| # THIS IS A GENERATED FILE |
| # DO NOT HAND-EDIT |
| # |
| # See Porting/config_h.pl |
| |
| : Set up for generating config_h.SH |
| case "$CONFIG_SH" in |
| '') CONFIG_SH=config.sh;; |
| esac |
| case "$CONFIG_H" in |
| '') CONFIG_H=config.h;; |
| esac |
| case $PERL_CONFIG_SH in |
| '') |
| if test -f $CONFIG_SH; then TOP=.; |
| elif test -f ../$CONFIG_SH; then TOP=..; |
| elif test -f ../../$CONFIG_SH; then TOP=../..; |
| elif test -f ../../../$CONFIG_SH; then TOP=../../..; |
| elif test -f ../../../../$CONFIG_SH; then TOP=../../../..; |
| else |
| echo "Can't find $CONFIG_SH."; exit 1 |
| fi |
| . $TOP/$CONFIG_SH |
| ;; |
| esac |
| case "$0" in |
| */*) cd `expr X$0 : 'X\(.*\)/'` ;; |
| esac |
| case "$CONFIG_H" in |
| already-done) echo "Not re-extracting config.h" ;; |
| *) |
| echo "Extracting $CONFIG_H (with variable substitutions)" |
| sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-def!#undef!' |
| /* This file was produced by running the config_h.SH script, which |
| * gets its values from $CONFIG_SH, which is generally produced by |
| * running Configure. |
| * |
| * Feel free to modify any of this as the need arises. Note, however, |
| * that running config_h.SH again will wipe out any changes you've made. |
| * For a more permanent change edit $CONFIG_SH and rerun config_h.SH. |
| */ |
| |
| /* Package name : $package |
| * Source directory : $src |
| * Configuration time: $cf_time |
| * Configured by : $cf_by |
| * Target system : $myuname |
| */ |
| |
| #ifndef _config_h_ |
| #define _config_h_ |
| |
| /* LOC_SED: |
| * This symbol holds the complete pathname to the sed program. |
| */ |
| #define LOC_SED "$full_sed" /**/ |
| |
| /* HAS_ALARM: |
| * This symbol, if defined, indicates that the alarm routine is |
| * available. |
| */ |
| #$d_alarm HAS_ALARM /**/ |
| |
| /* HAS_BCMP: |
| * This symbol is defined if the bcmp() routine is available to |
| * compare blocks of memory. |
| */ |
| #$d_bcmp HAS_BCMP /**/ |
| |
| /* HAS_BCOPY: |
| * This symbol is defined if the bcopy() routine is available to |
| * copy blocks of memory. |
| */ |
| #$d_bcopy HAS_BCOPY /**/ |
| |
| /* HAS_BZERO: |
| * This symbol is defined if the bzero() routine is available to |
| * set a memory block to 0. |
| */ |
| #$d_bzero HAS_BZERO /**/ |
| |
| /* HAS_CHOWN: |
| * This symbol, if defined, indicates that the chown routine is |
| * available. |
| */ |
| #$d_chown HAS_CHOWN /**/ |
| |
| /* HAS_CHROOT: |
| * This symbol, if defined, indicates that the chroot routine is |
| * available. |
| */ |
| #$d_chroot HAS_CHROOT /**/ |
| |
| /* HAS_CHSIZE: |
| * This symbol, if defined, indicates that the chsize routine is available |
| * to truncate files. You might need a -lx to get this routine. |
| */ |
| #$d_chsize HAS_CHSIZE /**/ |
| |
| /* HAS_CRYPT: |
| * This symbol, if defined, indicates that the crypt routine is available |
| * to encrypt passwords and the like. |
| */ |
| #$d_crypt HAS_CRYPT /**/ |
| |
| /* HAS_CTERMID: |
| * This symbol, if defined, indicates that the ctermid routine is |
| * available to generate filename for terminal. |
| */ |
| #$d_ctermid HAS_CTERMID /**/ |
| |
| /* HAS_CUSERID: |
| * This symbol, if defined, indicates that the cuserid routine is |
| * available to get character login names. |
| */ |
| #$d_cuserid HAS_CUSERID /**/ |
| |
| /* HAS_DBL_DIG: |
| * This symbol, if defined, indicates that this system's <float.h> |
| * or <limits.h> defines the symbol DBL_DIG, which is the number |
| * of significant digits in a double precision number. If this |
| * symbol is not defined, a guess of 15 is usually pretty good. |
| */ |
| #$d_dbl_dig HAS_DBL_DIG /**/ |
| |
| /* HAS_DIFFTIME: |
| * This symbol, if defined, indicates that the difftime routine is |
| * available. |
| */ |
| #$d_difftime HAS_DIFFTIME /**/ |
| |
| /* HAS_DLERROR: |
| * This symbol, if defined, indicates that the dlerror routine is |
| * available to return a string describing the last error that |
| * occurred from a call to dlopen(), dlclose() or dlsym(). |
| */ |
| #$d_dlerror HAS_DLERROR /**/ |
| |
| /* HAS_DUP2: |
| * This symbol, if defined, indicates that the dup2 routine is |
| * available to duplicate file descriptors. |
| */ |
| #$d_dup2 HAS_DUP2 /**/ |
| |
| /* HAS_FCHMOD: |
| * This symbol, if defined, indicates that the fchmod routine is available |
| * to change mode of opened files. If unavailable, use chmod(). |
| */ |
| #$d_fchmod HAS_FCHMOD /**/ |
| |
| /* HAS_FCHOWN: |
| * This symbol, if defined, indicates that the fchown routine is available |
| * to change ownership of opened files. If unavailable, use chown(). |
| */ |
| #$d_fchown HAS_FCHOWN /**/ |
| |
| /* HAS_FCNTL: |
| * This symbol, if defined, indicates to the C program that |
| * the fcntl() function exists. |
| */ |
| #$d_fcntl HAS_FCNTL /**/ |
| |
| /* HAS_FGETPOS: |
| * This symbol, if defined, indicates that the fgetpos routine is |
| * available to get the file position indicator, similar to ftell(). |
| */ |
| #$d_fgetpos HAS_FGETPOS /**/ |
| |
| /* HAS_FLOCK: |
| * This symbol, if defined, indicates that the flock routine is |
| * available to do file locking. |
| */ |
| #$d_flock HAS_FLOCK /**/ |
| |
| /* HAS_FORK: |
| * This symbol, if defined, indicates that the fork routine is |
| * available. |
| */ |
| #$d_fork HAS_FORK /**/ |
| |
| /* HAS_FSETPOS: |
| * This symbol, if defined, indicates that the fsetpos routine is |
| * available to set the file position indicator, similar to fseek(). |
| */ |
| #$d_fsetpos HAS_FSETPOS /**/ |
| |
| /* HAS_GETTIMEOFDAY: |
| * This symbol, if defined, indicates that the gettimeofday() system |
| * call is available for a sub-second accuracy clock. Usually, the file |
| * <sys/resource.h> needs to be included (see I_SYS_RESOURCE). |
| * The type "Timeval" should be used to refer to "struct timeval". |
| */ |
| #$d_gettimeod HAS_GETTIMEOFDAY /**/ |
| #ifdef HAS_GETTIMEOFDAY |
| #define Timeval struct timeval /* Structure used by gettimeofday() */ |
| #endif |
| |
| /* HAS_GETGROUPS: |
| * This symbol, if defined, indicates that the getgroups() routine is |
| * available to get the list of process groups. If unavailable, multiple |
| * groups are probably not supported. |
| */ |
| #$d_getgrps HAS_GETGROUPS /**/ |
| |
| /* HAS_GETLOGIN: |
| * This symbol, if defined, indicates that the getlogin routine is |
| * available to get the login name. |
| */ |
| #$d_getlogin HAS_GETLOGIN /**/ |
| |
| /* HAS_GETPGID: |
| * This symbol, if defined, indicates to the C program that |
| * the getpgid(pid) function is available to get the |
| * process group id. |
| */ |
| #$d_getpgid HAS_GETPGID /**/ |
| |
| /* HAS_GETPGRP2: |
| * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) |
| * routine is available to get the current process group. |
| */ |
| #$d_getpgrp2 HAS_GETPGRP2 /**/ |
| |
| /* HAS_GETPPID: |
| * This symbol, if defined, indicates that the getppid routine is |
| * available to get the parent process ID. |
| */ |
| #$d_getppid HAS_GETPPID /**/ |
| |
| /* HAS_GETPRIORITY: |
| * This symbol, if defined, indicates that the getpriority routine is |
| * available to get a process's priority. |
| */ |
| #$d_getprior HAS_GETPRIORITY /**/ |
| |
| /* HAS_INET_ATON: |
| * This symbol, if defined, indicates to the C program that the |
| * inet_aton() function is available to parse IP address "dotted-quad" |
| * strings. |
| */ |
| #$d_inetaton HAS_INET_ATON /**/ |
| |
| /* HAS_KILLPG: |
| * This symbol, if defined, indicates that the killpg routine is available |
| * to kill process groups. If unavailable, you probably should use kill |
| * with a negative process number. |
| */ |
| #$d_killpg HAS_KILLPG /**/ |
| |
| /* HAS_LINK: |
| * This symbol, if defined, indicates that the link routine is |
| * available to create hard links. |
| */ |
| #$d_link HAS_LINK /**/ |
| |
| /* HAS_LOCALECONV: |
| * This symbol, if defined, indicates that the localeconv routine is |
| * available for numeric and monetary formatting conventions. |
| */ |
| #$d_locconv HAS_LOCALECONV /**/ |
| |
| /* HAS_LOCKF: |
| * This symbol, if defined, indicates that the lockf routine is |
| * available to do file locking. |
| */ |
| #$d_lockf HAS_LOCKF /**/ |
| |
| /* HAS_LSTAT: |
| * This symbol, if defined, indicates that the lstat routine is |
| * available to do file stats on symbolic links. |
| */ |
| #$d_lstat HAS_LSTAT /**/ |
| |
| /* HAS_MBLEN: |
| * This symbol, if defined, indicates that the mblen routine is available |
| * to find the number of bytes in a multibye character. |
| */ |
| #$d_mblen HAS_MBLEN /**/ |
| |
| /* HAS_MBSTOWCS: |
| * This symbol, if defined, indicates that the mbstowcs routine is |
| * available to covert a multibyte string into a wide character string. |
| */ |
| #$d_mbstowcs HAS_MBSTOWCS /**/ |
| |
| /* HAS_MBTOWC: |
| * This symbol, if defined, indicates that the mbtowc routine is available |
| * to covert a multibyte to a wide character. |
| */ |
| #$d_mbtowc HAS_MBTOWC /**/ |
| |
| /* HAS_MEMCMP: |
| * This symbol, if defined, indicates that the memcmp routine is available |
| * to compare blocks of memory. |
| */ |
| #$d_memcmp HAS_MEMCMP /**/ |
| |
| /* HAS_MEMCPY: |
| * This symbol, if defined, indicates that the memcpy routine is available |
| * to copy blocks of memory. |
| */ |
| #$d_memcpy HAS_MEMCPY /**/ |
| |
| /* HAS_MEMMOVE: |
| * This symbol, if defined, indicates that the memmove routine is available |
| * to copy potentially overlapping blocks of memory. This should be used |
| * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your |
| * own version. |
| */ |
| #$d_memmove HAS_MEMMOVE /**/ |
| |
| /* HAS_MEMSET: |
| * This symbol, if defined, indicates that the memset routine is available |
| * to set blocks of memory. |
| */ |
| #$d_memset HAS_MEMSET /**/ |
| |
| /* HAS_MKDIR: |
| * This symbol, if defined, indicates that the mkdir routine is available |
| * to create directories. Otherwise you should fork off a new process to |
| * exec /bin/mkdir. |
| */ |
| #$d_mkdir HAS_MKDIR /**/ |
| |
| /* HAS_MKFIFO: |
| * This symbol, if defined, indicates that the mkfifo routine is |
| * available to create FIFOs. Otherwise, mknod should be able to |
| * do it for you. However, if mkfifo is there, mknod might require |
| * super-user privileges which mkfifo will not. |
| */ |
| #$d_mkfifo HAS_MKFIFO /**/ |
| |
| /* HAS_MKTIME: |
| * This symbol, if defined, indicates that the mktime routine is |
| * available. |
| */ |
| #$d_mktime HAS_MKTIME /**/ |
| |
| /* HAS_MSYNC: |
| * This symbol, if defined, indicates that the msync system call is |
| * available to synchronize a mapped file. |
| */ |
| #$d_msync HAS_MSYNC /**/ |
| |
| /* HAS_MUNMAP: |
| * This symbol, if defined, indicates that the munmap system call is |
| * available to unmap a region, usually mapped by mmap(). |
| */ |
| #$d_munmap HAS_MUNMAP /**/ |
| |
| /* HAS_NICE: |
| * This symbol, if defined, indicates that the nice routine is |
| * available. |
| */ |
| #$d_nice HAS_NICE /**/ |
| |
| /* HAS_PATHCONF: |
| * This symbol, if defined, indicates that pathconf() is available |
| * to determine file-system related limits and options associated |
| * with a given filename. |
| */ |
| /* HAS_FPATHCONF: |
| * This symbol, if defined, indicates that pathconf() is available |
| * to determine file-system related limits and options associated |
| * with a given open file descriptor. |
| */ |
| #$d_pathconf HAS_PATHCONF /**/ |
| #$d_fpathconf HAS_FPATHCONF /**/ |
| |
| /* HAS_PAUSE: |
| * This symbol, if defined, indicates that the pause routine is |
| * available to suspend a process until a signal is received. |
| */ |
| #$d_pause HAS_PAUSE /**/ |
| |
| /* HAS_PIPE: |
| * This symbol, if defined, indicates that the pipe routine is |
| * available to create an inter-process channel. |
| */ |
| #$d_pipe HAS_PIPE /**/ |
| |
| /* HAS_POLL: |
| * This symbol, if defined, indicates that the poll routine is |
| * available to poll active file descriptors. Please check I_POLL and |
| * I_SYS_POLL to know which header should be included as well. |
| */ |
| #$d_poll HAS_POLL /**/ |
| |
| /* HAS_READDIR: |
| * This symbol, if defined, indicates that the readdir routine is |
| * available to read directory entries. You may have to include |
| * <dirent.h>. See I_DIRENT. |
| */ |
| #$d_readdir HAS_READDIR /**/ |
| |
| /* HAS_SEEKDIR: |
| * This symbol, if defined, indicates that the seekdir routine is |
| * available. You may have to include <dirent.h>. See I_DIRENT. |
| */ |
| #$d_seekdir HAS_SEEKDIR /**/ |
| |
| /* HAS_TELLDIR: |
| * This symbol, if defined, indicates that the telldir routine is |
| * available. You may have to include <dirent.h>. See I_DIRENT. |
| */ |
| #$d_telldir HAS_TELLDIR /**/ |
| |
| /* HAS_REWINDDIR: |
| * This symbol, if defined, indicates that the rewinddir routine is |
| * available. You may have to include <dirent.h>. See I_DIRENT. |
| */ |
| #$d_rewinddir HAS_REWINDDIR /**/ |
| |
| /* HAS_READLINK: |
| * This symbol, if defined, indicates that the readlink routine is |
| * available to read the value of a symbolic link. |
| */ |
| #$d_readlink HAS_READLINK /**/ |
| |
| /* HAS_RENAME: |
| * This symbol, if defined, indicates that the rename routine is available |
| * to rename files. Otherwise you should do the unlink(), link(), unlink() |
| * trick. |
| */ |
| #$d_rename HAS_RENAME /**/ |
| |
| /* HAS_RMDIR: |
| * This symbol, if defined, indicates that the rmdir routine is |
| * available to remove directories. Otherwise you should fork off a |
| * new process to exec /bin/rmdir. |
| */ |
| #$d_rmdir HAS_RMDIR /**/ |
| |
| /* HAS_SELECT: |
| * This symbol, if defined, indicates that the select routine is |
| * available to select active file descriptors. If the timeout field |
| * is used, <sys/time.h> may need to be included. |
| */ |
| #$d_select HAS_SELECT /**/ |
| |
| /* HAS_SETEGID: |
| * This symbol, if defined, indicates that the setegid routine is available |
| * to change the effective gid of the current program. |
| */ |
| #$d_setegid HAS_SETEGID /**/ |
| |
| /* HAS_SETEUID: |
| * This symbol, if defined, indicates that the seteuid routine is available |
| * to change the effective uid of the current program. |
| */ |
| #$d_seteuid HAS_SETEUID /**/ |
| |
| /* HAS_SETGROUPS: |
| * This symbol, if defined, indicates that the setgroups() routine is |
| * available to set the list of process groups. If unavailable, multiple |
| * groups are probably not supported. |
| */ |
| #$d_setgrps HAS_SETGROUPS /**/ |
| |
| /* HAS_SETLINEBUF: |
| * This symbol, if defined, indicates that the setlinebuf routine is |
| * available to change stderr or stdout from block-buffered or unbuffered |
| * to a line-buffered mode. |
| */ |
| #$d_setlinebuf HAS_SETLINEBUF /**/ |
| |
| /* HAS_SETLOCALE: |
| * This symbol, if defined, indicates that the setlocale routine is |
| * available to handle locale-specific ctype implementations. |
| */ |
| #$d_setlocale HAS_SETLOCALE /**/ |
| |
| /* HAS_SETPGID: |
| * This symbol, if defined, indicates that the setpgid(pid, gpid) |
| * routine is available to set process group ID. |
| */ |
| #$d_setpgid HAS_SETPGID /**/ |
| |
| /* HAS_SETPGRP2: |
| * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) |
| * routine is available to set the current process group. |
| */ |
| #$d_setpgrp2 HAS_SETPGRP2 /**/ |
| |
| /* HAS_SETPRIORITY: |
| * This symbol, if defined, indicates that the setpriority routine is |
| * available to set a process's priority. |
| */ |
| #$d_setprior HAS_SETPRIORITY /**/ |
| |
| /* HAS_SETREGID: |
| * This symbol, if defined, indicates that the setregid routine is |
| * available to change the real and effective gid of the current |
| * process. |
| */ |
| /* HAS_SETRESGID: |
| * This symbol, if defined, indicates that the setresgid routine is |
| * available to change the real, effective and saved gid of the current |
| * process. |
| */ |
| #$d_setregid HAS_SETREGID /**/ |
| #$d_setresgid HAS_SETRESGID /**/ |
| |
| /* HAS_SETREUID: |
| * This symbol, if defined, indicates that the setreuid routine is |
| * available to change the real and effective uid of the current |
| * process. |
| */ |
| /* HAS_SETRESUID: |
| * This symbol, if defined, indicates that the setresuid routine is |
| * available to change the real, effective and saved uid of the current |
| * process. |
| */ |
| #$d_setreuid HAS_SETREUID /**/ |
| #$d_setresuid HAS_SETRESUID /**/ |
| |
| /* HAS_SETRGID: |
| * This symbol, if defined, indicates that the setrgid routine is available |
| * to change the real gid of the current program. |
| */ |
| #$d_setrgid HAS_SETRGID /**/ |
| |
| /* HAS_SETRUID: |
| * This symbol, if defined, indicates that the setruid routine is available |
| * to change the real uid of the current program. |
| */ |
| #$d_setruid HAS_SETRUID /**/ |
| |
| /* HAS_SETSID: |
| * This symbol, if defined, indicates that the setsid routine is |
| * available to set the process group ID. |
| */ |
| #$d_setsid HAS_SETSID /**/ |
| |
| /* HAS_STRCHR: |
| * This symbol is defined to indicate that the strchr()/strrchr() |
| * functions are available for string searching. If not, try the |
| * index()/rindex() pair. |
| */ |
| /* HAS_INDEX: |
| * This symbol is defined to indicate that the index()/rindex() |
| * functions are available for string searching. |
| */ |
| #$d_strchr HAS_STRCHR /**/ |
| #$d_index HAS_INDEX /**/ |
| |
| /* HAS_STRCOLL: |
| * This symbol, if defined, indicates that the strcoll routine is |
| * available to compare strings using collating information. |
| */ |
| #$d_strcoll HAS_STRCOLL /**/ |
| |
| /* HAS_STRTOD: |
| * This symbol, if defined, indicates that the strtod routine is |
| * available to provide better numeric string conversion than atof(). |
| */ |
| #$d_strtod HAS_STRTOD /**/ |
| |
| /* HAS_STRTOL: |
| * This symbol, if defined, indicates that the strtol routine is available |
| * to provide better numeric string conversion than atoi() and friends. |
| */ |
| #$d_strtol HAS_STRTOL /**/ |
| |
| /* HAS_STRXFRM: |
| * This symbol, if defined, indicates that the strxfrm() routine is |
| * available to transform strings. |
| */ |
| #$d_strxfrm HAS_STRXFRM /**/ |
| |
| /* HAS_SYMLINK: |
| * This symbol, if defined, indicates that the symlink routine is available |
| * to create symbolic links. |
| */ |
| #$d_symlink HAS_SYMLINK /**/ |
| |
| /* HAS_SYSCALL: |
| * This symbol, if defined, indicates that the syscall routine is |
| * available to call arbitrary system calls. If undefined, that's tough. |
| */ |
| #$d_syscall HAS_SYSCALL /**/ |
| |
| /* HAS_SYSCONF: |
| * This symbol, if defined, indicates that sysconf() is available |
| * to determine system related limits and options. |
| */ |
| #$d_sysconf HAS_SYSCONF /**/ |
| |
| /* HAS_SYSTEM: |
| * This symbol, if defined, indicates that the system routine is |
| * available to issue a shell command. |
| */ |
| #$d_system HAS_SYSTEM /**/ |
| |
| /* HAS_TCGETPGRP: |
| * This symbol, if defined, indicates that the tcgetpgrp routine is |
| * available to get foreground process group ID. |
| */ |
| #$d_tcgetpgrp HAS_TCGETPGRP /**/ |
| |
| /* HAS_TCSETPGRP: |
| * This symbol, if defined, indicates that the tcsetpgrp routine is |
| * available to set foreground process group ID. |
| */ |
| #$d_tcsetpgrp HAS_TCSETPGRP /**/ |
| |
| /* HAS_TRUNCATE: |
| * This symbol, if defined, indicates that the truncate routine is |
| * available to truncate files. |
| */ |
| #$d_truncate HAS_TRUNCATE /**/ |
| |
| /* HAS_TZNAME: |
| * This symbol, if defined, indicates that the tzname[] array is |
| * available to access timezone names. |
| */ |
| #$d_tzname HAS_TZNAME /**/ |
| |
| /* HAS_UMASK: |
| * This symbol, if defined, indicates that the umask routine is |
| * available to set and get the value of the file creation mask. |
| */ |
| #$d_umask HAS_UMASK /**/ |
| |
| /* HAS_USLEEP: |
| * This symbol, if defined, indicates that the usleep routine is |
| * available to let the process sleep on a sub-second accuracy. |
| */ |
| #$d_usleep HAS_USLEEP /**/ |
| |
| /* HAS_WAIT4: |
| * This symbol, if defined, indicates that wait4() exists. |
| */ |
| #$d_wait4 HAS_WAIT4 /**/ |
| |
| /* HAS_WAITPID: |
| * This symbol, if defined, indicates that the waitpid routine is |
| * available to wait for child process. |
