diff --git a/dist/AUTHORS b/dist/AUTHORS
index 5eee1af..d33723f 100644
--- a/dist/AUTHORS
+++ b/dist/AUTHORS
@@ -8,7 +8,7 @@
 University of Cambridge Computing Service,
 Cambridge, England.
 
-Copyright (c) 1997-2014 University of Cambridge
+Copyright (c) 1997-2015 University of Cambridge
 All rights reserved
 
 
@@ -19,7 +19,7 @@
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2010-2014 Zoltan Herczeg
+Copyright(c) 2010-2015 Zoltan Herczeg
 All rights reserved.
 
 
@@ -30,7 +30,7 @@
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2009-2014 Zoltan Herczeg
+Copyright(c) 2009-2015 Zoltan Herczeg
 All rights reserved.
 
 
diff --git a/dist/ChangeLog b/dist/ChangeLog
index 8abdfb5..359b412 100644
--- a/dist/ChangeLog
+++ b/dist/ChangeLog
@@ -1,6 +1,173 @@
 ChangeLog for PCRE
 ------------------
 
+Version 8.37 28-April-2015
+--------------------------
+
+1.  When an (*ACCEPT) is triggered inside capturing parentheses, it arranges
+    for those parentheses to be closed with whatever has been captured so far.
+    However, it was failing to mark any other groups between the hightest
+    capture so far and the currrent group as "unset". Thus, the ovector for
+    those groups contained whatever was previously there. An example is the
+    pattern /(x)|((*ACCEPT))/ when matched against "abcd".
+
+2.  If an assertion condition was quantified with a minimum of zero (an odd
+    thing to do, but it happened), SIGSEGV or other misbehaviour could occur.
+
+3.  If a pattern in pcretest input had the P (POSIX) modifier followed by an
+    unrecognized modifier, a crash could occur.
+
+4.  An attempt to do global matching in pcretest with a zero-length ovector
+    caused a crash.
+
+5.  Fixed a memory leak during matching that could occur for a subpattern
+    subroutine call (recursive or otherwise) if the number of captured groups
+    that had to be saved was greater than ten.
+
+6.  Catch a bad opcode during auto-possessification after compiling a bad UTF
+    string with NO_UTF_CHECK. This is a tidyup, not a bug fix, as passing bad
+    UTF with NO_UTF_CHECK is documented as having an undefined outcome.
+
+7.  A UTF pattern containing a "not" match of a non-ASCII character and a
+    subroutine reference could loop at compile time. Example: /[^\xff]((?1))/.
+
+8. When a pattern is compiled, it remembers the highest back reference so that
+   when matching, if the ovector is too small, extra memory can be obtained to
+   use instead. A conditional subpattern whose condition is a check on a
+   capture having happened, such as, for example in the pattern
+   /^(?:(a)|b)(?(1)A|B)/, is another kind of back reference, but it was not
+   setting the highest backreference number. This mattered only if pcre_exec()
+   was called with an ovector that was too small to hold the capture, and there
+   was no other kind of back reference (a situation which is probably quite
+   rare). The effect of the bug was that the condition was always treated as
+   FALSE when the capture could not be consulted, leading to a incorrect
+   behaviour by pcre_exec(). This bug has been fixed.
+
+9. A reference to a duplicated named group (either a back reference or a test
+   for being set in a conditional) that occurred in a part of the pattern where
+   PCRE_DUPNAMES was not set caused the amount of memory needed for the pattern
+   to be incorrectly calculated, leading to overwriting.
+
+10. A mutually recursive set of back references such as (\2)(\1) caused a
+    segfault at study time (while trying to find the minimum matching length).
+    The infinite loop is now broken (with the minimum length unset, that is,
+    zero).
+
+11. If an assertion that was used as a condition was quantified with a minimum
+    of zero, matching went wrong. In particular, if the whole group had
+    unlimited repetition and could match an empty string, a segfault was
+    likely. The pattern (?(?=0)?)+ is an example that caused this. Perl allows
+    assertions to be quantified, but not if they are being used as conditions,
+    so the above pattern is faulted by Perl. PCRE has now been changed so that
+    it also rejects such patterns.
+
+12. A possessive capturing group such as (a)*+ with a minimum repeat of zero
+    failed to allow the zero-repeat case if pcre2_exec() was called with an
+    ovector too small to capture the group.
+
+13. Fixed two bugs in pcretest that were discovered by fuzzing and reported by
+    Red Hat Product Security:
+
+    (a) A crash if /K and /F were both set with the option to save the compiled
+    pattern.
+
+    (b) Another crash if the option to print captured substrings in a callout
+    was combined with setting a null ovector, for example \O\C+ as a subject
+    string.
+
+14. A pattern such as "((?2){0,1999}())?", which has a group containing a
+    forward reference repeated a large (but limited) number of times within a
+    repeated outer group that has a zero minimum quantifier, caused incorrect
+    code to be compiled, leading to the error "internal error:
+    previously-checked referenced subpattern not found" when an incorrect
+    memory address was read. This bug was reported as "heap overflow",
+    discovered by Kai Lu of Fortinet's FortiGuard Labs and given the CVE number
+    CVE-2015-2325.
+
+23. A pattern such as "((?+1)(\1))/" containing a forward reference subroutine
+    call within a group that also contained a recursive back reference caused
+    incorrect code to be compiled. This bug was reported as "heap overflow",
+    discovered by Kai Lu of Fortinet's FortiGuard Labs, and given the CVE
+    number CVE-2015-2326.
+
+24. Computing the size of the JIT read-only data in advance has been a source
+    of various issues, and new ones are still appear unfortunately. To fix
+    existing and future issues, size computation is eliminated from the code,
+    and replaced by on-demand memory allocation.
+
+25. A pattern such as /(?i)[A-`]/, where characters in the other case are
+    adjacent to the end of the range, and the range contained characters with
+    more than one other case, caused incorrect behaviour when compiled in UTF
+    mode. In that example, the range a-j was left out of the class.
+
+26. Fix JIT compilation of conditional blocks, which assertion
+    is converted to (*FAIL). E.g: /(?(?!))/.
+
+27. The pattern /(?(?!)^)/ caused references to random memory. This bug was
+    discovered by the LLVM fuzzer.
+
+28. The assertion (?!) is optimized to (*FAIL). This was not handled correctly
+    when this assertion was used as a condition, for example (?(?!)a|b). In
+    pcre2_match() it worked by luck; in pcre2_dfa_match() it gave an incorrect
+    error about an unsupported item.
+
+29. For some types of pattern, for example /Z*(|d*){216}/, the auto-
+    possessification code could take exponential time to complete. A recursion
+    depth limit of 1000 has been imposed to limit the resources used by this
+    optimization.
+
+30. A pattern such as /(*UTF)[\S\V\H]/, which contains a negated special class
+    such as \S in non-UCP mode, explicit wide characters (> 255) can be ignored
+    because \S ensures they are all in the class. The code for doing this was
+    interacting badly with the code for computing the amount of space needed to
+    compile the pattern, leading to a buffer overflow. This bug was discovered
+    by the LLVM fuzzer.
+
+31. A pattern such as /((?2)+)((?1))/ which has mutual recursion nested inside
+    other kinds of group caused stack overflow at compile time. This bug was
+    discovered by the LLVM fuzzer.
+
+32. A pattern such as /(?1)(?#?'){8}(a)/ which had a parenthesized comment
+    between a subroutine call and its quantifier was incorrectly compiled,
+    leading to buffer overflow or other errors. This bug was discovered by the
+    LLVM fuzzer.
+
+33. The illegal pattern /(?(?<E>.*!.*)?)/ was not being diagnosed as missing an
+    assertion after (?(. The code was failing to check the character after
+    (?(?< for the ! or = that would indicate a lookbehind assertion. This bug
+    was discovered by the LLVM fuzzer.
+
+34. A pattern such as /X((?2)()*+){2}+/ which has a possessive quantifier with
+    a fixed maximum following a group that contains a subroutine reference was
+    incorrectly compiled and could trigger buffer overflow. This bug was
+    discovered by the LLVM fuzzer.
+
+35. A mutual recursion within a lookbehind assertion such as (?<=((?2))((?1)))
+    caused a stack overflow instead of the diagnosis of a non-fixed length
+    lookbehind assertion. This bug was discovered by the LLVM fuzzer.
+
+36. The use of \K in a positive lookbehind assertion in a non-anchored pattern
+    (e.g. /(?<=\Ka)/) could make pcregrep loop.
+
+37. There was a similar problem to 36 in pcretest for global matches.
+
+38. If a greedy quantified \X was preceded by \C in UTF mode (e.g. \C\X*),
+    and a subsequent item in the pattern caused a non-match, backtracking over
+    the repeated \X did not stop, but carried on past the start of the subject,
+    causing reference to random memory and/or a segfault. There were also some
+    other cases where backtracking after \C could crash. This set of bugs was
+    discovered by the LLVM fuzzer.
+
+39. The function for finding the minimum length of a matching string could take
+    a very long time if mutual recursion was present many times in a pattern,
+    for example, /((?2){73}(?2))((?1))/. A better mutual recursion detection
+    method has been implemented. This infelicity was discovered by the LLVM
+    fuzzer.
+
+40. Static linking against the PCRE library using the pkg-config module was
+    failing on missing pthread symbols.
+
+
 Version 8.36 26-September-2014
 ------------------------------
 
diff --git a/dist/LICENCE b/dist/LICENCE
index 602e4ae..9f6f98e 100644
--- a/dist/LICENCE
+++ b/dist/LICENCE
@@ -6,7 +6,8 @@
 
 Release 8 of PCRE is distributed under the terms of the "BSD" licence, as
 specified below. The documentation for PCRE, supplied in the "doc"
-directory, is distributed under the same terms as the software itself.
+directory, is distributed under the same terms as the software itself. The data
+in the testdata directory is not copyrighted and is in the public domain.
 
 The basic library functions are written in C and are freestanding. Also
 included in the distribution is a set of C++ wrapper functions, and a
@@ -24,7 +25,7 @@
 University of Cambridge Computing Service,
 Cambridge, England.
 
-Copyright (c) 1997-2014 University of Cambridge
+Copyright (c) 1997-2015 University of Cambridge
 All rights reserved.
 
 
@@ -35,7 +36,7 @@
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2010-2014 Zoltan Herczeg
+Copyright(c) 2010-2015 Zoltan Herczeg
 All rights reserved.
 
 
@@ -46,7 +47,7 @@
 Email local part: hzmester
 Emain domain:     freemail.hu
 
-Copyright(c) 2009-2014 Zoltan Herczeg
+Copyright(c) 2009-2015 Zoltan Herczeg
 All rights reserved.
 
 
diff --git a/dist/Makefile.in b/dist/Makefile.in
index b1a36cc..c2a4530 100644
--- a/dist/Makefile.in
+++ b/dist/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -19,7 +19,17 @@
 
 
 VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
 am__make_running_with_option = \
   case $${target_option-} in \
       ?) ;; \
@@ -151,18 +161,6 @@
 @WITH_PCRE32_TRUE@am__append_44 = libpcre32.pc
 @WITH_PCRE_CPP_TRUE@am__append_45 = libpcrecpp.pc
 subdir = .
-DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
-	$(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(top_srcdir)/configure $(am__configure_deps) \
-	$(srcdir)/config.h.in $(srcdir)/libpcre.pc.in \
-	$(srcdir)/libpcre16.pc.in $(srcdir)/libpcre32.pc.in \
-	$(srcdir)/libpcreposix.pc.in $(srcdir)/libpcrecpp.pc.in \
-	$(srcdir)/pcre-config.in $(srcdir)/pcre.h.in \
-	$(srcdir)/pcre_stringpiece.h.in $(srcdir)/pcrecpparg.h.in \
-	$(am__dist_noinst_SCRIPTS_DIST) depcomp $(dist_man_MANS) \
-	$(dist_doc_DATA) $(dist_html_DATA) $(dist_noinst_DATA) \
-	$(am__include_HEADERS_DIST) test-driver COPYING ar-lib compile \
-	config.guess config.sub install-sh missing ltmain.sh
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_pthread.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
@@ -171,6 +169,10 @@
 	$(top_srcdir)/m4/pcre_visibility.m4 $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+	$(am__configure_deps) $(am__dist_noinst_SCRIPTS_DIST) \
+	$(dist_doc_DATA) $(dist_html_DATA) $(dist_noinst_DATA) \
+	$(am__include_HEADERS_DIST) $(am__DIST_COMMON)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
@@ -722,6 +724,15 @@
 TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
 TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
 	$(TEST_LOG_FLAGS)
+am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \
+	$(srcdir)/config.h.in $(srcdir)/libpcre.pc.in \
+	$(srcdir)/libpcre16.pc.in $(srcdir)/libpcre32.pc.in \
+	$(srcdir)/libpcrecpp.pc.in $(srcdir)/libpcreposix.pc.in \
+	$(srcdir)/pcre-config.in $(srcdir)/pcre.h.in \
+	$(srcdir)/pcre_stringpiece.h.in $(srcdir)/pcrecpparg.h.in \
+	AUTHORS COPYING ChangeLog INSTALL NEWS README ar-lib compile \
+	config.guess config.sub depcomp install-sh ltmain.sh missing \
+	test-driver
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
@@ -798,6 +809,7 @@
 LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
@@ -1326,7 +1338,6 @@
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -2613,7 +2624,7 @@
 	if test -n "$$am__remaking_logs"; then \
 	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
 	       "recursion detected" >&2; \
-	else \
+	elif test -n "$$redo_logs"; then \
 	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
 	fi; \
 	if $(am__make_dryrun); then :; else \
@@ -2836,15 +2847,15 @@
 	$(am__post_remove_distdir)
 
 dist-tarZ: distdir
-	@echo WARNING: "Support for shar distribution archives is" \
-	               "deprecated." >&2
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
 	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__post_remove_distdir)
 
 dist-shar: distdir
-	@echo WARNING: "Support for distribution archives compressed with" \
-		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
 	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
 	$(am__post_remove_distdir)
@@ -2879,17 +2890,17 @@
 	esac
 	chmod -R a-w $(distdir)
 	chmod u+w $(distdir)
-	mkdir $(distdir)/_build $(distdir)/_inst
+	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
 	chmod a-w $(distdir)
 	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure \
+	  && $(am__cd) $(distdir)/_build/sub \
+	  && ../../configure \
 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	    --srcdir=.. --prefix="$$dc_install_base" \
+	    --srcdir=../.. --prefix="$$dc_install_base" \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
@@ -3110,6 +3121,8 @@
 	uninstall-man3 uninstall-nodist_includeHEADERS \
 	uninstall-pkgconfigDATA
 
+.PRECIOUS: Makefile
+
 
 # The only difference between pcre.h.in and pcre.h is the setting of the PCRE
 # version number. Therefore, we can create the generic version just by copying.
diff --git a/dist/NEWS b/dist/NEWS
index 5b8c60c..064bf27 100644
--- a/dist/NEWS
+++ b/dist/NEWS
@@ -1,6 +1,14 @@
 News about PCRE releases
 ------------------------
 
+Release 8.37 28-April-2015
+--------------------------
+
+This is bug-fix release. Note that this library (now called PCRE1) is now being
+maintained for bug fixes only. New projects are advised to use the new PCRE2
+libraries.
+
+
 Release 8.36 26-September-2014
 ------------------------------
 
diff --git a/dist/NON-AUTOTOOLS-BUILD b/dist/NON-AUTOTOOLS-BUILD
index cddf3e0..1c3da84 100644
--- a/dist/NON-AUTOTOOLS-BUILD
+++ b/dist/NON-AUTOTOOLS-BUILD
@@ -1,6 +1,14 @@
 Building PCRE without using autotools
 -------------------------------------
 
+NOTE: This document relates to PCRE releases that use the original API, with
+library names libpcre, libpcre16, and libpcre32. January 2015 saw the first
+release of a new API, known as PCRE2, with release numbers starting at 10.00
+and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old libraries
+(now called PCRE1) are still being maintained for bug fixes, but there will be
+no new development. New projects are advised to use the new PCRE2 libraries.
+
+
 This document contains the following sections:
 
   General
@@ -761,4 +769,4 @@
   http://www.vsoft-software.com/downloads.html
 
 ==========================
-Last Updated: 14 May 2013
+Last Updated: 10 February 2015
diff --git a/dist/README b/dist/README
index e30bd0f..4887ebf 100644
--- a/dist/README
+++ b/dist/README
@@ -1,7 +1,16 @@
 README file for PCRE (Perl-compatible regular expression library)
 -----------------------------------------------------------------
 
-The latest release of PCRE is always available in three alternative formats
+NOTE: This set of files relates to PCRE releases that use the original API,
+with library names libpcre, libpcre16, and libpcre32. January 2015 saw the
+first release of a new API, known as PCRE2, with release numbers starting at
+10.00 and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old
+libraries (now called PCRE1) are still being maintained for bug fixes, but
+there will be no new development. New projects are advised to use the new PCRE2
+libraries.
+
+
+The latest release of PCRE1 is always available in three alternative formats
 from:
 
   ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-xxx.tar.gz
@@ -990,4 +999,4 @@
 Philip Hazel
 Email local part: ph10
 Email domain: cam.ac.uk
-Last updated: 24 October 2014
+Last updated: 10 February 2015
diff --git a/dist/RunGrepTest b/dist/RunGrepTest
index f1b0348..62e2a9b 100755
--- a/dist/RunGrepTest
+++ b/dist/RunGrepTest
@@ -506,6 +506,11 @@
 (cd $srcdir; echo "a" | $valgrind $pcregrep -M "|a" ) >>testtrygrep 2>&1
 echo "RC=$?" >>testtrygrep
 
+echo "---------------------------- Test 107 -----------------------------" >>testtrygrep
+echo "a" >testtemp1grep
+echo "aaaaa" >>testtemp1grep
+(cd $srcdir; $valgrind $pcregrep  --line-offsets '(?<=\Ka)' $builddir/testtemp1grep) >>testtrygrep 2>&1
+echo "RC=$?" >>testtrygrep
 
 # Now compare the results.
 
diff --git a/dist/RunTest.bat b/dist/RunTest.bat
index 8f290f5..35d7f71 100644
--- a/dist/RunTest.bat
+++ b/dist/RunTest.bat
@@ -1,616 +1,616 @@
-@echo off
-@rem This file must use CRLF linebreaks to function properly
-@rem and requires both pcretest and pcregrep
-@rem  This file was originally contributed by Ralf Junker, and touched up by
-@rem  Daniel Richard G. Tests 10-12 added by Philip H.
-@rem  Philip H also changed test 3 to use "wintest" files.
-@rem
-@rem  Updated by Tom Fortmann to support explicit test numbers on the command line.
-@rem  Added argument validation and added error reporting.
-@rem
-@rem  MS Windows batch file to run pcretest on testfiles with the correct
-@rem  options.
-@rem
-@rem Sheri Pierce added logic to skip feature dependent tests
-@rem tests 4 5 9 15 and 18 require utf support
-@rem tests 6 7 10 16 and 19 require ucp support
-@rem 11 requires ucp and link size 2
-@rem 12 requires presence of jit support
-@rem 13 requires absence of jit support
-@rem Sheri P also added override tests for study and jit testing
-@rem Zoltan Herczeg added libpcre16 support
-@rem Zoltan Herczeg added libpcre32 support
-
-setlocal enabledelayedexpansion
-if [%srcdir%]==[] (
-if exist testdata\ set srcdir=.)
-if [%srcdir%]==[] (
-if exist ..\testdata\ set srcdir=..)
-if [%srcdir%]==[] (
-if exist ..\..\testdata\ set srcdir=..\..)
-if NOT exist %srcdir%\testdata\ (
-Error: echo distribution testdata folder not found!
-call :conferror
-exit /b 1
-goto :eof
-)
-
-if [%pcretest%]==[] set pcretest=.\pcretest.exe
-
-echo source dir is %srcdir%
-echo pcretest=%pcretest%
-
-if NOT exist %pcretest% (
-echo Error: %pcretest% not found!
-echo.
-call :conferror
-exit /b 1
-)
-
-%pcretest% -C linksize >NUL
-set link_size=%ERRORLEVEL%
-%pcretest% -C pcre8 >NUL
-set support8=%ERRORLEVEL%
-%pcretest% -C pcre16 >NUL
-set support16=%ERRORLEVEL%
-%pcretest% -C pcre32 >NUL
-set support32=%ERRORLEVEL%
-%pcretest% -C utf >NUL
-set utf=%ERRORLEVEL%
-%pcretest% -C ucp >NUL
-set ucp=%ERRORLEVEL%
-%pcretest% -C jit >NUL
-set jit=%ERRORLEVEL%
-
-if %support8% EQU 1 (
-if not exist testout8 md testout8
-if not exist testoutstudy8 md testoutstudy8
-if not exist testoutjit8 md testoutjit8
-)
-
-if %support16% EQU 1 (
-if not exist testout16 md testout16
-if not exist testoutstudy16 md testoutstudy16
-if not exist testoutjit16 md testoutjit16
-)
-
-if %support16% EQU 1 (
-if not exist testout32 md testout32
-if not exist testoutstudy32 md testoutstudy32
-if not exist testoutjit32 md testoutjit32
-)
-
-set do1=no
-set do2=no
-set do3=no
-set do4=no
-set do5=no
-set do6=no
-set do7=no
-set do8=no
-set do9=no
-set do10=no
-set do11=no
-set do12=no
-set do13=no
-set do14=no
-set do15=no
-set do16=no
-set do17=no
-set do18=no
-set do19=no
-set do20=no
-set do21=no
-set do22=no
-set do23=no
-set do24=no
-set do25=no
-set do26=no
-set all=yes
-
-for %%a in (%*) do (
-  set valid=no
-  for %%v in (1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26) do if %%v == %%a set valid=yes
-  if "!valid!" == "yes" (
-    set do%%a=yes
-    set all=no
-) else (
-    echo Invalid test number - %%a!
-        echo Usage %0 [ test_number ] ...
-        echo Where test_number is one or more optional test numbers 1 through 26, default is all tests.
-        exit /b 1
-)
-)
-set failed="no"
-
-if "%all%" == "yes" (
-  set do1=yes
-  set do2=yes
-  set do3=yes
-  set do4=yes
-  set do5=yes
-  set do6=yes
-  set do7=yes
-  set do8=yes
-  set do9=yes
-  set do10=yes
-  set do11=yes
-  set do12=yes
-  set do13=yes
-  set do14=yes
-  set do15=yes
-  set do16=yes
-  set do17=yes
-  set do18=yes
-  set do19=yes
-  set do20=yes
-  set do21=yes
-  set do22=yes
-  set do23=yes
-  set do24=yes
-  set do25=yes
-  set do26=yes
-)
-
-@echo RunTest.bat's pcretest output is written to newly created subfolders named
-@echo testout, testoutstudy and testoutjit.
-@echo.
-
-set mode=
-set bits=8
-
-:nextMode
-if "%mode%" == "" (
-  if %support8% EQU 0 goto modeSkip
-  echo.
-  echo ---- Testing 8-bit library ----
-  echo.
-)
-if "%mode%" == "-16" (
-  if %support16% EQU 0 goto modeSkip
-  echo.
-  echo ---- Testing 16-bit library ----
-  echo.
-)
-if "%mode%" == "-32" (
-  if %support32% EQU 0 goto modeSkip
-  echo.
-  echo ---- Testing 32-bit library ----
-  echo.
-)
-if "%do1%" == "yes" call :do1
-if "%do2%" == "yes" call :do2
-if "%do3%" == "yes" call :do3
-if "%do4%" == "yes" call :do4
-if "%do5%" == "yes" call :do5
-if "%do6%" == "yes" call :do6
-if "%do7%" == "yes" call :do7
-if "%do8%" == "yes" call :do8
-if "%do9%" == "yes" call :do9
-if "%do10%" == "yes" call :do10
-if "%do11%" == "yes" call :do11
-if "%do12%" == "yes" call :do12
-if "%do13%" == "yes" call :do13
-if "%do14%" == "yes" call :do14
-if "%do15%" == "yes" call :do15
-if "%do16%" == "yes" call :do16
-if "%do17%" == "yes" call :do17
-if "%do18%" == "yes" call :do18
-if "%do19%" == "yes" call :do19
-if "%do20%" == "yes" call :do20
-if "%do21%" == "yes" call :do21
-if "%do22%" == "yes" call :do22
-if "%do23%" == "yes" call :do23
-if "%do24%" == "yes" call :do24
-if "%do25%" == "yes" call :do25
-if "%do26%" == "yes" call :do26
-:modeSkip
-if "%mode%" == "" (
-  set mode=-16
-  set bits=16
-  goto nextMode
-)
-if "%mode%" == "-16" (
-  set mode=-32
-  set bits=32
-  goto nextMode
-)
-
-@rem If mode is -32, testing is finished
-if %failed% == "yes" (
-echo In above output, one or more of the various tests failed!
-exit /b 1
-)
-echo All OK
-goto :eof
-
-:runsub
-@rem Function to execute pcretest and compare the output
-@rem Arguments are as follows:
-@rem
-@rem       1 = test number
-@rem       2 = outputdir
-@rem       3 = test name use double quotes
-@rem   4 - 9 = pcretest options
-
-if [%1] == [] (
-  echo Missing test number argument!
-  exit /b 1
-)
-
-if [%2] == [] (
-  echo Missing outputdir!
-  exit /b 1
-)
-
-if [%3] == [] (
-  echo Missing test name argument!
-  exit /b 1
-)
-
-set testinput=testinput%1
-set testoutput=testoutput%1
-if exist %srcdir%\testdata\win%testinput% (
-  set testinput=wintestinput%1
-  set testoutput=wintestoutput%1
-)
-
-echo Test %1: %3
-%pcretest% %mode% %4 %5 %6 %7 %8 %9 %srcdir%\testdata\%testinput% >%2%bits%\%testoutput%
-if errorlevel 1 (
-  echo.          failed executing command-line:
-  echo.            %pcretest% %mode% %4 %5 %6 %7 %8 %9 %srcdir%\testdata\%testinput% ^>%2%bits%\%testoutput%
-  set failed="yes"
-  goto :eof
-)
-
-set type=
-if [%1]==[11] (
-  set type=-%bits%
-)
-if [%1]==[18] (
-  set type=-%bits%
-)
-if [%1]==[21] (
-  set type=-%bits%
-)
-if [%1]==[22] (
-  set type=-%bits%
-)
-
-fc /n %srcdir%\testdata\%testoutput%%type% %2%bits%\%testoutput% >NUL
-
-if errorlevel 1 (
-  echo.          failed comparison: fc /n %srcdir%\testdata\%testoutput% %2%bits%\%testoutput%
-  if [%1]==[2] (
-    echo.
-    echo ** Test 2 requires a lot of stack. PCRE can be configured to
-    echo ** use heap for recursion. Otherwise, to pass Test 2
-    echo ** you generally need to allocate 8 mb stack to PCRE.
-    echo ** See the 'pcrestack' page for a discussion of PCRE's
-    echo ** stack usage.
-    echo.
-)
-  if [%1]==[3] (
-    echo.
-    echo ** Test 3 failure usually means french locale is not
-    echo ** available on the system, rather than a bug or problem with PCRE.
-    echo.
-    goto :eof
-)
-
-  set failed="yes"
-  goto :eof
-)
-
-echo.          Passed.
-goto :eof
-
-:do1
-call :runsub 1 testout "Main functionality (Compatible with Perl >= 5.10)" -q
-call :runsub 1 testoutstudy "Test with Study Override" -q -s
-if %jit% EQU 1 call :runsub 1 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do2
-  call :runsub 2 testout "API, errors, internals, and non-Perl stuff" -q
-  call :runsub 2 testoutstudy "Test with Study Override" -q -s
-  if %jit% EQU 1 call :runsub 2 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do3
-  call :runsub 3 testout "Locale-specific features" -q
-  call :runsub 3 testoutstudy "Test with Study Override" -q -s
-  if %jit% EQU 1 call :runsub 3 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do4
-if %utf% EQU 0 (
-  echo Test 4 Skipped due to absence of UTF-%bits% support.
-  goto :eof
-)
-  call :runsub 4 testout "UTF-%bits% support - (Compatible with Perl >= 5.10)" -q
-  call :runsub 4 testoutstudy "Test with Study Override" -q -s
-  if %jit% EQU 1 call :runsub 4 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do5
-if %utf% EQU 0 (
-  echo Test 5 Skipped due to absence of UTF-%bits% support.
-  goto :eof
-)
-  call :runsub 5 testout "API, internals, and non-Perl stuff for UTF-%bits%" -q
-  call :runsub 5 testoutstudy "Test with Study Override" -q -s
-  if %jit% EQU 1 call :runsub 5 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do6
-if %ucp% EQU 0 (
-  echo Test 6 Skipped due to absence of Unicode property support.
-  goto :eof
-)
-  call :runsub 6 testout "Unicode property support (Compatible with Perl >= 5.10)" -q
-  call :runsub 6 testoutstudy "Test with Study Override" -q -s
-  if %jit% EQU 1 call :runsub 6 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do7
-if %ucp% EQU 0 (
-  echo Test 7 Skipped due to absence of Unicode property support.
-  goto :eof
-)
-  call :runsub 7 testout "API, internals, and non-Perl stuff for Unicode property support" -q
-  call :runsub 7 testoutstudy "Test with Study Override" -q -s
-  if %jit% EQU 1 call :runsub 7 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do8
-  call :runsub 8 testout "DFA matching main functionality" -q -dfa
-  call :runsub 8 testoutstudy "Test with Study Override" -q -dfa -s
-goto :eof
-
-:do9
-if %utf% EQU 0 (
-  echo Test 9 Skipped due to absence of UTF-%bits% support.
-  goto :eof
-)
-  call :runsub 9 testout "DFA matching with UTF-%bits%" -q -dfa
-  call :runsub 9 testoutstudy "Test with Study Override" -q -dfa -s
-  goto :eof
-
-:do10
-if %ucp% EQU 0 (
-  echo Test 10 Skipped due to absence of Unicode property support.
-  goto :eof
-)
-  call :runsub 10 testout "DFA matching with Unicode properties" -q -dfa
-  call :runsub 10 testoutstudy "Test with Study Override" -q -dfa -s
-goto :eof
-
-:do11
-if NOT %link_size% EQU 2 (
-  echo Test 11 Skipped because link size is not 2.
-  goto :eof
-)
-if %ucp% EQU 0 (
-  echo Test 11 Skipped due to absence of Unicode property support.
-  goto :eof
-)
-  call :runsub 11 testout "Internal offsets and code size tests" -q
-  call :runsub 11 testoutstudy "Test with Study Override" -q -s
-goto :eof
-
-:do12
-if %jit% EQU 0 (
-  echo Test 12 Skipped due to absence of JIT support.
-  goto :eof
-)
-  call :runsub 12 testout "JIT-specific features (JIT available)" -q
-goto :eof
-
-:do13
-if %jit% EQU 1 (
-  echo Test 13 Skipped due to presence of JIT support.
-  goto :eof
-)
-  call :runsub 13 testout "JIT-specific features (JIT not available)" -q
-goto :eof
-
-:do14
-if NOT %bits% EQU 8 (
-  echo Test 14 Skipped when running 16/32-bit tests.
-  goto :eof
-)
-  copy /Y %srcdir%\testdata\saved16 testsaved16
-  copy /Y %srcdir%\testdata\saved32 testsaved32
-  call :runsub 14 testout "Specials for the basic 8-bit library" -q
-  call :runsub 14 testoutstudy "Test with Study Override" -q -s
-  if %jit% EQU 1 call :runsub 14 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do15
-if NOT %bits% EQU 8 (
-  echo Test 15 Skipped when running 16/32-bit tests.
-  goto :eof
-)
-if %utf% EQU 0 (
-  echo Test 15 Skipped due to absence of UTF-%bits% support.
-  goto :eof
-)
-  call :runsub 15 testout "Specials for the 8-bit library with UTF-%bits% support" -q
-  call :runsub 15 testoutstudy "Test with Study Override" -q -s
-  if %jit% EQU 1 call :runsub 15 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do16
-if NOT %bits% EQU 8 (
-  echo Test 16 Skipped when running 16/32-bit tests.
-  goto :eof
-)
-if %ucp% EQU 0 (
-  echo Test 16 Skipped due to absence of Unicode property support.
-  goto :eof
-)
-  call :runsub 16 testout "Specials for the 8-bit library with Unicode propery support" -q
-  call :runsub 16 testoutstudy "Test with Study Override" -q -s
-  if %jit% EQU 1 call :runsub 16 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do17
-if %bits% EQU 8 (
-  echo Test 17 Skipped when running 8-bit tests.
-  goto :eof
-)
-  call :runsub 17 testout "Specials for the basic 16/32-bit library" -q
-  call :runsub 17 testoutstudy "Test with Study Override" -q -s
-  if %jit% EQU 1 call :runsub 17 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do18
-if %bits% EQU 8 (
-  echo Test 18 Skipped when running 8-bit tests.
-  goto :eof
-)
-if %utf% EQU 0 (
-  echo Test 18 Skipped due to absence of UTF-%bits% support.
-  goto :eof
-)
-  call :runsub 18 testout "Specials for the 16/32-bit library with UTF-%bits% support" -q
-  call :runsub 18 testoutstudy "Test with Study Override" -q -s
-  if %jit% EQU 1 call :runsub 18 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do19
-if %bits% EQU 8 (
-  echo Test 19 Skipped when running 8-bit tests.
-  goto :eof
-)
-if %ucp% EQU 0 (
-  echo Test 19 Skipped due to absence of Unicode property support.
-  goto :eof
-)
-  call :runsub 19 testout "Specials for the 16/32-bit library with Unicode property support" -q
-  call :runsub 19 testoutstudy "Test with Study Override" -q -s
-  if %jit% EQU 1 call :runsub 19 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do20
-if %bits% EQU 8 (
-  echo Test 20 Skipped when running 8-bit tests.
-  goto :eof
-)
-  call :runsub 20 testout "DFA specials for the basic 16/32-bit library" -q -dfa
-  call :runsub 20 testoutstudy "Test with Study Override" -q -dfa -s
-goto :eof
-
-:do21
-if %bits% EQU 8 (
-  echo Test 21 Skipped when running 8-bit tests.
-  goto :eof
-)
-if NOT %link_size% EQU 2 (
-  echo Test 21 Skipped because link size is not 2.
-  goto :eof
-)
-copy /Y %srcdir%\testdata\saved8 testsaved8
-copy /Y %srcdir%\testdata\saved16LE-1 testsaved16LE-1
-copy /Y %srcdir%\testdata\saved16BE-1 testsaved16BE-1
-copy /Y %srcdir%\testdata\saved32LE-1 testsaved32LE-1
-copy /Y %srcdir%\testdata\saved32BE-1 testsaved32BE-1
-call :runsub 21 testout "Reloads for the basic 16/32-bit library" -q
-call :runsub 21 testoutstudy "Test with Study Override" -q -s
-if %jit% EQU 1 call :runsub 21 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do22
-if %bits% EQU 8 (
-  echo Test 22 Skipped when running 8-bit tests.
-  goto :eof
-)
-if %utf% EQU 0 (
-  echo Test 22 Skipped due to absence of UTF-%bits% support.
-  goto :eof
-)
-if NOT %link_size% EQU 2 (
-  echo Test 22 Skipped because link size is not 2.
-  goto :eof
-)
-copy /Y %srcdir%\testdata\saved16LE-2 testsaved16LE-2
-copy /Y %srcdir%\testdata\saved16BE-2 testsaved16BE-2
-copy /Y %srcdir%\testdata\saved32LE-2 testsaved32LE-2
-copy /Y %srcdir%\testdata\saved32BE-2 testsaved32BE-2
-call :runsub 22 testout "Reloads for the 16/32-bit library with UTF-16/32 support" -q
-call :runsub 22 testoutstudy "Test with Study Override" -q -s
-if %jit% EQU 1 call :runsub 22 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do23
-if NOT %bits% EQU 16 (
-  echo Test 23 Skipped when running 8/32-bit tests.
-  goto :eof
-)
-call :runsub 23 testout "Specials for the 16-bit library" -q
-call :runsub 23 testoutstudy "Test with Study Override" -q -s
-if %jit% EQU 1 call :runsub 23 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do24
-if NOT %bits% EQU 16 (
-  echo Test 24 Skipped when running 8/32-bit tests.
-  goto :eof
-)
-if %utf% EQU 0 (
-  echo Test 24 Skipped due to absence of UTF-%bits% support.
-  goto :eof
-)
-call :runsub 24 testout "Specials for the 16-bit library with UTF-16 support" -q
-call :runsub 24 testoutstudy "Test with Study Override" -q -s
-if %jit% EQU 1 call :runsub 24 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do25
-if NOT %bits% EQU 32 (
-  echo Test 25 Skipped when running 8/16-bit tests.
-  goto :eof
-)
-call :runsub 25 testout "Specials for the 32-bit library" -q
-call :runsub 25 testoutstudy "Test with Study Override" -q -s
-if %jit% EQU 1 call :runsub 25 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:do26
-if NOT %bits% EQU 32 (
-  echo Test 26 Skipped when running 8/16-bit tests.
-  goto :eof
-)
-if %utf% EQU 0 (
-  echo Test 26 Skipped due to absence of UTF-%bits% support.
-  goto :eof
-)
-call :runsub 26 testout "Specials for the 32-bit library with UTF-32 support" -q
-call :runsub 26 testoutstudy "Test with Study Override" -q -s
-if %jit% EQU 1 call :runsub 26 testoutjit "Test with JIT Override" -q -s+
-goto :eof
-
-:conferror
-@echo.
-@echo Either your build is incomplete or you have a configuration error.
-@echo.
-@echo If configured with cmake and executed via "make test" or the MSVC "RUN_TESTS"
-@echo project, pcre_test.bat defines variables and automatically calls RunTest.bat.
-@echo For manual testing of all available features, after configuring with cmake
-@echo and building, you can run the built pcre_test.bat. For best results with
-@echo cmake builds and tests avoid directories with full path names that include
-@echo spaces for source or build.
-@echo.
-@echo Otherwise, if the build dir is in a subdir of the source dir, testdata needed
-@echo for input and verification should be found automatically when (from the
-@echo location of the the built exes) you call RunTest.bat. By default RunTest.bat
-@echo runs all tests compatible with the linked pcre library but it can be given
-@echo a test number as an argument.
-@echo.
-@echo If the build dir is not under the source dir you can either copy your exes
-@echo to the source folder or copy RunTest.bat and the testdata folder to the
-@echo location of your built exes and then run RunTest.bat.
-@echo.
-goto :eof
+@echo off
+@rem This file must use CRLF linebreaks to function properly
+@rem and requires both pcretest and pcregrep
+@rem  This file was originally contributed by Ralf Junker, and touched up by
+@rem  Daniel Richard G. Tests 10-12 added by Philip H.
+@rem  Philip H also changed test 3 to use "wintest" files.
+@rem
+@rem  Updated by Tom Fortmann to support explicit test numbers on the command line.
+@rem  Added argument validation and added error reporting.
+@rem
+@rem  MS Windows batch file to run pcretest on testfiles with the correct
+@rem  options.
+@rem
+@rem Sheri Pierce added logic to skip feature dependent tests
+@rem tests 4 5 9 15 and 18 require utf support
+@rem tests 6 7 10 16 and 19 require ucp support
+@rem 11 requires ucp and link size 2
+@rem 12 requires presence of jit support
+@rem 13 requires absence of jit support
+@rem Sheri P also added override tests for study and jit testing
+@rem Zoltan Herczeg added libpcre16 support
+@rem Zoltan Herczeg added libpcre32 support
+
+setlocal enabledelayedexpansion
+if [%srcdir%]==[] (
+if exist testdata\ set srcdir=.)
+if [%srcdir%]==[] (
+if exist ..\testdata\ set srcdir=..)
+if [%srcdir%]==[] (
+if exist ..\..\testdata\ set srcdir=..\..)
+if NOT exist %srcdir%\testdata\ (
+Error: echo distribution testdata folder not found!
+call :conferror
+exit /b 1
+goto :eof
+)
+
+if [%pcretest%]==[] set pcretest=.\pcretest.exe
+
+echo source dir is %srcdir%
+echo pcretest=%pcretest%
+
+if NOT exist %pcretest% (
+echo Error: %pcretest% not found!
+echo.
+call :conferror
+exit /b 1
+)
+
+%pcretest% -C linksize >NUL
+set link_size=%ERRORLEVEL%
+%pcretest% -C pcre8 >NUL
+set support8=%ERRORLEVEL%
+%pcretest% -C pcre16 >NUL
+set support16=%ERRORLEVEL%
+%pcretest% -C pcre32 >NUL
+set support32=%ERRORLEVEL%
+%pcretest% -C utf >NUL
+set utf=%ERRORLEVEL%
+%pcretest% -C ucp >NUL
+set ucp=%ERRORLEVEL%
+%pcretest% -C jit >NUL
+set jit=%ERRORLEVEL%
+
+if %support8% EQU 1 (
+if not exist testout8 md testout8
+if not exist testoutstudy8 md testoutstudy8
+if not exist testoutjit8 md testoutjit8
+)
+
+if %support16% EQU 1 (
+if not exist testout16 md testout16
+if not exist testoutstudy16 md testoutstudy16
+if not exist testoutjit16 md testoutjit16
+)
+
+if %support16% EQU 1 (
+if not exist testout32 md testout32
+if not exist testoutstudy32 md testoutstudy32
+if not exist testoutjit32 md testoutjit32
+)
+
+set do1=no
+set do2=no
+set do3=no
+set do4=no
+set do5=no
+set do6=no
+set do7=no
+set do8=no
+set do9=no
+set do10=no
+set do11=no
+set do12=no
+set do13=no
+set do14=no
+set do15=no
+set do16=no
+set do17=no
+set do18=no
+set do19=no
+set do20=no
+set do21=no
+set do22=no
+set do23=no
+set do24=no
+set do25=no
+set do26=no
+set all=yes
+
+for %%a in (%*) do (
+  set valid=no
+  for %%v in (1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26) do if %%v == %%a set valid=yes
+  if "!valid!" == "yes" (
+    set do%%a=yes
+    set all=no
+) else (
+    echo Invalid test number - %%a!
+        echo Usage %0 [ test_number ] ...
+        echo Where test_number is one or more optional test numbers 1 through 26, default is all tests.
+        exit /b 1
+)
+)
+set failed="no"
+
+if "%all%" == "yes" (
+  set do1=yes
+  set do2=yes
+  set do3=yes
+  set do4=yes
+  set do5=yes
+  set do6=yes
+  set do7=yes
+  set do8=yes
+  set do9=yes
+  set do10=yes
+  set do11=yes
+  set do12=yes
+  set do13=yes
+  set do14=yes
+  set do15=yes
+  set do16=yes
+  set do17=yes
+  set do18=yes
+  set do19=yes
+  set do20=yes
+  set do21=yes
+  set do22=yes
+  set do23=yes
+  set do24=yes
+  set do25=yes
+  set do26=yes
+)
+
+@echo RunTest.bat's pcretest output is written to newly created subfolders named
+@echo testout, testoutstudy and testoutjit.
+@echo.
+
+set mode=
+set bits=8
+
+:nextMode
+if "%mode%" == "" (
+  if %support8% EQU 0 goto modeSkip
+  echo.
+  echo ---- Testing 8-bit library ----
+  echo.
+)
+if "%mode%" == "-16" (
+  if %support16% EQU 0 goto modeSkip
+  echo.
+  echo ---- Testing 16-bit library ----
+  echo.
+)
+if "%mode%" == "-32" (
+  if %support32% EQU 0 goto modeSkip
+  echo.
+  echo ---- Testing 32-bit library ----
+  echo.
+)
+if "%do1%" == "yes" call :do1
+if "%do2%" == "yes" call :do2
+if "%do3%" == "yes" call :do3
+if "%do4%" == "yes" call :do4
+if "%do5%" == "yes" call :do5
+if "%do6%" == "yes" call :do6
+if "%do7%" == "yes" call :do7
+if "%do8%" == "yes" call :do8
+if "%do9%" == "yes" call :do9
+if "%do10%" == "yes" call :do10
+if "%do11%" == "yes" call :do11
+if "%do12%" == "yes" call :do12
+if "%do13%" == "yes" call :do13
+if "%do14%" == "yes" call :do14
+if "%do15%" == "yes" call :do15
+if "%do16%" == "yes" call :do16
+if "%do17%" == "yes" call :do17
+if "%do18%" == "yes" call :do18
+if "%do19%" == "yes" call :do19
+if "%do20%" == "yes" call :do20
+if "%do21%" == "yes" call :do21
+if "%do22%" == "yes" call :do22
+if "%do23%" == "yes" call :do23
+if "%do24%" == "yes" call :do24
+if "%do25%" == "yes" call :do25
+if "%do26%" == "yes" call :do26
+:modeSkip
+if "%mode%" == "" (
+  set mode=-16
+  set bits=16
+  goto nextMode
+)
+if "%mode%" == "-16" (
+  set mode=-32
+  set bits=32
+  goto nextMode
+)
+
+@rem If mode is -32, testing is finished
+if %failed% == "yes" (
+echo In above output, one or more of the various tests failed!
+exit /b 1
+)
+echo All OK
+goto :eof
+
+:runsub
+@rem Function to execute pcretest and compare the output
+@rem Arguments are as follows:
+@rem
+@rem       1 = test number
+@rem       2 = outputdir
+@rem       3 = test name use double quotes
+@rem   4 - 9 = pcretest options
+
+if [%1] == [] (
+  echo Missing test number argument!
+  exit /b 1
+)
+
+if [%2] == [] (
+  echo Missing outputdir!
+  exit /b 1
+)
+
+if [%3] == [] (
+  echo Missing test name argument!
+  exit /b 1
+)
+
+set testinput=testinput%1
+set testoutput=testoutput%1
+if exist %srcdir%\testdata\win%testinput% (
+  set testinput=wintestinput%1
+  set testoutput=wintestoutput%1
+)
+
+echo Test %1: %3
+%pcretest% %mode% %4 %5 %6 %7 %8 %9 %srcdir%\testdata\%testinput% >%2%bits%\%testoutput%
+if errorlevel 1 (
+  echo.          failed executing command-line:
+  echo.            %pcretest% %mode% %4 %5 %6 %7 %8 %9 %srcdir%\testdata\%testinput% ^>%2%bits%\%testoutput%
+  set failed="yes"
+  goto :eof
+)
+
+set type=
+if [%1]==[11] (
+  set type=-%bits%
+)
+if [%1]==[18] (
+  set type=-%bits%
+)
+if [%1]==[21] (
+  set type=-%bits%
+)
+if [%1]==[22] (
+  set type=-%bits%
+)
+
+fc /n %srcdir%\testdata\%testoutput%%type% %2%bits%\%testoutput% >NUL
+
+if errorlevel 1 (
+  echo.          failed comparison: fc /n %srcdir%\testdata\%testoutput% %2%bits%\%testoutput%
+  if [%1]==[2] (
+    echo.
+    echo ** Test 2 requires a lot of stack. PCRE can be configured to
+    echo ** use heap for recursion. Otherwise, to pass Test 2
+    echo ** you generally need to allocate 8 mb stack to PCRE.
+    echo ** See the 'pcrestack' page for a discussion of PCRE's
+    echo ** stack usage.
+    echo.
+)
+  if [%1]==[3] (
+    echo.
+    echo ** Test 3 failure usually means french locale is not
+    echo ** available on the system, rather than a bug or problem with PCRE.
+    echo.
+    goto :eof
+)
+
+  set failed="yes"
+  goto :eof
+)
+
+echo.          Passed.
+goto :eof
+
+:do1
+call :runsub 1 testout "Main functionality (Compatible with Perl >= 5.10)" -q
+call :runsub 1 testoutstudy "Test with Study Override" -q -s
+if %jit% EQU 1 call :runsub 1 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do2
+  call :runsub 2 testout "API, errors, internals, and non-Perl stuff" -q
+  call :runsub 2 testoutstudy "Test with Study Override" -q -s
+  if %jit% EQU 1 call :runsub 2 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do3
+  call :runsub 3 testout "Locale-specific features" -q
+  call :runsub 3 testoutstudy "Test with Study Override" -q -s
+  if %jit% EQU 1 call :runsub 3 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do4
+if %utf% EQU 0 (
+  echo Test 4 Skipped due to absence of UTF-%bits% support.
+  goto :eof
+)
+  call :runsub 4 testout "UTF-%bits% support - (Compatible with Perl >= 5.10)" -q
+  call :runsub 4 testoutstudy "Test with Study Override" -q -s
+  if %jit% EQU 1 call :runsub 4 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do5
+if %utf% EQU 0 (
+  echo Test 5 Skipped due to absence of UTF-%bits% support.
+  goto :eof
+)
+  call :runsub 5 testout "API, internals, and non-Perl stuff for UTF-%bits%" -q
+  call :runsub 5 testoutstudy "Test with Study Override" -q -s
+  if %jit% EQU 1 call :runsub 5 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do6
+if %ucp% EQU 0 (
+  echo Test 6 Skipped due to absence of Unicode property support.
+  goto :eof
+)
+  call :runsub 6 testout "Unicode property support (Compatible with Perl >= 5.10)" -q
+  call :runsub 6 testoutstudy "Test with Study Override" -q -s
+  if %jit% EQU 1 call :runsub 6 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do7
+if %ucp% EQU 0 (
+  echo Test 7 Skipped due to absence of Unicode property support.
+  goto :eof
+)
+  call :runsub 7 testout "API, internals, and non-Perl stuff for Unicode property support" -q
+  call :runsub 7 testoutstudy "Test with Study Override" -q -s
+  if %jit% EQU 1 call :runsub 7 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do8
+  call :runsub 8 testout "DFA matching main functionality" -q -dfa
+  call :runsub 8 testoutstudy "Test with Study Override" -q -dfa -s
+goto :eof
+
+:do9
+if %utf% EQU 0 (
+  echo Test 9 Skipped due to absence of UTF-%bits% support.
+  goto :eof
+)
+  call :runsub 9 testout "DFA matching with UTF-%bits%" -q -dfa
+  call :runsub 9 testoutstudy "Test with Study Override" -q -dfa -s
+  goto :eof
+
+:do10
+if %ucp% EQU 0 (
+  echo Test 10 Skipped due to absence of Unicode property support.
+  goto :eof
+)
+  call :runsub 10 testout "DFA matching with Unicode properties" -q -dfa
+  call :runsub 10 testoutstudy "Test with Study Override" -q -dfa -s
+goto :eof
+
+:do11
+if NOT %link_size% EQU 2 (
+  echo Test 11 Skipped because link size is not 2.
+  goto :eof
+)
+if %ucp% EQU 0 (
+  echo Test 11 Skipped due to absence of Unicode property support.
+  goto :eof
+)
+  call :runsub 11 testout "Internal offsets and code size tests" -q
+  call :runsub 11 testoutstudy "Test with Study Override" -q -s
+goto :eof
+
+:do12
+if %jit% EQU 0 (
+  echo Test 12 Skipped due to absence of JIT support.
+  goto :eof
+)
+  call :runsub 12 testout "JIT-specific features (JIT available)" -q
+goto :eof
+
+:do13
+if %jit% EQU 1 (
+  echo Test 13 Skipped due to presence of JIT support.
+  goto :eof
+)
+  call :runsub 13 testout "JIT-specific features (JIT not available)" -q
+goto :eof
+
+:do14
+if NOT %bits% EQU 8 (
+  echo Test 14 Skipped when running 16/32-bit tests.
+  goto :eof
+)
+  copy /Y %srcdir%\testdata\saved16 testsaved16
+  copy /Y %srcdir%\testdata\saved32 testsaved32
+  call :runsub 14 testout "Specials for the basic 8-bit library" -q
+  call :runsub 14 testoutstudy "Test with Study Override" -q -s
+  if %jit% EQU 1 call :runsub 14 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do15
+if NOT %bits% EQU 8 (
+  echo Test 15 Skipped when running 16/32-bit tests.
+  goto :eof
+)
+if %utf% EQU 0 (
+  echo Test 15 Skipped due to absence of UTF-%bits% support.
+  goto :eof
+)
+  call :runsub 15 testout "Specials for the 8-bit library with UTF-%bits% support" -q
+  call :runsub 15 testoutstudy "Test with Study Override" -q -s
+  if %jit% EQU 1 call :runsub 15 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do16
+if NOT %bits% EQU 8 (
+  echo Test 16 Skipped when running 16/32-bit tests.
+  goto :eof
+)
+if %ucp% EQU 0 (
+  echo Test 16 Skipped due to absence of Unicode property support.
+  goto :eof
+)
+  call :runsub 16 testout "Specials for the 8-bit library with Unicode propery support" -q
+  call :runsub 16 testoutstudy "Test with Study Override" -q -s
+  if %jit% EQU 1 call :runsub 16 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do17
+if %bits% EQU 8 (
+  echo Test 17 Skipped when running 8-bit tests.
+  goto :eof
+)
+  call :runsub 17 testout "Specials for the basic 16/32-bit library" -q
+  call :runsub 17 testoutstudy "Test with Study Override" -q -s
+  if %jit% EQU 1 call :runsub 17 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do18
+if %bits% EQU 8 (
+  echo Test 18 Skipped when running 8-bit tests.
+  goto :eof
+)
+if %utf% EQU 0 (
+  echo Test 18 Skipped due to absence of UTF-%bits% support.
+  goto :eof
+)
+  call :runsub 18 testout "Specials for the 16/32-bit library with UTF-%bits% support" -q
+  call :runsub 18 testoutstudy "Test with Study Override" -q -s
+  if %jit% EQU 1 call :runsub 18 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do19
+if %bits% EQU 8 (
+  echo Test 19 Skipped when running 8-bit tests.
+  goto :eof
+)
+if %ucp% EQU 0 (
+  echo Test 19 Skipped due to absence of Unicode property support.
+  goto :eof
+)
+  call :runsub 19 testout "Specials for the 16/32-bit library with Unicode property support" -q
+  call :runsub 19 testoutstudy "Test with Study Override" -q -s
+  if %jit% EQU 1 call :runsub 19 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do20
+if %bits% EQU 8 (
+  echo Test 20 Skipped when running 8-bit tests.
+  goto :eof
+)
+  call :runsub 20 testout "DFA specials for the basic 16/32-bit library" -q -dfa
+  call :runsub 20 testoutstudy "Test with Study Override" -q -dfa -s
+goto :eof
+
+:do21
+if %bits% EQU 8 (
+  echo Test 21 Skipped when running 8-bit tests.
+  goto :eof
+)
+if NOT %link_size% EQU 2 (
+  echo Test 21 Skipped because link size is not 2.
+  goto :eof
+)
+copy /Y %srcdir%\testdata\saved8 testsaved8
+copy /Y %srcdir%\testdata\saved16LE-1 testsaved16LE-1
+copy /Y %srcdir%\testdata\saved16BE-1 testsaved16BE-1
+copy /Y %srcdir%\testdata\saved32LE-1 testsaved32LE-1
+copy /Y %srcdir%\testdata\saved32BE-1 testsaved32BE-1
+call :runsub 21 testout "Reloads for the basic 16/32-bit library" -q
+call :runsub 21 testoutstudy "Test with Study Override" -q -s
+if %jit% EQU 1 call :runsub 21 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do22
+if %bits% EQU 8 (
+  echo Test 22 Skipped when running 8-bit tests.
+  goto :eof
+)
+if %utf% EQU 0 (
+  echo Test 22 Skipped due to absence of UTF-%bits% support.
+  goto :eof
+)
+if NOT %link_size% EQU 2 (
+  echo Test 22 Skipped because link size is not 2.
+  goto :eof
+)
+copy /Y %srcdir%\testdata\saved16LE-2 testsaved16LE-2
+copy /Y %srcdir%\testdata\saved16BE-2 testsaved16BE-2
+copy /Y %srcdir%\testdata\saved32LE-2 testsaved32LE-2
+copy /Y %srcdir%\testdata\saved32BE-2 testsaved32BE-2
+call :runsub 22 testout "Reloads for the 16/32-bit library with UTF-16/32 support" -q
+call :runsub 22 testoutstudy "Test with Study Override" -q -s
+if %jit% EQU 1 call :runsub 22 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do23
+if NOT %bits% EQU 16 (
+  echo Test 23 Skipped when running 8/32-bit tests.
+  goto :eof
+)
+call :runsub 23 testout "Specials for the 16-bit library" -q
+call :runsub 23 testoutstudy "Test with Study Override" -q -s
+if %jit% EQU 1 call :runsub 23 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do24
+if NOT %bits% EQU 16 (
+  echo Test 24 Skipped when running 8/32-bit tests.
+  goto :eof
+)
+if %utf% EQU 0 (
+  echo Test 24 Skipped due to absence of UTF-%bits% support.
+  goto :eof
+)
+call :runsub 24 testout "Specials for the 16-bit library with UTF-16 support" -q
+call :runsub 24 testoutstudy "Test with Study Override" -q -s
+if %jit% EQU 1 call :runsub 24 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do25
+if NOT %bits% EQU 32 (
+  echo Test 25 Skipped when running 8/16-bit tests.
+  goto :eof
+)
+call :runsub 25 testout "Specials for the 32-bit library" -q
+call :runsub 25 testoutstudy "Test with Study Override" -q -s
+if %jit% EQU 1 call :runsub 25 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:do26
+if NOT %bits% EQU 32 (
+  echo Test 26 Skipped when running 8/16-bit tests.
+  goto :eof
+)
+if %utf% EQU 0 (
+  echo Test 26 Skipped due to absence of UTF-%bits% support.
+  goto :eof
+)
+call :runsub 26 testout "Specials for the 32-bit library with UTF-32 support" -q
+call :runsub 26 testoutstudy "Test with Study Override" -q -s
+if %jit% EQU 1 call :runsub 26 testoutjit "Test with JIT Override" -q -s+
+goto :eof
+
+:conferror
+@echo.
+@echo Either your build is incomplete or you have a configuration error.
+@echo.
+@echo If configured with cmake and executed via "make test" or the MSVC "RUN_TESTS"
+@echo project, pcre_test.bat defines variables and automatically calls RunTest.bat.
+@echo For manual testing of all available features, after configuring with cmake
+@echo and building, you can run the built pcre_test.bat. For best results with
+@echo cmake builds and tests avoid directories with full path names that include
+@echo spaces for source or build.
+@echo.
+@echo Otherwise, if the build dir is in a subdir of the source dir, testdata needed
+@echo for input and verification should be found automatically when (from the
+@echo location of the the built exes) you call RunTest.bat. By default RunTest.bat
+@echo runs all tests compatible with the linked pcre library but it can be given
+@echo a test number as an argument.
+@echo.
+@echo If the build dir is not under the source dir you can either copy your exes
+@echo to the source folder or copy RunTest.bat and the testdata folder to the
+@echo location of your built exes and then run RunTest.bat.
+@echo.
+goto :eof
diff --git a/dist/aclocal.m4 b/dist/aclocal.m4
index 693248e..be3d337 100644
--- a/dist/aclocal.m4
+++ b/dist/aclocal.m4
@@ -1,6 +1,6 @@
-# generated automatically by aclocal 1.14.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.15 -*- Autoconf -*-
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
 
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -235,7 +235,7 @@
 AS_VAR_IF([$1], [""], [$5], [$4])dnl
 ])# PKG_CHECK_VAR
 
-# Copyright (C) 2002-2013 Free Software Foundation, Inc.
+# Copyright (C) 2002-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -247,10 +247,10 @@
 # generated from the m4 files accompanying Automake X.Y.
 # (This private macro should not be called outside this file.)
 AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.14'
+[am__api_version='1.15'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.14.1], [],
+m4_if([$1], [1.15], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -266,12 +266,12 @@
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.14.1])dnl
+[AM_AUTOMAKE_VERSION([1.15])dnl
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
 _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 
-# Copyright (C) 2011-2013 Free Software Foundation, Inc.
+# Copyright (C) 2011-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -333,7 +333,7 @@
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -378,15 +378,14 @@
 # configured tree to be moved without reconfiguration.
 
 AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
 ])
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -417,7 +416,7 @@
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -608,7 +607,7 @@
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
 
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -684,7 +683,7 @@
 
 # Do all the work for Automake.                             -*- Autoconf -*-
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -774,8 +773,8 @@
 # <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
 # <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
 AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
 AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([AC_PROG_MAKE_SET])dnl
 AC_REQUIRE([AM_SET_LEADING_DOT])dnl
@@ -848,7 +847,11 @@
 END
     AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
   fi
-fi])
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
 
 dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
 dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
@@ -877,7 +880,7 @@
 done
 echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -888,7 +891,7 @@
 # Define $install_sh.
 AC_DEFUN([AM_PROG_INSTALL_SH],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
   case $am_aux_dir in
   *\ * | *\	*)
     install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -898,7 +901,7 @@
 fi
 AC_SUBST([install_sh])])
 
-# Copyright (C) 2003-2013 Free Software Foundation, Inc.
+# Copyright (C) 2003-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -919,7 +922,7 @@
 
 # Check to see how 'make' treats includes.	            -*- Autoconf -*-
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -969,7 +972,7 @@
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -1008,7 +1011,7 @@
 
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -1037,7 +1040,7 @@
 AC_DEFUN([_AM_IF_OPTION],
 [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
 
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -1084,7 +1087,7 @@
 # For backward compatibility.
 AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -1103,7 +1106,7 @@
 
 # Check to make sure that the build environment is sane.    -*- Autoconf -*-
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -1184,7 +1187,7 @@
 rm -f conftest.file
 ])
 
-# Copyright (C) 2009-2013 Free Software Foundation, Inc.
+# Copyright (C) 2009-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -1244,7 +1247,7 @@
 _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
 ])
 
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -1272,7 +1275,7 @@
 INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
-# Copyright (C) 2006-2013 Free Software Foundation, Inc.
+# Copyright (C) 2006-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -1291,7 +1294,7 @@
 
 # Check how to create a tarball.                            -*- Autoconf -*-
 
-# Copyright (C) 2004-2013 Free Software Foundation, Inc.
+# Copyright (C) 2004-2014 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
diff --git a/dist/ar-lib b/dist/ar-lib
index fe2301e..463b9ec 100755
--- a/dist/ar-lib
+++ b/dist/ar-lib
@@ -4,7 +4,7 @@
 me=ar-lib
 scriptversion=2012-03-01.08; # UTC
 
-# Copyright (C) 2010-2013 Free Software Foundation, Inc.
+# Copyright (C) 2010-2014 Free Software Foundation, Inc.
 # Written by Peter Rosin <peda@lysator.liu.se>.
 #
 # This program is free software; you can redistribute it and/or modify
diff --git a/dist/compile b/dist/compile
index 531136b..a85b723 100755
--- a/dist/compile
+++ b/dist/compile
@@ -3,7 +3,7 @@
 
 scriptversion=2012-10-14.11; # UTC
 
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
 # Written by Tom Tromey <tromey@cygnus.com>.
 #
 # This program is free software; you can redistribute it and/or modify
diff --git a/dist/config.guess b/dist/config.guess
index 9afd676..6c32c86 100755
--- a/dist/config.guess
+++ b/dist/config.guess
@@ -1,8 +1,8 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright 1992-2013 Free Software Foundation, Inc.
+#   Copyright 1992-2014 Free Software Foundation, Inc.
 
-timestamp='2013-11-29'
+timestamp='2014-11-04'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -24,12 +24,12 @@
 # program.  This Exception is an additional permission under section 7
 # of the GNU General Public License, version 3 ("GPLv3").
 #
-# Originally written by Per Bothner.
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
 #
 # You can get the latest version of this script from:
 # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
 #
-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+# Please send patches to <config-patches@gnu.org>.
 
 
 me=`echo "$0" | sed -e 's,.*/,,'`
@@ -50,7 +50,7 @@
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright 1992-2013 Free Software Foundation, Inc.
+Copyright 1992-2014 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -149,7 +149,7 @@
 	LIBC=gnu
 	#endif
 	EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
 	;;
 esac
 
@@ -579,8 +579,9 @@
 	else
 		IBM_ARCH=powerpc
 	fi
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
+	if [ -x /usr/bin/lslpp ] ; then
+		IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+			   awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
 	else
 		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
@@ -826,7 +827,7 @@
     *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
-    i*:MSYS*:*)
+    *:MSYS*:*)
 	echo ${UNAME_MACHINE}-pc-msys
 	exit ;;
     i*:windows32*:*)
@@ -969,10 +970,10 @@
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
-    or1k:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+    openrisc*:Linux:*:*)
+	echo or1k-unknown-linux-${LIBC}
 	exit ;;
-    or32:Linux:*:*)
+    or32:Linux:*:* | or1k*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     padre:Linux:*:*)
@@ -1371,154 +1372,6 @@
 	exit ;;
 esac
 
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-	"4"
-#else
-	""
-#endif
-	); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-#  include <sys/param.h>
-#  if defined (BSD)
-#   if BSD == 43
-      printf ("vax-dec-bsd4.3\n"); exit (0);
-#   else
-#    if BSD == 199006
-      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-#    else
-      printf ("vax-dec-bsd\n"); exit (0);
-#    endif
-#   endif
-#  else
-    printf ("vax-dec-bsd\n"); exit (0);
-#  endif
-# else
-    printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
-	{ echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
-	exit ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit ;;
-    c34*)
-	echo c34-convex-bsd
-	exit ;;
-    c38*)
-	echo c38-convex-bsd
-	exit ;;
-    c4*)
-	echo c4-convex-bsd
-	exit ;;
-    esac
-fi
-
 cat >&2 <<EOF
 $0: unable to guess system type
 
diff --git a/dist/config.h.generic b/dist/config.h.generic
index 6492116..00a808a 100644
--- a/dist/config.h.generic
+++ b/dist/config.h.generic
@@ -162,8 +162,7 @@
 #define LINK_SIZE 2
 #endif
 
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
-   */
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
 /* This is ignored unless you are using libtool. */
 #ifndef LT_OBJDIR
 #define LT_OBJDIR ".libs/"
@@ -236,7 +235,7 @@
 #define PACKAGE_NAME "PCRE"
 
 /* Define to the full name and version of this package. */
-#define PACKAGE_STRING "PCRE 8.36"
+#define PACKAGE_STRING "PCRE 8.37"
 
 /* Define to the one symbol short name of this package. */
 #define PACKAGE_TARNAME "pcre"
@@ -245,7 +244,7 @@
 #define PACKAGE_URL ""
 
 /* Define to the version of this package. */
-#define PACKAGE_VERSION "8.36"
+#define PACKAGE_VERSION "8.37"
 
 /* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested
    parentheses (of any kind) in a pattern. This limits the amount of system
@@ -337,7 +336,7 @@
 /* #undef SUPPORT_VALGRIND */
 
 /* Version number of package */
-#define VERSION "8.36"
+#define VERSION "8.37"
 
 /* Define to empty if `const' does not conform to ANSI C. */
 /* #undef const */
diff --git a/dist/config.h.in b/dist/config.h.in
index 46f56c2..0b2f45d 100644
--- a/dist/config.h.in
+++ b/dist/config.h.in
@@ -160,8 +160,7 @@
    for longer patterns in extreme cases. */
 #undef LINK_SIZE
 
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
-   */
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
 #undef LT_OBJDIR
 
 /* The value of MATCH_LIMIT determines the default number of times the
diff --git a/dist/config.sub b/dist/config.sub
index 61cb4bc..7ffe373 100755
--- a/dist/config.sub
+++ b/dist/config.sub
@@ -1,8 +1,8 @@
 #! /bin/sh
 # Configuration validation subroutine script.
-#   Copyright 1992-2013 Free Software Foundation, Inc.
+#   Copyright 1992-2014 Free Software Foundation, Inc.
 
-timestamp='2013-10-01'
+timestamp='2014-12-03'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -25,7 +25,7 @@
 # of the GNU General Public License, version 3 ("GPLv3").
 
 
-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+# Please send patches to <config-patches@gnu.org>.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
@@ -68,7 +68,7 @@
 version="\
 GNU config.sub ($timestamp)
 
-Copyright 1992-2013 Free Software Foundation, Inc.
+Copyright 1992-2014 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -283,8 +283,10 @@
 	| mips64vr5900 | mips64vr5900el \
 	| mipsisa32 | mipsisa32el \
 	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa32r6 | mipsisa32r6el \
 	| mipsisa64 | mipsisa64el \
 	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64r6 | mipsisa64r6el \
 	| mipsisa64sb1 | mipsisa64sb1el \
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipsr5900 | mipsr5900el \
@@ -296,11 +298,11 @@
 	| nds32 | nds32le | nds32be \
 	| nios | nios2 | nios2eb | nios2el \
 	| ns16k | ns32k \
-	| open8 \
-	| or1k | or32 \
+	| open8 | or1k | or1knd | or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle \
 	| pyramid \
+	| riscv32 | riscv64 \
 	| rl78 | rx \
 	| score \
 	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
@@ -311,6 +313,7 @@
 	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
 	| ubicom32 \
 	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+	| visium \
 	| we32k \
 	| x86 | xc16x | xstormy16 | xtensa \
 	| z8k | z80)
@@ -325,6 +328,9 @@
 	c6x)
 		basic_machine=tic6x-unknown
 		;;
+	leon|leon[3-9])
+		basic_machine=sparc-$basic_machine
+		;;
 	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
 		basic_machine=$basic_machine-unknown
 		os=-none
@@ -402,8 +408,10 @@
 	| mips64vr5900-* | mips64vr5900el-* \
 	| mipsisa32-* | mipsisa32el-* \
 	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa32r6-* | mipsisa32r6el-* \
 	| mipsisa64-* | mipsisa64el-* \
 	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64r6-* | mipsisa64r6el-* \
 	| mipsisa64sb1-* | mipsisa64sb1el-* \
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
 	| mipsr5900-* | mipsr5900el-* \
@@ -415,6 +423,7 @@
 	| nios-* | nios2-* | nios2eb-* | nios2el-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| open8-* \
+	| or1k*-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
@@ -432,6 +441,7 @@
 	| ubicom32-* \
 	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
 	| vax-* \
+	| visium-* \
 	| we32k-* \
 	| x86-* | x86_64-* | xc16x-* | xps100-* \
 	| xstormy16-* | xtensa*-* \
@@ -769,6 +779,9 @@
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
+	leon-*|leon[3-9]-*)
+		basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
+		;;
 	m68knommu)
 		basic_machine=m68k-unknown
 		os=-linux
@@ -824,6 +837,10 @@
 		basic_machine=powerpc-unknown
 		os=-morphos
 		;;
+	moxiebox)
+		basic_machine=moxie-unknown
+		os=-moxiebox
+		;;
 	msdos)
 		basic_machine=i386-pc
 		os=-msdos
@@ -1369,14 +1386,14 @@
 	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
 	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
 	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
-	      | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1594,9 +1611,6 @@
 	mips*-*)
 		os=-elf
 		;;
-	or1k-*)
-		os=-elf
-		;;
 	or32-*)
 		os=-coff
 		;;
diff --git a/dist/configure b/dist/configure
index 696c02e..6f0edd2 100755
--- a/dist/configure
+++ b/dist/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for PCRE 8.36.
+# Generated by GNU Autoconf 2.69 for PCRE 8.37.
 #
 #
 # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -587,8 +587,8 @@
 # Identity of this package.
 PACKAGE_NAME='PCRE'
 PACKAGE_TARNAME='pcre'
-PACKAGE_VERSION='8.36'
-PACKAGE_STRING='PCRE 8.36'
+PACKAGE_VERSION='8.37'
+PACKAGE_STRING='PCRE 8.37'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
 
@@ -692,6 +692,7 @@
 VISIBILITY_CXXFLAGS
 VISIBILITY_CFLAGS
 CXXCPP
+LT_SYS_LIBRARY_PATH
 OTOOL64
 OTOOL
 LIPO
@@ -820,6 +821,7 @@
 enable_static
 with_pic
 enable_fast_install
+with_aix_soname
 with_gnu_ld
 with_sysroot
 enable_libtool_lock
@@ -867,6 +869,7 @@
 CXXFLAGS
 CCC
 CPP
+LT_SYS_LIBRARY_PATH
 CXXCPP
 PKG_CONFIG
 PKG_CONFIG_PATH
@@ -1415,7 +1418,7 @@
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures PCRE 8.36 to adapt to many kinds of systems.
+\`configure' configures PCRE 8.37 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1485,7 +1488,7 @@
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of PCRE 8.36:";;
+     short | recursive ) echo "Configuration of PCRE 8.37:";;
    esac
   cat <<\_ACEOF
 
@@ -1549,9 +1552,12 @@
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
   --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
                           both]
+  --with-aix-soname=aix|svr4|both
+                          shared library versioning (aka "SONAME") variant to
+                          provide on AIX, [default=aix].
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
-  --with-sysroot=DIR Search for dependent libraries within DIR
-                        (or the compiler's sysroot if not specified).
+  --with-sysroot[=DIR]    Search for dependent libraries within DIR (or the
+                          compiler's sysroot if not specified).
   --with-pcregrep-bufsize=N
                           pcregrep buffer size (default=20480, minimum=8192)
   --with-posix-malloc-threshold=NBYTES
@@ -1575,6 +1581,8 @@
   CXX         C++ compiler command
   CXXFLAGS    C++ compiler flags
   CPP         C preprocessor
+  LT_SYS_LIBRARY_PATH
+              User-defined run-time library search path.
   CXXCPP      C++ preprocessor
   PKG_CONFIG  path to pkg-config utility
   PKG_CONFIG_PATH
@@ -1654,7 +1662,7 @@
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-PCRE configure 8.36
+PCRE configure 8.37
 generated by GNU Autoconf 2.69
 
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2411,7 +2419,7 @@
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by PCRE $as_me 8.36, which was
+It was created by PCRE $as_me 8.37, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
 
   $ $0 $@
@@ -2760,7 +2768,7 @@
 
 
 
-am__api_version='1.14'
+am__api_version='1.15'
 
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
@@ -2961,8 +2969,8 @@
 ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
 program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
 
 if test x"${MISSING+set}" != xset; then
   case $am_aux_dir in
@@ -2981,7 +2989,7 @@
 $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
 fi
 
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
   case $am_aux_dir in
   *\ * | *\	*)
     install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -3275,7 +3283,7 @@
 
 # Define the identity of the package.
  PACKAGE='pcre'
- VERSION='8.36'
+ VERSION='8.37'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -3309,8 +3317,8 @@
 # <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
 mkdir_p='$(MKDIR_P)'
 
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
 # Always define AMTAR for backward compatibility.  Yes, it's still used
 # in the wild :-(  We should find a proper way to deprecate it ...
 AMTAR='$${TAR-tar}'
@@ -3367,6 +3375,7 @@
     as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
   fi
 fi
+
 # Check whether --enable-silent-rules was given.
 if test "${enable_silent_rules+set}" = set; then :
   enableval=$enable_silent_rules;
@@ -6599,8 +6608,8 @@
 
 
 
-macro_version='2.4.2'
-macro_revision='1.3337'
+macro_version='2.4.6'
+macro_revision='2.4.6'
 
 
 
@@ -6614,7 +6623,7 @@
 
 
 
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
 
 # Backslashify metacharacters that are still active within
 # double-quoted strings.
@@ -6663,7 +6672,7 @@
     $ECHO ""
 }
 
-case "$ECHO" in
+case $ECHO in
   printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
 $as_echo "printf" >&6; } ;;
   print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
@@ -6856,19 +6865,19 @@
 
 # Check whether --with-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then :
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+  withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
 else
   with_gnu_ld=no
 fi
 
 ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   # Check if gcc -print-prog-name=ld gives a path.
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
 $as_echo_n "checking for ld used by $CC... " >&6; }
   case $host in
   *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
+    # gcc leaves a trailing carriage return, which upsets mingw
     ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
   *)
     ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -6882,7 +6891,7 @@
       while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
 	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
-      test -z "$LD" && LD="$ac_prog"
+      test -z "$LD" && LD=$ac_prog
       ;;
   "")
     # If it fails, then pretend we aren't using GCC.
@@ -6893,7 +6902,7 @@
     with_gnu_ld=unknown
     ;;
   esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
 $as_echo_n "checking for GNU ld... " >&6; }
 else
@@ -6904,32 +6913,32 @@
   $as_echo_n "(cached) " >&6
 else
   if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
+      lt_cv_path_LD=$ac_dir/$ac_prog
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
+	test no != "$with_gnu_ld" && break
 	;;
       *)
-	test "$with_gnu_ld" != yes && break
+	test yes != "$with_gnu_ld" && break
 	;;
       esac
     fi
   done
-  IFS="$lt_save_ifs"
+  IFS=$lt_save_ifs
 else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
 fi
 fi
 
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
 if test -n "$LD"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
 $as_echo "$LD" >&6; }
@@ -6972,33 +6981,38 @@
 else
   if test -n "$NM"; then
   # Let the user override the test.
-  lt_cv_path_NM="$NM"
+  lt_cv_path_NM=$NM
 else
-  lt_nm_to_check="${ac_tool_prefix}nm"
+  lt_nm_to_check=${ac_tool_prefix}nm
   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
     lt_nm_to_check="$lt_nm_to_check nm"
   fi
   for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
     for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+      tmp_nm=$ac_dir/$lt_tmp_nm
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
 	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	# Adding the 'sed 1q' prevents false positives on HP-UX, which says:
 	#   nm: unknown option "B" ignored
 	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
+	# MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+	case $build_os in
+	mingw*) lt_bad_file=conftest.nm/nofile ;;
+	*) lt_bad_file=/dev/null ;;
+	esac
+	case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+	*$lt_bad_file* | *'Invalid file or object type'*)
 	  lt_cv_path_NM="$tmp_nm -B"
-	  break
+	  break 2
 	  ;;
 	*)
 	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
 	  */dev/null*)
 	    lt_cv_path_NM="$tmp_nm -p"
-	    break
+	    break 2
 	    ;;
 	  *)
 	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
@@ -7009,15 +7023,15 @@
 	esac
       fi
     done
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
   done
   : ${lt_cv_path_NM=no}
 fi
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
 $as_echo "$lt_cv_path_NM" >&6; }
-if test "$lt_cv_path_NM" != "no"; then
-  NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+  NM=$lt_cv_path_NM
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
   if test -n "$DUMPBIN"; then :
@@ -7123,9 +7137,9 @@
   fi
 fi
 
-    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
     *COFF*)
-      DUMPBIN="$DUMPBIN -symbols"
+      DUMPBIN="$DUMPBIN -symbols -headers"
       ;;
     *)
       DUMPBIN=:
@@ -7133,8 +7147,8 @@
     esac
   fi
 
-  if test "$DUMPBIN" != ":"; then
-    NM="$DUMPBIN"
+  if test : != "$DUMPBIN"; then
+    NM=$DUMPBIN
   fi
 fi
 test -z "$NM" && NM=nm
@@ -7185,7 +7199,7 @@
   $as_echo_n "(cached) " >&6
 else
     i=0
-  teststring="ABCD"
+  teststring=ABCD
 
   case $build_os in
   msdosdjgpp*)
@@ -7225,7 +7239,7 @@
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+  bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
     # This has been around since 386BSD, at least.  Likely further.
     if test -x /sbin/sysctl; then
       lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -7275,22 +7289,23 @@
     ;;
   *)
     lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+       test undefined != "$lt_cv_sys_max_cmd_len"; then
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
     else
       # Make teststring a little bigger before we do anything with it.
       # a 1K string should be a reasonable start.
-      for i in 1 2 3 4 5 6 7 8 ; do
+      for i in 1 2 3 4 5 6 7 8; do
         teststring=$teststring$teststring
       done
       SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
-      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+      while { test X`env echo "$teststring$teststring" 2>/dev/null` \
 	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
-	      test $i != 17 # 1/2 MB should be enough
+	      test 17 != "$i" # 1/2 MB should be enough
       do
         i=`expr $i + 1`
         teststring=$teststring$teststring
@@ -7308,7 +7323,7 @@
 
 fi
 
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
 $as_echo "$lt_cv_sys_max_cmd_len" >&6; }
 else
@@ -7326,30 +7341,6 @@
 : ${MV="mv -f"}
 : ${RM="rm -f"}
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
-$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,b/c, \
-    && eval 'test $(( 1 + 1 )) -eq 2 \
-    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-  && xsi_shell=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
-$as_echo "$xsi_shell" >&6; }
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
-$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
-    >/dev/null 2>&1 \
-  && lt_shell_append=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
-$as_echo "$lt_shell_append" >&6; }
-
-
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
   lt_unset=unset
 else
@@ -7472,13 +7463,13 @@
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
 case $host_os in
   cygwin* | mingw* | pw32* | cegcc*)
-    if test "$GCC" != yes; then
+    if test yes != "$GCC"; then
       reload_cmds=false
     fi
     ;;
   darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    if test yes = "$GCC"; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
     else
       reload_cmds='$LD$reload_flag -o $output$reload_objs'
     fi
@@ -7603,13 +7594,13 @@
 # Need to set the preceding variable on all platforms that support
 # interlibrary dependencies.
 # 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
 # 'pass_all' -- all dependencies passed with no checks.
 # 'test_compile' -- check by making test program.
 # 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
 
 case $host_os in
 aix[4-9]*)
@@ -7636,8 +7627,7 @@
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
-  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
-  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+  if ( file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
@@ -7673,10 +7663,6 @@
   fi
   ;;
 
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
 haiku*)
   lt_cv_deplibs_check_method=pass_all
   ;;
@@ -7715,7 +7701,7 @@
   ;;
 
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -7737,8 +7723,8 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
@@ -7791,6 +7777,9 @@
 tpf*)
   lt_cv_deplibs_check_method=pass_all
   ;;
+os2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 esac
 
 fi
@@ -7945,8 +7934,8 @@
 
 case $host_os in
 cygwin* | mingw* | pw32* | cegcc*)
-  # two different shell functions defined in ltmain.sh
-  # decide which to use based on capabilities of $DLLTOOL
+  # two different shell functions defined in ltmain.sh;
+  # decide which one to use based on capabilities of $DLLTOOL
   case `$DLLTOOL --help 2>&1` in
   *--identify-strict*)
     lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
@@ -7958,7 +7947,7 @@
   ;;
 *)
   # fallback: assume linklib IS sharedlib
-  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  lt_cv_sharedlib_from_linklib_cmd=$ECHO
   ;;
 esac
 
@@ -8112,7 +8101,7 @@
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
-      if test "$ac_status" -eq 0; then
+      if test 0 -eq "$ac_status"; then
 	# Ensure the archiver fails upon bogus file names.
 	rm -f conftest.$ac_objext libconftest.a
 	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
@@ -8120,7 +8109,7 @@
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
-	if test "$ac_status" -ne 0; then
+	if test 0 -ne "$ac_status"; then
           lt_cv_ar_at_file=@
         fi
       fi
@@ -8133,7 +8122,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
 $as_echo "$lt_cv_ar_at_file" >&6; }
 
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
   archiver_list_spec=
 else
   archiver_list_spec=$lt_cv_ar_at_file
@@ -8350,7 +8339,7 @@
 
 if test -n "$RANLIB"; then
   case $host_os in
-  openbsd*)
+  bitrig* | openbsd*)
     old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
     ;;
   *)
@@ -8440,7 +8429,7 @@
   symcode='[ABCDGISTW]'
   ;;
 hpux*)
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     symcode='[ABCDEGRST]'
   fi
   ;;
@@ -8473,14 +8462,44 @@
   symcode='[ABCDGIRSTW]' ;;
 esac
 
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  # Gets list of data symbols to import.
+  lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+  # Adjust the below global symbol transforms to fixup imported variables.
+  lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+  lt_c_name_hook=" -e 's/^I .* \(.*\)$/  {\"\1\", (void *) 0},/p'"
+  lt_c_name_lib_hook="\
+  -e 's/^I .* \(lib.*\)$/  {\"\1\", (void *) 0},/p'\
+  -e 's/^I .* \(.*\)$/  {\"lib\1\", (void *) 0},/p'"
+else
+  # Disable hooks by default.
+  lt_cv_sys_global_symbol_to_import=
+  lt_cdecl_hook=
+  lt_c_name_hook=
+  lt_c_name_lib_hook=
+fi
+
 # Transform an extracted symbol line into a proper C declaration.
 # Some systems (esp. on ia64) link data and code symbols differently,
 # so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/  {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"lib\1\", (void *) \&\1},/p'"
 
 # Handle CRLF in mingw tool chain
 opt_cr=
@@ -8498,21 +8517,24 @@
 
   # Write the raw and C identifiers.
   if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-    # Fake it for dumpbin and say T for any non-static function
-    # and D for any global variable.
+    # Fake it for dumpbin and say T for any non-static function,
+    # D for any global variable and I for any imported variable.
     # Also find C++ and __fastcall symbols from MSVC++,
     # which start with @ or ?.
     lt_cv_sys_global_symbol_pipe="$AWK '"\
 "     {last_section=section; section=\$ 3};"\
 "     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
 "     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+"     /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+"     /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
 "     \$ 0!~/External *\|/{next};"\
 "     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
 "     {if(hide[section]) next};"\
-"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
-"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+"     {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+"     s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
 "     ' prfx=^$ac_symprfx"
   else
     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
@@ -8560,11 +8582,11 @@
 	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
 	  cat <<_LT_EOF > conftest.$ac_ext
 /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
    relocations are performed -- see ld's documentation on pseudo-relocs.  */
 # define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
 /* This system does not cope well with relocations in const data.  */
 # define LT_DLSYM_CONST
 #else
@@ -8590,7 +8612,7 @@
 {
   { "@PROGRAM@", (void *) 0 },
 _LT_EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  $SED "s/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
 	  cat <<\_LT_EOF >> conftest.$ac_ext
   {0, (void *) 0}
 };
@@ -8610,13 +8632,13 @@
 	  mv conftest.$ac_objext conftstm.$ac_objext
 	  lt_globsym_save_LIBS=$LIBS
 	  lt_globsym_save_CFLAGS=$CFLAGS
-	  LIBS="conftstm.$ac_objext"
+	  LIBS=conftstm.$ac_objext
 	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
 	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
   (eval $ac_link) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+  test $ac_status = 0; } && test -s conftest$ac_exeext; then
 	    pipe_works=yes
 	  fi
 	  LIBS=$lt_globsym_save_LIBS
@@ -8637,7 +8659,7 @@
   rm -rf conftest* conftst*
 
   # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
+  if test yes = "$pipe_works"; then
     break
   else
     lt_cv_sys_global_symbol_pipe=
@@ -8690,6 +8712,16 @@
 
 
 
+
+
+
+
+
+
+
+
+
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
 $as_echo_n "checking for sysroot... " >&6; }
 
@@ -8702,9 +8734,9 @@
 
 
 lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
  yes)
-   if test "$GCC" = yes; then
+   if test yes = "$GCC"; then
      lt_sysroot=`$CC --print-sysroot 2>/dev/null`
    fi
    ;; #(
@@ -8714,8 +8746,8 @@
  no|'')
    ;; #(
  *)
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
-$as_echo "${with_sysroot}" >&6; }
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5
+$as_echo "$with_sysroot" >&6; }
    as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
    ;;
 esac
@@ -8727,18 +8759,99 @@
 
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5
+$as_echo_n "checking for a working dd... " >&6; }
+if ${ac_cv_path_lt_DD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+if test -z "$lt_DD"; then
+  ac_path_lt_DD_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in dd; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_lt_DD" || continue
+if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi
+      $ac_path_lt_DD_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_lt_DD"; then
+    :
+  fi
+else
+  ac_cv_path_lt_DD=$lt_DD
+fi
+
+rm -f conftest.i conftest2.i conftest.out
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5
+$as_echo "$ac_cv_path_lt_DD" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5
+$as_echo_n "checking how to truncate binary pipes... " >&6; }
+if ${lt_cv_truncate_bin+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5
+$as_echo "$lt_cv_truncate_bin" >&6; }
+
+
+
+
+
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+        distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
 # Check whether --enable-libtool-lock was given.
 if test "${enable_libtool_lock+set}" = set; then :
   enableval=$enable_libtool_lock;
 fi
 
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
 case $host in
 ia64-*-hpux*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set mode
+  # options accordingly.
   echo 'int i;' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
@@ -8747,24 +8860,25 @@
   test $ac_status = 0; }; then
     case `/usr/bin/file conftest.$ac_objext` in
       *ELF-32*)
-	HPUX_IA64_MODE="32"
+	HPUX_IA64_MODE=32
 	;;
       *ELF-64*)
-	HPUX_IA64_MODE="64"
+	HPUX_IA64_MODE=64
 	;;
     esac
   fi
   rm -rf conftest*
   ;;
 *-*-irix6*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
   echo '#line '$LINENO' "configure"' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-    if test "$lt_cv_prog_gnu_ld" = yes; then
+    if test yes = "$lt_cv_prog_gnu_ld"; then
       case `/usr/bin/file conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -melf32bsmip"
@@ -8793,9 +8907,50 @@
   rm -rf conftest*
   ;;
 
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+mips64*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    emul=elf
+    case `/usr/bin/file conftest.$ac_objext` in
+      *32-bit*)
+	emul="${emul}32"
+	;;
+      *64-bit*)
+	emul="${emul}64"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *MSB*)
+	emul="${emul}btsmip"
+	;;
+      *LSB*)
+	emul="${emul}ltsmip"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *N32*)
+	emul="${emul}n32"
+	;;
+    esac
+    LD="${LD-ld} -m $emul"
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
 s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.  Note that the listed cases only cover the
+  # situations where additional linker options are needed (such as when
+  # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+  # vice versa); the common cases where no linker options are needed do
+  # not appear in the list.
   echo 'int i;' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
@@ -8809,9 +8964,19 @@
 	    LD="${LD-ld} -m elf_i386_fbsd"
 	    ;;
 	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_i386"
+	    case `/usr/bin/file conftest.o` in
+	      *x86-64*)
+		LD="${LD-ld} -m elf32_x86_64"
+		;;
+	      *)
+		LD="${LD-ld} -m elf_i386"
+		;;
+	    esac
 	    ;;
-	  ppc64-*linux*|powerpc64-*linux*)
+	  powerpc64le-*linux*)
+	    LD="${LD-ld} -m elf32lppclinux"
+	    ;;
+	  powerpc64-*linux*)
 	    LD="${LD-ld} -m elf32ppclinux"
 	    ;;
 	  s390x-*linux*)
@@ -8830,7 +8995,10 @@
 	  x86_64-*linux*)
 	    LD="${LD-ld} -m elf_x86_64"
 	    ;;
-	  ppc*-*linux*|powerpc*-*linux*)
+	  powerpcle-*linux*)
+	    LD="${LD-ld} -m elf64lppc"
+	    ;;
+	  powerpc-*linux*)
 	    LD="${LD-ld} -m elf64ppc"
 	    ;;
 	  s390*-*linux*|s390*-*tpf*)
@@ -8848,7 +9016,7 @@
 
 *-*-sco3.2v5*)
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
+  SAVE_CFLAGS=$CFLAGS
   CFLAGS="$CFLAGS -belf"
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
 $as_echo_n "checking whether the C compiler needs -belf... " >&6; }
@@ -8888,13 +9056,14 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
 $as_echo "$lt_cv_cc_needs_belf" >&6; }
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+  if test yes != "$lt_cv_cc_needs_belf"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
+    CFLAGS=$SAVE_CFLAGS
   fi
   ;;
 *-*solaris*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
   echo 'int i;' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
@@ -8906,7 +9075,7 @@
       case $lt_cv_prog_gnu_ld in
       yes*)
         case $host in
-        i?86-*-solaris*)
+        i?86-*-solaris*|x86_64-*-solaris*)
           LD="${LD-ld} -m elf_x86_64"
           ;;
         sparc*-*-solaris*)
@@ -8915,7 +9084,7 @@
         esac
         # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
         if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
-          LD="${LD-ld}_sol2"
+          LD=${LD-ld}_sol2
         fi
         ;;
       *)
@@ -8931,7 +9100,7 @@
   ;;
 esac
 
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
 
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
@@ -9042,7 +9211,7 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
 $as_echo "$lt_cv_path_mainfest_tool" >&6; }
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
   MANIFEST_TOOL=:
 fi
 
@@ -9545,7 +9714,7 @@
   $as_echo_n "(cached) " >&6
 else
   lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
+      if test -z "$LT_MULTI_MODULE"; then
 	# By default we will add the -single_module flag. You can override
 	# by either setting the environment variable LT_MULTI_MODULE
 	# non-empty at configure time, or by adding -multi_module to the
@@ -9563,7 +9732,7 @@
 	  cat conftest.err >&5
 	# Otherwise, if the output was created with a 0 exit code from
 	# the compiler, it worked.
-	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
 	  lt_cv_apple_cc_single_mod=yes
 	else
 	  cat conftest.err >&5
@@ -9602,7 +9771,7 @@
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-	LDFLAGS="$save_LDFLAGS"
+	LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
@@ -9631,7 +9800,7 @@
       _lt_result=$?
       if test -s conftest.err && $GREP force_load conftest.err; then
 	cat conftest.err >&5
-      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+      elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
 	lt_cv_ld_force_load=yes
       else
 	cat conftest.err >&5
@@ -9644,32 +9813,32 @@
 $as_echo "$lt_cv_ld_force_load" >&6; }
     case $host_os in
     rhapsody* | darwin1.[012])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+      _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
     darwin1.*)
-      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+      _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
     darwin*) # darwin 5.x on
       # if running on 10.5 or later, the deployment target defaults
       # to the OS version, if on x86, and 10.4, the deployment
       # target defaults to 10.4. Don't you love it?
       case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
 	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-	10.[012]*)
-	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+	10.[012][,.]*)
+	  _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
 	10.*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
       esac
     ;;
   esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+    if test yes = "$lt_cv_apple_cc_single_mod"; then
       _lt_dar_single_mod='$single_module'
     fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    if test yes = "$lt_cv_ld_exported_symbols_list"; then
+      _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
     else
-      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
     fi
-    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+    if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
@@ -9677,6 +9846,41 @@
     ;;
   esac
 
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
 for ac_header in dlfcn.h
 do :
   ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
@@ -9694,9 +9898,9 @@
 
 func_stripname_cnf ()
 {
-  case ${2} in
-  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+  case $2 in
+  .*) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%\\\\$2\$%%"`;;
+  *)  func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%$2\$%%"`;;
   esac
 } # func_stripname_cnf
 
@@ -9721,14 +9925,14 @@
     *)
       enable_shared=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_shared=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -9752,14 +9956,14 @@
     *)
      enable_static=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_static=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -9783,14 +9987,14 @@
     *)
       pic_mode=default
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for lt_pkg in $withval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$lt_pkg" = "X$lt_p"; then
 	  pic_mode=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -9798,8 +10002,6 @@
 fi
 
 
-test -z "$pic_mode" && pic_mode=default
-
 
 
 
@@ -9815,14 +10017,14 @@
     *)
       enable_fast_install=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_fast_install=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac
 else
@@ -9836,11 +10038,63 @@
 
 
 
+  shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[5-9]*,yes)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5
+$as_echo_n "checking which variant of shared library versioning to provide... " >&6; }
+
+# Check whether --with-aix-soname was given.
+if test "${with_aix_soname+set}" = set; then :
+  withval=$with_aix_soname; case $withval in
+    aix|svr4|both)
+      ;;
+    *)
+      as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5
+      ;;
+    esac
+    lt_cv_with_aix_soname=$with_aix_soname
+else
+  if ${lt_cv_with_aix_soname+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_with_aix_soname=aix
+fi
+
+    with_aix_soname=$lt_cv_with_aix_soname
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5
+$as_echo "$with_aix_soname" >&6; }
+  if test aix != "$with_aix_soname"; then
+    # For the AIX way of multilib, we name the shared archive member
+    # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+    # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+    # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+    # the AIX toolchain works better with OBJECT_MODE set (default 32).
+    if test 64 = "${OBJECT_MODE-32}"; then
+      shared_archive_member_spec=shr_64
+    else
+      shared_archive_member_spec=shr
+    fi
+  fi
+  ;;
+*)
+  with_aix_soname=aix
+  ;;
+esac
+
+
+
+
+
+
+
 
 
 
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -9889,7 +10143,7 @@
 
 
 
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
    setopt NO_GLOB_SUBST
 fi
 
@@ -9928,7 +10182,7 @@
   # AIX sometimes has problems with the GCC collect2 program.  For some
   # reason, if we set the COLLECT_NAMES environment variable, the problems
   # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
+  if test set != "${COLLECT_NAMES+set}"; then
     COLLECT_NAMES=
     export COLLECT_NAMES
   fi
@@ -9939,14 +10193,14 @@
 ofile=libtool
 can_build_shared=yes
 
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
 
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
 
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
 
 # Set sane defaults for various variables
 test -z "$CC" && CC=cc
@@ -9955,15 +10209,8 @@
 test -z "$LD" && LD=ld
 test -z "$ac_objext" && ac_objext=o
 
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
 
 
 # Only perform the check for file, if the check method requires it
@@ -9978,22 +10225,22 @@
 else
   case $MAGIC_CMD in
 [\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
   ;;
 *)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
   for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+    if test -f "$ac_dir/${ac_tool_prefix}file"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file"
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
 	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
@@ -10016,13 +10263,13 @@
       break
     fi
   done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
   ;;
 esac
 fi
 
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 if test -n "$MAGIC_CMD"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
 $as_echo "$MAGIC_CMD" >&6; }
@@ -10044,22 +10291,22 @@
 else
   case $MAGIC_CMD in
 [\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
   ;;
 *)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
   for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+    if test -f "$ac_dir/file"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"file"
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
 	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
@@ -10082,13 +10329,13 @@
       break
     fi
   done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
   ;;
 esac
 fi
 
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 if test -n "$MAGIC_CMD"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
 $as_echo "$MAGIC_CMD" >&6; }
@@ -10109,7 +10356,7 @@
 
 # Use C for the default configuration in the libtool script
 
-lt_save_CC="$CC"
+lt_save_CC=$CC
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -10171,7 +10418,7 @@
 
 lt_prog_compiler_no_builtin_flag=
 
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   case $cc_basename in
   nvcc*)
     lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
@@ -10187,7 +10434,7 @@
   lt_cv_prog_compiler_rtti_exceptions=no
    ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   lt_compiler_flag="-fno-rtti -fno-exceptions"  ## exclude from sc_useless_quotes_in_assignment
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
@@ -10217,7 +10464,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then
     lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
 else
     :
@@ -10235,17 +10482,18 @@
 lt_prog_compiler_static=
 
 
-  if test "$GCC" = yes; then
+  if test yes = "$GCC"; then
     lt_prog_compiler_wl='-Wl,'
     lt_prog_compiler_static='-static'
 
     case $host_os in
       aix*)
       # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	lt_prog_compiler_static='-Bstatic'
       fi
+      lt_prog_compiler_pic='-fPIC'
       ;;
 
     amigaos*)
@@ -10256,8 +10504,8 @@
         ;;
       m68k)
             # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
             lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
@@ -10273,6 +10521,11 @@
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
       lt_prog_compiler_pic='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static='$wl-static'
+	;;
+      esac
       ;;
 
     darwin* | rhapsody*)
@@ -10343,7 +10596,7 @@
     case $host_os in
     aix*)
       lt_prog_compiler_wl='-Wl,'
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	lt_prog_compiler_static='-Bstatic'
       else
@@ -10351,10 +10604,29 @@
       fi
       ;;
 
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      case $cc_basename in
+      nagfor*)
+        # NAG Fortran compiler
+        lt_prog_compiler_wl='-Wl,-Wl,,'
+        lt_prog_compiler_pic='-PIC'
+        lt_prog_compiler_static='-Bstatic'
+        ;;
+      esac
+      ;;
+
     mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       lt_prog_compiler_pic='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static='$wl-static'
+	;;
+      esac
       ;;
 
     hpux9* | hpux10* | hpux11*)
@@ -10370,7 +10642,7 @@
 	;;
       esac
       # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      lt_prog_compiler_static='$wl-a ${wl}archive'
       ;;
 
     irix5* | irix6* | nonstopux*)
@@ -10379,9 +10651,9 @@
       lt_prog_compiler_static='-non_shared'
       ;;
 
-    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
       case $cc_basename in
-      # old Intel for x86_64 which still supported -KPIC.
+      # old Intel for x86_64, which still supported -KPIC.
       ecc*)
 	lt_prog_compiler_wl='-Wl,'
 	lt_prog_compiler_pic='-KPIC'
@@ -10406,6 +10678,12 @@
 	lt_prog_compiler_pic='-PIC'
 	lt_prog_compiler_static='-Bstatic'
 	;;
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+	;;
       pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
@@ -10503,7 +10781,7 @@
       ;;
 
     sysv4*MP*)
-      if test -d /usr/nec ;then
+      if test -d /usr/nec; then
 	lt_prog_compiler_pic='-Kconform_pic'
 	lt_prog_compiler_static='-Bstatic'
       fi
@@ -10532,7 +10810,7 @@
   fi
 
 case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
+  # For platforms that do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic=
     ;;
@@ -10564,7 +10842,7 @@
   lt_cv_prog_compiler_pic_works=no
    ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"  ## exclude from sc_useless_quotes_in_assignment
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
@@ -10594,7 +10872,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
 
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_pic_works"; then
     case $lt_prog_compiler_pic in
      "" | " "*) ;;
      *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
@@ -10626,7 +10904,7 @@
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_static_works=no
-   save_LDFLAGS="$LDFLAGS"
+   save_LDFLAGS=$LDFLAGS
    LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -10645,13 +10923,13 @@
      fi
    fi
    $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+   LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
 $as_echo "$lt_cv_prog_compiler_static_works" >&6; }
 
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_static_works"; then
     :
 else
     lt_prog_compiler_static=
@@ -10771,8 +11049,8 @@
 
 
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then
   # do not overwrite the value of need_locks provided by the user
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
 $as_echo_n "checking if we can lock with hard links... " >&6; }
@@ -10784,9 +11062,9 @@
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
 $as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+  if test no = "$hard_links"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
     need_locks=warn
   fi
 else
@@ -10829,9 +11107,9 @@
   # included in the symbol list
   include_expsyms=
   # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
+  # it will be wrapped by ' (' and ')$', so one must not match beginning or
+  # end of line.  Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+  # as well as any symbol that contains 'd'.
   exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
@@ -10846,7 +11124,7 @@
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
-    if test "$GCC" != yes; then
+    if test yes != "$GCC"; then
       with_gnu_ld=no
     fi
     ;;
@@ -10854,7 +11132,7 @@
     # we just hope/assume this is gcc and not c89 (= MSVC++)
     with_gnu_ld=yes
     ;;
-  openbsd*)
+  openbsd* | bitrig*)
     with_gnu_ld=no
     ;;
   esac
@@ -10864,7 +11142,7 @@
   # On some targets, GNU ld is compatible enough with the native linker
   # that we're better off using the native interface for both.
   lt_use_gnu_ld_interface=no
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     case $host_os in
       aix*)
 	# The AIX port of GNU ld has always aspired to compatibility
@@ -10886,24 +11164,24 @@
     esac
   fi
 
-  if test "$lt_use_gnu_ld_interface" = yes; then
+  if test yes = "$lt_use_gnu_ld_interface"; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
+    wlarc='$wl'
 
     # Set some defaults for GNU ld with shared library support. These
     # are reset later if shared libraries are not supported. Putting them
     # here allows them to be overridden if necessary.
     runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
+    hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+    export_dynamic_flag_spec='$wl--export-dynamic'
     # ancient GNU ld didn't support --whole-archive et. al.
     if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
     else
       whole_archive_flag_spec=
     fi
     supports_anon_versioning=no
-    case `$LD -v 2>&1` in
+    case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
       *GNU\ gold*) supports_anon_versioning=yes ;;
       *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -10916,7 +11194,7 @@
     case $host_os in
     aix[3-9]*)
       # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
+      if test ia64 != "$host_cpu"; then
 	ld_shlibs=no
 	cat <<_LT_EOF 1>&2
 
@@ -10935,7 +11213,7 @@
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
-            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
             archive_expsym_cmds=''
         ;;
       m68k)
@@ -10951,7 +11229,7 @@
 	allow_undefined_flag=unsupported
 	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
       else
 	ld_shlibs=no
       fi
@@ -10961,7 +11239,7 @@
       # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
       # as there is no search path for DLLs.
       hardcode_libdir_flag_spec='-L$libdir'
-      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      export_dynamic_flag_spec='$wl--export-all-symbols'
       allow_undefined_flag=unsupported
       always_export_symbols=no
       enable_shared_with_static_runtimes=yes
@@ -10969,61 +11247,89 @@
       exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
 
       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file, use it as
+	# is; otherwise, prepend EXPORTS...
+	archive_expsym_cmds='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+          cp $export_symbols $output_objdir/$soname.def;
+        else
+          echo EXPORTS > $output_objdir/$soname.def;
+          cat $export_symbols >> $output_objdir/$soname.def;
+        fi~
+        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
 	ld_shlibs=no
       fi
       ;;
 
     haiku*)
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
       link_all_deplibs=yes
       ;;
 
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      shrext_cmds=.dll
+      archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes=yes
+      ;;
+
     interix[3-9]*)
       hardcode_direct=no
       hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec='${wl}-E'
+      hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+      export_dynamic_flag_spec='$wl-E'
       # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
       # Instead, shared libraries are loaded at an image base (0x10000000 by
       # default) and relocated if they conflict, which is a slow very memory
       # consuming and fragmenting process.  To avoid this, we pick a random,
       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
     gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
       tmp_diet=no
-      if test "$host_os" = linux-dietlibc; then
+      if test linux-dietlibc = "$host_os"; then
 	case $cc_basename in
 	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
 	esac
       fi
       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-	 && test "$tmp_diet" = no
+	 && test no = "$tmp_diet"
       then
 	tmp_addflag=' $pic_flag'
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
 	pgf77* | pgf90* | pgf95* | pgfortran*)
 					# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
@@ -11034,42 +11340,47 @@
 	lf95*)				# Lahey Fortran 8.1
 	  whole_archive_flag_spec=
 	  tmp_sharedflag='--shared' ;;
+        nagfor*)                        # NAGFOR 5.3
+          tmp_sharedflag='-Wl,-shared' ;;
 	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
 	nvcc*)	# Cuda Compiler Driver 2.2
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  compiler_needs_object=yes
 	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  compiler_needs_object=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
 	  tmp_sharedflag='-G' ;;
 	esac
-	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
 
-        if test "x$supports_anon_versioning" = xyes; then
+        if test yes = "$supports_anon_versioning"; then
           archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	    echo "local: *; };" >> $output_objdir/$libname.ver~
-	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+            echo "local: *; };" >> $output_objdir/$libname.ver~
+            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
         fi
 
 	case $cc_basename in
+	tcc*)
+	  export_dynamic_flag_spec='-rdynamic'
+	  ;;
 	xlf* | bgf* | bgxlf* | mpixlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
-	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
 	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
-	  if test "x$supports_anon_versioning" = xyes; then
+	  if test yes = "$supports_anon_versioning"; then
 	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+              echo "local: *; };" >> $output_objdir/$libname.ver~
+              $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -11083,8 +11394,8 @@
 	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
@@ -11102,8 +11413,8 @@
 
 _LT_EOF
       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs=no
       fi
@@ -11115,7 +11426,7 @@
 	ld_shlibs=no
 	cat <<_LT_EOF 1>&2
 
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
 *** reliably create shared libraries on SCO systems.  Therefore, libtool
 *** is disabling shared libraries support.  We urge you to upgrade GNU
 *** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
@@ -11130,9 +11441,9 @@
 	  # DT_RUNPATH tag from executables and libraries.  But doing so
 	  # requires that you compile everything twice, which is a pain.
 	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	    hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	  else
 	    ld_shlibs=no
 	  fi
@@ -11149,15 +11460,15 @@
 
     *)
       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs=no
       fi
       ;;
     esac
 
-    if test "$ld_shlibs" = no; then
+    if test no = "$ld_shlibs"; then
       runpath_var=
       hardcode_libdir_flag_spec=
       export_dynamic_flag_spec=
@@ -11173,7 +11484,7 @@
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       hardcode_minus_L=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+      if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	hardcode_direct=unsupported
@@ -11181,34 +11492,57 @@
       ;;
 
     aix[4-9]*)
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
 	aix_use_runtimelinking=no
 	exp_sym_flag='-Bexport'
-	no_entry_flag=""
+	no_entry_flag=
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	# Also, AIX nm treats weak defined symbols like other global
-	# defined symbols, whereas GNU nm marks them as "W".
+	# -C means demangle to GNU nm, but means don't demangle to AIX nm.
+	# Without the "-l" option, or with the "-B" option, AIX nm treats
+	# weak defined symbols like other global defined symbols, whereas
+	# GNU nm marks them as "W".
+	# While the 'weak' keyword is ignored in the Export File, we need
+	# it in the Import File for the 'aix-soname' feature, so we have
+	# to replace the "-B" option with "-P" for AIX nm.
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
 	else
-	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
+	# have runtime linking enabled, and use it for executables.
+	# For shared libraries, we enable/disable runtime linking
+	# depending on the kind of the shared library created -
+	# when "with_aix_soname,aix_use_runtimelinking" is:
+	# "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "aix,yes"  lib.so          shared, rtl:yes, for executables
+	#            lib.a           static archive
+	# "both,no"  lib.so.V(shr.o) shared, rtl:yes
+	#            lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a(lib.so.V) shared, rtl:no
+	# "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a           static archive
 	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
 	  for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	  if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
 	    aix_use_runtimelinking=yes
 	    break
 	  fi
 	  done
+	  if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	    # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	    # so we don't have lib.a shared libs to link our executables.
+	    # We have to force runtime linking in this case.
+	    aix_use_runtimelinking=yes
+	    LDFLAGS="$LDFLAGS -Wl,-brtl"
+	  fi
 	  ;;
 	esac
 
@@ -11227,13 +11561,21 @@
       hardcode_direct_absolute=yes
       hardcode_libdir_separator=':'
       link_all_deplibs=yes
-      file_list_spec='${wl}-f,'
+      file_list_spec='$wl-f,'
+      case $with_aix_soname,$aix_use_runtimelinking in
+      aix,*) ;; # traditional, no import file
+      svr4,* | *,yes) # use import file
+	# The Import File defines what to hardcode.
+	hardcode_direct=no
+	hardcode_direct_absolute=no
+	;;
+      esac
 
-      if test "$GCC" = yes; then
+      if test yes = "$GCC"; then
 	case $host_os in aix4.[012]|aix4.[012].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
+	  collect2name=`$CC -print-prog-name=collect2`
 	  if test -f "$collect2name" &&
 	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
@@ -11252,35 +11594,42 @@
 	  ;;
 	esac
 	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
+	if test yes = "$aix_use_runtimelinking"; then
+	  shared_flag="$shared_flag "'$wl-G'
 	fi
+	# Need to ensure runtime linking is disabled for the traditional
+	# shared library, or the linker may eventually find shared libraries
+	# /with/ Import File - we do not want to mix them.
+	shared_flag_aix='-shared'
+	shared_flag_svr4='-shared $wl-G'
       else
 	# not using gcc
-	if test "$host_cpu" = ia64; then
+	if test ia64 = "$host_cpu"; then
 	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag='$wl-G'
 	  else
-	    shared_flag='${wl}-bM:SRE'
+	    shared_flag='$wl-bM:SRE'
 	  fi
+	  shared_flag_aix='$wl-bM:SRE'
+	  shared_flag_svr4='$wl-G'
 	fi
       fi
 
-      export_dynamic_flag_spec='${wl}-bexpall'
+      export_dynamic_flag_spec='$wl-bexpall'
       # It seems that -bexpall does not export symbols beginning with
       # underscore (_), so it is better to generate a list of symbols to export.
       always_export_symbols=yes
-      if test "$aix_use_runtimelinking" = yes; then
+      if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
 	# Warning - without using the other runtime loading flags (-brtl),
 	# -berok will link without error, but may produce a broken library.
 	allow_undefined_flag='-berok'
         # Determine the default libpath from the value encoded in an
         # empty executable.
-        if test "${lt_cv_aix_libpath+set}" = set; then
+        if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath_+:} false; then :
@@ -11315,7 +11664,7 @@
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath_"; then
-    lt_cv_aix_libpath_="/usr/lib:/lib"
+    lt_cv_aix_libpath_=/usr/lib:/lib
   fi
 
 fi
@@ -11323,17 +11672,17 @@
   aix_libpath=$lt_cv_aix_libpath_
 fi
 
-        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	if test ia64 = "$host_cpu"; then
+	  hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib'
 	  allow_undefined_flag="-z nodefs"
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an
 	 # empty executable.
-	 if test "${lt_cv_aix_libpath+set}" = set; then
+	 if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath_+:} false; then :
@@ -11368,7 +11717,7 @@
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath_"; then
-    lt_cv_aix_libpath_="/usr/lib:/lib"
+    lt_cv_aix_libpath_=/usr/lib:/lib
   fi
 
 fi
@@ -11376,21 +11725,33 @@
   aix_libpath=$lt_cv_aix_libpath_
 fi
 
-	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	 hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
 	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag=' ${wl}-bernotok'
-	  allow_undefined_flag=' ${wl}-berok'
-	  if test "$with_gnu_ld" = yes; then
+	  no_undefined_flag=' $wl-bernotok'
+	  allow_undefined_flag=' $wl-berok'
+	  if test yes = "$with_gnu_ld"; then
 	    # We only use this code for GNU lds that support --whole-archive.
-	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
 	  else
 	    # Exported symbols can be pulled into shared objects from archives
 	    whole_archive_flag_spec='$convenience'
 	  fi
 	  archive_cmds_need_lc=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	  # -brtl affects multiple linker settings, -berok does not and is overridden later
+	  compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+	  if test svr4 != "$with_aix_soname"; then
+	    # This is similar to how AIX traditionally builds its shared libraries.
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	  fi
+	  if test aix != "$with_aix_soname"; then
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	  else
+	    # used by -dlpreopen to get the symbols
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	  fi
+	  archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d'
 	fi
       fi
       ;;
@@ -11399,7 +11760,7 @@
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
-            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
             archive_expsym_cmds=''
         ;;
       m68k)
@@ -11429,16 +11790,17 @@
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
+	shrext_cmds=.dll
 	# FIXME: Setting linknames here is a bad hack.
-	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	  else
-	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	  fi~
-	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	  linknames='
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	archive_expsym_cmds='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+            cp "$export_symbols" "$output_objdir/$soname.def";
+            echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+          else
+            $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+          fi~
+          $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+          linknames='
 	# The linker will not automatically build a static lib if we build a DLL.
 	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
 	enable_shared_with_static_runtimes=yes
@@ -11447,18 +11809,18 @@
 	# Don't use ranlib
 	old_postinstall_cmds='chmod 644 $oldlib'
 	postlink_cmds='lt_outputfile="@OUTPUT@"~
-	  lt_tool_outputfile="@TOOL_OUTPUT@"~
-	  case $lt_outputfile in
-	    *.exe|*.EXE) ;;
-	    *)
-	      lt_outputfile="$lt_outputfile.exe"
-	      lt_tool_outputfile="$lt_tool_outputfile.exe"
-	      ;;
-	  esac~
-	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	    $RM "$lt_outputfile.manifest";
-	  fi'
+          lt_tool_outputfile="@TOOL_OUTPUT@"~
+          case $lt_outputfile in
+            *.exe|*.EXE) ;;
+            *)
+              lt_outputfile=$lt_outputfile.exe
+              lt_tool_outputfile=$lt_tool_outputfile.exe
+              ;;
+          esac~
+          if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+            $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+            $RM "$lt_outputfile.manifest";
+          fi'
 	;;
       *)
 	# Assume MSVC wrapper
@@ -11467,7 +11829,7 @@
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
+	shrext_cmds=.dll
 	# FIXME: Setting linknames here is a bad hack.
 	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
 	# The linker will automatically build a .lib file if we build a DLL.
@@ -11486,24 +11848,24 @@
   hardcode_direct=no
   hardcode_automatic=yes
   hardcode_shlibpath_var=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+  if test yes = "$lt_cv_ld_force_load"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
 
   else
     whole_archive_flag_spec=''
   fi
   link_all_deplibs=yes
-  allow_undefined_flag="$_lt_dar_allow_undefined"
+  allow_undefined_flag=$_lt_dar_allow_undefined
   case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
      *) _lt_dar_can_shared=$GCC ;;
   esac
-  if test "$_lt_dar_can_shared" = "yes"; then
+  if test yes = "$_lt_dar_can_shared"; then
     output_verbose_link_cmd=func_echo_all
-    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
 
   else
   ld_shlibs=no
@@ -11545,33 +11907,33 @@
       ;;
 
     hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      if test yes = "$GCC"; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
       else
-	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
       fi
-      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl+b $wl$libdir'
       hardcode_libdir_separator=:
       hardcode_direct=yes
 
       # hardcode_minus_L: Not really in the search PATH,
       # but as the default location of the library.
       hardcode_minus_L=yes
-      export_dynamic_flag_spec='${wl}-E'
+      export_dynamic_flag_spec='$wl-E'
       ;;
 
     hpux10*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec='$wl+b $wl$libdir'
 	hardcode_libdir_separator=:
 	hardcode_direct=yes
 	hardcode_direct_absolute=yes
-	export_dynamic_flag_spec='${wl}-E'
+	export_dynamic_flag_spec='$wl-E'
 	# hardcode_minus_L: Not really in the search PATH,
 	# but as the default location of the library.
 	hardcode_minus_L=yes
@@ -11579,25 +11941,25 @@
       ;;
 
     hpux11*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test yes,no = "$GCC,$with_gnu_ld"; then
 	case $host_cpu in
 	hppa*64*)
-	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
 	case $host_cpu in
 	hppa*64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
 
@@ -11609,7 +11971,7 @@
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler__b=no
-   save_LDFLAGS="$LDFLAGS"
+   save_LDFLAGS=$LDFLAGS
    LDFLAGS="$LDFLAGS -b"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -11628,14 +11990,14 @@
      fi
    fi
    $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+   LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
 $as_echo "$lt_cv_prog_compiler__b" >&6; }
 
-if test x"$lt_cv_prog_compiler__b" = xyes; then
-    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+if test yes = "$lt_cv_prog_compiler__b"; then
+    archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 else
     archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
 fi
@@ -11643,8 +12005,8 @@
 	  ;;
 	esac
       fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec='$wl+b $wl$libdir'
 	hardcode_libdir_separator=:
 
 	case $host_cpu in
@@ -11655,7 +12017,7 @@
 	*)
 	  hardcode_direct=yes
 	  hardcode_direct_absolute=yes
-	  export_dynamic_flag_spec='${wl}-E'
+	  export_dynamic_flag_spec='$wl-E'
 
 	  # hardcode_minus_L: Not really in the search PATH,
 	  # but as the default location of the library.
@@ -11666,8 +12028,8 @@
       ;;
 
     irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
@@ -11677,8 +12039,8 @@
 if ${lt_cv_irix_exported_symbol+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  save_LDFLAGS="$LDFLAGS"
-	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+  save_LDFLAGS=$LDFLAGS
+	   LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
 	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 int foo (void) { return 0; }
@@ -11690,24 +12052,34 @@
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-           LDFLAGS="$save_LDFLAGS"
+           LDFLAGS=$save_LDFLAGS
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
 $as_echo "$lt_cv_irix_exported_symbol" >&6; }
-	if test "$lt_cv_irix_exported_symbol" = yes; then
-          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	if test yes = "$lt_cv_irix_exported_symbol"; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
 	fi
       else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
       fi
       archive_cmds_need_lc='no'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       hardcode_libdir_separator=:
       inherit_rpath=yes
       link_all_deplibs=yes
       ;;
 
+    linux*)
+      case $cc_basename in
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	ld_shlibs=yes
+	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      esac
+      ;;
+
     netbsd*)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
@@ -11722,7 +12094,7 @@
     newsos6)
       archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
       hardcode_direct=yes
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       hardcode_libdir_separator=:
       hardcode_shlibpath_var=no
       ;;
@@ -11730,27 +12102,19 @@
     *nto* | *qnx*)
       ;;
 
-    openbsd*)
+    openbsd* | bitrig*)
       if test -f /usr/libexec/ld.so; then
 	hardcode_direct=yes
 	hardcode_shlibpath_var=no
 	hardcode_direct_absolute=yes
-	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
 	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	  export_dynamic_flag_spec='${wl}-E'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+	  export_dynamic_flag_spec='$wl-E'
 	else
-	  case $host_os in
-	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     hardcode_libdir_flag_spec='-R$libdir'
-	     ;;
-	   *)
-	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	     ;;
-	  esac
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  hardcode_libdir_flag_spec='$wl-rpath,$libdir'
 	fi
       else
 	ld_shlibs=no
@@ -11761,33 +12125,53 @@
       hardcode_libdir_flag_spec='-L$libdir'
       hardcode_minus_L=yes
       allow_undefined_flag=unsupported
-      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      shrext_cmds=.dll
+      archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes=yes
       ;;
 
     osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      if test yes = "$GCC"; then
+	allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
       fi
       archive_cmds_need_lc='no'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       hardcode_libdir_separator=:
       ;;
 
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      if test yes = "$GCC"; then
+	allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+	archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+          $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec='-rpath $libdir'
@@ -11798,24 +12182,24 @@
 
     solaris*)
       no_undefined_flag=' -z defs'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	wlarc='$wl'
+	archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+          $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
 	case `$CC -V 2>&1` in
 	*"Compilers 5.0"*)
 	  wlarc=''
-	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+            $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
 	  ;;
 	*)
-	  wlarc='${wl}'
-	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  wlarc='$wl'
+	  archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
 	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+            $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
 	  ;;
 	esac
       fi
@@ -11825,11 +12209,11 @@
       solaris2.[0-5] | solaris2.[0-5].*) ;;
       *)
 	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but understands '-z linker_flag'.  GCC discards it without '$wl',
 	# but is careful enough not to reorder.
 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	if test yes = "$GCC"; then
+	  whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
 	else
 	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
 	fi
@@ -11839,10 +12223,10 @@
       ;;
 
     sunos4*)
-      if test "x$host_vendor" = xsequent; then
+      if test sequent = "$host_vendor"; then
 	# Use $CC to link under sequent, because it throws in some extra .o
 	# files that make .init and .fini sections work.
-	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
       else
 	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
       fi
@@ -11891,43 +12275,43 @@
       ;;
 
     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag='${wl}-z,text'
+      no_undefined_flag='$wl-z,text'
       archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
       runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
     sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
+      # Note: We CANNOT use -z defs as we might desire, because we do not
       # link with -lc, and that would cause any symbols used from libc to
       # always be unresolved, which means just about no library would
       # ever link correctly.  If we're not using GNU ld we use -z text
       # though, which does catch some bad symbols but isn't as heavy-handed
       # as -z defs.
-      no_undefined_flag='${wl}-z,text'
-      allow_undefined_flag='${wl}-z,nodefs'
+      no_undefined_flag='$wl-z,text'
+      allow_undefined_flag='$wl-z,nodefs'
       archive_cmds_need_lc=no
       hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_flag_spec='$wl-R,$libdir'
       hardcode_libdir_separator=':'
       link_all_deplibs=yes
-      export_dynamic_flag_spec='${wl}-Bexport'
+      export_dynamic_flag_spec='$wl-Bexport'
       runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
@@ -11942,10 +12326,10 @@
       ;;
     esac
 
-    if test x$host_vendor = xsni; then
+    if test sni = "$host_vendor"; then
       case $host in
       sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	export_dynamic_flag_spec='$wl-Blargedynsym'
 	;;
       esac
     fi
@@ -11953,7 +12337,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
 $as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
+test no = "$ld_shlibs" && can_build_shared=no
 
 with_gnu_ld=$with_gnu_ld
 
@@ -11979,7 +12363,7 @@
   # Assume -lc should be added
   archive_cmds_need_lc=yes
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
+  if test yes,yes = "$GCC,$enable_shared"; then
     case $archive_cmds in
     *'~'*)
       # FIXME: we may have to deal with multi-command sequences.
@@ -12194,14 +12578,14 @@
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
 $as_echo_n "checking dynamic linker characteristics... " >&6; }
 
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
+    darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+    *) lt_awk_arg='/^libraries:/' ;;
   esac
   case $host_os in
-    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
-    *) lt_sed_strip_eq="s,=/,/,g" ;;
+    mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;;
+    *) lt_sed_strip_eq='s|=/|/|g' ;;
   esac
   lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
   case $lt_search_path_spec in
@@ -12217,28 +12601,35 @@
     ;;
   esac
   # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
+  # and add multilib dir if necessary...
   lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  # ...but if some path component already ends with the multilib dir we assume
+  # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+  case "$lt_multi_os_dir; $lt_search_path_spec " in
+  "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+    lt_multi_os_dir=
+    ;;
+  esac
   for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
+    if test -d "$lt_sys_path$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+    elif test -n "$lt_multi_os_dir"; then
       test -d "$lt_sys_path" && \
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
   lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+  lt_foo = "";
+  lt_count = 0;
   for (lt_i = NF; lt_i > 0; lt_i--) {
     if ($lt_i != "" && $lt_i != ".") {
       if ($lt_i == "..") {
         lt_count++;
       } else {
         if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
+          lt_foo = "/" $lt_i lt_foo;
         } else {
           lt_count--;
         }
@@ -12252,7 +12643,7 @@
   # for these hosts.
   case $host_os in
     mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
-      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+      $SED 's|/\([A-Za-z]:\)|\1|g'` ;;
   esac
   sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
 else
@@ -12261,7 +12652,7 @@
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -12278,14 +12669,16 @@
 # flags to be left without arguments
 need_version=unknown
 
+
+
 case $host_os in
 aix3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
   # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
+  soname_spec='$libname$release$shared_ext$major'
   ;;
 
 aix[4-9]*)
@@ -12293,41 +12686,91 @@
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
     shlibpath_var=LD_LIBRARY_PATH
   else
     # With GCC up to 2.95.x, collect2 would create an import file
     # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
     # development snapshots of GCC prior to 3.0.
     case $host_os in
       aix4 | aix4.[01] | aix4.[01].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
       fi
       ;;
     esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
     # soname into executable. Probably we can add versioning support to
     # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
       # If using run time linking (on AIX 4.2 or later) use lib<name>.so
       # instead of lib<name>.a to let people know that these are not
       # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a(lib.so.V)'
       # We preserve .a as extension for shared libraries through AIX4.2
       # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
     shlibpath_var=LIBPATH
   fi
   ;;
@@ -12337,18 +12780,18 @@
   powerpc)
     # Since July 2007 AmigaOS4 officially supports .so libraries.
     # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
     ;;
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
 
 beos*)
-  library_names_spec='${libname}${shared_ext}'
+  library_names_spec='$libname$shared_ext'
   dynamic_linker="$host_os ld.so"
   shlibpath_var=LIBRARY_PATH
   ;;
@@ -12356,8 +12799,8 @@
 bsdi[45]*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -12369,7 +12812,7 @@
 
 cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
-  shrext_cmds=".dll"
+  shrext_cmds=.dll
   need_version=no
   need_lib_prefix=no
 
@@ -12378,8 +12821,8 @@
     # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
@@ -12395,17 +12838,17 @@
     case $host_os in
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
 
       sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
       ;;
     esac
     dynamic_linker='Win32 ld.exe'
@@ -12414,8 +12857,8 @@
   *,cl*)
     # Native MSVC
     libname_spec='$name'
-    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-    library_names_spec='${libname}.dll.lib'
+    soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
 
     case $build_os in
     mingw*)
@@ -12442,7 +12885,7 @@
       sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
       ;;
     *)
-      sys_lib_search_path_spec="$LIB"
+      sys_lib_search_path_spec=$LIB
       if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
         # It is most probably a Windows format PATH.
         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -12455,8 +12898,8 @@
     esac
 
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname'
@@ -12469,7 +12912,7 @@
 
   *)
     # Assume MSVC wrapper
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
     dynamic_linker='Win32 ld.exe'
     ;;
   esac
@@ -12482,8 +12925,8 @@
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -12496,8 +12939,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -12515,12 +12958,13 @@
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
       need_version=no
       need_lib_prefix=no
       ;;
     freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
       need_version=yes
       ;;
   esac
@@ -12545,26 +12989,15 @@
   esac
   ;;
 
-gnu*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
 haiku*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
   sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
@@ -12582,14 +13015,15 @@
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
       sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
     else
       sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
   hppa*64*)
     shrext_cmds='.sl'
@@ -12597,8 +13031,8 @@
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
@@ -12607,8 +13041,8 @@
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     ;;
   esac
   # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -12621,8 +13055,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -12633,7 +13067,7 @@
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
     *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
+	if test yes = "$lt_cv_prog_gnu_ld"; then
 		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
@@ -12641,8 +13075,8 @@
   esac
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
   case $host_os in
   irix5* | nonstopux*)
     libsuff= shlibsuff=
@@ -12661,8 +13095,8 @@
   esac
   shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
   shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
   hardcode_into_libs=yes
   ;;
 
@@ -12671,13 +13105,33 @@
   dynamic_linker=no
   ;;
 
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  hardcode_libdir_flag_spec='-L$libdir'
+  ;;
+
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -12721,7 +13175,12 @@
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # Append ld.so.conf contents to the search path
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
   if test -f /etc/ld.so.conf; then
     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
@@ -12741,12 +13200,12 @@
   need_lib_prefix=no
   need_version=no
   if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
   shlibpath_var=LD_LIBRARY_PATH
@@ -12756,7 +13215,7 @@
 
 newsos6)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   ;;
@@ -12765,58 +13224,68 @@
   version_type=qnx
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
   dynamic_linker='ldqnx.so'
   ;;
 
-openbsd*)
+openbsd* | bitrig*)
   version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
+  sys_lib_dlsearch_path_spec=/usr/lib
   need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
+  else
+    need_version=yes
+  fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
+  shlibpath_overrides_runpath=yes
   ;;
 
 os2*)
   libname_spec='$name'
-  shrext_cmds=".dll"
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
   need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
   dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
   ;;
 
 osf3* | osf4* | osf5*)
   version_type=osf
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
   ;;
 
 rdos*)
@@ -12827,8 +13296,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
@@ -12838,11 +13307,11 @@
 
 sunos4*)
   version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
   finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     need_lib_prefix=no
   fi
   need_version=yes
@@ -12850,8 +13319,8 @@
 
 sysv4 | sysv4.3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   case $host_vendor in
     sni)
@@ -12872,24 +13341,24 @@
   ;;
 
 sysv4*MP*)
-  if test -d /usr/nec ;then
+  if test -d /usr/nec; then
     version_type=linux # correct to gnu/linux during the next big refactor
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
     shlibpath_var=LD_LIBRARY_PATH
   fi
   ;;
 
 sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
+  version_type=sco
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -12907,7 +13376,7 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
@@ -12915,8 +13384,8 @@
 
 uts4*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -12926,20 +13395,35 @@
 esac
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
 $as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
 fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
 fi
 
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
 
 
 
@@ -13036,15 +13520,15 @@
 hardcode_action=
 if test -n "$hardcode_libdir_flag_spec" ||
    test -n "$runpath_var" ||
-   test "X$hardcode_automatic" = "Xyes" ; then
+   test yes = "$hardcode_automatic"; then
 
   # We can hardcode non-existent directories.
-  if test "$hardcode_direct" != no &&
+  if test no != "$hardcode_direct" &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
-     test "$hardcode_minus_L" != no; then
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" &&
+     test no != "$hardcode_minus_L"; then
     # Linking always hardcodes the temporary library directory.
     hardcode_action=relink
   else
@@ -13059,12 +13543,12 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
 $as_echo "$hardcode_action" >&6; }
 
-if test "$hardcode_action" = relink ||
-   test "$inherit_rpath" = yes; then
+if test relink = "$hardcode_action" ||
+   test yes = "$inherit_rpath"; then
   # Fast installation is not supported
   enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
@@ -13074,7 +13558,7 @@
 
 
 
-  if test "x$enable_dlopen" != xyes; then
+  if test yes != "$enable_dlopen"; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
   enable_dlopen_self_static=unknown
@@ -13084,23 +13568,23 @@
 
   case $host_os in
   beos*)
-    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen=load_add_on
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
     ;;
 
   mingw* | pw32* | cegcc*)
-    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen=LoadLibrary
     lt_cv_dlopen_libs=
     ;;
 
   cygwin*)
-    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen=dlopen
     lt_cv_dlopen_libs=
     ;;
 
   darwin*)
-  # if libdl is installed we need to link against it
+    # if libdl is installed we need to link against it
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
 if ${ac_cv_lib_dl_dlopen+:} false; then :
@@ -13138,10 +13622,10 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
 if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
 else
 
-    lt_cv_dlopen="dyld"
+    lt_cv_dlopen=dyld
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
 
@@ -13149,10 +13633,18 @@
 
     ;;
 
+  tpf*)
+    # Don't try to run any link tests for TPF.  We know it's impossible
+    # because TPF is a cross-compiler, and we know how we open DSOs.
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=no
+    ;;
+
   *)
     ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
 if test "x$ac_cv_func_shl_load" = xyes; then :
-  lt_cv_dlopen="shl_load"
+  lt_cv_dlopen=shl_load
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
 $as_echo_n "checking for shl_load in -ldld... " >&6; }
@@ -13191,11 +13683,11 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
 $as_echo "$ac_cv_lib_dld_shl_load" >&6; }
 if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+  lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld
 else
   ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
 if test "x$ac_cv_func_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen"
+  lt_cv_dlopen=dlopen
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
@@ -13234,7 +13726,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
 if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
 $as_echo_n "checking for dlopen in -lsvld... " >&6; }
@@ -13273,7 +13765,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
 $as_echo "$ac_cv_lib_svld_dlopen" >&6; }
 if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
 $as_echo_n "checking for dld_link in -ldld... " >&6; }
@@ -13312,7 +13804,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
 $as_echo "$ac_cv_lib_dld_dld_link" >&6; }
 if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+  lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld
 fi
 
 
@@ -13333,21 +13825,21 @@
     ;;
   esac
 
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
+  if test no = "$lt_cv_dlopen"; then
     enable_dlopen=no
+  else
+    enable_dlopen=yes
   fi
 
   case $lt_cv_dlopen in
   dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+    save_CPPFLAGS=$CPPFLAGS
+    test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
-    save_LDFLAGS="$LDFLAGS"
+    save_LDFLAGS=$LDFLAGS
     wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
-    save_LIBS="$LIBS"
+    save_LIBS=$LIBS
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
@@ -13355,7 +13847,7 @@
 if ${lt_cv_dlopen_self+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  	  if test "$cross_compiling" = yes; then :
+  	  if test yes = "$cross_compiling"; then :
   lt_cv_dlopen_self=cross
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -13402,9 +13894,9 @@
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
    correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
 int fnord () __attribute__((visibility("default")));
 #endif
 
@@ -13434,7 +13926,7 @@
   (eval $ac_link) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+  test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
     (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -13454,14 +13946,14 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
 $as_echo "$lt_cv_dlopen_self" >&6; }
 
-    if test "x$lt_cv_dlopen_self" = xyes; then
+    if test yes = "$lt_cv_dlopen_self"; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
 if ${lt_cv_dlopen_self_static+:} false; then :
   $as_echo_n "(cached) " >&6
 else
-  	  if test "$cross_compiling" = yes; then :
+  	  if test yes = "$cross_compiling"; then :
   lt_cv_dlopen_self_static=cross
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -13508,9 +14000,9 @@
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
    correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
 int fnord () __attribute__((visibility("default")));
 #endif
 
@@ -13540,7 +14032,7 @@
   (eval $ac_link) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+  test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
     (./conftest; exit; ) >&5 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -13561,9 +14053,9 @@
 $as_echo "$lt_cv_dlopen_self_static" >&6; }
     fi
 
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
+    CPPFLAGS=$save_CPPFLAGS
+    LDFLAGS=$save_LDFLAGS
+    LIBS=$save_LIBS
     ;;
   esac
 
@@ -13607,7 +14099,7 @@
 # FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
   darwin*)
-    if test -n "$STRIP" ; then
+    if test -n "$STRIP"; then
       striplib="$STRIP -x"
       old_striplib="$STRIP -S"
       { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
@@ -13635,7 +14127,7 @@
 
 
 
-  # Report which library types will actually be built
+  # Report what library types will actually be built
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
 $as_echo_n "checking if libtool supports shared libraries... " >&6; }
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
@@ -13643,13 +14135,13 @@
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
 $as_echo_n "checking whether to build shared libraries... " >&6; }
-  test "$can_build_shared" = "no" && enable_shared=no
+  test no = "$can_build_shared" && enable_shared=no
 
   # On AIX, shared libraries and static libraries use the same namespace, and
   # are all built from PIC.
   case $host_os in
   aix3*)
-    test "$enable_shared" = yes && enable_static=no
+    test yes = "$enable_shared" && enable_static=no
     if test -n "$RANLIB"; then
       archive_cmds="$archive_cmds~\$RANLIB \$lib"
       postinstall_cmds='$RANLIB $lib'
@@ -13657,8 +14149,12 @@
     ;;
 
   aix[4-9]*)
-    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-      test "$enable_shared" = yes && enable_static=no
+    if test ia64 != "$host_cpu"; then
+      case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+      yes,aix,yes) ;;			# shared object as lib.so file only
+      yes,svr4,*) ;;			# shared object as lib.so archive member only
+      yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+      esac
     fi
     ;;
   esac
@@ -13668,7 +14164,7 @@
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
 $as_echo_n "checking whether to build static libraries... " >&6; }
   # Make sure either enable_shared or enable_static is yes.
-  test "$enable_shared" = yes || enable_static=yes
+  test yes = "$enable_shared" || enable_static=yes
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
 $as_echo "$enable_static" >&6; }
 
