vendor/base64/src/lib.rs - toolchain/rustc - Git at Google

 //! Correct, fast, and configurable [base64][] decoding and encoding. Base64
 //! transports binary data efficiently in contexts where only plain text is
 //! allowed.
 //!
 //! [base64]: https://developer.mozilla.org/en-US/docs/Glossary/Base64
 //!
 //! # Usage
 //!
 //! Use an [`Engine`] to decode or encode base64, configured with the base64
 //! alphabet and padding behavior best suited to your application.
 //!
 //! ## Engine setup
 //!
 //! There is more than one way to encode a stream of bytes as “base64”.
 //! Different applications use different encoding
 //! [alphabets][alphabet::Alphabet] and
 //! [padding behaviors][engine::general_purpose::GeneralPurposeConfig].
 //!
 //! ### Encoding alphabet
 //!
 //! Almost all base64 [alphabets][alphabet::Alphabet] use `A-Z`, `a-z`, and
 //! `0-9`, which gives nearly 64 characters (26 + 26 + 10 = 62), but they differ
 //! in their choice of their final 2.
 //!
 //! Most applications use the [standard][alphabet::STANDARD] alphabet specified
 //! in [RFC 4648][rfc-alphabet].  If that’s all you need, you can get started
 //! quickly by using the pre-configured
 //! [`STANDARD`][engine::general_purpose::STANDARD] engine, which is also available
 //! in the [`prelude`] module as shown here, if you prefer a minimal `use`
 //! footprint.
 //!
 #![cfg_attr(feature = "alloc", doc = "```")]
 #![cfg_attr(not(feature = "alloc"), doc = "```ignore")]
 //! use base64::prelude::*;
 //!
 //! # fn main() -> Result<(), base64::DecodeError> {
 //! assert_eq!(BASE64_STANDARD.decode(b"+uwgVQA=")?, b"\xFA\xEC\x20\x55\0");
 //! assert_eq!(BASE64_STANDARD.encode(b"\xFF\xEC\x20\x55\0"), "/+wgVQA=");
 //! # Ok(())
 //! # }
 //! ```
 //!
 //! [rfc-alphabet]: https://datatracker.ietf.org/doc/html/rfc4648#section-4
 //!
 //! Other common alphabets are available in the [`alphabet`] module.
 //!
 //! #### URL-safe alphabet
 //!
 //! The standard alphabet uses `+` and `/` as its two non-alphanumeric tokens,
 //! which cannot be safely used in URL’s without encoding them as `%2B` and
 //! `%2F`.
 //!
 //! To avoid that, some applications use a [“URL-safe” alphabet][alphabet::URL_SAFE],
 //! which uses `-` and `_` instead. To use that alternative alphabet, use the
 //! [`URL_SAFE`][engine::general_purpose::URL_SAFE] engine. This example doesn't
 //! use [`prelude`] to show what a more explicit `use` would look like.
 //!
 #![cfg_attr(feature = "alloc", doc = "```")]
 #![cfg_attr(not(feature = "alloc"), doc = "```ignore")]
 //! use base64::{engine::general_purpose::URL_SAFE, Engine as _};
 //!
 //! # fn main() -> Result<(), base64::DecodeError> {
 //! assert_eq!(URL_SAFE.decode(b"-uwgVQA=")?, b"\xFA\xEC\x20\x55\0");
 //! assert_eq!(URL_SAFE.encode(b"\xFF\xEC\x20\x55\0"), "_-wgVQA=");
 //! # Ok(())
 //! # }
 //! ```
 //!
 //! ### Padding characters
 //!
 //! Each base64 character represents 6 bits (2⁶ = 64) of the original binary
 //! data, and every 3 bytes of input binary data will encode to 4 base64
 //! characters (8 bits × 3 = 6 bits × 4 = 24 bits).
 //!
 //! When the input is not an even multiple of 3 bytes in length, [canonical][]
 //! base64 encoders insert padding characters at the end, so that the output
 //! length is always a multiple of 4:
 //!
 //! [canonical]: https://datatracker.ietf.org/doc/html/rfc4648#section-3.5
 //!
 #![cfg_attr(feature = "alloc", doc = "```")]
 #![cfg_attr(not(feature = "alloc"), doc = "```ignore")]
 //! use base64::{engine::general_purpose::STANDARD, Engine as _};
 //!
 //! assert_eq!(STANDARD.encode(b""),    "");
 //! assert_eq!(STANDARD.encode(b"f"),   "Zg==");
 //! assert_eq!(STANDARD.encode(b"fo"),  "Zm8=");
 //! assert_eq!(STANDARD.encode(b"foo"), "Zm9v");
 //! ```
 //!
 //! Canonical encoding ensures that base64 encodings will be exactly the same,
 //! byte-for-byte, regardless of input length. But the `=` padding characters
 //! aren’t necessary for decoding, and they may be omitted by using a
 //! [`NO_PAD`][engine::general_purpose::NO_PAD] configuration:
 //!
 #![cfg_attr(feature = "alloc", doc = "```")]
 #![cfg_attr(not(feature = "alloc"), doc = "```ignore")]
 //! use base64::{engine::general_purpose::STANDARD_NO_PAD, Engine as _};
 //!
 //! assert_eq!(STANDARD_NO_PAD.encode(b""),    "");
 //! assert_eq!(STANDARD_NO_PAD.encode(b"f"),   "Zg");
 //! assert_eq!(STANDARD_NO_PAD.encode(b"fo"),  "Zm8");
 //! assert_eq!(STANDARD_NO_PAD.encode(b"foo"), "Zm9v");
 //! ```
 //!
 //! The pre-configured `NO_PAD` engines will reject inputs containing padding
 //! `=` characters. To encode without padding and still accept padding while
 //! decoding, create an [engine][engine::general_purpose::GeneralPurpose] with
