gdb-9.1/gdb/po/gdb.pot

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR Free Software Foundation, Inc.
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-02-08 16:54+0400\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: 8bit\n"

#: aarch64-fbsd-nat.c:71 aarch64-fbsd-nat.c:103 alpha-bsd-nat.c:103
#: alpha-bsd-nat.c:134 amd64-bsd-nat.c:55 amd64-bsd-nat.c:131
#: amd64-fbsd-nat.c:172 amd64-linux-nat.c:225 amd64-linux-nat.c:309
#: arm-fbsd-nat.c:74 arm-fbsd-nat.c:107 hppa-nbsd-nat.c:180 hppa-nbsd-nat.c:209
#: hppa-obsd-nat.c:206 hppa-obsd-nat.c:233 i386-bsd-nat.c:140
#: i386-bsd-nat.c:230 i386-linux-nat.c:223 i386-linux-nat.c:238
#: m32r-linux-nat.c:121 m32r-linux-nat.c:170 m68k-bsd-nat.c:127
#: m68k-bsd-nat.c:156 m68k-linux-nat.c:268 m68k-linux-nat.c:283
#: mips-fbsd-nat.c:74 mips-fbsd-nat.c:105 mips-linux-nat.c:286
#: mips-linux-nat.c:367 mips-nbsd-nat.c:60 mips-nbsd-nat.c:90
#: mips64-obsd-nat.c:95 mips64-obsd-nat.c:110 ppc-fbsd-nat.c:133
#: ppc-fbsd-nat.c:159 ppc-nbsd-nat.c:98 ppc-nbsd-nat.c:127 ppc-obsd-nat.c:88
#: ppc-obsd-nat.c:122 riscv-fbsd-nat.c:75 riscv-fbsd-nat.c:107
#: riscv-linux-nat.c:217 riscv-linux-nat.c:235 riscv-linux-nat.c:272
#: riscv-linux-nat.c:296 s390-linux-nat.c:281 s390-linux-nat.c:298
#: sh-nbsd-nat.c:62 sh-nbsd-nat.c:84 sparc-nat.c:170 sparc-nat.c:203
#: tilegx-linux-nat.c:143 tilegx-linux-nat.c:159 vax-bsd-nat.c:80
#: vax-bsd-nat.c:95 xtensa-linux-nat.c:211 xtensa-linux-nat.c:230
msgid "Couldn't get registers"
msgstr ""

#: aarch64-fbsd-nat.c:82 aarch64-fbsd-nat.c:117 alpha-bsd-nat.c:117
#: alpha-bsd-nat.c:153 amd64-bsd-nat.c:108 amd64-bsd-nat.c:196
#: amd64-linux-nat.c:258 amd64-linux-nat.c:344 arm-fbsd-nat.c:86
#: arm-fbsd-nat.c:122 hppa-nbsd-nat.c:190 hppa-nbsd-nat.c:222
#: hppa-obsd-nat.c:216 hppa-obsd-nat.c:246 i386-bsd-nat.c:208
#: i386-bsd-nat.c:310 i386-linux-nat.c:287 i386-linux-nat.c:301
#: m68k-bsd-nat.c:137 m68k-bsd-nat.c:169 m68k-linux-nat.c:362
#: m68k-linux-nat.c:376 mips-fbsd-nat.c:84 mips-fbsd-nat.c:119
#: mips-nbsd-nat.c:73 mips-nbsd-nat.c:107 ppc-obsd-nat.c:104 ppc-obsd-nat.c:141
#: riscv-fbsd-nat.c:86 riscv-fbsd-nat.c:121 s390-linux-nat.c:318
#: s390-linux-nat.c:335 sparc-nat.c:182
msgid "Couldn't get floating point status"
msgstr ""

#: aarch64-fbsd-nat.c:109 alpha-bsd-nat.c:140 amd64-bsd-nat.c:136
#: amd64-linux-nat.c:314 arm-fbsd-nat.c:113 hppa-nbsd-nat.c:214
#: hppa-obsd-nat.c:238 i386-bsd-nat.c:235 i386-linux-nat.c:243
#: m32r-linux-nat.c:175 m68k-bsd-nat.c:161 m68k-linux-nat.c:288
#: mips-fbsd-nat.c:111 mips-nbsd-nat.c:95 mips64-obsd-nat.c:115
#: ppc-fbsd-nat.c:164 ppc-nbsd-nat.c:133 ppc-obsd-nat.c:132
#: riscv-fbsd-nat.c:113 s390-linux-nat.c:303 sparc-nat.c:208
#: tilegx-linux-nat.c:164 vax-bsd-nat.c:100 xtensa-linux-nat.c:238
msgid "Couldn't write registers"
msgstr ""

#: aarch64-fbsd-nat.c:123 alpha-bsd-nat.c:159 amd64-bsd-nat.c:201
#: amd64-linux-nat.c:349 arm-fbsd-nat.c:128 hppa-nbsd-nat.c:227
#: hppa-obsd-nat.c:251 i386-bsd-nat.c:315 i386-linux-nat.c:306
#: m68k-bsd-nat.c:174 m68k-linux-nat.c:381 mips-fbsd-nat.c:125
#: mips-nbsd-nat.c:112 ppc-obsd-nat.c:147 riscv-fbsd-nat.c:127
#: s390-linux-nat.c:340
msgid "Couldn't write floating point status"
msgstr ""

#: aarch64-linux-nat.c:231 aarch64-linux-nat.c:268 arm-linux-nat.c:227
#: arm-linux-nat.c:255
msgid "Unable to fetch general registers."
msgstr ""

#: aarch64-linux-nat.c:283 arm-linux-nat.c:272
msgid "Unable to store general registers."
msgstr ""

#: aarch64-linux-nat.c:311 aarch64-linux-nat.c:357 arm-linux-nat.c:359
msgid "Unable to fetch VFP registers."
msgstr ""

#: aarch64-linux-nat.c:323
msgid "Unable to fetch vFP/SIMD registers."
msgstr ""

#: aarch64-linux-nat.c:369
msgid "Unable to fetch FP/SIMD registers."
msgstr ""

#: aarch64-linux-nat.c:386 arm-linux-nat.c:405
msgid "Unable to store VFP registers."
msgstr ""

#: aarch64-linux-nat.c:392
msgid "Unable to store FP/SIMD registers."
msgstr ""

#: aarch64-linux-nat.c:420
msgid "Unable to set VG register."
msgstr ""

#: aarch64-linux-nat.c:434
msgid "Unable to store sve registers"
msgstr ""

#: aarch64-linux-nat.c:454
msgid "unable to fetch pauth registers."
msgstr ""

#: aarch64-linux-nat.c:986
msgid "Set whether to show variables that mirror the AArch64 debug registers."
msgstr ""

#: aarch64-linux-nat.c:987
msgid "Show whether to show variables that mirror the AArch64 debug registers."
msgstr ""

#: aarch64-linux-nat.c:988 mips-linux-nat.c:792 x86-nat.c:280
msgid ""
"Use \"on\" to enable, \"off\" to disable.\n"
"If enabled, the debug registers values are shown when GDB inserts\n"
"or removes a hardware breakpoint or watchpoint, and when the inferior\n"
"triggers a breakpoint or watchpoint."
msgstr ""

#: aarch64-linux-tdep.c:251
#, possible-c-format
msgid "Invalid vector length in signal frame %d vs %s."
msgstr ""

#: aarch64-linux-tdep.c:456
msgid "'.reg-aarch-sve' section in core file too small."
msgstr ""

#: aarch64-linux-tdep.c:462
msgid "Couldn't read sve header from '.reg-aarch-sve' section in core file."
msgstr ""

#: aarch64-linux-tdep.c:473
#, possible-c-format
msgid ""
"SVE Vector length in core file not supported by this version of GDB.  (VQ=%s)"
msgstr ""

#: aarch64-linux-tdep.c:479
#, possible-c-format
msgid "SVE Vector length in core file is invalid. (VQ=%s"
msgstr ""

#: aarch64-linux-tdep.c:714 arm-linux-tdep.c:1204 i386-tdep.c:4133
#: i386-tdep.c:4242 i386-tdep.c:4257 ppc-linux-tdep.c:1710 stap-probe.c:775
#, possible-c-format
msgid "Invalid register name `%s' on expression `%s'."
msgstr ""

#: aarch64-linux-tdep.c:1394 amd64-linux-tdep.c:1498 arm-linux-tdep.c:1666
#: i386-linux-tdep.c:468 s390-linux-tdep.c:817
#, possible-c-format
msgid "Process record and replay target doesn't support syscall number %s\n"
msgstr ""

#: aarch64-tdep.c:215
#, possible-c-format
msgid "AArch64 debugging is %s.\n"
msgstr ""

#: aarch64-tdep.c:1120 arm-tdep.c:3077
#, possible-c-format
msgid "Unexpected register %d"
msgstr ""

#: aarch64-tdep.c:2432
#, possible-c-format
msgid "aarch64_pseudo_register_name: bad register number %d"
msgstr ""

#: aarch64-tdep.c:2468
#, possible-c-format
msgid "aarch64_pseudo_register_type: bad register number %d"
msgstr ""

#: aarch64-tdep.c:3082 gdbserver/linux-aarch64-tdesc.c:35
#, possible-c-format
msgid "VQ is %<PRIu64>, maximum supported value is %d"
msgstr ""

#: aarch64-tdep.c:3173
#, possible-c-format
msgid "VQ out of bounds: %s (max %d)"
msgstr ""

#: aarch64-tdep.c:3216
msgid "Program contains both fpu and SVE features."
msgstr ""

#: aarch64-tdep.c:3398
#, possible-c-format
msgid "aarch64_dump_tdep: Lowest pc = 0x%s"
msgstr ""

#. Debug this file's internals.
#: aarch64-tdep.c:3416
msgid "Set AArch64 debugging."
msgstr ""

#: aarch64-tdep.c:3417
msgid "Show AArch64 debugging."
msgstr ""

#: aarch64-tdep.c:3418
msgid "When on, AArch64 specific debugging is enabled."
msgstr ""

#. We need to save SPSR value, which is not yet done.
#: aarch64-tdep.c:4394 arm-tdep.c:11052 arm-tdep.c:12071
#, possible-c-format
msgid "Process record does not support instruction 0x%0x at address %s.\n"
msgstr ""

#: ada-exp.y:217
msgid "Invalid conversion"
msgstr ""

#: ada-exp.y:235
msgid "Type required for qualification"
msgstr ""

#: ada-exp.y:253
msgid "Cannot slice a type"
msgstr ""

#: ada-exp.y:321
msgid "Type required within braces in coercion"
msgstr ""

#: ada-exp.y:391 ada-exp.y:409
msgid "Right operand of 'in' must be type"
msgstr ""

#: ada-exp.y:523
msgid "Prefix must be type"
msgstr ""

#: ada-exp.y:576
msgid "NEW not implemented."
msgstr ""

#: ada-exp.y:747
#, possible-c-format
msgid "Error in expression, near `%s'."
msgstr ""

#: ada-exp.y:810
msgid "Could not find renamed symbol"
msgstr ""

#: ada-exp.y:819
#, possible-c-format
msgid "Could not find renamed variable: %s"
msgstr ""

#: ada-exp.y:891
#, possible-c-format
msgid "Could not find %s"
msgstr ""

#: ada-exp.y:944
msgid "Internal error in encoding of renaming declaration"
msgstr ""

#: ada-exp.y:977 c-exp.y:961 p-exp.y:630
#, possible-c-format
msgid "No file or function \"%s\"."
msgstr ""

#: ada-exp.y:979 c-exp.y:978 m2-exp.y:523 p-exp.y:644
#, possible-c-format
msgid "No function \"%s\" in specified context."
msgstr ""

#: ada-exp.y:984
#, possible-c-format
msgid "Function name \"%s\" ambiguous here"
msgstr ""

#: ada-exp.y:1262
msgid "impossible value from ada_parse_renaming"
msgstr ""

#: ada-exp.y:1280
#, possible-c-format
msgid "Invalid attempt to select from type: \"%s\"."
msgstr ""

#: ada-exp.y:1313
#, possible-c-format
msgid "No definition of \"%s\" found."
msgstr ""

#: ada-exp.y:1327 c-exp.y:1087 c-exp.y:1140 cli/cli-cmds.c:1165 d-exp.y:493
#: f-exp.y:506 go-exp.y:579 linespec.c:1623 linespec.c:3824 p-exp.y:707
#: p-exp.y:766 source.c:214 symtab.c:4305
msgid "No symbol table is loaded.  Use the \"file\" command."
msgstr ""

#: ada-exp.y:1329
#, possible-c-format
msgid "No definition of \"%s\" in current context."
msgstr ""

#: ada-exp.y:1331
#, possible-c-format
msgid "No definition of \"%s\" in specified context."
msgstr ""

#: ada-exp.y:1336
#, possible-c-format
msgid "Could not find renamed symbol \"%s\""
msgstr ""

#: ada-exp.y:1372
msgid "Invalid use of type."
msgstr ""

#: ada-lang.c:599
#, possible-c-format
msgid "Unable to find field %s in struct %s.  Aborting"
msgstr ""

#: ada-lang.c:720
msgid "object size is larger than varsize-limit"
msgstr ""

#: ada-lang.c:785
msgid "Unexpected type in ada_discrete_type_high_bound."
msgstr ""

#: ada-lang.c:806
msgid "Unexpected type in ada_discrete_type_low_bound."
msgstr ""

#: ada-lang.c:904
msgid "Invalid address for Ada main program name."
msgstr ""

#: ada-lang.c:986
#, possible-c-format
msgid "invalid Ada operator name: %s"
msgstr ""

#: ada-lang.c:1647 ada-lang.c:1665 ada-lang.c:1679 ada-lang.c:1747
msgid "Bad GNAT array descriptor"
msgstr ""

#: ada-lang.c:1784
msgid "Bad GNAT array descriptor bounds"
msgstr ""

#: ada-lang.c:2028
msgid "Bounds unavailable for null array pointer."
msgstr ""

#: ada-lang.c:2117
msgid "could not understand bit size information on packed array"
msgstr ""

#: ada-lang.c:2215
msgid "could not find bounds information on packed array"
msgstr ""

#: ada-lang.c:2222
msgid "could not understand bounds information on packed array"
msgstr ""

#: ada-lang.c:2256
msgid "can't unpack array"
msgstr ""

#: ada-lang.c:2309
msgid "attempt to do packed indexing of something other than a packed array"
msgstr ""

#: ada-lang.c:2319
msgid "don't know bounds of array"
msgstr ""

#: ada-lang.c:2325
#, possible-c-format
msgid "packed array index %ld out of bounds"
msgstr ""

#: ada-lang.c:2397
#, possible-c-format
msgid "Cannot unpack %d bits into buffer of %d bytes"
msgstr ""

#: ada-lang.c:2626 ada-lang.c:9814 valops.c:990
msgid "Left operand of assignment is not a modifiable lvalue."
msgstr ""

#: ada-lang.c:2748 ada-lang.c:2806
#, possible-c-format
msgid "too many subscripts (%d expected)"
msgstr ""

#: ada-lang.c:2841 ada-lang.c:2869
msgid "unable to get positions in slice, use bounds instead"
msgstr ""

#: ada-lang.c:2964
#, possible-c-format
msgid "invalid dimension number to '%s"
msgstr ""

#: ada-lang.c:2983
msgid "attempt to take bound of something that is not an array"
msgstr ""

#: ada-lang.c:3147
msgid "Could not find operator name for opcode"
msgstr ""

#: ada-lang.c:3288 ada-lang.c:3301 linespec.c:1562
msgid "one or more choice numbers"
msgstr ""

#: ada-lang.c:3308
msgid "Argument must be choice number"
msgstr ""

#: ada-lang.c:3312
msgid "cancelled"
msgstr ""

#: ada-lang.c:3339
#, possible-c-format
msgid "Select no more than %d of the above"
msgstr ""

#: ada-lang.c:3362
msgid "Request to select 0 symbols!"
msgstr ""

#: ada-lang.c:3367 linespec.c:1541
msgid ""
"canceled because the command is ambiguous\n"
"See set/show multiple-symbol."
msgstr ""

#: ada-lang.c:3377
msgid "[0] cancel\n"
msgstr ""

#: ada-lang.c:3379
msgid "[1] all\n"
msgstr ""

#: ada-lang.c:3397
#, possible-c-format
msgid " at %p[<no source file available>%p]:%d\n"
msgstr ""

#: ada-lang.c:3401
#, possible-c-format
msgid " at %ps:%d\n"
msgstr ""

#: ada-lang.c:3423
#, possible-c-format
msgid " at %s:%d\n"
msgstr ""

#: ada-lang.c:3433
#, possible-c-format
msgid "'(%s) (enumeral)\n"
msgstr ""

#: ada-lang.c:3444
#, possible-c-format
msgid " in %s (enumeral)\n"
msgstr ""

#: ada-lang.c:3445
#, possible-c-format
msgid " at %s:?\n"
msgstr ""

#: ada-lang.c:3449
msgid " (enumeral)\n"
msgstr ""

#: ada-lang.c:3450
msgid " at ?\n"
msgstr ""

#: ada-lang.c:3655
msgid "Unexpected operator during name resolution"
msgstr ""

#: ada-lang.c:3719
#, possible-c-format
msgid "No definition found for %s"
msgstr ""

#: ada-lang.c:3731 ada-lang.c:3781
#, possible-c-format
msgid "Could not find a match for %s"
msgstr ""

#: ada-lang.c:3736 ada-lang.c:4025
#, possible-c-format
msgid "Multiple matches for %s\n"
msgstr ""

#: ada-lang.c:4459 valops.c:2162
#, possible-c-format
msgid "There is no member named %s."
msgstr ""

#: ada-lang.c:4465
msgid "Attempt to extract a component of a value that is not a record."
msgstr ""

#. PNH: Do we ever get here?  See ada_search_struct_field,
#. find_struct_field.
#: ada-lang.c:7491
msgid "Cannot assign this kind of variant record"
msgstr ""

#: ada-lang.c:7560
#, possible-c-format
msgid "Type %s is not a structure or union type"
msgstr ""

#: ada-lang.c:7561
msgid "(null)"
msgstr ""

#: ada-lang.c:7644 inferior.c:410
msgid "<null>"
msgstr ""

#: ada-lang.c:7646
#, possible-c-format
msgid "Type %s has no component named %s"
msgstr ""

#: ada-lang.c:7930
msgid "unexpected null name on descriptive type"
msgstr ""

#: ada-lang.c:8319
#, possible-c-format
msgid "Invalid type size for `%s' detected: %s."
msgstr ""

#: ada-lang.c:8322
#, possible-c-format
msgid "Invalid type size for <unnamed> detected: %s."
msgstr ""

#: ada-lang.c:8333
msgid "record type with dynamic size is larger than varsize-limit"
msgstr ""

#: ada-lang.c:8773
msgid "array type with dynamic size is larger than varsize-limit"
msgstr ""

#: ada-lang.c:8882
#, possible-c-format
msgid "unable to read value of %s (%s)"
msgstr ""

#: ada-lang.c:9171
msgid "'POS only defined on discrete types"
msgstr ""

#: ada-lang.c:9174
msgid "enumeration value is invalid: can't find 'POS"
msgstr ""

#: ada-lang.c:9191
msgid "'VAL only defined on discrete types"
msgstr ""

#: ada-lang.c:9193
msgid "'VAL requires integral argument"
msgstr ""

#: ada-lang.c:9200
msgid "argument to 'VAL out of range"
msgstr ""

#: ada-lang.c:9526 ada-lang.c:9564
msgid "unable to determine array bounds"
msgstr ""

#: ada-lang.c:9605
msgid "cannot assign arrays of different length"
msgstr ""

#: ada-lang.c:9619
msgid "Incompatible types in assignment"
msgstr ""

#: ada-lang.c:9653
#, possible-c-format
msgid "second operand of %s must not be zero."
msgstr ""

#: ada-lang.c:9704
msgid "Attempt to compare array with non-array"
msgstr ""

#: ada-lang.c:9830
msgid "Left-hand side must be array or record."
msgstr ""

#: ada-lang.c:9855
msgid "Misplaced 'others' clause"
msgstr ""

#: ada-lang.c:9860
msgid "Internal error: bad aggregate clause"
msgstr ""

#: ada-lang.c:9882
msgid "Extra components in aggregate ignored."
msgstr ""

#: ada-lang.c:9949
msgid "Invalid record component association."
msgstr ""

#: ada-lang.c:9955
#, possible-c-format
msgid "Unknown component name: %s."
msgstr ""

#: ada-lang.c:9960
msgid "Index in component association out of bounds."
msgstr ""

#: ada-lang.c:10036
msgid "Internal error: miscounted aggregate components."
msgstr ""

#: ada-lang.c:10460
msgid "Fixed-point values must be assigned to fixed-point variables"
msgstr ""

#: ada-lang.c:10481
msgid "Operands of fixed-point addition must have the same type"
msgstr ""

#: ada-lang.c:10507
msgid "Operands of fixed-point subtraction must have the same type"
msgstr ""

#. Only encountered when an unresolved symbol occurs in a
#. context other than a function call, in which case, it is
#. invalid.
#: ada-lang.c:10610 ada-lang.c:10700
#, possible-c-format
msgid "Unexpected unresolved symbol, %s, during evaluation"
msgstr ""

#: ada-lang.c:10756
#, possible-c-format
msgid "cannot subscript or call something of type `%s'"
msgstr ""

#: ada-lang.c:10792
msgid "cannot subscript or call a record"
msgstr ""

#: ada-lang.c:10794
#, possible-c-format
msgid "wrong number of subscripts; expecting %d"
msgstr ""

#: ada-lang.c:10806 ada-lang.c:10820
msgid "element type of array unknown"
msgstr ""

#: ada-lang.c:10829
msgid "Attempt to index or call something other than an array or function"
msgstr ""

#: ada-lang.c:10859
msgid "cannot slice a packed array"
msgstr ""

#: ada-lang.c:10888 valops.c:3809
msgid "cannot take slice of non-array"
msgstr ""

#: ada-lang.c:10927
msgid "Membership test incompletely implemented; always returns true"
msgstr ""

#: ada-lang.c:11016
#, possible-c-format
msgid "Invalid operand to '%s"
msgstr ""

#. Should never happen.
#: ada-lang.c:11035 ada-lang.c:11069 ada-lang.c:11094 ada-lang.c:11126
msgid "unexpected attribute encountered"
msgstr ""

#: ada-lang.c:11102
msgid "the 'length attribute applies only to array types"
msgstr ""

#: ada-lang.c:11106
msgid "unimplemented type attribute"
msgstr ""

#: ada-lang.c:11176
msgid "'modulus must be applied to modular type"
msgstr ""

#: ada-lang.c:11273
msgid "Attempt to dereference null array pointer."
msgstr ""

#: ada-lang.c:11317 eval.c:2689 eval.c:3178 valops.c:1578
msgid "Attempt to take contents of a non-pointer value."
msgstr ""

#: ada-lang.c:11396 eval.c:2900
msgid "Attempt to use a type name as an expression"
msgstr ""

#: ada-lang.c:11408
#, possible-c-format
msgid ""
"Undefined name, ambiguous name, or renaming used in component association: "
"%s."
msgstr ""

#: ada-lang.c:11411
msgid "Aggregates only allowed on the right of an assignment"
msgstr ""

#: ada-lang.c:11414
msgid "aggregate apparently mangled"
msgstr ""

#: ada-lang.c:11692
msgid "Unknown lower bound, using 1."
msgstr ""

#: ada-lang.c:11708
#, possible-c-format
msgid "Unknown upper bound, using %ld."
msgstr ""

#: ada-lang.c:11912 ada-lang.c:11935
msgid ""
"Your Ada runtime appears to be missing some debugging information.\n"
"Cannot insert Ada exception catchpoint in this configuration."
msgstr ""

#: ada-lang.c:11923 ada-lang.c:11946
#, possible-c-format
msgid "Symbol \"%s\" is not a function (class = %d)"
msgstr ""

#: ada-lang.c:11997
msgid "Unable to insert catchpoint.  Is this an Ada main program?"
msgstr ""

#: ada-lang.c:12005
msgid "Unable to insert catchpoint. Try to start the program first."
msgstr ""

#. At this point, we know that we are debugging an Ada program and
#. that the inferior has been started, but we still are not able to
#. find the run-time symbols.  That can mean that we are in
#. configurable run time mode, or that a-except as been optimized
#. out by the linker...  In any case, at this point it is not worth
#. supporting this feature.
#: ada-lang.c:12014
msgid "Cannot insert Ada exception catchpoints in this configuration."
msgstr ""

#: ada-lang.c:12184 ada-lang.c:12619 ada-lang.c:12672 ada-lang.c:12706
msgid "unexpected catchpoint type"
msgstr ""

#: ada-lang.c:12269
#, possible-c-format
msgid "failed to get exception name: %s"
msgstr ""

#: ada-lang.c:12368
#, possible-c-format
msgid "failed to reevaluate internal exception condition for catchpoint %d: %s"
msgstr ""

#: ada-lang.c:12463
msgid "Error in testing exception condition:\n"
msgstr ""

#: ada-lang.c:12589 ada-lang.c:12643
#, possible-c-format
msgid "`%s' Ada exception"
msgstr ""

#: ada-lang.c:12607 ada-lang.c:12659
#, possible-c-format
msgid "`%s' Ada exception handlers"
msgstr ""

#: ada-lang.c:12633 break-catch-throw.c:315
msgid "Temporary catchpoint "
msgstr ""

#: ada-lang.c:12634
msgid "Catchpoint "
msgstr ""

#: ada-lang.c:12648
msgid "all Ada exceptions"
msgstr ""

#: ada-lang.c:12652
msgid "unhandled Ada exceptions"
msgstr ""

#: ada-lang.c:12664
msgid "all Ada exceptions handlers"
msgstr ""

#: ada-lang.c:12668
msgid "failed Ada assertions"
msgstr ""

#: ada-lang.c:12767
msgid "Condition missing after `if' keyword"
msgstr ""

#: ada-lang.c:12777 breakpoint.c:876 breakpoint.c:890
msgid "Junk at end of expression"
msgstr ""

#: ada-lang.c:12831 ada-lang.c:12857
#, possible-c-format
msgid "unexpected catchpoint kind (%d)"
msgstr ""

#: ada-lang.c:12946
#, possible-c-format
msgid "Catchpoint symbol not found: %s"
msgstr ""

#: ada-lang.c:12949
#, possible-c-format
msgid "Unable to insert catchpoint. %s is not a function."
msgstr ""

#: ada-lang.c:13083
msgid "condition missing after `if' keyword"
msgstr ""

#: ada-lang.c:13090 break-catch-throw.c:440 breakpoint.c:9131
#: breakpoint.c:11025 breakpoint.c:11157 breakpoint.c:11201 breakpoint.c:14795
msgid "Junk at end of arguments."
msgstr ""

#: ada-lang.c:13406
msgid "invalid regular expression"
msgstr ""

#: ada-lang.c:13421
#, possible-c-format
msgid "All Ada exceptions matching regular expression \"%s\":\n"
msgstr ""

#: ada-lang.c:13423
msgid "All defined Ada exceptions:\n"
msgstr ""

#. XXX: gdb_sprint_host_address, type_sprint
#: ada-lang.c:13603
msgid "Type @"
msgstr ""

#: ada-lang.c:14156
msgid "\"set ada\" must be followed by the name of a setting.\n"
msgstr ""

#: ada-lang.c:14239
msgid "Prefix command for changing Ada-specific settings."
msgstr ""

#: ada-lang.c:14243
msgid "Generic command for showing Ada-specific settings."
msgstr ""

#: ada-lang.c:14247
msgid "Enable or disable an optimization trusting PAD types over XVS types."
msgstr ""

#: ada-lang.c:14248
msgid ""
"Show whether an optimization trusting PAD types over XVS types is activated."
msgstr ""

#: ada-lang.c:14250
msgid ""
"This is related to the encoding used by the GNAT compiler.  The debugger\n"
"should normally trust the contents of PAD types, but certain older versions\n"
"of GNAT have a bug that sometimes causes the information in the PAD type\n"
"to be incorrect.  Turning this setting \"off\" allows the debugger to\n"
"work around this bug.  It is always safe to turn this option \"off\", but\n"
"this incurs a slight performance penalty, so it is recommended to NOT "
"change\n"
"this option to \"off\" unless necessary."
msgstr ""

#: ada-lang.c:14261
msgid ""
"Enable or disable the output of formal and return types for functions in the "
"overloads selection menu."
msgstr ""

#: ada-lang.c:14263
msgid ""
"Show whether the output of formal and return types for functions in the "
"overloads selection menu is activated."
msgstr ""

#: ada-lang.c:14268
msgid ""
"Catch Ada exceptions, when raised.\n"
"Usage: catch exception [ARG] [if CONDITION]\n"
"Without any argument, stop when any Ada exception is raised.\n"
"If ARG is \"unhandled\" (without the quotes), only stop when the exception\n"
"being raised does not have a handler (and will therefore lead to the task's\n"
"termination).\n"
"Otherwise, the catchpoint only stops when the name of the exception being\n"
"raised is the same as ARG.\n"
"CONDITION is a boolean expression that is evaluated to see whether the\n"
"exception should cause a stop."
msgstr ""

#: ada-lang.c:14284
msgid ""
"Catch Ada exceptions, when handled.\n"
"Usage: catch handlers [ARG] [if CONDITION]\n"
"Without any argument, stop when any Ada exception is handled.\n"
"With an argument, catch only exceptions with the given name.\n"
"CONDITION is a boolean expression that is evaluated to see whether the\n"
"exception should cause a stop."
msgstr ""

#: ada-lang.c:14295
msgid ""
"Catch failed Ada assertions, when raised.\n"
"Usage: catch assert [if CONDITION]\n"
"CONDITION is a boolean expression that is evaluated to see whether the\n"
"exception should cause a stop."
msgstr ""

#: ada-lang.c:14307
msgid "Set the maximum number of bytes allowed in a variable-size object."
msgstr ""

#: ada-lang.c:14308
msgid "Show the maximum number of bytes allowed in a variable-size object."
msgstr ""

#: ada-lang.c:14309
msgid ""
"Attempts to access an object whose size is not a compile-time constant\n"
"and exceeds this limit will cause an error."
msgstr ""

#: ada-lang.c:14315
msgid ""
"List all Ada exception names.\n"
"Usage: info exceptions [REGEXP]\n"
"If a regular expression is passed as an argument, only those matching\n"
"the regular expression are listed."
msgstr ""

#: ada-lang.c:14322
msgid "Set Ada maintenance-related variables."
msgstr ""

#: ada-lang.c:14327
msgid "Show Ada maintenance-related variables."
msgstr ""

#: ada-lang.c:14334
msgid "Set whether descriptive types generated by GNAT should be ignored."
msgstr ""

#: ada-lang.c:14335
msgid "Show whether descriptive types generated by GNAT should be ignored."
msgstr ""

#: ada-lang.c:14336
msgid ""
"When enabled, the debugger will stop using the DW_AT_GNAT_descriptive_type\n"
"DWARF attribute."
msgstr ""

#: ada-lex.l:143 ada-lex.l:147
msgid "Based real literals not implemented yet."
msgstr ""

#: ada-lex.l:170
msgid "ill-formed or non-terminated string literal"
msgstr ""

#: ada-lex.l:301
#, possible-c-format
msgid "Invalid character '%s' in expression."
msgstr ""

#: ada-lex.l:354
#, possible-c-format
msgid "Invalid base: %d."
msgstr ""

#: ada-lex.l:365 ada-lex.l:372
msgid "Integer literal out of range"
msgstr ""

#: ada-lex.l:367
#, possible-c-format
msgid "Invalid digit `%c' in based literal"
msgstr ""

#: ada-lex.l:612
#, possible-c-format
msgid "ambiguous attribute name: `%s'"
msgstr ""

#: ada-lex.l:615
#, possible-c-format
msgid "unrecognized attribute: `%s'"
msgstr ""

#: ada-tasks.c:68 ada-tasks.c:90
msgid "Unactivated"
msgstr ""

#: ada-tasks.c:69 ada-tasks.c:91
msgid "Runnable"
msgstr ""

#: ada-tasks.c:70 ada-tasks.c:92
msgid "Terminated"
msgstr ""

#: ada-tasks.c:71
msgid "Child Activation Wait"
msgstr ""

#: ada-tasks.c:72
msgid "Accept or Select Term"
msgstr ""

#: ada-tasks.c:73 ada-tasks.c:95
msgid "Waiting on entry call"
msgstr ""

#: ada-tasks.c:74
msgid "Async Select Wait"
msgstr ""

#: ada-tasks.c:75 ada-tasks.c:97
msgid "Delay Sleep"
msgstr ""

#: ada-tasks.c:76
msgid "Child Termination Wait"
msgstr ""

#: ada-tasks.c:77
msgid "Wait Child in Term Alt"
msgstr ""

#: ada-tasks.c:82 ada-tasks.c:104
msgid "Asynchronous Hold"
msgstr ""

#: ada-tasks.c:84 ada-tasks.c:106
msgid "Activating"
msgstr ""

#: ada-tasks.c:85
msgid "Selective Wait"
msgstr ""

#: ada-tasks.c:93
msgid "Waiting for child activation"
msgstr ""

#: ada-tasks.c:94
msgid "Blocked in accept or select with terminate"
msgstr ""

#: ada-tasks.c:96
msgid "Asynchronous Selective Wait"
msgstr ""

#: ada-tasks.c:98
msgid "Waiting for children termination"
msgstr ""

#: ada-tasks.c:99
msgid "Waiting for children in terminate alternative"
msgstr ""

#: ada-tasks.c:107
msgid "Blocked in selective wait statement"
msgstr ""

#: ada-tasks.c:437
msgid "Unknown task name format. Aborting"
msgstr ""

#: ada-tasks.c:511
msgid "Cannot find Ada_Task_Control_Block type"
msgstr ""

#: ada-tasks.c:524
msgid "Cannot find Common_ATCB type"
msgstr ""

#: ada-tasks.c:526
msgid "Cannot find Private_Data type"
msgstr ""

#: ada-tasks.c:528
msgid "Cannot find Entry_Call_Record type"
msgstr ""

#: ada-tasks.c:632
#, possible-c-format
msgid "%s. Aborting"
msgstr ""

#: ada-tasks.c:1001
msgid "Cannot inspect Ada tasks when program is not running"
msgstr ""

#: ada-tasks.c:1027 ada-tasks.c:1196 ada-tasks.c:1372
msgid "Your application does not use any Ada tasks.\n"
msgstr ""

#: ada-tasks.c:1156
#, possible-c-format
msgid "Accepting RV with %-4d"
msgstr ""

#: ada-tasks.c:1161
#, possible-c-format
msgid "Waiting on RV with %-3d"
msgstr ""

#: ada-tasks.c:1177
msgid "<no name>"
msgstr ""

#: ada-tasks.c:1201 ada-tasks.c:1321
#, possible-c-format
msgid ""
"Task ID %d not known.  Use the \"info tasks\" command to\n"
"see the IDs of currently known tasks"
msgstr ""

#. Print the Ada task ID.
#: ada-tasks.c:1206
#, possible-c-format
msgid "Ada Task: %s\n"
msgstr ""

#: ada-tasks.c:1211
#, possible-c-format
msgid "Name: %s\n"
msgstr ""

#: ada-tasks.c:1213
msgid "<no name>\n"
msgstr ""

#. Print the TID and LWP.
#: ada-tasks.c:1216
#, possible-c-format
msgid "Thread: %#lx\n"
msgstr ""

#: ada-tasks.c:1217
#, possible-c-format
msgid "LWP: %#lx\n"
msgstr ""

#: ada-tasks.c:1221
#, possible-c-format
msgid "Base CPU: %d\n"
msgstr ""

#: ada-tasks.c:1230
#, possible-c-format
msgid "Parent: %d"
msgstr ""

#: ada-tasks.c:1236
msgid "No parent\n"
msgstr ""

#. Print the base priority.
#: ada-tasks.c:1239
#, possible-c-format
msgid "Base Priority: %d\n"
msgstr ""

#: ada-tasks.c:1248
#, possible-c-format
msgid "State: Accepting rendezvous with %d"
msgstr ""

#: ada-tasks.c:1254
#, possible-c-format
msgid "State: Waiting on task %d's entry"
msgstr ""

#: ada-tasks.c:1258
#, possible-c-format
msgid "State: %s"
msgstr ""

#: ada-tasks.c:1298
msgid "[Current task is unknown]\n"
msgstr ""

#: ada-tasks.c:1305
#, possible-c-format
msgid "[Current task is %s]\n"
msgstr ""

#: ada-tasks.c:1326
#, possible-c-format
msgid "Cannot switch to task %s: Task is no longer running"
msgstr ""

#: ada-tasks.c:1348
#, possible-c-format
msgid ""
"Unable to compute thread ID for task %s.\n"
"Cannot switch to this task."
msgstr ""

#: ada-tasks.c:1354
#, possible-c-format
msgid "[Switching to task %s]\n"
msgstr ""

#: ada-tasks.c:1467
msgid "Provide information about all known Ada tasks."
msgstr ""

#: ada-tasks.c:1469
msgid ""
"Use this command to switch between Ada tasks.\n"
"Without argument, this command simply prints the current task ID."
msgstr ""

#: ada-typeprint.c:388
msgid "<undecipherable array type>"
msgstr ""

#: ada-typeprint.c:719
msgid " <incomplete type> end record"
msgstr ""

#: ada-typeprint.c:893
#, possible-c-format
msgid "<%s-byte integer>"
msgstr ""

#: ada-typeprint.c:916
#, possible-c-format
msgid "<%s-byte float>"
msgstr ""

#: ada-typeprint.c:930
msgid "array (?) of ? (<mal-formed descriptor>)"
msgstr ""

#: ada-valprint.c:165 valprint.c:2010
msgid "unable to get positions in array, use bounds instead"
msgstr ""

#: ada-valprint.c:237 ada-valprint.c:528
#, possible-c-format
msgid " %p[<repeats %u times>%p]"
msgstr ""

#: ada-valprint.c:460
msgid "internal error: unhandled type in ada_print_scalar"
msgstr ""

#: ada-valprint.c:464 typeprint.c:677
msgid "Invalid type code in symbol table."
msgstr ""

#: ada-valprint.c:673
msgid "<optimized out or zero length>"
msgstr ""

#: ada-valprint.c:1217 cp-valprint.c:314 guile/scm-pretty-print.c:631
#: mi/mi-cmd-stack.c:536 mi/mi-cmd-stack.c:550 python/py-prettyprint.c:267
#: python/py-framefilter.c:401 stack.c:456 stack.c:493
#, possible-c-format
msgid "<error reading variable: %s>"
msgstr ""

#. Could not get the array bounds.  Pretend this is an empty array.
#: ada-varobj.c:251 valprint.c:2027
msgid "unable to get bounds of array, assuming null array"
msgstr ""

#: addrmap.c:168
msgid "addrmap_create_fixed is not implemented yet for fixed addrmaps"
msgstr ""

#: addrmap.c:396
msgid "addrmap_find is not implemented yet for mutable addrmaps"
msgstr ""

#: addrmap.c:469
msgid "addrmap_relocate is not implemented yet for mutable addrmaps"
msgstr ""

#: agent.c:44
#, possible-c-format
msgid "Debugger's willingness to use agent in inferior as a helper is %s.\n"
msgstr ""

#: agent.c:84
msgid "Set debugger's willingness to use agent as a helper."
msgstr ""

#: agent.c:85
msgid "Show debugger's willingness to use agent as a helper."
msgstr ""

#: agent.c:86
msgid ""
"If on, GDB will delegate some of the debugging operations to the\n"
"agent, if the target supports it.  This will speed up those\n"
"operations that are supported by the agent.\n"
"If off, GDB will not use agent, even if such is supported by the\n"
"target."
msgstr ""

#: aix-thread.c:113 aix-thread.c:114
msgid "AIX pthread support"
msgstr ""

#: aix-thread.c:276
#, possible-c-format
msgid "aix-thread: ptrace (%d, %d) returned %d (errno = %d %s)"
msgstr ""

#. i18n: Like "Thread-Id %d, [state] idle"
#: aix-thread.c:606
msgid "idle"
msgstr ""

#. i18n: Like "Thread-Id %d, [state] running"
#: aix-thread.c:609
msgid "running"
msgstr ""

#. i18n: Like "Thread-Id %d, [state] sleeping"
#: aix-thread.c:612
msgid "sleeping"
msgstr ""

#. i18n: Like "Thread-Id %d, [state] ready"
#: aix-thread.c:615
msgid "ready"
msgstr ""

#. i18n: Like "Thread-Id %d, [state] finished"
#: aix-thread.c:618
msgid "finished"
msgstr ""

#. i18n: Like "Thread-Id %d, [state] unknown"
#: aix-thread.c:621 btrace.c:1884 source.c:668
msgid "unknown"
msgstr ""

#: aix-thread.c:1048
#, possible-c-format
msgid "aix-thread resume: unknown pthread %ld"
msgstr ""

#: aix-thread.c:1055
#, possible-c-format
msgid "aix-thread resume: no tid for pthread %ld"
msgstr ""

#: aix-thread.c:1225
#, possible-c-format
msgid "aix-thread: fetch_registers: pthdb_pthread_context returned %s"
msgstr ""

#: aix-thread.c:1508
#, possible-c-format
msgid "aix-thread: store_registers: pthdb_pthread_context returned %s"
msgstr ""

#: aix-thread.c:1566
#, possible-c-format
msgid "aix-thread: store_registers: pthdb_pthread_setcontext returned %s"
msgstr ""

#: aix-thread.c:1755
#, possible-c-format
msgid "Thread %ld"
msgstr ""

#. i18n: Like "thread-identifier %d, [state] running, suspended"
#: aix-thread.c:1784
#, c-format
msgid "tid %d"
msgstr ""

#. i18n: Like "Thread-Id %d, [state] running, suspended"
#: aix-thread.c:1795
#, c-format
msgid ", suspended"
msgstr ""

#. i18n: Like "Thread-Id %d, [state] running, detached"
#: aix-thread.c:1801
#, c-format
msgid ", detached"
msgstr ""

#. i18n: Like "Thread-Id %d, [state] running, cancel pending"
#: aix-thread.c:1806
#, c-format
msgid ", cancel pending"
msgstr ""

#: aix-thread.c:1838
msgid "Set debugging of AIX thread module."
msgstr ""

#: aix-thread.c:1839
msgid "Show debugging of AIX thread module."
msgstr ""

#: aix-thread.c:1840
msgid "Enables debugging output (used to debug GDB)."
msgstr ""

#: alpha-tdep.c:502 alpha-tdep.c:526 alpha-tdep.c:571 alpha-tdep.c:596
msgid "unknown floating point width"
msgstr ""

#. FIXME: 128-bit long doubles are returned like structures:
#. by writing into indirect storage provided by the caller
#. as the first argument.
#: alpha-tdep.c:567 alpha-tdep.c:592
msgid "Cannot set a 128-bit long double return value."
msgstr ""

#: alpha-tdep.c:1092
#, possible-c-format
msgid ""
"Hit beginning of text section without finding enclosing function for address "
"%s"
msgstr ""

#: alpha-tdep.c:1095
#, possible-c-format
msgid ""
"Hit heuristic-fence-post without finding enclosing function for address %s"
msgstr ""

#: alpha-tdep.c:1100
msgid ""
"This warning occurs if you are debugging a function without any symbols\n"
"(for example, in a stripped executable).  In that case, you may wish to\n"
"increase the size of the search with the `set heuristic-fence-post' "
"command.\n"
"\n"
"Otherwise, you told GDB there was a function where there isn't one, or\n"
"(more likely) you have encountered a bug in GDB.\n"
msgstr ""

#: alpha-tdep.c:1838 mips-tdep.c:9068
msgid "Set the distance searched for the start of a function."
msgstr ""

#: alpha-tdep.c:1839 mips-tdep.c:9069
msgid "Show the distance searched for the start of a function."
msgstr ""

#: alpha-tdep.c:1840 mips-tdep.c:9070
msgid ""
"If you are debugging a stripped executable, GDB needs to search through the\n"
"program for the start of a function.  This command sets the distance of the\n"
"search.  The only need to set it is when debugging a stripped executable."
msgstr ""

#: amd64-bsd-nat.c:68 amd64-linux-nat.c:272 i386-bsd-nat.c:153
msgid "Couldn't get segment register fs_base"
msgstr ""

#: amd64-bsd-nat.c:81 amd64-linux-nat.c:280 i386-bsd-nat.c:166
msgid "Couldn't get segment register gs_base"
msgstr ""

#: amd64-bsd-nat.c:100 amd64-bsd-nat.c:184 amd64-linux-nat.c:251
#: amd64-linux-nat.c:333 i386-bsd-nat.c:189 i386-bsd-nat.c:283
msgid "Couldn't get extended state status"
msgstr ""

#: amd64-bsd-nat.c:152 amd64-linux-nat.c:364 i386-bsd-nat.c:249
msgid "Couldn't write segment register fs_base"
msgstr ""

#: amd64-bsd-nat.c:167 amd64-linux-nat.c:371 i386-bsd-nat.c:262
msgid "Couldn't write segment register gs_base"
msgstr ""

#: amd64-bsd-nat.c:190 amd64-linux-nat.c:339 i386-bsd-nat.c:289
#: i386-linux-nat.c:372
msgid "Couldn't write extended state status"
msgstr ""

#: amd64-fbsd-nat.c:247
#, possible-c-format
msgid ""
"offsetof (struct sigcontext, sc_rip) yields %d instead of %d.\n"
"Please report this to <bug-gdb@gnu.org>."
msgstr ""

#: amd64-fbsd-nat.c:260
#, possible-c-format
msgid ""
"offsetof (struct sigcontext, sc_rsp) yields %d instead of %d.\n"
"Please report this to <bug-gdb@gnu.org>."
msgstr ""

#: amd64-fbsd-nat.c:273
#, possible-c-format
msgid ""
"offsetof (struct sigcontext, sc_rbp) yields %d instead of %d.\n"
"Please report this to <bug-gdb@gnu.org>."
msgstr ""

#: amd64-fbsd-tdep.c:221
#, possible-c-format
msgid "Unable to fetch %%fsbase"
msgstr ""

#. We shouldn't get here.
#: amd64-tdep.c:1300
msgid "unable to find free reg"
msgstr ""

#: arc-tdep.c:803
#, possible-c-format
msgid "arc: extract_return_value: type length %u too large"
msgstr ""

#: arc-tdep.c:857
msgid "arc_store_return_value: type length too large."
msgstr ""

#: arc-tdep.c:1804 arc-tdep.c:1820
msgid "Error: ARC v2 target description supplied for non-ARCv2 target.\n"
msgstr ""

#: arc-tdep.c:1837
msgid ""
"Error: ARCompact target description supplied for non-ARCompact target.\n"
msgstr ""

#: arc-tdep.c:1848
msgid ""
"Error: Couldn't find core register feature in supplied target description."
msgstr ""

#: arc-tdep.c:1882 arc-tdep.c:1906
#, possible-c-format
msgid "Error: Cannot find required register `%s' in feature `%s'.\n"
msgstr ""

#: arc-tdep.c:1894
#, possible-c-format
msgid ""
"Error: Cannot find required feature `%s' in supplied target description.\n"
msgstr ""

#: arc-tdep.c:2160
msgid "ARC-specific maintenance commands for printing GDB internal state."
msgstr ""

#: arc-tdep.c:2167
msgid "Dump arc_instruction structure for specified address."
msgstr ""

#: arc-tdep.c:2173
msgid "Set ARC specific debugging."
msgstr ""

#: arc-tdep.c:2174
msgid "Show ARC specific debugging."
msgstr ""

#: arc-tdep.c:2175
msgid "Non-zero enables ARC specific debugging."
msgstr ""

#. multiply
#: arch/arm-get-next-pcs.c:682 arch/arm-get-next-pcs.c:703
#: arch/arm-get-next-pcs.c:819 arch/arm.c:134
msgid "Invalid update to pc in instruction"
msgstr ""

#: arch/arm-get-next-pcs.c:899
msgid "Bad bit-field extraction"
msgstr ""

#: arch/arm.c:205
msgid "bad value in switch"
msgstr ""

#: arch/arm.c:419
#, possible-c-format
msgid "Invalid Arm FP type: %d"
msgstr ""

#: arch/arm.c:454
#, possible-c-format
msgid "Invalid Arm M type: %d"
msgstr ""

#: arch-utils.c:220 m32c-tdep.c:2551 m32c-tdep.c:2572
msgid "No virtual frame pointer available"
msgstr ""

#: arch-utils.c:319
msgid "The target endianness is set automatically (currently big endian)\n"
msgstr ""

#: arch-utils.c:322
msgid "The target endianness is set automatically (currently little endian)\n"
msgstr ""

#: arch-utils.c:327
msgid "The target is assumed to be big endian\n"
msgstr ""

#: arch-utils.c:330
msgid "The target is assumed to be little endian\n"
msgstr ""

#: arch-utils.c:345
msgid "set_endian: architecture update failed"
msgstr ""

#: arch-utils.c:351
msgid "Little endian target not supported by GDB\n"
msgstr ""

#: arch-utils.c:359
msgid "Big endian target not supported by GDB\n"
msgstr ""

#: arch-utils.c:365
msgid "set_endian: bad value"
msgstr ""

#: arch-utils.c:424
#, possible-c-format
msgid ""
"Selected architecture %s is not compatible with reported target architecture "
"%s"
msgstr ""

#. We have no idea which one is better.  This is a bug, but not
#. a critical problem; warn the user.
#: arch-utils.c:448
#, possible-c-format
msgid ""
"Selected architecture %s is ambiguous with reported target architecture %s"
msgstr ""

#: arch-utils.c:479
#, possible-c-format
msgid "The target architecture is set automatically (currently %s)\n"
msgstr ""

#: arch-utils.c:483
#, possible-c-format
msgid "The target architecture is assumed to be %s\n"
msgstr ""

#: arch-utils.c:504
msgid "could not select an architecture automatically"
msgstr ""

#: arch-utils.c:511
msgid "set_architecture: bfd_scan_arch failed"
msgstr ""

#: arch-utils.c:515
#, possible-c-format
msgid "Architecture `%s' not recognized.\n"
msgstr ""

#: arch-utils.c:600
msgid "Architecture of file not recognized."
msgstr ""

#: arch-utils.c:647
msgid "initialize_current_architecture: No arch"
msgstr ""

#: arch-utils.c:651
msgid "initialize_current_architecture: Arch not found"
msgstr ""

#: arch-utils.c:694
msgid ""
"initialize_current_architecture: Selection of initial architecture failed"
msgstr ""

#: arch-utils.c:708
msgid "Set architecture of target."
msgstr ""

#: arch-utils.c:709
msgid "Show architecture of target."
msgstr ""

#: arch-utils.c:851
msgid "This architecture has no method to collect a return address."
msgstr ""

#: arch-utils.c:894
msgid "This target does not support inferior memory allocation by mmap."
msgstr ""

#: arch-utils.c:1012
msgid "Set endianness of target."
msgstr ""

#: arch-utils.c:1013
msgid "Show endianness of target."
msgstr ""

#: arm-linux-nat.c:138 arm-linux-nat.c:175
msgid "Unable to fetch the floating point registers."
msgstr ""

#: arm-linux-nat.c:199
msgid "Unable to store floating point registers."
msgstr ""

#: arm-linux-nat.c:289 arm-linux-nat.c:314
msgid "Unable to fetch WMMX registers."
msgstr ""

#: arm-linux-nat.c:333
msgid "Unable to store WMMX registers."
msgstr ""

#: arm-linux-nat.c:388
msgid "Unable to fetch VFP registers (for update)."
msgstr ""

#: arm-linux-nat.c:623
#, possible-c-format
msgid ""
"arm-linux-gdb supports %d hardware watchpoints but "
"target                       supports %d"
msgstr ""

#: arm-linux-nat.c:630
#, possible-c-format
msgid ""
"arm-linux-gdb supports %d hardware breakpoints but "
"target                       supports %d"
msgstr ""

#: arm-linux-nat.c:1248 arm-linux-nat.c:1253
msgid "Unexpected error setting breakpoint"
msgstr ""

#: arm-linux-nat.c:1265 arm-linux-nat.c:1270
msgid "Unexpected error setting watchpoint"
msgstr ""

#: arm-linux-tdep.c:1773
msgid "arm_linux_init_abi: Floating point model not supported"
msgstr ""

#: arm-nbsd-nat.c:88
msgid "unable to fetch general register"
msgstr ""

#: arm-nbsd-nat.c:137 arm-nbsd-nat.c:185 arm-nbsd-nat.c:222
msgid "unable to fetch general registers"
msgstr ""

#: arm-nbsd-nat.c:155
msgid "unable to fetch floating-point register"
msgstr ""

#: arm-nbsd-nat.c:279 arm-nbsd-nat.c:356
#, possible-c-format
msgid "unable to write register %d to inferior"
msgstr ""

#: arm-nbsd-nat.c:321
msgid "unable to store general registers"
msgstr ""

#: arm-nbsd-nat.c:335
msgid "unable to fetch floating-point registers"
msgstr ""

#: arm-nbsd-nat.c:378
msgid "unable to store floating-point registers"
msgstr ""

#: arm-nbsd-nat.c:410
msgid "wrong size of register set in core file"
msgstr ""

#: arm-nbsd-nat.c:422
msgid "wrong size of FPA register set in core file"
msgstr ""

#: arm-nbsd-tdep.c:63 arm-tdep.c:9278
msgid "arm_gdbarch_init: bad byte order for float format"
msgstr ""

#: arm-tdep.c:3350 arm-tdep.c:3372
#, possible-c-format
msgid "Invalid VFP CPRC type: %d."
msgstr ""

#: arm-tdep.c:3872
#, possible-c-format
msgid "Hardware FPU type %d\n"
msgstr ""

#: arm-tdep.c:3874
#, possible-c-format
msgid "Software FPU type %d\n"
msgstr ""

#. i18n: [floating point unit] mask
#: arm-tdep.c:3876
msgid "mask: "
msgstr ""

#. i18n: [floating point unit] flags
#: arm-tdep.c:3879
msgid "flags: "
msgstr ""

#: arm-tdep.c:4108
#, possible-c-format
msgid "Bad REGNUM %d"
msgstr ""

#. Unpredictable behaviour.  Try to do something sensible (switch to ARM
#. mode, align dest to 4 bytes).
#: arm-tdep.c:4414
msgid "Single-stepping BX to non-word-aligned ARM instruction."
msgstr ""

#: arm-tdep.c:4476
msgid "Instruction wrote to PC in an unexpected way when single-stepping"
msgstr ""

#: arm-tdep.c:4482
msgid "Invalid argument to displaced_write_reg"
msgstr ""

#: arm-tdep.c:5442
msgid "copy_extra_ld_st: instruction decode error"
msgstr ""

#: arm-tdep.c:5756
msgid "Cannot single-step exception return"
msgstr ""

#: arm-tdep.c:5876
#, possible-c-format
msgid "displaced: LDM: move loaded register r%d to r%d\n"
msgstr ""

#: arm-tdep.c:5881
#, possible-c-format
msgid "displaced: LDM: register r%d already in the right place\n"
msgstr ""

#: arm-tdep.c:5901
#, possible-c-format
msgid "displaced: LDM: restored clobbered register r%d\n"
msgstr ""

#: arm-tdep.c:5944 arm-tdep.c:6055
msgid "displaced: Unpredictable LDM or STM with base register r15"
msgstr ""

#: arm-tdep.c:6013 arm-tdep.c:6099
#, possible-c-format
msgid ""
"displaced: LDM r%d%s, {..., pc}: original reg list %.4x, modified list %.4x\n"
msgstr ""

#: arm-tdep.c:7115
#, possible-c-format
msgid "displaced: POP {..., pc}: original reg list %.4x, modified list %.4x\n"
msgstr ""

#: arm-tdep.c:7232
msgid "thumb_process_displaced_16bit_insn: Instruction decode error"
msgstr ""

#: arm-tdep.c:7439
msgid "thumb_process_displaced_32bit_insn: Instruction decode error"
msgstr ""

#: arm-tdep.c:7523
msgid "arm_process_displaced_insn: Instruction decode error"
msgstr ""

#: arm-tdep.c:7836
msgid "arm_extract_return_value: Floating point model not supported"
msgstr ""

#: arm-tdep.c:8040
msgid "arm_store_return_value: Floating point model not supported"
msgstr ""

#: arm-tdep.c:8329
msgid "\"set arm\" must be followed by an apporpriate subcommand.\n"
msgstr ""

#: arm-tdep.c:8353 rs6000-tdep.c:7199 rs6000-tdep.c:7226
msgid "could not update architecture"
msgstr ""

#: arm-tdep.c:8370
#, possible-c-format
msgid "Invalid fp model accepted: %s."
msgstr ""

#: arm-tdep.c:8384
#, possible-c-format
msgid "The current ARM floating point model is \"auto\" (currently \"%s\").\n"
msgstr ""

#: arm-tdep.c:8388
#, possible-c-format
msgid "The current ARM floating point model is \"%s\".\n"
msgstr ""

#: arm-tdep.c:8407
#, possible-c-format
msgid "Invalid ABI accepted: %s."
msgstr ""

#: arm-tdep.c:8421
#, possible-c-format
msgid "The current ARM ABI is \"auto\" (currently \"%s\").\n"
msgstr ""

#: arm-tdep.c:8425
#, possible-c-format
msgid "The current ARM ABI is \"%s\".\n"
msgstr ""

#: arm-tdep.c:8434
#, possible-c-format
msgid ""
"The current execution mode assumed (when symbols are unavailable) is \"%s"
"\".\n"
msgstr ""

#: arm-tdep.c:8444
#, possible-c-format
msgid ""
"The current execution mode assumed (even when symbols are available) is \"%s"
"\".\n"
msgstr ""

#. Leave it as "auto".
#: arm-tdep.c:8970
#, possible-c-format
msgid "unknown ARM EABI version 0x%x"
msgstr ""

#: arm-tdep.c:9471
#, possible-c-format
msgid "arm_dump_tdep: Lowest pc = 0x%lx"
msgstr ""

#: arm-tdep.c:9502 arm-tdep.c:9506
msgid "Various ARM-specific commands."
msgstr ""

#: arm-tdep.c:9537
msgid "The valid values are:\n"
msgstr ""

#: arm-tdep.c:9539
msgid "The default is \"std\"."
msgstr ""

#: arm-tdep.c:9543
msgid "Set the disassembly style."
msgstr ""

#: arm-tdep.c:9544
msgid "Show the disassembly style."
msgstr ""

#: arm-tdep.c:9551
msgid "Set usage of ARM 32-bit mode."
msgstr ""

#: arm-tdep.c:9552
msgid "Show usage of ARM 32-bit mode."
msgstr ""

#: arm-tdep.c:9553
msgid "When off, a 26-bit PC will be used."
msgstr ""

#: arm-tdep.c:9561
msgid "Set the floating point type."
msgstr ""

#: arm-tdep.c:9562
msgid "Show the floating point type."
msgstr ""

#: arm-tdep.c:9563
msgid ""
"auto - Determine the FP typefrom the OS-ABI.\n"
"softfpa - Software FP, mixed-endian doubles on little-endian ARMs.\n"
"fpa - FPA co-processor (GCC compiled).\n"
"softvfp - Software FP with pure-endian doubles.\n"
"vfp - VFP co-processor."
msgstr ""

#: arm-tdep.c:9573
msgid "Set the ABI."
msgstr ""

#: arm-tdep.c:9574
msgid "Show the ABI."
msgstr ""

#: arm-tdep.c:9582
msgid "Set the mode assumed when symbols are unavailable."
msgstr ""

#: arm-tdep.c:9583
msgid "Show the mode assumed when symbols are unavailable."
msgstr ""

#: arm-tdep.c:9588
msgid "Set the mode assumed even when symbols are available."
msgstr ""

#: arm-tdep.c:9589
msgid "Show the mode assumed even when symbols are available."
msgstr ""

#: arm-tdep.c:9595
msgid "Set ARM debugging."
msgstr ""

#: arm-tdep.c:9596
msgid "Show ARM debugging."
msgstr ""

#: arm-tdep.c:9597
msgid "When on, arm-specific debugging is enabled."
msgstr ""

#: arm-tdep.c:11639 arm-tdep.c:12162 rs6000-tdep.c:5850 s390-tdep.c:3108
msgid "no syscall record support\n"
msgstr ""

#: arm-tdep.c:13073 arm-tdep.c:13288
#, possible-c-format
msgid "Process record: error reading memory at addr %s len = %d.\n"
msgstr ""

#: auto-load.c:73
#, possible-c-format
msgid "Debugging output for files of 'set auto-load ...' is %s.\n"
msgstr ""

#: auto-load.c:91
#, possible-c-format
msgid "Auto-loading of canned sequences of commands scripts is %s.\n"
msgstr ""

#: auto-load.c:131
#, possible-c-format
msgid "Auto-loading of .gdbinit script from current directory is %s.\n"
msgstr ""

#: auto-load.c:160
#, possible-c-format
msgid "List of directories from which to load auto-loaded scripts is %s.\n"
msgstr ""

#: auto-load.c:187
#, possible-c-format
msgid "auto-load: Expanded $-variables to \"%s\".\n"
msgstr ""

#: auto-load.c:203
#, possible-c-format
msgid "auto-load: Updating directories of \"%s\".\n"
msgstr ""

#: auto-load.c:226
#, possible-c-format
msgid "auto-load: Using directory \"%s\".\n"
msgstr ""

#: auto-load.c:230
#, possible-c-format
msgid "auto-load: Resolved directory \"%s\" as \"%s\".\n"
msgstr ""

#: auto-load.c:240
#, possible-c-format
msgid "auto-load: And canonicalized as \"%s\".\n"
msgstr ""

#: auto-load.c:287
msgid "Auto-load files are safe to load from any directory.\n"
msgstr ""

#: auto-load.c:290
#, possible-c-format
msgid "List of directories from which it is safe to auto-load files is %s.\n"
msgstr ""

#: auto-load.c:304
msgid ""
"Directory argument required.\n"
"Use 'set auto-load safe-path /' for disabling the auto-load safe-path "
"security."
msgstr ""

#: auto-load.c:325
msgid "Directory argument required."
msgstr ""

#: auto-load.c:342
#, possible-c-format
msgid "auto-load: Matching file \"%s\" to pattern \"%s\"\n"
msgstr ""

#: auto-load.c:360
msgid "auto-load: Matched - empty pattern\n"
msgstr ""

#: auto-load.c:375
#, possible-c-format
msgid "auto-load: Not matched - pattern \"%s\".\n"
msgstr ""

#: auto-load.c:384
#, possible-c-format
msgid "auto-load: Matched - file \"%s\" to pattern \"%s\".\n"
msgstr ""

#: auto-load.c:438
#, possible-c-format
msgid "auto-load: Resolved file \"%s\" as \"%s\".\n"
msgstr ""

#: auto-load.c:455
#, possible-c-format
msgid "auto-load: File \"%s\" matches directory \"%s\".\n"
msgstr ""

#: auto-load.c:494
#, possible-c-format
msgid ""
"File \"%ps\" auto-loading has been declined by your `auto-load safe-path' "
"set to \"%s\"."
msgstr ""

#: auto-load.c:507
#, possible-c-format
msgid ""
"To enable execution of this file add\n"
"\tadd-auto-load-safe-path %s\n"
"line to your configuration file \"%s\".\n"
"To completely disable this security protection add\n"
"\tset auto-load safe-path /\n"
"line to your configuration file \"%s\".\n"
"For more information about this security protection see the\n"
"\"Auto-loading safe path\" section in the GDB manual.  E.g., run from the "
"shell:\n"
"\tinfo \"(gdb)Auto-loading safe path\"\n"
msgstr ""

#: auto-load.c:770 auto-load.c:795
#, possible-c-format
msgid "auto-load: Attempted file \"%s\" %s.\n"
msgstr ""

#: auto-load.c:771 auto-load.c:798
msgid "exists"
msgstr ""

#: auto-load.c:771 auto-load.c:798
msgid "does not exist"
msgstr ""

#: auto-load.c:783
#, possible-c-format
msgid "auto-load: Searching 'set auto-load scripts-directory' path \"%s\".\n"
msgstr ""

#: auto-load.c:811
#, possible-c-format
msgid "auto-load: Loading %s script \"%s\" by extension for objfile \"%s\".\n"
msgstr ""

#: auto-load.c:871
#, possible-c-format
msgid "auto-load: Stripped .exe suffix, retrying with \"%s\".\n"
msgstr ""

#: auto-load.c:918 auto-load.c:1021
#, possible-c-format
msgid ""
"auto-load: Loading %s script \"%s\" from section \"%s\" of objfile \"%s\".\n"
msgstr ""

#. We don't throw an error, the program is still debuggable.
#: auto-load.c:992
#, possible-c-format
msgid ""
"Missing/bad script name in entry at offset %u in section %s\n"
"of file %ps."
msgstr ""

#: auto-load.c:1073
#, possible-c-format
msgid "Invalid entry in %s section"
msgstr ""

#: auto-load.c:1084
#, possible-c-format
msgid "Non-nul-terminated entry in %s at offset %u"
msgstr ""

#: auto-load.c:1096
#, possible-c-format
msgid "Empty entry in %s at offset %u"
msgstr ""

#: auto-load.c:1127
#, possible-c-format
msgid "Couldn't read %s section of %ps"
msgstr ""

#: auto-load.c:1277 mi/mi-cmd-file.c:143 solib.c:966 solib.c:1045
#, possible-c-format
msgid "Invalid regexp: %s"
msgstr ""

#: auto-load.c:1356
msgid "Local .gdbinit file was not found.\n"
msgstr ""

#: auto-load.c:1358
#, possible-c-format
msgid "Local .gdbinit file \"%ps\" has been loaded.\n"
msgstr ""

#: auto-load.c:1362
#, possible-c-format
msgid "Local .gdbinit file \"%ps\" has not been loaded.\n"
msgstr ""

#: auto-load.c:1379
#, possible-c-format
msgid ""
"Unsupported auto-load script at offset %u in section %s\n"
"of file %ps.\n"
"Use `info auto-load %s-scripts [REGEXP]' to list them."
msgstr ""

#: auto-load.c:1403
#, possible-c-format
msgid ""
"Missing auto-load script at offset %u in section %s\n"
"of file %ps.\n"
"Use `info auto-load %s-scripts [REGEXP]' to list them."
msgstr ""

#: auto-load.c:1434
msgid ""
"Valid is only global 'set auto-load no'; otherwise check the auto-load sub-"
"commands."
msgstr ""

#: auto-load.c:1453
msgid ""
"Auto-loading specific settings.\n"
"Configure various auto-load-specific variables such as\n"
"automatic loading of Python scripts."
msgstr ""

#: auto-load.c:1480
msgid ""
"Show auto-loading specific settings.\n"
"Show configuration of various auto-load-specific variables such as\n"
"automatic loading of Python scripts."
msgstr ""

#: auto-load.c:1523
msgid ""
"Print current status of auto-loaded files.\n"
"Print whether various files like Python scripts or .gdbinit files have been\n"
"found and/or loaded."
msgstr ""

#: auto-load.c:1544
msgid "Enable or disable auto-loading of canned sequences of commands scripts."
msgstr ""

#: auto-load.c:1545
msgid ""
"Show whether auto-loading of canned sequences of commands scripts is enabled."
msgstr ""

#: auto-load.c:1547
msgid ""
"If enabled, canned sequences of commands are loaded when the debugger reads\n"
"an executable or shared library.\n"
"This option has security implications for untrusted inferiors."
msgstr ""

#: auto-load.c:1556
msgid ""
"Print the list of automatically loaded sequences of commands.\n"
"Usage: info auto-load gdb-scripts [REGEXP]"
msgstr ""

#: auto-load.c:1561
msgid "Enable or disable auto-loading of .gdbinit script in current directory."
msgstr ""

#: auto-load.c:1562
msgid ""
"Show whether auto-loading .gdbinit script in current directory is enabled."
msgstr ""

#: auto-load.c:1564
msgid ""
"If enabled, canned sequences of commands are loaded when debugger starts\n"
"from .gdbinit file in current directory.  Such files are deprecated,\n"
"use a script associated with inferior executable file instead.\n"
"This option has security implications for untrusted inferiors."
msgstr ""

#: auto-load.c:1574
msgid ""
"Print whether current directory .gdbinit file has been loaded.\n"
"Usage: info auto-load local-gdbinit"
msgstr ""

#: auto-load.c:1582
#, possible-c-format
msgid "GDB scripts:    OBJFILE%s\n"
msgstr ""