@@ -13682,11 +14178,11 @@
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-CC="$lt_save_CC"
+CC=$lt_save_CC
 
-      if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
+      if test -n "$CXX" && ( test no != "$CXX" &&
+    ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+    (test g++ != "$CXX"))); then
   ac_ext=cpp
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -13865,7 +14361,7 @@
 # the CXX compiler isn't working.  Some variables (like enable_shared)
 # are currently assumed to apply to all compilers on this platform,
 # and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
+if test yes != "$_lt_caught_CXX_error"; then
   # Code to be used in simple compile tests
   lt_simple_compile_test_code="int some_variable = 0;"
 
@@ -13926,46 +14422,39 @@
   CFLAGS=$CXXFLAGS
   compiler=$CC
   compiler_CXX=$CC
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+  func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
 
 
   if test -n "$compiler"; then
     # We don't want -fno-exception when compiling C++ code, so set the
     # no_builtin_flag separately
-    if test "$GXX" = yes; then
+    if test yes = "$GXX"; then
       lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
     else
       lt_prog_compiler_no_builtin_flag_CXX=
     fi
 
-    if test "$GXX" = yes; then
+    if test yes = "$GXX"; then
       # Set up default GNU C++ configuration
 
 
 
 # Check whether --with-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then :
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+  withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
 else
   with_gnu_ld=no
 fi
 
 ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   # Check if gcc -print-prog-name=ld gives a path.
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
 $as_echo_n "checking for ld used by $CC... " >&6; }
   case $host in
   *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
+    # gcc leaves a trailing carriage return, which upsets mingw
     ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
   *)
     ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -13979,7 +14468,7 @@
       while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
 	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
-      test -z "$LD" && LD="$ac_prog"
+      test -z "$LD" && LD=$ac_prog
       ;;
   "")
     # If it fails, then pretend we aren't using GCC.
@@ -13990,7 +14479,7 @@
     with_gnu_ld=unknown
     ;;
   esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
 $as_echo_n "checking for GNU ld... " >&6; }
 else
@@ -14001,32 +14490,32 @@
   $as_echo_n "(cached) " >&6
 else
   if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
+      lt_cv_path_LD=$ac_dir/$ac_prog
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
+	test no != "$with_gnu_ld" && break
 	;;
       *)
-	test "$with_gnu_ld" != yes && break
+	test yes != "$with_gnu_ld" && break
 	;;
       esac
     fi
   done
-  IFS="$lt_save_ifs"
+  IFS=$lt_save_ifs
 else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
 fi
 fi
 
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
 if test -n "$LD"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
 $as_echo "$LD" >&6; }
@@ -14062,22 +14551,22 @@
 
       # Check if GNU C++ uses GNU ld as the underlying linker, since the
       # archiving commands below assume that GNU ld is being used.
-      if test "$with_gnu_ld" = yes; then
-        archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      if test yes = "$with_gnu_ld"; then
+        archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+        archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 
-        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-        export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+        export_dynamic_flag_spec_CXX='$wl--export-dynamic'
 
         # If archive_cmds runs LD, not CC, wlarc should be empty
         # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
         #     investigate it a little bit more. (MM)
-        wlarc='${wl}'
+        wlarc='$wl'
 
         # ancient GNU ld didn't support --whole-archive et. al.
         if eval "`$CC -print-prog-name=ld` --help 2>&1" |
 	  $GREP 'no-whole-archive' > /dev/null; then
-          whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+          whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
         else
           whole_archive_flag_spec_CXX=
         fi
@@ -14114,18 +14603,30 @@
         ld_shlibs_CXX=no
         ;;
       aix[4-9]*)
-        if test "$host_cpu" = ia64; then
+        if test ia64 = "$host_cpu"; then
           # On IA64, the linker does run time linking by default, so we don't
           # have to do anything special.
           aix_use_runtimelinking=no
           exp_sym_flag='-Bexport'
-          no_entry_flag=""
+          no_entry_flag=
         else
           aix_use_runtimelinking=no
 
           # Test if we are trying to use run time linking or normal
           # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-          # need to do runtime linking.
+          # have runtime linking enabled, and use it for executables.
+          # For shared libraries, we enable/disable runtime linking
+          # depending on the kind of the shared library created -
+          # when "with_aix_soname,aix_use_runtimelinking" is:
+          # "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "aix,yes"  lib.so          shared, rtl:yes, for executables
+          #            lib.a           static archive
+          # "both,no"  lib.so.V(shr.o) shared, rtl:yes
+          #            lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a(lib.so.V) shared, rtl:no
+          # "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a           static archive
           case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
 	    for ld_flag in $LDFLAGS; do
 	      case $ld_flag in
@@ -14135,6 +14636,13 @@
 	        ;;
 	      esac
 	    done
+	    if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	      # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	      # so we don't have lib.a shared libs to link our executables.
+	      # We have to force runtime linking in this case.
+	      aix_use_runtimelinking=yes
+	      LDFLAGS="$LDFLAGS -Wl,-brtl"
+	    fi
 	    ;;
           esac
 
@@ -14153,13 +14661,21 @@
         hardcode_direct_absolute_CXX=yes
         hardcode_libdir_separator_CXX=':'
         link_all_deplibs_CXX=yes
-        file_list_spec_CXX='${wl}-f,'
+        file_list_spec_CXX='$wl-f,'
+        case $with_aix_soname,$aix_use_runtimelinking in
+        aix,*) ;;	# no import file
+        svr4,* | *,yes) # use import file
+          # The Import File defines what to hardcode.
+          hardcode_direct_CXX=no
+          hardcode_direct_absolute_CXX=no
+          ;;
+        esac
 
-        if test "$GXX" = yes; then
+        if test yes = "$GXX"; then
           case $host_os in aix4.[012]|aix4.[012].*)
           # We only want to do this on AIX 4.2 and lower, the check
           # below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
+	  collect2name=`$CC -print-prog-name=collect2`
 	  if test -f "$collect2name" &&
 	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
@@ -14177,36 +14693,44 @@
 	  fi
           esac
           shared_flag='-shared'
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag="$shared_flag "'${wl}-G'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag=$shared_flag' $wl-G'
 	  fi
+	  # Need to ensure runtime linking is disabled for the traditional
+	  # shared library, or the linker may eventually find shared libraries
+	  # /with/ Import File - we do not want to mix them.
+	  shared_flag_aix='-shared'
+	  shared_flag_svr4='-shared $wl-G'
         else
           # not using gcc
-          if test "$host_cpu" = ia64; then
+          if test ia64 = "$host_cpu"; then
 	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 	  # chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
           else
-	    if test "$aix_use_runtimelinking" = yes; then
-	      shared_flag='${wl}-G'
+	    if test yes = "$aix_use_runtimelinking"; then
+	      shared_flag='$wl-G'
 	    else
-	      shared_flag='${wl}-bM:SRE'
+	      shared_flag='$wl-bM:SRE'
 	    fi
+	    shared_flag_aix='$wl-bM:SRE'
+	    shared_flag_svr4='$wl-G'
           fi
         fi
 
-        export_dynamic_flag_spec_CXX='${wl}-bexpall'
+        export_dynamic_flag_spec_CXX='$wl-bexpall'
         # It seems that -bexpall does not export symbols beginning with
         # underscore (_), so it is better to generate a list of symbols to
 	# export.
         always_export_symbols_CXX=yes
-        if test "$aix_use_runtimelinking" = yes; then
+	if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
           # Warning - without using the other runtime loading flags (-brtl),
           # -berok will link without error, but may produce a broken library.
-          allow_undefined_flag_CXX='-berok'
+          # The "-G" linker flag allows undefined symbols.
+          no_undefined_flag_CXX='-bernotok'
           # Determine the default libpath from the value encoded in an empty
           # executable.
-          if test "${lt_cv_aix_libpath+set}" = set; then
+          if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath__CXX+:} false; then :
@@ -14241,7 +14765,7 @@
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath__CXX"; then
-    lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+    lt_cv_aix_libpath__CXX=/usr/lib:/lib
   fi
 
 fi
@@ -14249,18 +14773,18 @@
   aix_libpath=$lt_cv_aix_libpath__CXX
 fi
 
-          hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+          hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
 
-          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
         else
-          if test "$host_cpu" = ia64; then
-	    hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+          if test ia64 = "$host_cpu"; then
+	    hardcode_libdir_flag_spec_CXX='$wl-R $libdir:/usr/lib:/lib'
 	    allow_undefined_flag_CXX="-z nodefs"
-	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
           else
 	    # Determine the default libpath from the value encoded in an
 	    # empty executable.
-	    if test "${lt_cv_aix_libpath+set}" = set; then
+	    if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   if ${lt_cv_aix_libpath__CXX+:} false; then :
@@ -14295,7 +14819,7 @@
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
   if test -z "$lt_cv_aix_libpath__CXX"; then
-    lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+    lt_cv_aix_libpath__CXX=/usr/lib:/lib
   fi
 
 fi
@@ -14303,22 +14827,34 @@
   aix_libpath=$lt_cv_aix_libpath__CXX
 fi
 
-	    hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
 	    # Warning - without using the other run time loading flags,
 	    # -berok will link without error, but may produce a broken library.
-	    no_undefined_flag_CXX=' ${wl}-bernotok'
-	    allow_undefined_flag_CXX=' ${wl}-berok'
-	    if test "$with_gnu_ld" = yes; then
+	    no_undefined_flag_CXX=' $wl-bernotok'
+	    allow_undefined_flag_CXX=' $wl-berok'
+	    if test yes = "$with_gnu_ld"; then
 	      # We only use this code for GNU lds that support --whole-archive.
-	      whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	      whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
 	    else
 	      # Exported symbols can be pulled into shared objects from archives
 	      whole_archive_flag_spec_CXX='$convenience'
 	    fi
 	    archive_cmds_need_lc_CXX=yes
-	    # This is similar to how AIX traditionally builds its shared
-	    # libraries.
-	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	    archive_expsym_cmds_CXX='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	    # -brtl affects multiple linker settings, -berok does not and is overridden later
+	    compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+	    if test svr4 != "$with_aix_soname"; then
+	      # This is similar to how AIX traditionally builds its shared
+	      # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	    fi
+	    if test aix != "$with_aix_soname"; then
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	    else
+	      # used by -dlpreopen to get the symbols
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	    fi
+	    archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$RM -r $output_objdir/$realname.d'
           fi
         fi
         ;;
@@ -14328,7 +14864,7 @@
 	  allow_undefined_flag_CXX=unsupported
 	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	  # support --undefined.  This deserves some investigation.  FIXME
-	  archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
 	else
 	  ld_shlibs_CXX=no
 	fi
@@ -14356,57 +14892,58 @@
 	  # Tell ltmain to make .lib files, not .a files.
 	  libext=lib
 	  # Tell ltmain to make .dll files, not .so files.
-	  shrext_cmds=".dll"
+	  shrext_cmds=.dll
 	  # FIXME: Setting linknames here is a bad hack.
-	  archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	  archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	    else
-	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	    fi~
-	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	    linknames='
+	  archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	  archive_expsym_cmds_CXX='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+              cp "$export_symbols" "$output_objdir/$soname.def";
+              echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+            else
+              $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+            fi~
+            $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+            linknames='
 	  # The linker will not automatically build a static lib if we build a DLL.
 	  # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
 	  enable_shared_with_static_runtimes_CXX=yes
 	  # Don't use ranlib
 	  old_postinstall_cmds_CXX='chmod 644 $oldlib'
 	  postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
-	    lt_tool_outputfile="@TOOL_OUTPUT@"~
-	    case $lt_outputfile in
-	      *.exe|*.EXE) ;;
-	      *)
-		lt_outputfile="$lt_outputfile.exe"
-		lt_tool_outputfile="$lt_tool_outputfile.exe"
-		;;
-	    esac~
-	    func_to_tool_file "$lt_outputfile"~
-	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	      $RM "$lt_outputfile.manifest";
-	    fi'
+            lt_tool_outputfile="@TOOL_OUTPUT@"~
+            case $lt_outputfile in
+              *.exe|*.EXE) ;;
+              *)
+                lt_outputfile=$lt_outputfile.exe
+                lt_tool_outputfile=$lt_tool_outputfile.exe
+                ;;
+            esac~
+            func_to_tool_file "$lt_outputfile"~
+            if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+              $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+              $RM "$lt_outputfile.manifest";
+            fi'
 	  ;;
 	*)
 	  # g++
 	  # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
 	  # as there is no search path for DLLs.
 	  hardcode_libdir_flag_spec_CXX='-L$libdir'
-	  export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
+	  export_dynamic_flag_spec_CXX='$wl--export-all-symbols'
 	  allow_undefined_flag_CXX=unsupported
 	  always_export_symbols_CXX=no
 	  enable_shared_with_static_runtimes_CXX=yes
 
 	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	    # If the export-symbols file already is a .def file (1st line
-	    # is EXPORTS), use it as is; otherwise, prepend...
-	    archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	      cp $export_symbols $output_objdir/$soname.def;
-	    else
-	      echo EXPORTS > $output_objdir/$soname.def;
-	      cat $export_symbols >> $output_objdir/$soname.def;
-	    fi~
-	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file, use it as
+	    # is; otherwise, prepend EXPORTS...
+	    archive_expsym_cmds_CXX='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+              cp $export_symbols $output_objdir/$soname.def;
+            else
+              echo EXPORTS > $output_objdir/$soname.def;
+              cat $export_symbols >> $output_objdir/$soname.def;
+            fi~
+            $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	  else
 	    ld_shlibs_CXX=no
 	  fi
@@ -14420,27 +14957,27 @@
   hardcode_direct_CXX=no
   hardcode_automatic_CXX=yes
   hardcode_shlibpath_var_CXX=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+  if test yes = "$lt_cv_ld_force_load"; then
+    whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
 
   else
     whole_archive_flag_spec_CXX=''
   fi
   link_all_deplibs_CXX=yes
-  allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
+  allow_undefined_flag_CXX=$_lt_dar_allow_undefined
   case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
      *) _lt_dar_can_shared=$GCC ;;
   esac
-  if test "$_lt_dar_can_shared" = "yes"; then
+  if test yes = "$_lt_dar_can_shared"; then
     output_verbose_link_cmd=func_echo_all
-    archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-       if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-      archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-      archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds_CXX="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+       if test yes != "$lt_cv_apple_cc_single_mod"; then
+      archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+      archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
     fi
 
   else
@@ -14449,6 +14986,34 @@
 
 	;;
 
+      os2*)
+	hardcode_libdir_flag_spec_CXX='-L$libdir'
+	hardcode_minus_L_CXX=yes
+	allow_undefined_flag_CXX=unsupported
+	shrext_cmds=.dll
+	archive_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	archive_expsym_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  prefix_cmds="$SED"~
+	  if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	    prefix_cmds="$prefix_cmds -e 1d";
+	  fi~
+	  prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	  cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	old_archive_From_new_cmds_CXX='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+	enable_shared_with_static_runtimes_CXX=yes
+	;;
+
       dgux*)
         case $cc_basename in
           ec++*)
@@ -14483,18 +15048,15 @@
         ld_shlibs_CXX=yes
         ;;
 
-      gnu*)
-        ;;
-
       haiku*)
-        archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
         link_all_deplibs_CXX=yes
         ;;
 
       hpux9*)
-        hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+        hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
         hardcode_libdir_separator_CXX=:
-        export_dynamic_flag_spec_CXX='${wl}-E'
+        export_dynamic_flag_spec_CXX='$wl-E'
         hardcode_direct_CXX=yes
         hardcode_minus_L_CXX=yes # Not in the search PATH,
 				             # but as the default
@@ -14506,7 +15068,7 @@
             ld_shlibs_CXX=no
             ;;
           aCC*)
-            archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
             # Commands to make compiler produce verbose output that lists
             # what "hidden" libraries, object files and flags are used when
             # linking a shared library.
@@ -14515,11 +15077,11 @@
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
             ;;
           *)
-            if test "$GXX" = yes; then
-              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            if test yes = "$GXX"; then
+              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
             else
               # FIXME: insert proper C++ library support
               ld_shlibs_CXX=no
@@ -14529,15 +15091,15 @@
         ;;
 
       hpux10*|hpux11*)
-        if test $with_gnu_ld = no; then
-	  hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+        if test no = "$with_gnu_ld"; then
+	  hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
 	  hardcode_libdir_separator_CXX=:
 
           case $host_cpu in
             hppa*64*|ia64*)
               ;;
             *)
-	      export_dynamic_flag_spec_CXX='${wl}-E'
+	      export_dynamic_flag_spec_CXX='$wl-E'
               ;;
           esac
         fi
@@ -14563,13 +15125,13 @@
           aCC*)
 	    case $host_cpu in
 	      hppa*64*)
-	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	      ia64*)
-	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	      *)
-	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	    esac
 	    # Commands to make compiler produce verbose output that lists
@@ -14580,20 +15142,20 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
           *)
-	    if test "$GXX" = yes; then
-	      if test $with_gnu_ld = no; then
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
 	        case $host_cpu in
 	          hppa*64*)
-	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          ia64*)
-	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          *)
-	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	        esac
 	      fi
@@ -14608,22 +15170,22 @@
       interix[3-9]*)
 	hardcode_direct_CXX=no
 	hardcode_shlibpath_var_CXX=no
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_CXX='${wl}-E'
+	hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	export_dynamic_flag_spec_CXX='$wl-E'
 	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
 	# Instead, shared libraries are loaded at an image base (0x10000000 by
 	# default) and relocated if they conflict, which is a slow very memory
 	# consuming and fragmenting process.  To avoid this, we pick a random,
 	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
 	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-	archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-	archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	archive_expsym_cmds_CXX='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
 	;;
       irix5* | irix6*)
         case $cc_basename in
           CC*)
 	    # SGI C++
-	    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
@@ -14632,22 +15194,22 @@
 	    old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
 	    ;;
           *)
-	    if test "$GXX" = yes; then
-	      if test "$with_gnu_ld" = no; then
-	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 	      else
-	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
 	      fi
 	    fi
 	    link_all_deplibs_CXX=yes
 	    ;;
         esac
-        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
         hardcode_libdir_separator_CXX=:
         inherit_rpath_CXX=yes
         ;;
 
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
         case $cc_basename in
           KCC*)
 	    # Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -14655,8 +15217,8 @@
 	    # KCC will only create a shared library if the output file
 	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
 	    # to its proper name (with version) after linking.
-	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	    archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
 	    # Commands to make compiler produce verbose output that lists
 	    # what "hidden" libraries, object files and flags are used when
 	    # linking a shared library.
@@ -14665,10 +15227,10 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 
-	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
@@ -14682,59 +15244,59 @@
 	    # earlier do not add the objects themselves.
 	    case `$CC -V 2>&1` in
 	      *"Version 7."*)
-	        archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	        archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 		;;
 	      *)  # Version 8.0 or newer
 	        tmp_idyn=
 	        case $host_cpu in
 		  ia64*) tmp_idyn=' -i_dynamic';;
 		esac
-	        archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	        archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 		;;
 	    esac
 	    archive_cmds_need_lc_CXX=no
-	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	    whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
 	    ;;
           pgCC* | pgcpp*)
             # Portland Group C++ compiler
 	    case `$CC -V` in
 	    *pgCC\ [1-5].* | *pgcpp\ [1-5].*)
 	      prelink_cmds_CXX='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+               rm -rf $tpldir~
+               $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+               compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
 	      old_archive_cmds_CXX='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
-		$RANLIB $oldlib'
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+                $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+                $RANLIB $oldlib'
 	      archive_cmds_CXX='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
 	      archive_expsym_cmds_CXX='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	      ;;
 	    *) # Version 6 and above use weak symbols
-	      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-	      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	      ;;
 	    esac
 
-	    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	    whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	    hardcode_libdir_flag_spec_CXX='$wl--rpath $wl$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    whole_archive_flag_spec_CXX='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
             ;;
 	  cxx*)
 	    # Compaq C++
-	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname  -o $lib $wl-retain-symbols-file $wl$export_symbols'
 
 	    runpath_var=LD_RUN_PATH
 	    hardcode_libdir_flag_spec_CXX='-rpath $libdir'
@@ -14748,18 +15310,18 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
 	    ;;
 	  xl* | mpixl* | bgxl*)
 	    # IBM XL 8.0 on PPC, with GNU ld
-	    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	    archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    if test "x$supports_anon_versioning" = xyes; then
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    if test yes = "$supports_anon_versioning"; then
 	      archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
-		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-		echo "local: *; };" >> $output_objdir/$libname.ver~
-		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+                cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+                echo "local: *; };" >> $output_objdir/$libname.ver~
+                $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
 	    fi
 	    ;;
 	  *)
@@ -14767,10 +15329,10 @@
 	    *Sun\ C*)
 	      # Sun C++ 5.9
 	      no_undefined_flag_CXX=' -zdefs'
-	      archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      archive_expsym_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
 	      hardcode_libdir_flag_spec_CXX='-R$libdir'
-	      whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	      whole_archive_flag_spec_CXX='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	      compiler_needs_object_CXX=yes
 
 	      # Not sure whether something based on
@@ -14828,22 +15390,17 @@
         ld_shlibs_CXX=yes
 	;;
 
-      openbsd2*)
-        # C++ shared libraries are fairly broken
-	ld_shlibs_CXX=no
-	;;
-
-      openbsd*)
+      openbsd* | bitrig*)
 	if test -f /usr/libexec/ld.so; then
 	  hardcode_direct_CXX=yes
 	  hardcode_shlibpath_var_CXX=no
 	  hardcode_direct_absolute_CXX=yes
 	  archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-	  hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	    archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-	    export_dynamic_flag_spec_CXX='${wl}-E'
-	    whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+	    archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+	    export_dynamic_flag_spec_CXX='$wl-E'
+	    whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
 	  fi
 	  output_verbose_link_cmd=func_echo_all
 	else
@@ -14859,9 +15416,9 @@
 	    # KCC will only create a shared library if the output file
 	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
 	    # to its proper name (with version) after linking.
-	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
 
-	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
 	    hardcode_libdir_separator_CXX=:
 
 	    # Archives containing C++ object files must be created using
@@ -14879,17 +15436,17 @@
           cxx*)
 	    case $host in
 	      osf3*)
-	        allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	        allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
+	        archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
 		;;
 	      *)
 	        allow_undefined_flag_CXX=' -expect_unresolved \*'
-	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 	        archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	          echo "-hidden">> $lib.exp~
-	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
-	          $RM $lib.exp'
+                  echo "-hidden">> $lib.exp~
+                  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+                  $RM $lib.exp'
 	        hardcode_libdir_flag_spec_CXX='-rpath $libdir'
 		;;
 	    esac
@@ -14904,21 +15461,21 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
 	  *)
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
 	      case $host in
 	        osf3*)
-	          archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          archive_cmds_CXX='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 		  ;;
 	        *)
-	          archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 		  ;;
 	      esac
 
-	      hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	      hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
 	      hardcode_libdir_separator_CXX=:
 
 	      # Commands to make compiler produce verbose output that lists
@@ -14964,9 +15521,9 @@
 	    # Sun C++ 4.2, 5.x and Centerline C++
             archive_cmds_need_lc_CXX=yes
 	    no_undefined_flag_CXX=' -zdefs'
-	    archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	    archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+              $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	    hardcode_libdir_flag_spec_CXX='-R$libdir'
 	    hardcode_shlibpath_var_CXX=no
@@ -14974,7 +15531,7 @@
 	      solaris2.[0-5] | solaris2.[0-5].*) ;;
 	      *)
 		# The compiler driver will combine and reorder linker options,
-		# but understands `-z linker_flag'.
+		# but understands '-z linker_flag'.
 	        # Supported since Solaris 2.6 (maybe 2.5.1?)
 		whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
 	        ;;
@@ -14991,30 +15548,30 @@
 	    ;;
           gcx*)
 	    # Green Hills C++ Compiler
-	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
 
 	    # The C++ compiler must be used to create the archive.
 	    old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
 	    ;;
           *)
 	    # GNU C++ compiler with Solaris linker
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      no_undefined_flag_CXX=' $wl-z ${wl}defs'
 	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
 	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+                  $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
 	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      else
-	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # g++ 2.7 appears to require '-G' NOT '-shared' on this
 	        # platform.
-	        archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        archive_cmds_CXX='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
 	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+                  $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
@@ -15022,11 +15579,11 @@
 	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      fi
 
-	      hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+	      hardcode_libdir_flag_spec_CXX='$wl-R $wl$libdir'
 	      case $host_os in
 		solaris2.[0-5] | solaris2.[0-5].*) ;;
 		*)
-		  whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  whole_archive_flag_spec_CXX='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
 		  ;;
 	      esac
 	    fi
@@ -15035,52 +15592,52 @@
         ;;
 
     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag_CXX='${wl}-z,text'
+      no_undefined_flag_CXX='$wl-z,text'
       archive_cmds_need_lc_CXX=no
       hardcode_shlibpath_var_CXX=no
       runpath_var='LD_RUN_PATH'
 
       case $cc_basename in
         CC*)
-	  archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
       esac
       ;;
 
       sysv5* | sco3.2v5* | sco5v6*)
-	# Note: We can NOT use -z defs as we might desire, because we do not
+	# Note: We CANNOT use -z defs as we might desire, because we do not
 	# link with -lc, and that would cause any symbols used from libc to
 	# always be unresolved, which means just about no library would
 	# ever link correctly.  If we're not using GNU ld we use -z text
 	# though, which does catch some bad symbols but isn't as heavy-handed
 	# as -z defs.
-	no_undefined_flag_CXX='${wl}-z,text'
-	allow_undefined_flag_CXX='${wl}-z,nodefs'
+	no_undefined_flag_CXX='$wl-z,text'
+	allow_undefined_flag_CXX='$wl-z,nodefs'
 	archive_cmds_need_lc_CXX=no
 	hardcode_shlibpath_var_CXX=no
-	hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir'
+	hardcode_libdir_flag_spec_CXX='$wl-R,$libdir'
 	hardcode_libdir_separator_CXX=':'
 	link_all_deplibs_CXX=yes
-	export_dynamic_flag_spec_CXX='${wl}-Bexport'
+	export_dynamic_flag_spec_CXX='$wl-Bexport'
 	runpath_var='LD_RUN_PATH'
 
 	case $cc_basename in
           CC*)
-	    archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
-	      '"$old_archive_cmds_CXX"
+              '"$old_archive_cmds_CXX"
 	    reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
-	      '"$reload_cmds_CXX"
+              '"$reload_cmds_CXX"
 	    ;;
 	  *)
-	    archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    ;;
 	esac
       ;;
@@ -15112,10 +15669,10 @@
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
 $as_echo "$ld_shlibs_CXX" >&6; }
-    test "$ld_shlibs_CXX" = no && can_build_shared=no
+    test no = "$ld_shlibs_CXX" && can_build_shared=no
 
-    GCC_CXX="$GXX"
-    LD_CXX="$LD"
+    GCC_CXX=$GXX
+    LD_CXX=$LD
 
     ## CAVEAT EMPTOR:
     ## There is no encapsulation within the following macros, do not change
@@ -15159,13 +15716,13 @@
   pre_test_object_deps_done=no
 
   for p in `eval "$output_verbose_link_cmd"`; do
-    case ${prev}${p} in
+    case $prev$p in
 
     -L* | -R* | -l*)
        # Some compilers place space between "-{L,R}" and the path.
        # Remove the space.
-       if test $p = "-L" ||
-          test $p = "-R"; then
+       if test x-L = "$p" ||
+          test x-R = "$p"; then
 	 prev=$p
 	 continue
        fi
@@ -15181,16 +15738,16 @@
        case $p in
        =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
        esac
-       if test "$pre_test_object_deps_done" = no; then
-	 case ${prev} in
+       if test no = "$pre_test_object_deps_done"; then
+	 case $prev in
 	 -L | -R)
 	   # Internal compiler library paths should come after those
 	   # provided the user.  The postdeps already come after the
 	   # user supplied libs so there is no need to process them.
 	   if test -z "$compiler_lib_search_path_CXX"; then
-	     compiler_lib_search_path_CXX="${prev}${p}"
+	     compiler_lib_search_path_CXX=$prev$p
 	   else
-	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} $prev$p"
 	   fi
 	   ;;
 	 # The "-l" case would never come before the object being
@@ -15198,9 +15755,9 @@
 	 esac
        else
 	 if test -z "$postdeps_CXX"; then
-	   postdeps_CXX="${prev}${p}"
+	   postdeps_CXX=$prev$p
 	 else
-	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+	   postdeps_CXX="${postdeps_CXX} $prev$p"
 	 fi
        fi
        prev=
@@ -15215,15 +15772,15 @@
 	 continue
        fi
 
-       if test "$pre_test_object_deps_done" = no; then
+       if test no = "$pre_test_object_deps_done"; then
 	 if test -z "$predep_objects_CXX"; then
-	   predep_objects_CXX="$p"
+	   predep_objects_CXX=$p
 	 else
 	   predep_objects_CXX="$predep_objects_CXX $p"
 	 fi
        else
 	 if test -z "$postdep_objects_CXX"; then
-	   postdep_objects_CXX="$p"
+	   postdep_objects_CXX=$p
 	 else
 	   postdep_objects_CXX="$postdep_objects_CXX $p"
 	 fi
@@ -15253,51 +15810,6 @@
   postdep_objects_CXX=
   postdeps_CXX=
   ;;
-
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    if test "$solaris_use_stlport4" != yes; then
-      postdeps_CXX='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC* | sunCC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      postdeps_CXX='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
 esac
 
 
@@ -15306,7 +15818,7 @@
 esac
  compiler_lib_search_dirs_CXX=
 if test -n "${compiler_lib_search_path_CXX}"; then
- compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | $SED -e 's! -L! !g' -e 's!^ !!'`
 fi
 
 
@@ -15345,17 +15857,18 @@
 
 
   # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
+  if test yes = "$GXX"; then
     lt_prog_compiler_wl_CXX='-Wl,'
     lt_prog_compiler_static_CXX='-static'
 
     case $host_os in
     aix*)
       # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	lt_prog_compiler_static_CXX='-Bstatic'
       fi
+      lt_prog_compiler_pic_CXX='-fPIC'
       ;;
 
     amigaos*)
@@ -15366,8 +15879,8 @@
         ;;
       m68k)
             # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
             lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
@@ -15382,6 +15895,11 @@
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
       lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static_CXX='$wl-static'
+	;;
+      esac
       ;;
     darwin* | rhapsody*)
       # PIC is the default on this platform
@@ -15431,7 +15949,7 @@
     case $host_os in
       aix[4-9]*)
 	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
+	if test ia64 = "$host_cpu"; then
 	  # AIX 5 now supports IA64 processor
 	  lt_prog_compiler_static_CXX='-Bstatic'
 	else
@@ -15471,14 +15989,14 @@
 	case $cc_basename in
 	  CC*)
 	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
+	    lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
+	    if test ia64 != "$host_cpu"; then
 	      lt_prog_compiler_pic_CXX='+Z'
 	    fi
 	    ;;
 	  aCC*)
 	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
 	    case $host_cpu in
 	    hppa*64*|ia64*)
 	      # +Z the default
@@ -15507,7 +16025,7 @@
 	    ;;
 	esac
 	;;
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
 	case $cc_basename in
 	  KCC*)
 	    # KAI C++ Compiler
@@ -15515,7 +16033,7 @@
 	    lt_prog_compiler_pic_CXX='-fPIC'
 	    ;;
 	  ecpc* )
-	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    # old Intel C++ for x86_64, which still supported -KPIC.
 	    lt_prog_compiler_wl_CXX='-Wl,'
 	    lt_prog_compiler_pic_CXX='-KPIC'
 	    lt_prog_compiler_static_CXX='-static'
@@ -15660,7 +16178,7 @@
   fi
 
 case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
+  # For platforms that do not support PIC, -DPIC is meaningless:
   *djgpp*)
     lt_prog_compiler_pic_CXX=
     ;;
@@ -15692,7 +16210,7 @@
   lt_cv_prog_compiler_pic_works_CXX=no
    ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"  ## exclude from sc_useless_quotes_in_assignment
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
@@ -15722,7 +16240,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
 $as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
 
-if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
+if test yes = "$lt_cv_prog_compiler_pic_works_CXX"; then
     case $lt_prog_compiler_pic_CXX in
      "" | " "*) ;;
      *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
@@ -15748,7 +16266,7 @@
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_static_works_CXX=no
-   save_LDFLAGS="$LDFLAGS"
+   save_LDFLAGS=$LDFLAGS
    LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -15767,13 +16285,13 @@
      fi
    fi
    $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+   LDFLAGS=$save_LDFLAGS
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
 $as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
 
-if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
+if test yes = "$lt_cv_prog_compiler_static_works_CXX"; then
     :
 else
     lt_prog_compiler_static_CXX=
@@ -15887,8 +16405,8 @@
 
 
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o_CXX" && test no != "$need_locks"; then
   # do not overwrite the value of need_locks provided by the user
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
 $as_echo_n "checking if we can lock with hard links... " >&6; }
@@ -15900,9 +16418,9 @@
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
 $as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+  if test no = "$hard_links"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
     need_locks=warn
   fi
 else
@@ -15919,17 +16437,21 @@
   case $host_os in
   aix[4-9]*)
     # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    # Also, AIX nm treats weak defined symbols like other global defined
-    # symbols, whereas GNU nm marks them as "W".
+    # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+    # Without the "-l" option, or with the "-B" option, AIX nm treats
+    # weak defined symbols like other global defined symbols, whereas
+    # GNU nm marks them as "W".
+    # While the 'weak' keyword is ignored in the Export File, we need
+    # it in the Import File for the 'aix-soname' feature, so we have
+    # to replace the "-B" option with "-P" for AIX nm.
     if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
     else
-      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      export_symbols_cmds_CXX='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
     fi
     ;;
   pw32*)
-    export_symbols_cmds_CXX="$ltdll_cmds"
+    export_symbols_cmds_CXX=$ltdll_cmds
     ;;
   cygwin* | mingw* | cegcc*)
     case $cc_basename in
@@ -15949,7 +16471,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
 $as_echo "$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
+test no = "$ld_shlibs_CXX" && can_build_shared=no
 
 with_gnu_ld_CXX=$with_gnu_ld
 
@@ -15966,7 +16488,7 @@
   # Assume -lc should be added
   archive_cmds_need_lc_CXX=yes
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
+  if test yes,yes = "$GCC,$enable_shared"; then
     case $archive_cmds_CXX in
     *'~'*)
       # FIXME: we may have to deal with multi-command sequences.
@@ -16094,7 +16616,7 @@
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -16111,14 +16633,16 @@
 # flags to be left without arguments
 need_version=unknown
 
+
+
 case $host_os in
 aix3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
   # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
+  soname_spec='$libname$release$shared_ext$major'
   ;;
 
 aix[4-9]*)
@@ -16126,41 +16650,91 @@
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
     shlibpath_var=LD_LIBRARY_PATH
   else
     # With GCC up to 2.95.x, collect2 would create an import file
     # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
     # development snapshots of GCC prior to 3.0.
     case $host_os in
       aix4 | aix4.[01] | aix4.[01].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
       fi
       ;;
     esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
     # soname into executable. Probably we can add versioning support to
     # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
       # If using run time linking (on AIX 4.2 or later) use lib<name>.so
       # instead of lib<name>.a to let people know that these are not
       # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a(lib.so.V)'
       # We preserve .a as extension for shared libraries through AIX4.2
       # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
     shlibpath_var=LIBPATH
   fi
   ;;
@@ -16170,18 +16744,18 @@
   powerpc)
     # Since July 2007 AmigaOS4 officially supports .so libraries.
     # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
     ;;
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
 
 beos*)
-  library_names_spec='${libname}${shared_ext}'
+  library_names_spec='$libname$shared_ext'
   dynamic_linker="$host_os ld.so"
   shlibpath_var=LIBRARY_PATH
   ;;
@@ -16189,8 +16763,8 @@
 bsdi[45]*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -16202,7 +16776,7 @@
 
 cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
-  shrext_cmds=".dll"
+  shrext_cmds=.dll
   need_version=no
   need_lib_prefix=no
 
@@ -16211,8 +16785,8 @@
     # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
@@ -16228,16 +16802,16 @@
     case $host_os in
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
 
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
       ;;
     esac
     dynamic_linker='Win32 ld.exe'
@@ -16246,8 +16820,8 @@
   *,cl*)
     # Native MSVC
     libname_spec='$name'
-    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-    library_names_spec='${libname}.dll.lib'
+    soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
 
     case $build_os in
     mingw*)
@@ -16274,7 +16848,7 @@
       sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
       ;;
     *)
-      sys_lib_search_path_spec="$LIB"
+      sys_lib_search_path_spec=$LIB
       if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
         # It is most probably a Windows format PATH.
         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -16287,8 +16861,8 @@
     esac
 
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname'
@@ -16301,7 +16875,7 @@
 
   *)
     # Assume MSVC wrapper
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
     dynamic_linker='Win32 ld.exe'
     ;;
   esac
@@ -16314,8 +16888,8 @@
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -16327,8 +16901,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -16346,12 +16920,13 @@
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
       need_version=no
       need_lib_prefix=no
       ;;
     freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
       need_version=yes
       ;;
   esac
@@ -16376,26 +16951,15 @@
   esac
   ;;
 
-gnu*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
 haiku*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
   sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
@@ -16413,14 +16977,15 @@
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
       sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
     else
       sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
   hppa*64*)
     shrext_cmds='.sl'
@@ -16428,8 +16993,8 @@
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
@@ -16438,8 +17003,8 @@
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     ;;
   esac
   # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -16452,8 +17017,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -16464,7 +17029,7 @@
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
     *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
+	if test yes = "$lt_cv_prog_gnu_ld"; then
 		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
@@ -16472,8 +17037,8 @@
   esac
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
   case $host_os in
   irix5* | nonstopux*)
     libsuff= shlibsuff=
@@ -16492,8 +17057,8 @@
   esac
   shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
   shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
   hardcode_into_libs=yes
   ;;
 
@@ -16502,13 +17067,33 @@
   dynamic_linker=no
   ;;
 
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  hardcode_libdir_flag_spec_CXX='-L$libdir'
+  ;;
+
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -16552,7 +17137,12 @@
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # Append ld.so.conf contents to the search path
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
   if test -f /etc/ld.so.conf; then
     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
@@ -16572,12 +17162,12 @@
   need_lib_prefix=no
   need_version=no
   if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
   shlibpath_var=LD_LIBRARY_PATH
@@ -16587,7 +17177,7 @@
 
 newsos6)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   ;;
@@ -16596,58 +17186,68 @@
   version_type=qnx
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
   dynamic_linker='ldqnx.so'
   ;;
 
-openbsd*)
+openbsd* | bitrig*)
   version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
+  sys_lib_dlsearch_path_spec=/usr/lib
   need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
+  else
+    need_version=yes
+  fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
+  shlibpath_overrides_runpath=yes
   ;;
 
 os2*)
   libname_spec='$name'
-  shrext_cmds=".dll"
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
   need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
   dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
   ;;
 
 osf3* | osf4* | osf5*)
   version_type=osf
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
   ;;
 
 rdos*)
@@ -16658,8 +17258,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
@@ -16669,11 +17269,11 @@
 
 sunos4*)
   version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
   finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     need_lib_prefix=no
   fi
   need_version=yes
@@ -16681,8 +17281,8 @@
 
 sysv4 | sysv4.3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   case $host_vendor in
     sni)
@@ -16703,24 +17303,24 @@
   ;;
 
 sysv4*MP*)
-  if test -d /usr/nec ;then
+  if test -d /usr/nec; then
     version_type=linux # correct to gnu/linux during the next big refactor
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
     shlibpath_var=LD_LIBRARY_PATH
   fi
   ;;
 
 sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
+  version_type=sco
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -16738,7 +17338,7 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
@@ -16746,8 +17346,8 @@
 
 uts4*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -16757,20 +17357,32 @@
 esac
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
 $as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
 fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
 fi
 
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
 
 
 
@@ -16813,15 +17425,15 @@
 hardcode_action_CXX=
 if test -n "$hardcode_libdir_flag_spec_CXX" ||
    test -n "$runpath_var_CXX" ||
-   test "X$hardcode_automatic_CXX" = "Xyes" ; then
+   test yes = "$hardcode_automatic_CXX"; then
 
   # We can hardcode non-existent directories.
-  if test "$hardcode_direct_CXX" != no &&
+  if test no != "$hardcode_direct_CXX" &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
-     test "$hardcode_minus_L_CXX" != no; then
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" &&
+     test no != "$hardcode_minus_L_CXX"; then
     # Linking always hardcodes the temporary library directory.
     hardcode_action_CXX=relink
   else
@@ -16836,12 +17448,12 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
 $as_echo "$hardcode_action_CXX" >&6; }
 
-if test "$hardcode_action_CXX" = relink ||
-   test "$inherit_rpath_CXX" = yes; then
+if test relink = "$hardcode_action_CXX" ||
+   test yes = "$inherit_rpath_CXX"; then
   # Fast installation is not supported
   enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
@@ -16864,7 +17476,7 @@
   lt_cv_path_LD=$lt_save_path_LD
   lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
   lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
+fi # test yes != "$_lt_caught_CXX_error"
 
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -17022,9 +17634,9 @@
 # Versioning
 
 PCRE_MAJOR="8"
-PCRE_MINOR="36"
+PCRE_MINOR="37"
 PCRE_PRERELEASE=""
-PCRE_DATE="2014-09-26"
+PCRE_DATE="2015-04-28"
 
 if test "$PCRE_MINOR" = "08" -o "$PCRE_MINOR" = "09"
 then
@@ -19046,13 +19658,13 @@
 # (Note: The libpcre*_version bits are m4 variables, assigned above)
 
 EXTRA_LIBPCRE_LDFLAGS="$EXTRA_LIBPCRE_LDFLAGS \
-                       $NO_UNDEFINED -version-info 3:4:2"
+                       $NO_UNDEFINED -version-info 3:5:2"
 
 EXTRA_LIBPCRE16_LDFLAGS="$EXTRA_LIBPCRE16_LDFLAGS \
-                       $NO_UNDEFINED -version-info 2:4:2"
+                       $NO_UNDEFINED -version-info 2:5:2"
 
 EXTRA_LIBPCRE32_LDFLAGS="$EXTRA_LIBPCRE32_LDFLAGS \
-                       $NO_UNDEFINED -version-info 0:4:0"
+                       $NO_UNDEFINED -version-info 0:5:0"
 
 EXTRA_LIBPCREPOSIX_LDFLAGS="$EXTRA_LIBPCREPOSIX_LDFLAGS \
                             $NO_UNDEFINED -version-info 0:3:0"
@@ -20107,7 +20719,7 @@
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by PCRE $as_me 8.36, which was
+This file was extended by PCRE $as_me 8.37, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -20173,7 +20785,7 @@
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-PCRE config.status 8.36
+PCRE config.status 8.37
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 
@@ -20311,6 +20923,7 @@
 enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
 pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
 enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
 SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
 ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
 PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
@@ -20358,10 +20971,13 @@
 GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
 nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
 lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
 objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
 MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
 lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
@@ -20426,7 +21042,8 @@
 finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
 hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
 sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
 hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
 enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
 enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
@@ -20532,9 +21149,12 @@
 compiler \
 lt_cv_sys_global_symbol_pipe \
 lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
 lt_cv_sys_global_symbol_to_c_name_address \
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+lt_cv_nm_interface \
 nm_file_list_spec \
+lt_cv_truncate_bin \
 lt_prog_compiler_no_builtin_flag \
 lt_prog_compiler_pic \
 lt_prog_compiler_wl \
@@ -20600,7 +21220,7 @@
 compiler_lib_search_path_CXX; do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -20627,7 +21247,8 @@
 postuninstall_cmds \
 finish_cmds \
 sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec \
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path \
 reload_cmds_CXX \
 old_archive_cmds_CXX \
 old_archive_from_new_cmds_CXX \
@@ -20641,7 +21262,7 @@
 postlink_cmds_CXX; do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -20650,19 +21271,16 @@
 done
 
 ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
 
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
 # commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
    setopt NO_GLOB_SUBST
 fi
 
 
     PACKAGE='$PACKAGE'
     VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
     RM='$RM'
     ofile='$ofile'
 
@@ -21384,55 +22002,53 @@
  ;;
     "libtool":C)
 
-    # See if we are running on zsh, and set the options which allow our
+    # See if we are running on zsh, and set the options that allow our
     # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
+    if test -n "${ZSH_VERSION+set}"; then
       setopt NO_GLOB_SUBST
     fi
 
-    cfgfile="${ofile}T"
+    cfgfile=${ofile}T
     trap "$RM \"$cfgfile\"; exit 1" 1 2 15
     $RM "$cfgfile"
 
     cat <<_LT_EOF >> "$cfgfile"
 #! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Generated automatically by $as_me ($PACKAGE) $VERSION
 # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
 #
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the  same
+# distribution terms that you use for the rest of that program.
 #
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 # The names of the tagged configurations supported by this script.
-available_tags="CXX "
+available_tags='CXX '
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
 
 # ### BEGIN LIBTOOL CONFIG
 
@@ -21461,6 +22077,9 @@
 # Whether or not to optimize for fast installation.
 fast_install=$enable_fast_install
 
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
 # Shell to use when invoking shell scripts.
 SHELL=$lt_SHELL
 
@@ -21572,18 +22191,27 @@
 # Transform the output of nm in a proper C declaration.
 global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
 # Transform the output of nm in a C name address pair.
 global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
 # Transform the output of nm in a C name address pair when lib prefix is needed.
 global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
 
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
 # Specify filename containing input files for \$NM.
 nm_file_list_spec=$lt_nm_file_list_spec
 
-# The root where to search for dependent libraries,and in which our libraries should be installed.
+# The root where to search for dependent libraries,and where our libraries should be installed.
 lt_sysroot=$lt_sysroot
 
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
 # The name of the directory that contains temporary libtool files.
 objdir=$objdir
 
@@ -21674,8 +22302,11 @@
 # Compile-time system search path for libraries.
 sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
 
 # Whether dlopen is supported.
 dlopen_support=$enable_dlopen
@@ -21768,13 +22399,13 @@
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary.
 hardcode_direct=$hardcode_direct
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
 # library is relocated.
 hardcode_direct_absolute=$hardcode_direct_absolute
 
@@ -21840,13 +22471,72 @@
 
 _LT_EOF
 
+    cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+        distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
   case $host_os in
   aix3*)
     cat <<\_LT_EOF >> "$cfgfile"
 # AIX sometimes has problems with the GCC collect2 program.  For some
 # reason, if we set the COLLECT_NAMES environment variable, the problems
 # vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
   COLLECT_NAMES=
   export COLLECT_NAMES
 fi
@@ -21855,7 +22545,7 @@
   esac
 
 
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
 
 
   # We use sed instead of cat because bash on DJGPP gets confused if
@@ -21865,165 +22555,6 @@
   sed '$q' "$ltmain" >> "$cfgfile" \
      || (rm -f "$cfgfile"; exit 1)
 
-  if test x"$xsi_shell" = xyes; then
-  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-func_dirname ()\
-{\
-\    case ${1} in\
-\      */*) func_dirname_result="${1%/*}${2}" ;;\
-\      *  ) func_dirname_result="${3}" ;;\
-\    esac\
-} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_basename ()$/,/^} # func_basename /c\
-func_basename ()\
-{\
-\    func_basename_result="${1##*/}"\
-} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-func_dirname_and_basename ()\
-{\
-\    case ${1} in\
-\      */*) func_dirname_result="${1%/*}${2}" ;;\
-\      *  ) func_dirname_result="${3}" ;;\
-\    esac\
-\    func_basename_result="${1##*/}"\
-} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-func_stripname ()\
-{\
-\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-\    # positional parameters, so assign one to ordinary parameter first.\
-\    func_stripname_result=${3}\
-\    func_stripname_result=${func_stripname_result#"${1}"}\
-\    func_stripname_result=${func_stripname_result%"${2}"}\
-} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-func_split_long_opt ()\
-{\
-\    func_split_long_opt_name=${1%%=*}\
-\    func_split_long_opt_arg=${1#*=}\
-} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-func_split_short_opt ()\
-{\
-\    func_split_short_opt_arg=${1#??}\
-\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-func_lo2o ()\
-{\
-\    case ${1} in\
-\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-\      *)    func_lo2o_result=${1} ;;\
-\    esac\
-} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_xform ()$/,/^} # func_xform /c\
-func_xform ()\
-{\
-    func_xform_result=${1%.*}.lo\
-} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_arith ()$/,/^} # func_arith /c\
-func_arith ()\
-{\
-    func_arith_result=$(( $* ))\
-} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_len ()$/,/^} # func_len /c\
-func_len ()\
-{\
-    func_len_result=${#1}\
-} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-fi
-
-if test x"$lt_shell_append" = xyes; then
-  sed -e '/^func_append ()$/,/^} # func_append /c\
-func_append ()\
-{\
-    eval "${1}+=\\${2}"\
-} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-func_append_quoted ()\
-{\
-\    func_quote_for_eval "${2}"\
-\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
-  # Save a `func_append' function call where possible by direct use of '+='
-  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-else
-  # Save a `func_append' function call even when '+=' is not available
-  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-fi
-
-
    mv -f "$cfgfile" "$ofile" ||
     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
   chmod +x "$ofile"
@@ -22110,13 +22641,13 @@
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary.
 hardcode_direct=$hardcode_direct_CXX
 
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
 # DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
 # library is relocated.
 hardcode_direct_absolute=$hardcode_direct_absolute_CXX
 
diff --git a/dist/configure.ac b/dist/configure.ac
index e7dffbe..38d1dba 100644
--- a/dist/configure.ac
+++ b/dist/configure.ac
@@ -9,17 +9,17 @@
 dnl be defined as -RC2, for example. For real releases, it should be empty.
 
 m4_define(pcre_major, [8])
-m4_define(pcre_minor, [36])
+m4_define(pcre_minor, [37])
 m4_define(pcre_prerelease, [])
-m4_define(pcre_date, [2014-09-26])
+m4_define(pcre_date, [2015-04-28])
 
 # NOTE: The CMakeLists.txt file searches for the above variables in the first
 # 50 lines of this file. Please update that if the variables above are moved.
 
 # Libtool shared library interface versions (current:revision:age)
-m4_define(libpcre_version, [3:4:2])
-m4_define(libpcre16_version, [2:4:2])
-m4_define(libpcre32_version, [0:4:0])
+m4_define(libpcre_version, [3:5:2])
+m4_define(libpcre16_version, [2:5:2])
+m4_define(libpcre32_version, [0:5:0])
 m4_define(libpcreposix_version, [0:3:0])
 m4_define(libpcrecpp_version, [0:1:0])
 
diff --git a/dist/depcomp b/dist/depcomp
index 4ebd5b3..fc98710 100755
--- a/dist/depcomp
+++ b/dist/depcomp
@@ -3,7 +3,7 @@
 
 scriptversion=2013-05-30.07; # UTC
 
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
diff --git a/dist/doc/html/NON-AUTOTOOLS-BUILD.txt b/dist/doc/html/NON-AUTOTOOLS-BUILD.txt
index cddf3e0..1c3da84 100644
--- a/dist/doc/html/NON-AUTOTOOLS-BUILD.txt
+++ b/dist/doc/html/NON-AUTOTOOLS-BUILD.txt
@@ -1,6 +1,14 @@
 Building PCRE without using autotools
 -------------------------------------
 
+NOTE: This document relates to PCRE releases that use the original API, with
+library names libpcre, libpcre16, and libpcre32. January 2015 saw the first
+release of a new API, known as PCRE2, with release numbers starting at 10.00
+and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old libraries
+(now called PCRE1) are still being maintained for bug fixes, but there will be
+no new development. New projects are advised to use the new PCRE2 libraries.
+
+
 This document contains the following sections:
 
   General
@@ -761,4 +769,4 @@
   http://www.vsoft-software.com/downloads.html
 
 ==========================
-Last Updated: 14 May 2013
+Last Updated: 10 February 2015
diff --git a/dist/doc/html/README.txt b/dist/doc/html/README.txt
index e30bd0f..4887ebf 100644
--- a/dist/doc/html/README.txt
+++ b/dist/doc/html/README.txt
@@ -1,7 +1,16 @@
 README file for PCRE (Perl-compatible regular expression library)
 -----------------------------------------------------------------
 
-The latest release of PCRE is always available in three alternative formats
+NOTE: This set of files relates to PCRE releases that use the original API,
+with library names libpcre, libpcre16, and libpcre32. January 2015 saw the
+first release of a new API, known as PCRE2, with release numbers starting at
+10.00 and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old
+libraries (now called PCRE1) are still being maintained for bug fixes, but
+there will be no new development. New projects are advised to use the new PCRE2
+libraries.
+
+
+The latest release of PCRE1 is always available in three alternative formats
 from:
 
   ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-xxx.tar.gz
@@ -990,4 +999,4 @@
 Philip Hazel
 Email local part: ph10
 Email domain: cam.ac.uk
-Last updated: 24 October 2014
+Last updated: 10 February 2015
diff --git a/dist/doc/html/pcre.html b/dist/doc/html/pcre.html
index c2b29aa..c87b106 100644
--- a/dist/doc/html/pcre.html
+++ b/dist/doc/html/pcre.html
@@ -13,13 +13,24 @@
 man page, in case the conversion went wrong.
 <br>
 <ul>
-<li><a name="TOC1" href="#SEC1">INTRODUCTION</a>
-<li><a name="TOC2" href="#SEC2">SECURITY CONSIDERATIONS</a>
-<li><a name="TOC3" href="#SEC3">USER DOCUMENTATION</a>
-<li><a name="TOC4" href="#SEC4">AUTHOR</a>
-<li><a name="TOC5" href="#SEC5">REVISION</a>
+<li><a name="TOC1" href="#SEC1">PLEASE TAKE NOTE</a>
+<li><a name="TOC2" href="#SEC2">INTRODUCTION</a>
+<li><a name="TOC3" href="#SEC3">SECURITY CONSIDERATIONS</a>
+<li><a name="TOC4" href="#SEC4">USER DOCUMENTATION</a>
+<li><a name="TOC5" href="#SEC5">AUTHOR</a>
+<li><a name="TOC6" href="#SEC6">REVISION</a>
 </ul>
-<br><a name="SEC1" href="#TOC1">INTRODUCTION</a><br>
+<br><a name="SEC1" href="#TOC1">PLEASE TAKE NOTE</a><br>
+<P>
+This document relates to PCRE releases that use the original API,
+with library names libpcre, libpcre16, and libpcre32. January 2015 saw the
+first release of a new API, known as PCRE2, with release numbers starting at
+10.00 and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old
+libraries (now called PCRE1) are still being maintained for bug fixes, but
+there will be no new development. New projects are advised to use the new PCRE2
+libraries.
+</P>
+<br><a name="SEC2" href="#TOC1">INTRODUCTION</a><br>
 <P>
 The PCRE library is a set of functions that implement regular expression
 pattern matching using the same syntax and semantics as Perl, with just a few
@@ -115,7 +126,7 @@
 are exported when a shared library is built, and in these cases the
 undocumented symbols are not exported.
 </P>
-<br><a name="SEC2" href="#TOC1">SECURITY CONSIDERATIONS</a><br>
+<br><a name="SEC3" href="#TOC1">SECURITY CONSIDERATIONS</a><br>
 <P>
 If you are using PCRE in a non-UTF application that permits users to supply
 arbitrary patterns for compilation, you should be aware of a feature that
@@ -149,7 +160,7 @@
 <a href="pcreapi.html"><b>pcreapi</b></a>
 page.
 </P>
-<br><a name="SEC3" href="#TOC1">USER DOCUMENTATION</a><br>
+<br><a name="SEC4" href="#TOC1">USER DOCUMENTATION</a><br>
 <P>
 The user documentation for PCRE comprises a number of different sections. In
 the "man" format, each of these is a separate "man page". In the HTML format,
@@ -188,7 +199,7 @@
 In the "man" and HTML formats, there is also a short page for each C library
 function, listing its arguments and results.
 </P>
-<br><a name="SEC4" href="#TOC1">AUTHOR</a><br>
+<br><a name="SEC5" href="#TOC1">AUTHOR</a><br>
 <P>
 Philip Hazel
 <br>
@@ -202,11 +213,11 @@
 taken it away. If you want to email me, use my two initials, followed by the
 two digits 10, at the domain cam.ac.uk.
 </P>
-<br><a name="SEC5" href="#TOC1">REVISION</a><br>
+<br><a name="SEC6" href="#TOC1">REVISION</a><br>
 <P>
-Last updated: 08 January 2014
+Last updated: 10 February 2015
 <br>
-Copyright &copy; 1997-2014 University of Cambridge.
+Copyright &copy; 1997-2015 University of Cambridge.
 <br>
 <p>
 Return to the <a href="index.html">PCRE index page</a>.
diff --git a/dist/doc/pcre.3 b/dist/doc/pcre.3
index 4eda404..0f2837e 100644
--- a/dist/doc/pcre.3
+++ b/dist/doc/pcre.3
@@ -1,6 +1,18 @@
-.TH PCRE 3 "08 January 2014" "PCRE 8.35"
+.TH PCRE 3 "10 February 2015" "PCRE 8.37"
 .SH NAME
-PCRE - Perl-compatible regular expressions
+PCRE - Perl-compatible regular expressions (original API)
+.SH "PLEASE TAKE NOTE"
+.rs
+.sp
+This document relates to PCRE releases that use the original API,
+with library names libpcre, libpcre16, and libpcre32. January 2015 saw the
+first release of a new API, known as PCRE2, with release numbers starting at
+10.00 and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old
+libraries (now called PCRE1) are still being maintained for bug fixes, but
+there will be no new development. New projects are advised to use the new PCRE2
+libraries.
+.
+.
 .SH INTRODUCTION
 .rs
 .sp
@@ -213,6 +225,6 @@
 .rs
 .sp
 .nf
-Last updated: 08 January 2014
-Copyright (c) 1997-2014 University of Cambridge.
+Last updated: 10 February 2015
+Copyright (c) 1997-2015 University of Cambridge.
 .fi
diff --git a/dist/doc/pcre.txt b/dist/doc/pcre.txt
index ce27f4b..bc92e4f 100644
--- a/dist/doc/pcre.txt
+++ b/dist/doc/pcre.txt
@@ -13,7 +13,18 @@
 
 
 NAME
-       PCRE - Perl-compatible regular expressions
+       PCRE - Perl-compatible regular expressions (original API)
+
+PLEASE TAKE NOTE
+
+       This  document relates to PCRE releases that use the original API, with
+       library names libpcre, libpcre16, and libpcre32. January 2015  saw  the
+       first release of a new API, known as PCRE2, with release numbers start-
+       ing  at  10.00  and  library   names   libpcre2-8,   libpcre2-16,   and
+       libpcre2-32. The old libraries (now called PCRE1) are still being main-
+       tained for bug fixes,  but  there  will  be  no  new  development.  New
+       projects are advised to use the new PCRE2 libraries.
+
 
 INTRODUCTION
 
@@ -179,8 +190,8 @@
 
 REVISION
 
-       Last updated: 08 January 2014
-       Copyright (c) 1997-2014 University of Cambridge.
+       Last updated: 10 February 2015
+       Copyright (c) 1997-2015 University of Cambridge.
 ------------------------------------------------------------------------------
 
 
diff --git a/dist/install-sh b/dist/install-sh
index 377bb86..0b0fdcb 100755
--- a/dist/install-sh
+++ b/dist/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2011-11-20.07; # UTC
+scriptversion=2013-12-25.23; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -41,19 +41,15 @@
 # This script is compatible with the BSD install script, but was written
 # from scratch.
 
+tab='	'
 nl='
 '
-IFS=" ""	$nl"
+IFS=" $tab$nl"
 
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
 
-# Don't use :- since 4.3BSD and earlier shells don't like it.
 doit=${DOITPROG-}
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
+doit_exec=${doit:-exec}
 
 # Put in absolute file names if you don't have them in your path;
 # or use environment vars.
@@ -68,17 +64,6 @@
 rmprog=${RMPROG-rm}
 stripprog=${STRIPPROG-strip}
 
-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
 posix_mkdir=
 
 # Desired mode of installed file.
@@ -97,7 +82,7 @@
 dst_arg=
 
 copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly
 
 usage="\
 Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
@@ -137,46 +122,57 @@
     -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-	shift;;
+        shift;;
 
     --help) echo "$usage"; exit $?;;
 
     -m) mode=$2
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-	shift;;
+        case $mode in
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+            echo "$0: invalid mode: $mode" >&2
+            exit 1;;
+        esac
+        shift;;
 
     -o) chowncmd="$chownprog $2"
-	shift;;
+        shift;;
 
     -s) stripcmd=$stripprog;;
 
-    -t) dst_arg=$2
-	# Protect names problematic for 'test' and other utilities.
-	case $dst_arg in
-	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
-	esac
-	shift;;
+    -t)
+        is_target_a_directory=always
+        dst_arg=$2
+        # Protect names problematic for 'test' and other utilities.
+        case $dst_arg in
+          -* | [=\(\)!]) dst_arg=./$dst_arg;;
+        esac
+        shift;;
 
-    -T) no_target_directory=true;;
+    -T) is_target_a_directory=never;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
-    --)	shift
-	break;;
+    --) shift
+        break;;
 
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
+    -*) echo "$0: invalid option: $1" >&2
+        exit 1;;
 
     *)  break;;
   esac
   shift
 done
 
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
 if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
   # When -d is used, all remaining arguments are directories to create.
   # When -t is used, the destination is already specified.
@@ -208,6 +204,15 @@
 fi
 
 if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
+if test -z "$dir_arg"; then
   do_exit='(exit $ret); exit $ret'
   trap "ret=129; $do_exit" 1
   trap "ret=130; $do_exit" 2
@@ -223,16 +228,16 @@
 
     *[0-7])
       if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
       else
-	u_plus_rw='% 200'
+        u_plus_rw='% 200'
       fi
       cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
     *)
       if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
       else
-	u_plus_rw=,u+rw
+        u_plus_rw=,u+rw
       fi
       cp_umask=$mode$u_plus_rw;;
   esac
@@ -269,41 +274,15 @@
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dst_arg: Is a directory" >&2
-	exit 1
+      if test "$is_target_a_directory" = never; then
+        echo "$0: $dst_arg: Is a directory" >&2
+        exit 1
       fi
       dstdir=$dst
       dst=$dstdir/`basename "$src"`
       dstdir_status=0
     else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
+      dstdir=`dirname "$dst"`
       test -d "$dstdir"
       dstdir_status=$?
     fi
@@ -314,74 +293,74 @@
   if test $dstdir_status != 0; then
     case $posix_mkdir in
       '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+        # Create intermediate dirs using mode 755 as modified by the umask.
+        # This is like FreeBSD 'install' as of 1997-10-28.
+        umask=`umask`
+        case $stripcmd.$umask in
+          # Optimize common cases.
+          *[2367][2367]) mkdir_umask=$umask;;
+          .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
 
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
+          *[0-7])
+            mkdir_umask=`expr $umask + 22 \
+              - $umask % 100 % 40 + $umask % 20 \
+              - $umask % 10 % 4 + $umask % 2
+            `;;
+          *) mkdir_umask=$umask,go-w;;
+        esac
 
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
+        # With -d, create the new directory with the user-specified mode.
+        # Otherwise, rely on $mkdir_umask.
+        if test -n "$dir_arg"; then
+          mkdir_mode=-m$mode
+        else
+          mkdir_mode=
+        fi
 
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+        posix_mkdir=false
+        case $umask in
+          *[123567][0-7][0-7])
+            # POSIX mkdir -p sets u+wx bits regardless of umask, which
+            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+            ;;
+          *)
+            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+            trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
 
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
+            if (umask $mkdir_umask &&
+                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+            then
+              if test -z "$dir_arg" || {
+                   # Check for POSIX incompatibilities with -m.
+                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+                   # other-writable bit of parent directory when it shouldn't.
+                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+                   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+                   case $ls_ld_tmpdir in
+                     d????-?r-*) different_mode=700;;
+                     d????-?--*) different_mode=755;;
+                     *) false;;
+                   esac &&
+                   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+                     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+                   }
+                 }
+              then posix_mkdir=:
+              fi
+              rmdir "$tmpdir/d" "$tmpdir"
+            else
+              # Remove any dirs left behind by ancient mkdir implementations.
+              rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+            fi
+            trap '' 0;;
+        esac;;
     esac
 
     if
       $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+        umask $mkdir_umask &&
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
       )
     then :
     else
@@ -391,53 +370,51 @@
       # directory the slow way, step by step, checking for races as we go.
 
       case $dstdir in
-	/*) prefix='/';;
-	[-=\(\)!]*) prefix='./';;
-	*)  prefix='';;
+        /*) prefix='/';;
+        [-=\(\)!]*) prefix='./';;
+        *)  prefix='';;
       esac
 
-      eval "$initialize_posix_glob"
-
       oIFS=$IFS
       IFS=/
-      $posix_glob set -f
+      set -f
       set fnord $dstdir
       shift
-      $posix_glob set +f
+      set +f
       IFS=$oIFS
 
       prefixes=
 
       for d
       do
-	test X"$d" = X && continue
+        test X"$d" = X && continue
 
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
+        prefix=$prefix$d
+        if test -d "$prefix"; then
+          prefixes=
+        else
+          if $posix_mkdir; then
+            (umask=$mkdir_umask &&
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+            # Don't fail if two instances are running concurrently.
+            test -d "$prefix" || exit 1
+          else
+            case $prefix in
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *) qprefix=$prefix;;
+            esac
+            prefixes="$prefixes '$qprefix'"
+          fi
+        fi
+        prefix=$prefix/
       done
 
       if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
+        # Don't fail if two instances are running concurrently.
+        (umask $mkdir_umask &&
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
+          test -d "$dstdir" || exit 1
+        obsolete_mkdir_used=true
       fi
     fi
   fi
@@ -472,15 +449,12 @@
 
     # If -C, don't bother to copy if it wouldn't change the file.
     if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
-
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
+       set -f &&
        set X $old && old=:$2:$4:$5:$6 &&
        set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
-
+       set +f &&
        test "$old" = "$new" &&
        $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
     then
@@ -493,24 +467,24 @@
       # to itself, or perhaps because mv is so ancient that it does not
       # support -f.
       {
-	# Now remove or move aside any old file at destination location.
-	# We try this two ways since rm can't unlink itself on some
-	# systems and the destination file might be busy for other
-	# reasons.  In this case, the final cleanup might fail but the new
-	# file should still install successfully.
-	{
-	  test ! -f "$dst" ||
-	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	  } ||
-	  { echo "$0: cannot unlink or rename $dst" >&2
-	    (exit 1); exit 1
-	  }
-	} &&
+        # Now remove or move aside any old file at destination location.
+        # We try this two ways since rm can't unlink itself on some
+        # systems and the destination file might be busy for other
+        # reasons.  In this case, the final cleanup might fail but the new
+        # file should still install successfully.
+        {
+          test ! -f "$dst" ||
+          $doit $rmcmd -f "$dst" 2>/dev/null ||
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+          } ||
+          { echo "$0: cannot unlink or rename $dst" >&2
+            (exit 1); exit 1
+          }
+        } &&
 
-	# Now rename the file to the real destination.
-	$doit $mvcmd "$dsttmp" "$dst"
+        # Now rename the file to the real destination.
+        $doit $mvcmd "$dsttmp" "$dst"
       }
     fi || exit 1
 
diff --git a/dist/libpcre.pc.in b/dist/libpcre.pc.in
index 1f26b32..0a35da8 100644
--- a/dist/libpcre.pc.in
+++ b/dist/libpcre.pc.in
@@ -9,4 +9,5 @@
 Description: PCRE - Perl compatible regular expressions C library with 8 bit character support
 Version: @PACKAGE_VERSION@
 Libs: -L${libdir} -lpcre
+Libs.private: @PTHREAD_CFLAGS@ @PTHREAD_LIBS@
 Cflags: -I${includedir} @PCRE_STATIC_CFLAG@
diff --git a/dist/libpcre16.pc.in b/dist/libpcre16.pc.in
index f589b75..080c9dc 100644
--- a/dist/libpcre16.pc.in
+++ b/dist/libpcre16.pc.in
@@ -9,4 +9,5 @@
 Description: PCRE - Perl compatible regular expressions C library with 16 bit character support
 Version: @PACKAGE_VERSION@
 Libs: -L${libdir} -lpcre16
+Libs.private: @PTHREAD_CFLAGS@ @PTHREAD_LIBS@
 Cflags: -I${includedir} @PCRE_STATIC_CFLAG@
diff --git a/dist/libpcre32.pc.in b/dist/libpcre32.pc.in
index 6582105..a3ae0e1 100644
--- a/dist/libpcre32.pc.in
+++ b/dist/libpcre32.pc.in
@@ -9,4 +9,5 @@
 Description: PCRE - Perl compatible regular expressions C library with 32 bit character support
 Version: @PACKAGE_VERSION@
 Libs: -L${libdir} -lpcre32
+Libs.private: @PTHREAD_CFLAGS@ @PTHREAD_LIBS@
 Cflags: -I${includedir} @PCRE_STATIC_CFLAG@
diff --git a/dist/ltmain.sh b/dist/ltmain.sh
index 63ae69d..0f0a2da 100644
--- a/dist/ltmain.sh
+++ b/dist/ltmain.sh
@@ -1,9 +1,12 @@
+#! /bin/sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+##               by inline-source v2014-01-03.01
 
-# libtool (GNU libtool) 2.4.2
+# libtool (GNU libtool) 2.4.6
+# Provide generalized library-building support services.
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 1996-2015 Free Software Foundation, Inc.
 # This is free software; see the source for copying conditions.  There is NO
 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
@@ -23,166 +26,670 @@
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-#       --config             show all configuration variables
-#       --debug              enable verbose shell tracing
-#   -n, --dry-run            display commands without modifying any files
-#       --features           display basic configuration information and exit
-#       --mode=MODE          use operation mode MODE
-#       --preserve-dup-deps  don't remove duplicate dependency libraries
-#       --quiet, --silent    don't print informational messages
-#       --no-quiet, --no-silent
-#                            print informational messages (default)
-#       --no-warn            don't display warning messages
-#       --tag=TAG            use configuration variables from tag TAG
-#   -v, --verbose            print more informational messages than default
-#       --no-verbose         don't print the extra informational messages
-#       --version            print version information
-#   -h, --help, --help-all   print short, long, or detailed help message
-#
-# MODE must be one of the following:
-#
-#         clean              remove files from the build directory
-#         compile            compile a source file into a libtool object
-#         execute            automatically set library path, then run a program
-#         finish             complete the installation of libtool libraries
-#         install            install libraries or executables
-#         link               create a library or an executable
-#         uninstall          remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE.  When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-#         host-triplet:	$host
-#         shell:		$SHELL
-#         compiler:		$LTCC
-#         compiler flags:		$LTCFLAGS
-#         linker:		$LD (gnu? $with_gnu_ld)
-#         $progname:	(GNU libtool) 2.4.2
-#         automake:	$automake_version
-#         autoconf:	$autoconf_version
-#
-# Report bugs to <bug-libtool@gnu.org>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
 
 PROGRAM=libtool
 PACKAGE=libtool
-VERSION=2.4.2
-TIMESTAMP=""
-package_revision=1.3337
+VERSION=2.4.6
+package_revision=2.4.6
 
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2015-01-20.17; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# Copyright (C) 2004-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# As a special exception to the GNU General Public License, if you distribute
+# this file as part of a program or library that is built using GNU Libtool,
+# you may include this file under the same distribution terms that you use
+# for the rest of that program.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+#   . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
 else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
 fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
 
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-
-# NLS nuisances: We save the old values to restore during execute mode.
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
 do
-  eval "if test \"\${$lt_var+set}\" = set; then
-          save_$lt_var=\$$lt_var
-          $lt_var=C
-	  export $lt_var
-	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
-	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+  eval "if test set = \"\${$_G_var+set}\"; then
+          save_$_G_var=\$$_G_var
+          $_G_var=C
+	  export $_G_var
+	  _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+	  _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
 	fi"
 done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
 
-$lt_unset CDPATH
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp	$nl"
+
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
+
+
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+    test -f "$1" && test -x "$1"
+}
+
+
+# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+    _G_progs_list=$1
+    _G_check_func=$2
+    _G_PATH=${3-"$PATH"}
+
+    _G_path_prog_max=0
+    _G_path_prog_found=false
+    _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+    for _G_dir in $_G_PATH; do
+      IFS=$_G_save_IFS
+      test -z "$_G_dir" && _G_dir=.
+      for _G_prog_name in $_G_progs_list; do
+        for _exeext in '' .EXE; do
+          _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+          func_executable_p "$_G_path_prog" || continue
+          case `"$_G_path_prog" --version 2>&1` in
+            *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+            *)     $_G_check_func $_G_path_prog
+		   func_path_progs_result=$func_check_prog_result
+		   ;;
+          esac
+          $_G_path_prog_found && break 3
+        done
+      done
+    done
+    IFS=$_G_save_IFS
+    test -z "$func_path_progs_result" && {
+      echo "no acceptable sed could be found in \$PATH" >&2
+      exit 1
+    }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+  _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+  for _G_i in 1 2 3 4 5 6 7; do
+    _G_sed_script=$_G_sed_script$nl$_G_sed_script
+  done
+  echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+  _G_sed_script=
+
+  func_check_prog_sed ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo '' >> conftest.nl
+      "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
+  rm -f conftest.sed
+  SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+  func_check_prog_grep ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    _G_path_prog_max=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo 'GREP' >> conftest.nl
+      "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
+  GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables.  These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
+
+: ${CP="cp -f"}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+
+
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
+
+sed_dirname='s|/[^/]*$||'
+sed_basename='s|^.*/||'
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
+
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
+
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same.  If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion.  Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'.  '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+  s/$_G_bs4/&\\
+/g
+  s/^$_G_bs2$_G_dollar/$_G_bs&/
+  s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+  s/\n//g"
+
+
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
+
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
+
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+#    debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
+
+# By convention, finish your script with:
+#
+#    exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
 
 # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
 # is ksh but when the shell is invoked as "sh" and the current value of
 # the _XPG environment variable is not equal to 1 (one), the special
 # positional parameter $0, within a function call, is the name of the
 # function.
-progpath="$0"
+progpath=$0
+
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
+
+# Make sure we have an absolute progpath for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
+     progdir=`cd "$progdir" && pwd`
+     progpath=$progdir/$progname
+     ;;
+  *)
+     _G_IFS=$IFS
+     IFS=${PATH_SEPARATOR-:}
+     for progdir in $PATH; do
+       IFS=$_G_IFS
+       test -x "$progdir/$progname" && break
+     done
+     IFS=$_G_IFS
+     test -n "$progdir" || progdir=`pwd`
+     progpath=$progdir/$progname
+     ;;
+esac
 
 
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
 
-: ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
-: ${MAKE="make"}
-: ${MKDIR="mkdir"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
 
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+opt_dry_run=false
+opt_quiet=false
+opt_verbose=false
 
-exit_status=$EXIT_SUCCESS
+# Categories 'all' and 'none' are always available.  Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
 
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" 	$lt_nl"
+# By default, display warnings according to 'opt_warning_types'.  Set
+# 'warning_func'  to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
 
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
 
-# func_dirname file append nondir_replacement
+
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
+
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
+
+
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
+{
+    $debug_cmd
+
+    test -t 1 && {
+      # COLORTERM and USE_ANSI_COLORS environment variables take
+      # precedence, because most terminfo databases neglect to describe
+      # whether color sequences are supported.
+      test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+      if test 1 = "$USE_ANSI_COLORS"; then
+        # Standard ANSI escape sequences
+        tc_reset='[0m'
+        tc_bold='[1m';   tc_standout='[7m'
+        tc_red='[31m';   tc_green='[32m'
+        tc_blue='[34m';  tc_cyan='[36m'
+      else
+        # Otherwise trust the terminfo database after all.
+        test -n "`tput sgr0 2>/dev/null`" && {
+          tc_reset=`tput sgr0`
+          test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+          tc_standout=$tc_bold
+          test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+          test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+          test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+          test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+          test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+        }
+      fi
+    }
+
+    require_term_colors=:
+}
+
+
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
+
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
+
+
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
+
+  # We should try to minimise forks, especially on Windows where they are
+  # unreasonably slow, so skip the feature probes when bash or zsh are
+  # being used:
+  if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+    : ${_G_HAVE_ARITH_OP="yes"}
+    : ${_G_HAVE_XSI_OPS="yes"}
+    # The += operator was introduced in bash 3.1
+    case $BASH_VERSION in
+      [12].* | 3.0 | 3.0*) ;;
+      *)
+        : ${_G_HAVE_PLUSEQ_OP="yes"}
+        ;;
+    esac
+  fi
+
+  # _G_HAVE_PLUSEQ_OP
+  # Can be empty, in which case the shell is probed, "yes" if += is
+  # useable or anything else if it does not work.
+  test -z "$_G_HAVE_PLUSEQ_OP" \
+    && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+    && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_append ()
+  {
+    $debug_cmd
+
+    eval "$1+=\$2"
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_append ()
+  {
+    $debug_cmd
+
+    eval "$1=\$$1\$2"
+  }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+  eval 'func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_for_eval "$2"
+    eval "$1+=\\ \$func_quote_for_eval_result"
+  }'
+else
+  func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_for_eval "$2"
+    eval "$1=\$$1\\ \$func_quote_for_eval_result"
+  }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE.  For example:
+#
+#   func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
+{
+    $debug_cmd
+
+    eval _G_current_value='`$ECHO $'$1'`'
+    _G_delim=`expr "$2" : '\(.\)'`
+
+    case $_G_delim$_G_current_value$_G_delim in
+      *"$2$_G_delim"*) ;;
+      *) func_append "$@" ;;
+    esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+  test -z "$_G_HAVE_ARITH_OP" \
+    && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+    && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+  eval 'func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=$(( $* ))
+  }'
+else
+  func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=`expr "$@"`
+  }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  # If this shell supports suffix pattern removal, then use it to avoid
+  # forking. Hide the definitions single quotes in case the shell chokes
+  # on unsupported syntax...
+  _b='func_basename_result=${1##*/}'
+  _d='case $1 in
+        */*) func_dirname_result=${1%/*}$2 ;;
+        *  ) func_dirname_result=$3        ;;
+      esac'
+
+else
+  # ...otherwise fall back to using sed.
+  _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+  _d='func_dirname_result=`$ECHO "$1"  |$SED "$sed_dirname"`
+      if test "X$func_dirname_result" = "X$1"; then
+        func_dirname_result=$3
+      else
+        func_append func_dirname_result "$2"
+      fi'
+fi
+
+eval 'func_basename ()
+{
+    $debug_cmd
+
+    '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
 # Compute the dirname of FILE.  If nonempty, add APPEND to the result,
 # otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
+eval 'func_dirname ()
 {
-    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
-    if test "X$func_dirname_result" = "X${1}"; then
-      func_dirname_result="${3}"
-    else
-      func_dirname_result="$func_dirname_result${2}"
-    fi
-} # func_dirname may be replaced by extended shell implementation
+    $debug_cmd
+
+    '"$_d"'
+}'
 
 
-# func_basename file
-func_basename ()
-{
-    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
-
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
 # call:
 #   dirname:  Compute the dirname of FILE.  If nonempty,
 #             add APPEND to the result, otherwise set result
@@ -190,263 +697,327 @@
 #             value returned in "$func_dirname_result"
 #   basename: Compute filename of FILE.
 #             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
 {
-    # Extract subdirectory from the argument.
-    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
-    if test "X$func_dirname_result" = "X${1}"; then
-      func_dirname_result="${3}"
-    else
-      func_dirname_result="$func_dirname_result${2}"
+    $debug_cmd
+
+    '"$_b"'
+    '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+    $debug_cmd
+
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname: $_G_line"
+    done
+    IFS=$func_echo_IFS
+}
+
+
+# func_echo_all ARG...
+# --------------------
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    _G_infix=$1; shift
+    _G_indent=$_G_infix
+    _G_prefix="$progname: $_G_infix: "
+    _G_message=$*
+
+    # Strip color escape sequences before counting printable length
+    for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
+    do
+      test -n "$_G_tc" && {
+        _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+        _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+      }
+    done
+    _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`"  " ## exclude from sc_prohibit_nested_quotes
+
+    func_echo_infix_1_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_infix_1_IFS
+      $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+      _G_prefix=$_G_indent
+    done
+    IFS=$func_echo_infix_1_IFS
+}
+
+
+# func_error ARG...
+# -----------------
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    func_echo_infix_1 "  $tc_standout${tc_red}error$tc_reset" "$*" >&2
+}
+
+
+# func_fatal_error ARG...
+# -----------------------
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    $debug_cmd
+
+    func_error "$*"
+    exit $EXIT_FAILURE
+}
+
+
+# func_grep EXPRESSION FILENAME
+# -----------------------------
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $debug_cmd
+
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+  test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=${#1}
+  }'
+else
+  func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+  }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    $debug_cmd
+
+    _G_directory_path=$1
+    _G_dir_list=
+
+    if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
+
+      # Protect directory names starting with '-'
+      case $_G_directory_path in
+        -*) _G_directory_path=./$_G_directory_path ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$_G_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        _G_dir_list=$_G_directory_path:$_G_dir_list
+
+        # If the last portion added has no slash in it, the list is done
+        case $_G_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
+      done
+      _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
+
+      func_mkdir_p_IFS=$IFS; IFS=:
+      for _G_dir in $_G_dir_list; do
+	IFS=$func_mkdir_p_IFS
+        # mkdir can fail with a 'File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$_G_dir" 2>/dev/null || :
+      done
+      IFS=$func_mkdir_p_IFS
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$_G_directory_path" || \
+        func_fatal_error "Failed to create '$1'"
     fi
-    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
+}
 
 
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
+# func_mktempdir [BASENAME]
+# -------------------------
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, BASENAME is the basename for that directory.
+func_mktempdir ()
 {
-    case ${2} in
-      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
-    esac
-} # func_stripname may be replaced by extended shell implementation
+    $debug_cmd
 
+    _G_template=${TMPDIR-/tmp}/${1-$progname}
 
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
-		s@/\./@/@g
-		t dotsl
-		s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
+    if test : = "$opt_dry_run"; then
+      # Return a directory name, but don't create it in dry-run mode
+      _G_tmpdir=$_G_template-$$
+    else
+
+      # If mktemp works, use that first and foremost
+      _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$_G_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        _G_tmpdir=$_G_template-${RANDOM-0}$$
+
+        func_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$_G_tmpdir"
+        umask $func_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$_G_tmpdir" || \
+        func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
+    fi
+
+    $ECHO "$_G_tmpdir"
+}
+
 
 # func_normal_abspath PATH
+# ------------------------
 # Remove doubled-up and trailing slashes, "." path components,
 # and cancel out any ".." path components in PATH after making
 # it an absolute path.
-#             value returned in "$func_normal_abspath_result"
 func_normal_abspath ()
 {
-  # Start from root dir and reassemble the path.
-  func_normal_abspath_result=
-  func_normal_abspath_tpath=$1
-  func_normal_abspath_altnamespace=
-  case $func_normal_abspath_tpath in
-    "")
-      # Empty path, that just means $cwd.
-      func_stripname '' '/' "`pwd`"
-      func_normal_abspath_result=$func_stripname_result
-      return
-    ;;
-    # The next three entries are used to spot a run of precisely
-    # two leading slashes without using negated character classes;
-    # we take advantage of case's first-match behaviour.
-    ///*)
-      # Unusual form of absolute path, do nothing.
-    ;;
-    //*)
-      # Not necessarily an ordinary path; POSIX reserves leading '//'
-      # and for example Cygwin uses it to access remote file shares
-      # over CIFS/SMB, so we conserve a leading double slash if found.
-      func_normal_abspath_altnamespace=/
-    ;;
-    /*)
-      # Absolute path, do nothing.
-    ;;
-    *)
-      # Relative path, prepend $cwd.
-      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
-    ;;
-  esac
-  # Cancel out all the simple stuff to save iterations.  We also want
-  # the path to end with a slash for ease of parsing, so make sure
-  # there is one (and only one) here.
-  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
-  while :; do
-    # Processed it all yet?
-    if test "$func_normal_abspath_tpath" = / ; then
-      # If we ascended to the root using ".." the result may be empty now.
-      if test -z "$func_normal_abspath_result" ; then
-        func_normal_abspath_result=/
-      fi
-      break
-    fi
-    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcar"`
-    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcdr"`
-    # Figure out what to do with it
-    case $func_normal_abspath_tcomponent in
+    $debug_cmd
+
+    # These SED scripts presuppose an absolute path with a trailing slash.
+    _G_pathcar='s|^/\([^/]*\).*$|\1|'
+    _G_pathcdr='s|^/[^/]*||'
+    _G_removedotparts=':dotsl
+		s|/\./|/|g
+		t dotsl
+		s|/\.$|/|'
+    _G_collapseslashes='s|/\{1,\}|/|g'
+    _G_finalslash='s|/*$|/|'
+
+    # Start from root dir and reassemble the path.
+    func_normal_abspath_result=
+    func_normal_abspath_tpath=$1
+    func_normal_abspath_altnamespace=
+    case $func_normal_abspath_tpath in
       "")
-        # Trailing empty path component, ignore it.
-      ;;
-      ..)
-        # Parent dir; strip last assembled component from result.
-        func_dirname "$func_normal_abspath_result"
-        func_normal_abspath_result=$func_dirname_result
-      ;;
-      *)
-        # Actual path component, append it.
-        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
-      ;;
-    esac
-  done
-  # Restore leading double-slash if one was found on entry.
-  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
-
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-#             value returned in "$func_relative_path_result"
-func_relative_path ()
-{
-  func_relative_path_result=
-  func_normal_abspath "$1"
-  func_relative_path_tlibdir=$func_normal_abspath_result
-  func_normal_abspath "$2"
-  func_relative_path_tbindir=$func_normal_abspath_result
-
-  # Ascend the tree starting from libdir
-  while :; do
-    # check if we have found a prefix of bindir
-    case $func_relative_path_tbindir in
-      $func_relative_path_tlibdir)
-        # found an exact match
-        func_relative_path_tcancelled=
-        break
+        # Empty path, that just means $cwd.
+        func_stripname '' '/' "`pwd`"
+        func_normal_abspath_result=$func_stripname_result
+        return
         ;;
-      $func_relative_path_tlibdir*)
-        # found a matching prefix
-        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
-        func_relative_path_tcancelled=$func_stripname_result
-        if test -z "$func_relative_path_result"; then
-          func_relative_path_result=.
-        fi
-        break
+      # The next three entries are used to spot a run of precisely
+      # two leading slashes without using negated character classes;
+      # we take advantage of case's first-match behaviour.
+      ///*)
+        # Unusual form of absolute path, do nothing.
+        ;;
+      //*)
+        # Not necessarily an ordinary path; POSIX reserves leading '//'
+        # and for example Cygwin uses it to access remote file shares
+        # over CIFS/SMB, so we conserve a leading double slash if found.
+        func_normal_abspath_altnamespace=/
+        ;;
+      /*)
+        # Absolute path, do nothing.
         ;;
       *)
-        func_dirname $func_relative_path_tlibdir
-        func_relative_path_tlibdir=${func_dirname_result}
-        if test "x$func_relative_path_tlibdir" = x ; then
-          # Have to descend all the way to the root!
-          func_relative_path_result=../$func_relative_path_result
-          func_relative_path_tcancelled=$func_relative_path_tbindir
-          break
-        fi
-        func_relative_path_result=../$func_relative_path_result
+        # Relative path, prepend $cwd.
+        func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
         ;;
     esac
-  done
 
-  # Now calculate path; take care to avoid doubling-up slashes.
-  func_stripname '' '/' "$func_relative_path_result"
-  func_relative_path_result=$func_stripname_result
-  func_stripname '/' '/' "$func_relative_path_tcancelled"
-  if test "x$func_stripname_result" != x ; then
-    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
-  fi
-
-  # Normalisation. If bindir is libdir, return empty string,
-  # else relative path ending with a slash; either way, target
-  # file name can be directly appended.
-  if test ! -z "$func_relative_path_result"; then
-    func_stripname './' '' "$func_relative_path_result/"
-    func_relative_path_result=$func_stripname_result
-  fi
+    # Cancel out all the simple stuff to save iterations.  We also want
+    # the path to end with a slash for ease of parsing, so make sure
+    # there is one (and only one) here.
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+    while :; do
+      # Processed it all yet?
+      if test / = "$func_normal_abspath_tpath"; then
+        # If we ascended to the root using ".." the result may be empty now.
+        if test -z "$func_normal_abspath_result"; then
+          func_normal_abspath_result=/
+        fi
+        break
+      fi
+      func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcar"`
+      func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcdr"`
+      # Figure out what to do with it
+      case $func_normal_abspath_tcomponent in
+        "")
+          # Trailing empty path component, ignore it.
+          ;;
+        ..)
+          # Parent dir; strip last assembled component from result.
+          func_dirname "$func_normal_abspath_result"
+          func_normal_abspath_result=$func_dirname_result
+          ;;
+        *)
+          # Actual path component, append it.
+          func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
+          ;;
+      esac
+    done
+    # Restore leading double-slash if one was found on entry.
+    func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
 }
 
-# The name of this program:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
 
-# Make sure we have an absolute path for reexecution:
-case $progpath in
-  [\\/]*|[A-Za-z]:\\*) ;;
-  *[\\/]*)
-     progdir=$func_dirname_result
-     progdir=`cd "$progdir" && pwd`
-     progpath="$progdir/$progname"
-     ;;
-  *)
-     save_IFS="$IFS"
-     IFS=${PATH_SEPARATOR-:}
-     for progdir in $PATH; do
-       IFS="$save_IFS"
-       test -x "$progdir/$progname" && break
-     done
-     IFS="$save_IFS"
-     test -n "$progdir" || progdir=`pwd`
-     progpath="$progdir/$progname"
-     ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
-
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes.  A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
-  s/$bs4/&\\
-/g
-  s/^$bs2$dollar/$bs&/
-  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
-  s/\n//g"
-
-# Standard options:
-opt_dry_run=false
-opt_help=false
-opt_quiet=false
-opt_verbose=false
-opt_warning=:
-
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
 {
-    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
-}
+    $debug_cmd
 
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
-    $opt_verbose && func_echo ${1+"$@"}
+    $opt_quiet || func_echo ${1+"$@"}
 
     # A bug in bash halts the script if the last line of a function
     # fails when set -e is in force, so we need another command to
@@ -454,450 +1025,1113 @@
     :
 }
 
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO "$*"
-}
 
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
 {
-    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
-}
+    $debug_cmd
 
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
-    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+    func_relative_path_result=
+    func_normal_abspath "$1"
+    func_relative_path_tlibdir=$func_normal_abspath_result
+    func_normal_abspath "$2"
+    func_relative_path_tbindir=$func_normal_abspath_result
 
-    # bash bug again:
+    # Ascend the tree starting from libdir
+    while :; do
+      # check if we have found a prefix of bindir
+      case $func_relative_path_tbindir in
+        $func_relative_path_tlibdir)
+          # found an exact match
+          func_relative_path_tcancelled=
+          break
+          ;;
+        $func_relative_path_tlibdir*)
+          # found a matching prefix
+          func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+          func_relative_path_tcancelled=$func_stripname_result
+          if test -z "$func_relative_path_result"; then
+            func_relative_path_result=.
+          fi
+          break
+          ;;
+        *)
+          func_dirname $func_relative_path_tlibdir
+          func_relative_path_tlibdir=$func_dirname_result
+          if test -z "$func_relative_path_tlibdir"; then
+            # Have to descend all the way to the root!
+            func_relative_path_result=../$func_relative_path_result
+            func_relative_path_tcancelled=$func_relative_path_tbindir
+            break
+          fi
+          func_relative_path_result=../$func_relative_path_result
+          ;;
+      esac
+    done
+
+    # Now calculate path; take care to avoid doubling-up slashes.
+    func_stripname '' '/' "$func_relative_path_result"
+    func_relative_path_result=$func_stripname_result
+    func_stripname '/' '/' "$func_relative_path_tcancelled"
+    if test -n "$func_stripname_result"; then
+      func_append func_relative_path_result "/$func_stripname_result"
+    fi
+
+    # Normalisation. If bindir is libdir, return '.' else relative path.
+    if test -n "$func_relative_path_result"; then
+      func_stripname './' '' "$func_relative_path_result"
+      func_relative_path_result=$func_stripname_result
+    fi
+
+    test -n "$func_relative_path_result" || func_relative_path_result=.
+
     :
 }
 
-# func_fatal_error arg...
-# Echo program name prefixed message to standard error, and exit.
-func_fatal_error ()
-{
-    func_error ${1+"$@"}
-    exit $EXIT_FAILURE
-}
 
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
-    func_error ${1+"$@"}
-    func_fatal_error "$help"
-}
-help="Try \`$progname --help' for more information."  ## default
-
-
-# func_grep expression filename
-# Check whether EXPRESSION matches any line of FILENAME, without output.
-func_grep ()
-{
-    $GREP "$1" "$2" >/dev/null 2>&1
-}
-
-
-# func_mkdir_p directory-path
-# Make sure the entire path to DIRECTORY-PATH is available.
-func_mkdir_p ()
-{
-    my_directory_path="$1"
-    my_dir_list=
-
-    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
-
-      # Protect directory names starting with `-'
-      case $my_directory_path in
-        -*) my_directory_path="./$my_directory_path" ;;
-      esac
-
-      # While some portion of DIR does not yet exist...
-      while test ! -d "$my_directory_path"; do
-        # ...make a list in topmost first order.  Use a colon delimited
-	# list incase some portion of path contains whitespace.
-        my_dir_list="$my_directory_path:$my_dir_list"
-
-        # If the last portion added has no slash in it, the list is done
-        case $my_directory_path in */*) ;; *) break ;; esac
-
-        # ...otherwise throw away the child directory and loop
-        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
-      done
-      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
-
-      save_mkdir_p_IFS="$IFS"; IFS=':'
-      for my_dir in $my_dir_list; do
-	IFS="$save_mkdir_p_IFS"
-        # mkdir can fail with a `File exist' error if two processes
-        # try to create one of the directories concurrently.  Don't
-        # stop in that case!
-        $MKDIR "$my_dir" 2>/dev/null || :
-      done
-      IFS="$save_mkdir_p_IFS"
-
-      # Bail out if we (or some other process) failed to create a directory.
-      test -d "$my_directory_path" || \
-        func_fatal_error "Failed to create \`$1'"
-    fi
-}
-
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible.  If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
-    my_template="${TMPDIR-/tmp}/${1-$progname}"
-
-    if test "$opt_dry_run" = ":"; then
-      # Return a directory name, but don't create it in dry-run mode
-      my_tmpdir="${my_template}-$$"
-    else
-
-      # If mktemp works, use that first and foremost
-      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
-      if test ! -d "$my_tmpdir"; then
-        # Failing that, at least try and use $RANDOM to avoid a race
-        my_tmpdir="${my_template}-${RANDOM-0}$$"
-
-        save_mktempdir_umask=`umask`
-        umask 0077
-        $MKDIR "$my_tmpdir"
-        umask $save_mktempdir_umask
-      fi
-
-      # If we're not in dry-run mode, bomb out on failure
-      test -d "$my_tmpdir" || \
-        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
-    fi
-
-    $ECHO "$my_tmpdir"
-}
-
-
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
+# func_quote_for_eval ARG...
+# --------------------------
+# Aesthetically quote ARGs to be evaled later.
+# This function returns two values:
+#   i) func_quote_for_eval_result
+#      double-quoted, suitable for a subsequent eval
+#  ii) func_quote_for_eval_unquoted_result
+#      has all characters that are still active within double
+#      quotes backslashified.
 func_quote_for_eval ()
 {
-    case $1 in
-      *[\\\`\"\$]*)
-	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
-      *)
-        func_quote_for_eval_unquoted_result="$1" ;;
-    esac
+    $debug_cmd
 
-    case $func_quote_for_eval_unquoted_result in
-      # Double-quote args containing shell metacharacters to delay
-      # word splitting, command substitution and and variable
-      # expansion for a subsequent eval.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
-        ;;
-      *)
-        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
-    esac
+    func_quote_for_eval_unquoted_result=
+    func_quote_for_eval_result=
+    while test 0 -lt $#; do
+      case $1 in
+        *[\\\`\"\$]*)
+	  _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
+        *)
+          _G_unquoted_arg=$1 ;;
+      esac
+      if test -n "$func_quote_for_eval_unquoted_result"; then
+	func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
+      else
+        func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
+      fi
+
+      case $_G_unquoted_arg in
+        # Double-quote args containing shell metacharacters to delay
+        # word splitting, command substitution and variable expansion
+        # for a subsequent eval.
+        # Many Bourne shells cannot handle close brackets correctly
+        # in scan sets, so we specify it separately.
+        *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+          _G_quoted_arg=\"$_G_unquoted_arg\"
+          ;;
+        *)
+          _G_quoted_arg=$_G_unquoted_arg
+	  ;;
+      esac
+
+      if test -n "$func_quote_for_eval_result"; then
+	func_append func_quote_for_eval_result " $_G_quoted_arg"
+      else
+        func_append func_quote_for_eval_result "$_G_quoted_arg"
+      fi
+      shift
+    done
 }
 
 
-# func_quote_for_expand arg
+# func_quote_for_expand ARG
+# -------------------------
 # Aesthetically quote ARG to be evaled later; same as above,
 # but do not quote variable references.
 func_quote_for_expand ()
 {
+    $debug_cmd
+
     case $1 in
       *[\\\`\"]*)
-	my_arg=`$ECHO "$1" | $SED \
-	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+	_G_arg=`$ECHO "$1" | $SED \
+	    -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
       *)
-        my_arg="$1" ;;
+        _G_arg=$1 ;;
     esac
 
-    case $my_arg in
+    case $_G_arg in
       # Double-quote args containing shell metacharacters to delay
       # word splitting and command substitution for a subsequent eval.
       # Many Bourne shells cannot handle close brackets correctly
       # in scan sets, so we specify it separately.
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-        my_arg="\"$my_arg\""
+        _G_arg=\"$_G_arg\"
         ;;
     esac
 
-    func_quote_for_expand_result="$my_arg"
+    func_quote_for_expand_result=$_G_arg
 }
 
 
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_stripname ()
+  {
+    $debug_cmd
+
+    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+    # positional parameters, so assign one to ordinary variable first.
+    func_stripname_result=$3
+    func_stripname_result=${func_stripname_result#"$1"}
+    func_stripname_result=${func_stripname_result%"$2"}
+  }'
+else
+  func_stripname ()
+  {
+    $debug_cmd
+
+    case $2 in
+      .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
+      *)  func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
+    esac
+  }
+fi
+
+
+# func_show_eval CMD [FAIL_EXP]
+# -----------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 # is given, then evaluate it.
 func_show_eval ()
 {
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
+    $debug_cmd
 
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
-      eval "func_echo $func_quote_for_expand_result"
-    }
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
 
-    if ${opt_dry_run-false}; then :; else
-      eval "$my_cmd"
-      my_status=$?
-      if test "$my_status" -eq 0; then :; else
-	eval "(exit $my_status); $my_fail_exp"
+    func_quote_for_expand "$_G_cmd"
+    eval "func_notquiet $func_quote_for_expand_result"
+
+    $opt_dry_run || {
+      eval "$_G_cmd"
+      _G_status=$?
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
       fi
-    fi
+    }
 }
 
 
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# func_show_eval_locale CMD [FAIL_EXP]
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
 # not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
 # is given, then evaluate it.  Use the saved locale for evaluation.
 func_show_eval_locale ()
 {
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
+    $debug_cmd
 
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
+
+    $opt_quiet || {
+      func_quote_for_expand "$_G_cmd"
       eval "func_echo $func_quote_for_expand_result"
     }
 
-    if ${opt_dry_run-false}; then :; else
-      eval "$lt_user_locale
-	    $my_cmd"
-      my_status=$?
-      eval "$lt_safe_locale"
-      if test "$my_status" -eq 0; then :; else
-	eval "(exit $my_status); $my_fail_exp"
+    $opt_dry_run || {
+      eval "$_G_user_locale
+	    $_G_cmd"
+      _G_status=$?
+      eval "$_G_safe_locale"
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
       fi
-    fi
+    }
 }
 
+
 # func_tr_sh
+# ----------
 # Turn $1 into a string suitable for a shell variable name.
 # Result is stored in $func_tr_sh_result.  All characters
 # not in the set a-zA-Z0-9_ are replaced with '_'. Further,
 # if $1 begins with a digit, a '_' is prepended as well.
 func_tr_sh ()
 {
-  case $1 in
-  [0-9]* | *[!a-zA-Z0-9_]*)
-    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
-    ;;
-  * )
-    func_tr_sh_result=$1
-    ;;
-  esac
+    $debug_cmd
+
+    case $1 in
+    [0-9]* | *[!a-zA-Z0-9_]*)
+      func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
+      ;;
+    * )
+      func_tr_sh_result=$1
+      ;;
+    esac
 }
 
 
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
 {
-    $opt_debug
+    $debug_cmd
 
-    $SED -n '/(C)/!b go
-	:more
-	/\./!{
-	  N
-	  s/\n# / /
-	  b more
-	}
-	:go
-	/^# '$PROGRAM' (GNU /,/# warranty; / {
-        s/^# //
-	s/^# *$//
-        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
-        p
-     }' < "$progpath"
-     exit $?
+    $opt_verbose && func_echo "$*"
+
+    :
 }
 
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
 {
-    $opt_debug
+    $debug_cmd
 
-    $SED -n '/^# Usage:/,/^#  *.*--help/ {
-        s/^# //
-	s/^# *$//
-	s/\$progname/'$progname'/
-	p
-    }' < "$progpath"
-    echo
-    $ECHO "run \`$progname --help | more' for full usage"
-    exit $?
+    $require_term_colors
+
+    func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
 }
 
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+    $debug_cmd
+
+    # CATEGORY must be in the warning_categories list!
+    case " $warning_categories " in
+      *" $1 "*) ;;
+      *) func_internal_error "invalid warning category '$1'" ;;
+    esac
+
+    _G_category=$1
+    shift
+
+    case " $opt_warning_types " in
+      *" $_G_category "*) $warning_func ${1+"$@"} ;;
+    esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+    $debug_cmd
+
+    printf '%s\n%s\n' "$1" "$2" \
+      | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false.  Use it like this:
+#
+#  func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+    $debug_cmd
+
+    test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# Set a version string for this script.
+scriptversion=2014-01-07.03; # UTC
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# Copyright (C) 2010-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+#   #!/bin/sh
+#   . relative/path/to/funclib.sh
+#   . relative/path/to/options-parser
+#   scriptversion=1.0
+#   func_options ${1+"$@"}
+#   eval set dummy "$func_options_result"; shift
+#   ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# warranty; '.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath [OPTION]...'
+
+# Short help message in response to '-h' and '--help'.  Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+       --debug        enable verbose shell tracing
+   -W, --warnings=CATEGORY
+                      report the warnings falling in CATEGORY [all]
+   -v, --verbose      verbosely report processing
+       --version      print version information and exit
+   -h, --help         print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+       'all'          show all warnings
+       'none'         turn off all the warnings
+       'error'        warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# to the main code.  A hook is just a named list of of function, that can
+# be run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+    $debug_cmd
+
+    func_append hookable_fns " $1"
+}
+
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns.  FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+    $debug_cmd
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not accept hook functions." ;;
+    esac
+
+    eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
+func_remove_hook ()
+{
+    $debug_cmd
+
+    eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_run_hooks FUNC_NAME [ARG]...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It is assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+    $debug_cmd
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not support hook funcions.n" ;;
+    esac
+
+    eval _G_hook_fns=\$$1_hooks; shift
+
+    for _G_hook in $_G_hook_fns; do
+      eval $_G_hook '"$@"'
+
+      # store returned options list back into positional
+      # parameters for next 'cmd' execution.
+      eval _G_hook_result=\$${_G_hook}_result
+      eval set dummy "$_G_hook_result"; shift
+    done
+
+    func_quote_for_eval ${1+"$@"}
+    func_run_hooks_result=$func_quote_for_eval_result
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list in your hook function, remove any
+# options that you action, and then pass back the remaining unprocessed
+# options in '<hooked_function_name>_result', escaped suitably for
+# 'eval'.  Like this:
+#
+#    my_options_prep ()
+#    {
+#        $debug_cmd
+#
+#        # Extend the existing usage message.
+#        usage_message=$usage_message'
+#      -s, --silent       don'\''t print informational messages
+#    '
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_options_prep_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_options_prep my_options_prep
+#
+#
+#    my_silent_option ()
+#    {
+#        $debug_cmd
+#
+#        # Note that for efficiency, we parse as many options as we can
+#        # recognise in a loop before passing the remainder back to the
+#        # caller on the first unrecognised argument we encounter.
+#        while test $# -gt 0; do
+#          opt=$1; shift
+#          case $opt in
+#            --silent|-s) opt_silent=: ;;
+#            # Separate non-argument short options:
+#            -s*)         func_split_short_opt "$_G_opt"
+#                         set dummy "$func_split_short_opt_name" \
+#                             "-$func_split_short_opt_arg" ${1+"$@"}
+#                         shift
+#                         ;;
+#            *)            set dummy "$_G_opt" "$*"; shift; break ;;
+#          esac
+#        done
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_silent_option_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_parse_options my_silent_option
+#
+#
+#    my_option_validation ()
+#    {
+#        $debug_cmd
+#
+#        $opt_silent && $opt_verbose && func_fatal_help "\
+#    '--silent' and '--verbose' options are mutually exclusive."
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_option_validation_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_validate_options my_option_validation
+#
+# You'll alse need to manually amend $usage_message to reflect the extra
+# options you parse.  It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options [ARG]...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+    $debug_cmd
+
+    func_options_prep ${1+"$@"}
+    eval func_parse_options \
+        ${func_options_prep_result+"$func_options_prep_result"}
+    eval func_validate_options \
+        ${func_parse_options_result+"$func_parse_options_result"}
+
+    eval func_run_hooks func_options \
+        ${func_validate_options_result+"$func_validate_options_result"}
+
+    # save modified positional parameters for caller
+    func_options_result=$func_run_hooks_result
+}
+
+
+# func_options_prep [ARG]...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters.  If a hook function modifies that list, and
+# needs to propogate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before
+# returning.
+func_hookable func_options_prep
+func_options_prep ()
+{
+    $debug_cmd
+
+    # Option defaults:
+    opt_verbose=false
+    opt_warning_types=
+
+    func_run_hooks func_options_prep ${1+"$@"}
+
+    # save modified positional parameters for caller
+    func_options_prep_result=$func_run_hooks_result
+}
+
+
+# func_parse_options [ARG]...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
+{
+    $debug_cmd
+
+    func_parse_options_result=
+
+    # this just eases exit handling
+    while test $# -gt 0; do
+      # Defer to hook functions for initial option parsing, so they
+      # get priority in the event of reusing an option name.
+      func_run_hooks func_parse_options ${1+"$@"}
+
+      # Adjust func_parse_options positional parameters to match
+      eval set dummy "$func_run_hooks_result"; shift
+
+      # Break out of the loop if we already parsed every option.
+      test $# -gt 0 || break
+
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --debug|-x)   debug_cmd='set -x'
+                      func_echo "enabling shell trace mode"
+                      $debug_cmd
+                      ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                      set dummy --warnings none ${1+"$@"}
+                      shift
+		      ;;
+
+        --warnings|--warning|-W)
+                      test $# = 0 && func_missing_arg $_G_opt && break
+                      case " $warning_categories $1" in
+                        *" $1 "*)
+                          # trailing space prevents matching last $1 above
+                          func_append_uniq opt_warning_types " $1"
+                          ;;
+                        *all)
+                          opt_warning_types=$warning_categories
+                          ;;
+                        *none)
+                          opt_warning_types=none
+                          warning_func=:
+                          ;;
+                        *error)
+                          opt_warning_types=$warning_categories
+                          warning_func=func_fatal_error
+                          ;;
+                        *)
+                          func_fatal_error \
+                             "unsupported warning category: '$1'"
+                          ;;
+                      esac
+                      shift
+                      ;;
+
+        --verbose|-v) opt_verbose=: ;;
+        --version)    func_version ;;
+        -\?|-h)       func_usage ;;
+        --help)       func_help ;;
+
+	# Separate optargs to long options (plugins may need this):
+	--*=*)        func_split_equals "$_G_opt"
+	              set dummy "$func_split_equals_lhs" \
+                          "$func_split_equals_rhs" ${1+"$@"}
+                      shift
+                      ;;
+
+       # Separate optargs to short options:
+        -W*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        # Separate non-argument short options:
+        -\?*|-h*|-v*|-x*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "-$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        --)           break ;;
+        -*)           func_fatal_help "unrecognised option: '$_G_opt'" ;;
+        *)            set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+      esac
+    done
+
+    # save modified positional parameters for caller
+    func_quote_for_eval ${1+"$@"}
+    func_parse_options_result=$func_quote_for_eval_result
+}
+
+
+# func_validate_options [ARG]...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
+{
+    $debug_cmd
+
+    # Display all warnings if -W was not given.
+    test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
+
+    func_run_hooks func_validate_options ${1+"$@"}
+
+    # Bail if the options were screwed!
+    $exit_cmd $EXIT_FAILURE
+
+    # save modified positional parameters for caller
+    func_validate_options_result=$func_run_hooks_result
+}
+
+
+
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
+
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    $debug_cmd
+
+    eval \$ECHO \""Usage: $usage"\"
+    eval \$ECHO \""$fatal_help"\"
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
 func_help ()
 {
-    $opt_debug
+    $debug_cmd
 
-    $SED -n '/^# Usage:/,/# Report bugs to/ {
-	:print
-        s/^# //
-	s/^# *$//
-	s*\$progname*'$progname'*
-	s*\$host*'"$host"'*
-	s*\$SHELL*'"$SHELL"'*
-	s*\$LTCC*'"$LTCC"'*
-	s*\$LTCFLAGS*'"$LTCFLAGS"'*
-	s*\$LD*'"$LD"'*
-	s/\$with_gnu_ld/'"$with_gnu_ld"'/
-	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
-	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
-	p
-	d
-     }
-     /^# .* home page:/b print
-     /^# General help using/b print
-     ' < "$progpath"
-    ret=$?
-    if test -z "$1"; then
-      exit $ret
-    fi
+    func_usage_message
+    $ECHO "$long_help_message"
+    exit 0
 }
 
-# func_missing_arg argname
+
+# func_missing_arg ARGNAME
+# ------------------------
 # Echo program name prefixed message to standard error and set global
 # exit_cmd.
 func_missing_arg ()
 {
-    $opt_debug
+    $debug_cmd
 
-    func_error "missing argument for $1."
+    func_error "Missing argument for '$1'."
     exit_cmd=exit
 }
 
 
-# func_split_short_opt shortopt
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
+# splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=${1%%=*}
+      func_split_equals_rhs=${1#*=}
+      test "x$func_split_equals_lhs" = "x$1" \
+        && func_split_equals_rhs=
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
+      func_split_equals_rhs=
+      test "x$func_split_equals_lhs" = "x$1" \
+        || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
+  }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
 # Set func_split_short_opt_name and func_split_short_opt_arg shell
 # variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_arg=${1#??}
+      func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
+      func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
+  }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
 {
-    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
-    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+    $debug_cmd
 
-    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
-    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
+    func_usage_message
+    $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+    exit 0
+}
 
 
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
 {
-    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
-    my_sed_long_arg='1s/^--[^=]*=//'
+    $debug_cmd
 
-    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
-    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
-
-exit_cmd=:
+    eval \$ECHO \""Usage: $usage"\"
+    echo
+    $SED -n 's|^# ||
+        /^Written by/{
+          x;p;x
+        }
+	h
+	/^Written by/q' < "$progpath"
+    echo
+    eval \$ECHO \""$usage_message"\"
+}
 
 
-
-
-
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
-
-# Global variables.
-nonopt=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+func_version ()
 {
-    eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
+    $debug_cmd
 
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
+    printf '%s\n' "$progname $scriptversion"
+    $SED -n '
+        /(C)/!b go
+        :more
+        /\./!{
+          N
+          s|\n# | |
+          b more
+        }
+        :go
+        /^# Written by /,/# warranty; / {
+          s|^# ||
+          s|^# *$||
+          s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
+          p
+        }
+        /^# Written by / {
+          s|^# ||
+          p
+        }
+        /^warranty; /q' < "$progpath"
+
+    exit $?
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.6'
+
+
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
 {
-    func_quote_for_eval "${2}"
-    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
+    $debug_cmd
+
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+    done
+    IFS=$func_echo_IFS
+}
 
 
-# func_arith arithmetic-term...
-func_arith ()
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
 {
-    func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
+    $debug_cmd
+
+    $warning_func ${1+"$@"}
+}
 
 
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath [OPTION]... [MODE-ARG]...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+       --config             show all configuration variables
+       --debug              enable verbose shell tracing
+   -n, --dry-run            display commands without modifying any files
+       --features           display basic configuration information and exit
+       --mode=MODE          use operation mode MODE
+       --no-warnings        equivalent to '-Wnone'
+       --preserve-dup-deps  don't remove duplicate dependency libraries
+       --quiet, --silent    don't print informational messages
+       --tag=TAG            use configuration variables from tag TAG
+   -v, --verbose            print more informational messages than default
+       --version            print version information
+   -W, --warnings=CATEGORY  report the warnings falling in CATEGORY [all]
+   -h, --help, --help-all   print short, long, or detailed help message
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
 {
-    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "$long_help_message
+
+MODE must be one of the following:
+
+       clean           remove files from the build directory
+       compile         compile a source file into a libtool object
+       execute         automatically set library path, then run a program
+       finish          complete the installation of libtool libraries
+       install         install libraries or executables
+       link            create a library or an executable
+       uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+       host-triplet:   $host
+       shell:          $SHELL
+       compiler:       $LTCC
+       compiler flags: $LTCFLAGS
+       linker:         $LD (gnu? $with_gnu_ld)
+       version:        $progname (GNU libtool) 2.4.6
+       automake:       `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+       autoconf:       `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+    exit 0
+}
 
 
-# func_lo2o object
-func_lo2o ()
-{
-    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_lo2o ()
+  {
+    case $1 in
+      *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+      *   ) func_lo2o_result=$1               ;;
+    esac
+  }'
+
+  # func_xform LIBOBJ-OR-SOURCE
+  # ---------------------------
+  # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+  # suffix to a '.lo' libtool-object suffix.
+  eval 'func_xform ()
+  {
+    func_xform_result=${1%.*}.lo
+  }'
+else
+  # ...otherwise fall back to using sed.
+  func_lo2o ()
+  {
+    func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+  }
+
+  func_xform ()
+  {
+    func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
+  }
+fi
 
 
-# func_xform libobj-or-source
-func_xform ()
-{
-    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
-
-
-# func_fatal_configuration arg...
+# func_fatal_configuration ARG...
+# -------------------------------
 # Echo program name prefixed message to standard error, followed by
 # a configuration failure hint, and exit.
 func_fatal_configuration ()
 {
-    func_error ${1+"$@"}
-    func_error "See the $PACKAGE documentation for more information."
-    func_fatal_error "Fatal configuration error."
+    func__fatal_error ${1+"$@"} \
+      "See the $PACKAGE documentation for more information." \
+      "Fatal configuration error."
 }
 
 
 # func_config
+# -----------
 # Display the configuration for all the tags in this script.
 func_config ()
 {
@@ -915,17 +2149,19 @@
     exit $?
 }
 
+
 # func_features
+# -------------
 # Display the features supported by this script.
 func_features ()
 {
     echo "host: $host"
-    if test "$build_libtool_libs" = yes; then
+    if test yes = "$build_libtool_libs"; then
       echo "enable shared libraries"
     else
       echo "disable shared libraries"
     fi
-    if test "$build_old_libs" = yes; then
+    if test yes = "$build_old_libs"; then
       echo "enable static libraries"
     else
       echo "disable static libraries"
@@ -934,314 +2170,350 @@
     exit $?
 }
 
-# func_enable_tag tagname
+
+# func_enable_tag TAGNAME
+# -----------------------
 # Verify that TAGNAME is valid, and either flag an error and exit, or
 # enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
 # variable here.
 func_enable_tag ()
 {
-  # Global variable:
-  tagname="$1"
+    # Global variable:
+    tagname=$1
 
-  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
-  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
-  sed_extractcf="/$re_begincf/,/$re_endcf/p"
+    re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+    re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+    sed_extractcf=/$re_begincf/,/$re_endcf/p
 
-  # Validate tagname.
-  case $tagname in
-    *[!-_A-Za-z0-9,/]*)
-      func_fatal_error "invalid tag name: $tagname"
-      ;;
-  esac
+    # Validate tagname.
+    case $tagname in
+      *[!-_A-Za-z0-9,/]*)
+        func_fatal_error "invalid tag name: $tagname"
+        ;;
+    esac
 
-  # Don't test for the "default" C tag, as we know it's
-  # there but not specially marked.
-  case $tagname in
-    CC) ;;
+    # Don't test for the "default" C tag, as we know it's
+    # there but not specially marked.
+    case $tagname in
+        CC) ;;
     *)
-      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
-	taglist="$taglist $tagname"
+        if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	  taglist="$taglist $tagname"
 
-	# Evaluate the configuration.  Be careful to quote the path
-	# and the sed script, to avoid splitting on whitespace, but
-	# also don't use non-portable quotes within backquotes within
-	# quotes we have to do it in 2 steps:
-	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
-	eval "$extractedcf"
-      else
-	func_error "ignoring unknown tag $tagname"
-      fi
-      ;;
-  esac
+	  # Evaluate the configuration.  Be careful to quote the path
+	  # and the sed script, to avoid splitting on whitespace, but
+	  # also don't use non-portable quotes within backquotes within
+	  # quotes we have to do it in 2 steps:
+	  extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	  eval "$extractedcf"
+        else
+	  func_error "ignoring unknown tag $tagname"
+        fi
+        ;;
+    esac
 }
 
+
 # func_check_version_match
+# ------------------------
 # Ensure that we are using m4 macros, and libtool script from the same
 # release of libtool.
 func_check_version_match ()
 {
-  if test "$package_revision" != "$macro_revision"; then
-    if test "$VERSION" != "$macro_version"; then
-      if test -z "$macro_version"; then
-        cat >&2 <<_LT_EOF
+    if test "$package_revision" != "$macro_revision"; then
+      if test "$VERSION" != "$macro_version"; then
+        if test -z "$macro_version"; then
+          cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 $progname: definition of this LT_INIT comes from an older release.
 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 $progname: and run autoconf again.
 _LT_EOF
-      else
-        cat >&2 <<_LT_EOF
+        else
+          cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
 $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
 $progname: and run autoconf again.
 _LT_EOF
-      fi
-    else
-      cat >&2 <<_LT_EOF
+        fi
+      else
+        cat >&2 <<_LT_EOF
 $progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
 $progname: but the definition of this LT_INIT comes from revision $macro_revision.
 $progname: You should recreate aclocal.m4 with macros from revision $package_revision
 $progname: of $PACKAGE $VERSION and run autoconf again.
 _LT_EOF
-    fi
+      fi
 
-    exit $EXIT_MISMATCH
-  fi
+      exit $EXIT_MISMATCH
+    fi
 }
 
 
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
-  shift; set dummy --mode clean ${1+"$@"}; shift
-  ;;
-compile|compil|compi|comp|com|co|c)
-  shift; set dummy --mode compile ${1+"$@"}; shift
-  ;;
-execute|execut|execu|exec|exe|ex|e)
-  shift; set dummy --mode execute ${1+"$@"}; shift
-  ;;
-finish|finis|fini|fin|fi|f)
-  shift; set dummy --mode finish ${1+"$@"}; shift
-  ;;
-install|instal|insta|inst|ins|in|i)
-  shift; set dummy --mode install ${1+"$@"}; shift
-  ;;
-link|lin|li|l)
-  shift; set dummy --mode link ${1+"$@"}; shift
-  ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-  shift; set dummy --mode uninstall ${1+"$@"}; shift
-  ;;
-esac
-
-
-
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_warning=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
-
-
-# Parse options once, thoroughly.  This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
+# libtool_options_prep [ARG]...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
 {
-  # this just eases exit handling
-  while test $# -gt 0; do
-    opt="$1"
-    shift
-    case $opt in
-      --debug|-x)	opt_debug='set -x'
-			func_echo "enabling shell trace mode"
-			$opt_debug
-			;;
-      --dry-run|--dryrun|-n)
-			opt_dry_run=:
-			;;
-      --config)
-			opt_config=:
-func_config
-			;;
-      --dlopen|-dlopen)
-			optarg="$1"
-			opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
-			shift
-			;;
-      --preserve-dup-deps)
-			opt_preserve_dup_deps=:
-			;;
-      --features)
-			opt_features=:
-func_features
-			;;
-      --finish)
-			opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
-			;;
-      --help)
-			opt_help=:
-			;;
-      --help-all)
-			opt_help_all=:
-opt_help=': help-all'
-			;;
-      --mode)
-			test $# = 0 && func_missing_arg $opt && break
-			optarg="$1"
-			opt_mode="$optarg"
-case $optarg in
-  # Valid mode arguments:
-  clean|compile|execute|finish|install|link|relink|uninstall) ;;
+    $debug_mode
 
-  # Catch anything else as an error
-  *) func_error "invalid argument for $opt"
-     exit_cmd=exit
-     break
-     ;;
-esac
-			shift
-			;;
-      --no-silent|--no-quiet)
-			opt_silent=false
-func_append preserve_args " $opt"
-			;;
-      --no-warning|--no-warn)
-			opt_warning=false
-func_append preserve_args " $opt"
-			;;
-      --no-verbose)
-			opt_verbose=false
-func_append preserve_args " $opt"
-			;;
-      --silent|--quiet)
-			opt_silent=:
-func_append preserve_args " $opt"
-        opt_verbose=false
-			;;
-      --verbose|-v)
-			opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
-			;;
-      --tag)
-			test $# = 0 && func_missing_arg $opt && break
-			optarg="$1"
-			opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
-			shift
-			;;
+    # Option defaults:
+    opt_config=false
+    opt_dlopen=
+    opt_dry_run=false
+    opt_help=false
+    opt_mode=
+    opt_preserve_dup_deps=false
+    opt_quiet=false
 
-      -\?|-h)		func_usage				;;
-      --help)		func_help				;;
-      --version)	func_version				;;
+    nonopt=
+    preserve_args=
 
-      # Separate optargs to long options:
-      --*=*)
-			func_split_long_opt "$opt"
-			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
-			shift
-			;;
-
-      # Separate non-argument short options:
-      -\?*|-h*|-n*|-v*)
-			func_split_short_opt "$opt"
-			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
-			shift
-			;;
-
-      --)		break					;;
-      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
-      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
+    # Shorthand for --mode=foo, only valid as the first argument
+    case $1 in
+    clean|clea|cle|cl)
+      shift; set dummy --mode clean ${1+"$@"}; shift
+      ;;
+    compile|compil|compi|comp|com|co|c)
+      shift; set dummy --mode compile ${1+"$@"}; shift
+      ;;
+    execute|execut|execu|exec|exe|ex|e)
+      shift; set dummy --mode execute ${1+"$@"}; shift
+      ;;
+    finish|finis|fini|fin|fi|f)
+      shift; set dummy --mode finish ${1+"$@"}; shift
+      ;;
+    install|instal|insta|inst|ins|in|i)
+      shift; set dummy --mode install ${1+"$@"}; shift
+      ;;
+    link|lin|li|l)
+      shift; set dummy --mode link ${1+"$@"}; shift
+      ;;
+    uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+      shift; set dummy --mode uninstall ${1+"$@"}; shift
+      ;;
     esac
-  done
 
-  # Validate options:
-
-  # save first non-option argument
-  if test "$#" -gt 0; then
-    nonopt="$opt"
-    shift
-  fi
-
-  # preserve --debug
-  test "$opt_debug" = : || func_append preserve_args " --debug"
-
-  case $host in
-    *cygwin* | *mingw* | *pw32* | *cegcc*)
-      # don't eliminate duplications in $postdeps and $predeps
-      opt_duplicate_compiler_generated_deps=:
-      ;;
-    *)
-      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
-      ;;
-  esac
-
-  $opt_help || {
-    # Sanity checks first:
-    func_check_version_match
-
-    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-      func_fatal_configuration "not configured to build any kind of library"
-    fi
-
-    # Darwin sucks
-    eval std_shrext=\"$shrext_cmds\"
-
-    # Only execute mode is allowed to have -dlopen flags.
-    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
-      func_error "unrecognized option \`-dlopen'"
-      $ECHO "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    # Change the help message to a mode-specific one.
-    generic_help="$help"
-    help="Try \`$progname --help --mode=$opt_mode' for more information."
-  }
-
-
-  # Bail if the options were screwed
-  $exit_cmd $EXIT_FAILURE
+    # Pass back the list of options.
+    func_quote_for_eval ${1+"$@"}
+    libtool_options_prep_result=$func_quote_for_eval_result
 }
+func_add_hook func_options_prep libtool_options_prep
 
 
+# libtool_parse_options [ARG]...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
+{
+    $debug_cmd
+
+    # Perform our own loop to consume as many options as possible in
+    # each iteration.
+    while test $# -gt 0; do
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --dry-run|--dryrun|-n)
+                        opt_dry_run=:
+                        ;;
+
+        --config)       func_config ;;
+
+        --dlopen|-dlopen)
+                        opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+                        shift
+                        ;;
+
+        --preserve-dup-deps)
+                        opt_preserve_dup_deps=: ;;
+
+        --features)     func_features ;;
+
+        --finish)       set dummy --mode finish ${1+"$@"}; shift ;;
+
+        --help)         opt_help=: ;;
+
+        --help-all)     opt_help=': help-all' ;;
+
+        --mode)         test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_mode=$1
+                        case $1 in
+                          # Valid mode arguments:
+                          clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+                          # Catch anything else as an error
+                          *) func_error "invalid argument for $_G_opt"
+                             exit_cmd=exit
+                             break
+                             ;;
+                        esac
+                        shift
+                        ;;
+
+        --no-silent|--no-quiet)
+                        opt_quiet=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                        opt_warning=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-verbose)
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --silent|--quiet)
+                        opt_quiet=:
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --tag)          test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_tag=$1
+                        func_append preserve_args " $_G_opt $1"
+                        func_enable_tag "$1"
+                        shift
+                        ;;
+
+        --verbose|-v)   opt_quiet=false
+                        opt_verbose=:
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+	# An option not handled by this hook function:
+        *)		set dummy "$_G_opt" ${1+"$@"};	shift; break  ;;
+      esac
+    done
+
+
+    # save modified positional parameters for caller
+    func_quote_for_eval ${1+"$@"}
+    libtool_parse_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_parse_options libtool_parse_options
+
+
+
+# libtool_validate_options [ARG]...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+    # save first non-option argument
+    if test 0 -lt $#; then
+      nonopt=$1
+      shift
+    fi
+
+    # preserve --debug
+    test : = "$debug_cmd" || func_append preserve_args " --debug"
+
+    case $host in
+      # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+      # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+      *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+        # don't eliminate duplications in $postdeps and $predeps
+        opt_duplicate_compiler_generated_deps=:
+        ;;
+      *)
+        opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+        ;;
+    esac
+
+    $opt_help || {
+      # Sanity checks first:
+      func_check_version_match
+
+      test yes != "$build_libtool_libs" \
+        && test yes != "$build_old_libs" \
+        && func_fatal_configuration "not configured to build any kind of library"
+
+      # Darwin sucks
+      eval std_shrext=\"$shrext_cmds\"
+
+      # Only execute mode is allowed to have -dlopen flags.
+      if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+        func_error "unrecognized option '-dlopen'"
+        $ECHO "$help" 1>&2
+        exit $EXIT_FAILURE
+      fi
+
+      # Change the help message to a mode-specific one.
+      generic_help=$help
+      help="Try '$progname --help --mode=$opt_mode' for more information."
+    }
+
+    # Pass back the unparsed argument list
+    func_quote_for_eval ${1+"$@"}
+    libtool_validate_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_validate_options libtool_validate_options
+
+
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
+
 
 
 ## ----------- ##
 ##    Main.    ##
 ## ----------- ##
 
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+  $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
 # func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
 # This function is only a basic sanity check; it will hardly flush out
 # determined imposters.
 func_lalib_p ()
 {
     test -f "$1" &&
-      $SED -e 4q "$1" 2>/dev/null \
-        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+      $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
 }
 
 # func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
 # This function implements the same check as func_lalib_p without
 # resorting to external programs.  To this end, it redirects stdin and
 # closes it afterwards, without saving the original file descriptor.
 # As a safety measure, use it only where a negative result would be
-# fatal anyway.  Works if `file' does not exist.
+# fatal anyway.  Works if 'file' does not exist.
 func_lalib_unsafe_p ()
 {
     lalib_p=no
@@ -1249,13 +2521,13 @@
 	for lalib_p_l in 1 2 3 4
 	do
 	    read lalib_p_line
-	    case "$lalib_p_line" in
+	    case $lalib_p_line in
 		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
 	    esac
 	done
 	exec 0<&5 5<&-
     fi
-    test "$lalib_p" = yes
+    test yes = "$lalib_p"
 }
 
 # func_ltwrapper_script_p file
@@ -1264,7 +2536,8 @@
 # determined imposters.
 func_ltwrapper_script_p ()
 {
-    func_lalib_p "$1"
+    test -f "$1" &&
+      $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
 }
 
 # func_ltwrapper_executable_p file
@@ -1289,7 +2562,7 @@
 {
     func_dirname_and_basename "$1" "" "."
     func_stripname '' '.exe' "$func_basename_result"
-    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+    func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
 }
 
 # func_ltwrapper_p file
@@ -1308,11 +2581,13 @@
 # FAIL_CMD may read-access the current command in variable CMD!
 func_execute_cmds ()
 {
-    $opt_debug
+    $debug_cmd
+
     save_ifs=$IFS; IFS='~'
     for cmd in $1; do
-      IFS=$save_ifs
+      IFS=$sp$nl
       eval cmd=\"$cmd\"
+      IFS=$save_ifs
       func_show_eval "$cmd" "${2-:}"
     done
     IFS=$save_ifs
@@ -1324,10 +2599,11 @@
 # Note that it is not necessary on cygwin/mingw to append a dot to
 # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
 # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
+# 'FILE.' does not work on cygwin managed mounts.
 func_source ()
 {
-    $opt_debug
+    $debug_cmd
+
     case $1 in
     */* | *\\*)	. "$1" ;;
     *)		. "./$1" ;;
@@ -1354,10 +2630,10 @@
 # store the result into func_replace_sysroot_result.
 func_replace_sysroot ()
 {
-  case "$lt_sysroot:$1" in
+  case $lt_sysroot:$1 in
   ?*:"$lt_sysroot"*)
     func_stripname "$lt_sysroot" '' "$1"
-    func_replace_sysroot_result="=$func_stripname_result"
+    func_replace_sysroot_result='='$func_stripname_result
     ;;
   *)
     # Including no sysroot.
@@ -1374,7 +2650,8 @@
 # arg is usually of the form 'gcc ...'
 func_infer_tag ()
 {
-    $opt_debug
+    $debug_cmd
+
     if test -n "$available_tags" && test -z "$tagname"; then
       CC_quoted=
       for arg in $CC; do
@@ -1393,7 +2670,7 @@
 	for z in $available_tags; do
 	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
 	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
 	    CC_quoted=
 	    for arg in $CC; do
 	      # Double-quote args containing other shell metacharacters.
@@ -1418,7 +2695,7 @@
 	# line option must be used.
 	if test -z "$tagname"; then
 	  func_echo "unable to infer tagged configuration"
-	  func_fatal_error "specify a tag with \`--tag'"
+	  func_fatal_error "specify a tag with '--tag'"
 #	else
 #	  func_verbose "using $tagname tagged configuration"
 	fi
@@ -1434,15 +2711,15 @@
 # but don't create it if we're doing a dry run.
 func_write_libtool_object ()
 {
-    write_libobj=${1}
-    if test "$build_libtool_libs" = yes; then
-      write_lobj=\'${2}\'
+    write_libobj=$1
+    if test yes = "$build_libtool_libs"; then
+      write_lobj=\'$2\'
     else
       write_lobj=none
     fi
 
-    if test "$build_old_libs" = yes; then
-      write_oldobj=\'${3}\'
+    if test yes = "$build_old_libs"; then
+      write_oldobj=\'$3\'
     else
       write_oldobj=none
     fi
@@ -1450,7 +2727,7 @@
     $opt_dry_run || {
       cat >${write_libobj}T <<EOF
 # $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
 #
 # Please DO NOT delete this file!
 # It is necessary for linking the library.
@@ -1462,7 +2739,7 @@
 non_pic_object=$write_oldobj
 
 EOF
-      $MV "${write_libobj}T" "${write_libobj}"
+      $MV "${write_libobj}T" "$write_libobj"
     }
 }
 
@@ -1482,8 +2759,9 @@
 # be empty on error (or when ARG is empty)
 func_convert_core_file_wine_to_w32 ()
 {
-  $opt_debug
-  func_convert_core_file_wine_to_w32_result="$1"
+  $debug_cmd
+
+  func_convert_core_file_wine_to_w32_result=$1
   if test -n "$1"; then
     # Unfortunately, winepath does not exit with a non-zero error code, so we
     # are forced to check the contents of stdout. On the other hand, if the
@@ -1491,9 +2769,9 @@
     # *an error message* to stdout. So we must check for both error code of
     # zero AND non-empty stdout, which explains the odd construction:
     func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
-    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+    if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
       func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
-        $SED -e "$lt_sed_naive_backslashify"`
+        $SED -e "$sed_naive_backslashify"`
     else
       func_convert_core_file_wine_to_w32_result=
     fi
@@ -1514,18 +2792,19 @@
 # are convertible, then the result may be empty.
 func_convert_core_path_wine_to_w32 ()
 {
-  $opt_debug
+  $debug_cmd
+
   # unfortunately, winepath doesn't convert paths, only file names
-  func_convert_core_path_wine_to_w32_result=""
+  func_convert_core_path_wine_to_w32_result=
   if test -n "$1"; then
     oldIFS=$IFS
     IFS=:
     for func_convert_core_path_wine_to_w32_f in $1; do
       IFS=$oldIFS
       func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
-      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+      if test -n "$func_convert_core_file_wine_to_w32_result"; then
         if test -z "$func_convert_core_path_wine_to_w32_result"; then
-          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+          func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
         else
           func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
         fi
@@ -1554,7 +2833,8 @@
 # environment variable; do not put it in $PATH.
 func_cygpath ()
 {
-  $opt_debug
+  $debug_cmd
+
   if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
     func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
     if test "$?" -ne 0; then
@@ -1563,7 +2843,7 @@
     fi
   else
     func_cygpath_result=
-    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+    func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
   fi
 }
 #end: func_cygpath
@@ -1574,10 +2854,11 @@
 # result in func_convert_core_msys_to_w32_result.
 func_convert_core_msys_to_w32 ()
 {
-  $opt_debug
+  $debug_cmd
+
   # awkward: cmd appends spaces to result
   func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
-    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+    $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
 }
 #end: func_convert_core_msys_to_w32
 
@@ -1588,13 +2869,14 @@
 # func_to_host_file_result to ARG1).
 func_convert_file_check ()
 {
-  $opt_debug
-  if test -z "$2" && test -n "$1" ; then
+  $debug_cmd
+
+  if test -z "$2" && test -n "$1"; then
     func_error "Could not determine host file name corresponding to"
-    func_error "  \`$1'"
+    func_error "  '$1'"
     func_error "Continuing, but uninstalled executables may not work."
     # Fallback:
-    func_to_host_file_result="$1"
+    func_to_host_file_result=$1
   fi
 }
 # end func_convert_file_check
@@ -1606,10 +2888,11 @@
 # func_to_host_file_result to a simplistic fallback value (see below).
 func_convert_path_check ()
 {
-  $opt_debug
+  $debug_cmd
+
   if test -z "$4" && test -n "$3"; then
     func_error "Could not determine the host path corresponding to"
-    func_error "  \`$3'"
+    func_error "  '$3'"
     func_error "Continuing, but uninstalled executables may not work."
     # Fallback.  This is a deliberately simplistic "conversion" and
     # should not be "improved".  See libtool.info.
@@ -1618,7 +2901,7 @@
       func_to_host_path_result=`echo "$3" |
         $SED -e "$lt_replace_pathsep_chars"`
     else
-      func_to_host_path_result="$3"
+      func_to_host_path_result=$3
     fi
   fi
 }
@@ -1630,9 +2913,10 @@
 # and appending REPL if ORIG matches BACKPAT.
 func_convert_path_front_back_pathsep ()
 {
-  $opt_debug
+  $debug_cmd
+
   case $4 in
-  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+  $1 ) func_to_host_path_result=$3$func_to_host_path_result
     ;;
   esac
   case $4 in
@@ -1646,7 +2930,7 @@
 ##################################################
 # $build to $host FILE NAME CONVERSION FUNCTIONS #
 ##################################################
-# invoked via `$to_host_file_cmd ARG'
+# invoked via '$to_host_file_cmd ARG'
 #
 # In each case, ARG is the path to be converted from $build to $host format.
 # Result will be available in $func_to_host_file_result.
@@ -1657,7 +2941,8 @@
 # in func_to_host_file_result.
 func_to_host_file ()
 {
-  $opt_debug
+  $debug_cmd
+
   $to_host_file_cmd "$1"
 }
 # end func_to_host_file
@@ -1669,7 +2954,8 @@
 # in (the comma separated) LAZY, no conversion takes place.
 func_to_tool_file ()
 {
-  $opt_debug
+  $debug_cmd
+
   case ,$2, in
     *,"$to_tool_file_cmd",*)
       func_to_tool_file_result=$1
@@ -1687,7 +2973,7 @@
 # Copy ARG to func_to_host_file_result.
 func_convert_file_noop ()
 {
-  func_to_host_file_result="$1"
+  func_to_host_file_result=$1
 }
 # end func_convert_file_noop
 
@@ -1698,11 +2984,12 @@
 # func_to_host_file_result.
 func_convert_file_msys_to_w32 ()
 {
-  $opt_debug
-  func_to_host_file_result="$1"
+  $debug_cmd
+
+  func_to_host_file_result=$1
   if test -n "$1"; then
     func_convert_core_msys_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result=$func_convert_core_msys_to_w32_result
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -1714,8 +3001,9 @@
 # func_to_host_file_result.
 func_convert_file_cygwin_to_w32 ()
 {
-  $opt_debug
-  func_to_host_file_result="$1"
+  $debug_cmd
+
+  func_to_host_file_result=$1
   if test -n "$1"; then
     # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
     # LT_CYGPATH in this case.
@@ -1731,11 +3019,12 @@
 # and a working winepath. Returns result in func_to_host_file_result.
 func_convert_file_nix_to_w32 ()
 {
-  $opt_debug
-  func_to_host_file_result="$1"
+  $debug_cmd
+
+  func_to_host_file_result=$1
   if test -n "$1"; then
     func_convert_core_file_wine_to_w32 "$1"
-    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -1747,12 +3036,13 @@
 # Returns result in func_to_host_file_result.
 func_convert_file_msys_to_cygwin ()
 {
-  $opt_debug
-  func_to_host_file_result="$1"
+  $debug_cmd
+
+  func_to_host_file_result=$1
   if test -n "$1"; then
     func_convert_core_msys_to_w32 "$1"
     func_cygpath -u "$func_convert_core_msys_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
+    func_to_host_file_result=$func_cygpath_result
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -1765,13 +3055,14 @@
 # in func_to_host_file_result.
 func_convert_file_nix_to_cygwin ()
 {
-  $opt_debug
-  func_to_host_file_result="$1"
+  $debug_cmd
+
+  func_to_host_file_result=$1
   if test -n "$1"; then
     # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
     func_convert_core_file_wine_to_w32 "$1"
     func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
-    func_to_host_file_result="$func_cygpath_result"
+    func_to_host_file_result=$func_cygpath_result
   fi
   func_convert_file_check "$1" "$func_to_host_file_result"
 }
@@ -1781,7 +3072,7 @@
 #############################################
 # $build to $host PATH CONVERSION FUNCTIONS #
 #############################################
-# invoked via `$to_host_path_cmd ARG'
+# invoked via '$to_host_path_cmd ARG'
 #
 # In each case, ARG is the path to be converted from $build to $host format.
 # The result will be available in $func_to_host_path_result.
@@ -1805,10 +3096,11 @@
 to_host_path_cmd=
 func_init_to_host_path_cmd ()
 {
-  $opt_debug
+  $debug_cmd
+
   if test -z "$to_host_path_cmd"; then
     func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
-    to_host_path_cmd="func_convert_path_${func_stripname_result}"
+    to_host_path_cmd=func_convert_path_$func_stripname_result
   fi
 }
 
@@ -1818,7 +3110,8 @@
 # in func_to_host_path_result.
 func_to_host_path ()
 {
-  $opt_debug
+  $debug_cmd
+
   func_init_to_host_path_cmd
   $to_host_path_cmd "$1"
 }
@@ -1829,7 +3122,7 @@
 # Copy ARG to func_to_host_path_result.
 func_convert_path_noop ()
 {
-  func_to_host_path_result="$1"
+  func_to_host_path_result=$1
 }
 # end func_convert_path_noop
 
@@ -1840,8 +3133,9 @@
 # func_to_host_path_result.
 func_convert_path_msys_to_w32 ()
 {
-  $opt_debug
-  func_to_host_path_result="$1"
+  $debug_cmd
+
+  func_to_host_path_result=$1
   if test -n "$1"; then
     # Remove leading and trailing path separator characters from ARG.  MSYS
     # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
@@ -1849,7 +3143,7 @@
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result=$func_convert_core_msys_to_w32_result
     func_convert_path_check : ";" \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
@@ -1863,8 +3157,9 @@
 # func_to_host_file_result.
 func_convert_path_cygwin_to_w32 ()
 {
-  $opt_debug
-  func_to_host_path_result="$1"
+  $debug_cmd
+
+  func_to_host_path_result=$1
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
@@ -1883,14 +3178,15 @@
 # a working winepath.  Returns result in func_to_host_file_result.
 func_convert_path_nix_to_w32 ()
 {
-  $opt_debug
-  func_to_host_path_result="$1"
+  $debug_cmd
+
+  func_to_host_path_result=$1
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
-    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
     func_convert_path_check : ";" \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
@@ -1904,15 +3200,16 @@
 # Returns result in func_to_host_file_result.
 func_convert_path_msys_to_cygwin ()
 {
-  $opt_debug
-  func_to_host_path_result="$1"
+  $debug_cmd
+
+  func_to_host_path_result=$1
   if test -n "$1"; then
     # See func_convert_path_msys_to_w32:
     func_stripname : : "$1"
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
     func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
+    func_to_host_path_result=$func_cygpath_result
     func_convert_path_check : : \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" : "$1"
@@ -1927,8 +3224,9 @@
 # func_to_host_file_result.
 func_convert_path_nix_to_cygwin ()
 {
-  $opt_debug
-  func_to_host_path_result="$1"
+  $debug_cmd
+
+  func_to_host_path_result=$1
   if test -n "$1"; then
     # Remove leading and trailing path separator characters from
     # ARG. msys behavior is inconsistent here, cygpath turns them
@@ -1937,7 +3235,7 @@
     func_to_host_path_tmp1=$func_stripname_result
     func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
     func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
-    func_to_host_path_result="$func_cygpath_result"
+    func_to_host_path_result=$func_cygpath_result
     func_convert_path_check : : \
       "$func_to_host_path_tmp1" "$func_to_host_path_result"
     func_convert_path_front_back_pathsep ":*" "*:" : "$1"
@@ -1946,13 +3244,31 @@
 # end func_convert_path_nix_to_cygwin
 
 
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+  $debug_cmd
+
+  func_dll_def_p_tmp=`$SED -n \
+    -e 's/^[	 ]*//' \
+    -e '/^\(;.*\)*$/d' \
+    -e 's/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p' \
+    -e q \
+    "$1"`
+  test DEF = "$func_dll_def_p_tmp"
+}
+
+
 # func_mode_compile arg...
 func_mode_compile ()
 {
-    $opt_debug
+    $debug_cmd
+
     # Get the compilation command and the source file.
     base_compile=
-    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    srcfile=$nonopt  #  always keep a non-empty value in "srcfile"
     suppress_opt=yes
     suppress_output=
     arg_mode=normal
@@ -1965,12 +3281,12 @@
       case $arg_mode in
       arg  )
 	# do not "continue".  Instead, add this to base_compile
-	lastarg="$arg"
+	lastarg=$arg
 	arg_mode=normal
 	;;
 
       target )
-	libobj="$arg"
+	libobj=$arg
 	arg_mode=normal
 	continue
 	;;
@@ -1980,7 +3296,7 @@
 	case $arg in
 	-o)
 	  test -n "$libobj" && \
-	    func_fatal_error "you cannot specify \`-o' more than once"
+	    func_fatal_error "you cannot specify '-o' more than once"
 	  arg_mode=target
 	  continue
 	  ;;
@@ -2009,12 +3325,12 @@
 	  func_stripname '-Wc,' '' "$arg"
 	  args=$func_stripname_result
 	  lastarg=
-	  save_ifs="$IFS"; IFS=','
+	  save_ifs=$IFS; IFS=,
 	  for arg in $args; do
-	    IFS="$save_ifs"
+	    IFS=$save_ifs
 	    func_append_quoted lastarg "$arg"
 	  done
-	  IFS="$save_ifs"
+	  IFS=$save_ifs
 	  func_stripname ' ' '' "$lastarg"
 	  lastarg=$func_stripname_result
 
@@ -2027,8 +3343,8 @@
 	  # Accept the current argument as the source file.
 	  # The previous "srcfile" becomes the current argument.
 	  #
-	  lastarg="$srcfile"
-	  srcfile="$arg"
+	  lastarg=$srcfile
+	  srcfile=$arg
 	  ;;
 	esac  #  case $arg
 	;;
@@ -2043,13 +3359,13 @@
       func_fatal_error "you must specify an argument for -Xcompile"
       ;;
     target)
-      func_fatal_error "you must specify a target with \`-o'"
+      func_fatal_error "you must specify a target with '-o'"
       ;;
     *)
       # Get the name of the library object.
       test -z "$libobj" && {
 	func_basename "$srcfile"
-	libobj="$func_basename_result"
+	libobj=$func_basename_result
       }
       ;;
     esac
@@ -2069,7 +3385,7 @@
     case $libobj in
     *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
     *)
-      func_fatal_error "cannot determine name of library object from \`$libobj'"
+      func_fatal_error "cannot determine name of library object from '$libobj'"
       ;;
     esac
 
@@ -2078,8 +3394,8 @@
     for arg in $later; do
       case $arg in
       -shared)
-	test "$build_libtool_libs" != yes && \
-	  func_fatal_configuration "can not build a shared library"
+	test yes = "$build_libtool_libs" \
+	  || func_fatal_configuration "cannot build a shared library"
 	build_old_libs=no
 	continue
 	;;
@@ -2105,17 +3421,17 @@
     func_quote_for_eval "$libobj"
     test "X$libobj" != "X$func_quote_for_eval_result" \
       && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
-      && func_warning "libobj name \`$libobj' may not contain shell special characters."
+      && func_warning "libobj name '$libobj' may not contain shell special characters."
     func_dirname_and_basename "$obj" "/" ""
-    objname="$func_basename_result"
-    xdir="$func_dirname_result"
-    lobj=${xdir}$objdir/$objname
+    objname=$func_basename_result
+    xdir=$func_dirname_result
+    lobj=$xdir$objdir/$objname
 
     test -z "$base_compile" && \
       func_fatal_help "you must specify a compilation command"
 
     # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
+    if test yes = "$build_old_libs"; then
       removelist="$obj $lobj $libobj ${libobj}T"
     else
       removelist="$lobj $libobj ${libobj}T"
@@ -2127,16 +3443,16 @@
       pic_mode=default
       ;;
     esac
-    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+    if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
       # non-PIC code in shared libraries is not supported
       pic_mode=default
     fi
 
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
-    if test "$compiler_c_o" = no; then
-      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
-      lockfile="$output_obj.lock"
+    if test no = "$compiler_c_o"; then
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
+      lockfile=$output_obj.lock
     else
       output_obj=
       need_locks=no
@@ -2145,12 +3461,12 @@
 
     # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file
-    if test "$need_locks" = yes; then
+    if test yes = "$need_locks"; then
       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
 	func_echo "Waiting for $lockfile to be removed"
 	sleep 2
       done
-    elif test "$need_locks" = warn; then
+    elif test warn = "$need_locks"; then
       if test -f "$lockfile"; then
 	$ECHO "\
 *** ERROR, $lockfile exists and contains:
@@ -2158,7 +3474,7 @@
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
+your compiler does not support '-c' and '-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
@@ -2180,11 +3496,11 @@
     qsrcfile=$func_quote_for_eval_result
 
     # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
+    if test yes = "$build_libtool_libs"; then
       # Without this assignment, base_compile gets emptied.
       fbsd_hideous_sh_bug=$base_compile
 
-      if test "$pic_mode" != no; then
+      if test no != "$pic_mode"; then
 	command="$base_compile $qsrcfile $pic_flag"
       else
 	# Don't build PIC code
@@ -2201,7 +3517,7 @@
       func_show_eval_locale "$command"	\
           'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
 
-      if test "$need_locks" = warn &&
+      if test warn = "$need_locks" &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
 	$ECHO "\
 *** ERROR, $lockfile contains:
@@ -2212,7 +3528,7 @@
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
+your compiler does not support '-c' and '-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
@@ -2228,20 +3544,20 @@
       fi
 
       # Allow error messages only from the first compilation.
-      if test "$suppress_opt" = yes; then
+      if test yes = "$suppress_opt"; then
 	suppress_output=' >/dev/null 2>&1'
       fi
     fi
 
     # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      if test "$pic_mode" != yes; then
+    if test yes = "$build_old_libs"; then
+      if test yes != "$pic_mode"; then
 	# Don't build PIC code
 	command="$base_compile $qsrcfile$pie_flag"
       else
 	command="$base_compile $qsrcfile $pic_flag"
       fi
-      if test "$compiler_c_o" = yes; then
+      if test yes = "$compiler_c_o"; then
 	func_append command " -o $obj"
       fi
 
@@ -2250,7 +3566,7 @@
       func_show_eval_locale "$command" \
         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
 
-      if test "$need_locks" = warn &&
+      if test warn = "$need_locks" &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
 	$ECHO "\
 *** ERROR, $lockfile contains:
@@ -2261,7 +3577,7 @@
 
 This indicates that another process is trying to use the same
 temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
+your compiler does not support '-c' and '-o' together.  If you
 repeat this compilation, it may succeed, by chance, but you had better
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
@@ -2281,7 +3597,7 @@
       func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
 
       # Unlock the critical section if it was locked
-      if test "$need_locks" != no; then
+      if test no != "$need_locks"; then
 	removelist=$lockfile
         $RM "$lockfile"
       fi
@@ -2291,7 +3607,7 @@
 }
 
 $opt_help || {
-  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+  test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
 }
 
 func_mode_help ()
@@ -2311,7 +3627,7 @@
 Remove files from the build directory.
 
 RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
 to RM.
 
 If FILE is a libtool library, object or program, all the files associated
@@ -2330,16 +3646,16 @@
   -no-suppress      do not suppress compiler output for multiple passes
   -prefer-pic       try to build PIC objects only
   -prefer-non-pic   try to build non-PIC objects only
-  -shared           do not build a \`.o' file suitable for static linking
-  -static           only build a \`.o' file suitable for static linking
+  -shared           do not build a '.o' file suitable for static linking
+  -static           only build a '.o' file suitable for static linking
   -Wc,FLAG          pass FLAG directly to the compiler
 
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
 from the given SOURCEFILE.
 
 The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
         ;;
 
       execute)
@@ -2352,7 +3668,7 @@
 
   -dlopen FILE      add the directory containing FILE to the library path
 
-This mode sets the library path environment variable according to \`-dlopen'
+This mode sets the library path environment variable according to '-dlopen'
 flags.
 
 If any of the ARGS are libtool executable wrappers, then they are translated
@@ -2371,7 +3687,7 @@
 Each LIBDIR is a directory that contains libtool libraries.
 
 The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
+the '--dry-run' option if you just want to see what would be executed."
         ;;
 
       install)
@@ -2381,7 +3697,7 @@
 Install executables or libraries.
 
 INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
+either the 'install' or 'cp' program.
 
 The following components of INSTALL-COMMAND are treated specially:
 
@@ -2407,7 +3723,7 @@
   -avoid-version    do not add a version suffix if possible
   -bindir BINDIR    specify path to binaries directory (for systems where
                     libraries must be found in the PATH setting at runtime)
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlopen FILE      '-dlpreopen' FILE if it cannot be dlopened at runtime
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
   -export-symbols SYMFILE
@@ -2421,7 +3737,8 @@
   -no-install       link a not-installable executable
   -no-undefined     declare that a library does not refer to external symbols
   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -objectlist FILE  use a list of object files found in FILE to specify objects
+  -os2dllname NAME  force a short DLL name on OS/2 (no effect on other OSes)
   -precious-files-regex REGEX
                     don't remove output files matching REGEX
   -release RELEASE  specify package release information
@@ -2441,20 +3758,20 @@
   -Xlinker FLAG     pass linker-specific FLAG directly to the linker
   -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
 
-All other options (arguments beginning with \`-') are ignored.
+All other options (arguments beginning with '-') are ignored.
 
-Every other argument is treated as a filename.  Files ending in \`.la' are
+Every other argument is treated as a filename.  Files ending in '.la' are
 treated as uninstalled libtool libraries, other files are standard or library
 object files.
 
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
 required, except when creating a convenience library.
 
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
 
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
 is created, otherwise an executable program is created."
         ;;
 
@@ -2465,7 +3782,7 @@
 Remove libraries from an installation directory.
 
 RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
 to RM.
 
 If FILE is a libtool library, all the files associated with it are deleted.
@@ -2473,17 +3790,17 @@
         ;;
 
       *)
-        func_fatal_help "invalid operation mode \`$opt_mode'"
+        func_fatal_help "invalid operation mode '$opt_mode'"
         ;;
     esac
 
     echo
-    $ECHO "Try \`$progname --help' for more information about other modes."
+    $ECHO "Try '$progname --help' for more information about other modes."
 }
 
 # Now that we've collected a possible --mode arg, show help if necessary
 if $opt_help; then
-  if test "$opt_help" = :; then
+  if test : = "$opt_help"; then
     func_mode_help
   else
     {
@@ -2491,7 +3808,7 @@
       for opt_mode in compile link execute install finish uninstall clean; do
 	func_mode_help
       done
-    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
+    } | $SED -n '1p; 2,$s/^Usage:/  or: /p'
     {
       func_help noexit
       for opt_mode in compile link execute install finish uninstall clean; do
@@ -2499,7 +3816,7 @@
 	func_mode_help
       done
     } |
-    sed '1d
+    $SED '1d
       /^When reporting/,/^Report/{
 	H
 	d
@@ -2516,16 +3833,17 @@
 # func_mode_execute arg...
 func_mode_execute ()
 {
-    $opt_debug
+    $debug_cmd
+
     # The first argument is the command name.
-    cmd="$nonopt"
+    cmd=$nonopt
     test -z "$cmd" && \
       func_fatal_help "you must specify a COMMAND"
 
     # Handle -dlopen flags immediately.
     for file in $opt_dlopen; do
       test -f "$file" \
-	|| func_fatal_help "\`$file' is not a file"
+	|| func_fatal_help "'$file' is not a file"
 
       dir=
       case $file in
@@ -2535,7 +3853,7 @@
 
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
-	  || func_fatal_help "\`$lib' is not a valid libtool archive"
+	  || func_fatal_help "'$lib' is not a valid libtool archive"
 
 	# Read the libtool library.
 	dlname=
@@ -2546,18 +3864,18 @@
 	if test -z "$dlname"; then
 	  # Warn if it was a shared library.
 	  test -n "$library_names" && \
-	    func_warning "\`$file' was not linked with \`-export-dynamic'"
+	    func_warning "'$file' was not linked with '-export-dynamic'"
 	  continue
 	fi
 
 	func_dirname "$file" "" "."
-	dir="$func_dirname_result"
+	dir=$func_dirname_result
 
 	if test -f "$dir/$objdir/$dlname"; then
 	  func_append dir "/$objdir"
 	else
 	  if test ! -f "$dir/$dlname"; then
-	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+	    func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
 	  fi
 	fi
 	;;
@@ -2565,18 +3883,18 @@
       *.lo)
 	# Just add the directory containing the .lo file.
 	func_dirname "$file" "" "."
-	dir="$func_dirname_result"
+	dir=$func_dirname_result
 	;;
 
       *)
-	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+	func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
 	continue
 	;;
       esac
 
       # Get the absolute pathname.
       absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
+      test -n "$absdir" && dir=$absdir
 
       # Now add the directory to shlibpath_var.
       if eval "test -z \"\$$shlibpath_var\""; then
@@ -2588,7 +3906,7 @@
 
     # This variable tells wrapper scripts just to set shlibpath_var
     # rather than running their programs.
-    libtool_execute_magic="$magic"
+    libtool_execute_magic=$magic
 
     # Check if any of the arguments is a wrapper script.
     args=
@@ -2601,12 +3919,12 @@
 	if func_ltwrapper_script_p "$file"; then
 	  func_source "$file"
 	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
+	  file=$progdir/$program
 	elif func_ltwrapper_executable_p "$file"; then
 	  func_ltwrapper_scriptname "$file"
 	  func_source "$func_ltwrapper_scriptname_result"
 	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
+	  file=$progdir/$program
 	fi
 	;;
       esac
@@ -2614,7 +3932,15 @@
       func_append_quoted args "$file"
     done
 
-    if test "X$opt_dry_run" = Xfalse; then
+    if $opt_dry_run; then
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	echo "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    else
       if test -n "$shlibpath_var"; then
 	# Export the shlibpath_var.
 	eval "export $shlibpath_var"
@@ -2631,25 +3957,18 @@
       done
 
       # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-	echo "export $shlibpath_var"
-      fi
-      $ECHO "$cmd$args"
-      exit $EXIT_SUCCESS
+      exec_cmd=\$cmd$args
     fi
 }
 
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
 
 
 # func_mode_finish arg...
 func_mode_finish ()
 {
-    $opt_debug
+    $debug_cmd
+
     libs=
     libdirs=
     admincmds=
@@ -2663,11 +3982,11 @@
 	if func_lalib_unsafe_p "$opt"; then
 	  func_append libs " $opt"
 	else
-	  func_warning "\`$opt' is not a valid libtool archive"
+	  func_warning "'$opt' is not a valid libtool archive"
 	fi
 
       else
-	func_fatal_error "invalid argument \`$opt'"
+	func_fatal_error "invalid argument '$opt'"
       fi
     done
 
@@ -2682,12 +4001,12 @@
       # Remove sysroot references
       if $opt_dry_run; then
         for lib in $libs; do
-          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+          echo "removing references to $lt_sysroot and '=' prefixes from $lib"
         done
       else
         tmpdir=`func_mktempdir`
         for lib in $libs; do
-	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	  $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
 	    > $tmpdir/tmp-la
 	  mv -f $tmpdir/tmp-la $lib
 	done
@@ -2712,7 +4031,7 @@
     fi
 
     # Exit here if they wanted silent mode.
-    $opt_silent && exit $EXIT_SUCCESS
+    $opt_quiet && exit $EXIT_SUCCESS
 
     if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
       echo "----------------------------------------------------------------------"
@@ -2723,27 +4042,27 @@
       echo
       echo "If you ever happen to want to link against installed libraries"
       echo "in a given directory, LIBDIR, you must either use libtool, and"
-      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+      echo "specify the full pathname of the library, or use the '-LLIBDIR'"
       echo "flag during linking and do at least one of the following:"
       if test -n "$shlibpath_var"; then
-	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+	echo "   - add LIBDIR to the '$shlibpath_var' environment variable"
 	echo "     during execution"
       fi
       if test -n "$runpath_var"; then
-	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+	echo "   - add LIBDIR to the '$runpath_var' environment variable"
 	echo "     during linking"
       fi
       if test -n "$hardcode_libdir_flag_spec"; then
 	libdir=LIBDIR
 	eval flag=\"$hardcode_libdir_flag_spec\"
 
-	$ECHO "   - use the \`$flag' linker flag"
+	$ECHO "   - use the '$flag' linker flag"
       fi
       if test -n "$admincmds"; then
 	$ECHO "   - have your system administrator run these commands:$admincmds"
       fi
       if test -f /etc/ld.so.conf; then
-	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+	echo "   - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
       fi
       echo
 
@@ -2762,18 +4081,20 @@
     exit $EXIT_SUCCESS
 }
 
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
 
 
 # func_mode_install arg...
 func_mode_install ()
 {
-    $opt_debug
+    $debug_cmd
+
     # There may be an optional sh(1) argument at the beginning of
     # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+    if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
        # Allow the use of GNU shtool's install command.
-       case $nonopt in *shtool*) :;; *) false;; esac; then
+       case $nonopt in *shtool*) :;; *) false;; esac
+    then
       # Aesthetically quote it.
       func_quote_for_eval "$nonopt"
       install_prog="$func_quote_for_eval_result "
@@ -2800,7 +4121,7 @@
     opts=
     prev=
     install_type=
-    isdir=no
+    isdir=false
     stripme=
     no_mode=:
     for arg
@@ -2813,7 +4134,7 @@
       fi
 
       case $arg in
-      -d) isdir=yes ;;
+      -d) isdir=: ;;
       -f)
 	if $install_cp; then :; else
 	  prev=$arg
@@ -2831,7 +4152,7 @@
       *)
 	# If the previous option needed an argument, then skip it.
 	if test -n "$prev"; then
-	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
+	  if test X-m = "X$prev" && test -n "$install_override_mode"; then
 	    arg2=$install_override_mode
 	    no_mode=false
 	  fi
@@ -2856,7 +4177,7 @@
       func_fatal_help "you must specify an install program"
 
     test -n "$prev" && \
-      func_fatal_help "the \`$prev' option requires an argument"
+      func_fatal_help "the '$prev' option requires an argument"
 
     if test -n "$install_override_mode" && $no_mode; then
       if $install_cp; then :; else
@@ -2878,19 +4199,19 @@
     dest=$func_stripname_result
 
     # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
+    test -d "$dest" && isdir=:
+    if $isdir; then
+      destdir=$dest
       destname=
     else
       func_dirname_and_basename "$dest" "" "."
-      destdir="$func_dirname_result"
-      destname="$func_basename_result"
+      destdir=$func_dirname_result
+      destname=$func_basename_result
 
       # Not a directory, so check to see that there is only one file specified.
       set dummy $files; shift
       test "$#" -gt 1 && \
-	func_fatal_help "\`$dest' is not a directory"
+	func_fatal_help "'$dest' is not a directory"
     fi
     case $destdir in
     [\\/]* | [A-Za-z]:[\\/]*) ;;
@@ -2899,7 +4220,7 @@
 	case $file in
 	*.lo) ;;
 	*)
-	  func_fatal_help "\`$destdir' must be an absolute directory name"
+	  func_fatal_help "'$destdir' must be an absolute directory name"
 	  ;;
 	esac
       done
@@ -2908,7 +4229,7 @@
 
     # This variable tells wrapper scripts just to set variables rather
     # than running their programs.
-    libtool_install_magic="$magic"
+    libtool_install_magic=$magic
 
     staticlibs=
     future_libdirs=
@@ -2928,7 +4249,7 @@
 
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
-	  || func_fatal_help "\`$file' is not a valid libtool archive"
+	  || func_fatal_help "'$file' is not a valid libtool archive"
 
 	library_names=
 	old_library=
@@ -2950,7 +4271,7 @@
 	fi
 
 	func_dirname "$file" "/" ""
-	dir="$func_dirname_result"
+	dir=$func_dirname_result
 	func_append dir "$objdir"
 
 	if test -n "$relink_command"; then
@@ -2964,7 +4285,7 @@
 	  # are installed into $libdir/../bin (currently, that works fine)
 	  # but it's something to keep an eye on.
 	  test "$inst_prefix_dir" = "$destdir" && \
-	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+	    func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
 
 	  if test -n "$inst_prefix_dir"; then
 	    # Stick the inst_prefix_dir data into the link command.
@@ -2973,29 +4294,36 @@
 	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
 	  fi
 
-	  func_warning "relinking \`$file'"
+	  func_warning "relinking '$file'"
 	  func_show_eval "$relink_command" \
-	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+	    'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
 	fi
 
 	# See the names of the shared library.
 	set dummy $library_names; shift
 	if test -n "$1"; then
-	  realname="$1"
+	  realname=$1
 	  shift
 
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
+	  srcname=$realname
+	  test -n "$relink_command" && srcname=${realname}T
 
 	  # Install the shared library and build the symlinks.
 	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
 	      'exit $?'
-	  tstripme="$stripme"
+	  tstripme=$stripme
 	  case $host_os in
 	  cygwin* | mingw* | pw32* | cegcc*)
 	    case $realname in
 	    *.dll.a)
-	      tstripme=""
+	      tstripme=
+	      ;;
+	    esac
+	    ;;
+	  os2*)
+	    case $realname in
+	    *_dll.a)
+	      tstripme=
 	      ;;
 	    esac
 	    ;;
@@ -3006,7 +4334,7 @@
 
 	  if test "$#" -gt 0; then
 	    # Delete the old symlinks, and create new ones.
-	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # Try 'ln -sf' first, because the 'ln' binary might depend on
 	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
 	    # so we also need to try rm && ln -s.
 	    for linkname
@@ -3017,14 +4345,14 @@
 	  fi
 
 	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
+	  lib=$destdir/$realname
 	  func_execute_cmds "$postinstall_cmds" 'exit $?'
 	fi
 
 	# Install the pseudo-library for information purposes.
 	func_basename "$file"
-	name="$func_basename_result"
-	instname="$dir/$name"i
+	name=$func_basename_result
+	instname=$dir/${name}i
 	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
 
 	# Maybe install the static library, too.
@@ -3036,11 +4364,11 @@
 
 	# Figure out destination file name, if it wasn't already specified.
 	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
+	  destfile=$destdir/$destname
 	else
 	  func_basename "$file"
-	  destfile="$func_basename_result"
-	  destfile="$destdir/$destfile"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
 	fi
 
 	# Deduce the name of the destination old-style object file.
@@ -3050,11 +4378,11 @@
 	  staticdest=$func_lo2o_result
 	  ;;
 	*.$objext)
-	  staticdest="$destfile"
+	  staticdest=$destfile
 	  destfile=
 	  ;;
 	*)
-	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
+	  func_fatal_help "cannot copy a libtool object to '$destfile'"
 	  ;;
 	esac
 
@@ -3063,7 +4391,7 @@
 	  func_show_eval "$install_prog $file $destfile" 'exit $?'
 
 	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
+	if test yes = "$build_old_libs"; then
 	  # Deduce the name of the old-style object file.
 	  func_lo2o "$file"
 	  staticobj=$func_lo2o_result
@@ -3075,23 +4403,23 @@
       *)
 	# Figure out destination file name, if it wasn't already specified.
 	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
+	  destfile=$destdir/$destname
 	else
 	  func_basename "$file"
-	  destfile="$func_basename_result"
-	  destfile="$destdir/$destfile"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
 	fi
 
 	# If the file is missing, and there is a .exe on the end, strip it
 	# because it is most likely a libtool script we actually want to
 	# install
-	stripped_ext=""
+	stripped_ext=
 	case $file in
 	  *.exe)
 	    if test ! -f "$file"; then
 	      func_stripname '' '.exe' "$file"
 	      file=$func_stripname_result
-	      stripped_ext=".exe"
+	      stripped_ext=.exe
 	    fi
 	    ;;
 	esac
@@ -3119,19 +4447,19 @@
 
 	  # Check the variables that should have been set.
 	  test -z "$generated_by_libtool_version" && \
-	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+	    func_fatal_error "invalid libtool wrapper script '$wrapper'"
 
-	  finalize=yes
+	  finalize=:
 	  for lib in $notinst_deplibs; do
 	    # Check to see that each library is installed.
 	    libdir=
 	    if test -f "$lib"; then
 	      func_source "$lib"
 	    fi
-	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
 	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      func_warning "\`$lib' has not been installed in \`$libdir'"
-	      finalize=no
+	      func_warning "'$lib' has not been installed in '$libdir'"
+	      finalize=false
 	    fi
 	  done
 
@@ -3139,29 +4467,29 @@
 	  func_source "$wrapper"
 
 	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
+	  if test no = "$fast_install" && test -n "$relink_command"; then
 	    $opt_dry_run || {
-	      if test "$finalize" = yes; then
+	      if $finalize; then
 	        tmpdir=`func_mktempdir`
 		func_basename "$file$stripped_ext"
-		file="$func_basename_result"
-	        outputname="$tmpdir/$file"
+		file=$func_basename_result
+	        outputname=$tmpdir/$file
 	        # Replace the output file specification.
 	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
 
-	        $opt_silent || {
+	        $opt_quiet || {
 	          func_quote_for_expand "$relink_command"
 		  eval "func_echo $func_quote_for_expand_result"
 	        }
 	        if eval "$relink_command"; then :
 	          else
-		  func_error "error: relink \`$file' with the above command before installing it"
+		  func_error "error: relink '$file' with the above command before installing it"
 		  $opt_dry_run || ${RM}r "$tmpdir"
 		  continue
 	        fi
-	        file="$outputname"
+	        file=$outputname
 	      else
-	        func_warning "cannot relink \`$file'"
+	        func_warning "cannot relink '$file'"
 	      fi
 	    }
 	  else
@@ -3198,10 +4526,10 @@
 
     for file in $staticlibs; do
       func_basename "$file"
-      name="$func_basename_result"
+      name=$func_basename_result
 
       # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
+      oldlib=$destdir/$name
       func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
       tool_oldlib=$func_to_tool_file_result
 
@@ -3216,18 +4544,18 @@
     done
 
     test -n "$future_libdirs" && \
-      func_warning "remember to run \`$progname --finish$future_libdirs'"
+      func_warning "remember to run '$progname --finish$future_libdirs'"
 
     if test -n "$current_libdirs"; then
       # Maybe just do a dry run.
       $opt_dry_run && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+      exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
     else
       exit $EXIT_SUCCESS
     fi
 }
 
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
 
 
 # func_generate_dlsyms outputname originator pic_p
@@ -3235,16 +4563,17 @@
 # a dlpreopen symbol table.
 func_generate_dlsyms ()
 {
-    $opt_debug
-    my_outputname="$1"
-    my_originator="$2"
-    my_pic_p="${3-no}"
-    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+    $debug_cmd
+
+    my_outputname=$1
+    my_originator=$2
+    my_pic_p=${3-false}
+    my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
     my_dlsyms=
 
-    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+    if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
       if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	my_dlsyms="${my_outputname}S.c"
+	my_dlsyms=${my_outputname}S.c
       else
 	func_error "not configured to extract global symbols from dlpreopened files"
       fi
@@ -3255,7 +4584,7 @@
       "") ;;
       *.c)
 	# Discover the nlist of each of the dlfiles.
-	nlist="$output_objdir/${my_outputname}.nm"
+	nlist=$output_objdir/$my_outputname.nm
 
 	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
 
@@ -3263,34 +4592,36 @@
 	func_verbose "creating $output_objdir/$my_dlsyms"
 
 	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
 
 #ifdef __cplusplus
 extern \"C\" {
 #endif
 
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
 #pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
 #endif
 
 /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
    relocations are performed -- see ld's documentation on pseudo-relocs.  */
 # define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
 /* This system does not cope well with relocations in const data.  */
 # define LT_DLSYM_CONST
 #else
 # define LT_DLSYM_CONST const
 #endif
 
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
 /* External symbol declarations for the compiler. */\
 "
 
-	if test "$dlself" = yes; then
-	  func_verbose "generating symbol list for \`$output'"
+	if test yes = "$dlself"; then
+	  func_verbose "generating symbol list for '$output'"
 
 	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
@@ -3298,7 +4629,7 @@
 	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
 	  for progfile in $progfiles; do
 	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
-	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+	    func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
 	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
 	  done
 
@@ -3318,10 +4649,10 @@
 
 	  # Prepare the list of exported symbols
 	  if test -z "$export_symbols"; then
-	    export_symbols="$output_objdir/$outputname.exp"
+	    export_symbols=$output_objdir/$outputname.exp
 	    $opt_dry_run || {
 	      $RM $export_symbols
-	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
 	      case $host in
 	      *cygwin* | *mingw* | *cegcc* )
                 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
@@ -3331,7 +4662,7 @@
 	    }
 	  else
 	    $opt_dry_run || {
-	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
 	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	      case $host in
@@ -3345,22 +4676,22 @@
 	fi
 
 	for dlprefile in $dlprefiles; do
-	  func_verbose "extracting global C symbols from \`$dlprefile'"
+	  func_verbose "extracting global C symbols from '$dlprefile'"
 	  func_basename "$dlprefile"
-	  name="$func_basename_result"
+	  name=$func_basename_result
           case $host in
 	    *cygwin* | *mingw* | *cegcc* )
 	      # if an import library, we need to obtain dlname
 	      if func_win32_import_lib_p "$dlprefile"; then
 	        func_tr_sh "$dlprefile"
 	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
-	        dlprefile_dlbasename=""
+	        dlprefile_dlbasename=
 	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
 	          # Use subshell, to avoid clobbering current variable values
 	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
-	          if test -n "$dlprefile_dlname" ; then
+	          if test -n "$dlprefile_dlname"; then
 	            func_basename "$dlprefile_dlname"
-	            dlprefile_dlbasename="$func_basename_result"
+	            dlprefile_dlbasename=$func_basename_result
 	          else
 	            # no lafile. user explicitly requested -dlpreopen <import library>.
 	            $sharedlib_from_linklib_cmd "$dlprefile"
@@ -3368,7 +4699,7 @@
 	          fi
 	        fi
 	        $opt_dry_run || {
-	          if test -n "$dlprefile_dlbasename" ; then
+	          if test -n "$dlprefile_dlbasename"; then
 	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
 	          else
 	            func_warning "Could not compute DLL name from $name"
@@ -3424,6 +4755,11 @@
 	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
 	  fi
 
+	  func_show_eval '$RM "${nlist}I"'
+	  if test -n "$global_symbol_to_import"; then
+	    eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+	  fi
+
 	  echo >> "$output_objdir/$my_dlsyms" "\
 
 /* The mapping between symbol names and symbols.  */
@@ -3432,11 +4768,30 @@
   void *address;
 } lt_dlsymlist;
 extern LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
+lt_${my_prefix}_LTX_preloaded_symbols[];\
+"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+  LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+  for (; symbol->name; ++symbol)
+    {"
+	    $SED 's/.*/      if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+	    echo >> "$output_objdir/$my_dlsyms" "\
+    }
+}"
+	  fi
+	  echo >> "$output_objdir/$my_dlsyms" "\
 LT_DLSYM_CONST lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
-  { \"$my_originator\", (void *) 0 },"
+{ {\"$my_originator\", (void *) 0},"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+  {\"@INIT@\", (void *) &lt_syminit},"
+	  fi
 
 	  case $need_lib_prefix in
 	  no)
@@ -3478,9 +4833,7 @@
 	  *-*-hpux*)
 	    pic_flag_for_symtable=" $pic_flag"  ;;
 	  *)
-	    if test "X$my_pic_p" != Xno; then
-	      pic_flag_for_symtable=" $pic_flag"
-	    fi
+	    $my_pic_p && pic_flag_for_symtable=" $pic_flag"
 	    ;;
 	  esac
 	  ;;
@@ -3497,10 +4850,10 @@
 	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
 
 	# Clean up the generated files.
-	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
 
 	# Transform the symbol file into the correct name.
-	symfileobj="$output_objdir/${my_outputname}S.$objext"
+	symfileobj=$output_objdir/${my_outputname}S.$objext
 	case $host in
 	*cygwin* | *mingw* | *cegcc* )
 	  if test -f "$output_objdir/$my_outputname.def"; then
@@ -3518,7 +4871,7 @@
 	esac
 	;;
       *)
-	func_fatal_error "unknown suffix for \`$my_dlsyms'"
+	func_fatal_error "unknown suffix for '$my_dlsyms'"
 	;;
       esac
     else
@@ -3532,6 +4885,32 @@
     fi
 }
 
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
 # func_win32_libid arg
 # return the library type of file 'arg'
 #
@@ -3541,8 +4920,9 @@
 # Despite the name, also deal with 64 bit binaries.
 func_win32_libid ()
 {
-  $opt_debug
-  win32_libid_type="unknown"
+  $debug_cmd
+
+  win32_libid_type=unknown
   win32_fileres=`file -L $1 2>/dev/null`
   case $win32_fileres in
   *ar\ archive\ import\ library*) # definitely import
@@ -3552,16 +4932,29 @@
     # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
        $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
-      func_to_tool_file "$1" func_convert_file_msys_to_w32
-      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
-	$SED -n -e '
+      case $nm_interface in
+      "MS dumpbin")
+	if func_cygming_ms_implib_p "$1" ||
+	   func_cygming_gnu_implib_p "$1"
+	then
+	  win32_nmres=import
+	else
+	  win32_nmres=
+	fi
+	;;
+      *)
+	func_to_tool_file "$1" func_convert_file_msys_to_w32
+	win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+	  $SED -n -e '
 	    1,100{
 		/ I /{
-		    s,.*,import,
+		    s|.*|import|
 		    p
 		    q
 		}
 	    }'`
+	;;
+      esac
       case $win32_nmres in
       import*)  win32_libid_type="x86 archive import";;
       *)        win32_libid_type="x86 archive static";;
@@ -3593,7 +4986,8 @@
 #    $sharedlib_from_linklib_result
 func_cygming_dll_for_implib ()
 {
-  $opt_debug
+  $debug_cmd
+
   sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
 }
 
@@ -3610,7 +5004,8 @@
 # specified import library.
 func_cygming_dll_for_implib_fallback_core ()
 {
-  $opt_debug
+  $debug_cmd
+
   match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
   $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
     $SED '/^Contents of section '"$match_literal"':/{
@@ -3646,8 +5041,8 @@
       /./p' |
     # we now have a list, one entry per line, of the stringified
     # contents of the appropriate section of all members of the
-    # archive which possess that section. Heuristic: eliminate
-    # all those which have a first or second character that is
+    # archive that possess that section. Heuristic: eliminate
+    # all those that have a first or second character that is
     # a '.' (that is, objdump's representation of an unprintable
     # character.) This should work for all archives with less than
     # 0x302f exports -- but will fail for DLLs whose name actually
@@ -3658,30 +5053,6 @@
     $SED -e '/^\./d;/^.\./d;q'
 }
 
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
-  $opt_debug
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
-  test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
-  $opt_debug
-  func_to_tool_file "$1" func_convert_file_msys_to_w32
-  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
-  test -n "$func_cygming_ms_implib_tmp"
-}
-
 # func_cygming_dll_for_implib_fallback ARG
 # Platform-specific function to extract the
 # name of the DLL associated with the specified
@@ -3695,16 +5066,17 @@
 #    $sharedlib_from_linklib_result
 func_cygming_dll_for_implib_fallback ()
 {
-  $opt_debug
-  if func_cygming_gnu_implib_p "$1" ; then
+  $debug_cmd
+
+  if func_cygming_gnu_implib_p "$1"; then
     # binutils import library
     sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
-  elif func_cygming_ms_implib_p "$1" ; then
+  elif func_cygming_ms_implib_p "$1"; then
     # ms-generated import library
     sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
   else
     # unknown
-    sharedlib_from_linklib_result=""
+    sharedlib_from_linklib_result=
   fi
 }
 
@@ -3712,10 +5084,11 @@
 # func_extract_an_archive dir oldlib
 func_extract_an_archive ()
 {
-    $opt_debug
-    f_ex_an_ar_dir="$1"; shift
-    f_ex_an_ar_oldlib="$1"
-    if test "$lock_old_archive_extraction" = yes; then
+    $debug_cmd
+
+    f_ex_an_ar_dir=$1; shift
+    f_ex_an_ar_oldlib=$1
+    if test yes = "$lock_old_archive_extraction"; then
       lockfile=$f_ex_an_ar_oldlib.lock
       until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
 	func_echo "Waiting for $lockfile to be removed"
@@ -3724,7 +5097,7 @@
     fi
     func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
 		   'stat=$?; rm -f "$lockfile"; exit $stat'
-    if test "$lock_old_archive_extraction" = yes; then
+    if test yes = "$lock_old_archive_extraction"; then
       $opt_dry_run || rm -f "$lockfile"
     fi
     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
@@ -3738,22 +5111,23 @@
 # func_extract_archives gentop oldlib ...
 func_extract_archives ()
 {
-    $opt_debug
-    my_gentop="$1"; shift
+    $debug_cmd
+
+    my_gentop=$1; shift
     my_oldlibs=${1+"$@"}
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
+    my_oldobjs=
+    my_xlib=
+    my_xabs=
+    my_xdir=
 
     for my_xlib in $my_oldlibs; do
       # Extract the objects.
       case $my_xlib in
-	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
 	*) my_xabs=`pwd`"/$my_xlib" ;;
       esac
       func_basename "$my_xlib"
-      my_xlib="$func_basename_result"
+      my_xlib=$func_basename_result
       my_xlib_u=$my_xlib
       while :; do
         case " $extracted_archives " in
@@ -3765,7 +5139,7 @@
 	esac
       done
       extracted_archives="$extracted_archives $my_xlib_u"
-      my_xdir="$my_gentop/$my_xlib_u"
+      my_xdir=$my_gentop/$my_xlib_u
 
       func_mkdir_p "$my_xdir"
 
@@ -3778,22 +5152,23 @@
 	  cd $my_xdir || exit $?
 	  darwin_archive=$my_xabs
 	  darwin_curdir=`pwd`
-	  darwin_base_archive=`basename "$darwin_archive"`
+	  func_basename "$darwin_archive"
+	  darwin_base_archive=$func_basename_result
 	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
 	  if test -n "$darwin_arches"; then
 	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
 	    darwin_arch=
 	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
-	    for darwin_arch in  $darwin_arches ; do
-	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	    for darwin_arch in  $darwin_arches; do
+	      func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
+	      cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      func_extract_an_archive "`pwd`" "$darwin_base_archive"
 	      cd "$darwin_curdir"
-	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	      $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
 	    done # $darwin_arches
             ## Okay now we've a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
 	    darwin_file=
 	    darwin_files=
 	    for darwin_file in $darwin_filelist; do
@@ -3815,7 +5190,7 @@
       my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
     done
 
-    func_extract_archives_result="$my_oldobjs"
+    func_extract_archives_result=$my_oldobjs
 }
 
 
@@ -3830,7 +5205,7 @@
 #
 # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
 # variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
+# will assume that the directory where it is stored is
 # the $objdir directory.  This is a cygwin/mingw-specific
 # behavior.
 func_emit_wrapper ()
@@ -3841,7 +5216,7 @@
 #! $SHELL
 
 # $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
 #
 # The $output program cannot be directly executed until all the libtool
 # libraries that it depends on are installed.
@@ -3898,9 +5273,9 @@
 
 # Very basic option parsing. These options are (a) specific to
 # the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
+# /script/ and the wrapper /executable/ that is used only on
 # windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
+# (application programs are unlikely to have options that match
 # this pattern).
 #
 # There are only two supported options: --lt-debug and
@@ -3933,7 +5308,7 @@
 
   # Print the debug banner immediately:
   if test -n \"\$lt_option_debug\"; then
-    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+    echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
   fi
 }
 
@@ -3944,7 +5319,7 @@
   lt_dump_args_N=1;
   for lt_arg
   do
-    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
     lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
   done
 }
@@ -3958,7 +5333,7 @@
   *-*-mingw | *-*-os2* | *-cegcc*)
     $ECHO "\
       if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
         func_lt_dump_args \${1+\"\$@\"} 1>&2
       fi
       exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
@@ -3968,7 +5343,7 @@
   *)
     $ECHO "\
       if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
         func_lt_dump_args \${1+\"\$@\"} 1>&2
       fi
       exec \"\$progdir/\$program\" \${1+\"\$@\"}
@@ -4043,13 +5418,13 @@
   test -n \"\$absdir\" && thisdir=\"\$absdir\"
 "
 
-	if test "$fast_install" = yes; then
+	if test yes = "$fast_install"; then
 	  $ECHO "\
   program=lt-'$outputname'$exeext
   progdir=\"\$thisdir/$objdir\"
 
   if test ! -f \"\$progdir/\$program\" ||
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
        test \"X\$file\" != \"X\$progdir/\$program\"; }; then
 
     file=\"\$\$-\$program\"
@@ -4066,7 +5441,7 @@
     if test -n \"\$relink_command\"; then
       if relink_command_output=\`eval \$relink_command 2>&1\`; then :
       else
-	$ECHO \"\$relink_command_output\" >&2
+	\$ECHO \"\$relink_command_output\" >&2
 	$RM \"\$progdir/\$file\"
 	exit 1
       fi
@@ -4101,7 +5476,7 @@
 	fi
 
 	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
 	  $ECHO "\
     # Add our own library path to $shlibpath_var
     $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
@@ -4121,7 +5496,7 @@
     fi
   else
     # The program doesn't exist.
-    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
     \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
     exit 1
@@ -4140,7 +5515,7 @@
 	cat <<EOF
 
 /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+   Generated by $PROGRAM (GNU $PACKAGE) $VERSION
 
    The $output program cannot be directly executed until all the libtool
    libraries that it depends on are installed.
@@ -4175,47 +5550,45 @@
 #include <fcntl.h>
 #include <sys/stat.h>
 
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
 /* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
+#if defined __MINGW32__
 # ifdef __STRICT_ANSI__
 int _putenv (const char *);
 # endif
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
 # ifdef __STRICT_ANSI__
 char *realpath (const char *, char *);
 int putenv (char *);
 int setenv (const char *, const char *, int);
 # endif
-/* #elif defined (other platforms) ... */
+/* #elif defined other_platform || defined ... */
 #endif
 
 /* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
+#if defined _MSC_VER
 # define setmode _setmode
 # define stat    _stat
 # define chmod   _chmod
 # define getcwd  _getcwd
 # define putenv  _putenv
 # define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-#  define _INTPTR_T_DEFINED
-#  define intptr_t int
-# endif
-#elif defined(__MINGW32__)
+#elif defined __MINGW32__
 # define setmode _setmode
 # define stat    _stat
 # define chmod   _chmod
 # define getcwd  _getcwd
 # define putenv  _putenv
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
 # define HAVE_SETENV
 # define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
+/* #elif defined other platforms ... */
 #endif
 
-#if defined(PATH_MAX)
+#if defined PATH_MAX
 # define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
+#elif defined MAXPATHLEN
 # define LT_PATHMAX MAXPATHLEN
 #else
 # define LT_PATHMAX 1024
@@ -4234,8 +5607,8 @@
 # define PATH_SEPARATOR ':'
 #endif
 
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-  defined (__OS2__)
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+  defined __OS2__
 # define HAVE_DOS_BASED_FILE_SYSTEM
 # define FOPEN_WB "wb"
 # ifndef DIR_SEPARATOR_2
@@ -4268,10 +5641,10 @@
 
 #define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
 #define XFREE(stale) do { \
-  if (stale) { free ((void *) stale); stale = 0; } \
+  if (stale) { free (stale); stale = 0; } \
 } while (0)
 
-#if defined(LT_DEBUGWRAPPER)
+#if defined LT_DEBUGWRAPPER
 static int lt_debug = 1;
 #else
 static int lt_debug = 0;
@@ -4300,11 +5673,16 @@
 EOF
 
 	    cat <<EOF
-volatile const char * MAGIC_EXE = "$magic_exe";
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+# define externally_visible volatile
+#else
+# define externally_visible __attribute__((externally_visible)) volatile
+#endif
+externally_visible const char * MAGIC_EXE = "$magic_exe";
 const char * LIB_PATH_VARNAME = "$shlibpath_var";
 EOF
 
-	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	    if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
               func_to_host_path "$temp_rpath"
 	      cat <<EOF
 const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
@@ -4328,7 +5706,7 @@
 EOF
 	    fi
 
-	    if test "$fast_install" = yes; then
+	    if test yes = "$fast_install"; then
 	      cat <<EOF
 const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
 EOF
@@ -4357,12 +5735,12 @@
   char *actual_cwrapper_name;
   char *target_name;
   char *lt_argv_zero;
-  intptr_t rval = 127;
+  int rval = 127;
 
   int i;
 
   program_name = (char *) xstrdup (base_name (argv[0]));
-  newargz = XMALLOC (char *, argc + 1);
+  newargz = XMALLOC (char *, (size_t) argc + 1);
 
   /* very simple arg parsing; don't want to rely on getopt
    * also, copy all non cwrapper options to newargz, except
@@ -4371,10 +5749,10 @@
   newargc=0;
   for (i = 1; i < argc; i++)
     {
-      if (strcmp (argv[i], dumpscript_opt) == 0)
+      if (STREQ (argv[i], dumpscript_opt))
 	{
 EOF
-	    case "$host" in
+	    case $host in
 	      *mingw* | *cygwin* )
 		# make stdout use "unix" line endings
 		echo "          setmode(1,_O_BINARY);"
@@ -4385,12 +5763,12 @@
 	  lt_dump_script (stdout);
 	  return 0;
 	}
-      if (strcmp (argv[i], debug_opt) == 0)
+      if (STREQ (argv[i], debug_opt))
 	{
           lt_debug = 1;
           continue;
 	}
-      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+      if (STREQ (argv[i], ltwrapper_option_prefix))
         {
           /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
              namespace, but it is not one of the ones we know about and
@@ -4413,7 +5791,7 @@
 EOF
 	    cat <<EOF
   /* The GNU banner must be the first non-error debug message */
-  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
 EOF
 	    cat <<"EOF"
   lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
@@ -4524,7 +5902,7 @@
 		cat <<"EOF"
   /* execv doesn't actually work on mingw as expected on unix */
   newargz = prepare_spawn (newargz);
-  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
   if (rval == -1)
     {
       /* failed to start process */
@@ -4569,7 +5947,7 @@
 {
   const char *base;
 
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
   /* Skip over the disk name in MSDOS pathnames. */
   if (isalpha ((unsigned char) name[0]) && name[1] == ':')
     name += 2;
@@ -4628,7 +6006,7 @@
   const char *p_next;
   /* static buffer for getcwd */
   char tmp[LT_PATHMAX + 1];
-  int tmp_len;
+  size_t tmp_len;
   char *concat_name;
 
   lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
@@ -4638,7 +6016,7 @@
     return NULL;
 
   /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
   if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
     {
       concat_name = xstrdup (wrapper);
@@ -4656,7 +6034,7 @@
 	    return concat_name;
 	  XFREE (concat_name);
 	}
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
     }
 #endif
 
@@ -4679,7 +6057,7 @@
 	      for (q = p; *q; q++)
 		if (IS_PATH_SEPARATOR (*q))
 		  break;
-	      p_len = q - p;
+	      p_len = (size_t) (q - p);
 	      p_next = (*q == '\0' ? q : q + 1);
 	      if (p_len == 0)
 		{
@@ -4798,7 +6176,7 @@
   if (patlen <= len)
     {
       str += len - patlen;
-      if (strcmp (str, pat) == 0)
+      if (STREQ (str, pat))
 	*str = '\0';
     }
   return str;
@@ -4863,7 +6241,7 @@
     char *str = xstrdup (value);
     setenv (name, str, 1);
 #else
-    int len = strlen (name) + 1 + strlen (value) + 1;
+    size_t len = strlen (name) + 1 + strlen (value) + 1;
     char *str = XMALLOC (char, len);
     sprintf (str, "%s=%s", name, value);
     if (putenv (str) != EXIT_SUCCESS)
@@ -4880,8 +6258,8 @@
   char *new_value;
   if (orig_value && *orig_value)
     {
-      int orig_value_len = strlen (orig_value);
-      int add_len = strlen (add);
+      size_t orig_value_len = strlen (orig_value);
+      size_t add_len = strlen (add);
       new_value = XMALLOC (char, add_len + orig_value_len + 1);
       if (to_end)
         {
@@ -4912,10 +6290,10 @@
     {
       char *new_value = lt_extend_str (getenv (name), value, 0);
       /* some systems can't cope with a ':'-terminated path #' */
-      int len = strlen (new_value);
-      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+      size_t len = strlen (new_value);
+      while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
         {
-          new_value[len-1] = '\0';
+          new_value[--len] = '\0';
         }
       lt_setenv (name, new_value);
       XFREE (new_value);
@@ -5082,27 +6460,47 @@
 # True if ARG is an import lib, as indicated by $file_magic_cmd
 func_win32_import_lib_p ()
 {
-    $opt_debug
+    $debug_cmd
+
     case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
     *import*) : ;;
     *) false ;;
     esac
 }
 
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+    $debug_cmd
+
+    case " $compile_command " in
+    *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
+      suncc_use_cstd_abi=no
+      ;;
+    *)
+      suncc_use_cstd_abi=yes
+      ;;
+    esac
+}
+
 # func_mode_link arg...
 func_mode_link ()
 {
-    $opt_debug
+    $debug_cmd
+
     case $host in
     *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
       # It is impossible to link a dll without this setting, and
       # we shouldn't force the makefile maintainer to figure out
-      # which system we are compiling for in order to pass an extra
+      # what system we are compiling for in order to pass an extra
       # flag for every libtool invocation.
       # allow_undefined=no
 
       # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll which has undefined symbols, in which case not
+      # to make a dll that has undefined symbols, in which case not
       # even a static library is built.  For now, we need to specify
       # -no-undefined on the libtool link line when we can be certain
       # that all symbols are satisfied, otherwise we get a static library.
@@ -5146,10 +6544,11 @@
     module=no
     no_install=no
     objs=
+    os2dllname=
     non_pic_objects=
     precious_files_regex=
     prefer_static_libs=no
-    preload=no
+    preload=false
     prev=
     prevarg=
     release=
@@ -5161,7 +6560,7 @@
     vinfo=
     vinfo_number=no
     weak_libs=
-    single_module="${wl}-single_module"
+    single_module=$wl-single_module
     func_infer_tag $base_compile
 
     # We need to know -static, to get the right output filenames.
@@ -5169,15 +6568,15 @@
     do
       case $arg in
       -shared)
-	test "$build_libtool_libs" != yes && \
-	  func_fatal_configuration "can not build a shared library"
+	test yes != "$build_libtool_libs" \
+	  && func_fatal_configuration "cannot build a shared library"
 	build_old_libs=no
 	break
 	;;
       -all-static | -static | -static-libtool-libs)
 	case $arg in
 	-all-static)
-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	  if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
 	    func_warning "complete static linking is impossible in this configuration"
 	  fi
 	  if test -n "$link_static_flag"; then
@@ -5210,7 +6609,7 @@
 
     # Go through the arguments, transforming them on the way.
     while test "$#" -gt 0; do
-      arg="$1"
+      arg=$1
       shift
       func_quote_for_eval "$arg"
       qarg=$func_quote_for_eval_unquoted_result
@@ -5227,21 +6626,21 @@
 
 	case $prev in
 	bindir)
-	  bindir="$arg"
+	  bindir=$arg
 	  prev=
 	  continue
 	  ;;
 	dlfiles|dlprefiles)
-	  if test "$preload" = no; then
+	  $preload || {
 	    # Add the symbol object into the linking commands.
 	    func_append compile_command " @SYMFILE@"
 	    func_append finalize_command " @SYMFILE@"
-	    preload=yes
-	  fi
+	    preload=:
+	  }
 	  case $arg in
 	  *.la | *.lo) ;;  # We handle these cases below.
 	  force)
-	    if test "$dlself" = no; then
+	    if test no = "$dlself"; then
 	      dlself=needless
 	      export_dynamic=yes
 	    fi
@@ -5249,9 +6648,9 @@
 	    continue
 	    ;;
 	  self)
-	    if test "$prev" = dlprefiles; then
+	    if test dlprefiles = "$prev"; then
 	      dlself=yes
-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	    elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
 	      dlself=yes
 	    else
 	      dlself=needless
@@ -5261,7 +6660,7 @@
 	    continue
 	    ;;
 	  *)
-	    if test "$prev" = dlfiles; then
+	    if test dlfiles = "$prev"; then
 	      func_append dlfiles " $arg"
 	    else
 	      func_append dlprefiles " $arg"
@@ -5272,14 +6671,14 @@
 	  esac
 	  ;;
 	expsyms)
-	  export_symbols="$arg"
+	  export_symbols=$arg
 	  test -f "$arg" \
-	    || func_fatal_error "symbol file \`$arg' does not exist"
+	    || func_fatal_error "symbol file '$arg' does not exist"
 	  prev=
 	  continue
 	  ;;
 	expsyms_regex)
-	  export_symbols_regex="$arg"
+	  export_symbols_regex=$arg
 	  prev=
 	  continue
 	  ;;
@@ -5297,7 +6696,13 @@
 	  continue
 	  ;;
 	inst_prefix)
-	  inst_prefix_dir="$arg"
+	  inst_prefix_dir=$arg
+	  prev=
+	  continue
+	  ;;
+	mllvm)
+	  # Clang does not use LLVM to link, so we can simply discard any
+	  # '-mllvm $arg' options when doing the link step.
 	  prev=
 	  continue
 	  ;;
@@ -5321,21 +6726,21 @@
 
 		if test -z "$pic_object" ||
 		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none &&
-		   test "$non_pic_object" = none; then
-		  func_fatal_error "cannot find name of object for \`$arg'"
+		   test none = "$pic_object" &&
+		   test none = "$non_pic_object"; then
+		  func_fatal_error "cannot find name of object for '$arg'"
 		fi
 
 		# Extract subdirectory from the argument.
 		func_dirname "$arg" "/" ""
-		xdir="$func_dirname_result"
+		xdir=$func_dirname_result
 
-		if test "$pic_object" != none; then
+		if test none != "$pic_object"; then
 		  # Prepend the subdirectory the object is found in.
-		  pic_object="$xdir$pic_object"
+		  pic_object=$xdir$pic_object
 
-		  if test "$prev" = dlfiles; then
-		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		  if test dlfiles = "$prev"; then
+		    if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
 		      func_append dlfiles " $pic_object"
 		      prev=
 		      continue
@@ -5346,7 +6751,7 @@
 		  fi
 
 		  # CHECK ME:  I think I busted this.  -Ossama
-		  if test "$prev" = dlprefiles; then
+		  if test dlprefiles = "$prev"; then
 		    # Preload the old-style object.
 		    func_append dlprefiles " $pic_object"
 		    prev=
@@ -5354,23 +6759,23 @@
 
 		  # A PIC object.
 		  func_append libobjs " $pic_object"
-		  arg="$pic_object"
+		  arg=$pic_object
 		fi
 
 		# Non-PIC object.
-		if test "$non_pic_object" != none; then
+		if test none != "$non_pic_object"; then
 		  # Prepend the subdirectory the object is found in.
-		  non_pic_object="$xdir$non_pic_object"
+		  non_pic_object=$xdir$non_pic_object
 
 		  # A standard non-PIC object
 		  func_append non_pic_objects " $non_pic_object"
-		  if test -z "$pic_object" || test "$pic_object" = none ; then
-		    arg="$non_pic_object"
+		  if test -z "$pic_object" || test none = "$pic_object"; then
+		    arg=$non_pic_object
 		  fi
 		else
 		  # If the PIC object exists, use it instead.
 		  # $xdir was prepended to $pic_object above.
-		  non_pic_object="$pic_object"
+		  non_pic_object=$pic_object
 		  func_append non_pic_objects " $non_pic_object"
 		fi
 	      else
@@ -5378,7 +6783,7 @@
 		if $opt_dry_run; then
 		  # Extract subdirectory from the argument.
 		  func_dirname "$arg" "/" ""
-		  xdir="$func_dirname_result"
+		  xdir=$func_dirname_result
 
 		  func_lo2o "$arg"
 		  pic_object=$xdir$objdir/$func_lo2o_result
@@ -5386,24 +6791,29 @@
 		  func_append libobjs " $pic_object"
 		  func_append non_pic_objects " $non_pic_object"
 	        else
-		  func_fatal_error "\`$arg' is not a valid libtool object"
+		  func_fatal_error "'$arg' is not a valid libtool object"
 		fi
 	      fi
 	    done
 	  else
-	    func_fatal_error "link input file \`$arg' does not exist"
+	    func_fatal_error "link input file '$arg' does not exist"
 	  fi
 	  arg=$save_arg
 	  prev=
 	  continue
 	  ;;
+	os2dllname)
+	  os2dllname=$arg
+	  prev=
+	  continue
+	  ;;
 	precious_regex)
-	  precious_files_regex="$arg"
+	  precious_files_regex=$arg
 	  prev=
 	  continue
 	  ;;
 	release)
-	  release="-$arg"
+	  release=-$arg
 	  prev=
 	  continue
 	  ;;
@@ -5415,7 +6825,7 @@
 	    func_fatal_error "only absolute run-paths are allowed"
 	    ;;
 	  esac
-	  if test "$prev" = rpath; then
+	  if test rpath = "$prev"; then
 	    case "$rpath " in
 	    *" $arg "*) ;;
 	    *) func_append rpath " $arg" ;;
@@ -5430,7 +6840,7 @@
 	  continue
 	  ;;
 	shrext)
-	  shrext_cmds="$arg"
+	  shrext_cmds=$arg
 	  prev=
 	  continue
 	  ;;
@@ -5470,7 +6880,7 @@
 	esac
       fi # test -n "$prev"
 
-      prevarg="$arg"
+      prevarg=$arg
 
       case $arg in
       -all-static)
@@ -5484,7 +6894,7 @@
 
       -allow-undefined)
 	# FIXME: remove this flag sometime in the future.
-	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+	func_fatal_error "'-allow-undefined' must not be used because it is the default"
 	;;
 
       -avoid-version)
@@ -5516,7 +6926,7 @@
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
 	  func_fatal_error "more than one -exported-symbols argument is not allowed"
 	fi
-	if test "X$arg" = "X-export-symbols"; then
+	if test X-export-symbols = "X$arg"; then
 	  prev=expsyms
 	else
 	  prev=expsyms_regex
@@ -5550,9 +6960,9 @@
 	func_stripname "-L" '' "$arg"
 	if test -z "$func_stripname_result"; then
 	  if test "$#" -gt 0; then
-	    func_fatal_error "require no space between \`-L' and \`$1'"
+	    func_fatal_error "require no space between '-L' and '$1'"
 	  else
-	    func_fatal_error "need path for \`-L' option"
+	    func_fatal_error "need path for '-L' option"
 	  fi
 	fi
 	func_resolve_sysroot "$func_stripname_result"
@@ -5563,8 +6973,8 @@
 	*)
 	  absdir=`cd "$dir" && pwd`
 	  test -z "$absdir" && \
-	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
-	  dir="$absdir"
+	    func_fatal_error "cannot determine absolute directory name of '$dir'"
+	  dir=$absdir
 	  ;;
 	esac
 	case "$deplibs " in
@@ -5599,7 +7009,7 @@
 	;;
 
       -l*)
-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	if test X-lc = "X$arg" || test X-lm = "X$arg"; then
 	  case $host in
 	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
 	    # These systems don't actually have a C or math library (as such)
@@ -5607,11 +7017,11 @@
 	    ;;
 	  *-*-os2*)
 	    # These systems don't actually have a C library (as such)
-	    test "X$arg" = "X-lc" && continue
+	    test X-lc = "X$arg" && continue
 	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
 	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
+	    test X-lc = "X$arg" && continue
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C and math libraries are in the System framework
@@ -5620,16 +7030,16 @@
 	    ;;
 	  *-*-sco3.2v5* | *-*-sco5v6*)
 	    # Causes problems with __ctype
-	    test "X$arg" = "X-lc" && continue
+	    test X-lc = "X$arg" && continue
 	    ;;
 	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
 	    # Compiler inserts libc in the correct place for threads to work
-	    test "X$arg" = "X-lc" && continue
+	    test X-lc = "X$arg" && continue
 	    ;;
 	  esac
-	elif test "X$arg" = "X-lc_r"; then
+	elif test X-lc_r = "X$arg"; then
 	 case $host in
-	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
 	   # Do not include libc_r directly, use -pthread flag.
 	   continue
 	   ;;
@@ -5639,6 +7049,11 @@
 	continue
 	;;
 
+      -mllvm)
+	prev=mllvm
+	continue
+	;;
+
       -module)
 	module=yes
 	continue
@@ -5668,7 +7083,7 @@
 	;;
 
       -multi_module)
-	single_module="${wl}-multi_module"
+	single_module=$wl-multi_module
 	continue
 	;;
 
@@ -5682,8 +7097,8 @@
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
 	  # The PATH hackery in wrapper scripts is required on Windows
 	  # and Darwin in order for the loader to find any dlls it needs.
-	  func_warning "\`-no-install' is ignored for $host"
-	  func_warning "assuming \`-no-fast-install' instead"
+	  func_warning "'-no-install' is ignored for $host"
+	  func_warning "assuming '-no-fast-install' instead"
 	  fast_install=no
 	  ;;
 	*) no_install=yes ;;
@@ -5701,6 +7116,11 @@
 	continue
 	;;
 
+      -os2dllname)
+	prev=os2dllname
+	continue
+	;;
+
       -o) prev=output ;;
 
       -precious-files-regex)
@@ -5788,14 +7208,14 @@
 	func_stripname '-Wc,' '' "$arg"
 	args=$func_stripname_result
 	arg=
-	save_ifs="$IFS"; IFS=','
+	save_ifs=$IFS; IFS=,
 	for flag in $args; do
-	  IFS="$save_ifs"
+	  IFS=$save_ifs
           func_quote_for_eval "$flag"
 	  func_append arg " $func_quote_for_eval_result"
 	  func_append compiler_flags " $func_quote_for_eval_result"
 	done
-	IFS="$save_ifs"
+	IFS=$save_ifs
 	func_stripname ' ' '' "$arg"
 	arg=$func_stripname_result
 	;;
@@ -5804,15 +7224,15 @@
 	func_stripname '-Wl,' '' "$arg"
 	args=$func_stripname_result
 	arg=
-	save_ifs="$IFS"; IFS=','
+	save_ifs=$IFS; IFS=,
 	for flag in $args; do
-	  IFS="$save_ifs"
+	  IFS=$save_ifs
           func_quote_for_eval "$flag"
 	  func_append arg " $wl$func_quote_for_eval_result"
 	  func_append compiler_flags " $wl$func_quote_for_eval_result"
 	  func_append linker_flags " $func_quote_for_eval_result"
 	done
-	IFS="$save_ifs"
+	IFS=$save_ifs
 	func_stripname ' ' '' "$arg"
 	arg=$func_stripname_result
 	;;
@@ -5835,7 +7255,7 @@
       # -msg_* for osf cc
       -msg_*)
 	func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
+	arg=$func_quote_for_eval_result
 	;;
 
       # Flags to be passed through unchanged, with rationale:
@@ -5847,25 +7267,46 @@
       # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
       # -F/path              path to uninstalled frameworks, gcc on darwin
       # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # -fstack-protector*   stack protector flags for GCC
       # @file                GCC response files
       # -tp=*                Portland pgcc target processor selection
       # --sysroot=*          for sysroot support
-      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      # -stdlib=*            select c++ std lib with clang
       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
       -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
-      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+      -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*)
         func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
+	arg=$func_quote_for_eval_result
         func_append compile_command " $arg"
         func_append finalize_command " $arg"
         func_append compiler_flags " $arg"
         continue
         ;;
 
+      -Z*)
+        if test os2 = "`expr $host : '.*\(os2\)'`"; then
+          # OS/2 uses -Zxxx to specify OS/2-specific options
+	  compiler_flags="$compiler_flags $arg"
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  case $arg in
+	  -Zlinker | -Zstack)
+	    prev=xcompiler
+	    ;;
+	  esac
+	  continue
+        else
+	  # Otherwise treat like 'Some other compiler flag' below
+	  func_quote_for_eval "$arg"
+	  arg=$func_quote_for_eval_result
+        fi
+	;;
+
       # Some other compiler flag.
       -* | +*)
         func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
+	arg=$func_quote_for_eval_result
 	;;
 
       *.$objext)
@@ -5886,21 +7327,21 @@
 
 	  if test -z "$pic_object" ||
 	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none &&
-	     test "$non_pic_object" = none; then
-	    func_fatal_error "cannot find name of object for \`$arg'"
+	     test none = "$pic_object" &&
+	     test none = "$non_pic_object"; then
+	    func_fatal_error "cannot find name of object for '$arg'"
 	  fi
 
 	  # Extract subdirectory from the argument.
 	  func_dirname "$arg" "/" ""
-	  xdir="$func_dirname_result"
+	  xdir=$func_dirname_result
 
-	  if test "$pic_object" != none; then
+	  test none = "$pic_object" || {
 	    # Prepend the subdirectory the object is found in.
-	    pic_object="$xdir$pic_object"
+	    pic_object=$xdir$pic_object
 
-	    if test "$prev" = dlfiles; then
-	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+	    if test dlfiles = "$prev"; then
+	      if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
 		func_append dlfiles " $pic_object"
 		prev=
 		continue
@@ -5911,7 +7352,7 @@
 	    fi
 
 	    # CHECK ME:  I think I busted this.  -Ossama
-	    if test "$prev" = dlprefiles; then
+	    if test dlprefiles = "$prev"; then
 	      # Preload the old-style object.
 	      func_append dlprefiles " $pic_object"
 	      prev=
@@ -5919,23 +7360,23 @@
 
 	    # A PIC object.
 	    func_append libobjs " $pic_object"
-	    arg="$pic_object"
-	  fi
+	    arg=$pic_object
+	  }
 
 	  # Non-PIC object.
-	  if test "$non_pic_object" != none; then
+	  if test none != "$non_pic_object"; then
 	    # Prepend the subdirectory the object is found in.
-	    non_pic_object="$xdir$non_pic_object"
+	    non_pic_object=$xdir$non_pic_object
 
 	    # A standard non-PIC object
 	    func_append non_pic_objects " $non_pic_object"
-	    if test -z "$pic_object" || test "$pic_object" = none ; then
-	      arg="$non_pic_object"
+	    if test -z "$pic_object" || test none = "$pic_object"; then
+	      arg=$non_pic_object
 	    fi
 	  else
 	    # If the PIC object exists, use it instead.
 	    # $xdir was prepended to $pic_object above.
-	    non_pic_object="$pic_object"
+	    non_pic_object=$pic_object
 	    func_append non_pic_objects " $non_pic_object"
 	  fi
 	else
@@ -5943,7 +7384,7 @@
 	  if $opt_dry_run; then
 	    # Extract subdirectory from the argument.
 	    func_dirname "$arg" "/" ""
-	    xdir="$func_dirname_result"
+	    xdir=$func_dirname_result
 
 	    func_lo2o "$arg"
 	    pic_object=$xdir$objdir/$func_lo2o_result
@@ -5951,7 +7392,7 @@
 	    func_append libobjs " $pic_object"
 	    func_append non_pic_objects " $non_pic_object"
 	  else
-	    func_fatal_error "\`$arg' is not a valid libtool object"
+	    func_fatal_error "'$arg' is not a valid libtool object"
 	  fi
 	fi
 	;;
@@ -5967,11 +7408,11 @@
 	# A libtool-controlled library.
 
 	func_resolve_sysroot "$arg"
-	if test "$prev" = dlfiles; then
+	if test dlfiles = "$prev"; then
 	  # This library was specified with -dlopen.
 	  func_append dlfiles " $func_resolve_sysroot_result"
 	  prev=
-	elif test "$prev" = dlprefiles; then
+	elif test dlprefiles = "$prev"; then
 	  # The library was specified with -dlpreopen.
 	  func_append dlprefiles " $func_resolve_sysroot_result"
 	  prev=
@@ -5986,7 +7427,7 @@
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.
 	func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
+	arg=$func_quote_for_eval_result
 	;;
       esac # arg
 
@@ -5998,9 +7439,9 @@
     done # argument parsing loop
 
     test -n "$prev" && \
-      func_fatal_help "the \`$prevarg' option requires an argument"
+      func_fatal_help "the '$prevarg' option requires an argument"
 
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+    if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
       eval arg=\"$export_dynamic_flag_spec\"
       func_append compile_command " $arg"
       func_append finalize_command " $arg"
@@ -6009,20 +7450,23 @@
     oldlibs=
     # calculate the name of the file, without its directory
     func_basename "$output"
-    outputname="$func_basename_result"
-    libobjs_save="$libobjs"
+    outputname=$func_basename_result
+    libobjs_save=$libobjs
 
     if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+      eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
     else
       shlib_search_path=
     fi
     eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
     eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
 
+    # Definition is injected by LT_CONFIG during libtool generation.
+    func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
     func_dirname "$output" "/" ""
-    output_objdir="$func_dirname_result$objdir"
+    output_objdir=$func_dirname_result$objdir
     func_to_tool_file "$output_objdir/"
     tool_output_objdir=$func_to_tool_file_result
     # Create the object directory.
@@ -6045,7 +7489,7 @@
     # Find all interdependent deplibs by searching for libraries
     # that are linked more than once (e.g. -la -lb -la)
     for deplib in $deplibs; do
-      if $opt_preserve_dup_deps ; then
+      if $opt_preserve_dup_deps; then
 	case "$libs " in
 	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	esac
@@ -6053,7 +7497,7 @@
       func_append libs " $deplib"
     done
 
-    if test "$linkmode" = lib; then
+    if test lib = "$linkmode"; then
       libs="$predeps $libs $compiler_lib_search_path $postdeps"
 
       # Compute libraries that are listed more than once in $predeps
@@ -6085,7 +7529,7 @@
 	  case $file in
 	  *.la) ;;
 	  *)
-	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+	    func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
 	    ;;
 	  esac
 	done
@@ -6093,7 +7537,7 @@
     prog)
 	compile_deplibs=
 	finalize_deplibs=
-	alldeplibs=no
+	alldeplibs=false
 	newdlfiles=
 	newdlprefiles=
 	passes="conv scan dlopen dlpreopen link"
@@ -6105,29 +7549,29 @@
     for pass in $passes; do
       # The preopen pass in lib mode reverses $deplibs; put it back here
       # so that -L comes before libs that need it for instance...
-      if test "$linkmode,$pass" = "lib,link"; then
+      if test lib,link = "$linkmode,$pass"; then
 	## FIXME: Find the place where the list is rebuilt in the wrong
 	##        order, and fix it there properly
         tmp_deplibs=
 	for deplib in $deplibs; do
 	  tmp_deplibs="$deplib $tmp_deplibs"
 	done
-	deplibs="$tmp_deplibs"
+	deplibs=$tmp_deplibs
       fi
 
-      if test "$linkmode,$pass" = "lib,link" ||
-	 test "$linkmode,$pass" = "prog,scan"; then
-	libs="$deplibs"
+      if test lib,link = "$linkmode,$pass" ||
+	 test prog,scan = "$linkmode,$pass"; then
+	libs=$deplibs
 	deplibs=
       fi
-      if test "$linkmode" = prog; then
+      if test prog = "$linkmode"; then
 	case $pass in
-	dlopen) libs="$dlfiles" ;;
-	dlpreopen) libs="$dlprefiles" ;;
+	dlopen) libs=$dlfiles ;;
+	dlpreopen) libs=$dlprefiles ;;
 	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
 	esac
       fi
-      if test "$linkmode,$pass" = "lib,dlpreopen"; then
+      if test lib,dlpreopen = "$linkmode,$pass"; then
 	# Collect and forward deplibs of preopened libtool libs
 	for lib in $dlprefiles; do
 	  # Ignore non-libtool-libs
@@ -6148,26 +7592,26 @@
 	    esac
 	  done
 	done
-	libs="$dlprefiles"
+	libs=$dlprefiles
       fi
-      if test "$pass" = dlopen; then
+      if test dlopen = "$pass"; then
 	# Collect dlpreopened libraries
-	save_deplibs="$deplibs"
+	save_deplibs=$deplibs
 	deplibs=
       fi
 
       for deplib in $libs; do
 	lib=
-	found=no
+	found=false
 	case $deplib in
 	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
         |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
-	  if test "$linkmode,$pass" = "prog,link"; then
+	  if test prog,link = "$linkmode,$pass"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
 	    func_append compiler_flags " $deplib"
-	    if test "$linkmode" = lib ; then
+	    if test lib = "$linkmode"; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;
 		    * ) func_append new_inherited_linker_flags " $deplib" ;;
@@ -6177,13 +7621,13 @@
 	  continue
 	  ;;
 	-l*)
-	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    func_warning "\`-l' is ignored for archives/objects"
+	  if test lib != "$linkmode" && test prog != "$linkmode"; then
+	    func_warning "'-l' is ignored for archives/objects"
 	    continue
 	  fi
 	  func_stripname '-l' '' "$deplib"
 	  name=$func_stripname_result
-	  if test "$linkmode" = lib; then
+	  if test lib = "$linkmode"; then
 	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
 	  else
 	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
@@ -6191,31 +7635,22 @@
 	  for searchdir in $searchdirs; do
 	    for search_ext in .la $std_shrext .so .a; do
 	      # Search the libtool library
-	      lib="$searchdir/lib${name}${search_ext}"
+	      lib=$searchdir/lib$name$search_ext
 	      if test -f "$lib"; then
-		if test "$search_ext" = ".la"; then
-		  found=yes
+		if test .la = "$search_ext"; then
+		  found=:
 		else
-		  found=no
+		  found=false
 		fi
 		break 2
 	      fi
 	    done
 	  done
-	  if test "$found" != yes; then
-	    # deplib doesn't seem to be a libtool library
-	    if test "$linkmode,$pass" = "prog,link"; then
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      deplibs="$deplib $deplibs"
-	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    continue
-	  else # deplib is a libtool library
+	  if $found; then
+	    # deplib is a libtool library
 	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
 	    # We need to do some special things here, and not later.
-	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    if test yes = "$allow_libtool_libs_with_static_runtimes"; then
 	      case " $predeps $postdeps " in
 	      *" $deplib "*)
 		if func_lalib_p "$lib"; then
@@ -6223,19 +7658,19 @@
 		  old_library=
 		  func_source "$lib"
 		  for l in $old_library $library_names; do
-		    ll="$l"
+		    ll=$l
 		  done
-		  if test "X$ll" = "X$old_library" ; then # only static version available
-		    found=no
+		  if test "X$ll" = "X$old_library"; then # only static version available
+		    found=false
 		    func_dirname "$lib" "" "."
-		    ladir="$func_dirname_result"
+		    ladir=$func_dirname_result
 		    lib=$ladir/$old_library
-		    if test "$linkmode,$pass" = "prog,link"; then
+		    if test prog,link = "$linkmode,$pass"; then
 		      compile_deplibs="$deplib $compile_deplibs"
 		      finalize_deplibs="$deplib $finalize_deplibs"
 		    else
 		      deplibs="$deplib $deplibs"
-		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+		      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
 		    fi
 		    continue
 		  fi
@@ -6244,15 +7679,25 @@
 	      *) ;;
 	      esac
 	    fi
+	  else
+	    # deplib doesn't seem to be a libtool library
+	    if test prog,link = "$linkmode,$pass"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
 	  fi
 	  ;; # -l
 	*.ltframework)
-	  if test "$linkmode,$pass" = "prog,link"; then
+	  if test prog,link = "$linkmode,$pass"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
 	    deplibs="$deplib $deplibs"
-	    if test "$linkmode" = lib ; then
+	    if test lib = "$linkmode"; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;
 		    * ) func_append new_inherited_linker_flags " $deplib" ;;
@@ -6265,18 +7710,18 @@
 	  case $linkmode in
 	  lib)
 	    deplibs="$deplib $deplibs"
-	    test "$pass" = conv && continue
+	    test conv = "$pass" && continue
 	    newdependency_libs="$deplib $newdependency_libs"
 	    func_stripname '-L' '' "$deplib"
 	    func_resolve_sysroot "$func_stripname_result"
 	    func_append newlib_search_path " $func_resolve_sysroot_result"
 	    ;;
 	  prog)
-	    if test "$pass" = conv; then
+	    if test conv = "$pass"; then
 	      deplibs="$deplib $deplibs"
 	      continue
 	    fi
-	    if test "$pass" = scan; then
+	    if test scan = "$pass"; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
@@ -6287,13 +7732,13 @@
 	    func_append newlib_search_path " $func_resolve_sysroot_result"
 	    ;;
 	  *)
-	    func_warning "\`-L' is ignored for archives/objects"
+	    func_warning "'-L' is ignored for archives/objects"
 	    ;;
 	  esac # linkmode
 	  continue
 	  ;; # -L
 	-R*)
-	  if test "$pass" = link; then
+	  if test link = "$pass"; then
 	    func_stripname '-R' '' "$deplib"
 	    func_resolve_sysroot "$func_stripname_result"
 	    dir=$func_resolve_sysroot_result
@@ -6311,7 +7756,7 @@
 	  lib=$func_resolve_sysroot_result
 	  ;;
 	*.$libext)
-	  if test "$pass" = conv; then
+	  if test conv = "$pass"; then
 	    deplibs="$deplib $deplibs"
 	    continue
 	  fi
@@ -6322,21 +7767,26 @@
 	    case " $dlpreconveniencelibs " in
 	    *" $deplib "*) ;;
 	    *)
-	      valid_a_lib=no
+	      valid_a_lib=false
 	      case $deplibs_check_method in
 		match_pattern*)
 		  set dummy $deplibs_check_method; shift
 		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
 		    | $EGREP "$match_pattern_regex" > /dev/null; then
-		    valid_a_lib=yes
+		    valid_a_lib=:
 		  fi
 		;;
 		pass_all)
-		  valid_a_lib=yes
+		  valid_a_lib=:
 		;;
 	      esac
-	      if test "$valid_a_lib" != yes; then
+	      if $valid_a_lib; then
+		echo
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      else
 		echo
 		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
 		echo "*** I have the capability to make that library automatically link in when"
@@ -6344,18 +7794,13 @@
 		echo "*** shared version of the library, which you do not appear to have"
 		echo "*** because the file extensions .$libext of this argument makes me believe"
 		echo "*** that it is just a static archive that I should not use here."
-	      else
-		echo
-		$ECHO "*** Warning: Linking the shared library $output against the"
-		$ECHO "*** static library $deplib is not portable!"
-		deplibs="$deplib $deplibs"
 	      fi
 	      ;;
 	    esac
 	    continue
 	    ;;
 	  prog)
-	    if test "$pass" != link; then
+	    if test link != "$pass"; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
@@ -6366,10 +7811,10 @@
 	  esac # linkmode
 	  ;; # *.$libext
 	*.lo | *.$objext)
-	  if test "$pass" = conv; then
+	  if test conv = "$pass"; then
 	    deplibs="$deplib $deplibs"
-	  elif test "$linkmode" = prog; then
-	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	  elif test prog = "$linkmode"; then
+	    if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
 	      # If there is no dlopen support or we're linking statically,
 	      # we need to preload.
 	      func_append newdlprefiles " $deplib"
@@ -6382,22 +7827,20 @@
 	  continue
 	  ;;
 	%DEPLIBS%)
-	  alldeplibs=yes
+	  alldeplibs=:
 	  continue
 	  ;;
 	esac # case $deplib
 
-	if test "$found" = yes || test -f "$lib"; then :
-	else
-	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
-	fi
+	$found || test -f "$lib" \
+	  || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
 
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$lib" \
-	  || func_fatal_error "\`$lib' is not a valid libtool archive"
+	  || func_fatal_error "'$lib' is not a valid libtool archive"
 
 	func_dirname "$lib" "" "."
-	ladir="$func_dirname_result"
+	ladir=$func_dirname_result
 
 	dlname=
 	dlopen=
@@ -6427,30 +7870,30 @@
 	  done
 	fi
 	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	if test "$linkmode,$pass" = "lib,link" ||
-	   test "$linkmode,$pass" = "prog,scan" ||
-	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+	if test lib,link = "$linkmode,$pass" ||
+	   test prog,scan = "$linkmode,$pass" ||
+	   { test prog != "$linkmode" && test lib != "$linkmode"; }; then
 	  test -n "$dlopen" && func_append dlfiles " $dlopen"
 	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
 	fi
 
-	if test "$pass" = conv; then
+	if test conv = "$pass"; then
 	  # Only check for convenience libraries
 	  deplibs="$lib $deplibs"
 	  if test -z "$libdir"; then
 	    if test -z "$old_library"; then
-	      func_fatal_error "cannot find name of link library for \`$lib'"
+	      func_fatal_error "cannot find name of link library for '$lib'"
 	    fi
 	    # It is a libtool convenience library, so add in its objects.
 	    func_append convenience " $ladir/$objdir/$old_library"
 	    func_append old_convenience " $ladir/$objdir/$old_library"
-	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    func_fatal_error "\`$lib' is not a convenience library"
+	  elif test prog != "$linkmode" && test lib != "$linkmode"; then
+	    func_fatal_error "'$lib' is not a convenience library"
 	  fi
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    deplibs="$deplib $deplibs"
-	    if $opt_preserve_dup_deps ; then
+	    if $opt_preserve_dup_deps; then
 	      case "$tmp_libs " in
 	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	      esac
@@ -6464,26 +7907,26 @@
 	# Get the name of the library we link against.
 	linklib=
 	if test -n "$old_library" &&
-	   { test "$prefer_static_libs" = yes ||
-	     test "$prefer_static_libs,$installed" = "built,no"; }; then
+	   { test yes = "$prefer_static_libs" ||
+	     test built,no = "$prefer_static_libs,$installed"; }; then
 	  linklib=$old_library
 	else
 	  for l in $old_library $library_names; do
-	    linklib="$l"
+	    linklib=$l
 	  done
 	fi
 	if test -z "$linklib"; then
-	  func_fatal_error "cannot find name of link library for \`$lib'"
+	  func_fatal_error "cannot find name of link library for '$lib'"
 	fi
 
 	# This library was specified with -dlopen.
-	if test "$pass" = dlopen; then
-	  if test -z "$libdir"; then
-	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
-	  fi
+	if test dlopen = "$pass"; then
+	  test -z "$libdir" \
+	    && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
 	  if test -z "$dlname" ||
-	     test "$dlopen_support" != yes ||
-	     test "$build_libtool_libs" = no; then
+	     test yes != "$dlopen_support" ||
+	     test no = "$build_libtool_libs"
+	  then
 	    # If there is no dlname, no dlopen support or we're linking
 	    # statically, we need to preload.  We also need to preload any
 	    # dependent libraries so libltdl's deplib preloader doesn't
@@ -6497,40 +7940,40 @@
 
 	# We need an absolute path.
 	case $ladir in
-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
 	*)
 	  abs_ladir=`cd "$ladir" && pwd`
 	  if test -z "$abs_ladir"; then
-	    func_warning "cannot determine absolute directory name of \`$ladir'"
+	    func_warning "cannot determine absolute directory name of '$ladir'"
 	    func_warning "passing it literally to the linker, although it might fail"
-	    abs_ladir="$ladir"
+	    abs_ladir=$ladir
 	  fi
 	  ;;
 	esac
 	func_basename "$lib"
-	laname="$func_basename_result"
+	laname=$func_basename_result
 
 	# Find the relevant object directory and library name.
-	if test "X$installed" = Xyes; then
+	if test yes = "$installed"; then
 	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    func_warning "library \`$lib' was moved."
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    libdir="$abs_ladir"
+	    func_warning "library '$lib' was moved."
+	    dir=$ladir
+	    absdir=$abs_ladir
+	    libdir=$abs_ladir
 	  else
-	    dir="$lt_sysroot$libdir"
-	    absdir="$lt_sysroot$libdir"
+	    dir=$lt_sysroot$libdir
+	    absdir=$lt_sysroot$libdir
 	  fi
-	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+	  test yes = "$hardcode_automatic" && avoidtemprpath=yes
 	else
 	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    dir="$ladir"
-	    absdir="$abs_ladir"
+	    dir=$ladir
+	    absdir=$abs_ladir
 	    # Remove this search path later
 	    func_append notinst_path " $abs_ladir"
 	  else
-	    dir="$ladir/$objdir"
-	    absdir="$abs_ladir/$objdir"
+	    dir=$ladir/$objdir
+	    absdir=$abs_ladir/$objdir
 	    # Remove this search path later
 	    func_append notinst_path " $abs_ladir"
 	  fi
@@ -6539,11 +7982,11 @@
 	name=$func_stripname_result
 
 	# This library was specified with -dlpreopen.
-	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir" && test "$linkmode" = prog; then
-	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+	if test dlpreopen = "$pass"; then
+	  if test -z "$libdir" && test prog = "$linkmode"; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
 	  fi
-	  case "$host" in
+	  case $host in
 	    # special handling for platforms with PE-DLLs.
 	    *cygwin* | *mingw* | *cegcc* )
 	      # Linker will automatically link against shared library if both
@@ -6587,9 +8030,9 @@
 
 	if test -z "$libdir"; then
 	  # Link the convenience library
-	  if test "$linkmode" = lib; then
+	  if test lib = "$linkmode"; then
 	    deplibs="$dir/$old_library $deplibs"
-	  elif test "$linkmode,$pass" = "prog,link"; then
+	  elif test prog,link = "$linkmode,$pass"; then
 	    compile_deplibs="$dir/$old_library $compile_deplibs"
 	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
 	  else
@@ -6599,14 +8042,14 @@
 	fi
 
 
-	if test "$linkmode" = prog && test "$pass" != link; then
+	if test prog = "$linkmode" && test link != "$pass"; then
 	  func_append newlib_search_path " $ladir"
 	  deplibs="$lib $deplibs"
 
-	  linkalldeplibs=no
-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
-	     test "$build_libtool_libs" = no; then
-	    linkalldeplibs=yes
+	  linkalldeplibs=false
+	  if test no != "$link_all_deplibs" || test -z "$library_names" ||
+	     test no = "$build_libtool_libs"; then
+	    linkalldeplibs=:
 	  fi
 
 	  tmp_libs=
@@ -6618,14 +8061,14 @@
 		 ;;
 	    esac
 	    # Need to link against all dependency_libs?
-	    if test "$linkalldeplibs" = yes; then
+	    if $linkalldeplibs; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      # Need to hardcode shared library paths
 	      # or/and link against static libraries
 	      newdependency_libs="$deplib $newdependency_libs"
 	    fi
-	    if $opt_preserve_dup_deps ; then
+	    if $opt_preserve_dup_deps; then
 	      case "$tmp_libs " in
 	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	      esac
@@ -6635,15 +8078,15 @@
 	  continue
 	fi # $linkmode = prog...
 
-	if test "$linkmode,$pass" = "prog,link"; then
+	if test prog,link = "$linkmode,$pass"; then
 	  if test -n "$library_names" &&
-	     { { test "$prefer_static_libs" = no ||
-	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	     { { test no = "$prefer_static_libs" ||
+	         test built,yes = "$prefer_static_libs,$installed"; } ||
 	       test -z "$old_library"; }; then
 	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
 	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath:" in
+	      case $temp_rpath: in
 	      *"$absdir:"*) ;;
 	      *) func_append temp_rpath "$absdir:" ;;
 	      esac
@@ -6672,9 +8115,9 @@
 	    esac
 	  fi # $linkmode,$pass = prog,link...
 
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
+	  if $alldeplibs &&
+	     { test pass_all = "$deplibs_check_method" ||
+	       { test yes = "$build_libtool_libs" &&
 		 test -n "$library_names"; }; }; then
 	    # We only need to search for static libraries
 	    continue
@@ -6683,19 +8126,19 @@
 
 	link_static=no # Whether the deplib will be linked statically
 	use_static_libs=$prefer_static_libs
-	if test "$use_static_libs" = built && test "$installed" = yes; then
+	if test built = "$use_static_libs" && test yes = "$installed"; then
 	  use_static_libs=no
 	fi
 	if test -n "$library_names" &&
-	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+	   { test no = "$use_static_libs" || test -z "$old_library"; }; then
 	  case $host in
-	  *cygwin* | *mingw* | *cegcc*)
+	  *cygwin* | *mingw* | *cegcc* | *os2*)
 	      # No point in relinking DLLs because paths are not encoded
 	      func_append notinst_deplibs " $lib"
 	      need_relink=no
 	    ;;
 	  *)
-	    if test "$installed" = no; then
+	    if test no = "$installed"; then
 	      func_append notinst_deplibs " $lib"
 	      need_relink=yes
 	    fi
@@ -6705,24 +8148,24 @@
 
 	  # Warn about portability, can't link against -module's on some
 	  # systems (darwin).  Don't bleat about dlopened modules though!
-	  dlopenmodule=""
+	  dlopenmodule=
 	  for dlpremoduletest in $dlprefiles; do
 	    if test "X$dlpremoduletest" = "X$lib"; then
-	      dlopenmodule="$dlpremoduletest"
+	      dlopenmodule=$dlpremoduletest
 	      break
 	    fi
 	  done
-	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+	  if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
 	    echo
-	    if test "$linkmode" = prog; then
+	    if test prog = "$linkmode"; then
 	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
 	    else
 	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
 	    fi
 	    $ECHO "*** $linklib is not portable!"
 	  fi
-	  if test "$linkmode" = lib &&
-	     test "$hardcode_into_libs" = yes; then
+	  if test lib = "$linkmode" &&
+	     test yes = "$hardcode_into_libs"; then
 	    # Hardcode the library path.
 	    # Skip directories that are in the system default run-time
 	    # search path.
@@ -6750,43 +8193,43 @@
 	    # figure out the soname
 	    set dummy $library_names
 	    shift
-	    realname="$1"
+	    realname=$1
 	    shift
 	    libname=`eval "\\$ECHO \"$libname_spec\""`
 	    # use dlname if we got it. it's perfectly good, no?
 	    if test -n "$dlname"; then
-	      soname="$dlname"
+	      soname=$dlname
 	    elif test -n "$soname_spec"; then
 	      # bleh windows
 	      case $host in
-	      *cygwin* | mingw* | *cegcc*)
+	      *cygwin* | mingw* | *cegcc* | *os2*)
 	        func_arith $current - $age
 		major=$func_arith_result
-		versuffix="-$major"
+		versuffix=-$major
 		;;
 	      esac
 	      eval soname=\"$soname_spec\"
 	    else
-	      soname="$realname"
+	      soname=$realname
 	    fi
 
 	    # Make a new name for the extract_expsyms_cmds to use
-	    soroot="$soname"
+	    soroot=$soname
 	    func_basename "$soroot"
-	    soname="$func_basename_result"
+	    soname=$func_basename_result
 	    func_stripname 'lib' '.dll' "$soname"
 	    newlib=libimp-$func_stripname_result.a
 
 	    # If the library has no export list, then create one now
 	    if test -f "$output_objdir/$soname-def"; then :
 	    else
-	      func_verbose "extracting exported symbol list from \`$soname'"
+	      func_verbose "extracting exported symbol list from '$soname'"
 	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
 	    fi
 
 	    # Create $newlib
 	    if test -f "$output_objdir/$newlib"; then :; else
-	      func_verbose "generating import library for \`$soname'"
+	      func_verbose "generating import library for '$soname'"
 	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
 	    fi
 	    # make sure the library variables are pointing to the new library
@@ -6794,58 +8237,58 @@
 	    linklib=$newlib
 	  fi # test -n "$old_archive_from_expsyms_cmds"
 
-	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
+	  if test prog = "$linkmode" || test relink != "$opt_mode"; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
 	    lib_linked=yes
 	    case $hardcode_action in
 	    immediate | unsupported)
-	      if test "$hardcode_direct" = no; then
-		add="$dir/$linklib"
+	      if test no = "$hardcode_direct"; then
+		add=$dir/$linklib
 		case $host in
-		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
-		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
+		  *-*-sysv4*uw2*) add_dir=-L$dir ;;
 		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
-		    *-*-unixware7*) add_dir="-L$dir" ;;
+		    *-*-unixware7*) add_dir=-L$dir ;;
 		  *-*-darwin* )
-		    # if the lib is a (non-dlopened) module then we can not
+		    # if the lib is a (non-dlopened) module then we cannot
 		    # link against it, someone is ignoring the earlier warnings
 		    if /usr/bin/file -L $add 2> /dev/null |
-			 $GREP ": [^:]* bundle" >/dev/null ; then
+			 $GREP ": [^:]* bundle" >/dev/null; then
 		      if test "X$dlopenmodule" != "X$lib"; then
 			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
-			if test -z "$old_library" ; then
+			if test -z "$old_library"; then
 			  echo
 			  echo "*** And there doesn't seem to be a static archive available"
 			  echo "*** The link will probably fail, sorry"
 			else
-			  add="$dir/$old_library"
+			  add=$dir/$old_library
 			fi
 		      elif test -n "$old_library"; then
-			add="$dir/$old_library"
+			add=$dir/$old_library
 		      fi
 		    fi
 		esac
-	      elif test "$hardcode_minus_L" = no; then
+	      elif test no = "$hardcode_minus_L"; then
 		case $host in
-		*-*-sunos*) add_shlibpath="$dir" ;;
+		*-*-sunos*) add_shlibpath=$dir ;;
 		esac
-		add_dir="-L$dir"
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = no; then
-		add_shlibpath="$dir"
-		add="-l$name"
+		add_dir=-L$dir
+		add=-l$name
+	      elif test no = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
 	      else
 		lib_linked=no
 	      fi
 	      ;;
 	    relink)
-	      if test "$hardcode_direct" = yes &&
-	         test "$hardcode_direct_absolute" = no; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$absdir"
+	      if test yes = "$hardcode_direct" &&
+	         test no = "$hardcode_direct_absolute"; then
+		add=$dir/$linklib
+	      elif test yes = "$hardcode_minus_L"; then
+		add_dir=-L$absdir
 		# Try looking first in the location we're being installed to.
 		if test -n "$inst_prefix_dir"; then
 		  case $libdir in
@@ -6854,10 +8297,10 @@
 		      ;;
 		  esac
 		fi
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = yes; then
-		add_shlibpath="$dir"
-		add="-l$name"
+		add=-l$name
+	      elif test yes = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
 	      else
 		lib_linked=no
 	      fi
@@ -6865,7 +8308,7 @@
 	    *) lib_linked=no ;;
 	    esac
 
-	    if test "$lib_linked" != yes; then
+	    if test yes != "$lib_linked"; then
 	      func_fatal_configuration "unsupported hardcode properties"
 	    fi
 
@@ -6875,15 +8318,15 @@
 	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
 	      esac
 	    fi
-	    if test "$linkmode" = prog; then
+	    if test prog = "$linkmode"; then
 	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
 	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
 	    else
 	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
 	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes &&
-		 test "$hardcode_minus_L" != yes &&
-		 test "$hardcode_shlibpath_var" = yes; then
+	      if test yes != "$hardcode_direct" &&
+		 test yes != "$hardcode_minus_L" &&
+		 test yes = "$hardcode_shlibpath_var"; then
 		case :$finalize_shlibpath: in
 		*":$libdir:"*) ;;
 		*) func_append finalize_shlibpath "$libdir:" ;;
@@ -6892,33 +8335,33 @@
 	    fi
 	  fi
 
-	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
+	  if test prog = "$linkmode" || test relink = "$opt_mode"; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
 	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes &&
-	       test "$hardcode_direct_absolute" = no; then
-	      add="$libdir/$linklib"
-	    elif test "$hardcode_minus_L" = yes; then
-	      add_dir="-L$libdir"
-	      add="-l$name"
-	    elif test "$hardcode_shlibpath_var" = yes; then
+	    if test yes = "$hardcode_direct" &&
+	       test no = "$hardcode_direct_absolute"; then
+	      add=$libdir/$linklib
+	    elif test yes = "$hardcode_minus_L"; then
+	      add_dir=-L$libdir
+	      add=-l$name
+	    elif test yes = "$hardcode_shlibpath_var"; then
 	      case :$finalize_shlibpath: in
 	      *":$libdir:"*) ;;
 	      *) func_append finalize_shlibpath "$libdir:" ;;
 	      esac
-	      add="-l$name"
-	    elif test "$hardcode_automatic" = yes; then
+	      add=-l$name
+	    elif test yes = "$hardcode_automatic"; then
 	      if test -n "$inst_prefix_dir" &&
-		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
-		add="$inst_prefix_dir$libdir/$linklib"
+		 test -f "$inst_prefix_dir$libdir/$linklib"; then
+		add=$inst_prefix_dir$libdir/$linklib
 	      else
-		add="$libdir/$linklib"
+		add=$libdir/$linklib
 	      fi
 	    else
 	      # We cannot seem to hardcode it, guess we'll fake it.
-	      add_dir="-L$libdir"
+	      add_dir=-L$libdir
 	      # Try looking first in the location we're being installed to.
 	      if test -n "$inst_prefix_dir"; then
 		case $libdir in
@@ -6927,10 +8370,10 @@
 		    ;;
 		esac
 	      fi
-	      add="-l$name"
+	      add=-l$name
 	    fi
 
-	    if test "$linkmode" = prog; then
+	    if test prog = "$linkmode"; then
 	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
 	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
 	    else
@@ -6938,43 +8381,43 @@
 	      test -n "$add" && deplibs="$add $deplibs"
 	    fi
 	  fi
-	elif test "$linkmode" = prog; then
+	elif test prog = "$linkmode"; then
 	  # Here we assume that one of hardcode_direct or hardcode_minus_L
 	  # is not unsupported.  This is valid on all known static and
 	  # shared platforms.
-	  if test "$hardcode_direct" != unsupported; then
-	    test -n "$old_library" && linklib="$old_library"
+	  if test unsupported != "$hardcode_direct"; then
+	    test -n "$old_library" && linklib=$old_library
 	    compile_deplibs="$dir/$linklib $compile_deplibs"
 	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
 	  else
 	    compile_deplibs="-l$name -L$dir $compile_deplibs"
 	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
 	  fi
-	elif test "$build_libtool_libs" = yes; then
+	elif test yes = "$build_libtool_libs"; then
 	  # Not a shared library
-	  if test "$deplibs_check_method" != pass_all; then
+	  if test pass_all != "$deplibs_check_method"; then
 	    # We're trying link a shared library against a static one
 	    # but the system doesn't support it.
 
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.
 	    echo
-	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
+	    $ECHO "*** Warning: This system cannot link to static lib archive $lib."
 	    echo "*** I have the capability to make that library automatically link in when"
 	    echo "*** you link to this library.  But I can only do this if you have a"
 	    echo "*** shared version of the library, which you do not appear to have."
-	    if test "$module" = yes; then
+	    if test yes = "$module"; then
 	      echo "*** But as you try to build a module library, libtool will still create "
 	      echo "*** a static module, that should work as long as the dlopening application"
 	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
 	      if test -z "$global_symbol_pipe"; then
 		echo
 		echo "*** However, this would only work if libtool was able to extract symbol"
-		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
 		echo "*** not find such a program.  So, this module is probably useless."
-		echo "*** \`nm' from GNU binutils and a full rebuild may help."
+		echo "*** 'nm' from GNU binutils and a full rebuild may help."
 	      fi
-	      if test "$build_old_libs" = no; then
+	      if test no = "$build_old_libs"; then
 		build_libtool_libs=module
 		build_old_libs=yes
 	      else
@@ -6987,11 +8430,11 @@
 	  fi
 	fi # link shared/static library?
 
-	if test "$linkmode" = lib; then
+	if test lib = "$linkmode"; then
 	  if test -n "$dependency_libs" &&
-	     { test "$hardcode_into_libs" != yes ||
-	       test "$build_old_libs" = yes ||
-	       test "$link_static" = yes; }; then
+	     { test yes != "$hardcode_into_libs" ||
+	       test yes = "$build_old_libs" ||
+	       test yes = "$link_static"; }; then
 	    # Extract -R from dependency_libs
 	    temp_deplibs=
 	    for libdir in $dependency_libs; do
@@ -7005,12 +8448,12 @@
 	      *) func_append temp_deplibs " $libdir";;
 	      esac
 	    done
-	    dependency_libs="$temp_deplibs"
+	    dependency_libs=$temp_deplibs
 	  fi
 
 	  func_append newlib_search_path " $absdir"
 	  # Link against this library
-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
 	  # ... and its dependency_libs
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
@@ -7020,7 +8463,7 @@
                    func_resolve_sysroot "$func_stripname_result";;
               *) func_resolve_sysroot "$deplib" ;;
             esac
-	    if $opt_preserve_dup_deps ; then
+	    if $opt_preserve_dup_deps; then
 	      case "$tmp_libs " in
 	      *" $func_resolve_sysroot_result "*)
                 func_append specialdeplibs " $func_resolve_sysroot_result" ;;
@@ -7029,12 +8472,12 @@
 	    func_append tmp_libs " $func_resolve_sysroot_result"
 	  done
 
-	  if test "$link_all_deplibs" != no; then
+	  if test no != "$link_all_deplibs"; then
 	    # Add the search paths of all dependency libraries
 	    for deplib in $dependency_libs; do
 	      path=
 	      case $deplib in
-	      -L*) path="$deplib" ;;
+	      -L*) path=$deplib ;;
 	      *.la)
 	        func_resolve_sysroot "$deplib"
 	        deplib=$func_resolve_sysroot_result
@@ -7042,12 +8485,12 @@
 		dir=$func_dirname_result
 		# We need an absolute path.
 		case $dir in
-		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		[\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
 		*)
 		  absdir=`cd "$dir" && pwd`
 		  if test -z "$absdir"; then
-		    func_warning "cannot determine absolute directory name of \`$dir'"
-		    absdir="$dir"
+		    func_warning "cannot determine absolute directory name of '$dir'"
+		    absdir=$dir
 		  fi
 		  ;;
 		esac
@@ -7055,35 +8498,35 @@
 		case $host in
 		*-*-darwin*)
 		  depdepl=
-		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-		  if test -n "$deplibrary_names" ; then
-		    for tmp in $deplibrary_names ; do
+		  eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names"; then
+		    for tmp in $deplibrary_names; do
 		      depdepl=$tmp
 		    done
-		    if test -f "$absdir/$objdir/$depdepl" ; then
-		      depdepl="$absdir/$objdir/$depdepl"
-		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+		    if test -f "$absdir/$objdir/$depdepl"; then
+		      depdepl=$absdir/$objdir/$depdepl
+		      darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
                       if test -z "$darwin_install_name"; then
-                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                          darwin_install_name=`$OTOOL64 -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
                       fi
-		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
-		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+		      func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
+		      func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
 		      path=
 		    fi
 		  fi
 		  ;;
 		*)
-		  path="-L$absdir/$objdir"
+		  path=-L$absdir/$objdir
 		  ;;
 		esac
 		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 		  test -z "$libdir" && \
-		    func_fatal_error "\`$deplib' is not a valid libtool archive"
+		    func_fatal_error "'$deplib' is not a valid libtool archive"
 		  test "$absdir" != "$libdir" && \
-		    func_warning "\`$deplib' seems to be moved"
+		    func_warning "'$deplib' seems to be moved"
 
-		  path="-L$absdir"
+		  path=-L$absdir
 		fi
 		;;
 	      esac
@@ -7095,23 +8538,23 @@
 	  fi # link_all_deplibs != no
 	fi # linkmode = lib
       done # for deplib in $libs
-      if test "$pass" = link; then
-	if test "$linkmode" = "prog"; then
+      if test link = "$pass"; then
+	if test prog = "$linkmode"; then
 	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
 	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
 	else
 	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	fi
       fi
-      dependency_libs="$newdependency_libs"
-      if test "$pass" = dlpreopen; then
+      dependency_libs=$newdependency_libs
+      if test dlpreopen = "$pass"; then
 	# Link the dlpreopened libraries before other libraries
 	for deplib in $save_deplibs; do
 	  deplibs="$deplib $deplibs"
 	done
       fi
-      if test "$pass" != dlopen; then
-	if test "$pass" != conv; then
+      if test dlopen != "$pass"; then
+	test conv = "$pass" || {
 	  # Make sure lib_search_path contains only unique directories.
 	  lib_search_path=
 	  for dir in $newlib_search_path; do
@@ -7121,12 +8564,12 @@
 	    esac
 	  done
 	  newlib_search_path=
-	fi
+	}
 
-	if test "$linkmode,$pass" != "prog,link"; then
-	  vars="deplibs"
-	else
+	if test prog,link = "$linkmode,$pass"; then
 	  vars="compile_deplibs finalize_deplibs"
+	else
+	  vars=deplibs
 	fi
 	for var in $vars dependency_libs; do
 	  # Add libraries to $var in reverse order
@@ -7184,62 +8627,93 @@
 	  eval $var=\"$tmp_libs\"
 	done # for var
       fi
+
+      # Add Sun CC postdeps if required:
+      test CXX = "$tagname" && {
+        case $host_os in
+        linux*)
+          case `$CC -V 2>&1 | sed 5q` in
+          *Sun\ C*) # Sun C++ 5.9
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+
+        solaris*)
+          func_cc_basename "$CC"
+          case $func_cc_basename_result in
+          CC* | sunCC*)
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+        esac
+      }
+
       # Last step: remove runtime libs from dependency_libs
       # (they stay in deplibs)
       tmp_libs=
-      for i in $dependency_libs ; do
+      for i in $dependency_libs; do
 	case " $predeps $postdeps $compiler_lib_search_path " in
 	*" $i "*)
-	  i=""
+	  i=
 	  ;;
 	esac
-	if test -n "$i" ; then
+	if test -n "$i"; then
 	  func_append tmp_libs " $i"
 	fi
       done
       dependency_libs=$tmp_libs
     done # for pass
-    if test "$linkmode" = prog; then
-      dlfiles="$newdlfiles"
+    if test prog = "$linkmode"; then
+      dlfiles=$newdlfiles
     fi
-    if test "$linkmode" = prog || test "$linkmode" = lib; then
-      dlprefiles="$newdlprefiles"
+    if test prog = "$linkmode" || test lib = "$linkmode"; then
+      dlprefiles=$newdlprefiles
     fi
 
     case $linkmode in
     oldlib)
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	func_warning "\`-dlopen' is ignored for archives"
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for archives"
       fi
 
       case " $deplibs" in
       *\ -l* | *\ -L*)
-	func_warning "\`-l' and \`-L' are ignored for archives" ;;
+	func_warning "'-l' and '-L' are ignored for archives" ;;
       esac
 
       test -n "$rpath" && \
-	func_warning "\`-rpath' is ignored for archives"
+	func_warning "'-rpath' is ignored for archives"
 
       test -n "$xrpath" && \
-	func_warning "\`-R' is ignored for archives"
+	func_warning "'-R' is ignored for archives"
 
       test -n "$vinfo" && \
-	func_warning "\`-version-info/-version-number' is ignored for archives"
+	func_warning "'-version-info/-version-number' is ignored for archives"
 
       test -n "$release" && \
-	func_warning "\`-release' is ignored for archives"
+	func_warning "'-release' is ignored for archives"
 
       test -n "$export_symbols$export_symbols_regex" && \
-	func_warning "\`-export-symbols' is ignored for archives"
+	func_warning "'-export-symbols' is ignored for archives"
 
       # Now set the variables for building old libraries.
       build_libtool_libs=no
-      oldlibs="$output"
+      oldlibs=$output
       func_append objs "$old_deplibs"
       ;;
 
     lib)
-      # Make sure we only generate libraries of the form `libNAME.la'.
+      # Make sure we only generate libraries of the form 'libNAME.la'.
       case $outputname in
       lib*)
 	func_stripname 'lib' '.la' "$outputname"
@@ -7248,10 +8722,10 @@
 	eval libname=\"$libname_spec\"
 	;;
       *)
-	test "$module" = no && \
-	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
+	test no = "$module" \
+	  && func_fatal_help "libtool library '$output' must begin with 'lib'"
 
-	if test "$need_lib_prefix" != no; then
+	if test no != "$need_lib_prefix"; then
 	  # Add the "lib" prefix for modules if required
 	  func_stripname '' '.la' "$outputname"
 	  name=$func_stripname_result
@@ -7265,8 +8739,8 @@
       esac
 
       if test -n "$objs"; then
-	if test "$deplibs_check_method" != pass_all; then
-	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+	if test pass_all != "$deplibs_check_method"; then
+	  func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
 	else
 	  echo
 	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
@@ -7275,21 +8749,21 @@
 	fi
       fi
 
-      test "$dlself" != no && \
-	func_warning "\`-dlopen self' is ignored for libtool libraries"
+      test no = "$dlself" \
+	|| func_warning "'-dlopen self' is ignored for libtool libraries"
 
       set dummy $rpath
       shift
-      test "$#" -gt 1 && \
-	func_warning "ignoring multiple \`-rpath's for a libtool library"
+      test 1 -lt "$#" \
+	&& func_warning "ignoring multiple '-rpath's for a libtool library"
 
-      install_libdir="$1"
+      install_libdir=$1
 
       oldlibs=
       if test -z "$rpath"; then
-	if test "$build_libtool_libs" = yes; then
+	if test yes = "$build_libtool_libs"; then
 	  # Building a libtool convenience library.
-	  # Some compilers have problems with a `.al' extension so
+	  # Some compilers have problems with a '.al' extension so
 	  # convenience libraries should have the same extension an
 	  # archive normally would.
 	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
@@ -7298,20 +8772,20 @@
 	fi
 
 	test -n "$vinfo" && \
-	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+	  func_warning "'-version-info/-version-number' is ignored for convenience libraries"
 
 	test -n "$release" && \
-	  func_warning "\`-release' is ignored for convenience libraries"
+	  func_warning "'-release' is ignored for convenience libraries"
       else
 
 	# Parse the version information argument.
-	save_ifs="$IFS"; IFS=':'
+	save_ifs=$IFS; IFS=:
 	set dummy $vinfo 0 0 0
 	shift
-	IFS="$save_ifs"
+	IFS=$save_ifs
 
 	test -n "$7" && \
-	  func_fatal_help "too many parameters to \`-version-info'"
+	  func_fatal_help "too many parameters to '-version-info'"
 
 	# convert absolute version numbers to libtool ages
 	# this retains compatibility with .la files and attempts
@@ -7319,42 +8793,42 @@
 
 	case $vinfo_number in
 	yes)
-	  number_major="$1"
-	  number_minor="$2"
-	  number_revision="$3"
+	  number_major=$1
+	  number_minor=$2
+	  number_revision=$3
 	  #
 	  # There are really only two kinds -- those that
 	  # use the current revision as the major version
 	  # and those that subtract age and use age as
 	  # a minor version.  But, then there is irix
-	  # which has an extra 1 added just for fun
+	  # that has an extra 1 added just for fun
 	  #
 	  case $version_type in
 	  # correct linux to gnu/linux during the next big refactor
-	  darwin|linux|osf|windows|none)
+	  darwin|freebsd-elf|linux|osf|windows|none)
 	    func_arith $number_major + $number_minor
 	    current=$func_arith_result
-	    age="$number_minor"
-	    revision="$number_revision"
+	    age=$number_minor
+	    revision=$number_revision
 	    ;;
-	  freebsd-aout|freebsd-elf|qnx|sunos)
-	    current="$number_major"
-	    revision="$number_minor"
-	    age="0"
+	  freebsd-aout|qnx|sunos)
+	    current=$number_major
+	    revision=$number_minor
+	    age=0
 	    ;;
 	  irix|nonstopux)
 	    func_arith $number_major + $number_minor
 	    current=$func_arith_result
-	    age="$number_minor"
-	    revision="$number_minor"
+	    age=$number_minor
+	    revision=$number_minor
 	    lt_irix_increment=no
 	    ;;
 	  esac
 	  ;;
 	no)
-	  current="$1"
-	  revision="$2"
-	  age="$3"
+	  current=$1
+	  revision=$2
+	  age=$3
 	  ;;
 	esac
 
@@ -7362,30 +8836,30 @@
 	case $current in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  func_error "CURRENT \`$current' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
+	  func_error "CURRENT '$current' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	case $revision in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  func_error "REVISION \`$revision' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
+	  func_error "REVISION '$revision' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	case $age in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  func_error "AGE \`$age' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
+	  func_error "AGE '$age' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
 	  ;;
 	esac
 
 	if test "$age" -gt "$current"; then
-	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
-	  func_fatal_error "\`$vinfo' is not valid version information"
+	  func_error "AGE '$age' is greater than the current interface number '$current'"
+	  func_fatal_error "'$vinfo' is not valid version information"
 	fi
 
 	# Calculate the version variables.
@@ -7400,26 +8874,36 @@
 	  # verstring for coding it into the library header
 	  func_arith $current - $age
 	  major=.$func_arith_result
-	  versuffix="$major.$age.$revision"
+	  versuffix=$major.$age.$revision
 	  # Darwin ld doesn't like 0 for these options...
 	  func_arith $current + 1
 	  minor_current=$func_arith_result
-	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
 	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+          # On Darwin other compilers
+          case $CC in
+              nagfor*)
+                  verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+                  ;;
+              *)
+                  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+                  ;;
+          esac
 	  ;;
 
 	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
+	  major=.$current
+	  versuffix=.$current.$revision
 	  ;;
 
 	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current"
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
 	  ;;
 
 	irix | nonstopux)
-	  if test "X$lt_irix_increment" = "Xno"; then
+	  if test no = "$lt_irix_increment"; then
 	    func_arith $current - $age
 	  else
 	    func_arith $current - $age + 1
@@ -7430,69 +8914,74 @@
 	    nonstopux) verstring_prefix=nonstopux ;;
 	    *)         verstring_prefix=sgi ;;
 	  esac
-	  verstring="$verstring_prefix$major.$revision"
+	  verstring=$verstring_prefix$major.$revision
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$revision
-	  while test "$loop" -ne 0; do
+	  while test 0 -ne "$loop"; do
 	    func_arith $revision - $loop
 	    iface=$func_arith_result
 	    func_arith $loop - 1
 	    loop=$func_arith_result
-	    verstring="$verstring_prefix$major.$iface:$verstring"
+	    verstring=$verstring_prefix$major.$iface:$verstring
 	  done
 
-	  # Before this point, $major must not contain `.'.
+	  # Before this point, $major must not contain '.'.
 	  major=.$major
-	  versuffix="$major.$revision"
+	  versuffix=$major.$revision
 	  ;;
 
 	linux) # correct to gnu/linux during the next big refactor
 	  func_arith $current - $age
 	  major=.$func_arith_result
-	  versuffix="$major.$age.$revision"
+	  versuffix=$major.$age.$revision
 	  ;;
 
 	osf)
 	  func_arith $current - $age
 	  major=.$func_arith_result
-	  versuffix=".$current.$age.$revision"
-	  verstring="$current.$age.$revision"
+	  versuffix=.$current.$age.$revision
+	  verstring=$current.$age.$revision
 
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$age
-	  while test "$loop" -ne 0; do
+	  while test 0 -ne "$loop"; do
 	    func_arith $current - $loop
 	    iface=$func_arith_result
 	    func_arith $loop - 1
 	    loop=$func_arith_result
-	    verstring="$verstring:${iface}.0"
+	    verstring=$verstring:$iface.0
 	  done
 
 	  # Make executables depend on our current version.
-	  func_append verstring ":${current}.0"
+	  func_append verstring ":$current.0"
 	  ;;
 
 	qnx)
-	  major=".$current"
-	  versuffix=".$current"
+	  major=.$current
+	  versuffix=.$current
+	  ;;
+
+	sco)
+	  major=.$current
+	  versuffix=.$current
 	  ;;
 
 	sunos)
-	  major=".$current"
-	  versuffix=".$current.$revision"
+	  major=.$current
+	  versuffix=.$current.$revision
 	  ;;
 
 	windows)
 	  # Use '-' rather than '.', since we only want one
-	  # extension on DOS 8.3 filesystems.
+	  # extension on DOS 8.3 file systems.
 	  func_arith $current - $age
 	  major=$func_arith_result
-	  versuffix="-$major"
+	  versuffix=-$major
 	  ;;
 
 	*)
-	  func_fatal_configuration "unknown library version type \`$version_type'"
+	  func_fatal_configuration "unknown library version type '$version_type'"
 	  ;;
 	esac
 
@@ -7506,42 +8995,45 @@
 	    verstring=
 	    ;;
 	  *)
-	    verstring="0.0"
+	    verstring=0.0
 	    ;;
 	  esac
-	  if test "$need_version" = no; then
+	  if test no = "$need_version"; then
 	    versuffix=
 	  else
-	    versuffix=".0.0"
+	    versuffix=.0.0
 	  fi
 	fi
 
 	# Remove version info from name if versioning should be avoided
-	if test "$avoid_version" = yes && test "$need_version" = no; then
+	if test yes,no = "$avoid_version,$need_version"; then
 	  major=
 	  versuffix=
-	  verstring=""
+	  verstring=
 	fi
 
 	# Check to see if the archive will have undefined symbols.
-	if test "$allow_undefined" = yes; then
-	  if test "$allow_undefined_flag" = unsupported; then
-	    func_warning "undefined symbols not allowed in $host shared libraries"
-	    build_libtool_libs=no
-	    build_old_libs=yes
+	if test yes = "$allow_undefined"; then
+	  if test unsupported = "$allow_undefined_flag"; then
+	    if test yes = "$build_old_libs"; then
+	      func_warning "undefined symbols not allowed in $host shared libraries; building static only"
+	      build_libtool_libs=no
+	    else
+	      func_fatal_error "can't build $host shared library unless -no-undefined is specified"
+	    fi
 	  fi
 	else
 	  # Don't allow undefined symbols.
-	  allow_undefined_flag="$no_undefined_flag"
+	  allow_undefined_flag=$no_undefined_flag
 	fi
 
       fi
 
-      func_generate_dlsyms "$libname" "$libname" "yes"
+      func_generate_dlsyms "$libname" "$libname" :
       func_append libobjs " $symfileobj"
-      test "X$libobjs" = "X " && libobjs=
+      test " " = "$libobjs" && libobjs=
 
-      if test "$opt_mode" != relink; then
+      if test relink != "$opt_mode"; then
 	# Remove our outputs, but don't remove object files since they
 	# may have been created when compiling PIC objects.
 	removelist=
@@ -7550,8 +9042,8 @@
 	  case $p in
 	    *.$objext | *.gcno)
 	       ;;
-	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-	       if test "X$precious_files_regex" != "X"; then
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
+	       if test -n "$precious_files_regex"; then
 		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
 		 then
 		   continue
@@ -7567,11 +9059,11 @@
       fi
 
       # Now set the variables for building old libraries.
-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+      if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
 	func_append oldlibs " $output_objdir/$libname.$libext"
 
 	# Transform .lo files to .o files.
-	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
       fi
 
       # Eliminate all temporary directories.
@@ -7592,13 +9084,13 @@
 	  *) func_append finalize_rpath " $libdir" ;;
 	  esac
 	done
-	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+	if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
 	  dependency_libs="$temp_xrpath $dependency_libs"
 	fi
       fi
 
       # Make sure dlfiles contains only unique files that won't be dlpreopened
-      old_dlfiles="$dlfiles"
+      old_dlfiles=$dlfiles
       dlfiles=
       for lib in $old_dlfiles; do
 	case " $dlprefiles $dlfiles " in
@@ -7608,7 +9100,7 @@
       done
 
       # Make sure dlprefiles contains only unique files
-      old_dlprefiles="$dlprefiles"
+      old_dlprefiles=$dlprefiles
       dlprefiles=
       for lib in $old_dlprefiles; do
 	case "$dlprefiles " in
@@ -7617,7 +9109,7 @@
 	esac
       done
 
-      if test "$build_libtool_libs" = yes; then
+      if test yes = "$build_libtool_libs"; then
 	if test -n "$rpath"; then
 	  case $host in
 	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
@@ -7641,7 +9133,7 @@
 	    ;;
 	  *)
 	    # Add libc to deplibs on all other systems if necessary.
-	    if test "$build_libtool_need_lc" = "yes"; then
+	    if test yes = "$build_libtool_need_lc"; then
 	      func_append deplibs " -lc"
 	    fi
 	    ;;
@@ -7657,9 +9149,9 @@
 	# I'm not sure if I'm treating the release correctly.  I think
 	# release should show up in the -l (ie -lgmp5) so we don't want to
 	# add it in twice.  Is that correct?
-	release=""
-	versuffix=""
-	major=""
+	release=
+	versuffix=
+	major=
 	newdeplibs=
 	droppeddeps=no
 	case $deplibs_check_method in
@@ -7688,20 +9180,20 @@
 	      -l*)
 		func_stripname -l '' "$i"
 		name=$func_stripname_result
-		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		if test yes = "$allow_libtool_libs_with_static_runtimes"; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
 		    func_append newdeplibs " $i"
-		    i=""
+		    i=
 		    ;;
 		  esac
 		fi
-		if test -n "$i" ; then
+		if test -n "$i"; then
 		  libname=`eval "\\$ECHO \"$libname_spec\""`
 		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
 		  set dummy $deplib_matches; shift
 		  deplib_match=$1
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
 		    func_append newdeplibs " $i"
 		  else
 		    droppeddeps=yes
@@ -7731,20 +9223,20 @@
 		$opt_dry_run || $RM conftest
 		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
 		  ldd_output=`ldd conftest`
-		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
 		    case " $predeps $postdeps " in
 		    *" $i "*)
 		      func_append newdeplibs " $i"
-		      i=""
+		      i=
 		      ;;
 		    esac
 		  fi
-		  if test -n "$i" ; then
+		  if test -n "$i"; then
 		    libname=`eval "\\$ECHO \"$libname_spec\""`
 		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
 		    set dummy $deplib_matches; shift
 		    deplib_match=$1
-		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
 		      func_append newdeplibs " $i"
 		    else
 		      droppeddeps=yes
@@ -7781,24 +9273,24 @@
 	    -l*)
 	      func_stripname -l '' "$a_deplib"
 	      name=$func_stripname_result
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
 		  func_append newdeplibs " $a_deplib"
-		  a_deplib=""
+		  a_deplib=
 		  ;;
 		esac
 	      fi
-	      if test -n "$a_deplib" ; then
+	      if test -n "$a_deplib"; then
 		libname=`eval "\\$ECHO \"$libname_spec\""`
 		if test -n "$file_magic_glob"; then
 		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
 		else
 		  libnameglob=$libname
 		fi
-		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+		test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  if test "$want_nocaseglob" = yes; then
+		  if test yes = "$want_nocaseglob"; then
 		    shopt -s nocaseglob
 		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
 		    $nocaseglob
@@ -7816,25 +9308,25 @@
 		      # We might still enter an endless loop, since a link
 		      # loop can be closed while we follow links,
 		      # but so what?
-		      potlib="$potent_lib"
+		      potlib=$potent_lib
 		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+			potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
 			case $potliblink in
-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+			[\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
+			*) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
 			esac
 		      done
 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
 			 $SED -e 10q |
 			 $EGREP "$file_magic_regex" > /dev/null; then
 			func_append newdeplibs " $a_deplib"
-			a_deplib=""
+			a_deplib=
 			break 2
 		      fi
 		  done
 		done
 	      fi
-	      if test -n "$a_deplib" ; then
+	      if test -n "$a_deplib"; then
 		droppeddeps=yes
 		echo
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
@@ -7842,7 +9334,7 @@
 		echo "*** you link to this library.  But I can only do this if you have a"
 		echo "*** shared version of the library, which you do not appear to have"
 		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
+		if test -z "$potlib"; then
 		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
 		else
 		  $ECHO "*** with $libname and none of the candidates passed a file format test"
@@ -7865,30 +9357,30 @@
 	    -l*)
 	      func_stripname -l '' "$a_deplib"
 	      name=$func_stripname_result
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
 		  func_append newdeplibs " $a_deplib"
-		  a_deplib=""
+		  a_deplib=
 		  ;;
 		esac
 	      fi
-	      if test -n "$a_deplib" ; then
+	      if test -n "$a_deplib"; then
 		libname=`eval "\\$ECHO \"$libname_spec\""`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
-		    potlib="$potent_lib" # see symlink-check above in file_magic test
+		    potlib=$potent_lib # see symlink-check above in file_magic test
 		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
 		       $EGREP "$match_pattern_regex" > /dev/null; then
 		      func_append newdeplibs " $a_deplib"
-		      a_deplib=""
+		      a_deplib=
 		      break 2
 		    fi
 		  done
 		done
 	      fi
-	      if test -n "$a_deplib" ; then
+	      if test -n "$a_deplib"; then
 		droppeddeps=yes
 		echo
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
@@ -7896,7 +9388,7 @@
 		echo "*** you link to this library.  But I can only do this if you have a"
 		echo "*** shared version of the library, which you do not appear to have"
 		echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
+		if test -z "$potlib"; then
 		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
 		else
 		  $ECHO "*** with $libname and none of the candidates passed a file format test"
@@ -7912,18 +9404,18 @@
 	  done # Gone through all deplibs.
 	  ;;
 	none | unknown | *)
-	  newdeplibs=""
+	  newdeplibs=
 	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
-	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	    for i in $predeps $postdeps ; do
+	  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	    for i in $predeps $postdeps; do
 	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
 	    done
 	  fi
 	  case $tmp_deplibs in
 	  *[!\	\ ]*)
 	    echo
-	    if test "X$deplibs_check_method" = "Xnone"; then
+	    if test none = "$deplibs_check_method"; then
 	      echo "*** Warning: inter-library dependencies are not supported in this platform."
 	    else
 	      echo "*** Warning: inter-library dependencies are not known to be supported."
@@ -7947,8 +9439,8 @@
 	  ;;
 	esac
 
-	if test "$droppeddeps" = yes; then
-	  if test "$module" = yes; then
+	if test yes = "$droppeddeps"; then
+	  if test yes = "$module"; then
 	    echo
 	    echo "*** Warning: libtool could not satisfy all declared inter-library"
 	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
@@ -7957,12 +9449,12 @@
 	    if test -z "$global_symbol_pipe"; then
 	      echo
 	      echo "*** However, this would only work if libtool was able to extract symbol"
-	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
 	      echo "*** not find such a program.  So, this module is probably useless."
-	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      echo "*** 'nm' from GNU binutils and a full rebuild may help."
 	    fi
-	    if test "$build_old_libs" = no; then
-	      oldlibs="$output_objdir/$libname.$libext"
+	    if test no = "$build_old_libs"; then
+	      oldlibs=$output_objdir/$libname.$libext
 	      build_libtool_libs=module
 	      build_old_libs=yes
 	    else
@@ -7973,14 +9465,14 @@
 	    echo "*** automatically added whenever a program is linked with this library"
 	    echo "*** or is declared to -dlopen it."
 