| */ |
| #$d_waitpid HAS_WAITPID /**/ |
| |
| /* HAS_WCSTOMBS: |
| * This symbol, if defined, indicates that the wcstombs routine is |
| * available to convert wide character strings to multibyte strings. |
| */ |
| #$d_wcstombs HAS_WCSTOMBS /**/ |
| |
| /* HAS_WCTOMB: |
| * This symbol, if defined, indicates that the wctomb routine is available |
| * to covert a wide character to a multibyte. |
| */ |
| #$d_wctomb HAS_WCTOMB /**/ |
| |
| /* Groups_t: |
| * This symbol holds the type used for the second argument to |
| * getgroups() and setgroups(). Usually, this is the same as |
| * gidtype (gid_t) , but sometimes it isn't. |
| * It can be int, ushort, gid_t, etc... |
| * It may be necessary to include <sys/types.h> to get any |
| * typedef'ed information. This is only required if you have |
| * getgroups() or setgroups().. |
| */ |
| #if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) |
| #define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */ |
| #endif |
| |
| /* I_ARPA_INET: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <arpa/inet.h> to get inet_addr and friends declarations. |
| */ |
| #$i_arpainet I_ARPA_INET /**/ |
| |
| /* I_DBM: |
| * This symbol, if defined, indicates that <dbm.h> exists and should |
| * be included. |
| */ |
| /* I_RPCSVC_DBM: |
| * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and |
| * should be included. |
| */ |
| #$i_dbm I_DBM /**/ |
| #$i_rpcsvcdbm I_RPCSVC_DBM /**/ |
| |
| /* I_DLFCN: |
| * This symbol, if defined, indicates that <dlfcn.h> exists and should |
| * be included. |
| */ |
| #$i_dlfcn I_DLFCN /**/ |
| |
| /* I_FCNTL: |
| * This manifest constant tells the C program to include <fcntl.h>. |
| */ |
| #$i_fcntl I_FCNTL /**/ |
| |
| /* I_FLOAT: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <float.h> to get definition of symbols like DBL_MAX or |
| * DBL_MIN, i.e. machine dependent floating point values. |
| */ |
| #$i_float I_FLOAT /**/ |
| |
| /* I_GDBM: |
| * This symbol, if defined, indicates that <gdbm.h> exists and should |
| * be included. |
| */ |
| #$i_gdbm I_GDBM /**/ |
| |
| /* I_LIMITS: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <limits.h> to get definition of symbols like WORD_BIT or |
| * LONG_MAX, i.e. machine dependant limitations. |
| */ |
| #$i_limits I_LIMITS /**/ |
| |
| /* I_LOCALE: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <locale.h>. |
| */ |
| #$i_locale I_LOCALE /**/ |
| |
| /* I_MATH: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <math.h>. |
| */ |
| #$i_math I_MATH /**/ |
| |
| /* I_MEMORY: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <memory.h>. |
| */ |
| #$i_memory I_MEMORY /**/ |
| |
| /* I_NETINET_IN: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <netinet/in.h>. Otherwise, you may try <sys/in.h>. |
| */ |
| #$i_niin I_NETINET_IN /**/ |
| |
| /* I_SFIO: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sfio.h>. |
| */ |
| #$i_sfio I_SFIO /**/ |
| |
| /* I_STDDEF: |
| * This symbol, if defined, indicates that <stddef.h> exists and should |
| * be included. |
| */ |
| #$i_stddef I_STDDEF /**/ |
| |
| /* I_STDLIB: |
| * This symbol, if defined, indicates that <stdlib.h> exists and should |
| * be included. |
| */ |
| #$i_stdlib I_STDLIB /**/ |
| |
| /* I_STRING: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <string.h> (USG systems) instead of <strings.h> (BSD systems). |
| */ |
| #$i_string I_STRING /**/ |
| |
| /* I_SYS_DIR: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/dir.h>. |
| */ |
| #$i_sysdir I_SYS_DIR /**/ |
| |
| /* I_SYS_FILE: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/file.h> to get definition of R_OK and friends. |
| */ |
| #$i_sysfile I_SYS_FILE /**/ |
| |
| /* I_SYS_IOCTL: |
| * This symbol, if defined, indicates that <sys/ioctl.h> exists and should |
| * be included. Otherwise, include <sgtty.h> or <termio.h>. |
| */ |
| /* I_SYS_SOCKIO: |
| * This symbol, if defined, indicates the <sys/sockio.h> should be included |
| * to get socket ioctl options, like SIOCATMARK. |
| */ |
| #$i_sysioctl I_SYS_IOCTL /**/ |
| #$i_syssockio I_SYS_SOCKIO /**/ |
| |
| /* I_SYS_NDIR: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/ndir.h>. |
| */ |
| #$i_sysndir I_SYS_NDIR /**/ |
| |
| /* I_SYS_PARAM: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/param.h>. |
| */ |
| #$i_sysparam I_SYS_PARAM /**/ |
| |
| /* I_SYS_POLL: |
| * This symbol, if defined, indicates that the program may include |
| * <sys/poll.h>. When I_POLL is also defined, it's probably safest |
| * to only include <poll.h>. |
| */ |
| #$i_syspoll I_SYS_POLL /**/ |
| |
| /* I_SYS_RESOURCE: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/resource.h>. |
| */ |
| #$i_sysresrc I_SYS_RESOURCE /**/ |
| |
| /* I_SYS_SELECT: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/select.h> in order to get definition of struct timeval. |
| */ |
| #$i_sysselct I_SYS_SELECT /**/ |
| |
| /* I_SYS_STAT: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/stat.h>. |
| */ |
| #$i_sysstat I_SYS_STAT /**/ |
| |
| /* I_SYS_TIMES: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/times.h>. |
| */ |
| #$i_systimes I_SYS_TIMES /**/ |
| |
| /* I_SYS_TYPES: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/types.h>. |
| */ |
| #$i_systypes I_SYS_TYPES /**/ |
| |
| /* I_SYS_UN: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/un.h> to get UNIX domain socket definitions. |
| */ |
| #$i_sysun I_SYS_UN /**/ |
| |
| /* I_SYS_WAIT: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/wait.h>. |
| */ |
| #$i_syswait I_SYS_WAIT /**/ |
| |
| /* I_TERMIO: |
| * This symbol, if defined, indicates that the program should include |
| * <termio.h> rather than <sgtty.h>. There are also differences in |
| * the ioctl() calls that depend on the value of this symbol. |
| */ |
| /* I_TERMIOS: |
| * This symbol, if defined, indicates that the program should include |
| * the POSIX termios.h rather than sgtty.h or termio.h. |
| * There are also differences in the ioctl() calls that depend on the |
| * value of this symbol. |
| */ |
| /* I_SGTTY: |
| * This symbol, if defined, indicates that the program should include |
| * <sgtty.h> rather than <termio.h>. There are also differences in |
| * the ioctl() calls that depend on the value of this symbol. |
| */ |
| #$i_termio I_TERMIO /**/ |
| #$i_termios I_TERMIOS /**/ |
| #$i_sgtty I_SGTTY /**/ |
| |
| /* I_UNISTD: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <unistd.h>. |
| */ |
| #$i_unistd I_UNISTD /**/ |
| |
| /* I_UTIME: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <utime.h>. |
| */ |
| #$i_utime I_UTIME /**/ |
| |
| /* I_VALUES: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <values.h> to get definition of symbols like MINFLOAT or |
| * MAXLONG, i.e. machine dependant limitations. Probably, you |
| * should use <limits.h> instead, if it is available. |
| */ |
| #$i_values I_VALUES /**/ |
| |
| /* I_VFORK: |
| * This symbol, if defined, indicates to the C program that it should |
| * include vfork.h. |
| */ |
| #$i_vfork I_VFORK /**/ |
| |
| /* CAN_VAPROTO: |
| * This variable is defined on systems supporting prototype declaration |
| * of functions with a variable number of arguments. |
| */ |
| /* _V: |
| * This macro is used to declare function parameters in prototypes for |
| * functions with a variable number of parameters. Use double parentheses. |
| * For example: |
| * |
| * int printf _V((char *fmt, ...)); |
| * |
| * Remember to use the plain simple _() macro when declaring a function |
| * with no variable number of arguments, since it might be possible to |
| * have a non-effect _V() macro and still get prototypes via _(). |
| */ |
| #$vaproto CAN_VAPROTO /**/ |
| #ifdef CAN_VAPROTO |
| #define _V(args) args |
| #else |
| #define _V(args) () |
| #endif |
| |
| /* OSNAME: |
| * This symbol contains the name of the operating system, as determined |
| * by Configure. You shouldn't rely on it too much; the specific |
| * feature tests from Configure are generally more reliable. |
| */ |
| /* OSVERS: |
| * This symbol contains the version of the operating system, as determined |
| * by Configure. You shouldn't rely on it too much; the specific |
| * feature tests from Configure are generally more reliable. |
| */ |
| #define OSNAME "$osname" /**/ |
| #define OSVERS "$osvers" /**/ |
| |
| /* USE_CROSS_COMPILE: |
| * This symbol, if defined, indicates that Perl is being cross-compiled. |
| */ |
| /* PERL_TARGETARCH: |
| * This symbol, if defined, indicates the target architecture |
| * Perl has been cross-compiled to. Undefined if not a cross-compile. |
| */ |
| #ifndef USE_CROSS_COMPILE |
| #$usecrosscompile USE_CROSS_COMPILE /**/ |
| #define PERL_TARGETARCH "$targetarch" /**/ |
| #endif |
| |
| /* MULTIARCH: |
| * This symbol, if defined, signifies that the build |
| * process will produce some binary files that are going to be |
| * used in a cross-platform environment. This is the case for |
| * example with the NeXT "fat" binaries that contain executables |
| * for several CPUs. |
| */ |
| #$multiarch MULTIARCH /**/ |
| |
| /* MEM_ALIGNBYTES: |
| * This symbol contains the number of bytes required to align a |
| * double, or a long double when applicable. Usual values are 2, |
| * 4 and 8. The default is eight, for safety. |
| */ |
| #if defined(USE_CROSS_COMPILE) || defined(MULTIARCH) |
| # define MEM_ALIGNBYTES 8 |
| #else |
| #define MEM_ALIGNBYTES $alignbytes |
| #endif |
| |
| /* ARCHLIB: |
| * This variable, if defined, holds the name of the directory in |
| * which the user wants to put architecture-dependent public |
| * library files for $package. It is most often a local directory |
| * such as /usr/local/lib. Programs using this variable must be |
| * prepared to deal with filename expansion. If ARCHLIB is the |
| * same as PRIVLIB, it is not defined, since presumably the |
| * program already searches PRIVLIB. |
| */ |
| /* ARCHLIB_EXP: |
| * This symbol contains the ~name expanded version of ARCHLIB, to be used |
| * in programs that are not prepared to deal with ~ expansion at run-time. |
| */ |
| #$d_archlib ARCHLIB "$archlib" /**/ |
| #$d_archlib ARCHLIB_EXP "$archlibexp" /**/ |
| |
| /* ARCHNAME: |
| * This symbol holds a string representing the architecture name. |
| * It may be used to construct an architecture-dependant pathname |
| * where library files may be held under a private library, for |
| * instance. |
| */ |
| #define ARCHNAME "$archname" /**/ |
| |
| /* BIN: |
| * This symbol holds the path of the bin directory where the package will |
| * be installed. Program must be prepared to deal with ~name substitution. |
| */ |
| /* BIN_EXP: |
| * This symbol is the filename expanded version of the BIN symbol, for |
| * programs that do not want to deal with that at run-time. |
| */ |
| /* PERL_RELOCATABLE_INC: |
| * This symbol, if defined, indicates that we'd like to relocate entries |
| * in @INC at run time based on the location of the perl binary. |
| */ |
| #define BIN "$bin" /**/ |
| #define BIN_EXP "$binexp" /**/ |
| #$userelocatableinc PERL_RELOCATABLE_INC /**/ |
| |
| /* INTSIZE: |
| * This symbol contains the value of sizeof(int) so that the C |
| * preprocessor can make decisions based on it. |
| */ |
| /* LONGSIZE: |
| * This symbol contains the value of sizeof(long) so that the C |
| * preprocessor can make decisions based on it. |
| */ |
| /* SHORTSIZE: |
| * This symbol contains the value of sizeof(short) so that the C |
| * preprocessor can make decisions based on it. |
| */ |
| #define INTSIZE $intsize /**/ |
| #define LONGSIZE $longsize /**/ |
| #define SHORTSIZE $shortsize /**/ |
| |
| /* BYTEORDER: |
| * This symbol holds the hexadecimal constant defined in byteorder, |
| * in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc... |
| * If the compiler supports cross-compiling or multiple-architecture |
| * binaries (eg. on NeXT systems), use compiler-defined macros to |
| * determine the byte order. |
| * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture |
| * Binaries (MAB) on either big endian or little endian machines. |
| * The endian-ness is available at compile-time. This only matters |
| * for perl, where the config.h can be generated and installed on |
| * one system, and used by a different architecture to build an |
| * extension. Older versions of NeXT that might not have |
| * defined either *_ENDIAN__ were all on Motorola 680x0 series, |
| * so the default case (for NeXT) is big endian to catch them. |
| * This might matter for NeXT 3.0. |
| */ |
| #if defined(USE_CROSS_COMPILE) || defined(MULTIARCH) |
| # ifdef __LITTLE_ENDIAN__ |
| # if LONGSIZE == 4 |
| # define BYTEORDER 0x1234 |
| # else |
| # if LONGSIZE == 8 |
| # define BYTEORDER 0x12345678 |
| # endif |
| # endif |
| # else |
| # ifdef __BIG_ENDIAN__ |
| # if LONGSIZE == 4 |
| # define BYTEORDER 0x4321 |
| # else |
| # if LONGSIZE == 8 |
| # define BYTEORDER 0x87654321 |
| # endif |
| # endif |
| # endif |
| # endif |
| # if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__)) |
| # define BYTEORDER 0x4321 |
| # endif |
| #else |
| #define BYTEORDER 0x$byteorder /* large digits for MSB */ |
| #endif /* NeXT */ |
| |
| /* CHARBITS: |
| * This symbol contains the size of a char, so that the C preprocessor |
| * can make decisions based on it. |
| */ |
| #define CHARBITS $charbits /**/ |
| |
| /* CAT2: |
| * This macro concatenates 2 tokens together. |
| */ |
| /* STRINGIFY: |
| * This macro surrounds its token with double quotes. |
| */ |
| #if $cpp_stuff == 1 |
| #define CAT2(a,b) a/**/b |
| #define STRINGIFY(a) "a" |
| #endif |
| #if $cpp_stuff == 42 |
| #define PeRl_CaTiFy(a, b) a ## b |
| #define PeRl_StGiFy(a) #a |
| #define CAT2(a,b) PeRl_CaTiFy(a,b) |
| #define StGiFy(a) PeRl_StGiFy(a) |
| #define STRINGIFY(a) PeRl_StGiFy(a) |
| #endif |
| #if $cpp_stuff != 1 && $cpp_stuff != 42 |
| #include "Bletch: How does this C preprocessor concatenate tokens?" |
| #endif |
| |
| /* CPPSTDIN: |
| * This symbol contains the first part of the string which will invoke |
| * the C preprocessor on the standard input and produce to standard |
| * output. Typical value of "cc -E" or "/lib/cpp", but it can also |
| * call a wrapper. See CPPRUN. |
| */ |
| /* CPPMINUS: |
| * This symbol contains the second part of the string which will invoke |
| * the C preprocessor on the standard input and produce to standard |
| * output. This symbol will have the value "-" if CPPSTDIN needs a minus |
| * to specify standard input, otherwise the value is "". |
| */ |
| /* CPPRUN: |
| * This symbol contains the string which will invoke a C preprocessor on |
| * the standard input and produce to standard output. It needs to end |
| * with CPPLAST, after all other preprocessor flags have been specified. |
| * The main difference with CPPSTDIN is that this program will never be a |
| * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is |
| * available directly to the user. Note that it may well be different from |
| * the preprocessor used to compile the C program. |
| */ |
| /* CPPLAST: |
| * This symbol is intended to be used along with CPPRUN in the same manner |
| * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". |
| */ |
| #define CPPSTDIN "$cppstdin" |
| #define CPPMINUS "$cppminus" |
| #define CPPRUN "$cpprun" |
| #define CPPLAST "$cpplast" |
| |
| /* HAS_ACCESS: |
| * This manifest constant lets the C program know that the access() |
| * system call is available to check for accessibility using real UID/GID. |
| * (always present on UNIX.) |
| */ |
| #$d_access HAS_ACCESS /**/ |
| |
| /* HAS_ACCESSX: |
| * This symbol, if defined, indicates that the accessx routine is |
| * available to do extended access checks. |
| */ |
| #$d_accessx HAS_ACCESSX /**/ |
| |
| /* HAS_ASCTIME_R: |
| * This symbol, if defined, indicates that the asctime_r routine |
| * is available to asctime re-entrantly. |
| */ |
| /* ASCTIME_R_PROTO: |
| * This symbol encodes the prototype of asctime_r. |
| * It is zero if d_asctime_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r |
| * is defined. |
| */ |
| #$d_asctime_r HAS_ASCTIME_R /**/ |
| #define ASCTIME_R_PROTO $asctime_r_proto /**/ |
| |
| /* HASATTRIBUTE_FORMAT: |
| * Can we handle GCC attribute for checking printf-style formats |
| */ |
| /* PRINTF_FORMAT_NULL_OK: |
| * Allows __printf__ format to be null when checking printf-style |
| */ |
| /* HASATTRIBUTE_MALLOC: |
| * Can we handle GCC attribute for malloc-style functions. |
| */ |
| /* HASATTRIBUTE_NONNULL: |
| * Can we handle GCC attribute for nonnull function parms. |
| */ |
| /* HASATTRIBUTE_NORETURN: |
| * Can we handle GCC attribute for functions that do not return |
| */ |
| /* HASATTRIBUTE_PURE: |
| * Can we handle GCC attribute for pure functions |
| */ |
| /* HASATTRIBUTE_UNUSED: |
| * Can we handle GCC attribute for unused variables and arguments |
| */ |
| /* HASATTRIBUTE_DEPRECATED: |
| * Can we handle GCC attribute for marking deprecated APIs |
| */ |
| /* HASATTRIBUTE_WARN_UNUSED_RESULT: |
| * Can we handle GCC attribute for warning on unused results |
| */ |
| #$d_attribute_deprecated HASATTRIBUTE_DEPRECATED /**/ |
| #$d_attribute_format HASATTRIBUTE_FORMAT /**/ |
| #$d_printf_format_null PRINTF_FORMAT_NULL_OK /**/ |
| #$d_attribute_noreturn HASATTRIBUTE_NORETURN /**/ |
| #$d_attribute_malloc HASATTRIBUTE_MALLOC /**/ |
| #$d_attribute_nonnull HASATTRIBUTE_NONNULL /**/ |
| #$d_attribute_pure HASATTRIBUTE_PURE /**/ |
| #$d_attribute_unused HASATTRIBUTE_UNUSED /**/ |
| #$d_attribute_warn_unused_result HASATTRIBUTE_WARN_UNUSED_RESULT /**/ |
| |
| /* CASTI32: |
| * This symbol is defined if the C compiler can cast negative |
| * or large floating point numbers to 32-bit ints. |
| */ |
| #$d_casti32 CASTI32 /**/ |
| |
| /* CASTNEGFLOAT: |
| * This symbol is defined if the C compiler can cast negative |
| * numbers to unsigned longs, ints and shorts. |
| */ |
| /* CASTFLAGS: |
| * This symbol contains flags that say what difficulties the compiler |
| * has casting odd floating values to unsigned long: |
| * 0 = ok |
| * 1 = couldn't cast < 0 |
| * 2 = couldn't cast >= 0x80000000 |
| * 4 = couldn't cast in argument expression list |
| */ |
| #$d_castneg CASTNEGFLOAT /**/ |
| #define CASTFLAGS $castflags /**/ |
| |
| /* VOID_CLOSEDIR: |
| * This symbol, if defined, indicates that the closedir() routine |
| * does not return a value. |
| */ |
| #$d_void_closedir VOID_CLOSEDIR /**/ |
| |
| /* HASCONST: |
| * This symbol, if defined, indicates that this C compiler knows about |
| * the const type. There is no need to actually test for that symbol |
| * within your programs. The mere use of the "const" keyword will |
| * trigger the necessary tests. |
| */ |
| #$d_const HASCONST /**/ |
| #ifndef HASCONST |
| #define const |
| #endif |
| |
| /* HAS_CRYPT_R: |
| * This symbol, if defined, indicates that the crypt_r routine |
| * is available to crypt re-entrantly. |
| */ |
| /* CRYPT_R_PROTO: |
| * This symbol encodes the prototype of crypt_r. |
| * It is zero if d_crypt_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r |
| * is defined. |
| */ |
| #$d_crypt_r HAS_CRYPT_R /**/ |
| #define CRYPT_R_PROTO $crypt_r_proto /**/ |
| |
| /* HAS_CSH: |
| * This symbol, if defined, indicates that the C-shell exists. |
| */ |
| /* CSH: |
| * This symbol, if defined, contains the full pathname of csh. |
| */ |
| #$d_csh HAS_CSH /**/ |
| #ifdef HAS_CSH |
| #define CSH "$full_csh" /**/ |
| #endif |
| |
| /* HAS_CTERMID_R: |
| * This symbol, if defined, indicates that the ctermid_r routine |
| * is available to ctermid re-entrantly. |
| */ |
| /* CTERMID_R_PROTO: |
| * This symbol encodes the prototype of ctermid_r. |
| * It is zero if d_ctermid_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctermid_r |
| * is defined. |
| */ |
| #$d_ctermid_r HAS_CTERMID_R /**/ |
| #define CTERMID_R_PROTO $ctermid_r_proto /**/ |
| |
| /* HAS_CTIME_R: |
| * This symbol, if defined, indicates that the ctime_r routine |
| * is available to ctime re-entrantly. |
| */ |
| /* CTIME_R_PROTO: |
| * This symbol encodes the prototype of ctime_r. |
| * It is zero if d_ctime_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r |
| * is defined. |
| */ |
| #$d_ctime_r HAS_CTIME_R /**/ |
