blob: 72b6dccc5142a08ba9237e2c847f128e7ed56fa2 [file] [log] [blame]
/*
* Copyright (C) 2015 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* This program verifies the integrity of the partitions after an A/B OTA
* update. It gets invoked by init, and will only perform the verification if
* it's the first boot post an A/B OTA update.
*
* Update_verifier relies on dm-verity to capture any corruption on the partitions
* being verified. And its behavior varies depending on the dm-verity mode.
* Upon detection of failures:
* enforcing mode: dm-verity reboots the device
* eio mode: dm-verity fails the read and update_verifier reboots the device
* other mode: not supported and update_verifier reboots the device
*
* After a predefined number of failing boot attempts, the bootloader should
* mark the slot as unbootable and stops trying. Other dm-verity modes (
* for example, veritymode=EIO) are not accepted and simply lead to a
* verification failure.
*
* The current slot will be marked as having booted successfully if the
* verifier reaches the end after the verification.
*/
#include <dirent.h>
#include <errno.h>
#include <fcntl.h>
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <string>
#include <vector>
#include <android-base/file.h>
#include <android-base/logging.h>
#include <android-base/parseint.h>
#include <android-base/properties.h>
#include <android-base/strings.h>
#include <android-base/unique_fd.h>
#include <android/hardware/boot/1.0/IBootControl.h>
#include <cutils/android_reboot.h>
using android::sp;
using android::hardware::boot::V1_0::IBootControl;
using android::hardware::boot::V1_0::BoolResult;
using android::hardware::boot::V1_0::CommandResult;
constexpr auto CARE_MAP_FILE = "/data/ota_package/care_map.txt";
constexpr auto DM_PATH_PREFIX = "/sys/block/";
constexpr auto DM_PATH_SUFFIX = "/dm/name";
constexpr auto DEV_PATH = "/dev/block/";
constexpr int BLOCKSIZE = 4096;
// Find directories in format of "/sys/block/dm-X".
static int dm_name_filter(const dirent* de) {
if (android::base::StartsWith(de->d_name, "dm-")) {
return 1;
}
return 0;
}
static bool read_blocks(const std::string& partition, const std::string& range_str) {
CHECK(partition == "system" || partition == "vendor")
<< "partition name should be system or vendor" << partition;
// Iterate the content of "/sys/block/dm-X/dm/name". If it matches "system"
// (or "vendor"), then dm-X is a dm-wrapped system/vendor partition.
// Afterwards, update_verifier will read every block on the care_map_file of
// "/dev/block/dm-X" to ensure the partition's integrity.
dirent** namelist;
int n = scandir(DM_PATH_PREFIX, &namelist, dm_name_filter, alphasort);
if (n == -1) {
PLOG(ERROR) << "Failed to scan dir " << DM_PATH_PREFIX;
return false;
}
if (n == 0) {
LOG(ERROR) << "dm block device not found for " << partition;
return false;
}
std::string dm_block_device;
while (n--) {
std::string path = DM_PATH_PREFIX + std::string(namelist[n]->d_name) + DM_PATH_SUFFIX;
std::string content;
if (!android::base::ReadFileToString(path, &content)) {
PLOG(WARNING) << "Failed to read " << path;
} else if (android::base::Trim(content) == partition) {
dm_block_device = DEV_PATH + std::string(namelist[n]->d_name);
while (n--) {
free(namelist[n]);
}
break;
}
free(namelist[n]);
}
free(namelist);
if (dm_block_device.empty()) {
LOG(ERROR) << "Failed to find dm block device for " << partition;
return false;
}
android::base::unique_fd fd(TEMP_FAILURE_RETRY(open(dm_block_device.c_str(), O_RDONLY)));
if (fd.get() == -1) {
PLOG(ERROR) << "Error reading " << dm_block_device << " for partition " << partition;
return false;
}
// For block range string, first integer 'count' equals 2 * total number of valid ranges,
// followed by 'count' number comma separated integers. Every two integers reprensent a
// block range with the first number included in range but second number not included.