#: auto-load.c:1589
#, possible-c-format
msgid "Python scripts: OBJFILE%s\n"
msgstr ""

#: auto-load.c:1597
#, possible-c-format
msgid "Guile scripts:  OBJFILE%s\n"
msgstr ""

#: auto-load.c:1602
#, possible-c-format
msgid ""
"Automatically loaded scripts are located in one of the directories listed\n"
"by this option.\n"
"\n"
"Script names:\n"
"%s%s%s\n"
"This option is ignored for the kinds of scripts having 'set auto-load ... "
"off'.\n"
"Directories listed here need to be present also in the 'set auto-load safe-"
"path'\n"
"option."
msgstr ""

#: auto-load.c:1619
msgid "Set the list of directories from which to load auto-loaded scripts."
msgstr ""

#: auto-load.c:1620
msgid "Show the list of directories from which to load auto-loaded scripts."
msgstr ""

#: auto-load.c:1634
msgid "Set the list of files and directories that are safe for auto-loading."
msgstr ""

#: auto-load.c:1635
msgid "Show the list of files and directories that are safe for auto-loading."
msgstr ""

#: auto-load.c:1636
msgid ""
"Various files loaded automatically for the 'set auto-load ...' options must\n"
"be located in one of the directories listed by this option.  Warning will "
"be\n"
"printed and file will not be used otherwise.\n"
"You can mix both directory and filename entries.\n"
"Setting this parameter to an empty list resets it to its default value.\n"
"Setting this parameter to '/' (without the quotes) allows any file\n"
"for the 'set auto-load ...' options.  Each path entry can be also shell\n"
"wildcard pattern; '*' does not match directory separator.\n"
"This option is ignored for the kinds of files having 'set auto-load ... "
"off'.\n"
"This option has security implications for untrusted inferiors."
msgstr ""

#: auto-load.c:1655
msgid ""
"Add entries to the list of directories from which it is safe to auto-load "
"files.\n"
"See the commands 'set auto-load safe-path' and 'show auto-load safe-path' "
"to\n"
"access the current full list setting."
msgstr ""

#: auto-load.c:1664
msgid ""
"Add entries to the list of directories from which to load auto-loaded "
"scripts.\n"
"See the commands 'set auto-load scripts-directory' and\n"
"'show auto-load scripts-directory' to access the current full list setting."
msgstr ""

#: auto-load.c:1672
msgid "Set auto-load verifications debugging."
msgstr ""

#: auto-load.c:1673
msgid "Show auto-load verifications debugging."
msgstr ""

#: auto-load.c:1674
msgid ""
"When non-zero, debugging output for files of 'set auto-load ...'\n"
"is displayed."
msgstr ""

#: auxv.c:426
msgid "End of vector"
msgstr ""

#: auxv.c:427 auxv.c:449
msgid "Entry should be ignored"
msgstr ""

#: auxv.c:428
msgid "File descriptor of program"
msgstr ""

#: auxv.c:429
msgid "Program headers for program"
msgstr ""

#: auxv.c:430
msgid "Size of program header entry"
msgstr ""

#: auxv.c:431
msgid "Number of program headers"
msgstr ""

#: auxv.c:432
msgid "System page size"
msgstr ""

#: auxv.c:433
msgid "Base address of interpreter"
msgstr ""

#: auxv.c:434
msgid "Flags"
msgstr ""

#: auxv.c:435
msgid "Entry point of program"
msgstr ""

#: auxv.c:436
msgid "Program is not ELF"
msgstr ""

#: auxv.c:437 auxv.c:465
msgid "Real user ID"
msgstr ""

#: auxv.c:438 auxv.c:464
msgid "Effective user ID"
msgstr ""

#: auxv.c:439 auxv.c:467
msgid "Real group ID"
msgstr ""

#: auxv.c:440 auxv.c:466
msgid "Effective group ID"
msgstr ""

#: auxv.c:441
msgid "Frequency of times()"
msgstr ""

#: auxv.c:442
msgid "String identifying platform"
msgstr ""

#: auxv.c:443 auxv.c:475 fbsd-tdep.c:1597
msgid "Machine-dependent CPU capability hints"
msgstr ""

#: auxv.c:445
msgid "Used FPU control word"
msgstr ""

#: auxv.c:446
msgid "Data cache block size"
msgstr ""

#: auxv.c:447
msgid "Instruction cache block size"
msgstr ""

#: auxv.c:448
msgid "Unified cache block size"
msgstr ""

#: auxv.c:450
msgid "String identifying base platform"
msgstr ""

#: auxv.c:452
msgid "Address of 16 random bytes"
msgstr ""

#: auxv.c:453 fbsd-tdep.c:1598
msgid "Extension of AT_HWCAP"
msgstr ""

#: auxv.c:454
msgid "File name of executable"
msgstr ""

#: auxv.c:455
msgid "Boolean, was exec setuid-like?"
msgstr ""

#: auxv.c:456
msgid "Special system info/entry points"
msgstr ""

#: auxv.c:457
msgid "System-supplied DSO's ELF header"
msgstr ""

#: auxv.c:459
msgid "L1 Instruction cache information"
msgstr ""

#: auxv.c:461
msgid "L1 Data cache information"
msgstr ""

#: auxv.c:462
msgid "L2 cache information"
msgstr ""

#: auxv.c:463
msgid "L3 cache information"
msgstr ""

#: auxv.c:468
msgid "Dynamic linker's ELF header"
msgstr ""

#: auxv.c:469
msgid "Dynamic linker's section headers"
msgstr ""

#: auxv.c:471
msgid "String giving name of dynamic linker"
msgstr ""

#: auxv.c:473
msgid "Large pagesize"
msgstr ""

#: auxv.c:474
msgid "Platform name string"
msgstr ""

#: auxv.c:477
msgid "Should flush icache?"
msgstr ""

#: auxv.c:478
msgid "CPU name string"
msgstr ""

#: auxv.c:479
msgid "COFF entry point address"
msgstr ""

#: auxv.c:480
msgid "COFF executable file descriptor"
msgstr ""

#: auxv.c:483
msgid "Canonicalized file name given to execve"
msgstr ""

#: auxv.c:484
msgid "String for name of MMU module"
msgstr ""

#: auxv.c:485
msgid "Dynamic linker's data segment address"
msgstr ""

#: auxv.c:488
msgid "AF_SUN_ flags passed from the kernel"
msgstr ""

#: auxv.c:489
msgid "Name of emulation binary for runtime linker"
msgstr ""

#: auxv.c:491
msgid "Name of brand library"
msgstr ""

#: auxv.c:492
msgid "Aux vector for brand modules 1"
msgstr ""

#: auxv.c:494
msgid "Aux vector for brand modules 2"
msgstr ""

#: auxv.c:496
msgid "Aux vector for brand modules 3"
msgstr ""

#: auxv.c:498
msgid "Machine-dependent CPU capability hints 2"
msgstr ""

#: auxv.c:537
msgid "The program has no auxiliary information now."
msgstr ""

#: auxv.c:543
msgid "No auxiliary vector found, or failed reading it."
msgstr ""

#: auxv.c:545
msgid "Auxiliary vector is empty."
msgstr ""

#: auxv.c:553
msgid ""
"Display the inferior's auxiliary vector.\n"
"This is information provided by the operating system at program startup."
msgstr ""

#: avr-tdep.c:402 avr-tdep.c:420 i386-tdep.c:475 i386-tdep.c:3244
#: i386-tdep.c:3445 i386-tdep.c:3582 i386-tdep.c:3664 s390-tdep.c:1288
#: s390-tdep.c:1311 s390-tdep.c:1386 s390-tdep.c:1443 s390-tdep.c:1505
#: s390-tdep.c:1551 sparc64-tdep.c:899
msgid "invalid regnum"
msgstr ""

#: avr-tdep.c:663
#, possible-c-format
msgid "Num pushes too large: %d\n"
msgstr ""

#: avr-tdep.c:1564
msgid "ERR: info io_registers NOT supported by current target\n"
msgstr ""

#: avr-tdep.c:1574
msgid "Error fetching number of io registers\n"
msgstr ""

#: avr-tdep.c:1580
#, possible-c-format
msgid ""
"Target has %u io registers:\n"
"\n"
msgstr ""

#: avr-tdep.c:1598
#, possible-c-format
msgid "ERR: error reading avr.io_reg:%x,%x\n"
msgstr ""

#: avr-tdep.c:1632
msgid "Query remote AVR target for I/O space register values."
msgstr ""

#: ax-gdb.c:512
msgid "gen_fetch: strange size"
msgstr ""

#. Our caller requested us to dereference a pointer from an unsupported
#. type.  Error out and give callers a chance to handle the failure
#. gracefully.
#: ax-gdb.c:522
#, possible-c-format
msgid "gen_fetch: Unsupported type code `%s'."
msgstr ""

#: ax-gdb.c:645
msgid "gen_var_ref: LOC_CONST_BYTES symbols are not supported"
msgstr ""

#: ax-gdb.c:677
#, possible-c-format
msgid "Cannot compute value of typedef `%s'."
msgstr ""

#: ax-gdb.c:711
#, possible-c-format
msgid "Couldn't resolve symbol `%s'."
msgstr ""

#: ax-gdb.c:720 findvar.c:359 findvar.c:741 printcmd.c:1519 tracepoint.c:2629
msgid "LOC_COMPUTED variable missing a method"
msgstr ""

#: ax-gdb.c:729
#, possible-c-format
msgid "Cannot find value of botched symbol `%s'."
msgstr ""

#: ax-gdb.c:782
msgid "Value not scalar: cannot be an rvalue."
msgstr ""

#: ax-gdb.c:1019
msgid "Invalid type cast: intended type must be scalar."
msgstr ""

#: ax-gdb.c:1042
msgid "Casts to requested type are not yet implemented."
msgstr ""

#: ax-gdb.c:1110
msgid ""
"First argument of `-' is a pointer, but second argument is neither\n"
"an integer nor a pointer of the same type."
msgstr ""

#: ax-gdb.c:1163
#, possible-c-format
msgid "Invalid combination of types in %s."
msgstr ""

#: ax-gdb.c:1180
msgid "Invalid type of operand to `!'."
msgstr ""

#: ax-gdb.c:1191
msgid "Invalid type of operand to `~'."
msgstr ""

#: ax-gdb.c:1209
msgid "gen_deref: expected a pointer"
msgstr ""

#: ax-gdb.c:1218 valops.c:897
msgid "Attempt to dereference a generic pointer."
msgstr ""

#: ax-gdb.c:1239
msgid "Operand of `&' is an rvalue, which has no address."
msgstr ""

#: ax-gdb.c:1242
msgid "Operand of `&' is in a register, and has no address."
msgstr ""

#: ax-gdb.c:1313
msgid "gen_bitfield_ref: bitfield too wide"
msgstr ""

#: ax-gdb.c:1463 ax-gdb.c:1601
#, possible-c-format
msgid "static field `%s' has been optimized out, cannot use"
msgstr ""

#: ax-gdb.c:1475
msgid "find_field: anonymous unions not supported"
msgstr ""

#: ax-gdb.c:1523
#, possible-c-format
msgid "The left operand of `%s' is not a %s."
msgstr ""

#: ax-gdb.c:1529
msgid "Structure does not live in memory."
msgstr ""

#: ax-gdb.c:1535
#, possible-c-format
msgid "Couldn't find member named `%s' in struct/union/class `%s'"
msgstr ""

#: ax-gdb.c:1589
msgid "non-aggregate type to gen_struct_elt_for_reference"
msgstr ""

#: ax-gdb.c:1607 valops.c:3354
msgid "pointers to bitfield members not allowed"
msgstr ""

#. FIXME we need a way to do "want_address" equivalent
#: ax-gdb.c:1611 valops.c:3405
#, possible-c-format
msgid "Cannot reference non-static field \"%s\""
msgstr ""

#: ax-gdb.c:1631 eval.c:997 valops.c:3574
#, possible-c-format
msgid "No symbol \"%s\" in namespace \"%s\"."
msgstr ""

#: ax-gdb.c:1660 ax-gdb.c:1786 ax-gdb.c:2010 ax-gdb.c:2242
#, possible-c-format
msgid "`%s' has been optimized out, cannot use"
msgstr ""

#: ax-gdb.c:1682
msgid "non-aggregate type in gen_aggregate_elt_ref"
msgstr ""

#: ax-gdb.c:1709
msgid "Left operand of `@' must be an object in memory."
msgstr ""

#: ax-gdb.c:1717
msgid "Right operand of `@' must be a constant, in agent expressions."
msgstr ""

#: ax-gdb.c:1720
msgid "Right operand of `@' must be an integer."
msgstr ""

#: ax-gdb.c:1723
msgid "Right operand of `@' must be positive."
msgstr ""

#: ax-gdb.c:1936 ax-gdb.c:1972
#, possible-c-format
msgid "$%s is not a trace state variable, may not assign to it"
msgstr ""

#: ax-gdb.c:1940 ax-gdb.c:1976
msgid "May only assign to trace state variables"
msgstr ""

#: ax-gdb.c:2037 tracepoint.c:1396
#, possible-c-format
msgid "Register $%s not available"
msgstr ""

#: ax-gdb.c:2040
#, possible-c-format
msgid "'%s' is a user-register; GDB cannot yet trace user-register contents."
msgstr ""

#: ax-gdb.c:2067
#, possible-c-format
msgid ""
"$%s is not a trace state variable; GDB agent expressions cannot use "
"convenience variables."
msgstr ""

#: ax-gdb.c:2185
msgid "Argument of unary `*' is not a pointer."
msgstr ""

#: ax-gdb.c:2221
msgid "gen_expr: unhandled struct case"
msgstr ""

#: ax-gdb.c:2237
#, possible-c-format
msgid "no `%s' found"
msgstr ""

#: ax-gdb.c:2258 eval.c:1284 eval.c:3075
#, possible-c-format
msgid "There is no field named %s"
msgstr ""

#: ax-gdb.c:2266
msgid "Attempt to use a type name as an expression."
msgstr ""

#: ax-gdb.c:2269
#, possible-c-format
msgid "Unsupported operator %s (%d) in expression."
msgstr ""

#: ax-gdb.c:2345
msgid "cannot subscript requested type: cannot call user defined functions"
msgstr ""

#: ax-gdb.c:2358 eval.c:2317 eval.c:2358 eval.c:2382 m2-lang.c:275
#, possible-c-format
msgid "cannot subscript something of type `%s'"
msgstr ""

#: ax-gdb.c:2361 eval.c:2320 eval.c:2385 m2-lang.c:278
msgid "cannot subscript requested type"
msgstr ""

#: ax-gdb.c:2366 valarith.c:934
msgid "Argument to arithmetic operation not a number or boolean."
msgstr ""

#: ax-gdb.c:2421
msgid "gen_expr: op case sets don't match"
msgstr ""

#: ax-gdb.c:2628 ax-gdb.c:2688
msgid "GDB can't do agent expression translation with overlays."
msgstr ""

#: ax-gdb.c:2631 ax-gdb.c:2691
msgid "expression to translate"
msgstr ""

#: ax-gdb.c:2696
msgid "Must start with a format string."
msgstr ""

#: ax-gdb.c:2705 breakpoint.c:2228 printcmd.c:2550
msgid "Bad format string, non-terminated '\"'."
msgstr ""

#: ax-gdb.c:2710 breakpoint.c:2233 printcmd.c:2555
msgid "Invalid argument syntax"
msgstr ""

#: ax-gdb.c:2750
msgid ""
"Translate an expression into remote agent bytecode for tracing.\n"
"Usage: maint agent [-at LOCATION,] EXPRESSION\n"
"If -at is given, generate remote agent bytecode for this location.\n"
"If not, generate remote agent bytecode for current frame pc address."
msgstr ""

#: ax-gdb.c:2758
msgid ""
"Translate an expression into remote agent bytecode for evaluation.\n"
"Usage: maint agent-eval [-at LOCATION,] EXPRESSION\n"
"If -at is given, generate remote agent bytecode for this location.\n"
"If not, generate remote agent bytecode for current frame pc address."
msgstr ""

#: ax-gdb.c:2766
msgid ""
"Translate an expression into remote agent bytecode for evaluation and "
"display the bytecodes."
msgstr ""

#: ax-general.c:107
msgid "GDB bug: ax-general.c (read_const): incomplete constant"
msgstr ""

#: ax-general.c:138
msgid "GDB bug: ax-general.c (ax_pick): stack depth out of range"
msgstr ""

#: ax-general.c:151
msgid "GDB bug: ax-general.c (generic_ext): bit count out of range"
msgstr ""

#: ax-general.c:154
msgid "GDB bug: ax-general.c (generic_ext): opcode has inadequate range"
msgstr ""

#: ax-general.c:185
msgid ""
"GDB bug: ax-general.c (ax_trace_quick): size out of range for trace_quick"
msgstr ""

#: ax-general.c:221
msgid "GDB bug: ax-general.c (ax_label): label target out of range"
msgstr ""

#. FIXME: floating-point support not present yet.
#: ax-general.c:267
msgid "GDB bug: ax-general.c (ax_const_d): floating point not supported yet"
msgstr ""

#: ax-general.c:281 ax-general.c:432
#, possible-c-format
msgid "'%s' is a pseudo-register; GDB cannot yet trace its contents."
msgstr ""

#: ax-general.c:285 ax-general.c:436
#, possible-c-format
msgid "Trace '%s' failed."
msgstr ""

#: ax-general.c:295
msgid "GDB bug: ax-general.c (ax_reg): register number out of range"
msgstr ""

#: ax-general.c:313
#, possible-c-format
msgid "ax-general.c (ax_tsv): variable number is %d, out of range"
msgstr ""

#: ax-general.c:336
#, possible-c-format
msgid "ax-general.c (ax_string): string length is %d, out of allowed range"
msgstr ""

#: ax-general.c:368
#, possible-c-format
msgid "Scope: %s\n"
msgstr ""

#: ax-general.c:369
msgid "Reg mask:"
msgstr ""

#: ax-general.c:371
#, possible-c-format
msgid " %02x"
msgstr ""

#: ax-general.c:372 darwin-nat-info.c:292 darwin-nat-info.c:585
#: darwin-nat-info.c:787 darwin-nat.c:545
msgid "\n"
msgstr ""

#: ax-general.c:378
msgid "GDB bug: ax-general.c (ax_print): opcode map out of sync"
msgstr ""

#: ax-general.c:387
#, possible-c-format
msgid "%3d  <bad opcode %02x>\n"
msgstr ""

#: ax-general.c:393
#, possible-c-format
msgid "%3d  <incomplete opcode %s>\n"
msgstr ""

#: ax-general.c:415
#, possible-c-format
msgid " \"%s\", %d args"
msgstr ""

#. i18n: Like "Percentage of duplicates, by count: (not applicable)".
#. i18n: "Average entry size: (not applicable)".
#. i18n: "Average hash chain length: (not applicable)".
#: bcache.c:241 bcache.c:340 bcache.c:370
msgid "(not applicable)\n"
msgstr ""

#: bcache.c:321
#, possible-c-format
msgid "  M_Cached '%s' statistics:\n"
msgstr ""

#: bcache.c:322
#, possible-c-format
msgid "    Total object count:  %ld\n"
msgstr ""

#: bcache.c:323
#, possible-c-format
msgid "    Unique object count: %lu\n"
msgstr ""

#: bcache.c:324
msgid "    Percentage of duplicates, by count: "
msgstr ""

#: bcache.c:328
#, possible-c-format
msgid "    Total object size:   %ld\n"
msgstr ""

#: bcache.c:329
#, possible-c-format
msgid "    Unique object size:  %ld\n"
msgstr ""

#: bcache.c:330
msgid "    Percentage of duplicates, by size:  "
msgstr ""

#: bcache.c:334
#, possible-c-format
msgid "    Max entry size:     %d\n"
msgstr ""

#: bcache.c:335
msgid "    Average entry size: "
msgstr ""

#: bcache.c:341
#, possible-c-format
msgid "    Median entry size:  %d\n"
msgstr ""

#: bcache.c:344
#, possible-c-format
msgid "    Total memory used by bcache, including overhead: %ld\n"
msgstr ""

#: bcache.c:347
msgid "    Percentage memory overhead: "
msgstr ""

#: bcache.c:349
msgid "    Net memory savings:         "
msgstr ""

#: bcache.c:353
#, possible-c-format
msgid "    Hash table size:           %3d\n"
msgstr ""

#: bcache.c:355
#, possible-c-format
msgid "    Hash table expands:        %lu\n"
msgstr ""

#: bcache.c:357
#, possible-c-format
msgid "    Hash table hashes:         %lu\n"
msgstr ""

#: bcache.c:359
#, possible-c-format
msgid "    Half hash misses:          %lu\n"
msgstr ""

#: bcache.c:361
msgid "    Hash table population:     "
msgstr ""

#: bcache.c:363
#, possible-c-format
msgid "    Median hash chain length:  %3d\n"
msgstr ""

#: bcache.c:365
msgid "    Average hash chain length: "
msgstr ""

#: bcache.c:371
#, possible-c-format
msgid "    Maximum hash chain length: %3d\n"
msgstr ""

#: bfd-target.c:30
msgid "BFD backed target"
msgstr ""

#: bfd-target.c:31 test-target.c:29
msgid "You should never see this"
msgstr ""

#: bfin-tdep.c:453
msgid ""
"Function Prologue not recognised; pc will point to ENTRY_POINT of the "
"function"
msgstr ""

#: bfin-tdep.c:699 bfin-tdep.c:719 xtensa-tdep.c:334 xtensa-tdep.c:626
#: xtensa-tdep.c:714
#, possible-c-format
msgid "invalid register number %d"
msgstr ""

#: block.c:241
#, possible-c-format
msgid "DW_OP_entry_value resolving cannot find DW_TAG_call_site %s in %s"
msgstr ""

#: blockframe.c:411
msgid "Entry block not found in find_function_entry_range_from_pc"
msgstr ""

#: break-catch-sig.c:196
#, possible-c-format
msgid "Catchpoint %d (signal %s), "
msgstr ""

#: break-catch-sig.c:264
#, possible-c-format
msgid "Catchpoint %d (signals"
msgstr ""

#: break-catch-sig.c:266
#, possible-c-format
msgid "Catchpoint %d (signal"
msgstr ""

#: break-catch-sig.c:277
#, possible-c-format
msgid "Catchpoint %d (any signal)"
msgstr ""

#: break-catch-sig.c:279
#, possible-c-format
msgid "Catchpoint %d (standard signals)"
msgstr ""

#: break-catch-sig.c:357
msgid "'all' cannot be caught with other signals"
msgstr ""

#: break-catch-sig.c:373
#, possible-c-format
msgid "Unknown signal name '%s'."
msgstr ""

#: break-catch-sig.c:435
msgid ""
"Catch signals by their names and/or numbers.\n"
"Usage: catch signal [[NAME|NUMBER] [NAME|NUMBER]...|all]\n"
"Arguments say which signals to catch.  If no arguments\n"
"are given, every \"normal\" signal will be caught.\n"
"The argument \"all\" means to also catch signals used by GDB.\n"
"Arguments, if given, should be one or more signal names\n"
"(if your system supports that), or signal numbers."
msgstr ""

#: break-catch-syscall.c:296
#, possible-c-format
msgid "Catchpoint %d (syscalls"
msgstr ""

#: break-catch-syscall.c:298
#, possible-c-format
msgid "Catchpoint %d (syscall"
msgstr ""

#: break-catch-syscall.c:313
#, possible-c-format
msgid "Catchpoint %d (any syscall)"
msgstr ""

#: break-catch-syscall.c:408
#, possible-c-format
msgid "Unknown syscall group '%s'."
msgstr ""

#. Here we have to issue an error instead of a warning,
#. because GDB cannot do anything useful if there's no
#. syscall number to be caught.
#: break-catch-syscall.c:418
#, possible-c-format
msgid "Unknown syscall name '%s'."
msgstr ""

#: break-catch-syscall.c:438
msgid "The feature 'catch syscall' is not supported on this architecture yet."
msgstr ""

#: break-catch-syscall.c:610
msgid ""
"Catch system calls by their names, groups and/or numbers.\n"
"Arguments say which system calls to catch.  If no arguments are given,\n"
"every system call will be caught.  Arguments, if given, should be one\n"
"or more system call names (if your system supports that), system call\n"
"groups or system call numbers."
msgstr ""

#. We have been told to display the contents of F77 COMMON
#. block supposedly visible in this function.  Let us
#. first make sure that it is visible and if so, let
#. us display its contents.
#: break-catch-throw.c:103 f-valprint.c:451 probe.c:808
msgid "No frame selected"
msgstr ""

#: break-catch-throw.c:110
msgid "did not find exception probe (does libstdcxx have SDT probes?)"
msgstr ""

#: break-catch-throw.c:116
msgid "not stopped at a C++ exception catchpoint"
msgstr ""

#: break-catch-throw.c:120
msgid "C++ exception catchpoint has too few arguments"
msgstr ""

#: break-catch-throw.c:127
msgid "error computing probe argument at c++ exception catchpoint"
msgstr ""

#: break-catch-throw.c:300
msgid "\tmatching: "
msgstr ""

#: break-catch-throw.c:315
msgid "Catchpoint"
msgstr ""

#: break-catch-throw.c:318
msgid "(throw)"
msgstr ""

#: break-catch-throw.c:319
msgid "(catch)"
msgstr ""

#: break-catch-throw.c:319
msgid "(rethrow)"
msgstr ""

#: break-catch-throw.c:368
msgid "invalid type-matching regexp"
msgstr ""

#: break-catch-throw.c:445
msgid "Unsupported or unknown exception event; cannot catch it"
msgstr ""

#. Add catch and tcatch sub-commands.
#: break-catch-throw.c:541
msgid "Catch an exception, when caught."
msgstr ""

#: break-catch-throw.c:547
msgid "Catch an exception, when thrown."
msgstr ""

#: break-catch-throw.c:553
msgid "Catch an exception, when rethrown."
msgstr ""

#: breakpoint.c:327
#, possible-c-format
msgid "Debugger's willingness to use watchpoint hardware is %s.\n"
msgstr ""

#: breakpoint.c:343
#, possible-c-format
msgid "Debugger's behavior regarding pending breakpoints is %s.\n"
msgstr ""

#: breakpoint.c:359
#, possible-c-format
msgid "Automatic usage of hardware breakpoints is %s.\n"
msgstr ""

#: breakpoint.c:376
#, possible-c-format
msgid "Always inserted breakpoint mode is %s.\n"
msgstr ""

#: breakpoint.c:712
msgid ""
"Target does not support breakpoint condition evaluation.\n"
"Using host evaluation mode instead."
msgstr ""

#: breakpoint.c:768
#, possible-c-format
msgid "Breakpoint condition evaluation mode is %s (currently %s).\n"
msgstr ""

#: breakpoint.c:773
#, possible-c-format
msgid "Breakpoint condition evaluation mode is %s.\n"
msgstr ""

#: breakpoint.c:857
#, possible-c-format
msgid "Breakpoint %d now unconditional.\n"
msgstr ""

#: breakpoint.c:954
msgid "breakpoint number"
msgstr ""

#: breakpoint.c:959
#, possible-c-format
msgid "Bad breakpoint argument: '%s'"
msgstr ""

#: breakpoint.c:972 guile/scm-breakpoint.c:947 python/py-breakpoint.c:1176
#, possible-c-format
msgid ""
"Only one stop condition allowed.  There is currently a %s stop condition "
"defined for this breakpoint."
msgstr ""

#: breakpoint.c:984 breakpoint.c:13862
#, possible-c-format
msgid "No breakpoint number %d."
msgstr ""

#: breakpoint.c:999
msgid "The 'while-stepping' command can only be used for tracepoints"
msgstr ""

#: breakpoint.c:1009
msgid "The 'collect' command can only be used for tracepoints"
msgstr ""

#: breakpoint.c:1012
msgid "The 'teval' command can only be used for tracepoints"
msgstr ""

#: breakpoint.c:1097
msgid "The 'while-stepping' command cannot be used for fast tracepoint"
msgstr ""

#: breakpoint.c:1100
msgid "The 'while-stepping' command cannot be used for static tracepoint"
msgstr ""

#: breakpoint.c:1104
msgid "The 'while-stepping' command can be used only once"
msgstr ""

#: breakpoint.c:1121
msgid "The 'while-stepping' command cannot be nested"
msgstr ""

#: breakpoint.c:1238
#, possible-c-format
msgid "Type commands for breakpoint(s) %s, one per line."
msgstr ""

#: breakpoint.c:1476
#, possible-c-format
msgid "reading through apparently deleted breakpoint #%d?"
msgstr ""

#: breakpoint.c:1758 breakpoint.c:1939
msgid ""
"Can't set read/access watchpoint when hardware watchpoints are disabled."
msgstr ""

#: breakpoint.c:1918
msgid "Target does not support this type of hardware watchpoint."
msgstr ""

#: breakpoint.c:1921
msgid "There are not enough available hardware resources for this watchpoint."
msgstr ""

#: breakpoint.c:1942
msgid "Expression cannot be implemented with read/access watchpoint."
msgstr ""

#: breakpoint.c:1963
#, possible-c-format
msgid ""
"Watchpoint %d deleted because the program has left the block\n"
"in which its expression is valid.\n"
msgstr ""

#: breakpoint.c:2219
msgid "No format string following the location"
msgstr ""

#: breakpoint.c:2497
msgid ""
"Note: automatically using hardware breakpoints for read-only addresses.\n"
msgstr ""

#: breakpoint.c:2508
#, possible-c-format
msgid ""
"Cannot insert breakpoint %d.\n"
"Cannot set software breakpoint at read-only address %s\n"
msgstr ""

#: breakpoint.c:2547
#, possible-c-format
msgid "hardware breakpoint %d not supported in overlay!"
msgstr ""

#: breakpoint.c:2751
#, possible-c-format
msgid ""
"Error inserting catchpoint %d: Your system does not support this type\n"
"of catchpoint."
msgstr ""

#: breakpoint.c:2755
#, possible-c-format
msgid "Error inserting catchpoint %d."
msgstr ""

#: breakpoint.c:3037
#, possible-c-format
msgid ""
"Thread-specific breakpoint %d deleted - thread %s no longer in the thread "
"list.\n"
msgstr ""

#: breakpoint.c:3602
msgid "Cannot detach breakpoints of inferior_ptid"
msgstr ""

#: breakpoint.c:3759
#, possible-c-format
msgid "Could not remove hardware watchpoint %d."
msgstr ""

#: breakpoint.c:4459
msgid "<unreadable>"
msgstr ""

#: breakpoint.c:4537
msgid "print_bp_stop_message: unrecognized enum value"
msgstr ""

#: breakpoint.c:4553
msgid "Stopped due to shared library event:\n"
msgstr ""

#: breakpoint.c:4555
msgid "Stopped due to shared library event (no libraries added or removed)\n"
msgstr ""

#: breakpoint.c:4565
msgid "  Inferior unloaded "
msgstr ""

#: breakpoint.c:4580
msgid "  Inferior loaded "
msgstr ""

#: breakpoint.c:4997
#, possible-c-format
msgid "Watchpoint %d deleted.\n"
msgstr ""

#: breakpoint.c:5233
msgid "Watchpoint condition cannot be tested in the current scope"
msgstr ""

#: breakpoint.c:5627
msgid "bpstat_what: tracepoint encountered"
msgstr ""

#: breakpoint.c:5648
#, possible-c-format
msgid "bpstat_what: unhandled bptype %d"
msgstr ""

#: breakpoint.c:5925
#, possible-c-format
msgid "bptypes table does not describe type #%d."
msgstr ""

#: breakpoint.c:6640
msgid "Note: breakpoint "
msgstr ""

#. if (others == ???)
#: breakpoint.c:6642
msgid "Note: breakpoints "
msgstr ""

#: breakpoint.c:6660
#, possible-c-format
msgid "also set at pc %ps.\n"
msgstr ""

#: breakpoint.c:6854
#, possible-c-format
msgid "Breakpoint %d address previously adjusted from %s to %s."
msgstr ""

#: breakpoint.c:6857
#, possible-c-format
msgid "Breakpoint address adjusted from %s to %s."
msgstr ""

#: breakpoint.c:6955
msgid "unknown breakpoint type"
msgstr ""

#: breakpoint.c:7539
#, possible-c-format
msgid "Temporarily disabling breakpoints for unloaded shared library \"%s\""
msgstr ""

#: breakpoint.c:7734
#, possible-c-format
msgid "Catchpoint %d (fork)"
msgstr ""

#: breakpoint.c:7849
#, possible-c-format
msgid "Catchpoint %d (vfork)"
msgstr ""

#: breakpoint.c:8006
#, possible-c-format
msgid "load of library matching %s"
msgstr ""

#: breakpoint.c:8008
msgid "load of library"
msgstr ""

#: breakpoint.c:8013
#, possible-c-format
msgid "unload of library matching %s"
msgstr ""

#: breakpoint.c:8015
msgid "unload of library"
msgstr ""

#: breakpoint.c:8028
#, possible-c-format
msgid "Catchpoint %d (%s)"
msgstr ""

#: breakpoint.c:8068 stack.c:2385 symtab.c:4336 symtab.c:4728 symtab.c:4736
msgid "Invalid regexp"
msgstr ""

#: breakpoint.c:8264
#, possible-c-format
msgid "Catchpoint %d (exec)"
msgstr ""

#: breakpoint.c:8656 printcmd.c:2545
msgid "Bad format string, missing '\"'."
msgstr ""

#: breakpoint.c:8663
msgid "No function supplied for dprintf call"
msgstr ""

#: breakpoint.c:8681
msgid "Target cannot run dprintf commands, falling back to GDB printf"
msgstr ""

#: breakpoint.c:8687
msgid "Invalid dprintf style."
msgstr ""

#: breakpoint.c:8743 breakpoint.c:14243
msgid "No hardware breakpoint support in the target."
msgstr ""

#: breakpoint.c:8745 breakpoint.c:9790 breakpoint.c:14245
msgid "Hardware breakpoints used exceeds limit."
msgstr ""

#: breakpoint.c:8798 breakpoint.c:8806
#, possible-c-format
msgid "Probed static tracepoint marker \"%s\"\n"
msgstr ""

#: breakpoint.c:8811
msgid "Couldn't determine the static tracepoint marker to probe"
msgstr ""

#: breakpoint.c:8831
#, possible-c-format
msgid "Garbage '%s' follows condition"
msgstr ""

#: breakpoint.c:8841 breakpoint.c:9570
msgid "Format string required"
msgstr ""

#: breakpoint.c:8844
#, possible-c-format
msgid "Garbage '%s' at end of command"
msgstr ""

#: breakpoint.c:8984
msgid "No default breakpoint address now."
msgstr ""

#: breakpoint.c:9053
#, possible-c-format
msgid "May not have a fast tracepoint at %s%s"
msgstr ""

#: breakpoint.c:9109
msgid "Junk after thread keyword."
msgstr ""

#: breakpoint.c:9120
msgid "Junk after task keyword."
msgstr ""

#: breakpoint.c:9122
#, possible-c-format
msgid "Unknown task %d."
msgstr ""

#: breakpoint.c:9152
#, possible-c-format
msgid "No known static tracepoint marker named %s"
msgstr ""

#: breakpoint.c:9251
#, possible-c-format
msgid "Make %s pending on future shared library load? "
msgstr ""

#: breakpoint.c:9312 mi/mi-cmd-break.c:343
#, possible-c-format
msgid "Garbage '%s' at end of location"
msgstr ""

#: breakpoint.c:9361
msgid ""
"Multiple breakpoints were set.\n"
"Use the \"delete\" command to delete unwanted breakpoints."
msgstr ""

#: breakpoint.c:9413 linespec.c:2204
#, possible-c-format
msgid "No line %d in file \"%s\"."
msgstr ""

#: breakpoint.c:9485
msgid ""
"Specify the type of breakpoint to set.\n"
"Usage: stop in <function | address>\n"
"       stop at <line>\n"
msgstr ""

#: breakpoint.c:9518
msgid "Usage: stop in <function | address>\n"
msgstr ""

#: breakpoint.c:9550
msgid "Usage: stop at LINE\n"
msgstr ""

#: breakpoint.c:9594
msgid "May only run agent-printf on the target"
msgstr ""

#: breakpoint.c:9719
#, possible-c-format
msgid "Hardware assisted ranged breakpoint %d from %s to %s."
msgstr ""

#: breakpoint.c:9761 breakpoint.c:9834
msgid "Could not find location of the end of the range."
msgstr ""

#: breakpoint.c:9783
msgid "This target does not support hardware ranged breakpoints."
msgstr ""

#: breakpoint.c:9794
msgid "No address range specified."
msgstr ""

#: breakpoint.c:9802
msgid "Too few arguments."
msgstr ""

#: breakpoint.c:9804
msgid "Could not find location of the beginning of the range."
msgstr ""

#: breakpoint.c:9810 breakpoint.c:9839
msgid "Cannot create a ranged breakpoint with multiple locations."
msgstr ""

#: breakpoint.c:9845
msgid "Invalid address range, end precedes start."
msgstr ""

#. Length overflowed.
#: breakpoint.c:9850
msgid "Address range too large."
msgstr ""

#: breakpoint.c:10224 breakpoint.c:10361 breakpoint.c:10417 breakpoint.c:10448
msgid "Invalid hardware watchpoint type."
msgstr ""

#: breakpoint.c:10255
msgid "Invalid watchpoint type."
msgstr ""

#: breakpoint.c:10365
msgid ""
"\n"
"Check the underlying instruction at PC for the memory\n"
"address and value which triggered this watchpoint.\n"
msgstr ""

#: breakpoint.c:10536
msgid "You can specify only one thread."
msgstr ""

#: breakpoint.c:10555
msgid "You can specify only one mask."
msgstr ""

#: breakpoint.c:10598
#, possible-c-format
msgid "Cannot watch constant value `%.*s'."
msgstr ""

#: breakpoint.c:10627
msgid "This target does not support masked watchpoints."
msgstr ""

#: breakpoint.c:10629
msgid "Invalid mask or memory region."
msgstr ""

#: breakpoint.c:10652
msgid "Junk at end of command."
msgstr ""

#: breakpoint.c:11020
msgid "Couldn't get information on specified line."
msgstr ""

#: breakpoint.c:11174
msgid "unsupported or unknown fork kind; cannot catch it"
msgstr ""

#: breakpoint.c:11251 breakpoint.c:11258
msgid "Catch requires an event name."
msgstr ""

#: breakpoint.c:11308
msgid "No source file specified."
msgstr ""

#: breakpoint.c:11402
#, possible-c-format
msgid "No breakpoint at %s."
msgstr ""

#: breakpoint.c:11404
msgid "No breakpoint at this line."
msgstr ""

#: breakpoint.c:11425
msgid "Deleted breakpoint "
msgstr ""

#: breakpoint.c:11427
msgid "Deleted breakpoints "
msgstr ""

#. This is just about all we can do.  We could keep
#. this location on the global list, and try to
#. remove it next time, but there's no particular
#. reason why we will succeed next time.
#.
#. Note that at this point, old_loc->owner is still
#. valid, as delete_breakpoint frees the breakpoint
#. only after calling us.
#: breakpoint.c:11848
#, possible-c-format
msgid "warning: Error removing breakpoint %d\n"
msgstr ""

#: breakpoint.c:12082
#, possible-c-format
msgid " (%s) pending."
msgstr ""

#: breakpoint.c:12087
#, possible-c-format
msgid " (%s,%s) pending."
msgstr ""

#: breakpoint.c:12093
#, possible-c-format
msgid " (%s %s) pending."
msgstr ""

#: breakpoint.c:12440
msgid "Temporary breakpoint"
msgstr ""

#: breakpoint.c:12442
msgid "Breakpoint"
msgstr ""

#: breakpoint.c:12443 breakpoint.c:12756 breakpoint.c:12760 breakpoint.c:12764
#, possible-c-format
msgid " %d"
msgstr ""

#: breakpoint.c:12445
msgid " at gnu-indirect-function resolver"
msgstr ""

#: breakpoint.c:12448
#, possible-c-format
msgid "Hardware assisted breakpoint %d"
msgstr ""

#: breakpoint.c:12451
#, possible-c-format
msgid "Dprintf %d"
msgstr ""

#: breakpoint.c:12472
#, possible-c-format
msgid "unhandled breakpoint type %d"
msgstr ""

#. Not sure how we will get here.
#. GDB should not stop for these breakpoints.
#: breakpoint.c:12585
msgid "Thread Event Breakpoint: gdb should not stop!\n"
msgstr ""

#. By analogy with the thread event, GDB should not stop for these.
#: breakpoint.c:12590
msgid "Overlay Event Breakpoint: gdb should not stop!\n"
msgstr ""

#. These should never be enabled.
#: breakpoint.c:12595
msgid "Longjmp Master Breakpoint: gdb should not stop!\n"
msgstr ""

#. These should never be enabled.
#: breakpoint.c:12600
msgid "std::terminate Master Breakpoint: gdb should not stop!\n"
msgstr ""

#. These should never be enabled.
#: breakpoint.c:12606
msgid "Exception Master Breakpoint: gdb should not stop!\n"
msgstr ""

#: breakpoint.c:12709
msgid "probe not found"
msgstr ""

#: breakpoint.c:12755
msgid "Tracepoint"
msgstr ""

#: breakpoint.c:12759
msgid "Fast tracepoint"
msgstr ""

#: breakpoint.c:12763
msgid "Static tracepoint"
msgstr ""

#: breakpoint.c:12768 breakpoint.c:12787
#, possible-c-format
msgid "unhandled tracepoint type %d"
msgstr ""

#: breakpoint.c:13016
#, possible-c-format
msgid "marker %s not found"
msgstr ""

#: breakpoint.c:13180
msgid "Delete all breakpoints? "
msgstr ""

#: breakpoint.c:13296
#, possible-c-format
msgid "static tracepoint %d changed probed marker from %s to %s"
msgstr ""

#: breakpoint.c:13327
#, possible-c-format
msgid "marker for static tracepoint %d (%s) not found at previous line number"
msgstr ""

#: breakpoint.c:13457
#, possible-c-format
msgid "Could not reset ranged breakpoint %d: multiple locations found\n"
msgstr ""

#: breakpoint.c:13497
#, possible-c-format
msgid "failed to reevaluate condition for breakpoint %d: %s"
msgstr ""

#: breakpoint.c:13838
#, possible-c-format
msgid "Ignore count ignored for tracepoint %d."
msgstr ""

#: breakpoint.c:13847
#, possible-c-format
msgid "Will stop next time breakpoint %d is reached."
msgstr ""

#: breakpoint.c:13851
#, possible-c-format
msgid "Will ignore next crossing of breakpoint %d."
msgstr ""

#: breakpoint.c:13854
#, possible-c-format
msgid "Will ignore next %d crossings of breakpoint %d."
msgstr ""

#: breakpoint.c:13874
msgid "a breakpoint number"
msgstr ""

#: breakpoint.c:13878
#, possible-c-format
msgid "bad breakpoint number: '%s'"
msgstr ""

#: breakpoint.c:13880
msgid "Second argument (specified ignore-count) is missing."
msgstr ""

#: breakpoint.c:13899
#, possible-c-format
msgid "bad breakpoint number at or near '%d'"
msgstr ""

#: breakpoint.c:13918
#, possible-c-format
msgid "No breakpoint number %d.\n"
msgstr ""

#: breakpoint.c:13931
msgid "one or more breakpoint numbers"
msgstr ""

#: breakpoint.c:13957
#, possible-c-format
msgid "Bad breakpoint number '%d'"
msgstr ""

#: breakpoint.c:13960 breakpoint.c:13967
#, possible-c-format
msgid "Bad breakpoint location number '%d'"
msgstr ""

#: breakpoint.c:13994
#, possible-c-format
msgid "Negative breakpoint number '%.*s'"
msgstr ""

#: breakpoint.c:13995
#, possible-c-format
msgid "Negative breakpoint location number '%.*s'"
msgstr ""

#: breakpoint.c:13999
#, possible-c-format
msgid "Bad breakpoint number '%.*s'"
msgstr ""

#: breakpoint.c:14000
#, possible-c-format
msgid "Bad breakpoint location number '%.*s'"
msgstr ""

#: breakpoint.c:14026 breakpoint.c:14076
#, possible-c-format
msgid "Bad breakpoint number at or near: '%s'"
msgstr ""

#: breakpoint.c:14027
#, possible-c-format
msgid "Bad breakpoint location number at or near: '%s'"
msgstr ""

#: breakpoint.c:14038
#, possible-c-format
msgid "Inverted breakpoint range at '%.*s'"
msgstr ""

#: breakpoint.c:14039
#, possible-c-format
msgid "Inverted breakpoint location range at '%.*s'"
msgstr ""

#: breakpoint.c:14264
#, possible-c-format
msgid "Cannot enable watchpoint %d: "
msgstr ""

#: breakpoint.c:14329
msgid "hit count"
msgstr ""

#. In the absence of a source location, fall back to raw
#. address.  Since there is no way to confirm that the address
#. means the same thing as when the trace was started, warn the
#. user.
#: breakpoint.c:14610
#, possible-c-format
msgid "Uploaded tracepoint %d has no source location, using raw address"
msgstr ""

#: breakpoint.c:14619
#, possible-c-format
msgid "Uploaded tracepoint %d condition has no source form, ignoring it"
msgstr ""

#: breakpoint.c:14669
#, possible-c-format
msgid "Uploaded tracepoint %d actions have no source form, ignoring them"
msgstr ""

#: breakpoint.c:14743
msgid "Delete all tracepoints? "
msgstr ""

#: breakpoint.c:14766
#, possible-c-format
msgid "Setting tracepoint %d's passcount to %d\n"
msgstr ""

#: breakpoint.c:14783
msgid "passcount command requires an argument (count + optional TP num)"
msgstr ""

#: breakpoint.c:14879
#, possible-c-format
msgid "bad tracepoint number at or near '%s'\n"
msgstr ""

#: breakpoint.c:14882
msgid "No previous tracepoint\n"
msgstr ""

#: breakpoint.c:14922
msgid "Argument required (file name in which to save)"
msgstr ""

#: breakpoint.c:14948
msgid "Nothing to save."
msgstr ""

#: breakpoint.c:14957
#, possible-c-format
msgid "Unable to open file '%s' for saving (%s)"
msgstr ""

#: breakpoint.c:15025
#, possible-c-format
msgid "Saved to file '%s'.\n"
msgstr ""

#: breakpoint.c:15144
msgid "\"save\" must be followed by the name of a save subcommand.\n"
msgstr ""

#: breakpoint.c:15417
msgid ""
"Set ignore-count of breakpoint number N to COUNT.\n"
"Usage is `ignore N COUNT'."
msgstr ""

#: breakpoint.c:15422
msgid ""
"Set commands to be executed when the given breakpoints are hit.\n"
"Give a space-separated breakpoint list as argument after \"commands\".\n"
"A list element can be a breakpoint number (e.g. `5') or a range of numbers\n"
"(e.g. `5-7').\n"
"With no argument, the targeted breakpoint is the last one set.\n"
"The commands themselves follow starting on the next line.\n"
"Type a line containing \"end\" to indicate the end of them.\n"
"Give \"silent\" as the first line to make the breakpoint silent;\n"
"then no output is printed when it is hit, except what the commands print."
msgstr ""

#: breakpoint.c:15433
msgid ""
"Specify breakpoint number N to break only if COND is true.\n"
"Usage is `condition N COND', where N is an integer and COND is an\n"
"expression to be evaluated whenever breakpoint N is reached."
msgstr ""

#: breakpoint.c:15439
msgid ""
"Set a temporary breakpoint.\n"
"Like \"break\" except the breakpoint is only temporary,\n"
"so it will be deleted when hit.  Equivalent to \"break\" followed\n"
"by using \"enable delete\" on the breakpoint number.\n"
"\n"
msgstr ""

#: breakpoint.c:15448
msgid ""
"Set a hardware assisted breakpoint.\n"
"Like \"break\" except the breakpoint requires hardware support,\n"
"some target hardware may not have this support.\n"
"\n"
msgstr ""

#: breakpoint.c:15456
msgid ""
"Set a temporary hardware assisted breakpoint.\n"
"Like \"hbreak\" except the breakpoint is only temporary,\n"
"so it will be deleted when hit.\n"
"\n"
msgstr ""

#: breakpoint.c:15464
msgid ""
"Enable all or some breakpoints.\n"
"Usage: enable [BREAKPOINTNUM]...\n"
"Give breakpoint numbers (separated by spaces) as arguments.\n"
"With no subcommand, breakpoints are enabled until you command otherwise.\n"
"This is used to cancel the effect of the \"disable\" command.\n"
"With a subcommand you can enable temporarily."
msgstr ""

#: breakpoint.c:15475
msgid ""
"Enable all or some breakpoints.\n"
"Usage: enable breakpoints [BREAKPOINTNUM]...\n"
"Give breakpoint numbers (separated by spaces) as arguments.\n"
"This is used to cancel the effect of the \"disable\" command.\n"
"May be abbreviated to simply \"enable\"."
msgstr ""

#: breakpoint.c:15483
msgid ""
"Enable some breakpoints for one hit.\n"
"Usage: enable breakpoints once BREAKPOINTNUM...\n"
"If a breakpoint is hit while enabled in this fashion, it becomes disabled."
msgstr ""

#: breakpoint.c:15489
msgid ""
"Enable some breakpoints and delete when hit.\n"
"Usage: enable breakpoints delete BREAKPOINTNUM...\n"
"If a breakpoint is hit while enabled in this fashion, it is deleted."
msgstr ""

#: breakpoint.c:15495
msgid ""
"Enable some breakpoints for COUNT hits.\n"
"Usage: enable breakpoints count COUNT BREAKPOINTNUM...\n"
"If a breakpoint is hit while enabled in this fashion,\n"
"the count is decremented; when it reaches zero, the breakpoint is disabled."
msgstr ""

#: breakpoint.c:15502
msgid ""
"Enable some breakpoints and delete when hit.\n"
"Usage: enable delete BREAKPOINTNUM...\n"
"If a breakpoint is hit while enabled in this fashion, it is deleted."
msgstr ""

#: breakpoint.c:15508
msgid ""
"Enable some breakpoints for one hit.\n"
"Usage: enable once BREAKPOINTNUM...\n"
"If a breakpoint is hit while enabled in this fashion, it becomes disabled."
msgstr ""

#: breakpoint.c:15514
msgid ""
"Enable some breakpoints for COUNT hits.\n"
"Usage: enable count COUNT BREAKPOINTNUM...\n"
"If a breakpoint is hit while enabled in this fashion,\n"
"the count is decremented; when it reaches zero, the breakpoint is disabled."
msgstr ""

#: breakpoint.c:15521
msgid ""
"Disable all or some breakpoints.\n"
"Usage: disable [BREAKPOINTNUM]...\n"
"Arguments are breakpoint numbers with spaces in between.\n"
"To disable all breakpoints, give no argument.\n"
"A disabled breakpoint is not forgotten, but has no effect until re-enabled."
msgstr ""

#: breakpoint.c:15531
msgid ""
"Disable all or some breakpoints.\n"
"Usage: disable breakpoints [BREAKPOINTNUM]...\n"
"Arguments are breakpoint numbers with spaces in between.\n"
"To disable all breakpoints, give no argument.\n"
"A disabled breakpoint is not forgotten, but has no effect until re-enabled.\n"
"This command may be abbreviated \"disable\"."
msgstr ""

#: breakpoint.c:15540
msgid ""
"Delete all or some breakpoints.\n"
"Usage: delete [BREAKPOINTNUM]...\n"
"Arguments are breakpoint numbers with spaces in between.\n"
"To delete all breakpoints, give no argument.\n"
"\n"
"Also a prefix command for deletion of other GDB objects."
msgstr ""

#: breakpoint.c:15551
msgid ""
"Delete all or some breakpoints or auto-display expressions.\n"
"Usage: delete breakpoints [BREAKPOINTNUM]...\n"
"Arguments are breakpoint numbers with spaces in between.\n"
"To delete all breakpoints, give no argument.\n"
"This command may be abbreviated \"delete\"."
msgstr ""

#: breakpoint.c:15559
msgid ""
"Clear breakpoint at specified location.\n"
"Argument may be a linespec, explicit, or address location as described "
"below.\n"
"\n"
"With no argument, clears all breakpoints in the line that the selected "
"frame\n"
"is executing in.\n"
"\n"
msgstr ""

#: breakpoint.c:15569
msgid "Set breakpoint at specified location.\n"
msgstr ""

#: breakpoint.c:15581
msgid "Break in function/address or break at a line in the current file."
msgstr ""

#: breakpoint.c:15585
msgid "Break in function or address."
msgstr ""

#: breakpoint.c:15587
msgid "Break at a line in the current file."
msgstr ""

#: breakpoint.c:15588
msgid ""
"Status of user-settable breakpoints, or breakpoint number NUMBER.\n"
"The \"Type\" column indicates one of:\n"
"\tbreakpoint     - normal breakpoint\n"
"\twatchpoint     - watchpoint\n"
"The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to "
"indicate\n"
"the disposition of the breakpoint after it gets hit.  \"dis\" means that "
"the\n"
"breakpoint will be disabled.  The \"Address\" and \"What\" columns indicate "
"the\n"
"address and file/line number respectively.\n"
"\n"
"Convenience variable \"$_\" and default examine address for \"x\"\n"
"are set to the address of the last breakpoint listed unless the command\n"
"is prefixed with \"server \".\n"
"\n"
"Convenience variable \"$bpnum\" contains the number of the last\n"
"breakpoint set."
msgstr ""

#: breakpoint.c:15605
msgid ""
"Status of specified breakpoints (all user-settable breakpoints if no "
"argument).\n"
"The \"Type\" column indicates one of:\n"
"\tbreakpoint     - normal breakpoint\n"
"\twatchpoint     - watchpoint\n"
"The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to "
"indicate\n"
"the disposition of the breakpoint after it gets hit.  \"dis\" means that "
"the\n"
"breakpoint will be disabled.  The \"Address\" and \"What\" columns indicate "
"the\n"
"address and file/line number respectively.\n"
"\n"
"Convenience variable \"$_\" and default examine address for \"x\"\n"
"are set to the address of the last breakpoint listed unless the command\n"
"is prefixed with \"server \".\n"
"\n"
"Convenience variable \"$bpnum\" contains the number of the last\n"
"breakpoint set."
msgstr ""

#: breakpoint.c:15623
msgid ""
"Status of all breakpoints, or breakpoint number NUMBER.\n"
"The \"Type\" column indicates one of:\n"
"\tbreakpoint     - normal breakpoint\n"
"\twatchpoint     - watchpoint\n"
"\tlongjmp        - internal breakpoint used to step through longjmp()\n"
"\tlongjmp resume - internal breakpoint at the target of longjmp()\n"
"\tuntil          - internal breakpoint used by the \"until\" command\n"
"\tfinish         - internal breakpoint used by the \"finish\" command\n"
"The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to "
"indicate\n"
"the disposition of the breakpoint after it gets hit.  \"dis\" means that "
"the\n"
"breakpoint will be disabled.  The \"Address\" and \"What\" columns indicate "
"the\n"
"address and file/line number respectively.\n"
"\n"
"Convenience variable \"$_\" and default examine address for \"x\"\n"
"are set to the address of the last breakpoint listed unless the command\n"
"is prefixed with \"server \".\n"
"\n"
"Convenience variable \"$bpnum\" contains the number of the last\n"
"breakpoint set."
msgstr ""

#: breakpoint.c:15644
msgid "Set catchpoints to catch events."
msgstr ""

#. allow-unknown
#: breakpoint.c:15649
msgid "Set temporary catchpoints to catch events."
msgstr ""

#. allow-unknown
#: breakpoint.c:15654
msgid "Catch calls to fork."
msgstr ""

#: breakpoint.c:15659
msgid "Catch calls to vfork."
msgstr ""

#: breakpoint.c:15664
msgid "Catch calls to exec."
msgstr ""

#: breakpoint.c:15669
msgid ""
"Catch loads of shared libraries.\n"
"Usage: catch load [REGEX]\n"
"If REGEX is given, only stop for libraries matching the regular expression."
msgstr ""

#: breakpoint.c:15676
msgid ""
"Catch unloads of shared libraries.\n"
"Usage: catch unload [REGEX]\n"
"If REGEX is given, only stop for libraries matching the regular expression."
msgstr ""

#: breakpoint.c:15684
msgid ""
"Set a watchpoint for an expression.\n"
"Usage: watch [-l|-location] EXPRESSION\n"
"A watchpoint stops execution of your program whenever the value of\n"
"an expression changes.\n"
"If -l or -location is given, this evaluates EXPRESSION and watches\n"
"the memory to which it refers."
msgstr ""

#: breakpoint.c:15693
msgid ""
"Set a read watchpoint for an expression.\n"
"Usage: rwatch [-l|-location] EXPRESSION\n"
"A watchpoint stops execution of your program whenever the value of\n"
"an expression is read.\n"
"If -l or -location is given, this evaluates EXPRESSION and watches\n"
"the memory to which it refers."
msgstr ""

#: breakpoint.c:15702
msgid ""
"Set a watchpoint for an expression.\n"
"Usage: awatch [-l|-location] EXPRESSION\n"
"A watchpoint stops execution of your program whenever the value of\n"
"an expression is either read or written.\n"
"If -l or -location is given, this evaluates EXPRESSION and watches\n"
"the memory to which it refers."
msgstr ""

#: breakpoint.c:15711
msgid "Status of specified watchpoints (all watchpoints if no argument)."
msgstr ""

#: breakpoint.c:15717
msgid "Set debugger's willingness to use watchpoint hardware."
msgstr ""

#: breakpoint.c:15718
msgid "Show debugger's willingness to use watchpoint hardware."
msgstr ""

#: breakpoint.c:15719
msgid ""
"If zero, gdb will not use hardware for new watchpoints, even if\n"
"such is available.  (However, any hardware watchpoints that were\n"
"created before setting this to nonzero, will continue to use watchpoint\n"
"hardware.)"
msgstr ""

#. Tracepoint manipulation commands.
#: breakpoint.c:15732
msgid ""
"Set a tracepoint at specified location.\n"
"\n"
msgstr ""

#: breakpoint.c:15744
msgid ""
"Set a fast tracepoint at specified location.\n"
"\n"
msgstr ""

#: breakpoint.c:15751
msgid ""
"Set a static tracepoint at location or marker.\n"
"\n"
"strace [LOCATION] [if CONDITION]\n"
"LOCATION may be a linespec, explicit, or address location (described "
"below) \n"
"or -m MARKER_ID.\n"
"\n"
"If a marker id is specified, probe the marker with that name.  With\n"
"no LOCATION, uses current execution address of the selected stack frame.\n"
"Static tracepoints accept an extra collect action -- ``collect $_sdata''.\n"
"This collects arbitrary user data passed in the probe point call to the\n"
"tracing library.  You can inspect it when analyzing the trace buffer,\n"
"by printing the $_sdata variable like any other convenience variable.\n"
"\n"
"CONDITION is a boolean expression.\n"
"\n"
msgstr ""

#: breakpoint.c:15773
msgid ""
"Status of specified tracepoints (all tracepoints if no argument).\n"
"Convenience variable \"$tpnum\" contains the number of the\n"
"last tracepoint set."
msgstr ""

#: breakpoint.c:15780
msgid ""
"Delete specified tracepoints.\n"
"Arguments are tracepoint numbers, separated by spaces.\n"
"No argument means delete all tracepoints."
msgstr ""

#: breakpoint.c:15787
msgid ""
"Disable specified tracepoints.\n"
"Arguments are tracepoint numbers, separated by spaces.\n"
"No argument means disable all tracepoints."
msgstr ""

#: breakpoint.c:15794
msgid ""
"Enable specified tracepoints.\n"
"Arguments are tracepoint numbers, separated by spaces.\n"
"No argument means enable all tracepoints."
msgstr ""

#: breakpoint.c:15801
msgid ""
"Set the passcount for a tracepoint.\n"
"The trace will end when the tracepoint has been passed 'count' times.\n"
"Usage: passcount COUNT TPNUM, where TPNUM may also be \"all\";\n"
"if TPNUM is omitted, passcount refers to the last tracepoint defined."
msgstr ""

#: breakpoint.c:15808
msgid "Save breakpoint definitions as a script."
msgstr ""

#. allow-unknown
#: breakpoint.c:15812
msgid ""
"Save current breakpoint definitions as a script.\n"
"This includes all types of breakpoints (breakpoints, watchpoints,\n"
"catchpoints, tracepoints).  Use the 'source' command in another debug\n"
"session to restore them."
msgstr ""

#: breakpoint.c:15820
msgid ""
"Save current tracepoint definitions as a script.\n"
"Use the 'source' command in another debug session to restore them."
msgstr ""

#. allow-unknown
#: breakpoint.c:15829 breakpoint.c:15835
msgid ""
"Breakpoint specific settings.\n"
"Configure various breakpoint-specific variables such as\n"
"pending breakpoint behavior."
msgstr ""

#: breakpoint.c:15843
msgid "Set debugger's behavior regarding pending breakpoints."
msgstr ""

#: breakpoint.c:15844
msgid "Show debugger's behavior regarding pending breakpoints."
msgstr ""

#: breakpoint.c:15845
msgid ""
"If on, an unrecognized breakpoint location will cause gdb to create a\n"
"pending breakpoint.  If off, an unrecognized breakpoint location results in\n"
"an error.  If auto, an unrecognized breakpoint location results in a\n"
"user-query to see if a pending breakpoint should be created."
msgstr ""

#: breakpoint.c:15858
msgid "Set automatic usage of hardware breakpoints."
msgstr ""

#: breakpoint.c:15859
msgid "Show automatic usage of hardware breakpoints."
msgstr ""

#: breakpoint.c:15860
msgid ""
"If set, the debugger will automatically use hardware breakpoints for\n"
"breakpoints set with \"break\" but falling in read-only memory.  If not "
"set,\n"
"a warning will be emitted for such breakpoints."
msgstr ""

#: breakpoint.c:15870
msgid "Set mode for inserting breakpoints."
msgstr ""

#: breakpoint.c:15871
msgid "Show mode for inserting breakpoints."
msgstr ""

#: breakpoint.c:15872
msgid ""
"When this mode is on, breakpoints are inserted immediately as soon as\n"
"they're created, kept inserted even when execution stops, and removed\n"
"only when the user deletes them.  When this mode is off (the default),\n"
"breakpoints are inserted only when execution continues, and removed\n"
"when execution stops."
msgstr ""

#: breakpoint.c:15885
msgid "Set mode of breakpoint condition evaluation."
msgstr ""

#: breakpoint.c:15886
msgid "Show mode of breakpoint condition evaluation."
msgstr ""

#: breakpoint.c:15887
msgid ""
"When this is set to \"host\", breakpoint conditions will be\n"
"evaluated on the host's side by GDB.  When it is set to \"target\",\n"
"breakpoint conditions will be downloaded to the target (if the target\n"
"supports such feature) and conditions will be evaluated on the target's "
"side.\n"
"If this is set to \"auto\" (default), this will be automatically set to\n"
"\"target\" if it supports condition evaluation, otherwise it will\n"
"be set to \"gdb\""
msgstr ""

#: breakpoint.c:15900
msgid ""
"Set a breakpoint for an address range.\n"
"break-range START-LOCATION, END-LOCATION\n"
"where START-LOCATION and END-LOCATION can be one of the following:\n"
"  LINENUM, for that line in the current file,\n"
"  FILE:LINENUM, for that line in that file,\n"
"  +OFFSET, for that number of lines after the current line\n"
"           or the start of the range\n"
"  FUNCTION, for the first line in that function,\n"
"  FILE:FUNCTION, to distinguish among like-named static functions.\n"
"  *ADDRESS, for the instruction at that address.\n"
"\n"
"The breakpoint will stop execution of the inferior whenever it executes\n"
"an instruction at any address within the [START-LOCATION, END-LOCATION]\n"
"range (including START-LOCATION and END-LOCATION)."
msgstr ""

#: breakpoint.c:15916
msgid ""
"Set a dynamic printf at specified location.\n"
"dprintf location,format string,arg1,arg2,...\n"
"location may be a linespec, explicit, or address location.\n"
"\n"
msgstr ""

#: breakpoint.c:15924
msgid "Set the style of usage for dynamic printf."
msgstr ""

#: breakpoint.c:15925
msgid "Show the style of usage for dynamic printf."
msgstr ""

#: breakpoint.c:15926
msgid ""
"This setting chooses how GDB will do a dynamic printf.\n"
"If the value is \"gdb\", then the printing is done by GDB to its own\n"
"console, as with the \"printf\" command.\n"
"If the value is \"call\", the print is done by calling a function in your\n"
"program; by default printf(), but you can choose a different function or\n"
"output stream by setting dprintf-function and dprintf-channel."
msgstr ""

#: breakpoint.c:15938
msgid "Set the function to use for dynamic printf."
msgstr ""

#: breakpoint.c:15939
msgid "Show the function to use for dynamic printf."
msgstr ""

#: breakpoint.c:15946
msgid "Set the channel to use for dynamic printf."
msgstr ""

#: breakpoint.c:15947
msgid "Show the channel to use for dynamic printf."
msgstr ""

#: breakpoint.c:15953
msgid "Set whether dprintf continues after GDB disconnects."
msgstr ""

#: breakpoint.c:15954
msgid "Show whether dprintf continues after GDB disconnects."
msgstr ""

#: breakpoint.c:15955
msgid ""
"Use this to let dprintf commands continue to hit and produce output\n"
"even if GDB disconnects or detaches from the target."
msgstr ""

#: breakpoint.c:15962
#, possible-c-format
msgid ""
"Target agent only formatted printing, like the C \"printf\" function.\n"
"Usage: agent-printf \"format string\", ARG1, ARG2, ARG3, ..., ARGN\n"
"This supports most C printf format specifications, like %s, %d, etc.\n"
"This is useful for formatted output in user-defined commands."
msgstr ""

#: bsd-kvm.c:70
msgid "Kernel memory interface"
msgstr ""

#: bsd-kvm.c:71
msgid ""
"Use a kernel virtual memory image as a target.\n"
"Optionally specify the filename of a core dump."
msgstr ""

#: bsd-kvm.c:207
#, possible-c-format
msgid "\tUsing the kernel crash dump %s.\n"
msgstr ""

#: bsd-kvm.c:210
msgid "\tUsing the currently running kernel.\n"
msgstr ""

#. i18n: PCB == "Process Control Block".
#: bsd-kvm.c:303
msgid "Cannot find a valid PCB"
msgstr ""

#: bsd-kvm.c:324
msgid "proc address"
msgstr ""

#: bsd-kvm.c:327 bsd-kvm.c:355
msgid "No kernel memory image."
msgstr ""

#. i18n: PCB == "Process Control Block".
#: bsd-kvm.c:352
msgid "pcb address"
msgstr ""

#: bsd-kvm.c:389
msgid "Generic command for manipulating the kernel memory interface."
msgstr ""

#: bsd-kvm.c:395
msgid "Set current context from proc address"
msgstr ""

#. i18n: PCB == "Process Control Block".
#: bsd-kvm.c:399
msgid "Set current context from pcb address"
msgstr ""

#: bsd-uthread.c:38 bsd-uthread.c:39
msgid "BSD user-level threads"
msgstr ""

#: bsd-uthread.c:134
msgid "Bad magic"
msgstr ""

#: btrace.c:1090
#, possible-c-format
msgid "Recorded trace may be corrupted at instruction %u (pc = %s)."
msgstr ""

#: btrace.c:1131
#, possible-c-format
msgid "Recorded trace may be incomplete at instruction %u (pc = %s)."
msgstr ""

#: btrace.c:1231
#, possible-c-format
msgid "Non-contiguous trace at instruction %u (offset = 0x%<PRIx64>)."
msgstr ""

#: btrace.c:1242
#, possible-c-format
msgid "Overflow at instruction %u (offset = 0x%<PRIx64>)."
msgstr ""

#: btrace.c:1276
#, possible-c-format
msgid ""
"Non-contiguous trace at instruction %u (offset = 0x%<PRIx64>, pc = 0x"
"%<PRIx64>)."
msgstr ""

#: btrace.c:1293
#, possible-c-format
msgid "Overflow at instruction %u (offset = 0x%<PRIx64>, pc = 0x%<PRIx64>)."
msgstr ""

#: btrace.c:1319 btrace.c:3003
#, possible-c-format
msgid "Failed to synchronize onto the Intel Processor Trace stream: %s."
msgstr ""