| #define CTIME_R_PROTO $ctime_r_proto /**/ |
| |
| /* SETUID_SCRIPTS_ARE_SECURE_NOW: |
| * This symbol, if defined, indicates that the bug that prevents |
| * setuid scripts from being secure is not present in this kernel. |
| */ |
| /* DOSUID: |
| * This symbol, if defined, indicates that the C program should |
| * check the script that it is executing for setuid/setgid bits, and |
| * attempt to emulate setuid/setgid on systems that have disabled |
| * setuid #! scripts because the kernel can't do it securely. |
| * It is up to the package designer to make sure that this emulation |
| * is done securely. Among other things, it should do an fstat on |
| * the script it just opened to make sure it really is a setuid/setgid |
| * script, it should make sure the arguments passed correspond exactly |
| * to the argument on the #! line, and it should not trust any |
| * subprocesses to which it must pass the filename rather than the |
| * file descriptor of the script to be executed. |
| */ |
| #$d_suidsafe SETUID_SCRIPTS_ARE_SECURE_NOW /**/ |
| #$d_dosuid DOSUID /**/ |
| |
| /* HAS_DRAND48_R: |
| * This symbol, if defined, indicates that the drand48_r routine |
| * is available to drand48 re-entrantly. |
| */ |
| /* DRAND48_R_PROTO: |
| * This symbol encodes the prototype of drand48_r. |
| * It is zero if d_drand48_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r |
| * is defined. |
| */ |
| #$d_drand48_r HAS_DRAND48_R /**/ |
| #define DRAND48_R_PROTO $drand48_r_proto /**/ |
| |
| /* HAS_DRAND48_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the drand48() function. Otherwise, it is up |
| * to the program to supply one. A good guess is |
| * extern double drand48(void); |
| */ |
| #$d_drand48proto HAS_DRAND48_PROTO /**/ |
| |
| /* HAS_EACCESS: |
| * This symbol, if defined, indicates that the eaccess routine is |
| * available to do extended access checks. |
| */ |
| #$d_eaccess HAS_EACCESS /**/ |
| |
| /* HAS_ENDGRENT: |
| * This symbol, if defined, indicates that the getgrent routine is |
| * available for finalizing sequential access of the group database. |
| */ |
| #$d_endgrent HAS_ENDGRENT /**/ |
| |
| /* HAS_ENDGRENT_R: |
| * This symbol, if defined, indicates that the endgrent_r routine |
| * is available to endgrent re-entrantly. |
| */ |
| /* ENDGRENT_R_PROTO: |
| * This symbol encodes the prototype of endgrent_r. |
| * It is zero if d_endgrent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r |
| * is defined. |
| */ |
| #$d_endgrent_r HAS_ENDGRENT_R /**/ |
| #define ENDGRENT_R_PROTO $endgrent_r_proto /**/ |
| |
| /* HAS_ENDHOSTENT: |
| * This symbol, if defined, indicates that the endhostent() routine is |
| * available to close whatever was being used for host queries. |
| */ |
| #$d_endhent HAS_ENDHOSTENT /**/ |
| |
| /* HAS_ENDHOSTENT_R: |
| * This symbol, if defined, indicates that the endhostent_r routine |
| * is available to endhostent re-entrantly. |
| */ |
| /* ENDHOSTENT_R_PROTO: |
| * This symbol encodes the prototype of endhostent_r. |
| * It is zero if d_endhostent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endhostent_r |
| * is defined. |
| */ |
| #$d_endhostent_r HAS_ENDHOSTENT_R /**/ |
| #define ENDHOSTENT_R_PROTO $endhostent_r_proto /**/ |
| |
| /* HAS_ENDNETENT: |
| * This symbol, if defined, indicates that the endnetent() routine is |
| * available to close whatever was being used for network queries. |
| */ |
| #$d_endnent HAS_ENDNETENT /**/ |
| |
| /* HAS_ENDNETENT_R: |
| * This symbol, if defined, indicates that the endnetent_r routine |
| * is available to endnetent re-entrantly. |
| */ |
| /* ENDNETENT_R_PROTO: |
| * This symbol encodes the prototype of endnetent_r. |
| * It is zero if d_endnetent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endnetent_r |
| * is defined. |
| */ |
| #$d_endnetent_r HAS_ENDNETENT_R /**/ |
| #define ENDNETENT_R_PROTO $endnetent_r_proto /**/ |
| |
| /* HAS_ENDPROTOENT: |
| * This symbol, if defined, indicates that the endprotoent() routine is |
| * available to close whatever was being used for protocol queries. |
| */ |
| #$d_endpent HAS_ENDPROTOENT /**/ |
| |
| /* HAS_ENDPROTOENT_R: |
| * This symbol, if defined, indicates that the endprotoent_r routine |
| * is available to endprotoent re-entrantly. |
| */ |
| /* ENDPROTOENT_R_PROTO: |
| * This symbol encodes the prototype of endprotoent_r. |
| * It is zero if d_endprotoent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endprotoent_r |
| * is defined. |
| */ |
| #$d_endprotoent_r HAS_ENDPROTOENT_R /**/ |
| #define ENDPROTOENT_R_PROTO $endprotoent_r_proto /**/ |
| |
| /* HAS_ENDPWENT: |
| * This symbol, if defined, indicates that the getgrent routine is |
| * available for finalizing sequential access of the passwd database. |
| */ |
| #$d_endpwent HAS_ENDPWENT /**/ |
| |
| /* HAS_ENDPWENT_R: |
| * This symbol, if defined, indicates that the endpwent_r routine |
| * is available to endpwent re-entrantly. |
| */ |
| /* ENDPWENT_R_PROTO: |
| * This symbol encodes the prototype of endpwent_r. |
| * It is zero if d_endpwent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r |
| * is defined. |
| */ |
| #$d_endpwent_r HAS_ENDPWENT_R /**/ |
| #define ENDPWENT_R_PROTO $endpwent_r_proto /**/ |
| |
| /* HAS_ENDSERVENT: |
| * This symbol, if defined, indicates that the endservent() routine is |
| * available to close whatever was being used for service queries. |
| */ |
| #$d_endsent HAS_ENDSERVENT /**/ |
| |
| /* HAS_ENDSERVENT_R: |
| * This symbol, if defined, indicates that the endservent_r routine |
| * is available to endservent re-entrantly. |
| */ |
| /* ENDSERVENT_R_PROTO: |
| * This symbol encodes the prototype of endservent_r. |
| * It is zero if d_endservent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endservent_r |
| * is defined. |
| */ |
| #$d_endservent_r HAS_ENDSERVENT_R /**/ |
| #define ENDSERVENT_R_PROTO $endservent_r_proto /**/ |
| |
| /* HAS_FD_SET: |
| * This symbol, when defined, indicates presence of the fd_set typedef |
| * in <sys/types.h> |
| */ |
| #$d_fd_set HAS_FD_SET /**/ |
| |
| /* FLEXFILENAMES: |
| * This symbol, if defined, indicates that the system supports filenames |
| * longer than 14 characters. |
| */ |
| #$d_flexfnam FLEXFILENAMES /**/ |
| |
| /* Gconvert: |
| * This preprocessor macro is defined to convert a floating point |
| * number to a string without a trailing decimal point. This |
| * emulates the behavior of sprintf("%g"), but is sometimes much more |
| * efficient. If gconvert() is not available, but gcvt() drops the |
| * trailing decimal point, then gcvt() is used. If all else fails, |
| * a macro using sprintf("%g") is used. Arguments for the Gconvert |
| * macro are: value, number of digits, whether trailing zeros should |
| * be retained, and the output buffer. |
| * The usual values are: |
| * d_Gconvert='gconvert((x),(n),(t),(b))' |
| * d_Gconvert='gcvt((x),(n),(b))' |
| * d_Gconvert='sprintf((b),"%.*g",(n),(x))' |
| * The last two assume trailing zeros should not be kept. |
| */ |
| #define Gconvert(x,n,t,b) $d_Gconvert |
| |
| /* HAS_GETGRENT: |
| * This symbol, if defined, indicates that the getgrent routine is |
| * available for sequential access of the group database. |
| */ |
| #$d_getgrent HAS_GETGRENT /**/ |
| |
| /* HAS_GETGRENT_R: |
| * This symbol, if defined, indicates that the getgrent_r routine |
| * is available to getgrent re-entrantly. |
| */ |
| /* GETGRENT_R_PROTO: |
| * This symbol encodes the prototype of getgrent_r. |
| * It is zero if d_getgrent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r |
| * is defined. |
| */ |
| #$d_getgrent_r HAS_GETGRENT_R /**/ |
| #define GETGRENT_R_PROTO $getgrent_r_proto /**/ |
| |
| /* HAS_GETGRGID_R: |
| * This symbol, if defined, indicates that the getgrgid_r routine |
| * is available to getgrgid re-entrantly. |
| */ |
| /* GETGRGID_R_PROTO: |
| * This symbol encodes the prototype of getgrgid_r. |
| * It is zero if d_getgrgid_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r |
| * is defined. |
| */ |
| #$d_getgrgid_r HAS_GETGRGID_R /**/ |
| #define GETGRGID_R_PROTO $getgrgid_r_proto /**/ |
| |
| /* HAS_GETGRNAM_R: |
| * This symbol, if defined, indicates that the getgrnam_r routine |
| * is available to getgrnam re-entrantly. |
| */ |
| /* GETGRNAM_R_PROTO: |
| * This symbol encodes the prototype of getgrnam_r. |
| * It is zero if d_getgrnam_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r |
| * is defined. |
| */ |
| #$d_getgrnam_r HAS_GETGRNAM_R /**/ |
| #define GETGRNAM_R_PROTO $getgrnam_r_proto /**/ |
| |
| /* HAS_GETHOSTBYADDR: |
| * This symbol, if defined, indicates that the gethostbyaddr() routine is |
| * available to look up hosts by their IP addresses. |
| */ |
| #$d_gethbyaddr HAS_GETHOSTBYADDR /**/ |
| |
| /* HAS_GETHOSTBYNAME: |
| * This symbol, if defined, indicates that the gethostbyname() routine is |
| * available to look up host names in some data base or other. |
| */ |
| #$d_gethbyname HAS_GETHOSTBYNAME /**/ |
| |
| /* HAS_GETHOSTENT: |
| * This symbol, if defined, indicates that the gethostent() routine is |
| * available to look up host names in some data base or another. |
| */ |
| #$d_gethent HAS_GETHOSTENT /**/ |
| |
| /* HAS_GETHOSTNAME: |
| * This symbol, if defined, indicates that the C program may use the |
| * gethostname() routine to derive the host name. See also HAS_UNAME |
| * and PHOSTNAME. |
| */ |
| /* HAS_UNAME: |
| * This symbol, if defined, indicates that the C program may use the |
| * uname() routine to derive the host name. See also HAS_GETHOSTNAME |
| * and PHOSTNAME. |
| */ |
| /* PHOSTNAME: |
| * This symbol, if defined, indicates the command to feed to the |
| * popen() routine to derive the host name. See also HAS_GETHOSTNAME |
| * and HAS_UNAME. Note that the command uses a fully qualified path, |
| * so that it is safe even if used by a process with super-user |
| * privileges. |
| */ |
| /* HAS_PHOSTNAME: |
| * This symbol, if defined, indicates that the C program may use the |
| * contents of PHOSTNAME as a command to feed to the popen() routine |
| * to derive the host name. |
| */ |
| #$d_gethname HAS_GETHOSTNAME /**/ |
| #$d_uname HAS_UNAME /**/ |
| #$d_phostname HAS_PHOSTNAME /**/ |
| #ifdef HAS_PHOSTNAME |
| #define PHOSTNAME "$aphostname" /* How to get the host name */ |
| #endif |
| |
| /* HAS_GETHOSTBYADDR_R: |
| * This symbol, if defined, indicates that the gethostbyaddr_r routine |
| * is available to gethostbyaddr re-entrantly. |
| */ |
| /* GETHOSTBYADDR_R_PROTO: |
| * This symbol encodes the prototype of gethostbyaddr_r. |
| * It is zero if d_gethostbyaddr_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyaddr_r |
| * is defined. |
| */ |
| #$d_gethostbyaddr_r HAS_GETHOSTBYADDR_R /**/ |
| #define GETHOSTBYADDR_R_PROTO $gethostbyaddr_r_proto /**/ |
| |
| /* HAS_GETHOSTBYNAME_R: |
| * This symbol, if defined, indicates that the gethostbyname_r routine |
| * is available to gethostbyname re-entrantly. |
| */ |
| /* GETHOSTBYNAME_R_PROTO: |
| * This symbol encodes the prototype of gethostbyname_r. |
| * It is zero if d_gethostbyname_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyname_r |
| * is defined. |
| */ |
| #$d_gethostbyname_r HAS_GETHOSTBYNAME_R /**/ |
| #define GETHOSTBYNAME_R_PROTO $gethostbyname_r_proto /**/ |
| |
| /* HAS_GETHOSTENT_R: |
| * This symbol, if defined, indicates that the gethostent_r routine |
| * is available to gethostent re-entrantly. |
| */ |
| /* GETHOSTENT_R_PROTO: |
| * This symbol encodes the prototype of gethostent_r. |
| * It is zero if d_gethostent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostent_r |
| * is defined. |
| */ |
| #$d_gethostent_r HAS_GETHOSTENT_R /**/ |
| #define GETHOSTENT_R_PROTO $gethostent_r_proto /**/ |
| |
| /* HAS_GETHOST_PROTOS: |
| * This symbol, if defined, indicates that <netdb.h> includes |
| * prototypes for gethostent(), gethostbyname(), and |
| * gethostbyaddr(). Otherwise, it is up to the program to guess |
| * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
| */ |
| #$d_gethostprotos HAS_GETHOST_PROTOS /**/ |
| |
| /* HAS_GETLOGIN_R: |
| * This symbol, if defined, indicates that the getlogin_r routine |
| * is available to getlogin re-entrantly. |
| */ |
| /* GETLOGIN_R_PROTO: |
| * This symbol encodes the prototype of getlogin_r. |
| * It is zero if d_getlogin_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r |
| * is defined. |
| */ |
| #$d_getlogin_r HAS_GETLOGIN_R /**/ |
| #define GETLOGIN_R_PROTO $getlogin_r_proto /**/ |
| |
| /* HAS_GETNETBYADDR: |
| * This symbol, if defined, indicates that the getnetbyaddr() routine is |
| * available to look up networks by their IP addresses. |
| */ |
| #$d_getnbyaddr HAS_GETNETBYADDR /**/ |
| |
| /* HAS_GETNETBYNAME: |
| * This symbol, if defined, indicates that the getnetbyname() routine is |
| * available to look up networks by their names. |
| */ |
| #$d_getnbyname HAS_GETNETBYNAME /**/ |
| |
| /* HAS_GETNETENT: |
| * This symbol, if defined, indicates that the getnetent() routine is |
| * available to look up network names in some data base or another. |
| */ |
| #$d_getnent HAS_GETNETENT /**/ |
| |
| /* HAS_GETNETBYADDR_R: |
| * This symbol, if defined, indicates that the getnetbyaddr_r routine |
| * is available to getnetbyaddr re-entrantly. |
| */ |
| /* GETNETBYADDR_R_PROTO: |
| * This symbol encodes the prototype of getnetbyaddr_r. |
| * It is zero if d_getnetbyaddr_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyaddr_r |
| * is defined. |
| */ |
| #$d_getnetbyaddr_r HAS_GETNETBYADDR_R /**/ |
| #define GETNETBYADDR_R_PROTO $getnetbyaddr_r_proto /**/ |
| |
| /* HAS_GETNETBYNAME_R: |
| * This symbol, if defined, indicates that the getnetbyname_r routine |
| * is available to getnetbyname re-entrantly. |
| */ |
| /* GETNETBYNAME_R_PROTO: |
| * This symbol encodes the prototype of getnetbyname_r. |
| * It is zero if d_getnetbyname_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyname_r |
| * is defined. |
| */ |
| #$d_getnetbyname_r HAS_GETNETBYNAME_R /**/ |
| #define GETNETBYNAME_R_PROTO $getnetbyname_r_proto /**/ |
| |
| /* HAS_GETNETENT_R: |
| * This symbol, if defined, indicates that the getnetent_r routine |
| * is available to getnetent re-entrantly. |
| */ |
| /* GETNETENT_R_PROTO: |
| * This symbol encodes the prototype of getnetent_r. |
| * It is zero if d_getnetent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetent_r |
| * is defined. |
| */ |
| #$d_getnetent_r HAS_GETNETENT_R /**/ |
| #define GETNETENT_R_PROTO $getnetent_r_proto /**/ |
| |
| /* HAS_GETNET_PROTOS: |
| * This symbol, if defined, indicates that <netdb.h> includes |
| * prototypes for getnetent(), getnetbyname(), and |
| * getnetbyaddr(). Otherwise, it is up to the program to guess |
| * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
| */ |
| #$d_getnetprotos HAS_GETNET_PROTOS /**/ |
| |
| /* HAS_GETPAGESIZE: |
| * This symbol, if defined, indicates that the getpagesize system call |
| * is available to get system page size, which is the granularity of |
| * many memory management calls. |
| */ |
| #$d_getpagsz HAS_GETPAGESIZE /**/ |
| |
| /* HAS_GETPROTOENT: |
| * This symbol, if defined, indicates that the getprotoent() routine is |
| * available to look up protocols in some data base or another. |
| */ |
| #$d_getpent HAS_GETPROTOENT /**/ |
| |
| /* HAS_GETPGRP: |
| * This symbol, if defined, indicates that the getpgrp routine is |
| * available to get the current process group. |
| */ |
| /* USE_BSD_GETPGRP: |
| * This symbol, if defined, indicates that getpgrp needs one |
| * arguments whereas USG one needs none. |
| */ |
| #$d_getpgrp HAS_GETPGRP /**/ |
| #$d_bsdgetpgrp USE_BSD_GETPGRP /**/ |
| |
| /* HAS_GETPROTOBYNAME: |
| * This symbol, if defined, indicates that the getprotobyname() |
| * routine is available to look up protocols by their name. |
| */ |
| /* HAS_GETPROTOBYNUMBER: |
| * This symbol, if defined, indicates that the getprotobynumber() |
| * routine is available to look up protocols by their number. |
| */ |
| #$d_getpbyname HAS_GETPROTOBYNAME /**/ |
| #$d_getpbynumber HAS_GETPROTOBYNUMBER /**/ |
| |
| /* HAS_GETPROTOBYNAME_R: |
| * This symbol, if defined, indicates that the getprotobyname_r routine |
| * is available to getprotobyname re-entrantly. |
| */ |
| /* GETPROTOBYNAME_R_PROTO: |
| * This symbol encodes the prototype of getprotobyname_r. |
| * It is zero if d_getprotobyname_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobyname_r |
| * is defined. |
| */ |
| #$d_getprotobyname_r HAS_GETPROTOBYNAME_R /**/ |
| #define GETPROTOBYNAME_R_PROTO $getprotobyname_r_proto /**/ |
| |
| /* HAS_GETPROTOBYNUMBER_R: |
| * This symbol, if defined, indicates that the getprotobynumber_r routine |
| * is available to getprotobynumber re-entrantly. |
| */ |
| /* GETPROTOBYNUMBER_R_PROTO: |
| * This symbol encodes the prototype of getprotobynumber_r. |
| * It is zero if d_getprotobynumber_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobynumber_r |
| * is defined. |
| */ |
| #$d_getprotobynumber_r HAS_GETPROTOBYNUMBER_R /**/ |
| #define GETPROTOBYNUMBER_R_PROTO $getprotobynumber_r_proto /**/ |
| |
| /* HAS_GETPROTOENT_R: |
| * This symbol, if defined, indicates that the getprotoent_r routine |
| * is available to getprotoent re-entrantly. |
| */ |
| /* GETPROTOENT_R_PROTO: |
| * This symbol encodes the prototype of getprotoent_r. |
| * It is zero if d_getprotoent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotoent_r |
| * is defined. |
| */ |
| #$d_getprotoent_r HAS_GETPROTOENT_R /**/ |
| #define GETPROTOENT_R_PROTO $getprotoent_r_proto /**/ |
| |
| /* HAS_GETPROTO_PROTOS: |
| * This symbol, if defined, indicates that <netdb.h> includes |
| * prototypes for getprotoent(), getprotobyname(), and |
| * getprotobyaddr(). Otherwise, it is up to the program to guess |
| * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
| */ |
| #$d_getprotoprotos HAS_GETPROTO_PROTOS /**/ |
| |
| /* HAS_GETPWENT: |
| * This symbol, if defined, indicates that the getpwent routine is |
| * available for sequential access of the passwd database. |
| * If this is not available, the older getpw() function may be available. |
| */ |
| #$d_getpwent HAS_GETPWENT /**/ |
| |
| /* HAS_GETPWENT_R: |
| * This symbol, if defined, indicates that the getpwent_r routine |
| * is available to getpwent re-entrantly. |
| */ |
| /* GETPWENT_R_PROTO: |
| * This symbol encodes the prototype of getpwent_r. |
| * It is zero if d_getpwent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r |
| * is defined. |
| */ |
| #$d_getpwent_r HAS_GETPWENT_R /**/ |
| #define GETPWENT_R_PROTO $getpwent_r_proto /**/ |
| |
| /* HAS_GETPWNAM_R: |
| * This symbol, if defined, indicates that the getpwnam_r routine |
| * is available to getpwnam re-entrantly. |
| */ |
| /* GETPWNAM_R_PROTO: |
| * This symbol encodes the prototype of getpwnam_r. |
| * It is zero if d_getpwnam_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r |
| * is defined. |
| */ |
| #$d_getpwnam_r HAS_GETPWNAM_R /**/ |
| #define GETPWNAM_R_PROTO $getpwnam_r_proto /**/ |
| |
| /* HAS_GETPWUID_R: |
| * This symbol, if defined, indicates that the getpwuid_r routine |
| * is available to getpwuid re-entrantly. |
| */ |
| /* GETPWUID_R_PROTO: |
| * This symbol encodes the prototype of getpwuid_r. |
| * It is zero if d_getpwuid_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r |
| * is defined. |
| */ |
| #$d_getpwuid_r HAS_GETPWUID_R /**/ |
| #define GETPWUID_R_PROTO $getpwuid_r_proto /**/ |
| |
| /* HAS_GETSERVENT: |
| * This symbol, if defined, indicates that the getservent() routine is |
| * available to look up network services in some data base or another. |
| */ |
| #$d_getsent HAS_GETSERVENT /**/ |
| |
| /* HAS_GETSERVBYNAME_R: |
| * This symbol, if defined, indicates that the getservbyname_r routine |
| * is available to getservbyname re-entrantly. |
| */ |
| /* GETSERVBYNAME_R_PROTO: |
| * This symbol encodes the prototype of getservbyname_r. |
| * It is zero if d_getservbyname_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyname_r |
| * is defined. |
| */ |
| #$d_getservbyname_r HAS_GETSERVBYNAME_R /**/ |
| #define GETSERVBYNAME_R_PROTO $getservbyname_r_proto /**/ |
| |
| /* HAS_GETSERVBYPORT_R: |
