src/tools/rust-analyzer/lib/line-index/src/lib.rs

//! See [`LineIndex`].

#![deny(missing_debug_implementations, missing_docs, rust_2018_idioms)]

#[cfg(test)]
mod tests;

use nohash_hasher::IntMap;

pub use text_size::{TextRange, TextSize};

/// `(line, column)` information in the native, UTF-8 encoding.
#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
pub struct LineCol {
    /// Zero-based.
    pub line: u32,
    /// Zero-based UTF-8 offset.
    pub col: u32,
}

/// A kind of wide character encoding.
#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
#[non_exhaustive]
pub enum WideEncoding {
    /// UTF-16.
    Utf16,
    /// UTF-32.
    Utf32,
}

impl WideEncoding {
    /// Returns the number of code units it takes to encode `text` in this encoding.
    pub fn measure(&self, text: &str) -> usize {
        match self {
            WideEncoding::Utf16 => text.encode_utf16().count(),
            WideEncoding::Utf32 => text.chars().count(),
        }
    }
}

/// `(line, column)` information in wide encodings.
///
/// See [`WideEncoding`] for the kinds of wide encodings available.
//
// Deliberately not a generic type and different from `LineCol`.
#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
pub struct WideLineCol {
    /// Zero-based.
    pub line: u32,
    /// Zero-based.
    pub col: u32,
}

#[derive(Debug, Clone, Copy, PartialEq, Eq)]
struct WideChar {
    /// Start offset of a character inside a line, zero-based.
    start: TextSize,
    /// End offset of a character inside a line, zero-based.
    end: TextSize,
}

impl WideChar {
    /// Returns the length in 8-bit UTF-8 code units.
    fn len(&self) -> TextSize {
        self.end - self.start
    }

    /// Returns the length in UTF-16 or UTF-32 code units.
    fn wide_len(&self, enc: WideEncoding) -> u32 {
        match enc {
            WideEncoding::Utf16 => {
                if self.len() == TextSize::from(4) {
                    2
                } else {
                    1
                }
            }
            WideEncoding::Utf32 => 1,
        }
    }
}

/// Maps flat [`TextSize`] offsets to/from `(line, column)` representation.
#[derive(Debug, Clone, PartialEq, Eq)]
pub struct LineIndex {
    /// Offset the beginning of each line (except the first, which always has offset 0).
    newlines: Box<[TextSize]>,
    /// List of non-ASCII characters on each line.
    line_wide_chars: IntMap<u32, Box<[WideChar]>>,
    /// The length of the entire text.
    len: TextSize,
}

impl LineIndex {
    /// Returns a `LineIndex` for the `text`.
    pub fn new(text: &str) -> LineIndex {
        let (newlines, line_wide_chars) = analyze_source_file(text);
        LineIndex {
            newlines: newlines.into_boxed_slice(),
            line_wide_chars,
            len: TextSize::of(text),
        }
    }

    /// Transforms the `TextSize` into a `LineCol`.
    ///
    /// # Panics
    ///
    /// If the offset is invalid. See [`Self::try_line_col`].
    pub fn line_col(&self, offset: TextSize) -> LineCol {
        self.try_line_col(offset).expect("invalid offset")
    }

    /// Transforms the `TextSize` into a `LineCol`.
    ///
    /// Returns `None` if the `offset` was invalid, e.g. if it extends past the end of the text or
    /// points to the middle of a multi-byte character.
    pub fn try_line_col(&self, offset: TextSize) -> Option<LineCol> {
        if offset > self.len {
            return None;
        }
        let line = self.newlines.partition_point(|&it| it <= offset);
        let start = self.start_offset(line)?;
        let col = offset - start;
        let ret = LineCol { line: line as u32, col: col.into() };
        self.line_wide_chars
            .get(&ret.line)
            .into_iter()
            .flat_map(|it| it.iter())
            .all(|it| col <= it.start || it.end <= col)
            .then_some(ret)
    }

    /// Transforms the `LineCol` into a `TextSize`.
    pub fn offset(&self, line_col: LineCol) -> Option<TextSize> {
        self.start_offset(line_col.line as usize).map(|start| start + TextSize::from(line_col.col))
    }

    fn start_offset(&self, line: usize) -> Option<TextSize> {
        match line.checked_sub(1) {
            None => Some(TextSize::from(0)),
            Some(it) => self.newlines.get(it).copied(),
        }
    }

