|  | /* | 
|  | *  Entropy accumulator implementation | 
|  | * | 
|  | *  Copyright The Mbed TLS Contributors | 
|  | *  SPDX-License-Identifier: Apache-2.0 | 
|  | * | 
|  | *  Licensed under the Apache License, Version 2.0 (the "License"); you may | 
|  | *  not use this file except in compliance with the License. | 
|  | *  You may obtain a copy of the License at | 
|  | * | 
|  | *  http://www.apache.org/licenses/LICENSE-2.0 | 
|  | * | 
|  | *  Unless required by applicable law or agreed to in writing, software | 
|  | *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT | 
|  | *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
|  | *  See the License for the specific language governing permissions and | 
|  | *  limitations under the License. | 
|  | */ | 
|  |  | 
|  | #include "common.h" | 
|  |  | 
|  | #if defined(MBEDTLS_ENTROPY_C) | 
|  |  | 
|  | #include "mbedtls/entropy.h" | 
|  | #include "entropy_poll.h" | 
|  | #include "mbedtls/platform_util.h" | 
|  | #include "mbedtls/error.h" | 
|  |  | 
|  | #include <string.h> | 
|  |  | 
|  | #if defined(MBEDTLS_FS_IO) | 
|  | #include <stdio.h> | 
|  | #endif | 
|  |  | 
|  | #include "mbedtls/platform.h" | 
|  |  | 
|  | #define ENTROPY_MAX_LOOP    256     /**< Maximum amount to loop before error */ | 
|  |  | 
|  | void mbedtls_entropy_init(mbedtls_entropy_context *ctx) | 
|  | { | 
|  | ctx->source_count = 0; | 
|  | memset(ctx->source, 0, sizeof(ctx->source)); | 
|  |  | 
|  | #if defined(MBEDTLS_THREADING_C) | 
|  | mbedtls_mutex_init(&ctx->mutex); | 
|  | #endif | 
|  |  | 
|  | ctx->accumulator_started = 0; | 
|  | mbedtls_md_init(&ctx->accumulator); | 
|  |  | 
|  | /* Reminder: Update ENTROPY_HAVE_STRONG in the test files | 
|  | *           when adding more strong entropy sources here. */ | 
|  |  | 
|  | #if !defined(MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES) | 
|  | #if !defined(MBEDTLS_NO_PLATFORM_ENTROPY) | 
|  | mbedtls_entropy_add_source(ctx, mbedtls_platform_entropy_poll, NULL, | 
|  | MBEDTLS_ENTROPY_MIN_PLATFORM, | 
|  | MBEDTLS_ENTROPY_SOURCE_STRONG); | 
|  | #endif | 
|  | #if defined(MBEDTLS_ENTROPY_HARDWARE_ALT) | 
|  | mbedtls_entropy_add_source(ctx, mbedtls_hardware_poll, NULL, | 
|  | MBEDTLS_ENTROPY_MIN_HARDWARE, | 
|  | MBEDTLS_ENTROPY_SOURCE_STRONG); | 
|  | #endif | 
|  | #if defined(MBEDTLS_ENTROPY_NV_SEED) | 
|  | mbedtls_entropy_add_source(ctx, mbedtls_nv_seed_poll, NULL, | 
|  | MBEDTLS_ENTROPY_BLOCK_SIZE, | 
|  | MBEDTLS_ENTROPY_SOURCE_STRONG); | 
|  | ctx->initial_entropy_run = 0; | 
|  | #endif | 
|  | #endif /* MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES */ | 
|  | } | 
|  |  | 
|  | void mbedtls_entropy_free(mbedtls_entropy_context *ctx) | 
|  | { | 
|  | /* If the context was already free, don't call free() again. | 
|  | * This is important for mutexes which don't allow double-free. */ | 
|  | if (ctx->accumulator_started == -1) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | #if defined(MBEDTLS_THREADING_C) | 
|  | mbedtls_mutex_free(&ctx->mutex); | 
