C library with 16 bit character support
Version: @PACKAGE_VERSION@
Libs: -L${libdir} -lpcre16
+Libs.private: @PTHREAD_CFLAGS@ @PTHREAD_LIBS@
Cflags: -I${includedir} @PCRE_STATIC_CFLAG@
diff --git a/dist/libpcre32.pc.in b/dist/libpcre32.pc.in
index 6582105..a3ae0e1 100644
--- a/dist/libpcre32.pc.in
+++ b/dist/libpcre32.pc.in
@@ -9,4 +9,5 @@
Description: PCRE - Perl compatible regular expressions C library with 32 bit character support
Version: @PACKAGE_VERSION@
Libs: -L${libdir} -lpcre32
+Libs.private: @PTHREAD_CFLAGS@ @PTHREAD_LIBS@
Cflags: -I${includedir} @PCRE_STATIC_CFLAG@
diff --git a/dist/ltmain.sh b/dist/ltmain.sh
index 63ae69d..0f0a2da 100644
--- a/dist/ltmain.sh
+++ b/dist/ltmain.sh
@@ -1,9 +1,12 @@
+#! /bin/sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+## by inline-source v2014-01-03.01
-# libtool (GNU libtool) 2.4.2
+# libtool (GNU libtool) 2.4.6
+# Provide generalized library-building support services.
# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 1996-2015 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
@@ -23,166 +26,670 @@
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-# --config show all configuration variables
-# --debug enable verbose shell tracing
-# -n, --dry-run display commands without modifying any files
-# --features display basic configuration information and exit
-# --mode=MODE use operation mode MODE
-# --preserve-dup-deps don't remove duplicate dependency libraries
-# --quiet, --silent don't print informational messages
-# --no-quiet, --no-silent
-# print informational messages (default)
-# --no-warn don't display warning messages
-# --tag=TAG use configuration variables from tag TAG
-# -v, --verbose print more informational messages than default
-# --no-verbose don't print the extra informational messages
-# --version print version information
-# -h, --help, --help-all print short, long, or detailed help message
-#
-# MODE must be one of the following:
-#
-# clean remove files from the build directory
-# compile compile a source file into a libtool object
-# execute automatically set library path, then run a program
-# finish complete the installation of libtool libraries
-# install install libraries or executables
-# link create a library or an executable
-# uninstall remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE. When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-# host-triplet: $host
-# shell: $SHELL
-# compiler: $LTCC
-# compiler flags: $LTCFLAGS
-# linker: $LD (gnu? $with_gnu_ld)
-# $progname: (GNU libtool) 2.4.2
-# automake: $automake_version
-# autoconf: $autoconf_version
-#
-# Report bugs to <bug-libtool@gnu.org>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
PROGRAM=libtool
PACKAGE=libtool
-VERSION=2.4.2
-TIMESTAMP=""
-package_revision=1.3337
+VERSION=2.4.6
+package_revision=2.4.6
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2015-01-20.17; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# Copyright (C) 2004-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# As a special exception to the GNU General Public License, if you distribute
+# this file as part of a program or library that is built using GNU Libtool,
+# you may include this file under the same distribution terms that you use
+# for the rest of that program.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
- eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-
-# NLS nuisances: We save the old values to restore during execute mode.
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
- eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- $lt_var=C
- export $lt_var
- lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
- lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ eval "if test set = \"\${$_G_var+set}\"; then
+ save_$_G_var=\$$_G_var
+ $_G_var=C
+ export $_G_var
+ _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+ _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
fi"
done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
-$lt_unset CDPATH
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp $nl"
+
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
+
+
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+}
+
+
+# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+ _G_progs_list=$1
+ _G_check_func=$2
+ _G_PATH=${3-"$PATH"}
+
+ _G_path_prog_max=0
+ _G_path_prog_found=false
+ _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+ for _G_dir in $_G_PATH; do
+ IFS=$_G_save_IFS
+ test -z "$_G_dir" && _G_dir=.
+ for _G_prog_name in $_G_progs_list; do
+ for _exeext in '' .EXE; do
+ _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+ func_executable_p "$_G_path_prog" || continue
+ case `"$_G_path_prog" --version 2>&1` in
+ *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+ *) $_G_check_func $_G_path_prog
+ func_path_progs_result=$func_check_prog_result
+ ;;
+ esac
+ $_G_path_prog_found && break 3
+ done
+ done
+ done
+ IFS=$_G_save_IFS
+ test -z "$func_path_progs_result" && {
+ echo "no acceptable sed could be found in \$PATH" >&2
+ exit 1
+ }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+ _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for _G_i in 1 2 3 4 5 6 7; do
+ _G_sed_script=$_G_sed_script$nl$_G_sed_script
+ done
+ echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+ _G_sed_script=
+
+ func_check_prog_sed ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo '' >> conftest.nl
+ "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
+ rm -f conftest.sed
+ SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+ func_check_prog_grep ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ _G_path_prog_max=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo 'GREP' >> conftest.nl
+ "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
+ GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables. These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
+
+: ${CP="cp -f"}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+
+
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
+
+sed_dirname='s|/[^/]*$||'
+sed_basename='s|^.*/||'
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
+
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
+
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same. If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion. Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+ s/$_G_bs4/&\\
+/g
+ s/^$_G_bs2$_G_dollar/$_G_bs&/
+ s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+ s/\n//g"
+
+
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
+
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
+
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
+
+# By convention, finish your script with:
+#
+# exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
# is ksh but when the shell is invoked as "sh" and the current value of
# the _XPG environment variable is not equal to 1 (one), the special
# positional parameter $0, within a function call, is the name of the
# function.
-progpath="$0"
+progpath=$0
+
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
+
+# Make sure we have an absolute progpath for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
+ progdir=`cd "$progdir" && pwd`
+ progpath=$progdir/$progname
+ ;;
+ *)
+ _G_IFS=$IFS
+ IFS=${PATH_SEPARATOR-:}
+ for progdir in $PATH; do
+ IFS=$_G_IFS
+ test -x "$progdir/$progname" && break
+ done
+ IFS=$_G_IFS
+ test -n "$progdir" || progdir=`pwd`
+ progpath=$progdir/$progname
+ ;;
+esac
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
-: ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
-: ${MAKE="make"}
-: ${MKDIR="mkdir"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+opt_dry_run=false
+opt_quiet=false
+opt_verbose=false
-exit_status=$EXIT_SUCCESS
+# Categories 'all' and 'none' are always available. Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" $lt_nl"
+# By default, display warnings according to 'opt_warning_types'. Set
+# 'warning_func' to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
-# func_dirname file append nondir_replacement
+
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
+
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
+
+
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
+{
+ $debug_cmd
+
+ test -t 1 && {
+ # COLORTERM and USE_ANSI_COLORS environment variables take
+ # precedence, because most terminfo databases neglect to describe
+ # whether color sequences are supported.
+ test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+ if test 1 = "$USE_ANSI_COLORS"; then
+ # Standard ANSI escape sequences
+ tc_reset='[0m'
+ tc_bold='[1m'; tc_standout='[7m'
+ tc_red='[31m'; tc_green='[32m'
+ tc_blue='[34m'; tc_cyan='[36m'
+ else
+ # Otherwise trust the terminfo database after all.
+ test -n "`tput sgr0 2>/dev/null`" && {
+ tc_reset=`tput sgr0`
+ test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+ tc_standout=$tc_bold
+ test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+ test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+ test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+ test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+ test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+ }
+ fi
+ }
+
+ require_term_colors=:
+}
+
+
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
+
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
+
+
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
+
+ # We should try to minimise forks, especially on Windows where they are
+ # unreasonably slow, so skip the feature probes when bash or zsh are
+ # being used:
+ if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+ : ${_G_HAVE_ARITH_OP="yes"}
+ : ${_G_HAVE_XSI_OPS="yes"}
+ # The += operator was introduced in bash 3.1
+ case $BASH_VERSION in
+ [12].* | 3.0 | 3.0*) ;;
+ *)
+ : ${_G_HAVE_PLUSEQ_OP="yes"}
+ ;;
+ esac
+ fi
+
+ # _G_HAVE_PLUSEQ_OP
+ # Can be empty, in which case the shell is probed, "yes" if += is
+ # useable or anything else if it does not work.
+ test -z "$_G_HAVE_PLUSEQ_OP" \
+ && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+ && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_append ()
+ {
+ $debug_cmd
+
+ eval "$1+=\$2"
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_append ()
+ {
+ $debug_cmd
+
+ eval "$1=\$$1\$2"
+ }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+ eval 'func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_for_eval "$2"
+ eval "$1+=\\ \$func_quote_for_eval_result"
+ }'
+else
+ func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_for_eval "$2"
+ eval "$1=\$$1\\ \$func_quote_for_eval_result"
+ }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE. For example:
+#
+# func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
+{
+ $debug_cmd
+
+ eval _G_current_value='`$ECHO $'$1'`'
+ _G_delim=`expr "$2" : '\(.\)'`
+
+ case $_G_delim$_G_current_value$_G_delim in
+ *"$2$_G_delim"*) ;;
+ *) func_append "$@" ;;
+ esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+ test -z "$_G_HAVE_ARITH_OP" \
+ && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+ && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+ eval 'func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=$(( $* ))
+ }'
+else
+ func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=`expr "$@"`
+ }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ # If this shell supports suffix pattern removal, then use it to avoid
+ # forking. Hide the definitions single quotes in case the shell chokes
+ # on unsupported syntax...
+ _b='func_basename_result=${1##*/}'
+ _d='case $1 in
+ */*) func_dirname_result=${1%/*}$2 ;;
+ * ) func_dirname_result=$3 ;;
+ esac'
+
+else
+ # ...otherwise fall back to using sed.
+ _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+ _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"`
+ if test "X$func_dirname_result" = "X$1"; then
+ func_dirname_result=$3
+ else
+ func_append func_dirname_result "$2"
+ fi'
+fi
+
+eval 'func_basename ()
+{
+ $debug_cmd
+
+ '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
# Compute the dirname of FILE. If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
+eval 'func_dirname ()
{
- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-} # func_dirname may be replaced by extended shell implementation
+ $debug_cmd
+
+ '"$_d"'
+}'
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
-
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
# call:
# dirname: Compute the dirname of FILE. If nonempty,
# add APPEND to the result, otherwise set result
@@ -190,263 +697,327 @@
# value returned in "$func_dirname_result"
# basename: Compute filename of FILE.
# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
+ $debug_cmd
+
+ '"$_b"'
+ '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+ $debug_cmd
+
+ _G_message=$*
+
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
+
+
+# func_echo_all ARG...
+# --------------------
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ _G_infix=$1; shift
+ _G_indent=$_G_infix
+ _G_prefix="$progname: $_G_infix: "
+ _G_message=$*
+
+ # Strip color escape sequences before counting printable length
+ for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
+ do
+ test -n "$_G_tc" && {
+ _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+ _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+ }
+ done
+ _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes
+
+ func_echo_infix_1_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_infix_1_IFS
+ $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+ _G_prefix=$_G_indent
+ done
+ IFS=$func_echo_infix_1_IFS
+}
+
+
+# func_error ARG...
+# -----------------
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2
+}
+
+
+# func_fatal_error ARG...
+# -----------------------
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ $debug_cmd
+
+ func_error "$*"
+ exit $EXIT_FAILURE
+}
+
+
+# func_grep EXPRESSION FILENAME
+# -----------------------------
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $debug_cmd
+
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+ test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=${#1}
+ }'
+else
+ func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+ }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ $debug_cmd
+
+ _G_directory_path=$1
+ _G_dir_list=
+
+ if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
+
+ # Protect directory names starting with '-'
+ case $_G_directory_path in
+ -*) _G_directory_path=./$_G_directory_path ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$_G_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ _G_dir_list=$_G_directory_path:$_G_dir_list
+
+ # If the last portion added has no slash in it, the list is done
+ case $_G_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
+ done
+ _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
+
+ func_mkdir_p_IFS=$IFS; IFS=:
+ for _G_dir in $_G_dir_list; do
+ IFS=$func_mkdir_p_IFS
+ # mkdir can fail with a 'File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$_G_dir" 2>/dev/null || :
+ done
+ IFS=$func_mkdir_p_IFS
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$_G_directory_path" || \
+ func_fatal_error "Failed to create '$1'"
fi
- func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
+}
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
+# func_mktempdir [BASENAME]
+# -------------------------
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, BASENAME is the basename for that directory.
+func_mktempdir ()
{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
- esac
-} # func_stripname may be replaced by extended shell implementation
+ $debug_cmd
+ _G_template=${TMPDIR-/tmp}/${1-$progname}
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
- s@/\./@/@g
- t dotsl
- s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
+ if test : = "$opt_dry_run"; then
+ # Return a directory name, but don't create it in dry-run mode
+ _G_tmpdir=$_G_template-$$
+ else
+
+ # If mktemp works, use that first and foremost
+ _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$_G_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ _G_tmpdir=$_G_template-${RANDOM-0}$$
+
+ func_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$_G_tmpdir"
+ umask $func_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$_G_tmpdir" || \
+ func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
+ fi
+
+ $ECHO "$_G_tmpdir"
+}
+
# func_normal_abspath PATH
+# ------------------------
# Remove doubled-up and trailing slashes, "." path components,
# and cancel out any ".." path components in PATH after making
# it an absolute path.
-# value returned in "$func_normal_abspath_result"
func_normal_abspath ()
{
- # Start from root dir and reassemble the path.
- func_normal_abspath_result=
- func_normal_abspath_tpath=$1
- func_normal_abspath_altnamespace=
- case $func_normal_abspath_tpath in
- "")
- # Empty path, that just means $cwd.
- func_stripname '' '/' "`pwd`"
- func_normal_abspath_result=$func_stripname_result
- return
- ;;
- # The next three entries are used to spot a run of precisely
- # two leading slashes without using negated character classes;
- # we take advantage of case's first-match behaviour.
- ///*)
- # Unusual form of absolute path, do nothing.
- ;;
- //*)
- # Not necessarily an ordinary path; POSIX reserves leading '//'
- # and for example Cygwin uses it to access remote file shares
- # over CIFS/SMB, so we conserve a leading double slash if found.
- func_normal_abspath_altnamespace=/
- ;;
- /*)
- # Absolute path, do nothing.
- ;;
- *)
- # Relative path, prepend $cwd.
- func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
- ;;
- esac
- # Cancel out all the simple stuff to save iterations. We also want
- # the path to end with a slash for ease of parsing, so make sure
- # there is one (and only one) here.
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
- while :; do
- # Processed it all yet?
- if test "$func_normal_abspath_tpath" = / ; then
- # If we ascended to the root using ".." the result may be empty now.
- if test -z "$func_normal_abspath_result" ; then
- func_normal_abspath_result=/
- fi
- break
- fi
- func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcar"`
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcdr"`
- # Figure out what to do with it
- case $func_normal_abspath_tcomponent in
+ $debug_cmd
+
+ # These SED scripts presuppose an absolute path with a trailing slash.
+ _G_pathcar='s|^/\([^/]*\).*$|\1|'
+ _G_pathcdr='s|^/[^/]*||'
+ _G_removedotparts=':dotsl
+ s|/\./|/|g
+ t dotsl
+ s|/\.$|/|'
+ _G_collapseslashes='s|/\{1,\}|/|g'
+ _G_finalslash='s|/*$|/|'
+
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
"")
- # Trailing empty path component, ignore it.
- ;;
- ..)
- # Parent dir; strip last assembled component from result.
- func_dirname "$func_normal_abspath_result"
- func_normal_abspath_result=$func_dirname_result
- ;;
- *)
- # Actual path component, append it.
- func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
- ;;
- esac
- done
- # Restore leading double-slash if one was found on entry.
- func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
-
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-# value returned in "$func_relative_path_result"
-func_relative_path ()
-{
- func_relative_path_result=
- func_normal_abspath "$1"
- func_relative_path_tlibdir=$func_normal_abspath_result
- func_normal_abspath "$2"
- func_relative_path_tbindir=$func_normal_abspath_result
-
- # Ascend the tree starting from libdir
- while :; do
- # check if we have found a prefix of bindir
- case $func_relative_path_tbindir in
- $func_relative_path_tlibdir)
- # found an exact match
- func_relative_path_tcancelled=
- break
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
;;
- $func_relative_path_tlibdir*)
- # found a matching prefix
- func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
- func_relative_path_tcancelled=$func_stripname_result
- if test -z "$func_relative_path_result"; then
- func_relative_path_result=.
- fi
- break
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
;;
*)
- func_dirname $func_relative_path_tlibdir
- func_relative_path_tlibdir=${func_dirname_result}
- if test "x$func_relative_path_tlibdir" = x ; then
- # Have to descend all the way to the root!
- func_relative_path_result=../$func_relative_path_result
- func_relative_path_tcancelled=$func_relative_path_tbindir
- break
- fi
- func_relative_path_result=../$func_relative_path_result
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
;;
esac
- done
- # Now calculate path; take care to avoid doubling-up slashes.
- func_stripname '' '/' "$func_relative_path_result"
- func_relative_path_result=$func_stripname_result
- func_stripname '/' '/' "$func_relative_path_tcancelled"
- if test "x$func_stripname_result" != x ; then
- func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
- fi
-
- # Normalisation. If bindir is libdir, return empty string,
- # else relative path ending with a slash; either way, target
- # file name can be directly appended.
- if test ! -z "$func_relative_path_result"; then
- func_stripname './' '' "$func_relative_path_result/"
- func_relative_path_result=$func_stripname_result
- fi
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test / = "$func_normal_abspath_tpath"; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result"; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
}
-# The name of this program:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
-# Make sure we have an absolute path for reexecution:
-case $progpath in
- [\\/]*|[A-Za-z]:\\*) ;;
- *[\\/]*)
- progdir=$func_dirname_result
- progdir=`cd "$progdir" && pwd`
- progpath="$progdir/$progname"
- ;;
- *)
- save_IFS="$IFS"
- IFS=${PATH_SEPARATOR-:}
- for progdir in $PATH; do
- IFS="$save_IFS"
- test -x "$progdir/$progname" && break
- done
- IFS="$save_IFS"
- test -n "$progdir" || progdir=`pwd`
- progpath="$progdir/$progname"
- ;;
-esac
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
-
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes. A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
- s/$bs4/&\\
-/g
- s/^$bs2$dollar/$bs&/
- s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
- s/\n//g"
-
-# Standard options:
-opt_dry_run=false
-opt_help=false
-opt_quiet=false
-opt_verbose=false
-opt_warning=:
-
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
{
- $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
-}
+ $debug_cmd
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
- $opt_verbose && func_echo ${1+"$@"}
+ $opt_quiet || func_echo ${1+"$@"}
# A bug in bash halts the script if the last line of a function
# fails when set -e is in force, so we need another command to
@@ -454,450 +1025,1113 @@
:
}
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
- $ECHO "$*"
-}
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
{
- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
-}
+ $debug_cmd
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
- # bash bug again:
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=$func_dirname_result
+ if test -z "$func_relative_path_tlibdir"; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test -n "$func_stripname_result"; then
+ func_append func_relative_path_result "/$func_stripname_result"
+ fi
+
+ # Normalisation. If bindir is libdir, return '.' else relative path.
+ if test -n "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ fi
+
+ test -n "$func_relative_path_result" || func_relative_path_result=.
+
:
}
-# func_fatal_error arg...
-# Echo program name prefixed message to standard error, and exit.
-func_fatal_error ()
-{
- func_error ${1+"$@"}
- exit $EXIT_FAILURE
-}
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
- func_error ${1+"$@"}
- func_fatal_error "$help"
-}
-help="Try \`$progname --help' for more information." ## default
-
-
-# func_grep expression filename
-# Check whether EXPRESSION matches any line of FILENAME, without output.
-func_grep ()
-{
- $GREP "$1" "$2" >/dev/null 2>&1
-}
-
-
-# func_mkdir_p directory-path
-# Make sure the entire path to DIRECTORY-PATH is available.
-func_mkdir_p ()
-{
- my_directory_path="$1"
- my_dir_list=
-
- if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
-
- # Protect directory names starting with `-'
- case $my_directory_path in
- -*) my_directory_path="./$my_directory_path" ;;
- esac
-
- # While some portion of DIR does not yet exist...
- while test ! -d "$my_directory_path"; do
- # ...make a list in topmost first order. Use a colon delimited
- # list incase some portion of path contains whitespace.
- my_dir_list="$my_directory_path:$my_dir_list"
-
- # If the last portion added has no slash in it, the list is done
- case $my_directory_path in */*) ;; *) break ;; esac
-
- # ...otherwise throw away the child directory and loop
- my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
- done
- my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
-
- save_mkdir_p_IFS="$IFS"; IFS=':'
- for my_dir in $my_dir_list; do
- IFS="$save_mkdir_p_IFS"
- # mkdir can fail with a `File exist' error if two processes
- # try to create one of the directories concurrently. Don't
- # stop in that case!
- $MKDIR "$my_dir" 2>/dev/null || :
- done
- IFS="$save_mkdir_p_IFS"
-
- # Bail out if we (or some other process) failed to create a directory.
- test -d "$my_directory_path" || \
- func_fatal_error "Failed to create \`$1'"
- fi
-}
-
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible. If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
- my_template="${TMPDIR-/tmp}/${1-$progname}"
-
- if test "$opt_dry_run" = ":"; then
- # Return a directory name, but don't create it in dry-run mode
- my_tmpdir="${my_template}-$$"
- else
-
- # If mktemp works, use that first and foremost
- my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
- if test ! -d "$my_tmpdir"; then
- # Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
-
- save_mktempdir_umask=`umask`
- umask 0077
- $MKDIR "$my_tmpdir"
- umask $save_mktempdir_umask
- fi
-
- # If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || \
- func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
- fi
-
- $ECHO "$my_tmpdir"
-}
-
-
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
+# func_quote_for_eval ARG...
+# --------------------------
+# Aesthetically quote ARGs to be evaled later.
+# This function returns two values:
+# i) func_quote_for_eval_result
+# double-quoted, suitable for a subsequent eval
+# ii) func_quote_for_eval_unquoted_result
+# has all characters that are still active within double
+# quotes backslashified.
func_quote_for_eval ()
{
- case $1 in
- *[\\\`\"\$]*)
- func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
- *)
- func_quote_for_eval_unquoted_result="$1" ;;
- esac
+ $debug_cmd
- case $func_quote_for_eval_unquoted_result in
- # Double-quote args containing shell metacharacters to delay
- # word splitting, command substitution and and variable
- # expansion for a subsequent eval.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
- ;;
- *)
- func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
- esac
+ func_quote_for_eval_unquoted_result=
+ func_quote_for_eval_result=
+ while test 0 -lt $#; do
+ case $1 in
+ *[\\\`\"\$]*)
+ _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
+ *)
+ _G_unquoted_arg=$1 ;;
+ esac
+ if test -n "$func_quote_for_eval_unquoted_result"; then
+ func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
+ else
+ func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
+ fi
+
+ case $_G_unquoted_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and variable expansion
+ # for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ _G_quoted_arg=\"$_G_unquoted_arg\"
+ ;;
+ *)
+ _G_quoted_arg=$_G_unquoted_arg
+ ;;
+ esac
+
+ if test -n "$func_quote_for_eval_result"; then
+ func_append func_quote_for_eval_result " $_G_quoted_arg"
+ else
+ func_append func_quote_for_eval_result "$_G_quoted_arg"
+ fi
+ shift
+ done
}
-# func_quote_for_expand arg
+# func_quote_for_expand ARG
+# -------------------------
# Aesthetically quote ARG to be evaled later; same as above,
# but do not quote variable references.
func_quote_for_expand ()
{
+ $debug_cmd
+
case $1 in
*[\\\`\"]*)
- my_arg=`$ECHO "$1" | $SED \
- -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+ _G_arg=`$ECHO "$1" | $SED \
+ -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
*)
- my_arg="$1" ;;
+ _G_arg=$1 ;;
esac
- case $my_arg in
+ case $_G_arg in
# Double-quote args containing shell metacharacters to delay
# word splitting and command substitution for a subsequent eval.
# Many Bourne shells cannot handle close brackets correctly
# in scan sets, so we specify it separately.
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- my_arg="\"$my_arg\""
+ _G_arg=\"$_G_arg\"
;;
esac
- func_quote_for_expand_result="$my_arg"
+ func_quote_for_expand_result=$_G_arg
}
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_stripname ()
+ {
+ $debug_cmd
+
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary variable first.
+ func_stripname_result=$3
+ func_stripname_result=${func_stripname_result#"$1"}
+ func_stripname_result=${func_stripname_result%"$2"}
+ }'
+else
+ func_stripname ()
+ {
+ $debug_cmd
+
+ case $2 in
+ .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
+ *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
+ esac
+ }
+fi
+
+
+# func_show_eval CMD [FAIL_EXP]
+# -----------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
# is given, then evaluate it.
func_show_eval ()
{
- my_cmd="$1"
- my_fail_exp="${2-:}"
+ $debug_cmd
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
- if ${opt_dry_run-false}; then :; else
- eval "$my_cmd"
- my_status=$?
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
+ func_quote_for_expand "$_G_cmd"
+ eval "func_notquiet $func_quote_for_expand_result"
+
+ $opt_dry_run || {
+ eval "$_G_cmd"
+ _G_status=$?
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
fi
- fi
+ }
}
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# func_show_eval_locale CMD [FAIL_EXP]
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
# is given, then evaluate it. Use the saved locale for evaluation.
func_show_eval_locale ()
{
- my_cmd="$1"
- my_fail_exp="${2-:}"
+ $debug_cmd
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
+
+ $opt_quiet || {
+ func_quote_for_expand "$_G_cmd"
eval "func_echo $func_quote_for_expand_result"
}
- if ${opt_dry_run-false}; then :; else
- eval "$lt_user_locale
- $my_cmd"
- my_status=$?
- eval "$lt_safe_locale"
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
+ $opt_dry_run || {
+ eval "$_G_user_locale
+ $_G_cmd"
+ _G_status=$?
+ eval "$_G_safe_locale"
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
fi
- fi
+ }
}
+
# func_tr_sh
+# ----------
# Turn $1 into a string suitable for a shell variable name.
# Result is stored in $func_tr_sh_result. All characters
# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
# if $1 begins with a digit, a '_' is prepended as well.
func_tr_sh ()
{
- case $1 in
- [0-9]* | *[!a-zA-Z0-9_]*)
- func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
- ;;
- * )
- func_tr_sh_result=$1
- ;;
- esac
+ $debug_cmd
+
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
}
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
{
- $opt_debug
+ $debug_cmd
- $SED -n '/(C)/!b go
- :more
- /\./!{
- N
- s/\n# / /
- b more
- }
- :go
- /^# '$PROGRAM' (GNU /,/# warranty; / {
- s/^# //
- s/^# *$//
- s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
- p
- }' < "$progpath"
- exit $?
+ $opt_verbose && func_echo "$*"
+
+ :
}
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
{
- $opt_debug
+ $debug_cmd
- $SED -n '/^# Usage:/,/^# *.*--help/ {
- s/^# //
- s/^# *$//
- s/\$progname/'$progname'/
- p
- }' < "$progpath"
- echo
- $ECHO "run \`$progname --help | more' for full usage"
- exit $?
+ $require_term_colors
+
+ func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
}
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+ $debug_cmd
+
+ # CATEGORY must be in the warning_categories list!
+ case " $warning_categories " in
+ *" $1 "*) ;;
+ *) func_internal_error "invalid warning category '$1'" ;;
+ esac
+
+ _G_category=$1
+ shift
+
+ case " $opt_warning_types " in
+ *" $_G_category "*) $warning_func ${1+"$@"} ;;
+ esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+ $debug_cmd
+
+ printf '%s\n%s\n' "$1" "$2" \
+ | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false. Use it like this:
+#
+# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+ $debug_cmd
+
+ test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# Set a version string for this script.
+scriptversion=2014-01-07.03; # UTC
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# Copyright (C) 2010-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+# #!/bin/sh
+# . relative/path/to/funclib.sh
+# . relative/path/to/options-parser
+# scriptversion=1.0
+# func_options ${1+"$@"}
+# eval set dummy "$func_options_result"; shift
+# ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# warranty; '.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath [OPTION]...'
+
+# Short help message in response to '-h' and '--help'. Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+ --debug enable verbose shell tracing
+ -W, --warnings=CATEGORY
+ report the warnings falling in CATEGORY [all]
+ -v, --verbose verbosely report processing
+ --version print version information and exit
+ -h, --help print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+ 'all' show all warnings
+ 'none' turn off all the warnings
+ 'error' warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# to the main code. A hook is just a named list of of function, that can
+# be run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+ $debug_cmd
+
+ func_append hookable_fns " $1"
+}
+
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+ $debug_cmd
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not accept hook functions." ;;
+ esac
+
+ eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
+func_remove_hook ()
+{
+ $debug_cmd
+
+ eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_run_hooks FUNC_NAME [ARG]...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It is assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+ $debug_cmd
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not support hook funcions.n" ;;
+ esac
+
+ eval _G_hook_fns=\$$1_hooks; shift
+
+ for _G_hook in $_G_hook_fns; do
+ eval $_G_hook '"$@"'
+
+ # store returned options list back into positional
+ # parameters for next 'cmd' execution.
+ eval _G_hook_result=\$${_G_hook}_result
+ eval set dummy "$_G_hook_result"; shift
+ done
+
+ func_quote_for_eval ${1+"$@"}
+ func_run_hooks_result=$func_quote_for_eval_result
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list in your hook function, remove any
+# options that you action, and then pass back the remaining unprocessed
+# options in '<hooked_function_name>_result', escaped suitably for
+# 'eval'. Like this:
+#
+# my_options_prep ()
+# {
+# $debug_cmd
+#
+# # Extend the existing usage message.
+# usage_message=$usage_message'
+# -s, --silent don'\''t print informational messages
+# '
+#
+# func_quote_for_eval ${1+"$@"}
+# my_options_prep_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_options_prep my_options_prep
+#
+#
+# my_silent_option ()
+# {
+# $debug_cmd
+#
+# # Note that for efficiency, we parse as many options as we can
+# # recognise in a loop before passing the remainder back to the
+# # caller on the first unrecognised argument we encounter.
+# while test $# -gt 0; do
+# opt=$1; shift
+# case $opt in
+# --silent|-s) opt_silent=: ;;
+# # Separate non-argument short options:
+# -s*) func_split_short_opt "$_G_opt"
+# set dummy "$func_split_short_opt_name" \
+# "-$func_split_short_opt_arg" ${1+"$@"}
+# shift
+# ;;
+# *) set dummy "$_G_opt" "$*"; shift; break ;;
+# esac
+# done
+#
+# func_quote_for_eval ${1+"$@"}
+# my_silent_option_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_parse_options my_silent_option
+#
+#
+# my_option_validation ()
+# {
+# $debug_cmd
+#
+# $opt_silent && $opt_verbose && func_fatal_help "\
+# '--silent' and '--verbose' options are mutually exclusive."
+#
+# func_quote_for_eval ${1+"$@"}
+# my_option_validation_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_validate_options my_option_validation
+#
+# You'll alse need to manually amend $usage_message to reflect the extra
+# options you parse. It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options [ARG]...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+ $debug_cmd
+
+ func_options_prep ${1+"$@"}
+ eval func_parse_options \
+ ${func_options_prep_result+"$func_options_prep_result"}
+ eval func_validate_options \
+ ${func_parse_options_result+"$func_parse_options_result"}
+
+ eval func_run_hooks func_options \
+ ${func_validate_options_result+"$func_validate_options_result"}
+
+ # save modified positional parameters for caller
+ func_options_result=$func_run_hooks_result
+}
+
+
+# func_options_prep [ARG]...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters. If a hook function modifies that list, and
+# needs to propogate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before
+# returning.
+func_hookable func_options_prep
+func_options_prep ()
+{
+ $debug_cmd
+
+ # Option defaults:
+ opt_verbose=false
+ opt_warning_types=
+
+ func_run_hooks func_options_prep ${1+"$@"}
+
+ # save modified positional parameters for caller
+ func_options_prep_result=$func_run_hooks_result
+}
+
+
+# func_parse_options [ARG]...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
+{
+ $debug_cmd
+
+ func_parse_options_result=
+
+ # this just eases exit handling
+ while test $# -gt 0; do
+ # Defer to hook functions for initial option parsing, so they
+ # get priority in the event of reusing an option name.
+ func_run_hooks func_parse_options ${1+"$@"}
+
+ # Adjust func_parse_options positional parameters to match
+ eval set dummy "$func_run_hooks_result"; shift
+
+ # Break out of the loop if we already parsed every option.
+ test $# -gt 0 || break
+
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --debug|-x) debug_cmd='set -x'
+ func_echo "enabling shell trace mode"
+ $debug_cmd
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ set dummy --warnings none ${1+"$@"}
+ shift
+ ;;
+
+ --warnings|--warning|-W)
+ test $# = 0 && func_missing_arg $_G_opt && break
+ case " $warning_categories $1" in
+ *" $1 "*)
+ # trailing space prevents matching last $1 above
+ func_append_uniq opt_warning_types " $1"
+ ;;
+ *all)
+ opt_warning_types=$warning_categories
+ ;;
+ *none)
+ opt_warning_types=none
+ warning_func=:
+ ;;
+ *error)
+ opt_warning_types=$warning_categories
+ warning_func=func_fatal_error
+ ;;
+ *)
+ func_fatal_error \
+ "unsupported warning category: '$1'"
+ ;;
+ esac
+ shift
+ ;;
+
+ --verbose|-v) opt_verbose=: ;;
+ --version) func_version ;;
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+
+ # Separate optargs to long options (plugins may need this):
+ --*=*) func_split_equals "$_G_opt"
+ set dummy "$func_split_equals_lhs" \
+ "$func_split_equals_rhs" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate optargs to short options:
+ -W*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-v*|-x*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) break ;;
+ -*) func_fatal_help "unrecognised option: '$_G_opt'" ;;
+ *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+ # save modified positional parameters for caller
+ func_quote_for_eval ${1+"$@"}
+ func_parse_options_result=$func_quote_for_eval_result
+}
+
+
+# func_validate_options [ARG]...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
+{
+ $debug_cmd
+
+ # Display all warnings if -W was not given.
+ test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
+
+ func_run_hooks func_validate_options ${1+"$@"}
+
+ # Bail if the options were screwed!
+ $exit_cmd $EXIT_FAILURE
+
+ # save modified positional parameters for caller
+ func_validate_options_result=$func_run_hooks_result
+}
+
+
+
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
+
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ $debug_cmd
+
+ eval \$ECHO \""Usage: $usage"\"
+ eval \$ECHO \""$fatal_help"\"
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
func_help ()
{
- $opt_debug
+ $debug_cmd
- $SED -n '/^# Usage:/,/# Report bugs to/ {
- :print
- s/^# //
- s/^# *$//
- s*\$progname*'$progname'*
- s*\$host*'"$host"'*
- s*\$SHELL*'"$SHELL"'*
- s*\$LTCC*'"$LTCC"'*
- s*\$LTCFLAGS*'"$LTCFLAGS"'*
- s*\$LD*'"$LD"'*
- s/\$with_gnu_ld/'"$with_gnu_ld"'/
- s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
- s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
- p
- d
- }
- /^# .* home page:/b print
- /^# General help using/b print
- ' < "$progpath"
- ret=$?
- if test -z "$1"; then
- exit $ret
- fi
+ func_usage_message
+ $ECHO "$long_help_message"
+ exit 0
}
-# func_missing_arg argname
+
+# func_missing_arg ARGNAME
+# ------------------------
# Echo program name prefixed message to standard error and set global
# exit_cmd.
func_missing_arg ()
{
- $opt_debug
+ $debug_cmd
- func_error "missing argument for $1."
+ func_error "Missing argument for '$1'."
exit_cmd=exit
}
-# func_split_short_opt shortopt
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
+# splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=${1%%=*}
+ func_split_equals_rhs=${1#*=}
+ test "x$func_split_equals_lhs" = "x$1" \
+ && func_split_equals_rhs=
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
+ func_split_equals_rhs=
+ test "x$func_split_equals_lhs" = "x$1" \
+ || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
+ }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
# Set func_split_short_opt_name and func_split_short_opt_arg shell
# variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
+ func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
+ }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
{
- my_sed_short_opt='1s/^\(..\).*$/\1/;q'
- my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+ $debug_cmd
- func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
- func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
+ func_usage_message
+ $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+ exit 0
+}
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
{
- my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
- my_sed_long_arg='1s/^--[^=]*=//'
+ $debug_cmd
- func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
- func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
-
-exit_cmd=:
+ eval \$ECHO \""Usage: $usage"\"
+ echo
+ $SED -n 's|^# ||
+ /^Written by/{
+ x;p;x
+ }
+ h
+ /^Written by/q' < "$progpath"
+ echo
+ eval \$ECHO \""$usage_message"\"
+}
-
-
-
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
-
-# Global variables.
-nonopt=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+func_version ()
{
- eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
+ $debug_cmd
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
+ printf '%s\n' "$progname $scriptversion"
+ $SED -n '
+ /(C)/!b go
+ :more
+ /\./!{
+ N
+ s|\n# | |
+ b more
+ }
+ :go
+ /^# Written by /,/# warranty; / {
+ s|^# ||
+ s|^# *$||
+ s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
+ p
+ }
+ /^# Written by / {
+ s|^# ||
+ p
+ }
+ /^warranty; /q' < "$progpath"
+
+ exit $?
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.6'
+
+
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
{
- func_quote_for_eval "${2}"
- eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
+ $debug_cmd
+
+ _G_message=$*
+
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
-# func_arith arithmetic-term...
-func_arith ()
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
{
- func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
+ $debug_cmd
+
+ $warning_func ${1+"$@"}
+}
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath [OPTION]... [MODE-ARG]...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+ --config show all configuration variables
+ --debug enable verbose shell tracing
+ -n, --dry-run display commands without modifying any files
+ --features display basic configuration information and exit
+ --mode=MODE use operation mode MODE
+ --no-warnings equivalent to '-Wnone'
+ --preserve-dup-deps don't remove duplicate dependency libraries
+ --quiet, --silent don't print informational messages
+ --tag=TAG use configuration variables from tag TAG
+ -v, --verbose print more informational messages than default
+ --version print version information
+ -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all]
+ -h, --help, --help-all print short, long, or detailed help message
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
{
- func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
+ $debug_cmd
+
+ func_usage_message
+ $ECHO "$long_help_message
+
+MODE must be one of the following:
+
+ clean remove files from the build directory
+ compile compile a source file into a libtool object
+ execute automatically set library path, then run a program
+ finish complete the installation of libtool libraries
+ install install libraries or executables
+ link create a library or an executable
+ uninstall remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE. When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+ host-triplet: $host
+ shell: $SHELL
+ compiler: $LTCC
+ compiler flags: $LTCFLAGS
+ linker: $LD (gnu? $with_gnu_ld)
+ version: $progname (GNU libtool) 2.4.6
+ automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+ autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+ exit 0
+}
-# func_lo2o object
-func_lo2o ()
-{
- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_lo2o ()
+ {
+ case $1 in
+ *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+ * ) func_lo2o_result=$1 ;;
+ esac
+ }'
+
+ # func_xform LIBOBJ-OR-SOURCE
+ # ---------------------------
+ # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+ # suffix to a '.lo' libtool-object suffix.
+ eval 'func_xform ()
+ {
+ func_xform_result=${1%.*}.lo
+ }'
+else
+ # ...otherwise fall back to using sed.
+ func_lo2o ()
+ {
+ func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+ }
+
+ func_xform ()
+ {
+ func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
+ }
+fi
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
-
-
-# func_fatal_configuration arg...
+# func_fatal_configuration ARG...
+# -------------------------------
# Echo program name prefixed message to standard error, followed by
# a configuration failure hint, and exit.
func_fatal_configuration ()
{
- func_error ${1+"$@"}
- func_error "See the $PACKAGE documentation for more information."
- func_fatal_error "Fatal configuration error."
+ func__fatal_error ${1+"$@"} \
+ "See the $PACKAGE documentation for more information." \
+ "Fatal configuration error."
}
# func_config
+# -----------
# Display the configuration for all the tags in this script.
func_config ()
{
@@ -915,17 +2149,19 @@
exit $?
}
+
# func_features
+# -------------
# Display the features supported by this script.
func_features ()
{
echo "host: $host"
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
echo "enable shared libraries"
else
echo "disable shared libraries"
fi
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
echo "enable static libraries"
else
echo "disable static libraries"
@@ -934,314 +2170,350 @@
exit $?
}
-# func_enable_tag tagname
+
+# func_enable_tag TAGNAME
+# -----------------------
# Verify that TAGNAME is valid, and either flag an error and exit, or
# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
# variable here.
func_enable_tag ()
{
- # Global variable:
- tagname="$1"
+ # Global variable:
+ tagname=$1
- re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
- re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
- sed_extractcf="/$re_begincf/,/$re_endcf/p"
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf=/$re_begincf/,/$re_endcf/p
- # Validate tagname.
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- func_fatal_error "invalid tag name: $tagname"
- ;;
- esac
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
- # Don't test for the "default" C tag, as we know it's
- # there but not specially marked.
- case $tagname in
- CC) ;;
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
*)
- if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
- taglist="$taglist $tagname"
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
- # Evaluate the configuration. Be careful to quote the path
- # and the sed script, to avoid splitting on whitespace, but
- # also don't use non-portable quotes within backquotes within
- # quotes we have to do it in 2 steps:
- extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
- eval "$extractedcf"
- else
- func_error "ignoring unknown tag $tagname"
- fi
- ;;
- esac
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
}
+
# func_check_version_match
+# ------------------------
# Ensure that we are using m4 macros, and libtool script from the same
# release of libtool.
func_check_version_match ()
{
- if test "$package_revision" != "$macro_revision"; then
- if test "$VERSION" != "$macro_version"; then
- if test -z "$macro_version"; then
- cat >&2 <<_LT_EOF
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from an older release.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
- else
- cat >&2 <<_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
- fi
- else
- cat >&2 <<_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
$progname: but the definition of this LT_INIT comes from revision $macro_revision.
$progname: You should recreate aclocal.m4 with macros from revision $package_revision
$progname: of $PACKAGE $VERSION and run autoconf again.
_LT_EOF
- fi
+ fi
- exit $EXIT_MISMATCH
- fi
+ exit $EXIT_MISMATCH
+ fi
}
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
- shift; set dummy --mode clean ${1+"$@"}; shift
- ;;
-compile|compil|compi|comp|com|co|c)
- shift; set dummy --mode compile ${1+"$@"}; shift
- ;;
-execute|execut|execu|exec|exe|ex|e)
- shift; set dummy --mode execute ${1+"$@"}; shift
- ;;
-finish|finis|fini|fin|fi|f)
- shift; set dummy --mode finish ${1+"$@"}; shift
- ;;
-install|instal|insta|inst|ins|in|i)
- shift; set dummy --mode install ${1+"$@"}; shift
- ;;
-link|lin|li|l)
- shift; set dummy --mode link ${1+"$@"}; shift
- ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
- shift; set dummy --mode uninstall ${1+"$@"}; shift
- ;;
-esac
-
-
-
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_warning=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
-
-
-# Parse options once, thoroughly. This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
+# libtool_options_prep [ARG]...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
{
- # this just eases exit handling
- while test $# -gt 0; do
- opt="$1"
- shift
- case $opt in
- --debug|-x) opt_debug='set -x'
- func_echo "enabling shell trace mode"
- $opt_debug
- ;;
- --dry-run|--dryrun|-n)
- opt_dry_run=:
- ;;
- --config)
- opt_config=:
-func_config
- ;;
- --dlopen|-dlopen)
- optarg="$1"
- opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
- shift
- ;;
- --preserve-dup-deps)
- opt_preserve_dup_deps=:
- ;;
- --features)
- opt_features=:
-func_features
- ;;
- --finish)
- opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
- ;;
- --help)
- opt_help=:
- ;;
- --help-all)
- opt_help_all=:
-opt_help=': help-all'
- ;;
- --mode)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_mode="$optarg"
-case $optarg in
- # Valid mode arguments:
- clean|compile|execute|finish|install|link|relink|uninstall) ;;
+ $debug_mode
- # Catch anything else as an error
- *) func_error "invalid argument for $opt"
- exit_cmd=exit
- break
- ;;
-esac
- shift
- ;;
- --no-silent|--no-quiet)
- opt_silent=false
-func_append preserve_args " $opt"
- ;;
- --no-warning|--no-warn)
- opt_warning=false
-func_append preserve_args " $opt"
- ;;
- --no-verbose)
- opt_verbose=false
-func_append preserve_args " $opt"
- ;;
- --silent|--quiet)
- opt_silent=:
-func_append preserve_args " $opt"
- opt_verbose=false
- ;;
- --verbose|-v)
- opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
- ;;
- --tag)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
- shift
- ;;
+ # Option defaults:
+ opt_config=false
+ opt_dlopen=
+ opt_dry_run=false
+ opt_help=false
+ opt_mode=
+ opt_preserve_dup_deps=false
+ opt_quiet=false
- -\?|-h) func_usage ;;
- --help) func_help ;;
- --version) func_version ;;
+ nonopt=
+ preserve_args=
- # Separate optargs to long options:
- --*=*)
- func_split_long_opt "$opt"
- set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
- shift
- ;;
-
- # Separate non-argument short options:
- -\?*|-h*|-n*|-v*)
- func_split_short_opt "$opt"
- set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
- shift
- ;;
-
- --) break ;;
- -*) func_fatal_help "unrecognized option \`$opt'" ;;
- *) set dummy "$opt" ${1+"$@"}; shift; break ;;
+ # Shorthand for --mode=foo, only valid as the first argument
+ case $1 in
+ clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+ compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+ execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+ finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+ link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
esac
- done
- # Validate options:
-
- # save first non-option argument
- if test "$#" -gt 0; then
- nonopt="$opt"
- shift
- fi
-
- # preserve --debug
- test "$opt_debug" = : || func_append preserve_args " --debug"
-
- case $host in
- *cygwin* | *mingw* | *pw32* | *cegcc*)
- # don't eliminate duplications in $postdeps and $predeps
- opt_duplicate_compiler_generated_deps=:
- ;;
- *)
- opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
- ;;
- esac
-
- $opt_help || {
- # Sanity checks first:
- func_check_version_match
-
- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- func_fatal_configuration "not configured to build any kind of library"
- fi
-
- # Darwin sucks
- eval std_shrext=\"$shrext_cmds\"
-
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
- func_error "unrecognized option \`-dlopen'"
- $ECHO "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$progname --help --mode=$opt_mode' for more information."
- }
-
-
- # Bail if the options were screwed
- $exit_cmd $EXIT_FAILURE
+ # Pass back the list of options.
+ func_quote_for_eval ${1+"$@"}
+ libtool_options_prep_result=$func_quote_for_eval_result
}
+func_add_hook func_options_prep libtool_options_prep
+# libtool_parse_options [ARG]...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
+{
+ $debug_cmd
+
+ # Perform our own loop to consume as many options as possible in
+ # each iteration.
+ while test $# -gt 0; do
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+
+ --config) func_config ;;
+
+ --dlopen|-dlopen)
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+ shift
+ ;;
+
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=: ;;
+
+ --features) func_features ;;
+
+ --finish) set dummy --mode finish ${1+"$@"}; shift ;;
+
+ --help) opt_help=: ;;
+
+ --help-all) opt_help=': help-all' ;;
+
+ --mode) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_mode=$1
+ case $1 in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $_G_opt"
+ exit_cmd=exit
+ break
+ ;;
+ esac
+ shift
+ ;;
+
+ --no-silent|--no-quiet)
+ opt_quiet=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ opt_warning=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-verbose)
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --silent|--quiet)
+ opt_quiet=:
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --tag) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_tag=$1
+ func_append preserve_args " $_G_opt $1"
+ func_enable_tag "$1"
+ shift
+ ;;
+
+ --verbose|-v) opt_quiet=false
+ opt_verbose=:
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ # An option not handled by this hook function:
+ *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+
+ # save modified positional parameters for caller
+ func_quote_for_eval ${1+"$@"}
+ libtool_parse_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_parse_options libtool_parse_options
+
+
+
+# libtool_validate_options [ARG]...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+ # save first non-option argument
+ if test 0 -lt $#; then
+ nonopt=$1
+ shift
+ fi
+
+ # preserve --debug
+ test : = "$debug_cmd" || func_append preserve_args " --debug"
+
+ case $host in
+ # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+ # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+ *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
+
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ test yes != "$build_libtool_libs" \
+ && test yes != "$build_old_libs" \
+ && func_fatal_configuration "not configured to build any kind of library"
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+ func_error "unrecognized option '-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help=$help
+ help="Try '$progname --help --mode=$opt_mode' for more information."
+ }
+
+ # Pass back the unparsed argument list
+ func_quote_for_eval ${1+"$@"}
+ libtool_validate_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_validate_options libtool_validate_options
+
+
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
+
## ----------- ##
## Main. ##
## ----------- ##
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+ $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
# func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_lalib_p ()
{
test -f "$1" &&
- $SED -e 4q "$1" 2>/dev/null \
- | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+ $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
}
# func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function implements the same check as func_lalib_p without
# resorting to external programs. To this end, it redirects stdin and
# closes it afterwards, without saving the original file descriptor.
# As a safety measure, use it only where a negative result would be
-# fatal anyway. Works if `file' does not exist.
+# fatal anyway. Works if 'file' does not exist.
func_lalib_unsafe_p ()
{
lalib_p=no
@@ -1249,13 +2521,13 @@
for lalib_p_l in 1 2 3 4
do
read lalib_p_line
- case "$lalib_p_line" in
+ case $lalib_p_line in
\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
esac
done
exec 0<&5 5<&-
fi
- test "$lalib_p" = yes
+ test yes = "$lalib_p"
}
# func_ltwrapper_script_p file
@@ -1264,7 +2536,8 @@
# determined imposters.
func_ltwrapper_script_p ()
{
- func_lalib_p "$1"
+ test -f "$1" &&
+ $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
}
# func_ltwrapper_executable_p file
@@ -1289,7 +2562,7 @@
{
func_dirname_and_basename "$1" "" "."
func_stripname '' '.exe' "$func_basename_result"
- func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
}
# func_ltwrapper_p file
@@ -1308,11 +2581,13 @@
# FAIL_CMD may read-access the current command in variable CMD!
func_execute_cmds ()
{
- $opt_debug
+ $debug_cmd
+
save_ifs=$IFS; IFS='~'
for cmd in $1; do
- IFS=$save_ifs
+ IFS=$sp$nl
eval cmd=\"$cmd\"
+ IFS=$save_ifs
func_show_eval "$cmd" "${2-:}"
done
IFS=$save_ifs
@@ -1324,10 +2599,11 @@
# Note that it is not necessary on cygwin/mingw to append a dot to
# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
# behavior happens only for exec(3), not for open(2)! Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
+# 'FILE.' does not work on cygwin managed mounts.
func_source ()
{
- $opt_debug
+ $debug_cmd
+
case $1 in
*/* | *\\*) . "$1" ;;
*) . "./$1" ;;
@@ -1354,10 +2630,10 @@
# store the result into func_replace_sysroot_result.
func_replace_sysroot ()
{
- case "$lt_sysroot:$1" in
+ case $lt_sysroot:$1 in
?*:"$lt_sysroot"*)
func_stripname "$lt_sysroot" '' "$1"
- func_replace_sysroot_result="=$func_stripname_result"
+ func_replace_sysroot_result='='$func_stripname_result
;;
*)
# Including no sysroot.
@@ -1374,7 +2650,8 @@
# arg is usually of the form 'gcc ...'
func_infer_tag ()
{
- $opt_debug
+ $debug_cmd
+
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
@@ -1393,7 +2670,7 @@
for z in $available_tags; do
if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
# Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
CC_quoted=
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
@@ -1418,7 +2695,7 @@
# line option must be used.
if test -z "$tagname"; then
func_echo "unable to infer tagged configuration"
- func_fatal_error "specify a tag with \`--tag'"
+ func_fatal_error "specify a tag with '--tag'"
# else
# func_verbose "using $tagname tagged configuration"
fi
@@ -1434,15 +2711,15 @@
# but don't create it if we're doing a dry run.
func_write_libtool_object ()
{
- write_libobj=${1}
- if test "$build_libtool_libs" = yes; then
- write_lobj=\'${2}\'
+ write_libobj=$1
+ if test yes = "$build_libtool_libs"; then
+ write_lobj=\'$2\'
else
write_lobj=none
fi
- if test "$build_old_libs" = yes; then
- write_oldobj=\'${3}\'
+ if test yes = "$build_old_libs"; then
+ write_oldobj=\'$3\'
else
write_oldobj=none
fi
@@ -1450,7 +2727,7 @@
$opt_dry_run || {
cat >${write_libobj}T <<EOF
# $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
@@ -1462,7 +2739,7 @@
non_pic_object=$write_oldobj
EOF
- $MV "${write_libobj}T" "${write_libobj}"
+ $MV "${write_libobj}T" "$write_libobj"
}
}
@@ -1482,8 +2759,9 @@
# be empty on error (or when ARG is empty)
func_convert_core_file_wine_to_w32 ()
{
- $opt_debug
- func_convert_core_file_wine_to_w32_result="$1"
+ $debug_cmd
+
+ func_convert_core_file_wine_to_w32_result=$1
if test -n "$1"; then
# Unfortunately, winepath does not exit with a non-zero error code, so we
# are forced to check the contents of stdout. On the other hand, if the
@@ -1491,9 +2769,9 @@
# *an error message* to stdout. So we must check for both error code of
# zero AND non-empty stdout, which explains the odd construction:
func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
- if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
- $SED -e "$lt_sed_naive_backslashify"`
+ $SED -e "$sed_naive_backslashify"`
else
func_convert_core_file_wine_to_w32_result=
fi
@@ -1514,18 +2792,19 @@
# are convertible, then the result may be empty.
func_convert_core_path_wine_to_w32 ()
{
- $opt_debug
+ $debug_cmd
+
# unfortunately, winepath doesn't convert paths, only file names
- func_convert_core_path_wine_to_w32_result=""
+ func_convert_core_path_wine_to_w32_result=
if test -n "$1"; then
oldIFS=$IFS
IFS=:
for func_convert_core_path_wine_to_w32_f in $1; do
IFS=$oldIFS
func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
- if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -n "$func_convert_core_file_wine_to_w32_result"; then
if test -z "$func_convert_core_path_wine_to_w32_result"; then
- func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
else
func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
fi
@@ -1554,7 +2833,8 @@
# environment variable; do not put it in $PATH.
func_cygpath ()
{
- $opt_debug
+ $debug_cmd
+
if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
if test "$?" -ne 0; then
@@ -1563,7 +2843,7 @@
fi
else
func_cygpath_result=
- func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
fi
}
#end: func_cygpath
@@ -1574,10 +2854,11 @@
# result in func_convert_core_msys_to_w32_result.
func_convert_core_msys_to_w32 ()
{
- $opt_debug
+ $debug_cmd
+
# awkward: cmd appends spaces to result
func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
- $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+ $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
}
#end: func_convert_core_msys_to_w32
@@ -1588,13 +2869,14 @@
# func_to_host_file_result to ARG1).
func_convert_file_check ()
{
- $opt_debug
- if test -z "$2" && test -n "$1" ; then
+ $debug_cmd
+
+ if test -z "$2" && test -n "$1"; then
func_error "Could not determine host file name corresponding to"
- func_error " \`$1'"
+ func_error " '$1'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback:
- func_to_host_file_result="$1"
+ func_to_host_file_result=$1
fi
}
# end func_convert_file_check
@@ -1606,10 +2888,11 @@
# func_to_host_file_result to a simplistic fallback value (see below).
func_convert_path_check ()
{
- $opt_debug
+ $debug_cmd
+
if test -z "$4" && test -n "$3"; then
func_error "Could not determine the host path corresponding to"
- func_error " \`$3'"
+ func_error " '$3'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback. This is a deliberately simplistic "conversion" and
# should not be "improved". See libtool.info.
@@ -1618,7 +2901,7 @@
func_to_host_path_result=`echo "$3" |
$SED -e "$lt_replace_pathsep_chars"`
else
- func_to_host_path_result="$3"
+ func_to_host_path_result=$3
fi
fi
}
@@ -1630,9 +2913,10 @@
# and appending REPL if ORIG matches BACKPAT.
func_convert_path_front_back_pathsep ()
{
- $opt_debug
+ $debug_cmd
+
case $4 in
- $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ $1 ) func_to_host_path_result=$3$func_to_host_path_result
;;
esac
case $4 in
@@ -1646,7 +2930,7 @@
##################################################
# $build to $host FILE NAME CONVERSION FUNCTIONS #
##################################################
-# invoked via `$to_host_file_cmd ARG'
+# invoked via '$to_host_file_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# Result will be available in $func_to_host_file_result.
@@ -1657,7 +2941,8 @@
# in func_to_host_file_result.
func_to_host_file ()
{
- $opt_debug
+ $debug_cmd
+
$to_host_file_cmd "$1"
}
# end func_to_host_file
@@ -1669,7 +2954,8 @@
# in (the comma separated) LAZY, no conversion takes place.
func_to_tool_file ()
{
- $opt_debug
+ $debug_cmd
+
case ,$2, in
*,"$to_tool_file_cmd",*)
func_to_tool_file_result=$1
@@ -1687,7 +2973,7 @@
# Copy ARG to func_to_host_file_result.
func_convert_file_noop ()
{
- func_to_host_file_result="$1"
+ func_to_host_file_result=$1
}
# end func_convert_file_noop
@@ -1698,11 +2984,12 @@
# func_to_host_file_result.
func_convert_file_msys_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result=$func_convert_core_msys_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
@@ -1714,8 +3001,9 @@
# func_to_host_file_result.
func_convert_file_cygwin_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
# because $build is cygwin, we call "the" cygpath in $PATH; no need to use
# LT_CYGPATH in this case.
@@ -1731,11 +3019,12 @@
# and a working winepath. Returns result in func_to_host_file_result.
func_convert_file_nix_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_file_wine_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
@@ -1747,12 +3036,13 @@
# Returns result in func_to_host_file_result.
func_convert_file_msys_to_cygwin ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
func_cygpath -u "$func_convert_core_msys_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
+ func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
@@ -1765,13 +3055,14 @@
# in func_to_host_file_result.
func_convert_file_nix_to_cygwin ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
# convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
func_convert_core_file_wine_to_w32 "$1"
func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
+ func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
@@ -1781,7 +3072,7 @@
#############################################
# $build to $host PATH CONVERSION FUNCTIONS #
#############################################
-# invoked via `$to_host_path_cmd ARG'
+# invoked via '$to_host_path_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# The result will be available in $func_to_host_path_result.
@@ -1805,10 +3096,11 @@
to_host_path_cmd=
func_init_to_host_path_cmd ()
{
- $opt_debug
+ $debug_cmd
+
if test -z "$to_host_path_cmd"; then
func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
- to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ to_host_path_cmd=func_convert_path_$func_stripname_result
fi
}
@@ -1818,7 +3110,8 @@
# in func_to_host_path_result.
func_to_host_path ()
{
- $opt_debug
+ $debug_cmd
+
func_init_to_host_path_cmd
$to_host_path_cmd "$1"
}
@@ -1829,7 +3122,7 @@
# Copy ARG to func_to_host_path_result.
func_convert_path_noop ()
{
- func_to_host_path_result="$1"
+ func_to_host_path_result=$1
}
# end func_convert_path_noop
@@ -1840,8 +3133,9 @@
# func_to_host_path_result.
func_convert_path_msys_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from ARG. MSYS
# behavior is inconsistent here; cygpath turns them into '.;' and ';.';
@@ -1849,7 +3143,7 @@
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result=$func_convert_core_msys_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
@@ -1863,8 +3157,9 @@
# func_to_host_file_result.
func_convert_path_cygwin_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
@@ -1883,14 +3178,15 @@
# a working winepath. Returns result in func_to_host_file_result.
func_convert_path_nix_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
@@ -1904,15 +3200,16 @@
# Returns result in func_to_host_file_result.
func_convert_path_msys_to_cygwin ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
+ func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
@@ -1927,8 +3224,9 @@
# func_to_host_file_result.
func_convert_path_nix_to_cygwin ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from
# ARG. msys behavior is inconsistent here, cygpath turns them
@@ -1937,7 +3235,7 @@
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
+ func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
@@ -1946,13 +3244,31 @@
# end func_convert_path_nix_to_cygwin
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+ $debug_cmd
+
+ func_dll_def_p_tmp=`$SED -n \
+ -e 's/^[ ]*//' \
+ -e '/^\(;.*\)*$/d' \
+ -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \
+ -e q \
+ "$1"`
+ test DEF = "$func_dll_def_p_tmp"
+}
+
+
# func_mode_compile arg...
func_mode_compile ()
{
- $opt_debug
+ $debug_cmd
+
# Get the compilation command and the source file.
base_compile=
- srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ srcfile=$nonopt # always keep a non-empty value in "srcfile"
suppress_opt=yes
suppress_output=
arg_mode=normal
@@ -1965,12 +3281,12 @@
case $arg_mode in
arg )
# do not "continue". Instead, add this to base_compile
- lastarg="$arg"
+ lastarg=$arg
arg_mode=normal
;;
target )
- libobj="$arg"
+ libobj=$arg
arg_mode=normal
continue
;;
@@ -1980,7 +3296,7 @@
case $arg in
-o)
test -n "$libobj" && \
- func_fatal_error "you cannot specify \`-o' more than once"
+ func_fatal_error "you cannot specify '-o' more than once"
arg_mode=target
continue
;;
@@ -2009,12 +3325,12 @@
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
lastarg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for arg in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_append_quoted lastarg "$arg"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$lastarg"
lastarg=$func_stripname_result
@@ -2027,8 +3343,8 @@
# Accept the current argument as the source file.
# The previous "srcfile" becomes the current argument.
#
- lastarg="$srcfile"
- srcfile="$arg"
+ lastarg=$srcfile
+ srcfile=$arg
;;
esac # case $arg
;;
@@ -2043,13 +3359,13 @@
func_fatal_error "you must specify an argument for -Xcompile"
;;
target)
- func_fatal_error "you must specify a target with \`-o'"
+ func_fatal_error "you must specify a target with '-o'"
;;
*)
# Get the name of the library object.
test -z "$libobj" && {
func_basename "$srcfile"
- libobj="$func_basename_result"
+ libobj=$func_basename_result
}
;;
esac
@@ -2069,7 +3385,7 @@
case $libobj in
*.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
*)
- func_fatal_error "cannot determine name of library object from \`$libobj'"
+ func_fatal_error "cannot determine name of library object from '$libobj'"
;;
esac
@@ -2078,8 +3394,8 @@
for arg in $later; do
case $arg in
-shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
+ test yes = "$build_libtool_libs" \
+ || func_fatal_configuration "cannot build a shared library"
build_old_libs=no
continue
;;
@@ -2105,17 +3421,17 @@
func_quote_for_eval "$libobj"
test "X$libobj" != "X$func_quote_for_eval_result" \
&& $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
- && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ && func_warning "libobj name '$libobj' may not contain shell special characters."
func_dirname_and_basename "$obj" "/" ""
- objname="$func_basename_result"
- xdir="$func_dirname_result"
- lobj=${xdir}$objdir/$objname
+ objname=$func_basename_result
+ xdir=$func_dirname_result
+ lobj=$xdir$objdir/$objname
test -z "$base_compile" && \
func_fatal_help "you must specify a compilation command"
# Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
removelist="$obj $lobj $libobj ${libobj}T"
else
removelist="$lobj $libobj ${libobj}T"
@@ -2127,16 +3443,16 @@
pic_mode=default
;;
esac
- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
# non-PIC code in shared libraries is not supported
pic_mode=default
fi
# Calculate the filename of the output object if compiler does
# not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
+ if test no = "$compiler_c_o"; then
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
+ lockfile=$output_obj.lock
else
output_obj=
need_locks=no
@@ -2145,12 +3461,12 @@
# Lock this critical section if it is needed
# We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
+ if test yes = "$need_locks"; then
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
sleep 2
done
- elif test "$need_locks" = warn; then
+ elif test warn = "$need_locks"; then
if test -f "$lockfile"; then
$ECHO "\
*** ERROR, $lockfile exists and contains:
@@ -2158,7 +3474,7 @@
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
@@ -2180,11 +3496,11 @@
qsrcfile=$func_quote_for_eval_result
# Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
# Without this assignment, base_compile gets emptied.
fbsd_hideous_sh_bug=$base_compile
- if test "$pic_mode" != no; then
+ if test no != "$pic_mode"; then
command="$base_compile $qsrcfile $pic_flag"
else
# Don't build PIC code
@@ -2201,7 +3517,7 @@
func_show_eval_locale "$command" \
'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
- if test "$need_locks" = warn &&
+ if test warn = "$need_locks" &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
@@ -2212,7 +3528,7 @@
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
@@ -2228,20 +3544,20 @@
fi
# Allow error messages only from the first compilation.
- if test "$suppress_opt" = yes; then
+ if test yes = "$suppress_opt"; then
suppress_output=' >/dev/null 2>&1'
fi
fi
# Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- if test "$pic_mode" != yes; then
+ if test yes = "$build_old_libs"; then
+ if test yes != "$pic_mode"; then
# Don't build PIC code
command="$base_compile $qsrcfile$pie_flag"
else
command="$base_compile $qsrcfile $pic_flag"
fi
- if test "$compiler_c_o" = yes; then
+ if test yes = "$compiler_c_o"; then
func_append command " -o $obj"
fi
@@ -2250,7 +3566,7 @@
func_show_eval_locale "$command" \
'$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
- if test "$need_locks" = warn &&
+ if test warn = "$need_locks" &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
@@ -2261,7 +3577,7 @@
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
@@ -2281,7 +3597,7 @@
func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
# Unlock the critical section if it was locked
- if test "$need_locks" != no; then
+ if test no != "$need_locks"; then
removelist=$lockfile
$RM "$lockfile"
fi
@@ -2291,7 +3607,7 @@
}
$opt_help || {
- test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+ test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
}
func_mode_help ()
@@ -2311,7 +3627,7 @@
Remove files from the build directory.
RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
to RM.
If FILE is a libtool library, object or program, all the files associated
@@ -2330,16 +3646,16 @@
-no-suppress do not suppress compiler output for multiple passes
-prefer-pic try to build PIC objects only
-prefer-non-pic try to build non-PIC objects only
- -shared do not build a \`.o' file suitable for static linking
- -static only build a \`.o' file suitable for static linking
+ -shared do not build a '.o' file suitable for static linking
+ -static only build a '.o' file suitable for static linking
-Wc,FLAG pass FLAG directly to the compiler
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
from the given SOURCEFILE.
The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
;;
execute)
@@ -2352,7 +3668,7 @@
-dlopen FILE add the directory containing FILE to the library path
-This mode sets the library path environment variable according to \`-dlopen'
+This mode sets the library path environment variable according to '-dlopen'
flags.
If any of the ARGS are libtool executable wrappers, then they are translated
@@ -2371,7 +3687,7 @@
Each LIBDIR is a directory that contains libtool libraries.
The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
+the '--dry-run' option if you just want to see what would be executed."
;;
install)
@@ -2381,7 +3697,7 @@
Install executables or libraries.
INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
+either the 'install' or 'cp' program.
The following components of INSTALL-COMMAND are treated specially:
@@ -2407,7 +3723,7 @@
-avoid-version do not add a version suffix if possible
-bindir BINDIR specify path to binaries directory (for systems where
libraries must be found in the PATH setting at runtime)
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
@@ -2421,7 +3737,8 @@
-no-install link a not-installable executable
-no-undefined declare that a library does not refer to external symbols
-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
+ -objectlist FILE use a list of object files found in FILE to specify objects
+ -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes)
-precious-files-regex REGEX
don't remove output files matching REGEX
-release RELEASE specify package release information
@@ -2441,20 +3758,20 @@
-Xlinker FLAG pass linker-specific FLAG directly to the linker
-XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
-All other options (arguments beginning with \`-') are ignored.
+All other options (arguments beginning with '-') are ignored.
-Every other argument is treated as a filename. Files ending in \`.la' are
+Every other argument is treated as a filename. Files ending in '.la' are
treated as uninstalled libtool libraries, other files are standard or library
object files.
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
required, except when creating a convenience library.
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
is created, otherwise an executable program is created."
;;
@@ -2465,7 +3782,7 @@
Remove libraries from an installation directory.
RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
to RM.
If FILE is a libtool library, all the files associated with it are deleted.
@@ -2473,17 +3790,17 @@
;;
*)
- func_fatal_help "invalid operation mode \`$opt_mode'"
+ func_fatal_help "invalid operation mode '$opt_mode'"
;;
esac
echo
- $ECHO "Try \`$progname --help' for more information about other modes."
+ $ECHO "Try '$progname --help' for more information about other modes."
}
# Now that we've collected a possible --mode arg, show help if necessary
if $opt_help; then
- if test "$opt_help" = :; then
+ if test : = "$opt_help"; then
func_mode_help
else
{
@@ -2491,7 +3808,7 @@
for opt_mode in compile link execute install finish uninstall clean; do
func_mode_help
done
- } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ } | $SED -n '1p; 2,$s/^Usage:/ or: /p'
{
func_help noexit
for opt_mode in compile link execute install finish uninstall clean; do
@@ -2499,7 +3816,7 @@
func_mode_help
done
} |
- sed '1d
+ $SED '1d
/^When reporting/,/^Report/{
H
d
@@ -2516,16 +3833,17 @@
# func_mode_execute arg...
func_mode_execute ()
{
- $opt_debug
+ $debug_cmd
+
# The first argument is the command name.
- cmd="$nonopt"
+ cmd=$nonopt
test -z "$cmd" && \
func_fatal_help "you must specify a COMMAND"
# Handle -dlopen flags immediately.
for file in $opt_dlopen; do
test -f "$file" \
- || func_fatal_help "\`$file' is not a file"
+ || func_fatal_help "'$file' is not a file"
dir=
case $file in
@@ -2535,7 +3853,7 @@
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$lib' is not a valid libtool archive"
+ || func_fatal_help "'$lib' is not a valid libtool archive"
# Read the libtool library.
dlname=
@@ -2546,18 +3864,18 @@
if test -z "$dlname"; then
# Warn if it was a shared library.
test -n "$library_names" && \
- func_warning "\`$file' was not linked with \`-export-dynamic'"
+ func_warning "'$file' was not linked with '-export-dynamic'"
continue
fi
func_dirname "$file" "" "."
- dir="$func_dirname_result"
+ dir=$func_dirname_result
if test -f "$dir/$objdir/$dlname"; then
func_append dir "/$objdir"
else
if test ! -f "$dir/$dlname"; then
- func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
fi
fi
;;
@@ -2565,18 +3883,18 @@
*.lo)
# Just add the directory containing the .lo file.
func_dirname "$file" "" "."
- dir="$func_dirname_result"
+ dir=$func_dirname_result
;;
*)
- func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
continue
;;
esac
# Get the absolute pathname.
absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
+ test -n "$absdir" && dir=$absdir
# Now add the directory to shlibpath_var.
if eval "test -z \"\$$shlibpath_var\""; then
@@ -2588,7 +3906,7 @@
# This variable tells wrapper scripts just to set shlibpath_var
# rather than running their programs.
- libtool_execute_magic="$magic"
+ libtool_execute_magic=$magic
# Check if any of the arguments is a wrapper script.
args=
@@ -2601,12 +3919,12 @@
if func_ltwrapper_script_p "$file"; then
func_source "$file"
# Transform arg to wrapped name.
- file="$progdir/$program"
+ file=$progdir/$program
elif func_ltwrapper_executable_p "$file"; then
func_ltwrapper_scriptname "$file"
func_source "$func_ltwrapper_scriptname_result"
# Transform arg to wrapped name.
- file="$progdir/$program"
+ file=$progdir/$program
fi
;;
esac
@@ -2614,7 +3932,15 @@
func_append_quoted args "$file"
done
- if test "X$opt_dry_run" = Xfalse; then
+ if $opt_dry_run; then
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ else
if test -n "$shlibpath_var"; then
# Export the shlibpath_var.
eval "export $shlibpath_var"
@@ -2631,25 +3957,18 @@
done
# Now prepare to actually exec the command.
- exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
- echo "export $shlibpath_var"
- fi
- $ECHO "$cmd$args"
- exit $EXIT_SUCCESS
+ exec_cmd=\$cmd$args
fi
}
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
# func_mode_finish arg...
func_mode_finish ()
{
- $opt_debug
+ $debug_cmd
+
libs=
libdirs=
admincmds=
@@ -2663,11 +3982,11 @@
if func_lalib_unsafe_p "$opt"; then
func_append libs " $opt"
else
- func_warning "\`$opt' is not a valid libtool archive"
+ func_warning "'$opt' is not a valid libtool archive"
fi
else
- func_fatal_error "invalid argument \`$opt'"
+ func_fatal_error "invalid argument '$opt'"
fi
done
@@ -2682,12 +4001,12 @@
# Remove sysroot references
if $opt_dry_run; then
for lib in $libs; do
- echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ echo "removing references to $lt_sysroot and '=' prefixes from $lib"
done
else
tmpdir=`func_mktempdir`
for lib in $libs; do
- sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
> $tmpdir/tmp-la
mv -f $tmpdir/tmp-la $lib
done
@@ -2712,7 +4031,7 @@
fi
# Exit here if they wanted silent mode.
- $opt_silent && exit $EXIT_SUCCESS
+ $opt_quiet && exit $EXIT_SUCCESS
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
echo "----------------------------------------------------------------------"
@@ -2723,27 +4042,27 @@
echo
echo "If you ever happen to want to link against installed libraries"
echo "in a given directory, LIBDIR, you must either use libtool, and"
- echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "specify the full pathname of the library, or use the '-LLIBDIR'"
echo "flag during linking and do at least one of the following:"
if test -n "$shlibpath_var"; then
- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " - add LIBDIR to the '$shlibpath_var' environment variable"
echo " during execution"
fi
if test -n "$runpath_var"; then
- echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " - add LIBDIR to the '$runpath_var' environment variable"
echo " during linking"
fi
if test -n "$hardcode_libdir_flag_spec"; then
libdir=LIBDIR
eval flag=\"$hardcode_libdir_flag_spec\"
- $ECHO " - use the \`$flag' linker flag"
+ $ECHO " - use the '$flag' linker flag"
fi
if test -n "$admincmds"; then
$ECHO " - have your system administrator run these commands:$admincmds"
fi
if test -f /etc/ld.so.conf; then
- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
fi
echo
@@ -2762,18 +4081,20 @@
exit $EXIT_SUCCESS
}
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
# func_mode_install arg...
func_mode_install ()
{
- $opt_debug
+ $debug_cmd
+
# There may be an optional sh(1) argument at the beginning of
# install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
# Allow the use of GNU shtool's install command.
- case $nonopt in *shtool*) :;; *) false;; esac; then
+ case $nonopt in *shtool*) :;; *) false;; esac
+ then
# Aesthetically quote it.
func_quote_for_eval "$nonopt"
install_prog="$func_quote_for_eval_result "
@@ -2800,7 +4121,7 @@
opts=
prev=
install_type=
- isdir=no
+ isdir=false
stripme=
no_mode=:
for arg
@@ -2813,7 +4134,7 @@
fi
case $arg in
- -d) isdir=yes ;;
+ -d) isdir=: ;;
-f)
if $install_cp; then :; else
prev=$arg
@@ -2831,7 +4152,7 @@
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
- if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ if test X-m = "X$prev" && test -n "$install_override_mode"; then
arg2=$install_override_mode
no_mode=false
fi
@@ -2856,7 +4177,7 @@
func_fatal_help "you must specify an install program"
test -n "$prev" && \
- func_fatal_help "the \`$prev' option requires an argument"
+ func_fatal_help "the '$prev' option requires an argument"
if test -n "$install_override_mode" && $no_mode; then
if $install_cp; then :; else
@@ -2878,19 +4199,19 @@
dest=$func_stripname_result
# Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
+ test -d "$dest" && isdir=:
+ if $isdir; then
+ destdir=$dest
destname=
else
func_dirname_and_basename "$dest" "" "."
- destdir="$func_dirname_result"
- destname="$func_basename_result"
+ destdir=$func_dirname_result
+ destname=$func_basename_result
# Not a directory, so check to see that there is only one file specified.
set dummy $files; shift
test "$#" -gt 1 && \
- func_fatal_help "\`$dest' is not a directory"
+ func_fatal_help "'$dest' is not a directory"
fi
case $destdir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
@@ -2899,7 +4220,7 @@
case $file in
*.lo) ;;
*)
- func_fatal_help "\`$destdir' must be an absolute directory name"
+ func_fatal_help "'$destdir' must be an absolute directory name"
;;
esac
done
@@ -2908,7 +4229,7 @@
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
- libtool_install_magic="$magic"
+ libtool_install_magic=$magic
staticlibs=
future_libdirs=
@@ -2928,7 +4249,7 @@
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$file' is not a valid libtool archive"
+ || func_fatal_help "'$file' is not a valid libtool archive"
library_names=
old_library=
@@ -2950,7 +4271,7 @@
fi
func_dirname "$file" "/" ""
- dir="$func_dirname_result"
+ dir=$func_dirname_result
func_append dir "$objdir"
if test -n "$relink_command"; then
@@ -2964,7 +4285,7 @@
# are installed into $libdir/../bin (currently, that works fine)
# but it's something to keep an eye on.
test "$inst_prefix_dir" = "$destdir" && \
- func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+ func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
@@ -2973,29 +4294,36 @@
relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
fi
- func_warning "relinking \`$file'"
+ func_warning "relinking '$file'"
func_show_eval "$relink_command" \
- 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
fi
# See the names of the shared library.
set dummy $library_names; shift
if test -n "$1"; then
- realname="$1"
+ realname=$1
shift
- srcname="$realname"
- test -n "$relink_command" && srcname="$realname"T
+ srcname=$realname
+ test -n "$relink_command" && srcname=${realname}T
# Install the shared library and build the symlinks.
func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
'exit $?'
- tstripme="$stripme"
+ tstripme=$stripme
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
case $realname in
*.dll.a)
- tstripme=""
+ tstripme=
+ ;;
+ esac
+ ;;
+ os2*)
+ case $realname in
+ *_dll.a)
+ tstripme=
;;
esac
;;
@@ -3006,7 +4334,7 @@
if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
- # Try `ln -sf' first, because the `ln' binary might depend on
+ # Try 'ln -sf' first, because the 'ln' binary might depend on
# the symlink we replace! Solaris /bin/ln does not understand -f,
# so we also need to try rm && ln -s.
for linkname
@@ -3017,14 +4345,14 @@
fi
# Do each command in the postinstall commands.
- lib="$destdir/$realname"
+ lib=$destdir/$realname
func_execute_cmds "$postinstall_cmds" 'exit $?'
fi
# Install the pseudo-library for information purposes.
func_basename "$file"
- name="$func_basename_result"
- instname="$dir/$name"i
+ name=$func_basename_result
+ instname=$dir/${name}i
func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
# Maybe install the static library, too.
@@ -3036,11 +4364,11 @@
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
- destfile="$destdir/$destname"
+ destfile=$destdir/$destname
else
func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
fi
# Deduce the name of the destination old-style object file.
@@ -3050,11 +4378,11 @@
staticdest=$func_lo2o_result
;;
*.$objext)
- staticdest="$destfile"
+ staticdest=$destfile
destfile=
;;
*)
- func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ func_fatal_help "cannot copy a libtool object to '$destfile'"
;;
esac
@@ -3063,7 +4391,7 @@
func_show_eval "$install_prog $file $destfile" 'exit $?'
# Install the old object if enabled.
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
# Deduce the name of the old-style object file.
func_lo2o "$file"
staticobj=$func_lo2o_result
@@ -3075,23 +4403,23 @@
*)
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
- destfile="$destdir/$destname"
+ destfile=$destdir/$destname
else
func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
fi
# If the file is missing, and there is a .exe on the end, strip it
# because it is most likely a libtool script we actually want to
# install
- stripped_ext=""
+ stripped_ext=
case $file in
*.exe)
if test ! -f "$file"; then
func_stripname '' '.exe' "$file"
file=$func_stripname_result
- stripped_ext=".exe"
+ stripped_ext=.exe
fi
;;
esac
@@ -3119,19 +4447,19 @@
# Check the variables that should have been set.
test -z "$generated_by_libtool_version" && \
- func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+ func_fatal_error "invalid libtool wrapper script '$wrapper'"
- finalize=yes
+ finalize=:
for lib in $notinst_deplibs; do
# Check to see that each library is installed.
libdir=
if test -f "$lib"; then
func_source "$lib"
fi
- libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
if test -n "$libdir" && test ! -f "$libfile"; then
- func_warning "\`$lib' has not been installed in \`$libdir'"
- finalize=no
+ func_warning "'$lib' has not been installed in '$libdir'"
+ finalize=false
fi
done
@@ -3139,29 +4467,29 @@
func_source "$wrapper"
outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
+ if test no = "$fast_install" && test -n "$relink_command"; then
$opt_dry_run || {
- if test "$finalize" = yes; then
+ if $finalize; then
tmpdir=`func_mktempdir`
func_basename "$file$stripped_ext"
- file="$func_basename_result"
- outputname="$tmpdir/$file"
+ file=$func_basename_result
+ outputname=$tmpdir/$file
# Replace the output file specification.
relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
- $opt_silent || {
+ $opt_quiet || {
func_quote_for_expand "$relink_command"
eval "func_echo $func_quote_for_expand_result"
}
if eval "$relink_command"; then :
else
- func_error "error: relink \`$file' with the above command before installing it"
+ func_error "error: relink '$file' with the above command before installing it"
$opt_dry_run || ${RM}r "$tmpdir"
continue
fi
- file="$outputname"
+ file=$outputname
else
- func_warning "cannot relink \`$file'"
+ func_warning "cannot relink '$file'"
fi
}
else
@@ -3198,10 +4526,10 @@
for file in $staticlibs; do
func_basename "$file"
- name="$func_basename_result"
+ name=$func_basename_result
# Set up the ranlib parameters.
- oldlib="$destdir/$name"
+ oldlib=$destdir/$name
func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
tool_oldlib=$func_to_tool_file_result
@@ -3216,18 +4544,18 @@
done
test -n "$future_libdirs" && \
- func_warning "remember to run \`$progname --finish$future_libdirs'"
+ func_warning "remember to run '$progname --finish$future_libdirs'"
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
$opt_dry_run && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
else
exit $EXIT_SUCCESS
fi
}
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
# func_generate_dlsyms outputname originator pic_p
@@ -3235,16 +4563,17 @@
# a dlpreopen symbol table.
func_generate_dlsyms ()
{
- $opt_debug
- my_outputname="$1"
- my_originator="$2"
- my_pic_p="${3-no}"
- my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ $debug_cmd
+
+ my_outputname=$1
+ my_originator=$2
+ my_pic_p=${3-false}
+ my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
my_dlsyms=
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
if test -n "$NM" && test -n "$global_symbol_pipe"; then
- my_dlsyms="${my_outputname}S.c"
+ my_dlsyms=${my_outputname}S.c
else
func_error "not configured to extract global symbols from dlpreopened files"
fi
@@ -3255,7 +4584,7 @@
"") ;;
*.c)
# Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${my_outputname}.nm"
+ nlist=$output_objdir/$my_outputname.nm
func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
@@ -3263,34 +4592,36 @@
func_verbose "creating $output_objdir/$my_dlsyms"
$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
#ifdef __cplusplus
extern \"C\" {
#endif
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
#endif
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT_DLSYM_CONST
#else
# define LT_DLSYM_CONST const
#endif
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
/* External symbol declarations for the compiler. */\
"
- if test "$dlself" = yes; then
- func_verbose "generating symbol list for \`$output'"
+ if test yes = "$dlself"; then
+ func_verbose "generating symbol list for '$output'"
$opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
@@ -3298,7 +4629,7 @@
progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
for progfile in $progfiles; do
func_to_tool_file "$progfile" func_convert_file_msys_to_w32
- func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
$opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
done
@@ -3318,10 +4649,10 @@
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
+ export_symbols=$output_objdir/$outputname.exp
$opt_dry_run || {
$RM $export_symbols
- eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
case $host in
*cygwin* | *mingw* | *cegcc* )
eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
@@ -3331,7 +4662,7 @@
}
else
$opt_dry_run || {
- eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
case $host in
@@ -3345,22 +4676,22 @@
fi
for dlprefile in $dlprefiles; do
- func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_verbose "extracting global C symbols from '$dlprefile'"
func_basename "$dlprefile"
- name="$func_basename_result"
+ name=$func_basename_result
case $host in
*cygwin* | *mingw* | *cegcc* )
# if an import library, we need to obtain dlname
if func_win32_import_lib_p "$dlprefile"; then
func_tr_sh "$dlprefile"
eval "curr_lafile=\$libfile_$func_tr_sh_result"
- dlprefile_dlbasename=""
+ dlprefile_dlbasename=
if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
# Use subshell, to avoid clobbering current variable values
dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
- if test -n "$dlprefile_dlname" ; then
+ if test -n "$dlprefile_dlname"; then
func_basename "$dlprefile_dlname"
- dlprefile_dlbasename="$func_basename_result"
+ dlprefile_dlbasename=$func_basename_result
else
# no lafile. user explicitly requested -dlpreopen <import library>.
$sharedlib_from_linklib_cmd "$dlprefile"
@@ -3368,7 +4699,7 @@
fi
fi
$opt_dry_run || {
- if test -n "$dlprefile_dlbasename" ; then
+ if test -n "$dlprefile_dlbasename"; then
eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
else
func_warning "Could not compute DLL name from $name"
@@ -3424,6 +4755,11 @@
echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
fi
+ func_show_eval '$RM "${nlist}I"'
+ if test -n "$global_symbol_to_import"; then
+ eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+ fi
+
echo >> "$output_objdir/$my_dlsyms" "\
/* The mapping between symbol names and symbols. */
@@ -3432,11 +4768,30 @@
void *address;
} lt_dlsymlist;
extern LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
+lt_${my_prefix}_LTX_preloaded_symbols[];\
+"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+ LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+ for (; symbol->name; ++symbol)
+ {"
+ $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+ echo >> "$output_objdir/$my_dlsyms" "\
+ }
+}"
+ fi
+ echo >> "$output_objdir/$my_dlsyms" "\
LT_DLSYM_CONST lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
- { \"$my_originator\", (void *) 0 },"
+{ {\"$my_originator\", (void *) 0},"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {\"@INIT@\", (void *) <_syminit},"
+ fi
case $need_lib_prefix in
no)
@@ -3478,9 +4833,7 @@
*-*-hpux*)
pic_flag_for_symtable=" $pic_flag" ;;
*)
- if test "X$my_pic_p" != Xno; then
- pic_flag_for_symtable=" $pic_flag"
- fi
+ $my_pic_p && pic_flag_for_symtable=" $pic_flag"
;;
esac
;;
@@ -3497,10 +4850,10 @@
func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
# Clean up the generated files.
- func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
# Transform the symbol file into the correct name.
- symfileobj="$output_objdir/${my_outputname}S.$objext"
+ symfileobj=$output_objdir/${my_outputname}S.$objext
case $host in
*cygwin* | *mingw* | *cegcc* )
if test -f "$output_objdir/$my_outputname.def"; then
@@ -3518,7 +4871,7 @@
esac
;;
*)
- func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ func_fatal_error "unknown suffix for '$my_dlsyms'"
;;
esac
else
@@ -3532,6 +4885,32 @@
fi
}
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
# func_win32_libid arg
# return the library type of file 'arg'
#
@@ -3541,8 +4920,9 @@
# Despite the name, also deal with 64 bit binaries.
func_win32_libid ()
{
- $opt_debug
- win32_libid_type="unknown"
+ $debug_cmd
+
+ win32_libid_type=unknown
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
*ar\ archive\ import\ library*) # definitely import
@@ -3552,16 +4932,29 @@
# Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
$EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
- $SED -n -e '
+ case $nm_interface in
+ "MS dumpbin")
+ if func_cygming_ms_implib_p "$1" ||
+ func_cygming_gnu_implib_p "$1"
+ then
+ win32_nmres=import
+ else
+ win32_nmres=
+ fi
+ ;;
+ *)
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
1,100{
/ I /{
- s,.*,import,
+ s|.*|import|
p
q
}
}'`
+ ;;
+ esac
case $win32_nmres in
import*) win32_libid_type="x86 archive import";;
*) win32_libid_type="x86 archive static";;
@@ -3593,7 +4986,8 @@
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib ()
{
- $opt_debug
+ $debug_cmd
+
sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
}
@@ -3610,7 +5004,8 @@
# specified import library.
func_cygming_dll_for_implib_fallback_core ()
{
- $opt_debug
+ $debug_cmd
+
match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
$OBJDUMP -s --section "$1" "$2" 2>/dev/null |
$SED '/^Contents of section '"$match_literal"':/{
@@ -3646,8 +5041,8 @@
/./p' |
# we now have a list, one entry per line, of the stringified
# contents of the appropriate section of all members of the
- # archive which possess that section. Heuristic: eliminate
- # all those which have a first or second character that is
+ # archive that possess that section. Heuristic: eliminate
+ # all those that have a first or second character that is
# a '.' (that is, objdump's representation of an unprintable
# character.) This should work for all archives with less than
# 0x302f exports -- but will fail for DLLs whose name actually
@@ -3658,30 +5053,6 @@
$SED -e '/^\./d;/^.\./d;q'
}
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
- test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
- test -n "$func_cygming_ms_implib_tmp"
-}
-
# func_cygming_dll_for_implib_fallback ARG
# Platform-specific function to extract the
# name of the DLL associated with the specified
@@ -3695,16 +5066,17 @@
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib_fallback ()
{
- $opt_debug
- if func_cygming_gnu_implib_p "$1" ; then
+ $debug_cmd
+
+ if func_cygming_gnu_implib_p "$1"; then
# binutils import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
- elif func_cygming_ms_implib_p "$1" ; then
+ elif func_cygming_ms_implib_p "$1"; then
# ms-generated import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
else
# unknown
- sharedlib_from_linklib_result=""
+ sharedlib_from_linklib_result=
fi
}
@@ -3712,10 +5084,11 @@
# func_extract_an_archive dir oldlib
func_extract_an_archive ()
{
- $opt_debug
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
- if test "$lock_old_archive_extraction" = yes; then
+ $debug_cmd
+
+ f_ex_an_ar_dir=$1; shift
+ f_ex_an_ar_oldlib=$1
+ if test yes = "$lock_old_archive_extraction"; then
lockfile=$f_ex_an_ar_oldlib.lock
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
@@ -3724,7 +5097,7 @@
fi
func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
'stat=$?; rm -f "$lockfile"; exit $stat'
- if test "$lock_old_archive_extraction" = yes; then
+ if test yes = "$lock_old_archive_extraction"; then
$opt_dry_run || rm -f "$lockfile"
fi
if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
@@ -3738,22 +5111,23 @@
# func_extract_archives gentop oldlib ...
func_extract_archives ()
{
- $opt_debug
- my_gentop="$1"; shift
+ $debug_cmd
+
+ my_gentop=$1; shift
my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
+ my_oldobjs=
+ my_xlib=
+ my_xabs=
+ my_xdir=
for my_xlib in $my_oldlibs; do
# Extract the objects.
case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
*) my_xabs=`pwd`"/$my_xlib" ;;
esac
func_basename "$my_xlib"
- my_xlib="$func_basename_result"
+ my_xlib=$func_basename_result
my_xlib_u=$my_xlib
while :; do
case " $extracted_archives " in
@@ -3765,7 +5139,7 @@
esac
done
extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
+ my_xdir=$my_gentop/$my_xlib_u
func_mkdir_p "$my_xdir"
@@ -3778,22 +5152,23 @@
cd $my_xdir || exit $?
darwin_archive=$my_xabs
darwin_curdir=`pwd`
- darwin_base_archive=`basename "$darwin_archive"`
+ func_basename "$darwin_archive"
+ darwin_base_archive=$func_basename_result
darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
if test -n "$darwin_arches"; then
darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
darwin_arch=
func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ for darwin_arch in $darwin_arches; do
+ func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+ $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
+ cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+ func_extract_an_archive "`pwd`" "$darwin_base_archive"
cd "$darwin_curdir"
- $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
done # $darwin_arches
## Okay now we've a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
darwin_file=
darwin_files=
for darwin_file in $darwin_filelist; do
@@ -3815,7 +5190,7 @@
my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
done
- func_extract_archives_result="$my_oldobjs"
+ func_extract_archives_result=$my_oldobjs
}
@@ -3830,7 +5205,7 @@
#
# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
# variable will take. If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
+# will assume that the directory where it is stored is
# the $objdir directory. This is a cygwin/mingw-specific
# behavior.
func_emit_wrapper ()
@@ -3841,7 +5216,7 @@
#! $SHELL
# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
@@ -3898,9 +5273,9 @@
# Very basic option parsing. These options are (a) specific to
# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
+# /script/ and the wrapper /executable/ that is used only on
# windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
+# (application programs are unlikely to have options that match
# this pattern).
#
# There are only two supported options: --lt-debug and
@@ -3933,7 +5308,7 @@
# Print the debug banner immediately:
if test -n \"\$lt_option_debug\"; then
- echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
fi
}
@@ -3944,7 +5319,7 @@
lt_dump_args_N=1;
for lt_arg
do
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
done
}
@@ -3958,7 +5333,7 @@
*-*-mingw | *-*-os2* | *-cegcc*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
@@ -3968,7 +5343,7 @@
*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir/\$program\" \${1+\"\$@\"}
@@ -4043,13 +5418,13 @@
test -n \"\$absdir\" && thisdir=\"\$absdir\"
"
- if test "$fast_install" = yes; then
+ if test yes = "$fast_install"; then
$ECHO "\
program=lt-'$outputname'$exeext
progdir=\"\$thisdir/$objdir\"
if test ! -f \"\$progdir/\$program\" ||
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
test \"X\$file\" != \"X\$progdir/\$program\"; }; then
file=\"\$\$-\$program\"
@@ -4066,7 +5441,7 @@
if test -n \"\$relink_command\"; then
if relink_command_output=\`eval \$relink_command 2>&1\`; then :
else
- $ECHO \"\$relink_command_output\" >&2
+ \$ECHO \"\$relink_command_output\" >&2
$RM \"\$progdir/\$file\"
exit 1
fi
@@ -4101,7 +5476,7 @@
fi
# Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
$ECHO "\
# Add our own library path to $shlibpath_var
$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
@@ -4121,7 +5496,7 @@
fi
else
# The program doesn't exist.
- \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
\$ECHO \"This script is just a wrapper for \$program.\" 1>&2
\$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
exit 1
@@ -4140,7 +5515,7 @@
cat <<EOF
/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+ Generated by $PROGRAM (GNU $PACKAGE) $VERSION
The $output program cannot be directly executed until all the libtool
libraries that it depends on are installed.
