perl-5.16.2/cpan/ExtUtils-MakeMaker/t/basic.t - toolchain/perl - Git at Google

 #!/usr/bin/perl -w

 # This test puts MakeMaker through the paces of a basic perl module
 # build, test and installation of the Big::Fat::Dummy module.

 BEGIN {
     unshift @INC, 't/lib';
 }

 use strict;
 use Config;
 use ExtUtils::MakeMaker;

 use Test::More tests => 171;
 use MakeMaker::Test::Utils;
 use MakeMaker::Test::Setup::BFD;
 use File::Find;
 use File::Spec;
 use File::Path;

 my $perl = which_perl();
 my $Is_VMS = $^O eq 'VMS';

 chdir 't';

 perl_lib;

 my $Touch_Time = calibrate_mtime();

 $| = 1;

 ok( setup_recurs(), 'setup' );
 END {
     ok chdir File::Spec->updir or die;
     ok teardown_recurs, "teardown";
 }

 ok( chdir('Big-Dummy'), "chdir'd to Big-Dummy" ) ||
   diag("chdir failed: $!");

 my @mpl_out = run(qq{$perl Makefile.PL "PREFIX=../dummy-install"});
 END { rmtree '../dummy-install'; }

 cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) ||
   diag(@mpl_out);

 my $makefile = makefile_name();
 ok( grep(/^Writing $makefile for Big::Dummy/,
          @mpl_out) == 1,
                                            'Makefile.PL output looks right');

 ok( grep(/^Current package is: main$/,
          @mpl_out) == 1,
                                            'Makefile.PL run in package main');

 ok( -e $makefile,       'Makefile exists' );

 # -M is flakey on VMS
 my $mtime = (stat($makefile))[9];
 cmp_ok( $Touch_Time, '<=', $mtime,  '  its been touched' );

 END { unlink makefile_name(), makefile_backup() }

 my $make = make_run();

 {
     # Supress 'make manifest' noise
     local $ENV{PERL_MM_MANIFEST_VERBOSE} = 0;
     my $manifest_out = run("$make manifest");
     ok( -e 'MANIFEST',      'make manifest created a MANIFEST' );
     ok( -s 'MANIFEST',      '  its not empty' );
 }

 END { unlink 'MANIFEST'; }

 my $ppd_out = run("$make ppd");
 is( $?, 0,                      '  exited normally' ) || diag $ppd_out;
 ok( open(PPD, 'Big-Dummy.ppd'), '  .ppd file generated' );
 my $ppd_html;
 { local $/; $ppd_html = <PPD> }
 close PPD;
 like( $ppd_html, qr{^<SOFTPKG NAME="Big-Dummy" VERSION="0.01">}m,
                                                            '  <SOFTPKG>' );
 like( $ppd_html,
       qr{^\s*<ABSTRACT>Try "our" hot dog's, \$andwiche\$ and \$\(ub\)\$!</ABSTRACT>}m,
                                                            '  <ABSTRACT>');
 like( $ppd_html,
       qr{^\s*<AUTHOR>Michael G Schwern &lt;schwern\@pobox.com&gt;</AUTHOR>}m,
                                                            '  <AUTHOR>'  );
 like( $ppd_html, qr{^\s*<IMPLEMENTATION>}m,          '  <IMPLEMENTATION>');
 like( $ppd_html, qr{^\s*<REQUIRE NAME="strict::" />}m,  '  <REQUIRE>' );
 unlike( $ppd_html, qr{^\s*<REQUIRE NAME="warnings::" />}m,  'no <REQUIRE> for build_require' );

 my $archname = $Config{archname};
 if( $] >= 5.008 ) {
     # XXX This is a copy of the internal logic, so it's not a great test
     $archname .= "-$Config{PERL_REVISION}.$Config{PERL_VERSION}";
 }
 like( $ppd_html, qr{^\s*<ARCHITECTURE NAME="$archname" />}m,
                                                            '  <ARCHITECTURE>');
 like( $ppd_html, qr{^\s*<CODEBASE HREF="" />}m,            '  <CODEBASE>');
 like( $ppd_html, qr{^\s*</IMPLEMENTATION>}m,           '  </IMPLEMENTATION>');
 like( $ppd_html, qr{^\s*</SOFTPKG>}m,                      '  </SOFTPKG>');
 END { unlink 'Big-Dummy.ppd' }


 my $test_out = run("$make test");
 like( $test_out, qr/All tests successful/, 'make test' );
 is( $?, 0,                                 '  exited normally' ) ||
     diag $test_out;