#: btrace.c:1354
#, possible-c-format
msgid ""
"Decode error (%d) at instruction %u (offset = 0x%<PRIx64>, pc = 0x"
"%<PRIx64>): %s."
msgstr ""

#: btrace.c:1456 btrace.c:1474 btrace.c:3044
#, possible-c-format
msgid "Failed to configure the Intel Processor Trace decoder: %s."
msgstr ""

#: btrace.c:1462 btrace.c:3050
msgid "Failed to allocate the Intel Processor Trace decoder."
msgstr ""

#: btrace.c:1470
msgid "Failed to configure the Intel Processor Trace decoder."
msgstr ""

#: btrace.c:1500
msgid "Unexpected branch trace format."
msgstr ""

#: btrace.c:1536 btrace.c:1794 gdbsupport/btrace-common.c:85
#: gdbsupport/btrace-common.c:105 gdbsupport/btrace-common.c:189
#: nat/linux-btrace.c:923 record-btrace.c:544
msgid "Unkown branch trace format."
msgstr ""

#: btrace.c:1599 nat/linux-btrace.c:681
msgid "Intel Processor Trace support was disabled at compile time."
msgstr ""

#: btrace.c:1735
msgid "Error while trying to read delta trace.  Falling back to a full read."
msgstr ""

#: btrace.c:1849
msgid "instruction overflow"
msgstr ""

#: btrace.c:1852
msgid "unknown instruction"
msgstr ""

#: btrace.c:1864
msgid "trace decode cancelled"
msgstr ""

#: btrace.c:1867 dwarf-index-cache.c:275
msgid "disabled"
msgstr ""

#: btrace.c:1870
msgid "overflow"
msgstr ""

#: btrace.c:1951
msgid "Failed to read branch trace."
msgstr ""

#: btrace.c:2016
#, possible-c-format
msgid "Unsupported btrace version: \"%s\""
msgstr ""

#: btrace.c:2043
msgid "Btrace format error."
msgstr ""

#: btrace.c:2062
msgid "Bad raw data size."
msgstr ""

#: btrace.c:2078
msgid "Bad hex encoding."
msgstr ""

#: btrace.c:2209
msgid "btrace"
msgstr ""

#: btrace.c:2212
msgid "Error parsing branch trace."
msgstr ""

#: btrace.c:2219
msgid "Cannot process branch trace.  XML support was disabled at compile time."
msgstr ""

#: btrace.c:2306
msgid "btrace-conf"
msgstr ""

#: btrace.c:2309
msgid "Error parsing branch trace configuration."
msgstr ""

#: btrace.c:2313
msgid ""
"Cannot process the branch trace configuration.  XML support was disabled at "
"compile time."
msgstr ""

#: btrace.c:2365 btrace.c:2382 btrace.c:2654 btrace.c:2667 record-btrace.c:260
#: record-btrace.c:2044 record-btrace.c:2796
msgid "No trace."
msgstr ""

#: btrace.c:2998
#, possible-c-format
msgid "Error at trace offset 0x%<PRIx64>: %s."
msgstr ""

#: btrace.c:3187 btrace.c:3206 record.c:439 record.c:459
#, possible-c-format
msgid "Expected positive number, got: %s."
msgstr ""

#: btrace.c:3191
msgid "Number too big."
msgstr ""

#: btrace.c:3220 record.c:409 record.c:421 record.c:472
#, possible-c-format
msgid "Junk after argument: %s."
msgstr ""

#: btrace.c:3233 btrace.c:3336 btrace.c:3355 btrace.c:3418 record-btrace.c:251
#: record-btrace.c:561 record-btrace.c:1379
msgid "No thread."
msgstr ""

#: btrace.c:3241
msgid "No trace.\n"
msgstr ""

#: btrace.c:3265
#, possible-c-format
msgid "'%u' is out of range."
msgstr ""

#: btrace.c:3333 btrace.c:3352 btrace.c:3415 record-btrace.c:2880
#: record-btrace.c:2901 record-btrace.c:2922
msgid "Invalid argument."
msgstr ""

#: btrace.c:3426
msgid "No btrace configuration."
msgstr ""

#: btrace.c:3428
#, possible-c-format
msgid "Format: %s.\n"
msgstr ""

#: btrace.c:3437 btrace.c:3452
#, possible-c-format
msgid "Number of packets: %zu.\n"
msgstr ""

#: btrace.c:3447
#, possible-c-format
msgid "Version: %u.%u.%u%s.\n"
msgstr ""

#: btrace.c:3468
#, possible-c-format
msgid "Skip PAD packets is %s.\n"
msgstr ""

#: btrace.c:3478
msgid "Info about branch tracing data."
msgstr ""

#: btrace.c:3481
msgid "Branch tracing maintenance commands."
msgstr ""

#: btrace.c:3485
msgid "Set branch tracing specific variables."
msgstr ""

#: btrace.c:3490
msgid "Set Intel Processor Trace specific variables."
msgstr ""

#: btrace.c:3495
msgid "Show branch tracing specific variables."
msgstr ""

#: btrace.c:3500
msgid "Show Intel Processor Trace specific variables."
msgstr ""

#: btrace.c:3506
msgid "Set whether PAD packets should be skipped in the btrace packet history."
msgstr ""

#: btrace.c:3507
msgid ""
"Show whether PAD packets should be skipped in the btrace packet history."
msgstr ""

#: btrace.c:3508
msgid "When enabled, PAD packets are ignored in the btrace packet history."
msgstr ""

#: btrace.c:3515
msgid ""
"Print the raw branch tracing data.\n"
"With no argument, print ten more packets after the previous ten-line print.\n"
"With '-' as argument print ten packets before a previous ten-line print.\n"
"One argument specifies the starting packet of a ten-line print.\n"
"Two arguments with comma between specify starting and ending packets to "
"print.\n"
"Preceded with '+'/'-' the second argument specifies the distance from the "
"first."
msgstr ""

#: btrace.c:3527
msgid ""
"Clears the branch tracing packet history.\n"
"Discards the raw branch tracing data but not the execution history data."
msgstr ""

#: btrace.c:3532
msgid ""
"Clears the branch tracing data.\n"
"Discards the raw branch tracing data and the execution history data.\n"
"The next 'record' command will fetch the branch tracing data anew."
msgstr ""

#: build-id.c:57
#, possible-c-format
msgid "File \"%s\" has no build-id, file skipped"
msgstr ""

#: build-id.c:61
#, possible-c-format
msgid "File \"%s\" has a different build-id, file skipped"
msgstr ""

#: build-id.c:79 symfile.c:1288
#, possible-c-format
msgid "  Trying %s..."
msgstr ""

#: build-id.c:91
msgid " no, unable to compute real path\n"
msgstr ""

#: build-id.c:102 symfile.c:1297
msgid " no, unable to open.\n"
msgstr ""

#: build-id.c:110
msgid " no, build-id does not match.\n"
msgstr ""

#: build-id.c:116 symfile.c:1371
msgid " yes!\n"
msgstr ""

#: build-id.c:209
#, possible-c-format
msgid ""
"\n"
"Looking for separate debug info (build-id) for %s\n"
msgstr ""

#: build-id.c:218
#, possible-c-format
msgid "\"%s\": separate debug info file has no debug info"
msgstr ""

#: buildsym.c:320
#, possible-c-format
msgid "block end address less than block start address in %s (patched it)"
msgstr ""

#: buildsym.c:326
#, possible-c-format
msgid "block end address %s less than block start address %s (patched it)"
msgstr ""

#: buildsym.c:358
#, possible-c-format
msgid "inner block not inside outer block in %s"
msgstr ""

#: buildsym.c:363
#, possible-c-format
msgid "inner block (%s-%s) not inside outer block (%s-%s)"
msgstr ""

#: buildsym.c:489
#, possible-c-format
msgid "block at %s out of order"
msgstr ""

#. This is said to happen with SCO.  The old coffread.c
#. code simply emptied the context stack, so we do the
#. same.  FIXME: Find out why it is happening.  This is not
#. believed to happen in most cases (even for coffread.c);
#. it used to be an abort().
#: buildsym.c:850
msgid "Context stack not empty in end_symtab"
msgstr ""

#: buildsym.c:1191
msgid "Context stack not empty in augment_type_symtab"
msgstr ""

#: buildsym.c:1193
msgid "Blocks in a type symtab"
msgstr ""

#: buildsym.c:1195
msgid "Macro in a type symtab"
msgstr ""

#: buildsym.c:1197
msgid "Line numbers recorded in a type symtab"
msgstr ""

#: c-exp.y:481
#, possible-c-format
msgid "%s is not an ObjC Class"
msgstr ""

#: c-exp.y:912
msgid "Undefined string concatenation."
msgstr ""

#: c-exp.y:988 go-exp.y:539
#, possible-c-format
msgid "@entry can be used only for function parameters, not for \"%s\""
msgstr ""

#: c-exp.y:1006 eval.c:1367 m2-exp.y:548 p-exp.y:656
#, possible-c-format
msgid "No symbol \"%s\" in specified context."
msgstr ""

#: c-exp.y:1022 c-exp.y:1038 d-exp.y:502 p-exp.y:671
#, possible-c-format
msgid "`%s' is not defined as an aggregate type."
msgstr ""

#: c-exp.y:1057
#, possible-c-format
msgid "No type \"%s\" within class or namespace \"%s\"."
msgstr ""

#: c-exp.y:1089 c-exp.y:1142 d-exp.y:455 d-exp.y:495 f-exp.y:508 go-exp.y:582
#: m2-exp.y:592 p-exp.y:710 p-exp.y:769 printcmd.c:1472 valops.c:2700
#, possible-c-format
msgid "No symbol \"%s\" in current context."
msgstr ""

#: c-exp.y:1818
msgid "parameter types following 'void'"
msgstr ""

#: c-exp.y:1821
msgid "'void' invalid as parameter type"
msgstr ""

#: c-exp.y:1997 d-exp.y:819 go-exp.y:787 p-exp.y:970
msgid "Numeric constant too large."
msgstr ""

#: c-exp.y:2099
msgid "\\x escape without a following hex digit"
msgstr ""

#: c-exp.y:2149
#, possible-c-format
msgid "\\%c escape without a following hex digit"
msgstr ""

#: c-exp.y:2325 d-exp.y:930 go-exp.y:921 macroexp.c:410 p-exp.y:1373
msgid "Unterminated string in expression."
msgstr ""

#: c-exp.y:2327 d-exp.y:932 go-exp.y:923 macroexp.c:353 p-exp.y:1204
msgid "Unmatched single quote."
msgstr ""

#: c-exp.y:2696 d-exp.y:1176 f-exp.y:1215 go-exp.y:1148 m2-exp.y:918
#: p-exp.y:1300
#, possible-c-format
msgid "Invalid number \"%s\"."
msgstr ""

#: c-exp.y:2769 d-exp.y:1228 go-exp.y:1200 p-exp.y:1191
msgid "Empty character constant."
msgstr ""

#: c-exp.y:2779 d-exp.y:1236 go-exp.y:1208 p-exp.y:1210
msgid "Invalid character constant."
msgstr ""

#. We must have come across a bad character (e.g. ';').
#: c-exp.y:2787 f-exp.y:1249 go-exp.y:1217 m2-exp.y:927 p-exp.y:1385
#, possible-c-format
msgid "Invalid character '%c' in expression."
msgstr ""

#: c-exp.y:3109
msgid "not reached"
msgstr ""

#: c-exp.y:3378 d-exp.y:1647 f-exp.y:1369 go-exp.y:1582 m2-exp.y:1052
#: p-exp.y:1749
#, possible-c-format
msgid "A %s in expression, near `%s'."
msgstr ""

#: c-lang.c:65 c-lang.c:623
msgid "unhandled c_string_type"
msgstr ""

#: c-lang.c:328 eval.c:3093 valops.c:1425 valops.c:1440 valops.c:1489
msgid "Attempt to take address of value not located in memory."
msgstr ""

#: c-lang.c:382
#, possible-c-format
msgid "Trying to read string with inappropriate type `%s'."
msgstr ""

#: c-lang.c:386
msgid "Trying to read string with inappropriate type."
msgstr ""

#: c-lang.c:487
msgid "Malformed escape sequence"
msgstr ""

#: c-lang.c:514
msgid "\\x used with no following hex digits."
msgstr ""

#: c-lang.c:536
msgid "\\u used with no following hex digits"
msgstr ""

#: c-lang.c:681
msgid "Could not convert character constant to target character set"
msgstr ""

#. To avoid memory corruption.
#: c-lang.c:707 eval.c:1483
msgid "Too many array elements"
msgstr ""

#: c-typeprint.c:470
msgid "type not handled in c_type_print_varspec_prefix()"
msgstr ""

#: c-typeprint.c:846
msgid "type not handled in c_type_print_varspec_suffix()"
msgstr ""

#: c-typeprint.c:883
#, possible-c-format
msgid "[with %s = "
msgstr ""

#: c-typeprint.c:897
msgid "] "
msgstr ""

#: c-typeprint.c:1118 c-typeprint.c:1628
#, possible-c-format
msgid "%p[<incomplete type>%p]\n"
msgstr ""

#: c-typeprint.c:1122 c-typeprint.c:1632
#, possible-c-format
msgid "%p[<no data fields>%p]\n"
msgstr ""

#: c-typeprint.c:1281
#, possible-c-format
msgid "%p[<undefined type>%p] %s;\n"
msgstr ""

#: c-typeprint.c:1331
#, possible-c-format
msgid "<badly mangled name '%s'>"
msgstr ""

#: c-typeprint.c:1470 m2-typeprint.c:85
msgid "<type unknown>"
msgstr ""

#: c-typeprint.c:1517
msgid "<unnamed typedef>"
msgstr ""

#: c-typeprint.c:1667
msgid "struct <unknown>"
msgstr ""

#. This should not occur.
#: c-typeprint.c:1676
msgid "<range type>"
msgstr ""

#: c-typeprint.c:1699
#, possible-c-format
msgid "<invalid type code %d>"
msgstr ""

#: c-valprint.c:253 valprint.c:441
msgid "Could not determine the array high bound"
msgstr ""

#: c-valprint.c:321
#, possible-c-format
msgid "%d vtable entries"
msgstr ""

#: c-valprint.c:672
msgid " [incomplete object]"
msgstr ""

#. The names of varobjs representing anonymous structs or unions.
#: c-varobj.c:27
msgid "<anonymous struct>"
msgstr ""

#: c-varobj.c:28
msgid "<anonymous union>"
msgstr ""

#: charset.c:236
#, possible-c-format
msgid "The host character set is \"auto; currently %s\".\n"
msgstr ""

#: charset.c:239
#, possible-c-format
msgid "The host character set is \"%s\".\n"
msgstr ""

#: charset.c:249
#, possible-c-format
msgid "The target character set is \"auto; currently %s\".\n"
msgstr ""

#: charset.c:253
#, possible-c-format
msgid "The target character set is \"%s\".\n"
msgstr ""

#: charset.c:266
#, possible-c-format
msgid "The target wide character set is \"auto; currently %s\".\n"
msgstr ""

#: charset.c:270
#, possible-c-format
msgid "The target wide character set is \"%s\".\n"
msgstr ""

#: charset.c:351 charset.c:357
#, possible-c-format
msgid "Cannot convert between character sets `%s' and `%s'"
msgstr ""

#: charset.c:491 charset.c:612
msgid "Converting character sets"
msgstr ""

#: charset.c:562
#, possible-c-format
msgid "Could not convert character to `%s' character set"
msgstr ""

#: charset.c:593 charset.c:688
msgid "Internal error while converting character sets"
msgstr ""

#. No valid charset found, generate error here.
#: charset.c:992
msgid "Unable to find a vaild charset for string conversions"
msgstr ""

#: charset.c:1035
msgid "Set the host and target character sets."
msgstr ""

#: charset.c:1036
msgid "Show the host and target character sets."
msgstr ""

#: charset.c:1037
msgid ""
"The `host character set' is the one used by the system GDB is running on.\n"
"The `target character set' is the one used by the program being debugged.\n"
"You may only use supersets of ASCII for your host character set; GDB does\n"
"not support any others.\n"
"To see a list of the character sets GDB supports, type `set charset <TAB>'."
msgstr ""

#: charset.c:1051
msgid "Set the host character set."
msgstr ""

#: charset.c:1052
msgid "Show the host character set."
msgstr ""

#: charset.c:1053
msgid ""
"The `host character set' is the one used by the system GDB is running on.\n"
"You may only use supersets of ASCII for your host character set; GDB does\n"
"not support any others.\n"
"To see a list of the character sets GDB supports, type `set host-charset "
"<TAB>'."
msgstr ""

#: charset.c:1063
msgid "Set the target character set."
msgstr ""

#: charset.c:1064
msgid "Show the target character set."
msgstr ""

#: charset.c:1065
msgid ""
"The `target character set' is the one used by the program being debugged.\n"
"GDB translates characters and strings between the host and target\n"
"character sets as needed.\n"
"To see a list of the character sets GDB supports, type `set target-"
"charset'<TAB>"
msgstr ""

#: charset.c:1076
msgid "Set the target wide character set."
msgstr ""

#: charset.c:1077
msgid "Show the target wide character set."
msgstr ""

#: charset.c:1078
msgid ""
"The `target wide character set' is the one used by the program being "
"debugged.\n"
"In particular it is the encoding used by `wchar_t'.\n"
"GDB translates characters and strings between the host and target\n"
"character sets as needed.\n"
"To see a list of the character sets GDB supports, type\n"
"`set target-wide-charset'<TAB>"
msgstr ""

#: cli/cli-utils.c:43
msgid "History value must have integer type."
msgstr ""

#: cli/cli-utils.c:55
#, possible-c-format
msgid "Convenience variable $%s does not have integer value."
msgstr ""

#. There is no number here.  (e.g. "cond a == b").
#: cli/cli-utils.c:66
#, possible-c-format
msgid "Expected integer at: %s"
msgstr ""

#: cli/cli-utils.c:72
#, possible-c-format
msgid "Trailing junk at: %s"
msgstr ""

#: cli/cli-utils.c:103
msgid "History value must have integer type.\n"
msgstr ""

#: cli/cli-utils.c:125
msgid "Convenience variable must have integer value.\n"
msgstr ""

#: cli/cli-utils.c:188
#, possible-c-format
msgid "Unrecognized option '%s' to %s command.  Try \"help %s\"."
msgstr ""

#: cli/cli-utils.c:200
#, possible-c-format
msgid ""
"%sIf NAMEREGEXP is provided, only prints the %s whose name\n"
"matches NAMEREGEXP.\n"
"If -t TYPEREGEXP is provided, only prints the %s whose type\n"
"matches TYPEREGEXP.  Note that the matching is done with the type\n"
"printed by the 'whatis' command.\n"
"By default, the command might produce headers and/or messages indicating\n"
"why no %s can be printed.\n"
"The flag -q disables the production of these headers and messages.%s"
msgstr ""

#: cli/cli-utils.c:210
msgid ""
"\n"
"By default, the command will include non-debug symbols in the output;\n"
"these can be excluded using the -n flag."
msgstr ""

#: cli/cli-utils.c:282
msgid "inverted range"
msgstr ""

#: cli/cli-utils.c:298 cli/cli-utils.c:304
msgid "negative value"
msgstr ""

#: cli/cli-utils.c:356 cli/cli-utils.c:362
msgid "Arguments must be numbers or '$' variables."
msgstr ""

#: cli/cli-utils.c:439
#, possible-c-format
msgid "%s: -c and -s are mutually exclusive"
msgstr ""

#: cli/cli-option.c:192 cli/cli-option.c:238
#, possible-c-format
msgid "Unrecognized option at: %s"
msgstr ""

#: cli/cli-option.c:222
#, possible-c-format
msgid "Ambiguous option at: -%s"
msgstr ""

#: cli/cli-option.c:316
#, possible-c-format
msgid "Value given for `-%s' is not a boolean: %.*s"
msgstr ""

#. Treat e.g., "maint test-options -string --" as if there
#. was no argument after "-string".
#: cli/cli-option.c:433 cli/cli-option.c:439
#, possible-c-format
msgid "-%s requires an argument"
msgstr ""

#. Not yet.
#: cli/cli-option.c:448
msgid "option type not supported"
msgstr ""

#: cli/cli-option.c:828
msgid "option type not handled"
msgstr ""

#: cli/cli-cmds.c:191
#, possible-c-format
msgid "Argument required (%s)."
msgstr ""

#: cli/cli-cmds.c:201
msgid "\"info\" must be followed by the name of an info command.\n"
msgstr ""

#: cli/cli-cmds.c:221
msgid "Missing arguments."
msgstr ""

#: cli/cli-cmds.c:227
msgid "Missing setting before '--' delimiter"
msgstr ""

#: cli/cli-cmds.c:238
msgid "Cannot use this setting with the \"with\" command"
msgstr ""

#: cli/cli-cmds.c:269
#, possible-c-format
msgid "Couldn't restore setting: %s"
msgstr ""

#: cli/cli-cmds.c:352
msgid "max-completions is zero, completion is disabled.\n"
msgstr ""

#. ARG_PREFIX and WORD are included in the output so that emacs
#. will include the message in the output.
#: cli/cli-cmds.c:391
#, possible-c-format
msgid "%s%s %s\n"
msgstr ""

#: cli/cli-cmds.c:434 cli/cli-script.c:1444 infcmd.c:1215 infcmd.c:1232
#: infcmd.c:1328 infcmd.c:1943 infcmd.c:2484 symfile.c:1092 symfile.c:1251
#: symfile.c:2355 symfile.c:2442 tracepoint.c:2064 tracepoint.c:2070
msgid "Not confirmed."
msgstr ""

#: cli/cli-cmds.c:445
#, possible-c-format
msgid "The \"pwd\" command does not take an argument: %s"
msgstr ""

#: cli/cli-cmds.c:450
#, possible-c-format
msgid "Error finding name of working directory: %s"
msgstr ""

#: cli/cli-cmds.c:454
#, possible-c-format
msgid ""
"Working directory %ps\n"
" (canonically %ps).\n"
msgstr ""

#: cli/cli-cmds.c:459
#, possible-c-format
msgid "Working directory %ps.\n"
msgstr ""

#: cli/cli-cmds.c:575
#, possible-c-format
msgid "Script filename extension recognition is \"%s\".\n"
msgstr ""

#: cli/cli-cmds.c:673
msgid "source command requires file name of file to source."
msgstr ""

#: cli/cli-cmds.c:806
#, possible-c-format
msgid "unexpected shell command exit status %d"
msgstr ""

#: cli/cli-cmds.c:857
msgid "Fork failed"
msgstr ""

#: cli/cli-cmds.c:891
msgid "No default source file yet."
msgstr ""

#: cli/cli-cmds.c:915
msgid "Specified line is ambiguous:\n"
msgstr ""

#: cli/cli-cmds.c:922 cli/cli-cmds.c:1247
msgid "Junk at end of line specification."
msgstr ""

#: cli/cli-cmds.c:933 cli/cli-cmds.c:1265
#, possible-c-format
msgid "No source file for address %s."
msgstr ""

#: cli/cli-cmds.c:955 cli/cli-cmds.c:1286
#, possible-c-format
msgid "No line number known for %s."
msgstr ""

#: cli/cli-cmds.c:989
msgid ""
"Indicates to use the specified delimiter string to separate\n"
"COMMAND from SHELL_COMMAND, in alternative to |.  This is useful in\n"
"case COMMAND contains a | character."
msgstr ""

#: cli/cli-cmds.c:1022
msgid "Missing COMMAND"
msgstr ""

#: cli/cli-cmds.c:1027
msgid "Missing delimiter before SHELL_COMMAND"
msgstr ""

#: cli/cli-cmds.c:1038
msgid "Missing SHELL_COMMAND"
msgstr ""

#: cli/cli-cmds.c:1043
#, possible-c-format
msgid "Error launching \"%s\""
msgstr ""

#: cli/cli-cmds.c:1060
#, possible-c-format
msgid "shell command \"%s\" failed: %s"
msgstr ""

#: cli/cli-cmds.c:1148
#, possible-c-format
msgid "Already at the start of %s."
msgstr ""

#: cli/cli-cmds.c:1207
#, possible-c-format
msgid "Specified first line '%.*s' is ambiguous:\n"
msgstr ""

#: cli/cli-cmds.c:1238
#, possible-c-format
msgid "Specified last line '%s' is ambiguous:\n"
msgstr ""

#: cli/cli-cmds.c:1251
msgid "Specified first and last lines are in different files."
msgstr ""

#: cli/cli-cmds.c:1253
msgid "Two empty args do not say what lines to list."
msgstr ""

#: cli/cli-cmds.c:1295 cli/cli-cmds.c:1303
msgid "No default source file yet.  Do \"help list\"."
msgstr ""

#: cli/cli-cmds.c:1362
#, possible-c-format
msgid "Address range %s to %s:\n"
msgstr ""

#: cli/cli-cmds.c:1391 dwarf2loc.c:574 dwarf2loc.c:2032 dwarf2loc.c:2068
#: python/py-symbol.c:393 python/py-symbol.c:501 stack.c:2525 stack.c:2636
#: valops.c:1291
msgid "No frame selected."
msgstr ""

#: cli/cli-cmds.c:1395
msgid "No function contains program counter for selected frame."
msgstr ""

#: cli/cli-cmds.c:1452 record.c:494 record.c:632
msgid "Missing modifier."
msgstr ""

#: cli/cli-cmds.c:1468
msgid "Invalid disassembly modifier."
msgstr ""

#: cli/cli-cmds.c:1477
msgid "Cannot specify both /m and /s."
msgstr ""

#: cli/cli-cmds.c:1493
msgid "No function contains specified address."
msgstr ""

#: cli/cli-cmds.c:1547
msgid "Not a user command."
msgstr ""

#: cli/cli-cmds.c:1569
msgid "REGEXP string is empty"
msgstr ""

#: cli/cli-cmds.c:1572
msgid "Error in regular expression"
msgstr ""

#: cli/cli-cmds.c:1629
msgid "Usage: alias [-a] [--] ALIAS = COMMAND"
msgstr ""

#: cli/cli-cmds.c:1677
#, possible-c-format
msgid "Invalid command name: %s"
msgstr ""

#: cli/cli-cmds.c:1679
#, possible-c-format
msgid "Invalid command element name: %s"
msgstr ""

#: cli/cli-cmds.c:1693
#, possible-c-format
msgid "Invalid command to alias to: %s"
msgstr ""

#: cli/cli-cmds.c:1699
#, possible-c-format
msgid "Alias already exists: %s"
msgstr ""

#: cli/cli-cmds.c:1722
msgid "Mismatched command length between ALIAS and COMMAND."
msgstr ""

#: cli/cli-cmds.c:1741
msgid "ALIAS and COMMAND prefixes do not match."
msgstr ""

#: cli/cli-cmds.c:1762
#, possible-c-format
msgid "file: \"%s\", line number: %d, symbol: \"%s\"\n"
msgstr ""

#: cli/cli-cmds.c:1850
msgid "\"set debug\" must be followed by the name of a debug subcommand.\n"
msgstr ""

#: cli/cli-cmds.c:1874
#, possible-c-format
msgid "Verbose printing of informational messages is %s.\n"
msgstr ""

#: cli/cli-cmds.c:1877
#, possible-c-format
msgid "Verbosity is %s.\n"
msgstr ""

#: cli/cli-cmds.c:1884
#, possible-c-format
msgid "History expansion on command input is %s.\n"
msgstr ""

#: cli/cli-cmds.c:1892
#, possible-c-format
msgid "Debugging of remote protocol is %s.\n"
msgstr ""

#: cli/cli-cmds.c:1901
#, possible-c-format
msgid "Timeout limit to wait for target to respond is %s.\n"
msgstr ""

#: cli/cli-cmds.c:1910
#, possible-c-format
msgid "The max call depth for user-defined commands is %s.\n"
msgstr ""

#: cli/cli-cmds.c:1924
#, possible-c-format
msgid "You must provide an argument to %s"
msgstr ""

#: cli/cli-cmds.c:1926
#, possible-c-format
msgid "You can only provide one argument to %s"
msgstr ""

#: cli/cli-cmds.c:1932
#, possible-c-format
msgid "First argument of %s must be a string."
msgstr ""

#: cli/cli-cmds.c:1938
#, possible-c-format
msgid "First argument of %s must be a valid setting of the 'show' command."
msgstr ""

#. Define the classes of commands.
#. They will appear in the help list in alphabetical order.
#: cli/cli-cmds.c:2116
msgid ""
"Maintenance commands.\n"
"Some gdb commands are provided just for use by gdb maintainers.\n"
"These commands are subject to frequent change, and may not be as\n"
"well documented as user commands."
msgstr ""

#: cli/cli-cmds.c:2122
msgid "Obscure features."
msgstr ""

#: cli/cli-cmds.c:2124
msgid "Aliases of other commands."
msgstr ""

#: cli/cli-cmds.c:2125
msgid ""
"User-defined commands.\n"
"The commands in this class are those defined by the user.\n"
"Use the \"define\" command to define a command."
msgstr ""

#: cli/cli-cmds.c:2129
msgid "Support facilities."
msgstr ""

#: cli/cli-cmds.c:2131
msgid "Status inquiries."
msgstr ""

#: cli/cli-cmds.c:2132
msgid "Specifying and examining files."
msgstr ""

#: cli/cli-cmds.c:2135
msgid "Making program stop at certain points."
msgstr ""

#: cli/cli-cmds.c:2136
msgid "Examining data."
msgstr ""

#: cli/cli-cmds.c:2137
msgid ""
"Examining the stack.\n"
"The stack is made up of stack frames.  Gdb assigns numbers to stack frames\n"
"counting from zero for the innermost (currently executing) frame.\n"
"\n"
"At any time gdb identifies one frame as the \"selected\" frame.\n"
"Variable lookups are done with respect to the selected frame.\n"
"When the program being debugged stops, gdb selects the innermost frame.\n"
"The commands below can be used to select other frames by number or address."
msgstr ""

#: cli/cli-cmds.c:2146
msgid "Running the program."
msgstr ""

#. Define general commands.
#: cli/cli-cmds.c:2150
msgid ""
"Print working directory.\n"
"This is used for your program as well."
msgstr ""

#: cli/cli-cmds.c:2154
msgid ""
"Set working directory to DIR for debugger.\n"
"The debugger's current working directory specifies where scripts and other\n"
"files that can be loaded by GDB are located.\n"
"In order to change the inferior's current working directory, the "
"recommended\n"
"way is to use the \"set cwd\" command."
msgstr ""

#: cli/cli-cmds.c:2162
msgid ""
"Print a constant string.  Give string as argument.\n"
"C escape sequences may be used in the argument.\n"
"No newline is added at the end of the argument;\n"
"use \"\\n\" if you want a newline to be printed.\n"
"Since leading and trailing whitespace are ignored in command arguments,\n"
"if you want to print some you must use \"\\\" before leading whitespace\n"
"to be printed or after trailing whitespace."
msgstr ""

#: cli/cli-cmds.c:2172
msgid "Set mode for script filename extension recognition."
msgstr ""

#: cli/cli-cmds.c:2173
msgid "Show mode for script filename extension recognition."
msgstr ""

#: cli/cli-cmds.c:2174
msgid ""
"off  == no filename extension recognition (all sourced files are GDB "
"scripts)\n"
"soft == evaluate script according to filename extension, fallback to GDB "
"script\n"
"strict == evaluate script according to filename extension, error if not "
"supported"
msgstr ""

#: cli/cli-cmds.c:2184
msgid ""
"Exit gdb.\n"
"Usage: quit [EXPR]\n"
"The optional expression EXPR, if present, is evaluated and the result\n"
"used as GDB's exit code.  The default is zero."
msgstr ""

#: cli/cli-cmds.c:2190
msgid "Print list of commands."
msgstr ""

#: cli/cli-cmds.c:2195 top.c:1939
msgid "Set verbosity."
msgstr ""

#: cli/cli-cmds.c:2196 top.c:1940
msgid "Show verbosity."
msgstr ""

#: cli/cli-cmds.c:2203
msgid "Generic command for setting command history parameters."
msgstr ""

#: cli/cli-cmds.c:2206
msgid "Generic command for showing command history parameters."
msgstr ""

#: cli/cli-cmds.c:2209
msgid "Set history expansion on command input."
msgstr ""

#: cli/cli-cmds.c:2210
msgid "Show history expansion on command input."
msgstr ""

#: cli/cli-cmds.c:2211
msgid "Without an argument, history expansion is enabled."
msgstr ""

#: cli/cli-cmds.c:2217
msgid "Generic command for showing things about the program being debugged."
msgstr ""

#: cli/cli-cmds.c:2224
msgid "List the completions for the rest of the line as a command."
msgstr ""

#: cli/cli-cmds.c:2226
msgid "Generic command for showing things about the debugger."
msgstr ""

#. Another way to get at the same thing.
#: cli/cli-cmds.c:2230
msgid "Show all GDB settings."
msgstr ""

#: cli/cli-cmds.c:2232
msgid ""
"Temporarily set SETTING to VALUE, run COMMAND, and restore SETTING.\n"
"Usage: with SETTING [VALUE] [-- COMMAND]\n"
"Usage: w SETTING [VALUE] [-- COMMAND]\n"
"With no COMMAND, repeats the last executed command.\n"
"\n"
"SETTING is any setting you can change with the \"set\" subcommands.\n"
"E.g.:\n"
"  with language pascal -- print obj\n"
"  with print elements unlimited -- print obj\n"
"\n"
"You can change multiple settings using nested with, and use\n"
"abbreviations for commands and/or values.  E.g.:\n"
"  w la p -- w p el u -- p obj"
msgstr ""

#: cli/cli-cmds.c:2249
msgid ""
"$_gdb_setting_str - returns the value of a GDB setting as a string.\n"
"Usage: $_gdb_setting_str (setting)\n"
"\n"
"auto-boolean values are \"off\", \"on\", \"auto\".\n"
"boolean values are \"off\", \"on\".\n"
"Some integer settings accept an unlimited value, returned\n"
"as \"unlimited\"."
msgstr ""

#: cli/cli-cmds.c:2259
msgid ""
"$_gdb_setting - returns the value of a GDB setting.\n"
"Usage: $_gdb_setting (setting)\n"
"auto-boolean values are \"off\", \"on\", \"auto\".\n"
"boolean values are \"off\", \"on\".\n"
"Some integer settings accept an unlimited value, returned\n"
"as 0 or -1 depending on the setting."
msgstr ""

#: cli/cli-cmds.c:2268
msgid ""
"$_gdb_maint_setting_str - returns the value of a GDB maintenance setting as "
"a string.\n"
"Usage: $_gdb_maint_setting_str (setting)\n"
"\n"
"auto-boolean values are \"off\", \"on\", \"auto\".\n"
"boolean values are \"off\", \"on\".\n"
"Some integer settings accept an unlimited value, returned\n"
"as \"unlimited\"."
msgstr ""

#: cli/cli-cmds.c:2278
msgid ""
"$_gdb_maint_setting - returns the value of a GDB maintenance setting.\n"
"Usage: $_gdb_maint_setting (setting)\n"
"auto-boolean values are \"off\", \"on\", \"auto\".\n"
"boolean values are \"off\", \"on\".\n"
"Some integer settings accept an unlimited value, returned\n"
"as 0 or -1 depending on the setting."
msgstr ""

#: cli/cli-cmds.c:2287
msgid ""
"Show the history of commands you typed.\n"
"You can supply a command number to start with, or a `+' to start after\n"
"the previous command number shown."
msgstr ""

#: cli/cli-cmds.c:2294
msgid "Show what version of GDB this is."
msgstr ""

#: cli/cli-cmds.c:2297
msgid "Show how GDB was configured at build time."
msgstr ""

#: cli/cli-cmds.c:2299
msgid "Set debugging of remote protocol."
msgstr ""

#: cli/cli-cmds.c:2300
msgid "Show debugging of remote protocol."
msgstr ""

#: cli/cli-cmds.c:2301
msgid ""
"When enabled, each packet sent or received with the remote target\n"
"is displayed."
msgstr ""

#: cli/cli-cmds.c:2309
msgid "Set timeout limit to wait for target to respond."
msgstr ""

#: cli/cli-cmds.c:2310
msgid "Show timeout limit to wait for target to respond."
msgstr ""

#: cli/cli-cmds.c:2311
msgid ""
"This value is used to set the time limit for gdb to wait for a response\n"
"from the target."
msgstr ""

#: cli/cli-cmds.c:2319
msgid "Generic command for setting gdb debugging flags."
msgstr ""

#: cli/cli-cmds.c:2323
msgid "Generic command for showing gdb debugging flags."
msgstr ""

#: cli/cli-cmds.c:2326
msgid ""
"Execute the rest of the line as a shell command.\n"
"With no arguments, run an inferior shell."
msgstr ""

#: cli/cli-cmds.c:2333
msgid ""
"Edit specified file or function.\n"
"With no argument, edits file containing most recent line listed.\n"
"Editing targets can be specified in these ways:\n"
"  FILE:LINENUM, to edit at that line in that file,\n"
"  FUNCTION, to edit at the beginning of that function,\n"
"  FILE:FUNCTION, to distinguish among like-named static functions.\n"
"  *ADDRESS, to edit at the line containing that address.\n"
"Uses EDITOR environment variable contents as editor (or ex as default)."
msgstr ""

#: cli/cli-cmds.c:2345
msgid ""
"Send the output of a gdb command to a shell command.\n"
"Usage: | [COMMAND] | SHELL_COMMAND\n"
"Usage: | -d DELIM COMMAND DELIM SHELL_COMMAND\n"
"Usage: pipe [COMMAND] | SHELL_COMMAND\n"
"Usage: pipe -d DELIM COMMAND DELIM SHELL_COMMAND\n"
"\n"
"Executes COMMAND and sends its output to SHELL_COMMAND.\n"
"\n"
"The -d option indicates to use the string DELIM to separate COMMAND\n"
"from SHELL_COMMAND, in alternative to |.  This is useful in\n"
"case COMMAND contains a | character.\n"
"\n"
"With no COMMAND, repeat the last executed command\n"
"and send its output to SHELL_COMMAND."
msgstr ""

#: cli/cli-cmds.c:2363
msgid ""
"List specified function or line.\n"
"With no argument, lists ten more lines after or around previous listing.\n"
"\"list -\" lists the ten lines before a previous ten-line listing.\n"
"One argument specifies a line, and ten lines are listed around that line.\n"
"Two arguments with comma between specify starting and ending lines to list.\n"
"Lines can be specified in these ways:\n"
"  LINENUM, to list around that line in current file,\n"
"  FILE:LINENUM, to list around that line in that file,\n"
"  FUNCTION, to list around beginning of that function,\n"
"  FILE:FUNCTION, to distinguish among like-named static functions.\n"
"  *ADDRESS, to list around the line containing that address.\n"
"With two args, if one is empty, it stands for ten lines away from\n"
"the other arg.\n"
"\n"
"By default, when a single location is given, display ten lines.\n"
"This can be changed using \"set listsize\", and the current value\n"
"can be shown using \"show listsize\"."
msgstr ""

#: cli/cli-cmds.c:2387
msgid ""
"Disassemble a specified section of memory.\n"
"Default is the function surrounding the pc of the selected frame.\n"
"\n"
"With a /m modifier, source lines are included (if available).\n"
"This view is \"source centric\": the output is in source line order,\n"
"regardless of any optimization that is present.  Only the main source file\n"
"is displayed, not those of, e.g., any inlined functions.\n"
"This modifier hasn't proved useful in practice and is deprecated\n"
"in favor of /s.\n"
"\n"
"With a /s modifier, source lines are included (if available).\n"
"This differs from /m in two important respects:\n"
"- the output is still in pc address order, and\n"
"- file names and contents for all relevant source files are displayed.\n"
"\n"
"With a /r modifier, raw instructions in hex are included.\n"
"\n"
"With a single argument, the function surrounding that address is dumped.\n"
"Two arguments (separated by a comma) are taken as a range of memory to "
"dump,\n"
"  in the form of \"start,end\", or \"start,+length\".\n"
"\n"
"Note that the address is interpreted as an expression, not as a location\n"
"like in the \"break\" command.\n"
"So, for example, if you want to disassemble function bar in file foo.c\n"
"you must type \"disassemble 'foo.c'::bar\" and not \"disassemble foo.c:bar\"."
msgstr ""

#: cli/cli-cmds.c:2415
msgid "Run the ``make'' program using the rest of the line as arguments."
msgstr ""

#: cli/cli-cmds.c:2418
msgid ""
"Show definitions of non-python/scheme user defined commands.\n"
"Argument is the name of the user defined command.\n"
"With no argument, show definitions of all user defined commands."
msgstr ""

#: cli/cli-cmds.c:2422
msgid ""
"Search for commands matching a REGEXP.\n"
"Usage: apropos [-v] REGEXP\n"
"Flag -v indicates to produce a verbose output, showing full documentation\n"
"of the matching commands."
msgstr ""

#: cli/cli-cmds.c:2429
msgid "Set the max call depth for non-python/scheme user-defined commands."
msgstr ""

#: cli/cli-cmds.c:2430
msgid "Show the max call depth for non-python/scheme user-defined commands."
msgstr ""

#: cli/cli-cmds.c:2436
msgid "Set tracing of GDB CLI commands."
msgstr ""

#: cli/cli-cmds.c:2437
msgid "Show state of GDB CLI command tracing."
msgstr ""

#: cli/cli-cmds.c:2438
msgid "When 'on', each command is displayed as it is executed."
msgstr ""

#: cli/cli-cmds.c:2444
msgid ""
"Define a new command that is an alias of an existing command.\n"
"Usage: alias [-a] [--] ALIAS = COMMAND\n"
"ALIAS is the name of the alias command to create.\n"
"COMMAND is the command being aliased to.\n"
"If \"-a\" is specified, the command is an abbreviation,\n"
"and will not appear in help command list output.\n"
"\n"
"Examples:\n"
"Make \"spe\" an alias of \"set print elements\":\n"
"  alias spe = set print elements\n"
"Make \"elms\" an alias of \"elements\" in the \"set print\" command:\n"
"  alias -a set print elms = set print elements"
msgstr ""

#: cli/cli-cmds.c:2458
#, possible-c-format
msgid ""
"Read commands from a file named FILE.\n"
"\n"
"Usage: source [-s] [-v] FILE\n"
"-s: search for the script in the source search path,\n"
"    even if FILE contains directories.\n"
"-v: each command in FILE is echoed as it is executed.\n"
"\n"
"Note that the file \"%s\" is read automatically in this way\n"
"when GDB is started."
msgstr ""

#: cli/cli-decode.c:1559
#, possible-c-format
msgid "Undefined %scommand: \"%s\".  Try \"help%s%.*s\"."
msgstr ""

#: cli/cli-decode.c:1593
#, possible-c-format
msgid "Lack of needed %scommand"
msgstr ""

#: cli/cli-decode.c:1658
#, possible-c-format
msgid "Ambiguous %scommand \"%s\": %s."
msgstr ""

#: cli/cli-decode.c:1665
msgid "Argument must be preceded by space."
msgstr ""

#: cli/cli-decode.c:1955
msgid "Invalid command"
msgstr ""

#: cli/cli-style.c:177
msgid "The "
msgstr ""

#: cli/cli-style.c:178
#, possible-c-format
msgid "\"%s\" style"
msgstr ""

#: cli/cli-style.c:179
#, possible-c-format
msgid " %s is: %s\n"
msgstr ""

#: cli/cli-style.c:189
msgid "foreground color"
msgstr ""

#: cli/cli-style.c:199
msgid "background color"
msgstr ""

#: cli/cli-style.c:209
msgid "display intensity"
msgstr ""

#: cli/cli-style.c:235
msgid "Set the foreground color for this property."
msgstr ""

#: cli/cli-style.c:236
msgid "Show the foreground color for this property."
msgstr ""

#: cli/cli-style.c:243
msgid "Set the background color for this property."
msgstr ""

#: cli/cli-style.c:244
msgid "Show the background color for this property."
msgstr ""

#: cli/cli-style.c:252
msgid "Set the display intensity for this property."
msgstr ""

#: cli/cli-style.c:253
msgid "Show the display intensity for this property."
msgstr ""

#: cli/cli-style.c:266
msgid "\"set style\" must be followed by an appropriate subcommand.\n"
msgstr ""

#: cli/cli-style.c:289
msgid "CLI output styling is enabled.\n"
msgstr ""

#: cli/cli-style.c:291
msgid "CLI output styling is disabled.\n"
msgstr ""

#: cli/cli-style.c:299
msgid "Source code styling is enabled.\n"
msgstr ""

#: cli/cli-style.c:301
msgid "Source code styling is disabled.\n"
msgstr ""

#: cli/cli-style.c:319 cli/cli-style.c:323
msgid ""
"Style-specific settings.\n"
"Configure various style-related variables, such as colors"
msgstr ""

#: cli/cli-style.c:328
msgid "Set whether CLI styling is enabled."
msgstr ""

#: cli/cli-style.c:329
msgid "Show whether CLI is enabled."
msgstr ""

#: cli/cli-style.c:330
msgid "If enabled, output to the terminal is styled."
msgstr ""

#: cli/cli-style.c:335
msgid "Set whether source code styling is enabled."
msgstr ""

#: cli/cli-style.c:336
msgid "Show whether source code styling is enabled."
msgstr ""

#: cli/cli-style.c:337
msgid ""
"If enabled, source code is styled.\n"
"Note that source styling only works if styling in general is enabled,\n"
"see \"show style enabled\".Source highlighting is disabled in this "
"installation of gdb, because\n"
"it was not linked against GNU Source Highlight."
msgstr ""

#: cli/cli-style.c:370
msgid ""
"Filename display styling.\n"
"Configure filename colors and display intensity."
msgstr ""

#: cli/cli-style.c:375
msgid ""
"Function name display styling.\n"
"Configure function name colors and display intensity"
msgstr ""

#: cli/cli-style.c:380
msgid ""
"Variable name display styling.\n"
"Configure variable name colors and display intensity"
msgstr ""

#: cli/cli-style.c:385
msgid ""
"Address display styling.\n"
"Configure address colors and display intensity"
msgstr ""

#: cli/cli-style.c:390
msgid ""
"Title display styling.\n"
"Configure title colors and display intensity\n"
"Some commands (such as \"apropos -v REGEXP\") use the title style to "
"improve\n"
"readability."
msgstr ""

#: cli/cli-style.c:397
msgid ""
"Highlight display styling.\n"
"Configure highlight colors and display intensity\n"
"Some commands use the highlight style to draw the attention to a part\n"
"of their output."
msgstr ""

#: cli/cli-style.c:404
msgid ""
"Metadata display styling.\n"
"Configure metadata colors and display intensity\n"
"The \"metadata\" style is used when GDB displays information about\n"
"your data, for example \"<unavailable>\""
msgstr ""

#: cli/cli-style.c:411
msgid ""
"TUI border display styling.\n"
"Configure TUI border colors\n"
"The \"tui-border\" style is used when GDB displays the border of a\n"
"TUI window that does not have the focus."
msgstr ""

#: cli/cli-style.c:418
msgid ""
"TUI active border display styling.\n"
"Configure TUI active border colors\n"
"The \"tui-active-border\" style is used when GDB displays the border of a\n"
"TUI window that does have the focus."
msgstr ""

#: cli/cli-logging.c:33
#, possible-c-format
msgid "The current logfile is \"%ps\".\n"
msgstr ""

#: cli/cli-logging.c:43
#, possible-c-format
msgid ""
"Currently logging to %s.  Turn the logging off and on to make the new "
"setting effective."
msgstr ""

#: cli/cli-logging.c:59
#, possible-c-format
msgid "Whether logging overwrites or appends to the log file is %s.\n"
msgstr ""

#: cli/cli-logging.c:79
#, possible-c-format
msgid "The logging output mode is %s.\n"
msgstr ""

#: cli/cli-logging.c:106
msgid "set logging"
msgstr ""

#: cli/cli-logging.c:171
msgid ""
"\"set logging\" lets you log output to a file.\n"
"Usage: set logging on [FILENAME]\n"
"       set logging off\n"
"       set logging file FILENAME\n"
"       set logging overwrite [on|off]\n"
"       set logging redirect [on|off]\n"
msgstr ""

#: cli/cli-logging.c:183
#, possible-c-format
msgid "Currently logging to \"%s\".\n"
msgstr ""

#: cli/cli-logging.c:186
#, possible-c-format
msgid "Future logs will be written to %s.\n"
msgstr ""

#: cli/cli-logging.c:190
msgid "Logs will overwrite the log file.\n"
msgstr ""

#: cli/cli-logging.c:192
msgid "Logs will be appended to the log file.\n"
msgstr ""

#: cli/cli-logging.c:195
msgid "Output will be sent only to the log file.\n"
msgstr ""

#: cli/cli-logging.c:197
msgid "Output will be logged and displayed.\n"
msgstr ""

#: cli/cli-logging.c:200
msgid "Debug output will be sent only to the log file.\n"
msgstr ""

#: cli/cli-logging.c:202
msgid "Debug output will be logged and displayed.\n"
msgstr ""

#: cli/cli-logging.c:211
msgid "Set logging options."
msgstr ""

#: cli/cli-logging.c:214
msgid "Show logging options."
msgstr ""

#: cli/cli-logging.c:216
msgid "Set whether logging overwrites or appends to the log file."
msgstr ""

#: cli/cli-logging.c:217
msgid "Show whether logging overwrites or appends to the log file."
msgstr ""

#: cli/cli-logging.c:218
msgid "If set, logging overrides the log file."
msgstr ""

#: cli/cli-logging.c:223
msgid "Set the logging output mode."
msgstr ""

#: cli/cli-logging.c:224
msgid "Show the logging output mode."
msgstr ""

#: cli/cli-logging.c:225
msgid ""
"If redirect is off, output will go to both the screen and the log file.\n"
"If redirect is on, output will go only to the log file."
msgstr ""

#: cli/cli-logging.c:232
msgid "Set the logging debug output mode."
msgstr ""

#: cli/cli-logging.c:233
msgid "Show the logging debug output mode."
msgstr ""

#: cli/cli-logging.c:234
msgid ""
"If debug redirect is off, debug will go to both the screen and the log "
"file.\n"
"If debug redirect is on, debug will go only to the log file."
msgstr ""

#: cli/cli-logging.c:240
msgid "Set the current logfile."
msgstr ""

#: cli/cli-logging.c:241
msgid "Show the current logfile."
msgstr ""

#: cli/cli-logging.c:242
msgid "The logfile is used when directing GDB's output."
msgstr ""

#: cli/cli-logging.c:248
msgid "Enable logging."
msgstr ""

#: cli/cli-logging.c:250
msgid "Disable logging."
msgstr ""

#: cli/cli-setshow.c:74
msgid "\"on\", \"off\" or \"auto\" expected."
msgstr ""

#: cli/cli-setshow.c:176
#, possible-c-format
msgid "Junk after \"%.*s\": %s"
msgstr ""

#: cli/cli-setshow.c:197 cli/cli-setshow.c:230 cli/cli-setshow.c:460
msgid "integer to set it to, or \"unlimited\"."
msgstr ""

#: cli/cli-setshow.c:199 cli/cli-setshow.c:462
msgid "integer to set it to."
msgstr ""

#: cli/cli-setshow.c:217 cli/cli-setshow.c:240 cli/cli-setshow.c:478
#, possible-c-format
msgid "integer %s out of range"
msgstr ""

#: cli/cli-setshow.c:242
msgid "only -1 is allowed to set as unlimited"
msgstr ""

#: cli/cli-setshow.c:264
#, possible-c-format
msgid "Requires an argument. Valid arguments are %s."
msgstr ""

#: cli/cli-setshow.c:290
#, possible-c-format
msgid "Undefined item: \"%.*s\"."
msgstr ""

#: cli/cli-setshow.c:293
#, possible-c-format
msgid "Ambiguous item \"%.*s\"."
msgstr ""

#: cli/cli-setshow.c:379
msgid "filename to set it to."
msgstr ""

#: cli/cli-setshow.c:418
msgid "\"on\" or \"off\" expected."
msgstr ""

#: cli/cli-setshow.c:496
#, possible-c-format
msgid "Junk after item \"%.*s\": %s"
msgstr ""

#: cli/cli-setshow.c:518
msgid "gdb internal error: bad var_type in do_setshow_command"
msgstr ""

#: cli/cli-dump.c:66
msgid "Missing filename."
msgstr ""

#: cli/cli-dump.c:89 cli/cli-dump.c:107 nat/linux-btrace.c:568
#, possible-c-format
msgid "Failed to open %s: %s."
msgstr ""

#: cli/cli-dump.c:93
#, possible-c-format
msgid "'%s' is not a recognized file format."
msgstr ""

#: cli/cli-dump.c:110
#, possible-c-format
msgid "bfd_openw_or_error: %s."
msgstr ""

#. Append to existing file.
#. FIXME -- doesn't work...
#: cli/cli-dump.c:114
msgid "bfd_openw does not work with append."
msgstr ""

#: cli/cli-dump.c:117
#, possible-c-format
msgid "bfd_openw_or_error: unknown mode %s."
msgstr ""

#: cli/cli-dump.c:134
msgid ""
"\"dump\" must be followed by a subcommand.\n"
"\n"
msgstr ""

#: cli/cli-dump.c:141
msgid ""
"\"append\" must be followed by a subcommand.\n"
"\n"
msgstr ""

#: cli/cli-dump.c:172
#, possible-c-format
msgid "writing dump file '%s' (%s)"
msgstr ""

#: cli/cli-dump.c:189
msgid "Missing start address."
msgstr ""

#: cli/cli-dump.c:194
msgid "Missing stop address."
msgstr ""

#: cli/cli-dump.c:200
msgid "Invalid memory address range (start >= end)."
msgstr ""

#: cli/cli-dump.c:231
#, possible-c-format
msgid "No value to %s."
msgstr ""

#: cli/cli-dump.c:234
msgid "Invalid expression."
msgstr ""

#: cli/cli-dump.c:251
msgid "value is not an lval: address assumed to be zero"
msgstr ""

#. No, no useable data in this section.
#: cli/cli-dump.c:420
#, possible-c-format
msgid "skipping section %s...\n"
msgstr ""

#: cli/cli-dump.c:438
#, possible-c-format
msgid "Failed to read bfd file %s: '%s'."
msgstr ""

#: cli/cli-dump.c:461 cli/cli-dump.c:513
#, possible-c-format
msgid "restore: memory write failed (%s)."
msgstr ""

#: cli/cli-dump.c:471
#, possible-c-format
msgid "Failed to open %s: %s"
msgstr ""

#: cli/cli-dump.c:484
#, possible-c-format
msgid "Start address is greater than length of binary file %s."
msgstr ""

#: cli/cli-dump.c:557
msgid "Start must be less than end."
msgstr ""

#: cli/cli-dump.c:585
msgid "\"dump srec\" must be followed by a subcommand.\n"
msgstr ""

#: cli/cli-dump.c:592
msgid "\"dump ihex\" must be followed by a subcommand.\n"
msgstr ""

#: cli/cli-dump.c:599
msgid "\"dump verilog\" must be followed by a subcommand.\n"
msgstr ""

#: cli/cli-dump.c:606
msgid "\"dump tekhex\" must be followed by a subcommand.\n"
msgstr ""

#: cli/cli-dump.c:613
msgid "\"dump binary\" must be followed by a subcommand.\n"
msgstr ""

#: cli/cli-dump.c:620
msgid "\"append binary\" must be followed by a subcommand.\n"
msgstr ""

#: cli/cli-dump.c:631
msgid "Dump target code/data to a local file."
msgstr ""

#: cli/cli-dump.c:636
msgid "Append target code/data to a local file."
msgstr ""

#: cli/cli-dump.c:652
msgid "Write target code/data to an srec file."
msgstr ""

#: cli/cli-dump.c:658
msgid "Write target code/data to an intel hex file."
msgstr ""

#: cli/cli-dump.c:664
msgid "Write target code/data to a verilog hex file."
msgstr ""

#: cli/cli-dump.c:670
msgid "Write target code/data to a tekhex file."
msgstr ""

#: cli/cli-dump.c:676
msgid "Write target code/data to a raw binary file."
msgstr ""

#: cli/cli-dump.c:682
msgid "Append target code/data to a raw binary file."
msgstr ""

#: cli/cli-dump.c:687
msgid ""
"Write contents of memory to an srec file.\n"
"Arguments are FILE START STOP.  Writes the contents of memory\n"
"within the range [START .. STOP) to the specified FILE in srec format."
msgstr ""

#: cli/cli-dump.c:693
msgid ""
"Write the value of an expression to an srec file.\n"
"Arguments are FILE EXPRESSION.  Writes the value of EXPRESSION\n"
"to the specified FILE in srec format."
msgstr ""

#: cli/cli-dump.c:699
msgid ""
"Write contents of memory to an ihex file.\n"
"Arguments are FILE START STOP.  Writes the contents of memory within\n"
"the range [START .. STOP) to the specified FILE in intel hex format."
msgstr ""

#: cli/cli-dump.c:705
msgid ""
"Write the value of an expression to an ihex file.\n"
"Arguments are FILE EXPRESSION.  Writes the value of EXPRESSION\n"
"to the specified FILE in intel hex format."
msgstr ""

#: cli/cli-dump.c:711
msgid ""
"Write contents of memory to a verilog hex file.\n"
"Arguments are FILE START STOP.  Writes the contents of memory within\n"
"the range [START .. STOP) to the specified FILE in verilog hex format."
msgstr ""

#: cli/cli-dump.c:717
msgid ""
"Write the value of an expression to a verilog hex file.\n"
"Arguments are FILE EXPRESSION.  Writes the value of EXPRESSION\n"
"to the specified FILE in verilog hex format."
msgstr ""

#: cli/cli-dump.c:723
msgid ""
"Write contents of memory to a tekhex file.\n"
"Arguments are FILE START STOP.  Writes the contents of memory\n"
"within the range [START .. STOP) to the specified FILE in tekhex format."
msgstr ""

#: cli/cli-dump.c:729
msgid ""
"Write the value of an expression to a tekhex file.\n"
"Arguments are FILE EXPRESSION.  Writes the value of EXPRESSION\n"
"to the specified FILE in tekhex format."
msgstr ""

#: cli/cli-dump.c:735
msgid ""
"Write contents of memory to a raw binary file.\n"
"Arguments are FILE START STOP.  Writes the contents of memory\n"
"within the range [START .. STOP) to the specified FILE in binary format."
msgstr ""

#: cli/cli-dump.c:741
msgid ""
"Write the value of an expression to a raw binary file.\n"
"Arguments are FILE EXPRESSION.  Writes the value of EXPRESSION\n"
"to the specified FILE in raw target ordered bytes."
msgstr ""

#: cli/cli-dump.c:747
msgid ""
"Append contents of memory to a raw binary file.\n"
"Arguments are FILE START STOP.  Writes the contents of memory within the\n"
"range [START .. STOP) to the specified FILE in raw target ordered bytes."
msgstr ""

#: cli/cli-dump.c:753
msgid ""
"Append the value of an expression to a raw binary file.\n"
"Arguments are FILE EXPRESSION.  Writes the value of EXPRESSION\n"
"to the specified FILE in raw target ordered bytes."
msgstr ""

#: cli/cli-dump.c:759
msgid ""
"Restore the contents of FILE to target memory.\n"
"Arguments are FILE OFFSET START END where all except FILE are optional.\n"
"OFFSET will be added to the base address of the file (default zero).\n"
"If START and END are given, only the file contents within that range\n"
"(file relative) will be restored to target memory."
msgstr ""

#: cli/cli-script.c:157
msgid "if command requires an argument."
msgstr ""

#: cli/cli-script.c:159
msgid "while command requires an argument."
msgstr ""

#: cli/cli-script.c:161
msgid "define command requires an argument."
msgstr ""

#: cli/cli-script.c:182
msgid "Error reading in canned sequence of commands."
msgstr ""

#: cli/cli-script.c:409
msgid "Error executing canned sequence of commands."
msgstr ""

#: cli/cli-script.c:465
msgid "Max user call depth exceeded -- command aborted."
msgstr ""

#: cli/cli-script.c:690
msgid "Invalid control type in canned commands structure."
msgstr ""

#: cli/cli-script.c:878
#, possible-c-format
msgid "Missing argument %ld in user function."
msgstr ""

#: cli/cli-script.c:906
msgid "Control nesting too deep!"
msgstr ""

#: cli/cli-script.c:1089
msgid "Recursed on a simple control type."
msgstr ""

#: cli/cli-script.c:1315
msgid "name of command to define"
msgstr ""

#: cli/cli-script.c:1336
#, possible-c-format
msgid "\"%s\" is not a prefix command."
msgstr ""

#: cli/cli-script.c:1346
#, possible-c-format
msgid "Junk in argument list: \"%s\""
msgstr ""

#: cli/cli-script.c:1405
#, possible-c-format
msgid ""
"Keeping subcommands of prefix command \"%s\".\n"
"Redefine command \"%s\"? "
msgstr ""

#: cli/cli-script.c:1408
#, possible-c-format
msgid "Redefine command \"%s\"? "
msgstr ""

#: cli/cli-script.c:1411
#, possible-c-format
msgid "Really redefine built-in command \"%s\"? "
msgstr ""

#: cli/cli-script.c:1413
#, possible-c-format
msgid "Command \"%s\" not redefined."
msgstr ""

#: cli/cli-script.c:1440
#, possible-c-format
msgid "Your new `%s' command does not hook any existing command."
msgstr ""

#: cli/cli-script.c:1443
msgid "Proceed? "
msgstr ""

#. Should never come here as hookc would be 0.
#: cli/cli-script.c:1499 gdbsupport/common-exceptions.c:93
#: gdbsupport/common-exceptions.c:109 gdbsupport/common-exceptions.c:125
#: hppa-tdep.c:3127 hppa-tdep.c:3140 infcall.c:983 infcmd.c:1576 language.c:464
#: mi/mi-out.c:227 mi/mi-out.c:247 mips-tdep.c:305 mips-tdep.c:509
#: mips-tdep.c:2235 mips-tdep.c:5762 mips-tdep.c:6927 mn10300-tdep.c:127
#: reggroups.c:274 remote.c:2116 remote.c:8663 remote.c:9949 utils.c:380
#: utils.c:408
msgid "bad switch"
msgstr ""

#: cli/cli-script.c:1524 cli/cli-script.c:1575
#, possible-c-format
msgid "Command \"%s\" is built-in."
msgstr ""

#: cli/cli-script.c:1610
msgid "called with NULL file pointer!"
msgstr ""

#: cli/cli-script.c:1629
#, possible-c-format
msgid ""
"%s:%d: Error in sourced command file:\n"
"%s"
msgstr ""

#. "document", "define" and "define-prefix" use command_completer,
#. as this helps the user to either type the command name and/or
#. its prefixes.
#: cli/cli-script.c:1678
msgid ""
"Document a user-defined command.\n"
"Give command name as argument.  Give documentation on following lines.\n"
"End with a line of just \"end\"."
msgstr ""

#: cli/cli-script.c:1683
msgid ""
"Define a new command name.  Command name is argument.\n"
"Definition appears on following lines, one command per line.\n"
"End with a line of just \"end\".\n"
"Use the \"document\" command to give documentation for the new command.\n"
"Commands defined in this way may accept an unlimited number of arguments\n"
"accessed via $arg0 .. $argN.  $argc tells how many arguments have\n"
"been passed."
msgstr ""

#: cli/cli-script.c:1693
msgid ""
"Define or mark a command as a user-defined prefix command.\n"
"User defined prefix commands can be used as prefix commands for\n"
"other user defined commands.\n"
"If the command already exists, it is changed to a prefix command."
msgstr ""

#: cli/cli-script.c:1700
msgid ""
"Execute nested commands WHILE the conditional expression is non zero.\n"
"The conditional expression must follow the word `while' and must in turn be\n"
"followed by a new line.  The nested commands must be entered one per line,\n"
"and should be terminated by the word `end'."
msgstr ""

#: cli/cli-script.c:1706
msgid ""
"Execute nested commands once IF the conditional expression is non zero.\n"
"The conditional expression must follow the word `if' and must in turn be\n"
"followed by a new line.  The nested commands must be entered one per line,\n"
"and should be terminated by the word 'else' or `end'.  If an else clause\n"
"is used, the same rules apply to its nested commands as to the first ones."
msgstr ""

#: coff-pe-read.c:177
#, possible-c-format
msgid "Unknown section type for \"%s\" for entry \"%s\" in dll \"%s\"\n"
msgstr ""

#: coff-pe-read.c:189
#, possible-c-format
msgid "Adding exported symbol \"%s\" in dll \"%s\"\n"
msgstr ""

#: coff-pe-read.c:235
#, possible-c-format
msgid ""
"Unable to find function \"%s\" in dll \"%s\", forward of \"%s\" in dll \"%s"
"\"\n"
msgstr ""

#: coff-pe-read.c:243
#, possible-c-format
msgid ""
"Adding forwarded exported symbol \"%s\" in dll \"%s\", pointing to \"%s\"\n"
msgstr ""

#: coff-pe-read.c:431
#, possible-c-format
msgid "Export RVA for dll \"%s\" is in section \"%s\"\n"
msgstr ""

#: coff-pe-read.c:436
#, possible-c-format
msgid "Wrong value of export RVA for dll \"%s\": 0x%lx instead of 0x%lx\n"
msgstr ""

#: coff-pe-read.c:529
#, possible-c-format
msgid "DLL \"%s\" has %ld export entries, base=%ld\n"
msgstr ""

#: coff-pe-read.c:602
#, possible-c-format
msgid "Export name \"%s\" ord. %lu, RVA 0x%lx in dll \"%s\" not handled\n"
msgstr ""

#: coff-pe-read.c:609
#, possible-c-format
msgid "Finished reading \"%s\", exports %ld, forwards %ld, total %ld/%ld.\n"
msgstr ""

#: coff-pe-read.c:683
#, possible-c-format
msgid "Coff PE read debugging is %s.\n"
msgstr ""

#: coff-pe-read.c:693
msgid "Set coff PE read debugging."
msgstr ""

#: coff-pe-read.c:694
msgid "Show coff PE read debugging."
msgstr ""

#: coff-pe-read.c:695
msgid ""
"When set, debugging messages for coff reading of exported symbols are "
"displayed."
msgstr ""

#: coffread.c:616
#, possible-c-format
msgid "\"%s\": error reading line numbers."
msgstr ""

#: coffread.c:625
#, possible-c-format
msgid "\"%s\": can't get string table"
msgstr ""

#: coffread.c:685
#, possible-c-format
msgid ""
"The debugging information in `%s' is corrupted.\n"
"The file has a `.stabs' section, but no `.stabstr' section."
msgstr ""

#: coffread.c:875
#, possible-c-format
msgid "Bad n_sclass for symbol %s"
msgstr ""

#: coffread.c:1044
#, possible-c-format
msgid "`.bf' symbol %d has no aux entry"
msgstr ""

#: coffread.c:1062
msgid "Bad coff function information."
msgstr ""

#. We attempted to pop an empty context stack.
#: coffread.c:1070
#, possible-c-format
msgid ""
"`.ef' symbol without matching `.bf' symbol ignored starting at symnum %d"
msgstr ""

#: coffread.c:1081
#, possible-c-format
msgid "Unmatched .ef symbol(s) ignored starting at symnum %d"
msgstr ""

#: coffread.c:1089
#, possible-c-format
msgid "`.ef' symbol %d has no aux entry"
msgstr ""

#. We attempted to pop an empty context stack.
#: coffread.c:1134
#, possible-c-format
msgid ""
"`.eb' symbol without matching `.bb' symbol ignored starting at symnum %d"
msgstr ""

#: coffread.c:1143 xcoffread.c:197
#, possible-c-format
msgid "Mismatched .eb symbol ignored starting at symnum %d"
msgstr ""

#: coffread.c:1209 coffread.c:1216 coffread.c:1226
#, possible-c-format
msgid "%s: error reading symbols"
msgstr ""

#: coffread.c:1240
#, c-format
msgid "thumb symbol %s, class 0x%x\n"
msgstr ""

#: coffread.c:1349
msgid "coff file name too long"
msgstr ""

#: coffread.c:1417
#, possible-c-format
msgid "Line number pointer %ld lower than start of line numbers"
msgstr ""

#: coffread.c:1812
#, possible-c-format
msgid "Symbol table entry for %s has bad tagndx value"
msgstr ""

#: coffread.c:1969
#, possible-c-format
msgid "Unexpected type for symbol %s"
msgstr ""

#: compile/compile.c:176
msgid "Unexpected type id from GCC, check you use recent enough GCC."
msgstr ""

#: compile/compile.c:225 utils.c:622
#, possible-c-format
msgid "%s"
msgstr ""