@@ -4175,47 +5550,45 @@
#include <fcntl.h>
#include <sys/stat.h>
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
/* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
+#if defined __MINGW32__
# ifdef __STRICT_ANSI__
int _putenv (const char *);
# endif
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
# ifdef __STRICT_ANSI__
char *realpath (const char *, char *);
int putenv (char *);
int setenv (const char *, const char *, int);
# endif
-/* #elif defined (other platforms) ... */
+/* #elif defined other_platform || defined ... */
#endif
/* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
+#if defined _MSC_VER
# define setmode _setmode
# define stat _stat
# define chmod _chmod
# define getcwd _getcwd
# define putenv _putenv
# define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-# define _INTPTR_T_DEFINED
-# define intptr_t int
-# endif
-#elif defined(__MINGW32__)
+#elif defined __MINGW32__
# define setmode _setmode
# define stat _stat
# define chmod _chmod
# define getcwd _getcwd
# define putenv _putenv
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
# define HAVE_SETENV
# define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
+/* #elif defined other platforms ... */
#endif
-#if defined(PATH_MAX)
+#if defined PATH_MAX
# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
+#elif defined MAXPATHLEN
# define LT_PATHMAX MAXPATHLEN
#else
# define LT_PATHMAX 1024
@@ -4234,8 +5607,8 @@
# define PATH_SEPARATOR ':'
#endif
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+ defined __OS2__
# define HAVE_DOS_BASED_FILE_SYSTEM
# define FOPEN_WB "wb"
# ifndef DIR_SEPARATOR_2
@@ -4268,10 +5641,10 @@
#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
+ if (stale) { free (stale); stale = 0; } \
} while (0)
-#if defined(LT_DEBUGWRAPPER)
+#if defined LT_DEBUGWRAPPER
static int lt_debug = 1;
#else
static int lt_debug = 0;
@@ -4300,11 +5673,16 @@
EOF
cat <<EOF
-volatile const char * MAGIC_EXE = "$magic_exe";
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+# define externally_visible volatile
+#else
+# define externally_visible __attribute__((externally_visible)) volatile
+#endif
+externally_visible const char * MAGIC_EXE = "$magic_exe";
const char * LIB_PATH_VARNAME = "$shlibpath_var";
EOF
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
func_to_host_path "$temp_rpath"
cat <<EOF
const char * LIB_PATH_VALUE = "$func_to_host_path_result";
@@ -4328,7 +5706,7 @@
EOF
fi
- if test "$fast_install" = yes; then
+ if test yes = "$fast_install"; then
cat <<EOF
const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
EOF
@@ -4357,12 +5735,12 @@
char *actual_cwrapper_name;
char *target_name;
char *lt_argv_zero;
- intptr_t rval = 127;
+ int rval = 127;
int i;
program_name = (char *) xstrdup (base_name (argv[0]));
- newargz = XMALLOC (char *, argc + 1);
+ newargz = XMALLOC (char *, (size_t) argc + 1);
/* very simple arg parsing; don't want to rely on getopt
* also, copy all non cwrapper options to newargz, except
@@ -4371,10 +5749,10 @@
newargc=0;
for (i = 1; i < argc; i++)
{
- if (strcmp (argv[i], dumpscript_opt) == 0)
+ if (STREQ (argv[i], dumpscript_opt))
{
EOF
- case "$host" in
+ case $host in
*mingw* | *cygwin* )
# make stdout use "unix" line endings
echo " setmode(1,_O_BINARY);"
@@ -4385,12 +5763,12 @@
lt_dump_script (stdout);
return 0;
}
- if (strcmp (argv[i], debug_opt) == 0)
+ if (STREQ (argv[i], debug_opt))
{
lt_debug = 1;
continue;
}
- if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+ if (STREQ (argv[i], ltwrapper_option_prefix))
{
/* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
namespace, but it is not one of the ones we know about and
@@ -4413,7 +5791,7 @@
EOF
cat <<EOF
/* The GNU banner must be the first non-error debug message */
- lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
EOF
cat <<"EOF"
lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
@@ -4524,7 +5902,7 @@
cat <<"EOF"
/* execv doesn't actually work on mingw as expected on unix */
newargz = prepare_spawn (newargz);
- rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
if (rval == -1)
{
/* failed to start process */
@@ -4569,7 +5947,7 @@
{
const char *base;
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
/* Skip over the disk name in MSDOS pathnames. */
if (isalpha ((unsigned char) name[0]) && name[1] == ':')
name += 2;
@@ -4628,7 +6006,7 @@
const char *p_next;
/* static buffer for getcwd */
char tmp[LT_PATHMAX + 1];
- int tmp_len;
+ size_t tmp_len;
char *concat_name;
lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
@@ -4638,7 +6016,7 @@
return NULL;
/* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
{
concat_name = xstrdup (wrapper);
@@ -4656,7 +6034,7 @@
return concat_name;
XFREE (concat_name);
}
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
}
#endif
@@ -4679,7 +6057,7 @@
for (q = p; *q; q++)
if (IS_PATH_SEPARATOR (*q))
break;
- p_len = q - p;
+ p_len = (size_t) (q - p);
p_next = (*q == '\0' ? q : q + 1);
if (p_len == 0)
{
@@ -4798,7 +6176,7 @@
if (patlen <= len)
{
str += len - patlen;
- if (strcmp (str, pat) == 0)
+ if (STREQ (str, pat))
*str = '\0';
}
return str;
@@ -4863,7 +6241,7 @@
char *str = xstrdup (value);
setenv (name, str, 1);
#else
- int len = strlen (name) + 1 + strlen (value) + 1;
+ size_t len = strlen (name) + 1 + strlen (value) + 1;
char *str = XMALLOC (char, len);
sprintf (str, "%s=%s", name, value);
if (putenv (str) != EXIT_SUCCESS)
@@ -4880,8 +6258,8 @@
char *new_value;
if (orig_value && *orig_value)
{
- int orig_value_len = strlen (orig_value);
- int add_len = strlen (add);
+ size_t orig_value_len = strlen (orig_value);
+ size_t add_len = strlen (add);
new_value = XMALLOC (char, add_len + orig_value_len + 1);
if (to_end)
{
@@ -4912,10 +6290,10 @@
{
char *new_value = lt_extend_str (getenv (name), value, 0);
/* some systems can't cope with a ':'-terminated path #' */
- int len = strlen (new_value);
- while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ size_t len = strlen (new_value);
+ while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
{
- new_value[len-1] = '\0';
+ new_value[--len] = '\0';
}
lt_setenv (name, new_value);
XFREE (new_value);
@@ -5082,27 +6460,47 @@
# True if ARG is an import lib, as indicated by $file_magic_cmd
func_win32_import_lib_p ()
{
- $opt_debug
+ $debug_cmd
+
case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
*import*) : ;;
*) false ;;
esac
}
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+ $debug_cmd
+
+ case " $compile_command " in
+ *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
+ suncc_use_cstd_abi=no
+ ;;
+ *)
+ suncc_use_cstd_abi=yes
+ ;;
+ esac
+}
+
# func_mode_link arg...
func_mode_link ()
{
- $opt_debug
+ $debug_cmd
+
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
# It is impossible to link a dll without this setting, and
# we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
+ # what system we are compiling for in order to pass an extra
# flag for every libtool invocation.
# allow_undefined=no
# FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
+ # to make a dll that has undefined symbols, in which case not
# even a static library is built. For now, we need to specify
# -no-undefined on the libtool link line when we can be certain
# that all symbols are satisfied, otherwise we get a static library.
@@ -5146,10 +6544,11 @@
module=no
no_install=no
objs=
+ os2dllname=
non_pic_objects=
precious_files_regex=
prefer_static_libs=no
- preload=no
+ preload=false
prev=
prevarg=
release=
@@ -5161,7 +6560,7 @@
vinfo=
vinfo_number=no
weak_libs=
- single_module="${wl}-single_module"
+ single_module=$wl-single_module
func_infer_tag $base_compile
# We need to know -static, to get the right output filenames.
@@ -5169,15 +6568,15 @@
do
case $arg in
-shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
+ test yes != "$build_libtool_libs" \
+ && func_fatal_configuration "cannot build a shared library"
build_old_libs=no
break
;;
-all-static | -static | -static-libtool-libs)
case $arg in
-all-static)
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
func_warning "complete static linking is impossible in this configuration"
fi
if test -n "$link_static_flag"; then
@@ -5210,7 +6609,7 @@
# Go through the arguments, transforming them on the way.
while test "$#" -gt 0; do
- arg="$1"
+ arg=$1
shift
func_quote_for_eval "$arg"
qarg=$func_quote_for_eval_unquoted_result
@@ -5227,21 +6626,21 @@
case $prev in
bindir)
- bindir="$arg"
+ bindir=$arg
prev=
continue
;;
dlfiles|dlprefiles)
- if test "$preload" = no; then
+ $preload || {
# Add the symbol object into the linking commands.
func_append compile_command " @SYMFILE@"
func_append finalize_command " @SYMFILE@"
- preload=yes
- fi
+ preload=:
+ }
case $arg in
*.la | *.lo) ;; # We handle these cases below.
force)
- if test "$dlself" = no; then
+ if test no = "$dlself"; then
dlself=needless
export_dynamic=yes
fi
@@ -5249,9 +6648,9 @@
continue
;;
self)
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
dlself=yes
else
dlself=needless
@@ -5261,7 +6660,7 @@
continue
;;
*)
- if test "$prev" = dlfiles; then
+ if test dlfiles = "$prev"; then
func_append dlfiles " $arg"
else
func_append dlprefiles " $arg"
@@ -5272,14 +6671,14 @@
esac
;;
expsyms)
- export_symbols="$arg"
+ export_symbols=$arg
test -f "$arg" \
- || func_fatal_error "symbol file \`$arg' does not exist"
+ || func_fatal_error "symbol file '$arg' does not exist"
prev=
continue
;;
expsyms_regex)
- export_symbols_regex="$arg"
+ export_symbols_regex=$arg
prev=
continue
;;
@@ -5297,7 +6696,13 @@
continue
;;
inst_prefix)
- inst_prefix_dir="$arg"
+ inst_prefix_dir=$arg
+ prev=
+ continue
+ ;;
+ mllvm)
+ # Clang does not use LLVM to link, so we can simply discard any
+ # '-mllvm $arg' options when doing the link step.
prev=
continue
;;
@@ -5321,21 +6726,21 @@
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
- if test "$pic_object" != none; then
+ if test none != "$pic_object"; then
# Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
+ pic_object=$xdir$pic_object
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
func_append dlfiles " $pic_object"
prev=
continue
@@ -5346,7 +6751,7 @@
fi
# CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
# Preload the old-style object.
func_append dlprefiles " $pic_object"
prev=
@@ -5354,23 +6759,23 @@
# A PIC object.
func_append libobjs " $pic_object"
- arg="$pic_object"
+ arg=$pic_object
fi
# Non-PIC object.
- if test "$non_pic_object" != none; then
+ if test none != "$non_pic_object"; then
# Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
+ non_pic_object=$xdir$non_pic_object
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
+ non_pic_object=$pic_object
func_append non_pic_objects " $non_pic_object"
fi
else
@@ -5378,7 +6783,7 @@
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
@@ -5386,24 +6791,29 @@
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
- func_fatal_error "\`$arg' is not a valid libtool object"
+ func_fatal_error "'$arg' is not a valid libtool object"
fi
fi
done
else
- func_fatal_error "link input file \`$arg' does not exist"
+ func_fatal_error "link input file '$arg' does not exist"
fi
arg=$save_arg
prev=
continue
;;
+ os2dllname)
+ os2dllname=$arg
+ prev=
+ continue
+ ;;
precious_regex)
- precious_files_regex="$arg"
+ precious_files_regex=$arg
prev=
continue
;;
release)
- release="-$arg"
+ release=-$arg
prev=
continue
;;
@@ -5415,7 +6825,7 @@
func_fatal_error "only absolute run-paths are allowed"
;;
esac
- if test "$prev" = rpath; then
+ if test rpath = "$prev"; then
case "$rpath " in
*" $arg "*) ;;
*) func_append rpath " $arg" ;;
@@ -5430,7 +6840,7 @@
continue
;;
shrext)
- shrext_cmds="$arg"
+ shrext_cmds=$arg
prev=
continue
;;
@@ -5470,7 +6880,7 @@
esac
fi # test -n "$prev"
- prevarg="$arg"
+ prevarg=$arg
case $arg in
-all-static)
@@ -5484,7 +6894,7 @@
-allow-undefined)
# FIXME: remove this flag sometime in the future.
- func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+ func_fatal_error "'-allow-undefined' must not be used because it is the default"
;;
-avoid-version)
@@ -5516,7 +6926,7 @@
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
func_fatal_error "more than one -exported-symbols argument is not allowed"
fi
- if test "X$arg" = "X-export-symbols"; then
+ if test X-export-symbols = "X$arg"; then
prev=expsyms
else
prev=expsyms_regex
@@ -5550,9 +6960,9 @@
func_stripname "-L" '' "$arg"
if test -z "$func_stripname_result"; then
if test "$#" -gt 0; then
- func_fatal_error "require no space between \`-L' and \`$1'"
+ func_fatal_error "require no space between '-L' and '$1'"
else
- func_fatal_error "need path for \`-L' option"
+ func_fatal_error "need path for '-L' option"
fi
fi
func_resolve_sysroot "$func_stripname_result"
@@ -5563,8 +6973,8 @@
*)
absdir=`cd "$dir" && pwd`
test -z "$absdir" && \
- func_fatal_error "cannot determine absolute directory name of \`$dir'"
- dir="$absdir"
+ func_fatal_error "cannot determine absolute directory name of '$dir'"
+ dir=$absdir
;;
esac
case "$deplibs " in
@@ -5599,7 +7009,7 @@
;;
-l*)
- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ if test X-lc = "X$arg" || test X-lm = "X$arg"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
# These systems don't actually have a C or math library (as such)
@@ -5607,11 +7017,11 @@
;;
*-*-os2*)
# These systems don't actually have a C library (as such)
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
# Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C and math libraries are in the System framework
@@ -5620,16 +7030,16 @@
;;
*-*-sco3.2v5* | *-*-sco5v6*)
# Causes problems with __ctype
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
*-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
# Compiler inserts libc in the correct place for threads to work
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
esac
- elif test "X$arg" = "X-lc_r"; then
+ elif test X-lc_r = "X$arg"; then
case $host in
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
@@ -5639,6 +7049,11 @@
continue
;;
+ -mllvm)
+ prev=mllvm
+ continue
+ ;;
+
-module)
module=yes
continue
@@ -5668,7 +7083,7 @@
;;
-multi_module)
- single_module="${wl}-multi_module"
+ single_module=$wl-multi_module
continue
;;
@@ -5682,8 +7097,8 @@
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
# The PATH hackery in wrapper scripts is required on Windows
# and Darwin in order for the loader to find any dlls it needs.
- func_warning "\`-no-install' is ignored for $host"
- func_warning "assuming \`-no-fast-install' instead"
+ func_warning "'-no-install' is ignored for $host"
+ func_warning "assuming '-no-fast-install' instead"
fast_install=no
;;
*) no_install=yes ;;
@@ -5701,6 +7116,11 @@
continue
;;
+ -os2dllname)
+ prev=os2dllname
+ continue
+ ;;
+
-o) prev=output ;;
-precious-files-regex)
@@ -5788,14 +7208,14 @@
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
arg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for flag in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_quote_for_eval "$flag"
func_append arg " $func_quote_for_eval_result"
func_append compiler_flags " $func_quote_for_eval_result"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
@@ -5804,15 +7224,15 @@
func_stripname '-Wl,' '' "$arg"
args=$func_stripname_result
arg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for flag in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_quote_for_eval "$flag"
func_append arg " $wl$func_quote_for_eval_result"
func_append compiler_flags " $wl$func_quote_for_eval_result"
func_append linker_flags " $func_quote_for_eval_result"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
@@ -5835,7 +7255,7 @@
# -msg_* for osf cc
-msg_*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
# Flags to be passed through unchanged, with rationale:
@@ -5847,25 +7267,46 @@
# -m*, -t[45]*, -txscale* architecture-specific flags for GCC
# -F/path path to uninstalled frameworks, gcc on darwin
# -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # -fstack-protector* stack protector flags for GCC
# @file GCC response files
# -tp=* Portland pgcc target processor selection
# --sysroot=* for sysroot support
- # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ # -stdlib=* select c++ std lib with clang
-64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
- -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+ -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
func_append compile_command " $arg"
func_append finalize_command " $arg"
func_append compiler_flags " $arg"
continue
;;
+ -Z*)
+ if test os2 = "`expr $host : '.*\(os2\)'`"; then
+ # OS/2 uses -Zxxx to specify OS/2-specific options
+ compiler_flags="$compiler_flags $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case $arg in
+ -Zlinker | -Zstack)
+ prev=xcompiler
+ ;;
+ esac
+ continue
+ else
+ # Otherwise treat like 'Some other compiler flag' below
+ func_quote_for_eval "$arg"
+ arg=$func_quote_for_eval_result
+ fi
+ ;;
+
# Some other compiler flag.
-* | +*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
*.$objext)
@@ -5886,21 +7327,21 @@
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
- if test "$pic_object" != none; then
+ test none = "$pic_object" || {
# Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
+ pic_object=$xdir$pic_object
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
func_append dlfiles " $pic_object"
prev=
continue
@@ -5911,7 +7352,7 @@
fi
# CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
# Preload the old-style object.
func_append dlprefiles " $pic_object"
prev=
@@ -5919,23 +7360,23 @@
# A PIC object.
func_append libobjs " $pic_object"
- arg="$pic_object"
- fi
+ arg=$pic_object
+ }
# Non-PIC object.
- if test "$non_pic_object" != none; then
+ if test none != "$non_pic_object"; then
# Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
+ non_pic_object=$xdir$non_pic_object
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
+ non_pic_object=$pic_object
func_append non_pic_objects " $non_pic_object"
fi
else
@@ -5943,7 +7384,7 @@
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
@@ -5951,7 +7392,7 @@
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
- func_fatal_error "\`$arg' is not a valid libtool object"
+ func_fatal_error "'$arg' is not a valid libtool object"
fi
fi
;;
@@ -5967,11 +7408,11 @@
# A libtool-controlled library.
func_resolve_sysroot "$arg"
- if test "$prev" = dlfiles; then
+ if test dlfiles = "$prev"; then
# This library was specified with -dlopen.
func_append dlfiles " $func_resolve_sysroot_result"
prev=
- elif test "$prev" = dlprefiles; then
+ elif test dlprefiles = "$prev"; then
# The library was specified with -dlpreopen.
func_append dlprefiles " $func_resolve_sysroot_result"
prev=
@@ -5986,7 +7427,7 @@
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
esac # arg
@@ -5998,9 +7439,9 @@
done # argument parsing loop
test -n "$prev" && \
- func_fatal_help "the \`$prevarg' option requires an argument"
+ func_fatal_help "the '$prevarg' option requires an argument"
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
eval arg=\"$export_dynamic_flag_spec\"
func_append compile_command " $arg"
func_append finalize_command " $arg"
@@ -6009,20 +7450,23 @@
oldlibs=
# calculate the name of the file, without its directory
func_basename "$output"
- outputname="$func_basename_result"
- libobjs_save="$libobjs"
+ outputname=$func_basename_result
+ libobjs_save=$libobjs
if test -n "$shlibpath_var"; then
# get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+ eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
else
shlib_search_path=
fi
eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+ # Definition is injected by LT_CONFIG during libtool generation.
+ func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
func_dirname "$output" "/" ""
- output_objdir="$func_dirname_result$objdir"
+ output_objdir=$func_dirname_result$objdir
func_to_tool_file "$output_objdir/"
tool_output_objdir=$func_to_tool_file_result
# Create the object directory.
@@ -6045,7 +7489,7 @@
# Find all interdependent deplibs by searching for libraries
# that are linked more than once (e.g. -la -lb -la)
for deplib in $deplibs; do
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
@@ -6053,7 +7497,7 @@
func_append libs " $deplib"
done
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
libs="$predeps $libs $compiler_lib_search_path $postdeps"
# Compute libraries that are listed more than once in $predeps
@@ -6085,7 +7529,7 @@
case $file in
*.la) ;;
*)
- func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+ func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
;;
esac
done
@@ -6093,7 +7537,7 @@
prog)
compile_deplibs=
finalize_deplibs=
- alldeplibs=no
+ alldeplibs=false
newdlfiles=
newdlprefiles=
passes="conv scan dlopen dlpreopen link"
@@ -6105,29 +7549,29 @@
for pass in $passes; do
# The preopen pass in lib mode reverses $deplibs; put it back here
# so that -L comes before libs that need it for instance...
- if test "$linkmode,$pass" = "lib,link"; then
+ if test lib,link = "$linkmode,$pass"; then
## FIXME: Find the place where the list is rebuilt in the wrong
## order, and fix it there properly
tmp_deplibs=
for deplib in $deplibs; do
tmp_deplibs="$deplib $tmp_deplibs"
done
- deplibs="$tmp_deplibs"
+ deplibs=$tmp_deplibs
fi
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan"; then
- libs="$deplibs"
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass"; then
+ libs=$deplibs
deplibs=
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
case $pass in
- dlopen) libs="$dlfiles" ;;
- dlpreopen) libs="$dlprefiles" ;;
+ dlopen) libs=$dlfiles ;;
+ dlpreopen) libs=$dlprefiles ;;
link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
esac
fi
- if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ if test lib,dlpreopen = "$linkmode,$pass"; then
# Collect and forward deplibs of preopened libtool libs
for lib in $dlprefiles; do
# Ignore non-libtool-libs
@@ -6148,26 +7592,26 @@
esac
done
done
- libs="$dlprefiles"
+ libs=$dlprefiles
fi
- if test "$pass" = dlopen; then
+ if test dlopen = "$pass"; then
# Collect dlpreopened libraries
- save_deplibs="$deplibs"
+ save_deplibs=$deplibs
deplibs=
fi
for deplib in $libs; do
lib=
- found=no
+ found=false
case $deplib in
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
|-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
func_append compiler_flags " $deplib"
- if test "$linkmode" = lib ; then
+ if test lib = "$linkmode"; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) func_append new_inherited_linker_flags " $deplib" ;;
@@ -6177,13 +7621,13 @@
continue
;;
-l*)
- if test "$linkmode" != lib && test "$linkmode" != prog; then
- func_warning "\`-l' is ignored for archives/objects"
+ if test lib != "$linkmode" && test prog != "$linkmode"; then
+ func_warning "'-l' is ignored for archives/objects"
continue
fi
func_stripname '-l' '' "$deplib"
name=$func_stripname_result
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
else
searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
@@ -6191,31 +7635,22 @@
for searchdir in $searchdirs; do
for search_ext in .la $std_shrext .so .a; do
# Search the libtool library
- lib="$searchdir/lib${name}${search_ext}"
+ lib=$searchdir/lib$name$search_ext
if test -f "$lib"; then
- if test "$search_ext" = ".la"; then
- found=yes
+ if test .la = "$search_ext"; then
+ found=:
else
- found=no
+ found=false
fi
break 2
fi
done
done
- if test "$found" != yes; then
- # deplib doesn't seem to be a libtool library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- else # deplib is a libtool library
+ if $found; then
+ # deplib is a libtool library
# If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
# We need to do some special things here, and not later.
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $deplib "*)
if func_lalib_p "$lib"; then
@@ -6223,19 +7658,19 @@
old_library=
func_source "$lib"
for l in $old_library $library_names; do
- ll="$l"
+ ll=$l
done
- if test "X$ll" = "X$old_library" ; then # only static version available
- found=no
+ if test "X$ll" = "X$old_library"; then # only static version available
+ found=false
func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
+ ladir=$func_dirname_result
lib=$ladir/$old_library
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
fi
continue
fi
@@ -6244,15 +7679,25 @@
*) ;;
esac
fi
+ else
+ # deplib doesn't seem to be a libtool library
+ if test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
fi
;; # -l
*.ltframework)
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
- if test "$linkmode" = lib ; then
+ if test lib = "$linkmode"; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) func_append new_inherited_linker_flags " $deplib" ;;
@@ -6265,18 +7710,18 @@
case $linkmode in
lib)
deplibs="$deplib $deplibs"
- test "$pass" = conv && continue
+ test conv = "$pass" && continue
newdependency_libs="$deplib $newdependency_libs"
func_stripname '-L' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
prog)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
continue
fi
- if test "$pass" = scan; then
+ if test scan = "$pass"; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
@@ -6287,13 +7732,13 @@
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
*)
- func_warning "\`-L' is ignored for archives/objects"
+ func_warning "'-L' is ignored for archives/objects"
;;
esac # linkmode
continue
;; # -L
-R*)
- if test "$pass" = link; then
+ if test link = "$pass"; then
func_stripname '-R' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
dir=$func_resolve_sysroot_result
@@ -6311,7 +7756,7 @@
lib=$func_resolve_sysroot_result
;;
*.$libext)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
continue
fi
@@ -6322,21 +7767,26 @@
case " $dlpreconveniencelibs " in
*" $deplib "*) ;;
*)
- valid_a_lib=no
+ valid_a_lib=false
case $deplibs_check_method in
match_pattern*)
set dummy $deplibs_check_method; shift
match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
| $EGREP "$match_pattern_regex" > /dev/null; then
- valid_a_lib=yes
+ valid_a_lib=:
fi
;;
pass_all)
- valid_a_lib=yes
+ valid_a_lib=:
;;
esac
- if test "$valid_a_lib" != yes; then
+ if $valid_a_lib; then
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ else
echo
$ECHO "*** Warning: Trying to link with static lib archive $deplib."
echo "*** I have the capability to make that library automatically link in when"
@@ -6344,18 +7794,13 @@
echo "*** shared version of the library, which you do not appear to have"
echo "*** because the file extensions .$libext of this argument makes me believe"
echo "*** that it is just a static archive that I should not use here."
- else
- echo
- $ECHO "*** Warning: Linking the shared library $output against the"
- $ECHO "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
fi
;;
esac
continue
;;
prog)
- if test "$pass" != link; then
+ if test link != "$pass"; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
@@ -6366,10 +7811,10 @@
esac # linkmode
;; # *.$libext
*.lo | *.$objext)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
- elif test "$linkmode" = prog; then
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ elif test prog = "$linkmode"; then
+ if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
func_append newdlprefiles " $deplib"
@@ -6382,22 +7827,20 @@
continue
;;
%DEPLIBS%)
- alldeplibs=yes
+ alldeplibs=:
continue
;;
esac # case $deplib
- if test "$found" = yes || test -f "$lib"; then :
- else
- func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
- fi
+ $found || test -f "$lib" \
+ || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$lib" \
- || func_fatal_error "\`$lib' is not a valid libtool archive"
+ || func_fatal_error "'$lib' is not a valid libtool archive"
func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
+ ladir=$func_dirname_result
dlname=
dlopen=
@@ -6427,30 +7870,30 @@
done
fi
dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass" ||
+ { test prog != "$linkmode" && test lib != "$linkmode"; }; then
test -n "$dlopen" && func_append dlfiles " $dlopen"
test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
fi
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
# Only check for convenience libraries
deplibs="$lib $deplibs"
if test -z "$libdir"; then
if test -z "$old_library"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
+ func_fatal_error "cannot find name of link library for '$lib'"
fi
# It is a libtool convenience library, so add in its objects.
func_append convenience " $ladir/$objdir/$old_library"
func_append old_convenience " $ladir/$objdir/$old_library"
- elif test "$linkmode" != prog && test "$linkmode" != lib; then
- func_fatal_error "\`$lib' is not a convenience library"
+ elif test prog != "$linkmode" && test lib != "$linkmode"; then
+ func_fatal_error "'$lib' is not a convenience library"
fi
tmp_libs=
for deplib in $dependency_libs; do
deplibs="$deplib $deplibs"
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
@@ -6464,26 +7907,26 @@
# Get the name of the library we link against.
linklib=
if test -n "$old_library" &&
- { test "$prefer_static_libs" = yes ||
- test "$prefer_static_libs,$installed" = "built,no"; }; then
+ { test yes = "$prefer_static_libs" ||
+ test built,no = "$prefer_static_libs,$installed"; }; then
linklib=$old_library
else
for l in $old_library $library_names; do
- linklib="$l"
+ linklib=$l
done
fi
if test -z "$linklib"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
+ func_fatal_error "cannot find name of link library for '$lib'"
fi
# This library was specified with -dlopen.
- if test "$pass" = dlopen; then
- if test -z "$libdir"; then
- func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
- fi
+ if test dlopen = "$pass"; then
+ test -z "$libdir" \
+ && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
if test -z "$dlname" ||
- test "$dlopen_support" != yes ||
- test "$build_libtool_libs" = no; then
+ test yes != "$dlopen_support" ||
+ test no = "$build_libtool_libs"
+ then
# If there is no dlname, no dlopen support or we're linking
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
@@ -6497,40 +7940,40 @@
# We need an absolute path.
case $ladir in
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
*)
abs_ladir=`cd "$ladir" && pwd`
if test -z "$abs_ladir"; then
- func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "cannot determine absolute directory name of '$ladir'"
func_warning "passing it literally to the linker, although it might fail"
- abs_ladir="$ladir"
+ abs_ladir=$ladir
fi
;;
esac
func_basename "$lib"
- laname="$func_basename_result"
+ laname=$func_basename_result
# Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
+ if test yes = "$installed"; then
if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- func_warning "library \`$lib' was moved."
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
+ func_warning "library '$lib' was moved."
+ dir=$ladir
+ absdir=$abs_ladir
+ libdir=$abs_ladir
else
- dir="$lt_sysroot$libdir"
- absdir="$lt_sysroot$libdir"
+ dir=$lt_sysroot$libdir
+ absdir=$lt_sysroot$libdir
fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ test yes = "$hardcode_automatic" && avoidtemprpath=yes
else
if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- dir="$ladir"
- absdir="$abs_ladir"
+ dir=$ladir
+ absdir=$abs_ladir
# Remove this search path later
func_append notinst_path " $abs_ladir"
else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
+ dir=$ladir/$objdir
+ absdir=$abs_ladir/$objdir
# Remove this search path later
func_append notinst_path " $abs_ladir"
fi
@@ -6539,11 +7982,11 @@
name=$func_stripname_result
# This library was specified with -dlpreopen.
- if test "$pass" = dlpreopen; then
- if test -z "$libdir" && test "$linkmode" = prog; then
- func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ if test dlpreopen = "$pass"; then
+ if test -z "$libdir" && test prog = "$linkmode"; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
fi
- case "$host" in
+ case $host in
# special handling for platforms with PE-DLLs.
*cygwin* | *mingw* | *cegcc* )
# Linker will automatically link against shared library if both
@@ -6587,9 +8030,9 @@
if test -z "$libdir"; then
# Link the convenience library
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
+ elif test prog,link = "$linkmode,$pass"; then
compile_deplibs="$dir/$old_library $compile_deplibs"
finalize_deplibs="$dir/$old_library $finalize_deplibs"
else
@@ -6599,14 +8042,14 @@
fi
- if test "$linkmode" = prog && test "$pass" != link; then
+ if test prog = "$linkmode" && test link != "$pass"; then
func_append newlib_search_path " $ladir"
deplibs="$lib $deplibs"
- linkalldeplibs=no
- if test "$link_all_deplibs" != no || test -z "$library_names" ||
- test "$build_libtool_libs" = no; then
- linkalldeplibs=yes
+ linkalldeplibs=false
+ if test no != "$link_all_deplibs" || test -z "$library_names" ||
+ test no = "$build_libtool_libs"; then
+ linkalldeplibs=:
fi
tmp_libs=
@@ -6618,14 +8061,14 @@
;;
esac
# Need to link against all dependency_libs?
- if test "$linkalldeplibs" = yes; then
+ if $linkalldeplibs; then
deplibs="$deplib $deplibs"
else
# Need to hardcode shared library paths
# or/and link against static libraries
newdependency_libs="$deplib $newdependency_libs"
fi
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
@@ -6635,15 +8078,15 @@
continue
fi # $linkmode = prog...
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
if test -n "$library_names" &&
- { { test "$prefer_static_libs" = no ||
- test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ { { test no = "$prefer_static_libs" ||
+ test built,yes = "$prefer_static_libs,$installed"; } ||
test -z "$old_library"; }; then
# We need to hardcode the library path
- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
# Make sure the rpath contains only unique directories.
- case "$temp_rpath:" in
+ case $temp_rpath: in
*"$absdir:"*) ;;
*) func_append temp_rpath "$absdir:" ;;
esac
@@ -6672,9 +8115,9 @@
esac
fi # $linkmode,$pass = prog,link...
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
+ if $alldeplibs &&
+ { test pass_all = "$deplibs_check_method" ||
+ { test yes = "$build_libtool_libs" &&
test -n "$library_names"; }; }; then
# We only need to search for static libraries
continue
@@ -6683,19 +8126,19 @@
link_static=no # Whether the deplib will be linked statically
use_static_libs=$prefer_static_libs
- if test "$use_static_libs" = built && test "$installed" = yes; then
+ if test built = "$use_static_libs" && test yes = "$installed"; then
use_static_libs=no
fi
if test -n "$library_names" &&
- { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ { test no = "$use_static_libs" || test -z "$old_library"; }; then
case $host in
- *cygwin* | *mingw* | *cegcc*)
+ *cygwin* | *mingw* | *cegcc* | *os2*)
# No point in relinking DLLs because paths are not encoded
func_append notinst_deplibs " $lib"
need_relink=no
;;
*)
- if test "$installed" = no; then
+ if test no = "$installed"; then
func_append notinst_deplibs " $lib"
need_relink=yes
fi
@@ -6705,24 +8148,24 @@
# Warn about portability, can't link against -module's on some
# systems (darwin). Don't bleat about dlopened modules though!
- dlopenmodule=""
+ dlopenmodule=
for dlpremoduletest in $dlprefiles; do
if test "X$dlpremoduletest" = "X$lib"; then
- dlopenmodule="$dlpremoduletest"
+ dlopenmodule=$dlpremoduletest
break
fi
done
- if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
echo
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
$ECHO "*** Warning: Linking the executable $output against the loadable module"
else
$ECHO "*** Warning: Linking the shared library $output against the loadable module"
fi
$ECHO "*** $linklib is not portable!"
fi
- if test "$linkmode" = lib &&
- test "$hardcode_into_libs" = yes; then
+ if test lib = "$linkmode" &&
+ test yes = "$hardcode_into_libs"; then
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
@@ -6750,43 +8193,43 @@
# figure out the soname
set dummy $library_names
shift
- realname="$1"
+ realname=$1
shift
libname=`eval "\\$ECHO \"$libname_spec\""`
# use dlname if we got it. it's perfectly good, no?
if test -n "$dlname"; then
- soname="$dlname"
+ soname=$dlname
elif test -n "$soname_spec"; then
# bleh windows
case $host in
- *cygwin* | mingw* | *cegcc*)
+ *cygwin* | mingw* | *cegcc* | *os2*)
func_arith $current - $age
major=$func_arith_result
- versuffix="-$major"
+ versuffix=-$major
;;
esac
eval soname=\"$soname_spec\"
else
- soname="$realname"
+ soname=$realname
fi
# Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
+ soroot=$soname
func_basename "$soroot"
- soname="$func_basename_result"
+ soname=$func_basename_result
func_stripname 'lib' '.dll' "$soname"
newlib=libimp-$func_stripname_result.a
# If the library has no export list, then create one now
if test -f "$output_objdir/$soname-def"; then :
else
- func_verbose "extracting exported symbol list from \`$soname'"
+ func_verbose "extracting exported symbol list from '$soname'"
func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
fi
# Create $newlib
if test -f "$output_objdir/$newlib"; then :; else
- func_verbose "generating import library for \`$soname'"
+ func_verbose "generating import library for '$soname'"
func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
fi
# make sure the library variables are pointing to the new library
@@ -6794,58 +8237,58 @@
linklib=$newlib
fi # test -n "$old_archive_from_expsyms_cmds"
- if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ if test prog = "$linkmode" || test relink != "$opt_mode"; then
add_shlibpath=
add_dir=
add=
lib_linked=yes
case $hardcode_action in
immediate | unsupported)
- if test "$hardcode_direct" = no; then
- add="$dir/$linklib"
+ if test no = "$hardcode_direct"; then
+ add=$dir/$linklib
case $host in
- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
- *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
+ *-*-sysv4*uw2*) add_dir=-L$dir ;;
*-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
- *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-unixware7*) add_dir=-L$dir ;;
*-*-darwin* )
- # if the lib is a (non-dlopened) module then we can not
+ # if the lib is a (non-dlopened) module then we cannot
# link against it, someone is ignoring the earlier warnings
if /usr/bin/file -L $add 2> /dev/null |
- $GREP ": [^:]* bundle" >/dev/null ; then
+ $GREP ": [^:]* bundle" >/dev/null; then
if test "X$dlopenmodule" != "X$lib"; then
$ECHO "*** Warning: lib $linklib is a module, not a shared library"
- if test -z "$old_library" ; then
+ if test -z "$old_library"; then
echo
echo "*** And there doesn't seem to be a static archive available"
echo "*** The link will probably fail, sorry"
else
- add="$dir/$old_library"
+ add=$dir/$old_library
fi
elif test -n "$old_library"; then
- add="$dir/$old_library"
+ add=$dir/$old_library
fi
fi
esac
- elif test "$hardcode_minus_L" = no; then
+ elif test no = "$hardcode_minus_L"; then
case $host in
- *-*-sunos*) add_shlibpath="$dir" ;;
+ *-*-sunos*) add_shlibpath=$dir ;;
esac
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- add_shlibpath="$dir"
- add="-l$name"
+ add_dir=-L$dir
+ add=-l$name
+ elif test no = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
else
lib_linked=no
fi
;;
relink)
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$absdir"
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$dir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$absdir
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
@@ -6854,10 +8297,10 @@
;;
esac
fi
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
- add="-l$name"
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
else
lib_linked=no
fi
@@ -6865,7 +8308,7 @@
*) lib_linked=no ;;
esac
- if test "$lib_linked" != yes; then
+ if test yes != "$lib_linked"; then
func_fatal_configuration "unsupported hardcode properties"
fi
@@ -6875,15 +8318,15 @@
*) func_append compile_shlibpath "$add_shlibpath:" ;;
esac
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
test -n "$add" && compile_deplibs="$add $compile_deplibs"
else
test -n "$add_dir" && deplibs="$add_dir $deplibs"
test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes &&
- test "$hardcode_minus_L" != yes &&
- test "$hardcode_shlibpath_var" = yes; then
+ if test yes != "$hardcode_direct" &&
+ test yes != "$hardcode_minus_L" &&
+ test yes = "$hardcode_shlibpath_var"; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) func_append finalize_shlibpath "$libdir:" ;;
@@ -6892,33 +8335,33 @@
fi
fi
- if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ if test prog = "$linkmode" || test relink = "$opt_mode"; then
add_shlibpath=
add_dir=
add=
# Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$libdir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$libdir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$libdir
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) func_append finalize_shlibpath "$libdir:" ;;
esac
- add="-l$name"
- elif test "$hardcode_automatic" = yes; then
+ add=-l$name
+ elif test yes = "$hardcode_automatic"; then
if test -n "$inst_prefix_dir" &&
- test -f "$inst_prefix_dir$libdir/$linklib" ; then
- add="$inst_prefix_dir$libdir/$linklib"
+ test -f "$inst_prefix_dir$libdir/$linklib"; then
+ add=$inst_prefix_dir$libdir/$linklib
else
- add="$libdir/$linklib"
+ add=$libdir/$linklib
fi
else
# We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
+ add_dir=-L$libdir
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
@@ -6927,10 +8370,10 @@
;;
esac
fi
- add="-l$name"
+ add=-l$name
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
else
@@ -6938,43 +8381,43 @@
test -n "$add" && deplibs="$add $deplibs"
fi
fi
- elif test "$linkmode" = prog; then
+ elif test prog = "$linkmode"; then
# Here we assume that one of hardcode_direct or hardcode_minus_L
# is not unsupported. This is valid on all known static and
# shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
+ if test unsupported != "$hardcode_direct"; then
+ test -n "$old_library" && linklib=$old_library
compile_deplibs="$dir/$linklib $compile_deplibs"
finalize_deplibs="$dir/$linklib $finalize_deplibs"
else
compile_deplibs="-l$name -L$dir $compile_deplibs"
finalize_deplibs="-l$name -L$dir $finalize_deplibs"
fi
- elif test "$build_libtool_libs" = yes; then
+ elif test yes = "$build_libtool_libs"; then
# Not a shared library
- if test "$deplibs_check_method" != pass_all; then
+ if test pass_all != "$deplibs_check_method"; then
# We're trying link a shared library against a static one
# but the system doesn't support it.
# Just print a warning and add the library to dependency_libs so
# that the program can be linked against the static library.
echo
- $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ $ECHO "*** Warning: This system cannot link to static lib archive $lib."
echo "*** I have the capability to make that library automatically link in when"
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have."
- if test "$module" = yes; then
+ if test yes = "$module"; then
echo "*** But as you try to build a module library, libtool will still create "
echo "*** a static module, that should work as long as the dlopening application"
echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
if test -z "$global_symbol_pipe"; then
echo
echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
fi
- if test "$build_old_libs" = no; then
+ if test no = "$build_old_libs"; then
build_libtool_libs=module
build_old_libs=yes
else
@@ -6987,11 +8430,11 @@
fi
fi # link shared/static library?
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes ||
- test "$build_old_libs" = yes ||
- test "$link_static" = yes; }; then
+ { test yes != "$hardcode_into_libs" ||
+ test yes = "$build_old_libs" ||
+ test yes = "$link_static"; }; then
# Extract -R from dependency_libs
temp_deplibs=
for libdir in $dependency_libs; do
@@ -7005,12 +8448,12 @@
*) func_append temp_deplibs " $libdir";;
esac
done
- dependency_libs="$temp_deplibs"
+ dependency_libs=$temp_deplibs
fi
func_append newlib_search_path " $absdir"
# Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
# ... and its dependency_libs
tmp_libs=
for deplib in $dependency_libs; do
@@ -7020,7 +8463,7 @@
func_resolve_sysroot "$func_stripname_result";;
*) func_resolve_sysroot "$deplib" ;;
esac
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $func_resolve_sysroot_result "*)
func_append specialdeplibs " $func_resolve_sysroot_result" ;;
@@ -7029,12 +8472,12 @@
func_append tmp_libs " $func_resolve_sysroot_result"
done
- if test "$link_all_deplibs" != no; then
+ if test no != "$link_all_deplibs"; then
# Add the search paths of all dependency libraries
for deplib in $dependency_libs; do
path=
case $deplib in
- -L*) path="$deplib" ;;
+ -L*) path=$deplib ;;
*.la)
func_resolve_sysroot "$deplib"
deplib=$func_resolve_sysroot_result
@@ -7042,12 +8485,12 @@
dir=$func_dirname_result
# We need an absolute path.
case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
*)
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
- func_warning "cannot determine absolute directory name of \`$dir'"
- absdir="$dir"
+ func_warning "cannot determine absolute directory name of '$dir'"
+ absdir=$dir
fi
;;
esac
@@ -7055,35 +8498,35 @@
case $host in
*-*-darwin*)
depdepl=
- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
- if test -n "$deplibrary_names" ; then
- for tmp in $deplibrary_names ; do
+ eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names"; then
+ for tmp in $deplibrary_names; do
depdepl=$tmp
done
- if test -f "$absdir/$objdir/$depdepl" ; then
- depdepl="$absdir/$objdir/$depdepl"
- darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -f "$absdir/$objdir/$depdepl"; then
+ depdepl=$absdir/$objdir/$depdepl
+ darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
if test -z "$darwin_install_name"; then
- darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
fi
- func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
- func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
+ func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
path=
fi
fi
;;
*)
- path="-L$absdir/$objdir"
+ path=-L$absdir/$objdir
;;
esac
else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_fatal_error "'$deplib' is not a valid libtool archive"
test "$absdir" != "$libdir" && \
- func_warning "\`$deplib' seems to be moved"
+ func_warning "'$deplib' seems to be moved"
- path="-L$absdir"
+ path=-L$absdir
fi
;;
esac
@@ -7095,23 +8538,23 @@
fi # link_all_deplibs != no
fi # linkmode = lib
done # for deplib in $libs
- if test "$pass" = link; then
- if test "$linkmode" = "prog"; then
+ if test link = "$pass"; then
+ if test prog = "$linkmode"; then
compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
else
compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
fi
fi
- dependency_libs="$newdependency_libs"
- if test "$pass" = dlpreopen; then
+ dependency_libs=$newdependency_libs
+ if test dlpreopen = "$pass"; then
# Link the dlpreopened libraries before other libraries
for deplib in $save_deplibs; do
deplibs="$deplib $deplibs"
done
fi
- if test "$pass" != dlopen; then
- if test "$pass" != conv; then
+ if test dlopen != "$pass"; then
+ test conv = "$pass" || {
# Make sure lib_search_path contains only unique directories.
lib_search_path=
for dir in $newlib_search_path; do
@@ -7121,12 +8564,12 @@
esac
done
newlib_search_path=
- fi
+ }
- if test "$linkmode,$pass" != "prog,link"; then
- vars="deplibs"
- else
+ if test prog,link = "$linkmode,$pass"; then
vars="compile_deplibs finalize_deplibs"
+ else
+ vars=deplibs
fi
for var in $vars dependency_libs; do
# Add libraries to $var in reverse order
@@ -7184,62 +8627,93 @@
eval $var=\"$tmp_libs\"
done # for var
fi
+
+ # Add Sun CC postdeps if required:
+ test CXX = "$tagname" && {
+ case $host_os in
+ linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C++ 5.9
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ func_cc_basename "$CC"
+ case $func_cc_basename_result in
+ CC* | sunCC*)
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ }
+
# Last step: remove runtime libs from dependency_libs
# (they stay in deplibs)
tmp_libs=
- for i in $dependency_libs ; do
+ for i in $dependency_libs; do
case " $predeps $postdeps $compiler_lib_search_path " in
*" $i "*)
- i=""
+ i=
;;
esac
- if test -n "$i" ; then
+ if test -n "$i"; then
func_append tmp_libs " $i"
fi
done
dependency_libs=$tmp_libs
done # for pass
- if test "$linkmode" = prog; then
- dlfiles="$newdlfiles"
+ if test prog = "$linkmode"; then
+ dlfiles=$newdlfiles
fi
- if test "$linkmode" = prog || test "$linkmode" = lib; then
- dlprefiles="$newdlprefiles"
+ if test prog = "$linkmode" || test lib = "$linkmode"; then
+ dlprefiles=$newdlprefiles
fi
case $linkmode in
oldlib)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for archives"
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for archives"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ func_warning "'-l' and '-L' are ignored for archives" ;;
esac
test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for archives"
+ func_warning "'-rpath' is ignored for archives"
test -n "$xrpath" && \
- func_warning "\`-R' is ignored for archives"
+ func_warning "'-R' is ignored for archives"
test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for archives"
+ func_warning "'-version-info/-version-number' is ignored for archives"
test -n "$release" && \
- func_warning "\`-release' is ignored for archives"
+ func_warning "'-release' is ignored for archives"
test -n "$export_symbols$export_symbols_regex" && \
- func_warning "\`-export-symbols' is ignored for archives"
+ func_warning "'-export-symbols' is ignored for archives"
# Now set the variables for building old libraries.
build_libtool_libs=no
- oldlibs="$output"
+ oldlibs=$output
func_append objs "$old_deplibs"
;;
lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
+ # Make sure we only generate libraries of the form 'libNAME.la'.
case $outputname in
lib*)
func_stripname 'lib' '.la' "$outputname"
@@ -7248,10 +8722,10 @@
eval libname=\"$libname_spec\"
;;
*)
- test "$module" = no && \
- func_fatal_help "libtool library \`$output' must begin with \`lib'"
+ test no = "$module" \
+ && func_fatal_help "libtool library '$output' must begin with 'lib'"
- if test "$need_lib_prefix" != no; then
+ if test no != "$need_lib_prefix"; then
# Add the "lib" prefix for modules if required
func_stripname '' '.la' "$outputname"
name=$func_stripname_result
@@ -7265,8 +8739,8 @@
esac
if test -n "$objs"; then
- if test "$deplibs_check_method" != pass_all; then
- func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ if test pass_all != "$deplibs_check_method"; then
+ func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
else
echo
$ECHO "*** Warning: Linking the shared library $output against the non-libtool"
@@ -7275,21 +8749,21 @@
fi
fi
- test "$dlself" != no && \
- func_warning "\`-dlopen self' is ignored for libtool libraries"
+ test no = "$dlself" \
+ || func_warning "'-dlopen self' is ignored for libtool libraries"
set dummy $rpath
shift
- test "$#" -gt 1 && \
- func_warning "ignoring multiple \`-rpath's for a libtool library"
+ test 1 -lt "$#" \
+ && func_warning "ignoring multiple '-rpath's for a libtool library"
- install_libdir="$1"
+ install_libdir=$1
oldlibs=
if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
# Building a libtool convenience library.
- # Some compilers have problems with a `.al' extension so
+ # Some compilers have problems with a '.al' extension so
# convenience libraries should have the same extension an
# archive normally would.
oldlibs="$output_objdir/$libname.$libext $oldlibs"
@@ -7298,20 +8772,20 @@
fi
test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+ func_warning "'-version-info/-version-number' is ignored for convenience libraries"
test -n "$release" && \
- func_warning "\`-release' is ignored for convenience libraries"
+ func_warning "'-release' is ignored for convenience libraries"
else
# Parse the version information argument.
- save_ifs="$IFS"; IFS=':'
+ save_ifs=$IFS; IFS=:
set dummy $vinfo 0 0 0
shift
- IFS="$save_ifs"
+ IFS=$save_ifs
test -n "$7" && \
- func_fatal_help "too many parameters to \`-version-info'"
+ func_fatal_help "too many parameters to '-version-info'"
# convert absolute version numbers to libtool ages
# this retains compatibility with .la files and attempts
@@ -7319,42 +8793,42 @@
case $vinfo_number in
yes)
- number_major="$1"
- number_minor="$2"
- number_revision="$3"
+ number_major=$1
+ number_minor=$2
+ number_revision=$3
#
# There are really only two kinds -- those that
# use the current revision as the major version
# and those that subtract age and use age as
# a minor version. But, then there is irix
- # which has an extra 1 added just for fun
+ # that has an extra 1 added just for fun
#
case $version_type in
# correct linux to gnu/linux during the next big refactor
- darwin|linux|osf|windows|none)
+ darwin|freebsd-elf|linux|osf|windows|none)
func_arith $number_major + $number_minor
current=$func_arith_result
- age="$number_minor"
- revision="$number_revision"
+ age=$number_minor
+ revision=$number_revision
;;
- freebsd-aout|freebsd-elf|qnx|sunos)
- current="$number_major"
- revision="$number_minor"
- age="0"
+ freebsd-aout|qnx|sunos)
+ current=$number_major
+ revision=$number_minor
+ age=0
;;
irix|nonstopux)
func_arith $number_major + $number_minor
current=$func_arith_result
- age="$number_minor"
- revision="$number_minor"
+ age=$number_minor
+ revision=$number_minor
lt_irix_increment=no
;;
esac
;;
no)
- current="$1"
- revision="$2"
- age="$3"
+ current=$1
+ revision=$2
+ age=$3
;;
esac
@@ -7362,30 +8836,30 @@
case $current in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "CURRENT \`$current' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "CURRENT '$current' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
case $revision in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "REVISION \`$revision' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "REVISION '$revision' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
case $age in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "AGE \`$age' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "AGE '$age' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
if test "$age" -gt "$current"; then
- func_error "AGE \`$age' is greater than the current interface number \`$current'"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "AGE '$age' is greater than the current interface number '$current'"
+ func_fatal_error "'$vinfo' is not valid version information"
fi
# Calculate the version variables.
@@ -7400,26 +8874,36 @@
# verstring for coding it into the library header
func_arith $current - $age
major=.$func_arith_result
- versuffix="$major.$age.$revision"
+ versuffix=$major.$age.$revision
# Darwin ld doesn't like 0 for these options...
func_arith $current + 1
minor_current=$func_arith_result
- xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ # On Darwin other compilers
+ case $CC in
+ nagfor*)
+ verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+ ;;
+ *)
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+ esac
;;
freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
+ major=.$current
+ versuffix=.$current.$revision
;;
freebsd-elf)
- major=".$current"
- versuffix=".$current"
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=$major.$age.$revision
;;
irix | nonstopux)
- if test "X$lt_irix_increment" = "Xno"; then
+ if test no = "$lt_irix_increment"; then
func_arith $current - $age
else
func_arith $current - $age + 1
@@ -7430,69 +8914,74 @@
nonstopux) verstring_prefix=nonstopux ;;
*) verstring_prefix=sgi ;;
esac
- verstring="$verstring_prefix$major.$revision"
+ verstring=$verstring_prefix$major.$revision
# Add in all the interfaces that we are compatible with.
loop=$revision
- while test "$loop" -ne 0; do
+ while test 0 -ne "$loop"; do
func_arith $revision - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
- verstring="$verstring_prefix$major.$iface:$verstring"
+ verstring=$verstring_prefix$major.$iface:$verstring
done
- # Before this point, $major must not contain `.'.
+ # Before this point, $major must not contain '.'.
major=.$major
- versuffix="$major.$revision"
+ versuffix=$major.$revision
;;
linux) # correct to gnu/linux during the next big refactor
func_arith $current - $age
major=.$func_arith_result
- versuffix="$major.$age.$revision"
+ versuffix=$major.$age.$revision
;;
osf)
func_arith $current - $age
major=.$func_arith_result
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
+ versuffix=.$current.$age.$revision
+ verstring=$current.$age.$revision
# Add in all the interfaces that we are compatible with.
loop=$age
- while test "$loop" -ne 0; do
+ while test 0 -ne "$loop"; do
func_arith $current - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
- verstring="$verstring:${iface}.0"
+ verstring=$verstring:$iface.0
done
# Make executables depend on our current version.
- func_append verstring ":${current}.0"
+ func_append verstring ":$current.0"
;;
qnx)
- major=".$current"
- versuffix=".$current"
+ major=.$current
+ versuffix=.$current
+ ;;
+
+ sco)
+ major=.$current
+ versuffix=.$current
;;
sunos)
- major=".$current"
- versuffix=".$current.$revision"
+ major=.$current
+ versuffix=.$current.$revision
;;
windows)
# Use '-' rather than '.', since we only want one
- # extension on DOS 8.3 filesystems.
+ # extension on DOS 8.3 file systems.
func_arith $current - $age
major=$func_arith_result
- versuffix="-$major"
+ versuffix=-$major
;;
*)
- func_fatal_configuration "unknown library version type \`$version_type'"
+ func_fatal_configuration "unknown library version type '$version_type'"
;;
esac
@@ -7506,42 +8995,45 @@
verstring=
;;
*)
- verstring="0.0"
+ verstring=0.0
;;
esac
- if test "$need_version" = no; then
+ if test no = "$need_version"; then
versuffix=
else
- versuffix=".0.0"
+ versuffix=.0.0
fi
fi
# Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
+ if test yes,no = "$avoid_version,$need_version"; then
major=
versuffix=
- verstring=""
+ verstring=
fi
# Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- func_warning "undefined symbols not allowed in $host shared libraries"
- build_libtool_libs=no
- build_old_libs=yes
+ if test yes = "$allow_undefined"; then
+ if test unsupported = "$allow_undefined_flag"; then
+ if test yes = "$build_old_libs"; then
+ func_warning "undefined symbols not allowed in $host shared libraries; building static only"
+ build_libtool_libs=no
+ else
+ func_fatal_error "can't build $host shared library unless -no-undefined is specified"
+ fi
fi
else
# Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
+ allow_undefined_flag=$no_undefined_flag
fi
fi
- func_generate_dlsyms "$libname" "$libname" "yes"
+ func_generate_dlsyms "$libname" "$libname" :
func_append libobjs " $symfileobj"
- test "X$libobjs" = "X " && libobjs=
+ test " " = "$libobjs" && libobjs=
- if test "$opt_mode" != relink; then
+ if test relink != "$opt_mode"; then
# Remove our outputs, but don't remove object files since they
# may have been created when compiling PIC objects.
removelist=
@@ -7550,8 +9042,8 @@
case $p in
*.$objext | *.gcno)
;;
- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
- if test "X$precious_files_regex" != "X"; then
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
+ if test -n "$precious_files_regex"; then
if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
then
continue
@@ -7567,11 +9059,11 @@
fi
# Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
func_append oldlibs " $output_objdir/$libname.$libext"
# Transform .lo files to .o files.
- oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
fi
# Eliminate all temporary directories.
@@ -7592,13 +9084,13 @@
*) func_append finalize_rpath " $libdir" ;;
esac
done
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
dependency_libs="$temp_xrpath $dependency_libs"
fi
fi
# Make sure dlfiles contains only unique files that won't be dlpreopened
- old_dlfiles="$dlfiles"
+ old_dlfiles=$dlfiles
dlfiles=
for lib in $old_dlfiles; do
case " $dlprefiles $dlfiles " in
@@ -7608,7 +9100,7 @@
done
# Make sure dlprefiles contains only unique files
- old_dlprefiles="$dlprefiles"
+ old_dlprefiles=$dlprefiles
dlprefiles=
for lib in $old_dlprefiles; do
case "$dlprefiles " in
@@ -7617,7 +9109,7 @@
esac
done
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
if test -n "$rpath"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
@@ -7641,7 +9133,7 @@
;;
*)
# Add libc to deplibs on all other systems if necessary.
- if test "$build_libtool_need_lc" = "yes"; then
+ if test yes = "$build_libtool_need_lc"; then
func_append deplibs " -lc"
fi
;;
@@ -7657,9 +9149,9 @@
# I'm not sure if I'm treating the release correctly. I think
# release should show up in the -l (ie -lgmp5) so we don't want to
# add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
+ release=
+ versuffix=
+ major=
newdeplibs=
droppeddeps=no
case $deplibs_check_method in
@@ -7688,20 +9180,20 @@
-l*)
func_stripname -l '' "$i"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $i "*)
func_append newdeplibs " $i"
- i=""
+ i=
;;
esac
fi
- if test -n "$i" ; then
+ if test -n "$i"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
set dummy $deplib_matches; shift
deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
func_append newdeplibs " $i"
else
droppeddeps=yes
@@ -7731,20 +9223,20 @@
$opt_dry_run || $RM conftest
if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
ldd_output=`ldd conftest`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $i "*)
func_append newdeplibs " $i"
- i=""
+ i=
;;
esac
fi
- if test -n "$i" ; then
+ if test -n "$i"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
set dummy $deplib_matches; shift
deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
func_append newdeplibs " $i"
else
droppeddeps=yes
@@ -7781,24 +9273,24 @@
-l*)
func_stripname -l '' "$a_deplib"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $a_deplib "*)
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
;;
esac
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
if test -n "$file_magic_glob"; then
libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
else
libnameglob=$libname
fi
- test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+ test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- if test "$want_nocaseglob" = yes; then
+ if test yes = "$want_nocaseglob"; then
shopt -s nocaseglob
potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
$nocaseglob
@@ -7816,25 +9308,25 @@
# We might still enter an endless loop, since a link
# loop can be closed while we follow links,
# but so what?
- potlib="$potent_lib"
+ potlib=$potent_lib
while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
+ *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
esac
done
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
$SED -e 10q |
$EGREP "$file_magic_regex" > /dev/null; then
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
break 2
fi
done
done
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
droppeddeps=yes
echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
@@ -7842,7 +9334,7 @@
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
+ if test -z "$potlib"; then
$ECHO "*** with $libname but no candidates were found. (...for file magic test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
@@ -7865,30 +9357,30 @@
-l*)
func_stripname -l '' "$a_deplib"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $a_deplib "*)
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
;;
esac
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
- potlib="$potent_lib" # see symlink-check above in file_magic test
+ potlib=$potent_lib # see symlink-check above in file_magic test
if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
$EGREP "$match_pattern_regex" > /dev/null; then
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
break 2
fi
done
done
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
droppeddeps=yes
echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
@@ -7896,7 +9388,7 @@
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
+ if test -z "$potlib"; then
$ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
@@ -7912,18 +9404,18 @@
done # Gone through all deplibs.
;;
none | unknown | *)
- newdeplibs=""
+ newdeplibs=
tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- for i in $predeps $postdeps ; do
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ for i in $predeps $postdeps; do
# can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
done
fi
case $tmp_deplibs in
*[!\ \ ]*)
echo
- if test "X$deplibs_check_method" = "Xnone"; then
+ if test none = "$deplibs_check_method"; then
echo "*** Warning: inter-library dependencies are not supported in this platform."
else
echo "*** Warning: inter-library dependencies are not known to be supported."
@@ -7947,8 +9439,8 @@
;;
esac
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
+ if test yes = "$droppeddeps"; then
+ if test yes = "$module"; then
echo
echo "*** Warning: libtool could not satisfy all declared inter-library"
$ECHO "*** dependencies of module $libname. Therefore, libtool will create"
@@ -7957,12 +9449,12 @@
if test -z "$global_symbol_pipe"; then
echo
echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
build_libtool_libs=module
build_old_libs=yes
else
@@ -7973,14 +9465,14 @@
echo "*** automatically added whenever a program is linked with this library"
echo "*** or is declared to -dlopen it."
- if test "$allow_undefined" = no; then
+ if test no = "$allow_undefined"; then
echo
echo "*** Since this library must not contain undefined symbols,"
echo "*** because either the platform does not support them or"
echo "*** it was explicitly requested with -no-undefined,"
echo "*** libtool will only create a static version of it."
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
build_libtool_libs=module
build_old_libs=yes
else
@@ -8026,7 +9518,7 @@
*) func_append new_libs " $deplib" ;;
esac
done
- deplibs="$new_libs"
+ deplibs=$new_libs
# All the library-specific variables (install_libdir is set above).
library_names=
@@ -8034,25 +9526,25 @@
dlname=
# Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- # Remove ${wl} instances when linking with ld.
+ if test yes = "$build_libtool_libs"; then
+ # Remove $wl instances when linking with ld.
# FIXME: should test the right _cmds variable.
case $archive_cmds in
*\$LD\ *) wl= ;;
esac
- if test "$hardcode_into_libs" = yes; then
+ if test yes = "$hardcode_into_libs"; then
# Hardcode the library paths
hardcode_libdirs=
dep_rpath=
- rpath="$finalize_rpath"
- test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ rpath=$finalize_rpath
+ test relink = "$opt_mode" || rpath=$compile_rpath$rpath
for libdir in $rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
func_replace_sysroot "$libdir"
libdir=$func_replace_sysroot_result
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8077,7 +9569,7 @@
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
fi
if test -n "$runpath_var" && test -n "$perm_rpath"; then
@@ -8091,8 +9583,8 @@
test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
fi
- shlibpath="$finalize_shlibpath"
- test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ shlibpath=$finalize_shlibpath
+ test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
if test -n "$shlibpath"; then
eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
fi
@@ -8102,19 +9594,19 @@
eval library_names=\"$library_names_spec\"
set dummy $library_names
shift
- realname="$1"
+ realname=$1
shift
if test -n "$soname_spec"; then
eval soname=\"$soname_spec\"
else
- soname="$realname"
+ soname=$realname
fi
if test -z "$dlname"; then
dlname=$soname
fi
- lib="$output_objdir/$realname"
+ lib=$output_objdir/$realname
linknames=
for link
do
@@ -8128,7 +9620,7 @@
delfiles=
if test -n "$export_symbols" && test -n "$include_expsyms"; then
$opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
- export_symbols="$output_objdir/$libname.uexp"
+ export_symbols=$output_objdir/$libname.uexp
func_append delfiles " $export_symbols"
fi
@@ -8137,31 +9629,31 @@
cygwin* | mingw* | cegcc*)
if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
# exporting using user supplied symfile
- if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ func_dll_def_p "$export_symbols" || {
# and it's NOT already a .def file. Must figure out
# which of the given symbols are data symbols and tag
# them as such. So, trigger use of export_symbols_cmds.
# export_symbols gets reassigned inside the "prepare
# the list of exported symbols" if statement, so the
# include_expsyms logic still works.
- orig_export_symbols="$export_symbols"
+ orig_export_symbols=$export_symbols
export_symbols=
always_export_symbols=yes
- fi
+ }
fi
;;
esac
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
+ if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
$opt_dry_run || $RM $export_symbols
cmds=$export_symbols_cmds
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd1 in $cmds; do
- IFS="$save_ifs"
+ IFS=$save_ifs
# Take the normal branch if the nm_file_list_spec branch
# doesn't work or if tool conversion is not needed.
case $nm_file_list_spec~$to_tool_file_cmd in
@@ -8175,7 +9667,7 @@
try_normal_branch=no
;;
esac
- if test "$try_normal_branch" = yes \
+ if test yes = "$try_normal_branch" \
&& { test "$len" -lt "$max_cmd_len" \
|| test "$max_cmd_len" -le -1; }
then
@@ -8186,7 +9678,7 @@
output_la=$func_basename_result
save_libobjs=$libobjs
save_output=$output
- output=${output_objdir}/${output_la}.nm
+ output=$output_objdir/$output_la.nm
func_to_tool_file "$output"
libobjs=$nm_file_list_spec$func_to_tool_file_result
func_append delfiles " $output"
@@ -8209,8 +9701,8 @@
break
fi
done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ IFS=$save_ifs
+ if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
fi
@@ -8218,16 +9710,16 @@
fi
if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
$opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
- if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
+ # 's' commands, which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
@@ -8246,11 +9738,11 @@
;;
esac
done
- deplibs="$tmp_deplibs"
+ deplibs=$tmp_deplibs
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec" &&
- test "$compiler_needs_object" = yes &&
+ test yes = "$compiler_needs_object" &&
test -z "$libobjs"; then
# extract the archives, so we have objects to list.
# TODO: could optimize this to just extract one archive.
@@ -8261,7 +9753,7 @@
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
test "X$libobjs" = "X " && libobjs=
else
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $convenience
@@ -8270,18 +9762,18 @@
fi
fi
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
func_append linker_flags " $flag"
fi
# Make a backup of the uninstalled library when relinking
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
fi
# Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
+ if test yes = "$module" && test -n "$module_cmds"; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
eval test_cmds=\"$module_expsym_cmds\"
cmds=$module_expsym_cmds
@@ -8299,7 +9791,7 @@
fi
fi
- if test "X$skipped_export" != "X:" &&
+ if test : != "$skipped_export" &&
func_len " $test_cmds" &&
len=$func_len_result &&
test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
@@ -8332,8 +9824,8 @@
last_robj=
k=1
- if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
- output=${output_objdir}/${output_la}.lnkscript
+ if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
+ output=$output_objdir/$output_la.lnkscript
func_verbose "creating GNU ld script: $output"
echo 'INPUT (' > $output
for obj in $save_libobjs
@@ -8345,14 +9837,14 @@
func_append delfiles " $output"
func_to_tool_file "$output"
output=$func_to_tool_file_result
- elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
- output=${output_objdir}/${output_la}.lnk
+ elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
+ output=$output_objdir/$output_la.lnk
func_verbose "creating linker input file list: $output"
: > $output
set x $save_libobjs
shift
firstobj=
- if test "$compiler_needs_object" = yes; then
+ if test yes = "$compiler_needs_object"; then
firstobj="$1 "
shift
fi
@@ -8367,7 +9859,7 @@
else
if test -n "$save_libobjs"; then
func_verbose "creating reloadable object files..."
- output=$output_objdir/$output_la-${k}.$objext
+ output=$output_objdir/$output_la-$k.$objext
eval test_cmds=\"$reload_cmds\"
func_len " $test_cmds"
len0=$func_len_result
@@ -8379,13 +9871,13 @@
func_len " $obj"
func_arith $len + $func_len_result
len=$func_arith_result
- if test "X$objlist" = X ||
+ if test -z "$objlist" ||
test "$len" -lt "$max_cmd_len"; then
func_append objlist " $obj"
else
# The command $test_cmds is almost too long, add a
# command to the queue.
- if test "$k" -eq 1 ; then
+ if test 1 -eq "$k"; then
# The first file doesn't have a previous command to add.
reload_objs=$objlist
eval concat_cmds=\"$reload_cmds\"
@@ -8395,10 +9887,10 @@
reload_objs="$objlist $last_robj"
eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
fi
- last_robj=$output_objdir/$output_la-${k}.$objext
+ last_robj=$output_objdir/$output_la-$k.$objext
func_arith $k + 1
k=$func_arith_result
- output=$output_objdir/$output_la-${k}.$objext
+ output=$output_objdir/$output_la-$k.$objext
objlist=" $obj"
func_len " $last_robj"
func_arith $len0 + $func_len_result
@@ -8410,9 +9902,9 @@
# files will link in the last one created.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
reload_objs="$objlist $last_robj"
- eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ eval concat_cmds=\"\$concat_cmds$reload_cmds\"
if test -n "$last_robj"; then
- eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
func_append delfiles " $output"
@@ -8420,9 +9912,9 @@
output=
fi
- if ${skipped_export-false}; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
+ ${skipped_export-false} && {
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
$opt_dry_run || $RM $export_symbols
libobjs=$output
# Append the command to create the export file.
@@ -8431,16 +9923,16 @@
if test -n "$last_robj"; then
eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
- fi
+ }
test -n "$save_libobjs" &&
func_verbose "creating a temporary reloadable object file: $output"
# Loop through the commands generated above and execute them.
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd in $concat_cmds; do
- IFS="$save_ifs"
- $opt_silent || {
+ IFS=$save_ifs
+ $opt_quiet || {
func_quote_for_expand "$cmd"
eval "func_echo $func_quote_for_expand_result"
}
@@ -8448,7 +9940,7 @@
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
@@ -8457,7 +9949,7 @@
exit $lt_exit
}
done
- IFS="$save_ifs"
+ IFS=$save_ifs
if test -n "$export_symbols_regex" && ${skipped_export-false}; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
@@ -8465,18 +9957,18 @@
fi
fi
- if ${skipped_export-false}; then
+ ${skipped_export-false} && {
if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
$opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
if test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
+ # 's' commands, which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
@@ -8485,7 +9977,7 @@
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
- fi
+ }
libobjs=$output
# Restore the value of output.
@@ -8499,7 +9991,7 @@
# value of $libobjs for piecewise linking.
# Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
+ if test yes = "$module" && test -n "$module_cmds"; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
cmds=$module_expsym_cmds
else
@@ -8521,7 +10013,7 @@
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
@@ -8529,11 +10021,12 @@
test "X$libobjs" = "X " && libobjs=
fi
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd in $cmds; do
- IFS="$save_ifs"
+ IFS=$sp$nl
eval cmd=\"$cmd\"
- $opt_silent || {
+ IFS=$save_ifs
+ $opt_quiet || {
func_quote_for_expand "$cmd"
eval "func_echo $func_quote_for_expand_result"
}
@@ -8541,7 +10034,7 @@
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
@@ -8550,10 +10043,10 @@
exit $lt_exit
}
done
- IFS="$save_ifs"
+ IFS=$save_ifs
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
if test -n "$convenience"; then
@@ -8573,39 +10066,39 @@
done
# If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
+ if test yes = "$module" || test yes = "$export_dynamic"; then
# On all known operating systems, these are identical.
- dlname="$soname"
+ dlname=$soname
fi
fi
;;
obj)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for objects"
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for objects"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ func_warning "'-l' and '-L' are ignored for objects" ;;
esac
test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for objects"
+ func_warning "'-rpath' is ignored for objects"
test -n "$xrpath" && \
- func_warning "\`-R' is ignored for objects"
+ func_warning "'-R' is ignored for objects"
test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for objects"
+ func_warning "'-version-info' is ignored for objects"
test -n "$release" && \
- func_warning "\`-release' is ignored for objects"
+ func_warning "'-release' is ignored for objects"
case $output in
*.lo)
test -n "$objs$old_deplibs" && \
- func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+ func_fatal_error "cannot build library object '$output' from non-libtool objects"
libobj=$output
func_lo2o "$libobj"
@@ -8613,7 +10106,7 @@
;;
*)
libobj=
- obj="$output"
+ obj=$output
;;
esac
@@ -8626,17 +10119,19 @@
# the extraction.
reload_conv_objs=
gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec and hope we can get by with
- # turning comma into space..
- wl=
-
+ # if reload_cmds runs $LD directly, get rid of -Wl from
+ # whole_archive_flag_spec and hope we can get by with turning comma
+ # into space.
+ case $reload_cmds in
+ *\$LD[\ \$]*) wl= ;;
+ esac
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
else
- gentop="$output_objdir/${obj}x"
+ gentop=$output_objdir/${obj}x
func_append generated " $gentop"
func_extract_archives $gentop $convenience
@@ -8645,12 +10140,12 @@
fi
# If we're not building shared, we need to use non_pic_objs
- test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+ test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
# Create the old-style object.
- reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+ reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
- output="$obj"
+ output=$obj
func_execute_cmds "$reload_cmds" 'exit $?'
# Exit if we aren't doing a library object file.
@@ -8662,7 +10157,7 @@
exit $EXIT_SUCCESS
fi
- if test "$build_libtool_libs" != yes; then
+ test yes = "$build_libtool_libs" || {
if test -n "$gentop"; then
func_show_eval '${RM}r "$gentop"'
fi
@@ -8672,12 +10167,12 @@
# $show "echo timestamp > $libobj"
# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
exit $EXIT_SUCCESS
- fi
+ }
- if test -n "$pic_flag" || test "$pic_mode" != default; then
+ if test -n "$pic_flag" || test default != "$pic_mode"; then
# Only do commands if we really have different PIC objects.
reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
+ output=$libobj
func_execute_cmds "$reload_cmds" 'exit $?'
fi
@@ -8694,16 +10189,14 @@
output=$func_stripname_result.exe;;
esac
test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for programs"
+ func_warning "'-version-info' is ignored for programs"
test -n "$release" && \
- func_warning "\`-release' is ignored for programs"
+ func_warning "'-release' is ignored for programs"
- test "$preload" = yes \
- && test "$dlopen_support" = unknown \
- && test "$dlopen_self" = unknown \
- && test "$dlopen_self_static" = unknown && \
- func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+ $preload \
+ && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
+ && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
@@ -8717,11 +10210,11 @@
*-*-darwin*)
# Don't allow lazy linking, it breaks C++ global constructors
# But is supposedly fixed on 10.4 or later (yay!).
- if test "$tagname" = CXX ; then
+ if test CXX = "$tagname"; then
case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
10.[0123])
- func_append compile_command " ${wl}-bind_at_load"
- func_append finalize_command " ${wl}-bind_at_load"
+ func_append compile_command " $wl-bind_at_load"
+ func_append finalize_command " $wl-bind_at_load"
;;
esac
fi
@@ -8757,7 +10250,7 @@
*) func_append new_libs " $deplib" ;;
esac
done
- compile_deplibs="$new_libs"
+ compile_deplibs=$new_libs
func_append compile_command " $compile_deplibs"
@@ -8781,7 +10274,7 @@
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8804,7 +10297,7 @@
fi
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
- testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+ testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$libdir:"*) ;;
::) dllsearchpath=$libdir;;
@@ -8821,10 +10314,10 @@
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
- compile_rpath="$rpath"
+ compile_rpath=$rpath
rpath=
hardcode_libdirs=
@@ -8832,7 +10325,7 @@
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8857,45 +10350,43 @@
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
- finalize_rpath="$rpath"
+ finalize_rpath=$rpath
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ if test -n "$libobjs" && test yes = "$build_old_libs"; then
# Transform all the library objects into standard objects.
compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
fi
- func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+ func_generate_dlsyms "$outputname" "@PROGRAM@" false
# template prelinking step
if test -n "$prelink_cmds"; then
func_execute_cmds "$prelink_cmds" 'exit $?'
fi
- wrappers_required=yes
+ wrappers_required=:
case $host in
*cegcc* | *mingw32ce*)
# Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
- wrappers_required=no
+ wrappers_required=false
;;
*cygwin* | *mingw* )
- if test "$build_libtool_libs" != yes; then
- wrappers_required=no
- fi
+ test yes = "$build_libtool_libs" || wrappers_required=false
;;
*)
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
- wrappers_required=no
+ if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+ wrappers_required=false
fi
;;
esac
- if test "$wrappers_required" = no; then
+ $wrappers_required || {
# Replace the output file specification.
compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
- link_command="$compile_command$compile_rpath"
+ link_command=$compile_command$compile_rpath
# We have no uninstalled library dependencies, so finalize right now.
exit_status=0
@@ -8908,12 +10399,12 @@
fi
# Delete the generated files.
- if test -f "$output_objdir/${outputname}S.${objext}"; then
- func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ if test -f "$output_objdir/${outputname}S.$objext"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
fi
exit $exit_status
- fi
+ }
if test -n "$compile_shlibpath$finalize_shlibpath"; then
compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
@@ -8943,9 +10434,9 @@
fi
fi
- if test "$no_install" = yes; then
+ if test yes = "$no_install"; then
# We don't need to create a wrapper script.
- link_command="$compile_var$compile_command$compile_rpath"
+ link_command=$compile_var$compile_command$compile_rpath
# Replace the output file specification.
link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
# Delete the old output file.
@@ -8962,27 +10453,28 @@
exit $EXIT_SUCCESS
fi
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
+ case $hardcode_action,$fast_install in
+ relink,*)
+ # Fast installation is not supported
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
- func_warning "this platform does not like uninstalled shared libraries"
- func_warning "\`$output' will be relinked during installation"
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "'$output' will be relinked during installation"
+ ;;
+ *,yes)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ ;;
+ *,no)
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
+ ;;
+ *,needless)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=
+ ;;
+ esac
# Replace the output file specification.
link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
@@ -9039,8 +10531,8 @@
func_dirname_and_basename "$output" "" "."
output_name=$func_basename_result
output_path=$func_dirname_result
- cwrappersource="$output_path/$objdir/lt-$output_name.c"
- cwrapper="$output_path/$output_name.exe"
+ cwrappersource=$output_path/$objdir/lt-$output_name.c
+ cwrapper=$output_path/$output_name.exe
$RM $cwrappersource $cwrapper
trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
@@ -9061,7 +10553,7 @@
trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
$opt_dry_run || {
# note: this script will not be executed, so do not chmod.
- if test "x$build" = "x$host" ; then
+ if test "x$build" = "x$host"; then
$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
else
func_emit_wrapper no > $func_ltwrapper_scriptname_result
@@ -9084,25 +10576,27 @@
# See if we need to build an old-fashioned archive.
for oldlib in $oldlibs; do
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save $symfileobj"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
+ case $build_libtool_libs in
+ convenience)
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs=$convenience
build_libtool_libs=no
- else
+ ;;
+ module)
+ oldobjs=$libobjs_save
+ addlibs=$old_convenience
+ build_libtool_libs=no
+ ;;
+ *)
oldobjs="$old_deplibs $non_pic_objects"
- if test "$preload" = yes && test -f "$symfileobj"; then
- func_append oldobjs " $symfileobj"
- fi
- fi
- addlibs="$old_convenience"
- fi
+ $preload && test -f "$symfileobj" \
+ && func_append oldobjs " $symfileobj"
+ addlibs=$old_convenience
+ ;;
+ esac
if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $addlibs
@@ -9110,13 +10604,13 @@
fi
# Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
cmds=$old_archive_from_new_cmds
else
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
@@ -9137,7 +10631,7 @@
:
else
echo "copying selected object files to avoid basename conflicts..."
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_mkdir_p "$gentop"
save_oldobjs=$oldobjs
@@ -9146,7 +10640,7 @@
for obj in $save_oldobjs
do
func_basename "$obj"
- objbase="$func_basename_result"
+ objbase=$func_basename_result
case " $oldobjs " in
" ") oldobjs=$obj ;;
*[\ /]"$objbase "*)
@@ -9215,18 +10709,18 @@
else
# the above command should be used before it gets too long
oldobjs=$objlist
- if test "$obj" = "$last_oldobj" ; then
+ if test "$obj" = "$last_oldobj"; then
RANLIB=$save_RANLIB
fi
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
objlist=
len=$len0
fi
done
RANLIB=$save_RANLIB
oldobjs=$objlist
- if test "X$oldobjs" = "X" ; then
+ if test -z "$oldobjs"; then
eval cmds=\"\$concat_cmds\"
else
eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
@@ -9243,7 +10737,7 @@
case $output in
*.la)
old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
+ test yes = "$build_old_libs" && old_library=$libname.$libext
func_verbose "creating $output"
# Preserve any variables that may affect compiler behavior
@@ -9258,31 +10752,31 @@
fi
done
# Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
- if test "$hardcode_automatic" = yes ; then
+ if test yes = "$hardcode_automatic"; then
relink_command=
fi
# Only create the output if not a dry run.
$opt_dry_run || {
for installed in no yes; do
- if test "$installed" = yes; then
+ if test yes = "$installed"; then
if test -z "$install_libdir"; then
break
fi
- output="$output_objdir/$outputname"i
+ output=$output_objdir/${outputname}i
# Replace all uninstalled libtool libraries with the installed ones
newdependency_libs=
for deplib in $dependency_libs; do
case $deplib in
*.la)
func_basename "$deplib"
- name="$func_basename_result"
+ name=$func_basename_result
func_resolve_sysroot "$deplib"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_fatal_error "'$deplib' is not a valid libtool archive"
func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
;;
-L*)
@@ -9298,23 +10792,23 @@
*) func_append newdependency_libs " $deplib" ;;
esac
done
- dependency_libs="$newdependency_libs"
+ dependency_libs=$newdependency_libs
newdlfiles=
for lib in $dlfiles; do
case $lib in
*.la)
func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_fatal_error "'$lib' is not a valid libtool archive"
func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
;;
*) func_append newdlfiles " $lib" ;;
esac
done
- dlfiles="$newdlfiles"
+ dlfiles=$newdlfiles
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
@@ -9324,34 +10818,34 @@
# didn't already link the preopened objects directly into
# the library:
func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_fatal_error "'$lib' is not a valid libtool archive"
func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
;;
esac
done
- dlprefiles="$newdlprefiles"
+ dlprefiles=$newdlprefiles
else
newdlfiles=
for lib in $dlfiles; do
case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
*) abs=`pwd`"/$lib" ;;
esac
func_append newdlfiles " $abs"
done
- dlfiles="$newdlfiles"
+ dlfiles=$newdlfiles
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
*) abs=`pwd`"/$lib" ;;
esac
func_append newdlprefiles " $abs"
done
- dlprefiles="$newdlprefiles"
+ dlprefiles=$newdlprefiles
fi
$RM $output
# place dlname in correct position for cygwin
@@ -9367,10 +10861,9 @@
case $host,$output,$installed,$module,$dlname in
*cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
# If a -bindir argument was supplied, place the dll there.
- if test "x$bindir" != x ;
- then
+ if test -n "$bindir"; then
func_relative_path "$install_libdir" "$bindir"
- tdlname=$func_relative_path_result$dlname
+ tdlname=$func_relative_path_result/$dlname
else
# Otherwise fall back on heuristic.
tdlname=../bin/$dlname
@@ -9379,7 +10872,7 @@
esac
$ECHO > $output "\
# $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
@@ -9393,7 +10886,7 @@
# The name of the static archive.
old_library='$old_library'
-# Linker flags that can not go in dependency_libs.
+# Linker flags that cannot go in dependency_libs.
inherited_linker_flags='$new_inherited_linker_flags'
# Libraries that this one depends upon.
@@ -9419,7 +10912,7 @@
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
- if test "$installed" = no && test "$need_relink" = yes; then
+ if test no,yes = "$installed,$need_relink"; then
$ECHO >> $output "\
relink_command=\"$relink_command\""
fi
@@ -9434,27 +10927,29 @@
exit $EXIT_SUCCESS
}
-{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
- func_mode_link ${1+"$@"}
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+ func_mode_link ${1+"$@"}
+fi
# func_mode_uninstall arg...
func_mode_uninstall ()
{
- $opt_debug
- RM="$nonopt"
+ $debug_cmd
+
+ RM=$nonopt
files=
- rmforce=
+ rmforce=false
exit_status=0
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
- libtool_install_magic="$magic"
+ libtool_install_magic=$magic
for arg
do
case $arg in
- -f) func_append RM " $arg"; rmforce=yes ;;
+ -f) func_append RM " $arg"; rmforce=: ;;
-*) func_append RM " $arg" ;;
*) func_append files " $arg" ;;
esac
@@ -9467,18 +10962,18 @@
for file in $files; do
func_dirname "$file" "" "."
- dir="$func_dirname_result"
- if test "X$dir" = X.; then
- odir="$objdir"
+ dir=$func_dirname_result
+ if test . = "$dir"; then
+ odir=$objdir
else
- odir="$dir/$objdir"
+ odir=$dir/$objdir
fi
func_basename "$file"
- name="$func_basename_result"
- test "$opt_mode" = uninstall && odir="$dir"
+ name=$func_basename_result
+ test uninstall = "$opt_mode" && odir=$dir
# Remember odir for removal later, being careful to avoid duplicates
- if test "$opt_mode" = clean; then
+ if test clean = "$opt_mode"; then
case " $rmdirs " in
*" $odir "*) ;;
*) func_append rmdirs " $odir" ;;
@@ -9493,11 +10988,11 @@
elif test -d "$file"; then
exit_status=1
continue
- elif test "$rmforce" = yes; then
+ elif $rmforce; then
continue
fi
- rmfiles="$file"
+ rmfiles=$file
case $name in
*.la)
@@ -9511,7 +11006,7 @@
done
test -n "$old_library" && func_append rmfiles " $odir/$old_library"
- case "$opt_mode" in
+ case $opt_mode in
clean)
case " $library_names " in
*" $dlname "*) ;;
@@ -9522,12 +11017,12 @@
uninstall)
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
- func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
fi
if test -n "$old_library"; then
# Do each command in the old_postuninstall commands.
- func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
fi
# FIXME: should reinstall the best remaining shared library.
;;
@@ -9543,21 +11038,19 @@
func_source $dir/$name
# Add PIC object to the list of files to remove.
- if test -n "$pic_object" &&
- test "$pic_object" != none; then
+ if test -n "$pic_object" && test none != "$pic_object"; then
func_append rmfiles " $dir/$pic_object"
fi
# Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" &&
- test "$non_pic_object" != none; then
+ if test -n "$non_pic_object" && test none != "$non_pic_object"; then
func_append rmfiles " $dir/$non_pic_object"
fi
fi
;;
*)
- if test "$opt_mode" = clean ; then
+ if test clean = "$opt_mode"; then
noexename=$name
case $file in
*.exe)
@@ -9584,12 +11077,12 @@
# note $name still contains .exe if it was in $file originally
# as does the version of $file that was added into $rmfiles
- func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
+ func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+ if test yes = "$fast_install" && test -n "$relink_command"; then
func_append rmfiles " $odir/lt-$name"
fi
- if test "X$noexename" != "X$name" ; then
- func_append rmfiles " $odir/lt-${noexename}.c"
+ if test "X$noexename" != "X$name"; then
+ func_append rmfiles " $odir/lt-$noexename.c"
fi
fi
fi
@@ -9598,7 +11091,7 @@
func_show_eval "$RM $rmfiles" 'exit_status=1'
done
- # Try to remove the ${objdir}s in the directories where we deleted files
+ # Try to remove the $objdir's in the directories where we deleted files
for dir in $rmdirs; do
if test -d "$dir"; then
func_show_eval "rmdir $dir >/dev/null 2>&1"
@@ -9608,16 +11101,17 @@
exit $exit_status
}
-{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
- func_mode_uninstall ${1+"$@"}
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+ func_mode_uninstall ${1+"$@"}
+fi
test -z "$opt_mode" && {
- help="$generic_help"
+ help=$generic_help
func_fatal_help "you must specify a MODE"
}
test -z "$exec_cmd" && \
- func_fatal_help "invalid operation mode \`$opt_mode'"
+ func_fatal_help "invalid operation mode '$opt_mode'"
if test -n "$exec_cmd"; then
eval exec "$exec_cmd"
@@ -9628,7 +11122,7 @@
# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries. Given conflicting
+# where we disable both kinds of libraries. Given conflicting
# choices, we go for a static library, that is the most portable,
# since we can't tell whether shared libraries were disabled because
# the user asked for that or because the platform doesn't support
@@ -9651,5 +11145,3 @@
# mode:shell-script
# sh-indentation:2
# End:
-# vi:sw=2
-
diff --git a/dist/m4/libtool.m4 b/dist/m4/libtool.m4
index 44e0ecf..a3bc337 100644
--- a/dist/m4/libtool.m4
+++ b/dist/m4/libtool.m4
@@ -1,8 +1,6 @@
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is free software; the Free Software Foundation gives
@@ -10,36 +8,30 @@
# modifications, as long as this notice is preserved.
m4_define([_LT_COPYING], [dnl
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
#
-# This file is part of GNU Libtool.
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
])
-# serial 57 LT_INIT
+# serial 58 LT_INIT
# LT_PREREQ(VERSION)
@@ -67,7 +59,7 @@
# LT_INIT([OPTIONS])
# ------------------
AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK
AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
AC_BEFORE([$0], [LT_LANG])dnl
AC_BEFORE([$0], [LT_OUTPUT])dnl
@@ -91,7 +83,7 @@
_LT_SET_OPTIONS([$0], [$1])
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -111,26 +103,43 @@
dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+# _LT_PREPARE_CC_BASENAME
+# -----------------------
+m4_defun([_LT_PREPARE_CC_BASENAME], [
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in @S|@*""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+])# _LT_PREPARE_CC_BASENAME
+
+
# _LT_CC_BASENAME(CC)
# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
+# but that macro is also expanded into generated libtool script, which
+# arranges for $SED and $ECHO to be set by different means.
m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
- case $cc_temp in
- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+[m4_require([_LT_PREPARE_CC_BASENAME])dnl
+AC_REQUIRE([_LT_DECL_SED])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+func_cc_basename $1
+cc_basename=$func_cc_basename_result
])
# _LT_FILEUTILS_DEFAULTS
# ----------------------
# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.
m4_defun([_LT_FILEUTILS_DEFAULTS],
[: ${CP="cp -f"}
: ${MV="mv -f"}
@@ -177,15 +186,16 @@
m4_require([_LT_CMD_OLD_ARCHIVE])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
m4_require([_LT_WITH_SYSROOT])dnl
+m4_require([_LT_CMD_TRUNCATE])dnl
_LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
])
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
@@ -198,7 +208,7 @@
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
+ if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -209,14 +219,14 @@
ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
# Set sane defaults for various variables
test -z "$CC" && CC=cc
@@ -269,14 +279,14 @@
# _LT_PROG_LTMAIN
# ---------------
-# Note that this code is called both from `configure', and `config.status'
+# Note that this code is called both from 'configure', and 'config.status'
# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# 'config.status' has no value for ac_aux_dir unless we are using Automake,
# so we pass a copy along to make sure it has a sensible value anyway.
m4_defun([_LT_PROG_LTMAIN],
[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
])# _LT_PROG_LTMAIN
@@ -286,7 +296,7 @@
# So that we can recreate a full libtool script including additional
# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
+# in macros and then make a single call at the end using the 'libtool'
# label.
@@ -421,8 +431,8 @@
# _LT_CONFIG_STATUS_DECLARE([VARNAME])
# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'. VARNAME
+# Quote a variable value, and forward it to 'config.status' so that its
+# declaration there will have the same value as in 'configure'. VARNAME
# must have a single quote delimited value for this to work.
m4_define([_LT_CONFIG_STATUS_DECLARE],
[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
@@ -446,7 +456,7 @@
# Output comment and list of tags supported by the script
m4_defun([_LT_LIBTOOL_TAGS],
[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
+available_tags='_LT_TAGS'dnl
])
@@ -474,7 +484,7 @@
# _LT_LIBTOOL_CONFIG_VARS
# -----------------------
# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
# section) are produced by _LT_LIBTOOL_TAG_VARS.
m4_defun([_LT_LIBTOOL_CONFIG_VARS],
@@ -500,8 +510,8 @@
# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
# variables for single and double quote escaping we saved from calls
# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'. Finally, any additional code accumulated
+# into 'config.status', and then the shell code to quote escape them in
+# for loops in 'config.status'. Finally, any additional code accumulated
# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
m4_defun([_LT_CONFIG_COMMANDS],
[AC_PROVIDE_IFELSE([LT_OUTPUT],
@@ -547,7 +557,7 @@
]], lt_decl_quote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -560,7 +570,7 @@
]], lt_decl_dquote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -576,7 +586,7 @@
# Generate a child script FILE with all initialization necessary to
# reuse the environment learned by the parent script, and make the
# file executable. If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins. After this
+# '#!' sequence but before initialization text begins. After this
# macro, additional text can be appended to FILE to form the body of
# the child script. The macro ends with non-zero status if the
# file could not be fully written (such as if the disk is full).
@@ -598,7 +608,7 @@
_AS_PREPARE
exec AS_MESSAGE_FD>&1
_ASEOF
-test $lt_write_fail = 0 && chmod +x $1[]dnl
+test 0 = "$lt_write_fail" && chmod +x $1[]dnl
m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
# LT_OUTPUT
@@ -621,7 +631,7 @@
} >&AS_MESSAGE_LOG_FD
lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
+'$as_me' creates a local libtool stub from the current configuration,
for use in further configure time tests before the real libtool is
generated.