| * This symbol, if defined, indicates that the getservbyport_r routine |
| * is available to getservbyport re-entrantly. |
| */ |
| /* GETSERVBYPORT_R_PROTO: |
| * This symbol encodes the prototype of getservbyport_r. |
| * It is zero if d_getservbyport_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyport_r |
| * is defined. |
| */ |
| #$d_getservbyport_r HAS_GETSERVBYPORT_R /**/ |
| #define GETSERVBYPORT_R_PROTO $getservbyport_r_proto /**/ |
| |
| /* HAS_GETSERVENT_R: |
| * This symbol, if defined, indicates that the getservent_r routine |
| * is available to getservent re-entrantly. |
| */ |
| /* GETSERVENT_R_PROTO: |
| * This symbol encodes the prototype of getservent_r. |
| * It is zero if d_getservent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r |
| * is defined. |
| */ |
| #$d_getservent_r HAS_GETSERVENT_R /**/ |
| #define GETSERVENT_R_PROTO $getservent_r_proto /**/ |
| |
| /* HAS_GETSERV_PROTOS: |
| * This symbol, if defined, indicates that <netdb.h> includes |
| * prototypes for getservent(), getservbyname(), and |
| * getservbyaddr(). Otherwise, it is up to the program to guess |
| * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
| */ |
| #$d_getservprotos HAS_GETSERV_PROTOS /**/ |
| |
| /* HAS_GETSPNAM_R: |
| * This symbol, if defined, indicates that the getspnam_r routine |
| * is available to getspnam re-entrantly. |
| */ |
| /* GETSPNAM_R_PROTO: |
| * This symbol encodes the prototype of getspnam_r. |
| * It is zero if d_getspnam_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r |
| * is defined. |
| */ |
| #$d_getspnam_r HAS_GETSPNAM_R /**/ |
| #define GETSPNAM_R_PROTO $getspnam_r_proto /**/ |
| |
| /* HAS_GETSERVBYNAME: |
| * This symbol, if defined, indicates that the getservbyname() |
| * routine is available to look up services by their name. |
| */ |
| /* HAS_GETSERVBYPORT: |
| * This symbol, if defined, indicates that the getservbyport() |
| * routine is available to look up services by their port. |
| */ |
| #$d_getsbyname HAS_GETSERVBYNAME /**/ |
| #$d_getsbyport HAS_GETSERVBYPORT /**/ |
| |
| /* HAS_GMTIME_R: |
| * This symbol, if defined, indicates that the gmtime_r routine |
| * is available to gmtime re-entrantly. |
| */ |
| /* GMTIME_R_PROTO: |
| * This symbol encodes the prototype of gmtime_r. |
| * It is zero if d_gmtime_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r |
| * is defined. |
| */ |
| #$d_gmtime_r HAS_GMTIME_R /**/ |
| #define GMTIME_R_PROTO $gmtime_r_proto /**/ |
| |
| /* HAS_GNULIBC: |
| * This symbol, if defined, indicates to the C program that |
| * the GNU C library is being used. A better check is to use |
| * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc. |
| */ |
| #$d_gnulibc HAS_GNULIBC /**/ |
| #if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE) |
| # define _GNU_SOURCE |
| #endif |
| |
| /* HAS_HTONL: |
| * This symbol, if defined, indicates that the htonl() routine (and |
| * friends htons() ntohl() ntohs()) are available to do network |
| * order byte swapping. |
| */ |
| /* HAS_HTONS: |
| * This symbol, if defined, indicates that the htons() routine (and |
| * friends htonl() ntohl() ntohs()) are available to do network |
| * order byte swapping. |
| */ |
| /* HAS_NTOHL: |
| * This symbol, if defined, indicates that the ntohl() routine (and |
| * friends htonl() htons() ntohs()) are available to do network |
| * order byte swapping. |
| */ |
| /* HAS_NTOHS: |
| * This symbol, if defined, indicates that the ntohs() routine (and |
| * friends htonl() htons() ntohl()) are available to do network |
| * order byte swapping. |
| */ |
| #$d_htonl HAS_HTONL /**/ |
| #$d_htonl HAS_HTONS /**/ |
| #$d_htonl HAS_NTOHL /**/ |
| #$d_htonl HAS_NTOHS /**/ |
| |
| /* HAS_ISASCII: |
| * This manifest constant lets the C program know that isascii |
| * is available. |
| */ |
| #$d_isascii HAS_ISASCII /**/ |
| |
| /* HAS_LCHOWN: |
| * This symbol, if defined, indicates that the lchown routine is |
| * available to operate on a symbolic link (instead of following the |
| * link). |
| */ |
| #$d_lchown HAS_LCHOWN /**/ |
| |
| /* HAS_LOCALTIME_R: |
| * This symbol, if defined, indicates that the localtime_r routine |
| * is available to localtime re-entrantly. |
| */ |
| /* LOCALTIME_R_NEEDS_TZSET: |
| * Many libc's localtime_r implementations do not call tzset, |
| * making them differ from localtime(), and making timezone |
| * changes using \$ENV{TZ} without explicitly calling tzset |
| * impossible. This symbol makes us call tzset before localtime_r |
| */ |
| #$d_localtime_r_needs_tzset LOCALTIME_R_NEEDS_TZSET /**/ |
| #ifdef LOCALTIME_R_NEEDS_TZSET |
| #define L_R_TZSET tzset(), |
| #else |
| #define L_R_TZSET |
| #endif |
| |
| /* LOCALTIME_R_PROTO: |
| * This symbol encodes the prototype of localtime_r. |
| * It is zero if d_localtime_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r |
| * is defined. |
| */ |
| #$d_localtime_r HAS_LOCALTIME_R /**/ |
| #define LOCALTIME_R_PROTO $localtime_r_proto /**/ |
| |
| /* HAS_LONG_DOUBLE: |
| * This symbol will be defined if the C compiler supports long |
| * doubles. |
| */ |
| /* LONG_DOUBLESIZE: |
| * This symbol contains the size of a long double, so that the |
| * C preprocessor can make decisions based on it. It is only |
| * defined if the system supports long doubles. |
| */ |
| #$d_longdbl HAS_LONG_DOUBLE /**/ |
| #ifdef HAS_LONG_DOUBLE |
| #define LONG_DOUBLESIZE $longdblsize /**/ |
| #endif |
| |
| /* HAS_LONG_LONG: |
| * This symbol will be defined if the C compiler supports long long. |
| */ |
| /* LONGLONGSIZE: |
| * This symbol contains the size of a long long, so that the |
| * C preprocessor can make decisions based on it. It is only |
| * defined if the system supports long long. |
| */ |
| #$d_longlong HAS_LONG_LONG /**/ |
| #ifdef HAS_LONG_LONG |
| #define LONGLONGSIZE $longlongsize /**/ |
| #endif |
| |
| /* HAS_LSEEK_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the lseek() function. Otherwise, it is up |
| * to the program to supply one. A good guess is |
| * extern off_t lseek(int, off_t, int); |
| */ |
| #$d_lseekproto HAS_LSEEK_PROTO /**/ |
| |
| /* HAS_MEMCHR: |
| * This symbol, if defined, indicates that the memchr routine is available |
| * to locate characters within a C string. |
| */ |
| #$d_memchr HAS_MEMCHR /**/ |
| |
| /* HAS_MKSTEMP: |
| * This symbol, if defined, indicates that the mkstemp routine is |
| * available to exclusively create and open a uniquely named |
| * temporary file. |
| */ |
| #$d_mkstemp HAS_MKSTEMP /**/ |
| |
| /* HAS_MMAP: |
| * This symbol, if defined, indicates that the mmap system call is |
| * available to map a file into memory. |
| */ |
| /* Mmap_t: |
| * This symbol holds the return type of the mmap() system call |
| * (and simultaneously the type of the first argument). |
| * Usually set to 'void *' or 'caddr_t'. |
| */ |
| #$d_mmap HAS_MMAP /**/ |
| #define Mmap_t $mmaptype /**/ |
| |
| /* HAS_MSG: |
| * This symbol, if defined, indicates that the entire msg*(2) library is |
| * supported (IPC mechanism based on message queues). |
| */ |
| #$d_msg HAS_MSG /**/ |
| |
| /* HAS_OPEN3: |
| * This manifest constant lets the C program know that the three |
| * argument form of open(2) is available. |
| */ |
| #$d_open3 HAS_OPEN3 /**/ |
| |
| /* OLD_PTHREAD_CREATE_JOINABLE: |
| * This symbol, if defined, indicates how to create pthread |
| * in joinable (aka undetached) state. NOTE: not defined |
| * if pthread.h already has defined PTHREAD_CREATE_JOINABLE |
| * (the new version of the constant). |
| * If defined, known values are PTHREAD_CREATE_UNDETACHED |
| * and __UNDETACHED. |
| */ |
| #$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/ |
| |
| /* HAS_PTHREAD_ATFORK: |
| * This symbol, if defined, indicates that the pthread_atfork routine |
| * is available to setup fork handlers. |
| */ |
| #$d_pthread_atfork HAS_PTHREAD_ATFORK /**/ |
| |
| /* HAS_PTHREAD_YIELD: |
| * This symbol, if defined, indicates that the pthread_yield |
| * routine is available to yield the execution of the current |
| * thread. sched_yield is preferable to pthread_yield. |
| */ |
| /* SCHED_YIELD: |
| * This symbol defines the way to yield the execution of |
| * the current thread. Known ways are sched_yield, |
| * pthread_yield, and pthread_yield with NULL. |
| */ |
| /* HAS_SCHED_YIELD: |
| * This symbol, if defined, indicates that the sched_yield |
| * routine is available to yield the execution of the current |
| * thread. sched_yield is preferable to pthread_yield. |
| */ |
| #$d_pthread_yield HAS_PTHREAD_YIELD /**/ |
| #define SCHED_YIELD $sched_yield /**/ |
| #$d_sched_yield HAS_SCHED_YIELD /**/ |
| |
| /* HAS_RANDOM_R: |
| * This symbol, if defined, indicates that the random_r routine |
| * is available to random re-entrantly. |
| */ |
| /* RANDOM_R_PROTO: |
| * This symbol encodes the prototype of random_r. |
| * It is zero if d_random_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_random_r |
| * is defined. |
| */ |
| #$d_random_r HAS_RANDOM_R /**/ |
| #define RANDOM_R_PROTO $random_r_proto /**/ |
| |
| /* HAS_READDIR64_R: |
| * This symbol, if defined, indicates that the readdir64_r routine |
| * is available to readdir64 re-entrantly. |
| */ |
| /* READDIR64_R_PROTO: |
| * This symbol encodes the prototype of readdir64_r. |
| * It is zero if d_readdir64_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir64_r |
| * is defined. |
| */ |
| #$d_readdir64_r HAS_READDIR64_R /**/ |
| #define READDIR64_R_PROTO $readdir64_r_proto /**/ |
| |
| /* HAS_READDIR_R: |
| * This symbol, if defined, indicates that the readdir_r routine |
| * is available to readdir re-entrantly. |
| */ |
| /* READDIR_R_PROTO: |
| * This symbol encodes the prototype of readdir_r. |
| * It is zero if d_readdir_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir_r |
| * is defined. |
| */ |
| #$d_readdir_r HAS_READDIR_R /**/ |
| #define READDIR_R_PROTO $readdir_r_proto /**/ |
| |
| /* HAS_SAFE_BCOPY: |
| * This symbol, if defined, indicates that the bcopy routine is available |
| * to copy potentially overlapping memory blocks. Normally, you should |
| * probably use memmove() or memcpy(). If neither is defined, roll your |
| * own version. |
| */ |
| #$d_safebcpy HAS_SAFE_BCOPY /**/ |
| |
| /* HAS_SAFE_MEMCPY: |
| * This symbol, if defined, indicates that the memcpy routine is available |
| * to copy potentially overlapping memory blocks. If you need to |
| * copy overlapping memory blocks, you should check HAS_MEMMOVE and |
| * use memmove() instead, if available. |
| */ |
| #$d_safemcpy HAS_SAFE_MEMCPY /**/ |
| |
| /* HAS_SANE_MEMCMP: |
| * This symbol, if defined, indicates that the memcmp routine is available |
| * and can be used to compare relative magnitudes of chars with their high |
| * bits set. If it is not defined, roll your own version. |
| */ |
| #$d_sanemcmp HAS_SANE_MEMCMP /**/ |
| |
| /* HAS_SEM: |
| * This symbol, if defined, indicates that the entire sem*(2) library is |
| * supported. |
| */ |
| #$d_sem HAS_SEM /**/ |
| |
| /* HAS_SETGRENT: |
| * This symbol, if defined, indicates that the setgrent routine is |
| * available for initializing sequential access of the group database. |
| */ |
| #$d_setgrent HAS_SETGRENT /**/ |
| |
| /* HAS_SETGRENT_R: |
| * This symbol, if defined, indicates that the setgrent_r routine |
| * is available to setgrent re-entrantly. |
| */ |
| /* SETGRENT_R_PROTO: |
| * This symbol encodes the prototype of setgrent_r. |
| * It is zero if d_setgrent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setgrent_r |
| * is defined. |
| */ |
| #$d_setgrent_r HAS_SETGRENT_R /**/ |
| #define SETGRENT_R_PROTO $setgrent_r_proto /**/ |
| |
| /* HAS_SETHOSTENT: |
| * This symbol, if defined, indicates that the sethostent() routine is |
| * available. |
| */ |
| #$d_sethent HAS_SETHOSTENT /**/ |
| |
| /* HAS_SETHOSTENT_R: |
| * This symbol, if defined, indicates that the sethostent_r routine |
| * is available to sethostent re-entrantly. |
| */ |
| /* SETHOSTENT_R_PROTO: |
| * This symbol encodes the prototype of sethostent_r. |
| * It is zero if d_sethostent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_sethostent_r |
| * is defined. |
| */ |
| #$d_sethostent_r HAS_SETHOSTENT_R /**/ |
| #define SETHOSTENT_R_PROTO $sethostent_r_proto /**/ |
| |
| /* HAS_SETLOCALE_R: |
| * This symbol, if defined, indicates that the setlocale_r routine |
| * is available to setlocale re-entrantly. |
| */ |
| /* SETLOCALE_R_PROTO: |
| * This symbol encodes the prototype of setlocale_r. |
| * It is zero if d_setlocale_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setlocale_r |
| * is defined. |
| */ |
| #$d_setlocale_r HAS_SETLOCALE_R /**/ |
| #define SETLOCALE_R_PROTO $setlocale_r_proto /**/ |
| |
| /* HAS_SETNETENT: |
| * This symbol, if defined, indicates that the setnetent() routine is |
| * available. |
| */ |
| #$d_setnent HAS_SETNETENT /**/ |
| |
| /* HAS_SETNETENT_R: |
| * This symbol, if defined, indicates that the setnetent_r routine |
| * is available to setnetent re-entrantly. |
| */ |
| /* SETNETENT_R_PROTO: |
| * This symbol encodes the prototype of setnetent_r. |
| * It is zero if d_setnetent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setnetent_r |
| * is defined. |
| */ |
| #$d_setnetent_r HAS_SETNETENT_R /**/ |
| #define SETNETENT_R_PROTO $setnetent_r_proto /**/ |
| |
| /* HAS_SETPROTOENT: |
| * This symbol, if defined, indicates that the setprotoent() routine is |
| * available. |
| */ |
| #$d_setpent HAS_SETPROTOENT /**/ |
| |
| /* HAS_SETPGRP: |
| * This symbol, if defined, indicates that the setpgrp routine is |
| * available to set the current process group. |
| */ |
| /* USE_BSD_SETPGRP: |
| * This symbol, if defined, indicates that setpgrp needs two |
| * arguments whereas USG one needs none. See also HAS_SETPGID |
| * for a POSIX interface. |
| */ |
| #$d_setpgrp HAS_SETPGRP /**/ |
| #$d_bsdsetpgrp USE_BSD_SETPGRP /**/ |
| |
| /* HAS_SETPROTOENT_R: |
| * This symbol, if defined, indicates that the setprotoent_r routine |
| * is available to setprotoent re-entrantly. |
| */ |
| /* SETPROTOENT_R_PROTO: |
| * This symbol encodes the prototype of setprotoent_r. |
| * It is zero if d_setprotoent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setprotoent_r |
| * is defined. |
| */ |
| #$d_setprotoent_r HAS_SETPROTOENT_R /**/ |
| #define SETPROTOENT_R_PROTO $setprotoent_r_proto /**/ |
| |
| /* HAS_SETPWENT: |
| * This symbol, if defined, indicates that the setpwent routine is |
| * available for initializing sequential access of the passwd database. |
| */ |
| #$d_setpwent HAS_SETPWENT /**/ |
| |
| /* HAS_SETPWENT_R: |
| * This symbol, if defined, indicates that the setpwent_r routine |
| * is available to setpwent re-entrantly. |
| */ |
| /* SETPWENT_R_PROTO: |
| * This symbol encodes the prototype of setpwent_r. |
| * It is zero if d_setpwent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setpwent_r |
| * is defined. |
| */ |
| #$d_setpwent_r HAS_SETPWENT_R /**/ |
| #define SETPWENT_R_PROTO $setpwent_r_proto /**/ |
| |
| /* HAS_SETSERVENT: |
| * This symbol, if defined, indicates that the setservent() routine is |
| * available. |
| */ |
| #$d_setsent HAS_SETSERVENT /**/ |
| |
| /* HAS_SETSERVENT_R: |
| * This symbol, if defined, indicates that the setservent_r routine |
| * is available to setservent re-entrantly. |
| */ |
| /* SETSERVENT_R_PROTO: |
| * This symbol encodes the prototype of setservent_r. |
| * It is zero if d_setservent_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setservent_r |
| * is defined. |
| */ |
| #$d_setservent_r HAS_SETSERVENT_R /**/ |
| #define SETSERVENT_R_PROTO $setservent_r_proto /**/ |
| |
| /* HAS_SETVBUF: |
| * This symbol, if defined, indicates that the setvbuf routine is |
| * available to change buffering on an open stdio stream. |
| * to a line-buffered mode. |
| */ |
| #$d_setvbuf HAS_SETVBUF /**/ |
| |
| /* HAS_SHM: |
| * This symbol, if defined, indicates that the entire shm*(2) library is |
| * supported. |
| */ |
| #$d_shm HAS_SHM /**/ |
| |
| /* Shmat_t: |
| * This symbol holds the return type of the shmat() system call. |
| * Usually set to 'void *' or 'char *'. |
| */ |
| /* HAS_SHMAT_PROTOTYPE: |
| * This symbol, if defined, indicates that the sys/shm.h includes |
| * a prototype for shmat(). Otherwise, it is up to the program to |
| * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess, |
| * but not always right so it should be emitted by the program only |
| * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. |
| */ |
| #define Shmat_t $shmattype /**/ |
| #$d_shmatprototype HAS_SHMAT_PROTOTYPE /**/ |
| |
| /* HAS_SIGACTION: |
| * This symbol, if defined, indicates that Vr4's sigaction() routine |
| * is available. |
| */ |
| #$d_sigaction HAS_SIGACTION /**/ |
| |
| /* HAS_SIGSETJMP: |
| * This variable indicates to the C program that the sigsetjmp() |
| * routine is available to save the calling process's registers |
| * and stack environment for later use by siglongjmp(), and |
| * to optionally save the process's signal mask. See |
| * Sigjmp_buf, Sigsetjmp, and Siglongjmp. |
| */ |
| /* Sigjmp_buf: |
| * This is the buffer type to be used with Sigsetjmp and Siglongjmp. |
| */ |
| /* Sigsetjmp: |
| * This macro is used in the same way as sigsetjmp(), but will invoke |
| * traditional setjmp() if sigsetjmp isn't available. |
| * See HAS_SIGSETJMP. |
| */ |
| /* Siglongjmp: |
| * This macro is used in the same way as siglongjmp(), but will invoke |
| * traditional longjmp() if siglongjmp isn't available. |
| * See HAS_SIGSETJMP. |
| */ |
| #$d_sigsetjmp HAS_SIGSETJMP /**/ |
| #ifdef HAS_SIGSETJMP |
| #define Sigjmp_buf sigjmp_buf |
| #define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) |
| #define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) |
| #else |
| #define Sigjmp_buf jmp_buf |
| #define Sigsetjmp(buf,save_mask) setjmp((buf)) |
| #define Siglongjmp(buf,retval) longjmp((buf),(retval)) |
| #endif |
| |
| /* HAS_SOCKET: |
| * This symbol, if defined, indicates that the BSD socket interface is |
| * supported. |
| */ |
| /* HAS_SOCKETPAIR: |
| * This symbol, if defined, indicates that the BSD socketpair() call is |
| * supported. |
| */ |
| /* HAS_MSG_CTRUNC: |
| * This symbol, if defined, indicates that the MSG_CTRUNC is supported. |
| * Checking just with #ifdef might not be enough because this symbol |
| * has been known to be an enum. |
| */ |
| /* HAS_MSG_DONTROUTE: |
| * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. |
| * Checking just with #ifdef might not be enough because this symbol |
| * has been known to be an enum. |
| */ |
| /* HAS_MSG_OOB: |
| * This symbol, if defined, indicates that the MSG_OOB is supported. |
| * Checking just with #ifdef might not be enough because this symbol |
| * has been known to be an enum. |
| */ |
| /* HAS_MSG_PEEK: |
| * This symbol, if defined, indicates that the MSG_PEEK is supported. |
| * Checking just with #ifdef might not be enough because this symbol |
| * has been known to be an enum. |
| */ |
| /* HAS_MSG_PROXY: |
| * This symbol, if defined, indicates that the MSG_PROXY is supported. |
| * Checking just with #ifdef might not be enough because this symbol |
| * has been known to be an enum. |
| */ |
| /* HAS_SCM_RIGHTS: |
| * This symbol, if defined, indicates that the SCM_RIGHTS is supported. |
| * Checking just with #ifdef might not be enough because this symbol |
| * has been known to be an enum. |
| */ |
| /* HAS_SOCKADDR_SA_LEN: |
| * This symbol, if defined, indicates that the struct sockaddr |
| * structure has a member called sa_len, indicating the length of |
| * the structure. |
| */ |
| /* HAS_SOCKADDR_IN6: |
| * This symbol, if defined, indicates the availability of |
| * struct sockaddr_in6; |
| */ |
| /* HAS_SIN6_SCOPE_ID: |
| * This symbol, if defined, indicates that the struct sockaddr_in6 |
| * structure has a member called sin6_scope_id. |
| */ |
| /* HAS_IPV6_MREQ: |
| * This symbol, if defined, indicates the availability of |
| * struct ipv6_mreq; |
| */ |
| #$d_socket HAS_SOCKET /**/ |
| #$d_sockpair HAS_SOCKETPAIR /**/ |
| #$d_sockaddr_sa_len HAS_SOCKADDR_SA_LEN /**/ |
| #$d_msg_ctrunc HAS_MSG_CTRUNC /**/ |
| #$d_msg_dontroute HAS_MSG_DONTROUTE /**/ |
| #$d_msg_oob HAS_MSG_OOB /**/ |