-	    if test "$allow_undefined" = no; then
+	    if test no = "$allow_undefined"; then
 	      echo
 	      echo "*** Since this library must not contain undefined symbols,"
 	      echo "*** because either the platform does not support them or"
 	      echo "*** it was explicitly requested with -no-undefined,"
 	      echo "*** libtool will only create a static version of it."
-	      if test "$build_old_libs" = no; then
-		oldlibs="$output_objdir/$libname.$libext"
+	      if test no = "$build_old_libs"; then
+		oldlibs=$output_objdir/$libname.$libext
 		build_libtool_libs=module
 		build_old_libs=yes
 	      else
@@ -8026,7 +9518,7 @@
 	*) func_append new_libs " $deplib" ;;
 	esac
       done
-      deplibs="$new_libs"
+      deplibs=$new_libs
 
       # All the library-specific variables (install_libdir is set above).
       library_names=
@@ -8034,25 +9526,25 @@
       dlname=
 
       # Test again, we may have decided not to build it any more
-      if test "$build_libtool_libs" = yes; then
-	# Remove ${wl} instances when linking with ld.
+      if test yes = "$build_libtool_libs"; then
+	# Remove $wl instances when linking with ld.
 	# FIXME: should test the right _cmds variable.
 	case $archive_cmds in
 	  *\$LD\ *) wl= ;;
         esac
-	if test "$hardcode_into_libs" = yes; then
+	if test yes = "$hardcode_into_libs"; then
 	  # Hardcode the library paths
 	  hardcode_libdirs=
 	  dep_rpath=
-	  rpath="$finalize_rpath"
-	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+	  rpath=$finalize_rpath
+	  test relink = "$opt_mode" || rpath=$compile_rpath$rpath
 	  for libdir in $rpath; do
 	    if test -n "$hardcode_libdir_flag_spec"; then
 	      if test -n "$hardcode_libdir_separator"; then
 		func_replace_sysroot "$libdir"
 		libdir=$func_replace_sysroot_result
 		if test -z "$hardcode_libdirs"; then
-		  hardcode_libdirs="$libdir"
+		  hardcode_libdirs=$libdir
 		else
 		  # Just accumulate the unique libdirs.
 		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8077,7 +9569,7 @@
 	  # Substitute the hardcoded libdirs into the rpath.
 	  if test -n "$hardcode_libdir_separator" &&
 	     test -n "$hardcode_libdirs"; then
-	    libdir="$hardcode_libdirs"
+	    libdir=$hardcode_libdirs
 	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
 	  fi
 	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
@@ -8091,8 +9583,8 @@
 	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
 	fi
 
-	shlibpath="$finalize_shlibpath"
-	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	shlibpath=$finalize_shlibpath
+	test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
 	if test -n "$shlibpath"; then
 	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
 	fi
@@ -8102,19 +9594,19 @@
 	eval library_names=\"$library_names_spec\"
 	set dummy $library_names
 	shift
-	realname="$1"
+	realname=$1
 	shift
 
 	if test -n "$soname_spec"; then
 	  eval soname=\"$soname_spec\"
 	else
-	  soname="$realname"
+	  soname=$realname
 	fi
 	if test -z "$dlname"; then
 	  dlname=$soname
 	fi
 
-	lib="$output_objdir/$realname"
+	lib=$output_objdir/$realname
 	linknames=
 	for link
 	do
@@ -8128,7 +9620,7 @@
 	delfiles=
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
-	  export_symbols="$output_objdir/$libname.uexp"
+	  export_symbols=$output_objdir/$libname.uexp
 	  func_append delfiles " $export_symbols"
 	fi
 
@@ -8137,31 +9629,31 @@
 	cygwin* | mingw* | cegcc*)
 	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
 	    # exporting using user supplied symfile
-	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+	    func_dll_def_p "$export_symbols" || {
 	      # and it's NOT already a .def file. Must figure out
 	      # which of the given symbols are data symbols and tag
 	      # them as such. So, trigger use of export_symbols_cmds.
 	      # export_symbols gets reassigned inside the "prepare
 	      # the list of exported symbols" if statement, so the
 	      # include_expsyms logic still works.
-	      orig_export_symbols="$export_symbols"
+	      orig_export_symbols=$export_symbols
 	      export_symbols=
 	      always_export_symbols=yes
-	    fi
+	    }
 	  fi
 	  ;;
 	esac
 
 	# Prepare the list of exported symbols
 	if test -z "$export_symbols"; then
-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    func_verbose "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
+	  if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for '$libname.la'"
+	    export_symbols=$output_objdir/$libname.exp
 	    $opt_dry_run || $RM $export_symbols
 	    cmds=$export_symbols_cmds
-	    save_ifs="$IFS"; IFS='~'
+	    save_ifs=$IFS; IFS='~'
 	    for cmd1 in $cmds; do
-	      IFS="$save_ifs"
+	      IFS=$save_ifs
 	      # Take the normal branch if the nm_file_list_spec branch
 	      # doesn't work or if tool conversion is not needed.
 	      case $nm_file_list_spec~$to_tool_file_cmd in
@@ -8175,7 +9667,7 @@
 		  try_normal_branch=no
 		  ;;
 	      esac
-	      if test "$try_normal_branch" = yes \
+	      if test yes = "$try_normal_branch" \
 		 && { test "$len" -lt "$max_cmd_len" \
 		      || test "$max_cmd_len" -le -1; }
 	      then
@@ -8186,7 +9678,7 @@
 		output_la=$func_basename_result
 		save_libobjs=$libobjs
 		save_output=$output
-		output=${output_objdir}/${output_la}.nm
+		output=$output_objdir/$output_la.nm
 		func_to_tool_file "$output"
 		libobjs=$nm_file_list_spec$func_to_tool_file_result
 		func_append delfiles " $output"
@@ -8209,8 +9701,8 @@
 		break
 	      fi
 	    done
-	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+	    IFS=$save_ifs
+	    if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
 	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
 	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
 	    fi
@@ -8218,16 +9710,16 @@
 	fi
 
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  tmp_export_symbols="$export_symbols"
-	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	  tmp_export_symbols=$export_symbols
+	  test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
 	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
 	fi
 
-	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+	if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
 	  # The given exports_symbols file has to be filtered, so filter it.
-	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	  func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
 	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
-	  # 's' commands which not all seds can handle. GNU sed should be fine
+	  # 's' commands, which not all seds can handle. GNU sed should be fine
 	  # though. Also, the filter scales superlinearly with the number of
 	  # global variables. join(1) would be nice here, but unfortunately
 	  # isn't a blessed tool.
@@ -8246,11 +9738,11 @@
 	    ;;
 	  esac
 	done
-	deplibs="$tmp_deplibs"
+	deplibs=$tmp_deplibs
 
 	if test -n "$convenience"; then
 	  if test -n "$whole_archive_flag_spec" &&
-	    test "$compiler_needs_object" = yes &&
+	    test yes = "$compiler_needs_object" &&
 	    test -z "$libobjs"; then
 	    # extract the archives, so we have objects to list.
 	    # TODO: could optimize this to just extract one archive.
@@ -8261,7 +9753,7 @@
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
 	    test "X$libobjs" = "X " && libobjs=
 	  else
-	    gentop="$output_objdir/${outputname}x"
+	    gentop=$output_objdir/${outputname}x
 	    func_append generated " $gentop"
 
 	    func_extract_archives $gentop $convenience
@@ -8270,18 +9762,18 @@
 	  fi
 	fi
 
-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
 	  func_append linker_flags " $flag"
 	fi
 
 	# Make a backup of the uninstalled library when relinking
-	if test "$opt_mode" = relink; then
+	if test relink = "$opt_mode"; then
 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
 	fi
 
 	# Do each of the archive commands.
-	if test "$module" = yes && test -n "$module_cmds" ; then
+	if test yes = "$module" && test -n "$module_cmds"; then
 	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
 	    eval test_cmds=\"$module_expsym_cmds\"
 	    cmds=$module_expsym_cmds
@@ -8299,7 +9791,7 @@
 	  fi
 	fi
 
-	if test "X$skipped_export" != "X:" &&
+	if test : != "$skipped_export" &&
 	   func_len " $test_cmds" &&
 	   len=$func_len_result &&
 	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
@@ -8332,8 +9824,8 @@
 	  last_robj=
 	  k=1
 
-	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
-	    output=${output_objdir}/${output_la}.lnkscript
+	  if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
+	    output=$output_objdir/$output_la.lnkscript
 	    func_verbose "creating GNU ld script: $output"
 	    echo 'INPUT (' > $output
 	    for obj in $save_libobjs
@@ -8345,14 +9837,14 @@
 	    func_append delfiles " $output"
 	    func_to_tool_file "$output"
 	    output=$func_to_tool_file_result
-	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
-	    output=${output_objdir}/${output_la}.lnk
+	  elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
+	    output=$output_objdir/$output_la.lnk
 	    func_verbose "creating linker input file list: $output"
 	    : > $output
 	    set x $save_libobjs
 	    shift
 	    firstobj=
-	    if test "$compiler_needs_object" = yes; then
+	    if test yes = "$compiler_needs_object"; then
 	      firstobj="$1 "
 	      shift
 	    fi
@@ -8367,7 +9859,7 @@
 	  else
 	    if test -n "$save_libobjs"; then
 	      func_verbose "creating reloadable object files..."
-	      output=$output_objdir/$output_la-${k}.$objext
+	      output=$output_objdir/$output_la-$k.$objext
 	      eval test_cmds=\"$reload_cmds\"
 	      func_len " $test_cmds"
 	      len0=$func_len_result
@@ -8379,13 +9871,13 @@
 		func_len " $obj"
 		func_arith $len + $func_len_result
 		len=$func_arith_result
-		if test "X$objlist" = X ||
+		if test -z "$objlist" ||
 		   test "$len" -lt "$max_cmd_len"; then
 		  func_append objlist " $obj"
 		else
 		  # The command $test_cmds is almost too long, add a
 		  # command to the queue.
-		  if test "$k" -eq 1 ; then
+		  if test 1 -eq "$k"; then
 		    # The first file doesn't have a previous command to add.
 		    reload_objs=$objlist
 		    eval concat_cmds=\"$reload_cmds\"
@@ -8395,10 +9887,10 @@
 		    reload_objs="$objlist $last_robj"
 		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
 		  fi
-		  last_robj=$output_objdir/$output_la-${k}.$objext
+		  last_robj=$output_objdir/$output_la-$k.$objext
 		  func_arith $k + 1
 		  k=$func_arith_result
-		  output=$output_objdir/$output_la-${k}.$objext
+		  output=$output_objdir/$output_la-$k.$objext
 		  objlist=" $obj"
 		  func_len " $last_robj"
 		  func_arith $len0 + $func_len_result
@@ -8410,9 +9902,9 @@
 	      # files will link in the last one created.
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 	      reload_objs="$objlist $last_robj"
-	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+	      eval concat_cmds=\"\$concat_cmds$reload_cmds\"
 	      if test -n "$last_robj"; then
-	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+	        eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
 	      fi
 	      func_append delfiles " $output"
 
@@ -8420,9 +9912,9 @@
 	      output=
 	    fi
 
-	    if ${skipped_export-false}; then
-	      func_verbose "generating symbol list for \`$libname.la'"
-	      export_symbols="$output_objdir/$libname.exp"
+	    ${skipped_export-false} && {
+	      func_verbose "generating symbol list for '$libname.la'"
+	      export_symbols=$output_objdir/$libname.exp
 	      $opt_dry_run || $RM $export_symbols
 	      libobjs=$output
 	      # Append the command to create the export file.
@@ -8431,16 +9923,16 @@
 	      if test -n "$last_robj"; then
 		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
 	      fi
-	    fi
+	    }
 
 	    test -n "$save_libobjs" &&
 	      func_verbose "creating a temporary reloadable object file: $output"
 
 	    # Loop through the commands generated above and execute them.
-	    save_ifs="$IFS"; IFS='~'
+	    save_ifs=$IFS; IFS='~'
 	    for cmd in $concat_cmds; do
-	      IFS="$save_ifs"
-	      $opt_silent || {
+	      IFS=$save_ifs
+	      $opt_quiet || {
 		  func_quote_for_expand "$cmd"
 		  eval "func_echo $func_quote_for_expand_result"
 	      }
@@ -8448,7 +9940,7 @@
 		lt_exit=$?
 
 		# Restore the uninstalled library and exit
-		if test "$opt_mode" = relink; then
+		if test relink = "$opt_mode"; then
 		  ( cd "$output_objdir" && \
 		    $RM "${realname}T" && \
 		    $MV "${realname}U" "$realname" )
@@ -8457,7 +9949,7 @@
 		exit $lt_exit
 	      }
 	    done
-	    IFS="$save_ifs"
+	    IFS=$save_ifs
 
 	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
 	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
@@ -8465,18 +9957,18 @@
 	    fi
 	  fi
 
-          if ${skipped_export-false}; then
+          ${skipped_export-false} && {
 	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	      tmp_export_symbols="$export_symbols"
-	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	      tmp_export_symbols=$export_symbols
+	      test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
 	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
 	    fi
 
 	    if test -n "$orig_export_symbols"; then
 	      # The given exports_symbols file has to be filtered, so filter it.
-	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	      func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
 	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
-	      # 's' commands which not all seds can handle. GNU sed should be fine
+	      # 's' commands, which not all seds can handle. GNU sed should be fine
 	      # though. Also, the filter scales superlinearly with the number of
 	      # global variables. join(1) would be nice here, but unfortunately
 	      # isn't a blessed tool.
@@ -8485,7 +9977,7 @@
 	      export_symbols=$output_objdir/$libname.def
 	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
 	    fi
-	  fi
+	  }
 
 	  libobjs=$output
 	  # Restore the value of output.
@@ -8499,7 +9991,7 @@
 	  # value of $libobjs for piecewise linking.
 
 	  # Do each of the archive commands.
-	  if test "$module" = yes && test -n "$module_cmds" ; then
+	  if test yes = "$module" && test -n "$module_cmds"; then
 	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
 	      cmds=$module_expsym_cmds
 	    else
@@ -8521,7 +10013,7 @@
 
 	# Add any objects from preloaded convenience libraries
 	if test -n "$dlprefiles"; then
-	  gentop="$output_objdir/${outputname}x"
+	  gentop=$output_objdir/${outputname}x
 	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $dlprefiles
@@ -8529,11 +10021,12 @@
 	  test "X$libobjs" = "X " && libobjs=
 	fi
 
-	save_ifs="$IFS"; IFS='~'
+	save_ifs=$IFS; IFS='~'
 	for cmd in $cmds; do
-	  IFS="$save_ifs"
+	  IFS=$sp$nl
 	  eval cmd=\"$cmd\"
-	  $opt_silent || {
+	  IFS=$save_ifs
+	  $opt_quiet || {
 	    func_quote_for_expand "$cmd"
 	    eval "func_echo $func_quote_for_expand_result"
 	  }
@@ -8541,7 +10034,7 @@
 	    lt_exit=$?
 
 	    # Restore the uninstalled library and exit
-	    if test "$opt_mode" = relink; then
+	    if test relink = "$opt_mode"; then
 	      ( cd "$output_objdir" && \
 	        $RM "${realname}T" && \
 		$MV "${realname}U" "$realname" )
@@ -8550,10 +10043,10 @@
 	    exit $lt_exit
 	  }
 	done
-	IFS="$save_ifs"
+	IFS=$save_ifs
 
 	# Restore the uninstalled library and exit
-	if test "$opt_mode" = relink; then
+	if test relink = "$opt_mode"; then
 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
 
 	  if test -n "$convenience"; then
@@ -8573,39 +10066,39 @@
 	done
 
 	# If -module or -export-dynamic was specified, set the dlname.
-	if test "$module" = yes || test "$export_dynamic" = yes; then
+	if test yes = "$module" || test yes = "$export_dynamic"; then
 	  # On all known operating systems, these are identical.
-	  dlname="$soname"
+	  dlname=$soname
 	fi
       fi
       ;;
 
     obj)
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	func_warning "\`-dlopen' is ignored for objects"
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for objects"
       fi
 
       case " $deplibs" in
       *\ -l* | *\ -L*)
-	func_warning "\`-l' and \`-L' are ignored for objects" ;;
+	func_warning "'-l' and '-L' are ignored for objects" ;;
       esac
 
       test -n "$rpath" && \
-	func_warning "\`-rpath' is ignored for objects"
+	func_warning "'-rpath' is ignored for objects"
 
       test -n "$xrpath" && \
-	func_warning "\`-R' is ignored for objects"
+	func_warning "'-R' is ignored for objects"
 
       test -n "$vinfo" && \
-	func_warning "\`-version-info' is ignored for objects"
+	func_warning "'-version-info' is ignored for objects"
 
       test -n "$release" && \
-	func_warning "\`-release' is ignored for objects"
+	func_warning "'-release' is ignored for objects"
 
       case $output in
       *.lo)
 	test -n "$objs$old_deplibs" && \
-	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+	  func_fatal_error "cannot build library object '$output' from non-libtool objects"
 
 	libobj=$output
 	func_lo2o "$libobj"
@@ -8613,7 +10106,7 @@
 	;;
       *)
 	libobj=
-	obj="$output"
+	obj=$output
 	;;
       esac
 
@@ -8626,17 +10119,19 @@
       # the extraction.
       reload_conv_objs=
       gentop=
-      # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec and hope we can get by with
-      # turning comma into space..
-      wl=
-
+      # if reload_cmds runs $LD directly, get rid of -Wl from
+      # whole_archive_flag_spec and hope we can get by with turning comma
+      # into space.
+      case $reload_cmds in
+        *\$LD[\ \$]*) wl= ;;
+      esac
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
 	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	  test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	  reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
 	else
-	  gentop="$output_objdir/${obj}x"
+	  gentop=$output_objdir/${obj}x
 	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $convenience
@@ -8645,12 +10140,12 @@
       fi
 
       # If we're not building shared, we need to use non_pic_objs
-      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+      test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
 
       # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+      reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
 
-      output="$obj"
+      output=$obj
       func_execute_cmds "$reload_cmds" 'exit $?'
 
       # Exit if we aren't doing a library object file.
@@ -8662,7 +10157,7 @@
 	exit $EXIT_SUCCESS
       fi
 
-      if test "$build_libtool_libs" != yes; then
+      test yes = "$build_libtool_libs" || {
 	if test -n "$gentop"; then
 	  func_show_eval '${RM}r "$gentop"'
 	fi
@@ -8672,12 +10167,12 @@
 	# $show "echo timestamp > $libobj"
 	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
 	exit $EXIT_SUCCESS
-      fi
+      }
 
-      if test -n "$pic_flag" || test "$pic_mode" != default; then
+      if test -n "$pic_flag" || test default != "$pic_mode"; then
 	# Only do commands if we really have different PIC objects.
 	reload_objs="$libobjs $reload_conv_objs"
-	output="$libobj"
+	output=$libobj
 	func_execute_cmds "$reload_cmds" 'exit $?'
       fi
 
@@ -8694,16 +10189,14 @@
 	          output=$func_stripname_result.exe;;
       esac
       test -n "$vinfo" && \
-	func_warning "\`-version-info' is ignored for programs"
+	func_warning "'-version-info' is ignored for programs"
 
       test -n "$release" && \
-	func_warning "\`-release' is ignored for programs"
+	func_warning "'-release' is ignored for programs"
 
-      test "$preload" = yes \
-        && test "$dlopen_support" = unknown \
-	&& test "$dlopen_self" = unknown \
-	&& test "$dlopen_self_static" = unknown && \
-	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+      $preload \
+	&& test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
+	&& func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
 
       case $host in
       *-*-rhapsody* | *-*-darwin1.[012])
@@ -8717,11 +10210,11 @@
       *-*-darwin*)
 	# Don't allow lazy linking, it breaks C++ global constructors
 	# But is supposedly fixed on 10.4 or later (yay!).
-	if test "$tagname" = CXX ; then
+	if test CXX = "$tagname"; then
 	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
 	    10.[0123])
-	      func_append compile_command " ${wl}-bind_at_load"
-	      func_append finalize_command " ${wl}-bind_at_load"
+	      func_append compile_command " $wl-bind_at_load"
+	      func_append finalize_command " $wl-bind_at_load"
 	    ;;
 	  esac
 	fi
@@ -8757,7 +10250,7 @@
 	*) func_append new_libs " $deplib" ;;
 	esac
       done
-      compile_deplibs="$new_libs"
+      compile_deplibs=$new_libs
 
 
       func_append compile_command " $compile_deplibs"
@@ -8781,7 +10274,7 @@
 	if test -n "$hardcode_libdir_flag_spec"; then
 	  if test -n "$hardcode_libdir_separator"; then
 	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
+	      hardcode_libdirs=$libdir
 	    else
 	      # Just accumulate the unique libdirs.
 	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8804,7 +10297,7 @@
 	fi
 	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+	  testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
 	  ::) dllsearchpath=$libdir;;
@@ -8821,10 +10314,10 @@
       # Substitute the hardcoded libdirs into the rpath.
       if test -n "$hardcode_libdir_separator" &&
 	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
+	libdir=$hardcode_libdirs
 	eval rpath=\" $hardcode_libdir_flag_spec\"
       fi
-      compile_rpath="$rpath"
+      compile_rpath=$rpath
 
       rpath=
       hardcode_libdirs=
@@ -8832,7 +10325,7 @@
 	if test -n "$hardcode_libdir_flag_spec"; then
 	  if test -n "$hardcode_libdir_separator"; then
 	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
+	      hardcode_libdirs=$libdir
 	    else
 	      # Just accumulate the unique libdirs.
 	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8857,45 +10350,43 @@
       # Substitute the hardcoded libdirs into the rpath.
       if test -n "$hardcode_libdir_separator" &&
 	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
+	libdir=$hardcode_libdirs
 	eval rpath=\" $hardcode_libdir_flag_spec\"
       fi
-      finalize_rpath="$rpath"
+      finalize_rpath=$rpath
 
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+      if test -n "$libobjs" && test yes = "$build_old_libs"; then
 	# Transform all the library objects into standard objects.
 	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
 	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
       fi
 
-      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+      func_generate_dlsyms "$outputname" "@PROGRAM@" false
 
       # template prelinking step
       if test -n "$prelink_cmds"; then
 	func_execute_cmds "$prelink_cmds" 'exit $?'
       fi
 
-      wrappers_required=yes
+      wrappers_required=:
       case $host in
       *cegcc* | *mingw32ce*)
         # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
-        wrappers_required=no
+        wrappers_required=false
         ;;
       *cygwin* | *mingw* )
-        if test "$build_libtool_libs" != yes; then
-          wrappers_required=no
-        fi
+        test yes = "$build_libtool_libs" || wrappers_required=false
         ;;
       *)
-        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
-          wrappers_required=no
+        if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+          wrappers_required=false
         fi
         ;;
       esac
-      if test "$wrappers_required" = no; then
+      $wrappers_required || {
 	# Replace the output file specification.
 	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
-	link_command="$compile_command$compile_rpath"
+	link_command=$compile_command$compile_rpath
 
 	# We have no uninstalled library dependencies, so finalize right now.
 	exit_status=0
@@ -8908,12 +10399,12 @@
 	fi
 
 	# Delete the generated files.
-	if test -f "$output_objdir/${outputname}S.${objext}"; then
-	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+	if test -f "$output_objdir/${outputname}S.$objext"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
 	fi
 
 	exit $exit_status
-      fi
+      }
 
       if test -n "$compile_shlibpath$finalize_shlibpath"; then
 	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
@@ -8943,9 +10434,9 @@
 	fi
       fi
 
-      if test "$no_install" = yes; then
+      if test yes = "$no_install"; then
 	# We don't need to create a wrapper script.
-	link_command="$compile_var$compile_command$compile_rpath"
+	link_command=$compile_var$compile_command$compile_rpath
 	# Replace the output file specification.
 	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
 	# Delete the old output file.
@@ -8962,27 +10453,28 @@
 	exit $EXIT_SUCCESS
       fi
 
-      if test "$hardcode_action" = relink; then
-	# Fast installation is not supported
-	link_command="$compile_var$compile_command$compile_rpath"
-	relink_command="$finalize_var$finalize_command$finalize_rpath"
+      case $hardcode_action,$fast_install in
+        relink,*)
+	  # Fast installation is not supported
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
 
-	func_warning "this platform does not like uninstalled shared libraries"
-	func_warning "\`$output' will be relinked during installation"
-      else
-	if test "$fast_install" != no; then
-	  link_command="$finalize_var$compile_command$finalize_rpath"
-	  if test "$fast_install" = yes; then
-	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
-	  else
-	    # fast_install is set to needless
-	    relink_command=
-	  fi
-	else
-	  link_command="$compile_var$compile_command$compile_rpath"
-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
-	fi
-      fi
+	  func_warning "this platform does not like uninstalled shared libraries"
+	  func_warning "'$output' will be relinked during installation"
+	  ;;
+        *,yes)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+          ;;
+	*,no)
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
+          ;;
+	*,needless)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=
+          ;;
+      esac
 
       # Replace the output file specification.
       link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
@@ -9039,8 +10531,8 @@
 	    func_dirname_and_basename "$output" "" "."
 	    output_name=$func_basename_result
 	    output_path=$func_dirname_result
-	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
-	    cwrapper="$output_path/$output_name.exe"
+	    cwrappersource=$output_path/$objdir/lt-$output_name.c
+	    cwrapper=$output_path/$output_name.exe
 	    $RM $cwrappersource $cwrapper
 	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
 
@@ -9061,7 +10553,7 @@
 	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
 	    $opt_dry_run || {
 	      # note: this script will not be executed, so do not chmod.
-	      if test "x$build" = "x$host" ; then
+	      if test "x$build" = "x$host"; then
 		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
 	      else
 		func_emit_wrapper no > $func_ltwrapper_scriptname_result
@@ -9084,25 +10576,27 @@
     # See if we need to build an old-fashioned archive.
     for oldlib in $oldlibs; do
 
-      if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save $symfileobj"
-	addlibs="$convenience"
-	build_libtool_libs=no
-      else
-	if test "$build_libtool_libs" = module; then
-	  oldobjs="$libobjs_save"
+      case $build_libtool_libs in
+        convenience)
+	  oldobjs="$libobjs_save $symfileobj"
+	  addlibs=$convenience
 	  build_libtool_libs=no
-	else
+	  ;;
+	module)
+	  oldobjs=$libobjs_save
+	  addlibs=$old_convenience
+	  build_libtool_libs=no
+          ;;
+	*)
 	  oldobjs="$old_deplibs $non_pic_objects"
-	  if test "$preload" = yes && test -f "$symfileobj"; then
-	    func_append oldobjs " $symfileobj"
-	  fi
-	fi
-	addlibs="$old_convenience"
-      fi
+	  $preload && test -f "$symfileobj" \
+	    && func_append oldobjs " $symfileobj"
+	  addlibs=$old_convenience
+	  ;;
+      esac
 
       if test -n "$addlibs"; then
-	gentop="$output_objdir/${outputname}x"
+	gentop=$output_objdir/${outputname}x
 	func_append generated " $gentop"
 
 	func_extract_archives $gentop $addlibs
@@ -9110,13 +10604,13 @@
       fi
 
       # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+      if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
 	cmds=$old_archive_from_new_cmds
       else
 
 	# Add any objects from preloaded convenience libraries
 	if test -n "$dlprefiles"; then
-	  gentop="$output_objdir/${outputname}x"
+	  gentop=$output_objdir/${outputname}x
 	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $dlprefiles
@@ -9137,7 +10631,7 @@
 	  :
 	else
 	  echo "copying selected object files to avoid basename conflicts..."
-	  gentop="$output_objdir/${outputname}x"
+	  gentop=$output_objdir/${outputname}x
 	  func_append generated " $gentop"
 	  func_mkdir_p "$gentop"
 	  save_oldobjs=$oldobjs
@@ -9146,7 +10640,7 @@
 	  for obj in $save_oldobjs
 	  do
 	    func_basename "$obj"
-	    objbase="$func_basename_result"
+	    objbase=$func_basename_result
 	    case " $oldobjs " in
 	    " ") oldobjs=$obj ;;
 	    *[\ /]"$objbase "*)
@@ -9215,18 +10709,18 @@
 	    else
 	      # the above command should be used before it gets too long
 	      oldobjs=$objlist
-	      if test "$obj" = "$last_oldobj" ; then
+	      if test "$obj" = "$last_oldobj"; then
 		RANLIB=$save_RANLIB
 	      fi
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+	      eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
 	      objlist=
 	      len=$len0
 	    fi
 	  done
 	  RANLIB=$save_RANLIB
 	  oldobjs=$objlist
-	  if test "X$oldobjs" = "X" ; then
+	  if test -z "$oldobjs"; then
 	    eval cmds=\"\$concat_cmds\"
 	  else
 	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
@@ -9243,7 +10737,7 @@
     case $output in
     *.la)
       old_library=
-      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      test yes = "$build_old_libs" && old_library=$libname.$libext
       func_verbose "creating $output"
 
       # Preserve any variables that may affect compiler behavior
@@ -9258,31 +10752,31 @@
 	fi
       done
       # Quote the link command for shipping.
-      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
       relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
-      if test "$hardcode_automatic" = yes ; then
+      if test yes = "$hardcode_automatic"; then
 	relink_command=
       fi
 
       # Only create the output if not a dry run.
       $opt_dry_run || {
 	for installed in no yes; do
-	  if test "$installed" = yes; then
+	  if test yes = "$installed"; then
 	    if test -z "$install_libdir"; then
 	      break
 	    fi
-	    output="$output_objdir/$outputname"i
+	    output=$output_objdir/${outputname}i
 	    # Replace all uninstalled libtool libraries with the installed ones
 	    newdependency_libs=
 	    for deplib in $dependency_libs; do
 	      case $deplib in
 	      *.la)
 		func_basename "$deplib"
-		name="$func_basename_result"
+		name=$func_basename_result
 		func_resolve_sysroot "$deplib"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
 		test -z "$libdir" && \
-		  func_fatal_error "\`$deplib' is not a valid libtool archive"
+		  func_fatal_error "'$deplib' is not a valid libtool archive"
 		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
 		;;
 	      -L*)
@@ -9298,23 +10792,23 @@
 	      *) func_append newdependency_libs " $deplib" ;;
 	      esac
 	    done
-	    dependency_libs="$newdependency_libs"
+	    dependency_libs=$newdependency_libs
 	    newdlfiles=
 
 	    for lib in $dlfiles; do
 	      case $lib in
 	      *.la)
 	        func_basename "$lib"
-		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 		test -z "$libdir" && \
-		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		  func_fatal_error "'$lib' is not a valid libtool archive"
 		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
 		;;
 	      *) func_append newdlfiles " $lib" ;;
 	      esac
 	    done
-	    dlfiles="$newdlfiles"
+	    dlfiles=$newdlfiles
 	    newdlprefiles=
 	    for lib in $dlprefiles; do
 	      case $lib in
@@ -9324,34 +10818,34 @@
 		# didn't already link the preopened objects directly into
 		# the library:
 		func_basename "$lib"
-		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 		test -z "$libdir" && \
-		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		  func_fatal_error "'$lib' is not a valid libtool archive"
 		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
 		;;
 	      esac
 	    done
-	    dlprefiles="$newdlprefiles"
+	    dlprefiles=$newdlprefiles
 	  else
 	    newdlfiles=
 	    for lib in $dlfiles; do
 	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
 	      func_append newdlfiles " $abs"
 	    done
-	    dlfiles="$newdlfiles"
+	    dlfiles=$newdlfiles
 	    newdlprefiles=
 	    for lib in $dlprefiles; do
 	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
 	      func_append newdlprefiles " $abs"
 	    done
-	    dlprefiles="$newdlprefiles"
+	    dlprefiles=$newdlprefiles
 	  fi
 	  $RM $output
 	  # place dlname in correct position for cygwin
@@ -9367,10 +10861,9 @@
 	  case $host,$output,$installed,$module,$dlname in
 	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
 	      # If a -bindir argument was supplied, place the dll there.
-	      if test "x$bindir" != x ;
-	      then
+	      if test -n "$bindir"; then
 		func_relative_path "$install_libdir" "$bindir"
-		tdlname=$func_relative_path_result$dlname
+		tdlname=$func_relative_path_result/$dlname
 	      else
 		# Otherwise fall back on heuristic.
 		tdlname=../bin/$dlname
@@ -9379,7 +10872,7 @@
 	  esac
 	  $ECHO > $output "\
 # $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
 #
 # Please DO NOT delete this file!
 # It is necessary for linking the library.
@@ -9393,7 +10886,7 @@
 # The name of the static archive.
 old_library='$old_library'
 
-# Linker flags that can not go in dependency_libs.
+# Linker flags that cannot go in dependency_libs.
 inherited_linker_flags='$new_inherited_linker_flags'
 
 # Libraries that this one depends upon.
@@ -9419,7 +10912,7 @@
 
 # Directory that this library needs to be installed in:
 libdir='$install_libdir'"
-	  if test "$installed" = no && test "$need_relink" = yes; then
+	  if test no,yes = "$installed,$need_relink"; then
 	    $ECHO >> $output "\
 relink_command=\"$relink_command\""
 	  fi
@@ -9434,27 +10927,29 @@
     exit $EXIT_SUCCESS
 }
 
-{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
-    func_mode_link ${1+"$@"}
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+  func_mode_link ${1+"$@"}
+fi
 
 
 # func_mode_uninstall arg...
 func_mode_uninstall ()
 {
-    $opt_debug
-    RM="$nonopt"
+    $debug_cmd
+
+    RM=$nonopt
     files=
-    rmforce=
+    rmforce=false
     exit_status=0
 
     # This variable tells wrapper scripts just to set variables rather
     # than running their programs.
-    libtool_install_magic="$magic"
+    libtool_install_magic=$magic
 
     for arg
     do
       case $arg in
-      -f) func_append RM " $arg"; rmforce=yes ;;
+      -f) func_append RM " $arg"; rmforce=: ;;
       -*) func_append RM " $arg" ;;
       *) func_append files " $arg" ;;
       esac
@@ -9467,18 +10962,18 @@
 
     for file in $files; do
       func_dirname "$file" "" "."
-      dir="$func_dirname_result"
-      if test "X$dir" = X.; then
-	odir="$objdir"
+      dir=$func_dirname_result
+      if test . = "$dir"; then
+	odir=$objdir
       else
-	odir="$dir/$objdir"
+	odir=$dir/$objdir
       fi
       func_basename "$file"
-      name="$func_basename_result"
-      test "$opt_mode" = uninstall && odir="$dir"
+      name=$func_basename_result
+      test uninstall = "$opt_mode" && odir=$dir
 
       # Remember odir for removal later, being careful to avoid duplicates
-      if test "$opt_mode" = clean; then
+      if test clean = "$opt_mode"; then
 	case " $rmdirs " in
 	  *" $odir "*) ;;
 	  *) func_append rmdirs " $odir" ;;
@@ -9493,11 +10988,11 @@
       elif test -d "$file"; then
 	exit_status=1
 	continue
-      elif test "$rmforce" = yes; then
+      elif $rmforce; then
 	continue
       fi
 
-      rmfiles="$file"
+      rmfiles=$file
 
       case $name in
       *.la)
@@ -9511,7 +11006,7 @@
 	  done
 	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
 
-	  case "$opt_mode" in
+	  case $opt_mode in
 	  clean)
 	    case " $library_names " in
 	    *" $dlname "*) ;;
@@ -9522,12 +11017,12 @@
 	  uninstall)
 	    if test -n "$library_names"; then
 	      # Do each command in the postuninstall commands.
-	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	      func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
 	    fi
 
 	    if test -n "$old_library"; then
 	      # Do each command in the old_postuninstall commands.
-	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	      func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
 	    fi
 	    # FIXME: should reinstall the best remaining shared library.
 	    ;;
@@ -9543,21 +11038,19 @@
 	  func_source $dir/$name
 
 	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" &&
-	     test "$pic_object" != none; then
+	  if test -n "$pic_object" && test none != "$pic_object"; then
 	    func_append rmfiles " $dir/$pic_object"
 	  fi
 
 	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" &&
-	     test "$non_pic_object" != none; then
+	  if test -n "$non_pic_object" && test none != "$non_pic_object"; then
 	    func_append rmfiles " $dir/$non_pic_object"
 	  fi
 	fi
 	;;
 
       *)
-	if test "$opt_mode" = clean ; then
+	if test clean = "$opt_mode"; then
 	  noexename=$name
 	  case $file in
 	  *.exe)
@@ -9584,12 +11077,12 @@
 
 	    # note $name still contains .exe if it was in $file originally
 	    # as does the version of $file that was added into $rmfiles
-	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
-	    if test "$fast_install" = yes && test -n "$relink_command"; then
+	    func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+	    if test yes = "$fast_install" && test -n "$relink_command"; then
 	      func_append rmfiles " $odir/lt-$name"
 	    fi
-	    if test "X$noexename" != "X$name" ; then
-	      func_append rmfiles " $odir/lt-${noexename}.c"
+	    if test "X$noexename" != "X$name"; then
+	      func_append rmfiles " $odir/lt-$noexename.c"
 	    fi
 	  fi
 	fi
@@ -9598,7 +11091,7 @@
       func_show_eval "$RM $rmfiles" 'exit_status=1'
     done
 
-    # Try to remove the ${objdir}s in the directories where we deleted files
+    # Try to remove the $objdir's in the directories where we deleted files
     for dir in $rmdirs; do
       if test -d "$dir"; then
 	func_show_eval "rmdir $dir >/dev/null 2>&1"
@@ -9608,16 +11101,17 @@
     exit $exit_status
 }
 
-{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
-    func_mode_uninstall ${1+"$@"}
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+  func_mode_uninstall ${1+"$@"}
+fi
 
 test -z "$opt_mode" && {
-  help="$generic_help"
+  help=$generic_help
   func_fatal_help "you must specify a MODE"
 }
 
 test -z "$exec_cmd" && \
-  func_fatal_help "invalid operation mode \`$opt_mode'"
+  func_fatal_help "invalid operation mode '$opt_mode'"
 
 if test -n "$exec_cmd"; then
   eval exec "$exec_cmd"
@@ -9628,7 +11122,7 @@
 
 
 # The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries.  Given conflicting
+# where we disable both kinds of libraries.  Given conflicting
 # choices, we go for a static library, that is the most portable,
 # since we can't tell whether shared libraries were disabled because
 # the user asked for that or because the platform doesn't support
@@ -9651,5 +11145,3 @@
 # mode:shell-script
 # sh-indentation:2
 # End:
-# vi:sw=2
-
diff --git a/dist/m4/libtool.m4 b/dist/m4/libtool.m4
index 44e0ecf..a3bc337 100644
--- a/dist/m4/libtool.m4
+++ b/dist/m4/libtool.m4
@@ -1,8 +1,6 @@
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 #
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
+#   Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 # This file is free software; the Free Software Foundation gives
@@ -10,36 +8,30 @@
 # modifications, as long as this notice is preserved.
 
 m4_define([_LT_COPYING], [dnl
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-#                 Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
 #
-#   This file is part of GNU Libtool.
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the  same
+# distribution terms that you use for the rest of that program.
 #
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 ])
 
-# serial 57 LT_INIT
+# serial 58 LT_INIT
 
 
 # LT_PREREQ(VERSION)
@@ -67,7 +59,7 @@
 # LT_INIT([OPTIONS])
 # ------------------
 AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK
 AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
 AC_BEFORE([$0], [LT_LANG])dnl
 AC_BEFORE([$0], [LT_OUTPUT])dnl
@@ -91,7 +83,7 @@
 _LT_SET_OPTIONS([$0], [$1])
 
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -111,26 +103,43 @@
 dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
 
 
+# _LT_PREPARE_CC_BASENAME
+# -----------------------
+m4_defun([_LT_PREPARE_CC_BASENAME], [
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in @S|@*""; do
+      case $cc_temp in
+        compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+        distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+])# _LT_PREPARE_CC_BASENAME
+
+
 # _LT_CC_BASENAME(CC)
 # -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
+# but that macro is also expanded into generated libtool script, which
+# arranges for $SED and $ECHO to be set by different means.
 m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+[m4_require([_LT_PREPARE_CC_BASENAME])dnl
+AC_REQUIRE([_LT_DECL_SED])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+func_cc_basename $1
+cc_basename=$func_cc_basename_result
 ])
 
 
 # _LT_FILEUTILS_DEFAULTS
 # ----------------------
 # It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.
 m4_defun([_LT_FILEUTILS_DEFAULTS],
 [: ${CP="cp -f"}
 : ${MV="mv -f"}
@@ -177,15 +186,16 @@
 m4_require([_LT_CMD_OLD_ARCHIVE])dnl
 m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
 m4_require([_LT_WITH_SYSROOT])dnl
+m4_require([_LT_CMD_TRUNCATE])dnl
 
 _LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
 # commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
    setopt NO_GLOB_SUBST
 fi
 ])
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
    setopt NO_GLOB_SUBST
 fi
 
@@ -198,7 +208,7 @@
   # AIX sometimes has problems with the GCC collect2 program.  For some
   # reason, if we set the COLLECT_NAMES environment variable, the problems
   # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
+  if test set != "${COLLECT_NAMES+set}"; then
     COLLECT_NAMES=
     export COLLECT_NAMES
   fi
@@ -209,14 +219,14 @@
 ofile=libtool
 can_build_shared=yes
 
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
 
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
 
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
 
 # Set sane defaults for various variables
 test -z "$CC" && CC=cc
@@ -269,14 +279,14 @@
 
 # _LT_PROG_LTMAIN
 # ---------------
-# Note that this code is called both from `configure', and `config.status'
+# Note that this code is called both from 'configure', and 'config.status'
 # now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# 'config.status' has no value for ac_aux_dir unless we are using Automake,
 # so we pass a copy along to make sure it has a sensible value anyway.
 m4_defun([_LT_PROG_LTMAIN],
 [m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
 _LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
 ])# _LT_PROG_LTMAIN
 
 
@@ -286,7 +296,7 @@
 
 # So that we can recreate a full libtool script including additional
 # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
+# in macros and then make a single call at the end using the 'libtool'
 # label.
 
 
@@ -421,8 +431,8 @@
 
 # _LT_CONFIG_STATUS_DECLARE([VARNAME])
 # ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'.  VARNAME
+# Quote a variable value, and forward it to 'config.status' so that its
+# declaration there will have the same value as in 'configure'.  VARNAME
 # must have a single quote delimited value for this to work.
 m4_define([_LT_CONFIG_STATUS_DECLARE],
 [$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
@@ -446,7 +456,7 @@
 # Output comment and list of tags supported by the script
 m4_defun([_LT_LIBTOOL_TAGS],
 [_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
+available_tags='_LT_TAGS'dnl
 ])
 
 
@@ -474,7 +484,7 @@
 # _LT_LIBTOOL_CONFIG_VARS
 # -----------------------
 # Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
 # script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
 # section) are produced by _LT_LIBTOOL_TAG_VARS.
 m4_defun([_LT_LIBTOOL_CONFIG_VARS],
@@ -500,8 +510,8 @@
 # Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
 # variables for single and double quote escaping we saved from calls
 # to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'.  Finally, any additional code accumulated
+# into 'config.status', and then the shell code to quote escape them in
+# for loops in 'config.status'.  Finally, any additional code accumulated
 # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
 m4_defun([_LT_CONFIG_COMMANDS],
 [AC_PROVIDE_IFELSE([LT_OUTPUT],
@@ -547,7 +557,7 @@
 ]], lt_decl_quote_varnames); do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -560,7 +570,7 @@
 ]], lt_decl_dquote_varnames); do
     case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -576,7 +586,7 @@
 # Generate a child script FILE with all initialization necessary to
 # reuse the environment learned by the parent script, and make the
 # file executable.  If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins.  After this
+# '#!' sequence but before initialization text begins.  After this
 # macro, additional text can be appended to FILE to form the body of
 # the child script.  The macro ends with non-zero status if the
 # file could not be fully written (such as if the disk is full).
@@ -598,7 +608,7 @@
 _AS_PREPARE
 exec AS_MESSAGE_FD>&1
 _ASEOF
-test $lt_write_fail = 0 && chmod +x $1[]dnl
+test 0 = "$lt_write_fail" && chmod +x $1[]dnl
 m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
 
 # LT_OUTPUT
@@ -621,7 +631,7 @@
 } >&AS_MESSAGE_LOG_FD
 
 lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
+'$as_me' creates a local libtool stub from the current configuration,
 for use in further configure time tests before the real libtool is
 generated.
 
@@ -643,7 +653,7 @@
 This config.lt script is free software; the Free Software Foundation
 gives unlimited permision to copy, distribute and modify it."
 
-while test $[#] != 0
+while test 0 != $[#]
 do
   case $[1] in
     --version | --v* | -V )
@@ -656,10 +666,10 @@
       lt_cl_silent=: ;;
 
     -*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
+Try '$[0] --help' for more information.]) ;;
 
     *) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
+Try '$[0] --help' for more information.]) ;;
   esac
   shift
 done
@@ -685,7 +695,7 @@
 # open by configure.  Here we exec the FD to /dev/null, effectively closing
 # config.log, so it can be properly (re)opened and appended to by config.lt.
 lt_cl_success=:
-test "$silent" = yes &&
+test yes = "$silent" &&
   lt_config_lt_args="$lt_config_lt_args --quiet"
 exec AS_MESSAGE_LOG_FD>/dev/null
 $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
@@ -705,27 +715,31 @@
 _LT_CONFIG_SAVE_COMMANDS([
   m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
   m4_if(_LT_TAG, [C], [
-    # See if we are running on zsh, and set the options which allow our
+    # See if we are running on zsh, and set the options that allow our
     # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
+    if test -n "${ZSH_VERSION+set}"; then
       setopt NO_GLOB_SUBST
     fi
 
-    cfgfile="${ofile}T"
+    cfgfile=${ofile}T
     trap "$RM \"$cfgfile\"; exit 1" 1 2 15
     $RM "$cfgfile"
 
     cat <<_LT_EOF >> "$cfgfile"
 #! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Generated automatically by $as_me ($PACKAGE) $VERSION
 # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
 _LT_COPYING
 _LT_LIBTOOL_TAGS
 
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
 # ### BEGIN LIBTOOL CONFIG
 _LT_LIBTOOL_CONFIG_VARS
 _LT_LIBTOOL_TAG_VARS
@@ -733,13 +747,24 @@
 
 _LT_EOF
 
+    cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_PREPARE_MUNGE_PATH_LIST
+_LT_PREPARE_CC_BASENAME
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
   case $host_os in
   aix3*)
     cat <<\_LT_EOF >> "$cfgfile"
 # AIX sometimes has problems with the GCC collect2 program.  For some
 # reason, if we set the COLLECT_NAMES environment variable, the problems
 # vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
   COLLECT_NAMES=
   export COLLECT_NAMES
 fi
@@ -756,8 +781,6 @@
   sed '$q' "$ltmain" >> "$cfgfile" \
      || (rm -f "$cfgfile"; exit 1)
 
-  _LT_PROG_REPLACE_SHELLFNS
-
    mv -f "$cfgfile" "$ofile" ||
     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
   chmod +x "$ofile"
@@ -775,7 +798,6 @@
 [m4_if([$1], [], [
     PACKAGE='$PACKAGE'
     VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
     RM='$RM'
     ofile='$ofile'], [])
 ])dnl /_LT_CONFIG_SAVE_COMMANDS
@@ -974,7 +996,7 @@
 
     AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
       [lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
+      if test -z "$LT_MULTI_MODULE"; then
 	# By default we will add the -single_module flag. You can override
 	# by either setting the environment variable LT_MULTI_MODULE
 	# non-empty at configure time, or by adding -multi_module to the
@@ -992,7 +1014,7 @@
 	  cat conftest.err >&AS_MESSAGE_LOG_FD
 	# Otherwise, if the output was created with a 0 exit code from
 	# the compiler, it worked.
-	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
 	  lt_cv_apple_cc_single_mod=yes
 	else
 	  cat conftest.err >&AS_MESSAGE_LOG_FD
@@ -1010,7 +1032,7 @@
       AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
 	[lt_cv_ld_exported_symbols_list=yes],
 	[lt_cv_ld_exported_symbols_list=no])
-	LDFLAGS="$save_LDFLAGS"
+	LDFLAGS=$save_LDFLAGS
     ])
 
     AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
@@ -1032,7 +1054,7 @@
       _lt_result=$?
       if test -s conftest.err && $GREP force_load conftest.err; then
 	cat conftest.err >&AS_MESSAGE_LOG_FD
-      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+      elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
 	lt_cv_ld_force_load=yes
       else
 	cat conftest.err >&AS_MESSAGE_LOG_FD
@@ -1042,32 +1064,32 @@
     ])
     case $host_os in
     rhapsody* | darwin1.[[012]])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+      _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
     darwin1.*)
-      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+      _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
     darwin*) # darwin 5.x on
       # if running on 10.5 or later, the deployment target defaults
       # to the OS version, if on x86, and 10.4, the deployment
       # target defaults to 10.4. Don't you love it?
       case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
 	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-	10.[[012]]*)
-	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+	10.[[012]][[,.]]*)
+	  _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
 	10.*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
       esac
     ;;
   esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+    if test yes = "$lt_cv_apple_cc_single_mod"; then
       _lt_dar_single_mod='$single_module'
     fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    if test yes = "$lt_cv_ld_exported_symbols_list"; then
+      _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
     else
-      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
     fi
-    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+    if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
@@ -1087,29 +1109,29 @@
   _LT_TAGVAR(hardcode_direct, $1)=no
   _LT_TAGVAR(hardcode_automatic, $1)=yes
   _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+  if test yes = "$lt_cv_ld_force_load"; then
+    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
     m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
                   [FC],  [_LT_TAGVAR(compiler_needs_object, $1)=yes])
   else
     _LT_TAGVAR(whole_archive_flag_spec, $1)=''
   fi
   _LT_TAGVAR(link_all_deplibs, $1)=yes
-  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+  _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
   case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
      *) _lt_dar_can_shared=$GCC ;;
   esac
-  if test "$_lt_dar_can_shared" = "yes"; then
+  if test yes = "$_lt_dar_can_shared"; then
     output_verbose_link_cmd=func_echo_all
-    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
     m4_if([$1], [CXX],
-[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+[   if test yes != "$lt_cv_apple_cc_single_mod"; then
+      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
     fi
 ],[])
   else
@@ -1129,7 +1151,7 @@
 # Allow to override them for all tags through lt_cv_aix_libpath.
 m4_defun([_LT_SYS_MODULE_PATH_AIX],
 [m4_require([_LT_DECL_SED])dnl
-if test "${lt_cv_aix_libpath+set}" = set; then
+if test set = "${lt_cv_aix_libpath+set}"; then
   aix_libpath=$lt_cv_aix_libpath
 else
   AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
@@ -1147,7 +1169,7 @@
     _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
   fi],[])
   if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
-    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib
   fi
   ])
   aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
@@ -1167,8 +1189,8 @@
 # -----------------------
 # Find how we can fake an echo command that does not interpret backslash.
 # In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
+# of the generated configure script that will find a shell with a builtin
+# printf (that we can use as an echo command).
 m4_defun([_LT_PROG_ECHO_BACKSLASH],
 [ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
 ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
@@ -1196,10 +1218,10 @@
 # Invoke $ECHO with all args, space-separated.
 func_echo_all ()
 {
-    $ECHO "$*" 
+    $ECHO "$*"
 }
 
-case "$ECHO" in
+case $ECHO in
   printf*) AC_MSG_RESULT([printf]) ;;
   print*) AC_MSG_RESULT([print -r]) ;;
   *) AC_MSG_RESULT([cat]) ;;
@@ -1225,16 +1247,17 @@
 AC_DEFUN([_LT_WITH_SYSROOT],
 [AC_MSG_CHECKING([for sysroot])
 AC_ARG_WITH([sysroot],
-[  --with-sysroot[=DIR] Search for dependent libraries within DIR
-                        (or the compiler's sysroot if not specified).],
+[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
+  [Search for dependent libraries within DIR (or the compiler's sysroot
+   if not specified).])],
 [], [with_sysroot=no])
 
 dnl lt_sysroot will always be passed unquoted.  We quote it here
 dnl in case the user passed a directory name.
 lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
  yes)
-   if test "$GCC" = yes; then
+   if test yes = "$GCC"; then
      lt_sysroot=`$CC --print-sysroot 2>/dev/null`
    fi
    ;; #(
@@ -1244,14 +1267,14 @@
  no|'')
    ;; #(
  *)
-   AC_MSG_RESULT([${with_sysroot}])
+   AC_MSG_RESULT([$with_sysroot])
    AC_MSG_ERROR([The sysroot must be an absolute path.])
    ;;
 esac
 
  AC_MSG_RESULT([${lt_sysroot:-no}])
 _LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
-[dependent libraries, and in which our libraries should be installed.])])
+[dependent libraries, and where our libraries should be installed.])])
 
 # _LT_ENABLE_LOCK
 # ---------------
@@ -1259,31 +1282,33 @@
 [AC_ARG_ENABLE([libtool-lock],
   [AS_HELP_STRING([--disable-libtool-lock],
     [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
 case $host in
 ia64-*-hpux*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set mode
+  # options accordingly.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.$ac_objext` in
       *ELF-32*)
-	HPUX_IA64_MODE="32"
+	HPUX_IA64_MODE=32
 	;;
       *ELF-64*)
-	HPUX_IA64_MODE="64"
+	HPUX_IA64_MODE=64
 	;;
     esac
   fi
   rm -rf conftest*
   ;;
 *-*-irix6*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
   echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
-    if test "$lt_cv_prog_gnu_ld" = yes; then
+    if test yes = "$lt_cv_prog_gnu_ld"; then
       case `/usr/bin/file conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -melf32bsmip"
@@ -1312,9 +1337,46 @@
   rm -rf conftest*
   ;;
 
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+mips64*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    emul=elf
+    case `/usr/bin/file conftest.$ac_objext` in
+      *32-bit*)
+	emul="${emul}32"
+	;;
+      *64-bit*)
+	emul="${emul}64"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *MSB*)
+	emul="${emul}btsmip"
+	;;
+      *LSB*)
+	emul="${emul}ltsmip"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *N32*)
+	emul="${emul}n32"
+	;;
+    esac
+    LD="${LD-ld} -m $emul"
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
 s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.  Note that the listed cases only cover the
+  # situations where additional linker options are needed (such as when
+  # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+  # vice versa); the common cases where no linker options are needed do
+  # not appear in the list.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.o` in
@@ -1324,9 +1386,19 @@
 	    LD="${LD-ld} -m elf_i386_fbsd"
 	    ;;
 	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_i386"
+	    case `/usr/bin/file conftest.o` in
+	      *x86-64*)
+		LD="${LD-ld} -m elf32_x86_64"
+		;;
+	      *)
+		LD="${LD-ld} -m elf_i386"
+		;;
+	    esac
 	    ;;
-	  ppc64-*linux*|powerpc64-*linux*)
+	  powerpc64le-*linux*)
+	    LD="${LD-ld} -m elf32lppclinux"
+	    ;;
+	  powerpc64-*linux*)
 	    LD="${LD-ld} -m elf32ppclinux"
 	    ;;
 	  s390x-*linux*)
@@ -1345,7 +1417,10 @@
 	  x86_64-*linux*)
 	    LD="${LD-ld} -m elf_x86_64"
 	    ;;
-	  ppc*-*linux*|powerpc*-*linux*)
+	  powerpcle-*linux*)
+	    LD="${LD-ld} -m elf64lppc"
+	    ;;
+	  powerpc-*linux*)
 	    LD="${LD-ld} -m elf64ppc"
 	    ;;
 	  s390*-*linux*|s390*-*tpf*)
@@ -1363,19 +1438,20 @@
 
 *-*-sco3.2v5*)
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
+  SAVE_CFLAGS=$CFLAGS
   CFLAGS="$CFLAGS -belf"
   AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
     [AC_LANG_PUSH(C)
      AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
      AC_LANG_POP])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+  if test yes != "$lt_cv_cc_needs_belf"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
+    CFLAGS=$SAVE_CFLAGS
   fi
   ;;
 *-*solaris*)
-  # Find out which ABI we are using.
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.o` in
@@ -1383,7 +1459,7 @@
       case $lt_cv_prog_gnu_ld in
       yes*)
         case $host in
-        i?86-*-solaris*)
+        i?86-*-solaris*|x86_64-*-solaris*)
           LD="${LD-ld} -m elf_x86_64"
           ;;
         sparc*-*-solaris*)
@@ -1392,7 +1468,7 @@
         esac
         # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
         if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
-          LD="${LD-ld}_sol2"
+          LD=${LD-ld}_sol2
         fi
         ;;
       *)
@@ -1408,7 +1484,7 @@
   ;;
 esac
 
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
 ])# _LT_ENABLE_LOCK
 
 
@@ -1427,11 +1503,11 @@
      [echo conftest.$ac_objext > conftest.lst
       lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
       AC_TRY_EVAL([lt_ar_try])
-      if test "$ac_status" -eq 0; then
+      if test 0 -eq "$ac_status"; then
 	# Ensure the archiver fails upon bogus file names.
 	rm -f conftest.$ac_objext libconftest.a
 	AC_TRY_EVAL([lt_ar_try])
-	if test "$ac_status" -ne 0; then
+	if test 0 -ne "$ac_status"; then
           lt_cv_ar_at_file=@
         fi
       fi
@@ -1439,7 +1515,7 @@
      ])
   ])
 
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
   archiver_list_spec=
 else
   archiver_list_spec=$lt_cv_ar_at_file
@@ -1470,7 +1546,7 @@
 
 if test -n "$RANLIB"; then
   case $host_os in
-  openbsd*)
+  bitrig* | openbsd*)
     old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
     ;;
   *)
@@ -1506,7 +1582,7 @@
   [$2=no
    m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$3"
+   lt_compiler_flag="$3"  ## exclude from sc_useless_quotes_in_assignment
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
    # Note that $ac_compile itself does not contain backslashes and begins
@@ -1533,7 +1609,7 @@
    $RM conftest*
 ])
 
-if test x"[$]$2" = xyes; then
+if test yes = "[$]$2"; then
     m4_if([$5], , :, [$5])
 else
     m4_if([$6], , :, [$6])
@@ -1555,7 +1631,7 @@
 m4_require([_LT_DECL_SED])dnl
 AC_CACHE_CHECK([$1], [$2],
   [$2=no
-   save_LDFLAGS="$LDFLAGS"
+   save_LDFLAGS=$LDFLAGS
    LDFLAGS="$LDFLAGS $3"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -1574,10 +1650,10 @@
      fi
    fi
    $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+   LDFLAGS=$save_LDFLAGS
 ])
 
-if test x"[$]$2" = xyes; then
+if test yes = "[$]$2"; then
     m4_if([$4], , :, [$4])
 else
     m4_if([$5], , :, [$5])
@@ -1598,7 +1674,7 @@
 AC_MSG_CHECKING([the maximum length of command line arguments])
 AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
   i=0
-  teststring="ABCD"
+  teststring=ABCD
 
   case $build_os in
   msdosdjgpp*)
@@ -1638,7 +1714,7 @@
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+  bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
     # This has been around since 386BSD, at least.  Likely further.
     if test -x /sbin/sysctl; then
       lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -1688,22 +1764,23 @@
     ;;
   *)
     lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+       test undefined != "$lt_cv_sys_max_cmd_len"; then
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
     else
       # Make teststring a little bigger before we do anything with it.
       # a 1K string should be a reasonable start.
-      for i in 1 2 3 4 5 6 7 8 ; do
+      for i in 1 2 3 4 5 6 7 8; do
         teststring=$teststring$teststring
       done
       SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
-      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+      while { test X`env echo "$teststring$teststring" 2>/dev/null` \
 	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
-	      test $i != 17 # 1/2 MB should be enough
+	      test 17 != "$i" # 1/2 MB should be enough
       do
         i=`expr $i + 1`
         teststring=$teststring$teststring
@@ -1719,7 +1796,7 @@
     ;;
   esac
 ])
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
   AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
 else
   AC_MSG_RESULT(none)
@@ -1747,7 +1824,7 @@
 # ----------------------------------------------------------------
 m4_defun([_LT_TRY_DLOPEN_SELF],
 [m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
+if test yes = "$cross_compiling"; then :
   [$4]
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -1794,9 +1871,9 @@
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
    correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
 int fnord () __attribute__((visibility("default")));
 #endif
 
@@ -1822,7 +1899,7 @@
   return status;
 }]
 _LT_EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+  if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
     (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
     lt_status=$?
     case x$lt_status in
@@ -1843,7 +1920,7 @@
 # ------------------
 AC_DEFUN([LT_SYS_DLOPEN_SELF],
 [m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
+if test yes != "$enable_dlopen"; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
   enable_dlopen_self_static=unknown
@@ -1853,44 +1930,52 @@
 
   case $host_os in
   beos*)
-    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen=load_add_on
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
     ;;
 
   mingw* | pw32* | cegcc*)
-    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen=LoadLibrary
     lt_cv_dlopen_libs=
     ;;
 
   cygwin*)
-    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen=dlopen
     lt_cv_dlopen_libs=
     ;;
 
   darwin*)
-  # if libdl is installed we need to link against it
+    # if libdl is installed we need to link against it
     AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-    lt_cv_dlopen="dyld"
+		[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[
+    lt_cv_dlopen=dyld
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
     ])
     ;;
 
+  tpf*)
+    # Don't try to run any link tests for TPF.  We know it's impossible
+    # because TPF is a cross-compiler, and we know how we open DSOs.
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=no
+    ;;
+
   *)
     AC_CHECK_FUNC([shl_load],
-	  [lt_cv_dlopen="shl_load"],
+	  [lt_cv_dlopen=shl_load],
       [AC_CHECK_LIB([dld], [shl_load],
-	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+	    [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld],
 	[AC_CHECK_FUNC([dlopen],
-	      [lt_cv_dlopen="dlopen"],
+	      [lt_cv_dlopen=dlopen],
 	  [AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+		[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],
 	    [AC_CHECK_LIB([svld], [dlopen],
-		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+		  [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld],
 	      [AC_CHECK_LIB([dld], [dld_link],
-		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+		    [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld])
 	      ])
 	    ])
 	  ])
@@ -1899,21 +1984,21 @@
     ;;
   esac
 
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
+  if test no = "$lt_cv_dlopen"; then
     enable_dlopen=no
+  else
+    enable_dlopen=yes
   fi
 
   case $lt_cv_dlopen in
   dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+    save_CPPFLAGS=$CPPFLAGS
+    test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
-    save_LDFLAGS="$LDFLAGS"
+    save_LDFLAGS=$LDFLAGS
     wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
-    save_LIBS="$LIBS"
+    save_LIBS=$LIBS
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
     AC_CACHE_CHECK([whether a program can dlopen itself],
@@ -1923,7 +2008,7 @@
 	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
     ])
 
-    if test "x$lt_cv_dlopen_self" = xyes; then
+    if test yes = "$lt_cv_dlopen_self"; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
 	  lt_cv_dlopen_self_static, [dnl
@@ -1933,9 +2018,9 @@
       ])
     fi
 
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
+    CPPFLAGS=$save_CPPFLAGS
+    LDFLAGS=$save_LDFLAGS
+    LIBS=$save_LIBS
     ;;
   esac
 
@@ -2027,8 +2112,8 @@
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 _LT_COMPILER_C_O([$1])
 
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
   # do not overwrite the value of need_locks provided by the user
   AC_MSG_CHECKING([if we can lock with hard links])
   hard_links=yes
@@ -2038,8 +2123,8 @@
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   AC_MSG_RESULT([$hard_links])
-  if test "$hard_links" = no; then
-    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+  if test no = "$hard_links"; then
+    AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe])
     need_locks=warn
   fi
 else
@@ -2066,8 +2151,8 @@
 _LT_DECL([], [objdir], [0],
          [The name of the directory that contains temporary libtool files])dnl
 m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
-  [Define to the sub-directory in which libtool stores uninstalled libraries.])
+AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/",
+  [Define to the sub-directory where libtool stores uninstalled libraries.])
 ])# _LT_CHECK_OBJDIR
 
 
@@ -2079,15 +2164,15 @@
 _LT_TAGVAR(hardcode_action, $1)=
 if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
    test -n "$_LT_TAGVAR(runpath_var, $1)" ||
-   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+   test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then
 
   # We can hardcode non-existent directories.
-  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+  if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
+     test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
     # Linking always hardcodes the temporary library directory.
     _LT_TAGVAR(hardcode_action, $1)=relink
   else
@@ -2101,12 +2186,12 @@
 fi
 AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
 
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
-   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
+   test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
   # Fast installation is not supported
   enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
@@ -2130,7 +2215,7 @@
 # FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
   darwin*)
-    if test -n "$STRIP" ; then
+    if test -n "$STRIP"; then
       striplib="$STRIP -x"
       old_striplib="$STRIP -S"
       AC_MSG_RESULT([yes])
@@ -2148,6 +2233,47 @@
 ])# _LT_CMD_STRIPLIB
 
 
+# _LT_PREPARE_MUNGE_PATH_LIST
+# ---------------------------
+# Make sure func_munge_path_list() is defined correctly.
+m4_defun([_LT_PREPARE_MUNGE_PATH_LIST],
+[[# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x@S|@2 in
+    x)
+        ;;
+    *:)
+        eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
+        ;;
+    x:*)
+        eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
+        ;;
+    *)
+        eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+]])# _LT_PREPARE_PATH_LIST
+
+
 # _LT_SYS_DYNAMIC_LINKER([TAG])
 # -----------------------------
 # PORTME Fill in your ld.so characteristics
@@ -2158,17 +2284,18 @@
 m4_require([_LT_DECL_OBJDUMP])dnl
 m4_require([_LT_DECL_SED])dnl
 m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl
 AC_MSG_CHECKING([dynamic linker characteristics])
 m4_if([$1],
 	[], [
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
+    darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+    *) lt_awk_arg='/^libraries:/' ;;
   esac
   case $host_os in
-    mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
-    *) lt_sed_strip_eq="s,=/,/,g" ;;
+    mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;;
+    *) lt_sed_strip_eq='s|=/|/|g' ;;
   esac
   lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
   case $lt_search_path_spec in
@@ -2184,28 +2311,35 @@
     ;;
   esac
   # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
+  # and add multilib dir if necessary...
   lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  # ...but if some path component already ends with the multilib dir we assume
+  # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+  case "$lt_multi_os_dir; $lt_search_path_spec " in
+  "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+    lt_multi_os_dir=
+    ;;
+  esac
   for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
+    if test -d "$lt_sys_path$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+    elif test -n "$lt_multi_os_dir"; then
       test -d "$lt_sys_path" && \
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
   lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+  lt_foo = "";
+  lt_count = 0;
   for (lt_i = NF; lt_i > 0; lt_i--) {
     if ($lt_i != "" && $lt_i != ".") {
       if ($lt_i == "..") {
         lt_count++;
       } else {
         if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
+          lt_foo = "/" $lt_i lt_foo;
         } else {
           lt_count--;
         }
@@ -2219,7 +2353,7 @@
   # for these hosts.
   case $host_os in
     mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
-      $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+      $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;;
   esac
   sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
 else
@@ -2228,7 +2362,7 @@
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
 postinstall_cmds=
 postuninstall_cmds=
 finish_cmds=
@@ -2245,14 +2379,17 @@
 # flags to be left without arguments
 need_version=unknown
 
+AC_ARG_VAR([LT_SYS_LIBRARY_PATH],
+[User-defined run-time library search path.])
+
 case $host_os in
 aix3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
   # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
+  soname_spec='$libname$release$shared_ext$major'
   ;;
 
 aix[[4-9]]*)
@@ -2260,41 +2397,91 @@
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
     shlibpath_var=LD_LIBRARY_PATH
   else
     # With GCC up to 2.95.x, collect2 would create an import file
     # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
     # development snapshots of GCC prior to 3.0.
     case $host_os in
       aix4 | aix4.[[01]] | aix4.[[01]].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
       fi
       ;;
     esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
     # soname into executable. Probably we can add versioning support to
     # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
       # If using run time linking (on AIX 4.2 or later) use lib<name>.so
       # instead of lib<name>.a to let people know that these are not
       # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a[(]lib.so.V[)]'
       # We preserve .a as extension for shared libraries through AIX4.2
       # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
     shlibpath_var=LIBPATH
   fi
   ;;
@@ -2304,18 +2491,18 @@
   powerpc)
     # Since July 2007 AmigaOS4 officially supports .so libraries.
     # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
     ;;
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
 
 beos*)
-  library_names_spec='${libname}${shared_ext}'
+  library_names_spec='$libname$shared_ext'
   dynamic_linker="$host_os ld.so"
   shlibpath_var=LIBRARY_PATH
   ;;
@@ -2323,8 +2510,8 @@
 bsdi[[45]]*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -2336,7 +2523,7 @@
 
 cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
-  shrext_cmds=".dll"
+  shrext_cmds=.dll
   need_version=no
   need_lib_prefix=no
 
@@ -2345,8 +2532,8 @@
     # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
@@ -2362,17 +2549,17 @@
     case $host_os in
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
 m4_if([$1], [],[
       sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
       ;;
     esac
     dynamic_linker='Win32 ld.exe'
@@ -2381,8 +2568,8 @@
   *,cl*)
     # Native MSVC
     libname_spec='$name'
-    soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-    library_names_spec='${libname}.dll.lib'
+    soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
 
     case $build_os in
     mingw*)
@@ -2409,7 +2596,7 @@
       sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
       ;;
     *)
-      sys_lib_search_path_spec="$LIB"
+      sys_lib_search_path_spec=$LIB
       if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
         # It is most probably a Windows format PATH.
         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -2422,8 +2609,8 @@
     esac
 
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname'
@@ -2436,7 +2623,7 @@
 
   *)
     # Assume MSVC wrapper
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
     dynamic_linker='Win32 ld.exe'
     ;;
   esac
@@ -2449,8 +2636,8 @@
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -2463,8 +2650,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -2482,12 +2669,13 @@
   version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
       need_version=no
       need_lib_prefix=no
       ;;
     freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
       need_version=yes
       ;;
   esac
@@ -2512,26 +2700,15 @@
   esac
   ;;
 
-gnu*)
-  version_type=linux # correct to gnu/linux during the next big refactor
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
 haiku*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
   sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
@@ -2549,14 +2726,15 @@
     dynamic_linker="$host_os dld.so"
     shlibpath_var=LD_LIBRARY_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
       sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
     else
       sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
     fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
   hppa*64*)
     shrext_cmds='.sl'
@@ -2564,8 +2742,8 @@
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
@@ -2574,8 +2752,8 @@
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     ;;
   esac
   # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -2588,8 +2766,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -2600,7 +2778,7 @@
   case $host_os in
     nonstopux*) version_type=nonstopux ;;
     *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
+	if test yes = "$lt_cv_prog_gnu_ld"; then
 		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
@@ -2608,8 +2786,8 @@
   esac
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
   case $host_os in
   irix5* | nonstopux*)
     libsuff= shlibsuff=
@@ -2628,8 +2806,8 @@
   esac
   shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
   shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
   hardcode_into_libs=yes
   ;;
 
@@ -2638,13 +2816,33 @@
   dynamic_linker=no
   ;;
 
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+  ;;
+
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
@@ -2669,7 +2867,12 @@
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # Append ld.so.conf contents to the search path
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
   if test -f /etc/ld.so.conf; then
     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
@@ -2689,12 +2892,12 @@
   need_lib_prefix=no
   need_version=no
   if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
     dynamic_linker='NetBSD ld.elf_so'
   fi
   shlibpath_var=LD_LIBRARY_PATH
@@ -2704,7 +2907,7 @@
 
 newsos6)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   ;;
@@ -2713,58 +2916,68 @@
   version_type=qnx
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
   dynamic_linker='ldqnx.so'
   ;;
 
-openbsd*)
+openbsd* | bitrig*)
   version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
+  sys_lib_dlsearch_path_spec=/usr/lib
   need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
+  else
+    need_version=yes
+  fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[[89]] | openbsd2.[[89]].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
+  shlibpath_overrides_runpath=yes
   ;;
 
 os2*)
   libname_spec='$name'
-  shrext_cmds=".dll"
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
   need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
   dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
   ;;
 
 osf3* | osf4* | osf5*)
   version_type=osf
   need_lib_prefix=no
   need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
   ;;
 
 rdos*)
@@ -2775,8 +2988,8 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
@@ -2786,11 +2999,11 @@
 
 sunos4*)
   version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
   finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     need_lib_prefix=no
   fi
   need_version=yes
@@ -2798,8 +3011,8 @@
 
 sysv4 | sysv4.3*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   case $host_vendor in
     sni)
@@ -2820,24 +3033,24 @@
   ;;
 
 sysv4*MP*)
-  if test -d /usr/nec ;then
+  if test -d /usr/nec; then
     version_type=linux # correct to gnu/linux during the next big refactor
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
     shlibpath_var=LD_LIBRARY_PATH
   fi
   ;;
 
 sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
+  version_type=sco
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -2855,7 +3068,7 @@
   version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
@@ -2863,8 +3076,8 @@
 
 uts4*)
   version_type=linux # correct to gnu/linux during the next big refactor
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
@@ -2873,20 +3086,30 @@
   ;;
 esac
 AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
 fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
 fi
 
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
 _LT_DECL([], [variables_saved_for_relink], [1],
     [Variables whose values should be saved in libtool wrapper scripts and
     restored at link time])
@@ -2919,39 +3142,41 @@
     [Whether we should hardcode library paths into libraries])
 _LT_DECL([], [sys_lib_search_path_spec], [2],
     [Compile-time system search path for libraries])
-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
-    [Run-time system search path for libraries])
+_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2],
+    [Detected run-time system search path for libraries])
+_LT_DECL([], [configure_time_lt_sys_library_path], [2],
+    [Explicit LT_SYS_LIBRARY_PATH set during ./configure time])
 ])# _LT_SYS_DYNAMIC_LINKER
 
 
 # _LT_PATH_TOOL_PREFIX(TOOL)
 # --------------------------
-# find a file program which can recognize shared library
+# find a file program that can recognize shared library
 AC_DEFUN([_LT_PATH_TOOL_PREFIX],
 [m4_require([_LT_DECL_EGREP])dnl
 AC_MSG_CHECKING([for $1])
 AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
 [case $MAGIC_CMD in
 [[\\/*] |  ?:[\\/]*])
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
   ;;
 *)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
 dnl $ac_dummy forces splitting on constant user-supplied paths.
 dnl POSIX.2 word splitting is done only on the output of word expansions,
 dnl not every word.  This closes a longstanding sh security hole.
   ac_dummy="m4_if([$2], , $PATH, [$2])"
   for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+    if test -f "$ac_dir/$1"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
       if test -n "$file_magic_test_file"; then
 	case $deplibs_check_method in
 	"file_magic "*)
 	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
@@ -2974,11 +3199,11 @@
       break
     fi
   done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
   ;;
 esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
 if test -n "$MAGIC_CMD"; then
   AC_MSG_RESULT($MAGIC_CMD)
 else
@@ -2996,7 +3221,7 @@
 
 # _LT_PATH_MAGIC
 # --------------
-# find a file program which can recognize a shared library
+# find a file program that can recognize a shared library
 m4_defun([_LT_PATH_MAGIC],
 [_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
 if test -z "$lt_cv_path_MAGIC_CMD"; then
@@ -3023,16 +3248,16 @@
 AC_ARG_WITH([gnu-ld],
     [AS_HELP_STRING([--with-gnu-ld],
 	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
+    [test no = "$withval" || with_gnu_ld=yes],
     [with_gnu_ld=no])dnl
 
 ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   # Check if gcc -print-prog-name=ld gives a path.
   AC_MSG_CHECKING([for ld used by $CC])
   case $host in
   *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
+    # gcc leaves a trailing carriage return, which upsets mingw
     ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
   *)
     ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -3046,7 +3271,7 @@
       while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
 	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
-      test -z "$LD" && LD="$ac_prog"
+      test -z "$LD" && LD=$ac_prog
       ;;
   "")
     # If it fails, then pretend we aren't using GCC.
@@ -3057,37 +3282,37 @@
     with_gnu_ld=unknown
     ;;
   esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
   AC_MSG_CHECKING([for GNU ld])
 else
   AC_MSG_CHECKING([for non-GNU ld])
 fi
 AC_CACHE_VAL(lt_cv_path_LD,
 [if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
   for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
     test -z "$ac_dir" && ac_dir=.
     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
+      lt_cv_path_LD=$ac_dir/$ac_prog
       # Check to see if the program is GNU ld.  I'd rather use --version,
       # but apparently some variants of GNU ld only accept -v.
       # Break only if it was the GNU/non-GNU ld that we prefer.
       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
       *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
+	test no != "$with_gnu_ld" && break
 	;;
       *)
-	test "$with_gnu_ld" != yes && break
+	test yes != "$with_gnu_ld" && break
 	;;
       esac
     fi
   done
-  IFS="$lt_save_ifs"
+  IFS=$lt_save_ifs
 else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
 fi])
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
 if test -n "$LD"; then
   AC_MSG_RESULT($LD)
 else
@@ -3141,13 +3366,13 @@
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
 case $host_os in
   cygwin* | mingw* | pw32* | cegcc*)
-    if test "$GCC" != yes; then
+    if test yes != "$GCC"; then
       reload_cmds=false
     fi
     ;;
   darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    if test yes = "$GCC"; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
     else
       reload_cmds='$LD$reload_flag -o $output$reload_objs'
     fi
@@ -3158,6 +3383,43 @@
 ])# _LT_CMD_RELOAD
 
 
+# _LT_PATH_DD
+# -----------
+# find a working dd
+m4_defun([_LT_PATH_DD],
+[AC_CACHE_CHECK([for a working dd], [ac_cv_path_lt_DD],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd],
+[if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi])
+rm -f conftest.i conftest2.i conftest.out])
+])# _LT_PATH_DD
+
+
+# _LT_CMD_TRUNCATE
+# ----------------
+# find command to truncate a binary pipe
+m4_defun([_LT_CMD_TRUNCATE],
+[m4_require([_LT_PATH_DD])
+AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"])
+_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1],
+  [Command to truncate a binary pipe])
+])# _LT_CMD_TRUNCATE
+
+
 # _LT_CHECK_MAGIC_METHOD
 # ----------------------
 # how to check for library dependencies
@@ -3173,13 +3435,13 @@
 # Need to set the preceding variable on all platforms that support
 # interlibrary dependencies.
 # 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
 # 'pass_all' -- all dependencies passed with no checks.
 # 'test_compile' -- check by making test program.
 # 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
 
 case $host_os in
 aix[[4-9]]*)
@@ -3206,8 +3468,7 @@
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
-  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
-  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+  if ( file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
@@ -3243,10 +3504,6 @@
   fi
   ;;
 
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
 haiku*)
   lt_cv_deplibs_check_method=pass_all
   ;;
@@ -3285,7 +3542,7 @@
   ;;
 
 # This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -3307,8 +3564,8 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
@@ -3361,6 +3618,9 @@
 tpf*)
   lt_cv_deplibs_check_method=pass_all
   ;;
+os2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 esac
 ])
 
@@ -3401,33 +3661,38 @@
 AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
 [if test -n "$NM"; then
   # Let the user override the test.
-  lt_cv_path_NM="$NM"
+  lt_cv_path_NM=$NM
 else
-  lt_nm_to_check="${ac_tool_prefix}nm"
+  lt_nm_to_check=${ac_tool_prefix}nm
   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
     lt_nm_to_check="$lt_nm_to_check nm"
   fi
   for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
     for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+      tmp_nm=$ac_dir/$lt_tmp_nm
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
 	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	# Adding the 'sed 1q' prevents false positives on HP-UX, which says:
 	#   nm: unknown option "B" ignored
 	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
+	# MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+	case $build_os in
+	mingw*) lt_bad_file=conftest.nm/nofile ;;
+	*) lt_bad_file=/dev/null ;;
+	esac
+	case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+	*$lt_bad_file* | *'Invalid file or object type'*)
 	  lt_cv_path_NM="$tmp_nm -B"
-	  break
+	  break 2
 	  ;;
 	*)
 	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
 	  */dev/null*)
 	    lt_cv_path_NM="$tmp_nm -p"
-	    break
+	    break 2
 	    ;;
 	  *)
 	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
@@ -3438,21 +3703,21 @@
 	esac
       fi
     done
-    IFS="$lt_save_ifs"
+    IFS=$lt_save_ifs
   done
   : ${lt_cv_path_NM=no}
 fi])
-if test "$lt_cv_path_NM" != "no"; then
-  NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+  NM=$lt_cv_path_NM
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
   if test -n "$DUMPBIN"; then :
     # Let the user override the test.
   else
     AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
-    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
     *COFF*)
-      DUMPBIN="$DUMPBIN -symbols"
+      DUMPBIN="$DUMPBIN -symbols -headers"
       ;;
     *)
       DUMPBIN=:
@@ -3460,8 +3725,8 @@
     esac
   fi
   AC_SUBST([DUMPBIN])
-  if test "$DUMPBIN" != ":"; then
-    NM="$DUMPBIN"
+  if test : != "$DUMPBIN"; then
+    NM=$DUMPBIN
   fi
 fi
 test -z "$NM" && NM=nm
@@ -3507,8 +3772,8 @@
 
 case $host_os in
 cygwin* | mingw* | pw32* | cegcc*)
-  # two different shell functions defined in ltmain.sh
-  # decide which to use based on capabilities of $DLLTOOL
+  # two different shell functions defined in ltmain.sh;
+  # decide which one to use based on capabilities of $DLLTOOL
   case `$DLLTOOL --help 2>&1` in
   *--identify-strict*)
     lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
@@ -3520,7 +3785,7 @@
   ;;
 *)
   # fallback: assume linklib IS sharedlib
-  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  lt_cv_sharedlib_from_linklib_cmd=$ECHO
   ;;
 esac
 ])
@@ -3547,13 +3812,28 @@
     lt_cv_path_mainfest_tool=yes
   fi
   rm -f conftest*])
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
   MANIFEST_TOOL=:
 fi
 _LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
 ])# _LT_PATH_MANIFEST_TOOL
 
 
+# _LT_DLL_DEF_P([FILE])
+# ---------------------
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with func_dll_def_p in the libtool script
+AC_DEFUN([_LT_DLL_DEF_P],
+[dnl
+  test DEF = "`$SED -n dnl
+    -e '\''s/^[[	 ]]*//'\'' dnl Strip leading whitespace
+    -e '\''/^\(;.*\)*$/d'\'' dnl      Delete empty lines and comments
+    -e '\''s/^\(EXPORTS\|LIBRARY\)\([[	 ]].*\)*$/DEF/p'\'' dnl
+    -e q dnl                          Only consider the first "real" line
+    $1`" dnl
+])# _LT_DLL_DEF_P
+
+
 # LT_LIB_M
 # --------
 # check for math library
@@ -3565,11 +3845,11 @@
   # These system don't have libm, or don't need it
   ;;
 *-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
   AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
   ;;
 *)
-  AC_CHECK_LIB(m, cos, LIBM="-lm")
+  AC_CHECK_LIB(m, cos, LIBM=-lm)
   ;;
 esac
 AC_SUBST([LIBM])
@@ -3588,7 +3868,7 @@
 
 _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
   case $cc_basename in
   nvcc*)
     _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
@@ -3640,7 +3920,7 @@
   symcode='[[ABCDGISTW]]'
   ;;
 hpux*)
-  if test "$host_cpu" = ia64; then
+  if test ia64 = "$host_cpu"; then
     symcode='[[ABCDEGRST]]'
   fi
   ;;
@@ -3673,14 +3953,44 @@
   symcode='[[ABCDGIRSTW]]' ;;
 esac
 
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  # Gets list of data symbols to import.
+  lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+  # Adjust the below global symbol transforms to fixup imported variables.
+  lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+  lt_c_name_hook=" -e 's/^I .* \(.*\)$/  {\"\1\", (void *) 0},/p'"
+  lt_c_name_lib_hook="\
+  -e 's/^I .* \(lib.*\)$/  {\"\1\", (void *) 0},/p'\
+  -e 's/^I .* \(.*\)$/  {\"lib\1\", (void *) 0},/p'"
+else
+  # Disable hooks by default.
+  lt_cv_sys_global_symbol_to_import=
+  lt_cdecl_hook=
+  lt_c_name_hook=
+  lt_c_name_lib_hook=
+fi
+
 # Transform an extracted symbol line into a proper C declaration.
 # Some systems (esp. on ia64) link data and code symbols differently,
 # so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/  {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"lib\1\", (void *) \&\1},/p'"
 
 # Handle CRLF in mingw tool chain
 opt_cr=
@@ -3698,21 +4008,24 @@
 
   # Write the raw and C identifiers.
   if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-    # Fake it for dumpbin and say T for any non-static function
-    # and D for any global variable.
+    # Fake it for dumpbin and say T for any non-static function,
+    # D for any global variable and I for any imported variable.
     # Also find C++ and __fastcall symbols from MSVC++,
     # which start with @ or ?.
     lt_cv_sys_global_symbol_pipe="$AWK ['"\
 "     {last_section=section; section=\$ 3};"\
 "     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
 "     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+"     /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+"     /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
 "     \$ 0!~/External *\|/{next};"\
 "     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
 "     {if(hide[section]) next};"\
-"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
-"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+"     {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+"     s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
 "     ' prfx=^$ac_symprfx]"
   else
     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
@@ -3752,11 +4065,11 @@
 	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
 	  cat <<_LT_EOF > conftest.$ac_ext
 /* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
    relocations are performed -- see ld's documentation on pseudo-relocs.  */
 # define LT@&t@_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
 /* This system does not cope well with relocations in const data.  */
 # define LT@&t@_DLSYM_CONST
 #else
@@ -3782,7 +4095,7 @@
 {
   { "@PROGRAM@", (void *) 0 },
 _LT_EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  $SED "s/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
 	  cat <<\_LT_EOF >> conftest.$ac_ext
   {0, (void *) 0}
 };
@@ -3802,9 +4115,9 @@
 	  mv conftest.$ac_objext conftstm.$ac_objext
 	  lt_globsym_save_LIBS=$LIBS
 	  lt_globsym_save_CFLAGS=$CFLAGS
-	  LIBS="conftstm.$ac_objext"
+	  LIBS=conftstm.$ac_objext
 	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+	  if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
 	    pipe_works=yes
 	  fi
 	  LIBS=$lt_globsym_save_LIBS
@@ -3825,7 +4138,7 @@
   rm -rf conftest* conftst*
 
   # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
+  if test yes = "$pipe_works"; then
     break
   else
     lt_cv_sys_global_symbol_pipe=
@@ -3852,12 +4165,16 @@
     [Take the output of nm and produce a listing of raw symbols and C names])
 _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
     [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1],
+    [Transform the output of nm into a list of symbols to manually relocate])
 _LT_DECL([global_symbol_to_c_name_address],
     [lt_cv_sys_global_symbol_to_c_name_address], [1],
     [Transform the output of nm in a C name address pair])
 _LT_DECL([global_symbol_to_c_name_address_lib_prefix],
     [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
     [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([nm_interface], [lt_cv_nm_interface], [1],
+    [The name lister interface])
 _LT_DECL([], [nm_file_list_spec], [1],
     [Specify filename containing input files for $NM])
 ]) # _LT_CMD_GLOBAL_SYMBOLS
@@ -3873,17 +4190,18 @@
 
 m4_if([$1], [CXX], [
   # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
+  if test yes = "$GXX"; then
     _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
     _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
     case $host_os in
     aix*)
       # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
 
     amigaos*)
@@ -3894,8 +4212,8 @@
         ;;
       m68k)
             # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
             _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
@@ -3911,6 +4229,11 @@
       # (--disable-auto-import) libraries
       m4_if([$1], [GCJ], [],
 	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      case $host_os in
+      os2*)
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+	;;
+      esac
       ;;
     darwin* | rhapsody*)
       # PIC is the default on this platform
@@ -3960,7 +4283,7 @@
     case $host_os in
       aix[[4-9]]*)
 	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
+	if test ia64 = "$host_cpu"; then
 	  # AIX 5 now supports IA64 processor
 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	else
@@ -4001,14 +4324,14 @@
 	case $cc_basename in
 	  CC*)
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+	    if test ia64 != "$host_cpu"; then
 	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	    fi
 	    ;;
 	  aCC*)
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
 	    case $host_cpu in
 	    hppa*64*|ia64*)
 	      # +Z the default
@@ -4037,7 +4360,7 @@
 	    ;;
 	esac
 	;;
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
 	case $cc_basename in
 	  KCC*)
 	    # KAI C++ Compiler
@@ -4045,7 +4368,7 @@
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	    ;;
 	  ecpc* )
-	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    # old Intel C++ for x86_64, which still supported -KPIC.
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
@@ -4190,17 +4513,18 @@
   fi
 ],
 [
-  if test "$GCC" = yes; then
+  if test yes = "$GCC"; then
     _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
     _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
     case $host_os in
       aix*)
       # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
 
     amigaos*)
@@ -4211,8 +4535,8 @@
         ;;
       m68k)
             # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
             _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
@@ -4229,6 +4553,11 @@
       # (--disable-auto-import) libraries
       m4_if([$1], [GCJ], [],
 	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      case $host_os in
+      os2*)
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+	;;
+      esac
       ;;
 
     darwin* | rhapsody*)
@@ -4299,7 +4628,7 @@
     case $host_os in
     aix*)
       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# AIX 5 now supports IA64 processor
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       else
@@ -4307,11 +4636,30 @@
       fi
       ;;
 
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      case $cc_basename in
+      nagfor*)
+        # NAG Fortran compiler
+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      esac
+      ;;
+
     mingw* | cygwin* | pw32* | os2* | cegcc*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
       m4_if([$1], [GCJ], [],
 	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      case $host_os in
+      os2*)
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+	;;
+      esac
       ;;
 
     hpux9* | hpux10* | hpux11*)
@@ -4327,7 +4675,7 @@
 	;;
       esac
       # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
       ;;
 
     irix5* | irix6* | nonstopux*)
@@ -4336,9 +4684,9 @@
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
 
-    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
       case $cc_basename in
-      # old Intel for x86_64 which still supported -KPIC.
+      # old Intel for x86_64, which still supported -KPIC.
       ecc*)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
@@ -4363,6 +4711,12 @@
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	;;
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	;;
       pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
@@ -4460,7 +4814,7 @@
       ;;
 
     sysv4*MP*)
-      if test -d /usr/nec ;then
+      if test -d /usr/nec; then
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
@@ -4489,7 +4843,7 @@
   fi
 ])
 case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
+  # For platforms that do not support PIC, -DPIC is meaningless:
   *djgpp*)
     _LT_TAGVAR(lt_prog_compiler_pic, $1)=
     ;;
@@ -4555,17 +4909,21 @@
   case $host_os in
   aix[[4-9]]*)
     # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    # Also, AIX nm treats weak defined symbols like other global defined
-    # symbols, whereas GNU nm marks them as "W".
+    # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+    # Without the "-l" option, or with the "-B" option, AIX nm treats
+    # weak defined symbols like other global defined symbols, whereas
+    # GNU nm marks them as "W".
+    # While the 'weak' keyword is ignored in the Export File, we need
+    # it in the Import File for the 'aix-soname' feature, so we have
+    # to replace the "-B" option with "-P" for AIX nm.
     if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
     else
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
     fi
     ;;
   pw32*)
-    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+    _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
     ;;
   cygwin* | mingw* | cegcc*)
     case $cc_basename in
@@ -4611,9 +4969,9 @@
   # included in the symbol list
   _LT_TAGVAR(include_expsyms, $1)=
   # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
+  # it will be wrapped by ' (' and ')$', so one must not match beginning or
+  # end of line.  Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+  # as well as any symbol that contains 'd'.
   _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
@@ -4629,7 +4987,7 @@
     # FIXME: the MSVC++ port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
     # Microsoft Visual C++.
-    if test "$GCC" != yes; then
+    if test yes != "$GCC"; then
       with_gnu_ld=no
     fi
     ;;
@@ -4637,7 +4995,7 @@
     # we just hope/assume this is gcc and not c89 (= MSVC++)
     with_gnu_ld=yes
     ;;
-  openbsd*)
+  openbsd* | bitrig*)
     with_gnu_ld=no
     ;;
   esac
@@ -4647,7 +5005,7 @@
   # On some targets, GNU ld is compatible enough with the native linker
   # that we're better off using the native interface for both.
   lt_use_gnu_ld_interface=no
-  if test "$with_gnu_ld" = yes; then
+  if test yes = "$with_gnu_ld"; then
     case $host_os in
       aix*)
 	# The AIX port of GNU ld has always aspired to compatibility
@@ -4669,24 +5027,24 @@
     esac
   fi
 
-  if test "$lt_use_gnu_ld_interface" = yes; then
+  if test yes = "$lt_use_gnu_ld_interface"; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
+    wlarc='$wl'
 
     # Set some defaults for GNU ld with shared library support. These
     # are reset later if shared libraries are not supported. Putting them
     # here allows them to be overridden if necessary.
     runpath_var=LD_RUN_PATH
-    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
     # ancient GNU ld didn't support --whole-archive et. al.
     if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
     else
       _LT_TAGVAR(whole_archive_flag_spec, $1)=
     fi
     supports_anon_versioning=no
-    case `$LD -v 2>&1` in
+    case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
       *GNU\ gold*) supports_anon_versioning=yes ;;
       *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -4699,7 +5057,7 @@
     case $host_os in
     aix[[3-9]]*)
       # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
+      if test ia64 != "$host_cpu"; then
 	_LT_TAGVAR(ld_shlibs, $1)=no
 	cat <<_LT_EOF 1>&2
 
@@ -4718,7 +5076,7 @@
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
             _LT_TAGVAR(archive_expsym_cmds, $1)=''
         ;;
       m68k)
@@ -4734,7 +5092,7 @@
 	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	# support --undefined.  This deserves some investigation.  FIXME
-	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
@@ -4744,7 +5102,7 @@
       # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
       # as there is no search path for DLLs.
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
       _LT_TAGVAR(always_export_symbols, $1)=no
       _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
@@ -4752,61 +5110,89 @@
       _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
 
       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file, use it as
+	# is; otherwise, prepend EXPORTS...
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+          cp $export_symbols $output_objdir/$soname.def;
+        else
+          echo EXPORTS > $output_objdir/$soname.def;
+          cat $export_symbols >> $output_objdir/$soname.def;
+        fi~
+        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
     haiku*)
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
       _LT_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
+    os2*)
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      shrext_cmds=.dll
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      ;;
+
     interix[[3-9]]*)
       _LT_TAGVAR(hardcode_direct, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
       # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
       # Instead, shared libraries are loaded at an image base (0x10000000 by
       # default) and relocated if they conflict, which is a slow very memory
       # consuming and fragmenting process.  To avoid this, we pick a random,
       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
     gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
       tmp_diet=no
-      if test "$host_os" = linux-dietlibc; then
+      if test linux-dietlibc = "$host_os"; then
 	case $cc_basename in
 	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
 	esac
       fi
       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-	 && test "$tmp_diet" = no
+	 && test no = "$tmp_diet"
       then
 	tmp_addflag=' $pic_flag'
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
 	pgf77* | pgf90* | pgf95* | pgfortran*)
 					# Portland Group f77 and f90 compilers
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
@@ -4817,42 +5203,47 @@
 	lf95*)				# Lahey Fortran 8.1
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
 	  tmp_sharedflag='--shared' ;;
+        nagfor*)                        # NAGFOR 5.3
+          tmp_sharedflag='-Wl,-shared' ;;
 	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
 	nvcc*)	# Cuda Compiler Driver 2.2
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  _LT_TAGVAR(compiler_needs_object, $1)=yes
 	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  _LT_TAGVAR(compiler_needs_object, $1)=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
 	  tmp_sharedflag='-G' ;;
 	esac
-	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
 
-        if test "x$supports_anon_versioning" = xyes; then
+        if test yes = "$supports_anon_versioning"; then
           _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	    echo "local: *; };" >> $output_objdir/$libname.ver~
-	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+            echo "local: *; };" >> $output_objdir/$libname.ver~
+            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
         fi
 
 	case $cc_basename in
+	tcc*)
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
+	  ;;
 	xlf* | bgf* | bgxlf* | mpixlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
 	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
-	  if test "x$supports_anon_versioning" = xyes; then
+	  if test yes = "$supports_anon_versioning"; then
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+              echo "local: *; };" >> $output_objdir/$libname.ver~
+              $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -4866,8 +5257,8 @@
 	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
@@ -4885,8 +5276,8 @@
 
 _LT_EOF
       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
@@ -4898,7 +5289,7 @@
 	_LT_TAGVAR(ld_shlibs, $1)=no
 	cat <<_LT_EOF 1>&2
 
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
 *** reliably create shared libraries on SCO systems.  Therefore, libtool
 *** is disabling shared libraries support.  We urge you to upgrade GNU
 *** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
@@ -4913,9 +5304,9 @@
 	  # DT_RUNPATH tag from executables and libraries.  But doing so
 	  # requires that you compile everything twice, which is a pain.
 	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	  else
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	  fi
@@ -4932,15 +5323,15 @@
 
     *)
       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
     esac
 
-    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+    if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
       runpath_var=
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
       _LT_TAGVAR(export_dynamic_flag_spec, $1)=
@@ -4956,7 +5347,7 @@
       # Note: this linker hardcodes the directories in LIBPATH if there
       # are no directories specified by -L.
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+      if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
 	# Neither direct hardcoding nor static linking is supported with a
 	# broken collect2.
 	_LT_TAGVAR(hardcode_direct, $1)=unsupported
@@ -4964,34 +5355,57 @@
       ;;
 
     aix[[4-9]]*)
-      if test "$host_cpu" = ia64; then
+      if test ia64 = "$host_cpu"; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
 	aix_use_runtimelinking=no
 	exp_sym_flag='-Bexport'
-	no_entry_flag=""
+	no_entry_flag=
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	# Also, AIX nm treats weak defined symbols like other global
-	# defined symbols, whereas GNU nm marks them as "W".
+	# -C means demangle to GNU nm, but means don't demangle to AIX nm.
+	# Without the "-l" option, or with the "-B" option, AIX nm treats
+	# weak defined symbols like other global defined symbols, whereas
+	# GNU nm marks them as "W".
+	# While the 'weak' keyword is ignored in the Export File, we need
+	# it in the Import File for the 'aix-soname' feature, so we have
+	# to replace the "-B" option with "-P" for AIX nm.
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
 	else
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
+	# have runtime linking enabled, and use it for executables.
+	# For shared libraries, we enable/disable runtime linking
+	# depending on the kind of the shared library created -
+	# when "with_aix_soname,aix_use_runtimelinking" is:
+	# "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "aix,yes"  lib.so          shared, rtl:yes, for executables
+	#            lib.a           static archive
+	# "both,no"  lib.so.V(shr.o) shared, rtl:yes
+	#            lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a(lib.so.V) shared, rtl:no
+	# "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a           static archive
 	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
 	  for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	  if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
 	    aix_use_runtimelinking=yes
 	    break
 	  fi
 	  done
+	  if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	    # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	    # so we don't have lib.a shared libs to link our executables.
+	    # We have to force runtime linking in this case.
+	    aix_use_runtimelinking=yes
+	    LDFLAGS="$LDFLAGS -Wl,-brtl"
+	  fi
 	  ;;
 	esac
 
@@ -5010,13 +5424,21 @@
       _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
       _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
       _LT_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+      _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+      case $with_aix_soname,$aix_use_runtimelinking in
+      aix,*) ;; # traditional, no import file
+      svr4,* | *,yes) # use import file
+	# The Import File defines what to hardcode.
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+	;;
+      esac
 
-      if test "$GCC" = yes; then
+      if test yes = "$GCC"; then
 	case $host_os in aix4.[[012]]|aix4.[[012]].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
+	  collect2name=`$CC -print-prog-name=collect2`
 	  if test -f "$collect2name" &&
 	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
@@ -5035,61 +5457,80 @@
 	  ;;
 	esac
 	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
+	if test yes = "$aix_use_runtimelinking"; then
+	  shared_flag="$shared_flag "'$wl-G'
 	fi
+	# Need to ensure runtime linking is disabled for the traditional
+	# shared library, or the linker may eventually find shared libraries
+	# /with/ Import File - we do not want to mix them.
+	shared_flag_aix='-shared'
+	shared_flag_svr4='-shared $wl-G'
       else
 	# not using gcc
-	if test "$host_cpu" = ia64; then
+	if test ia64 = "$host_cpu"; then
 	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 	# chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
 	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag='$wl-G'
 	  else
-	    shared_flag='${wl}-bM:SRE'
+	    shared_flag='$wl-bM:SRE'
 	  fi
+	  shared_flag_aix='$wl-bM:SRE'
+	  shared_flag_svr4='$wl-G'
 	fi
       fi
 
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
       # It seems that -bexpall does not export symbols beginning with
       # underscore (_), so it is better to generate a list of symbols to export.
       _LT_TAGVAR(always_export_symbols, $1)=yes
-      if test "$aix_use_runtimelinking" = yes; then
+      if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
 	# Warning - without using the other runtime loading flags (-brtl),
 	# -berok will link without error, but may produce a broken library.
 	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
         # Determine the default libpath from the value encoded in an
         # empty executable.
         _LT_SYS_MODULE_PATH_AIX([$1])
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
       else
-	if test "$host_cpu" = ia64; then
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	if test ia64 = "$host_cpu"; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
 	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
 	else
 	 # Determine the default libpath from the value encoded in an
 	 # empty executable.
 	 _LT_SYS_MODULE_PATH_AIX([$1])
-	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
 	  # -berok will link without error, but may produce a broken library.
-	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  if test "$with_gnu_ld" = yes; then
+	  _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+	  if test yes = "$with_gnu_ld"; then
 	    # We only use this code for GNU lds that support --whole-archive.
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
 	  else
 	    # Exported symbols can be pulled into shared objects from archives
 	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
 	  fi
 	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	  # -brtl affects multiple linker settings, -berok does not and is overridden later
+	  compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+	  if test svr4 != "$with_aix_soname"; then
+	    # This is similar to how AIX traditionally builds its shared libraries.
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	  fi
+	  if test aix != "$with_aix_soname"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	  else
+	    # used by -dlpreopen to get the symbols
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	  fi
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
 	fi
       fi
       ;;
@@ -5098,7 +5539,7 @@
       case $host_cpu in
       powerpc)
             # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
             _LT_TAGVAR(archive_expsym_cmds, $1)=''
         ;;
       m68k)
@@ -5128,16 +5569,17 @@
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
+	shrext_cmds=.dll
 	# FIXME: Setting linknames here is a bad hack.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	  else
-	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	  fi~
-	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	  linknames='
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+            cp "$export_symbols" "$output_objdir/$soname.def";
+            echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+          else
+            $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+          fi~
+          $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+          linknames='
 	# The linker will not automatically build a static lib if we build a DLL.
 	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
 	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
@@ -5146,18 +5588,18 @@
 	# Don't use ranlib
 	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
 	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
-	  lt_tool_outputfile="@TOOL_OUTPUT@"~
-	  case $lt_outputfile in
-	    *.exe|*.EXE) ;;
-	    *)
-	      lt_outputfile="$lt_outputfile.exe"
-	      lt_tool_outputfile="$lt_tool_outputfile.exe"
-	      ;;
-	  esac~
-	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	    $RM "$lt_outputfile.manifest";
-	  fi'
+          lt_tool_outputfile="@TOOL_OUTPUT@"~
+          case $lt_outputfile in
+            *.exe|*.EXE) ;;
+            *)
+              lt_outputfile=$lt_outputfile.exe
+              lt_tool_outputfile=$lt_tool_outputfile.exe
+              ;;
+          esac~
+          if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+            $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+            $RM "$lt_outputfile.manifest";
+          fi'
 	;;
       *)
 	# Assume MSVC wrapper
@@ -5166,7 +5608,7 @@
 	# Tell ltmain to make .lib files, not .a files.
 	libext=lib
 	# Tell ltmain to make .dll files, not .so files.
-	shrext_cmds=".dll"
+	shrext_cmds=.dll
 	# FIXME: Setting linknames here is a bad hack.
 	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
 	# The linker will automatically build a .lib file if we build a DLL.
@@ -5216,33 +5658,33 @@
       ;;
 
     hpux9*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
       else
-	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
       fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       _LT_TAGVAR(hardcode_direct, $1)=yes
 
       # hardcode_minus_L: Not really in the search PATH,
       # but as the default location of the library.
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
       ;;
 
     hpux10*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
-      if test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      if test no = "$with_gnu_ld"; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
 	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
 	_LT_TAGVAR(hardcode_direct, $1)=yes
 	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
 	# hardcode_minus_L: Not really in the search PATH,
 	# but as the default location of the library.
 	_LT_TAGVAR(hardcode_minus_L, $1)=yes
@@ -5250,25 +5692,25 @@
       ;;
 
     hpux11*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test yes,no = "$GCC,$with_gnu_ld"; then
 	case $host_cpu in
 	hppa*64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
 	case $host_cpu in
 	hppa*64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
 	m4_if($1, [], [
@@ -5276,14 +5718,14 @@
 	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
 	  _LT_LINKER_OPTION([if $CC understands -b],
 	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
-	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
 	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
-	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
 	  ;;
 	esac
       fi
-      if test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      if test no = "$with_gnu_ld"; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
 	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
 	case $host_cpu in
@@ -5294,7 +5736,7 @@
 	*)
 	  _LT_TAGVAR(hardcode_direct, $1)=yes
 	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
 
 	  # hardcode_minus_L: Not really in the search PATH,
 	  # but as the default location of the library.
@@ -5305,16 +5747,16 @@
       ;;
 
     irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
 	# This should be the same for all languages, so no per-tag cache variable.
 	AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
 	  [lt_cv_irix_exported_symbol],
-	  [save_LDFLAGS="$LDFLAGS"
-	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	  [save_LDFLAGS=$LDFLAGS
+	   LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
 	   AC_LINK_IFELSE(
 	     [AC_LANG_SOURCE(
 	        [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
@@ -5327,21 +5769,31 @@
       end]])])],
 	      [lt_cv_irix_exported_symbol=yes],
 	      [lt_cv_irix_exported_symbol=no])
-           LDFLAGS="$save_LDFLAGS"])
-	if test "$lt_cv_irix_exported_symbol" = yes; then
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+           LDFLAGS=$save_LDFLAGS])
+	if test yes = "$lt_cv_irix_exported_symbol"; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
 	fi
       else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       _LT_TAGVAR(inherit_rpath, $1)=yes
       _LT_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
+    linux*)
+      case $cc_basename in
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	_LT_TAGVAR(ld_shlibs, $1)=yes
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      esac
+      ;;
+
     netbsd*)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
@@ -5356,7 +5808,7 @@
     newsos6)
       _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
       _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
@@ -5364,27 +5816,19 @@
     *nto* | *qnx*)
       ;;
 
-    openbsd*)
+    openbsd* | bitrig*)
       if test -f /usr/libexec/ld.so; then
 	_LT_TAGVAR(hardcode_direct, $1)=yes
 	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
 	else
-	  case $host_os in
-	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	     ;;
-	   *)
-	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	     ;;
-	  esac
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
 	fi
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
@@ -5395,33 +5839,53 @@
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      shrext_cmds=.dll
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
       ;;
 
     osf3*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
       else
 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
       ;;
 
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
       else
 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+          $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -5432,24 +5896,24 @@
 
     solaris*)
       _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	wlarc='$wl'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+          $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
 	case `$CC -V 2>&1` in
 	*"Compilers 5.0"*)
 	  wlarc=''
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
 	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+            $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
 	  ;;
 	*)
-	  wlarc='${wl}'
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  wlarc='$wl'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
 	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+            $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
 	  ;;
 	esac
       fi
@@ -5459,11 +5923,11 @@
       solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
       *)
 	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but understands '-z linker_flag'.  GCC discards it without '$wl',
 	# but is careful enough not to reorder.
 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	if test yes = "$GCC"; then
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
 	else
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
 	fi
@@ -5473,10 +5937,10 @@
       ;;
 
     sunos4*)
-      if test "x$host_vendor" = xsequent; then
+      if test sequent = "$host_vendor"; then
 	# Use $CC to link under sequent, because it throws in some extra .o
 	# files that make .init and .fini sections work.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
       else
 	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
       fi
@@ -5525,43 +5989,43 @@
       ;;
 
     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
       _LT_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
     sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
+      # Note: We CANNOT use -z defs as we might desire, because we do not
       # link with -lc, and that would cause any symbols used from libc to
       # always be unresolved, which means just about no library would
       # ever link correctly.  If we're not using GNU ld we use -z text
       # though, which does catch some bad symbols but isn't as heavy-handed
       # as -z defs.
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+      _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
       _LT_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
       _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
       _LT_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
       runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
       fi
       ;;
 
@@ -5576,17 +6040,17 @@
       ;;
     esac
 
-    if test x$host_vendor = xsni; then
+    if test sni = "$host_vendor"; then
       case $host in
       sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
 	;;
       esac
     fi
   fi
 ])
 AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
 
 _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
 
@@ -5603,7 +6067,7 @@
   # Assume -lc should be added
   _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
+  if test yes,yes = "$GCC,$enable_shared"; then
     case $_LT_TAGVAR(archive_cmds, $1) in
     *'~'*)
       # FIXME: we may have to deal with multi-command sequences.
@@ -5683,12 +6147,12 @@
 _LT_TAGDECL([], [hardcode_libdir_separator], [1],
     [Whether we need a single "-rpath" flag with a separated argument])
 _LT_TAGDECL([], [hardcode_direct], [0],
-    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
     DIR into the resulting binary])
 _LT_TAGDECL([], [hardcode_direct_absolute], [0],
-    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
     DIR into the resulting binary and the resulting library dependency is
-    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+    "absolute", i.e impossible to change by setting $shlibpath_var if the
     library is relocated])
 _LT_TAGDECL([], [hardcode_minus_L], [0],
     [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
@@ -5729,10 +6193,10 @@
 # ------------------------
 # Ensure that the configuration variables for a C compiler are suitably
 # defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
 m4_defun([_LT_LANG_C_CONFIG],
 [m4_require([_LT_DECL_EGREP])dnl
-lt_save_CC="$CC"
+lt_save_CC=$CC
 AC_LANG_PUSH(C)
 
 # Source file extension for C test sources.
@@ -5772,18 +6236,18 @@
   LT_SYS_DLOPEN_SELF
   _LT_CMD_STRIPLIB
 
-  # Report which library types will actually be built
+  # Report what library types will actually be built
   AC_MSG_CHECKING([if libtool supports shared libraries])
   AC_MSG_RESULT([$can_build_shared])
 
   AC_MSG_CHECKING([whether to build shared libraries])
-  test "$can_build_shared" = "no" && enable_shared=no
+  test no = "$can_build_shared" && enable_shared=no
 
   # On AIX, shared libraries and static libraries use the same namespace, and
   # are all built from PIC.
   case $host_os in
   aix3*)
-    test "$enable_shared" = yes && enable_static=no
+    test yes = "$enable_shared" && enable_static=no
     if test -n "$RANLIB"; then
       archive_cmds="$archive_cmds~\$RANLIB \$lib"
       postinstall_cmds='$RANLIB $lib'
@@ -5791,8 +6255,12 @@
     ;;
 
   aix[[4-9]]*)
-    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-      test "$enable_shared" = yes && enable_static=no
+    if test ia64 != "$host_cpu"; then
+      case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+      yes,aix,yes) ;;			# shared object as lib.so file only
+      yes,svr4,*) ;;			# shared object as lib.so archive member only
+      yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+      esac
     fi
     ;;
   esac
@@ -5800,13 +6268,13 @@
 
   AC_MSG_CHECKING([whether to build static libraries])
   # Make sure either enable_shared or enable_static is yes.
-  test "$enable_shared" = yes || enable_static=yes
+  test yes = "$enable_shared" || enable_static=yes
   AC_MSG_RESULT([$enable_static])
 
   _LT_CONFIG($1)
 fi
 AC_LANG_POP
-CC="$lt_save_CC"
+CC=$lt_save_CC
 ])# _LT_LANG_C_CONFIG
 
 
@@ -5814,14 +6282,14 @@
 # --------------------------
 # Ensure that the configuration variables for a C++ compiler are suitably
 # defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
 m4_defun([_LT_LANG_CXX_CONFIG],
 [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_DECL_EGREP])dnl
 m4_require([_LT_PATH_MANIFEST_TOOL])dnl
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
+if test -n "$CXX" && ( test no != "$CXX" &&
+    ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+    (test g++ != "$CXX"))); then
   AC_PROG_CXXCPP
 else
   _lt_caught_CXX_error=yes
@@ -5863,7 +6331,7 @@
 # the CXX compiler isn't working.  Some variables (like enable_shared)
 # are currently assumed to apply to all compilers on this platform,
 # and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
+if test yes != "$_lt_caught_CXX_error"; then
   # Code to be used in simple compile tests
   lt_simple_compile_test_code="int some_variable = 0;"
 
@@ -5905,35 +6373,35 @@
   if test -n "$compiler"; then
     # We don't want -fno-exception when compiling C++ code, so set the
     # no_builtin_flag separately
-    if test "$GXX" = yes; then
+    if test yes = "$GXX"; then
       _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
     else
       _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
     fi
 
-    if test "$GXX" = yes; then
+    if test yes = "$GXX"; then
       # Set up default GNU C++ configuration
 
       LT_PATH_LD
 
       # Check if GNU C++ uses GNU ld as the underlying linker, since the
       # archiving commands below assume that GNU ld is being used.
-      if test "$with_gnu_ld" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      if test yes = "$with_gnu_ld"; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
 
         # If archive_cmds runs LD, not CC, wlarc should be empty
         # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
         #     investigate it a little bit more. (MM)
-        wlarc='${wl}'
+        wlarc='$wl'
 
         # ancient GNU ld didn't support --whole-archive et. al.
         if eval "`$CC -print-prog-name=ld` --help 2>&1" |
 	  $GREP 'no-whole-archive' > /dev/null; then
-          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+          _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
         else
           _LT_TAGVAR(whole_archive_flag_spec, $1)=
         fi
@@ -5969,18 +6437,30 @@
         _LT_TAGVAR(ld_shlibs, $1)=no
         ;;
       aix[[4-9]]*)
-        if test "$host_cpu" = ia64; then
+        if test ia64 = "$host_cpu"; then
           # On IA64, the linker does run time linking by default, so we don't
           # have to do anything special.
           aix_use_runtimelinking=no
           exp_sym_flag='-Bexport'
-          no_entry_flag=""
+          no_entry_flag=
         else
           aix_use_runtimelinking=no
 
           # Test if we are trying to use run time linking or normal
           # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-          # need to do runtime linking.
+          # have runtime linking enabled, and use it for executables.
+          # For shared libraries, we enable/disable runtime linking
+          # depending on the kind of the shared library created -
+          # when "with_aix_soname,aix_use_runtimelinking" is:
+          # "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "aix,yes"  lib.so          shared, rtl:yes, for executables
+          #            lib.a           static archive
+          # "both,no"  lib.so.V(shr.o) shared, rtl:yes
+          #            lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a(lib.so.V) shared, rtl:no
+          # "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a           static archive
           case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
 	    for ld_flag in $LDFLAGS; do
 	      case $ld_flag in
@@ -5990,6 +6470,13 @@
 	        ;;
 	      esac
 	    done
+	    if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	      # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	      # so we don't have lib.a shared libs to link our executables.
+	      # We have to force runtime linking in this case.
+	      aix_use_runtimelinking=yes
+	      LDFLAGS="$LDFLAGS -Wl,-brtl"
+	    fi
 	    ;;
           esac
 
@@ -6008,13 +6495,21 @@
         _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
         _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
         _LT_TAGVAR(link_all_deplibs, $1)=yes
-        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+        _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+        case $with_aix_soname,$aix_use_runtimelinking in
+        aix,*) ;;	# no import file
+        svr4,* | *,yes) # use import file
+          # The Import File defines what to hardcode.
+          _LT_TAGVAR(hardcode_direct, $1)=no
+          _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+          ;;
+        esac
 
-        if test "$GXX" = yes; then
+        if test yes = "$GXX"; then
           case $host_os in aix4.[[012]]|aix4.[[012]].*)
           # We only want to do this on AIX 4.2 and lower, the check
           # below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
+	  collect2name=`$CC -print-prog-name=collect2`
 	  if test -f "$collect2name" &&
 	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 	  then
@@ -6032,64 +6527,84 @@
 	  fi
           esac
           shared_flag='-shared'
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag="$shared_flag "'${wl}-G'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag=$shared_flag' $wl-G'
 	  fi
+	  # Need to ensure runtime linking is disabled for the traditional
+	  # shared library, or the linker may eventually find shared libraries
+	  # /with/ Import File - we do not want to mix them.
+	  shared_flag_aix='-shared'
+	  shared_flag_svr4='-shared $wl-G'
         else
           # not using gcc
-          if test "$host_cpu" = ia64; then
+          if test ia64 = "$host_cpu"; then
 	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 	  # chokes on -Wl,-G. The following line is correct:
 	  shared_flag='-G'
           else
-	    if test "$aix_use_runtimelinking" = yes; then
-	      shared_flag='${wl}-G'
+	    if test yes = "$aix_use_runtimelinking"; then
+	      shared_flag='$wl-G'
 	    else
-	      shared_flag='${wl}-bM:SRE'
+	      shared_flag='$wl-bM:SRE'
 	    fi
+	    shared_flag_aix='$wl-bM:SRE'
+	    shared_flag_svr4='$wl-G'
           fi
         fi
 
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
         # It seems that -bexpall does not export symbols beginning with
         # underscore (_), so it is better to generate a list of symbols to
 	# export.
         _LT_TAGVAR(always_export_symbols, $1)=yes
-        if test "$aix_use_runtimelinking" = yes; then
+	if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
           # Warning - without using the other runtime loading flags (-brtl),
           # -berok will link without error, but may produce a broken library.
-          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+          # The "-G" linker flag allows undefined symbols.
+          _LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
           # Determine the default libpath from the value encoded in an empty
           # executable.
           _LT_SYS_MODULE_PATH_AIX([$1])
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
 
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
         else
-          if test "$host_cpu" = ia64; then
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+          if test ia64 = "$host_cpu"; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
 	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
           else
 	    # Determine the default libpath from the value encoded in an
 	    # empty executable.
 	    _LT_SYS_MODULE_PATH_AIX([$1])
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
 	    # Warning - without using the other run time loading flags,
 	    # -berok will link without error, but may produce a broken library.
-	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	    if test "$with_gnu_ld" = yes; then
+	    _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+	    _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+	    if test yes = "$with_gnu_ld"; then
 	      # We only use this code for GNU lds that support --whole-archive.
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
 	    else
 	      # Exported symbols can be pulled into shared objects from archives
 	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
 	    fi
 	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	    # This is similar to how AIX traditionally builds its shared
-	    # libraries.
-	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	    # -brtl affects multiple linker settings, -berok does not and is overridden later
+	    compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+	    if test svr4 != "$with_aix_soname"; then
+	      # This is similar to how AIX traditionally builds its shared
+	      # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+	      _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	    fi
+	    if test aix != "$with_aix_soname"; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	    else
+	      # used by -dlpreopen to get the symbols
+	      _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	    fi
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
           fi
         fi
         ;;
@@ -6099,7 +6614,7 @@
 	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 	  # support --undefined.  This deserves some investigation.  FIXME
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
 	else
 	  _LT_TAGVAR(ld_shlibs, $1)=no
 	fi
@@ -6127,57 +6642,58 @@
 	  # Tell ltmain to make .lib files, not .a files.
 	  libext=lib
 	  # Tell ltmain to make .dll files, not .so files.
-	  shrext_cmds=".dll"
+	  shrext_cmds=.dll
 	  # FIXME: Setting linknames here is a bad hack.
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
-	    else
-	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
-	    fi~
-	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
-	    linknames='
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+              cp "$export_symbols" "$output_objdir/$soname.def";
+              echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+            else
+              $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+            fi~
+            $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+            linknames='
 	  # The linker will not automatically build a static lib if we build a DLL.
 	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
 	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
 	  # Don't use ranlib
 	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
 	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
-	    lt_tool_outputfile="@TOOL_OUTPUT@"~
-	    case $lt_outputfile in
-	      *.exe|*.EXE) ;;
-	      *)
-		lt_outputfile="$lt_outputfile.exe"
-		lt_tool_outputfile="$lt_tool_outputfile.exe"
-		;;
-	    esac~
-	    func_to_tool_file "$lt_outputfile"~
-	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
-	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
-	      $RM "$lt_outputfile.manifest";
-	    fi'
+            lt_tool_outputfile="@TOOL_OUTPUT@"~
+            case $lt_outputfile in
+              *.exe|*.EXE) ;;
+              *)
+                lt_outputfile=$lt_outputfile.exe
+                lt_tool_outputfile=$lt_tool_outputfile.exe
+                ;;
+            esac~
+            func_to_tool_file "$lt_outputfile"~
+            if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+              $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+              $RM "$lt_outputfile.manifest";
+            fi'
 	  ;;
 	*)
 	  # g++
 	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
 	  # as there is no search path for DLLs.
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
 	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
 	  _LT_TAGVAR(always_export_symbols, $1)=no
 	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
 
 	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	    # If the export-symbols file already is a .def file (1st line
-	    # is EXPORTS), use it as is; otherwise, prepend...
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	      cp $export_symbols $output_objdir/$soname.def;
-	    else
-	      echo EXPORTS > $output_objdir/$soname.def;
-	      cat $export_symbols >> $output_objdir/$soname.def;
-	    fi~
-	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file, use it as
+	    # is; otherwise, prepend EXPORTS...
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+              cp $export_symbols $output_objdir/$soname.def;
+            else
+              echo EXPORTS > $output_objdir/$soname.def;
+              cat $export_symbols >> $output_objdir/$soname.def;
+            fi~
+            $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 	  else
 	    _LT_TAGVAR(ld_shlibs, $1)=no
 	  fi
@@ -6188,6 +6704,34 @@
         _LT_DARWIN_LINKER_FEATURES($1)
 	;;
 
+      os2*)
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	shrext_cmds=.dll
+	_LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  prefix_cmds="$SED"~
+	  if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	    prefix_cmds="$prefix_cmds -e 1d";
+	  fi~
+	  prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	  cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	_LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	;;
+
       dgux*)
         case $cc_basename in
           ec++*)
@@ -6222,18 +6766,15 @@
         _LT_TAGVAR(ld_shlibs, $1)=yes
         ;;
 
-      gnu*)
-        ;;
-
       haiku*)
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
         _LT_TAGVAR(link_all_deplibs, $1)=yes
         ;;
 
       hpux9*)
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
         _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
         _LT_TAGVAR(hardcode_direct, $1)=yes
         _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
 				             # but as the default
@@ -6245,7 +6786,7 @@
             _LT_TAGVAR(ld_shlibs, $1)=no
             ;;
           aCC*)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
             # Commands to make compiler produce verbose output that lists
             # what "hidden" libraries, object files and flags are used when
             # linking a shared library.
@@ -6254,11 +6795,11 @@
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
             ;;
           *)
-            if test "$GXX" = yes; then
-              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            if test yes = "$GXX"; then
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
             else
               # FIXME: insert proper C++ library support
               _LT_TAGVAR(ld_shlibs, $1)=no
@@ -6268,15 +6809,15 @@
         ;;
 
       hpux10*|hpux11*)
-        if test $with_gnu_ld = no; then
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+        if test no = "$with_gnu_ld"; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
 	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
           case $host_cpu in
             hppa*64*|ia64*)
               ;;
             *)
-	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
               ;;
           esac
         fi
@@ -6302,13 +6843,13 @@
           aCC*)
 	    case $host_cpu in
 	      hppa*64*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	      ia64*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	      *)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	        ;;
 	    esac
 	    # Commands to make compiler produce verbose output that lists
@@ -6319,20 +6860,20 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
           *)
-	    if test "$GXX" = yes; then
-	      if test $with_gnu_ld = no; then
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
 	        case $host_cpu in
 	          hppa*64*)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          ia64*)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          *)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	        esac
 	      fi
@@ -6347,22 +6888,22 @@
       interix[[3-9]]*)
 	_LT_TAGVAR(hardcode_direct, $1)=no
 	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
 	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
 	# Instead, shared libraries are loaded at an image base (0x10000000 by
 	# default) and relocated if they conflict, which is a slow very memory
 	# consuming and fragmenting process.  To avoid this, we pick a random,
 	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
 	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
 	;;
       irix5* | irix6*)
         case $cc_basename in
           CC*)
 	    # SGI C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
@@ -6371,22 +6912,22 @@
 	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
 	    ;;
           *)
-	    if test "$GXX" = yes; then
-	      if test "$with_gnu_ld" = no; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 	      else
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
 	      fi
 	    fi
 	    _LT_TAGVAR(link_all_deplibs, $1)=yes
 	    ;;
         esac
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
         _LT_TAGVAR(hardcode_libdir_separator, $1)=:
         _LT_TAGVAR(inherit_rpath, $1)=yes
         ;;
 
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
         case $cc_basename in
           KCC*)
 	    # Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -6394,8 +6935,8 @@
 	    # KCC will only create a shared library if the output file
 	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
 	    # to its proper name (with version) after linking.
-	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
 	    # Commands to make compiler produce verbose output that lists
 	    # what "hidden" libraries, object files and flags are used when
 	    # linking a shared library.
@@ -6404,10 +6945,10 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
@@ -6421,59 +6962,59 @@
 	    # earlier do not add the objects themselves.
 	    case `$CC -V 2>&1` in
 	      *"Version 7."*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 		;;
 	      *)  # Version 8.0 or newer
 	        tmp_idyn=
 	        case $host_cpu in
 		  ia64*) tmp_idyn=' -i_dynamic';;
 		esac
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 		;;
 	    esac
 	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
 	    ;;
           pgCC* | pgcpp*)
             # Portland Group C++ compiler
 	    case `$CC -V` in
 	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
 	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+               rm -rf $tpldir~
+               $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+               compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
 	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
-		$RANLIB $oldlib'
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+                $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+                $RANLIB $oldlib'
 	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	      ;;
 	    *) # Version 6 and above use weak symbols
-	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
 	      ;;
 	    esac
 
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
             ;;
 	  cxx*)
 	    # Compaq C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname  -o $lib $wl-retain-symbols-file $wl$export_symbols'
 
 	    runpath_var=LD_RUN_PATH
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -6487,18 +7028,18 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
 	    ;;
 	  xl* | mpixl* | bgxl*)
 	    # IBM XL 8.0 on PPC, with GNU ld
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    if test "x$supports_anon_versioning" = xyes; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    if test yes = "$supports_anon_versioning"; then
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-		echo "local: *; };" >> $output_objdir/$libname.ver~
-		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+                cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+                echo "local: *; };" >> $output_objdir/$libname.ver~
+                $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
 	    fi
 	    ;;
 	  *)
@@ -6506,10 +7047,10 @@
 	    *Sun\ C*)
 	      # Sun C++ 5.9
 	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	      _LT_TAGVAR(compiler_needs_object, $1)=yes
 
 	      # Not sure whether something based on
@@ -6567,22 +7108,17 @@
         _LT_TAGVAR(ld_shlibs, $1)=yes
 	;;
 
-      openbsd2*)
-        # C++ shared libraries are fairly broken
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	;;
-
-      openbsd*)
+      openbsd* | bitrig*)
 	if test -f /usr/libexec/ld.so; then
 	  _LT_TAGVAR(hardcode_direct, $1)=yes
 	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
 	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
 	  fi
 	  output_verbose_link_cmd=func_echo_all
 	else
@@ -6598,9 +7134,9 @@
 	    # KCC will only create a shared library if the output file
 	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
 	    # to its proper name (with version) after linking.
-	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
 
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
 	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
 	    # Archives containing C++ object files must be created using
@@ -6618,17 +7154,17 @@
           cxx*)
 	    case $host in
 	      osf3*)
-	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
 		;;
 	      *)
 	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	          echo "-hidden">> $lib.exp~
-	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
-	          $RM $lib.exp'
+                  echo "-hidden">> $lib.exp~
+                  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+                  $RM $lib.exp'
 	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
 		;;
 	    esac
@@ -6643,21 +7179,21 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
 	  *)
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
 	      case $host in
 	        osf3*)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 		  ;;
 	        *)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
 		  ;;
 	      esac
 
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
 	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
 	      # Commands to make compiler produce verbose output that lists
@@ -6703,9 +7239,9 @@
 	    # Sun C++ 4.2, 5.x and Centerline C++
             _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
 	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+              $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
 	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -6713,7 +7249,7 @@
 	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
 	      *)
 		# The compiler driver will combine and reorder linker options,
-		# but understands `-z linker_flag'.
+		# but understands '-z linker_flag'.
 	        # Supported since Solaris 2.6 (maybe 2.5.1?)
 		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
 	        ;;
@@ -6730,30 +7266,30 @@
 	    ;;
           gcx*)
 	    # Green Hills C++ Compiler
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
 
 	    # The C++ compiler must be used to create the archive.
 	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
 	    ;;
           *)
 	    # GNU C++ compiler with Solaris linker
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
 	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
 	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+                  $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
 	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      else
-	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # g++ 2.7 appears to require '-G' NOT '-shared' on this
 	        # platform.
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
 	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+                  $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
@@ -6761,11 +7297,11 @@
 	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      fi
 
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
 	      case $host_os in
 		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
 		*)
-		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
 		  ;;
 	      esac
 	    fi
@@ -6774,52 +7310,52 @@
         ;;
 
     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
       _LT_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       runpath_var='LD_RUN_PATH'
 
       case $cc_basename in
         CC*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
       esac
       ;;
 
       sysv5* | sco3.2v5* | sco5v6*)
-	# Note: We can NOT use -z defs as we might desire, because we do not
+	# Note: We CANNOT use -z defs as we might desire, because we do not
 	# link with -lc, and that would cause any symbols used from libc to
 	# always be unresolved, which means just about no library would
 	# ever link correctly.  If we're not using GNU ld we use -z text
 	# though, which does catch some bad symbols but isn't as heavy-handed
 	# as -z defs.
-	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+	_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+	_LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
 	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
 	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
 	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
 	_LT_TAGVAR(link_all_deplibs, $1)=yes
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
 	runpath_var='LD_RUN_PATH'
 
 	case $cc_basename in
           CC*)
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
-	      '"$_LT_TAGVAR(old_archive_cmds, $1)"
+              '"$_LT_TAGVAR(old_archive_cmds, $1)"
 	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
-	      '"$_LT_TAGVAR(reload_cmds, $1)"
+              '"$_LT_TAGVAR(reload_cmds, $1)"
 	    ;;
 	  *)
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    ;;
 	esac
       ;;
@@ -6850,10 +7386,10 @@
     esac
 
     AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+    test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
 
-    _LT_TAGVAR(GCC, $1)="$GXX"
-    _LT_TAGVAR(LD, $1)="$LD"
+    _LT_TAGVAR(GCC, $1)=$GXX
+    _LT_TAGVAR(LD, $1)=$LD
 
     ## CAVEAT EMPTOR:
     ## There is no encapsulation within the following macros, do not change
@@ -6880,7 +7416,7 @@
   lt_cv_path_LD=$lt_save_path_LD
   lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
   lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
+fi # test yes != "$_lt_caught_CXX_error"
 
 AC_LANG_POP
 ])# _LT_LANG_CXX_CONFIG
@@ -6902,13 +7438,14 @@
 AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
 func_stripname_cnf ()
 {
-  case ${2} in
-  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+  case @S|@2 in
+  .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
+  *)  func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
   esac
 } # func_stripname_cnf
 ])# _LT_FUNC_STRIPNAME_CNF
 
+
 # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
 # ---------------------------------
 # Figure out "hidden" library dependencies from verbose
@@ -6992,13 +7529,13 @@
   pre_test_object_deps_done=no
 
   for p in `eval "$output_verbose_link_cmd"`; do
-    case ${prev}${p} in
+    case $prev$p in
 
     -L* | -R* | -l*)
        # Some compilers place space between "-{L,R}" and the path.
        # Remove the space.
-       if test $p = "-L" ||
-          test $p = "-R"; then
+       if test x-L = "$p" ||
+          test x-R = "$p"; then
 	 prev=$p
 	 continue
        fi
@@ -7014,16 +7551,16 @@
        case $p in
        =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
        esac
-       if test "$pre_test_object_deps_done" = no; then
-	 case ${prev} in
+       if test no = "$pre_test_object_deps_done"; then
+	 case $prev in
 	 -L | -R)
 	   # Internal compiler library paths should come after those
 	   # provided the user.  The postdeps already come after the
 	   # user supplied libs so there is no need to process them.
 	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
-	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	     _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
 	   else
-	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
 	   fi
 	   ;;
 	 # The "-l" case would never come before the object being
@@ -7031,9 +7568,9 @@
 	 esac
        else
 	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
-	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+	   _LT_TAGVAR(postdeps, $1)=$prev$p
 	 else
-	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
 	 fi
        fi
        prev=
@@ -7048,15 +7585,15 @@
 	 continue
        fi
 
-       if test "$pre_test_object_deps_done" = no; then
+       if test no = "$pre_test_object_deps_done"; then
 	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
-	   _LT_TAGVAR(predep_objects, $1)="$p"
+	   _LT_TAGVAR(predep_objects, $1)=$p
 	 else
 	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
 	 fi
        else
 	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
-	   _LT_TAGVAR(postdep_objects, $1)="$p"
+	   _LT_TAGVAR(postdep_objects, $1)=$p
 	 else
 	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
 	 fi
@@ -7087,51 +7624,6 @@
   _LT_TAGVAR(postdep_objects,$1)=
   _LT_TAGVAR(postdeps,$1)=
   ;;
-
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC* | sunCC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
 esac
 ])
 
@@ -7140,7 +7632,7 @@
 esac
  _LT_TAGVAR(compiler_lib_search_dirs, $1)=
 if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
 fi
 _LT_TAGDECL([], [compiler_lib_search_dirs], [1],
     [The directories searched by this compiler when creating a shared library])
@@ -7160,10 +7652,10 @@
 # --------------------------
 # Ensure that the configuration variables for a Fortran 77 compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
 m4_defun([_LT_LANG_F77_CONFIG],
 [AC_LANG_PUSH(Fortran 77)
-if test -z "$F77" || test "X$F77" = "Xno"; then
+if test -z "$F77" || test no = "$F77"; then
   _lt_disable_F77=yes
 fi
 
@@ -7200,7 +7692,7 @@
 # the F77 compiler isn't working.  Some variables (like enable_shared)
 # are currently assumed to apply to all compilers on this platform,
 # and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
+if test yes != "$_lt_disable_F77"; then
   # Code to be used in simple compile tests
   lt_simple_compile_test_code="\
       subroutine t
@@ -7222,7 +7714,7 @@
   _LT_LINKER_BOILERPLATE
 
   # Allow CC to be a program name with arguments.
-  lt_save_CC="$CC"
+  lt_save_CC=$CC
   lt_save_GCC=$GCC
   lt_save_CFLAGS=$CFLAGS
   CC=${F77-"f77"}
@@ -7236,21 +7728,25 @@
     AC_MSG_RESULT([$can_build_shared])
 
     AC_MSG_CHECKING([whether to build shared libraries])
-    test "$can_build_shared" = "no" && enable_shared=no
+    test no = "$can_build_shared" && enable_shared=no
 
     # On AIX, shared libraries and static libraries use the same namespace, and
     # are all built from PIC.
     case $host_os in
       aix3*)
-        test "$enable_shared" = yes && enable_static=no
+        test yes = "$enable_shared" && enable_static=no
         if test -n "$RANLIB"; then
           archive_cmds="$archive_cmds~\$RANLIB \$lib"
           postinstall_cmds='$RANLIB $lib'
         fi
         ;;
       aix[[4-9]]*)
-	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-	  test "$enable_shared" = yes && enable_static=no
+	if test ia64 != "$host_cpu"; then
+	  case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+	  yes,aix,yes) ;;		# shared object as lib.so file only
+	  yes,svr4,*) ;;		# shared object as lib.so archive member only
+	  yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+	  esac
 	fi
         ;;
     esac
@@ -7258,11 +7754,11 @@
 
     AC_MSG_CHECKING([whether to build static libraries])
     # Make sure either enable_shared or enable_static is yes.
-    test "$enable_shared" = yes || enable_static=yes
+    test yes = "$enable_shared" || enable_static=yes
     AC_MSG_RESULT([$enable_static])
 
-    _LT_TAGVAR(GCC, $1)="$G77"
-    _LT_TAGVAR(LD, $1)="$LD"
+    _LT_TAGVAR(GCC, $1)=$G77
+    _LT_TAGVAR(LD, $1)=$LD
 
     ## CAVEAT EMPTOR:
     ## There is no encapsulation within the following macros, do not change
@@ -7279,9 +7775,9 @@
   fi # test -n "$compiler"
 
   GCC=$lt_save_GCC
-  CC="$lt_save_CC"
-  CFLAGS="$lt_save_CFLAGS"
-fi # test "$_lt_disable_F77" != yes
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_F77"
 
 AC_LANG_POP
 ])# _LT_LANG_F77_CONFIG
@@ -7291,11 +7787,11 @@
 # -------------------------
 # Ensure that the configuration variables for a Fortran compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
 m4_defun([_LT_LANG_FC_CONFIG],
 [AC_LANG_PUSH(Fortran)
 
-if test -z "$FC" || test "X$FC" = "Xno"; then
+if test -z "$FC" || test no = "$FC"; then
   _lt_disable_FC=yes
 fi
 
@@ -7332,7 +7828,7 @@
 # the FC compiler isn't working.  Some variables (like enable_shared)
 # are currently assumed to apply to all compilers on this platform,
 # and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
+if test yes != "$_lt_disable_FC"; then
   # Code to be used in simple compile tests
   lt_simple_compile_test_code="\
       subroutine t
@@ -7354,7 +7850,7 @@
   _LT_LINKER_BOILERPLATE
 
   # Allow CC to be a program name with arguments.
-  lt_save_CC="$CC"
+  lt_save_CC=$CC
   lt_save_GCC=$GCC
   lt_save_CFLAGS=$CFLAGS
   CC=${FC-"f95"}
@@ -7370,21 +7866,25 @@
     AC_MSG_RESULT([$can_build_shared])
 
     AC_MSG_CHECKING([whether to build shared libraries])
-    test "$can_build_shared" = "no" && enable_shared=no
+    test no = "$can_build_shared" && enable_shared=no
 
     # On AIX, shared libraries and static libraries use the same namespace, and
     # are all built from PIC.
     case $host_os in
       aix3*)
-        test "$enable_shared" = yes && enable_static=no
+        test yes = "$enable_shared" && enable_static=no
         if test -n "$RANLIB"; then
           archive_cmds="$archive_cmds~\$RANLIB \$lib"
           postinstall_cmds='$RANLIB $lib'
         fi
         ;;
       aix[[4-9]]*)
-	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-	  test "$enable_shared" = yes && enable_static=no
+	if test ia64 != "$host_cpu"; then
+	  case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+	  yes,aix,yes) ;;		# shared object as lib.so file only
+	  yes,svr4,*) ;;		# shared object as lib.so archive member only
+	  yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+	  esac
 	fi
         ;;
     esac
@@ -7392,11 +7892,11 @@
 
     AC_MSG_CHECKING([whether to build static libraries])
     # Make sure either enable_shared or enable_static is yes.
-    test "$enable_shared" = yes || enable_static=yes
+    test yes = "$enable_shared" || enable_static=yes
     AC_MSG_RESULT([$enable_static])
 
-    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
-    _LT_TAGVAR(LD, $1)="$LD"
+    _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
+    _LT_TAGVAR(LD, $1)=$LD
 
     ## CAVEAT EMPTOR:
     ## There is no encapsulation within the following macros, do not change
@@ -7416,7 +7916,7 @@
   GCC=$lt_save_GCC
   CC=$lt_save_CC
   CFLAGS=$lt_save_CFLAGS
-fi # test "$_lt_disable_FC" != yes
+fi # test yes != "$_lt_disable_FC"
 
 AC_LANG_POP
 ])# _LT_LANG_FC_CONFIG
@@ -7426,7 +7926,7 @@
 # --------------------------
 # Ensure that the configuration variables for the GNU Java Compiler compiler
 # are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
 m4_defun([_LT_LANG_GCJ_CONFIG],
 [AC_REQUIRE([LT_PROG_GCJ])dnl
 AC_LANG_SAVE
@@ -7460,7 +7960,7 @@
 CFLAGS=$GCJFLAGS
 compiler=$CC
 _LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
+_LT_TAGVAR(LD, $1)=$LD
 _LT_CC_BASENAME([$compiler])
 
 # GCJ did not exist at the time GCC didn't implicitly link libc in.
@@ -7497,7 +7997,7 @@
 # --------------------------
 # Ensure that the configuration variables for the GNU Go compiler
 # are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
 m4_defun([_LT_LANG_GO_CONFIG],
 [AC_REQUIRE([LT_PROG_GO])dnl
 AC_LANG_SAVE
@@ -7531,7 +8031,7 @@
 CFLAGS=$GOFLAGS
 compiler=$CC
 _LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
+_LT_TAGVAR(LD, $1)=$LD
 _LT_CC_BASENAME([$compiler])
 
 # Go did not exist at the time GCC didn't implicitly link libc in.
@@ -7568,7 +8068,7 @@
 # -------------------------
 # Ensure that the configuration variables for the Windows resource compiler
 # are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
 m4_defun([_LT_LANG_RC_CONFIG],
 [AC_REQUIRE([LT_PROG_RC])dnl
 AC_LANG_SAVE
@@ -7584,7 +8084,7 @@
 lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
 
 # Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
+lt_simple_link_test_code=$lt_simple_compile_test_code
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 _LT_TAG_COMPILER
@@ -7594,7 +8094,7 @@
 _LT_LINKER_BOILERPLATE
 
 # Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
+lt_save_CC=$CC
 lt_save_CFLAGS=$CFLAGS
 lt_save_GCC=$GCC
 GCC=
@@ -7623,7 +8123,7 @@
 [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
   [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
     [AC_CHECK_TOOL(GCJ, gcj,)
-      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+      test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
       AC_SUBST(GCJFLAGS)])])[]dnl
 ])
 