// For example '4,64536,65343,74149,74150' represents: [64536,65343) and [74149,74150).
std::vector<std::string> ranges = android::base::Split(range_str, ",");
size_t range_count;
bool status = android::base::ParseUint(ranges[0], &range_count);
if (!status || (range_count == 0) || (range_count % 2 != 0) ||
(range_count != ranges.size() - 1)) {
LOG(ERROR) << "Error in parsing range string.";
return false;
}
size_t blk_count = 0;
for (size_t i = 1; i < ranges.size(); i += 2) {
unsigned int range_start, range_end;
bool parse_status = android::base::ParseUint(ranges[i], &range_start);
parse_status = parse_status && android::base::ParseUint(ranges[i + 1], &range_end);
if (!parse_status || range_start >= range_end) {
LOG(ERROR) << "Invalid range pair " << ranges[i] << ", " << ranges[i + 1];
return false;
}
if (lseek64(fd.get(), static_cast<off64_t>(range_start) * BLOCKSIZE, SEEK_SET) == -1) {
PLOG(ERROR) << "lseek to " << range_start << " failed";
return false;
}
size_t size = (range_end - range_start) * BLOCKSIZE;
std::vector<uint8_t> buf(size);
if (!android::base::ReadFully(fd.get(), buf.data(), size)) {
PLOG(ERROR) << "Failed to read blocks " << range_start << " to " << range_end;
return false;
}
blk_count += (range_end - range_start);
}
LOG(INFO) << "Finished reading " << blk_count << " blocks on " << dm_block_device;
return true;
}
static bool verify_image(const std::string& care_map_name) {
android::base::unique_fd care_map_fd(TEMP_FAILURE_RETRY(open(care_map_name.c_str(), O_RDONLY)));
// If the device is flashed before the current boot, it may not have care_map.txt
// in /data/ota_package. To allow the device to continue booting in this situation,
// we should print a warning and skip the block verification.
if (care_map_fd.get() == -1) {
LOG(WARNING) << "Warning: care map " << care_map_name << " not found.";
return true;
}
// Care map file has four lines (two lines if vendor partition is not present):
// First line has the block partition name (system/vendor).
// Second line holds all ranges of blocks to verify.
// The next two lines have the same format but for vendor partition.
std::string file_content;
if (!android::base::ReadFdToString(care_map_fd.get(), &file_content)) {
LOG(ERROR) << "Error reading care map contents to string.";
return false;
}
std::vector<std::string> lines;
lines = android::base::Split(android::base::Trim(file_content), "\n");
if (lines.size() != 2 && lines.size() != 4) {
LOG(ERROR) << "Invalid lines in care_map: found " << lines.size()
<< " lines, expecting 2 or 4 lines.";
return false;
}
for (size_t i = 0; i < lines.size(); i += 2) {
if (!read_blocks(lines[i], lines[i+1])) {
return false;
}
}
return true;
}
static int reboot_device() {
if (android_reboot(ANDROID_RB_RESTART2, 0, nullptr) == -1) {
LOG(ERROR) << "Failed to reboot.";
return -1;
}
while (true) pause();
}
int main(int argc, char** argv) {
for (int i = 1; i < argc; i++) {
LOG(INFO) << "Started with arg " << i << ": " << argv[i];
}
sp<IBootControl> module = IBootControl::getService();
if (module == nullptr) {
LOG(ERROR) << "Error getting bootctrl module.";
return reboot_device();
}
uint32_t current_slot = module->getCurrentSlot();
BoolResult is_successful = module->isSlotMarkedSuccessful(current_slot);
LOG(INFO) << "Booting slot " << current_slot << ": isSlotMarkedSuccessful="
<< static_cast<int32_t>(is_successful);
if (is_successful == BoolResult::FALSE) {
// The current slot has not booted successfully.
#ifdef PRODUCT_SUPPORTS_VERITY
std::string verity_mode = android::base::GetProperty("ro.boot.veritymode", "");
if (verity_mode.empty()) {
LOG(ERROR) << "Failed to get dm-verity mode.";
return reboot_device();
} else if (android::base::EqualsIgnoreCase(verity_mode, "eio")) {
// We shouldn't see verity in EIO mode if the current slot hasn't booted successfully before.
// Continue the verification until we fail to read some blocks.
LOG(WARNING) << "Found dm-verity in EIO mode.";
} else if (verity_mode != "enforcing") {
LOG(ERROR) << "Unexpected dm-verity mode : " << verity_mode << ", expecting enforcing.";
return reboot_device();
}
if (!verify_image(CARE_MAP_FILE)) {
LOG(ERROR) << "Failed to verify all blocks in care map file.";
return reboot_device();
}
#else
LOG(WARNING) << "dm-verity not enabled; marking without verification.";
#endif
CommandResult cr;
module->markBootSuccessful([&cr](CommandResult result) { cr = result; });
if (!cr.success) {
LOG(ERROR) << "Error marking booted successfully: " << cr.errMsg;
return reboot_device();
}
LOG(INFO) << "Marked slot " << current_slot << " as booted successfully.";
}
LOG(INFO) << "Leaving update_verifier.";
return 0;
}