    /// Transforms the `LineCol` with the given `WideEncoding` into a `WideLineCol`.
    pub fn to_wide(&self, enc: WideEncoding, line_col: LineCol) -> Option<WideLineCol> {
        let mut col = line_col.col;
        if let Some(wide_chars) = self.line_wide_chars.get(&line_col.line) {
            for c in wide_chars.iter() {
                if u32::from(c.end) <= line_col.col {
                    col = col.checked_sub(u32::from(c.len()) - c.wide_len(enc))?;
                } else {
                    // From here on, all utf16 characters come *after* the character we are mapping,
                    // so we don't need to take them into account
                    break;
                }
            }
        }
        Some(WideLineCol { line: line_col.line, col })
    }

    /// Transforms the `WideLineCol` with the given `WideEncoding` into a `LineCol`.
    pub fn to_utf8(&self, enc: WideEncoding, line_col: WideLineCol) -> Option<LineCol> {
        let mut col = line_col.col;
        if let Some(wide_chars) = self.line_wide_chars.get(&line_col.line) {
            for c in wide_chars.iter() {
                if col > u32::from(c.start) {
                    col = col.checked_add(u32::from(c.len()) - c.wide_len(enc))?;
                } else {
                    // From here on, all utf16 characters come *after* the character we are mapping,
                    // so we don't need to take them into account
                    break;
                }
            }
        }
        Some(LineCol { line: line_col.line, col })
    }

    /// Given a range [start, end), returns a sorted iterator of non-empty ranges [start, x1), [x1,
    /// x2), ..., [xn, end) where all the xi, which are positions of newlines, are inside the range
    /// [start, end).
    pub fn lines(&self, range: TextRange) -> impl Iterator<Item = TextRange> + '_ {
        let lo = self.newlines.partition_point(|&it| it < range.start());
        let hi = self.newlines.partition_point(|&it| it <= range.end());
        let all = std::iter::once(range.start())
            .chain(self.newlines[lo..hi].iter().copied())
            .chain(std::iter::once(range.end()));

        all.clone()
            .zip(all.skip(1))
            .map(|(lo, hi)| TextRange::new(lo, hi))
            .filter(|it| !it.is_empty())
    }

    /// Returns the length of the original text.
    pub fn len(&self) -> TextSize {
        self.len
    }
}

/// This is adapted from the rustc_span crate, https://github.com/rust-lang/rust/blob/de59844c98f7925242a798a72c59dc3610dd0e2c/compiler/rustc_span/src/analyze_source_file.rs
fn analyze_source_file(src: &str) -> (Vec<TextSize>, IntMap<u32, Box<[WideChar]>>) {
    assert!(src.len() < !0u32 as usize);
    let mut lines = vec![];
    let mut line_wide_chars = IntMap::<u32, Vec<WideChar>>::default();

    // Calls the right implementation, depending on hardware support available.
    analyze_source_file_dispatch(src, &mut lines, &mut line_wide_chars);

    (lines, line_wide_chars.into_iter().map(|(k, v)| (k, v.into_boxed_slice())).collect())
}

#[cfg(any(target_arch = "x86", target_arch = "x86_64"))]
fn analyze_source_file_dispatch(
    src: &str,
    lines: &mut Vec<TextSize>,
    multi_byte_chars: &mut IntMap<u32, Vec<WideChar>>,
) {
    if is_x86_feature_detected!("sse2") {
        // SAFETY: SSE2 support was checked
        unsafe {
            analyze_source_file_sse2(src, lines, multi_byte_chars);
        }
    } else {
        analyze_source_file_generic(src, src.len(), TextSize::from(0), lines, multi_byte_chars);
    }
}

#[cfg(target_arch = "aarch64")]
fn analyze_source_file_dispatch(
    src: &str,
    lines: &mut Vec<TextSize>,
    multi_byte_chars: &mut IntMap<u32, Vec<WideChar>>,
) {
    if std::arch::is_aarch64_feature_detected!("neon") {
        // SAFETY: NEON support was checked
        unsafe {
            analyze_source_file_neon(src, lines, multi_byte_chars);
        }
    } else {
        analyze_source_file_generic(src, src.len(), TextSize::from(0), lines, multi_byte_chars);
    }
}