 # Test 'make test TEST_VERBOSE=1'
 my $make_test_verbose = make_macro($make, 'test', TEST_VERBOSE => 1);
 $test_out = run("$make_test_verbose");
 like( $test_out, qr/ok \d+ - TEST_VERBOSE/, 'TEST_VERBOSE' );
 like( $test_out, qr/All tests successful/,  '  successful' );
 is( $?, 0,                                  '  exited normally' ) ||
     diag $test_out;


 my $install_out = run("$make install");
 is( $?, 0, 'install' ) || diag $install_out;
 like( $install_out, qr/^Installing /m );

 ok( -r '../dummy-install',     '  install dir created' );
 my %files = ();
 find( sub {
     # do it case-insensitive for non-case preserving OSs
     my $file = lc $_;

     # VMS likes to put dots on the end of things that don't have them.
     $file =~ s/\.$// if $Is_VMS;

     $files{$file} = $File::Find::name;
 }, '../dummy-install' );
 ok( $files{'dummy.pm'},     '  Dummy.pm installed' );
 ok( $files{'liar.pm'},      '  Liar.pm installed'  );
 ok( $files{'program'},      '  program installed'  );
 ok( $files{'.packlist'},    '  packlist created'   );
 ok( $files{'perllocal.pod'},'  perllocal.pod created' );


 SKIP: {
     skip 'VMS install targets do not preserve $(PREFIX)', 8 if $Is_VMS;

     $install_out = run("$make install PREFIX=elsewhere");
     is( $?, 0, 'install with PREFIX override' ) || diag $install_out;
     like( $install_out, qr/^Installing /m );

     ok( -r 'elsewhere',     '  install dir created' );
     %files = ();
     find( sub { $files{$_} = $File::Find::name; }, 'elsewhere' );
     ok( $files{'Dummy.pm'},     '  Dummy.pm installed' );
     ok( $files{'Liar.pm'},      '  Liar.pm installed'  );
     ok( $files{'program'},      '  program installed'  );
     ok( $files{'.packlist'},    '  packlist created'   );
     ok( $files{'perllocal.pod'},'  perllocal.pod created' );
     rmtree('elsewhere');
 }


 SKIP: {
     skip 'VMS install targets do not preserve $(DESTDIR)', 10 if $Is_VMS;

     $install_out = run("$make install PREFIX= DESTDIR=other");
     is( $?, 0, 'install with DESTDIR' ) ||
         diag $install_out;
     like( $install_out, qr/^Installing /m );

     ok( -d 'other',  '  destdir created' );
     %files = ();
     my $perllocal;
     find( sub {
         $files{$_} = $File::Find::name;
     }, 'other' );
     ok( $files{'Dummy.pm'},     '  Dummy.pm installed' );
     ok( $files{'Liar.pm'},      '  Liar.pm installed'  );
     ok( $files{'program'},      '  program installed'  );
     ok( $files{'.packlist'},    '  packlist created'   );
     ok( $files{'perllocal.pod'},'  perllocal.pod created' );

     ok( open(PERLLOCAL, $files{'perllocal.pod'} ) ) ||
         diag("Can't open $files{'perllocal.pod'}: $!");
     { local $/;
       unlike(<PERLLOCAL>, qr/other/, 'DESTDIR should not appear in perllocal');
     }
     close PERLLOCAL;

 # TODO not available in the min version of Test::Harness we require
 #    ok( open(PACKLIST, $files{'.packlist'} ) ) ||
 #        diag("Can't open $files{'.packlist'}: $!");
 #    { local $/;
 #      local $TODO = 'DESTDIR still in .packlist';
 #      unlike(<PACKLIST>, qr/other/, 'DESTDIR should not appear in .packlist');
 #    }
 #    close PACKLIST;

     rmtree('other');
 }


 SKIP: {
     skip 'VMS install targets do not preserve $(PREFIX)', 9 if $Is_VMS;

     $install_out = run("$make install PREFIX=elsewhere DESTDIR=other/");
     is( $?, 0, 'install with PREFIX override and DESTDIR' ) ||
         diag $install_out;
     like( $install_out, qr/^Installing /m );

     ok( !-d 'elsewhere',       '  install dir not created' );
     ok( -d 'other/elsewhere',  '  destdir created' );
     %files = ();
     find( sub { $files{$_} = $File::Find::name; }, 'other/elsewhere' );
     ok( $files{'Dummy.pm'},     '  Dummy.pm installed' );
     ok( $files{'Liar.pm'},      '  Liar.pm installed'  );
     ok( $files{'program'},      '  program installed'  );
     ok( $files{'.packlist'},    '  packlist created'   );
     ok( $files{'perllocal.pod'},'  perllocal.pod created' );
     rmtree('other');
 }


 my $dist_test_out = run("$make disttest");
 is( $?, 0, 'disttest' ) || diag($dist_test_out);