@@ -643,7 +653,7 @@
This config.lt script is free software; the Free Software Foundation
gives unlimited permision to copy, distribute and modify it."
-while test $[#] != 0
+while test 0 != $[#]
do
case $[1] in
--version | --v* | -V )
@@ -656,10 +666,10 @@
lt_cl_silent=: ;;
-*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
+Try '$[0] --help' for more information.]) ;;
*) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
+Try '$[0] --help' for more information.]) ;;
esac
shift
done
@@ -685,7 +695,7 @@
# open by configure. Here we exec the FD to /dev/null, effectively closing
# config.log, so it can be properly (re)opened and appended to by config.lt.
lt_cl_success=:
-test "$silent" = yes &&
+test yes = "$silent" &&
lt_config_lt_args="$lt_config_lt_args --quiet"
exec AS_MESSAGE_LOG_FD>/dev/null
$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
@@ -705,27 +715,31 @@
_LT_CONFIG_SAVE_COMMANDS([
m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
m4_if(_LT_TAG, [C], [
- # See if we are running on zsh, and set the options which allow our
+ # See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
+ if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
- cfgfile="${ofile}T"
+ cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Generated automatically by $as_me ($PACKAGE) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
_LT_COPYING
_LT_LIBTOOL_TAGS
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
# ### BEGIN LIBTOOL CONFIG
_LT_LIBTOOL_CONFIG_VARS
_LT_LIBTOOL_TAG_VARS
@@ -733,13 +747,24 @@
_LT_EOF
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_PREPARE_MUNGE_PATH_LIST
+_LT_PREPARE_CC_BASENAME
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
case $host_os in
aix3*)
cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -756,8 +781,6 @@
sed '$q' "$ltmain" >> "$cfgfile" \
|| (rm -f "$cfgfile"; exit 1)
- _LT_PROG_REPLACE_SHELLFNS
-
mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
@@ -775,7 +798,6 @@
[m4_if([$1], [], [
PACKAGE='$PACKAGE'
VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
RM='$RM'
ofile='$ofile'], [])
])dnl /_LT_CONFIG_SAVE_COMMANDS
@@ -974,7 +996,7 @@
AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
[lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
+ if test -z "$LT_MULTI_MODULE"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
@@ -992,7 +1014,7 @@
cat conftest.err >&AS_MESSAGE_LOG_FD
# Otherwise, if the output was created with a 0 exit code from
# the compiler, it worked.
- elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
@@ -1010,7 +1032,7 @@
AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
[lt_cv_ld_exported_symbols_list=yes],
[lt_cv_ld_exported_symbols_list=no])
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
])
AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
@@ -1032,7 +1054,7 @@
_lt_result=$?
if test -s conftest.err && $GREP force_load conftest.err; then
cat conftest.err >&AS_MESSAGE_LOG_FD
- elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
lt_cv_ld_force_load=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
@@ -1042,32 +1064,32 @@
])
case $host_os in
rhapsody* | darwin1.[[012]])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[[012]]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]][[,.]]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
_lt_dar_single_mod='$single_module'
fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
fi
- if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
@@ -1087,29 +1109,29 @@
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- if test "$lt_cv_ld_force_load" = "yes"; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ if test yes = "$lt_cv_ld_force_load"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
[FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=''
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
- if test "$_lt_dar_can_shared" = "yes"; then
+ if test yes = "$_lt_dar_can_shared"; then
output_verbose_link_cmd=func_echo_all
- _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
m4_if([$1], [CXX],
-[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
- _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+[ if test yes != "$lt_cv_apple_cc_single_mod"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
fi
],[])
else
@@ -1129,7 +1151,7 @@
# Allow to override them for all tags through lt_cv_aix_libpath.
m4_defun([_LT_SYS_MODULE_PATH_AIX],
[m4_require([_LT_DECL_SED])dnl
-if test "${lt_cv_aix_libpath+set}" = set; then
+if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
@@ -1147,7 +1169,7 @@
_LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi],[])
if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
- _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib
fi
])
aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
@@ -1167,8 +1189,8 @@
# -----------------------
# Find how we can fake an echo command that does not interpret backslash.
# In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
+# of the generated configure script that will find a shell with a builtin
+# printf (that we can use as an echo command).
m4_defun([_LT_PROG_ECHO_BACKSLASH],
[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
@@ -1196,10 +1218,10 @@
# Invoke $ECHO with all args, space-separated.
func_echo_all ()
{
- $ECHO "$*"
+ $ECHO "$*"
}
-case "$ECHO" in
+case $ECHO in
printf*) AC_MSG_RESULT([printf]) ;;
print*) AC_MSG_RESULT([print -r]) ;;
*) AC_MSG_RESULT([cat]) ;;
@@ -1225,16 +1247,17 @@
AC_DEFUN([_LT_WITH_SYSROOT],
[AC_MSG_CHECKING([for sysroot])
AC_ARG_WITH([sysroot],
-[ --with-sysroot[=DIR] Search for dependent libraries within DIR
- (or the compiler's sysroot if not specified).],
+[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
+ [Search for dependent libraries within DIR (or the compiler's sysroot
+ if not specified).])],
[], [with_sysroot=no])
dnl lt_sysroot will always be passed unquoted. We quote it here
dnl in case the user passed a directory name.
lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
yes)
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_sysroot=`$CC --print-sysroot 2>/dev/null`
fi
;; #(
@@ -1244,14 +1267,14 @@
no|'')
;; #(
*)
- AC_MSG_RESULT([${with_sysroot}])
+ AC_MSG_RESULT([$with_sysroot])
AC_MSG_ERROR([The sysroot must be an absolute path.])
;;
esac
AC_MSG_RESULT([${lt_sysroot:-no}])
_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
-[dependent libraries, and in which our libraries should be installed.])])
+[dependent libraries, and where our libraries should be installed.])])
# _LT_ENABLE_LOCK
# ---------------
@@ -1259,31 +1282,33 @@
[AC_ARG_ENABLE([libtool-lock],
[AS_HELP_STRING([--disable-libtool-lock],
[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
- HPUX_IA64_MODE="32"
+ HPUX_IA64_MODE=32
;;
*ELF-64*)
- HPUX_IA64_MODE="64"
+ HPUX_IA64_MODE=64
;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
@@ -1312,9 +1337,46 @@
rm -rf conftest*
;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
@@ -1324,9 +1386,19 @@
LD="${LD-ld} -m elf_i386_fbsd"
;;
x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
;;
- ppc64-*linux*|powerpc64-*linux*)
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
@@ -1345,7 +1417,10 @@
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
- ppc*-*linux*|powerpc*-*linux*)
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
@@ -1363,19 +1438,20 @@
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
+ SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_LANG_PUSH(C)
AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
AC_LANG_POP])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ if test yes != "$lt_cv_cc_needs_belf"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+ CFLAGS=$SAVE_CFLAGS
fi
;;
*-*solaris*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
@@ -1383,7 +1459,7 @@
case $lt_cv_prog_gnu_ld in
yes*)
case $host in
- i?86-*-solaris*)
+ i?86-*-solaris*|x86_64-*-solaris*)
LD="${LD-ld} -m elf_x86_64"
;;
sparc*-*-solaris*)
@@ -1392,7 +1468,7 @@
esac
# GNU ld 2.21 introduced _sol2 emulations. Use them if available.
if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
- LD="${LD-ld}_sol2"
+ LD=${LD-ld}_sol2
fi
;;
*)
@@ -1408,7 +1484,7 @@
;;
esac
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
])# _LT_ENABLE_LOCK
@@ -1427,11 +1503,11 @@
[echo conftest.$ac_objext > conftest.lst
lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
AC_TRY_EVAL([lt_ar_try])
- if test "$ac_status" -eq 0; then
+ if test 0 -eq "$ac_status"; then
# Ensure the archiver fails upon bogus file names.
rm -f conftest.$ac_objext libconftest.a
AC_TRY_EVAL([lt_ar_try])
- if test "$ac_status" -ne 0; then
+ if test 0 -ne "$ac_status"; then
lt_cv_ar_at_file=@
fi
fi
@@ -1439,7 +1515,7 @@
])
])
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
archiver_list_spec=
else
archiver_list_spec=$lt_cv_ar_at_file
@@ -1470,7 +1546,7 @@
if test -n "$RANLIB"; then
case $host_os in
- openbsd*)
+ bitrig* | openbsd*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
@@ -1506,7 +1582,7 @@
[$2=no
m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$3"
+ lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
@@ -1533,7 +1609,7 @@
$RM conftest*
])
-if test x"[$]$2" = xyes; then
+if test yes = "[$]$2"; then
m4_if([$5], , :, [$5])
else
m4_if([$6], , :, [$6])
@@ -1555,7 +1631,7 @@
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $3"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -1574,10 +1650,10 @@
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
])
-if test x"[$]$2" = xyes; then
+if test yes = "[$]$2"; then
m4_if([$4], , :, [$4])
else
m4_if([$5], , :, [$5])
@@ -1598,7 +1674,7 @@
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
- teststring="ABCD"
+ teststring=ABCD
case $build_os in
msdosdjgpp*)
@@ -1638,7 +1714,7 @@
lt_cv_sys_max_cmd_len=8192;
;;
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -1688,22 +1764,23 @@
;;
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
+ if test -n "$lt_cv_sys_max_cmd_len" && \
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
+ for i in 1 2 3 4 5 6 7 8; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
= "X$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
+ test 17 != "$i" # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
@@ -1719,7 +1796,7 @@
;;
esac
])
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
else
AC_MSG_RESULT(none)
@@ -1747,7 +1824,7 @@
# ----------------------------------------------------------------
m4_defun([_LT_TRY_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
+if test yes = "$cross_compiling"; then :
[$4]
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -1794,9 +1871,9 @@
# endif
#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
@@ -1822,7 +1899,7 @@
return status;
}]
_LT_EOF
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+ if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
lt_status=$?
case x$lt_status in
@@ -1843,7 +1920,7 @@
# ------------------
AC_DEFUN([LT_SYS_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
+if test yes != "$enable_dlopen"; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
@@ -1853,44 +1930,52 @@
case $host_os in
beos*)
- lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen=load_add_on
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen=LoadLibrary
lt_cv_dlopen_libs=
;;
cygwin*)
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
;;
darwin*)
- # if libdl is installed we need to link against it
+ # if libdl is installed we need to link against it
AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
- lt_cv_dlopen="dyld"
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[
+ lt_cv_dlopen=dyld
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
])
;;
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
*)
AC_CHECK_FUNC([shl_load],
- [lt_cv_dlopen="shl_load"],
+ [lt_cv_dlopen=shl_load],
[AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+ [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld],
[AC_CHECK_FUNC([dlopen],
- [lt_cv_dlopen="dlopen"],
+ [lt_cv_dlopen=dlopen],
[AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],
[AC_CHECK_LIB([svld], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld],
[AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+ [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld])
])
])
])
@@ -1899,21 +1984,21 @@
;;
esac
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
+ if test no = "$lt_cv_dlopen"; then
enable_dlopen=no
+ else
+ enable_dlopen=yes
fi
case $lt_cv_dlopen in
dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- save_LIBS="$LIBS"
+ save_LIBS=$LIBS
LIBS="$lt_cv_dlopen_libs $LIBS"
AC_CACHE_CHECK([whether a program can dlopen itself],
@@ -1923,7 +2008,7 @@
lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
])
- if test "x$lt_cv_dlopen_self" = xyes; then
+ if test yes = "$lt_cv_dlopen_self"; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
lt_cv_dlopen_self_static, [dnl
@@ -1933,9 +2018,9 @@
])
fi
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
;;
esac
@@ -2027,8 +2112,8 @@
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_COMPILER_C_O([$1])
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
AC_MSG_CHECKING([if we can lock with hard links])
hard_links=yes
@@ -2038,8 +2123,8 @@
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
AC_MSG_RESULT([$hard_links])
- if test "$hard_links" = no; then
- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+ if test no = "$hard_links"; then
+ AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe])
need_locks=warn
fi
else
@@ -2066,8 +2151,8 @@
_LT_DECL([], [objdir], [0],
[The name of the directory that contains temporary libtool files])dnl
m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
- [Define to the sub-directory in which libtool stores uninstalled libraries.])
+AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/",
+ [Define to the sub-directory where libtool stores uninstalled libraries.])
])# _LT_CHECK_OBJDIR
@@ -2079,15 +2164,15 @@
_LT_TAGVAR(hardcode_action, $1)=
if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
test -n "$_LT_TAGVAR(runpath_var, $1)" ||
- test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+ test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then
# We can hardcode non-existent directories.
- if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+ if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
+ test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
# Linking always hardcodes the temporary library directory.
_LT_TAGVAR(hardcode_action, $1)=relink
else
@@ -2101,12 +2186,12 @@
fi
AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
- test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
+ test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
# Fast installation is not supported
enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
@@ -2130,7 +2215,7 @@
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
- if test -n "$STRIP" ; then
+ if test -n "$STRIP"; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
AC_MSG_RESULT([yes])
@@ -2148,6 +2233,47 @@
])# _LT_CMD_STRIPLIB
+# _LT_PREPARE_MUNGE_PATH_LIST
+# ---------------------------
+# Make sure func_munge_path_list() is defined correctly.
+m4_defun([_LT_PREPARE_MUNGE_PATH_LIST],
+[[# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x@S|@2 in
+ x)
+ ;;
+ *:)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
+ ;;
+ x:*)
+ eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
+ ;;
+ *)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+]])# _LT_PREPARE_PATH_LIST
+
+
# _LT_SYS_DYNAMIC_LINKER([TAG])
# -----------------------------
# PORTME Fill in your ld.so characteristics
@@ -2158,17 +2284,18 @@
m4_require([_LT_DECL_OBJDUMP])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl
AC_MSG_CHECKING([dynamic linker characteristics])
m4_if([$1],
[], [
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
esac
case $host_os in
- mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
- *) lt_sed_strip_eq="s,=/,/,g" ;;
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
esac
lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
case $lt_search_path_spec in
@@ -2184,28 +2311,35 @@
;;
esac
# Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
+ # and add multilib dir if necessary...
lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
lt_count++;
} else {
if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
+ lt_foo = "/" $lt_i lt_foo;
} else {
lt_count--;
}
@@ -2219,7 +2353,7 @@
# for these hosts.
case $host_os in
mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
- $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+ $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;;
esac
sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
@@ -2228,7 +2362,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
@@ -2245,14 +2379,17 @@
# flags to be left without arguments
need_version=unknown
+AC_ARG_VAR([LT_SYS_LIBRARY_PATH],
+[User-defined run-time library search path.])
+
case $host_os in
aix3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
+ soname_spec='$libname$release$shared_ext$major'
;;
aix[[4-9]]*)
@@ -2260,41 +2397,91 @@
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[[01]] | aix4.[[01]].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a[(]lib.so.V[)]'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
shlibpath_var=LIBPATH
fi
;;
@@ -2304,18 +2491,18 @@
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
- library_names_spec='${libname}${shared_ext}'
+ library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
@@ -2323,8 +2510,8 @@
bsdi[[45]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -2336,7 +2523,7 @@
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
- shrext_cmds=".dll"
+ shrext_cmds=.dll
need_version=no
need_lib_prefix=no
@@ -2345,8 +2532,8 @@
# gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
@@ -2362,17 +2549,17 @@
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
m4_if([$1], [],[
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
esac
dynamic_linker='Win32 ld.exe'
@@ -2381,8 +2568,8 @@
*,cl*)
# Native MSVC
libname_spec='$name'
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- library_names_spec='${libname}.dll.lib'
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
case $build_os in
mingw*)
@@ -2409,7 +2596,7 @@
sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
;;
*)
- sys_lib_search_path_spec="$LIB"
+ sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
# It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -2422,8 +2609,8 @@
esac
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
@@ -2436,7 +2623,7 @@
*)
# Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
dynamic_linker='Win32 ld.exe'
;;
esac
@@ -2449,8 +2636,8 @@
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -2463,8 +2650,8 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -2482,12 +2669,13 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
@@ -2512,26 +2700,15 @@
esac
;;
-gnu*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
@@ -2549,14 +2726,15 @@
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
@@ -2564,8 +2742,8 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
@@ -2574,8 +2752,8 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -2588,8 +2766,8 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -2600,7 +2778,7 @@
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
@@ -2608,8 +2786,8 @@
esac
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
@@ -2628,8 +2806,8 @@
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
@@ -2638,13 +2816,33 @@
dynamic_linker=no
;;
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ ;;
+
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -2669,7 +2867,12 @@
# before this can be enabled.
hardcode_into_libs=yes
- # Append ld.so.conf contents to the search path
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
@@ -2689,12 +2892,12 @@
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
@@ -2704,7 +2907,7 @@
newsos6)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
@@ -2713,58 +2916,68 @@
version_type=qnx
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='ldqnx.so'
;;
-openbsd*)
+openbsd* | bitrig*)
version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
+ else
+ need_version=yes
+ fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[[89]] | openbsd2.[[89]].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
+ shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
- shrext_cmds=".dll"
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
@@ -2775,8 +2988,8 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
@@ -2786,11 +2999,11 @@
sunos4*)
version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
@@ -2798,8 +3011,8 @@
sysv4 | sysv4.3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
@@ -2820,24 +3033,24 @@
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
+ version_type=sco
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -2855,7 +3068,7 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
@@ -2863,8 +3076,8 @@
uts4*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -2873,20 +3086,30 @@
;;
esac
AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
_LT_DECL([], [variables_saved_for_relink], [1],
[Variables whose values should be saved in libtool wrapper scripts and
restored at link time])
@@ -2919,39 +3142,41 @@
[Whether we should hardcode library paths into libraries])
_LT_DECL([], [sys_lib_search_path_spec], [2],
[Compile-time system search path for libraries])
-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
- [Run-time system search path for libraries])
+_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2],
+ [Detected run-time system search path for libraries])
+_LT_DECL([], [configure_time_lt_sys_library_path], [2],
+ [Explicit LT_SYS_LIBRARY_PATH set during ./configure time])
])# _LT_SYS_DYNAMIC_LINKER
# _LT_PATH_TOOL_PREFIX(TOOL)
# --------------------------
-# find a file program which can recognize shared library
+# find a file program that can recognize shared library
AC_DEFUN([_LT_PATH_TOOL_PREFIX],
[m4_require([_LT_DECL_EGREP])dnl
AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
[[\\/*] | ?:[\\/]*])
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word. This closes a longstanding sh security hole.
ac_dummy="m4_if([$2], , $PATH, [$2])"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -f "$ac_dir/$1"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
@@ -2974,11 +3199,11 @@
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
AC_MSG_RESULT($MAGIC_CMD)
else
@@ -2996,7 +3221,7 @@
# _LT_PATH_MAGIC
# --------------
-# find a file program which can recognize a shared library
+# find a file program that can recognize a shared library
m4_defun([_LT_PATH_MAGIC],
[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
@@ -3023,16 +3248,16 @@
AC_ARG_WITH([gnu-ld],
[AS_HELP_STRING([--with-gnu-ld],
[assume the C compiler uses GNU ld @<:@default=no@:>@])],
- [test "$withval" = no || with_gnu_ld=yes],
+ [test no = "$withval" || with_gnu_ld=yes],
[with_gnu_ld=no])dnl
ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by $CC])
case $host in
*-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
+ # gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -3046,7 +3271,7 @@
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
- test -z "$LD" && LD="$ac_prog"
+ test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
@@ -3057,37 +3282,37 @@
with_gnu_ld=unknown
;;
esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(lt_cv_path_LD,
[if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
+ test no != "$with_gnu_ld" && break
;;
*)
- test "$with_gnu_ld" != yes && break
+ test yes != "$with_gnu_ld" && break
;;
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
fi])
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
@@ -3141,13 +3366,13 @@
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
reload_cmds=false
fi
;;
darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ if test yes = "$GCC"; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
@@ -3158,6 +3383,43 @@
])# _LT_CMD_RELOAD
+# _LT_PATH_DD
+# -----------
+# find a working dd
+m4_defun([_LT_PATH_DD],
+[AC_CACHE_CHECK([for a working dd], [ac_cv_path_lt_DD],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd],
+[if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi])
+rm -f conftest.i conftest2.i conftest.out])
+])# _LT_PATH_DD
+
+
+# _LT_CMD_TRUNCATE
+# ----------------
+# find command to truncate a binary pipe
+m4_defun([_LT_CMD_TRUNCATE],
+[m4_require([_LT_PATH_DD])
+AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"])
+_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1],
+ [Command to truncate a binary pipe])
+])# _LT_CMD_TRUNCATE
+
+
# _LT_CHECK_MAGIC_METHOD
# ----------------------
# how to check for library dependencies
@@ -3173,13 +3435,13 @@
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
case $host_os in
aix[[4-9]]*)
@@ -3206,8 +3468,7 @@
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
- if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ if ( file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
@@ -3243,10 +3504,6 @@
fi
;;
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
haiku*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -3285,7 +3542,7 @@
;;
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -3307,8 +3564,8 @@
lt_cv_deplibs_check_method=pass_all
;;
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
@@ -3361,6 +3618,9 @@
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
])
@@ -3401,33 +3661,38 @@
AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
- lt_cv_path_NM="$NM"
+ lt_cv_path_NM=$NM
else
- lt_nm_to_check="${ac_tool_prefix}nm"
+ lt_nm_to_check=${ac_tool_prefix}nm
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
# Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
- break
+ break 2
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
- break
+ break 2
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
@@ -3438,21 +3703,21 @@
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
done
: ${lt_cv_path_NM=no}
fi])
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
else
# Didn't find any BSD compatible name lister, look for dumpbin.
if test -n "$DUMPBIN"; then :
# Let the user override the test.
else
AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
- case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
*COFF*)
- DUMPBIN="$DUMPBIN -symbols"
+ DUMPBIN="$DUMPBIN -symbols -headers"
;;
*)
DUMPBIN=:
@@ -3460,8 +3725,8 @@
esac
fi
AC_SUBST([DUMPBIN])
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
fi
fi
test -z "$NM" && NM=nm
@@ -3507,8 +3772,8 @@
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- # two different shell functions defined in ltmain.sh
- # decide which to use based on capabilities of $DLLTOOL
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
case `$DLLTOOL --help 2>&1` in
*--identify-strict*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
@@ -3520,7 +3785,7 @@
;;
*)
# fallback: assume linklib IS sharedlib
- lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
;;
esac
])
@@ -3547,13 +3812,28 @@
lt_cv_path_mainfest_tool=yes
fi
rm -f conftest*])
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
MANIFEST_TOOL=:
fi
_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
])# _LT_PATH_MANIFEST_TOOL
+# _LT_DLL_DEF_P([FILE])
+# ---------------------
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with func_dll_def_p in the libtool script
+AC_DEFUN([_LT_DLL_DEF_P],
+[dnl
+ test DEF = "`$SED -n dnl
+ -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace
+ -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments
+ -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl
+ -e q dnl Only consider the first "real" line
+ $1`" dnl
+])# _LT_DLL_DEF_P
+
+
# LT_LIB_M
# --------
# check for math library
@@ -3565,11 +3845,11 @@
# These system don't have libm, or don't need it
;;
*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
;;
*)
- AC_CHECK_LIB(m, cos, LIBM="-lm")
+ AC_CHECK_LIB(m, cos, LIBM=-lm)
;;
esac
AC_SUBST([LIBM])
@@ -3588,7 +3868,7 @@
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $cc_basename in
nvcc*)
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
@@ -3640,7 +3920,7 @@
symcode='[[ABCDGISTW]]'
;;
hpux*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
symcode='[[ABCDEGRST]]'
fi
;;
@@ -3673,14 +3953,44 @@
symcode='[[ABCDGIRSTW]]' ;;
esac
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
@@ -3698,21 +4008,24 @@
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
# Also find C++ and __fastcall symbols from MSVC++,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK ['"\
" {last_section=section; section=\$ 3};"\
" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx]"
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
@@ -3752,11 +4065,11 @@
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT@&t@_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT@&t@_DLSYM_CONST
#else
@@ -3782,7 +4095,7 @@
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
@@ -3802,9 +4115,9 @@
mv conftest.$ac_objext conftstm.$ac_objext
lt_globsym_save_LIBS=$LIBS
lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
+ LIBS=conftstm.$ac_objext
CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
pipe_works=yes
fi
LIBS=$lt_globsym_save_LIBS
@@ -3825,7 +4138,7 @@
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
+ if test yes = "$pipe_works"; then
break
else
lt_cv_sys_global_symbol_pipe=
@@ -3852,12 +4165,16 @@
[Take the output of nm and produce a listing of raw symbols and C names])
_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
[Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1],
+ [Transform the output of nm into a list of symbols to manually relocate])
_LT_DECL([global_symbol_to_c_name_address],
[lt_cv_sys_global_symbol_to_c_name_address], [1],
[Transform the output of nm in a C name address pair])
_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
[lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
[Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([nm_interface], [lt_cv_nm_interface], [1],
+ [The name lister interface])
_LT_DECL([], [nm_file_list_spec], [1],
[Specify filename containing input files for $NM])
]) # _LT_CMD_GLOBAL_SYMBOLS
@@ -3873,17 +4190,18 @@
m4_if([$1], [CXX], [
# C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
@@ -3894,8 +4212,8 @@
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
@@ -3911,6 +4229,11 @@
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
# PIC is the default on this platform
@@ -3960,7 +4283,7 @@
case $host_os in
aix[[4-9]]*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
@@ -4001,14 +4324,14 @@
case $cc_basename in
CC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+ if test ia64 != "$host_cpu"; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
fi
;;
aCC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
@@ -4037,7 +4360,7 @@
;;
esac
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# KAI C++ Compiler
@@ -4045,7 +4368,7 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
ecpc* )
- # old Intel C++ for x86_64 which still supported -KPIC.
+ # old Intel C++ for x86_64, which still supported -KPIC.
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
@@ -4190,17 +4513,18 @@
fi
],
[
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
@@ -4211,8 +4535,8 @@
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
@@ -4229,6 +4553,11 @@
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
@@ -4299,7 +4628,7 @@
case $host_os in
aix*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
@@ -4307,11 +4636,30 @@
fi
;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
hpux9* | hpux10* | hpux11*)
@@ -4327,7 +4675,7 @@
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
@@ -4336,9 +4684,9 @@
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
+ # old Intel for x86_64, which still supported -KPIC.
ecc*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
@@ -4363,6 +4711,12 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
@@ -4460,7 +4814,7 @@
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
@@ -4489,7 +4843,7 @@
fi
])
case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
+ # For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
@@ -4555,17 +4909,21 @@
case $host_os in
aix[[4-9]]*)
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global defined
- # symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
- _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+ _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
;;
cygwin* | mingw* | cegcc*)
case $cc_basename in
@@ -4611,9 +4969,9 @@
# included in the symbol list
_LT_TAGVAR(include_expsyms, $1)=
# exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
_LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
@@ -4629,7 +4987,7 @@
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
with_gnu_ld=no
fi
;;
@@ -4637,7 +4995,7 @@
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
- openbsd*)
+ openbsd* | bitrig*)
with_gnu_ld=no
;;
esac
@@ -4647,7 +5005,7 @@
# On some targets, GNU ld is compatible enough with the native linker
# that we're better off using the native interface for both.
lt_use_gnu_ld_interface=no
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
case $host_os in
aix*)
# The AIX port of GNU ld has always aspired to compatibility
@@ -4669,24 +5027,24 @@
esac
fi
- if test "$lt_use_gnu_ld_interface" = yes; then
+ if test yes = "$lt_use_gnu_ld_interface"; then
# If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
+ wlarc='$wl'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
supports_anon_versioning=no
- case `$LD -v 2>&1` in
+ case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
*GNU\ gold*) supports_anon_versioning=yes ;;
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -4699,7 +5057,7 @@
case $host_os in
aix[[3-9]]*)
# On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
+ if test ia64 != "$host_cpu"; then
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
@@ -4718,7 +5076,7 @@
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
@@ -4734,7 +5092,7 @@
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -4744,7 +5102,7 @@
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
@@ -4752,61 +5110,89 @@
_LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
haiku*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
+ if test linux-dietlibc = "$host_os"; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
+ && test no = "$tmp_diet"
then
tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group f77 and f90 compilers
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
@@ -4817,42 +5203,47 @@
lf95*) # Lahey Fortran 8.1
_LT_TAGVAR(whole_archive_flag_spec, $1)=
tmp_sharedflag='--shared' ;;
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
nvcc*) # Cuda Compiler Driver 2.2
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
- _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
+ tcc*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
+ ;;
xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
_LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
@@ -4866,8 +5257,8 @@
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
@@ -4885,8 +5276,8 @@
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -4898,7 +5289,7 @@
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
@@ -4913,9 +5304,9 @@
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -4932,15 +5323,15 @@
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
- if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+ if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
runpath_var=
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
@@ -4956,7 +5347,7 @@
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
_LT_TAGVAR(hardcode_direct, $1)=unsupported
@@ -4964,34 +5355,57 @@
;;
aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global
- # defined symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
aix_use_runtimelinking=yes
break
fi
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
@@ -5010,13 +5424,21 @@
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
@@ -5035,61 +5457,80 @@
;;
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
_LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
@@ -5098,7 +5539,7 @@
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
@@ -5128,16 +5569,17 @@
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
@@ -5146,18 +5588,18 @@
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# Assume MSVC wrapper
@@ -5166,7 +5608,7 @@
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
@@ -5216,33 +5658,33 @@
;;
hpux9*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
@@ -5250,25 +5692,25 @@
;;
hpux11*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ if test yes,no = "$GCC,$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
m4_if($1, [], [
@@ -5276,14 +5718,14 @@
# (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
_LT_LINKER_OPTION([if $CC understands -b],
_LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
- [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
[_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
- [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
;;
esac
fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
@@ -5294,7 +5736,7 @@
*)
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
@@ -5305,16 +5747,16 @@
;;
irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
# This should be the same for all languages, so no per-tag cache variable.
AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
[lt_cv_irix_exported_symbol],
- [save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ [save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
AC_LINK_IFELSE(
[AC_LANG_SOURCE(
[AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
@@ -5327,21 +5769,31 @@
end]])])],
[lt_cv_irix_exported_symbol=yes],
[lt_cv_irix_exported_symbol=no])
- LDFLAGS="$save_LDFLAGS"])
- if test "$lt_cv_irix_exported_symbol" = yes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ LDFLAGS=$save_LDFLAGS])
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
fi
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
@@ -5356,7 +5808,7 @@
newsos6)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
@@ -5364,27 +5816,19 @@
*nto* | *qnx*)
;;
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
fi
else
_LT_TAGVAR(ld_shlibs, $1)=no
@@ -5395,33 +5839,53 @@
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
osf3*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -5432,24 +5896,24 @@
solaris*)
_LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
- _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
@@ -5459,11 +5923,11 @@
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
fi
@@ -5473,10 +5937,10 @@
;;
sunos4*)
- if test "x$host_vendor" = xsequent; then
+ if test sequent = "$host_vendor"; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
@@ -5525,43 +5989,43 @@
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
@@ -5576,17 +6040,17 @@
;;
esac
- if test x$host_vendor = xsni; then
+ if test sni = "$host_vendor"; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
;;
esac
fi
fi
])
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
@@ -5603,7 +6067,7 @@
# Assume -lc should be added
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- if test "$enable_shared" = yes && test "$GCC" = yes; then
+ if test yes,yes = "$GCC,$enable_shared"; then
case $_LT_TAGVAR(archive_cmds, $1) in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
@@ -5683,12 +6147,12 @@
_LT_TAGDECL([], [hardcode_libdir_separator], [1],
[Whether we need a single "-rpath" flag with a separated argument])
_LT_TAGDECL([], [hardcode_direct], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary])
_LT_TAGDECL([], [hardcode_direct_absolute], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary and the resulting library dependency is
- "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ "absolute", i.e impossible to change by setting $shlibpath_var if the
library is relocated])
_LT_TAGDECL([], [hardcode_minus_L], [0],
[Set to "yes" if using the -LDIR flag during linking hardcodes DIR
@@ -5729,10 +6193,10 @@
# ------------------------
# Ensure that the configuration variables for a C compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_C_CONFIG],
[m4_require([_LT_DECL_EGREP])dnl
-lt_save_CC="$CC"
+lt_save_CC=$CC
AC_LANG_PUSH(C)
# Source file extension for C test sources.
@@ -5772,18 +6236,18 @@
LT_SYS_DLOPEN_SELF
_LT_CMD_STRIPLIB
- # Report which library types will actually be built
+ # Report what library types will actually be built
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
@@ -5791,8 +6255,12 @@
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -5800,13 +6268,13 @@
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_CONFIG($1)
fi
AC_LANG_POP
-CC="$lt_save_CC"
+CC=$lt_save_CC
])# _LT_LANG_C_CONFIG
@@ -5814,14 +6282,14 @@
# --------------------------
# Ensure that the configuration variables for a C++ compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_CXX_CONFIG],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_PATH_MANIFEST_TOOL])dnl
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
+if test -n "$CXX" && ( test no != "$CXX" &&
+ ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+ (test g++ != "$CXX"))); then
AC_PROG_CXXCPP
else
_lt_caught_CXX_error=yes
@@ -5863,7 +6331,7 @@
# the CXX compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
+if test yes != "$_lt_caught_CXX_error"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
@@ -5905,35 +6373,35 @@
if test -n "$compiler"; then
# We don't want -fno-exception when compiling C++ code, so set the
# no_builtin_flag separately
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
else
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
fi
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
# Set up default GNU C++ configuration
LT_PATH_LD
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ if test yes = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# If archive_cmds runs LD, not CC, wlarc should be empty
# XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
# investigate it a little bit more. (MM)
- wlarc='${wl}'
+ wlarc='$wl'
# ancient GNU ld didn't support --whole-archive et. al.
if eval "`$CC -print-prog-name=ld` --help 2>&1" |
$GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
@@ -5969,18 +6437,30 @@
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
case $ld_flag in
@@ -5990,6 +6470,13 @@
;;
esac
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
@@ -6008,13 +6495,21 @@
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
@@ -6032,64 +6527,84 @@
fi
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag=$shared_flag' $wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to
# export.
_LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # The "-G" linker flag allows undefined symbols.
+ _LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
# Determine the default libpath from the value encoded in an empty
# executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared
- # libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared
+ # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
@@ -6099,7 +6614,7 @@
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -6127,57 +6642,58 @@
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- func_to_tool_file "$lt_outputfile"~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# g++
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -6188,6 +6704,34 @@
_LT_DARWIN_LINKER_FEATURES($1)
;;
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
dgux*)
case $cc_basename in
ec++*)
@@ -6222,18 +6766,15 @@
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
- gnu*)
- ;;
-
haiku*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
hpux9*)
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
# but as the default
@@ -6245,7 +6786,7 @@
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
@@ -6254,11 +6795,11 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GXX"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
@@ -6268,15 +6809,15 @@
;;
hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
hppa*64*|ia64*)
;;
*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
esac
fi
@@ -6302,13 +6843,13 @@
aCC*)
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
# Commands to make compiler produce verbose output that lists
@@ -6319,20 +6860,20 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
fi
@@ -6347,22 +6888,22 @@
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
irix5* | irix6*)
case $cc_basename in
CC*)
# SGI C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
@@ -6371,22 +6912,22 @@
_LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
;;
*)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
fi
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -6394,8 +6935,8 @@
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
@@ -6404,10 +6945,10 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# Archives containing C++ object files must be created using
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
@@ -6421,59 +6962,59 @@
# earlier do not add the objects themselves.
case `$CC -V 2>&1` in
*"Version 7."*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 8.0 or newer
tmp_idyn=
case $host_cpu in
ia64*) tmp_idyn=' -i_dynamic';;
esac
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
;;
pgCC* | pgcpp*)
# Portland Group C++ compiler
case `$CC -V` in
*pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
_LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
- compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
_LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
- $RANLIB $oldlib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
_LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 6 and above use weak symbols
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
;;
cxx*)
# Compaq C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols'
runpath_var=LD_RUN_PATH
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -6487,18 +7028,18 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
;;
xl* | mpixl* | bgxl*)
# IBM XL 8.0 on PPC, with GNU ld
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
;;
*)
@@ -6506,10 +7047,10 @@
*Sun\ C*)
# Sun C++ 5.9
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
# Not sure whether something based on
@@ -6567,22 +7108,17 @@
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
fi
output_verbose_link_cmd=func_echo_all
else
@@ -6598,9 +7134,9 @@
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Archives containing C++ object files must be created using
@@ -6618,17 +7154,17 @@
cxx*)
case $host in
osf3*)
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
;;
*)
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
- $RM $lib.exp'
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+ $RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
;;
esac
@@ -6643,21 +7179,21 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
case $host in
osf3*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
@@ -6703,9 +7239,9 @@
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(archive_cmds_need_lc,$1)=yes
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -6713,7 +7249,7 @@
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
+ # but understands '-z linker_flag'.
# Supported since Solaris 2.6 (maybe 2.5.1?)
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
;;
@@ -6730,30 +7266,30 @@
;;
gcx*)
# Green Hills C++ Compiler
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
# The C++ compiler must be used to create the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
;;
*)
# GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
if $CC --version | $GREP -v '^2\.7' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # g++ 2.7 appears to require '-G' NOT '-shared' on this
# platform.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
@@ -6761,11 +7297,11 @@
output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
;;
esac
fi
@@ -6774,52 +7310,52 @@
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
- '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
_LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
- '"$_LT_TAGVAR(reload_cmds, $1)"
+ '"$_LT_TAGVAR(reload_cmds, $1)"
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
@@ -6850,10 +7386,10 @@
esac
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
- test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+ test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
- _LT_TAGVAR(GCC, $1)="$GXX"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$GXX
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -6880,7 +7416,7 @@
lt_cv_path_LD=$lt_save_path_LD
lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
+fi # test yes != "$_lt_caught_CXX_error"
AC_LANG_POP
])# _LT_LANG_CXX_CONFIG
@@ -6902,13 +7438,14 @@
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
func_stripname_cnf ()
{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ case @S|@2 in
+ .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
+ *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
esac
} # func_stripname_cnf
])# _LT_FUNC_STRIPNAME_CNF
+
# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
# Figure out "hidden" library dependencies from verbose
@@ -6992,13 +7529,13 @@
pre_test_object_deps_done=no
for p in `eval "$output_verbose_link_cmd"`; do
- case ${prev}${p} in
+ case $prev$p in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
# Remove the space.
- if test $p = "-L" ||
- test $p = "-R"; then
+ if test x-L = "$p" ||
+ test x-R = "$p"; then
prev=$p
continue
fi
@@ -7014,16 +7551,16 @@
case $p in
=*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
esac
- if test "$pre_test_object_deps_done" = no; then
- case ${prev} in
+ if test no = "$pre_test_object_deps_done"; then
+ case $prev in
-L | -R)
# Internal compiler library paths should come after those
# provided the user. The postdeps already come after the
# user supplied libs so there is no need to process them.
if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
else
- _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
fi
;;
# The "-l" case would never come before the object being
@@ -7031,9 +7568,9 @@
esac
else
if test -z "$_LT_TAGVAR(postdeps, $1)"; then
- _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ _LT_TAGVAR(postdeps, $1)=$prev$p
else
- _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
fi
fi
prev=
@@ -7048,15 +7585,15 @@
continue
fi
- if test "$pre_test_object_deps_done" = no; then
+ if test no = "$pre_test_object_deps_done"; then
if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
- _LT_TAGVAR(predep_objects, $1)="$p"
+ _LT_TAGVAR(predep_objects, $1)=$p
else
_LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
fi
else
if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
- _LT_TAGVAR(postdep_objects, $1)="$p"
+ _LT_TAGVAR(postdep_objects, $1)=$p
else
_LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
fi
@@ -7087,51 +7624,6 @@
_LT_TAGVAR(postdep_objects,$1)=
_LT_TAGVAR(postdeps,$1)=
;;
-
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
-
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-
-solaris*)
- case $cc_basename in
- CC* | sunCC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
esac
])
@@ -7140,7 +7632,7 @@
esac
_LT_TAGVAR(compiler_lib_search_dirs, $1)=
if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
fi
_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
[The directories searched by this compiler when creating a shared library])
@@ -7160,10 +7652,10 @@
# --------------------------
# Ensure that the configuration variables for a Fortran 77 compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_F77_CONFIG],
[AC_LANG_PUSH(Fortran 77)
-if test -z "$F77" || test "X$F77" = "Xno"; then
+if test -z "$F77" || test no = "$F77"; then
_lt_disable_F77=yes
fi
@@ -7200,7 +7692,7 @@
# the F77 compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
+if test yes != "$_lt_disable_F77"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
@@ -7222,7 +7714,7 @@
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
+ lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${F77-"f77"}
@@ -7236,21 +7728,25 @@
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -7258,11 +7754,11 @@
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
- _LT_TAGVAR(GCC, $1)="$G77"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$G77
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -7279,9 +7775,9 @@
fi # test -n "$compiler"
GCC=$lt_save_GCC
- CC="$lt_save_CC"
- CFLAGS="$lt_save_CFLAGS"
-fi # test "$_lt_disable_F77" != yes
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_F77"
AC_LANG_POP
])# _LT_LANG_F77_CONFIG
@@ -7291,11 +7787,11 @@
# -------------------------
# Ensure that the configuration variables for a Fortran compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_FC_CONFIG],
[AC_LANG_PUSH(Fortran)
-if test -z "$FC" || test "X$FC" = "Xno"; then
+if test -z "$FC" || test no = "$FC"; then
_lt_disable_FC=yes
fi
@@ -7332,7 +7828,7 @@
# the FC compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
+if test yes != "$_lt_disable_FC"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
@@ -7354,7 +7850,7 @@
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
+ lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${FC-"f95"}
@@ -7370,21 +7866,25 @@
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -7392,11 +7892,11 @@
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
- _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -7416,7 +7916,7 @@
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
-fi # test "$_lt_disable_FC" != yes
+fi # test yes != "$_lt_disable_FC"
AC_LANG_POP
])# _LT_LANG_FC_CONFIG
@@ -7426,7 +7926,7 @@
# --------------------------
# Ensure that the configuration variables for the GNU Java Compiler compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GCJ_CONFIG],
[AC_REQUIRE([LT_PROG_GCJ])dnl
AC_LANG_SAVE
@@ -7460,7 +7960,7 @@
CFLAGS=$GCJFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
+_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# GCJ did not exist at the time GCC didn't implicitly link libc in.
@@ -7497,7 +7997,7 @@
# --------------------------
# Ensure that the configuration variables for the GNU Go compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GO_CONFIG],
[AC_REQUIRE([LT_PROG_GO])dnl
AC_LANG_SAVE
@@ -7531,7 +8031,7 @@
CFLAGS=$GOFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
+_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# Go did not exist at the time GCC didn't implicitly link libc in.
@@ -7568,7 +8068,7 @@
# -------------------------
# Ensure that the configuration variables for the Windows resource compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_RC_CONFIG],
[AC_REQUIRE([LT_PROG_RC])dnl
AC_LANG_SAVE
@@ -7584,7 +8084,7 @@
lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
+lt_simple_link_test_code=$lt_simple_compile_test_code
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
@@ -7594,7 +8094,7 @@
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
+lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=
@@ -7623,7 +8123,7 @@
[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
[m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
[AC_CHECK_TOOL(GCJ, gcj,)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
AC_SUBST(GCJFLAGS)])])[]dnl
])
@@ -7734,7 +8234,7 @@
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
+ test ! -f "$lt_ac_sed" && continue
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
@@ -7751,9 +8251,9 @@
$lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
cmp -s conftest.out conftest.nl || break
# 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
+ test 10 -lt "$lt_ac_count" && break
lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
+ if test "$lt_ac_count" -gt "$lt_ac_max"; then
lt_ac_max=$lt_ac_count
lt_cv_path_SED=$lt_ac_sed
fi
@@ -7777,27 +8277,7 @@
# Find out whether the shell is Bourne or XSI compatible,
# or has some other useful features.
m4_defun([_LT_CHECK_SHELL_FEATURES],
-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-AC_MSG_RESULT([$xsi_shell])
-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
-
-AC_MSG_CHECKING([whether the shell understands "+="])
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-AC_MSG_RESULT([$lt_shell_append])
-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
lt_unset=false
@@ -7821,102 +8301,9 @@
])# _LT_CHECK_SHELL_FEATURES
-# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
-# ------------------------------------------------------
-# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
-# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
-m4_defun([_LT_PROG_FUNCTION_REPLACE],
-[dnl {
-sed -e '/^$1 ()$/,/^} # $1 /c\
-$1 ()\
-{\
-m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
-} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-])
-
-
-# _LT_PROG_REPLACE_SHELLFNS
-# -------------------------
-# Replace existing portable implementations of several shell functions with
-# equivalent extended shell implementations where those features are available..
-m4_defun([_LT_PROG_REPLACE_SHELLFNS],
-[if test x"$xsi_shell" = xyes; then
- _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac])
-
- _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
- func_basename_result="${1##*/}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
- func_basename_result="${1##*/}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
- # positional parameters, so assign one to ordinary parameter first.
- func_stripname_result=${3}
- func_stripname_result=${func_stripname_result#"${1}"}
- func_stripname_result=${func_stripname_result%"${2}"}])
-
- _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
- func_split_long_opt_name=${1%%=*}
- func_split_long_opt_arg=${1#*=}])
-
- _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
- func_split_short_opt_arg=${1#??}
- func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
-
- _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
- case ${1} in
- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
- *) func_lo2o_result=${1} ;;
- esac])
-
- _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
-
- _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
-
- _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
-fi
-
-if test x"$lt_shell_append" = xyes; then
- _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
- func_quote_for_eval "${2}"
-dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
- eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
-
- # Save a `func_append' function call where possible by direct use of '+='
- sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-else
- # Save a `func_append' function call even when '+=' is not available
- sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
- AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
-fi
-])
-
# _LT_PATH_CONVERSION_FUNCTIONS
# -----------------------------
-# Determine which file name conversion functions should be used by
+# Determine what file name conversion functions should be used by
# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
# for certain cross-compile configurations and native mingw.
m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
diff --git a/dist/m4/ltoptions.m4 b/dist/m4/ltoptions.m4
index 5d9acd8..94b0829 100644
--- a/dist/m4/ltoptions.m4
+++ b/dist/m4/ltoptions.m4
@@ -1,14 +1,14 @@
# Helper functions for option handling. -*- Autoconf -*-
#
-# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# serial 7 ltoptions.m4
+# serial 8 ltoptions.m4
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
@@ -29,7 +29,7 @@
[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
_LT_MANGLE_DEFUN([$1], [$2]),
- [m4_warning([Unknown $1 option `$2'])])[]dnl
+ [m4_warning([Unknown $1 option '$2'])])[]dnl
])
@@ -75,13 +75,15 @@
dnl
dnl If no reference was made to various pairs of opposing options, then
dnl we run the default mode handler for the pair. For example, if neither
- dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl 'shared' nor 'disable-shared' was passed, we enable building of shared
dnl archives by default:
_LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
_LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
_LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
_LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
- [_LT_ENABLE_FAST_INSTALL])
+ [_LT_ENABLE_FAST_INSTALL])
+ _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4],
+ [_LT_WITH_AIX_SONAME([aix])])
])
])# _LT_SET_OPTIONS
@@ -112,7 +114,7 @@
[_LT_SET_OPTION([LT_INIT], [dlopen])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `dlopen' option into LT_INIT's first parameter.])
+put the 'dlopen' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
@@ -148,7 +150,7 @@
_LT_SET_OPTION([LT_INIT], [win32-dll])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `win32-dll' option into LT_INIT's first parameter.])
+put the 'win32-dll' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
@@ -157,9 +159,9 @@
# _LT_ENABLE_SHARED([DEFAULT])
# ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-shared flag, and supports the 'shared' and
+# 'disable-shared' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_SHARED],
[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([shared],
@@ -172,14 +174,14 @@
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
@@ -211,9 +213,9 @@
# _LT_ENABLE_STATIC([DEFAULT])
# ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-static flag, and support the 'static' and
+# 'disable-static' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_STATIC],
[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([static],
@@ -226,14 +228,14 @@
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_static=]_LT_ENABLE_STATIC_DEFAULT)
@@ -265,9 +267,9 @@
# _LT_ENABLE_FAST_INSTALL([DEFAULT])
# ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-fast-install flag, and support the 'fast-install'
+# and 'disable-fast-install' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_FAST_INSTALL],
[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([fast-install],
@@ -280,14 +282,14 @@
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
@@ -304,14 +306,14 @@
[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `fast-install' option into LT_INIT's first parameter.])
+the 'fast-install' option into LT_INIT's first parameter.])
])
AU_DEFUN([AC_DISABLE_FAST_INSTALL],
[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `disable-fast-install' option into LT_INIT's first parameter.])
+the 'disable-fast-install' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
@@ -319,11 +321,64 @@
dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+# _LT_WITH_AIX_SONAME([DEFAULT])
+# ----------------------------------
+# implement the --with-aix-soname flag, and support the `aix-soname=aix'
+# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT
+# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'.
+m4_define([_LT_WITH_AIX_SONAME],
+[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl
+shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[[5-9]]*,yes)
+ AC_MSG_CHECKING([which variant of shared library versioning to provide])
+ AC_ARG_WITH([aix-soname],
+ [AS_HELP_STRING([--with-aix-soname=aix|svr4|both],
+ [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])],
+ [case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ AC_MSG_ERROR([Unknown argument to --with-aix-soname])
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname],
+ [AC_CACHE_VAL([lt_cv_with_aix_soname],
+ [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT)
+ with_aix_soname=$lt_cv_with_aix_soname])
+ AC_MSG_RESULT([$with_aix_soname])
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+_LT_DECL([], [shared_archive_member_spec], [0],
+ [Shared archive member basename, for filename based shared library versioning on AIX])dnl
+])# _LT_WITH_AIX_SONAME
+
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])])
+
+
# _LT_WITH_PIC([MODE])
# --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# implement the --with-pic flag, and support the 'pic-only' and 'no-pic'
# LT_INIT options.
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'.
m4_define([_LT_WITH_PIC],
[AC_ARG_WITH([pic],
[AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
@@ -334,19 +389,17 @@
*)
pic_mode=default
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for lt_pkg in $withval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$lt_pkg" = "X$lt_p"; then
pic_mode=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
- [pic_mode=default])
-
-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+ [pic_mode=m4_default([$1], [default])])
_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
])# _LT_WITH_PIC
@@ -359,7 +412,7 @@
[_LT_SET_OPTION([LT_INIT], [pic-only])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `pic-only' option into LT_INIT's first parameter.])
+put the 'pic-only' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
diff --git a/dist/m4/ltsugar.m4 b/dist/m4/ltsugar.m4
index 9000a05..48bc934 100644
--- a/dist/m4/ltsugar.m4
+++ b/dist/m4/ltsugar.m4
@@ -1,6 +1,7 @@
# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
@@ -33,7 +34,7 @@
# ------------
# Manipulate m4 lists.
# These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
+# Autoconf-2.59, which quotes differently.
m4_define([lt_car], [[$1]])
m4_define([lt_cdr],
[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
@@ -44,7 +45,7 @@
# lt_append(MACRO-NAME, STRING, [SEPARATOR])
# ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'.
# Note that neither SEPARATOR nor STRING are expanded; they are appended
# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
# No SEPARATOR is output if MACRO-NAME was previously undefined (different
diff --git a/dist/m4/ltversion.m4 b/dist/m4/ltversion.m4
index 07a8602..fa04b52 100644
--- a/dist/m4/ltversion.m4
+++ b/dist/m4/ltversion.m4
@@ -1,6 +1,6 @@
# ltversion.m4 -- version numbers -*- Autoconf -*-
#
-# Copyright (C) 2004 Free Software Foundation, Inc.
+# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc.
# Written by Scott James Remnant, 2004
#
# This file is free software; the Free Software Foundation gives
@@ -9,15 +9,15 @@
# @configure_input@
-# serial 3337 ltversion.m4
+# serial 4179 ltversion.m4
# This file is part of GNU Libtool
-m4_define([LT_PACKAGE_VERSION], [2.4.2])
-m4_define([LT_PACKAGE_REVISION], [1.3337])
+m4_define([LT_PACKAGE_VERSION], [2.4.6])
+m4_define([LT_PACKAGE_REVISION], [2.4.6])
AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.4.2'
-macro_revision='1.3337'
+[macro_version='2.4.6'
+macro_revision='2.4.6'
_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
_LT_DECL(, macro_revision, 0)
])
diff --git a/dist/m4/lt~obsolete.m4 b/dist/m4/lt~obsolete.m4
index c573da9..c6b26f8 100644
--- a/dist/m4/lt~obsolete.m4
+++ b/dist/m4/lt~obsolete.m4
@@ -1,6 +1,7 @@
# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Scott James Remnant, 2004.
#
# This file is free software; the Free Software Foundation gives
@@ -11,7 +12,7 @@
# These exist entirely to fool aclocal when bootstrapping libtool.
#
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN),
# which have later been changed to m4_define as they aren't part of the
# exported API, or moved to Autoconf or Automake where they belong.
#
@@ -25,7 +26,7 @@
# included after everything else. This provides aclocal with the
# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
# because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
#
# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
# Yes, that means every name once taken will need to remain here until
diff --git a/dist/makevp_c.txt b/dist/makevp_c.txt
index e5898c5..5648115 100644
--- a/dist/makevp_c.txt
+++ b/dist/makevp_c.txt
@@ -1,21 +1,21 @@
-pcre_byte_order.c
-pcre_chartables.c
-pcre_compile.c
-pcre_config.c
-pcre_dfa_exec.c
-pcre_exec.c
-pcre_fullinfo.c
-pcre_get.c
-pcre_globals.c
-pcre_jit_compile.c
-pcre_maketables.c
-pcre_newline.c
-pcre_ord2utf8.c
-pcre_refcount.c
-pcre_string_utils.c
-pcre_study.c
-pcre_tables.c
-pcre_ucd.c
-pcre_valid_utf8.c
-pcre_version.c
-pcre_xclass.c
+pcre_byte_order.c
+pcre_chartables.c
+pcre_compile.c
+pcre_config.c
+pcre_dfa_exec.c
+pcre_exec.c
+pcre_fullinfo.c
+pcre_get.c
+pcre_globals.c
+pcre_jit_compile.c
+pcre_maketables.c
+pcre_newline.c
+pcre_ord2utf8.c
+pcre_refcount.c
+pcre_string_utils.c
+pcre_study.c
+pcre_tables.c
+pcre_ucd.c
+pcre_valid_utf8.c
+pcre_version.c
+pcre_xclass.c
diff --git a/dist/makevp_l.txt b/dist/makevp_l.txt
index 23e1975..9b071e0 100644
--- a/dist/makevp_l.txt
+++ b/dist/makevp_l.txt
@@ -1,21 +1,21 @@
-+pcre_byte_order.obj &
-+pcre_chartables.obj &
-+pcre_compile.obj &
-+pcre_config.obj &
-+pcre_dfa_exec.obj &
-+pcre_exec.obj &
-+pcre_fullinfo.obj &
-+pcre_get.obj &
-+pcre_globals.obj &
-+pcre_jit_compile.obj &
-+pcre_maketables.obj &
-+pcre_newline.obj &
-+pcre_ord2utf8.obj &
-+pcre_refcount.obj &
-+pcre_string_utils.obj &
-+pcre_study.obj &
-+pcre_tables.obj &
-+pcre_ucd.obj &
-+pcre_valid_utf8.obj &
-+pcre_version.obj &
-+pcre_xclass.obj
++pcre_byte_order.obj &
++pcre_chartables.obj &
++pcre_compile.obj &
++pcre_config.obj &
++pcre_dfa_exec.obj &
++pcre_exec.obj &
++pcre_fullinfo.obj &
++pcre_get.obj &
++pcre_globals.obj &
++pcre_jit_compile.obj &
++pcre_maketables.obj &
++pcre_newline.obj &
++pcre_ord2utf8.obj &
++pcre_refcount.obj &
++pcre_string_utils.obj &
++pcre_study.obj &
++pcre_tables.obj &
++pcre_ucd.obj &
++pcre_valid_utf8.obj &
++pcre_version.obj &
++pcre_xclass.obj
diff --git a/dist/missing b/dist/missing
index db98974..f62bbae 100755
--- a/dist/missing
+++ b/dist/missing
@@ -3,7 +3,7 @@
scriptversion=2013-10-28.13; # UTC
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
diff --git a/dist/pcre.h.generic b/dist/pcre.h.generic
index 9216d55..58ed46a 100644
--- a/dist/pcre.h.generic
+++ b/dist/pcre.h.generic
@@ -42,9 +42,9 @@
/* The current PCRE version information. */
#define PCRE_MAJOR 8
-#define PCRE_MINOR 36
+#define PCRE_MINOR 37
#define PCRE_PRERELEASE
-#define PCRE_DATE 2014-09-26
+#define PCRE_DATE 2015-04-28
/* When an application links to a PCRE DLL in Windows, the symbols that are
imported have to be identified as such. When building PCRE, the appropriate
diff --git a/dist/pcre_compile.c b/dist/pcre_compile.c
index efc0b21..0efad26 100644
--- a/dist/pcre_compile.c
+++ b/dist/pcre_compile.c
@@ -1704,6 +1704,7 @@
utf TRUE in UTF-8 / UTF-16 / UTF-32 mode
atend TRUE if called when the pattern is complete
cd the "compile data" structure
+ recurses chain of recurse_check to catch mutual recursion
Returns: the fixed length,
or -1 if there is no fixed length,
@@ -1713,10 +1714,11 @@
*/
static int
-find_fixedlength(pcre_uchar *code, BOOL utf, BOOL atend, compile_data *cd)
+find_fixedlength(pcre_uchar *code, BOOL utf, BOOL atend, compile_data *cd,
+ recurse_check *recurses)
{
int length = -1;
-
+recurse_check this_recurse;
register int branchlength = 0;
register pcre_uchar *cc = code + 1 + LINK_SIZE;
@@ -1741,7 +1743,8 @@
case OP_ONCE:
case OP_ONCE_NC:
case OP_COND:
- d = find_fixedlength(cc + ((op == OP_CBRA)? IMM2_SIZE : 0), utf, atend, cd);
+ d = find_fixedlength(cc + ((op == OP_CBRA)? IMM2_SIZE : 0), utf, atend, cd,
+ recurses);
if (d < 0) return d;
branchlength += d;
do cc += GET(cc, 1); while (*cc == OP_ALT);
@@ -1775,7 +1778,15 @@
cs = ce = (pcre_uchar *)cd->start_code + GET(cc, 1); /* Start subpattern */
do ce += GET(ce, 1); while (*ce == OP_ALT); /* End subpattern */
if (cc > cs && cc < ce) return -1; /* Recursion */
- d = find_fixedlength(cs + IMM2_SIZE, utf, atend, cd);
+ else /* Check for mutual recursion */
+ {
+ recurse_check *r = recurses;
+ for (r = recurses; r != NULL; r = r->prev) if (r->group == cs) break;
+ if (r != NULL) return -1; /* Mutual recursion */
+ }
+ this_recurse.prev = recurses;
+ this_recurse.group = cs;
+ d = find_fixedlength(cs + IMM2_SIZE, utf, atend, cd, &this_recurse);
if (d < 0) return d;
branchlength += d;
cc += 1 + LINK_SIZE;
@@ -2129,32 +2140,60 @@
{
case OP_CHAR:
case OP_CHARI:
+ case OP_NOT:
+ case OP_NOTI:
case OP_EXACT:
case OP_EXACTI:
+ case OP_NOTEXACT:
+ case OP_NOTEXACTI:
case OP_UPTO:
case OP_UPTOI:
+ case OP_NOTUPTO:
+ case OP_NOTUPTOI:
case OP_MINUPTO:
case OP_MINUPTOI:
+ case OP_NOTMINUPTO:
+ case OP_NOTMINUPTOI:
case OP_POSUPTO:
case OP_POSUPTOI:
+ case OP_NOTPOSUPTO:
+ case OP_NOTPOSUPTOI:
case OP_STAR:
case OP_STARI:
+ case OP_NOTSTAR:
+ case OP_NOTSTARI:
case OP_MINSTAR:
case OP_MINSTARI:
+ case OP_NOTMINSTAR:
+ case OP_NOTMINSTARI:
case OP_POSSTAR:
case OP_POSSTARI:
+ case OP_NOTPOSSTAR:
+ case OP_NOTPOSSTARI:
case OP_PLUS:
case OP_PLUSI:
+ case OP_NOTPLUS:
+ case OP_NOTPLUSI:
case OP_MINPLUS:
case OP_MINPLUSI:
+ case OP_NOTMINPLUS:
+ case OP_NOTMINPLUSI:
case OP_POSPLUS:
case OP_POSPLUSI:
+ case OP_NOTPOSPLUS:
+ case OP_NOTPOSPLUSI:
case OP_QUERY:
case OP_QUERYI:
+ case OP_NOTQUERY:
+ case OP_NOTQUERYI:
case OP_MINQUERY:
case OP_MINQUERYI:
+ case OP_NOTMINQUERY:
+ case OP_NOTMINQUERYI:
case OP_POSQUERY:
case OP_POSQUERYI:
+ case OP_NOTPOSQUERY:
+ case OP_NOTPOSQUERYI:
if (HAS_EXTRALEN(code[-1])) code += GET_EXTRALEN(code[-1]);
break;
}
@@ -2334,11 +2373,6 @@
Returns: TRUE if what is matched could be empty
*/
-typedef struct recurse_check {
- struct recurse_check *prev;
- const pcre_uchar *group;
-} recurse_check;
-
static BOOL
could_be_empty_branch(const pcre_uchar *code, const pcre_uchar *endcode,
BOOL utf, compile_data *cd, recurse_check *recurses)
@@ -2469,8 +2503,8 @@
empty_branch = FALSE;
do
{
- if (!empty_branch && could_be_empty_branch(code, endcode, utf, cd, NULL))
- empty_branch = TRUE;
+ if (!empty_branch && could_be_empty_branch(code, endcode, utf, cd,
+ recurses)) empty_branch = TRUE;
code += GET(code, 1);
}
while (*code == OP_ALT);
@@ -3065,7 +3099,7 @@
static BOOL
compare_opcodes(const pcre_uchar *code, BOOL utf, const compile_data *cd,
- const pcre_uint32 *base_list, const pcre_uchar *base_end)
+ const pcre_uint32 *base_list, const pcre_uchar *base_end, int *rec_limit)
{
pcre_uchar c;
pcre_uint32 list[8];
@@ -3082,6 +3116,9 @@
BOOL accepted, invert_bits;
BOOL entered_a_group = FALSE;
+if (*rec_limit == 0) return FALSE;
+--(*rec_limit);
+
/* Note: the base_list[1] contains whether the current opcode has greedy
(represented by a non-zero value) quantifier. This is a different from
other character type lists, which stores here that the character iterator
@@ -3152,7 +3189,8 @@
while (*next_code == OP_ALT)
{
- if (!compare_opcodes(code, utf, cd, base_list, base_end)) return FALSE;
+ if (!compare_opcodes(code, utf, cd, base_list, base_end, rec_limit))
+ return FALSE;
code = next_code + 1 + LINK_SIZE;
next_code += GET(next_code, 1);
}
@@ -3172,7 +3210,7 @@
/* The bracket content will be checked by the
OP_BRA/OP_CBRA case above. */
next_code += 1 + LINK_SIZE;
- if (!compare_opcodes(next_code, utf, cd, base_list, base_end))
+ if (!compare_opcodes(next_code, utf, cd, base_list, base_end, rec_limit))
return FALSE;
code += PRIV(OP_lengths)[c];
@@ -3605,11 +3643,20 @@
const pcre_uchar *end;
pcre_uchar *repeat_opcode;
pcre_uint32 list[8];
+int rec_limit;
for (;;)
{
c = *code;
+ /* When a pattern with bad UTF-8 encoding is compiled with NO_UTF_CHECK,
+ it may compile without complaining, but may get into a loop here if the code
+ pointer points to a bad value. This is, of course a documentated possibility,
+ when NO_UTF_CHECK is set, so it isn't a bug, but we can detect this case and
+ just give up on this optimization. */
+
+ if (c >= OP_TABLE_LENGTH) return;
+
if (c >= OP_STAR && c <= OP_TYPEPOSUPTO)
{
c -= get_repeat_base(c) - OP_STAR;
@@ -3617,7 +3664,8 @@
get_chr_property_list(code, utf, cd->fcc, list) : NULL;
list[1] = c == OP_STAR || c == OP_PLUS || c == OP_QUERY || c == OP_UPTO;
- if (end != NULL && compare_opcodes(end, utf, cd, list, end))
+ rec_limit = 1000;
+ if (end != NULL && compare_opcodes(end, utf, cd, list, end, &rec_limit))
{
switch(c)
{
@@ -3673,7 +3721,8 @@
list[1] = (c & 1) == 0;
- if (compare_opcodes(end, utf, cd, list, end))
+ rec_limit = 1000;
+ if (compare_opcodes(end, utf, cd, list, end, &rec_limit))
{
switch (c)
{
@@ -3947,14 +3996,14 @@
adjust the amount by which the group is to be moved
utf TRUE in UTF-8 / UTF-16 / UTF-32 mode
cd contains pointers to tables etc.
- save_hwm the hwm forward reference pointer at the start of the group
+ save_hwm_offset the hwm forward reference offset at the start of the group
Returns: nothing
*/
static void
adjust_recurse(pcre_uchar *group, int adjust, BOOL utf, compile_data *cd,
- pcre_uchar *save_hwm)
+ size_t save_hwm_offset)
{
pcre_uchar *ptr = group;
@@ -3966,7 +4015,8 @@
/* See if this recursion is on the forward reference list. If so, adjust the
reference. */
- for (hc = save_hwm; hc < cd->hwm; hc += LINK_SIZE)
+ for (hc = (pcre_uchar *)cd->start_workspace + save_hwm_offset; hc < cd->hwm;
+ hc += LINK_SIZE)
{
offset = (int)GET(hc, 0);
if (cd->start_code + offset == ptr + 1)
@@ -4171,7 +4221,11 @@
range. Otherwise, use a recursive call to add the additional range. */
else if (oc < start && od >= start - 1) start = oc; /* Extend downwards */
- else if (od > end && oc <= end + 1) end = od; /* Extend upwards */
+ else if (od > end && oc <= end + 1)
+ {
+ end = od; /* Extend upwards */
+ if (end > classbits_end) classbits_end = (end <= 0xff ? end : 0xff);
+ }
else n8 += add_to_class(classbits, uchardptr, options, cd, oc, od);
}
}
@@ -4411,7 +4465,7 @@
const pcre_uchar *nestptr = NULL;
pcre_uchar *previous = NULL;
pcre_uchar *previous_callout = NULL;
-pcre_uchar *save_hwm = NULL;
+size_t save_hwm_offset = 0;
pcre_uint8 classbits[32];
/* We can fish out the UTF-8 setting once and for all into a BOOL, but we
@@ -5470,6 +5524,12 @@
PUT(previous, 1, (int)(code - previous));
break; /* End of class handling */
}
+
+ /* Even though any XCLASS list is now discarded, we must allow for
+ its memory. */
+
+ if (lengthptr != NULL)
+ *lengthptr += (int)(class_uchardata - class_uchardata_base);
#endif
/* If there are no characters > 255, or they are all to be included or
@@ -5870,6 +5930,7 @@
{
register int i;
int len = (int)(code - previous);
+ size_t base_hwm_offset = save_hwm_offset;
pcre_uchar *bralink = NULL;
pcre_uchar *brazeroptr = NULL;
@@ -5924,7 +5985,7 @@
if (repeat_max <= 1) /* Covers 0, 1, and unlimited */
{
*code = OP_END;
- adjust_recurse(previous, 1, utf, cd, save_hwm);
+ adjust_recurse(previous, 1, utf, cd, save_hwm_offset);
memmove(previous + 1, previous, IN_UCHARS(len));
code++;
if (repeat_max == 0)
@@ -5948,7 +6009,7 @@
{
int offset;
*code = OP_END;
- adjust_recurse(previous, 2 + LINK_SIZE, utf, cd, save_hwm);
+ adjust_recurse(previous, 2 + LINK_SIZE, utf, cd, save_hwm_offset);
memmove(previous + 2 + LINK_SIZE, previous, IN_UCHARS(len));
code += 2 + LINK_SIZE;
*previous++ = OP_BRAZERO + repeat_type;
@@ -6011,26 +6072,25 @@
for (i = 1; i < repeat_min; i++)
{
pcre_uchar *hc;
- pcre_uchar *this_hwm = cd->hwm;
+ size_t this_hwm_offset = cd->hwm - cd->start_workspace;
memcpy(code, previous, IN_UCHARS(len));
while (cd->hwm > cd->start_workspace + cd->workspace_size -
- WORK_SIZE_SAFETY_MARGIN - (this_hwm - save_hwm))
+ WORK_SIZE_SAFETY_MARGIN -
+ (this_hwm_offset - base_hwm_offset))
{
- size_t save_offset = save_hwm - cd->start_workspace;
- size_t this_offset = this_hwm - cd->start_workspace;
*errorcodeptr = expand_workspace(cd);
if (*errorcodeptr != 0) goto FAILED;
- save_hwm = (pcre_uchar *)cd->start_workspace + save_offset;
- this_hwm = (pcre_uchar *)cd->start_workspace + this_offset;
}
- for (hc = save_hwm; hc < this_hwm; hc += LINK_SIZE)
+ for (hc = (pcre_uchar *)cd->start_workspace + base_hwm_offset;
+ hc < (pcre_uchar *)cd->start_workspace + this_hwm_offset;
+ hc += LINK_SIZE)
{
PUT(cd->hwm, 0, GET(hc, 0) + len);
cd->hwm += LINK_SIZE;
}
- save_hwm = this_hwm;
+ base_hwm_offset = this_hwm_offset;
code += len;
}
}
@@ -6075,7 +6135,7 @@
else for (i = repeat_max - 1; i >= 0; i--)
{
pcre_uchar *hc;
- pcre_uchar *this_hwm = cd->hwm;
+ size_t this_hwm_offset = cd->hwm - cd->start_workspace;
*code++ = OP_BRAZERO + repeat_type;
@@ -6097,22 +6157,21 @@
copying them. */
while (cd->hwm > cd->start_workspace + cd->workspace_size -
- WORK_SIZE_SAFETY_MARGIN - (this_hwm - save_hwm))
+ WORK_SIZE_SAFETY_MARGIN -
+ (this_hwm_offset - base_hwm_offset))
{
- size_t save_offset = save_hwm - cd->start_workspace;
- size_t this_offset = this_hwm - cd->start_workspace;
*errorcodeptr = expand_workspace(cd);
if (*errorcodeptr != 0) goto FAILED;
- save_hwm = (pcre_uchar *)cd->start_workspace + save_offset;
- this_hwm = (pcre_uchar *)cd->start_workspace + this_offset;
}
- for (hc = save_hwm; hc < this_hwm; hc += LINK_SIZE)
+ for (hc = (pcre_uchar *)cd->start_workspace + base_hwm_offset;
+ hc < (pcre_uchar *)cd->start_workspace + this_hwm_offset;
+ hc += LINK_SIZE)
{
PUT(cd->hwm, 0, GET(hc, 0) + len + ((i != 0)? 2+LINK_SIZE : 1));
cd->hwm += LINK_SIZE;
}
- save_hwm = this_hwm;
+ base_hwm_offset = this_hwm_offset;
code += len;
}
@@ -6208,7 +6267,7 @@
{
int nlen = (int)(code - bracode);
*code = OP_END;
- adjust_recurse(bracode, 1 + LINK_SIZE, utf, cd, save_hwm);
+ adjust_recurse(bracode, 1 + LINK_SIZE, utf, cd, save_hwm_offset);
memmove(bracode + 1 + LINK_SIZE, bracode, IN_UCHARS(nlen));
code += 1 + LINK_SIZE;
nlen += 1 + LINK_SIZE;
@@ -6342,7 +6401,7 @@
else
{
*code = OP_END;
- adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cd, save_hwm);
+ adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cd, save_hwm_offset);
memmove(tempcode + 1 + LINK_SIZE, tempcode, IN_UCHARS(len));
code += 1 + LINK_SIZE;
len += 1 + LINK_SIZE;
@@ -6391,7 +6450,7 @@
default:
*code = OP_END;
- adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cd, save_hwm);
+ adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cd, save_hwm_offset);
memmove(tempcode + 1 + LINK_SIZE, tempcode, IN_UCHARS(len));
code += 1 + LINK_SIZE;
len += 1 + LINK_SIZE;
@@ -6420,15 +6479,25 @@
parenthesis forms. */
case CHAR_LEFT_PARENTHESIS:
- newoptions = options;
- skipbytes = 0;
- bravalue = OP_CBRA;
- save_hwm = cd->hwm;
- reset_bracount = FALSE;
-
- /* First deal with various "verbs" that can be introduced by '*'. */
-
ptr++;
+
+ /* First deal with comments. Putting this code right at the start ensures
+ that comments have no bad side effects. */
+
+ if (ptr[0] == CHAR_QUESTION_MARK && ptr[1] == CHAR_NUMBER_SIGN)
+ {
+ ptr += 2;
+ while (*ptr != CHAR_NULL && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;
+ if (*ptr == CHAR_NULL)
+ {
+ *errorcodeptr = ERR18;
+ goto FAILED;
+ }
+ continue;
+ }
+
+ /* Now deal with various "verbs" that can be introduced by '*'. */
+
if (ptr[0] == CHAR_ASTERISK && (ptr[1] == ':'
|| (MAX_255(ptr[1]) && ((cd->ctypes[ptr[1]] & ctype_letter) != 0))))
{
@@ -6549,10 +6618,18 @@
goto FAILED;
}
+ /* Initialize for "real" parentheses */
+
+ newoptions = options;
+ skipbytes = 0;
+ bravalue = OP_CBRA;
+ save_hwm_offset = cd->hwm - cd->start_workspace;
+ reset_bracount = FALSE;
+
/* Deal with the extended parentheses; all are introduced by '?', and the
appearance of any of them means that this is not a capturing group. */
- else if (*ptr == CHAR_QUESTION_MARK)
+ if (*ptr == CHAR_QUESTION_MARK)
{
int i, set, unset, namelen;
int *optset;
@@ -6561,17 +6638,6 @@
switch (*(++ptr))
{
- case CHAR_NUMBER_SIGN: /* Comment; skip to ket */
- ptr++;
- while (*ptr != CHAR_NULL && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;
- if (*ptr == CHAR_NULL)
- {
- *errorcodeptr = ERR18;
- goto FAILED;
- }
- continue;
-
-
/* ------------------------------------------------------------ */
case CHAR_VERTICAL_LINE: /* Reset capture count for each branch */
reset_bracount = TRUE;
@@ -6620,8 +6686,13 @@
if (tempptr[1] == CHAR_QUESTION_MARK &&
(tempptr[2] == CHAR_EQUALS_SIGN ||
tempptr[2] == CHAR_EXCLAMATION_MARK ||
- tempptr[2] == CHAR_LESS_THAN_SIGN))
+ (tempptr[2] == CHAR_LESS_THAN_SIGN &&
+ (tempptr[3] == CHAR_EQUALS_SIGN ||
+ tempptr[3] == CHAR_EXCLAMATION_MARK))))
+ {
+ cd->iscondassert = TRUE;
break;
+ }
/* Other conditions use OP_CREF/OP_DNCREF/OP_RREF/OP_DNRREF, and all
need to skip at least 1+IMM2_SIZE bytes at the start of the group. */
@@ -6698,8 +6769,7 @@
ptr++;
}
namelen = (int)(ptr - name);
- if (lengthptr != NULL && (options & PCRE_DUPNAMES) != 0)
- *lengthptr += IMM2_SIZE;
+ if (lengthptr != NULL) *lengthptr += IMM2_SIZE;
}
/* Check the terminator */
@@ -6735,6 +6805,7 @@
goto FAILED;
}
PUT2(code, 2+LINK_SIZE, recno);
+ if (recno > cd->top_backref) cd->top_backref = recno;
break;
}
@@ -6757,6 +6828,7 @@
int offset = i++;
int count = 1;
recno = GET2(slot, 0); /* Number from first found */
+ if (recno > cd->top_backref) cd->top_backref = recno;
for (; i < cd->names_found; i++)
{
slot += cd->name_entry_size;
@@ -7114,11 +7186,11 @@
if (!is_recurse) cd->namedrefcount++;
- /* If duplicate names are permitted, we have to allow for a named
- reference to a duplicated name (this cannot be determined until the
- second pass). This needs an extra 16-bit data item. */
+ /* We have to allow for a named reference to a duplicated name (this
+ cannot be determined until the second pass). This needs an extra
+ 16-bit data item. */
- if ((options & PCRE_DUPNAMES) != 0) *lengthptr += IMM2_SIZE;
+ *lengthptr += IMM2_SIZE;
}
/* In the real compile, search the name table. We check the name
@@ -7475,12 +7547,22 @@
goto FAILED;
}
- /* Assertions used not to be repeatable, but this was changed for Perl
- compatibility, so all kinds can now be repeated. We copy code into a
+ /* All assertions used not to be repeatable, but this was changed for Perl
+ compatibility. All kinds can now be repeated except for assertions that are
+ conditions (Perl also forbids these to be repeated). We copy code into a
non-register variable (tempcode) in order to be able to pass its address
- because some compilers complain otherwise. */
+ because some compilers complain otherwise. At the start of a conditional
+ group whose condition is an assertion, cd->iscondassert is set. We unset it
+ here so as to allow assertions later in the group to be quantified. */
- previous = code; /* For handling repetition */
+ if (bravalue >= OP_ASSERT && bravalue <= OP_ASSERTBACK_NOT &&
+ cd->iscondassert)
+ {
+ previous = NULL;
+ cd->iscondassert = FALSE;
+ }
+ else previous = code;
+
*code = bravalue;
tempcode = code;
tempreqvary = cd->req_varyopt; /* Save value before bracket */
@@ -7727,7 +7809,7 @@
const pcre_uchar *p;
pcre_uint32 cf;
- save_hwm = cd->hwm; /* Normally this is set when '(' is read */
+ save_hwm_offset = cd->hwm - cd->start_workspace; /* Normally this is set when '(' is read */
terminator = (*(++ptr) == CHAR_LESS_THAN_SIGN)?