|  | #endif | 
|  | mbedtls_md_free(&ctx->accumulator); | 
|  | #if defined(MBEDTLS_ENTROPY_NV_SEED) | 
|  | ctx->initial_entropy_run = 0; | 
|  | #endif | 
|  | ctx->source_count = 0; | 
|  | mbedtls_platform_zeroize(ctx->source, sizeof(ctx->source)); | 
|  | ctx->accumulator_started = -1; | 
|  | } | 
|  |  | 
|  | int mbedtls_entropy_add_source(mbedtls_entropy_context *ctx, | 
|  | mbedtls_entropy_f_source_ptr f_source, void *p_source, | 
|  | size_t threshold, int strong) | 
|  | { | 
|  | int idx, ret = 0; | 
|  |  | 
|  | #if defined(MBEDTLS_THREADING_C) | 
|  | if ((ret = mbedtls_mutex_lock(&ctx->mutex)) != 0) { | 
|  | return ret; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | idx = ctx->source_count; | 
|  | if (idx >= MBEDTLS_ENTROPY_MAX_SOURCES) { | 
|  | ret = MBEDTLS_ERR_ENTROPY_MAX_SOURCES; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | ctx->source[idx].f_source  = f_source; | 
|  | ctx->source[idx].p_source  = p_source; | 
|  | ctx->source[idx].threshold = threshold; | 
|  | ctx->source[idx].strong    = strong; | 
|  |  | 
|  | ctx->source_count++; | 
|  |  | 
|  | exit: | 
|  | #if defined(MBEDTLS_THREADING_C) | 
|  | if (mbedtls_mutex_unlock(&ctx->mutex) != 0) { | 
|  | return MBEDTLS_ERR_THREADING_MUTEX_ERROR; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Entropy accumulator update | 
|  | */ | 
|  | static int entropy_update(mbedtls_entropy_context *ctx, unsigned char source_id, | 
|  | const unsigned char *data, size_t len) | 
|  | { | 
|  | unsigned char header[2]; | 
|  | unsigned char tmp[MBEDTLS_ENTROPY_BLOCK_SIZE]; | 
|  | size_t use_len = len; | 
|  | const unsigned char *p = data; | 
|  | int ret = 0; | 
|  |  | 
|  | if (use_len > MBEDTLS_ENTROPY_BLOCK_SIZE) { | 
|  | if ((ret = mbedtls_md(mbedtls_md_info_from_type(MBEDTLS_ENTROPY_MD), | 
|  | data, len, tmp)) != 0) { | 
|  | goto cleanup; | 
|  | } | 
|  | p = tmp; | 
|  | use_len = MBEDTLS_ENTROPY_BLOCK_SIZE; | 
|  | } | 
|  |  | 
|  | header[0] = source_id; | 
|  | header[1] = use_len & 0xFF; | 
|  |  | 
|  | /* | 
|  | * Start the accumulator if this has not already happened. Note that | 
|  | * it is sufficient to start the accumulator here only because all calls to | 
|  | * gather entropy eventually execute this code. | 
|  | */ | 
|  | if (ctx->accumulator_started == 0) { | 
|  | ret = mbedtls_md_setup(&ctx->accumulator, | 
|  | mbedtls_md_info_from_type(MBEDTLS_ENTROPY_MD), 0); | 
|  | if (ret != 0) { | 
|  | goto cleanup; | 
|  | } | 
|  | ret = mbedtls_md_starts(&ctx->accumulator); | 
|  | if (ret != 0) { | 
|  | goto cleanup; | 
|  | } | 
|  | ctx->accumulator_started = 1; | 
|  | } | 
|  | if ((ret = mbedtls_md_update(&ctx->accumulator, header, 2)) != 0) { | 
|  | goto cleanup; | 
|  | } | 
|  | ret = mbedtls_md_update(&ctx->accumulator, p, use_len); | 
|  |  | 
|  | cleanup: | 
|  | mbedtls_platform_zeroize(tmp, sizeof(tmp)); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int mbedtls_entropy_update_manual(mbedtls_entropy_context *ctx, | 
