| # |
| # Makefile to build perl on Windows using Microsoft NMAKE. |
| # Supported compilers: |
| # Microsoft Visual C++ 6.0 or later |
| # Windows SDK 64-bit compiler and tools |
| # |
| # This is set up to build a perl.exe that runs off a shared library |
| # (perl516.dll). Also makes individual DLLs for the XS extensions. |
| # |
| |
| ## |
| ## Make sure you read README.win32 *before* you mess with anything here! |
| ## |
| |
| ## |
| ## Build configuration. Edit the values below to suit your needs. |
| ## |
| |
| # |
| # Set these to wherever you want "nmake install" to put your |
| # newly built perl. |
| # |
| INST_DRV = c: |
| INST_TOP = $(INST_DRV)\perl |
| |
| # |
| # Uncomment if you want to build a 32-bit Perl using a 32-bit compiler |
| # on a 64-bit version of Windows. |
| #WIN64 = undef |
| |
| # |
| # Comment this out if you DON'T want your perl installation to be versioned. |
| # This means that the new installation will overwrite any files from the |
| # old installation at the same INST_TOP location. Leaving it enabled is |
| # the safest route, as perl adds the extra version directory to all the |
| # locations it installs files to. If you disable it, an alternative |
| # versioned installation can be obtained by setting INST_TOP above to a |
| # path that includes an arbitrary version string. |
| # |
| #INST_VER = \5.16.2 |
| |
| # |
| # Comment this out if you DON'T want your perl installation to have |
| # architecture specific components. This means that architecture- |
| # specific files will be installed along with the architecture-neutral |
| # files. Leaving it enabled is safer and more flexible, in case you |
| # want to build multiple flavors of perl and install them together in |
| # the same location. Commenting it out gives you a simpler |
| # installation that is easier to understand for beginners. |
| # |
| #INST_ARCH = \$(ARCHNAME) |
| |
| # |
| # Uncomment this if you want perl to run |
| # $Config{sitelibexp}\sitecustomize.pl |
| # before anything else. This script can then be set up, for example, |
| # to add additional entries to @INC. |
| # |
| #USE_SITECUST = define |
| |
| # |
| # uncomment to enable multiple interpreters. This is need for fork() |
| # emulation and for thread support. |
| # |
| USE_MULTI = define |
| |
| # |
| # Beginnings of interpreter cloning/threads; now reasonably complete. |
| # This should be enabled to get the fork() emulation. This needs |
| # USE_MULTI as well. |
| # |
| USE_ITHREADS = define |
| |
| # |
| # uncomment to enable the implicit "host" layer for all system calls |
| # made by perl. This needs USE_MULTI above. This is also needed to |
| # get fork(). |
| # |
| USE_IMP_SYS = define |
| |
| # |
| # Comment out next assign to disable perl's I/O subsystem and use compiler's |
| # stdio for IO - depending on your compiler vendor and run time library you may |
| # then get a number of fails from make test i.e. bugs - complain to them not us ;-). |
| # You will also be unable to take full advantage of perl5.8's support for multiple |
| # encodings and may see lower IO performance. You have been warned. |
| USE_PERLIO = define |
| |
| # |
| # Comment this out if you don't want to enable large file support for |
| # some reason. Should normally only be changed to maintain compatibility |
| # with an older release of perl. |
| USE_LARGE_FILES = define |
| |
| # |
| # uncomment exactly one of the following |
| # |
| # Visual C++ 6.x (aka Visual C++ 98) |
| CCTYPE = MSVC60 |
| # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools) |
| #CCTYPE = MSVC70FREE |
| # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version) |
| #CCTYPE = MSVC70 |
| # Windows Server 2003 SP1 Platform SDK (April 2005) |
| #CCTYPE = SDK2003SP1 |
| # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version) |
| #CCTYPE = MSVC80FREE |
| # Visual C++ 2005 (aka Visual C++ 8.x) (full version) |
| #CCTYPE = MSVC80 |
| # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version) |
| #CCTYPE = MSVC90FREE |
| # Visual C++ 2008 (aka Visual C++ 9.x) (full version) |
| #CCTYPE = MSVC90 |
| # Visual C++ 2010 Express Edition (aka Visual C++ 10.x) (free version) |
| #CCTYPE = MSVC100FREE |
| # Visual C++ 2010 (aka Visual C++ 10.x) (full version) |
| #CCTYPE = MSVC100 |
| |
| # |
| # uncomment next line if you want debug version of perl (big,slow) |
| # If not enabled, we automatically try to use maximum optimization |
| # with all compilers that are known to have a working optimizer. |
| # |
| #CFG = Debug |
| |
| # |
| # uncomment to enable linking with setargv.obj under the Visual C |
| # compiler. Setting this options enables perl to expand wildcards in |
| # arguments, but it may be harder to use alternate methods like |
| # File::DosGlob that are more powerful. This option is supported only with |
| # Visual C. |
| # |
| #USE_SETARGV = define |
| |
| # |
| # set this if you wish to use perl's malloc |
| # WARNING: Turning this on/off WILL break binary compatibility with extensions |
| # you may have compiled with/without it. Be prepared to recompile all |
| # extensions if you change the default. Currently, this cannot be enabled |
| # if you ask for USE_IMP_SYS above. |
| # |
| #PERL_MALLOC = define |
| |
| # |
| # set this to enable debugging mstats |
| # This must be enabled to use the Devel::Peek::mstat() function. This cannot |
| # be enabled without PERL_MALLOC as well. |
| # |
| #DEBUG_MSTATS = define |
| |
| # |
| # set this to additionally provide a statically linked perl-static.exe. |
| # Note that dynamic loading will not work with this perl, so you must |
| # include required modules statically using the STATIC_EXT or ALL_STATIC |