CHAR_GREATER_THAN_SIGN : CHAR_APOSTROPHE;
@@ -8054,6 +8136,7 @@
unsigned int orig_bracount;
unsigned int max_bracount;
branch_chain bc;
+size_t save_hwm_offset;
/* If set, call the external function that checks for stack availability. */
@@ -8071,6 +8154,8 @@
firstchar = reqchar = 0;
firstcharflags = reqcharflags = REQ_UNSET;
+save_hwm_offset = cd->hwm - cd->start_workspace;
+
/* Accumulate the length for use in the pre-compile phase. Start with the
length of the BRA and KET and any extra bytes that are required at the
beginning. We accumulate in a local variable to save frequent testing of
@@ -8212,7 +8297,7 @@
int fixed_length;
*code = OP_END;
fixed_length = find_fixedlength(last_branch, (options & PCRE_UTF8) != 0,
- FALSE, cd);
+ FALSE, cd, NULL);
DPRINTF(("fixed length = %d\n", fixed_length));
if (fixed_length == -3)
{
@@ -8273,7 +8358,7 @@
{
*code = OP_END;
adjust_recurse(start_bracket, 1 + LINK_SIZE,
- (options & PCRE_UTF8) != 0, cd, cd->hwm);
+ (options & PCRE_UTF8) != 0, cd, save_hwm_offset);
memmove(start_bracket + 1 + LINK_SIZE, start_bracket,
IN_UCHARS(code - start_bracket));
*start_bracket = OP_ONCE;
@@ -8497,6 +8582,7 @@
case OP_RREF:
case OP_DNRREF:
case OP_DEF:
+ case OP_FAIL:
return FALSE;
default: /* Assertion */
@@ -9081,6 +9167,7 @@
cd->namedrefcount = 0;
cd->start_code = cworkspace;
cd->hwm = cworkspace;
+cd->iscondassert = FALSE;
cd->start_workspace = cworkspace;
cd->workspace_size = COMPILE_WORK_SIZE;
cd->named_groups = named_groups;
@@ -9118,13 +9205,6 @@
goto PCRE_EARLY_ERROR_RETURN;
}
-/* If there are groups with duplicate names and there are also references by
-name, we must allow for the possibility of named references to duplicated
-groups. These require an extra data item each. */
-
-if (cd->dupnames && cd->namedrefcount > 0)
- length += cd->namedrefcount * IMM2_SIZE * sizeof(pcre_uchar);
-
/* Compute the size of the data block for storing the compiled pattern. Integer
overflow should no longer be possible because nowadays we limit the maximum
value of cd->names_found and cd->name_entry_size. */
@@ -9183,6 +9263,7 @@
codestart = cd->name_table + re->name_entry_size * re->name_count;
cd->start_code = codestart;
cd->hwm = (pcre_uchar *)(cd->start_workspace);
+cd->iscondassert = FALSE;
cd->req_varyopt = 0;
cd->had_accept = FALSE;
cd->had_pruneorskip = FALSE;
@@ -9319,7 +9400,7 @@
int end_op = *be;
*be = OP_END;
fixed_length = find_fixedlength(cc, (re->options & PCRE_UTF8) != 0, TRUE,
- cd);
+ cd, NULL);
*be = end_op;
DPRINTF(("fixed length = %d\n", fixed_length));
if (fixed_length < 0)
diff --git a/dist/pcre_dfa_exec.c b/dist/pcre_dfa_exec.c
index 87f4aef..170ce6a 100644
--- a/dist/pcre_dfa_exec.c
+++ b/dist/pcre_dfa_exec.c
@@ -2736,9 +2736,10 @@
condcode == OP_DNRREF)
return PCRE_ERROR_DFA_UCOND;
- /* The DEFINE condition is always false */
+ /* The DEFINE condition is always false, and the assertion (?!) is
+ converted to OP_FAIL. */
- if (condcode == OP_DEF)
+ if (condcode == OP_DEF || condcode == OP_FAIL)
{ ADD_ACTIVE(state_offset + codelink + LINK_SIZE + 1, 0); }
/* The only supported version of OP_RREF is for the value RREF_ANY,
diff --git a/dist/pcre_exec.c b/dist/pcre_exec.c
index 654eb9e..c021fe1 100644
--- a/dist/pcre_exec.c
+++ b/dist/pcre_exec.c
@@ -1136,93 +1136,81 @@
printf("\n");
#endif
- if (offset < md->offset_max)
+ if (offset >= md->offset_max) goto POSSESSIVE_NON_CAPTURE;
+
+ matched_once = FALSE;
+ code_offset = (int)(ecode - md->start_code);
+
+ save_offset1 = md->offset_vector[offset];
+ save_offset2 = md->offset_vector[offset+1];
+ save_offset3 = md->offset_vector[md->offset_end - number];
+ save_capture_last = md->capture_last;
+
+ DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3));
+
+ /* Each time round the loop, save the current subject position for use
+ when the group matches. For MATCH_MATCH, the group has matched, so we
+ restart it with a new subject starting position, remembering that we had
+ at least one match. For MATCH_NOMATCH, carry on with the alternatives, as
+ usual. If we haven't matched any alternatives in any iteration, check to
+ see if a previous iteration matched. If so, the group has matched;
+ continue from afterwards. Otherwise it has failed; restore the previous
+ capture values before returning NOMATCH. */
+
+ for (;;)
{
- matched_once = FALSE;
- code_offset = (int)(ecode - md->start_code);
-
- save_offset1 = md->offset_vector[offset];
- save_offset2 = md->offset_vector[offset+1];
- save_offset3 = md->offset_vector[md->offset_end - number];
- save_capture_last = md->capture_last;
-
- DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3));
-
- /* Each time round the loop, save the current subject position for use
- when the group matches. For MATCH_MATCH, the group has matched, so we
- restart it with a new subject starting position, remembering that we had
- at least one match. For MATCH_NOMATCH, carry on with the alternatives, as
- usual. If we haven't matched any alternatives in any iteration, check to
- see if a previous iteration matched. If so, the group has matched;
- continue from afterwards. Otherwise it has failed; restore the previous
- capture values before returning NOMATCH. */
-
- for (;;)
+ md->offset_vector[md->offset_end - number] =
+ (int)(eptr - md->start_subject);
+ if (op >= OP_SBRA) md->match_function_type = MATCH_CBEGROUP;
+ RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode], offset_top, md,
+ eptrb, RM63);
+ if (rrc == MATCH_KETRPOS)
{
- md->offset_vector[md->offset_end - number] =
- (int)(eptr - md->start_subject);
- if (op >= OP_SBRA) md->match_function_type = MATCH_CBEGROUP;
- RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode], offset_top, md,
- eptrb, RM63);
- if (rrc == MATCH_KETRPOS)
+ offset_top = md->end_offset_top;
+ ecode = md->start_code + code_offset;
+ save_capture_last = md->capture_last;
+ matched_once = TRUE;
+ mstart = md->start_match_ptr; /* In case \K changed it */
+ if (eptr == md->end_match_ptr) /* Matched an empty string */
{
- offset_top = md->end_offset_top;
- ecode = md->start_code + code_offset;
- save_capture_last = md->capture_last;
- matched_once = TRUE;
- mstart = md->start_match_ptr; /* In case \K changed it */
- if (eptr == md->end_match_ptr) /* Matched an empty string */
- {
- do ecode += GET(ecode, 1); while (*ecode == OP_ALT);
- break;
- }
- eptr = md->end_match_ptr;
- continue;
+ do ecode += GET(ecode, 1); while (*ecode == OP_ALT);
+ break;
}
-
- /* See comment in the code for capturing groups above about handling
- THEN. */
-
- if (rrc == MATCH_THEN)
- {
- next = ecode + GET(ecode,1);
- if (md->start_match_ptr < next &&
- (*ecode == OP_ALT || *next == OP_ALT))
- rrc = MATCH_NOMATCH;
- }
-
- if (rrc != MATCH_NOMATCH) RRETURN(rrc);
- md->capture_last = save_capture_last;
- ecode += GET(ecode, 1);
- if (*ecode != OP_ALT) break;
+ eptr = md->end_match_ptr;
+ continue;
}
- if (!matched_once)
+ /* See comment in the code for capturing groups above about handling
+ THEN. */
+
+ if (rrc == MATCH_THEN)
{
- md->offset_vector[offset] = save_offset1;
- md->offset_vector[offset+1] = save_offset2;
- md->offset_vector[md->offset_end - number] = save_offset3;
+ next = ecode + GET(ecode,1);
+ if (md->start_match_ptr < next &&
+ (*ecode == OP_ALT || *next == OP_ALT))
+ rrc = MATCH_NOMATCH;
}
- if (allow_zero || matched_once)
- {
- ecode += 1 + LINK_SIZE;
- break;
- }
-
- RRETURN(MATCH_NOMATCH);
+ if (rrc != MATCH_NOMATCH) RRETURN(rrc);
+ md->capture_last = save_capture_last;
+ ecode += GET(ecode, 1);
+ if (*ecode != OP_ALT) break;
}
- /* FALL THROUGH ... Insufficient room for saving captured contents. Treat
- as a non-capturing bracket. */
+ if (!matched_once)
+ {
+ md->offset_vector[offset] = save_offset1;
+ md->offset_vector[offset+1] = save_offset2;
+ md->offset_vector[md->offset_end - number] = save_offset3;
+ }
- /* VVVVVVVVVVVVVVVVVVVVVVVVV */
- /* VVVVVVVVVVVVVVVVVVVVVVVVV */
+ if (allow_zero || matched_once)
+ {
+ ecode += 1 + LINK_SIZE;
+ break;
+ }
- DPRINTF(("insufficient capture room: treat as non-capturing\n"));
-
- /* VVVVVVVVVVVVVVVVVVVVVVVVV */
- /* VVVVVVVVVVVVVVVVVVVVVVVVV */
+ RRETURN(MATCH_NOMATCH);
/* Non-capturing possessive bracket with unlimited repeat. We come here
from BRAZERO with allow_zero = TRUE. The code is similar to the above,
@@ -1388,6 +1376,7 @@
break;
case OP_DEF: /* DEFINE - always false */
+ case OP_FAIL: /* From optimized (?!) condition */
break;
/* The condition is an assertion. Call match() to evaluate it - setting
@@ -1404,8 +1393,11 @@
condition = TRUE;
/* Advance ecode past the assertion to the start of the first branch,
- but adjust it so that the general choosing code below works. */
+ but adjust it so that the general choosing code below works. If the
+ assertion has a quantifier that allows zero repeats we must skip over
+ the BRAZERO. This is a lunatic thing to do, but somebody did! */
+ if (*ecode == OP_BRAZERO) ecode++;
ecode += GET(ecode, 1);
while (*ecode == OP_ALT) ecode += GET(ecode, 1);
ecode += 1 + LINK_SIZE - PRIV(OP_lengths)[condcode];
@@ -1474,7 +1466,18 @@
md->offset_vector[offset] =
md->offset_vector[md->offset_end - number];
md->offset_vector[offset+1] = (int)(eptr - md->start_subject);
- if (offset_top <= offset) offset_top = offset + 2;
+
+ /* If this group is at or above the current highwater mark, ensure that
+ any groups between the current high water mark and this group are marked
+ unset and then update the high water mark. */
+
+ if (offset >= offset_top)
+ {
+ register int *iptr = md->offset_vector + offset_top;
+ register int *iend = md->offset_vector + offset;
+ while (iptr < iend) *iptr++ = -1;
+ offset_top = offset + 2;
+ }
}
ecode += 1 + IMM2_SIZE;
break;
@@ -1826,7 +1829,11 @@
are defined in a range that can be tested for. */
if (rrc >= MATCH_BACKTRACK_MIN && rrc <= MATCH_BACKTRACK_MAX)
+ {
+ if (new_recursive.offset_save != stacksave)
+ (PUBL(free))(new_recursive.offset_save);
RRETURN(MATCH_NOMATCH);
+ }
/* Any return code other than NOMATCH is an error. */
@@ -3476,7 +3483,7 @@
if (possessive) continue; /* No backtracking */
for(;;)
{
- if (eptr == pp) goto TAIL_RECURSE;
+ if (eptr <= pp) goto TAIL_RECURSE;
RMATCH(eptr, ecode, offset_top, md, eptrb, RM23);
if (rrc != MATCH_NOMATCH) RRETURN(rrc);
#ifdef SUPPORT_UCP
@@ -3897,7 +3904,7 @@
if (possessive) continue; /* No backtracking */
for(;;)
{
- if (eptr == pp) goto TAIL_RECURSE;
+ if (eptr <= pp) goto TAIL_RECURSE;
RMATCH(eptr, ecode, offset_top, md, eptrb, RM30);
if (rrc != MATCH_NOMATCH) RRETURN(rrc);
eptr--;
@@ -4032,7 +4039,7 @@
if (possessive) continue; /* No backtracking */
for(;;)
{
- if (eptr == pp) goto TAIL_RECURSE;
+ if (eptr <= pp) goto TAIL_RECURSE;
RMATCH(eptr, ecode, offset_top, md, eptrb, RM34);
if (rrc != MATCH_NOMATCH) RRETURN(rrc);
eptr--;
@@ -5603,7 +5610,7 @@
if (possessive) continue; /* No backtracking */
for(;;)
{
- if (eptr == pp) goto TAIL_RECURSE;
+ if (eptr <= pp) goto TAIL_RECURSE;
RMATCH(eptr, ecode, offset_top, md, eptrb, RM44);
if (rrc != MATCH_NOMATCH) RRETURN(rrc);
eptr--;
@@ -5645,12 +5652,17 @@
if (possessive) continue; /* No backtracking */
+ /* We use <= pp rather than == pp to detect the start of the run while
+ backtracking because the use of \C in UTF mode can cause BACKCHAR to
+ move back past pp. This is just palliative; the use of \C in UTF mode
+ is fraught with danger. */
+
for(;;)
{
int lgb, rgb;
PCRE_PUCHAR fptr;
- if (eptr == pp) goto TAIL_RECURSE; /* At start of char run */
+ if (eptr <= pp) goto TAIL_RECURSE; /* At start of char run */
RMATCH(eptr, ecode, offset_top, md, eptrb, RM45);
if (rrc != MATCH_NOMATCH) RRETURN(rrc);
@@ -5668,7 +5680,7 @@
for (;;)
{
- if (eptr == pp) goto TAIL_RECURSE; /* At start of char run */
+ if (eptr <= pp) goto TAIL_RECURSE; /* At start of char run */
fptr = eptr - 1;
if (!utf) c = *fptr; else
{
@@ -5918,7 +5930,7 @@
if (possessive) continue; /* No backtracking */
for(;;)
{
- if (eptr == pp) goto TAIL_RECURSE;
+ if (eptr <= pp) goto TAIL_RECURSE;
RMATCH(eptr, ecode, offset_top, md, eptrb, RM46);
if (rrc != MATCH_NOMATCH) RRETURN(rrc);
eptr--;
diff --git a/dist/pcre_internal.h b/dist/pcre_internal.h
index 02d3ab1..dd0ac7f 100644
--- a/dist/pcre_internal.h
+++ b/dist/pcre_internal.h
@@ -2446,6 +2446,7 @@
BOOL had_pruneorskip; /* (*PRUNE) or (*SKIP) encountered */
BOOL check_lookbehind; /* Lookbehinds need later checking */
BOOL dupnames; /* Duplicate names exist */
+ BOOL iscondassert; /* Next assert is a condition */
int nltype; /* Newline type */
int nllen; /* Newline string length */
pcre_uchar nl[4]; /* Newline string when fixed length */
@@ -2459,6 +2460,13 @@
pcre_uchar *current_branch;
} branch_chain;
+/* Structure for mutual recursion detection. */
+
+typedef struct recurse_check {
+ struct recurse_check *prev;
+ const pcre_uchar *group;
+} recurse_check;
+
/* Structure for items in a linked list that represents an explicit recursive
call within the pattern; used by pcre_exec(). */
diff --git a/dist/pcre_jit_compile.c b/dist/pcre_jit_compile.c
index 256e3a4..debdf6e 100644
--- a/dist/pcre_jit_compile.c
+++ b/dist/pcre_jit_compile.c
@@ -52,8 +52,8 @@
we just include it. This way we don't need to touch the build
system files. */
-#define SLJIT_MALLOC(size) (PUBL(malloc))(size)
-#define SLJIT_FREE(ptr) (PUBL(free))(ptr)
+#define SLJIT_MALLOC(size, allocator_data) (PUBL(malloc))(size)
+#define SLJIT_FREE(ptr, allocator_data) (PUBL(free))(ptr)
#define SLJIT_CONFIG_AUTO 1
#define SLJIT_CONFIG_STATIC 1
#define SLJIT_VERBOSE 0
@@ -179,7 +179,7 @@
typedef struct executable_functions {
void *executable_funcs[JIT_NUMBER_OF_COMPILE_MODES];
- sljit_uw *read_only_data[JIT_NUMBER_OF_COMPILE_MODES];
+ void *read_only_data_heads[JIT_NUMBER_OF_COMPILE_MODES];
sljit_uw executable_sizes[JIT_NUMBER_OF_COMPILE_MODES];
PUBL(jit_callback) callback;
void *userdata;
@@ -322,12 +322,8 @@
pcre_uchar *start;
/* Maps private data offset to each opcode. */
sljit_si *private_data_ptrs;
- /* This read-only data is available during runtime. */
- sljit_uw *read_only_data;
- /* The total size of the read-only data. */
- sljit_uw read_only_data_size;
- /* The next free entry of the read_only_data. */
- sljit_uw *read_only_data_ptr;
+ /* Chain list of read-only data ptrs. */
+ void *read_only_data_head;
/* Tells whether the capturing bracket is optimized. */
pcre_uint8 *optimized_cbracket;
/* Tells whether the starting offset is a target of then. */
@@ -545,7 +541,7 @@
#define READ_CHAR_MAX 0x7fffffff
-static pcre_uchar* bracketend(pcre_uchar* cc)
+static pcre_uchar *bracketend(pcre_uchar *cc)
{
SLJIT_ASSERT((*cc >= OP_ASSERT && *cc <= OP_ASSERTBACK_NOT) || (*cc >= OP_ONCE && *cc <= OP_SCOND));
do cc += GET(cc, 1); while (*cc == OP_ALT);
@@ -554,7 +550,7 @@
return cc;
}
-static int no_alternatives(pcre_uchar* cc)
+static int no_alternatives(pcre_uchar *cc)
{
int count = 0;
SLJIT_ASSERT((*cc >= OP_ASSERT && *cc <= OP_ASSERTBACK_NOT) || (*cc >= OP_ONCE && *cc <= OP_SCOND));
@@ -802,16 +798,6 @@
cc += 1 + IMM2_SIZE;
break;
- case OP_BRA:
- case OP_CBRA:
- case OP_SBRA:
- case OP_SCBRA:
- count = no_alternatives(cc);
- if (count > 4)
- common->read_only_data_size += count * sizeof(sljit_uw);
- cc += 1 + LINK_SIZE + (*cc == OP_CBRA || *cc == OP_SCBRA ? IMM2_SIZE : 0);
- break;
-
case OP_CBRAPOS:
case OP_SCBRAPOS:
common->optimized_cbracket[GET2(cc, 1 + LINK_SIZE)] = 0;
@@ -1237,7 +1223,7 @@
}
/* Returns with a frame_types (always < 0) if no need for frame. */
-static int get_framesize(compiler_common *common, pcre_uchar *cc, pcre_uchar *ccend, BOOL recursive, BOOL* needs_control_head)
+static int get_framesize(compiler_common *common, pcre_uchar *cc, pcre_uchar *ccend, BOOL recursive, BOOL *needs_control_head)
{
int length = 0;
int possessive = 0;
@@ -1547,7 +1533,11 @@
{
case OP_KET:
if (PRIVATE_DATA(cc) != 0)
+ {
private_data_length++;
+ SLJIT_ASSERT(PRIVATE_DATA(cc + 1) != 0);
+ cc += PRIVATE_DATA(cc + 1);
+ }
cc += 1 + LINK_SIZE;
break;
@@ -1562,6 +1552,7 @@
case OP_SBRAPOS:
case OP_SCOND:
private_data_length++;
+ SLJIT_ASSERT(PRIVATE_DATA(cc) != 0);
cc += 1 + LINK_SIZE;
break;
@@ -1724,6 +1715,8 @@
{
count = 1;
srcw[0] = PRIVATE_DATA(cc);
+ SLJIT_ASSERT(PRIVATE_DATA(cc + 1) != 0);
+ cc += PRIVATE_DATA(cc + 1);
}
cc += 1 + LINK_SIZE;
break;
@@ -2030,7 +2023,7 @@
}
}
-static SLJIT_INLINE void add_jump(struct sljit_compiler *compiler, jump_list **list, struct sljit_jump* jump)
+static SLJIT_INLINE void add_jump(struct sljit_compiler *compiler, jump_list **list, struct sljit_jump *jump)
{
jump_list *list_item = sljit_alloc_memory(compiler, sizeof(jump_list));
if (list_item)
@@ -2044,7 +2037,7 @@
static void add_stub(compiler_common *common, struct sljit_jump *start)
{
DEFINE_COMPILER;
-stub_list* list_item = sljit_alloc_memory(compiler, sizeof(stub_list));
+stub_list *list_item = sljit_alloc_memory(compiler, sizeof(stub_list));
if (list_item)
{
@@ -2058,7 +2051,7 @@
static void flush_stubs(compiler_common *common)
{
DEFINE_COMPILER;
-stub_list* list_item = common->stubs;
+stub_list *list_item = common->stubs;
while (list_item)
{
@@ -2089,7 +2082,7 @@
DEFINE_COMPILER;
OP2(SLJIT_SUB | SLJIT_SET_E, COUNT_MATCH, 0, COUNT_MATCH, 0, SLJIT_IMM, 1);
-add_jump(compiler, &common->calllimit, JUMP(SLJIT_C_ZERO));
+add_jump(compiler, &common->calllimit, JUMP(SLJIT_ZERO));
}
static SLJIT_INLINE void allocate_stack(compiler_common *common, int size)
@@ -2105,7 +2098,7 @@
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS0, TMP1, 0);
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS1, TMP1, 0);
#endif
-add_stub(common, CMP(SLJIT_C_GREATER, STACK_TOP, 0, STACK_LIMIT, 0));
+add_stub(common, CMP(SLJIT_GREATER, STACK_TOP, 0, STACK_LIMIT, 0));
}
static SLJIT_INLINE void free_stack(compiler_common *common, int size)
@@ -2114,6 +2107,40 @@
OP2(SLJIT_SUB, STACK_TOP, 0, STACK_TOP, 0, SLJIT_IMM, size * sizeof(sljit_sw));
}
+static sljit_uw * allocate_read_only_data(compiler_common *common, sljit_uw size)
+{
+DEFINE_COMPILER;
+sljit_uw *result;
+
+if (SLJIT_UNLIKELY(sljit_get_compiler_error(compiler)))
+ return NULL;
+
+result = (sljit_uw *)SLJIT_MALLOC(size + sizeof(sljit_uw), compiler->allocator_data);
+if (SLJIT_UNLIKELY(result == NULL))
+ {
+ sljit_set_compiler_memory_error(compiler);
+ return NULL;
+ }
+
+*(void**)result = common->read_only_data_head;
+common->read_only_data_head = (void *)result;
+return result + 1;
+}
+
+static void free_read_only_data(void *current, void *allocator_data)
+{
+void *next;
+
+SLJIT_UNUSED_ARG(allocator_data);
+
+while (current != NULL)
+ {
+ next = *(void**)current;
+ SLJIT_FREE(current, allocator_data);
+ current = next;
+ }
+}
+
static SLJIT_INLINE void reset_ovector(compiler_common *common, int length)
{
DEFINE_COMPILER;
@@ -2136,7 +2163,7 @@
loop = LABEL();
OP1(SLJIT_MOVU, SLJIT_MEM1(SLJIT_R1), sizeof(sljit_sw), SLJIT_R0, 0);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_R2, 0, SLJIT_R2, 0, SLJIT_IMM, 1);
- JUMPTO(SLJIT_C_NOT_ZERO, loop);
+ JUMPTO(SLJIT_NOT_ZERO, loop);
}
}
@@ -2162,7 +2189,7 @@
loop = LABEL();
OP1(SLJIT_MOVU, SLJIT_MEM1(TMP2), sizeof(sljit_sw), TMP1, 0);
OP2(SLJIT_SUB | SLJIT_SET_E, STACK_TOP, 0, STACK_TOP, 0, SLJIT_IMM, 1);
- JUMPTO(SLJIT_C_NOT_ZERO, loop);
+ JUMPTO(SLJIT_NOT_ZERO, loop);
}
OP1(SLJIT_MOV, STACK_TOP, 0, ARGUMENTS, 0);
@@ -2218,7 +2245,7 @@
OP1(SLJIT_MOV, SLJIT_R0, 0, SLJIT_MEM1(SLJIT_R0), SLJIT_OFFSETOF(jit_arguments, begin));
GET_LOCAL_BASE(SLJIT_S0, 0, OVECTOR_START);
/* Unlikely, but possible */
-early_quit = CMP(SLJIT_C_EQUAL, SLJIT_R1, 0, SLJIT_IMM, 0);
+early_quit = CMP(SLJIT_EQUAL, SLJIT_R1, 0, SLJIT_IMM, 0);
loop = LABEL();
OP2(SLJIT_SUB, SLJIT_S1, 0, SLJIT_MEM1(SLJIT_S0), 0, SLJIT_R0, 0);
OP2(SLJIT_ADD, SLJIT_S0, 0, SLJIT_S0, 0, SLJIT_IMM, sizeof(sljit_sw));
@@ -2228,7 +2255,7 @@
#endif
OP1(SLJIT_MOVU_SI, SLJIT_MEM1(SLJIT_R2), sizeof(int), SLJIT_S1, 0);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_R1, 0, SLJIT_R1, 0, SLJIT_IMM, 1);
-JUMPTO(SLJIT_C_NOT_ZERO, loop);
+JUMPTO(SLJIT_NOT_ZERO, loop);
JUMPHERE(early_quit);
/* Calculate the return value, which is the maximum ovector value. */
@@ -2241,7 +2268,7 @@
loop = LABEL();
OP1(SLJIT_MOVU, SLJIT_R2, 0, SLJIT_MEM1(SLJIT_R0), -(2 * (sljit_sw)sizeof(sljit_sw)));
OP2(SLJIT_SUB, SLJIT_R1, 0, SLJIT_R1, 0, SLJIT_IMM, 1);
- CMPTO(SLJIT_C_EQUAL, SLJIT_R2, 0, SLJIT_S2, 0, loop);
+ CMPTO(SLJIT_EQUAL, SLJIT_R2, 0, SLJIT_S2, 0, loop);
OP1(SLJIT_MOV, SLJIT_RETURN_REG, 0, SLJIT_R1, 0);
}
else
@@ -2260,13 +2287,13 @@
OP1(SLJIT_MOV, SLJIT_R1, 0, ARGUMENTS, 0);
OP1(SLJIT_MOV, SLJIT_RETURN_REG, 0, SLJIT_IMM, PCRE_ERROR_PARTIAL);
OP1(SLJIT_MOV_SI, SLJIT_R2, 0, SLJIT_MEM1(SLJIT_R1), SLJIT_OFFSETOF(jit_arguments, real_offset_count));
-CMPTO(SLJIT_C_SIG_LESS, SLJIT_R2, 0, SLJIT_IMM, 2, quit);
+CMPTO(SLJIT_SIG_LESS, SLJIT_R2, 0, SLJIT_IMM, 2, quit);
/* Store match begin and end. */
OP1(SLJIT_MOV, SLJIT_S0, 0, SLJIT_MEM1(SLJIT_R1), SLJIT_OFFSETOF(jit_arguments, begin));
OP1(SLJIT_MOV, SLJIT_R1, 0, SLJIT_MEM1(SLJIT_R1), SLJIT_OFFSETOF(jit_arguments, offsets));
-jump = CMP(SLJIT_C_SIG_LESS, SLJIT_R2, 0, SLJIT_IMM, 3);
+jump = CMP(SLJIT_SIG_LESS, SLJIT_R2, 0, SLJIT_IMM, 3);
OP2(SLJIT_SUB, SLJIT_R2, 0, SLJIT_MEM1(SLJIT_SP), common->mode == JIT_PARTIAL_HARD_COMPILE ? common->start_ptr : (common->hit_start + (int)sizeof(sljit_sw)), SLJIT_S0, 0);
#if defined COMPILE_PCRE16 || defined COMPILE_PCRE32
OP2(SLJIT_ASHR, SLJIT_R2, 0, SLJIT_R2, 0, SLJIT_IMM, UCHAR_SHIFT);
@@ -2302,19 +2329,19 @@
OP2(SLJIT_ADD, TMP1, 0, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, SLJIT_IMM, 1);
/* Jumps if start_used_ptr < STR_PTR, or start_used_ptr == -1. Although overwriting
is not necessary if start_used_ptr == STR_PTR, it does not hurt as well. */
- jump = CMP(SLJIT_C_LESS_EQUAL, TMP1, 0, STR_PTR, 0);
+ jump = CMP(SLJIT_LESS_EQUAL, TMP1, 0, STR_PTR, 0);
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0);
JUMPHERE(jump);
}
else if (common->mode == JIT_PARTIAL_HARD_COMPILE)
{
- jump = CMP(SLJIT_C_LESS_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0);
+ jump = CMP(SLJIT_LESS_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0);
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0);
JUMPHERE(jump);
}
}
-static SLJIT_INLINE BOOL char_has_othercase(compiler_common *common, pcre_uchar* cc)
+static SLJIT_INLINE BOOL char_has_othercase(compiler_common *common, pcre_uchar *cc)
{
/* Detects if the character has an othercase. */
unsigned int c;
@@ -2357,7 +2384,7 @@
return TABLE_GET(c, common->fcc, c);
}
-static unsigned int char_get_othercase_bit(compiler_common *common, pcre_uchar* cc)
+static unsigned int char_get_othercase_bit(compiler_common *common, pcre_uchar *cc)
{
/* Detects if the character and its othercase has only 1 bit difference. */
unsigned int c, oc, bit;
@@ -2445,9 +2472,9 @@
return;
if (!force)
- jump = CMP(SLJIT_C_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0);
+ jump = CMP(SLJIT_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0);
else if (common->mode == JIT_PARTIAL_SOFT_COMPILE)
- jump = CMP(SLJIT_C_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, SLJIT_IMM, -1);
+ jump = CMP(SLJIT_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, SLJIT_IMM, -1);
if (common->mode == JIT_PARTIAL_SOFT_COMPILE)
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, 0);
@@ -2471,20 +2498,20 @@
if (common->mode == JIT_COMPILE)
{
- add_jump(compiler, end_reached, CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
+ add_jump(compiler, end_reached, CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
return;
}
-jump = CMP(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0);
+jump = CMP(SLJIT_LESS, STR_PTR, 0, STR_END, 0);
if (common->mode == JIT_PARTIAL_SOFT_COMPILE)
{
- add_jump(compiler, end_reached, CMP(SLJIT_C_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0));
+ add_jump(compiler, end_reached, CMP(SLJIT_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0));
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, 0);
add_jump(compiler, end_reached, JUMP(SLJIT_JUMP));
}
else
{
- add_jump(compiler, end_reached, CMP(SLJIT_C_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0));
+ add_jump(compiler, end_reached, CMP(SLJIT_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0));
if (common->partialmatchlabel != NULL)
JUMPTO(SLJIT_JUMP, common->partialmatchlabel);
else
@@ -2500,13 +2527,13 @@
if (common->mode == JIT_COMPILE)
{
- add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
return;
}
/* Partial matching mode. */
-jump = CMP(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0);
-add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0));
+jump = CMP(SLJIT_LESS, STR_PTR, 0, STR_END, 0);
+add_jump(compiler, backtracks, CMP(SLJIT_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0));
if (common->mode == JIT_PARTIAL_SOFT_COMPILE)
{
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, 0);
@@ -2539,7 +2566,7 @@
{
if (max < 128) return;
- jump = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
+ jump = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
add_jump(compiler, &common->utfreadchar, JUMP(SLJIT_FAST_CALL));
OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
@@ -2553,7 +2580,7 @@
if (max < 0xd800) return;
OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, 0xd800);
- jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
+ jump = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
/* TMP2 contains the high surrogate. */
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
OP2(SLJIT_ADD, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x40);
@@ -2572,7 +2599,7 @@
/* Tells whether the character codes below 128 are enough
to determine a match. */
const pcre_uint8 value = nclass ? 0xff : 0;
-const pcre_uint8* end = bitset + 32;
+const pcre_uint8 *end = bitset + 32;
bitset += 16;
do
@@ -2601,7 +2628,7 @@
if (full_read)
{
- jump = CMP(SLJIT_C_LESS, TMP2, 0, SLJIT_IMM, 0xc0);
+ jump = CMP(SLJIT_LESS, TMP2, 0, SLJIT_IMM, 0xc0);
OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP2), (sljit_sw)PRIV(utf8_table4) - 0xc0);
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
JUMPHERE(jump);
@@ -2636,14 +2663,14 @@
{
if (max < 128 && !update_str_ptr) return;
- jump = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
+ jump = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
if (min >= 0x10000)
{
OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, 0xf0);
if (update_str_ptr)
OP1(SLJIT_MOV_UB, RETURN_ADDR, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
- jump2 = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0x7);
+ jump2 = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 0x7);
OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 6);
OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3f);
OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
@@ -2667,7 +2694,7 @@
if (update_str_ptr)
OP1(SLJIT_MOV_UB, RETURN_ADDR, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
- jump2 = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0xf);
+ jump2 = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 0xf);
OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 6);
OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3f);
OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
@@ -2712,7 +2739,7 @@
if (max >= 0x10000)
{
OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, 0xd800);
- jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
+ jump = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
/* TMP2 contains the high surrogate. */
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
OP2(SLJIT_ADD, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x40);
@@ -2728,7 +2755,7 @@
/* Skip low surrogate if necessary. */
OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, 0xd800);
- jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
+ jump = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
if (update_str_ptr)
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
if (max >= 0xd800)
@@ -2765,7 +2792,7 @@
/* This can be an extra read in some situations, but hopefully
it is needed in most cases. */
OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP2), common->ctypes);
- jump = CMP(SLJIT_C_LESS, TMP2, 0, SLJIT_IMM, 0xc0);
+ jump = CMP(SLJIT_LESS, TMP2, 0, SLJIT_IMM, 0xc0);
if (!update_str_ptr)
{
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
@@ -2775,7 +2802,7 @@
OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3f);
OP2(SLJIT_OR, TMP2, 0, TMP2, 0, TMP1, 0);
OP1(SLJIT_MOV, TMP1, 0, SLJIT_IMM, 0);
- jump2 = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 255);
+ jump2 = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 255);
OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP2), common->ctypes);
JUMPHERE(jump2);
}
@@ -2789,7 +2816,7 @@
#if !defined COMPILE_PCRE8
/* The ctypes array contains only 256 values. */
OP1(SLJIT_MOV, TMP1, 0, SLJIT_IMM, 0);
-jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 255);
+jump = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 255);
#endif
OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP2), common->ctypes);
#if !defined COMPILE_PCRE8
@@ -2801,7 +2828,7 @@
{
/* Skip low surrogate if necessary. */
OP2(SLJIT_SUB, TMP2, 0, TMP2, 0, SLJIT_IMM, 0xd800);
- jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
+ jump = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
JUMPHERE(jump);
}
@@ -2822,7 +2849,7 @@
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), -IN_UCHARS(1));
OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0xc0);
- CMPTO(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, 0x80, label);
+ CMPTO(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, 0x80, label);
return;
}
#elif defined COMPILE_PCRE16
@@ -2833,7 +2860,7 @@
/* Skip low surrogate if necessary. */
OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0xfc00);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xdc00);
- OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
return;
@@ -2852,26 +2879,26 @@
if (nltype == NLTYPE_ANY)
{
add_jump(compiler, &common->anynewline, JUMP(SLJIT_FAST_CALL));
- add_jump(compiler, backtracks, JUMP(jumpifmatch ? SLJIT_C_NOT_ZERO : SLJIT_C_ZERO));
+ add_jump(compiler, backtracks, JUMP(jumpifmatch ? SLJIT_NOT_ZERO : SLJIT_ZERO));
}
else if (nltype == NLTYPE_ANYCRLF)
{
if (jumpifmatch)
{
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR));
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL));
}
else
{
- jump = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL));
+ jump = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL));
JUMPHERE(jump);
}
}
else
{
SLJIT_ASSERT(nltype == NLTYPE_FIXED && common->newline < 256);
- add_jump(compiler, backtracks, CMP(jumpifmatch ? SLJIT_C_EQUAL : SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, common->newline));
+ add_jump(compiler, backtracks, CMP(jumpifmatch ? SLJIT_EQUAL : SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, common->newline));
}
}
@@ -2894,7 +2921,7 @@
/* Searching for the first zero. */
OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x800);
-jump = JUMP(SLJIT_C_NOT_ZERO);
+jump = JUMP(SLJIT_NOT_ZERO);
/* Two byte sequence. */
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, IN_UCHARS(2));
@@ -2908,7 +2935,7 @@
OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x10000);
-jump = JUMP(SLJIT_C_NOT_ZERO);
+jump = JUMP(SLJIT_NOT_ZERO);
/* Three byte sequence. */
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(2));
OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, IN_UCHARS(3));
@@ -2942,14 +2969,14 @@
/* Searching for the first zero. */
OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x800);
-jump = JUMP(SLJIT_C_NOT_ZERO);
+jump = JUMP(SLJIT_NOT_ZERO);
/* Two byte sequence. */
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
JUMPHERE(jump);
OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x400);
-OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_NOT_ZERO);
+OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_NOT_ZERO);
/* This code runs only in 8 bit mode. No need to shift the value. */
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
@@ -2973,13 +3000,13 @@
sljit_emit_fast_enter(compiler, RETURN_ADDR, 0);
OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP2, 0, SLJIT_IMM, 0x20);
-jump = JUMP(SLJIT_C_NOT_ZERO);
+jump = JUMP(SLJIT_NOT_ZERO);
/* Two byte sequence. */
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x1f);
/* The upper 5 bits are known at this point. */
-compare = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0x3);
+compare = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 0x3);
OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 6);
OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3f);
OP2(SLJIT_OR, TMP2, 0, TMP2, 0, TMP1, 0);
@@ -3059,23 +3086,23 @@
{
mainloop = LABEL();
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
- end = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+ end = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(-1));
OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
- CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff, mainloop);
- CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff, mainloop);
+ CMPTO(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff, mainloop);
+ CMPTO(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff, mainloop);
JUMPHERE(end);
OP2(SLJIT_SUB, SLJIT_MEM1(SLJIT_SP), common->first_line_end, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
}
else
{
- end = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+ end = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
mainloop = LABEL();
/* Continual stores does not cause data dependency. */
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->first_line_end, STR_PTR, 0);
read_char_range(common, common->nlmin, common->nlmax, TRUE);
check_newlinechar(common, common->nltype, &newline, TRUE);
- CMPTO(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0, mainloop);
+ CMPTO(SLJIT_LESS, STR_PTR, 0, STR_END, 0, mainloop);
JUMPHERE(end);
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->first_line_end, STR_PTR, 0);
set_jumps(newline, LABEL());
@@ -3090,10 +3117,10 @@
{
newlinelabel = LABEL();
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
- end = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+ end = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, common->newline & 0xff);
- OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
#if defined COMPILE_PCRE16 || defined COMPILE_PCRE32
OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, UCHAR_SHIFT);
#endif
@@ -3113,14 +3140,14 @@
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
if (newlinecheck)
- CMPTO(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff, newlinelabel);
+ CMPTO(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff, newlinelabel);
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
#if defined SUPPORT_UTF && !defined COMPILE_PCRE32
#if defined COMPILE_PCRE8
if (common->utf)
{
- singlechar = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
+ singlechar = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
JUMPHERE(singlechar);
@@ -3128,10 +3155,10 @@
#elif defined COMPILE_PCRE16
if (common->utf)
{
- singlechar = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xd800);
+ singlechar = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xd800);
OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0xfc00);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xd800);
- OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
JUMPHERE(singlechar);
@@ -3530,9 +3557,6 @@
sljit_ub *update_table = NULL;
BOOL in_range;
-/* This is even TRUE, if both are NULL. */
-SLJIT_ASSERT(common->read_only_data_ptr == common->read_only_data);
-
for (i = 0; i < MAX_N_CHARS; i++)
{
chars[i << 1] = NOTACHAR;
@@ -3581,18 +3605,9 @@
if (range_right >= 0)
{
- /* Since no data is consumed (see the assert in the beginning
- of this function), this space can be reallocated. */
- if (common->read_only_data)
- SLJIT_FREE(common->read_only_data);
-
- common->read_only_data_size += 256;
- common->read_only_data = (sljit_uw *)SLJIT_MALLOC(common->read_only_data_size);
- if (common->read_only_data == NULL)
+ update_table = (sljit_ub *)allocate_read_only_data(common, 256);
+ if (update_table == NULL)
return TRUE;
-
- update_table = (sljit_ub *)common->read_only_data;
- common->read_only_data_ptr = (sljit_uw *)(update_table + 256);
memset(update_table, IN_UCHARS(range_len), 256);
for (i = 0; i < range_len; i++)
@@ -3683,7 +3698,7 @@
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), common->first_line_end);
OP1(SLJIT_MOV, TMP3, 0, STR_END, 0);
OP2(SLJIT_SUB, STR_END, 0, STR_END, 0, SLJIT_IMM, IN_UCHARS(max));
- quit = CMP(SLJIT_C_LESS_EQUAL, STR_END, 0, TMP1, 0);
+ quit = CMP(SLJIT_LESS_EQUAL, STR_END, 0, TMP1, 0);
OP1(SLJIT_MOV, STR_END, 0, TMP1, 0);
JUMPHERE(quit);
}
@@ -3696,7 +3711,7 @@
#endif
start = LABEL();
-quit = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+quit = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
SLJIT_ASSERT(range_right >= 0 || offsets[0] >= 0);
@@ -3714,7 +3729,7 @@
OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)update_table);
#endif
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
- CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0, start);
+ CMPTO(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0, start);
}
if (offsets[0] >= 0)
@@ -3726,7 +3741,7 @@
if (chars[1] != 0)
OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, chars[1]);
- CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, chars[0], start);
+ CMPTO(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, chars[0], start);
if (offsets[2] >= 0)
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(offsets[2] - 1));
@@ -3734,14 +3749,14 @@
{
if (chars[5] != 0)
OP2(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_IMM, chars[5]);
- CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, chars[4], start);
+ CMPTO(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, chars[4], start);
}
if (offsets[2] >= 0)
{
if (chars[3] != 0)
OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, chars[3]);
- CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, chars[2], start);
+ CMPTO(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, chars[2], start);
}
OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
}
@@ -3755,7 +3770,7 @@
OP1(SLJIT_MOV, STR_END, 0, TMP3, 0);
if (range_right >= 0)
{
- quit = CMP(SLJIT_C_LESS_EQUAL, STR_PTR, 0, TMP1, 0);
+ quit = CMP(SLJIT_LESS_EQUAL, STR_PTR, 0, TMP1, 0);
OP1(SLJIT_MOV, STR_PTR, 0, TMP1, 0);
JUMPHERE(quit);
}
@@ -3784,7 +3799,7 @@
}
start = LABEL();
-quit = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+quit = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
oc = first_char;
@@ -3797,22 +3812,22 @@
#endif
}
if (first_char == oc)
- found = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, first_char);
+ found = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, first_char);
else
{
bit = first_char ^ oc;
if (is_powerof2(bit))
{
OP2(SLJIT_OR, TMP2, 0, TMP1, 0, SLJIT_IMM, bit);
- found = CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, first_char | bit);
+ found = CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, first_char | bit);
}
else
{
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, first_char);
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, oc);
- OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
- found = JUMP(SLJIT_C_NOT_ZERO);
+ OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
+ found = JUMP(SLJIT_NOT_ZERO);
}
}
@@ -3845,15 +3860,15 @@
if (common->nltype == NLTYPE_FIXED && common->newline > 255)
{
- lastchar = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+ lastchar = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, str));
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, begin));
- firstchar = CMP(SLJIT_C_LESS_EQUAL, STR_PTR, 0, TMP2, 0);
+ firstchar = CMP(SLJIT_LESS_EQUAL, STR_PTR, 0, TMP2, 0);
OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, IN_UCHARS(2));
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, STR_PTR, 0, TMP1, 0);
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_GREATER_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_GREATER_EQUAL);
#if defined COMPILE_PCRE16 || defined COMPILE_PCRE32
OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, UCHAR_SHIFT);
#endif
@@ -3861,11 +3876,11 @@
loop = LABEL();
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
- quit = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+ quit = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(-2));
OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(-1));
- CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff, loop);
- CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff, loop);
+ CMPTO(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff, loop);
+ CMPTO(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff, loop);
JUMPHERE(quit);
JUMPHERE(firstchar);
@@ -3878,16 +3893,16 @@
OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, str));
-firstchar = CMP(SLJIT_C_LESS_EQUAL, STR_PTR, 0, TMP2, 0);
+firstchar = CMP(SLJIT_LESS_EQUAL, STR_PTR, 0, TMP2, 0);
skip_char_back(common);
loop = LABEL();
common->ff_newline_shortcut = loop;
read_char_range(common, common->nlmin, common->nlmax, TRUE);
-lastchar = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+lastchar = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
if (common->nltype == NLTYPE_ANY || common->nltype == NLTYPE_ANYCRLF)
- foundcr = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
+ foundcr = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
check_newlinechar(common, common->nltype, &newline, FALSE);
set_jumps(newline, loop);
@@ -3895,10 +3910,10 @@
{
quit = JUMP(SLJIT_JUMP);
JUMPHERE(foundcr);
- notfoundnl = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+ notfoundnl = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, CHAR_NL);
- OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
#if defined COMPILE_PCRE16 || defined COMPILE_PCRE32
OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, UCHAR_SHIFT);
#endif
@@ -3934,7 +3949,7 @@
}
start = LABEL();
-quit = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+quit = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
#ifdef SUPPORT_UTF
if (common->utf)
@@ -3944,7 +3959,7 @@
if (!check_class_ranges(common, start_bits, (start_bits[31] & 0x80) != 0, TRUE, &matches))
{
#ifndef COMPILE_PCRE8
- jump = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 255);
+ jump = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 255);
OP1(SLJIT_MOV, TMP1, 0, SLJIT_IMM, 255);
JUMPHERE(jump);
#endif
@@ -3953,7 +3968,7 @@
OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)start_bits);
OP2(SLJIT_SHL, TMP2, 0, SLJIT_IMM, 1, TMP2, 0);
OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
- found = JUMP(SLJIT_C_NOT_ZERO);
+ found = JUMP(SLJIT_NOT_ZERO);
}
#ifdef SUPPORT_UTF
@@ -3965,17 +3980,17 @@
#if defined COMPILE_PCRE8
if (common->utf)
{
- CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xc0, start);
+ CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xc0, start);
OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
}
#elif defined COMPILE_PCRE16
if (common->utf)
{
- CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xd800, start);
+ CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xd800, start);
OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0xfc00);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xd800);
- OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
}
@@ -4006,8 +4021,8 @@
SLJIT_ASSERT(common->req_char_ptr != 0);
OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(SLJIT_SP), common->req_char_ptr);
OP2(SLJIT_ADD, TMP1, 0, STR_PTR, 0, SLJIT_IMM, REQ_BYTE_MAX);
-toolong = CMP(SLJIT_C_LESS, TMP1, 0, STR_END, 0);
-alreadyfound = CMP(SLJIT_C_LESS, STR_PTR, 0, TMP2, 0);
+toolong = CMP(SLJIT_LESS, TMP1, 0, STR_END, 0);
+alreadyfound = CMP(SLJIT_LESS, STR_PTR, 0, TMP2, 0);
if (has_firstchar)
OP2(SLJIT_ADD, TMP1, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
@@ -4015,7 +4030,7 @@
OP1(SLJIT_MOV, TMP1, 0, STR_PTR, 0);
loop = LABEL();
-notfound = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, STR_END, 0);
+notfound = CMP(SLJIT_GREATER_EQUAL, TMP1, 0, STR_END, 0);
OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(TMP1), 0);
oc = req_char;
@@ -4028,19 +4043,19 @@
#endif
}
if (req_char == oc)
- found = CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, req_char);
+ found = CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, req_char);
else
{
bit = req_char ^ oc;
if (is_powerof2(bit))
{
OP2(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_IMM, bit);
- found = CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, req_char | bit);
+ found = CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, req_char | bit);
}
else
{
- found = CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, req_char);
- foundoc = CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, oc);
+ found = CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, req_char);
+ foundoc = CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, oc);
}
}
OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, IN_UCHARS(1));
@@ -4069,7 +4084,7 @@
mainloop = LABEL();
OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP1), 0);
OP2(SLJIT_SUB | SLJIT_SET_S, SLJIT_UNUSED, 0, TMP2, 0, SLJIT_IMM, 0);
-jump = JUMP(SLJIT_C_SIG_LESS_EQUAL);
+jump = JUMP(SLJIT_SIG_LESS_EQUAL);
OP2(SLJIT_ADD, TMP2, 0, TMP2, 0, TMP3, 0);
OP1(SLJIT_MOV, SLJIT_MEM1(TMP2), 0, SLJIT_MEM1(TMP1), sizeof(sljit_sw));
@@ -4078,7 +4093,7 @@
JUMPTO(SLJIT_JUMP, mainloop);
JUMPHERE(jump);
-jump = JUMP(SLJIT_C_SIG_LESS);
+jump = JUMP(SLJIT_SIG_LESS);
/* End of dropping frames. */
sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
@@ -4106,7 +4121,7 @@
OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, begin));
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS1, SLJIT_IMM, 0);
-skipread = CMP(SLJIT_C_LESS_EQUAL, STR_PTR, 0, TMP1, 0);
+skipread = CMP(SLJIT_LESS_EQUAL, STR_PTR, 0, TMP1, 0);
skip_char_back(common);
check_start_used_ptr(common);
read_char(common);
@@ -4116,14 +4131,14 @@
if (common->use_ucp)
{
OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, 1);
- jump = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_UNDERSCORE);
+ jump = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_UNDERSCORE);
add_jump(compiler, &common->getucd, JUMP(SLJIT_FAST_CALL));
OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ucp_Ll);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ucp_Lu - ucp_Ll);
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ucp_Nd - ucp_Ll);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ucp_No - ucp_Nd);
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
JUMPHERE(jump);
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS1, TMP2, 0);
}
@@ -4131,12 +4146,12 @@
#endif
{
#ifndef COMPILE_PCRE8
- jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+ jump = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
#elif defined SUPPORT_UTF
/* Here LOCALS1 has already been zeroed. */
jump = NULL;
if (common->utf)
- jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+ jump = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
#endif /* COMPILE_PCRE8 */
OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), common->ctypes);
OP2(SLJIT_LSHR, TMP1, 0, TMP1, 0, SLJIT_IMM, 4 /* ctype_word */);
@@ -4160,14 +4175,14 @@
if (common->use_ucp)
{
OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, 1);
- jump = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_UNDERSCORE);
+ jump = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_UNDERSCORE);
add_jump(compiler, &common->getucd, JUMP(SLJIT_FAST_CALL));
OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ucp_Ll);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ucp_Lu - ucp_Ll);
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ucp_Nd - ucp_Ll);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ucp_No - ucp_Nd);
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
JUMPHERE(jump);
}
else
@@ -4176,12 +4191,12 @@
#ifndef COMPILE_PCRE8
/* TMP2 may be destroyed by peek_char. */
OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, 0);
- jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+ jump = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
#elif defined SUPPORT_UTF
OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, 0);
jump = NULL;
if (common->utf)
- jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+ jump = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
#endif
OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP1), common->ctypes);
OP2(SLJIT_LSHR, TMP2, 0, TMP2, 0, SLJIT_IMM, 4 /* ctype_word */);
@@ -4256,41 +4271,41 @@
return TRUE;
case 1:
- add_jump(compiler, backtracks, CMP(bit == 0 ? SLJIT_C_LESS : SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
+ add_jump(compiler, backtracks, CMP(bit == 0 ? SLJIT_LESS : SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
return TRUE;
case 2:
if (ranges[0] + 1 != ranges[1])
{
OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[0]);
- add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_C_LESS : SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
+ add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_LESS : SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
}
else
- add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_C_EQUAL : SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
+ add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_EQUAL : SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
return TRUE;
case 3:
if (bit != 0)
{
- add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2]));
+ add_jump(compiler, backtracks, CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2]));
if (ranges[0] + 1 != ranges[1])
{
OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[0]);
- add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
+ add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
}
else
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
return TRUE;
}
- add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[0]));
+ add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, ranges[0]));
if (ranges[1] + 1 != ranges[2])
{
OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[1]);
- add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[2] - ranges[1]));
+ add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, ranges[2] - ranges[1]));
}
else
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[1]));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[1]));
return TRUE;
case 4:
@@ -4302,10 +4317,10 @@
if (ranges[2] + 1 != ranges[3])
{
OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[2]);
- add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_C_LESS : SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[2]));
+ add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_LESS : SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[2]));
}
else
- add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_C_EQUAL : SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2]));
+ add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_EQUAL : SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2]));
return TRUE;
}
@@ -4315,31 +4330,31 @@
if (ranges[0] + 1 != ranges[1])
{
OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[0]);
- add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
+ add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
i = ranges[0];
}
else
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
if (ranges[2] + 1 != ranges[3])
{
OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[2] - i);
- add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[2]));
+ add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[2]));
}
else
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2] - i));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2] - i));
return TRUE;
}
OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[0]);
- add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[0]));
+ add_jump(compiler, backtracks, CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[0]));
if (ranges[1] + 1 != ranges[2])
{
OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]);
- add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[2] - ranges[1]));
+ add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, ranges[2] - ranges[1]));
}
else
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
return TRUE;
default:
@@ -4357,21 +4372,21 @@
OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x0a);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x0d - 0x0a);
-OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x85 - 0x0a);
#if defined SUPPORT_UTF || defined COMPILE_PCRE16 || defined COMPILE_PCRE32
#ifdef COMPILE_PCRE8
if (common->utf)
{
#endif
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x1);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x2029 - 0x0a);
#ifdef COMPILE_PCRE8
}
#endif
#endif /* SUPPORT_UTF || COMPILE_PCRE16 || COMPILE_PCRE32 */
-OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
}
@@ -4383,33 +4398,33 @@
sljit_emit_fast_enter(compiler, RETURN_ADDR, 0);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x09);
-OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x20);
-OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xa0);
#if defined SUPPORT_UTF || defined COMPILE_PCRE16 || defined COMPILE_PCRE32
#ifdef COMPILE_PCRE8
if (common->utf)
{
#endif
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x1680);
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x180e);
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x2000);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x200A - 0x2000);
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x202f - 0x2000);
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x205f - 0x2000);
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x3000 - 0x2000);
#ifdef COMPILE_PCRE8
}
#endif
#endif /* SUPPORT_UTF || COMPILE_PCRE16 || COMPILE_PCRE32 */
-OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
}
@@ -4423,21 +4438,21 @@
OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x0a);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x0d - 0x0a);
-OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x85 - 0x0a);
#if defined SUPPORT_UTF || defined COMPILE_PCRE16 || defined COMPILE_PCRE32
#ifdef COMPILE_PCRE8
if (common->utf)
{
#endif
- OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x1);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x2029 - 0x0a);
#ifdef COMPILE_PCRE8
}
#endif
#endif /* SUPPORT_UTF || COMPILE_PCRE16 || COMPILE_PCRE32 */
-OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
}
@@ -4461,9 +4476,9 @@
label = LABEL();
OP1(MOVU_UCHAR, CHAR1, 0, SLJIT_MEM1(TMP1), IN_UCHARS(1));
OP1(MOVU_UCHAR, CHAR2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
-jump = CMP(SLJIT_C_NOT_EQUAL, CHAR1, 0, CHAR2, 0);
+jump = CMP(SLJIT_NOT_EQUAL, CHAR1, 0, CHAR2, 0);
OP2(SLJIT_SUB | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_IMM, IN_UCHARS(1));
-JUMPTO(SLJIT_C_NOT_ZERO, label);
+JUMPTO(SLJIT_NOT_ZERO, label);
JUMPHERE(jump);
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
@@ -4494,20 +4509,20 @@
OP1(MOVU_UCHAR, CHAR1, 0, SLJIT_MEM1(TMP1), IN_UCHARS(1));
OP1(MOVU_UCHAR, CHAR2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
#ifndef COMPILE_PCRE8
-jump = CMP(SLJIT_C_GREATER, CHAR1, 0, SLJIT_IMM, 255);
+jump = CMP(SLJIT_GREATER, CHAR1, 0, SLJIT_IMM, 255);
#endif
OP1(SLJIT_MOV_UB, CHAR1, 0, SLJIT_MEM2(LCC_TABLE, CHAR1), 0);
#ifndef COMPILE_PCRE8
JUMPHERE(jump);
-jump = CMP(SLJIT_C_GREATER, CHAR2, 0, SLJIT_IMM, 255);
+jump = CMP(SLJIT_GREATER, CHAR2, 0, SLJIT_IMM, 255);
#endif
OP1(SLJIT_MOV_UB, CHAR2, 0, SLJIT_MEM2(LCC_TABLE, CHAR2), 0);
#ifndef COMPILE_PCRE8
JUMPHERE(jump);
#endif
-jump = CMP(SLJIT_C_NOT_EQUAL, CHAR1, 0, CHAR2, 0);
+jump = CMP(SLJIT_NOT_EQUAL, CHAR1, 0, CHAR2, 0);
OP2(SLJIT_SUB | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_IMM, IN_UCHARS(1));
-JUMPTO(SLJIT_C_NOT_ZERO, label);
+JUMPTO(SLJIT_NOT_ZERO, label);
JUMPHERE(jump);
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
@@ -4555,7 +4570,7 @@
#endif /* SUPPORT_UTF && SUPPORT_UCP */
static pcre_uchar *byte_sequence_compare(compiler_common *common, BOOL caseless, pcre_uchar *cc,
- compare_context* context, jump_list **backtracks)
+ compare_context *context, jump_list **backtracks)
{
DEFINE_COMPILER;
unsigned int othercasebit = 0;
@@ -4655,20 +4670,20 @@
case 4 / sizeof(pcre_uchar):
if (context->oc.asint != 0)
OP2(SLJIT_OR, context->sourcereg, 0, context->sourcereg, 0, SLJIT_IMM, context->oc.asint);
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, context->c.asint | context->oc.asint));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, context->c.asint | context->oc.asint));
break;
case 2 / sizeof(pcre_uchar):
if (context->oc.asushort != 0)
OP2(SLJIT_OR, context->sourcereg, 0, context->sourcereg, 0, SLJIT_IMM, context->oc.asushort);
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, context->c.asushort | context->oc.asushort));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, context->c.asushort | context->oc.asushort));
break;
#ifdef COMPILE_PCRE8
case 1:
if (context->oc.asbyte != 0)
OP2(SLJIT_OR, context->sourcereg, 0, context->sourcereg, 0, SLJIT_IMM, context->oc.asbyte);
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, context->c.asbyte | context->oc.asbyte));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, context->c.asbyte | context->oc.asbyte));
break;
#endif
@@ -4690,10 +4705,10 @@
if (othercasebit != 0 && othercasechar == cc)
{
OP2(SLJIT_OR, context->sourcereg, 0, context->sourcereg, 0, SLJIT_IMM, othercasebit);
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, *cc | othercasebit));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, *cc | othercasebit));
}
else
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, *cc));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, *cc));
#endif
@@ -4854,7 +4869,7 @@
{
if ((cc[-1] & XCL_MAP) != 0)
{
- jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+ jump = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
if (!check_class_ranges(common, (const pcre_uint8 *)cc, (((const pcre_uint8 *)cc)[31] & 0x80) != 0, TRUE, &found))
{
OP2(SLJIT_AND, TMP2, 0, TMP1, 0, SLJIT_IMM, 0x7);
@@ -4862,7 +4877,7 @@
OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)cc);
OP2(SLJIT_SHL, TMP2, 0, SLJIT_IMM, 1, TMP2, 0);
OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
- add_jump(compiler, &found, JUMP(SLJIT_C_NOT_ZERO));
+ add_jump(compiler, &found, JUMP(SLJIT_NOT_ZERO));
}
add_jump(compiler, backtracks, JUMP(SLJIT_JUMP));
@@ -4873,7 +4888,7 @@
else
{
OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, min);
- add_jump(compiler, (cc[-1] & XCL_NOT) == 0 ? backtracks : &found, CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, max - min));
+ add_jump(compiler, (cc[-1] & XCL_NOT) == 0 ? backtracks : &found, CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, max - min));
}
}
else if ((cc[-1] & XCL_MAP) != 0)
@@ -4887,14 +4902,14 @@
#ifdef COMPILE_PCRE8
SLJIT_ASSERT(common->utf);
#endif
- jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+ jump = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
OP2(SLJIT_AND, TMP2, 0, TMP1, 0, SLJIT_IMM, 0x7);
OP2(SLJIT_LSHR, TMP1, 0, TMP1, 0, SLJIT_IMM, 3);
OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)cc);
OP2(SLJIT_SHL, TMP2, 0, SLJIT_IMM, 1, TMP2, 0);
OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
- add_jump(compiler, list, JUMP(SLJIT_C_NOT_ZERO));
+ add_jump(compiler, list, JUMP(SLJIT_NOT_ZERO));
JUMPHERE(jump);
}
@@ -4964,19 +4979,19 @@
if (numberofcmps < 3 && (*cc == XCL_SINGLE || *cc == XCL_RANGE))
{
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
- OP_FLAGS(numberofcmps == 0 ? SLJIT_MOV : SLJIT_OR, TMP2, 0, numberofcmps == 0 ? SLJIT_UNUSED : TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(numberofcmps == 0 ? SLJIT_MOV : SLJIT_OR, TMP2, 0, numberofcmps == 0 ? SLJIT_UNUSED : TMP2, 0, SLJIT_EQUAL);
numberofcmps++;
}
else if (numberofcmps > 0)
{
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
- OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
- jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+ OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
+ jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
numberofcmps = 0;
}
else
{
- jump = CMP(SLJIT_C_EQUAL ^ invertcmp, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
+ jump = CMP(SLJIT_EQUAL ^ invertcmp, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
numberofcmps = 0;
}
}
@@ -4990,19 +5005,19 @@
if (numberofcmps < 3 && (*cc == XCL_SINGLE || *cc == XCL_RANGE))
{
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
- OP_FLAGS(numberofcmps == 0 ? SLJIT_MOV : SLJIT_OR, TMP2, 0, numberofcmps == 0 ? SLJIT_UNUSED : TMP2, 0, SLJIT_C_LESS_EQUAL);
+ OP_FLAGS(numberofcmps == 0 ? SLJIT_MOV : SLJIT_OR, TMP2, 0, numberofcmps == 0 ? SLJIT_UNUSED : TMP2, 0, SLJIT_LESS_EQUAL);
numberofcmps++;
}
else if (numberofcmps > 0)
{
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
- OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
- jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+ OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
+ jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
numberofcmps = 0;
}
else
{
- jump = CMP(SLJIT_C_LESS_EQUAL ^ invertcmp, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
+ jump = CMP(SLJIT_LESS_EQUAL ^ invertcmp, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
numberofcmps = 0;
}
}
@@ -5027,59 +5042,59 @@
case PT_LAMP:
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_Lu - typeoffset);
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_Ll - typeoffset);
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_Lt - typeoffset);
- OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
- jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+ OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
+ jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
break;
case PT_GC:
c = PRIV(ucp_typerange)[(int)cc[1] * 2];
SET_TYPE_OFFSET(c);
- jump = CMP(SLJIT_C_LESS_EQUAL ^ invertcmp, typereg, 0, SLJIT_IMM, PRIV(ucp_typerange)[(int)cc[1] * 2 + 1] - c);
+ jump = CMP(SLJIT_LESS_EQUAL ^ invertcmp, typereg, 0, SLJIT_IMM, PRIV(ucp_typerange)[(int)cc[1] * 2 + 1] - c);
break;
case PT_PC:
- jump = CMP(SLJIT_C_EQUAL ^ invertcmp, typereg, 0, SLJIT_IMM, (int)cc[1] - typeoffset);
+ jump = CMP(SLJIT_EQUAL ^ invertcmp, typereg, 0, SLJIT_IMM, (int)cc[1] - typeoffset);
break;
case PT_SC:
- jump = CMP(SLJIT_C_EQUAL ^ invertcmp, scriptreg, 0, SLJIT_IMM, (int)cc[1]);
+ jump = CMP(SLJIT_EQUAL ^ invertcmp, scriptreg, 0, SLJIT_IMM, (int)cc[1]);
break;
case PT_SPACE:
case PT_PXSPACE:
SET_CHAR_OFFSET(9);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xd - 0x9);
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x85 - 0x9);
- OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x180e - 0x9);
- OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
SET_TYPE_OFFSET(ucp_Zl);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_Zs - ucp_Zl);
- OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
- jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+ OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
+ jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
break;
case PT_WORD:
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(CHAR_UNDERSCORE - charoffset));
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
/* Fall through. */
case PT_ALNUM:
SET_TYPE_OFFSET(ucp_Ll);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_Lu - ucp_Ll);
- OP_FLAGS((*cc == PT_ALNUM) ? SLJIT_MOV : SLJIT_OR, TMP2, 0, (*cc == PT_ALNUM) ? SLJIT_UNUSED : TMP2, 0, SLJIT_C_LESS_EQUAL);
+ OP_FLAGS((*cc == PT_ALNUM) ? SLJIT_MOV : SLJIT_OR, TMP2, 0, (*cc == PT_ALNUM) ? SLJIT_UNUSED : TMP2, 0, SLJIT_LESS_EQUAL);
SET_TYPE_OFFSET(ucp_Nd);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_No - ucp_Nd);
- OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
- jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+ OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
+ jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
break;
case PT_CLIST:
@@ -5101,7 +5116,7 @@
OP2(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_IMM, other_cases[1] ^ other_cases[0]);
}
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP2, 0, SLJIT_IMM, other_cases[1]);
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
other_cases += 2;
}
else if (is_powerof2(other_cases[2] ^ other_cases[1]))
@@ -5114,103 +5129,103 @@
OP2(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_IMM, other_cases[1] ^ other_cases[0]);
}
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP2, 0, SLJIT_IMM, other_cases[2]);
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(other_cases[0] - charoffset));
- OP_FLAGS(SLJIT_OR | ((other_cases[3] == NOTACHAR) ? SLJIT_SET_E : 0), TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR | ((other_cases[3] == NOTACHAR) ? SLJIT_SET_E : 0), TMP2, 0, TMP2, 0, SLJIT_EQUAL);
other_cases += 3;
}
else
{
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(*other_cases++ - charoffset));
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
}
while (*other_cases != NOTACHAR)
{
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(*other_cases++ - charoffset));
- OP_FLAGS(SLJIT_OR | ((*other_cases == NOTACHAR) ? SLJIT_SET_E : 0), TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR | ((*other_cases == NOTACHAR) ? SLJIT_SET_E : 0), TMP2, 0, TMP2, 0, SLJIT_EQUAL);
}
- jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+ jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
break;
case PT_UCNC:
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(CHAR_DOLLAR_SIGN - charoffset));
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(CHAR_COMMERCIAL_AT - charoffset));
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(CHAR_GRAVE_ACCENT - charoffset));
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
SET_CHAR_OFFSET(0xa0);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(0xd7ff - charoffset));
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
SET_CHAR_OFFSET(0);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xe000 - 0);
- OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_GREATER_EQUAL);
- jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+ OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_GREATER_EQUAL);
+ jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
break;
case PT_PXGRAPH:
/* C and Z groups are the farthest two groups. */
SET_TYPE_OFFSET(ucp_Ll);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_So - ucp_Ll);
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_GREATER);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_GREATER);
- jump = CMP(SLJIT_C_NOT_EQUAL, typereg, 0, SLJIT_IMM, ucp_Cf - ucp_Ll);
+ jump = CMP(SLJIT_NOT_EQUAL, typereg, 0, SLJIT_IMM, ucp_Cf - ucp_Ll);
/* In case of ucp_Cf, we overwrite the result. */
SET_CHAR_OFFSET(0x2066);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x2069 - 0x2066);
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x061c - 0x2066);
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x180e - 0x2066);
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
JUMPHERE(jump);
- jump = CMP(SLJIT_C_ZERO ^ invertcmp, TMP2, 0, SLJIT_IMM, 0);
+ jump = CMP(SLJIT_ZERO ^ invertcmp, TMP2, 0, SLJIT_IMM, 0);
break;
case PT_PXPRINT:
/* C and Z groups are the farthest two groups. */
SET_TYPE_OFFSET(ucp_Ll);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_So - ucp_Ll);
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_GREATER);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_GREATER);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_Zs - ucp_Ll);
- OP_FLAGS(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_C_NOT_EQUAL);
+ OP_FLAGS(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_NOT_EQUAL);
- jump = CMP(SLJIT_C_NOT_EQUAL, typereg, 0, SLJIT_IMM, ucp_Cf - ucp_Ll);
+ jump = CMP(SLJIT_NOT_EQUAL, typereg, 0, SLJIT_IMM, ucp_Cf - ucp_Ll);
/* In case of ucp_Cf, we overwrite the result. */
SET_CHAR_OFFSET(0x2066);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x2069 - 0x2066);
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x061c - 0x2066);
- OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
JUMPHERE(jump);
- jump = CMP(SLJIT_C_ZERO ^ invertcmp, TMP2, 0, SLJIT_IMM, 0);
+ jump = CMP(SLJIT_ZERO ^ invertcmp, TMP2, 0, SLJIT_IMM, 0);
break;
case PT_PXPUNCT:
SET_TYPE_OFFSET(ucp_Sc);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_So - ucp_Sc);
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
SET_CHAR_OFFSET(0);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xff);
- OP_FLAGS(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
+ OP_FLAGS(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
SET_TYPE_OFFSET(ucp_Pc);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_Ps - ucp_Pc);
- OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
- jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+ OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
+ jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
break;
}
cc += 2;
@@ -5250,19 +5265,19 @@
case OP_SOD:
OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, begin));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, STR_PTR, 0, TMP1, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, TMP1, 0));
return cc;
case OP_SOM:
OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, str));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, STR_PTR, 0, TMP1, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, TMP1, 0));
return cc;
case OP_NOT_WORD_BOUNDARY:
case OP_WORD_BOUNDARY:
add_jump(compiler, &common->wordboundary, JUMP(SLJIT_FAST_CALL));
- add_jump(compiler, backtracks, JUMP(type == OP_NOT_WORD_BOUNDARY ? SLJIT_C_NOT_ZERO : SLJIT_C_ZERO));
+ add_jump(compiler, backtracks, JUMP(type == OP_NOT_WORD_BOUNDARY ? SLJIT_NOT_ZERO : SLJIT_ZERO));
return cc;
case OP_NOT_DIGIT:
@@ -5277,7 +5292,7 @@
read_char8_type(common, type == OP_NOT_DIGIT);
/* Flip the starting bit in the negative case. */
OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ctype_digit);
- add_jump(compiler, backtracks, JUMP(type == OP_DIGIT ? SLJIT_C_ZERO : SLJIT_C_NOT_ZERO));
+ add_jump(compiler, backtracks, JUMP(type == OP_DIGIT ? SLJIT_ZERO : SLJIT_NOT_ZERO));
return cc;
case OP_NOT_WHITESPACE:
@@ -5290,7 +5305,7 @@
#endif
read_char8_type(common, type == OP_NOT_WHITESPACE);
OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ctype_space);
- add_jump(compiler, backtracks, JUMP(type == OP_WHITESPACE ? SLJIT_C_ZERO : SLJIT_C_NOT_ZERO));
+ add_jump(compiler, backtracks, JUMP(type == OP_WHITESPACE ? SLJIT_ZERO : SLJIT_NOT_ZERO));
return cc;
case OP_NOT_WORDCHAR:
@@ -5303,7 +5318,7 @@
#endif
read_char8_type(common, type == OP_NOT_WORDCHAR);
OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ctype_word);
- add_jump(compiler, backtracks, JUMP(type == OP_WORDCHAR ? SLJIT_C_ZERO : SLJIT_C_NOT_ZERO));
+ add_jump(compiler, backtracks, JUMP(type == OP_WORDCHAR ? SLJIT_ZERO : SLJIT_NOT_ZERO));
return cc;
case OP_ANY:
@@ -5311,15 +5326,15 @@
read_char_range(common, common->nlmin, common->nlmax, TRUE);
if (common->nltype == NLTYPE_FIXED && common->newline > 255)
{
- jump[0] = CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff);
+ jump[0] = CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff);
end_list = NULL;
if (common->mode != JIT_PARTIAL_HARD_COMPILE)
- add_jump(compiler, &end_list, CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
+ add_jump(compiler, &end_list, CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
else
check_str_end(common, &end_list);
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, common->newline & 0xff));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, common->newline & 0xff));
set_jumps(end_list, LABEL());
JUMPHERE(jump[0]);
}
@@ -5336,14 +5351,14 @@
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
#if defined COMPILE_PCRE8 || defined COMPILE_PCRE16
#if defined COMPILE_PCRE8
- jump[0] = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
+ jump[0] = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
#elif defined COMPILE_PCRE16
- jump[0] = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xd800);
+ jump[0] = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xd800);
OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0xfc00);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xd800);
- OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+ OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
#endif
@@ -5377,15 +5392,15 @@
case OP_ANYNL:
detect_partial_match(common, backtracks);
read_char_range(common, common->bsr_nlmin, common->bsr_nlmax, FALSE);
- jump[0] = CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
+ jump[0] = CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
/* We don't need to handle soft partial matching case. */
end_list = NULL;
if (common->mode != JIT_PARTIAL_HARD_COMPILE)
- add_jump(compiler, &end_list, CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
+ add_jump(compiler, &end_list, CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
else
check_str_end(common, &end_list);
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
- jump[1] = CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL);
+ jump[1] = CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL);
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
jump[2] = JUMP(SLJIT_JUMP);
JUMPHERE(jump[0]);
@@ -5400,7 +5415,7 @@
detect_partial_match(common, backtracks);
read_char_range(common, 0x9, 0x3000, type == OP_NOT_HSPACE);
add_jump(compiler, &common->hspace, JUMP(SLJIT_FAST_CALL));
- add_jump(compiler, backtracks, JUMP(type == OP_NOT_HSPACE ? SLJIT_C_NOT_ZERO : SLJIT_C_ZERO));
+ add_jump(compiler, backtracks, JUMP(type == OP_NOT_HSPACE ? SLJIT_NOT_ZERO : SLJIT_ZERO));
return cc;
case OP_NOT_VSPACE:
@@ -5408,7 +5423,7 @@
detect_partial_match(common, backtracks);
read_char_range(common, 0xa, 0x2029, type == OP_NOT_VSPACE);
add_jump(compiler, &common->vspace, JUMP(SLJIT_FAST_CALL));
- add_jump(compiler, backtracks, JUMP(type == OP_NOT_VSPACE ? SLJIT_C_NOT_ZERO : SLJIT_C_ZERO));
+ add_jump(compiler, backtracks, JUMP(type == OP_NOT_VSPACE ? SLJIT_NOT_ZERO : SLJIT_ZERO));
return cc;
#ifdef SUPPORT_UCP
@@ -5422,7 +5437,7 @@
OP1(SLJIT_MOV_UB, STACK_TOP, 0, SLJIT_MEM2(TMP1, TMP2), 3);
label = LABEL();
- jump[0] = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+ jump[0] = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
OP1(SLJIT_MOV, TMP3, 0, STR_PTR, 0);
read_char(common);
add_jump(compiler, &common->getucd, JUMP(SLJIT_FAST_CALL));
@@ -5434,7 +5449,7 @@
OP1(SLJIT_MOV, STACK_TOP, 0, TMP2, 0);
OP2(SLJIT_SHL, TMP2, 0, SLJIT_IMM, 1, TMP2, 0);
OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
- JUMPTO(SLJIT_C_NOT_ZERO, label);
+ JUMPTO(SLJIT_NOT_ZERO, label);
OP1(SLJIT_MOV, STR_PTR, 0, TMP3, 0);
JUMPHERE(jump[0]);
@@ -5442,7 +5457,7 @@
if (common->mode == JIT_PARTIAL_HARD_COMPILE)
{
- jump[0] = CMP(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0);
+ jump[0] = CMP(SLJIT_LESS, STR_PTR, 0, STR_END, 0);
/* Since we successfully read a char above, partial matching must occure. */
check_partial(common, TRUE);
JUMPHERE(jump[0]);
@@ -5452,63 +5467,63 @@
case OP_EODN:
/* Requires rather complex checks. */
- jump[0] = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+ jump[0] = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
if (common->nltype == NLTYPE_FIXED && common->newline > 255)
{
OP2(SLJIT_ADD, TMP2, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(2));
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
if (common->mode == JIT_COMPILE)
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, STR_END, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, STR_END, 0));
else
{
- jump[1] = CMP(SLJIT_C_EQUAL, TMP2, 0, STR_END, 0);
+ jump[1] = CMP(SLJIT_EQUAL, TMP2, 0, STR_END, 0);
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP2, 0, STR_END, 0);
- OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS);
+ OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff);
- OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_NOT_EQUAL);
- add_jump(compiler, backtracks, JUMP(SLJIT_C_NOT_EQUAL));
+ OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_NOT_EQUAL);
+ add_jump(compiler, backtracks, JUMP(SLJIT_NOT_EQUAL));
check_partial(common, TRUE);
add_jump(compiler, backtracks, JUMP(SLJIT_JUMP));
JUMPHERE(jump[1]);
}
OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff));
}
else if (common->nltype == NLTYPE_FIXED)
{
OP2(SLJIT_ADD, TMP2, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, STR_END, 0));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, common->newline));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, STR_END, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, common->newline));
}
else
{
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
- jump[1] = CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
+ jump[1] = CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
OP2(SLJIT_ADD, TMP2, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(2));
OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP2, 0, STR_END, 0);
- jump[2] = JUMP(SLJIT_C_GREATER);
- add_jump(compiler, backtracks, JUMP(SLJIT_C_LESS));
+ jump[2] = JUMP(SLJIT_GREATER);
+ add_jump(compiler, backtracks, JUMP(SLJIT_LESS));
/* Equal. */
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
- jump[3] = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL);
+ jump[3] = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL);
add_jump(compiler, backtracks, JUMP(SLJIT_JUMP));
JUMPHERE(jump[1]);
if (common->nltype == NLTYPE_ANYCRLF)
{
OP2(SLJIT_ADD, TMP2, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
- add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP2, 0, STR_END, 0));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL));
+ add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP2, 0, STR_END, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL));
}
else
{
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS1, STR_PTR, 0);
read_char_range(common, common->nlmin, common->nlmax, TRUE);
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, STR_PTR, 0, STR_END, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, STR_END, 0));
add_jump(compiler, &common->anynewline, JUMP(SLJIT_FAST_CALL));
- add_jump(compiler, backtracks, JUMP(SLJIT_C_ZERO));
+ add_jump(compiler, backtracks, JUMP(SLJIT_ZERO));
OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), LOCALS1);
}
JUMPHERE(jump[2]);
@@ -5519,36 +5534,36 @@
return cc;
case OP_EOD:
- add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_LESS, STR_PTR, 0, STR_END, 0));
check_partial(common, FALSE);
return cc;
case OP_CIRC:
OP1(SLJIT_MOV, TMP2, 0, ARGUMENTS, 0);
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(jit_arguments, begin));
- add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER, STR_PTR, 0, TMP1, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_GREATER, STR_PTR, 0, TMP1, 0));
OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(jit_arguments, notbol));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
return cc;
case OP_CIRCM:
OP1(SLJIT_MOV, TMP2, 0, ARGUMENTS, 0);
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(jit_arguments, begin));
- jump[1] = CMP(SLJIT_C_GREATER, STR_PTR, 0, TMP1, 0);
+ jump[1] = CMP(SLJIT_GREATER, STR_PTR, 0, TMP1, 0);
OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(jit_arguments, notbol));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
jump[0] = JUMP(SLJIT_JUMP);
JUMPHERE(jump[1]);
- add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
if (common->nltype == NLTYPE_FIXED && common->newline > 255)
{
OP2(SLJIT_SUB, TMP2, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(2));
- add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP2, 0, TMP1, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP2, 0, TMP1, 0));
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(-2));
OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(-1));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff));
}
else
{
@@ -5562,22 +5577,22 @@
case OP_DOLL:
OP1(SLJIT_MOV, TMP2, 0, ARGUMENTS, 0);
OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(jit_arguments, noteol));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
if (!common->endonly)
compile_char1_matchingpath(common, OP_EODN, cc, backtracks);
else
{
- add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_LESS, STR_PTR, 0, STR_END, 0));
check_partial(common, FALSE);
}
return cc;
case OP_DOLLM:
- jump[1] = CMP(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0);
+ jump[1] = CMP(SLJIT_LESS, STR_PTR, 0, STR_END, 0);
OP1(SLJIT_MOV, TMP2, 0, ARGUMENTS, 0);
OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(jit_arguments, noteol));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
check_partial(common, FALSE);
jump[0] = JUMP(SLJIT_JUMP);
JUMPHERE(jump[1]);
@@ -5587,20 +5602,20 @@
OP2(SLJIT_ADD, TMP2, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(2));
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
if (common->mode == JIT_COMPILE)
- add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER, TMP2, 0, STR_END, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_GREATER, TMP2, 0, STR_END, 0));
else
{
- jump[1] = CMP(SLJIT_C_LESS_EQUAL, TMP2, 0, STR_END, 0);
+ jump[1] = CMP(SLJIT_LESS_EQUAL, TMP2, 0, STR_END, 0);
/* STR_PTR = STR_END - IN_UCHARS(1) */
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
check_partial(common, TRUE);
add_jump(compiler, backtracks, JUMP(SLJIT_JUMP));
JUMPHERE(jump[1]);
}
OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff));
}
else
{
@@ -5619,7 +5634,7 @@
if (common->mode == JIT_COMPILE && (type == OP_CHAR || !char_has_othercase(common, cc) || char_get_othercase_bit(common, cc) != 0))
{
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(length));
- add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER, STR_PTR, 0, STR_END, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_GREATER, STR_PTR, 0, STR_END, 0));
context.length = IN_UCHARS(length);
context.sourcereg = -1;
@@ -5642,7 +5657,7 @@
if (type == OP_CHAR || !char_has_othercase(common, cc))
{
read_char_range(common, c, c, FALSE);
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, c));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, c));
return cc + length;
}
oc = char_othercase(common, c);
@@ -5651,11 +5666,11 @@
if (is_powerof2(bit))
{
OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, bit);
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, c | bit));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, c | bit));
return cc + length;
}
- jump[0] = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, c);
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, oc));
+ jump[0] = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, c);
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, oc));
JUMPHERE(jump[0]);
return cc + length;
@@ -5672,16 +5687,16 @@
{
OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
if (type == OP_NOT || !char_has_othercase(common, cc))
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, c));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, c));
else
{
/* Since UTF8 code page is fixed, we know that c is in [a-z] or [A-Z] range. */
OP2(SLJIT_OR, TMP2, 0, TMP1, 0, SLJIT_IMM, 0x20);
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, c | 0x20));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, c | 0x20));
}
/* Skip the variable-length character. */
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
- jump[0] = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
+ jump[0] = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
JUMPHERE(jump[0]);
@@ -5700,7 +5715,7 @@
if (type == OP_NOT || !char_has_othercase(common, cc))
{
read_char_range(common, c, c, TRUE);
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, c));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, c));
}
else
{
@@ -5710,12 +5725,12 @@
if (is_powerof2(bit))
{
OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, bit);
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, c | bit));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, c | bit));
}
else
{
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, c));
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, oc));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, c));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, oc));
}
}
return cc + length;
@@ -5738,7 +5753,7 @@
jump[0] = NULL;
if (common->utf)
{
- jump[0] = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, bit);
+ jump[0] = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, bit);
if (type == OP_CLASS)
{
add_jump(compiler, backtracks, jump[0]);
@@ -5746,7 +5761,7 @@
}
}
#elif !defined COMPILE_PCRE8
- jump[0] = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+ jump[0] = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
if (type == OP_CLASS)
{
add_jump(compiler, backtracks, jump[0]);
@@ -5759,7 +5774,7 @@
OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)cc);
OP2(SLJIT_SHL, TMP2, 0, SLJIT_IMM, 1, TMP2, 0);
OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
- add_jump(compiler, backtracks, JUMP(SLJIT_C_ZERO));
+ add_jump(compiler, backtracks, JUMP(SLJIT_ZERO));
#if defined SUPPORT_UTF || !defined COMPILE_PCRE8
if (jump[0] != NULL)
@@ -5785,17 +5800,17 @@
OP1(SLJIT_MOV, TMP3, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, begin));
OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, length);
label = LABEL();
- add_jump(compiler, backtracks, CMP(SLJIT_C_LESS_EQUAL, STR_PTR, 0, TMP3, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_LESS_EQUAL, STR_PTR, 0, TMP3, 0));
skip_char_back(common);
OP2(SLJIT_SUB | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_IMM, 1);
- JUMPTO(SLJIT_C_NOT_ZERO, label);
+ JUMPTO(SLJIT_NOT_ZERO, label);
}
else
#endif
{
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, begin));
OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(length));
- add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, STR_PTR, 0, TMP1, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_LESS, STR_PTR, 0, TMP1, 0));
}
check_start_used_ptr(common);
return cc + LINK_SIZE;
@@ -5856,7 +5871,7 @@
{
/* We have a fixed-length byte sequence. */
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, context.length);
- add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER, STR_PTR, 0, STR_END, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_GREATER, STR_PTR, 0, STR_END, 0));
context.sourcereg = -1;
#if defined SLJIT_UNALIGNED && SLJIT_UNALIGNED
@@ -5920,14 +5935,14 @@
{
offset = GET2(slot, 0) << 1;
GET_LOCAL_BASE(TMP2, 0, OVECTOR(offset));
- add_jump(compiler, &found, CMP(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset), TMP1, 0));
+ add_jump(compiler, &found, CMP(SLJIT_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset), TMP1, 0));
slot += common->name_entry_size;
}
offset = GET2(slot, 0) << 1;
GET_LOCAL_BASE(TMP2, 0, OVECTOR(offset));
if (backtracks != NULL && !common->jscript_compat)
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset), TMP1, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset), TMP1, 0));
set_jumps(found, LABEL());
}
@@ -5947,7 +5962,7 @@
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset));
/* OVECTOR(1) contains the "string begin - 1" constant. */
if (withchecks && !common->jscript_compat)
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
}
else
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP2), 0);
@@ -5962,7 +5977,7 @@
OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
if (withchecks)
- jump = CMP(SLJIT_C_EQUAL, TMP1, 0, TMP2, 0);
+ jump = CMP(SLJIT_EQUAL, TMP1, 0, TMP2, 0);
/* Needed to save important temporary registers. */
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS0, STACK_TOP, 0);
@@ -5971,11 +5986,11 @@
sljit_emit_ijump(compiler, SLJIT_CALL3, SLJIT_IMM, SLJIT_FUNC_OFFSET(do_utf_caselesscmp));
OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(SLJIT_SP), LOCALS0);
if (common->mode == JIT_COMPILE)
- add_jump(compiler, backtracks, CMP(SLJIT_C_LESS_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 1));
+ add_jump(compiler, backtracks, CMP(SLJIT_LESS_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 1));
else
{
- add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 0));
- nopartial = CMP(SLJIT_C_NOT_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 1);
+ add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 0));
+ nopartial = CMP(SLJIT_NOT_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 1);
check_partial(common, FALSE);
add_jump(compiler, backtracks, JUMP(SLJIT_JUMP));
JUMPHERE(nopartial);
@@ -5991,15 +6006,15 @@
OP2(SLJIT_SUB | SLJIT_SET_E, TMP2, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw), TMP1, 0);
if (withchecks)
- jump = JUMP(SLJIT_C_ZERO);
+ jump = JUMP(SLJIT_ZERO);
OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
- partial = CMP(SLJIT_C_GREATER, STR_PTR, 0, STR_END, 0);
+ partial = CMP(SLJIT_GREATER, STR_PTR, 0, STR_END, 0);
if (common->mode == JIT_COMPILE)
add_jump(compiler, backtracks, partial);
add_jump(compiler, *cc == OP_REF ? &common->casefulcmp : &common->caselesscmp, JUMP(SLJIT_FAST_CALL));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
if (common->mode != JIT_COMPILE)
{
@@ -6008,10 +6023,10 @@
/* TMP2 -= STR_END - STR_PTR */
OP2(SLJIT_SUB, TMP2, 0, TMP2, 0, STR_PTR, 0);
OP2(SLJIT_ADD, TMP2, 0, TMP2, 0, STR_END, 0);
- partial = CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, 0);
+ partial = CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, 0);
OP1(SLJIT_MOV, STR_PTR, 0, STR_END, 0);
add_jump(compiler, *cc == OP_REF ? &common->casefulcmp : &common->caselesscmp, JUMP(SLJIT_FAST_CALL));
- add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+ add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
JUMPHERE(partial);
check_partial(common, FALSE);
add_jump(compiler, backtracks, JUMP(SLJIT_JUMP));
@@ -6097,13 +6112,13 @@
/* Handles both invalid and empty cases. Since the minimum repeat,
is zero the invalid case is basically the same as an empty case. */
if (ref)
- zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
+ zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
else
{
compile_dnref_search(common, ccbegin, NULL);
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP2), 0);
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), POSSESSIVE1, TMP2, 0);
- zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
+ zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
}
/* Restore if not zero length. */
OP2(SLJIT_ADD, STACK_TOP, 0, STACK_TOP, 0, SLJIT_IMM, sizeof(sljit_sw));
@@ -6116,15 +6131,15 @@
OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(0), SLJIT_IMM, 0);
if (ref)
{
- add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
- zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
+ add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
+ zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
}
else
{
compile_dnref_search(common, ccbegin, &backtrack->topbacktracks);
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP2), 0);
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), POSSESSIVE1, TMP2, 0);
- zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
+ zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
}
}
@@ -6142,10 +6157,10 @@
OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), POSSESSIVE0, TMP1, 0);
if (min > 1)
- CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, min, label);
+ CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, min, label);
if (max > 1)
{
- jump = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, max);
+ jump = CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, max);
allocate_stack(common, 1);
OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(0), STR_PTR, 0);
JUMPTO(SLJIT_JUMP, label);
@@ -6180,13 +6195,13 @@
/* Handles both invalid and empty cases. Since the minimum repeat,
is zero the invalid case is basically the same as an empty case. */
if (ref)
- zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
+ zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
else
{
compile_dnref_search(common, ccbegin, NULL);
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP2), 0);
OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(2), TMP2, 0);
- zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
+ zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
}
/* Length is non-zero, we can match real repeats. */
OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(0), STR_PTR, 0);
@@ -6196,21 +6211,21 @@
{
if (ref)
{
- add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
- zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
+ add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
+ zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
}
else
{
compile_dnref_search(common, ccbegin, &backtrack->topbacktracks);
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP2), 0);
OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(2), TMP2, 0);
- zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
+ zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
}
}
BACKTRACK_AS(iterator_backtrack)->matchingpath = LABEL();
if (max > 0)
- add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_GREATER_EQUAL, SLJIT_MEM1(STACK_TOP), STACK(1), SLJIT_IMM, max));
+ add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_GREATER_EQUAL, SLJIT_MEM1(STACK_TOP), STACK(1), SLJIT_IMM, max));
if (!ref)
OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(STACK_TOP), STACK(2));
@@ -6222,7 +6237,7 @@
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(STACK_TOP), STACK(1));
OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(1), TMP1, 0);
- CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, min, BACKTRACK_AS(iterator_backtrack)->matchingpath);
+ CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, min, BACKTRACK_AS(iterator_backtrack)->matchingpath);
}
else if (max > 0)
OP2(SLJIT_ADD, SLJIT_MEM1(STACK_TOP), STACK(1), SLJIT_MEM1(STACK_TOP), STACK(1), SLJIT_IMM, 1);
@@ -6300,11 +6315,11 @@
else
JUMPTO(SLJIT_FAST_CALL, entry->entry);
/* Leave if the match is failed. */
-add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, 0));
+add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, 0));
return cc + 1 + LINK_SIZE;
}
-static int SLJIT_CALL do_callout(struct jit_arguments* arguments, PUBL(callout_block) *callout_block, pcre_uchar **jit_ovector)
+static int SLJIT_CALL do_callout(struct jit_arguments *arguments, PUBL(callout_block) *callout_block, pcre_uchar **jit_ovector)
{
const pcre_uchar *begin = arguments->begin;
int *offset_vector = arguments->offsets;
@@ -6364,9 +6379,9 @@
allocate_stack(common, CALLOUT_ARG_SIZE / sizeof(sljit_sw));
+SLJIT_ASSERT(common->capture_last_ptr != 0);
OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(SLJIT_SP), common->capture_last_ptr);
OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
-SLJIT_ASSERT(common->capture_last_ptr != 0);
OP1(SLJIT_MOV_SI, SLJIT_MEM1(STACK_TOP), CALLOUT_ARG_OFFSET(callout_number), SLJIT_IMM, cc[1]);
OP1(SLJIT_MOV_SI, SLJIT_MEM1(STACK_TOP), CALLOUT_ARG_OFFSET(capture_last), TMP2, 0);
@@ -6392,11 +6407,11 @@
/* Check return value. */
OP2(SLJIT_SUB | SLJIT_SET_S, SLJIT_UNUSED, 0, SLJIT_RETURN_REG, 0, SLJIT_IMM, 0);
-add_jump(compiler, &backtrack->topbacktracks, JUMP(SLJIT_C_SIG_GREATER));
+add_jump(compiler, &backtrack->topbacktracks, JUMP(SLJIT_SIG_GREATER));
if (common->forced_quit_label == NULL)
- add_jump(compiler, &common->forced_quit, JUMP(SLJIT_C_SIG_LESS));
+ add_jump(compiler, &common->forced_quit, JUMP(SLJIT_SIG_LESS));
else
- JUMPTO(SLJIT_C_SIG_LESS, common->forced_quit_label);
+ JUMPTO(SLJIT_SIG_LESS, common->forced_quit_label);
return cc + 2 + 2 * LINK_SIZE;
}
@@ -6454,7 +6469,7 @@
/* This is a braminzero backtrack path. */
OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(0));
free_stack(common, 1);
- brajump = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
+ brajump = CMP(SLJIT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
}
if (framesize < 0)
@@ -6989,7 +7004,7 @@
has_alternatives = *cc == OP_ALT;
if (SLJIT_UNLIKELY(opcode == OP_COND || opcode == OP_SCOND))
- has_alternatives = (*matchingpath == OP_RREF || *matchingpath == OP_DNRREF) ? FALSE : TRUE;
+ has_alternatives = (*matchingpath == OP_RREF || *matchingpath == OP_DNRREF || *matchingpath == OP_FAIL) ? FALSE : TRUE;
if (SLJIT_UNLIKELY(opcode == OP_COND) && (*cc == OP_KETRMAX || *cc == OP_KETRMIN))
opcode = OP_SCOND;
@@ -7050,13 +7065,13 @@
if (ket != OP_KETRMIN)
{
free_stack(common, 1);
- braminzero = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
+ braminzero = CMP(SLJIT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
}
else
{
if (opcode == OP_ONCE || opcode >= OP_SBRA)
{
- jump = CMP(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
+ jump = CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(1));
/* Nothing stored during the first run. */
skip = JUMP(SLJIT_JUMP);
@@ -7065,19 +7080,19 @@
if (opcode != OP_ONCE || BACKTRACK_AS(bracket_backtrack)->u.framesize < 0)
{
/* When we come from outside, private_data_ptr contains the previous STR_PTR. */
- braminzero = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), private_data_ptr);
+ braminzero = CMP(SLJIT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), private_data_ptr);
}
else
{
/* Except when the whole stack frame must be saved. */
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), private_data_ptr);
- braminzero = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_MEM1(TMP1), (BACKTRACK_AS(bracket_backtrack)->u.framesize + 1) * sizeof(sljit_sw));
+ braminzero = CMP(SLJIT_EQUAL, STR_PTR, 0, SLJIT_MEM1(TMP1), (BACKTRACK_AS(bracket_backtrack)->u.framesize + 1) * sizeof(sljit_sw));
}
JUMPHERE(skip);
}
else
{
- jump = CMP(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
+ jump = CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(1));
JUMPHERE(jump);
}
@@ -7223,7 +7238,7 @@
{
SLJIT_ASSERT(has_alternatives);
add_jump(compiler, &(BACKTRACK_AS(bracket_backtrack)->u.condfailed),
- CMP(SLJIT_C_EQUAL, SLJIT_MEM1(SLJIT_SP), OVECTOR(GET2(matchingpath, 1) << 1), SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
+ CMP(SLJIT_EQUAL, SLJIT_MEM1(SLJIT_SP), OVECTOR(GET2(matchingpath, 1) << 1), SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
matchingpath += 1 + IMM2_SIZE;
}
else if (*matchingpath == OP_DNCREF)
@@ -7244,15 +7259,17 @@
slot += common->name_entry_size;
}
OP1(SLJIT_MOV, STR_PTR, 0, TMP3, 0);
- add_jump(compiler, &(BACKTRACK_AS(bracket_backtrack)->u.condfailed), JUMP(SLJIT_C_ZERO));
+ add_jump(compiler, &(BACKTRACK_AS(bracket_backtrack)->u.condfailed), JUMP(SLJIT_ZERO));
matchingpath += 1 + 2 * IMM2_SIZE;
}
- else if (*matchingpath == OP_RREF || *matchingpath == OP_DNRREF)
+ else if (*matchingpath == OP_RREF || *matchingpath == OP_DNRREF || *matchingpath == OP_FAIL)
{
/* Never has other case. */
BACKTRACK_AS(bracket_backtrack)->u.condfailed = NULL;
SLJIT_ASSERT(!has_alternatives);
+ if (*matchingpath == OP_FAIL)
+ stacksize = 0;
if (*matchingpath == OP_RREF)
{
stacksize = GET2(matchingpath, 1);
@@ -7387,7 +7404,7 @@
if (has_alternatives)
BACKTRACK_AS(bracket_backtrack)->alternative_matchingpath = LABEL();
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_MEM1(SLJIT_SP), repeat_ptr, SLJIT_MEM1(SLJIT_SP), repeat_ptr, SLJIT_IMM, 1);
- JUMPTO(SLJIT_C_NOT_ZERO, rmax_label);
+ JUMPTO(SLJIT_NOT_ZERO, rmax_label);
/* Drop STR_PTR for greedy plus quantifier. */
if (opcode != OP_ONCE)
free_stack(common, 1);
@@ -7399,14 +7416,14 @@
/* Checking zero-length iteration. */
if (opcode != OP_ONCE)
{
- CMPTO(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), private_data_ptr, STR_PTR, 0, rmax_label);
+ CMPTO(SLJIT_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), private_data_ptr, STR_PTR, 0, rmax_label);
/* Drop STR_PTR for greedy plus quantifier. */
if (bra != OP_BRAZERO)
free_stack(common, 1);
}
else
/* TMP2 must contain the starting STR_PTR. */
- CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, STR_PTR, 0, rmax_label);
+ CMPTO(SLJIT_NOT_EQUAL, TMP2, 0, STR_PTR, 0, rmax_label);
}
else
JUMPTO(SLJIT_JUMP, rmax_label);
@@ -7417,7 +7434,7 @@
{
count_match(common);
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_MEM1(SLJIT_SP), repeat_ptr, SLJIT_MEM1(SLJIT_SP), repeat_ptr, SLJIT_IMM, 1);
- JUMPTO(SLJIT_C_NOT_ZERO, rmax_label);
+ JUMPTO(SLJIT_NOT_ZERO, rmax_label);
}
else if (repeat_type == OP_UPTO)
{
@@ -7649,7 +7666,7 @@
}
if (opcode == OP_SBRAPOS || opcode == OP_SCBRAPOS)
- add_jump(compiler, &emptymatch, CMP(SLJIT_C_EQUAL, TMP1, 0, STR_PTR, 0));
+ add_jump(compiler, &emptymatch, CMP(SLJIT_EQUAL, TMP1, 0, STR_PTR, 0));
if (!zero)
OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(stacksize - 1), SLJIT_IMM, 0);
@@ -7676,7 +7693,7 @@
}
if (opcode == OP_SBRAPOS || opcode == OP_SCBRAPOS)
- add_jump(compiler, &emptymatch, CMP(SLJIT_C_EQUAL, TMP1, 0, STR_PTR, 0));
+ add_jump(compiler, &emptymatch, CMP(SLJIT_EQUAL, TMP1, 0, STR_PTR, 0));
if (!zero)
{
@@ -7732,9 +7749,9 @@
if (!zero)
{
if (framesize < 0)
- add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(STACK_TOP), STACK(stacksize - 1), SLJIT_IMM, 0));
+ add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_NOT_EQUAL, SLJIT_MEM1(STACK_TOP), STACK(stacksize - 1), SLJIT_IMM, 0));
else /* TMP2 is set to [private_data_ptr] above. */
- add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(TMP2), (stacksize - 1) * sizeof(sljit_sw), SLJIT_IMM, 0));
+ add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_NOT_EQUAL, SLJIT_MEM1(TMP2), (stacksize - 1) * sizeof(sljit_sw), SLJIT_IMM, 0));
}
/* None of them matched. */
@@ -7848,7 +7865,7 @@
pcre_uchar opcode;
pcre_uchar type;
int max = -1, min = -1;
-pcre_uchar* end;
+pcre_uchar *end;
jump_list *nomatch = NULL;
struct sljit_jump *jump = NULL;
struct sljit_label *label;
@@ -7932,9 +7949,9 @@
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), POSSESSIVE0);
OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
if (opcode == OP_CRRANGE && min > 0)
- CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, min, label);
+ CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, min, label);
if (opcode == OP_UPTO || (opcode == OP_CRRANGE && max > 0))
- jump = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, max);
+ jump = CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, max);
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), POSSESSIVE0, TMP1, 0);
}
@@ -7971,11 +7988,11 @@
OP1(SLJIT_MOV, TMP1, 0, base, offset1);
OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
OP1(SLJIT_MOV, base, offset1, TMP1, 0);
- CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, max + 1, label);
+ CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, max + 1, label);
}
set_jumps(nomatch, LABEL());
if (opcode == OP_CRRANGE)
- add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_LESS, base, offset1, SLJIT_IMM, min + 1));
+ add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_LESS, base, offset1, SLJIT_IMM, min + 1));
OP1(SLJIT_MOV, STR_PTR, 0, base, offset0);
}
BACKTRACK_AS(iterator_backtrack)->matchingpath = LABEL();
@@ -8017,7 +8034,7 @@
label = LABEL();
compile_char1_matchingpath(common, type, cc, &backtrack->topbacktracks);
OP2(SLJIT_SUB | SLJIT_SET_E, tmp_base, tmp_offset, tmp_base, tmp_offset, SLJIT_IMM, 1);
- JUMPTO(SLJIT_C_NOT_ZERO, label);
+ JUMPTO(SLJIT_NOT_ZERO, label);
break;
case OP_POSSTAR:
@@ -8036,7 +8053,7 @@
else
{
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_MEM1(SLJIT_SP), POSSESSIVE1, SLJIT_MEM1(SLJIT_SP), POSSESSIVE1, SLJIT_IMM, 1);
- JUMPTO(SLJIT_C_NOT_ZERO, label);
+ JUMPTO(SLJIT_NOT_ZERO, label);
}
set_jumps(nomatch, LABEL());
OP1(SLJIT_MOV, STR_PTR, 0, tmp_base, tmp_offset);
@@ -8056,7 +8073,7 @@
label = LABEL();
compile_char1_matchingpath(common, type, cc, &backtrack->topbacktracks);
OP2(SLJIT_SUB | SLJIT_SET_E, tmp_base, tmp_offset, tmp_base, tmp_offset, SLJIT_IMM, 1);
- JUMPTO(SLJIT_C_NOT_ZERO, label);
+ JUMPTO(SLJIT_NOT_ZERO, label);
if (max != 0)
{
@@ -8072,7 +8089,7 @@
else
{
OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_MEM1(SLJIT_SP), POSSESSIVE1, SLJIT_MEM1(SLJIT_SP), POSSESSIVE1, SLJIT_IMM, 1);
- JUMPTO(SLJIT_C_NOT_ZERO, label);
+ JUMPTO(SLJIT_NOT_ZERO, label);
}
set_jumps(nomatch, LABEL());
OP1(SLJIT_MOV, STR_PTR, 0, tmp_base, tmp_offset);
@@ -8111,22 +8128,22 @@
}
if (common->accept_label == NULL)
- add_jump(compiler, &common->accept, CMP(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(0)));
+ add_jump(compiler, &common->accept, CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(0)));
else
- CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(0), common->accept_label);
+ CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(0), common->accept_label);
OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, notempty));
-add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, notempty_atstart));
if (common->accept_label == NULL)
- add_jump(compiler, &common->accept, CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+ add_jump(compiler, &common->accept, CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
else
- CMPTO(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, 0, common->accept_label);
+ CMPTO(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, 0, common->accept_label);
OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, str));
if (common->accept_label == NULL)
- add_jump(compiler, &common->accept, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, STR_PTR, 0));
+ add_jump(compiler, &common->accept, CMP(SLJIT_NOT_EQUAL, TMP2, 0, STR_PTR, 0));
else
- CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, STR_PTR, 0, common->accept_label);
+ CMPTO(SLJIT_NOT_EQUAL, TMP2, 0, STR_PTR, 0, common->accept_label);
add_jump(compiler, &backtrack->topbacktracks, JUMP(SLJIT_JUMP));
return cc + 1;
}
@@ -8566,7 +8583,7 @@
set_jumps(current->topbacktracks, LABEL());
OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(0));
free_stack(common, 1);
- CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
+ CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
}
else
{
@@ -8575,13 +8592,13 @@
if (opcode <= OP_PLUS)
{
OP1(SLJIT_MOV, STR_PTR, 0, base, offset0);
- jump = CMP(SLJIT_C_LESS_EQUAL, STR_PTR, 0, base, offset1);
+ jump = CMP(SLJIT_LESS_EQUAL, STR_PTR, 0, base, offset1);
}
else
{
OP1(SLJIT_MOV, TMP1, 0, base, offset1);
OP1(SLJIT_MOV, STR_PTR, 0, base, offset0);
- jump = CMP(SLJIT_C_LESS_EQUAL, TMP1, 0, SLJIT_IMM, min + 1);
+ jump = CMP(SLJIT_LESS_EQUAL, TMP1, 0, SLJIT_IMM, min + 1);
OP2(SLJIT_SUB, base, offset1, TMP1, 0, SLJIT_IMM, 1);
}
skip_char_back(common);
@@ -8626,12 +8643,12 @@
OP1(SLJIT_MOV, base, offset1, TMP1, 0);
if (opcode == OP_CRMINRANGE)
- CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, min + 1, label);
+ CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, min + 1, label);
if (opcode == OP_CRMINRANGE && max == 0)
JUMPTO(SLJIT_JUMP, CURRENT_AS(iterator_backtrack)->matchingpath);
else
- CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, max + 2, CURRENT_AS(iterator_backtrack)->matchingpath);
+ CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, max + 2, CURRENT_AS(iterator_backtrack)->matchingpath);
set_jumps(jumplist, LABEL());
if (private_data_ptr == 0)
@@ -8641,7 +8658,7 @@
case OP_QUERY:
OP1(SLJIT_MOV, STR_PTR, 0, base, offset0);
OP1(SLJIT_MOV, base, offset0, SLJIT_IMM, 0);
- CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
+ CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
jump = JUMP(SLJIT_JUMP);
set_jumps(current->topbacktracks, LABEL());
OP1(SLJIT_MOV, STR_PTR, 0, base, offset0);
@@ -8655,7 +8672,7 @@
case OP_MINQUERY:
OP1(SLJIT_MOV, STR_PTR, 0, base, offset0);
OP1(SLJIT_MOV, base, offset0, SLJIT_IMM, 0);
- jump = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
+ jump = CMP(SLJIT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
compile_char1_matchingpath(common, type, cc, &jumplist);
JUMPTO(SLJIT_JUMP, CURRENT_AS(iterator_backtrack)->matchingpath);
set_jumps(jumplist, LABEL());
@@ -8696,12 +8713,12 @@
set_jumps(current->topbacktracks, LABEL());
OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(0));
free_stack(common, 1);
- CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
+ CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
return;
}
OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(0));
-CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
+CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
set_jumps(current->topbacktracks, LABEL());
free_stack(common, ref ? 2 : 3);
}
@@ -8759,7 +8776,7 @@
if (bra == OP_BRAZERO)
{
OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(0), SLJIT_IMM, 0);
- CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(assert_backtrack)->matchingpath);
+ CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(assert_backtrack)->matchingpath);
free_stack(common, 1);
}
return;
@@ -8770,12 +8787,12 @@
if (*cc == OP_ASSERT_NOT || *cc == OP_ASSERTBACK_NOT)
{
OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(0), SLJIT_IMM, 0);
- CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(assert_backtrack)->matchingpath);
+ CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(assert_backtrack)->matchingpath);
free_stack(common, 1);
return;
}
free_stack(common, 1);
- brajump = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
+ brajump = CMP(SLJIT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
}
if (*cc == OP_ASSERT || *cc == OP_ASSERTBACK)
@@ -8881,7 +8898,7 @@
{
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(STACK_TOP), STACK(0));
free_stack(common, 1);
- brazero = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, 0);
+ brazero = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, 0);
}
}
else if (ket == OP_KETRMIN)
@@ -8892,7 +8909,7 @@
if (repeat_type != 0)
{
/* TMP1 was set a few lines above. */
- CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0, CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
+ CMPTO(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0, CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
/* Drop STR_PTR for non-greedy plus quantifier. */
if (opcode != OP_ONCE)
free_stack(common, 1);
@@ -8901,11 +8918,11 @@
{
/* Checking zero-length iteration. */
if (opcode != OP_ONCE || CURRENT_AS(bracket_backtrack)->u.framesize < 0)
- CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), private_data_ptr, CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
+ CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), private_data_ptr, CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
else
{
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), private_data_ptr);
- CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(TMP1), (CURRENT_AS(bracket_backtrack)->u.framesize + 1) * sizeof(sljit_sw), CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
+ CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(TMP1), (CURRENT_AS(bracket_backtrack)->u.framesize + 1) * sizeof(sljit_sw), CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
}
/* Drop STR_PTR for non-greedy plus quantifier. */
if (opcode != OP_ONCE)
@@ -8922,7 +8939,7 @@
{
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(STACK_TOP), STACK(0));
free_stack(common, 1);
- brazero = CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0);
+ brazero = CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0);
}
else if (repeat_type == OP_EXACT)
{
@@ -8971,7 +8988,7 @@
free_stack(common, 1);
alt_max = 2;
- alt1 = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, sizeof(sljit_uw));
+ alt1 = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, sizeof(sljit_uw));
}
}
else if (has_alternatives)
@@ -8982,16 +8999,17 @@
if (alt_max > 4)
{
/* Table jump if alt_max is greater than 4. */
- next_update_addr = common->read_only_data_ptr;
- common->read_only_data_ptr += alt_max;
+ next_update_addr = allocate_read_only_data(common, alt_max * sizeof(sljit_uw));
+ if (SLJIT_UNLIKELY(next_update_addr == NULL))
+ return;
sljit_emit_ijump(compiler, SLJIT_JUMP, SLJIT_MEM1(TMP1), (sljit_sw)next_update_addr);
add_label_addr(common, next_update_addr++);
}
else
{
if (alt_max == 4)
- alt2 = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, 2 * sizeof(sljit_uw));
- alt1 = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, sizeof(sljit_uw));
+ alt2 = CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, 2 * sizeof(sljit_uw));
+ alt1 = CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, sizeof(sljit_uw));
}
}
@@ -9124,13 +9142,13 @@
{
JUMPHERE(alt1);
if (alt_max == 3 && alt_count == sizeof(sljit_uw))
- alt2 = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, 2 * sizeof(sljit_uw));
+ alt2 = CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, 2 * sizeof(sljit_uw));
}
else
{
JUMPHERE(alt2);
if (alt_max == 4)
- alt1 = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, 3 * sizeof(sljit_uw));
+ alt1 = CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, 3 * sizeof(sljit_uw));
}
}
alt_count += sizeof(sljit_uw);
@@ -9218,7 +9236,7 @@
{
OP2(SLJIT_ADD, TMP1, 0, SLJIT_MEM1(SLJIT_SP), repeat_ptr, SLJIT_IMM, 1);
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), repeat_ptr, TMP1, 0);
- CMPTO(SLJIT_C_LESS_EQUAL, TMP1, 0, SLJIT_IMM, repeat_count, exact_label);
+ CMPTO(SLJIT_LESS_EQUAL, TMP1, 0, SLJIT_IMM, repeat_count, exact_label);
}
else if (ket == OP_KETRMAX)
{
@@ -9226,7 +9244,7 @@
if (bra != OP_BRAZERO)
free_stack(common, 1);
- CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
+ CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
if (bra == OP_BRAZERO)
{
OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(1));
@@ -9244,7 +9262,7 @@
affect badly the free_stack(2) above. */
if (opcode != OP_ONCE)
free_stack(common, 1);
- CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0, rmin_label);
+ CMPTO(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0, rmin_label);
if (opcode == OP_ONCE)
free_stack(common, bra == OP_BRAMINZERO ? 2 : 1);
else if (bra == OP_BRAMINZERO)
@@ -9342,8 +9360,8 @@
loop = LABEL();
OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(STACK_TOP), -(int)sizeof(sljit_sw));
JUMPHERE(jump);
- CMPTO(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(STACK_TOP), -(int)(2 * sizeof(sljit_sw)), TMP1, 0, loop);
- CMPTO(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(STACK_TOP), -(int)(3 * sizeof(sljit_sw)), TMP2, 0, loop);
+ CMPTO(SLJIT_NOT_EQUAL, SLJIT_MEM1(STACK_TOP), -(int)(2 * sizeof(sljit_sw)), TMP1, 0, loop);
+ CMPTO(SLJIT_NOT_EQUAL, SLJIT_MEM1(STACK_TOP), -(int)(3 * sizeof(sljit_sw)), TMP2, 0, loop);
add_jump(compiler, &common->then_trap->quit, JUMP(SLJIT_JUMP));
return;
}
@@ -9373,7 +9391,7 @@
OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(SLJIT_SP), LOCALS0);
OP1(SLJIT_MOV, STR_PTR, 0, TMP1, 0);
- add_jump(compiler, &common->reset_match, CMP(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, -1));
+ add_jump(compiler, &common->reset_match, CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, -1));
return;
}
@@ -9766,9 +9784,7 @@
rootbacktrack.cc = (pcre_uchar *)re + re->name_table_offset + re->name_count * re->name_entry_size;
common->start = rootbacktrack.cc;
-common->read_only_data = NULL;
-common->read_only_data_size = 0;
-common->read_only_data_ptr = NULL;
+common->read_only_data_head = NULL;
common->fcc = tables + fcc_offset;
common->lcc = (sljit_sw)(tables + lcc_offset);
common->mode = mode;
@@ -9849,7 +9865,7 @@
/* Calculate the local space size on the stack. */
common->ovector_start = LIMIT_MATCH + sizeof(sljit_sw);
-common->optimized_cbracket = (pcre_uint8 *)SLJIT_MALLOC(re->top_bracket + 1);
+common->optimized_cbracket = (pcre_uint8 *)SLJIT_MALLOC(re->top_bracket + 1, compiler->allocator_data);
if (!common->optimized_cbracket)
return;
#if defined DEBUG_FORCE_UNOPTIMIZED_CBRAS && DEBUG_FORCE_UNOPTIMIZED_CBRAS == 1
@@ -9865,7 +9881,7 @@
#endif
if (!check_opcode_types(common, common->start, ccend))
{
- SLJIT_FREE(common->optimized_cbracket);
+ SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
return;
}
@@ -9927,10 +9943,10 @@
common->cbra_ptr = OVECTOR_START + (re->top_bracket + 1) * 2 * sizeof(sljit_sw);
total_length = ccend - common->start;
-common->private_data_ptrs = (sljit_si *)SLJIT_MALLOC(total_length * (sizeof(sljit_si) + (common->has_then ? 1 : 0)));
+common->private_data_ptrs = (sljit_si *)SLJIT_MALLOC(total_length * (sizeof(sljit_si) + (common->has_then ? 1 : 0)), compiler->allocator_data);
if (!common->private_data_ptrs)
{
- SLJIT_FREE(common->optimized_cbracket);
+ SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
return;
}
memset(common->private_data_ptrs, 0, total_length * sizeof(sljit_si));
@@ -9939,8 +9955,8 @@
set_private_data_ptrs(common, &private_data_size, ccend);
if (private_data_size > SLJIT_MAX_LOCAL_SIZE)
{
- SLJIT_FREE(common->private_data_ptrs);
- SLJIT_FREE(common->optimized_cbracket);
+ SLJIT_FREE(common->private_data_ptrs, compiler->allocator_data);
+ SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
return;
}
@@ -9951,25 +9967,11 @@
set_then_offsets(common, common->start, NULL);
}
-if (common->read_only_data_size > 0)
- {
- common->read_only_data = (sljit_uw *)SLJIT_MALLOC(common->read_only_data_size);
- if (common->read_only_data == NULL)
- {
- SLJIT_FREE(common->optimized_cbracket);
- SLJIT_FREE(common->private_data_ptrs);
- return;
- }
- common->read_only_data_ptr = common->read_only_data;
- }
-
-compiler = sljit_create_compiler();
+compiler = sljit_create_compiler(NULL);
if (!compiler)
{
- SLJIT_FREE(common->optimized_cbracket);
- SLJIT_FREE(common->private_data_ptrs);
- if (common->read_only_data)
- SLJIT_FREE(common->read_only_data);
+ SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
+ SLJIT_FREE(common->private_data_ptrs, compiler->allocator_data);
return;
}
common->compiler = compiler;
@@ -10008,21 +10010,12 @@
if ((re->options & PCRE_NO_START_OPTIMIZE) == 0)
{
if (mode == JIT_COMPILE && fast_forward_first_n_chars(common, (re->options & PCRE_FIRSTLINE) != 0))
- {
- /* If read_only_data is reallocated, we might have an allocation failure. */
- if (common->read_only_data_size > 0 && common->read_only_data == NULL)
- {
- sljit_free_compiler(compiler);
- SLJIT_FREE(common->optimized_cbracket);
- SLJIT_FREE(common->private_data_ptrs);
- return;
- }
- }
+ ;
else if ((re->flags & PCRE_FIRSTSET) != 0)
fast_forward_first_char(common, (pcre_uchar)re->first_char, (re->flags & PCRE_FCH_CASELESS) != 0, (re->options & PCRE_FIRSTLINE) != 0);
else if ((re->flags & PCRE_STARTLINE) != 0)
fast_forward_newline(common, (re->options & PCRE_FIRSTLINE) != 0);
- else if ((re->flags & PCRE_STARTLINE) == 0 && study != NULL && (study->flags & PCRE_STUDY_MAPPED) != 0)
+ else if (study != NULL && (study->flags & PCRE_STUDY_MAPPED) != 0)
fast_forward_start_bits(common, study->start_bits, (re->options & PCRE_FIRSTLINE) != 0);
}
}
@@ -10033,7 +10026,7 @@
{
OP1(SLJIT_MOV, SLJIT_RETURN_REG, 0, SLJIT_IMM, PCRE_ERROR_NOMATCH);
OP2(SLJIT_ADD, TMP2, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(study->minlength));
- minlength_check_failed = CMP(SLJIT_C_GREATER, TMP2, 0, STR_END, 0);
+ minlength_check_failed = CMP(SLJIT_GREATER, TMP2, 0, STR_END, 0);
}
if (common->req_char_ptr != 0)
reqbyte_notfound = search_requested_char(common, (pcre_uchar)re->req_char, (re->flags & PCRE_RCH_CASELESS) != 0, (re->flags & PCRE_FIRSTSET) != 0);
@@ -10056,7 +10049,7 @@
/* Copy the beginning of the string. */
if (mode == JIT_PARTIAL_SOFT_COMPILE)
{
- jump = CMP(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, -1);
+ jump = CMP(SLJIT_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, -1);
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0);
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->hit_start + sizeof(sljit_sw), STR_PTR, 0);
JUMPHERE(jump);
@@ -10068,16 +10061,15 @@
if (SLJIT_UNLIKELY(sljit_get_compiler_error(compiler)))
{
sljit_free_compiler(compiler);
- SLJIT_FREE(common->optimized_cbracket);
- SLJIT_FREE(common->private_data_ptrs);
- if (common->read_only_data)
- SLJIT_FREE(common->read_only_data);
+ SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
+ SLJIT_FREE(common->private_data_ptrs, compiler->allocator_data);
+ free_read_only_data(common->read_only_data_head, compiler->allocator_data);
return;
}
if (common->might_be_empty)
{
- empty_match = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(0));
+ empty_match = CMP(SLJIT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(0));
empty_match_found_label = LABEL();
}
@@ -10109,10 +10101,9 @@
if (SLJIT_UNLIKELY(sljit_get_compiler_error(compiler)))
{
sljit_free_compiler(compiler);
- SLJIT_FREE(common->optimized_cbracket);
- SLJIT_FREE(common->private_data_ptrs);
- if (common->read_only_data)
- SLJIT_FREE(common->read_only_data);
+ SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
+ SLJIT_FREE(common->private_data_ptrs, compiler->allocator_data);
+ free_read_only_data(common->read_only_data_head, compiler->allocator_data);
return;
}
@@ -10122,7 +10113,7 @@
if (mode == JIT_PARTIAL_SOFT_COMPILE)
{
/* Update hit_start only in the first time. */
- jump = CMP(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, 0);
+ jump = CMP(SLJIT_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, 0);
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr);
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, SLJIT_IMM, -1);
OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->hit_start, TMP1, 0);
@@ -10143,15 +10134,15 @@
if (common->ff_newline_shortcut != NULL)
{
if ((re->options & PCRE_FIRSTLINE) == 0)
- CMPTO(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0, common->ff_newline_shortcut);
+ CMPTO(SLJIT_LESS, STR_PTR, 0, STR_END, 0, common->ff_newline_shortcut);
/* There cannot be more newlines here. */
}
else
{
if ((re->options & PCRE_FIRSTLINE) == 0)
- CMPTO(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0, mainloop_label);
+ CMPTO(SLJIT_LESS, STR_PTR, 0, STR_END, 0, mainloop_label);
else
- CMPTO(SLJIT_C_LESS, STR_PTR, 0, TMP1, 0, mainloop_label);
+ CMPTO(SLJIT_LESS, STR_PTR, 0, TMP1, 0, mainloop_label);
}
}
@@ -10160,7 +10151,7 @@
JUMPHERE(reqbyte_notfound);
if (mode == JIT_PARTIAL_SOFT_COMPILE)
- CMPTO(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, -1, common->partialmatchlabel);
+ CMPTO(SLJIT_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, -1, common->partialmatchlabel);
OP1(SLJIT_MOV, SLJIT_RETURN_REG, 0, SLJIT_IMM, PCRE_ERROR_NOMATCH);
JUMPTO(SLJIT_JUMP, common->quit_label);
@@ -10172,11 +10163,11 @@
JUMPHERE(empty_match);
OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, notempty));
- CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0, empty_match_backtrack_label);
+ CMPTO(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0, empty_match_backtrack_label);
OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, notempty_atstart));
- CMPTO(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, 0, empty_match_found_label);
+ CMPTO(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, 0, empty_match_found_label);
OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, str));
- CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, STR_PTR, 0, empty_match_found_label);
+ CMPTO(SLJIT_NOT_EQUAL, TMP2, 0, STR_PTR, 0, empty_match_found_label);
JUMPTO(SLJIT_JUMP, empty_match_backtrack_label);
}
@@ -10190,10 +10181,9 @@
if (SLJIT_UNLIKELY(sljit_get_compiler_error(compiler)))
{
sljit_free_compiler(compiler);
- SLJIT_FREE(common->optimized_cbracket);
- SLJIT_FREE(common->private_data_ptrs);
- if (common->read_only_data)
- SLJIT_FREE(common->read_only_data);
+ SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
+ SLJIT_FREE(common->private_data_ptrs, compiler->allocator_data);
+ free_read_only_data(common->read_only_data_head, compiler->allocator_data);
return;
}
flush_stubs(common);
@@ -10214,7 +10204,7 @@
OP2(SLJIT_ADD, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(struct sljit_stack, limit), SLJIT_IMM, STACK_GROWTH_RATE);
sljit_emit_ijump(compiler, SLJIT_CALL2, SLJIT_IMM, SLJIT_FUNC_OFFSET(sljit_stack_resize));
-jump = CMP(SLJIT_C_NOT_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 0);
+jump = CMP(SLJIT_NOT_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 0);
OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, stack));
OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(struct sljit_stack, top));
@@ -10272,7 +10262,7 @@
{
set_jumps(common->reset_match, LABEL());
do_reset_match(common, (re->top_bracket + 1) * 2);
- CMPTO(SLJIT_C_GREATER, STR_PTR, 0, TMP1, 0, continue_match_label);
+ CMPTO(SLJIT_GREATER, STR_PTR, 0, TMP1, 0, continue_match_label);
OP1(SLJIT_MOV, STR_PTR, 0, TMP1, 0);
JUMPTO(SLJIT_JUMP, reset_match_label);
}
@@ -10303,9 +10293,8 @@
}
#endif
-SLJIT_ASSERT(common->read_only_data + (common->read_only_data_size >> SLJIT_WORD_SHIFT) == common->read_only_data_ptr);
-SLJIT_FREE(common->optimized_cbracket);
-SLJIT_FREE(common->private_data_ptrs);
+SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
+SLJIT_FREE(common->private_data_ptrs, compiler->allocator_data);
executable_func = sljit_generate_code(compiler);
executable_size = sljit_get_generated_code_size(compiler);
@@ -10318,8 +10307,7 @@
sljit_free_compiler(compiler);
if (executable_func == NULL)
{
- if (common->read_only_data)
- SLJIT_FREE(common->read_only_data);
+ free_read_only_data(common->read_only_data_head, compiler->allocator_data);
return;
}
@@ -10337,14 +10325,13 @@
* bit remains set, as the bit indicates that the pointer to the data
* is valid.)