 # Test META.yml generation
 use ExtUtils::Manifest qw(maniread);

 my $distdir  = 'Big-Dummy-0.01';
 $distdir =~ s/\./_/g if $Is_VMS;
 my $meta_yml = "$distdir/META.yml";
 my $mymeta_yml = "$distdir/MYMETA.yml";
 my $meta_json = "$distdir/META.json";
 my $mymeta_json = "$distdir/MYMETA.json";

 note "META file validity"; {
     require CPAN::Meta;

     ok( !-f 'META.yml',  'META.yml not written to source dir' );
     ok( -f $meta_yml,    'META.yml written to dist dir' );
     ok( !-e "META_new.yml", 'temp META.yml file not left around' );

     ok( -f 'MYMETA.yml',  'MYMETA.yml is written to source dir' );
     ok( -f $mymeta_yml,    'MYMETA.yml is written to dist dir on disttest' );

     ok( !-f 'META.json',  'META.json not written to source dir' );
     ok( -f $meta_json,    'META.json written to dist dir' );
     ok( !-e "META_new.json", 'temp META.json file not left around' );

     ok( -f 'MYMETA.json',  'MYMETA.json is written to source dir' );
     ok( -f $mymeta_json,    'MYMETA.json is written to dist dir on disttest' );

     for my $case (
       ['META.yml', $meta_yml],
       ['MYMETA.yml', $mymeta_yml],
       ['META.json', $meta_json],
       ['MYMETA.json', $mymeta_json],
       ['MYMETA.yml', 'MYMETA.yml'],
       ['MYMETA.json', 'MYMETA.json'],
     ) {
       my ($label, $meta_name) = @$case;
       ok(
         my $obj = eval {
           CPAN::Meta->load_file($meta_name, {lazy_validation => 0})
         },
         "$label validates"
       );
       my $is = sub {
         my ($m,$e) = @_;
         is($obj->$m, $e, "$label -> $m")
       };
       my $is_list = sub {
         my ($m,$e) = @_;
         is_deeply([$obj->$m], $e, "$label -> $m")
       };
       my $is_map = sub {
         my ($m,$e) = @_;
         is_deeply($obj->$m, $e, "$label -> $m")
       };
       $is->( name => "Big-Dummy" );
       $is->( version => "0.01" );
       $is->( abstract => q{Try "our" hot dog's, $andwiche$ and $(ub)$!} );
       $is_list->( licenses => [q{unknown}] );
       $is_list->( authors => [ q{Michael G Schwern <schwern@pobox.com>} ] );
       $is_map->( prereqs => {
           configure => {
             requires => {
               'ExtUtils::MakeMaker' => 0
             },
           },
           build => {
             requires => {
               'warnings' => 0
             }
           },
           runtime => {
             requires => {
               'strict' => 0
             }
           },
         }
       );
       $is_map->(
         no_index => {
           directory => [qw/t inc/],
         }
       );
       $is->( dynamic_config => ($label =~ /MYMETA/) ? 0 : 1 );
     }

     my $manifest = maniread("$distdir/MANIFEST");
     # VMS is non-case preserving, so we can't know what the MANIFEST will
     # look like. :(
     _normalize($manifest);
     is( $manifest->{'meta.yml'}, 'Module YAML meta-data (added by MakeMaker)',
       "MANIFEST has META.yml"
     );
     is( $manifest->{'meta.json'}, 'Module JSON meta-data (added by MakeMaker)',
       "MANFIEST has META.json"
     );

     # Test NO_META META.yml suppression
     for my $f ( $meta_yml, $meta_json, 'MYMETA.yml', 'MYMETA.json' ) {
       1 while unlink $f;
     }
     ok( !-f $meta_yml,   'META.yml deleted' );
     ok( !-f 'MYMETA.yml','MYMETA.yml deleted' );
     ok( !-f $meta_json,   'META.json deleted' );
     ok( !-f 'MYMETA.json','MYMETA.json deleted' );