| # variables below. A static library perl516s.lib will also be created. |
| # Ordinary perl.exe is not affected by this option. |
| # |
| #BUILD_STATIC = define |
| |
| # |
| # in addition to BUILD_STATIC the option ALL_STATIC makes *every* |
| # extension get statically built |
| # This will result in a very large perl executable, but the main purpose |
| # is to have proper linking set so as to be able to create miscellaneous |
| # executables with different built-in extensions |
| # |
| #ALL_STATIC = define |
| |
| # |
| # |
| # set the install locations of the compiler include/libraries |
| # Running VCVARS32.BAT is *required* when using Visual C. |
| # Some versions of Visual C don't define MSVCDIR in the environment, |
| # so you may have to set CCHOME explicitly (spaces in the path name should |
| # not be quoted) |
| # |
| CCHOME = $(MSVCDIR) |
| CCINCDIR = $(CCHOME)\include |
| CCLIBDIR = $(CCHOME)\lib |
| |
| # |
| # Additional compiler flags can be specified here. |
| # |
| BUILDOPT = $(BUILDOPTEXTRA) |
| |
| # |
| # This should normally be disabled. Enabling it will disable the File::Glob |
| # implementation of CORE::glob. |
| # |
| #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB |
| |
| # |
| # Perl needs to read scripts in text mode so that the DATA filehandle |
| # works correctly with seek() and tell(), or around auto-flushes of |
| # all filehandles (e.g. by system(), backticks, fork(), etc). |
| # |
| # The current version on the ByteLoader module on CPAN however only |
| # works if scripts are read in binary mode. But before you disable text |
| # mode script reading (and break some DATA filehandle functionality) |
| # please check first if an updated ByteLoader isn't available on CPAN. |
| # |
| BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS |
| |
| # |
| # specify semicolon-separated list of extra directories that modules will |
| # look for libraries (spaces in path names need not be quoted) |
| # |
| EXTRALIBDIRS = |
| |
| # |
| # set this to your email address (perl will guess a value from |
| # from your loginname and your hostname, which may not be right) |
| # |
| #EMAIL = |
| |
| ## |
| ## Build configuration ends. |
| ## |
| |
| ##################### CHANGE THESE ONLY IF YOU MUST ##################### |
| |
| !IF "$(USE_IMP_SYS)" == "define" |
| PERL_MALLOC = undef |
| DEBUG_MSTATS = undef |
| !ENDIF |
| |
| !IF "$(PERL_MALLOC)" == "" |
| PERL_MALLOC = undef |
| DEBUG_MSTATS = undef |
| !ENDIF |
| |
| !IF "$(DEBUG_MSTATS)" == "" |
| DEBUG_MSTATS = undef |
| !ENDIF |
| |
| !IF "$(DEBUG_MSTATS)" == "define" |
| BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS |
| !ENDIF |
| |
| !IF "$(USE_SITECUST)" == "" |
| USE_SITECUST = undef |
| !ENDIF |
| |
| !IF "$(USE_MULTI)" == "" |
| USE_MULTI = undef |
| !ENDIF |
| |
| !IF "$(USE_ITHREADS)" == "" |
| USE_ITHREADS = undef |
| !ENDIF |
| |
| !IF "$(USE_IMP_SYS)" == "" |
| USE_IMP_SYS = undef |
| !ENDIF |
| |
| !IF "$(USE_PERLIO)" == "" |
| USE_PERLIO = undef |
| !ENDIF |
| |
| !IF "$(USE_LARGE_FILES)" == "" |
| USE_LARGE_FILES = undef |
| !ENDIF |
| |
| !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef" |
| USE_MULTI = define |
| !ENDIF |
| |
| !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef" |
| USE_MULTI = define |
| !ENDIF |
| |
| !IF "$(USE_SITECUST)" == "define" |
| BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE |
| !ENDIF |
| |
| !IF "$(USE_MULTI)" != "undef" |
| BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT |
| !ENDIF |
| |
| !IF "$(USE_IMP_SYS)" != "undef" |
| BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS |
| !ENDIF |
| |
| !IF "$(PROCESSOR_ARCHITECTURE)" == "" |
| PROCESSOR_ARCHITECTURE = x86 |
| !ENDIF |
| |
| !IF "$(WIN64)" == "" |
| # When we are running from a 32bit cmd.exe on AMD64 then |
| # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432 |
| # is set to AMD64 |
| !IF "$(PROCESSOR_ARCHITEW6432)" != "" |
| PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432) |
| WIN64 = define |
| !ELSE |
| !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64" |
| WIN64 = define |
| !ELSE |
| WIN64 = undef |
| !ENDIF |
| !ENDIF |
| !ENDIF |
| |
| # Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because |
| # both link against MSVCRT.dll (which is part of Windows itself) and |
| # not against a compiler specific versioned runtime. |
| !IF "$(WIN64)" == "define" && "$(CCTYPE)" == "MSVC60" |
| CCTYPE = SDK2003SP1 |
| !ENDIF |
| |
| ARCHITECTURE = $(PROCESSOR_ARCHITECTURE) |
| !IF "$(ARCHITECTURE)" == "AMD64" |
| ARCHITECTURE = x64 |
| !ENDIF |
| !IF "$(ARCHITECTURE)" == "IA64" |
| ARCHITECTURE = ia64 |
| !ENDIF |
| |
| !IF "$(USE_MULTI)" == "define" |
| ARCHNAME = MSWin32-$(ARCHITECTURE)-multi |
| !ELSE |
| !IF "$(USE_PERLIO)" == "define" |
| ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio |
| !ELSE |
| ARCHNAME = MSWin32-$(ARCHITECTURE) |
| !ENDIF |
| !ENDIF |
| |
| !IF "$(USE_PERLIO)" == "define" |
| BUILDOPT = $(BUILDOPT) -DUSE_PERLIO |
| !ENDIF |
| |
| !IF "$(USE_ITHREADS)" == "define" |
| ARCHNAME = $(ARCHNAME)-thread |
| !ENDIF |
| |
| # Visual C++ 98, .NET 2003, 2005/2008/2010 specific. |
| # VC++ 6/7/8/9/10.x can load DLLs on demand. Makes the test suite run |
| # in about 10% less time. (The free version of 7.x can't do this, but the free |
| # versions of 8/9/10.x can.) |
| !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \ |
| "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \ |
| "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \ |
| "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE" |
| DELAYLOAD = -DELAYLOAD:ws2_32.dll delayimp.lib |
| !ENDIF |
| |
| # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and |
