blob: 2584017d67ec57aa0d38164e2c891093915058a3 [file] [log] [blame] [edit]
/*
* Copyright (C) 2014 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "graphics_fbdev.h"
#include <fcntl.h>
#include <linux/fb.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <unistd.h>
#include <memory>
#include <android-base/unique_fd.h>
#include "minui/minui.h"
std::unique_ptr<GRSurfaceFbdev> GRSurfaceFbdev::Create(size_t width, size_t height,
size_t row_bytes, size_t pixel_bytes) {
// Cannot use std::make_unique to access non-public ctor.
return std::unique_ptr<GRSurfaceFbdev>(new GRSurfaceFbdev(width, height, row_bytes, pixel_bytes));
}
void MinuiBackendFbdev::Blank(bool blank) {
int ret = ioctl(fb_fd, FBIOBLANK, blank ? FB_BLANK_POWERDOWN : FB_BLANK_UNBLANK);
if (ret < 0) perror("ioctl(): blank");
}
void MinuiBackendFbdev::SetDisplayedFramebuffer(size_t n) {
if (n > 1 || !double_buffered) return;
vi.yres_virtual = gr_framebuffer[0]->height * 2;
vi.yoffset = n * gr_framebuffer[0]->height;
vi.bits_per_pixel = gr_framebuffer[0]->pixel_bytes * 8;
if (ioctl(fb_fd, FBIOPUT_VSCREENINFO, &vi) < 0) {
perror("active fb swap failed");
}
displayed_buffer = n;
}
GRSurface* MinuiBackendFbdev::Init() {
android::base::unique_fd fd(open("/dev/graphics/fb0", O_RDWR | O_CLOEXEC));
if (fd == -1) {
perror("cannot open fb0");
return nullptr;
}
fb_fix_screeninfo fi;
if (ioctl(fd, FBIOGET_FSCREENINFO, &fi) < 0) {
perror("failed to get fb0 info");
return nullptr;
}
if (ioctl(fd, FBIOGET_VSCREENINFO, &vi) < 0) {
perror("failed to get fb0 info");
return nullptr;
}
// We print this out for informational purposes only, but
// throughout we assume that the framebuffer device uses an RGBX
// pixel format. This is the case for every development device I
// have access to. For some of those devices (eg, hammerhead aka
// Nexus 5), FBIOGET_VSCREENINFO *reports* that it wants a
// different format (XBGR) but actually produces the correct
// results on the display when you write RGBX.
//
// If you have a device that actually *needs* another pixel format
// (ie, BGRX, or 565), patches welcome...
printf(
"fb0 reports (possibly inaccurate):\n"
" vi.bits_per_pixel = %d\n"
" vi.red.offset = %3d .length = %3d\n"
" vi.green.offset = %3d .length = %3d\n"
" vi.blue.offset = %3d .length = %3d\n",
vi.bits_per_pixel, vi.red.offset, vi.red.length, vi.green.offset, vi.green.length,
vi.blue.offset, vi.blue.length);
void* bits = mmap(0, fi.smem_len, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
if (bits == MAP_FAILED) {
perror("failed to mmap framebuffer");
return nullptr;
}
memset(bits, 0, fi.smem_len);
gr_framebuffer[0] =
GRSurfaceFbdev::Create(vi.xres, vi.yres, fi.line_length, vi.bits_per_pixel / 8);
gr_framebuffer[0]->buffer_ = static_cast<uint8_t*>(bits);
memset(gr_framebuffer[0]->buffer_, 0, gr_framebuffer[0]->height * gr_framebuffer[0]->row_bytes);
gr_framebuffer[1] =
GRSurfaceFbdev::Create(gr_framebuffer[0]->width, gr_framebuffer[0]->height,
gr_framebuffer[0]->row_bytes, gr_framebuffer[0]->pixel_bytes);
/* check if we can use double buffering */
if (vi.yres * fi.line_length * 2 <= fi.smem_len) {
double_buffered = true;
gr_framebuffer[1]->buffer_ =
gr_framebuffer[0]->buffer_ + gr_framebuffer[0]->height * gr_framebuffer[0]->row_bytes;
} else {
double_buffered = false;
// Without double-buffering, we allocate RAM for a buffer to draw in, and then "flipping" the
// buffer consists of a memcpy from the buffer we allocated to the framebuffer.
memory_buffer.resize(gr_framebuffer[1]->height * gr_framebuffer[1]->row_bytes);
gr_framebuffer[1]->buffer_ = memory_buffer.data();
}
gr_draw = gr_framebuffer[1].get();
memset(gr_draw->buffer_, 0, gr_draw->height * gr_draw->row_bytes);
fb_fd = std::move(fd);
SetDisplayedFramebuffer(0);
printf("framebuffer: %d (%zu x %zu)\n", fb_fd.get(), gr_draw->width, gr_draw->height);
Blank(true);
Blank(false);
return gr_draw;
}
GRSurface* MinuiBackendFbdev::Flip() {
if (double_buffered) {
// Change gr_draw to point to the buffer currently displayed, then flip the driver so we're
// displaying the other buffer instead.
gr_draw = gr_framebuffer[displayed_buffer].get();
SetDisplayedFramebuffer(1 - displayed_buffer);
} else {
// Copy from the in-memory surface to the framebuffer.
memcpy(gr_framebuffer[0]->buffer_, gr_draw->buffer_, gr_draw->height * gr_draw->row_bytes);
}
return gr_draw;
}