| /* |
| * Copyright (c) 1997, 2018, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| * |
| */ |
| |
| #include "precompiled.hpp" |
| #include "interp_masm_x86.hpp" |
| #include "interpreter/interpreter.hpp" |
| #include "interpreter/interpreterRuntime.hpp" |
| #include "oops/arrayOop.hpp" |
| #include "oops/markOop.hpp" |
| #include "oops/methodData.hpp" |
| #include "oops/method.hpp" |
| #include "prims/jvmtiExport.hpp" |
| #include "prims/jvmtiRedefineClassesTrace.hpp" |
| #include "prims/jvmtiThreadState.hpp" |
| #include "runtime/basicLock.hpp" |
| #include "runtime/biasedLocking.hpp" |
| #include "runtime/sharedRuntime.hpp" |
| #include "runtime/thread.inline.hpp" |
| |
| |
| // Implementation of InterpreterMacroAssembler |
| #ifdef CC_INTERP |
| void InterpreterMacroAssembler::get_method(Register reg) { |
| movptr(reg, Address(rbp, -(sizeof(BytecodeInterpreter) + 2 * wordSize))); |
| movptr(reg, Address(reg, byte_offset_of(BytecodeInterpreter, _method))); |
| } |
| #endif // CC_INTERP |
| |
| |
| #ifndef CC_INTERP |
| void InterpreterMacroAssembler::call_VM_leaf_base( |
| address entry_point, |
| int number_of_arguments |
| ) { |
| // interpreter specific |
| // |
| // Note: No need to save/restore bcp & locals (rsi & rdi) pointer |
| // since these are callee saved registers and no blocking/ |
| // GC can happen in leaf calls. |
| // Further Note: DO NOT save/restore bcp/locals. If a caller has |
| // already saved them so that it can use rsi/rdi as temporaries |
| // then a save/restore here will DESTROY the copy the caller |
| // saved! There used to be a save_bcp() that only happened in |
| // the ASSERT path (no restore_bcp). Which caused bizarre failures |
| // when jvm built with ASSERTs. |
| #ifdef ASSERT |
| { Label L; |
| cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD); |
| jcc(Assembler::equal, L); |
| stop("InterpreterMacroAssembler::call_VM_leaf_base: last_sp != NULL"); |
| bind(L); |
| } |
| #endif |
| // super call |
| MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments); |
| // interpreter specific |
| |
| // Used to ASSERT that rsi/rdi were equal to frame's bcp/locals |
| // but since they may not have been saved (and we don't want to |
| // save them here (see note above) the assert is invalid. |
| } |
| |
| |
| void InterpreterMacroAssembler::call_VM_base( |
| Register oop_result, |
| Register java_thread, |
| Register last_java_sp, |
| address entry_point, |
| int number_of_arguments, |
| bool check_exceptions |
| ) { |
| #ifdef ASSERT |
| { Label L; |
| cmpptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), (int32_t)NULL_WORD); |
| jcc(Assembler::equal, L); |
| stop("InterpreterMacroAssembler::call_VM_base: last_sp != NULL"); |
| bind(L); |
| } |
| #endif /* ASSERT */ |
| // interpreter specific |
| // |
| // Note: Could avoid restoring locals ptr (callee saved) - however doesn't |
| // really make a difference for these runtime calls, since they are |
| // slow anyway. Btw., bcp must be saved/restored since it may change |
| // due to GC. |
| assert(java_thread == noreg , "not expecting a precomputed java thread"); |
| save_bcp(); |
| // super call |
| MacroAssembler::call_VM_base(oop_result, java_thread, last_java_sp, entry_point, number_of_arguments, check_exceptions); |
| // interpreter specific |
| restore_bcp(); |
| restore_locals(); |
| } |
| |
| |
| void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) { |
| if (JvmtiExport::can_pop_frame()) { |
| Label L; |
| // Initiate popframe handling only if it is not already being processed. If the flag |
| // has the popframe_processing bit set, it means that this code is called *during* popframe |
| // handling - we don't want to reenter. |
| Register pop_cond = java_thread; // Not clear if any other register is available... |
| movl(pop_cond, Address(java_thread, JavaThread::popframe_condition_offset())); |
| testl(pop_cond, JavaThread::popframe_pending_bit); |
| jcc(Assembler::zero, L); |
| testl(pop_cond, JavaThread::popframe_processing_bit); |
| jcc(Assembler::notZero, L); |
| // Call Interpreter::remove_activation_preserving_args_entry() to get the |
| // address of the same-named entrypoint in the generated interpreter code. |
| call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry)); |
| jmp(rax); |
| bind(L); |
| get_thread(java_thread); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::load_earlyret_value(TosState state) { |
| get_thread(rcx); |
| movl(rcx, Address(rcx, JavaThread::jvmti_thread_state_offset())); |
| const Address tos_addr (rcx, JvmtiThreadState::earlyret_tos_offset()); |
| const Address oop_addr (rcx, JvmtiThreadState::earlyret_oop_offset()); |
| const Address val_addr (rcx, JvmtiThreadState::earlyret_value_offset()); |
| const Address val_addr1(rcx, JvmtiThreadState::earlyret_value_offset() |
| + in_ByteSize(wordSize)); |
| switch (state) { |
| case atos: movptr(rax, oop_addr); |
| movptr(oop_addr, NULL_WORD); |
| verify_oop(rax, state); break; |
| case ltos: |
| movl(rdx, val_addr1); // fall through |
| case btos: // fall through |
| case ztos: // fall through |
| case ctos: // fall through |
| case stos: // fall through |
| case itos: movl(rax, val_addr); break; |
| case ftos: fld_s(val_addr); break; |
| case dtos: fld_d(val_addr); break; |
| case vtos: /* nothing to do */ break; |
| default : ShouldNotReachHere(); |
| } |
| // Clean up tos value in the thread object |
| movl(tos_addr, (int32_t) ilgl); |
| movptr(val_addr, NULL_WORD); |
| NOT_LP64(movptr(val_addr1, NULL_WORD)); |
| } |
| |
| |
| void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) { |
| if (JvmtiExport::can_force_early_return()) { |
| Label L; |
| Register tmp = java_thread; |
| movptr(tmp, Address(tmp, JavaThread::jvmti_thread_state_offset())); |
| testptr(tmp, tmp); |
| jcc(Assembler::zero, L); // if (thread->jvmti_thread_state() == NULL) exit; |
| |
| // Initiate earlyret handling only if it is not already being processed. |
| // If the flag has the earlyret_processing bit set, it means that this code |