| # DLLs. These either need copying everywhere with the binaries, or else need |
| # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For |
| # simplicity, embed them if they exist (and delete them afterwards so that they |
| # don't get installed too). |
| EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \ |
| if exist $@.manifest del $@.manifest |
| EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \ |
| if exist $@.manifest del $@.manifest |
| |
| ARCHDIR = ..\lib\$(ARCHNAME) |
| COREDIR = ..\lib\CORE |
| AUTODIR = ..\lib\auto |
| LIBDIR = ..\lib |
| EXTDIR = ..\ext |
| DISTDIR = ..\dist |
| CPANDIR = ..\cpan |
| PODDIR = ..\pod |
| EXTUTILSDIR = $(LIBDIR)\ExtUtils |
| HTMLDIR = .\html |
| |
| # |
| INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin |
| INST_BIN = $(INST_SCRIPT)$(INST_ARCH) |
| INST_LIB = $(INST_TOP)$(INST_VER)\lib |
| INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) |
| INST_COREDIR = $(INST_ARCHLIB)\CORE |
| INST_HTML = $(INST_TOP)$(INST_VER)\html |
| |
| # |
| # Programs to compile, build .lib files and link |
| # |
| |
| CC = cl |
| LINK32 = link |
| LIB32 = $(LINK32) -lib |
| RSC = rc |
| |
| # |
| # Options |
| # |
| |
| INCLUDES = -I$(COREDIR) -I.\include -I. -I.. |
| #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX |
| DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT |
| LOCDEFS = -DPERLDLL -DPERL_CORE |
| SUBSYS = console |
| CXX_FLAG = -TP -EHsc |
| |
| LIBC = msvcrt.lib |
| |
| !IF "$(CFG)" == "Debug" |
| OPTIMIZE = -Od -MD -Zi -DDEBUGGING |
| LINK_DBG = -debug |
| !ELSE |
| OPTIMIZE = -MD -Zi -DNDEBUG |
| # we enable debug symbols in release builds also |
| LINK_DBG = -debug -opt:ref,icf |
| # you may want to enable this if you want COFF symbols in the executables |
| # in addition to the PDB symbols. The default Dr. Watson that ships with |
| # Windows can use the the former but not latter. The free WinDbg can be |
| # installed to get better stack traces from just the PDB symbols, so we |
| # avoid the bloat of COFF symbols by default. |
| #LINK_DBG = $(LINK_DBG) -debugtype:both |
| ! IF "$(WIN64)" == "define" |
| # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG) |
| OPTIMIZE = $(OPTIMIZE) -Ox -GL |
| LINK_DBG = $(LINK_DBG) -ltcg |
| ! ELSE |
| # -O1 yields smaller code, which turns out to be faster than -O2 on x86 |
| OPTIMIZE = $(OPTIMIZE) -O1 |
| #OPTIMIZE = $(OPTIMIZE) -O2 |
| ! ENDIF |
| !ENDIF |
| |
| !IF "$(WIN64)" == "define" |
| DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE |
| OPTIMIZE = $(OPTIMIZE) -fp:precise |
| !ENDIF |
| |
| # For now, silence VC++ 8/9/10.x's warnings about "unsafe" CRT functions |
| # and POSIX CRT function names being deprecated. |
| !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \ |
| "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \ |
| "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE" |
| DEFINES = $(DEFINES) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE |
| !ENDIF |
| |
| # In VS 2005 (VC++ 8.0) Microsoft changes time_t from 32-bit to |
| # 64-bit, even in 32-bit mode. It also provides the _USE_32BIT_TIME_T |
| # preprocessor option to revert back to the old functionality for |
| # backward compatibility. We define this symbol here for older 32-bit |
| # compilers only (which aren't using it at all) for the sole purpose |
| # of getting it into $Config{ccflags}. That way if someone builds |
| # Perl itself with e.g. VC6 but later installs an XS module using VC8 |
| # the time_t types will still be compatible. |
| !IF "$(WIN64)" == "undef" |
| ! IF "$(CCTYPE)" == "MSVC60" || \ |
| "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC70FREE" |
| BUILDOPT = $(BUILDOPT) -D_USE_32BIT_TIME_T |
| ! ENDIF |
| !ENDIF |
| |
| LIBBASEFILES = \ |
| oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ |
| comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ |
| netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \ |
| version.lib odbc32.lib odbccp32.lib comctl32.lib |
| |
| # The 64 bit Windows Server 2003 SP1 SDK compilers link against MSVCRT.dll, which |
| # doesn't include the buffer overrun verification code used by the /GS switch. |
| # Since the code links against libraries that are compiled with /GS, this |
| # "security cookie verification" code must be included via bufferoverflow.lib. |
| !IF "$(WIN64)" == "define" && "$(CCTYPE)" == "SDK2003SP1" |
| LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib |
| !ENDIF |
| |
| LIBFILES = $(LIBBASEFILES) $(LIBC) |
| |
| #EXTRACFLAGS = -nologo -GF -W4 -wd4127 -wd4706 |
| EXTRACFLAGS = -nologo -GF -W3 |
| CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \ |
| $(PCHFLAGS) $(OPTIMIZE) |
| LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ |
| -libpath:"$(INST_COREDIR)" \ |
| -machine:$(PROCESSOR_ARCHITECTURE) |
| LIB_FLAGS = -nologo |
| OBJOUT_FLAG = -Fo |
| EXEOUT_FLAG = -Fe |
| |
| CFLAGS_O = $(CFLAGS) $(BUILDOPT) |
| |
| !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \ |
| "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \ |
| "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE" |
| LINK_FLAGS = $(LINK_FLAGS) "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'" |
| !ELSE |
| RSC_FLAGS = -DINCLUDE_MANIFEST |
| !ENDIF |
| |
| |
| #################### do not edit below this line ####################### |
| ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## |
| |
| o = .obj |
| |
| # |
| # Rules |
| # |
| |
| .SUFFIXES : .c $(o) .dll .lib .exe .rc .res |
| |
| .c$(o): |
| $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $< |
| |
| .y.c: |
| $(NOOP) |
| |
| $(o).dll: |
| $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \ |
| -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL) |
| $(EMBED_DLL_MANI) |
