| /* |
| * Copyright (c) 2003, 2009, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| */ |
| |
| /* |
| * @test |
| * @bug 4495742 |
| * @summary Demonstrate SSLEngine switch from no client auth to client auth. |
| * @ignore incompatible with disabled unsafe renegotiation (6898739), please |
| * reenable when safe renegotiation is implemented. |
| * |
| * @author Brad R. Wetmore |
| */ |
| |
| /** |
| * A SSLEngine usage example which simplifies the presentation |
| * by removing the I/O and multi-threading concerns. |
| * |
| * The test creates two SSLEngines, simulating a client and server. |
| * The "transport" layer consists two byte buffers: think of them |
| * as directly connected pipes. |
| * |
| * Note, this is a *very* simple example: real code will be much more |
| * involved. For example, different threading and I/O models could be |
| * used, transport mechanisms could close unexpectedly, and so on. |
| * |
| * When this application runs, notice that several messages |
| * (wrap/unwrap) pass before any application data is consumed or |
| * produced. (For more information, please see the SSL/TLS |
| * specifications.) There may several steps for a successful handshake, |
| * so it's typical to see the following series of operations: |
| * |
| * client server message |
| * ====== ====== ======= |
| * wrap() ... ClientHello |
| * ... unwrap() ClientHello |
| * ... wrap() ServerHello/Certificate |
| * unwrap() ... ServerHello/Certificate |
| * wrap() ... ClientKeyExchange |
| * wrap() ... ChangeCipherSpec |
| * wrap() ... Finished |
| * ... unwrap() ClientKeyExchange |
| * ... unwrap() ChangeCipherSpec |
| * ... unwrap() Finished |
| * ... wrap() ChangeCipherSpec |
| * ... wrap() Finished |
| * unwrap() ... ChangeCipherSpec |
| * unwrap() ... Finished |
| * |
| * In this example, we do a rehandshake and make sure that completes |
| * correctly. |
| */ |
| |
| import javax.net.ssl.*; |
| import javax.net.ssl.SSLEngineResult.*; |
| import java.io.*; |
| import java.security.*; |
| import java.nio.*; |
| |
| public class NoAuthClientAuth { |
| |
| /* |
| * Enables logging of the SSLEngine operations. |
| */ |
| private static boolean logging = true; |
| |
| /* |
| * Enables the JSSE system debugging system property: |
| * |
| * -Djavax.net.debug=all |
| * |
| * This gives a lot of low-level information about operations underway, |
| * including specific handshake messages, and might be best examined |
| * after gaining some familiarity with this application. |
| */ |
| private static boolean debug = false; |
| |
| private SSLContext sslc; |
| |
| private SSLEngine clientEngine; // client Engine |
| private ByteBuffer clientOut; // write side of clientEngine |
| private ByteBuffer clientIn; // read side of clientEngine |
| |
| private SSLEngine serverEngine; // server Engine |
| private ByteBuffer serverOut; // write side of serverEngine |
| private ByteBuffer serverIn; // read side of serverEngine |
| |
| /* |
| * For data transport, this example uses local ByteBuffers. This |
| * isn't really useful, but the purpose of this example is to show |
| * SSLEngine concepts, not how to do network transport. |
| */ |
| private ByteBuffer cTOs; // "reliable" transport client->server |
| private ByteBuffer sTOc; // "reliable" transport server->client |
| |
| /* |
| * The following is to set up the keystores. |
| */ |
| private static String pathToStores = "../../../../../etc"; |
| private static String keyStoreFile = "keystore"; |
| private static String trustStoreFile = "truststore"; |
| private static String passwd = "passphrase"; |
| |
| private static String keyFilename = |
| System.getProperty("test.src", ".") + "/" + pathToStores + |
| "/" + keyStoreFile; |
| private static String trustFilename = |
| System.getProperty("test.src", ".") + "/" + pathToStores + |
| "/" + trustStoreFile; |
| |
| /* |
| * Main entry point for this test. |
| */ |
| public static void main(String args[]) throws Exception { |
