| /* Copyright (c) 2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include "msm_fb.h" |
| #include "mipi_dsi.h" |
| #include "mipi_orise.h" |
| |
| static struct msm_panel_info pinfo; |
| |
| static struct mipi_dsi_phy_ctrl dsi_cmd_mode_phy_db = { |
| /* DSI_BIT_CLK at 507MHz, 4 lane, RGB888 */ |
| {0x03, 0x0a, 0x04, 0x00, 0x20}, |
| /* timing */ |
| {0x8c, 0x34, 0x15, 0x00, 0x46, 0x50, 0x1a, 0x38, |
| 0x24, 0x03, 0x04, 0xa0}, |
| /* phy ctrl */ |
| {0x5f, 0x00, 0x00, 0x10}, |
| /* strength */ |
| {0xff, 0x00, 0x06, 0x00}, |
| /* pll control */ |
| {0x0, 0xf9, 0x30, 0xda, 0x00, 0x40, 0x03, 0x62, |
| 0x40, 0x07, 0x03, |
| 0x00, 0x1a, 0x00, 0x00, 0x02, 0x00, 0x20, 0x00, 0x01 }, |
| }; |
| |
| static int __init mipi_cmd_orise_720p_pt_init(void) |
| { |
| int ret; |
| |
| if (msm_fb_detect_client("mipi_cmd_orise_720p")) |
| return 0; |
| |
| pinfo.xres = 720; |
| pinfo.yres = 1280; |
| pinfo.type = MIPI_CMD_PANEL; |
| pinfo.pdest = DISPLAY_1; |
| pinfo.wait_cycle = 0; |
| pinfo.bpp = 24; |
| pinfo.lcdc.h_back_porch = 160; |
| pinfo.lcdc.h_front_porch = 160; |
| pinfo.lcdc.h_pulse_width = 8; |
| pinfo.lcdc.v_back_porch = 32; |
| pinfo.lcdc.v_front_porch = 32; |
| pinfo.lcdc.v_pulse_width = 1; |
| pinfo.lcdc.border_clr = 0; /* blk */ |
| pinfo.lcdc.underflow_clr = 0xff; /* blue */ |
| pinfo.lcdc.hsync_skew = 0; |
| pinfo.bl_max = 200; |
| pinfo.bl_min = 1; |
| pinfo.fb_num = 2; |
| pinfo.clk_rate = 507000000; |
| pinfo.lcd.vsync_enable = TRUE; |
| pinfo.lcd.hw_vsync_mode = TRUE; |
| pinfo.lcd.refx100 = 6000; /* adjust refx100 to prevent tearing */ |
| pinfo.lcd.v_back_porch = 32; |
| pinfo.lcd.v_front_porch = 32; |
| pinfo.lcd.v_pulse_width = 1; |
| |
| pinfo.mipi.mode = DSI_CMD_MODE; |
| pinfo.mipi.dst_format = DSI_CMD_DST_FORMAT_RGB888; |
| pinfo.mipi.vc = 0; |
| pinfo.mipi.data_lane0 = TRUE; |
| pinfo.mipi.data_lane1 = TRUE; |
| pinfo.mipi.data_lane2 = TRUE; |
| pinfo.mipi.data_lane3 = TRUE; |
| pinfo.mipi.t_clk_post = 0x04; |
| pinfo.mipi.t_clk_pre = 0x1e; |
| pinfo.mipi.stream = 0; /* dma_p */ |
| pinfo.mipi.mdp_trigger = DSI_CMD_TRIGGER_NONE; |
| pinfo.mipi.dma_trigger = DSI_CMD_TRIGGER_SW; |
| pinfo.mipi.te_sel = 1; /* TE from vsycn gpio */ |
| pinfo.mipi.interleave_max = 1; |
| pinfo.mipi.insert_dcs_cmd = TRUE; |
| pinfo.mipi.wr_mem_continue = 0x3c; |
| pinfo.mipi.wr_mem_start = 0x2c; |
| pinfo.mipi.dsi_phy_db = &dsi_cmd_mode_phy_db; |
| |
| ret = mipi_orise_device_register(&pinfo, MIPI_DSI_PRIM, |
| MIPI_DSI_PANEL_720P_PT); |
| if (ret) |
| pr_err("%s: failed to register device!\n", __func__); |
| |
| return ret; |
| } |
| |
| module_init(mipi_cmd_orise_720p_pt_init); |