| |
| .rc.res: |
| $(RSC) -i.. $(RSC_FLAGS) $< |
| |
| # |
| # various targets |
| |
| # makedef.pl must be updated if this changes, and this should normally |
| # only change when there is an incompatible revision of the public API. |
| PERLIMPLIB = ..\perl516.lib |
| PERLSTATICLIB = ..\perl516s.lib |
| PERLDLL = ..\perl516.dll |
| |
| MINIPERL = ..\miniperl.exe |
| MINIDIR = .\mini |
| PERLEXE = ..\perl.exe |
| WPERLEXE = ..\wperl.exe |
| PERLEXESTATIC = ..\perl-static.exe |
| GLOBEXE = ..\perlglob.exe |
| CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl |
| MINIMOD = ..\lib\ExtUtils\Miniperl.pm |
| X2P = ..\x2p\a2p.exe |
| GENUUDMAP = ..\generate_uudmap.exe |
| !IF "$(BUILD_STATIC)" == "define" |
| PERLSTATIC = static |
| !ELSE |
| PERLSTATIC = |
| !ENDIF |
| |
| # Unicode data files generated by mktables |
| FIRSTUNIFILE = ..\lib\unicore\Decomposition.pl |
| UNIDATAFILES = ..\lib\unicore\Decomposition.pl \ |
| ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \ |
| ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst \ |
| ..\lib\unicore\UCD.pl ..\lib\unicore\Name.pm \ |
| ..\lib\unicore\TestProp.pl |
| |
| # Directories of Unicode data files generated by mktables |
| UNIDATADIR1 = ..\lib\unicore\To |
| UNIDATADIR2 = ..\lib\unicore\lib |
| |
| PERLEXE_MANIFEST= .\perlexe.manifest |
| PERLEXE_ICO = .\perlexe.ico |
| PERLEXE_RES = .\perlexe.res |
| PERLDLL_RES = |
| |
| # Nominate a target which causes extensions to be re-built |
| # This used to be $(PERLEXE), but at worst it is the .dll that they depend |
| # on and really only the interface - i.e. the .def file used to export symbols |
| # from the .dll |
| PERLDEP = perldll.def |
| |
| PL2BAT = bin\pl2bat.pl |
| GLOBBAT = bin\perlglob.bat |
| |
| UTILS = \ |
| ..\utils\h2ph \ |
| ..\utils\splain \ |
| ..\utils\perlbug \ |
| ..\utils\pl2pm \ |
| ..\utils\c2ph \ |
| ..\utils\pstruct \ |
| ..\utils\h2xs \ |
| ..\utils\perldoc \ |
| ..\utils\perlivp \ |
| ..\utils\libnetcfg \ |
| ..\utils\enc2xs \ |
| ..\utils\piconv \ |
| ..\utils\config_data \ |
| ..\utils\corelist \ |
| ..\utils\cpan \ |
| ..\utils\xsubpp \ |
| ..\utils\prove \ |
| ..\utils\ptar \ |
| ..\utils\ptardiff \ |
| ..\utils\ptargrep \ |
| ..\utils\zipdetails \ |
| ..\utils\cpanp-run-perl \ |
| ..\utils\cpanp \ |
| ..\utils\cpan2dist \ |
| ..\utils\shasum \ |
| ..\utils\instmodsh \ |
| ..\utils\json_pp \ |
| ..\utils\pod2html \ |
| ..\x2p\find2perl \ |
| ..\x2p\psed \ |
| ..\x2p\s2p \ |
| bin\exetype.pl \ |
| bin\runperl.pl \ |
| bin\pl2bat.pl \ |
| bin\perlglob.pl \ |
| bin\search.pl |
| |
| MAKE = nmake -nologo |
| MAKE_BARE = nmake |
| |
| !IF "$(WIN64)" == "define" |
| CFGSH_TMPL = config.vc64 |
| CFGH_TMPL = config_H.vc64 |
| !ELSE |
| CFGSH_TMPL = config.vc |
| CFGH_TMPL = config_H.vc |
| !ENDIF |
| |
| XCOPY = xcopy /f /r /i /d /y |
| RCOPY = xcopy /f /r /i /e /d /y |
| NOOP = @rem |
| NULL = |
| |
| DEL = del |
| |
| MICROCORE_SRC = \ |
| ..\av.c \ |
| ..\deb.c \ |
| ..\doio.c \ |
| ..\doop.c \ |
| ..\dump.c \ |
| ..\globals.c \ |
| ..\gv.c \ |
| ..\mro.c \ |
| ..\hv.c \ |
| ..\locale.c \ |
| ..\keywords.c \ |
| ..\mathoms.c \ |
| ..\mg.c \ |
| ..\numeric.c \ |
| ..\op.c \ |
| ..\pad.c \ |
| ..\perl.c \ |
| ..\perlapi.c \ |
| ..\perly.c \ |
| ..\pp.c \ |
| ..\pp_ctl.c \ |
| ..\pp_hot.c \ |
| ..\pp_pack.c \ |
| ..\pp_sort.c \ |
| ..\pp_sys.c \ |
| ..\reentr.c \ |
| ..\regcomp.c \ |
| ..\regexec.c \ |
| ..\run.c \ |
| ..\scope.c \ |
| ..\sv.c \ |
| ..\taint.c \ |
| ..\toke.c \ |
| ..\universal.c \ |
| ..\utf8.c \ |
| ..\util.c |
| |
| EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c |
| |
| !IF "$(PERL_MALLOC)" == "define" |
| EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c |
| !ENDIF |
| |
| EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c |
| |
| WIN32_SRC = \ |
| .\win32.c \ |
| .\win32sck.c \ |
| .\win32thread.c \ |
| .\fcrypt.c |
| |
| # We need this for miniperl build unless we override canned |
| # config.h #define building mini\* |
| #!IF "$(USE_PERLIO)" == "define" |
| WIN32_SRC = $(WIN32_SRC) .\win32io.c |
| #!ENDIF |
| |
| |
| X2P_SRC = \ |
| ..\x2p\a2p.c \ |
| ..\x2p\hash.c \ |
| ..\x2p\str.c \ |
| ..\x2p\util.c \ |
| ..\x2p\walk.c |
| |
| CORE_NOCFG_H = \ |
| ..\av.h \ |
| ..\cop.h \ |
| ..\cv.h \ |
| ..\dosish.h \ |
| ..\embed.h \ |
| ..\form.h \ |
| ..\gv.h \ |
| ..\handy.h \ |
| ..\hv.h \ |
| ..\iperlsys.h \ |
| ..\mg.h \ |
| ..\nostdio.h \ |
| ..\op.h \ |
| ..\opcode.h \ |
| ..\perl.h \ |
| ..\perlapi.h \ |
| ..\perlsdio.h \ |
| ..\perlsfio.h \ |
| ..\perly.h \ |
| ..\pp.h \ |
| ..\proto.h \ |
| ..\regcomp.h \ |
| ..\regexp.h \ |
| ..\scope.h \ |
| ..\sv.h \ |
| ..\thread.h \ |
| ..\unixish.h \ |
| ..\utf8.h \ |
| ..\util.h \ |
| ..\warnings.h \ |
| ..\XSUB.h \ |
| ..\EXTERN.h \ |
| ..\perlvars.h \ |
| ..\intrpvar.h \ |
| .\include\dirent.h \ |
| .\include\netdb.h \ |
| .\include\sys\socket.h \ |
| .\win32.h |
| |
| CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h |
| |
| UUDMAP_H = ..\uudmap.h |
| BITCOUNT_H = ..\bitcount.h |
| MG_DATA_H = ..\mg_data.h |
| GENERATED_HEADERS = $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H) |
| |
| MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj) |
| CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj) |
| WIN32_OBJ = $(WIN32_SRC:.c=.obj) |
| MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \ |
| $(MINIDIR)\miniperlmain$(o) \ |
| $(MINIDIR)\perlio$(o) |
| MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\) |
| MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ) |
| DLL_OBJ = $(DYNALOADER) |
| X2P_OBJ = $(X2P_SRC:.c=.obj) |
| GENUUDMAP_OBJ = $(GENUUDMAP:.exe=.obj) |
| |
| PERLDLL_OBJ = $(CORE_OBJ) |
| PERLEXE_OBJ = perlmain$(o) |
| PERLEXEST_OBJ = perlmainst$(o) |
| |
| PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ) |
| |
| !IF "$(USE_SETARGV)" != "" |
| SETARGV_OBJ = setargv$(o) |
| !ENDIF |
| |
| !IF "$(ALL_STATIC)" == "define" |
| # some exclusions, unfortunately, until fixed: |
| # - Win32 extension contains overlapped symbols with win32.c (BUG!) |
| # - MakeMaker isn't capable enough for SDBM_File (smaller bug) |
| # - Encode (encoding search algorithm relies on shared library?) |
| STATIC_EXT = * !Win32 !SDBM_File !Encode |
| !ELSE |
| # specify static extensions here, for example: |
| #STATIC_EXT = Cwd Compress/Raw/Zlib |
| STATIC_EXT = Win32CORE |
| !ENDIF |
| |
| DYNALOADER = ..\DynaLoader$(o) |
| |
| CFG_VARS = \ |
| "INST_DRV=$(INST_DRV)" \ |
| "INST_TOP=$(INST_TOP)" \ |
| "INST_VER=$(INST_VER)" \ |
| "INST_ARCH=$(INST_ARCH)" \ |
| "archname=$(ARCHNAME)" \ |
| "cc=$(CC)" \ |
| "ld=$(LINK32)" \ |
| "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \ |
| "cf_email=$(EMAIL)" \ |
| "d_mymalloc=$(PERL_MALLOC)" \ |
| "libs=$(LIBFILES)" \ |
| "incpath=$(CCINCDIR:"=\")" \ |
| "libperl=$(PERLIMPLIB:..\=)" \ |
| "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \ |
| "libc=$(LIBC)" \ |
| "make=$(MAKE_BARE)" \ |
| "static_ext=$(STATIC_EXT)" \ |
| "usethreads=$(USE_ITHREADS)" \ |
| "useithreads=$(USE_ITHREADS)" \ |
| "usemultiplicity=$(USE_MULTI)" \ |
| "useperlio=$(USE_PERLIO)" \ |
| "uselargefiles=$(USE_LARGE_FILES)" \ |
| "usesitecustomize=$(USE_SITECUST)" \ |
| "LINK_FLAGS=$(LINK_FLAGS:"=\")" \ |
| "optimize=$(OPTIMIZE:"=\")" |
| |
| ICWD = -I..\dist\Cwd -I..\dist\Cwd\lib |
| |
| # |
| # Top targets |
| # |
| |
| all : .\config.h ..\git_version.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) \ |
| $(UNIDATAFILES) MakePPPort $(PERLEXE) $(X2P) Extensions_nonxs Extensions $(PERLSTATIC) |
| @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite. |
| |
| regnodes : ..\regnodes.h |
| |
| ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h |
| |
| ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h |
| |
| reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) \ |
| $(UNIDATAFILES) $(PERLEXE) $(X2P) Extensions_reonly |
| @echo Perl and 're' are up to date. |
| |
| static: $(PERLEXESTATIC) |
| |
| #------------------------------------------------------------ |
| |
| $(GLOBEXE) : perlglob$(o) |
| $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \ |
| perlglob$(o) setargv$(o) |
| $(EMBED_EXE_MANI) |
| |
| perlglob$(o) : perlglob.c |
| |
| config.w32 : $(CFGSH_TMPL) |
| copy $(CFGSH_TMPL) config.w32 |
| |
| .\config.h : $(CFGH_TMPL) |
| -del /f config.h |
| copy $(CFGH_TMPL) config.h |
| |
| ..\git_version.h : $(MINIPERL) ..\make_patchnum.pl |
| cd .. |
| miniperl -Ilib make_patchnum.pl |
| cd win32 |
| |
| # make sure that we recompile perl.c if the git version changes |
| ..\perl$(o) : ..\git_version.h |
| |
| ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm |
| $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh |
| |
| # this target is for when changes to the main config.sh happen. |
| # edit config.vc, then make perl in a minimal configuration (i.e. with MULTI, |
| # ITHREADS, IMP_SYS, LARGE_FILES and PERLIO off), then make this target |
| # to regenerate config_H.vc. |
| # unfortunately, some further manual editing is also then required to restore all |
| # the special __GNUC__ handling that is otherwise lost. |
| # repeat for config.vc64 and config_H.vc64 if you have a suitable build |
| # environment, otherwise hand-edit them to maintain the same differences with |
| # config.vc and config_H.vc as before. |
| regen_config_h: |
| $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh |
| $(MINIPERL) -I..\lib ..\configpm --chdir=.. |
| -del /f $(CFGH_TMPL) |
| -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)" |
| rename config.h $(CFGH_TMPL) |
| |
| $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl |
| $(MINIPERL) -I..\lib ..\configpm --chdir=.. |
| if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) |
| $(XCOPY) ..\*.h $(COREDIR)\*.* |
| $(XCOPY) *.h $(COREDIR)\*.* |
| $(RCOPY) include $(COREDIR)\*.* |
| -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)" |
| if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM) |
| |
| ..\lib\buildcustomize.pl: $(MINIPERL) ..\write_buildcustomize.pl |
| $(MINIPERL) -I..\lib ..\write_buildcustomize.pl .. >..\lib\buildcustomize.pl |
| |
| $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) |
| $(LINK32) -subsystem:console -out:$@ @<< |
| $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ) |
| << |
| $(EMBED_EXE_MANI) |
| |
| $(MINIDIR) : |
| if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" |
| |
| $(MINICORE_OBJ) : $(CORE_NOCFG_H) |
| $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*F).c |
| |
| $(MINIWIN32_OBJ) : $(CORE_NOCFG_H) |
| $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c |
| |
| # -DPERL_IMPLICIT_SYS needs C++ for perllib.c |
| # This is the only file that depends on perlhost.h, vmem.h, and vdir.h |
| !IF "$(USE_IMP_SYS)" == "define" |
| perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h |
| $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c |
| !ENDIF |
| |
| # 1. we don't want to rebuild miniperl.exe when config.h changes |
| # 2. we don't want to rebuild miniperl.exe with non-default config.h |
| # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it |
| $(MINI_OBJ) : $(CORE_NOCFG_H) |
| |
| $(WIN32_OBJ) : $(CORE_H) |
| $(CORE_OBJ) : $(CORE_H) |
| $(DLL_OBJ) : $(CORE_H) |
| $(X2P_OBJ) : $(CORE_H) |
| |
| perldll.def : $(MINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl create_perllibst_h.pl |
| $(MINIPERL) -I..\lib create_perllibst_h.pl |
| $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \ |
| CCTYPE=$(CCTYPE) TARG_DIR=..\ > perldll.def |
| |
| $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static |
| $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<< |
| $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES) |
| << |
| $(EMBED_DLL_MANI) |
| $(XCOPY) $(PERLIMPLIB) $(COREDIR) |
| |
| $(PERLSTATICLIB): Extensions_static |
| $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static @<< |
| $(PERLDLL_OBJ) |
| << |
| $(XCOPY) $(PERLSTATICLIB) $(COREDIR) |
| |
| $(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO) |
| |
| $(MINIMOD) : $(MINIPERL) ..\minimod.pl |
| cd .. |
| miniperl minimod.pl > lib\ExtUtils\Miniperl.pm |
| cd win32 |
| |
| ..\x2p\a2p$(o) : ..\x2p\a2p.c |
| $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c |
| |
| ..\x2p\hash$(o) : ..\x2p\hash.c |
| $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c |
| |
| ..\x2p\str$(o) : ..\x2p\str.c |
| $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c |
| |
| ..\x2p\util$(o) : ..\x2p\util.c |
| $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c |
| |
| ..\x2p\walk$(o) : ..\x2p\walk.c |
| $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c |
| |
| $(X2P) : $(MINIPERL) $(X2P_OBJ) Extensions |
| $(MINIPERL) -I..\lib ..\x2p\find2perl.PL |
| $(MINIPERL) -I..\lib ..\x2p\s2p.PL |
| $(LINK32) -subsystem:console -out:$@ @<< |
| $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ) |
| << |
| $(EMBED_EXE_MANI) |
| |
| $(MINIDIR)\globals$(o) : $(GENERATED_HEADERS) |
| |
| $(UUDMAP_H) $(MG_DATA_H) : $(BITCOUNT_H) |
| |
| $(BITCOUNT_H) : $(GENUUDMAP) |
| $(GENUUDMAP) $(GENERATED_HEADERS) |
| |
| $(GENUUDMAP_OBJ) : ..\mg_raw.h |
| |
| $(GENUUDMAP) : $(GENUUDMAP_OBJ) |
| $(LINK32) -subsystem:console -out:$@ @<< |
| $(LINK_FLAGS) $(LIBFILES) $(GENUUDMAP_OBJ) |
| << |
| $(EMBED_EXE_MANI) |
| |
| perlmain.c : runperl.c |
| copy runperl.c perlmain.c |
| |
| perlmain$(o) : perlmain.c |
| $(CC) $(CFLAGS_O:-DPERLDLL=-UPERLDLL) $(OBJOUT_FLAG)$@ -c perlmain.c |
| |
| perlmainst.c : runperl.c |
| copy runperl.c perlmainst.c |
| |
| perlmainst$(o) : perlmainst.c |
| $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c |
| |
| $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) |
| $(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) \ |
| $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) |
| $(EMBED_EXE_MANI) |
| copy $(PERLEXE) $(WPERLEXE) |
| $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS |
| |
| $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES) |
| $(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) \ |
| @Extensions_static $(PERLSTATICLIB) /PDB:NONE \ |
| $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES) |
| $(EMBED_EXE_MANI) |
| |
| MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs |
| $(MINIPERL) -I..\lib $(ICWD) ..\mkppport |
| |
| #------------------------------------------------------------------------------- |
| # There's no direct way to mark a dependency on |
| # DynaLoader.pm, so this will have to do |
| Extensions: ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER) |
| $(XCOPY) ..\*.h $(COREDIR)\*.* |
| $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic |
| |
| Extensions_reonly: ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER) |
| $(XCOPY) ..\*.h $(COREDIR)\*.* |
| $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re |
| |
| Extensions_static : ..\make_ext.pl ..\lib\buildcustomize.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM) |
| $(XCOPY) ..\*.h $(COREDIR)\*.* |
| $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static |
| $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static |
| |
| Extensions_nonxs: ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) ..\pod\perlfunc.pod |
| $(XCOPY) ..\*.h $(COREDIR)\*.* |
| $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs |
| |
| $(DYNALOADER) : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs |
| $(XCOPY) ..\*.h $(COREDIR)\*.* |
| $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader |
| |
| Extensions_clean: |
| -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean |
| |
| Extensions_realclean: |
| -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean |
| |
| #------------------------------------------------------------------------------- |
| |
| doc: $(PERLEXE) ..\pod\perltoc.pod |
| $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \ |
| --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \ |
| --recurse |
| |
| # Note that this next section is parsed (and regenerated) by pod/buildtoc |
| # so please check that script before making structural changes here |
| |
| utils: $(PERLEXE) $(X2P) |
| cd ..\utils |
| $(MAKE) PERL=$(MINIPERL) |
| cd ..\pod |
| copy ..\README.aix ..\pod\perlaix.pod |
| copy ..\README.amiga ..\pod\perlamiga.pod |
| copy ..\README.beos ..\pod\perlbeos.pod |
| copy ..\README.bs2000 ..\pod\perlbs2000.pod |
| copy ..\README.ce ..\pod\perlce.pod |
| copy ..\README.cn ..\pod\perlcn.pod |
| copy ..\README.cygwin ..\pod\perlcygwin.pod |
| copy ..\README.dgux ..\pod\perldgux.pod |
| copy ..\README.dos ..\pod\perldos.pod |
| copy ..\README.epoc ..\pod\perlepoc.pod |
| copy ..\README.freebsd ..\pod\perlfreebsd.pod |
| copy ..\README.haiku ..\pod\perlhaiku.pod |
| copy ..\README.hpux ..\pod\perlhpux.pod |
| copy ..\README.hurd ..\pod\perlhurd.pod |
| copy ..\README.irix ..\pod\perlirix.pod |
| copy ..\README.jp ..\pod\perljp.pod |
| copy ..\README.ko ..\pod\perlko.pod |
| copy ..\README.linux ..\pod\perllinux.pod |
| copy ..\README.macos ..\pod\perlmacos.pod |
| copy ..\README.macosx ..\pod\perlmacosx.pod |
| copy ..\README.mpeix ..\pod\perlmpeix.pod |
| copy ..\README.netware ..\pod\perlnetware.pod |
| copy ..\README.openbsd ..\pod\perlopenbsd.pod |