@@ -7734,7 +8234,7 @@
 # Add /usr/xpg4/bin/sed as it is typically found on Solaris
 # along with /bin/sed that truncates output.
 for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
+  test ! -f "$lt_ac_sed" && continue
   cat /dev/null > conftest.in
   lt_ac_count=0
   echo $ECHO_N "0123456789$ECHO_C" >conftest.in
@@ -7751,9 +8251,9 @@
     $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
     cmp -s conftest.out conftest.nl || break
     # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
+    test 10 -lt "$lt_ac_count" && break
     lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
+    if test "$lt_ac_count" -gt "$lt_ac_max"; then
       lt_ac_max=$lt_ac_count
       lt_cv_path_SED=$lt_ac_sed
     fi
@@ -7777,27 +8277,7 @@
 # Find out whether the shell is Bourne or XSI compatible,
 # or has some other useful features.
 m4_defun([_LT_CHECK_SHELL_FEATURES],
-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,b/c, \
-    && eval 'test $(( 1 + 1 )) -eq 2 \
-    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-  && xsi_shell=yes
-AC_MSG_RESULT([$xsi_shell])
-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
-
-AC_MSG_CHECKING([whether the shell understands "+="])
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
-    >/dev/null 2>&1 \
-  && lt_shell_append=yes
-AC_MSG_RESULT([$lt_shell_append])
-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
   lt_unset=unset
 else
   lt_unset=false
@@ -7821,102 +8301,9 @@
 ])# _LT_CHECK_SHELL_FEATURES
 
 
-# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
-# ------------------------------------------------------
-# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
-# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
-m4_defun([_LT_PROG_FUNCTION_REPLACE],
-[dnl {
-sed -e '/^$1 ()$/,/^} # $1 /c\
-$1 ()\
-{\
-m4_bpatsubsts([$2], [$], [\\], [^\([	 ]\)], [\\\1])
-} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
-  && mv -f "$cfgfile.tmp" "$cfgfile" \
-    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-])
-
-
-# _LT_PROG_REPLACE_SHELLFNS
-# -------------------------
-# Replace existing portable implementations of several shell functions with
-# equivalent extended shell implementations where those features are available..
-m4_defun([_LT_PROG_REPLACE_SHELLFNS],
-[if test x"$xsi_shell" = xyes; then
-  _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
-    case ${1} in
-      */*) func_dirname_result="${1%/*}${2}" ;;
-      *  ) func_dirname_result="${3}" ;;
-    esac])
-
-  _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
-    func_basename_result="${1##*/}"])
-
-  _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
-    case ${1} in
-      */*) func_dirname_result="${1%/*}${2}" ;;
-      *  ) func_dirname_result="${3}" ;;
-    esac
-    func_basename_result="${1##*/}"])
-
-  _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
-    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-    # positional parameters, so assign one to ordinary parameter first.
-    func_stripname_result=${3}
-    func_stripname_result=${func_stripname_result#"${1}"}
-    func_stripname_result=${func_stripname_result%"${2}"}])
-
-  _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
-    func_split_long_opt_name=${1%%=*}
-    func_split_long_opt_arg=${1#*=}])
-
-  _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
-    func_split_short_opt_arg=${1#??}
-    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
-
-  _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
-    case ${1} in
-      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-      *)    func_lo2o_result=${1} ;;
-    esac])
-
-  _LT_PROG_FUNCTION_REPLACE([func_xform], [    func_xform_result=${1%.*}.lo])
-
-  _LT_PROG_FUNCTION_REPLACE([func_arith], [    func_arith_result=$(( $[*] ))])
-
-  _LT_PROG_FUNCTION_REPLACE([func_len], [    func_len_result=${#1}])
-fi
-
-if test x"$lt_shell_append" = xyes; then
-  _LT_PROG_FUNCTION_REPLACE([func_append], [    eval "${1}+=\\${2}"])
-
-  _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
-    func_quote_for_eval "${2}"
-dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
-    eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
-
-  # Save a `func_append' function call where possible by direct use of '+='
-  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-else
-  # Save a `func_append' function call even when '+=' is not available
-  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
-    && mv -f "$cfgfile.tmp" "$cfgfile" \
-      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-  test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
-  AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
-fi
-])
-
 # _LT_PATH_CONVERSION_FUNCTIONS
 # -----------------------------
-# Determine which file name conversion functions should be used by
+# Determine what file name conversion functions should be used by
 # func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
 # for certain cross-compile configurations and native mingw.
 m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
diff --git a/dist/m4/ltoptions.m4 b/dist/m4/ltoptions.m4
index 5d9acd8..94b0829 100644
--- a/dist/m4/ltoptions.m4
+++ b/dist/m4/ltoptions.m4
@@ -1,14 +1,14 @@
 # Helper functions for option handling.                    -*- Autoconf -*-
 #
-#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-#   Inc.
+#   Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software
+#   Foundation, Inc.
 #   Written by Gary V. Vaughan, 2004
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 7 ltoptions.m4
+# serial 8 ltoptions.m4
 
 # This is to help aclocal find these macros, as it can't see m4_define.
 AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
@@ -29,7 +29,7 @@
 [m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
 m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
         _LT_MANGLE_DEFUN([$1], [$2]),
-    [m4_warning([Unknown $1 option `$2'])])[]dnl
+    [m4_warning([Unknown $1 option '$2'])])[]dnl
 ])
 
 
@@ -75,13 +75,15 @@
   dnl
   dnl If no reference was made to various pairs of opposing options, then
   dnl we run the default mode handler for the pair.  For example, if neither
-  dnl `shared' nor `disable-shared' was passed, we enable building of shared
+  dnl 'shared' nor 'disable-shared' was passed, we enable building of shared
   dnl archives by default:
   _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
   _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
   _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
   _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
-  		   [_LT_ENABLE_FAST_INSTALL])
+		   [_LT_ENABLE_FAST_INSTALL])
+  _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4],
+		   [_LT_WITH_AIX_SONAME([aix])])
   ])
 ])# _LT_SET_OPTIONS
 
@@ -112,7 +114,7 @@
 [_LT_SET_OPTION([LT_INIT], [dlopen])
 AC_DIAGNOSE([obsolete],
 [$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `dlopen' option into LT_INIT's first parameter.])
+put the 'dlopen' option into LT_INIT's first parameter.])
 ])
 
 dnl aclocal-1.4 backwards compatibility:
@@ -148,7 +150,7 @@
 _LT_SET_OPTION([LT_INIT], [win32-dll])
 AC_DIAGNOSE([obsolete],
 [$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `win32-dll' option into LT_INIT's first parameter.])
+put the 'win32-dll' option into LT_INIT's first parameter.])
 ])
 
 dnl aclocal-1.4 backwards compatibility:
@@ -157,9 +159,9 @@
 
 # _LT_ENABLE_SHARED([DEFAULT])
 # ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+# implement the --enable-shared flag, and supports the 'shared' and
+# 'disable-shared' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'.  If omitted, it defaults to 'yes'.
 m4_define([_LT_ENABLE_SHARED],
 [m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
 AC_ARG_ENABLE([shared],
@@ -172,14 +174,14 @@
     *)
       enable_shared=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_shared=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac],
     [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
@@ -211,9 +213,9 @@
 
 # _LT_ENABLE_STATIC([DEFAULT])
 # ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+# implement the --enable-static flag, and support the 'static' and
+# 'disable-static' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'.  If omitted, it defaults to 'yes'.
 m4_define([_LT_ENABLE_STATIC],
 [m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
 AC_ARG_ENABLE([static],
@@ -226,14 +228,14 @@
     *)
      enable_static=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_static=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac],
     [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
@@ -265,9 +267,9 @@
 
 # _LT_ENABLE_FAST_INSTALL([DEFAULT])
 # ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+# implement the --enable-fast-install flag, and support the 'fast-install'
+# and 'disable-fast-install' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'.  If omitted, it defaults to 'yes'.
 m4_define([_LT_ENABLE_FAST_INSTALL],
 [m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
 AC_ARG_ENABLE([fast-install],
@@ -280,14 +282,14 @@
     *)
       enable_fast_install=no
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for pkg in $enableval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$pkg" = "X$p"; then
 	  enable_fast_install=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac],
     [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
@@ -304,14 +306,14 @@
 [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
 AC_DIAGNOSE([obsolete],
 [$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `fast-install' option into LT_INIT's first parameter.])
+the 'fast-install' option into LT_INIT's first parameter.])
 ])
 
 AU_DEFUN([AC_DISABLE_FAST_INSTALL],
 [_LT_SET_OPTION([LT_INIT], [disable-fast-install])
 AC_DIAGNOSE([obsolete],
 [$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `disable-fast-install' option into LT_INIT's first parameter.])
+the 'disable-fast-install' option into LT_INIT's first parameter.])
 ])
 
 dnl aclocal-1.4 backwards compatibility:
@@ -319,11 +321,64 @@
 dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
 
 
+# _LT_WITH_AIX_SONAME([DEFAULT])
+# ----------------------------------
+# implement the --with-aix-soname flag, and support the `aix-soname=aix'
+# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT
+# is either `aix', `both' or `svr4'.  If omitted, it defaults to `aix'.
+m4_define([_LT_WITH_AIX_SONAME],
+[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl
+shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[[5-9]]*,yes)
+  AC_MSG_CHECKING([which variant of shared library versioning to provide])
+  AC_ARG_WITH([aix-soname],
+    [AS_HELP_STRING([--with-aix-soname=aix|svr4|both],
+      [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])],
+    [case $withval in
+    aix|svr4|both)
+      ;;
+    *)
+      AC_MSG_ERROR([Unknown argument to --with-aix-soname])
+      ;;
+    esac
+    lt_cv_with_aix_soname=$with_aix_soname],
+    [AC_CACHE_VAL([lt_cv_with_aix_soname],
+      [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT)
+    with_aix_soname=$lt_cv_with_aix_soname])
+  AC_MSG_RESULT([$with_aix_soname])
+  if test aix != "$with_aix_soname"; then
+    # For the AIX way of multilib, we name the shared archive member
+    # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+    # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+    # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+    # the AIX toolchain works better with OBJECT_MODE set (default 32).
+    if test 64 = "${OBJECT_MODE-32}"; then
+      shared_archive_member_spec=shr_64
+    else
+      shared_archive_member_spec=shr
+    fi
+  fi
+  ;;
+*)
+  with_aix_soname=aix
+  ;;
+esac
+
+_LT_DECL([], [shared_archive_member_spec], [0],
+    [Shared archive member basename, for filename based shared library versioning on AIX])dnl
+])# _LT_WITH_AIX_SONAME
+
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])])
+
+
 # _LT_WITH_PIC([MODE])
 # --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# implement the --with-pic flag, and support the 'pic-only' and 'no-pic'
 # LT_INIT options.
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+# MODE is either 'yes' or 'no'.  If omitted, it defaults to 'both'.
 m4_define([_LT_WITH_PIC],
 [AC_ARG_WITH([pic],
     [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
@@ -334,19 +389,17 @@
     *)
       pic_mode=default
       # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
       for lt_pkg in $withval; do
-	IFS="$lt_save_ifs"
+	IFS=$lt_save_ifs
 	if test "X$lt_pkg" = "X$lt_p"; then
 	  pic_mode=yes
 	fi
       done
-      IFS="$lt_save_ifs"
+      IFS=$lt_save_ifs
       ;;
     esac],
-    [pic_mode=default])
-
-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+    [pic_mode=m4_default([$1], [default])])
 
 _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
 ])# _LT_WITH_PIC
@@ -359,7 +412,7 @@
 [_LT_SET_OPTION([LT_INIT], [pic-only])
 AC_DIAGNOSE([obsolete],
 [$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `pic-only' option into LT_INIT's first parameter.])
+put the 'pic-only' option into LT_INIT's first parameter.])
 ])
 
 dnl aclocal-1.4 backwards compatibility:
diff --git a/dist/m4/ltsugar.m4 b/dist/m4/ltsugar.m4
index 9000a05..48bc934 100644
--- a/dist/m4/ltsugar.m4
+++ b/dist/m4/ltsugar.m4
@@ -1,6 +1,7 @@
 # ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
 #
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software
+# Foundation, Inc.
 # Written by Gary V. Vaughan, 2004
 #
 # This file is free software; the Free Software Foundation gives
@@ -33,7 +34,7 @@
 # ------------
 # Manipulate m4 lists.
 # These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
+# Autoconf-2.59, which quotes differently.
 m4_define([lt_car], [[$1]])
 m4_define([lt_cdr],
 [m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
@@ -44,7 +45,7 @@
 
 # lt_append(MACRO-NAME, STRING, [SEPARATOR])
 # ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'.
 # Note that neither SEPARATOR nor STRING are expanded; they are appended
 # to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
 # No SEPARATOR is output if MACRO-NAME was previously undefined (different
diff --git a/dist/m4/ltversion.m4 b/dist/m4/ltversion.m4
index 07a8602..fa04b52 100644
--- a/dist/m4/ltversion.m4
+++ b/dist/m4/ltversion.m4
@@ -1,6 +1,6 @@
 # ltversion.m4 -- version numbers			-*- Autoconf -*-
 #
-#   Copyright (C) 2004 Free Software Foundation, Inc.
+#   Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc.
 #   Written by Scott James Remnant, 2004
 #
 # This file is free software; the Free Software Foundation gives
@@ -9,15 +9,15 @@
 
 # @configure_input@
 
-# serial 3337 ltversion.m4
+# serial 4179 ltversion.m4
 # This file is part of GNU Libtool
 
-m4_define([LT_PACKAGE_VERSION], [2.4.2])
-m4_define([LT_PACKAGE_REVISION], [1.3337])
+m4_define([LT_PACKAGE_VERSION], [2.4.6])
+m4_define([LT_PACKAGE_REVISION], [2.4.6])
 
 AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.4.2'
-macro_revision='1.3337'
+[macro_version='2.4.6'
+macro_revision='2.4.6'
 _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
 _LT_DECL(, macro_revision, 0)
 ])
diff --git a/dist/m4/lt~obsolete.m4 b/dist/m4/lt~obsolete.m4
index c573da9..c6b26f8 100644
--- a/dist/m4/lt~obsolete.m4
+++ b/dist/m4/lt~obsolete.m4
@@ -1,6 +1,7 @@
 # lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
 #
-#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+#   Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software
+#   Foundation, Inc.
 #   Written by Scott James Remnant, 2004.
 #
 # This file is free software; the Free Software Foundation gives
@@ -11,7 +12,7 @@
 
 # These exist entirely to fool aclocal when bootstrapping libtool.
 #
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN),
 # which have later been changed to m4_define as they aren't part of the
 # exported API, or moved to Autoconf or Automake where they belong.
 #
@@ -25,7 +26,7 @@
 # included after everything else.  This provides aclocal with the
 # AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
 # because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
 #
 # Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
 # Yes, that means every name once taken will need to remain here until
diff --git a/dist/makevp_c.txt b/dist/makevp_c.txt
index e5898c5..5648115 100644
--- a/dist/makevp_c.txt
+++ b/dist/makevp_c.txt
@@ -1,21 +1,21 @@
-pcre_byte_order.c
-pcre_chartables.c
-pcre_compile.c
-pcre_config.c
-pcre_dfa_exec.c
-pcre_exec.c
-pcre_fullinfo.c
-pcre_get.c
-pcre_globals.c
-pcre_jit_compile.c
-pcre_maketables.c
-pcre_newline.c
-pcre_ord2utf8.c
-pcre_refcount.c
-pcre_string_utils.c
-pcre_study.c
-pcre_tables.c
-pcre_ucd.c
-pcre_valid_utf8.c
-pcre_version.c
-pcre_xclass.c
+pcre_byte_order.c
+pcre_chartables.c
+pcre_compile.c
+pcre_config.c
+pcre_dfa_exec.c
+pcre_exec.c
+pcre_fullinfo.c
+pcre_get.c
+pcre_globals.c
+pcre_jit_compile.c
+pcre_maketables.c
+pcre_newline.c
+pcre_ord2utf8.c
+pcre_refcount.c
+pcre_string_utils.c
+pcre_study.c
+pcre_tables.c
+pcre_ucd.c
+pcre_valid_utf8.c
+pcre_version.c
+pcre_xclass.c
diff --git a/dist/makevp_l.txt b/dist/makevp_l.txt
index 23e1975..9b071e0 100644
--- a/dist/makevp_l.txt
+++ b/dist/makevp_l.txt
@@ -1,21 +1,21 @@
-+pcre_byte_order.obj        &
-+pcre_chartables.obj        &
-+pcre_compile.obj           &
-+pcre_config.obj	    &
-+pcre_dfa_exec.obj          &
-+pcre_exec.obj		    &
-+pcre_fullinfo.obj          &
-+pcre_get.obj		    &
-+pcre_globals.obj           &
-+pcre_jit_compile.obj	    &
-+pcre_maketables.obj        &
-+pcre_newline.obj           &
-+pcre_ord2utf8.obj          &
-+pcre_refcount.obj          &
-+pcre_string_utils.obj      &
-+pcre_study.obj		    &
-+pcre_tables.obj	    &
-+pcre_ucd.obj               &
-+pcre_valid_utf8.obj        &
-+pcre_version.obj           &
-+pcre_xclass.obj
++pcre_byte_order.obj        &
++pcre_chartables.obj        &
++pcre_compile.obj           &
++pcre_config.obj	    &
++pcre_dfa_exec.obj          &
++pcre_exec.obj		    &
++pcre_fullinfo.obj          &
++pcre_get.obj		    &
++pcre_globals.obj           &
++pcre_jit_compile.obj	    &
++pcre_maketables.obj        &
++pcre_newline.obj           &
++pcre_ord2utf8.obj          &
++pcre_refcount.obj          &
++pcre_string_utils.obj      &
++pcre_study.obj		    &
++pcre_tables.obj	    &
++pcre_ucd.obj               &
++pcre_valid_utf8.obj        &
++pcre_version.obj           &
++pcre_xclass.obj
diff --git a/dist/missing b/dist/missing
index db98974..f62bbae 100755
--- a/dist/missing
+++ b/dist/missing
@@ -3,7 +3,7 @@
 
 scriptversion=2013-10-28.13; # UTC
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
 # Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
diff --git a/dist/pcre.h.generic b/dist/pcre.h.generic
index 9216d55..58ed46a 100644
--- a/dist/pcre.h.generic
+++ b/dist/pcre.h.generic
@@ -42,9 +42,9 @@
 /* The current PCRE version information. */
 
 #define PCRE_MAJOR          8
-#define PCRE_MINOR          36
+#define PCRE_MINOR          37
 #define PCRE_PRERELEASE     
-#define PCRE_DATE           2014-09-26
+#define PCRE_DATE           2015-04-28
 
 /* When an application links to a PCRE DLL in Windows, the symbols that are
 imported have to be identified as such. When building PCRE, the appropriate
diff --git a/dist/pcre_compile.c b/dist/pcre_compile.c
index efc0b21..0efad26 100644
--- a/dist/pcre_compile.c
+++ b/dist/pcre_compile.c
@@ -1704,6 +1704,7 @@
   utf      TRUE in UTF-8 / UTF-16 / UTF-32 mode
   atend    TRUE if called when the pattern is complete
   cd       the "compile data" structure
+  recurses    chain of recurse_check to catch mutual recursion
 
 Returns:   the fixed length,
              or -1 if there is no fixed length,
@@ -1713,10 +1714,11 @@
 */
 
 static int
-find_fixedlength(pcre_uchar *code, BOOL utf, BOOL atend, compile_data *cd)
+find_fixedlength(pcre_uchar *code, BOOL utf, BOOL atend, compile_data *cd,
+  recurse_check *recurses)
 {
 int length = -1;
-
+recurse_check this_recurse;
 register int branchlength = 0;
 register pcre_uchar *cc = code + 1 + LINK_SIZE;
 
@@ -1741,7 +1743,8 @@
     case OP_ONCE:
     case OP_ONCE_NC:
     case OP_COND:
-    d = find_fixedlength(cc + ((op == OP_CBRA)? IMM2_SIZE : 0), utf, atend, cd);
+    d = find_fixedlength(cc + ((op == OP_CBRA)? IMM2_SIZE : 0), utf, atend, cd,
+      recurses);
     if (d < 0) return d;
     branchlength += d;
     do cc += GET(cc, 1); while (*cc == OP_ALT);
@@ -1775,7 +1778,15 @@
     cs = ce = (pcre_uchar *)cd->start_code + GET(cc, 1);  /* Start subpattern */
     do ce += GET(ce, 1); while (*ce == OP_ALT);           /* End subpattern */
     if (cc > cs && cc < ce) return -1;                    /* Recursion */
-    d = find_fixedlength(cs + IMM2_SIZE, utf, atend, cd);
+    else   /* Check for mutual recursion */
+      {
+      recurse_check *r = recurses;
+      for (r = recurses; r != NULL; r = r->prev) if (r->group == cs) break;
+      if (r != NULL) return -1;   /* Mutual recursion */
+      }
+    this_recurse.prev = recurses;
+    this_recurse.group = cs;
+    d = find_fixedlength(cs + IMM2_SIZE, utf, atend, cd, &this_recurse);
     if (d < 0) return d;
     branchlength += d;
     cc += 1 + LINK_SIZE;
@@ -2129,32 +2140,60 @@
       {
       case OP_CHAR:
       case OP_CHARI:
+      case OP_NOT:
+      case OP_NOTI:
       case OP_EXACT:
       case OP_EXACTI:
+      case OP_NOTEXACT:
+      case OP_NOTEXACTI:
       case OP_UPTO:
       case OP_UPTOI:
+      case OP_NOTUPTO:
+      case OP_NOTUPTOI:
       case OP_MINUPTO:
       case OP_MINUPTOI:
+      case OP_NOTMINUPTO:
+      case OP_NOTMINUPTOI:
       case OP_POSUPTO:
       case OP_POSUPTOI:
+      case OP_NOTPOSUPTO:
+      case OP_NOTPOSUPTOI:
       case OP_STAR:
       case OP_STARI:
+      case OP_NOTSTAR:
+      case OP_NOTSTARI:
       case OP_MINSTAR:
       case OP_MINSTARI:
+      case OP_NOTMINSTAR:
+      case OP_NOTMINSTARI:
       case OP_POSSTAR:
       case OP_POSSTARI:
+      case OP_NOTPOSSTAR:
+      case OP_NOTPOSSTARI:
       case OP_PLUS:
       case OP_PLUSI:
+      case OP_NOTPLUS:
+      case OP_NOTPLUSI:
       case OP_MINPLUS:
       case OP_MINPLUSI:
+      case OP_NOTMINPLUS:
+      case OP_NOTMINPLUSI:
       case OP_POSPLUS:
       case OP_POSPLUSI:
+      case OP_NOTPOSPLUS:
+      case OP_NOTPOSPLUSI:
       case OP_QUERY:
       case OP_QUERYI:
+      case OP_NOTQUERY:
+      case OP_NOTQUERYI:
       case OP_MINQUERY:
       case OP_MINQUERYI:
+      case OP_NOTMINQUERY:
+      case OP_NOTMINQUERYI:
       case OP_POSQUERY:
       case OP_POSQUERYI:
+      case OP_NOTPOSQUERY:
+      case OP_NOTPOSQUERYI:
       if (HAS_EXTRALEN(code[-1])) code += GET_EXTRALEN(code[-1]);
       break;
       }
@@ -2334,11 +2373,6 @@
 Returns:      TRUE if what is matched could be empty
 */
 
-typedef struct recurse_check {
-  struct recurse_check *prev;
-  const pcre_uchar *group;
-} recurse_check;
-
 static BOOL
 could_be_empty_branch(const pcre_uchar *code, const pcre_uchar *endcode,
   BOOL utf, compile_data *cd, recurse_check *recurses)
@@ -2469,8 +2503,8 @@
       empty_branch = FALSE;
       do
         {
-        if (!empty_branch && could_be_empty_branch(code, endcode, utf, cd, NULL))
-          empty_branch = TRUE;
+        if (!empty_branch && could_be_empty_branch(code, endcode, utf, cd,
+          recurses)) empty_branch = TRUE;
         code += GET(code, 1);
         }
       while (*code == OP_ALT);
@@ -3065,7 +3099,7 @@
 
 static BOOL
 compare_opcodes(const pcre_uchar *code, BOOL utf, const compile_data *cd,
-  const pcre_uint32 *base_list, const pcre_uchar *base_end)
+  const pcre_uint32 *base_list, const pcre_uchar *base_end, int *rec_limit)
 {
 pcre_uchar c;
 pcre_uint32 list[8];
@@ -3082,6 +3116,9 @@
 BOOL accepted, invert_bits;
 BOOL entered_a_group = FALSE;
 
+if (*rec_limit == 0) return FALSE;
+--(*rec_limit);
+
 /* Note: the base_list[1] contains whether the current opcode has greedy
 (represented by a non-zero value) quantifier. This is a different from
 other character type lists, which stores here that the character iterator
@@ -3152,7 +3189,8 @@
 
     while (*next_code == OP_ALT)
       {
-      if (!compare_opcodes(code, utf, cd, base_list, base_end)) return FALSE;
+      if (!compare_opcodes(code, utf, cd, base_list, base_end, rec_limit))
+        return FALSE;
       code = next_code + 1 + LINK_SIZE;
       next_code += GET(next_code, 1);
       }
@@ -3172,7 +3210,7 @@
     /* The bracket content will be checked by the
     OP_BRA/OP_CBRA case above. */
     next_code += 1 + LINK_SIZE;
-    if (!compare_opcodes(next_code, utf, cd, base_list, base_end))
+    if (!compare_opcodes(next_code, utf, cd, base_list, base_end, rec_limit))
       return FALSE;
 
     code += PRIV(OP_lengths)[c];
@@ -3605,11 +3643,20 @@
 const pcre_uchar *end;
 pcre_uchar *repeat_opcode;
 pcre_uint32 list[8];
+int rec_limit;
 
 for (;;)
   {
   c = *code;
 
+  /* When a pattern with bad UTF-8 encoding is compiled with NO_UTF_CHECK,
+  it may compile without complaining, but may get into a loop here if the code
+  pointer points to a bad value. This is, of course a documentated possibility,
+  when NO_UTF_CHECK is set, so it isn't a bug, but we can detect this case and
+  just give up on this optimization. */
+
+  if (c >= OP_TABLE_LENGTH) return;
+
   if (c >= OP_STAR && c <= OP_TYPEPOSUPTO)
     {
     c -= get_repeat_base(c) - OP_STAR;
@@ -3617,7 +3664,8 @@
       get_chr_property_list(code, utf, cd->fcc, list) : NULL;
     list[1] = c == OP_STAR || c == OP_PLUS || c == OP_QUERY || c == OP_UPTO;
 
-    if (end != NULL && compare_opcodes(end, utf, cd, list, end))
+    rec_limit = 1000;
+    if (end != NULL && compare_opcodes(end, utf, cd, list, end, &rec_limit))
       {
       switch(c)
         {
@@ -3673,7 +3721,8 @@
 
       list[1] = (c & 1) == 0;
 
-      if (compare_opcodes(end, utf, cd, list, end))
+      rec_limit = 1000;
+      if (compare_opcodes(end, utf, cd, list, end, &rec_limit))
         {
         switch (c)
           {
@@ -3947,14 +3996,14 @@
   adjust     the amount by which the group is to be moved
   utf        TRUE in UTF-8 / UTF-16 / UTF-32 mode
   cd         contains pointers to tables etc.
-  save_hwm   the hwm forward reference pointer at the start of the group
+  save_hwm_offset   the hwm forward reference offset at the start of the group
 
 Returns:     nothing
 */
 
 static void
 adjust_recurse(pcre_uchar *group, int adjust, BOOL utf, compile_data *cd,
-  pcre_uchar *save_hwm)
+  size_t save_hwm_offset)
 {
 pcre_uchar *ptr = group;
 
@@ -3966,7 +4015,8 @@
   /* See if this recursion is on the forward reference list. If so, adjust the
   reference. */
 
-  for (hc = save_hwm; hc < cd->hwm; hc += LINK_SIZE)
+  for (hc = (pcre_uchar *)cd->start_workspace + save_hwm_offset; hc < cd->hwm;
+       hc += LINK_SIZE)
     {
     offset = (int)GET(hc, 0);
     if (cd->start_code + offset == ptr + 1)
@@ -4171,7 +4221,11 @@
       range. Otherwise, use a recursive call to add the additional range. */
 
       else if (oc < start && od >= start - 1) start = oc; /* Extend downwards */
-      else if (od > end && oc <= end + 1) end = od;       /* Extend upwards */
+      else if (od > end && oc <= end + 1)
+        {
+        end = od;       /* Extend upwards */
+        if (end > classbits_end) classbits_end = (end <= 0xff ? end : 0xff);
+        }
       else n8 += add_to_class(classbits, uchardptr, options, cd, oc, od);
       }
     }
@@ -4411,7 +4465,7 @@
 const pcre_uchar *nestptr = NULL;
 pcre_uchar *previous = NULL;
 pcre_uchar *previous_callout = NULL;
-pcre_uchar *save_hwm = NULL;
+size_t save_hwm_offset = 0;
 pcre_uint8 classbits[32];
 
 /* We can fish out the UTF-8 setting once and for all into a BOOL, but we
@@ -5470,6 +5524,12 @@
       PUT(previous, 1, (int)(code - previous));
       break;   /* End of class handling */
       }
+
+    /* Even though any XCLASS list is now discarded, we must allow for
+    its memory. */
+
+    if (lengthptr != NULL)
+      *lengthptr += (int)(class_uchardata - class_uchardata_base);
 #endif
 
     /* If there are no characters > 255, or they are all to be included or
@@ -5870,6 +5930,7 @@
       {
       register int i;
       int len = (int)(code - previous);
+      size_t base_hwm_offset = save_hwm_offset;
       pcre_uchar *bralink = NULL;
       pcre_uchar *brazeroptr = NULL;
 
@@ -5924,7 +5985,7 @@
         if (repeat_max <= 1)    /* Covers 0, 1, and unlimited */
           {
           *code = OP_END;
-          adjust_recurse(previous, 1, utf, cd, save_hwm);
+          adjust_recurse(previous, 1, utf, cd, save_hwm_offset);
           memmove(previous + 1, previous, IN_UCHARS(len));
           code++;
           if (repeat_max == 0)
@@ -5948,7 +6009,7 @@
           {
           int offset;
           *code = OP_END;
-          adjust_recurse(previous, 2 + LINK_SIZE, utf, cd, save_hwm);
+          adjust_recurse(previous, 2 + LINK_SIZE, utf, cd, save_hwm_offset);
           memmove(previous + 2 + LINK_SIZE, previous, IN_UCHARS(len));
           code += 2 + LINK_SIZE;
           *previous++ = OP_BRAZERO + repeat_type;
@@ -6011,26 +6072,25 @@
             for (i = 1; i < repeat_min; i++)
               {
               pcre_uchar *hc;
-              pcre_uchar *this_hwm = cd->hwm;
+              size_t this_hwm_offset = cd->hwm - cd->start_workspace;
               memcpy(code, previous, IN_UCHARS(len));
 
               while (cd->hwm > cd->start_workspace + cd->workspace_size -
-                     WORK_SIZE_SAFETY_MARGIN - (this_hwm - save_hwm))
+                     WORK_SIZE_SAFETY_MARGIN -
+                     (this_hwm_offset - base_hwm_offset))
                 {
-                size_t save_offset = save_hwm - cd->start_workspace;
-                size_t this_offset = this_hwm - cd->start_workspace;
                 *errorcodeptr = expand_workspace(cd);
                 if (*errorcodeptr != 0) goto FAILED;
-                save_hwm = (pcre_uchar *)cd->start_workspace + save_offset;
-                this_hwm = (pcre_uchar *)cd->start_workspace + this_offset;
                 }
 
-              for (hc = save_hwm; hc < this_hwm; hc += LINK_SIZE)
+              for (hc = (pcre_uchar *)cd->start_workspace + base_hwm_offset;
+                   hc < (pcre_uchar *)cd->start_workspace + this_hwm_offset;
+                   hc += LINK_SIZE)
                 {
                 PUT(cd->hwm, 0, GET(hc, 0) + len);
                 cd->hwm += LINK_SIZE;
                 }
-              save_hwm = this_hwm;
+              base_hwm_offset = this_hwm_offset;
               code += len;
               }
             }
@@ -6075,7 +6135,7 @@
         else for (i = repeat_max - 1; i >= 0; i--)
           {
           pcre_uchar *hc;
-          pcre_uchar *this_hwm = cd->hwm;
+          size_t this_hwm_offset = cd->hwm - cd->start_workspace;
 
           *code++ = OP_BRAZERO + repeat_type;
 
@@ -6097,22 +6157,21 @@
           copying them. */
 
           while (cd->hwm > cd->start_workspace + cd->workspace_size -
-                 WORK_SIZE_SAFETY_MARGIN - (this_hwm - save_hwm))
+                 WORK_SIZE_SAFETY_MARGIN -
+                 (this_hwm_offset - base_hwm_offset))
             {
-            size_t save_offset = save_hwm - cd->start_workspace;
-            size_t this_offset = this_hwm - cd->start_workspace;
             *errorcodeptr = expand_workspace(cd);
             if (*errorcodeptr != 0) goto FAILED;
-            save_hwm = (pcre_uchar *)cd->start_workspace + save_offset;
-            this_hwm = (pcre_uchar *)cd->start_workspace + this_offset;
             }
 
-          for (hc = save_hwm; hc < this_hwm; hc += LINK_SIZE)
+          for (hc = (pcre_uchar *)cd->start_workspace + base_hwm_offset;
+               hc < (pcre_uchar *)cd->start_workspace + this_hwm_offset;
+               hc += LINK_SIZE)
             {
             PUT(cd->hwm, 0, GET(hc, 0) + len + ((i != 0)? 2+LINK_SIZE : 1));
             cd->hwm += LINK_SIZE;
             }
-          save_hwm = this_hwm;
+          base_hwm_offset = this_hwm_offset;
           code += len;
           }
 
@@ -6208,7 +6267,7 @@
               {
               int nlen = (int)(code - bracode);
               *code = OP_END;
-              adjust_recurse(bracode, 1 + LINK_SIZE, utf, cd, save_hwm);
+              adjust_recurse(bracode, 1 + LINK_SIZE, utf, cd, save_hwm_offset);
               memmove(bracode + 1 + LINK_SIZE, bracode, IN_UCHARS(nlen));
               code += 1 + LINK_SIZE;
               nlen += 1 + LINK_SIZE;
@@ -6342,7 +6401,7 @@
         else
           {
           *code = OP_END;
-          adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cd, save_hwm);
+          adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cd, save_hwm_offset);
           memmove(tempcode + 1 + LINK_SIZE, tempcode, IN_UCHARS(len));
           code += 1 + LINK_SIZE;
           len += 1 + LINK_SIZE;
@@ -6391,7 +6450,7 @@
 
         default:
         *code = OP_END;
-        adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cd, save_hwm);
+        adjust_recurse(tempcode, 1 + LINK_SIZE, utf, cd, save_hwm_offset);
         memmove(tempcode + 1 + LINK_SIZE, tempcode, IN_UCHARS(len));
         code += 1 + LINK_SIZE;
         len += 1 + LINK_SIZE;
@@ -6420,15 +6479,25 @@
     parenthesis forms.  */
 
     case CHAR_LEFT_PARENTHESIS:
-    newoptions = options;
-    skipbytes = 0;
-    bravalue = OP_CBRA;
-    save_hwm = cd->hwm;
-    reset_bracount = FALSE;
-
-    /* First deal with various "verbs" that can be introduced by '*'. */
-
     ptr++;
+
+    /* First deal with comments. Putting this code right at the start ensures
+    that comments have no bad side effects. */
+
+    if (ptr[0] == CHAR_QUESTION_MARK && ptr[1] == CHAR_NUMBER_SIGN)
+      {
+      ptr += 2;
+      while (*ptr != CHAR_NULL && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;
+      if (*ptr == CHAR_NULL)
+        {
+        *errorcodeptr = ERR18;
+        goto FAILED;
+        }
+      continue;
+      }
+
+    /* Now deal with various "verbs" that can be introduced by '*'. */
+
     if (ptr[0] == CHAR_ASTERISK && (ptr[1] == ':'
          || (MAX_255(ptr[1]) && ((cd->ctypes[ptr[1]] & ctype_letter) != 0))))
       {
@@ -6549,10 +6618,18 @@
       goto FAILED;
       }
 
+    /* Initialize for "real" parentheses */
+
+    newoptions = options;
+    skipbytes = 0;
+    bravalue = OP_CBRA;
+    save_hwm_offset = cd->hwm - cd->start_workspace;
+    reset_bracount = FALSE;
+
     /* Deal with the extended parentheses; all are introduced by '?', and the
     appearance of any of them means that this is not a capturing group. */
 
-    else if (*ptr == CHAR_QUESTION_MARK)
+    if (*ptr == CHAR_QUESTION_MARK)
       {
       int i, set, unset, namelen;
       int *optset;
@@ -6561,17 +6638,6 @@
 
       switch (*(++ptr))
         {
-        case CHAR_NUMBER_SIGN:                 /* Comment; skip to ket */
-        ptr++;
-        while (*ptr != CHAR_NULL && *ptr != CHAR_RIGHT_PARENTHESIS) ptr++;
-        if (*ptr == CHAR_NULL)
-          {
-          *errorcodeptr = ERR18;
-          goto FAILED;
-          }
-        continue;
-
-
         /* ------------------------------------------------------------ */
         case CHAR_VERTICAL_LINE:  /* Reset capture count for each branch */
         reset_bracount = TRUE;
@@ -6620,8 +6686,13 @@
         if (tempptr[1] == CHAR_QUESTION_MARK &&
               (tempptr[2] == CHAR_EQUALS_SIGN ||
                tempptr[2] == CHAR_EXCLAMATION_MARK ||
-               tempptr[2] == CHAR_LESS_THAN_SIGN))
+                 (tempptr[2] == CHAR_LESS_THAN_SIGN &&
+                   (tempptr[3] == CHAR_EQUALS_SIGN ||
+                    tempptr[3] == CHAR_EXCLAMATION_MARK))))
+          {
+          cd->iscondassert = TRUE;
           break;
+          }
 
         /* Other conditions use OP_CREF/OP_DNCREF/OP_RREF/OP_DNRREF, and all
         need to skip at least 1+IMM2_SIZE bytes at the start of the group. */
@@ -6698,8 +6769,7 @@
             ptr++;
             }
           namelen = (int)(ptr - name);
-          if (lengthptr != NULL && (options & PCRE_DUPNAMES) != 0)
-            *lengthptr += IMM2_SIZE;
+          if (lengthptr != NULL) *lengthptr += IMM2_SIZE;
           }
 
         /* Check the terminator */
@@ -6735,6 +6805,7 @@
             goto FAILED;
             }
           PUT2(code, 2+LINK_SIZE, recno);
+          if (recno > cd->top_backref) cd->top_backref = recno;
           break;
           }
 
@@ -6757,6 +6828,7 @@
           int offset = i++;
           int count = 1;
           recno = GET2(slot, 0);   /* Number from first found */
+          if (recno > cd->top_backref) cd->top_backref = recno;
           for (; i < cd->names_found; i++)
             {
             slot += cd->name_entry_size;
@@ -7114,11 +7186,11 @@
 
           if (!is_recurse) cd->namedrefcount++;
 
-          /* If duplicate names are permitted, we have to allow for a named
-          reference to a duplicated name (this cannot be determined until the
-          second pass). This needs an extra 16-bit data item. */
+          /* We have to allow for a named reference to a duplicated name (this
+          cannot be determined until the second pass). This needs an extra
+          16-bit data item. */
 
-          if ((options & PCRE_DUPNAMES) != 0) *lengthptr += IMM2_SIZE;
+          *lengthptr += IMM2_SIZE;
           }
 
         /* In the real compile, search the name table. We check the name
@@ -7475,12 +7547,22 @@
       goto FAILED;
       }
 
-    /* Assertions used not to be repeatable, but this was changed for Perl
-    compatibility, so all kinds can now be repeated. We copy code into a
+    /* All assertions used not to be repeatable, but this was changed for Perl
+    compatibility. All kinds can now be repeated except for assertions that are
+    conditions (Perl also forbids these to be repeated). We copy code into a
     non-register variable (tempcode) in order to be able to pass its address
-    because some compilers complain otherwise. */
+    because some compilers complain otherwise. At the start of a conditional
+    group whose condition is an assertion, cd->iscondassert is set. We unset it
+    here so as to allow assertions later in the group to be quantified. */
 
-    previous = code;                      /* For handling repetition */
+    if (bravalue >= OP_ASSERT && bravalue <= OP_ASSERTBACK_NOT &&
+        cd->iscondassert)
+      {
+      previous = NULL;
+      cd->iscondassert = FALSE;
+      }
+    else previous = code;
+
     *code = bravalue;
     tempcode = code;
     tempreqvary = cd->req_varyopt;        /* Save value before bracket */
@@ -7727,7 +7809,7 @@
         const pcre_uchar *p;
         pcre_uint32 cf;
 
-        save_hwm = cd->hwm;   /* Normally this is set when '(' is read */
+        save_hwm_offset = cd->hwm - cd->start_workspace;   /* Normally this is set when '(' is read */
         terminator = (*(++ptr) == CHAR_LESS_THAN_SIGN)?
           CHAR_GREATER_THAN_SIGN : CHAR_APOSTROPHE;
 
@@ -8054,6 +8136,7 @@
 unsigned int orig_bracount;
 unsigned int max_bracount;
 branch_chain bc;
+size_t save_hwm_offset;
 
 /* If set, call the external function that checks for stack availability. */
 
@@ -8071,6 +8154,8 @@
 firstchar = reqchar = 0;
 firstcharflags = reqcharflags = REQ_UNSET;
 
+save_hwm_offset = cd->hwm - cd->start_workspace;
+
 /* Accumulate the length for use in the pre-compile phase. Start with the
 length of the BRA and KET and any extra bytes that are required at the
 beginning. We accumulate in a local variable to save frequent testing of
@@ -8212,7 +8297,7 @@
       int fixed_length;
       *code = OP_END;
       fixed_length = find_fixedlength(last_branch,  (options & PCRE_UTF8) != 0,
-        FALSE, cd);
+        FALSE, cd, NULL);
       DPRINTF(("fixed length = %d\n", fixed_length));
       if (fixed_length == -3)
         {
@@ -8273,7 +8358,7 @@
         {
         *code = OP_END;
         adjust_recurse(start_bracket, 1 + LINK_SIZE,
-          (options & PCRE_UTF8) != 0, cd, cd->hwm);
+          (options & PCRE_UTF8) != 0, cd, save_hwm_offset);
         memmove(start_bracket + 1 + LINK_SIZE, start_bracket,
           IN_UCHARS(code - start_bracket));
         *start_bracket = OP_ONCE;
@@ -8497,6 +8582,7 @@
        case OP_RREF:
        case OP_DNRREF:
        case OP_DEF:
+       case OP_FAIL:
        return FALSE;
 
        default:     /* Assertion */
@@ -9081,6 +9167,7 @@
 cd->namedrefcount = 0;
 cd->start_code = cworkspace;
 cd->hwm = cworkspace;
+cd->iscondassert = FALSE;
 cd->start_workspace = cworkspace;
 cd->workspace_size = COMPILE_WORK_SIZE;
 cd->named_groups = named_groups;
@@ -9118,13 +9205,6 @@
   goto PCRE_EARLY_ERROR_RETURN;
   }
 
-/* If there are groups with duplicate names and there are also references by
-name, we must allow for the possibility of named references to duplicated
-groups. These require an extra data item each. */
-
-if (cd->dupnames && cd->namedrefcount > 0)
-  length += cd->namedrefcount * IMM2_SIZE * sizeof(pcre_uchar);
-
 /* Compute the size of the data block for storing the compiled pattern. Integer
 overflow should no longer be possible because nowadays we limit the maximum
 value of cd->names_found and cd->name_entry_size. */
@@ -9183,6 +9263,7 @@
 codestart = cd->name_table + re->name_entry_size * re->name_count;
 cd->start_code = codestart;
 cd->hwm = (pcre_uchar *)(cd->start_workspace);
+cd->iscondassert = FALSE;
 cd->req_varyopt = 0;
 cd->had_accept = FALSE;
 cd->had_pruneorskip = FALSE;
@@ -9319,7 +9400,7 @@
       int end_op = *be;
       *be = OP_END;
       fixed_length = find_fixedlength(cc, (re->options & PCRE_UTF8) != 0, TRUE,
-        cd);
+        cd, NULL);
       *be = end_op;
       DPRINTF(("fixed length = %d\n", fixed_length));
       if (fixed_length < 0)
diff --git a/dist/pcre_dfa_exec.c b/dist/pcre_dfa_exec.c
index 87f4aef..170ce6a 100644
--- a/dist/pcre_dfa_exec.c
+++ b/dist/pcre_dfa_exec.c
@@ -2736,9 +2736,10 @@
             condcode == OP_DNRREF)
           return PCRE_ERROR_DFA_UCOND;
 
-        /* The DEFINE condition is always false */
+        /* The DEFINE condition is always false, and the assertion (?!) is
+        converted to OP_FAIL. */
 
-        if (condcode == OP_DEF)
+        if (condcode == OP_DEF || condcode == OP_FAIL)
           { ADD_ACTIVE(state_offset + codelink + LINK_SIZE + 1, 0); }
 
         /* The only supported version of OP_RREF is for the value RREF_ANY,
diff --git a/dist/pcre_exec.c b/dist/pcre_exec.c
index 654eb9e..c021fe1 100644
--- a/dist/pcre_exec.c
+++ b/dist/pcre_exec.c
@@ -1136,93 +1136,81 @@
     printf("\n");
 #endif
 
-    if (offset < md->offset_max)
+    if (offset >= md->offset_max) goto POSSESSIVE_NON_CAPTURE;
+
+    matched_once = FALSE;
+    code_offset = (int)(ecode - md->start_code);
+
+    save_offset1 = md->offset_vector[offset];
+    save_offset2 = md->offset_vector[offset+1];
+    save_offset3 = md->offset_vector[md->offset_end - number];
+    save_capture_last = md->capture_last;
+
+    DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3));
+
+    /* Each time round the loop, save the current subject position for use
+    when the group matches. For MATCH_MATCH, the group has matched, so we
+    restart it with a new subject starting position, remembering that we had
+    at least one match. For MATCH_NOMATCH, carry on with the alternatives, as
+    usual. If we haven't matched any alternatives in any iteration, check to
+    see if a previous iteration matched. If so, the group has matched;
+    continue from afterwards. Otherwise it has failed; restore the previous
+    capture values before returning NOMATCH. */
+
+    for (;;)
       {
-      matched_once = FALSE;
-      code_offset = (int)(ecode - md->start_code);
-
-      save_offset1 = md->offset_vector[offset];
-      save_offset2 = md->offset_vector[offset+1];
-      save_offset3 = md->offset_vector[md->offset_end - number];
-      save_capture_last = md->capture_last;
-
-      DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3));
-
-      /* Each time round the loop, save the current subject position for use
-      when the group matches. For MATCH_MATCH, the group has matched, so we
-      restart it with a new subject starting position, remembering that we had
-      at least one match. For MATCH_NOMATCH, carry on with the alternatives, as
-      usual. If we haven't matched any alternatives in any iteration, check to
-      see if a previous iteration matched. If so, the group has matched;
-      continue from afterwards. Otherwise it has failed; restore the previous
-      capture values before returning NOMATCH. */
-
-      for (;;)
+      md->offset_vector[md->offset_end - number] =
+        (int)(eptr - md->start_subject);
+      if (op >= OP_SBRA) md->match_function_type = MATCH_CBEGROUP;
+      RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode], offset_top, md,
+        eptrb, RM63);
+      if (rrc == MATCH_KETRPOS)
         {
-        md->offset_vector[md->offset_end - number] =
-          (int)(eptr - md->start_subject);
-        if (op >= OP_SBRA) md->match_function_type = MATCH_CBEGROUP;
-        RMATCH(eptr, ecode + PRIV(OP_lengths)[*ecode], offset_top, md,
-          eptrb, RM63);
-        if (rrc == MATCH_KETRPOS)
+        offset_top = md->end_offset_top;
+        ecode = md->start_code + code_offset;
+        save_capture_last = md->capture_last;
+        matched_once = TRUE;
+        mstart = md->start_match_ptr;    /* In case \K changed it */
+        if (eptr == md->end_match_ptr)   /* Matched an empty string */
           {
-          offset_top = md->end_offset_top;
-          ecode = md->start_code + code_offset;
-          save_capture_last = md->capture_last;
-          matched_once = TRUE;
-          mstart = md->start_match_ptr;    /* In case \K changed it */
-          if (eptr == md->end_match_ptr)   /* Matched an empty string */
-            {
-            do ecode += GET(ecode, 1); while (*ecode == OP_ALT);
-            break;
-            }
-          eptr = md->end_match_ptr;
-          continue;
+          do ecode += GET(ecode, 1); while (*ecode == OP_ALT);
+          break;
           }
-
-        /* See comment in the code for capturing groups above about handling
-        THEN. */
-
-        if (rrc == MATCH_THEN)
-          {
-          next = ecode + GET(ecode,1);
-          if (md->start_match_ptr < next &&
-              (*ecode == OP_ALT || *next == OP_ALT))
-            rrc = MATCH_NOMATCH;
-          }
-
-        if (rrc != MATCH_NOMATCH) RRETURN(rrc);
-        md->capture_last = save_capture_last;
-        ecode += GET(ecode, 1);
-        if (*ecode != OP_ALT) break;
+        eptr = md->end_match_ptr;
+        continue;
         }
 
-      if (!matched_once)
+      /* See comment in the code for capturing groups above about handling
+      THEN. */
+
+      if (rrc == MATCH_THEN)
         {
-        md->offset_vector[offset] = save_offset1;
-        md->offset_vector[offset+1] = save_offset2;
-        md->offset_vector[md->offset_end - number] = save_offset3;
+        next = ecode + GET(ecode,1);
+        if (md->start_match_ptr < next &&
+            (*ecode == OP_ALT || *next == OP_ALT))
+          rrc = MATCH_NOMATCH;
         }
 
-      if (allow_zero || matched_once)
-        {
-        ecode += 1 + LINK_SIZE;
-        break;
-        }
-
-      RRETURN(MATCH_NOMATCH);
+      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
+      md->capture_last = save_capture_last;
+      ecode += GET(ecode, 1);
+      if (*ecode != OP_ALT) break;
       }
 
-    /* FALL THROUGH ... Insufficient room for saving captured contents. Treat
-    as a non-capturing bracket. */
+    if (!matched_once)
+      {
+      md->offset_vector[offset] = save_offset1;
+      md->offset_vector[offset+1] = save_offset2;
+      md->offset_vector[md->offset_end - number] = save_offset3;
+      }
 
-    /* VVVVVVVVVVVVVVVVVVVVVVVVV */
-    /* VVVVVVVVVVVVVVVVVVVVVVVVV */
+    if (allow_zero || matched_once)
+      {
+      ecode += 1 + LINK_SIZE;
+      break;
+      }
 
-    DPRINTF(("insufficient capture room: treat as non-capturing\n"));
-
-    /* VVVVVVVVVVVVVVVVVVVVVVVVV */
-    /* VVVVVVVVVVVVVVVVVVVVVVVVV */
+    RRETURN(MATCH_NOMATCH);
 
     /* Non-capturing possessive bracket with unlimited repeat. We come here
     from BRAZERO with allow_zero = TRUE. The code is similar to the above,
@@ -1388,6 +1376,7 @@
       break;
 
       case OP_DEF:     /* DEFINE - always false */
+      case OP_FAIL:    /* From optimized (?!) condition */
       break;
 
       /* The condition is an assertion. Call match() to evaluate it - setting
@@ -1404,8 +1393,11 @@
         condition = TRUE;
 
         /* Advance ecode past the assertion to the start of the first branch,
-        but adjust it so that the general choosing code below works. */
+        but adjust it so that the general choosing code below works. If the
+        assertion has a quantifier that allows zero repeats we must skip over
+        the BRAZERO. This is a lunatic thing to do, but somebody did! */
 
+        if (*ecode == OP_BRAZERO) ecode++;
         ecode += GET(ecode, 1);
         while (*ecode == OP_ALT) ecode += GET(ecode, 1);
         ecode += 1 + LINK_SIZE - PRIV(OP_lengths)[condcode];
@@ -1474,7 +1466,18 @@
       md->offset_vector[offset] =
         md->offset_vector[md->offset_end - number];
       md->offset_vector[offset+1] = (int)(eptr - md->start_subject);
-      if (offset_top <= offset) offset_top = offset + 2;
+
+      /* If this group is at or above the current highwater mark, ensure that
+      any groups between the current high water mark and this group are marked
+      unset and then update the high water mark. */
+
+      if (offset >= offset_top)
+        {
+        register int *iptr = md->offset_vector + offset_top;
+        register int *iend = md->offset_vector + offset;
+        while (iptr < iend) *iptr++ = -1;
+        offset_top = offset + 2;
+        }
       }
     ecode += 1 + IMM2_SIZE;
     break;
@@ -1826,7 +1829,11 @@
         are defined in a range that can be tested for. */
 
         if (rrc >= MATCH_BACKTRACK_MIN && rrc <= MATCH_BACKTRACK_MAX)
+          {
+          if (new_recursive.offset_save != stacksave)
+            (PUBL(free))(new_recursive.offset_save);
           RRETURN(MATCH_NOMATCH);
+          }
 
         /* Any return code other than NOMATCH is an error. */
 
@@ -3476,7 +3483,7 @@
           if (possessive) continue;    /* No backtracking */
           for(;;)
             {
-            if (eptr == pp) goto TAIL_RECURSE;
+            if (eptr <= pp) goto TAIL_RECURSE;
             RMATCH(eptr, ecode, offset_top, md, eptrb, RM23);
             if (rrc != MATCH_NOMATCH) RRETURN(rrc);
 #ifdef SUPPORT_UCP
@@ -3897,7 +3904,7 @@
           if (possessive) continue;    /* No backtracking */
           for(;;)
             {
-            if (eptr == pp) goto TAIL_RECURSE;
+            if (eptr <= pp) goto TAIL_RECURSE;
             RMATCH(eptr, ecode, offset_top, md, eptrb, RM30);
             if (rrc != MATCH_NOMATCH) RRETURN(rrc);
             eptr--;
@@ -4032,7 +4039,7 @@
           if (possessive) continue;    /* No backtracking */
           for(;;)
             {
-            if (eptr == pp) goto TAIL_RECURSE;
+            if (eptr <= pp) goto TAIL_RECURSE;
             RMATCH(eptr, ecode, offset_top, md, eptrb, RM34);
             if (rrc != MATCH_NOMATCH) RRETURN(rrc);
             eptr--;
@@ -5603,7 +5610,7 @@
         if (possessive) continue;    /* No backtracking */
         for(;;)
           {
-          if (eptr == pp) goto TAIL_RECURSE;
+          if (eptr <= pp) goto TAIL_RECURSE;
           RMATCH(eptr, ecode, offset_top, md, eptrb, RM44);
           if (rrc != MATCH_NOMATCH) RRETURN(rrc);
           eptr--;
@@ -5645,12 +5652,17 @@
 
         if (possessive) continue;    /* No backtracking */
 
+        /* We use <= pp rather than == pp to detect the start of the run while
+        backtracking because the use of \C in UTF mode can cause BACKCHAR to
+        move back past pp. This is just palliative; the use of \C in UTF mode
+        is fraught with danger. */
+
         for(;;)
           {
           int lgb, rgb;
           PCRE_PUCHAR fptr;
 
-          if (eptr == pp) goto TAIL_RECURSE;   /* At start of char run */
+          if (eptr <= pp) goto TAIL_RECURSE;   /* At start of char run */
           RMATCH(eptr, ecode, offset_top, md, eptrb, RM45);
           if (rrc != MATCH_NOMATCH) RRETURN(rrc);
 
@@ -5668,7 +5680,7 @@
 
           for (;;)
             {
-            if (eptr == pp) goto TAIL_RECURSE;   /* At start of char run */
+            if (eptr <= pp) goto TAIL_RECURSE;   /* At start of char run */
             fptr = eptr - 1;
             if (!utf) c = *fptr; else
               {
@@ -5918,7 +5930,7 @@
         if (possessive) continue;    /* No backtracking */
         for(;;)
           {
-          if (eptr == pp) goto TAIL_RECURSE;
+          if (eptr <= pp) goto TAIL_RECURSE;
           RMATCH(eptr, ecode, offset_top, md, eptrb, RM46);
           if (rrc != MATCH_NOMATCH) RRETURN(rrc);
           eptr--;
diff --git a/dist/pcre_internal.h b/dist/pcre_internal.h
index 02d3ab1..dd0ac7f 100644
--- a/dist/pcre_internal.h
+++ b/dist/pcre_internal.h
@@ -2446,6 +2446,7 @@
   BOOL had_pruneorskip;             /* (*PRUNE) or (*SKIP) encountered */
   BOOL check_lookbehind;            /* Lookbehinds need later checking */
   BOOL dupnames;                    /* Duplicate names exist */
+  BOOL iscondassert;                /* Next assert is a condition */
   int  nltype;                      /* Newline type */
   int  nllen;                       /* Newline string length */
   pcre_uchar nl[4];                 /* Newline string when fixed length */
@@ -2459,6 +2460,13 @@
   pcre_uchar *current_branch;
 } branch_chain;
 
+/* Structure for mutual recursion detection. */
+
+typedef struct recurse_check {
+  struct recurse_check *prev;
+  const pcre_uchar *group;
+} recurse_check;
+
 /* Structure for items in a linked list that represents an explicit recursive
 call within the pattern; used by pcre_exec(). */
 
diff --git a/dist/pcre_jit_compile.c b/dist/pcre_jit_compile.c
index 256e3a4..debdf6e 100644
--- a/dist/pcre_jit_compile.c
+++ b/dist/pcre_jit_compile.c
@@ -52,8 +52,8 @@
 we just include it. This way we don't need to touch the build
 system files. */
 
-#define SLJIT_MALLOC(size) (PUBL(malloc))(size)
-#define SLJIT_FREE(ptr) (PUBL(free))(ptr)
+#define SLJIT_MALLOC(size, allocator_data) (PUBL(malloc))(size)
+#define SLJIT_FREE(ptr, allocator_data) (PUBL(free))(ptr)
 #define SLJIT_CONFIG_AUTO 1
 #define SLJIT_CONFIG_STATIC 1
 #define SLJIT_VERBOSE 0
@@ -179,7 +179,7 @@
 
 typedef struct executable_functions {
   void *executable_funcs[JIT_NUMBER_OF_COMPILE_MODES];
-  sljit_uw *read_only_data[JIT_NUMBER_OF_COMPILE_MODES];
+  void *read_only_data_heads[JIT_NUMBER_OF_COMPILE_MODES];
   sljit_uw executable_sizes[JIT_NUMBER_OF_COMPILE_MODES];
   PUBL(jit_callback) callback;
   void *userdata;
@@ -322,12 +322,8 @@
   pcre_uchar *start;
   /* Maps private data offset to each opcode. */
   sljit_si *private_data_ptrs;
-  /* This read-only data is available during runtime. */
-  sljit_uw *read_only_data;
-  /* The total size of the read-only data. */
-  sljit_uw read_only_data_size;
-  /* The next free entry of the read_only_data. */
-  sljit_uw *read_only_data_ptr;
+  /* Chain list of read-only data ptrs. */
+  void *read_only_data_head;
   /* Tells whether the capturing bracket is optimized. */
   pcre_uint8 *optimized_cbracket;
   /* Tells whether the starting offset is a target of then. */
@@ -545,7 +541,7 @@
 
 #define READ_CHAR_MAX 0x7fffffff
 
-static pcre_uchar* bracketend(pcre_uchar* cc)
+static pcre_uchar *bracketend(pcre_uchar *cc)
 {
 SLJIT_ASSERT((*cc >= OP_ASSERT && *cc <= OP_ASSERTBACK_NOT) || (*cc >= OP_ONCE && *cc <= OP_SCOND));
 do cc += GET(cc, 1); while (*cc == OP_ALT);
@@ -554,7 +550,7 @@
 return cc;
 }
 
-static int no_alternatives(pcre_uchar* cc)
+static int no_alternatives(pcre_uchar *cc)
 {
 int count = 0;
 SLJIT_ASSERT((*cc >= OP_ASSERT && *cc <= OP_ASSERTBACK_NOT) || (*cc >= OP_ONCE && *cc <= OP_SCOND));
@@ -802,16 +798,6 @@
     cc += 1 + IMM2_SIZE;
     break;
 
-    case OP_BRA:
-    case OP_CBRA:
-    case OP_SBRA:
-    case OP_SCBRA:
-    count = no_alternatives(cc);
-    if (count > 4)
-      common->read_only_data_size += count * sizeof(sljit_uw);
-    cc += 1 + LINK_SIZE + (*cc == OP_CBRA || *cc == OP_SCBRA ? IMM2_SIZE : 0);
-    break;
-
     case OP_CBRAPOS:
     case OP_SCBRAPOS:
     common->optimized_cbracket[GET2(cc, 1 + LINK_SIZE)] = 0;
@@ -1237,7 +1223,7 @@
 }
 
 /* Returns with a frame_types (always < 0) if no need for frame. */
-static int get_framesize(compiler_common *common, pcre_uchar *cc, pcre_uchar *ccend, BOOL recursive, BOOL* needs_control_head)
+static int get_framesize(compiler_common *common, pcre_uchar *cc, pcre_uchar *ccend, BOOL recursive, BOOL *needs_control_head)
 {
 int length = 0;
 int possessive = 0;
@@ -1547,7 +1533,11 @@
     {
     case OP_KET:
     if (PRIVATE_DATA(cc) != 0)
+      {
       private_data_length++;
+      SLJIT_ASSERT(PRIVATE_DATA(cc + 1) != 0);
+      cc += PRIVATE_DATA(cc + 1);
+      }
     cc += 1 + LINK_SIZE;
     break;
 
@@ -1562,6 +1552,7 @@
     case OP_SBRAPOS:
     case OP_SCOND:
     private_data_length++;
+    SLJIT_ASSERT(PRIVATE_DATA(cc) != 0);
     cc += 1 + LINK_SIZE;
     break;
 
@@ -1724,6 +1715,8 @@
         {
         count = 1;
         srcw[0] = PRIVATE_DATA(cc);
+        SLJIT_ASSERT(PRIVATE_DATA(cc + 1) != 0);
+        cc += PRIVATE_DATA(cc + 1);
         }
       cc += 1 + LINK_SIZE;
       break;
@@ -2030,7 +2023,7 @@
   }
 }
 
-static SLJIT_INLINE void add_jump(struct sljit_compiler *compiler, jump_list **list, struct sljit_jump* jump)
+static SLJIT_INLINE void add_jump(struct sljit_compiler *compiler, jump_list **list, struct sljit_jump *jump)
 {
 jump_list *list_item = sljit_alloc_memory(compiler, sizeof(jump_list));
 if (list_item)
@@ -2044,7 +2037,7 @@
 static void add_stub(compiler_common *common, struct sljit_jump *start)
 {
 DEFINE_COMPILER;
-stub_list* list_item = sljit_alloc_memory(compiler, sizeof(stub_list));
+stub_list *list_item = sljit_alloc_memory(compiler, sizeof(stub_list));
 
 if (list_item)
   {
@@ -2058,7 +2051,7 @@
 static void flush_stubs(compiler_common *common)
 {
 DEFINE_COMPILER;
-stub_list* list_item = common->stubs;
+stub_list *list_item = common->stubs;
 
 while (list_item)
   {
@@ -2089,7 +2082,7 @@
 DEFINE_COMPILER;
 
 OP2(SLJIT_SUB | SLJIT_SET_E, COUNT_MATCH, 0, COUNT_MATCH, 0, SLJIT_IMM, 1);
-add_jump(compiler, &common->calllimit, JUMP(SLJIT_C_ZERO));
+add_jump(compiler, &common->calllimit, JUMP(SLJIT_ZERO));
 }
 
 static SLJIT_INLINE void allocate_stack(compiler_common *common, int size)
@@ -2105,7 +2098,7 @@
 OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS0, TMP1, 0);
 OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS1, TMP1, 0);
 #endif
-add_stub(common, CMP(SLJIT_C_GREATER, STACK_TOP, 0, STACK_LIMIT, 0));
+add_stub(common, CMP(SLJIT_GREATER, STACK_TOP, 0, STACK_LIMIT, 0));
 }
 
 static SLJIT_INLINE void free_stack(compiler_common *common, int size)
@@ -2114,6 +2107,40 @@
 OP2(SLJIT_SUB, STACK_TOP, 0, STACK_TOP, 0, SLJIT_IMM, size * sizeof(sljit_sw));
 }
 
+static sljit_uw * allocate_read_only_data(compiler_common *common, sljit_uw size)
+{
+DEFINE_COMPILER;
+sljit_uw *result;
+
+if (SLJIT_UNLIKELY(sljit_get_compiler_error(compiler)))
+  return NULL;
+
+result = (sljit_uw *)SLJIT_MALLOC(size + sizeof(sljit_uw), compiler->allocator_data);
+if (SLJIT_UNLIKELY(result == NULL))
+  {
+  sljit_set_compiler_memory_error(compiler);
+  return NULL;
+  }
+
+*(void**)result = common->read_only_data_head;
+common->read_only_data_head = (void *)result;
+return result + 1;
+}
+
+static void free_read_only_data(void *current, void *allocator_data)
+{
+void *next;
+
+SLJIT_UNUSED_ARG(allocator_data);
+
+while (current != NULL)
+  {
+  next = *(void**)current;
+  SLJIT_FREE(current, allocator_data);
+  current = next;
+  }
+}
+
 static SLJIT_INLINE void reset_ovector(compiler_common *common, int length)
 {
 DEFINE_COMPILER;
@@ -2136,7 +2163,7 @@
   loop = LABEL();
   OP1(SLJIT_MOVU, SLJIT_MEM1(SLJIT_R1), sizeof(sljit_sw), SLJIT_R0, 0);
   OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_R2, 0, SLJIT_R2, 0, SLJIT_IMM, 1);
-  JUMPTO(SLJIT_C_NOT_ZERO, loop);
+  JUMPTO(SLJIT_NOT_ZERO, loop);
   }
 }
 
@@ -2162,7 +2189,7 @@
   loop = LABEL();
   OP1(SLJIT_MOVU, SLJIT_MEM1(TMP2), sizeof(sljit_sw), TMP1, 0);
   OP2(SLJIT_SUB | SLJIT_SET_E, STACK_TOP, 0, STACK_TOP, 0, SLJIT_IMM, 1);
-  JUMPTO(SLJIT_C_NOT_ZERO, loop);
+  JUMPTO(SLJIT_NOT_ZERO, loop);
   }
 
 OP1(SLJIT_MOV, STACK_TOP, 0, ARGUMENTS, 0);
@@ -2218,7 +2245,7 @@
 OP1(SLJIT_MOV, SLJIT_R0, 0, SLJIT_MEM1(SLJIT_R0), SLJIT_OFFSETOF(jit_arguments, begin));
 GET_LOCAL_BASE(SLJIT_S0, 0, OVECTOR_START);
 /* Unlikely, but possible */
-early_quit = CMP(SLJIT_C_EQUAL, SLJIT_R1, 0, SLJIT_IMM, 0);
+early_quit = CMP(SLJIT_EQUAL, SLJIT_R1, 0, SLJIT_IMM, 0);
 loop = LABEL();
 OP2(SLJIT_SUB, SLJIT_S1, 0, SLJIT_MEM1(SLJIT_S0), 0, SLJIT_R0, 0);
 OP2(SLJIT_ADD, SLJIT_S0, 0, SLJIT_S0, 0, SLJIT_IMM, sizeof(sljit_sw));
@@ -2228,7 +2255,7 @@
 #endif
 OP1(SLJIT_MOVU_SI, SLJIT_MEM1(SLJIT_R2), sizeof(int), SLJIT_S1, 0);
 OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_R1, 0, SLJIT_R1, 0, SLJIT_IMM, 1);
-JUMPTO(SLJIT_C_NOT_ZERO, loop);
+JUMPTO(SLJIT_NOT_ZERO, loop);
 JUMPHERE(early_quit);
 
 /* Calculate the return value, which is the maximum ovector value. */
@@ -2241,7 +2268,7 @@
   loop = LABEL();
   OP1(SLJIT_MOVU, SLJIT_R2, 0, SLJIT_MEM1(SLJIT_R0), -(2 * (sljit_sw)sizeof(sljit_sw)));
   OP2(SLJIT_SUB, SLJIT_R1, 0, SLJIT_R1, 0, SLJIT_IMM, 1);
-  CMPTO(SLJIT_C_EQUAL, SLJIT_R2, 0, SLJIT_S2, 0, loop);
+  CMPTO(SLJIT_EQUAL, SLJIT_R2, 0, SLJIT_S2, 0, loop);
   OP1(SLJIT_MOV, SLJIT_RETURN_REG, 0, SLJIT_R1, 0);
   }
 else
@@ -2260,13 +2287,13 @@
 OP1(SLJIT_MOV, SLJIT_R1, 0, ARGUMENTS, 0);
 OP1(SLJIT_MOV, SLJIT_RETURN_REG, 0, SLJIT_IMM, PCRE_ERROR_PARTIAL);
 OP1(SLJIT_MOV_SI, SLJIT_R2, 0, SLJIT_MEM1(SLJIT_R1), SLJIT_OFFSETOF(jit_arguments, real_offset_count));
-CMPTO(SLJIT_C_SIG_LESS, SLJIT_R2, 0, SLJIT_IMM, 2, quit);
+CMPTO(SLJIT_SIG_LESS, SLJIT_R2, 0, SLJIT_IMM, 2, quit);
 
 /* Store match begin and end. */
 OP1(SLJIT_MOV, SLJIT_S0, 0, SLJIT_MEM1(SLJIT_R1), SLJIT_OFFSETOF(jit_arguments, begin));
 OP1(SLJIT_MOV, SLJIT_R1, 0, SLJIT_MEM1(SLJIT_R1), SLJIT_OFFSETOF(jit_arguments, offsets));
 
-jump = CMP(SLJIT_C_SIG_LESS, SLJIT_R2, 0, SLJIT_IMM, 3);
+jump = CMP(SLJIT_SIG_LESS, SLJIT_R2, 0, SLJIT_IMM, 3);
 OP2(SLJIT_SUB, SLJIT_R2, 0, SLJIT_MEM1(SLJIT_SP), common->mode == JIT_PARTIAL_HARD_COMPILE ? common->start_ptr : (common->hit_start + (int)sizeof(sljit_sw)), SLJIT_S0, 0);
 #if defined COMPILE_PCRE16 || defined COMPILE_PCRE32
 OP2(SLJIT_ASHR, SLJIT_R2, 0, SLJIT_R2, 0, SLJIT_IMM, UCHAR_SHIFT);
@@ -2302,19 +2329,19 @@
   OP2(SLJIT_ADD, TMP1, 0, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, SLJIT_IMM, 1);
   /* Jumps if start_used_ptr < STR_PTR, or start_used_ptr == -1. Although overwriting
   is not necessary if start_used_ptr == STR_PTR, it does not hurt as well. */
-  jump = CMP(SLJIT_C_LESS_EQUAL, TMP1, 0, STR_PTR, 0);
+  jump = CMP(SLJIT_LESS_EQUAL, TMP1, 0, STR_PTR, 0);
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0);
   JUMPHERE(jump);
   }
 else if (common->mode == JIT_PARTIAL_HARD_COMPILE)
   {
-  jump = CMP(SLJIT_C_LESS_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0);
+  jump = CMP(SLJIT_LESS_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0);
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0);
   JUMPHERE(jump);
   }
 }
 
-static SLJIT_INLINE BOOL char_has_othercase(compiler_common *common, pcre_uchar* cc)
+static SLJIT_INLINE BOOL char_has_othercase(compiler_common *common, pcre_uchar *cc)
 {
 /* Detects if the character has an othercase. */
 unsigned int c;
@@ -2357,7 +2384,7 @@
 return TABLE_GET(c, common->fcc, c);
 }
 
-static unsigned int char_get_othercase_bit(compiler_common *common, pcre_uchar* cc)
+static unsigned int char_get_othercase_bit(compiler_common *common, pcre_uchar *cc)
 {
 /* Detects if the character and its othercase has only 1 bit difference. */
 unsigned int c, oc, bit;
@@ -2445,9 +2472,9 @@
   return;
 
 if (!force)
-  jump = CMP(SLJIT_C_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0);
+  jump = CMP(SLJIT_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0);
 else if (common->mode == JIT_PARTIAL_SOFT_COMPILE)
-  jump = CMP(SLJIT_C_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, SLJIT_IMM, -1);
+  jump = CMP(SLJIT_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, SLJIT_IMM, -1);
 
 if (common->mode == JIT_PARTIAL_SOFT_COMPILE)
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, 0);
@@ -2471,20 +2498,20 @@
 
 if (common->mode == JIT_COMPILE)
   {
-  add_jump(compiler, end_reached, CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
+  add_jump(compiler, end_reached, CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
   return;
   }
 
-jump = CMP(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0);
+jump = CMP(SLJIT_LESS, STR_PTR, 0, STR_END, 0);
 if (common->mode == JIT_PARTIAL_SOFT_COMPILE)
   {
-  add_jump(compiler, end_reached, CMP(SLJIT_C_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0));
+  add_jump(compiler, end_reached, CMP(SLJIT_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0));
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, 0);
   add_jump(compiler, end_reached, JUMP(SLJIT_JUMP));
   }
 else
   {
-  add_jump(compiler, end_reached, CMP(SLJIT_C_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0));
+  add_jump(compiler, end_reached, CMP(SLJIT_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0));
   if (common->partialmatchlabel != NULL)
     JUMPTO(SLJIT_JUMP, common->partialmatchlabel);
   else
@@ -2500,13 +2527,13 @@
 
 if (common->mode == JIT_COMPILE)
   {
-  add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
+  add_jump(compiler, backtracks, CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
   return;
   }
 
 /* Partial matching mode. */
-jump = CMP(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0);
-add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0));
+jump = CMP(SLJIT_LESS, STR_PTR, 0, STR_END, 0);
+add_jump(compiler, backtracks, CMP(SLJIT_GREATER_EQUAL, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0));
 if (common->mode == JIT_PARTIAL_SOFT_COMPILE)
   {
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, 0);
@@ -2539,7 +2566,7 @@
   {
   if (max < 128) return;
 
-  jump = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
+  jump = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
   OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
   add_jump(compiler, &common->utfreadchar, JUMP(SLJIT_FAST_CALL));
   OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
@@ -2553,7 +2580,7 @@
   if (max < 0xd800) return;
 
   OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, 0xd800);
-  jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
+  jump = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
   /* TMP2 contains the high surrogate. */
   OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
   OP2(SLJIT_ADD, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x40);
@@ -2572,7 +2599,7 @@
 /* Tells whether the character codes below 128 are enough
 to determine a match. */
 const pcre_uint8 value = nclass ? 0xff : 0;
-const pcre_uint8* end = bitset + 32;
+const pcre_uint8 *end = bitset + 32;
 
 bitset += 16;
 do
@@ -2601,7 +2628,7 @@
 
 if (full_read)
   {
-  jump = CMP(SLJIT_C_LESS, TMP2, 0, SLJIT_IMM, 0xc0);
+  jump = CMP(SLJIT_LESS, TMP2, 0, SLJIT_IMM, 0xc0);
   OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP2), (sljit_sw)PRIV(utf8_table4) - 0xc0);
   OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
   JUMPHERE(jump);
@@ -2636,14 +2663,14 @@
   {
   if (max < 128 && !update_str_ptr) return;
 
-  jump = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
+  jump = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
   if (min >= 0x10000)
     {
     OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, 0xf0);
     if (update_str_ptr)
       OP1(SLJIT_MOV_UB, RETURN_ADDR, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
     OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
-    jump2 = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0x7);
+    jump2 = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 0x7);
     OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 6);
     OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3f);
     OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
@@ -2667,7 +2694,7 @@
     if (update_str_ptr)
       OP1(SLJIT_MOV_UB, RETURN_ADDR, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
     OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
-    jump2 = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0xf);
+    jump2 = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 0xf);
     OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 6);
     OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3f);
     OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
@@ -2712,7 +2739,7 @@
   if (max >= 0x10000)
     {
     OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, 0xd800);
-    jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
+    jump = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
     /* TMP2 contains the high surrogate. */
     OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
     OP2(SLJIT_ADD, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x40);
@@ -2728,7 +2755,7 @@
 
   /* Skip low surrogate if necessary. */
   OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, 0xd800);
-  jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
+  jump = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
   if (update_str_ptr)
     OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
   if (max >= 0xd800)
@@ -2765,7 +2792,7 @@
   /* This can be an extra read in some situations, but hopefully
   it is needed in most cases. */
   OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP2), common->ctypes);
-  jump = CMP(SLJIT_C_LESS, TMP2, 0, SLJIT_IMM, 0xc0);
+  jump = CMP(SLJIT_LESS, TMP2, 0, SLJIT_IMM, 0xc0);
   if (!update_str_ptr)
     {
     OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
@@ -2775,7 +2802,7 @@
     OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3f);
     OP2(SLJIT_OR, TMP2, 0, TMP2, 0, TMP1, 0);
     OP1(SLJIT_MOV, TMP1, 0, SLJIT_IMM, 0);
-    jump2 = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 255);
+    jump2 = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 255);
     OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP2), common->ctypes);
     JUMPHERE(jump2);
     }
@@ -2789,7 +2816,7 @@
 #if !defined COMPILE_PCRE8
 /* The ctypes array contains only 256 values. */
 OP1(SLJIT_MOV, TMP1, 0, SLJIT_IMM, 0);
-jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 255);
+jump = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 255);
 #endif
 OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP2), common->ctypes);
 #if !defined COMPILE_PCRE8
@@ -2801,7 +2828,7 @@
   {
   /* Skip low surrogate if necessary. */
   OP2(SLJIT_SUB, TMP2, 0, TMP2, 0, SLJIT_IMM, 0xd800);
-  jump = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
+  jump = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 0xdc00 - 0xd800 - 1);
   OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
   JUMPHERE(jump);
   }
@@ -2822,7 +2849,7 @@
   OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), -IN_UCHARS(1));
   OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
   OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0xc0);
-  CMPTO(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, 0x80, label);
+  CMPTO(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, 0x80, label);
   return;
   }
 #elif defined COMPILE_PCRE16
@@ -2833,7 +2860,7 @@
   /* Skip low surrogate if necessary. */
   OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0xfc00);
   OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xdc00);
-  OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+  OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
   OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
   OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
   return;
@@ -2852,26 +2879,26 @@
 if (nltype == NLTYPE_ANY)
   {
   add_jump(compiler, &common->anynewline, JUMP(SLJIT_FAST_CALL));
-  add_jump(compiler, backtracks, JUMP(jumpifmatch ? SLJIT_C_NOT_ZERO : SLJIT_C_ZERO));
+  add_jump(compiler, backtracks, JUMP(jumpifmatch ? SLJIT_NOT_ZERO : SLJIT_ZERO));
   }
 else if (nltype == NLTYPE_ANYCRLF)
   {
   if (jumpifmatch)
     {
-    add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR));
-    add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL));
+    add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR));
+    add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL));
     }
   else
     {
-    jump = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
-    add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL));
+    jump = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
+    add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL));
     JUMPHERE(jump);
     }
   }
 else
   {
   SLJIT_ASSERT(nltype == NLTYPE_FIXED && common->newline < 256);
-  add_jump(compiler, backtracks, CMP(jumpifmatch ? SLJIT_C_EQUAL : SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, common->newline));
+  add_jump(compiler, backtracks, CMP(jumpifmatch ? SLJIT_EQUAL : SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, common->newline));
   }
 }
 
@@ -2894,7 +2921,7 @@
 
 /* Searching for the first zero. */
 OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x800);
-jump = JUMP(SLJIT_C_NOT_ZERO);
+jump = JUMP(SLJIT_NOT_ZERO);
 /* Two byte sequence. */
 OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
 OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, IN_UCHARS(2));
@@ -2908,7 +2935,7 @@
 OP2(SLJIT_OR, TMP1, 0, TMP1, 0, TMP2, 0);
 
 OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x10000);
-jump = JUMP(SLJIT_C_NOT_ZERO);
+jump = JUMP(SLJIT_NOT_ZERO);
 /* Three byte sequence. */
 OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(2));
 OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, IN_UCHARS(3));
@@ -2942,14 +2969,14 @@
 
 /* Searching for the first zero. */
 OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x800);
-jump = JUMP(SLJIT_C_NOT_ZERO);
+jump = JUMP(SLJIT_NOT_ZERO);
 /* Two byte sequence. */
 OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
 sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
 
 JUMPHERE(jump);
 OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x400);
-OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_NOT_ZERO);
+OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_NOT_ZERO);
 /* This code runs only in 8 bit mode. No need to shift the value. */
 OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
 OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
@@ -2973,13 +3000,13 @@
 sljit_emit_fast_enter(compiler, RETURN_ADDR, 0);
 
 OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP2, 0, SLJIT_IMM, 0x20);
-jump = JUMP(SLJIT_C_NOT_ZERO);
+jump = JUMP(SLJIT_NOT_ZERO);
 /* Two byte sequence. */
 OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
 OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
 OP2(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_IMM, 0x1f);
 /* The upper 5 bits are known at this point. */
-compare = CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, 0x3);
+compare = CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, 0x3);
 OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, 6);
 OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x3f);
 OP2(SLJIT_OR, TMP2, 0, TMP2, 0, TMP1, 0);
@@ -3059,23 +3086,23 @@
     {
     mainloop = LABEL();
     OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
-    end = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+    end = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
     OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(-1));
     OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
-    CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff, mainloop);
-    CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff, mainloop);
+    CMPTO(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff, mainloop);
+    CMPTO(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff, mainloop);
     JUMPHERE(end);
     OP2(SLJIT_SUB, SLJIT_MEM1(SLJIT_SP), common->first_line_end, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
     }
   else
     {
-    end = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+    end = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
     mainloop = LABEL();
     /* Continual stores does not cause data dependency. */
     OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->first_line_end, STR_PTR, 0);
     read_char_range(common, common->nlmin, common->nlmax, TRUE);
     check_newlinechar(common, common->nltype, &newline, TRUE);
-    CMPTO(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0, mainloop);
+    CMPTO(SLJIT_LESS, STR_PTR, 0, STR_END, 0, mainloop);
     JUMPHERE(end);
     OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->first_line_end, STR_PTR, 0);
     set_jumps(newline, LABEL());
@@ -3090,10 +3117,10 @@
   {
   newlinelabel = LABEL();
   OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
-  end = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+  end = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
   OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
   OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, common->newline & 0xff);
-  OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+  OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
 #if defined COMPILE_PCRE16 || defined COMPILE_PCRE32
   OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, UCHAR_SHIFT);
 #endif
@@ -3113,14 +3140,14 @@
   OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
 
 if (newlinecheck)
-  CMPTO(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff, newlinelabel);
+  CMPTO(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff, newlinelabel);
 
 OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
 #if defined SUPPORT_UTF && !defined COMPILE_PCRE32
 #if defined COMPILE_PCRE8
 if (common->utf)
   {
-  singlechar = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
+  singlechar = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
   OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
   OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
   JUMPHERE(singlechar);
@@ -3128,10 +3155,10 @@
 #elif defined COMPILE_PCRE16
 if (common->utf)
   {
-  singlechar = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xd800);
+  singlechar = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xd800);
   OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0xfc00);
   OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xd800);
-  OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+  OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
   OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
   OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
   JUMPHERE(singlechar);
@@ -3530,9 +3557,6 @@
 sljit_ub *update_table = NULL;
 BOOL in_range;
 
-/* This is even TRUE, if both are NULL. */
-SLJIT_ASSERT(common->read_only_data_ptr == common->read_only_data);
-
 for (i = 0; i < MAX_N_CHARS; i++)
   {
   chars[i << 1] = NOTACHAR;
@@ -3581,18 +3605,9 @@
 
 if (range_right >= 0)
   {
-  /* Since no data is consumed (see the assert in the beginning
-  of this function), this space can be reallocated. */
-  if (common->read_only_data)
-    SLJIT_FREE(common->read_only_data);
-
-  common->read_only_data_size += 256;
-  common->read_only_data = (sljit_uw *)SLJIT_MALLOC(common->read_only_data_size);
-  if (common->read_only_data == NULL)
+  update_table = (sljit_ub *)allocate_read_only_data(common, 256);
+  if (update_table == NULL)
     return TRUE;
-
-  update_table = (sljit_ub *)common->read_only_data;
-  common->read_only_data_ptr = (sljit_uw *)(update_table + 256);
   memset(update_table, IN_UCHARS(range_len), 256);
 
   for (i = 0; i < range_len; i++)
@@ -3683,7 +3698,7 @@
   OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), common->first_line_end);
   OP1(SLJIT_MOV, TMP3, 0, STR_END, 0);
   OP2(SLJIT_SUB, STR_END, 0, STR_END, 0, SLJIT_IMM, IN_UCHARS(max));
-  quit = CMP(SLJIT_C_LESS_EQUAL, STR_END, 0, TMP1, 0);
+  quit = CMP(SLJIT_LESS_EQUAL, STR_END, 0, TMP1, 0);
   OP1(SLJIT_MOV, STR_END, 0, TMP1, 0);
   JUMPHERE(quit);
   }
@@ -3696,7 +3711,7 @@
 #endif
 
 start = LABEL();
-quit = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+quit = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
 
 SLJIT_ASSERT(range_right >= 0 || offsets[0] >= 0);
 
@@ -3714,7 +3729,7 @@
   OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)update_table);
 #endif
   OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
-  CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0, start);
+  CMPTO(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0, start);
   }
 
 if (offsets[0] >= 0)
@@ -3726,7 +3741,7 @@
 
   if (chars[1] != 0)
     OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, chars[1]);
-  CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, chars[0], start);
+  CMPTO(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, chars[0], start);
   if (offsets[2] >= 0)
     OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(offsets[2] - 1));
 
@@ -3734,14 +3749,14 @@
     {
     if (chars[5] != 0)
       OP2(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_IMM, chars[5]);
-    CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, chars[4], start);
+    CMPTO(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, chars[4], start);
     }
 
   if (offsets[2] >= 0)
     {
     if (chars[3] != 0)
       OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, chars[3]);
-    CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, chars[2], start);
+    CMPTO(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, chars[2], start);
     }
   OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
   }
@@ -3755,7 +3770,7 @@
   OP1(SLJIT_MOV, STR_END, 0, TMP3, 0);
   if (range_right >= 0)
     {
-    quit = CMP(SLJIT_C_LESS_EQUAL, STR_PTR, 0, TMP1, 0);
+    quit = CMP(SLJIT_LESS_EQUAL, STR_PTR, 0, TMP1, 0);
     OP1(SLJIT_MOV, STR_PTR, 0, TMP1, 0);
     JUMPHERE(quit);
     }
@@ -3784,7 +3799,7 @@
   }
 
 start = LABEL();
-quit = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+quit = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
 OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
 
 oc = first_char;
@@ -3797,22 +3812,22 @@
 #endif
   }
 if (first_char == oc)
-  found = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, first_char);
+  found = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, first_char);
 else
   {
   bit = first_char ^ oc;
   if (is_powerof2(bit))
     {
     OP2(SLJIT_OR, TMP2, 0, TMP1, 0, SLJIT_IMM, bit);
-    found = CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, first_char | bit);
+    found = CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, first_char | bit);
     }
   else
     {
     OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, first_char);
-    OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+    OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
     OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, oc);
-    OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
-    found = JUMP(SLJIT_C_NOT_ZERO);
+    OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
+    found = JUMP(SLJIT_NOT_ZERO);
     }
   }
 
@@ -3845,15 +3860,15 @@
 
 if (common->nltype == NLTYPE_FIXED && common->newline > 255)
   {
-  lastchar = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+  lastchar = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
   OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
   OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, str));
   OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, begin));
-  firstchar = CMP(SLJIT_C_LESS_EQUAL, STR_PTR, 0, TMP2, 0);
+  firstchar = CMP(SLJIT_LESS_EQUAL, STR_PTR, 0, TMP2, 0);
 
   OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, IN_UCHARS(2));
   OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, STR_PTR, 0, TMP1, 0);
-  OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_GREATER_EQUAL);
+  OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_GREATER_EQUAL);
 #if defined COMPILE_PCRE16 || defined COMPILE_PCRE32
   OP2(SLJIT_SHL, TMP2, 0, TMP2, 0, SLJIT_IMM, UCHAR_SHIFT);
 #endif
@@ -3861,11 +3876,11 @@
 
   loop = LABEL();
   OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
-  quit = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+  quit = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
   OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(-2));
   OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(-1));
-  CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff, loop);
-  CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff, loop);
+  CMPTO(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff, loop);
+  CMPTO(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff, loop);
 
   JUMPHERE(quit);
   JUMPHERE(firstchar);
@@ -3878,16 +3893,16 @@
 
 OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
 OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, str));
-firstchar = CMP(SLJIT_C_LESS_EQUAL, STR_PTR, 0, TMP2, 0);
+firstchar = CMP(SLJIT_LESS_EQUAL, STR_PTR, 0, TMP2, 0);
 skip_char_back(common);
 
 loop = LABEL();
 common->ff_newline_shortcut = loop;
 
 read_char_range(common, common->nlmin, common->nlmax, TRUE);
-lastchar = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+lastchar = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
 if (common->nltype == NLTYPE_ANY || common->nltype == NLTYPE_ANYCRLF)
-  foundcr = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
+  foundcr = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
 check_newlinechar(common, common->nltype, &newline, FALSE);
 set_jumps(newline, loop);
 
@@ -3895,10 +3910,10 @@
   {
   quit = JUMP(SLJIT_JUMP);
   JUMPHERE(foundcr);
-  notfoundnl = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+  notfoundnl = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
   OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
   OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, CHAR_NL);
-  OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+  OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
 #if defined COMPILE_PCRE16 || defined COMPILE_PCRE32
   OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, UCHAR_SHIFT);
 #endif
@@ -3934,7 +3949,7 @@
   }
 
 start = LABEL();
-quit = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+quit = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
 OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
 #ifdef SUPPORT_UTF
 if (common->utf)
@@ -3944,7 +3959,7 @@
 if (!check_class_ranges(common, start_bits, (start_bits[31] & 0x80) != 0, TRUE, &matches))
   {
 #ifndef COMPILE_PCRE8
-  jump = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 255);
+  jump = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 255);
   OP1(SLJIT_MOV, TMP1, 0, SLJIT_IMM, 255);
   JUMPHERE(jump);
 #endif
@@ -3953,7 +3968,7 @@
   OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)start_bits);
   OP2(SLJIT_SHL, TMP2, 0, SLJIT_IMM, 1, TMP2, 0);
   OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
-  found = JUMP(SLJIT_C_NOT_ZERO);
+  found = JUMP(SLJIT_NOT_ZERO);
   }
 
 #ifdef SUPPORT_UTF
@@ -3965,17 +3980,17 @@
 #if defined COMPILE_PCRE8
 if (common->utf)
   {
-  CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xc0, start);
+  CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xc0, start);
   OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
   OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
   }
 #elif defined COMPILE_PCRE16
 if (common->utf)
   {
-  CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xd800, start);
+  CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xd800, start);
   OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0xfc00);
   OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xd800);
-  OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+  OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
   OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
   OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
   }
@@ -4006,8 +4021,8 @@
 SLJIT_ASSERT(common->req_char_ptr != 0);
 OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(SLJIT_SP), common->req_char_ptr);
 OP2(SLJIT_ADD, TMP1, 0, STR_PTR, 0, SLJIT_IMM, REQ_BYTE_MAX);
-toolong = CMP(SLJIT_C_LESS, TMP1, 0, STR_END, 0);
-alreadyfound = CMP(SLJIT_C_LESS, STR_PTR, 0, TMP2, 0);
+toolong = CMP(SLJIT_LESS, TMP1, 0, STR_END, 0);
+alreadyfound = CMP(SLJIT_LESS, STR_PTR, 0, TMP2, 0);
 
 if (has_firstchar)
   OP2(SLJIT_ADD, TMP1, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
@@ -4015,7 +4030,7 @@
   OP1(SLJIT_MOV, TMP1, 0, STR_PTR, 0);
 
 loop = LABEL();
-notfound = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, STR_END, 0);
+notfound = CMP(SLJIT_GREATER_EQUAL, TMP1, 0, STR_END, 0);
 
 OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(TMP1), 0);
 oc = req_char;
@@ -4028,19 +4043,19 @@
 #endif
   }
 if (req_char == oc)
-  found = CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, req_char);
+  found = CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, req_char);
 else
   {
   bit = req_char ^ oc;
   if (is_powerof2(bit))
     {
     OP2(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_IMM, bit);
-    found = CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, req_char | bit);
+    found = CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, req_char | bit);
     }
   else
     {
-    found = CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, req_char);
-    foundoc = CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, oc);
+    found = CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, req_char);
+    foundoc = CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, oc);
     }
   }
 OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, IN_UCHARS(1));
@@ -4069,7 +4084,7 @@
 mainloop = LABEL();
 OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP1), 0);
 OP2(SLJIT_SUB | SLJIT_SET_S, SLJIT_UNUSED, 0, TMP2, 0, SLJIT_IMM, 0);
-jump = JUMP(SLJIT_C_SIG_LESS_EQUAL);
+jump = JUMP(SLJIT_SIG_LESS_EQUAL);
 
 OP2(SLJIT_ADD, TMP2, 0, TMP2, 0, TMP3, 0);
 OP1(SLJIT_MOV, SLJIT_MEM1(TMP2), 0, SLJIT_MEM1(TMP1), sizeof(sljit_sw));
@@ -4078,7 +4093,7 @@
 JUMPTO(SLJIT_JUMP, mainloop);
 
 JUMPHERE(jump);
-jump = JUMP(SLJIT_C_SIG_LESS);
+jump = JUMP(SLJIT_SIG_LESS);
 /* End of dropping frames. */
 sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
 
@@ -4106,7 +4121,7 @@
 OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
 OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, begin));
 OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS1, SLJIT_IMM, 0);
-skipread = CMP(SLJIT_C_LESS_EQUAL, STR_PTR, 0, TMP1, 0);
+skipread = CMP(SLJIT_LESS_EQUAL, STR_PTR, 0, TMP1, 0);
 skip_char_back(common);
 check_start_used_ptr(common);
 read_char(common);
@@ -4116,14 +4131,14 @@
 if (common->use_ucp)
   {
   OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, 1);
-  jump = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_UNDERSCORE);
+  jump = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_UNDERSCORE);
   add_jump(compiler, &common->getucd, JUMP(SLJIT_FAST_CALL));
   OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ucp_Ll);
   OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ucp_Lu - ucp_Ll);
-  OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+  OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
   OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ucp_Nd - ucp_Ll);
   OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ucp_No - ucp_Nd);
-  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
+  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
   JUMPHERE(jump);
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS1, TMP2, 0);
   }
@@ -4131,12 +4146,12 @@
 #endif
   {
 #ifndef COMPILE_PCRE8
-  jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+  jump = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
 #elif defined SUPPORT_UTF
   /* Here LOCALS1 has already been zeroed. */
   jump = NULL;
   if (common->utf)
-    jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+    jump = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
 #endif /* COMPILE_PCRE8 */
   OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), common->ctypes);
   OP2(SLJIT_LSHR, TMP1, 0, TMP1, 0, SLJIT_IMM, 4 /* ctype_word */);
@@ -4160,14 +4175,14 @@
 if (common->use_ucp)
   {
   OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, 1);
-  jump = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_UNDERSCORE);
+  jump = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_UNDERSCORE);
   add_jump(compiler, &common->getucd, JUMP(SLJIT_FAST_CALL));
   OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ucp_Ll);
   OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ucp_Lu - ucp_Ll);
-  OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+  OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
   OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ucp_Nd - ucp_Ll);
   OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ucp_No - ucp_Nd);
-  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
+  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
   JUMPHERE(jump);
   }
 else
@@ -4176,12 +4191,12 @@
 #ifndef COMPILE_PCRE8
   /* TMP2 may be destroyed by peek_char. */
   OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, 0);
-  jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+  jump = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
 #elif defined SUPPORT_UTF
   OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, 0);
   jump = NULL;
   if (common->utf)
-    jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+    jump = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
 #endif
   OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP1), common->ctypes);
   OP2(SLJIT_LSHR, TMP2, 0, TMP2, 0, SLJIT_IMM, 4 /* ctype_word */);
@@ -4256,41 +4271,41 @@
   return TRUE;
 
   case 1:
-  add_jump(compiler, backtracks, CMP(bit == 0 ? SLJIT_C_LESS : SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
+  add_jump(compiler, backtracks, CMP(bit == 0 ? SLJIT_LESS : SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
   return TRUE;
 
   case 2:
   if (ranges[0] + 1 != ranges[1])
     {
     OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[0]);
-    add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_C_LESS : SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
+    add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_LESS : SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
     }
   else
-    add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_C_EQUAL : SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
+    add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_EQUAL : SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
   return TRUE;
 
   case 3:
   if (bit != 0)
     {
-    add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2]));
+    add_jump(compiler, backtracks, CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2]));
     if (ranges[0] + 1 != ranges[1])
       {
       OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[0]);
-      add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
+      add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
       }
     else
-      add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
+      add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
     return TRUE;
     }
 
-  add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[0]));
+  add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, ranges[0]));
   if (ranges[1] + 1 != ranges[2])
     {
     OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[1]);
-    add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[2] - ranges[1]));
+    add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, ranges[2] - ranges[1]));
     }
   else
-    add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[1]));
+    add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[1]));
   return TRUE;
 
   case 4:
@@ -4302,10 +4317,10 @@
     if (ranges[2] + 1 != ranges[3])
       {
       OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[2]);
-      add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_C_LESS : SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[2]));
+      add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_LESS : SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[2]));
       }
     else
-      add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_C_EQUAL : SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2]));
+      add_jump(compiler, backtracks, CMP(bit != 0 ? SLJIT_EQUAL : SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2]));
     return TRUE;
     }
 
@@ -4315,31 +4330,31 @@
     if (ranges[0] + 1 != ranges[1])
       {
       OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[0]);
-      add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
+      add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
       i = ranges[0];
       }
     else
-      add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
+      add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[0]));
 
     if (ranges[2] + 1 != ranges[3])
       {
       OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[2] - i);
-      add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[2]));
+      add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[2]));
       }
     else
-      add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2] - i));
+      add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[2] - i));
     return TRUE;
     }
 
   OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[0]);
-  add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[0]));
+  add_jump(compiler, backtracks, CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, ranges[3] - ranges[0]));
   if (ranges[1] + 1 != ranges[2])
     {
     OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]);
-    add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, ranges[2] - ranges[1]));
+    add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, ranges[2] - ranges[1]));
     }
   else
-    add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
+    add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, ranges[1] - ranges[0]));
   return TRUE;
 
   default:
@@ -4357,21 +4372,21 @@
 
 OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x0a);
 OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x0d - 0x0a);
-OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
 OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x85 - 0x0a);
 #if defined SUPPORT_UTF || defined COMPILE_PCRE16 || defined COMPILE_PCRE32
 #ifdef COMPILE_PCRE8
 if (common->utf)
   {
 #endif
-  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
   OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x1);
   OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x2029 - 0x0a);
 #ifdef COMPILE_PCRE8
   }
 #endif
 #endif /* SUPPORT_UTF || COMPILE_PCRE16 || COMPILE_PCRE32 */
-OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
 sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
 }
 
@@ -4383,33 +4398,33 @@
 sljit_emit_fast_enter(compiler, RETURN_ADDR, 0);
 
 OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x09);
-OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
 OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x20);
-OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
 OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xa0);
 #if defined SUPPORT_UTF || defined COMPILE_PCRE16 || defined COMPILE_PCRE32
 #ifdef COMPILE_PCRE8
 if (common->utf)
   {
 #endif
-  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
   OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x1680);
-  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
   OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x180e);
-  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
   OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x2000);
   OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x200A - 0x2000);
-  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
+  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
   OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x202f - 0x2000);
-  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
   OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x205f - 0x2000);
-  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+  OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
   OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x3000 - 0x2000);
 #ifdef COMPILE_PCRE8
   }
 #endif
 #endif /* SUPPORT_UTF || COMPILE_PCRE16 || COMPILE_PCRE32 */
-OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
 
 sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
 }
@@ -4423,21 +4438,21 @@
 
 OP2(SLJIT_SUB, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x0a);
 OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x0d - 0x0a);
-OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
 OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x85 - 0x0a);
 #if defined SUPPORT_UTF || defined COMPILE_PCRE16 || defined COMPILE_PCRE32
 #ifdef COMPILE_PCRE8
 if (common->utf)
   {
 #endif
-  OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+  OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
   OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, 0x1);
   OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x2029 - 0x0a);
 #ifdef COMPILE_PCRE8
   }
 #endif
 #endif /* SUPPORT_UTF || COMPILE_PCRE16 || COMPILE_PCRE32 */
-OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
 
 sljit_emit_fast_return(compiler, RETURN_ADDR, 0);
 }
@@ -4461,9 +4476,9 @@
 label = LABEL();
 OP1(MOVU_UCHAR, CHAR1, 0, SLJIT_MEM1(TMP1), IN_UCHARS(1));
 OP1(MOVU_UCHAR, CHAR2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
-jump = CMP(SLJIT_C_NOT_EQUAL, CHAR1, 0, CHAR2, 0);
+jump = CMP(SLJIT_NOT_EQUAL, CHAR1, 0, CHAR2, 0);
 OP2(SLJIT_SUB | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_IMM, IN_UCHARS(1));
-JUMPTO(SLJIT_C_NOT_ZERO, label);
+JUMPTO(SLJIT_NOT_ZERO, label);
 
 JUMPHERE(jump);
 OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
@@ -4494,20 +4509,20 @@
 OP1(MOVU_UCHAR, CHAR1, 0, SLJIT_MEM1(TMP1), IN_UCHARS(1));
 OP1(MOVU_UCHAR, CHAR2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
 #ifndef COMPILE_PCRE8
-jump = CMP(SLJIT_C_GREATER, CHAR1, 0, SLJIT_IMM, 255);
+jump = CMP(SLJIT_GREATER, CHAR1, 0, SLJIT_IMM, 255);
 #endif
 OP1(SLJIT_MOV_UB, CHAR1, 0, SLJIT_MEM2(LCC_TABLE, CHAR1), 0);
 #ifndef COMPILE_PCRE8
 JUMPHERE(jump);
-jump = CMP(SLJIT_C_GREATER, CHAR2, 0, SLJIT_IMM, 255);
+jump = CMP(SLJIT_GREATER, CHAR2, 0, SLJIT_IMM, 255);
 #endif
 OP1(SLJIT_MOV_UB, CHAR2, 0, SLJIT_MEM2(LCC_TABLE, CHAR2), 0);
 #ifndef COMPILE_PCRE8
 JUMPHERE(jump);
 #endif
-jump = CMP(SLJIT_C_NOT_EQUAL, CHAR1, 0, CHAR2, 0);
+jump = CMP(SLJIT_NOT_EQUAL, CHAR1, 0, CHAR2, 0);
 OP2(SLJIT_SUB | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_IMM, IN_UCHARS(1));
-JUMPTO(SLJIT_C_NOT_ZERO, label);
+JUMPTO(SLJIT_NOT_ZERO, label);
 
 JUMPHERE(jump);
 OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
@@ -4555,7 +4570,7 @@
 #endif /* SUPPORT_UTF && SUPPORT_UCP */
 
 static pcre_uchar *byte_sequence_compare(compiler_common *common, BOOL caseless, pcre_uchar *cc,
-    compare_context* context, jump_list **backtracks)
+    compare_context *context, jump_list **backtracks)
 {
 DEFINE_COMPILER;
 unsigned int othercasebit = 0;
@@ -4655,20 +4670,20 @@
       case 4 / sizeof(pcre_uchar):
       if (context->oc.asint != 0)
         OP2(SLJIT_OR, context->sourcereg, 0, context->sourcereg, 0, SLJIT_IMM, context->oc.asint);
-      add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, context->c.asint | context->oc.asint));
+      add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, context->c.asint | context->oc.asint));
       break;
 
       case 2 / sizeof(pcre_uchar):
       if (context->oc.asushort != 0)
         OP2(SLJIT_OR, context->sourcereg, 0, context->sourcereg, 0, SLJIT_IMM, context->oc.asushort);
-      add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, context->c.asushort | context->oc.asushort));
+      add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, context->c.asushort | context->oc.asushort));
       break;
 
 #ifdef COMPILE_PCRE8
       case 1:
       if (context->oc.asbyte != 0)
         OP2(SLJIT_OR, context->sourcereg, 0, context->sourcereg, 0, SLJIT_IMM, context->oc.asbyte);
-      add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, context->c.asbyte | context->oc.asbyte));
+      add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, context->c.asbyte | context->oc.asbyte));
       break;
 #endif
 
@@ -4690,10 +4705,10 @@
   if (othercasebit != 0 && othercasechar == cc)
     {
     OP2(SLJIT_OR, context->sourcereg, 0, context->sourcereg, 0, SLJIT_IMM, othercasebit);
-    add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, *cc | othercasebit));
+    add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, *cc | othercasebit));
     }
   else
-    add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, *cc));
+    add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, context->sourcereg, 0, SLJIT_IMM, *cc));
 
 #endif
 
@@ -4854,7 +4869,7 @@
   {
   if ((cc[-1] & XCL_MAP) != 0)
     {
-    jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+    jump = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
     if (!check_class_ranges(common, (const pcre_uint8 *)cc, (((const pcre_uint8 *)cc)[31] & 0x80) != 0, TRUE, &found))
       {
       OP2(SLJIT_AND, TMP2, 0, TMP1, 0, SLJIT_IMM, 0x7);
@@ -4862,7 +4877,7 @@
       OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)cc);
       OP2(SLJIT_SHL, TMP2, 0, SLJIT_IMM, 1, TMP2, 0);
       OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
-      add_jump(compiler, &found, JUMP(SLJIT_C_NOT_ZERO));
+      add_jump(compiler, &found, JUMP(SLJIT_NOT_ZERO));
       }
 
     add_jump(compiler, backtracks, JUMP(SLJIT_JUMP));
@@ -4873,7 +4888,7 @@
   else
     {
     OP2(SLJIT_SUB, TMP2, 0, TMP1, 0, SLJIT_IMM, min);
-    add_jump(compiler, (cc[-1] & XCL_NOT) == 0 ? backtracks : &found, CMP(SLJIT_C_GREATER, TMP2, 0, SLJIT_IMM, max - min));
+    add_jump(compiler, (cc[-1] & XCL_NOT) == 0 ? backtracks : &found, CMP(SLJIT_GREATER, TMP2, 0, SLJIT_IMM, max - min));
     }
   }
 else if ((cc[-1] & XCL_MAP) != 0)
@@ -4887,14 +4902,14 @@
 #ifdef COMPILE_PCRE8
     SLJIT_ASSERT(common->utf);
 #endif
-    jump = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+    jump = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
 
     OP2(SLJIT_AND, TMP2, 0, TMP1, 0, SLJIT_IMM, 0x7);
     OP2(SLJIT_LSHR, TMP1, 0, TMP1, 0, SLJIT_IMM, 3);
     OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)cc);
     OP2(SLJIT_SHL, TMP2, 0, SLJIT_IMM, 1, TMP2, 0);
     OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
-    add_jump(compiler, list, JUMP(SLJIT_C_NOT_ZERO));
+    add_jump(compiler, list, JUMP(SLJIT_NOT_ZERO));
 
     JUMPHERE(jump);
     }
@@ -4964,19 +4979,19 @@
     if (numberofcmps < 3 && (*cc == XCL_SINGLE || *cc == XCL_RANGE))
       {
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
-      OP_FLAGS(numberofcmps == 0 ? SLJIT_MOV : SLJIT_OR, TMP2, 0, numberofcmps == 0 ? SLJIT_UNUSED : TMP2, 0, SLJIT_C_EQUAL);
+      OP_FLAGS(numberofcmps == 0 ? SLJIT_MOV : SLJIT_OR, TMP2, 0, numberofcmps == 0 ? SLJIT_UNUSED : TMP2, 0, SLJIT_EQUAL);
       numberofcmps++;
       }
     else if (numberofcmps > 0)
       {
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
-      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
-      jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
+      jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
       numberofcmps = 0;
       }
     else
       {
-      jump = CMP(SLJIT_C_EQUAL ^ invertcmp, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
+      jump = CMP(SLJIT_EQUAL ^ invertcmp, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
       numberofcmps = 0;
       }
     }
@@ -4990,19 +5005,19 @@
     if (numberofcmps < 3 && (*cc == XCL_SINGLE || *cc == XCL_RANGE))
       {
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
-      OP_FLAGS(numberofcmps == 0 ? SLJIT_MOV : SLJIT_OR, TMP2, 0, numberofcmps == 0 ? SLJIT_UNUSED : TMP2, 0, SLJIT_C_LESS_EQUAL);
+      OP_FLAGS(numberofcmps == 0 ? SLJIT_MOV : SLJIT_OR, TMP2, 0, numberofcmps == 0 ? SLJIT_UNUSED : TMP2, 0, SLJIT_LESS_EQUAL);
       numberofcmps++;
       }
     else if (numberofcmps > 0)
       {
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
-      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
-      jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
+      jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
       numberofcmps = 0;
       }
     else
       {
-      jump = CMP(SLJIT_C_LESS_EQUAL ^ invertcmp, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
+      jump = CMP(SLJIT_LESS_EQUAL ^ invertcmp, TMP1, 0, SLJIT_IMM, (sljit_sw)(c - charoffset));
       numberofcmps = 0;
       }
     }
@@ -5027,59 +5042,59 @@
 
       case PT_LAMP:
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_Lu - typeoffset);
-      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_Ll - typeoffset);
-      OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+      OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_Lt - typeoffset);
-      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
-      jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
+      jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
       break;
 
       case PT_GC:
       c = PRIV(ucp_typerange)[(int)cc[1] * 2];
       SET_TYPE_OFFSET(c);
-      jump = CMP(SLJIT_C_LESS_EQUAL ^ invertcmp, typereg, 0, SLJIT_IMM, PRIV(ucp_typerange)[(int)cc[1] * 2 + 1] - c);
+      jump = CMP(SLJIT_LESS_EQUAL ^ invertcmp, typereg, 0, SLJIT_IMM, PRIV(ucp_typerange)[(int)cc[1] * 2 + 1] - c);
       break;
 
       case PT_PC:
-      jump = CMP(SLJIT_C_EQUAL ^ invertcmp, typereg, 0, SLJIT_IMM, (int)cc[1] - typeoffset);
+      jump = CMP(SLJIT_EQUAL ^ invertcmp, typereg, 0, SLJIT_IMM, (int)cc[1] - typeoffset);
       break;
 
       case PT_SC:
-      jump = CMP(SLJIT_C_EQUAL ^ invertcmp, scriptreg, 0, SLJIT_IMM, (int)cc[1]);
+      jump = CMP(SLJIT_EQUAL ^ invertcmp, scriptreg, 0, SLJIT_IMM, (int)cc[1]);
       break;
 
       case PT_SPACE:
       case PT_PXSPACE:
       SET_CHAR_OFFSET(9);
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xd - 0x9);
-      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
 
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x85 - 0x9);
-      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
 
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x180e - 0x9);
-      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
 
       SET_TYPE_OFFSET(ucp_Zl);
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_Zs - ucp_Zl);
-      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
-      jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
+      jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
       break;
 
       case PT_WORD:
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(CHAR_UNDERSCORE - charoffset));
-      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
       /* Fall through. */
 
       case PT_ALNUM:
       SET_TYPE_OFFSET(ucp_Ll);
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_Lu - ucp_Ll);
-      OP_FLAGS((*cc == PT_ALNUM) ? SLJIT_MOV : SLJIT_OR, TMP2, 0, (*cc == PT_ALNUM) ? SLJIT_UNUSED : TMP2, 0, SLJIT_C_LESS_EQUAL);
+      OP_FLAGS((*cc == PT_ALNUM) ? SLJIT_MOV : SLJIT_OR, TMP2, 0, (*cc == PT_ALNUM) ? SLJIT_UNUSED : TMP2, 0, SLJIT_LESS_EQUAL);
       SET_TYPE_OFFSET(ucp_Nd);
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_No - ucp_Nd);
-      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
-      jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
+      jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
       break;
 
       case PT_CLIST:
@@ -5101,7 +5116,7 @@
           OP2(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_IMM, other_cases[1] ^ other_cases[0]);
           }
         OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP2, 0, SLJIT_IMM, other_cases[1]);
-        OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+        OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
         other_cases += 2;
         }
       else if (is_powerof2(other_cases[2] ^ other_cases[1]))
@@ -5114,103 +5129,103 @@
           OP2(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_IMM, other_cases[1] ^ other_cases[0]);
           }
         OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP2, 0, SLJIT_IMM, other_cases[2]);
-        OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+        OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
 
         OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(other_cases[0] - charoffset));
-        OP_FLAGS(SLJIT_OR | ((other_cases[3] == NOTACHAR) ? SLJIT_SET_E : 0), TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+        OP_FLAGS(SLJIT_OR | ((other_cases[3] == NOTACHAR) ? SLJIT_SET_E : 0), TMP2, 0, TMP2, 0, SLJIT_EQUAL);
 
         other_cases += 3;
         }
       else
         {
         OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(*other_cases++ - charoffset));
-        OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+        OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
         }
 
       while (*other_cases != NOTACHAR)
         {
         OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(*other_cases++ - charoffset));
-        OP_FLAGS(SLJIT_OR | ((*other_cases == NOTACHAR) ? SLJIT_SET_E : 0), TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+        OP_FLAGS(SLJIT_OR | ((*other_cases == NOTACHAR) ? SLJIT_SET_E : 0), TMP2, 0, TMP2, 0, SLJIT_EQUAL);
         }
-      jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+      jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
       break;
 
       case PT_UCNC:
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(CHAR_DOLLAR_SIGN - charoffset));
-      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(CHAR_COMMERCIAL_AT - charoffset));
-      OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+      OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(CHAR_GRAVE_ACCENT - charoffset));
-      OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+      OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
 
       SET_CHAR_OFFSET(0xa0);
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (sljit_sw)(0xd7ff - charoffset));
-      OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
+      OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
       SET_CHAR_OFFSET(0);
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xe000 - 0);
-      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_GREATER_EQUAL);
-      jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_GREATER_EQUAL);
+      jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
       break;
 
       case PT_PXGRAPH:
       /* C and Z groups are the farthest two groups. */
       SET_TYPE_OFFSET(ucp_Ll);
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_So - ucp_Ll);
-      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_GREATER);
+      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_GREATER);
 
-      jump = CMP(SLJIT_C_NOT_EQUAL, typereg, 0, SLJIT_IMM, ucp_Cf - ucp_Ll);
+      jump = CMP(SLJIT_NOT_EQUAL, typereg, 0, SLJIT_IMM, ucp_Cf - ucp_Ll);
 
       /* In case of ucp_Cf, we overwrite the result. */
       SET_CHAR_OFFSET(0x2066);
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x2069 - 0x2066);
-      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
 
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x061c - 0x2066);
-      OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+      OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
 
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x180e - 0x2066);
-      OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+      OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
 
       JUMPHERE(jump);
-      jump = CMP(SLJIT_C_ZERO ^ invertcmp, TMP2, 0, SLJIT_IMM, 0);
+      jump = CMP(SLJIT_ZERO ^ invertcmp, TMP2, 0, SLJIT_IMM, 0);
       break;
 
       case PT_PXPRINT:
       /* C and Z groups are the farthest two groups. */
       SET_TYPE_OFFSET(ucp_Ll);
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_So - ucp_Ll);
-      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_GREATER);
+      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_GREATER);
 
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_Zs - ucp_Ll);
-      OP_FLAGS(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_C_NOT_EQUAL);
+      OP_FLAGS(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_NOT_EQUAL);
 
-      jump = CMP(SLJIT_C_NOT_EQUAL, typereg, 0, SLJIT_IMM, ucp_Cf - ucp_Ll);
+      jump = CMP(SLJIT_NOT_EQUAL, typereg, 0, SLJIT_IMM, ucp_Cf - ucp_Ll);
 
       /* In case of ucp_Cf, we overwrite the result. */
       SET_CHAR_OFFSET(0x2066);
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x2069 - 0x2066);
-      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
 
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0x061c - 0x2066);
-      OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_C_EQUAL);
+      OP_FLAGS(SLJIT_OR, TMP2, 0, TMP2, 0, SLJIT_EQUAL);
 
       JUMPHERE(jump);
-      jump = CMP(SLJIT_C_ZERO ^ invertcmp, TMP2, 0, SLJIT_IMM, 0);
+      jump = CMP(SLJIT_ZERO ^ invertcmp, TMP2, 0, SLJIT_IMM, 0);
       break;
 
       case PT_PXPUNCT:
       SET_TYPE_OFFSET(ucp_Sc);
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_So - ucp_Sc);
-      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS_EQUAL);
+      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS_EQUAL);
 
       SET_CHAR_OFFSET(0);
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xff);
-      OP_FLAGS(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
+      OP_FLAGS(SLJIT_AND, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
 
       SET_TYPE_OFFSET(ucp_Pc);
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, typereg, 0, SLJIT_IMM, ucp_Ps - ucp_Pc);
-      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_LESS_EQUAL);
-      jump = JUMP(SLJIT_C_NOT_ZERO ^ invertcmp);
+      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_LESS_EQUAL);
+      jump = JUMP(SLJIT_NOT_ZERO ^ invertcmp);
       break;
       }
     cc += 2;
@@ -5250,19 +5265,19 @@
   case OP_SOD:
   OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
   OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, begin));
-  add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, STR_PTR, 0, TMP1, 0));
+  add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, TMP1, 0));
   return cc;
 
   case OP_SOM:
   OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
   OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, str));
-  add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, STR_PTR, 0, TMP1, 0));
+  add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, TMP1, 0));
   return cc;
 
   case OP_NOT_WORD_BOUNDARY:
   case OP_WORD_BOUNDARY:
   add_jump(compiler, &common->wordboundary, JUMP(SLJIT_FAST_CALL));
-  add_jump(compiler, backtracks, JUMP(type == OP_NOT_WORD_BOUNDARY ? SLJIT_C_NOT_ZERO : SLJIT_C_ZERO));
+  add_jump(compiler, backtracks, JUMP(type == OP_NOT_WORD_BOUNDARY ? SLJIT_NOT_ZERO : SLJIT_ZERO));
   return cc;
 
   case OP_NOT_DIGIT:
@@ -5277,7 +5292,7 @@
     read_char8_type(common, type == OP_NOT_DIGIT);
     /* Flip the starting bit in the negative case. */
   OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ctype_digit);
-  add_jump(compiler, backtracks, JUMP(type == OP_DIGIT ? SLJIT_C_ZERO : SLJIT_C_NOT_ZERO));
+  add_jump(compiler, backtracks, JUMP(type == OP_DIGIT ? SLJIT_ZERO : SLJIT_NOT_ZERO));
   return cc;
 
   case OP_NOT_WHITESPACE:
@@ -5290,7 +5305,7 @@
 #endif
     read_char8_type(common, type == OP_NOT_WHITESPACE);
   OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ctype_space);
-  add_jump(compiler, backtracks, JUMP(type == OP_WHITESPACE ? SLJIT_C_ZERO : SLJIT_C_NOT_ZERO));
+  add_jump(compiler, backtracks, JUMP(type == OP_WHITESPACE ? SLJIT_ZERO : SLJIT_NOT_ZERO));
   return cc;
 
   case OP_NOT_WORDCHAR:
@@ -5303,7 +5318,7 @@
 #endif
     read_char8_type(common, type == OP_NOT_WORDCHAR);
   OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, ctype_word);
-  add_jump(compiler, backtracks, JUMP(type == OP_WORDCHAR ? SLJIT_C_ZERO : SLJIT_C_NOT_ZERO));
+  add_jump(compiler, backtracks, JUMP(type == OP_WORDCHAR ? SLJIT_ZERO : SLJIT_NOT_ZERO));
   return cc;
 
   case OP_ANY:
@@ -5311,15 +5326,15 @@
   read_char_range(common, common->nlmin, common->nlmax, TRUE);
   if (common->nltype == NLTYPE_FIXED && common->newline > 255)
     {
-    jump[0] = CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff);
+    jump[0] = CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff);
     end_list = NULL;
     if (common->mode != JIT_PARTIAL_HARD_COMPILE)
-      add_jump(compiler, &end_list, CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
+      add_jump(compiler, &end_list, CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
     else
       check_str_end(common, &end_list);
 
     OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
-    add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, common->newline & 0xff));
+    add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, common->newline & 0xff));
     set_jumps(end_list, LABEL());
     JUMPHERE(jump[0]);
     }
@@ -5336,14 +5351,14 @@
     OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
 #if defined COMPILE_PCRE8 || defined COMPILE_PCRE16
 #if defined COMPILE_PCRE8
-    jump[0] = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
+    jump[0] = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
     OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
     OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
 #elif defined COMPILE_PCRE16
-    jump[0] = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xd800);
+    jump[0] = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xd800);
     OP2(SLJIT_AND, TMP1, 0, TMP1, 0, SLJIT_IMM, 0xfc00);
     OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, 0xd800);
-    OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_C_EQUAL);
+    OP_FLAGS(SLJIT_MOV, TMP1, 0, SLJIT_UNUSED, 0, SLJIT_EQUAL);
     OP2(SLJIT_SHL, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
     OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
 #endif
@@ -5377,15 +5392,15 @@
   case OP_ANYNL:
   detect_partial_match(common, backtracks);
   read_char_range(common, common->bsr_nlmin, common->bsr_nlmax, FALSE);
-  jump[0] = CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
+  jump[0] = CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
   /* We don't need to handle soft partial matching case. */
   end_list = NULL;
   if (common->mode != JIT_PARTIAL_HARD_COMPILE)
-    add_jump(compiler, &end_list, CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
+    add_jump(compiler, &end_list, CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
   else
     check_str_end(common, &end_list);
   OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
-  jump[1] = CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL);
+  jump[1] = CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL);
   OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
   jump[2] = JUMP(SLJIT_JUMP);
   JUMPHERE(jump[0]);
@@ -5400,7 +5415,7 @@
   detect_partial_match(common, backtracks);
   read_char_range(common, 0x9, 0x3000, type == OP_NOT_HSPACE);
   add_jump(compiler, &common->hspace, JUMP(SLJIT_FAST_CALL));
-  add_jump(compiler, backtracks, JUMP(type == OP_NOT_HSPACE ? SLJIT_C_NOT_ZERO : SLJIT_C_ZERO));
+  add_jump(compiler, backtracks, JUMP(type == OP_NOT_HSPACE ? SLJIT_NOT_ZERO : SLJIT_ZERO));
   return cc;
 
   case OP_NOT_VSPACE:
@@ -5408,7 +5423,7 @@
   detect_partial_match(common, backtracks);
   read_char_range(common, 0xa, 0x2029, type == OP_NOT_VSPACE);
   add_jump(compiler, &common->vspace, JUMP(SLJIT_FAST_CALL));
-  add_jump(compiler, backtracks, JUMP(type == OP_NOT_VSPACE ? SLJIT_C_NOT_ZERO : SLJIT_C_ZERO));
+  add_jump(compiler, backtracks, JUMP(type == OP_NOT_VSPACE ? SLJIT_NOT_ZERO : SLJIT_ZERO));
   return cc;
 
 #ifdef SUPPORT_UCP
@@ -5422,7 +5437,7 @@
   OP1(SLJIT_MOV_UB, STACK_TOP, 0, SLJIT_MEM2(TMP1, TMP2), 3);
 
   label = LABEL();
-  jump[0] = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+  jump[0] = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
   OP1(SLJIT_MOV, TMP3, 0, STR_PTR, 0);
   read_char(common);
   add_jump(compiler, &common->getucd, JUMP(SLJIT_FAST_CALL));
@@ -5434,7 +5449,7 @@
   OP1(SLJIT_MOV, STACK_TOP, 0, TMP2, 0);
   OP2(SLJIT_SHL, TMP2, 0, SLJIT_IMM, 1, TMP2, 0);
   OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
-  JUMPTO(SLJIT_C_NOT_ZERO, label);
+  JUMPTO(SLJIT_NOT_ZERO, label);
 
   OP1(SLJIT_MOV, STR_PTR, 0, TMP3, 0);
   JUMPHERE(jump[0]);
@@ -5442,7 +5457,7 @@
 
   if (common->mode == JIT_PARTIAL_HARD_COMPILE)
     {
-    jump[0] = CMP(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0);
+    jump[0] = CMP(SLJIT_LESS, STR_PTR, 0, STR_END, 0);
     /* Since we successfully read a char above, partial matching must occure. */
     check_partial(common, TRUE);
     JUMPHERE(jump[0]);
@@ -5452,63 +5467,63 @@
 
   case OP_EODN:
   /* Requires rather complex checks. */
-  jump[0] = CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
+  jump[0] = CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0);
   if (common->nltype == NLTYPE_FIXED && common->newline > 255)
     {
     OP2(SLJIT_ADD, TMP2, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(2));
     OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
     if (common->mode == JIT_COMPILE)
-      add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, STR_END, 0));
+      add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, STR_END, 0));
     else
       {
-      jump[1] = CMP(SLJIT_C_EQUAL, TMP2, 0, STR_END, 0);
+      jump[1] = CMP(SLJIT_EQUAL, TMP2, 0, STR_END, 0);
       OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP2, 0, STR_END, 0);
-      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_C_LESS);
+      OP_FLAGS(SLJIT_MOV, TMP2, 0, SLJIT_UNUSED, 0, SLJIT_LESS);
       OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff);
-      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_C_NOT_EQUAL);
-      add_jump(compiler, backtracks, JUMP(SLJIT_C_NOT_EQUAL));
+      OP_FLAGS(SLJIT_OR | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_NOT_EQUAL);
+      add_jump(compiler, backtracks, JUMP(SLJIT_NOT_EQUAL));
       check_partial(common, TRUE);
       add_jump(compiler, backtracks, JUMP(SLJIT_JUMP));
       JUMPHERE(jump[1]);
       }
     OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
-    add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
-    add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff));
+    add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
+    add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff));
     }
   else if (common->nltype == NLTYPE_FIXED)
     {
     OP2(SLJIT_ADD, TMP2, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
     OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
-    add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, STR_END, 0));
-    add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, common->newline));
+    add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, STR_END, 0));
+    add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, common->newline));
     }
   else
     {
     OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
-    jump[1] = CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
+    jump[1] = CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_CR);
     OP2(SLJIT_ADD, TMP2, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(2));
     OP2(SLJIT_SUB | SLJIT_SET_U, SLJIT_UNUSED, 0, TMP2, 0, STR_END, 0);
-    jump[2] = JUMP(SLJIT_C_GREATER);
-    add_jump(compiler, backtracks, JUMP(SLJIT_C_LESS));
+    jump[2] = JUMP(SLJIT_GREATER);
+    add_jump(compiler, backtracks, JUMP(SLJIT_LESS));
     /* Equal. */
     OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
-    jump[3] = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL);
+    jump[3] = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL);
     add_jump(compiler, backtracks, JUMP(SLJIT_JUMP));
 
     JUMPHERE(jump[1]);
     if (common->nltype == NLTYPE_ANYCRLF)
       {
       OP2(SLJIT_ADD, TMP2, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
-      add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP2, 0, STR_END, 0));
-      add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL));
+      add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP2, 0, STR_END, 0));
+      add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, CHAR_NL));
       }
     else
       {
       OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS1, STR_PTR, 0);
       read_char_range(common, common->nlmin, common->nlmax, TRUE);
-      add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, STR_PTR, 0, STR_END, 0));
+      add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, STR_END, 0));
       add_jump(compiler, &common->anynewline, JUMP(SLJIT_FAST_CALL));
-      add_jump(compiler, backtracks, JUMP(SLJIT_C_ZERO));
+      add_jump(compiler, backtracks, JUMP(SLJIT_ZERO));
       OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), LOCALS1);
       }
     JUMPHERE(jump[2]);
@@ -5519,36 +5534,36 @@
   return cc;
 
   case OP_EOD:
-  add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0));
+  add_jump(compiler, backtracks, CMP(SLJIT_LESS, STR_PTR, 0, STR_END, 0));
   check_partial(common, FALSE);
   return cc;
 
   case OP_CIRC:
   OP1(SLJIT_MOV, TMP2, 0, ARGUMENTS, 0);
   OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(jit_arguments, begin));
-  add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER, STR_PTR, 0, TMP1, 0));
+  add_jump(compiler, backtracks, CMP(SLJIT_GREATER, STR_PTR, 0, TMP1, 0));
   OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(jit_arguments, notbol));
-  add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+  add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
   return cc;
 
   case OP_CIRCM:
   OP1(SLJIT_MOV, TMP2, 0, ARGUMENTS, 0);
   OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(jit_arguments, begin));
-  jump[1] = CMP(SLJIT_C_GREATER, STR_PTR, 0, TMP1, 0);
+  jump[1] = CMP(SLJIT_GREATER, STR_PTR, 0, TMP1, 0);
   OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(jit_arguments, notbol));
-  add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+  add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
   jump[0] = JUMP(SLJIT_JUMP);
   JUMPHERE(jump[1]);
 
-  add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
+  add_jump(compiler, backtracks, CMP(SLJIT_GREATER_EQUAL, STR_PTR, 0, STR_END, 0));
   if (common->nltype == NLTYPE_FIXED && common->newline > 255)
     {
     OP2(SLJIT_SUB, TMP2, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(2));
-    add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, TMP2, 0, TMP1, 0));
+    add_jump(compiler, backtracks, CMP(SLJIT_LESS, TMP2, 0, TMP1, 0));
     OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(-2));
     OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(-1));
-    add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
-    add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff));
+    add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
+    add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff));
     }
   else
     {
@@ -5562,22 +5577,22 @@
   case OP_DOLL:
   OP1(SLJIT_MOV, TMP2, 0, ARGUMENTS, 0);
   OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(jit_arguments, noteol));
-  add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+  add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
 
   if (!common->endonly)
     compile_char1_matchingpath(common, OP_EODN, cc, backtracks);
   else
     {
-    add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0));
+    add_jump(compiler, backtracks, CMP(SLJIT_LESS, STR_PTR, 0, STR_END, 0));
     check_partial(common, FALSE);
     }
   return cc;
 
   case OP_DOLLM:
-  jump[1] = CMP(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0);
+  jump[1] = CMP(SLJIT_LESS, STR_PTR, 0, STR_END, 0);
   OP1(SLJIT_MOV, TMP2, 0, ARGUMENTS, 0);
   OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP2), SLJIT_OFFSETOF(jit_arguments, noteol));
-  add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+  add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
   check_partial(common, FALSE);
   jump[0] = JUMP(SLJIT_JUMP);
   JUMPHERE(jump[1]);
@@ -5587,20 +5602,20 @@
     OP2(SLJIT_ADD, TMP2, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(2));
     OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(0));
     if (common->mode == JIT_COMPILE)
-      add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER, TMP2, 0, STR_END, 0));
+      add_jump(compiler, backtracks, CMP(SLJIT_GREATER, TMP2, 0, STR_END, 0));
     else
       {
-      jump[1] = CMP(SLJIT_C_LESS_EQUAL, TMP2, 0, STR_END, 0);
+      jump[1] = CMP(SLJIT_LESS_EQUAL, TMP2, 0, STR_END, 0);
       /* STR_PTR = STR_END - IN_UCHARS(1) */
-      add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
+      add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
       check_partial(common, TRUE);
       add_jump(compiler, backtracks, JUMP(SLJIT_JUMP));
       JUMPHERE(jump[1]);
       }
 
     OP1(MOV_UCHAR, TMP2, 0, SLJIT_MEM1(STR_PTR), IN_UCHARS(1));
-    add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
-    add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff));
+    add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, (common->newline >> 8) & 0xff));
+    add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, common->newline & 0xff));
     }
   else
     {
@@ -5619,7 +5634,7 @@
   if (common->mode == JIT_COMPILE && (type == OP_CHAR || !char_has_othercase(common, cc) || char_get_othercase_bit(common, cc) != 0))
     {
     OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(length));
-    add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER, STR_PTR, 0, STR_END, 0));
+    add_jump(compiler, backtracks, CMP(SLJIT_GREATER, STR_PTR, 0, STR_END, 0));
 
     context.length = IN_UCHARS(length);
     context.sourcereg = -1;
@@ -5642,7 +5657,7 @@
   if (type == OP_CHAR || !char_has_othercase(common, cc))
     {
     read_char_range(common, c, c, FALSE);
-    add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, c));
+    add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, c));
     return cc + length;
     }
   oc = char_othercase(common, c);
@@ -5651,11 +5666,11 @@
   if (is_powerof2(bit))
     {
     OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, bit);
-    add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, c | bit));
+    add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, c | bit));
     return cc + length;
     }
-  jump[0] = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, c);
-  add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, oc));
+  jump[0] = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, c);
+  add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, oc));
   JUMPHERE(jump[0]);
   return cc + length;
 
@@ -5672,16 +5687,16 @@
       {
       OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(STR_PTR), 0);
       if (type == OP_NOT || !char_has_othercase(common, cc))
-        add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, c));
+        add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, c));
       else
         {
         /* Since UTF8 code page is fixed, we know that c is in [a-z] or [A-Z] range. */
         OP2(SLJIT_OR, TMP2, 0, TMP1, 0, SLJIT_IMM, 0x20);
-        add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, c | 0x20));
+        add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, c | 0x20));
         }
       /* Skip the variable-length character. */
       OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(1));
-      jump[0] = CMP(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
+      jump[0] = CMP(SLJIT_LESS, TMP1, 0, SLJIT_IMM, 0xc0);
       OP1(MOV_UCHAR, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)PRIV(utf8_table4) - 0xc0);
       OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP1, 0);
       JUMPHERE(jump[0]);
@@ -5700,7 +5715,7 @@
   if (type == OP_NOT || !char_has_othercase(common, cc))
     {
     read_char_range(common, c, c, TRUE);
-    add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, c));
+    add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, c));
     }
   else
     {
@@ -5710,12 +5725,12 @@
     if (is_powerof2(bit))
       {
       OP2(SLJIT_OR, TMP1, 0, TMP1, 0, SLJIT_IMM, bit);
-      add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, c | bit));
+      add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, c | bit));
       }
     else
       {
-      add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, c));
-      add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, oc));
+      add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, c));
+      add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, oc));
       }
     }
   return cc + length;
@@ -5738,7 +5753,7 @@
   jump[0] = NULL;
   if (common->utf)
     {
-    jump[0] = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, bit);
+    jump[0] = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, bit);
     if (type == OP_CLASS)
       {
       add_jump(compiler, backtracks, jump[0]);
@@ -5746,7 +5761,7 @@
       }
     }
 #elif !defined COMPILE_PCRE8
-  jump[0] = CMP(SLJIT_C_GREATER, TMP1, 0, SLJIT_IMM, 255);
+  jump[0] = CMP(SLJIT_GREATER, TMP1, 0, SLJIT_IMM, 255);
   if (type == OP_CLASS)
     {
     add_jump(compiler, backtracks, jump[0]);
@@ -5759,7 +5774,7 @@
   OP1(SLJIT_MOV_UB, TMP1, 0, SLJIT_MEM1(TMP1), (sljit_sw)cc);
   OP2(SLJIT_SHL, TMP2, 0, SLJIT_IMM, 1, TMP2, 0);
   OP2(SLJIT_AND | SLJIT_SET_E, SLJIT_UNUSED, 0, TMP1, 0, TMP2, 0);
-  add_jump(compiler, backtracks, JUMP(SLJIT_C_ZERO));
+  add_jump(compiler, backtracks, JUMP(SLJIT_ZERO));
 
 #if defined SUPPORT_UTF || !defined COMPILE_PCRE8
   if (jump[0] != NULL)
@@ -5785,17 +5800,17 @@
     OP1(SLJIT_MOV, TMP3, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, begin));
     OP1(SLJIT_MOV, TMP2, 0, SLJIT_IMM, length);
     label = LABEL();
-    add_jump(compiler, backtracks, CMP(SLJIT_C_LESS_EQUAL, STR_PTR, 0, TMP3, 0));
+    add_jump(compiler, backtracks, CMP(SLJIT_LESS_EQUAL, STR_PTR, 0, TMP3, 0));
     skip_char_back(common);
     OP2(SLJIT_SUB | SLJIT_SET_E, TMP2, 0, TMP2, 0, SLJIT_IMM, 1);
-    JUMPTO(SLJIT_C_NOT_ZERO, label);
+    JUMPTO(SLJIT_NOT_ZERO, label);
     }
   else
 #endif
     {
     OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, begin));
     OP2(SLJIT_SUB, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(length));
-    add_jump(compiler, backtracks, CMP(SLJIT_C_LESS, STR_PTR, 0, TMP1, 0));
+    add_jump(compiler, backtracks, CMP(SLJIT_LESS, STR_PTR, 0, TMP1, 0));
     }
   check_start_used_ptr(common);
   return cc + LINK_SIZE;
@@ -5856,7 +5871,7 @@
   {
   /* We have a fixed-length byte sequence. */
   OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, SLJIT_IMM, context.length);
-  add_jump(compiler, backtracks, CMP(SLJIT_C_GREATER, STR_PTR, 0, STR_END, 0));
+  add_jump(compiler, backtracks, CMP(SLJIT_GREATER, STR_PTR, 0, STR_END, 0));
 
   context.sourcereg = -1;
 #if defined SLJIT_UNALIGNED && SLJIT_UNALIGNED
@@ -5920,14 +5935,14 @@
   {
   offset = GET2(slot, 0) << 1;
   GET_LOCAL_BASE(TMP2, 0, OVECTOR(offset));
-  add_jump(compiler, &found, CMP(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset), TMP1, 0));
+  add_jump(compiler, &found, CMP(SLJIT_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset), TMP1, 0));
   slot += common->name_entry_size;
   }
 
 offset = GET2(slot, 0) << 1;
 GET_LOCAL_BASE(TMP2, 0, OVECTOR(offset));
 if (backtracks != NULL && !common->jscript_compat)
-  add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset), TMP1, 0));
+  add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset), TMP1, 0));
 
 set_jumps(found, LABEL());
 }
@@ -5947,7 +5962,7 @@
   OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset));
   /* OVECTOR(1) contains the "string begin - 1" constant. */
   if (withchecks && !common->jscript_compat)
-    add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
+    add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
   }
 else
   OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP2), 0);
@@ -5962,7 +5977,7 @@
     OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
 
   if (withchecks)
-    jump = CMP(SLJIT_C_EQUAL, TMP1, 0, TMP2, 0);
+    jump = CMP(SLJIT_EQUAL, TMP1, 0, TMP2, 0);
 