 //! that [padding mode][engine::DecodePaddingMode].
 //!
 #![cfg_attr(feature = "alloc", doc = "```")]
 #![cfg_attr(not(feature = "alloc"), doc = "```ignore")]
 //! # use base64::{engine::general_purpose::STANDARD_NO_PAD, Engine as _};
 //! assert_eq!(STANDARD_NO_PAD.decode(b"Zm8="), Err(base64::DecodeError::InvalidPadding));
 //! ```
 //!
 //! ### Further customization
 //!
 //! Decoding and encoding behavior can be customized by creating an
 //! [engine][engine::GeneralPurpose] with an [alphabet][alphabet::Alphabet] and
 //! [padding configuration][engine::GeneralPurposeConfig]:
 //!
 #![cfg_attr(feature = "alloc", doc = "```")]
 #![cfg_attr(not(feature = "alloc"), doc = "```ignore")]
 //! use base64::{engine, alphabet, Engine as _};
 //!
 //! // bizarro-world base64: +/ as the first symbols instead of the last
 //! let alphabet =
 //!     alphabet::Alphabet::new("+/ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789")
 //!     .unwrap();
 //!
 //! // a very weird config that encodes with padding but requires no padding when decoding...?
 //! let crazy_config = engine::GeneralPurposeConfig::new()
 //!     .with_decode_allow_trailing_bits(true)
 //!     .with_encode_padding(true)
 //!     .with_decode_padding_mode(engine::DecodePaddingMode::RequireNone);
 //!
 //! let crazy_engine = engine::GeneralPurpose::new(&alphabet, crazy_config);
 //!
 //! let encoded = crazy_engine.encode(b"abc 123");
 //!
 //! ```
 //!
 //! ## Memory allocation
 //!
 //! The [decode][Engine::decode()] and [encode][Engine::encode()] engine methods
 //! allocate memory for their results – `decode` returns a `Vec<u8>` and
 //! `encode` returns a `String`. To instead decode or encode into a buffer that
 //! you allocated, use one of the alternative methods:
 //!
 //! #### Decoding
 //!
 //! | Method                     | Output                        | Allocates memory              |
 //! | -------------------------- | ----------------------------- | ----------------------------- |
 //! | [`Engine::decode`]         | returns a new `Vec<u8>`       | always                        |
 //! | [`Engine::decode_vec`]     | appends to provided `Vec<u8>` | if `Vec` lacks capacity       |
 //! | [`Engine::decode_slice`]   | writes to provided `&[u8]`    | never
 //!
 //! #### Encoding
 //!
 //! | Method                     | Output                       | Allocates memory               |
 //! | -------------------------- | ---------------------------- | ------------------------------ |
 //! | [`Engine::encode`]         | returns a new `String`       | always                         |
 //! | [`Engine::encode_string`]  | appends to provided `String` | if `String` lacks capacity     |
 //! | [`Engine::encode_slice`]   | writes to provided `&[u8]`   | never                          |
 //!
 //! ## Input and output
 //!
 //! The `base64` crate can [decode][Engine::decode()] and
 //! [encode][Engine::encode()] values in memory, or
 //! [`DecoderReader`][read::DecoderReader] and
 //! [`EncoderWriter`][write::EncoderWriter] provide streaming decoding and
 //! encoding for any [readable][std::io::Read] or [writable][std::io::Write]
 //! byte stream.
 //!
 //! #### Decoding
 //!
 #![cfg_attr(feature = "std", doc = "```")]
 #![cfg_attr(not(feature = "std"), doc = "```ignore")]
 //! # use std::io;
 //! use base64::{engine::general_purpose::STANDARD, read::DecoderReader};
 //!
 //! # fn main() -> Result<(), Box<dyn std::error::Error>> {
 //! let mut input = io::stdin();
 //! let mut decoder = DecoderReader::new(&mut input, &STANDARD);
 //! io::copy(&mut decoder, &mut io::stdout())?;
 //! # Ok(())
 //! # }
 //! ```
 //!
 //! #### Encoding
 //!
 #![cfg_attr(feature = "std", doc = "```")]
 #![cfg_attr(not(feature = "std"), doc = "```ignore")]
 //! # use std::io;
 //! use base64::{engine::general_purpose::STANDARD, write::EncoderWriter};
 //!
 //! # fn main() -> Result<(), Box<dyn std::error::Error>> {
 //! let mut output = io::stdout();
 //! let mut encoder = EncoderWriter::new(&mut output, &STANDARD);
 //! io::copy(&mut io::stdin(), &mut encoder)?;
 //! # Ok(())
 //! # }
 //! ```
 //!
 //! #### Display
 //!
 //! If you only need a base64 representation for implementing the
 //! [`Display`][std::fmt::Display] trait, use
 //! [`Base64Display`][display::Base64Display]:
 //!
 //! ```
 //! use base64::{display::Base64Display, engine::general_purpose::STANDARD};
 //!
 //! let value = Base64Display::new(b"\0\x01\x02\x03", &STANDARD);
 //! assert_eq!("base64: AAECAw==", format!("base64: {}", value));
 //! ```
 //!
 //! # Panics
 //!
 //! If length calculations result in overflowing `usize`, a panic will result.