#: compile/compile.c:234
#, possible-c-format
msgid "Compile debugging is %s.\n"
msgstr ""

#: compile/compile.c:255
msgid "Suppress automatic 'void _gdb_expr () { CODE }' wrapping."
msgstr ""

#: compile/compile.c:295
msgid "You must provide a filename for this command."
msgstr ""

#: compile/compile.c:428
#, possible-c-format
msgid "Could not remove temporary directory %s"
msgstr ""

#: compile/compile.c:450
msgid "Could not make temporary directory"
msgstr ""

#: compile/compile.c:531
#, possible-c-format
msgid "Compile command command-line arguments are \"%s\".\n"
msgstr ""

#: compile/compile.c:560
#, possible-c-format
msgid "Compile command GCC driver filename is \"%s\".\n"
msgstr ""

#: compile/compile.c:687
msgid "The program must be running for the compile command to work."
msgstr ""

#: compile/compile.c:695
#, possible-c-format
msgid "No compiler support for language %s."
msgstr ""

#: compile/compile.c:726
msgid "Neither a simple expression, or a multi-line specified."
msgstr ""

#: compile/compile.c:739
msgid ""
"Command 'set compile-gcc' requires GCC version 6 or higher (libcc1 interface "
"version 1 or higher)"
msgstr ""

#: compile/compile.c:782
msgid "Could not open source file for writing"
msgstr ""

#: compile/compile.c:787
msgid "Could not write to source file"
msgstr ""

#: compile/compile.c:798
msgid "Compilation failed."
msgstr ""

#: compile/compile.c:867
#, possible-c-format
msgid "Invalid register name \"%s\"."
msgstr ""

#: compile/compile.c:874
#, possible-c-format
msgid "Cannot find gdbarch register \"%s\"."
msgstr ""

#: compile/compile.c:966
msgid "Command to compile source code and inject it into the inferior."
msgstr ""

#: compile/compile.c:974
msgid ""
"Compile, inject, and execute code.\n"
"\n"
"Usage: compile code [OPTION]... [CODE]\n"
"\n"
"Options:\n"
"%OPTIONS%\n"
"\n"
"The source code may be specified as a simple one line expression, e.g.:\n"
"\n"
"    compile code printf(\"Hello world\\n\");\n"
"\n"
"Alternatively, you can type a multiline expression by invoking\n"
"this command with no argument.  GDB will then prompt for the\n"
"expression interactively; type a line containing \"end\" to\n"
"indicate the end of the expression."
msgstr ""

#: compile/compile.c:998
msgid ""
"Evaluate a file containing source code.\n"
"\n"
"Usage: compile file [OPTION].. [FILENAME]\n"
"\n"
"Options:\n"
"%OPTIONS%"
msgstr ""

#: compile/compile.c:1015
msgid ""
"Evaluate EXPR by using the compiler and print result.\n"
"\n"
"Usage: compile print [[OPTION]... --] [/FMT] [EXPR]\n"
"\n"
"Options:\n"
"%OPTIONS%\n"
"\n"
"Note: because this command accepts arbitrary expressions, if you\n"
"specify any command option, you must use a double dash (\"--\")\n"
"to mark the end of option processing.  E.g.: \"compile print -o -- myobj\".\n"
"\n"
"The expression may be specified on the same line as the command, e.g.:\n"
"\n"
"    compile print i\n"
"\n"
"Alternatively, you can type a multiline expression by invoking\n"
"this command with no argument.  GDB will then prompt for the\n"
"expression interactively; type a line containing \"end\" to\n"
"indicate the end of the expression.\n"
"\n"
"EXPR may be preceded with /FMT, where FMT is a format letter\n"
"but no count or size letter (see \"x\" command)."
msgstr ""

#: compile/compile.c:1045
msgid "Set compile command debugging."
msgstr ""

#: compile/compile.c:1046
msgid "Show compile command debugging."
msgstr ""

#: compile/compile.c:1047
msgid "When on, compile command debugging is enabled."
msgstr ""

#: compile/compile.c:1054
msgid "Set compile command GCC command-line arguments."
msgstr ""

#: compile/compile.c:1055
msgid "Show compile command GCC command-line arguments."
msgstr ""

#: compile/compile.c:1056
msgid ""
"Use options like -I (include file directory) or ABI settings.\n"
"String quoting is parsed like in shell, for example:\n"
"  -mno-align-double \"-I/dir with a space/include\""
msgstr ""

#: compile/compile.c:1082
msgid "Set compile command GCC driver filename."
msgstr ""

#: compile/compile.c:1084
msgid "Show compile command GCC driver filename."
msgstr ""

#: compile/compile.c:1086
msgid ""
"It should be absolute filename of the gcc executable.\n"
"If empty the default target triplet will be searched in $PATH."
msgstr ""

#: compile/compile-object-load.c:146
#, possible-c-format
msgid "Inferior compiled module address %s is not aligned to BFD required %s."
msgstr ""

#: compile/compile-object-load.c:187
#, possible-c-format
msgid "Compiled module \"%s\": multiple symbol definitions: %s"
msgstr ""

#: compile/compile-object-load.c:198
#, possible-c-format
msgid "Compiled module \"%s\" section \"%s\": warning: %s"
msgstr ""

#: compile/compile-object-load.c:210
#, possible-c-format
msgid ""
"Cannot resolve relocation to \"%s\" from compiled module \"%s\" section \"%s"
"\"."
msgstr ""

#: compile/compile-object-load.c:233
#, possible-c-format
msgid "Compiled module \"%s\" section \"%s\": dangerous relocation: %s\n"
msgstr ""

#: compile/compile-object-load.c:246
#, possible-c-format
msgid "Compiled module \"%s\" section \"%s\": unattached relocation: %s\n"
msgstr ""

#: compile/compile-object-load.c:266
#, possible-c-format
msgid "Compile module: warning: %s"
msgstr ""

#: compile/compile-object-load.c:363
#, possible-c-format
msgid "Cannot map compiled module \"%s\" section \"%s\": %s"
msgstr ""

#: compile/compile-object-load.c:371
#, possible-c-format
msgid ""
"Cannot write compiled module \"%s\" section \"%s\" to inferior memory range "
"%s-%s."
msgstr ""

#: compile/compile-object-load.c:442 compile/compile-object-load.c:451
#, possible-c-format
msgid "No \"%s\" symbol found"
msgstr ""

#: compile/compile-object-load.c:455
#, possible-c-format
msgid "Type of \"%s\" is not a pointer"
msgstr ""

#: compile/compile-object-load.c:461
#, possible-c-format
msgid "Expected address scope in compiled module \"%s\"."
msgstr ""

#: compile/compile-object-load.c:467 compile/compile-object-load.c:481
#, possible-c-format
msgid "Invalid type code %d of symbol \"%s\" in compiled module \"%s\"."
msgstr ""

#: compile/compile-object-load.c:488
#, possible-c-format
msgid ""
"Referenced types do not match for symbols \"%s\" and \"%s\" in compiled "
"module \"%s\"."
msgstr ""

#: compile/compile-object-load.c:512
#, possible-c-format
msgid ""
"Invalid type code %d of first parameter of function \"%s\" in compiled "
"module \"%s\"."
msgstr ""

#: compile/compile-object-load.c:519
#, possible-c-format
msgid ""
"Invalid type code %d of dereferenced first parameter of function \"%s\" in "
"compiled module \"%s\"."
msgstr ""

#: compile/compile-object-load.c:553
#, possible-c-format
msgid "Invalid register \"%s\" position %s bits or size %s bits"
msgstr ""

#: compile/compile-object-load.c:559
#, possible-c-format
msgid "Invalid register \"%s\" type code %d"
msgstr ""

#: compile/compile-object-load.c:566
#, possible-c-format
msgid "Register \"%s\" is optimized out."
msgstr ""

#: compile/compile-object-load.c:568
#, possible-c-format
msgid "Register \"%s\" is not available."
msgstr ""

#: compile/compile-object-load.c:573
#, possible-c-format
msgid "Cannot write register \"%s\" to inferior memory at %s."
msgstr ""

#: compile/compile-object-load.c:608
#, possible-c-format
msgid "\"%s\": could not open as compiled module: %s"
msgstr ""

#: compile/compile-object-load.c:612
#, possible-c-format
msgid "\"%s\": not in loadable format: %s"
msgstr ""

#: compile/compile-object-load.c:617
#, possible-c-format
msgid "\"%s\": not in object format."
msgstr ""

#: compile/compile-object-load.c:630
#, possible-c-format
msgid "Cannot read symbols of compiled module \"%s\": %s"
msgstr ""

#: compile/compile-object-load.c:645
#, possible-c-format
msgid "Cannot find function \"%s\" in compiled module \"%s\"."
msgstr ""

#: compile/compile-object-load.c:649
#, possible-c-format
msgid "Invalid type code %d of function \"%s\" in compiled module \"%s\"."
msgstr ""

#: compile/compile-object-load.c:670
#, possible-c-format
msgid "invalid scope %d"
msgstr ""

#: compile/compile-object-load.c:673
#, possible-c-format
msgid "Invalid %d parameters of function \"%s\" in compiled module \"%s\"."
msgstr ""

#: compile/compile-object-load.c:678
#, possible-c-format
msgid "Invalid return type of function \"%s\" in compiled module \"%s\"."
msgstr ""

#: compile/compile-object-load.c:689
#, possible-c-format
msgid "Cannot parse symbols of compiled module \"%s\": %s"
msgstr ""

#: compile/compile-object-load.c:739
#, possible-c-format
msgid "Could not find symbol \"%s\" for compiled module \"%s\"."
msgstr ""

#: compile/compile-object-load.c:746
#, possible-c-format
msgid "%ld symbols were missing, cannot continue."
msgstr ""

#: compile/compile-c-symbols.c:114 compile/compile-cplus-symbols.c:108
#, possible-c-format
msgid "Unsupported LOC_CONST_BYTES for symbol \"%s\"."
msgstr ""

#: compile/compile-c-symbols.c:118 compile/compile-cplus-symbols.c:112
#, possible-c-format
msgid "LOC_UNDEF found for \"%s\"."
msgstr ""

#: compile/compile-c-symbols.c:122 compile/compile-cplus-symbols.c:116
#, possible-c-format
msgid ""
"Fortran common block is unsupported for compilation evaluaton of symbol \"%s"
"\"."
msgstr ""

#: compile/compile-c-symbols.c:127 compile/compile-cplus-symbols.c:121
#, possible-c-format
msgid ""
"Symbol \"%s\" cannot be used for compilation evaluation as it is optimized "
"out."
msgstr ""

#. Probably TLS here.
#: compile/compile-c-symbols.c:135 compile/compile-loc2c.c:633
#: compile/compile-cplus-symbols.c:129
#, possible-c-format
msgid ""
"Symbol \"%s\" is thread-local and currently can only be referenced from the "
"current thread in compiled code."
msgstr ""

#: compile/compile-c-symbols.c:153 compile/compile-loc2c.c:623
#: compile/compile-cplus-symbols.c:147
#, possible-c-format
msgid "Symbol \"%s\" cannot be used because there is no selected frame"
msgstr ""

#: compile/compile-c-symbols.c:160 compile/compile-loc2c.c:629
#: compile/compile-cplus-symbols.c:154
#, possible-c-format
msgid ""
"Symbol \"%s\" cannot be used for compilation evaluation as its address has "
"not been found."
msgstr ""

#: compile/compile-c-symbols.c:587
msgid "Local symbol unhandled when generating C code."
msgstr ""

#: compile/compile-c-symbols.c:590
msgid "LOC_COMPUTED variable missing a method."
msgstr ""

#: compile/compile-c-types.c:48 compile/compile-cplus-types.c:461
msgid "array type with non-constant lower bound is not supported"
msgstr ""

#: compile/compile-c-types.c:51 compile/compile-cplus-types.c:469
msgid "cannot convert array type with non-zero lower bound to C"
msgstr ""

#: compile/compile-c-types.c:60 compile/compile-cplus-types.c:480
msgid "variably-sized vector type is not supported"
msgstr ""

#: compile/compile-c-types.c:171 compile/compile-cplus-types.c:981
msgid "function has unknown return type; assuming int"
msgstr ""

#: compile/compile-c-types.c:329
msgid "variable has unknown type; assuming int"
msgstr ""

#: compile/compile-c-types.c:334
msgid "cannot convert gdb type to gcc type"
msgstr ""

#: compile/compile-cplus-types.c:182
msgid "malformed TYPE_NAME during parsing"
msgstr ""

#. This can happen if we have a DW_AT_declaration DIE
#. for the method, but no "definition"-type DIE (with
#. DW_AT_specification referencing the decl DIE), i.e.,
#. the compiler has probably optimized the method away.
#.
#. In this case, all we can hope to do is issue a warning
#. to the user letting him know.  If the user has not actually
#. requested using this method, things should still work.
#: compile/compile-cplus-types.c:761
#, possible-c-format
msgid ""
"Method %s appears to be optimized out.\n"
"All references to this method will be undefined."
msgstr ""

#: compile/compile-cplus-types.c:1200
#, possible-c-format
msgid "unhandled TYPE_CODE %d"
msgstr ""

#: compile/compile-cplus-types.c:1411
msgid "Set debugging of C++ compile type conversion."
msgstr ""

#: compile/compile-cplus-types.c:1412
msgid "Show debugging of C++ compile type conversion."
msgstr ""

#: compile/compile-cplus-types.c:1413
msgid ""
"When enabled debugging messages are printed during C++ type conversion for\n"
"the compile commands."
msgstr ""

#: compile/compile-cplus-types.c:1422
msgid "Set debugging of C++ compile scopes."
msgstr ""

#: compile/compile-cplus-types.c:1423
msgid "Show debugging of C++ compile scopes."
msgstr ""

#: compile/compile-cplus-types.c:1424
msgid ""
"When enabled debugging messages are printed about definition scopes during\n"
"C++ type conversion for the compile commands."
msgstr ""

#: compile/compile-c-support.c:56
#, possible-c-format
msgid "Invalid GCC mode size %d."
msgstr ""

#: compile/compile-c-support.c:87
#, possible-c-format
msgid "could not find symbol %s in library %s"
msgstr ""

#: compile/compile-c-support.c:118
msgid ""
"The loaded version of GCC does not support the required version of the API."
msgstr ""

#: compile/compile-c-support.c:355 compile/compile-c-support.c:379
#: compile/compile-c-support.c:480
msgid "Unknown compiler scope reached."
msgstr ""

#: compile/compile-loc2c.c:99
msgid "inconsistent stack depths"
msgstr ""

#: compile/compile-loc2c.c:362 compile/compile-loc2c.c:1108
#, possible-c-format
msgid "unhandled DWARF op: %s"
msgstr ""

#: compile/compile-loc2c.c:876 dwarf2loc.c:3126
msgid "No block found for address"
msgstr ""

#: compile/compile-loc2c.c:881 dwarf2loc.c:3131
msgid "No function found for block"
msgstr ""

#: compile/compile-loc2c.c:958 dwarf2loc.c:3188
#, possible-c-format
msgid "Unsupported size %d in %s"
msgstr ""

#: complaints.c:52
msgid "During symbol reading: "
msgstr ""

#: complaints.c:72
#, possible-c-format
msgid "Max number of complaints about incorrect symbols is %s.\n"
msgstr ""

#: complaints.c:81
msgid "Set max number of complaints about incorrect symbols."
msgstr ""

#: complaints.c:82
msgid "Show max number of complaints about incorrect symbols."
msgstr ""

#: completer.c:1593
msgid "Max completions reached."
msgstr ""

#: completer.c:2361
msgid "*** List may be truncated, max-completions reached. ***"
msgstr ""

#: completer.c:2942
msgid "Set maximum number of completion candidates."
msgstr ""

#: completer.c:2943
msgid "Show maximum number of completion candidates."
msgstr ""

#: completer.c:2944
msgid ""
"Use this to limit the number of candidates considered\n"
"during completion.  Specifying \"unlimited\" or -1\n"
"disables limiting.  Note that setting either no limit or\n"
"a very large limit can make completion slow."
msgstr ""

#: copying.c:647 copying.c:655
msgid "Conditions for redistributing copies of GDB."
msgstr ""

#: copying.c:650 copying.c:657
msgid "Various kinds of warranty you do not have."
msgstr ""

#: corefile.c:136
msgid "core file may not match specified executable file."
msgstr ""

#: corefile.c:138
msgid "exec file is newer than core file."
msgstr ""

#: corefile.c:152
msgid ""
"No executable file specified.\n"
"Use the \"file\" or \"exec-file\" command."
msgstr ""

#. Actually, address between memaddr and memaddr + len was out of
#. bounds.
#: corefile.c:167
#, possible-c-format
msgid "Cannot access memory at address %s"
msgstr ""

#: corefile.c:170
#, possible-c-format
msgid "Memory at address %s unavailable."
msgstr ""

#: corefile.c:429
#, possible-c-format
msgid "The current BFD target is \"%s\".\n"
msgstr ""

#: corefile.c:487
msgid ""
"Use FILE as core dump for examining memory and registers.\n"
"Usage: core-file FILE\n"
"No arg means have no core file.  This command has been superseded by the\n"
"`target core' and `detach' commands."
msgstr ""

#: corefile.c:496
msgid "Set the current BFD target."
msgstr ""

#: corefile.c:497
msgid "Show the current BFD target."
msgstr ""

#: corefile.c:498
msgid "Use `set gnutarget auto' to specify automatic detection."
msgstr ""

#: corelow.c:59
msgid "Local core dump file"
msgstr ""

#: corelow.c:60
msgid ""
"Use a core file as a target.\n"
"Specify the filename of the core file."
msgstr ""

#: corelow.c:147 record-full.c:932
#, possible-c-format
msgid "\"%s\": Can't find sections: %s"
msgstr ""

#: corelow.c:220
#, possible-c-format
msgid "\"%s\": ambiguous core format, %d handlers match"
msgstr ""

#: corelow.c:224
#, possible-c-format
msgid "\"%s\": no core file handler recognizes format"
msgstr ""

#: corelow.c:331
msgid "No core file now.\n"
msgstr ""

#: corelow.c:390
msgid "No core file specified.  (Use `detach' to stop debugging a core file.)"
msgstr ""

#: corelow.c:393
msgid "No core file specified."
msgstr ""

#. Do it after the err msg
#. FIXME: should be checking for errors from bfd_close (for one
#. thing, on error it does not free all the storage associated
#. with the bfd).
#: corelow.c:423
#, possible-c-format
msgid "\"%s\" is not a core dump: %s"
msgstr ""

#: corelow.c:502
#, possible-c-format
msgid "Core was generated by `%s'.\n"
msgstr ""

#: corelow.c:524
#, possible-c-format
msgid "Program terminated with signal %s, %s.\n"
msgstr ""

#: corelow.c:607
#, possible-c-format
msgid "Couldn't find %s registers in core file."
msgstr ""

#: corelow.c:615
#, possible-c-format
msgid "Section `%s' in core file too small."
msgstr ""

#: corelow.c:621
#, possible-c-format
msgid "Unexpected size of section `%s' in core file."
msgstr ""

#: corelow.c:629
#, possible-c-format
msgid "Couldn't read %s registers from `%s' section in core file."
msgstr ""

#: corelow.c:777
msgid "Couldn't read NT_AUXV note in core file."
msgstr ""

#: corelow.c:812
msgid "Couldn't read StackGhost cookie in core file."
msgstr ""

#: cp-abi.c:39
msgid "ABI doesn't define required function is_constructor_name"
msgstr ""

#: cp-abi.c:47
msgid "ABI doesn't define required function is_destructor_name"
msgstr ""

#: cp-abi.c:55
msgid "ABI doesn't define required function is_vtable_name"
msgstr ""

#: cp-abi.c:63
msgid "ABI doesn't define required function is_operator_name"
msgstr ""

#: cp-abi.c:88
msgid "Cannot determine virtual baseclass offset of incomplete object"
msgstr ""

#: cp-abi.c:133 cp-abi.c:141 cp-abi.c:150 cp-abi.c:168
msgid "GDB does not support pointers to methods on this target"
msgstr ""

#: cp-abi.c:178
msgid "GDB cannot print the vtable on this target"
msgstr ""

#: cp-abi.c:188
msgid "GDB cannot find the typeid on this target"
msgstr ""

#: cp-abi.c:198
msgid "GDB cannot find the type for 'typeid' on this target"
msgstr ""

#: cp-abi.c:208
msgid "GDB cannot find the type from a std::type_info on this target"
msgstr ""

#: cp-abi.c:218
msgid "GDB cannot find the type name from a std::type_info on this target"
msgstr ""

#: cp-abi.c:253
msgid "Too many C++ ABIs, please increase CP_ABI_MAX in cp-abi.c"
msgstr ""

#: cp-abi.c:271
#, possible-c-format
msgid "Cannot find C++ ABI \"%s\" to set it as auto default."
msgstr ""

#: cp-abi.c:352
#, possible-c-format
msgid "Could not find \"%s\" in ABI list"
msgstr ""

#: cp-abi.c:400
msgid ""
"Set the ABI used for inspecting C++ objects.\n"
"\"set cp-abi\" with no arguments will list the available ABIs."
msgstr ""

#: cp-abi.c:407
msgid "Show the ABI used for inspecting C++ objects."
msgstr ""

#: cp-name-parser.y:1571
msgid "empty character constant"
msgstr ""

#: cp-name-parser.y:1578
msgid "invalid character constant"
msgstr ""

#: cp-name-parser.y:1705
msgid "invalid number"
msgstr ""

#. These can't occur in C++ names.
#: cp-name-parser.y:1781
msgid "unexpected string literal"
msgstr ""

#. We must have come across a bad character (e.g. ';').
#: cp-name-parser.y:1788
msgid "invalid character"
msgstr ""

#: cp-namespace.c:980
msgid "cp_lookup_nested_symbol called on a non-aggregate type."
msgstr ""

#: cp-namespace.c:1061
msgid "The `maint namespace' command was removed.\n"
msgstr ""

#: cp-namespace.c:1071
msgid "Deprecated placeholder for removed functionality."
msgstr ""

#: cp-support.c:576
#, possible-c-format
msgid "internal error: string \"%s\" failed to be canonicalized"
msgstr ""

#: cp-support.c:1442
#, possible-c-format
msgid "RTTI symbol not found for class '%s'"
msgstr ""

#: cp-support.c:1448
#, possible-c-format
msgid "RTTI symbol for class '%s' is not a type"
msgstr ""

#. chastain/2003-11-26: the symbol tables often contain fake
#. symbols for namespaces with the same name as the struct.
#. This warning is an indication of a bug in the lookup order
#. or a bug in the way that the symbol tables are populated.
#: cp-support.c:1463
#, possible-c-format
msgid "RTTI symbol for class '%s' is a namespace"
msgstr ""

#: cp-support.c:1466
#, possible-c-format
msgid "RTTI symbol for class '%s' has bad type"
msgstr ""

#: cp-support.c:1515
#, possible-c-format
msgid "unable to demangle '%s' (demangler failed with signal %d)"
msgstr ""

#: cp-support.c:1529
#, possible-c-format
msgid ""
"%s\n"
"Attempting to dump core.\n"
msgstr ""

#: cp-support.c:2031
#, possible-c-format
msgid ""
"%s:%d: make-paramless self-test failed: (completion=%d) \"%s\" -> %s, "
"expected %s"
msgstr ""

#: cp-support.c:2126
msgid "\"maintenance cplus\" must be followed by the name of a command.\n"
msgstr ""

#: cp-support.c:2171
msgid "C++ maintenance commands."
msgstr ""

#: cp-support.c:2182
msgid "Print the first class/namespace component of NAME."
msgstr ""

#: cp-support.c:2186
msgid ""
"Show the virtual function table for a C++ object.\n"
"Usage: info vtbl EXPRESSION\n"
"Evaluate EXPRESSION and display the virtual function table for the\n"
"resulting object."
msgstr ""

#: cp-support.c:2193
msgid "Set whether to attempt to catch demangler crashes."
msgstr ""

#: cp-support.c:2194
msgid "Show whether to attempt to catch demangler crashes."
msgstr ""

#: cp-support.c:2195
msgid ""
"If enabled GDB will attempt to catch demangler crashes and\n"
"display the offending symbol."
msgstr ""

#: cp-valprint.c:281 p-valprint.c:634 valprint.c:351
msgid "<synthetic pointer>"
msgstr ""

#: cp-valprint.c:641 cp-valprint.c:673 p-valprint.c:868
msgid "<same as static member of an already seen type>"
msgstr ""

#: cris-tdep.c:283 i386-linux-tdep.c:315
msgid "Couldn't recognize signal trampoline."
msgstr ""

#. Invalid (unimplemented) register.  Should not happen as there are
#. no unimplemented CRISv32 registers.
#: cris-tdep.c:1595
#, possible-c-format
msgid "crisv32_register_type: unknown regno %d"
msgstr ""

#: cris-tdep.c:1629
msgid "cris_store_return_value: type length too large."
msgstr ""

#: cris-tdep.c:1797
msgid "cris_extract_return_value: type length too large"
msgstr ""

#. Could not find a target.  Things are likely to go downhill
#. from here.
#: cris-tdep.c:2040
msgid "CRIS software single step could not find a step target."
msgstr ""

#: cris-tdep.c:3807
msgid "wrong size gregset struct in core file"
msgstr ""

#: cris-tdep.c:3840
msgid "Set the current CRIS version."
msgstr ""

#: cris-tdep.c:3841
msgid "Show the current CRIS version."
msgstr ""

#: cris-tdep.c:3842
msgid ""
"Set to 10 for CRISv10 or 32 for CRISv32 if autodetection fails.\n"
"Defaults to 10. "
msgstr ""

#: cris-tdep.c:3852
msgid "Set the current CRIS mode."
msgstr ""

#: cris-tdep.c:3853
msgid "Show the current CRIS mode."
msgstr ""

#: cris-tdep.c:3854
msgid ""
"Set to CRIS_MODE_GURU when debugging in guru mode.\n"
"Makes GDB use the NRP register instead of the ERP register in certain cases."
msgstr ""

#: cris-tdep.c:3863
msgid "Set the usage of Dwarf-2 CFI for CRIS."
msgstr ""

#: cris-tdep.c:3864
msgid "Show the usage of Dwarf-2 CFI for CRIS."
msgstr ""

#: cris-tdep.c:3865
msgid "Set this to \"off\" if using gcc-cris < R59."
msgstr ""

#: cris-tdep.c:3903 cris-tdep.c:3929
msgid "cris_gdbarch_update: failed to update architecture."
msgstr ""

#: csky-tdep.c:1602
#, possible-c-format
msgid "Invalid breakpoint address 0x%x is an odd number."
msgstr ""

#: csky-tdep.c:2253
msgid "Set C-Sky debugging."
msgstr ""

#: csky-tdep.c:2254
msgid "Show C-Sky debugging."
msgstr ""

#: csky-tdep.c:2255
msgid "When on, C-Sky specific debugging is enabled."
msgstr ""

#: ctfread.c:208
#, possible-c-format
msgid "An internal GDB problem: ctf_ id_t %ld type already set"
msgstr ""

#: ctfread.c:342
#, possible-c-format
msgid "ctf_add_member_cb: %s has NO type (%ld)"
msgstr ""

#: ctfread.c:473
#, possible-c-format
msgid "ctf_type_encoding read_base_type failed - %s"
msgstr ""

#: ctfread.c:483
#, possible-c-format
msgid "ctf_type_aname read_base_type failed - %s"
msgstr ""

#: ctfread.c:530
#, possible-c-format
msgid "read_base_type: unsupported base kind (%d)"
msgstr ""

#: ctfread.c:594
#, possible-c-format
msgid "ctf_member_iter process_struct_members failed - %s"
msgstr ""

#: ctfread.c:675
#, possible-c-format
msgid "ctf_enum_iter process_enum_type failed - %s"
msgstr ""

#: ctfread.c:726
#, possible-c-format
msgid "ctf_array_info read_array_type failed - %s"
msgstr ""

#: ctfread.c:769
#, possible-c-format
msgid "read_const_type: NULL base type (%ld)"
msgstr ""

#: ctfread.c:793
#, possible-c-format
msgid "read_volatile_type: NULL base type (%ld)"
msgstr ""

#: ctfread.c:819
#, possible-c-format
msgid "read_restrict_type: NULL base type (%ld)"
msgstr ""

#: ctfread.c:864
#, possible-c-format
msgid "read_pointer_type: NULL target type (%ld)"
msgstr ""

#: ctfread.c:1040
#, possible-c-format
msgid "ctf_add_var_cb: %s has NO type (%ld)"
msgstr ""

#: ctfread.c:1052
#, possible-c-format
msgid "ctf_add_var_cb: kind unsupported (%d)"
msgstr ""

#: ctfread.c:1210
#, possible-c-format
msgid "ctf_type_iter psymtab_to_symtab failed - %s"
msgstr ""

#: ctfread.c:1216
#, possible-c-format
msgid "ctf_variable_iter psymtab_to_symtab failed - %s"
msgstr ""

#: ctfread.c:1246 dwarf2read.c:9513
#, possible-c-format
msgid "bug: psymtab for %s is already read in."
msgstr ""

#: ctfread.c:1251
#, possible-c-format
msgid "Reading in CTF data for %s..."
msgstr ""

#: ctfread.c:1270 dwarf2read.c:9544 mdebugread.c:295
msgid "done.\n"
msgstr ""

#: ctfread.c:1405
#, possible-c-format
msgid "ctf_type_iter scan_partial_symbols failed - %s"
msgstr ""

#: ctfread.c:1409
#, possible-c-format
msgid "ctf_variable_iter scan_partial_symbols failed - %s"
msgstr ""

#: ctfread.c:1469
#, possible-c-format
msgid "ctf_bfdopen failed on %s - %s"
msgstr ""

#: ctfread.c:1474
#, possible-c-format
msgid "ctf_arc_open_by_name failed on %s - %s"
msgstr ""

#: d-exp.y:453
msgid "No symbol table is loaded.  Use the \"file\" command"
msgstr ""

#. We must have come across a bad character (e.g. ';').
#: d-exp.y:1245
#, possible-c-format
msgid "Invalid character '%c' in expression"
msgstr ""

#: darwin-nat-info.c:53
#, possible-c-format
msgid "%s must be specified with 0x..."
msgstr ""

#: darwin-nat-info.c:57
#, possible-c-format
msgid ":\t%#lx\n"
msgstr ""

#: darwin-nat-info.c:60
#, possible-c-format
msgid ":\t%u.%06u sec\n"
msgstr ""

#: darwin-nat-info.c:86
#, possible-c-format
msgid "%d processes:\n"
msgstr ""

#: darwin-nat-info.c:97
#, possible-c-format
msgid "    %s is %d has task %#x\n"
msgstr ""

#: darwin-nat-info.c:103
#, possible-c-format
msgid "    %s is %d unknown task port\n"
msgstr ""

#: darwin-nat-info.c:121 darwin-nat-info.c:804 darwin-nat-info.c:828
msgid "No inferior running\n"
msgstr ""

#: darwin-nat-info.c:132
#, possible-c-format
msgid "cannot parse task id '%s'\n"
msgstr ""

#: darwin-nat-info.c:156
#, possible-c-format
msgid "TASK_BASIC_INFO for 0x%x:\n"
msgstr ""

#: darwin-nat-info.c:168
msgid ""
"\n"
"TASK_EVENTS_INFO:\n"
msgstr ""

#: darwin-nat-info.c:184
msgid ""
"\n"
"TASK_THREAD_TIMES_INFO:\n"
msgstr ""

#: darwin-nat-info.c:214
#, possible-c-format
msgid "Ports for task 0x%x:\n"
msgstr ""

#: darwin-nat-info.c:215
msgid "port   type\n"
msgstr ""

#: darwin-nat-info.c:235
#, possible-c-format
msgid "%04x: %08x "
msgstr ""

#: darwin-nat-info.c:242
#, possible-c-format
msgid " %s("
msgstr ""

#: darwin-nat-info.c:245
msgid "??"
msgstr ""

#: darwin-nat-info.c:247
#, possible-c-format
msgid "%u"
msgstr ""

#: darwin-nat-info.c:248
msgid " refs)"
msgstr ""

#: darwin-nat-info.c:254
msgid " gdb-task"
msgstr ""

#: darwin-nat-info.c:256
msgid " host-self"
msgstr ""

#: darwin-nat-info.c:258
msgid " gdb-exception"
msgstr ""

#: darwin-nat-info.c:260
msgid " gdb-port_set"
msgstr ""

#: darwin-nat-info.c:267
msgid " inferior-task"
msgstr ""

#: darwin-nat-info.c:269
msgid " inferior-notify"
msgstr ""

#: darwin-nat-info.c:275
msgid " inferior-excp-port"
msgstr ""

#: darwin-nat-info.c:283
#, possible-c-format
msgid " inferior-thread for 0x%x"
msgstr ""

#: darwin-nat-info.c:313
#, possible-c-format
msgid "Port 0x%lx in task 0x%lx:\n"
msgstr ""

#: darwin-nat-info.c:315
#, possible-c-format
msgid "  port set: 0x%x\n"
msgstr ""

#: darwin-nat-info.c:316
#, possible-c-format
msgid "     seqno: 0x%x\n"
msgstr ""

#: darwin-nat-info.c:317
#, possible-c-format
msgid "   mscount: 0x%x\n"
msgstr ""

#: darwin-nat-info.c:318
#, possible-c-format
msgid "    qlimit: 0x%x\n"
msgstr ""

#: darwin-nat-info.c:319
#, possible-c-format
msgid "  msgcount: 0x%x\n"
msgstr ""

#: darwin-nat-info.c:320
#, possible-c-format
msgid "  sorights: 0x%x\n"
msgstr ""

#: darwin-nat-info.c:321
#, possible-c-format
msgid "   srights: 0x%x\n"
msgstr ""

#: darwin-nat-info.c:322
#, possible-c-format
msgid " pdrequest: 0x%x\n"
msgstr ""

#: darwin-nat-info.c:323
#, possible-c-format
msgid " nsrequest: 0x%x\n"
msgstr ""

#: darwin-nat-info.c:324
#, possible-c-format
msgid "     flags: 0x%x\n"
msgstr ""

#: darwin-nat-info.c:333
msgid "Task and port"
msgstr ""

#: darwin-nat-info.c:355
#, possible-c-format
msgid "Threads in task %#x:\n"
msgstr ""

#: darwin-nat-info.c:358
#, possible-c-format
msgid "    %#x\n"
msgstr ""

#: darwin-nat-info.c:378
msgid "Thread"
msgstr ""

#: darwin-nat-info.c:381
msgid "THREAD_BASIC_INFO\n"
msgstr ""

#: darwin-nat-info.c:432
msgid "share"
msgstr ""

#: darwin-nat-info.c:434
msgid "copy "
msgstr ""

#: darwin-nat-info.c:436
msgid "none "
msgstr ""

#: darwin-nat-info.c:438
msgid "???  "
msgstr ""

#: darwin-nat-info.c:448
msgid "cow"
msgstr ""

#: darwin-nat-info.c:450
msgid "private"
msgstr ""

#: darwin-nat-info.c:452
msgid "empty"
msgstr ""

#: darwin-nat-info.c:454
msgid "shared"
msgstr ""

#: darwin-nat-info.c:456
msgid "true-shrd"
msgstr ""

#: darwin-nat-info.c:458
msgid "prv-alias"
msgstr ""

#: darwin-nat-info.c:460
msgid "shr-alias"
msgstr ""

#: darwin-nat-info.c:462
msgid "???"
msgstr ""

#: darwin-nat-info.c:472 darwin-nat-info.c:755
msgid "default"
msgstr ""

#: darwin-nat-info.c:474
msgid "malloc"
msgstr ""

#: darwin-nat-info.c:476
msgid "malloc_small"
msgstr ""

#: darwin-nat-info.c:478
msgid "malloc_large"
msgstr ""

#: darwin-nat-info.c:480
msgid "malloc_huge"
msgstr ""

#: darwin-nat-info.c:482
msgid "sbrk"
msgstr ""

#: darwin-nat-info.c:484
msgid "realloc"
msgstr ""

#: darwin-nat-info.c:486
msgid "malloc_tiny"
msgstr ""

#: darwin-nat-info.c:488
msgid "analysis_tool"
msgstr ""

#: darwin-nat-info.c:490
msgid "mach_msg"
msgstr ""

#: darwin-nat-info.c:492
msgid "iokit"
msgstr ""

#: darwin-nat-info.c:494
msgid "stack"
msgstr ""

#: darwin-nat-info.c:496
msgid "guard"
msgstr ""

#: darwin-nat-info.c:498
msgid "shared_pmap"
msgstr ""

#: darwin-nat-info.c:500
msgid "dylib"
msgstr ""

#: darwin-nat-info.c:502
msgid "appkit"
msgstr ""

#: darwin-nat-info.c:504
msgid "foundation"
msgstr ""

#: darwin-nat-info.c:529
msgid "No memory regions."
msgstr ""

#: darwin-nat-info.c:573
#, possible-c-format
msgid "%s-%s %s/%s  %s %s %s"
msgstr ""

#: darwin-nat-info.c:579
msgid "shrd"
msgstr ""

#: darwin-nat-info.c:579
msgid "priv"
msgstr ""

#: darwin-nat-info.c:580
msgid "reserved"
msgstr ""

#: darwin-nat-info.c:580
msgid "not-rsvd"
msgstr ""

#: darwin-nat-info.c:583
#, possible-c-format
msgid " (%d sub-rgn)"
msgstr ""

#: darwin-nat-info.c:670
msgid "sm "
msgstr ""

#: darwin-nat-info.c:670
msgid "obj"
msgstr ""

#: darwin-nat-info.c:734
msgid "Inferior not available"
msgstr ""

#: darwin-nat-info.c:746
#, possible-c-format
msgid "%d exceptions:\n"
msgstr ""

#: darwin-nat-info.c:751
#, possible-c-format
msgid "port 0x%04x, behavior: "
msgstr ""

#: darwin-nat-info.c:758
msgid "state"
msgstr ""

#: darwin-nat-info.c:761
msgid "state-identity"
msgstr ""

#: darwin-nat-info.c:764
#, possible-c-format
msgid "0x%x"
msgstr ""

#: darwin-nat-info.c:766
msgid ", masks:"
msgstr ""

#: darwin-nat-info.c:768
msgid " BAD_ACCESS"
msgstr ""

#: darwin-nat-info.c:770
msgid " BAD_INSTRUCTION"
msgstr ""

#: darwin-nat-info.c:772
msgid " ARITHMETIC"
msgstr ""

#: darwin-nat-info.c:774
msgid " EMULATION"
msgstr ""

#: darwin-nat-info.c:776
msgid " SOFTWARE"
msgstr ""

#: darwin-nat-info.c:778
msgid " BREAKPOINT"
msgstr ""

#: darwin-nat-info.c:780
msgid " SYSCALL"
msgstr ""

#: darwin-nat-info.c:782
msgid " MACH_SYSCALL"
msgstr ""

#: darwin-nat-info.c:784
msgid " RPC_ALERT"
msgstr ""

#: darwin-nat-info.c:786
msgid " CRASH"
msgstr ""

#: darwin-nat-info.c:821
msgid "Parameter is saved, host or none"
msgstr ""

#: darwin-nat-info.c:845
msgid "Get list of tasks in system."
msgstr ""

#: darwin-nat-info.c:847
msgid "Get list of ports in a task."
msgstr ""

#: darwin-nat-info.c:849
msgid "Get info on a specific port."
msgstr ""

#: darwin-nat-info.c:851
msgid "Get info on a specific task."
msgstr ""

#: darwin-nat-info.c:853
msgid "Get list of threads in a task."
msgstr ""

#: darwin-nat-info.c:855
msgid "Get info on a specific thread."
msgstr ""

#: darwin-nat-info.c:858
msgid "Get information on all mach region for the task."
msgstr ""

#: darwin-nat-info.c:860
msgid "Get information on all mach sub region for the task."
msgstr ""

#: darwin-nat-info.c:862
msgid "Get information on mach region at given address."
msgstr ""

#: darwin-nat-info.c:865
msgid "Disp mach exceptions."
msgstr ""

#: darwin-nat.c:176
#, possible-c-format
msgid "[%d inferior]: "
msgstr ""

#: darwin-nat.c:188
msgid "[UNKNOWN]"
msgstr ""

#: darwin-nat.c:190
#, possible-c-format
msgid "Mach error at \"%s:%u\" in function \"%s\": %s (0x%lx)"
msgstr ""

#: darwin-nat.c:222
#, c-format
msgid "unknown (%d)"
msgstr ""

#: darwin-nat.c:247
#, possible-c-format
msgid "ptrace (%s, %d, 0x%lx, %d): %d (%s)\n"
msgstr ""

#: darwin-nat.c:249
msgid "no error"
msgstr ""

#: darwin-nat.c:325
#, possible-c-format
msgid " new_ix:%d/%d, old_ix:%d/%d, new_id:0x%x old_id:0x%x\n"
msgstr ""

#: darwin-nat.c:485
msgid "message header:\n"
msgstr ""

#: darwin-nat.c:486
#, possible-c-format
msgid " bits: 0x%x\n"
msgstr ""

#: darwin-nat.c:487
#, possible-c-format
msgid " size: 0x%x\n"
msgstr ""

#: darwin-nat.c:488
#, possible-c-format
msgid " remote-port: 0x%x\n"
msgstr ""

#: darwin-nat.c:489
#, possible-c-format
msgid " local-port: 0x%x\n"
msgstr ""

#: darwin-nat.c:490
#, possible-c-format
msgid " reserved: 0x%x\n"
msgstr ""

#: darwin-nat.c:491
#, possible-c-format
msgid " id: 0x%x\n"
msgstr ""

#: darwin-nat.c:510
#, possible-c-format
msgid "body: descriptor_count=%u\n"
msgstr ""

#: darwin-nat.c:519
#, possible-c-format
msgid " descr %d: type=%u (port) name=0x%x, dispo=%d\n"
msgstr ""

#: darwin-nat.c:523
#, possible-c-format
msgid " descr %d: type=%u\n"
msgstr ""

#: darwin-nat.c:533
#, possible-c-format
msgid "NDR: mig=%02x if=%02x encod=%02x int=%02x char=%02x float=%02x\n"
msgstr ""

#: darwin-nat.c:541
msgid "  data:"
msgstr ""

#: darwin-nat.c:694
#, possible-c-format
msgid "darwin_decode_exception_message: unknown task 0x%x\n"
msgstr ""

#: darwin-nat.c:842
#, possible-c-format
msgid "darwin_resume_thread: state=%d, thread=0x%x, step=%d nsignal=%d\n"
msgstr ""

#: darwin-nat.c:855
#, possible-c-format
msgid "ptrace THUP: res=%d\n"
msgstr ""

#: darwin-nat.c:862
#, possible-c-format
msgid "darwin_resume_thread: kill 0x%x %d: %d\n"
msgstr ""

#. Set or reset single step.
#: darwin-nat.c:868
#, possible-c-format
msgid "darwin_set_sstep (thread=0x%x, enable=%d)\n"
msgstr ""

#: darwin-nat.c:951
#, possible-c-format
msgid "darwin_resume: pid=%d, tid=0x%lx, step=%d, signal=%d\n"
msgstr ""

#: darwin-nat.c:1025
#, possible-c-format
msgid "darwin_wait: ill-formatted message (id=0x%x)\n"
msgstr ""

#: darwin-nat.c:1045
#, possible-c-format
msgid "darwin_wait: thread=0x%x, got %s\n"
msgstr ""

#: darwin-nat.c:1068
#, possible-c-format
msgid "  (signal %d: %s)\n"
msgstr ""

#: darwin-nat.c:1109
#, possible-c-format
msgid "darwin_wait: ill-formatted message (id=0x%x, res=%d)\n"
msgstr ""

#: darwin-nat.c:1134
#, possible-c-format
msgid "wait4: res=%d: %s\n"
msgstr ""

#: darwin-nat.c:1150
#, possible-c-format
msgid "darwin_wait: pid=%d exit, status=0x%x\n"
msgstr ""

#: darwin-nat.c:1161
#, possible-c-format
msgid "darwin_wait: pid=%d\n"
msgstr ""

#. Unknown message.
#: darwin-nat.c:1170
#, possible-c-format
msgid "darwin: got unknown message, id: 0x%x"
msgstr ""

#: darwin-nat.c:1220
#, possible-c-format
msgid "darwin_wait: waiting for a message pid=%d thread=%lx\n"
msgstr ""

#: darwin-nat.c:1256
#, possible-c-format
msgid "mach_msg: ret=0x%x\n"
msgstr ""

#: darwin-nat.c:1293
#, possible-c-format
msgid "darwin_wait: mach_msg(pending) ret=0x%x\n"
msgstr ""

#: darwin-nat.c:1315
#, possible-c-format
msgid "darwin_wait: thread 0x%x hit a non-gdb breakpoint\n"
msgstr ""

#: darwin-nat.c:1319
msgid "darwin_wait: unhandled pending message\n"
msgstr ""

#: darwin-nat.c:1437
#, possible-c-format
msgid "cannot kill: %s"
msgstr ""

#: darwin-nat.c:1507
#, possible-c-format
msgid "Unable to save exception ports, task_get_exception_portsreturned: %d"
msgstr ""

#: darwin-nat.c:1519
#, possible-c-format
msgid "Unable to set exception ports, task_set_exception_portsreturned: %d"
msgstr ""

#: darwin-nat.c:1570
#, possible-c-format
msgid "Failed to kill inferior: kill (%d, 9) returned [%s]"
msgstr ""

#: darwin-nat.c:1589
#, possible-c-format
msgid ""
"Termination notification request failed, mach_port_request_notification\n"
"returned: %d"
msgstr ""

#. This is unexpected, as there should not be any previously
#. registered notification request.  But this is not a fatal
#. issue, so just emit a warning.
#: darwin-nat.c:1598
msgid ""
"A task termination request was registered before the debugger registered\n"
"its own.  This is unexpected, but should otherwise not have any actual\n"
"impact on the debugging session."
msgstr ""

#: darwin-nat.c:1627
#, possible-c-format
msgid ""
"Unable to find Mach task port for process-id %d: %s (0x%lx).\n"
" (please check gdb is codesigned - see taskgated(8))"
msgstr ""

#: darwin-nat.c:1632
#, possible-c-format
msgid "inferior task: 0x%x, pid: %d\n"
msgstr ""

#: darwin-nat.c:1641
#, possible-c-format
msgid "Unable to create exception port, mach_port_allocate returned: %d"
msgstr ""

#: darwin-nat.c:1649
#, possible-c-format
msgid "Unable to create exception port, mach_port_insert_right returned: %d"
msgstr ""

#: darwin-nat.c:1657
#, possible-c-format
msgid "Unable to create port set, mach_port_allocate returned: %d"
msgstr ""

#: darwin-nat.c:1664
#, possible-c-format
msgid ""
"Unable to move exception port into new port set, mach_port_move_member\n"
"returned: %d"
msgstr ""

#: darwin-nat.c:1674
#, possible-c-format
msgid "Unable to create notification port, mach_port_allocate returned: %d"
msgstr ""

#: darwin-nat.c:1681
#, possible-c-format
msgid ""
"Unable to move notification port into new port set, mach_port_move_member\n"
"returned: %d"
msgstr ""

#: darwin-nat.c:1753
#, possible-c-format
msgid "unable to read from pipe, read returned: %d"
msgstr ""

#: darwin-nat.c:1779
#, possible-c-format
msgid "unable to create a pipe: %s"
msgstr ""

#: darwin-nat.c:1867
#, possible-c-format
msgid "Could not open shell (%s) for reading: %s"
msgstr ""

#: darwin-nat.c:1872
#, possible-c-format
msgid "Could not make cache directory \"%s\": %s"
msgstr ""

#: darwin-nat.c:1880
#, possible-c-format
msgid "Could not open temporary file \"%s\" for writing: %s"
msgstr ""

#: darwin-nat.c:1885
#, possible-c-format
msgid "Could not copy shell to cache as \"%s\": %s"
msgstr ""

#: darwin-nat.c:1891
#, possible-c-format
msgid "Could not rename shell cache file to \"%s\": %s"
msgstr ""

#: darwin-nat.c:1920
#, possible-c-format
msgid ""
"This version of macOS has System Integrity Protection.\n"
"Normally gdb would try to work around this by caching a copy of your shell,\n"
"but because your shell (%s) is not an absolute path, this is being skipped."
msgstr ""

#: darwin-nat.c:1930
#, possible-c-format
msgid ""
"This version of macOS has System Integrity Protection.\n"
"Normally gdb would try to work around this by caching a copy of your shell,\n"
"but because gdb could not stat your shell (%s), this is being skipped.\n"
"The error was: %s"
msgstr ""

#: darwin-nat.c:1956
#, possible-c-format
msgid ""
"This version of macOS has System Integrity Protection.\n"
"Because `startup-with-shell' is enabled, gdb tried to work around SIP by\n"
"caching a copy of your shell.  However, this failed:\n"
"%s\n"
"If you correct the problem, gdb will automatically try again the next time\n"
"you \"run\".  To prevent these attempts, you can use:\n"
"    set startup-with-shell off"
msgstr ""

#: darwin-nat.c:1967
#, possible-c-format
msgid ""
"Note: this version of macOS has System Integrity Protection.\n"
"Because `startup-with-shell' is enabled, gdb has worked around this by\n"
"caching a copy of your shell.  The shell used by \"run\" is now:\n"
"    %s\n"
msgstr ""

#: darwin-nat.c:1994
msgid "startup-with-shell is now temporarily disabled"
msgstr ""

#. Trying to masturbate?
#: darwin-nat.c:2044 gnu-nat.c:2205 inf-ptrace.c:200
msgid "I refuse to debug myself!"
msgstr ""

#: darwin-nat.c:2051 inf-ptrace.c:216 remote.c:5798
#, possible-c-format
msgid "Attaching to program: %s, %s\n"
msgstr ""

#: darwin-nat.c:2054 inf-ptrace.c:219 procfs.c:1889 remote.c:5801
#, possible-c-format
msgid "Attaching to %s\n"
msgstr ""

#: darwin-nat.c:2059
#, possible-c-format
msgid "Can't attach to process %d: %s (%d)"
msgstr ""

#: darwin-nat.c:2111
#, possible-c-format
msgid "Unable to detach from process-id %d: %s (%d)"
msgstr ""

#: darwin-nat.c:2132
#, possible-c-format
msgid "Thread 0x%lx of process %u"
msgstr ""

#: darwin-nat.c:2158
#, possible-c-format
msgid "darwin_read_write_inferior(task=0x%x, %s, len=%s)\n"
msgstr ""

#: darwin-nat.c:2175
#, possible-c-format
msgid "darwin_read_write_inferior: mach_vm_read failed at %s: %s"
msgstr ""

#: darwin-nat.c:2205
#, possible-c-format
msgid "darwin_read_write_inferior: mach_vm_region_recurse failed at %s: %s\n"
msgstr ""

#: darwin-nat.c:2213
#, possible-c-format
msgid ""
"darwin_read_write_inferior: mach_vm_region_recurse addr=%s, start=%s, len="
"%s\n"
msgstr ""

#: darwin-nat.c:2222
#, possible-c-format
msgid "No memory at %s (vs %s+0x%x).  Nothing written"
msgstr ""

#: darwin-nat.c:2249
#, possible-c-format
msgid ""
"darwin_read_write_inferior: mach_vm_protect failed at %s (len=0x%lx, prot=0x"
"%x): %s"
msgstr ""

#: darwin-nat.c:2268
#, possible-c-format
msgid "darwin_read_write_inferior: mach_vm_write failed: %s"
msgstr ""

#: darwin-nat.c:2280
#, possible-c-format
msgid ""
"darwin_read_write_inferior: mach_vm_protect restore failed at %s (len=0x"
"%lx): %s"
msgstr ""

#: darwin-nat.c:2340
#, possible-c-format
msgid "darwin_xfer_partial(%s, %s, rbuf=%s, wbuf=%s) pid=%u\n"
msgstr ""

#: darwin-nat.c:2501
#, possible-c-format
msgid "GDB task: 0x%lx, pid: %d\n"
msgstr ""

#: darwin-nat.c:2505
msgid "Set if printing inferior communication debugging statements."
msgstr ""

#: darwin-nat.c:2506
msgid "Show if printing inferior communication debugging statements."
msgstr ""

#: darwin-nat.c:2512
msgid "Set if mach exceptions are caught."
msgstr ""

#: darwin-nat.c:2513
msgid "Show if mach exceptions are caught."
msgstr ""

#: darwin-nat.c:2514
msgid ""
"When this mode is on, all low level exceptions are reported before being\n"
"reported by the kernel."
msgstr ""

#. If we haven't found it yet, ignore it.  It's
#. probably some new type we don't know about yet.
#: dbxread.c:175 mdebugread.c:3339
#, possible-c-format
msgid "unknown symbol type %s"
msgstr ""

#: dbxread.c:181
#, possible-c-format
msgid "N_LBRAC/N_RBRAC symbol mismatch at symtab pos %d"
msgstr ""

#: dbxread.c:187
#, possible-c-format
msgid "\"repeated\" header file %s not previously seen, at symtab pos %d"
msgstr ""

#: dbxread.c:232
msgid "Can't find any code sections in symbol file"
msgstr ""

#: dbxread.c:609
msgid "Can't find .text section in symbol file"
msgstr ""

#: dbxread.c:671
#, possible-c-format
msgid "ridiculous string table size (%d bytes)."
msgstr ""

#: dbxread.c:798
msgid "Premature end of file reading symbol table"
msgstr ""

#: dbxread.c:885
#, possible-c-format
msgid "bad string table offset in symbol %d"
msgstr ""

#: dbxread.c:943 mdebugread.c:2225 xcoffread.c:2161
#, possible-c-format
msgid "function `%s' appears to be defined outside of all compilation units"
msgstr ""

#: dbxread.c:1181
#, possible-c-format
msgid "string table offset backs up at %d"
msgstr ""

#. FIXME: we should not get here without a PST to work on.
#. Attempt to recover.
#: dbxread.c:1326
#, possible-c-format
msgid "N_BINCL %s not in entries for any file, at symtab pos %d"
msgstr ""

#. Unexpected symbol descriptor.  The second and subsequent stabs
#. of a continued stab can show up here.  The question is
#. whether they ever can mimic a normal stab--it would be
#. nice if not, since we certainly don't want to spend the
#. time searching to the end of every string looking for
#. a backslash.
#. Unexpected symbol descriptor.  The second and
#. subsequent stabs of a continued stab can show up
#. here.  The question is whether they ever can
#. mimic a normal stab--it would be nice if not,
#. since we certainly don't want to spend the time
#. searching to the end of every string looking for
#. a backslash.
#. Unexpected symbol descriptor.  The second and
#. subsequent stabs of a continued stab can show up
#. here.  The question is whether they ever can mimic
#. a normal stab--it would be nice if not, since we
#. certainly don't want to spend the time searching to
#. the end of every string looking for a
#. backslash.
#: dbxread.c:1751 mdebugread.c:3275 xcoffread.c:2868
#, possible-c-format
msgid "unknown symbol descriptor `%c'"
msgstr ""

#: dbxread.c:2245
msgid "First symbol in segment of executable not a source symbol"
msgstr ""

#. GCC development snapshots from March to December of
#. 2000 would output N_LSYM entries after N_LBRAC
#. entries.  As a consequence, these symbols are simply
#. discarded.  Complain if this is the case.
#: dbxread.c:2517
msgid ""
"misplaced N_LBRAC entry; discarding local symbols which have no enclosing "
"block"
msgstr ""

#: dbxread.c:2537
msgid "block start larger than block end"
msgstr ""

#: dbxread.c:2720 exec.c:521 exec.c:787 gdbsupport/print-utils.c:77
#: gdbsupport/print-utils.c:120 gdbsupport/print-utils.c:288 mdebugread.c:3597
#: printcmd.c:1013 printcmd.c:2706 psymtab.c:695 psymtab.c:708 target.c:647
#: ui-out.c:782 utils.c:1583 valprint.c:1367
msgid "failed internal consistency check"
msgstr ""

#: dbxread.c:2810
#, possible-c-format
msgid "unmatched N_LBRAC before symtab pos %d"
msgstr ""

#: dbxread.c:2956 dbxread.c:3049 dbxread.c:3143
#, possible-c-format
msgid "ridiculous string table size: %d bytes"
msgstr ""

#: dbxread.c:3122
#, possible-c-format
msgid "stabsect_build_psymtabs:  Found stabs (%s), but not string section (%s)"
msgstr ""

#: dbxread.c:3130
#, possible-c-format
msgid "Can't find %s section in symbol file"
msgstr ""

#: dcache.c:135
#, possible-c-format
msgid "Deprecated remotecache flag is %s.\n"
msgstr ""

#: dcache.c:549 dcache.c:614
msgid "No data cache available.\n"
msgstr ""

#: dcache.c:564
msgid "No such cache line exists.\n"
msgstr ""

#: dcache.c:570 dcache.c:630
#, possible-c-format
msgid "Line %d: address %s [%d hits]\n"
msgstr ""

#: dcache.c:599
msgid "Usage: info dcache [LINENUMBER]\n"
msgstr ""

#: dcache.c:607
#, possible-c-format
msgid "Dcache %u lines of %u bytes each.\n"
msgstr ""

#: dcache.c:618
#, possible-c-format
msgid "Contains data for %s\n"
msgstr ""

#: dcache.c:638
#, possible-c-format
msgid "Cache state: %d active lines, %d hits\n"
msgstr ""

#: dcache.c:654
msgid "Dcache size must be greater than 0."
msgstr ""

#: dcache.c:668
#, possible-c-format
msgid "Invalid dcache line size: %u (must be power of 2)."
msgstr ""

#: dcache.c:691
msgid "Set cache use for remote targets."
msgstr ""

#: dcache.c:692
msgid "Show cache use for remote targets."
msgstr ""

#: dcache.c:693
msgid ""
"This used to enable the data cache for remote targets.  The cache\n"
"functionality is now controlled by the memory region system and the\n"
"\"stack-cache\" flag; \"remotecache\" now does nothing and\n"
"exists only for compatibility reasons."
msgstr ""

#: dcache.c:703
msgid ""
"Print information on the dcache performance.\n"
"Usage: info dcache [LINENUMBER]\n"
"With no arguments, this command prints the cache configuration and a\n"
"summary of each line in the cache.  With an argument, dump\"\n"
"the contents of the given line."
msgstr ""

#: dcache.c:710
msgid "Use this command to set number of lines in dcache and line-size."
msgstr ""

#. allow_unknown
#: dcache.c:713
msgid "Show dcachesettings."
msgstr ""

#: dcache.c:718
msgid "Set dcache line size in bytes (must be power of 2)."
msgstr ""

#: dcache.c:719
msgid "Show dcache line size."
msgstr ""

#: dcache.c:726
msgid "Set number of dcache lines."
msgstr ""

#: dcache.c:727
msgid "Show number of dcache lines."
msgstr ""

#: dicos-tdep.c:82 dicos-tdep.c:96
#, possible-c-format
msgid "Can't read elf symbols from %s: %s"
msgstr ""

#: dictionary.c:526
msgid "dict_add_symbol: non-expandable dictionary"
msgstr ""

#: dictionary.c:1091
msgid ""
"create_new_language_dictionary: attempted to expand non-expandable "
"multidictionary"
msgstr ""

#: disasm.c:676
msgid "--- no source info for this pc ---\n"
msgstr ""

#: disasm.c:948
msgid "'set disassembler-options ...' is not supported on this architecture.\n"
msgstr ""

#: disasm.c:985
#, possible-c-format
msgid "Invalid disassembler option value: '%s'.\n"
msgstr ""

#: disasm.c:1015
#, possible-c-format
msgid ""
"The current disassembler options are '%s'\n"
"\n"
msgstr ""

#: disasm.c:1022
msgid "There are no disassembler options available for this architecture.\n"
msgstr ""

#: disasm.c:1030
msgid ""
"The following disassembler options are supported for use with the\n"
"'set disassembler-options OPTION [,OPTION]...' command:\n"
msgstr ""

#: disasm.c:1091
#, possible-c-format
msgid ""
"\n"
"  For the options above, the following values are supported for \"%s\":\n"
"   "
msgstr ""

#: disasm.c:1138
msgid ""
"Set the disassembler options.\n"
"Usage: set disassembler-options OPTION [,OPTION]...\n"
"\n"
"See: 'show disassembler-options' for valid option values."
msgstr ""

#: disasm.c:1141
msgid "Show the disassembler options."
msgstr ""

#: dtrace-probe.c:609
#, possible-c-format
msgid "skipping section '%s' which does not contain valid DOF data."
msgstr ""

#: dtrace-probe.c:660 stap-probe.c:193
#, possible-c-format
msgid ""
"Probe '%s' has %d arguments, but GDB is requesting\n"
"argument %u.  This should not happen.  Please\n"
"report this bug."
msgstr ""

#: dtrace-probe.c:780 dtrace-probe.c:804 linux-thread-db.c:1954
msgid "No inferior running"
msgstr ""

#: dtrace-probe.c:813
#, possible-c-format
msgid "Probe %s:%s cannot be disabled: no enablers."
msgstr ""

#: dtrace-probe.c:862
#, possible-c-format
msgid "could not obtain the contents ofsection '%s' in objfile `%s'."
msgstr ""

#: dtrace-probe.c:887
msgid "Enabled"
msgstr ""

#: dtrace-probe.c:906
msgid ""
"Show information about DTrace static probes.\n"
"Usage: info probes dtrace [PROVIDER [NAME [OBJECT]]]\n"
"Each argument is a regular expression, used to select probes.\n"
"PROVIDER matches probe provider names.\n"
"NAME matches the probe names.\n"
"OBJECT matches the executable or shared library name."
msgstr ""

#: dummy-frame.c:429
msgid "maintenance print dummy-frames"
msgstr ""

#: dummy-frame.c:438
msgid "Print the contents of the internal dummy-frame stack."
msgstr ""

#: dwarf-index-cache.c:131
msgid "The index cache directory name is empty, skipping store."
msgstr ""

#: dwarf-index-cache.c:140
#, possible-c-format
msgid "index cache: could not make cache directory: %s"
msgstr ""

#: dwarf-index-cache.c:189
msgid "The index cache directory name is empty, skipping cache lookup."
msgstr ""

#: dwarf-index-cache.c:253
msgid "Missing arguments.  See \"help set index-cache\" for help.\n"
msgstr ""

#: dwarf-index-cache.c:274
#, possible-c-format
msgid "The index cache is currently %s.\n"
msgstr ""

#: dwarf-index-cache.c:275
msgid "enabled"
msgstr ""

#: dwarf-index-cache.c:322
#, possible-c-format
msgid "%s  Cache hits (this session): %u\n"
msgstr ""

#: dwarf-index-cache.c:324
#, possible-c-format
msgid "%sCache misses (this session): %u\n"
msgstr ""

#: dwarf-index-cache.c:339
msgid "Couldn't determine a path for the index cache directory."
msgstr ""

#: dwarf-index-cache.c:343
msgid "Set index-cache options."
msgstr ""

#: dwarf-index-cache.c:348
msgid "Show index-cache options."
msgstr ""

#: dwarf-index-cache.c:353
msgid "Enable the index cache."
msgstr ""

#: dwarf-index-cache.c:357
msgid "Disable the index cache."
msgstr ""

#: dwarf-index-cache.c:361
msgid "Set the directory of the index cache."
msgstr ""

#: dwarf-index-cache.c:362
msgid "Show the directory of the index cache."
msgstr ""

#: dwarf-index-cache.c:370
msgid "Show some stats about the index cache."
msgstr ""

#: dwarf-index-cache.c:376
msgid "Set display of index-cache debug messages."
msgstr ""

#: dwarf-index-cache.c:377
msgid "Show display of index-cache debug messages."
msgstr ""

#: dwarf-index-cache.c:378
msgid "When non-zero, debugging output for the index cache is displayed."
msgstr ""

#: dwarf-index-write.c:78
msgid "couldn't data write to file"
msgstr ""

#: dwarf-index-write.c:547
msgid ""
"Ada is not currently supported by the index; use the DWARF 5 index instead"
msgstr ""

#: dwarf-index-write.c:975
#, possible-c-format
msgid "Duplicate string \"%s\" in .debug_str section [in module %s]"
msgstr ""

#: dwarf-index-write.c:1641
#, possible-c-format
msgid "Can't open `%s' for writing"
msgstr ""

#: dwarf-index-write.c:1680
msgid "Cannot use an index to create the index"
msgstr ""

#: dwarf-index-write.c:1683
msgid "Cannot make an index when the file has multiple .debug_types sections"
msgstr ""

#: dwarf-index-write.c:1746
msgid "usage: save gdb-index [-dwarf-5] DIRECTORY"
msgstr ""

#: dwarf-index-write.c:1776
#, possible-c-format
msgid "Error while writing index for `%s': "
msgstr ""

#: dwarf-index-write.c:1788
msgid ""
"Save a gdb-index file.\n"
"Usage: save gdb-index [-dwarf-5] DIRECTORY\n"
"\n"
"No options create one file with .gdb-index extension for pre-DWARF-5\n"
"compatible .gdb_index section.  With -dwarf-5 creates two files with\n"
"extension .debug_names and .debug_str for DWARF-5 .debug_names section."
msgstr ""

#: dwarf2-frame.c:224
#, possible-c-format
msgid ""
"incomplete CFI data; DW_CFA_restore unspecified\n"
"register %s (#%d) at %s"
msgstr ""

#: dwarf2-frame.c:302 dwarf2expr.h:212
#, possible-c-format
msgid "%s is invalid in this context"
msgstr ""

#. This is actually invalid DWARF, but if we ever do run across
#. it somehow, we might as well support it.  So, instead, report
#. it as unimplemented.
#: dwarf2-frame.c:334
msgid ""
"Not implemented: computing unwound register using explicit value operator"
msgstr ""

#: dwarf2-frame.c:462
#, possible-c-format
msgid "bad CFI data; mismatched DW_CFA_restore_state at %s"
msgstr ""

#: dwarf2-frame.c:595
#, possible-c-format
msgid ""
"Call Frame Instruction op %d in vendor extension space is not handled on "
"this architecture."
msgstr ""

#: dwarf2-frame.c:601
msgid "Unknown CFI encountered."
msgstr ""

#: dwarf2-frame.c:886
msgid "Could not compute CFA; needed to translate this expression"
msgstr ""

#: dwarf2-frame.c:925 dwarf2-frame.c:1076
msgid "Unknown CFA rule."
msgstr ""

#: dwarf2-frame.c:1128
#, possible-c-format
msgid "incomplete CFI data; unspecified registers (e.g., %s) at %s"
msgstr ""

#: dwarf2-frame.c:1324
msgid "Unknown register rule."
msgstr ""

#: dwarf2-frame.c:1457
msgid "cfa not available for record btrace target"
msgstr ""

#: dwarf2-frame.c:1463
msgid ""
"can't compute CFA for this frame: required registers or memory are "
"unavailable"
msgstr ""

#: dwarf2-frame.c:1468
msgid "can't compute CFA for this frame: frame base not available"
msgstr ""

#: dwarf2-frame.c:1543
msgid "Unsupported address size"
msgstr ""

#: dwarf2-frame.c:1560
msgid "Unsupported encoding: DW_EH_PE_indirect"
msgstr ""

#: dwarf2-frame.c:1593 dwarf2-frame.c:1641
msgid "Invalid or unsupported encoding"
msgstr ""

#: dwarf2-frame.c:1806
msgid "Found a CIE when not expecting it."
msgstr ""

#: dwarf2-frame.c:1978
msgid "Found an FDE when not expecting it."
msgstr ""

#: dwarf2-frame.c:2119
#, possible-c-format
msgid "Corrupt data in %s:%s; align 4 workaround apparently succeeded"
msgstr ""

#: dwarf2-frame.c:2126
#, possible-c-format
msgid "Corrupt data in %s:%s; align 8 workaround apparently succeeded"
msgstr ""

#: dwarf2-frame.c:2133
#, possible-c-format
msgid "Corrupt data in %s:%s"
msgstr ""

#: dwarf2-frame.c:2216
#, possible-c-format
msgid "skipping .eh_frame info of %s: %s"
msgstr ""

#: dwarf2-frame.c:2250
#, possible-c-format
msgid "skipping .debug_frame info of %s: %s"
msgstr ""

#: dwarf2-frame.c:2354
#, possible-c-format
msgid "The DWARF stack unwinders are currently %s.\n"
msgstr ""

#: dwarf2-frame.c:2364
msgid "Set whether the DWARF stack frame unwinders are used."
msgstr ""