|  | const unsigned char *data, size_t len) | 
|  | { | 
|  | int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | 
|  |  | 
|  | #if defined(MBEDTLS_THREADING_C) | 
|  | if ((ret = mbedtls_mutex_lock(&ctx->mutex)) != 0) { | 
|  | return ret; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | ret = entropy_update(ctx, MBEDTLS_ENTROPY_SOURCE_MANUAL, data, len); | 
|  |  | 
|  | #if defined(MBEDTLS_THREADING_C) | 
|  | if (mbedtls_mutex_unlock(&ctx->mutex) != 0) { | 
|  | return MBEDTLS_ERR_THREADING_MUTEX_ERROR; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Run through the different sources to add entropy to our accumulator | 
|  | */ | 
|  | static int entropy_gather_internal(mbedtls_entropy_context *ctx) | 
|  | { | 
|  | int ret = MBEDTLS_ERR_ENTROPY_SOURCE_FAILED; | 
|  | int i; | 
|  | int have_one_strong = 0; | 
|  | unsigned char buf[MBEDTLS_ENTROPY_MAX_GATHER]; | 
|  | size_t olen; | 
|  |  | 
|  | if (ctx->source_count == 0) { | 
|  | return MBEDTLS_ERR_ENTROPY_NO_SOURCES_DEFINED; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Run through our entropy sources | 
|  | */ | 
|  | for (i = 0; i < ctx->source_count; i++) { | 
|  | if (ctx->source[i].strong == MBEDTLS_ENTROPY_SOURCE_STRONG) { | 
|  | have_one_strong = 1; | 
|  | } | 
|  |  | 
|  | olen = 0; | 
|  | if ((ret = ctx->source[i].f_source(ctx->source[i].p_source, | 
|  | buf, MBEDTLS_ENTROPY_MAX_GATHER, &olen)) != 0) { | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Add if we actually gathered something | 
|  | */ | 
|  | if (olen > 0) { | 
|  | if ((ret = entropy_update(ctx, (unsigned char) i, | 
|  | buf, olen)) != 0) { | 
|  | return ret; | 
|  | } | 
|  | ctx->source[i].size += olen; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (have_one_strong == 0) { | 
|  | ret = MBEDTLS_ERR_ENTROPY_NO_STRONG_SOURCE; | 
|  | } | 
|  |  | 
|  | cleanup: | 
|  | mbedtls_platform_zeroize(buf, sizeof(buf)); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Thread-safe wrapper for entropy_gather_internal() | 
|  | */ | 
|  | int mbedtls_entropy_gather(mbedtls_entropy_context *ctx) | 
|  | { | 
|  | int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | 
|  |  | 
|  | #if defined(MBEDTLS_THREADING_C) | 
|  | if ((ret = mbedtls_mutex_lock(&ctx->mutex)) != 0) { | 
|  | return ret; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | ret = entropy_gather_internal(ctx); | 
|  |  | 
|  | #if defined(MBEDTLS_THREADING_C) | 
|  | if (mbedtls_mutex_unlock(&ctx->mutex) != 0) { | 
|  | return MBEDTLS_ERR_THREADING_MUTEX_ERROR; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int mbedtls_entropy_func(void *data, unsigned char *output, size_t len) | 
|  | { | 
|  | int ret, count = 0, i, thresholds_reached; | 
|  | size_t strong_size; | 
|  | mbedtls_entropy_context *ctx = (mbedtls_entropy_context *) data; | 
|  | unsigned char buf[MBEDTLS_ENTROPY_BLOCK_SIZE]; | 
|  |  | 
|  | if (len > MBEDTLS_ENTROPY_BLOCK_SIZE) { | 
|  | return MBEDTLS_ERR_ENTROPY_SOURCE_FAILED; | 
|  | } | 
|  |  | 