| // is called *during* earlyret handling - we don't want to reenter. |
| movl(tmp, Address(tmp, JvmtiThreadState::earlyret_state_offset())); |
| cmpl(tmp, JvmtiThreadState::earlyret_pending); |
| jcc(Assembler::notEqual, L); |
| |
| // Call Interpreter::remove_activation_early_entry() to get the address of the |
| // same-named entrypoint in the generated interpreter code. |
| get_thread(java_thread); |
| movptr(tmp, Address(java_thread, JavaThread::jvmti_thread_state_offset())); |
| pushl(Address(tmp, JvmtiThreadState::earlyret_tos_offset())); |
| call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), 1); |
| jmp(rax); |
| bind(L); |
| get_thread(java_thread); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp(Register reg, int bcp_offset) { |
| assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode"); |
| load_unsigned_short(reg, Address(rsi, bcp_offset)); |
| bswapl(reg); |
| shrl(reg, 16); |
| } |
| |
| |
| void InterpreterMacroAssembler::get_cache_index_at_bcp(Register reg, int bcp_offset, size_t index_size) { |
| assert(bcp_offset > 0, "bcp is still pointing to start of bytecode"); |
| if (index_size == sizeof(u2)) { |
| load_unsigned_short(reg, Address(rsi, bcp_offset)); |
| } else if (index_size == sizeof(u4)) { |
| assert(EnableInvokeDynamic, "giant index used only for JSR 292"); |
| movl(reg, Address(rsi, bcp_offset)); |
| // Check if the secondary index definition is still ~x, otherwise |
| // we have to change the following assembler code to calculate the |
| // plain index. |
| assert(ConstantPool::decode_invokedynamic_index(~123) == 123, "else change next line"); |
| notl(reg); // convert to plain index |
| } else if (index_size == sizeof(u1)) { |
| load_unsigned_byte(reg, Address(rsi, bcp_offset)); |
| } else { |
| ShouldNotReachHere(); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache, Register index, |
| int bcp_offset, size_t index_size) { |
| assert_different_registers(cache, index); |
| get_cache_index_at_bcp(index, bcp_offset, index_size); |
| movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize)); |
| assert(sizeof(ConstantPoolCacheEntry) == 4*wordSize, "adjust code below"); |
| assert(exact_log2(in_words(ConstantPoolCacheEntry::size())) == 2, "else change next line"); |
| shlptr(index, 2); // convert from field index to ConstantPoolCacheEntry index |
| } |
| |
| |
| void InterpreterMacroAssembler::get_cache_and_index_and_bytecode_at_bcp(Register cache, |
| Register index, |
| Register bytecode, |
| int byte_no, |
| int bcp_offset, |
| size_t index_size) { |
| get_cache_and_index_at_bcp(cache, index, bcp_offset, index_size); |
| movptr(bytecode, Address(cache, index, Address::times_ptr, ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::indices_offset())); |
| const int shift_count = (1 + byte_no) * BitsPerByte; |
| assert((byte_no == TemplateTable::f1_byte && shift_count == ConstantPoolCacheEntry::bytecode_1_shift) || |
| (byte_no == TemplateTable::f2_byte && shift_count == ConstantPoolCacheEntry::bytecode_2_shift), |
| "correct shift count"); |
| shrptr(bytecode, shift_count); |
| assert(ConstantPoolCacheEntry::bytecode_1_mask == ConstantPoolCacheEntry::bytecode_2_mask, "common mask"); |
| andptr(bytecode, ConstantPoolCacheEntry::bytecode_1_mask); |
| } |
| |
| |
| void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache, Register tmp, |
| int bcp_offset, size_t index_size) { |
| assert(cache != tmp, "must use different register"); |
| get_cache_index_at_bcp(tmp, bcp_offset, index_size); |
| assert(sizeof(ConstantPoolCacheEntry) == 4*wordSize, "adjust code below"); |
| // convert from field index to ConstantPoolCacheEntry index |
| // and from word offset to byte offset |
| assert(exact_log2(in_bytes(ConstantPoolCacheEntry::size_in_bytes())) == 2 + LogBytesPerWord, "else change next line"); |
| shll(tmp, 2 + LogBytesPerWord); |
| movptr(cache, Address(rbp, frame::interpreter_frame_cache_offset * wordSize)); |
| // skip past the header |
| addptr(cache, in_bytes(ConstantPoolCache::base_offset())); |
| addptr(cache, tmp); // construct pointer to cache entry |
| } |
| |
| void InterpreterMacroAssembler::get_method_counters(Register method, |
| Register mcs, Label& skip) { |
| Label has_counters; |
| movptr(mcs, Address(method, Method::method_counters_offset())); |
| testptr(mcs, mcs); |
| jcc(Assembler::notZero, has_counters); |
| call_VM(noreg, CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::build_method_counters), method); |
| movptr(mcs, Address(method,Method::method_counters_offset())); |
| testptr(mcs, mcs); |
| jcc(Assembler::zero, skip); // No MethodCounters allocated, OutOfMemory |
| bind(has_counters); |
| } |
| |
| // Load object from cpool->resolved_references(index) |
| void InterpreterMacroAssembler::load_resolved_reference_at_index( |
| Register result, Register index) { |
| assert_different_registers(result, index); |
| // convert from field index to resolved_references() index and from |
| // word index to byte offset. Since this is a java object, it can be compressed |
| Register tmp = index; // reuse |
| shll(tmp, LogBytesPerHeapOop); |
| |
| get_constant_pool(result); |
| // load pointer for resolved_references[] objArray |
| movptr(result, Address(result, ConstantPool::resolved_references_offset_in_bytes())); |
| // JNIHandles::resolve(obj); |
| movptr(result, Address(result, 0)); |
| // Add in the index |
| addptr(result, tmp); |
| load_heap_oop(result, Address(result, arrayOopDesc::base_offset_in_bytes(T_OBJECT))); |
| } |
| |
| // Generate a subtype check: branch to ok_is_subtype if sub_klass is |
| // a subtype of super_klass. EAX holds the super_klass. Blows ECX. |
| // Resets EDI to locals. Register sub_klass cannot be any of the above. |
| void InterpreterMacroAssembler::gen_subtype_check( Register Rsub_klass, Label &ok_is_subtype ) { |
| assert( Rsub_klass != rax, "rax, holds superklass" ); |
| assert( Rsub_klass != rcx, "used as a temp" ); |
| assert( Rsub_klass != rdi, "used as a temp, restored from locals" ); |
