| /* |
| * Copyright 2000-2009 Sun Microsystems, Inc. All Rights Reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. Sun designates this |
| * particular file as subject to the "Classpath" exception as provided |
| * by Sun in the LICENSE file that accompanied this code. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, |
| * CA 95054 USA or visit www.sun.com if you need additional information or |
| * have any questions. |
| */ |
| |
| package org.ietf.jgss; |
| |
| import sun.security.jgss.spi.*; |
| import java.io.InputStream; |
| import java.io.OutputStream; |
| |
| /** |
| * This interface encapsulates the GSS-API security context and provides |
| * the security services that are available over the context. Security |
| * contexts are established between peers using locally acquired |
| * credentials. Multiple contexts may exist simultaneously between a pair |
| * of peers, using the same or different set of credentials. GSS-API |
| * functions in a manner independent of the underlying transport protocol |
| * and depends on its calling application to transport the tokens that are |
| * generated by the security context between the peers.<p> |
| * |
| * If the caller instantiates the context using the default |
| * <code>GSSManager</code> instance, then the Kerberos v5 GSS-API mechanism |
| * is guaranteed to be available for context establishment. This mechanism |
| * is identified by the Oid "1.2.840.113554.1.2.2" and is defined in RFC |
| * 1964.<p> |
| * |
| * Before the context establishment phase is initiated, the context |
| * initiator may request specific characteristics desired of the |
| * established context. Not all underlying mechanisms support all |
| * characteristics that a caller might desire. After the context is |
| * established, the caller can check the actual characteristics and services |
| * offered by that context by means of various query methods. When using |
| * the Kerberos v5 GSS-API mechanism offered by the default |
| * <code>GSSManager</code> instance, all optional services will be |
| * available locally. They are mutual authentication, credential |
| * delegation, confidentiality and integrity protection, and per-message |
| * replay detection and sequencing. Note that in the GSS-API, message integrity |
| * is a prerequisite for message confidentiality.<p> |
| * |
| * The context establishment occurs in a loop where the |
| * initiator calls {@link #initSecContext(byte[], int, int) initSecContext} |
| * and the acceptor calls {@link #acceptSecContext(byte[], int, int) |
| * acceptSecContext} until the context is established. While in this loop |
| * the <code>initSecContext</code> and <code>acceptSecContext</code> |
| * methods produce tokens that the application sends over to the peer. The |
| * peer passes any such token as input to its <code>acceptSecContext</code> |
| * or <code>initSecContext</code> as the case may be.<p> |
| * |
| * During the context establishment phase, the {@link |
| * #isProtReady() isProtReady} method may be called to determine if the |
| * context can be used for the per-message operations of {@link |
| * #wrap(byte[], int, int, MessageProp) wrap} and {@link #getMIC(byte[], |
| * int, int, MessageProp) getMIC}. This allows applications to use |
| * per-message operations on contexts which aren't yet fully |
| * established.<p> |
| * |
| * After the context has been established or the <code>isProtReady</code> |
| * method returns <code>true</code>, the query routines can be invoked to |
| * determine the actual characteristics and services of the established |
| * context. The application can also start using the per-message methods |
| * of {@link #wrap(byte[], int, int, MessageProp) wrap} and |
| * {@link #getMIC(byte[], int, int, MessageProp) getMIC} to obtain |
| * cryptographic operations on application supplied data.<p> |
| * |
| * When the context is no longer needed, the application should call |
| * {@link #dispose() dispose} to release any system resources the context |
| * may be using.<p> |
| * |
| * A security context typically maintains sequencing and replay detection |
| * information about the tokens it processes. Therefore, the sequence in |
| * which any tokens are presented to this context for processing can be |
| * important. Also note that none of the methods in this interface are |
| * synchronized. Therefore, it is not advisable to share a |
| * <code>GSSContext</code> among several threads unless some application |
| * level synchronization is in place.<p> |
| * |
| * Finally, different mechanism providers might place different security |
| * restrictions on using GSS-API contexts. These will be documented by the |
| * mechanism provider. The application will need to ensure that it has the |
| * appropriate permissions if such checks are made in the mechanism layer.<p> |
| * |
| * The example code presented below demonstrates the usage of the |
| * <code>GSSContext</code> interface for the initiating peer. Different |
| * operations on the <code>GSSContext</code> object are presented, |
| * including: object instantiation, setting of desired flags, context |
| * establishment, query of actual context flags, per-message operations on |
| * application data, and finally context deletion.<p> |
| * |
| * <pre> |
| * // Create a context using default credentials |
| * // and the implementation specific default mechanism |
| * GSSManager manager ... |
| * GSSName targetName ... |
| * GSSContext context = manager.createContext(targetName, null, null, |
| * GSSContext.INDEFINITE_LIFETIME); |
| * |
| * // set desired context options prior to context establishment |
| * context.requestConf(true); |
| * context.requestMutualAuth(true); |
| * context.requestReplayDet(true); |
| * context.requestSequenceDet(true); |
| * |
| * // establish a context between peers |
| * |
| * byte []inToken = new byte[0]; |
| * |
| * // Loop while there still is a token to be processed |
| * |
| * while (!context.isEstablished()) { |
| * |
| * byte[] outToken |
| * = context.initSecContext(inToken, 0, inToken.length); |
| * |
| * // send the output token if generated |
| * if (outToken != null) |
| * sendToken(outToken); |
| * |
| * if (!context.isEstablished()) { |
| * inToken = readToken(); |
| * } |
| * |
| * // display context information |
| * System.out.println("Remaining lifetime in seconds = " |
| * + context.getLifetime()); |
| * System.out.println("Context mechanism = " + context.getMech()); |
| * System.out.println("Initiator = " + context.getSrcName()); |
| * System.out.println("Acceptor = " + context.getTargName()); |
| * |
| * if (context.getConfState()) |
| * System.out.println("Confidentiality (i.e., privacy) is available"); |
| * |
| * if (context.getIntegState()) |
| * System.out.println("Integrity is available"); |
| * |
| * // perform wrap on an application supplied message, appMsg, |
| * // using QOP = 0, and requesting privacy service |
| * byte [] appMsg ... |
| * |
| * MessageProp mProp = new MessageProp(0, true); |
| * |
| * byte []tok = context.wrap(appMsg, 0, appMsg.length, mProp); |
| * |
| * sendToken(tok); |
| * |
| * // release the local-end of the context |
| * context.dispose(); |
| * |
| * </pre> |
| * |
| * @author Mayank Upadhyay |
| * @since 1.4 |
| */ |
| public interface GSSContext { |
| |
| /** |
| * A lifetime constant representing the default context lifetime. This |