 #![cfg_attr(feature = "cargo-clippy", allow(clippy::cast_lossless))]
 #![deny(
     missing_docs,
     trivial_casts,
     trivial_numeric_casts,
     unused_extern_crates,
     unused_import_braces,
     unused_results,
     variant_size_differences,
     warnings
 )]
 #![forbid(unsafe_code)]
 // Allow globally until https://github.com/rust-lang/rust-clippy/issues/8768 is resolved.
 // The desired state is to allow it only for the rstest_reuse import.
 #![allow(clippy::single_component_path_imports)]
 #![cfg_attr(not(any(feature = "std", test)), no_std)]

 #[cfg(any(feature = "alloc", test))]
 extern crate alloc;

 // has to be included at top level because of the way rstest_reuse defines its macros
 #[cfg(test)]
 use rstest_reuse;

 mod chunked_encoder;
 pub mod display;
 #[cfg(any(feature = "std", test))]
 pub mod read;
 #[cfg(any(feature = "std", test))]
 pub mod write;

 pub mod engine;
 pub use engine::Engine;

 pub mod alphabet;

 mod encode;
 #[allow(deprecated)]
 #[cfg(any(feature = "alloc", test))]
 pub use crate::encode::{encode, encode_engine, encode_engine_string};
 #[allow(deprecated)]
 pub use crate::encode::{encode_engine_slice, encoded_len, EncodeSliceError};

 mod decode;
 #[allow(deprecated)]
 #[cfg(any(feature = "alloc", test))]
 pub use crate::decode::{decode, decode_engine, decode_engine_vec};
 #[allow(deprecated)]
 pub use crate::decode::{decode_engine_slice, decoded_len_estimate, DecodeError, DecodeSliceError};

 pub mod prelude;