| |
| // Profile the not-null value's klass. |
| profile_typecheck(rcx, Rsub_klass, rdi); // blows rcx, reloads rdi |
| |
| // Do the check. |
| check_klass_subtype(Rsub_klass, rax, rcx, ok_is_subtype); // blows rcx |
| |
| // Profile the failure of the check. |
| profile_typecheck_failed(rcx); // blows rcx |
| } |
| |
| void InterpreterMacroAssembler::f2ieee() { |
| if (IEEEPrecision) { |
| fstp_s(Address(rsp, 0)); |
| fld_s(Address(rsp, 0)); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::d2ieee() { |
| if (IEEEPrecision) { |
| fstp_d(Address(rsp, 0)); |
| fld_d(Address(rsp, 0)); |
| } |
| } |
| |
| // Java Expression Stack |
| |
| void InterpreterMacroAssembler::pop_ptr(Register r) { |
| pop(r); |
| } |
| |
| void InterpreterMacroAssembler::pop_i(Register r) { |
| pop(r); |
| } |
| |
| void InterpreterMacroAssembler::pop_l(Register lo, Register hi) { |
| pop(lo); |
| pop(hi); |
| } |
| |
| void InterpreterMacroAssembler::pop_f() { |
| fld_s(Address(rsp, 0)); |
| addptr(rsp, 1 * wordSize); |
| } |
| |
| void InterpreterMacroAssembler::pop_d() { |
| fld_d(Address(rsp, 0)); |
| addptr(rsp, 2 * wordSize); |
| } |
| |
| |
| void InterpreterMacroAssembler::pop(TosState state) { |
| switch (state) { |
| case atos: pop_ptr(rax); break; |
| case btos: // fall through |
| case ztos: // fall through |
| case ctos: // fall through |
| case stos: // fall through |
| case itos: pop_i(rax); break; |
| case ltos: pop_l(rax, rdx); break; |
| case ftos: pop_f(); break; |
| case dtos: pop_d(); break; |
| case vtos: /* nothing to do */ break; |
| default : ShouldNotReachHere(); |
| } |
| verify_oop(rax, state); |
| } |
| |
| void InterpreterMacroAssembler::push_ptr(Register r) { |
| push(r); |
| } |
| |
| void InterpreterMacroAssembler::push_i(Register r) { |
| push(r); |
| } |
| |
| void InterpreterMacroAssembler::push_l(Register lo, Register hi) { |
| push(hi); |
| push(lo); |
| } |
| |
| void InterpreterMacroAssembler::push_f() { |
| // Do not schedule for no AGI! Never write beyond rsp! |
| subptr(rsp, 1 * wordSize); |
| fstp_s(Address(rsp, 0)); |
| } |
| |
| void InterpreterMacroAssembler::push_d(Register r) { |
| // Do not schedule for no AGI! Never write beyond rsp! |
| subptr(rsp, 2 * wordSize); |
| fstp_d(Address(rsp, 0)); |
| } |
| |
| |
| void InterpreterMacroAssembler::push(TosState state) { |
| verify_oop(rax, state); |
| switch (state) { |
| case atos: push_ptr(rax); break; |
| case btos: // fall through |
| case ztos: // fall through |
| case ctos: // fall through |
| case stos: // fall through |
| case itos: push_i(rax); break; |
| case ltos: push_l(rax, rdx); break; |
| case ftos: push_f(); break; |
| case dtos: push_d(rax); break; |
| case vtos: /* nothing to do */ break; |
| default : ShouldNotReachHere(); |
| } |
| } |
| |
| |
| // Helpers for swap and dup |
| void InterpreterMacroAssembler::load_ptr(int n, Register val) { |
| movptr(val, Address(rsp, Interpreter::expr_offset_in_bytes(n))); |
| } |
| |
| void InterpreterMacroAssembler::store_ptr(int n, Register val) { |
| movptr(Address(rsp, Interpreter::expr_offset_in_bytes(n)), val); |
| } |
| |
| void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() { |
| // set sender sp |
| lea(rsi, Address(rsp, wordSize)); |
| // record last_sp |
| movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), rsi); |
| } |
| |
| |
| // Jump to from_interpreted entry of a call unless single stepping is possible |
| // in this thread in which case we must call the i2i entry |
| void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) { |
| prepare_to_jump_from_interpreted(); |
| |
| if (JvmtiExport::can_post_interpreter_events()) { |
| Label run_compiled_code; |
| // JVMTI events, such as single-stepping, are implemented partly by avoiding running |
| // compiled code in threads for which the event is enabled. Check here for |
| // interp_only_mode if these events CAN be enabled. |
| get_thread(temp); |
| // interp_only is an int, on little endian it is sufficient to test the byte only |
| // Is a cmpl faster? |
| cmpb(Address(temp, JavaThread::interp_only_mode_offset()), 0); |
| jccb(Assembler::zero, run_compiled_code); |
| jmp(Address(method, Method::interpreter_entry_offset())); |
| bind(run_compiled_code); |
| } |
| |
| jmp(Address(method, Method::from_interpreted_offset())); |
| |
| } |
| |
| |
| // The following two routines provide a hook so that an implementation |
| // can schedule the dispatch in two parts. Intel does not do this. |
| void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) { |
| // Nothing Intel-specific to be done here. |
| } |
| |
| void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) { |
| dispatch_next(state, step); |
| } |
| |
| void InterpreterMacroAssembler::dispatch_base(TosState state, address* table, |
| bool verifyoop) { |
| verify_FPU(1, state); |
| if (VerifyActivationFrameSize) { |
| Label L; |
| mov(rcx, rbp); |
| subptr(rcx, rsp); |
| int min_frame_size = (frame::link_offset - frame::interpreter_frame_initial_sp_offset) * wordSize; |
| cmpptr(rcx, min_frame_size); |
| jcc(Assembler::greaterEqual, L); |
| stop("broken stack frame"); |
| bind(L); |
| } |
| if (verifyoop) verify_oop(rax, state); |
| Address index(noreg, rbx, Address::times_ptr); |
| ExternalAddress tbl((address)table); |
| ArrayAddress dispatch(tbl, index); |
| jump(dispatch); |
| } |
| |
| |
| void InterpreterMacroAssembler::dispatch_only(TosState state) { |
| dispatch_base(state, Interpreter::dispatch_table(state)); |
| } |
| |
| |
| void InterpreterMacroAssembler::dispatch_only_normal(TosState state) { |
| dispatch_base(state, Interpreter::normal_table(state)); |
| } |
| |
| void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) { |
| dispatch_base(state, Interpreter::normal_table(state), false); |
| } |
| |
| |
| void InterpreterMacroAssembler::dispatch_next(TosState state, int step) { |
| // load next bytecode (load before advancing rsi to prevent AGI) |
| load_unsigned_byte(rbx, Address(rsi, step)); |
| // advance rsi |