*/
- functions = SLJIT_MALLOC(sizeof(executable_functions));
+ functions = SLJIT_MALLOC(sizeof(executable_functions), compiler->allocator_data);
if (functions == NULL)
{
/* This case is highly unlikely since we just recently
freed a lot of memory. Not impossible though. */
sljit_free_code(executable_func);
- if (common->read_only_data)
- SLJIT_FREE(common->read_only_data);
+ free_read_only_data(common->read_only_data_head, compiler->allocator_data);
return;
}
memset(functions, 0, sizeof(executable_functions));
@@ -10355,14 +10342,14 @@
}
functions->executable_funcs[mode] = executable_func;
-functions->read_only_data[mode] = common->read_only_data;
+functions->read_only_data_heads[mode] = common->read_only_data_head;
functions->executable_sizes[mode] = executable_size;
}
-static int jit_machine_stack_exec(jit_arguments *arguments, void* executable_func)
+static SLJIT_NOINLINE int jit_machine_stack_exec(jit_arguments *arguments, void *executable_func)
{
union {
- void* executable_func;
+ void *executable_func;
jit_function call_executable_func;
} convert_executable_func;
pcre_uint8 local_space[MACHINE_STACK_SIZE];
@@ -10383,7 +10370,7 @@
{
executable_functions *functions = (executable_functions *)extra_data->executable_jit;
union {
- void* executable_func;
+ void *executable_func;
jit_function call_executable_func;
} convert_executable_func;
jit_arguments arguments;
@@ -10470,7 +10457,7 @@
pcre_uchar *subject_ptr = (pcre_uchar *)subject;
executable_functions *functions = (executable_functions *)extra_data->executable_jit;
union {
- void* executable_func;
+ void *executable_func;
jit_function call_executable_func;
} convert_executable_func;
jit_arguments arguments;
@@ -10542,10 +10529,9 @@
{
if (functions->executable_funcs[i] != NULL)
sljit_free_code(functions->executable_funcs[i]);
- if (functions->read_only_data[i] != NULL)
- SLJIT_FREE(functions->read_only_data[i]);
+ free_read_only_data(functions->read_only_data_heads[i], NULL);
}
-SLJIT_FREE(functions);
+SLJIT_FREE(functions, compiler->allocator_data);
}
int
@@ -10582,7 +10568,7 @@
startsize = maxsize;
startsize = (startsize + STACK_GROWTH_RATE - 1) & ~(STACK_GROWTH_RATE - 1);
maxsize = (maxsize + STACK_GROWTH_RATE - 1) & ~(STACK_GROWTH_RATE - 1);
-return (PUBL(jit_stack)*)sljit_allocate_stack(startsize, maxsize);
+return (PUBL(jit_stack)*)sljit_allocate_stack(startsize, maxsize, NULL);
}
#if defined COMPILE_PCRE8
@@ -10596,7 +10582,7 @@
pcre32_jit_stack_free(pcre32_jit_stack *stack)
#endif
{
-sljit_free_stack((struct sljit_stack *)stack);
+sljit_free_stack((struct sljit_stack *)stack, NULL);
}
#if defined COMPILE_PCRE8
diff --git a/dist/pcre_jit_test.c b/dist/pcre_jit_test.c
index a40913e..d03993b 100644
--- a/dist/pcre_jit_test.c
+++ b/dist/pcre_jit_test.c
@@ -51,8 +51,6 @@
#include "pcre_internal.h"
-#define PCRE_BUG 0x80000000
-
/*
Letter characters:
\xe6\x92\xad = 0x64ad = 25773 (kanji)
@@ -69,6 +67,9 @@
\xc3\x89 = 0xc9 = 201 (E')
\xc3\xa1 = 0xe1 = 225 (a')
\xc3\x81 = 0xc1 = 193 (A')
+ \x53 = 0x53 = S
+ \x73 = 0x73 = s
+ \xc5\xbf = 0x17f = 383 (long S)
\xc8\xba = 0x23a = 570
\xe2\xb1\xa5 = 0x2c65 = 11365
\xe1\xbd\xb8 = 0x1f78 = 8056
@@ -78,6 +79,10 @@
\xc7\x84 = 0x1c4 = 452
\xc7\x85 = 0x1c5 = 453
\xc7\x86 = 0x1c6 = 454
+ Caseless sets:
+ ucp_Armenian - \x{531}-\x{556} -> \x{561}-\x{586}
+ ucp_Coptic - \x{2c80}-\x{2ce3} -> caseless: XOR 0x1
+ ucp_Latin - \x{ff21}-\x{ff3a} -> \x{ff41]-\x{ff5a}
Mark property:
\xcc\x8d = 0x30d = 781
@@ -626,6 +631,9 @@
{ MUA, 0, "(?P<Name>a)?(?P<Name2>b)?(?(Name)c|d)+?dd", "bcabcacdb bdddd" },
{ MUA, 0, "(?P<Name>a)?(?P<Name2>b)?(?(Name)c|d)+l", "ababccddabdbccd abcccl" },
{ MUA, 0, "((?:a|aa)(?(1)aaa))x", "aax" },
+ { MUA, 0, "(?(?!)a|b)", "ab" },
+ { MUA, 0, "(?(?!)a)", "ab" },
+ { MUA, 0 | F_NOMATCH, "(?(?!)a|b)", "ac" },
/* Set start of match. */
{ MUA, 0, "(?:\\Ka)*aaaab", "aaaaaaaa aaaaaaabb" },
@@ -944,7 +952,7 @@
pcre16_assign_jit_stack(extra, callback16, getstack16());
}
-#endif /* SUPPORT_PCRE8 */
+#endif /* SUPPORT_PCRE16 */
#ifdef SUPPORT_PCRE32
static pcre32_jit_stack *stack32;
@@ -967,7 +975,7 @@
pcre32_assign_jit_stack(extra, callback32, getstack32());
}
-#endif /* SUPPORT_PCRE8 */
+#endif /* SUPPORT_PCRE32 */
#ifdef SUPPORT_PCRE16
@@ -1177,7 +1185,7 @@
#elif defined SUPPORT_PCRE16
pcre16_config(PCRE_CONFIG_UTF16, &utf);
pcre16_config(PCRE_CONFIG_UNICODE_PROPERTIES, &ucp);
-#elif defined SUPPORT_PCRE16
+#elif defined SUPPORT_PCRE32
pcre32_config(PCRE_CONFIG_UTF32, &utf);
pcre32_config(PCRE_CONFIG_UNICODE_PROPERTIES, &ucp);
#endif
diff --git a/dist/pcre_stringpiece.h b/dist/pcre_stringpiece.h
index 4e758ef..cc3dc42 100644
--- a/dist/pcre_stringpiece.h
+++ b/dist/pcre_stringpiece.h
@@ -42,10 +42,10 @@
#include <string>
#include <iosfwd> // for ostream forward-declaration
-#if 0 /* @pcre_have_type_traits@ */
+#if 0
#define HAVE_TYPE_TRAITS
#include <type_traits.h>
-#elif 0 /* @pcre_have_bits_type_traits@ */
+#elif 0
#define HAVE_TYPE_TRAITS
#include <bits/type_traits.h>
#endif
diff --git a/dist/pcre_study.c b/dist/pcre_study.c
index f19d9fb..998fe23 100644
--- a/dist/pcre_study.c
+++ b/dist/pcre_study.c
@@ -70,7 +70,7 @@
code pointer to start of group (the bracket)
startcode pointer to start of the whole pattern's code
options the compiling options
- int RECURSE depth
+ recurses chain of recurse_check to catch mutual recursion
Returns: the minimum length
-1 if \C in UTF-8 mode or (*ACCEPT) was encountered
@@ -80,12 +80,13 @@
static int
find_minlength(const REAL_PCRE *re, const pcre_uchar *code,
- const pcre_uchar *startcode, int options, int recurse_depth)
+ const pcre_uchar *startcode, int options, recurse_check *recurses)
{
int length = -1;
/* PCRE_UTF16 has the same value as PCRE_UTF8. */
BOOL utf = (options & PCRE_UTF8) != 0;
BOOL had_recurse = FALSE;
+recurse_check this_recurse;
register int branchlength = 0;
register pcre_uchar *cc = (pcre_uchar *)code + 1 + LINK_SIZE;
@@ -130,7 +131,7 @@
case OP_SBRAPOS:
case OP_ONCE:
case OP_ONCE_NC:
- d = find_minlength(re, cc, startcode, options, recurse_depth);
+ d = find_minlength(re, cc, startcode, options, recurses);
if (d < 0) return d;
branchlength += d;
do cc += GET(cc, 1); while (*cc == OP_ALT);
@@ -393,7 +394,7 @@
ce = cs = (pcre_uchar *)PRIV(find_bracket)(startcode, utf, GET2(slot, 0));
if (cs == NULL) return -2;
do ce += GET(ce, 1); while (*ce == OP_ALT);
- if (cc > cs && cc < ce)
+ if (cc > cs && cc < ce) /* Simple recursion */
{
d = 0;
had_recurse = TRUE;
@@ -401,8 +402,22 @@
}
else
{
- int dd = find_minlength(re, cs, startcode, options, recurse_depth);
- if (dd < d) d = dd;
+ recurse_check *r = recurses;
+ for (r = recurses; r != NULL; r = r->prev) if (r->group == cs) break;
+ if (r != NULL) /* Mutual recursion */
+ {
+ d = 0;
+ had_recurse = TRUE;
+ break;
+ }
+ else
+ {
+ int dd;
+ this_recurse.prev = recurses;
+ this_recurse.group = cs;
+ dd = find_minlength(re, cs, startcode, options, &this_recurse);
+ if (dd < d) d = dd;
+ }
}
slot += re->name_entry_size;
}
@@ -418,14 +433,26 @@
ce = cs = (pcre_uchar *)PRIV(find_bracket)(startcode, utf, GET2(cc, 1));
if (cs == NULL) return -2;
do ce += GET(ce, 1); while (*ce == OP_ALT);
- if (cc > cs && cc < ce)
+ if (cc > cs && cc < ce) /* Simple recursion */
{
d = 0;
had_recurse = TRUE;
}
else
{
- d = find_minlength(re, cs, startcode, options, recurse_depth);
+ recurse_check *r = recurses;
+ for (r = recurses; r != NULL; r = r->prev) if (r->group == cs) break;
+ if (r != NULL) /* Mutual recursion */
+ {
+ d = 0;
+ had_recurse = TRUE;
+ }
+ else
+ {
+ this_recurse.prev = recurses;
+ this_recurse.group = cs;
+ d = find_minlength(re, cs, startcode, options, &this_recurse);
+ }
}
}
else d = 0;
@@ -474,12 +501,21 @@
case OP_RECURSE:
cs = ce = (pcre_uchar *)startcode + GET(cc, 1);
do ce += GET(ce, 1); while (*ce == OP_ALT);
- if ((cc > cs && cc < ce) || recurse_depth > 10)
+ if (cc > cs && cc < ce) /* Simple recursion */
had_recurse = TRUE;
else
{
- branchlength += find_minlength(re, cs, startcode, options,
- recurse_depth + 1);
+ recurse_check *r = recurses;
+ for (r = recurses; r != NULL; r = r->prev) if (r->group == cs) break;
+ if (r != NULL) /* Mutual recursion */
+ had_recurse = TRUE;
+ else
+ {
+ this_recurse.prev = recurses;
+ this_recurse.group = cs;
+ branchlength += find_minlength(re, cs, startcode, options,
+ &this_recurse);
+ }
}
cc += 1 + LINK_SIZE;
break;
@@ -1503,7 +1539,7 @@
/* Find the minimum length of subject string. */
-switch(min = find_minlength(re, code, code, re->options, 0))
+switch(min = find_minlength(re, code, code, re->options, NULL))
{
case -2: *errorptr = "internal error: missing capturing bracket"; return NULL;
case -3: *errorptr = "internal error: opcode not recognized"; return NULL;
diff --git a/dist/pcrecpp.cc b/dist/pcrecpp.cc
index 300dd5a..c595cbc 100644
--- a/dist/pcrecpp.cc
+++ b/dist/pcrecpp.cc
@@ -812,10 +812,6 @@
void* dest,
int radix) {
#ifndef HAVE_LONG_LONG
- (void)(str);
- (void)(n);
- (void)(dest);
- (void)(radix);
return false;
#else
if (n == 0) return false;
@@ -847,10 +843,6 @@
void* dest,
int radix) {
#ifndef HAVE_UNSIGNED_LONG_LONG
- (void)(str);
- (void)(n);
- (void)(dest);
- (void)(radix);
return false;
#else
if (n == 0) return false;
diff --git a/dist/pcrecpparg.h b/dist/pcrecpparg.h
index 59c7dc6..b4f9c3f 100644
--- a/dist/pcrecpparg.h
+++ b/dist/pcrecpparg.h
@@ -78,10 +78,10 @@
PCRE_MAKE_PARSER(unsigned int, parse_uint);
PCRE_MAKE_PARSER(long, parse_long);
PCRE_MAKE_PARSER(unsigned long, parse_ulong);
-#if 1 /* @pcre_have_long_long@ */
+#if 1
PCRE_MAKE_PARSER(long long, parse_longlong);
#endif
-#if 1 /* @pcre_have_ulong_long@ */
+#if 1
PCRE_MAKE_PARSER(unsigned long long, parse_ulonglong);
#endif
PCRE_MAKE_PARSER(float, parse_float);
@@ -157,10 +157,10 @@
MAKE_INTEGER_PARSER(unsigned int, uint) /* after these statement */
MAKE_INTEGER_PARSER(long, long) /* because they can cause */
MAKE_INTEGER_PARSER(unsigned long, ulong) /* compiler warnings if */
-#if 1 /* @pcre_have_long_long@ */ /* the checking level is */
+#if 1 /* the checking level is */
MAKE_INTEGER_PARSER(long long, longlong) /* turned up high enough. */
#endif /* */
-#if 1 /* @pcre_have_ulong_long@ */ /* */
+#if 1 /* */
MAKE_INTEGER_PARSER(unsigned long long, ulonglong) /* */
#endif
diff --git a/dist/pcregexp.pas b/dist/pcregexp.pas
index 77afd56..bb2b3da 100644
--- a/dist/pcregexp.pas
+++ b/dist/pcregexp.pas
@@ -1,845 +1,845 @@
-{
- pcRegExp - Perl compatible regular expressions for Virtual Pascal
- (c) 2001 Peter S. Voronov aka Chem O'Dun <petervrn@yahoo.com>
-
- Based on PCRE library interface unit for Virtual Pascal.
- (c) 2001 Alexander Tokarev <dwalin@dwalin.ru>
-
- The current PCRE version is: 3.7
-
- This software may be distributed under the terms of the modified BSD license
- Copyright (c) 2001, Alexander Tokarev
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
-
- * Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation
- and/or other materials provided with the distribution.
- * Neither the name of the <ORGANIZATION> nor the names of its contributors
- may be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
- ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- The PCRE library is written by: Philip Hazel <ph10@cam.ac.uk>
- Copyright (c) 1997-2004 University of Cambridge
-
- AngelsHolocaust 4-11-04 updated to use version v5.0
- (INFO: this is regex-directed, NFA)
- AH: 9-11-04 - pcre_free: removed var, pcre already gives the ptr, now
- everything works as it should (no more crashes)
- -> removed CheckRegExp because pcre handles errors perfectly
- 10-11-04 - added pcError (errorhandling), pcInit
- 13-11-04 - removed the ErrorPos = 0 check -> always print erroroffset
- 17-10-05 - support for \1-\9 backreferences in TpcRegExp.GetReplStr
- 17-02-06 - added RunTimeOptions: caller can set options while searching
- 19-02-06 - added SearchOfs(): let PCRE use the complete string and offset
- into the string itself
- 20-12-06 - support for version 7.0
- 27.08.08 - support for v7.7
-}
-
-{$H+} {$DEFINE PCRE_3_7} {$DEFINE PCRE_5_0} {$DEFINE PCRE_7_0} {$DEFINE PCRE_7_7}
-
-Unit pcregexp;
-
-Interface
-
-uses objects;
-
-Type
- PpcRegExp = ^TpcRegExp;
-// TpcRegExp = object
- TpcRegExp = object(TObject)
- MatchesCount: integer;
- RegExpC, RegExpExt : Pointer;
- Matches:Pointer;
- RegExp: shortstring;
- SourceLen: integer;
- PartialMatch : boolean;
- Error : boolean;
- ErrorMsg : Pchar;
- ErrorPos : integer;
- RunTimeOptions: Integer; // options which can be set by the caller
- constructor Init(const ARegExp : shortstring; AOptions : integer; ALocale : Pointer);
- function Search(AStr: Pchar; ALen : longint) : boolean; virtual;
- function SearchNext( AStr: Pchar; ALen : longint) : boolean; virtual;
- function SearchOfs ( AStr: Pchar; ALen, AOfs : longint) : boolean; virtual;
- function MatchSub(ANom: integer; var Pos, Len : longint) : boolean; virtual;
- function MatchFull(var Pos, Len : longint) : boolean; virtual;
- function GetSubStr(ANom: integer; AStr: Pchar) : string; virtual;
- function GetFullStr(AStr: Pchar) : string; virtual;
- function GetReplStr(AStr: Pchar; const ARepl: string) : string; virtual;
- function GetPreSubStr(AStr: Pchar) : string; virtual;
- function GetPostSubStr(AStr: Pchar) : string; virtual;
- function ErrorStr : string; virtual;
- destructor Done; virtual;
- end;
-
- function pcGrepMatch(WildCard, aStr: string; AOptions:integer; ALocale : Pointer): Boolean;
- function pcGrepSub(WildCard, aStr, aRepl: string; AOptions:integer; ALocale : Pointer): string;
-
- function pcFastGrepMatch(WildCard, aStr: string): Boolean;
- function pcFastGrepSub(WildCard, aStr, aRepl: string): string;
-
-{$IFDEF PCRE_5_0}
- function pcGetVersion : pchar;
-{$ENDIF}
-
- function pcError (var pRegExp : Pointer) : Boolean;
- function pcInit (const Pattern: Shortstring; CaseSens: Boolean) : Pointer;
-
-Const { Options }
- PCRE_CASELESS = $0001;
- PCRE_MULTILINE = $0002;
- PCRE_DOTALL = $0004;
- PCRE_EXTENDED = $0008;
- PCRE_ANCHORED = $0010;
- PCRE_DOLLAR_ENDONLY = $0020;
- PCRE_EXTRA = $0040;
- PCRE_NOTBOL = $0080;
- PCRE_NOTEOL = $0100;
- PCRE_UNGREEDY = $0200;
- PCRE_NOTEMPTY = $0400;
-{$IFDEF PCRE_5_0}
- PCRE_UTF8 = $0800;
- PCRE_NO_AUTO_CAPTURE = $1000;
- PCRE_NO_UTF8_CHECK = $2000;
- PCRE_AUTO_CALLOUT = $4000;
- PCRE_PARTIAL = $8000;
-{$ENDIF}
-{$IFDEF PCRE_7_0}
- PCRE_DFA_SHORTEST = $00010000;
- PCRE_DFA_RESTART = $00020000;
- PCRE_FIRSTLINE = $00040000;
- PCRE_DUPNAMES = $00080000;
- PCRE_NEWLINE_CR = $00100000;
- PCRE_NEWLINE_LF = $00200000;
- PCRE_NEWLINE_CRLF = $00300000;
- PCRE_NEWLINE_ANY = $00400000;
- PCRE_NEWLINE_ANYCRLF = $00500000;
-
- PCRE_NEWLINE_BITS = PCRE_NEWLINE_CR or PCRE_NEWLINE_LF or PCRE_NEWLINE_ANY;
-
-{$ENDIF}
-{$IFDEF PCRE_7_7}
- PCRE_BSR_ANYCRLF = $00800000;
- PCRE_BSR_UNICODE = $01000000;
- PCRE_JAVASCRIPT_COMPAT= $02000000;
-{$ENDIF}
-
- PCRE_COMPILE_ALLOWED_OPTIONS = PCRE_ANCHORED + PCRE_AUTO_CALLOUT + PCRE_CASELESS +
- PCRE_DOLLAR_ENDONLY + PCRE_DOTALL + PCRE_EXTENDED +
- PCRE_EXTRA + PCRE_MULTILINE + PCRE_NO_AUTO_CAPTURE +
- PCRE_UNGREEDY + PCRE_UTF8 + PCRE_NO_UTF8_CHECK
- {$IFDEF PCRE_7_0}
- + PCRE_DUPNAMES + PCRE_FIRSTLINE + PCRE_NEWLINE_BITS
- {$ENDIF}
- {$IFDEF PCRE_7_7}
- + PCRE_BSR_ANYCRLF + PCRE_BSR_UNICODE + PCRE_JAVASCRIPT_COMPAT
- {$ENDIF}
- ;
-
- PCRE_EXEC_ALLOWED_OPTIONS = PCRE_ANCHORED + PCRE_NOTBOL + PCRE_NOTEOL +
- PCRE_NOTEMPTY + PCRE_NO_UTF8_CHECK + PCRE_PARTIAL
- {$IFDEF PCRE_7_0}
- + PCRE_NEWLINE_BITS
- {$ENDIF}
- {$IFDEF PCRE_7_7}
- + PCRE_BSR_ANYCRLF + PCRE_BSR_UNICODE
- {$ENDIF}
- ;
-
-{$IFDEF PCRE_7_0}
- PCRE_DFA_EXEC_ALLOWED_OPTIONS = PCRE_ANCHORED + PCRE_NOTBOL + PCRE_NOTEOL +
- PCRE_NOTEMPTY + PCRE_NO_UTF8_CHECK + PCRE_PARTIAL +
- PCRE_DFA_SHORTEST + PCRE_DFA_RESTART +
- PCRE_NEWLINE_BITS
- {$IFDEF PCRE_7_7}
- + PCRE_BSR_ANYCRLF + PCRE_BSR_UNICODE
- {$ENDIF}
- ;
-{$ENDIF}
-
-{ Exec-time and get/set-time error codes }
- PCRE_ERROR_NOMATCH = -1;
- PCRE_ERROR_NULL = -2;
- PCRE_ERROR_BADOPTION = -3;
- PCRE_ERROR_BADMAGIC = -4;
- PCRE_ERROR_UNKNOWN_MODE = -5;
- PCRE_ERROR_NOMEMORY = -6;
- PCRE_ERROR_NOSUBSTRING = -7;
-{$IFDEF PCRE_5_0}
- PCRE_ERROR_MATCHLIMIT = -8;
- PCRE_ERROR_CALLOUT = -9; { Never used by PCRE itself }
- PCRE_ERROR_BADUTF8 = -10;
- PCRE_ERROR_BADUTF8_OFFSET = -11;
- PCRE_ERROR_PARTIAL = -12;
- PCRE_ERROR_BADPARTIAL = -13;
- PCRE_ERROR_INTERNAL = -14;
- PCRE_ERROR_BADCOUNT = -15;
-{$ENDIF}
-{$IFDEF PCRE_7_0}
- PCRE_ERROR_DFA_UITEM = -16;
- PCRE_ERROR_DFA_UCOND = -17;
- PCRE_ERROR_DFA_UMLIMIT = -18;
- PCRE_ERROR_DFA_WSSIZE = -19;
- PCRE_ERROR_DFA_RECURSE = -20;
- PCRE_ERROR_RECURSIONLIMIT = -21;
- PCRE_ERROR_NULLWSLIMIT = -22;
- PCRE_ERROR_BADNEWLINE = -23;
-{$ENDIF}
-
-{ Request types for pcre_fullinfo() }
-
- PCRE_INFO_OPTIONS = 0;
- PCRE_INFO_SIZE = 1;
- PCRE_INFO_CAPTURECOUNT = 2;
- PCRE_INFO_BACKREFMAX = 3;
- PCRE_INFO_FIRSTBYTE = 4;
- PCRE_INFO_FIRSTCHAR = 4; { For backwards compatibility }
- PCRE_INFO_FIRSTTABLE = 5;
-{$IFDEF PCRE_5_0}
- PCRE_INFO_LASTLITERAL = 6;
- PCRE_INFO_NAMEENTRYSIZE = 7;
- PCRE_INFO_NAMECOUNT = 8;
- PCRE_INFO_NAMETABLE = 9;
- PCRE_INFO_STUDYSIZE = 10;
- PCRE_INFO_DEFAULT_TABLES = 11;
-{$ENDIF PCRE_5_0}
-{$IFDEF PCRE_7_7}
- PCRE_INFO_OKPARTIAL = 12;
- PCRE_INFO_JCHANGED = 13;
- PCRE_INFO_HASCRORLF = 14;
-{$ENDIF}
-
-{ Request types for pcre_config() }
-{$IFDEF PCRE_5_0}
- PCRE_CONFIG_UTF8 = 0;
- PCRE_CONFIG_NEWLINE = 1;
- PCRE_CONFIG_LINK_SIZE = 2;
- PCRE_CONFIG_POSIX_MALLOC_THRESHOLD = 3;
- PCRE_CONFIG_MATCH_LIMIT = 4;
- PCRE_CONFIG_STACKRECURSE = 5;
- PCRE_CONFIG_UNICODE_PROPERTIES = 6;
-{$ENDIF PCRE_5_0}
-{$IFDEF PCRE_7_0}
- PCRE_CONFIG_MATCH_LIMIT_RECURSION = 7;
-{$ENDIF}
-{$IFDEF PCRE_7_7}
- PCRE_CONFIG_BSR = 8;
-{$ENDIF}
-
-{ Bit flags for the pcre_extra structure }
-{$IFDEF PCRE_5_0}
- PCRE_EXTRA_STUDY_DATA = $0001;
- PCRE_EXTRA_MATCH_LIMIT = $0002;
- PCRE_EXTRA_CALLOUT_DATA = $0004;
- PCRE_EXTRA_TABLES = $0008;
-{$ENDIF PCRE_5_0}
-{$IFDEF PCRE_7_0}
- PCRE_EXTRA_MATCH_LIMIT_RECURSION = $0010;
-{$ENDIF}
-
-Const
-// DefaultOptions : integer = 0;
- DefaultLocaleTable : pointer = nil;
-
-{$IFDEF PCRE_5_0}
-{ The structure for passing additional data to pcre_exec(). This is defined in
-such as way as to be extensible. Always add new fields at the end, in order to
-remain compatible. }
-
-type ppcre_extra = ^tpcre_extra;
- tpcre_extra = record
- flags : longint; { Bits for which fields are set }
- study_data : pointer; { Opaque data from pcre_study() }
- match_limit : longint; { Maximum number of calls to match() }
- callout_data : pointer; { Data passed back in callouts }
- tables : pointer; { Pointer to character tables }
- match_limit_recursion: longint; { Max recursive calls to match() }
- end;
-
-type ppcre_callout_block = ^pcre_callout_block;
- pcre_callout_block = record
- version,
- (* ------------------------ Version 0 ------------------------------- *)
- callout_number : integer;
- offset_vector : pointer;
- subject : pchar;
- subject_length, start_match, current_position, capture_top,
- capture_last : integer;
- callout_data : pointer;
- (* ------------------- Added for Version 1 -------------------------- *)
- pattern_position, next_item_length : integer;
- end;
-{$ENDIF PCRE_5_0}
-
-{$OrgName+}
-{$IFDEF VIRTUALPASCAL} {&Cdecl+} {$ENDIF VIRTUALPASCAL}
-
- { local replacement of external pcre memory management functions }
- function pcre_malloc( size : integer ) : pointer;
- procedure pcre_free( {var} p : pointer );
-{$IFDEF PCRE_5_0}
- const pcre_stack_malloc: function ( size : integer ): pointer = pcre_malloc;
- pcre_stack_free: procedure ( {var} p : pointer ) = pcre_free;
- function pcre_callout(var p : ppcre_callout_block) : integer;
-{$ENDIF PCRE_5_0}
-{$IFDEF VIRTUALPASCAL} {&Cdecl-} {$ENDIF VIRTUALPASCAL}
-
-Implementation
-
-Uses strings, collect, messages, dnapp, commands, advance0, stringsx
- {$IFDEF VIRTUALPASCAL} ,vpsyslow {$ENDIF VIRTUALPASCAL};
-
-Const
- MAGIC_NUMBER = $50435245; { 'PCRE' }
- MAX_MATCHES = 90; { changed in 3.5 version; should be divisible by 3, was 64}
-
-Type
- PMatchArray = ^TMatchArray;
- TMatchArray = array[0..( MAX_MATCHES * 3 )] of integer;
-
- PRegExpCollection = ^TRegExpCollection;
- TRegExpCollection = object(TSortedCollection)
- MaxRegExp : integer;
- SearchRegExp : shortstring;
- CompareModeInsert : boolean;
- constructor Init(AMaxRegExp:integer);
- procedure FreeItem(P: Pointer); virtual;
- function Compare(P1, P2: Pointer): Integer; virtual;
- function Find(ARegExp:shortstring;var P: PpcRegExp):boolean; virtual;
- function CheckNew(ARegExp:shortstring):PpcRegExp;virtual;
- end;
-
-Var
- PRegExpCache : PRegExpCollection;
-
-
-{$IFDEF VIRTUALPASCAL} {&Cdecl+} {$ENDIF VIRTUALPASCAL}
-
- { imported original pcre functions }
-
- function pcre_compile( const pattern : PChar; options : integer;
- var errorptr : PChar; var erroroffset : integer;
- const tables : PChar ) : pointer {pcre}; external;
-{$IFDEF PCRE_7_0}
- function pcre_compile2( const pattern : PChar; options : integer;
- var errorcodeptr : Integer;
- var errorptr : PChar; var erroroffset : integer;
- const tables : PChar ) : pointer {pcre}; external;
-{$ENDIF}
-{$IFDEF PCRE_5_0}
- function pcre_config( what : integer; where : pointer) : integer; external;
- function pcre_copy_named_substring( const code : pointer {pcre};
- const subject : pchar;
- var ovector : integer;
- stringcount : integer;
- const stringname : pchar;
- var buffer : pchar;
- size : integer) : integer; external;
- function pcre_copy_substring( const subject : pchar; var ovector : integer;
- stringcount, stringnumber : integer;
- var buffer : pchar; size : integer )
- : integer; external;
- function pcre_exec( const argument_re : pointer {pcre};
- const extra_data : pointer {pcre_extra};
-{$ELSE}
- function pcre_exec( const external_re : pointer;
- const external_extra : pointer;
-{$ENDIF}
- const subject : PChar;
- length, start_offset, options : integer;
- offsets : pointer;
- offsetcount : integer ) : integer; external;
-{$IFDEF PCRE_7_0}
- function pcre_dfa_exec( const argument_re : pointer {pcre};
- const extra_data : pointer {pcre_extra};
- const subject : pchar;
- length, start_offset, options : integer;
- offsets : pointer;
- offsetcount : integer;
- workspace : pointer;
- wscount : integer ) : integer; external;
-{$ENDIF}
-{$IFDEF PCRE_5_0}
- procedure pcre_free_substring( const p : pchar ); external;
- procedure pcre_free_substring_list( var p : pchar ); external;
- function pcre_fullinfo( const argument_re : pointer {pcre};
- const extra_data : pointer {pcre_extra};
- what : integer;
- where : pointer ) : integer; external;
- function pcre_get_named_substring( const code : pointer {pcre};
- const subject : pchar;
- var ovector : integer;
- stringcount : integer;
- const stringname : pchar;
- var stringptr : pchar ) : integer; external;
- function pcre_get_stringnumber( const code : pointer {pcre};
- const stringname : pchar ) : integer; external;
- function pcre_get_stringtable_entries( const code : pointer {pcre};
- const stringname : pchar;
- var firstptr,
- lastptr : pchar ) : integer; external;
- function pcre_get_substring( const subject : pchar; var ovector : integer;
- stringcount, stringnumber : integer;
- var stringptr : pchar ) : integer; external;
- function pcre_get_substring_list( const subject : pchar; var ovector : integer;
- stringcount : integer;
- listptr : pointer {const char ***listptr}) : integer; external;
- function pcre_info( const argument_re : pointer {pcre};
- var optptr : integer;
- var first_byte : integer ) : integer; external;
- function pcre_maketables : pchar; external;
-{$ENDIF}
-{$IFDEF PCRE_7_0}
- function pcre_refcount( const argument_re : pointer {pcre};
- adjust : integer ) : pchar; external;
-{$ENDIF}
- function pcre_study( const external_re : pointer {pcre};
- options : integer;
- var errorptr : PChar ) : pointer {pcre_extra}; external;
-{$IFDEF PCRE_5_0}
- function pcre_version : pchar; external;
-{$ENDIF}
-
- function pcre_malloc( size : integer ) : pointer;
- begin
- GetMem( result, size );
- end;
-
- procedure pcre_free( {var} p : pointer );
- begin
- if (p <> nil) then
- FreeMem( p, 0 );
- {@p := nil;}
- end;
-
-{$IFDEF PCRE_5_0}
-(* Called from PCRE as a result of the (?C) item. We print out where we are in
-the match. Yield zero unless more callouts than the fail count, or the callout
-data is not zero. *)
-
- function pcre_callout;
- begin
- end;
-{$ENDIF}
-
-{$IFDEF VIRTUALPASCAL} {&Cdecl-} {$ENDIF VIRTUALPASCAL}
-
-// Always include the newest version of the library
-{$IFDEF PCRE_7_7}
- {$L pcre77.lib}
-{$ELSE}
- {$IFDEF PCRE_7_0}
- {$L pcre70.lib}
- {$ELSE}
- {$IFDEF PCRE_5_0}
- {$L pcre50.lib}
- {$ELSE}
- {$IFDEF PCRE_3_7}
- {$L pcre37.lib}
- {$ENDIF PCRE_3_7}
- {$ENDIF PCRE_5_0}
- {$ENDIF PCRE_7_0}
-{$ENDIF PCRE_7_7}
-
-{TpcRegExp}
-
- constructor TpcRegExp.Init(const ARegExp:shortstring; AOptions:integer; ALocale : Pointer);
- var
- pRegExp : PChar;
- begin
- RegExp:=ARegExp;
- RegExpC:=nil;
- RegExpExt:=nil;
- Matches:=nil;
- MatchesCount:=0;
- Error:=true;
- ErrorMsg:=nil;
- ErrorPos:=0;
- RunTimeOptions := 0;
- if length(RegExp) < 255 then
- begin
- RegExp[length(RegExp)+1]:=#0;
- pRegExp:=@RegExp[1];
- end
- else
- begin
- GetMem(pRegExp,length(RegExp)+1);
- pRegExp:=strpcopy(pRegExp,RegExp);
- end;
- RegExpC := pcre_compile( pRegExp,
- AOptions and PCRE_COMPILE_ALLOWED_OPTIONS,
- ErrorMsg, ErrorPos, ALocale);
- if length(RegExp) = 255 then
- StrDispose(pRegExp);
- if RegExpC = nil then
- exit;
- ErrorMsg:=nil;
- RegExpExt := pcre_study( RegExpC, 0, ErrorMsg );
- if (RegExpExt = nil) and (ErrorMsg <> nil) then
- begin
- pcre_free(RegExpC);
- exit;
- end;
- GetMem(Matches,SizeOf(TMatchArray));
- Error:=false;
- end;
-
- destructor TpcRegExp.Done;
- begin
- if RegExpC <> nil then
- pcre_free(RegExpC);
- if RegExpExt <> nil then
- pcre_free(RegExpExt);
- if Matches <> nil then
- FreeMem(Matches,SizeOf(TMatchArray));
- end;
-
- function TpcRegExp.SearchNext( AStr: Pchar; ALen : longint ) : boolean;
- var Options: Integer;
- begin // must handle PCRE_ERROR_PARTIAL here
- Options := (RunTimeOptions or startup.MiscMultiData.cfgRegEx.DefaultOptions) and
- PCRE_EXEC_ALLOWED_OPTIONS;
- if MatchesCount > 0 then
- MatchesCount:=pcre_exec( RegExpC, RegExpExt, AStr, ALen, PMatchArray(Matches)^[1],
- Options, Matches, MAX_MATCHES ) else
- MatchesCount:=pcre_exec( RegExpC, RegExpExt, AStr, ALen, 0,
- Options, Matches, MAX_MATCHES );
-{ if MatchesCount = 0 then
- MatchesCount := MatchesCount div 3;}
- PartialMatch := MatchesCount = PCRE_ERROR_PARTIAL;
- SearchNext := MatchesCount > 0;
- end;
-
- function TpcRegExp.Search( AStr: Pchar; ALen : longint):boolean;
- begin
- MatchesCount:=0;
- Search:=SearchNext(AStr,ALen);
- SourceLen:=ALen;
- end;
-
- function TpcRegExp.SearchOfs( AStr: Pchar; ALen, AOfs: longint ) : boolean;
- var Options: Integer;
- begin
- MatchesCount:=0;
- Options := (RunTimeOptions or startup.MiscMultiData.cfgRegEx.DefaultOptions) and
- PCRE_EXEC_ALLOWED_OPTIONS;
- MatchesCount:=pcre_exec( RegExpC, RegExpExt, AStr, ALen, AOfs,
- Options, Matches, MAX_MATCHES );
- PartialMatch := MatchesCount = PCRE_ERROR_PARTIAL;
- SearchOfs := MatchesCount > 0;
- SourceLen := ALen-AOfs;
- end;
-
- function TpcRegExp.MatchSub(ANom:integer; var Pos,Len:longint):boolean;
- begin
- if (MatchesCount > 0) and (ANom <= (MatchesCount-1)) then
- begin
- ANom:=ANom*2;
- Pos:=PMatchArray(Matches)^[ANom];
- Len:=PMatchArray(Matches)^[ANom+1]-Pos;
- MatchSub:=true;
- end
- else
- MatchSub:=false;
- end;
-
- function TpcRegExp.MatchFull(var Pos,Len:longint):boolean;
- begin
- MatchFull:=MatchSub(0,Pos,Len);
- end;
-
- function TpcRegExp.GetSubStr(ANom: integer; AStr: Pchar):string;
- var
- s: ansistring;
- pos,len: longint;
- begin
- s:='';
- if MatchSub(ANom, pos, len) then
- begin
- setlength(s, len);
- Move(AStr[pos], s[1], len);
- end;
- GetSubStr:=s;
- end;
-
- function TpcRegExp.GetPreSubStr(AStr: Pchar):string;
- var
- s: ansistring;
- l: longint;
- begin
- s:='';
- if (MatchesCount > 0) then
- begin
- l:=PMatchArray(Matches)^[0]-1;
- if l > 0 then
- begin
- setlength(s,l);
- Move(AStr[1],s[1],l);
- end;
- end;
- GetPreSubStr:=s;
- end;
-
- function TpcRegExp.GetPostSubStr(AStr: Pchar):string;
- var
- s: ansistring;
- l: longint;
- ANom: integer;
- begin
- s:='';
- if (MatchesCount > 0) then
- begin
- ANom:=(MatchesCount-1){*2} shl 1;
- l:=SourceLen-PMatchArray(Matches)^[ANom+1]+1;
- if l > 0 then
- begin
- setlength(s,l);
- Move(AStr[PMatchArray(Matches)^[ANom+1]],s[1],l);
- end;
- end;
- GetPostSubStr:=s;
- end;
-
-
- function TpcRegExp.GetFullStr(AStr: Pchar):string;
- var
- s: ansistring;
- l: longint;
- begin
- GetFullStr:=GetSubStr(0,AStr);
- end;
-
- function TpcRegExp.GetReplStr(AStr: Pchar; const ARepl: string):string;
- var
- s: ansistring;
- l,i,lasti: longint;
- begin
- l:=length(ARepl);
- i:=1;
- lasti:=1;
- s:='';
- while i <= l do
- begin
- case ARepl[i] of
- '\' :
- begin
- if i < l then
- begin
- s:=s+copy(ARepl,lasti,i-lasti){+ARepl[i+1]};
- {AH 17-10-05 support for POSIX \1-\9 backreferences}
- case ARepl[i+1] of
- '0' : s:=s+GetFullStr(AStr);
- '1'..'9' : s:=s+GetSubStr(ord(ARepl[i+1])-ord('0'),AStr);
- else s:=s+ARepl[i+1]; // copy the escaped character
- end;
- end;
- inc(i);
- lasti:=i+1;
- end;
- '$' :
- begin
- if i < l then
- begin
- s:=s+copy(ARepl,lasti,i-lasti);
- case ARepl[i+1] of
- '&' : s:=s+GetFullStr(AStr);
- '1'..'9' : s:=s+GetSubStr(ord(ARepl[i+1])-ord('0'),AStr);
- '`' : s:=s+GetPreSubStr(AStr);
- #39 : s:=s+GetPostSubStr(AStr);
- end;
- end;
- inc(i);
- lasti:=i+1;
- end;
- end;
- inc(i);
- end;
- if lasti <= {AH 25-10-2004 added =, else l==1 won't work} l then
- s:=s+copy(ARepl,lasti,l-lasti+1);
- GetReplStr:=s;
- end;
-
- function TpcRegExp.ErrorStr:string;
- begin
- ErrorStr:=StrPas(ErrorMsg);
- end;
-
-{TRegExpCollection}
-
-constructor TRegExpCollection.Init(AMaxRegExp: integer);
-begin
- Inherited Init(1,1);
- MaxRegExp:=AMaxRegExp;
- CompareModeInsert:=true;
-end;
-
-procedure TRegExpCollection.FreeItem(P: Pointer);
-begin
- if P <> nil then
- begin
- Dispose(PpcRegExp(P),Done);
- end;
-end;
-
-function TRegExpCollection.Compare(P1, P2: Pointer): Integer;
-//var
-// l,l1,l2,i : byte;
-//// wPos: pchar;
-begin
- if CompareModeInsert then
- begin
-// l1:=length(PpcRegExp(P1)^.RegExp);
-// l2:=length(PpcRegExp(P2)^.RegExp);
-// if l1 > l2 then l:=l2 else
-// l:=l1;
-// for i:=1 to l do
-// if PpcRegExp(P1).RegExp[i] <> PpcRegExp(P2).RegExp[i] then break;
-// if i <=l then
-// Compare:=ord(PpcRegExp(P1).RegExp[i])-ord(PpcRegExp(P2).RegExp[i]) else
-// Compare:=l1-l2;
- Compare := stringsx.PasStrCmp(PpcRegExp(P1).RegExp, PpcRegExp(P2).RegExp, False);
- end
- else
- begin
-// l1:=length(PpcRegExp(P1)^.RegExp);
-// l2:=length(SearchRegExp);
-// if l1 > l2 then l:=l2 else
-// l:=l1;
-// for i:=1 to l do
-// if PpcRegExp(P1).RegExp[i] <> SearchRegExp[i] then
-// begin
-// Compare:=ord(PpcRegExp(P1).RegExp[i])-ord(SearchRegExp[i]);
-// break;
-// end;
-// if i > l then Compare:=l1-l2;
- Compare := stringsx.PasStrCmp(PpcRegExp(P1).RegExp, SearchRegExp, False);
- end;
-end;
-
-function TRegExpCollection.Find(ARegExp:shortstring;var P: PpcRegExp):boolean;
-var I : integer;
-begin
- CompareModeInsert:=false;
- SearchRegExp:=ARegExp;
- if Search(nil,I) then
- begin
- P:=PpcRegExp(At(I));
- Find:=true;
- end
- else
- begin
- P:=nil;
- Find:=false;
- end;
- CompareModeInsert:=true;
-end;
-
-function TRegExpCollection.CheckNew(ARegExp:shortstring):PpcRegExp;
-var
- P : PpcRegExp;
-begin
- if not Find(ARegExp,P) then
- begin
- if Count = MaxRegExp then
- AtFree(0);
- P:=New(ppcRegExp,Init(ARegExp,PCRE_CASELESS,nil));
- Insert(P);
- end;
- CheckNew:=P;
-end;
-
-function pcGrepMatch(WildCard, aStr: string; AOptions:integer; ALocale : Pointer): Boolean;
-var
- PpcRE:PpcRegExp;
-begin
- PpcRE:=New(ppcRegExp,Init(WildCard,AOptions,Alocale));
- pcGrepMatch:=PpcRE^.Search(pchar(AStr),Length(AStr));
- Dispose(PpcRE,Done);
-end;
-
-function pcGrepSub(WildCard, aStr, aRepl: string; AOptions:integer; ALocale : Pointer): string;
-var
- PpcRE:PpcRegExp;
-begin
- PpcRE:=New(ppcRegExp,Init(WildCard,AOptions,Alocale));
- if PpcRE^.Search(pchar(AStr),Length(AStr)) then
- pcGrepSub:=PpcRE^.GetReplStr(pchar(AStr),ARepl)
- else
- pcGrepSub:='';
- Dispose(PpcRE,Done);
-end;
-
-function pcFastGrepMatch(WildCard, aStr: string): Boolean;
-var
- PpcRE:PpcRegExp;
-begin
- PpcRE:=PRegExpCache^.CheckNew(WildCard);
- pcFastGrepMatch:=PpcRE^.Search(pchar(AStr),Length(AStr));
-end;
-
-function pcFastGrepSub(WildCard, aStr, aRepl: string): string;
-var
- PpcRE:PpcRegExp;
-begin
- PpcRE:=PRegExpCache^.CheckNew(WildCard);
- if PpcRE^.Search(pchar(AStr),Length(AStr)) then
- pcFastGrepSub:=PpcRE^.GetReplStr(pchar(AStr),ARepl)
- else
- pcFastGrepSub:='';
-end;
-
-{$IFDEF PCRE_5_0}
-function pcGetVersion : pchar; assembler; {$FRAME-}{$USES none}
-asm
- call pcre_version
-end;
-{$ENDIF PCRE_5_0}
-
-function pcError;
-var P: ppcRegExp absolute pRegExp;
-begin
- Result := (P = nil) or P^.Error;
- If Result and (P <> nil) then
- begin
-{ if P^.ErrorPos = 0 then
- MessageBox(GetString(erRegExpCompile)+'"'+P^.ErrorStr+'"', nil,mfConfirmation+mfOkButton)
- else}
- MessageBox(GetString(erRegExpCompile)+'"'+P^.ErrorStr+'"'+GetString(erRegExpCompPos),
- @P^.ErrorPos,mfConfirmation+mfOkButton);
- Dispose(P, Done);
- P:=nil;
- end;
-end;
-
-function pcInit;
-var Options : Integer;
-begin
- If CaseSens then Options := 0 else Options := PCRE_CASELESS;
- Result := New( PpcRegExp, Init( Pattern,
- {DefaultOptions}
- startup.MiscMultiData.cfgRegEx.DefaultOptions or Options,
- DefaultLocaleTable) );
-end;
-
-Initialization
- PRegExpCache:=New(PRegExpCollection,Init(64));
-Finalization
- Dispose(PRegExpCache,Done);
-End.
+{
+ pcRegExp - Perl compatible regular expressions for Virtual Pascal
+ (c) 2001 Peter S. Voronov aka Chem O'Dun <petervrn@yahoo.com>
+
+ Based on PCRE library interface unit for Virtual Pascal.
+ (c) 2001 Alexander Tokarev <dwalin@dwalin.ru>
+
+ The current PCRE version is: 3.7
+
+ This software may be distributed under the terms of the modified BSD license
+ Copyright (c) 2001, Alexander Tokarev
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the name of the <ORGANIZATION> nor the names of its contributors
+ may be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ The PCRE library is written by: Philip Hazel <ph10@cam.ac.uk>
+ Copyright (c) 1997-2004 University of Cambridge
+
+ AngelsHolocaust 4-11-04 updated to use version v5.0
+ (INFO: this is regex-directed, NFA)
+ AH: 9-11-04 - pcre_free: removed var, pcre already gives the ptr, now
+ everything works as it should (no more crashes)
+ -> removed CheckRegExp because pcre handles errors perfectly
+ 10-11-04 - added pcError (errorhandling), pcInit
+ 13-11-04 - removed the ErrorPos = 0 check -> always print erroroffset
+ 17-10-05 - support for \1-\9 backreferences in TpcRegExp.GetReplStr
+ 17-02-06 - added RunTimeOptions: caller can set options while searching
+ 19-02-06 - added SearchOfs(): let PCRE use the complete string and offset
+ into the string itself
+ 20-12-06 - support for version 7.0
+ 27.08.08 - support for v7.7
+}
+
+{$H+} {$DEFINE PCRE_3_7} {$DEFINE PCRE_5_0} {$DEFINE PCRE_7_0} {$DEFINE PCRE_7_7}
+
+Unit pcregexp;
+
+Interface
+
+uses objects;
+
+Type
+ PpcRegExp = ^TpcRegExp;
+// TpcRegExp = object
+ TpcRegExp = object(TObject)
+ MatchesCount: integer;
+ RegExpC, RegExpExt : Pointer;
+ Matches:Pointer;
+ RegExp: shortstring;
+ SourceLen: integer;
+ PartialMatch : boolean;
+ Error : boolean;
+ ErrorMsg : Pchar;
+ ErrorPos : integer;
+ RunTimeOptions: Integer; // options which can be set by the caller
+ constructor Init(const ARegExp : shortstring; AOptions : integer; ALocale : Pointer);
+ function Search(AStr: Pchar; ALen : longint) : boolean; virtual;
+ function SearchNext( AStr: Pchar; ALen : longint) : boolean; virtual;
+ function SearchOfs ( AStr: Pchar; ALen, AOfs : longint) : boolean; virtual;
+ function MatchSub(ANom: integer; var Pos, Len : longint) : boolean; virtual;
+ function MatchFull(var Pos, Len : longint) : boolean; virtual;
+ function GetSubStr(ANom: integer; AStr: Pchar) : string; virtual;
+ function GetFullStr(AStr: Pchar) : string; virtual;
+ function GetReplStr(AStr: Pchar; const ARepl: string) : string; virtual;
+ function GetPreSubStr(AStr: Pchar) : string; virtual;
+ function GetPostSubStr(AStr: Pchar) : string; virtual;
+ function ErrorStr : string; virtual;
+ destructor Done; virtual;
+ end;
+
+ function pcGrepMatch(WildCard, aStr: string; AOptions:integer; ALocale : Pointer): Boolean;
+ function pcGrepSub(WildCard, aStr, aRepl: string; AOptions:integer; ALocale : Pointer): string;
+
+ function pcFastGrepMatch(WildCard, aStr: string): Boolean;
+ function pcFastGrepSub(WildCard, aStr, aRepl: string): string;
+
+{$IFDEF PCRE_5_0}
+ function pcGetVersion : pchar;
+{$ENDIF}
+
+ function pcError (var pRegExp : Pointer) : Boolean;
+ function pcInit (const Pattern: Shortstring; CaseSens: Boolean) : Pointer;
+
+Const { Options }
+ PCRE_CASELESS = $0001;
+ PCRE_MULTILINE = $0002;
+ PCRE_DOTALL = $0004;
+ PCRE_EXTENDED = $0008;
+ PCRE_ANCHORED = $0010;
+ PCRE_DOLLAR_ENDONLY = $0020;
+ PCRE_EXTRA = $0040;
+ PCRE_NOTBOL = $0080;
+ PCRE_NOTEOL = $0100;
+ PCRE_UNGREEDY = $0200;
+ PCRE_NOTEMPTY = $0400;
+{$IFDEF PCRE_5_0}
+ PCRE_UTF8 = $0800;
+ PCRE_NO_AUTO_CAPTURE = $1000;
+ PCRE_NO_UTF8_CHECK = $2000;
+ PCRE_AUTO_CALLOUT = $4000;
+ PCRE_PARTIAL = $8000;
+{$ENDIF}
+{$IFDEF PCRE_7_0}
+ PCRE_DFA_SHORTEST = $00010000;
+ PCRE_DFA_RESTART = $00020000;
+ PCRE_FIRSTLINE = $00040000;
+ PCRE_DUPNAMES = $00080000;
+ PCRE_NEWLINE_CR = $00100000;
+ PCRE_NEWLINE_LF = $00200000;
+ PCRE_NEWLINE_CRLF = $00300000;
+ PCRE_NEWLINE_ANY = $00400000;
+ PCRE_NEWLINE_ANYCRLF = $00500000;
+
+ PCRE_NEWLINE_BITS = PCRE_NEWLINE_CR or PCRE_NEWLINE_LF or PCRE_NEWLINE_ANY;
+
+{$ENDIF}
+{$IFDEF PCRE_7_7}
+ PCRE_BSR_ANYCRLF = $00800000;
+ PCRE_BSR_UNICODE = $01000000;
+ PCRE_JAVASCRIPT_COMPAT= $02000000;
+{$ENDIF}
+
+ PCRE_COMPILE_ALLOWED_OPTIONS = PCRE_ANCHORED + PCRE_AUTO_CALLOUT + PCRE_CASELESS +
+ PCRE_DOLLAR_ENDONLY + PCRE_DOTALL + PCRE_EXTENDED +
+ PCRE_EXTRA + PCRE_MULTILINE + PCRE_NO_AUTO_CAPTURE +
+ PCRE_UNGREEDY + PCRE_UTF8 + PCRE_NO_UTF8_CHECK
+ {$IFDEF PCRE_7_0}
+ + PCRE_DUPNAMES + PCRE_FIRSTLINE + PCRE_NEWLINE_BITS
+ {$ENDIF}
+ {$IFDEF PCRE_7_7}
+ + PCRE_BSR_ANYCRLF + PCRE_BSR_UNICODE + PCRE_JAVASCRIPT_COMPAT
+ {$ENDIF}
+ ;
+
+ PCRE_EXEC_ALLOWED_OPTIONS = PCRE_ANCHORED + PCRE_NOTBOL + PCRE_NOTEOL +
+ PCRE_NOTEMPTY + PCRE_NO_UTF8_CHECK + PCRE_PARTIAL
+ {$IFDEF PCRE_7_0}
+ + PCRE_NEWLINE_BITS
+ {$ENDIF}
+ {$IFDEF PCRE_7_7}
+ + PCRE_BSR_ANYCRLF + PCRE_BSR_UNICODE
+ {$ENDIF}
+ ;
+
+{$IFDEF PCRE_7_0}
+ PCRE_DFA_EXEC_ALLOWED_OPTIONS = PCRE_ANCHORED + PCRE_NOTBOL + PCRE_NOTEOL +
+ PCRE_NOTEMPTY + PCRE_NO_UTF8_CHECK + PCRE_PARTIAL +
+ PCRE_DFA_SHORTEST + PCRE_DFA_RESTART +
+ PCRE_NEWLINE_BITS
+ {$IFDEF PCRE_7_7}
+ + PCRE_BSR_ANYCRLF + PCRE_BSR_UNICODE
+ {$ENDIF}
+ ;
+{$ENDIF}
+
+{ Exec-time and get/set-time error codes }
+ PCRE_ERROR_NOMATCH = -1;
+ PCRE_ERROR_NULL = -2;
+ PCRE_ERROR_BADOPTION = -3;
+ PCRE_ERROR_BADMAGIC = -4;
+ PCRE_ERROR_UNKNOWN_MODE = -5;
+ PCRE_ERROR_NOMEMORY = -6;
+ PCRE_ERROR_NOSUBSTRING = -7;
+{$IFDEF PCRE_5_0}
+ PCRE_ERROR_MATCHLIMIT = -8;
+ PCRE_ERROR_CALLOUT = -9; { Never used by PCRE itself }
+ PCRE_ERROR_BADUTF8 = -10;
+ PCRE_ERROR_BADUTF8_OFFSET = -11;
+ PCRE_ERROR_PARTIAL = -12;
+ PCRE_ERROR_BADPARTIAL = -13;
+ PCRE_ERROR_INTERNAL = -14;
+ PCRE_ERROR_BADCOUNT = -15;
+{$ENDIF}
+{$IFDEF PCRE_7_0}
+ PCRE_ERROR_DFA_UITEM = -16;
+ PCRE_ERROR_DFA_UCOND = -17;
+ PCRE_ERROR_DFA_UMLIMIT = -18;
+ PCRE_ERROR_DFA_WSSIZE = -19;
+ PCRE_ERROR_DFA_RECURSE = -20;
+ PCRE_ERROR_RECURSIONLIMIT = -21;
+ PCRE_ERROR_NULLWSLIMIT = -22;
+ PCRE_ERROR_BADNEWLINE = -23;
+{$ENDIF}
+
+{ Request types for pcre_fullinfo() }
+
+ PCRE_INFO_OPTIONS = 0;
+ PCRE_INFO_SIZE = 1;
+ PCRE_INFO_CAPTURECOUNT = 2;
+ PCRE_INFO_BACKREFMAX = 3;
+ PCRE_INFO_FIRSTBYTE = 4;
+ PCRE_INFO_FIRSTCHAR = 4; { For backwards compatibility }
+ PCRE_INFO_FIRSTTABLE = 5;
+{$IFDEF PCRE_5_0}
+ PCRE_INFO_LASTLITERAL = 6;
+ PCRE_INFO_NAMEENTRYSIZE = 7;
+ PCRE_INFO_NAMECOUNT = 8;
+ PCRE_INFO_NAMETABLE = 9;
+ PCRE_INFO_STUDYSIZE = 10;
+ PCRE_INFO_DEFAULT_TABLES = 11;
+{$ENDIF PCRE_5_0}
+{$IFDEF PCRE_7_7}
+ PCRE_INFO_OKPARTIAL = 12;
+ PCRE_INFO_JCHANGED = 13;
+ PCRE_INFO_HASCRORLF = 14;
+{$ENDIF}
+
+{ Request types for pcre_config() }
+{$IFDEF PCRE_5_0}
+ PCRE_CONFIG_UTF8 = 0;
+ PCRE_CONFIG_NEWLINE = 1;
+ PCRE_CONFIG_LINK_SIZE = 2;
+ PCRE_CONFIG_POSIX_MALLOC_THRESHOLD = 3;
+ PCRE_CONFIG_MATCH_LIMIT = 4;
+ PCRE_CONFIG_STACKRECURSE = 5;
+ PCRE_CONFIG_UNICODE_PROPERTIES = 6;
+{$ENDIF PCRE_5_0}
+{$IFDEF PCRE_7_0}
+ PCRE_CONFIG_MATCH_LIMIT_RECURSION = 7;
+{$ENDIF}
+{$IFDEF PCRE_7_7}
+ PCRE_CONFIG_BSR = 8;
+{$ENDIF}
+
+{ Bit flags for the pcre_extra structure }
+{$IFDEF PCRE_5_0}
+ PCRE_EXTRA_STUDY_DATA = $0001;
+ PCRE_EXTRA_MATCH_LIMIT = $0002;
+ PCRE_EXTRA_CALLOUT_DATA = $0004;
+ PCRE_EXTRA_TABLES = $0008;
+{$ENDIF PCRE_5_0}
+{$IFDEF PCRE_7_0}
+ PCRE_EXTRA_MATCH_LIMIT_RECURSION = $0010;
+{$ENDIF}
+
+Const
+// DefaultOptions : integer = 0;
+ DefaultLocaleTable : pointer = nil;
+
+{$IFDEF PCRE_5_0}
+{ The structure for passing additional data to pcre_exec(). This is defined in
+such as way as to be extensible. Always add new fields at the end, in order to
+remain compatible. }
+
+type ppcre_extra = ^tpcre_extra;
+ tpcre_extra = record
+ flags : longint; { Bits for which fields are set }
+ study_data : pointer; { Opaque data from pcre_study() }
+ match_limit : longint; { Maximum number of calls to match() }
+ callout_data : pointer; { Data passed back in callouts }
+ tables : pointer; { Pointer to character tables }
+ match_limit_recursion: longint; { Max recursive calls to match() }
+ end;
+
+type ppcre_callout_block = ^pcre_callout_block;
+ pcre_callout_block = record
+ version,
+ (* ------------------------ Version 0 ------------------------------- *)
+ callout_number : integer;
+ offset_vector : pointer;
+ subject : pchar;
+ subject_length, start_match, current_position, capture_top,
+ capture_last : integer;
+ callout_data : pointer;
+ (* ------------------- Added for Version 1 -------------------------- *)
+ pattern_position, next_item_length : integer;
+ end;
+{$ENDIF PCRE_5_0}
+
+{$OrgName+}
+{$IFDEF VIRTUALPASCAL} {&Cdecl+} {$ENDIF VIRTUALPASCAL}
+
+ { local replacement of external pcre memory management functions }
+ function pcre_malloc( size : integer ) : pointer;
+ procedure pcre_free( {var} p : pointer );
+{$IFDEF PCRE_5_0}
+ const pcre_stack_malloc: function ( size : integer ): pointer = pcre_malloc;
+ pcre_stack_free: procedure ( {var} p : pointer ) = pcre_free;
+ function pcre_callout(var p : ppcre_callout_block) : integer;
+{$ENDIF PCRE_5_0}
+{$IFDEF VIRTUALPASCAL} {&Cdecl-} {$ENDIF VIRTUALPASCAL}
+
+Implementation
+
+Uses strings, collect, messages, dnapp, commands, advance0, stringsx
+ {$IFDEF VIRTUALPASCAL} ,vpsyslow {$ENDIF VIRTUALPASCAL};
+
+Const
+ MAGIC_NUMBER = $50435245; { 'PCRE' }
+ MAX_MATCHES = 90; { changed in 3.5 version; should be divisible by 3, was 64}
+
+Type
+ PMatchArray = ^TMatchArray;
+ TMatchArray = array[0..( MAX_MATCHES * 3 )] of integer;
+
+ PRegExpCollection = ^TRegExpCollection;
+ TRegExpCollection = object(TSortedCollection)
+ MaxRegExp : integer;
+ SearchRegExp : shortstring;
+ CompareModeInsert : boolean;
+ constructor Init(AMaxRegExp:integer);
+ procedure FreeItem(P: Pointer); virtual;
+ function Compare(P1, P2: Pointer): Integer; virtual;
+ function Find(ARegExp:shortstring;var P: PpcRegExp):boolean; virtual;
+ function CheckNew(ARegExp:shortstring):PpcRegExp;virtual;
+ end;
+
+Var
+ PRegExpCache : PRegExpCollection;
+
+
+{$IFDEF VIRTUALPASCAL} {&Cdecl+} {$ENDIF VIRTUALPASCAL}
+
+ { imported original pcre functions }
+
+ function pcre_compile( const pattern : PChar; options : integer;
+ var errorptr : PChar; var erroroffset : integer;
+ const tables : PChar ) : pointer {pcre}; external;
+{$IFDEF PCRE_7_0}
+ function pcre_compile2( const pattern : PChar; options : integer;
+ var errorcodeptr : Integer;
+ var errorptr : PChar; var erroroffset : integer;
+ const tables : PChar ) : pointer {pcre}; external;
+{$ENDIF}
+{$IFDEF PCRE_5_0}
+ function pcre_config( what : integer; where : pointer) : integer; external;
+ function pcre_copy_named_substring( const code : pointer {pcre};
+ const subject : pchar;
+ var ovector : integer;
+ stringcount : integer;
+ const stringname : pchar;
+ var buffer : pchar;
+ size : integer) : integer; external;
+ function pcre_copy_substring( const subject : pchar; var ovector : integer;
+ stringcount, stringnumber : integer;
+ var buffer : pchar; size : integer )
+ : integer; external;
+ function pcre_exec( const argument_re : pointer {pcre};
+ const extra_data : pointer {pcre_extra};
+{$ELSE}
+ function pcre_exec( const external_re : pointer;
+ const external_extra : pointer;
+{$ENDIF}
+ const subject : PChar;
+ length, start_offset, options : integer;
+ offsets : pointer;
+ offsetcount : integer ) : integer; external;
+{$IFDEF PCRE_7_0}
+ function pcre_dfa_exec( const argument_re : pointer {pcre};
+ const extra_data : pointer {pcre_extra};
+ const subject : pchar;
+ length, start_offset, options : integer;
+ offsets : pointer;
+ offsetcount : integer;
+ workspace : pointer;
+ wscount : integer ) : integer; external;
+{$ENDIF}
+{$IFDEF PCRE_5_0}
+ procedure pcre_free_substring( const p : pchar ); external;
+ procedure pcre_free_substring_list( var p : pchar ); external;
+ function pcre_fullinfo( const argument_re : pointer {pcre};
+ const extra_data : pointer {pcre_extra};
+ what : integer;
+ where : pointer ) : integer; external;
+ function pcre_get_named_substring( const code : pointer {pcre};
+ const subject : pchar;
+ var ovector : integer;
+ stringcount : integer;
+ const stringname : pchar;
+ var stringptr : pchar ) : integer; external;
+ function pcre_get_stringnumber( const code : pointer {pcre};
+ const stringname : pchar ) : integer; external;
+ function pcre_get_stringtable_entries( const code : pointer {pcre};
+ const stringname : pchar;
+ var firstptr,
+ lastptr : pchar ) : integer; external;
+ function pcre_get_substring( const subject : pchar; var ovector : integer;
+ stringcount, stringnumber : integer;
+ var stringptr : pchar ) : integer; external;
+ function pcre_get_substring_list( const subject : pchar; var ovector : integer;
+ stringcount : integer;
+ listptr : pointer {const char ***listptr}) : integer; external;
+ function pcre_info( const argument_re : pointer {pcre};
+ var optptr : integer;
+ var first_byte : integer ) : integer; external;
+ function pcre_maketables : pchar; external;
+{$ENDIF}
+{$IFDEF PCRE_7_0}
+ function pcre_refcount( const argument_re : pointer {pcre};
+ adjust : integer ) : pchar; external;
+{$ENDIF}
+ function pcre_study( const external_re : pointer {pcre};
+ options : integer;
+ var errorptr : PChar ) : pointer {pcre_extra}; external;
+{$IFDEF PCRE_5_0}
+ function pcre_version : pchar; external;
+{$ENDIF}
+
+ function pcre_malloc( size : integer ) : pointer;
+ begin
+ GetMem( result, size );
+ end;
+
+ procedure pcre_free( {var} p : pointer );
+ begin
+ if (p <> nil) then
+ FreeMem( p, 0 );
+ {@p := nil;}
+ end;
+
+{$IFDEF PCRE_5_0}
+(* Called from PCRE as a result of the (?C) item. We print out where we are in
+the match. Yield zero unless more callouts than the fail count, or the callout
+data is not zero. *)
+
+ function pcre_callout;
+ begin
+ end;
+{$ENDIF}
+
+{$IFDEF VIRTUALPASCAL} {&Cdecl-} {$ENDIF VIRTUALPASCAL}
+
+// Always include the newest version of the library
+{$IFDEF PCRE_7_7}
+ {$L pcre77.lib}
+{$ELSE}
+ {$IFDEF PCRE_7_0}
+ {$L pcre70.lib}
+ {$ELSE}
+ {$IFDEF PCRE_5_0}
+ {$L pcre50.lib}
+ {$ELSE}
+ {$IFDEF PCRE_3_7}
+ {$L pcre37.lib}
+ {$ENDIF PCRE_3_7}
+ {$ENDIF PCRE_5_0}
+ {$ENDIF PCRE_7_0}
+{$ENDIF PCRE_7_7}
+
+{TpcRegExp}
+
+ constructor TpcRegExp.Init(const ARegExp:shortstring; AOptions:integer; ALocale : Pointer);
+ var
+ pRegExp : PChar;
+ begin
+ RegExp:=ARegExp;
+ RegExpC:=nil;
+ RegExpExt:=nil;
+ Matches:=nil;
+ MatchesCount:=0;
+ Error:=true;
+ ErrorMsg:=nil;
+ ErrorPos:=0;
+ RunTimeOptions := 0;
+ if length(RegExp) < 255 then
+ begin
+ RegExp[length(RegExp)+1]:=#0;
+ pRegExp:=@RegExp[1];
+ end
+ else
+ begin
+ GetMem(pRegExp,length(RegExp)+1);
+ pRegExp:=strpcopy(pRegExp,RegExp);
+ end;
+ RegExpC := pcre_compile( pRegExp,
+ AOptions and PCRE_COMPILE_ALLOWED_OPTIONS,
+ ErrorMsg, ErrorPos, ALocale);
+ if length(RegExp) = 255 then
+ StrDispose(pRegExp);
+ if RegExpC = nil then
+ exit;
+ ErrorMsg:=nil;
+ RegExpExt := pcre_study( RegExpC, 0, ErrorMsg );
+ if (RegExpExt = nil) and (ErrorMsg <> nil) then
+ begin
+ pcre_free(RegExpC);
+ exit;
+ end;
+ GetMem(Matches,SizeOf(TMatchArray));
+ Error:=false;
+ end;
+
+ destructor TpcRegExp.Done;
+ begin
+ if RegExpC <> nil then
+ pcre_free(RegExpC);
+ if RegExpExt <> nil then
+ pcre_free(RegExpExt);
+ if Matches <> nil then
+ FreeMem(Matches,SizeOf(TMatchArray));
+ end;
+
+ function TpcRegExp.SearchNext( AStr: Pchar; ALen : longint ) : boolean;
+ var Options: Integer;
+ begin // must handle PCRE_ERROR_PARTIAL here
+ Options := (RunTimeOptions or startup.MiscMultiData.cfgRegEx.DefaultOptions) and
+ PCRE_EXEC_ALLOWED_OPTIONS;
+ if MatchesCount > 0 then
+ MatchesCount:=pcre_exec( RegExpC, RegExpExt, AStr, ALen, PMatchArray(Matches)^[1],
+ Options, Matches, MAX_MATCHES ) else
+ MatchesCount:=pcre_exec( RegExpC, RegExpExt, AStr, ALen, 0,
+ Options, Matches, MAX_MATCHES );
+{ if MatchesCount = 0 then
+ MatchesCount := MatchesCount div 3;}
+ PartialMatch := MatchesCount = PCRE_ERROR_PARTIAL;
+ SearchNext := MatchesCount > 0;
+ end;
+
+ function TpcRegExp.Search( AStr: Pchar; ALen : longint):boolean;
+ begin
+ MatchesCount:=0;
+ Search:=SearchNext(AStr,ALen);
+ SourceLen:=ALen;
+ end;
+
+ function TpcRegExp.SearchOfs( AStr: Pchar; ALen, AOfs: longint ) : boolean;
+ var Options: Integer;
+ begin
+ MatchesCount:=0;
+ Options := (RunTimeOptions or startup.MiscMultiData.cfgRegEx.DefaultOptions) and
+ PCRE_EXEC_ALLOWED_OPTIONS;
+ MatchesCount:=pcre_exec( RegExpC, RegExpExt, AStr, ALen, AOfs,
+ Options, Matches, MAX_MATCHES );
+ PartialMatch := MatchesCount = PCRE_ERROR_PARTIAL;
+ SearchOfs := MatchesCount > 0;
+ SourceLen := ALen-AOfs;
+ end;
+
+ function TpcRegExp.MatchSub(ANom:integer; var Pos,Len:longint):boolean;
+ begin
+ if (MatchesCount > 0) and (ANom <= (MatchesCount-1)) then
+ begin
+ ANom:=ANom*2;
+ Pos:=PMatchArray(Matches)^[ANom];
+ Len:=PMatchArray(Matches)^[ANom+1]-Pos;
+ MatchSub:=true;
+ end
+ else
+ MatchSub:=false;
+ end;
+
+ function TpcRegExp.MatchFull(var Pos,Len:longint):boolean;
+ begin
+ MatchFull:=MatchSub(0,Pos,Len);
+ end;
+
+ function TpcRegExp.GetSubStr(ANom: integer; AStr: Pchar):string;
+ var
+ s: ansistring;
+ pos,len: longint;
+ begin
+ s:='';
+ if MatchSub(ANom, pos, len) then
+ begin
+ setlength(s, len);
+ Move(AStr[pos], s[1], len);
+ end;
+ GetSubStr:=s;
+ end;
+
+ function TpcRegExp.GetPreSubStr(AStr: Pchar):string;
+ var
+ s: ansistring;
+ l: longint;
+ begin
+ s:='';
+ if (MatchesCount > 0) then
+ begin
+ l:=PMatchArray(Matches)^[0]-1;
+ if l > 0 then
+ begin
+ setlength(s,l);
+ Move(AStr[1],s[1],l);
+ end;
+ end;
+ GetPreSubStr:=s;
+ end;
+
+ function TpcRegExp.GetPostSubStr(AStr: Pchar):string;
+ var
+ s: ansistring;
+ l: longint;
+ ANom: integer;
+ begin
+ s:='';
+ if (MatchesCount > 0) then
+ begin
+ ANom:=(MatchesCount-1){*2} shl 1;
+ l:=SourceLen-PMatchArray(Matches)^[ANom+1]+1;
+ if l > 0 then
+ begin
+ setlength(s,l);
+ Move(AStr[PMatchArray(Matches)^[ANom+1]],s[1],l);
+ end;
+ end;
+ GetPostSubStr:=s;
+ end;
+
+
+ function TpcRegExp.GetFullStr(AStr: Pchar):string;
+ var
+ s: ansistring;
+ l: longint;
+ begin
+ GetFullStr:=GetSubStr(0,AStr);
+ end;
+
+ function TpcRegExp.GetReplStr(AStr: Pchar; const ARepl: string):string;
+ var
+ s: ansistring;
+ l,i,lasti: longint;
+ begin
+ l:=length(ARepl);
+ i:=1;
+ lasti:=1;
+ s:='';
+ while i <= l do
+ begin
+ case ARepl[i] of
+ '\' :
+ begin
+ if i < l then
+ begin
+ s:=s+copy(ARepl,lasti,i-lasti){+ARepl[i+1]};
+ {AH 17-10-05 support for POSIX \1-\9 backreferences}
+ case ARepl[i+1] of
+ '0' : s:=s+GetFullStr(AStr);
+ '1'..'9' : s:=s+GetSubStr(ord(ARepl[i+1])-ord('0'),AStr);
+ else s:=s+ARepl[i+1]; // copy the escaped character
+ end;
+ end;
+ inc(i);
+ lasti:=i+1;
+ end;
+ '$' :
+ begin
+ if i < l then
+ begin
+ s:=s+copy(ARepl,lasti,i-lasti);
+ case ARepl[i+1] of
+ '&' : s:=s+GetFullStr(AStr);
+ '1'..'9' : s:=s+GetSubStr(ord(ARepl[i+1])-ord('0'),AStr);
+ '`' : s:=s+GetPreSubStr(AStr);
+ #39 : s:=s+GetPostSubStr(AStr);
+ end;
+ end;
+ inc(i);
+ lasti:=i+1;
+ end;
+ end;
+ inc(i);
+ end;
+ if lasti <= {AH 25-10-2004 added =, else l==1 won't work} l then
+ s:=s+copy(ARepl,lasti,l-lasti+1);
+ GetReplStr:=s;
+ end;
+
+ function TpcRegExp.ErrorStr:string;
+ begin
+ ErrorStr:=StrPas(ErrorMsg);
+ end;
+
+{TRegExpCollection}
+
+constructor TRegExpCollection.Init(AMaxRegExp: integer);
+begin
+ Inherited Init(1,1);
+ MaxRegExp:=AMaxRegExp;
+ CompareModeInsert:=true;
+end;
+
+procedure TRegExpCollection.FreeItem(P: Pointer);
+begin
+ if P <> nil then
+ begin
+ Dispose(PpcRegExp(P),Done);
+ end;
+end;
+
+function TRegExpCollection.Compare(P1, P2: Pointer): Integer;
+//var
+// l,l1,l2,i : byte;
+//// wPos: pchar;
+begin
+ if CompareModeInsert then
+ begin
+// l1:=length(PpcRegExp(P1)^.RegExp);
+// l2:=length(PpcRegExp(P2)^.RegExp);
+// if l1 > l2 then l:=l2 else
+// l:=l1;
+// for i:=1 to l do
+// if PpcRegExp(P1).RegExp[i] <> PpcRegExp(P2).RegExp[i] then break;
+// if i <=l then
+// Compare:=ord(PpcRegExp(P1).RegExp[i])-ord(PpcRegExp(P2).RegExp[i]) else
+// Compare:=l1-l2;
+ Compare := stringsx.PasStrCmp(PpcRegExp(P1).RegExp, PpcRegExp(P2).RegExp, False);
+ end
+ else
+ begin
+// l1:=length(PpcRegExp(P1)^.RegExp);
+// l2:=length(SearchRegExp);
+// if l1 > l2 then l:=l2 else
+// l:=l1;
+// for i:=1 to l do
+// if PpcRegExp(P1).RegExp[i] <> SearchRegExp[i] then
+// begin
+// Compare:=ord(PpcRegExp(P1).RegExp[i])-ord(SearchRegExp[i]);
+// break;
+// end;
+// if i > l then Compare:=l1-l2;
+ Compare := stringsx.PasStrCmp(PpcRegExp(P1).RegExp, SearchRegExp, False);
+ end;
+end;
+
+function TRegExpCollection.Find(ARegExp:shortstring;var P: PpcRegExp):boolean;
+var I : integer;
+begin
+ CompareModeInsert:=false;
+ SearchRegExp:=ARegExp;
+ if Search(nil,I) then
+ begin
+ P:=PpcRegExp(At(I));
+ Find:=true;
+ end
+ else
+ begin
+ P:=nil;
+ Find:=false;
+ end;
+ CompareModeInsert:=true;
+end;
+
+function TRegExpCollection.CheckNew(ARegExp:shortstring):PpcRegExp;
+var
+ P : PpcRegExp;
+begin
+ if not Find(ARegExp,P) then
+ begin
+ if Count = MaxRegExp then
+ AtFree(0);
+ P:=New(ppcRegExp,Init(ARegExp,PCRE_CASELESS,nil));
+ Insert(P);
+ end;
+ CheckNew:=P;
+end;
+
+function pcGrepMatch(WildCard, aStr: string; AOptions:integer; ALocale : Pointer): Boolean;
+var
+ PpcRE:PpcRegExp;
+begin
+ PpcRE:=New(ppcRegExp,Init(WildCard,AOptions,Alocale));
+ pcGrepMatch:=PpcRE^.Search(pchar(AStr),Length(AStr));
+ Dispose(PpcRE,Done);
+end;
+
+function pcGrepSub(WildCard, aStr, aRepl: string; AOptions:integer; ALocale : Pointer): string;
+var
+ PpcRE:PpcRegExp;
+begin
+ PpcRE:=New(ppcRegExp,Init(WildCard,AOptions,Alocale));
+ if PpcRE^.Search(pchar(AStr),Length(AStr)) then
+ pcGrepSub:=PpcRE^.GetReplStr(pchar(AStr),ARepl)
+ else
+ pcGrepSub:='';
+ Dispose(PpcRE,Done);
+end;
+
+function pcFastGrepMatch(WildCard, aStr: string): Boolean;
+var
+ PpcRE:PpcRegExp;
+begin
+ PpcRE:=PRegExpCache^.CheckNew(WildCard);
+ pcFastGrepMatch:=PpcRE^.Search(pchar(AStr),Length(AStr));
+end;
+
+function pcFastGrepSub(WildCard, aStr, aRepl: string): string;
+var
+ PpcRE:PpcRegExp;
+begin
+ PpcRE:=PRegExpCache^.CheckNew(WildCard);
+ if PpcRE^.Search(pchar(AStr),Length(AStr)) then
+ pcFastGrepSub:=PpcRE^.GetReplStr(pchar(AStr),ARepl)
+ else
+ pcFastGrepSub:='';
+end;
+
+{$IFDEF PCRE_5_0}
+function pcGetVersion : pchar; assembler; {$FRAME-}{$USES none}
+asm
+ call pcre_version
+end;
+{$ENDIF PCRE_5_0}
+
+function pcError;
+var P: ppcRegExp absolute pRegExp;
+begin
+ Result := (P = nil) or P^.Error;
+ If Result and (P <> nil) then
+ begin
+{ if P^.ErrorPos = 0 then
+ MessageBox(GetString(erRegExpCompile)+'"'+P^.ErrorStr+'"', nil,mfConfirmation+mfOkButton)
+ else}
+ MessageBox(GetString(erRegExpCompile)+'"'+P^.ErrorStr+'"'+GetString(erRegExpCompPos),
+ @P^.ErrorPos,mfConfirmation+mfOkButton);
+ Dispose(P, Done);
+ P:=nil;
+ end;
+end;
+
+function pcInit;
+var Options : Integer;
+begin
+ If CaseSens then Options := 0 else Options := PCRE_CASELESS;
+ Result := New( PpcRegExp, Init( Pattern,
+ {DefaultOptions}
+ startup.MiscMultiData.cfgRegEx.DefaultOptions or Options,
+ DefaultLocaleTable) );
+end;
+
+Initialization
+ PRegExpCache:=New(PRegExpCollection,Init(64));
+Finalization
+ Dispose(PRegExpCache,Done);
+End.
diff --git a/dist/pcregrep.c b/dist/pcregrep.c
index 4f7fa38..c49a74f 100644
--- a/dist/pcregrep.c
+++ b/dist/pcregrep.c
@@ -1582,12 +1582,15 @@
int endlinelength;
int mrc = 0;
int startoffset = 0;
+ int prevoffsets[2];
unsigned int options = 0;
BOOL match;
char *matchptr = ptr;
char *t = ptr;
size_t length, linelength;
+ prevoffsets[0] = prevoffsets[1] = -1;
+
/* At this point, ptr is at the start of a line. We need to find the length
of the subject string to pass to pcre_exec(). In multiline mode, it is the
length remainder of the data in the buffer. Otherwise, it is the length of
@@ -1729,55 +1732,86 @@
{
if (!invert)
{
- if (printname != NULL) fprintf(stdout, "%s:", printname);
- if (number) fprintf(stdout, "%d:", linenumber);
+ int oldstartoffset = startoffset;
- /* Handle --line-offsets */
+ /* It is possible, when a lookbehind assertion contains \K, for the
+ same string to be found again. The code below advances startoffset, but
+ until it is past the "bumpalong" offset that gave the match, the same
+ substring will be returned. The PCRE1 library does not return the
+ bumpalong offset, so all we can do is ignore repeated strings. (PCRE2
+ does this better.) */
- if (line_offsets)
- fprintf(stdout, "%d,%d\n", (int)(matchptr + offsets[0] - ptr),
- offsets[1] - offsets[0]);
-
- /* Handle --file-offsets */
-
- else if (file_offsets)
- fprintf(stdout, "%d,%d\n",
- (int)(filepos + matchptr + offsets[0] - ptr),
- offsets[1] - offsets[0]);
-
- /* Handle --only-matching, which may occur many times */
-
- else
+ if (prevoffsets[0] != offsets[0] || prevoffsets[1] != offsets[1])
{
- BOOL printed = FALSE;
- omstr *om;
+ prevoffsets[0] = offsets[0];
+ prevoffsets[1] = offsets[1];
- for (om = only_matching; om != NULL; om = om->next)
+ if (printname != NULL) fprintf(stdout, "%s:", printname);
+ if (number) fprintf(stdout, "%d:", linenumber);
+
+ /* Handle --line-offsets */
+
+ if (line_offsets)
+ fprintf(stdout, "%d,%d\n", (int)(matchptr + offsets[0] - ptr),
+ offsets[1] - offsets[0]);
+
+ /* Handle --file-offsets */
+
+ else if (file_offsets)
+ fprintf(stdout, "%d,%d\n",
+ (int)(filepos + matchptr + offsets[0] - ptr),
+ offsets[1] - offsets[0]);
+
+ /* Handle --only-matching, which may occur many times */
+
+ else
{
- int n = om->groupnum;
- if (n < mrc)
+ BOOL printed = FALSE;
+ omstr *om;
+
+ for (om = only_matching; om != NULL; om = om->next)
{
- int plen = offsets[2*n + 1] - offsets[2*n];
- if (plen > 0)
+ int n = om->groupnum;
+ if (n < mrc)
{
- if (printed) fprintf(stdout, "%s", om_separator);
- if (do_colour) fprintf(stdout, "%c[%sm", 0x1b, colour_string);
- FWRITE(matchptr + offsets[n*2], 1, plen, stdout);
- if (do_colour) fprintf(stdout, "%c[00m", 0x1b);
- printed = TRUE;
+ int plen = offsets[2*n + 1] - offsets[2*n];
+ if (plen > 0)
+ {
+ if (printed) fprintf(stdout, "%s", om_separator);
+ if (do_colour) fprintf(stdout, "%c[%sm", 0x1b, colour_string);
+ FWRITE(matchptr + offsets[n*2], 1, plen, stdout);
+ if (do_colour) fprintf(stdout, "%c[00m", 0x1b);
+ printed = TRUE;
+ }
}
}
- }
- if (printed || printname != NULL || number) fprintf(stdout, "\n");
+ if (printed || printname != NULL || number) fprintf(stdout, "\n");
+ }
}
- /* Prepare to repeat to find the next match */
+ /* Prepare to repeat to find the next match. If the patterned contained
+ a lookbehind tht included \K, it is possible that the end of the match
+ might be at or before the actual strting offset we have just used. We
+ need to start one character further on. Unfortunately, for unanchored
+ patterns, the actual start offset can be greater that the one that was
+ set as a result of "bumpalong". PCRE1 does not return the actual start
+ offset, so we have to check against the original start offset. This may
+ lead to duplicates - we we need the fudge above to avoid printing them.