 #[cfg(test)]
 mod tests;

 const PAD_BYTE: u8 = b'=';
	//! Correct, fast, and configurable [base64][] decoding and encoding. Base64
	//! transports binary data efficiently in contexts where only plain text is
	//! allowed.
	//!
	//! [base64]: https://developer.mozilla.org/en-US/docs/Glossary/Base64
	//!
	//! # Usage
	//!
	//! Use an [`Engine`] to decode or encode base64, configured with the base64
	//! alphabet and padding behavior best suited to your application.
	//!
	//! ## Engine setup
	//!
	//! There is more than one way to encode a stream of bytes as “base64”.
	//! Different applications use different encoding
	//! [alphabets][alphabet::Alphabet] and
	//! [padding behaviors][engine::general_purpose::GeneralPurposeConfig].
	//!
	//! ### Encoding alphabet
	//!
	//! Almost all base64 [alphabets][alphabet::Alphabet] use `A-Z`, `a-z`, and
	//! `0-9`, which gives nearly 64 characters (26 + 26 + 10 = 62), but they differ
	//! in their choice of their final 2.
	//!
	//! Most applications use the [standard][alphabet::STANDARD] alphabet specified
	//! in [RFC 4648][rfc-alphabet]. If that’s all you need, you can get started
	//! quickly by using the pre-configured
	//! [`STANDARD`][engine::general_purpose::STANDARD] engine, which is also available
	//! in the [`prelude`] module as shown here, if you prefer a minimal `use`
	//! footprint.
	//!
	#![cfg_attr(feature = "alloc", doc = "```")]
	#![cfg_attr(not(feature = "alloc"), doc = "```ignore")]
	//! use base64::prelude::*;
	//!
	//! # fn main() -> Result<(), base64::DecodeError> {
	//! assert_eq!(BASE64_STANDARD.decode(b"+uwgVQA=")?, b"\xFA\xEC\x20\x55\0");
	//! assert_eq!(BASE64_STANDARD.encode(b"\xFF\xEC\x20\x55\0"), "/+wgVQA=");
	//! # Ok(())
	//! # }
	//! ```
	//!
	//! [rfc-alphabet]: https://datatracker.ietf.org/doc/html/rfc4648#section-4
	//!
	//! Other common alphabets are available in the [`alphabet`] module.
	//!
	//! #### URL-safe alphabet
	//!
	//! The standard alphabet uses `+` and `/` as its two non-alphanumeric tokens,
	//! which cannot be safely used in URL’s without encoding them as `%2B` and
	//! `%2F`.
	//!
	//! To avoid that, some applications use a [“URL-safe” alphabet][alphabet::URL_SAFE],
	//! which uses `-` and `_` instead. To use that alternative alphabet, use the
	//! [`URL_SAFE`][engine::general_purpose::URL_SAFE] engine. This example doesn't
	//! use [`prelude`] to show what a more explicit `use` would look like.
	//!
	#![cfg_attr(feature = "alloc", doc = "```")]
	#![cfg_attr(not(feature = "alloc"), doc = "```ignore")]
	//! use base64::{engine::general_purpose::URL_SAFE, Engine as _};
	//!
	//! # fn main() -> Result<(), base64::DecodeError> {
	//! assert_eq!(URL_SAFE.decode(b"-uwgVQA=")?, b"\xFA\xEC\x20\x55\0");
	//! assert_eq!(URL_SAFE.encode(b"\xFF\xEC\x20\x55\0"), "_-wgVQA=");
	//! # Ok(())
	//! # }
	//! ```
	//!
	//! ### Padding characters
	//!
	//! Each base64 character represents 6 bits (2⁶ = 64) of the original binary
	//! data, and every 3 bytes of input binary data will encode to 4 base64
	//! characters (8 bits × 3 = 6 bits × 4 = 24 bits).
	//!
	//! When the input is not an even multiple of 3 bytes in length, [canonical][]
	//! base64 encoders insert padding characters at the end, so that the output
	//! length is always a multiple of 4:
	//!
	//! [canonical]: https://datatracker.ietf.org/doc/html/rfc4648#section-3.5
	//!
	#![cfg_attr(feature = "alloc", doc = "```")]
	#![cfg_attr(not(feature = "alloc"), doc = "```ignore")]
	//! use base64::{engine::general_purpose::STANDARD, Engine as _};
	//!
	//! assert_eq!(STANDARD.encode(b""), "");
	//! assert_eq!(STANDARD.encode(b"f"), "Zg==");
	//! assert_eq!(STANDARD.encode(b"fo"), "Zm8=");
	//! assert_eq!(STANDARD.encode(b"foo"), "Zm9v");
	//! ```
	//!
	//! Canonical encoding ensures that base64 encodings will be exactly the same,
	//! byte-for-byte, regardless of input length. But the `=` padding characters
	//! aren’t necessary for decoding, and they may be omitted by using a
	//! [`NO_PAD`][engine::general_purpose::NO_PAD] configuration:
	//!
	#![cfg_attr(feature = "alloc", doc = "```")]
	#![cfg_attr(not(feature = "alloc"), doc = "```ignore")]
	//! use base64::{engine::general_purpose::STANDARD_NO_PAD, Engine as _};
	//!
	//! assert_eq!(STANDARD_NO_PAD.encode(b""), "");
	//! assert_eq!(STANDARD_NO_PAD.encode(b"f"), "Zg");
	//! assert_eq!(STANDARD_NO_PAD.encode(b"fo"), "Zm8");
	//! assert_eq!(STANDARD_NO_PAD.encode(b"foo"), "Zm9v");
	//! ```
	//!
	//! The pre-configured `NO_PAD` engines will reject inputs containing padding