| * value is set to 0. |
| */ |
| public static final int DEFAULT_LIFETIME = 0; |
| |
| /** |
| * A lifetime constant representing indefinite context lifetime. |
| * This value must is set to the maximum integer value in Java - |
| * {@link java.lang.Integer#MAX_VALUE Integer.MAX_VALUE}. |
| */ |
| public static final int INDEFINITE_LIFETIME = Integer.MAX_VALUE; |
| |
| /** |
| * Called by the context initiator to start the context creation |
| * phase and process any tokens generated |
| * by the peer's <code>acceptSecContext</code> method. |
| * This method may return an output token which the application will need |
| * to send to the peer for processing by its <code>acceptSecContext</code> |
| * method. The application can call {@link #isEstablished() |
| * isEstablished} to determine if the context establishment phase is |
| * complete on this side of the context. A return value of |
| * <code>false</code> from <code>isEstablished</code> indicates that |
| * more tokens are expected to be supplied to |
| * <code>initSecContext</code>. Upon completion of the context |
| * establishment, the available context options may be queried through |
| * the get methods.<p> |
| * |
| * Note that it is possible that the <code>initSecContext</code> method |
| * return a token for the peer, and <code>isEstablished</code> return |
| * <code>true</code> also. This indicates that the token needs to be sent |
| * to the peer, but the local end of the context is now fully |
| * established.<p> |
| * |
| * Some mechanism providers might require that the caller be granted |
| * permission to initiate a security context. A failed permission check |
| * might cause a {@link java.lang.SecurityException SecurityException} |
| * to be thrown from this method.<p> |
| * |
| * @return a byte[] containing the token to be sent to the |
| * peer. <code>null</code> indicates that no token is generated. |
| * @param inputBuf token generated by the peer. This parameter is ignored |
| * on the first call since no token has been received from the peer. |
| * @param offset the offset within the inputBuf where the token begins. |
| * @param len the length of the token. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#DEFECTIVE_TOKEN GSSException.DEFECTIVE_TOKEN}, |
| * {@link GSSException#BAD_MIC GSSException.BAD_MIC}, |
| * {@link GSSException#NO_CRED GSSException.NO_CRED}, |
| * {@link GSSException#CREDENTIALS_EXPIRED |
| * GSSException.CREDENTIALS_EXPIRED}, |
| * {@link GSSException#BAD_BINDINGS GSSException.BAD_BINDINGS}, |
| * {@link GSSException#OLD_TOKEN GSSException.OLD_TOKEN}, |
| * {@link GSSException#DUPLICATE_TOKEN GSSException.DUPLICATE_TOKEN}, |
| * {@link GSSException#BAD_NAMETYPE GSSException.BAD_NAMETYPE}, |
| * {@link GSSException#BAD_MECH GSSException.BAD_MECH}, |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public byte[] initSecContext(byte inputBuf[], int offset, int len) |
| throws GSSException; |
| |
| /** |
| * Called by the context initiator to start the context creation |
| * phase and process any tokens generated |
| * by the peer's <code>acceptSecContext</code> method using |
| * streams. This method may write an output token to the |
| * <code>OutpuStream</code>, which the application will |
| * need to send to the peer for processing by its |
| * <code>acceptSecContext</code> call. Typically, the application would |
| * ensure this by calling the {@link java.io.OutputStream#flush() flush} |
| * method on an <code>OutputStream</code> that encapsulates the |
| * connection between the two peers. The application can |
| * determine if a token is written to the OutputStream from the return |
| * value of this method. A return value of <code>0</code> indicates that |
| * no token was written. The application can call |
| * {@link #isEstablished() isEstablished} to determine if the context |
| * establishment phase is complete on this side of the context. A |
| * return value of <code>false</code> from <code>isEstablished</code> |
| * indicates that more tokens are expected to be supplied to |
| * <code>initSecContext</code>. |
| * Upon completion of the context establishment, the available context |
| * options may be queried through the get methods.<p> |
| * |
| * Note that it is possible that the <code>initSecContext</code> method |
| * return a token for the peer, and <code>isEstablished</code> return |
| * <code>true</code> also. This indicates that the token needs to be sent |
| * to the peer, but the local end of the context is now fully |
| * established.<p> |
| * |
| * The GSS-API authentication tokens contain a definitive start and |
| * end. This method will attempt to read one of these tokens per |
| * invocation, and may block on the stream if only part of the token is |
| * available. In all other respects this method is equivalent to the |
| * byte array based {@link #initSecContext(byte[], int, int) |
| * initSecContext}.<p> |
| * |
| * Some mechanism providers might require that the caller be granted |
| * permission to initiate a security context. A failed permission check |
| * might cause a {@link java.lang.SecurityException SecurityException} |
| * to be thrown from this method.<p> |
| * |
| * The following example code demonstrates how this method might be |
| * used:<p> |
| * <pre> |
| * InputStream is ... |
| * OutputStream os ... |
| * GSSContext context ... |
| * |
| * // Loop while there is still a token to be processed |
| * |
| * while (!context.isEstablished()) { |
| * |
| * context.initSecContext(is, os); |
| * |
| * // send output token if generated |
| * os.flush(); |
| * } |
| * </pre> |
| * |
| * |
| * @return the number of bytes written to the OutputStream as part of the |
| * token to be sent to the peer. A value of 0 indicates that no token |
| * needs to be sent. |
| * @param inStream an InputStream that contains the token generated by |
| * the peer. This parameter is ignored on the first call since no token |
| * has been or will be received from the peer at that point. |
| * @param outStream an OutputStream where the output token will be |
| * written. During the final stage of context establishment, there may be |
| * no bytes written. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#DEFECTIVE_TOKEN GSSException.DEFECTIVE_TOKEN}, |
| * {@link GSSException#BAD_MIC GSSException.BAD_MIC}, |
| * {@link GSSException#NO_CRED GSSException.NO_CRED}, |
| * {@link GSSException#CREDENTIALS_EXPIRED GSSException.CREDENTIALS_EXPIRED}, |
| * {@link GSSException#BAD_BINDINGS GSSException.BAD_BINDINGS}, |
| * {@link GSSException#OLD_TOKEN GSSException.OLD_TOKEN}, |
| * {@link GSSException#DUPLICATE_TOKEN GSSException.DUPLICATE_TOKEN}, |
| * {@link GSSException#BAD_NAMETYPE GSSException.BAD_NAMETYPE}, |
| * {@link GSSException#BAD_MECH GSSException.BAD_MECH}, |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public int initSecContext(InputStream inStream, |
| OutputStream outStream) throws GSSException; |
| |
| /** |
| * Called by the context acceptor upon receiving a token from the |
| * peer. This method may return an output token which the application |
| * will need to send to the peer for further processing by its |
| * <code>initSecContext</code> call.<p> |
| * |
| * The application can call {@link #isEstablished() isEstablished} to |
| * determine if the context establishment phase is complete for this |
| * peer. A return value of <code>false</code> from |