+ (PCRE2 does this better.) */
match = FALSE;
if (line_buffered) fflush(stdout);
rc = 0; /* Had some success */
startoffset = offsets[1]; /* Restart after the match */
+ if (startoffset <= oldstartoffset)
+ {
+ if ((size_t)startoffset >= length)
+ goto END_ONE_MATCH; /* We were at the end */
+ startoffset = oldstartoffset + 1;
+ if (utf8)
+ while ((matchptr[startoffset] & 0xc0) == 0x80) startoffset++;
+ }
goto ONLY_MATCHING_RESTART;
}
}
@@ -1974,6 +2008,7 @@
/* Advance to after the newline and increment the line number. The file
offset to the current line is maintained in filepos. */
+ END_ONE_MATCH:
ptr += linelength + endlinelength;
filepos += (int)(linelength + endlinelength);
linenumber++;
diff --git a/dist/pcretest.c b/dist/pcretest.c
index b8dc3c6..27107ca 100644
--- a/dist/pcretest.c
+++ b/dist/pcretest.c
@@ -2257,16 +2257,19 @@
fprintf(f, "Callout %d: last capture = %d\n",
cb->callout_number, cb->capture_last);
- for (i = 0; i < cb->capture_top * 2; i += 2)
+ if (cb->offset_vector != NULL)
{
- if (cb->offset_vector[i] < 0)
- fprintf(f, "%2d: <unset>\n", i/2);
- else
+ for (i = 0; i < cb->capture_top * 2; i += 2)
{
- fprintf(f, "%2d: ", i/2);
- PCHARSV(cb->subject, cb->offset_vector[i],
- cb->offset_vector[i+1] - cb->offset_vector[i], f);
- fprintf(f, "\n");
+ if (cb->offset_vector[i] < 0)
+ fprintf(f, "%2d: <unset>\n", i/2);
+ else
+ {
+ fprintf(f, "%2d: ", i/2);
+ PCHARSV(cb->subject, cb->offset_vector[i],
+ cb->offset_vector[i+1] - cb->offset_vector[i], f);
+ fprintf(f, "\n");
+ }
}
}
}
@@ -2519,7 +2522,7 @@
re->name_count = swap_uint16(re->name_count);
re->ref_count = swap_uint16(re->ref_count);
-if (extra != NULL)
+if (extra != NULL && (extra->flags & PCRE_EXTRA_STUDY_DATA) != 0)
{
pcre_study_data *rsd = (pcre_study_data *)(extra->study_data);
rsd->size = swap_uint32(rsd->size);
@@ -2700,7 +2703,7 @@
re->name_count = swap_uint16(re->name_count);
re->ref_count = swap_uint16(re->ref_count);
-if (extra != NULL)
+if (extra != NULL && (extra->flags & PCRE_EXTRA_STUDY_DATA) != 0)
{
pcre_study_data *rsd = (pcre_study_data *)(extra->study_data);
rsd->size = swap_uint32(rsd->size);
@@ -3453,7 +3456,7 @@
pcre_extra *extra = NULL;
#if !defined NOPOSIX /* There are still compilers that require no indent */
- regex_t preg;
+ regex_t preg = { NULL, 0, 0} ;
int do_posix = 0;
#endif
@@ -5603,6 +5606,12 @@
if (!do_g && !do_G) break;
+ if (use_offsets == NULL)
+ {
+ fprintf(outfile, "Cannot do global matching without an ovector\n");
+ break;
+ }
+
/* If we have matched an empty string, first check to see if we are at
the end of the subject. If so, the /g loop is over. Otherwise, mimic what
Perl's /g options does. This turns out to be rather cunning. First we set
@@ -5618,9 +5627,33 @@
g_notempty = PCRE_NOTEMPTY_ATSTART | PCRE_ANCHORED;
}
- /* For /g, update the start offset, leaving the rest alone */
+ /* For /g, update the start offset, leaving the rest alone. There is a
+ tricky case when \K is used in a positive lookbehind assertion. This can
+ cause the end of the match to be less than or equal to the start offset.
+ In this case we restart at one past the start offset. This may return the
+ same match if the original start offset was bumped along during the
+ match, but eventually the new start offset will hit the actual start
+ offset. (In PCRE2 the true start offset is available, and this can be
+ done better. It is not worth doing more than making sure we do not loop
+ at this stage in the life of PCRE1.) */
- if (do_g) start_offset = use_offsets[1];
+ if (do_g)
+ {
+ if (g_notempty == 0 && use_offsets[1] <= start_offset)
+ {
+ if (start_offset >= len) break; /* End of subject */
+ start_offset++;
+ if (use_utf)
+ {
+ while (start_offset < len)
+ {
+ if ((bptr[start_offset] & 0xc0) != 0x80) break;
+ start_offset++;
+ }
+ }
+ }
+ else start_offset = use_offsets[1];
+ }
/* For /G, update the pointer and length */
@@ -5637,7 +5670,7 @@
CONTINUE:
#if !defined NOPOSIX
- if (posix || do_posix) regfree(&preg);
+ if ((posix || do_posix) && preg.re_pcre != 0) regfree(&preg);
#endif
if (re != NULL) new_free(re);
diff --git a/dist/sljit/sljitConfig.h b/dist/sljit/sljitConfig.h
index 4d93f4f..10364c3 100644
--- a/dist/sljit/sljitConfig.h
+++ b/dist/sljit/sljitConfig.h
@@ -96,13 +96,19 @@
#define SLJIT_EXECUTABLE_ALLOCATOR 1
#endif
+/* Return with error when an invalid argument is passed. */
+#ifndef SLJIT_ARGUMENT_CHECKS
+/* Disabled by default */
+#define SLJIT_ARGUMENT_CHECKS 0
+#endif
+
/* Debug checks (assertions, etc.). */
#ifndef SLJIT_DEBUG
/* Enabled by default */
#define SLJIT_DEBUG 1
#endif
-/* Verbose operations */
+/* Verbose operations. */
#ifndef SLJIT_VERBOSE
/* Enabled by default */
#define SLJIT_VERBOSE 1
diff --git a/dist/sljit/sljitConfigInternal.h b/dist/sljit/sljitConfigInternal.h
index 6351e5b..3284012 100644
--- a/dist/sljit/sljitConfigInternal.h
+++ b/dist/sljit/sljitConfigInternal.h
@@ -60,6 +60,7 @@
a double precision floating point array by index
SLJIT_SINGLE_SHIFT : the shift required to apply when accessing
a single precision floating point array by index
+ SLJIT_LOCALS_OFFSET : local space starting offset (SLJIT_SP + SLJIT_LOCALS_OFFSET)
SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address
Other macros:
@@ -67,6 +68,10 @@
SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper)
*/
+/*****************/
+/* Sanity check. */
+/*****************/
+
#if !((defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
|| (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
|| (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
@@ -84,7 +89,6 @@
#error "An architecture must be selected"
#endif
-/* Sanity check. */
#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
+ (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
+ (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
@@ -102,7 +106,10 @@
#error "Multiple architectures are selected"
#endif
-/* Auto select option (requires compiler support) */
+/********************************************************/
+/* Automatic CPU detection (requires compiler support). */
+/********************************************************/
+
#if (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO)
#ifndef _WIN32
@@ -155,6 +162,10 @@
#undef SLJIT_EXECUTABLE_ALLOCATOR
#endif
+/******************************/
+/* CPU family type detection. */
+/******************************/
+
#if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
#define SLJIT_CONFIG_ARM_32 1
@@ -172,52 +183,9 @@
#define SLJIT_CONFIG_SPARC 1
#endif
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-#define SLJIT_NUMBER_OF_REGISTERS 10
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 7
-#elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
-#ifndef _WIN64
-#define SLJIT_NUMBER_OF_REGISTERS 12
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 6
-#else
-#define SLJIT_NUMBER_OF_REGISTERS 12
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
-#endif /* _WIN64 */
-#elif (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7)
-#define SLJIT_NUMBER_OF_REGISTERS 11
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
-#elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
-#define SLJIT_NUMBER_OF_REGISTERS 11
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 7
-#elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
-#define SLJIT_NUMBER_OF_REGISTERS 23
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 10
-#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC)
-#define SLJIT_NUMBER_OF_REGISTERS 22
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 17
-#elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS)
-#define SLJIT_NUMBER_OF_REGISTERS 17
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
-#elif (defined SLJIT_CONFIG_SPARC && SLJIT_CONFIG_SPARC)
-#define SLJIT_NUMBER_OF_REGISTERS 18
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 14
-#elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
-#define SLJIT_NUMBER_OF_REGISTERS 0
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 0
-#endif
-
-#define SLJIT_NUMBER_OF_SCRATCH_REGISTERS \
- (SLJIT_NUMBER_OF_REGISTERS - SLJIT_NUMBER_OF_SAVED_REGISTERS)
-
-#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 6
-#if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && (defined _WIN64)
-#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 1
-#else
-#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0
-#endif
-
-#define SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS \
- (SLJIT_NUMBER_OF_FLOAT_REGISTERS - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS)
+/**********************************/
+/* External function definitions. */
+/**********************************/
#if !(defined SLJIT_STD_MACROS_DEFINED && SLJIT_STD_MACROS_DEFINED)
@@ -225,20 +193,21 @@
#include <stdlib.h>
#include <string.h>
-#endif /* STD_MACROS_DEFINED */
+#endif /* SLJIT_STD_MACROS_DEFINED */
/* General macros:
Note: SLJIT is designed to be independent from them as possible.
- In release mode (SLJIT_DEBUG is not defined) only the following macros are needed:
+ In release mode (SLJIT_DEBUG is not defined) only the following
+ external functions are needed:
*/
#ifndef SLJIT_MALLOC
-#define SLJIT_MALLOC(size) malloc(size)
+#define SLJIT_MALLOC(size, allocator_data) malloc(size)
#endif
#ifndef SLJIT_FREE
-#define SLJIT_FREE(ptr) free(ptr)
+#define SLJIT_FREE(ptr, allocator_data) free(ptr)
#endif
#ifndef SLJIT_MEMMOVE
@@ -249,6 +218,10 @@
#define SLJIT_ZEROMEM(dest, len) memset(dest, 0, len)
#endif
+/***************************/
+/* Compiler helper macros. */
+/***************************/
+
#if !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY)
#if defined(__GNUC__) && (__GNUC__ >= 3)
@@ -270,6 +243,15 @@
#endif
#endif /* !SLJIT_INLINE */
+#ifndef SLJIT_NOINLINE
+/* Not inline functions. */
+#if defined(__GNUC__)
+#define SLJIT_NOINLINE __attribute__ ((noinline))
+#else
+#define SLJIT_NOINLINE
+#endif
+#endif /* !SLJIT_INLINE */
+
#ifndef SLJIT_CONST
/* Const variables. */
#define SLJIT_CONST const
@@ -280,6 +262,10 @@
#define SLJIT_UNUSED_ARG(arg) (void)arg
#endif
+/*********************************/
+/* Type of public API functions. */
+/*********************************/
+
#if (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC)
/* Static ABI functions. For all-in-one programs. */
@@ -294,6 +280,10 @@
#define SLJIT_API_FUNC_ATTRIBUTE
#endif /* (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) */
+/****************************/
+/* Instruction cache flush. */
+/****************************/
+
#ifndef SLJIT_CACHE_FLUSH
#if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86)
@@ -339,6 +329,10 @@
#endif /* !SLJIT_CACHE_FLUSH */
+/******************************************************/
+/* Byte/half/int/word/single/double type definitions. */
+/******************************************************/
+
/* 8 bit byte type. */
typedef unsigned char sljit_ub;
typedef signed char sljit_sb;
@@ -351,7 +345,7 @@
typedef unsigned int sljit_ui;
typedef signed int sljit_si;
-/* Machine word type. Can encapsulate a pointer.
+/* Machine word type. Enough for storing a pointer.
32 bit for 32 bit machines.
64 bit for 64 bit machines. */
#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
@@ -404,44 +398,13 @@
#endif /* !SLJIT_W */
-#ifndef SLJIT_CALL
-
-/* ABI (Application Binary Interface) types. */
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-
-#if defined(__GNUC__) && !defined(__APPLE__)
-
-#define SLJIT_CALL __attribute__ ((fastcall))
-#define SLJIT_X86_32_FASTCALL 1
-
-#elif defined(_MSC_VER)
-
-#define SLJIT_CALL __fastcall
-#define SLJIT_X86_32_FASTCALL 1
-
-#elif defined(__BORLANDC__)
-
-#define SLJIT_CALL __msfastcall
-#define SLJIT_X86_32_FASTCALL 1
-
-#else /* Unknown compiler. */
-
-/* The cdecl attribute is the default. */
-#define SLJIT_CALL
-
-#endif
-
-#else /* Non x86-32 architectures. */
-
-#define SLJIT_CALL
-
-#endif /* SLJIT_CONFIG_X86_32 */
-
-#endif /* !SLJIT_CALL */
+/*************************/
+/* Endianness detection. */
+/*************************/
#if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN)
-/* These macros are useful for the applications. */
+/* These macros are mostly useful for the applications. */
#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
@@ -479,29 +442,6 @@
#error "Exactly one endianness must be selected"
#endif
-#ifndef SLJIT_INDIRECT_CALL
-#if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN)) \
- || ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX)
-/* It seems certain ppc compilers use an indirect addressing for functions
- which makes things complicated. */
-#define SLJIT_INDIRECT_CALL 1
-#endif
-#endif /* SLJIT_INDIRECT_CALL */
-
-#ifndef SLJIT_RETURN_ADDRESS_OFFSET
-#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-#define SLJIT_RETURN_ADDRESS_OFFSET 8
-#else
-#define SLJIT_RETURN_ADDRESS_OFFSET 0
-#endif
-#endif /* SLJIT_RETURN_ADDRESS_OFFSET */
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-/* Auto detect SSE2 support using CPUID.
- On 64 bit x86 cpus, sse2 must be present. */
-#define SLJIT_DETECT_SSE2 1
-#endif
-
#ifndef SLJIT_UNALIGNED
#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
@@ -516,6 +456,73 @@
#endif /* !SLJIT_UNALIGNED */
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+/* Auto detect SSE2 support using CPUID.
+ On 64 bit x86 cpus, sse2 must be present. */
+#define SLJIT_DETECT_SSE2 1
+#endif
+
+/*****************************************************************************************/
+/* Calling convention of functions generated by SLJIT or called from the generated code. */
+/*****************************************************************************************/
+
+#ifndef SLJIT_CALL
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+
+#if defined(__GNUC__) && !defined(__APPLE__)
+
+#define SLJIT_CALL __attribute__ ((fastcall))
+#define SLJIT_X86_32_FASTCALL 1
+
+#elif defined(_MSC_VER)
+
+#define SLJIT_CALL __fastcall
+#define SLJIT_X86_32_FASTCALL 1
+
+#elif defined(__BORLANDC__)
+
+#define SLJIT_CALL __msfastcall
+#define SLJIT_X86_32_FASTCALL 1
+
+#else /* Unknown compiler. */
+
+/* The cdecl attribute is the default. */
+#define SLJIT_CALL
+
+#endif
+
+#else /* Non x86-32 architectures. */
+
+#define SLJIT_CALL
+
+#endif /* SLJIT_CONFIG_X86_32 */
+
+#endif /* !SLJIT_CALL */
+
+#ifndef SLJIT_INDIRECT_CALL
+#if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN)) \
+ || ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX)
+/* It seems certain ppc compilers use an indirect addressing for functions
+ which makes things complicated. */
+#define SLJIT_INDIRECT_CALL 1
+#endif
+#endif /* SLJIT_INDIRECT_CALL */
+
+/* The offset which needs to be substracted from the return address to
+determine the next executed instruction after return. */
+#ifndef SLJIT_RETURN_ADDRESS_OFFSET
+#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
+#define SLJIT_RETURN_ADDRESS_OFFSET 8
+#else
+#define SLJIT_RETURN_ADDRESS_OFFSET 0
+#endif
+#endif /* SLJIT_RETURN_ADDRESS_OFFSET */
+
+/***************************************************/
+/* Functions of the built-in executable allocator. */
+/***************************************************/
+
#if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR)
SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size);
SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr);
@@ -524,6 +531,110 @@
#define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr)
#endif
+/**********************************************/
+/* Registers and locals offset determination. */
+/**********************************************/
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+
+#define SLJIT_NUMBER_OF_REGISTERS 10
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 7
+#if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL)
+#define SLJIT_LOCALS_OFFSET_BASE ((2 + 4) * sizeof(sljit_sw))
+#else
+/* Maximum 3 arguments are passed on the stack, +1 for double alignment. */
+#define SLJIT_LOCALS_OFFSET_BASE ((3 + 1 + 4) * sizeof(sljit_sw))
+#endif /* SLJIT_X86_32_FASTCALL */
+
+#elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
+
+#ifndef _WIN64
+#define SLJIT_NUMBER_OF_REGISTERS 12
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 6
+#define SLJIT_LOCALS_OFFSET_BASE (sizeof(sljit_sw))
+#else
+#define SLJIT_NUMBER_OF_REGISTERS 12
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
+#define SLJIT_LOCALS_OFFSET_BASE ((4 + 2) * sizeof(sljit_sw))
+#endif /* _WIN64 */
+
+#elif (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7)
+
+#define SLJIT_NUMBER_OF_REGISTERS 11
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
+#define SLJIT_LOCALS_OFFSET_BASE 0
+
+#elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
+
+#define SLJIT_NUMBER_OF_REGISTERS 11
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 7
+#define SLJIT_LOCALS_OFFSET_BASE 0
+
+#elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
+
+#define SLJIT_NUMBER_OF_REGISTERS 25
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 10
+#define SLJIT_LOCALS_OFFSET_BASE (2 * sizeof(sljit_sw))
+
+#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC)
+
+#define SLJIT_NUMBER_OF_REGISTERS 22
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 17
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) || (defined _AIX)
+#define SLJIT_LOCALS_OFFSET_BASE ((6 + 8) * sizeof(sljit_sw))
+#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
+/* Add +1 for double alignment. */
+#define SLJIT_LOCALS_OFFSET_BASE ((3 + 1) * sizeof(sljit_sw))
+#else
+#define SLJIT_LOCALS_OFFSET_BASE (3 * sizeof(sljit_sw))
+#endif /* SLJIT_CONFIG_PPC_64 || _AIX */
+
+#elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS)
+
+#define SLJIT_NUMBER_OF_REGISTERS 17
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+#define SLJIT_LOCALS_OFFSET_BASE (4 * sizeof(sljit_sw))
+#else
+#define SLJIT_LOCALS_OFFSET_BASE 0
+#endif
+
+#elif (defined SLJIT_CONFIG_SPARC && SLJIT_CONFIG_SPARC)
+
+#define SLJIT_NUMBER_OF_REGISTERS 18
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 14
+#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
+/* Add +1 for double alignment. */
+#define SLJIT_LOCALS_OFFSET_BASE ((23 + 1) * sizeof(sljit_sw))
+#endif
+
+#elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
+
+#define SLJIT_NUMBER_OF_REGISTERS 0
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 0
+#define SLJIT_LOCALS_OFFSET_BASE 0
+
+#endif
+
+#define SLJIT_LOCALS_OFFSET (SLJIT_LOCALS_OFFSET_BASE)
+
+#define SLJIT_NUMBER_OF_SCRATCH_REGISTERS \
+ (SLJIT_NUMBER_OF_REGISTERS - SLJIT_NUMBER_OF_SAVED_REGISTERS)
+
+#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 6
+#if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && (defined _WIN64)
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 1
+#else
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0
+#endif
+
+#define SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS \
+ (SLJIT_NUMBER_OF_FLOAT_REGISTERS - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS)
+
+/*************************************/
+/* Debug and verbose related macros. */
+/*************************************/
+
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
#include <stdio.h>
#endif
diff --git a/dist/sljit/sljitLir.c b/dist/sljit/sljitLir.c
index 69c4b10..5039a7e 100644
--- a/dist/sljit/sljitLir.c
+++ b/dist/sljit/sljitLir.c
@@ -38,12 +38,6 @@
return NULL; \
} while (0)
-#define CHECK_ERROR_VOID() \
- do { \
- if (SLJIT_UNLIKELY(compiler->error)) \
- return; \
- } while (0)
-
#define FAIL_IF(expr) \
do { \
if (SLJIT_UNLIKELY(expr)) \
@@ -236,77 +230,9 @@
(saveds < SLJIT_NUMBER_OF_SAVED_REGISTERS ? saveds : SLJIT_NUMBER_OF_SAVED_REGISTERS) + \
extra) * sizeof(sljit_sw))
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-#define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
-
-#if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL)
-#define FIXED_LOCALS_OFFSET ((2 + 4) * sizeof(sljit_sw))
-#else
-/* Maximum 3 arguments are passed on the stack. */
-#define FIXED_LOCALS_OFFSET ((3 + 4) * sizeof(sljit_sw))
-#endif
-
-#endif /* SLJIT_CONFIG_X86_32 */
-
-#if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
-#define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
-#ifdef _WIN64
-#define FIXED_LOCALS_OFFSET ((4 + 2) * sizeof(sljit_sw))
-#else
-#define FIXED_LOCALS_OFFSET (sizeof(sljit_sw))
-#endif
-#endif
-
-#if (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
-#define SLJIT_HAS_VARIABLE_LOCALS_OFFSET 1
-#endif
-
-#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
-#define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
-#ifdef _AIX
-#define FIXED_LOCALS_OFFSET ((6 + 8) * sizeof(sljit_sw))
-#else
-#define FIXED_LOCALS_OFFSET (3 * sizeof(sljit_sw))
-#endif
-#endif
-
-#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-#define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
-#define FIXED_LOCALS_OFFSET ((6 + 8) * sizeof(sljit_sw))
-#endif
-
-#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
-#define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
-#define FIXED_LOCALS_OFFSET (4 * sizeof(sljit_sw))
-#endif
-
-#if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
-#define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
-#define FIXED_LOCALS_OFFSET 0
-#endif
-
-#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-#define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
-#define FIXED_LOCALS_OFFSET (23 * sizeof(sljit_sw))
-#endif
-
-#if (defined SLJIT_HAS_VARIABLE_LOCALS_OFFSET && SLJIT_HAS_VARIABLE_LOCALS_OFFSET)
-
#define ADJUST_LOCAL_OFFSET(p, i) \
if ((p) == (SLJIT_MEM1(SLJIT_SP))) \
- (i) += compiler->locals_offset;
-
-#elif (defined SLJIT_HAS_FIXED_LOCALS_OFFSET && SLJIT_HAS_FIXED_LOCALS_OFFSET)
-
-#define ADJUST_LOCAL_OFFSET(p, i) \
- if ((p) == (SLJIT_MEM1(SLJIT_SP))) \
- (i) += FIXED_LOCALS_OFFSET;
-
-#else
-
-#define ADJUST_LOCAL_OFFSET(p, i)
-
-#endif
+ (i) += SLJIT_LOCALS_OFFSET;
#endif /* !(defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) */
@@ -319,6 +245,75 @@
#include "sljitExecAllocator.c"
#endif
+/* Argument checking features. */
+
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+
+/* Returns with error when an invalid argument is passed. */
+
+#define CHECK_ARGUMENT(x) \
+ do { \
+ if (SLJIT_UNLIKELY(!(x))) \
+ return 1; \
+ } while (0)
+
+#define CHECK_RETURN_TYPE sljit_si
+#define CHECK_RETURN_OK return 0
+
+#define CHECK(x) \
+ do { \
+ if (SLJIT_UNLIKELY(x)) { \
+ compiler->error = SLJIT_ERR_BAD_ARGUMENT; \
+ return SLJIT_ERR_BAD_ARGUMENT; \
+ } \
+ } while (0)
+
+#define CHECK_PTR(x) \
+ do { \
+ if (SLJIT_UNLIKELY(x)) { \
+ compiler->error = SLJIT_ERR_BAD_ARGUMENT; \
+ return NULL; \
+ } \
+ } while (0)
+
+#define CHECK_REG_INDEX(x) \
+ do { \
+ if (SLJIT_UNLIKELY(x)) { \
+ return -2; \
+ } \
+ } while (0)
+
+#elif (defined SLJIT_DEBUG && SLJIT_DEBUG)
+
+/* Assertion failure occures if an invalid argument is passed. */
+#undef SLJIT_ARGUMENT_CHECKS
+#define SLJIT_ARGUMENT_CHECKS 1
+
+#define CHECK_ARGUMENT(x) SLJIT_ASSERT(x)
+#define CHECK_RETURN_TYPE void
+#define CHECK_RETURN_OK return
+#define CHECK(x) x
+#define CHECK_PTR(x) x
+#define CHECK_REG_INDEX(x) x
+
+#elif (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
+
+/* Arguments are not checked. */
+#define CHECK_RETURN_TYPE void
+#define CHECK_RETURN_OK return
+#define CHECK(x) x
+#define CHECK_PTR(x) x
+#define CHECK_REG_INDEX(x) x
+
+#else
+
+/* Arguments are not checked. */
+#define CHECK(x)
+#define CHECK_PTR(x)
+#define CHECK_REG_INDEX(x)
+
+#endif /* SLJIT_ARGUMENT_CHECKS */
+
/* --------------------------------------------------------------------- */
/* Public functions */
/* --------------------------------------------------------------------- */
@@ -330,9 +325,9 @@
static void init_compiler(void);
#endif
-SLJIT_API_FUNC_ATTRIBUTE struct sljit_compiler* sljit_create_compiler(void)
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_compiler* sljit_create_compiler(void *allocator_data)
{
- struct sljit_compiler *compiler = (struct sljit_compiler*)SLJIT_MALLOC(sizeof(struct sljit_compiler));
+ struct sljit_compiler *compiler = (struct sljit_compiler*)SLJIT_MALLOC(sizeof(struct sljit_compiler), allocator_data);
if (!compiler)
return NULL;
SLJIT_ZEROMEM(compiler, sizeof(struct sljit_compiler));
@@ -354,15 +349,16 @@
/* Only the non-zero members must be set. */
compiler->error = SLJIT_SUCCESS;
- compiler->buf = (struct sljit_memory_fragment*)SLJIT_MALLOC(BUF_SIZE);
- compiler->abuf = (struct sljit_memory_fragment*)SLJIT_MALLOC(ABUF_SIZE);
+ compiler->allocator_data = allocator_data;
+ compiler->buf = (struct sljit_memory_fragment*)SLJIT_MALLOC(BUF_SIZE, allocator_data);
+ compiler->abuf = (struct sljit_memory_fragment*)SLJIT_MALLOC(ABUF_SIZE, allocator_data);
if (!compiler->buf || !compiler->abuf) {
if (compiler->buf)
- SLJIT_FREE(compiler->buf);
+ SLJIT_FREE(compiler->buf, allocator_data);
if (compiler->abuf)
- SLJIT_FREE(compiler->abuf);
- SLJIT_FREE(compiler);
+ SLJIT_FREE(compiler->abuf, allocator_data);
+ SLJIT_FREE(compiler, allocator_data);
return NULL;
}
@@ -375,17 +371,19 @@
compiler->saveds = -1;
compiler->fscratches = -1;
compiler->fsaveds = -1;
+ compiler->local_size = -1;
#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
compiler->args = -1;
#endif
#if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5)
- compiler->cpool = (sljit_uw*)SLJIT_MALLOC(CPOOL_SIZE * sizeof(sljit_uw) + CPOOL_SIZE * sizeof(sljit_ub));
+ compiler->cpool = (sljit_uw*)SLJIT_MALLOC(CPOOL_SIZE * sizeof(sljit_uw)
+ + CPOOL_SIZE * sizeof(sljit_ub), allocator_data);
if (!compiler->cpool) {
- SLJIT_FREE(compiler->buf);
- SLJIT_FREE(compiler->abuf);
- SLJIT_FREE(compiler);
+ SLJIT_FREE(compiler->buf, allocator_data);
+ SLJIT_FREE(compiler->abuf, allocator_data);
+ SLJIT_FREE(compiler, allocator_data);
return NULL;
}
compiler->cpool_unique = (sljit_ub*)(compiler->cpool + CPOOL_SIZE);
@@ -414,25 +412,33 @@
{
struct sljit_memory_fragment *buf;
struct sljit_memory_fragment *curr;
+ void *allocator_data = compiler->allocator_data;
+ SLJIT_UNUSED_ARG(allocator_data);
buf = compiler->buf;
while (buf) {
curr = buf;
buf = buf->next;
- SLJIT_FREE(curr);
+ SLJIT_FREE(curr, allocator_data);
}
buf = compiler->abuf;
while (buf) {
curr = buf;
buf = buf->next;
- SLJIT_FREE(curr);
+ SLJIT_FREE(curr, allocator_data);
}
#if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5)
- SLJIT_FREE(compiler->cpool);
+ SLJIT_FREE(compiler->cpool, allocator_data);
#endif
- SLJIT_FREE(compiler);
+ SLJIT_FREE(compiler, allocator_data);
+}
+
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_compiler_memory_error(struct sljit_compiler *compiler)
+{
+ if (compiler->error == SLJIT_SUCCESS)
+ compiler->error = SLJIT_ERR_ALLOC_FAILED;
}
#if (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
@@ -488,7 +494,7 @@
compiler->buf->used_size += size;
return ret;
}
- new_frag = (struct sljit_memory_fragment*)SLJIT_MALLOC(BUF_SIZE);
+ new_frag = (struct sljit_memory_fragment*)SLJIT_MALLOC(BUF_SIZE, compiler->allocator_data);
PTR_FAIL_IF_NULL(new_frag);
new_frag->next = compiler->buf;
compiler->buf = new_frag;
@@ -507,7 +513,7 @@
compiler->abuf->used_size += size;
return ret;
}
- new_frag = (struct sljit_memory_fragment*)SLJIT_MALLOC(ABUF_SIZE);
+ new_frag = (struct sljit_memory_fragment*)SLJIT_MALLOC(ABUF_SIZE, compiler->allocator_data);
PTR_FAIL_IF_NULL(new_frag);
new_frag->next = compiler->abuf;
compiler->abuf = new_frag;
@@ -547,6 +553,40 @@
compiler->buf = prev;
}
+static SLJIT_INLINE void set_emit_enter(struct sljit_compiler *compiler,
+ sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
+ sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
+{
+ SLJIT_UNUSED_ARG(args);
+ SLJIT_UNUSED_ARG(local_size);
+
+ compiler->options = options;
+ compiler->scratches = scratches;
+ compiler->saveds = saveds;
+ compiler->fscratches = fscratches;
+ compiler->fsaveds = fsaveds;
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ compiler->logical_local_size = local_size;
+#endif
+}
+
+static SLJIT_INLINE void set_set_context(struct sljit_compiler *compiler,
+ sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
+ sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
+{
+ SLJIT_UNUSED_ARG(args);
+ SLJIT_UNUSED_ARG(local_size);
+
+ compiler->options = options;
+ compiler->scratches = scratches;
+ compiler->saveds = saveds;
+ compiler->fscratches = fscratches;
+ compiler->fsaveds = fsaveds;
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ compiler->logical_local_size = local_size;
+#endif
+}
+
static SLJIT_INLINE void set_label(struct sljit_label *label, struct sljit_compiler *compiler)
{
label->next = NULL;
@@ -583,9 +623,9 @@
#define ADDRESSING_DEPENDS_ON(exp, reg) \
(((exp) & SLJIT_MEM) && (((exp) & REG_MASK) == reg || OFFS_REG(exp) == reg))
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
#define FUNCTION_CHECK_OP() \
- SLJIT_ASSERT(!GET_FLAGS(op) || !(op & SLJIT_KEEP_FLAGS)); \
+ CHECK_ARGUMENT(!GET_FLAGS(op) || !(op & SLJIT_KEEP_FLAGS)); \
switch (GET_OPCODE(op)) { \
case SLJIT_NOT: \
case SLJIT_CLZ: \
@@ -595,27 +635,27 @@
case SLJIT_SHL: \
case SLJIT_LSHR: \
case SLJIT_ASHR: \
- SLJIT_ASSERT(!(op & (SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C))); \
+ CHECK_ARGUMENT(!(op & (SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C))); \
break; \
case SLJIT_NEG: \
- SLJIT_ASSERT(!(op & (SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_C))); \
+ CHECK_ARGUMENT(!(op & (SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_C))); \
break; \
case SLJIT_MUL: \
- SLJIT_ASSERT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_C))); \
+ CHECK_ARGUMENT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_C))); \
break; \
case SLJIT_ADD: \
- SLJIT_ASSERT(!(op & (SLJIT_SET_U | SLJIT_SET_S))); \
+ CHECK_ARGUMENT(!(op & (SLJIT_SET_U | SLJIT_SET_S))); \
break; \
case SLJIT_SUB: \
break; \
case SLJIT_ADDC: \
case SLJIT_SUBC: \
- SLJIT_ASSERT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O))); \
+ CHECK_ARGUMENT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O))); \
break; \
case SLJIT_BREAKPOINT: \
case SLJIT_NOP: \
- case SLJIT_UMUL: \
- case SLJIT_SMUL: \
+ case SLJIT_LUMUL: \
+ case SLJIT_LSMUL: \
case SLJIT_MOV: \
case SLJIT_MOV_UI: \
case SLJIT_MOV_P: \
@@ -623,109 +663,112 @@
case SLJIT_MOVU_UI: \
case SLJIT_MOVU_P: \
/* Nothing allowed */ \
- SLJIT_ASSERT(!(op & (SLJIT_INT_OP | SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
+ CHECK_ARGUMENT(!(op & (SLJIT_INT_OP | SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
break; \
default: \
/* Only SLJIT_INT_OP or SLJIT_SINGLE_OP is allowed. */ \
- SLJIT_ASSERT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
+ CHECK_ARGUMENT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
break; \
}
#define FUNCTION_CHECK_FOP() \
- SLJIT_ASSERT(!GET_FLAGS(op) || !(op & SLJIT_KEEP_FLAGS)); \
+ CHECK_ARGUMENT(!GET_FLAGS(op) || !(op & SLJIT_KEEP_FLAGS)); \
switch (GET_OPCODE(op)) { \
- case SLJIT_CMPD: \
- SLJIT_ASSERT(!(op & (SLJIT_SET_U | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
- SLJIT_ASSERT((op & (SLJIT_SET_E | SLJIT_SET_S))); \
+ case SLJIT_DCMP: \
+ CHECK_ARGUMENT(!(op & (SLJIT_SET_U | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
+ CHECK_ARGUMENT((op & (SLJIT_SET_E | SLJIT_SET_S))); \
break; \
default: \
/* Only SLJIT_INT_OP or SLJIT_SINGLE_OP is allowed. */ \
- SLJIT_ASSERT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
+ CHECK_ARGUMENT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
break; \
}
#define FUNCTION_CHECK_IS_REG(r) \
+ (((r) >= SLJIT_R0 && (r) < (SLJIT_R0 + compiler->scratches)) || \
+ ((r) > (SLJIT_S0 - compiler->saveds) && (r) <= SLJIT_S0))
+
+#define FUNCTION_CHECK_IS_REG_OR_UNUSED(r) \
((r) == SLJIT_UNUSED || \
((r) >= SLJIT_R0 && (r) < (SLJIT_R0 + compiler->scratches)) || \
((r) > (SLJIT_S0 - compiler->saveds) && (r) <= SLJIT_S0))
#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-#define FUNCTION_ASSERT_IF_VIRTUAL(p) \
- SLJIT_ASSERT((p) < SLJIT_R3 || (p) > SLJIT_R6);
+#define CHECK_NOT_VIRTUAL_REGISTER(p) \
+ CHECK_ARGUMENT((p) < SLJIT_R3 || (p) > SLJIT_R6);
#else
-#define FUNCTION_ASSERT_IF_VIRTUAL(p)
+#define CHECK_NOT_VIRTUAL_REGISTER(p)
#endif
#define FUNCTION_CHECK_SRC(p, i) \
- SLJIT_ASSERT(compiler->scratches != -1 && compiler->saveds != -1); \
+ CHECK_ARGUMENT(compiler->scratches != -1 && compiler->saveds != -1); \
if (FUNCTION_CHECK_IS_REG(p)) \
- SLJIT_ASSERT((i) == 0 && (p) != SLJIT_UNUSED); \
+ CHECK_ARGUMENT((i) == 0); \
else if ((p) == SLJIT_IMM) \
; \
else if ((p) == (SLJIT_MEM1(SLJIT_SP))) \
- SLJIT_ASSERT((i) >= 0 && (i) < compiler->logical_local_size); \
- else if ((p) & SLJIT_MEM) { \
- SLJIT_ASSERT(FUNCTION_CHECK_IS_REG((p) & REG_MASK)); \
- FUNCTION_ASSERT_IF_VIRTUAL((p) & REG_MASK); \
+ CHECK_ARGUMENT((i) >= 0 && (i) < compiler->logical_local_size); \
+ else { \
+ CHECK_ARGUMENT((p) & SLJIT_MEM); \
+ CHECK_ARGUMENT(FUNCTION_CHECK_IS_REG_OR_UNUSED((p) & REG_MASK)); \
+ CHECK_NOT_VIRTUAL_REGISTER((p) & REG_MASK); \
if ((p) & OFFS_REG_MASK) { \
- SLJIT_ASSERT(FUNCTION_CHECK_IS_REG(OFFS_REG(p))); \
- FUNCTION_ASSERT_IF_VIRTUAL(OFFS_REG(p)); \
- SLJIT_ASSERT(!((i) & ~0x3)); \
+ CHECK_ARGUMENT(((p) & REG_MASK) != SLJIT_UNUSED); \
+ CHECK_ARGUMENT(FUNCTION_CHECK_IS_REG(OFFS_REG(p))); \
+ CHECK_NOT_VIRTUAL_REGISTER(OFFS_REG(p)); \
+ CHECK_ARGUMENT(!((i) & ~0x3)); \
} \
- SLJIT_ASSERT(!((p) & ~(SLJIT_MEM | SLJIT_IMM | REG_MASK | OFFS_REG_MASK))); \
- } \
- else \
- SLJIT_ASSERT_STOP();
+ CHECK_ARGUMENT(!((p) & ~(SLJIT_MEM | SLJIT_IMM | REG_MASK | OFFS_REG_MASK))); \
+ }
#define FUNCTION_CHECK_DST(p, i) \
- SLJIT_ASSERT(compiler->scratches != -1 && compiler->saveds != -1); \
- if (FUNCTION_CHECK_IS_REG(p)) \
- SLJIT_ASSERT((i) == 0); \
+ CHECK_ARGUMENT(compiler->scratches != -1 && compiler->saveds != -1); \
+ if (FUNCTION_CHECK_IS_REG_OR_UNUSED(p)) \
+ CHECK_ARGUMENT((i) == 0); \
else if ((p) == (SLJIT_MEM1(SLJIT_SP))) \
- SLJIT_ASSERT((i) >= 0 && (i) < compiler->logical_local_size); \
- else if ((p) & SLJIT_MEM) { \
- SLJIT_ASSERT(FUNCTION_CHECK_IS_REG((p) & REG_MASK)); \
- FUNCTION_ASSERT_IF_VIRTUAL((p) & REG_MASK); \
+ CHECK_ARGUMENT((i) >= 0 && (i) < compiler->logical_local_size); \
+ else { \
+ CHECK_ARGUMENT((p) & SLJIT_MEM); \
+ CHECK_ARGUMENT(FUNCTION_CHECK_IS_REG_OR_UNUSED((p) & REG_MASK)); \
+ CHECK_NOT_VIRTUAL_REGISTER((p) & REG_MASK); \
if ((p) & OFFS_REG_MASK) { \
- SLJIT_ASSERT(FUNCTION_CHECK_IS_REG(OFFS_REG(p))); \
- FUNCTION_ASSERT_IF_VIRTUAL(OFFS_REG(p)); \
- SLJIT_ASSERT(!((i) & ~0x3)); \
+ CHECK_ARGUMENT(((p) & REG_MASK) != SLJIT_UNUSED); \
+ CHECK_ARGUMENT(FUNCTION_CHECK_IS_REG(OFFS_REG(p))); \
+ CHECK_NOT_VIRTUAL_REGISTER(OFFS_REG(p)); \
+ CHECK_ARGUMENT(!((i) & ~0x3)); \
} \
- SLJIT_ASSERT(!((p) & ~(SLJIT_MEM | SLJIT_IMM | REG_MASK | OFFS_REG_MASK))); \
- } \
- else \
- SLJIT_ASSERT_STOP();
+ CHECK_ARGUMENT(!((p) & ~(SLJIT_MEM | SLJIT_IMM | REG_MASK | OFFS_REG_MASK))); \
+ }
#define FUNCTION_FCHECK(p, i) \
- SLJIT_ASSERT(compiler->fscratches != -1 && compiler->fsaveds != -1); \
+ CHECK_ARGUMENT(compiler->fscratches != -1 && compiler->fsaveds != -1); \
if (((p) >= SLJIT_FR0 && (p) < (SLJIT_FR0 + compiler->fscratches)) || \
((p) > (SLJIT_FS0 - compiler->fsaveds) && (p) <= SLJIT_FS0)) \
- SLJIT_ASSERT(i == 0); \
+ CHECK_ARGUMENT(i == 0); \
else if ((p) == (SLJIT_MEM1(SLJIT_SP))) \
- SLJIT_ASSERT((i) >= 0 && (i) < compiler->logical_local_size); \
- else if ((p) & SLJIT_MEM) { \
- SLJIT_ASSERT(FUNCTION_CHECK_IS_REG((p) & REG_MASK)); \
- FUNCTION_ASSERT_IF_VIRTUAL((p) & REG_MASK); \
+ CHECK_ARGUMENT((i) >= 0 && (i) < compiler->logical_local_size); \
+ else { \
+ CHECK_ARGUMENT((p) & SLJIT_MEM); \
+ CHECK_ARGUMENT(FUNCTION_CHECK_IS_REG_OR_UNUSED((p) & REG_MASK)); \
+ CHECK_NOT_VIRTUAL_REGISTER((p) & REG_MASK); \
if ((p) & OFFS_REG_MASK) { \
- SLJIT_ASSERT(FUNCTION_CHECK_IS_REG(OFFS_REG(p))); \
- FUNCTION_ASSERT_IF_VIRTUAL(OFFS_REG(p)); \
- SLJIT_ASSERT(((p) & OFFS_REG_MASK) != TO_OFFS_REG(SLJIT_SP) && !(i & ~0x3)); \
- } else \
- SLJIT_ASSERT(OFFS_REG(p) == 0); \
- SLJIT_ASSERT(!((p) & ~(SLJIT_MEM | SLJIT_IMM | REG_MASK | OFFS_REG_MASK))); \
- } \
- else \
- SLJIT_ASSERT_STOP();
+ CHECK_ARGUMENT(((p) & REG_MASK) != SLJIT_UNUSED); \
+ CHECK_ARGUMENT(FUNCTION_CHECK_IS_REG(OFFS_REG(p))); \
+ CHECK_NOT_VIRTUAL_REGISTER(OFFS_REG(p)); \
+ CHECK_ARGUMENT(((p) & OFFS_REG_MASK) != TO_OFFS_REG(SLJIT_SP) && !(i & ~0x3)); \
+ } \
+ CHECK_ARGUMENT(!((p) & ~(SLJIT_MEM | SLJIT_IMM | REG_MASK | OFFS_REG_MASK))); \
+ }
#define FUNCTION_CHECK_OP1() \
if (GET_OPCODE(op) >= SLJIT_MOVU && GET_OPCODE(op) <= SLJIT_MOVU_P) { \
- SLJIT_ASSERT(!(src & SLJIT_MEM) || (src & REG_MASK) != SLJIT_SP); \
- SLJIT_ASSERT(!(dst & SLJIT_MEM) || (dst & REG_MASK) != SLJIT_SP); \
+ CHECK_ARGUMENT(!(src & SLJIT_MEM) || (src & REG_MASK) != SLJIT_SP); \
+ CHECK_ARGUMENT(!(dst & SLJIT_MEM) || (dst & REG_MASK) != SLJIT_SP); \
if ((src & SLJIT_MEM) && (src & REG_MASK)) \
- SLJIT_ASSERT((dst & REG_MASK) != (src & REG_MASK) && OFFS_REG(dst) != (src & REG_MASK)); \
+ CHECK_ARGUMENT((dst & REG_MASK) != (src & REG_MASK) && OFFS_REG(dst) != (src & REG_MASK)); \
}
-#endif
+#endif /* SLJIT_ARGUMENT_CHECKS */
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
@@ -803,14 +846,14 @@
static SLJIT_CONST char* op0_names[] = {
(char*)"breakpoint", (char*)"nop",
- (char*)"umul", (char*)"smul", (char*)"udiv", (char*)"sdiv",
+ (char*)"lumul", (char*)"lsmul", (char*)"ludiv", (char*)"lsdiv",
};
static SLJIT_CONST char* op1_names[] = {
- (char*)"mov", (char*)"mov.ub", (char*)"mov.sb", (char*)"mov.uh",
- (char*)"mov.sh", (char*)"mov.ui", (char*)"mov.si", (char*)"mov.p",
- (char*)"movu", (char*)"movu.ub", (char*)"movu.sb", (char*)"movu.uh",
- (char*)"movu.sh", (char*)"movu.ui", (char*)"movu.si", (char*)"movu.p",
+ (char*)"mov", (char*)"mov_ub", (char*)"mov_sb", (char*)"mov_uh",
+ (char*)"mov_sh", (char*)"mov_ui", (char*)"mov_si", (char*)"mov_p",
+ (char*)"movu", (char*)"movu_ub", (char*)"movu_sb", (char*)"movu_uh",
+ (char*)"movu_sh", (char*)"movu_ui", (char*)"movu_si", (char*)"movu_p",
(char*)"not", (char*)"neg", (char*)"clz",
};
@@ -830,6 +873,10 @@
(char*)"add", (char*)"sub", (char*)"mul", (char*)"div"
};
+#define JUMP_PREFIX(type) \
+ ((type & 0xff) <= SLJIT_MUL_NOT_OVERFLOW ? ((type & SLJIT_INT_OP) ? "i_" : "") \
+ : ((type & 0xff) <= SLJIT_D_ORDERED ? ((type & SLJIT_SINGLE_OP) ? "s_" : "d_") : ""))
+
static char* jump_names[] = {
(char*)"equal", (char*)"not_equal",
(char*)"less", (char*)"greater_equal",
@@ -838,123 +885,108 @@
(char*)"sig_greater", (char*)"sig_less_equal",
(char*)"overflow", (char*)"not_overflow",
(char*)"mul_overflow", (char*)"mul_not_overflow",
- (char*)"float_equal", (char*)"float_not_equal",
- (char*)"float_less", (char*)"float_greater_equal",
- (char*)"float_greater", (char*)"float_less_equal",
- (char*)"float_unordered", (char*)"float_ordered",
+ (char*)"equal", (char*)"not_equal",
+ (char*)"less", (char*)"greater_equal",
+ (char*)"greater", (char*)"less_equal",
+ (char*)"unordered", (char*)"ordered",
(char*)"jump", (char*)"fast_call",
(char*)"call0", (char*)"call1", (char*)"call2", (char*)"call3"
};
-#endif
+#endif /* SLJIT_VERBOSE */
/* --------------------------------------------------------------------- */
/* Arch dependent */
/* --------------------------------------------------------------------- */
-static SLJIT_INLINE void check_sljit_generate_code(struct sljit_compiler *compiler)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS) \
+ || (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
+
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_generate_code(struct sljit_compiler *compiler)
{
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
struct sljit_jump *jump;
#endif
- /* If debug and verbose are disabled, all arguments are unused. */
+
SLJIT_UNUSED_ARG(compiler);
- SLJIT_ASSERT(compiler->size > 0);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(compiler->size > 0);
jump = compiler->jumps;
while (jump) {
/* All jumps have target. */
- SLJIT_ASSERT(jump->flags & (JUMP_LABEL | JUMP_ADDR));
+ CHECK_ARGUMENT(jump->flags & (JUMP_LABEL | JUMP_ADDR));
jump = jump->next;
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_enter(struct sljit_compiler *compiler,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_enter(struct sljit_compiler *compiler,
sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
{
- /* If debug and verbose are disabled, all arguments are unused. */
SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(options);
- SLJIT_UNUSED_ARG(args);
- SLJIT_UNUSED_ARG(scratches);
- SLJIT_UNUSED_ARG(saveds);
- SLJIT_UNUSED_ARG(fscratches);
- SLJIT_UNUSED_ARG(fsaveds);
- SLJIT_UNUSED_ARG(local_size);
- SLJIT_ASSERT(options == 0);
- SLJIT_ASSERT(args >= 0 && args <= 3);
- SLJIT_ASSERT(scratches >= 0 && scratches <= SLJIT_NUMBER_OF_REGISTERS);
- SLJIT_ASSERT(saveds >= 0 && saveds <= SLJIT_NUMBER_OF_REGISTERS);
- SLJIT_ASSERT(scratches + saveds <= SLJIT_NUMBER_OF_REGISTERS);
- SLJIT_ASSERT(args <= saveds);
- SLJIT_ASSERT(fscratches >= 0 && fscratches <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
- SLJIT_ASSERT(fsaveds >= 0 && fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
- SLJIT_ASSERT(fscratches + fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
- SLJIT_ASSERT(local_size >= 0 && local_size <= SLJIT_MAX_LOCAL_SIZE);
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(!(options & ~SLJIT_DOUBLE_ALIGNMENT));
+ CHECK_ARGUMENT(args >= 0 && args <= 3);
+ CHECK_ARGUMENT(scratches >= 0 && scratches <= SLJIT_NUMBER_OF_REGISTERS);
+ CHECK_ARGUMENT(saveds >= 0 && saveds <= SLJIT_NUMBER_OF_REGISTERS);
+ CHECK_ARGUMENT(scratches + saveds <= SLJIT_NUMBER_OF_REGISTERS);
+ CHECK_ARGUMENT(args <= saveds);
+ CHECK_ARGUMENT(fscratches >= 0 && fscratches <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+ CHECK_ARGUMENT(fsaveds >= 0 && fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+ CHECK_ARGUMENT(fscratches + fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+ CHECK_ARGUMENT(local_size >= 0 && local_size <= SLJIT_MAX_LOCAL_SIZE);
+#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
if (SLJIT_UNLIKELY(!!compiler->verbose))
fprintf(compiler->verbose, " enter options:none args:%d scratches:%d saveds:%d fscratches:%d fsaveds:%d local_size:%d\n",
args, scratches, saveds, fscratches, fsaveds, local_size);
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_set_context(struct sljit_compiler *compiler,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_set_context(struct sljit_compiler *compiler,
sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(options);
- SLJIT_UNUSED_ARG(args);
- SLJIT_UNUSED_ARG(scratches);
- SLJIT_UNUSED_ARG(saveds);
- SLJIT_UNUSED_ARG(fscratches);
- SLJIT_UNUSED_ARG(fsaveds);
- SLJIT_UNUSED_ARG(local_size);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
if (SLJIT_UNLIKELY(compiler->skip_checks)) {
compiler->skip_checks = 0;
- return;
+ CHECK_RETURN_OK;
}
-#endif
- SLJIT_ASSERT(options == 0);
- SLJIT_ASSERT(args >= 0 && args <= 3);
- SLJIT_ASSERT(scratches >= 0 && scratches <= SLJIT_NUMBER_OF_REGISTERS);
- SLJIT_ASSERT(saveds >= 0 && saveds <= SLJIT_NUMBER_OF_REGISTERS);
- SLJIT_ASSERT(scratches + saveds <= SLJIT_NUMBER_OF_REGISTERS);
- SLJIT_ASSERT(args <= saveds);
- SLJIT_ASSERT(fscratches >= 0 && fscratches <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
- SLJIT_ASSERT(fsaveds >= 0 && fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
- SLJIT_ASSERT(fscratches + fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
- SLJIT_ASSERT(local_size >= 0 && local_size <= SLJIT_MAX_LOCAL_SIZE);
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(!(options & ~SLJIT_DOUBLE_ALIGNMENT));
+ CHECK_ARGUMENT(args >= 0 && args <= 3);
+ CHECK_ARGUMENT(scratches >= 0 && scratches <= SLJIT_NUMBER_OF_REGISTERS);
+ CHECK_ARGUMENT(saveds >= 0 && saveds <= SLJIT_NUMBER_OF_REGISTERS);
+ CHECK_ARGUMENT(scratches + saveds <= SLJIT_NUMBER_OF_REGISTERS);
+ CHECK_ARGUMENT(args <= saveds);
+ CHECK_ARGUMENT(fscratches >= 0 && fscratches <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+ CHECK_ARGUMENT(fsaveds >= 0 && fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+ CHECK_ARGUMENT(fscratches + fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+ CHECK_ARGUMENT(local_size >= 0 && local_size <= SLJIT_MAX_LOCAL_SIZE);
+#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
if (SLJIT_UNLIKELY(!!compiler->verbose))
fprintf(compiler->verbose, " set_context options:none args:%d scratches:%d saveds:%d fscratches:%d fsaveds:%d local_size:%d\n",
args, scratches, saveds, fscratches, fsaveds, local_size);
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(op);
- SLJIT_UNUSED_ARG(src);
- SLJIT_UNUSED_ARG(srcw);
-
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(compiler->scratches >= 0);
if (op != SLJIT_UNUSED) {
- SLJIT_ASSERT(op >= SLJIT_MOV && op <= SLJIT_MOV_P);
+ CHECK_ARGUMENT(op >= SLJIT_MOV && op <= SLJIT_MOV_P);
FUNCTION_CHECK_SRC(src, srcw);
}
else
- SLJIT_ASSERT(src == 0 && srcw == 0);
+ CHECK_ARGUMENT(src == 0 && srcw == 0);
#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
if (SLJIT_UNLIKELY(!!compiler->verbose)) {
@@ -967,16 +999,12 @@
}
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(dst);
- SLJIT_UNUSED_ARG(dstw);
-
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
FUNCTION_CHECK_DST(dst, dstw);
#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
@@ -986,16 +1014,12 @@
fprintf(compiler->verbose, "\n");
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(src);
- SLJIT_UNUSED_ARG(srcw);
-
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
FUNCTION_CHECK_SRC(src, srcw);
#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
@@ -1005,44 +1029,34 @@
fprintf(compiler->verbose, "\n");
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(op);
-
- SLJIT_ASSERT((op >= SLJIT_BREAKPOINT && op <= SLJIT_SMUL)
- || ((op & ~SLJIT_INT_OP) >= SLJIT_UDIV && (op & ~SLJIT_INT_OP) <= SLJIT_SDIV));
- SLJIT_ASSERT(op < SLJIT_UMUL || compiler->scratches >= 2);
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT((op >= SLJIT_BREAKPOINT && op <= SLJIT_LSMUL)
+ || ((op & ~SLJIT_INT_OP) >= SLJIT_LUDIV && (op & ~SLJIT_INT_OP) <= SLJIT_LSDIV));
+ CHECK_ARGUMENT(op < SLJIT_LUMUL || compiler->scratches >= 2);
+#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
if (SLJIT_UNLIKELY(!!compiler->verbose))
fprintf(compiler->verbose, " %s%s\n", !(op & SLJIT_INT_OP) ? "" : "i", op0_names[GET_OPCODE(op) - SLJIT_OP0_BASE]);
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_op1(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_op1(struct sljit_compiler *compiler, sljit_si op,
sljit_si dst, sljit_sw dstw,
sljit_si src, sljit_sw srcw)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(op);
- SLJIT_UNUSED_ARG(dst);
- SLJIT_UNUSED_ARG(dstw);
- SLJIT_UNUSED_ARG(src);
- SLJIT_UNUSED_ARG(srcw);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
if (SLJIT_UNLIKELY(compiler->skip_checks)) {
compiler->skip_checks = 0;
- return;
+ CHECK_RETURN_OK;
}
-#endif
- SLJIT_ASSERT(GET_OPCODE(op) >= SLJIT_MOV && GET_OPCODE(op) <= SLJIT_CLZ);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(GET_OPCODE(op) >= SLJIT_MOV && GET_OPCODE(op) <= SLJIT_CLZ);
FUNCTION_CHECK_OP();
FUNCTION_CHECK_SRC(src, srcw);
FUNCTION_CHECK_DST(dst, dstw);
@@ -1059,32 +1073,21 @@
fprintf(compiler->verbose, "\n");
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_op2(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_op2(struct sljit_compiler *compiler, sljit_si op,
sljit_si dst, sljit_sw dstw,
sljit_si src1, sljit_sw src1w,
sljit_si src2, sljit_sw src2w)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(op);
- SLJIT_UNUSED_ARG(dst);
- SLJIT_UNUSED_ARG(dstw);
- SLJIT_UNUSED_ARG(src1);
- SLJIT_UNUSED_ARG(src1w);
- SLJIT_UNUSED_ARG(src2);
- SLJIT_UNUSED_ARG(src2w);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
if (SLJIT_UNLIKELY(compiler->skip_checks)) {
compiler->skip_checks = 0;
- return;
+ CHECK_RETURN_OK;
}
-#endif
- SLJIT_ASSERT(GET_OPCODE(op) >= SLJIT_ADD && GET_OPCODE(op) <= SLJIT_ASHR);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(GET_OPCODE(op) >= SLJIT_ADD && GET_OPCODE(op) <= SLJIT_ASHR);
FUNCTION_CHECK_OP();
FUNCTION_CHECK_SRC(src1, src1w);
FUNCTION_CHECK_SRC(src2, src2w);
@@ -1103,152 +1106,134 @@
fprintf(compiler->verbose, "\n");
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_get_register_index(sljit_si reg)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_get_register_index(sljit_si reg)
{
SLJIT_UNUSED_ARG(reg);
- SLJIT_ASSERT(reg > 0 && reg <= SLJIT_NUMBER_OF_REGISTERS);
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(reg > 0 && reg <= SLJIT_NUMBER_OF_REGISTERS);
+#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_get_float_register_index(sljit_si reg)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_get_float_register_index(sljit_si reg)
{
SLJIT_UNUSED_ARG(reg);
- SLJIT_ASSERT(reg > 0 && reg <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(reg > 0 && reg <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_op_custom(struct sljit_compiler *compiler,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_op_custom(struct sljit_compiler *compiler,
void *instruction, sljit_si size)
{
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
+ int i;
+#endif
+
SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(instruction);
- SLJIT_UNUSED_ARG(size);
- SLJIT_ASSERT(instruction);
+
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(instruction);
+#if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86)
+ CHECK_ARGUMENT(size > 0 && size < 16);
+#elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
+ CHECK_ARGUMENT((size == 2 && (((sljit_sw)instruction) & 0x1) == 0)
+ || (size == 4 && (((sljit_sw)instruction) & 0x3) == 0));
+#else
+ CHECK_ARGUMENT(size == 4 && (((sljit_sw)instruction) & 0x3) == 0);
+#endif
+
+#endif
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
+ if (SLJIT_UNLIKELY(!!compiler->verbose)) {
+ fprintf(compiler->verbose, " op_custom");
+ for (i = 0; i < size; i++)
+ fprintf(compiler->verbose, " 0x%x", ((sljit_ub*)instruction)[i]);
+ fprintf(compiler->verbose, "\n");
+ }
+#endif
+ CHECK_RETURN_OK;
}
-#define SELECT_FOP1_OPERATION_WITH_CHECKS(compiler, op, dst, dstw, src, srcw) \
- SLJIT_ASSERT(sljit_is_fpu_available()); \
- SLJIT_COMPILE_ASSERT(!(SLJIT_CONVW_FROMD & 0x1) && !(SLJIT_CONVD_FROMW & 0x1), \
- invalid_float_opcodes); \
- if (GET_OPCODE(op) >= SLJIT_CONVW_FROMD && GET_OPCODE(op) <= SLJIT_CMPD) { \
- if (GET_OPCODE(op) == SLJIT_CMPD) { \
- check_sljit_emit_fop1_cmp(compiler, op, dst, dstw, src, srcw); \
- ADJUST_LOCAL_OFFSET(dst, dstw); \
- ADJUST_LOCAL_OFFSET(src, srcw); \
- return sljit_emit_fop1_cmp(compiler, op, dst, dstw, src, srcw); \
- } \
- if ((GET_OPCODE(op) | 0x1) == SLJIT_CONVI_FROMD) { \
- check_sljit_emit_fop1_convw_fromd(compiler, op, dst, dstw, src, srcw); \
- ADJUST_LOCAL_OFFSET(dst, dstw); \
- ADJUST_LOCAL_OFFSET(src, srcw); \
- return sljit_emit_fop1_convw_fromd(compiler, op, dst, dstw, src, srcw); \
- } \
- check_sljit_emit_fop1_convd_fromw(compiler, op, dst, dstw, src, srcw); \
- ADJUST_LOCAL_OFFSET(dst, dstw); \
- ADJUST_LOCAL_OFFSET(src, srcw); \
- return sljit_emit_fop1_convd_fromw(compiler, op, dst, dstw, src, srcw); \
- } \
- check_sljit_emit_fop1(compiler, op, dst, dstw, src, srcw); \
- ADJUST_LOCAL_OFFSET(dst, dstw); \
- ADJUST_LOCAL_OFFSET(src, srcw);
-
-static SLJIT_INLINE void check_sljit_emit_fop1(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fop1(struct sljit_compiler *compiler, sljit_si op,
sljit_si dst, sljit_sw dstw,
sljit_si src, sljit_sw srcw)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(op);
- SLJIT_UNUSED_ARG(dst);
- SLJIT_UNUSED_ARG(dstw);
- SLJIT_UNUSED_ARG(src);
- SLJIT_UNUSED_ARG(srcw);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
if (SLJIT_UNLIKELY(compiler->skip_checks)) {
compiler->skip_checks = 0;
- return;
+ CHECK_RETURN_OK;
}
-#endif
- SLJIT_ASSERT(GET_OPCODE(op) >= SLJIT_MOVD && GET_OPCODE(op) <= SLJIT_ABSD);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(sljit_is_fpu_available());
+ CHECK_ARGUMENT(GET_OPCODE(op) >= SLJIT_DMOV && GET_OPCODE(op) <= SLJIT_DABS);
FUNCTION_CHECK_FOP();
FUNCTION_FCHECK(src, srcw);
FUNCTION_FCHECK(dst, dstw);
#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
if (SLJIT_UNLIKELY(!!compiler->verbose)) {
- fprintf(compiler->verbose, " %s%s ", fop1_names[GET_OPCODE(op) - SLJIT_FOP1_BASE],
- (GET_OPCODE(op) == SLJIT_CONVD_FROMS)
- ? ((op & SLJIT_SINGLE_OP) ? "s.fromd" : "d.froms")
- : ((op & SLJIT_SINGLE_OP) ? "s" : "d"));
+ if (GET_OPCODE(op) == SLJIT_CONVD_FROMS)
+ fprintf(compiler->verbose, " %s%s ", fop1_names[SLJIT_CONVD_FROMS - SLJIT_FOP1_BASE],
+ (op & SLJIT_SINGLE_OP) ? "s.fromd" : "d.froms");
+ else
+ fprintf(compiler->verbose, " %s%s ", (op & SLJIT_SINGLE_OP) ? "s" : "d",
+ fop1_names[GET_OPCODE(op) - SLJIT_FOP1_BASE]);
+
sljit_verbose_fparam(compiler, dst, dstw);
fprintf(compiler->verbose, ", ");
sljit_verbose_fparam(compiler, src, srcw);
fprintf(compiler->verbose, "\n");
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_fop1_cmp(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fop1_cmp(struct sljit_compiler *compiler, sljit_si op,
sljit_si src1, sljit_sw src1w,
sljit_si src2, sljit_sw src2w)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(op);
- SLJIT_UNUSED_ARG(src1);
- SLJIT_UNUSED_ARG(src1w);
- SLJIT_UNUSED_ARG(src2);
- SLJIT_UNUSED_ARG(src2w);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
if (SLJIT_UNLIKELY(compiler->skip_checks)) {
compiler->skip_checks = 0;
- return;
+ CHECK_RETURN_OK;
}
-#endif
- SLJIT_ASSERT(GET_OPCODE(op) == SLJIT_CMPD);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(sljit_is_fpu_available());
+ CHECK_ARGUMENT(GET_OPCODE(op) == SLJIT_DCMP);
FUNCTION_CHECK_FOP();
FUNCTION_FCHECK(src1, src1w);
FUNCTION_FCHECK(src2, src2w);
#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
if (SLJIT_UNLIKELY(!!compiler->verbose)) {
- fprintf(compiler->verbose, " %s%s%s%s ", fop1_names[GET_OPCODE(op) - SLJIT_FOP1_BASE], (op & SLJIT_SINGLE_OP) ? "s" : "d",
- !(op & SLJIT_SET_E) ? "" : ".e", !(op & SLJIT_SET_S) ? "" : ".s");
+ fprintf(compiler->verbose, " %s%s%s%s ", (op & SLJIT_SINGLE_OP) ? "s" : "d", fop1_names[SLJIT_DCMP - SLJIT_FOP1_BASE],
+ (op & SLJIT_SET_E) ? ".e" : "", (op & SLJIT_SET_S) ? ".s" : "");
sljit_verbose_fparam(compiler, src1, src1w);
fprintf(compiler->verbose, ", ");
sljit_verbose_fparam(compiler, src2, src2w);
fprintf(compiler->verbose, "\n");
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_fop1_convw_fromd(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fop1_convw_fromd(struct sljit_compiler *compiler, sljit_si op,
sljit_si dst, sljit_sw dstw,
sljit_si src, sljit_sw srcw)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(op);
- SLJIT_UNUSED_ARG(dst);
- SLJIT_UNUSED_ARG(dstw);
- SLJIT_UNUSED_ARG(src);
- SLJIT_UNUSED_ARG(srcw);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
if (SLJIT_UNLIKELY(compiler->skip_checks)) {
compiler->skip_checks = 0;
- return;
+ CHECK_RETURN_OK;
}
-#endif
- SLJIT_ASSERT(GET_OPCODE(op) >= SLJIT_CONVW_FROMD && GET_OPCODE(op) <= SLJIT_CONVI_FROMD);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(sljit_is_fpu_available());
+ CHECK_ARGUMENT(GET_OPCODE(op) >= SLJIT_CONVW_FROMD && GET_OPCODE(op) <= SLJIT_CONVI_FROMD);
FUNCTION_CHECK_FOP();
FUNCTION_FCHECK(src, srcw);
FUNCTION_CHECK_DST(dst, dstw);
@@ -1264,29 +1249,21 @@
fprintf(compiler->verbose, "\n");
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_fop1_convd_fromw(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fop1_convd_fromw(struct sljit_compiler *compiler, sljit_si op,
sljit_si dst, sljit_sw dstw,
sljit_si src, sljit_sw srcw)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(op);
- SLJIT_UNUSED_ARG(dst);
- SLJIT_UNUSED_ARG(dstw);
- SLJIT_UNUSED_ARG(src);
- SLJIT_UNUSED_ARG(srcw);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
if (SLJIT_UNLIKELY(compiler->skip_checks)) {
compiler->skip_checks = 0;
- return;
+ CHECK_RETURN_OK;
}
-#endif
- SLJIT_ASSERT(GET_OPCODE(op) >= SLJIT_CONVD_FROMW && GET_OPCODE(op) <= SLJIT_CONVD_FROMI);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(sljit_is_fpu_available());
+ CHECK_ARGUMENT(GET_OPCODE(op) >= SLJIT_CONVD_FROMW && GET_OPCODE(op) <= SLJIT_CONVD_FROMI);
FUNCTION_CHECK_FOP();
FUNCTION_CHECK_SRC(src, srcw);
FUNCTION_FCHECK(dst, dstw);
@@ -1302,26 +1279,17 @@
fprintf(compiler->verbose, "\n");
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_fop2(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fop2(struct sljit_compiler *compiler, sljit_si op,
sljit_si dst, sljit_sw dstw,
sljit_si src1, sljit_sw src1w,
sljit_si src2, sljit_sw src2w)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(op);
- SLJIT_UNUSED_ARG(dst);
- SLJIT_UNUSED_ARG(dstw);
- SLJIT_UNUSED_ARG(src1);
- SLJIT_UNUSED_ARG(src1w);
- SLJIT_UNUSED_ARG(src2);
- SLJIT_UNUSED_ARG(src2w);
-
- SLJIT_ASSERT(sljit_is_fpu_available());
- SLJIT_ASSERT(GET_OPCODE(op) >= SLJIT_ADDD && GET_OPCODE(op) <= SLJIT_DIVD);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(sljit_is_fpu_available());
+ CHECK_ARGUMENT(GET_OPCODE(op) >= SLJIT_DADD && GET_OPCODE(op) <= SLJIT_DDIV);
FUNCTION_CHECK_FOP();
FUNCTION_FCHECK(src1, src1w);
FUNCTION_FCHECK(src2, src2w);
@@ -1329,7 +1297,7 @@
#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
if (SLJIT_UNLIKELY(!!compiler->verbose)) {
- fprintf(compiler->verbose, " %s%s ", fop2_names[GET_OPCODE(op) - SLJIT_FOP2_BASE], (op & SLJIT_SINGLE_OP) ? "s" : "d");
+ fprintf(compiler->verbose, " %s%s ", (op & SLJIT_SINGLE_OP) ? "s" : "d", fop2_names[GET_OPCODE(op) - SLJIT_FOP2_BASE]);
sljit_verbose_fparam(compiler, dst, dstw);
fprintf(compiler->verbose, ", ");
sljit_verbose_fparam(compiler, src1, src1w);
@@ -1338,115 +1306,98 @@
fprintf(compiler->verbose, "\n");
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_label(struct sljit_compiler *compiler)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_label(struct sljit_compiler *compiler)
{
- /* If debug and verbose are disabled, all arguments are unused. */
SLJIT_UNUSED_ARG(compiler);
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
if (SLJIT_UNLIKELY(!!compiler->verbose))
fprintf(compiler->verbose, "label:\n");
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_jump(struct sljit_compiler *compiler, sljit_si type)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_jump(struct sljit_compiler *compiler, sljit_si type)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(type);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
if (SLJIT_UNLIKELY(compiler->skip_checks)) {
compiler->skip_checks = 0;
- return;
+ CHECK_RETURN_OK;
}
-#endif
- SLJIT_ASSERT(!(type & ~(0xff | SLJIT_REWRITABLE_JUMP)));
- SLJIT_ASSERT((type & 0xff) >= SLJIT_C_EQUAL && (type & 0xff) <= SLJIT_CALL3);
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(!(type & ~(0xff | SLJIT_REWRITABLE_JUMP | SLJIT_INT_OP)));
+ CHECK_ARGUMENT((type & 0xff) >= SLJIT_EQUAL && (type & 0xff) <= SLJIT_CALL3);
+ CHECK_ARGUMENT((type & 0xff) < SLJIT_JUMP || !(type & SLJIT_INT_OP));
+ CHECK_ARGUMENT((type & 0xff) <= SLJIT_CALL0 || ((type & 0xff) - SLJIT_CALL0) <= compiler->scratches);
+#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
if (SLJIT_UNLIKELY(!!compiler->verbose))
- fprintf(compiler->verbose, " jump%s.%s\n", !(type & SLJIT_REWRITABLE_JUMP) ? "" : ".r", jump_names[type & 0xff]);
+ fprintf(compiler->verbose, " jump%s.%s%s\n", !(type & SLJIT_REWRITABLE_JUMP) ? "" : ".r",
+ JUMP_PREFIX(type), jump_names[type & 0xff]);
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_cmp(struct sljit_compiler *compiler, sljit_si type,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_cmp(struct sljit_compiler *compiler, sljit_si type,
sljit_si src1, sljit_sw src1w,
sljit_si src2, sljit_sw src2w)
{
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(type);
- SLJIT_UNUSED_ARG(src1);
- SLJIT_UNUSED_ARG(src1w);
- SLJIT_UNUSED_ARG(src2);
- SLJIT_UNUSED_ARG(src2w);
-
- SLJIT_ASSERT(!(type & ~(0xff | SLJIT_REWRITABLE_JUMP | SLJIT_INT_OP)));
- SLJIT_ASSERT((type & 0xff) >= SLJIT_C_EQUAL && (type & 0xff) <= SLJIT_C_SIG_LESS_EQUAL);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(!(type & ~(0xff | SLJIT_REWRITABLE_JUMP | SLJIT_INT_OP)));
+ CHECK_ARGUMENT((type & 0xff) >= SLJIT_EQUAL && (type & 0xff) <= SLJIT_SIG_LESS_EQUAL);
FUNCTION_CHECK_SRC(src1, src1w);
FUNCTION_CHECK_SRC(src2, src2w);
#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
if (SLJIT_UNLIKELY(!!compiler->verbose)) {
- fprintf(compiler->verbose, " %scmp%s.%s ", !(type & SLJIT_INT_OP) ? "" : "i", !(type & SLJIT_REWRITABLE_JUMP) ? "" : ".r", jump_names[type & 0xff]);
+ fprintf(compiler->verbose, " cmp%s.%s%s ", !(type & SLJIT_REWRITABLE_JUMP) ? "" : ".r",
+ (type & SLJIT_INT_OP) ? "i_" : "", jump_names[type & 0xff]);
sljit_verbose_param(compiler, src1, src1w);
fprintf(compiler->verbose, ", ");
sljit_verbose_param(compiler, src2, src2w);
fprintf(compiler->verbose, "\n");
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_fcmp(struct sljit_compiler *compiler, sljit_si type,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fcmp(struct sljit_compiler *compiler, sljit_si type,
sljit_si src1, sljit_sw src1w,
sljit_si src2, sljit_sw src2w)
{
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(type);
- SLJIT_UNUSED_ARG(src1);
- SLJIT_UNUSED_ARG(src1w);
- SLJIT_UNUSED_ARG(src2);
- SLJIT_UNUSED_ARG(src2w);
-
- SLJIT_ASSERT(sljit_is_fpu_available());
- SLJIT_ASSERT(!(type & ~(0xff | SLJIT_REWRITABLE_JUMP | SLJIT_SINGLE_OP)));
- SLJIT_ASSERT((type & 0xff) >= SLJIT_C_FLOAT_EQUAL && (type & 0xff) <= SLJIT_C_FLOAT_ORDERED);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(sljit_is_fpu_available());
+ CHECK_ARGUMENT(!(type & ~(0xff | SLJIT_REWRITABLE_JUMP | SLJIT_SINGLE_OP)));
+ CHECK_ARGUMENT((type & 0xff) >= SLJIT_D_EQUAL && (type & 0xff) <= SLJIT_D_ORDERED);
FUNCTION_FCHECK(src1, src1w);
FUNCTION_FCHECK(src2, src2w);
#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
if (SLJIT_UNLIKELY(!!compiler->verbose)) {
- fprintf(compiler->verbose, " %scmp%s.%s ", (type & SLJIT_SINGLE_OP) ? "s" : "d",
- !(type & SLJIT_REWRITABLE_JUMP) ? "" : ".r", jump_names[type & 0xff]);
+ fprintf(compiler->verbose, " fcmp%s.%s%s ", !(type & SLJIT_REWRITABLE_JUMP) ? "" : ".r",
+ (type & SLJIT_SINGLE_OP) ? "s_" : "d_", jump_names[type & 0xff]);
sljit_verbose_fparam(compiler, src1, src1w);
fprintf(compiler->verbose, ", ");
sljit_verbose_fparam(compiler, src2, src2w);
fprintf(compiler->verbose, "\n");
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_ijump(struct sljit_compiler *compiler, sljit_si type, sljit_si src, sljit_sw srcw)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_ijump(struct sljit_compiler *compiler, sljit_si type, sljit_si src, sljit_sw srcw)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(type);
- SLJIT_UNUSED_ARG(src);
- SLJIT_UNUSED_ARG(srcw);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
if (SLJIT_UNLIKELY(compiler->skip_checks)) {
compiler->skip_checks = 0;
- return;
+ CHECK_RETURN_OK;
}
-#endif
- SLJIT_ASSERT(type >= SLJIT_JUMP && type <= SLJIT_CALL3);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(type >= SLJIT_JUMP && type <= SLJIT_CALL3);
+ CHECK_ARGUMENT(type <= SLJIT_CALL0 || (type - SLJIT_CALL0) <= compiler->scratches);
FUNCTION_CHECK_SRC(src, srcw);
#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
@@ -1456,38 +1407,31 @@
fprintf(compiler->verbose, "\n");
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_op_flags(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_op_flags(struct sljit_compiler *compiler, sljit_si op,
sljit_si dst, sljit_sw dstw,
sljit_si src, sljit_sw srcw,
sljit_si type)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(op);
- SLJIT_UNUSED_ARG(dst);
- SLJIT_UNUSED_ARG(dstw);
- SLJIT_UNUSED_ARG(src);
- SLJIT_UNUSED_ARG(srcw);
- SLJIT_UNUSED_ARG(type);
-
- SLJIT_ASSERT(type >= SLJIT_C_EQUAL && type < SLJIT_JUMP);
- SLJIT_ASSERT(op == SLJIT_MOV || GET_OPCODE(op) == SLJIT_MOV_UI || GET_OPCODE(op) == SLJIT_MOV_SI
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+ CHECK_ARGUMENT(!(type & ~(0xff | SLJIT_INT_OP)));
+ CHECK_ARGUMENT((type & 0xff) >= SLJIT_EQUAL && (type & 0xff) <= SLJIT_D_ORDERED);
+ CHECK_ARGUMENT(op == SLJIT_MOV || GET_OPCODE(op) == SLJIT_MOV_UI || GET_OPCODE(op) == SLJIT_MOV_SI
|| (GET_OPCODE(op) >= SLJIT_AND && GET_OPCODE(op) <= SLJIT_XOR));
- SLJIT_ASSERT((op & (SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C)) == 0);
- SLJIT_ASSERT((op & (SLJIT_SET_E | SLJIT_KEEP_FLAGS)) != (SLJIT_SET_E | SLJIT_KEEP_FLAGS));
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+ CHECK_ARGUMENT((op & (SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C)) == 0);
+ CHECK_ARGUMENT((op & (SLJIT_SET_E | SLJIT_KEEP_FLAGS)) != (SLJIT_SET_E | SLJIT_KEEP_FLAGS));
if (GET_OPCODE(op) < SLJIT_ADD) {
- SLJIT_ASSERT(src == SLJIT_UNUSED && srcw == 0);
+ CHECK_ARGUMENT(src == SLJIT_UNUSED && srcw == 0);
} else {
- SLJIT_ASSERT(src == dst && srcw == dstw);
+ CHECK_ARGUMENT(src == dst && srcw == dstw);
}
FUNCTION_CHECK_DST(dst, dstw);
#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
if (SLJIT_UNLIKELY(!!compiler->verbose)) {
- fprintf(compiler->verbose, " %sflags.%s%s%s ", !(op & SLJIT_INT_OP) ? "" : "i",
+ fprintf(compiler->verbose, " flags.%s%s%s%s ", !(op & SLJIT_INT_OP) ? "" : "i",
GET_OPCODE(op) >= SLJIT_OP2_BASE ? op2_names[GET_OPCODE(op) - SLJIT_OP2_BASE] : op1_names[GET_OPCODE(op) - SLJIT_OP1_BASE],
!(op & SLJIT_SET_E) ? "" : ".e", !(op & SLJIT_KEEP_FLAGS) ? "" : ".k");
sljit_verbose_param(compiler, dst, dstw);
@@ -1495,19 +1439,15 @@
fprintf(compiler->verbose, ", ");
sljit_verbose_param(compiler, src, srcw);
}
- fprintf(compiler->verbose, ", %s\n", jump_names[type]);
+ fprintf(compiler->verbose, ", %s%s\n", JUMP_PREFIX(type), jump_names[type & 0xff]);
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_get_local_base(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw offset)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_get_local_base(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw offset)
{
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(dst);
- SLJIT_UNUSED_ARG(dstw);
- SLJIT_UNUSED_ARG(offset);
-
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
FUNCTION_CHECK_DST(dst, dstw);
#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
@@ -1517,17 +1457,12 @@
fprintf(compiler->verbose, ", #%" SLJIT_PRINT_D "d\n", offset);
}
#endif
+ CHECK_RETURN_OK;
}
-static SLJIT_INLINE void check_sljit_emit_const(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw init_value)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_const(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw init_value)
{
- /* If debug and verbose are disabled, all arguments are unused. */
- SLJIT_UNUSED_ARG(compiler);
- SLJIT_UNUSED_ARG(dst);
- SLJIT_UNUSED_ARG(dstw);
- SLJIT_UNUSED_ARG(init_value);
-
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
FUNCTION_CHECK_DST(dst, dstw);
#endif
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
@@ -1537,8 +1472,36 @@
fprintf(compiler->verbose, ", #%" SLJIT_PRINT_D "d\n", init_value);
}
#endif
+ CHECK_RETURN_OK;
}
+#endif /* SLJIT_ARGUMENT_CHECKS || SLJIT_VERBOSE */
+
+#define SELECT_FOP1_OPERATION_WITH_CHECKS(compiler, op, dst, dstw, src, srcw) \
+ SLJIT_COMPILE_ASSERT(!(SLJIT_CONVW_FROMD & 0x1) && !(SLJIT_CONVD_FROMW & 0x1), \
+ invalid_float_opcodes); \
+ if (GET_OPCODE(op) >= SLJIT_CONVW_FROMD && GET_OPCODE(op) <= SLJIT_DCMP) { \
+ if (GET_OPCODE(op) == SLJIT_DCMP) { \
+ CHECK(check_sljit_emit_fop1_cmp(compiler, op, dst, dstw, src, srcw)); \
+ ADJUST_LOCAL_OFFSET(dst, dstw); \
+ ADJUST_LOCAL_OFFSET(src, srcw); \
+ return sljit_emit_fop1_cmp(compiler, op, dst, dstw, src, srcw); \
+ } \
+ if ((GET_OPCODE(op) | 0x1) == SLJIT_CONVI_FROMD) { \
+ CHECK(check_sljit_emit_fop1_convw_fromd(compiler, op, dst, dstw, src, srcw)); \
+ ADJUST_LOCAL_OFFSET(dst, dstw); \
+ ADJUST_LOCAL_OFFSET(src, srcw); \
+ return sljit_emit_fop1_convw_fromd(compiler, op, dst, dstw, src, srcw); \
+ } \
+ CHECK(check_sljit_emit_fop1_convd_fromw(compiler, op, dst, dstw, src, srcw)); \
+ ADJUST_LOCAL_OFFSET(dst, dstw); \
+ ADJUST_LOCAL_OFFSET(src, srcw); \
+ return sljit_emit_fop1_convd_fromw(compiler, op, dst, dstw, src, srcw); \
+ } \
+ CHECK(check_sljit_emit_fop1(compiler, op, dst, dstw, src, srcw)); \
+ ADJUST_LOCAL_OFFSET(dst, dstw); \
+ ADJUST_LOCAL_OFFSET(src, srcw);
+
static SLJIT_INLINE sljit_si emit_mov_before_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
{
/* Return if don't need to do anything. */
@@ -1554,7 +1517,8 @@
return SLJIT_SUCCESS;
#endif
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS) \
+ || (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
compiler->skip_checks = 1;
#endif
return sljit_emit_op1(compiler, op, SLJIT_RETURN_REG, 0, src, srcw);
@@ -1617,11 +1581,11 @@
sljit_sw tmp_srcw;
CHECK_ERROR_PTR();
- check_sljit_emit_cmp(compiler, type, src1, src1w, src2, src2w);
+ CHECK_PTR(check_sljit_emit_cmp(compiler, type, src1, src1w, src2, src2w));
condition = type & 0xff;
#if (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
- if ((condition == SLJIT_C_EQUAL || condition == SLJIT_C_NOT_EQUAL)) {
+ if ((condition == SLJIT_EQUAL || condition == SLJIT_NOT_EQUAL)) {
if ((src1 & SLJIT_IMM) && !src1w) {
src1 = src2;
src1w = src2w;
@@ -1636,29 +1600,29 @@
if (SLJIT_UNLIKELY((src1 & SLJIT_IMM) && !(src2 & SLJIT_IMM))) {
/* Immediate is prefered as second argument by most architectures. */
switch (condition) {
- case SLJIT_C_LESS:
- condition = SLJIT_C_GREATER;
+ case SLJIT_LESS:
+ condition = SLJIT_GREATER;
break;
- case SLJIT_C_GREATER_EQUAL:
- condition = SLJIT_C_LESS_EQUAL;
+ case SLJIT_GREATER_EQUAL:
+ condition = SLJIT_LESS_EQUAL;
break;
- case SLJIT_C_GREATER:
- condition = SLJIT_C_LESS;
+ case SLJIT_GREATER:
+ condition = SLJIT_LESS;
break;
- case SLJIT_C_LESS_EQUAL:
- condition = SLJIT_C_GREATER_EQUAL;
+ case SLJIT_LESS_EQUAL:
+ condition = SLJIT_GREATER_EQUAL;
break;
- case SLJIT_C_SIG_LESS:
- condition = SLJIT_C_SIG_GREATER;
+ case SLJIT_SIG_LESS:
+ condition = SLJIT_SIG_GREATER;
break;
- case SLJIT_C_SIG_GREATER_EQUAL:
- condition = SLJIT_C_SIG_LESS_EQUAL;
+ case SLJIT_SIG_GREATER_EQUAL:
+ condition = SLJIT_SIG_LESS_EQUAL;
break;
- case SLJIT_C_SIG_GREATER:
- condition = SLJIT_C_SIG_LESS;
+ case SLJIT_SIG_GREATER:
+ condition = SLJIT_SIG_LESS;
break;
- case SLJIT_C_SIG_LESS_EQUAL:
- condition = SLJIT_C_SIG_GREATER_EQUAL;
+ case SLJIT_SIG_LESS_EQUAL:
+ condition = SLJIT_SIG_GREATER_EQUAL;
break;
}
type = condition | (type & (SLJIT_INT_OP | SLJIT_REWRITABLE_JUMP));
@@ -1670,19 +1634,21 @@
src2w = tmp_srcw;
}
- if (condition <= SLJIT_C_NOT_ZERO)
+ if (condition <= SLJIT_NOT_ZERO)
flags = SLJIT_SET_E;
- else if (condition <= SLJIT_C_LESS_EQUAL)
+ else if (condition <= SLJIT_LESS_EQUAL)
flags = SLJIT_SET_U;
else
flags = SLJIT_SET_S;
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+ || (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
compiler->skip_checks = 1;
#endif
PTR_FAIL_IF(sljit_emit_op2(compiler, SLJIT_SUB | flags | (type & SLJIT_INT_OP),
SLJIT_UNUSED, 0, src1, src1w, src2, src2w));
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+ || (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
compiler->skip_checks = 1;
#endif
return sljit_emit_jump(compiler, condition | (type & SLJIT_REWRITABLE_JUMP));
@@ -1694,19 +1660,22 @@
{
sljit_si flags, condition;
- check_sljit_emit_fcmp(compiler, type, src1, src1w, src2, src2w);
+ CHECK_ERROR_PTR();
+ CHECK_PTR(check_sljit_emit_fcmp(compiler, type, src1, src1w, src2, src2w));
condition = type & 0xff;
- flags = (condition <= SLJIT_C_FLOAT_NOT_EQUAL) ? SLJIT_SET_E : SLJIT_SET_S;
+ flags = (condition <= SLJIT_D_NOT_EQUAL) ? SLJIT_SET_E : SLJIT_SET_S;
if (type & SLJIT_SINGLE_OP)
flags |= SLJIT_SINGLE_OP;
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+ || (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
compiler->skip_checks = 1;
#endif
- sljit_emit_fop1(compiler, SLJIT_CMPD | flags, src1, src1w, src2, src2w);
+ sljit_emit_fop1(compiler, SLJIT_DCMP | flags, src1, src1w, src2, src2w);
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+ || (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
compiler->skip_checks = 1;
#endif
return sljit_emit_jump(compiler, condition | (type & SLJIT_REWRITABLE_JUMP));
@@ -1719,10 +1688,11 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_local_base(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw offset)
{
CHECK_ERROR();
- check_sljit_get_local_base(compiler, dst, dstw, offset);
+ CHECK(check_sljit_get_local_base(compiler, dst, dstw, offset));
ADJUST_LOCAL_OFFSET(SLJIT_MEM1(SLJIT_SP), offset);
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+ || (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
compiler->skip_checks = 1;
#endif
if (offset != 0)
@@ -1799,7 +1769,7 @@
return SLJIT_ERR_UNSUPPORTED;
}
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
{
@@ -1812,6 +1782,7 @@
SLJIT_UNUSED_ARG(fsaveds);
SLJIT_UNUSED_ARG(local_size);
SLJIT_ASSERT_STOP();
+ return SLJIT_ERR_UNSUPPORTED;
}
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
diff --git a/dist/sljit/sljitLir.h b/dist/sljit/sljitLir.h
index 9718871..24c0f60 100644
--- a/dist/sljit/sljitLir.h
+++ b/dist/sljit/sljitLir.h
@@ -95,8 +95,10 @@
/* Cannot allocate executable memory.
