| # |
| # This is the "master security properties file". |
| # |
| # In this file, various security properties are set for use by |
| # java.security classes. This is where users can statically register |
| # Cryptography Package Providers ("providers" for short). The term |
| # "provider" refers to a package or set of packages that supply a |
| # concrete implementation of a subset of the cryptography aspects of |
| # the Java Security API. A provider may, for example, implement one or |
| # more digital signature algorithms or message digest algorithms. |
| # |
| # Each provider must implement a subclass of the Provider class. |
| # To register a provider in this master security properties file, |
| # specify the Provider subclass name and priority in the format |
| # |
| # security.provider.<n>=<className> |
| # |
| # This declares a provider, and specifies its preference |
| # order n. The preference order is the order in which providers are |
| # searched for requested algorithms (when no specific provider is |
| # requested). The order is 1-based; 1 is the most preferred, followed |
| # by 2, and so on. |
| # |
| # <className> must specify the subclass of the Provider class whose |
| # constructor sets the values of various properties that are required |
| # for the Java Security API to look up the algorithms or other |
| # facilities implemented by the provider. |
| # |
| # There must be at least one provider specification in java.security. |
| # There is a default provider that comes standard with the JDK. It |
| # is called the "SUN" provider, and its Provider subclass |
| # named Sun appears in the sun.security.provider package. Thus, the |
| # "SUN" provider is registered via the following: |
| # |
| # security.provider.1=sun.security.provider.Sun |
| # |
| # (The number 1 is used for the default provider.) |
| # |
| # Note: Providers can be dynamically registered instead by calls to |
| # either the addProvider or insertProviderAt method in the Security |
| # class. |
| |
| # |
| # List of providers and their preference orders (see above): |
| # |
| security.provider.1=sun.security.pkcs11.SunPKCS11 ${java.home}/lib/security/sunpkcs11-solaris.cfg |
| security.provider.2=sun.security.provider.Sun |
| security.provider.3=sun.security.rsa.SunRsaSign |
| security.provider.4=sun.security.ec.SunEC |
| security.provider.5=com.sun.net.ssl.internal.ssl.Provider |
| security.provider.6=com.sun.crypto.provider.SunJCE |
| security.provider.7=sun.security.jgss.SunProvider |
| security.provider.8=com.sun.security.sasl.Provider |
| security.provider.9=org.jcp.xml.dsig.internal.dom.XMLDSigRI |
| security.provider.10=sun.security.smartcardio.SunPCSC |
| |
| # |
| # Select the source of seed data for SecureRandom. By default an |
| # attempt is made to use the entropy gathering device specified by |
| # the securerandom.source property. If an exception occurs when |
| # accessing the URL then the traditional system/thread activity |
| # algorithm is used. |
| # |
| # On Solaris and Linux systems, if file:/dev/urandom is specified and it |
| # exists, a special SecureRandom implementation is activated by default. |
| # This "NativePRNG" reads random bytes directly from /dev/urandom. |
| # |
| # On Windows systems, the URLs file:/dev/random and file:/dev/urandom |
| # enables use of the Microsoft CryptoAPI seed functionality. |
| # |
| securerandom.source=file:/dev/urandom |
| # |
| # The entropy gathering device is described as a URL and can also |
| # be specified with the system property "java.security.egd". For example, |
| # -Djava.security.egd=file:/dev/urandom |
| # Specifying this system property will override the securerandom.source |
| # setting. |
| |
| # |
| # Class to instantiate as the javax.security.auth.login.Configuration |
| # provider. |
| # |
| login.configuration.provider=com.sun.security.auth.login.ConfigFile |
| |
| # |
| # Default login configuration file |
| # |
| #login.config.url.1=file:${user.home}/.java.login.config |
| |
| # |
| # Class to instantiate as the system Policy. This is the name of the class |
| # that will be used as the Policy object. |
| # |
| policy.provider=sun.security.provider.PolicyFile |
| |
| # The default is to have a single system-wide policy file, |
| # and a policy file in the user's home directory. |
| policy.url.1=file:${java.home}/lib/security/java.policy |
| policy.url.2=file:${user.home}/.java.policy |
| |
| # whether or not we expand properties in the policy file |
| # if this is set to false, properties (${...}) will not be expanded in policy |
| # files. |
| policy.expandProperties=true |
| |
| # whether or not we allow an extra policy to be passed on the command line |
| # with -Djava.security.policy=somefile. Comment out this line to disable |
| # this feature. |
| policy.allowSystemProperty=true |
| |
| # whether or not we look into the IdentityScope for trusted Identities |
| # when encountering a 1.1 signed JAR file. If the identity is found |
| # and is trusted, we grant it AllPermission. |
| policy.ignoreIdentityScope=false |
| |
| # |
| # Default keystore type. |
| # |
| keystore.type=jks |
| |
| # |
| # Class to instantiate as the system scope: |
| # |
| system.scope=sun.security.provider.IdentityDatabase |
| |
| # |
| # List of comma-separated packages that start with or equal this string |
| # will cause a security exception to be thrown when |
| # passed to checkPackageAccess unless the |
| # corresponding RuntimePermission ("accessClassInPackage."+package) has |