     @mpl_out = run(qq{$perl Makefile.PL "NO_META=1"});
     ok( -f 'MYMETA.yml', 'MYMETA.yml generation not suppressed by NO_META' );
     ok( -f 'MYMETA.json', 'MYMETA.json generation not suppressed by NO_META' );
     cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) || diag(@mpl_out);
     ok( !-f $meta_yml,   'META.yml generation suppressed by NO_META' );
     ok( !-f $meta_json,   'META.json generation suppressed by NO_META' );
     my $distdir_out = run("$make distdir");
     is( $?, 0, 'distdir' ) || diag($distdir_out);
     ok( !-f $meta_yml,   'META.yml generation suppressed by NO_META' );
     ok( !-f $meta_json,   'META.json generation suppressed by NO_META' );

     for my $f ( 'MYMETA.yml', 'MYMETA.json' ) {
       1 while unlink $f;
     }
     ok( !-f 'MYMETA.yml','MYMETA.yml deleted' );
     ok( !-f 'MYMETA.json','MYMETA.json deleted' );

     @mpl_out = run(qq{$perl Makefile.PL "NO_MYMETA=1"});
     cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) || diag(@mpl_out);
     $distdir_out = run("$make distdir");
     is( $?, 0, 'distdir' ) || diag($distdir_out);
     ok( !-f 'MYMETA.yml','MYMETA.yml generation suppressed by NO_MYMETA' );
     ok( !-f 'MYMETA.json','MYMETA.json generation suppressed by NO_MYMETA' );
     ok( -f $meta_yml,    'META.yml generation not suppressed by NO_MYMETA' );
     ok( -f $meta_json,    'META.json generation not suppressed by NO_MYMETA' );

     # Test MYMETA really comes from META except for prereqs
     for my $f ( $meta_yml, $meta_json, 'MYMETA.yml', 'MYMETA.json' ) {
       1 while unlink $f;
     }
     @mpl_out = run(qq{$perl Makefile.PL});
     cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) || diag(@mpl_out);
     $distdir_out = run("$make distdir");
     is( $?, 0, 'distdir' ) || diag($distdir_out);
     ok( -f $meta_yml,    'META.yml generated in distdir' );
     ok( -f $meta_json,    'META.json generated in distdir' );
     ok( ! -f $mymeta_yml,    'MYMETA.yml not yet generated in distdir' );
     ok( ! -f $mymeta_json,    'MYMETA.json generated in distdir' );
     my $edit_meta = CPAN::Meta->load_file($meta_json)->as_struct;
     $edit_meta->{abstract} = "New abstract";
     my $meta_obj = CPAN::Meta->new($edit_meta);
     is( $meta_obj->abstract, "New abstract", "MYMETA abstract from META, not Makefile.PL");
     ok( $meta_obj->save($meta_json), "Saved edited META.json in distdir" );
     ok( $meta_obj->save($meta_yml, {version => 1.4}), "Saved edited META.yml in distdir");
     ok( chdir $distdir );
     ok( -f 'META.yml',    'META.yml confirmed in distdir' );
     ok( -f 'META.json',    'META.json confirmed in distdir' );
     @mpl_out = run(qq{$perl Makefile.PL});
     cmp_ok( $?, '==', 0, 'Makefile.PL in distdir exited with zero' ) || diag(@mpl_out);
     ok( chdir File::Spec->updir );
     ok( -f $mymeta_yml,    'MYMETA.yml generated in distdir' );
     ok( -f $mymeta_json,    'MYMETA.json generated in distdir' );
     $meta_obj = CPAN::Meta->load_file($meta_json);
     is( $meta_obj->abstract, "New abstract", "META abstract is same as was saved");
     $meta_obj = CPAN::Meta->load_file($mymeta_json);
     is( $meta_obj->abstract, "New abstract", "MYMETA abstract from META, not Makefile.PL");
 }


 # Make sure init_dirscan doesn't go into the distdir
 @mpl_out = run(qq{$perl Makefile.PL "PREFIX=../dummy-install"});

 cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) || diag(@mpl_out);

 ok( grep(/^Writing $makefile for Big::Dummy/, @mpl_out) == 1,
                                 'init_dirscan skipped distdir') ||
   diag(@mpl_out);

 # I know we'll get ignored errors from make here, that's ok.
 # Send STDERR off to oblivion.
 open(SAVERR, ">&STDERR") or die $!;
 open(STDERR, ">",File::Spec->devnull) or die $!;

 my $realclean_out = run("$make realclean");
 is( $?, 0, 'realclean' ) || diag($realclean_out);

 open(STDERR, ">&SAVERR") or die $!;
 close SAVERR;


 sub _normalize {
     my $hash = shift;

     while(my($k,$v) = each %$hash) {
         delete $hash->{$k};
         $hash->{lc $k} = $v;
     }
 }
	#!/usr/bin/perl -w

	# This test puts MakeMaker through the paces of a basic perl module
	# build, test and installation of the Big::Fat::Dummy module.

