| # |
| # Copyright (c) 1999, 2010, Oracle and/or its affiliates. All rights reserved. |
| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| # |
| # This code is free software; you can redistribute it and/or modify it |
| # under the terms of the GNU General Public License version 2 only, as |
| # published by the Free Software Foundation. |
| # |
| # This code is distributed in the hope that it will be useful, but WITHOUT |
| # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| # version 2 for more details (a copy is included in the LICENSE file that |
| # accompanied this code). |
| # |
| # You should have received a copy of the GNU General Public License version |
| # 2 along with this work; if not, write to the Free Software Foundation, |
| # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| # |
| # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| # or visit www.oracle.com if you need additional information or have any |
| # questions. |
| # |
| # |
| |
| #------------------------------------------------------------------------ |
| # CC, CPP & AS |
| |
| ifdef ALT_COMPILER_PATH |
| CPP = $(ALT_COMPILER_PATH)/g++ |
| CC = $(ALT_COMPILER_PATH)/gcc |
| else |
| CPP = g++ |
| CC = gcc |
| endif |
| |
| AS = $(CC) -c |
| |
| # -dumpversion in gcc-2.91 shows "egcs-2.91.66". In later version, it only |
| # prints the numbers (e.g. "2.95", "3.2.1") |
| CC_VER_MAJOR := $(shell $(CC) -dumpversion | sed 's/egcs-//' | cut -d'.' -f1) |
| CC_VER_MINOR := $(shell $(CC) -dumpversion | sed 's/egcs-//' | cut -d'.' -f2) |
| |
| # check for precompiled headers support |
| ifneq "$(shell expr \( $(CC_VER_MAJOR) \> 3 \) \| \( \( $(CC_VER_MAJOR) = 3 \) \& \( $(CC_VER_MINOR) \>= 4 \) \))" "0" |
| USE_PRECOMPILED_HEADER=1 |
| PRECOMPILED_HEADER_DIR=. |
| PRECOMPILED_HEADER=$(PRECOMPILED_HEADER_DIR)/incls/_precompiled.incl.gch |
| endif |
| |
| |
| #------------------------------------------------------------------------ |
| # Compiler flags |
| |
| # position-independent code |
| PICFLAG = -fPIC |
| |
| VM_PICFLAG/LIBJVM = $(PICFLAG) |
| VM_PICFLAG/AOUT = |
| VM_PICFLAG = $(VM_PICFLAG/$(LINK_INTO)) |
| |
| ifeq ($(ZERO_BUILD), true) |
| CFLAGS += $(LIBFFI_CFLAGS) |
| endif |
| ifeq ($(SHARK_BUILD), true) |
| CFLAGS += $(LLVM_CFLAGS) |
| endif |
| CFLAGS += $(VM_PICFLAG) |
| CFLAGS += -fno-rtti |
| CFLAGS += -fno-exceptions |
| CFLAGS += -D_REENTRANT |
| CFLAGS += -fcheck-new |
| |
| ARCHFLAG = $(ARCHFLAG/$(BUILDARCH)) |
| ARCHFLAG/i486 = -m32 -march=i586 |
| ARCHFLAG/amd64 = -m64 |
| ARCHFLAG/ia64 = |
| ARCHFLAG/sparc = -m32 -mcpu=v9 |
| ARCHFLAG/sparcv9 = -m64 -mcpu=v9 |
| ARCHFLAG/arm = -fsigned-char |
| ARCHFLAG/zero = $(ZERO_ARCHFLAG) |
| ifndef E500V2 |
| ARCHFLAG/ppc = -mcpu=powerpc |
| endif |
| |
| CFLAGS += $(ARCHFLAG) |
| AOUT_FLAGS += $(ARCHFLAG) |
| LFLAGS += $(ARCHFLAG) |
| ASFLAGS += $(ARCHFLAG) |
| |
| ifdef E500V2 |
| CFLAGS += -DE500V2 |
| endif |
| |
| # Use C++ Interpreter |
| ifdef CC_INTERP |
| CFLAGS += -DCC_INTERP |
| endif |
| |
| # Build for embedded targets |
| ifdef JAVASE_EMBEDDED |
| CFLAGS += -DJAVASE_EMBEDDED |
| endif |
| |
| # Keep temporary files (.ii, .s) |
| ifdef NEED_ASM |
| CFLAGS += -save-temps |
| else |
| CFLAGS += -pipe |
| endif |
| |
| # Compiler warnings are treated as errors |
| WARNINGS_ARE_ERRORS = -Werror |
| |
| # Except for a few acceptable ones |
| # Since GCC 4.3, -Wconversion has changed its meanings to warn these implicit |
| # conversions which might affect the values. To avoid that, we need to turn |
| # it off explicitly. |