#: dwarf2-frame.c:2365
msgid "Show whether the DWARF stack frame unwinders are used."
msgstr ""

#: dwarf2-frame.c:2366
msgid ""
"When enabled the DWARF stack frame unwinders can be used for architectures\n"
"that support the DWARF unwinders.  Enabling the DWARF unwinders for an\n"
"architecture that doesn't support them will have no effect."
msgstr ""

#: dwarf2expr.c:77
#, possible-c-format
msgid "Unsupported address size in DWARF expressions: %d bits"
msgstr ""

#: dwarf2expr.c:127
msgid "dwarf expression stack underflow"
msgstr ""

#: dwarf2expr.c:138 dwarf2expr.c:238
#, possible-c-format
msgid "Asked for position %d of stack, stack only has %zu elements on it."
msgstr ""

#: dwarf2expr.c:152
msgid "integral type expected in DWARF expression"
msgstr ""

#: dwarf2expr.c:172
msgid "no unsigned variant found for type, while evaluating DWARF expression"
msgstr ""

#: dwarf2expr.c:194
msgid "no signed variant found for type, while evaluating DWARF expression"
msgstr ""

#: dwarf2expr.c:317
msgid "DWARF expression error: ran off end of buffer reading uleb128 value"
msgstr ""

#: dwarf2expr.c:329
msgid "DWARF expression error: ran off end of buffer reading sleb128 value"
msgstr ""

#: dwarf2expr.c:338
msgid "DWARF expression error: ran off end of buffer reading leb128 value"
msgstr ""

#: dwarf2expr.c:353
#, possible-c-format
msgid ""
"DWARF-2 expression error: `%s' operations must be used either alone or in "
"conjunction with DW_OP_piece or DW_OP_bit_piece."
msgstr ""

#: dwarf2expr.c:564
#, possible-c-format
msgid "DWARF-2 expression error: Loop detected (%d)."
msgstr ""

#: dwarf2expr.c:758 dwarf2loc.c:3042
msgid "DW_OP_implicit_value: too few bytes available."
msgstr ""

#: dwarf2expr.c:779
msgid ""
"DWARF-2 expression error: DW_OP_implicit_pointer is not allowed in frame "
"context"
msgstr ""

#: dwarf2expr.c:870
msgid "Not implemented: computing frame base using explicit value operator"
msgstr ""

#: dwarf2expr.c:901
#, possible-c-format
msgid "Not enough elements for DW_OP_swap.  Need 2, have %zu."
msgstr ""

#: dwarf2expr.c:919
#, possible-c-format
msgid "Not enough elements for DW_OP_rot.  Need 3, have %zu."
msgstr ""

#: dwarf2expr.c:1031
msgid "Incompatible types on DWARF stack"
msgstr ""

#: dwarf2expr.c:1154
msgid "Can't be reached."
msgstr ""

#: dwarf2expr.c:1241
msgid ""
"DWARF-2 expression error: DW_OP_GNU_uninit must always be the very last op."
msgstr ""

#: dwarf2expr.c:1285
msgid "DW_OP_entry_value: too few bytes available."
msgstr ""

#: dwarf2expr.c:1310
msgid ""
"DWARF-2 expression error: DW_OP_entry_value is supported only for single "
"DW_OP_reg* or for DW_OP_breg*(0)+DW_OP_deref*"
msgstr ""

#: dwarf2expr.c:1387
msgid "DW_OP_reinterpret has wrong size"
msgstr ""

#: dwarf2expr.c:1402
#, possible-c-format
msgid "Unhandled dwarf expression opcode 0x%x"
msgstr ""

#: dwarf2loc.c:107
msgid "access outside bounds of object referenced via synthetic pointer"
msgstr ""

#: dwarf2loc.c:324
msgid "dwarf2_find_location_expression: Corrupted DWARF expression."
msgstr ""

#: dwarf2loc.c:526
#, possible-c-format
msgid "Could not find the frame base for \"%s\"."
msgstr ""

#: dwarf2loc.c:565
msgid "Bad DW_OP_GNU_variable_value DIE."
msgstr ""

#: dwarf2loc.c:571
msgid "Type of DW_OP_GNU_variable_value DIE must be an integer or pointer."
msgstr ""

#: dwarf2loc.c:631
msgid "Could not find type for DW_OP_const_type"
msgstr ""

#: dwarf2loc.c:633
msgid "DW_OP_const_type has different sizes for type and data"
msgstr ""

#: dwarf2loc.c:651
msgid "Location address is not set."
msgstr ""

#: dwarf2loc.c:683 dwarf2loc.c:1367
msgid "Cannot resolve DW_AT_call_data_value"
msgstr ""

#: dwarf2loc.c:715
msgid "frame address is not available."
msgstr ""

#: dwarf2loc.c:771
#, possible-c-format
msgid "Entry values and tail call frames debugging is %s.\n"
msgstr ""

#: dwarf2loc.c:800
#, possible-c-format
msgid "DW_AT_call_target is not specified at %s in %s"
msgstr ""

#: dwarf2loc.c:812
#, possible-c-format
msgid ""
"DW_AT_call_target DWARF block resolving requires known frame which is "
"currently not available at %s in %s"
msgstr ""

#: dwarf2loc.c:845
#, possible-c-format
msgid "Cannot find function \"%s\" for a call site target at %s in %s"
msgstr ""

#: dwarf2loc.c:859
msgid "invalid call site target kind"
msgstr ""

#: dwarf2loc.c:875
#, possible-c-format
msgid "DW_TAG_call_site resolving failed to find function name for address %s"
msgstr ""

#: dwarf2loc.c:933
#, possible-c-format
msgid ""
"DW_OP_entry_value resolving has found function \"%s\" at %s can call itself "
"via tail calls"
msgstr ""

#: dwarf2loc.c:1085
#, possible-c-format
msgid "Unable to find function for PC %s"
msgstr ""

#: dwarf2loc.c:1172
#, possible-c-format
msgid ""
"There are no unambiguously determinable intermediate callers or callees "
"between caller function \"%s\" at %s and callee function \"%s\" at %s"
msgstr ""

#: dwarf2loc.c:1274
#, possible-c-format
msgid ""
"DW_OP_entry_value resolving callee gdbarch %s (of %s (%s)) does not match "
"caller gdbarch %s"
msgstr ""

#: dwarf2loc.c:1288
#, possible-c-format
msgid "DW_OP_entry_value resolving requires caller of %s (%s)"
msgstr ""

#: dwarf2loc.c:1305
#, possible-c-format
msgid ""
"DW_OP_entry_value resolving expects callee %s at %s but the called frame is "
"for %s at %s"
msgstr ""

#. DW_TAG_call_site_parameter will be missing just if GCC could not
#. determine its value.
#: dwarf2loc.c:1331
#, possible-c-format
msgid "Cannot find matching parameter at DW_TAG_call_site %s at %s"
msgstr ""

#: dwarf2loc.c:1510
msgid ""
"DWARF-2 expression error: DW_OP_entry_value is supported only for single "
"DW_OP_reg* or for DW_OP_fbreg(*)"
msgstr ""

#: dwarf2loc.c:1591
msgid "Should not be able to create a lazy value with an enclosing type"
msgstr ""

#: dwarf2loc.c:1685
msgid ""
"Can't do read-modify-write to update bitfield; containing word has been "
"optimized out"
msgstr ""

#: dwarf2loc.c:1690
msgid ""
"Can't do read-modify-write to update bitfield; containing word is unavailable"
msgstr ""

#: dwarf2loc.c:1844 dwarf2loc.c:2330
msgid "invalid location type"
msgstr ""

#: dwarf2loc.c:2025
msgid "Invalid use of DW_OP_implicit_pointer"
msgstr ""

#: dwarf2loc.c:2221
msgid "cannot use offset on synthetic pointer to register"
msgstr ""

#: dwarf2loc.c:2524
msgid "cannot find reference address for offset property"
msgstr ""

#: dwarf2loc.c:2732
#, possible-c-format
msgid "DWARF operator %s cannot be translated to an agent expression"
msgstr ""

#: dwarf2loc.c:2735
#, possible-c-format
msgid ""
"Unknown DWARF operator 0x%02x cannot be translated to an agent expression"
msgstr ""

#: dwarf2loc.c:2753
#, possible-c-format
msgid "bad DWARF register number %d"
msgstr ""

#: dwarf2loc.c:2768
#, possible-c-format
msgid "Unable to access DWARF register number %d"
msgstr ""

#: dwarf2loc.c:2769
#, possible-c-format
msgid "Unable to access DWARF register number %s"
msgstr ""

#: dwarf2loc.c:3044
#, possible-c-format
msgid "Cannot translate DW_OP_implicit_value of %d bytes"
msgstr ""

#: dwarf2loc.c:3407
msgid "Cannot translate empty pieces to agent expressions"
msgstr ""

#: dwarf2loc.c:3420
msgid "Expression pieces exceed word size"
msgstr ""

#: dwarf2loc.c:3509
msgid "invalid label"
msgstr ""

#. The text is output as "$bad_register_number".
#. That is why we use the underscores.
#: dwarf2loc.c:3583
msgid "bad_register_number"
msgstr ""

#: dwarf2loc.c:3606 dwarf2loc.c:3615
#, possible-c-format
msgid "a variable in $%s"
msgstr ""

#: dwarf2loc.c:3636
#, possible-c-format
msgid "No block found for address for symbol \"%s\"."
msgstr ""

#: dwarf2loc.c:3642
#, possible-c-format
msgid "No function found for block for symbol \"%s\"."
msgstr ""

#: dwarf2loc.c:3655
#, possible-c-format
msgid "Unexpected opcode after DW_OP_breg%u for symbol \"%s\"."
msgstr ""

#: dwarf2loc.c:3673
#, possible-c-format
msgid "a variable at frame base reg $%s offset %s+%s"
msgstr ""

#: dwarf2loc.c:3685
#, possible-c-format
msgid "a variable at offset %s from base reg $%s"
msgstr ""

#: dwarf2loc.c:3717 dwarf2loc.c:3741
#, possible-c-format
msgid ""
"a thread-local variable at offset 0x%s in the thread-local storage for `%s'"
msgstr ""

#: dwarf2loc.c:3752
#, possible-c-format
msgid "the constant %d"
msgstr ""

#: dwarf2loc.c:3786
#, possible-c-format
msgid "Unrecognized DWARF opcode 0x%02x at %ld"
msgstr ""

#: dwarf2loc.c:4161
msgid ", and "
msgstr ""

#: dwarf2loc.c:4177
msgid "a complex DWARF expression:\n"
msgstr ""

#: dwarf2loc.c:4199
#, possible-c-format
msgid "an empty %s-byte piece"
msgstr ""

#: dwarf2loc.c:4202
#, possible-c-format
msgid " [%s-byte piece]"
msgstr ""

#: dwarf2loc.c:4214
#, possible-c-format
msgid "an empty %s-bit piece"
msgstr ""

#: dwarf2loc.c:4218
#, possible-c-format
msgid " [%s-bit piece, offset %s bits]"
msgstr ""

#: dwarf2loc.c:4230
#, possible-c-format
msgid "Corrupted DWARF2 expression for \"%s\"."
msgstr ""

#: dwarf2loc.c:4284 dwarf2loc.c:4497
#, possible-c-format
msgid "symbol \"%s\" is optimized out"
msgstr ""

#: dwarf2loc.c:4394
msgid "multi-location:\n"
msgstr ""

#: dwarf2loc.c:4421
#, possible-c-format
msgid "  Base address %s"
msgstr ""

#: dwarf2loc.c:4429
#, possible-c-format
msgid "Corrupted DWARF expression for symbol \"%s\"."
msgstr ""

#. (It would improve readability to print only the minimum
#. necessary digits of the second number of the range.)
#: dwarf2loc.c:4447
#, possible-c-format
msgid "  Range %s-%s: "
msgstr ""

#: dwarf2loc.c:4522
msgid "Set entry values and tail call frames debugging."
msgstr ""

#: dwarf2loc.c:4524
msgid "Show entry values and tail call frames debugging."
msgstr ""

#: dwarf2loc.c:4526
msgid ""
"When non-zero, the process of determining parameter values from function "
"entry point and tail call frames will be printed."
msgstr ""

#: dwarf2read.c:1439
#, possible-c-format
msgid "The upper bound on the age of cached DWARF compilation units is %s.\n"
msgstr ""

#: dwarf2read.c:2033
msgid "statement list doesn't fit in .debug_line section"
msgstr ""

#: dwarf2read.c:2039
msgid ".debug_line section has line data without a file"
msgstr ""

#: dwarf2read.c:2045
msgid ".debug_line section has line program sequence without an end"
msgstr ""

#: dwarf2read.c:2052
msgid "location expression too complex"
msgstr ""

#: dwarf2read.c:2059
#, possible-c-format
msgid "const value length mismatch for '%s', got %d, expected %d"
msgstr ""

#: dwarf2read.c:2066
#, possible-c-format
msgid "debug info runs off end of %s section [in module %s]"
msgstr ""

#: dwarf2read.c:2075
#, possible-c-format
msgid ""
"macro debug info contains a malformed macro definition:\n"
"`%s'"
msgstr ""

#: dwarf2read.c:2083
#, possible-c-format
msgid "invalid attribute class or form for '%s' in '%s'"
msgstr ""

#: dwarf2read.c:2370
#, possible-c-format
msgid ""
"Discarding section %s which has a section size (%s) larger than the file "
"size [in module %s]"
msgstr ""

#: dwarf2read.c:2515
#, possible-c-format
msgid ""
"Dwarf Error: DWP format V2 with relocations is not supported in section %s "
"[in module %s]"
msgstr ""

#: dwarf2read.c:2559
#, possible-c-format
msgid "Dwarf Error: Can't read DWARF data in section %s [in module %s]"
msgstr ""

#: dwarf2read.c:2688
#, possible-c-format
msgid "could not read '.gnu_debugaltlink' section: %s"
msgstr ""

#: dwarf2read.c:2721
#, possible-c-format
msgid "could not find '.gnu_debugaltlink' file for %s"
msgstr ""

#: dwarf2read.c:3196
#, possible-c-format
msgid ".gdb_index address table has invalid range (%s - %s)"
msgstr ""

#: dwarf2read.c:3203
#, possible-c-format
msgid ".gdb_index address table has invalid CU number %u"
msgstr ""

#: dwarf2read.c:3244
#, possible-c-format
msgid ""
"Section .debug_aranges in %s has duplicate debug_info_offset %s, ignoring ."
"debug_aranges."
msgstr ""

#: dwarf2read.c:3271
#, possible-c-format
msgid ""
"Section .debug_aranges in %s entry at offset %s length %s exceeds section "
"length %s, ignoring .debug_aranges."
msgstr ""

#: dwarf2read.c:3286
#, possible-c-format
msgid ""
"Section .debug_aranges in %s entry at offset %s has unsupported version %d, "
"ignoring .debug_aranges."
msgstr ""

#: dwarf2read.c:3300
#, possible-c-format
msgid ""
"Section .debug_aranges in %s entry at offset %s debug_info_offset %s does "
"not exists, ignoring .debug_aranges."
msgstr ""

#: dwarf2read.c:3313
#, possible-c-format
msgid ""
"Section .debug_aranges in %s entry at offset %s address_size %u is invalid, "
"ignoring .debug_aranges."
msgstr ""

#: dwarf2read.c:3323
#, possible-c-format
msgid ""
"Section .debug_aranges in %s entry at offset %s segment_selector_size %u is "
"not supported, ignoring .debug_aranges."
msgstr ""

#: dwarf2read.c:3340
#, possible-c-format
msgid ""
"Section .debug_aranges in %s entry at offset %s padding is not zero, "
"ignoring .debug_aranges."
msgstr ""

#: dwarf2read.c:3351
#, possible-c-format
msgid ""
"Section .debug_aranges in %s entry at offset %s address list is not properly "
"terminated, ignoring .debug_aranges."
msgstr ""

#: dwarf2read.c:3481
#, possible-c-format
msgid "Skipping obsolete .gdb_index section in %s."
msgstr ""

#: dwarf2read.c:3500
#, possible-c-format
msgid ""
"Skipping deprecated .gdb_index section in %s.\n"
"Do \"set use-deprecated-index-sections on\" before the file is read\n"
"to use the section anyway."
msgstr ""

#: dwarf2read.c:3620
#, possible-c-format
msgid "could not read '.gdb_index' section from %s; skipping"
msgstr ""

#: dwarf2read.c:3996 dwarf2read.c:5087
#, possible-c-format
msgid ".gdb_index entry has bad CU index [in module %s]"
msgstr ""

#: dwarf2read.c:4123
#, possible-c-format
msgid "  Number of read CUs: %d\n"
msgstr ""

#: dwarf2read.c:4124
#, possible-c-format
msgid "  Number of unread CUs: %d\n"
msgstr ""

#: dwarf2read.c:4625
#, possible-c-format
msgid "%s:%d: match_type=%s, looking-for=\"%s\", expected=\"%s\", got=\"%s\"\n"
msgstr ""

#: dwarf2read.c:5257
#, possible-c-format
msgid "(Internal error: pc %s in read in CU, but not in symtab.)"
msgstr ""

#. There may be multiple per-CU indices.
#: dwarf2read.c:5402
#, possible-c-format
msgid ""
"Section .debug_names in %s length %s does not match section length %s, "
"ignoring .debug_names."
msgstr ""

#: dwarf2read.c:5414
#, possible-c-format
msgid ""
"Section .debug_names in %s has unsupported version %d, ignoring .debug_names."
msgstr ""

#: dwarf2read.c:5425
#, possible-c-format
msgid ""
"Section .debug_names in %s has unsupported padding %d, ignoring .debug_names."
msgstr ""

#: dwarf2read.c:5446
#, possible-c-format
msgid ""
"Section .debug_names in %s has unsupported %lu foreign TUs, ignoring ."
"debug_names."
msgstr ""

#: dwarf2read.c:5509
#, possible-c-format
msgid ""
"Section .debug_names in %s has duplicate index %s, ignoring .debug_names."
msgstr ""

#: dwarf2read.c:5538
#, possible-c-format
msgid ""
"Section .debug_names in %s has abbreviation_table of size %s vs. written as "
"%u, ignoring .debug_names."
msgstr ""

#: dwarf2read.c:5636
#, possible-c-format
msgid "could not read '.debug_names' section from %s; skipping"
msgstr ""

#: dwarf2read.c:5772 dwarf2read.c:5824
#, possible-c-format
msgid "Wrong .debug_names with name index %u but name_count=%u [in module %s]"
msgstr ""

#: dwarf2read.c:5795
#, possible-c-format
msgid "Wrong .debug_names hash for string at index %u [in module %s]"
msgstr ""

#: dwarf2read.c:5861
#, possible-c-format
msgid "Wrong .debug_names undefined abbrev code %s [in module %s]"
msgstr ""

#: dwarf2read.c:5889
#, possible-c-format
msgid "Unsupported .debug_names form %s [in module %s]"
msgstr ""

#: dwarf2read.c:5900
#, possible-c-format
msgid ".debug_names entry has bad CU index %s [in module %s]"
msgstr ""

#: dwarf2read.c:5912
#, possible-c-format
msgid ".debug_names entry has bad TU index %s [in module %s]"
msgstr ""

#: dwarf2read.c:6463
#, possible-c-format
msgid ""
"Dwarf Error: wrong version in compilation unit header (is %d, should be 2, "
"3, 4 or 5) [in module %s]"
msgstr ""

#: dwarf2read.c:6478
msgid "read_comp_unit_head: invalid section_kind"
msgstr ""

#: dwarf2read.c:6492
#, possible-c-format
msgid ""
"Dwarf Error: wrong unit_type in compilation unit header (is %s, should be "
"%s) [in module %s]"
msgstr ""

#: dwarf2read.c:6502
#, possible-c-format
msgid ""
"Dwarf Error: wrong unit_type in compilation unit header (is %#04x, should be "
"one of: %s, %s, %s, %s or %s) [in module %s]"
msgstr ""

#: dwarf2read.c:6527
msgid "read_comp_unit_head: dwarf from non elf file"
msgstr ""

#: dwarf2read.c:6547
#, possible-c-format
msgid ""
"Dwarf Error: Too big type_offset in compilation unit header (is %s) [in "
"module %s]"
msgstr ""

#: dwarf2read.c:6586
#, possible-c-format
msgid ""
"Dwarf Error: bad offset (%s) in compilation unit header (offset %s + 6) [in "
"module %s]"
msgstr ""

#: dwarf2read.c:6596
#, possible-c-format
msgid ""
"Dwarf Error: bad length (0x%x) in compilation unit header (offset %s + 0) "
"[in module %s]"
msgstr ""

#: dwarf2read.c:6887
#, possible-c-format
msgid ""
"debug type entry at offset %s is duplicate to the entry at offset %s, "
"signature %s"
msgstr ""

#: dwarf2read.c:7322
#, possible-c-format
msgid ""
"Dwarf Error: signature mismatch %s vs %s while reading TU at offset %s [in "
"module %s]"
msgstr ""

#: dwarf2read.c:7457
#, possible-c-format
msgid "Dwarf Error: missing dwo_id for dwo_name %s [in module %s]"
msgstr ""

#: dwarf2read.c:7718
#, possible-c-format
msgid ""
"compilation unit with DW_AT_GNU_dwo_name has children (offset %s) [in module "
"%s]"
msgstr ""

#: dwarf2read.c:8774 dwarf2read.c:10598
#, possible-c-format
msgid ""
"Dwarf Error: DW_TAG_imported_unit is not supported in type units [in module "
"%s]"
msgstr ""

#. FIXME drow/2004-04-01: What should we be doing with
#. function-local names?  For partial symbols, we should probably be
#. ignoring them.
#: dwarf2read.c:8897
#, possible-c-format
msgid "unhandled containing DIE tag %s for DIE at %s"
msgstr ""

#: dwarf2read.c:9269 dwarf2read.c:18779
msgid "malformed enumerator DIE ignored"
msgstr ""

#: dwarf2read.c:9308
#, possible-c-format
msgid ""
"Dwarf Error: Could not find abbrev number %d in %s at offset %s [in module "
"%s]"
msgstr ""

#: dwarf2read.c:9361 dwarf2read.c:18999
msgid "ignoring absolute DW_AT_sibling"
msgstr ""

#: dwarf2read.c:9368 dwarf2read.c:19007
msgid "DW_AT_sibling points backwards"
msgstr ""

#: dwarf2read.c:9465 dwarf2read.c:19610
#, possible-c-format
msgid "Dwarf Error: Cannot handle %s in DWARF reader [in module %s]"
msgstr ""

#: dwarf2read.c:9520 mdebugread.c:282
#, possible-c-format
msgid "Reading in symbols for %s..."
msgstr ""

#: dwarf2read.c:9933
#, possible-c-format
msgid "Symtab %s has objects from two different Go packages: %s and %s"
msgstr ""

#: dwarf2read.c:10060
#, possible-c-format
msgid "Could not parse Rust enum encoding string \"%s\"[in module %s]"
msgstr ""

#: dwarf2read.c:10742
#, possible-c-format
msgid "Tag '%s' has unexpected children"
msgstr ""

#: dwarf2read.c:10976
msgid "template parameter missing DW_AT_type"
msgstr ""

#: dwarf2read.c:10992
msgid "template parameter missing DW_AT_const_value"
msgstr ""

#. It may not mean a bug in GDB.  The compiler could also
#. compute DW_AT_linkage_name incorrectly.  But in such case
#. GDB would need to be bug-to-bug compatible.
#: dwarf2read.c:11184
#, possible-c-format
msgid ""
"Computed physname <%s> does not match demangled <%s> (from linkage <%s>) - "
"DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:11245
#, possible-c-format
msgid "DIE at %s has too many recursively imported declarations"
msgstr ""

#: dwarf2read.c:11308 dwarf2read.c:11398
#, possible-c-format
msgid "Tag '%s' has no DW_AT_import"
msgstr ""

#: dwarf2read.c:11388
#, possible-c-format
msgid "child DW_TAG_imported_declaration expected - DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:11409
#, possible-c-format
msgid ""
"child DW_TAG_imported_declaration has unknown imported name - DIE at %s [in "
"module %s]"
msgstr ""

#: dwarf2read.c:11674
msgid "CU refers to both DW_AT_macros and DW_AT_macro_info"
msgstr ""

#: dwarf2read.c:11976
#, possible-c-format
msgid ""
"Dwarf Error: debug entry at offset %s is missing its dwo_id [in module %s]"
msgstr ""

#: dwarf2read.c:12056
#, possible-c-format
msgid ""
"debug cu entry at offset %s is duplicate to the entry at offset %s, "
"signature %s"
msgstr ""

#: dwarf2read.c:12239
#, possible-c-format
msgid "Dwarf Error: unsupported DWP file version (%s) [in module %s]"
msgstr ""

#: dwarf2read.c:12245
#, possible-c-format
msgid ""
"Dwarf Error: number of slots in DWP hash table (%s) is not power of 2 [in "
"module %s]"
msgstr ""

#: dwarf2read.c:12266
#, possible-c-format
msgid "Empty DWP but nr_slots,nr_units,nr_columns not all zero [in modules %s]"
msgstr ""

#: dwarf2read.c:12291
#, possible-c-format
msgid ""
"Dwarf Error: bad DWP hash table, too few columns in section table [in module "
"%s]"
msgstr ""

#: dwarf2read.c:12297
#, possible-c-format
msgid ""
"Dwarf Error: bad DWP hash table, too many columns in section table [in "
"module %s]"
msgstr ""

#: dwarf2read.c:12309
#, possible-c-format
msgid ""
"Dwarf Error: bad DWP hash table, bad section id %d in section table [in "
"module %s]"
msgstr ""

#: dwarf2read.c:12315
#, possible-c-format
msgid ""
"Dwarf Error: bad DWP hash table, duplicate section id %d in section table "
"[in module %s]"
msgstr ""

#: dwarf2read.c:12327
#, possible-c-format
msgid ""
"Dwarf Error: bad DWP hash table, missing/duplicate DWO info/types section "
"[in module %s]"
msgstr ""

#: dwarf2read.c:12334
#, possible-c-format
msgid ""
"Dwarf Error: bad DWP hash table, missing DWO abbrev section [in module %s]"
msgstr ""

#: dwarf2read.c:12346
#, possible-c-format
msgid "Dwarf Error: DWP index section is corrupt (too small) [in module %s]"
msgstr ""

#: dwarf2read.c:12495
#, possible-c-format
msgid ""
"Dwarf Error: bad DWP hash table, section number too large [in module %s]"
msgstr ""

#: dwarf2read.c:12503
#, possible-c-format
msgid "Dwarf Error: bad DWP hash table, invalid section found [in module %s]"
msgstr ""

#: dwarf2read.c:12513
#, possible-c-format
msgid "Dwarf Error: bad DWP hash table, missing DWO sections [in module %s]"
msgstr ""

#: dwarf2read.c:12519
#, possible-c-format
msgid "Dwarf Error: bad DWP hash table, too many DWO sections [in module %s]"
msgstr ""

#: dwarf2read.c:12624
#, possible-c-format
msgid ""
"Dwarf Error: Bad DWP V2 section info, doesn't fit in section %s [in module "
"%s]"
msgstr ""

#: dwarf2read.c:12870
#, possible-c-format
msgid "Dwarf Error: bad DWP hash table, lookup didn't terminate [in module %s]"
msgstr ""

#. Technically speaking, we should try to limp along, but this is
#. pretty bizarre.  We use pulongest here because that's the established
#. portability solution (e.g, we cannot use %u for uint32_t).
#: dwarf2read.c:13321
#, possible-c-format
msgid ""
"Dwarf Error: DWP file CU version %s doesn't match TU version %s [in DWP file "
"%s]"
msgstr ""

#: dwarf2read.c:13497
#, possible-c-format
msgid ""
"Could not find DWO %s %s(%s)%s referenced by %s at offset %s [in module %s]"
msgstr ""

#: dwarf2read.c:13615
#, possible-c-format
msgid "DIE %s and its abstract origin %s have different tags"
msgstr ""

#: dwarf2read.c:13661
#, possible-c-format
msgid "Child DIE %s and its abstract origin %s have different tags"
msgstr ""

#: dwarf2read.c:13666
#, possible-c-format
msgid "Child DIE %s and its abstract origin %s have different parents"
msgstr ""

#: dwarf2read.c:13678
#, possible-c-format
msgid "Multiple children of DIE %s refer to DIE %s as their abstract origin"
msgstr ""

#: dwarf2read.c:13747
#, possible-c-format
msgid "missing name for subprogram DIE at %s"
msgstr ""

#: dwarf2read.c:13758
#, possible-c-format
msgid "cannot get low and high bounds for subprogram DIE at %s"
msgstr ""

#: dwarf2read.c:14003
#, possible-c-format
msgid "missing DW_AT_call_return_pc for DW_TAG_call_site DIE %s [in module %s]"
msgstr ""

#: dwarf2read.c:14019
#, possible-c-format
msgid "Duplicate PC %s for DW_TAG_call_site DIE %s [in module %s]"
msgstr ""

#: dwarf2read.c:14035
#, possible-c-format
msgid ""
"Tag %d is not DW_TAG_call_site_parameter in DW_TAG_call_site child DIE %s "
"[in module %s]"
msgstr ""

#: dwarf2read.c:14097
#, possible-c-format
msgid "Cannot find function owning DW_TAG_call_site DIE %s [in module %s]"
msgstr ""

#: dwarf2read.c:14143
#, possible-c-format
msgid ""
"DW_AT_call_target target DIE has invalid physname, for referencing DIE %s "
"[in module %s]"
msgstr ""

#: dwarf2read.c:14156
#, possible-c-format
msgid ""
"DW_AT_call_target target DIE has invalid low pc, for referencing DIE %s [in "
"module %s]"
msgstr ""

#: dwarf2read.c:14167
#, possible-c-format
msgid ""
"DW_TAG_call_site DW_AT_call_target is neither block nor reference, for DIE "
"%s [in module %s]"
msgstr ""

#. As DW_OP_GNU_parameter_ref uses CU-relative offset this
#. binding can be done only inside one CU.  Such referenced DIE
#. therefore cannot be even moved to DW_TAG_partial_unit.
#: dwarf2read.c:14213
#, possible-c-format
msgid ""
"DW_AT_call_parameter offset is not in CU for DW_TAG_call_site child DIE %s "
"[in module %s]"
msgstr ""

#: dwarf2read.c:14224
#, possible-c-format
msgid ""
"No DW_FORM_block* DW_AT_location for DW_TAG_call_site child DIE %s [in "
"module %s]"
msgstr ""

#: dwarf2read.c:14241
#, possible-c-format
msgid ""
"Only single DW_OP_reg or DW_OP_fbreg is supported for DW_FORM_block* "
"DW_AT_location is supported for DW_TAG_call_site child DIE %s [in module %s]"
msgstr ""

#: dwarf2read.c:14256
#, possible-c-format
msgid ""
"No DW_FORM_block* DW_AT_call_value for DW_TAG_call_site child DIE %s [in "
"module %s]"
msgstr ""

#: dwarf2read.c:14276
#, possible-c-format
msgid ""
"No DW_FORM_block* DW_AT_call_data_value for DW_TAG_call_site child DIE %s "
"[in module %s]"
msgstr ""

#: dwarf2read.c:14383 dwarf2read.c:14551
#, possible-c-format
msgid "Offset %d out of bounds for DW_AT_ranges attribute"
msgstr ""

#. We have no valid base address for the ranges
#. data.
#: dwarf2read.c:14464 dwarf2read.c:14476
msgid "Invalid .debug_rnglists data (no base address)"
msgstr ""

#. Inverted range entries are invalid.
#: dwarf2read.c:14483
msgid "Invalid .debug_rnglists data (inverted range)"
msgstr ""

#: dwarf2read.c:14499
#, possible-c-format
msgid ".debug_rnglists entry has start address of zero [in module %s]"
msgstr ""

#: dwarf2read.c:14509
#, possible-c-format
msgid "Offset %d is not terminated for DW_AT_ranges attribute"
msgstr ""

#. We have no valid base address for the ranges
#. data.
#: dwarf2read.c:14590
msgid "Invalid .debug_ranges data (no base address)"
msgstr ""

#. Inverted range entries are invalid.
#: dwarf2read.c:14597
msgid "Invalid .debug_ranges data (inverted range)"
msgstr ""

#: dwarf2read.c:14613
#, possible-c-format
msgid ".debug_ranges entry has start address of zero [in module %s]"
msgstr ""

#: dwarf2read.c:15330
#, possible-c-format
msgid "Unhandled DW_AT_accessibility value (%x)"
msgstr ""

#: dwarf2read.c:15427
#, possible-c-format
msgid "unsupported accessibility %d"
msgstr ""

#: dwarf2read.c:15439
msgid "unexpected virtuality in component of Ada type"
msgstr ""

#: dwarf2read.c:15491
msgid "unexpected member function in Ada type"
msgstr ""

#: dwarf2read.c:15556
#, possible-c-format
msgid "member function type missing for '%s'"
msgstr ""

#: dwarf2read.c:15628
#, possible-c-format
msgid "cannot determine context for virtual member function \"%s\" (offset %s)"
msgstr ""

#. GCC does this, as of 2008-08-25; PR debug/37237.
#: dwarf2read.c:15655
#, possible-c-format
msgid ""
"Member function \"%s\" (offset %s) is virtual but the vtable offset is not "
"specified"
msgstr ""

#: dwarf2read.c:15671
msgid "unexpected member functions in Ada type"
msgstr ""

#: dwarf2read.c:15768
#, possible-c-format
msgid "DW_AT_alignment must have constant form - DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:15781
#, possible-c-format
msgid "DW_AT_alignment value must not be negative - DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:15794
#, possible-c-format
msgid "DW_AT_alignment value must not be zero - DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:15802
#, possible-c-format
msgid "DW_AT_alignment value must be a power of 2 - DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:15820
#, possible-c-format
msgid "DW_AT_alignment value too large - DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:16030
#, possible-c-format
msgid "DW_AT_discr_list is not supported yet - DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:16084
#, possible-c-format
msgid "DW_AT_discr does not have DIE reference form - DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:16162
#, possible-c-format
msgid "virtual function table pointer not found when defining class '%s'"
msgstr ""

#: dwarf2read.c:16279
#, possible-c-format
msgid ""
"could not find suitable symtab for template parameter - DIE at %s [in module "
"%s]"
msgstr ""

#: dwarf2read.c:16571
#, possible-c-format
msgid "unable to read array DW_AT_byte_stride  - DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:16655
msgid "DW_AT_byte_size for array type smaller than the total size of elements"
msgstr ""

#. GDB has handled this for a long time, but it is
#. not specified by DWARF.  It seems to have been
#. emitted by gfortran at least as recently as:
#. http://gcc.gnu.org/bugzilla/show_bug.cgi?id=23057.
#: dwarf2read.c:16881
#, possible-c-format
msgid ""
"Variable in common block has DW_AT_data_member_location - DIE at %s [in "
"module %s]"
msgstr ""

#: dwarf2read.c:17115
#, possible-c-format
msgid "invalid pointer size %d"
msgstr ""

#: dwarf2read.c:17119
#, possible-c-format
msgid "Invalid DW_AT_alignment - DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:17343
msgid ""
"DW_AT_bit_size and DW_AT_string_length_bit_size not currently supported on "
"DW_TAG_string_type."
msgstr ""

#. Self-referential typedefs are, it seems, not allowed by the DWARF
#. spec and cause infinite loops in GDB.
#: dwarf2read.c:17613
#, possible-c-format
msgid "Self-referential DW_TAG_typedef - DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:17748
msgid "DW_AT_name missing from DW_TAG_base_type"
msgstr ""

#: dwarf2read.c:17767
#, possible-c-format
msgid "DW_AT_endianity has unrecognized value %d"
msgstr ""

#: dwarf2read.c:17829
#, possible-c-format
msgid "unsupported DW_ATE_UTF bit size: '%d'"
msgstr ""

#: dwarf2read.c:17838
#, possible-c-format
msgid "unsupported DW_AT_encoding: '%s'"
msgstr ""

#: dwarf2read.c:18105
#, possible-c-format
msgid "Missing DW_AT_lower_bound - DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:18126
#, possible-c-format
msgid "Unresolved DW_AT_upper_bound - DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:18131
#, possible-c-format
msgid "Unresolved DW_AT_count - DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:18177
#, possible-c-format
msgid "Found DW_AT_bit_stride and DW_AT_byte_stride - DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:18381
#, possible-c-format
msgid "Dwarf Error: could not find abbrev number %d [in module %s]"
msgstr ""

#: dwarf2read.c:18764
#, possible-c-format
msgid ""
"DW_TAG_typedef has childen - GCC PR debug/47510 bug - DIE at %s [in module "
"%s]"
msgstr ""

#: dwarf2read.c:19108
#, possible-c-format
msgid "DW_AT_low_pc %s is zero for DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:19120
#, possible-c-format
msgid "DW_AT_low_pc %s is not < DW_AT_high_pc %s for DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:19178
#, possible-c-format
msgid ""
"Dwarf Error: Type Unit at offset %s contains external reference to offset %s "
"[in module %s].\n"
msgstr ""

#: dwarf2read.c:19213
#, possible-c-format
msgid "could not find partial DIE %s in cache [from module %s]\n"
msgstr ""

#. For now flag a hard error.
#. Later we can turn this into a complaint.
#. For now flag a hard error.
#. Later we can turn this into a complaint if warranted.
#: dwarf2read.c:19557 dwarf2read.c:19574
#, possible-c-format
msgid "Dwarf Error: %s found in non-DWO CU [in module %s]"
msgstr ""

#: dwarf2read.c:19630
#, possible-c-format
msgid "Suspicious DW_AT_byte_size value treated as zero instead of %s"
msgstr ""

#: dwarf2read.c:19729
#, possible-c-format
msgid "read_address: bad switch, signed [in module %s]"
msgstr ""

#: dwarf2read.c:19748
#, possible-c-format
msgid "read_address: bad switch, unsigned [in module %s]"
msgstr ""

#: dwarf2read.c:19841
msgid "intermixed 32-bit and 64-bit DWARF sections"
msgstr ""

#: dwarf2read.c:19878
#, possible-c-format
msgid "read_offset_1: bad switch [in module %s]"
msgstr ""

#: dwarf2read.c:19924
#, possible-c-format
msgid "%s used without %s section [in module %s]"
msgstr ""

#: dwarf2read.c:19927
#, possible-c-format
msgid "%s pointing outside of %s section [in module %s]"
msgstr ""

#: dwarf2read.c:19972
#, possible-c-format
msgid "DW_FORM_GNU_strp_alt used without .debug_str section [in module %s]"
msgstr ""

#: dwarf2read.c:19976
#, possible-c-format
msgid ""
"DW_FORM_GNU_strp_alt pointing outside of .debug_str section [in module %s]"
msgstr ""

#: dwarf2read.c:20087
#, possible-c-format
msgid "DW_FORM_addr_index used without .debug_addr section [in module %s]"
msgstr ""

#: dwarf2read.c:20090
#, possible-c-format
msgid ""
"DW_FORM_addr_index pointing outside of .debug_addr section [in module %s]"
msgstr ""

#: dwarf2read.c:20221
#, possible-c-format
msgid ""
"%s used without .debug_str.dwo section in CU at offset %s [in module %s]"
msgstr ""

#: dwarf2read.c:20225
#, possible-c-format
msgid ""
"%s used without .debug_str_offsets.dwo section in CU at offset %s [in module "
"%s]"
msgstr ""

#: dwarf2read.c:20229
#, possible-c-format
msgid ""
"%s pointing outside of .debug_str_offsets.dwo section in CU at offset %s [in "
"module %s]"
msgstr ""

#: dwarf2read.c:20239
#, possible-c-format
msgid ""
"Offset from %s pointing outside of .debug_str.dwo section in CU at offset %s "
"[in module %s]"
msgstr ""

#: dwarf2read.c:20391
#, possible-c-format
msgid "string type expected for attribute %s for DIE at %s in module %s"
msgstr ""

#: dwarf2read.c:20651
#, possible-c-format
msgid "Unknown format content type %s"
msgstr ""

#: dwarf2read.c:20689
msgid "missing .debug_line.dwo section"
msgstr ""

#: dwarf2read.c:20691
msgid "missing .debug_line section"
msgstr ""

#. This is a version we don't understand.  The format could have
#. changed in ways we don't handle properly so just punt.
#: dwarf2read.c:20734
msgid "unsupported version in .debug_line section"
msgstr ""

#: dwarf2read.c:20749
#, possible-c-format
msgid "unsupported segment selector size %u in .debug_line section"
msgstr ""

#: dwarf2read.c:20771
msgid "invalid maximum_ops_per_instruction in `.debug_line' section"
msgstr ""

#: dwarf2read.c:20844
msgid "line number info header doesn't fit in `.debug_line' section"
msgstr ""

#: dwarf2read.c:21309
#, possible-c-format
msgid ".debug_line address at offset 0x%lx is 0 [in module %s]"
msgstr ""

#: dwarf2read.c:21436 dwarf2read.c:21444
msgid "mangled .debug_line section"
msgstr ""

#: dwarf2read.c:21827
msgid "file index out of range"
msgstr ""

#. Not a tag we recognize.  Hopefully we aren't processing
#. trash data, but since we must specifically ignore things
#. we don't recognize, there is nothing else we should do at
#. this point.
#: dwarf2read.c:22129
#, possible-c-format
msgid "unsupported tag: '%s'"
msgstr ""

#: dwarf2read.c:22289 dwarf2read.c:23797
#, possible-c-format
msgid "unsupported const value attribute form: '%s'"
msgstr ""

#: dwarf2read.c:22403
#, possible-c-format
msgid ""
"Dwarf Error: Problem turning containing type into gdb type [in module %s]"
msgstr ""

#: dwarf2read.c:22420
#, possible-c-format
msgid "<unknown type in %s, CU %s, DIE %s>"
msgstr ""

#: dwarf2read.c:22472
#, possible-c-format
msgid "Dwarf Error: Bad type attribute %s in DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:22600
#, possible-c-format
msgid "unexpected tag in read_type_die: '%s'"
msgstr ""

#: dwarf2read.c:22814
#, possible-c-format
msgid "template param type '%s' defined within parent '%s'"
msgstr ""

#: dwarf2read.c:23397
#, possible-c-format
msgid "unsupported die ref attribute form: '%s'"
msgstr ""

#. For DW_FORM_data16 see attr_form_is_constant.
#: dwarf2read.c:23419
#, possible-c-format
msgid "Attribute value is not a constant (%s)"
msgstr ""

#: dwarf2read.c:23442
#, possible-c-format
msgid "Dwarf Error: Expected reference attribute [in module %s]"
msgstr ""

#: dwarf2read.c:23524
#, possible-c-format
msgid ""
"Dwarf Error: Cannot find DIE at %s referenced from DIE at %s [in module %s]"
msgstr ""

#. We shouldn't get here for a dummy CU, but don't crash on the user.
#. Instead just throw an error, not much else we can do.
#: dwarf2read.c:23557 dwarf2read.c:23699
#, possible-c-format
msgid "Dwarf Error: Dummy CU at %s referenced in module %s"
msgstr ""

#: dwarf2read.c:23563 dwarf2read.c:23705
#, possible-c-format
msgid "Dwarf Error: Cannot find DIE at %s referenced in module %s"
msgstr ""

#: dwarf2read.c:23625
#, possible-c-format
msgid ""
"Dwarf Error: DIE at %s referenced in module %s is neither DW_FORM_block* nor "
"DW_FORM_exprloc"
msgstr ""

#: dwarf2read.c:23911 dwarf2read.c:23949
#, possible-c-format
msgid ""
"Dwarf Error: Cannot find signatured DIE %s referenced from DIE at %s [in "
"module %s]"
msgstr ""

#: dwarf2read.c:23921 dwarf2read.c:23979
#, possible-c-format
msgid ""
"Dwarf Error: Problem reading signatured DIE %s referenced from DIE at %s [in "
"module %s]"
msgstr ""

#: dwarf2read.c:23970
#, possible-c-format
msgid ""
"Dwarf Error: Cannot build signatured type %s referenced from DIE at %s [in "
"module %s]"
msgstr ""

#: dwarf2read.c:24014
#, possible-c-format
msgid ""
"Dwarf Error: DW_AT_signature has bad form %s in DIE at %s [in module %s]"
msgstr ""

#: dwarf2read.c:24335
#, possible-c-format
msgid "unsupported stack op: '%s'"
msgstr ""

#: dwarf2read.c:24338
#, possible-c-format
msgid "unsupported stack op: '%02x'"
msgstr ""

#: dwarf2read.c:24349
msgid "location description stack overflow"
msgstr ""

#: dwarf2read.c:24355
msgid "location description stack underflow"
msgstr ""

#: dwarf2read.c:24418
#, possible-c-format
msgid "bad file number in macro information (%d)"
msgstr ""

#: dwarf2read.c:24481
#, possible-c-format
msgid ""
"macro definition contains spaces in formal argument list:\n"
"`%s'"
msgstr ""

#: dwarf2read.c:24712
#, possible-c-format
msgid "invalid form 0x%x in `%s'"
msgstr ""

#: dwarf2read.c:24739
#, possible-c-format
msgid "unrecognized DW_MACFINO opcode 0x%x"
msgstr ""

#: dwarf2read.c:24784
#, possible-c-format
msgid "unrecognized version `%d' in .debug_macro section"
msgstr ""

#. DWARF violation as no main source is present.
#: dwarf2read.c:24933
#, possible-c-format
msgid "debug info with no main source gives macro %s on line %d: %s"
msgstr ""

#: dwarf2read.c:24935 dwarf2read.c:24943 dwarf2read.c:24957
msgid "definition"
msgstr ""

#: dwarf2read.c:24935 dwarf2read.c:24943 dwarf2read.c:24957
msgid "undefinition"
msgstr ""

#: dwarf2read.c:24941
#, possible-c-format
msgid "debug info gives %s macro %s with %s line %d: %s"
msgstr ""

#: dwarf2read.c:24942 dwarf2read.c:24956 dwarf2read.c:24986
msgid "command-line"
msgstr ""

#: dwarf2read.c:24942 dwarf2read.c:24956
msgid "in-file"
msgstr ""

#: dwarf2read.c:24944 dwarf2read.c:24987
msgid "zero"
msgstr ""

#: dwarf2read.c:24944 dwarf2read.c:24987
msgid "non-zero"
msgstr ""

#. Fedora's rpm-build's "debugedit" binary
#. corrupted .debug_macro sections.
#.
#. For more info, see
#. https://bugzilla.redhat.com/show_bug.cgi?id=1708786
#: dwarf2read.c:24953
#, possible-c-format
msgid ""
"debug info gives %s invalid macro %s without body (corrupted?) at line %d on "
"file %s"
msgstr ""

#: dwarf2read.c:24984
#, possible-c-format
msgid "debug info gives source %d included from %s at %s line %d"
msgstr ""

#: dwarf2read.c:24986 skip.c:336
msgid "file"
msgstr ""

#: dwarf2read.c:25003
msgid "macro debug info has an unmatched `close_file' directive"
msgstr ""

#: dwarf2read.c:25030
msgid "no terminating 0-type entry for macros in `.debug_macinfo' section"
msgstr ""

#. This has actually happened; see
#. http://sourceware.org/bugzilla/show_bug.cgi?id=13568.
#: dwarf2read.c:25071
msgid "recursive DW_MACRO_import in .debug_macro section"
msgstr ""

#: dwarf2read.c:25165
#, possible-c-format
msgid "missing %s section"
msgstr ""

#: dwarf2read.c:25462
msgid "Location list used without specifying the CU base address."
msgstr ""

#: dwarf2read.c:25653
#, possible-c-format
msgid ""
"Dwarf Error: could not find partial DIE containing offset %s [in module %s]"
msgstr ""

#: dwarf2read.c:25666
#, possible-c-format
msgid "invalid dwarf2 offset %s"
msgstr ""

#: dwarf2read.c:25887
#, possible-c-format
msgid "DW_AT_allocated has the wrong form (%s) at DIE %s"
msgstr ""

#: dwarf2read.c:25903
#, possible-c-format
msgid "DW_AT_associated has the wrong form (%s) at DIE %s"
msgstr ""

#: dwarf2read.c:25932
#, possible-c-format
msgid "A problem internal to GDB: DIE %s has type already set"
msgstr ""

#: dwarf2read.c:26091
#, possible-c-format
msgid "Whether to always disassemble DWARF expressions is %s.\n"
msgstr ""

#: dwarf2read.c:26101
#, possible-c-format
msgid "Whether to check \"physname\" is %s.\n"
msgstr ""

#: dwarf2read.c:26108
msgid ""
"Set DWARF specific variables.\n"
"Configure DWARF variables such as the cache size."
msgstr ""

#. allow-unknown
#: dwarf2read.c:26114
msgid ""
"Show DWARF specific variables.\n"
"Show DWARF variables such as the cache size."
msgstr ""

#: dwarf2read.c:26121
msgid "Set the upper bound on the age of cached DWARF compilation units."
msgstr ""

#: dwarf2read.c:26122
msgid "Show the upper bound on the age of cached DWARF compilation units."
msgstr ""

#: dwarf2read.c:26123
msgid ""
"A higher limit means that cached compilation units will be stored\n"
"in memory longer, and more total memory will be used.  Zero disables\n"
"caching, which can slow down startup."
msgstr ""

#: dwarf2read.c:26133
msgid "Set whether `info address' always disassembles DWARF expressions."
msgstr ""

#: dwarf2read.c:26134
msgid "Show whether `info address' always disassembles DWARF expressions."
msgstr ""

#: dwarf2read.c:26135
msgid ""
"When enabled, DWARF expressions are always printed in an assembly-like\n"
"syntax.  When disabled, expressions will be printed in a more\n"
"conversational style, when possible."
msgstr ""

#: dwarf2read.c:26144
msgid "Set debugging of the DWARF reader."
msgstr ""

#: dwarf2read.c:26145
msgid "Show debugging of the DWARF reader."
msgstr ""

#: dwarf2read.c:26146
msgid ""
"When enabled (non-zero), debugging messages are printed during DWARF\n"
"reading and symtab expansion.  A value of 1 (one) provides basic\n"
"information.  A value greater than 1 provides more verbose information."
msgstr ""

#: dwarf2read.c:26154
msgid "Set debugging of the DWARF DIE reader."
msgstr ""

#: dwarf2read.c:26155
msgid "Show debugging of the DWARF DIE reader."
msgstr ""

#: dwarf2read.c:26156
msgid ""
"When enabled (non-zero), DIEs are dumped after they are read in.\n"
"The value is the maximum depth to print."
msgstr ""

#: dwarf2read.c:26163
msgid "Set debugging of the dwarf line reader."
msgstr ""

#: dwarf2read.c:26164
msgid "Show debugging of the dwarf line reader."
msgstr ""

#: dwarf2read.c:26165
msgid ""
"When enabled (non-zero), line number entries are dumped as they are read "
"in.\n"
"A value of 1 (one) provides basic information.\n"
"A value greater than 1 provides more verbose information."
msgstr ""

#: dwarf2read.c:26173
msgid "Set cross-checking of \"physname\" code against demangler."
msgstr ""

#: dwarf2read.c:26174
msgid "Show cross-checking of \"physname\" code against demangler."
msgstr ""

#: dwarf2read.c:26175
msgid ""
"When enabled, GDB's internal \"physname\" code is checked against\n"
"the demangler."
msgstr ""

#: dwarf2read.c:26182
msgid "Set whether to use deprecated gdb_index sections."
msgstr ""

#: dwarf2read.c:26183
msgid "Show whether to use deprecated gdb_index sections."
msgstr ""

#: dwarf2read.c:26184
msgid ""
"When enabled, deprecated .gdb_index sections are used anyway.\n"
"Normally they are ignored either because of a missing feature or\n"
"performance issue.\n"
"Warning: This option must be enabled before gdb reads the file."
msgstr ""

#: elfread.c:154
#, possible-c-format
msgid "Loadable section \"%s\" outside of ELF segments"
msgstr ""

#. This case indicates buggy inferior program, the resolved address
#. should never change.
#: elfread.c:754
#, possible-c-format
msgid ""
"gnu-indirect-function \"%s\" has changed its resolved function_address from "
"%s to %s"
msgstr ""

#: elfread.c:1011
#, possible-c-format
msgid "handle_inferior_event: Invalid gnu-indirect-function breakpoint type %d"
msgstr ""

#: elfread.c:1084 elfread.c:1097 elfread.c:1123 machoread.c:808 machoread.c:824
#, possible-c-format
msgid "Can't read symbols from %s: %s"
msgstr ""

#: eval.c:303
msgid "too many initializers"
msgstr ""

#: eval.c:307
msgid "don't know which variant you want to set"
msgstr ""

#: eval.c:368
msgid "tuple index out of range"
msgstr ""

#: eval.c:766
msgid "Cannot evaluate function -- may be inlined"
msgstr ""

#: eval.c:791 valarith.c:504 valarith.c:618
msgid "Xmethod is missing return type."
msgstr ""

#: eval.c:817
msgid ""
"Expression of type other than \"Function returning ...\" used as function"
msgstr ""

#: eval.c:912
msgid "Non-pointer-to-member value used in pointer-to-member construct"
msgstr ""

#. For the time being, we don't handle this.
#: eval.c:1145
#, possible-c-format
msgid "Call to overloaded function %s requires `this' pointer"
msgstr ""

#: eval.c:1344
#, possible-c-format
msgid "Symbol \"%s\" does not have any specific entry value"
msgstr ""

#: eval.c:1387
#, possible-c-format
msgid "Register $%s not available."
msgstr ""

#: eval.c:1400
#, possible-c-format
msgid "Value of register %s not available."
msgstr ""

#: eval.c:1509
msgid "(power)set type with unknown size"
msgstr ""

#. different element modes.
#: eval.c:1532
msgid "POWERSET tuple elements of different mode"
msgstr ""

#: eval.c:1536
msgid "incompatible POWERSET tuple elements"
msgstr ""

#: eval.c:1539
msgid "empty POWERSET tuple range"
msgstr ""

#: eval.c:1543
msgid "POWERSET tuple element out of range"
msgstr ""

#: eval.c:1708
msgid "no 'respondsTo:' or 'respondsToSelector:' method"
msgstr ""

#: eval.c:1717
msgid "no 'methodFor:' or 'methodForSelector:' method"
msgstr ""

#: eval.c:1736
msgid "Target does not respond to this message selector."
msgstr ""

#: eval.c:1821
msgid "method address has symbol information with non-function type; skipping"
msgstr ""

#: eval.c:1874
msgid "Expression of type other than \"method returning ...\" used as a method"
msgstr ""

#: eval.c:2007
msgid "Cannot perform substring on this type"
msgstr ""

#: eval.c:2123
msgid "non-pointer-to-member value used in pointer-to-member construct"
msgstr ""

#: eval.c:2398
#, possible-c-format
msgid "Too many subscripts for F77 (%d Max)"
msgstr ""

#: eval.c:2403
msgid "Wrong number of subscripts"
msgstr ""

#: eval.c:2598
msgid "Non-integral right operand for \"@\" operator."
msgstr ""

#: eval.c:2668
msgid "Attempt to dereference pointer to member without an object"
msgstr ""

#: eval.c:2733
msgid "could not determine alignment of type"
msgstr ""

#: eval.c:2939
msgid "Attempt to use a type as an expression"
msgstr ""

#. Removing this case and compiling with gcc -Wall reveals that
#. a lot of cases are hitting this case.  Some of these should
#. probably be removed from expression.h; others are legitimate
#. expressions which are (apparently) not fully implemented.
#.
#. If there are any cases landing here which mean a user error,
#. then they should be separate cases, with more descriptive
#. error messages.
#: eval.c:2968
msgid "GDB does not (yet) know how to evaluate that kind of expression"
msgstr ""

#: eval.c:3044
msgid "Attempt to take address of register or constant."
msgstr ""

#: eval.c:3343
msgid "Internal error in eval_type."
msgstr ""

#: eval.c:3354
msgid "Can't get dimensions for a non-array type"
msgstr ""

#: event-loop.c:431 event-loop.c:440 event-loop.c:504 event-loop.c:608
#: event-loop.c:713 event-loop.c:778 event-loop.c:861 event-loop.c:1232
msgid "use_poll without HAVE_POLL"
msgstr ""

#: event-loop.c:702
#, possible-c-format
msgid "Error detected on fd %d\n"
msgstr ""

#: event-loop.c:705
#, possible-c-format
msgid "Invalid or non-`poll'able fd %d\n"
msgstr ""

#: event-loop.c:720
#, possible-c-format
msgid "Exception condition detected on fd %d\n"
msgstr ""

#: event-top.c:374
msgid "double prompt"
msgstr ""

#. If stdin died, we may as well kill gdb.
#: event-top.c:488
msgid "error detected on stdin\n"
msgstr ""

#. This message is based on ANSI C, section 4.7.  Note that integer
#. divide by zero causes this, so "float" is a misnomer.
#: event-top.c:1203
msgid "Erroneous arithmetic operation."
msgstr ""

#: exceptions.c:108
msgid "Bad switch."
msgstr ""

#: exec.c:54
msgid "Local exec file"
msgstr ""

#: exec.c:55
msgid ""
"Use an executable file as a target.\n"
"Specify the filename of the executable file."
msgstr ""

#: exec.c:92
#, possible-c-format
msgid "Writing into executable and core files is %s.\n"
msgstr ""

#: exec.c:208
msgid ""
"No executable has been specified and target does not support\n"
"determining executable automatically.  Try using the \"file\" command."
msgstr ""

#: exec.c:261
msgid "No executable file now.\n"
msgstr ""

#: exec.c:286
#, possible-c-format
msgid "writing into executable files is not supported for %s sysroots"
msgstr ""

#: exec.c:334
#, possible-c-format
msgid "\"%s\": could not open as an executable file: %s."
msgstr ""

#: exec.c:351
#, possible-c-format
msgid "\"%s\": not in executable format: %s"
msgstr ""

#: exec.c:361
#, possible-c-format
msgid "\"%s\": can't find the file sections: %s"
msgstr ""

#: exec.c:398
msgid ""
"A program is being debugged already.\n"
"Are you sure you want to change the file? "
msgstr ""

#: exec.c:400
msgid "File not changed."
msgstr ""

#: exec.c:414
msgid "No executable file name was specified"
msgstr ""

#: exec.c:884 maint.c:449 maint.c:484
#, possible-c-format
msgid "file type %s.\n"
msgstr ""

#: exec.c:909
#, possible-c-format
msgid "Cannot find section for the entry point of %s."
msgstr ""

#: exec.c:915
#, possible-c-format
msgid "\tEntry point: %s\n"
msgstr ""

#: exec.c:948
msgid "\t<no file loaded>\n"
msgstr ""

#: exec.c:963
msgid "Must specify section name and its virtual address"
msgstr ""

#: exec.c:990
#, possible-c-format
msgid "Section %s not found"
msgstr ""

#: exec.c:1026
msgid "Can't create a corefile"
msgstr ""

#: exec.c:1042
msgid ""
"Use FILE as program to be debugged.\n"
"It is read for its symbols, for getting the contents of pure memory,\n"
"and it is the program executed when you use the `run' command.\n"
"If FILE cannot be found as specified, your execution directory path\n"
"($PATH) is searched for a command of that name.\n"
"No arg means to have no executable file and no symbols."
msgstr ""

#: exec.c:1052
msgid ""
"Use FILE as program for getting contents of pure memory.\n"
"If FILE cannot be found as specified, your execution directory path\n"
"is searched for a command of that name.\n"
"No arg means have no executable file."
msgstr ""

#: exec.c:1059
msgid ""
"Change the base address of section SECTION of the exec file to ADDR.\n"
"This can be used if the exec file does not contain section addresses,\n"
"(such as in the a.out format), or when the addresses specified in the\n"
"file itself are wrong.  Each section must be changed separately.  The\n"
"``info files'' command lists all the sections and their addresses."
msgstr ""

#: exec.c:1066
msgid "Set writing into executable and core files."
msgstr ""

#: exec.c:1067
msgid "Show writing into executable and core files."
msgstr ""

#: expprint.c:253
msgid "bad selector"
msgstr ""

#. Not found; don't try to keep going because we don't know how
#. to interpret further elements.
#. Not found; don't try to keep going because we don't know how
#. to interpret further elements.  For example, this happens
#. if opcode is OP_TYPE.
#: expprint.c:504 expprint.c:615
msgid "Invalid expression"
msgstr ""

#: expprint.c:515
#, possible-c-format
msgid "<language %s has no 'this'>"
msgstr ""

#: extension.c:199
#, possible-c-format
msgid "Scripting in the \"%s\" language is not supported in this copy of GDB."
msgstr ""

#: extension.c:869
#, possible-c-format
msgid "Error while looking for matching xmethod workers defined in %s."
msgstr ""

#: extension.c:883
#, possible-c-format
msgid "Error while looking for arg types of a xmethod worker defined in %s."
msgstr ""

#: extension.c:899
#, possible-c-format
msgid "Error while fetching result type of an xmethod worker defined in %s."
msgstr ""

#: f-exp.y:772 m2-exp.y:686
msgid "Overflow on numeric constant."
msgstr ""

#: f-exp.y:834 f-exp.y:840
msgid "kind value out of range"
msgstr ""

#: f-exp.y:901
#, possible-c-format
msgid "unsupported kind %d for type %s"
msgstr ""

#: f-lang.c:69
msgid "unrecognized character type"
msgstr ""

#: f-lang.c:287
#, possible-c-format
msgid "ABS of type %s not supported"
msgstr ""

#: f-lang.c:296
msgid "non-matching types for parameters to MOD ()"
msgstr ""

#: f-lang.c:315
msgid "calling MOD (N, 0) is undefined"
msgstr ""

#: f-lang.c:320
#, possible-c-format
msgid "MOD of type %s not supported"
msgstr ""

#: f-lang.c:329
msgid "argument to CEILING must be of type float"
msgstr ""

#: f-lang.c:344
msgid "argument to FLOOR must be of type float"
msgstr ""

#: f-lang.c:360
msgid "non-matching types for parameters to MODULO ()"
msgstr ""

#: f-lang.c:387
#, possible-c-format
msgid "MODULO of type %s not supported"
msgstr ""

#: f-lang.c:408
msgid "argument to kind must be an intrinsic type"
msgstr ""

#: f-typeprint.c:461
#, possible-c-format
msgid "Invalid type code (%d) in symbol table."
msgstr ""

#: f-valprint.c:50
msgid "Lower bound may not be '*' in F77"
msgstr ""

#: f-valprint.c:191
#, possible-c-format
msgid "Type node corrupt! F77 arrays cannot have %d subscripts (%d Max)"
msgstr ""

#: f-valprint.c:405
#, possible-c-format
msgid "Contents of F77 COMMON block '%s':\n"
msgstr ""

#: f-valprint.c:408
msgid "Contents of blank COMMON block:\n"
msgstr ""

#: f-valprint.c:459 stack.c:2598
msgid "No symbol table info available.\n"
msgstr ""

#: f-valprint.c:476
#, possible-c-format
msgid "No common block '%s'.\n"
msgstr ""

#: f-valprint.c:478
msgid "No common blocks.\n"
msgstr ""

#: f-valprint.c:486
msgid "Print out the values contained in a Fortran COMMON block."
msgstr ""

#: fbsd-nat.c:104
msgid "Couldn't fetch VM map entries."
msgstr ""

#: fbsd-nat.c:178
#, possible-c-format
msgid "Couldn't open %s."
msgstr ""

#: fbsd-nat.c:327 infcmd.c:3019 procfs.c:3552
msgid "Not supported on this target."
msgstr ""

#: fbsd-nat.c:335 linux-tdep.c:763 procfs.c:3574
msgid "No current process: you must name one."
msgstr ""

#: fbsd-nat.c:340
msgid "Invalid arguments."
msgstr ""

#: fbsd-nat.c:342 fbsd-tdep.c:1516
#, possible-c-format
msgid "process %d\n"
msgstr ""

#: fbsd-nat.c:354
msgid "unable to fetch command line"
msgstr ""

#: fbsd-nat.c:373
msgid "unable to fetch current working directory"
msgstr ""

#: fbsd-nat.c:394
msgid "unable to fetch executable path name"
msgstr ""

#: fbsd-nat.c:412
msgid "unable to fetch list of open files"
msgstr ""

#: fbsd-nat.c:435
msgid "unable to fetch virtual memory map"
msgstr ""

#: fbsd-nat.c:441 fbsd-nat.c:936 fbsd-nat.c:1441
msgid "Failed to fetch process information"
msgstr ""

#: fbsd-nat.c:842
#, possible-c-format
msgid "Debugging of FreeBSD lwp module is %s.\n"
msgstr ""

#: fbsd-nat.c:849
#, possible-c-format
msgid "Debugging of FreeBSD native target is %s.\n"
msgstr ""

#: fbsd-nat.c:1351 linux-nat.c:1010 procfs.c:2287 procfs.c:2408
#, possible-c-format
msgid "[%s exited]\n"
msgstr ""

#: fbsd-nat.c:1676
msgid "Set debugging of FreeBSD lwp module."
msgstr ""

#: fbsd-nat.c:1677
msgid "Show debugging of FreeBSD lwp module."
msgstr ""

#: fbsd-nat.c:1678 fbsd-nat.c:1686 linux-nat.c:4544 linux-nat.c:4553
msgid "Enables printf debugging output."
msgstr ""

#: fbsd-nat.c:1684
msgid "Set debugging of FreeBSD native target."
msgstr ""

#: fbsd-nat.c:1685
msgid "Show debugging of FreeBSD native target."
msgstr ""

#: fbsd-tdep.c:953
msgid "Failed to format IPv4 address"
msgstr ""

#: fbsd-tdep.c:968
msgid "Failed to format IPv6 address"
msgstr ""

#: fbsd-tdep.c:978
msgid ""
"Open files:\n"
"\n"
msgstr ""

#: fbsd-tdep.c:1057
msgid "unable to find open files in core file"
msgstr ""

#: fbsd-tdep.c:1063 fbsd-tdep.c:1196 fbsd-tdep.c:1244 linux-tdep.c:1053
msgid "malformed core note - too short for header"
msgstr ""

#: fbsd-tdep.c:1068 fbsd-tdep.c:1201 fbsd-tdep.c:1249 fbsd-tdep.c:1355
#: linux-tdep.c:1058
msgid "could not get core note contents"
msgstr ""

#: fbsd-tdep.c:1082 fbsd-tdep.c:1263
msgid "malformed core note - file structure too small"
msgstr ""

#. No output for summary mode.
#: fbsd-tdep.c:1131 linux-tdep.c:826 linux-tdep.c:1075 procfs.c:3509
msgid ""
"Mapped address spaces:\n"
"\n"
msgstr ""

#: fbsd-tdep.c:1190 linux-tdep.c:1044
msgid "unable to find mappings in core file"
msgstr ""

#: fbsd-tdep.c:1214
msgid "malformed core note - vmmap entry too small"
msgstr ""

#: fbsd-tdep.c:1328
msgid "unable to find process info in core file"
msgstr ""

#: fbsd-tdep.c:1350
msgid "malformed core note - too short"
msgstr ""

#: fbsd-tdep.c:1365
msgid "unsupported process information in core file"
msgstr ""

#: fbsd-tdep.c:1526
msgid "Command line unavailable"
msgstr ""

#: fbsd-tdep.c:1535
msgid "unable to read current working directory"
msgstr ""

#: fbsd-tdep.c:1544
msgid "unable to read executable path name"
msgstr ""

#: fbsd-tdep.c:1587
msgid "Executable path"
msgstr ""

#: fbsd-tdep.c:1588
msgid "Canary for SSP"
msgstr ""

#: fbsd-tdep.c:1590
msgid "OSRELDATE"
msgstr ""

#: fbsd-tdep.c:1591
msgid "Number of CPUs"
msgstr ""

#: fbsd-tdep.c:1592
msgid "Pagesizes"
msgstr ""

#: fbsd-tdep.c:1593
msgid "Number of pagesizes"
msgstr ""

#: fbsd-tdep.c:1594
msgid "Pointer to timehands"
msgstr ""

#: fbsd-tdep.c:1595
msgid "Initial stack protection"
msgstr ""

#: fbsd-tdep.c:1596
msgid "ELF header e_flags"
msgstr ""

#. FreeBSD doesn't use gdbarch_get_syscall_number since FreeBSD
#. native targets fetch the system call number from the
#. 'pl_syscall_code' member of struct ptrace_lwpinfo in fbsd_wait.
#. However, system call catching requires this function to be
#. set.
#: fbsd-tdep.c:1951
msgid "fbsd_get_sycall_number called"
msgstr ""