   /* Needed to save important temporary registers. */
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), LOCALS0, STACK_TOP, 0);
@@ -5971,11 +5986,11 @@
   sljit_emit_ijump(compiler, SLJIT_CALL3, SLJIT_IMM, SLJIT_FUNC_OFFSET(do_utf_caselesscmp));
   OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(SLJIT_SP), LOCALS0);
   if (common->mode == JIT_COMPILE)
-    add_jump(compiler, backtracks, CMP(SLJIT_C_LESS_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 1));
+    add_jump(compiler, backtracks, CMP(SLJIT_LESS_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 1));
   else
     {
-    add_jump(compiler, backtracks, CMP(SLJIT_C_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 0));
-    nopartial = CMP(SLJIT_C_NOT_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 1);
+    add_jump(compiler, backtracks, CMP(SLJIT_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 0));
+    nopartial = CMP(SLJIT_NOT_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 1);
     check_partial(common, FALSE);
     add_jump(compiler, backtracks, JUMP(SLJIT_JUMP));
     JUMPHERE(nopartial);
@@ -5991,15 +6006,15 @@
     OP2(SLJIT_SUB | SLJIT_SET_E, TMP2, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw), TMP1, 0);
 
   if (withchecks)
-    jump = JUMP(SLJIT_C_ZERO);
+    jump = JUMP(SLJIT_ZERO);
 
   OP2(SLJIT_ADD, STR_PTR, 0, STR_PTR, 0, TMP2, 0);
-  partial = CMP(SLJIT_C_GREATER, STR_PTR, 0, STR_END, 0);
+  partial = CMP(SLJIT_GREATER, STR_PTR, 0, STR_END, 0);
   if (common->mode == JIT_COMPILE)
     add_jump(compiler, backtracks, partial);
 
   add_jump(compiler, *cc == OP_REF ? &common->casefulcmp : &common->caselesscmp, JUMP(SLJIT_FAST_CALL));
-  add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+  add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
 
   if (common->mode != JIT_COMPILE)
     {
@@ -6008,10 +6023,10 @@
     /* TMP2 -= STR_END - STR_PTR */
     OP2(SLJIT_SUB, TMP2, 0, TMP2, 0, STR_PTR, 0);
     OP2(SLJIT_ADD, TMP2, 0, TMP2, 0, STR_END, 0);
-    partial = CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, 0);
+    partial = CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, 0);
     OP1(SLJIT_MOV, STR_PTR, 0, STR_END, 0);
     add_jump(compiler, *cc == OP_REF ? &common->casefulcmp : &common->caselesscmp, JUMP(SLJIT_FAST_CALL));
-    add_jump(compiler, backtracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+    add_jump(compiler, backtracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
     JUMPHERE(partial);
     check_partial(common, FALSE);
     add_jump(compiler, backtracks, JUMP(SLJIT_JUMP));
@@ -6097,13 +6112,13 @@
     /* Handles both invalid and empty cases. Since the minimum repeat,
     is zero the invalid case is basically the same as an empty case. */
     if (ref)
-      zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
+      zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
     else
       {
       compile_dnref_search(common, ccbegin, NULL);
       OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP2), 0);
       OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), POSSESSIVE1, TMP2, 0);
-      zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
+      zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
       }
     /* Restore if not zero length. */
     OP2(SLJIT_ADD, STACK_TOP, 0, STACK_TOP, 0, SLJIT_IMM, sizeof(sljit_sw));
@@ -6116,15 +6131,15 @@
     OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(0), SLJIT_IMM, 0);
     if (ref)
       {
-      add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
-      zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
+      add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
+      zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
       }
     else
       {
       compile_dnref_search(common, ccbegin, &backtrack->topbacktracks);
       OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP2), 0);
       OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), POSSESSIVE1, TMP2, 0);
-      zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
+      zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
       }
     }
 
@@ -6142,10 +6157,10 @@
     OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
     OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), POSSESSIVE0, TMP1, 0);
     if (min > 1)
-      CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, min, label);
+      CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, min, label);
     if (max > 1)
       {
-      jump = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, max);
+      jump = CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, max);
       allocate_stack(common, 1);
       OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(0), STR_PTR, 0);
       JUMPTO(SLJIT_JUMP, label);
@@ -6180,13 +6195,13 @@
   /* Handles both invalid and empty cases. Since the minimum repeat,
   is zero the invalid case is basically the same as an empty case. */
   if (ref)
-    zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
+    zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
   else
     {
     compile_dnref_search(common, ccbegin, NULL);
     OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP2), 0);
     OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(2), TMP2, 0);
-    zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
+    zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
     }
   /* Length is non-zero, we can match real repeats. */
   OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(0), STR_PTR, 0);
@@ -6196,21 +6211,21 @@
   {
   if (ref)
     {
-    add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
-    zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
+    add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
+    zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(offset + 1));
     }
   else
     {
     compile_dnref_search(common, ccbegin, &backtrack->topbacktracks);
     OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP2), 0);
     OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(2), TMP2, 0);
-    zerolength = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
+    zerolength = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_MEM1(TMP2), sizeof(sljit_sw));
     }
   }
 
 BACKTRACK_AS(iterator_backtrack)->matchingpath = LABEL();
 if (max > 0)
-  add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_GREATER_EQUAL, SLJIT_MEM1(STACK_TOP), STACK(1), SLJIT_IMM, max));
+  add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_GREATER_EQUAL, SLJIT_MEM1(STACK_TOP), STACK(1), SLJIT_IMM, max));
 
 if (!ref)
   OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(STACK_TOP), STACK(2));
@@ -6222,7 +6237,7 @@
   OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(STACK_TOP), STACK(1));
   OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
   OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(1), TMP1, 0);
-  CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, min, BACKTRACK_AS(iterator_backtrack)->matchingpath);
+  CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, min, BACKTRACK_AS(iterator_backtrack)->matchingpath);
   }
 else if (max > 0)
   OP2(SLJIT_ADD, SLJIT_MEM1(STACK_TOP), STACK(1), SLJIT_MEM1(STACK_TOP), STACK(1), SLJIT_IMM, 1);
@@ -6300,11 +6315,11 @@
 else
   JUMPTO(SLJIT_FAST_CALL, entry->entry);
 /* Leave if the match is failed. */
-add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, 0));
+add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, 0));
 return cc + 1 + LINK_SIZE;
 }
 
-static int SLJIT_CALL do_callout(struct jit_arguments* arguments, PUBL(callout_block) *callout_block, pcre_uchar **jit_ovector)
+static int SLJIT_CALL do_callout(struct jit_arguments *arguments, PUBL(callout_block) *callout_block, pcre_uchar **jit_ovector)
 {
 const pcre_uchar *begin = arguments->begin;
 int *offset_vector = arguments->offsets;
@@ -6364,9 +6379,9 @@
 
 allocate_stack(common, CALLOUT_ARG_SIZE / sizeof(sljit_sw));
 
+SLJIT_ASSERT(common->capture_last_ptr != 0);
 OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(SLJIT_SP), common->capture_last_ptr);
 OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
-SLJIT_ASSERT(common->capture_last_ptr != 0);
 OP1(SLJIT_MOV_SI, SLJIT_MEM1(STACK_TOP), CALLOUT_ARG_OFFSET(callout_number), SLJIT_IMM, cc[1]);
 OP1(SLJIT_MOV_SI, SLJIT_MEM1(STACK_TOP), CALLOUT_ARG_OFFSET(capture_last), TMP2, 0);
 
@@ -6392,11 +6407,11 @@
 
 /* Check return value. */
 OP2(SLJIT_SUB | SLJIT_SET_S, SLJIT_UNUSED, 0, SLJIT_RETURN_REG, 0, SLJIT_IMM, 0);
-add_jump(compiler, &backtrack->topbacktracks, JUMP(SLJIT_C_SIG_GREATER));
+add_jump(compiler, &backtrack->topbacktracks, JUMP(SLJIT_SIG_GREATER));
 if (common->forced_quit_label == NULL)
-  add_jump(compiler, &common->forced_quit, JUMP(SLJIT_C_SIG_LESS));
+  add_jump(compiler, &common->forced_quit, JUMP(SLJIT_SIG_LESS));
 else
-  JUMPTO(SLJIT_C_SIG_LESS, common->forced_quit_label);
+  JUMPTO(SLJIT_SIG_LESS, common->forced_quit_label);
 return cc + 2 + 2 * LINK_SIZE;
 }
 
@@ -6454,7 +6469,7 @@
   /* This is a braminzero backtrack path. */
   OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(0));
   free_stack(common, 1);
-  brajump = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
+  brajump = CMP(SLJIT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
   }
 
 if (framesize < 0)
@@ -6989,7 +7004,7 @@
 
 has_alternatives = *cc == OP_ALT;
 if (SLJIT_UNLIKELY(opcode == OP_COND || opcode == OP_SCOND))
-  has_alternatives = (*matchingpath == OP_RREF || *matchingpath == OP_DNRREF) ? FALSE : TRUE;
+  has_alternatives = (*matchingpath == OP_RREF || *matchingpath == OP_DNRREF || *matchingpath == OP_FAIL) ? FALSE : TRUE;
 
 if (SLJIT_UNLIKELY(opcode == OP_COND) && (*cc == OP_KETRMAX || *cc == OP_KETRMIN))
   opcode = OP_SCOND;
@@ -7050,13 +7065,13 @@
   if (ket != OP_KETRMIN)
     {
     free_stack(common, 1);
-    braminzero = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
+    braminzero = CMP(SLJIT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
     }
   else
     {
     if (opcode == OP_ONCE || opcode >= OP_SBRA)
       {
-      jump = CMP(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
+      jump = CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
       OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(1));
       /* Nothing stored during the first run. */
       skip = JUMP(SLJIT_JUMP);
@@ -7065,19 +7080,19 @@
       if (opcode != OP_ONCE || BACKTRACK_AS(bracket_backtrack)->u.framesize < 0)
         {
         /* When we come from outside, private_data_ptr contains the previous STR_PTR. */
-        braminzero = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), private_data_ptr);
+        braminzero = CMP(SLJIT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), private_data_ptr);
         }
       else
         {
         /* Except when the whole stack frame must be saved. */
         OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), private_data_ptr);
-        braminzero = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_MEM1(TMP1), (BACKTRACK_AS(bracket_backtrack)->u.framesize + 1) * sizeof(sljit_sw));
+        braminzero = CMP(SLJIT_EQUAL, STR_PTR, 0, SLJIT_MEM1(TMP1), (BACKTRACK_AS(bracket_backtrack)->u.framesize + 1) * sizeof(sljit_sw));
         }
       JUMPHERE(skip);
       }
     else
       {
-      jump = CMP(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
+      jump = CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
       OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(1));
       JUMPHERE(jump);
       }
@@ -7223,7 +7238,7 @@
     {
     SLJIT_ASSERT(has_alternatives);
     add_jump(compiler, &(BACKTRACK_AS(bracket_backtrack)->u.condfailed),
-      CMP(SLJIT_C_EQUAL, SLJIT_MEM1(SLJIT_SP), OVECTOR(GET2(matchingpath, 1) << 1), SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
+      CMP(SLJIT_EQUAL, SLJIT_MEM1(SLJIT_SP), OVECTOR(GET2(matchingpath, 1) << 1), SLJIT_MEM1(SLJIT_SP), OVECTOR(1)));
     matchingpath += 1 + IMM2_SIZE;
     }
   else if (*matchingpath == OP_DNCREF)
@@ -7244,15 +7259,17 @@
       slot += common->name_entry_size;
       }
     OP1(SLJIT_MOV, STR_PTR, 0, TMP3, 0);
-    add_jump(compiler, &(BACKTRACK_AS(bracket_backtrack)->u.condfailed), JUMP(SLJIT_C_ZERO));
+    add_jump(compiler, &(BACKTRACK_AS(bracket_backtrack)->u.condfailed), JUMP(SLJIT_ZERO));
     matchingpath += 1 + 2 * IMM2_SIZE;
     }
-  else if (*matchingpath == OP_RREF || *matchingpath == OP_DNRREF)
+  else if (*matchingpath == OP_RREF || *matchingpath == OP_DNRREF || *matchingpath == OP_FAIL)
     {
     /* Never has other case. */
     BACKTRACK_AS(bracket_backtrack)->u.condfailed = NULL;
     SLJIT_ASSERT(!has_alternatives);
 
+    if (*matchingpath == OP_FAIL)
+      stacksize = 0;
     if (*matchingpath == OP_RREF)
       {
       stacksize = GET2(matchingpath, 1);
@@ -7387,7 +7404,7 @@
     if (has_alternatives)
       BACKTRACK_AS(bracket_backtrack)->alternative_matchingpath = LABEL();
     OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_MEM1(SLJIT_SP), repeat_ptr, SLJIT_MEM1(SLJIT_SP), repeat_ptr, SLJIT_IMM, 1);
-    JUMPTO(SLJIT_C_NOT_ZERO, rmax_label);
+    JUMPTO(SLJIT_NOT_ZERO, rmax_label);
     /* Drop STR_PTR for greedy plus quantifier. */
     if (opcode != OP_ONCE)
       free_stack(common, 1);
@@ -7399,14 +7416,14 @@
     /* Checking zero-length iteration. */
     if (opcode != OP_ONCE)
       {
-      CMPTO(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), private_data_ptr, STR_PTR, 0, rmax_label);
+      CMPTO(SLJIT_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), private_data_ptr, STR_PTR, 0, rmax_label);
       /* Drop STR_PTR for greedy plus quantifier. */
       if (bra != OP_BRAZERO)
         free_stack(common, 1);
       }
     else
       /* TMP2 must contain the starting STR_PTR. */
-      CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, STR_PTR, 0, rmax_label);
+      CMPTO(SLJIT_NOT_EQUAL, TMP2, 0, STR_PTR, 0, rmax_label);
     }
   else
     JUMPTO(SLJIT_JUMP, rmax_label);
@@ -7417,7 +7434,7 @@
   {
   count_match(common);
   OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_MEM1(SLJIT_SP), repeat_ptr, SLJIT_MEM1(SLJIT_SP), repeat_ptr, SLJIT_IMM, 1);
-  JUMPTO(SLJIT_C_NOT_ZERO, rmax_label);
+  JUMPTO(SLJIT_NOT_ZERO, rmax_label);
   }
 else if (repeat_type == OP_UPTO)
   {
@@ -7649,7 +7666,7 @@
       }
 
     if (opcode == OP_SBRAPOS || opcode == OP_SCBRAPOS)
-      add_jump(compiler, &emptymatch, CMP(SLJIT_C_EQUAL, TMP1, 0, STR_PTR, 0));
+      add_jump(compiler, &emptymatch, CMP(SLJIT_EQUAL, TMP1, 0, STR_PTR, 0));
 
     if (!zero)
       OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(stacksize - 1), SLJIT_IMM, 0);
@@ -7676,7 +7693,7 @@
       }
 
     if (opcode == OP_SBRAPOS || opcode == OP_SCBRAPOS)
-      add_jump(compiler, &emptymatch, CMP(SLJIT_C_EQUAL, TMP1, 0, STR_PTR, 0));
+      add_jump(compiler, &emptymatch, CMP(SLJIT_EQUAL, TMP1, 0, STR_PTR, 0));
 
     if (!zero)
       {
@@ -7732,9 +7749,9 @@
 if (!zero)
   {
   if (framesize < 0)
-    add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(STACK_TOP), STACK(stacksize - 1), SLJIT_IMM, 0));
+    add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_NOT_EQUAL, SLJIT_MEM1(STACK_TOP), STACK(stacksize - 1), SLJIT_IMM, 0));
   else /* TMP2 is set to [private_data_ptr] above. */
-    add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(TMP2), (stacksize - 1) * sizeof(sljit_sw), SLJIT_IMM, 0));
+    add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_NOT_EQUAL, SLJIT_MEM1(TMP2), (stacksize - 1) * sizeof(sljit_sw), SLJIT_IMM, 0));
   }
 
 /* None of them matched. */
@@ -7848,7 +7865,7 @@
 pcre_uchar opcode;
 pcre_uchar type;
 int max = -1, min = -1;
-pcre_uchar* end;
+pcre_uchar *end;
 jump_list *nomatch = NULL;
 struct sljit_jump *jump = NULL;
 struct sljit_label *label;
@@ -7932,9 +7949,9 @@
       OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), POSSESSIVE0);
       OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
       if (opcode == OP_CRRANGE && min > 0)
-        CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, min, label);
+        CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, min, label);
       if (opcode == OP_UPTO || (opcode == OP_CRRANGE && max > 0))
-        jump = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, max);
+        jump = CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, max);
       OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), POSSESSIVE0, TMP1, 0);
       }
 
@@ -7971,11 +7988,11 @@
       OP1(SLJIT_MOV, TMP1, 0, base, offset1);
       OP2(SLJIT_ADD, TMP1, 0, TMP1, 0, SLJIT_IMM, 1);
       OP1(SLJIT_MOV, base, offset1, TMP1, 0);
-      CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, max + 1, label);
+      CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, max + 1, label);
       }
     set_jumps(nomatch, LABEL());
     if (opcode == OP_CRRANGE)
-      add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_LESS, base, offset1, SLJIT_IMM, min + 1));
+      add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_LESS, base, offset1, SLJIT_IMM, min + 1));
     OP1(SLJIT_MOV, STR_PTR, 0, base, offset0);
     }
   BACKTRACK_AS(iterator_backtrack)->matchingpath = LABEL();
@@ -8017,7 +8034,7 @@
   label = LABEL();
   compile_char1_matchingpath(common, type, cc, &backtrack->topbacktracks);
   OP2(SLJIT_SUB | SLJIT_SET_E, tmp_base, tmp_offset, tmp_base, tmp_offset, SLJIT_IMM, 1);
-  JUMPTO(SLJIT_C_NOT_ZERO, label);
+  JUMPTO(SLJIT_NOT_ZERO, label);
   break;
 
   case OP_POSSTAR:
@@ -8036,7 +8053,7 @@
   else
     {
     OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_MEM1(SLJIT_SP), POSSESSIVE1, SLJIT_MEM1(SLJIT_SP), POSSESSIVE1, SLJIT_IMM, 1);
-    JUMPTO(SLJIT_C_NOT_ZERO, label);
+    JUMPTO(SLJIT_NOT_ZERO, label);
     }
   set_jumps(nomatch, LABEL());
   OP1(SLJIT_MOV, STR_PTR, 0, tmp_base, tmp_offset);
@@ -8056,7 +8073,7 @@
   label = LABEL();
   compile_char1_matchingpath(common, type, cc, &backtrack->topbacktracks);
   OP2(SLJIT_SUB | SLJIT_SET_E, tmp_base, tmp_offset, tmp_base, tmp_offset, SLJIT_IMM, 1);
-  JUMPTO(SLJIT_C_NOT_ZERO, label);
+  JUMPTO(SLJIT_NOT_ZERO, label);
 
   if (max != 0)
     {
@@ -8072,7 +8089,7 @@
   else
     {
     OP2(SLJIT_SUB | SLJIT_SET_E, SLJIT_MEM1(SLJIT_SP), POSSESSIVE1, SLJIT_MEM1(SLJIT_SP), POSSESSIVE1, SLJIT_IMM, 1);
-    JUMPTO(SLJIT_C_NOT_ZERO, label);
+    JUMPTO(SLJIT_NOT_ZERO, label);
     }
   set_jumps(nomatch, LABEL());
   OP1(SLJIT_MOV, STR_PTR, 0, tmp_base, tmp_offset);
@@ -8111,22 +8128,22 @@
   }
 
 if (common->accept_label == NULL)
-  add_jump(compiler, &common->accept, CMP(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(0)));
+  add_jump(compiler, &common->accept, CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(0)));
 else
-  CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(0), common->accept_label);
+  CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(0), common->accept_label);
 OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
 OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, notempty));
-add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+add_jump(compiler, &backtrack->topbacktracks, CMP(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
 OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, notempty_atstart));
 if (common->accept_label == NULL)
-  add_jump(compiler, &common->accept, CMP(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, 0));
+  add_jump(compiler, &common->accept, CMP(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, 0));
 else
-  CMPTO(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, 0, common->accept_label);
+  CMPTO(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, 0, common->accept_label);
 OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, str));
 if (common->accept_label == NULL)
-  add_jump(compiler, &common->accept, CMP(SLJIT_C_NOT_EQUAL, TMP2, 0, STR_PTR, 0));
+  add_jump(compiler, &common->accept, CMP(SLJIT_NOT_EQUAL, TMP2, 0, STR_PTR, 0));
 else
-  CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, STR_PTR, 0, common->accept_label);
+  CMPTO(SLJIT_NOT_EQUAL, TMP2, 0, STR_PTR, 0, common->accept_label);
 add_jump(compiler, &backtrack->topbacktracks, JUMP(SLJIT_JUMP));
 return cc + 1;
 }
@@ -8566,7 +8583,7 @@
     set_jumps(current->topbacktracks, LABEL());
     OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(0));
     free_stack(common, 1);
-    CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
+    CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
     }
   else
     {
@@ -8575,13 +8592,13 @@
     if (opcode <= OP_PLUS)
       {
       OP1(SLJIT_MOV, STR_PTR, 0, base, offset0);
-      jump = CMP(SLJIT_C_LESS_EQUAL, STR_PTR, 0, base, offset1);
+      jump = CMP(SLJIT_LESS_EQUAL, STR_PTR, 0, base, offset1);
       }
     else
       {
       OP1(SLJIT_MOV, TMP1, 0, base, offset1);
       OP1(SLJIT_MOV, STR_PTR, 0, base, offset0);
-      jump = CMP(SLJIT_C_LESS_EQUAL, TMP1, 0, SLJIT_IMM, min + 1);
+      jump = CMP(SLJIT_LESS_EQUAL, TMP1, 0, SLJIT_IMM, min + 1);
       OP2(SLJIT_SUB, base, offset1, TMP1, 0, SLJIT_IMM, 1);
       }
     skip_char_back(common);
@@ -8626,12 +8643,12 @@
   OP1(SLJIT_MOV, base, offset1, TMP1, 0);
 
   if (opcode == OP_CRMINRANGE)
-    CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, min + 1, label);
+    CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, min + 1, label);
 
   if (opcode == OP_CRMINRANGE && max == 0)
     JUMPTO(SLJIT_JUMP, CURRENT_AS(iterator_backtrack)->matchingpath);
   else
-    CMPTO(SLJIT_C_LESS, TMP1, 0, SLJIT_IMM, max + 2, CURRENT_AS(iterator_backtrack)->matchingpath);
+    CMPTO(SLJIT_LESS, TMP1, 0, SLJIT_IMM, max + 2, CURRENT_AS(iterator_backtrack)->matchingpath);
 
   set_jumps(jumplist, LABEL());
   if (private_data_ptr == 0)
@@ -8641,7 +8658,7 @@
   case OP_QUERY:
   OP1(SLJIT_MOV, STR_PTR, 0, base, offset0);
   OP1(SLJIT_MOV, base, offset0, SLJIT_IMM, 0);
-  CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
+  CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
   jump = JUMP(SLJIT_JUMP);
   set_jumps(current->topbacktracks, LABEL());
   OP1(SLJIT_MOV, STR_PTR, 0, base, offset0);
@@ -8655,7 +8672,7 @@
   case OP_MINQUERY:
   OP1(SLJIT_MOV, STR_PTR, 0, base, offset0);
   OP1(SLJIT_MOV, base, offset0, SLJIT_IMM, 0);
-  jump = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
+  jump = CMP(SLJIT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
   compile_char1_matchingpath(common, type, cc, &jumplist);
   JUMPTO(SLJIT_JUMP, CURRENT_AS(iterator_backtrack)->matchingpath);
   set_jumps(jumplist, LABEL());
@@ -8696,12 +8713,12 @@
   set_jumps(current->topbacktracks, LABEL());
   OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(0));
   free_stack(common, 1);
-  CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
+  CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
   return;
   }
 
 OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(0));
-CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
+CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(iterator_backtrack)->matchingpath);
 set_jumps(current->topbacktracks, LABEL());
 free_stack(common, ref ? 2 : 3);
 }
@@ -8759,7 +8776,7 @@
   if (bra == OP_BRAZERO)
     {
     OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(0), SLJIT_IMM, 0);
-    CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(assert_backtrack)->matchingpath);
+    CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(assert_backtrack)->matchingpath);
     free_stack(common, 1);
     }
   return;
@@ -8770,12 +8787,12 @@
   if (*cc == OP_ASSERT_NOT || *cc == OP_ASSERTBACK_NOT)
     {
     OP1(SLJIT_MOV, SLJIT_MEM1(STACK_TOP), STACK(0), SLJIT_IMM, 0);
-    CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(assert_backtrack)->matchingpath);
+    CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(assert_backtrack)->matchingpath);
     free_stack(common, 1);
     return;
     }
   free_stack(common, 1);
-  brajump = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
+  brajump = CMP(SLJIT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0);
   }
 
 if (*cc == OP_ASSERT || *cc == OP_ASSERTBACK)
@@ -8881,7 +8898,7 @@
     {
     OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(STACK_TOP), STACK(0));
     free_stack(common, 1);
-    brazero = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, 0);
+    brazero = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, 0);
     }
   }
 else if (ket == OP_KETRMIN)
@@ -8892,7 +8909,7 @@
     if (repeat_type != 0)
       {
       /* TMP1 was set a few lines above. */
-      CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0, CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
+      CMPTO(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0, CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
       /* Drop STR_PTR for non-greedy plus quantifier. */
       if (opcode != OP_ONCE)
         free_stack(common, 1);
@@ -8901,11 +8918,11 @@
       {
       /* Checking zero-length iteration. */
       if (opcode != OP_ONCE || CURRENT_AS(bracket_backtrack)->u.framesize < 0)
-        CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), private_data_ptr, CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
+        CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), private_data_ptr, CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
       else
         {
         OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), private_data_ptr);
-        CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(TMP1), (CURRENT_AS(bracket_backtrack)->u.framesize + 1) * sizeof(sljit_sw), CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
+        CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_MEM1(TMP1), (CURRENT_AS(bracket_backtrack)->u.framesize + 1) * sizeof(sljit_sw), CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
         }
       /* Drop STR_PTR for non-greedy plus quantifier. */
       if (opcode != OP_ONCE)
@@ -8922,7 +8939,7 @@
   {
   OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(STACK_TOP), STACK(0));
   free_stack(common, 1);
-  brazero = CMP(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0);
+  brazero = CMP(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0);
   }
 else if (repeat_type == OP_EXACT)
   {
@@ -8971,7 +8988,7 @@
     free_stack(common, 1);
 
     alt_max = 2;
-    alt1 = CMP(SLJIT_C_EQUAL, TMP1, 0, SLJIT_IMM, sizeof(sljit_uw));
+    alt1 = CMP(SLJIT_EQUAL, TMP1, 0, SLJIT_IMM, sizeof(sljit_uw));
     }
   }
 else if (has_alternatives)
@@ -8982,16 +8999,17 @@
   if (alt_max > 4)
     {
     /* Table jump if alt_max is greater than 4. */
-    next_update_addr = common->read_only_data_ptr;
-    common->read_only_data_ptr += alt_max;
+    next_update_addr = allocate_read_only_data(common, alt_max * sizeof(sljit_uw));
+    if (SLJIT_UNLIKELY(next_update_addr == NULL))
+      return;
     sljit_emit_ijump(compiler, SLJIT_JUMP, SLJIT_MEM1(TMP1), (sljit_sw)next_update_addr);
     add_label_addr(common, next_update_addr++);
     }
   else
     {
     if (alt_max == 4)
-      alt2 = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, 2 * sizeof(sljit_uw));
-    alt1 = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, sizeof(sljit_uw));
+      alt2 = CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, 2 * sizeof(sljit_uw));
+    alt1 = CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, sizeof(sljit_uw));
     }
   }
 
@@ -9124,13 +9142,13 @@
           {
           JUMPHERE(alt1);
           if (alt_max == 3 && alt_count == sizeof(sljit_uw))
-            alt2 = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, 2 * sizeof(sljit_uw));
+            alt2 = CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, 2 * sizeof(sljit_uw));
           }
         else
           {
           JUMPHERE(alt2);
           if (alt_max == 4)
-            alt1 = CMP(SLJIT_C_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, 3 * sizeof(sljit_uw));
+            alt1 = CMP(SLJIT_GREATER_EQUAL, TMP1, 0, SLJIT_IMM, 3 * sizeof(sljit_uw));
           }
         }
       alt_count += sizeof(sljit_uw);
@@ -9218,7 +9236,7 @@
   {
   OP2(SLJIT_ADD, TMP1, 0, SLJIT_MEM1(SLJIT_SP), repeat_ptr, SLJIT_IMM, 1);
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), repeat_ptr, TMP1, 0);
-  CMPTO(SLJIT_C_LESS_EQUAL, TMP1, 0, SLJIT_IMM, repeat_count, exact_label);
+  CMPTO(SLJIT_LESS_EQUAL, TMP1, 0, SLJIT_IMM, repeat_count, exact_label);
   }
 else if (ket == OP_KETRMAX)
   {
@@ -9226,7 +9244,7 @@
   if (bra != OP_BRAZERO)
     free_stack(common, 1);
 
-  CMPTO(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
+  CMPTO(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, 0, CURRENT_AS(bracket_backtrack)->recursive_matchingpath);
   if (bra == OP_BRAZERO)
     {
     OP1(SLJIT_MOV, STR_PTR, 0, SLJIT_MEM1(STACK_TOP), STACK(1));
@@ -9244,7 +9262,7 @@
   affect badly the free_stack(2) above. */
   if (opcode != OP_ONCE)
     free_stack(common, 1);
-  CMPTO(SLJIT_C_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0, rmin_label);
+  CMPTO(SLJIT_NOT_EQUAL, TMP1, 0, SLJIT_IMM, 0, rmin_label);
   if (opcode == OP_ONCE)
     free_stack(common, bra == OP_BRAMINZERO ? 2 : 1);
   else if (bra == OP_BRAMINZERO)
@@ -9342,8 +9360,8 @@
     loop = LABEL();
     OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(STACK_TOP), -(int)sizeof(sljit_sw));
     JUMPHERE(jump);
-    CMPTO(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(STACK_TOP), -(int)(2 * sizeof(sljit_sw)), TMP1, 0, loop);
-    CMPTO(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(STACK_TOP), -(int)(3 * sizeof(sljit_sw)), TMP2, 0, loop);
+    CMPTO(SLJIT_NOT_EQUAL, SLJIT_MEM1(STACK_TOP), -(int)(2 * sizeof(sljit_sw)), TMP1, 0, loop);
+    CMPTO(SLJIT_NOT_EQUAL, SLJIT_MEM1(STACK_TOP), -(int)(3 * sizeof(sljit_sw)), TMP2, 0, loop);
     add_jump(compiler, &common->then_trap->quit, JUMP(SLJIT_JUMP));
     return;
     }
@@ -9373,7 +9391,7 @@
   OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(SLJIT_SP), LOCALS0);
 
   OP1(SLJIT_MOV, STR_PTR, 0, TMP1, 0);
-  add_jump(compiler, &common->reset_match, CMP(SLJIT_C_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, -1));
+  add_jump(compiler, &common->reset_match, CMP(SLJIT_NOT_EQUAL, STR_PTR, 0, SLJIT_IMM, -1));
   return;
   }
 
@@ -9766,9 +9784,7 @@
 rootbacktrack.cc = (pcre_uchar *)re + re->name_table_offset + re->name_count * re->name_entry_size;
 
 common->start = rootbacktrack.cc;
-common->read_only_data = NULL;
-common->read_only_data_size = 0;
-common->read_only_data_ptr = NULL;
+common->read_only_data_head = NULL;
 common->fcc = tables + fcc_offset;
 common->lcc = (sljit_sw)(tables + lcc_offset);
 common->mode = mode;
@@ -9849,7 +9865,7 @@
 
 /* Calculate the local space size on the stack. */
 common->ovector_start = LIMIT_MATCH + sizeof(sljit_sw);
-common->optimized_cbracket = (pcre_uint8 *)SLJIT_MALLOC(re->top_bracket + 1);
+common->optimized_cbracket = (pcre_uint8 *)SLJIT_MALLOC(re->top_bracket + 1, compiler->allocator_data);
 if (!common->optimized_cbracket)
   return;
 #if defined DEBUG_FORCE_UNOPTIMIZED_CBRAS && DEBUG_FORCE_UNOPTIMIZED_CBRAS == 1
@@ -9865,7 +9881,7 @@
 #endif
 if (!check_opcode_types(common, common->start, ccend))
   {
-  SLJIT_FREE(common->optimized_cbracket);
+  SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
   return;
   }
 
@@ -9927,10 +9943,10 @@
 common->cbra_ptr = OVECTOR_START + (re->top_bracket + 1) * 2 * sizeof(sljit_sw);
 
 total_length = ccend - common->start;
-common->private_data_ptrs = (sljit_si *)SLJIT_MALLOC(total_length * (sizeof(sljit_si) + (common->has_then ? 1 : 0)));
+common->private_data_ptrs = (sljit_si *)SLJIT_MALLOC(total_length * (sizeof(sljit_si) + (common->has_then ? 1 : 0)), compiler->allocator_data);
 if (!common->private_data_ptrs)
   {
-  SLJIT_FREE(common->optimized_cbracket);
+  SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
   return;
   }
 memset(common->private_data_ptrs, 0, total_length * sizeof(sljit_si));
@@ -9939,8 +9955,8 @@
 set_private_data_ptrs(common, &private_data_size, ccend);
 if (private_data_size > SLJIT_MAX_LOCAL_SIZE)
   {
-  SLJIT_FREE(common->private_data_ptrs);
-  SLJIT_FREE(common->optimized_cbracket);
+  SLJIT_FREE(common->private_data_ptrs, compiler->allocator_data);
+  SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
   return;
   }
 
@@ -9951,25 +9967,11 @@
   set_then_offsets(common, common->start, NULL);
   }
 
-if (common->read_only_data_size > 0)
-  {
-  common->read_only_data = (sljit_uw *)SLJIT_MALLOC(common->read_only_data_size);
-  if (common->read_only_data == NULL)
-    {
-    SLJIT_FREE(common->optimized_cbracket);
-    SLJIT_FREE(common->private_data_ptrs);
-    return;
-    }
-  common->read_only_data_ptr = common->read_only_data;
-  }
-
-compiler = sljit_create_compiler();
+compiler = sljit_create_compiler(NULL);
 if (!compiler)
   {
-  SLJIT_FREE(common->optimized_cbracket);
-  SLJIT_FREE(common->private_data_ptrs);
-  if (common->read_only_data)
-    SLJIT_FREE(common->read_only_data);
+  SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
+  SLJIT_FREE(common->private_data_ptrs, compiler->allocator_data);
   return;
   }
 common->compiler = compiler;
@@ -10008,21 +10010,12 @@
   if ((re->options & PCRE_NO_START_OPTIMIZE) == 0)
     {
     if (mode == JIT_COMPILE && fast_forward_first_n_chars(common, (re->options & PCRE_FIRSTLINE) != 0))
-      {
-      /* If read_only_data is reallocated, we might have an allocation failure. */
-      if (common->read_only_data_size > 0 && common->read_only_data == NULL)
-        {
-        sljit_free_compiler(compiler);
-        SLJIT_FREE(common->optimized_cbracket);
-        SLJIT_FREE(common->private_data_ptrs);
-        return;
-        }
-      }
+      ;
     else if ((re->flags & PCRE_FIRSTSET) != 0)
       fast_forward_first_char(common, (pcre_uchar)re->first_char, (re->flags & PCRE_FCH_CASELESS) != 0, (re->options & PCRE_FIRSTLINE) != 0);
     else if ((re->flags & PCRE_STARTLINE) != 0)
       fast_forward_newline(common, (re->options & PCRE_FIRSTLINE) != 0);
-    else if ((re->flags & PCRE_STARTLINE) == 0 && study != NULL && (study->flags & PCRE_STUDY_MAPPED) != 0)
+    else if (study != NULL && (study->flags & PCRE_STUDY_MAPPED) != 0)
       fast_forward_start_bits(common, study->start_bits, (re->options & PCRE_FIRSTLINE) != 0);
     }
   }
@@ -10033,7 +10026,7 @@
   {
   OP1(SLJIT_MOV, SLJIT_RETURN_REG, 0, SLJIT_IMM, PCRE_ERROR_NOMATCH);
   OP2(SLJIT_ADD, TMP2, 0, STR_PTR, 0, SLJIT_IMM, IN_UCHARS(study->minlength));
-  minlength_check_failed = CMP(SLJIT_C_GREATER, TMP2, 0, STR_END, 0);
+  minlength_check_failed = CMP(SLJIT_GREATER, TMP2, 0, STR_END, 0);
   }
 if (common->req_char_ptr != 0)
   reqbyte_notfound = search_requested_char(common, (pcre_uchar)re->req_char, (re->flags & PCRE_RCH_CASELESS) != 0, (re->flags & PCRE_FIRSTSET) != 0);
@@ -10056,7 +10049,7 @@
 /* Copy the beginning of the string. */
 if (mode == JIT_PARTIAL_SOFT_COMPILE)
   {
-  jump = CMP(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, -1);
+  jump = CMP(SLJIT_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, -1);
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, STR_PTR, 0);
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->hit_start + sizeof(sljit_sw), STR_PTR, 0);
   JUMPHERE(jump);
@@ -10068,16 +10061,15 @@
 if (SLJIT_UNLIKELY(sljit_get_compiler_error(compiler)))
   {
   sljit_free_compiler(compiler);
-  SLJIT_FREE(common->optimized_cbracket);
-  SLJIT_FREE(common->private_data_ptrs);
-  if (common->read_only_data)
-    SLJIT_FREE(common->read_only_data);
+  SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
+  SLJIT_FREE(common->private_data_ptrs, compiler->allocator_data);
+  free_read_only_data(common->read_only_data_head, compiler->allocator_data);
   return;
   }
 
 if (common->might_be_empty)
   {
-  empty_match = CMP(SLJIT_C_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(0));
+  empty_match = CMP(SLJIT_EQUAL, STR_PTR, 0, SLJIT_MEM1(SLJIT_SP), OVECTOR(0));
   empty_match_found_label = LABEL();
   }
 
@@ -10109,10 +10101,9 @@
 if (SLJIT_UNLIKELY(sljit_get_compiler_error(compiler)))
   {
   sljit_free_compiler(compiler);
-  SLJIT_FREE(common->optimized_cbracket);
-  SLJIT_FREE(common->private_data_ptrs);
-  if (common->read_only_data)
-    SLJIT_FREE(common->read_only_data);
+  SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
+  SLJIT_FREE(common->private_data_ptrs, compiler->allocator_data);
+  free_read_only_data(common->read_only_data_head, compiler->allocator_data);
   return;
   }
 
@@ -10122,7 +10113,7 @@
 if (mode == JIT_PARTIAL_SOFT_COMPILE)
   {
   /* Update hit_start only in the first time. */
-  jump = CMP(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, 0);
+  jump = CMP(SLJIT_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, 0);
   OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr);
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->start_used_ptr, SLJIT_IMM, -1);
   OP1(SLJIT_MOV, SLJIT_MEM1(SLJIT_SP), common->hit_start, TMP1, 0);
@@ -10143,15 +10134,15 @@
   if (common->ff_newline_shortcut != NULL)
     {
     if ((re->options & PCRE_FIRSTLINE) == 0)
-      CMPTO(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0, common->ff_newline_shortcut);
+      CMPTO(SLJIT_LESS, STR_PTR, 0, STR_END, 0, common->ff_newline_shortcut);
     /* There cannot be more newlines here. */
     }
   else
     {
     if ((re->options & PCRE_FIRSTLINE) == 0)
-      CMPTO(SLJIT_C_LESS, STR_PTR, 0, STR_END, 0, mainloop_label);
+      CMPTO(SLJIT_LESS, STR_PTR, 0, STR_END, 0, mainloop_label);
     else
-      CMPTO(SLJIT_C_LESS, STR_PTR, 0, TMP1, 0, mainloop_label);
+      CMPTO(SLJIT_LESS, STR_PTR, 0, TMP1, 0, mainloop_label);
     }
   }
 
@@ -10160,7 +10151,7 @@
   JUMPHERE(reqbyte_notfound);
 
 if (mode == JIT_PARTIAL_SOFT_COMPILE)
-  CMPTO(SLJIT_C_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, -1, common->partialmatchlabel);
+  CMPTO(SLJIT_NOT_EQUAL, SLJIT_MEM1(SLJIT_SP), common->hit_start, SLJIT_IMM, -1, common->partialmatchlabel);
 
 OP1(SLJIT_MOV, SLJIT_RETURN_REG, 0, SLJIT_IMM, PCRE_ERROR_NOMATCH);
 JUMPTO(SLJIT_JUMP, common->quit_label);
@@ -10172,11 +10163,11 @@
   JUMPHERE(empty_match);
   OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
   OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, notempty));
-  CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0, empty_match_backtrack_label);
+  CMPTO(SLJIT_NOT_EQUAL, TMP2, 0, SLJIT_IMM, 0, empty_match_backtrack_label);
   OP1(SLJIT_MOV_UB, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, notempty_atstart));
-  CMPTO(SLJIT_C_EQUAL, TMP2, 0, SLJIT_IMM, 0, empty_match_found_label);
+  CMPTO(SLJIT_EQUAL, TMP2, 0, SLJIT_IMM, 0, empty_match_found_label);
   OP1(SLJIT_MOV, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, str));
-  CMPTO(SLJIT_C_NOT_EQUAL, TMP2, 0, STR_PTR, 0, empty_match_found_label);
+  CMPTO(SLJIT_NOT_EQUAL, TMP2, 0, STR_PTR, 0, empty_match_found_label);
   JUMPTO(SLJIT_JUMP, empty_match_backtrack_label);
   }
 
@@ -10190,10 +10181,9 @@
   if (SLJIT_UNLIKELY(sljit_get_compiler_error(compiler)))
     {
     sljit_free_compiler(compiler);
-    SLJIT_FREE(common->optimized_cbracket);
-    SLJIT_FREE(common->private_data_ptrs);
-    if (common->read_only_data)
-      SLJIT_FREE(common->read_only_data);
+    SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
+    SLJIT_FREE(common->private_data_ptrs, compiler->allocator_data);
+    free_read_only_data(common->read_only_data_head, compiler->allocator_data);
     return;
     }
   flush_stubs(common);
@@ -10214,7 +10204,7 @@
 OP2(SLJIT_ADD, TMP2, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(struct sljit_stack, limit), SLJIT_IMM, STACK_GROWTH_RATE);
 
 sljit_emit_ijump(compiler, SLJIT_CALL2, SLJIT_IMM, SLJIT_FUNC_OFFSET(sljit_stack_resize));
-jump = CMP(SLJIT_C_NOT_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 0);
+jump = CMP(SLJIT_NOT_EQUAL, SLJIT_RETURN_REG, 0, SLJIT_IMM, 0);
 OP1(SLJIT_MOV, TMP1, 0, ARGUMENTS, 0);
 OP1(SLJIT_MOV, TMP1, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(jit_arguments, stack));
 OP1(SLJIT_MOV, STACK_TOP, 0, SLJIT_MEM1(TMP1), SLJIT_OFFSETOF(struct sljit_stack, top));
@@ -10272,7 +10262,7 @@
   {
   set_jumps(common->reset_match, LABEL());
   do_reset_match(common, (re->top_bracket + 1) * 2);
-  CMPTO(SLJIT_C_GREATER, STR_PTR, 0, TMP1, 0, continue_match_label);
+  CMPTO(SLJIT_GREATER, STR_PTR, 0, TMP1, 0, continue_match_label);
   OP1(SLJIT_MOV, STR_PTR, 0, TMP1, 0);
   JUMPTO(SLJIT_JUMP, reset_match_label);
   }
@@ -10303,9 +10293,8 @@
   }
 #endif
 
-SLJIT_ASSERT(common->read_only_data + (common->read_only_data_size >> SLJIT_WORD_SHIFT) == common->read_only_data_ptr);
-SLJIT_FREE(common->optimized_cbracket);
-SLJIT_FREE(common->private_data_ptrs);
+SLJIT_FREE(common->optimized_cbracket, compiler->allocator_data);
+SLJIT_FREE(common->private_data_ptrs, compiler->allocator_data);
 
 executable_func = sljit_generate_code(compiler);
 executable_size = sljit_get_generated_code_size(compiler);
@@ -10318,8 +10307,7 @@
 sljit_free_compiler(compiler);
 if (executable_func == NULL)
   {
-  if (common->read_only_data)
-    SLJIT_FREE(common->read_only_data);
+  free_read_only_data(common->read_only_data_head, compiler->allocator_data);
   return;
   }
 
@@ -10337,14 +10325,13 @@
    * bit remains set, as the bit indicates that the pointer to the data
    * is valid.)
    */
-  functions = SLJIT_MALLOC(sizeof(executable_functions));
+  functions = SLJIT_MALLOC(sizeof(executable_functions), compiler->allocator_data);
   if (functions == NULL)
     {
     /* This case is highly unlikely since we just recently
     freed a lot of memory. Not impossible though. */
     sljit_free_code(executable_func);
-    if (common->read_only_data)
-      SLJIT_FREE(common->read_only_data);
+    free_read_only_data(common->read_only_data_head, compiler->allocator_data);
     return;
     }
   memset(functions, 0, sizeof(executable_functions));
@@ -10355,14 +10342,14 @@
   }
 
 functions->executable_funcs[mode] = executable_func;
-functions->read_only_data[mode] = common->read_only_data;
+functions->read_only_data_heads[mode] = common->read_only_data_head;
 functions->executable_sizes[mode] = executable_size;
 }
 
-static int jit_machine_stack_exec(jit_arguments *arguments, void* executable_func)
+static SLJIT_NOINLINE int jit_machine_stack_exec(jit_arguments *arguments, void *executable_func)
 {
 union {
-   void* executable_func;
+   void *executable_func;
    jit_function call_executable_func;
 } convert_executable_func;
 pcre_uint8 local_space[MACHINE_STACK_SIZE];
@@ -10383,7 +10370,7 @@
 {
 executable_functions *functions = (executable_functions *)extra_data->executable_jit;
 union {
-   void* executable_func;
+   void *executable_func;
    jit_function call_executable_func;
 } convert_executable_func;
 jit_arguments arguments;
@@ -10470,7 +10457,7 @@
 pcre_uchar *subject_ptr = (pcre_uchar *)subject;
 executable_functions *functions = (executable_functions *)extra_data->executable_jit;
 union {
-   void* executable_func;
+   void *executable_func;
    jit_function call_executable_func;
 } convert_executable_func;
 jit_arguments arguments;
@@ -10542,10 +10529,9 @@
   {
   if (functions->executable_funcs[i] != NULL)
     sljit_free_code(functions->executable_funcs[i]);
-  if (functions->read_only_data[i] != NULL)
-    SLJIT_FREE(functions->read_only_data[i]);
+  free_read_only_data(functions->read_only_data_heads[i], NULL);
   }
-SLJIT_FREE(functions);
+SLJIT_FREE(functions, compiler->allocator_data);
 }
 
 int
@@ -10582,7 +10568,7 @@
   startsize = maxsize;
 startsize = (startsize + STACK_GROWTH_RATE - 1) & ~(STACK_GROWTH_RATE - 1);
 maxsize = (maxsize + STACK_GROWTH_RATE - 1) & ~(STACK_GROWTH_RATE - 1);
-return (PUBL(jit_stack)*)sljit_allocate_stack(startsize, maxsize);
+return (PUBL(jit_stack)*)sljit_allocate_stack(startsize, maxsize, NULL);
 }
 
 #if defined COMPILE_PCRE8
@@ -10596,7 +10582,7 @@
 pcre32_jit_stack_free(pcre32_jit_stack *stack)
 #endif
 {
-sljit_free_stack((struct sljit_stack *)stack);
+sljit_free_stack((struct sljit_stack *)stack, NULL);
 }
 
 #if defined COMPILE_PCRE8
diff --git a/dist/pcre_jit_test.c b/dist/pcre_jit_test.c
index a40913e..d03993b 100644
--- a/dist/pcre_jit_test.c
+++ b/dist/pcre_jit_test.c
@@ -51,8 +51,6 @@
 
 #include "pcre_internal.h"
 
-#define PCRE_BUG 0x80000000
-
 /*
  Letter characters:
    \xe6\x92\xad = 0x64ad = 25773 (kanji)
@@ -69,6 +67,9 @@
       \xc3\x89 = 0xc9 = 201 (E')
    \xc3\xa1 = 0xe1 = 225 (a')
       \xc3\x81 = 0xc1 = 193 (A')
+   \x53 = 0x53 = S
+     \x73 = 0x73 = s
+     \xc5\xbf = 0x17f = 383 (long S)
    \xc8\xba = 0x23a = 570
       \xe2\xb1\xa5 = 0x2c65 = 11365
    \xe1\xbd\xb8 = 0x1f78 = 8056
@@ -78,6 +79,10 @@
    \xc7\x84 = 0x1c4 = 452
      \xc7\x85 = 0x1c5 = 453
      \xc7\x86 = 0x1c6 = 454
+ Caseless sets:
+   ucp_Armenian - \x{531}-\x{556} -> \x{561}-\x{586}
+   ucp_Coptic - \x{2c80}-\x{2ce3} -> caseless: XOR 0x1
+   ucp_Latin - \x{ff21}-\x{ff3a} -> \x{ff41]-\x{ff5a}
 
  Mark property:
    \xcc\x8d = 0x30d = 781
@@ -626,6 +631,9 @@
 	{ MUA, 0, "(?P<Name>a)?(?P<Name2>b)?(?(Name)c|d)+?dd", "bcabcacdb bdddd" },
 	{ MUA, 0, "(?P<Name>a)?(?P<Name2>b)?(?(Name)c|d)+l", "ababccddabdbccd abcccl" },
 	{ MUA, 0, "((?:a|aa)(?(1)aaa))x", "aax" },
+	{ MUA, 0, "(?(?!)a|b)", "ab" },
+	{ MUA, 0, "(?(?!)a)", "ab" },
+	{ MUA, 0 | F_NOMATCH, "(?(?!)a|b)", "ac" },
 
 	/* Set start of match. */
 	{ MUA, 0, "(?:\\Ka)*aaaab", "aaaaaaaa aaaaaaabb" },
@@ -944,7 +952,7 @@
 
 	pcre16_assign_jit_stack(extra, callback16, getstack16());
 }
-#endif /* SUPPORT_PCRE8 */
+#endif /* SUPPORT_PCRE16 */
 
 #ifdef SUPPORT_PCRE32
 static pcre32_jit_stack *stack32;
@@ -967,7 +975,7 @@
 
 	pcre32_assign_jit_stack(extra, callback32, getstack32());
 }
-#endif /* SUPPORT_PCRE8 */
+#endif /* SUPPORT_PCRE32 */
 
 #ifdef SUPPORT_PCRE16
 
@@ -1177,7 +1185,7 @@
 #elif defined SUPPORT_PCRE16
 	pcre16_config(PCRE_CONFIG_UTF16, &utf);
 	pcre16_config(PCRE_CONFIG_UNICODE_PROPERTIES, &ucp);
-#elif defined SUPPORT_PCRE16
+#elif defined SUPPORT_PCRE32
 	pcre32_config(PCRE_CONFIG_UTF32, &utf);
 	pcre32_config(PCRE_CONFIG_UNICODE_PROPERTIES, &ucp);
 #endif
diff --git a/dist/pcre_stringpiece.h b/dist/pcre_stringpiece.h
index 4e758ef..cc3dc42 100644
--- a/dist/pcre_stringpiece.h
+++ b/dist/pcre_stringpiece.h
@@ -42,10 +42,10 @@
 #include <string>
 #include <iosfwd>    // for ostream forward-declaration
 
-#if 0  /* @pcre_have_type_traits@ */
+#if 0
 #define HAVE_TYPE_TRAITS
 #include <type_traits.h>
-#elif 0  /* @pcre_have_bits_type_traits@ */
+#elif 0
 #define HAVE_TYPE_TRAITS
 #include <bits/type_traits.h>
 #endif
diff --git a/dist/pcre_study.c b/dist/pcre_study.c
index f19d9fb..998fe23 100644
--- a/dist/pcre_study.c
+++ b/dist/pcre_study.c
@@ -70,7 +70,7 @@
   code            pointer to start of group (the bracket)
   startcode       pointer to start of the whole pattern's code
   options         the compiling options
-  int             RECURSE depth
+  recurses        chain of recurse_check to catch mutual recursion
 
 Returns:   the minimum length
            -1 if \C in UTF-8 mode or (*ACCEPT) was encountered
@@ -80,12 +80,13 @@
 
 static int
 find_minlength(const REAL_PCRE *re, const pcre_uchar *code,
-  const pcre_uchar *startcode, int options, int recurse_depth)
+  const pcre_uchar *startcode, int options, recurse_check *recurses)
 {
 int length = -1;
 /* PCRE_UTF16 has the same value as PCRE_UTF8. */
 BOOL utf = (options & PCRE_UTF8) != 0;
 BOOL had_recurse = FALSE;
+recurse_check this_recurse;
 register int branchlength = 0;
 register pcre_uchar *cc = (pcre_uchar *)code + 1 + LINK_SIZE;
 
@@ -130,7 +131,7 @@
     case OP_SBRAPOS:
     case OP_ONCE:
     case OP_ONCE_NC:
-    d = find_minlength(re, cc, startcode, options, recurse_depth);
+    d = find_minlength(re, cc, startcode, options, recurses);
     if (d < 0) return d;
     branchlength += d;
     do cc += GET(cc, 1); while (*cc == OP_ALT);
@@ -393,7 +394,7 @@
         ce = cs = (pcre_uchar *)PRIV(find_bracket)(startcode, utf, GET2(slot, 0));
         if (cs == NULL) return -2;
         do ce += GET(ce, 1); while (*ce == OP_ALT);
-        if (cc > cs && cc < ce)
+        if (cc > cs && cc < ce)     /* Simple recursion */
           {
           d = 0;
           had_recurse = TRUE;
@@ -401,8 +402,22 @@
           }
         else
           {
-          int dd = find_minlength(re, cs, startcode, options, recurse_depth);
-          if (dd < d) d = dd;
+          recurse_check *r = recurses;
+          for (r = recurses; r != NULL; r = r->prev) if (r->group == cs) break;
+          if (r != NULL)           /* Mutual recursion */
+            {
+            d = 0;
+            had_recurse = TRUE;
+            break;
+            }
+          else
+            {
+            int dd;
+            this_recurse.prev = recurses;
+            this_recurse.group = cs;
+            dd = find_minlength(re, cs, startcode, options, &this_recurse);
+            if (dd < d) d = dd;
+            }
           }
         slot += re->name_entry_size;
         }
@@ -418,14 +433,26 @@
       ce = cs = (pcre_uchar *)PRIV(find_bracket)(startcode, utf, GET2(cc, 1));
       if (cs == NULL) return -2;
       do ce += GET(ce, 1); while (*ce == OP_ALT);
-      if (cc > cs && cc < ce)
+      if (cc > cs && cc < ce)    /* Simple recursion */
         {
         d = 0;
         had_recurse = TRUE;
         }
       else
         {
-        d = find_minlength(re, cs, startcode, options, recurse_depth);
+        recurse_check *r = recurses;
+        for (r = recurses; r != NULL; r = r->prev) if (r->group == cs) break;
+        if (r != NULL)           /* Mutual recursion */
+          {
+          d = 0;
+          had_recurse = TRUE;
+          }
+        else
+          {
+          this_recurse.prev = recurses;
+          this_recurse.group = cs;
+          d = find_minlength(re, cs, startcode, options, &this_recurse);
+          }
         }
       }
     else d = 0;
@@ -474,12 +501,21 @@
     case OP_RECURSE:
     cs = ce = (pcre_uchar *)startcode + GET(cc, 1);
     do ce += GET(ce, 1); while (*ce == OP_ALT);
-    if ((cc > cs && cc < ce) || recurse_depth > 10)
+    if (cc > cs && cc < ce)    /* Simple recursion */
       had_recurse = TRUE;
     else
       {
-      branchlength += find_minlength(re, cs, startcode, options,
-        recurse_depth + 1);
+      recurse_check *r = recurses;
+      for (r = recurses; r != NULL; r = r->prev) if (r->group == cs) break;
+      if (r != NULL)           /* Mutual recursion */
+        had_recurse = TRUE;
+      else
+        {
+        this_recurse.prev = recurses;
+        this_recurse.group = cs;
+        branchlength += find_minlength(re, cs, startcode, options,
+          &this_recurse);
+        }
       }
     cc += 1 + LINK_SIZE;
     break;
@@ -1503,7 +1539,7 @@
 
 /* Find the minimum length of subject string. */
 
-switch(min = find_minlength(re, code, code, re->options, 0))
+switch(min = find_minlength(re, code, code, re->options, NULL))
   {
   case -2: *errorptr = "internal error: missing capturing bracket"; return NULL;
   case -3: *errorptr = "internal error: opcode not recognized"; return NULL;
diff --git a/dist/pcrecpp.cc b/dist/pcrecpp.cc
index 300dd5a..c595cbc 100644
--- a/dist/pcrecpp.cc
+++ b/dist/pcrecpp.cc
@@ -812,10 +812,6 @@
                                void* dest,
                                int radix) {
 #ifndef HAVE_LONG_LONG
-  (void)(str);
-  (void)(n);
-  (void)(dest);
-  (void)(radix);
   return false;
 #else
   if (n == 0) return false;
@@ -847,10 +843,6 @@
                                 void* dest,
                                 int radix) {
 #ifndef HAVE_UNSIGNED_LONG_LONG
-  (void)(str);
-  (void)(n);
-  (void)(dest);
-  (void)(radix);
   return false;
 #else
   if (n == 0) return false;
diff --git a/dist/pcrecpparg.h b/dist/pcrecpparg.h
index 59c7dc6..b4f9c3f 100644
--- a/dist/pcrecpparg.h
+++ b/dist/pcrecpparg.h
@@ -78,10 +78,10 @@
   PCRE_MAKE_PARSER(unsigned int,       parse_uint);
   PCRE_MAKE_PARSER(long,               parse_long);
   PCRE_MAKE_PARSER(unsigned long,      parse_ulong);
-#if 1  /* @pcre_have_long_long@ */
+#if 1
   PCRE_MAKE_PARSER(long long,          parse_longlong);
 #endif
-#if 1  /* @pcre_have_ulong_long@ */
+#if 1
   PCRE_MAKE_PARSER(unsigned long long, parse_ulonglong);
 #endif
   PCRE_MAKE_PARSER(float,              parse_float);
@@ -157,10 +157,10 @@
 MAKE_INTEGER_PARSER(unsigned int,       uint)      /* after these statement  */
 MAKE_INTEGER_PARSER(long,               long)      /* because they can cause */
 MAKE_INTEGER_PARSER(unsigned long,      ulong)     /* compiler warnings if   */
-#if 1  /* @pcre_have_long_long@ */                 /* the checking level is  */
+#if 1                          /* the checking level is  */
 MAKE_INTEGER_PARSER(long long,          longlong)  /* turned up high enough. */
 #endif                                             /*                        */
-#if 1  /* @pcre_have_ulong_long@ */                /*                        */
+#if 1                         /*                        */
 MAKE_INTEGER_PARSER(unsigned long long, ulonglong) /*                        */
 #endif
 
diff --git a/dist/pcregexp.pas b/dist/pcregexp.pas
index 77afd56..bb2b3da 100644
--- a/dist/pcregexp.pas
+++ b/dist/pcregexp.pas
@@ -1,845 +1,845 @@
-{
-  pcRegExp - Perl compatible regular expressions for Virtual Pascal
-  (c) 2001 Peter S. Voronov aka Chem O'Dun <petervrn@yahoo.com>
-
-  Based on PCRE library interface unit for Virtual Pascal.
-  (c) 2001 Alexander Tokarev <dwalin@dwalin.ru>
-
-  The current PCRE version is: 3.7
-
-  This software may be distributed under the terms of the modified BSD license
-  Copyright (c) 2001, Alexander Tokarev
-  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions are met:
-
-    * Redistributions of source code must retain the above copyright notice,
-      this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright notice,
-      this list of conditions and the following disclaimer in the documentation
-      and/or other materials provided with the distribution.
-    * Neither the name of the <ORGANIZATION> nor the names of its contributors
-      may be used to endorse or promote products derived from this software without
-      specific prior written permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  The PCRE library is written by: Philip Hazel <ph10@cam.ac.uk>
-  Copyright (c) 1997-2004 University of Cambridge
-
-  AngelsHolocaust 4-11-04 updated to use version v5.0
-  (INFO: this is regex-directed, NFA)
-  AH:  9-11-04 - pcre_free: removed var, pcre already gives the ptr, now
-			    everything works as it should (no more crashes)
-		 -> removed CheckRegExp because pcre handles errors perfectly
-      10-11-04 - added pcError (errorhandling), pcInit
-      13-11-04 - removed the ErrorPos = 0 check -> always print erroroffset
-      17-10-05 - support for \1-\9 backreferences in TpcRegExp.GetReplStr
-      17-02-06 - added RunTimeOptions: caller can set options while searching
-      19-02-06 - added SearchOfs(): let PCRE use the complete string and offset
-		 into the string itself
-      20-12-06 - support for version 7.0
-      27.08.08 - support for v7.7
-}
-
-{$H+} {$DEFINE PCRE_3_7} {$DEFINE PCRE_5_0} {$DEFINE PCRE_7_0} {$DEFINE PCRE_7_7}
-
-Unit pcregexp;
-
-Interface
-
-uses objects;
-
-Type
- PpcRegExp = ^TpcRegExp;
-// TpcRegExp = object
- TpcRegExp = object(TObject)
-  MatchesCount: integer;
-  RegExpC, RegExpExt : Pointer;
-  Matches:Pointer;
-  RegExp: shortstring;
-  SourceLen: integer;
-  PartialMatch : boolean;
-  Error : boolean;
-  ErrorMsg : Pchar;
-  ErrorPos : integer;
-  RunTimeOptions: Integer; // options which can be set by the caller
-  constructor Init(const ARegExp : shortstring; AOptions : integer; ALocale : Pointer);
-  function Search(AStr: Pchar; ALen : longint) : boolean; virtual;
-  function SearchNext( AStr: Pchar; ALen : longint) : boolean; virtual;
-  function SearchOfs ( AStr: Pchar; ALen, AOfs : longint) : boolean; virtual;
-  function MatchSub(ANom: integer; var Pos, Len : longint) : boolean; virtual;
-  function MatchFull(var Pos, Len : longint) : boolean; virtual;
-  function GetSubStr(ANom: integer; AStr: Pchar) : string; virtual;
-  function GetFullStr(AStr: Pchar) : string; virtual;
-  function GetReplStr(AStr: Pchar; const ARepl: string) : string; virtual;
-  function GetPreSubStr(AStr: Pchar) : string; virtual;
-  function GetPostSubStr(AStr: Pchar) : string; virtual;
-  function ErrorStr : string; virtual;
-  destructor Done; virtual;
- end;
-
- function pcGrepMatch(WildCard, aStr: string; AOptions:integer; ALocale : Pointer): Boolean;
- function pcGrepSub(WildCard, aStr, aRepl: string; AOptions:integer; ALocale : Pointer): string;
-
- function pcFastGrepMatch(WildCard, aStr: string): Boolean;
- function pcFastGrepSub(WildCard, aStr, aRepl: string): string;
-
-{$IFDEF PCRE_5_0}
- function pcGetVersion : pchar;
-{$ENDIF}
-
- function pcError (var pRegExp : Pointer) : Boolean;
- function pcInit  (const Pattern: Shortstring; CaseSens: Boolean) : Pointer;
-
-Const { Options }
- PCRE_CASELESS         = $0001;
- PCRE_MULTILINE        = $0002;
- PCRE_DOTALL           = $0004;
- PCRE_EXTENDED         = $0008;
- PCRE_ANCHORED         = $0010;
- PCRE_DOLLAR_ENDONLY   = $0020;
- PCRE_EXTRA            = $0040;
- PCRE_NOTBOL           = $0080;
- PCRE_NOTEOL           = $0100;
- PCRE_UNGREEDY         = $0200;
- PCRE_NOTEMPTY         = $0400;
-{$IFDEF PCRE_5_0}
- PCRE_UTF8             = $0800;
- PCRE_NO_AUTO_CAPTURE  = $1000;
- PCRE_NO_UTF8_CHECK    = $2000;
- PCRE_AUTO_CALLOUT     = $4000;
- PCRE_PARTIAL          = $8000;
-{$ENDIF}
-{$IFDEF PCRE_7_0}
- PCRE_DFA_SHORTEST     = $00010000;
- PCRE_DFA_RESTART      = $00020000;
- PCRE_FIRSTLINE        = $00040000;
- PCRE_DUPNAMES         = $00080000;
- PCRE_NEWLINE_CR       = $00100000;
- PCRE_NEWLINE_LF       = $00200000;
- PCRE_NEWLINE_CRLF     = $00300000;
- PCRE_NEWLINE_ANY      = $00400000;
- PCRE_NEWLINE_ANYCRLF  = $00500000;
-
- PCRE_NEWLINE_BITS     = PCRE_NEWLINE_CR or PCRE_NEWLINE_LF or PCRE_NEWLINE_ANY;
-
-{$ENDIF}
-{$IFDEF PCRE_7_7}
- PCRE_BSR_ANYCRLF      = $00800000;
- PCRE_BSR_UNICODE      = $01000000;
- PCRE_JAVASCRIPT_COMPAT= $02000000;
-{$ENDIF}
-
- PCRE_COMPILE_ALLOWED_OPTIONS = PCRE_ANCHORED + PCRE_AUTO_CALLOUT + PCRE_CASELESS  +
-				PCRE_DOLLAR_ENDONLY + PCRE_DOTALL + PCRE_EXTENDED  +
-				PCRE_EXTRA + PCRE_MULTILINE + PCRE_NO_AUTO_CAPTURE +
-				PCRE_UNGREEDY + PCRE_UTF8 + PCRE_NO_UTF8_CHECK
-				{$IFDEF PCRE_7_0}
-				+ PCRE_DUPNAMES + PCRE_FIRSTLINE + PCRE_NEWLINE_BITS
-				{$ENDIF}
-				{$IFDEF PCRE_7_7}
-				+ PCRE_BSR_ANYCRLF + PCRE_BSR_UNICODE + PCRE_JAVASCRIPT_COMPAT
-				{$ENDIF}
-				;
-
- PCRE_EXEC_ALLOWED_OPTIONS = PCRE_ANCHORED + PCRE_NOTBOL + PCRE_NOTEOL +
-			     PCRE_NOTEMPTY + PCRE_NO_UTF8_CHECK + PCRE_PARTIAL
-			     {$IFDEF PCRE_7_0}
-			     + PCRE_NEWLINE_BITS
-			     {$ENDIF}
-			     {$IFDEF PCRE_7_7}
-			     + PCRE_BSR_ANYCRLF + PCRE_BSR_UNICODE
-			     {$ENDIF}
-			     ;
-
-{$IFDEF PCRE_7_0}
- PCRE_DFA_EXEC_ALLOWED_OPTIONS = PCRE_ANCHORED + PCRE_NOTBOL + PCRE_NOTEOL +
-				 PCRE_NOTEMPTY + PCRE_NO_UTF8_CHECK + PCRE_PARTIAL +
-				 PCRE_DFA_SHORTEST + PCRE_DFA_RESTART +
-				 PCRE_NEWLINE_BITS
-				 {$IFDEF PCRE_7_7}
-				 + PCRE_BSR_ANYCRLF + PCRE_BSR_UNICODE
-				 {$ENDIF}
-				 ;
-{$ENDIF}
-
-{ Exec-time and get/set-time error codes }
- PCRE_ERROR_NOMATCH        =  -1;
- PCRE_ERROR_NULL	   =  -2;
- PCRE_ERROR_BADOPTION      =  -3;
- PCRE_ERROR_BADMAGIC       =  -4;
- PCRE_ERROR_UNKNOWN_MODE   =  -5;
- PCRE_ERROR_NOMEMORY       =  -6;
- PCRE_ERROR_NOSUBSTRING    =  -7;
-{$IFDEF PCRE_5_0}
- PCRE_ERROR_MATCHLIMIT     =  -8;
- PCRE_ERROR_CALLOUT        =  -9;  { Never used by PCRE itself }
- PCRE_ERROR_BADUTF8        = -10;
- PCRE_ERROR_BADUTF8_OFFSET = -11;
- PCRE_ERROR_PARTIAL        = -12;
- PCRE_ERROR_BADPARTIAL     = -13;
- PCRE_ERROR_INTERNAL       = -14;
- PCRE_ERROR_BADCOUNT       = -15;
-{$ENDIF}
-{$IFDEF PCRE_7_0}
- PCRE_ERROR_DFA_UITEM      = -16;
- PCRE_ERROR_DFA_UCOND      = -17;
- PCRE_ERROR_DFA_UMLIMIT    = -18;
- PCRE_ERROR_DFA_WSSIZE     = -19;
- PCRE_ERROR_DFA_RECURSE    = -20;
- PCRE_ERROR_RECURSIONLIMIT = -21;
- PCRE_ERROR_NULLWSLIMIT    = -22;
- PCRE_ERROR_BADNEWLINE     = -23;
-{$ENDIF}
-
-{ Request types for pcre_fullinfo() }
-
- PCRE_INFO_OPTIONS         =  0;
- PCRE_INFO_SIZE 	   =  1;
- PCRE_INFO_CAPTURECOUNT    =  2;
- PCRE_INFO_BACKREFMAX      =  3;
- PCRE_INFO_FIRSTBYTE       =  4;
- PCRE_INFO_FIRSTCHAR       =  4; { For backwards compatibility }
- PCRE_INFO_FIRSTTABLE      =  5;
-{$IFDEF PCRE_5_0}
- PCRE_INFO_LASTLITERAL     =  6;
- PCRE_INFO_NAMEENTRYSIZE   =  7;
- PCRE_INFO_NAMECOUNT       =  8;
- PCRE_INFO_NAMETABLE       =  9;
- PCRE_INFO_STUDYSIZE       = 10;
- PCRE_INFO_DEFAULT_TABLES  = 11;
-{$ENDIF PCRE_5_0}
-{$IFDEF PCRE_7_7}
- PCRE_INFO_OKPARTIAL       = 12;
- PCRE_INFO_JCHANGED        = 13;
- PCRE_INFO_HASCRORLF       = 14;
-{$ENDIF}
-
-{ Request types for pcre_config() }
-{$IFDEF PCRE_5_0}
- PCRE_CONFIG_UTF8       	    = 0;
- PCRE_CONFIG_NEWLINE    	    = 1;
- PCRE_CONFIG_LINK_SIZE  	    = 2;
- PCRE_CONFIG_POSIX_MALLOC_THRESHOLD = 3;
- PCRE_CONFIG_MATCH_LIMIT	    = 4;
- PCRE_CONFIG_STACKRECURSE           = 5;
- PCRE_CONFIG_UNICODE_PROPERTIES     = 6;
-{$ENDIF PCRE_5_0}
-{$IFDEF PCRE_7_0}
- PCRE_CONFIG_MATCH_LIMIT_RECURSION  = 7;
-{$ENDIF}
-{$IFDEF PCRE_7_7}
- PCRE_CONFIG_BSR		    = 8;
-{$ENDIF}
-
-{ Bit flags for the pcre_extra structure }
-{$IFDEF PCRE_5_0}
- PCRE_EXTRA_STUDY_DATA  	  = $0001;
- PCRE_EXTRA_MATCH_LIMIT 	  = $0002;
- PCRE_EXTRA_CALLOUT_DATA	  = $0004;
- PCRE_EXTRA_TABLES      	  = $0008;
-{$ENDIF PCRE_5_0}
-{$IFDEF PCRE_7_0}
- PCRE_EXTRA_MATCH_LIMIT_RECURSION = $0010;
-{$ENDIF}
-
-Const
-// DefaultOptions : integer = 0;
- DefaultLocaleTable : pointer = nil;
-
-{$IFDEF PCRE_5_0}
-{ The structure for passing additional data to pcre_exec(). This is defined in
-such as way as to be extensible. Always add new fields at the end, in order to
-remain compatible. }
-
-type ppcre_extra = ^tpcre_extra;
-     tpcre_extra = record
-       flags : longint; 	       { Bits for which fields are set }
-       study_data : pointer;           { Opaque data from pcre_study() }
-       match_limit : longint;          { Maximum number of calls to match() }
-       callout_data : pointer;         { Data passed back in callouts }
-       tables : pointer;	       { Pointer to character tables }
-       match_limit_recursion: longint; { Max recursive calls to match() }
-     end;
-
-type ppcre_callout_block = ^pcre_callout_block;
-     pcre_callout_block = record
-       version,
-  (* ------------------------ Version 0 ------------------------------- *)
-       callout_number : integer;
-       offset_vector : pointer;
-       subject : pchar;
-       subject_length, start_match, current_position, capture_top,
-       capture_last : integer;
-       callout_data : pointer;
-  (* ------------------- Added for Version 1 -------------------------- *)
-       pattern_position, next_item_length : integer;
-     end;
-{$ENDIF PCRE_5_0}
-
-{$OrgName+}
-{$IFDEF VIRTUALPASCAL} {&Cdecl+} {$ENDIF VIRTUALPASCAL}
-
- { local replacement of external pcre memory management functions }
- function pcre_malloc( size : integer ) : pointer;
- procedure pcre_free( {var} p : pointer );
-{$IFDEF PCRE_5_0}
- const pcre_stack_malloc: function ( size : integer ): pointer = pcre_malloc;
-       pcre_stack_free: procedure ( {var} p : pointer ) = pcre_free;
- function pcre_callout(var p : ppcre_callout_block) : integer;
-{$ENDIF PCRE_5_0}
-{$IFDEF VIRTUALPASCAL} {&Cdecl-} {$ENDIF VIRTUALPASCAL}
-
-Implementation
-
-Uses strings, collect, messages, dnapp, commands, advance0, stringsx
-    {$IFDEF VIRTUALPASCAL} ,vpsyslow {$ENDIF VIRTUALPASCAL};
-
-Const
- MAGIC_NUMBER = $50435245; { 'PCRE' }
- MAX_MATCHES = 90; { changed in 3.5 version; should be divisible by 3, was 64}
-
-Type
- PMatchArray = ^TMatchArray;
- TMatchArray = array[0..( MAX_MATCHES * 3 )] of integer;
-
- PRegExpCollection = ^TRegExpCollection;
- TRegExpCollection =  object(TSortedCollection)
-   MaxRegExp : integer;
-   SearchRegExp : shortstring;
-   CompareModeInsert : boolean;
-   constructor Init(AMaxRegExp:integer);
-   procedure FreeItem(P: Pointer); virtual;
-   function  Compare(P1, P2: Pointer): Integer; virtual;
-   function  Find(ARegExp:shortstring;var P: PpcRegExp):boolean; virtual;
-   function CheckNew(ARegExp:shortstring):PpcRegExp;virtual;
- end;
-
-Var
- PRegExpCache : PRegExpCollection;
-
-
-{$IFDEF VIRTUALPASCAL} {&Cdecl+} {$ENDIF VIRTUALPASCAL}
-
- { imported original pcre functions }
-
- function pcre_compile( const pattern : PChar; options : integer;
-			var errorptr : PChar; var erroroffset : integer;
-			const tables : PChar ) : pointer {pcre}; external;
-{$IFDEF PCRE_7_0}
- function pcre_compile2( const pattern : PChar; options : integer;
-			 var errorcodeptr : Integer;
-			 var errorptr : PChar; var erroroffset : integer;
-			 const tables : PChar ) : pointer {pcre}; external;
-{$ENDIF}
-{$IFDEF PCRE_5_0}
- function pcre_config( what : integer; where : pointer) : integer; external;
- function pcre_copy_named_substring( const code : pointer {pcre};
-				     const subject : pchar;
-				     var ovector : integer;
-				     stringcount : integer;
-				     const stringname : pchar;
-				     var buffer : pchar;
-				     size : integer) : integer; external;
- function pcre_copy_substring( const subject : pchar; var ovector : integer;
-			       stringcount, stringnumber : integer;
-			       var buffer : pchar; size : integer )
-			       : integer; external;
- function pcre_exec( const argument_re : pointer {pcre};
-		     const extra_data : pointer {pcre_extra};
-{$ELSE}
- function pcre_exec( const external_re : pointer;
-		     const external_extra : pointer;
-{$ENDIF}
-		     const subject : PChar;
-		     length, start_offset, options : integer;
-		     offsets : pointer;
-		     offsetcount : integer ) : integer; external;
-{$IFDEF PCRE_7_0}
- function pcre_dfa_exec( const argument_re : pointer {pcre};
-			 const extra_data : pointer {pcre_extra};
-			 const subject : pchar;
-			 length, start_offset, options : integer;
-			 offsets : pointer;
-			 offsetcount : integer;
-			 workspace : pointer;
-			 wscount : integer ) : integer; external;
-{$ENDIF}
-{$IFDEF PCRE_5_0}
- procedure pcre_free_substring( const p : pchar ); external;
- procedure pcre_free_substring_list( var p : pchar ); external;
- function pcre_fullinfo( const argument_re : pointer {pcre};
-			 const extra_data : pointer {pcre_extra};
-			 what : integer;
-			 where : pointer ) : integer; external;
- function pcre_get_named_substring( const code : pointer {pcre};
-				    const subject : pchar;
-				    var ovector : integer;
-				    stringcount : integer;
-				    const stringname : pchar;
-				    var stringptr : pchar ) : integer; external;
- function pcre_get_stringnumber( const code : pointer {pcre};
-				 const stringname : pchar ) : integer; external;
- function pcre_get_stringtable_entries( const code : pointer {pcre};
-					const stringname : pchar;
-					var firstptr,
-					    lastptr : pchar ) : integer; external;
- function pcre_get_substring( const subject : pchar; var ovector : integer;
-			      stringcount, stringnumber : integer;
-			      var stringptr : pchar ) : integer; external;
- function pcre_get_substring_list( const subject : pchar; var ovector : integer;
-				   stringcount : integer;
-				   listptr : pointer {const char ***listptr}) : integer; external;
- function pcre_info( const argument_re : pointer {pcre};
-		     var optptr : integer;
-		     var first_byte : integer ) : integer; external;
- function pcre_maketables : pchar; external;
-{$ENDIF}
-{$IFDEF PCRE_7_0}
- function pcre_refcount( const argument_re : pointer {pcre};
-			 adjust : integer ) : pchar; external;
-{$ENDIF}
- function pcre_study( const external_re : pointer {pcre};
-		      options : integer;
-		      var errorptr : PChar ) : pointer {pcre_extra}; external;
-{$IFDEF PCRE_5_0}
- function pcre_version : pchar; external;
-{$ENDIF}
-
- function pcre_malloc( size : integer ) : pointer;
- begin
-  GetMem( result, size );
- end;
-
- procedure pcre_free( {var} p : pointer );
- begin
-  if (p <> nil) then
-    FreeMem( p, 0 );
-  {@p := nil;}
- end;
-
-{$IFDEF PCRE_5_0}
-(* Called from PCRE as a result of the (?C) item. We print out where we are in
-the match. Yield zero unless more callouts than the fail count, or the callout
-data is not zero. *)
-
- function pcre_callout;
- begin
- end;
-{$ENDIF}
-
-{$IFDEF VIRTUALPASCAL} {&Cdecl-} {$ENDIF VIRTUALPASCAL}
-
-// Always include the newest version of the library
-{$IFDEF PCRE_7_7}
-  {$L pcre77.lib}
-{$ELSE}
-  {$IFDEF PCRE_7_0}
-    {$L pcre70.lib}
-  {$ELSE}
-    {$IFDEF PCRE_5_0}
-      {$L pcre50.lib}
-    {$ELSE}
-      {$IFDEF PCRE_3_7}
-	{$L pcre37.lib}
-      {$ENDIF PCRE_3_7}
-    {$ENDIF PCRE_5_0}
-  {$ENDIF PCRE_7_0}
-{$ENDIF PCRE_7_7}
-
-{TpcRegExp}
-
- constructor TpcRegExp.Init(const ARegExp:shortstring; AOptions:integer; ALocale : Pointer);
- var
-  pRegExp : PChar;
- begin
-  RegExp:=ARegExp;
-  RegExpC:=nil;
-  RegExpExt:=nil;
-  Matches:=nil;
-  MatchesCount:=0;
-  Error:=true;
-  ErrorMsg:=nil;
-  ErrorPos:=0;
-  RunTimeOptions := 0;
-  if length(RegExp) < 255 then
-   begin
-    RegExp[length(RegExp)+1]:=#0;
-    pRegExp:=@RegExp[1];
-   end
-  else
-   begin
-    GetMem(pRegExp,length(RegExp)+1);
-    pRegExp:=strpcopy(pRegExp,RegExp);
-   end;
-  RegExpC := pcre_compile( pRegExp,
-			   AOptions and PCRE_COMPILE_ALLOWED_OPTIONS,
-			   ErrorMsg, ErrorPos, ALocale);
-  if length(RegExp) = 255 then
-   StrDispose(pRegExp);
-  if RegExpC = nil then
-   exit;
-  ErrorMsg:=nil;
-  RegExpExt := pcre_study( RegExpC, 0, ErrorMsg );
-  if (RegExpExt = nil) and (ErrorMsg <> nil) then
-   begin
-    pcre_free(RegExpC);
-    exit;
-   end;
-  GetMem(Matches,SizeOf(TMatchArray));
-  Error:=false;
- end;
-
- destructor TpcRegExp.Done;
- begin
-  if RegExpC <> nil then
-    pcre_free(RegExpC);
-  if RegExpExt <> nil then
-    pcre_free(RegExpExt);
-  if Matches <> nil then
-    FreeMem(Matches,SizeOf(TMatchArray));
- end;
-
- function TpcRegExp.SearchNext( AStr: Pchar; ALen : longint ) : boolean;
- var Options: Integer;
- begin // must handle PCRE_ERROR_PARTIAL here
-  Options := (RunTimeOptions or startup.MiscMultiData.cfgRegEx.DefaultOptions) and
-	     PCRE_EXEC_ALLOWED_OPTIONS;
-  if MatchesCount > 0 then
-    MatchesCount:=pcre_exec( RegExpC, RegExpExt, AStr, ALen, PMatchArray(Matches)^[1],
-			     Options, Matches, MAX_MATCHES ) else
-    MatchesCount:=pcre_exec( RegExpC, RegExpExt, AStr, ALen, 0,
-			     Options, Matches, MAX_MATCHES );
-{  if MatchesCount = 0 then
-    MatchesCount := MatchesCount div 3;}
-  PartialMatch := MatchesCount = PCRE_ERROR_PARTIAL;
-  SearchNext := MatchesCount > 0;
- end;
-
- function TpcRegExp.Search( AStr: Pchar; ALen : longint):boolean;
- begin
-  MatchesCount:=0;
-  Search:=SearchNext(AStr,ALen);
-  SourceLen:=ALen;
- end;
-
- function TpcRegExp.SearchOfs( AStr: Pchar; ALen, AOfs: longint ) : boolean;
- var Options: Integer;
- begin
-  MatchesCount:=0;
-  Options := (RunTimeOptions or startup.MiscMultiData.cfgRegEx.DefaultOptions) and
-	     PCRE_EXEC_ALLOWED_OPTIONS;
-  MatchesCount:=pcre_exec( RegExpC, RegExpExt, AStr, ALen, AOfs,
-			   Options, Matches, MAX_MATCHES );
-  PartialMatch := MatchesCount = PCRE_ERROR_PARTIAL;
-  SearchOfs := MatchesCount > 0;
-  SourceLen := ALen-AOfs;
- end;
-
- function TpcRegExp.MatchSub(ANom:integer; var Pos,Len:longint):boolean;
- begin
-  if (MatchesCount > 0) and (ANom <= (MatchesCount-1)) then
-   begin
-    ANom:=ANom*2;
-    Pos:=PMatchArray(Matches)^[ANom];
-    Len:=PMatchArray(Matches)^[ANom+1]-Pos;
-    MatchSub:=true;
-   end
-  else
-   MatchSub:=false;
- end;
-
- function TpcRegExp.MatchFull(var Pos,Len:longint):boolean;
- begin
-  MatchFull:=MatchSub(0,Pos,Len);
- end;
-
- function TpcRegExp.GetSubStr(ANom: integer; AStr: Pchar):string;
- var
-  s: ansistring;
-  pos,len: longint;
- begin
-  s:='';
-  if MatchSub(ANom, pos, len) then
-   begin
-    setlength(s, len);
-    Move(AStr[pos], s[1], len);
-   end;
-  GetSubStr:=s;
- end;
-
- function TpcRegExp.GetPreSubStr(AStr: Pchar):string;
- var
-  s: ansistring;
-  l: longint;
- begin
-  s:='';
-  if (MatchesCount > 0) then
-   begin
-    l:=PMatchArray(Matches)^[0]-1;
-    if l > 0 then
-     begin
-      setlength(s,l);
-      Move(AStr[1],s[1],l);
-     end;
-   end;
-  GetPreSubStr:=s;
- end;
-
- function TpcRegExp.GetPostSubStr(AStr: Pchar):string;
- var
-  s: ansistring;
-  l: longint;
-  ANom: integer;
- begin
-  s:='';
-  if (MatchesCount > 0) then
-   begin
-    ANom:=(MatchesCount-1){*2} shl 1;
-    l:=SourceLen-PMatchArray(Matches)^[ANom+1]+1;
-    if l > 0 then
-     begin
-      setlength(s,l);
-      Move(AStr[PMatchArray(Matches)^[ANom+1]],s[1],l);
-     end;
-   end;
-  GetPostSubStr:=s;
- end;
-
-
- function TpcRegExp.GetFullStr(AStr: Pchar):string;
- var
-  s: ansistring;
-  l: longint;
- begin
-  GetFullStr:=GetSubStr(0,AStr);
- end;
-
- function TpcRegExp.GetReplStr(AStr: Pchar; const ARepl: string):string;
- var
-  s: ansistring;
-  l,i,lasti: longint;
- begin
-  l:=length(ARepl);
-  i:=1;
-  lasti:=1;
-  s:='';
-  while i <= l do
-   begin
-    case ARepl[i] of
-     '\' :
-      begin
-       if i < l then
-	begin
-	 s:=s+copy(ARepl,lasti,i-lasti){+ARepl[i+1]};
-	 {AH 17-10-05 support for POSIX \1-\9 backreferences}
-	 case ARepl[i+1] of
-	  '0' : s:=s+GetFullStr(AStr);
-	  '1'..'9' : s:=s+GetSubStr(ord(ARepl[i+1])-ord('0'),AStr);
-	  else s:=s+ARepl[i+1]; // copy the escaped character
-	 end;
-	end;
-       inc(i);
-       lasti:=i+1;
-      end;
-     '$' :
-      begin
-       if i < l then
-	begin
-	 s:=s+copy(ARepl,lasti,i-lasti);
-	 case ARepl[i+1] of
-	  '&' : s:=s+GetFullStr(AStr);
-	  '1'..'9' : s:=s+GetSubStr(ord(ARepl[i+1])-ord('0'),AStr);
-	  '`' : s:=s+GetPreSubStr(AStr);
-	  #39 : s:=s+GetPostSubStr(AStr);
-	 end;
-	end;
-       inc(i);
-       lasti:=i+1;
-      end;
-    end;
-    inc(i);
-   end;
-  if lasti <= {AH 25-10-2004 added =, else l==1 won't work} l then
-    s:=s+copy(ARepl,lasti,l-lasti+1);
-  GetReplStr:=s;
- end;
-
- function TpcRegExp.ErrorStr:string;
-  begin
-   ErrorStr:=StrPas(ErrorMsg);
-  end;
-
-{TRegExpCollection}
-
-constructor TRegExpCollection.Init(AMaxRegExp: integer);
-begin
- Inherited Init(1,1);
- MaxRegExp:=AMaxRegExp;
- CompareModeInsert:=true;
-end;
-
-procedure TRegExpCollection.FreeItem(P: Pointer);
-begin
- if P <> nil then
-  begin
-   Dispose(PpcRegExp(P),Done);
-  end;
-end;
-
-function  TRegExpCollection.Compare(P1, P2: Pointer): Integer;
-//var
-// l,l1,l2,i : byte;
-//// wPos: pchar;
-begin
- if CompareModeInsert then
-  begin
-//   l1:=length(PpcRegExp(P1)^.RegExp);
-//   l2:=length(PpcRegExp(P2)^.RegExp);
-//   if l1 > l2 then l:=l2 else
-//      	     l:=l1;
-//   for i:=1 to l do
-//     if PpcRegExp(P1).RegExp[i] <> PpcRegExp(P2).RegExp[i] then break;
-//   if i <=l then
-//     Compare:=ord(PpcRegExp(P1).RegExp[i])-ord(PpcRegExp(P2).RegExp[i]) else
-//     Compare:=l1-l2;
-    Compare := stringsx.PasStrCmp(PpcRegExp(P1).RegExp, PpcRegExp(P2).RegExp, False);
-  end
- else
-  begin
-//   l1:=length(PpcRegExp(P1)^.RegExp);
-//   l2:=length(SearchRegExp);
-//   if l1 > l2 then l:=l2 else
-//      	     l:=l1;
-//   for i:=1 to l do
-//     if PpcRegExp(P1).RegExp[i] <> SearchRegExp[i] then
-//     begin
-//       Compare:=ord(PpcRegExp(P1).RegExp[i])-ord(SearchRegExp[i]);
-//       break;
-//     end;
-//   if i > l then Compare:=l1-l2;
-    Compare := stringsx.PasStrCmp(PpcRegExp(P1).RegExp, SearchRegExp, False);
-  end;
-end;
-
-function  TRegExpCollection.Find(ARegExp:shortstring;var P: PpcRegExp):boolean;
-var I : integer;
-begin
- CompareModeInsert:=false;
- SearchRegExp:=ARegExp;
- if Search(nil,I) then
-  begin
-   P:=PpcRegExp(At(I));
-   Find:=true;
-  end
- else
-  begin
-   P:=nil;
-   Find:=false;
-  end;
- CompareModeInsert:=true;
-end;
-
-function TRegExpCollection.CheckNew(ARegExp:shortstring):PpcRegExp;
-var
- P : PpcRegExp;
-begin
- if not Find(ARegExp,P) then
-  begin
-   if Count = MaxRegExp then
-    AtFree(0);
-   P:=New(ppcRegExp,Init(ARegExp,PCRE_CASELESS,nil));
-   Insert(P);
-  end;
- CheckNew:=P;
-end;
-
-function pcGrepMatch(WildCard, aStr: string; AOptions:integer; ALocale : Pointer): Boolean;
-var
- PpcRE:PpcRegExp;
-begin
- PpcRE:=New(ppcRegExp,Init(WildCard,AOptions,Alocale));
- pcGrepMatch:=PpcRE^.Search(pchar(AStr),Length(AStr));
- Dispose(PpcRE,Done);
-end;
-
-function pcGrepSub(WildCard, aStr, aRepl: string; AOptions:integer; ALocale : Pointer): string;
-var
- PpcRE:PpcRegExp;
-begin
- PpcRE:=New(ppcRegExp,Init(WildCard,AOptions,Alocale));
- if PpcRE^.Search(pchar(AStr),Length(AStr)) then
-  pcGrepSub:=PpcRE^.GetReplStr(pchar(AStr),ARepl)
- else
-  pcGrepSub:='';
- Dispose(PpcRE,Done);
-end;
-
-function pcFastGrepMatch(WildCard, aStr: string): Boolean;
-var
- PpcRE:PpcRegExp;
-begin
- PpcRE:=PRegExpCache^.CheckNew(WildCard);
- pcFastGrepMatch:=PpcRE^.Search(pchar(AStr),Length(AStr));
-end;
-
-function pcFastGrepSub(WildCard, aStr, aRepl: string): string;
-var
- PpcRE:PpcRegExp;
-begin
- PpcRE:=PRegExpCache^.CheckNew(WildCard);
- if PpcRE^.Search(pchar(AStr),Length(AStr)) then
-  pcFastGrepSub:=PpcRE^.GetReplStr(pchar(AStr),ARepl)
- else
-  pcFastGrepSub:='';
-end;
-
-{$IFDEF PCRE_5_0}
-function pcGetVersion : pchar; assembler; {$FRAME-}{$USES none}
-asm
-  call pcre_version
-end;
-{$ENDIF PCRE_5_0}
-
-function pcError;
-var P: ppcRegExp absolute pRegExp;
-begin
-  Result := (P = nil) or P^.Error;
-  If Result and (P <> nil) then
-  begin
-{     if P^.ErrorPos = 0 then
-      MessageBox(GetString(erRegExpCompile)+'"'+P^.ErrorStr+'"', nil,mfConfirmation+mfOkButton)
-    else}
-      MessageBox(GetString(erRegExpCompile)+'"'+P^.ErrorStr+'"'+GetString(erRegExpCompPos),
-		 @P^.ErrorPos,mfConfirmation+mfOkButton);
-    Dispose(P, Done);
-    P:=nil;
-  end;
-end;
-
-function pcInit;
-var Options : Integer;
-begin
-  If CaseSens then Options := 0 else Options := PCRE_CASELESS;
-  Result := New( PpcRegExp, Init( Pattern,
-				  {DefaultOptions}
-				  startup.MiscMultiData.cfgRegEx.DefaultOptions or Options,
-				  DefaultLocaleTable) );
-end;
-
-Initialization
- PRegExpCache:=New(PRegExpCollection,Init(64));
-Finalization
- Dispose(PRegExpCache,Done);
-End.
+{
+  pcRegExp - Perl compatible regular expressions for Virtual Pascal
+  (c) 2001 Peter S. Voronov aka Chem O'Dun <petervrn@yahoo.com>
+
+  Based on PCRE library interface unit for Virtual Pascal.
+  (c) 2001 Alexander Tokarev <dwalin@dwalin.ru>
+
+  The current PCRE version is: 3.7
+
+  This software may be distributed under the terms of the modified BSD license
+  Copyright (c) 2001, Alexander Tokarev
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without
+  modification, are permitted provided that the following conditions are met:
+
+    * Redistributions of source code must retain the above copyright notice,
+      this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright notice,
+      this list of conditions and the following disclaimer in the documentation
+      and/or other materials provided with the distribution.
+    * Neither the name of the <ORGANIZATION> nor the names of its contributors
+      may be used to endorse or promote products derived from this software without
+      specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+  The PCRE library is written by: Philip Hazel <ph10@cam.ac.uk>
+  Copyright (c) 1997-2004 University of Cambridge
+
+  AngelsHolocaust 4-11-04 updated to use version v5.0
+  (INFO: this is regex-directed, NFA)
+  AH:  9-11-04 - pcre_free: removed var, pcre already gives the ptr, now
+			    everything works as it should (no more crashes)
+		 -> removed CheckRegExp because pcre handles errors perfectly
+      10-11-04 - added pcError (errorhandling), pcInit
+      13-11-04 - removed the ErrorPos = 0 check -> always print erroroffset
+      17-10-05 - support for \1-\9 backreferences in TpcRegExp.GetReplStr
+      17-02-06 - added RunTimeOptions: caller can set options while searching
+      19-02-06 - added SearchOfs(): let PCRE use the complete string and offset
+		 into the string itself
+      20-12-06 - support for version 7.0
+      27.08.08 - support for v7.7
+}
+
+{$H+} {$DEFINE PCRE_3_7} {$DEFINE PCRE_5_0} {$DEFINE PCRE_7_0} {$DEFINE PCRE_7_7}
+
+Unit pcregexp;
+
+Interface
+
+uses objects;
+
+Type
+ PpcRegExp = ^TpcRegExp;
+// TpcRegExp = object
+ TpcRegExp = object(TObject)
+  MatchesCount: integer;
+  RegExpC, RegExpExt : Pointer;
+  Matches:Pointer;
+  RegExp: shortstring;
+  SourceLen: integer;
+  PartialMatch : boolean;
+  Error : boolean;
+  ErrorMsg : Pchar;
+  ErrorPos : integer;
+  RunTimeOptions: Integer; // options which can be set by the caller
+  constructor Init(const ARegExp : shortstring; AOptions : integer; ALocale : Pointer);
+  function Search(AStr: Pchar; ALen : longint) : boolean; virtual;
+  function SearchNext( AStr: Pchar; ALen : longint) : boolean; virtual;
+  function SearchOfs ( AStr: Pchar; ALen, AOfs : longint) : boolean; virtual;
+  function MatchSub(ANom: integer; var Pos, Len : longint) : boolean; virtual;
+  function MatchFull(var Pos, Len : longint) : boolean; virtual;
+  function GetSubStr(ANom: integer; AStr: Pchar) : string; virtual;
+  function GetFullStr(AStr: Pchar) : string; virtual;
+  function GetReplStr(AStr: Pchar; const ARepl: string) : string; virtual;
+  function GetPreSubStr(AStr: Pchar) : string; virtual;
+  function GetPostSubStr(AStr: Pchar) : string; virtual;
+  function ErrorStr : string; virtual;
+  destructor Done; virtual;
+ end;
+
+ function pcGrepMatch(WildCard, aStr: string; AOptions:integer; ALocale : Pointer): Boolean;
+ function pcGrepSub(WildCard, aStr, aRepl: string; AOptions:integer; ALocale : Pointer): string;
+
+ function pcFastGrepMatch(WildCard, aStr: string): Boolean;
+ function pcFastGrepSub(WildCard, aStr, aRepl: string): string;
+
+{$IFDEF PCRE_5_0}
+ function pcGetVersion : pchar;
+{$ENDIF}
+
+ function pcError (var pRegExp : Pointer) : Boolean;
+ function pcInit  (const Pattern: Shortstring; CaseSens: Boolean) : Pointer;
+
+Const { Options }
+ PCRE_CASELESS         = $0001;
+ PCRE_MULTILINE        = $0002;
+ PCRE_DOTALL           = $0004;
+ PCRE_EXTENDED         = $0008;
+ PCRE_ANCHORED         = $0010;
+ PCRE_DOLLAR_ENDONLY   = $0020;
+ PCRE_EXTRA            = $0040;
+ PCRE_NOTBOL           = $0080;
+ PCRE_NOTEOL           = $0100;
+ PCRE_UNGREEDY         = $0200;
+ PCRE_NOTEMPTY         = $0400;
+{$IFDEF PCRE_5_0}
+ PCRE_UTF8             = $0800;
+ PCRE_NO_AUTO_CAPTURE  = $1000;
+ PCRE_NO_UTF8_CHECK    = $2000;
+ PCRE_AUTO_CALLOUT     = $4000;
+ PCRE_PARTIAL          = $8000;
+{$ENDIF}
+{$IFDEF PCRE_7_0}
+ PCRE_DFA_SHORTEST     = $00010000;
+ PCRE_DFA_RESTART      = $00020000;
+ PCRE_FIRSTLINE        = $00040000;
+ PCRE_DUPNAMES         = $00080000;
+ PCRE_NEWLINE_CR       = $00100000;
+ PCRE_NEWLINE_LF       = $00200000;
+ PCRE_NEWLINE_CRLF     = $00300000;
+ PCRE_NEWLINE_ANY      = $00400000;
+ PCRE_NEWLINE_ANYCRLF  = $00500000;
+
+ PCRE_NEWLINE_BITS     = PCRE_NEWLINE_CR or PCRE_NEWLINE_LF or PCRE_NEWLINE_ANY;
+
+{$ENDIF}
+{$IFDEF PCRE_7_7}
+ PCRE_BSR_ANYCRLF      = $00800000;
+ PCRE_BSR_UNICODE      = $01000000;
+ PCRE_JAVASCRIPT_COMPAT= $02000000;
+{$ENDIF}
+
+ PCRE_COMPILE_ALLOWED_OPTIONS = PCRE_ANCHORED + PCRE_AUTO_CALLOUT + PCRE_CASELESS  +
+				PCRE_DOLLAR_ENDONLY + PCRE_DOTALL + PCRE_EXTENDED  +
+				PCRE_EXTRA + PCRE_MULTILINE + PCRE_NO_AUTO_CAPTURE +
+				PCRE_UNGREEDY + PCRE_UTF8 + PCRE_NO_UTF8_CHECK
+				{$IFDEF PCRE_7_0}
+				+ PCRE_DUPNAMES + PCRE_FIRSTLINE + PCRE_NEWLINE_BITS
+				{$ENDIF}
+				{$IFDEF PCRE_7_7}
+				+ PCRE_BSR_ANYCRLF + PCRE_BSR_UNICODE + PCRE_JAVASCRIPT_COMPAT
+				{$ENDIF}
+				;
+
+ PCRE_EXEC_ALLOWED_OPTIONS = PCRE_ANCHORED + PCRE_NOTBOL + PCRE_NOTEOL +
+			     PCRE_NOTEMPTY + PCRE_NO_UTF8_CHECK + PCRE_PARTIAL
+			     {$IFDEF PCRE_7_0}
+			     + PCRE_NEWLINE_BITS
+			     {$ENDIF}
+			     {$IFDEF PCRE_7_7}
+			     + PCRE_BSR_ANYCRLF + PCRE_BSR_UNICODE
+			     {$ENDIF}
+			     ;
+
+{$IFDEF PCRE_7_0}
+ PCRE_DFA_EXEC_ALLOWED_OPTIONS = PCRE_ANCHORED + PCRE_NOTBOL + PCRE_NOTEOL +
+				 PCRE_NOTEMPTY + PCRE_NO_UTF8_CHECK + PCRE_PARTIAL +
+				 PCRE_DFA_SHORTEST + PCRE_DFA_RESTART +
+				 PCRE_NEWLINE_BITS
+				 {$IFDEF PCRE_7_7}
+				 + PCRE_BSR_ANYCRLF + PCRE_BSR_UNICODE
+				 {$ENDIF}
+				 ;
+{$ENDIF}
+
+{ Exec-time and get/set-time error codes }
+ PCRE_ERROR_NOMATCH        =  -1;
+ PCRE_ERROR_NULL	   =  -2;
+ PCRE_ERROR_BADOPTION      =  -3;
+ PCRE_ERROR_BADMAGIC       =  -4;
+ PCRE_ERROR_UNKNOWN_MODE   =  -5;
+ PCRE_ERROR_NOMEMORY       =  -6;
+ PCRE_ERROR_NOSUBSTRING    =  -7;
+{$IFDEF PCRE_5_0}
+ PCRE_ERROR_MATCHLIMIT     =  -8;
+ PCRE_ERROR_CALLOUT        =  -9;  { Never used by PCRE itself }
+ PCRE_ERROR_BADUTF8        = -10;
+ PCRE_ERROR_BADUTF8_OFFSET = -11;
+ PCRE_ERROR_PARTIAL        = -12;
+ PCRE_ERROR_BADPARTIAL     = -13;
+ PCRE_ERROR_INTERNAL       = -14;
+ PCRE_ERROR_BADCOUNT       = -15;
+{$ENDIF}
+{$IFDEF PCRE_7_0}
+ PCRE_ERROR_DFA_UITEM      = -16;
+ PCRE_ERROR_DFA_UCOND      = -17;
+ PCRE_ERROR_DFA_UMLIMIT    = -18;
+ PCRE_ERROR_DFA_WSSIZE     = -19;
+ PCRE_ERROR_DFA_RECURSE    = -20;
+ PCRE_ERROR_RECURSIONLIMIT = -21;
+ PCRE_ERROR_NULLWSLIMIT    = -22;
+ PCRE_ERROR_BADNEWLINE     = -23;
+{$ENDIF}
+
+{ Request types for pcre_fullinfo() }
+
+ PCRE_INFO_OPTIONS         =  0;
+ PCRE_INFO_SIZE 	   =  1;
+ PCRE_INFO_CAPTURECOUNT    =  2;
+ PCRE_INFO_BACKREFMAX      =  3;
+ PCRE_INFO_FIRSTBYTE       =  4;
+ PCRE_INFO_FIRSTCHAR       =  4; { For backwards compatibility }
+ PCRE_INFO_FIRSTTABLE      =  5;
+{$IFDEF PCRE_5_0}
+ PCRE_INFO_LASTLITERAL     =  6;
+ PCRE_INFO_NAMEENTRYSIZE   =  7;
+ PCRE_INFO_NAMECOUNT       =  8;
+ PCRE_INFO_NAMETABLE       =  9;
+ PCRE_INFO_STUDYSIZE       = 10;
+ PCRE_INFO_DEFAULT_TABLES  = 11;
+{$ENDIF PCRE_5_0}
+{$IFDEF PCRE_7_7}
+ PCRE_INFO_OKPARTIAL       = 12;
+ PCRE_INFO_JCHANGED        = 13;
+ PCRE_INFO_HASCRORLF       = 14;
+{$ENDIF}
+
+{ Request types for pcre_config() }
+{$IFDEF PCRE_5_0}
+ PCRE_CONFIG_UTF8       	    = 0;
+ PCRE_CONFIG_NEWLINE    	    = 1;
+ PCRE_CONFIG_LINK_SIZE  	    = 2;
+ PCRE_CONFIG_POSIX_MALLOC_THRESHOLD = 3;
+ PCRE_CONFIG_MATCH_LIMIT	    = 4;
+ PCRE_CONFIG_STACKRECURSE           = 5;
+ PCRE_CONFIG_UNICODE_PROPERTIES     = 6;
+{$ENDIF PCRE_5_0}
+{$IFDEF PCRE_7_0}
+ PCRE_CONFIG_MATCH_LIMIT_RECURSION  = 7;
+{$ENDIF}
+{$IFDEF PCRE_7_7}
+ PCRE_CONFIG_BSR		    = 8;
+{$ENDIF}
+
+{ Bit flags for the pcre_extra structure }
+{$IFDEF PCRE_5_0}
+ PCRE_EXTRA_STUDY_DATA  	  = $0001;
+ PCRE_EXTRA_MATCH_LIMIT 	  = $0002;
+ PCRE_EXTRA_CALLOUT_DATA	  = $0004;
+ PCRE_EXTRA_TABLES      	  = $0008;
+{$ENDIF PCRE_5_0}
+{$IFDEF PCRE_7_0}
+ PCRE_EXTRA_MATCH_LIMIT_RECURSION = $0010;
+{$ENDIF}
+
+Const
+// DefaultOptions : integer = 0;
+ DefaultLocaleTable : pointer = nil;
+
+{$IFDEF PCRE_5_0}
+{ The structure for passing additional data to pcre_exec(). This is defined in
+such as way as to be extensible. Always add new fields at the end, in order to
+remain compatible. }
+
+type ppcre_extra = ^tpcre_extra;
+     tpcre_extra = record
+       flags : longint; 	       { Bits for which fields are set }
+       study_data : pointer;           { Opaque data from pcre_study() }
+       match_limit : longint;          { Maximum number of calls to match() }
+       callout_data : pointer;         { Data passed back in callouts }
+       tables : pointer;	       { Pointer to character tables }
+       match_limit_recursion: longint; { Max recursive calls to match() }
+     end;
+
+type ppcre_callout_block = ^pcre_callout_block;
+     pcre_callout_block = record
+       version,
+  (* ------------------------ Version 0 ------------------------------- *)
+       callout_number : integer;
+       offset_vector : pointer;
+       subject : pchar;
+       subject_length, start_match, current_position, capture_top,
+       capture_last : integer;
+       callout_data : pointer;
+  (* ------------------- Added for Version 1 -------------------------- *)
+       pattern_position, next_item_length : integer;
+     end;
+{$ENDIF PCRE_5_0}
+
+{$OrgName+}
+{$IFDEF VIRTUALPASCAL} {&Cdecl+} {$ENDIF VIRTUALPASCAL}
+
+ { local replacement of external pcre memory management functions }
+ function pcre_malloc( size : integer ) : pointer;
+ procedure pcre_free( {var} p : pointer );
+{$IFDEF PCRE_5_0}
+ const pcre_stack_malloc: function ( size : integer ): pointer = pcre_malloc;
+       pcre_stack_free: procedure ( {var} p : pointer ) = pcre_free;
+ function pcre_callout(var p : ppcre_callout_block) : integer;
+{$ENDIF PCRE_5_0}
+{$IFDEF VIRTUALPASCAL} {&Cdecl-} {$ENDIF VIRTUALPASCAL}
+
+Implementation
+
+Uses strings, collect, messages, dnapp, commands, advance0, stringsx
+    {$IFDEF VIRTUALPASCAL} ,vpsyslow {$ENDIF VIRTUALPASCAL};
+
+Const
+ MAGIC_NUMBER = $50435245; { 'PCRE' }
+ MAX_MATCHES = 90; { changed in 3.5 version; should be divisible by 3, was 64}
+
+Type
+ PMatchArray = ^TMatchArray;
+ TMatchArray = array[0..( MAX_MATCHES * 3 )] of integer;
+
+ PRegExpCollection = ^TRegExpCollection;
+ TRegExpCollection =  object(TSortedCollection)
+   MaxRegExp : integer;
+   SearchRegExp : shortstring;
+   CompareModeInsert : boolean;
+   constructor Init(AMaxRegExp:integer);
+   procedure FreeItem(P: Pointer); virtual;
+   function  Compare(P1, P2: Pointer): Integer; virtual;
+   function  Find(ARegExp:shortstring;var P: PpcRegExp):boolean; virtual;
+   function CheckNew(ARegExp:shortstring):PpcRegExp;virtual;
+ end;
+
+Var
+ PRegExpCache : PRegExpCollection;
+
+
+{$IFDEF VIRTUALPASCAL} {&Cdecl+} {$ENDIF VIRTUALPASCAL}
+
+ { imported original pcre functions }
+
+ function pcre_compile( const pattern : PChar; options : integer;
+			var errorptr : PChar; var erroroffset : integer;
+			const tables : PChar ) : pointer {pcre}; external;
+{$IFDEF PCRE_7_0}
+ function pcre_compile2( const pattern : PChar; options : integer;
+			 var errorcodeptr : Integer;
+			 var errorptr : PChar; var erroroffset : integer;
+			 const tables : PChar ) : pointer {pcre}; external;
+{$ENDIF}
+{$IFDEF PCRE_5_0}
+ function pcre_config( what : integer; where : pointer) : integer; external;
+ function pcre_copy_named_substring( const code : pointer {pcre};
+				     const subject : pchar;
+				     var ovector : integer;
+				     stringcount : integer;
+				     const stringname : pchar;
+				     var buffer : pchar;
+				     size : integer) : integer; external;
+ function pcre_copy_substring( const subject : pchar; var ovector : integer;
+			       stringcount, stringnumber : integer;
+			       var buffer : pchar; size : integer )
+			       : integer; external;
+ function pcre_exec( const argument_re : pointer {pcre};
+		     const extra_data : pointer {pcre_extra};
+{$ELSE}
+ function pcre_exec( const external_re : pointer;
+		     const external_extra : pointer;
+{$ENDIF}
+		     const subject : PChar;
+		     length, start_offset, options : integer;
+		     offsets : pointer;
+		     offsetcount : integer ) : integer; external;
+{$IFDEF PCRE_7_0}
+ function pcre_dfa_exec( const argument_re : pointer {pcre};
+			 const extra_data : pointer {pcre_extra};
+			 const subject : pchar;
+			 length, start_offset, options : integer;
+			 offsets : pointer;
+			 offsetcount : integer;
+			 workspace : pointer;
+			 wscount : integer ) : integer; external;
+{$ENDIF}
+{$IFDEF PCRE_5_0}
+ procedure pcre_free_substring( const p : pchar ); external;
+ procedure pcre_free_substring_list( var p : pchar ); external;
+ function pcre_fullinfo( const argument_re : pointer {pcre};
+			 const extra_data : pointer {pcre_extra};
+			 what : integer;
+			 where : pointer ) : integer; external;
+ function pcre_get_named_substring( const code : pointer {pcre};
+				    const subject : pchar;
+				    var ovector : integer;
+				    stringcount : integer;
+				    const stringname : pchar;
+				    var stringptr : pchar ) : integer; external;
+ function pcre_get_stringnumber( const code : pointer {pcre};
+				 const stringname : pchar ) : integer; external;
+ function pcre_get_stringtable_entries( const code : pointer {pcre};
+					const stringname : pchar;
+					var firstptr,
+					    lastptr : pchar ) : integer; external;
+ function pcre_get_substring( const subject : pchar; var ovector : integer;
+			      stringcount, stringnumber : integer;
+			      var stringptr : pchar ) : integer; external;
+ function pcre_get_substring_list( const subject : pchar; var ovector : integer;
+				   stringcount : integer;
+				   listptr : pointer {const char ***listptr}) : integer; external;
+ function pcre_info( const argument_re : pointer {pcre};
+		     var optptr : integer;
+		     var first_byte : integer ) : integer; external;
+ function pcre_maketables : pchar; external;
+{$ENDIF}
+{$IFDEF PCRE_7_0}
+ function pcre_refcount( const argument_re : pointer {pcre};
+			 adjust : integer ) : pchar; external;
+{$ENDIF}
+ function pcre_study( const external_re : pointer {pcre};
+		      options : integer;
+		      var errorptr : PChar ) : pointer {pcre_extra}; external;
+{$IFDEF PCRE_5_0}
+ function pcre_version : pchar; external;
+{$ENDIF}
+
+ function pcre_malloc( size : integer ) : pointer;
+ begin
+  GetMem( result, size );
+ end;
+
+ procedure pcre_free( {var} p : pointer );
+ begin
+  if (p <> nil) then
+    FreeMem( p, 0 );
+  {@p := nil;}
+ end;
+
+{$IFDEF PCRE_5_0}
+(* Called from PCRE as a result of the (?C) item. We print out where we are in
+the match. Yield zero unless more callouts than the fail count, or the callout
+data is not zero. *)
+
+ function pcre_callout;
+ begin
+ end;
+{$ENDIF}
+
+{$IFDEF VIRTUALPASCAL} {&Cdecl-} {$ENDIF VIRTUALPASCAL}
+
+// Always include the newest version of the library
+{$IFDEF PCRE_7_7}
+  {$L pcre77.lib}
+{$ELSE}
+  {$IFDEF PCRE_7_0}
+    {$L pcre70.lib}
+  {$ELSE}
+    {$IFDEF PCRE_5_0}
+      {$L pcre50.lib}
+    {$ELSE}
+      {$IFDEF PCRE_3_7}
+	{$L pcre37.lib}
+      {$ENDIF PCRE_3_7}
+    {$ENDIF PCRE_5_0}
+  {$ENDIF PCRE_7_0}
+{$ENDIF PCRE_7_7}
+
+{TpcRegExp}
+
+ constructor TpcRegExp.Init(const ARegExp:shortstring; AOptions:integer; ALocale : Pointer);
+ var
+  pRegExp : PChar;
+ begin
+  RegExp:=ARegExp;
+  RegExpC:=nil;
+  RegExpExt:=nil;
+  Matches:=nil;
+  MatchesCount:=0;
+  Error:=true;
+  ErrorMsg:=nil;
+  ErrorPos:=0;
+  RunTimeOptions := 0;
+  if length(RegExp) < 255 then
+   begin
+    RegExp[length(RegExp)+1]:=#0;
+    pRegExp:=@RegExp[1];
+   end
+  else
+   begin
+    GetMem(pRegExp,length(RegExp)+1);
+    pRegExp:=strpcopy(pRegExp,RegExp);
+   end;
+  RegExpC := pcre_compile( pRegExp,
+			   AOptions and PCRE_COMPILE_ALLOWED_OPTIONS,
+			   ErrorMsg, ErrorPos, ALocale);
+  if length(RegExp) = 255 then
+   StrDispose(pRegExp);
+  if RegExpC = nil then
+   exit;
+  ErrorMsg:=nil;
+  RegExpExt := pcre_study( RegExpC, 0, ErrorMsg );
+  if (RegExpExt = nil) and (ErrorMsg <> nil) then
+   begin
+    pcre_free(RegExpC);
+    exit;
+   end;
+  GetMem(Matches,SizeOf(TMatchArray));
+  Error:=false;
+ end;
+
+ destructor TpcRegExp.Done;
+ begin
+  if RegExpC <> nil then
+    pcre_free(RegExpC);
+  if RegExpExt <> nil then
+    pcre_free(RegExpExt);
+  if Matches <> nil then
+    FreeMem(Matches,SizeOf(TMatchArray));
+ end;
+
+ function TpcRegExp.SearchNext( AStr: Pchar; ALen : longint ) : boolean;
+ var Options: Integer;
+ begin // must handle PCRE_ERROR_PARTIAL here
+  Options := (RunTimeOptions or startup.MiscMultiData.cfgRegEx.DefaultOptions) and
+	     PCRE_EXEC_ALLOWED_OPTIONS;
+  if MatchesCount > 0 then
+    MatchesCount:=pcre_exec( RegExpC, RegExpExt, AStr, ALen, PMatchArray(Matches)^[1],
+			     Options, Matches, MAX_MATCHES ) else
+    MatchesCount:=pcre_exec( RegExpC, RegExpExt, AStr, ALen, 0,
+			     Options, Matches, MAX_MATCHES );
+{  if MatchesCount = 0 then
+    MatchesCount := MatchesCount div 3;}
+  PartialMatch := MatchesCount = PCRE_ERROR_PARTIAL;
+  SearchNext := MatchesCount > 0;
+ end;
+
+ function TpcRegExp.Search( AStr: Pchar; ALen : longint):boolean;
+ begin
+  MatchesCount:=0;
+  Search:=SearchNext(AStr,ALen);
+  SourceLen:=ALen;
+ end;
+
+ function TpcRegExp.SearchOfs( AStr: Pchar; ALen, AOfs: longint ) : boolean;
+ var Options: Integer;
+ begin
+  MatchesCount:=0;
+  Options := (RunTimeOptions or startup.MiscMultiData.cfgRegEx.DefaultOptions) and
+	     PCRE_EXEC_ALLOWED_OPTIONS;
+  MatchesCount:=pcre_exec( RegExpC, RegExpExt, AStr, ALen, AOfs,
+			   Options, Matches, MAX_MATCHES );
+  PartialMatch := MatchesCount = PCRE_ERROR_PARTIAL;
+  SearchOfs := MatchesCount > 0;
+  SourceLen := ALen-AOfs;
+ end;
+
+ function TpcRegExp.MatchSub(ANom:integer; var Pos,Len:longint):boolean;
+ begin
+  if (MatchesCount > 0) and (ANom <= (MatchesCount-1)) then
+   begin
+    ANom:=ANom*2;
+    Pos:=PMatchArray(Matches)^[ANom];
+    Len:=PMatchArray(Matches)^[ANom+1]-Pos;
+    MatchSub:=true;
+   end
+  else
+   MatchSub:=false;
+ end;
+
+ function TpcRegExp.MatchFull(var Pos,Len:longint):boolean;
+ begin
+  MatchFull:=MatchSub(0,Pos,Len);
+ end;
+
+ function TpcRegExp.GetSubStr(ANom: integer; AStr: Pchar):string;
+ var
+  s: ansistring;
+  pos,len: longint;
+ begin
+  s:='';
+  if MatchSub(ANom, pos, len) then
+   begin
+    setlength(s, len);
+    Move(AStr[pos], s[1], len);
+   end;
+  GetSubStr:=s;
+ end;
+
+ function TpcRegExp.GetPreSubStr(AStr: Pchar):string;
+ var
+  s: ansistring;
+  l: longint;
+ begin
+  s:='';
+  if (MatchesCount > 0) then
+   begin
+    l:=PMatchArray(Matches)^[0]-1;
+    if l > 0 then
+     begin
+      setlength(s,l);
+      Move(AStr[1],s[1],l);
+     end;
+   end;
+  GetPreSubStr:=s;
+ end;
+
+ function TpcRegExp.GetPostSubStr(AStr: Pchar):string;
+ var
+  s: ansistring;
+  l: longint;
+  ANom: integer;
+ begin
+  s:='';
+  if (MatchesCount > 0) then
+   begin
+    ANom:=(MatchesCount-1){*2} shl 1;
+    l:=SourceLen-PMatchArray(Matches)^[ANom+1]+1;
+    if l > 0 then
+     begin
+      setlength(s,l);
+      Move(AStr[PMatchArray(Matches)^[ANom+1]],s[1],l);
+     end;
+   end;
+  GetPostSubStr:=s;
+ end;
+
+
+ function TpcRegExp.GetFullStr(AStr: Pchar):string;
+ var
+  s: ansistring;
+  l: longint;
+ begin
+  GetFullStr:=GetSubStr(0,AStr);
+ end;
+
+ function TpcRegExp.GetReplStr(AStr: Pchar; const ARepl: string):string;
+ var
+  s: ansistring;
+  l,i,lasti: longint;
+ begin
+  l:=length(ARepl);
+  i:=1;
+  lasti:=1;
+  s:='';
+  while i <= l do
+   begin
+    case ARepl[i] of
+     '\' :
+      begin
+       if i < l then
+	begin
+	 s:=s+copy(ARepl,lasti,i-lasti){+ARepl[i+1]};
+	 {AH 17-10-05 support for POSIX \1-\9 backreferences}
+	 case ARepl[i+1] of
+	  '0' : s:=s+GetFullStr(AStr);
+	  '1'..'9' : s:=s+GetSubStr(ord(ARepl[i+1])-ord('0'),AStr);
+	  else s:=s+ARepl[i+1]; // copy the escaped character
+	 end;
+	end;
+       inc(i);
+       lasti:=i+1;
+      end;
+     '$' :
+      begin
+       if i < l then
+	begin
+	 s:=s+copy(ARepl,lasti,i-lasti);
+	 case ARepl[i+1] of
+	  '&' : s:=s+GetFullStr(AStr);
+	  '1'..'9' : s:=s+GetSubStr(ord(ARepl[i+1])-ord('0'),AStr);
+	  '`' : s:=s+GetPreSubStr(AStr);
+	  #39 : s:=s+GetPostSubStr(AStr);
+	 end;
+	end;
+       inc(i);
+       lasti:=i+1;
+      end;
+    end;
+    inc(i);
+   end;
+  if lasti <= {AH 25-10-2004 added =, else l==1 won't work} l then
+    s:=s+copy(ARepl,lasti,l-lasti+1);
+  GetReplStr:=s;
+ end;
+
+ function TpcRegExp.ErrorStr:string;
+  begin
+   ErrorStr:=StrPas(ErrorMsg);
+  end;
+
+{TRegExpCollection}
+
+constructor TRegExpCollection.Init(AMaxRegExp: integer);
+begin
+ Inherited Init(1,1);
+ MaxRegExp:=AMaxRegExp;
+ CompareModeInsert:=true;
+end;
+
+procedure TRegExpCollection.FreeItem(P: Pointer);
+begin
+ if P <> nil then
+  begin
+   Dispose(PpcRegExp(P),Done);
+  end;
+end;
+
+function  TRegExpCollection.Compare(P1, P2: Pointer): Integer;
+//var
+// l,l1,l2,i : byte;
+//// wPos: pchar;
+begin
+ if CompareModeInsert then
+  begin
+//   l1:=length(PpcRegExp(P1)^.RegExp);
+//   l2:=length(PpcRegExp(P2)^.RegExp);
+//   if l1 > l2 then l:=l2 else
+//      	     l:=l1;
+//   for i:=1 to l do
+//     if PpcRegExp(P1).RegExp[i] <> PpcRegExp(P2).RegExp[i] then break;
+//   if i <=l then
+//     Compare:=ord(PpcRegExp(P1).RegExp[i])-ord(PpcRegExp(P2).RegExp[i]) else
+//     Compare:=l1-l2;
+    Compare := stringsx.PasStrCmp(PpcRegExp(P1).RegExp, PpcRegExp(P2).RegExp, False);
+  end
+ else
+  begin
+//   l1:=length(PpcRegExp(P1)^.RegExp);
+//   l2:=length(SearchRegExp);
+//   if l1 > l2 then l:=l2 else
+//      	     l:=l1;
+//   for i:=1 to l do
+//     if PpcRegExp(P1).RegExp[i] <> SearchRegExp[i] then
+//     begin
+//       Compare:=ord(PpcRegExp(P1).RegExp[i])-ord(SearchRegExp[i]);
+//       break;
+//     end;
+//   if i > l then Compare:=l1-l2;
+    Compare := stringsx.PasStrCmp(PpcRegExp(P1).RegExp, SearchRegExp, False);
+  end;
+end;
+
+function  TRegExpCollection.Find(ARegExp:shortstring;var P: PpcRegExp):boolean;
+var I : integer;
+begin
+ CompareModeInsert:=false;
+ SearchRegExp:=ARegExp;
+ if Search(nil,I) then
+  begin
+   P:=PpcRegExp(At(I));
+   Find:=true;
+  end
+ else
+  begin
+   P:=nil;
+   Find:=false;
+  end;
+ CompareModeInsert:=true;
+end;
+
+function TRegExpCollection.CheckNew(ARegExp:shortstring):PpcRegExp;
+var
+ P : PpcRegExp;
+begin
+ if not Find(ARegExp,P) then
+  begin
+   if Count = MaxRegExp then
+    AtFree(0);
+   P:=New(ppcRegExp,Init(ARegExp,PCRE_CASELESS,nil));
+   Insert(P);
+  end;
+ CheckNew:=P;
+end;
+
+function pcGrepMatch(WildCard, aStr: string; AOptions:integer; ALocale : Pointer): Boolean;
+var
+ PpcRE:PpcRegExp;
+begin
+ PpcRE:=New(ppcRegExp,Init(WildCard,AOptions,Alocale));
+ pcGrepMatch:=PpcRE^.Search(pchar(AStr),Length(AStr));
+ Dispose(PpcRE,Done);
+end;
+
+function pcGrepSub(WildCard, aStr, aRepl: string; AOptions:integer; ALocale : Pointer): string;
+var
+ PpcRE:PpcRegExp;
+begin
+ PpcRE:=New(ppcRegExp,Init(WildCard,AOptions,Alocale));
+ if PpcRE^.Search(pchar(AStr),Length(AStr)) then
+  pcGrepSub:=PpcRE^.GetReplStr(pchar(AStr),ARepl)
+ else
+  pcGrepSub:='';
+ Dispose(PpcRE,Done);
+end;
+
+function pcFastGrepMatch(WildCard, aStr: string): Boolean;
+var
+ PpcRE:PpcRegExp;
+begin
+ PpcRE:=PRegExpCache^.CheckNew(WildCard);
+ pcFastGrepMatch:=PpcRE^.Search(pchar(AStr),Length(AStr));
+end;
+
+function pcFastGrepSub(WildCard, aStr, aRepl: string): string;
+var
+ PpcRE:PpcRegExp;
+begin
+ PpcRE:=PRegExpCache^.CheckNew(WildCard);
+ if PpcRE^.Search(pchar(AStr),Length(AStr)) then
+  pcFastGrepSub:=PpcRE^.GetReplStr(pchar(AStr),ARepl)
+ else
+  pcFastGrepSub:='';
+end;
+
+{$IFDEF PCRE_5_0}
+function pcGetVersion : pchar; assembler; {$FRAME-}{$USES none}
+asm
+  call pcre_version
+end;
+{$ENDIF PCRE_5_0}
+
+function pcError;
+var P: ppcRegExp absolute pRegExp;
+begin
+  Result := (P = nil) or P^.Error;
+  If Result and (P <> nil) then
+  begin
+{     if P^.ErrorPos = 0 then
+      MessageBox(GetString(erRegExpCompile)+'"'+P^.ErrorStr+'"', nil,mfConfirmation+mfOkButton)
+    else}
+      MessageBox(GetString(erRegExpCompile)+'"'+P^.ErrorStr+'"'+GetString(erRegExpCompPos),
+		 @P^.ErrorPos,mfConfirmation+mfOkButton);
+    Dispose(P, Done);
+    P:=nil;
+  end;
+end;
+
+function pcInit;
+var Options : Integer;
+begin
+  If CaseSens then Options := 0 else Options := PCRE_CASELESS;
+  Result := New( PpcRegExp, Init( Pattern,
+				  {DefaultOptions}
+				  startup.MiscMultiData.cfgRegEx.DefaultOptions or Options,
+				  DefaultLocaleTable) );
+end;
+
+Initialization
+ PRegExpCache:=New(PRegExpCollection,Init(64));
+Finalization
+ Dispose(PRegExpCache,Done);
+End.
diff --git a/dist/pcregrep.c b/dist/pcregrep.c
index 4f7fa38..c49a74f 100644
--- a/dist/pcregrep.c
+++ b/dist/pcregrep.c
@@ -1582,12 +1582,15 @@
   int endlinelength;
   int mrc = 0;
   int startoffset = 0;
+  int prevoffsets[2];
   unsigned int options = 0;
   BOOL match;
   char *matchptr = ptr;
   char *t = ptr;
   size_t length, linelength;
 
+  prevoffsets[0] = prevoffsets[1] = -1;
+
   /* At this point, ptr is at the start of a line. We need to find the length
   of the subject string to pass to pcre_exec(). In multiline mode, it is the
   length remainder of the data in the buffer. Otherwise, it is the length of
@@ -1729,55 +1732,86 @@
       {
       if (!invert)
         {
-        if (printname != NULL) fprintf(stdout, "%s:", printname);
-        if (number) fprintf(stdout, "%d:", linenumber);
+        int oldstartoffset = startoffset;
 
-        /* Handle --line-offsets */
+        /* It is possible, when a lookbehind assertion contains \K, for the
+        same string to be found again. The code below advances startoffset, but
+        until it is past the "bumpalong" offset that gave the match, the same
+        substring will be returned. The PCRE1 library does not return the
+        bumpalong offset, so all we can do is ignore repeated strings. (PCRE2
+        does this better.) */
 
-        if (line_offsets)
-          fprintf(stdout, "%d,%d\n", (int)(matchptr + offsets[0] - ptr),
-            offsets[1] - offsets[0]);
-
-        /* Handle --file-offsets */
-
-        else if (file_offsets)
-          fprintf(stdout, "%d,%d\n",
-            (int)(filepos + matchptr + offsets[0] - ptr),
-            offsets[1] - offsets[0]);
-
-        /* Handle --only-matching, which may occur many times */
-
-        else
+        if (prevoffsets[0] != offsets[0] || prevoffsets[1] != offsets[1])
           {
-          BOOL printed = FALSE;
-          omstr *om;
+          prevoffsets[0] = offsets[0];
+          prevoffsets[1] = offsets[1];
 
-          for (om = only_matching; om != NULL; om = om->next)
+          if (printname != NULL) fprintf(stdout, "%s:", printname);
+          if (number) fprintf(stdout, "%d:", linenumber);
+
+          /* Handle --line-offsets */
+
+          if (line_offsets)
+            fprintf(stdout, "%d,%d\n", (int)(matchptr + offsets[0] - ptr),
+              offsets[1] - offsets[0]);
+
+          /* Handle --file-offsets */
+
+          else if (file_offsets)
+            fprintf(stdout, "%d,%d\n",
+              (int)(filepos + matchptr + offsets[0] - ptr),
+              offsets[1] - offsets[0]);
+
+          /* Handle --only-matching, which may occur many times */
+
+          else
             {
-            int n = om->groupnum;
-            if (n < mrc)
+            BOOL printed = FALSE;
+            omstr *om;
+
+            for (om = only_matching; om != NULL; om = om->next)
               {
-              int plen = offsets[2*n + 1] - offsets[2*n];
-              if (plen > 0)
+              int n = om->groupnum;
+              if (n < mrc)
                 {
-                if (printed) fprintf(stdout, "%s", om_separator);
-                if (do_colour) fprintf(stdout, "%c[%sm", 0x1b, colour_string);
-                FWRITE(matchptr + offsets[n*2], 1, plen, stdout);
-                if (do_colour) fprintf(stdout, "%c[00m", 0x1b);
-                printed = TRUE;
+                int plen = offsets[2*n + 1] - offsets[2*n];
+                if (plen > 0)
+                  {
+                  if (printed) fprintf(stdout, "%s", om_separator);
+                  if (do_colour) fprintf(stdout, "%c[%sm", 0x1b, colour_string);
+                  FWRITE(matchptr + offsets[n*2], 1, plen, stdout);
+                  if (do_colour) fprintf(stdout, "%c[00m", 0x1b);
+                  printed = TRUE;
+                  }
                 }
               }
-            }
 
-          if (printed || printname != NULL || number) fprintf(stdout, "\n");
+            if (printed || printname != NULL || number) fprintf(stdout, "\n");
+            }
           }
 
-        /* Prepare to repeat to find the next match */
+        /* Prepare to repeat to find the next match. If the patterned contained
+        a lookbehind tht included \K, it is possible that the end of the match
+        might be at or before the actual strting offset we have just used. We
+        need to start one character further on. Unfortunately, for unanchored
+        patterns, the actual start offset can be greater that the one that was
+        set as a result of "bumpalong". PCRE1 does not return the actual start
+        offset, so we have to check against the original start offset. This may
+        lead to duplicates - we we need the fudge above to avoid printing them.
+        (PCRE2 does this better.) */
 
         match = FALSE;
         if (line_buffered) fflush(stdout);
         rc = 0;                      /* Had some success */
         startoffset = offsets[1];    /* Restart after the match */
+        if (startoffset <= oldstartoffset)
+          {
+          if ((size_t)startoffset >= length)
+            goto END_ONE_MATCH;              /* We were at the end */
+          startoffset = oldstartoffset + 1;
+          if (utf8)
+            while ((matchptr[startoffset] & 0xc0) == 0x80) startoffset++;
+          }
         goto ONLY_MATCHING_RESTART;
         }
       }
@@ -1974,6 +2008,7 @@
   /* Advance to after the newline and increment the line number. The file
   offset to the current line is maintained in filepos. */
 
+  END_ONE_MATCH:
   ptr += linelength + endlinelength;
   filepos += (int)(linelength + endlinelength);
   linenumber++;
diff --git a/dist/pcretest.c b/dist/pcretest.c
index b8dc3c6..27107ca 100644
--- a/dist/pcretest.c
+++ b/dist/pcretest.c
@@ -2257,16 +2257,19 @@
   fprintf(f, "Callout %d: last capture = %d\n",
     cb->callout_number, cb->capture_last);
 
-  for (i = 0; i < cb->capture_top * 2; i += 2)
+  if (cb->offset_vector != NULL)
     {
-    if (cb->offset_vector[i] < 0)
-      fprintf(f, "%2d: <unset>\n", i/2);
-    else
+    for (i = 0; i < cb->capture_top * 2; i += 2)
       {
-      fprintf(f, "%2d: ", i/2);
-      PCHARSV(cb->subject, cb->offset_vector[i],
-        cb->offset_vector[i+1] - cb->offset_vector[i], f);
-      fprintf(f, "\n");
+      if (cb->offset_vector[i] < 0)
+        fprintf(f, "%2d: <unset>\n", i/2);
+      else
+        {
+        fprintf(f, "%2d: ", i/2);
+        PCHARSV(cb->subject, cb->offset_vector[i],
+          cb->offset_vector[i+1] - cb->offset_vector[i], f);
+        fprintf(f, "\n");
+        }
       }
     }
   }
@@ -2519,7 +2522,7 @@
 re->name_count = swap_uint16(re->name_count);
 re->ref_count = swap_uint16(re->ref_count);
 
-if (extra != NULL)
+if (extra != NULL && (extra->flags & PCRE_EXTRA_STUDY_DATA) != 0)
   {
   pcre_study_data *rsd = (pcre_study_data *)(extra->study_data);
   rsd->size = swap_uint32(rsd->size);
@@ -2700,7 +2703,7 @@
 re->name_count = swap_uint16(re->name_count);
 re->ref_count = swap_uint16(re->ref_count);
 
-if (extra != NULL)
+if (extra != NULL && (extra->flags & PCRE_EXTRA_STUDY_DATA) != 0)
   {
   pcre_study_data *rsd = (pcre_study_data *)(extra->study_data);
   rsd->size = swap_uint32(rsd->size);
@@ -3453,7 +3456,7 @@
   pcre_extra *extra = NULL;
 
 #if !defined NOPOSIX  /* There are still compilers that require no indent */
-  regex_t preg;
+  regex_t preg = { NULL, 0, 0} ;
   int do_posix = 0;
 #endif
 
@@ -5603,6 +5606,12 @@
 
       if (!do_g && !do_G) break;
 
+      if (use_offsets == NULL)
+        {
+        fprintf(outfile, "Cannot do global matching without an ovector\n");
+        break;
+        }
+
       /* If we have matched an empty string, first check to see if we are at
       the end of the subject. If so, the /g loop is over. Otherwise, mimic what
       Perl's /g options does. This turns out to be rather cunning. First we set
@@ -5618,9 +5627,33 @@
         g_notempty = PCRE_NOTEMPTY_ATSTART | PCRE_ANCHORED;
         }
 
-      /* For /g, update the start offset, leaving the rest alone */
+      /* For /g, update the start offset, leaving the rest alone. There is a
+      tricky case when \K is used in a positive lookbehind assertion. This can
+      cause the end of the match to be less than or equal to the start offset.
+      In this case we restart at one past the start offset. This may return the
+      same match if the original start offset was bumped along during the
+      match, but eventually the new start offset will hit the actual start
+      offset. (In PCRE2 the true start offset is available, and this can be
+      done better. It is not worth doing more than making sure we do not loop
+      at this stage in the life of PCRE1.) */
 
-      if (do_g) start_offset = use_offsets[1];
+      if (do_g)
+        {
+        if (g_notempty == 0 && use_offsets[1] <= start_offset)
+          {
+          if (start_offset >= len) break;  /* End of subject */
+          start_offset++;
+          if (use_utf)
+            {
+            while (start_offset < len)
+              {
+              if ((bptr[start_offset] & 0xc0) != 0x80) break;
+              start_offset++;
+              }
+            }
+          }
+        else start_offset = use_offsets[1];
+        }
 
       /* For /G, update the pointer and length */
 
@@ -5637,7 +5670,7 @@
   CONTINUE:
 
 #if !defined NOPOSIX
-  if (posix || do_posix) regfree(&preg);
+  if ((posix || do_posix) && preg.re_pcre != 0) regfree(&preg);
 #endif
 
   if (re != NULL) new_free(re);
diff --git a/dist/sljit/sljitConfig.h b/dist/sljit/sljitConfig.h
index 4d93f4f..10364c3 100644
--- a/dist/sljit/sljitConfig.h
+++ b/dist/sljit/sljitConfig.h
@@ -96,13 +96,19 @@
 #define SLJIT_EXECUTABLE_ALLOCATOR 1
 #endif
 
+/* Return with error when an invalid argument is passed. */
+#ifndef SLJIT_ARGUMENT_CHECKS
+/* Disabled by default */
+#define SLJIT_ARGUMENT_CHECKS 0
+#endif
+
 /* Debug checks (assertions, etc.). */
 #ifndef SLJIT_DEBUG
 /* Enabled by default */
 #define SLJIT_DEBUG 1
 #endif
 
-/* Verbose operations */
+/* Verbose operations. */
 #ifndef SLJIT_VERBOSE
 /* Enabled by default */
 #define SLJIT_VERBOSE 1
diff --git a/dist/sljit/sljitConfigInternal.h b/dist/sljit/sljitConfigInternal.h
index 6351e5b..3284012 100644
--- a/dist/sljit/sljitConfigInternal.h
+++ b/dist/sljit/sljitConfigInternal.h
@@ -60,6 +60,7 @@
                           a double precision floating point array by index
      SLJIT_SINGLE_SHIFT : the shift required to apply when accessing
                           a single precision floating point array by index
+     SLJIT_LOCALS_OFFSET : local space starting offset (SLJIT_SP + SLJIT_LOCALS_OFFSET)
      SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address
 
    Other macros:
@@ -67,6 +68,10 @@
      SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper)
 */
 
+/*****************/
+/* Sanity check. */
+/*****************/
+
 #if !((defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
 	|| (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
 	|| (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
@@ -84,7 +89,6 @@
 #error "An architecture must be selected"
 #endif
 
-/* Sanity check. */
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
 	+ (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
 	+ (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
@@ -102,7 +106,10 @@
 #error "Multiple architectures are selected"
 #endif
 
-/* Auto select option (requires compiler support) */
+/********************************************************/
+/* Automatic CPU detection (requires compiler support). */
+/********************************************************/
+
 #if (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO)
 
 #ifndef _WIN32
@@ -155,6 +162,10 @@
 #undef SLJIT_EXECUTABLE_ALLOCATOR
 #endif
 
+/******************************/
+/* CPU family type detection. */
+/******************************/
+
 #if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
 	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
 #define SLJIT_CONFIG_ARM_32 1
@@ -172,52 +183,9 @@
 #define SLJIT_CONFIG_SPARC 1
 #endif
 
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-#define SLJIT_NUMBER_OF_REGISTERS 10
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 7
-#elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
-#ifndef _WIN64
-#define SLJIT_NUMBER_OF_REGISTERS 12
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 6
-#else
-#define SLJIT_NUMBER_OF_REGISTERS 12
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
-#endif /* _WIN64 */
-#elif (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7)
-#define SLJIT_NUMBER_OF_REGISTERS 11
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
-#elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
-#define SLJIT_NUMBER_OF_REGISTERS 11
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 7
-#elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
-#define SLJIT_NUMBER_OF_REGISTERS 23
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 10
-#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC)
-#define SLJIT_NUMBER_OF_REGISTERS 22
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 17
-#elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS)
-#define SLJIT_NUMBER_OF_REGISTERS 17
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
-#elif (defined SLJIT_CONFIG_SPARC && SLJIT_CONFIG_SPARC)
-#define SLJIT_NUMBER_OF_REGISTERS 18
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 14
-#elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
-#define SLJIT_NUMBER_OF_REGISTERS 0
-#define SLJIT_NUMBER_OF_SAVED_REGISTERS 0
-#endif
-
-#define SLJIT_NUMBER_OF_SCRATCH_REGISTERS \
-	(SLJIT_NUMBER_OF_REGISTERS - SLJIT_NUMBER_OF_SAVED_REGISTERS)
-
-#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 6
-#if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && (defined _WIN64)
-#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 1
-#else
-#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0
-#endif
-
-#define SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS \
-	(SLJIT_NUMBER_OF_FLOAT_REGISTERS - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS)
+/**********************************/
+/* External function definitions. */
+/**********************************/
 
 #if !(defined SLJIT_STD_MACROS_DEFINED && SLJIT_STD_MACROS_DEFINED)
 
@@ -225,20 +193,21 @@
 #include <stdlib.h>
 #include <string.h>
 
-#endif /* STD_MACROS_DEFINED */
+#endif /* SLJIT_STD_MACROS_DEFINED */
 
 /* General macros:
    Note: SLJIT is designed to be independent from them as possible.
 