	//! `=` characters. To encode without padding and still accept padding while
	//! decoding, create an [engine][engine::general_purpose::GeneralPurpose] with
	//! that [padding mode][engine::DecodePaddingMode].
	//!
	#![cfg_attr(feature = "alloc", doc = "```")]
	#![cfg_attr(not(feature = "alloc"), doc = "```ignore")]
	//! # use base64::{engine::general_purpose::STANDARD_NO_PAD, Engine as _};
	//! assert_eq!(STANDARD_NO_PAD.decode(b"Zm8="), Err(base64::DecodeError::InvalidPadding));
	//! ```
	//!
	//! ### Further customization
	//!
	//! Decoding and encoding behavior can be customized by creating an
	//! [engine][engine::GeneralPurpose] with an [alphabet][alphabet::Alphabet] and
	//! [padding configuration][engine::GeneralPurposeConfig]:
	//!
	#![cfg_attr(feature = "alloc", doc = "```")]
	#![cfg_attr(not(feature = "alloc"), doc = "```ignore")]
	//! use base64::{engine, alphabet, Engine as _};
	//!
	//! // bizarro-world base64: +/ as the first symbols instead of the last
	//! let alphabet =
	//! alphabet::Alphabet::new("+/ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789")
	//! .unwrap();
	//!
	//! // a very weird config that encodes with padding but requires no padding when decoding...?
	//! let crazy_config = engine::GeneralPurposeConfig::new()
	//! .with_decode_allow_trailing_bits(true)
	//! .with_encode_padding(true)
	//! .with_decode_padding_mode(engine::DecodePaddingMode::RequireNone);
	//!
	//! let crazy_engine = engine::GeneralPurpose::new(&alphabet, crazy_config);
	//!
	//! let encoded = crazy_engine.encode(b"abc 123");
	//!
	//! ```
	//!
	//! ## Memory allocation
	//!
	//! The [decode][Engine::decode()] and [encode][Engine::encode()] engine methods
	//! allocate memory for their results – `decode` returns a `Vec<u8>` and
	//! `encode` returns a `String`. To instead decode or encode into a buffer that
	//! you allocated, use one of the alternative methods:
	//!
	//! #### Decoding
	//!
	//! \| Method \| Output \| Allocates memory \|
	//! \| -------------------------- \| ----------------------------- \| ----------------------------- \|
	//! \| [`Engine::decode`] \| returns a new `Vec<u8>` \| always \|
	//! \| [`Engine::decode_vec`] \| appends to provided `Vec<u8>` \| if `Vec` lacks capacity \|
	//! \| [`Engine::decode_slice`] \| writes to provided `&[u8]` \| never
	//!
	//! #### Encoding
	//!
	//! \| Method \| Output \| Allocates memory \|
	//! \| -------------------------- \| ---------------------------- \| ------------------------------ \|
	//! \| [`Engine::encode`] \| returns a new `String` \| always \|
	//! \| [`Engine::encode_string`] \| appends to provided `String` \| if `String` lacks capacity \|
	//! \| [`Engine::encode_slice`] \| writes to provided `&[u8]` \| never \|
	//!
	//! ## Input and output
	//!
	//! The `base64` crate can [decode][Engine::decode()] and
	//! [encode][Engine::encode()] values in memory, or
	//! [`DecoderReader`][read::DecoderReader] and
	//! [`EncoderWriter`][write::EncoderWriter] provide streaming decoding and
	//! encoding for any [readable][std::io::Read] or [writable][std::io::Write]
	//! byte stream.
	//!
	//! #### Decoding
	//!
	#![cfg_attr(feature = "std", doc = "```")]
	#![cfg_attr(not(feature = "std"), doc = "```ignore")]
	//! # use std::io;
	//! use base64::{engine::general_purpose::STANDARD, read::DecoderReader};
	//!
	//! # fn main() -> Result<(), Box<dyn std::error::Error>> {
	//! let mut input = io::stdin();
	//! let mut decoder = DecoderReader::new(&mut input, &STANDARD);
	//! io::copy(&mut decoder, &mut io::stdout())?;
	//! # Ok(())
	//! # }
	//! ```
	//!
	//! #### Encoding
	//!
	#![cfg_attr(feature = "std", doc = "```")]
	#![cfg_attr(not(feature = "std"), doc = "```ignore")]
	//! # use std::io;
	//! use base64::{engine::general_purpose::STANDARD, write::EncoderWriter};
	//!
	//! # fn main() -> Result<(), Box<dyn std::error::Error>> {
	//! let mut output = io::stdout();
	//! let mut encoder = EncoderWriter::new(&mut output, &STANDARD);
	//! io::copy(&mut io::stdin(), &mut encoder)?;
	//! # Ok(())
	//! # }
	//! ```
	//!
	//! #### Display
	//!
	//! If you only need a base64 representation for implementing the
	//! [`Display`][std::fmt::Display] trait, use
	//! [`Base64Display`][display::Base64Display]:
	//!
	//! ```
	//! use base64::{display::Base64Display, engine::general_purpose::STANDARD};
	//!
	//! let value = Base64Display::new(b"\0\x01\x02\x03", &STANDARD);
	//! assert_eq!("base64: AAECAw==", format!("base64: {}", value));
	//! ```
	//!
	//! # Panics
	//!
	//! If length calculations result in overflowing `usize`, a panic will result.