| if (debug) { |
| System.setProperty("javax.net.debug", "all"); |
| } |
| |
| NoAuthClientAuth test = new NoAuthClientAuth(); |
| test.runTest(); |
| |
| System.out.println("Test Passed."); |
| } |
| |
| /* |
| * Create an initialized SSLContext to use for these tests. |
| */ |
| public NoAuthClientAuth() throws Exception { |
| |
| KeyStore ks = KeyStore.getInstance("JKS"); |
| KeyStore ts = KeyStore.getInstance("JKS"); |
| |
| char[] passphrase = "passphrase".toCharArray(); |
| |
| ks.load(new FileInputStream(keyFilename), passphrase); |
| ts.load(new FileInputStream(trustFilename), passphrase); |
| |
| KeyManagerFactory kmf = KeyManagerFactory.getInstance("SunX509"); |
| kmf.init(ks, passphrase); |
| |
| TrustManagerFactory tmf = TrustManagerFactory.getInstance("SunX509"); |
| tmf.init(ts); |
| |
| SSLContext sslCtx = SSLContext.getInstance("TLS"); |
| |
| sslCtx.init(kmf.getKeyManagers(), tmf.getTrustManagers(), null); |
| |
| sslc = sslCtx; |
| } |
| |
| /* |
| * Run the test. |
| * |
| * Sit in a tight loop, both engines calling wrap/unwrap regardless |
| * of whether data is available or not. We do this until both engines |
| * report back they are closed. |
| * |
| * The main loop handles all of the I/O phases of the SSLEngine's |
| * lifetime: |
| * |
| * initial handshaking |
| * application data transfer |
| * engine closing |
| * |
| * One could easily separate these phases into separate |
| * sections of code. |
| */ |
| private void runTest() throws Exception { |
| |
| createSSLEngines(); |
| createBuffers(); |
| |
| SSLEngineResult clientResult; // results from client's last operation |
| SSLEngineResult serverResult; // results from server's last operation |
| |
| /* |
| * Examining the SSLEngineResults could be much more involved, |
| * and may alter the overall flow of the application. |
| * |
| * For example, if we received a BUFFER_OVERFLOW when trying |
| * to write to the output pipe, we could reallocate a larger |
| * pipe, but instead we wait for the peer to drain it. |
| */ |
| int hsCompleted = 0; |
| while (!isEngineClosed(clientEngine) || |
| !isEngineClosed(serverEngine)) { |
| |
| log("================"); |
| |
| clientResult = clientEngine.wrap(clientOut, cTOs); |
| log("client wrap: ", clientResult); |
| runDelegatedTasks(clientResult, clientEngine); |
| clientOut.rewind(); |
| |
| serverResult = serverEngine.wrap(serverOut, sTOc); |
| log("server wrap: ", serverResult); |
| runDelegatedTasks(serverResult, serverEngine); |
| serverOut.rewind(); |
| |
| // Jeanfrancois: |
| // Here is the main rehandshaking step. |
| if (serverResult.getHandshakeStatus() == |
| HandshakeStatus.FINISHED) { |
| hsCompleted++; |
| log("\t" + hsCompleted + " handshake completed"); |
| if (hsCompleted == 1) { |
| try { |
| serverEngine.getSession().getPeerCertificates(); |
| throw new Exception("Should have got exception"); |
| } catch (SSLPeerUnverifiedException e) { |
| System.out.println("Caught proper exception." + e); |
| } |
| log("\tInvalidating session, setting client auth, " + |
| " starting rehandshake"); |
| serverEngine.getSession().invalidate(); |
| serverEngine.setNeedClientAuth(true); |
| serverEngine.beginHandshake(); |
| } else if (hsCompleted == 2) { |
| java.security.cert.Certificate [] certs = |
| serverEngine.getSession().getPeerCertificates(); |
| System.out.println("Client Certificate(s) received"); |
| for (java.security.cert.Certificate c : certs) { |
| System.out.println(c); |
| } |
| log("Closing server."); |
| serverEngine.closeOutbound(); |
| } // nothing. |
| } |
| |
| cTOs.flip(); |
| sTOc.flip(); |
| |
| log("----"); |
| |
| clientResult = clientEngine.unwrap(sTOc, clientIn); |
| log("client unwrap: ", clientResult); |
| runDelegatedTasks(clientResult, clientEngine); |
| clientIn.clear(); |
| |
| serverResult = serverEngine.unwrap(cTOs, serverIn); |
| log("server unwrap: ", serverResult); |
| runDelegatedTasks(serverResult, serverEngine); |