|  | #if defined(MBEDTLS_ENTROPY_NV_SEED) | 
|  | /* Update the NV entropy seed before generating any entropy for outside | 
|  | * use. | 
|  | */ | 
|  | if (ctx->initial_entropy_run == 0) { | 
|  | ctx->initial_entropy_run = 1; | 
|  | if ((ret = mbedtls_entropy_update_nv_seed(ctx)) != 0) { | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #if defined(MBEDTLS_THREADING_C) | 
|  | if ((ret = mbedtls_mutex_lock(&ctx->mutex)) != 0) { | 
|  | return ret; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Always gather extra entropy before a call | 
|  | */ | 
|  | do { | 
|  | if (count++ > ENTROPY_MAX_LOOP) { | 
|  | ret = MBEDTLS_ERR_ENTROPY_SOURCE_FAILED; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if ((ret = entropy_gather_internal(ctx)) != 0) { | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | thresholds_reached = 1; | 
|  | strong_size = 0; | 
|  | for (i = 0; i < ctx->source_count; i++) { | 
|  | if (ctx->source[i].size < ctx->source[i].threshold) { | 
|  | thresholds_reached = 0; | 
|  | } | 
|  | if (ctx->source[i].strong == MBEDTLS_ENTROPY_SOURCE_STRONG) { | 
|  | strong_size += ctx->source[i].size; | 
|  | } | 
|  | } | 
|  | } while (!thresholds_reached || strong_size < MBEDTLS_ENTROPY_BLOCK_SIZE); | 
|  |  | 
|  | memset(buf, 0, MBEDTLS_ENTROPY_BLOCK_SIZE); | 
|  |  | 
|  | /* | 
|  | * Note that at this stage it is assumed that the accumulator was started | 
|  | * in a previous call to entropy_update(). If this is not guaranteed, the | 
|  | * code below will fail. | 
|  | */ | 
|  | if ((ret = mbedtls_md_finish(&ctx->accumulator, buf)) != 0) { | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reset accumulator and counters and recycle existing entropy | 
|  | */ | 
|  | mbedtls_md_free(&ctx->accumulator); | 
|  | mbedtls_md_init(&ctx->accumulator); | 
|  | ret = mbedtls_md_setup(&ctx->accumulator, | 
|  | mbedtls_md_info_from_type(MBEDTLS_ENTROPY_MD), 0); | 
|  | if (ret != 0) { | 
|  | goto exit; | 
|  | } | 
|  | ret = mbedtls_md_starts(&ctx->accumulator); | 
|  | if (ret != 0) { | 
|  | goto exit; | 
|  | } | 
|  | if ((ret = mbedtls_md_update(&ctx->accumulator, buf, | 
|  | MBEDTLS_ENTROPY_BLOCK_SIZE)) != 0) { | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Perform second hashing on entropy | 
|  | */ | 
|  | if ((ret = mbedtls_md(mbedtls_md_info_from_type(MBEDTLS_ENTROPY_MD), | 
|  | buf, MBEDTLS_ENTROPY_BLOCK_SIZE, buf)) != 0) { | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ctx->source_count; i++) { | 
|  | ctx->source[i].size = 0; | 
|  | } | 
|  |  | 
|  | memcpy(output, buf, len); | 
|  |  | 
|  | ret = 0; | 
|  |  | 
|  | exit: | 
|  | mbedtls_platform_zeroize(buf, sizeof(buf)); | 
|  |  | 
|  | #if defined(MBEDTLS_THREADING_C) | 
|  | if (mbedtls_mutex_unlock(&ctx->mutex) != 0) { | 
|  | return MBEDTLS_ERR_THREADING_MUTEX_ERROR; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #if defined(MBEDTLS_ENTROPY_NV_SEED) | 
|  | int mbedtls_entropy_update_nv_seed(mbedtls_entropy_context *ctx) | 
|  | { | 