| #$d_msg_peek HAS_MSG_PEEK /**/ |
| #$d_msg_proxy HAS_MSG_PROXY /**/ |
| #$d_scm_rights HAS_SCM_RIGHTS /**/ |
| #$d_sockaddr_in6 HAS_SOCKADDR_IN6 /**/ |
| #$d_sin6_scope_id HAS_SIN6_SCOPE_ID /**/ |
| #$d_ipv6_mreq HAS_IPV6_MREQ /**/ |
| |
| /* HAS_SRAND48_R: |
| * This symbol, if defined, indicates that the srand48_r routine |
| * is available to srand48 re-entrantly. |
| */ |
| /* SRAND48_R_PROTO: |
| * This symbol encodes the prototype of srand48_r. |
| * It is zero if d_srand48_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srand48_r |
| * is defined. |
| */ |
| #$d_srand48_r HAS_SRAND48_R /**/ |
| #define SRAND48_R_PROTO $srand48_r_proto /**/ |
| |
| /* HAS_SRANDOM_R: |
| * This symbol, if defined, indicates that the srandom_r routine |
| * is available to srandom re-entrantly. |
| */ |
| /* SRANDOM_R_PROTO: |
| * This symbol encodes the prototype of srandom_r. |
| * It is zero if d_srandom_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srandom_r |
| * is defined. |
| */ |
| #$d_srandom_r HAS_SRANDOM_R /**/ |
| #define SRANDOM_R_PROTO $srandom_r_proto /**/ |
| |
| /* USE_STAT_BLOCKS: |
| * This symbol is defined if this system has a stat structure declaring |
| * st_blksize and st_blocks. |
| */ |
| #ifndef USE_STAT_BLOCKS |
| #$d_statblks USE_STAT_BLOCKS /**/ |
| #endif |
| |
| /* HAS_STATIC_INLINE: |
| * This symbol, if defined, indicates that the C compiler supports |
| * C99-style static inline. That is, the function can't be called |
| * from another translation unit. |
| */ |
| /* PERL_STATIC_INLINE: |
| * This symbol gives the best-guess incantation to use for static |
| * inline functions. If HAS_STATIC_INLINE is defined, this will |
| * give C99-style inline. If HAS_STATIC_INLINE is not defined, |
| * this will give a plain 'static'. It will always be defined |
| * to something that gives static linkage. |
| * Possibilities include |
| * static inline (c99) |
| * static __inline__ (gcc -ansi) |
| * static __inline (MSVC) |
| * static _inline (older MSVC) |
| * static (c89 compilers) |
| */ |
| #$d_static_inline HAS_STATIC_INLINE /**/ |
| #define PERL_STATIC_INLINE $perl_static_inline /**/ |
| |
| /* USE_STDIO_PTR: |
| * This symbol is defined if the _ptr and _cnt fields (or similar) |
| * of the stdio FILE structure can be used to access the stdio buffer |
| * for a file handle. If this is defined, then the FILE_ptr(fp) |
| * and FILE_cnt(fp) macros will also be defined and should be used |
| * to access these fields. |
| */ |
| /* FILE_ptr: |
| * This macro is used to access the _ptr field (or equivalent) of the |
| * FILE structure pointed to by its argument. This macro will always be |
| * defined if USE_STDIO_PTR is defined. |
| */ |
| /* STDIO_PTR_LVALUE: |
| * This symbol is defined if the FILE_ptr macro can be used as an |
| * lvalue. |
| */ |
| /* FILE_cnt: |
| * This macro is used to access the _cnt field (or equivalent) of the |
| * FILE structure pointed to by its argument. This macro will always be |
| * defined if USE_STDIO_PTR is defined. |
| */ |
| /* STDIO_CNT_LVALUE: |
| * This symbol is defined if the FILE_cnt macro can be used as an |
| * lvalue. |
| */ |
| /* STDIO_PTR_LVAL_SETS_CNT: |
| * This symbol is defined if using the FILE_ptr macro as an lvalue |
| * to increase the pointer by n has the side effect of decreasing the |
| * value of File_cnt(fp) by n. |
| */ |
| /* STDIO_PTR_LVAL_NOCHANGE_CNT: |
| * This symbol is defined if using the FILE_ptr macro as an lvalue |
| * to increase the pointer by n leaves File_cnt(fp) unchanged. |
| */ |
| #$d_stdstdio USE_STDIO_PTR /**/ |
| #ifdef USE_STDIO_PTR |
| #define FILE_ptr(fp) $stdio_ptr |
| #$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/ |
| #define FILE_cnt(fp) $stdio_cnt |
| #$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/ |
| #$d_stdio_ptr_lval_sets_cnt STDIO_PTR_LVAL_SETS_CNT /**/ |
| #$d_stdio_ptr_lval_nochange_cnt STDIO_PTR_LVAL_NOCHANGE_CNT /**/ |
| #endif |
| |
| /* USE_STDIO_BASE: |
| * This symbol is defined if the _base field (or similar) of the |
| * stdio FILE structure can be used to access the stdio buffer for |
| * a file handle. If this is defined, then the FILE_base(fp) macro |
| * will also be defined and should be used to access this field. |
| * Also, the FILE_bufsiz(fp) macro will be defined and should be used |
| * to determine the number of bytes in the buffer. USE_STDIO_BASE |
| * will never be defined unless USE_STDIO_PTR is. |
| */ |
| /* FILE_base: |
| * This macro is used to access the _base field (or equivalent) of the |
| * FILE structure pointed to by its argument. This macro will always be |
| * defined if USE_STDIO_BASE is defined. |
| */ |
| /* FILE_bufsiz: |
| * This macro is used to determine the number of bytes in the I/O |
| * buffer pointed to by _base field (or equivalent) of the FILE |
| * structure pointed to its argument. This macro will always be defined |
| * if USE_STDIO_BASE is defined. |
| */ |
| #$d_stdiobase USE_STDIO_BASE /**/ |
| #ifdef USE_STDIO_BASE |
| #define FILE_base(fp) $stdio_base |
| #define FILE_bufsiz(fp) $stdio_bufsiz |
| #endif |
| |
| /* USE_STRUCT_COPY: |
| * This symbol, if defined, indicates that this C compiler knows how |
| * to copy structures. If undefined, you'll need to use a block copy |
| * routine of some sort instead. |
| */ |
| #$d_strctcpy USE_STRUCT_COPY /**/ |
| |
| /* HAS_STRERROR: |
| * This symbol, if defined, indicates that the strerror routine is |
| * available to translate error numbers to strings. See the writeup |
| * of Strerror() in this file before you try to define your own. |
| */ |
| /* HAS_SYS_ERRLIST: |
| * This symbol, if defined, indicates that the sys_errlist array is |
| * available to translate error numbers to strings. The extern int |
| * sys_nerr gives the size of that table. |
| */ |
| /* Strerror: |
| * This preprocessor symbol is defined as a macro if strerror() is |
| * not available to translate error numbers to strings but sys_errlist[] |
| * array is there. |
| */ |
| #$d_strerror HAS_STRERROR /**/ |
| #$d_syserrlst HAS_SYS_ERRLIST /**/ |
| #define Strerror(e) $d_strerrm |
| |
| /* HAS_STRERROR_R: |
| * This symbol, if defined, indicates that the strerror_r routine |
| * is available to strerror re-entrantly. |
| */ |
| /* STRERROR_R_PROTO: |
| * This symbol encodes the prototype of strerror_r. |
| * It is zero if d_strerror_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r |
| * is defined. |
| */ |
| #$d_strerror_r HAS_STRERROR_R /**/ |
| #define STRERROR_R_PROTO $strerror_r_proto /**/ |
| |
| /* HAS_STRTOUL: |
| * This symbol, if defined, indicates that the strtoul routine is |
| * available to provide conversion of strings to unsigned long. |
| */ |
| #$d_strtoul HAS_STRTOUL /**/ |
| |
| /* HAS_TIME: |
| * This symbol, if defined, indicates that the time() routine exists. |
| */ |
| /* Time_t: |
| * This symbol holds the type returned by time(). It can be long, |
| * or time_t on BSD sites (in which case <sys/types.h> should be |
| * included). |
| */ |
| #$d_time HAS_TIME /**/ |
| #define Time_t $timetype /* Time type */ |
| |
| /* HAS_TIMES: |
| * This symbol, if defined, indicates that the times() routine exists. |
| * Note that this became obsolete on some systems (SUNOS), which now |
| * use getrusage(). It may be necessary to include <sys/times.h>. |
| */ |
| #$d_times HAS_TIMES /**/ |
| |
| /* HAS_TMPNAM_R: |
| * This symbol, if defined, indicates that the tmpnam_r routine |
| * is available to tmpnam re-entrantly. |
| */ |
| /* TMPNAM_R_PROTO: |
| * This symbol encodes the prototype of tmpnam_r. |
| * It is zero if d_tmpnam_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r |
| * is defined. |
| */ |
| #$d_tmpnam_r HAS_TMPNAM_R /**/ |
| #define TMPNAM_R_PROTO $tmpnam_r_proto /**/ |
| |
| /* HAS_TTYNAME_R: |
| * This symbol, if defined, indicates that the ttyname_r routine |
| * is available to ttyname re-entrantly. |
| */ |
| /* TTYNAME_R_PROTO: |
| * This symbol encodes the prototype of ttyname_r. |
| * It is zero if d_ttyname_r is undef, and one of the |
| * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ttyname_r |
| * is defined. |
| */ |
| #$d_ttyname_r HAS_TTYNAME_R /**/ |
| #define TTYNAME_R_PROTO $ttyname_r_proto /**/ |
| |
| /* HAS_UNION_SEMUN: |
| * This symbol, if defined, indicates that the union semun is |
| * defined by including <sys/sem.h>. If not, the user code |
| * probably needs to define it as: |
| * union semun { |
| * int val; |
| * struct semid_ds *buf; |
| * unsigned short *array; |
| * } |
| */ |
| /* USE_SEMCTL_SEMUN: |
| * This symbol, if defined, indicates that union semun is |
| * used for semctl IPC_STAT. |
| */ |
| /* USE_SEMCTL_SEMID_DS: |
| * This symbol, if defined, indicates that struct semid_ds * is |
| * used for semctl IPC_STAT. |
| */ |
| #$d_union_semun HAS_UNION_SEMUN /**/ |
| #$d_semctl_semun USE_SEMCTL_SEMUN /**/ |
| #$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/ |
| |
| /* HAS_VFORK: |
| * This symbol, if defined, indicates that vfork() exists. |
| */ |
| #$d_vfork HAS_VFORK /**/ |
| |
| /* HAS_PSEUDOFORK: |
| * This symbol, if defined, indicates that an emulation of the |
| * fork routine is available. |
| */ |
| #$d_pseudofork HAS_PSEUDOFORK /**/ |
| |
| /* Signal_t: |
| * This symbol's value is either "void" or "int", corresponding to the |
| * appropriate return type of a signal handler. Thus, you can declare |
| * a signal handler using "Signal_t (*handler)()", and define the |
| * handler using "Signal_t handler(sig)". |
| */ |
| #define Signal_t $signal_t /* Signal handler's return type */ |
| |
| /* HASVOLATILE: |
| * This symbol, if defined, indicates that this C compiler knows about |
| * the volatile declaration. |
| */ |
| #$d_volatile HASVOLATILE /**/ |
| #ifndef HASVOLATILE |
| #define volatile |
| #endif |
| |
| /* HAS_VPRINTF: |
| * This symbol, if defined, indicates that the vprintf routine is available |
| * to printf with a pointer to an argument list. If unavailable, you |
| * may need to write your own, probably in terms of _doprnt(). |
| */ |
| /* USE_CHAR_VSPRINTF: |
| * This symbol is defined if this system has vsprintf() returning type |
| * (char*). The trend seems to be to declare it as "int vsprintf()". It |
| * is up to the package author to declare vsprintf correctly based on the |
| * symbol. |
| */ |
| #$d_vprintf HAS_VPRINTF /**/ |
| #$d_charvspr USE_CHAR_VSPRINTF /**/ |
| |
| /* DOUBLESIZE: |
| * This symbol contains the size of a double, so that the C preprocessor |
| * can make decisions based on it. |
| */ |
| #define DOUBLESIZE $doublesize /**/ |
| |
| /* EBCDIC: |
| * This symbol, if defined, indicates that this system uses |
| * EBCDIC encoding. |
| */ |
| #$ebcdic EBCDIC /**/ |
| |
| /* Fpos_t: |
| * This symbol holds the type used to declare file positions in libc. |
| * It can be fpos_t, long, uint, etc... It may be necessary to include |
| * <sys/types.h> to get any typedef'ed information. |
| */ |
| #define Fpos_t $fpostype /* File position type */ |
| |
| /* Gid_t_f: |
| * This symbol defines the format string used for printing a Gid_t. |
| */ |
| #define Gid_t_f $gidformat /**/ |
| |
| /* Gid_t_sign: |
| * This symbol holds the signedess of a Gid_t. |
| * 1 for unsigned, -1 for signed. |
| */ |
| #define Gid_t_sign $gidsign /* GID sign */ |
| |
| /* Gid_t_size: |
| * This symbol holds the size of a Gid_t in bytes. |
| */ |
| #define Gid_t_size $gidsize /* GID size */ |
| |
| /* Gid_t: |
| * This symbol holds the return type of getgid() and the type of |
| * argument to setrgid() and related functions. Typically, |
| * it is the type of group ids in the kernel. It can be int, ushort, |
| * gid_t, etc... It may be necessary to include <sys/types.h> to get |
| * any typedef'ed information. |
| */ |
| #define Gid_t $gidtype /* Type for getgid(), etc... */ |
| |
| /* I_DIRENT: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <dirent.h>. Using this symbol also triggers the definition |
| * of the Direntry_t define which ends up being 'struct dirent' or |
| * 'struct direct' depending on the availability of <dirent.h>. |
| */ |
| /* DIRNAMLEN: |
| * This symbol, if defined, indicates to the C program that the length |
| * of directory entry names is provided by a d_namlen field. Otherwise |
| * you need to do strlen() on the d_name field. |
| */ |
| /* Direntry_t: |
| * This symbol is set to 'struct direct' or 'struct dirent' depending on |
| * whether dirent is available or not. You should use this pseudo type to |
| * portably declare your directory entries. |
| */ |
| #$i_dirent I_DIRENT /**/ |
| #$d_dirnamlen DIRNAMLEN /**/ |
| #define Direntry_t $direntrytype |
| |
| /* I_GRP: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <grp.h>. |
| */ |
| /* GRPASSWD: |
| * This symbol, if defined, indicates to the C program that struct group |
| * in <grp.h> contains gr_passwd. |
| */ |
| #$i_grp I_GRP /**/ |
| #$d_grpasswd GRPASSWD /**/ |
| |
| /* I_MACH_CTHREADS: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <mach/cthreads.h>. |
| */ |
| #$i_machcthr I_MACH_CTHREADS /**/ |
| |
| /* I_NDBM: |
| * This symbol, if defined, indicates that <ndbm.h> exists and should |
| * be included. |
| */ |
| /* I_GDBMNDBM: |
| * This symbol, if defined, indicates that <gdbm/ndbm.h> exists and should |
| * be included. This was the location of the ndbm.h compatibility file |
| * in RedHat 7.1. |
| */ |
| /* I_GDBM_NDBM: |
| * This symbol, if defined, indicates that <gdbm-ndbm.h> exists and should |
| * be included. This is the location of the ndbm.h compatibility file |
| * in Debian 4.0. |
| */ |
| /* NDBM_H_USES_PROTOTYPES: |
| * This symbol, if defined, indicates that <ndbm.h> uses real ANSI C |
| * prototypes instead of K&R style function declarations without any |
| * parameter information. While ANSI C prototypes are supported in C++, |
| * K&R style function declarations will yield errors. |
| */ |
| /* GDBMNDBM_H_USES_PROTOTYPES: |
| * This symbol, if defined, indicates that <gdbm/ndbm.h> uses real ANSI C |
| * prototypes instead of K&R style function declarations without any |
| * parameter information. While ANSI C prototypes are supported in C++, |
| * K&R style function declarations will yield errors. |
| */ |
| /* GDBM_NDBM_H_USES_PROTOTYPES: |
| * This symbol, if defined, indicates that <gdbm-ndbm.h> uses real ANSI C |
| * prototypes instead of K&R style function declarations without any |
| * parameter information. While ANSI C prototypes are supported in C++, |
| * K&R style function declarations will yield errors. |
| */ |
| #$i_ndbm I_NDBM /**/ |
| #$i_gdbmndbm I_GDBMNDBM /**/ |
| #$i_gdbm_ndbm I_GDBM_NDBM /**/ |
| #$d_ndbm_h_uses_prototypes NDBM_H_USES_PROTOTYPES /**/ |
| #$d_gdbmndbm_h_uses_prototypes GDBMNDBM_H_USES_PROTOTYPES /**/ |
| #$d_gdbm_ndbm_h_uses_prototypes GDBM_NDBM_H_USES_PROTOTYPES /**/ |
| |
| /* I_NETDB: |
| * This symbol, if defined, indicates that <netdb.h> exists and |
| * should be included. |
| */ |
| #$i_netdb I_NETDB /**/ |
| |
| /* I_NET_ERRNO: |
| * This symbol, if defined, indicates that <net/errno.h> exists and |
| * should be included. |
| */ |
| #$i_neterrno I_NET_ERRNO /**/ |
| |
| /* I_PTHREAD: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <pthread.h>. |
| */ |
| #$i_pthread I_PTHREAD /**/ |
| |
| /* I_PWD: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <pwd.h>. |
| */ |
| /* PWQUOTA: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_quota. |
| */ |
| /* PWAGE: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_age. |
| */ |
| /* PWCHANGE: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_change. |
| */ |
| /* PWCLASS: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_class. |
| */ |
| /* PWEXPIRE: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_expire. |
| */ |
| /* PWCOMMENT: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_comment. |
| */ |
| /* PWGECOS: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_gecos. |
| */ |
| /* PWPASSWD: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_passwd. |
| */ |
| #$i_pwd I_PWD /**/ |
| #$d_pwquota PWQUOTA /**/ |
| #$d_pwage PWAGE /**/ |
| #$d_pwchange PWCHANGE /**/ |
| #$d_pwclass PWCLASS /**/ |
| #$d_pwexpire PWEXPIRE /**/ |
| #$d_pwcomment PWCOMMENT /**/ |
| #$d_pwgecos PWGECOS /**/ |
| #$d_pwpasswd PWPASSWD /**/ |
| |
| /* I_SYS_ACCESS: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/access.h>. |
| */ |
| #$i_sysaccess I_SYS_ACCESS /**/ |
| |
| /* I_SYS_SECURITY: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/security.h>. |
| */ |
| #$i_syssecrt I_SYS_SECURITY /**/ |
| |
| /* I_SYSUIO: |
| * This symbol, if defined, indicates that <sys/uio.h> exists and |
| * should be included. |
| */ |
| #$i_sysuio I_SYSUIO /**/ |
| |
| /* I_TIME: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <time.h>. |
| */ |
| /* I_SYS_TIME: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/time.h>. |
| */ |
| /* I_SYS_TIME_KERNEL: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/time.h> with KERNEL defined. |
| */ |
| /* HAS_TM_TM_ZONE: |
| * This symbol, if defined, indicates to the C program that |
| * the struct tm has a tm_zone field. |
| */ |
| /* HAS_TM_TM_GMTOFF: |
| * This symbol, if defined, indicates to the C program that |
| * the struct tm has a tm_gmtoff field. |
| */ |
| #$i_time I_TIME /**/ |
| #$i_systime I_SYS_TIME /**/ |
| #$i_systimek I_SYS_TIME_KERNEL /**/ |
| #$d_tm_tm_zone HAS_TM_TM_ZONE /**/ |
| #$d_tm_tm_gmtoff HAS_TM_TM_GMTOFF /**/ |
| |
| /* I_STDARG: |
| * This symbol, if defined, indicates that <stdarg.h> exists and should |
| * be included. |
| */ |
| /* I_VARARGS: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <varargs.h>. |
| */ |
| #$i_stdarg I_STDARG /**/ |
| #$i_varargs I_VARARGS /**/ |
| |
| /* PERL_INC_VERSION_LIST: |
| * This variable specifies the list of subdirectories in over |
| * which perl.c:incpush() and lib/lib.pm will automatically |
| * search when adding directories to @INC, in a format suitable |
| * for a C initialization string. See the inc_version_list entry |
| * in Porting/Glossary for more details. |
| */ |
| #$d_inc_version_list PERL_INC_VERSION_LIST $inc_version_list_init /**/ |
| |
| /* INSTALL_USR_BIN_PERL: |
| * This symbol, if defined, indicates that Perl is to be installed |
| * also as /usr/bin/perl. |
| */ |
| #$installusrbinperl INSTALL_USR_BIN_PERL /**/ |
| |
| /* Off_t: |
| * This symbol holds the type used to declare offsets in the kernel. |
| * It can be int, long, off_t, etc... It may be necessary to include |
| * <sys/types.h> to get any typedef'ed information. |
| */ |
| /* LSEEKSIZE: |
| * This symbol holds the number of bytes used by the Off_t. |
| */ |
| /* Off_t_size: |
| * This symbol holds the number of bytes used by the Off_t. |
| */ |
| #define Off_t $lseektype /* <offset> type */ |
| #define LSEEKSIZE $lseeksize /* <offset> size */ |
| #define Off_t_size $lseeksize /* <offset> size */ |
| |
| /* Free_t: |
| * This variable contains the return type of free(). It is usually |
| * void, but occasionally int. |
| */ |
| /* Malloc_t: |
| * This symbol is the type of pointer returned by malloc and realloc. |
| */ |
| #define Malloc_t $malloctype /**/ |
| #define Free_t $freetype /**/ |
| |
| /* PERL_MALLOC_WRAP: |
| * This symbol, if defined, indicates that we'd like malloc wrap checks. |
| */ |
| #$usemallocwrap PERL_MALLOC_WRAP /**/ |
| |
| /* MYMALLOC: |
| * This symbol, if defined, indicates that we're using our own malloc. |
| */ |
| #$d_mymalloc MYMALLOC /**/ |
| |
| /* Mode_t: |
| * This symbol holds the type used to declare file modes |
| * for systems calls. It is usually mode_t, but may be |
| * int or unsigned short. It may be necessary to include <sys/types.h> |
| * to get any typedef'ed information. |
| */ |
| #define Mode_t $modetype /* file mode parameter for system calls */ |
| |
| /* VAL_O_NONBLOCK: |
| * This symbol is to be used during open() or fcntl(F_SETFL) to turn on |
| * non-blocking I/O for the file descriptor. Note that there is no way |
| * back, i.e. you cannot turn it blocking again this way. If you wish to |
| * alternatively switch between blocking and non-blocking, use the |
| * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. |
| */ |
| /* VAL_EAGAIN: |
| * This symbol holds the errno error code set by read() when no data was |
