blob: 730b09beb13e16d06b93a024a4d3364e4b1a9d96 [file] [log] [blame]
/*
* Copyright (c) 2014-2020, Arm Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch.h>
#include <asm_macros.S>
#include <assert_macros.S>
#include <common/bl_common.h>
#include <common/debug.h>
#include <cpu_macros.S>
#include <lib/cpus/errata_report.h>
#include <lib/el3_runtime/cpu_data.h>
/* Reset fn is needed in BL at reset vector */
#if defined(IMAGE_BL1) || defined(IMAGE_BL31) || (defined(IMAGE_BL2) && BL2_AT_EL3)
/*
* The reset handler common to all platforms. After a matching
* cpu_ops structure entry is found, the correponding reset_handler
* in the cpu_ops is invoked.
* Clobbers: x0 - x19, x30
*/
.globl reset_handler
func reset_handler
mov x19, x30
/* The plat_reset_handler can clobber x0 - x18, x30 */
bl plat_reset_handler
/* Get the matching cpu_ops pointer */
bl get_cpu_ops_ptr
#if ENABLE_ASSERTIONS
cmp x0, #0
ASM_ASSERT(ne)
#endif
/* Get the cpu_ops reset handler */
ldr x2, [x0, #CPU_RESET_FUNC]
mov x30, x19
cbz x2, 1f
/* The cpu_ops reset handler can clobber x0 - x19, x30 */
br x2
1:
ret
endfunc reset_handler
#endif
#ifdef IMAGE_BL31 /* The power down core and cluster is needed only in BL31 */
/*
* void prepare_cpu_pwr_dwn(unsigned int power_level)
*
* Prepare CPU power down function for all platforms. The function takes
* a domain level to be powered down as its parameter. After the cpu_ops
* pointer is retrieved from cpu_data, the handler for requested power
* level is called.
*/
.globl prepare_cpu_pwr_dwn
func prepare_cpu_pwr_dwn
/*
* If the given power level exceeds CPU_MAX_PWR_DWN_OPS, we call the
* power down handler for the last power level
*/
mov_imm x2, (CPU_MAX_PWR_DWN_OPS - 1)
cmp x0, x2
csel x2, x2, x0, hi
mrs x1, tpidr_el3
ldr x0, [x1, #CPU_DATA_CPU_OPS_PTR]
#if ENABLE_ASSERTIONS
cmp x0, #0
ASM_ASSERT(ne)
#endif
/* Get the appropriate power down handler */
mov x1, #CPU_PWR_DWN_OPS
add x1, x1, x2, lsl #3
ldr x1, [x0, x1]
#if ENABLE_ASSERTIONS
cmp x1, #0
ASM_ASSERT(ne)
#endif
br x1
endfunc prepare_cpu_pwr_dwn
/*
* Initializes the cpu_ops_ptr if not already initialized
* in cpu_data. This can be called without a runtime stack, but may
* only be called after the MMU is enabled.
* clobbers: x0 - x6, x10
*/
.globl init_cpu_ops
func init_cpu_ops
mrs x6, tpidr_el3
ldr x0, [x6, #CPU_DATA_CPU_OPS_PTR]
cbnz x0, 1f
mov x10, x30
bl get_cpu_ops_ptr
#if ENABLE_ASSERTIONS
cmp x0, #0
ASM_ASSERT(ne)
#endif
str x0, [x6, #CPU_DATA_CPU_OPS_PTR]!
mov x30, x10
1:
ret
endfunc init_cpu_ops
#endif /* IMAGE_BL31 */
#if defined(IMAGE_BL31) && CRASH_REPORTING
/*
* The cpu specific registers which need to be reported in a crash
* are reported via cpu_ops cpu_reg_dump function. After a matching
* cpu_ops structure entry is found, the correponding cpu_reg_dump
* in the cpu_ops is invoked.
*/
.globl do_cpu_reg_dump
func do_cpu_reg_dump
mov x16, x30
/* Get the matching cpu_ops pointer */
bl get_cpu_ops_ptr
cbz x0, 1f
/* Get the cpu_ops cpu_reg_dump */
ldr x2, [x0, #CPU_REG_DUMP]
cbz x2, 1f
blr x2
1:
mov x30, x16
ret
endfunc do_cpu_reg_dump
#endif
/*
* The below function returns the cpu_ops structure matching the
* midr of the core. It reads the MIDR_EL1 and finds the matching
* entry in cpu_ops entries. Only the implementation and part number
* are used to match the entries.