	BEGIN {
	unshift @INC, 't/lib';
	}

	use strict;
	use Config;
	use ExtUtils::MakeMaker;

	use Test::More tests => 171;
	use MakeMaker::Test::Utils;
	use MakeMaker::Test::Setup::BFD;
	use File::Find;
	use File::Spec;
	use File::Path;

	my $perl = which_perl();
	my $Is_VMS = $^O eq 'VMS';

	chdir 't';

	perl_lib;

	my $Touch_Time = calibrate_mtime();

	$\| = 1;

	ok( setup_recurs(), 'setup' );
	END {
	ok chdir File::Spec->updir or die;
	ok teardown_recurs, "teardown";
	}

	ok( chdir('Big-Dummy'), "chdir'd to Big-Dummy" ) \|\|
	diag("chdir failed: $!");

	my @mpl_out = run(qq{$perl Makefile.PL "PREFIX=../dummy-install"});
	END { rmtree '../dummy-install'; }

	cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) \|\|
	diag(@mpl_out);

	my $makefile = makefile_name();
	ok( grep(/^Writing $makefile for Big::Dummy/,
	@mpl_out) == 1,
	'Makefile.PL output looks right');

	ok( grep(/^Current package is: main$/,
	@mpl_out) == 1,
	'Makefile.PL run in package main');

	ok( -e $makefile, 'Makefile exists' );

	# -M is flakey on VMS
	my $mtime = (stat($makefile))[9];
	cmp_ok( $Touch_Time, '<=', $mtime, ' its been touched' );

	END { unlink makefile_name(), makefile_backup() }

	my $make = make_run();

	{
	# Supress 'make manifest' noise
	local $ENV{PERL_MM_MANIFEST_VERBOSE} = 0;
	my $manifest_out = run("$make manifest");
	ok( -e 'MANIFEST', 'make manifest created a MANIFEST' );
	ok( -s 'MANIFEST', ' its not empty' );
	}

	END { unlink 'MANIFEST'; }

	my $ppd_out = run("$make ppd");
	is( $?, 0, ' exited normally' ) \|\| diag $ppd_out;
	ok( open(PPD, 'Big-Dummy.ppd'), ' .ppd file generated' );
	my $ppd_html;
	{ local $/; $ppd_html = <PPD> }
	close PPD;
	like( $ppd_html, qr{^<SOFTPKG NAME="Big-Dummy" VERSION="0.01">}m,
	' <SOFTPKG>' );
	like( $ppd_html,
	qr{^\s*<ABSTRACT>Try "our" hot dog's, \$andwiche\$ and \$\(ub\)\$!</ABSTRACT>}m,
	' <ABSTRACT>');
	like( $ppd_html,
	qr{^\s*<AUTHOR>Michael G Schwern <schwern\@pobox.com></AUTHOR>}m,
	' <AUTHOR>' );
	like( $ppd_html, qr{^\s*<IMPLEMENTATION>}m, ' <IMPLEMENTATION>');
	like( $ppd_html, qr{^\s*<REQUIRE NAME="strict::" />}m, ' <REQUIRE>' );
	unlike( $ppd_html, qr{^\s*<REQUIRE NAME="warnings::" />}m, 'no <REQUIRE> for build_require' );

	my $archname = $Config{archname};
	if( $] >= 5.008 ) {
	# XXX This is a copy of the internal logic, so it's not a great test
	$archname .= "-$Config{PERL_REVISION}.$Config{PERL_VERSION}";
	}
	like( $ppd_html, qr{^\s*<ARCHITECTURE NAME="$archname" />}m,
	' <ARCHITECTURE>');
	like( $ppd_html, qr{^\s*<CODEBASE HREF="" />}m, ' <CODEBASE>');
	like( $ppd_html, qr{^\s*</IMPLEMENTATION>}m, ' </IMPLEMENTATION>');
	like( $ppd_html, qr{^\s*</SOFTPKG>}m, ' </SOFTPKG>');
	END { unlink 'Big-Dummy.ppd' }


	my $test_out = run("$make test");
	like( $test_out, qr/All tests successful/, 'make test' );
	is( $?, 0, ' exited normally' ) \|\|
	diag $test_out;