-   In release mode (SLJIT_DEBUG is not defined) only the following macros are needed:
+   In release mode (SLJIT_DEBUG is not defined) only the following
+   external functions are needed:
 */
 
 #ifndef SLJIT_MALLOC
-#define SLJIT_MALLOC(size) malloc(size)
+#define SLJIT_MALLOC(size, allocator_data) malloc(size)
 #endif
 
 #ifndef SLJIT_FREE
-#define SLJIT_FREE(ptr) free(ptr)
+#define SLJIT_FREE(ptr, allocator_data) free(ptr)
 #endif
 
 #ifndef SLJIT_MEMMOVE
@@ -249,6 +218,10 @@
 #define SLJIT_ZEROMEM(dest, len) memset(dest, 0, len)
 #endif
 
+/***************************/
+/* Compiler helper macros. */
+/***************************/
+
 #if !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY)
 
 #if defined(__GNUC__) && (__GNUC__ >= 3)
@@ -270,6 +243,15 @@
 #endif
 #endif /* !SLJIT_INLINE */
 
+#ifndef SLJIT_NOINLINE
+/* Not inline functions. */
+#if defined(__GNUC__)
+#define SLJIT_NOINLINE __attribute__ ((noinline))
+#else
+#define SLJIT_NOINLINE
+#endif
+#endif /* !SLJIT_INLINE */
+
 #ifndef SLJIT_CONST
 /* Const variables. */
 #define SLJIT_CONST const
@@ -280,6 +262,10 @@
 #define SLJIT_UNUSED_ARG(arg) (void)arg
 #endif
 
+/*********************************/
+/* Type of public API functions. */
+/*********************************/
+
 #if (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC)
 /* Static ABI functions. For all-in-one programs. */
 
@@ -294,6 +280,10 @@
 #define SLJIT_API_FUNC_ATTRIBUTE
 #endif /* (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) */
 
+/****************************/
+/* Instruction cache flush. */
+/****************************/
+
 #ifndef SLJIT_CACHE_FLUSH
 
 #if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86)
@@ -339,6 +329,10 @@
 
 #endif /* !SLJIT_CACHE_FLUSH */
 
+/******************************************************/
+/* Byte/half/int/word/single/double type definitions. */
+/******************************************************/
+
 /* 8 bit byte type. */
 typedef unsigned char sljit_ub;
 typedef signed char sljit_sb;
@@ -351,7 +345,7 @@
 typedef unsigned int sljit_ui;
 typedef signed int sljit_si;
 
-/* Machine word type. Can encapsulate a pointer.
+/* Machine word type. Enough for storing a pointer.
      32 bit for 32 bit machines.
      64 bit for 64 bit machines. */
 #if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
@@ -404,44 +398,13 @@
 
 #endif /* !SLJIT_W */
 
-#ifndef SLJIT_CALL
-
-/* ABI (Application Binary Interface) types. */
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-
-#if defined(__GNUC__) && !defined(__APPLE__)
-
-#define SLJIT_CALL __attribute__ ((fastcall))
-#define SLJIT_X86_32_FASTCALL 1
-
-#elif defined(_MSC_VER)
-
-#define SLJIT_CALL __fastcall
-#define SLJIT_X86_32_FASTCALL 1
-
-#elif defined(__BORLANDC__)
-
-#define SLJIT_CALL __msfastcall
-#define SLJIT_X86_32_FASTCALL 1
-
-#else /* Unknown compiler. */
-
-/* The cdecl attribute is the default. */
-#define SLJIT_CALL
-
-#endif
-
-#else /* Non x86-32 architectures. */
-
-#define SLJIT_CALL
-
-#endif /* SLJIT_CONFIG_X86_32 */
-
-#endif /* !SLJIT_CALL */
+/*************************/
+/* Endianness detection. */
+/*************************/
 
 #if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN)
 
-/* These macros are useful for the applications. */
+/* These macros are mostly useful for the applications. */
 #if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
 	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
 
@@ -479,29 +442,6 @@
 #error "Exactly one endianness must be selected"
 #endif
 
-#ifndef SLJIT_INDIRECT_CALL
-#if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN)) \
-	|| ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX)
-/* It seems certain ppc compilers use an indirect addressing for functions
-   which makes things complicated. */
-#define SLJIT_INDIRECT_CALL 1
-#endif
-#endif /* SLJIT_INDIRECT_CALL */
-
-#ifndef SLJIT_RETURN_ADDRESS_OFFSET
-#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-#define SLJIT_RETURN_ADDRESS_OFFSET 8
-#else
-#define SLJIT_RETURN_ADDRESS_OFFSET 0
-#endif
-#endif /* SLJIT_RETURN_ADDRESS_OFFSET */
-
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-/* Auto detect SSE2 support using CPUID.
-   On 64 bit x86 cpus, sse2 must be present. */
-#define SLJIT_DETECT_SSE2 1
-#endif
-
 #ifndef SLJIT_UNALIGNED
 
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
@@ -516,6 +456,73 @@
 
 #endif /* !SLJIT_UNALIGNED */
 
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+/* Auto detect SSE2 support using CPUID.
+   On 64 bit x86 cpus, sse2 must be present. */
+#define SLJIT_DETECT_SSE2 1
+#endif
+
+/*****************************************************************************************/
+/* Calling convention of functions generated by SLJIT or called from the generated code. */
+/*****************************************************************************************/
+
+#ifndef SLJIT_CALL
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+
+#if defined(__GNUC__) && !defined(__APPLE__)
+
+#define SLJIT_CALL __attribute__ ((fastcall))
+#define SLJIT_X86_32_FASTCALL 1
+
+#elif defined(_MSC_VER)
+
+#define SLJIT_CALL __fastcall
+#define SLJIT_X86_32_FASTCALL 1
+
+#elif defined(__BORLANDC__)
+
+#define SLJIT_CALL __msfastcall
+#define SLJIT_X86_32_FASTCALL 1
+
+#else /* Unknown compiler. */
+
+/* The cdecl attribute is the default. */
+#define SLJIT_CALL
+
+#endif
+
+#else /* Non x86-32 architectures. */
+
+#define SLJIT_CALL
+
+#endif /* SLJIT_CONFIG_X86_32 */
+
+#endif /* !SLJIT_CALL */
+
+#ifndef SLJIT_INDIRECT_CALL
+#if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN)) \
+	|| ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX)
+/* It seems certain ppc compilers use an indirect addressing for functions
+   which makes things complicated. */
+#define SLJIT_INDIRECT_CALL 1
+#endif
+#endif /* SLJIT_INDIRECT_CALL */
+
+/* The offset which needs to be substracted from the return address to
+determine the next executed instruction after return. */
+#ifndef SLJIT_RETURN_ADDRESS_OFFSET
+#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
+#define SLJIT_RETURN_ADDRESS_OFFSET 8
+#else
+#define SLJIT_RETURN_ADDRESS_OFFSET 0
+#endif
+#endif /* SLJIT_RETURN_ADDRESS_OFFSET */
+
+/***************************************************/
+/* Functions of the built-in executable allocator. */
+/***************************************************/
+
 #if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR)
 SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size);
 SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr);
@@ -524,6 +531,110 @@
 #define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr)
 #endif
 
+/**********************************************/
+/* Registers and locals offset determination. */
+/**********************************************/
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+
+#define SLJIT_NUMBER_OF_REGISTERS 10
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 7
+#if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL)
+#define SLJIT_LOCALS_OFFSET_BASE ((2 + 4) * sizeof(sljit_sw))
+#else
+/* Maximum 3 arguments are passed on the stack, +1 for double alignment. */
+#define SLJIT_LOCALS_OFFSET_BASE ((3 + 1 + 4) * sizeof(sljit_sw))
+#endif /* SLJIT_X86_32_FASTCALL */
+
+#elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
+
+#ifndef _WIN64
+#define SLJIT_NUMBER_OF_REGISTERS 12
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 6
+#define SLJIT_LOCALS_OFFSET_BASE (sizeof(sljit_sw))
+#else
+#define SLJIT_NUMBER_OF_REGISTERS 12
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
+#define SLJIT_LOCALS_OFFSET_BASE ((4 + 2) * sizeof(sljit_sw))
+#endif /* _WIN64 */
+
+#elif (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7)
+
+#define SLJIT_NUMBER_OF_REGISTERS 11
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
+#define SLJIT_LOCALS_OFFSET_BASE 0
+
+#elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
+
+#define SLJIT_NUMBER_OF_REGISTERS 11
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 7
+#define SLJIT_LOCALS_OFFSET_BASE 0
+
+#elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
+
+#define SLJIT_NUMBER_OF_REGISTERS 25
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 10
+#define SLJIT_LOCALS_OFFSET_BASE (2 * sizeof(sljit_sw))
+
+#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC)
+
+#define SLJIT_NUMBER_OF_REGISTERS 22
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 17
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) || (defined _AIX)
+#define SLJIT_LOCALS_OFFSET_BASE ((6 + 8) * sizeof(sljit_sw))
+#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
+/* Add +1 for double alignment. */
+#define SLJIT_LOCALS_OFFSET_BASE ((3 + 1) * sizeof(sljit_sw))
+#else
+#define SLJIT_LOCALS_OFFSET_BASE (3 * sizeof(sljit_sw))
+#endif /* SLJIT_CONFIG_PPC_64 || _AIX */
+
+#elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS)
+
+#define SLJIT_NUMBER_OF_REGISTERS 17
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+#define SLJIT_LOCALS_OFFSET_BASE (4 * sizeof(sljit_sw))
+#else
+#define SLJIT_LOCALS_OFFSET_BASE 0
+#endif
+
+#elif (defined SLJIT_CONFIG_SPARC && SLJIT_CONFIG_SPARC)
+
+#define SLJIT_NUMBER_OF_REGISTERS 18
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 14
+#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
+/* Add +1 for double alignment. */
+#define SLJIT_LOCALS_OFFSET_BASE ((23 + 1) * sizeof(sljit_sw))
+#endif
+
+#elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
+
+#define SLJIT_NUMBER_OF_REGISTERS 0
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 0
+#define SLJIT_LOCALS_OFFSET_BASE 0
+
+#endif
+
+#define SLJIT_LOCALS_OFFSET (SLJIT_LOCALS_OFFSET_BASE)
+
+#define SLJIT_NUMBER_OF_SCRATCH_REGISTERS \
+	(SLJIT_NUMBER_OF_REGISTERS - SLJIT_NUMBER_OF_SAVED_REGISTERS)
+
+#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 6
+#if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && (defined _WIN64)
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 1
+#else
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0
+#endif
+
+#define SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS \
+	(SLJIT_NUMBER_OF_FLOAT_REGISTERS - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS)
+
+/*************************************/
+/* Debug and verbose related macros. */
+/*************************************/
+
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 #include <stdio.h>
 #endif
diff --git a/dist/sljit/sljitLir.c b/dist/sljit/sljitLir.c
index 69c4b10..5039a7e 100644
--- a/dist/sljit/sljitLir.c
+++ b/dist/sljit/sljitLir.c
@@ -38,12 +38,6 @@
 			return NULL; \
 	} while (0)
 
-#define CHECK_ERROR_VOID() \
-	do { \
-		if (SLJIT_UNLIKELY(compiler->error)) \
-			return; \
-	} while (0)
-
 #define FAIL_IF(expr) \
 	do { \
 		if (SLJIT_UNLIKELY(expr)) \
@@ -236,77 +230,9 @@
 		(saveds < SLJIT_NUMBER_OF_SAVED_REGISTERS ? saveds : SLJIT_NUMBER_OF_SAVED_REGISTERS) + \
 		extra) * sizeof(sljit_sw))
 
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-#define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
-
-#if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL)
-#define FIXED_LOCALS_OFFSET ((2 + 4) * sizeof(sljit_sw))
-#else
-/* Maximum 3 arguments are passed on the stack. */
-#define FIXED_LOCALS_OFFSET ((3 + 4) * sizeof(sljit_sw))
-#endif
-
-#endif /* SLJIT_CONFIG_X86_32 */
-
-#if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
-#define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
-#ifdef _WIN64
-#define FIXED_LOCALS_OFFSET ((4 + 2) * sizeof(sljit_sw))
-#else
-#define FIXED_LOCALS_OFFSET (sizeof(sljit_sw))
-#endif
-#endif
-
-#if (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
-#define SLJIT_HAS_VARIABLE_LOCALS_OFFSET 1
-#endif
-
-#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
-#define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
-#ifdef _AIX
-#define FIXED_LOCALS_OFFSET ((6 + 8) * sizeof(sljit_sw))
-#else
-#define FIXED_LOCALS_OFFSET (3 * sizeof(sljit_sw))
-#endif
-#endif
-
-#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-#define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
-#define FIXED_LOCALS_OFFSET ((6 + 8) * sizeof(sljit_sw))
-#endif
-
-#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
-#define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
-#define FIXED_LOCALS_OFFSET (4 * sizeof(sljit_sw))
-#endif
-
-#if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
-#define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
-#define FIXED_LOCALS_OFFSET 0
-#endif
-
-#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-#define SLJIT_HAS_FIXED_LOCALS_OFFSET 1
-#define FIXED_LOCALS_OFFSET (23 * sizeof(sljit_sw))
-#endif
-
-#if (defined SLJIT_HAS_VARIABLE_LOCALS_OFFSET && SLJIT_HAS_VARIABLE_LOCALS_OFFSET)
-
 #define ADJUST_LOCAL_OFFSET(p, i) \
 	if ((p) == (SLJIT_MEM1(SLJIT_SP))) \
-		(i) += compiler->locals_offset;
-
-#elif (defined SLJIT_HAS_FIXED_LOCALS_OFFSET && SLJIT_HAS_FIXED_LOCALS_OFFSET)
-
-#define ADJUST_LOCAL_OFFSET(p, i) \
-	if ((p) == (SLJIT_MEM1(SLJIT_SP))) \
-		(i) += FIXED_LOCALS_OFFSET;
-
-#else
-
-#define ADJUST_LOCAL_OFFSET(p, i)
-
-#endif
+		(i) += SLJIT_LOCALS_OFFSET;
 
 #endif /* !(defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) */
 
@@ -319,6 +245,75 @@
 #include "sljitExecAllocator.c"
 #endif
 
+/* Argument checking features. */
+
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+
+/* Returns with error when an invalid argument is passed. */
+
+#define CHECK_ARGUMENT(x) \
+	do { \
+		if (SLJIT_UNLIKELY(!(x))) \
+			return 1; \
+	} while (0)
+
+#define CHECK_RETURN_TYPE sljit_si
+#define CHECK_RETURN_OK return 0
+
+#define CHECK(x) \
+	do { \
+		if (SLJIT_UNLIKELY(x)) { \
+			compiler->error = SLJIT_ERR_BAD_ARGUMENT; \
+			return SLJIT_ERR_BAD_ARGUMENT; \
+		} \
+	} while (0)
+
+#define CHECK_PTR(x) \
+	do { \
+		if (SLJIT_UNLIKELY(x)) { \
+			compiler->error = SLJIT_ERR_BAD_ARGUMENT; \
+			return NULL; \
+		} \
+	} while (0)
+
+#define CHECK_REG_INDEX(x) \
+	do { \
+		if (SLJIT_UNLIKELY(x)) { \
+			return -2; \
+		} \
+	} while (0)
+
+#elif (defined SLJIT_DEBUG && SLJIT_DEBUG)
+
+/* Assertion failure occures if an invalid argument is passed. */
+#undef SLJIT_ARGUMENT_CHECKS
+#define SLJIT_ARGUMENT_CHECKS 1
+
+#define CHECK_ARGUMENT(x) SLJIT_ASSERT(x)
+#define CHECK_RETURN_TYPE void
+#define CHECK_RETURN_OK return
+#define CHECK(x) x
+#define CHECK_PTR(x) x
+#define CHECK_REG_INDEX(x) x
+
+#elif (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
+
+/* Arguments are not checked. */
+#define CHECK_RETURN_TYPE void
+#define CHECK_RETURN_OK return
+#define CHECK(x) x
+#define CHECK_PTR(x) x
+#define CHECK_REG_INDEX(x) x
+
+#else
+
+/* Arguments are not checked. */
+#define CHECK(x)
+#define CHECK_PTR(x)
+#define CHECK_REG_INDEX(x)
+
+#endif /* SLJIT_ARGUMENT_CHECKS */
+
 /* --------------------------------------------------------------------- */
 /*  Public functions                                                     */
 /* --------------------------------------------------------------------- */
@@ -330,9 +325,9 @@
 static void init_compiler(void);
 #endif
 
-SLJIT_API_FUNC_ATTRIBUTE struct sljit_compiler* sljit_create_compiler(void)
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_compiler* sljit_create_compiler(void *allocator_data)
 {
-	struct sljit_compiler *compiler = (struct sljit_compiler*)SLJIT_MALLOC(sizeof(struct sljit_compiler));
+	struct sljit_compiler *compiler = (struct sljit_compiler*)SLJIT_MALLOC(sizeof(struct sljit_compiler), allocator_data);
 	if (!compiler)
 		return NULL;
 	SLJIT_ZEROMEM(compiler, sizeof(struct sljit_compiler));
@@ -354,15 +349,16 @@
 	/* Only the non-zero members must be set. */
 	compiler->error = SLJIT_SUCCESS;
 
-	compiler->buf = (struct sljit_memory_fragment*)SLJIT_MALLOC(BUF_SIZE);
-	compiler->abuf = (struct sljit_memory_fragment*)SLJIT_MALLOC(ABUF_SIZE);
+	compiler->allocator_data = allocator_data;
+	compiler->buf = (struct sljit_memory_fragment*)SLJIT_MALLOC(BUF_SIZE, allocator_data);
+	compiler->abuf = (struct sljit_memory_fragment*)SLJIT_MALLOC(ABUF_SIZE, allocator_data);
 
 	if (!compiler->buf || !compiler->abuf) {
 		if (compiler->buf)
-			SLJIT_FREE(compiler->buf);
+			SLJIT_FREE(compiler->buf, allocator_data);
 		if (compiler->abuf)
-			SLJIT_FREE(compiler->abuf);
-		SLJIT_FREE(compiler);
+			SLJIT_FREE(compiler->abuf, allocator_data);
+		SLJIT_FREE(compiler, allocator_data);
 		return NULL;
 	}
 
@@ -375,17 +371,19 @@
 	compiler->saveds = -1;
 	compiler->fscratches = -1;
 	compiler->fsaveds = -1;
+	compiler->local_size = -1;
 
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
 	compiler->args = -1;
 #endif
 
 #if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5)
-	compiler->cpool = (sljit_uw*)SLJIT_MALLOC(CPOOL_SIZE * sizeof(sljit_uw) + CPOOL_SIZE * sizeof(sljit_ub));
+	compiler->cpool = (sljit_uw*)SLJIT_MALLOC(CPOOL_SIZE * sizeof(sljit_uw)
+		+ CPOOL_SIZE * sizeof(sljit_ub), allocator_data);
 	if (!compiler->cpool) {
-		SLJIT_FREE(compiler->buf);
-		SLJIT_FREE(compiler->abuf);
-		SLJIT_FREE(compiler);
+		SLJIT_FREE(compiler->buf, allocator_data);
+		SLJIT_FREE(compiler->abuf, allocator_data);
+		SLJIT_FREE(compiler, allocator_data);
 		return NULL;
 	}
 	compiler->cpool_unique = (sljit_ub*)(compiler->cpool + CPOOL_SIZE);
@@ -414,25 +412,33 @@
 {
 	struct sljit_memory_fragment *buf;
 	struct sljit_memory_fragment *curr;
+	void *allocator_data = compiler->allocator_data;
+	SLJIT_UNUSED_ARG(allocator_data);
 
 	buf = compiler->buf;
 	while (buf) {
 		curr = buf;
 		buf = buf->next;
-		SLJIT_FREE(curr);
+		SLJIT_FREE(curr, allocator_data);
 	}
 
 	buf = compiler->abuf;
 	while (buf) {
 		curr = buf;
 		buf = buf->next;
-		SLJIT_FREE(curr);
+		SLJIT_FREE(curr, allocator_data);
 	}
 
 #if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5)
-	SLJIT_FREE(compiler->cpool);
+	SLJIT_FREE(compiler->cpool, allocator_data);
 #endif
-	SLJIT_FREE(compiler);
+	SLJIT_FREE(compiler, allocator_data);
+}
+
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_compiler_memory_error(struct sljit_compiler *compiler)
+{
+	if (compiler->error == SLJIT_SUCCESS)
+		compiler->error = SLJIT_ERR_ALLOC_FAILED;
 }
 
 #if (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
@@ -488,7 +494,7 @@
 		compiler->buf->used_size += size;
 		return ret;
 	}
-	new_frag = (struct sljit_memory_fragment*)SLJIT_MALLOC(BUF_SIZE);
+	new_frag = (struct sljit_memory_fragment*)SLJIT_MALLOC(BUF_SIZE, compiler->allocator_data);
 	PTR_FAIL_IF_NULL(new_frag);
 	new_frag->next = compiler->buf;
 	compiler->buf = new_frag;
@@ -507,7 +513,7 @@
 		compiler->abuf->used_size += size;
 		return ret;
 	}
-	new_frag = (struct sljit_memory_fragment*)SLJIT_MALLOC(ABUF_SIZE);
+	new_frag = (struct sljit_memory_fragment*)SLJIT_MALLOC(ABUF_SIZE, compiler->allocator_data);
 	PTR_FAIL_IF_NULL(new_frag);
 	new_frag->next = compiler->abuf;
 	compiler->abuf = new_frag;
@@ -547,6 +553,40 @@
 	compiler->buf = prev;
 }
 
+static SLJIT_INLINE void set_emit_enter(struct sljit_compiler *compiler,
+	sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
+	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
+{
+	SLJIT_UNUSED_ARG(args);
+	SLJIT_UNUSED_ARG(local_size);
+
+	compiler->options = options;
+	compiler->scratches = scratches;
+	compiler->saveds = saveds;
+	compiler->fscratches = fscratches;
+	compiler->fsaveds = fsaveds;
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	compiler->logical_local_size = local_size;
+#endif
+}
+
+static SLJIT_INLINE void set_set_context(struct sljit_compiler *compiler,
+	sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
+	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
+{
+	SLJIT_UNUSED_ARG(args);
+	SLJIT_UNUSED_ARG(local_size);
+
+	compiler->options = options;
+	compiler->scratches = scratches;
+	compiler->saveds = saveds;
+	compiler->fscratches = fscratches;
+	compiler->fsaveds = fsaveds;
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	compiler->logical_local_size = local_size;
+#endif
+}
+
 static SLJIT_INLINE void set_label(struct sljit_label *label, struct sljit_compiler *compiler)
 {
 	label->next = NULL;
@@ -583,9 +623,9 @@
 #define ADDRESSING_DEPENDS_ON(exp, reg) \
 	(((exp) & SLJIT_MEM) && (((exp) & REG_MASK) == reg || OFFS_REG(exp) == reg))
 
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 #define FUNCTION_CHECK_OP() \
-	SLJIT_ASSERT(!GET_FLAGS(op) || !(op & SLJIT_KEEP_FLAGS)); \
+	CHECK_ARGUMENT(!GET_FLAGS(op) || !(op & SLJIT_KEEP_FLAGS)); \
 	switch (GET_OPCODE(op)) { \
 	case SLJIT_NOT: \
 	case SLJIT_CLZ: \
@@ -595,27 +635,27 @@
 	case SLJIT_SHL: \
 	case SLJIT_LSHR: \
 	case SLJIT_ASHR: \
-		SLJIT_ASSERT(!(op & (SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C))); \
+		CHECK_ARGUMENT(!(op & (SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C))); \
 		break; \
 	case SLJIT_NEG: \
-		SLJIT_ASSERT(!(op & (SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_C))); \
+		CHECK_ARGUMENT(!(op & (SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_C))); \
 		break; \
 	case SLJIT_MUL: \
-		SLJIT_ASSERT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_C))); \
+		CHECK_ARGUMENT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_C))); \
 		break; \
 	case SLJIT_ADD: \
-		SLJIT_ASSERT(!(op & (SLJIT_SET_U | SLJIT_SET_S))); \
+		CHECK_ARGUMENT(!(op & (SLJIT_SET_U | SLJIT_SET_S))); \
 		break; \
 	case SLJIT_SUB: \
 		break; \
 	case SLJIT_ADDC: \
 	case SLJIT_SUBC: \
-		SLJIT_ASSERT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O))); \
+		CHECK_ARGUMENT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O))); \
 		break; \
 	case SLJIT_BREAKPOINT: \
 	case SLJIT_NOP: \
-	case SLJIT_UMUL: \
-	case SLJIT_SMUL: \
+	case SLJIT_LUMUL: \
+	case SLJIT_LSMUL: \
 	case SLJIT_MOV: \
 	case SLJIT_MOV_UI: \
 	case SLJIT_MOV_P: \
@@ -623,109 +663,112 @@
 	case SLJIT_MOVU_UI: \
 	case SLJIT_MOVU_P: \
 		/* Nothing allowed */ \
-		SLJIT_ASSERT(!(op & (SLJIT_INT_OP | SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
+		CHECK_ARGUMENT(!(op & (SLJIT_INT_OP | SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
 		break; \
 	default: \
 		/* Only SLJIT_INT_OP or SLJIT_SINGLE_OP is allowed. */ \
-		SLJIT_ASSERT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
+		CHECK_ARGUMENT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
 		break; \
 	}
 
 #define FUNCTION_CHECK_FOP() \
-	SLJIT_ASSERT(!GET_FLAGS(op) || !(op & SLJIT_KEEP_FLAGS)); \
+	CHECK_ARGUMENT(!GET_FLAGS(op) || !(op & SLJIT_KEEP_FLAGS)); \
 	switch (GET_OPCODE(op)) { \
-	case SLJIT_CMPD: \
-		SLJIT_ASSERT(!(op & (SLJIT_SET_U | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
-		SLJIT_ASSERT((op & (SLJIT_SET_E | SLJIT_SET_S))); \
+	case SLJIT_DCMP: \
+		CHECK_ARGUMENT(!(op & (SLJIT_SET_U | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
+		CHECK_ARGUMENT((op & (SLJIT_SET_E | SLJIT_SET_S))); \
 		break; \
 	default: \
 		/* Only SLJIT_INT_OP or SLJIT_SINGLE_OP is allowed. */ \
-		SLJIT_ASSERT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
+		CHECK_ARGUMENT(!(op & (SLJIT_SET_E | SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C | SLJIT_KEEP_FLAGS))); \
 		break; \
 	}
 
 #define FUNCTION_CHECK_IS_REG(r) \
+	(((r) >= SLJIT_R0 && (r) < (SLJIT_R0 + compiler->scratches)) || \
+	((r) > (SLJIT_S0 - compiler->saveds) && (r) <= SLJIT_S0))
+
+#define FUNCTION_CHECK_IS_REG_OR_UNUSED(r) \
 	((r) == SLJIT_UNUSED || \
 	((r) >= SLJIT_R0 && (r) < (SLJIT_R0 + compiler->scratches)) || \
 	((r) > (SLJIT_S0 - compiler->saveds) && (r) <= SLJIT_S0))
 
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-#define FUNCTION_ASSERT_IF_VIRTUAL(p) \
-	SLJIT_ASSERT((p) < SLJIT_R3 || (p) > SLJIT_R6);
+#define CHECK_NOT_VIRTUAL_REGISTER(p) \
+	CHECK_ARGUMENT((p) < SLJIT_R3 || (p) > SLJIT_R6);
 #else
-#define FUNCTION_ASSERT_IF_VIRTUAL(p)
+#define CHECK_NOT_VIRTUAL_REGISTER(p)
 #endif
 
 #define FUNCTION_CHECK_SRC(p, i) \
-	SLJIT_ASSERT(compiler->scratches != -1 && compiler->saveds != -1); \
+	CHECK_ARGUMENT(compiler->scratches != -1 && compiler->saveds != -1); \
 	if (FUNCTION_CHECK_IS_REG(p)) \
-		SLJIT_ASSERT((i) == 0 && (p) != SLJIT_UNUSED); \
+		CHECK_ARGUMENT((i) == 0); \
 	else if ((p) == SLJIT_IMM) \
 		; \
 	else if ((p) == (SLJIT_MEM1(SLJIT_SP))) \
-		SLJIT_ASSERT((i) >= 0 && (i) < compiler->logical_local_size); \
-	else if ((p) & SLJIT_MEM) { \
-		SLJIT_ASSERT(FUNCTION_CHECK_IS_REG((p) & REG_MASK)); \
-		FUNCTION_ASSERT_IF_VIRTUAL((p) & REG_MASK); \
+		CHECK_ARGUMENT((i) >= 0 && (i) < compiler->logical_local_size); \
+	else { \
+		CHECK_ARGUMENT((p) & SLJIT_MEM); \
+		CHECK_ARGUMENT(FUNCTION_CHECK_IS_REG_OR_UNUSED((p) & REG_MASK)); \
+		CHECK_NOT_VIRTUAL_REGISTER((p) & REG_MASK); \
 		if ((p) & OFFS_REG_MASK) { \
-			SLJIT_ASSERT(FUNCTION_CHECK_IS_REG(OFFS_REG(p))); \
-			FUNCTION_ASSERT_IF_VIRTUAL(OFFS_REG(p)); \
-			SLJIT_ASSERT(!((i) & ~0x3)); \
+			CHECK_ARGUMENT(((p) & REG_MASK) != SLJIT_UNUSED); \
+			CHECK_ARGUMENT(FUNCTION_CHECK_IS_REG(OFFS_REG(p))); \
+			CHECK_NOT_VIRTUAL_REGISTER(OFFS_REG(p)); \
+			CHECK_ARGUMENT(!((i) & ~0x3)); \
 		} \
-		SLJIT_ASSERT(!((p) & ~(SLJIT_MEM | SLJIT_IMM | REG_MASK | OFFS_REG_MASK))); \
-	} \
-	else \
-		SLJIT_ASSERT_STOP();
+		CHECK_ARGUMENT(!((p) & ~(SLJIT_MEM | SLJIT_IMM | REG_MASK | OFFS_REG_MASK))); \
+	}
 
 #define FUNCTION_CHECK_DST(p, i) \
-	SLJIT_ASSERT(compiler->scratches != -1 && compiler->saveds != -1); \
-	if (FUNCTION_CHECK_IS_REG(p)) \
-		SLJIT_ASSERT((i) == 0); \
+	CHECK_ARGUMENT(compiler->scratches != -1 && compiler->saveds != -1); \
+	if (FUNCTION_CHECK_IS_REG_OR_UNUSED(p)) \
+		CHECK_ARGUMENT((i) == 0); \
 	else if ((p) == (SLJIT_MEM1(SLJIT_SP))) \
-		SLJIT_ASSERT((i) >= 0 && (i) < compiler->logical_local_size); \
-	else if ((p) & SLJIT_MEM) { \
-		SLJIT_ASSERT(FUNCTION_CHECK_IS_REG((p) & REG_MASK)); \
-		FUNCTION_ASSERT_IF_VIRTUAL((p) & REG_MASK); \
+		CHECK_ARGUMENT((i) >= 0 && (i) < compiler->logical_local_size); \
+	else { \
+		CHECK_ARGUMENT((p) & SLJIT_MEM); \
+		CHECK_ARGUMENT(FUNCTION_CHECK_IS_REG_OR_UNUSED((p) & REG_MASK)); \
+		CHECK_NOT_VIRTUAL_REGISTER((p) & REG_MASK); \
 		if ((p) & OFFS_REG_MASK) { \
-			SLJIT_ASSERT(FUNCTION_CHECK_IS_REG(OFFS_REG(p))); \
-			FUNCTION_ASSERT_IF_VIRTUAL(OFFS_REG(p)); \
-			SLJIT_ASSERT(!((i) & ~0x3)); \
+			CHECK_ARGUMENT(((p) & REG_MASK) != SLJIT_UNUSED); \
+			CHECK_ARGUMENT(FUNCTION_CHECK_IS_REG(OFFS_REG(p))); \
+			CHECK_NOT_VIRTUAL_REGISTER(OFFS_REG(p)); \
+			CHECK_ARGUMENT(!((i) & ~0x3)); \
 		} \
-		SLJIT_ASSERT(!((p) & ~(SLJIT_MEM | SLJIT_IMM | REG_MASK | OFFS_REG_MASK))); \
-	} \
-	else \
-		SLJIT_ASSERT_STOP();
+		CHECK_ARGUMENT(!((p) & ~(SLJIT_MEM | SLJIT_IMM | REG_MASK | OFFS_REG_MASK))); \
+	}
 
 #define FUNCTION_FCHECK(p, i) \
-	SLJIT_ASSERT(compiler->fscratches != -1 && compiler->fsaveds != -1); \
+	CHECK_ARGUMENT(compiler->fscratches != -1 && compiler->fsaveds != -1); \
 	if (((p) >= SLJIT_FR0 && (p) < (SLJIT_FR0 + compiler->fscratches)) || \
 			((p) > (SLJIT_FS0 - compiler->fsaveds) && (p) <= SLJIT_FS0)) \
-		SLJIT_ASSERT(i == 0); \
+		CHECK_ARGUMENT(i == 0); \
 	else if ((p) == (SLJIT_MEM1(SLJIT_SP))) \
-		SLJIT_ASSERT((i) >= 0 && (i) < compiler->logical_local_size); \
-	else if ((p) & SLJIT_MEM) { \
-		SLJIT_ASSERT(FUNCTION_CHECK_IS_REG((p) & REG_MASK)); \
-		FUNCTION_ASSERT_IF_VIRTUAL((p) & REG_MASK); \
+		CHECK_ARGUMENT((i) >= 0 && (i) < compiler->logical_local_size); \
+	else { \
+		CHECK_ARGUMENT((p) & SLJIT_MEM); \
+		CHECK_ARGUMENT(FUNCTION_CHECK_IS_REG_OR_UNUSED((p) & REG_MASK)); \
+		CHECK_NOT_VIRTUAL_REGISTER((p) & REG_MASK); \
 		if ((p) & OFFS_REG_MASK) { \
-			SLJIT_ASSERT(FUNCTION_CHECK_IS_REG(OFFS_REG(p))); \
-			FUNCTION_ASSERT_IF_VIRTUAL(OFFS_REG(p)); \
-			SLJIT_ASSERT(((p) & OFFS_REG_MASK) != TO_OFFS_REG(SLJIT_SP) && !(i & ~0x3)); \
-		} else \
-			SLJIT_ASSERT(OFFS_REG(p) == 0); \
-		SLJIT_ASSERT(!((p) & ~(SLJIT_MEM | SLJIT_IMM | REG_MASK | OFFS_REG_MASK))); \
-	} \
-	else \
-		SLJIT_ASSERT_STOP();
+			CHECK_ARGUMENT(((p) & REG_MASK) != SLJIT_UNUSED); \
+			CHECK_ARGUMENT(FUNCTION_CHECK_IS_REG(OFFS_REG(p))); \
+			CHECK_NOT_VIRTUAL_REGISTER(OFFS_REG(p)); \
+			CHECK_ARGUMENT(((p) & OFFS_REG_MASK) != TO_OFFS_REG(SLJIT_SP) && !(i & ~0x3)); \
+		} \
+		CHECK_ARGUMENT(!((p) & ~(SLJIT_MEM | SLJIT_IMM | REG_MASK | OFFS_REG_MASK))); \
+	}
 
 #define FUNCTION_CHECK_OP1() \
 	if (GET_OPCODE(op) >= SLJIT_MOVU && GET_OPCODE(op) <= SLJIT_MOVU_P) { \
-		SLJIT_ASSERT(!(src & SLJIT_MEM) || (src & REG_MASK) != SLJIT_SP); \
-		SLJIT_ASSERT(!(dst & SLJIT_MEM) || (dst & REG_MASK) != SLJIT_SP); \
+		CHECK_ARGUMENT(!(src & SLJIT_MEM) || (src & REG_MASK) != SLJIT_SP); \
+		CHECK_ARGUMENT(!(dst & SLJIT_MEM) || (dst & REG_MASK) != SLJIT_SP); \
 		if ((src & SLJIT_MEM) && (src & REG_MASK)) \
-			SLJIT_ASSERT((dst & REG_MASK) != (src & REG_MASK) && OFFS_REG(dst) != (src & REG_MASK)); \
+			CHECK_ARGUMENT((dst & REG_MASK) != (src & REG_MASK) && OFFS_REG(dst) != (src & REG_MASK)); \
 	}
 
-#endif
+#endif /* SLJIT_ARGUMENT_CHECKS */
 
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 
@@ -803,14 +846,14 @@
 
 static SLJIT_CONST char* op0_names[] = {
 	(char*)"breakpoint", (char*)"nop",
-	(char*)"umul", (char*)"smul", (char*)"udiv", (char*)"sdiv",
+	(char*)"lumul", (char*)"lsmul", (char*)"ludiv", (char*)"lsdiv",
 };
 
 static SLJIT_CONST char* op1_names[] = {
-	(char*)"mov", (char*)"mov.ub", (char*)"mov.sb", (char*)"mov.uh",
-	(char*)"mov.sh", (char*)"mov.ui", (char*)"mov.si", (char*)"mov.p",
-	(char*)"movu", (char*)"movu.ub", (char*)"movu.sb", (char*)"movu.uh",
-	(char*)"movu.sh", (char*)"movu.ui", (char*)"movu.si", (char*)"movu.p",
+	(char*)"mov", (char*)"mov_ub", (char*)"mov_sb", (char*)"mov_uh",
+	(char*)"mov_sh", (char*)"mov_ui", (char*)"mov_si", (char*)"mov_p",
+	(char*)"movu", (char*)"movu_ub", (char*)"movu_sb", (char*)"movu_uh",
+	(char*)"movu_sh", (char*)"movu_ui", (char*)"movu_si", (char*)"movu_p",
 	(char*)"not", (char*)"neg", (char*)"clz",
 };
 
@@ -830,6 +873,10 @@
 	(char*)"add", (char*)"sub", (char*)"mul", (char*)"div"
 };
 
+#define JUMP_PREFIX(type) \
+	((type & 0xff) <= SLJIT_MUL_NOT_OVERFLOW ? ((type & SLJIT_INT_OP) ? "i_" : "") \
+	: ((type & 0xff) <= SLJIT_D_ORDERED ? ((type & SLJIT_SINGLE_OP) ? "s_" : "d_") : ""))
+
 static char* jump_names[] = {
 	(char*)"equal", (char*)"not_equal",
 	(char*)"less", (char*)"greater_equal",
@@ -838,123 +885,108 @@
 	(char*)"sig_greater", (char*)"sig_less_equal",
 	(char*)"overflow", (char*)"not_overflow",
 	(char*)"mul_overflow", (char*)"mul_not_overflow",
-	(char*)"float_equal", (char*)"float_not_equal",
-	(char*)"float_less", (char*)"float_greater_equal",
-	(char*)"float_greater", (char*)"float_less_equal",
-	(char*)"float_unordered", (char*)"float_ordered",
+	(char*)"equal", (char*)"not_equal",
+	(char*)"less", (char*)"greater_equal",
+	(char*)"greater", (char*)"less_equal",
+	(char*)"unordered", (char*)"ordered",
 	(char*)"jump", (char*)"fast_call",
 	(char*)"call0", (char*)"call1", (char*)"call2", (char*)"call3"
 };
 
-#endif
+#endif /* SLJIT_VERBOSE */
 
 /* --------------------------------------------------------------------- */
 /*  Arch dependent                                                       */
 /* --------------------------------------------------------------------- */
 
-static SLJIT_INLINE void check_sljit_generate_code(struct sljit_compiler *compiler)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS) \
+	|| (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
+
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_generate_code(struct sljit_compiler *compiler)
 {
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 	struct sljit_jump *jump;
 #endif
-	/* If debug and verbose are disabled, all arguments are unused. */
+
 	SLJIT_UNUSED_ARG(compiler);
 
-	SLJIT_ASSERT(compiler->size > 0);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(compiler->size > 0);
 	jump = compiler->jumps;
 	while (jump) {
 		/* All jumps have target. */
-		SLJIT_ASSERT(jump->flags & (JUMP_LABEL | JUMP_ADDR));
+		CHECK_ARGUMENT(jump->flags & (JUMP_LABEL | JUMP_ADDR));
 		jump = jump->next;
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_enter(struct sljit_compiler *compiler,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_enter(struct sljit_compiler *compiler,
 	sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
 	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
 	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(options);
-	SLJIT_UNUSED_ARG(args);
-	SLJIT_UNUSED_ARG(scratches);
-	SLJIT_UNUSED_ARG(saveds);
-	SLJIT_UNUSED_ARG(fscratches);
-	SLJIT_UNUSED_ARG(fsaveds);
-	SLJIT_UNUSED_ARG(local_size);
 
-	SLJIT_ASSERT(options == 0);
-	SLJIT_ASSERT(args >= 0 && args <= 3);
-	SLJIT_ASSERT(scratches >= 0 && scratches <= SLJIT_NUMBER_OF_REGISTERS);
-	SLJIT_ASSERT(saveds >= 0 && saveds <= SLJIT_NUMBER_OF_REGISTERS);
-	SLJIT_ASSERT(scratches + saveds <= SLJIT_NUMBER_OF_REGISTERS);
-	SLJIT_ASSERT(args <= saveds);
-	SLJIT_ASSERT(fscratches >= 0 && fscratches <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
-	SLJIT_ASSERT(fsaveds >= 0 && fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
-	SLJIT_ASSERT(fscratches + fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
-	SLJIT_ASSERT(local_size >= 0 && local_size <= SLJIT_MAX_LOCAL_SIZE);
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(!(options & ~SLJIT_DOUBLE_ALIGNMENT));
+	CHECK_ARGUMENT(args >= 0 && args <= 3);
+	CHECK_ARGUMENT(scratches >= 0 && scratches <= SLJIT_NUMBER_OF_REGISTERS);
+	CHECK_ARGUMENT(saveds >= 0 && saveds <= SLJIT_NUMBER_OF_REGISTERS);
+	CHECK_ARGUMENT(scratches + saveds <= SLJIT_NUMBER_OF_REGISTERS);
+	CHECK_ARGUMENT(args <= saveds);
+	CHECK_ARGUMENT(fscratches >= 0 && fscratches <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+	CHECK_ARGUMENT(fsaveds >= 0 && fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+	CHECK_ARGUMENT(fscratches + fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+	CHECK_ARGUMENT(local_size >= 0 && local_size <= SLJIT_MAX_LOCAL_SIZE);
+#endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	if (SLJIT_UNLIKELY(!!compiler->verbose))
 		fprintf(compiler->verbose, "  enter options:none args:%d scratches:%d saveds:%d fscratches:%d fsaveds:%d local_size:%d\n",
 			args, scratches, saveds, fscratches, fsaveds, local_size);
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_set_context(struct sljit_compiler *compiler,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_set_context(struct sljit_compiler *compiler,
 	sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
 	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(options);
-	SLJIT_UNUSED_ARG(args);
-	SLJIT_UNUSED_ARG(scratches);
-	SLJIT_UNUSED_ARG(saveds);
-	SLJIT_UNUSED_ARG(fscratches);
-	SLJIT_UNUSED_ARG(fsaveds);
-	SLJIT_UNUSED_ARG(local_size);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
 	if (SLJIT_UNLIKELY(compiler->skip_checks)) {
 		compiler->skip_checks = 0;
-		return;
+		CHECK_RETURN_OK;
 	}
-#endif
 
-	SLJIT_ASSERT(options == 0);
-	SLJIT_ASSERT(args >= 0 && args <= 3);
-	SLJIT_ASSERT(scratches >= 0 && scratches <= SLJIT_NUMBER_OF_REGISTERS);
-	SLJIT_ASSERT(saveds >= 0 && saveds <= SLJIT_NUMBER_OF_REGISTERS);
-	SLJIT_ASSERT(scratches + saveds <= SLJIT_NUMBER_OF_REGISTERS);
-	SLJIT_ASSERT(args <= saveds);
-	SLJIT_ASSERT(fscratches >= 0 && fscratches <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
-	SLJIT_ASSERT(fsaveds >= 0 && fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
-	SLJIT_ASSERT(fscratches + fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
-	SLJIT_ASSERT(local_size >= 0 && local_size <= SLJIT_MAX_LOCAL_SIZE);
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(!(options & ~SLJIT_DOUBLE_ALIGNMENT));
+	CHECK_ARGUMENT(args >= 0 && args <= 3);
+	CHECK_ARGUMENT(scratches >= 0 && scratches <= SLJIT_NUMBER_OF_REGISTERS);
+	CHECK_ARGUMENT(saveds >= 0 && saveds <= SLJIT_NUMBER_OF_REGISTERS);
+	CHECK_ARGUMENT(scratches + saveds <= SLJIT_NUMBER_OF_REGISTERS);
+	CHECK_ARGUMENT(args <= saveds);
+	CHECK_ARGUMENT(fscratches >= 0 && fscratches <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+	CHECK_ARGUMENT(fsaveds >= 0 && fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+	CHECK_ARGUMENT(fscratches + fsaveds <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+	CHECK_ARGUMENT(local_size >= 0 && local_size <= SLJIT_MAX_LOCAL_SIZE);
+#endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	if (SLJIT_UNLIKELY(!!compiler->verbose))
 		fprintf(compiler->verbose, "  set_context options:none args:%d scratches:%d saveds:%d fscratches:%d fsaveds:%d local_size:%d\n",
 			args, scratches, saveds, fscratches, fsaveds, local_size);
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(op);
-	SLJIT_UNUSED_ARG(src);
-	SLJIT_UNUSED_ARG(srcw);
-
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(compiler->scratches >= 0);
 	if (op != SLJIT_UNUSED) {
-		SLJIT_ASSERT(op >= SLJIT_MOV && op <= SLJIT_MOV_P);
+		CHECK_ARGUMENT(op >= SLJIT_MOV && op <= SLJIT_MOV_P);
 		FUNCTION_CHECK_SRC(src, srcw);
 	}
 	else
-		SLJIT_ASSERT(src == 0 && srcw == 0);
+		CHECK_ARGUMENT(src == 0 && srcw == 0);
 #endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	if (SLJIT_UNLIKELY(!!compiler->verbose)) {
@@ -967,16 +999,12 @@
 		}
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(dst);
-	SLJIT_UNUSED_ARG(dstw);
-
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 	FUNCTION_CHECK_DST(dst, dstw);
 #endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
@@ -986,16 +1014,12 @@
 		fprintf(compiler->verbose, "\n");
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(src);
-	SLJIT_UNUSED_ARG(srcw);
-
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 	FUNCTION_CHECK_SRC(src, srcw);
 #endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
@@ -1005,44 +1029,34 @@
 		fprintf(compiler->verbose, "\n");
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(op);
-
-	SLJIT_ASSERT((op >= SLJIT_BREAKPOINT && op <= SLJIT_SMUL)
-		|| ((op & ~SLJIT_INT_OP) >= SLJIT_UDIV && (op & ~SLJIT_INT_OP) <= SLJIT_SDIV));
-	SLJIT_ASSERT(op < SLJIT_UMUL || compiler->scratches >= 2);
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT((op >= SLJIT_BREAKPOINT && op <= SLJIT_LSMUL)
+		|| ((op & ~SLJIT_INT_OP) >= SLJIT_LUDIV && (op & ~SLJIT_INT_OP) <= SLJIT_LSDIV));
+	CHECK_ARGUMENT(op < SLJIT_LUMUL || compiler->scratches >= 2);
+#endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	if (SLJIT_UNLIKELY(!!compiler->verbose))
 		fprintf(compiler->verbose, "  %s%s\n", !(op & SLJIT_INT_OP) ? "" : "i", op0_names[GET_OPCODE(op) - SLJIT_OP0_BASE]);
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_op1(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_op1(struct sljit_compiler *compiler, sljit_si op,
 	sljit_si dst, sljit_sw dstw,
 	sljit_si src, sljit_sw srcw)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(op);
-	SLJIT_UNUSED_ARG(dst);
-	SLJIT_UNUSED_ARG(dstw);
-	SLJIT_UNUSED_ARG(src);
-	SLJIT_UNUSED_ARG(srcw);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
 	if (SLJIT_UNLIKELY(compiler->skip_checks)) {
 		compiler->skip_checks = 0;
-		return;
+		CHECK_RETURN_OK;
 	}
-#endif
 
-	SLJIT_ASSERT(GET_OPCODE(op) >= SLJIT_MOV && GET_OPCODE(op) <= SLJIT_CLZ);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(GET_OPCODE(op) >= SLJIT_MOV && GET_OPCODE(op) <= SLJIT_CLZ);
 	FUNCTION_CHECK_OP();
 	FUNCTION_CHECK_SRC(src, srcw);
 	FUNCTION_CHECK_DST(dst, dstw);
@@ -1059,32 +1073,21 @@
 		fprintf(compiler->verbose, "\n");
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_op2(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_op2(struct sljit_compiler *compiler, sljit_si op,
 	sljit_si dst, sljit_sw dstw,
 	sljit_si src1, sljit_sw src1w,
 	sljit_si src2, sljit_sw src2w)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(op);
-	SLJIT_UNUSED_ARG(dst);
-	SLJIT_UNUSED_ARG(dstw);
-	SLJIT_UNUSED_ARG(src1);
-	SLJIT_UNUSED_ARG(src1w);
-	SLJIT_UNUSED_ARG(src2);
-	SLJIT_UNUSED_ARG(src2w);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
 	if (SLJIT_UNLIKELY(compiler->skip_checks)) {
 		compiler->skip_checks = 0;
-		return;
+		CHECK_RETURN_OK;
 	}
-#endif
 
-	SLJIT_ASSERT(GET_OPCODE(op) >= SLJIT_ADD && GET_OPCODE(op) <= SLJIT_ASHR);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(GET_OPCODE(op) >= SLJIT_ADD && GET_OPCODE(op) <= SLJIT_ASHR);
 	FUNCTION_CHECK_OP();
 	FUNCTION_CHECK_SRC(src1, src1w);
 	FUNCTION_CHECK_SRC(src2, src2w);
@@ -1103,152 +1106,134 @@
 		fprintf(compiler->verbose, "\n");
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_get_register_index(sljit_si reg)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_get_register_index(sljit_si reg)
 {
 	SLJIT_UNUSED_ARG(reg);
-	SLJIT_ASSERT(reg > 0 && reg <= SLJIT_NUMBER_OF_REGISTERS);
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(reg > 0 && reg <= SLJIT_NUMBER_OF_REGISTERS);
+#endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_get_float_register_index(sljit_si reg)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_get_float_register_index(sljit_si reg)
 {
 	SLJIT_UNUSED_ARG(reg);
-	SLJIT_ASSERT(reg > 0 && reg <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(reg > 0 && reg <= SLJIT_NUMBER_OF_FLOAT_REGISTERS);
+#endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_op_custom(struct sljit_compiler *compiler,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_op_custom(struct sljit_compiler *compiler,
 	void *instruction, sljit_si size)
 {
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
+	int i;
+#endif
+
 	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(instruction);
-	SLJIT_UNUSED_ARG(size);
-	SLJIT_ASSERT(instruction);
+
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(instruction);
+#if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86)
+	CHECK_ARGUMENT(size > 0 && size < 16);
+#elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
+	CHECK_ARGUMENT((size == 2 && (((sljit_sw)instruction) & 0x1) == 0)
+		|| (size == 4 && (((sljit_sw)instruction) & 0x3) == 0));
+#else
+	CHECK_ARGUMENT(size == 4 && (((sljit_sw)instruction) & 0x3) == 0);
+#endif
+
+#endif
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
+	if (SLJIT_UNLIKELY(!!compiler->verbose)) {
+		fprintf(compiler->verbose, "  op_custom");
+		for (i = 0; i < size; i++)
+			fprintf(compiler->verbose, " 0x%x", ((sljit_ub*)instruction)[i]);
+		fprintf(compiler->verbose, "\n");
+	}
+#endif
+	CHECK_RETURN_OK;
 }
 
-#define SELECT_FOP1_OPERATION_WITH_CHECKS(compiler, op, dst, dstw, src, srcw) \
-	SLJIT_ASSERT(sljit_is_fpu_available()); \
-	SLJIT_COMPILE_ASSERT(!(SLJIT_CONVW_FROMD & 0x1) && !(SLJIT_CONVD_FROMW & 0x1), \
-		invalid_float_opcodes); \
-	if (GET_OPCODE(op) >= SLJIT_CONVW_FROMD && GET_OPCODE(op) <= SLJIT_CMPD) { \
-		if (GET_OPCODE(op) == SLJIT_CMPD) { \
-			check_sljit_emit_fop1_cmp(compiler, op, dst, dstw, src, srcw); \
-			ADJUST_LOCAL_OFFSET(dst, dstw); \
-			ADJUST_LOCAL_OFFSET(src, srcw); \
-			return sljit_emit_fop1_cmp(compiler, op, dst, dstw, src, srcw); \
-		} \
-		if ((GET_OPCODE(op) | 0x1) == SLJIT_CONVI_FROMD) { \
-			check_sljit_emit_fop1_convw_fromd(compiler, op, dst, dstw, src, srcw); \
-			ADJUST_LOCAL_OFFSET(dst, dstw); \
-			ADJUST_LOCAL_OFFSET(src, srcw); \
-			return sljit_emit_fop1_convw_fromd(compiler, op, dst, dstw, src, srcw); \
-		} \
-		check_sljit_emit_fop1_convd_fromw(compiler, op, dst, dstw, src, srcw); \
-		ADJUST_LOCAL_OFFSET(dst, dstw); \
-		ADJUST_LOCAL_OFFSET(src, srcw); \
-		return sljit_emit_fop1_convd_fromw(compiler, op, dst, dstw, src, srcw); \
-	} \
-	check_sljit_emit_fop1(compiler, op, dst, dstw, src, srcw); \
-	ADJUST_LOCAL_OFFSET(dst, dstw); \
-	ADJUST_LOCAL_OFFSET(src, srcw);
-
-static SLJIT_INLINE void check_sljit_emit_fop1(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fop1(struct sljit_compiler *compiler, sljit_si op,
 	sljit_si dst, sljit_sw dstw,
 	sljit_si src, sljit_sw srcw)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(op);
-	SLJIT_UNUSED_ARG(dst);
-	SLJIT_UNUSED_ARG(dstw);
-	SLJIT_UNUSED_ARG(src);
-	SLJIT_UNUSED_ARG(srcw);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
 	if (SLJIT_UNLIKELY(compiler->skip_checks)) {
 		compiler->skip_checks = 0;
-		return;
+		CHECK_RETURN_OK;
 	}
-#endif
 
-	SLJIT_ASSERT(GET_OPCODE(op) >= SLJIT_MOVD && GET_OPCODE(op) <= SLJIT_ABSD);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(sljit_is_fpu_available());
+	CHECK_ARGUMENT(GET_OPCODE(op) >= SLJIT_DMOV && GET_OPCODE(op) <= SLJIT_DABS);
 	FUNCTION_CHECK_FOP();
 	FUNCTION_FCHECK(src, srcw);
 	FUNCTION_FCHECK(dst, dstw);
 #endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	if (SLJIT_UNLIKELY(!!compiler->verbose)) {
-		fprintf(compiler->verbose, "  %s%s ", fop1_names[GET_OPCODE(op) - SLJIT_FOP1_BASE],
-			(GET_OPCODE(op) == SLJIT_CONVD_FROMS)
-			? ((op & SLJIT_SINGLE_OP) ? "s.fromd" : "d.froms")
-			: ((op & SLJIT_SINGLE_OP) ? "s" : "d"));
+		if (GET_OPCODE(op) == SLJIT_CONVD_FROMS)
+			fprintf(compiler->verbose, "  %s%s ", fop1_names[SLJIT_CONVD_FROMS - SLJIT_FOP1_BASE],
+				(op & SLJIT_SINGLE_OP) ? "s.fromd" : "d.froms");
+		else
+			fprintf(compiler->verbose, "  %s%s ", (op & SLJIT_SINGLE_OP) ? "s" : "d",
+				fop1_names[GET_OPCODE(op) - SLJIT_FOP1_BASE]);
+
 		sljit_verbose_fparam(compiler, dst, dstw);
 		fprintf(compiler->verbose, ", ");
 		sljit_verbose_fparam(compiler, src, srcw);
 		fprintf(compiler->verbose, "\n");
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_fop1_cmp(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fop1_cmp(struct sljit_compiler *compiler, sljit_si op,
 	sljit_si src1, sljit_sw src1w,
 	sljit_si src2, sljit_sw src2w)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(op);
-	SLJIT_UNUSED_ARG(src1);
-	SLJIT_UNUSED_ARG(src1w);
-	SLJIT_UNUSED_ARG(src2);
-	SLJIT_UNUSED_ARG(src2w);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
 	if (SLJIT_UNLIKELY(compiler->skip_checks)) {
 		compiler->skip_checks = 0;
-		return;
+		CHECK_RETURN_OK;
 	}
-#endif
 
-	SLJIT_ASSERT(GET_OPCODE(op) == SLJIT_CMPD);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(sljit_is_fpu_available());
+	CHECK_ARGUMENT(GET_OPCODE(op) == SLJIT_DCMP);
 	FUNCTION_CHECK_FOP();
 	FUNCTION_FCHECK(src1, src1w);
 	FUNCTION_FCHECK(src2, src2w);
 #endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	if (SLJIT_UNLIKELY(!!compiler->verbose)) {
-		fprintf(compiler->verbose, "  %s%s%s%s ", fop1_names[GET_OPCODE(op) - SLJIT_FOP1_BASE], (op & SLJIT_SINGLE_OP) ? "s" : "d",
-			!(op & SLJIT_SET_E) ? "" : ".e", !(op & SLJIT_SET_S) ? "" : ".s");
+		fprintf(compiler->verbose, "  %s%s%s%s ", (op & SLJIT_SINGLE_OP) ? "s" : "d", fop1_names[SLJIT_DCMP - SLJIT_FOP1_BASE],
+			(op & SLJIT_SET_E) ? ".e" : "", (op & SLJIT_SET_S) ? ".s" : "");
 		sljit_verbose_fparam(compiler, src1, src1w);
 		fprintf(compiler->verbose, ", ");
 		sljit_verbose_fparam(compiler, src2, src2w);
 		fprintf(compiler->verbose, "\n");
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_fop1_convw_fromd(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fop1_convw_fromd(struct sljit_compiler *compiler, sljit_si op,
 	sljit_si dst, sljit_sw dstw,
 	sljit_si src, sljit_sw srcw)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(op);
-	SLJIT_UNUSED_ARG(dst);
-	SLJIT_UNUSED_ARG(dstw);
-	SLJIT_UNUSED_ARG(src);
-	SLJIT_UNUSED_ARG(srcw);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
 	if (SLJIT_UNLIKELY(compiler->skip_checks)) {
 		compiler->skip_checks = 0;
-		return;
+		CHECK_RETURN_OK;
 	}
-#endif
 
-	SLJIT_ASSERT(GET_OPCODE(op) >= SLJIT_CONVW_FROMD && GET_OPCODE(op) <= SLJIT_CONVI_FROMD);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(sljit_is_fpu_available());
+	CHECK_ARGUMENT(GET_OPCODE(op) >= SLJIT_CONVW_FROMD && GET_OPCODE(op) <= SLJIT_CONVI_FROMD);
 	FUNCTION_CHECK_FOP();
 	FUNCTION_FCHECK(src, srcw);
 	FUNCTION_CHECK_DST(dst, dstw);
@@ -1264,29 +1249,21 @@
 		fprintf(compiler->verbose, "\n");
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_fop1_convd_fromw(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fop1_convd_fromw(struct sljit_compiler *compiler, sljit_si op,
 	sljit_si dst, sljit_sw dstw,
 	sljit_si src, sljit_sw srcw)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(op);
-	SLJIT_UNUSED_ARG(dst);
-	SLJIT_UNUSED_ARG(dstw);
-	SLJIT_UNUSED_ARG(src);
-	SLJIT_UNUSED_ARG(srcw);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
 	if (SLJIT_UNLIKELY(compiler->skip_checks)) {
 		compiler->skip_checks = 0;
-		return;
+		CHECK_RETURN_OK;
 	}
-#endif
 
-	SLJIT_ASSERT(GET_OPCODE(op) >= SLJIT_CONVD_FROMW && GET_OPCODE(op) <= SLJIT_CONVD_FROMI);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(sljit_is_fpu_available());
+	CHECK_ARGUMENT(GET_OPCODE(op) >= SLJIT_CONVD_FROMW && GET_OPCODE(op) <= SLJIT_CONVD_FROMI);
 	FUNCTION_CHECK_FOP();
 	FUNCTION_CHECK_SRC(src, srcw);
 	FUNCTION_FCHECK(dst, dstw);
@@ -1302,26 +1279,17 @@
 		fprintf(compiler->verbose, "\n");
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_fop2(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fop2(struct sljit_compiler *compiler, sljit_si op,
 	sljit_si dst, sljit_sw dstw,
 	sljit_si src1, sljit_sw src1w,
 	sljit_si src2, sljit_sw src2w)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(op);
-	SLJIT_UNUSED_ARG(dst);
-	SLJIT_UNUSED_ARG(dstw);
-	SLJIT_UNUSED_ARG(src1);
-	SLJIT_UNUSED_ARG(src1w);
-	SLJIT_UNUSED_ARG(src2);
-	SLJIT_UNUSED_ARG(src2w);
-
-	SLJIT_ASSERT(sljit_is_fpu_available());
-	SLJIT_ASSERT(GET_OPCODE(op) >= SLJIT_ADDD && GET_OPCODE(op) <= SLJIT_DIVD);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(sljit_is_fpu_available());
+	CHECK_ARGUMENT(GET_OPCODE(op) >= SLJIT_DADD && GET_OPCODE(op) <= SLJIT_DDIV);
 	FUNCTION_CHECK_FOP();
 	FUNCTION_FCHECK(src1, src1w);
 	FUNCTION_FCHECK(src2, src2w);
@@ -1329,7 +1297,7 @@
 #endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	if (SLJIT_UNLIKELY(!!compiler->verbose)) {
-		fprintf(compiler->verbose, "  %s%s ", fop2_names[GET_OPCODE(op) - SLJIT_FOP2_BASE], (op & SLJIT_SINGLE_OP) ? "s" : "d");
+		fprintf(compiler->verbose, "  %s%s ", (op & SLJIT_SINGLE_OP) ? "s" : "d", fop2_names[GET_OPCODE(op) - SLJIT_FOP2_BASE]);
 		sljit_verbose_fparam(compiler, dst, dstw);
 		fprintf(compiler->verbose, ", ");
 		sljit_verbose_fparam(compiler, src1, src1w);
@@ -1338,115 +1306,98 @@
 		fprintf(compiler->verbose, "\n");
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_label(struct sljit_compiler *compiler)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_label(struct sljit_compiler *compiler)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
 	SLJIT_UNUSED_ARG(compiler);
 
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	if (SLJIT_UNLIKELY(!!compiler->verbose))
 		fprintf(compiler->verbose, "label:\n");
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_jump(struct sljit_compiler *compiler, sljit_si type)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_jump(struct sljit_compiler *compiler, sljit_si type)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(type);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
 	if (SLJIT_UNLIKELY(compiler->skip_checks)) {
 		compiler->skip_checks = 0;
-		return;
+		CHECK_RETURN_OK;
 	}
-#endif
 
-	SLJIT_ASSERT(!(type & ~(0xff | SLJIT_REWRITABLE_JUMP)));
-	SLJIT_ASSERT((type & 0xff) >= SLJIT_C_EQUAL && (type & 0xff) <= SLJIT_CALL3);
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(!(type & ~(0xff | SLJIT_REWRITABLE_JUMP | SLJIT_INT_OP)));
+	CHECK_ARGUMENT((type & 0xff) >= SLJIT_EQUAL && (type & 0xff) <= SLJIT_CALL3);
+	CHECK_ARGUMENT((type & 0xff) < SLJIT_JUMP || !(type & SLJIT_INT_OP));
+	CHECK_ARGUMENT((type & 0xff) <= SLJIT_CALL0 || ((type & 0xff) - SLJIT_CALL0) <= compiler->scratches);
+#endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	if (SLJIT_UNLIKELY(!!compiler->verbose))
-		fprintf(compiler->verbose, "  jump%s.%s\n", !(type & SLJIT_REWRITABLE_JUMP) ? "" : ".r", jump_names[type & 0xff]);
+		fprintf(compiler->verbose, "  jump%s.%s%s\n", !(type & SLJIT_REWRITABLE_JUMP) ? "" : ".r",
+			JUMP_PREFIX(type), jump_names[type & 0xff]);
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_cmp(struct sljit_compiler *compiler, sljit_si type,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_cmp(struct sljit_compiler *compiler, sljit_si type,
 	sljit_si src1, sljit_sw src1w,
 	sljit_si src2, sljit_sw src2w)
 {
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(type);
-	SLJIT_UNUSED_ARG(src1);
-	SLJIT_UNUSED_ARG(src1w);
-	SLJIT_UNUSED_ARG(src2);
-	SLJIT_UNUSED_ARG(src2w);
-
-	SLJIT_ASSERT(!(type & ~(0xff | SLJIT_REWRITABLE_JUMP | SLJIT_INT_OP)));
-	SLJIT_ASSERT((type & 0xff) >= SLJIT_C_EQUAL && (type & 0xff) <= SLJIT_C_SIG_LESS_EQUAL);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(!(type & ~(0xff | SLJIT_REWRITABLE_JUMP | SLJIT_INT_OP)));
+	CHECK_ARGUMENT((type & 0xff) >= SLJIT_EQUAL && (type & 0xff) <= SLJIT_SIG_LESS_EQUAL);
 	FUNCTION_CHECK_SRC(src1, src1w);
 	FUNCTION_CHECK_SRC(src2, src2w);
 #endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	if (SLJIT_UNLIKELY(!!compiler->verbose)) {
-		fprintf(compiler->verbose, "  %scmp%s.%s ", !(type & SLJIT_INT_OP) ? "" : "i", !(type & SLJIT_REWRITABLE_JUMP) ? "" : ".r", jump_names[type & 0xff]);
+		fprintf(compiler->verbose, "  cmp%s.%s%s ", !(type & SLJIT_REWRITABLE_JUMP) ? "" : ".r",
+			(type & SLJIT_INT_OP) ? "i_" : "", jump_names[type & 0xff]);
 		sljit_verbose_param(compiler, src1, src1w);
 		fprintf(compiler->verbose, ", ");
 		sljit_verbose_param(compiler, src2, src2w);
 		fprintf(compiler->verbose, "\n");
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_fcmp(struct sljit_compiler *compiler, sljit_si type,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_fcmp(struct sljit_compiler *compiler, sljit_si type,
 	sljit_si src1, sljit_sw src1w,
 	sljit_si src2, sljit_sw src2w)
 {
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(type);
-	SLJIT_UNUSED_ARG(src1);
-	SLJIT_UNUSED_ARG(src1w);
-	SLJIT_UNUSED_ARG(src2);
-	SLJIT_UNUSED_ARG(src2w);
-
-	SLJIT_ASSERT(sljit_is_fpu_available());
-	SLJIT_ASSERT(!(type & ~(0xff | SLJIT_REWRITABLE_JUMP | SLJIT_SINGLE_OP)));
-	SLJIT_ASSERT((type & 0xff) >= SLJIT_C_FLOAT_EQUAL && (type & 0xff) <= SLJIT_C_FLOAT_ORDERED);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(sljit_is_fpu_available());
+	CHECK_ARGUMENT(!(type & ~(0xff | SLJIT_REWRITABLE_JUMP | SLJIT_SINGLE_OP)));
+	CHECK_ARGUMENT((type & 0xff) >= SLJIT_D_EQUAL && (type & 0xff) <= SLJIT_D_ORDERED);
 	FUNCTION_FCHECK(src1, src1w);
 	FUNCTION_FCHECK(src2, src2w);
 #endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	if (SLJIT_UNLIKELY(!!compiler->verbose)) {
-		fprintf(compiler->verbose, "  %scmp%s.%s ", (type & SLJIT_SINGLE_OP) ? "s" : "d",
-			!(type & SLJIT_REWRITABLE_JUMP) ? "" : ".r", jump_names[type & 0xff]);
+		fprintf(compiler->verbose, "  fcmp%s.%s%s ", !(type & SLJIT_REWRITABLE_JUMP) ? "" : ".r",
+			(type & SLJIT_SINGLE_OP) ? "s_" : "d_", jump_names[type & 0xff]);
 		sljit_verbose_fparam(compiler, src1, src1w);
 		fprintf(compiler->verbose, ", ");
 		sljit_verbose_fparam(compiler, src2, src2w);
 		fprintf(compiler->verbose, "\n");
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_ijump(struct sljit_compiler *compiler, sljit_si type, sljit_si src, sljit_sw srcw)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_ijump(struct sljit_compiler *compiler, sljit_si type, sljit_si src, sljit_sw srcw)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(type);
-	SLJIT_UNUSED_ARG(src);
-	SLJIT_UNUSED_ARG(srcw);
-
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
 	if (SLJIT_UNLIKELY(compiler->skip_checks)) {
 		compiler->skip_checks = 0;
-		return;
+		CHECK_RETURN_OK;
 	}
-#endif
 
-	SLJIT_ASSERT(type >= SLJIT_JUMP && type <= SLJIT_CALL3);
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(type >= SLJIT_JUMP && type <= SLJIT_CALL3);
+	CHECK_ARGUMENT(type <= SLJIT_CALL0 || (type - SLJIT_CALL0) <= compiler->scratches);
 	FUNCTION_CHECK_SRC(src, srcw);
 #endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
@@ -1456,38 +1407,31 @@
 		fprintf(compiler->verbose, "\n");
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_op_flags(struct sljit_compiler *compiler, sljit_si op,
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_op_flags(struct sljit_compiler *compiler, sljit_si op,
 	sljit_si dst, sljit_sw dstw,
 	sljit_si src, sljit_sw srcw,
 	sljit_si type)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(op);
-	SLJIT_UNUSED_ARG(dst);
-	SLJIT_UNUSED_ARG(dstw);
-	SLJIT_UNUSED_ARG(src);
-	SLJIT_UNUSED_ARG(srcw);
-	SLJIT_UNUSED_ARG(type);
-
-	SLJIT_ASSERT(type >= SLJIT_C_EQUAL && type < SLJIT_JUMP);
-	SLJIT_ASSERT(op == SLJIT_MOV || GET_OPCODE(op) == SLJIT_MOV_UI || GET_OPCODE(op) == SLJIT_MOV_SI
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
+	CHECK_ARGUMENT(!(type & ~(0xff | SLJIT_INT_OP)));
+	CHECK_ARGUMENT((type & 0xff) >= SLJIT_EQUAL && (type & 0xff) <= SLJIT_D_ORDERED);
+	CHECK_ARGUMENT(op == SLJIT_MOV || GET_OPCODE(op) == SLJIT_MOV_UI || GET_OPCODE(op) == SLJIT_MOV_SI
 		|| (GET_OPCODE(op) >= SLJIT_AND && GET_OPCODE(op) <= SLJIT_XOR));
-	SLJIT_ASSERT((op & (SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C)) == 0);
-	SLJIT_ASSERT((op & (SLJIT_SET_E | SLJIT_KEEP_FLAGS)) != (SLJIT_SET_E | SLJIT_KEEP_FLAGS));
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+	CHECK_ARGUMENT((op & (SLJIT_SET_U | SLJIT_SET_S | SLJIT_SET_O | SLJIT_SET_C)) == 0);
+	CHECK_ARGUMENT((op & (SLJIT_SET_E | SLJIT_KEEP_FLAGS)) != (SLJIT_SET_E | SLJIT_KEEP_FLAGS));
 	if (GET_OPCODE(op) < SLJIT_ADD) {
-		SLJIT_ASSERT(src == SLJIT_UNUSED && srcw == 0);
+		CHECK_ARGUMENT(src == SLJIT_UNUSED && srcw == 0);
 	} else {
-		SLJIT_ASSERT(src == dst && srcw == dstw);
+		CHECK_ARGUMENT(src == dst && srcw == dstw);
 	}
 	FUNCTION_CHECK_DST(dst, dstw);
 #endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	if (SLJIT_UNLIKELY(!!compiler->verbose)) {
-		fprintf(compiler->verbose, "  %sflags.%s%s%s ", !(op & SLJIT_INT_OP) ? "" : "i",
+		fprintf(compiler->verbose, "  flags.%s%s%s%s ", !(op & SLJIT_INT_OP) ? "" : "i",
 			GET_OPCODE(op) >= SLJIT_OP2_BASE ? op2_names[GET_OPCODE(op) - SLJIT_OP2_BASE] : op1_names[GET_OPCODE(op) - SLJIT_OP1_BASE],
 			!(op & SLJIT_SET_E) ? "" : ".e", !(op & SLJIT_KEEP_FLAGS) ? "" : ".k");
 		sljit_verbose_param(compiler, dst, dstw);
@@ -1495,19 +1439,15 @@
 			fprintf(compiler->verbose, ", ");
 			sljit_verbose_param(compiler, src, srcw);
 		}
-		fprintf(compiler->verbose, ", %s\n", jump_names[type]);
+		fprintf(compiler->verbose, ", %s%s\n", JUMP_PREFIX(type), jump_names[type & 0xff]);
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_get_local_base(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw offset)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_get_local_base(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw offset)
 {
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(dst);
-	SLJIT_UNUSED_ARG(dstw);
-	SLJIT_UNUSED_ARG(offset);
-
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 	FUNCTION_CHECK_DST(dst, dstw);
 #endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
@@ -1517,17 +1457,12 @@
 		fprintf(compiler->verbose, ", #%" SLJIT_PRINT_D "d\n", offset);
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
-static SLJIT_INLINE void check_sljit_emit_const(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw init_value)
+static SLJIT_INLINE CHECK_RETURN_TYPE check_sljit_emit_const(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw init_value)
 {
-	/* If debug and verbose are disabled, all arguments are unused. */
-	SLJIT_UNUSED_ARG(compiler);
-	SLJIT_UNUSED_ARG(dst);
-	SLJIT_UNUSED_ARG(dstw);
-	SLJIT_UNUSED_ARG(init_value);
-
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 	FUNCTION_CHECK_DST(dst, dstw);
 #endif
 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
@@ -1537,8 +1472,36 @@
 		fprintf(compiler->verbose, ", #%" SLJIT_PRINT_D "d\n", init_value);
 	}
 #endif
+	CHECK_RETURN_OK;
 }
 
+#endif /* SLJIT_ARGUMENT_CHECKS || SLJIT_VERBOSE */
+
+#define SELECT_FOP1_OPERATION_WITH_CHECKS(compiler, op, dst, dstw, src, srcw) \
+	SLJIT_COMPILE_ASSERT(!(SLJIT_CONVW_FROMD & 0x1) && !(SLJIT_CONVD_FROMW & 0x1), \
+		invalid_float_opcodes); \
+	if (GET_OPCODE(op) >= SLJIT_CONVW_FROMD && GET_OPCODE(op) <= SLJIT_DCMP) { \
+		if (GET_OPCODE(op) == SLJIT_DCMP) { \
+			CHECK(check_sljit_emit_fop1_cmp(compiler, op, dst, dstw, src, srcw)); \
+			ADJUST_LOCAL_OFFSET(dst, dstw); \
+			ADJUST_LOCAL_OFFSET(src, srcw); \
+			return sljit_emit_fop1_cmp(compiler, op, dst, dstw, src, srcw); \
+		} \
+		if ((GET_OPCODE(op) | 0x1) == SLJIT_CONVI_FROMD) { \
+			CHECK(check_sljit_emit_fop1_convw_fromd(compiler, op, dst, dstw, src, srcw)); \
+			ADJUST_LOCAL_OFFSET(dst, dstw); \
+			ADJUST_LOCAL_OFFSET(src, srcw); \
+			return sljit_emit_fop1_convw_fromd(compiler, op, dst, dstw, src, srcw); \
+		} \
+		CHECK(check_sljit_emit_fop1_convd_fromw(compiler, op, dst, dstw, src, srcw)); \
+		ADJUST_LOCAL_OFFSET(dst, dstw); \
+		ADJUST_LOCAL_OFFSET(src, srcw); \
+		return sljit_emit_fop1_convd_fromw(compiler, op, dst, dstw, src, srcw); \
+	} \
+	CHECK(check_sljit_emit_fop1(compiler, op, dst, dstw, src, srcw)); \
+	ADJUST_LOCAL_OFFSET(dst, dstw); \
+	ADJUST_LOCAL_OFFSET(src, srcw);
+
 static SLJIT_INLINE sljit_si emit_mov_before_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
 {
 	/* Return if don't need to do anything. */
@@ -1554,7 +1517,8 @@
 		return SLJIT_SUCCESS;
 #endif
 
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS) \
+		|| (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	compiler->skip_checks = 1;
 #endif
 	return sljit_emit_op1(compiler, op, SLJIT_RETURN_REG, 0, src, srcw);
@@ -1617,11 +1581,11 @@
 	sljit_sw tmp_srcw;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_cmp(compiler, type, src1, src1w, src2, src2w);
+	CHECK_PTR(check_sljit_emit_cmp(compiler, type, src1, src1w, src2, src2w));
 
 	condition = type & 0xff;
 #if (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
-	if ((condition == SLJIT_C_EQUAL || condition == SLJIT_C_NOT_EQUAL)) {
+	if ((condition == SLJIT_EQUAL || condition == SLJIT_NOT_EQUAL)) {
 		if ((src1 & SLJIT_IMM) && !src1w) {
 			src1 = src2;
 			src1w = src2w;
@@ -1636,29 +1600,29 @@
 	if (SLJIT_UNLIKELY((src1 & SLJIT_IMM) && !(src2 & SLJIT_IMM))) {
 		/* Immediate is prefered as second argument by most architectures. */
 		switch (condition) {
-		case SLJIT_C_LESS:
-			condition = SLJIT_C_GREATER;
+		case SLJIT_LESS:
+			condition = SLJIT_GREATER;
 			break;
-		case SLJIT_C_GREATER_EQUAL:
-			condition = SLJIT_C_LESS_EQUAL;
+		case SLJIT_GREATER_EQUAL:
+			condition = SLJIT_LESS_EQUAL;
 			break;
-		case SLJIT_C_GREATER:
-			condition = SLJIT_C_LESS;
+		case SLJIT_GREATER:
+			condition = SLJIT_LESS;
 			break;
-		case SLJIT_C_LESS_EQUAL:
-			condition = SLJIT_C_GREATER_EQUAL;
+		case SLJIT_LESS_EQUAL:
+			condition = SLJIT_GREATER_EQUAL;
 			break;
-		case SLJIT_C_SIG_LESS:
-			condition = SLJIT_C_SIG_GREATER;
+		case SLJIT_SIG_LESS:
+			condition = SLJIT_SIG_GREATER;
 			break;
-		case SLJIT_C_SIG_GREATER_EQUAL:
-			condition = SLJIT_C_SIG_LESS_EQUAL;
+		case SLJIT_SIG_GREATER_EQUAL:
+			condition = SLJIT_SIG_LESS_EQUAL;
 			break;
-		case SLJIT_C_SIG_GREATER:
-			condition = SLJIT_C_SIG_LESS;
+		case SLJIT_SIG_GREATER:
+			condition = SLJIT_SIG_LESS;
 			break;
-		case SLJIT_C_SIG_LESS_EQUAL:
-			condition = SLJIT_C_SIG_GREATER_EQUAL;
+		case SLJIT_SIG_LESS_EQUAL:
+			condition = SLJIT_SIG_GREATER_EQUAL;
 			break;
 		}
 		type = condition | (type & (SLJIT_INT_OP | SLJIT_REWRITABLE_JUMP));
@@ -1670,19 +1634,21 @@
 		src2w = tmp_srcw;
 	}
 
-	if (condition <= SLJIT_C_NOT_ZERO)
+	if (condition <= SLJIT_NOT_ZERO)
 		flags = SLJIT_SET_E;
-	else if (condition <= SLJIT_C_LESS_EQUAL)
+	else if (condition <= SLJIT_LESS_EQUAL)
 		flags = SLJIT_SET_U;
 	else
 		flags = SLJIT_SET_S;
 
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+		|| (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 	compiler->skip_checks = 1;
 #endif
 	PTR_FAIL_IF(sljit_emit_op2(compiler, SLJIT_SUB | flags | (type & SLJIT_INT_OP),
 		SLJIT_UNUSED, 0, src1, src1w, src2, src2w));
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+		|| (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 	compiler->skip_checks = 1;
 #endif
 	return sljit_emit_jump(compiler, condition | (type & SLJIT_REWRITABLE_JUMP));
@@ -1694,19 +1660,22 @@
 {
 	sljit_si flags, condition;
 
-	check_sljit_emit_fcmp(compiler, type, src1, src1w, src2, src2w);
+	CHECK_ERROR_PTR();
+	CHECK_PTR(check_sljit_emit_fcmp(compiler, type, src1, src1w, src2, src2w));
 
 	condition = type & 0xff;
-	flags = (condition <= SLJIT_C_FLOAT_NOT_EQUAL) ? SLJIT_SET_E : SLJIT_SET_S;
+	flags = (condition <= SLJIT_D_NOT_EQUAL) ? SLJIT_SET_E : SLJIT_SET_S;
 	if (type & SLJIT_SINGLE_OP)
 		flags |= SLJIT_SINGLE_OP;
 
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+		|| (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 	compiler->skip_checks = 1;
 #endif
-	sljit_emit_fop1(compiler, SLJIT_CMPD | flags, src1, src1w, src2, src2w);
+	sljit_emit_fop1(compiler, SLJIT_DCMP | flags, src1, src1w, src2, src2w);
 
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+		|| (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 	compiler->skip_checks = 1;
 #endif
 	return sljit_emit_jump(compiler, condition | (type & SLJIT_REWRITABLE_JUMP));
@@ -1719,10 +1688,11 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_local_base(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw offset)
 {
 	CHECK_ERROR();
-	check_sljit_get_local_base(compiler, dst, dstw, offset);
+	CHECK(check_sljit_get_local_base(compiler, dst, dstw, offset));
 
 	ADJUST_LOCAL_OFFSET(SLJIT_MEM1(SLJIT_SP), offset);
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+		|| (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 	compiler->skip_checks = 1;
 #endif
 	if (offset != 0)
@@ -1799,7 +1769,7 @@
 	return SLJIT_ERR_UNSUPPORTED;
 }
 
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
 	sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
 	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
 {
@@ -1812,6 +1782,7 @@
 	SLJIT_UNUSED_ARG(fsaveds);
 	SLJIT_UNUSED_ARG(local_size);
 	SLJIT_ASSERT_STOP();
+	return SLJIT_ERR_UNSUPPORTED;
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
diff --git a/dist/sljit/sljitLir.h b/dist/sljit/sljitLir.h
index 9718871..24c0f60 100644
--- a/dist/sljit/sljitLir.h
+++ b/dist/sljit/sljitLir.h
@@ -95,8 +95,10 @@
 /* Cannot allocate executable memory.
    Only for sljit_generate_code() */
 #define SLJIT_ERR_EX_ALLOC_FAILED	3
-/* return value for SLJIT_CONFIG_UNSUPPORTED empty architecture. */
+/* Return value for SLJIT_CONFIG_UNSUPPORTED placeholder architecture. */
 #define SLJIT_ERR_UNSUPPORTED		4
+/* An ivalid argument is passed to any SLJIT function. */
+#define SLJIT_ERR_BAD_ARGUMENT		5
 
 /* --------------------------------------------------------------------- */
 /*  Registers                                                            */
@@ -305,6 +307,7 @@
 	struct sljit_jump *last_jump;
 	struct sljit_const *last_const;
 
+	void *allocator_data;
 	struct sljit_memory_fragment *buf;
 	struct sljit_memory_fragment *abuf;
 
@@ -359,7 +362,6 @@
 #endif
 
 #if (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
-	sljit_si locals_offset;
 	sljit_si cache_arg;
 	sljit_sw cache_argw;
 #endif
@@ -391,12 +393,15 @@
 	FILE* verbose;
 #endif
 
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS) \
+		|| (defined SLJIT_DEBUG && SLJIT_DEBUG)
 	/* Local size passed to the functions. */
 	sljit_si logical_local_size;
 #endif
 
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS) \
+		|| (defined SLJIT_DEBUG && SLJIT_DEBUG) \
+		|| (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
 	sljit_si skip_checks;
 #endif
 };
@@ -405,11 +410,16 @@
 /*  Main functions                                                       */
 /* --------------------------------------------------------------------- */
 
-/* Creates an sljit compiler.
-   Returns NULL if failed. */
-SLJIT_API_FUNC_ATTRIBUTE struct sljit_compiler* sljit_create_compiler(void);
+/* Creates an sljit compiler. The allocator_data is required by some
+   custom memory managers. This pointer is passed to SLJIT_MALLOC
+   and SLJIT_FREE macros. Most allocators (including the default
+   one) ignores this value, and it is recommended to pass NULL
+   as a dummy value for allocator_data.
 
-/* Free everything except the compiled machine code. */
+   Returns NULL if failed. */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_compiler* sljit_create_compiler(void *allocator_data);
+
+/* Frees everything except the compiled machine code. */
 SLJIT_API_FUNC_ATTRIBUTE void sljit_free_compiler(struct sljit_compiler *compiler);
 
 /* Returns the current error code. If an error is occurred, future sljit
@@ -419,6 +429,14 @@
    these checks increases the performance of the compiling process. */
 static SLJIT_INLINE sljit_si sljit_get_compiler_error(struct sljit_compiler *compiler) { return compiler->error; }
 
+/* Sets the compiler error code to SLJIT_ERR_ALLOC_FAILED except
+   if an error was detected before. After the error code is set
+   the compiler behaves as if the allocation failure happened
+   during an sljit function call. This can greatly simplify error
+   checking, since only the compiler status needs to be checked
+   after the compilation. */
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_compiler_memory_error(struct sljit_compiler *compiler);
+
 /*
    Allocate a small amount of memory. The size must be <= 64 bytes on 32 bit,
    and <= 128 bytes on 64 bit architectures. The memory area is owned by the
@@ -461,8 +479,8 @@
    sljit_emit_enter function emits the necessary instructions for
    setting up a new context for the executable code and moves function
    arguments to the saved registers. Furthermore the options argument
-   can be used to pass configuration options to the compiler. Currently
-   there are no options, so it must be set to 0.
+   can be used to pass configuration options to the compiler. The
+   available options are listed before sljit_emit_enter.
 
    The number of sljit_sw arguments passed to the generated function
    are specified in the "args" parameter. The number of arguments must
@@ -493,6 +511,11 @@
          overwrites the previous context.
 */
 
+/* The absolute address returned by sljit_get_local_base with
+offset 0 is aligned to sljit_d. Otherwise it is aligned to sljit_uw. */
+#define SLJIT_DOUBLE_ALIGNMENT 0x00000001
+
+/* The local_size must be >= 0 and <= SLJIT_MAX_LOCAL_SIZE. */
 #define SLJIT_MAX_LOCAL_SIZE	65536
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_enter(struct sljit_compiler *compiler,
@@ -509,7 +532,7 @@
    Note: every call of sljit_emit_enter and sljit_set_context overwrites
          the previous context. */
 
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
 	sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
 	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size);
 
@@ -674,23 +697,23 @@
 /* Flags: - (may destroy flags)
    Unsigned multiplication of SLJIT_R0 and SLJIT_R1.
    Result goes to SLJIT_R1:SLJIT_R0 (high:low) word */
-#define SLJIT_UMUL			(SLJIT_OP0_BASE + 2)
+#define SLJIT_LUMUL			(SLJIT_OP0_BASE + 2)
 /* Flags: - (may destroy flags)
    Signed multiplication of SLJIT_R0 and SLJIT_R1.
    Result goes to SLJIT_R1:SLJIT_R0 (high:low) word */
-#define SLJIT_SMUL			(SLJIT_OP0_BASE + 3)
+#define SLJIT_LSMUL			(SLJIT_OP0_BASE + 3)
 /* Flags: I - (may destroy flags)
    Unsigned divide of the value in SLJIT_R0 by the value in SLJIT_R1.
    The result is placed in SLJIT_R0 and the remainder goes to SLJIT_R1.
    Note: if SLJIT_R1 contains 0, the behaviour is undefined. */
-#define SLJIT_UDIV			(SLJIT_OP0_BASE + 4)
-#define SLJIT_IUDIV			(SLJIT_UDIV | SLJIT_INT_OP)
+#define SLJIT_LUDIV			(SLJIT_OP0_BASE + 4)
+#define SLJIT_ILUDIV			(SLJIT_LUDIV | SLJIT_INT_OP)
 /* Flags: I - (may destroy flags)
    Signed divide of the value in SLJIT_R0 by the value in SLJIT_R1.
    The result is placed in SLJIT_R0 and the remainder goes to SLJIT_R1.
    Note: if SLJIT_R1 contains 0, the behaviour is undefined. */
-#define SLJIT_SDIV			(SLJIT_OP0_BASE + 5)
-#define SLJIT_ISDIV			(SLJIT_SDIV | SLJIT_INT_OP)
+#define SLJIT_LSDIV			(SLJIT_OP0_BASE + 5)
+#define SLJIT_ILSDIV			(SLJIT_LSDIV | SLJIT_INT_OP)
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op);
 
@@ -838,7 +861,7 @@
 
 /* The following function is a helper function for sljit_emit_op_custom.
    It returns with the real machine register index of any SLJIT_FLOAT register.
-   
+
    Note: the index is always an even number on ARM (except ARM-64), MIPS, and SPARC. */
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg);
@@ -864,8 +887,8 @@
 #define SLJIT_FOP1_BASE			128
 
 /* Flags: SP - (never set any flags) */
-#define SLJIT_MOVD			(SLJIT_FOP1_BASE + 0)
-#define SLJIT_MOVS			(SLJIT_MOVD | SLJIT_SINGLE_OP)
+#define SLJIT_DMOV			(SLJIT_FOP1_BASE + 0)
+#define SLJIT_SMOV			(SLJIT_DMOV | SLJIT_SINGLE_OP)
 /* Convert opcodes: CONV[DST_TYPE].FROM[SRC_TYPE]
    SRC/DST TYPE can be: D - double, S - single, W - signed word, I - signed int
    Rounding mode when the destination is W or I: round towards zero. */
@@ -888,14 +911,14 @@
    Note: NaN check is always performed. If SLJIT_C_FLOAT_UNORDERED flag
          is set, the comparison result is unpredictable.
    Flags: SP | E | S (see SLJIT_C_FLOAT_*) */
-#define SLJIT_CMPD			(SLJIT_FOP1_BASE + 6)
-#define SLJIT_CMPS			(SLJIT_CMPD | SLJIT_SINGLE_OP)
+#define SLJIT_DCMP			(SLJIT_FOP1_BASE + 6)
+#define SLJIT_SCMP			(SLJIT_DCMP | SLJIT_SINGLE_OP)
 /* Flags: SP - (never set any flags) */
-#define SLJIT_NEGD			(SLJIT_FOP1_BASE + 7)
-#define SLJIT_NEGS			(SLJIT_NEGD | SLJIT_SINGLE_OP)
+#define SLJIT_DNEG			(SLJIT_FOP1_BASE + 7)
+#define SLJIT_SNEG			(SLJIT_DNEG | SLJIT_SINGLE_OP)
 /* Flags: SP - (never set any flags) */
-#define SLJIT_ABSD			(SLJIT_FOP1_BASE + 8)
-#define SLJIT_ABSS			(SLJIT_ABSD | SLJIT_SINGLE_OP)
+#define SLJIT_DABS			(SLJIT_FOP1_BASE + 8)
+#define SLJIT_SABS			(SLJIT_DABS | SLJIT_SINGLE_OP)
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compiler, sljit_si op,
 	sljit_si dst, sljit_sw dstw,
@@ -905,17 +928,17 @@
 #define SLJIT_FOP2_BASE			160
 
 /* Flags: SP - (never set any flags) */
-#define SLJIT_ADDD			(SLJIT_FOP2_BASE + 0)
-#define SLJIT_ADDS			(SLJIT_ADDD | SLJIT_SINGLE_OP)
+#define SLJIT_DADD			(SLJIT_FOP2_BASE + 0)
+#define SLJIT_SADD			(SLJIT_DADD | SLJIT_SINGLE_OP)
 /* Flags: SP - (never set any flags) */
-#define SLJIT_SUBD			(SLJIT_FOP2_BASE + 1)
-#define SLJIT_SUBS			(SLJIT_SUBD | SLJIT_SINGLE_OP)
+#define SLJIT_DSUB			(SLJIT_FOP2_BASE + 1)
+#define SLJIT_SSUB			(SLJIT_DSUB | SLJIT_SINGLE_OP)
 /* Flags: SP - (never set any flags) */
-#define SLJIT_MULD			(SLJIT_FOP2_BASE + 2)
-#define SLJIT_MULS			(SLJIT_MULD | SLJIT_SINGLE_OP)
+#define SLJIT_DMUL			(SLJIT_FOP2_BASE + 2)
+#define SLJIT_SMUL			(SLJIT_DMUL | SLJIT_SINGLE_OP)
 /* Flags: SP - (never set any flags) */
-#define SLJIT_DIVD			(SLJIT_FOP2_BASE + 3)
-#define SLJIT_DIVS			(SLJIT_DIVD | SLJIT_SINGLE_OP)
+#define SLJIT_DDIV			(SLJIT_FOP2_BASE + 3)
+#define SLJIT_SDIV			(SLJIT_DDIV | SLJIT_SINGLE_OP)
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compiler, sljit_si op,
 	sljit_si dst, sljit_sw dstw,
@@ -926,36 +949,64 @@
 
 SLJIT_API_FUNC_ATTRIBUTE struct sljit_label* sljit_emit_label(struct sljit_compiler *compiler);
 
-/* Invert conditional instruction: xor (^) with 0x1 */
-#define SLJIT_C_EQUAL			0
-#define SLJIT_C_ZERO			0
-#define SLJIT_C_NOT_EQUAL		1
-#define SLJIT_C_NOT_ZERO		1
+/* Invert (negate) conditional type: xor (^) with 0x1 */
 
-#define SLJIT_C_LESS			2
-#define SLJIT_C_GREATER_EQUAL		3
-#define SLJIT_C_GREATER			4
-#define SLJIT_C_LESS_EQUAL		5
-#define SLJIT_C_SIG_LESS		6
-#define SLJIT_C_SIG_GREATER_EQUAL	7
-#define SLJIT_C_SIG_GREATER		8
-#define SLJIT_C_SIG_LESS_EQUAL		9
+/* Integer comparison types. */
+#define SLJIT_EQUAL			0
+#define SLJIT_I_EQUAL			(SLJIT_EQUAL | SLJIT_INT_OP)
+#define SLJIT_ZERO			0
+#define SLJIT_I_ZERO			(SLJIT_ZERO | SLJIT_INT_OP)
+#define SLJIT_NOT_EQUAL			1
+#define SLJIT_I_NOT_EQUAL		(SLJIT_NOT_EQUAL | SLJIT_INT_OP)
+#define SLJIT_NOT_ZERO			1
+#define SLJIT_I_NOT_ZERO		(SLJIT_NOT_ZERO | SLJIT_INT_OP)
 
-#define SLJIT_C_OVERFLOW		10
-#define SLJIT_C_NOT_OVERFLOW		11
+#define SLJIT_LESS			2
+#define SLJIT_I_LESS			(SLJIT_LESS | SLJIT_INT_OP)
+#define SLJIT_GREATER_EQUAL		3
+#define SLJIT_I_GREATER_EQUAL		(SLJIT_GREATER_EQUAL | SLJIT_INT_OP)
+#define SLJIT_GREATER			4
+#define SLJIT_I_GREATER			(SLJIT_GREATER | SLJIT_INT_OP)
+#define SLJIT_LESS_EQUAL		5
+#define SLJIT_I_LESS_EQUAL		(SLJIT_LESS_EQUAL | SLJIT_INT_OP)
+#define SLJIT_SIG_LESS			6
+#define SLJIT_I_SIG_LESS		(SLJIT_SIG_LESS | SLJIT_INT_OP)
+#define SLJIT_SIG_GREATER_EQUAL		7
+#define SLJIT_I_SIG_GREATER_EQUAL	(SLJIT_SIG_GREATER_EQUAL | SLJIT_INT_OP)
+#define SLJIT_SIG_GREATER		8
+#define SLJIT_I_SIG_GREATER		(SLJIT_SIG_GREATER | SLJIT_INT_OP)
+#define SLJIT_SIG_LESS_EQUAL		9
+#define SLJIT_I_SIG_LESS_EQUAL		(SLJIT_SIG_LESS_EQUAL | SLJIT_INT_OP)
 
-#define SLJIT_C_MUL_OVERFLOW		12
-#define SLJIT_C_MUL_NOT_OVERFLOW	13
+#define SLJIT_OVERFLOW			10
+#define SLJIT_I_OVERFLOW		(SLJIT_OVERFLOW | SLJIT_INT_OP)
+#define SLJIT_NOT_OVERFLOW		11
+#define SLJIT_I_NOT_OVERFLOW		(SLJIT_NOT_OVERFLOW | SLJIT_INT_OP)
 
-#define SLJIT_C_FLOAT_EQUAL		14
-#define SLJIT_C_FLOAT_NOT_EQUAL		15
-#define SLJIT_C_FLOAT_LESS		16
-#define SLJIT_C_FLOAT_GREATER_EQUAL	17
-#define SLJIT_C_FLOAT_GREATER		18
-#define SLJIT_C_FLOAT_LESS_EQUAL	19
-#define SLJIT_C_FLOAT_UNORDERED		20
-#define SLJIT_C_FLOAT_ORDERED		21
+#define SLJIT_MUL_OVERFLOW		12
+#define SLJIT_I_MUL_OVERFLOW		(SLJIT_MUL_OVERFLOW | SLJIT_INT_OP)
+#define SLJIT_MUL_NOT_OVERFLOW		13
+#define SLJIT_I_MUL_NOT_OVERFLOW	(SLJIT_MUL_NOT_OVERFLOW | SLJIT_INT_OP)
 
+/* Floating point comparison types. */
+#define SLJIT_D_EQUAL			14
+#define SLJIT_S_EQUAL			(SLJIT_D_EQUAL | SLJIT_SINGLE_OP)
+#define SLJIT_D_NOT_EQUAL		15
+#define SLJIT_S_NOT_EQUAL		(SLJIT_D_NOT_EQUAL | SLJIT_SINGLE_OP)
+#define SLJIT_D_LESS			16
+#define SLJIT_S_LESS			(SLJIT_D_LESS | SLJIT_SINGLE_OP)
+#define SLJIT_D_GREATER_EQUAL		17
+#define SLJIT_S_GREATER_EQUAL		(SLJIT_D_GREATER_EQUAL | SLJIT_SINGLE_OP)
+#define SLJIT_D_GREATER			18
+#define SLJIT_S_GREATER			(SLJIT_D_GREATER | SLJIT_SINGLE_OP)
+#define SLJIT_D_LESS_EQUAL		19
+#define SLJIT_S_LESS_EQUAL		(SLJIT_D_LESS_EQUAL | SLJIT_SINGLE_OP)
+#define SLJIT_D_UNORDERED		20
+#define SLJIT_S_UNORDERED		(SLJIT_D_UNORDERED | SLJIT_SINGLE_OP)
+#define SLJIT_D_ORDERED			21
+#define SLJIT_S_ORDERED			(SLJIT_D_ORDERED | SLJIT_SINGLE_OP)
+
+/* Unconditional jump types. */
 #define SLJIT_JUMP			22
 #define SLJIT_FAST_CALL			23
 #define SLJIT_CALL0			24
@@ -969,7 +1020,7 @@
 #define SLJIT_REWRITABLE_JUMP		0x1000
 
 /* Emit a jump instruction. The destination is not set, only the type of the jump.
-    type must be between SLJIT_C_EQUAL and SLJIT_CALL3
+    type must be between SLJIT_EQUAL and SLJIT_CALL3
     type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP
    Flags: - (never set any flags) for both conditional and unconditional jumps.
    Flags: destroy all flags for calls. */
@@ -978,10 +1029,10 @@
 /* Basic arithmetic comparison. In most architectures it is implemented as
    an SLJIT_SUB operation (with SLJIT_UNUSED destination and setting
    appropriate flags) followed by a sljit_emit_jump. However some
-   architectures (i.e: MIPS) may employ special optimizations here. It is
-   suggested to use this comparison form when appropriate.
-    type must be between SLJIT_C_EQUAL and SLJIT_C_SIG_LESS_EQUAL
-    type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP or SLJIT_INT_OP
+   architectures (i.e: ARM64 or MIPS) may employ special optimizations here.
+   It is suggested to use this comparison form when appropriate.
+    type must be between SLJIT_EQUAL and SLJIT_I_SIG_LESS_EQUAL
+    type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP
    Flags: destroy flags. */
 SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_cmp(struct sljit_compiler *compiler, sljit_si type,
 	sljit_si src1, sljit_sw src1w,
@@ -992,11 +1043,11 @@
    sljit_emit_jump. However some architectures (i.e: MIPS) may employ
    special optimizations here. It is suggested to use this comparison form
    when appropriate.
-    type must be between SLJIT_C_FLOAT_EQUAL and SLJIT_C_FLOAT_ORDERED
-    type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP and SLJIT_SINGLE_OP
+    type must be between SLJIT_D_EQUAL and SLJIT_S_ORDERED
+    type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP
    Flags: destroy flags.
    Note: if either operand is NaN, the behaviour is undefined for
-         type <= SLJIT_C_FLOAT_LESS_EQUAL. */
+         types up to SLJIT_S_LESS_EQUAL. */
 SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_fcmp(struct sljit_compiler *compiler, sljit_si type,
 	sljit_si src1, sljit_sw src1w,
 	sljit_si src2, sljit_sw src2w);
@@ -1015,8 +1066,8 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_ijump(struct sljit_compiler *compiler, sljit_si type, sljit_si src, sljit_sw srcw);
 
 /* Perform the operation using the conditional flags as the second argument.
-   Type must always be between SLJIT_C_EQUAL and SLJIT_C_FLOAT_ORDERED. The
-   value represented by the type is 1, if the condition represented by the type
+   Type must always be between SLJIT_EQUAL and SLJIT_S_ORDERED. The value
+   represented by the type is 1, if the condition represented by the type
    is fulfilled, and 0 otherwise.
 
    If op == SLJIT_MOV, SLJIT_MOV_SI, SLJIT_MOV_UI:
@@ -1058,7 +1109,7 @@
 /* --------------------------------------------------------------------- */
 
 #define SLJIT_MAJOR_VERSION	0
-#define SLJIT_MINOR_VERSION	92
+#define SLJIT_MINOR_VERSION	93
 
 /* Get the human readable name of the platform. Can be useful on platforms
    like ARM, where ARM and Thumb2 functions can be mixed, and
@@ -1104,10 +1155,11 @@
 };
 
 /* Returns NULL if unsuccessful.
-   Note: limit and max_limit contains the size for stack allocation
-   Note: the top field is initialized to base. */
-SLJIT_API_FUNC_ATTRIBUTE struct sljit_stack* SLJIT_CALL sljit_allocate_stack(sljit_uw limit, sljit_uw max_limit);
-SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_free_stack(struct sljit_stack* stack);
+   Note: limit and max_limit contains the size for stack allocation.
+   Note: the top field is initialized to base.
+   Note: see sljit_create_compiler for the explanation of allocator_data. */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_stack* SLJIT_CALL sljit_allocate_stack(sljit_uw limit, sljit_uw max_limit, void *allocator_data);
+SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_free_stack(struct sljit_stack *stack, void *allocator_data);
 
 /* Can be used to increase (allocate) or decrease (free) the memory area.
    Returns with a non-zero value if unsuccessful. If new_limit is greater than
@@ -1115,7 +1167,7 @@
    since the growth ratio can be added to the current limit, and sljit_stack_resize
    will do all the necessary checks. The fields of the stack are not changed if
    sljit_stack_resize fails. */
-SLJIT_API_FUNC_ATTRIBUTE sljit_sw SLJIT_CALL sljit_stack_resize(struct sljit_stack* stack, sljit_uw new_limit);
+SLJIT_API_FUNC_ATTRIBUTE sljit_sw SLJIT_CALL sljit_stack_resize(struct sljit_stack *stack, sljit_uw new_limit);
 
 #endif /* (defined SLJIT_UTIL_STACK && SLJIT_UTIL_STACK) */
 
diff --git a/dist/sljit/sljitNativeARM_32.c b/dist/sljit/sljitNativeARM_32.c
index 0998423..aca1d31 100644
--- a/dist/sljit/sljitNativeARM_32.c
+++ b/dist/sljit/sljitNativeARM_32.c
@@ -315,11 +315,13 @@
 	sljit_si value;
 };
 
-static SLJIT_INLINE sljit_si resolve_const_pool_index(struct future_patch **first_patch, sljit_uw cpool_current_index, sljit_uw *cpool_start_address, sljit_uw *buf_ptr)
+static sljit_si resolve_const_pool_index(struct sljit_compiler *compiler, struct future_patch **first_patch, sljit_uw cpool_current_index, sljit_uw *cpool_start_address, sljit_uw *buf_ptr)
 {
 	sljit_si value;
 	struct future_patch *curr_patch, *prev_patch;
 
+	SLJIT_UNUSED_ARG(compiler);
+
 	/* Using the values generated by patch_pc_relative_loads. */
 	if (!*first_patch)
 		value = (sljit_si)cpool_start_address[cpool_current_index];
@@ -337,7 +339,7 @@
 					prev_patch->next = curr_patch->next;
 				else
 					*first_patch = curr_patch->next;
-				SLJIT_FREE(curr_patch);
+				SLJIT_FREE(curr_patch, compiler->allocator_data);
 				break;
 			}
 			prev_patch = curr_patch;
@@ -347,12 +349,12 @@
 
 	if (value >= 0) {
 		if ((sljit_uw)value > cpool_current_index) {
-			curr_patch = (struct future_patch*)SLJIT_MALLOC(sizeof(struct future_patch));
+			curr_patch = (struct future_patch*)SLJIT_MALLOC(sizeof(struct future_patch), compiler->allocator_data);
 			if (!curr_patch) {
 				while (*first_patch) {
 					curr_patch = *first_patch;
 					*first_patch = (*first_patch)->next;
-					SLJIT_FREE(curr_patch);
+					SLJIT_FREE(curr_patch, compiler->allocator_data);
 				}
 				return SLJIT_ERR_ALLOC_FAILED;
 			}
@@ -574,7 +576,7 @@
 	struct sljit_const *const_;
 
 	CHECK_ERROR_PTR();
-	check_sljit_generate_code(compiler);
+	CHECK_PTR(check_sljit_generate_code(compiler));
 	reverse_buf(compiler);
 
 	/* Second code generation pass. */
@@ -623,7 +625,7 @@
 					cpool_skip_alignment--;
 				}
 				else {
-					if (SLJIT_UNLIKELY(resolve_const_pool_index(&first_patch, cpool_current_index, cpool_start_address, buf_ptr))) {
+					if (SLJIT_UNLIKELY(resolve_const_pool_index(compiler, &first_patch, cpool_current_index, cpool_start_address, buf_ptr))) {
 						SLJIT_FREE_EXEC(code);
 						compiler->error = SLJIT_ERR_ALLOC_FAILED;
 						return NULL;
@@ -713,7 +715,7 @@
 		buf_end = buf_ptr + compiler->cpool_fill;
 		cpool_current_index = 0;
 		while (buf_ptr < buf_end) {
-			if (SLJIT_UNLIKELY(resolve_const_pool_index(&first_patch, cpool_current_index, cpool_start_address, buf_ptr))) {
+			if (SLJIT_UNLIKELY(resolve_const_pool_index(compiler, &first_patch, cpool_current_index, cpool_start_address, buf_ptr))) {
 				SLJIT_FREE_EXEC(code);
 				compiler->error = SLJIT_ERR_ALLOC_FAILED;
 				return NULL;
@@ -831,16 +833,8 @@
 	sljit_uw push;
 
 	CHECK_ERROR();
-	check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
+	CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
 	/* Push saved registers, temporary registers
 	   stmdb sp!, {..., lr} */
@@ -872,26 +866,19 @@
 	return SLJIT_SUCCESS;
 }
 
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
 	sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
 	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
 {
 	sljit_si size;
 
-	CHECK_ERROR_VOID();
-	check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
+	CHECK_ERROR();
+	CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
 	size = GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1);
 	compiler->local_size = ((size + local_size + 7) & ~7) - size;
+	return SLJIT_SUCCESS;
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
@@ -900,7 +887,7 @@
 	sljit_uw pop;
 
 	CHECK_ERROR();
-	check_sljit_emit_return(compiler, op, src, srcw);
+	CHECK(check_sljit_emit_return(compiler, op, src, srcw));
 
 	FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
 
@@ -1820,7 +1807,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op)
 {
 	CHECK_ERROR();
-	check_sljit_emit_op0(compiler, op);
+	CHECK(check_sljit_emit_op0(compiler, op));
 
 	op = GET_OPCODE(op);
 	switch (op) {
@@ -1830,29 +1817,29 @@
 	case SLJIT_NOP:
 		FAIL_IF(push_inst(compiler, NOP));
 		break;
-	case SLJIT_UMUL:
-	case SLJIT_SMUL:
+	case SLJIT_LUMUL:
+	case SLJIT_LSMUL:
 #if (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7)
-		return push_inst(compiler, (op == SLJIT_UMUL ? UMULL : SMULL)
+		return push_inst(compiler, (op == SLJIT_LUMUL ? UMULL : SMULL)
 			| (reg_map[SLJIT_R1] << 16)
 			| (reg_map[SLJIT_R0] << 12)
 			| (reg_map[SLJIT_R0] << 8)
 			| reg_map[SLJIT_R1]);
 #else
 		FAIL_IF(push_inst(compiler, EMIT_DATA_PROCESS_INS(MOV_DP, 0, TMP_REG1, SLJIT_UNUSED, RM(SLJIT_R1))));
-		return push_inst(compiler, (op == SLJIT_UMUL ? UMULL : SMULL)
+		return push_inst(compiler, (op == SLJIT_LUMUL ? UMULL : SMULL)
 			| (reg_map[SLJIT_R1] << 16)
 			| (reg_map[SLJIT_R0] << 12)
 			| (reg_map[SLJIT_R0] << 8)
 			| reg_map[TMP_REG1]);
 #endif
-	case SLJIT_UDIV:
-	case SLJIT_SDIV:
+	case SLJIT_LUDIV:
+	case SLJIT_LSDIV:
 		if (compiler->scratches >= 3)
 			FAIL_IF(push_inst(compiler, 0xe52d2008 /* str r2, [sp, #-8]! */));
 #if defined(__GNUC__)
 		FAIL_IF(sljit_emit_ijump(compiler, SLJIT_FAST_CALL, SLJIT_IMM,
-			(op == SLJIT_UDIV ? SLJIT_FUNC_OFFSET(__aeabi_uidivmod) : SLJIT_FUNC_OFFSET(__aeabi_idivmod))));
+			(op == SLJIT_LUDIV ? SLJIT_FUNC_OFFSET(__aeabi_uidivmod) : SLJIT_FUNC_OFFSET(__aeabi_idivmod))));
 #else
 #error "Software divmod functions are needed"
 #endif
@@ -1869,7 +1856,7 @@
 	sljit_si src, sljit_sw srcw)
 {
 	CHECK_ERROR();
-	check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+	CHECK(check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
@@ -1914,7 +1901,8 @@
 		return emit_op(compiler, op, ALLOW_ANY_IMM, dst, dstw, TMP_REG1, 0, src, srcw);
 
 	case SLJIT_NEG:
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+			|| (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 		compiler->skip_checks = 1;
 #endif
 		return sljit_emit_op2(compiler, SLJIT_SUB | GET_ALL_FLAGS(op), dst, dstw, SLJIT_IMM, 0, src, srcw);
@@ -1932,7 +1920,7 @@
 	sljit_si src2, sljit_sw src2w)
 {
 	CHECK_ERROR();
-	check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	CHECK(check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1970,13 +1958,13 @@
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg)
 {
-	check_sljit_get_register_index(reg);
+	CHECK_REG_INDEX(check_sljit_get_register_index(reg));
 	return reg_map[reg];
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg)
 {
-	check_sljit_get_float_register_index(reg);
+	CHECK_REG_INDEX(check_sljit_get_float_register_index(reg));
 	return reg << 1;
 }
 
@@ -1984,8 +1972,7 @@
 	void *instruction, sljit_si size)
 {
 	CHECK_ERROR();
-	check_sljit_emit_op_custom(compiler, instruction, size);
-	SLJIT_ASSERT(size == 4);
+	CHECK(check_sljit_emit_op_custom(compiler, instruction, size));
 
 	return push_inst(compiler, *(sljit_uw*)instruction);
 }
@@ -2188,7 +2175,7 @@
 	}
 
 	switch (GET_OPCODE(op)) {
-	case SLJIT_MOVD:
+	case SLJIT_DMOV:
 		if (src != dst_r) {
 			if (dst_r != TMP_FREG1)
 				FAIL_IF(push_inst(compiler, EMIT_FPU_OPERATION(VMOV_F32, op & SLJIT_SINGLE_OP, dst_r, src, 0)));
@@ -2196,10 +2183,10 @@
 				dst_r = src;
 		}
 		break;
-	case SLJIT_NEGD:
+	case SLJIT_DNEG:
 		FAIL_IF(push_inst(compiler, EMIT_FPU_OPERATION(VNEG_F32, op & SLJIT_SINGLE_OP, dst_r, src, 0)));
 		break;
-	case SLJIT_ABSD:
+	case SLJIT_DABS:
 		FAIL_IF(push_inst(compiler, EMIT_FPU_OPERATION(VABS_F32, op & SLJIT_SINGLE_OP, dst_r, src, 0)));
 		break;
 	case SLJIT_CONVD_FROMS:
@@ -2221,7 +2208,7 @@
 	sljit_si dst_r;
 
 	CHECK_ERROR();
-	check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	CHECK(check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -2243,19 +2230,19 @@
 	}
 
 	switch (GET_OPCODE(op)) {
-	case SLJIT_ADDD:
+	case SLJIT_DADD:
 		FAIL_IF(push_inst(compiler, EMIT_FPU_OPERATION(VADD_F32, op & SLJIT_SINGLE_OP, dst_r, src2, src1)));
 		break;
 
-	case SLJIT_SUBD:
+	case SLJIT_DSUB:
 		FAIL_IF(push_inst(compiler, EMIT_FPU_OPERATION(VSUB_F32, op & SLJIT_SINGLE_OP, dst_r, src2, src1)));
 		break;
 
-	case SLJIT_MULD:
+	case SLJIT_DMUL:
 		FAIL_IF(push_inst(compiler, EMIT_FPU_OPERATION(VMUL_F32, op & SLJIT_SINGLE_OP, dst_r, src2, src1)));
 		break;
 
-	case SLJIT_DIVD:
+	case SLJIT_DDIV:
 		FAIL_IF(push_inst(compiler, EMIT_FPU_OPERATION(VDIV_F32, op & SLJIT_SINGLE_OP, dst_r, src2, src1)));
 		break;
 	}
@@ -2277,7 +2264,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
 {
 	CHECK_ERROR();
-	check_sljit_emit_fast_enter(compiler, dst, dstw);
+	CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	/* For UNUSED dst. Uncommon, but possible. */
@@ -2300,7 +2287,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
 {
 	CHECK_ERROR();
-	check_sljit_emit_fast_return(compiler, src, srcw);
+	CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	if (FAST_IS_REG(src))
@@ -2327,53 +2314,54 @@
 static sljit_uw get_cc(sljit_si type)
 {
 	switch (type) {
-	case SLJIT_C_EQUAL:
-	case SLJIT_C_MUL_NOT_OVERFLOW:
-	case SLJIT_C_FLOAT_EQUAL:
+	case SLJIT_EQUAL:
+	case SLJIT_MUL_NOT_OVERFLOW:
+	case SLJIT_D_EQUAL:
 		return 0x00000000;
 
-	case SLJIT_C_NOT_EQUAL:
-	case SLJIT_C_MUL_OVERFLOW:
-	case SLJIT_C_FLOAT_NOT_EQUAL:
+	case SLJIT_NOT_EQUAL:
+	case SLJIT_MUL_OVERFLOW:
+	case SLJIT_D_NOT_EQUAL:
 		return 0x10000000;
 
-	case SLJIT_C_LESS:
-	case SLJIT_C_FLOAT_LESS:
+	case SLJIT_LESS:
+	case SLJIT_D_LESS:
 		return 0x30000000;
 
-	case SLJIT_C_GREATER_EQUAL:
-	case SLJIT_C_FLOAT_GREATER_EQUAL:
+	case SLJIT_GREATER_EQUAL:
+	case SLJIT_D_GREATER_EQUAL:
 		return 0x20000000;
 
-	case SLJIT_C_GREATER:
-	case SLJIT_C_FLOAT_GREATER:
+	case SLJIT_GREATER:
+	case SLJIT_D_GREATER:
 		return 0x80000000;
 
-	case SLJIT_C_LESS_EQUAL:
-	case SLJIT_C_FLOAT_LESS_EQUAL:
+	case SLJIT_LESS_EQUAL:
+	case SLJIT_D_LESS_EQUAL:
 		return 0x90000000;
 
-	case SLJIT_C_SIG_LESS:
+	case SLJIT_SIG_LESS:
 		return 0xb0000000;
 
-	case SLJIT_C_SIG_GREATER_EQUAL:
+	case SLJIT_SIG_GREATER_EQUAL:
 		return 0xa0000000;
 
-	case SLJIT_C_SIG_GREATER:
+	case SLJIT_SIG_GREATER:
 		return 0xc0000000;
 
-	case SLJIT_C_SIG_LESS_EQUAL:
+	case SLJIT_SIG_LESS_EQUAL:
 		return 0xd0000000;
 
-	case SLJIT_C_OVERFLOW:
-	case SLJIT_C_FLOAT_UNORDERED:
+	case SLJIT_OVERFLOW:
+	case SLJIT_D_UNORDERED:
 		return 0x60000000;
 
-	case SLJIT_C_NOT_OVERFLOW:
-	case SLJIT_C_FLOAT_ORDERED:
+	case SLJIT_NOT_OVERFLOW:
+	case SLJIT_D_ORDERED:
 		return 0x70000000;
 
-	default: /* SLJIT_JUMP */
+	default:
+		SLJIT_ASSERT(type >= SLJIT_JUMP && type <= SLJIT_CALL3);
 		return 0xe0000000;
 	}
 }
@@ -2383,7 +2371,7 @@
 	struct sljit_label *label;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_label(compiler);
+	CHECK_PTR(check_sljit_emit_label(compiler));
 
 	if (compiler->last_label && compiler->last_label->size == compiler->size)
 		return compiler->last_label;
@@ -2399,7 +2387,7 @@
 	struct sljit_jump *jump;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_jump(compiler, type);
+	CHECK_PTR(check_sljit_emit_jump(compiler, type));
 
 	jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
 	PTR_FAIL_IF(!jump);
@@ -2440,7 +2428,7 @@
 	struct sljit_jump *jump;
 
 	CHECK_ERROR();
-	check_sljit_emit_ijump(compiler, type, src, srcw);
+	CHECK(check_sljit_emit_ijump(compiler, type, src, srcw));
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	/* In ARM, we don't need to touch the arguments. */
@@ -2481,7 +2469,7 @@
 	sljit_uw cc, ins;
 
 	CHECK_ERROR();
-	check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+	CHECK(check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
@@ -2489,7 +2477,7 @@
 		return SLJIT_SUCCESS;
 
 	op = GET_OPCODE(op);
-	cc = get_cc(type);
+	cc = get_cc(type & 0xff);
 	dst_r = FAST_IS_REG(dst) ? dst : TMP_REG2;
 
 	if (op < SLJIT_ADD) {
@@ -2531,7 +2519,7 @@
 	sljit_si reg;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_const(compiler, dst, dstw, init_value);
+	CHECK_PTR(check_sljit_emit_const(compiler, dst, dstw, init_value));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	const_ = (struct sljit_const*)ensure_abuf(compiler, sizeof(struct sljit_const));
diff --git a/dist/sljit/sljitNativeARM_64.c b/dist/sljit/sljitNativeARM_64.c
index fba664e..b66455f 100644
--- a/dist/sljit/sljitNativeARM_64.c
+++ b/dist/sljit/sljitNativeARM_64.c
@@ -32,20 +32,19 @@
 /* Length of an instruction word */
 typedef sljit_ui sljit_ins;
 
-#define TMP_ZERO	0
+#define TMP_ZERO	(0)
 
 #define TMP_REG1	(SLJIT_NUMBER_OF_REGISTERS + 2)
 #define TMP_REG2	(SLJIT_NUMBER_OF_REGISTERS + 3)
 #define TMP_REG3	(SLJIT_NUMBER_OF_REGISTERS + 4)
-#define TMP_REG4	(SLJIT_NUMBER_OF_REGISTERS + 5)
-#define TMP_LR		(SLJIT_NUMBER_OF_REGISTERS + 6)
-#define TMP_SP		(SLJIT_NUMBER_OF_REGISTERS + 7)
+#define TMP_LR		(SLJIT_NUMBER_OF_REGISTERS + 5)
+#define TMP_SP		(SLJIT_NUMBER_OF_REGISTERS + 6)
 
 #define TMP_FREG1	(0)
 #define TMP_FREG2	(SLJIT_NUMBER_OF_FLOAT_REGISTERS + 1)
 
 static SLJIT_CONST sljit_ub reg_map[SLJIT_NUMBER_OF_REGISTERS + 8] = {
-  31, 0, 1, 2, 3, 4, 5, 6, 7, 13, 14, 15, 16, 17, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 29, 9, 10, 11, 12, 30, 31
+  31, 0, 1, 2, 3, 4, 5, 6, 7, 12, 13, 14, 15, 16, 17, 8, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 29, 9, 10, 11, 30, 31
 };
 
 #define W_OP (1 << 31)
@@ -220,7 +219,7 @@
 	struct sljit_const *const_;
 
 	CHECK_ERROR_PTR();
-	check_sljit_generate_code(compiler);
+	CHECK_PTR(check_sljit_generate_code(compiler));
 	reverse_buf(compiler);
 
 	code = (sljit_ins*)SLJIT_MALLOC_EXEC(compiler->size * sizeof(sljit_ins));
@@ -730,12 +729,12 @@
 			return push_inst(compiler, (MADD ^ inv_bits) | RD(dst) | RN(arg1) | RM(arg2) | RT2(TMP_ZERO));
 		if (flags & INT_OP) {
 			FAIL_IF(push_inst(compiler, SMADDL | RD(dst) | RN(arg1) | RM(arg2) | (31 << 10)));
-			FAIL_IF(push_inst(compiler, ADD | RD(TMP_REG4) | RN(TMP_ZERO) | RM(dst) | (2 << 22) | (31 << 10)));
-			return push_inst(compiler, SUBS | RD(TMP_ZERO) | RN(TMP_REG4) | RM(dst) | (2 << 22) | (63 << 10));
+			FAIL_IF(push_inst(compiler, ADD | RD(TMP_LR) | RN(TMP_ZERO) | RM(dst) | (2 << 22) | (31 << 10)));
+			return push_inst(compiler, SUBS | RD(TMP_ZERO) | RN(TMP_LR) | RM(dst) | (2 << 22) | (63 << 10));
 		}
-		FAIL_IF(push_inst(compiler, SMULH | RD(TMP_REG4) | RN(arg1) | RM(arg2)));
+		FAIL_IF(push_inst(compiler, SMULH | RD(TMP_LR) | RN(arg1) | RM(arg2)));
 		FAIL_IF(push_inst(compiler, MADD | RD(dst) | RN(arg1) | RM(arg2) | RT2(TMP_ZERO)));
-		return push_inst(compiler, SUBS | RD(TMP_ZERO) | RN(TMP_REG4) | RM(dst) | (2 << 22) | (63 << 10));
+		return push_inst(compiler, SUBS | RD(TMP_ZERO) | RN(TMP_LR) | RM(dst) | (2 << 22) | (63 << 10));
 	case SLJIT_AND:
 		CHECK_FLAGS(3 << 29);
 		return push_inst(compiler, (AND ^ inv_bits) | RD(dst) | RN(arg1) | RM(arg2));
@@ -976,9 +975,9 @@
 			FAIL_IF(push_inst(compiler, ADD | RD(arg) | RN(arg) | RM(other_r) | (argw << 10)));
 			return push_inst(compiler, sljit_mem_imm[flags & 0x3] | (shift << 30) | RT(reg) | RN(arg));
 		}
-		FAIL_IF(push_inst(compiler, ADD | RD(TMP_REG4) | RN(arg) | RM(other_r) | (argw << 10)));
-		FAIL_IF(push_inst(compiler, sljit_mem_imm[flags & 0x3] | (shift << 30) | RT(reg) | RN(TMP_REG4)));
-		return push_inst(compiler, ORR | RD(arg) | RN(TMP_ZERO) | RM(TMP_REG4));
+		FAIL_IF(push_inst(compiler, ADD | RD(TMP_LR) | RN(arg) | RM(other_r) | (argw << 10)));
+		FAIL_IF(push_inst(compiler, sljit_mem_imm[flags & 0x3] | (shift << 30) | RT(reg) | RN(TMP_LR)));
+		return push_inst(compiler, ORR | RD(arg) | RN(TMP_ZERO) | RM(TMP_LR));
 	}
 
 	if (arg & OFFS_REG_MASK) {
@@ -1065,41 +1064,33 @@
 	sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
 	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
 {
-	sljit_si i, tmp, offs, prev;
+	sljit_si i, tmp, offs, prev, saved_regs_size;
 
 	CHECK_ERROR();
-	check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+	CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
-	compiler->locals_offset = GET_SAVED_REGISTERS_SIZE(scratches, saveds, 2);
-	local_size = (compiler->locals_offset + local_size + 15) & ~15;
+	saved_regs_size = GET_SAVED_REGISTERS_SIZE(scratches, saveds, 0);
+	local_size += saved_regs_size + SLJIT_LOCALS_OFFSET;
+	local_size = (local_size + 15) & ~0xf;
 	compiler->local_size = local_size;
 
-	if (local_size <= (64 << 3))
+	if (local_size <= (63 * sizeof(sljit_sw))) {
 		FAIL_IF(push_inst(compiler, STP_PRE | 29 | RT2(TMP_LR)
 			| RN(TMP_SP) | ((-(local_size >> 3) & 0x7f) << 15)));
-	else {
-		local_size -= (64 << 3);
-		if (local_size > 0xfff) {
-			FAIL_IF(push_inst(compiler, SUBI | RD(TMP_SP) | RN(TMP_SP) | ((local_size >> 12) << 10) | (1 << 22)));
-			local_size &= 0xfff;
+		FAIL_IF(push_inst(compiler, ADDI | RD(SLJIT_SP) | RN(TMP_SP) | (0 << 10)));
+		offs = (local_size - saved_regs_size) << (15 - 3);
+	} else {
+		offs = 0 << 15;
+		if (saved_regs_size & 0x8) {
+			offs = 1 << 15;
+			saved_regs_size += sizeof(sljit_sw);
 		}
-		if (local_size)
-			FAIL_IF(push_inst(compiler, SUBI | RD(TMP_SP) | RN(TMP_SP) | (local_size << 10)));
-		FAIL_IF(push_inst(compiler, STP_PRE | 29 | RT2(TMP_LR) | RN(TMP_SP) | (0x40 << 15)));
+		local_size -= saved_regs_size + SLJIT_LOCALS_OFFSET;
+		FAIL_IF(push_inst(compiler, SUBI | RD(TMP_SP) | RN(TMP_SP) | (saved_regs_size << 10)));
 	}
 
-	FAIL_IF(push_inst(compiler, ADDI | RD(SLJIT_SP) | RN(TMP_SP)));
-
 	tmp = saveds < SLJIT_NUMBER_OF_SAVED_REGISTERS ? (SLJIT_S0 + 1 - saveds) : SLJIT_FIRST_SAVED_REG;
-	offs = 2 << 15;
 	prev = -1;
 	for (i = SLJIT_S0; i >= tmp; i--) {
 		if (prev == -1) {
@@ -1124,6 +1115,19 @@
 	if (prev != -1)
 		FAIL_IF(push_inst(compiler, STRI | RT(prev) | RN(TMP_SP) | (offs >> 5)));
 
+	if (compiler->local_size > (63 * sizeof(sljit_sw))) {
+		/* The local_size is already adjusted by the saved registers. */
+		if (local_size > 0xfff) {
+			FAIL_IF(push_inst(compiler, SUBI | RD(TMP_SP) | RN(TMP_SP) | ((local_size >> 12) << 10) | (1 << 22)));
+			local_size &= 0xfff;
+		}
+		if (local_size)
+			FAIL_IF(push_inst(compiler, SUBI | RD(TMP_SP) | RN(TMP_SP) | (local_size << 10)));
+		FAIL_IF(push_inst(compiler, STP_PRE | 29 | RT2(TMP_LR)
+			| RN(TMP_SP) | ((-(16 >> 3) & 0x7f) << 15)));
+		FAIL_IF(push_inst(compiler, ADDI | RD(SLJIT_SP) | RN(TMP_SP) | (0 << 10)));
+	}
+
 	if (args >= 1)
 		FAIL_IF(push_inst(compiler, ORR | RD(SLJIT_S0) | RN(TMP_ZERO) | RM(SLJIT_R0)));
 	if (args >= 2)
@@ -1134,37 +1138,53 @@
 	return SLJIT_SUCCESS;
 }
 
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
 	sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
 	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
 {
-	CHECK_ERROR_VOID();
-	check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+	CHECK_ERROR();
+	CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
-	compiler->locals_offset = GET_SAVED_REGISTERS_SIZE(scratches, saveds, 2);
-	compiler->local_size = (compiler->locals_offset + local_size + 15) & ~15;
+	local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 0) + SLJIT_LOCALS_OFFSET;
+	local_size = (local_size + 15) & ~0xf;
+	compiler->local_size = local_size;
+	return SLJIT_SUCCESS;
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
 {
 	sljit_si local_size;
-	sljit_si i, tmp, offs, prev;
+	sljit_si i, tmp, offs, prev, saved_regs_size;
 
 	CHECK_ERROR();
-	check_sljit_emit_return(compiler, op, src, srcw);
+	CHECK(check_sljit_emit_return(compiler, op, src, srcw));
 
 	FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
 
+	local_size = compiler->local_size;
+
+	saved_regs_size = GET_SAVED_REGISTERS_SIZE(compiler->scratches, compiler->saveds, 0);
+	if (local_size <= (63 * sizeof(sljit_sw)))
+		offs = (local_size - saved_regs_size) << (15 - 3);
+	else {
+		FAIL_IF(push_inst(compiler, LDP_PST | 29 | RT2(TMP_LR)
+			| RN(TMP_SP) | (((16 >> 3) & 0x7f) << 15)));
+		offs = 0 << 15;
+		if (saved_regs_size & 0x8) {
+			offs = 1 << 15;
+			saved_regs_size += sizeof(sljit_sw);
+		}
+		local_size -= saved_regs_size + SLJIT_LOCALS_OFFSET;
+		if (local_size > 0xfff) {
+			FAIL_IF(push_inst(compiler, ADDI | RD(TMP_SP) | RN(TMP_SP) | ((local_size >> 12) << 10) | (1 << 22)));
+			local_size &= 0xfff;
+		}
+		if (local_size)
+			FAIL_IF(push_inst(compiler, ADDI | RD(TMP_SP) | RN(TMP_SP) | (local_size << 10)));
+	}
+
 	tmp = compiler->saveds < SLJIT_NUMBER_OF_SAVED_REGISTERS ? (SLJIT_S0 + 1 - compiler->saveds) : SLJIT_FIRST_SAVED_REG;
-	offs = 2 << 15;
 	prev = -1;
 	for (i = SLJIT_S0; i >= tmp; i--) {
 		if (prev == -1) {
@@ -1189,20 +1209,11 @@
 	if (prev != -1)
 		FAIL_IF(push_inst(compiler, LDRI | RT(prev) | RN(TMP_SP) | (offs >> 5)));
 