Only for sljit_generate_code() */
#define SLJIT_ERR_EX_ALLOC_FAILED 3
-/* return value for SLJIT_CONFIG_UNSUPPORTED empty architecture. */
+/* Return value for SLJIT_CONFIG_UNSUPPORTED placeholder architecture. */
#define SLJIT_ERR_UNSUPPORTED 4
+/* An ivalid argument is passed to any SLJIT function. */
+#define SLJIT_ERR_BAD_ARGUMENT 5
/* --------------------------------------------------------------------- */
/* Registers */
@@ -305,6 +307,7 @@
struct sljit_jump *last_jump;
struct sljit_const *last_const;
+ void *allocator_data;
struct sljit_memory_fragment *buf;
struct sljit_memory_fragment *abuf;
@@ -359,7 +362,6 @@
#endif
#if (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
- sljit_si locals_offset;
sljit_si cache_arg;
sljit_sw cache_argw;
#endif
@@ -391,12 +393,15 @@
FILE* verbose;
#endif
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS) \
+ || (defined SLJIT_DEBUG && SLJIT_DEBUG)
/* Local size passed to the functions. */
sljit_si logical_local_size;
#endif
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS) \
+ || (defined SLJIT_DEBUG && SLJIT_DEBUG) \
+ || (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
sljit_si skip_checks;
#endif
};
@@ -405,11 +410,16 @@
/* Main functions */
/* --------------------------------------------------------------------- */
-/* Creates an sljit compiler.
- Returns NULL if failed. */
-SLJIT_API_FUNC_ATTRIBUTE struct sljit_compiler* sljit_create_compiler(void);
+/* Creates an sljit compiler. The allocator_data is required by some
+ custom memory managers. This pointer is passed to SLJIT_MALLOC
+ and SLJIT_FREE macros. Most allocators (including the default
+ one) ignores this value, and it is recommended to pass NULL
+ as a dummy value for allocator_data.
-/* Free everything except the compiled machine code. */
+ Returns NULL if failed. */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_compiler* sljit_create_compiler(void *allocator_data);
+
+/* Frees everything except the compiled machine code. */
SLJIT_API_FUNC_ATTRIBUTE void sljit_free_compiler(struct sljit_compiler *compiler);
/* Returns the current error code. If an error is occurred, future sljit
@@ -419,6 +429,14 @@
these checks increases the performance of the compiling process. */
static SLJIT_INLINE sljit_si sljit_get_compiler_error(struct sljit_compiler *compiler) { return compiler->error; }
+/* Sets the compiler error code to SLJIT_ERR_ALLOC_FAILED except
+ if an error was detected before. After the error code is set
+ the compiler behaves as if the allocation failure happened
+ during an sljit function call. This can greatly simplify error
+ checking, since only the compiler status needs to be checked
+ after the compilation. */
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_compiler_memory_error(struct sljit_compiler *compiler);
+
/*
Allocate a small amount of memory. The size must be <= 64 bytes on 32 bit,
and <= 128 bytes on 64 bit architectures. The memory area is owned by the
@@ -461,8 +479,8 @@
sljit_emit_enter function emits the necessary instructions for
setting up a new context for the executable code and moves function
arguments to the saved registers. Furthermore the options argument
- can be used to pass configuration options to the compiler. Currently
- there are no options, so it must be set to 0.
+ can be used to pass configuration options to the compiler. The
+ available options are listed before sljit_emit_enter.
The number of sljit_sw arguments passed to the generated function
are specified in the "args" parameter. The number of arguments must
@@ -493,6 +511,11 @@
overwrites the previous context.
*/
+/* The absolute address returned by sljit_get_local_base with
+offset 0 is aligned to sljit_d. Otherwise it is aligned to sljit_uw. */
+#define SLJIT_DOUBLE_ALIGNMENT 0x00000001
+
+/* The local_size must be >= 0 and <= SLJIT_MAX_LOCAL_SIZE. */
#define SLJIT_MAX_LOCAL_SIZE 65536
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_enter(struct sljit_compiler *compiler,
@@ -509,7 +532,7 @@
Note: every call of sljit_emit_enter and sljit_set_context overwrites
the previous context. */
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
sljit_si fscratches, sljit_si fsaveds, sljit_si local_size);
@@ -674,23 +697,23 @@
/* Flags: - (may destroy flags)
Unsigned multiplication of SLJIT_R0 and SLJIT_R1.
Result goes to SLJIT_R1:SLJIT_R0 (high:low) word */
-#define SLJIT_UMUL (SLJIT_OP0_BASE + 2)
+#define SLJIT_LUMUL (SLJIT_OP0_BASE + 2)
/* Flags: - (may destroy flags)
Signed multiplication of SLJIT_R0 and SLJIT_R1.
Result goes to SLJIT_R1:SLJIT_R0 (high:low) word */
-#define SLJIT_SMUL (SLJIT_OP0_BASE + 3)
+#define SLJIT_LSMUL (SLJIT_OP0_BASE + 3)
/* Flags: I - (may destroy flags)
Unsigned divide of the value in SLJIT_R0 by the value in SLJIT_R1.
The result is placed in SLJIT_R0 and the remainder goes to SLJIT_R1.
Note: if SLJIT_R1 contains 0, the behaviour is undefined. */
-#define SLJIT_UDIV (SLJIT_OP0_BASE + 4)
-#define SLJIT_IUDIV (SLJIT_UDIV | SLJIT_INT_OP)
+#define SLJIT_LUDIV (SLJIT_OP0_BASE + 4)
+#define SLJIT_ILUDIV (SLJIT_LUDIV | SLJIT_INT_OP)
/* Flags: I - (may destroy flags)
Signed divide of the value in SLJIT_R0 by the value in SLJIT_R1.
The result is placed in SLJIT_R0 and the remainder goes to SLJIT_R1.
Note: if SLJIT_R1 contains 0, the behaviour is undefined. */
-#define SLJIT_SDIV (SLJIT_OP0_BASE + 5)
-#define SLJIT_ISDIV (SLJIT_SDIV | SLJIT_INT_OP)
+#define SLJIT_LSDIV (SLJIT_OP0_BASE + 5)
+#define SLJIT_ILSDIV (SLJIT_LSDIV | SLJIT_INT_OP)
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op);
@@ -838,7 +861,7 @@
/* The following function is a helper function for sljit_emit_op_custom.
It returns with the real machine register index of any SLJIT_FLOAT register.
-
+
Note: the index is always an even number on ARM (except ARM-64), MIPS, and SPARC. */
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg);
@@ -864,8 +887,8 @@
#define SLJIT_FOP1_BASE 128
/* Flags: SP - (never set any flags) */
-#define SLJIT_MOVD (SLJIT_FOP1_BASE + 0)
-#define SLJIT_MOVS (SLJIT_MOVD | SLJIT_SINGLE_OP)
+#define SLJIT_DMOV (SLJIT_FOP1_BASE + 0)
+#define SLJIT_SMOV (SLJIT_DMOV | SLJIT_SINGLE_OP)
/* Convert opcodes: CONV[DST_TYPE].FROM[SRC_TYPE]
SRC/DST TYPE can be: D - double, S - single, W - signed word, I - signed int
Rounding mode when the destination is W or I: round towards zero. */
@@ -888,14 +911,14 @@
Note: NaN check is always performed. If SLJIT_C_FLOAT_UNORDERED flag
is set, the comparison result is unpredictable.
Flags: SP | E | S (see SLJIT_C_FLOAT_*) */
-#define SLJIT_CMPD (SLJIT_FOP1_BASE + 6)
-#define SLJIT_CMPS (SLJIT_CMPD | SLJIT_SINGLE_OP)
+#define SLJIT_DCMP (SLJIT_FOP1_BASE + 6)
+#define SLJIT_SCMP (SLJIT_DCMP | SLJIT_SINGLE_OP)
/* Flags: SP - (never set any flags) */
-#define SLJIT_NEGD (SLJIT_FOP1_BASE + 7)
-#define SLJIT_NEGS (SLJIT_NEGD | SLJIT_SINGLE_OP)
+#define SLJIT_DNEG (SLJIT_FOP1_BASE + 7)
+#define SLJIT_SNEG (SLJIT_DNEG | SLJIT_SINGLE_OP)
/* Flags: SP - (never set any flags) */
-#define SLJIT_ABSD (SLJIT_FOP1_BASE + 8)
-#define SLJIT_ABSS (SLJIT_ABSD | SLJIT_SINGLE_OP)
+#define SLJIT_DABS (SLJIT_FOP1_BASE + 8)
+#define SLJIT_SABS (SLJIT_DABS | SLJIT_SINGLE_OP)
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compiler, sljit_si op,
sljit_si dst, sljit_sw dstw,
@@ -905,17 +928,17 @@
#define SLJIT_FOP2_BASE 160
/* Flags: SP - (never set any flags) */
-#define SLJIT_ADDD (SLJIT_FOP2_BASE + 0)
-#define SLJIT_ADDS (SLJIT_ADDD | SLJIT_SINGLE_OP)
+#define SLJIT_DADD (SLJIT_FOP2_BASE + 0)
+#define SLJIT_SADD (SLJIT_DADD | SLJIT_SINGLE_OP)
/* Flags: SP - (never set any flags) */
-#define SLJIT_SUBD (SLJIT_FOP2_BASE + 1)
-#define SLJIT_SUBS (SLJIT_SUBD | SLJIT_SINGLE_OP)
+#define SLJIT_DSUB (SLJIT_FOP2_BASE + 1)
+#define SLJIT_SSUB (SLJIT_DSUB | SLJIT_SINGLE_OP)
/* Flags: SP - (never set any flags) */
-#define SLJIT_MULD (SLJIT_FOP2_BASE + 2)
-#define SLJIT_MULS (SLJIT_MULD | SLJIT_SINGLE_OP)
+#define SLJIT_DMUL (SLJIT_FOP2_BASE + 2)
+#define SLJIT_SMUL (SLJIT_DMUL | SLJIT_SINGLE_OP)
/* Flags: SP - (never set any flags) */
-#define SLJIT_DIVD (SLJIT_FOP2_BASE + 3)
-#define SLJIT_DIVS (SLJIT_DIVD | SLJIT_SINGLE_OP)
+#define SLJIT_DDIV (SLJIT_FOP2_BASE + 3)
+#define SLJIT_SDIV (SLJIT_DDIV | SLJIT_SINGLE_OP)
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compiler, sljit_si op,
sljit_si dst, sljit_sw dstw,
@@ -926,36 +949,64 @@
SLJIT_API_FUNC_ATTRIBUTE struct sljit_label* sljit_emit_label(struct sljit_compiler *compiler);
-/* Invert conditional instruction: xor (^) with 0x1 */
-#define SLJIT_C_EQUAL 0
-#define SLJIT_C_ZERO 0
-#define SLJIT_C_NOT_EQUAL 1
-#define SLJIT_C_NOT_ZERO 1
+/* Invert (negate) conditional type: xor (^) with 0x1 */
-#define SLJIT_C_LESS 2
-#define SLJIT_C_GREATER_EQUAL 3
-#define SLJIT_C_GREATER 4
-#define SLJIT_C_LESS_EQUAL 5
-#define SLJIT_C_SIG_LESS 6
-#define SLJIT_C_SIG_GREATER_EQUAL 7
-#define SLJIT_C_SIG_GREATER 8
-#define SLJIT_C_SIG_LESS_EQUAL 9
+/* Integer comparison types. */
+#define SLJIT_EQUAL 0
+#define SLJIT_I_EQUAL (SLJIT_EQUAL | SLJIT_INT_OP)
+#define SLJIT_ZERO 0
+#define SLJIT_I_ZERO (SLJIT_ZERO | SLJIT_INT_OP)
+#define SLJIT_NOT_EQUAL 1
+#define SLJIT_I_NOT_EQUAL (SLJIT_NOT_EQUAL | SLJIT_INT_OP)
+#define SLJIT_NOT_ZERO 1
+#define SLJIT_I_NOT_ZERO (SLJIT_NOT_ZERO | SLJIT_INT_OP)
-#define SLJIT_C_OVERFLOW 10
-#define SLJIT_C_NOT_OVERFLOW 11
+#define SLJIT_LESS 2
+#define SLJIT_I_LESS (SLJIT_LESS | SLJIT_INT_OP)
+#define SLJIT_GREATER_EQUAL 3
+#define SLJIT_I_GREATER_EQUAL (SLJIT_GREATER_EQUAL | SLJIT_INT_OP)
+#define SLJIT_GREATER 4
+#define SLJIT_I_GREATER (SLJIT_GREATER | SLJIT_INT_OP)
+#define SLJIT_LESS_EQUAL 5
+#define SLJIT_I_LESS_EQUAL (SLJIT_LESS_EQUAL | SLJIT_INT_OP)
+#define SLJIT_SIG_LESS 6
+#define SLJIT_I_SIG_LESS (SLJIT_SIG_LESS | SLJIT_INT_OP)
+#define SLJIT_SIG_GREATER_EQUAL 7
+#define SLJIT_I_SIG_GREATER_EQUAL (SLJIT_SIG_GREATER_EQUAL | SLJIT_INT_OP)
+#define SLJIT_SIG_GREATER 8
+#define SLJIT_I_SIG_GREATER (SLJIT_SIG_GREATER | SLJIT_INT_OP)
+#define SLJIT_SIG_LESS_EQUAL 9
+#define SLJIT_I_SIG_LESS_EQUAL (SLJIT_SIG_LESS_EQUAL | SLJIT_INT_OP)
-#define SLJIT_C_MUL_OVERFLOW 12
-#define SLJIT_C_MUL_NOT_OVERFLOW 13
+#define SLJIT_OVERFLOW 10
+#define SLJIT_I_OVERFLOW (SLJIT_OVERFLOW | SLJIT_INT_OP)
+#define SLJIT_NOT_OVERFLOW 11
+#define SLJIT_I_NOT_OVERFLOW (SLJIT_NOT_OVERFLOW | SLJIT_INT_OP)
-#define SLJIT_C_FLOAT_EQUAL 14
-#define SLJIT_C_FLOAT_NOT_EQUAL 15
-#define SLJIT_C_FLOAT_LESS 16
-#define SLJIT_C_FLOAT_GREATER_EQUAL 17
-#define SLJIT_C_FLOAT_GREATER 18
-#define SLJIT_C_FLOAT_LESS_EQUAL 19
-#define SLJIT_C_FLOAT_UNORDERED 20
-#define SLJIT_C_FLOAT_ORDERED 21
+#define SLJIT_MUL_OVERFLOW 12
+#define SLJIT_I_MUL_OVERFLOW (SLJIT_MUL_OVERFLOW | SLJIT_INT_OP)
+#define SLJIT_MUL_NOT_OVERFLOW 13
+#define SLJIT_I_MUL_NOT_OVERFLOW (SLJIT_MUL_NOT_OVERFLOW | SLJIT_INT_OP)
+/* Floating point comparison types. */
+#define SLJIT_D_EQUAL 14
+#define SLJIT_S_EQUAL (SLJIT_D_EQUAL | SLJIT_SINGLE_OP)
+#define SLJIT_D_NOT_EQUAL 15
+#define SLJIT_S_NOT_EQUAL (SLJIT_D_NOT_EQUAL | SLJIT_SINGLE_OP)
+#define SLJIT_D_LESS 16
+#define SLJIT_S_LESS (SLJIT_D_LESS | SLJIT_SINGLE_OP)
+#define SLJIT_D_GREATER_EQUAL 17
+#define SLJIT_S_GREATER_EQUAL (SLJIT_D_GREATER_EQUAL | SLJIT_SINGLE_OP)
+#define SLJIT_D_GREATER 18
+#define SLJIT_S_GREATER (SLJIT_D_GREATER | SLJIT_SINGLE_OP)
+#define SLJIT_D_LESS_EQUAL 19
+#define SLJIT_S_LESS_EQUAL (SLJIT_D_LESS_EQUAL | SLJIT_SINGLE_OP)
+#define SLJIT_D_UNORDERED 20
+#define SLJIT_S_UNORDERED (SLJIT_D_UNORDERED | SLJIT_SINGLE_OP)
+#define SLJIT_D_ORDERED 21
+#define SLJIT_S_ORDERED (SLJIT_D_ORDERED | SLJIT_SINGLE_OP)
+
+/* Unconditional jump types. */
#define SLJIT_JUMP 22
#define SLJIT_FAST_CALL 23
#define SLJIT_CALL0 24
@@ -969,7 +1020,7 @@
#define SLJIT_REWRITABLE_JUMP 0x1000
/* Emit a jump instruction. The destination is not set, only the type of the jump.
- type must be between SLJIT_C_EQUAL and SLJIT_CALL3
+ type must be between SLJIT_EQUAL and SLJIT_CALL3
type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP
Flags: - (never set any flags) for both conditional and unconditional jumps.
Flags: destroy all flags for calls. */
@@ -978,10 +1029,10 @@
/* Basic arithmetic comparison. In most architectures it is implemented as
an SLJIT_SUB operation (with SLJIT_UNUSED destination and setting
appropriate flags) followed by a sljit_emit_jump. However some
- architectures (i.e: MIPS) may employ special optimizations here. It is
- suggested to use this comparison form when appropriate.
- type must be between SLJIT_C_EQUAL and SLJIT_C_SIG_LESS_EQUAL
- type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP or SLJIT_INT_OP
+ architectures (i.e: ARM64 or MIPS) may employ special optimizations here.
+ It is suggested to use this comparison form when appropriate.
+ type must be between SLJIT_EQUAL and SLJIT_I_SIG_LESS_EQUAL
+ type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP
Flags: destroy flags. */
SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_cmp(struct sljit_compiler *compiler, sljit_si type,
sljit_si src1, sljit_sw src1w,
@@ -992,11 +1043,11 @@
sljit_emit_jump. However some architectures (i.e: MIPS) may employ
special optimizations here. It is suggested to use this comparison form
when appropriate.
- type must be between SLJIT_C_FLOAT_EQUAL and SLJIT_C_FLOAT_ORDERED
- type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP and SLJIT_SINGLE_OP
+ type must be between SLJIT_D_EQUAL and SLJIT_S_ORDERED
+ type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP
Flags: destroy flags.
Note: if either operand is NaN, the behaviour is undefined for
- type <= SLJIT_C_FLOAT_LESS_EQUAL. */
+ types up to SLJIT_S_LESS_EQUAL. */
SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_fcmp(struct sljit_compiler *compiler, sljit_si type,
sljit_si src1, sljit_sw src1w,
sljit_si src2, sljit_sw src2w);
@@ -1015,8 +1066,8 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_ijump(struct sljit_compiler *compiler, sljit_si type, sljit_si src, sljit_sw srcw);
/* Perform the operation using the conditional flags as the second argument.
- Type must always be between SLJIT_C_EQUAL and SLJIT_C_FLOAT_ORDERED. The
- value represented by the type is 1, if the condition represented by the type
+ Type must always be between SLJIT_EQUAL and SLJIT_S_ORDERED. The value
+ represented by the type is 1, if the condition represented by the type
is fulfilled, and 0 otherwise.
If op == SLJIT_MOV, SLJIT_MOV_SI, SLJIT_MOV_UI:
@@ -1058,7 +1109,7 @@
/* --------------------------------------------------------------------- */
#define SLJIT_MAJOR_VERSION 0
-#define SLJIT_MINOR_VERSION 92
+#define SLJIT_MINOR_VERSION 93
/* Get the human readable name of the platform. Can be useful on platforms
like ARM, where ARM and Thumb2 functions can be mixed, and
@@ -1104,10 +1155,11 @@
};
/* Returns NULL if unsuccessful.
- Note: limit and max_limit contains the size for stack allocation
- Note: the top field is initialized to base. */
-SLJIT_API_FUNC_ATTRIBUTE struct sljit_stack* SLJIT_CALL sljit_allocate_stack(sljit_uw limit, sljit_uw max_limit);
-SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_free_stack(struct sljit_stack* stack);
+ Note: limit and max_limit contains the size for stack allocation.
+ Note: the top field is initialized to base.
+ Note: see sljit_create_compiler for the explanation of allocator_data. */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_stack* SLJIT_CALL sljit_allocate_stack(sljit_uw limit, sljit_uw max_limit, void *allocator_data);
+SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_free_stack(struct sljit_stack *stack, void *allocator_data);
/* Can be used to increase (allocate) or decrease (free) the memory area.
Returns with a non-zero value if unsuccessful. If new_limit is greater than
@@ -1115,7 +1167,7 @@
since the growth ratio can be added to the current limit, and sljit_stack_resize
will do all the necessary checks. The fields of the stack are not changed if
sljit_stack_resize fails. */
-SLJIT_API_FUNC_ATTRIBUTE sljit_sw SLJIT_CALL sljit_stack_resize(struct sljit_stack* stack, sljit_uw new_limit);
+SLJIT_API_FUNC_ATTRIBUTE sljit_sw SLJIT_CALL sljit_stack_resize(struct sljit_stack *stack, sljit_uw new_limit);
#endif /* (defined SLJIT_UTIL_STACK && SLJIT_UTIL_STACK) */
diff --git a/dist/sljit/sljitNativeARM_32.c b/dist/sljit/sljitNativeARM_32.c
index 0998423..aca1d31 100644
--- a/dist/sljit/sljitNativeARM_32.c
+++ b/dist/sljit/sljitNativeARM_32.c
@@ -315,11 +315,13 @@
sljit_si value;
};
-static SLJIT_INLINE sljit_si resolve_const_pool_index(struct future_patch **first_patch, sljit_uw cpool_current_index, sljit_uw *cpool_start_address, sljit_uw *buf_ptr)
+static sljit_si resolve_const_pool_index(struct sljit_compiler *compiler, struct future_patch **first_patch, sljit_uw cpool_current_index, sljit_uw *cpool_start_address, sljit_uw *buf_ptr)
{
sljit_si value;
struct future_patch *curr_patch, *prev_patch;
+ SLJIT_UNUSED_ARG(compiler);
+
/* Using the values generated by patch_pc_relative_loads. */
if (!*first_patch)
value = (sljit_si)cpool_start_address[cpool_current_index];
@@ -337,7 +339,7 @@
prev_patch->next = curr_patch->next;
else
*first_patch = curr_patch->next;
- SLJIT_FREE(curr_patch);
+ SLJIT_FREE(curr_patch, compiler->allocator_data);
break;
}
prev_patch = curr_patch;
@@ -347,12 +349,12 @@
if (value >= 0) {
if ((sljit_uw)value > cpool_current_index) {
- curr_patch = (struct future_patch*)SLJIT_MALLOC(sizeof(struct future_patch));
+ curr_patch = (struct future_patch*)SLJIT_MALLOC(sizeof(struct future_patch), compiler->allocator_data);
if (!curr_patch) {
while (*first_patch) {
curr_patch = *first_patch;
*first_patch = (*first_patch)->next;
- SLJIT_FREE(curr_patch);
+ SLJIT_FREE(curr_patch, compiler->allocator_data);
}
return SLJIT_ERR_ALLOC_FAILED;
}
@@ -574,7 +576,7 @@
struct sljit_const *const_;
CHECK_ERROR_PTR();
- check_sljit_generate_code(compiler);
+ CHECK_PTR(check_sljit_generate_code(compiler));
reverse_buf(compiler);
/* Second code generation pass. */
@@ -623,7 +625,7 @@
cpool_skip_alignment--;
}
else {
- if (SLJIT_UNLIKELY(resolve_const_pool_index(&first_patch, cpool_current_index, cpool_start_address, buf_ptr))) {
+ if (SLJIT_UNLIKELY(resolve_const_pool_index(compiler, &first_patch, cpool_current_index, cpool_start_address, buf_ptr))) {
SLJIT_FREE_EXEC(code);
compiler->error = SLJIT_ERR_ALLOC_FAILED;
return NULL;
@@ -713,7 +715,7 @@
buf_end = buf_ptr + compiler->cpool_fill;
cpool_current_index = 0;
while (buf_ptr < buf_end) {
- if (SLJIT_UNLIKELY(resolve_const_pool_index(&first_patch, cpool_current_index, cpool_start_address, buf_ptr))) {
+ if (SLJIT_UNLIKELY(resolve_const_pool_index(compiler, &first_patch, cpool_current_index, cpool_start_address, buf_ptr))) {
SLJIT_FREE_EXEC(code);
compiler->error = SLJIT_ERR_ALLOC_FAILED;
return NULL;
@@ -831,16 +833,8 @@
sljit_uw push;
CHECK_ERROR();
- check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
+ CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
/* Push saved registers, temporary registers
stmdb sp!, {..., lr} */
@@ -872,26 +866,19 @@
return SLJIT_SUCCESS;
}
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
{
sljit_si size;
- CHECK_ERROR_VOID();
- check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
+ CHECK_ERROR();
+ CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
size = GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1);
compiler->local_size = ((size + local_size + 7) & ~7) - size;
+ return SLJIT_SUCCESS;
}
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
@@ -900,7 +887,7 @@
sljit_uw pop;
CHECK_ERROR();
- check_sljit_emit_return(compiler, op, src, srcw);
+ CHECK(check_sljit_emit_return(compiler, op, src, srcw));
FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
@@ -1820,7 +1807,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op)
{
CHECK_ERROR();
- check_sljit_emit_op0(compiler, op);
+ CHECK(check_sljit_emit_op0(compiler, op));
op = GET_OPCODE(op);
switch (op) {
@@ -1830,29 +1817,29 @@
case SLJIT_NOP:
FAIL_IF(push_inst(compiler, NOP));
break;
- case SLJIT_UMUL:
- case SLJIT_SMUL:
+ case SLJIT_LUMUL:
+ case SLJIT_LSMUL:
#if (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7)
- return push_inst(compiler, (op == SLJIT_UMUL ? UMULL : SMULL)
+ return push_inst(compiler, (op == SLJIT_LUMUL ? UMULL : SMULL)
| (reg_map[SLJIT_R1] << 16)
| (reg_map[SLJIT_R0] << 12)
| (reg_map[SLJIT_R0] << 8)
| reg_map[SLJIT_R1]);
#else
FAIL_IF(push_inst(compiler, EMIT_DATA_PROCESS_INS(MOV_DP, 0, TMP_REG1, SLJIT_UNUSED, RM(SLJIT_R1))));
- return push_inst(compiler, (op == SLJIT_UMUL ? UMULL : SMULL)
+ return push_inst(compiler, (op == SLJIT_LUMUL ? UMULL : SMULL)
| (reg_map[SLJIT_R1] << 16)
| (reg_map[SLJIT_R0] << 12)
| (reg_map[SLJIT_R0] << 8)
| reg_map[TMP_REG1]);
#endif
- case SLJIT_UDIV:
- case SLJIT_SDIV:
+ case SLJIT_LUDIV:
+ case SLJIT_LSDIV:
if (compiler->scratches >= 3)
FAIL_IF(push_inst(compiler, 0xe52d2008 /* str r2, [sp, #-8]! */));
#if defined(__GNUC__)
FAIL_IF(sljit_emit_ijump(compiler, SLJIT_FAST_CALL, SLJIT_IMM,
- (op == SLJIT_UDIV ? SLJIT_FUNC_OFFSET(__aeabi_uidivmod) : SLJIT_FUNC_OFFSET(__aeabi_idivmod))));
+ (op == SLJIT_LUDIV ? SLJIT_FUNC_OFFSET(__aeabi_uidivmod) : SLJIT_FUNC_OFFSET(__aeabi_idivmod))));
#else
#error "Software divmod functions are needed"
#endif
@@ -1869,7 +1856,7 @@
sljit_si src, sljit_sw srcw)
{
CHECK_ERROR();
- check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+ CHECK(check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src, srcw);
@@ -1914,7 +1901,8 @@
return emit_op(compiler, op, ALLOW_ANY_IMM, dst, dstw, TMP_REG1, 0, src, srcw);
case SLJIT_NEG:
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+ || (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
compiler->skip_checks = 1;
#endif
return sljit_emit_op2(compiler, SLJIT_SUB | GET_ALL_FLAGS(op), dst, dstw, SLJIT_IMM, 0, src, srcw);
@@ -1932,7 +1920,7 @@
sljit_si src2, sljit_sw src2w)
{
CHECK_ERROR();
- check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+ CHECK(check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src1, src1w);
ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1970,13 +1958,13 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg)
{
- check_sljit_get_register_index(reg);
+ CHECK_REG_INDEX(check_sljit_get_register_index(reg));
return reg_map[reg];
}
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg)
{
- check_sljit_get_float_register_index(reg);
+ CHECK_REG_INDEX(check_sljit_get_float_register_index(reg));
return reg << 1;
}
@@ -1984,8 +1972,7 @@
void *instruction, sljit_si size)
{
CHECK_ERROR();
- check_sljit_emit_op_custom(compiler, instruction, size);
- SLJIT_ASSERT(size == 4);
+ CHECK(check_sljit_emit_op_custom(compiler, instruction, size));
return push_inst(compiler, *(sljit_uw*)instruction);
}
@@ -2188,7 +2175,7 @@
}
switch (GET_OPCODE(op)) {
- case SLJIT_MOVD:
+ case SLJIT_DMOV:
if (src != dst_r) {
if (dst_r != TMP_FREG1)
FAIL_IF(push_inst(compiler, EMIT_FPU_OPERATION(VMOV_F32, op & SLJIT_SINGLE_OP, dst_r, src, 0)));
@@ -2196,10 +2183,10 @@
dst_r = src;
}
break;
- case SLJIT_NEGD:
+ case SLJIT_DNEG:
FAIL_IF(push_inst(compiler, EMIT_FPU_OPERATION(VNEG_F32, op & SLJIT_SINGLE_OP, dst_r, src, 0)));
break;
- case SLJIT_ABSD:
+ case SLJIT_DABS:
FAIL_IF(push_inst(compiler, EMIT_FPU_OPERATION(VABS_F32, op & SLJIT_SINGLE_OP, dst_r, src, 0)));
break;
case SLJIT_CONVD_FROMS:
@@ -2221,7 +2208,7 @@
sljit_si dst_r;
CHECK_ERROR();
- check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+ CHECK(check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src1, src1w);
ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -2243,19 +2230,19 @@
}
switch (GET_OPCODE(op)) {
- case SLJIT_ADDD:
+ case SLJIT_DADD:
FAIL_IF(push_inst(compiler, EMIT_FPU_OPERATION(VADD_F32, op & SLJIT_SINGLE_OP, dst_r, src2, src1)));
break;
- case SLJIT_SUBD:
+ case SLJIT_DSUB:
FAIL_IF(push_inst(compiler, EMIT_FPU_OPERATION(VSUB_F32, op & SLJIT_SINGLE_OP, dst_r, src2, src1)));
break;
- case SLJIT_MULD:
+ case SLJIT_DMUL:
FAIL_IF(push_inst(compiler, EMIT_FPU_OPERATION(VMUL_F32, op & SLJIT_SINGLE_OP, dst_r, src2, src1)));
break;
- case SLJIT_DIVD:
+ case SLJIT_DDIV:
FAIL_IF(push_inst(compiler, EMIT_FPU_OPERATION(VDIV_F32, op & SLJIT_SINGLE_OP, dst_r, src2, src1)));
break;
}
@@ -2277,7 +2264,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
{
CHECK_ERROR();
- check_sljit_emit_fast_enter(compiler, dst, dstw);
+ CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
ADJUST_LOCAL_OFFSET(dst, dstw);
/* For UNUSED dst. Uncommon, but possible. */
@@ -2300,7 +2287,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
{
CHECK_ERROR();
- check_sljit_emit_fast_return(compiler, src, srcw);
+ CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
ADJUST_LOCAL_OFFSET(src, srcw);
if (FAST_IS_REG(src))
@@ -2327,53 +2314,54 @@
static sljit_uw get_cc(sljit_si type)
{
switch (type) {
- case SLJIT_C_EQUAL:
- case SLJIT_C_MUL_NOT_OVERFLOW:
- case SLJIT_C_FLOAT_EQUAL:
+ case SLJIT_EQUAL:
+ case SLJIT_MUL_NOT_OVERFLOW:
+ case SLJIT_D_EQUAL:
return 0x00000000;
- case SLJIT_C_NOT_EQUAL:
- case SLJIT_C_MUL_OVERFLOW:
- case SLJIT_C_FLOAT_NOT_EQUAL:
+ case SLJIT_NOT_EQUAL:
+ case SLJIT_MUL_OVERFLOW:
+ case SLJIT_D_NOT_EQUAL:
return 0x10000000;
- case SLJIT_C_LESS:
- case SLJIT_C_FLOAT_LESS:
+ case SLJIT_LESS:
+ case SLJIT_D_LESS:
return 0x30000000;
- case SLJIT_C_GREATER_EQUAL:
- case SLJIT_C_FLOAT_GREATER_EQUAL:
+ case SLJIT_GREATER_EQUAL:
+ case SLJIT_D_GREATER_EQUAL:
return 0x20000000;
- case SLJIT_C_GREATER:
- case SLJIT_C_FLOAT_GREATER:
+ case SLJIT_GREATER:
+ case SLJIT_D_GREATER:
return 0x80000000;
- case SLJIT_C_LESS_EQUAL:
- case SLJIT_C_FLOAT_LESS_EQUAL:
+ case SLJIT_LESS_EQUAL:
+ case SLJIT_D_LESS_EQUAL:
return 0x90000000;
- case SLJIT_C_SIG_LESS:
+ case SLJIT_SIG_LESS:
return 0xb0000000;
- case SLJIT_C_SIG_GREATER_EQUAL:
+ case SLJIT_SIG_GREATER_EQUAL:
return 0xa0000000;
- case SLJIT_C_SIG_GREATER:
+ case SLJIT_SIG_GREATER:
return 0xc0000000;
- case SLJIT_C_SIG_LESS_EQUAL:
+ case SLJIT_SIG_LESS_EQUAL:
return 0xd0000000;
- case SLJIT_C_OVERFLOW:
- case SLJIT_C_FLOAT_UNORDERED:
+ case SLJIT_OVERFLOW:
+ case SLJIT_D_UNORDERED:
return 0x60000000;
- case SLJIT_C_NOT_OVERFLOW:
- case SLJIT_C_FLOAT_ORDERED:
+ case SLJIT_NOT_OVERFLOW:
+ case SLJIT_D_ORDERED:
return 0x70000000;
- default: /* SLJIT_JUMP */
+ default:
+ SLJIT_ASSERT(type >= SLJIT_JUMP && type <= SLJIT_CALL3);
return 0xe0000000;
}
}
@@ -2383,7 +2371,7 @@
struct sljit_label *label;
CHECK_ERROR_PTR();
- check_sljit_emit_label(compiler);
+ CHECK_PTR(check_sljit_emit_label(compiler));
if (compiler->last_label && compiler->last_label->size == compiler->size)
return compiler->last_label;
@@ -2399,7 +2387,7 @@
struct sljit_jump *jump;
CHECK_ERROR_PTR();
- check_sljit_emit_jump(compiler, type);
+ CHECK_PTR(check_sljit_emit_jump(compiler, type));
jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
PTR_FAIL_IF(!jump);
@@ -2440,7 +2428,7 @@
struct sljit_jump *jump;
CHECK_ERROR();
- check_sljit_emit_ijump(compiler, type, src, srcw);
+ CHECK(check_sljit_emit_ijump(compiler, type, src, srcw));
ADJUST_LOCAL_OFFSET(src, srcw);
/* In ARM, we don't need to touch the arguments. */
@@ -2481,7 +2469,7 @@
sljit_uw cc, ins;
CHECK_ERROR();
- check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+ CHECK(check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src, srcw);
@@ -2489,7 +2477,7 @@
return SLJIT_SUCCESS;
op = GET_OPCODE(op);
- cc = get_cc(type);
+ cc = get_cc(type & 0xff);
dst_r = FAST_IS_REG(dst) ? dst : TMP_REG2;
if (op < SLJIT_ADD) {
@@ -2531,7 +2519,7 @@
sljit_si reg;
CHECK_ERROR_PTR();
- check_sljit_emit_const(compiler, dst, dstw, init_value);
+ CHECK_PTR(check_sljit_emit_const(compiler, dst, dstw, init_value));
ADJUST_LOCAL_OFFSET(dst, dstw);
const_ = (struct sljit_const*)ensure_abuf(compiler, sizeof(struct sljit_const));
diff --git a/dist/sljit/sljitNativeARM_64.c b/dist/sljit/sljitNativeARM_64.c
index fba664e..b66455f 100644
--- a/dist/sljit/sljitNativeARM_64.c
+++ b/dist/sljit/sljitNativeARM_64.c
@@ -32,20 +32,19 @@
/* Length of an instruction word */
typedef sljit_ui sljit_ins;
-#define TMP_ZERO 0
+#define TMP_ZERO (0)
#define TMP_REG1 (SLJIT_NUMBER_OF_REGISTERS + 2)
#define TMP_REG2 (SLJIT_NUMBER_OF_REGISTERS + 3)
#define TMP_REG3 (SLJIT_NUMBER_OF_REGISTERS + 4)
-#define TMP_REG4 (SLJIT_NUMBER_OF_REGISTERS + 5)
-#define TMP_LR (SLJIT_NUMBER_OF_REGISTERS + 6)
-#define TMP_SP (SLJIT_NUMBER_OF_REGISTERS + 7)
+#define TMP_LR (SLJIT_NUMBER_OF_REGISTERS + 5)
+#define TMP_SP (SLJIT_NUMBER_OF_REGISTERS + 6)
#define TMP_FREG1 (0)
#define TMP_FREG2 (SLJIT_NUMBER_OF_FLOAT_REGISTERS + 1)
static SLJIT_CONST sljit_ub reg_map[SLJIT_NUMBER_OF_REGISTERS + 8] = {
- 31, 0, 1, 2, 3, 4, 5, 6, 7, 13, 14, 15, 16, 17, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 29, 9, 10, 11, 12, 30, 31
+ 31, 0, 1, 2, 3, 4, 5, 6, 7, 12, 13, 14, 15, 16, 17, 8, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 29, 9, 10, 11, 30, 31
};
#define W_OP (1 << 31)
@@ -220,7 +219,7 @@
struct sljit_const *const_;
CHECK_ERROR_PTR();
- check_sljit_generate_code(compiler);
+ CHECK_PTR(check_sljit_generate_code(compiler));
reverse_buf(compiler);
code = (sljit_ins*)SLJIT_MALLOC_EXEC(compiler->size * sizeof(sljit_ins));
@@ -730,12 +729,12 @@
return push_inst(compiler, (MADD ^ inv_bits) | RD(dst) | RN(arg1) | RM(arg2) | RT2(TMP_ZERO));
if (flags & INT_OP) {
FAIL_IF(push_inst(compiler, SMADDL | RD(dst) | RN(arg1) | RM(arg2) | (31 << 10)));
- FAIL_IF(push_inst(compiler, ADD | RD(TMP_REG4) | RN(TMP_ZERO) | RM(dst) | (2 << 22) | (31 << 10)));
- return push_inst(compiler, SUBS | RD(TMP_ZERO) | RN(TMP_REG4) | RM(dst) | (2 << 22) | (63 << 10));
+ FAIL_IF(push_inst(compiler, ADD | RD(TMP_LR) | RN(TMP_ZERO) | RM(dst) | (2 << 22) | (31 << 10)));
+ return push_inst(compiler, SUBS | RD(TMP_ZERO) | RN(TMP_LR) | RM(dst) | (2 << 22) | (63 << 10));
}
- FAIL_IF(push_inst(compiler, SMULH | RD(TMP_REG4) | RN(arg1) | RM(arg2)));
+ FAIL_IF(push_inst(compiler, SMULH | RD(TMP_LR) | RN(arg1) | RM(arg2)));
FAIL_IF(push_inst(compiler, MADD | RD(dst) | RN(arg1) | RM(arg2) | RT2(TMP_ZERO)));
- return push_inst(compiler, SUBS | RD(TMP_ZERO) | RN(TMP_REG4) | RM(dst) | (2 << 22) | (63 << 10));
+ return push_inst(compiler, SUBS | RD(TMP_ZERO) | RN(TMP_LR) | RM(dst) | (2 << 22) | (63 << 10));
case SLJIT_AND:
CHECK_FLAGS(3 << 29);
return push_inst(compiler, (AND ^ inv_bits) | RD(dst) | RN(arg1) | RM(arg2));
@@ -976,9 +975,9 @@
FAIL_IF(push_inst(compiler, ADD | RD(arg) | RN(arg) | RM(other_r) | (argw << 10)));
return push_inst(compiler, sljit_mem_imm[flags & 0x3] | (shift << 30) | RT(reg) | RN(arg));
}
- FAIL_IF(push_inst(compiler, ADD | RD(TMP_REG4) | RN(arg) | RM(other_r) | (argw << 10)));
- FAIL_IF(push_inst(compiler, sljit_mem_imm[flags & 0x3] | (shift << 30) | RT(reg) | RN(TMP_REG4)));
- return push_inst(compiler, ORR | RD(arg) | RN(TMP_ZERO) | RM(TMP_REG4));
+ FAIL_IF(push_inst(compiler, ADD | RD(TMP_LR) | RN(arg) | RM(other_r) | (argw << 10)));
+ FAIL_IF(push_inst(compiler, sljit_mem_imm[flags & 0x3] | (shift << 30) | RT(reg) | RN(TMP_LR)));
+ return push_inst(compiler, ORR | RD(arg) | RN(TMP_ZERO) | RM(TMP_LR));
}
if (arg & OFFS_REG_MASK) {
@@ -1065,41 +1064,33 @@
sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
{
- sljit_si i, tmp, offs, prev;
+ sljit_si i, tmp, offs, prev, saved_regs_size;
CHECK_ERROR();
- check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+ CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
- compiler->locals_offset = GET_SAVED_REGISTERS_SIZE(scratches, saveds, 2);
- local_size = (compiler->locals_offset + local_size + 15) & ~15;
+ saved_regs_size = GET_SAVED_REGISTERS_SIZE(scratches, saveds, 0);
+ local_size += saved_regs_size + SLJIT_LOCALS_OFFSET;
+ local_size = (local_size + 15) & ~0xf;
compiler->local_size = local_size;
- if (local_size <= (64 << 3))
+ if (local_size <= (63 * sizeof(sljit_sw))) {
FAIL_IF(push_inst(compiler, STP_PRE | 29 | RT2(TMP_LR)
| RN(TMP_SP) | ((-(local_size >> 3) & 0x7f) << 15)));
- else {
- local_size -= (64 << 3);
- if (local_size > 0xfff) {
- FAIL_IF(push_inst(compiler, SUBI | RD(TMP_SP) | RN(TMP_SP) | ((local_size >> 12) << 10) | (1 << 22)));
- local_size &= 0xfff;
+ FAIL_IF(push_inst(compiler, ADDI | RD(SLJIT_SP) | RN(TMP_SP) | (0 << 10)));
+ offs = (local_size - saved_regs_size) << (15 - 3);
+ } else {
+ offs = 0 << 15;
+ if (saved_regs_size & 0x8) {
+ offs = 1 << 15;
+ saved_regs_size += sizeof(sljit_sw);
}
- if (local_size)
- FAIL_IF(push_inst(compiler, SUBI | RD(TMP_SP) | RN(TMP_SP) | (local_size << 10)));
- FAIL_IF(push_inst(compiler, STP_PRE | 29 | RT2(TMP_LR) | RN(TMP_SP) | (0x40 << 15)));
+ local_size -= saved_regs_size + SLJIT_LOCALS_OFFSET;
+ FAIL_IF(push_inst(compiler, SUBI | RD(TMP_SP) | RN(TMP_SP) | (saved_regs_size << 10)));
}
- FAIL_IF(push_inst(compiler, ADDI | RD(SLJIT_SP) | RN(TMP_SP)));
-
tmp = saveds < SLJIT_NUMBER_OF_SAVED_REGISTERS ? (SLJIT_S0 + 1 - saveds) : SLJIT_FIRST_SAVED_REG;
- offs = 2 << 15;
prev = -1;
for (i = SLJIT_S0; i >= tmp; i--) {
if (prev == -1) {
@@ -1124,6 +1115,19 @@
if (prev != -1)
FAIL_IF(push_inst(compiler, STRI | RT(prev) | RN(TMP_SP) | (offs >> 5)));
+ if (compiler->local_size > (63 * sizeof(sljit_sw))) {
+ /* The local_size is already adjusted by the saved registers. */
+ if (local_size > 0xfff) {
+ FAIL_IF(push_inst(compiler, SUBI | RD(TMP_SP) | RN(TMP_SP) | ((local_size >> 12) << 10) | (1 << 22)));
+ local_size &= 0xfff;
+ }
+ if (local_size)
+ FAIL_IF(push_inst(compiler, SUBI | RD(TMP_SP) | RN(TMP_SP) | (local_size << 10)));
+ FAIL_IF(push_inst(compiler, STP_PRE | 29 | RT2(TMP_LR)
+ | RN(TMP_SP) | ((-(16 >> 3) & 0x7f) << 15)));
+ FAIL_IF(push_inst(compiler, ADDI | RD(SLJIT_SP) | RN(TMP_SP) | (0 << 10)));
+ }
+
if (args >= 1)
FAIL_IF(push_inst(compiler, ORR | RD(SLJIT_S0) | RN(TMP_ZERO) | RM(SLJIT_R0)));
if (args >= 2)
@@ -1134,37 +1138,53 @@
return SLJIT_SUCCESS;
}
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
{
- CHECK_ERROR_VOID();
- check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+ CHECK_ERROR();
+ CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
- compiler->locals_offset = GET_SAVED_REGISTERS_SIZE(scratches, saveds, 2);
- compiler->local_size = (compiler->locals_offset + local_size + 15) & ~15;
+ local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 0) + SLJIT_LOCALS_OFFSET;
+ local_size = (local_size + 15) & ~0xf;
+ compiler->local_size = local_size;
+ return SLJIT_SUCCESS;
}
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
{
sljit_si local_size;
- sljit_si i, tmp, offs, prev;
+ sljit_si i, tmp, offs, prev, saved_regs_size;
CHECK_ERROR();
- check_sljit_emit_return(compiler, op, src, srcw);
+ CHECK(check_sljit_emit_return(compiler, op, src, srcw));
FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
+ local_size = compiler->local_size;
+
+ saved_regs_size = GET_SAVED_REGISTERS_SIZE(compiler->scratches, compiler->saveds, 0);
+ if (local_size <= (63 * sizeof(sljit_sw)))
+ offs = (local_size - saved_regs_size) << (15 - 3);
+ else {
+ FAIL_IF(push_inst(compiler, LDP_PST | 29 | RT2(TMP_LR)
+ | RN(TMP_SP) | (((16 >> 3) & 0x7f) << 15)));
+ offs = 0 << 15;
+ if (saved_regs_size & 0x8) {
+ offs = 1 << 15;
+ saved_regs_size += sizeof(sljit_sw);
+ }
+ local_size -= saved_regs_size + SLJIT_LOCALS_OFFSET;
+ if (local_size > 0xfff) {
+ FAIL_IF(push_inst(compiler, ADDI | RD(TMP_SP) | RN(TMP_SP) | ((local_size >> 12) << 10) | (1 << 22)));
+ local_size &= 0xfff;
+ }
+ if (local_size)
+ FAIL_IF(push_inst(compiler, ADDI | RD(TMP_SP) | RN(TMP_SP) | (local_size << 10)));
+ }
+
tmp = compiler->saveds < SLJIT_NUMBER_OF_SAVED_REGISTERS ? (SLJIT_S0 + 1 - compiler->saveds) : SLJIT_FIRST_SAVED_REG;
- offs = 2 << 15;
prev = -1;
for (i = SLJIT_S0; i >= tmp; i--) {
if (prev == -1) {
@@ -1189,20 +1209,11 @@
if (prev != -1)
FAIL_IF(push_inst(compiler, LDRI | RT(prev) | RN(TMP_SP) | (offs >> 5)));
- local_size = compiler->local_size;
-
- if (local_size <= (62 << 3))
+ if (compiler->local_size <= (63 * sizeof(sljit_sw))) {
FAIL_IF(push_inst(compiler, LDP_PST | 29 | RT2(TMP_LR)
| RN(TMP_SP) | (((local_size >> 3) & 0x7f) << 15)));
- else {
- FAIL_IF(push_inst(compiler, LDP_PST | 29 | RT2(TMP_LR) | RN(TMP_SP) | (0x3e << 15)));
- local_size -= (62 << 3);
- if (local_size > 0xfff) {
- FAIL_IF(push_inst(compiler, ADDI | RD(TMP_SP) | RN(TMP_SP) | ((local_size >> 12) << 10) | (1 << 22)));
- local_size &= 0xfff;
- }
- if (local_size)
- FAIL_IF(push_inst(compiler, ADDI | RD(TMP_SP) | RN(TMP_SP) | (local_size << 10)));
+ } else {
+ FAIL_IF(push_inst(compiler, ADDI | RD(TMP_SP) | RN(TMP_SP) | (saved_regs_size << 10)));
}
FAIL_IF(push_inst(compiler, RET | RN(TMP_LR)));
@@ -1218,7 +1229,7 @@
sljit_ins inv_bits = (op & SLJIT_INT_OP) ? (1 << 31) : 0;
CHECK_ERROR();
- check_sljit_emit_op0(compiler, op);
+ CHECK(check_sljit_emit_op0(compiler, op));
op = GET_OPCODE(op);
switch (op) {
@@ -1226,15 +1237,15 @@
return push_inst(compiler, BRK);
case SLJIT_NOP:
return push_inst(compiler, NOP);
- case SLJIT_UMUL:
- case SLJIT_SMUL:
+ case SLJIT_LUMUL:
+ case SLJIT_LSMUL:
FAIL_IF(push_inst(compiler, ORR | RD(TMP_REG1) | RN(TMP_ZERO) | RM(SLJIT_R0)));
FAIL_IF(push_inst(compiler, MADD | RD(SLJIT_R0) | RN(SLJIT_R0) | RM(SLJIT_R1) | RT2(TMP_ZERO)));
- return push_inst(compiler, (op == SLJIT_SMUL ? SMULH : UMULH) | RD(SLJIT_R1) | RN(TMP_REG1) | RM(SLJIT_R1));
- case SLJIT_UDIV:
- case SLJIT_SDIV:
+ return push_inst(compiler, (op == SLJIT_LUMUL ? UMULH : SMULH) | RD(SLJIT_R1) | RN(TMP_REG1) | RM(SLJIT_R1));
+ case SLJIT_LUDIV:
+ case SLJIT_LSDIV:
FAIL_IF(push_inst(compiler, (ORR ^ inv_bits) | RD(TMP_REG1) | RN(TMP_ZERO) | RM(SLJIT_R0)));
- FAIL_IF(push_inst(compiler, ((op == SLJIT_SDIV ? SDIV : UDIV) ^ inv_bits) | RD(SLJIT_R0) | RN(SLJIT_R0) | RM(SLJIT_R1)));
+ FAIL_IF(push_inst(compiler, ((op == SLJIT_LUDIV ? UDIV : SDIV) ^ inv_bits) | RD(SLJIT_R0) | RN(SLJIT_R0) | RM(SLJIT_R1)));
FAIL_IF(push_inst(compiler, (MADD ^ inv_bits) | RD(SLJIT_R1) | RN(SLJIT_R0) | RM(SLJIT_R1) | RT2(TMP_ZERO)));
return push_inst(compiler, (SUB ^ inv_bits) | RD(SLJIT_R1) | RN(TMP_REG1) | RM(SLJIT_R1));
}
@@ -1250,7 +1261,7 @@
sljit_si op_flags = GET_ALL_FLAGS(op);
CHECK_ERROR();
- check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+ CHECK(check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src, srcw);
@@ -1402,7 +1413,7 @@
sljit_si dst_r, flags, mem_flags;
CHECK_ERROR();
- check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+ CHECK(check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src1, src1w);
ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1481,13 +1492,13 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg)
{
- check_sljit_get_register_index(reg);
+ CHECK_REG_INDEX(check_sljit_get_register_index(reg));
return reg_map[reg];
}
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg)
{
- check_sljit_get_float_register_index(reg);
+ CHECK_REG_INDEX(check_sljit_get_float_register_index(reg));
return reg;
}
@@ -1495,8 +1506,7 @@
void *instruction, sljit_si size)
{
CHECK_ERROR();
- check_sljit_emit_op_custom(compiler, instruction, size);
- SLJIT_ASSERT(size == 4);
+ CHECK(check_sljit_emit_op_custom(compiler, instruction, size));
return push_inst(compiler, *(sljit_ins*)instruction);
}
@@ -1662,7 +1672,7 @@
}
switch (GET_OPCODE(op)) {
- case SLJIT_MOVD:
+ case SLJIT_DMOV:
if (src != dst_r) {
if (dst_r != TMP_FREG1)
FAIL_IF(push_inst(compiler, (FMOV ^ inv_bits) | VD(dst_r) | VN(src)));
@@ -1670,10 +1680,10 @@
dst_r = src;
}
break;
- case SLJIT_NEGD:
+ case SLJIT_DNEG:
FAIL_IF(push_inst(compiler, (FNEG ^ inv_bits) | VD(dst_r) | VN(src)));
break;
- case SLJIT_ABSD:
+ case SLJIT_DABS:
FAIL_IF(push_inst(compiler, (FABS ^ inv_bits) | VD(dst_r) | VN(src)));
break;
case SLJIT_CONVD_FROMS:
@@ -1695,7 +1705,7 @@
sljit_ins inv_bits = (op & SLJIT_SINGLE_OP) ? (1 << 22) : 0;
CHECK_ERROR();
- check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+ CHECK(check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src1, src1w);
ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1714,16 +1724,16 @@
}
switch (GET_OPCODE(op)) {
- case SLJIT_ADDD:
+ case SLJIT_DADD:
FAIL_IF(push_inst(compiler, (FADD ^ inv_bits) | VD(dst_r) | VN(src1) | VM(src2)));
break;
- case SLJIT_SUBD:
+ case SLJIT_DSUB:
FAIL_IF(push_inst(compiler, (FSUB ^ inv_bits) | VD(dst_r) | VN(src1) | VM(src2)));
break;
- case SLJIT_MULD:
+ case SLJIT_DMUL:
FAIL_IF(push_inst(compiler, (FMUL ^ inv_bits) | VD(dst_r) | VN(src1) | VM(src2)));
break;
- case SLJIT_DIVD:
+ case SLJIT_DDIV:
FAIL_IF(push_inst(compiler, (FDIV ^ inv_bits) | VD(dst_r) | VN(src1) | VM(src2)));
break;
}
@@ -1740,7 +1750,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
{
CHECK_ERROR();
- check_sljit_emit_fast_enter(compiler, dst, dstw);
+ CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
ADJUST_LOCAL_OFFSET(dst, dstw);
/* For UNUSED dst. Uncommon, but possible. */
@@ -1757,7 +1767,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
{
CHECK_ERROR();
- check_sljit_emit_fast_return(compiler, src, srcw);
+ CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
ADJUST_LOCAL_OFFSET(src, srcw);
if (FAST_IS_REG(src))
@@ -1777,50 +1787,50 @@
static sljit_uw get_cc(sljit_si type)
{
switch (type) {
- case SLJIT_C_EQUAL:
- case SLJIT_C_MUL_NOT_OVERFLOW:
- case SLJIT_C_FLOAT_EQUAL:
+ case SLJIT_EQUAL:
+ case SLJIT_MUL_NOT_OVERFLOW:
+ case SLJIT_D_EQUAL:
return 0x1;
- case SLJIT_C_NOT_EQUAL:
- case SLJIT_C_MUL_OVERFLOW:
- case SLJIT_C_FLOAT_NOT_EQUAL:
+ case SLJIT_NOT_EQUAL:
+ case SLJIT_MUL_OVERFLOW:
+ case SLJIT_D_NOT_EQUAL:
return 0x0;
- case SLJIT_C_LESS:
- case SLJIT_C_FLOAT_LESS:
+ case SLJIT_LESS:
+ case SLJIT_D_LESS:
return 0x2;
- case SLJIT_C_GREATER_EQUAL:
- case SLJIT_C_FLOAT_GREATER_EQUAL:
+ case SLJIT_GREATER_EQUAL:
+ case SLJIT_D_GREATER_EQUAL:
return 0x3;
- case SLJIT_C_GREATER:
- case SLJIT_C_FLOAT_GREATER:
+ case SLJIT_GREATER:
+ case SLJIT_D_GREATER:
return 0x9;
- case SLJIT_C_LESS_EQUAL:
- case SLJIT_C_FLOAT_LESS_EQUAL:
+ case SLJIT_LESS_EQUAL:
+ case SLJIT_D_LESS_EQUAL:
return 0x8;
- case SLJIT_C_SIG_LESS:
+ case SLJIT_SIG_LESS:
return 0xa;
- case SLJIT_C_SIG_GREATER_EQUAL:
+ case SLJIT_SIG_GREATER_EQUAL:
return 0xb;
- case SLJIT_C_SIG_GREATER:
+ case SLJIT_SIG_GREATER:
return 0xd;
- case SLJIT_C_SIG_LESS_EQUAL:
+ case SLJIT_SIG_LESS_EQUAL:
return 0xc;
- case SLJIT_C_OVERFLOW:
- case SLJIT_C_FLOAT_UNORDERED:
+ case SLJIT_OVERFLOW:
+ case SLJIT_D_UNORDERED:
return 0x7;
- case SLJIT_C_NOT_OVERFLOW:
- case SLJIT_C_FLOAT_ORDERED:
+ case SLJIT_NOT_OVERFLOW:
+ case SLJIT_D_ORDERED:
return 0x6;
default:
@@ -1834,7 +1844,7 @@
struct sljit_label *label;
CHECK_ERROR_PTR();
- check_sljit_emit_label(compiler);
+ CHECK_PTR(check_sljit_emit_label(compiler));
if (compiler->last_label && compiler->last_label->size == compiler->size)
return compiler->last_label;
@@ -1850,7 +1860,7 @@
struct sljit_jump *jump;
CHECK_ERROR_PTR();
- check_sljit_emit_jump(compiler, type);
+ CHECK_PTR(check_sljit_emit_jump(compiler, type));
jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
PTR_FAIL_IF(!jump);
@@ -1877,7 +1887,7 @@
struct sljit_jump *jump;
sljit_ins inv_bits = (type & SLJIT_INT_OP) ? (1 << 31) : 0;
- SLJIT_ASSERT((type & 0xff) == SLJIT_C_EQUAL || (type & 0xff) == SLJIT_C_NOT_EQUAL);
+ SLJIT_ASSERT((type & 0xff) == SLJIT_EQUAL || (type & 0xff) == SLJIT_NOT_EQUAL);
ADJUST_LOCAL_OFFSET(src, srcw);
jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
@@ -1895,7 +1905,7 @@
}
SLJIT_ASSERT(FAST_IS_REG(src));
- if ((type & 0xff) == SLJIT_C_EQUAL)
+ if ((type & 0xff) == SLJIT_EQUAL)
inv_bits |= 1 << 24;
PTR_FAIL_IF(push_inst(compiler, (CBZ ^ inv_bits) | (6 << 5) | RT(src)));
@@ -1910,7 +1920,7 @@
struct sljit_jump *jump;
CHECK_ERROR();
- check_sljit_emit_ijump(compiler, type, src, srcw);
+ CHECK(check_sljit_emit_ijump(compiler, type, src, srcw));
ADJUST_LOCAL_OFFSET(src, srcw);
/* In ARM, we don't need to touch the arguments. */
@@ -1941,14 +1951,14 @@
sljit_ins cc;
CHECK_ERROR();
- check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+ CHECK(check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src, srcw);
if (dst == SLJIT_UNUSED)
return SLJIT_SUCCESS;
- cc = get_cc(type);
+ cc = get_cc(type & 0xff);
dst_r = FAST_IS_REG(dst) ? dst : TMP_REG1;
if (GET_OPCODE(op) < SLJIT_ADD) {
@@ -1988,7 +1998,7 @@
sljit_si dst_r;
CHECK_ERROR_PTR();
- check_sljit_emit_const(compiler, dst, dstw, init_value);
+ CHECK_PTR(check_sljit_emit_const(compiler, dst, dstw, init_value));
ADJUST_LOCAL_OFFSET(dst, dstw);
const_ = (struct sljit_const*)ensure_abuf(compiler, sizeof(struct sljit_const));
diff --git a/dist/sljit/sljitNativeARM_T2_32.c b/dist/sljit/sljitNativeARM_T2_32.c
index 7ea8cd7..6e38cec 100644
--- a/dist/sljit/sljitNativeARM_T2_32.c
+++ b/dist/sljit/sljitNativeARM_T2_32.c
@@ -353,7 +353,7 @@
struct sljit_const *const_;
CHECK_ERROR_PTR();
- check_sljit_generate_code(compiler);
+ CHECK_PTR(check_sljit_generate_code(compiler));
reverse_buf(compiler);
code = (sljit_uh*)SLJIT_MALLOC_EXEC(compiler->size * sizeof(sljit_uh));
@@ -1135,16 +1135,8 @@
sljit_ins push;
CHECK_ERROR();
- check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
+ CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
push = (1 << 4);
@@ -1180,26 +1172,19 @@
return SLJIT_SUCCESS;
}
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
{
sljit_si size;
- CHECK_ERROR_VOID();
- check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
+ CHECK_ERROR();
+ CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
size = GET_SAVED_REGISTERS_SIZE(scratches, saveds, 2);
compiler->local_size = ((size + local_size + 7) & ~7) - size;
+ return SLJIT_SUCCESS;
}
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
@@ -1208,7 +1193,7 @@
sljit_ins pop;
CHECK_ERROR();
- check_sljit_emit_return(compiler, op, src, srcw);
+ CHECK(check_sljit_emit_return(compiler, op, src, srcw));
FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
@@ -1255,7 +1240,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op)
{
CHECK_ERROR();
- check_sljit_emit_op0(compiler, op);
+ CHECK(check_sljit_emit_op0(compiler, op));
op = GET_OPCODE(op);
switch (op) {
@@ -1263,15 +1248,15 @@
return push_inst16(compiler, BKPT);
case SLJIT_NOP:
return push_inst16(compiler, NOP);
- case SLJIT_UMUL:
- case SLJIT_SMUL:
- return push_inst32(compiler, (op == SLJIT_UMUL ? UMULL : SMULL)
+ case SLJIT_LUMUL:
+ case SLJIT_LSMUL:
+ return push_inst32(compiler, (op == SLJIT_LUMUL ? UMULL : SMULL)
| (reg_map[SLJIT_R1] << 8)
| (reg_map[SLJIT_R0] << 12)
| (reg_map[SLJIT_R0] << 16)
| reg_map[SLJIT_R1]);
- case SLJIT_UDIV:
- case SLJIT_SDIV:
+ case SLJIT_LUDIV:
+ case SLJIT_LSDIV:
if (compiler->scratches >= 4) {
FAIL_IF(push_inst32(compiler, 0xf84d2d04 /* str r2, [sp, #-4]! */));
FAIL_IF(push_inst32(compiler, 0xf84dcd04 /* str ip, [sp, #-4]! */));
@@ -1279,7 +1264,7 @@
FAIL_IF(push_inst32(compiler, 0xf84d2d08 /* str r2, [sp, #-8]! */));
#if defined(__GNUC__)
FAIL_IF(sljit_emit_ijump(compiler, SLJIT_FAST_CALL, SLJIT_IMM,
- (op == SLJIT_UDIV ? SLJIT_FUNC_OFFSET(__aeabi_uidivmod) : SLJIT_FUNC_OFFSET(__aeabi_idivmod))));
+ (op == SLJIT_LUDIV ? SLJIT_FUNC_OFFSET(__aeabi_uidivmod) : SLJIT_FUNC_OFFSET(__aeabi_idivmod))));
#else
#error "Software divmod functions are needed"
#endif
@@ -1302,7 +1287,7 @@
sljit_si op_flags = GET_ALL_FLAGS(op);
CHECK_ERROR();
- check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+ CHECK(check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src, srcw);
@@ -1395,7 +1380,8 @@
}
if (op == SLJIT_NEG) {
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+ || (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
compiler->skip_checks = 1;
#endif
return sljit_emit_op2(compiler, SLJIT_SUB | op_flags, dst, dstw, SLJIT_IMM, 0, src, srcw);
@@ -1434,7 +1420,7 @@
sljit_si dst_r, flags;
CHECK_ERROR();
- check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+ CHECK(check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src1, src1w);
ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1507,13 +1493,13 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg)
{
- check_sljit_get_register_index(reg);
+ CHECK_REG_INDEX(check_sljit_get_register_index(reg));
return reg_map[reg];
}
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg)
{
- check_sljit_get_float_register_index(reg);
+ CHECK_REG_INDEX(check_sljit_get_float_register_index(reg));
return reg << 1;
}
@@ -1521,8 +1507,7 @@
void *instruction, sljit_si size)
{
CHECK_ERROR();
- check_sljit_emit_op_custom(compiler, instruction, size);
- SLJIT_ASSERT(size == 2 || size == 4);
+ CHECK(check_sljit_emit_op_custom(compiler, instruction, size));
if (size == 2)
return push_inst16(compiler, *(sljit_uh*)instruction);
@@ -1695,7 +1680,7 @@
}
switch (GET_OPCODE(op)) {
- case SLJIT_MOVD:
+ case SLJIT_DMOV:
if (src != dst_r) {
if (dst_r != TMP_FREG1)
FAIL_IF(push_inst32(compiler, VMOV_F32 | (op & SLJIT_SINGLE_OP) | DD4(dst_r) | DM4(src)));
@@ -1703,10 +1688,10 @@
dst_r = src;
}
break;
- case SLJIT_NEGD:
+ case SLJIT_DNEG:
FAIL_IF(push_inst32(compiler, VNEG_F32 | (op & SLJIT_SINGLE_OP) | DD4(dst_r) | DM4(src)));
break;
- case SLJIT_ABSD:
+ case SLJIT_DABS:
FAIL_IF(push_inst32(compiler, VABS_F32 | (op & SLJIT_SINGLE_OP) | DD4(dst_r) | DM4(src)));
break;
case SLJIT_CONVD_FROMS:
@@ -1728,7 +1713,7 @@
sljit_si dst_r;
CHECK_ERROR();
- check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+ CHECK(check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src1, src1w);
ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1748,16 +1733,16 @@
}
switch (GET_OPCODE(op)) {
- case SLJIT_ADDD:
+ case SLJIT_DADD:
FAIL_IF(push_inst32(compiler, VADD_F32 | (op & SLJIT_SINGLE_OP) | DD4(dst_r) | DN4(src1) | DM4(src2)));
break;
- case SLJIT_SUBD:
+ case SLJIT_DSUB:
FAIL_IF(push_inst32(compiler, VSUB_F32 | (op & SLJIT_SINGLE_OP) | DD4(dst_r) | DN4(src1) | DM4(src2)));
break;
- case SLJIT_MULD:
+ case SLJIT_DMUL:
FAIL_IF(push_inst32(compiler, VMUL_F32 | (op & SLJIT_SINGLE_OP) | DD4(dst_r) | DN4(src1) | DM4(src2)));
break;
- case SLJIT_DIVD:
+ case SLJIT_DDIV:
FAIL_IF(push_inst32(compiler, VDIV_F32 | (op & SLJIT_SINGLE_OP) | DD4(dst_r) | DN4(src1) | DM4(src2)));
break;
}
@@ -1776,7 +1761,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
{
CHECK_ERROR();
- check_sljit_emit_fast_enter(compiler, dst, dstw);
+ CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
ADJUST_LOCAL_OFFSET(dst, dstw);
/* For UNUSED dst. Uncommon, but possible. */
@@ -1799,7 +1784,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
{
CHECK_ERROR();
- check_sljit_emit_fast_return(compiler, src, srcw);
+ CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
ADJUST_LOCAL_OFFSET(src, srcw);
if (FAST_IS_REG(src))
@@ -1826,53 +1811,54 @@
static sljit_uw get_cc(sljit_si type)
{
switch (type) {
- case SLJIT_C_EQUAL:
- case SLJIT_C_MUL_NOT_OVERFLOW:
- case SLJIT_C_FLOAT_EQUAL:
+ case SLJIT_EQUAL:
+ case SLJIT_MUL_NOT_OVERFLOW:
+ case SLJIT_D_EQUAL:
return 0x0;
- case SLJIT_C_NOT_EQUAL:
- case SLJIT_C_MUL_OVERFLOW:
- case SLJIT_C_FLOAT_NOT_EQUAL:
+ case SLJIT_NOT_EQUAL:
+ case SLJIT_MUL_OVERFLOW:
+ case SLJIT_D_NOT_EQUAL:
return 0x1;
- case SLJIT_C_LESS:
- case SLJIT_C_FLOAT_LESS:
+ case SLJIT_LESS:
+ case SLJIT_D_LESS:
return 0x3;
- case SLJIT_C_GREATER_EQUAL:
- case SLJIT_C_FLOAT_GREATER_EQUAL:
+ case SLJIT_GREATER_EQUAL:
+ case SLJIT_D_GREATER_EQUAL:
return 0x2;
- case SLJIT_C_GREATER:
- case SLJIT_C_FLOAT_GREATER:
+ case SLJIT_GREATER:
+ case SLJIT_D_GREATER:
return 0x8;
- case SLJIT_C_LESS_EQUAL:
- case SLJIT_C_FLOAT_LESS_EQUAL:
+ case SLJIT_LESS_EQUAL:
+ case SLJIT_D_LESS_EQUAL:
return 0x9;
- case SLJIT_C_SIG_LESS:
+ case SLJIT_SIG_LESS:
return 0xb;
- case SLJIT_C_SIG_GREATER_EQUAL:
+ case SLJIT_SIG_GREATER_EQUAL:
return 0xa;
- case SLJIT_C_SIG_GREATER:
+ case SLJIT_SIG_GREATER:
return 0xc;
- case SLJIT_C_SIG_LESS_EQUAL:
+ case SLJIT_SIG_LESS_EQUAL:
return 0xd;
- case SLJIT_C_OVERFLOW:
- case SLJIT_C_FLOAT_UNORDERED:
+ case SLJIT_OVERFLOW:
+ case SLJIT_D_UNORDERED:
return 0x6;
- case SLJIT_C_NOT_OVERFLOW:
- case SLJIT_C_FLOAT_ORDERED:
+ case SLJIT_NOT_OVERFLOW:
+ case SLJIT_D_ORDERED:
return 0x7;
default: /* SLJIT_JUMP */
+ SLJIT_ASSERT_STOP();
return 0xe;
}
}
@@ -1882,7 +1868,7 @@
struct sljit_label *label;
CHECK_ERROR_PTR();
- check_sljit_emit_label(compiler);
+ CHECK_PTR(check_sljit_emit_label(compiler));
if (compiler->last_label && compiler->last_label->size == compiler->size)
return compiler->last_label;
@@ -1899,7 +1885,7 @@
sljit_ins cc;
CHECK_ERROR_PTR();
- check_sljit_emit_jump(compiler, type);
+ CHECK_PTR(check_sljit_emit_jump(compiler, type));
jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
PTR_FAIL_IF(!jump);
@@ -1931,7 +1917,7 @@
struct sljit_jump *jump;
CHECK_ERROR();
- check_sljit_emit_ijump(compiler, type, src, srcw);
+ CHECK(check_sljit_emit_ijump(compiler, type, src, srcw));
ADJUST_LOCAL_OFFSET(src, srcw);
/* In ARM, we don't need to touch the arguments. */
@@ -1963,7 +1949,7 @@
sljit_ins cc, ins;
CHECK_ERROR();
- check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+ CHECK(check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src, srcw);
@@ -1971,7 +1957,7 @@
return SLJIT_SUCCESS;
op = GET_OPCODE(op);
- cc = get_cc(type);
+ cc = get_cc(type & 0xff);
dst_r = FAST_IS_REG(dst) ? dst : TMP_REG2;
if (op < SLJIT_ADD) {
@@ -2042,7 +2028,7 @@
sljit_si dst_r;
CHECK_ERROR_PTR();
- check_sljit_emit_const(compiler, dst, dstw, init_value);
+ CHECK_PTR(check_sljit_emit_const(compiler, dst, dstw, init_value));
ADJUST_LOCAL_OFFSET(dst, dstw);
const_ = (struct sljit_const*)ensure_abuf(compiler, sizeof(struct sljit_const));
diff --git a/dist/sljit/sljitNativeMIPS_common.c b/dist/sljit/sljitNativeMIPS_common.c
index f1f9f70..3e2c9f0 100644
--- a/dist/sljit/sljitNativeMIPS_common.c
+++ b/dist/sljit/sljitNativeMIPS_common.c
@@ -371,7 +371,7 @@
struct sljit_const *const_;
CHECK_ERROR_PTR();
- check_sljit_generate_code(compiler);
+ CHECK_PTR(check_sljit_generate_code(compiler));
reverse_buf(compiler);
code = (sljit_ins*)SLJIT_MALLOC_EXEC(compiler->size * sizeof(sljit_ins));
@@ -546,18 +546,10 @@
sljit_si i, tmp, offs;
CHECK_ERROR();
- check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+ CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
-
- local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + FIXED_LOCALS_OFFSET;
+ local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + SLJIT_LOCALS_OFFSET;
#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
local_size = (local_size + 15) & ~0xf;
#else
@@ -602,28 +594,21 @@
return SLJIT_SUCCESS;
}
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
{
- CHECK_ERROR_VOID();
- check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+ CHECK_ERROR();
+ CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
-
- local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + FIXED_LOCALS_OFFSET;
+ local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + SLJIT_LOCALS_OFFSET;
#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
compiler->local_size = (local_size + 15) & ~0xf;
#else
compiler->local_size = (local_size + 31) & ~0x1f;
#endif
+ return SLJIT_SUCCESS;
}
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
@@ -632,7 +617,7 @@
sljit_ins base;
CHECK_ERROR();
- check_sljit_emit_return(compiler, op, src, srcw);
+ CHECK(check_sljit_emit_return(compiler, op, src, srcw));
FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
@@ -1051,7 +1036,7 @@
#endif
CHECK_ERROR();
- check_sljit_emit_op0(compiler, op);
+ CHECK(check_sljit_emit_op0(compiler, op));
op = GET_OPCODE(op);
switch (op) {
@@ -1059,17 +1044,17 @@
return push_inst(compiler, BREAK, UNMOVABLE_INS);
case SLJIT_NOP:
return push_inst(compiler, NOP, UNMOVABLE_INS);
- case SLJIT_UMUL:
- case SLJIT_SMUL:
+ case SLJIT_LUMUL:
+ case SLJIT_LSMUL:
#if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
- FAIL_IF(push_inst(compiler, (op == SLJIT_UMUL ? DMULTU : DMULT) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
+ FAIL_IF(push_inst(compiler, (op == SLJIT_LUMUL ? DMULTU : DMULT) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
#else
- FAIL_IF(push_inst(compiler, (op == SLJIT_UMUL ? MULTU : MULT) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
+ FAIL_IF(push_inst(compiler, (op == SLJIT_LUMUL ? MULTU : MULT) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
#endif
FAIL_IF(push_inst(compiler, MFLO | D(SLJIT_R0), DR(SLJIT_R0)));
return push_inst(compiler, MFHI | D(SLJIT_R1), DR(SLJIT_R1));
- case SLJIT_UDIV:
- case SLJIT_SDIV:
+ case SLJIT_LUDIV:
+ case SLJIT_LSDIV:
#if !(defined SLJIT_MIPS_R1 && SLJIT_MIPS_R1)
FAIL_IF(push_inst(compiler, NOP, UNMOVABLE_INS));
FAIL_IF(push_inst(compiler, NOP, UNMOVABLE_INS));
@@ -1077,11 +1062,11 @@
#if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
if (int_op)
- FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DIVU : DIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
+ FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DIVU : DIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
else
- FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DDIVU : DDIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
+ FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DDIVU : DDIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
#else
- FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DIVU : DIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
+ FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DIVU : DIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
#endif
FAIL_IF(push_inst(compiler, MFLO | D(SLJIT_R0), DR(SLJIT_R0)));
@@ -1102,7 +1087,7 @@
#endif
CHECK_ERROR();
- check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+ CHECK(check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src, srcw);
@@ -1204,7 +1189,7 @@
#endif
CHECK_ERROR();
- check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+ CHECK(check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src1, src1w);
ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1262,13 +1247,13 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg)
{
- check_sljit_get_register_index(reg);
+ CHECK_REG_INDEX(check_sljit_get_register_index(reg));
return reg_map[reg];
}
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg)
{
- check_sljit_get_float_register_index(reg);
+ CHECK_REG_INDEX(check_sljit_get_float_register_index(reg));
return reg << 1;
}
@@ -1276,8 +1261,7 @@
void *instruction, sljit_si size)
{
CHECK_ERROR();
- check_sljit_emit_op_custom(compiler, instruction, size);
- SLJIT_ASSERT(size == 4);
+ CHECK(check_sljit_emit_op_custom(compiler, instruction, size));
return push_inst(compiler, *(sljit_ins*)instruction, UNMOVABLE_INS);
}
@@ -1438,7 +1422,7 @@
src <<= 1;
switch (GET_OPCODE(op)) {
- case SLJIT_MOVD:
+ case SLJIT_DMOV:
if (src != dst_r) {
if (dst_r != TMP_FREG1)
FAIL_IF(push_inst(compiler, MOV_S | FMT(op) | FS(src) | FD(dst_r), MOVABLE_INS));
@@ -1446,10 +1430,10 @@
dst_r = src;
}
break;
- case SLJIT_NEGD:
+ case SLJIT_DNEG:
FAIL_IF(push_inst(compiler, NEG_S | FMT(op) | FS(src) | FD(dst_r), MOVABLE_INS));
break;
- case SLJIT_ABSD:
+ case SLJIT_DABS:
FAIL_IF(push_inst(compiler, ABS_S | FMT(op) | FS(src) | FD(dst_r), MOVABLE_INS));
break;
case SLJIT_CONVD_FROMS:
@@ -1471,7 +1455,7 @@
sljit_si dst_r, flags = 0;
CHECK_ERROR();
- check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+ CHECK(check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src1, src1w);
ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1522,19 +1506,19 @@
src2 = TMP_FREG2;
switch (GET_OPCODE(op)) {
- case SLJIT_ADDD:
+ case SLJIT_DADD:
FAIL_IF(push_inst(compiler, ADD_S | FMT(op) | FT(src2) | FS(src1) | FD(dst_r), MOVABLE_INS));
break;
- case SLJIT_SUBD:
+ case SLJIT_DSUB:
FAIL_IF(push_inst(compiler, SUB_S | FMT(op) | FT(src2) | FS(src1) | FD(dst_r), MOVABLE_INS));
break;
- case SLJIT_MULD:
+ case SLJIT_DMUL:
FAIL_IF(push_inst(compiler, MUL_S | FMT(op) | FT(src2) | FS(src1) | FD(dst_r), MOVABLE_INS));
break;
- case SLJIT_DIVD:
+ case SLJIT_DDIV:
FAIL_IF(push_inst(compiler, DIV_S | FMT(op) | FT(src2) | FS(src1) | FD(dst_r), MOVABLE_INS));
break;
}
@@ -1552,7 +1536,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
{
CHECK_ERROR();
- check_sljit_emit_fast_enter(compiler, dst, dstw);
+ CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
ADJUST_LOCAL_OFFSET(dst, dstw);
/* For UNUSED dst. Uncommon, but possible. */
@@ -1569,7 +1553,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
{
CHECK_ERROR();
- check_sljit_emit_fast_return(compiler, src, srcw);
+ CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
ADJUST_LOCAL_OFFSET(src, srcw);
if (FAST_IS_REG(src))
@@ -1592,7 +1576,7 @@
struct sljit_label *label;
CHECK_ERROR_PTR();
- check_sljit_emit_label(compiler);
+ CHECK_PTR(check_sljit_emit_label(compiler));
if (compiler->last_label && compiler->last_label->size == compiler->size)
return compiler->last_label;
@@ -1638,7 +1622,7 @@
sljit_si delay_check = UNMOVABLE_INS;
CHECK_ERROR_PTR();
- check_sljit_emit_jump(compiler, type);
+ CHECK_PTR(check_sljit_emit_jump(compiler, type));
jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
PTR_FAIL_IF(!jump);
@@ -1646,54 +1630,54 @@
type &= 0xff;
switch (type) {
- case SLJIT_C_EQUAL:
- case SLJIT_C_FLOAT_NOT_EQUAL:
+ case SLJIT_EQUAL:
+ case SLJIT_D_NOT_EQUAL:
BR_NZ(EQUAL_FLAG);
break;
- case SLJIT_C_NOT_EQUAL:
- case SLJIT_C_FLOAT_EQUAL:
+ case SLJIT_NOT_EQUAL:
+ case SLJIT_D_EQUAL:
BR_Z(EQUAL_FLAG);
break;
- case SLJIT_C_LESS:
- case SLJIT_C_FLOAT_LESS:
+ case SLJIT_LESS:
+ case SLJIT_D_LESS:
BR_Z(ULESS_FLAG);
break;
- case SLJIT_C_GREATER_EQUAL:
- case SLJIT_C_FLOAT_GREATER_EQUAL:
+ case SLJIT_GREATER_EQUAL:
+ case SLJIT_D_GREATER_EQUAL:
BR_NZ(ULESS_FLAG);
break;
- case SLJIT_C_GREATER:
- case SLJIT_C_FLOAT_GREATER:
+ case SLJIT_GREATER:
+ case SLJIT_D_GREATER:
BR_Z(UGREATER_FLAG);
break;
- case SLJIT_C_LESS_EQUAL:
- case SLJIT_C_FLOAT_LESS_EQUAL:
+ case SLJIT_LESS_EQUAL:
+ case SLJIT_D_LESS_EQUAL:
BR_NZ(UGREATER_FLAG);
break;
- case SLJIT_C_SIG_LESS:
+ case SLJIT_SIG_LESS:
BR_Z(LESS_FLAG);
break;
- case SLJIT_C_SIG_GREATER_EQUAL:
+ case SLJIT_SIG_GREATER_EQUAL:
BR_NZ(LESS_FLAG);
break;
- case SLJIT_C_SIG_GREATER:
+ case SLJIT_SIG_GREATER:
BR_Z(GREATER_FLAG);
break;
- case SLJIT_C_SIG_LESS_EQUAL:
+ case SLJIT_SIG_LESS_EQUAL:
BR_NZ(GREATER_FLAG);
break;
- case SLJIT_C_OVERFLOW:
- case SLJIT_C_MUL_OVERFLOW:
+ case SLJIT_OVERFLOW:
+ case SLJIT_MUL_OVERFLOW:
BR_Z(OVERFLOW_FLAG);
break;
- case SLJIT_C_NOT_OVERFLOW:
- case SLJIT_C_MUL_NOT_OVERFLOW:
+ case SLJIT_NOT_OVERFLOW:
+ case SLJIT_MUL_NOT_OVERFLOW:
BR_NZ(OVERFLOW_FLAG);
break;
- case SLJIT_C_FLOAT_UNORDERED:
+ case SLJIT_D_UNORDERED:
BR_F();
break;
- case SLJIT_C_FLOAT_ORDERED:
+ case SLJIT_D_ORDERED:
BR_T();
break;
default:
@@ -1755,7 +1739,7 @@
sljit_ins inst;
CHECK_ERROR_PTR();
- check_sljit_emit_cmp(compiler, type, src1, src1w, src2, src2w);
+ CHECK_PTR(check_sljit_emit_cmp(compiler, type, src1, src1w, src2, src2w));
ADJUST_LOCAL_OFFSET(src1, src1w);
ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1776,32 +1760,32 @@
set_jump(jump, compiler, type & SLJIT_REWRITABLE_JUMP);
type &= 0xff;
- if (type <= SLJIT_C_NOT_EQUAL) {
+ if (type <= SLJIT_NOT_EQUAL) {
RESOLVE_IMM1();
RESOLVE_IMM2();
jump->flags |= IS_BIT26_COND;
if (compiler->delay_slot == MOVABLE_INS || (compiler->delay_slot != UNMOVABLE_INS && compiler->delay_slot != DR(src1) && compiler->delay_slot != DR(src2)))
jump->flags |= IS_MOVABLE;
- PTR_FAIL_IF(push_inst(compiler, (type == SLJIT_C_EQUAL ? BNE : BEQ) | S(src1) | T(src2) | JUMP_LENGTH, UNMOVABLE_INS));
+ PTR_FAIL_IF(push_inst(compiler, (type == SLJIT_EQUAL ? BNE : BEQ) | S(src1) | T(src2) | JUMP_LENGTH, UNMOVABLE_INS));
}
- else if (type >= SLJIT_C_SIG_LESS && (((src1 & SLJIT_IMM) && (src1w == 0)) || ((src2 & SLJIT_IMM) && (src2w == 0)))) {
+ else if (type >= SLJIT_SIG_LESS && (((src1 & SLJIT_IMM) && (src1w == 0)) || ((src2 & SLJIT_IMM) && (src2w == 0)))) {
inst = NOP;
if ((src1 & SLJIT_IMM) && (src1w == 0)) {
RESOLVE_IMM2();
switch (type) {
- case SLJIT_C_SIG_LESS:
+ case SLJIT_SIG_LESS:
inst = BLEZ;
jump->flags |= IS_BIT26_COND;
break;
- case SLJIT_C_SIG_GREATER_EQUAL:
+ case SLJIT_SIG_GREATER_EQUAL:
inst = BGTZ;
jump->flags |= IS_BIT26_COND;
break;
- case SLJIT_C_SIG_GREATER:
+ case SLJIT_SIG_GREATER:
inst = BGEZ;
jump->flags |= IS_BIT16_COND;
break;
- case SLJIT_C_SIG_LESS_EQUAL:
+ case SLJIT_SIG_LESS_EQUAL:
inst = BLTZ;
jump->flags |= IS_BIT16_COND;
break;
@@ -1811,19 +1795,19 @@
else {
RESOLVE_IMM1();
switch (type) {
- case SLJIT_C_SIG_LESS:
+ case SLJIT_SIG_LESS:
inst = BGEZ;
jump->flags |= IS_BIT16_COND;
break;
- case SLJIT_C_SIG_GREATER_EQUAL:
+ case SLJIT_SIG_GREATER_EQUAL:
inst = BLTZ;
jump->flags |= IS_BIT16_COND;
break;
- case SLJIT_C_SIG_GREATER:
+ case SLJIT_SIG_GREATER:
inst = BLEZ;
jump->flags |= IS_BIT26_COND;
break;
- case SLJIT_C_SIG_LESS_EQUAL:
+ case SLJIT_SIG_LESS_EQUAL:
inst = BGTZ;
jump->flags |= IS_BIT26_COND;
break;
@@ -1832,29 +1816,29 @@
PTR_FAIL_IF(push_inst(compiler, inst | S(src1) | JUMP_LENGTH, UNMOVABLE_INS));
}
else {
- if (type == SLJIT_C_LESS || type == SLJIT_C_GREATER_EQUAL || type == SLJIT_C_SIG_LESS || type == SLJIT_C_SIG_GREATER_EQUAL) {
+ if (type == SLJIT_LESS || type == SLJIT_GREATER_EQUAL || type == SLJIT_SIG_LESS || type == SLJIT_SIG_GREATER_EQUAL) {
RESOLVE_IMM1();
if ((src2 & SLJIT_IMM) && src2w <= SIMM_MAX && src2w >= SIMM_MIN)
- PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_C_LESS_EQUAL ? SLTIU : SLTI) | S(src1) | T(TMP_REG1) | IMM(src2w), DR(TMP_REG1)));
+ PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_LESS_EQUAL ? SLTIU : SLTI) | S(src1) | T(TMP_REG1) | IMM(src2w), DR(TMP_REG1)));
else {
RESOLVE_IMM2();
- PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_C_LESS_EQUAL ? SLTU : SLT) | S(src1) | T(src2) | D(TMP_REG1), DR(TMP_REG1)));
+ PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_LESS_EQUAL ? SLTU : SLT) | S(src1) | T(src2) | D(TMP_REG1), DR(TMP_REG1)));
}
- type = (type == SLJIT_C_LESS || type == SLJIT_C_SIG_LESS) ? SLJIT_C_NOT_EQUAL : SLJIT_C_EQUAL;
