| #!/bin/bash |
| # |
| # Copyright (C) 2007 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # Set up prog to be the path of this script, including following symlinks, |
| # and set up progdir to be the fully-qualified pathname of its directory. |
| prog="$0" |
| while [ -h "${prog}" ]; do |
| newProg=`/bin/ls -ld "${prog}"` |
| newProg=`expr "${newProg}" : ".* -> \(.*\)$"` |
| if expr "x${newProg}" : 'x/' >/dev/null; then |
| prog="${newProg}" |
| else |
| progdir=`dirname "${prog}"` |
| prog="${progdir}/${newProg}" |
| fi |
| done |
| oldwd=`pwd` |
| progdir=`dirname "${prog}"` |
| cd "${progdir}" |
| progdir=`pwd` |
| prog="${progdir}"/`basename "${prog}"` |
| |
| if [[ -z "${JAVA_HOME}" ]]; then |
| unix=$(uname | tr '[A-Z]' '[a-z]') |
| JAVA_HOME="${progdir}/../../../prebuilts/jdk/jdk8/${unix}-x86" |
| fi |
| |
| if [[ ! -d "${JAVA_HOME}" ]]; then |
| echo "Missing JAVA_HOME directory: $JAVA_HOME" 1>&2 |
| exit 1 |
| fi |
| |
| export JAVAC="${JAVA_HOME}/bin/javac" |
| if [ "!" -e "$JAVAC" ]; then |
| echo "Missing JAVAC executable: ${JAVAC}" 1>&2 |
| exit 1 |
| fi |
| |
| info="info.txt" |
| run="run" |
| expected="expected.txt" |
| output="out.txt" |
| |
| clean_on_exit="yes" |
| dev_mode="no" |
| update_mode="no" |
| tmpdir=/tmp/test-$$ |
| usage="no" |
| |
| while [[ "x$1" = "x-"* ]]; do |
| case $1 in |
| --dev) dev_mode="yes" ;; |
| --no-clean) clean_on_exit="no" ;; |
| --output_dir) |
| tmpdir=$2 |
| shift ;; |
| --update) update_mode="yes" ;; |
| --help) usage="yes" ;; |
| *) usage="yes" ;; |
| esac |
| shift |
| done |
| |
| if [ "x$1" = "x" ]; then |
| testdir=`basename "$oldwd"` |
| else |
| testdir="$1" |
| fi |
| |
| if [ '!' -d "$testdir" ]; then |
| td2=`echo ${testdir}-*` |
| if [ '!' -d "$td2" ]; then |
| echo "${testdir}: no such test directory" 1>&2 |
| usage="yes" |
| fi |
| testdir="$td2" |
| fi |
| |
| if [ "$update_mode" = "yes" -a "$dev_mode" = "yes" ] ; then |
| echo Error: --dev is incompatible with --update. 1>&2 |
| usage="yes" |
| fi |
| |
| if [ "$usage" = "yes" ]; then |
| prog=`basename $prog` |
| ( |
| echo "usage:" |
| echo " $prog --help Print this message." |
| echo " $prog testname Run test normally." |
| echo " $prog --dev testname Development mode (dump to stdout)." |
| echo " $prog --update testname Update mode (replace expected.txt)." |
| echo " Omitting the test name uses the current directory as the test." |
| echo "options:" |
| echo " --output_dir <dir> Use <dir> for the test outputs." |
| ) 1>&2 |
| exit 1 |
| fi |
| |
| td_info="${testdir}/${info}" |
| td_run="${testdir}/${run}" |
| td_expected="${testdir}/${expected}" |
| |
| for td_file in "$td_info" "$td_run" "$td_expected"; do |
| if [[ ! -r "$td_file" ]]; then |
| echo "${testdir}: missing file $td_file" 1>&2 |
| exit 1 |
| fi |
| done |
| |
| # copy the test to a temp dir and run it |
| if [ -d "$tmpdir" ]; then |
| rm -rf "$tmpdir" || exit 1 |
| fi |
| output_parent=`dirname ${tmpdir}` |
| mkdir -p "${output_parent}" || exit 1 |
| cp -Rp "$testdir" "$tmpdir" || exit 1 |
| cd "$tmpdir" |
| chmod 755 "$run" |
| |
| echo "${testdir}: running..." 1>&2 |
| good="no" |
| if [ "$dev_mode" = "yes" ]; then |
| "./$run" 2>&1 |
| echo "exit status: $?" 1>&2 |
| good="yes" |
| elif [ "$update_mode" = "yes" ]; then |
| "./$run" >"$output" 2>&1 |
| if [[ $? == 0 ]]; then |
| good="yes" |
| mv "$output" "${progdir}/${td_expected}" |
| else |
| echo "Test failed during update." |
| good="no" |
| fi |
| |
| else |
| "./$run" >"$output" 2>&1 |
| cmp -s "$expected" "$output" |
| if [ "$?" = "0" ]; then |
| # output == expected |
| good="yes" |
| echo "$testdir"': succeeded!' 1>&2 |
| fi |
| fi |
| |
| if [ "$good" = "yes" ]; then |
| cd "$oldwd" |
| if [ "$clean_on_exit" = "yes" ]; then |
| rm -rf "$tmpdir" |
| else |
| echo "Test artifacts left in $tmpdir" |
| fi |
| exit 0 |
| fi |
| |
| ( |
| echo "${testdir}: FAILED!" |
| echo ' ' |
| echo '#################### info' |
| cat "$info" | sed 's/^/# /g' |
| echo '#################### diffs' |
| diff -u "$expected" "$output" |
| echo '####################' |
| echo ' ' |
| echo "files left in $tmpdir" |
| ) 1>&2 |
| |
| exit 1 |