#: fbsd-tdep.c:1961
#, possible-c-format
msgid "Unable to resolve symbol '%s'"
msgstr ""

#: fbsd-tdep.c:1965
#, possible-c-format
msgid "Unable to read value of '%s'"
msgstr ""

#: fbsd-tdep.c:1983
msgid "Unable to find Struct_Obj_Entry symbol"
msgstr ""

#: fbsd-tdep.c:2027
msgid "Cannot fetch runtime linker structure offsets"
msgstr ""

#: fbsd-tdep.c:2036 fbsd-tdep.c:2052 fbsd-tdep.c:2061 target.c:687 target.c:772
msgid "Cannot find thread-local variables on this target"
msgstr ""

#: filesystem.c:67
#, possible-c-format
msgid ""
"The assumed file system kind for target reported file names is \"%s"
"\" (currently \"%s\").\n"
msgstr ""

#: filesystem.c:73
#, possible-c-format
msgid ""
"The assumed file system kind for target reported file names is \"%s\".\n"
msgstr ""

#: filesystem.c:85
msgid "Set assumed file system kind for target reported file names."
msgstr ""

#: filesystem.c:86
msgid "Show assumed file system kind for target reported file names."
msgstr ""

#: filesystem.c:88
msgid ""
"If `unix', target file names (e.g., loaded shared library file names)\n"
"starting the forward slash (`/') character are considered absolute,\n"
"and the directory separator character is the forward slash (`/').  If\n"
"`dos-based', target file names starting with a drive letter followed\n"
"by a colon (e.g., `c:'), are also considered absolute, and the\n"
"backslash (`\\') is also considered a directory separator.  Set to\n"
"`auto' (which is the default), to let GDB decide, based on its\n"
"knowledge of the target operating system."
msgstr ""

#: findcmd.c:71
msgid "Missing search parameters."
msgstr ""

#: findcmd.c:99
msgid "Invalid size granularity."
msgstr ""

#: findcmd.c:124
msgid "Empty search range.\n"
msgstr ""

#: findcmd.c:128 python/py-lazy-string.c:177 python/py-lazy-string.c:210
#: python/py-value.c:478
msgid "Invalid length."
msgstr ""

#: findcmd.c:132
msgid "Search space too large."
msgstr ""

#: findcmd.c:142
msgid "Invalid search space, end precedes start."
msgstr ""

#: findcmd.c:148
msgid "Overflow in address range computation, choose smaller range."
msgstr ""

#: findcmd.c:199
msgid "Missing search pattern."
msgstr ""

#: findcmd.c:202
msgid "Search space too small to contain pattern."
msgstr ""

#: findcmd.c:286
msgid ""
"Search memory for a sequence of bytes.\n"
"Usage:\n"
"find [/SIZE-CHAR] [/MAX-COUNT] START-ADDRESS, END-ADDRESS, EXPR1 [, "
"EXPR2 ...]\n"
"find [/SIZE-CHAR] [/MAX-COUNT] START-ADDRESS, +LENGTH, EXPR1 [, EXPR2 ...]\n"
"SIZE-CHAR is one of b,h,w,g for 8,16,32,64 bit values respectively,\n"
"and if not specified the size is taken from the type of the expression\n"
"in the current language.\n"
"Note that this means for example that in the case of C-like languages\n"
"a search for an untyped 0x42 will search for \"(int) 0x42\"\n"
"which is typically four bytes, and a search for a string \"hello\" will\n"
"include the trailing '\\0'.  The null terminator can be removed from\n"
"searching by using casts, e.g.: {char[5]}\"hello\".\n"
"\n"
"The address of the last match is stored as the value of \"$_\".\n"
"Convenience variable \"$numfound\" is set to the number of matches."
msgstr ""

#: findvar.c:59
#, possible-c-format
msgid "That operation is not available on integers of more than %d bytes."
msgstr ""

#: findvar.c:158
msgid "extract_typed_address: type is not a pointer or reference"
msgstr ""

#: findvar.c:211
msgid "store_typed_address: type is not a pointer or reference"
msgstr ""

#: findvar.c:570
#, possible-c-format
msgid "No frame is currently executing in block %s."
msgstr ""

#: findvar.c:573
msgid "No frame is currently executing in specified block"
msgstr ""

#: findvar.c:604
#, possible-c-format
msgid "Cannot read `%s' without registers"
msgstr ""

#: findvar.c:670 findvar.c:682
#, possible-c-format
msgid "Unknown argument list address for `%s'."
msgstr ""

#: findvar.c:696
#, possible-c-format
msgid "Cannot look up value of a typedef `%s'."
msgstr ""

#: findvar.c:723 findvar.c:733
#, possible-c-format
msgid "Value of register variable not available for `%s'."
msgstr ""

#: findvar.c:769
#, possible-c-format
msgid "Missing %s symbol \"%s\"."
msgstr ""

#: findvar.c:795
#, possible-c-format
msgid "Cannot look up value of a botched symbol `%s'."
msgstr ""

#: findvar.c:961
#, possible-c-format
msgid "Invalid register #%d, expecting 0 <= # < %d"
msgstr ""

#: fork-child.c:117 gdbserver/fork-child.c:83
msgid "setpgrp failed in child"
msgstr ""

#: fork-child.c:153
#, possible-c-format
msgid "Use of shell to start subprocesses is %s.\n"
msgstr ""

#: fork-child.c:160
msgid ""
"Set a wrapper for running programs.\n"
"The wrapper prepares the system and environment for the new program."
msgstr ""

#: fork-child.c:163
msgid "Show the wrapper for running programs."
msgstr ""

#: fork-child.c:169
msgid "Disable use of an execution wrapper."
msgstr ""

#: fork-child.c:173
msgid "Set use of shell to start subprocesses.  The default is on."
msgstr ""

#: fork-child.c:174
msgid "Show use of shell to start subprocesses."
msgstr ""

#: frame-unwind.c:168
msgid "frame_unwind_find_by_frame failed"
msgstr ""

#: frame.c:308 infrun.c:8730 stack.c:2076 stack.c:2363
msgid "Unable to restore previously selected frame."
msgstr ""

#: frame.c:320
#, possible-c-format
msgid "Frame debugging is %s.\n"
msgstr ""

#: frame.c:330
#, possible-c-format
msgid "Whether backtraces should continue past \"main\" is %s.\n"
msgstr ""

#: frame.c:341
#, possible-c-format
msgid ""
"Whether backtraces should continue past the entry point of a program is %s.\n"
msgstr ""

#: frame.c:353
#, possible-c-format
msgid "An upper bound on the number of backtrace levels is %s.\n"
msgstr ""

#: frame.c:973 frame.c:1045
msgid "PC not available"
msgstr ""

#: frame.c:975
msgid "PC not saved"
msgstr ""

#: frame.c:1084
msgid "Cannot pop the initial frame."
msgstr ""

#: frame.c:1091 infcmd.c:1957
msgid "Cannot find the caller frame."
msgstr ""

#: frame.c:1193 frame.c:1293 frame.c:1327
#, possible-c-format
msgid "Register %d was not saved"
msgstr ""

#: frame.c:1196 frame.c:1298 frame.c:1332 gdbsupport/common-regcache.c:34
#: regcache.c:567
#, possible-c-format
msgid "Register %d is not available"
msgstr ""

#: frame.c:1382
msgid "Attempt to assign to a register that was not saved."
msgstr ""

#: frame.c:1394
msgid "Attempt to assign to an unmodifiable value."
msgstr ""

#: frame.c:1452
#, possible-c-format
msgid ""
"Bad debug information detected: Attempt to read %d bytes from registers."
msgstr ""

#: frame.c:1605 ia64-libunwind-tdep.c:346 ia64-tdep.c:1917 ia64-tdep.c:2288
msgid "No registers."
msgstr ""

#: frame.c:1607 stack.c:1956 stack.c:1984 stack.c:3196 stack.c:3244
#: stack.c:3259 thread.c:1863
msgid "No stack."
msgstr ""

#: frame.c:1609
msgid "No memory."
msgstr ""

#. show_cmd_cb
#: frame.c:2942
msgid "Set whether backtraces should continue past \"main\"."
msgstr ""

#: frame.c:2943
msgid "Show whether backtraces should continue past \"main\"."
msgstr ""

#: frame.c:2944
msgid ""
"Normally the caller of \"main\" is not of interest, so GDB will terminate\n"
"the backtrace at \"main\".  Set this if you need to see the rest\n"
"of the stack trace."
msgstr ""

#. show_cmd_cb
#: frame.c:2953
msgid ""
"Set whether backtraces should continue past the entry point of a program."
msgstr ""

#: frame.c:2954
msgid ""
"Show whether backtraces should continue past the entry point of a program."
msgstr ""

#: frame.c:2955
msgid ""
"Normally there are no callers beyond the entry point of a program, so GDB\n"
"will terminate the backtrace there.  Set this if you need to see\n"
"the rest of the stack trace."
msgstr ""

#: frame.c:2970
msgid ""
"Set backtrace specific variables.\n"
"Configure backtrace variables such as the backtrace limit"
msgstr ""

#. allow-unknown
#: frame.c:2975
msgid ""
"Show backtrace specific variables.\n"
"Show backtrace variables such as the backtrace limit."
msgstr ""

#: frame.c:2982
msgid "Set an upper bound on the number of backtrace levels."
msgstr ""

#: frame.c:2983
msgid "Show the upper bound on the number of backtrace levels."
msgstr ""

#: frame.c:2984
msgid ""
"No more than the specified number of frames can be displayed or examined.\n"
"Literal \"unlimited\" or zero means no limit."
msgstr ""

#. Debug this files internals.
#: frame.c:2997
msgid "Set frame debugging."
msgstr ""

#: frame.c:2998
msgid "Show frame debugging."
msgstr ""

#: frame.c:2999
msgid "When non-zero, frame specific internal debugging is enabled."
msgstr ""

#: frv-linux-tdep.c:211
msgid "Can't read realtime sigtramp frame."
msgstr ""

#: frv-linux-tdep.c:218
msgid "not a signal trampoline"
msgstr ""

#: frv-tdep.c:422
#, possible-c-format
msgid "Bad register number %d"
msgstr ""

#: frv-tdep.c:1134
#, possible-c-format
msgid "Illegal return value length: %d"
msgstr ""

#: frv-tdep.c:1340
#, possible-c-format
msgid "Don't know how to return a %d-byte value."
msgstr ""

#: gcore.c:61
#, possible-c-format
msgid "Failed to open '%s' for output."
msgstr ""

#: gcore.c:87
msgid "Target does not support core file generation."
msgstr ""

#: gcore.c:95
#, possible-c-format
msgid "Failed to create 'note' section for corefile: %s"
msgstr ""

#: gcore.c:104
msgid "gcore: failed to get corefile memory sections from target."
msgstr ""

#: gcore.c:109
#, possible-c-format
msgid "writing note section (%s)"
msgstr ""

#: gcore.c:175
msgid "Can't find default bfd machine type (need execfile)."
msgstr ""

#: gcore.c:189
msgid "Can't find bfd architecture for corefile (need execfile)."
msgstr ""

#: gcore.c:455
#, possible-c-format
msgid "Couldn't make gcore segment: %s"
msgstr ""

#: gcore.c:553
#, possible-c-format
msgid "Memory read failed for corefile section, %s bytes at %s."
msgstr ""

#: gcore.c:562
#, possible-c-format
msgid "Failed to write corefile contents (%s)."
msgstr ""

#: gcore.c:596
msgid ""
"Save a core file with the current state of the debugged process.\n"
"Usage: generate-core-file [FILENAME]\n"
"Argument is optional filename.  Default filename is 'core.PROCESS_ID'."
msgstr ""

#: gdb-demangle.c:54
#, possible-c-format
msgid "Demangling of encoded C++/ObjC names when displaying symbols is %s.\n"
msgstr ""

#: gdb-demangle.c:67
#, possible-c-format
msgid "Demangling of C++/ObjC names in disassembly listings is %s.\n"
msgstr ""

#: gdb-demangle.c:86
#, possible-c-format
msgid "The current C++ demangling style is \"%s\".\n"
msgstr ""

#: gdb-demangle.c:191
msgid "Usage: demangle [-l LANGUAGE] [--] NAME"
msgstr ""

#: gdb-demangle.c:199
#, possible-c-format
msgid "Unknown language \"%s\""
msgstr ""

#: gdb-demangle.c:212
#, possible-c-format
msgid "Can't demangle \"%s\""
msgstr ""

#: gdb-demangle.c:239
msgid "Set demangling of encoded C++/ObjC names when displaying symbols."
msgstr ""

#: gdb-demangle.c:240
msgid "Show demangling of encoded C++/ObjC names when displaying symbols."
msgstr ""

#: gdb-demangle.c:246
msgid "Set demangling of C++/ObjC names in disassembly listings."
msgstr ""

#: gdb-demangle.c:247
msgid "Show demangling of C++/ObjC names in disassembly listings."
msgstr ""

#: gdb-demangle.c:255
msgid "Set the current C++ demangling style."
msgstr ""

#: gdb-demangle.c:256
msgid "Show the current C++ demangling style."
msgstr ""

#: gdb-demangle.c:257
msgid ""
"Use `set demangle-style' without arguments for a list of demangling styles."
msgstr ""

#: gdb-demangle.c:263
msgid ""
"Demangle a mangled name.\n"
"Usage: demangle [-l LANGUAGE] [--] NAME\n"
"If LANGUAGE is not specified, NAME is demangled in the current language."
msgstr ""

#: gdb_bfd.c:144
#, possible-c-format
msgid "BFD sharing is %s.\n"
msgstr ""

#: gdb_bfd.c:154
#, possible-c-format
msgid "BFD cache debugging is %s.\n"
msgstr ""

#: gdb_bfd.c:513
#, possible-c-format
msgid "cannot close \"%s\": %s"
msgstr ""

#: gdb_bfd.c:704
#, possible-c-format
msgid "Can't read data for section '%s' in file '%s'"
msgstr ""

#: gdb_bfd.c:731 gdb_bfd.c:744
#, possible-c-format
msgid "Problem reading \"%s\" for CRC: %s"
msgstr ""

#: gdb_bfd.c:971
msgid "List the BFDs that are currently open."
msgstr ""

#: gdb_bfd.c:976
msgid "Set whether gdb will share bfds that appear to be the same file."
msgstr ""

#: gdb_bfd.c:977
msgid "Show whether gdb will share bfds that appear to be the same file."
msgstr ""

#: gdb_bfd.c:978
msgid ""
"When enabled gdb will reuse existing bfds rather than reopening the\n"
"same file.  To decide if two files are the same then gdb compares the\n"
"filename, file size, file modification time, and file inode."
msgstr ""

#: gdb_bfd.c:988
msgid "Set bfd cache debugging."
msgstr ""

#: gdb_bfd.c:989
msgid "Show bfd cache debugging."
msgstr ""

#: gdb_bfd.c:990
msgid "When non-zero, bfd cache specific debugging is enabled."
msgstr ""

#: gdbarch-selftests.c:77 regcache.c:1526 regcache.c:1694
msgid "target already pushed"
msgstr ""

#: gdbarch.c:68
#, possible-c-format
msgid "Architecture debugging is %s.\n"
msgstr ""

#: gdbarch.c:726
#, possible-c-format
msgid "verify_gdbarch: the following are invalid ...%s"
msgstr ""

#: gdbarch.c:5322
msgid "gdbarch_architecture_names: multi-arch unknown"
msgstr ""

#: gdbarch.c:5348
#, possible-c-format
msgid "gdbarch: Attempt to register unknown architecture (%d)"
msgstr ""

#: gdbarch.c:5359
#, possible-c-format
msgid "gdbarch: Duplicate registration of architecture (%s)"
msgstr ""

#: gdbarch.c:5554
msgid "Set architecture debugging."
msgstr ""

#: gdbarch.c:5555
msgid "Show architecture debugging."
msgstr ""

#: gdbarch.c:5556
msgid "When non-zero, architecture debugging is enabled."
msgstr ""

#: gdbserver/linux-x86-low.c:766 gdbserver/linux-tile-low.c:159
msgid "Can't debug 64-bit process with 32-bit GDBserver"
msgstr ""

#: gdbserver/linux-x86-low.c:769
msgid "Can't debug x86-64 process with 32-bit GDBserver"
msgstr ""

#: gdbserver/remote-utils.c:198
#, c-format
msgid "Could not obtain remote address: %s\n"
msgstr ""

#: gdbserver/remote-utils.c:201
#, c-format
msgid "Remote debugging from host %s, port %s\n"
msgstr ""

#: gdbserver/remote-utils.c:276
#, possible-c-format
msgid "%s: cannot resolve name: %s"
msgstr ""

#: gdbserver/remote-utils.c:309
#, possible-c-format
msgid "Invalid 'ai_family' %d\n"
msgstr ""

#: gdbserver/remote-utils.c:405
#, c-format
msgid "Can't obtain port where we are listening: %s"
msgstr ""

#: gdbserver/remote-utils.c:408
#, c-format
msgid "Listening on port %s\n"
msgstr ""

#: gdbserver/gdbreplay.c:175 ser-tcp.c:291
#, possible-c-format
msgid "Missing port on hostname '%s'"
msgstr ""

#: gdbserver/linux-s390-low.c:482
msgid "Couldn't determine word size, assuming 64-bit."
msgstr ""

#: gdbserver/ax.c:837 printcmd.c:2587
msgid "Wrong number of arguments for specified format-string"
msgstr ""

#: gdbserver/ax.c:889
msgid "long long not supported in agent printf"
msgstr ""

#: gdbserver/ax.c:928
#, possible-c-format
msgid "Format directive in '%s' not supported in agent printf"
msgstr ""

#: gdbserver/ax.c:1334
msgid "Unterminated format string in printf bytecode"
msgstr ""

#: gdbserver/linux-low.c:745 linux-nat.c:2115
#, possible-c-format
msgid "unknown ptrace event %d"
msgstr ""

#: gdbserver/linux-low.c:1171 linux-nat.c:1138
#, possible-c-format
msgid "Cannot attach to lwp %d: %s"
msgstr ""

#: gdbserver/linux-low.c:1563 linux-nat.c:1423
#, possible-c-format
msgid "Couldn't reap LWP %d while detaching: %s"
msgstr ""

#: gdbserver/linux-low.c:1568 linux-nat.c:1428
#, possible-c-format
msgid "Reaping LWP %d while detaching returned unexpected status 0x%x"
msgstr ""

#: gdbserver/linux-low.c:1575 linux-nat.c:1435
#, possible-c-format
msgid "Can't detach %s: %s"
msgstr ""

#: gdbserver/regcache.c:439
#, possible-c-format
msgid "That operation is not available on integers of more than%d bytes."
msgstr ""

#: gdbserver/thread-db.c:666
#, possible-c-format
msgid "libthread-db-search-path component too long, ignored: %s."
msgstr ""

#: gdbserver/target.h:624 gdbserver/target.h:633 gdbserver/target.h:644
#: gdbserver/target.h:654 remote.c:13763 remote.c:13812 remote.c:13853
msgid "Target does not support branch tracing."
msgstr ""

#: gdbserver/server.c:272 remote-sim.c:625
msgid "No executable file specified."
msgstr ""

#: gdbserver/server.c:392 gdbserver/server.c:404
msgid "Btrace already enabled."
msgstr ""

#: gdbserver/server.c:417
msgid "Branch tracing not enabled."
msgstr ""

#: gdbserver/server.c:420 x86-linux-nat.c:241
msgid "Could not disable branch tracing."
msgstr ""

#: gdbserver/server.c:462
msgid "Bad Qbtrace operation.  Use bts, pt, or off."
msgstr ""

#: gdbserver/server.c:666
#, possible-c-format
msgid "[QEnvironmentHexEncoded received '%s']\n"
msgstr ""

#: gdbserver/server.c:667
#, possible-c-format
msgid "[Environment variable to be set: '%s']\n"
msgstr ""

#: gdbserver/server.c:675
#, possible-c-format
msgid "Unexpected format for environment variable: '%s'"
msgstr ""

#: gdbserver/server.c:697
#, possible-c-format
msgid "[QEnvironmentUnset received '%s']\n"
msgstr ""

#: gdbserver/server.c:698
#, possible-c-format
msgid "[Environment variable to be unset: '%s']\n"
msgstr ""

#: gdbserver/server.c:860
#, possible-c-format
msgid "[Inferior will %s started with shell]"
msgstr ""

#: gdbserver/server.c:878
#, possible-c-format
msgid "[Set the inferior's current directory to %s]\n"
msgstr ""

#: gdbserver/server.c:888
msgid "[Unset the inferior's current directory; will use gdbserver's cwd]\n"
msgstr ""

#: gdbserver/server.c:3563
#, possible-c-format
msgid "Could not find current working directory: %s"
msgstr ""

#: gdbserver/server.c:3771 maint.c:1123 maint.c:1137
#, c-format
msgid "Selftests have been disabled for this build.\n"
msgstr ""

#: gdbserver/win32-low.c:585
msgid "Could not convert the expanded inferior cwd to wide-char."
msgstr ""

#. ??? TODO: handle other escape sequences.
#: gdbsupport/format.c:90
#, possible-c-format
msgid "Unrecognized escape character \\%c in format string."
msgstr ""

#: gdbsupport/format.c:344
msgid "`*' not supported for precision or width in printf"
msgstr ""

#: gdbsupport/format.c:347
msgid "Format specifier `n' not supported in printf"
msgstr ""

#: gdbsupport/format.c:350
msgid "Incomplete format specifier at end of format string"
msgstr ""

#: gdbsupport/format.c:353
#, possible-c-format
msgid "Unrecognized format specifier '%c' in printf"
msgstr ""

#: gdbsupport/format.c:357
#, possible-c-format
msgid "Inappropriate modifiers to format specifier '%c' in printf"
msgstr ""

#: gdbsupport/pathstuff.c:258
msgid "Couldn't find temp dir path, both TMP and TEMP are unset."
msgstr ""

#: gdbsupport/scoped_mmap.c:40
msgid "file to mmap is empty"
msgstr ""

#: gdbsupport/btrace-common.c:32
msgid "No or unknown format"
msgstr ""

#: gdbsupport/btrace-common.c:35
msgid "Branch Trace Store"
msgstr ""

#: gdbsupport/btrace-common.c:38
msgid "Intel Processor Trace"
msgstr ""

#: gdbsupport/btrace-common.c:41 gdbsupport/btrace-common.c:61
msgid "Unknown branch trace format"
msgstr ""

#: gdbsupport/common-utils.c:57
msgid "vasprintf call failed"
msgstr ""

#: gdbsupport/agent.c:117
msgid "Error reading helper thread's id in lib"
msgstr ""

#: gdbsupport/agent.c:152
#, possible-c-format
msgid "error opening sync socket: %s"
msgstr ""

#: gdbsupport/agent.c:161
msgid "string overflow allocating socket name"
msgstr ""

#: gdbsupport/agent.c:169
#, possible-c-format
msgid ""
"error connecting sync socket (%s): %s. Make sure the directory exists and "
"that it is writable."
msgstr ""

#: gdbsupport/agent.c:200
msgid "unable to write"
msgstr ""

#: gdbsupport/agent.c:248
msgid "Error reading command response"
msgstr ""

#: gdbsupport/agent.c:268
msgid "Error reading capability of agent"
msgstr ""

#: gdbsupport/gdb_assert.h:42
#, possible-c-format
msgid "%s: Assertion `%s' failed."
msgstr ""

#: gdbsupport/gdb_assert.h:46
#, possible-c-format
msgid "Assertion `%s' failed."
msgstr ""

#: gdbsupport/print-utils.c:241
msgid "hex_string_custom: insufficient space to store result"
msgstr ""

#: gdbsupport/signals.c:352
msgid "GDB bug: target.c (gdb_signal_from_host): unrecognized real-time signal"
msgstr ""

#. The user might be trying to do "signal SIGSAK" where this system
#. doesn't have SIGSAK.
#: gdbsupport/signals.c:647
#, possible-c-format
msgid "Signal %s does not exist on this system."
msgstr ""

#: gdbsupport/gdb-dlfcn.c:73 gdbsupport/gdb-dlfcn.c:87
#, possible-c-format
msgid "Could not load %s: %s"
msgstr ""

#: gdbsupport/filestuff.c:218
msgid "fd not found in open_fds"
msgstr ""

#: gdbsupport/filestuff.c:381
msgid "socketpair not available on this host"
msgstr ""

#: gdbsupport/filestuff.c:422
msgid "pipe not available on this host"
msgstr ""

#: gdbsupport/gdb_tilde_expand.c:39
#, possible-c-format
msgid "Could not find a match for '%s'."
msgstr ""

#: gdbsupport/gdb_tilde_expand.c:41
#, possible-c-format
msgid "glob could not process pattern '%s'."
msgstr ""

#: gdbsupport/signals-state-save-restore.c:74
#, c-format
msgid "warning: Found custom handler for signal %d (%s) preinstalled.\n"
msgstr ""

#: gdbsupport/signals-state-save-restore.c:82
#, c-format
msgid ""
"Some signal dispositions inherited from the environment (SIG_DFL/SIG_IGN)\n"
"won't be propagated to spawned programs.\n"
msgstr ""

#: gdbsupport/gdb_string_view.h:190
#, possible-c-format
msgid ""
"basic_string_view::at: __pos (which is %zu) >= this->size() (which is %zu)"
msgstr ""

#: gdbsupport/gdb_string_view.h:260
#, possible-c-format
msgid ""
"basic_string_view::copy: __pos (which is %zu) > this->size() (which is %zu)"
msgstr ""

#: gdbsupport/gdb_string_view.h:280
#, possible-c-format
msgid ""
"basic_string_view::substr: __pos (which is %zu) > this->size() (which is %zu)"
msgstr ""

#: gdbsupport/rsp-low.c:35
#, possible-c-format
msgid "Reply contains invalid hex digit %d"
msgstr ""

#: gdbsupport/rsp-low.c:289
msgid "Received too much data from the target."
msgstr ""

#: gdbsupport/rsp-low.c:303
msgid "Unmatched escape character in target response."
msgstr ""

#: gdbsupport/common-exceptions.c:77 gdbsupport/common-exceptions.c:122
msgid "bad state"
msgstr ""

#: gdbsupport/netstuff.c:68
#, possible-c-format
msgid "Missing close bracket in hostname '%s'"
msgstr ""

#: gdbsupport/netstuff.c:78
#, possible-c-format
msgid "Invalid cruft after close bracket in '%s'"
msgstr ""

#: gdbsupport/netstuff.c:86
#, possible-c-format
msgid "Missing open bracket in hostname '%s'"
msgstr ""

#: gdbsupport/selftest.c:86
#, possible-c-format
msgid "Running selftest %s.\n"
msgstr ""

#: gdbsupport/selftest.c:99
#, possible-c-format
msgid "Ran %d unit tests, %d failed\n"
msgstr ""

#: gdbsupport/tdesc.c:307 gdbsupport/tdesc.c:361
#, possible-c-format
msgid "xml output is not supported for type \"%s\"."
msgstr ""

#. Check that VALUE is true, and, if not, throw an exception.
#: gdbsupport/selftest.h:70
#, possible-c-format
msgid "self-test failed at %s:%d"
msgstr ""

#: gdbtypes.c:137
#, possible-c-format
msgid ""
"Resolution of opaque struct/class/union types (if set before loading "
"symbols) is %s.\n"
msgstr ""

#: gdbtypes.c:148
#, possible-c-format
msgid "Debugging of C++ overloading is %s.\n"
msgstr ""

#: gdbtypes.c:158
#, possible-c-format
msgid "Strict type checking is %s.\n"
msgstr ""

#: gdbtypes.c:593
#, possible-c-format
msgid "Unknown address space specifier: \"%s\""
msgstr ""

#: gdbtypes.c:1548
#, possible-c-format
msgid "Invalid anonymous type %s [in module %s], GCC PR debug/47510 bug?"
msgstr ""

#: gdbtypes.c:1571
#, possible-c-format
msgid "No type named %s."
msgstr ""

#: gdbtypes.c:1612 objc-lang.c:96
#, possible-c-format
msgid "No struct type named %s."
msgstr ""

#: gdbtypes.c:1616 gdbtypes.c:1691 objc-lang.c:103
#, possible-c-format
msgid "This context has class, union or enum %s, not a struct."
msgstr ""

#: gdbtypes.c:1634
#, possible-c-format
msgid "No union type named %s."
msgstr ""

#. If we get here, it's not a union.
#: gdbtypes.c:1642
#, possible-c-format
msgid "This context has class, struct or enum %s, not a union."
msgstr ""

#: gdbtypes.c:1657
#, possible-c-format
msgid "No enum type named %s."
msgstr ""

#: gdbtypes.c:1661
#, possible-c-format
msgid "This context has class, struct or union %s, not an enum."
msgstr ""

#: gdbtypes.c:1687
#, possible-c-format
msgid "No template type named %s."
msgstr ""

#: gdbtypes.c:1717
#, possible-c-format
msgid "Type %s is not a structure or union type."
msgstr ""

#: gdbtypes.c:1753
#, possible-c-format
msgid "Type %s has no component named %s."
msgstr ""

#: gdbtypes.c:1918
msgid "stub type has NULL name"
msgstr ""

#: gdbtypes.c:2076
msgid ""
"bit strides that are not a multiple of the byte size are currently not "
"supported"
msgstr ""

#. Could be a bug in our code, but it could also happen
#. if the DWARF info is not correct.  Issue a warning,
#. and assume no byte/bit stride (leave bit_stride = 0).
#: gdbtypes.c:2158
#, possible-c-format
msgid "cannot determine array stride for type %s"
msgstr ""

#: gdbtypes.c:2248
msgid "Cannot determine struct field location (invalid location kind)"
msgstr ""

#: gdbtypes.c:2700
#, possible-c-format
msgid "Internal: Cannot demangle mangled name `%s'."
msgstr ""

#: gdbtypes.c:3788
#, possible-c-format
msgid "Unsupported field kind %d by check_types_equal"
msgstr ""

#: gdbtypes.c:4455
#, possible-c-format
msgid ") length %d\n"
msgstr ""

#: gdbtypes.c:4604
msgid " <same as already seen type>\n"
msgstr ""

#: gdbtypes.c:5051
#, possible-c-format
msgid "Unexpected type field location kind: %d"
msgstr ""

#: gdbtypes.c:5696
msgid "Set debugging of C++ overloading."
msgstr ""

#: gdbtypes.c:5697
msgid "Show debugging of C++ overloading."
msgstr ""

#: gdbtypes.c:5698
msgid "When enabled, ranking of the functions is displayed."
msgstr ""

#: gdbtypes.c:5707
msgid ""
"Set resolution of opaque struct/class/union types (if set before loading "
"symbols)."
msgstr ""

#: gdbtypes.c:5709
msgid ""
"Show resolution of opaque struct/class/union types (if set before loading "
"symbols)."
msgstr ""

#: gdbtypes.c:5718
msgid "Set strict type checking."
msgstr ""

#: gdbtypes.c:5719
msgid "Show strict type checking."
msgstr ""

#. * A helper macro that returns the name of a type or "unnamed type"
#. if the type has no name.
#: gdbtypes.h:1600
msgid "<unnamed type>"
msgstr ""

#. * A helper macro that returns the name of an error type.  If the
#. type has a name, it is used; otherwise, a default is used.
#: gdbtypes.h:1606
msgid "<error type>"
msgstr ""

#: gnu-nat.c:345
#, possible-c-format
msgid "Stopped %s."
msgstr ""

#: gnu-nat.c:483 gnu-nat.c:513
#, possible-c-format
msgid "Error setting exception port for %s: %s"
msgstr ""

#: gnu-nat.c:590
#, possible-c-format
msgid "Couldn't request notification for port %lu: %s"
msgstr ""

#: gnu-nat.c:740
#, possible-c-format
msgid "Error allocating event port: %s"
msgstr ""

#: gnu-nat.c:765
#, possible-c-format
msgid "Error getting task for pid %d: %s"
msgstr ""

#: gnu-nat.c:869
#, possible-c-format
msgid "Pid %d has an additional task suspend count of %d; clear it? "
msgstr ""

#: gnu-nat.c:872
msgid "Additional task suspend count left untouched."
msgstr ""

#: gnu-nat.c:899 gnu-nat.c:904
#, possible-c-format
msgid "Can't modify tracing state for pid %d: %s"
msgstr ""

#: gnu-nat.c:1376
#, possible-c-format
msgid "Can't forward spontaneous exception (%s)."
msgstr ""

#. Can't do too much...
#: gnu-nat.c:1416
#, possible-c-format
msgid "Can't deliver signal %s: No signal thread."
msgstr ""

#: gnu-nat.c:1418
#, possible-c-format
msgid "Delivering signal %s: %s"
msgstr ""

#: gnu-nat.c:1449
#, possible-c-format
msgid "Can't continue process: %s"
msgstr ""

#: gnu-nat.c:1491
msgid "There are no threads; try again later."
msgstr ""

#: gnu-nat.c:1515
#, possible-c-format
msgid "wait request failed: %s"
msgstr ""

#: gnu-nat.c:1551
#, possible-c-format
msgid "Couldn't wait for an event: %s"
msgstr ""

#. Whatever it is, it's something strange.
#: gnu-nat.c:1571
#, possible-c-format
msgid "Got a strange event, msg id = %d."
msgstr ""

#: gnu-nat.c:1574
#, possible-c-format
msgid "Handling event, msgid = %d: %s"
msgstr ""

#: gnu-nat.c:1749
#, possible-c-format
msgid "Pid %d died with unknown exit status, using SIGKILL."
msgstr ""

#: gnu-nat.c:1802
#, possible-c-format
msgid "illegal rpc: %s"
msgstr ""

#: gnu-nat.c:1847
#, possible-c-format
msgid "Can't wait for pid %d: %s"
msgstr ""

#: gnu-nat.c:1953
#, possible-c-format
msgid "Signal delivery failed: %s"
msgstr ""

#: gnu-nat.c:2025
#, possible-c-format
msgid "Aborting %s with unforwarded exception %s."
msgstr ""

#: gnu-nat.c:2054
#, possible-c-format
msgid "Can't run single thread id %s: no such thread!"
msgstr ""

#: gnu-nat.c:2065
#, possible-c-format
msgid "Can't step thread id %s: no such thread."
msgstr ""

#: gnu-nat.c:2286
msgid "stop target function not implemented"
msgstr ""

#: gnu-nat.c:2320
#, possible-c-format
msgid "Read from inferior faulted: %s"
msgstr ""

#: gnu-nat.c:2326
#, possible-c-format
msgid "gnu_read_inferior vm_deallocate failed: %s"
msgstr ""

#: gnu-nat.c:2413
#, possible-c-format
msgid "No memory at 0x%lx. Nothing written"
msgstr ""

#: gnu-nat.c:2422
#, possible-c-format
msgid "Memory at address 0x%lx is unwritable. Nothing written"
msgstr ""

#: gnu-nat.c:2495
#, possible-c-format
msgid "%s: %s"
msgstr ""

#: gnu-nat.c:2660
#, possible-c-format
msgid "vm_region failed: %s"
msgstr ""

#: gnu-nat.c:2781
#, possible-c-format
msgid "Illegal argument for \"%s\" command, should be an integer."
msgstr ""

#: gnu-nat.c:2794
#, possible-c-format
msgid "Illegal argument for \"%s\" command, should be \"%s\" or \"%s\"."
msgstr ""

#: gnu-nat.c:2806
#, possible-c-format
msgid "Garbage after \"%s\" command: `%s'"
msgstr ""

#: gnu-nat.c:2817
msgid "No current thread."
msgstr ""

#: gnu-nat.c:2828
msgid "No current process."
msgstr ""

#: gnu-nat.c:2948
msgid "No inferior task."
msgstr ""

#: gnu-nat.c:2954
#, possible-c-format
msgid "Couldn't extract send right %lu from inferior: %s"
msgstr ""

#: gnu-nat.c:2970
#, possible-c-format
msgid "Can't set exception port for %s: %s"
msgstr ""

#: gnu-nat.c:2981
msgid "No argument to \"set task exception-port\" command."
msgstr ""

#: gnu-nat.c:3007
msgid ""
"Illegal argument to \"set signal-thread\" command.\n"
"Should be a thread ID, or \"none\"."
msgstr ""

#: gnu-nat.c:3158
#, possible-c-format
msgid "%ld: %s."
msgstr ""

#: gnu-nat.c:3168 utils.c:604
#, possible-c-format
msgid "%s."
msgstr ""

#: gnu-nat.c:3208
msgid ""
"Set whether the new threads are suspended while gdb has control.\n"
"This property normally has no effect because the whole task is\n"
"suspended, however, that may be disabled with \"set task pause off\".\n"
"The default value is \"off\"."
msgstr ""

#: gnu-nat.c:3214
msgid "Show whether new threads are suspended while gdb has control."
msgstr ""

#: gnu-nat.c:3218
msgid "Set whether new threads are allowed to run (once gdb has noticed them)."
msgstr ""

#: gnu-nat.c:3221
msgid ""
"Show whether new threads are allowed to run (once gdb has noticed them)."
msgstr ""

#: gnu-nat.c:3226
msgid "Set the default detach-suspend-count value for new threads."
msgstr ""

#: gnu-nat.c:3229
msgid "Show the default detach-suspend-count value for new threads."
msgstr ""

#: gnu-nat.c:3232
msgid ""
"Set whether the inferior process's signals will be intercepted.\n"
"Mach exceptions (such as breakpoint traps) are not affected."
msgstr ""

#: gnu-nat.c:3237
msgid "Show whether the inferior process's signals will be intercepted."
msgstr ""

#: gnu-nat.c:3242
msgid ""
"Set the thread that gdb thinks is the libc signal thread.\n"
"This thread is run when delivering a signal to a non-stopped process."
msgstr ""

#: gnu-nat.c:3247
msgid "Set the thread that gdb thinks is the libc signal thread."
msgstr ""

#: gnu-nat.c:3252
msgid ""
"Set whether gdb thinks the inferior process is stopped as with SIGSTOP.\n"
"Stopped process will be continued by sending them a signal."
msgstr ""

#: gnu-nat.c:3256
msgid ""
"Show whether gdb thinks the inferior process is stopped as with SIGSTOP."
msgstr ""

#: gnu-nat.c:3260
msgid ""
"Set whether exceptions in the inferior process will be trapped.\n"
"When exceptions are turned off, neither breakpoints nor single-stepping\n"
"will work."
msgstr ""

#: gnu-nat.c:3267
msgid "Show whether exceptions in the inferior process will be trapped."
msgstr ""

#: gnu-nat.c:3272
msgid "Command prefix for setting task attributes."
msgstr ""

#: gnu-nat.c:3275
msgid "Command prefix for showing task attributes."
msgstr ""

#: gnu-nat.c:3278
msgid ""
"Set whether the task is suspended while gdb has control.\n"
"A value of \"on\" takes effect immediately, otherwise nothing happens\n"
"until the next time the program is continued.\n"
"When setting this to \"off\", \"set thread default pause on\" can be\n"
"used to pause individual threads by default instead."
msgstr ""

#: gnu-nat.c:3286
msgid "Show whether the task is suspended while gdb has control."
msgstr ""

#: gnu-nat.c:3290
msgid "Set the suspend count will leave on the thread when detaching."
msgstr ""

#: gnu-nat.c:3293
msgid "Show the suspend count will leave on the thread when detaching."
msgstr ""

#: gnu-nat.c:3297
msgid ""
"Set the task exception port to which we forward exceptions.\n"
"The argument should be the value of the send right in the task."
msgstr ""

#. A convenient way of turning on all options require to noninvasively
#. debug running tasks.
#: gnu-nat.c:3307
msgid ""
"Set task options so that we interfere as little as possible.\n"
"This is the same as setting `task pause', `exceptions', and\n"
"`signals' to the opposite value."
msgstr ""

#: gnu-nat.c:3315
msgid "Show information about the task's send rights."
msgstr ""

#: gnu-nat.c:3317
msgid "Show information about the task's receive rights."
msgstr ""

#: gnu-nat.c:3319
msgid "Show information about the task's port rights."
msgstr ""

#: gnu-nat.c:3321
msgid "Show information about the task's port sets."
msgstr ""

#: gnu-nat.c:3323
msgid "Show information about the task's dead names."
msgstr ""

#: gnu-nat.c:3400
msgid "No argument to \"set thread exception-port\" command."
msgstr ""

#: gnu-nat.c:3444
msgid "Command prefix for setting thread properties."
msgstr ""

#: gnu-nat.c:3447
msgid "Command prefix for setting default thread properties."
msgstr ""

#: gnu-nat.c:3451
msgid "Command prefix for showing thread properties."
msgstr ""

#: gnu-nat.c:3454
msgid "Command prefix for showing default thread properties."
msgstr ""

#: gnu-nat.c:3458
msgid ""
"Set whether the current thread is suspended while gdb has control.\n"
"A value of \"on\" takes effect immediately, otherwise nothing happens\n"
"until the next time the program is continued.  This property normally\n"
"has no effect because the whole task is suspended, however, that may\n"
"be disabled with \"set task pause off\".\n"
"The default value is \"off\"."
msgstr ""

#: gnu-nat.c:3466
msgid "Show whether the current thread is suspended while gdb has control."
msgstr ""

#: gnu-nat.c:3471
msgid "Set whether the current thread is allowed to run."
msgstr ""

#: gnu-nat.c:3474
msgid "Show whether the current thread is allowed to run."
msgstr ""

#: gnu-nat.c:3477
msgid ""
"Set the suspend count will leave on the thread when detaching.\n"
"Note that this is relative to suspend count when gdb noticed the thread;\n"
"use the `thread takeover-suspend-count' to force it to an absolute value."
msgstr ""

#: gnu-nat.c:3482
msgid ""
"Show the suspend count will leave on the thread when detaching.\n"
"Note that this is relative to suspend count when gdb noticed the thread;\n"
"use the `thread takeover-suspend-count' to force it to an absolute value."
msgstr ""

#: gnu-nat.c:3488
msgid ""
"Set the thread exception port to which we forward exceptions.\n"
"This overrides the task exception port.\n"
"The argument should be the value of the send right in the task."
msgstr ""

#: gnu-nat.c:3497
msgid ""
"Force the threads absolute suspend-count to be gdb's.\n"
"Prior to giving this command, gdb's thread suspend-counts are relative\n"
"to the thread's initial suspend-count when gdb notices the threads."
msgstr ""

#: gnu-nat.c:3513
msgid "Set debugging output for the gnu backend."
msgstr ""

#: gnu-nat.c:3514
msgid "Show debugging output for the gnu backend."
msgstr ""

#: gnu-nat.c:3541
#, possible-c-format
msgid "Error flushing inferior's cache : %s"
msgstr ""

#: gnu-v2-abi.c:175
msgid "I'm confused:  virtual function table has bad type"
msgstr ""

#: gnu-v2-abi.c:372
msgid "Virtual baseclass pointer is not available"
msgstr ""

#: gnu-v2-abi.c:394
msgid "Baseclass offset not found"
msgstr ""

#: gnu-v3-abi.c:335
#, possible-c-format
msgid "can't find linker symbol for virtual table for `%s' value"
msgstr ""

#: gnu-v3-abi.c:338
#, possible-c-format
msgid "  found `%s' instead"
msgstr ""

#: gnu-v3-abi.c:420
msgid "Only classes can have virtual functions."
msgstr ""

#: gnu-v3-abi.c:470
msgid "Expected a negative vbase offset (old compiler?)"
msgstr ""

#: gnu-v3-abi.c:474
msgid "Misaligned vbase offset."
msgstr ""

#: gnu-v3-abi.c:888
#, possible-c-format
msgid "vtable for '%s' @ %s (subobject @ %s):\n"
msgstr ""

#: gnu-v3-abi.c:917 printcmd.c:2042 stack.c:1581 value.c:2554
#, possible-c-format
msgid "<error: %s>"
msgstr ""

#: gnu-v3-abi.c:964
msgid "This object does not have a virtual function table\n"
msgstr ""

#: gnu-v3-abi.c:1087
msgid "cannot find typeinfo for unnamed type"
msgstr ""

#: gnu-v3-abi.c:1110
#, possible-c-format
msgid "cannot find typeinfo for object of type '%s'"
msgstr ""

#: gnu-v3-abi.c:1123
#, possible-c-format
msgid "could not find typeinfo symbol for '%s'"
msgstr ""

#: gnu-v3-abi.c:1146
#, possible-c-format
msgid "could not find minimal symbol for typeinfo address %s"
msgstr ""

#: gnu-v3-abi.c:1154
#, possible-c-format
msgid "typeinfo symbol '%s' has unexpected name"
msgstr ""

#: go-exp.y:1357
#, possible-c-format
msgid "Unknown function in `unsafe' package: %s"
msgstr ""

#: go-valprint.c:60
msgid "Unable to read string address"
msgstr ""

#: go-valprint.c:64
msgid "Unable to read string length"
msgstr ""

#: go-valprint.c:75
#, possible-c-format
msgid "<invalid length: %ps>"
msgstr ""

#: go32-nat.c:388
msgid ""
"You cannot attach to a running program on this platform.\n"
"Use the `run' command to run DJGPP programs."
msgstr ""

#: go32-nat.c:551
#, possible-c-format
msgid "Invalid register no. %d in fetch_register."
msgstr ""

#: go32-nat.c:581
#, possible-c-format
msgid "Invalid register no. %d in store_register."
msgstr ""

#: go32-nat.c:707 go32-nat.c:2102
msgid "Cannot allocate redirection storage: not enough memory.\n"
msgstr ""

#: go32-nat.c:716
msgid "Syntax error in command line."
msgstr ""

#: go32-nat.c:725
msgid "Command line too long."
msgstr ""

#: go32-nat.c:748
#, possible-c-format
msgid "Load failed for image %s"
msgstr ""

#: go32-nat.c:811
#, possible-c-format
msgid "Invalid register %d in go32_set_dr.\n"
msgstr ""

#: go32-nat.c:852
#, possible-c-format
msgid "Invalid register %d in go32_get_dr.\n"
msgstr ""

#: go32-nat.c:944
#, possible-c-format
msgid "Cannot redirect standard handles for program: %s."
msgstr ""

#: go32-nat.c:978
#, possible-c-format
msgid "Cannot redirect standard handles for debugger: %s."
msgstr ""

#: go32-nat.c:1702
#, possible-c-format
msgid "Invalid LDT entry 0x%03lx."
msgstr ""

#: go32-nat.c:1740
#, possible-c-format
msgid "Invalid LDT entry %#lx: outside valid limits [0..%#x]"
msgstr ""

#: go32-nat.c:1770
#, possible-c-format
msgid "Invalid GDT entry 0x%03lx: not an integral multiple of 8."
msgstr ""

#: go32-nat.c:1782
#, possible-c-format
msgid "Invalid GDT entry %#lx: outside valid limits [0..%#x]"
msgstr ""

#: go32-nat.c:1811
#, possible-c-format
msgid "Invalid (negative) IDT entry %ld."
msgstr ""

#: go32-nat.c:1823
#, possible-c-format
msgid "Invalid IDT entry %#lx: outside valid limits [0..%#x]"
msgstr ""

#: go32-nat.c:1981 go32-nat.c:2031
#, possible-c-format
msgid "Entry %ld is outside valid limits [0..1023]."
msgstr ""

#: go32-nat.c:2058
msgid "linear address"
msgstr ""

#: go32-nat.c:2108
msgid "Print information specific to DJGPP (aka MS-DOS) debugging."
msgstr ""

#: go32-nat.c:2112
msgid ""
"Display information about the target system, including CPU, OS, DPMI, etc."
msgstr ""

#: go32-nat.c:2115
msgid ""
"Display entries in the LDT (Local Descriptor Table).\n"
"Entry number (an expression) as an argument means display only that entry."
msgstr ""

#: go32-nat.c:2119
msgid ""
"Display entries in the GDT (Global Descriptor Table).\n"
"Entry number (an expression) as an argument means display only that entry."
msgstr ""

#: go32-nat.c:2123
msgid ""
"Display entries in the IDT (Interrupt Descriptor Table).\n"
"Entry number (an expression) as an argument means display only that entry."
msgstr ""

#: go32-nat.c:2127
msgid ""
"Display entries in the Page Directory.\n"
"Entry number (an expression) as an argument means display only that entry."
msgstr ""

#: go32-nat.c:2131
msgid ""
"Display entries in Page Tables.\n"
"Entry number (an expression) as an argument means display only entries\n"
"from the Page Table pointed to by the specified Page Directory entry."
msgstr ""

#: go32-nat.c:2136
msgid ""
"Display a Page Table entry for a linear address.\n"
"The address argument must be a linear address, after adding to\n"
"it the base address of the appropriate segment.\n"
"The base address of variables and functions in the debuggee's data\n"
"or code segment is stored in the variable __djgpp_base_address,\n"
"so use `__djgpp_base_address + (char *)&var' as the argument.\n"
"For other segments, look up their base address in the output of\n"
"the `info dos ldt' command."
msgstr ""

#: guile/scm-ports.c:464
msgid "output port"
msgstr ""

#: guile/scm-ports.c:466
msgid "thunk"
msgstr ""

#: guile/scm-ports.c:592
msgid "error reading memory"
msgstr ""

#: guile/scm-ports.c:615
msgid "overflow in offset calculation"
msgstr ""

#: guile/scm-ports.c:627
msgid "bad offset"
msgstr ""

#: guile/scm-ports.c:652 guile/scm-ports.c:678
msgid "writing beyond end of memory range"
msgstr ""

#: guile/scm-ports.c:657 guile/scm-ports.c:685 guile/scm-ports.c:717
msgid "error writing memory"
msgstr ""

#: guile/scm-ports.c:813
msgid "bad seek"
msgstr ""

#: guile/scm-ports.c:901 guile/scm-ports.c:914
msgid "bad mode string"
msgstr ""

#: guile/scm-ports.c:1003
msgid "port is unbuffered: ~a"
msgstr ""

#: guile/scm-ports.c:1012
msgid "read buffer not empty: ~a"
msgstr ""

#: guile/scm-ports.c:1019
msgid "write buffer not empty: ~a"
msgstr ""

#: guile/scm-ports.c:1103 guile/scm-disasm.c:233
msgid "start+size overflows"
msgstr ""

#: guile/scm-ports.c:1179 guile/scm-ports.c:1221 guile/scm-breakpoint.c:666
#: guile/scm-breakpoint.c:707 guile/scm-type.c:1109 guile/scm-param.c:762
msgid "integer"
msgstr ""

#: guile/scm-cmd.c:244
msgid "<gdb:command>"
msgstr ""

#: guile/scm-cmd.c:306
msgid "Could not convert arguments to Scheme string."
msgstr ""

#: guile/scm-cmd.c:327
msgid "Error occurred in Scheme-implemented GDB command."
msgstr ""

#. Inform the user, but otherwise ignore the entire result.
#: guile/scm-cmd.c:359
msgid "Bad text from completer: "
msgstr ""

#: guile/scm-cmd.c:396
msgid "Could not convert \"text\" argument to Scheme string."
msgstr ""

#: guile/scm-cmd.c:400
msgid "Could not convert \"word\" argument to Scheme string."
msgstr ""

#. Inform the user, but otherwise ignore.
#: guile/scm-cmd.c:450
msgid "Bad completer result: "
msgstr ""

#: guile/scm-cmd.c:490 guile/scm-cmd.c:696
msgid "no command name found"
msgstr ""

#: guile/scm-cmd.c:518
#, possible-c-format
msgid "could not find command prefix '%s'"
msgstr ""

#: guile/scm-cmd.c:534
#, possible-c-format
msgid "'%s' is not a prefix command"
msgstr ""

#: guile/scm-cmd.c:682 guile/scm-param.c:244 python/py-param.c:342
#: python/py-cmd.c:534
msgid "This command is not documented."
msgstr ""

#: guile/scm-cmd.c:702 guile/scm-pretty-print.c:158 guile/scm-iterator.c:162
#: guile/scm-param.c:915 guile/scm-param.c:920
msgid "procedure"
msgstr ""

#: guile/scm-cmd.c:709 guile/scm-param.c:894
msgid "invalid command class argument"
msgstr ""

#: guile/scm-cmd.c:716
msgid "integer or procedure"
msgstr ""

#: guile/scm-cmd.c:722
msgid "invalid completion type argument"
msgstr ""

#: guile/scm-cmd.c:751
msgid "command is already registered"
msgstr ""

#: guile/scm-lazy-string.c:162 guile/scm-value.c:1085
msgid "invalid length"
msgstr ""

#: guile/scm-lazy-string.c:169
msgid "cannot create a lazy string with address 0x0, and a non-zero length"
msgstr ""

#: guile/scm-lazy-string.c:176
msgid "a lazy string's type cannot be NULL"
msgstr ""

#: guile/scm-lazy-string.c:308
msgid "cannot create a value from NULL"
msgstr ""

#: guile/scm-utils.c:205 guile/scm-value.c:618 guile/scm-pretty-print.c:156
#: guile/scm-type.c:986 guile/scm-type.c:1027 guile/scm-param.c:514
#: guile/scm-param.c:701
msgid "string"
msgstr ""

#: guile/scm-utils.c:215 guile/scm-breakpoint.c:589 guile/scm-breakpoint.c:628
#: guile/scm-param.c:722
msgid "boolean"
msgstr ""

#: guile/scm-utils.c:224
msgid "int"
msgstr ""

#: guile/scm-utils.c:233
msgid "unsigned int"
msgstr ""

#: guile/scm-utils.c:242
msgid "long"
msgstr ""

#: guile/scm-utils.c:251
msgid "unsigned long"
msgstr ""

#: guile/scm-utils.c:260
msgid "LONGEST"
msgstr ""

#: guile/scm-utils.c:269
msgid "ULONGEST"
msgstr ""

#: guile/scm-utils.c:389
msgid "Unrecognized keyword: ~a"
msgstr ""

#: guile/scm-utils.c:397
msgid "Missing value for keyword argument"
msgstr ""

#: guile/scm-utils.c:442
msgid "Too many arguments"
msgstr ""

#: guile/scm-frame.c:326
msgid "inferior"
msgstr ""

#: guile/scm-frame.c:329
msgid "inferior has changed"
msgstr ""

#: guile/scm-frame.c:444 guile/scm-frame.c:483 guile/scm-frame.c:514
#: guile/scm-frame.c:546 guile/scm-frame.c:582 guile/scm-frame.c:616
#: guile/scm-frame.c:668 guile/scm-frame.c:706 guile/scm-frame.c:744
#: guile/scm-frame.c:781 guile/scm-frame.c:829 guile/scm-frame.c:877
#: guile/scm-frame.c:980
msgid "<gdb:frame>"
msgstr ""

#: guile/scm-frame.c:626
msgid "cannot find block for frame"
msgstr ""

#: guile/scm-frame.c:835
msgid "unknown register"
msgstr ""

#: guile/scm-frame.c:931
msgid "variable not found"
msgstr ""

#: guile/scm-frame.c:937
msgid "gdb:symbol or string"
msgstr ""

#: guile/scm-frame.c:1019
msgid "No frame is currently selected"
msgstr ""

#: guile/scm-disasm.c:209
msgid "input port"
msgstr ""

#: guile/scm-disasm.c:219
msgid "offset provided but port is missing"
msgstr ""

#: guile/scm-symtab.c:268
msgid "<gdb:symtab>"
msgstr ""

#: guile/scm-symtab.c:515
msgid "<gdb:sal>"
msgstr ""

#: guile/scm-block.c:279 guile/scm-block.c:305
msgid "<gdb:block>"
msgstr ""

#: guile/scm-block.c:700
msgid "cannot locate object file for block"
msgstr ""

#: guile/scm-breakpoint.c:323
msgid "<gdb:breakpoint>"
msgstr ""

#: guile/scm-breakpoint.c:373
msgid "access type with breakpoint is not allowed"
msgstr ""

#: guile/scm-breakpoint.c:386
msgid "invalid watchpoint class"
msgstr ""

#: guile/scm-breakpoint.c:392
msgid "invalid breakpoint type"
msgstr ""

#: guile/scm-breakpoint.c:419
msgid "not a Scheme breakpoint"
msgstr ""

#: guile/scm-breakpoint.c:422
msgid "breakpoint is already registered"
msgstr ""

#: guile/scm-breakpoint.c:716
msgid "hit-count must be zero"
msgstr ""

#: guile/scm-breakpoint.c:753
msgid "invalid thread id"
msgstr ""

#: guile/scm-breakpoint.c:759 guile/scm-breakpoint.c:814
msgid "integer or #f"
msgstr ""

#: guile/scm-breakpoint.c:808
msgid "invalid task id"
msgstr ""

#: guile/scm-breakpoint.c:899
msgid "string or #f"
msgstr ""

#: guile/scm-breakpoint.c:938
msgid "procedure or #f"
msgstr ""

#: guile/scm-value.c:464
msgid ""
"Trying to get the referenced value from a value which is neither a pointer "
"nor a reference"
msgstr ""

#: guile/scm-value.c:669
msgid "Cannot subscript requested type"
msgstr ""

#: guile/scm-value.c:702
msgid "function (value of TYPE_CODE_FUNC)"
msgstr ""

#: guile/scm-value.c:705 guile/scm-pretty-print.c:255 guile/scm-param.c:494
#: guile/scm-progspace.c:330 guile/scm-objfile.c:290
msgid "list"
msgstr ""

#: guile/scm-value.c:814 guile/scm-value.c:858
msgid "integer-like gdb value"
msgstr ""

#: guile/scm-value.c:906
msgid "number"
msgstr ""

#: guile/scm-value.c:935
msgid "number can't be converted to a double"
msgstr ""

#: guile/scm-value.c:997
msgid "invalid error kind"
msgstr ""

#: guile/scm-value.c:1122
msgid "length is larger than array size"
msgstr ""

#: guile/scm-math.c:540 guile/scm-math.c:555
msgid "value out of range for type"
msgstr ""

#: guile/scm-math.c:645
msgid "value not a number representable on the target"
msgstr ""

#: guile/scm-math.c:679
msgid "size of type does not match size of bytevector"
msgstr ""

#: guile/scm-math.c:734 guile/scm-math.c:785 guile/scm-math.c:810
msgid "No type allowed"
msgstr ""

#: guile/scm-pretty-print.c:370 guile/scm-pretty-print.c:415
msgid "pretty-printer list is not a list"
msgstr ""

#: guile/scm-pretty-print.c:382
msgid "pretty-printer list contains non-pretty-printer object"
msgstr ""

#: guile/scm-pretty-print.c:395
msgid "invalid lookup object in pretty-printer matcher"
msgstr ""

#: guile/scm-pretty-print.c:408
msgid "invalid result from pretty-printer lookup"
msgstr ""

#: guile/scm-pretty-print.c:558
msgid "invalid result from pretty-printer to-string"
msgstr ""

#: guile/scm-pretty-print.c:620 python/py-prettyprint.c:264 valprint.c:1090
msgid "<error reading variable>"
msgstr ""

#: guile/scm-pretty-print.c:741
msgid "pretty-printer \"children\" object is not a procedure or #f"
msgstr ""

#: guile/scm-pretty-print.c:764
msgid ""
"result of pretty-printer \"children\" procedure is not a <gdb:iterator> "
"object"
msgstr ""

#: guile/scm-pretty-print.c:804
msgid ""
"result of pretty-printer children iterator is not a pair or (end-of-"
"iteration)"
msgstr ""

#: guile/scm-pretty-print.c:814
msgid "first element of pretty-printer children iterator is not a string"
msgstr ""

#: guile/guile.c:177 guile/guile.c:371
msgid "guile-repl currently does not take any arguments."
msgstr ""

#: guile/guile.c:254
msgid "Invalid \"guile\" block structure."
msgstr ""

#: guile/guile.c:372 guile/guile.c:380
msgid "Guile scripting is not supported in this copy of GDB."
msgstr ""

#: guile/guile.c:422
msgid "\"info guile\" must be followed by the name of an info command.\n"
msgstr ""

#: guile/guile.c:527
msgid "Error in function ~s:~%"
msgstr ""

#: guile/guile.c:551
msgid "Throw to key `~a' with args `~s'.~%"
msgstr ""

#: guile/guile.c:566
#, possible-c-format
msgid ""
"Could not complete Guile gdb module initialization from:\n"
"%s.\n"
"Limited Guile support is available.\n"
"Suggest passing --data-directory=/path/to/gdb/data-directory."
msgstr ""

#: guile/guile.c:713
msgid ""
"Start an interactive Guile prompt.\n"
"\n"
"To return to GDB, type the EOF character (e.g., Ctrl-D on an empty\n"
"prompt) or ,quit."
msgstr ""

#: guile/guile.c:719
msgid ""
"Start a Guile interactive prompt.\n"
"\n"
"Guile scripting is not supported in this copy of GDB.\n"
"This command is only a placeholder."
msgstr ""

#: guile/guile.c:732
msgid ""
"Evaluate one or more Guile expressions.\n"
"\n"
"The expression(s) can be given as an argument, for instance:\n"
"\n"
"    guile (display 23)\n"
"\n"
"The result of evaluating the last expression is printed.\n"
"\n"
"If no argument is given, the following lines are read and passed\n"
"to Guile for evaluation.  Type a line containing \"end\" to indicate\n"
"the end of the set of expressions.\n"
"\n"
"The Guile GDB module must first be imported before it can be used.\n"
"Do this with:\n"
"(gdb) guile (use-modules (gdb))\n"
"or if you want to import the (gdb) module with a prefix, use:\n"
"(gdb) guile (use-modules ((gdb) #:renamer (symbol-prefix-proc 'gdb:)))\n"
"\n"
"The Guile interactive session, started with the \"guile-repl\"\n"
"command, provides extensive help and apropos capabilities.\n"
"Type \",help\" once in a Guile interactive session."
msgstr ""

#: guile/guile.c:755
msgid ""
"Evaluate a Guile expression.\n"
"\n"
"Guile scripting is not supported in this copy of GDB.\n"
"This command is only a placeholder."
msgstr ""

#: guile/guile.c:765 guile/guile.c:771
msgid "Prefix command for Guile preference settings."
msgstr ""

#: guile/guile.c:777
msgid "Prefix command for Guile info displays."
msgstr ""

#: guile/guile.c:785
msgid "Set mode for Guile exception printing on error."
msgstr ""

#: guile/guile.c:786
msgid "Show the mode of Guile exception printing on error."
msgstr ""

#: guile/guile.c:787 python/python.c:1797
msgid ""
"none  == no stack or message will be printed.\n"
"full == a message and a stack will be printed.\n"
"message == an error message without a stack will be printed."
msgstr ""

#: guile/scm-exception.c:244
#, possible-c-format
msgid "Wrong type argument in position %d (expecting %s): ~S"
msgstr ""

#: guile/scm-exception.c:250
#, possible-c-format
msgid "Wrong type argument in position %d: ~S"
msgstr ""

#: guile/scm-exception.c:258
#, possible-c-format
msgid "Wrong type argument (expecting %s): ~S"
msgstr ""

#: guile/scm-exception.c:262
msgid "Wrong type argument: ~S"
msgstr ""

#: guile/scm-exception.c:289
#, possible-c-format
msgid "%s %s in position %d: ~S"
msgstr ""

#: guile/scm-exception.c:293
#, possible-c-format
msgid "%s %s: ~S"
msgstr ""

#: guile/scm-exception.c:298
#, possible-c-format
msgid "%s in position %d: ~S"
msgstr ""

#: guile/scm-exception.c:300
#, possible-c-format
msgid "%s: ~S"
msgstr ""

#: guile/scm-exception.c:318
msgid "Invalid object:"
msgstr ""

#: guile/scm-exception.c:342
msgid "Out of range:"
msgstr ""

#. Handle this specially to be consistent with top-repl.scm.
#: guile/scm-exception.c:438
msgid "User interrupt"
msgstr ""

#: guile/scm-exception.c:494 guile/scm-exception.c:545
#, possible-c-format
msgid "Error in Scheme exception printing, can't find %s.\n"
msgstr ""

#: guile/scm-exception.c:508 guile/scm-exception.c:559
msgid "Error in Scheme exception printing:\n"
msgstr ""

#: guile/scm-type.c:71
msgid "type is not a structure, union, or enum type"
msgstr ""

#: guile/scm-type.c:730 python/py-type.c:517
msgid "Array length must not be negative"
msgstr ""

#: guile/scm-type.c:823
msgid "ranged type"
msgstr ""

#: guile/scm-type.c:1013
msgid "Unknown field"
msgstr ""

#: guile/scm-type.c:1167
msgid "enum type"
msgstr ""

#: guile/scm-type.c:1184
msgid "non-enum type"
msgstr ""

#: guile/scm-symbol.c:275
msgid "<gdb:symbol>"
msgstr ""

#: guile/scm-symbol.c:540
msgid "cannot get the value of a typedef"
msgstr ""

#: guile/scm-symbol.c:550
msgid "Invalid frame"
msgstr ""

#: guile/scm-symbol.c:554
msgid "Symbol requires a frame to compute its value"
msgstr ""

#: guile/scm-symbol.c:612 valops.c:3763
msgid "no frame selected"
msgstr ""

#. Set this now in case an exception is thrown.
#: guile/scm-safe-call.c:180
msgid "Error while executing Scheme code."
msgstr ""

#: guile/scm-gsmob.c:151
msgid "any gdb smob"
msgstr ""

#: guile/scm-param.c:289
msgid "Error occurred setting parameter."
msgstr ""

#: guile/scm-param.c:293
#, possible-c-format
msgid "Result of %s set-func is not a string."
msgstr ""

#: guile/scm-param.c:300 guile/scm-param.c:344
msgid "Error converting show text to host string."
msgstr ""

#: guile/scm-param.c:325
#, possible-c-format
msgid "Error converting parameter value \"%s\" to Scheme string."
msgstr ""

#: guile/scm-param.c:336
msgid "Error occurred showing parameter."
msgstr ""

#: guile/scm-param.c:500
msgid "enumeration list is empty"
msgstr ""

#: guile/scm-param.c:651
msgid "program error: unhandled type"
msgstr ""

#: guile/scm-param.c:673
msgid "string or #f for non-PARAM_FILENAME parameters"
msgstr ""

#: guile/scm-param.c:714
msgid "not member of enumeration"
msgstr ""

#: guile/scm-param.c:730
msgid "boolean or #:auto"
msgstr ""

#: guile/scm-param.c:749
msgid "integer or #:unlimited"
msgstr ""

#: guile/scm-param.c:781
msgid "must be >= -1"
msgstr ""

#: guile/scm-param.c:900
msgid "invalid parameter type argument"
msgstr ""

#: guile/scm-param.c:905
msgid "#:enum-values can only be provided with PARAM_ENUM"
msgstr ""

#: guile/scm-param.c:910
msgid "PARAM_ENUM requires an enum-values argument"
msgstr ""

#: guile/scm-param.c:991
msgid "parameter is already registered"
msgstr ""

#: guile/scm-param.c:1004
msgid "parameter exists, \"set\" command is already defined"
msgstr ""

#: guile/scm-param.c:1009
msgid "parameter exists, \"show\" command is already defined"
msgstr ""

#: guile/scm-param.c:1048
msgid "<gdb:parameter> or string"
msgstr ""

#: guile/scm-param.c:1085
msgid "parameter not found"
msgstr ""

#: guile/scm-param.c:1090
msgid "not a parameter"
msgstr ""

#: guile/scm-progspace.c:233
msgid "<gdb:progspace>"
msgstr ""

#: guile/scm-objfile.c:222
msgid "<gdb:objfile>"
msgstr ""

#: guile/scm-auto-load.c:41
#, possible-c-format
msgid "Auto-loading of Guile scripts is %s.\n"
msgstr ""

#: guile/scm-auto-load.c:65
msgid "Set the debugger's behaviour regarding auto-loaded Guile scripts."
msgstr ""

#: guile/scm-auto-load.c:66
msgid "Show the debugger's behaviour regarding auto-loaded Guile scripts."
msgstr ""

#: guile/scm-auto-load.c:67
msgid ""
"If enabled, auto-loaded Guile scripts are loaded when the debugger reads\n"
"an executable or shared library.\n"
"This options has security implications for untrusted inferiors."
msgstr ""

#: guile/scm-auto-load.c:76
msgid ""
"Print the list of automatically loaded Guile scripts.\n"
"Usage: info auto-load guile-scripts [REGEXP]"
msgstr ""

#: h8300-tdep.c:751 h8300-tdep.c:783
msgid "I don't know how this 8 byte value is returned."
msgstr ""