+ type = (type == SLJIT_LESS || type == SLJIT_SIG_LESS) ? SLJIT_NOT_EQUAL : SLJIT_EQUAL;
}
else {
RESOLVE_IMM2();
if ((src1 & SLJIT_IMM) && src1w <= SIMM_MAX && src1w >= SIMM_MIN)
- PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_C_LESS_EQUAL ? SLTIU : SLTI) | S(src2) | T(TMP_REG1) | IMM(src1w), DR(TMP_REG1)));
+ PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_LESS_EQUAL ? SLTIU : SLTI) | S(src2) | T(TMP_REG1) | IMM(src1w), DR(TMP_REG1)));
else {
RESOLVE_IMM1();
- PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_C_LESS_EQUAL ? SLTU : SLT) | S(src2) | T(src1) | D(TMP_REG1), DR(TMP_REG1)));
+ PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_LESS_EQUAL ? SLTU : SLT) | S(src2) | T(src1) | D(TMP_REG1), DR(TMP_REG1)));
}
- type = (type == SLJIT_C_GREATER || type == SLJIT_C_SIG_GREATER) ? SLJIT_C_NOT_EQUAL : SLJIT_C_EQUAL;
+ type = (type == SLJIT_GREATER || type == SLJIT_SIG_GREATER) ? SLJIT_NOT_EQUAL : SLJIT_EQUAL;
}
jump->flags |= IS_BIT26_COND;
- PTR_FAIL_IF(push_inst(compiler, (type == SLJIT_C_EQUAL ? BNE : BEQ) | S(TMP_REG1) | TA(0) | JUMP_LENGTH, UNMOVABLE_INS));
+ PTR_FAIL_IF(push_inst(compiler, (type == SLJIT_EQUAL ? BNE : BEQ) | S(TMP_REG1) | TA(0) | JUMP_LENGTH, UNMOVABLE_INS));
}
PTR_FAIL_IF(emit_const(compiler, TMP_REG2, 0));
@@ -1876,7 +1860,7 @@
sljit_si if_true;
CHECK_ERROR_PTR();
- check_sljit_emit_fcmp(compiler, type, src1, src1w, src2, src2w);
+ CHECK_PTR(check_sljit_emit_fcmp(compiler, type, src1, src1w, src2, src2w));
compiler->cache_arg = 0;
compiler->cache_argw = 0;
@@ -1901,36 +1885,37 @@
jump->flags |= IS_BIT16_COND;
switch (type & 0xff) {
- case SLJIT_C_FLOAT_EQUAL:
+ case SLJIT_D_EQUAL:
inst = C_UEQ_S;
if_true = 1;
break;
- case SLJIT_C_FLOAT_NOT_EQUAL:
+ case SLJIT_D_NOT_EQUAL:
inst = C_UEQ_S;
if_true = 0;
break;
- case SLJIT_C_FLOAT_LESS:
+ case SLJIT_D_LESS:
inst = C_ULT_S;
if_true = 1;
break;
- case SLJIT_C_FLOAT_GREATER_EQUAL:
+ case SLJIT_D_GREATER_EQUAL:
inst = C_ULT_S;
if_true = 0;
break;
- case SLJIT_C_FLOAT_GREATER:
+ case SLJIT_D_GREATER:
inst = C_ULE_S;
if_true = 0;
break;
- case SLJIT_C_FLOAT_LESS_EQUAL:
+ case SLJIT_D_LESS_EQUAL:
inst = C_ULE_S;
if_true = 1;
break;
- case SLJIT_C_FLOAT_UNORDERED:
+ case SLJIT_D_UNORDERED:
inst = C_UN_S;
if_true = 1;
break;
- case SLJIT_C_FLOAT_ORDERED:
default: /* Make compilers happy. */
+ SLJIT_ASSERT_STOP();
+ case SLJIT_D_ORDERED:
inst = C_UN_S;
if_true = 0;
break;
@@ -1961,7 +1946,7 @@
struct sljit_jump *jump = NULL;
CHECK_ERROR();
- check_sljit_emit_ijump(compiler, type, src, srcw);
+ CHECK(check_sljit_emit_ijump(compiler, type, src, srcw));
ADJUST_LOCAL_OFFSET(src, srcw);
if (FAST_IS_REG(src)) {
@@ -2027,7 +2012,7 @@
#endif
CHECK_ERROR();
- check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+ CHECK(check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type));
ADJUST_LOCAL_OFFSET(dst, dstw);
if (dst == SLJIT_UNUSED)
@@ -2049,49 +2034,49 @@
srcw = 0;
}
- switch (type) {
- case SLJIT_C_EQUAL:
- case SLJIT_C_NOT_EQUAL:
+ switch (type & 0xff) {
+ case SLJIT_EQUAL:
+ case SLJIT_NOT_EQUAL:
FAIL_IF(push_inst(compiler, SLTIU | SA(EQUAL_FLAG) | TA(sugg_dst_ar) | IMM(1), sugg_dst_ar));
dst_ar = sugg_dst_ar;
break;
- case SLJIT_C_LESS:
- case SLJIT_C_GREATER_EQUAL:
- case SLJIT_C_FLOAT_LESS:
- case SLJIT_C_FLOAT_GREATER_EQUAL:
+ case SLJIT_LESS:
+ case SLJIT_GREATER_EQUAL:
+ case SLJIT_D_LESS:
+ case SLJIT_D_GREATER_EQUAL:
dst_ar = ULESS_FLAG;
break;
- case SLJIT_C_GREATER:
- case SLJIT_C_LESS_EQUAL:
- case SLJIT_C_FLOAT_GREATER:
- case SLJIT_C_FLOAT_LESS_EQUAL:
+ case SLJIT_GREATER:
+ case SLJIT_LESS_EQUAL:
+ case SLJIT_D_GREATER:
+ case SLJIT_D_LESS_EQUAL:
dst_ar = UGREATER_FLAG;
break;
- case SLJIT_C_SIG_LESS:
- case SLJIT_C_SIG_GREATER_EQUAL:
+ case SLJIT_SIG_LESS:
+ case SLJIT_SIG_GREATER_EQUAL:
dst_ar = LESS_FLAG;
break;
- case SLJIT_C_SIG_GREATER:
- case SLJIT_C_SIG_LESS_EQUAL:
+ case SLJIT_SIG_GREATER:
+ case SLJIT_SIG_LESS_EQUAL:
dst_ar = GREATER_FLAG;
break;
- case SLJIT_C_OVERFLOW:
- case SLJIT_C_NOT_OVERFLOW:
+ case SLJIT_OVERFLOW:
+ case SLJIT_NOT_OVERFLOW:
dst_ar = OVERFLOW_FLAG;
break;
- case SLJIT_C_MUL_OVERFLOW:
- case SLJIT_C_MUL_NOT_OVERFLOW:
+ case SLJIT_MUL_OVERFLOW:
+ case SLJIT_MUL_NOT_OVERFLOW:
FAIL_IF(push_inst(compiler, SLTIU | SA(OVERFLOW_FLAG) | TA(sugg_dst_ar) | IMM(1), sugg_dst_ar));
dst_ar = sugg_dst_ar;
type ^= 0x1; /* Flip type bit for the XORI below. */
break;
- case SLJIT_C_FLOAT_EQUAL:
- case SLJIT_C_FLOAT_NOT_EQUAL:
+ case SLJIT_D_EQUAL:
+ case SLJIT_D_NOT_EQUAL:
dst_ar = EQUAL_FLAG;
break;
- case SLJIT_C_FLOAT_UNORDERED:
- case SLJIT_C_FLOAT_ORDERED:
+ case SLJIT_D_UNORDERED:
+ case SLJIT_D_ORDERED:
FAIL_IF(push_inst(compiler, CFC1 | TA(sugg_dst_ar) | DA(FCSR_REG), sugg_dst_ar));
FAIL_IF(push_inst(compiler, SRL | TA(sugg_dst_ar) | DA(sugg_dst_ar) | SH_IMM(23), sugg_dst_ar));
FAIL_IF(push_inst(compiler, ANDI | SA(sugg_dst_ar) | TA(sugg_dst_ar) | IMM(1), sugg_dst_ar));
@@ -2133,7 +2118,7 @@
sljit_si reg;
CHECK_ERROR_PTR();
- check_sljit_emit_const(compiler, dst, dstw, init_value);
+ CHECK_PTR(check_sljit_emit_const(compiler, dst, dstw, init_value));
ADJUST_LOCAL_OFFSET(dst, dstw);
const_ = (struct sljit_const*)ensure_abuf(compiler, sizeof(struct sljit_const));
diff --git a/dist/sljit/sljitNativePPC_common.c b/dist/sljit/sljitNativePPC_common.c
index 01cb771..08d5356 100644
--- a/dist/sljit/sljitNativePPC_common.c
+++ b/dist/sljit/sljitNativePPC_common.c
@@ -329,7 +329,7 @@
struct sljit_const *const_;
CHECK_ERROR_PTR();
- check_sljit_generate_code(compiler);
+ CHECK_PTR(check_sljit_generate_code(compiler));
reverse_buf(compiler);
#if (defined SLJIT_INDIRECT_CALL && SLJIT_INDIRECT_CALL)
@@ -578,16 +578,8 @@
sljit_si i, tmp, offs;
CHECK_ERROR();
- check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
+ CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
FAIL_IF(push_inst(compiler, MFLR | D(0)));
offs = -(sljit_si)(sizeof(sljit_sw));
@@ -620,7 +612,7 @@
if (args >= 3)
FAIL_IF(push_inst(compiler, OR | S(SLJIT_R2) | A(SLJIT_S2) | B(SLJIT_R2)));
- local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + FIXED_LOCALS_OFFSET;
+ local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + SLJIT_LOCALS_OFFSET;
local_size = (local_size + 15) & ~0xf;
compiler->local_size = local_size;
@@ -643,24 +635,17 @@
return SLJIT_SUCCESS;
}
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
{
- CHECK_ERROR_VOID();
- check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+ CHECK_ERROR();
+ CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
-
- local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + FIXED_LOCALS_OFFSET;
+ local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + SLJIT_LOCALS_OFFSET;
compiler->local_size = (local_size + 15) & ~0xf;
+ return SLJIT_SUCCESS;
}
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
@@ -668,7 +653,7 @@
sljit_si i, tmp, offs;
CHECK_ERROR();
- check_sljit_emit_return(compiler, op, src, srcw);
+ CHECK(check_sljit_emit_return(compiler, op, src, srcw));
FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
@@ -1265,37 +1250,37 @@
#endif
CHECK_ERROR();
- check_sljit_emit_op0(compiler, op);
+ CHECK(check_sljit_emit_op0(compiler, op));
op = GET_OPCODE(op);
switch (op) {
case SLJIT_BREAKPOINT:
case SLJIT_NOP:
return push_inst(compiler, NOP);
- case SLJIT_UMUL:
- case SLJIT_SMUL:
+ case SLJIT_LUMUL:
+ case SLJIT_LSMUL:
FAIL_IF(push_inst(compiler, OR | S(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R0)));
#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
FAIL_IF(push_inst(compiler, MULLD | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
- return push_inst(compiler, (op == SLJIT_UMUL ? MULHDU : MULHD) | D(SLJIT_R1) | A(TMP_REG1) | B(SLJIT_R1));
+ return push_inst(compiler, (op == SLJIT_LUMUL ? MULHDU : MULHD) | D(SLJIT_R1) | A(TMP_REG1) | B(SLJIT_R1));
#else
FAIL_IF(push_inst(compiler, MULLW | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
- return push_inst(compiler, (op == SLJIT_UMUL ? MULHWU : MULHW) | D(SLJIT_R1) | A(TMP_REG1) | B(SLJIT_R1));
+ return push_inst(compiler, (op == SLJIT_LUMUL ? MULHWU : MULHW) | D(SLJIT_R1) | A(TMP_REG1) | B(SLJIT_R1));
#endif
- case SLJIT_UDIV:
- case SLJIT_SDIV:
+ case SLJIT_LUDIV:
+ case SLJIT_LSDIV:
FAIL_IF(push_inst(compiler, OR | S(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R0)));
#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
if (int_op) {
- FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DIVWU : DIVW) | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
+ FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DIVWU : DIVW) | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
FAIL_IF(push_inst(compiler, MULLW | D(SLJIT_R1) | A(SLJIT_R0) | B(SLJIT_R1)));
} else {
- FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DIVDU : DIVD) | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
+ FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DIVDU : DIVD) | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
FAIL_IF(push_inst(compiler, MULLD | D(SLJIT_R1) | A(SLJIT_R0) | B(SLJIT_R1)));
}
return push_inst(compiler, SUBF | D(SLJIT_R1) | A(SLJIT_R1) | B(TMP_REG1));
#else
- FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DIVWU : DIVW) | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
+ FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DIVWU : DIVW) | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
FAIL_IF(push_inst(compiler, MULLW | D(SLJIT_R1) | A(SLJIT_R0) | B(SLJIT_R1)));
return push_inst(compiler, SUBF | D(SLJIT_R1) | A(SLJIT_R1) | B(TMP_REG1));
#endif
@@ -1315,7 +1300,7 @@
sljit_si op_flags = GET_ALL_FLAGS(op);
CHECK_ERROR();
- check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+ CHECK(check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src, srcw);
@@ -1470,7 +1455,7 @@
sljit_si flags = GET_FLAGS(op) ? ALT_SET_FLAGS : 0;
CHECK_ERROR();
- check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+ CHECK(check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src1, src1w);
ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1672,13 +1657,13 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg)
{
- check_sljit_get_register_index(reg);
+ CHECK_REG_INDEX(check_sljit_get_register_index(reg));
return reg_map[reg];
}
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg)
{
- check_sljit_get_float_register_index(reg);
+ CHECK_REG_INDEX(check_sljit_get_float_register_index(reg));
return reg;
}
@@ -1686,8 +1671,7 @@
void *instruction, sljit_si size)
{
CHECK_ERROR();
- check_sljit_emit_op_custom(compiler, instruction, size);
- SLJIT_ASSERT(size == 4);
+ CHECK(check_sljit_emit_op_custom(compiler, instruction, size));
return push_inst(compiler, *(sljit_ins*)instruction);
}
@@ -1918,7 +1902,7 @@
break;
}
/* Fall through. */
- case SLJIT_MOVD:
+ case SLJIT_DMOV:
if (src != dst_r) {
if (dst_r != TMP_FREG1)
FAIL_IF(push_inst(compiler, FMR | FD(dst_r) | FB(src)));
@@ -1926,10 +1910,10 @@
dst_r = src;
}
break;
- case SLJIT_NEGD:
+ case SLJIT_DNEG:
FAIL_IF(push_inst(compiler, FNEG | FD(dst_r) | FB(src)));
break;
- case SLJIT_ABSD:
+ case SLJIT_DABS:
FAIL_IF(push_inst(compiler, FABS | FD(dst_r) | FB(src)));
break;
}
@@ -1947,7 +1931,7 @@
sljit_si dst_r, flags = 0;
CHECK_ERROR();
- check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+ CHECK(check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src1, src1w);
ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1994,19 +1978,19 @@
src2 = TMP_FREG2;
switch (GET_OPCODE(op)) {
- case SLJIT_ADDD:
+ case SLJIT_DADD:
FAIL_IF(push_inst(compiler, SELECT_FOP(op, FADDS, FADD) | FD(dst_r) | FA(src1) | FB(src2)));
break;
- case SLJIT_SUBD:
+ case SLJIT_DSUB:
FAIL_IF(push_inst(compiler, SELECT_FOP(op, FSUBS, FSUB) | FD(dst_r) | FA(src1) | FB(src2)));
break;
- case SLJIT_MULD:
+ case SLJIT_DMUL:
FAIL_IF(push_inst(compiler, SELECT_FOP(op, FMULS, FMUL) | FD(dst_r) | FA(src1) | FC(src2) /* FMUL use FC as src2 */));
break;
- case SLJIT_DIVD:
+ case SLJIT_DDIV:
FAIL_IF(push_inst(compiler, SELECT_FOP(op, FDIVS, FDIV) | FD(dst_r) | FA(src1) | FB(src2)));
break;
}
@@ -2027,7 +2011,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
{
CHECK_ERROR();
- check_sljit_emit_fast_enter(compiler, dst, dstw);
+ CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
ADJUST_LOCAL_OFFSET(dst, dstw);
/* For UNUSED dst. Uncommon, but possible. */
@@ -2045,7 +2029,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
{
CHECK_ERROR();
- check_sljit_emit_fast_return(compiler, src, srcw);
+ CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
ADJUST_LOCAL_OFFSET(src, srcw);
if (FAST_IS_REG(src))
@@ -2069,7 +2053,7 @@
struct sljit_label *label;
CHECK_ERROR_PTR();
- check_sljit_emit_label(compiler);
+ CHECK_PTR(check_sljit_emit_label(compiler));
if (compiler->last_label && compiler->last_label->size == compiler->size)
return compiler->last_label;
@@ -2083,58 +2067,58 @@
static sljit_ins get_bo_bi_flags(sljit_si type)
{
switch (type) {
- case SLJIT_C_EQUAL:
+ case SLJIT_EQUAL:
return (12 << 21) | (2 << 16);
- case SLJIT_C_NOT_EQUAL:
+ case SLJIT_NOT_EQUAL:
return (4 << 21) | (2 << 16);
- case SLJIT_C_LESS:
- case SLJIT_C_FLOAT_LESS:
+ case SLJIT_LESS:
+ case SLJIT_D_LESS:
return (12 << 21) | ((4 + 0) << 16);
- case SLJIT_C_GREATER_EQUAL:
- case SLJIT_C_FLOAT_GREATER_EQUAL:
+ case SLJIT_GREATER_EQUAL:
+ case SLJIT_D_GREATER_EQUAL:
return (4 << 21) | ((4 + 0) << 16);
- case SLJIT_C_GREATER:
- case SLJIT_C_FLOAT_GREATER:
+ case SLJIT_GREATER:
+ case SLJIT_D_GREATER:
return (12 << 21) | ((4 + 1) << 16);
- case SLJIT_C_LESS_EQUAL:
- case SLJIT_C_FLOAT_LESS_EQUAL:
+ case SLJIT_LESS_EQUAL:
+ case SLJIT_D_LESS_EQUAL:
return (4 << 21) | ((4 + 1) << 16);
- case SLJIT_C_SIG_LESS:
+ case SLJIT_SIG_LESS:
return (12 << 21) | (0 << 16);
- case SLJIT_C_SIG_GREATER_EQUAL:
+ case SLJIT_SIG_GREATER_EQUAL:
return (4 << 21) | (0 << 16);
- case SLJIT_C_SIG_GREATER:
+ case SLJIT_SIG_GREATER:
return (12 << 21) | (1 << 16);
- case SLJIT_C_SIG_LESS_EQUAL:
+ case SLJIT_SIG_LESS_EQUAL:
return (4 << 21) | (1 << 16);
- case SLJIT_C_OVERFLOW:
- case SLJIT_C_MUL_OVERFLOW:
+ case SLJIT_OVERFLOW:
+ case SLJIT_MUL_OVERFLOW:
return (12 << 21) | (3 << 16);
- case SLJIT_C_NOT_OVERFLOW:
- case SLJIT_C_MUL_NOT_OVERFLOW:
+ case SLJIT_NOT_OVERFLOW:
+ case SLJIT_MUL_NOT_OVERFLOW:
return (4 << 21) | (3 << 16);
- case SLJIT_C_FLOAT_EQUAL:
+ case SLJIT_D_EQUAL:
return (12 << 21) | ((4 + 2) << 16);
- case SLJIT_C_FLOAT_NOT_EQUAL:
+ case SLJIT_D_NOT_EQUAL:
return (4 << 21) | ((4 + 2) << 16);
- case SLJIT_C_FLOAT_UNORDERED:
+ case SLJIT_D_UNORDERED:
return (12 << 21) | ((4 + 3) << 16);
- case SLJIT_C_FLOAT_ORDERED:
+ case SLJIT_D_ORDERED:
return (4 << 21) | ((4 + 3) << 16);
default:
@@ -2149,7 +2133,7 @@
sljit_ins bo_bi_flags;
CHECK_ERROR_PTR();
- check_sljit_emit_jump(compiler, type);
+ CHECK_PTR(check_sljit_emit_jump(compiler, type));
bo_bi_flags = get_bo_bi_flags(type & 0xff);
if (!bo_bi_flags)
@@ -2181,7 +2165,7 @@
sljit_si src_r;
CHECK_ERROR();
- check_sljit_emit_ijump(compiler, type, src, srcw);
+ CHECK(check_sljit_emit_ijump(compiler, type, src, srcw));
ADJUST_LOCAL_OFFSET(src, srcw);
if (FAST_IS_REG(src)) {
@@ -2236,7 +2220,7 @@
sljit_sw original_dstw = dstw;
CHECK_ERROR();
- check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+ CHECK(check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type));
ADJUST_LOCAL_OFFSET(dst, dstw);
if (dst == SLJIT_UNUSED)
@@ -2259,81 +2243,81 @@
srcw = 0;
}
- switch (type) {
- case SLJIT_C_EQUAL:
+ switch (type & 0xff) {
+ case SLJIT_EQUAL:
GET_CR_BIT(2, reg);
break;
- case SLJIT_C_NOT_EQUAL:
+ case SLJIT_NOT_EQUAL:
GET_CR_BIT(2, reg);
INVERT_BIT(reg);
break;
- case SLJIT_C_LESS:
- case SLJIT_C_FLOAT_LESS:
+ case SLJIT_LESS:
+ case SLJIT_D_LESS:
GET_CR_BIT(4 + 0, reg);
break;
- case SLJIT_C_GREATER_EQUAL:
- case SLJIT_C_FLOAT_GREATER_EQUAL:
+ case SLJIT_GREATER_EQUAL:
+ case SLJIT_D_GREATER_EQUAL:
GET_CR_BIT(4 + 0, reg);
INVERT_BIT(reg);
break;
- case SLJIT_C_GREATER:
- case SLJIT_C_FLOAT_GREATER:
+ case SLJIT_GREATER:
+ case SLJIT_D_GREATER:
GET_CR_BIT(4 + 1, reg);
break;
- case SLJIT_C_LESS_EQUAL:
- case SLJIT_C_FLOAT_LESS_EQUAL:
+ case SLJIT_LESS_EQUAL:
+ case SLJIT_D_LESS_EQUAL:
GET_CR_BIT(4 + 1, reg);
INVERT_BIT(reg);
break;
- case SLJIT_C_SIG_LESS:
+ case SLJIT_SIG_LESS:
GET_CR_BIT(0, reg);
break;
- case SLJIT_C_SIG_GREATER_EQUAL:
+ case SLJIT_SIG_GREATER_EQUAL:
GET_CR_BIT(0, reg);
INVERT_BIT(reg);
break;
- case SLJIT_C_SIG_GREATER:
+ case SLJIT_SIG_GREATER:
GET_CR_BIT(1, reg);
break;
- case SLJIT_C_SIG_LESS_EQUAL:
+ case SLJIT_SIG_LESS_EQUAL:
GET_CR_BIT(1, reg);
INVERT_BIT(reg);
break;
- case SLJIT_C_OVERFLOW:
- case SLJIT_C_MUL_OVERFLOW:
+ case SLJIT_OVERFLOW:
+ case SLJIT_MUL_OVERFLOW:
GET_CR_BIT(3, reg);
break;
- case SLJIT_C_NOT_OVERFLOW:
- case SLJIT_C_MUL_NOT_OVERFLOW:
+ case SLJIT_NOT_OVERFLOW:
+ case SLJIT_MUL_NOT_OVERFLOW:
GET_CR_BIT(3, reg);
INVERT_BIT(reg);
break;
- case SLJIT_C_FLOAT_EQUAL:
+ case SLJIT_D_EQUAL:
GET_CR_BIT(4 + 2, reg);
break;
- case SLJIT_C_FLOAT_NOT_EQUAL:
+ case SLJIT_D_NOT_EQUAL:
GET_CR_BIT(4 + 2, reg);
INVERT_BIT(reg);
break;
- case SLJIT_C_FLOAT_UNORDERED:
+ case SLJIT_D_UNORDERED:
GET_CR_BIT(4 + 3, reg);
break;
- case SLJIT_C_FLOAT_ORDERED:
+ case SLJIT_D_ORDERED:
GET_CR_BIT(4 + 3, reg);
INVERT_BIT(reg);
break;
@@ -2360,7 +2344,8 @@
return emit_op(compiler, op, input_flags, dst, dstw, TMP_REG1, 0, TMP_REG2, 0);
}
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+ || (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
compiler->skip_checks = 1;
#endif
return sljit_emit_op2(compiler, op | flags, dst, original_dstw, src, srcw, TMP_REG2, 0);
@@ -2372,7 +2357,7 @@
sljit_si reg;
CHECK_ERROR_PTR();
- check_sljit_emit_const(compiler, dst, dstw, init_value);
+ CHECK_PTR(check_sljit_emit_const(compiler, dst, dstw, init_value));
ADJUST_LOCAL_OFFSET(dst, dstw);
const_ = (struct sljit_const*)ensure_abuf(compiler, sizeof(struct sljit_const));
diff --git a/dist/sljit/sljitNativeSPARC_common.c b/dist/sljit/sljitNativeSPARC_common.c
index 8926a60..0b1927a 100644
--- a/dist/sljit/sljitNativeSPARC_common.c
+++ b/dist/sljit/sljitNativeSPARC_common.c
@@ -283,7 +283,7 @@
struct sljit_const *const_;
CHECK_ERROR_PTR();
- check_sljit_generate_code(compiler);
+ CHECK_PTR(check_sljit_generate_code(compiler));
reverse_buf(compiler);
code = (sljit_ins*)SLJIT_MALLOC_EXEC(compiler->size * sizeof(sljit_ins));
@@ -423,18 +423,10 @@
sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
{
CHECK_ERROR();
- check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+ CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
-
- local_size = (local_size + FIXED_LOCALS_OFFSET + 7) & ~0x7;
+ local_size = (local_size + SLJIT_LOCALS_OFFSET + 7) & ~0x7;
compiler->local_size = local_size;
if (local_size <= SIMM_MAX) {
@@ -450,29 +442,22 @@
return SLJIT_SUCCESS;
}
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
{
- CHECK_ERROR_VOID();
- check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+ CHECK_ERROR();
+ CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
-
- compiler->local_size = (local_size + FIXED_LOCALS_OFFSET + 7) & ~0x7;
+ compiler->local_size = (local_size + SLJIT_LOCALS_OFFSET + 7) & ~0x7;
+ return SLJIT_SUCCESS;
}
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
{
CHECK_ERROR();
- check_sljit_emit_return(compiler, op, src, srcw);
+ CHECK(check_sljit_emit_return(compiler, op, src, srcw));
if (op != SLJIT_MOV || !FAST_IS_REG(src)) {
FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
@@ -776,7 +761,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op)
{
CHECK_ERROR();
- check_sljit_emit_op0(compiler, op);
+ CHECK(check_sljit_emit_op0(compiler, op));
op = GET_OPCODE(op);
switch (op) {
@@ -784,25 +769,25 @@
return push_inst(compiler, TA, UNMOVABLE_INS);
case SLJIT_NOP:
return push_inst(compiler, NOP, UNMOVABLE_INS);
- case SLJIT_UMUL:
- case SLJIT_SMUL:
+ case SLJIT_LUMUL:
+ case SLJIT_LSMUL:
#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
- FAIL_IF(push_inst(compiler, (op == SLJIT_UMUL ? UMUL : SMUL) | D(SLJIT_R0) | S1(SLJIT_R0) | S2(SLJIT_R1), DR(SLJIT_R0)));
+ FAIL_IF(push_inst(compiler, (op == SLJIT_LUMUL ? UMUL : SMUL) | D(SLJIT_R0) | S1(SLJIT_R0) | S2(SLJIT_R1), DR(SLJIT_R0)));
return push_inst(compiler, RDY | D(SLJIT_R1), DR(SLJIT_R1));
#else
#error "Implementation required"
#endif
- case SLJIT_UDIV:
- case SLJIT_SDIV:
+ case SLJIT_LUDIV:
+ case SLJIT_LSDIV:
#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
- if (op == SLJIT_UDIV)
+ if (op == SLJIT_LUDIV)
FAIL_IF(push_inst(compiler, WRY | S1(0), MOVABLE_INS));
else {
FAIL_IF(push_inst(compiler, SRA | D(TMP_REG1) | S1(SLJIT_R0) | IMM(31), DR(TMP_REG1)));
FAIL_IF(push_inst(compiler, WRY | S1(TMP_REG1), MOVABLE_INS));
}
FAIL_IF(push_inst(compiler, OR | D(TMP_REG2) | S1(0) | S2(SLJIT_R0), DR(TMP_REG2)));
- FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? UDIV : SDIV) | D(SLJIT_R0) | S1(SLJIT_R0) | S2(SLJIT_R1), DR(SLJIT_R0)));
+ FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? UDIV : SDIV) | D(SLJIT_R0) | S1(SLJIT_R0) | S2(SLJIT_R1), DR(SLJIT_R0)));
FAIL_IF(push_inst(compiler, SMUL | D(SLJIT_R1) | S1(SLJIT_R0) | S2(SLJIT_R1), DR(SLJIT_R1)));
FAIL_IF(push_inst(compiler, SUB | D(SLJIT_R1) | S1(TMP_REG2) | S2(SLJIT_R1), DR(SLJIT_R1)));
return SLJIT_SUCCESS;
@@ -821,7 +806,7 @@
sljit_si flags = GET_FLAGS(op) ? SET_FLAGS : 0;
CHECK_ERROR();
- check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+ CHECK(check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src, srcw);
@@ -890,7 +875,7 @@
sljit_si flags = GET_FLAGS(op) ? SET_FLAGS : 0;
CHECK_ERROR();
- check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+ CHECK(check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src1, src1w);
ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -926,13 +911,13 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg)
{
- check_sljit_get_register_index(reg);
+ CHECK_REG_INDEX(check_sljit_get_register_index(reg));
return reg_map[reg];
}
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg)
{
- check_sljit_get_float_register_index(reg);
+ CHECK_REG_INDEX(check_sljit_get_float_register_index(reg));
return reg << 1;
}
@@ -940,8 +925,7 @@
void *instruction, sljit_si size)
{
CHECK_ERROR();
- check_sljit_emit_op_custom(compiler, instruction, size);
- SLJIT_ASSERT(size == 4);
+ CHECK(check_sljit_emit_op_custom(compiler, instruction, size));
return push_inst(compiler, *(sljit_ins*)instruction, UNMOVABLE_INS);
}
@@ -1066,7 +1050,7 @@
src <<= 1;
switch (GET_OPCODE(op)) {
- case SLJIT_MOVD:
+ case SLJIT_DMOV:
if (src != dst_r) {
if (dst_r != TMP_FREG1) {
FAIL_IF(push_inst(compiler, FMOVS | DA(dst_r) | S2A(src), MOVABLE_INS));
@@ -1077,12 +1061,12 @@
dst_r = src;
}
break;
- case SLJIT_NEGD:
+ case SLJIT_DNEG:
FAIL_IF(push_inst(compiler, FNEGS | DA(dst_r) | S2A(src), MOVABLE_INS));
if (dst_r != src && !(op & SLJIT_SINGLE_OP))
FAIL_IF(push_inst(compiler, FMOVS | DA(dst_r | 1) | S2A(src | 1), MOVABLE_INS));
break;
- case SLJIT_ABSD:
+ case SLJIT_DABS:
FAIL_IF(push_inst(compiler, FABSS | DA(dst_r) | S2A(src), MOVABLE_INS));
if (dst_r != src && !(op & SLJIT_SINGLE_OP))
FAIL_IF(push_inst(compiler, FMOVS | DA(dst_r | 1) | S2A(src | 1), MOVABLE_INS));
@@ -1106,7 +1090,7 @@
sljit_si dst_r, flags = 0;
CHECK_ERROR();
- check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+ CHECK(check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src1, src1w);
ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1157,19 +1141,19 @@
src2 = TMP_FREG2;
switch (GET_OPCODE(op)) {
- case SLJIT_ADDD:
+ case SLJIT_DADD:
FAIL_IF(push_inst(compiler, SELECT_FOP(op, FADDS, FADDD) | DA(dst_r) | S1A(src1) | S2A(src2), MOVABLE_INS));
break;
- case SLJIT_SUBD:
+ case SLJIT_DSUB:
FAIL_IF(push_inst(compiler, SELECT_FOP(op, FSUBS, FSUBD) | DA(dst_r) | S1A(src1) | S2A(src2), MOVABLE_INS));
break;
- case SLJIT_MULD:
+ case SLJIT_DMUL:
FAIL_IF(push_inst(compiler, SELECT_FOP(op, FMULS, FMULD) | DA(dst_r) | S1A(src1) | S2A(src2), MOVABLE_INS));
break;
- case SLJIT_DIVD:
+ case SLJIT_DDIV:
FAIL_IF(push_inst(compiler, SELECT_FOP(op, FDIVS, FDIVD) | DA(dst_r) | S1A(src1) | S2A(src2), MOVABLE_INS));
break;
}
@@ -1190,7 +1174,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
{
CHECK_ERROR();
- check_sljit_emit_fast_enter(compiler, dst, dstw);
+ CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
ADJUST_LOCAL_OFFSET(dst, dstw);
/* For UNUSED dst. Uncommon, but possible. */
@@ -1207,7 +1191,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
{
CHECK_ERROR();
- check_sljit_emit_fast_return(compiler, src, srcw);
+ CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
ADJUST_LOCAL_OFFSET(src, srcw);
if (FAST_IS_REG(src))
@@ -1230,7 +1214,7 @@
struct sljit_label *label;
CHECK_ERROR_PTR();
- check_sljit_emit_label(compiler);
+ CHECK_PTR(check_sljit_emit_label(compiler));
if (compiler->last_label && compiler->last_label->size == compiler->size)
return compiler->last_label;
@@ -1245,66 +1229,50 @@
static sljit_ins get_cc(sljit_si type)
{
switch (type) {
- case SLJIT_C_EQUAL:
- case SLJIT_C_MUL_NOT_OVERFLOW:
+ case SLJIT_EQUAL:
+ case SLJIT_MUL_NOT_OVERFLOW:
+ case SLJIT_D_NOT_EQUAL: /* Unordered. */
return DA(0x1);
- case SLJIT_C_NOT_EQUAL:
- case SLJIT_C_MUL_OVERFLOW:
+ case SLJIT_NOT_EQUAL:
+ case SLJIT_MUL_OVERFLOW:
+ case SLJIT_D_EQUAL:
return DA(0x9);
- case SLJIT_C_LESS:
+ case SLJIT_LESS:
+ case SLJIT_D_GREATER: /* Unordered. */
return DA(0x5);
- case SLJIT_C_GREATER_EQUAL:
+ case SLJIT_GREATER_EQUAL:
+ case SLJIT_D_LESS_EQUAL:
return DA(0xd);
- case SLJIT_C_GREATER:
+ case SLJIT_GREATER:
+ case SLJIT_D_GREATER_EQUAL: /* Unordered. */
return DA(0xc);
- case SLJIT_C_LESS_EQUAL:
+ case SLJIT_LESS_EQUAL:
+ case SLJIT_D_LESS:
return DA(0x4);
- case SLJIT_C_SIG_LESS:
+ case SLJIT_SIG_LESS:
return DA(0x3);
- case SLJIT_C_SIG_GREATER_EQUAL:
+ case SLJIT_SIG_GREATER_EQUAL:
return DA(0xb);
- case SLJIT_C_SIG_GREATER:
+ case SLJIT_SIG_GREATER:
return DA(0xa);
- case SLJIT_C_SIG_LESS_EQUAL:
+ case SLJIT_SIG_LESS_EQUAL:
return DA(0x2);
- case SLJIT_C_OVERFLOW:
+ case SLJIT_OVERFLOW:
+ case SLJIT_D_UNORDERED:
return DA(0x7);
- case SLJIT_C_NOT_OVERFLOW:
- return DA(0xf);
-
- case SLJIT_C_FLOAT_EQUAL:
- return DA(0x9);
-
- case SLJIT_C_FLOAT_NOT_EQUAL: /* Unordered. */
- return DA(0x1);
-
- case SLJIT_C_FLOAT_LESS:
- return DA(0x4);
-
- case SLJIT_C_FLOAT_GREATER_EQUAL: /* Unordered. */
- return DA(0xc);
-
- case SLJIT_C_FLOAT_LESS_EQUAL:
- return DA(0xd);
-
- case SLJIT_C_FLOAT_GREATER: /* Unordered. */
- return DA(0x5);
-
- case SLJIT_C_FLOAT_UNORDERED:
- return DA(0x7);
-
- case SLJIT_C_FLOAT_ORDERED:
+ case SLJIT_NOT_OVERFLOW:
+ case SLJIT_D_ORDERED:
return DA(0xf);
default:
@@ -1318,14 +1286,14 @@
struct sljit_jump *jump;
CHECK_ERROR_PTR();
- check_sljit_emit_jump(compiler, type);
+ CHECK_PTR(check_sljit_emit_jump(compiler, type));
jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
PTR_FAIL_IF(!jump);
set_jump(jump, compiler, type & SLJIT_REWRITABLE_JUMP);
type &= 0xff;
- if (type < SLJIT_C_FLOAT_EQUAL) {
+ if (type < SLJIT_D_EQUAL) {
jump->flags |= IS_COND;
if (((compiler->delay_slot & DST_INS_MASK) != UNMOVABLE_INS) && !(compiler->delay_slot & ICC_IS_SET))
jump->flags |= IS_MOVABLE;
@@ -1365,7 +1333,7 @@
sljit_si src_r;
CHECK_ERROR();
- check_sljit_emit_ijump(compiler, type, src, srcw);
+ CHECK(check_sljit_emit_ijump(compiler, type, src, srcw));
ADJUST_LOCAL_OFFSET(src, srcw);
if (FAST_IS_REG(src))
@@ -1402,7 +1370,7 @@
sljit_si reg, flags = (GET_FLAGS(op) ? SET_FLAGS : 0);
CHECK_ERROR();
- check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+ CHECK(check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type));
ADJUST_LOCAL_OFFSET(dst, dstw);
if (dst == SLJIT_UNUSED)
@@ -1421,7 +1389,8 @@
srcw = 0;
}
- if (type < SLJIT_C_FLOAT_EQUAL)
+ type &= 0xff;
+ if (type < SLJIT_D_EQUAL)
FAIL_IF(push_inst(compiler, BICC | get_cc(type) | 3, UNMOVABLE_INS));
else
FAIL_IF(push_inst(compiler, FBFCC | get_cc(type) | 3, UNMOVABLE_INS));
@@ -1444,7 +1413,7 @@
struct sljit_const *const_;
CHECK_ERROR_PTR();
- check_sljit_emit_const(compiler, dst, dstw, init_value);
+ CHECK_PTR(check_sljit_emit_const(compiler, dst, dstw, init_value));
ADJUST_LOCAL_OFFSET(dst, dstw);
const_ = (struct sljit_const*)ensure_abuf(compiler, sizeof(struct sljit_const));
diff --git a/dist/sljit/sljitNativeTILEGX_64.c b/dist/sljit/sljitNativeTILEGX_64.c
index fb4cd38..1d6aa5a 100644
--- a/dist/sljit/sljitNativeTILEGX_64.c
+++ b/dist/sljit/sljitNativeTILEGX_64.c
@@ -1182,15 +1182,7 @@
CHECK_ERROR();
check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
+ set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
local_size += (saveds + 1) * sizeof(sljit_sw);
local_size = (local_size + 7) & ~7;
@@ -1244,15 +1236,7 @@
{
CHECK_ERROR_VOID();
check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
+ set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
local_size += (saveds + 1) * sizeof(sljit_sw);
compiler->local_size = (local_size + 7) & ~7;
diff --git a/dist/sljit/sljitNativeX86_32.c b/dist/sljit/sljitNativeX86_32.c
index 515bf7e..d7129c8 100644
--- a/dist/sljit/sljitNativeX86_32.c
+++ b/dist/sljit/sljitNativeX86_32.c
@@ -71,18 +71,11 @@
sljit_ub *inst;
CHECK_ERROR();
- check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+ CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
compiler->args = args;
compiler->flags_saved = 0;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
size = 1 + (scratches > 7 ? (scratches - 7) : 0) + (saveds <= 3 ? saveds : 3);
#if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL)
@@ -141,14 +134,33 @@
}
#endif
- SLJIT_COMPILE_ASSERT(FIXED_LOCALS_OFFSET >= (2 + 4) * sizeof(sljit_uw), require_at_least_two_words);
+ SLJIT_COMPILE_ASSERT(SLJIT_LOCALS_OFFSET >= (2 + 4) * sizeof(sljit_uw), require_at_least_two_words);
#if defined(__APPLE__)
- /* Ignore pushed registers and FIXED_LOCALS_OFFSET when
- computing the aligned local size. */
+ /* Ignore pushed registers and SLJIT_LOCALS_OFFSET when computing the aligned local size. */
saveds = (2 + (scratches > 7 ? (scratches - 7) : 0) + (saveds <= 3 ? saveds : 3)) * sizeof(sljit_uw);
- local_size = ((FIXED_LOCALS_OFFSET + saveds + local_size + 15) & ~15) - saveds;
+ local_size = ((SLJIT_LOCALS_OFFSET + saveds + local_size + 15) & ~15) - saveds;
#else
- local_size = FIXED_LOCALS_OFFSET + ((local_size + sizeof(sljit_uw) - 1) & ~(sizeof(sljit_uw) - 1));
+ if (options & SLJIT_DOUBLE_ALIGNMENT) {
+ local_size = SLJIT_LOCALS_OFFSET + ((local_size + 7) & ~7);
+
+ inst = (sljit_ub*)ensure_buf(compiler, 1 + 17);
+ FAIL_IF(!inst);
+
+ INC_SIZE(17);
+ inst[0] = MOV_r_rm;
+ inst[1] = MOD_REG | (reg_map[TMP_REG1] << 3) | reg_map[SLJIT_SP];
+ inst[2] = GROUP_F7;
+ inst[3] = MOD_REG | (0 << 3) | reg_map[SLJIT_SP];
+ *(sljit_sw*)(inst + 4) = 0x4;
+ inst[8] = JNE_i8;
+ inst[9] = 6;
+ inst[10] = GROUP_BINARY_81;
+ inst[11] = MOD_REG | (5 << 3) | reg_map[SLJIT_SP];
+ *(sljit_sw*)(inst + 12) = 0x4;
+ inst[16] = PUSH_r + reg_map[TMP_REG1];
+ }
+ else
+ local_size = SLJIT_LOCALS_OFFSET + ((local_size + 3) & ~3);
#endif
compiler->local_size = local_size;
@@ -157,10 +169,10 @@
#if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL)
FAIL_IF(emit_do_imm(compiler, MOV_r_i32 + reg_map[SLJIT_R0], local_size));
#else
- local_size -= FIXED_LOCALS_OFFSET;
+ local_size -= SLJIT_LOCALS_OFFSET;
FAIL_IF(emit_do_imm(compiler, MOV_r_i32 + reg_map[SLJIT_R0], local_size));
FAIL_IF(emit_non_cum_binary(compiler, SUB_r_rm, SUB_rm_r, SUB, SUB_EAX_i32,
- SLJIT_SP, 0, SLJIT_SP, 0, SLJIT_IMM, FIXED_LOCALS_OFFSET));
+ SLJIT_SP, 0, SLJIT_SP, 0, SLJIT_IMM, SLJIT_LOCALS_OFFSET));
#endif
FAIL_IF(sljit_emit_ijump(compiler, SLJIT_CALL1, SLJIT_IMM, SLJIT_FUNC_OFFSET(sljit_grow_stack)));
}
@@ -171,29 +183,26 @@
SLJIT_SP, 0, SLJIT_SP, 0, SLJIT_IMM, local_size);
}
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
{
- CHECK_ERROR_VOID();
- check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+ CHECK_ERROR();
+ CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
compiler->args = args;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
#if defined(__APPLE__)
saveds = (2 + (scratches > 7 ? (scratches - 7) : 0) + (saveds <= 3 ? saveds : 3)) * sizeof(sljit_uw);
- compiler->local_size = ((FIXED_LOCALS_OFFSET + saveds + local_size + 15) & ~15) - saveds;
+ compiler->local_size = ((SLJIT_LOCALS_OFFSET + saveds + local_size + 15) & ~15) - saveds;
#else
- compiler->local_size = FIXED_LOCALS_OFFSET + ((local_size + sizeof(sljit_uw) - 1) & ~(sizeof(sljit_uw) - 1));
+ if (options & SLJIT_DOUBLE_ALIGNMENT)
+ compiler->local_size = SLJIT_LOCALS_OFFSET + ((local_size + 7) & ~7);
+ else
+ compiler->local_size = SLJIT_LOCALS_OFFSET + ((local_size + 3) & ~3);
#endif
+ return SLJIT_SUCCESS;
}
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
@@ -202,7 +211,7 @@
sljit_ub *inst;
CHECK_ERROR();
- check_sljit_emit_return(compiler, op, src, srcw);
+ CHECK(check_sljit_emit_return(compiler, op, src, srcw));
SLJIT_ASSERT(compiler->args >= 0);
compiler->flags_saved = 0;
@@ -212,6 +221,18 @@
FAIL_IF(emit_cum_binary(compiler, ADD_r_rm, ADD_rm_r, ADD, ADD_EAX_i32,
SLJIT_SP, 0, SLJIT_SP, 0, SLJIT_IMM, compiler->local_size));
+#if !defined(__APPLE__)
+ if (compiler->options & SLJIT_DOUBLE_ALIGNMENT) {
+ inst = (sljit_ub*)ensure_buf(compiler, 1 + 3);
+ FAIL_IF(!inst);
+
+ INC_SIZE(3);
+ inst[0] = MOV_r_rm;
+ inst[1] = (reg_map[SLJIT_SP] << 3) | 0x4 /* SIB */;
+ inst[2] = (4 << 3) | reg_map[SLJIT_SP];
+ }
+#endif
+
size = 2 + (compiler->scratches > 7 ? (compiler->scratches - 7) : 0) +
(compiler->saveds <= 3 ? compiler->saveds : 3);
#if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL)
@@ -460,7 +481,7 @@
sljit_ub *inst;
CHECK_ERROR();
- check_sljit_emit_fast_enter(compiler, dst, dstw);
+ CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
ADJUST_LOCAL_OFFSET(dst, dstw);
CHECK_EXTRA_REGS(dst, dstw, (void)0);
@@ -491,7 +512,7 @@
sljit_ub *inst;
CHECK_ERROR();
- check_sljit_emit_fast_return(compiler, src, srcw);
+ CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
ADJUST_LOCAL_OFFSET(src, srcw);
CHECK_EXTRA_REGS(src, srcw, (void)0);
diff --git a/dist/sljit/sljitNativeX86_64.c b/dist/sljit/sljitNativeX86_64.c
index f356f1c..1790d8a 100644
--- a/dist/sljit/sljitNativeX86_64.c
+++ b/dist/sljit/sljitNativeX86_64.c
@@ -95,17 +95,10 @@
sljit_ub *inst;
CHECK_ERROR();
- check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+ CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
compiler->flags_saved = 0;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
/* Including the return address saved by the call instruction. */
saved_register_size = GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1);
@@ -173,7 +166,7 @@
#endif
}
- local_size = ((local_size + FIXED_LOCALS_OFFSET + saved_register_size + 16 - 1) & ~(16 - 1)) - saved_register_size;
+ local_size = ((local_size + SLJIT_LOCALS_OFFSET + saved_register_size + 15) & ~15) - saved_register_size;
compiler->local_size = local_size;
#ifdef _WIN64
@@ -201,7 +194,8 @@
*inst++ = MOV_rm_i32;
*inst++ = MOD_REG | reg_lmap[SLJIT_R0];
*(sljit_si*)inst = local_size;
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+ || (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
compiler->skip_checks = 1;
#endif
FAIL_IF(sljit_emit_ijump(compiler, SLJIT_CALL1, SLJIT_IMM, SLJIT_FUNC_OFFSET(sljit_grow_stack)));
@@ -243,27 +237,20 @@
return SLJIT_SUCCESS;
}
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
{
sljit_si saved_register_size;
- CHECK_ERROR_VOID();
- check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
- compiler->options = options;
- compiler->scratches = scratches;
- compiler->saveds = saveds;
- compiler->fscratches = fscratches;
- compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
- compiler->logical_local_size = local_size;
-#endif
+ CHECK_ERROR();
+ CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+ set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
/* Including the return address saved by the call instruction. */
saved_register_size = GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1);
- compiler->local_size = ((local_size + FIXED_LOCALS_OFFSET + saved_register_size + 16 - 1) & ~(16 - 1)) - saved_register_size;
+ compiler->local_size = ((local_size + SLJIT_LOCALS_OFFSET + saved_register_size + 15) & ~15) - saved_register_size;
+ return SLJIT_SUCCESS;
}
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
@@ -272,7 +259,7 @@
sljit_ub *inst;
CHECK_ERROR();
- check_sljit_emit_return(compiler, op, src, srcw);
+ CHECK(check_sljit_emit_return(compiler, op, src, srcw));
compiler->flags_saved = 0;
FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
@@ -607,7 +594,7 @@
sljit_ub *inst;
CHECK_ERROR();
- check_sljit_emit_fast_enter(compiler, dst, dstw);
+ CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
ADJUST_LOCAL_OFFSET(dst, dstw);
/* For UNUSED dst. Uncommon, but possible. */
@@ -644,7 +631,7 @@
sljit_ub *inst;
CHECK_ERROR();
- check_sljit_emit_fast_return(compiler, src, srcw);
+ CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
ADJUST_LOCAL_OFFSET(src, srcw);
if ((src & SLJIT_IMM) && NOT_HALFWORD(srcw)) {
diff --git a/dist/sljit/sljitNativeX86_common.c b/dist/sljit/sljitNativeX86_common.c
index 71442fe..22a163f 100644
--- a/dist/sljit/sljitNativeX86_common.c
+++ b/dist/sljit/sljitNativeX86_common.c
@@ -72,7 +72,7 @@
#define CHECK_EXTRA_REGS(p, w, do) \
if (p >= SLJIT_R3 && p <= SLJIT_R6) { \
- w = FIXED_LOCALS_OFFSET + ((p) - (SLJIT_R3 + 4)) * sizeof(sljit_sw); \
+ w = SLJIT_LOCALS_OFFSET + ((p) - (SLJIT_R3 + 4)) * sizeof(sljit_sw); \
p = SLJIT_MEM1(SLJIT_SP); \
do; \
}
@@ -183,6 +183,7 @@
#define IMUL_r_rm_i8 0x6b
#define IMUL_r_rm_i32 0x69
#define JE_i8 0x74
+#define JNE_i8 0x75
#define JMP_i8 0xeb
#define JMP_i32 0xe9
#define JMP_rm (/* GROUP_FF */ 4 << 3)
@@ -330,54 +331,54 @@
static sljit_ub get_jump_code(sljit_si type)
{
switch (type) {
- case SLJIT_C_EQUAL:
- case SLJIT_C_FLOAT_EQUAL:
+ case SLJIT_EQUAL:
+ case SLJIT_D_EQUAL:
return 0x84 /* je */;
- case SLJIT_C_NOT_EQUAL:
- case SLJIT_C_FLOAT_NOT_EQUAL:
+ case SLJIT_NOT_EQUAL:
+ case SLJIT_D_NOT_EQUAL:
return 0x85 /* jne */;
- case SLJIT_C_LESS:
- case SLJIT_C_FLOAT_LESS:
+ case SLJIT_LESS:
+ case SLJIT_D_LESS:
return 0x82 /* jc */;
- case SLJIT_C_GREATER_EQUAL:
- case SLJIT_C_FLOAT_GREATER_EQUAL:
+ case SLJIT_GREATER_EQUAL:
+ case SLJIT_D_GREATER_EQUAL:
return 0x83 /* jae */;
- case SLJIT_C_GREATER:
- case SLJIT_C_FLOAT_GREATER:
+ case SLJIT_GREATER:
+ case SLJIT_D_GREATER:
return 0x87 /* jnbe */;
- case SLJIT_C_LESS_EQUAL:
- case SLJIT_C_FLOAT_LESS_EQUAL:
+ case SLJIT_LESS_EQUAL:
+ case SLJIT_D_LESS_EQUAL:
return 0x86 /* jbe */;
- case SLJIT_C_SIG_LESS:
+ case SLJIT_SIG_LESS:
return 0x8c /* jl */;
- case SLJIT_C_SIG_GREATER_EQUAL:
+ case SLJIT_SIG_GREATER_EQUAL:
return 0x8d /* jnl */;
- case SLJIT_C_SIG_GREATER:
+ case SLJIT_SIG_GREATER:
return 0x8f /* jnle */;
- case SLJIT_C_SIG_LESS_EQUAL:
+ case SLJIT_SIG_LESS_EQUAL:
return 0x8e /* jle */;
- case SLJIT_C_OVERFLOW:
- case SLJIT_C_MUL_OVERFLOW:
+ case SLJIT_OVERFLOW:
+ case SLJIT_MUL_OVERFLOW:
return 0x80 /* jo */;
- case SLJIT_C_NOT_OVERFLOW:
- case SLJIT_C_MUL_NOT_OVERFLOW:
+ case SLJIT_NOT_OVERFLOW:
+ case SLJIT_MUL_NOT_OVERFLOW:
return 0x81 /* jno */;
- case SLJIT_C_FLOAT_UNORDERED:
+ case SLJIT_D_UNORDERED:
return 0x8a /* jp */;
- case SLJIT_C_FLOAT_ORDERED:
+ case SLJIT_D_ORDERED:
return 0x8b /* jpo */;
}
return 0;
@@ -456,7 +457,7 @@
struct sljit_const *const_;
CHECK_ERROR_PTR();
- check_sljit_generate_code(compiler);
+ CHECK_PTR(check_sljit_generate_code(compiler));
reverse_buf(compiler);
/* Second code generation pass. */
@@ -724,7 +725,7 @@
#endif
CHECK_ERROR();
- check_sljit_emit_op0(compiler, op);
+ CHECK(check_sljit_emit_op0(compiler, op));
switch (GET_OPCODE(op)) {
case SLJIT_BREAKPOINT:
@@ -739,10 +740,10 @@
INC_SIZE(1);
*inst = NOP;
break;
- case SLJIT_UMUL:
- case SLJIT_SMUL:
- case SLJIT_UDIV:
- case SLJIT_SDIV:
+ case SLJIT_LUMUL:
+ case SLJIT_LSMUL:
+ case SLJIT_LUDIV:
+ case SLJIT_LSDIV:
compiler->flags_saved = 0;
#if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
#ifdef _WIN64
@@ -762,7 +763,7 @@
#endif
op = GET_OPCODE(op);
- if (op == SLJIT_UDIV) {
+ if (op == SLJIT_LUDIV) {
#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || defined(_WIN64)
EMIT_MOV(compiler, TMP_REG1, 0, SLJIT_R1, 0);
inst = emit_x86_instruction(compiler, 1, SLJIT_R1, 0, SLJIT_R1, 0);
@@ -773,7 +774,7 @@
*inst = XOR_r_rm;
}
- if (op == SLJIT_SDIV) {
+ if (op == SLJIT_LSDIV) {
#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || defined(_WIN64)
EMIT_MOV(compiler, TMP_REG1, 0, SLJIT_R1, 0);
#endif
@@ -804,10 +805,10 @@
FAIL_IF(!inst);
INC_SIZE(2);
*inst++ = GROUP_F7;
- *inst = MOD_REG | ((op >= SLJIT_UDIV) ? reg_map[TMP_REG1] : reg_map[SLJIT_R1]);
+ *inst = MOD_REG | ((op >= SLJIT_LUDIV) ? reg_map[TMP_REG1] : reg_map[SLJIT_R1]);
#else
#ifdef _WIN64
- size = (!compiler->mode32 || op >= SLJIT_UDIV) ? 3 : 2;
+ size = (!compiler->mode32 || op >= SLJIT_LUDIV) ? 3 : 2;
#else
size = (!compiler->mode32) ? 3 : 2;
#endif
@@ -816,11 +817,11 @@
INC_SIZE(size);
#ifdef _WIN64
if (!compiler->mode32)
- *inst++ = REX_W | ((op >= SLJIT_UDIV) ? REX_B : 0);
- else if (op >= SLJIT_UDIV)
+ *inst++ = REX_W | ((op >= SLJIT_LUDIV) ? REX_B : 0);
+ else if (op >= SLJIT_LUDIV)
*inst++ = REX_B;
*inst++ = GROUP_F7;
- *inst = MOD_REG | ((op >= SLJIT_UDIV) ? reg_lmap[TMP_REG1] : reg_lmap[SLJIT_R1]);
+ *inst = MOD_REG | ((op >= SLJIT_LUDIV) ? reg_lmap[TMP_REG1] : reg_lmap[SLJIT_R1]);
#else
if (!compiler->mode32)
*inst++ = REX_W;
@@ -829,16 +830,16 @@
#endif
#endif
switch (op) {
- case SLJIT_UMUL:
+ case SLJIT_LUMUL:
*inst |= MUL;
break;
- case SLJIT_SMUL:
+ case SLJIT_LSMUL:
*inst |= IMUL;
break;
- case SLJIT_UDIV:
+ case SLJIT_LUDIV:
*inst |= DIV;
break;
- case SLJIT_SDIV:
+ case SLJIT_LSDIV:
*inst |= IDIV;
break;
}
@@ -1258,7 +1259,7 @@
#endif
CHECK_ERROR();
- check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+ CHECK(check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src, srcw);
@@ -1743,7 +1744,7 @@
*(sljit_si*)inst = (sljit_si)src2w;
}
else {
- EMIT_MOV(compiler, TMP_REG2, 0, SLJIT_IMM, src1w);
+ EMIT_MOV(compiler, TMP_REG2, 0, SLJIT_IMM, src2w);
if (dst_r != src1)
EMIT_MOV(compiler, dst_r, 0, src1, src1w);
inst = emit_x86_instruction(compiler, 2, dst_r, 0, TMP_REG2, 0);
@@ -2118,7 +2119,7 @@
sljit_si src2, sljit_sw src2w)
{
CHECK_ERROR();
- check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+ CHECK(check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src1, src1w);
ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -2209,7 +2210,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg)
{
- check_sljit_get_register_index(reg);
+ CHECK_REG_INDEX(check_sljit_get_register_index(reg));
#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
if (reg >= SLJIT_R3 && reg <= SLJIT_R6)
return -1;
@@ -2219,7 +2220,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg)
{
- check_sljit_get_float_register_index(reg);
+ CHECK_REG_INDEX(check_sljit_get_float_register_index(reg));
return reg;
}
@@ -2229,8 +2230,7 @@
sljit_ub *inst;
CHECK_ERROR();
- check_sljit_emit_op_custom(compiler, instruction, size);
- SLJIT_ASSERT(size > 0 && size < 16);
+ CHECK(check_sljit_emit_op_custom(compiler, instruction, size));
inst = (sljit_ub*)ensure_buf(compiler, 1 + size);
FAIL_IF(!inst);
@@ -2391,7 +2391,7 @@
CHECK_ERROR();
SELECT_FOP1_OPERATION_WITH_CHECKS(compiler, op, dst, dstw, src, srcw);
- if (GET_OPCODE(op) == SLJIT_MOVD) {
+ if (GET_OPCODE(op) == SLJIT_DMOV) {
if (FAST_IS_REG(dst))
return emit_sse2_load(compiler, op & SLJIT_SINGLE_OP, dst, src, srcw);
if (FAST_IS_REG(src))
@@ -2430,11 +2430,11 @@
}
switch (GET_OPCODE(op)) {
- case SLJIT_NEGD:
+ case SLJIT_DNEG:
FAIL_IF(emit_sse2_logic(compiler, XORPD_x_xm, 1, dst_r, SLJIT_MEM0(), (sljit_sw)(op & SLJIT_SINGLE_OP ? sse2_buffer : sse2_buffer + 8)));
break;
- case SLJIT_ABSD:
+ case SLJIT_DABS:
FAIL_IF(emit_sse2_logic(compiler, ANDPD_x_xm, 1, dst_r, SLJIT_MEM0(), (sljit_sw)(op & SLJIT_SINGLE_OP ? sse2_buffer + 4 : sse2_buffer + 12)));
break;
}
@@ -2452,7 +2452,7 @@
sljit_si dst_r;
CHECK_ERROR();
- check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+ CHECK(check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
ADJUST_LOCAL_OFFSET(dst, dstw);
ADJUST_LOCAL_OFFSET(src1, src1w);
ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -2465,7 +2465,7 @@
dst_r = dst;
if (dst == src1)
; /* Do nothing here. */
- else if (dst == src2 && (op == SLJIT_ADDD || op == SLJIT_MULD)) {
+ else if (dst == src2 && (op == SLJIT_DADD || op == SLJIT_DMUL)) {
/* Swap arguments. */
src2 = src1;
src2w = src1w;
@@ -2483,19 +2483,19 @@
}
switch (GET_OPCODE(op)) {
- case SLJIT_ADDD:
+ case SLJIT_DADD:
FAIL_IF(emit_sse2(compiler, ADDSD_x_xm, op & SLJIT_SINGLE_OP, dst_r, src2, src2w));
break;
- case SLJIT_SUBD:
+ case SLJIT_DSUB:
FAIL_IF(emit_sse2(compiler, SUBSD_x_xm, op & SLJIT_SINGLE_OP, dst_r, src2, src2w));
break;
- case SLJIT_MULD:
+ case SLJIT_DMUL:
FAIL_IF(emit_sse2(compiler, MULSD_x_xm, op & SLJIT_SINGLE_OP, dst_r, src2, src2w));
break;
- case SLJIT_DIVD:
+ case SLJIT_DDIV:
FAIL_IF(emit_sse2(compiler, DIVSD_x_xm, op & SLJIT_SINGLE_OP, dst_r, src2, src2w));
break;
}
@@ -2515,7 +2515,7 @@
struct sljit_label *label;
CHECK_ERROR_PTR();
- check_sljit_emit_label(compiler);
+ CHECK_PTR(check_sljit_emit_label(compiler));
/* We should restore the flags before the label,
since other taken jumps has their own flags as well. */
@@ -2544,7 +2544,7 @@
struct sljit_jump *jump;
CHECK_ERROR_PTR();
- check_sljit_emit_jump(compiler, type);
+ CHECK_PTR(check_sljit_emit_jump(compiler, type));
if (SLJIT_UNLIKELY(compiler->flags_saved)) {
if ((type & 0xff) <= SLJIT_JUMP)
@@ -2581,7 +2581,7 @@
struct sljit_jump *jump;
CHECK_ERROR();
- check_sljit_emit_ijump(compiler, type, src, srcw);
+ CHECK(check_sljit_emit_ijump(compiler, type, src, srcw));
ADJUST_LOCAL_OFFSET(src, srcw);
CHECK_EXTRA_REGS(src, srcw, (void)0);
@@ -2660,7 +2660,8 @@
#endif
CHECK_ERROR();
- check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+ CHECK(check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type));
+ SLJIT_UNUSED_ARG(srcw);
if (dst == SLJIT_UNUSED)
return SLJIT_SUCCESS;
@@ -2670,6 +2671,7 @@
if (SLJIT_UNLIKELY(compiler->flags_saved))
FAIL_IF(emit_restore_flags(compiler, op & SLJIT_KEEP_FLAGS));
+ type &= 0xff;
/* setcc = jcc + 0x10. */
cond_set = get_jump_code(type) + 0x10;
@@ -2711,7 +2713,8 @@
compiler->mode32 = GET_OPCODE(op) != SLJIT_MOV;
return emit_mov(compiler, dst, dstw, TMP_REG1, 0);
}
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+ || (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
compiler->skip_checks = 1;
#endif
return sljit_emit_op2(compiler, op, dst, dstw, dst, dstw, TMP_REG1, 0);
@@ -2821,7 +2824,8 @@
if (GET_OPCODE(op) < SLJIT_ADD)
return emit_mov(compiler, dst, dstw, TMP_REG1, 0);
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+ || (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
compiler->skip_checks = 1;
#endif
return sljit_emit_op2(compiler, op, dst_save, dstw_save, dst_save, dstw_save, TMP_REG1, 0);
@@ -2831,7 +2835,7 @@
SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_local_base(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw offset)
{
CHECK_ERROR();
- check_sljit_get_local_base(compiler, dst, dstw, offset);
+ CHECK(check_sljit_get_local_base(compiler, dst, dstw, offset));
ADJUST_LOCAL_OFFSET(dst, dstw);
CHECK_EXTRA_REGS(dst, dstw, (void)0);
@@ -2868,7 +2872,7 @@
#endif
CHECK_ERROR_PTR();
- check_sljit_emit_const(compiler, dst, dstw, init_value);
+ CHECK_PTR(check_sljit_emit_const(compiler, dst, dstw, init_value));
ADJUST_LOCAL_OFFSET(dst, dstw);
CHECK_EXTRA_REGS(dst, dstw, (void)0);
diff --git a/dist/sljit/sljitUtils.c b/dist/sljit/sljitUtils.c
index b29b403..5294b5f 100644
--- a/dist/sljit/sljitUtils.c
+++ b/dist/sljit/sljitUtils.c
@@ -200,7 +200,7 @@
/* Planning to make it even more clever in the future. */
static sljit_sw sljit_page_align = 0;
-SLJIT_API_FUNC_ATTRIBUTE struct sljit_stack* SLJIT_CALL sljit_allocate_stack(sljit_uw limit, sljit_uw max_limit)
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_stack* SLJIT_CALL sljit_allocate_stack(sljit_uw limit, sljit_uw max_limit, void *allocator_data)
{
struct sljit_stack *stack;
union {
@@ -211,6 +211,7 @@
SYSTEM_INFO si;
#endif
+ SLJIT_UNUSED_ARG(allocator_data);
if (limit > max_limit || limit < 1)
return NULL;
@@ -232,21 +233,21 @@
/* Align limit and max_limit. */
max_limit = (max_limit + sljit_page_align) & ~sljit_page_align;
- stack = (struct sljit_stack*)SLJIT_MALLOC(sizeof(struct sljit_stack));
+ stack = (struct sljit_stack*)SLJIT_MALLOC(sizeof(struct sljit_stack), allocator_data);
if (!stack)
return NULL;
#ifdef _WIN32
base.ptr = VirtualAlloc(NULL, max_limit, MEM_RESERVE, PAGE_READWRITE);
if (!base.ptr) {
- SLJIT_FREE(stack);
+ SLJIT_FREE(stack, allocator_data);
return NULL;
}
stack->base = base.uw;
stack->limit = stack->base;
stack->max_limit = stack->base + max_limit;
if (sljit_stack_resize(stack, stack->base + limit)) {
- sljit_free_stack(stack);
+ sljit_free_stack(stack, allocator_data);
return NULL;
}
#else
@@ -255,14 +256,14 @@
#else
if (dev_zero < 0) {
if (open_dev_zero()) {
- SLJIT_FREE(stack);
+ SLJIT_FREE(stack, allocator_data);
return NULL;
}
}
base.ptr = mmap(NULL, max_limit, PROT_READ | PROT_WRITE, MAP_PRIVATE, dev_zero, 0);
#endif
if (base.ptr == MAP_FAILED) {
- SLJIT_FREE(stack);
+ SLJIT_FREE(stack, allocator_data);
return NULL;
}
stack->base = base.uw;
@@ -275,14 +276,15 @@
#undef PAGE_ALIGN
-SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_free_stack(struct sljit_stack* stack)
+SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_free_stack(struct sljit_stack* stack, void *allocator_data)
{
+ SLJIT_UNUSED_ARG(allocator_data);
#ifdef _WIN32
VirtualFree((void*)stack->base, 0, MEM_RELEASE);
#else
munmap((void*)stack->base, stack->max_limit - stack->base);
#endif
- SLJIT_FREE(stack);
+ SLJIT_FREE(stack, allocator_data);
}
SLJIT_API_FUNC_ATTRIBUTE sljit_sw SLJIT_CALL sljit_stack_resize(struct sljit_stack* stack, sljit_uw new_limit)
diff --git a/dist/test-driver b/dist/test-driver
index d306056..8e575b0 100755
--- a/dist/test-driver
+++ b/dist/test-driver
@@ -3,7 +3,7 @@
scriptversion=2013-07-13.22; # UTC
-# Copyright (C) 2011-2013 Free Software Foundation, Inc.
+# Copyright (C) 2011-2014 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -106,11 +106,14 @@
# Test script is run here.
"$@" >$log_file 2>&1
estatus=$?
+
if test $enable_hard_errors = no && test $estatus -eq 99; then
- estatus=1
+ tweaked_estatus=1
+else
+ tweaked_estatus=$estatus
fi
-case $estatus:$expect_failure in
+case $tweaked_estatus:$expect_failure in
0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
0:*) col=$grn res=PASS recheck=no gcopy=no;;
77:*) col=$blu res=SKIP recheck=no gcopy=yes;;
@@ -119,6 +122,12 @@
*:*) col=$red res=FAIL recheck=yes gcopy=yes;;
esac
+# Report the test outcome and exit status in the logs, so that one can
+# know whether the test passed or failed simply by looking at the '.log'
+# file, without the need of also peaking into the corresponding '.trs'
+# file (automake bug#11814).
+echo "$res $test_name (exit status: $estatus)" >>$log_file
+
# Report outcome to console.
echo "${col}${res}${std}: $test_name"
diff --git a/dist/testdata/grepinput8 b/dist/testdata/grepinput8
index 7163aa6..c4b8c44 100644
--- a/dist/testdata/grepinput8
+++ b/dist/testdata/grepinput8
Binary files differ
diff --git a/dist/testdata/grepoutput b/dist/testdata/grepoutput
index 9bf9d9d..4d61752 100644
--- a/dist/testdata/grepoutput
+++ b/dist/testdata/grepoutput
Binary files differ
diff --git a/dist/testdata/grepoutput8 b/dist/testdata/grepoutput8
index 385266b..91493bd 100644
--- a/dist/testdata/grepoutput8
+++ b/dist/testdata/grepoutput8
Binary files differ
diff --git a/dist/testdata/grepoutputN b/dist/testdata/grepoutputN
index 6760314..1f9f880 100644
--- a/dist/testdata/grepoutputN
+++ b/dist/testdata/grepoutputN
Binary files differ
diff --git a/dist/testdata/greppatN4 b/dist/testdata/greppatN4
index 7112d84..ea1bfc7 100644
--- a/dist/testdata/greppatN4
+++ b/dist/testdata/greppatN4
@@ -1,2 +1,2 @@
-xxx
+xxx
jkl
\ No newline at end of file
diff --git a/dist/testdata/testinput1 b/dist/testdata/testinput1
index 123e3d3..73c2f4d 100644
--- a/dist/testdata/testinput1
+++ b/dist/testdata/testinput1
@@ -5720,4 +5720,14 @@
/[\Q]a\E]+/
aa]]
+/(?:((abcd))|(((?:(?:(?:(?:abc|(?:abcdef))))b)abcdefghi)abc)|((*ACCEPT)))/
+ 1234abcd
+
+/(\2)(\1)/
+
+"Z*(|d*){216}"
+
+"(?1)(?#?'){8}(a)"
+ baaaaaaaaac
+
/-- End of testinput1 --/
diff --git a/dist/testdata/testinput11 b/dist/testdata/testinput11
index 7e8e542..65a4b03 100644
--- a/dist/testdata/testinput11
+++ b/dist/testdata/testinput11
@@ -134,4 +134,6 @@
/(((a\2)|(a*)\g<-1>))*a?/B
+/((?+1)(\1))/B
+
/-- End of testinput11 --/
diff --git a/dist/testdata/testinput12 b/dist/testdata/testinput12
index 5d727af..d68551f 100644
--- a/dist/testdata/testinput12
+++ b/dist/testdata/testinput12
@@ -87,4 +87,12 @@
/^12345678abcd/mS++
12345678abcd
+/-- Test pattern compilation --/
+
+/(?:a|b|c|d|e)(?R)/S++
+
+/(?:a|b|c|d|e)(?R)(?R)/S++
+
+/(a(?:a|b|c|d|e)b){8,16}/S++
+
/-- End of testinput12 --/
diff --git a/dist/testdata/testinput2 b/dist/testdata/testinput2
index c6816bf..58fe53b 100644
--- a/dist/testdata/testinput2
+++ b/dist/testdata/testinput2
@@ -1380,6 +1380,8 @@
1X
123456\P
+//KF>/dev/null
+
/abc/IS>testsavedregex
<testsavedregex
abc
@@ -4078,4 +4080,76 @@
/\x{whatever}/
+"((?=(?(?=(?(?=(?(?=()))))))))"
+ a
+
+"(?(?=)==)(((((((((?=)))))))))"
+ a
+
+/^(?:(a)|b)(?(1)A|B)/I
+ aA123\O3
+ aA123\O6
+
+'^(?:(?<AA>a)|b)(?(<AA>)A|B)'
+ aA123\O3
+ aA123\O6
+
+'^(?<AA>)(?:(?<AA>a)|b)(?(<AA>)A|B)'J
+ aA123\O3
+ aA123\O6
+
+'^(?:(?<AA>X)|)(?:(?<AA>a)|b)\k{AA}'J
+ aa123\O3
+ aa123\O6
+
+/(?<N111>(?J)(?<N111>1(111111)11|)1|1|)(?(<N111>)1)/
+
+/(?(?=0)?)+/
+
+/(?(?=0)(?=00)?00765)/
+ 00765
+
+/(?(?=0)(?=00)?00765|(?!3).56)/
+ 00765
+ 456
+ ** Failers
+ 356
+
+'^(a)*+(\w)'
+ g
+ g\O3
+
+'^(?:a)*+(\w)'
+ g
+ g\O3
+
+//C
+ \O\C+
+
+"((?2){0,1999}())?"
+
+/((?+1)(\1))/BZ
+
+/(?(?!)a|b)/
+ bbb
+ aaa
+
+"((?2)+)((?1))"
+
+"(?(?<E>.*!.*)?)"
+
+"X((?2)()*+){2}+"BZ
+
+"X((?2)()*+){2}"BZ
+
+"(?<=((?2))((?1)))"
+
+/(?<=\Ka)/g+
+ aaaaa
+
+/(?<=\Ka)/G+
+ aaaaa
+
+/((?2){73}(?2))((?1))/
+
/-- End of testinput2 --/
diff --git a/dist/testdata/testinput4 b/dist/testdata/testinput4
index 0110267..8bdbdac 100644
--- a/dist/testdata/testinput4
+++ b/dist/testdata/testinput4
@@ -722,4 +722,9 @@
/^#[^\x{ffff}]#[^\x{ffff}]#[^\x{ffff}]#/8
#\x{10000}#\x{100}#\x{10ffff}#
+"[\S\V\H]"8
+
+/\C(\W?ſ)'?{{/8
+ \\C(\\W?ſ)'?{{
+
/-- End of testinput4 --/
diff --git a/dist/testdata/testinput5 b/dist/testdata/testinput5
index e36b09d..28561a9 100644
--- a/dist/testdata/testinput5
+++ b/dist/testdata/testinput5
Binary files differ
diff --git a/dist/testdata/testinput6 b/dist/testdata/testinput6
index 82c3ed5..02cef0d 100644
--- a/dist/testdata/testinput6
+++ b/dist/testdata/testinput6
@@ -1496,4 +1496,10 @@
/^s?c/mi8
scat
+/[A-`]/i8
+ abcdefghijklmno
+
+/\C\X*QT/8
+ Ӆ\x0aT
+
/-- End of testinput6 --/
diff --git a/dist/testdata/testinput8 b/dist/testdata/testinput8
index 06334cd..931dd71 100644
--- a/dist/testdata/testinput8
+++ b/dist/testdata/testinput8
@@ -4837,4 +4837,8 @@
'\A(?:[^\"]++|\"(?:[^\"]++|\"\")*+\")++'
NON QUOTED \"QUOT\"\"ED\" AFTER \"NOT MATCHED
+/(?(?!)a|b)/
+ bbb
+ aaa
+
/-- End of testinput8 --/
diff --git a/dist/testdata/testoutput1 b/dist/testdata/testoutput1
index 5e71900..0a53fd0 100644
--- a/dist/testdata/testoutput1
+++ b/dist/testdata/testoutput1
@@ -9411,4 +9411,22 @@
aa]]
0: aa]]
+/(?:((abcd))|(((?:(?:(?:(?:abc|(?:abcdef))))b)abcdefghi)abc)|((*ACCEPT)))/
+ 1234abcd
+ 0:
+ 1: <unset>
+ 2: <unset>
+ 3: <unset>
+ 4: <unset>
+ 5:
+
+/(\2)(\1)/
+
+"Z*(|d*){216}"
+
+"(?1)(?#?'){8}(a)"
+ baaaaaaaaac
+ 0: aaaaaaaaa
+ 1: a
+
/-- End of testinput1 --/
diff --git a/dist/testdata/testoutput11-16 b/dist/testdata/testoutput11-16
index a1db3f3..422f2ad 100644
--- a/dist/testdata/testoutput11-16
+++ b/dist/testdata/testoutput11-16
@@ -231,7 +231,7 @@
------------------------------------------------------------------
/(?P<a>a)...(?P=a)bbb(?P>a)d/BM
-Memory allocation (code space): 57
+Memory allocation (code space): 61
------------------------------------------------------------------
0 24 Bra
2 5 CBra 1
@@ -733,4 +733,19 @@
41 End
------------------------------------------------------------------
+/((?+1)(\1))/B
+------------------------------------------------------------------
+ 0 20 Bra
+ 2 16 Once
+ 4 12 CBra 1
+ 7 9 Recurse
+ 9 5 CBra 2
+ 12 \1
+ 14 5 Ket
+ 16 12 Ket
+ 18 16 Ket
+ 20 20 Ket
+ 22 End
+------------------------------------------------------------------
+
/-- End of testinput11 --/
diff --git a/dist/testdata/testoutput11-32 b/dist/testdata/testoutput11-32
index 7b7b030..d953ec8 100644
--- a/dist/testdata/testoutput11-32
+++ b/dist/testdata/testoutput11-32
@@ -231,7 +231,7 @@
------------------------------------------------------------------
/(?P<a>a)...(?P=a)bbb(?P>a)d/BM
-Memory allocation (code space): 117
+Memory allocation (code space): 125
------------------------------------------------------------------
0 24 Bra
2 5 CBra 1
@@ -733,4 +733,19 @@
41 End
------------------------------------------------------------------
+/((?+1)(\1))/B
+------------------------------------------------------------------
+ 0 20 Bra
+ 2 16 Once
+ 4 12 CBra 1
+ 7 9 Recurse
+ 9 5 CBra 2
+ 12 \1
+ 14 5 Ket
+ 16 12 Ket
+ 18 16 Ket
+ 20 20 Ket
+ 22 End
+------------------------------------------------------------------
+
/-- End of testinput11 --/
diff --git a/dist/testdata/testoutput11-8 b/dist/testdata/testoutput11-8
index f5ec652..6ec18ec 100644
--- a/dist/testdata/testoutput11-8
+++ b/dist/testdata/testoutput11-8
@@ -231,7 +231,7 @@
------------------------------------------------------------------
/(?P<a>a)...(?P=a)bbb(?P>a)d/BM
-Memory allocation (code space): 34
+Memory allocation (code space): 38
------------------------------------------------------------------
0 30 Bra
3 7 CBra 1
@@ -733,4 +733,19 @@
60 End
------------------------------------------------------------------
+/((?+1)(\1))/B
+------------------------------------------------------------------
+ 0 31 Bra
+ 3 25 Once
+ 6 19 CBra 1
+ 11 14 Recurse
+ 14 8 CBra 2
+ 19 \1
+ 22 8 Ket
+ 25 19 Ket
+ 28 25 Ket
+ 31 31 Ket
+ 34 End
+------------------------------------------------------------------
+
/-- End of testinput11 --/
diff --git a/dist/testdata/testoutput12 b/dist/testdata/testoutput12
index 67ad2c8..7a1cf69 100644
--- a/dist/testdata/testoutput12
+++ b/dist/testdata/testoutput12
@@ -176,4 +176,12 @@
12345678abcd
0: 12345678abcd (JIT)
+/-- Test pattern compilation --/
+
+/(?:a|b|c|d|e)(?R)/S++
+
+/(?:a|b|c|d|e)(?R)(?R)/S++
+
+/(a(?:a|b|c|d|e)b){8,16}/S++
+
/-- End of testinput12 --/
diff --git a/dist/testdata/testoutput2 b/dist/testdata/testoutput2
index 1e87026..b718df0 100644
--- a/dist/testdata/testoutput2
+++ b/dist/testdata/testoutput2
@@ -561,7 +561,7 @@
Failed: reference to non-existent subpattern at offset 7
/(?(?<ab))/
-Failed: syntax error in subpattern name (missing terminator) at offset 7
+Failed: assertion expected after (?( at offset 3
/((?s)blah)\s+\1/I
Capturing subpattern count = 1
@@ -1566,30 +1566,35 @@
/a(?(1)b)(.)/I
Capturing subpattern count = 1
+Max back reference = 1
No options
First char = 'a'
No need char
/a(?(1)bag|big)(.)/I
Capturing subpattern count = 1
+Max back reference = 1
No options
First char = 'a'
Need char = 'g'
/a(?(1)bag|big)*(.)/I
Capturing subpattern count = 1
+Max back reference = 1
No options
First char = 'a'
No need char
/a(?(1)bag|big)+(.)/I
Capturing subpattern count = 1
+Max back reference = 1
No options
First char = 'a'
Need char = 'g'
/a(?(1)b..|b..)(.)/I
Capturing subpattern count = 1
+Max back reference = 1
No options
First char = 'a'
Need char = 'b'
@@ -3379,24 +3384,28 @@
/(?(1)ab|ac)(.)/I
Capturing subpattern count = 1
+Max back reference = 1
No options
First char = 'a'
No need char
/(?(1)abz|acz)(.)/I
Capturing subpattern count = 1
+Max back reference = 1
No options
First char = 'a'
Need char = 'z'
/(?(1)abz)(.)/I
Capturing subpattern count = 1
+Max back reference = 1
No options
No first char
No need char
/(?(1)abz)(1)23/I
Capturing subpattern count = 1
+Max back reference = 1
No options
No first char
Need char = '3'
@@ -5605,6 +5614,10 @@
123456\P
No match
+//KF>/dev/null
+Compiled pattern written to /dev/null
+Study data written to /dev/null
+
/abc/IS>testsavedregex
Capturing subpattern count = 0
No options
@@ -6336,6 +6349,7 @@
/^(?P<A>a)?(?(A)a|b)/I
Capturing subpattern count = 1
+Max back reference = 1
Named capturing subpatterns:
A 1
Options: anchored
@@ -6353,6 +6367,7 @@
/(?:(?(ZZ)a|b)(?P<ZZ>X))+/I
Capturing subpattern count = 1
+Max back reference = 1
Named capturing subpatterns:
ZZ 1
No options
@@ -6370,6 +6385,7 @@
/(?:(?(ZZ)a|b)(?(ZZ)a|b)(?P<ZZ>X))+/I
Capturing subpattern count = 1
+Max back reference = 1
Named capturing subpatterns:
ZZ 1
No options
@@ -6381,6 +6397,7 @@
/(?:(?(ZZ)a|\(b\))\\(?P<ZZ>X))+/I
Capturing subpattern count = 1
+Max back reference = 1
Named capturing subpatterns:
ZZ 1
No options
@@ -10226,6 +10243,7 @@
(?(1)|.) # check that there was an empty component
/xiIS
Capturing subpattern count = 1
+Max back reference = 1
Options: anchored caseless extended
No first char
Need char = ':'
@@ -10255,6 +10273,7 @@
b(?<quote> (?<apostrophe>')|(?<realquote>")) )
(?('quote')[a-z]+|[0-9]+)/JIx
Capturing subpattern count = 6
+Max back reference = 1
Named capturing subpatterns:
apostrophe 2
apostrophe 5
@@ -10317,6 +10336,7 @@
End
------------------------------------------------------------------
Capturing subpattern count = 4
+Max back reference = 4
Named capturing subpatterns:
D 4
D 1
@@ -10364,6 +10384,7 @@
End
------------------------------------------------------------------
Capturing subpattern count = 4
+Max back reference = 1
Named capturing subpatterns:
A 1
A 4
@@ -10486,6 +10507,7 @@
/()i(?(1)a)/SI
Capturing subpattern count = 1
+Max back reference = 1
No options
No first char
Need char = 'i'
@@ -14206,4 +14228,199 @@
/\x{whatever}/
Failed: non-hex character in \x{} (closing brace missing?) at offset 3
+"((?=(?(?=(?(?=(?(?=()))))))))"
+ a
+ 0:
+ 1:
+ 2:
+
+"(?(?=)==)(((((((((?=)))))))))"
+ a
+No match
+
+/^(?:(a)|b)(?(1)A|B)/I
+Capturing subpattern count = 1
+Max back reference = 1
+Options: anchored
+No first char
+No need char
+ aA123\O3
+Matched, but too many substrings
+ 0: aA
+ aA123\O6
+ 0: aA
+ 1: a
+
+'^(?:(?<AA>a)|b)(?(<AA>)A|B)'
+ aA123\O3
+Matched, but too many substrings
+ 0: aA
+ aA123\O6
+ 0: aA
+ 1: a
+
+'^(?<AA>)(?:(?<AA>a)|b)(?(<AA>)A|B)'J
+ aA123\O3
+Matched, but too many substrings
+ 0: aA
+ aA123\O6
+Matched, but too many substrings
+ 0: aA
+ 1:
+
+'^(?:(?<AA>X)|)(?:(?<AA>a)|b)\k{AA}'J
+ aa123\O3
+Matched, but too many substrings
+ 0: aa
+ aa123\O6
+Matched, but too many substrings
+ 0: aa
+ 1: <unset>
+
+/(?<N111>(?J)(?<N111>1(111111)11|)1|1|)(?(<N111>)1)/
+
+/(?(?=0)?)+/
+Failed: nothing to repeat at offset 7
+
+/(?(?=0)(?=00)?00765)/
+ 00765
+ 0: 00765
+
+/(?(?=0)(?=00)?00765|(?!3).56)/
+ 00765
+ 0: 00765
+ 456
+ 0: 456
+ ** Failers
+No match
+ 356
+No match
+
+'^(a)*+(\w)'
+ g
+ 0: g
+ 1: <unset>
+ 2: g
+ g\O3
+Matched, but too many substrings
+ 0: g
+
+'^(?:a)*+(\w)'
+ g
+ 0: g
+ 1: g
+ g\O3
+Matched, but too many substrings
+ 0: g
+
+//C
+ \O\C+
+Callout 255: last capture = -1
+--->
+ +0 ^
+Matched, but too many substrings
+
+"((?2){0,1999}())?"
+
+/((?+1)(\1))/BZ
+------------------------------------------------------------------
+ Bra
+ Once
+ CBra 1
+ Recurse
+ CBra 2
+ \1
+ Ket
+ Ket
+ Ket
+ Ket
+ End
+------------------------------------------------------------------
+
+/(?(?!)a|b)/
+ bbb
+ 0: b
+ aaa
+No match
+
+"((?2)+)((?1))"
+
+"(?(?<E>.*!.*)?)"
+Failed: assertion expected after (?( at offset 3
+
+"X((?2)()*+){2}+"BZ
+------------------------------------------------------------------
+ Bra
+ X
+ Once
+ CBra 1
+ Recurse
+ Braposzero
+ SCBraPos 2
+ KetRpos
+ Ket
+ CBra 1
+ Recurse
+ Braposzero
+ SCBraPos 2
+ KetRpos
+ Ket
+ Ket
+ Ket
+ End
+------------------------------------------------------------------
+
+"X((?2)()*+){2}"BZ
+------------------------------------------------------------------
+ Bra
+ X
+ CBra 1
+ Recurse
+ Braposzero
+ SCBraPos 2
+ KetRpos
+ Ket
+ CBra 1
+ Recurse
+ Braposzero
+ SCBraPos 2
+ KetRpos
+ Ket
+ Ket
+ End
+------------------------------------------------------------------
+
+"(?<=((?2))((?1)))"
+Failed: lookbehind assertion is not fixed length at offset 17
+
+/(?<=\Ka)/g+
+ aaaaa
+ 0: a
+ 0+ aaaa
+ 0: a
+ 0+ aaaa
+ 0: a
+ 0+ aaa
+ 0: a
+ 0+ aa
+ 0: a
+ 0+ a
+ 0: a
+ 0+
+
+/(?<=\Ka)/G+
+ aaaaa
+ 0: a
+ 0+ aaaa
+ 0: a
+ 0+ aaa
+ 0: a
+ 0+ aa
+ 0: a
+ 0+ a
+ 0: a
+ 0+
+
+/((?2){73}(?2))((?1))/
+
/-- End of testinput2 --/
diff --git a/dist/testdata/testoutput4 b/dist/testdata/testoutput4
index dcf13b0..d43c123 100644
--- a/dist/testdata/testoutput4
+++ b/dist/testdata/testoutput4
@@ -1271,4 +1271,10 @@
#\x{10000}#\x{100}#\x{10ffff}#
0: #\x{10000}#\x{100}#\x{10ffff}#
+"[\S\V\H]"8
+
+/\C(\W?ſ)'?{{/8
+ \\C(\\W?ſ)'?{{
+No match
+
/-- End of testinput4 --/
diff --git a/dist/testdata/testoutput5 b/dist/testdata/testoutput5
index 5c098e6..bab989c 100644
--- a/dist/testdata/testoutput5
+++ b/dist/testdata/testoutput5
Binary files differ
diff --git a/dist/testdata/testoutput6 b/dist/testdata/testoutput6
index a990ba1..3f035b8 100644
--- a/dist/testdata/testoutput6
+++ b/dist/testdata/testoutput6
@@ -2461,4 +2461,12 @@
scat
0: sc
+/[A-`]/i8
+ abcdefghijklmno
+ 0: a
+
+/\C\X*QT/8
+ Ӆ\x0aT
+No match
+
/-- End of testinput6 --/
diff --git a/dist/testdata/testoutput8 b/dist/testdata/testoutput8
index 95c4e4d..e4fa497 100644
--- a/dist/testdata/testoutput8
+++ b/dist/testdata/testoutput8
@@ -7785,4 +7785,10 @@
NON QUOTED \"QUOT\"\"ED\" AFTER \"NOT MATCHED
0: NON QUOTED "QUOT""ED" AFTER
+/(?(?!)a|b)/
+ bbb
+ 0: b
+ aaa
+No match
+
/-- End of testinput8 --/