| # been granted. |
| package.access=sun.,com.sun.imageio. |
| |
| # |
| # List of comma-separated packages that start with or equal this string |
| # will cause a security exception to be thrown when |
| # passed to checkPackageDefinition unless the |
| # corresponding RuntimePermission ("defineClassInPackage."+package) has |
| # been granted. |
| # |
| # by default, no packages are restricted for definition, and none of |
| # the class loaders supplied with the JDK call checkPackageDefinition. |
| # |
| #package.definition= |
| |
| # |
| # Determines whether this properties file can be appended to |
| # or overridden on the command line via -Djava.security.properties |
| # |
| security.overridePropertiesFile=true |
| |
| # |
| # Determines the default key and trust manager factory algorithms for |
| # the javax.net.ssl package. |
| # |
| ssl.KeyManagerFactory.algorithm=SunX509 |
| ssl.TrustManagerFactory.algorithm=PKIX |
| |
| # |
| # The Java-level namelookup cache policy for successful lookups: |
| # |
| # any negative value: caching forever |
| # any positive value: the number of seconds to cache an address for |
| # zero: do not cache |
| # |
| # default value is forever (FOREVER). For security reasons, this |
| # caching is made forever when a security manager is set. When a security |
| # manager is not set, the default behavior is to cache for 30 seconds. |
| # |
| # NOTE: setting this to anything other than the default value can have |
| # serious security implications. Do not set it unless |
| # you are sure you are not exposed to DNS spoofing attack. |
| # |
| #networkaddress.cache.ttl=-1 |
| |
| # The Java-level namelookup cache policy for failed lookups: |
| # |
| # any negative value: cache forever |
| # any positive value: the number of seconds to cache negative lookup results |
| # zero: do not cache |
| # |
| # In some Microsoft Windows networking environments that employ |
| # the WINS name service in addition to DNS, name service lookups |
| # that fail may take a noticeably long time to return (approx. 5 seconds). |
| # For this reason the default caching policy is to maintain these |
| # results for 10 seconds. |
| # |
| # |
| networkaddress.cache.negative.ttl=10 |
| |
| # |
| # Properties to configure OCSP for certificate revocation checking |
| # |
| |
| # Enable OCSP |
| # |
| # By default, OCSP is not used for certificate revocation checking. |
| # This property enables the use of OCSP when set to the value "true". |
| # |
| # NOTE: SocketPermission is required to connect to an OCSP responder. |
| # |
| # Example, |
| # ocsp.enable=true |
| |
| # |
| # Location of the OCSP responder |
| # |
| # By default, the location of the OCSP responder is determined implicitly |
| # from the certificate being validated. This property explicitly specifies |
| # the location of the OCSP responder. The property is used when the |
| # Authority Information Access extension (defined in RFC 3280) is absent |
| # from the certificate or when it requires overriding. |
| # |
| # Example, |
| # ocsp.responderURL=http://ocsp.example.net:80 |
| |
| # |
| # Subject name of the OCSP responder's certificate |
| # |
| # By default, the certificate of the OCSP responder is that of the issuer |
| # of the certificate being validated. This property identifies the certificate |
| # of the OCSP responder when the default does not apply. Its value is a string |
| # distinguished name (defined in RFC 2253) which identifies a certificate in |
| # the set of certificates supplied during cert path validation. In cases where |
| # the subject name alone is not sufficient to uniquely identify the certificate |
| # then both the "ocsp.responderCertIssuerName" and |
| # "ocsp.responderCertSerialNumber" properties must be used instead. When this |
| # property is set then those two properties are ignored. |
| # |
| # Example, |
| # ocsp.responderCertSubjectName="CN=OCSP Responder, O=XYZ Corp" |
| |
| # |
| # Issuer name of the OCSP responder's certificate |
| # |
| # By default, the certificate of the OCSP responder is that of the issuer |
| # of the certificate being validated. This property identifies the certificate |
| # of the OCSP responder when the default does not apply. Its value is a string |
| # distinguished name (defined in RFC 2253) which identifies a certificate in |
| # the set of certificates supplied during cert path validation. When this |
| # property is set then the "ocsp.responderCertSerialNumber" property must also |
| # be set. When the "ocsp.responderCertSubjectName" property is set then this |
| # property is ignored. |
| # |
| # Example, |
| # ocsp.responderCertIssuerName="CN=Enterprise CA, O=XYZ Corp" |
| |
| # |
| # Serial number of the OCSP responder's certificate |
| # |
| # By default, the certificate of the OCSP responder is that of the issuer |
| # of the certificate being validated. This property identifies the certificate |
| # of the OCSP responder when the default does not apply. Its value is a string |
| # of hexadecimal digits (colon or space separators may be present) which |
| # identifies a certificate in the set of certificates supplied during cert path |
| # validation. When this property is set then the "ocsp.responderCertIssuerName" |
| # property must also be set. When the "ocsp.responderCertSubjectName" property |
| # is set then this property is ignored. |
| # |
| # Example, |
| # ocsp.responderCertSerialNumber=2A:FF:00 |
| |