#. long long, double and long double
#. are all defined as 4 byte types so
#. far so this shouldn't happen.
#: h8300-tdep.c:846
msgid "I don't know how to return an 8 byte value."
msgstr ""

#: h8300-tdep.c:938
#, possible-c-format
msgid "h8300_register_name_common: illegal register number %d"
msgstr ""

#: h8300-tdep.c:1125
#, possible-c-format
msgid "h8300_register_type: illegal register number %d"
msgstr ""

#: hppa-linux-nat.c:168 ia64-linux-nat.c:351
#, possible-c-format
msgid "Invalid register number %d."
msgstr ""

#: hppa-linux-nat.c:242 i386-linux-nat.c:125 ia64-linux-nat.c:792
#: linux-nat-trad.c:63 m68k-linux-nat.c:133
#, possible-c-format
msgid "Couldn't read register %s (#%d): %s."
msgstr ""

#: hppa-linux-nat.c:267 i386-linux-nat.c:151 ia64-linux-nat.c:847
#: linux-nat-trad.c:124 m68k-linux-nat.c:186
#, possible-c-format
msgid "Couldn't write register %s (#%d): %s."
msgstr ""

#: hppa-tdep.c:514
msgid "Internal error reading unwind information."
msgstr ""

#: hppa-tdep.c:1995
#, possible-c-format
msgid "Cannot read instruction at %s."
msgstr ""

#: hppa-tdep.c:2475
msgid "Requesting registers from null frame."
msgstr ""

#: hppa-tdep.c:2979
#, possible-c-format
msgid "Cannot resolve PLT stub at %s."
msgstr ""

#: hppa-tdep.c:3078
#, possible-c-format
msgid "Unsupported address size: %d"
msgstr ""

#: hppa-tdep.c:3177
msgid "Print unwind table entry at given address."
msgstr ""

#. Debug this files internals.
#: hppa-tdep.c:3181
msgid ""
"Set whether hppa target specific debugging information should be displayed."
msgstr ""

#: hppa-tdep.c:3183
msgid "Show whether hppa target specific debugging information is displayed."
msgstr ""

#: hppa-tdep.c:3184
msgid ""
"This flag controls whether hppa target specific debugging information is\n"
"displayed.  This information is particularly useful for debugging frame\n"
"unwinding problems."
msgstr ""

#: i386-bsd-nat.c:303
msgid "Couldn't write XMM registers"
msgstr ""

#: i386-bsd-nat.c:361
#, possible-c-format
msgid ""
"offsetof (struct sigcontext, sc_pc) yields %d instead of %d.\n"
"Please report this to <bug-gdb@gnu.org>."
msgstr ""

#: i386-bsd-nat.c:374
#, possible-c-format
msgid ""
"offsetof (struct sigcontext, sc_sp) yields %d instead of %d.\n"
"Please report this to <bug-gdb@gnu.org>."
msgstr ""

#: i386-bsd-nat.c:387
#, possible-c-format
msgid ""
"offsetof (struct sigcontext, sc_fp) yields %d instead of %d.\n"
"Please report this to <bug-gdb@gnu.org>."
msgstr ""

#: i386-darwin-nat.c:80 i386-darwin-nat.c:129
#, possible-c-format
msgid "Error calling thread_get_state for GP registers for thread 0x%lx\n"
msgstr ""

#: i386-darwin-nat.c:105 i386-darwin-nat.c:153
#, possible-c-format
msgid "Error calling thread_get_state for float registers for thread 0x%lx\n"
msgstr ""

#: i386-darwin-nat.c:165
#, possible-c-format
msgid "unknown register %d"
msgstr ""

#: i386-darwin-nat.c:592
#, possible-c-format
msgid "darwin_set_sstep: error %x, thread=%x\n"
msgstr ""

#: i386-darwin-nat.c:632
#, possible-c-format
msgid "darwin_set_sstep: unknown flavour: %d"
msgstr ""

#: i386-fbsd-tdep.c:249 i386-linux-tdep.c:662
msgid "Couldn't read `xcr0' bytes from `.reg-xstate' section in core file."
msgstr ""

#: i386-fbsd-tdep.c:333 i386-fbsd-tdep.c:341
#, possible-c-format
msgid "Unable to fetch %%gsbase"
msgstr ""

#: i386-gnu-nat.c:90 i386-gnu-nat.c:178
#, possible-c-format
msgid "Couldn't fetch floating-point state from %s"
msgstr ""

#: i386-gnu-nat.c:119
#, possible-c-format
msgid "Can't fetch registers from thread %s: No such thread"
msgstr ""

#: i386-gnu-nat.c:130
#, possible-c-format
msgid "Couldn't fetch registers from %s"
msgstr ""

#: i386-gnu-nat.c:191
#, possible-c-format
msgid "Couldn't store floating-point state into %s"
msgstr ""

#: i386-gnu-nat.c:210
#, possible-c-format
msgid "Couldn't store registers into thread %s: No such thread"
msgstr ""

#: i386-gnu-nat.c:227
#, possible-c-format
msgid "Couldn't store registers into %s"
msgstr ""

#: i386-gnu-nat.c:248
#, possible-c-format
msgid "Register %s changed after the thread was aborted"
msgstr ""

#: i386-gnu-nat.c:255
msgid "... also writing this register!  Suspicious..."
msgstr ""

#: i386-gnu-nat.c:307
#, possible-c-format
msgid "Couldn't fetch debug state from %s"
msgstr ""

#: i386-gnu-nat.c:321
#, possible-c-format
msgid "Couldn't store debug state into %s"
msgstr ""

#: i386-linux-nat.c:343 i386-linux-nat.c:366
msgid "Couldn't read extended state status"
msgstr ""

#: i386-linux-nat.c:399 i386-linux-nat.c:426
msgid "Couldn't read floating-point and SSE registers"
msgstr ""

#: i386-linux-nat.c:432
msgid "Couldn't write floating-point and SSE registers"
msgstr ""

#: i386-linux-nat.c:531 m32r-linux-nat.c:217 m68k-linux-nat.c:449
#, possible-c-format
msgid "Got request for bad register number %d."
msgstr ""

#: i386-linux-nat.c:596 m32r-linux-nat.c:237 m68k-linux-nat.c:493
#, possible-c-format
msgid "Got request to store bad register number %d."
msgstr ""

#: i386-linux-tdep.c:430
msgid "Upper bound violation"
msgstr ""

#: i386-linux-tdep.c:432
msgid "Lower bound violation"
msgstr ""

#: i386-linux-tdep.c:434 sparc64-linux-tdep.c:152 sparc64-linux-tdep.c:158
#: sparc64-linux-tdep.c:164
msgid " while accessing address "
msgstr ""

#: i386-linux-tdep.c:437
msgid ""
"\n"
"Bounds: [lower = "
msgstr ""

#: i386-linux-tdep.c:440
msgid ", upper = "
msgstr ""

#: i386-linux-tdep.c:443
msgid "]"
msgstr ""

#: i386-tdep.c:2795
msgid "Cannot find floating-point return value."
msgstr ""

#: i386-tdep.c:2826 m68k-tdep.c:300
#, possible-c-format
msgid "Cannot extract return value of %d bytes long."
msgstr ""

#: i386-tdep.c:2848
msgid "Cannot set floating-point return value."
msgstr ""

#: i386-tdep.c:2891 m68k-tdep.c:340
#, possible-c-format
msgid "Cannot store return value of %d bytes long."
msgstr ""

#: i386-tdep.c:4912 i386-tdep.c:5820 i386-tdep.c:6489 i386-tdep.c:7039
#: i386-tdep.c:7091
#, possible-c-format
msgid ""
"Process record ignores the memory change of instruction at address %s\n"
"because it can't get the value of the segment register.\n"
"Do you want to stop the program?"
msgstr ""

#. XXX
#. int3
#: i386-tdep.c:6828
msgid "Process record does not support instruction int3.\n"
msgstr ""

#: i386-tdep.c:6845
#, possible-c-format
msgid "Process record does not support instruction int 0x%02x.\n"
msgstr ""

#. XXX
#. into
#: i386-tdep.c:6859
msgid "Process record does not support instruction into.\n"
msgstr ""

#. bound
#: i386-tdep.c:6870
msgid "Process record does not support instruction bound.\n"
msgstr ""

#. wrmsr
#: i386-tdep.c:6906
msgid "Process record does not support instruction wrmsr.\n"
msgstr ""

#. rdmsr
#: i386-tdep.c:6913
msgid "Process record does not support instruction rdmsr.\n"
msgstr ""

#: i386-tdep.c:6934
msgid "Process record does not support instruction sysenter.\n"
msgstr ""

#. sysexit
#: i386-tdep.c:6946
msgid "Process record does not support instruction sysexit.\n"
msgstr ""

#: i386-tdep.c:6957
msgid "Process record does not support instruction syscall.\n"
msgstr ""

#. sysret
#: i386-tdep.c:6969
msgid "Process record does not support instruction sysret.\n"
msgstr ""

#. hlt
#: i386-tdep.c:6983
msgid "Process record does not support instruction hlt.\n"
msgstr ""

#: i386-tdep.c:8102
#, possible-c-format
msgid "Process record does not support instruction 0x%02x at address %s.\n"
msgstr ""

#: i386-tdep.c:8163
#, possible-c-format
msgid ""
"; instruction is only %d bytes long, need at least %d bytes for the jump"
msgstr ""

#: i386-tdep.c:8798
#, possible-c-format
msgid "BNDCFGU register invalid, read status %d."
msgstr ""

#: i386-tdep.c:8844
msgid ""
"bound table examination not supported for 64-bit process with 32-bit GDB"
msgstr ""

#: i386-tdep.c:8862
#, possible-c-format
msgid "Invalid bounds directory entry at %s."
msgstr ""

#: i386-tdep.c:8938
msgid "Intel Memory Protection Extensions not supported on this target.\n"
msgstr ""

#: i386-tdep.c:8945
msgid "Address of pointer variable expected.\n"
msgstr ""

#: i386-tdep.c:8981
msgid "Intel Memory Protection Extensions not supported on this target."
msgstr ""

#: i386-tdep.c:8985
msgid "Pointer value expected."
msgstr ""

#: i386-tdep.c:8992
msgid "wrong number of arguments: missing lower and upper bound."
msgstr ""

#: i386-tdep.c:8998
msgid "Wrong number of arguments; Missing upper bound."
msgstr ""

#: i386-tdep.c:9042
msgid "Set the disassembly flavor."
msgstr ""

#: i386-tdep.c:9043
msgid "Show the disassembly flavor."
msgstr ""

#: i386-tdep.c:9044
msgid ""
"The valid values are \"att\" and \"intel\", and the default value is \"att\"."
msgstr ""

#: i386-tdep.c:9053
msgid "Set the convention for returning small structs."
msgstr ""

#: i386-tdep.c:9054
msgid "Show the convention for returning small structs."
msgstr ""

#: i386-tdep.c:9055
msgid ""
"Valid values are \"default\", \"pcc\" and \"reg\", and the default value\n"
"is \"default\"."
msgstr ""

#. Add "mpx" prefix for the set commands.
#: i386-tdep.c:9064
msgid "Set Intel Memory Protection Extensions specific variables."
msgstr ""

#. allow-unknown
#. Add "mpx" prefix for the show commands.
#: i386-tdep.c:9071
msgid "Show Intel Memory Protection Extensions specific variables."
msgstr ""

#: i387-tdep.c:111 i387-tdep.c:149 i387-tdep.c:297 i387-tdep.c:307
#: i387-tdep.c:309 i387-tdep.c:311 i387-tdep.c:313 i387-tdep.c:315
#: i387-tdep.c:319 tui/tui-stack.c:331 valprint.c:386
msgid "<unavailable>"
msgstr ""

#: i387-tdep.c:360
msgid ""
"Cannot convert floating-point register value to non-floating-point type."
msgstr ""

#: i387-tdep.c:392 m68k-tdep.c:237
msgid ""
"Cannot convert non-floating-point type to floating-point register value."
msgstr ""

#: i387-tdep.c:1408
#, possible-c-format
msgid "invalid i387 regnum %d"
msgstr ""

#: i387-tdep.c:1682
msgid "invalid i387 regclass"
msgstr ""

#: ia64-libunwind-tdep.c:236
msgid "Can't get libunwind sp register."
msgstr ""

#: ia64-libunwind-tdep.c:523 ia64-libunwind-tdep.c:526
#, possible-c-format
msgid "[GDB failed to load %s: %s]\n"
msgstr ""

#: ia64-tdep.c:535
msgid ""
"Can't fetch instructions for slot numbers greater than 2.\n"
"Using slot 0 instead"
msgstr ""

#: ia64-tdep.c:650 ia64-tdep.c:831
msgid "Can't insert breakpoint for slot numbers greater than 2."
msgstr ""

#: ia64-tdep.c:681 ia64-tdep.c:861
msgid "Can't insert breakpoint for non-existing slot X"
msgstr ""

#: ia64-tdep.c:717
#, possible-c-format
msgid "Address %s already contains a breakpoint."
msgstr ""

#: ia64-tdep.c:764
#, possible-c-format
msgid ""
"Cannot remove breakpoint at address %s from non-existing X-type slot, memory "
"has changed underneath"
msgstr ""

#: ia64-tdep.c:783
#, possible-c-format
msgid ""
"Cannot remove breakpoint at address %s, no break instruction at such address."
msgstr ""

#: inf-child.c:44
msgid "Native process"
msgstr ""

#: inf-child.c:45
msgid "Native process (started by the \"run\" command)."
msgstr ""

#: inf-child.c:181
msgid "Argument given to \"disconnect\"."
msgstr ""

#: inf-loop.c:90
msgid "Event type not recognized.\n"
msgstr ""

#: inf-ptrace.c:229
msgid "This system does not support attaching to a process"
msgstr ""

#: inf-ptrace.c:283
msgid "This system does not support detaching from a process"
msgstr ""

#: inf-ptrace.c:401 obsd-nat.c:98 rs6000-nat.c:519
#, possible-c-format
msgid "Child process unexpectedly missing: %s.\n"
msgstr ""

#: inf-ptrace.c:626
#, possible-c-format
msgid "\tUsing the running image of %s %s.\n"
msgstr ""

#: infcall.c:65
#, possible-c-format
msgid "Permission to call functions in the program is %s.\n"
msgstr ""

#: infcall.c:95
#, possible-c-format
msgid "Coercion of floats to doubles when calling functions is %s.\n"
msgstr ""

#: infcall.c:113
#, possible-c-format
msgid ""
"Unwinding of stack if a signal is received while in a call dummy is %s.\n"
msgstr ""

#: infcall.c:139
#, possible-c-format
msgid ""
"Unwind stack if a C++ exception is unhandled while in a call dummy is %s.\n"
msgstr ""

#: infcall.c:335
msgid "Invalid data type for function to be called."
msgstr ""

#: infcall.c:369 infcall.c:794
#, possible-c-format
msgid "'%s' has unknown return type; cast the call to its declared return type"
msgstr ""

#: infcall.c:373
msgid ""
"function has unknown return type; cast the call to its declared return type"
msgstr ""

#: infcall.c:757
msgid "Cannot call functions in the program: may-call-functions is off."
msgstr ""

#: infcall.c:764
msgid "May not call functions while looking at trace frames."
msgstr ""

#: infcall.c:767
msgid "Cannot call functions in reverse mode."
msgstr ""

#: infcall.c:781
msgid "This target does not support function calls."
msgstr ""

#: infcall.c:802
msgid "Too few arguments in function call."
msgstr ""

#: infcall.c:1218
#, possible-c-format
msgid ""
"%s\n"
"An error occurred while in a function called from GDB.\n"
"Evaluation of the expression containing the function\n"
"(%s) will be abandoned.\n"
"When the function is done executing, GDB will silently stop."
msgstr ""

#. We could discard the dummy frame here given that the program exited,
#. but it will get garbage collected the next time the program is
#. run anyway.
#: infcall.c:1246
#, possible-c-format
msgid ""
"The program being debugged exited while in a function called from GDB.\n"
"Evaluation of the expression containing the function\n"
"(%s) will be abandoned."
msgstr ""

#: infcall.c:1266
#, possible-c-format
msgid ""
"The program received a signal in another thread while\n"
"making a function call from GDB.\n"
"Evaluation of the expression containing the function\n"
"(%s) will be abandoned.\n"
"When the function is done executing, GDB will silently stop."
msgstr ""

#: infcall.c:1274
#, possible-c-format
msgid ""
"The program stopped in another thread while making a function call from "
"GDB.\n"
"Evaluation of the expression containing the function\n"
"(%s) will be abandoned.\n"
"When the function is done executing, GDB will silently stop."
msgstr ""

#. FIXME: Insert a bunch of wrap_here; name can be very
#. long if it's a C++ name with arguments and stuff.
#: infcall.c:1307
#, possible-c-format
msgid ""
"The program being debugged was signaled while in a function called from "
"GDB.\n"
"GDB has restored the context to what it was before the call.\n"
"To change this behavior use \"set unwindonsignal off\".\n"
"Evaluation of the expression containing the function\n"
"(%s) will be abandoned."
msgstr ""

#. FIXME: Insert a bunch of wrap_here; name can be very
#. long if it's a C++ name with arguments and stuff.
#: infcall.c:1325
#, possible-c-format
msgid ""
"The program being debugged was signaled while in a function called from "
"GDB.\n"
"GDB remains in the frame where the signal was received.\n"
"To change this behavior use \"set unwindonsignal on\".\n"
"Evaluation of the expression containing the function\n"
"(%s) will be abandoned.\n"
"When the function is done executing, GDB will silently stop."
msgstr ""

#: infcall.c:1346
#, possible-c-format
msgid ""
"The program being debugged entered a std::terminate call, most likely\n"
"caused by an unhandled C++ exception.  GDB blocked this call in order\n"
"to prevent the program from being terminated, and has restored the\n"
"context to its original state before the call.\n"
"To change this behaviour use \"set unwind-on-terminating-exception off\".\n"
"Evaluation of the expression containing the function (%s)\n"
"will be abandoned."
msgstr ""

#. The following error message used to say "The expression
#. which contained the function call has been discarded."
#. It is a hard concept to explain in a few words.  Ideally,
#. GDB would be able to resume evaluation of the expression
#. when the function finally is done executing.  Perhaps
#. someday this will be implemented (it would not be easy).
#. FIXME: Insert a bunch of wrap_here; name can be very long if it's
#. a C++ name with arguments and stuff.
#: infcall.c:1373
#, possible-c-format
msgid ""
"The program being debugged stopped while in a function called from GDB.\n"
"Evaluation of the expression containing the function\n"
"(%s) will be abandoned.\n"
"When the function is done executing, GDB will silently stop."
msgstr ""

#: infcall.c:1391
msgid "Set permission to call functions in the program."
msgstr ""

#: infcall.c:1392
msgid "Show permission to call functions in the program."
msgstr ""

#: infcall.c:1393
msgid ""
"When this permission is on, GDB may call functions in the program.\n"
"Otherwise, any sort of attempt to call a function in the program\n"
"will result in an error."
msgstr ""

#: infcall.c:1402
msgid "Set coercion of floats to doubles when calling functions."
msgstr ""

#: infcall.c:1403
msgid "Show coercion of floats to doubles when calling functions."
msgstr ""

#: infcall.c:1404
msgid ""
"Variables of type float should generally be converted to doubles before\n"
"calling an unprototyped function, and left alone when calling a prototyped\n"
"function.  However, some older debug info formats do not provide enough\n"
"information to determine that a function is prototyped.  If this flag is\n"
"set, GDB will perform the conversion for a function it considers\n"
"unprototyped.\n"
"The default is to perform the conversion."
msgstr ""

#: infcall.c:1417
msgid "Set unwinding of stack if a signal is received while in a call dummy."
msgstr ""

#: infcall.c:1418
msgid "Show unwinding of stack if a signal is received while in a call dummy."
msgstr ""

#: infcall.c:1419
msgid ""
"The unwindonsignal lets the user determine what gdb should do if a signal\n"
"is received while in a function called from gdb (call dummy).  If set, gdb\n"
"unwinds the stack and restore the context to what as it was before the "
"call.\n"
"The default is to stop in the frame where the signal was received."
msgstr ""

#: infcall.c:1429
msgid "Set unwinding of stack if std::terminate is called while in call dummy."
msgstr ""

#: infcall.c:1430
msgid ""
"Show unwinding of stack if std::terminate() is called while in a call dummy."
msgstr ""

#: infcall.c:1432
msgid ""
"The unwind on terminating exception flag lets the user determine\n"
"what gdb should do if a std::terminate() call is made from the\n"
"default exception handler.  If set, gdb unwinds the stack and restores\n"
"the context to what it was before the call.  If unset, gdb allows the\n"
"std::terminate call to proceed.\n"
"The default is to unwind the frame."
msgstr ""

#: infcmd.c:66 infcmd.c:2482 infcmd.c:2869 linux-fork.c:651 record-btrace.c:387
#: remote-sim.c:894
msgid "The program is not being run."
msgstr ""

#: infcmd.c:144
#, possible-c-format
msgid "Terminal for future runs of program being debugged is \"%s\".\n"
msgstr ""

#: infcmd.c:251
msgid ""
"You have not set the inferior's current working directory.\n"
"The inferior will inherit GDB's cwd if native debugging, or the remote\n"
"server's cwd if remote debugging.\n"
msgstr ""

#: infcmd.c:257
#, possible-c-format
msgid ""
"Current working directory that will be used when starting the inferior is "
"\"%s\".\n"
msgstr ""

#: infcmd.c:362
msgid "can't handle command-line argument containing whitespace"
msgstr ""

#: infcmd.c:468
msgid ""
"platform-specific solib_create_inferior_hook did not load initial shared "
"libraries."
msgstr ""

#: infcmd.c:508
msgid ""
"The program being debugged has been started already.\n"
"Start it from the beginning? "
msgstr ""

#: infcmd.c:510
msgid "Program not restarted."
msgstr ""

#: infcmd.c:523
msgid "Asynchronous execution not supported on this target."
msgstr ""

#: infcmd.c:592
msgid "The target does not support running in non-stop mode."
msgstr ""

#: infcmd.c:690
msgid "No symbol table loaded.  Use the \"file\" command."
msgstr ""

#: infcmd.c:731
msgid "Cannot execute this command without a live selected thread."
msgstr ""

#: infcmd.c:742
msgid "Cannot execute this command while looking at trace frames."
msgstr ""

#: infcmd.c:750
msgid "Cannot execute this command while the selected thread is running."
msgstr ""

#: infcmd.c:833
msgid "`-a' is meaningless in all-stop mode."
msgstr ""

#: infcmd.c:836
msgid "Can't resume all threads and specify proceed count simultaneously."
msgstr ""

#: infcmd.c:893
msgid "Continuing.\n"
msgstr ""

#: infcmd.c:1139 infcmd.c:1772
msgid "Cannot find bounds of current function"
msgstr ""

#: infcmd.c:1142
#, possible-c-format
msgid ""
"Single stepping until exit from function %s,\n"
"which has no line number information.\n"
msgstr ""

#: infcmd.c:1193
msgid "starting address"
msgstr ""

#: infcmd.c:1198
msgid "Unreasonable jump request"
msgstr ""

#: infcmd.c:1203
msgid "No source file has been specified."
msgstr ""

#: infcmd.c:1212
#, possible-c-format
msgid "Line %d is not in `%s'.  Jump anyway? "
msgstr ""

#: infcmd.c:1229
msgid "WARNING!!!  Destination is in unmapped overlay!  Jump anyway? "
msgstr ""

#: infcmd.c:1242
msgid "Continuing at "
msgstr ""

#: infcmd.c:1273 infcmd.c:1358
msgid "signal number"
msgstr ""

#: infcmd.c:1314
msgid "Note:\n"
msgstr ""

#: infcmd.c:1315
#, possible-c-format
msgid "  Thread %s previously stopped with signal %s, %s.\n"
msgstr ""

#: infcmd.c:1324
#, possible-c-format
msgid ""
"Continuing thread %s (the current thread) with specified signal will\n"
"still deliver the signals noted above to their respective threads.\n"
"Continue anyway? "
msgstr ""

#: infcmd.c:1334
msgid "Continuing with no signal.\n"
msgstr ""

#: infcmd.c:1336
#, possible-c-format
msgid "Continuing with signal %s.\n"
msgstr ""

#: infcmd.c:1378
msgid "Signal handling set to not pass this signal to the program."
msgstr ""

#: infcmd.c:1469
msgid "Execution is not within a known function."
msgstr ""

#: infcmd.c:1530
msgid "a location"
msgstr ""

#: infcmd.c:1622
msgid "<not displayed>"
msgstr ""

#: infcmd.c:1706
msgid "finish_command: function has no target type"
msgstr ""

#: infcmd.c:1886
msgid "The \"finish\" command does not take any arguments."
msgstr ""

#. Finishing from an inline frame is completely different.  We don't
#. try to show the "return value" - no way to locate it.
#: infcmd.c:1888 infcmd.c:1902
msgid "No selected frame."
msgstr ""

#: infcmd.c:1890
msgid "\"finish\" not meaningful in the outermost frame."
msgstr ""

#: infcmd.c:1919 infcmd.c:1944
msgid "Run till exit from "
msgstr ""

#: infcmd.c:1936
msgid "Run back to call of "
msgstr ""

#: infcmd.c:1940
#, possible-c-format
msgid ""
"warning: Function %s does not return normally.\n"
"Try to finish anyway? "
msgstr ""

#: infcmd.c:1973
msgid "The program being debugged is not being run.\n"
msgstr ""

#: infcmd.c:1987
msgid "No selected thread."
msgstr ""

#: infcmd.c:1992
msgid "Invalid selected thread."
msgstr ""

#: infcmd.c:1994 thread.c:921
msgid "Selected thread is running."
msgstr ""

#: infcmd.c:2000
#, possible-c-format
msgid "Program stopped at %s.\n"
msgstr ""

#: infcmd.c:2003
msgid "It stopped after being stepped.\n"
msgstr ""

#: infcmd.c:2012
msgid "It stopped at a breakpoint that has since been deleted.\n"
msgstr ""

#: infcmd.c:2016
#, possible-c-format
msgid "It stopped at breakpoint %d.\n"
msgstr ""

#: infcmd.c:2022
#, possible-c-format
msgid "It stopped with signal %s, %s.\n"
msgstr ""

#: infcmd.c:2029
msgid "Type \"info stack\" or \"info registers\" for more information.\n"
msgstr ""

#: infcmd.c:2074
msgid "environment variable and value"
msgstr ""

#: infcmd.c:2098
msgid "environment variable to set"
msgstr ""

#: infcmd.c:2120
#, possible-c-format
msgid "Setting environment variable \"%s\" to null value.\n"
msgstr ""

#. If there is no argument, delete all environment variables.
#. Ask for confirmation if reading from the terminal.
#: infcmd.c:2136
msgid "Delete all environment variables? "
msgstr ""

#: infcmd.c:2326 infcmd.c:2467 infcmd.c:2993
msgid "The program has no registers now."
msgstr ""

#: infcmd.c:2350
msgid "Missing register name"
msgstr ""

#. Nothing matched.
#: infcmd.c:2421
#, possible-c-format
msgid "Invalid register `%.*s'"
msgstr ""

#: infcmd.c:2483
msgid "Kill the program being debugged? "
msgstr ""

#: infcmd.c:2495
#, possible-c-format
msgid "[Inferior %d (%s) killed]\n"
msgstr ""

#: infcmd.c:2508
#, possible-c-format
msgid "In %s,\n"
msgstr ""

#: infcmd.c:2702 target.c:1989
msgid "A program is being debugged already.  Kill it? "
msgstr ""

#: infcmd.c:2705
msgid "Not killed."
msgstr ""

#: infcmd.c:2720
msgid "Cannot attach to this target in non-stop mode"
msgstr ""

#: infcmd.c:2959
msgid "-a is meaningless in all-stop mode."
msgstr ""

#: infcmd.c:3002
msgid "\"unset\" must be followed by the name of an unset subcommand.\n"
msgstr ""

#: infcmd.c:3102
#, possible-c-format
msgid "Printing of return value after `finish' is %s.\n"
msgstr ""

#: infcmd.c:3133
msgid "Set terminal for future runs of program being debugged."
msgstr ""

#: infcmd.c:3134
msgid "Show terminal for future runs of program being debugged."
msgstr ""

#: infcmd.c:3135
msgid ""
"Usage: set inferior-tty [TTY]\n"
"\n"
"If TTY is omitted, the default behavior of using the same terminal as GDB\n"
"is restored."
msgstr ""

#: infcmd.c:3149
msgid "Set argument list to give program being debugged when it is started."
msgstr ""

#: infcmd.c:3150
msgid "Show argument list to give program being debugged when it is started."
msgstr ""

#: infcmd.c:3151
msgid ""
"Follow this command with any number of args, to be passed to the program."
msgstr ""

#: infcmd.c:3162
msgid ""
"Set the current working directory to be used when the inferior is started.\n"
"Changing this setting does not have any effect on inferiors that are\n"
"already running."
msgstr ""

#: infcmd.c:3166
msgid ""
"Show the current working directory that is used when the inferior is started."
msgstr ""

#: infcmd.c:3168
msgid ""
"Use this command to change the current working directory that will be used\n"
"when the inferior is started.  This setting does not affect GDB's current\n"
"working directory."
msgstr ""

#: infcmd.c:3179
msgid ""
"The environment to give the program, or one variable's value.\n"
"With an argument VAR, prints the value of environment variable VAR to\n"
"give the program being debugged.  With no arguments, prints the entire\n"
"environment to be given to the program."
msgstr ""

#: infcmd.c:3187
msgid "Complement to certain \"set\" commands."
msgstr ""

#: infcmd.c:3190
msgid ""
"Cancel environment variable VAR for the program.\n"
"This does not affect the program until the next \"run\" command."
msgstr ""

#: infcmd.c:3196
msgid ""
"Set environment variable value to give the program.\n"
"Arguments are VAR VALUE where VAR is variable name and VALUE is value.\n"
"VALUES of environment variables are uninterpreted strings.\n"
"This does not affect the program until the next \"run\" command."
msgstr ""

#: infcmd.c:3204
msgid ""
"Add directory DIR(s) to beginning of search path for object files.\n"
"$cwd in the path means the current working directory.\n"
"This path is equivalent to the $PATH shell variable.  It is a list of\n"
"directories, separated by colons.  These directories are searched to find\n"
"fully linked executable files and separately compiled object files as needed."
msgstr ""

#: infcmd.c:3213
msgid ""
"Current search path for finding object files.\n"
"$cwd in the path means the current working directory.\n"
"This path is equivalent to the $PATH shell variable.  It is a list of\n"
"directories, separated by colons.  These directories are searched to find\n"
"fully linked executable files and separately compiled object files as needed."
msgstr ""

#: infcmd.c:3224
msgid "Kill execution of program being debugged."
msgstr ""

#: infcmd.c:3227
msgid ""
"Attach to a process or file outside of GDB.\n"
"This command attaches to another target, of the same type as your last\n"
"\"target\" command (\"info files\" will show your target stack).\n"
"The command may take as argument a process id or a device file.\n"
"For a process id, you must have permission to send the process a signal,\n"
"and it must have the same effective uid as the debugger.\n"
"When using \"attach\" with a process id, the debugger finds the\n"
"program running in the process, looking first in the current working\n"
"directory, or (if not found there) using the source file search path\n"
"(see the \"directory\" command).  You can also use the \"file\" command\n"
"to specify the program, and to load its symbol table."
msgstr ""

#: infcmd.c:3240
msgid ""
"Detach a process or file previously attached.\n"
"If a process, it is no longer traced, and it continues its execution.  If\n"
"you were debugging a file, the file is closed and gdb no longer accesses it."
msgstr ""

#: infcmd.c:3246
msgid ""
"Disconnect from a target.\n"
"The target will wait for another debugger to connect.  Not available for\n"
"all targets."
msgstr ""

#: infcmd.c:3251
msgid ""
"Continue program with the specified signal.\n"
"Usage: signal SIGNAL\n"
"The SIGNAL argument is processed the same as the handle command.\n"
"\n"
"An argument of \"0\" means continue the program without sending it a "
"signal.\n"
"This is useful in cases where the program stopped because of a signal,\n"
"and you want to resume the program while discarding the signal.\n"
"\n"
"In a multi-threaded program the signal is delivered to, or discarded from,\n"
"the current thread only."
msgstr ""

#: infcmd.c:3264
msgid ""
"Queue a signal to be delivered to the current thread when it is resumed.\n"
"Usage: queue-signal SIGNAL\n"
"The SIGNAL argument is processed the same as the handle command.\n"
"It is an error if the handling state of SIGNAL is \"nopass\".\n"
"\n"
"An argument of \"0\" means remove any currently queued signal from\n"
"the current thread.  This is useful in cases where the program stopped\n"
"because of a signal, and you want to resume it while discarding the signal.\n"
"\n"
"In a multi-threaded program the signal is queued with, or discarded from,\n"
"the current thread only."
msgstr ""

#: infcmd.c:3278
msgid ""
"Step one instruction exactly.\n"
"Usage: stepi [N]\n"
"Argument N means step N times (or till program stops for another reason)."
msgstr ""

#: infcmd.c:3285
msgid ""
"Step one instruction, but proceed through subroutine calls.\n"
"Usage: nexti [N]\n"
"Argument N means step N times (or till program stops for another reason)."
msgstr ""

#: infcmd.c:3292
msgid ""
"Execute until selected stack frame returns.\n"
"Usage: finish\n"
"Upon return, the value returned is printed and put in the value history."
msgstr ""

#: infcmd.c:3298
msgid ""
"Step program, proceeding through subroutine calls.\n"
"Usage: next [N]\n"
"Unlike \"step\", if the current source line calls a subroutine,\n"
"this command does not enter the subroutine, but instead steps over\n"
"the call, in effect treating it as a single source line."
msgstr ""

#: infcmd.c:3306
msgid ""
"Step program until it reaches a different source line.\n"
"Usage: step [N]\n"
"Argument N means step N times (or till program stops for another reason)."
msgstr ""

#: infcmd.c:3313
msgid ""
"Execute until past the current line or past a LOCATION.\n"
"Execute until the program reaches a source line greater than the current\n"
"or a specified location (same args as break command) within the current "
"frame."
msgstr ""

#: infcmd.c:3321
msgid ""
"Continue the program up to the given location (same form as args for break "
"command).\n"
"Execution will also stop upon exit from the current stack frame."
msgstr ""

#: infcmd.c:3327
msgid ""
"Continue program being debugged at specified line or address.\n"
"Usage: jump LOCATION\n"
"Give as argument either LINENUM or *ADDR, where ADDR is an expression\n"
"for an address to start at."
msgstr ""

#: infcmd.c:3335
msgid ""
"Continue program being debugged, after signal or breakpoint.\n"
"Usage: continue [N]\n"
"If proceeding from breakpoint, a number N may be used as an argument,\n"
"which means to set the ignore count of that breakpoint to N - 1 (so that\n"
"the breakpoint won't break until the Nth time it is reached).\n"
"\n"
"If non-stop mode is enabled, continue only the current thread,\n"
"otherwise all the threads in the program are continued.  To \n"
"continue all stopped threads in non-stop mode, use the -a option.\n"
"Specifying -a and an ignore count simultaneously is an error."
msgstr ""

#: infcmd.c:3349
msgid "Start debugged program.\n"
msgstr ""

#: infcmd.c:3355
msgid ""
"Start the debugged program stopping at the beginning of the main procedure.\n"
msgstr ""

#: infcmd.c:3360
msgid "Start the debugged program stopping at the first instruction.\n"
msgstr ""

#: infcmd.c:3366
msgid ""
"Interrupt the execution of the debugged program.\n"
"If non-stop mode is enabled, interrupt only the current thread,\n"
"otherwise all the threads in the program are stopped.  To \n"
"interrupt all running threads in non-stop mode, use the -a option."
msgstr ""

#: infcmd.c:3371
msgid ""
"List of integer registers and their contents, for selected stack frame.\n"
"One or more register names as argument means describe the given registers.\n"
"One or more register group names as argument means describe the registers\n"
"in the named register groups."
msgstr ""

#: infcmd.c:3379
msgid ""
"List of all registers and their contents, for selected stack frame.\n"
"One or more register names as argument means describe the given registers.\n"
"One or more register group names as argument means describe the registers\n"
"in the named register groups."
msgstr ""

#: infcmd.c:3387
msgid "Execution status of the program."
msgstr ""

#: infcmd.c:3390
msgid "Print the status of the floating point unit."
msgstr ""

#: infcmd.c:3393
msgid "Print the status of the vector unit."
msgstr ""

#: infcmd.c:3396
msgid ""
"Show additional information about a process.\n"
"Specify any process id, or use the program being debugged by default."
msgstr ""

#. allow-unknown
#: infcmd.c:3402
msgid "List memory regions mapped by the specified process."
msgstr ""

#: infcmd.c:3406
msgid "List process info from /proc/PID/stat."
msgstr ""

#: infcmd.c:3410
msgid "List process info from /proc/PID/status."
msgstr ""

#: infcmd.c:3414
msgid "List current working directory of the specified process."
msgstr ""

#: infcmd.c:3418
msgid "List command line arguments of the specified process."
msgstr ""

#: infcmd.c:3422
msgid "List absolute filename for executable of the specified process."
msgstr ""

#: infcmd.c:3426
msgid "List files opened by the specified process."
msgstr ""

#: infcmd.c:3430
msgid "List all available info about the specified process."
msgstr ""

#: infcmd.c:3435
msgid "Set whether `finish' prints the return value."
msgstr ""

#: infcmd.c:3436
msgid "Show whether `finish' prints the return value."
msgstr ""

#: inferior.c:127
#, possible-c-format
msgid "[New inferior %d (%s)]\n"
msgstr ""

#: inferior.c:131
#, possible-c-format
msgid "[New inferior %d]\n"
msgstr ""

#: inferior.c:240 remote.c:5681
#, possible-c-format
msgid "[Inferior %d (%s) detached]\n"
msgstr ""

#: inferior.c:422
msgid "<noexec>"
msgstr ""

#: inferior.c:424
#, possible-c-format
msgid "[Switching to inferior %d [%s] (%s)]\n"
msgstr ""

#: inferior.c:488
msgid ""
"\n"
"\tis vfork child of inferior "
msgstr ""

#: inferior.c:493
msgid ""
"\n"
"\tis vfork parent of inferior "
msgstr ""

#: inferior.c:505
msgid "Requires argument (inferior id(s) to detach)"
msgstr ""

#: inferior.c:515 inferior.c:552 inferior.c:587 inferior.c:640 inferior.c:790
#, possible-c-format
msgid "Inferior ID %d not known."
msgstr ""

#: inferior.c:521 inferior.c:558
#, possible-c-format
msgid "Inferior ID %d is not running."
msgstr ""

#: inferior.c:528 inferior.c:565
#, possible-c-format
msgid "Inferior ID %d has no threads."
msgstr ""

#: inferior.c:542
msgid "Requires argument (inferior id(s) to kill)"
msgstr ""

#: inferior.c:595 mi/mi-main.c:412
msgid "Inferior has no threads."
msgstr ""

#: inferior.c:630
msgid "Requires an argument (inferior id(s) to remove)"
msgstr ""

#: inferior.c:646
#, possible-c-format
msgid "Can not remove current inferior %d."
msgstr ""

#: inferior.c:652
#, possible-c-format
msgid "Can not remove active inferior %d."
msgstr ""

#: inferior.c:712 inferior.c:771
msgid "No argument to -copies"
msgstr ""

#: inferior.c:719
msgid "No argument to -exec"
msgstr ""

#: inferior.c:724 inferior.c:794 mi/mi-main.c:1611
msgid "Invalid argument"
msgstr ""

#: inferior.c:734
#, possible-c-format
msgid "Added inferior %d\n"
msgstr ""

#: inferior.c:775
msgid "Invalid copies number"
msgstr ""

#: inferior.c:827
#, possible-c-format
msgid "Added inferior %d.\n"
msgstr ""

#: inferior.c:840
#, possible-c-format
msgid "Printing of inferior events is %s.\n"
msgstr ""

#: inferior.c:884
msgid ""
"Print a list of inferiors being managed.\n"
"Usage: info inferiors [ID]...\n"
"If IDs are specified, the list is limited to just those inferiors.\n"
"By default all inferiors are displayed."
msgstr ""

#: inferior.c:889
msgid ""
"Add a new inferior.\n"
"Usage: add-inferior [-copies N] [-exec FILENAME]\n"
"N is the optional number of inferiors to add, default is 1.\n"
"FILENAME is the file name of the executable to use\n"
"as main program."
msgstr ""

#: inferior.c:897
msgid ""
"Remove inferior ID (or list of IDs).\n"
"Usage: remove-inferiors ID..."
msgstr ""

#: inferior.c:901
msgid ""
"Clone inferior ID.\n"
"Usage: clone-inferior [-copies N] [ID]\n"
"Add N copies of inferior ID.  The new inferior has the same\n"
"executable loaded as the copied inferior.  If -copies is not specified,\n"
"adds 1 copy.  If ID is not specified, it is the current inferior\n"
"that is cloned."
msgstr ""

#: inferior.c:909
msgid ""
"Detach from inferior ID (or list of IDS).\n"
"Usage; detach inferiors ID..."
msgstr ""

#: inferior.c:914
msgid ""
"Kill inferior ID (or list of IDs).\n"
"Usage: kill inferiors ID..."
msgstr ""

#: inferior.c:919
msgid ""
"Use this command to switch between inferiors.\n"
"Usage: inferior ID\n"
"The new inferior ID must be currently known."
msgstr ""

#: inferior.c:926
msgid "Set printing of inferior events (such as inferior start and exit)."
msgstr ""

#: inferior.c:927
msgid "Show printing of inferior events (such as inferior start and exit)."
msgstr ""

#: inferior.h:81
#, possible-c-format
msgid "Failed to restore inferior state: %s"
msgstr ""

#: inflow.c:690
msgid "This GDB does not control a terminal.\n"
msgstr ""

#: inflow.c:700
msgid "Inferior's terminal status (currently saved by GDB):\n"
msgstr ""

#. Mention GDB in warning because it will appear in the inferior's
#. terminal instead of GDB's.
#: inflow.c:846
#, possible-c-format
msgid "GDB: Failed to set controlling terminal: %s"
msgstr ""

#: inflow.c:935
#, possible-c-format
msgid "Failed to create new terminal session: setsid: %s"
msgstr ""

#: inflow.c:960
msgid "Print inferior's saved terminal status."
msgstr ""

#: infrun.c:138
#, possible-c-format
msgid "Mode of the step operation is %s.\n"
msgstr ""

#: infrun.c:159
#, possible-c-format
msgid "Displace stepping debugging is %s.\n"
msgstr ""

#: infrun.c:167
#, possible-c-format
msgid "Inferior debugging is %s.\n"
msgstr ""

#: infrun.c:181
#, possible-c-format
msgid "Disabling randomization of debuggee's virtual address space is %s.\n"
msgstr ""

#: infrun.c:185
msgid ""
"Disabling randomization of debuggee's virtual address space is unsupported "
"on\n"
"this platform.\n"
msgstr ""

#: infrun.c:195
msgid ""
"Disabling randomization of debuggee's virtual address space is unsupported "
"on\n"
"this platform."
msgstr ""

#: infrun.c:212 infrun.c:241 mi/mi-main.c:116 target.c:3851 target.c:3904
#: target.c:3960
msgid "Cannot change this setting while the inferior is running."
msgstr ""

#: infrun.c:223
#, possible-c-format
msgid "Controlling the inferior in non-stop mode is %s.\n"
msgstr ""

#: infrun.c:266 infrun.c:294
#, possible-c-format
msgid "Observer mode is now %s.\n"
msgstr ""

#: infrun.c:274
#, possible-c-format
msgid "Observer mode is %s.\n"
msgstr ""

#: infrun.c:367
#, possible-c-format
msgid "Stopping for shared library events is %s.\n"
msgstr ""

#: infrun.c:398
#, possible-c-format
msgid "Debugger response to a program call of fork or vfork is \"%s\".\n"
msgstr ""

#. The parent stays blocked inside the vfork syscall until the
#. child execs or exits.  If we don't let the child run, then
#. the parent stays blocked.  If we're telling the parent to run
#. in the foreground, the user will not be able to ctrl-c to get
#. back the terminal, effectively hanging the debug session.
#: infrun.c:431
msgid ""
"Can not resume the parent process over vfork in the foreground while\n"
"holding the child stopped.  Try \"set detach-on-fork\" or \"set schedule-"
"multiple\".\n"
msgstr ""

#: infrun.c:463
#, possible-c-format
msgid "[Detaching after %s from child %s]\n"
msgstr ""

#: infrun.c:551
#, possible-c-format
msgid "[Attaching after %s %s to child %s]\n"
msgstr ""

#: infrun.c:599
#, possible-c-format
msgid "[Detaching after fork from parent %s]\n"
msgstr ""

#. If we get here, it was because we're trying to
#. resume from a fork catchpoint, but, the user
#. has switched threads away from the thread that
#. forked.  In that case, the resume command
#. issued is most likely not applicable to the
#. child, so just warn, and refuse to resume.
#: infrun.c:789
msgid "Not resuming: switched threads before following fork child."
msgstr ""

#: infrun.c:969
#, possible-c-format
msgid "[Detaching vfork parent %s after child exec]\n"
msgstr ""

#: infrun.c:975
#, possible-c-format
msgid "[Detaching vfork parent %s after child exit]\n"
msgstr ""

#: infrun.c:1066
#, possible-c-format
msgid "Follow exec mode is \"%s\".\n"
msgstr ""

#: infrun.c:1148
#, possible-c-format
msgid "%s is executing new program: %s\n"
msgstr ""

#: infrun.c:1165
#, possible-c-format
msgid ""
"Could not load symbols for executable %s.\n"
"Do you need \"set sysroot\"?"
msgstr ""

#: infrun.c:1553
#, possible-c-format
msgid ""
"Debugger's willingness to use displaced stepping to step over breakpoints is "
"%s (currently %s).\n"
msgstr ""

#: infrun.c:1558
#, possible-c-format
msgid ""
"Debugger's willingness to use displaced stepping to step over breakpoints is "
"%s.\n"
msgstr ""

#: infrun.c:1713
#, possible-c-format
msgid ""
"Error accessing memory address %s (%s) for displaced-stepping scratch space."
msgstr ""

#: infrun.c:1790
#, possible-c-format
msgid "disabling displaced stepping: %s"
msgstr ""

#: infrun.c:2004 infrun.c:3024 infrun.c:3034 utils.c:439
msgid "Command aborted."
msgstr ""

#: infrun.c:2065
#, possible-c-format
msgid "Mode for locking scheduler during execution is \"%s\".\n"
msgstr ""

#: infrun.c:2076
#, possible-c-format
msgid "Target '%s' cannot support this command."
msgstr ""

#: infrun.c:2259
#, possible-c-format
msgid "Couldn't deliver signal %s to %s."
msgstr ""

#: infrun.c:3499
msgid "Program exited while detaching"
msgstr ""

#: infrun.c:3802
msgid "completed.\n"
msgstr ""

#: infrun.c:4812
#, possible-c-format
msgid "unhandled stop_soon: %d"
msgstr ""

#: infrun.c:4879
msgid "Cannot fill $_exitsignal with the correct signal number.\n"
msgstr ""

#: infrun.c:7786
msgid "Unknown value."
msgstr ""

#: infrun.c:7841
msgid ""
"Cannot remove breakpoints because program is no longer writable.\n"
"Further execution is probably impossible.\n"
msgstr ""

#: infrun.c:7994 linux-fork.c:354 linux-fork.c:387
#, possible-c-format
msgid "[Switching to %s]\n"
msgstr ""

#: infrun.c:8007
msgid "No unwaited-for children left.\n"
msgstr ""

#: infrun.c:8191
msgid "Signal        Stop\tPrint\tPass to program\tDescription\n"
msgstr ""

#: infrun.c:8224
msgid "signal to handle"
msgstr ""

#. Not a number and not a recognized flag word => complain.
#: infrun.c:8323
#, possible-c-format
msgid "Unrecognized or ambiguous flag word: \"%s\"."
msgstr ""

#: infrun.c:8338
#, possible-c-format
msgid ""
"%s is used by the debugger.\n"
"Are you sure you want to change it? "
msgstr ""

#: infrun.c:8345
msgid "Not confirmed, unchanged.\n"
msgstr ""

#: infrun.c:8410
msgid ""
"Only signals 1-15 are valid as numeric signals.\n"
"Use \"info signals\" for a list of symbolic signals."
msgstr ""

#: infrun.c:8453
msgid ""
"\n"
"Use the \"handle\" command to change these tables.\n"
msgstr ""

#: infrun.c:8487
msgid "Unable to read siginfo"
msgstr ""

#: infrun.c:8510
msgid "Unable to write siginfo"
msgstr ""

#: infrun.c:8839
msgid "Target does not support this operation."
msgstr ""

#: infrun.c:8849
msgid "Forward.\n"
msgstr ""

#: infrun.c:8852
msgid "Reverse.\n"
msgstr ""

#: infrun.c:8856
#, possible-c-format
msgid "bogus execution_direction value: %d"
msgstr ""

#: infrun.c:8865
#, possible-c-format
msgid "Resuming the execution of threads of all processes is %s.\n"
msgstr ""

#: infrun.c:8896
msgid ""
"What debugger does when program gets various signals.\n"
"Specify a signal as argument to print info on that signal only."
msgstr ""

#: infrun.c:8901
msgid ""
"Specify how to handle signals.\n"
"Usage: handle SIGNAL [ACTIONS]\n"
"Args are signals and actions to apply to those signals.\n"
"If no actions are specified, the current settings for the specified signals\n"
"will be displayed instead.\n"
"\n"
"Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n"
"from 1-15 are allowed for compatibility with old versions of GDB.\n"
"Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n"
"The special arg \"all\" is recognized to mean all signals except those\n"
"used by the debugger, typically SIGTRAP and SIGINT.\n"
"\n"
"Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n"
"\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n"
"Stop means reenter debugger if this signal happens (implies print).\n"
"Print means print a message if this signal happens.\n"
"Pass means let program see this signal; otherwise program doesn't know.\n"
"Ignore is a synonym for nopass and noignore is a synonym for pass.\n"
"Pass and Stop may be combined.\n"
"\n"
"Multiple signals may be specified.  Signal numbers and signal names\n"
"may be interspersed with actions, with the actions being performed for\n"
"all signals cumulatively specified."
msgstr ""

#: infrun.c:8929
msgid ""
"There is no `stop' command, but you can set a hook on `stop'.\n"
"This allows you to set a list of commands to be run each time execution\n"
"of the program stops."
msgstr ""

#: infrun.c:8934
msgid "Set inferior debugging."
msgstr ""

#: infrun.c:8935
msgid "Show inferior debugging."
msgstr ""

#: infrun.c:8936
msgid "When non-zero, inferior specific debugging is enabled."
msgstr ""

#: infrun.c:8943
msgid "Set displaced stepping debugging."
msgstr ""

#: infrun.c:8944
msgid "Show displaced stepping debugging."
msgstr ""

#: infrun.c:8945
msgid "When non-zero, displaced stepping specific debugging is enabled."
msgstr ""

#: infrun.c:8952
msgid "Set whether gdb controls the inferior in non-stop mode."
msgstr ""

#: infrun.c:8953
msgid "Show whether gdb controls the inferior in non-stop mode."
msgstr ""

#: infrun.c:8954
msgid ""
"When debugging a multi-threaded program and this setting is\n"
"off (the default, also called all-stop mode), when one thread stops\n"
"(for a breakpoint, watchpoint, exception, or similar events), GDB stops\n"
"all other threads in the program while you interact with the thread of\n"
"interest.  When you continue or step a thread, you can allow the other\n"
"threads to run, or have them remain stopped, but while you inspect any\n"
"thread's state, all threads stop.\n"
"\n"
"In non-stop mode, when one thread stops, other threads can continue\n"
"to run freely.  You'll be able to step each thread independently,\n"
"leave it stopped or free to run as needed."
msgstr ""

#: infrun.c:9032
msgid "Set stopping for shared library events."
msgstr ""

#: infrun.c:9033
msgid "Show stopping for shared library events."
msgstr ""

#: infrun.c:9034
msgid ""
"If nonzero, gdb will give control to the user when the dynamic linker\n"
"notifies gdb of shared library events.  The most common event of interest\n"
"to the user would be loading/unloading of a new library."
msgstr ""

#: infrun.c:9044
msgid "Set debugger response to a program call of fork or vfork."
msgstr ""

#: infrun.c:9045
msgid "Show debugger response to a program call of fork or vfork."
msgstr ""

#: infrun.c:9046
msgid ""
"A fork or vfork creates a new process.  follow-fork-mode can be:\n"
"  parent  - the original process is debugged after a fork\n"
"  child   - the new process is debugged after a fork\n"
"The unfollowed process will continue to run.\n"
"By default, the debugger will follow the parent process."
msgstr ""

#: infrun.c:9058
msgid "Set debugger response to a program call of exec."
msgstr ""

#: infrun.c:9059
msgid "Show debugger response to a program call of exec."
msgstr ""

#: infrun.c:9060
msgid ""
"An exec call replaces the program image of a process.\n"
"\n"
"follow-exec-mode can be:\n"
"\n"
"  new - the debugger creates a new inferior and rebinds the process\n"
"to this new inferior.  The program the process was running before\n"
"the exec call can be restarted afterwards by restarting the original\n"
"inferior.\n"
"\n"
"  same - the debugger keeps the process bound to the same inferior.\n"
"The new executable image replaces the previous executable loaded in\n"
"the inferior.  Restarting the inferior after the exec call restarts\n"
"the executable the process was running after the exec call.\n"
"\n"
"By default, the debugger will use the same inferior."
msgstr ""

#: infrun.c:9081
msgid "Set mode for locking scheduler during execution."
msgstr ""

#: infrun.c:9082
msgid "Show mode for locking scheduler during execution."
msgstr ""

#: infrun.c:9083
msgid ""
"off    == no locking (threads may preempt at any time)\n"
"on     == full locking (no thread except the current thread may run)\n"
"          This applies to both normal execution and replay mode.\n"
"step   == scheduler locked during stepping commands (step, next, stepi, "
"nexti).\n"
"          In this mode, other threads may run during other commands.\n"
"          This applies to both normal execution and replay mode.\n"
"replay == scheduler locked in replay mode and unlocked during normal "
"execution."
msgstr ""

#: infrun.c:9095
msgid "Set mode for resuming threads of all processes."
msgstr ""

#: infrun.c:9096
msgid "Show mode for resuming threads of all processes."
msgstr ""

#: infrun.c:9097
msgid ""
"When on, execution commands (such as 'continue' or 'next') resume all\n"
"threads of all processes.  When off (which is the default), execution\n"
"commands only resume the threads of the current process.  The set of\n"
"threads that are resumed is further refined by the scheduler-locking\n"
"mode (see help set scheduler-locking)."
msgstr ""

#: infrun.c:9107
msgid "Set mode of the step operation."
msgstr ""

#: infrun.c:9108
msgid "Show mode of the step operation."
msgstr ""

#: infrun.c:9109
msgid ""
"When set, doing a step over a function without debug line information\n"
"will stop at the first instruction of that function. Otherwise, the\n"
"function is skipped and the step command stops at a different source line."
msgstr ""

#: infrun.c:9118
msgid "Set debugger's willingness to use displaced stepping."
msgstr ""

#: infrun.c:9119
msgid "Show debugger's willingness to use displaced stepping."
msgstr ""

#: infrun.c:9120
msgid ""
"If on, gdb will use displaced stepping to step over breakpoints if it is\n"
"supported by the target architecture.  If off, gdb will not use displaced\n"
"stepping to step over breakpoints, even if such is supported by the target\n"
"architecture.  If auto (which is the default), gdb will use displaced "
"stepping\n"
"if the target architecture supports it and non-stop mode is active, but will "
"not\n"
"use it in all-stop mode (see help set non-stop)."
msgstr ""

#: infrun.c:9132
msgid ""
"Set direction of execution.\n"
"Options are 'forward' or 'reverse'."
msgstr ""

#: infrun.c:9134
msgid "Show direction of execution (forward/reverse)."
msgstr ""

#: infrun.c:9135
msgid "Tells gdb whether to execute forward or backward."
msgstr ""

#. Set/show detach-on-fork: user-settable mode.
#: infrun.c:9141
msgid "Set whether gdb will detach the child of a fork."
msgstr ""

#: infrun.c:9142
msgid "Show whether gdb will detach the child of a fork."
msgstr ""

#: infrun.c:9143
msgid "Tells gdb whether to detach the child of a fork."
msgstr ""

#: infrun.c:9150
msgid "Set disabling of debuggee's virtual address space randomization."
msgstr ""

#: infrun.c:9151
msgid "Show disabling of debuggee's virtual address space randomization."
msgstr ""

#: infrun.c:9152
msgid ""
"When this mode is on (which is the default), randomization of the virtual\n"
"address space is disabled.  Standalone programs run with the randomization\n"
"enabled by default on some platforms."
msgstr ""

#: infrun.c:9176
msgid "Set whether gdb controls the inferior in observer mode."
msgstr ""

#: infrun.c:9177
msgid "Show whether gdb controls the inferior in observer mode."
msgstr ""

#: infrun.c:9178
msgid ""
"In observer mode, GDB can get data from the inferior, but not\n"
"affect its execution.  Registers and memory may not be changed,\n"
"breakpoints may not be set, and the program cannot be interrupted\n"
"or signalled."
msgstr ""

#: interps.c:121
#, possible-c-format
msgid "interpreter factory already registered: \"%s\"\n"
msgstr ""

#: interps.c:252
#, possible-c-format
msgid "Interpreter `%s' unrecognized"
msgstr ""

#: interps.c:374
msgid "interpreter-exec command"
msgstr ""

#: interps.c:380
msgid "Usage: interpreter-exec INTERPRETER COMMAND..."
msgstr ""

#: interps.c:386
#, possible-c-format
msgid "Could not find interpreter \"%s\"."
msgstr ""

#: interps.c:397
#, possible-c-format
msgid "error in command: \"%s\"."
msgstr ""

#: interps.c:448
msgid ""
"Execute a command in an interpreter.\n"
"Usage: interpreter-exec INTERPRETER COMMAND...\n"
"The first argument is the name of the interpreter to use.\n"
"The following arguments are the commands to execute.\n"
"A command can have arguments, separated by spaces.\n"
"These spaces must be escaped using \\ or the command\n"
"and its arguments must be enclosed in double quotes."
msgstr ""

#: iq2000-tdep.c:457
#, possible-c-format
msgid "breakpoint_from_pc: invalid breakpoint address 0x%lx"
msgstr ""

#: jit.c:70
#, possible-c-format
msgid "JIT debugging is %s.\n"
msgstr ""

#: jit.c:187
#, possible-c-format
msgid "Opening shared object %s.\n"
msgstr ""

#: jit.c:193
#, possible-c-format
msgid "Could not locate initialization function: %s."
msgstr ""

#: jit.c:197
msgid "Reader not GPL compatible."
msgstr ""

#: jit.c:201
msgid "Reader version does not match GDB version."
msgstr ""

#: jit.c:212
msgid "No reader name provided."
msgstr ""

#: jit.c:216
msgid "JIT reader already loaded.  Run jit-reader-unload first."
msgstr ""

#: jit.c:233
msgid "No JIT reader loaded."
msgstr ""

#: jit.c:369
msgid "Unable to read JIT descriptor from remote memory\n"
msgstr ""

#: jit.c:414
msgid "Unable to read JIT code entry from remote memory!"
msgstr ""

#: jit.c:888
msgid "Error opening JITed symbol file, ignoring it.\n"
msgstr ""

#: jit.c:896
msgid "JITed symbol file is not an object file, ignoring it.\n"
msgstr ""

#: jit.c:904
#, possible-c-format
msgid ""
"JITed object file architecture %s is not compatible with target architecture "
"%s."
msgstr ""

#: jit.c:1097
#, possible-c-format
msgid "Could not recognize DWARF regnum %d"
msgstr ""

#: jit.c:1190
msgid "Successfully unwound frame using JIT reader.\n"
msgstr ""

#: jit.c:1195
msgid "Could not unwind frame using JIT reader.\n"
msgstr ""

#: jit.c:1323
#, possible-c-format
msgid "Unsupported JIT protocol version %ld in descriptor (expected 1)\n"
msgstr ""

#: jit.c:1415
#, possible-c-format
msgid "Unable to find JITed code entry at address: %s\n"
msgstr ""

#: jit.c:1423
msgid "Unknown action_flag value in JIT descriptor!"
msgstr ""

#: jit.c:1472
msgid "Set JIT debugging."
msgstr ""

#: jit.c:1473
msgid "Show JIT debugging."
msgstr ""

#: jit.c:1474
msgid "When non-zero, JIT debugging is enabled."
msgstr ""

#: jit.c:1490
msgid ""
"Load FILE as debug info reader and unwinder for JIT compiled code.\n"
"Usage: jit-reader-load FILE\n"
"Try to load file FILE as a debug info reader (and unwinder) for\n"
"JIT compiled code.  The file is loaded from "
msgstr ""

#: jit.c:1499
msgid ""
"Unload the currently loaded JIT debug info reader.\n"
"Usage: jit-reader-unload\n"
"\n"
"Do \"help jit-reader-load\" for info on loading debug info readers."
msgstr ""

#: language.c:117
msgid "Warning: the current language does not match this frame."
msgstr ""

#: language.c:132
#, possible-c-format
msgid "The current source language is \"auto; currently %s\".\n"
msgstr ""

#: language.c:137
#, possible-c-format
msgid "The current source language is \"%s\".\n"
msgstr ""

#: language.c:238
#, possible-c-format
msgid "Range checking is \"auto; currently %s\".\n"
msgstr ""

#: language.c:242
#, possible-c-format
msgid "Range checking is \"%s\".\n"
msgstr ""

#: language.c:246 language.c:282
msgid "the current range check setting does not match the language.\n"
msgstr ""

#: language.c:279
#, possible-c-format
msgid "Unrecognized range check setting: \"%s\""
msgstr ""

#: language.c:310
#, possible-c-format
msgid "Case sensitivity in name search is \"auto; currently %s\".\n"
msgstr ""

#: language.c:316
#, possible-c-format
msgid "Case sensitivity in name search is \"%s\".\n"
msgstr ""

#: language.c:320 language.c:353
msgid "the current case sensitivity setting does not match the language.\n"
msgstr ""

#: language.c:396
#, possible-c-format
msgid "Current language:  %s\n"
msgstr ""

#: language.c:401
#, possible-c-format
msgid "Range checking:    %s\n"
msgstr ""

#: language.c:403
#, possible-c-format
msgid "Case sensitivity:  %s\n"
msgstr ""

#: language.c:560
#, c-format
msgid ""
"Set the current source language.\n"
"The currently understood settings are:\n"
"\n"
"local or auto    Automatic setting based on source file"
msgstr ""

#: language.c:586
msgid "Show the current source language."
msgstr ""

#: language.c:762
msgid "internal error - unimplemented function unk_lang_emit_char called."
msgstr ""

#: language.c:769
msgid "internal error - unimplemented function unk_lang_printchar called."
msgstr ""

#: language.c:779
msgid "internal error - unimplemented function unk_lang_printstr called."
msgstr ""

#: language.c:788
msgid "internal error - unimplemented function unk_lang_print_type called."
msgstr ""

#: language.c:799
msgid "internal error - unimplemented function unk_lang_val_print called."
msgstr ""

#: language.c:807
msgid "internal error - unimplemented function unk_lang_value_print called."
msgstr ""

#: language.c:1152
msgid "Set the status of the type/range checker."
msgstr ""

#: language.c:1158
msgid "Show the status of the type/range checker."
msgstr ""

#: language.c:1165
msgid "Set range checking (on/warn/off/auto)."
msgstr ""

#: language.c:1166
msgid "Show range checking (on/warn/off/auto)."
msgstr ""

#: language.c:1172
msgid "Set case sensitivity in name search (on/off/auto)."
msgstr ""

#: language.c:1173
msgid "Show case sensitivity in name search (on/off/auto)."
msgstr ""

#: language.c:1174
msgid "For Fortran the default is off; for other languages the default is on."
msgstr ""

#: linespec.c:697
msgid "unmatched quote"
msgstr ""

#: linespec.c:1550
msgid ""
"[0] cancel\n"
"[1] all\n"
msgstr ""

#: linespec.c:1570
msgid "canceled"
msgstr ""

#: linespec.c:1585
#, possible-c-format
msgid "No choice number %d.\n"
msgstr ""

#: linespec.c:1597
#, possible-c-format
msgid "duplicate request for %d ignored.\n"
msgstr ""

#: linespec.c:1633
#, possible-c-format
msgid ""
"Undefined convenience variable or function \"%s\" not defined in \"%s\"."
msgstr ""

#: linespec.c:1637
#, possible-c-format
msgid "Undefined convenience variable or function \"%s\" not defined."
msgstr ""

#: linespec.c:1644
#, possible-c-format
msgid "Function \"%s\" not defined in \"%s\"."
msgstr ""

#: linespec.c:1648
#, possible-c-format
msgid "Function \"%s\" not defined."
msgstr ""

#: linespec.c:1671
#, possible-c-format
msgid "malformed linespec error: unexpected %s, \"%s\""
msgstr ""

#: linespec.c:1676
#, possible-c-format
msgid "malformed linespec error: unexpected %s"
msgstr ""

#: linespec.c:1687
#, possible-c-format
msgid "No label \"%s\" defined in function \"%s\"."
msgstr ""

#: linespec.c:1691
#, possible-c-format
msgid "No label \"%s\" defined in current function."
msgstr ""

#: linespec.c:1700
#, possible-c-format
msgid "No source file named %s."
msgstr ""

#: linespec.c:1734
#, possible-c-format
msgid "malformed line offset: \"%s\""
msgstr ""

#: linespec.c:2207
#, possible-c-format
msgid "No line %d in the current file."
msgstr ""

#: linespec.c:3291 linespec.c:3314
msgid "Empty line specification."
msgstr ""

#: linespec.c:3303 linespec.c:3326
#, possible-c-format
msgid "Junk at end of line specification: %s"
msgstr ""

#. The error message doesn't really matter, because this case
#. should only hit during breakpoint reset.
#: linespec.c:3363
msgid "cannot evaluate expressions while program space is in startup"
msgstr ""

#. Throw an NOT_FOUND_ERROR.  This will be caught by the caller
#. and other attempts to locate the symbol will be made.
#: linespec.c:3718
msgid "see caller, this text doesn't matter"
msgstr ""

#: linespec.c:4172
msgid "History values used in line specs must have integer values."
msgstr ""

#: linespec.c:4195
msgid "Convenience variables used in line specs must have integer values."
msgstr ""

#: linux-fork.c:374 linux-fork.c:550
#, possible-c-format
msgid "Unable to detach %s"
msgstr ""

#: linux-fork.c:438
#, possible-c-format
msgid "Couldn't restore checkpoint state in %s: %s"
msgstr ""

#: linux-fork.c:497
msgid "Requires argument (checkpoint id to delete)"
msgstr ""

#: linux-fork.c:501 linux-fork.c:543
#, possible-c-format
msgid "No such checkpoint id, %s"
msgstr ""

#: linux-fork.c:504
msgid "Please switch to another checkpoint before deleting the current one"
msgstr ""

#: linux-fork.c:508
#, possible-c-format
msgid "Unable to kill pid %s"
msgstr ""

#: linux-fork.c:515
#, possible-c-format
msgid "Killed %s\n"
msgstr ""

#: linux-fork.c:528
#, possible-c-format
msgid "Unable to wait pid %s"
msgstr ""

#: linux-fork.c:539
msgid "Requires argument (checkpoint id to detach)"
msgstr ""

#: linux-fork.c:546
msgid "Please switch to another checkpoint before detaching the current one"
msgstr ""

#: linux-fork.c:553
#, possible-c-format
msgid "Detached %s\n"
msgstr ""

#: linux-fork.c:584
msgid " (main process)"
msgstr ""

#: linux-fork.c:585
msgid " at "
msgstr ""

#: linux-fork.c:590
#, possible-c-format
msgid ", file %s"
msgstr ""

#: linux-fork.c:593
#, possible-c-format
msgid ", line %d"
msgstr ""

#: linux-fork.c:608
#, possible-c-format
msgid "No checkpoint number %d.\n"
msgstr ""

#: linux-fork.c:610
msgid "No checkpoints.\n"
msgstr ""

#: linux-fork.c:656
msgid "checkpoint: can't checkpoint multiple threads."
msgstr ""