	# Test 'make test TEST_VERBOSE=1'
	my $make_test_verbose = make_macro($make, 'test', TEST_VERBOSE => 1);
	$test_out = run("$make_test_verbose");
	like( $test_out, qr/ok \d+ - TEST_VERBOSE/, 'TEST_VERBOSE' );
	like( $test_out, qr/All tests successful/, ' successful' );
	is( $?, 0, ' exited normally' ) \|\|
	diag $test_out;


	my $install_out = run("$make install");
	is( $?, 0, 'install' ) \|\| diag $install_out;
	like( $install_out, qr/^Installing /m );

	ok( -r '../dummy-install', ' install dir created' );
	my %files = ();
	find( sub {
	# do it case-insensitive for non-case preserving OSs
	my $file = lc $_;

	# VMS likes to put dots on the end of things that don't have them.
	$file =~ s/\.$// if $Is_VMS;

	$files{$file} = $File::Find::name;
	}, '../dummy-install' );
	ok( $files{'dummy.pm'}, ' Dummy.pm installed' );
	ok( $files{'liar.pm'}, ' Liar.pm installed' );
	ok( $files{'program'}, ' program installed' );
	ok( $files{'.packlist'}, ' packlist created' );
	ok( $files{'perllocal.pod'},' perllocal.pod created' );


	SKIP: {
	skip 'VMS install targets do not preserve $(PREFIX)', 8 if $Is_VMS;

	$install_out = run("$make install PREFIX=elsewhere");
	is( $?, 0, 'install with PREFIX override' ) \|\| diag $install_out;
	like( $install_out, qr/^Installing /m );

	ok( -r 'elsewhere', ' install dir created' );
	%files = ();
	find( sub { $files{$_} = $File::Find::name; }, 'elsewhere' );
	ok( $files{'Dummy.pm'}, ' Dummy.pm installed' );
	ok( $files{'Liar.pm'}, ' Liar.pm installed' );
	ok( $files{'program'}, ' program installed' );
	ok( $files{'.packlist'}, ' packlist created' );
	ok( $files{'perllocal.pod'},' perllocal.pod created' );
	rmtree('elsewhere');
	}


	SKIP: {
	skip 'VMS install targets do not preserve $(DESTDIR)', 10 if $Is_VMS;

	$install_out = run("$make install PREFIX= DESTDIR=other");
	is( $?, 0, 'install with DESTDIR' ) \|\|
	diag $install_out;
	like( $install_out, qr/^Installing /m );

	ok( -d 'other', ' destdir created' );
	%files = ();
	my $perllocal;
	find( sub {
	$files{$_} = $File::Find::name;
	}, 'other' );
	ok( $files{'Dummy.pm'}, ' Dummy.pm installed' );
	ok( $files{'Liar.pm'}, ' Liar.pm installed' );
	ok( $files{'program'}, ' program installed' );
	ok( $files{'.packlist'}, ' packlist created' );
	ok( $files{'perllocal.pod'},' perllocal.pod created' );

	ok( open(PERLLOCAL, $files{'perllocal.pod'} ) ) \|\|
	diag("Can't open $files{'perllocal.pod'}: $!");
	{ local $/;
	unlike(<PERLLOCAL>, qr/other/, 'DESTDIR should not appear in perllocal');
	}
	close PERLLOCAL;

	# TODO not available in the min version of Test::Harness we require
	# ok( open(PACKLIST, $files{'.packlist'} ) ) \|\|
	# diag("Can't open $files{'.packlist'}: $!");
	# { local $/;
	# local $TODO = 'DESTDIR still in .packlist';
	# unlike(<PACKLIST>, qr/other/, 'DESTDIR should not appear in .packlist');
	# }
	# close PACKLIST;

	rmtree('other');
	}


	SKIP: {
	skip 'VMS install targets do not preserve $(PREFIX)', 9 if $Is_VMS;

	$install_out = run("$make install PREFIX=elsewhere DESTDIR=other/");
	is( $?, 0, 'install with PREFIX override and DESTDIR' ) \|\|
	diag $install_out;
	like( $install_out, qr/^Installing /m );

	ok( !-d 'elsewhere', ' install dir not created' );
	ok( -d 'other/elsewhere', ' destdir created' );
	%files = ();
	find( sub { $files{$_} = $File::Find::name; }, 'other/elsewhere' );
	ok( $files{'Dummy.pm'}, ' Dummy.pm installed' );
	ok( $files{'Liar.pm'}, ' Liar.pm installed' );
	ok( $files{'program'}, ' program installed' );
	ok( $files{'.packlist'}, ' packlist created' );
	ok( $files{'perllocal.pod'},' perllocal.pod created' );
	rmtree('other');
	}


	my $dist_test_out = run("$make disttest");
	is( $?, 0, 'disttest' ) \|\| diag($dist_test_out);