	#![cfg_attr(feature = "cargo-clippy", allow(clippy::cast_lossless))]
	#![deny(
	missing_docs,
	trivial_casts,
	trivial_numeric_casts,
	unused_extern_crates,
	unused_import_braces,
	unused_results,
	variant_size_differences,
	warnings
	)]
	#![forbid(unsafe_code)]
	// Allow globally until https://github.com/rust-lang/rust-clippy/issues/8768 is resolved.
	// The desired state is to allow it only for the rstest_reuse import.
	#![allow(clippy::single_component_path_imports)]
	#![cfg_attr(not(any(feature = "std", test)), no_std)]

	#[cfg(any(feature = "alloc", test))]
	extern crate alloc;

	// has to be included at top level because of the way rstest_reuse defines its macros
	#[cfg(test)]
	use rstest_reuse;

	mod chunked_encoder;
	pub mod display;
	#[cfg(any(feature = "std", test))]
	pub mod read;
	#[cfg(any(feature = "std", test))]
	pub mod write;

	pub mod engine;
	pub use engine::Engine;

	pub mod alphabet;

	mod encode;
	#[allow(deprecated)]
	#[cfg(any(feature = "alloc", test))]
	pub use crate::encode::{encode, encode_engine, encode_engine_string};
	#[allow(deprecated)]
	pub use crate::encode::{encode_engine_slice, encoded_len, EncodeSliceError};

	mod decode;
	#[allow(deprecated)]
	#[cfg(any(feature = "alloc", test))]
	pub use crate::decode::{decode, decode_engine, decode_engine_vec};
	#[allow(deprecated)]
	pub use crate::decode::{decode_engine_slice, decoded_len_estimate, DecodeError, DecodeSliceError};

	pub mod prelude;

	#[cfg(test)]
	mod tests;

	const PAD_BYTE: u8 = b'=';