| * present on the non-blocking file descriptor. |
| */ |
| /* RD_NODATA: |
| * This symbol holds the return code from read() when no data is present |
| * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is |
| * not defined, then you can't distinguish between no data and EOF by |
| * issuing a read(). You'll have to find another way to tell for sure! |
| */ |
| /* EOF_NONBLOCK: |
| * This symbol, if defined, indicates to the C program that a read() on |
| * a non-blocking file descriptor will return 0 on EOF, and not the value |
| * held in RD_NODATA (-1 usually, in that case!). |
| */ |
| #define VAL_O_NONBLOCK $o_nonblock |
| #define VAL_EAGAIN $eagain |
| #define RD_NODATA $rd_nodata |
| #$d_eofnblk EOF_NONBLOCK |
| |
| /* Netdb_host_t: |
| * This symbol holds the type used for the 1st argument |
| * to gethostbyaddr(). |
| */ |
| /* Netdb_hlen_t: |
| * This symbol holds the type used for the 2nd argument |
| * to gethostbyaddr(). |
| */ |
| /* Netdb_name_t: |
| * This symbol holds the type used for the argument to |
| * gethostbyname(). |
| */ |
| /* Netdb_net_t: |
| * This symbol holds the type used for the 1st argument to |
| * getnetbyaddr(). |
| */ |
| #define Netdb_host_t $netdb_host_type /**/ |
| #define Netdb_hlen_t $netdb_hlen_type /**/ |
| #define Netdb_name_t $netdb_name_type /**/ |
| #define Netdb_net_t $netdb_net_type /**/ |
| |
| /* PERL_OTHERLIBDIRS: |
| * This variable contains a colon-separated set of paths for the perl |
| * binary to search for additional library files or modules. |
| * These directories will be tacked to the end of @INC. |
| * Perl will automatically search below each path for version- |
| * and architecture-specific directories. See PERL_INC_VERSION_LIST |
| * for more details. |
| */ |
| #$d_perl_otherlibdirs PERL_OTHERLIBDIRS "$otherlibdirs" /**/ |
| |
| /* Pid_t: |
| * This symbol holds the type used to declare process ids in the kernel. |
| * It can be int, uint, pid_t, etc... It may be necessary to include |
| * <sys/types.h> to get any typedef'ed information. |
| */ |
| #define Pid_t $pidtype /* PID type */ |
| |
| /* PRIVLIB: |
| * This symbol contains the name of the private library for this package. |
| * The library is private in the sense that it needn't be in anyone's |
| * execution path, but it should be accessible by the world. The program |
| * should be prepared to do ~ expansion. |
| */ |
| /* PRIVLIB_EXP: |
| * This symbol contains the ~name expanded version of PRIVLIB, to be used |
| * in programs that are not prepared to deal with ~ expansion at run-time. |
| */ |
| #define PRIVLIB "$privlib" /**/ |
| #define PRIVLIB_EXP "$privlibexp" /**/ |
| |
| /* CAN_PROTOTYPE: |
| * If defined, this macro indicates that the C compiler can handle |
| * function prototypes. |
| */ |
| /* _: |
| * This macro is used to declare function parameters for folks who want |
| * to make declarations with prototypes using a different style than |
| * the above macros. Use double parentheses. For example: |
| * |
| * int main _((int argc, char *argv[])); |
| */ |
| #$prototype CAN_PROTOTYPE /**/ |
| #ifdef CAN_PROTOTYPE |
| #define _(args) args |
| #else |
| #define _(args) () |
| #endif |
| |
| /* PTRSIZE: |
| * This symbol contains the size of a pointer, so that the C preprocessor |
| * can make decisions based on it. It will be sizeof(void *) if |
| * the compiler supports (void *); otherwise it will be |
| * sizeof(char *). |
| */ |
| #define PTRSIZE $ptrsize /**/ |
| |
| /* HAS_QUAD: |
| * This symbol, if defined, tells that there's a 64-bit integer type, |
| * Quad_t, and its unsigned counterpart, Uquad_t. QUADKIND will be one |
| * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, QUAD_IS_INT64_T, |
| * or QUAD_IS___INT64. |
| */ |
| #$d_quad HAS_QUAD /**/ |
| #ifdef HAS_QUAD |
| # define Quad_t $quadtype /**/ |
| # define Uquad_t $uquadtype /**/ |
| # define QUADKIND $quadkind /**/ |
| # define QUAD_IS_INT 1 |
| # define QUAD_IS_LONG 2 |
| # define QUAD_IS_LONG_LONG 3 |
| # define QUAD_IS_INT64_T 4 |
| # define QUAD_IS___INT64 5 |
| #endif |
| |
| /* Drand01: |
| * This macro is to be used to generate uniformly distributed |
| * random numbers over the range [0., 1.[. You may have to supply |
| * an 'extern double drand48();' in your program since SunOS 4.1.3 |
| * doesn't provide you with anything relevant in its headers. |
| * See HAS_DRAND48_PROTO. |
| */ |
| /* Rand_seed_t: |
| * This symbol defines the type of the argument of the |
| * random seed function. |
| */ |
| /* seedDrand01: |
| * This symbol defines the macro to be used in seeding the |
| * random number generator (see Drand01). |
| */ |
| /* RANDBITS: |
| * This symbol indicates how many bits are produced by the |
| * function used to generate normalized random numbers. |
| * Values include 15, 16, 31, and 48. |
| */ |
| #define Drand01() $drand01 /**/ |
| #define Rand_seed_t $randseedtype /**/ |
| #define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/ |
| #define RANDBITS $randbits /**/ |
| |
| /* Select_fd_set_t: |
| * This symbol holds the type used for the 2nd, 3rd, and 4th |
| * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET |
| * is defined, and 'int *' otherwise. This is only useful if you |
| * have select(), of course. |
| */ |
| #define Select_fd_set_t $selecttype /**/ |
| |
| /* SH_PATH: |
| * This symbol contains the full pathname to the shell used on this |
| * on this system to execute Bourne shell scripts. Usually, this will be |
| * /bin/sh, though it's possible that some systems will have /bin/ksh, |
| * /bin/pdksh, /bin/ash, /bin/bash, or even something such as |
| * D:/bin/sh.exe. |
| */ |
| #define SH_PATH "$sh" /**/ |
| |
| /* SIG_NAME: |
| * This symbol contains a list of signal names in order of |
| * signal number. This is intended |
| * to be used as a static array initialization, like this: |
| * char *sig_name[] = { SIG_NAME }; |
| * The signals in the list are separated with commas, and each signal |
| * is surrounded by double quotes. There is no leading SIG in the signal |
| * name, i.e. SIGQUIT is known as "QUIT". |
| * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, |
| * etc., where nn is the actual signal number (e.g. NUM37). |
| * The signal number for sig_name[i] is stored in sig_num[i]. |
| * The last element is 0 to terminate the list with a NULL. This |
| * corresponds to the 0 at the end of the sig_name_init list. |
| * Note that this variable is initialized from the sig_name_init, |
| * not from sig_name (which is unused). |
| */ |
| /* SIG_NUM: |
| * This symbol contains a list of signal numbers, in the same order as the |
| * SIG_NAME list. It is suitable for static array initialization, as in: |
| * int sig_num[] = { SIG_NUM }; |
| * The signals in the list are separated with commas, and the indices |
| * within that list and the SIG_NAME list match, so it's easy to compute |
| * the signal name from a number or vice versa at the price of a small |
| * dynamic linear lookup. |
| * Duplicates are allowed, but are moved to the end of the list. |
| * The signal number corresponding to sig_name[i] is sig_number[i]. |
| * if (i < NSIG) then sig_number[i] == i. |
| * The last element is 0, corresponding to the 0 at the end of |
| * the sig_name_init list. |
| * Note that this variable is initialized from the sig_num_init, |
| * not from sig_num (which is unused). |
| */ |
| /* SIG_SIZE: |
| * This variable contains the number of elements of the SIG_NAME |
| * and SIG_NUM arrays, excluding the final NULL entry. |
| */ |
| #define SIG_NAME $sig_name_init /**/ |
| #define SIG_NUM $sig_num_init /**/ |
| #define SIG_SIZE $sig_size /**/ |
| |
| /* SITEARCH: |
| * This symbol contains the name of the private library for this package. |
| * The library is private in the sense that it needn't be in anyone's |
| * execution path, but it should be accessible by the world. The program |
| * should be prepared to do ~ expansion. |
| * The standard distribution will put nothing in this directory. |
| * After perl has been installed, users may install their own local |
| * architecture-dependent modules in this directory with |
| * MakeMaker Makefile.PL |
| * or equivalent. See INSTALL for details. |
| */ |
| /* SITEARCH_EXP: |
| * This symbol contains the ~name expanded version of SITEARCH, to be used |
| * in programs that are not prepared to deal with ~ expansion at run-time. |
| */ |
| #$d_sitearch SITEARCH "$sitearch" /**/ |
| #$d_sitearch SITEARCH_EXP "$sitearchexp" /**/ |
| |
| /* SITELIB: |
| * This symbol contains the name of the private library for this package. |
| * The library is private in the sense that it needn't be in anyone's |
| * execution path, but it should be accessible by the world. The program |
| * should be prepared to do ~ expansion. |
| * The standard distribution will put nothing in this directory. |
| * After perl has been installed, users may install their own local |
| * architecture-independent modules in this directory with |
| * MakeMaker Makefile.PL |
| * or equivalent. See INSTALL for details. |
| */ |
| /* SITELIB_EXP: |
| * This symbol contains the ~name expanded version of SITELIB, to be used |
| * in programs that are not prepared to deal with ~ expansion at run-time. |
| */ |
| /* SITELIB_STEM: |
| * This define is SITELIB_EXP with any trailing version-specific component |
| * removed. The elements in inc_version_list (inc_version_list.U) can |
| * be tacked onto this variable to generate a list of directories to search. |
| */ |
| #define SITELIB "$sitelib" /**/ |
| #define SITELIB_EXP "$sitelibexp" /**/ |
| #define SITELIB_STEM "$sitelib_stem" /**/ |
| |
| /* Size_t_size: |
| * This symbol holds the size of a Size_t in bytes. |
| */ |
| #define Size_t_size $sizesize /**/ |
| |
| /* Size_t: |
| * This symbol holds the type used to declare length parameters |
| * for string functions. It is usually size_t, but may be |
| * unsigned long, int, etc. It may be necessary to include |
| * <sys/types.h> to get any typedef'ed information. |
| */ |
| #define Size_t $sizetype /* length parameter for string functions */ |
| |
| /* Sock_size_t: |
| * This symbol holds the type used for the size argument of |
| * various socket calls (just the base type, not the pointer-to). |
| */ |
| #define Sock_size_t $socksizetype /**/ |
| |
| /* SSize_t: |
| * This symbol holds the type used by functions that return |
| * a count of bytes or an error condition. It must be a signed type. |
| * It is usually ssize_t, but may be long or int, etc. |
| * It may be necessary to include <sys/types.h> or <unistd.h> |
| * to get any typedef'ed information. |
| * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). |
| */ |
| #define SSize_t $ssizetype /* signed count of bytes */ |
| |
| /* STDCHAR: |
| * This symbol is defined to be the type of char used in stdio.h. |
| * It has the values "unsigned char" or "char". |
| */ |
| #define STDCHAR $stdchar /**/ |
| |
| /* Uid_t_f: |
| * This symbol defines the format string used for printing a Uid_t. |
| */ |
| #define Uid_t_f $uidformat /**/ |
| |
| /* Uid_t_sign: |
| * This symbol holds the signedess of a Uid_t. |
| * 1 for unsigned, -1 for signed. |
| */ |
| #define Uid_t_sign $uidsign /* UID sign */ |
| |
| /* Uid_t_size: |
| * This symbol holds the size of a Uid_t in bytes. |
| */ |
| #define Uid_t_size $uidsize /* UID size */ |
| |
| /* Uid_t: |
| * This symbol holds the type used to declare user ids in the kernel. |
| * It can be int, ushort, uid_t, etc... It may be necessary to include |
| * <sys/types.h> to get any typedef'ed information. |
| */ |
| #define Uid_t $uidtype /* UID type */ |
| |
| /* USE_ITHREADS: |
| * This symbol, if defined, indicates that Perl should be built to |
| * use the interpreter-based threading implementation. |
| */ |
| /* USE_5005THREADS: |
| * This symbol, if defined, indicates that Perl should be built to |
| * use the 5.005-based threading implementation. |
| * Only valid up to 5.8.x. |
| */ |
| /* OLD_PTHREADS_API: |
| * This symbol, if defined, indicates that Perl should |
| * be built to use the old draft POSIX threads API. |
| */ |
| /* USE_REENTRANT_API: |
| * This symbol, if defined, indicates that Perl should |
| * try to use the various _r versions of library functions. |
| * This is extremely experimental. |
| */ |
| #$use5005threads USE_5005THREADS /**/ |
| #$useithreads USE_ITHREADS /**/ |
| #if defined(USE_5005THREADS) && !defined(USE_ITHREADS) |
| #define USE_THREADS /* until src is revised*/ |
| #endif |
| #$d_oldpthreads OLD_PTHREADS_API /**/ |
| #$usereentrant USE_REENTRANT_API /**/ |
| |
| /* PERL_VENDORARCH: |
| * If defined, this symbol contains the name of a private library. |
| * The library is private in the sense that it needn't be in anyone's |
| * execution path, but it should be accessible by the world. |
| * It may have a ~ on the front. |
| * The standard distribution will put nothing in this directory. |
| * Vendors who distribute perl may wish to place their own |
| * architecture-dependent modules and extensions in this directory with |
| * MakeMaker Makefile.PL INSTALLDIRS=vendor |
| * or equivalent. See INSTALL for details. |
| */ |
| /* PERL_VENDORARCH_EXP: |
| * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used |
| * in programs that are not prepared to deal with ~ expansion at run-time. |
| */ |
| #$d_vendorarch PERL_VENDORARCH "$vendorarch" /**/ |
| #$d_vendorarch PERL_VENDORARCH_EXP "$vendorarchexp" /**/ |
| |
| /* PERL_VENDORLIB_EXP: |
| * This symbol contains the ~name expanded version of VENDORLIB, to be used |
| * in programs that are not prepared to deal with ~ expansion at run-time. |
| */ |
| /* PERL_VENDORLIB_STEM: |
| * This define is PERL_VENDORLIB_EXP with any trailing version-specific component |
| * removed. The elements in inc_version_list (inc_version_list.U) can |
| * be tacked onto this variable to generate a list of directories to search. |
| */ |
| #$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp" /**/ |
| #$d_vendorlib PERL_VENDORLIB_STEM "$vendorlib_stem" /**/ |
| |
| /* VOIDFLAGS: |
| * This symbol indicates how much support of the void type is given by this |
| * compiler. What various bits mean: |
| * |
| * 1 = supports declaration of void |
| * 2 = supports arrays of pointers to functions returning void |
| * 4 = supports comparisons between pointers to void functions and |
| * addresses of void functions |
| * 8 = supports declaration of generic void pointers |
| * |
| * The package designer should define VOIDUSED to indicate the requirements |
| * of the package. This can be done either by #defining VOIDUSED before |
| * including config.h, or by defining defvoidused in Myinit.U. If the |
| * latter approach is taken, only those flags will be tested. If the |
| * level of void support necessary is not present, defines void to int. |
| */ |
| #ifndef VOIDUSED |
| #define VOIDUSED $defvoidused |
| #endif |
| #define VOIDFLAGS $voidflags |
| #if (VOIDFLAGS & VOIDUSED) != VOIDUSED |
| #define void int /* is void to be avoided? */ |
| #define M_VOID /* Xenix strikes again */ |
| #endif |
| |
| /* PERL_USE_DEVEL: |
| * This symbol, if defined, indicates that Perl was configured with |
| * -Dusedevel, to enable development features. This should not be |
| * done for production builds. |
| */ |
| #$usedevel PERL_USE_DEVEL /**/ |
| |
| /* HAS_ATOLF: |
| * This symbol, if defined, indicates that the atolf routine is |
| * available to convert strings into long doubles. |
| */ |
| #$d_atolf HAS_ATOLF /**/ |
| |
| /* HAS_ATOLL: |
| * This symbol, if defined, indicates that the atoll routine is |
| * available to convert strings into long longs. |
| */ |
| #$d_atoll HAS_ATOLL /**/ |
| |
| /* HAS__FWALK: |
| * This symbol, if defined, indicates that the _fwalk system call is |
| * available to apply a function to all the file handles. |
| */ |
| #$d__fwalk HAS__FWALK /**/ |
| |
| /* HAS_AINTL: |
| * This symbol, if defined, indicates that the aintl routine is |
| * available. If copysignl is also present we can emulate modfl. |
| */ |
| #$d_aintl HAS_AINTL /**/ |
| |
| /* HAS_BUILTIN_CHOOSE_EXPR: |
| * Can we handle GCC builtin for compile-time ternary-like expressions |
| */ |
| /* HAS_BUILTIN_EXPECT: |
| * Can we handle GCC builtin for telling that certain values are more |
| * likely |
| */ |
| #$d_builtin_expect HAS_BUILTIN_EXPECT /**/ |
| #$d_builtin_choose_expr HAS_BUILTIN_CHOOSE_EXPR /**/ |
| |
| /* HAS_C99_VARIADIC_MACROS: |
| * If defined, the compiler supports C99 variadic macros. |
| */ |
| #$d_c99_variadic_macros HAS_C99_VARIADIC_MACROS /**/ |
| |
| /* HAS_CLASS: |
| * This symbol, if defined, indicates that the class routine is |
| * available to classify doubles. Available for example in AIX. |
| * The returned values are defined in <float.h> and are: |
| * |
| * FP_PLUS_NORM Positive normalized, nonzero |
| * FP_MINUS_NORM Negative normalized, nonzero |
| * FP_PLUS_DENORM Positive denormalized, nonzero |
| * FP_MINUS_DENORM Negative denormalized, nonzero |
| * FP_PLUS_ZERO +0.0 |
| * FP_MINUS_ZERO -0.0 |
| * FP_PLUS_INF +INF |
| * FP_MINUS_INF -INF |
| * FP_NANS Signaling Not a Number (NaNS) |
| * FP_NANQ Quiet Not a Number (NaNQ) |
| */ |
| #$d_class HAS_CLASS /**/ |
| |
| /* HAS_CLEARENV: |
| * This symbol, if defined, indicates that the clearenv () routine is |
| * available for use. |
| */ |
| #$d_clearenv HAS_CLEARENV /**/ |
| |
| /* HAS_STRUCT_CMSGHDR: |
| * This symbol, if defined, indicates that the struct cmsghdr |
| * is supported. |
| */ |
| #$d_cmsghdr_s HAS_STRUCT_CMSGHDR /**/ |
| |
| /* HAS_COPYSIGNL: |
| * This symbol, if defined, indicates that the copysignl routine is |
| * available. If aintl is also present we can emulate modfl. |
| */ |
| #$d_copysignl HAS_COPYSIGNL /**/ |
| |
| /* USE_CPLUSPLUS: |
| * This symbol, if defined, indicates that a C++ compiler was |
| * used to compiled Perl and will be used to compile extensions. |
| */ |
| #$d_cplusplus USE_CPLUSPLUS /**/ |
| |
| /* HAS_DBMINIT_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the dbminit() function. Otherwise, it is up |
| * to the program to supply one. A good guess is |
| * extern int dbminit(char *); |
| */ |
| #$d_dbminitproto HAS_DBMINIT_PROTO /**/ |
| |
| /* HAS_DIR_DD_FD: |
| * This symbol, if defined, indicates that the the DIR* dirstream |
| * structure contains a member variable named dd_fd. |
| */ |
| #$d_dir_dd_fd HAS_DIR_DD_FD /**/ |
| |
| /* HAS_DIRFD: |
| * This manifest constant lets the C program know that dirfd |
| * is available. |
| */ |
| #$d_dirfd HAS_DIRFD /**/ |
| |
| /* DLSYM_NEEDS_UNDERSCORE: |
| * This symbol, if defined, indicates that we need to prepend an |
| * underscore to the symbol name before calling dlsym(). This only |
| * makes sense if you *have* dlsym, which we will presume is the |
| * case if you're using dl_dlopen.xs. |
| */ |
| #$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/ |
| |
| /* HAS_FAST_STDIO: |
| * This symbol, if defined, indicates that the "fast stdio" |
| * is available to manipulate the stdio buffers directly. |
| */ |
| #$d_faststdio HAS_FAST_STDIO /**/ |
| |
| /* HAS_FCHDIR: |
| * This symbol, if defined, indicates that the fchdir routine is |
| * available to change directory using a file descriptor. |
| */ |
| #$d_fchdir HAS_FCHDIR /**/ |
| |
| /* FCNTL_CAN_LOCK: |
| * This symbol, if defined, indicates that fcntl() can be used |
| * for file locking. Normally on Unix systems this is defined. |
| * It may be undefined on VMS. |
| */ |
| #$d_fcntl_can_lock FCNTL_CAN_LOCK /**/ |
| |
| /* HAS_FINITE: |
| * This symbol, if defined, indicates that the finite routine is |
| * available to check whether a double is finite (non-infinity non-NaN). |
| */ |
| #$d_finite HAS_FINITE /**/ |
| |
| /* HAS_FINITEL: |
| * This symbol, if defined, indicates that the finitel routine is |
| * available to check whether a long double is finite |
| * (non-infinity non-NaN). |
| */ |
| #$d_finitel HAS_FINITEL /**/ |
| |
| /* HAS_FLOCK_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the flock() function. Otherwise, it is up |
| * to the program to supply one. A good guess is |
| * extern int flock(int, int); |
| */ |
| #$d_flockproto HAS_FLOCK_PROTO /**/ |
| |
| /* HAS_FP_CLASS: |