	# Test META.yml generation
	use ExtUtils::Manifest qw(maniread);

	my $distdir = 'Big-Dummy-0.01';
	$distdir =~ s/\./_/g if $Is_VMS;
	my $meta_yml = "$distdir/META.yml";
	my $mymeta_yml = "$distdir/MYMETA.yml";
	my $meta_json = "$distdir/META.json";
	my $mymeta_json = "$distdir/MYMETA.json";

	note "META file validity"; {
	require CPAN::Meta;

	ok( !-f 'META.yml', 'META.yml not written to source dir' );
	ok( -f $meta_yml, 'META.yml written to dist dir' );
	ok( !-e "META_new.yml", 'temp META.yml file not left around' );

	ok( -f 'MYMETA.yml', 'MYMETA.yml is written to source dir' );
	ok( -f $mymeta_yml, 'MYMETA.yml is written to dist dir on disttest' );

	ok( !-f 'META.json', 'META.json not written to source dir' );
	ok( -f $meta_json, 'META.json written to dist dir' );
	ok( !-e "META_new.json", 'temp META.json file not left around' );

	ok( -f 'MYMETA.json', 'MYMETA.json is written to source dir' );
	ok( -f $mymeta_json, 'MYMETA.json is written to dist dir on disttest' );

	for my $case (
	['META.yml', $meta_yml],
	['MYMETA.yml', $mymeta_yml],
	['META.json', $meta_json],
	['MYMETA.json', $mymeta_json],
	['MYMETA.yml', 'MYMETA.yml'],
	['MYMETA.json', 'MYMETA.json'],
	) {
	my ($label, $meta_name) = @$case;
	ok(
	my $obj = eval {
	CPAN::Meta->load_file($meta_name, {lazy_validation => 0})
	},
	"$label validates"
	);
	my $is = sub {
	my ($m,$e) = @_;
	is($obj->$m, $e, "$label -> $m")
	};
	my $is_list = sub {
	my ($m,$e) = @_;
	is_deeply([$obj->$m], $e, "$label -> $m")
	};
	my $is_map = sub {
	my ($m,$e) = @_;
	is_deeply($obj->$m, $e, "$label -> $m")
	};
	$is->( name => "Big-Dummy" );
	$is->( version => "0.01" );
	$is->( abstract => q{Try "our" hot dog's, $andwiche$ and $(ub)$!} );
	$is_list->( licenses => [q{unknown}] );
	$is_list->( authors => [ q{Michael G Schwern <schwern@pobox.com>} ] );
	$is_map->( prereqs => {
	configure => {
	requires => {
	'ExtUtils::MakeMaker' => 0
	},
	},
	build => {
	requires => {
	'warnings' => 0
	}
	},
	runtime => {
	requires => {
	'strict' => 0
	}
	},
	}
	);
	$is_map->(
	no_index => {
	directory => [qw/t inc/],
	}
	);
	$is->( dynamic_config => ($label =~ /MYMETA/) ? 0 : 1 );
	}

	my $manifest = maniread("$distdir/MANIFEST");
	# VMS is non-case preserving, so we can't know what the MANIFEST will
	# look like. :(
	_normalize($manifest);
	is( $manifest->{'meta.yml'}, 'Module YAML meta-data (added by MakeMaker)',
	"MANIFEST has META.yml"
	);
	is( $manifest->{'meta.json'}, 'Module JSON meta-data (added by MakeMaker)',
	"MANFIEST has META.json"
	);

	# Test NO_META META.yml suppression
	for my $f ( $meta_yml, $meta_json, 'MYMETA.yml', 'MYMETA.json' ) {
	1 while unlink $f;
	}
	ok( !-f $meta_yml, 'META.yml deleted' );
	ok( !-f 'MYMETA.yml','MYMETA.yml deleted' );
	ok( !-f $meta_json, 'META.json deleted' );
	ok( !-f 'MYMETA.json','MYMETA.json deleted' );

	@mpl_out = run(qq{$perl Makefile.PL "NO_META=1"});
	ok( -f 'MYMETA.yml', 'MYMETA.yml generation not suppressed by NO_META' );
	ok( -f 'MYMETA.json', 'MYMETA.json generation not suppressed by NO_META' );
	cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) \|\| diag(@mpl_out);
	ok( !-f $meta_yml, 'META.yml generation suppressed by NO_META' );
	ok( !-f $meta_json, 'META.json generation suppressed by NO_META' );
	my $distdir_out = run("$make distdir");
	is( $?, 0, 'distdir' ) \|\| diag($distdir_out);
	ok( !-f $meta_yml, 'META.yml generation suppressed by NO_META' );
	ok( !-f $meta_json, 'META.json generation suppressed by NO_META' );

	for my $f ( 'MYMETA.yml', 'MYMETA.json' ) {
	1 while unlink $f;
	}
	ok( !-f 'MYMETA.yml','MYMETA.yml deleted' );
	ok( !-f 'MYMETA.json','MYMETA.json deleted' );

	@mpl_out = run(qq{$perl Makefile.PL "NO_MYMETA=1"});
	cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) \|\| diag(@mpl_out);
	$distdir_out = run("$make distdir");
	is( $?, 0, 'distdir' ) \|\| diag($distdir_out);
	ok( !-f 'MYMETA.yml','MYMETA.yml generation suppressed by NO_MYMETA' );
	ok( !-f 'MYMETA.json','MYMETA.json generation suppressed by NO_MYMETA' );
	ok( -f $meta_yml, 'META.yml generation not suppressed by NO_MYMETA' );
	ok( -f $meta_json, 'META.json generation not suppressed by NO_MYMETA' );

	# Test MYMETA really comes from META except for prereqs
	for my $f ( $meta_yml, $meta_json, 'MYMETA.yml', 'MYMETA.json' ) {
	1 while unlink $f;
	}
	@mpl_out = run(qq{$perl Makefile.PL});
	cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) \|\| diag(@mpl_out);
	$distdir_out = run("$make distdir");
	is( $?, 0, 'distdir' ) \|\| diag($distdir_out);
	ok( -f $meta_yml, 'META.yml generated in distdir' );
	ok( -f $meta_json, 'META.json generated in distdir' );
	ok( ! -f $mymeta_yml, 'MYMETA.yml not yet generated in distdir' );
	ok( ! -f $mymeta_json, 'MYMETA.json generated in distdir' );
	my $edit_meta = CPAN::Meta->load_file($meta_json)->as_struct;
	$edit_meta->{abstract} = "New abstract";
	my $meta_obj = CPAN::Meta->new($edit_meta);
	is( $meta_obj->abstract, "New abstract", "MYMETA abstract from META, not Makefile.PL");
	ok( $meta_obj->save($meta_json), "Saved edited META.json in distdir" );
	ok( $meta_obj->save($meta_yml, {version => 1.4}), "Saved edited META.yml in distdir");
	ok( chdir $distdir );
	ok( -f 'META.yml', 'META.yml confirmed in distdir' );
	ok( -f 'META.json', 'META.json confirmed in distdir' );
	@mpl_out = run(qq{$perl Makefile.PL});
	cmp_ok( $?, '==', 0, 'Makefile.PL in distdir exited with zero' ) \|\| diag(@mpl_out);
	ok( chdir File::Spec->updir );
	ok( -f $mymeta_yml, 'MYMETA.yml generated in distdir' );
	ok( -f $mymeta_json, 'MYMETA.json generated in distdir' );
	$meta_obj = CPAN::Meta->load_file($meta_json);
	is( $meta_obj->abstract, "New abstract", "META abstract is same as was saved");
	$meta_obj = CPAN::Meta->load_file($mymeta_json);
	is( $meta_obj->abstract, "New abstract", "MYMETA abstract from META, not Makefile.PL");
	}



	# Make sure init_dirscan doesn't go into the distdir
	@mpl_out = run(qq{$perl Makefile.PL "PREFIX=../dummy-install"});

	cmp_ok( $?, '==', 0, 'Makefile.PL exited with zero' ) \|\| diag(@mpl_out);

	ok( grep(/^Writing $makefile for Big::Dummy/, @mpl_out) == 1,
	'init_dirscan skipped distdir') \|\|
	diag(@mpl_out);

	# I know we'll get ignored errors from make here, that's ok.
	# Send STDERR off to oblivion.
	open(SAVERR, ">&STDERR") or die $!;
	open(STDERR, ">",File::Spec->devnull) or die $!;

	my $realclean_out = run("$make realclean");
	is( $?, 0, 'realclean' ) \|\| diag($realclean_out);

	open(STDERR, ">&SAVERR") or die $!;
	close SAVERR;


	sub _normalize {
	my $hash = shift;

	while(my($k,$v) = each %$hash) {
	delete $hash->{$k};
	$hash->{lc $k} = $v;
	}
	}