|  | int ret = MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR; | 
|  | unsigned char buf[MBEDTLS_ENTROPY_BLOCK_SIZE]; | 
|  |  | 
|  | /* Read new seed  and write it to NV */ | 
|  | if ((ret = mbedtls_entropy_func(ctx, buf, MBEDTLS_ENTROPY_BLOCK_SIZE)) != 0) { | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (mbedtls_nv_seed_write(buf, MBEDTLS_ENTROPY_BLOCK_SIZE) < 0) { | 
|  | return MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR; | 
|  | } | 
|  |  | 
|  | /* Manually update the remaining stream with a separator value to diverge */ | 
|  | memset(buf, 0, MBEDTLS_ENTROPY_BLOCK_SIZE); | 
|  | ret = mbedtls_entropy_update_manual(ctx, buf, MBEDTLS_ENTROPY_BLOCK_SIZE); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | #endif /* MBEDTLS_ENTROPY_NV_SEED */ | 
|  |  | 
|  | #if defined(MBEDTLS_FS_IO) | 
|  | int mbedtls_entropy_write_seed_file(mbedtls_entropy_context *ctx, const char *path) | 
|  | { | 
|  | int ret = MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED; | 
|  | FILE *f = NULL; | 
|  | unsigned char buf[MBEDTLS_ENTROPY_BLOCK_SIZE]; | 
|  |  | 
|  | if ((ret = mbedtls_entropy_func(ctx, buf, MBEDTLS_ENTROPY_BLOCK_SIZE)) != 0) { | 
|  | ret = MBEDTLS_ERR_ENTROPY_SOURCE_FAILED; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if ((f = fopen(path, "wb")) == NULL) { | 
|  | ret = MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* Ensure no stdio buffering of secrets, as such buffers cannot be wiped. */ | 
|  | mbedtls_setbuf(f, NULL); | 
|  |  | 
|  | if (fwrite(buf, 1, MBEDTLS_ENTROPY_BLOCK_SIZE, f) != MBEDTLS_ENTROPY_BLOCK_SIZE) { | 
|  | ret = MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | ret = 0; | 
|  |  | 
|  | exit: | 
|  | mbedtls_platform_zeroize(buf, sizeof(buf)); | 
|  |  | 
|  | if (f != NULL) { | 
|  | fclose(f); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int mbedtls_entropy_update_seed_file(mbedtls_entropy_context *ctx, const char *path) | 
|  | { | 
|  | int ret = 0; | 
|  | FILE *f; | 
|  | size_t n; | 
|  | unsigned char buf[MBEDTLS_ENTROPY_MAX_SEED_SIZE]; | 
|  |  | 
|  | if ((f = fopen(path, "rb")) == NULL) { | 
|  | return MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR; | 
|  | } | 
|  |  | 
|  | /* Ensure no stdio buffering of secrets, as such buffers cannot be wiped. */ | 
|  | mbedtls_setbuf(f, NULL); | 
|  |  | 
|  | fseek(f, 0, SEEK_END); | 
|  | n = (size_t) ftell(f); | 
|  | fseek(f, 0, SEEK_SET); | 
|  |  | 
|  | if (n > MBEDTLS_ENTROPY_MAX_SEED_SIZE) { | 
|  | n = MBEDTLS_ENTROPY_MAX_SEED_SIZE; | 
|  | } | 
|  |  | 
|  | if (fread(buf, 1, n, f) != n) { | 
|  | ret = MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR; | 
|  | } else { | 
|  | ret = mbedtls_entropy_update_manual(ctx, buf, n); | 
|  | } | 
|  |  | 
|  | fclose(f); | 
|  |  | 
|  | mbedtls_platform_zeroize(buf, sizeof(buf)); | 
|  |  | 
|  | if (ret != 0) { | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return mbedtls_entropy_write_seed_file(ctx, path); | 
|  | } | 
|  | #endif /* MBEDTLS_FS_IO */ | 
|  |  | 