| * <code>isEstablished</code> indicates that more tokens are expected to |
| * be supplied to this method. Upon completion of the context |
| * establishment, the available context options may be queried through |
| * the get methods.<p> |
| * |
| * Note that it is possible that <code>acceptSecContext</code> return a |
| * token for the peer, and <code>isEstablished</code> return |
| * <code>true</code> also. This indicates that the token needs to be |
| * sent to the peer, but the local end of the context is now fully |
| * established.<p> |
| * |
| * Some mechanism providers might require that the caller be granted |
| * permission to accept a security context. A failed permission check |
| * might cause a {@link java.lang.SecurityException SecurityException} |
| * to be thrown from this method.<p> |
| * |
| * The following example code demonstrates how this method might be |
| * used:<p> |
| * <pre> |
| * byte[] inToken; |
| * byte[] outToken; |
| * GSSContext context ... |
| * |
| * // Loop while there is still a token to be processed |
| * |
| * while (!context.isEstablished()) { |
| * inToken = readToken(); |
| * outToken = context.acceptSecContext(inToken, 0, |
| * inToken.length); |
| * // send output token if generated |
| * if (outToken != null) |
| * sendToken(outToken); |
| * } |
| * </pre> |
| * |
| * |
| * @return a byte[] containing the token to be sent to the |
| * peer. <code>null</code> indicates that no token is generated. |
| * @param inToken token generated by the peer. |
| * @param offset the offset within the inToken where the token begins. |
| * @param len the length of the token. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#DEFECTIVE_TOKEN GSSException.DEFECTIVE_TOKEN}, |
| * {@link GSSException#BAD_MIC GSSException.BAD_MIC}, |
| * {@link GSSException#NO_CRED GSSException.NO_CRED}, |
| * {@link GSSException#CREDENTIALS_EXPIRED |
| * GSSException.CREDENTIALS_EXPIRED}, |
| * {@link GSSException#BAD_BINDINGS GSSException.BAD_BINDINGS}, |
| * {@link GSSException#OLD_TOKEN GSSException.OLD_TOKEN}, |
| * {@link GSSException#DUPLICATE_TOKEN GSSException.DUPLICATE_TOKEN}, |
| * {@link GSSException#BAD_MECH GSSException.BAD_MECH}, |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public byte[] acceptSecContext(byte inToken[], int offset, int len) |
| throws GSSException; |
| |
| /** |
| * Called by the context acceptor to process a token from the peer using |
| * streams. It may write an output token to the |
| * <code>OutputStream</code>, which the application |
| * will need to send to the peer for processing by its |
| * <code>initSecContext</code> method. Typically, the application would |
| * ensure this by calling the {@link java.io.OutputStream#flush() flush} |
| * method on an <code>OutputStream</code> that encapsulates the |
| * connection between the two peers. The application can call |
| * {@link #isEstablished() isEstablished} to determine if the context |
| * establishment phase is complete on this side of the context. A |
| * return value of <code>false</code> from <code>isEstablished</code> |
| * indicates that more tokens are expected to be supplied to |
| * <code>acceptSecContext</code>. |
| * Upon completion of the context establishment, the available context |
| * options may be queried through the get methods.<p> |
| * |
| * Note that it is possible that <code>acceptSecContext</code> return a |
| * token for the peer, and <code>isEstablished</code> return |
| * <code>true</code> also. This indicates that the token needs to be |
| * sent to the peer, but the local end of the context is now fully |
| * established.<p> |
| * |
| * The GSS-API authentication tokens contain a definitive start and |
| * end. This method will attempt to read one of these tokens per |
| * invocation, and may block on the stream if only part of the token is |
| * available. In all other respects this method is equivalent to the byte |
| * array based {@link #acceptSecContext(byte[], int, int) |
| * acceptSecContext}.<p> |
| * |
| * Some mechanism providers might require that the caller be granted |
| * permission to accept a security context. A failed permission check |
| * might cause a {@link java.lang.SecurityException SecurityException} |
| * to be thrown from this method.<p> |
| * |
| * The following example code demonstrates how this method might be |
| * used:<p> |
| * <pre> |
| * InputStream is ... |
| * OutputStream os ... |
| * GSSContext context ... |
| * |
| * // Loop while there is still a token to be processed |
| * |
| * while (!context.isEstablished()) { |
| * |
| * context.acceptSecContext(is, os); |
| * |
| * // send output token if generated |
| * os.flush(); |
| * } |
| * </pre> |
| * |
| * |
| * @param inStream an InputStream that contains the token generated by |
| * the peer. |
| * @param outStream an OutputStream where the output token will be |
| * written. During the final stage of context establishment, there may be |
| * no bytes written. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#DEFECTIVE_TOKEN GSSException.DEFECTIVE_TOKEN}, |
| * {@link GSSException#BAD_MIC GSSException.BAD_MIC}, |
| * {@link GSSException#NO_CRED GSSException.NO_CRED}, |
| * {@link GSSException#CREDENTIALS_EXPIRED |
| * GSSException.CREDENTIALS_EXPIRED}, |
| * {@link GSSException#BAD_BINDINGS GSSException.BAD_BINDINGS}, |
| * {@link GSSException#OLD_TOKEN GSSException.OLD_TOKEN}, |
| * {@link GSSException#DUPLICATE_TOKEN GSSException.DUPLICATE_TOKEN}, |
| * {@link GSSException#BAD_MECH GSSException.BAD_MECH}, |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| /* Missing return value in RFC. int should have been returned. |
| * ----------------------------------------------------------- |
| * |
| * The application can determine if a token is written to the |
| * OutputStream from the return value of this method. A return value of |
| * <code>0</code> indicates that no token was written. |
| * |
| * @return <strong>the number of bytes written to the |
| * OutputStream as part of the token to be sent to the peer. A value of |
| * 0 indicates that no token needs to be |
| * sent.</strong> |
| */ |
| public void acceptSecContext(InputStream inStream, |
| OutputStream outStream) throws GSSException; |
| |
| /** |
| * Used during context establishment to determine the state of the |
| * context. |
| * |
| * @return <code>true</code> if this is a fully established context on |
| * the caller's side and no more tokens are needed from the peer. |
| */ |
| public boolean isEstablished(); |
| |
| /** |
| * Releases any system resources and cryptographic information stored in |
| * the context object and invalidates the context. |
| * |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public void dispose() throws GSSException; |
| |
| /** |
| * Used to determine limits on the size of the message |
| * that can be passed to <code>wrap</code>. Returns the maximum |
| * message size that, if presented to the <code>wrap</code> method with |
| * the same <code>confReq</code> and <code>qop</code> parameters, will |
| * result in an output token containing no more |
| * than <code>maxTokenSize</code> bytes.<p> |
| * |
| * This call is intended for use by applications that communicate over |
| * protocols that impose a maximum message size. It enables the |
| * application to fragment messages prior to applying protection.<p> |
| * |
| * GSS-API implementations are recommended but not required to detect |
| * invalid QOP values when <code>getWrapSizeLimit</code> is called. |
| * This routine guarantees only a maximum message size, not the |
| * availability of specific QOP values for message protection.<p> |
| * |
| * @param qop the level of protection wrap will be asked to provide. |
| * @param confReq <code>true</code> if wrap will be asked to provide |
| * privacy, <code>false</code> otherwise. |
| * @param maxTokenSize the desired maximum size of the token emitted by |
| * wrap. |
| * @return the maximum size of the input token for the given output |
| * token size |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#CONTEXT_EXPIRED GSSException.CONTEXT_EXPIRED}, |
| * {@link GSSException#BAD_QOP GSSException.BAD_QOP}, |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public int getWrapSizeLimit(int qop, boolean confReq, |
| int maxTokenSize) throws GSSException; |
| |
| /** |
| * Applies per-message security services over the established security |
| * context. The method will return a token with the |
| * application supplied data and a cryptographic MIC over it. |
| * The data may be encrypted if confidentiality (privacy) was |
| * requested.<p> |
| * |
| * The MessageProp object is instantiated by the application and used |
| * to specify a QOP value which selects cryptographic algorithms, and a |
| * privacy service to optionally encrypt the message. The underlying |
| * mechanism that is used in the call may not be able to provide the |
| * privacy service. It sets the actual privacy service that it does |
| * provide in this MessageProp object which the caller should then |
| * query upon return. If the mechanism is not able to provide the |
| * requested QOP, it throws a GSSException with the BAD_QOP code.<p> |
| * |
| * Since some application-level protocols may wish to use tokens |
| * emitted by wrap to provide "secure framing", implementations should |
| * support the wrapping of zero-length messages.<p> |
| * |
| * The application will be responsible for sending the token to the |
| * peer. |
| * |
| * @param inBuf application data to be protected. |
| * @param offset the offset within the inBuf where the data begins. |
| * @param len the length of the data |
| * @param msgProp instance of MessageProp that is used by the |
| * application to set the desired QOP and privacy state. Set the |
| * desired QOP to 0 to request the default QOP. Upon return from this |
| * method, this object will contain the the actual privacy state that |
| * was applied to the message by the underlying mechanism. |
| * @return a byte[] containing the token to be sent to the peer. |
| * |
| * @throws GSSException containing the following major error codes: |
| * {@link GSSException#CONTEXT_EXPIRED GSSException.CONTEXT_EXPIRED}, |
| * {@link GSSException#BAD_QOP GSSException.BAD_QOP}, |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public byte[] wrap(byte inBuf[], int offset, int len, |
| MessageProp msgProp) throws GSSException; |
| |
| /** |
| * Applies per-message security services over the established security |
| * context using streams. The method will return a |
| * token with the application supplied data and a cryptographic MIC over it. |
| * The data may be encrypted if confidentiality |
| * (privacy) was requested. This method is equivalent to the byte array |
| * based {@link #wrap(byte[], int, int, MessageProp) wrap} method.<p> |
| * |
| * The application will be responsible for sending the token to the |
| * peer. Typically, the application would |
| * ensure this by calling the {@link java.io.OutputStream#flush() flush} |
| * method on an <code>OutputStream</code> that encapsulates the |
| * connection between the two peers.<p> |
| * |
| * The MessageProp object is instantiated by the application and used |
| * to specify a QOP value which selects cryptographic algorithms, and a |
| * privacy service to optionally encrypt the message. The underlying |
| * mechanism that is used in the call may not be able to provide the |
| * privacy service. It sets the actual privacy service that it does |
| * provide in this MessageProp object which the caller should then |
| * query upon return. If the mechanism is not able to provide the |
| * requested QOP, it throws a GSSException with the BAD_QOP code.<p> |
| * |
| * Since some application-level protocols may wish to use tokens |
| * emitted by wrap to provide "secure framing", implementations should |
| * support the wrapping of zero-length messages.<p> |
| * |
| * @param inStream an InputStream containing the application data to be |
| * protected. All of the data that is available in |
| * inStream is used. |
| * @param outStream an OutputStream to write the protected message |
| * to. |
| * @param msgProp instance of MessageProp that is used by the |
| * application to set the desired QOP and privacy state. Set the |
| * desired QOP to 0 to request the default QOP. Upon return from this |
| * method, this object will contain the the actual privacy state that |
| * was applied to the message by the underlying mechanism. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#CONTEXT_EXPIRED GSSException.CONTEXT_EXPIRED}, |
| * {@link GSSException#BAD_QOP GSSException.BAD_QOP}, |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public void wrap(InputStream inStream, OutputStream outStream, |
| MessageProp msgProp) throws GSSException; |
| |
| /** |
| * Used to process tokens generated by the <code>wrap</code> method on |
| * the other side of the context. The method will return the message |
| * supplied by the peer application to its wrap call, while at the same |
| * time verifying the embedded MIC for that message.<p> |
| * |
| * The MessageProp object is instantiated by the application and is |
| * used by the underlying mechanism to return information to the caller |
| * such as the QOP, whether confidentiality was applied to the message, |
| * and other supplementary message state information.<p> |
| * |
| * Since some application-level protocols may wish to use tokens |
| * emitted by wrap to provide "secure framing", implementations should |
| * support the wrapping and unwrapping of zero-length messages.<p> |
| * |
| * @param inBuf a byte array containing the wrap token received from |
| * peer. |
| * @param offset the offset where the token begins. |
| * @param len the length of the token |
| * @param msgProp upon return from the method, this object will contain |
| * the applied QOP, the privacy state of the message, and supplementary |
| * information stating if the token was a duplicate, old, out of |
| * sequence or arriving after a gap. |
| * @return a byte[] containing the message unwrapped from the input |
| * token. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#DEFECTIVE_TOKEN GSSException.DEFECTIVE_TOKEN}, |
| * {@link GSSException#BAD_MIC GSSException.BAD_MIC}, |
| * {@link GSSException#CONTEXT_EXPIRED GSSException.CONTEXT_EXPIRED}, |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public byte [] unwrap(byte[] inBuf, int offset, int len, |
| MessageProp msgProp) throws GSSException; |
| |
| /** |
| * Uses streams to process tokens generated by the <code>wrap</code> |
| * method on the other side of the context. The method will return the |
| * message supplied by the peer application to its wrap call, while at |
| * the same time verifying the embedded MIC for that message.<p> |
| * |
| * The MessageProp object is instantiated by the application and is |
| * used by the underlying mechanism to return information to the caller |
| * such as the QOP, whether confidentiality was applied to the message, |
| * and other supplementary message state information.<p> |
| * |
| * Since some application-level protocols may wish to use tokens |
| * emitted by wrap to provide "secure framing", implementations should |
| * support the wrapping and unwrapping of zero-length messages.<p> |
| * |
| * The format of the input token that this method |
| * reads is defined in the specification for the underlying mechanism that |
| * will be used. This method will attempt to read one of these tokens per |
| * invocation. If the mechanism token contains a definitive start and |
| * end this method may block on the <code>InputStream</code> if only |
| * part of the token is available. If the start and end of the token |
| * are not definitive then the method will attempt to treat all |
| * available bytes as part of the token.<p> |
| * |
| * Other than the possible blocking behavior described above, this |
| * method is equivalent to the byte array based {@link #unwrap(byte[], |
| * int, int, MessageProp) unwrap} method.<p> |
| * |
| * @param inStream an InputStream that contains the wrap token generated |
| * by the peer. |
| * @param outStream an OutputStream to write the application message |
| * to. |
| * @param msgProp upon return from the method, this object will contain |
| * the applied QOP, the privacy state of the message, and supplementary |
| * information stating if the token was a duplicate, old, out of |
| * sequence or arriving after a gap. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#DEFECTIVE_TOKEN GSSException.DEFECTIVE_TOKEN}, |
| * {@link GSSException#BAD_MIC GSSException.BAD_MIC}, |
| * {@link GSSException#CONTEXT_EXPIRED GSSException.CONTEXT_EXPIRED}, |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public void unwrap(InputStream inStream, OutputStream outStream, |
| MessageProp msgProp) throws GSSException; |
| |
| /** |
| * Returns a token containing a cryptographic Message Integrity Code |
| * (MIC) for the supplied message, for transfer to the peer |
| * application. Unlike wrap, which encapsulates the user message in the |
| * returned token, only the message MIC is returned in the output |
| * token.<p> |
| * |
| * Note that privacy can only be applied through the wrap call.<p> |
| * |
| * Since some application-level protocols may wish to use tokens emitted |
| * by getMIC to provide "secure framing", implementations should support |
| * derivation of MICs from zero-length messages. |
| * |
| * @param inMsg the message to generate the MIC over. |
| * @param offset offset within the inMsg where the message begins. |
| * @param len the length of the message |
| * @param msgProp an instance of <code>MessageProp</code> that is used |
| * by the application to set the desired QOP. Set the desired QOP to |
| * <code>0</code> in <code>msgProp</code> to request the default |
| * QOP. Alternatively pass in <code>null</code> for <code>msgProp</code> |
| * to request the default QOP. |
| * @return a byte[] containing the token to be sent to the peer. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#CONTEXT_EXPIRED GSSException.CONTEXT_EXPIRED}, |
| * {@link GSSException#BAD_QOP GSSException.BAD_QOP}, |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public byte[] getMIC(byte []inMsg, int offset, int len, |
| MessageProp msgProp) throws GSSException; |
| |
| /** |
| * Uses streams to produce a token containing a cryptographic MIC for |
| * the supplied message, for transfer to the peer application. |
| * Unlike wrap, which encapsulates the user message in the returned |
| * token, only the message MIC is produced in the output token. This |
| * method is equivalent to the byte array based {@link #getMIC(byte[], |
| * int, int, MessageProp) getMIC} method. |
| * |
| * Note that privacy can only be applied through the wrap call.<p> |
| * |
| * Since some application-level protocols may wish to use tokens emitted |
| * by getMIC to provide "secure framing", implementations should support |
| * derivation of MICs from zero-length messages. |
| * |
| * @param inStream an InputStream containing the message to generate the |
| * MIC over. All of the data that is available in |
| * inStream is used. |
| * @param outStream an OutputStream to write the output token to. |
| * @param msgProp an instance of <code>MessageProp</code> that is used |
| * by the application to set the desired QOP. Set the desired QOP to |
| * <code>0</code> in <code>msgProp</code> to request the default |
| * QOP. Alternatively pass in <code>null</code> for <code>msgProp</code> |
| * to request the default QOP. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#CONTEXT_EXPIRED GSSException.CONTEXT_EXPIRED}, |
| * {@link GSSException#BAD_QOP GSSException.BAD_QOP}, |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public void getMIC(InputStream inStream, OutputStream outStream, |
| MessageProp msgProp) throws GSSException; |
| |
| /** |
| * Verifies the cryptographic MIC, contained in the token parameter, |
| * over the supplied message.<p> |
| * |
| * The MessageProp object is instantiated by the application and is used |
| * by the underlying mechanism to return information to the caller such |
| * as the QOP indicating the strength of protection that was applied to |
| * the message and other supplementary message state information.<p> |
| * |
| * Since some application-level protocols may wish to use tokens emitted |
| * by getMIC to provide "secure framing", implementations should support |
| * the calculation and verification of MICs over zero-length messages. |
| * |
| * @param inToken the token generated by peer's getMIC method. |
| * @param tokOffset the offset within the inToken where the token |
| * begins. |
| * @param tokLen the length of the token. |
| * @param inMsg the application message to verify the cryptographic MIC |
| * over. |
| * @param msgOffset the offset in inMsg where the message begins. |
| * @param msgLen the length of the message. |
| * @param msgProp upon return from the method, this object will contain |
| * the applied QOP and supplementary information stating if the token |
| * was a duplicate, old, out of sequence or arriving after a gap. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#DEFECTIVE_TOKEN GSSException.DEFECTIVE_TOKEN} |
| * {@link GSSException#BAD_MIC GSSException.BAD_MIC} |
| * {@link GSSException#CONTEXT_EXPIRED GSSException.CONTEXT_EXPIRED} |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public void verifyMIC(byte[] inToken, int tokOffset, int tokLen, |
| byte[] inMsg, int msgOffset, int msgLen, |
| MessageProp msgProp) throws GSSException; |
| |
| /** |
| * Uses streams to verify the cryptographic MIC, contained in the token |
| * parameter, over the supplied message. This method is equivalent to |
| * the byte array based {@link #verifyMIC(byte[], int, int, byte[], int, |
| * int, MessageProp) verifyMIC} method. |
| * |
| * The MessageProp object is instantiated by the application and is used |
| * by the underlying mechanism to return information to the caller such |
| * as the QOP indicating the strength of protection that was applied to |
| * the message and other supplementary message state information.<p> |
| * |
| * Since some application-level protocols may wish to use tokens emitted |
| * by getMIC to provide "secure framing", implementations should support |
| * the calculation and verification of MICs over zero-length messages.<p> |
| * |
| * The format of the input token that this method |
| * reads is defined in the specification for the underlying mechanism that |
| * will be used. This method will attempt to read one of these tokens per |
| * invocation. If the mechanism token contains a definitive start and |
| * end this method may block on the <code>InputStream</code> if only |
| * part of the token is available. If the start and end of the token |
| * are not definitive then the method will attempt to treat all |
| * available bytes as part of the token.<p> |
| * |
| * Other than the possible blocking behavior described above, this |
| * method is equivalent to the byte array based {@link #verifyMIC(byte[], |
| * int, int, byte[], int, int, MessageProp) verifyMIC} method.<p> |
| * |
| * @param tokStream an InputStream containing the token generated by the |
| * peer's getMIC method. |
| * @param msgStream an InputStream containing the application message to |
| * verify the cryptographic MIC over. All of the data |
| * that is available in msgStream is used. |
| * @param msgProp upon return from the method, this object will contain |
| * the applied QOP and supplementary information stating if the token |
| * was a duplicate, old, out of sequence or arriving after a gap. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#DEFECTIVE_TOKEN GSSException.DEFECTIVE_TOKEN} |
| * {@link GSSException#BAD_MIC GSSException.BAD_MIC} |
| * {@link GSSException#CONTEXT_EXPIRED GSSException.CONTEXT_EXPIRED} |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public void verifyMIC(InputStream tokStream, InputStream msgStream, |
| MessageProp msgProp) throws GSSException; |
| |
| /** |
| * Exports this context so that another process may |
| * import it.. Provided to support the sharing of work between |
| * multiple processes. This routine will typically be used by the |
| * context-acceptor, in an application where a single process receives |
| * incoming connection requests and accepts security contexts over |
| * them, then passes the established context to one or more other |
| * processes for message exchange.<p> |
| * |
| * This method deactivates the security context and creates an |
| * interprocess token which, when passed to {@link |
| * GSSManager#createContext(byte[]) GSSManager.createContext} in |
| * another process, will re-activate the context in the second process. |
| * Only a single instantiation of a given context may be active at any |
| * one time; a subsequent attempt by a context exporter to access the |
| * exported security context will fail.<p> |
| * |
| * The implementation may constrain the set of processes by which the |
| * interprocess token may be imported, either as a function of local |
| * security policy, or as a result of implementation decisions. For |
| * example, some implementations may constrain contexts to be passed |
| * only between processes that run under the same account, or which are |
| * part of the same process group.<p> |
| * |
| * The interprocess token may contain security-sensitive information |
| * (for example cryptographic keys). While mechanisms are encouraged |
| * to either avoid placing such sensitive information within |
| * interprocess tokens, or to encrypt the token before returning it to |
| * the application, in a typical GSS-API implementation this may not be |
| * possible. Thus the application must take care to protect the |
| * interprocess token, and ensure that any process to which the token |
| * is transferred is trustworthy. <p> |
| * |
| * Implementations are not required to support the inter-process |
| * transfer of security contexts. Calling the {@link #isTransferable() |
| * isTransferable} method will indicate if the context object is |
| * transferable.<p> |
| * |
| * Calling this method on a context that |
| * is not exportable will result in this exception being thrown with |
| * the error code {@link GSSException#UNAVAILABLE |
| * GSSException.UNAVAILABLE}. |
| * |
| * @return a byte[] containing the exported context |
| * @see GSSManager#createContext(byte[]) |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#UNAVAILABLE GSSException.UNAVAILABLE}, |
| * {@link GSSException#CONTEXT_EXPIRED GSSException.CONTEXT_EXPIRED}, |
| * {@link GSSException#NO_CONTEXT GSSException.NO_CONTEXT}, |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public byte [] export() throws GSSException; |
| |
| /** |
| * Requests that mutual authentication be done during |
| * context establishment. This request can only be made on the context |
| * initiator's side and it has to be done prior to the first call to |
| * <code>initSecContext</code>.<p> |
| * |
| * Not all mechanisms support mutual authentication and some mechanisms |
| * might require mutual authentication even if the application |
| * doesn't. Therefore, the application should check to see if the |
| * request was honored with the {@link #getMutualAuthState() |
| * getMutualAuthState} method.<p> |
| * |
| * @param state a boolean value indicating whether mutual |
| * authentication should be used or not. |
| * @see #getMutualAuthState() |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public void requestMutualAuth(boolean state) throws GSSException; |
| |
| /** |
| * Requests that replay detection be enabled for the |
| * per-message security services after context establishment. This |
| * request can only be made on the context initiator's side and it has |
| * to be done prior to the first call to |
| * <code>initSecContext</code>. During context establishment replay |
| * detection is not an option and is a function of the underlying |
| * mechanism's capabilities.<p> |
| * |
| * Not all mechanisms support replay detection and some mechanisms |
| * might require replay detection even if the application |
| * doesn't. Therefore, the application should check to see if the |
| * request was honored with the {@link #getReplayDetState() |
| * getReplayDetState} method. If replay detection is enabled then the |
| * {@link MessageProp#isDuplicateToken() MessageProp.isDuplicateToken} and {@link |
| * MessageProp#isOldToken() MessageProp.isOldToken} methods will return |
| * valid results for the <code>MessageProp</code> object that is passed |
| * in to the <code>unwrap</code> method or the <code>verifyMIC</code> |
| * method.<p> |
| * |
| * @param state a boolean value indicating whether replay detection |
| * should be enabled over the established context or not. |
| * @see #getReplayDetState() |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public void requestReplayDet(boolean state) throws GSSException; |
| |
| /** |
| * Requests that sequence checking be enabled for the |
| * per-message security services after context establishment. This |
| * request can only be made on the context initiator's side and it has |
| * to be done prior to the first call to |
| * <code>initSecContext</code>. During context establishment sequence |
| * checking is not an option and is a function of the underlying |
| * mechanism's capabilities.<p> |
| * |
| * Not all mechanisms support sequence checking and some mechanisms |
| * might require sequence checking even if the application |
| * doesn't. Therefore, the application should check to see if the |
| * request was honored with the {@link #getSequenceDetState() |
| * getSequenceDetState} method. If sequence checking is enabled then the |
| * {@link MessageProp#isDuplicateToken() MessageProp.isDuplicateToken}, |
| * {@link MessageProp#isOldToken() MessageProp.isOldToken}, |
| * {@link MessageProp#isUnseqToken() MessageProp.isUnseqToken}, and |
| * {@link MessageProp#isGapToken() MessageProp.isGapToken} methods will return |
| * valid results for the <code>MessageProp</code> object that is passed |
| * in to the <code>unwrap</code> method or the <code>verifyMIC</code> |
| * method.<p> |
| * |
| * @param state a boolean value indicating whether sequence checking |
| * should be enabled over the established context or not. |
| * @see #getSequenceDetState() |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public void requestSequenceDet(boolean state) throws GSSException; |
| |
| /** |
| * Requests that the initiator's credentials be |
| * delegated to the acceptor during context establishment. This |
| * request can only be made on the context initiator's side and it has |
| * to be done prior to the first call to |
| * <code>initSecContext</code>. |
| * |
| * Not all mechanisms support credential delegation. Therefore, an |
| * application that desires delegation should check to see if the |
| * request was honored with the {@link #getCredDelegState() |
| * getCredDelegState} method. If the application indicates that |
| * delegation must not be used, then the mechanism will honor the |
| * request and delegation will not occur. This is an exception |
| * to the general rule that a mechanism may enable a service even if it |
| * is not requested.<p> |
| * |
| * @param state a boolean value indicating whether the credentials |
| * should be delegated or not. |
| * @see #getCredDelegState() |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public void requestCredDeleg(boolean state) throws GSSException; |
| |
| /** |
| * Requests that the initiator's identity not be |
| * disclosed to the acceptor. This request can only be made on the |
| * context initiator's side and it has to be done prior to the first |
| * call to <code>initSecContext</code>. |
| * |
| * Not all mechanisms support anonymity for the initiator. Therefore, the |
| * application should check to see if the request was honored with the |
| * {@link #getAnonymityState() getAnonymityState} method.<p> |
| * |
| * @param state a boolean value indicating if the initiator should |
| * be authenticated to the acceptor as an anonymous principal. |
| * @see #getAnonymityState |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public void requestAnonymity(boolean state) throws GSSException; |
| |
| /** |
| * Requests that data confidentiality be enabled |
| * for the <code>wrap</code> method. This request can only be made on |
| * the context initiator's side and it has to be done prior to the |
| * first call to <code>initSecContext</code>. |
| * |
| * Not all mechanisms support confidentiality and other mechanisms |
| * might enable it even if the application doesn't request |
| * it. The application may check to see if the request was honored with |
| * the {@link #getConfState() getConfState} method. If confidentiality |
| * is enabled, only then will the mechanism honor a request for privacy |
| * in the {@link MessageProp#MessageProp(int, boolean) MessageProp} |
| * object that is passed in to the <code>wrap</code> method.<p> |
| * |
| * Enabling confidentiality will also automatically enable |
| * integrity.<p> |
| * |
| * @param state a boolean value indicating whether confidentiality |
| * should be enabled or not. |
| * @see #getConfState() |
| * @see #getIntegState() |
| * @see #requestInteg(boolean) |
| * @see MessageProp |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public void requestConf(boolean state) throws GSSException; |
| |
| /** |
| * Requests that data integrity be enabled |
| * for the <code>wrap</code> and <code>getMIC</code>methods. This |
| * request can only be made on the context initiator's side and it has |
| * to be done prior to the first call to <code>initSecContext</code>. |
| * |
| * Not all mechanisms support integrity and other mechanisms |
| * might enable it even if the application doesn't request |
| * it. The application may check to see if the request was honored with |
| * the {@link #getIntegState() getIntegState} method.<p> |
| * |
| * Disabling integrity will also automatically disable |
| * confidentiality.<p> |
| * |
| * @param state a boolean value indicating whether integrity |
| * should be enabled or not. |
| * @see #getIntegState() |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public void requestInteg(boolean state) throws GSSException; |
| |
| /** |
| * Requests a lifetime in seconds for the |
| * context. This method can only be called on the context initiator's |
| * side and it has to be done prior to the first call to |
| * <code>initSecContext</code>.<p> |
| * |
| * The actual lifetime of the context will depend on the capabilites of |
| * the underlying mechanism and the application should call the {@link |
| * #getLifetime() getLifetime} method to determine this.<p> |
| * |
| * @param lifetime the desired context lifetime in seconds. Use |
| * <code>INDEFINITE_LIFETIME</code> to request an indefinite lifetime |
| * and <code>DEFAULT_LIFETIME</code> to request a default lifetime. |
| * @see #getLifetime() |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public void requestLifetime(int lifetime) throws GSSException; |
| |
| /** |
| * Sets the channel bindings to be used during context |
| * establishment. This method can be called on both |
| * the context initiator's and the context acceptor's side, but it must |
| * be called before context establishment begins. This means that an |
| * initiator must call it before the first call to |
| * <code>initSecContext</code> and the acceptor must call it before the |
| * first call to <code>acceptSecContext</code>. |
| * |
| * @param cb the channel bindings to use. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public void setChannelBinding(ChannelBinding cb) throws GSSException; |
| |
| /** |
| * Determines if credential delegation is enabled on |
| * this context. It can be called by both the context initiator and the |
| * context acceptor. For a definitive answer this method must be |
| * called only after context establishment is complete. Note that if an |
| * initiator requests that delegation not be allowed the {@link |
| * #requestCredDeleg(boolean) requestCredDeleg} method will honor that |
| * request and this method will return <code>false</code> on the |
| * initiator's side from that point onwards. <p> |
| * |
| * @return true if delegation is enabled, false otherwise. |
| * @see #requestCredDeleg(boolean) |
| */ |
| public boolean getCredDelegState(); |
| |
| /** |
| * Determines if mutual authentication is enabled on |
| * this context. It can be called by both the context initiator and the |
| * context acceptor. For a definitive answer this method must be |
| * called only after context establishment is complete. An initiator |
| * that requests mutual authentication can call this method after |
| * context completion and dispose the context if its request was not |
| * honored.<p> |
| * |
| * @return true if mutual authentication is enabled, false otherwise. |
| * @see #requestMutualAuth(boolean) |
| */ |
| public boolean getMutualAuthState(); |
| |
| /** |
| * Determines if replay detection is enabled for the |
| * per-message security services from this context. It can be called by |
| * both the context initiator and the context acceptor. For a |
| * definitive answer this method must be called only after context |
| * establishment is complete. An initiator that requests replay |
| * detection can call this method after context completion and |
| * dispose the context if its request was not honored.<p> |
| * |
| * @return true if replay detection is enabled, false otherwise. |
| * @see #requestReplayDet(boolean) |
| */ |
| public boolean getReplayDetState(); |
| |
| /** |
| * Determines if sequence checking is enabled for the |
| * per-message security services from this context. It can be called by |
| * both the context initiator and the context acceptor. For a |
| * definitive answer this method must be called only after context |
| * establishment is complete. An initiator that requests sequence |
| * checking can call this method after context completion and |
| * dispose the context if its request was not honored.<p> |
| * |
| * @return true if sequence checking is enabled, false otherwise. |
| * @see #requestSequenceDet(boolean) |
| */ |
| public boolean getSequenceDetState(); |
| |
| /** |
| * Determines if the context initiator is |
| * anonymously authenticated to the context acceptor. It can be called by |
| * both the context initiator and the context acceptor, and at any |
| * time. <strong>On the initiator side, a call to this method determines |
| * if the identity of the initiator has been disclosed in any of the |
| * context establishment tokens that might have been generated thus far |
| * by <code>initSecContext</code>. An initiator that absolutely must be |
| * authenticated anonymously should call this method after each call to |
| * <code>initSecContext</code> to determine if the generated token |
| * should be sent to the peer or the context aborted.</strong> On the |
| * acceptor side, a call to this method determines if any of the tokens |
| * processed by <code>acceptSecContext</code> thus far have divulged |
| * the identity of the initiator.<p> |
| * |
| * @return true if the context initiator is still anonymous, false |
| * otherwise. |
| * @see #requestAnonymity(boolean) |
| */ |
| public boolean getAnonymityState(); |
| |
| /** |
| * Determines if the context is transferable to other processes |
| * through the use of the {@link #export() export} method. This call |
| * is only valid on fully established contexts. |
| * |
| * @return true if this context can be exported, false otherwise. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public boolean isTransferable() throws GSSException; |
| |
| /** |
| * Determines if the context is ready for per message operations to be |
| * used over it. Some mechanisms may allow the usage of the |
| * per-message operations before the context is fully established. |
| * |
| * @return true if methods like <code>wrap</code>, <code>unwrap</code>, |
| * <code>getMIC</code>, and <code>verifyMIC</code> can be used with |
| * this context at the current stage of context establishment, false |
| * otherwise. |
| */ |
| public boolean isProtReady(); |
| |
| /** |
| * Determines if data confidentiality is available |
| * over the context. This method can be called by both the context |
| * initiator and the context acceptor, but only after one of {@link |
| * #isProtReady() isProtReady} or {@link #isEstablished() |
| * isEstablished} return <code>true</code>. If this method returns |
| * <code>true</code>, so will {@link #getIntegState() |
| * getIntegState}<p> |
| * |
| * @return true if confidentiality services are available, false |
| * otherwise. |
| * @see #requestConf(boolean) |
| */ |
| public boolean getConfState(); |
| |
| /** |
| * Determines if data integrity is available |
| * over the context. This method can be called by both the context |
| * initiator and the context acceptor, but only after one of {@link |
| * #isProtReady() isProtReady} or {@link #isEstablished() |
| * isEstablished} return <code>true</code>. This method will always |
| * return <code>true</code> if {@link #getConfState() getConfState} |
| * returns true.<p> |
| * |
| * @return true if integrity services are available, false otherwise. |
| * @see #requestInteg(boolean) |
| */ |
| public boolean getIntegState(); |
| |
| /** |
| * Determines what the remaining lifetime for this |
| * context is. It can be called by both the context initiator and the |
| * context acceptor, but for a definitive answer it should be called |
| * only after {@link #isEstablished() isEstablished} returns |
| * true.<p> |
| * |
| * @return the remaining lifetime in seconds |
| * @see #requestLifetime(int) |
| */ |
| public int getLifetime(); |
| |
| /** |
| * Returns the name of the context initiator. This call is valid only |
| * after one of {@link #isProtReady() isProtReady} or {@link |
| * #isEstablished() isEstablished} return <code>true</code>. |
| * |
| * @return a GSSName that is an MN containing the name of the context |
| * initiator. |
| * @see GSSName |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public GSSName getSrcName() throws GSSException; |
| |
| /** |
| * Returns the name of the context acceptor. This call is valid only |
| * after one of {@link #isProtReady() isProtReady} or {@link |
| * #isEstablished() isEstablished} return <code>true</code>. |
| * |
| * @return a GSSName that is an MN containing the name of the context |
| * acceptor. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public GSSName getTargName() throws GSSException; |
| |
| /** |
| * Determines what mechanism is being used for this |
| * context. This method may be called before the context is fully |
| * established, but the mechanism returned may change on successive |
| * calls in the negotiated mechanism case. |
| * |
| * @return the Oid of the mechanism being used |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public Oid getMech() throws GSSException; |
| |
| /** |
| * Obtains the credentials delegated by the context |
| * initiator to the context acceptor. It should be called only on the |
| * context acceptor's side, and once the context is fully |
| * established. The caller can use the method {@link |
| * #getCredDelegState() getCredDelegState} to determine if there are |
| * any delegated credentials. |
| * |
| * @return a GSSCredential containing the initiator's delegated |
| * credentials, or <code>null</code> is no credentials |
| * were delegated. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public GSSCredential getDelegCred() throws GSSException; |
| |
| /** |
| * Determines if this is the context initiator. This |
| * can be called on both the context initiator's and context acceptor's |
| * side. |
| * |
| * @return true if this is the context initiator, false if it is the |
| * context acceptor. |
| * |
| * @throws GSSException containing the following |
| * major error codes: |
| * {@link GSSException#FAILURE GSSException.FAILURE} |
| */ |
| public boolean isInitiator() throws GSSException; |
| } |