| * This symbol, if defined, indicates that the fp_class routine is |
| * available to classify doubles. Available for example in Digital UNIX. |
| * The returned values are defined in <math.h> and are: |
| * |
| * FP_SNAN Signaling NaN (Not-a-Number) |
| * FP_QNAN Quiet NaN (Not-a-Number) |
| * FP_POS_INF +infinity |
| * FP_NEG_INF -infinity |
| * FP_POS_NORM Positive normalized |
| * FP_NEG_NORM Negative normalized |
| * FP_POS_DENORM Positive denormalized |
| * FP_NEG_DENORM Negative denormalized |
| * FP_POS_ZERO +0.0 (positive zero) |
| * FP_NEG_ZERO -0.0 (negative zero) |
| */ |
| #$d_fp_class HAS_FP_CLASS /**/ |
| |
| /* HAS_FPCLASS: |
| * This symbol, if defined, indicates that the fpclass routine is |
| * available to classify doubles. Available for example in Solaris/SVR4. |
| * The returned values are defined in <ieeefp.h> and are: |
| * |
| * FP_SNAN signaling NaN |
| * FP_QNAN quiet NaN |
| * FP_NINF negative infinity |
| * FP_PINF positive infinity |
| * FP_NDENORM negative denormalized non-zero |
| * FP_PDENORM positive denormalized non-zero |
| * FP_NZERO negative zero |
| * FP_PZERO positive zero |
| * FP_NNORM negative normalized non-zero |
| * FP_PNORM positive normalized non-zero |
| */ |
| #$d_fpclass HAS_FPCLASS /**/ |
| |
| /* HAS_FPCLASSIFY: |
| * This symbol, if defined, indicates that the fpclassify routine is |
| * available to classify doubles. Available for example in HP-UX. |
| * The returned values are defined in <math.h> and are |
| * |
| * FP_NORMAL Normalized |
| * FP_ZERO Zero |
| * FP_INFINITE Infinity |
| * FP_SUBNORMAL Denormalized |
| * FP_NAN NaN |
| * |
| */ |
| #$d_fpclassify HAS_FPCLASSIFY /**/ |
| |
| /* HAS_FPCLASSL: |
| * This symbol, if defined, indicates that the fpclassl routine is |
| * available to classify long doubles. Available for example in IRIX. |
| * The returned values are defined in <ieeefp.h> and are: |
| * |
| * FP_SNAN signaling NaN |
| * FP_QNAN quiet NaN |
| * FP_NINF negative infinity |
| * FP_PINF positive infinity |
| * FP_NDENORM negative denormalized non-zero |
| * FP_PDENORM positive denormalized non-zero |
| * FP_NZERO negative zero |
| * FP_PZERO positive zero |
| * FP_NNORM negative normalized non-zero |
| * FP_PNORM positive normalized non-zero |
| */ |
| #$d_fpclassl HAS_FPCLASSL /**/ |
| |
| /* HAS_FPOS64_T: |
| * This symbol will be defined if the C compiler supports fpos64_t. |
| */ |
| #$d_fpos64_t HAS_FPOS64_T /**/ |
| |
| /* HAS_FREXPL: |
| * This symbol, if defined, indicates that the frexpl routine is |
| * available to break a long double floating-point number into |
| * a normalized fraction and an integral power of 2. |
| */ |
| #$d_frexpl HAS_FREXPL /**/ |
| |
| /* HAS_STRUCT_FS_DATA: |
| * This symbol, if defined, indicates that the struct fs_data |
| * to do statfs() is supported. |
| */ |
| #$d_fs_data_s HAS_STRUCT_FS_DATA /**/ |
| |
| /* HAS_FSEEKO: |
| * This symbol, if defined, indicates that the fseeko routine is |
| * available to fseek beyond 32 bits (useful for ILP32 hosts). |
| */ |
| #$d_fseeko HAS_FSEEKO /**/ |
| |
| /* HAS_FSTATFS: |
| * This symbol, if defined, indicates that the fstatfs routine is |
| * available to stat filesystems by file descriptors. |
| */ |
| #$d_fstatfs HAS_FSTATFS /**/ |
| |
| /* HAS_FSYNC: |
| * This symbol, if defined, indicates that the fsync routine is |
| * available to write a file's modified data and attributes to |
| * permanent storage. |
| */ |
| #$d_fsync HAS_FSYNC /**/ |
| |
| /* HAS_FTELLO: |
| * This symbol, if defined, indicates that the ftello routine is |
| * available to ftell beyond 32 bits (useful for ILP32 hosts). |
| */ |
| #$d_ftello HAS_FTELLO /**/ |
| |
| /* HAS_FUTIMES: |
| * This symbol, if defined, indicates that the futimes routine is |
| * available to change file descriptor time stamps with struct timevals. |
| */ |
| #$d_futimes HAS_FUTIMES /**/ |
| |
| /* HAS_GETADDRINFO: |
| * This symbol, if defined, indicates that the getaddrinfo() function |
| * is available for use. |
| */ |
| #$d_getaddrinfo HAS_GETADDRINFO /**/ |
| |
| /* HAS_GETCWD: |
| * This symbol, if defined, indicates that the getcwd routine is |
| * available to get the current working directory. |
| */ |
| #$d_getcwd HAS_GETCWD /**/ |
| |
| /* HAS_GETESPWNAM: |
| * This symbol, if defined, indicates that the getespwnam system call is |
| * available to retrieve enhanced (shadow) password entries by name. |
| */ |
| #$d_getespwnam HAS_GETESPWNAM /**/ |
| |
| /* HAS_GETFSSTAT: |
| * This symbol, if defined, indicates that the getfsstat routine is |
| * available to stat filesystems in bulk. |
| */ |
| #$d_getfsstat HAS_GETFSSTAT /**/ |
| |
| /* HAS_GETITIMER: |
| * This symbol, if defined, indicates that the getitimer routine is |
| * available to return interval timers. |
| */ |
| #$d_getitimer HAS_GETITIMER /**/ |
| |
| /* HAS_GETMNT: |
| * This symbol, if defined, indicates that the getmnt routine is |
| * available to get filesystem mount info by filename. |
| */ |
| #$d_getmnt HAS_GETMNT /**/ |
| |
| /* HAS_GETMNTENT: |
| * This symbol, if defined, indicates that the getmntent routine is |
| * available to iterate through mounted file systems to get their info. |
| */ |
| #$d_getmntent HAS_GETMNTENT /**/ |
| |
| /* HAS_GETNAMEINFO: |
| * This symbol, if defined, indicates that the getnameinfo() function |
| * is available for use. |
| */ |
| #$d_getnameinfo HAS_GETNAMEINFO /**/ |
| |
| /* HAS_GETPRPWNAM: |
| * This symbol, if defined, indicates that the getprpwnam system call is |
| * available to retrieve protected (shadow) password entries by name. |
| */ |
| #$d_getprpwnam HAS_GETPRPWNAM /**/ |
| |
| /* HAS_GETSPNAM: |
| * This symbol, if defined, indicates that the getspnam system call is |
| * available to retrieve SysV shadow password entries by name. |
| */ |
| #$d_getspnam HAS_GETSPNAM /**/ |
| |
| /* HAS_HASMNTOPT: |
| * This symbol, if defined, indicates that the hasmntopt routine is |
| * available to query the mount options of file systems. |
| */ |
| #$d_hasmntopt HAS_HASMNTOPT /**/ |
| |
| /* HAS_ILOGBL: |
| * This symbol, if defined, indicates that the ilogbl routine is |
| * available. If scalbnl is also present we can emulate frexpl. |
| */ |
| #$d_ilogbl HAS_ILOGBL /**/ |
| |
| /* HAS_INETNTOP: |
| * This symbol, if defined, indicates that the inet_ntop() function |
| * is available to parse IPv4 and IPv6 strings. |
| */ |
| #$d_inetntop HAS_INETNTOP /**/ |
| |
| /* HAS_INETPTON: |
| * This symbol, if defined, indicates that the inet_pton() function |
| * is available to parse IPv4 and IPv6 strings. |
| */ |
| #$d_inetpton HAS_INETPTON /**/ |
| |
| /* HAS_INT64_T: |
| * This symbol will defined if the C compiler supports int64_t. |
| * Usually the <inttypes.h> needs to be included, but sometimes |
| * <sys/types.h> is enough. |
| */ |
| #$d_int64_t HAS_INT64_T /**/ |
| |
| /* HAS_ISBLANK: |
| * This manifest constant lets the C program know that isblank |
| * is available. |
| */ |
| #$d_isblank HAS_ISBLANK /**/ |
| |
| /* HAS_ISFINITE: |
| * This symbol, if defined, indicates that the isfinite routine is |
| * available to check whether a double is finite (non-infinity non-NaN). |
| */ |
| #$d_isfinite HAS_ISFINITE /**/ |
| |
| /* HAS_ISINF: |
| * This symbol, if defined, indicates that the isinf routine is |
| * available to check whether a double is an infinity. |
| */ |
| #$d_isinf HAS_ISINF /**/ |
| |
| /* HAS_ISNAN: |
| * This symbol, if defined, indicates that the isnan routine is |
| * available to check whether a double is a NaN. |
| */ |
| #$d_isnan HAS_ISNAN /**/ |
| |
| /* HAS_ISNANL: |
| * This symbol, if defined, indicates that the isnanl routine is |
| * available to check whether a long double is a NaN. |
| */ |
| #$d_isnanl HAS_ISNANL /**/ |
| |
| /* HAS_LDBL_DIG: |
| * This symbol, if defined, indicates that this system's <float.h> |
| * or <limits.h> defines the symbol LDBL_DIG, which is the number |
| * of significant digits in a long double precision number. Unlike |
| * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. |
| */ |
| #$d_ldbl_dig HAS_LDBL_DIG /* */ |
| |
| /* LIBM_LIB_VERSION: |
| * This symbol, if defined, indicates that libm exports _LIB_VERSION |
| * and that math.h defines the enum to manipulate it. |
| */ |
| #$d_libm_lib_version LIBM_LIB_VERSION /**/ |
| |
| /* HAS_MADVISE: |
| * This symbol, if defined, indicates that the madvise system call is |
| * available to map a file into memory. |
| */ |
| #$d_madvise HAS_MADVISE /**/ |
| |
| /* HAS_MALLOC_SIZE: |
| * This symbol, if defined, indicates that the malloc_size |
| * routine is available for use. |
| */ |
| #$d_malloc_size HAS_MALLOC_SIZE /**/ |
| |
| /* HAS_MALLOC_GOOD_SIZE: |
| * This symbol, if defined, indicates that the malloc_good_size |
| * routine is available for use. |
| */ |
| #$d_malloc_good_size HAS_MALLOC_GOOD_SIZE /**/ |
| |
| /* HAS_MKDTEMP: |
| * This symbol, if defined, indicates that the mkdtemp routine is |
| * available to exclusively create a uniquely named temporary directory. |
| */ |
| #$d_mkdtemp HAS_MKDTEMP /**/ |
| |
| /* HAS_MKSTEMPS: |
| * This symbol, if defined, indicates that the mkstemps routine is |
| * available to exclusively create and open a uniquely named |
| * (with a suffix) temporary file. |
| */ |
| #$d_mkstemps HAS_MKSTEMPS /**/ |
| |
| /* HAS_MODFL: |
| * This symbol, if defined, indicates that the modfl routine is |
| * available to split a long double x into a fractional part f and |
| * an integer part i such that |f| < 1.0 and (f + i) = x. |
| */ |
| /* HAS_MODFL_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the modfl() function. Otherwise, it is up |
| * to the program to supply one. |
| */ |
| /* HAS_MODFL_POW32_BUG: |
| * This symbol, if defined, indicates that the modfl routine is |
| * broken for long doubles >= pow(2, 32). |
| * For example from 4294967303.150000 one would get 4294967302.000000 |
| * and 1.150000. The bug has been seen in certain versions of glibc, |
| * release 2.2.2 is known to be okay. |
| */ |
| #$d_modfl HAS_MODFL /**/ |
| #$d_modflproto HAS_MODFL_PROTO /**/ |
| #$d_modfl_pow32_bug HAS_MODFL_POW32_BUG /**/ |
| |
| /* HAS_MPROTECT: |
| * This symbol, if defined, indicates that the mprotect system call is |
| * available to modify the access protection of a memory mapped file. |
| */ |
| #$d_mprotect HAS_MPROTECT /**/ |
| |
| /* HAS_STRUCT_MSGHDR: |
| * This symbol, if defined, indicates that the struct msghdr |
| * is supported. |
| */ |
| #$d_msghdr_s HAS_STRUCT_MSGHDR /**/ |
| |
| /* HAS_NL_LANGINFO: |
| * This symbol, if defined, indicates that the nl_langinfo routine is |
| * available to return local data. You will also need <langinfo.h> |
| * and therefore I_LANGINFO. |
| */ |
| #$d_nl_langinfo HAS_NL_LANGINFO /**/ |
| |
| /* HAS_OFF64_T: |
| * This symbol will be defined if the C compiler supports off64_t. |
| */ |
| #$d_off64_t HAS_OFF64_T /**/ |
| |
| /* HAS_PRCTL: |
| * This symbol, if defined, indicates that the prctl routine is |
| * available to set process title. |
| */ |
| /* HAS_PRCTL_SET_NAME: |
| * This symbol, if defined, indicates that the prctl routine is |
| * available to set process title and supports PR_SET_NAME. |
| */ |
| #$d_prctl HAS_PRCTL /**/ |
| #$d_prctl_set_name HAS_PRCTL_SET_NAME /**/ |
| |
| /* HAS_PROCSELFEXE: |
| * This symbol is defined if PROCSELFEXE_PATH is a symlink |
| * to the absolute pathname of the executing program. |
| */ |
| /* PROCSELFEXE_PATH: |
| * If HAS_PROCSELFEXE is defined this symbol is the filename |
| * of the symbolic link pointing to the absolute pathname of |
| * the executing program. |
| */ |
| #$d_procselfexe HAS_PROCSELFEXE /**/ |
| #if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH) |
| #define PROCSELFEXE_PATH $procselfexe /**/ |
| #endif |
| |
| /* HAS_PTHREAD_ATTR_SETSCOPE: |
| * This symbol, if defined, indicates that the pthread_attr_setscope |
| * system call is available to set the contention scope attribute of |
| * a thread attribute object. |
| */ |
| #$d_pthread_attr_setscope HAS_PTHREAD_ATTR_SETSCOPE /**/ |
| |
| /* HAS_READV: |
| * This symbol, if defined, indicates that the readv routine is |
| * available to do gather reads. You will also need <sys/uio.h> |
| * and there I_SYSUIO. |
| */ |
| #$d_readv HAS_READV /**/ |
| |
| /* HAS_RECVMSG: |
| * This symbol, if defined, indicates that the recvmsg routine is |
| * available to send structured socket messages. |
| */ |
| #$d_recvmsg HAS_RECVMSG /**/ |
| |
| /* HAS_SBRK_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the sbrk() function. Otherwise, it is up |
| * to the program to supply one. Good guesses are |
| * extern void* sbrk(int); |
| * extern void* sbrk(size_t); |
| */ |
| #$d_sbrkproto HAS_SBRK_PROTO /**/ |
| |
| /* HAS_SCALBNL: |
| * This symbol, if defined, indicates that the scalbnl routine is |
| * available. If ilogbl is also present we can emulate frexpl. |
| */ |
| #$d_scalbnl HAS_SCALBNL /**/ |
| |
| /* HAS_SENDMSG: |
| * This symbol, if defined, indicates that the sendmsg routine is |
| * available to send structured socket messages. |
| */ |
| #$d_sendmsg HAS_SENDMSG /**/ |
| |
| /* HAS_SETITIMER: |
| * This symbol, if defined, indicates that the setitimer routine is |
| * available to set interval timers. |
| */ |
| #$d_setitimer HAS_SETITIMER /**/ |
| |
| /* HAS_SETPROCTITLE: |
| * This symbol, if defined, indicates that the setproctitle routine is |
| * available to set process title. |
| */ |
| #$d_setproctitle HAS_SETPROCTITLE /**/ |
| |
| /* USE_SFIO: |
| * This symbol, if defined, indicates that sfio should |
| * be used. |
| */ |
| #$d_sfio USE_SFIO /**/ |
| |
| /* HAS_SIGNBIT: |
| * This symbol, if defined, indicates that the signbit routine is |
| * available to check if the given number has the sign bit set. |
| * This should include correct testing of -0.0. This will only be set |
| * if the signbit() routine is safe to use with the NV type used internally |
| * in perl. Users should call Perl_signbit(), which will be #defined to |
| * the system's signbit() function or macro if this symbol is defined. |
| */ |
| #$d_signbit HAS_SIGNBIT /**/ |
| |
| /* HAS_SIGPROCMASK: |
| * This symbol, if defined, indicates that the sigprocmask |
| * system call is available to examine or change the signal mask |
| * of the calling process. |
| */ |
| #$d_sigprocmask HAS_SIGPROCMASK /**/ |
| |
| /* USE_SITECUSTOMIZE: |
| * This symbol, if defined, indicates that sitecustomize should |
| * be used. |
| */ |
| #ifndef USE_SITECUSTOMIZE |
| #$usesitecustomize USE_SITECUSTOMIZE /**/ |
| #endif |
| |
| /* HAS_SNPRINTF: |
| * This symbol, if defined, indicates that the snprintf () library |
| * function is available for use. |
| */ |
| /* HAS_VSNPRINTF: |
| * This symbol, if defined, indicates that the vsnprintf () library |
| * function is available for use. |
| */ |
| #$d_snprintf HAS_SNPRINTF /**/ |
| #$d_vsnprintf HAS_VSNPRINTF /**/ |
| |
| /* HAS_SOCKATMARK: |
| * This symbol, if defined, indicates that the sockatmark routine is |
| * available to test whether a socket is at the out-of-band mark. |
| */ |
| #$d_sockatmark HAS_SOCKATMARK /**/ |
| |
| /* HAS_SOCKATMARK_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the sockatmark() function. Otherwise, it is up |
| * to the program to supply one. A good guess is |
| * extern int sockatmark(int); |
| */ |
| #$d_sockatmarkproto HAS_SOCKATMARK_PROTO /**/ |
| |
| /* HAS_SOCKS5_INIT: |
| * This symbol, if defined, indicates that the socks5_init routine is |
| * available to initialize SOCKS 5. |
| */ |
| #$d_socks5_init HAS_SOCKS5_INIT /**/ |
| |
| /* SPRINTF_RETURNS_STRLEN: |
| * This variable defines whether sprintf returns the length of the string |
| * (as per the ANSI spec). Some C libraries retain compatibility with |
| * pre-ANSI C and return a pointer to the passed in buffer; for these |
| * this variable will be undef. |
| */ |
| #$d_sprintf_returns_strlen SPRINTF_RETURNS_STRLEN /**/ |
| |
| /* HAS_SQRTL: |
| * This symbol, if defined, indicates that the sqrtl routine is |
| * available to do long double square roots. |
| */ |
| #$d_sqrtl HAS_SQRTL /**/ |
| |
| /* HAS_SETRESGID_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the setresgid() function. Otherwise, it is up |
| * to the program to supply one. Good guesses are |
| * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid); |
| */ |
| #$d_sresgproto HAS_SETRESGID_PROTO /**/ |
| |
| /* HAS_SETRESUID_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the setresuid() function. Otherwise, it is up |
| * to the program to supply one. Good guesses are |
| * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid); |
| */ |
| #$d_sresuproto HAS_SETRESUID_PROTO /**/ |
| |
| /* HAS_STRUCT_STATFS_F_FLAGS: |
| * This symbol, if defined, indicates that the struct statfs |
| * does have the f_flags member containing the mount flags of |
| * the filesystem containing the file. |
| * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3), |
| * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not |
| * have statfs() and struct statfs, they have ustat() and getmnt() |
| * with struct ustat and struct fs_data. |
| */ |
| #$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS /**/ |
| |
| /* HAS_STRUCT_STATFS: |
| * This symbol, if defined, indicates that the struct statfs |
| * to do statfs() is supported. |
| */ |
| #$d_statfs_s HAS_STRUCT_STATFS /**/ |
| |
| /* HAS_FSTATVFS: |
| * This symbol, if defined, indicates that the fstatvfs routine is |
| * available to stat filesystems by file descriptors. |
| */ |
| #$d_fstatvfs HAS_FSTATVFS /**/ |
| |
| /* HAS_STRFTIME: |
| * This symbol, if defined, indicates that the strftime routine is |
| * available to do time formatting. |
| */ |
| #$d_strftime HAS_STRFTIME /**/ |
| |
| /* HAS_STRLCAT: |
| * This symbol, if defined, indicates that the strlcat () routine is |
| * available to do string concatenation. |
| */ |
| #$d_strlcat HAS_STRLCAT /**/ |
| |
| /* HAS_STRLCPY: |
| * This symbol, if defined, indicates that the strlcpy () routine is |
| * available to do string copying. |
| */ |
| #$d_strlcpy HAS_STRLCPY /**/ |
| |
| /* HAS_STRTOLD: |
| * This symbol, if defined, indicates that the strtold routine is |
| * available to convert strings to long doubles. |
| */ |
| #$d_strtold HAS_STRTOLD /**/ |
| |
| /* HAS_STRTOLL: |
| * This symbol, if defined, indicates that the strtoll routine is |
| * available to convert strings to long longs. |
| */ |
| #$d_strtoll HAS_STRTOLL /**/ |
| |
| /* HAS_STRTOQ: |
| * This symbol, if defined, indicates that the strtoq routine is |
| * available to convert strings to long longs (quads). |
| */ |
| #$d_strtoq HAS_STRTOQ /**/ |
| |
| /* HAS_STRTOULL: |
| * This symbol, if defined, indicates that the strtoull routine is |
| * available to convert strings to unsigned long longs. |
| */ |
| #$d_strtoull HAS_STRTOULL /**/ |
| |
| /* HAS_STRTOUQ: |
| * This symbol, if defined, indicates that the strtouq routine is |
| * available to convert strings to unsigned long longs (quads). |
| */ |
| #$d_strtouq HAS_STRTOUQ /**/ |
| |
| /* HAS_SYSCALL_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the syscall() function. Otherwise, it is up |
| * to the program to supply one. Good guesses are |
| * extern int syscall(int, ...); |
| * extern int syscall(long, ...); |
| */ |
| #$d_syscallproto HAS_SYSCALL_PROTO /**/ |
| |
| /* HAS_TELLDIR_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the telldir() function. Otherwise, it is up |
| * to the program to supply one. A good guess is |
| * extern long telldir(DIR*); |
| */ |
| #$d_telldirproto HAS_TELLDIR_PROTO /**/ |
| |
| /* HAS_CTIME64: |
| * This symbol, if defined, indicates that the ctime64 () routine is |
| * available to do the 64bit variant of ctime () |
| */ |
| /* HAS_LOCALTIME64: |
| * This symbol, if defined, indicates that the localtime64 () routine is |
| * available to do the 64bit variant of localtime () |
| */ |
| /* HAS_GMTIME64: |
| * This symbol, if defined, indicates that the gmtime64 () routine is |
| * available to do the 64bit variant of gmtime () |
| */ |
| /* HAS_MKTIME64: |
| * This symbol, if defined, indicates that the mktime64 () routine is |
| * available to do the 64bit variant of mktime () |
| */ |
| /* HAS_DIFFTIME64: |