*
* If cpu_ops for the MIDR_EL1 cannot be found and
* SUPPORT_UNKNOWN_MPID is enabled, it will try to look for a
* default cpu_ops with an MIDR value of 0.
* (Implementation number 0x0 should be reseverd for software use
* and therefore no clashes should happen with that default value).
*
* Return :
* x0 - The matching cpu_ops pointer on Success
* x0 - 0 on failure.
* Clobbers : x0 - x5
*/
.globl get_cpu_ops_ptr
func get_cpu_ops_ptr
/* Read the MIDR_EL1 */
mrs x2, midr_el1
mov_imm x3, CPU_IMPL_PN_MASK
/* Retain only the implementation and part number using mask */
and w2, w2, w3
/* Get the cpu_ops end location */
adr x5, (__CPU_OPS_END__ + CPU_MIDR)
/* Initialize the return parameter */
mov x0, #0
1:
/* Get the cpu_ops start location */
adr x4, (__CPU_OPS_START__ + CPU_MIDR)
2:
/* Check if we have reached end of list */
cmp x4, x5
b.eq search_def_ptr
/* load the midr from the cpu_ops */
ldr x1, [x4], #CPU_OPS_SIZE
and w1, w1, w3
/* Check if midr matches to midr of this core */
cmp w1, w2
b.ne 2b
/* Subtract the increment and offset to get the cpu-ops pointer */
sub x0, x4, #(CPU_OPS_SIZE + CPU_MIDR)
#if ENABLE_ASSERTIONS
cmp x0, #0
ASM_ASSERT(ne)
#endif
#ifdef SUPPORT_UNKNOWN_MPID
cbnz x2, exit_mpid_found
/* Mark the unsupported MPID flag */
adrp x1, unsupported_mpid_flag
add x1, x1, :lo12:unsupported_mpid_flag
str w2, [x1]
exit_mpid_found:
#endif
ret
/*
* Search again for a default pointer (MIDR = 0x0)
* or return error if already searched.
*/
search_def_ptr:
#ifdef SUPPORT_UNKNOWN_MPID
cbz x2, error_exit
mov x2, #0
b 1b
error_exit:
#endif
ret
endfunc get_cpu_ops_ptr
/*
* Extract CPU revision and variant, and combine them into a single numeric for
* easier comparison.
*/
.globl cpu_get_rev_var
func cpu_get_rev_var
mrs x1, midr_el1
/*
* Extract the variant[23:20] and revision[3:0] from MIDR, and pack them
* as variant[7:4] and revision[3:0] of x0.
*
* First extract x1[23:16] to x0[7:0] and zero fill the rest. Then
* extract x1[3:0] into x0[3:0] retaining other bits.
*/
ubfx x0, x1, #(MIDR_VAR_SHIFT - MIDR_REV_BITS), #(MIDR_REV_BITS + MIDR_VAR_BITS)
bfxil x0, x1, #MIDR_REV_SHIFT, #MIDR_REV_BITS
ret
endfunc cpu_get_rev_var
/*
* Compare the CPU's revision-variant (x0) with a given value (x1), for errata
* application purposes. If the revision-variant is less than or same as a given
* value, indicates that errata applies; otherwise not.
*
* Shall clobber: x0-x3
*/
.globl cpu_rev_var_ls
func cpu_rev_var_ls
mov x2, #ERRATA_APPLIES
mov x3, #ERRATA_NOT_APPLIES
cmp x0, x1
csel x0, x2, x3, ls
ret
endfunc cpu_rev_var_ls
/*
* Compare the CPU's revision-variant (x0) with a given value (x1), for errata
* application purposes. If the revision-variant is higher than or same as a
* given value, indicates that errata applies; otherwise not.
*
* Shall clobber: x0-x3
*/
.globl cpu_rev_var_hs
func cpu_rev_var_hs
mov x2, #ERRATA_APPLIES
mov x3, #ERRATA_NOT_APPLIES
cmp x0, x1
csel x0, x2, x3, hs
ret
endfunc cpu_rev_var_hs
/*
* Compare the CPU's revision-variant (x0) with a given range (x1 - x2), for errata
* application purposes. If the revision-variant is between or includes the given
* values, this indicates that errata applies; otherwise not.