| increment(rsi, step); |
| dispatch_base(state, Interpreter::dispatch_table(state)); |
| } |
| |
| |
| void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) { |
| // load current bytecode |
| load_unsigned_byte(rbx, Address(rsi, 0)); |
| dispatch_base(state, table); |
| } |
| |
| // remove activation |
| // |
| // Unlock the receiver if this is a synchronized method. |
| // Unlock any Java monitors from syncronized blocks. |
| // Remove the activation from the stack. |
| // |
| // If there are locked Java monitors |
| // If throw_monitor_exception |
| // throws IllegalMonitorStateException |
| // Else if install_monitor_exception |
| // installs IllegalMonitorStateException |
| // Else |
| // no error processing |
| void InterpreterMacroAssembler::remove_activation(TosState state, Register ret_addr, |
| bool throw_monitor_exception, |
| bool install_monitor_exception, |
| bool notify_jvmdi) { |
| // Note: Registers rax, rdx and FPU ST(0) may be in use for the result |
| // check if synchronized method |
| Label unlocked, unlock, no_unlock; |
| |
| get_thread(rcx); |
| const Address do_not_unlock_if_synchronized(rcx, |
| in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); |
| |
| movbool(rbx, do_not_unlock_if_synchronized); |
| mov(rdi,rbx); |
| movbool(do_not_unlock_if_synchronized, false); // reset the flag |
| |
| movptr(rbx, Address(rbp, frame::interpreter_frame_method_offset * wordSize)); // get method access flags |
| movl(rcx, Address(rbx, Method::access_flags_offset())); |
| |
| testl(rcx, JVM_ACC_SYNCHRONIZED); |
| jcc(Assembler::zero, unlocked); |
| |
| // Don't unlock anything if the _do_not_unlock_if_synchronized flag |
| // is set. |
| mov(rcx,rdi); |
| testbool(rcx); |
| jcc(Assembler::notZero, no_unlock); |
| |
| // unlock monitor |
| push(state); // save result |
| |
| // BasicObjectLock will be first in list, since this is a synchronized method. However, need |
| // to check that the object has not been unlocked by an explicit monitorexit bytecode. |
| const Address monitor(rbp, frame::interpreter_frame_initial_sp_offset * wordSize - (int)sizeof(BasicObjectLock)); |
| lea (rdx, monitor); // address of first monitor |
| |
| movptr (rax, Address(rdx, BasicObjectLock::obj_offset_in_bytes())); |
| testptr(rax, rax); |
| jcc (Assembler::notZero, unlock); |
| |
| pop(state); |
| if (throw_monitor_exception) { |
| empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow |
| |
| // Entry already unlocked, need to throw exception |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception)); |
| should_not_reach_here(); |
| } else { |
| // Monitor already unlocked during a stack unroll. |
| // If requested, install an illegal_monitor_state_exception. |
| // Continue with stack unrolling. |
| if (install_monitor_exception) { |
| empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception)); |
| } |
| jmp(unlocked); |
| } |
| |
| bind(unlock); |
| unlock_object(rdx); |
| pop(state); |
| |
| // Check that for block-structured locking (i.e., that all locked objects has been unlocked) |
| bind(unlocked); |
| |
| // rax, rdx: Might contain return value |
| |
| // Check that all monitors are unlocked |
| { |
| Label loop, exception, entry, restart; |
| const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; |
| const Address monitor_block_top(rbp, frame::interpreter_frame_monitor_block_top_offset * wordSize); |
| const Address monitor_block_bot(rbp, frame::interpreter_frame_initial_sp_offset * wordSize); |
| |
| bind(restart); |
| movptr(rcx, monitor_block_top); // points to current entry, starting with top-most entry |
| lea(rbx, monitor_block_bot); // points to word before bottom of monitor block |
| jmp(entry); |
| |
| // Entry already locked, need to throw exception |
| bind(exception); |
| |
| if (throw_monitor_exception) { |
| empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow |
| |
| // Throw exception |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception)); |
| should_not_reach_here(); |
| } else { |
| // Stack unrolling. Unlock object and install illegal_monitor_exception |
| // Unlock does not block, so don't have to worry about the frame |
| |
| push(state); |
| mov(rdx, rcx); |
| unlock_object(rdx); |
| pop(state); |
| |
| if (install_monitor_exception) { |
| empty_FPU_stack(); // remove possible return value from FPU-stack, otherwise stack could overflow |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception)); |
| } |
| |
| jmp(restart); |
| } |
| |
| bind(loop); |
| cmpptr(Address(rcx, BasicObjectLock::obj_offset_in_bytes()), (int32_t)NULL_WORD); // check if current entry is used |
| jcc(Assembler::notEqual, exception); |
| |
| addptr(rcx, entry_size); // otherwise advance to next entry |
| bind(entry); |
| cmpptr(rcx, rbx); // check if bottom reached |
| jcc(Assembler::notEqual, loop); // if not at bottom then check this entry |
| } |
| |
| bind(no_unlock); |
| |
| // jvmti support |
| if (notify_jvmdi) { |
| notify_method_exit(state, NotifyJVMTI); // preserve TOSCA |
| } else { |
| notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA |
| } |
| |
| // remove activation |
| movptr(rbx, Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize)); // get sender sp |
| leave(); // remove frame anchor |
| pop(ret_addr); // get return address |
| mov(rsp, rbx); // set sp to sender sp |
| if (UseSSE) { |
| // float and double are returned in xmm register in SSE-mode |
| if (state == ftos && UseSSE >= 1) { |
| subptr(rsp, wordSize); |
| fstp_s(Address(rsp, 0)); |
| movflt(xmm0, Address(rsp, 0)); |
| addptr(rsp, wordSize); |
| } else if (state == dtos && UseSSE >= 2) { |
| subptr(rsp, 2*wordSize); |
| fstp_d(Address(rsp, 0)); |
| movdbl(xmm0, Address(rsp, 0)); |
| addptr(rsp, 2*wordSize); |
| } |
| } |
| } |
| |
| #endif /* !CC_INTERP */ |
| |
| |
| // Lock object |
| // |
| // Argument: rdx : Points to BasicObjectLock to be used for locking. Must |
| // be initialized with object to lock |
| void InterpreterMacroAssembler::lock_object(Register lock_reg) { |