| serverIn.clear(); |
| |
| cTOs.compact(); |
| sTOc.compact(); |
| } |
| } |
| |
| /* |
| * Using the SSLContext created during object creation, |
| * create/configure the SSLEngines we'll use for this test. |
| */ |
| private void createSSLEngines() throws Exception { |
| /* |
| * Configure the serverEngine to act as a server in the SSL/TLS |
| * handshake. Also, require SSL client authentication. |
| */ |
| serverEngine = sslc.createSSLEngine(); |
| serverEngine.setUseClientMode(false); |
| serverEngine.setNeedClientAuth(false); |
| |
| /* |
| * Similar to above, but using client mode instead. |
| */ |
| clientEngine = sslc.createSSLEngine("client", 80); |
| clientEngine.setUseClientMode(true); |
| } |
| |
| /* |
| * Create and size the buffers appropriately. |
| */ |
| private void createBuffers() { |
| |
| /* |
| * We'll assume the buffer sizes are the same |
| * between client and server. |
| */ |
| SSLSession session = clientEngine.getSession(); |
| int appBufferMax = session.getApplicationBufferSize(); |
| int netBufferMax = session.getPacketBufferSize(); |
| |
| /* |
| * We'll make the input buffers a bit bigger than the max needed |
| * size, so that unwrap()s following a successful data transfer |
| * won't generate BUFFER_OVERFLOWS. |
| * |
| * We'll use a mix of direct and indirect ByteBuffers for |
| * tutorial purposes only. In reality, only use direct |
| * ByteBuffers when they give a clear performance enhancement. |
| */ |
| clientIn = ByteBuffer.allocate(appBufferMax + 50); |
| serverIn = ByteBuffer.allocate(appBufferMax + 50); |
| |
| cTOs = ByteBuffer.allocateDirect(netBufferMax); |
| sTOc = ByteBuffer.allocateDirect(netBufferMax); |
| |
| clientOut = ByteBuffer.wrap("Hi Server, I'm Client".getBytes()); |
| serverOut = ByteBuffer.wrap("Hello Client, I'm Server".getBytes()); |
| } |
| |
| /* |
| * If the result indicates that we have outstanding tasks to do, |
| * go ahead and run them in this thread. |
| */ |
| private static void runDelegatedTasks(SSLEngineResult result, |
| SSLEngine engine) throws Exception { |
| |
| if (result.getHandshakeStatus() == HandshakeStatus.NEED_TASK) { |
| Runnable runnable; |
| while ((runnable = engine.getDelegatedTask()) != null) { |
| log("\trunning delegated task..."); |
| runnable.run(); |
| } |
| HandshakeStatus hsStatus = engine.getHandshakeStatus(); |
| if (hsStatus == HandshakeStatus.NEED_TASK) { |
| throw new Exception( |
| "handshake shouldn't need additional tasks"); |
| } |
| log("\tnew HandshakeStatus: " + hsStatus); |
| } |
| } |
| |
| private static boolean isEngineClosed(SSLEngine engine) { |
| return (engine.isOutboundDone() && engine.isInboundDone()); |
| } |
| |
| /* |
| * Simple check to make sure everything came across as expected. |
| */ |
| private static void checkTransfer(ByteBuffer a, ByteBuffer b) |
| throws Exception { |
| a.flip(); |
| b.flip(); |
| |
| if (!a.equals(b)) { |
| throw new Exception("Data didn't transfer cleanly"); |
| } else { |
| log("\tData transferred cleanly"); |
| } |
| |
| a.position(a.limit()); |
| b.position(b.limit()); |
| a.limit(a.capacity()); |
| b.limit(b.capacity()); |
| } |
| |
| /* |
| * Logging code |
| */ |
| private static boolean resultOnce = true; |
| |
| private static void log(String str, SSLEngineResult result) { |
| if (!logging) { |
| return; |
| } |
| if (resultOnce) { |
| resultOnce = false; |
| System.out.println("The format of the SSLEngineResult is: \n" + |
| "\t\"getStatus() / getHandshakeStatus()\" +\n" + |
| "\t\"bytesConsumed() / bytesProduced()\"\n"); |
| } |
| HandshakeStatus hsStatus = result.getHandshakeStatus(); |
| log(str + |
| result.getStatus() + "/" + hsStatus + ", " + |
| result.bytesConsumed() + "/" + result.bytesProduced() + |
| " bytes"); |
| if (hsStatus == HandshakeStatus.FINISHED) { |
| log("\t...ready for application data"); |
| } |
| } |
| |
| private static void log(String str) { |
| if (logging) { |
| System.out.println(str); |
| } |
| } |
| } |