| ifneq "$(shell expr \( $(CC_VER_MAJOR) \> 4 \) \| \( \( $(CC_VER_MAJOR) = 4 \) \& \( $(CC_VER_MINOR) \>= 3 \) \))" "0" |
| ACCEPTABLE_WARNINGS = -Wpointer-arith -Wsign-compare |
| else |
| ACCEPTABLE_WARNINGS = -Wpointer-arith -Wconversion -Wsign-compare |
| endif |
| |
| CFLAGS_WARN/DEFAULT = $(WARNINGS_ARE_ERRORS) $(ACCEPTABLE_WARNINGS) |
| # Special cases |
| CFLAGS_WARN/BYFILE = $(CFLAGS_WARN/$@)$(CFLAGS_WARN/DEFAULT$(CFLAGS_WARN/$@)) |
| |
| # The flags to use for an Optimized g++ build |
| OPT_CFLAGS += -O3 |
| |
| # Hotspot uses very unstrict aliasing turn this optimization off |
| OPT_CFLAGS += -fno-strict-aliasing |
| |
| # The gcc compiler segv's on ia64 when compiling bytecodeInterpreter.cpp |
| # if we use expensive-optimizations |
| ifeq ($(BUILDARCH), ia64) |
| OPT_CFLAGS += -fno-expensive-optimizations |
| endif |
| |
| OPT_CFLAGS/NOOPT=-O0 |
| |
| # 6835796. Problem in GCC 4.3.0 with mulnode.o optimized compilation. |
| ifneq "$(shell expr \( \( $(CC_VER_MAJOR) = 4 \) \& \( $(CC_VER_MINOR) = 3 \) \))" "0" |
| OPT_CFLAGS/mulnode.o += -O0 |
| endif |
| |
| #------------------------------------------------------------------------ |
| # Linker flags |
| |
| # statically link libstdc++.so, work with gcc but ignored by g++ |
| STATIC_STDCXX = -Wl,-Bstatic -lstdc++ -Wl,-Bdynamic |
| |
| # statically link libgcc and/or libgcc_s, libgcc does not exist before gcc-3.x. |
| ifneq ("${CC_VER_MAJOR}", "2") |
| STATIC_LIBGCC += -static-libgcc |
| endif |
| |
| ifeq ($(BUILDARCH), ia64) |
| LFLAGS += -Wl,-relax |
| endif |
| |
| # Enable linker optimization |
| LFLAGS += -Xlinker -O1 |
| |
| # If this is a --hash-style=gnu system, use --hash-style=both |
| # The gnu .hash section won't work on some Linux systems like SuSE 10. |
| _HAS_HASH_STYLE_GNU:=$(shell $(CC) -dumpspecs | grep -- '--hash-style=gnu') |
| ifneq ($(_HAS_HASH_STYLE_GNU),) |
| LDFLAGS_HASH_STYLE = -Wl,--hash-style=both |
| endif |
| LFLAGS += $(LDFLAGS_HASH_STYLE) |
| |
| # Use $(MAPFLAG:FILENAME=real_file_name) to specify a map file. |
| MAPFLAG = -Xlinker --version-script=FILENAME |
| |
| # Use $(SONAMEFLAG:SONAME=soname) to specify the intrinsic name of a shared obj |
| SONAMEFLAG = -Xlinker -soname=SONAME |
| |
| # Build shared library |
| SHARED_FLAG = -shared |
| |
| # Keep symbols even they are not used |
| AOUT_FLAGS += -export-dynamic |
| |
| #------------------------------------------------------------------------ |
| # Debug flags |
| |
| # Use the stabs format for debugging information (this is the default |
| # on gcc-2.91). It's good enough, has all the information about line |
| # numbers and local variables, and libjvm_g.so is only about 16M. |
| # Change this back to "-g" if you want the most expressive format. |
| # (warning: that could easily inflate libjvm_g.so to 150M!) |
| # Note: The Itanium gcc compiler crashes when using -gstabs. |
| DEBUG_CFLAGS/ia64 = -g |
| DEBUG_CFLAGS/amd64 = -g |
| DEBUG_CFLAGS/arm = -g |
| DEBUG_CFLAGS/ppc = -g |
| DEBUG_CFLAGS += $(DEBUG_CFLAGS/$(BUILDARCH)) |
| ifeq ($(DEBUG_CFLAGS/$(BUILDARCH)),) |
| DEBUG_CFLAGS += -gstabs |
| endif |
| |
| # DEBUG_BINARIES overrides everything, use full -g debug information |
| ifeq ($(DEBUG_BINARIES), true) |
| DEBUG_CFLAGS = -g |
| CFLAGS += $(DEBUG_CFLAGS) |
| endif |
| |
| # If we are building HEADLESS, pass on to VM |
| # so it can set the java.awt.headless property |
| ifdef HEADLESS |
| CFLAGS += -DHEADLESS |
| endif |
| |
| # We are building Embedded for a small device |
| # favor code space over speed |
| ifdef MINIMIZE_RAM_USAGE |
| CFLAGS += -DMINIMIZE_RAM_USAGE |
| endif |