-	local_size = compiler->local_size;
-
-	if (local_size <= (62 << 3))
+	if (compiler->local_size <= (63 * sizeof(sljit_sw))) {
 		FAIL_IF(push_inst(compiler, LDP_PST | 29 | RT2(TMP_LR)
 			| RN(TMP_SP) | (((local_size >> 3) & 0x7f) << 15)));
-	else {
-		FAIL_IF(push_inst(compiler, LDP_PST | 29 | RT2(TMP_LR) | RN(TMP_SP) | (0x3e << 15)));
-		local_size -= (62 << 3);
-		if (local_size > 0xfff) {
-			FAIL_IF(push_inst(compiler, ADDI | RD(TMP_SP) | RN(TMP_SP) | ((local_size >> 12) << 10) | (1 << 22)));
-			local_size &= 0xfff;
-		}
-		if (local_size)
-			FAIL_IF(push_inst(compiler, ADDI | RD(TMP_SP) | RN(TMP_SP) | (local_size << 10)));
+	} else {
+		FAIL_IF(push_inst(compiler, ADDI | RD(TMP_SP) | RN(TMP_SP) | (saved_regs_size << 10)));
 	}
 
 	FAIL_IF(push_inst(compiler, RET | RN(TMP_LR)));
@@ -1218,7 +1229,7 @@
 	sljit_ins inv_bits = (op & SLJIT_INT_OP) ? (1 << 31) : 0;
 
 	CHECK_ERROR();
-	check_sljit_emit_op0(compiler, op);
+	CHECK(check_sljit_emit_op0(compiler, op));
 
 	op = GET_OPCODE(op);
 	switch (op) {
@@ -1226,15 +1237,15 @@
 		return push_inst(compiler, BRK);
 	case SLJIT_NOP:
 		return push_inst(compiler, NOP);
-	case SLJIT_UMUL:
-	case SLJIT_SMUL:
+	case SLJIT_LUMUL:
+	case SLJIT_LSMUL:
 		FAIL_IF(push_inst(compiler, ORR | RD(TMP_REG1) | RN(TMP_ZERO) | RM(SLJIT_R0)));
 		FAIL_IF(push_inst(compiler, MADD | RD(SLJIT_R0) | RN(SLJIT_R0) | RM(SLJIT_R1) | RT2(TMP_ZERO)));
-		return push_inst(compiler, (op == SLJIT_SMUL ? SMULH : UMULH) | RD(SLJIT_R1) | RN(TMP_REG1) | RM(SLJIT_R1));
-	case SLJIT_UDIV:
-	case SLJIT_SDIV:
+		return push_inst(compiler, (op == SLJIT_LUMUL ? UMULH : SMULH) | RD(SLJIT_R1) | RN(TMP_REG1) | RM(SLJIT_R1));
+	case SLJIT_LUDIV:
+	case SLJIT_LSDIV:
 		FAIL_IF(push_inst(compiler, (ORR ^ inv_bits) | RD(TMP_REG1) | RN(TMP_ZERO) | RM(SLJIT_R0)));
-		FAIL_IF(push_inst(compiler, ((op == SLJIT_SDIV ? SDIV : UDIV) ^ inv_bits) | RD(SLJIT_R0) | RN(SLJIT_R0) | RM(SLJIT_R1)));
+		FAIL_IF(push_inst(compiler, ((op == SLJIT_LUDIV ? UDIV : SDIV) ^ inv_bits) | RD(SLJIT_R0) | RN(SLJIT_R0) | RM(SLJIT_R1)));
 		FAIL_IF(push_inst(compiler, (MADD ^ inv_bits) | RD(SLJIT_R1) | RN(SLJIT_R0) | RM(SLJIT_R1) | RT2(TMP_ZERO)));
 		return push_inst(compiler, (SUB ^ inv_bits) | RD(SLJIT_R1) | RN(TMP_REG1) | RM(SLJIT_R1));
 	}
@@ -1250,7 +1261,7 @@
 	sljit_si op_flags = GET_ALL_FLAGS(op);
 
 	CHECK_ERROR();
-	check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+	CHECK(check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
@@ -1402,7 +1413,7 @@
 	sljit_si dst_r, flags, mem_flags;
 
 	CHECK_ERROR();
-	check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	CHECK(check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1481,13 +1492,13 @@
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg)
 {
-	check_sljit_get_register_index(reg);
+	CHECK_REG_INDEX(check_sljit_get_register_index(reg));
 	return reg_map[reg];
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg)
 {
-	check_sljit_get_float_register_index(reg);
+	CHECK_REG_INDEX(check_sljit_get_float_register_index(reg));
 	return reg;
 }
 
@@ -1495,8 +1506,7 @@
 	void *instruction, sljit_si size)
 {
 	CHECK_ERROR();
-	check_sljit_emit_op_custom(compiler, instruction, size);
-	SLJIT_ASSERT(size == 4);
+	CHECK(check_sljit_emit_op_custom(compiler, instruction, size));
 
 	return push_inst(compiler, *(sljit_ins*)instruction);
 }
@@ -1662,7 +1672,7 @@
 	}
 
 	switch (GET_OPCODE(op)) {
-	case SLJIT_MOVD:
+	case SLJIT_DMOV:
 		if (src != dst_r) {
 			if (dst_r != TMP_FREG1)
 				FAIL_IF(push_inst(compiler, (FMOV ^ inv_bits) | VD(dst_r) | VN(src)));
@@ -1670,10 +1680,10 @@
 				dst_r = src;
 		}
 		break;
-	case SLJIT_NEGD:
+	case SLJIT_DNEG:
 		FAIL_IF(push_inst(compiler, (FNEG ^ inv_bits) | VD(dst_r) | VN(src)));
 		break;
-	case SLJIT_ABSD:
+	case SLJIT_DABS:
 		FAIL_IF(push_inst(compiler, (FABS ^ inv_bits) | VD(dst_r) | VN(src)));
 		break;
 	case SLJIT_CONVD_FROMS:
@@ -1695,7 +1705,7 @@
 	sljit_ins inv_bits = (op & SLJIT_SINGLE_OP) ? (1 << 22) : 0;
 
 	CHECK_ERROR();
-	check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	CHECK(check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1714,16 +1724,16 @@
 	}
 
 	switch (GET_OPCODE(op)) {
-	case SLJIT_ADDD:
+	case SLJIT_DADD:
 		FAIL_IF(push_inst(compiler, (FADD ^ inv_bits) | VD(dst_r) | VN(src1) | VM(src2)));
 		break;
-	case SLJIT_SUBD:
+	case SLJIT_DSUB:
 		FAIL_IF(push_inst(compiler, (FSUB ^ inv_bits) | VD(dst_r) | VN(src1) | VM(src2)));
 		break;
-	case SLJIT_MULD:
+	case SLJIT_DMUL:
 		FAIL_IF(push_inst(compiler, (FMUL ^ inv_bits) | VD(dst_r) | VN(src1) | VM(src2)));
 		break;
-	case SLJIT_DIVD:
+	case SLJIT_DDIV:
 		FAIL_IF(push_inst(compiler, (FDIV ^ inv_bits) | VD(dst_r) | VN(src1) | VM(src2)));
 		break;
 	}
@@ -1740,7 +1750,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
 {
 	CHECK_ERROR();
-	check_sljit_emit_fast_enter(compiler, dst, dstw);
+	CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	/* For UNUSED dst. Uncommon, but possible. */
@@ -1757,7 +1767,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
 {
 	CHECK_ERROR();
-	check_sljit_emit_fast_return(compiler, src, srcw);
+	CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	if (FAST_IS_REG(src))
@@ -1777,50 +1787,50 @@
 static sljit_uw get_cc(sljit_si type)
 {
 	switch (type) {
-	case SLJIT_C_EQUAL:
-	case SLJIT_C_MUL_NOT_OVERFLOW:
-	case SLJIT_C_FLOAT_EQUAL:
+	case SLJIT_EQUAL:
+	case SLJIT_MUL_NOT_OVERFLOW:
+	case SLJIT_D_EQUAL:
 		return 0x1;
 
-	case SLJIT_C_NOT_EQUAL:
-	case SLJIT_C_MUL_OVERFLOW:
-	case SLJIT_C_FLOAT_NOT_EQUAL:
+	case SLJIT_NOT_EQUAL:
+	case SLJIT_MUL_OVERFLOW:
+	case SLJIT_D_NOT_EQUAL:
 		return 0x0;
 
-	case SLJIT_C_LESS:
-	case SLJIT_C_FLOAT_LESS:
+	case SLJIT_LESS:
+	case SLJIT_D_LESS:
 		return 0x2;
 
-	case SLJIT_C_GREATER_EQUAL:
-	case SLJIT_C_FLOAT_GREATER_EQUAL:
+	case SLJIT_GREATER_EQUAL:
+	case SLJIT_D_GREATER_EQUAL:
 		return 0x3;
 
-	case SLJIT_C_GREATER:
-	case SLJIT_C_FLOAT_GREATER:
+	case SLJIT_GREATER:
+	case SLJIT_D_GREATER:
 		return 0x9;
 
-	case SLJIT_C_LESS_EQUAL:
-	case SLJIT_C_FLOAT_LESS_EQUAL:
+	case SLJIT_LESS_EQUAL:
+	case SLJIT_D_LESS_EQUAL:
 		return 0x8;
 
-	case SLJIT_C_SIG_LESS:
+	case SLJIT_SIG_LESS:
 		return 0xa;
 
-	case SLJIT_C_SIG_GREATER_EQUAL:
+	case SLJIT_SIG_GREATER_EQUAL:
 		return 0xb;
 
-	case SLJIT_C_SIG_GREATER:
+	case SLJIT_SIG_GREATER:
 		return 0xd;
 
-	case SLJIT_C_SIG_LESS_EQUAL:
+	case SLJIT_SIG_LESS_EQUAL:
 		return 0xc;
 
-	case SLJIT_C_OVERFLOW:
-	case SLJIT_C_FLOAT_UNORDERED:
+	case SLJIT_OVERFLOW:
+	case SLJIT_D_UNORDERED:
 		return 0x7;
 
-	case SLJIT_C_NOT_OVERFLOW:
-	case SLJIT_C_FLOAT_ORDERED:
+	case SLJIT_NOT_OVERFLOW:
+	case SLJIT_D_ORDERED:
 		return 0x6;
 
 	default:
@@ -1834,7 +1844,7 @@
 	struct sljit_label *label;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_label(compiler);
+	CHECK_PTR(check_sljit_emit_label(compiler));
 
 	if (compiler->last_label && compiler->last_label->size == compiler->size)
 		return compiler->last_label;
@@ -1850,7 +1860,7 @@
 	struct sljit_jump *jump;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_jump(compiler, type);
+	CHECK_PTR(check_sljit_emit_jump(compiler, type));
 
 	jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
 	PTR_FAIL_IF(!jump);
@@ -1877,7 +1887,7 @@
 	struct sljit_jump *jump;
 	sljit_ins inv_bits = (type & SLJIT_INT_OP) ? (1 << 31) : 0;
 
-	SLJIT_ASSERT((type & 0xff) == SLJIT_C_EQUAL || (type & 0xff) == SLJIT_C_NOT_EQUAL);
+	SLJIT_ASSERT((type & 0xff) == SLJIT_EQUAL || (type & 0xff) == SLJIT_NOT_EQUAL);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
@@ -1895,7 +1905,7 @@
 	}
 	SLJIT_ASSERT(FAST_IS_REG(src));
 
-	if ((type & 0xff) == SLJIT_C_EQUAL)
+	if ((type & 0xff) == SLJIT_EQUAL)
 		inv_bits |= 1 << 24;
 
 	PTR_FAIL_IF(push_inst(compiler, (CBZ ^ inv_bits) | (6 << 5) | RT(src)));
@@ -1910,7 +1920,7 @@
 	struct sljit_jump *jump;
 
 	CHECK_ERROR();
-	check_sljit_emit_ijump(compiler, type, src, srcw);
+	CHECK(check_sljit_emit_ijump(compiler, type, src, srcw));
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	/* In ARM, we don't need to touch the arguments. */
@@ -1941,14 +1951,14 @@
 	sljit_ins cc;
 
 	CHECK_ERROR();
-	check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+	CHECK(check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	if (dst == SLJIT_UNUSED)
 		return SLJIT_SUCCESS;
 
-	cc = get_cc(type);
+	cc = get_cc(type & 0xff);
 	dst_r = FAST_IS_REG(dst) ? dst : TMP_REG1;
 
 	if (GET_OPCODE(op) < SLJIT_ADD) {
@@ -1988,7 +1998,7 @@
 	sljit_si dst_r;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_const(compiler, dst, dstw, init_value);
+	CHECK_PTR(check_sljit_emit_const(compiler, dst, dstw, init_value));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	const_ = (struct sljit_const*)ensure_abuf(compiler, sizeof(struct sljit_const));
diff --git a/dist/sljit/sljitNativeARM_T2_32.c b/dist/sljit/sljitNativeARM_T2_32.c
index 7ea8cd7..6e38cec 100644
--- a/dist/sljit/sljitNativeARM_T2_32.c
+++ b/dist/sljit/sljitNativeARM_T2_32.c
@@ -353,7 +353,7 @@
 	struct sljit_const *const_;
 
 	CHECK_ERROR_PTR();
-	check_sljit_generate_code(compiler);
+	CHECK_PTR(check_sljit_generate_code(compiler));
 	reverse_buf(compiler);
 
 	code = (sljit_uh*)SLJIT_MALLOC_EXEC(compiler->size * sizeof(sljit_uh));
@@ -1135,16 +1135,8 @@
 	sljit_ins push;
 
 	CHECK_ERROR();
-	check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
+	CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
 	push = (1 << 4);
 
@@ -1180,26 +1172,19 @@
 	return SLJIT_SUCCESS;
 }
 
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
 	sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
 	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
 {
 	sljit_si size;
 
-	CHECK_ERROR_VOID();
-	check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
+	CHECK_ERROR();
+	CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
 	size = GET_SAVED_REGISTERS_SIZE(scratches, saveds, 2);
 	compiler->local_size = ((size + local_size + 7) & ~7) - size;
+	return SLJIT_SUCCESS;
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
@@ -1208,7 +1193,7 @@
 	sljit_ins pop;
 
 	CHECK_ERROR();
-	check_sljit_emit_return(compiler, op, src, srcw);
+	CHECK(check_sljit_emit_return(compiler, op, src, srcw));
 
 	FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
 
@@ -1255,7 +1240,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op)
 {
 	CHECK_ERROR();
-	check_sljit_emit_op0(compiler, op);
+	CHECK(check_sljit_emit_op0(compiler, op));
 
 	op = GET_OPCODE(op);
 	switch (op) {
@@ -1263,15 +1248,15 @@
 		return push_inst16(compiler, BKPT);
 	case SLJIT_NOP:
 		return push_inst16(compiler, NOP);
-	case SLJIT_UMUL:
-	case SLJIT_SMUL:
-		return push_inst32(compiler, (op == SLJIT_UMUL ? UMULL : SMULL)
+	case SLJIT_LUMUL:
+	case SLJIT_LSMUL:
+		return push_inst32(compiler, (op == SLJIT_LUMUL ? UMULL : SMULL)
 			| (reg_map[SLJIT_R1] << 8)
 			| (reg_map[SLJIT_R0] << 12)
 			| (reg_map[SLJIT_R0] << 16)
 			| reg_map[SLJIT_R1]);
-	case SLJIT_UDIV:
-	case SLJIT_SDIV:
+	case SLJIT_LUDIV:
+	case SLJIT_LSDIV:
 		if (compiler->scratches >= 4) {
 			FAIL_IF(push_inst32(compiler, 0xf84d2d04 /* str r2, [sp, #-4]! */));
 			FAIL_IF(push_inst32(compiler, 0xf84dcd04 /* str ip, [sp, #-4]! */));
@@ -1279,7 +1264,7 @@
 			FAIL_IF(push_inst32(compiler, 0xf84d2d08 /* str r2, [sp, #-8]! */));
 #if defined(__GNUC__)
 		FAIL_IF(sljit_emit_ijump(compiler, SLJIT_FAST_CALL, SLJIT_IMM,
-			(op == SLJIT_UDIV ? SLJIT_FUNC_OFFSET(__aeabi_uidivmod) : SLJIT_FUNC_OFFSET(__aeabi_idivmod))));
+			(op == SLJIT_LUDIV ? SLJIT_FUNC_OFFSET(__aeabi_uidivmod) : SLJIT_FUNC_OFFSET(__aeabi_idivmod))));
 #else
 #error "Software divmod functions are needed"
 #endif
@@ -1302,7 +1287,7 @@
 	sljit_si op_flags = GET_ALL_FLAGS(op);
 
 	CHECK_ERROR();
-	check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+	CHECK(check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
@@ -1395,7 +1380,8 @@
 	}
 
 	if (op == SLJIT_NEG) {
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+			|| (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 		compiler->skip_checks = 1;
 #endif
 		return sljit_emit_op2(compiler, SLJIT_SUB | op_flags, dst, dstw, SLJIT_IMM, 0, src, srcw);
@@ -1434,7 +1420,7 @@
 	sljit_si dst_r, flags;
 
 	CHECK_ERROR();
-	check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	CHECK(check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1507,13 +1493,13 @@
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg)
 {
-	check_sljit_get_register_index(reg);
+	CHECK_REG_INDEX(check_sljit_get_register_index(reg));
 	return reg_map[reg];
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg)
 {
-	check_sljit_get_float_register_index(reg);
+	CHECK_REG_INDEX(check_sljit_get_float_register_index(reg));
 	return reg << 1;
 }
 
@@ -1521,8 +1507,7 @@
 	void *instruction, sljit_si size)
 {
 	CHECK_ERROR();
-	check_sljit_emit_op_custom(compiler, instruction, size);
-	SLJIT_ASSERT(size == 2 || size == 4);
+	CHECK(check_sljit_emit_op_custom(compiler, instruction, size));
 
 	if (size == 2)
 		return push_inst16(compiler, *(sljit_uh*)instruction);
@@ -1695,7 +1680,7 @@
 	}
 
 	switch (GET_OPCODE(op)) {
-	case SLJIT_MOVD:
+	case SLJIT_DMOV:
 		if (src != dst_r) {
 			if (dst_r != TMP_FREG1)
 				FAIL_IF(push_inst32(compiler, VMOV_F32 | (op & SLJIT_SINGLE_OP) | DD4(dst_r) | DM4(src)));
@@ -1703,10 +1688,10 @@
 				dst_r = src;
 		}
 		break;
-	case SLJIT_NEGD:
+	case SLJIT_DNEG:
 		FAIL_IF(push_inst32(compiler, VNEG_F32 | (op & SLJIT_SINGLE_OP) | DD4(dst_r) | DM4(src)));
 		break;
-	case SLJIT_ABSD:
+	case SLJIT_DABS:
 		FAIL_IF(push_inst32(compiler, VABS_F32 | (op & SLJIT_SINGLE_OP) | DD4(dst_r) | DM4(src)));
 		break;
 	case SLJIT_CONVD_FROMS:
@@ -1728,7 +1713,7 @@
 	sljit_si dst_r;
 
 	CHECK_ERROR();
-	check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	CHECK(check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1748,16 +1733,16 @@
 	}
 
 	switch (GET_OPCODE(op)) {
-	case SLJIT_ADDD:
+	case SLJIT_DADD:
 		FAIL_IF(push_inst32(compiler, VADD_F32 | (op & SLJIT_SINGLE_OP) | DD4(dst_r) | DN4(src1) | DM4(src2)));
 		break;
-	case SLJIT_SUBD:
+	case SLJIT_DSUB:
 		FAIL_IF(push_inst32(compiler, VSUB_F32 | (op & SLJIT_SINGLE_OP) | DD4(dst_r) | DN4(src1) | DM4(src2)));
 		break;
-	case SLJIT_MULD:
+	case SLJIT_DMUL:
 		FAIL_IF(push_inst32(compiler, VMUL_F32 | (op & SLJIT_SINGLE_OP) | DD4(dst_r) | DN4(src1) | DM4(src2)));
 		break;
-	case SLJIT_DIVD:
+	case SLJIT_DDIV:
 		FAIL_IF(push_inst32(compiler, VDIV_F32 | (op & SLJIT_SINGLE_OP) | DD4(dst_r) | DN4(src1) | DM4(src2)));
 		break;
 	}
@@ -1776,7 +1761,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
 {
 	CHECK_ERROR();
-	check_sljit_emit_fast_enter(compiler, dst, dstw);
+	CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	/* For UNUSED dst. Uncommon, but possible. */
@@ -1799,7 +1784,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
 {
 	CHECK_ERROR();
-	check_sljit_emit_fast_return(compiler, src, srcw);
+	CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	if (FAST_IS_REG(src))
@@ -1826,53 +1811,54 @@
 static sljit_uw get_cc(sljit_si type)
 {
 	switch (type) {
-	case SLJIT_C_EQUAL:
-	case SLJIT_C_MUL_NOT_OVERFLOW:
-	case SLJIT_C_FLOAT_EQUAL:
+	case SLJIT_EQUAL:
+	case SLJIT_MUL_NOT_OVERFLOW:
+	case SLJIT_D_EQUAL:
 		return 0x0;
 
-	case SLJIT_C_NOT_EQUAL:
-	case SLJIT_C_MUL_OVERFLOW:
-	case SLJIT_C_FLOAT_NOT_EQUAL:
+	case SLJIT_NOT_EQUAL:
+	case SLJIT_MUL_OVERFLOW:
+	case SLJIT_D_NOT_EQUAL:
 		return 0x1;
 
-	case SLJIT_C_LESS:
-	case SLJIT_C_FLOAT_LESS:
+	case SLJIT_LESS:
+	case SLJIT_D_LESS:
 		return 0x3;
 
-	case SLJIT_C_GREATER_EQUAL:
-	case SLJIT_C_FLOAT_GREATER_EQUAL:
+	case SLJIT_GREATER_EQUAL:
+	case SLJIT_D_GREATER_EQUAL:
 		return 0x2;
 
-	case SLJIT_C_GREATER:
-	case SLJIT_C_FLOAT_GREATER:
+	case SLJIT_GREATER:
+	case SLJIT_D_GREATER:
 		return 0x8;
 
-	case SLJIT_C_LESS_EQUAL:
-	case SLJIT_C_FLOAT_LESS_EQUAL:
+	case SLJIT_LESS_EQUAL:
+	case SLJIT_D_LESS_EQUAL:
 		return 0x9;
 
-	case SLJIT_C_SIG_LESS:
+	case SLJIT_SIG_LESS:
 		return 0xb;
 
-	case SLJIT_C_SIG_GREATER_EQUAL:
+	case SLJIT_SIG_GREATER_EQUAL:
 		return 0xa;
 
-	case SLJIT_C_SIG_GREATER:
+	case SLJIT_SIG_GREATER:
 		return 0xc;
 
-	case SLJIT_C_SIG_LESS_EQUAL:
+	case SLJIT_SIG_LESS_EQUAL:
 		return 0xd;
 
-	case SLJIT_C_OVERFLOW:
-	case SLJIT_C_FLOAT_UNORDERED:
+	case SLJIT_OVERFLOW:
+	case SLJIT_D_UNORDERED:
 		return 0x6;
 
-	case SLJIT_C_NOT_OVERFLOW:
-	case SLJIT_C_FLOAT_ORDERED:
+	case SLJIT_NOT_OVERFLOW:
+	case SLJIT_D_ORDERED:
 		return 0x7;
 
 	default: /* SLJIT_JUMP */
+		SLJIT_ASSERT_STOP();
 		return 0xe;
 	}
 }
@@ -1882,7 +1868,7 @@
 	struct sljit_label *label;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_label(compiler);
+	CHECK_PTR(check_sljit_emit_label(compiler));
 
 	if (compiler->last_label && compiler->last_label->size == compiler->size)
 		return compiler->last_label;
@@ -1899,7 +1885,7 @@
 	sljit_ins cc;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_jump(compiler, type);
+	CHECK_PTR(check_sljit_emit_jump(compiler, type));
 
 	jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
 	PTR_FAIL_IF(!jump);
@@ -1931,7 +1917,7 @@
 	struct sljit_jump *jump;
 
 	CHECK_ERROR();
-	check_sljit_emit_ijump(compiler, type, src, srcw);
+	CHECK(check_sljit_emit_ijump(compiler, type, src, srcw));
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	/* In ARM, we don't need to touch the arguments. */
@@ -1963,7 +1949,7 @@
 	sljit_ins cc, ins;
 
 	CHECK_ERROR();
-	check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+	CHECK(check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
@@ -1971,7 +1957,7 @@
 		return SLJIT_SUCCESS;
 
 	op = GET_OPCODE(op);
-	cc = get_cc(type);
+	cc = get_cc(type & 0xff);
 	dst_r = FAST_IS_REG(dst) ? dst : TMP_REG2;
 
 	if (op < SLJIT_ADD) {
@@ -2042,7 +2028,7 @@
 	sljit_si dst_r;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_const(compiler, dst, dstw, init_value);
+	CHECK_PTR(check_sljit_emit_const(compiler, dst, dstw, init_value));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	const_ = (struct sljit_const*)ensure_abuf(compiler, sizeof(struct sljit_const));
diff --git a/dist/sljit/sljitNativeMIPS_common.c b/dist/sljit/sljitNativeMIPS_common.c
index f1f9f70..3e2c9f0 100644
--- a/dist/sljit/sljitNativeMIPS_common.c
+++ b/dist/sljit/sljitNativeMIPS_common.c
@@ -371,7 +371,7 @@
 	struct sljit_const *const_;
 
 	CHECK_ERROR_PTR();
-	check_sljit_generate_code(compiler);
+	CHECK_PTR(check_sljit_generate_code(compiler));
 	reverse_buf(compiler);
 
 	code = (sljit_ins*)SLJIT_MALLOC_EXEC(compiler->size * sizeof(sljit_ins));
@@ -546,18 +546,10 @@
 	sljit_si i, tmp, offs;
 
 	CHECK_ERROR();
-	check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+	CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
-
-	local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + FIXED_LOCALS_OFFSET;
+	local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + SLJIT_LOCALS_OFFSET;
 #if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
 	local_size = (local_size + 15) & ~0xf;
 #else
@@ -602,28 +594,21 @@
 	return SLJIT_SUCCESS;
 }
 
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
 	sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
 	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
 {
-	CHECK_ERROR_VOID();
-	check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+	CHECK_ERROR();
+	CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
-
-	local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + FIXED_LOCALS_OFFSET;
+	local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + SLJIT_LOCALS_OFFSET;
 #if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
 	compiler->local_size = (local_size + 15) & ~0xf;
 #else
 	compiler->local_size = (local_size + 31) & ~0x1f;
 #endif
+	return SLJIT_SUCCESS;
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
@@ -632,7 +617,7 @@
 	sljit_ins base;
 
 	CHECK_ERROR();
-	check_sljit_emit_return(compiler, op, src, srcw);
+	CHECK(check_sljit_emit_return(compiler, op, src, srcw));
 
 	FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
 
@@ -1051,7 +1036,7 @@
 #endif
 
 	CHECK_ERROR();
-	check_sljit_emit_op0(compiler, op);
+	CHECK(check_sljit_emit_op0(compiler, op));
 
 	op = GET_OPCODE(op);
 	switch (op) {
@@ -1059,17 +1044,17 @@
 		return push_inst(compiler, BREAK, UNMOVABLE_INS);
 	case SLJIT_NOP:
 		return push_inst(compiler, NOP, UNMOVABLE_INS);
-	case SLJIT_UMUL:
-	case SLJIT_SMUL:
+	case SLJIT_LUMUL:
+	case SLJIT_LSMUL:
 #if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
-		FAIL_IF(push_inst(compiler, (op == SLJIT_UMUL ? DMULTU : DMULT) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
+		FAIL_IF(push_inst(compiler, (op == SLJIT_LUMUL ? DMULTU : DMULT) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
 #else
-		FAIL_IF(push_inst(compiler, (op == SLJIT_UMUL ? MULTU : MULT) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
+		FAIL_IF(push_inst(compiler, (op == SLJIT_LUMUL ? MULTU : MULT) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
 #endif
 		FAIL_IF(push_inst(compiler, MFLO | D(SLJIT_R0), DR(SLJIT_R0)));
 		return push_inst(compiler, MFHI | D(SLJIT_R1), DR(SLJIT_R1));
-	case SLJIT_UDIV:
-	case SLJIT_SDIV:
+	case SLJIT_LUDIV:
+	case SLJIT_LSDIV:
 #if !(defined SLJIT_MIPS_R1 && SLJIT_MIPS_R1)
 		FAIL_IF(push_inst(compiler, NOP, UNMOVABLE_INS));
 		FAIL_IF(push_inst(compiler, NOP, UNMOVABLE_INS));
@@ -1077,11 +1062,11 @@
 
 #if (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
 		if (int_op)
-			FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DIVU : DIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
+			FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DIVU : DIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
 		else
-			FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DDIVU : DDIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
+			FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DDIVU : DDIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
 #else
-		FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DIVU : DIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
+		FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DIVU : DIV) | S(SLJIT_R0) | T(SLJIT_R1), MOVABLE_INS));
 #endif
 
 		FAIL_IF(push_inst(compiler, MFLO | D(SLJIT_R0), DR(SLJIT_R0)));
@@ -1102,7 +1087,7 @@
 #endif
 
 	CHECK_ERROR();
-	check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+	CHECK(check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
@@ -1204,7 +1189,7 @@
 #endif
 
 	CHECK_ERROR();
-	check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	CHECK(check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1262,13 +1247,13 @@
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg)
 {
-	check_sljit_get_register_index(reg);
+	CHECK_REG_INDEX(check_sljit_get_register_index(reg));
 	return reg_map[reg];
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg)
 {
-	check_sljit_get_float_register_index(reg);
+	CHECK_REG_INDEX(check_sljit_get_float_register_index(reg));
 	return reg << 1;
 }
 
@@ -1276,8 +1261,7 @@
 	void *instruction, sljit_si size)
 {
 	CHECK_ERROR();
-	check_sljit_emit_op_custom(compiler, instruction, size);
-	SLJIT_ASSERT(size == 4);
+	CHECK(check_sljit_emit_op_custom(compiler, instruction, size));
 
 	return push_inst(compiler, *(sljit_ins*)instruction, UNMOVABLE_INS);
 }
@@ -1438,7 +1422,7 @@
 		src <<= 1;
 
 	switch (GET_OPCODE(op)) {
-	case SLJIT_MOVD:
+	case SLJIT_DMOV:
 		if (src != dst_r) {
 			if (dst_r != TMP_FREG1)
 				FAIL_IF(push_inst(compiler, MOV_S | FMT(op) | FS(src) | FD(dst_r), MOVABLE_INS));
@@ -1446,10 +1430,10 @@
 				dst_r = src;
 		}
 		break;
-	case SLJIT_NEGD:
+	case SLJIT_DNEG:
 		FAIL_IF(push_inst(compiler, NEG_S | FMT(op) | FS(src) | FD(dst_r), MOVABLE_INS));
 		break;
-	case SLJIT_ABSD:
+	case SLJIT_DABS:
 		FAIL_IF(push_inst(compiler, ABS_S | FMT(op) | FS(src) | FD(dst_r), MOVABLE_INS));
 		break;
 	case SLJIT_CONVD_FROMS:
@@ -1471,7 +1455,7 @@
 	sljit_si dst_r, flags = 0;
 
 	CHECK_ERROR();
-	check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	CHECK(check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1522,19 +1506,19 @@
 		src2 = TMP_FREG2;
 
 	switch (GET_OPCODE(op)) {
-	case SLJIT_ADDD:
+	case SLJIT_DADD:
 		FAIL_IF(push_inst(compiler, ADD_S | FMT(op) | FT(src2) | FS(src1) | FD(dst_r), MOVABLE_INS));
 		break;
 
-	case SLJIT_SUBD:
+	case SLJIT_DSUB:
 		FAIL_IF(push_inst(compiler, SUB_S | FMT(op) | FT(src2) | FS(src1) | FD(dst_r), MOVABLE_INS));
 		break;
 
-	case SLJIT_MULD:
+	case SLJIT_DMUL:
 		FAIL_IF(push_inst(compiler, MUL_S | FMT(op) | FT(src2) | FS(src1) | FD(dst_r), MOVABLE_INS));
 		break;
 
-	case SLJIT_DIVD:
+	case SLJIT_DDIV:
 		FAIL_IF(push_inst(compiler, DIV_S | FMT(op) | FT(src2) | FS(src1) | FD(dst_r), MOVABLE_INS));
 		break;
 	}
@@ -1552,7 +1536,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
 {
 	CHECK_ERROR();
-	check_sljit_emit_fast_enter(compiler, dst, dstw);
+	CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	/* For UNUSED dst. Uncommon, but possible. */
@@ -1569,7 +1553,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
 {
 	CHECK_ERROR();
-	check_sljit_emit_fast_return(compiler, src, srcw);
+	CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	if (FAST_IS_REG(src))
@@ -1592,7 +1576,7 @@
 	struct sljit_label *label;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_label(compiler);
+	CHECK_PTR(check_sljit_emit_label(compiler));
 
 	if (compiler->last_label && compiler->last_label->size == compiler->size)
 		return compiler->last_label;
@@ -1638,7 +1622,7 @@
 	sljit_si delay_check = UNMOVABLE_INS;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_jump(compiler, type);
+	CHECK_PTR(check_sljit_emit_jump(compiler, type));
 
 	jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
 	PTR_FAIL_IF(!jump);
@@ -1646,54 +1630,54 @@
 	type &= 0xff;
 
 	switch (type) {
-	case SLJIT_C_EQUAL:
-	case SLJIT_C_FLOAT_NOT_EQUAL:
+	case SLJIT_EQUAL:
+	case SLJIT_D_NOT_EQUAL:
 		BR_NZ(EQUAL_FLAG);
 		break;
-	case SLJIT_C_NOT_EQUAL:
-	case SLJIT_C_FLOAT_EQUAL:
+	case SLJIT_NOT_EQUAL:
+	case SLJIT_D_EQUAL:
 		BR_Z(EQUAL_FLAG);
 		break;
-	case SLJIT_C_LESS:
-	case SLJIT_C_FLOAT_LESS:
+	case SLJIT_LESS:
+	case SLJIT_D_LESS:
 		BR_Z(ULESS_FLAG);
 		break;
-	case SLJIT_C_GREATER_EQUAL:
-	case SLJIT_C_FLOAT_GREATER_EQUAL:
+	case SLJIT_GREATER_EQUAL:
+	case SLJIT_D_GREATER_EQUAL:
 		BR_NZ(ULESS_FLAG);
 		break;
-	case SLJIT_C_GREATER:
-	case SLJIT_C_FLOAT_GREATER:
+	case SLJIT_GREATER:
+	case SLJIT_D_GREATER:
 		BR_Z(UGREATER_FLAG);
 		break;
-	case SLJIT_C_LESS_EQUAL:
-	case SLJIT_C_FLOAT_LESS_EQUAL:
+	case SLJIT_LESS_EQUAL:
+	case SLJIT_D_LESS_EQUAL:
 		BR_NZ(UGREATER_FLAG);
 		break;
-	case SLJIT_C_SIG_LESS:
+	case SLJIT_SIG_LESS:
 		BR_Z(LESS_FLAG);
 		break;
-	case SLJIT_C_SIG_GREATER_EQUAL:
+	case SLJIT_SIG_GREATER_EQUAL:
 		BR_NZ(LESS_FLAG);
 		break;
-	case SLJIT_C_SIG_GREATER:
+	case SLJIT_SIG_GREATER:
 		BR_Z(GREATER_FLAG);
 		break;
-	case SLJIT_C_SIG_LESS_EQUAL:
+	case SLJIT_SIG_LESS_EQUAL:
 		BR_NZ(GREATER_FLAG);
 		break;
-	case SLJIT_C_OVERFLOW:
-	case SLJIT_C_MUL_OVERFLOW:
+	case SLJIT_OVERFLOW:
+	case SLJIT_MUL_OVERFLOW:
 		BR_Z(OVERFLOW_FLAG);
 		break;
-	case SLJIT_C_NOT_OVERFLOW:
-	case SLJIT_C_MUL_NOT_OVERFLOW:
+	case SLJIT_NOT_OVERFLOW:
+	case SLJIT_MUL_NOT_OVERFLOW:
 		BR_NZ(OVERFLOW_FLAG);
 		break;
-	case SLJIT_C_FLOAT_UNORDERED:
+	case SLJIT_D_UNORDERED:
 		BR_F();
 		break;
-	case SLJIT_C_FLOAT_ORDERED:
+	case SLJIT_D_ORDERED:
 		BR_T();
 		break;
 	default:
@@ -1755,7 +1739,7 @@
 	sljit_ins inst;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_cmp(compiler, type, src1, src1w, src2, src2w);
+	CHECK_PTR(check_sljit_emit_cmp(compiler, type, src1, src1w, src2, src2w));
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
 
@@ -1776,32 +1760,32 @@
 	set_jump(jump, compiler, type & SLJIT_REWRITABLE_JUMP);
 	type &= 0xff;
 
-	if (type <= SLJIT_C_NOT_EQUAL) {
+	if (type <= SLJIT_NOT_EQUAL) {
 		RESOLVE_IMM1();
 		RESOLVE_IMM2();
 		jump->flags |= IS_BIT26_COND;
 		if (compiler->delay_slot == MOVABLE_INS || (compiler->delay_slot != UNMOVABLE_INS && compiler->delay_slot != DR(src1) && compiler->delay_slot != DR(src2)))
 			jump->flags |= IS_MOVABLE;
-		PTR_FAIL_IF(push_inst(compiler, (type == SLJIT_C_EQUAL ? BNE : BEQ) | S(src1) | T(src2) | JUMP_LENGTH, UNMOVABLE_INS));
+		PTR_FAIL_IF(push_inst(compiler, (type == SLJIT_EQUAL ? BNE : BEQ) | S(src1) | T(src2) | JUMP_LENGTH, UNMOVABLE_INS));
 	}
-	else if (type >= SLJIT_C_SIG_LESS && (((src1 & SLJIT_IMM) && (src1w == 0)) || ((src2 & SLJIT_IMM) && (src2w == 0)))) {
+	else if (type >= SLJIT_SIG_LESS && (((src1 & SLJIT_IMM) && (src1w == 0)) || ((src2 & SLJIT_IMM) && (src2w == 0)))) {
 		inst = NOP;
 		if ((src1 & SLJIT_IMM) && (src1w == 0)) {
 			RESOLVE_IMM2();
 			switch (type) {
-			case SLJIT_C_SIG_LESS:
+			case SLJIT_SIG_LESS:
 				inst = BLEZ;
 				jump->flags |= IS_BIT26_COND;
 				break;
-			case SLJIT_C_SIG_GREATER_EQUAL:
+			case SLJIT_SIG_GREATER_EQUAL:
 				inst = BGTZ;
 				jump->flags |= IS_BIT26_COND;
 				break;
-			case SLJIT_C_SIG_GREATER:
+			case SLJIT_SIG_GREATER:
 				inst = BGEZ;
 				jump->flags |= IS_BIT16_COND;
 				break;
-			case SLJIT_C_SIG_LESS_EQUAL:
+			case SLJIT_SIG_LESS_EQUAL:
 				inst = BLTZ;
 				jump->flags |= IS_BIT16_COND;
 				break;
@@ -1811,19 +1795,19 @@
 		else {
 			RESOLVE_IMM1();
 			switch (type) {
-			case SLJIT_C_SIG_LESS:
+			case SLJIT_SIG_LESS:
 				inst = BGEZ;
 				jump->flags |= IS_BIT16_COND;
 				break;
-			case SLJIT_C_SIG_GREATER_EQUAL:
+			case SLJIT_SIG_GREATER_EQUAL:
 				inst = BLTZ;
 				jump->flags |= IS_BIT16_COND;
 				break;
-			case SLJIT_C_SIG_GREATER:
+			case SLJIT_SIG_GREATER:
 				inst = BLEZ;
 				jump->flags |= IS_BIT26_COND;
 				break;
-			case SLJIT_C_SIG_LESS_EQUAL:
+			case SLJIT_SIG_LESS_EQUAL:
 				inst = BGTZ;
 				jump->flags |= IS_BIT26_COND;
 				break;
@@ -1832,29 +1816,29 @@
 		PTR_FAIL_IF(push_inst(compiler, inst | S(src1) | JUMP_LENGTH, UNMOVABLE_INS));
 	}
 	else {
-		if (type == SLJIT_C_LESS || type == SLJIT_C_GREATER_EQUAL || type == SLJIT_C_SIG_LESS || type == SLJIT_C_SIG_GREATER_EQUAL) {
+		if (type == SLJIT_LESS || type == SLJIT_GREATER_EQUAL || type == SLJIT_SIG_LESS || type == SLJIT_SIG_GREATER_EQUAL) {
 			RESOLVE_IMM1();
 			if ((src2 & SLJIT_IMM) && src2w <= SIMM_MAX && src2w >= SIMM_MIN)
-				PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_C_LESS_EQUAL ? SLTIU : SLTI) | S(src1) | T(TMP_REG1) | IMM(src2w), DR(TMP_REG1)));
+				PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_LESS_EQUAL ? SLTIU : SLTI) | S(src1) | T(TMP_REG1) | IMM(src2w), DR(TMP_REG1)));
 			else {
 				RESOLVE_IMM2();
-				PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_C_LESS_EQUAL ? SLTU : SLT) | S(src1) | T(src2) | D(TMP_REG1), DR(TMP_REG1)));
+				PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_LESS_EQUAL ? SLTU : SLT) | S(src1) | T(src2) | D(TMP_REG1), DR(TMP_REG1)));
 			}
-			type = (type == SLJIT_C_LESS || type == SLJIT_C_SIG_LESS) ? SLJIT_C_NOT_EQUAL : SLJIT_C_EQUAL;
+			type = (type == SLJIT_LESS || type == SLJIT_SIG_LESS) ? SLJIT_NOT_EQUAL : SLJIT_EQUAL;
 		}
 		else {
 			RESOLVE_IMM2();
 			if ((src1 & SLJIT_IMM) && src1w <= SIMM_MAX && src1w >= SIMM_MIN)
-				PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_C_LESS_EQUAL ? SLTIU : SLTI) | S(src2) | T(TMP_REG1) | IMM(src1w), DR(TMP_REG1)));
+				PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_LESS_EQUAL ? SLTIU : SLTI) | S(src2) | T(TMP_REG1) | IMM(src1w), DR(TMP_REG1)));
 			else {
 				RESOLVE_IMM1();
-				PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_C_LESS_EQUAL ? SLTU : SLT) | S(src2) | T(src1) | D(TMP_REG1), DR(TMP_REG1)));
+				PTR_FAIL_IF(push_inst(compiler, (type <= SLJIT_LESS_EQUAL ? SLTU : SLT) | S(src2) | T(src1) | D(TMP_REG1), DR(TMP_REG1)));
 			}
-			type = (type == SLJIT_C_GREATER || type == SLJIT_C_SIG_GREATER) ? SLJIT_C_NOT_EQUAL : SLJIT_C_EQUAL;
+			type = (type == SLJIT_GREATER || type == SLJIT_SIG_GREATER) ? SLJIT_NOT_EQUAL : SLJIT_EQUAL;
 		}
 
 		jump->flags |= IS_BIT26_COND;
-		PTR_FAIL_IF(push_inst(compiler, (type == SLJIT_C_EQUAL ? BNE : BEQ) | S(TMP_REG1) | TA(0) | JUMP_LENGTH, UNMOVABLE_INS));
+		PTR_FAIL_IF(push_inst(compiler, (type == SLJIT_EQUAL ? BNE : BEQ) | S(TMP_REG1) | TA(0) | JUMP_LENGTH, UNMOVABLE_INS));
 	}
 
 	PTR_FAIL_IF(emit_const(compiler, TMP_REG2, 0));
@@ -1876,7 +1860,7 @@
 	sljit_si if_true;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_fcmp(compiler, type, src1, src1w, src2, src2w);
+	CHECK_PTR(check_sljit_emit_fcmp(compiler, type, src1, src1w, src2, src2w));
 
 	compiler->cache_arg = 0;
 	compiler->cache_argw = 0;
@@ -1901,36 +1885,37 @@
 	jump->flags |= IS_BIT16_COND;
 
 	switch (type & 0xff) {
-	case SLJIT_C_FLOAT_EQUAL:
+	case SLJIT_D_EQUAL:
 		inst = C_UEQ_S;
 		if_true = 1;
 		break;
-	case SLJIT_C_FLOAT_NOT_EQUAL:
+	case SLJIT_D_NOT_EQUAL:
 		inst = C_UEQ_S;
 		if_true = 0;
 		break;
-	case SLJIT_C_FLOAT_LESS:
+	case SLJIT_D_LESS:
 		inst = C_ULT_S;
 		if_true = 1;
 		break;
-	case SLJIT_C_FLOAT_GREATER_EQUAL:
+	case SLJIT_D_GREATER_EQUAL:
 		inst = C_ULT_S;
 		if_true = 0;
 		break;
-	case SLJIT_C_FLOAT_GREATER:
+	case SLJIT_D_GREATER:
 		inst = C_ULE_S;
 		if_true = 0;
 		break;
-	case SLJIT_C_FLOAT_LESS_EQUAL:
+	case SLJIT_D_LESS_EQUAL:
 		inst = C_ULE_S;
 		if_true = 1;
 		break;
-	case SLJIT_C_FLOAT_UNORDERED:
+	case SLJIT_D_UNORDERED:
 		inst = C_UN_S;
 		if_true = 1;
 		break;
-	case SLJIT_C_FLOAT_ORDERED:
 	default: /* Make compilers happy. */
+		SLJIT_ASSERT_STOP();
+	case SLJIT_D_ORDERED:
 		inst = C_UN_S;
 		if_true = 0;
 		break;
@@ -1961,7 +1946,7 @@
 	struct sljit_jump *jump = NULL;
 
 	CHECK_ERROR();
-	check_sljit_emit_ijump(compiler, type, src, srcw);
+	CHECK(check_sljit_emit_ijump(compiler, type, src, srcw));
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	if (FAST_IS_REG(src)) {
@@ -2027,7 +2012,7 @@
 #endif
 
 	CHECK_ERROR();
-	check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+	CHECK(check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	if (dst == SLJIT_UNUSED)
@@ -2049,49 +2034,49 @@
 		srcw = 0;
 	}
 
-	switch (type) {
-	case SLJIT_C_EQUAL:
-	case SLJIT_C_NOT_EQUAL:
+	switch (type & 0xff) {
+	case SLJIT_EQUAL:
+	case SLJIT_NOT_EQUAL:
 		FAIL_IF(push_inst(compiler, SLTIU | SA(EQUAL_FLAG) | TA(sugg_dst_ar) | IMM(1), sugg_dst_ar));
 		dst_ar = sugg_dst_ar;
 		break;
-	case SLJIT_C_LESS:
-	case SLJIT_C_GREATER_EQUAL:
-	case SLJIT_C_FLOAT_LESS:
-	case SLJIT_C_FLOAT_GREATER_EQUAL:
+	case SLJIT_LESS:
+	case SLJIT_GREATER_EQUAL:
+	case SLJIT_D_LESS:
+	case SLJIT_D_GREATER_EQUAL:
 		dst_ar = ULESS_FLAG;
 		break;
-	case SLJIT_C_GREATER:
-	case SLJIT_C_LESS_EQUAL:
-	case SLJIT_C_FLOAT_GREATER:
-	case SLJIT_C_FLOAT_LESS_EQUAL:
+	case SLJIT_GREATER:
+	case SLJIT_LESS_EQUAL:
+	case SLJIT_D_GREATER:
+	case SLJIT_D_LESS_EQUAL:
 		dst_ar = UGREATER_FLAG;
 		break;
-	case SLJIT_C_SIG_LESS:
-	case SLJIT_C_SIG_GREATER_EQUAL:
+	case SLJIT_SIG_LESS:
+	case SLJIT_SIG_GREATER_EQUAL:
 		dst_ar = LESS_FLAG;
 		break;
-	case SLJIT_C_SIG_GREATER:
-	case SLJIT_C_SIG_LESS_EQUAL:
+	case SLJIT_SIG_GREATER:
+	case SLJIT_SIG_LESS_EQUAL:
 		dst_ar = GREATER_FLAG;
 		break;
-	case SLJIT_C_OVERFLOW:
-	case SLJIT_C_NOT_OVERFLOW:
+	case SLJIT_OVERFLOW:
+	case SLJIT_NOT_OVERFLOW:
 		dst_ar = OVERFLOW_FLAG;
 		break;
-	case SLJIT_C_MUL_OVERFLOW:
-	case SLJIT_C_MUL_NOT_OVERFLOW:
+	case SLJIT_MUL_OVERFLOW:
+	case SLJIT_MUL_NOT_OVERFLOW:
 		FAIL_IF(push_inst(compiler, SLTIU | SA(OVERFLOW_FLAG) | TA(sugg_dst_ar) | IMM(1), sugg_dst_ar));
 		dst_ar = sugg_dst_ar;
 		type ^= 0x1; /* Flip type bit for the XORI below. */
 		break;
-	case SLJIT_C_FLOAT_EQUAL:
-	case SLJIT_C_FLOAT_NOT_EQUAL:
+	case SLJIT_D_EQUAL:
+	case SLJIT_D_NOT_EQUAL:
 		dst_ar = EQUAL_FLAG;
 		break;
 
-	case SLJIT_C_FLOAT_UNORDERED:
-	case SLJIT_C_FLOAT_ORDERED:
+	case SLJIT_D_UNORDERED:
+	case SLJIT_D_ORDERED:
 		FAIL_IF(push_inst(compiler, CFC1 | TA(sugg_dst_ar) | DA(FCSR_REG), sugg_dst_ar));
 		FAIL_IF(push_inst(compiler, SRL | TA(sugg_dst_ar) | DA(sugg_dst_ar) | SH_IMM(23), sugg_dst_ar));
 		FAIL_IF(push_inst(compiler, ANDI | SA(sugg_dst_ar) | TA(sugg_dst_ar) | IMM(1), sugg_dst_ar));
@@ -2133,7 +2118,7 @@
 	sljit_si reg;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_const(compiler, dst, dstw, init_value);
+	CHECK_PTR(check_sljit_emit_const(compiler, dst, dstw, init_value));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	const_ = (struct sljit_const*)ensure_abuf(compiler, sizeof(struct sljit_const));
diff --git a/dist/sljit/sljitNativePPC_common.c b/dist/sljit/sljitNativePPC_common.c
index 01cb771..08d5356 100644
--- a/dist/sljit/sljitNativePPC_common.c
+++ b/dist/sljit/sljitNativePPC_common.c
@@ -329,7 +329,7 @@
 	struct sljit_const *const_;
 
 	CHECK_ERROR_PTR();
-	check_sljit_generate_code(compiler);
+	CHECK_PTR(check_sljit_generate_code(compiler));
 	reverse_buf(compiler);
 
 #if (defined SLJIT_INDIRECT_CALL && SLJIT_INDIRECT_CALL)
@@ -578,16 +578,8 @@
 	sljit_si i, tmp, offs;
 
 	CHECK_ERROR();
-	check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
+	CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
 	FAIL_IF(push_inst(compiler, MFLR | D(0)));
 	offs = -(sljit_si)(sizeof(sljit_sw));
@@ -620,7 +612,7 @@
 	if (args >= 3)
 		FAIL_IF(push_inst(compiler, OR | S(SLJIT_R2) | A(SLJIT_S2) | B(SLJIT_R2)));
 
-	local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + FIXED_LOCALS_OFFSET;
+	local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + SLJIT_LOCALS_OFFSET;
 	local_size = (local_size + 15) & ~0xf;
 	compiler->local_size = local_size;
 
@@ -643,24 +635,17 @@
 	return SLJIT_SUCCESS;
 }
 
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
 	sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
 	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
 {
-	CHECK_ERROR_VOID();
-	check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+	CHECK_ERROR();
+	CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
-
-	local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + FIXED_LOCALS_OFFSET;
+	local_size += GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1) + SLJIT_LOCALS_OFFSET;
 	compiler->local_size = (local_size + 15) & ~0xf;
+	return SLJIT_SUCCESS;
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
@@ -668,7 +653,7 @@
 	sljit_si i, tmp, offs;
 
 	CHECK_ERROR();
-	check_sljit_emit_return(compiler, op, src, srcw);
+	CHECK(check_sljit_emit_return(compiler, op, src, srcw));
 
 	FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
 
@@ -1265,37 +1250,37 @@
 #endif
 
 	CHECK_ERROR();
-	check_sljit_emit_op0(compiler, op);
+	CHECK(check_sljit_emit_op0(compiler, op));
 
 	op = GET_OPCODE(op);
 	switch (op) {
 	case SLJIT_BREAKPOINT:
 	case SLJIT_NOP:
 		return push_inst(compiler, NOP);
-	case SLJIT_UMUL:
-	case SLJIT_SMUL:
+	case SLJIT_LUMUL:
+	case SLJIT_LSMUL:
 		FAIL_IF(push_inst(compiler, OR | S(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R0)));
 #if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
 		FAIL_IF(push_inst(compiler, MULLD | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
-		return push_inst(compiler, (op == SLJIT_UMUL ? MULHDU : MULHD) | D(SLJIT_R1) | A(TMP_REG1) | B(SLJIT_R1));
+		return push_inst(compiler, (op == SLJIT_LUMUL ? MULHDU : MULHD) | D(SLJIT_R1) | A(TMP_REG1) | B(SLJIT_R1));
 #else
 		FAIL_IF(push_inst(compiler, MULLW | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
-		return push_inst(compiler, (op == SLJIT_UMUL ? MULHWU : MULHW) | D(SLJIT_R1) | A(TMP_REG1) | B(SLJIT_R1));
+		return push_inst(compiler, (op == SLJIT_LUMUL ? MULHWU : MULHW) | D(SLJIT_R1) | A(TMP_REG1) | B(SLJIT_R1));
 #endif
-	case SLJIT_UDIV:
-	case SLJIT_SDIV:
+	case SLJIT_LUDIV:
+	case SLJIT_LSDIV:
 		FAIL_IF(push_inst(compiler, OR | S(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R0)));
 #if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
 		if (int_op) {
-			FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DIVWU : DIVW) | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
+			FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DIVWU : DIVW) | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
 			FAIL_IF(push_inst(compiler, MULLW | D(SLJIT_R1) | A(SLJIT_R0) | B(SLJIT_R1)));
 		} else {
-			FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DIVDU : DIVD) | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
+			FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DIVDU : DIVD) | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
 			FAIL_IF(push_inst(compiler, MULLD | D(SLJIT_R1) | A(SLJIT_R0) | B(SLJIT_R1)));
 		}
 		return push_inst(compiler, SUBF | D(SLJIT_R1) | A(SLJIT_R1) | B(TMP_REG1));
 #else
-		FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? DIVWU : DIVW) | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
+		FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? DIVWU : DIVW) | D(SLJIT_R0) | A(TMP_REG1) | B(SLJIT_R1)));
 		FAIL_IF(push_inst(compiler, MULLW | D(SLJIT_R1) | A(SLJIT_R0) | B(SLJIT_R1)));
 		return push_inst(compiler, SUBF | D(SLJIT_R1) | A(SLJIT_R1) | B(TMP_REG1));
 #endif
@@ -1315,7 +1300,7 @@
 	sljit_si op_flags = GET_ALL_FLAGS(op);
 
 	CHECK_ERROR();
-	check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+	CHECK(check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
@@ -1470,7 +1455,7 @@
 	sljit_si flags = GET_FLAGS(op) ? ALT_SET_FLAGS : 0;
 
 	CHECK_ERROR();
-	check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	CHECK(check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1672,13 +1657,13 @@
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg)
 {
-	check_sljit_get_register_index(reg);
+	CHECK_REG_INDEX(check_sljit_get_register_index(reg));
 	return reg_map[reg];
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg)
 {
-	check_sljit_get_float_register_index(reg);
+	CHECK_REG_INDEX(check_sljit_get_float_register_index(reg));
 	return reg;
 }
 
@@ -1686,8 +1671,7 @@
 	void *instruction, sljit_si size)
 {
 	CHECK_ERROR();
-	check_sljit_emit_op_custom(compiler, instruction, size);
-	SLJIT_ASSERT(size == 4);
+	CHECK(check_sljit_emit_op_custom(compiler, instruction, size));
 
 	return push_inst(compiler, *(sljit_ins*)instruction);
 }
@@ -1918,7 +1902,7 @@
 			break;
 		}
 		/* Fall through. */
-	case SLJIT_MOVD:
+	case SLJIT_DMOV:
 		if (src != dst_r) {
 			if (dst_r != TMP_FREG1)
 				FAIL_IF(push_inst(compiler, FMR | FD(dst_r) | FB(src)));
@@ -1926,10 +1910,10 @@
 				dst_r = src;
 		}
 		break;
-	case SLJIT_NEGD:
+	case SLJIT_DNEG:
 		FAIL_IF(push_inst(compiler, FNEG | FD(dst_r) | FB(src)));
 		break;
-	case SLJIT_ABSD:
+	case SLJIT_DABS:
 		FAIL_IF(push_inst(compiler, FABS | FD(dst_r) | FB(src)));
 		break;
 	}
@@ -1947,7 +1931,7 @@
 	sljit_si dst_r, flags = 0;
 
 	CHECK_ERROR();
-	check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	CHECK(check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1994,19 +1978,19 @@
 		src2 = TMP_FREG2;
 
 	switch (GET_OPCODE(op)) {
-	case SLJIT_ADDD:
+	case SLJIT_DADD:
 		FAIL_IF(push_inst(compiler, SELECT_FOP(op, FADDS, FADD) | FD(dst_r) | FA(src1) | FB(src2)));
 		break;
 
-	case SLJIT_SUBD:
+	case SLJIT_DSUB:
 		FAIL_IF(push_inst(compiler, SELECT_FOP(op, FSUBS, FSUB) | FD(dst_r) | FA(src1) | FB(src2)));
 		break;
 
-	case SLJIT_MULD:
+	case SLJIT_DMUL:
 		FAIL_IF(push_inst(compiler, SELECT_FOP(op, FMULS, FMUL) | FD(dst_r) | FA(src1) | FC(src2) /* FMUL use FC as src2 */));
 		break;
 
-	case SLJIT_DIVD:
+	case SLJIT_DDIV:
 		FAIL_IF(push_inst(compiler, SELECT_FOP(op, FDIVS, FDIV) | FD(dst_r) | FA(src1) | FB(src2)));
 		break;
 	}
@@ -2027,7 +2011,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
 {
 	CHECK_ERROR();
-	check_sljit_emit_fast_enter(compiler, dst, dstw);
+	CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	/* For UNUSED dst. Uncommon, but possible. */
@@ -2045,7 +2029,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
 {
 	CHECK_ERROR();
-	check_sljit_emit_fast_return(compiler, src, srcw);
+	CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	if (FAST_IS_REG(src))
@@ -2069,7 +2053,7 @@
 	struct sljit_label *label;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_label(compiler);
+	CHECK_PTR(check_sljit_emit_label(compiler));
 
 	if (compiler->last_label && compiler->last_label->size == compiler->size)
 		return compiler->last_label;
@@ -2083,58 +2067,58 @@
 static sljit_ins get_bo_bi_flags(sljit_si type)
 {
 	switch (type) {
-	case SLJIT_C_EQUAL:
+	case SLJIT_EQUAL:
 		return (12 << 21) | (2 << 16);
 
-	case SLJIT_C_NOT_EQUAL:
+	case SLJIT_NOT_EQUAL:
 		return (4 << 21) | (2 << 16);
 
-	case SLJIT_C_LESS:
-	case SLJIT_C_FLOAT_LESS:
+	case SLJIT_LESS:
+	case SLJIT_D_LESS:
 		return (12 << 21) | ((4 + 0) << 16);
 
-	case SLJIT_C_GREATER_EQUAL:
-	case SLJIT_C_FLOAT_GREATER_EQUAL:
+	case SLJIT_GREATER_EQUAL:
+	case SLJIT_D_GREATER_EQUAL:
 		return (4 << 21) | ((4 + 0) << 16);
 
-	case SLJIT_C_GREATER:
-	case SLJIT_C_FLOAT_GREATER:
+	case SLJIT_GREATER:
+	case SLJIT_D_GREATER:
 		return (12 << 21) | ((4 + 1) << 16);
 
-	case SLJIT_C_LESS_EQUAL:
-	case SLJIT_C_FLOAT_LESS_EQUAL:
+	case SLJIT_LESS_EQUAL:
+	case SLJIT_D_LESS_EQUAL:
 		return (4 << 21) | ((4 + 1) << 16);
 
-	case SLJIT_C_SIG_LESS:
+	case SLJIT_SIG_LESS:
 		return (12 << 21) | (0 << 16);
 
-	case SLJIT_C_SIG_GREATER_EQUAL:
+	case SLJIT_SIG_GREATER_EQUAL:
 		return (4 << 21) | (0 << 16);
 
-	case SLJIT_C_SIG_GREATER:
+	case SLJIT_SIG_GREATER:
 		return (12 << 21) | (1 << 16);
 
-	case SLJIT_C_SIG_LESS_EQUAL:
+	case SLJIT_SIG_LESS_EQUAL:
 		return (4 << 21) | (1 << 16);
 
-	case SLJIT_C_OVERFLOW:
-	case SLJIT_C_MUL_OVERFLOW:
+	case SLJIT_OVERFLOW:
+	case SLJIT_MUL_OVERFLOW:
 		return (12 << 21) | (3 << 16);
 
-	case SLJIT_C_NOT_OVERFLOW:
-	case SLJIT_C_MUL_NOT_OVERFLOW:
+	case SLJIT_NOT_OVERFLOW:
+	case SLJIT_MUL_NOT_OVERFLOW:
 		return (4 << 21) | (3 << 16);
 
-	case SLJIT_C_FLOAT_EQUAL:
+	case SLJIT_D_EQUAL:
 		return (12 << 21) | ((4 + 2) << 16);
 
-	case SLJIT_C_FLOAT_NOT_EQUAL:
+	case SLJIT_D_NOT_EQUAL:
 		return (4 << 21) | ((4 + 2) << 16);
 
-	case SLJIT_C_FLOAT_UNORDERED:
+	case SLJIT_D_UNORDERED:
 		return (12 << 21) | ((4 + 3) << 16);
 
-	case SLJIT_C_FLOAT_ORDERED:
+	case SLJIT_D_ORDERED:
 		return (4 << 21) | ((4 + 3) << 16);
 
 	default:
@@ -2149,7 +2133,7 @@
 	sljit_ins bo_bi_flags;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_jump(compiler, type);
+	CHECK_PTR(check_sljit_emit_jump(compiler, type));
 
 	bo_bi_flags = get_bo_bi_flags(type & 0xff);
 	if (!bo_bi_flags)
@@ -2181,7 +2165,7 @@
 	sljit_si src_r;
 
 	CHECK_ERROR();
-	check_sljit_emit_ijump(compiler, type, src, srcw);
+	CHECK(check_sljit_emit_ijump(compiler, type, src, srcw));
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	if (FAST_IS_REG(src)) {
@@ -2236,7 +2220,7 @@
 	sljit_sw original_dstw = dstw;
 
 	CHECK_ERROR();
-	check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+	CHECK(check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	if (dst == SLJIT_UNUSED)
@@ -2259,81 +2243,81 @@
 		srcw = 0;
 	}
 
-	switch (type) {
-	case SLJIT_C_EQUAL:
+	switch (type & 0xff) {
+	case SLJIT_EQUAL:
 		GET_CR_BIT(2, reg);
 		break;
 
-	case SLJIT_C_NOT_EQUAL:
+	case SLJIT_NOT_EQUAL:
 		GET_CR_BIT(2, reg);
 		INVERT_BIT(reg);
 		break;
 
-	case SLJIT_C_LESS:
-	case SLJIT_C_FLOAT_LESS:
+	case SLJIT_LESS:
+	case SLJIT_D_LESS:
 		GET_CR_BIT(4 + 0, reg);
 		break;
 
-	case SLJIT_C_GREATER_EQUAL:
-	case SLJIT_C_FLOAT_GREATER_EQUAL:
+	case SLJIT_GREATER_EQUAL:
+	case SLJIT_D_GREATER_EQUAL:
 		GET_CR_BIT(4 + 0, reg);
 		INVERT_BIT(reg);
 		break;
 
-	case SLJIT_C_GREATER:
-	case SLJIT_C_FLOAT_GREATER:
+	case SLJIT_GREATER:
+	case SLJIT_D_GREATER:
 		GET_CR_BIT(4 + 1, reg);
 		break;
 
-	case SLJIT_C_LESS_EQUAL:
-	case SLJIT_C_FLOAT_LESS_EQUAL:
+	case SLJIT_LESS_EQUAL:
+	case SLJIT_D_LESS_EQUAL:
 		GET_CR_BIT(4 + 1, reg);
 		INVERT_BIT(reg);
 		break;
 
-	case SLJIT_C_SIG_LESS:
+	case SLJIT_SIG_LESS:
 		GET_CR_BIT(0, reg);
 		break;
 
-	case SLJIT_C_SIG_GREATER_EQUAL:
+	case SLJIT_SIG_GREATER_EQUAL:
 		GET_CR_BIT(0, reg);
 		INVERT_BIT(reg);
 		break;
 
-	case SLJIT_C_SIG_GREATER:
+	case SLJIT_SIG_GREATER:
 		GET_CR_BIT(1, reg);
 		break;
 
-	case SLJIT_C_SIG_LESS_EQUAL:
+	case SLJIT_SIG_LESS_EQUAL:
 		GET_CR_BIT(1, reg);
 		INVERT_BIT(reg);
 		break;
 
-	case SLJIT_C_OVERFLOW:
-	case SLJIT_C_MUL_OVERFLOW:
+	case SLJIT_OVERFLOW:
+	case SLJIT_MUL_OVERFLOW:
 		GET_CR_BIT(3, reg);
 		break;
 
-	case SLJIT_C_NOT_OVERFLOW:
-	case SLJIT_C_MUL_NOT_OVERFLOW:
+	case SLJIT_NOT_OVERFLOW:
+	case SLJIT_MUL_NOT_OVERFLOW:
 		GET_CR_BIT(3, reg);
 		INVERT_BIT(reg);
 		break;
 
-	case SLJIT_C_FLOAT_EQUAL:
+	case SLJIT_D_EQUAL:
 		GET_CR_BIT(4 + 2, reg);
 		break;
 
-	case SLJIT_C_FLOAT_NOT_EQUAL:
+	case SLJIT_D_NOT_EQUAL:
 		GET_CR_BIT(4 + 2, reg);
 		INVERT_BIT(reg);
 		break;
 
-	case SLJIT_C_FLOAT_UNORDERED:
+	case SLJIT_D_UNORDERED:
 		GET_CR_BIT(4 + 3, reg);
 		break;
 
-	case SLJIT_C_FLOAT_ORDERED:
+	case SLJIT_D_ORDERED:
 		GET_CR_BIT(4 + 3, reg);
 		INVERT_BIT(reg);
 		break;
@@ -2360,7 +2344,8 @@
 		return emit_op(compiler, op, input_flags, dst, dstw, TMP_REG1, 0, TMP_REG2, 0);
 	}
 
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+		|| (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 	compiler->skip_checks = 1;
 #endif
 	return sljit_emit_op2(compiler, op | flags, dst, original_dstw, src, srcw, TMP_REG2, 0);
@@ -2372,7 +2357,7 @@
 	sljit_si reg;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_const(compiler, dst, dstw, init_value);
+	CHECK_PTR(check_sljit_emit_const(compiler, dst, dstw, init_value));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	const_ = (struct sljit_const*)ensure_abuf(compiler, sizeof(struct sljit_const));
diff --git a/dist/sljit/sljitNativeSPARC_common.c b/dist/sljit/sljitNativeSPARC_common.c
index 8926a60..0b1927a 100644
--- a/dist/sljit/sljitNativeSPARC_common.c
+++ b/dist/sljit/sljitNativeSPARC_common.c
@@ -283,7 +283,7 @@
 	struct sljit_const *const_;
 
 	CHECK_ERROR_PTR();
-	check_sljit_generate_code(compiler);
+	CHECK_PTR(check_sljit_generate_code(compiler));
 	reverse_buf(compiler);
 
 	code = (sljit_ins*)SLJIT_MALLOC_EXEC(compiler->size * sizeof(sljit_ins));
@@ -423,18 +423,10 @@
 	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
 {
 	CHECK_ERROR();
-	check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+	CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
-
-	local_size = (local_size + FIXED_LOCALS_OFFSET + 7) & ~0x7;
+	local_size = (local_size + SLJIT_LOCALS_OFFSET + 7) & ~0x7;
 	compiler->local_size = local_size;
 
 	if (local_size <= SIMM_MAX) {
@@ -450,29 +442,22 @@
 	return SLJIT_SUCCESS;
 }
 
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
 	sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
 	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
 {
-	CHECK_ERROR_VOID();
-	check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+	CHECK_ERROR();
+	CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
-
-	compiler->local_size = (local_size + FIXED_LOCALS_OFFSET + 7) & ~0x7;
+	compiler->local_size = (local_size + SLJIT_LOCALS_OFFSET + 7) & ~0x7;
+	return SLJIT_SUCCESS;
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
 {
 	CHECK_ERROR();
-	check_sljit_emit_return(compiler, op, src, srcw);
+	CHECK(check_sljit_emit_return(compiler, op, src, srcw));
 
 	if (op != SLJIT_MOV || !FAST_IS_REG(src)) {
 		FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
@@ -776,7 +761,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op)
 {
 	CHECK_ERROR();
-	check_sljit_emit_op0(compiler, op);
+	CHECK(check_sljit_emit_op0(compiler, op));
 
 	op = GET_OPCODE(op);
 	switch (op) {
@@ -784,25 +769,25 @@
 		return push_inst(compiler, TA, UNMOVABLE_INS);
 	case SLJIT_NOP:
 		return push_inst(compiler, NOP, UNMOVABLE_INS);
-	case SLJIT_UMUL:
-	case SLJIT_SMUL:
+	case SLJIT_LUMUL:
+	case SLJIT_LSMUL:
 #if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-		FAIL_IF(push_inst(compiler, (op == SLJIT_UMUL ? UMUL : SMUL) | D(SLJIT_R0) | S1(SLJIT_R0) | S2(SLJIT_R1), DR(SLJIT_R0)));
+		FAIL_IF(push_inst(compiler, (op == SLJIT_LUMUL ? UMUL : SMUL) | D(SLJIT_R0) | S1(SLJIT_R0) | S2(SLJIT_R1), DR(SLJIT_R0)));
 		return push_inst(compiler, RDY | D(SLJIT_R1), DR(SLJIT_R1));
 #else
 #error "Implementation required"
 #endif
-	case SLJIT_UDIV:
-	case SLJIT_SDIV:
+	case SLJIT_LUDIV:
+	case SLJIT_LSDIV:
 #if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
-		if (op == SLJIT_UDIV)
+		if (op == SLJIT_LUDIV)
 			FAIL_IF(push_inst(compiler, WRY | S1(0), MOVABLE_INS));
 		else {
 			FAIL_IF(push_inst(compiler, SRA | D(TMP_REG1) | S1(SLJIT_R0) | IMM(31), DR(TMP_REG1)));
 			FAIL_IF(push_inst(compiler, WRY | S1(TMP_REG1), MOVABLE_INS));
 		}
 		FAIL_IF(push_inst(compiler, OR | D(TMP_REG2) | S1(0) | S2(SLJIT_R0), DR(TMP_REG2)));
-		FAIL_IF(push_inst(compiler, (op == SLJIT_UDIV ? UDIV : SDIV) | D(SLJIT_R0) | S1(SLJIT_R0) | S2(SLJIT_R1), DR(SLJIT_R0)));
+		FAIL_IF(push_inst(compiler, (op == SLJIT_LUDIV ? UDIV : SDIV) | D(SLJIT_R0) | S1(SLJIT_R0) | S2(SLJIT_R1), DR(SLJIT_R0)));
 		FAIL_IF(push_inst(compiler, SMUL | D(SLJIT_R1) | S1(SLJIT_R0) | S2(SLJIT_R1), DR(SLJIT_R1)));
 		FAIL_IF(push_inst(compiler, SUB | D(SLJIT_R1) | S1(TMP_REG2) | S2(SLJIT_R1), DR(SLJIT_R1)));
 		return SLJIT_SUCCESS;
@@ -821,7 +806,7 @@
 	sljit_si flags = GET_FLAGS(op) ? SET_FLAGS : 0;
 
 	CHECK_ERROR();
-	check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+	CHECK(check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
@@ -890,7 +875,7 @@
 	sljit_si flags = GET_FLAGS(op) ? SET_FLAGS : 0;
 
 	CHECK_ERROR();
-	check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	CHECK(check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -926,13 +911,13 @@
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg)
 {
-	check_sljit_get_register_index(reg);
+	CHECK_REG_INDEX(check_sljit_get_register_index(reg));
 	return reg_map[reg];
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg)
 {
-	check_sljit_get_float_register_index(reg);
+	CHECK_REG_INDEX(check_sljit_get_float_register_index(reg));
 	return reg << 1;
 }
 
@@ -940,8 +925,7 @@
 	void *instruction, sljit_si size)
 {
 	CHECK_ERROR();
-	check_sljit_emit_op_custom(compiler, instruction, size);
-	SLJIT_ASSERT(size == 4);
+	CHECK(check_sljit_emit_op_custom(compiler, instruction, size));
 
 	return push_inst(compiler, *(sljit_ins*)instruction, UNMOVABLE_INS);
 }
@@ -1066,7 +1050,7 @@
 		src <<= 1;
 
 	switch (GET_OPCODE(op)) {
-	case SLJIT_MOVD:
+	case SLJIT_DMOV:
 		if (src != dst_r) {
 			if (dst_r != TMP_FREG1) {
 				FAIL_IF(push_inst(compiler, FMOVS | DA(dst_r) | S2A(src), MOVABLE_INS));
@@ -1077,12 +1061,12 @@
 				dst_r = src;
 		}
 		break;
-	case SLJIT_NEGD:
+	case SLJIT_DNEG:
 		FAIL_IF(push_inst(compiler, FNEGS | DA(dst_r) | S2A(src), MOVABLE_INS));
 		if (dst_r != src && !(op & SLJIT_SINGLE_OP))
 			FAIL_IF(push_inst(compiler, FMOVS | DA(dst_r | 1) | S2A(src | 1), MOVABLE_INS));
 		break;
-	case SLJIT_ABSD:
+	case SLJIT_DABS:
 		FAIL_IF(push_inst(compiler, FABSS | DA(dst_r) | S2A(src), MOVABLE_INS));
 		if (dst_r != src && !(op & SLJIT_SINGLE_OP))
 			FAIL_IF(push_inst(compiler, FMOVS | DA(dst_r | 1) | S2A(src | 1), MOVABLE_INS));
@@ -1106,7 +1090,7 @@
 	sljit_si dst_r, flags = 0;
 
 	CHECK_ERROR();
-	check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	CHECK(check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -1157,19 +1141,19 @@
 		src2 = TMP_FREG2;
 
 	switch (GET_OPCODE(op)) {
-	case SLJIT_ADDD:
+	case SLJIT_DADD:
 		FAIL_IF(push_inst(compiler, SELECT_FOP(op, FADDS, FADDD) | DA(dst_r) | S1A(src1) | S2A(src2), MOVABLE_INS));
 		break;
 
-	case SLJIT_SUBD:
+	case SLJIT_DSUB:
 		FAIL_IF(push_inst(compiler, SELECT_FOP(op, FSUBS, FSUBD) | DA(dst_r) | S1A(src1) | S2A(src2), MOVABLE_INS));
 		break;
 
-	case SLJIT_MULD:
+	case SLJIT_DMUL:
 		FAIL_IF(push_inst(compiler, SELECT_FOP(op, FMULS, FMULD) | DA(dst_r) | S1A(src1) | S2A(src2), MOVABLE_INS));
 		break;
 
-	case SLJIT_DIVD:
+	case SLJIT_DDIV:
 		FAIL_IF(push_inst(compiler, SELECT_FOP(op, FDIVS, FDIVD) | DA(dst_r) | S1A(src1) | S2A(src2), MOVABLE_INS));
 		break;
 	}
@@ -1190,7 +1174,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw)
 {
 	CHECK_ERROR();
-	check_sljit_emit_fast_enter(compiler, dst, dstw);
+	CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	/* For UNUSED dst. Uncommon, but possible. */
@@ -1207,7 +1191,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw)
 {
 	CHECK_ERROR();
-	check_sljit_emit_fast_return(compiler, src, srcw);
+	CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	if (FAST_IS_REG(src))
@@ -1230,7 +1214,7 @@
 	struct sljit_label *label;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_label(compiler);
+	CHECK_PTR(check_sljit_emit_label(compiler));
 
 	if (compiler->last_label && compiler->last_label->size == compiler->size)
 		return compiler->last_label;
@@ -1245,66 +1229,50 @@
 static sljit_ins get_cc(sljit_si type)
 {
 	switch (type) {
-	case SLJIT_C_EQUAL:
-	case SLJIT_C_MUL_NOT_OVERFLOW:
+	case SLJIT_EQUAL:
+	case SLJIT_MUL_NOT_OVERFLOW:
+	case SLJIT_D_NOT_EQUAL: /* Unordered. */
 		return DA(0x1);
 
-	case SLJIT_C_NOT_EQUAL:
-	case SLJIT_C_MUL_OVERFLOW:
+	case SLJIT_NOT_EQUAL:
+	case SLJIT_MUL_OVERFLOW:
+	case SLJIT_D_EQUAL:
 		return DA(0x9);
 
-	case SLJIT_C_LESS:
+	case SLJIT_LESS:
+	case SLJIT_D_GREATER: /* Unordered. */
 		return DA(0x5);
 
-	case SLJIT_C_GREATER_EQUAL:
+	case SLJIT_GREATER_EQUAL:
+	case SLJIT_D_LESS_EQUAL:
 		return DA(0xd);
 
-	case SLJIT_C_GREATER:
+	case SLJIT_GREATER:
+	case SLJIT_D_GREATER_EQUAL: /* Unordered. */
 		return DA(0xc);
 
-	case SLJIT_C_LESS_EQUAL:
+	case SLJIT_LESS_EQUAL:
+	case SLJIT_D_LESS:
 		return DA(0x4);
 
-	case SLJIT_C_SIG_LESS:
+	case SLJIT_SIG_LESS:
 		return DA(0x3);
 
-	case SLJIT_C_SIG_GREATER_EQUAL:
+	case SLJIT_SIG_GREATER_EQUAL:
 		return DA(0xb);
 
-	case SLJIT_C_SIG_GREATER:
+	case SLJIT_SIG_GREATER:
 		return DA(0xa);
 
-	case SLJIT_C_SIG_LESS_EQUAL:
+	case SLJIT_SIG_LESS_EQUAL:
 		return DA(0x2);
 
-	case SLJIT_C_OVERFLOW:
+	case SLJIT_OVERFLOW:
+	case SLJIT_D_UNORDERED:
 		return DA(0x7);
 
-	case SLJIT_C_NOT_OVERFLOW:
-		return DA(0xf);
-
-	case SLJIT_C_FLOAT_EQUAL:
-		return DA(0x9);
-
-	case SLJIT_C_FLOAT_NOT_EQUAL: /* Unordered. */
-		return DA(0x1);
-
-	case SLJIT_C_FLOAT_LESS:
-		return DA(0x4);
-
-	case SLJIT_C_FLOAT_GREATER_EQUAL: /* Unordered. */
-		return DA(0xc);
-
-	case SLJIT_C_FLOAT_LESS_EQUAL:
-		return DA(0xd);
-
-	case SLJIT_C_FLOAT_GREATER: /* Unordered. */
-		return DA(0x5);
-
-	case SLJIT_C_FLOAT_UNORDERED:
-		return DA(0x7);
-
-	case SLJIT_C_FLOAT_ORDERED:
+	case SLJIT_NOT_OVERFLOW:
+	case SLJIT_D_ORDERED:
 		return DA(0xf);
 
 	default:
@@ -1318,14 +1286,14 @@
 	struct sljit_jump *jump;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_jump(compiler, type);
+	CHECK_PTR(check_sljit_emit_jump(compiler, type));
 
 	jump = (struct sljit_jump*)ensure_abuf(compiler, sizeof(struct sljit_jump));
 	PTR_FAIL_IF(!jump);
 	set_jump(jump, compiler, type & SLJIT_REWRITABLE_JUMP);
 	type &= 0xff;
 
-	if (type < SLJIT_C_FLOAT_EQUAL) {
+	if (type < SLJIT_D_EQUAL) {
 		jump->flags |= IS_COND;
 		if (((compiler->delay_slot & DST_INS_MASK) != UNMOVABLE_INS) && !(compiler->delay_slot & ICC_IS_SET))
 			jump->flags |= IS_MOVABLE;
@@ -1365,7 +1333,7 @@
 	sljit_si src_r;
 
 	CHECK_ERROR();
-	check_sljit_emit_ijump(compiler, type, src, srcw);
+	CHECK(check_sljit_emit_ijump(compiler, type, src, srcw));
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	if (FAST_IS_REG(src))
@@ -1402,7 +1370,7 @@
 	sljit_si reg, flags = (GET_FLAGS(op) ? SET_FLAGS : 0);
 
 	CHECK_ERROR();
-	check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+	CHECK(check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	if (dst == SLJIT_UNUSED)
@@ -1421,7 +1389,8 @@
 		srcw = 0;
 	}
 
-	if (type < SLJIT_C_FLOAT_EQUAL)
+	type &= 0xff;
+	if (type < SLJIT_D_EQUAL)
 		FAIL_IF(push_inst(compiler, BICC | get_cc(type) | 3, UNMOVABLE_INS));
 	else
 		FAIL_IF(push_inst(compiler, FBFCC | get_cc(type) | 3, UNMOVABLE_INS));
@@ -1444,7 +1413,7 @@
 	struct sljit_const *const_;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_const(compiler, dst, dstw, init_value);
+	CHECK_PTR(check_sljit_emit_const(compiler, dst, dstw, init_value));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	const_ = (struct sljit_const*)ensure_abuf(compiler, sizeof(struct sljit_const));
diff --git a/dist/sljit/sljitNativeTILEGX_64.c b/dist/sljit/sljitNativeTILEGX_64.c
index fb4cd38..1d6aa5a 100644
--- a/dist/sljit/sljitNativeTILEGX_64.c
+++ b/dist/sljit/sljitNativeTILEGX_64.c
@@ -1182,15 +1182,7 @@
 
 	CHECK_ERROR();
 	check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
+	set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
 	local_size += (saveds + 1) * sizeof(sljit_sw);
 	local_size = (local_size + 7) & ~7;
@@ -1244,15 +1236,7 @@
 {
 	CHECK_ERROR_VOID();
 	check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
+	set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
 	local_size += (saveds + 1) * sizeof(sljit_sw);
 	compiler->local_size = (local_size + 7) & ~7;
diff --git a/dist/sljit/sljitNativeX86_32.c b/dist/sljit/sljitNativeX86_32.c
index 515bf7e..d7129c8 100644
--- a/dist/sljit/sljitNativeX86_32.c
+++ b/dist/sljit/sljitNativeX86_32.c
@@ -71,18 +71,11 @@
 	sljit_ub *inst;
 
 	CHECK_ERROR();
-	check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+	CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
 	compiler->args = args;
 	compiler->flags_saved = 0;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
 
 	size = 1 + (scratches > 7 ? (scratches - 7) : 0) + (saveds <= 3 ? saveds : 3);
 #if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL)
@@ -141,14 +134,33 @@
 	}
 #endif
 
-	SLJIT_COMPILE_ASSERT(FIXED_LOCALS_OFFSET >= (2 + 4) * sizeof(sljit_uw), require_at_least_two_words);
+	SLJIT_COMPILE_ASSERT(SLJIT_LOCALS_OFFSET >= (2 + 4) * sizeof(sljit_uw), require_at_least_two_words);
 #if defined(__APPLE__)
-	/* Ignore pushed registers and FIXED_LOCALS_OFFSET when
-	computing the aligned local size. */
+	/* Ignore pushed registers and SLJIT_LOCALS_OFFSET when computing the aligned local size. */
 	saveds = (2 + (scratches > 7 ? (scratches - 7) : 0) + (saveds <= 3 ? saveds : 3)) * sizeof(sljit_uw);
-	local_size = ((FIXED_LOCALS_OFFSET + saveds + local_size + 15) & ~15) - saveds;
+	local_size = ((SLJIT_LOCALS_OFFSET + saveds + local_size + 15) & ~15) - saveds;
 #else
-	local_size = FIXED_LOCALS_OFFSET + ((local_size + sizeof(sljit_uw) - 1) & ~(sizeof(sljit_uw) - 1));
+	if (options & SLJIT_DOUBLE_ALIGNMENT) {
+		local_size = SLJIT_LOCALS_OFFSET + ((local_size + 7) & ~7);
+
+		inst = (sljit_ub*)ensure_buf(compiler, 1 + 17);
+		FAIL_IF(!inst);
+
+		INC_SIZE(17);
+		inst[0] = MOV_r_rm;
+		inst[1] = MOD_REG | (reg_map[TMP_REG1] << 3) | reg_map[SLJIT_SP];
+		inst[2] = GROUP_F7;
+		inst[3] = MOD_REG | (0 << 3) | reg_map[SLJIT_SP];
+		*(sljit_sw*)(inst + 4) = 0x4;
+		inst[8] = JNE_i8;
+		inst[9] = 6;
+		inst[10] = GROUP_BINARY_81;
+		inst[11] = MOD_REG | (5 << 3) | reg_map[SLJIT_SP];
+		*(sljit_sw*)(inst + 12) = 0x4;
+		inst[16] = PUSH_r + reg_map[TMP_REG1];
+	}
+	else
+		local_size = SLJIT_LOCALS_OFFSET + ((local_size + 3) & ~3);
 #endif
 
 	compiler->local_size = local_size;
@@ -157,10 +169,10 @@
 #if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL)
 		FAIL_IF(emit_do_imm(compiler, MOV_r_i32 + reg_map[SLJIT_R0], local_size));
 #else
-		local_size -= FIXED_LOCALS_OFFSET;
+		local_size -= SLJIT_LOCALS_OFFSET;
 		FAIL_IF(emit_do_imm(compiler, MOV_r_i32 + reg_map[SLJIT_R0], local_size));
 		FAIL_IF(emit_non_cum_binary(compiler, SUB_r_rm, SUB_rm_r, SUB, SUB_EAX_i32,
-			SLJIT_SP, 0, SLJIT_SP, 0, SLJIT_IMM, FIXED_LOCALS_OFFSET));
+			SLJIT_SP, 0, SLJIT_SP, 0, SLJIT_IMM, SLJIT_LOCALS_OFFSET));
 #endif
 		FAIL_IF(sljit_emit_ijump(compiler, SLJIT_CALL1, SLJIT_IMM, SLJIT_FUNC_OFFSET(sljit_grow_stack)));
 	}
@@ -171,29 +183,26 @@
 		SLJIT_SP, 0, SLJIT_SP, 0, SLJIT_IMM, local_size);
 }
 
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
 	sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
 	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
 {
-	CHECK_ERROR_VOID();
-	check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+	CHECK_ERROR();
+	CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
 	compiler->args = args;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
 
 #if defined(__APPLE__)
 	saveds = (2 + (scratches > 7 ? (scratches - 7) : 0) + (saveds <= 3 ? saveds : 3)) * sizeof(sljit_uw);
-	compiler->local_size = ((FIXED_LOCALS_OFFSET + saveds + local_size + 15) & ~15) - saveds;
+	compiler->local_size = ((SLJIT_LOCALS_OFFSET + saveds + local_size + 15) & ~15) - saveds;
 #else
-	compiler->local_size = FIXED_LOCALS_OFFSET + ((local_size + sizeof(sljit_uw) - 1) & ~(sizeof(sljit_uw) - 1));
+	if (options & SLJIT_DOUBLE_ALIGNMENT)
+		compiler->local_size = SLJIT_LOCALS_OFFSET + ((local_size + 7) & ~7);
+	else
+		compiler->local_size = SLJIT_LOCALS_OFFSET + ((local_size + 3) & ~3);
 #endif
+	return SLJIT_SUCCESS;
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
@@ -202,7 +211,7 @@
 	sljit_ub *inst;
 
 	CHECK_ERROR();
-	check_sljit_emit_return(compiler, op, src, srcw);
+	CHECK(check_sljit_emit_return(compiler, op, src, srcw));
 	SLJIT_ASSERT(compiler->args >= 0);
 
 	compiler->flags_saved = 0;
@@ -212,6 +221,18 @@
 	FAIL_IF(emit_cum_binary(compiler, ADD_r_rm, ADD_rm_r, ADD, ADD_EAX_i32,
 		SLJIT_SP, 0, SLJIT_SP, 0, SLJIT_IMM, compiler->local_size));
 
+#if !defined(__APPLE__)
+	if (compiler->options & SLJIT_DOUBLE_ALIGNMENT) {
+		inst = (sljit_ub*)ensure_buf(compiler, 1 + 3);
+		FAIL_IF(!inst);
+
+		INC_SIZE(3);
+		inst[0] = MOV_r_rm;
+		inst[1] = (reg_map[SLJIT_SP] << 3) | 0x4 /* SIB */;
+		inst[2] = (4 << 3) | reg_map[SLJIT_SP];
+	}
+#endif
+
 	size = 2 + (compiler->scratches > 7 ? (compiler->scratches - 7) : 0) +
 		(compiler->saveds <= 3 ? compiler->saveds : 3);
 #if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL)
@@ -460,7 +481,7 @@
 	sljit_ub *inst;
 
 	CHECK_ERROR();
-	check_sljit_emit_fast_enter(compiler, dst, dstw);
+	CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	CHECK_EXTRA_REGS(dst, dstw, (void)0);
@@ -491,7 +512,7 @@
 	sljit_ub *inst;
 
 	CHECK_ERROR();
-	check_sljit_emit_fast_return(compiler, src, srcw);
+	CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	CHECK_EXTRA_REGS(src, srcw, (void)0);
diff --git a/dist/sljit/sljitNativeX86_64.c b/dist/sljit/sljitNativeX86_64.c
index f356f1c..1790d8a 100644
--- a/dist/sljit/sljitNativeX86_64.c
+++ b/dist/sljit/sljitNativeX86_64.c
@@ -95,17 +95,10 @@
 	sljit_ub *inst;
 
 	CHECK_ERROR();
-	check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
+	CHECK(check_sljit_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_emit_enter(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
 	compiler->flags_saved = 0;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
 
 	/* Including the return address saved by the call instruction. */
 	saved_register_size = GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1);
@@ -173,7 +166,7 @@
 #endif
 	}
 
-	local_size = ((local_size + FIXED_LOCALS_OFFSET + saved_register_size + 16 - 1) & ~(16 - 1)) - saved_register_size;
+	local_size = ((local_size + SLJIT_LOCALS_OFFSET + saved_register_size + 15) & ~15) - saved_register_size;
 	compiler->local_size = local_size;
 
 #ifdef _WIN64
@@ -201,7 +194,8 @@
 		*inst++ = MOV_rm_i32;
 		*inst++ = MOD_REG | reg_lmap[SLJIT_R0];
 		*(sljit_si*)inst = local_size;
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+			|| (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 		compiler->skip_checks = 1;
 #endif
 		FAIL_IF(sljit_emit_ijump(compiler, SLJIT_CALL1, SLJIT_IMM, SLJIT_FUNC_OFFSET(sljit_grow_stack)));
@@ -243,27 +237,20 @@
 	return SLJIT_SUCCESS;
 }
 
-SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_set_context(struct sljit_compiler *compiler,
 	sljit_si options, sljit_si args, sljit_si scratches, sljit_si saveds,
 	sljit_si fscratches, sljit_si fsaveds, sljit_si local_size)
 {
 	sljit_si saved_register_size;
 
-	CHECK_ERROR_VOID();
-	check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
-
-	compiler->options = options;
-	compiler->scratches = scratches;
-	compiler->saveds = saveds;
-	compiler->fscratches = fscratches;
-	compiler->fsaveds = fsaveds;
-#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
-	compiler->logical_local_size = local_size;
-#endif
+	CHECK_ERROR();
+	CHECK(check_sljit_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size));
+	set_set_context(compiler, options, args, scratches, saveds, fscratches, fsaveds, local_size);
 
 	/* Including the return address saved by the call instruction. */
 	saved_register_size = GET_SAVED_REGISTERS_SIZE(scratches, saveds, 1);
-	compiler->local_size = ((local_size + FIXED_LOCALS_OFFSET + saved_register_size + 16 - 1) & ~(16 - 1)) - saved_register_size;
+	compiler->local_size = ((local_size + SLJIT_LOCALS_OFFSET + saved_register_size + 15) & ~15) - saved_register_size;
+	return SLJIT_SUCCESS;
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op, sljit_si src, sljit_sw srcw)
@@ -272,7 +259,7 @@
 	sljit_ub *inst;
 
 	CHECK_ERROR();
-	check_sljit_emit_return(compiler, op, src, srcw);
+	CHECK(check_sljit_emit_return(compiler, op, src, srcw));
 
 	compiler->flags_saved = 0;
 	FAIL_IF(emit_mov_before_return(compiler, op, src, srcw));
@@ -607,7 +594,7 @@
 	sljit_ub *inst;
 
 	CHECK_ERROR();
-	check_sljit_emit_fast_enter(compiler, dst, dstw);
+	CHECK(check_sljit_emit_fast_enter(compiler, dst, dstw));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	/* For UNUSED dst. Uncommon, but possible. */
@@ -644,7 +631,7 @@
 	sljit_ub *inst;
 
 	CHECK_ERROR();
-	check_sljit_emit_fast_return(compiler, src, srcw);
+	CHECK(check_sljit_emit_fast_return(compiler, src, srcw));
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	if ((src & SLJIT_IMM) && NOT_HALFWORD(srcw)) {
diff --git a/dist/sljit/sljitNativeX86_common.c b/dist/sljit/sljitNativeX86_common.c
index 71442fe..22a163f 100644
--- a/dist/sljit/sljitNativeX86_common.c
+++ b/dist/sljit/sljitNativeX86_common.c
@@ -72,7 +72,7 @@
 
 #define CHECK_EXTRA_REGS(p, w, do) \
 	if (p >= SLJIT_R3 && p <= SLJIT_R6) { \
-		w = FIXED_LOCALS_OFFSET + ((p) - (SLJIT_R3 + 4)) * sizeof(sljit_sw); \
+		w = SLJIT_LOCALS_OFFSET + ((p) - (SLJIT_R3 + 4)) * sizeof(sljit_sw); \
 		p = SLJIT_MEM1(SLJIT_SP); \
 		do; \
 	}
@@ -183,6 +183,7 @@
 #define IMUL_r_rm_i8	0x6b
 #define IMUL_r_rm_i32	0x69
 #define JE_i8		0x74
+#define JNE_i8		0x75
 #define JMP_i8		0xeb
 #define JMP_i32		0xe9
 #define JMP_rm		(/* GROUP_FF */ 4 << 3)
@@ -330,54 +331,54 @@
 static sljit_ub get_jump_code(sljit_si type)
 {
 	switch (type) {
-	case SLJIT_C_EQUAL:
-	case SLJIT_C_FLOAT_EQUAL:
+	case SLJIT_EQUAL:
+	case SLJIT_D_EQUAL:
 		return 0x84 /* je */;
 
-	case SLJIT_C_NOT_EQUAL:
-	case SLJIT_C_FLOAT_NOT_EQUAL:
+	case SLJIT_NOT_EQUAL:
+	case SLJIT_D_NOT_EQUAL:
 		return 0x85 /* jne */;
 
-	case SLJIT_C_LESS:
-	case SLJIT_C_FLOAT_LESS:
+	case SLJIT_LESS:
+	case SLJIT_D_LESS:
 		return 0x82 /* jc */;
 
-	case SLJIT_C_GREATER_EQUAL:
-	case SLJIT_C_FLOAT_GREATER_EQUAL:
+	case SLJIT_GREATER_EQUAL:
+	case SLJIT_D_GREATER_EQUAL:
 		return 0x83 /* jae */;
 
-	case SLJIT_C_GREATER:
-	case SLJIT_C_FLOAT_GREATER:
+	case SLJIT_GREATER:
+	case SLJIT_D_GREATER:
 		return 0x87 /* jnbe */;
 
-	case SLJIT_C_LESS_EQUAL:
-	case SLJIT_C_FLOAT_LESS_EQUAL:
+	case SLJIT_LESS_EQUAL:
+	case SLJIT_D_LESS_EQUAL:
 		return 0x86 /* jbe */;
 
-	case SLJIT_C_SIG_LESS:
+	case SLJIT_SIG_LESS:
 		return 0x8c /* jl */;
 
-	case SLJIT_C_SIG_GREATER_EQUAL:
+	case SLJIT_SIG_GREATER_EQUAL:
 		return 0x8d /* jnl */;
 
-	case SLJIT_C_SIG_GREATER:
+	case SLJIT_SIG_GREATER:
 		return 0x8f /* jnle */;
 
-	case SLJIT_C_SIG_LESS_EQUAL:
+	case SLJIT_SIG_LESS_EQUAL:
 		return 0x8e /* jle */;
 
-	case SLJIT_C_OVERFLOW:
-	case SLJIT_C_MUL_OVERFLOW:
+	case SLJIT_OVERFLOW:
+	case SLJIT_MUL_OVERFLOW:
 		return 0x80 /* jo */;
 
-	case SLJIT_C_NOT_OVERFLOW:
-	case SLJIT_C_MUL_NOT_OVERFLOW:
+	case SLJIT_NOT_OVERFLOW:
+	case SLJIT_MUL_NOT_OVERFLOW:
 		return 0x81 /* jno */;
 
-	case SLJIT_C_FLOAT_UNORDERED:
+	case SLJIT_D_UNORDERED:
 		return 0x8a /* jp */;
 
-	case SLJIT_C_FLOAT_ORDERED:
+	case SLJIT_D_ORDERED:
 		return 0x8b /* jpo */;
 	}
 	return 0;
@@ -456,7 +457,7 @@
 	struct sljit_const *const_;
 
 	CHECK_ERROR_PTR();
-	check_sljit_generate_code(compiler);
+	CHECK_PTR(check_sljit_generate_code(compiler));
 	reverse_buf(compiler);
 
 	/* Second code generation pass. */
@@ -724,7 +725,7 @@
 #endif
 
 	CHECK_ERROR();
-	check_sljit_emit_op0(compiler, op);
+	CHECK(check_sljit_emit_op0(compiler, op));
 
 	switch (GET_OPCODE(op)) {
 	case SLJIT_BREAKPOINT:
@@ -739,10 +740,10 @@
 		INC_SIZE(1);
 		*inst = NOP;
 		break;
-	case SLJIT_UMUL:
-	case SLJIT_SMUL:
-	case SLJIT_UDIV:
-	case SLJIT_SDIV:
+	case SLJIT_LUMUL:
+	case SLJIT_LSMUL:
+	case SLJIT_LUDIV:
+	case SLJIT_LSDIV:
 		compiler->flags_saved = 0;
 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
 #ifdef _WIN64
@@ -762,7 +763,7 @@
 #endif
 
 		op = GET_OPCODE(op);
-		if (op == SLJIT_UDIV) {
+		if (op == SLJIT_LUDIV) {
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || defined(_WIN64)
 			EMIT_MOV(compiler, TMP_REG1, 0, SLJIT_R1, 0);
 			inst = emit_x86_instruction(compiler, 1, SLJIT_R1, 0, SLJIT_R1, 0);
@@ -773,7 +774,7 @@
 			*inst = XOR_r_rm;
 		}
 
-		if (op == SLJIT_SDIV) {
+		if (op == SLJIT_LSDIV) {
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || defined(_WIN64)
 			EMIT_MOV(compiler, TMP_REG1, 0, SLJIT_R1, 0);
 #endif
@@ -804,10 +805,10 @@
 		FAIL_IF(!inst);
 		INC_SIZE(2);
 		*inst++ = GROUP_F7;
-		*inst = MOD_REG | ((op >= SLJIT_UDIV) ? reg_map[TMP_REG1] : reg_map[SLJIT_R1]);
+		*inst = MOD_REG | ((op >= SLJIT_LUDIV) ? reg_map[TMP_REG1] : reg_map[SLJIT_R1]);
 #else
 #ifdef _WIN64
-		size = (!compiler->mode32 || op >= SLJIT_UDIV) ? 3 : 2;
+		size = (!compiler->mode32 || op >= SLJIT_LUDIV) ? 3 : 2;
 #else
 		size = (!compiler->mode32) ? 3 : 2;
 #endif
@@ -816,11 +817,11 @@
 		INC_SIZE(size);
 #ifdef _WIN64
 		if (!compiler->mode32)
-			*inst++ = REX_W | ((op >= SLJIT_UDIV) ? REX_B : 0);
-		else if (op >= SLJIT_UDIV)
+			*inst++ = REX_W | ((op >= SLJIT_LUDIV) ? REX_B : 0);
+		else if (op >= SLJIT_LUDIV)
 			*inst++ = REX_B;
 		*inst++ = GROUP_F7;
-		*inst = MOD_REG | ((op >= SLJIT_UDIV) ? reg_lmap[TMP_REG1] : reg_lmap[SLJIT_R1]);
+		*inst = MOD_REG | ((op >= SLJIT_LUDIV) ? reg_lmap[TMP_REG1] : reg_lmap[SLJIT_R1]);
 #else
 		if (!compiler->mode32)
 			*inst++ = REX_W;
@@ -829,16 +830,16 @@
 #endif
 #endif
 		switch (op) {
-		case SLJIT_UMUL:
+		case SLJIT_LUMUL:
 			*inst |= MUL;
 			break;
-		case SLJIT_SMUL:
+		case SLJIT_LSMUL:
 			*inst |= IMUL;
 			break;
-		case SLJIT_UDIV:
+		case SLJIT_LUDIV:
 			*inst |= DIV;
 			break;
-		case SLJIT_SDIV:
+		case SLJIT_LSDIV:
 			*inst |= IDIV;
 			break;
 		}
@@ -1258,7 +1259,7 @@
 #endif
 
 	CHECK_ERROR();
-	check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw);
+	CHECK(check_sljit_emit_op1(compiler, op, dst, dstw, src, srcw));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
@@ -1743,7 +1744,7 @@
 			*(sljit_si*)inst = (sljit_si)src2w;
 		}
 		else {
-			EMIT_MOV(compiler, TMP_REG2, 0, SLJIT_IMM, src1w);
+			EMIT_MOV(compiler, TMP_REG2, 0, SLJIT_IMM, src2w);
 			if (dst_r != src1)
 				EMIT_MOV(compiler, dst_r, 0, src1, src1w);
 			inst = emit_x86_instruction(compiler, 2, dst_r, 0, TMP_REG2, 0);
@@ -2118,7 +2119,7 @@
 	sljit_si src2, sljit_sw src2w)
 {
 	CHECK_ERROR();
-	check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	CHECK(check_sljit_emit_op2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -2209,7 +2210,7 @@
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg)
 {
-	check_sljit_get_register_index(reg);
+	CHECK_REG_INDEX(check_sljit_get_register_index(reg));
 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
 	if (reg >= SLJIT_R3 && reg <= SLJIT_R6)
 		return -1;
@@ -2219,7 +2220,7 @@
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_float_register_index(sljit_si reg)
 {
-	check_sljit_get_float_register_index(reg);
+	CHECK_REG_INDEX(check_sljit_get_float_register_index(reg));
 	return reg;
 }
 
@@ -2229,8 +2230,7 @@
 	sljit_ub *inst;
 
 	CHECK_ERROR();
-	check_sljit_emit_op_custom(compiler, instruction, size);
-	SLJIT_ASSERT(size > 0 && size < 16);
+	CHECK(check_sljit_emit_op_custom(compiler, instruction, size));
 
 	inst = (sljit_ub*)ensure_buf(compiler, 1 + size);
 	FAIL_IF(!inst);
@@ -2391,7 +2391,7 @@
 	CHECK_ERROR();
 	SELECT_FOP1_OPERATION_WITH_CHECKS(compiler, op, dst, dstw, src, srcw);
 
-	if (GET_OPCODE(op) == SLJIT_MOVD) {
+	if (GET_OPCODE(op) == SLJIT_DMOV) {
 		if (FAST_IS_REG(dst))
 			return emit_sse2_load(compiler, op & SLJIT_SINGLE_OP, dst, src, srcw);
 		if (FAST_IS_REG(src))
@@ -2430,11 +2430,11 @@
 	}
 
 	switch (GET_OPCODE(op)) {
-	case SLJIT_NEGD:
+	case SLJIT_DNEG:
 		FAIL_IF(emit_sse2_logic(compiler, XORPD_x_xm, 1, dst_r, SLJIT_MEM0(), (sljit_sw)(op & SLJIT_SINGLE_OP ? sse2_buffer : sse2_buffer + 8)));
 		break;
 
-	case SLJIT_ABSD:
+	case SLJIT_DABS:
 		FAIL_IF(emit_sse2_logic(compiler, ANDPD_x_xm, 1, dst_r, SLJIT_MEM0(), (sljit_sw)(op & SLJIT_SINGLE_OP ? sse2_buffer + 4 : sse2_buffer + 12)));
 		break;
 	}
@@ -2452,7 +2452,7 @@
 	sljit_si dst_r;
 
 	CHECK_ERROR();
-	check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w);
+	CHECK(check_sljit_emit_fop2(compiler, op, dst, dstw, src1, src1w, src2, src2w));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 	ADJUST_LOCAL_OFFSET(src1, src1w);
 	ADJUST_LOCAL_OFFSET(src2, src2w);
@@ -2465,7 +2465,7 @@
 		dst_r = dst;
 		if (dst == src1)
 			; /* Do nothing here. */
-		else if (dst == src2 && (op == SLJIT_ADDD || op == SLJIT_MULD)) {
+		else if (dst == src2 && (op == SLJIT_DADD || op == SLJIT_DMUL)) {
 			/* Swap arguments. */
 			src2 = src1;
 			src2w = src1w;
@@ -2483,19 +2483,19 @@
 	}
 
 	switch (GET_OPCODE(op)) {
-	case SLJIT_ADDD:
+	case SLJIT_DADD:
 		FAIL_IF(emit_sse2(compiler, ADDSD_x_xm, op & SLJIT_SINGLE_OP, dst_r, src2, src2w));
 		break;
 
-	case SLJIT_SUBD:
+	case SLJIT_DSUB:
 		FAIL_IF(emit_sse2(compiler, SUBSD_x_xm, op & SLJIT_SINGLE_OP, dst_r, src2, src2w));
 		break;
 
-	case SLJIT_MULD:
+	case SLJIT_DMUL:
 		FAIL_IF(emit_sse2(compiler, MULSD_x_xm, op & SLJIT_SINGLE_OP, dst_r, src2, src2w));
 		break;
 
-	case SLJIT_DIVD:
+	case SLJIT_DDIV:
 		FAIL_IF(emit_sse2(compiler, DIVSD_x_xm, op & SLJIT_SINGLE_OP, dst_r, src2, src2w));
 		break;
 	}
@@ -2515,7 +2515,7 @@
 	struct sljit_label *label;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_label(compiler);
+	CHECK_PTR(check_sljit_emit_label(compiler));
 
 	/* We should restore the flags before the label,
 	   since other taken jumps has their own flags as well. */
@@ -2544,7 +2544,7 @@
 	struct sljit_jump *jump;
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_jump(compiler, type);
+	CHECK_PTR(check_sljit_emit_jump(compiler, type));
 
 	if (SLJIT_UNLIKELY(compiler->flags_saved)) {
 		if ((type & 0xff) <= SLJIT_JUMP)
@@ -2581,7 +2581,7 @@
 	struct sljit_jump *jump;
 
 	CHECK_ERROR();
-	check_sljit_emit_ijump(compiler, type, src, srcw);
+	CHECK(check_sljit_emit_ijump(compiler, type, src, srcw));
 	ADJUST_LOCAL_OFFSET(src, srcw);
 
 	CHECK_EXTRA_REGS(src, srcw, (void)0);
@@ -2660,7 +2660,8 @@
 #endif
 
 	CHECK_ERROR();
-	check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type);
+	CHECK(check_sljit_emit_op_flags(compiler, op, dst, dstw, src, srcw, type));
+	SLJIT_UNUSED_ARG(srcw);
 
 	if (dst == SLJIT_UNUSED)
 		return SLJIT_SUCCESS;
@@ -2670,6 +2671,7 @@
 	if (SLJIT_UNLIKELY(compiler->flags_saved))
 		FAIL_IF(emit_restore_flags(compiler, op & SLJIT_KEEP_FLAGS));
 
+	type &= 0xff;
 	/* setcc = jcc + 0x10. */
 	cond_set = get_jump_code(type) + 0x10;
 
@@ -2711,7 +2713,8 @@
 		compiler->mode32 = GET_OPCODE(op) != SLJIT_MOV;
 		return emit_mov(compiler, dst, dstw, TMP_REG1, 0);
 	}
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+		|| (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 	compiler->skip_checks = 1;
 #endif
 	return sljit_emit_op2(compiler, op, dst, dstw, dst, dstw, TMP_REG1, 0);
@@ -2821,7 +2824,8 @@
 	if (GET_OPCODE(op) < SLJIT_ADD)
 		return emit_mov(compiler, dst, dstw, TMP_REG1, 0);
 
-#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) \
+		|| (defined SLJIT_ARGUMENT_CHECKS && SLJIT_ARGUMENT_CHECKS)
 	compiler->skip_checks = 1;
 #endif
 	return sljit_emit_op2(compiler, op, dst_save, dstw_save, dst_save, dstw_save, TMP_REG1, 0);
@@ -2831,7 +2835,7 @@
 SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_local_base(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw offset)
 {
 	CHECK_ERROR();
-	check_sljit_get_local_base(compiler, dst, dstw, offset);
+	CHECK(check_sljit_get_local_base(compiler, dst, dstw, offset));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	CHECK_EXTRA_REGS(dst, dstw, (void)0);
@@ -2868,7 +2872,7 @@
 #endif
 
 	CHECK_ERROR_PTR();
-	check_sljit_emit_const(compiler, dst, dstw, init_value);
+	CHECK_PTR(check_sljit_emit_const(compiler, dst, dstw, init_value));
 	ADJUST_LOCAL_OFFSET(dst, dstw);
 
 	CHECK_EXTRA_REGS(dst, dstw, (void)0);
diff --git a/dist/sljit/sljitUtils.c b/dist/sljit/sljitUtils.c
index b29b403..5294b5f 100644
--- a/dist/sljit/sljitUtils.c
+++ b/dist/sljit/sljitUtils.c
@@ -200,7 +200,7 @@
 /* Planning to make it even more clever in the future. */
 static sljit_sw sljit_page_align = 0;
 
-SLJIT_API_FUNC_ATTRIBUTE struct sljit_stack* SLJIT_CALL sljit_allocate_stack(sljit_uw limit, sljit_uw max_limit)
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_stack* SLJIT_CALL sljit_allocate_stack(sljit_uw limit, sljit_uw max_limit, void *allocator_data)
 {
 	struct sljit_stack *stack;
 	union {
@@ -211,6 +211,7 @@
 	SYSTEM_INFO si;
 #endif
 
+	SLJIT_UNUSED_ARG(allocator_data);
 	if (limit > max_limit || limit < 1)
 		return NULL;
 
@@ -232,21 +233,21 @@
 	/* Align limit and max_limit. */
 	max_limit = (max_limit + sljit_page_align) & ~sljit_page_align;
 
-	stack = (struct sljit_stack*)SLJIT_MALLOC(sizeof(struct sljit_stack));
+	stack = (struct sljit_stack*)SLJIT_MALLOC(sizeof(struct sljit_stack), allocator_data);
 	if (!stack)
 		return NULL;
 
 #ifdef _WIN32
 	base.ptr = VirtualAlloc(NULL, max_limit, MEM_RESERVE, PAGE_READWRITE);
 	if (!base.ptr) {
-		SLJIT_FREE(stack);
+		SLJIT_FREE(stack, allocator_data);
 		return NULL;
 	}
 	stack->base = base.uw;
 	stack->limit = stack->base;
 	stack->max_limit = stack->base + max_limit;
 	if (sljit_stack_resize(stack, stack->base + limit)) {
-		sljit_free_stack(stack);
+		sljit_free_stack(stack, allocator_data);
 		return NULL;
 	}
 #else
@@ -255,14 +256,14 @@
 #else
 	if (dev_zero < 0) {
 		if (open_dev_zero()) {
-			SLJIT_FREE(stack);
+			SLJIT_FREE(stack, allocator_data);
 			return NULL;
 		}
 	}
 	base.ptr = mmap(NULL, max_limit, PROT_READ | PROT_WRITE, MAP_PRIVATE, dev_zero, 0);
 #endif
 	if (base.ptr == MAP_FAILED) {
-		SLJIT_FREE(stack);
+		SLJIT_FREE(stack, allocator_data);
 		return NULL;
 	}
 	stack->base = base.uw;
@@ -275,14 +276,15 @@
 
 #undef PAGE_ALIGN
 
-SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_free_stack(struct sljit_stack* stack)
+SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_free_stack(struct sljit_stack* stack, void *allocator_data)
 {
+	SLJIT_UNUSED_ARG(allocator_data);
 #ifdef _WIN32
 	VirtualFree((void*)stack->base, 0, MEM_RELEASE);
 #else
 	munmap((void*)stack->base, stack->max_limit - stack->base);
 #endif
-	SLJIT_FREE(stack);
+	SLJIT_FREE(stack, allocator_data);
 }
 
 SLJIT_API_FUNC_ATTRIBUTE sljit_sw SLJIT_CALL sljit_stack_resize(struct sljit_stack* stack, sljit_uw new_limit)
diff --git a/dist/test-driver b/dist/test-driver
index d306056..8e575b0 100755
--- a/dist/test-driver
+++ b/dist/test-driver
@@ -3,7 +3,7 @@
 
 scriptversion=2013-07-13.22; # UTC
 
-# Copyright (C) 2011-2013 Free Software Foundation, Inc.
+# Copyright (C) 2011-2014 Free Software Foundation, Inc.
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -106,11 +106,14 @@
 # Test script is run here.
 "$@" >$log_file 2>&1
 estatus=$?
+
 if test $enable_hard_errors = no && test $estatus -eq 99; then
-  estatus=1
+  tweaked_estatus=1
+else
+  tweaked_estatus=$estatus
 fi
 
-case $estatus:$expect_failure in
+case $tweaked_estatus:$expect_failure in
   0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
   0:*)   col=$grn res=PASS  recheck=no  gcopy=no;;
   77:*)  col=$blu res=SKIP  recheck=no  gcopy=yes;;
@@ -119,6 +122,12 @@
   *:*)   col=$red res=FAIL  recheck=yes gcopy=yes;;
 esac
 
+# Report the test outcome and exit status in the logs, so that one can
+# know whether the test passed or failed simply by looking at the '.log'
+# file, without the need of also peaking into the corresponding '.trs'
+# file (automake bug#11814).
+echo "$res $test_name (exit status: $estatus)" >>$log_file
+
 # Report outcome to console.
 echo "${col}${res}${std}: $test_name"
 
diff --git a/dist/testdata/grepinput8 b/dist/testdata/grepinput8
index 7163aa6..c4b8c44 100644
--- a/dist/testdata/grepinput8
+++ b/dist/testdata/grepinput8
Binary files differ
diff --git a/dist/testdata/grepoutput b/dist/testdata/grepoutput
index 9bf9d9d..4d61752 100644
--- a/dist/testdata/grepoutput
+++ b/dist/testdata/grepoutput
Binary files differ
diff --git a/dist/testdata/grepoutput8 b/dist/testdata/grepoutput8
index 385266b..91493bd 100644
--- a/dist/testdata/grepoutput8
+++ b/dist/testdata/grepoutput8
Binary files differ
diff --git a/dist/testdata/grepoutputN b/dist/testdata/grepoutputN
index 6760314..1f9f880 100644
--- a/dist/testdata/grepoutputN
+++ b/dist/testdata/grepoutputN
Binary files differ
diff --git a/dist/testdata/greppatN4 b/dist/testdata/greppatN4
index 7112d84..ea1bfc7 100644
--- a/dist/testdata/greppatN4
+++ b/dist/testdata/greppatN4
@@ -1,2 +1,2 @@
-xxx
+xxx
 jkl
\ No newline at end of file
diff --git a/dist/testdata/testinput1 b/dist/testdata/testinput1
index 123e3d3..73c2f4d 100644
--- a/dist/testdata/testinput1
+++ b/dist/testdata/testinput1
@@ -5720,4 +5720,14 @@
 /[\Q]a\E]+/
     aa]]
 
+/(?:((abcd))|(((?:(?:(?:(?:abc|(?:abcdef))))b)abcdefghi)abc)|((*ACCEPT)))/
+    1234abcd
+
+/(\2)(\1)/
+
+"Z*(|d*){216}"
+
+"(?1)(?#?'){8}(a)"
+    baaaaaaaaac
+
 /-- End of testinput1 --/
diff --git a/dist/testdata/testinput11 b/dist/testdata/testinput11
index 7e8e542..65a4b03 100644
--- a/dist/testdata/testinput11
+++ b/dist/testdata/testinput11
@@ -134,4 +134,6 @@
 
 /(((a\2)|(a*)\g<-1>))*a?/B
 
+/((?+1)(\1))/B
+
 /-- End of testinput11 --/
diff --git a/dist/testdata/testinput12 b/dist/testdata/testinput12
index 5d727af..d68551f 100644
--- a/dist/testdata/testinput12
+++ b/dist/testdata/testinput12
@@ -87,4 +87,12 @@
 /^12345678abcd/mS++
     12345678abcd
 
+/-- Test pattern compilation --/ 
+
+/(?:a|b|c|d|e)(?R)/S++
+
+/(?:a|b|c|d|e)(?R)(?R)/S++
+
+/(a(?:a|b|c|d|e)b){8,16}/S++
+
 /-- End of testinput12 --/
diff --git a/dist/testdata/testinput2 b/dist/testdata/testinput2
index c6816bf..58fe53b 100644
--- a/dist/testdata/testinput2
+++ b/dist/testdata/testinput2
@@ -1380,6 +1380,8 @@
     1X
     123456\P
 
+//KF>/dev/null
+
 /abc/IS>testsavedregex
 <testsavedregex
     abc
@@ -4078,4 +4080,76 @@
 
 /\x{whatever}/
 
+"((?=(?(?=(?(?=(?(?=()))))))))"
+    a
+
+"(?(?=)==)(((((((((?=)))))))))"
+    a
+
+/^(?:(a)|b)(?(1)A|B)/I
+    aA123\O3
+    aA123\O6
+
+'^(?:(?<AA>a)|b)(?(<AA>)A|B)'
+    aA123\O3
+    aA123\O6
+
+'^(?<AA>)(?:(?<AA>a)|b)(?(<AA>)A|B)'J
+    aA123\O3
+    aA123\O6
+
+'^(?:(?<AA>X)|)(?:(?<AA>a)|b)\k{AA}'J
+    aa123\O3
+    aa123\O6
+
+/(?<N111>(?J)(?<N111>1(111111)11|)1|1|)(?(<N111>)1)/
+
+/(?(?=0)?)+/
+
+/(?(?=0)(?=00)?00765)/
+     00765
+
+/(?(?=0)(?=00)?00765|(?!3).56)/
+     00765
+     456
+     ** Failers
+     356   
+
+'^(a)*+(\w)'
+    g
+    g\O3
+
+'^(?:a)*+(\w)'
+    g
+    g\O3
+
+//C
+    \O\C+
+
+"((?2){0,1999}())?"
+
+/((?+1)(\1))/BZ
+
+/(?(?!)a|b)/
+    bbb
+    aaa 
+
+"((?2)+)((?1))"
+
+"(?(?<E>.*!.*)?)"
+
+"X((?2)()*+){2}+"BZ
+
+"X((?2)()*+){2}"BZ
+
+"(?<=((?2))((?1)))"
+
+/(?<=\Ka)/g+
+    aaaaa
+
+/(?<=\Ka)/G+
+    aaaaa
+
+/((?2){73}(?2))((?1))/
+
 /-- End of testinput2 --/
diff --git a/dist/testdata/testinput4 b/dist/testdata/testinput4
index 0110267..8bdbdac 100644
--- a/dist/testdata/testinput4
+++ b/dist/testdata/testinput4
@@ -722,4 +722,9 @@
 /^#[^\x{ffff}]#[^\x{ffff}]#[^\x{ffff}]#/8
     #\x{10000}#\x{100}#\x{10ffff}#
 
+"[\S\V\H]"8
+
+/\C(\W?ſ)'?{{/8
+    \\C(\\W?ſ)'?{{
+
 /-- End of testinput4 --/
diff --git a/dist/testdata/testinput5 b/dist/testdata/testinput5
index e36b09d..28561a9 100644
--- a/dist/testdata/testinput5
+++ b/dist/testdata/testinput5
Binary files differ
diff --git a/dist/testdata/testinput6 b/dist/testdata/testinput6
index 82c3ed5..02cef0d 100644
--- a/dist/testdata/testinput6
+++ b/dist/testdata/testinput6
@@ -1496,4 +1496,10 @@
 /^s?c/mi8
     scat
 
+/[A-`]/i8
+    abcdefghijklmno
+
+/\C\X*QT/8
+    Ӆ\x0aT
+
 /-- End of testinput6 --/
diff --git a/dist/testdata/testinput8 b/dist/testdata/testinput8
index 06334cd..931dd71 100644
--- a/dist/testdata/testinput8
+++ b/dist/testdata/testinput8
@@ -4837,4 +4837,8 @@
 '\A(?:[^\"]++|\"(?:[^\"]++|\"\")*+\")++'
     NON QUOTED \"QUOT\"\"ED\" AFTER \"NOT MATCHED
 
+/(?(?!)a|b)/
+    bbb
+    aaa 
+
 /-- End of testinput8 --/
diff --git a/dist/testdata/testoutput1 b/dist/testdata/testoutput1
index 5e71900..0a53fd0 100644
--- a/dist/testdata/testoutput1
+++ b/dist/testdata/testoutput1
@@ -9411,4 +9411,22 @@
     aa]]
  0: aa]]
 
+/(?:((abcd))|(((?:(?:(?:(?:abc|(?:abcdef))))b)abcdefghi)abc)|((*ACCEPT)))/
+    1234abcd
+ 0: 
+ 1: <unset>
+ 2: <unset>
+ 3: <unset>
+ 4: <unset>
+ 5: 
+
+/(\2)(\1)/
+
+"Z*(|d*){216}"
+
+"(?1)(?#?'){8}(a)"
+    baaaaaaaaac
+ 0: aaaaaaaaa
+ 1: a
+
 /-- End of testinput1 --/
diff --git a/dist/testdata/testoutput11-16 b/dist/testdata/testoutput11-16
index a1db3f3..422f2ad 100644
--- a/dist/testdata/testoutput11-16
+++ b/dist/testdata/testoutput11-16
@@ -231,7 +231,7 @@
 ------------------------------------------------------------------
 
 /(?P<a>a)...(?P=a)bbb(?P>a)d/BM
-Memory allocation (code space): 57
+Memory allocation (code space): 61
 ------------------------------------------------------------------
   0  24 Bra
   2   5 CBra 1
@@ -733,4 +733,19 @@
  41     End
 ------------------------------------------------------------------
 
+/((?+1)(\1))/B
+------------------------------------------------------------------
+  0  20 Bra
+  2  16 Once
+  4  12 CBra 1
+  7   9 Recurse
+  9   5 CBra 2
+ 12     \1
+ 14   5 Ket
+ 16  12 Ket
+ 18  16 Ket
+ 20  20 Ket
+ 22     End
+------------------------------------------------------------------
+
 /-- End of testinput11 --/
diff --git a/dist/testdata/testoutput11-32 b/dist/testdata/testoutput11-32
index 7b7b030..d953ec8 100644
--- a/dist/testdata/testoutput11-32
+++ b/dist/testdata/testoutput11-32
@@ -231,7 +231,7 @@
 ------------------------------------------------------------------
 
 /(?P<a>a)...(?P=a)bbb(?P>a)d/BM
-Memory allocation (code space): 117
+Memory allocation (code space): 125
 ------------------------------------------------------------------
   0  24 Bra
   2   5 CBra 1
@@ -733,4 +733,19 @@
  41     End
 ------------------------------------------------------------------
 
+/((?+1)(\1))/B
+------------------------------------------------------------------
+  0  20 Bra
+  2  16 Once
+  4  12 CBra 1
+  7   9 Recurse
+  9   5 CBra 2
+ 12     \1
+ 14   5 Ket
+ 16  12 Ket
+ 18  16 Ket
+ 20  20 Ket
+ 22     End
+------------------------------------------------------------------
+
 /-- End of testinput11 --/
diff --git a/dist/testdata/testoutput11-8 b/dist/testdata/testoutput11-8
index f5ec652..6ec18ec 100644
--- a/dist/testdata/testoutput11-8
+++ b/dist/testdata/testoutput11-8
@@ -231,7 +231,7 @@
 ------------------------------------------------------------------
 
 /(?P<a>a)...(?P=a)bbb(?P>a)d/BM
-Memory allocation (code space): 34
+Memory allocation (code space): 38
 ------------------------------------------------------------------
   0  30 Bra
   3   7 CBra 1
@@ -733,4 +733,19 @@
  60     End
 ------------------------------------------------------------------
 
+/((?+1)(\1))/B
+------------------------------------------------------------------
+  0  31 Bra
+  3  25 Once
+  6  19 CBra 1
+ 11  14 Recurse
+ 14   8 CBra 2
+ 19     \1
+ 22   8 Ket
+ 25  19 Ket
+ 28  25 Ket
+ 31  31 Ket
+ 34     End
+------------------------------------------------------------------
+
 /-- End of testinput11 --/
diff --git a/dist/testdata/testoutput12 b/dist/testdata/testoutput12
index 67ad2c8..7a1cf69 100644
--- a/dist/testdata/testoutput12
+++ b/dist/testdata/testoutput12
@@ -176,4 +176,12 @@
     12345678abcd
  0: 12345678abcd (JIT)
 
+/-- Test pattern compilation --/ 
+
+/(?:a|b|c|d|e)(?R)/S++
+
+/(?:a|b|c|d|e)(?R)(?R)/S++
+
+/(a(?:a|b|c|d|e)b){8,16}/S++
+
 /-- End of testinput12 --/
diff --git a/dist/testdata/testoutput2 b/dist/testdata/testoutput2
index 1e87026..b718df0 100644
--- a/dist/testdata/testoutput2
+++ b/dist/testdata/testoutput2
@@ -561,7 +561,7 @@
 Failed: reference to non-existent subpattern at offset 7
 
 /(?(?<ab))/
-Failed: syntax error in subpattern name (missing terminator) at offset 7
+Failed: assertion expected after (?( at offset 3
 
 /((?s)blah)\s+\1/I
 Capturing subpattern count = 1
@@ -1566,30 +1566,35 @@
 
 /a(?(1)b)(.)/I
 Capturing subpattern count = 1
+Max back reference = 1
 No options
 First char = 'a'
 No need char
 
 /a(?(1)bag|big)(.)/I
 Capturing subpattern count = 1
+Max back reference = 1
 No options
 First char = 'a'
 Need char = 'g'
 
 /a(?(1)bag|big)*(.)/I
 Capturing subpattern count = 1
+Max back reference = 1
 No options
 First char = 'a'
 No need char
 
 /a(?(1)bag|big)+(.)/I
 Capturing subpattern count = 1
+Max back reference = 1
 No options
 First char = 'a'
 Need char = 'g'
 
 /a(?(1)b..|b..)(.)/I
 Capturing subpattern count = 1
+Max back reference = 1
 No options
 First char = 'a'
 Need char = 'b'
@@ -3379,24 +3384,28 @@
 
 /(?(1)ab|ac)(.)/I
 Capturing subpattern count = 1
+Max back reference = 1
 No options
 First char = 'a'
 No need char
 
 /(?(1)abz|acz)(.)/I
 Capturing subpattern count = 1
+Max back reference = 1
 No options
 First char = 'a'
 Need char = 'z'
 
 /(?(1)abz)(.)/I
 Capturing subpattern count = 1
+Max back reference = 1
 No options
 No first char
 No need char
 
 /(?(1)abz)(1)23/I
 Capturing subpattern count = 1
+Max back reference = 1
 No options
 No first char
 Need char = '3'
@@ -5605,6 +5614,10 @@
     123456\P
 No match
 
+//KF>/dev/null
+Compiled pattern written to /dev/null
+Study data written to /dev/null
+
 /abc/IS>testsavedregex
 Capturing subpattern count = 0
 No options
@@ -6336,6 +6349,7 @@
 
 /^(?P<A>a)?(?(A)a|b)/I
 Capturing subpattern count = 1
+Max back reference = 1
 Named capturing subpatterns:
   A   1
 Options: anchored
@@ -6353,6 +6367,7 @@
 
 /(?:(?(ZZ)a|b)(?P<ZZ>X))+/I
 Capturing subpattern count = 1
+Max back reference = 1
 Named capturing subpatterns:
   ZZ   1
 No options
@@ -6370,6 +6385,7 @@
 
 /(?:(?(ZZ)a|b)(?(ZZ)a|b)(?P<ZZ>X))+/I
 Capturing subpattern count = 1
+Max back reference = 1
 Named capturing subpatterns:
   ZZ   1
 No options
@@ -6381,6 +6397,7 @@
 
 /(?:(?(ZZ)a|\(b\))\\(?P<ZZ>X))+/I
 Capturing subpattern count = 1
+Max back reference = 1
 Named capturing subpatterns:
   ZZ   1
 No options
@@ -10226,6 +10243,7 @@
   (?(1)|.)                    # check that there was an empty component
   /xiIS
 Capturing subpattern count = 1
+Max back reference = 1
 Options: anchored caseless extended
 No first char
 Need char = ':'
@@ -10255,6 +10273,7 @@
     b(?<quote> (?<apostrophe>')|(?<realquote>")) ) 
     (?('quote')[a-z]+|[0-9]+)/JIx
 Capturing subpattern count = 6
+Max back reference = 1
 Named capturing subpatterns:
   apostrophe   2
   apostrophe   5
@@ -10317,6 +10336,7 @@
         End
 ------------------------------------------------------------------
 Capturing subpattern count = 4
+Max back reference = 4
 Named capturing subpatterns:
   D   4
   D   1
@@ -10364,6 +10384,7 @@
         End
 ------------------------------------------------------------------
 Capturing subpattern count = 4
+Max back reference = 1
 Named capturing subpatterns:
   A   1
   A   4
@@ -10486,6 +10507,7 @@
     
 /()i(?(1)a)/SI 
 Capturing subpattern count = 1
+Max back reference = 1
 No options
 No first char
 Need char = 'i'
@@ -14206,4 +14228,199 @@
 /\x{whatever}/
 Failed: non-hex character in \x{} (closing brace missing?) at offset 3
 
+"((?=(?(?=(?(?=(?(?=()))))))))"
+    a
+ 0: 
+ 1: 
+ 2: 
+
+"(?(?=)==)(((((((((?=)))))))))"
+    a
+No match
+
+/^(?:(a)|b)(?(1)A|B)/I
+Capturing subpattern count = 1
+Max back reference = 1
+Options: anchored
+No first char
+No need char
+    aA123\O3
+Matched, but too many substrings
+ 0: aA
+    aA123\O6
+ 0: aA
+ 1: a
+
+'^(?:(?<AA>a)|b)(?(<AA>)A|B)'
+    aA123\O3
+Matched, but too many substrings
+ 0: aA
+    aA123\O6
+ 0: aA
+ 1: a
+
+'^(?<AA>)(?:(?<AA>a)|b)(?(<AA>)A|B)'J
+    aA123\O3
+Matched, but too many substrings
+ 0: aA
+    aA123\O6
+Matched, but too many substrings
+ 0: aA
+ 1: 
+
+'^(?:(?<AA>X)|)(?:(?<AA>a)|b)\k{AA}'J
+    aa123\O3
+Matched, but too many substrings
+ 0: aa
+    aa123\O6
+Matched, but too many substrings
+ 0: aa
+ 1: <unset>
+
+/(?<N111>(?J)(?<N111>1(111111)11|)1|1|)(?(<N111>)1)/
+
+/(?(?=0)?)+/
+Failed: nothing to repeat at offset 7
+
+/(?(?=0)(?=00)?00765)/
+     00765
+ 0: 00765
+
+/(?(?=0)(?=00)?00765|(?!3).56)/
+     00765
+ 0: 00765
+     456
+ 0: 456
+     ** Failers
+No match
+     356   
+No match
+
+'^(a)*+(\w)'
+    g
+ 0: g
+ 1: <unset>
+ 2: g
+    g\O3
+Matched, but too many substrings
+ 0: g
+
+'^(?:a)*+(\w)'
+    g
+ 0: g
+ 1: g
+    g\O3
+Matched, but too many substrings
+ 0: g
+
+//C
+    \O\C+
+Callout 255: last capture = -1
+--->
+ +0 ^    
+Matched, but too many substrings
+
+"((?2){0,1999}())?"
+
+/((?+1)(\1))/BZ
+------------------------------------------------------------------
+        Bra
+        Once
+        CBra 1
+        Recurse
+        CBra 2
+        \1
+        Ket
+        Ket
+        Ket
+        Ket
+        End
+------------------------------------------------------------------
+
+/(?(?!)a|b)/
+    bbb
+ 0: b
+    aaa 
+No match
+
+"((?2)+)((?1))"
+
+"(?(?<E>.*!.*)?)"
+Failed: assertion expected after (?( at offset 3
+
+"X((?2)()*+){2}+"BZ
+------------------------------------------------------------------
+        Bra
+        X
+        Once
+        CBra 1
+        Recurse
+        Braposzero
+        SCBraPos 2
+        KetRpos
+        Ket
+        CBra 1
+        Recurse
+        Braposzero
+        SCBraPos 2
+        KetRpos
+        Ket
+        Ket
+        Ket
+        End
+------------------------------------------------------------------
+
+"X((?2)()*+){2}"BZ
+------------------------------------------------------------------
+        Bra
+        X
+        CBra 1
+        Recurse
+        Braposzero
+        SCBraPos 2
+        KetRpos
+        Ket
+        CBra 1
+        Recurse
+        Braposzero
+        SCBraPos 2
+        KetRpos
+        Ket
+        Ket
+        End
+------------------------------------------------------------------
+
+"(?<=((?2))((?1)))"
+Failed: lookbehind assertion is not fixed length at offset 17
+
+/(?<=\Ka)/g+
+    aaaaa
+ 0: a
+ 0+ aaaa
+ 0: a
+ 0+ aaaa
+ 0: a
+ 0+ aaa
+ 0: a
+ 0+ aa
+ 0: a
+ 0+ a
+ 0: a
+ 0+ 
+
+/(?<=\Ka)/G+
+    aaaaa
+ 0: a
+ 0+ aaaa
+ 0: a
+ 0+ aaa
+ 0: a
+ 0+ aa
+ 0: a
+ 0+ a
+ 0: a
+ 0+ 
+
+/((?2){73}(?2))((?1))/
+
 /-- End of testinput2 --/
diff --git a/dist/testdata/testoutput4 b/dist/testdata/testoutput4
index dcf13b0..d43c123 100644
--- a/dist/testdata/testoutput4
+++ b/dist/testdata/testoutput4
@@ -1271,4 +1271,10 @@
     #\x{10000}#\x{100}#\x{10ffff}#
  0: #\x{10000}#\x{100}#\x{10ffff}#
 
+"[\S\V\H]"8
+
+/\C(\W?ſ)'?{{/8
+    \\C(\\W?ſ)'?{{
+No match
+
 /-- End of testinput4 --/
diff --git a/dist/testdata/testoutput5 b/dist/testdata/testoutput5
index 5c098e6..bab989c 100644
--- a/dist/testdata/testoutput5
+++ b/dist/testdata/testoutput5
Binary files differ
diff --git a/dist/testdata/testoutput6 b/dist/testdata/testoutput6
index a990ba1..3f035b8 100644
--- a/dist/testdata/testoutput6
+++ b/dist/testdata/testoutput6
@@ -2461,4 +2461,12 @@
     scat
  0: sc
 
+/[A-`]/i8
+    abcdefghijklmno
+ 0: a
+
+/\C\X*QT/8
+    Ӆ\x0aT
+No match
+
 /-- End of testinput6 --/
diff --git a/dist/testdata/testoutput8 b/dist/testdata/testoutput8
index 95c4e4d..e4fa497 100644
--- a/dist/testdata/testoutput8
+++ b/dist/testdata/testoutput8
@@ -7785,4 +7785,10 @@
     NON QUOTED \"QUOT\"\"ED\" AFTER \"NOT MATCHED
  0: NON QUOTED "QUOT""ED" AFTER 
 
+/(?(?!)a|b)/
+    bbb
+ 0: b
+    aaa 
+No match
+
 /-- End of testinput8 --/