| assert(lock_reg == rdx, "The argument is only for looks. It must be rdx"); |
| |
| if (UseHeavyMonitors) { |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), lock_reg); |
| } else { |
| |
| Label done; |
| |
| const Register swap_reg = rax; // Must use rax, for cmpxchg instruction |
| const Register obj_reg = rcx; // Will contain the oop |
| |
| const int obj_offset = BasicObjectLock::obj_offset_in_bytes(); |
| const int lock_offset = BasicObjectLock::lock_offset_in_bytes (); |
| const int mark_offset = lock_offset + BasicLock::displaced_header_offset_in_bytes(); |
| |
| Label slow_case; |
| |
| // Load object pointer into obj_reg %rcx |
| movptr(obj_reg, Address(lock_reg, obj_offset)); |
| |
| if (UseBiasedLocking) { |
| // Note: we use noreg for the temporary register since it's hard |
| // to come up with a free register on all incoming code paths |
| biased_locking_enter(lock_reg, obj_reg, swap_reg, noreg, false, done, &slow_case); |
| } |
| |
| // Load immediate 1 into swap_reg %rax, |
| movptr(swap_reg, (int32_t)1); |
| |
| // Load (object->mark() | 1) into swap_reg %rax, |
| orptr(swap_reg, Address(obj_reg, 0)); |
| |
| // Save (object->mark() | 1) into BasicLock's displaced header |
| movptr(Address(lock_reg, mark_offset), swap_reg); |
| |
| assert(lock_offset == 0, "displached header must be first word in BasicObjectLock"); |
| if (os::is_MP()) { |
| lock(); |
| } |
| cmpxchgptr(lock_reg, Address(obj_reg, 0)); |
| if (PrintBiasedLockingStatistics) { |
| cond_inc32(Assembler::zero, |
| ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr())); |
| } |
| jcc(Assembler::zero, done); |
| |
| // Test if the oopMark is an obvious stack pointer, i.e., |
| // 1) (mark & 3) == 0, and |
| // 2) rsp <= mark < mark + os::pagesize() |
| // |
| // These 3 tests can be done by evaluating the following |
| // expression: ((mark - rsp) & (3 - os::vm_page_size())), |
| // assuming both stack pointer and pagesize have their |
| // least significant 2 bits clear. |
| // NOTE: the oopMark is in swap_reg %rax, as the result of cmpxchg |
| subptr(swap_reg, rsp); |
| andptr(swap_reg, 3 - os::vm_page_size()); |
| |
| // Save the test result, for recursive case, the result is zero |
| movptr(Address(lock_reg, mark_offset), swap_reg); |
| |
| if (PrintBiasedLockingStatistics) { |
| cond_inc32(Assembler::zero, |
| ExternalAddress((address) BiasedLocking::fast_path_entry_count_addr())); |
| } |
| jcc(Assembler::zero, done); |
| |
| bind(slow_case); |
| |
| // Call the runtime routine for slow case |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), lock_reg); |
| |
| bind(done); |
| } |
| } |
| |
| |
| // Unlocks an object. Used in monitorexit bytecode and remove_activation. |
| // |
| // Argument: rdx : Points to BasicObjectLock structure for lock |
| // Throw an IllegalMonitorException if object is not locked by current thread |
| // |
| // Uses: rax, rbx, rcx, rdx |
| void InterpreterMacroAssembler::unlock_object(Register lock_reg) { |
| assert(lock_reg == rdx, "The argument is only for looks. It must be rdx"); |
| |
| if (UseHeavyMonitors) { |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg); |
| } else { |
| Label done; |
| |
| const Register swap_reg = rax; // Must use rax, for cmpxchg instruction |
| const Register header_reg = rbx; // Will contain the old oopMark |
| const Register obj_reg = rcx; // Will contain the oop |
| |
| save_bcp(); // Save in case of exception |
| |
| // Convert from BasicObjectLock structure to object and BasicLock structure |
| // Store the BasicLock address into %rax, |
| lea(swap_reg, Address(lock_reg, BasicObjectLock::lock_offset_in_bytes())); |
| |
| // Load oop into obj_reg(%rcx) |
| movptr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset_in_bytes ())); |
| |
| // Free entry |
| movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), NULL_WORD); |
| |
| if (UseBiasedLocking) { |
| biased_locking_exit(obj_reg, header_reg, done); |
| } |
| |
| // Load the old header from BasicLock structure |
| movptr(header_reg, Address(swap_reg, BasicLock::displaced_header_offset_in_bytes())); |
| |
| // Test for recursion |
| testptr(header_reg, header_reg); |
| |
| // zero for recursive case |
| jcc(Assembler::zero, done); |
| |
| // Atomic swap back the old header |
| if (os::is_MP()) lock(); |
| cmpxchgptr(header_reg, Address(obj_reg, 0)); |
| |
| // zero for recursive case |
| jcc(Assembler::zero, done); |
| |
| // Call the runtime routine for slow case. |
| movptr(Address(lock_reg, BasicObjectLock::obj_offset_in_bytes()), obj_reg); // restore obj |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg); |
| |
| bind(done); |
| |
| restore_bcp(); |
| } |
| } |
| |
| |
| #ifndef CC_INTERP |
| |
| // Test ImethodDataPtr. If it is null, continue at the specified label |
| void InterpreterMacroAssembler::test_method_data_pointer(Register mdp, Label& zero_continue) { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| movptr(mdp, Address(rbp, frame::interpreter_frame_mdx_offset * wordSize)); |
| testptr(mdp, mdp); |
| jcc(Assembler::zero, zero_continue); |
| } |
| |
| |
| // Set the method data pointer for the current bcp. |
| void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| Label set_mdp; |
| push(rax); |
| push(rbx); |
| |
| get_method(rbx); |
| // Test MDO to avoid the call if it is NULL. |
| movptr(rax, Address(rbx, in_bytes(Method::method_data_offset()))); |
| testptr(rax, rax); |
| jcc(Assembler::zero, set_mdp); |
| // rbx,: method |
| // rsi: bcp |
| call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rbx, rsi); |
| // rax,: mdi |
| // mdo is guaranteed to be non-zero here, we checked for it before the call. |
| movptr(rbx, Address(rbx, in_bytes(Method::method_data_offset()))); |
| addptr(rbx, in_bytes(MethodData::data_offset())); |
| addptr(rax, rbx); |
| bind(set_mdp); |
| movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), rax); |
| pop(rbx); |
| pop(rax); |
| } |
| |
| void InterpreterMacroAssembler::verify_method_data_pointer() { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| #ifdef ASSERT |