/// Checks 16 byte chunks of text at a time. If the chunk contains
/// something other than printable ASCII characters and newlines, the
/// function falls back to the generic implementation. Otherwise it uses
/// SSE2 intrinsics to quickly find all newlines.
#[target_feature(enable = "sse2")]
#[cfg(any(target_arch = "x86", target_arch = "x86_64"))]
unsafe fn analyze_source_file_sse2(
    src: &str,
    lines: &mut Vec<TextSize>,
    multi_byte_chars: &mut IntMap<u32, Vec<WideChar>>,
) {
    #[cfg(target_arch = "x86")]
    use std::arch::x86::*;
    #[cfg(target_arch = "x86_64")]
    use std::arch::x86_64::*;

    const CHUNK_SIZE: usize = 16;

    let src_bytes = src.as_bytes();

    let chunk_count = src.len() / CHUNK_SIZE;

    // This variable keeps track of where we should start decoding a
    // chunk. If a multi-byte character spans across chunk boundaries,
    // we need to skip that part in the next chunk because we already
    // handled it.
    let mut intra_chunk_offset = 0;

    for chunk_index in 0..chunk_count {
        let ptr = src_bytes.as_ptr() as *const __m128i;
        // We don't know if the pointer is aligned to 16 bytes, so we
        // use `loadu`, which supports unaligned loading.
        let chunk = _mm_loadu_si128(ptr.add(chunk_index));

        // For character in the chunk, see if its byte value is < 0, which
        // indicates that it's part of a UTF-8 char.
        let multibyte_test = _mm_cmplt_epi8(chunk, _mm_set1_epi8(0));
        // Create a bit mask from the comparison results.
        let multibyte_mask = _mm_movemask_epi8(multibyte_test);

        // If the bit mask is all zero, we only have ASCII chars here:
        if multibyte_mask == 0 {
            assert!(intra_chunk_offset == 0);

            // Check for newlines in the chunk
            let newlines_test = _mm_cmpeq_epi8(chunk, _mm_set1_epi8(b'\n' as i8));
            let newlines_mask = _mm_movemask_epi8(newlines_test);

            if newlines_mask != 0 {
                // All control characters are newlines, record them
                let mut newlines_mask = 0xFFFF0000 | newlines_mask as u32;
                let output_offset = TextSize::from((chunk_index * CHUNK_SIZE + 1) as u32);

                loop {
                    let index = newlines_mask.trailing_zeros();

                    if index >= CHUNK_SIZE as u32 {
                        // We have arrived at the end of the chunk.
                        break;
                    }

                    lines.push(TextSize::from(index) + output_offset);

                    // Clear the bit, so we can find the next one.
                    newlines_mask &= (!1) << index;
                }
            }
            continue;
        }

        // The slow path.
        // There are control chars in here, fallback to generic decoding.
        let scan_start = chunk_index * CHUNK_SIZE + intra_chunk_offset;
        intra_chunk_offset = analyze_source_file_generic(
            &src[scan_start..],
            CHUNK_SIZE - intra_chunk_offset,
            TextSize::from(scan_start as u32),
            lines,
            multi_byte_chars,
        );
    }

    // There might still be a tail left to analyze
    let tail_start = chunk_count * CHUNK_SIZE + intra_chunk_offset;
    if tail_start < src.len() {
        analyze_source_file_generic(
            &src[tail_start..],
            src.len() - tail_start,
            TextSize::from(tail_start as u32),
            lines,
            multi_byte_chars,
        );
    }
}

#[target_feature(enable = "neon")]
#[cfg(target_arch = "aarch64")]
#[inline]
// See https://community.arm.com/arm-community-blogs/b/infrastructure-solutions-blog/posts/porting-x86-vector-bitmask-optimizations-to-arm-neon
//
// The mask is a 64-bit integer, where each 4-bit corresponds to a u8 in the
// input vector. The least significant 4 bits correspond to the first byte in
// the vector.
unsafe fn move_mask(v: std::arch::aarch64::uint8x16_t) -> u64 {
    use std::arch::aarch64::*;

    let nibble_mask = vshrn_n_u16(vreinterpretq_u16_u8(v), 4);
    vget_lane_u64(vreinterpret_u64_u8(nibble_mask), 0)
}

#[target_feature(enable = "neon")]
#[cfg(target_arch = "aarch64")]
unsafe fn analyze_source_file_neon(
    src: &str,
    lines: &mut Vec<TextSize>,
    multi_byte_chars: &mut IntMap<u32, Vec<WideChar>>,
) {
    use std::arch::aarch64::*;

    const CHUNK_SIZE: usize = 16;

    let src_bytes = src.as_bytes();

    let chunk_count = src.len() / CHUNK_SIZE;

    let newline = vdupq_n_s8(b'\n' as i8);