| copy ..\README.os2 ..\pod\perlos2.pod |
| copy ..\README.os390 ..\pod\perlos390.pod |
| copy ..\README.os400 ..\pod\perlos400.pod |
| copy ..\README.plan9 ..\pod\perlplan9.pod |
| copy ..\README.qnx ..\pod\perlqnx.pod |
| copy ..\README.riscos ..\pod\perlriscos.pod |
| copy ..\README.solaris ..\pod\perlsolaris.pod |
| copy ..\README.symbian ..\pod\perlsymbian.pod |
| copy ..\README.tru64 ..\pod\perltru64.pod |
| copy ..\README.tw ..\pod\perltw.pod |
| copy ..\README.uts ..\pod\perluts.pod |
| copy ..\README.vmesa ..\pod\perlvmesa.pod |
| copy ..\README.vos ..\pod\perlvos.pod |
| copy ..\README.win32 ..\pod\perlwin32.pod |
| copy ..\pod\perldelta.pod ..\pod\perl5162delta.pod |
| cd ..\win32 |
| $(PERLEXE) $(PL2BAT) $(UTILS) |
| $(PERLEXE) $(ICWD) ..\autodoc.pl .. |
| $(PERLEXE) $(ICWD) ..\pod\perlmodlib.pl -q |
| |
| ..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs |
| $(PERLEXE) -f ..\pod\buildtoc -q |
| |
| # Note that the pod cleanup in this next section is parsed (and regenerated |
| # by pod/buildtoc so please check that script before making changes here |
| |
| distclean: realclean |
| -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ |
| $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) \ |
| $(PERLEXESTATIC) $(PERLSTATICLIB) |
| -del /f *.def *.map |
| -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm |
| -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm |
| -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm |
| -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm |
| -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm |
| -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm |
| -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm |
| -del /f $(LIBDIR)\File\Glob.pm |
| -del /f $(LIBDIR)\Storable.pm |
| -del /f $(LIBDIR)\Sys\Hostname.pm |
| -del /f $(LIBDIR)\Time\HiRes.pm |
| -del /f $(LIBDIR)\Unicode\Normalize.pm |
| -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm |
| -del /f $(LIBDIR)\Win32.pm |
| -del /f $(LIBDIR)\Win32CORE.pm |
| -del /f $(LIBDIR)\Win32API\File.pm |
| -del /f $(LIBDIR)\Win32API\File\cFile.pc |
| -del /f $(LIBDIR)\buildcustomize.pl |
| -del /f $(DISTDIR)\XSLoader\XSLoader.pm |
| -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App |
| -if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive |
| -if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute |
| -if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie |
| -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B |
| -if exist $(LIBDIR)\CGI rmdir /s /q $(LIBDIR)\CGI |
| -if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN |
| -if exist $(LIBDIR)\CPANPLUS rmdir /s /q $(LIBDIR)\CPANPLUS |
| -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress |
| -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data |
| -if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel |
| -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest |
| -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode |
| -if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding |
| -if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder |
| -if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command |
| -if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant |
| -if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist |
| -if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker |
| -if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec |
| -if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter |
| -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash |
| -if exist $(LIBDIR)\I18N\LangTags rmdir /s /q $(LIBDIR)\I18N\LangTags |
| -if exist $(LIBDIR)\inc rmdir /s /q $(LIBDIR)\inc |
| -if exist $(LIBDIR)\Module\Pluggable rmdir /s /q $(LIBDIR)\Module\Pluggable |
| -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO |
| -if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC |
| -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List |
| -if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale |
| -if exist $(LIBDIR)\Log rmdir /s /q $(LIBDIR)\Log |
| -if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math |
| -if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize |
| -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME |
| -if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module |
| -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro |
| -if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP |
| -if exist $(LIBDIR)\Object rmdir /s /q $(LIBDIR)\Object |
| -if exist $(LIBDIR)\Package rmdir /s /q $(LIBDIR)\Package |
| -if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params |
| -if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse |
| -if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO |
| -if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc |
| -if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple |
| -if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text |
| -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re |
| -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar |
| -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys |
| -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP |
| -if exist $(LIBDIR)\Term\UI rmdir /s /q $(LIBDIR)\Term\UI |
| -if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test |
| -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread |
| -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads |
| -if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash |
| -if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate |
| -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS |
| -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API |