| Label verify_continue; |
| push(rax); |
| push(rbx); |
| push(rcx); |
| push(rdx); |
| test_method_data_pointer(rcx, verify_continue); // If mdp is zero, continue |
| get_method(rbx); |
| |
| // If the mdp is valid, it will point to a DataLayout header which is |
| // consistent with the bcp. The converse is highly probable also. |
| load_unsigned_short(rdx, Address(rcx, in_bytes(DataLayout::bci_offset()))); |
| addptr(rdx, Address(rbx, Method::const_offset())); |
| lea(rdx, Address(rdx, ConstMethod::codes_offset())); |
| cmpptr(rdx, rsi); |
| jcc(Assembler::equal, verify_continue); |
| // rbx,: method |
| // rsi: bcp |
| // rcx: mdp |
| call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp), rbx, rsi, rcx); |
| bind(verify_continue); |
| pop(rdx); |
| pop(rcx); |
| pop(rbx); |
| pop(rax); |
| #endif // ASSERT |
| } |
| |
| |
| void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in, int constant, Register value) { |
| // %%% this seems to be used to store counter data which is surely 32bits |
| // however 64bit side stores 64 bits which seems wrong |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| Address data(mdp_in, constant); |
| movptr(data, value); |
| } |
| |
| |
| void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, |
| int constant, |
| bool decrement) { |
| // Counter address |
| Address data(mdp_in, constant); |
| |
| increment_mdp_data_at(data, decrement); |
| } |
| |
| |
| void InterpreterMacroAssembler::increment_mdp_data_at(Address data, |
| bool decrement) { |
| |
| assert( DataLayout::counter_increment==1, "flow-free idiom only works with 1" ); |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| |
| // %%% 64bit treats this as 64 bit which seems unlikely |
| if (decrement) { |
| // Decrement the register. Set condition codes. |
| addl(data, -DataLayout::counter_increment); |
| // If the decrement causes the counter to overflow, stay negative |
| Label L; |
| jcc(Assembler::negative, L); |
| addl(data, DataLayout::counter_increment); |
| bind(L); |
| } else { |
| assert(DataLayout::counter_increment == 1, |
| "flow-free idiom only works with 1"); |
| // Increment the register. Set carry flag. |
| addl(data, DataLayout::counter_increment); |
| // If the increment causes the counter to overflow, pull back by 1. |
| sbbl(data, 0); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, |
| Register reg, |
| int constant, |
| bool decrement) { |
| Address data(mdp_in, reg, Address::times_1, constant); |
| |
| increment_mdp_data_at(data, decrement); |
| } |
| |
| |
| void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in, int flag_byte_constant) { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| int header_offset = in_bytes(DataLayout::header_offset()); |
| int header_bits = DataLayout::flag_mask_to_header_mask(flag_byte_constant); |
| // Set the flag |
| orl(Address(mdp_in, header_offset), header_bits); |
| } |
| |
| |
| |
| void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in, |
| int offset, |
| Register value, |
| Register test_value_out, |
| Label& not_equal_continue) { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| if (test_value_out == noreg) { |
| cmpptr(value, Address(mdp_in, offset)); |
| } else { |
| // Put the test value into a register, so caller can use it: |
| movptr(test_value_out, Address(mdp_in, offset)); |
| cmpptr(test_value_out, value); |
| } |
| jcc(Assembler::notEqual, not_equal_continue); |
| } |
| |
| |
| void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, int offset_of_disp) { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| Address disp_address(mdp_in, offset_of_disp); |
| addptr(mdp_in,disp_address); |
| movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in); |
| } |
| |
| |
| void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, Register reg, int offset_of_disp) { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| Address disp_address(mdp_in, reg, Address::times_1, offset_of_disp); |
| addptr(mdp_in, disp_address); |
| movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in); |
| } |
| |
| |
| void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in, int constant) { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| addptr(mdp_in, constant); |
| movptr(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), mdp_in); |
| } |
| |
| |
| void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| push(return_bci); // save/restore across call_VM |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret), return_bci); |
| pop(return_bci); |
| } |
| |
| |
| void InterpreterMacroAssembler::profile_taken_branch(Register mdp, Register bumped_count) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| // Otherwise, assign to mdp |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // We are taking a branch. Increment the taken count. |
| // We inline increment_mdp_data_at to return bumped_count in a register |
| //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset())); |
| Address data(mdp, in_bytes(JumpData::taken_offset())); |
| |
| // %%% 64bit treats these cells as 64 bit but they seem to be 32 bit |
| movl(bumped_count,data); |
| assert( DataLayout::counter_increment==1, "flow-free idiom only works with 1" ); |
| addl(bumped_count, DataLayout::counter_increment); |
| sbbl(bumped_count, 0); |
| movl(data,bumped_count); // Store back out |
| |
| // The method data pointer needs to be updated to reflect the new target. |
| update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset())); |
| bind (profile_continue); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // We are taking a branch. Increment the not taken count. |
| increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset())); |
| |
| // The method data pointer needs to be updated to correspond to the next bytecode |
| update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size())); |
| bind (profile_continue); |
| } |
| } |
| |