|  | #if defined(MBEDTLS_SELF_TEST) | 
|  | /* | 
|  | * Dummy source function | 
|  | */ | 
|  | static int entropy_dummy_source(void *data, unsigned char *output, | 
|  | size_t len, size_t *olen) | 
|  | { | 
|  | ((void) data); | 
|  |  | 
|  | memset(output, 0x2a, len); | 
|  | *olen = len; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #if defined(MBEDTLS_ENTROPY_HARDWARE_ALT) | 
|  |  | 
|  | static int mbedtls_entropy_source_self_test_gather(unsigned char *buf, size_t buf_len) | 
|  | { | 
|  | int ret = 0; | 
|  | size_t entropy_len = 0; | 
|  | size_t olen = 0; | 
|  | size_t attempts = buf_len; | 
|  |  | 
|  | while (attempts > 0 && entropy_len < buf_len) { | 
|  | if ((ret = mbedtls_hardware_poll(NULL, buf + entropy_len, | 
|  | buf_len - entropy_len, &olen)) != 0) { | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | entropy_len += olen; | 
|  | attempts--; | 
|  | } | 
|  |  | 
|  | if (entropy_len < buf_len) { | 
|  | ret = 1; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int mbedtls_entropy_source_self_test_check_bits(const unsigned char *buf, | 
|  | size_t buf_len) | 
|  | { | 
|  | unsigned char set = 0xFF; | 
|  | unsigned char unset = 0x00; | 
|  | size_t i; | 
|  |  | 
|  | for (i = 0; i < buf_len; i++) { | 
|  | set &= buf[i]; | 
|  | unset |= buf[i]; | 
|  | } | 
|  |  | 
|  | return set == 0xFF || unset == 0x00; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * A test to ensure that the entropy sources are functioning correctly | 
|  | * and there is no obvious failure. The test performs the following checks: | 
|  | *  - The entropy source is not providing only 0s (all bits unset) or 1s (all | 
|  | *    bits set). | 
|  | *  - The entropy source is not providing values in a pattern. Because the | 
|  | *    hardware could be providing data in an arbitrary length, this check polls | 
|  | *    the hardware entropy source twice and compares the result to ensure they | 
|  | *    are not equal. | 
|  | *  - The error code returned by the entropy source is not an error. | 
|  | */ | 
|  | int mbedtls_entropy_source_self_test(int verbose) | 
|  | { | 
|  | int ret = 0; | 
|  | unsigned char buf0[2 * sizeof(unsigned long long int)]; | 
|  | unsigned char buf1[2 * sizeof(unsigned long long int)]; | 
|  |  | 
|  | if (verbose != 0) { | 
|  | mbedtls_printf("  ENTROPY_BIAS test: "); | 
|  | } | 
|  |  | 
|  | memset(buf0, 0x00, sizeof(buf0)); | 
|  | memset(buf1, 0x00, sizeof(buf1)); | 
|  |  | 
|  | if ((ret = mbedtls_entropy_source_self_test_gather(buf0, sizeof(buf0))) != 0) { | 
|  | goto cleanup; | 
|  | } | 
|  | if ((ret = mbedtls_entropy_source_self_test_gather(buf1, sizeof(buf1))) != 0) { | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | /* Make sure that the returned values are not all 0 or 1 */ | 
|  | if ((ret = mbedtls_entropy_source_self_test_check_bits(buf0, sizeof(buf0))) != 0) { | 
|  | goto cleanup; | 
|  | } | 
|  | if ((ret = mbedtls_entropy_source_self_test_check_bits(buf1, sizeof(buf1))) != 0) { | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | /* Make sure that the entropy source is not returning values in a | 
