blob: b51dafbeb7ad8641f9ce6c653ee8918cb3a283e2 [file] [log] [blame]
#!/bin/bash
# Copyright 2017 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Quiet by default
set +x
echo
echo === Vulkan Validation Layers Tests ===
echo Running test script: build-android/test_APK.sh
echo
#
# Parse parameters
#
function printUsage {
echo "Supported parameters are:"
echo " -p|--platform <platform> (optional)"
echo " -f|--filter <gtest filter list> (optional)"
echo " -s|--serial <target device serial number> (optional)"
echo " -a|--abi <target abi> (optional)"
echo
echo "i.e. ${0##*/} -p <platform> -f <test filter> -s <serial number>"
exit 1
}
if [[ $(($# % 2)) -ne 0 ]]
then
echo Parameters must be provided in pairs.
echo parameter count = $#
echo
printUsage
exit 1
fi
while [[ $# -gt 0 ]]
do
case $1 in
-p|--platform)
platform="$2"
shift 2
;;
-f|--filter)
filter="$2"
shift 2
;;
-s|--serial)
serial="$2"
shift 2
;;
-a|--abi)
abi="$2"
shift 2
;;
-*)
# unknown option
echo Unknown option: $1
echo
printUsage
exit 1
;;
esac
done
if [[ $serial ]]; then
serialFlag="-s $serial"
if [[ $(adb devices) != *"$serial"* ]]
then
echo Device not found: "${serial}"
echo
printUsage
exit 1
fi
else
echo Using device $(adb get-serialno)
fi
if [[ -z $platform ]]
then
echo No platform specified.
platform="UnspecifiedPlatform"
fi
if [[ -z $filter ]]
then
echo No filter specified, running all tests.
filter="*"
fi
if [[ $platform ]]; then echo platform = "${platform}"; fi
if [[ $filter ]]; then echo filter = "${filter}"; fi
if [[ $serial ]]; then echo serial = "${serial}"; fi
if [[ $abi ]]; then echo abi = "${abi}"; fi
set -e
echo
echo Setting up...
#
# Start up
#
# Wake up the device
adb $serialFlag shell input keyevent "KEYCODE_MENU"
adb $serialFlag shell input keyevent "KEYCODE_HOME"
# Grab our Android test mutex
# Wait for any existing test runs on the devices
# Blow away the lock if tests run too long, avoiding infinite loop
lock_seconds=1200 # Duration in seconds.
lock_end_time=$(( $(date +%s) + lock_seconds )) # Calculate end time.
until mkdir /var/tmp/VkLayerValidationTests.$serial.lock
do
sleep 5
echo "Waiting for existing Android test to complete on $serial"
if [ $(date +%s) -gt $lock_end_time ]
then
echo "Lock timeout reached: $lock_seconds seconds"
echo "Deleting /var/tmp/VkLayerValidationTests.$serial.lock"
rm -r /var/tmp/VkLayerValidationTests.$serial.lock
fi
done
# Clean up our lock on any exit condition
function finish {
rm -r /var/tmp/VkLayerValidationTests.$serial.lock
}
trap finish EXIT
# Clear the log
adb $serialFlag logcat -c
# Ensure any previous activity has stopped, otherwise it won't run tests
adb $serialFlag shell am force-stop com.example.VulkanLayerValidationTests
# Remove any existing APK that may have been installed from another host
# Disable exit on error in case the APK is not present
set +e
adb $serialFlag shell pm list packages | grep com.example.VulkanLayerValidationTests
if [ $? -eq 0 ]
then
adb $serialFlag uninstall com.example.VulkanLayerValidationTests
fi
# Re-enable exit on error
set -e
echo
echo Installing ./bin/VulkanLayerValidationTests.apk...
# Install the current build
if [[ -z $abi ]]
then
adb $serialFlag install -r bin/VulkanLayerValidationTests.apk
else
adb $serialFlag install --abi $abi -r bin/VulkanLayerValidationTests.apk
fi
echo
echo Launching tests...
# Kick off the tests with known expection list
adb $serialFlag shell am start -a android.intent.action.MAIN -c android-intent.category.LAUNCH -n com.example.VulkanLayerValidationTests/android.app.NativeActivity --es args --gtest_filter="${filter}"
#
# Scrape the log until we get pass/fail/crash
#
# The following loop will give tests 20 minutes to pass/fail/crash
seconds=1200 # Duration in seconds.
endTime=$(( $(date +%s) + seconds )) # Calculate end time.
exitCode=-1;
# Disable exit on error, we expect grep to fail multiple times in this loop
set +e
while [ $(date +%s) -lt $endTime ]; do # Loop until interval has elapsed.
# The following line is printed from android_main on success
adb $serialFlag logcat -d | grep "==== Tests PASSED ===="
if [ $? -eq 0 ]
then
echo
echo VulkanLayerValidationTests PASSED!
echo
exitCode=0
break
fi
# The following line is printed from android_main on failure
adb $serialFlag logcat -d | grep "==== Tests FAILED ===="
if [ $? -eq 0 ]
then
echo
echo VulkanLayerValidationTests FAILED!
echo
exitCode=1
break
fi
# developer.android.com recommends searching for the following string to detect native crash
adb $serialFlag logcat -d | grep "\*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\* \*\*\*"
if [ $? -eq 0 ]
then
exitCode=2
echo
echo VulkanLayerValidationTests CRASHED!
echo
break
fi
sleep 5
done
# Re-enable exit on error
set -e
if [ $exitCode -eq -1 ]
then
echo "VulkanLayerValidationTests hasn't completed in $seconds seconds. Script exiting."
fi
#
# Cleanup
#
# Return to home screen to clear any error pop-ups
adb $serialFlag shell input keyevent "KEYCODE_HOME"
# Stop the activity
adb $serialFlag shell am force-stop com.example.VulkanLayerValidationTests
echo
echo Fetching test output and filtered logcat text...
# Avoid characters that are illegal in Windows filenames, so these
# files can be archived to a Windows host system for later reference
today=$(date +%Y%m%d-%H%M%S)
outFile="VulkanLayerValidationTests.$platform.$today.out.txt"
errFile="VulkanLayerValidationTests.$platform.$today.err.txt"
logFile="VulkanLayerValidationTests.$platform.$today.logcat.txt"
adb $serialFlag pull /sdcard/Android/data/com.example.VulkanLayerValidationTests/files/out.txt $outFile
adb $serialFlag pull /sdcard/Android/data/com.example.VulkanLayerValidationTests/files/err.txt $errFile
adb $serialFlag logcat -d | grep VulkanLayerValidationTests > $logFile
if [ -f $outFile ]; then
echo $outFile size $(wc -c < $outFile)
fi
if [ -f $errFile ]; then
echo $errFile size $(wc -c < $errFile)
fi
if [ -f $logFile ]; then
echo $logFile size $(wc -c < $logFile)
fi
if [ $exitCode -ne 0 ]
then
echo
echo VulkanLayerValidationTests result status is unsuccessful. Dumping test output file:
echo =========================================================================================
cat $outFile
echo =========================================================================================
echo
echo
echo Dumping logcat text, filtered by ''"VulkanLayerValidationTests"'':
echo =========================================================================================
cat $logFile
echo =========================================================================================
fi
exit $exitCode