| void InterpreterMacroAssembler::profile_call(Register mdp) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // We are making a call. Increment the count. |
| increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); |
| |
| // The method data pointer needs to be updated to reflect the new target. |
| update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size())); |
| bind (profile_continue); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::profile_final_call(Register mdp) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // We are making a call. Increment the count. |
| increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); |
| |
| // The method data pointer needs to be updated to reflect the new target. |
| update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size())); |
| bind (profile_continue); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::profile_virtual_call(Register receiver, Register mdp, |
| Register reg2, |
| bool receiver_can_be_null) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| Label skip_receiver_profile; |
| if (receiver_can_be_null) { |
| Label not_null; |
| testptr(receiver, receiver); |
| jccb(Assembler::notZero, not_null); |
| // We are making a call. Increment the count for null receiver. |
| increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); |
| jmp(skip_receiver_profile); |
| bind(not_null); |
| } |
| |
| // Record the receiver type. |
| record_klass_in_profile(receiver, mdp, reg2, true); |
| bind(skip_receiver_profile); |
| |
| // The method data pointer needs to be updated to reflect the new target. |
| update_mdp_by_constant(mdp, |
| in_bytes(VirtualCallData:: |
| virtual_call_data_size())); |
| bind(profile_continue); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::record_klass_in_profile_helper( |
| Register receiver, Register mdp, |
| Register reg2, int start_row, |
| Label& done, bool is_virtual_call) { |
| if (TypeProfileWidth == 0) { |
| if (is_virtual_call) { |
| increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); |
| } |
| return; |
| } |
| |
| int last_row = VirtualCallData::row_limit() - 1; |
| assert(start_row <= last_row, "must be work left to do"); |
| // Test this row for both the receiver and for null. |
| // Take any of three different outcomes: |
| // 1. found receiver => increment count and goto done |
| // 2. found null => keep looking for case 1, maybe allocate this cell |
| // 3. found something else => keep looking for cases 1 and 2 |
| // Case 3 is handled by a recursive call. |
| for (int row = start_row; row <= last_row; row++) { |
| Label next_test; |
| bool test_for_null_also = (row == start_row); |
| |
| // See if the receiver is receiver[n]. |
| int recvr_offset = in_bytes(VirtualCallData::receiver_offset(row)); |
| test_mdp_data_at(mdp, recvr_offset, receiver, |
| (test_for_null_also ? reg2 : noreg), |
| next_test); |
| // (Reg2 now contains the receiver from the CallData.) |
| |
| // The receiver is receiver[n]. Increment count[n]. |
| int count_offset = in_bytes(VirtualCallData::receiver_count_offset(row)); |
| increment_mdp_data_at(mdp, count_offset); |
| jmp(done); |
| bind(next_test); |
| |
| if (row == start_row) { |
| Label found_null; |
| // Failed the equality check on receiver[n]... Test for null. |
| testptr(reg2, reg2); |
| if (start_row == last_row) { |
| // The only thing left to do is handle the null case. |
| if (is_virtual_call) { |
| jccb(Assembler::zero, found_null); |
| // Receiver did not match any saved receiver and there is no empty row for it. |
| // Increment total counter to indicate polymorphic case. |
| increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); |
| jmp(done); |
| bind(found_null); |
| } else { |
| jcc(Assembler::notZero, done); |
| } |
| break; |
| } |
| // Since null is rare, make it be the branch-taken case. |
| jcc(Assembler::zero, found_null); |
| |
| // Put all the "Case 3" tests here. |
| record_klass_in_profile_helper(receiver, mdp, reg2, start_row + 1, done, is_virtual_call); |
| |
| // Found a null. Keep searching for a matching receiver, |
| // but remember that this is an empty (unused) slot. |
| bind(found_null); |
| } |
| } |
| |
| // In the fall-through case, we found no matching receiver, but we |
| // observed the receiver[start_row] is NULL. |
| |
| // Fill in the receiver field and increment the count. |
| int recvr_offset = in_bytes(VirtualCallData::receiver_offset(start_row)); |
| set_mdp_data_at(mdp, recvr_offset, receiver); |
| int count_offset = in_bytes(VirtualCallData::receiver_count_offset(start_row)); |
| movptr(reg2, (intptr_t)DataLayout::counter_increment); |
| set_mdp_data_at(mdp, count_offset, reg2); |
| if (start_row > 0) { |
| jmp(done); |
| } |
| } |
| |
| void InterpreterMacroAssembler::record_klass_in_profile(Register receiver, |
| Register mdp, Register reg2, |
| bool is_virtual_call) { |
| assert(ProfileInterpreter, "must be profiling"); |
| Label done; |
| |
| record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call); |
| |
| bind (done); |
| } |
| |
| void InterpreterMacroAssembler::profile_ret(Register return_bci, Register mdp) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| uint row; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // Update the total ret count. |
| increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); |
| |
| for (row = 0; row < RetData::row_limit(); row++) { |
| Label next_test; |
| |
| // See if return_bci is equal to bci[n]: |
| test_mdp_data_at(mdp, in_bytes(RetData::bci_offset(row)), return_bci, |
| noreg, next_test); |
| |
| // return_bci is equal to bci[n]. Increment the count. |
| increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row))); |
| |
| // The method data pointer needs to be updated to reflect the new target. |
| update_mdp_by_offset(mdp, in_bytes(RetData::bci_displacement_offset(row))); |
| jmp(profile_continue); |
| bind(next_test); |
| } |
| |
| update_mdp_for_ret(return_bci); |
| |