| -cd $(PODDIR) && del /f *.html *.bat roffitall \ |
| perl5162delta.pod perlaix.pod perlamiga.pod perlapi.pod \ |
| perlbeos.pod perlbs2000.pod perlce.pod perlcn.pod \ |
| perlcygwin.pod perldgux.pod perldos.pod perlepoc.pod \ |
| perlfreebsd.pod perlhaiku.pod perlhpux.pod perlhurd.pod \ |
| perlintern.pod perlirix.pod perljp.pod perlko.pod perllinux.pod \ |
| perlmacos.pod perlmacosx.pod perlmodlib.pod perlmpeix.pod \ |
| perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \ |
| perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \ |
| perlsolaris.pod perlsymbian.pod perltoc.pod perltru64.pod \ |
| perltw.pod perluniprops.pod perluts.pod perlvmesa.pod \ |
| perlvos.pod perlwin32.pod |
| -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \ |
| perldoc perlivp libnetcfg enc2xs piconv cpan *.bat \ |
| xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep cpanp-run-perl cpanp cpan2dist shasum corelist config_data zipdetails |
| -cd ..\x2p && del /f find2perl s2p psed *.bat |
| -del /f ..\config.sh perlmain.c dlutils.c config.h.new \ |
| perlmainst.c |
| -del /f $(CONFIGPM) |
| -del /f ..\lib\Config_git.pl |
| -del /f bin\*.bat |
| -del /f perllibst.h |
| -del /f $(PERLEXE_RES) perl.base |
| -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib ppport.h |
| -cd $(EXTDIR) && del /s *.def Makefile Makefile.old |
| -cd $(DISTDIR) && del /s *.def Makefile Makefile.old |
| -cd $(CPANDIR) && del /s *.def Makefile Makefile.old |
| -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) |
| -if exist $(COREDIR) rmdir /s /q $(COREDIR) |
| -if exist pod2htmd.tmp del pod2htmd.tmp |
| -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR) |
| -del /f ..\t\test_state |
| |
| install : all installbare installhtml |
| |
| installbare : utils ..\pod\perltoc.pod |
| $(PERLEXE) ..\installperl |
| if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* |
| if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.* |
| $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* |
| if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.* |
| if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.* |
| $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* |
| |
| installhtml : doc |
| $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.* |
| |
| inst_lib : $(CONFIGPM) |
| $(RCOPY) ..\lib $(INST_LIB)\*.* |
| |
| $(UNIDATAFILES) ..\pod\perluniprops.pod : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs |
| cd ..\lib\unicore && \ |
| ..\$(MINIPERL) -I.. -I..\..\dist\Cwd\lib -I..\..\dist\Cwd mktables -P ..\..\pod -maketest -makelist -p -check $@ $(FIRSTUNIFILE) |
| |
| minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES) |
| $(XCOPY) $(MINIPERL) ..\t\$(NULL) |
| if exist ..\t\perl.exe del /f ..\t\perl.exe |
| rename ..\t\miniperl.exe perl.exe |
| $(XCOPY) $(GLOBEXE) ..\t\$(NULL) |
| attrib -r ..\t\*.* |
| cd ..\t && \ |
| $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t |
| |
| test-prep : all utils ../pod/perltoc.pod |
| $(XCOPY) $(PERLEXE) ..\t\$(NULL) |
| $(XCOPY) $(PERLDLL) ..\t\$(NULL) |
| $(XCOPY) $(GLOBEXE) ..\t\$(NULL) |
| set PERL_STATIC_EXT=$(STATIC_EXT) |
| |
| test : test-prep |
| cd ..\t |
| $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES) |
| cd ..\win32 |
| |
| test_porting : test-prep |
| cd ..\t |
| $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t |
| cd ..\win32 |
| |
| test-reonly : reonly utils |
| $(XCOPY) $(PERLEXE) ..\t\$(NULL) |
| $(XCOPY) $(PERLDLL) ..\t\$(NULL) |
| $(XCOPY) $(GLOBEXE) ..\t\$(NULL) |
| cd ..\t |
| $(PERLEXE) -I..\lib harness $(OPT) -re \bre\\/ $(EXTRA) |
| cd ..\win32 |
| |
| regen : |
| cd .. |
| regen.pl |
| cd win32 |
| |
| test-notty : test-prep |
| set PERL_SKIP_TTY_TEST=1 |
| cd ..\t |
| $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES) |
| cd ..\win32 |
| |
| _test : |
| $(XCOPY) $(PERLEXE) ..\t\$(NULL) |
| $(XCOPY) $(PERLDLL) ..\t\$(NULL) |
| $(XCOPY) $(GLOBEXE) ..\t\$(NULL) |
| cd ..\t |
| $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES) |
| cd ..\win32 |
| |
| _clean : |
| -@$(DEL) miniperlmain$(o) |
| -@$(DEL) $(MINIPERL) |
| -@$(DEL) perlglob$(o) |
| -@$(DEL) perlmain$(o) |
| -@$(DEL) perlmainst$(o) |
| -@$(DEL) config.w32 |
| -@$(DEL) config.h |
| -@$(DEL) ..\git_version.h |
| -@$(DEL) $(GLOBEXE) |
| -@$(DEL) $(PERLEXE) |
| -@$(DEL) $(WPERLEXE) |
| -@$(DEL) $(PERLEXESTATIC) |
| -@$(DEL) $(PERLSTATICLIB) |
| -@$(DEL) $(PERLDLL) |
| -@$(DEL) $(CORE_OBJ) |
| -@$(DEL) $(GENUUDMAP) $(GENUUDMAP_OBJ) $(GENERATED_HEADERS) |
| -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) |
| -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1) |
| -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2) |
| -@$(DEL) $(UNIDATAFILES) |
| -@$(DEL) $(WIN32_OBJ) |
| -@$(DEL) $(DLL_OBJ) |
| -@$(DEL) $(X2P_OBJ) |
| -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res |
| -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat |
| -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat |
| -@$(DEL) *.ilk |
| -@$(DEL) *.pdb |
| -@$(DEL) Extensions_static |
| |
| clean : Extensions_clean _clean |
| |
| realclean : Extensions_realclean _clean |
| |
| # Handy way to run perlbug -ok without having to install and run the |
| # installed perlbug. We don't re-run the tests here - we trust the user. |
| # Please *don't* use this unless all tests pass. |
| # If you want to report test failures, use "nmake nok" instead. |
| ok: utils |
| $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" |
| |
| okfile: utils |
| $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok |
| |
| nok: utils |
| $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" |
| |
| nokfile: utils |
| $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok |