make/com/oracle/security/ucrypto/Makefile - toolchain/jdk/jdk9_jdk - Git at Google

 #
 # Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License version 2 only, as
 # published by the Free Software Foundation.  Oracle designates this
 # particular file as subject to the "Classpath" exception as provided
 # by Oracle in the LICENSE file that accompanied this code.
 #
 # This code is distributed in the hope that it will be useful, but WITHOUT
 # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 # FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 # version 2 for more details (a copy is included in the LICENSE file that
 # accompanied this code).
 #
 # You should have received a copy of the GNU General Public License version
 # 2 along with this work; if not, write to the Free Software Foundation,
 # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 #
 # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 # or visit www.oracle.com if you need additional information or have any
 # questions.
 #

 #
 # Makefile for building ucrypto.jar and its native libraries.
 #
 # This file was modified from make/sun/security/pkcs11/Makefile.
 #
 #
 # (The terms "OpenJDK" and "JDK" below refer to OpenJDK and Oracle
 # JDK builds respectively.)
 #
 # This Makefile does the "real" build of the Ucrypto provider files.
 # Since the sources are unavailable for OpenJDK, this Makefile is only
 # useful for JDK.
 #
 #
 # Main Targets (JDK on Solaris):
 #
 #     all                      The usual, ucrypto.jar plus the native libraries.
 #                                  builds and installs the prebuilt/signed jar.
 #
 #     clobber/clean            Cleans up the temp directory, ucrypto.jar, the
 #                              native libraries, and the config file from the
 #                              build area
 #
 #     jar                      Builds, signs and installs ucrypto.jar
 #                              (Can only be done on machines with access to
 #                               the signing keystore)
 #
 # Other lesser-used Targets (JDK on Solaris):
 #
 #     build-jar                Builds ucrypto.jar (no sign/install)
 #
 #     sign                     Builds/signs ucrypto.jar (no install)
 #
 #     release                  Builds all targets in preparation
 #                              for workspace integration.
 #                              (Can only be done on machines with access to
 #                               the signing keystore)
 #
 #     install-prebuilt         Installs the pre-built jar files
 #
 # NOTE: None of the above target will update the prebuilt provider binary
 # under the closed workspace. To update it, you must explicitly copy the
 # binary from either the tmp/signed or lib/ext directory.
 #
 # This makefile was written to support parallel target execution.
 #

 BUILDDIR = ../../../..

 include $(BUILDDIR)/common/Defs.gmk

 ifndef OPENJDK
   ifneq ($(PLATFORM), solaris)
     all:
   else
     PACKAGE = com.oracle.security.ucrypto
   LIBRARY = j2ucrypto
   PRODUCT = oracle

   #
   # The following is for when we need to do postprocessing
   # (signing/obfuscation) against a read-only build.  If the OUTPUTDIR
   # isn't writable, the build currently crashes out.
   #
   ifdef ALT_JCE_BUILD_DIR
     # =====================================================
     # Where to place the output, in case we're building from a read-only
     # build area.  (e.g. a release engineering build.)
     JCE_BUILD_DIR=${ALT_JCE_BUILD_DIR}
     IGNORE_WRITABLE_OUTPUTDIR_TEST=true
   else
     JCE_BUILD_DIR=${TEMPDIR}
   endif

   JAVAC_MAX_WARNINGS=false
   JAVAC_LINT_OPTIONS=-Xlint:all,-deprecation
   JAVAC_WARNINGS_FATAL=true

   #
   # C and Java Files
   #
   include FILES_c.gmk

   #
   # Subdirectories of these are automatically included.
   #
   AUTO_FILES_JAVA_DIRS = com/oracle/security/ucrypto

   #
   # Java files that define native methods
   #
   FILES_export = \
       com/oracle/security/ucrypto/UcryptoProvider.java \
       com/oracle/security/ucrypto/NativeCipher.java \
       com/oracle/security/ucrypto/NativeDigest.java \
       com/oracle/security/ucrypto/NativeKey.java \
       com/oracle/security/ucrypto/NativeRSASignature.java \
       com/oracle/security/ucrypto/NativeRSACipher.java

   #
   # Find native code
   #
   vpath %.c \
     $(CLOSED_PLATFORM_SRC)/native/com/oracle/security/ucrypto

   #
   # Find include files
   #
   OTHER_INCLUDES += \
     -I$(CLOSED_PLATFORM_SRC)/native/com/oracle/security/ucrypto

   #
   # Rules
   #
   CLASSDESTDIR = $(TEMPDIR)/classes
   JAVAHFLAGS = -bootclasspath \
     "$(CLASSDESTDIR)$(CLASSPATH_SEPARATOR)$(CLASSBINDIR)"

   include $(BUILDDIR)/common/Mapfile-vers.gmk
   include $(BUILDDIR)/common/Library.gmk

   #
   # Libraries to link
   #
   OTHER_LDLIBS = -ldl

   # Default config file
   UCRYPTO_CFG_SRC   = $(CLOSED_SRC)/share/lib/security/ucrypto-solaris.cfg
   UCRYPTO_CFG_BUILD = $(LIBDIR)/security/ucrypto-solaris.cfg

   #
   # We use a variety of subdirectories in the $(TEMPDIR) depending on what
   # part of the build we're doing.  Build is initially done in the unsigned
   # area and when files are signed, they will be placed in the appropriate area.
   #
   UNSIGNED_DIR = $(TEMPDIR)/unsigned

   #
   # Rules
   #
   all: ucrypto-cfg build-jar install-prebuilt
 	$(build-warning)

   ucrypto-cfg: $(UCRYPTO_CFG_BUILD)

   $(UCRYPTO_CFG_BUILD): $(UCRYPTO_CFG_SRC)
 	$(install-file)

   include $(BUILDDIR)/javax/crypto/Defs-jce.gmk


   # =====================================================
   # Build the unsigned ucrypto.jar file.
   #

   JAR_DESTFILE = $(EXTDIR)/ucrypto.jar

   #
   # The ucrypto.jar needs to be in the extension class directory,
   # therefore none of its classes can appear in $(CLASSBINDIR).
   # Currently no one is using any of the internals, so these files
   # should not have been built.
   #

   #
   # Since the -C option to jar is used below, each directory entry must be
   # preceded with the appropriate directory to "cd" into.
   #
   JAR_DIRS = $(patsubst %, -C $(CLASSDESTDIR) %, $(AUTO_FILES_JAVA_DIRS))

   build-jar: $(UNSIGNED_DIR)/ucrypto.jar

   #
   # Build ucrypto.jar.
   #
   $(UNSIGNED_DIR)/ucrypto.jar: build
 	$(prep-target)
 	$(BOOT_JAR_CMD) cf $@ $(JAR_DIRS) \
 	    $(BOOT_JAR_JFLAGS)
 	@$(java-vm-cleanup)

   #
   # Sign ucrypto.jar
   #
   SIGNED_DIR = $(JCE_BUILD_DIR)/signed

   sign: $(SIGNED_DIR)/ucrypto.jar

   ifndef ALT_JCE_BUILD_DIR
     $(SIGNED_DIR)/ucrypto.jar: $(UNSIGNED_DIR)/ucrypto.jar
   else
     #
     # We have to remove the build dependency, otherwise, we'll try to rebuild it
     # which we can't do on a read-only filesystem.
     #
     $(SIGNED_DIR)/ucrypto.jar:
 	@if [ ! -r $(UNSIGNED_DIR)/ucrypto.jar ] ; then \
             $(ECHO) "Couldn't find $(UNSIGNED_DIR)/ucrypto.jar"; \
             exit 1; \
         fi
   endif
 	$(call sign-file, $(UNSIGNED_DIR)/ucrypto.jar)


   # =====================================================
   # Create the Release Engineering files.  Signed builds, etc.
   #

   release: $(SIGNED_DIR)/ucrypto.jar
 	$(RM) $(JCE_BUILD_DIR)/release/ucrypto.jar
 	$(MKDIR) -p $(JCE_BUILD_DIR)/release
 	$(CP) $(SIGNED_DIR)/ucrypto.jar $(JCE_BUILD_DIR)/release
 	$(release-warning)


   # =====================================================
   # Install routines.
   #

   #
   # Install ucrypto.jar, depending on which type is requested.
   #
   jar: $(JAR_DESTFILE)
 	$(release-warning)

   $(JAR_DESTFILE): $(SIGNED_DIR)/ucrypto.jar
 	$(install-file)

   install-prebuilt:
 	@$(ECHO) "\n>>>Installing prebuilt OracleUcrypto provider..."
 	$(RM) $(JAR_DESTFILE)
 	$(CP) $(PREBUILT_DIR)/ucrypto/ucrypto.jar $(JAR_DESTFILE)


   # =====================================================
   # Support routines.
   #
   clobber clean::
 	$(RM) -r $(JAR_DESTFILE) $(TEMPDIR) $(JCE_BUILD_DIR)
 	$(RM) -r $(UCRYPTO_CFG_BUILD)

   .PHONY: build-jar jar sign release install-prebuilt

   endif #ifneq ($(PLATFORM), solaris)
 endif #ifndef OPENJDK
	#
	# Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved.
	# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
	#
	# This code is free software; you can redistribute it and/or modify it
	# under the terms of the GNU General Public License version 2 only, as
	# published by the Free Software Foundation. Oracle designates this
	# particular file as subject to the "Classpath" exception as provided
	# by Oracle in the LICENSE file that accompanied this code.
	#
	# This code is distributed in the hope that it will be useful, but WITHOUT
	# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
	# version 2 for more details (a copy is included in the LICENSE file that
	# accompanied this code).
	#
	# You should have received a copy of the GNU General Public License version
	# 2 along with this work; if not, write to the Free Software Foundation,
	# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
	#
	# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
	# or visit www.oracle.com if you need additional information or have any
	# questions.
	#

	#
	# Makefile for building ucrypto.jar and its native libraries.
	#
	# This file was modified from make/sun/security/pkcs11/Makefile.
	#
	#
	# (The terms "OpenJDK" and "JDK" below refer to OpenJDK and Oracle
	# JDK builds respectively.)
	#
	# This Makefile does the "real" build of the Ucrypto provider files.
	# Since the sources are unavailable for OpenJDK, this Makefile is only
	# useful for JDK.
	#
	#
	# Main Targets (JDK on Solaris):
	#
	# all The usual, ucrypto.jar plus the native libraries.
	# builds and installs the prebuilt/signed jar.
	#
	# clobber/clean Cleans up the temp directory, ucrypto.jar, the
	# native libraries, and the config file from the
	# build area
	#
	# jar Builds, signs and installs ucrypto.jar
	# (Can only be done on machines with access to
	# the signing keystore)
	#
	# Other lesser-used Targets (JDK on Solaris):
	#
	# build-jar Builds ucrypto.jar (no sign/install)
	#
	# sign Builds/signs ucrypto.jar (no install)
	#
	# release Builds all targets in preparation
	# for workspace integration.
	# (Can only be done on machines with access to
	# the signing keystore)
	#
	# install-prebuilt Installs the pre-built jar files
	#
	# NOTE: None of the above target will update the prebuilt provider binary
	# under the closed workspace. To update it, you must explicitly copy the
	# binary from either the tmp/signed or lib/ext directory.
	#
	# This makefile was written to support parallel target execution.
	#

	BUILDDIR = ../../../..

	include $(BUILDDIR)/common/Defs.gmk

	ifndef OPENJDK
	ifneq ($(PLATFORM), solaris)
	all:
	else
	PACKAGE = com.oracle.security.ucrypto
	LIBRARY = j2ucrypto
	PRODUCT = oracle

	#
	# The following is for when we need to do postprocessing
	# (signing/obfuscation) against a read-only build. If the OUTPUTDIR
	# isn't writable, the build currently crashes out.
	#
	ifdef ALT_JCE_BUILD_DIR
	# =====================================================
	# Where to place the output, in case we're building from a read-only
	# build area. (e.g. a release engineering build.)
	JCE_BUILD_DIR=${ALT_JCE_BUILD_DIR}
	IGNORE_WRITABLE_OUTPUTDIR_TEST=true
	else
	JCE_BUILD_DIR=${TEMPDIR}
	endif

	JAVAC_MAX_WARNINGS=false
	JAVAC_LINT_OPTIONS=-Xlint:all,-deprecation
	JAVAC_WARNINGS_FATAL=true

	#
	# C and Java Files
	#
	include FILES_c.gmk

	#
	# Subdirectories of these are automatically included.
	#
	AUTO_FILES_JAVA_DIRS = com/oracle/security/ucrypto

	#
	# Java files that define native methods
	#
	FILES_export = \
	com/oracle/security/ucrypto/UcryptoProvider.java \
	com/oracle/security/ucrypto/NativeCipher.java \
	com/oracle/security/ucrypto/NativeDigest.java \
	com/oracle/security/ucrypto/NativeKey.java \
	com/oracle/security/ucrypto/NativeRSASignature.java \
	com/oracle/security/ucrypto/NativeRSACipher.java

	#
	# Find native code
	#
	vpath %.c \
	$(CLOSED_PLATFORM_SRC)/native/com/oracle/security/ucrypto

	#
	# Find include files
	#
	OTHER_INCLUDES += \
	-I$(CLOSED_PLATFORM_SRC)/native/com/oracle/security/ucrypto

	#
	# Rules
	#
	CLASSDESTDIR = $(TEMPDIR)/classes
	JAVAHFLAGS = -bootclasspath \
	"$(CLASSDESTDIR)$(CLASSPATH_SEPARATOR)$(CLASSBINDIR)"

	include $(BUILDDIR)/common/Mapfile-vers.gmk
	include $(BUILDDIR)/common/Library.gmk

	#
	# Libraries to link
	#
	OTHER_LDLIBS = -ldl

	# Default config file
	UCRYPTO_CFG_SRC = $(CLOSED_SRC)/share/lib/security/ucrypto-solaris.cfg
	UCRYPTO_CFG_BUILD = $(LIBDIR)/security/ucrypto-solaris.cfg

	#
	# We use a variety of subdirectories in the $(TEMPDIR) depending on what
	# part of the build we're doing. Build is initially done in the unsigned
	# area and when files are signed, they will be placed in the appropriate area.
	#
	UNSIGNED_DIR = $(TEMPDIR)/unsigned

	#
	# Rules
	#
	all: ucrypto-cfg build-jar install-prebuilt
	$(build-warning)

	ucrypto-cfg: $(UCRYPTO_CFG_BUILD)

	$(UCRYPTO_CFG_BUILD): $(UCRYPTO_CFG_SRC)
	$(install-file)

	include $(BUILDDIR)/javax/crypto/Defs-jce.gmk


	# =====================================================
	# Build the unsigned ucrypto.jar file.
	#

	JAR_DESTFILE = $(EXTDIR)/ucrypto.jar

	#
	# The ucrypto.jar needs to be in the extension class directory,
	# therefore none of its classes can appear in $(CLASSBINDIR).
	# Currently no one is using any of the internals, so these files
	# should not have been built.
	#

	#
	# Since the -C option to jar is used below, each directory entry must be
	# preceded with the appropriate directory to "cd" into.
	#
	JAR_DIRS = $(patsubst %, -C $(CLASSDESTDIR) %, $(AUTO_FILES_JAVA_DIRS))

	build-jar: $(UNSIGNED_DIR)/ucrypto.jar

	#
	# Build ucrypto.jar.
	#
	$(UNSIGNED_DIR)/ucrypto.jar: build
	$(prep-target)
	$(BOOT_JAR_CMD) cf $@ $(JAR_DIRS) \
	$(BOOT_JAR_JFLAGS)
	@$(java-vm-cleanup)

	#
	# Sign ucrypto.jar
	#
	SIGNED_DIR = $(JCE_BUILD_DIR)/signed

	sign: $(SIGNED_DIR)/ucrypto.jar

	ifndef ALT_JCE_BUILD_DIR
	$(SIGNED_DIR)/ucrypto.jar: $(UNSIGNED_DIR)/ucrypto.jar
	else
	#
	# We have to remove the build dependency, otherwise, we'll try to rebuild it
	# which we can't do on a read-only filesystem.
	#
	$(SIGNED_DIR)/ucrypto.jar:
	@if [ ! -r $(UNSIGNED_DIR)/ucrypto.jar ] ; then \
	$(ECHO) "Couldn't find $(UNSIGNED_DIR)/ucrypto.jar"; \
	exit 1; \
	fi
	endif
	$(call sign-file, $(UNSIGNED_DIR)/ucrypto.jar)


	# =====================================================
	# Create the Release Engineering files. Signed builds, etc.
	#

	release: $(SIGNED_DIR)/ucrypto.jar
	$(RM) $(JCE_BUILD_DIR)/release/ucrypto.jar
	$(MKDIR) -p $(JCE_BUILD_DIR)/release
	$(CP) $(SIGNED_DIR)/ucrypto.jar $(JCE_BUILD_DIR)/release
	$(release-warning)


	# =====================================================
	# Install routines.
	#

	#
	# Install ucrypto.jar, depending on which type is requested.
	#
	jar: $(JAR_DESTFILE)
	$(release-warning)

	$(JAR_DESTFILE): $(SIGNED_DIR)/ucrypto.jar
	$(install-file)

	install-prebuilt:
	@$(ECHO) "\n>>>Installing prebuilt OracleUcrypto provider..."
	$(RM) $(JAR_DESTFILE)
	$(CP) $(PREBUILT_DIR)/ucrypto/ucrypto.jar $(JAR_DESTFILE)


	# =====================================================
	# Support routines.
	#
	clobber clean::
	$(RM) -r $(JAR_DESTFILE) $(TEMPDIR) $(JCE_BUILD_DIR)
	$(RM) -r $(UCRYPTO_CFG_BUILD)

	.PHONY: build-jar jar sign release install-prebuilt

	endif #ifneq ($(PLATFORM), solaris)
	endif #ifndef OPENJDK