| bind (profile_continue); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::profile_null_seen(Register mdp) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| set_mdp_flag_at(mdp, BitData::null_seen_byte_constant()); |
| |
| // The method data pointer needs to be updated. |
| int mdp_delta = in_bytes(BitData::bit_data_size()); |
| if (TypeProfileCasts) { |
| mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); |
| } |
| update_mdp_by_constant(mdp, mdp_delta); |
| |
| bind (profile_continue); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp) { |
| if (ProfileInterpreter && TypeProfileCasts) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| int count_offset = in_bytes(CounterData::count_offset()); |
| // Back up the address, since we have already bumped the mdp. |
| count_offset -= in_bytes(VirtualCallData::virtual_call_data_size()); |
| |
| // *Decrement* the counter. We expect to see zero or small negatives. |
| increment_mdp_data_at(mdp, count_offset, true); |
| |
| bind (profile_continue); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2) |
| { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // The method data pointer needs to be updated. |
| int mdp_delta = in_bytes(BitData::bit_data_size()); |
| if (TypeProfileCasts) { |
| mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); |
| |
| // Record the object type. |
| record_klass_in_profile(klass, mdp, reg2, false); |
| assert(reg2 == rdi, "we know how to fix this blown reg"); |
| restore_locals(); // Restore EDI |
| } |
| update_mdp_by_constant(mdp, mdp_delta); |
| |
| bind(profile_continue); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::profile_switch_default(Register mdp) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // Update the default case count |
| increment_mdp_data_at(mdp, in_bytes(MultiBranchData::default_count_offset())); |
| |
| // The method data pointer needs to be updated. |
| update_mdp_by_offset(mdp, in_bytes(MultiBranchData::default_displacement_offset())); |
| |
| bind (profile_continue); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::profile_switch_case(Register index, Register mdp, Register reg2) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // Build the base (index * per_case_size_in_bytes()) + case_array_offset_in_bytes() |
| movptr(reg2, (intptr_t)in_bytes(MultiBranchData::per_case_size())); |
| // index is positive and so should have correct value if this code were |
| // used on 64bits |
| imulptr(index, reg2); |
| addptr(index, in_bytes(MultiBranchData::case_array_offset())); |
| |
| // Update the case count |
| increment_mdp_data_at(mdp, index, in_bytes(MultiBranchData::relative_count_offset())); |
| |
| // The method data pointer needs to be updated. |
| update_mdp_by_offset(mdp, index, in_bytes(MultiBranchData::relative_displacement_offset())); |
| |
| bind (profile_continue); |
| } |
| } |
| |
| #endif // !CC_INTERP |
| |
| |
| |
| void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) { |
| if (state == atos) MacroAssembler::verify_oop(reg); |
| } |
| |
| |
| #ifndef CC_INTERP |
| void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) { |
| if (state == ftos || state == dtos) MacroAssembler::verify_FPU(stack_depth); |
| } |
| |
| #endif /* CC_INTERP */ |
| |
| |
| void InterpreterMacroAssembler::notify_method_entry() { |
| // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to |
| // track stack depth. If it is possible to enter interp_only_mode we add |
| // the code to check if the event should be sent. |
| if (JvmtiExport::can_post_interpreter_events()) { |
| Label L; |
| get_thread(rcx); |
| movl(rcx, Address(rcx, JavaThread::interp_only_mode_offset())); |
| testl(rcx,rcx); |
| jcc(Assembler::zero, L); |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_entry)); |
| bind(L); |
| } |
| |
| { |
| SkipIfEqual skip_if(this, &DTraceMethodProbes, 0); |
| get_thread(rcx); |
| get_method(rbx); |
| call_VM_leaf( |
| CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry), rcx, rbx); |
| } |
| |
| // RedefineClasses() tracing support for obsolete method entry |
| if (RC_TRACE_IN_RANGE(0x00001000, 0x00002000)) { |
| get_thread(rcx); |
| get_method(rbx); |
| call_VM_leaf( |
| CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry), |
| rcx, rbx); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::notify_method_exit( |
| TosState state, NotifyMethodExitMode mode) { |
| // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to |
| // track stack depth. If it is possible to enter interp_only_mode we add |
| // the code to check if the event should be sent. |
| if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) { |
| Label L; |
| // Note: frame::interpreter_frame_result has a dependency on how the |
| // method result is saved across the call to post_method_exit. If this |
| // is changed then the interpreter_frame_result implementation will |
| // need to be updated too. |
| |
| // For c++ interpreter the result is always stored at a known location in the frame |
| // template interpreter will leave it on the top of the stack. |
| NOT_CC_INTERP(push(state);) |
| get_thread(rcx); |
| movl(rcx, Address(rcx, JavaThread::interp_only_mode_offset())); |
| testl(rcx,rcx); |
| jcc(Assembler::zero, L); |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit)); |
| bind(L); |
| NOT_CC_INTERP(pop(state);) |
| } |
| |
| { |
| SkipIfEqual skip_if(this, &DTraceMethodProbes, 0); |
| NOT_CC_INTERP(push(state)); |
| get_thread(rbx); |
| get_method(rcx); |
| call_VM_leaf( |
| CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit), |
| rbx, rcx); |
| NOT_CC_INTERP(pop(state)); |
| } |
| } |
| |
| // Jump if ((*counter_addr += increment) & mask) satisfies the condition. |
| void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr, |
| int increment, int mask, |
| Register scratch, bool preloaded, |
| Condition cond, Label* where) { |
| if (!preloaded) { |
| movl(scratch, counter_addr); |
| } |
| incrementl(scratch, increment); |
| movl(counter_addr, scratch); |
| andl(scratch, mask); |
| if (where != NULL) { |
| jcc(cond, *where); |
| } |
| } |