*
* Shall clobber: x0-x4
*/
.globl cpu_rev_var_range
func cpu_rev_var_range
mov x3, #ERRATA_APPLIES
mov x4, #ERRATA_NOT_APPLIES
cmp x0, x1
csel x1, x3, x4, hs
cbz x1, 1f
cmp x0, x2
csel x1, x3, x4, ls
1:
mov x0, x1
ret
endfunc cpu_rev_var_range
#if REPORT_ERRATA
/*
* void print_errata_status(void);
*
* Function to print errata status for CPUs of its class. Must be called only:
*
* - with MMU and data caches are enabled;
* - after cpu_ops have been initialized in per-CPU data.
*/
.globl print_errata_status
func print_errata_status
#ifdef IMAGE_BL1
/*
* BL1 doesn't have per-CPU data. So retrieve the CPU operations
* directly.
*/
stp xzr, x30, [sp, #-16]!
bl get_cpu_ops_ptr
ldp xzr, x30, [sp], #16
ldr x1, [x0, #CPU_ERRATA_FUNC]
cbnz x1, .Lprint
#else
/*
* Retrieve pointer to cpu_ops from per-CPU data, and further, the
* errata printing function. If it's non-NULL, jump to the function in
* turn.
*/
mrs x0, tpidr_el3
#if ENABLE_ASSERTIONS
cmp x0, #0
ASM_ASSERT(ne)
#endif
ldr x1, [x0, #CPU_DATA_CPU_OPS_PTR]
#if ENABLE_ASSERTIONS
cmp x1, #0
ASM_ASSERT(ne)
#endif
ldr x0, [x1, #CPU_ERRATA_FUNC]
cbz x0, .Lnoprint
/*
* Printing errata status requires atomically testing the printed flag.
*/
stp x19, x30, [sp, #-16]!
mov x19, x0
/*
* Load pointers to errata lock and printed flag. Call
* errata_needs_reporting to check whether this CPU needs to report
* errata status pertaining to its class.
*/
ldr x0, [x1, #CPU_ERRATA_LOCK]
ldr x1, [x1, #CPU_ERRATA_PRINTED]
bl errata_needs_reporting
mov x1, x19
ldp x19, x30, [sp], #16
cbnz x0, .Lprint
#endif
.Lnoprint:
ret
.Lprint:
/* Jump to errata reporting function for this CPU */
br x1
endfunc print_errata_status
#endif
/*
* int check_wa_cve_2017_5715(void);
*
* This function returns:
* - ERRATA_APPLIES when firmware mitigation is required.
* - ERRATA_NOT_APPLIES when firmware mitigation is _not_ required.
* - ERRATA_MISSING when firmware mitigation would be required but
* is not compiled in.
*
* NOTE: Must be called only after cpu_ops have been initialized
* in per-CPU data.
*/
.globl check_wa_cve_2017_5715
func check_wa_cve_2017_5715
mrs x0, tpidr_el3
#if ENABLE_ASSERTIONS
cmp x0, #0
ASM_ASSERT(ne)
#endif
ldr x0, [x0, #CPU_DATA_CPU_OPS_PTR]
#if ENABLE_ASSERTIONS
cmp x0, #0
ASM_ASSERT(ne)
#endif
ldr x0, [x0, #CPU_EXTRA1_FUNC]
/*
* If the reserved function pointer is NULL, this CPU
* is unaffected by CVE-2017-5715 so bail out.
*/
cmp x0, #0
beq 1f
br x0
1:
mov x0, #ERRATA_NOT_APPLIES
ret
endfunc check_wa_cve_2017_5715
/*
* void *wa_cve_2018_3639_get_disable_ptr(void);
*
* Returns a function pointer which is used to disable mitigation
* for CVE-2018-3639.
* The function pointer is only returned on cores that employ
* dynamic mitigation. If the core uses static mitigation or is
* unaffected by CVE-2018-3639 this function returns NULL.
*
* NOTE: Must be called only after cpu_ops have been initialized
* in per-CPU data.
*/
.globl wa_cve_2018_3639_get_disable_ptr
func wa_cve_2018_3639_get_disable_ptr
mrs x0, tpidr_el3
#if ENABLE_ASSERTIONS
cmp x0, #0
ASM_ASSERT(ne)
#endif
ldr x0, [x0, #CPU_DATA_CPU_OPS_PTR]
#if ENABLE_ASSERTIONS
cmp x0, #0
ASM_ASSERT(ne)
#endif
ldr x0, [x0, #CPU_EXTRA2_FUNC]
ret
endfunc wa_cve_2018_3639_get_disable_ptr