    // This variable keeps track of where we should start decoding a
    // chunk. If a multi-byte character spans across chunk boundaries,
    // we need to skip that part in the next chunk because we already
    // handled it.
    let mut intra_chunk_offset = 0;

    for chunk_index in 0..chunk_count {
        let ptr = src_bytes.as_ptr() as *const i8;
        let chunk = vld1q_s8(ptr.add(chunk_index * CHUNK_SIZE));

        // For character in the chunk, see if its byte value is < 0, which
        // indicates that it's part of a UTF-8 char.
        let multibyte_test = vcltzq_s8(chunk);
        // Create a bit mask from the comparison results.
        let multibyte_mask = move_mask(multibyte_test);

        // If the bit mask is all zero, we only have ASCII chars here:
        if multibyte_mask == 0 {
            assert!(intra_chunk_offset == 0);

            // Check for newlines in the chunk
            let newlines_test = vceqq_s8(chunk, newline);
            let mut newlines_mask = move_mask(newlines_test);

            // If the bit mask is not all zero, there are newlines in this chunk.
            if newlines_mask != 0 {
                let output_offset = TextSize::from((chunk_index * CHUNK_SIZE + 1) as u32);

                while newlines_mask != 0 {
                    let trailing_zeros = newlines_mask.trailing_zeros();
                    let index = trailing_zeros / 4;

                    lines.push(TextSize::from(index) + output_offset);

                    // Clear the current 4-bit, so we can find the next one.
                    newlines_mask &= (!0xF) << trailing_zeros;
                }
            }
            continue;
        }

        let scan_start = chunk_index * CHUNK_SIZE + intra_chunk_offset;
        intra_chunk_offset = analyze_source_file_generic(
            &src[scan_start..],
            CHUNK_SIZE - intra_chunk_offset,
            TextSize::from(scan_start as u32),
            lines,
            multi_byte_chars,
        );
    }

    let tail_start = chunk_count * CHUNK_SIZE + intra_chunk_offset;
    if tail_start < src.len() {
        analyze_source_file_generic(
            &src[tail_start..],
            src.len() - tail_start,
            TextSize::from(tail_start as u32),
            lines,
            multi_byte_chars,
        );
    }
}

#[cfg(not(any(target_arch = "x86", target_arch = "x86_64", target_arch = "aarch64")))]
// The target (or compiler version) does not support SSE2 ...
fn analyze_source_file_dispatch(
    src: &str,
    lines: &mut Vec<TextSize>,
    multi_byte_chars: &mut IntMap<u32, Vec<WideChar>>,
) {
    analyze_source_file_generic(src, src.len(), TextSize::from(0), lines, multi_byte_chars);
}

// `scan_len` determines the number of bytes in `src` to scan. Note that the
// function can read past `scan_len` if a multi-byte character start within the
// range but extends past it. The overflow is returned by the function.
fn analyze_source_file_generic(
    src: &str,
    scan_len: usize,
    output_offset: TextSize,
    lines: &mut Vec<TextSize>,
    multi_byte_chars: &mut IntMap<u32, Vec<WideChar>>,
) -> usize {
    assert!(src.len() >= scan_len);
    let mut i = 0;
    let src_bytes = src.as_bytes();

    while i < scan_len {
        let byte = unsafe {
            // We verified that i < scan_len <= src.len()
            *src_bytes.get_unchecked(i)
        };

        // How much to advance in order to get to the next UTF-8 char in the
        // string.
        let mut char_len = 1;

        if byte == b'\n' {
            lines.push(TextSize::from(i as u32 + 1) + output_offset);
        } else if byte >= 127 {
            // The slow path: Just decode to `char`.
            let c = src[i..].chars().next().unwrap();
            char_len = c.len_utf8();

            // The last element of `lines` represents the offset of the start of
            // current line. To get the offset inside the line, we subtract it.
            let pos = TextSize::from(i as u32) + output_offset
                - lines.last().unwrap_or(&TextSize::default());

            if char_len > 1 {
                assert!((2..=4).contains(&char_len));
                let mbc = WideChar { start: pos, end: pos + TextSize::from(char_len as u32) };
                multi_byte_chars.entry(lines.len() as u32).or_default().push(mbc);
            }
        }

        i += char_len;
    }

    i - scan_len
}