| * This symbol, if defined, indicates that the difftime64 () routine is |
| * available to do the 64bit variant of difftime () |
| */ |
| /* HAS_ASCTIME64: |
| * This symbol, if defined, indicates that the asctime64 () routine is |
| * available to do the 64bit variant of asctime () |
| */ |
| #$d_ctime64 HAS_CTIME64 /**/ |
| #$d_localtime64 HAS_LOCALTIME64 /**/ |
| #$d_gmtime64 HAS_GMTIME64 /**/ |
| #$d_mktime64 HAS_MKTIME64 /**/ |
| #$d_difftime64 HAS_DIFFTIME64 /**/ |
| #$d_asctime64 HAS_ASCTIME64 /**/ |
| |
| /* HAS_TIMEGM: |
| * This symbol, if defined, indicates that the timegm routine is |
| * available to do the opposite of gmtime () |
| */ |
| #$d_timegm HAS_TIMEGM /**/ |
| |
| /* U32_ALIGNMENT_REQUIRED: |
| * This symbol, if defined, indicates that you must access |
| * character data through U32-aligned pointers. |
| */ |
| #ifndef U32_ALIGNMENT_REQUIRED |
| #$d_u32align U32_ALIGNMENT_REQUIRED /**/ |
| #endif |
| |
| /* HAS_UALARM: |
| * This symbol, if defined, indicates that the ualarm routine is |
| * available to do alarms with microsecond granularity. |
| */ |
| #$d_ualarm HAS_UALARM /**/ |
| |
| /* HAS_UNORDERED: |
| * This symbol, if defined, indicates that the unordered routine is |
| * available to check whether two doubles are unordered |
| * (effectively: whether either of them is NaN) |
| */ |
| #$d_unordered HAS_UNORDERED /**/ |
| |
| /* HAS_UNSETENV: |
| * This symbol, if defined, indicates that the unsetenv () routine is |
| * available for use. |
| */ |
| #$d_unsetenv HAS_UNSETENV /**/ |
| |
| /* HAS_USLEEP_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the usleep() function. Otherwise, it is up |
| * to the program to supply one. A good guess is |
| * extern int usleep(useconds_t); |
| */ |
| #$d_usleepproto HAS_USLEEP_PROTO /**/ |
| |
| /* HAS_USTAT: |
| * This symbol, if defined, indicates that the ustat system call is |
| * available to query file system statistics by dev_t. |
| */ |
| #$d_ustat HAS_USTAT /**/ |
| |
| /* HAS_WRITEV: |
| * This symbol, if defined, indicates that the writev routine is |
| * available to do scatter writes. |
| */ |
| #$d_writev HAS_WRITEV /**/ |
| |
| /* USE_DYNAMIC_LOADING: |
| * This symbol, if defined, indicates that dynamic loading of |
| * some sort is available. |
| */ |
| #$usedl USE_DYNAMIC_LOADING /**/ |
| |
| /* FFLUSH_NULL: |
| * This symbol, if defined, tells that fflush(NULL) does flush |
| * all pending stdio output. |
| */ |
| /* FFLUSH_ALL: |
| * This symbol, if defined, tells that to flush |
| * all pending stdio output one must loop through all |
| * the stdio file handles stored in an array and fflush them. |
| * Note that if fflushNULL is defined, fflushall will not |
| * even be probed for and will be left undefined. |
| */ |
| #$fflushNULL FFLUSH_NULL /**/ |
| #$fflushall FFLUSH_ALL /**/ |
| |
| /* I_ASSERT: |
| * This symbol, if defined, indicates that <assert.h> exists and |
| * could be included by the C program to get the assert() macro. |
| */ |
| #$i_assert I_ASSERT /**/ |
| |
| /* I_CRYPT: |
| * This symbol, if defined, indicates that <crypt.h> exists and |
| * should be included. |
| */ |
| #$i_crypt I_CRYPT /**/ |
| |
| /* DB_Prefix_t: |
| * This symbol contains the type of the prefix structure element |
| * in the <db.h> header file. In older versions of DB, it was |
| * int, while in newer ones it is u_int32_t. |
| */ |
| /* DB_Hash_t: |
| * This symbol contains the type of the prefix structure element |
| * in the <db.h> header file. In older versions of DB, it was |
| * int, while in newer ones it is size_t. |
| */ |
| /* DB_VERSION_MAJOR_CFG: |
| * This symbol, if defined, defines the major version number of |
| * Berkeley DB found in the <db.h> header when Perl was configured. |
| */ |
| /* DB_VERSION_MINOR_CFG: |
| * This symbol, if defined, defines the minor version number of |
| * Berkeley DB found in the <db.h> header when Perl was configured. |
| * For DB version 1 this is always 0. |
| */ |
| /* DB_VERSION_PATCH_CFG: |
| * This symbol, if defined, defines the patch version number of |
| * Berkeley DB found in the <db.h> header when Perl was configured. |
| * For DB version 1 this is always 0. |
| */ |
| #define DB_Hash_t $db_hashtype /**/ |
| #define DB_Prefix_t $db_prefixtype /**/ |
| #define DB_VERSION_MAJOR_CFG $db_version_major /**/ |
| #define DB_VERSION_MINOR_CFG $db_version_minor /**/ |
| #define DB_VERSION_PATCH_CFG $db_version_patch /**/ |
| |
| /* I_FP: |
| * This symbol, if defined, indicates that <fp.h> exists and |
| * should be included. |
| */ |
| #$i_fp I_FP /**/ |
| |
| /* I_FP_CLASS: |
| * This symbol, if defined, indicates that <fp_class.h> exists and |
| * should be included. |
| */ |
| #$i_fp_class I_FP_CLASS /**/ |
| |
| /* I_IEEEFP: |
| * This symbol, if defined, indicates that <ieeefp.h> exists and |
| * should be included. |
| */ |
| #$i_ieeefp I_IEEEFP /**/ |
| |
| /* I_INTTYPES: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <inttypes.h>. |
| */ |
| #$i_inttypes I_INTTYPES /**/ |
| |
| /* I_LANGINFO: |
| * This symbol, if defined, indicates that <langinfo.h> exists and |
| * should be included. |
| */ |
| #$i_langinfo I_LANGINFO /**/ |
| |
| /* I_LIBUTIL: |
| * This symbol, if defined, indicates that <libutil.h> exists and |
| * should be included. |
| */ |
| #$i_libutil I_LIBUTIL /**/ |
| |
| /* I_MALLOCMALLOC: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <malloc/malloc.h>. |
| */ |
| #$i_mallocmalloc I_MALLOCMALLOC /**/ |
| |
| /* I_MNTENT: |
| * This symbol, if defined, indicates that <mntent.h> exists and |
| * should be included. |
| */ |
| #$i_mntent I_MNTENT /**/ |
| |
| /* I_NETINET_TCP: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <netinet/tcp.h>. |
| */ |
| #$i_netinettcp I_NETINET_TCP /**/ |
| |
| /* I_POLL: |
| * This symbol, if defined, indicates that <poll.h> exists and |
| * should be included. (see also HAS_POLL) |
| */ |
| #$i_poll I_POLL /**/ |
| |
| /* I_PROT: |
| * This symbol, if defined, indicates that <prot.h> exists and |
| * should be included. |
| */ |
| #$i_prot I_PROT /**/ |
| |
| /* I_SHADOW: |
| * This symbol, if defined, indicates that <shadow.h> exists and |
| * should be included. |
| */ |
| #$i_shadow I_SHADOW /**/ |
| |
| /* I_SOCKS: |
| * This symbol, if defined, indicates that <socks.h> exists and |
| * should be included. |
| */ |
| #$i_socks I_SOCKS /**/ |
| |
| /* I_STDBOOL: |
| * This symbol, if defined, indicates that <stdbool.h> exists and |
| * can be included. |
| */ |
| #$i_stdbool I_STDBOOL /**/ |
| |
| /* I_SUNMATH: |
| * This symbol, if defined, indicates that <sunmath.h> exists and |
| * should be included. |
| */ |
| #$i_sunmath I_SUNMATH /**/ |
| |
| /* I_SYSLOG: |
| * This symbol, if defined, indicates that <syslog.h> exists and |
| * should be included. |
| */ |
| #$i_syslog I_SYSLOG /**/ |
| |
| /* I_SYSMODE: |
| * This symbol, if defined, indicates that <sys/mode.h> exists and |
| * should be included. |
| */ |
| #$i_sysmode I_SYSMODE /**/ |
| |
| /* I_SYS_MOUNT: |
| * This symbol, if defined, indicates that <sys/mount.h> exists and |
| * should be included. |
| */ |
| #$i_sysmount I_SYS_MOUNT /**/ |
| |
| /* I_SYS_STATFS: |
| * This symbol, if defined, indicates that <sys/statfs.h> exists. |
| */ |
| #$i_sysstatfs I_SYS_STATFS /**/ |
| |
| /* I_SYS_STATVFS: |
| * This symbol, if defined, indicates that <sys/statvfs.h> exists and |
| * should be included. |
| */ |
| #$i_sysstatvfs I_SYS_STATVFS /**/ |
| |
| /* I_SYSUTSNAME: |
| * This symbol, if defined, indicates that <sys/utsname.h> exists and |
| * should be included. |
| */ |
| #$i_sysutsname I_SYSUTSNAME /**/ |
| |
| /* I_SYS_VFS: |
| * This symbol, if defined, indicates that <sys/vfs.h> exists and |
| * should be included. |
| */ |
| #$i_sysvfs I_SYS_VFS /**/ |
| |
| /* I_USTAT: |
| * This symbol, if defined, indicates that <ustat.h> exists and |
| * should be included. |
| */ |
| #$i_ustat I_USTAT /**/ |
| |
| /* PERL_PRIfldbl: |
| * This symbol, if defined, contains the string used by stdio to |
| * format long doubles (format 'f') for output. |
| */ |
| /* PERL_PRIgldbl: |
| * This symbol, if defined, contains the string used by stdio to |
| * format long doubles (format 'g') for output. |
| */ |
| /* PERL_PRIeldbl: |
| * This symbol, if defined, contains the string used by stdio to |
| * format long doubles (format 'e') for output. |
| */ |
| /* PERL_SCNfldbl: |
| * This symbol, if defined, contains the string used by stdio to |
| * format long doubles (format 'f') for input. |
| */ |
| #$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/ |
| #$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/ |
| #$d_PRIeldbl PERL_PRIeldbl $sPRIeldbl /**/ |
| #$d_SCNfldbl PERL_SCNfldbl $sSCNfldbl /**/ |
| |
| /* PERL_MAD: |
| * This symbol, if defined, indicates that the Misc Attribution |
| * Declaration code should be conditionally compiled. |
| */ |
| #$mad PERL_MAD /**/ |
| |
| /* NEED_VA_COPY: |
| * This symbol, if defined, indicates that the system stores |
| * the variable argument list datatype, va_list, in a format |
| * that cannot be copied by simple assignment, so that some |
| * other means must be used when copying is required. |
| * As such systems vary in their provision (or non-provision) |
| * of copying mechanisms, handy.h defines a platform- |
| * independent macro, Perl_va_copy(src, dst), to do the job. |
| */ |
| #$need_va_copy NEED_VA_COPY /**/ |
| |
| /* IVTYPE: |
| * This symbol defines the C type used for Perl's IV. |
| */ |
| /* UVTYPE: |
| * This symbol defines the C type used for Perl's UV. |
| */ |
| /* I8TYPE: |
| * This symbol defines the C type used for Perl's I8. |
| */ |
| /* U8TYPE: |
| * This symbol defines the C type used for Perl's U8. |
| */ |
| /* I16TYPE: |
| * This symbol defines the C type used for Perl's I16. |
| */ |
| /* U16TYPE: |
| * This symbol defines the C type used for Perl's U16. |
| */ |
| /* I32TYPE: |
| * This symbol defines the C type used for Perl's I32. |
| */ |
| /* U32TYPE: |
| * This symbol defines the C type used for Perl's U32. |
| */ |
| /* I64TYPE: |
| * This symbol defines the C type used for Perl's I64. |
| */ |
| /* U64TYPE: |
| * This symbol defines the C type used for Perl's U64. |
| */ |
| /* NVTYPE: |
| * This symbol defines the C type used for Perl's NV. |
| */ |
| /* IVSIZE: |
| * This symbol contains the sizeof(IV). |
| */ |
| /* UVSIZE: |
| * This symbol contains the sizeof(UV). |
| */ |
| /* I8SIZE: |
| * This symbol contains the sizeof(I8). |
| */ |
| /* U8SIZE: |
| * This symbol contains the sizeof(U8). |
| */ |
| /* I16SIZE: |
| * This symbol contains the sizeof(I16). |
| */ |
| /* U16SIZE: |
| * This symbol contains the sizeof(U16). |
| */ |
| /* I32SIZE: |
| * This symbol contains the sizeof(I32). |
| */ |
| /* U32SIZE: |
| * This symbol contains the sizeof(U32). |
| */ |
| /* I64SIZE: |
| * This symbol contains the sizeof(I64). |
| */ |
| /* U64SIZE: |
| * This symbol contains the sizeof(U64). |
| */ |
| /* NVSIZE: |
| * This symbol contains the sizeof(NV). |
| */ |
| /* NV_PRESERVES_UV: |
| * This symbol, if defined, indicates that a variable of type NVTYPE |
| * can preserve all the bits of a variable of type UVTYPE. |
| */ |
| /* NV_PRESERVES_UV_BITS: |
| * This symbol contains the number of bits a variable of type NVTYPE |
| * can preserve of a variable of type UVTYPE. |
| */ |
| /* NV_OVERFLOWS_INTEGERS_AT: |
| * This symbol gives the largest integer value that NVs can hold. This |
| * value + 1.0 cannot be stored accurately. It is expressed as constant |
| * floating point expression to reduce the chance of decimal/binary |
| * conversion issues. If it can not be determined, the value 0 is given. |
| */ |
| /* NV_ZERO_IS_ALLBITS_ZERO: |
| * This symbol, if defined, indicates that a variable of type NVTYPE |
| * stores 0.0 in memory as all bits zero. |
| */ |
| #define IVTYPE $ivtype /**/ |
| #define UVTYPE $uvtype /**/ |
| #define I8TYPE $i8type /**/ |
| #define U8TYPE $u8type /**/ |
| #define I16TYPE $i16type /**/ |
| #define U16TYPE $u16type /**/ |
| #define I32TYPE $i32type /**/ |
| #define U32TYPE $u32type /**/ |
| #ifdef HAS_QUAD |
| #define I64TYPE $i64type /**/ |
| #define U64TYPE $u64type /**/ |
| #endif |
| #define NVTYPE $nvtype /**/ |
| #define IVSIZE $ivsize /**/ |
| #define UVSIZE $uvsize /**/ |
| #define I8SIZE $i8size /**/ |
| #define U8SIZE $u8size /**/ |
| #define I16SIZE $i16size /**/ |
| #define U16SIZE $u16size /**/ |
| #define I32SIZE $i32size /**/ |
| #define U32SIZE $u32size /**/ |
| #ifdef HAS_QUAD |
| #define I64SIZE $i64size /**/ |
| #define U64SIZE $u64size /**/ |
| #endif |
| #define NVSIZE $nvsize /**/ |
| #$d_nv_preserves_uv NV_PRESERVES_UV |
| #define NV_PRESERVES_UV_BITS $nv_preserves_uv_bits |
| #define NV_OVERFLOWS_INTEGERS_AT $nv_overflows_integers_at |
| #$d_nv_zero_is_allbits_zero NV_ZERO_IS_ALLBITS_ZERO |
| #if UVSIZE == 8 |
| # ifdef BYTEORDER |
| # if BYTEORDER == 0x1234 |
| # undef BYTEORDER |
| # define BYTEORDER 0x12345678 |
| # else |
| # if BYTEORDER == 0x4321 |
| # undef BYTEORDER |
| # define BYTEORDER 0x87654321 |
| # endif |
| # endif |
| # endif |
| #endif |
| |
| /* IVdf: |
| * This symbol defines the format string used for printing a Perl IV |
| * as a signed decimal integer. |
| */ |
| /* UVuf: |
| * This symbol defines the format string used for printing a Perl UV |
| * as an unsigned decimal integer. |
| */ |
| /* UVof: |
| * This symbol defines the format string used for printing a Perl UV |
| * as an unsigned octal integer. |
| */ |
| /* UVxf: |
| * This symbol defines the format string used for printing a Perl UV |
| * as an unsigned hexadecimal integer in lowercase abcdef. |
| */ |
| /* UVXf: |
| * This symbol defines the format string used for printing a Perl UV |
| * as an unsigned hexadecimal integer in uppercase ABCDEF. |
| */ |
| /* NVef: |
| * This symbol defines the format string used for printing a Perl NV |
| * using %e-ish floating point format. |
| */ |
| /* NVff: |
| * This symbol defines the format string used for printing a Perl NV |
| * using %f-ish floating point format. |
| */ |
| /* NVgf: |
| * This symbol defines the format string used for printing a Perl NV |
| * using %g-ish floating point format. |
| */ |
| #define IVdf $ivdformat /**/ |
| #define UVuf $uvuformat /**/ |
| #define UVof $uvoformat /**/ |
| #define UVxf $uvxformat /**/ |
| #define UVXf $uvXUformat /**/ |
| #define NVef $nveformat /**/ |
| #define NVff $nvfformat /**/ |
| #define NVgf $nvgformat /**/ |
| |
| /* SELECT_MIN_BITS: |
| * This symbol holds the minimum number of bits operated by select. |
| * That is, if you do select(n, ...), how many bits at least will be |
| * cleared in the masks if some activity is detected. Usually this |
| * is either n or 32*ceil(n/32), especially many little-endians do |
| * the latter. This is only useful if you have select(), naturally. |
| */ |
| #define SELECT_MIN_BITS $selectminbits /**/ |
| |
| /* ST_INO_SIZE: |
| * This variable contains the size of struct stat's st_ino in bytes. |
| */ |
| /* ST_INO_SIGN: |
| * This symbol holds the signedess of struct stat's st_ino. |
| * 1 for unsigned, -1 for signed. |
| */ |
| #define ST_INO_SIGN $st_ino_sign /* st_ino sign */ |
| #define ST_INO_SIZE $st_ino_size /* st_ino size */ |
| |
| /* STARTPERL: |
| * This variable contains the string to put in front of a perl |
| * script to make sure (one hopes) that it runs with perl and not |
| * some shell. |
| */ |
| #define STARTPERL "$startperl" /**/ |
| |
| /* HAS_STDIO_STREAM_ARRAY: |
| * This symbol, if defined, tells that there is an array |
| * holding the stdio streams. |
| */ |
| /* STDIO_STREAM_ARRAY: |
| * This symbol tells the name of the array holding the stdio streams. |
| * Usual values include _iob, __iob, and __sF. |
| */ |
| #$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/ |
| #ifdef HAS_STDIO_STREAM_ARRAY |
| #define STDIO_STREAM_ARRAY $stdio_stream_array |
| #endif |
| |
| /* GMTIME_MAX: |
| * This symbol contains the maximum value for the time_t offset that |
| * the system function gmtime () accepts, and defaults to 0 |
| */ |
| /* GMTIME_MIN: |
| * This symbol contains the minimum value for the time_t offset that |
| * the system function gmtime () accepts, and defaults to 0 |
| */ |
| /* LOCALTIME_MAX: |
| * This symbol contains the maximum value for the time_t offset that |
| * the system function localtime () accepts, and defaults to 0 |
| */ |
| /* LOCALTIME_MIN: |
| * This symbol contains the minimum value for the time_t offset that |
| * the system function localtime () accepts, and defaults to 0 |
| */ |
| #define GMTIME_MAX $sGMTIME_max /**/ |
| #define GMTIME_MIN $sGMTIME_min /**/ |
| #define LOCALTIME_MAX $sLOCALTIME_max /**/ |
| #define LOCALTIME_MIN $sLOCALTIME_min /**/ |
| |
| /* USE_64_BIT_INT: |
| * This symbol, if defined, indicates that 64-bit integers should |
| * be used when available. If not defined, the native integers |
| * will be employed (be they 32 or 64 bits). The minimal possible |
| * 64-bitness is used, just enough to get 64-bit integers into Perl. |
| * This may mean using for example "long longs", while your memory |
| * may still be limited to 2 gigabytes. |
| */ |
| /* USE_64_BIT_ALL: |
| * This symbol, if defined, indicates that 64-bit integers should |
| * be used when available. If not defined, the native integers |
| * will be used (be they 32 or 64 bits). The maximal possible |
| * 64-bitness is employed: LP64 or ILP64, meaning that you will |
| * be able to use more than 2 gigabytes of memory. This mode is |
| * even more binary incompatible than USE_64_BIT_INT. You may not |
| * be able to run the resulting executable in a 32-bit CPU at all or |
| * you may need at least to reboot your OS to 64-bit mode. |
| */ |
| #ifndef USE_64_BIT_INT |
| #$use64bitint USE_64_BIT_INT /**/ |
| #endif |
| #ifndef USE_64_BIT_ALL |
| #$use64bitall USE_64_BIT_ALL /**/ |
| #endif |
| |
| /* USE_DTRACE: |
| * This symbol, if defined, indicates that Perl should |
| * be built with support for DTrace. |
| */ |
| #$usedtrace USE_DTRACE /**/ |
| |
| /* USE_FAST_STDIO: |
| * This symbol, if defined, indicates that Perl should |
| * be built to use 'fast stdio'. |
| * Defaults to define in Perls 5.8 and earlier, to undef later. |
| */ |
| #ifndef USE_FAST_STDIO |
| #$usefaststdio USE_FAST_STDIO /**/ |
| #endif |
| |
| /* USE_KERN_PROC_PATHNAME: |
| * This symbol, if defined, indicates that we can use sysctl with |
| * KERN_PROC_PATHNAME to get a full path for the executable, and hence |
| * convert $^X to an absolute path. |
| */ |
| #$usekernprocpathname USE_KERN_PROC_PATHNAME /**/ |
| |
| /* USE_LARGE_FILES: |
| * This symbol, if defined, indicates that large file support |
| * should be used when available. |
| */ |
| #ifndef USE_LARGE_FILES |
| #$uselargefiles USE_LARGE_FILES /**/ |
| #endif |
| |
| /* USE_LONG_DOUBLE: |
| * This symbol, if defined, indicates that long doubles should |
| * be used when available. |
| */ |
| #ifndef USE_LONG_DOUBLE |
| #$uselongdouble USE_LONG_DOUBLE /**/ |
| #endif |
| |
| /* USE_MORE_BITS: |
| * This symbol, if defined, indicates that 64-bit interfaces and |
| * long doubles should be used when available. |
| */ |
| #ifndef USE_MORE_BITS |
| #$usemorebits USE_MORE_BITS /**/ |
| #endif |
| |
| /* MULTIPLICITY: |
| * This symbol, if defined, indicates that Perl should |
| * be built to use multiplicity. |
| */ |
| #ifndef MULTIPLICITY |
| #$usemultiplicity MULTIPLICITY /**/ |
| #endif |
| |
| /* USE_NSGETEXECUTABLEPATH: |
| * This symbol, if defined, indicates that we can use _NSGetExecutablePath |
| * and realpath to get a full path for the executable, and hence convert |
| * $^X to an absolute path. |
| */ |
| #$usensgetexecutablepath USE_NSGETEXECUTABLEPATH /**/ |
| |
| /* USE_PERLIO: |
| * This symbol, if defined, indicates that the PerlIO abstraction should |
| * be used throughout. If not defined, stdio should be |
| * used in a fully backward compatible manner. |
| */ |
| #ifndef USE_PERLIO |
| #$useperlio USE_PERLIO /**/ |
| #endif |
| |
| /* USE_SOCKS: |
| * This symbol, if defined, indicates that Perl should |
| * be built to use socks. |
| */ |
| #ifndef USE_SOCKS |
| #$usesocks USE_SOCKS /**/ |
| #endif |
| |
| #endif |
| !GROK!THIS! |
| ;; |
| esac |