|  | * pattern */ | 
|  | ret = memcmp(buf0, buf1, sizeof(buf0)) == 0; | 
|  |  | 
|  | cleanup: | 
|  | if (verbose != 0) { | 
|  | if (ret != 0) { | 
|  | mbedtls_printf("failed\n"); | 
|  | } else { | 
|  | mbedtls_printf("passed\n"); | 
|  | } | 
|  |  | 
|  | mbedtls_printf("\n"); | 
|  | } | 
|  |  | 
|  | return ret != 0; | 
|  | } | 
|  |  | 
|  | #endif /* MBEDTLS_ENTROPY_HARDWARE_ALT */ | 
|  |  | 
|  | /* | 
|  | * The actual entropy quality is hard to test, but we can at least | 
|  | * test that the functions don't cause errors and write the correct | 
|  | * amount of data to buffers. | 
|  | */ | 
|  | int mbedtls_entropy_self_test(int verbose) | 
|  | { | 
|  | int ret = 1; | 
|  | mbedtls_entropy_context ctx; | 
|  | unsigned char buf[MBEDTLS_ENTROPY_BLOCK_SIZE] = { 0 }; | 
|  | unsigned char acc[MBEDTLS_ENTROPY_BLOCK_SIZE] = { 0 }; | 
|  | size_t i, j; | 
|  |  | 
|  | if (verbose != 0) { | 
|  | mbedtls_printf("  ENTROPY test: "); | 
|  | } | 
|  |  | 
|  | mbedtls_entropy_init(&ctx); | 
|  |  | 
|  | /* First do a gather to make sure we have default sources */ | 
|  | if ((ret = mbedtls_entropy_gather(&ctx)) != 0) { | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | ret = mbedtls_entropy_add_source(&ctx, entropy_dummy_source, NULL, 16, | 
|  | MBEDTLS_ENTROPY_SOURCE_WEAK); | 
|  | if (ret != 0) { | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | if ((ret = mbedtls_entropy_update_manual(&ctx, buf, sizeof(buf))) != 0) { | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * To test that mbedtls_entropy_func writes correct number of bytes: | 
|  | * - use the whole buffer and rely on ASan to detect overruns | 
|  | * - collect entropy 8 times and OR the result in an accumulator: | 
|  | *   any byte should then be 0 with probably 2^(-64), so requiring | 
|  | *   each of the 32 or 64 bytes to be non-zero has a false failure rate | 
|  | *   of at most 2^(-58) which is acceptable. | 
|  | */ | 
|  | for (i = 0; i < 8; i++) { | 
|  | if ((ret = mbedtls_entropy_func(&ctx, buf, sizeof(buf))) != 0) { | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | for (j = 0; j < sizeof(buf); j++) { | 
|  | acc[j] |= buf[j]; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (j = 0; j < sizeof(buf); j++) { | 
|  | if (acc[j] == 0) { | 
|  | ret = 1; | 
|  | goto cleanup; | 
|  | } | 
|  | } | 
|  |  | 
|  | #if defined(MBEDTLS_ENTROPY_HARDWARE_ALT) | 
|  | if ((ret = mbedtls_entropy_source_self_test(0)) != 0) { | 
|  | goto cleanup; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | cleanup: | 
|  | mbedtls_entropy_free(&ctx); | 
|  |  | 
|  | if (verbose != 0) { | 
|  | if (ret != 0) { | 
|  | mbedtls_printf("failed\n"); | 
|  | } else { | 
|  | mbedtls_printf("passed\n"); | 
|  | } | 
|  |  | 
|  | mbedtls_printf("\n"); | 
|  | } | 
|  |  | 
|  | return ret != 0; | 
|  | } | 
|  | #endif /* MBEDTLS_SELF_TEST */ | 
|  |  | 
|  | #endif /* MBEDTLS_ENTROPY_C */ |