#: linux-fork.c:666
msgid "checkpoint: can't find fork function in inferior."
msgstr ""

#. Probably can't happen.
#: linux-fork.c:680
msgid "checkpoint: call_function_by_hand returned null."
msgstr ""

#: linux-fork.c:691
#, possible-c-format
msgid "checkpoint %d: fork returned pid %ld.\n"
msgstr ""

#: linux-fork.c:698
#, possible-c-format
msgid "   gdb says parent = %ld.\n"
msgstr ""

#: linux-fork.c:704
msgid "Failed to find new fork"
msgstr ""

#: linux-fork.c:734
#, possible-c-format
msgid "Switching to %s\n"
msgstr ""

#: linux-fork.c:747
msgid "Requires argument (checkpoint id to restart)"
msgstr ""

#: linux-fork.c:750
#, possible-c-format
msgid "Not found: checkpoint id %s"
msgstr ""

#. Checkpoint command: create a fork of the inferior process
#. and set it aside for later debugging.
#: linux-fork.c:761
msgid "Fork a duplicate process (experimental)."
msgstr ""

#. Restart command: restore the context of a specified checkpoint
#. process.
#: linux-fork.c:767
msgid ""
"Restore program context from a checkpoint.\n"
"Usage: restart N\n"
"Argument N is checkpoint ID, as displayed by 'info checkpoints'."
msgstr ""

#. Delete checkpoint command: kill the process and remove it from
#. the fork list.
#: linux-fork.c:775
msgid "Delete a checkpoint (experimental)."
msgstr ""

#. Detach checkpoint command: release the process to run independently,
#. and remove it from the fork list.
#: linux-fork.c:782
msgid "Detach from a checkpoint (experimental)."
msgstr ""

#: linux-fork.c:790
msgid "IDs of currently known checkpoints."
msgstr ""

#: linux-nat.c:197
#, possible-c-format
msgid "Debugging of GNU/Linux lwp module is %s.\n"
msgstr ""

#: linux-nat.c:496
msgid "Couldn't do single step"
msgstr ""

#: linux-nat.c:498
msgid "Couldn't wait vfork process"
msgstr ""

#: linux-nat.c:1221
msgid "Unable to attach: program exited normally."
msgstr ""

#: linux-nat.c:1223
#, possible-c-format
msgid "Unable to attach: program exited with code %d."
msgstr ""

#: linux-nat.c:1234
#, possible-c-format
msgid "Unable to attach: program terminated with signal %s, %s."
msgstr ""

#: linux-nat.c:1241
#, possible-c-format
msgid "unexpected status %d for PID %ld"
msgstr ""

#: linux-nat.c:1958
msgid "waiting for new child"
msgstr ""

#: linux-nat.c:1961
#, possible-c-format
msgid "wait returned unexpected PID %d"
msgstr ""

#: linux-nat.c:1964
#, possible-c-format
msgid "wait returned unexpected status 0x%x"
msgstr ""

#: linux-nat.c:4023 linux-nat.c:4036
#, possible-c-format
msgid "Could not parse signal set: %s"
msgstr ""

#: linux-nat.c:4068
#, possible-c-format
msgid "Could not open %s"
msgstr ""

#: linux-nat.c:4542
msgid "Set debugging of GNU/Linux lwp module."
msgstr ""

#: linux-nat.c:4543
msgid "Show debugging of GNU/Linux lwp module."
msgstr ""

#: linux-nat.c:4551
msgid "Set debugging of GNU/Linux namespaces module."
msgstr ""

#: linux-nat.c:4552
msgid "Show debugging of GNU/Linux namespaces module."
msgstr ""

#: linux-record.c:258
msgid ""
"The next instruction is syscall exit.  It will make the program exit.  Do "
"you want to stop the program?"
msgstr ""

#: linux-record.c:495
msgid ""
"Process record and replay target doesn't support ioctl request "
"TIOCSERGSTRUCT\n"
msgstr ""

#: linux-record.c:501
#, possible-c-format
msgid "Process record and replay target doesn't support ioctl request 0x%s.\n"
msgstr ""

#: linux-record.c:657
msgid ""
"The next instruction is syscall reboot.  It will restart the computer.  Do "
"you want to stop the program?"
msgstr ""

#: linux-record.c:680
#, possible-c-format
msgid ""
"The next instruction is syscall munmap.\n"
"It will free the memory addr = 0x%s len = %u.\n"
"It will make record target cannot record some memory change.\n"
"Do you want to stop the program?"
msgstr ""

#: linux-record.c:1011
#, possible-c-format
msgid "Process record and replay target doesn't support socketcall call 0x%s\n"
msgstr ""

#. XXX RECORD_SEMCTL still not supported.
#: linux-record.c:1151
#, possible-c-format
msgid "Process record and replay target doesn't support ipc number %s\n"
msgstr ""

#: linux-record.c:1741
msgid ""
"The next instruction is syscall exit_group.  It will make the program exit.  "
"Do you want to stop the program?"
msgstr ""

#: linux-record.c:2035 ppc-linux-tdep.c:1420
#, possible-c-format
msgid "Process record and replay target doesn't support syscall number %d\n"
msgstr ""

#: linux-tdep.c:489
msgid "Could not compile regex to match /dev/zero filename"
msgstr ""

#: linux-tdep.c:497
msgid "Could not compile regex to match shmem filenames"
msgstr ""

#: linux-tdep.c:513
msgid "Could not compile regex to match '<file> (deleted)'"
msgstr ""

#: linux-tdep.c:765
msgid "Can't determine the current process's PID: you must name one."
msgstr ""

#: linux-tdep.c:772
#, possible-c-format
msgid "Too many parameters: %s"
msgstr ""

#: linux-tdep.c:774
#, possible-c-format
msgid "process %ld\n"
msgstr ""

#: linux-tdep.c:795 linux-tdep.c:877 linux-tdep.c:887 linux-tdep.c:1023
#: linux-tdep.c:2285 nat/linux-procfs.c:40 nat/linux-procfs.c:137
#: sparc64-tdep.c:337
#, possible-c-format
msgid "unable to open /proc file '%s'"
msgstr ""

#: linux-tdep.c:805 linux-tdep.c:815
#, possible-c-format
msgid "unable to read link '%s'"
msgstr ""

#: linux-tdep.c:898
#, possible-c-format
msgid "Process: %s\n"
msgstr ""

#: linux-tdep.c:917
#, possible-c-format
msgid "State: %c\n"
msgstr ""

#: linux-tdep.c:920
#, possible-c-format
msgid "Parent process: %s\n"
msgstr ""

#: linux-tdep.c:923
#, possible-c-format
msgid "Process group: %s\n"
msgstr ""

#: linux-tdep.c:926
#, possible-c-format
msgid "Session id: %s\n"
msgstr ""

#: linux-tdep.c:929
#, possible-c-format
msgid "TTY: %s\n"
msgstr ""

#: linux-tdep.c:932
#, possible-c-format
msgid "TTY owner process group: %s\n"
msgstr ""

#: linux-tdep.c:936
#, possible-c-format
msgid "Flags: %s\n"
msgstr ""

#: linux-tdep.c:939
#, possible-c-format
msgid "Minor faults (no memory page): %s\n"
msgstr ""

#: linux-tdep.c:942
#, possible-c-format
msgid "Minor faults, children: %s\n"
msgstr ""

#: linux-tdep.c:945
#, possible-c-format
msgid "Major faults (memory page faults): %s\n"
msgstr ""

#: linux-tdep.c:948
#, possible-c-format
msgid "Major faults, children: %s\n"
msgstr ""

#: linux-tdep.c:951
#, possible-c-format
msgid "utime: %s\n"
msgstr ""

#: linux-tdep.c:954
#, possible-c-format
msgid "stime: %s\n"
msgstr ""

#: linux-tdep.c:957
#, possible-c-format
msgid "utime, children: %s\n"
msgstr ""

#: linux-tdep.c:960
#, possible-c-format
msgid "stime, children: %s\n"
msgstr ""

#: linux-tdep.c:963
#, possible-c-format
msgid "jiffies remaining in current time slice: %s\n"
msgstr ""

#: linux-tdep.c:967
#, possible-c-format
msgid "'nice' value: %s\n"
msgstr ""

#: linux-tdep.c:970
#, possible-c-format
msgid "jiffies until next timeout: %s\n"
msgstr ""

#: linux-tdep.c:973
#, possible-c-format
msgid "jiffies until next SIGALRM: %s\n"
msgstr ""

#: linux-tdep.c:976
#, possible-c-format
msgid "start time (jiffies since system boot): %s\n"
msgstr ""

#: linux-tdep.c:980
#, possible-c-format
msgid "Virtual memory size: %s\n"
msgstr ""

#: linux-tdep.c:983
#, possible-c-format
msgid "Resident set size: %s\n"
msgstr ""

#: linux-tdep.c:986
#, possible-c-format
msgid "rlim: %s\n"
msgstr ""

#: linux-tdep.c:989
#, possible-c-format
msgid "Start of text: %s\n"
msgstr ""

#: linux-tdep.c:992
#, possible-c-format
msgid "End of text: %s\n"
msgstr ""

#: linux-tdep.c:995
#, possible-c-format
msgid "Start of stack: %s\n"
msgstr ""

#: linux-tdep.c:1000
#, possible-c-format
msgid "Kernel stack pointer: %s\n"
msgstr ""

#: linux-tdep.c:1003
#, possible-c-format
msgid "Kernel instr pointer: %s\n"
msgstr ""

#: linux-tdep.c:1006
#, possible-c-format
msgid "Pending signals bitmap: %s\n"
msgstr ""

#: linux-tdep.c:1009
#, possible-c-format
msgid "Blocked signals bitmap: %s\n"
msgstr ""

#: linux-tdep.c:1012
#, possible-c-format
msgid "Ignored signals bitmap: %s\n"
msgstr ""

#: linux-tdep.c:1015
#, possible-c-format
msgid "Catched signals bitmap: %s\n"
msgstr ""

#: linux-tdep.c:1018
#, possible-c-format
msgid "wchan (system call): %s\n"
msgstr ""

#: linux-tdep.c:1064
msgid "malformed note - does not end with \\0"
msgstr ""

#: linux-tdep.c:1073
msgid "malformed note - too short for supplied file count"
msgstr ""

#: linux-tdep.c:1097
msgid "malformed note - filenames end too early"
msgstr ""

#: linux-tdep.c:1144
msgid "unable to find command name in core file"
msgstr ""

#: linux-tdep.c:1151
msgid "unable to handle request"
msgstr ""

#: linux-tdep.c:1287
#, possible-c-format
msgid "Error parsing {s,}maps file '%s'"
msgstr ""

#: linux-tdep.c:1307
#, possible-c-format
msgid "Error parsing {s,}maps file '%s' number"
msgstr ""

#: linux-tdep.c:2354
#, possible-c-format
msgid "Failed inferior mmap call for %s bytes, errno is changed."
msgstr ""

#: linux-tdep.c:2383
#, possible-c-format
msgid "Failed inferior munmap call at %s for %s bytes, errno is changed."
msgstr ""

#: linux-tdep.c:2404
msgid "Cannot find AT_ENTRY auxiliary vector entry."
msgstr ""

#: linux-tdep.c:2449
#, possible-c-format
msgid "Use of /proc/PID/coredump_filter file to generate corefiles is %s.\n"
msgstr ""

#: linux-tdep.c:2460
#, possible-c-format
msgid "Dumping of mappings marked with the VM_DONTDUMP flag is %s.\n"
msgstr ""

#: linux-tdep.c:2499
msgid "Set whether gcore should consider /proc/PID/coredump_filter."
msgstr ""

#: linux-tdep.c:2501
msgid "Show whether gcore should consider /proc/PID/coredump_filter."
msgstr ""

#: linux-tdep.c:2503
msgid ""
"Use this command to set whether gcore should consider the contents\n"
"of /proc/PID/coredump_filter when generating the corefile.  For more "
"information\n"
"about this file, refer to the manpage of core(5)."
msgstr ""

#: linux-tdep.c:2511
msgid ""
"Set whether gcore should dump mappings marked with the VM_DONTDUMP flag."
msgstr ""

#: linux-tdep.c:2513
msgid ""
"Show whether gcore should dump mappings marked with the VM_DONTDUMP flag."
msgstr ""

#: linux-tdep.c:2515
msgid ""
"Use this command to set whether gcore should dump mappings marked with the\n"
"VM_DONTDUMP flag (\"dd\" in /proc/PID/smaps) when generating the corefile.  "
"For\n"
"more information about this file, refer to the manpage of proc(5) and "
"core(5)."
msgstr ""

#: linux-thread-db.c:82
msgid "multi-threaded child process."
msgstr ""

#: linux-thread-db.c:83
msgid "Threads and pthreads support."
msgstr ""

#: linux-thread-db.c:128
#, possible-c-format
msgid "Auto-loading of inferior specific libthread_db is %s.\n"
msgstr ""

#: linux-thread-db.c:152
#, possible-c-format
msgid "libthread-db debugging is %s.\n"
msgstr ""

#: linux-thread-db.c:286
#, possible-c-format
msgid "Cannot deregister process %d from libthread_db: %s"
msgstr ""

#: linux-thread-db.c:416
#, possible-c-format
msgid "Cannot find user-level thread for LWP %ld: %s"
msgstr ""

#: linux-thread-db.c:421
#, possible-c-format
msgid "thread_get_info_callback: cannot get thread info: %s"
msgstr ""

#: linux-thread-db.c:457
#, possible-c-format
msgid "Symbol \"%s\" not found in libthread_db: %s"
msgstr ""

#: linux-thread-db.c:532
msgid "Warning: couldn't activate thread debugging using libthread_db: "
msgstr ""

#: linux-thread-db.c:621
#, possible-c-format
msgid "%s failed: %s"
msgstr ""

#. Some platforms require execution for td_ta_map_lwp2thr.
#: linux-thread-db.c:659
msgid "; can't map_lwp2thr"
msgstr ""

#: linux-thread-db.c:731
msgid "Running libthread_db integrity checks:\n"
msgstr ""

#: linux-thread-db.c:772
#, possible-c-format
msgid "td_ta_thr_iter failed: %s"
msgstr ""

#: linux-thread-db.c:775
msgid "no threads seen"
msgstr ""

#: linux-thread-db.c:783
msgid "libthread_db integrity checks failed: "
msgstr ""

#: linux-thread-db.c:789
msgid "libthread_db integrity checks passed.\n"
msgstr ""

#: linux-thread-db.c:830
#, possible-c-format
msgid "Cannot initialize libthread_db: %s"
msgstr ""

#: linux-thread-db.c:845
#, possible-c-format
msgid "td_ta_new failed: %s\n"
msgstr ""

#: linux-thread-db.c:859
#, possible-c-format
msgid "td_ta_new failed: %s"
msgstr ""

#: linux-thread-db.c:921 sol-thread.c:647
msgid "[Thread debugging using libthread_db enabled]\n"
msgstr ""

#: linux-thread-db.c:938
#, possible-c-format
msgid "Using host libthread_db library \"%ps\".\n"
msgstr ""

#: linux-thread-db.c:961
#, possible-c-format
msgid "Trying host libthread_db library: %s.\n"
msgstr ""

#: linux-thread-db.c:971
#, possible-c-format
msgid "open failed: %s.\n"
msgstr ""

#: linux-thread-db.c:976
#, possible-c-format
msgid ""
"auto-load: Loading libthread-db library \"%s\" from explicit directory.\n"
msgstr ""

#: linux-thread-db.c:987
#, possible-c-format
msgid "dlopen failed: %s.\n"
msgstr ""

#: linux-thread-db.c:1001
#, possible-c-format
msgid "Host %s resolved to: %s.\n"
msgstr ""

#: linux-thread-db.c:1032
#, possible-c-format
msgid "Expected absolute pathname for libpthread in the inferior, but got %ps."
msgstr ""

#: linux-thread-db.c:1161
#, possible-c-format
msgid "thread_db_load_search returning %d\n"
msgstr ""

#: linux-thread-db.c:1206
msgid ""
"Unable to find libthread_db matching inferior's thread library, thread "
"debugging will not be available."
msgstr ""

#: linux-thread-db.c:1296
msgid ""
"Target and debugger are in different PID namespaces; thread lists and other "
"data are likely unreliable.  Connect to gdbserver inside the container."
msgstr ""

#: linux-thread-db.c:1446
#, possible-c-format
msgid "find_new_threads_callback: cannot get thread info: %s"
msgstr ""

#: linux-thread-db.c:1537
#, possible-c-format
msgid "Found %d new threads in iteration %d.\n"
msgstr ""

#: linux-thread-db.c:1580
#, possible-c-format
msgid "Cannot find new threads: %s"
msgstr ""

#: linux-thread-db.c:1690
#, possible-c-format
msgid "Thread handle size mismatch: %d vs %zu (from libthread_db)"
msgstr ""

#: linux-thread-db.c:1752
msgid "No TLS library support"
msgstr ""

#: linux-thread-db.c:1767
msgid "TLS load module not found"
msgstr ""

#: linux-thread-db.c:1786
msgid "TLS not allocated yet"
msgstr ""

#: linux-thread-db.c:1864
msgid "'info auto-load libthread-db' does not accept any parameters"
msgstr ""

#: linux-thread-db.c:1942
msgid "No auto-loaded libthread-db.\n"
msgstr ""

#: linux-thread-db.c:1958
msgid "No libthread_db loaded"
msgstr ""

#: linux-thread-db.c:1976
msgid "Set search path for libthread_db."
msgstr ""

#: linux-thread-db.c:1977
msgid "Show the current search path or libthread_db."
msgstr ""

#: linux-thread-db.c:1978
msgid ""
"This path is used to search for libthread_db to be loaded into gdb itself.\n"
"Its value is a colon (':') separate list of directories to search.\n"
"Setting the search path to an empty list resets it to its default value."
msgstr ""

#: linux-thread-db.c:1988
msgid "Set libthread-db debugging."
msgstr ""

#: linux-thread-db.c:1989
msgid "Show libthread-db debugging."
msgstr ""

#: linux-thread-db.c:1990
msgid "When non-zero, libthread-db debugging is enabled."
msgstr ""

#: linux-thread-db.c:1997
msgid "Enable or disable auto-loading of inferior specific libthread_db."
msgstr ""

#: linux-thread-db.c:1998
msgid "Show whether auto-loading inferior specific libthread_db is enabled."
msgstr ""

#: linux-thread-db.c:1999
msgid ""
"If enabled, libthread_db will be searched in 'set libthread-db-search-path'\n"
"locations to load libthread_db compatible with the inferior.\n"
"Standard system libthread_db still gets loaded even with this option off.\n"
"This option has security implications for untrusted inferiors."
msgstr ""

#: linux-thread-db.c:2009
msgid ""
"Print the list of loaded inferior specific libthread_db.\n"
"Usage: info auto-load libthread-db"
msgstr ""

#: linux-thread-db.c:2014
msgid "Run integrity checks on the current inferior's libthread_db."
msgstr ""

#: linux-thread-db.c:2020
msgid "Set whether to check libthread_db at load time."
msgstr ""

#: linux-thread-db.c:2021
msgid "Show whether to check libthread_db at load time."
msgstr ""

#: linux-thread-db.c:2022
msgid ""
"If enabled GDB will run integrity checks on inferior specific libthread_db\n"
"as they are loaded."
msgstr ""

#: lm32-tdep.c:362
msgid "lm32_store_return_value: type length too large."
msgstr ""

#: location.c:495 location.c:653
#, possible-c-format
msgid "Unmatched quote, %s."
msgstr ""

#: location.c:838
#, possible-c-format
msgid "invalid explicit location argument, \"%s\""
msgstr ""

#: location.c:856
#, possible-c-format
msgid "missing argument for \"%s\""
msgstr ""

#: location.c:867
msgid "Source filename requires function, label, or line offset."
msgstr ""

#: m2-exp.y:278 m2-exp.y:282 m2-exp.y:286 m2-exp.y:290 m2-exp.y:292
msgid "Sets are not implemented."
msgstr ""

#: m2-exp.y:590
msgid "No symbol table is loaded.  Use the \"symbol-file\" command."
msgstr ""

#: m2-exp.y:655
msgid "Floating point numbers must be base 10."
msgstr ""

#: m2-exp.y:657
#, possible-c-format
msgid "Invalid digit '%c' in number."
msgstr ""

#: m2-exp.y:665
#, possible-c-format
msgid "Invalid digit '%c' in octal number."
msgstr ""

#: m2-exp.y:706
msgid "Overflow on numeric constant -- number too large."
msgstr ""

#: m2-exp.y:871
msgid "Unterminated string or character constant."
msgstr ""

#: m2-exp.y:1003
msgid "internal:  Undefined class in m2lex()"
msgstr ""

#: m2-exp.y:1007
msgid "internal:  Unforseen case in m2lex()"
msgstr ""

#: m2-exp.y:1010
msgid "unhandled token in m2lex()"
msgstr ""

#: m2-lang.c:228
msgid "unbounded structure missing _m2_high field"
msgstr ""

#: m2-lang.c:256
msgid "internal error: unbounded array structure is unknown"
msgstr ""

#: m2-lang.c:262
msgid "unbounded structure missing _m2_contents field"
msgstr ""

#: m2-typeprint.c:119
msgid "method"
msgstr ""

#. i18n: Do not translate the "struct" part!
#: m2-typeprint.c:139
msgid "undef"
msgstr ""

#: m2-typeprint.c:143
msgid "error"
msgstr ""

#: m2-typeprint.c:270
msgid "is unknown"
msgstr ""

#: m2-typeprint.c:424
msgid "long_set failed to find discrete bounds for its subtype"
msgstr ""

#: m2-typeprint.c:427 m2-valprint.c:65
msgid "expecting long_set"
msgstr ""

#. i18n: Do not translate the "SET OF" part!
#: m2-typeprint.c:472
msgid "SET OF <unknown>"
msgstr ""

#. i18n: Do not translate "CASE" and "OF".
#: m2-typeprint.c:559
msgid "CASE <variant> OF\n"
msgstr ""

#: m2-valprint.c:97
msgid "<unknown bounds of set>"
msgstr ""

#: m2-valprint.c:111
msgid "bit test is out of range"
msgstr ""

#. This happens (without TYPE_STUB set) on systems which don't use
#. dbx xrefs (NO_DBX_XREFS in gcc) if a file has a "struct foo *bar"
#. and no complete type for struct foo in that file.
#: m2-valprint.c:413 valprint.c:993 valprint.c:1052
msgid "<incomplete type>"
msgstr ""

#: m2-valprint.c:429
msgid "<error value>"
msgstr ""

#: m32c-tdep.c:2205
msgid ""
"The return value is stored in memory at 'mem0', but GDB cannot find\n"
"its address."
msgstr ""

#: m32c-tdep.c:2237
msgid ""
"The return value is stored in memory at 'mem0', but GDB cannot find\n"
" its address."
msgstr ""

#: m32c-tdep.c:2417
#, possible-c-format
msgid ""
"Cannot convert code address %s to function pointer:\n"
"couldn't find a symbol at that address, to find trampoline."
msgstr ""

#: m32c-tdep.c:2451
#, possible-c-format
msgid ""
"Cannot convert code address %s to function pointer:\n"
"couldn't find trampoline named '%s.plt'.\n"
"Returning pointer value %s instead; this may produce\n"
"a useful result if converted back into an address by GDB,\n"
"but will most likely not be useful otherwise."
msgstr ""

#: m68hc11-tdep.c:254
msgid ""
"No frame soft register found in the symbol table.\n"
"Stack backtrace will not work."
msgstr ""

#: m68hc11-tdep.c:1247
msgid "return of value > 4 is not supported."
msgstr ""

#: m68hc11-tdep.c:1284 s12z-tdep.c:605 sh-tdep.c:1331
msgid "bad size for return value"
msgstr ""

#: m68k-tdep.c:174
#, possible-c-format
msgid "m68k_register_name: illegal register number %d"
msgstr ""

#: m68k-tdep.c:1018
msgid "m68k_get_longjmp_target: not implemented"
msgstr ""

#. Unexpected empty N_SO.
#: machoread.c:192
msgid "Unexpected empty N_SO stab"
msgstr ""

#. Debugging symbols are not expected here.
#: machoread.c:209
#, possible-c-format
msgid "%s: Unexpected debug stab outside SO markers"
msgstr ""

#. Unexpected empty N_SO.
#: machoread.c:226
msgid "Empty SO section"
msgstr ""

#: machoread.c:236
msgid "Three SO in a raw"
msgstr ""

#: machoread.c:245
#, possible-c-format
msgid "stabs debugging not supported for %s"
msgstr ""

#: machoread.c:257
msgid "Unexpected stab after SO"
msgstr ""

#: machoread.c:274
msgid "Missing nul SO"
msgstr ""

#: machoread.c:302
msgid "unhandled stab for dwarf OSO file"
msgstr ""

#: machoread.c:308
msgid "non-debugging symbol within SO"
msgstr ""

#: machoread.c:314
msgid "missing nul SO"
msgstr ""

#: machoread.c:399
#, possible-c-format
msgid "can't find symbol '%s' in minsymtab"
msgstr ""

#: machoread.c:426
#, possible-c-format
msgid "Loading debugging symbols from oso: %s\n"
msgstr ""

#: machoread.c:430 symfile.c:1761
#, possible-c-format
msgid "`%s': can't read symbols: %s."
msgstr ""

#: machoread.c:437
#, possible-c-format
msgid "`%s': file time stamp mismatch."
msgstr ""

#: machoread.c:445
#, possible-c-format
msgid "`%s': can't create hash table"
msgstr ""

#: machoread.c:492
#, possible-c-format
msgid "Duplicated symbol %s in symbol table"
msgstr ""

#: machoread.c:499
#, possible-c-format
msgid "Adding symbol %s (addr: %s)\n"
msgstr ""

#: machoread.c:573
#, possible-c-format
msgid "resolve sect %s with %s (set to %s)\n"
msgstr ""

#: machoread.c:646
#, possible-c-format
msgid "Could not open OSO archive file \"%s\""
msgstr ""

#: machoread.c:653
#, possible-c-format
msgid "OSO archive file \"%s\" not an archive."
msgstr ""

#: machoread.c:664
#, possible-c-format
msgid "Could not read archive members out of OSO archive \"%s\""
msgstr ""

#: machoread.c:702
#, possible-c-format
msgid "Could not find specified archive member for OSO name \"%s\""
msgstr ""

#: machoread.c:711 symfile.c:1754
#, possible-c-format
msgid "`%s': can't open to read symbols: %s."
msgstr ""

#: machoread.c:755 machoread.c:774
#, possible-c-format
msgid "can't find UUID in %s"
msgstr ""

#: machoread.c:761
#, possible-c-format
msgid "can't open dsym file %s"
msgstr ""

#: machoread.c:767
#, possible-c-format
msgid "bad dsym file format: %s"
msgstr ""

#: machoread.c:780
#, possible-c-format
msgid "dsym file UUID doesn't match the one in %s"
msgstr ""

#: machoread.c:847
msgid "dsym file found\n"
msgstr ""

#: machoread.c:891
#, possible-c-format
msgid "Relocate section '%s' of %s\n"
msgstr ""

#: machoread.c:976
msgid "Set if printing Mach-O symbols processing."
msgstr ""

#: machoread.c:977
msgid "Show if printing Mach-O symbols processing."
msgstr ""

#: macrocmd.c:68
msgid ""
"You must follow the `macro expand' command with the expression you\n"
"want to expand."
msgstr ""

#: macrocmd.c:97
msgid ""
"You must follow the `macro expand-once' command with the expression\n"
"you want to expand."
msgstr ""

#: macrocmd.c:131
msgid "  included at "
msgstr ""

#: macrocmd.c:211
msgid ""
"You must follow the `info macro' command with the name of the macro\n"
"whose definition you want to see."
msgstr ""

#: macrocmd.c:352
msgid "usage: macro define NAME[(ARGUMENT-LIST)] [REPLACEMENT-LIST]"
msgstr ""

#: macrocmd.c:357 macrocmd.c:429
msgid "Invalid macro name."
msgstr ""

#: macrocmd.c:385
msgid "Macro is missing an argument."
msgstr ""

#: macrocmd.c:391
msgid "Two macro arguments with identical names."
msgstr ""

#: macrocmd.c:401
msgid "',' or ')' expected at end of macro arguments."
msgstr ""

#: macrocmd.c:424
msgid "usage: macro undef NAME"
msgstr ""

#: macrocmd.c:467
msgid "Prefix for commands dealing with C preprocessor macros."
msgstr ""

#: macrocmd.c:470
msgid ""
"Fully expand any C/C++ preprocessor macro invocations in EXPRESSION.\n"
"Show the expanded expression."
msgstr ""

#: macrocmd.c:475
msgid ""
"Expand C/C++ preprocessor macro invocations appearing directly in "
"EXPRESSION.\n"
"Show the expanded expression.\n"
"\n"
"This command differs from `macro expand' in that it only expands macro\n"
"invocations that appear directly in EXPRESSION; if expanding a macro\n"
"introduces further macro invocations, those are left unexpanded.\n"
"\n"
"`macro expand-once' helps you see how a particular macro expands,\n"
"whereas `macro expand' shows you how all the macros involved in an\n"
"expression work together to yield a pre-processed expression."
msgstr ""

#: macrocmd.c:490
msgid ""
"Show the definition of MACRO, and it's source location.\n"
"Usage: info macro [-a|-all] [--] MACRO\n"
"Options: \n"
"  -a, --all    Output all definitions of MACRO in the current compilation "
"unit.\n"
"  --           Specify the end of arguments and the beginning of the MACRO."
msgstr ""

#: macrocmd.c:498
msgid ""
"Show the definitions of all macros at LINESPEC, or the current source "
"location.\n"
"Usage: info macros [LINESPEC]"
msgstr ""

#: macrocmd.c:502
msgid ""
"Define a new C/C++ preprocessor macro.\n"
"The GDB command `macro define DEFINITION' is equivalent to placing a\n"
"preprocessor directive of the form `#define DEFINITION' such that the\n"
"definition is visible in all the inferior's source files.\n"
"For example:\n"
"  (gdb) macro define PI (3.1415926)\n"
"  (gdb) macro define MIN(x,y) ((x) < (y) ? (x) : (y))"
msgstr ""

#: macrocmd.c:512
msgid ""
"Remove the definition of the C/C++ preprocessor macro with the given name."
msgstr ""

#: macrocmd.c:517
msgid "List all the macros defined using the `macro define' command."
msgstr ""

#: macroexp.c:247
msgid "Unterminated comment in macro expansion."
msgstr ""

#: macroexp.c:357
msgid "A character constant must contain at least one character."
msgstr ""

#: macroexp.c:417
msgid "Newline characters may not appear in string constants."
msgstr ""

#: macroexp.c:649
msgid "unable to avoid splicing tokens during macro expansion"
msgstr ""

#: macroexp.c:819
#, possible-c-format
msgid "Malformed argument list for macro `%s'."
msgstr ""

#: macroexp.c:1012
msgid "__VA_OPT__ cannot appear inside __VA_OPT__"
msgstr ""

#: macroexp.c:1021
msgid "__VA_OPT__ must be followed by an open parenthesis"
msgstr ""

#: macroexp.c:1042
msgid "__VA_OPT__ is only valid in a variadic macro"
msgstr ""

#: macroexp.c:1063
msgid "Stringification operator requires an argument."
msgstr ""

#: macroexp.c:1068
msgid "Argument to stringification operator must name a macro parameter."
msgstr ""

#: macroexp.c:1082
msgid "Stray splicing operator"
msgstr ""

#: macroexp.c:1114
msgid "Splicing operator at end of macro"
msgstr ""

#: macroexp.c:1208
msgid "Unterminated __VA_OPT__"
msgstr ""

#: macroexp.c:1300
#, possible-c-format
msgid "Wrong number of arguments to macro `%s' (expected %d, got %d)."
msgstr ""

#: macroexp.c:1331
msgid "bad macro definition kind"
msgstr ""

#: macroexp.c:1450
msgid "Expand-once not implemented yet."
msgstr ""

#: macroscope.c:79
#, possible-c-format
msgid ""
"symtab found for `%s', but that file\n"
"is not covered in the compilation unit's macro information"
msgstr ""

#: macrotab.c:479
#, possible-c-format
msgid "both `%s' and `%s' allegedly #included at %s:%d"
msgstr ""

#: macrotab.c:728
#, possible-c-format
msgid "macro `%s' redefined at %s:%d; original definition at %s:%d"
msgstr ""

#: macrotab.c:854
#, possible-c-format
msgid "macro '%s' is #undefined twice, at %s:%d and %s:%d"
msgstr ""

#: macrotab.c:873
#, possible-c-format
msgid "no definition for macro `%s' in scope to #undef at %s:%d"
msgstr ""

#: main.c:127 source.c:569
#, possible-c-format
msgid "%s is not a directory."
msgstr ""

#: main.c:433
#, possible-c-format
msgid "%s: '--readnow' and '--readnever' cannot be specified simultaneously"
msgstr ""

#: main.c:540
msgid "fatal error: libbfd ABI mismatch"
msgstr ""

#: main.c:557
msgid "error finding working directory"
msgstr ""

#: main.c:732
#, possible-c-format
msgid "%s: TUI mode is not supported"
msgstr ""

#: main.c:782
#, possible-c-format
msgid "%s: empty path for `--data-directory'"
msgstr ""

#: main.c:791
#, possible-c-format
msgid "%s: unable to load tclcommand file \"%s\""
msgstr ""

#: main.c:826
#, possible-c-format
msgid "could not set baud rate to `%s'."
msgstr ""

#: main.c:839
#, possible-c-format
msgid "could not set timeout limit to `%s'."
msgstr ""

#: main.c:861
#, possible-c-format
msgid "Use `%s --help' for a complete list of options."
msgstr ""

#: main.c:892
#, possible-c-format
msgid "%s: `--args' specified but no program specified"
msgstr ""

#: main.c:927
#, possible-c-format
msgid "Excess command line arguments ignored. (%s%s)\n"
msgstr ""

#: main.c:1009
msgid ""
"\n"
"warning: "
msgstr ""

#: main.c:1086
msgid "Can't attach to process and specify a core file at the same time."
msgstr ""

#. Error messages should no longer be distinguished with extra output.
#: main.c:1126
msgid "warning: "
msgstr ""

#: main.c:1137
#, possible-c-format
msgid "auto-load: Loading .gdbinit file \"%s\".\n"
msgstr ""

#. Note: The options in the list below are only approximately sorted
#. in the alphabetical order, so as to group closely related options
#. together.
#: main.c:1246
msgid ""
"This is the GNU debugger.  Usage:\n"
"\n"
"    gdb [options] [executable-file [core-file or process-id]]\n"
"    gdb [options] --args executable-file [inferior-arguments ...]\n"
"\n"
msgstr ""

#: main.c:1251
msgid ""
"Selection of debuggee and its files:\n"
"\n"
"  --args             Arguments after executable-file are passed to inferior\n"
"  --core=COREFILE    Analyze the core dump COREFILE.\n"
"  --exec=EXECFILE    Use EXECFILE as the executable.\n"
"  --pid=PID          Attach to running process PID.\n"
"  --directory=DIR    Search for source files in DIR.\n"
"  --se=FILE          Use FILE as symbol file and executable file.\n"
"  --symbols=SYMFILE  Read symbols from SYMFILE.\n"
"  --readnow          Fully read symbol files on first access.\n"
"  --readnever        Do not read symbol files.\n"
"  --write            Set writing into executable and core files.\n"
"\n"
msgstr ""

#: main.c:1264
msgid ""
"Initial commands and command files:\n"
"\n"
"  --command=FILE, -x Execute GDB commands from FILE.\n"
"  --init-command=FILE, -ix\n"
"                     Like -x but execute commands before loading inferior.\n"
"  --eval-command=COMMAND, -ex\n"
"                     Execute a single GDB command.\n"
"                     May be used multiple times and in conjunction\n"
"                     with --command.\n"
"  --init-eval-command=COMMAND, -iex\n"
"                     Like -ex but before loading inferior.\n"
"  --nh               Do not read ~/.gdbinit.\n"
"  --nx               Do not read any .gdbinit files in any directory.\n"
"\n"
msgstr ""

#: main.c:1278
msgid ""
"Output and user interface control:\n"
"\n"
"  --fullname         Output information used by emacs-GDB interface.\n"
"  --interpreter=INTERP\n"
"                     Select a specific interpreter / user interface\n"
"  --tty=TTY          Use TTY for input/output by the program being "
"debugged.\n"
"  -w                 Use the GUI interface.\n"
"  --nw               Do not use the GUI interface.\n"
msgstr ""

#: main.c:1288
msgid "  --tui              Use a terminal user interface.\n"
msgstr ""

#: main.c:1292
msgid ""
"  --dbx              DBX compatibility mode.\n"
"  -q, --quiet, --silent\n"
"                     Do not print version number on startup.\n"
"\n"
msgstr ""

#: main.c:1297
msgid ""
"Operating modes:\n"
"\n"
"  --batch            Exit after processing options.\n"
"  --batch-silent     Like --batch, but suppress all gdb stdout output.\n"
"  --return-child-result\n"
"                     GDB exit code will be the child's exit code.\n"
"  --configuration    Print details about GDB configuration and then exit.\n"
"  --help             Print this message and then exit.\n"
"  --version          Print version information and then exit.\n"
"\n"
"Remote debugging options:\n"
"\n"
"  -b BAUDRATE        Set serial port baud rate used for remote debugging.\n"
"  -l TIMEOUT         Set timeout in seconds for remote debugging.\n"
"\n"
"Other options:\n"
"\n"
"  --cd=DIR           Change current directory to DIR.\n"
"  --data-directory=DIR, -D\n"
"                     Set GDB's data-directory to DIR.\n"
msgstr ""

#: main.c:1314
msgid ""
"\n"
"At startup, GDB reads the following init files and executes their commands:\n"
msgstr ""

#: main.c:1326
#, possible-c-format
msgid "   * system-wide init files: %s\n"
msgstr ""

#: main.c:1331
#, possible-c-format
msgid "   * user-specific init file: %s\n"
msgstr ""

#: main.c:1335
#, possible-c-format
msgid "   * local init file (see also 'set auto-load local-gdbinit'): ./%s\n"
msgstr ""

#: main.c:1338
msgid ""
"\n"
"For more information, type \"help\" from within GDB, or consult the\n"
"GDB manual (available as on-line info or a printed manual).\n"
msgstr ""

#: main.c:1343
#, possible-c-format
msgid "Report bugs to \"%s\".\n"
msgstr ""

#: maint-test-options.c:152
#, possible-c-format
msgid ""
"-flag %d -xx1 %d -xx2 %d -bool %d -enum %s -uint %s -zuint-unl %s -string "
"'%s' -- %s\n"
msgstr ""

#: maint-test-options.c:180 maint-test-options.c:188 maint-test-options.c:193
msgid "A flag option."
msgstr ""

#. show_cmd_cb
#: maint-test-options.c:201
msgid "A boolean option."
msgstr ""

#. show_cmd_cb
#: maint-test-options.c:210
msgid "An enum option."
msgstr ""

#. show_cmd_cb
#: maint-test-options.c:218
msgid "A uinteger option."
msgstr ""

#. show_doc
#: maint-test-options.c:220
msgid ""
"A help doc that spawns\n"
"multiple lines."
msgstr ""

#. show_cmd_cb
#: maint-test-options.c:228
msgid "A zuinteger-unlimited option."
msgstr ""

#. show_cmd_cb
#: maint-test-options.c:238
msgid "A string option."
msgstr ""

#: maint-test-options.c:420
msgid ""
"\"maintenance test-options\" must be followed by the name of a subcommand.\n"
msgstr ""

#: maint-test-options.c:433
msgid "Generic command for testing the options infrastructure."
msgstr ""

#: maint-test-options.c:442
msgid ""
"Command used for testing options processing.\n"
"Usage: maint test-options require-delimiter [[OPTION]... --] [OPERAND]...\n"
"\n"
"Options:\n"
"%OPTIONS%\n"
"\n"
"If you specify any command option, you must use a double dash (\"--\")\n"
"to mark the end of option processing."
msgstr ""

#: maint-test-options.c:454
msgid ""
"Command used for testing options processing.\n"
"Usage: maint test-options unknown-is-error [OPTION]... [OPERAND]...\n"
"\n"
"Options:\n"
"%OPTIONS%"
msgstr ""

#: maint-test-options.c:463
msgid ""
"Command used for testing options processing.\n"
"Usage: maint test-options unknown-is-operand [OPTION]... [OPERAND]...\n"
"\n"
"Options:\n"
"%OPTIONS%"
msgstr ""

#: maint-test-options.c:494
msgid ""
"Show maintenance test-options completion result.\n"
"Shows the results of completing\n"
"\"maint test-options require-delimiter\",\n"
"\"maint test-options unknown-is-error\", or\n"
"\"maint test-options unknown-is-operand\"."
msgstr ""

#: maint-test-settings.c:35
msgid ""
"\"maintenance set test-settings\" must be followed by the name of a set "
"command.\n"
msgstr ""

#: maint-test-settings.c:108
msgid ""
"Set GDB internal variables used for set/show command infrastructure testing."
msgstr ""

#: maint-test-settings.c:116
msgid ""
"Show GDB internal variables used for set/show command infrastructure testing."
msgstr ""

#: maint-test-settings.c:124 maint-test-settings.c:125
#: maint-test-settings.c:134 maint-test-settings.c:135
#: maint-test-settings.c:144 maint-test-settings.c:145
#: maint-test-settings.c:154 maint-test-settings.c:155
#: maint-test-settings.c:164 maint-test-settings.c:165
#: maint-test-settings.c:175 maint-test-settings.c:176
#: maint-test-settings.c:186 maint-test-settings.c:187
#: maint-test-settings.c:196 maint-test-settings.c:197
#: maint-test-settings.c:206 maint-test-settings.c:207
#: maint-test-settings.c:216 maint-test-settings.c:217
#: maint-test-settings.c:227 maint-test-settings.c:228
#: maint-test-settings.c:238 maint-test-settings.c:239
msgid "command used for internal testing."
msgstr ""

#: maint.c:60
msgid ""
"\"maintenance\" must be followed by the name of a maintenance command.\n"
msgstr ""

#: maint.c:69
msgid "Should GDB dump core? "
msgstr ""

#: maint.c:121
msgid "This command has been moved to \"demangle\".\n"
msgstr ""

#: maint.c:128
msgid "\"maintenance time\" takes a numeric argument.\n"
msgstr ""

#: maint.c:149
msgid "\"maintenance info\" must be followed by the name of an info command.\n"
msgstr ""

#: maint.c:162
msgid ""
"\"maintenance check\" must be followed by the name of a check command.\n"
msgstr ""

#: maint.c:446
msgid "Exec file:\n"
msgstr ""

#: maint.c:464
#, possible-c-format
msgid "  Object file: %s\n"
msgstr ""

#: maint.c:481
msgid "Core file:\n"
msgstr ""

#: maint.c:509 regcache-dump.c:231
msgid "maintenance print architecture"
msgstr ""

#: maint.c:521
msgid ""
"\"maintenance print\" must be followed by the name of a print command.\n"
msgstr ""

#: maint.c:541
msgid "requires argument (address or section + address)"
msgstr ""

#. End of command?
#: maint.c:551
msgid "Need to specify section name and address"
msgstr ""

#: maint.c:563
#, possible-c-format
msgid "Unknown section %s."
msgstr ""

#: maint.c:593
#, possible-c-format
msgid "%s + %s in section %s of %s\n"
msgstr ""

#: maint.c:597
#, possible-c-format
msgid "%s + %s in section %s\n"
msgstr ""

#: maint.c:601
#, possible-c-format
msgid "%s + %s\n"
msgstr ""

#: maint.c:604
#, possible-c-format
msgid "no symbol at %s:%s\n"
msgstr ""

#: maint.c:607
#, possible-c-format
msgid "no symbol at %s\n"
msgstr ""

#: maint.c:622
msgid ""
"\"maintenance deprecate\" takes an argument,\n"
"the command you want to deprecate, and optionally the replacement command\n"
"enclosed in quotes.\n"
msgstr ""

#: maint.c:636
msgid ""
"\"maintenance undeprecate\" takes an argument, \n"
"the command you want to undeprecate.\n"
msgstr ""

#: maint.c:667
#, possible-c-format
msgid "Can't find command '%s' to deprecate.\n"
msgstr ""

#: maint.c:745
msgid "\"maintenance set\" must be followed by the name of a set command.\n"
msgstr ""

#: maint.c:782
#, possible-c-format
msgid "Internal profiling is %s.\n"
msgstr ""

#: maint.c:844
msgid "Profiling support is not available on this system."
msgstr ""

#: maint.c:964
msgid "command finished"
msgstr ""

#: maint.c:977
#, possible-c-format
msgid "Startup time: %.6f (cpu), %.6f (wall)\n"
msgstr ""

#: maint.c:978
#, possible-c-format
msgid "Command execution time: %.6f (cpu), %.6f (wall)\n"
msgstr ""

#: maint.c:992
#, possible-c-format
msgid "Space used: %ld (%s%ld during startup)\n"
msgstr ""

#: maint.c:993
#, possible-c-format
msgid "Space used: %ld (%s%ld for this command)\n"
msgstr ""

#: maint.c:1005
#, possible-c-format
msgid "#symtabs: %d (+%d), #compunits: %d (+%d), #blocks: %d (+%d)\n"
msgstr ""

#: maint.c:1041
msgid "command started"
msgstr ""

#: maint.c:1095
msgid "Bad value for 'mt set per-command no'."
msgstr ""

#: maint.c:1148
msgid ""
"Commands for use by GDB maintainers.\n"
"Includes commands to dump specific internal GDB structures in\n"
"a human readable form, to cause GDB to deliberately dump core, etc."
msgstr ""

#: maint.c:1157
msgid "Commands for showing internal info about the program being debugged."
msgstr ""

#: maint.c:1163
msgid ""
"List the BFD sections of the exec and core files.\n"
"Arguments may be any combination of:\n"
"\t[one or more section names]\n"
"\tALLOC LOAD RELOC READONLY CODE DATA ROM CONSTRUCTOR\n"
"\tHAS_CONTENTS NEVER_LOAD COFF_SHARED_LIBRARY IS_COMMON\n"
"Sections matching any argument will be listed (no argument\n"
"implies all sections).  In addition, the special argument\n"
"\tALLOBJ\n"
"lists all sections from all object files, including shared libraries."
msgstr ""

#: maint.c:1176
msgid "Maintenance command for printing GDB internal state."
msgstr ""

#: maint.c:1180
msgid ""
"Set GDB internal variables used by the GDB maintainer.\n"
"Configure variables internal to GDB that aid in GDB's maintenance"
msgstr ""

#: maint.c:1187
msgid ""
"Show GDB internal variables used by the GDB maintainer.\n"
"Configure variables internal to GDB that aid in GDB's maintenance"
msgstr ""

#: maint.c:1194
msgid ""
"Like \"with\", but works with \"maintenance set\" variables.\n"
"Usage: maintenance with SETTING [VALUE] [-- COMMAND]\n"
"With no COMMAND, repeats the last executed command.\n"
"SETTING is any setting you can change with the \"maintenance set\"\n"
"subcommands."
msgstr ""

#: maint.c:1204
msgid ""
"Get fatal error; make debugger dump its core.\n"
"GDB sets its handling of SIGQUIT back to SIG_DFL and then sends\n"
"itself a SIGQUIT signal."
msgstr ""

#: maint.c:1212
msgid ""
"Give GDB an internal error.\n"
"Cause GDB to behave as if an internal error was detected."
msgstr ""

#: maint.c:1218
msgid ""
"Give GDB an internal warning.\n"
"Cause GDB to behave as if an internal warning was reported."
msgstr ""

#: maint.c:1224
msgid ""
"Give GDB a demangler warning.\n"
"Cause GDB to behave as if a demangler warning was reported."
msgstr ""

#: maint.c:1229
msgid "This command has been moved to \"demangle\"."
msgstr ""

#: maint.c:1234
msgid "Per-command statistics settings."
msgstr ""

#. allow-unknown
#: maint.c:1239
msgid "Show per-command statistics settings."
msgstr ""

#: maint.c:1245
msgid "Set whether to display per-command execution time."
msgstr ""

#: maint.c:1246
msgid "Show whether to display per-command execution time."
msgstr ""

#: maint.c:1248
msgid ""
"If enabled, the execution time for each command will be\n"
"displayed following the command's output."
msgstr ""

#: maint.c:1255
msgid "Set whether to display per-command space usage."
msgstr ""

#: maint.c:1256
msgid "Show whether to display per-command space usage."
msgstr ""

#: maint.c:1258
msgid ""
"If enabled, the space usage for each command will be\n"
"displayed following the command's output."
msgstr ""

#: maint.c:1265
msgid "Set whether to display per-command symtab statistics."
msgstr ""

#: maint.c:1266
msgid "Show whether to display per-command symtab statistics."
msgstr ""

#: maint.c:1268
msgid ""
"If enabled, the basic symtab statistics for each command will be\n"
"displayed following the command's output."
msgstr ""

#. This is equivalent to "mt set per-command time on".
#. Kept because some people are used to typing "mt time 1".
#: maint.c:1276
msgid ""
"Set the display of time usage.\n"
"If nonzero, will cause the execution time for each command to be\n"
"displayed, following the command's output."
msgstr ""

#. This is equivalent to "mt set per-command space on".
#. Kept because some people are used to typing "mt space 1".
#: maint.c:1284
msgid ""
"Set the display of space usage.\n"
"If nonzero, will cause the execution space for each command to be\n"
"displayed, following the command's output."
msgstr ""

#: maint.c:1290
msgid ""
"Print a type chain for a given symbol.\n"
"For each node in a type chain, print the raw data for each member of\n"
"the type structure, and the interpretation of the data."
msgstr ""

#: maint.c:1297
msgid "Print statistics about internal gdb state."
msgstr ""

#: maint.c:1301
msgid ""
"Print the internal architecture configuration.\n"
"Takes an optional file parameter."
msgstr ""

#: maint.c:1306
msgid "Commands for checking internal gdb state."
msgstr ""

#: maint.c:1313
msgid "Translate a section name and address to a symbol."
msgstr ""

#: maint.c:1316
msgid ""
"Deprecate a command (for testing purposes).\n"
"Usage: maintenance deprecate COMMANDNAME [\"REPLACEMENT\"]\n"
"This is used by the testsuite to check the command deprecator.\n"
"You probably shouldn't use this,\n"
"rather you should use the C function deprecate_cmd()."
msgstr ""

#: maint.c:1323
msgid ""
"Undeprecate a command (for testing purposes).\n"
"Usage: maintenance undeprecate COMMANDNAME\n"
"This is used by the testsuite to check the command deprecator.\n"
"You probably shouldn't use this."
msgstr ""

#: maint.c:1330
msgid ""
"Run gdb's unit tests.\n"
"Usage: maintenance selftest [FILTER]\n"
"This will run any unit tests that were built in to gdb.\n"
"If a filter is given, only the tests with that value in their name will ran."
msgstr ""

#: maint.c:1338
msgid "List the registered selftests."
msgstr ""

#: maint.c:1341
msgid "Set internal profiling."
msgstr ""

#: maint.c:1342
msgid "Show internal profiling."
msgstr ""

#: maint.c:1343
msgid "When enabled GDB is profiled."
msgstr ""

#: maint.c:1352
msgid "Set the number of worker threads GDB can use."
msgstr ""

#: maint.c:1353
msgid "Show the number of worker threads GDB can use."
msgstr ""

#: maint.c:1354
msgid ""
"GDB may use multiple threads to speed up certain CPU-intensive operations,\n"
"such as demangling symbol names."
msgstr ""

#: mdebugread.c:130
#, possible-c-format
msgid "bad aux index at symbol %s"
msgstr ""

#: mdebugread.c:136
#, possible-c-format
msgid "unknown external symbol %s"
msgstr ""

#: mdebugread.c:142
#, possible-c-format
msgid "cannot map ECOFF basic type 0x%x for %s"
msgstr ""

#: mdebugread.c:149
#, possible-c-format
msgid "guessed tag type of %s incorrectly"
msgstr ""

#: mdebugread.c:155
#, possible-c-format
msgid "bad rfd entry for %s: file %d, index %d"
msgstr ""

#: mdebugread.c:162
#, possible-c-format
msgid "unexpected type code for %s"
msgstr ""

#: mdebugread.c:377
#, possible-c-format
msgid ""
"\n"
"%s not compiled with -g, debugging support is limited.\n"
msgstr ""

#: mdebugread.c:380
msgid "You should compile with -g2 or -g3 for best debugging support.\n"
msgstr ""

#: mdebugread.c:523 stabsread.c:184
#, possible-c-format
msgid "bad register number %d (max %d) in symbol %s"
msgstr ""

#: mdebugread.c:743 mdebugread.c:1353
#, possible-c-format
msgid "unknown symbol type 0x%x"
msgstr ""

#: mdebugread.c:960
#, possible-c-format
msgid "declaration block contains unhandled symbol type %d"
msgstr ""

#: mdebugread.c:1238
#, possible-c-format
msgid "stEnd with storage class %d not handled"
msgstr ""

#: mdebugread.c:1595
#, possible-c-format
msgid "can't handle TIR fBitfield for %s"
msgstr ""

#: mdebugread.c:1624
#, possible-c-format
msgid "unable to cross ref btIndirect for %s"
msgstr ""

#: mdebugread.c:1739
#, possible-c-format
msgid "unable to cross ref btTypedef for %s"
msgstr ""

#: mdebugread.c:1785
#, possible-c-format
msgid "illegal TIR continued for %s"
msgstr ""

#: mdebugread.c:1847
#, possible-c-format
msgid "illegal array index type for %s, assuming int"
msgstr ""

#: mdebugread.c:1894
#, possible-c-format
msgid "unknown type qualifier 0x%x"
msgstr ""

#. Static procedure at address pr->adr.  Sigh.
#. FIXME-32x64.  assuming pr->adr fits in long.
#: mdebugread.c:1926
#, possible-c-format
msgid "can't handle PDR for static proc at 0x%lx"
msgstr ""

#: mdebugread.c:1989
#, possible-c-format
msgid "PDR for %s, but no symbol"
msgstr ""

#: mdebugread.c:2114
#, possible-c-format
msgid "Warning: %s `%s' is undefined (in %s)\n"
msgstr ""

#: mdebugread.c:2212
#, possible-c-format
msgid "guessed size of linetable for %s incorrectly"
msgstr ""

#: mdebugread.c:2466
#, possible-c-format
msgid "bad ifd for external symbol: %d (max %ld)"
msgstr ""

#: mdebugread.c:2472
#, possible-c-format
msgid "bad iss for external symbol: %ld (max %ld)"
msgstr ""

#. This should not happen either... FIXME.
#: mdebugread.c:3435
#, possible-c-format
msgid "bad proc end in aux found from symbol %s"
msgstr ""

#. This happens with the Ultrix kernel.
#: mdebugread.c:3547
#, possible-c-format
msgid "bad aux index at block symbol %s"
msgstr ""

#. Both complaints are valid:  one gives symbol sym_name,
#. the other the offending symbol type.
#: mdebugread.c:3568
#, possible-c-format
msgid "unknown local symbol %s"
msgstr ""

#: mdebugread.c:3570
#, possible-c-format
msgid "with type %d"
msgstr ""

#: mdebugread.c:3731
#, possible-c-format
msgid "bad file number %ld"
msgstr ""

#: mdebugread.c:4042
#, possible-c-format
msgid "unknown stabs symbol %s"
msgstr ""

#: mdebugread.c:4225
#, possible-c-format
msgid "File %s contains %d unresolved references:"
msgstr ""

#: mdebugread.c:4401
#, possible-c-format
msgid "illegal tq0 in forward typedef for %s"
msgstr ""

#: mdebugread.c:4437
#, possible-c-format
msgid "illegal bt %d in forward typedef for %s"
msgstr ""

#: mdebugread.c:4804
#, possible-c-format
msgid "Error reading ECOFF debugging information: %s"
msgstr ""

#: memattr.c:63
msgid "Unknown memory addresses will be treated as inaccessible.\n"
msgstr ""

#: memattr.c:66
msgid "Unknown memory addresses will be treated as RAM.\n"
msgstr ""

#: memattr.c:92
msgid ""
"Switching to manual control of memory regions; use \"mem auto\" to fetch "
"regions from the target again."
msgstr ""

#: memattr.c:124
msgid "invalid memory region: low >= high\n"
msgstr ""

#: memattr.c:151
msgid "overlapping memory region\n"
msgstr ""

#: memattr.c:254
msgid "No mem"
msgstr ""

#: memattr.c:272
msgid "no lo address"
msgstr ""

#: memattr.c:277
msgid "no hi address"
msgstr ""

#: memattr.c:295
msgid "region bounds not 16 bit aligned"
msgstr ""

#: memattr.c:301
msgid "region bounds not 32 bit aligned"
msgstr ""

#: memattr.c:307
msgid "region bounds not 64 bit aligned"
msgstr ""

#: memattr.c:331
#, possible-c-format
msgid "unknown attribute: %s"
msgstr ""

#: memattr.c:342
msgid "Using memory regions provided by the target.\n"
msgstr ""

#: memattr.c:344
msgid "Using user-defined memory regions.\n"
msgstr ""

#: memattr.c:350
msgid "There are no memory regions defined.\n"
msgstr ""

#: memattr.c:477 memattr.c:515 memattr.c:548 memattr.c:561
#, possible-c-format
msgid "No memory region number %d.\n"
msgstr ""

#: memattr.c:573
msgid "Delete all memory regions? "
msgstr ""

#: memattr.c:600
msgid ""
"Define attributes for memory region or reset memory region handling to "
"target-based.\n"
"Usage: mem auto\n"
"       mem LOW HIGH [MODE WIDTH CACHE],\n"
"where MODE  may be rw (read/write), ro (read-only) or wo (write-only),\n"
"      WIDTH may be 8, 16, 32, or 64, and\n"
"      CACHE may be cache or nocache"
msgstr ""

#: memattr.c:609
msgid ""
"Enable memory region.\n"
"Arguments are the IDs of the memory regions to enable.\n"
"Usage: enable mem [ID]...\n"
"Do \"info mem\" to see current list of IDs."
msgstr ""

#: memattr.c:615
msgid ""
"Disable memory region.\n"
"Arguments are the IDs of the memory regions to disable.\n"
"Usage: disable mem [ID]...\n"
"Do \"info mem\" to see current list of IDs."
msgstr ""

#: memattr.c:621
msgid ""
"Delete memory region.\n"
"Arguments are the IDs of the memory regions to delete.\n"
"Usage: delete mem [ID]...\n"
"Do \"info mem\" to see current list of IDs."
msgstr ""

#: memattr.c:628
msgid "Memory region attributes."
msgstr ""

#. allow-unknown
#: memattr.c:630 memattr.c:634
msgid "Memory regions settings."
msgstr ""

#: memattr.c:640
msgid "Set handling of unknown memory regions."
msgstr ""

#: memattr.c:641
msgid "Show handling of unknown memory regions."
msgstr ""

#: memattr.c:642
msgid ""
"If on, and some memory map is defined, debugger will emit errors on\n"
"accesses to memory not defined in the memory map. If off, accesses to all\n"
"memory addresses will be allowed."
msgstr ""

#: memory-map.c:33
msgid "Can not parse XML memory map; XML support was disabled at compile time"
msgstr ""

#: memory-map.c:92
msgid "Flash block size is not set"
msgstr ""

#: memory-map.c:129
#, possible-c-format
msgid "Unknown property \"%s\""
msgstr ""

#: memory-map.c:179
msgid "target memory map"
msgstr ""

#. Return values larger than a single register are returned in
#. memory, pointed to by R0.  Unfortunately, we can't count on R0
#. pointing to the return buffer, so we raise an error here.
#: mep-tdep.c:2132 mep-tdep.c:2159
msgid ""
"GDB cannot set return values larger than four bytes; the Media Processor's\n"
"calling conventions do not provide enough information to do this.\n"
"Try using the 'return' command with no argument."
msgstr ""

#: mep-tdep.c:2367
#, possible-c-format
msgid ""
"the MeP module '%s' is %s-endian, but the executable\n"
"%s is %s-endian."
msgstr ""

#: mep-tdep.c:2372
#, possible-c-format
msgid ""
"the selected MeP module is %s-endian, but the executable\n"
"%s is %s-endian."
msgstr ""

#: mi/mi-cmd-env.c:66
msgid "-environment-pwd: No arguments allowed"
msgstr ""

#: mi/mi-cmd-env.c:78
#, possible-c-format
msgid "-environment-pwd: error finding name of working directory: %s"
msgstr ""

#: mi/mi-cmd-env.c:90
msgid "-environment-cd: Usage DIRECTORY"
msgstr ""

#: mi/mi-cmd-env.c:258
msgid "-inferior-tty-show: Usage: No args"
msgstr ""

#: mi/mi-cmd-break.c:270
#, possible-c-format
msgid "-%s-insert: Missing <location>"
msgstr ""

#: mi/mi-cmd-break.c:277
msgid "-dprintf-insert: does not support -h or -a"
msgstr ""

#: mi/mi-cmd-break.c:279
msgid "-dprintf-insert: Missing <format>"
msgstr ""

#: mi/mi-cmd-break.c:289
msgid "-break-insert: Garbage following explicit location"
msgstr ""

#: mi/mi-cmd-break.c:294
msgid "-break-insert: Garbage following <location>"
msgstr ""

#: mi/mi-cmd-break.c:333
#, possible-c-format
msgid "-%s-insert: --source option requires --function, --label, or --line"
msgstr ""

#: mi/mi-cmd-break.c:388
msgid "Usage: tracepoint-number passcount"
msgstr ""

#: mi/mi-cmd-break.c:401
#, possible-c-format
msgid "Could not find tracepoint %d"
msgstr ""

#: mi/mi-cmd-break.c:449
msgid "-break-watch: Missing <expression>"
msgstr ""

#: mi/mi-cmd-break.c:451
msgid "-break-watch: Garbage following <expression>"
msgstr ""

#: mi/mi-cmd-break.c:467
msgid "-break-watch: Unknown watchpoint type."
msgstr ""

#: mi/mi-cmd-break.c:480
#, possible-c-format
msgid "USAGE: %s <BKPT> [<COMMAND> [<COMMAND>...]]"
msgstr ""

#: mi/mi-cmd-break.c:484
#, possible-c-format
msgid "breakpoint number argument \"%s\" is not a number."
msgstr ""

#: mi/mi-cmd-break.c:487
#, possible-c-format
msgid "junk at the end of breakpoint number argument \"%s\"."
msgstr ""

#: mi/mi-cmd-break.c:492
#, possible-c-format
msgid "breakpoint %d not found."
msgstr ""

#: mi/mi-cmds.c:279
#, possible-c-format
msgid "command `%s' appears to be duplicated"
msgstr ""

#: mi/mi-symbol-cmds.c:41
msgid "-symbol-list-lines: Usage: SOURCE_FILENAME"
msgstr ""

#: mi/mi-symbol-cmds.c:47
msgid "-symbol-list-lines: Unknown source file name."
msgstr ""

#: mi/mi-symbol-cmds.c:180
msgid "invalid value for --max-results argument"
msgstr ""

#: mi/mi-cmd-stack.c:55
msgid "-enable-frame-filters: no arguments allowed"
msgstr ""

#: mi/mi-cmd-stack.c:122
msgid "-stack-list-frames: Usage: [--no-frame-filters] [FRAME_LOW FRAME_HIGH]"
msgstr ""

#: mi/mi-cmd-stack.c:146
msgid "-stack-list-frames: Not enough frames in stack."
msgstr ""

#: mi/mi-cmd-stack.c:193
msgid "-stack-info-depth: Usage: [MAX_DEPTH]"
msgstr ""

#: mi/mi-cmd-stack.c:262
msgid ""
"-stack-list-locals: Usage: [--no-frame-filters] [--skip-unavailable] "
"PRINT_VALUES"
msgstr ""

#: mi/mi-cmd-stack.c:335
msgid ""
"-stack-list-arguments: Usage: [--no-frame-filters] [--skip-unavailable] "
"PRINT_VALUES [FRAME_LOW FRAME_HIGH]"
msgstr ""

#: mi/mi-cmd-stack.c:362
msgid "-stack-list-arguments: Not enough frames in stack."
msgstr ""

#: mi/mi-cmd-stack.c:453
msgid ""
"-stack-list-variables: Usage: [--no-frame-filters] [--skip-unavailable] "
"PRINT_VALUES"
msgstr ""

#: mi/mi-cmd-stack.c:758
msgid "-stack-select-frame: Usage: FRAME_SPEC"
msgstr ""

#: mi/mi-cmd-stack.c:767
msgid "-stack-info-frame: No arguments allowed"
msgstr ""

#: mi/mi-cmd-file.c:43
msgid "-file-list-exec-source-file: Usage: No args"
msgstr ""

#: mi/mi-cmd-file.c:53
msgid "-file-list-exec-source-file: No symtab"
msgstr ""

#: mi/mi-cmd-file.c:89
msgid "-file-list-exec-source-files: Usage: No args"
msgstr ""

#: mi/mi-cmd-file.c:135
msgid "Usage: -file-list-shared-libraries [REGEXP]"
msgstr ""

#: mi/mi-cmd-info.c:43
msgid "Usage: -info-ada-exceptions [REGEXP]"
msgstr ""

#: mi/mi-cmd-info.c:75
msgid "Usage: -info-gdb-mi-command MI_COMMAND_NAME"
msgstr ""

#: mi/mi-cmd-info.c:103
msgid "Usage: -info-os [INFOTYPE]"
msgstr ""

#: mi/mi-cmd-target.c:40
msgid "-target-file-get: Usage: REMOTE_FILE LOCAL_FILE"
msgstr ""

#: mi/mi-cmd-target.c:64
msgid "-target-file-put: Usage: LOCAL_FILE REMOTE_FILE"
msgstr ""

#: mi/mi-cmd-target.c:88
msgid "-target-file-delete: Usage: REMOTE_FILE"
msgstr ""

#: mi/mi-cmd-catch.c:79 mi/mi-cmd-catch.c:147 mi/mi-cmd-catch.c:215
#: mi/mi-main.c:463 skip.c:299
#, possible-c-format
msgid "Invalid argument: %s"
msgstr ""

#: mi/mi-cmd-catch.c:152
msgid "\"-e\" and \"-u\" are mutually exclusive"
msgstr ""

#: mi/mi-cmd-catch.c:266
msgid "-catch-load/unload: Missing <library name>"
msgstr ""

#: mi/mi-cmd-catch.c:268
msgid "-catch-load/unload: Garbage following the <library name>"
msgstr ""

#: mi/mi-interp.c:197
msgid "-interpreter-exec: Usage: -interpreter-exec interp command"
msgstr ""

#: mi/mi-interp.c:202
#, possible-c-format
msgid "-interpreter-exec: could not find interpreter \"%s\""
msgstr ""

#: mi/mi-cmd-var.c:102
msgid "-var-create: Usage: NAME FRAME EXPRESSION."
msgstr ""

#: mi/mi-cmd-var.c:115
msgid "-var-create: name of object must begin with a letter"
msgstr ""

#: mi/mi-cmd-var.c:135
msgid "-var-create: unable to create variable object"
msgstr ""

#: mi/mi-cmd-var.c:152
msgid "-var-delete: Usage: [-c] EXPRESSION."
msgstr ""

#: mi/mi-cmd-var.c:161
msgid "-var-delete: Missing required argument after '-c': variable object name"
msgstr ""

#: mi/mi-cmd-var.c:164
msgid "-var-delete: Illegal variable object name"
msgstr ""

#: mi/mi-cmd-var.c:172
msgid "-var-delete: Invalid option."
msgstr ""

#: mi/mi-cmd-var.c:212
msgid ""
"Must specify the format as: \"natural\", \"binary\", \"decimal\", "
"\"hexadecimal\", \"octal\" or \"zero-hexadecimal\""
msgstr ""

#: mi/mi-cmd-var.c:224
msgid "-var-set-format: Usage: NAME FORMAT."
msgstr ""

#: mi/mi-cmd-var.c:248
msgid "Usage: NAME VISUALIZER_FUNCTION."
msgstr ""

#: mi/mi-cmd-var.c:253 varobj.c:450
msgid "Variable object not found"
msgstr ""

#: mi/mi-cmd-var.c:265
msgid "-var-set-format: Usage: NAME FROZEN_FLAG."
msgstr ""

#: mi/mi-cmd-var.c:274
msgid "Invalid flag value"
msgstr ""

#: mi/mi-cmd-var.c:291
msgid "-var-show-format: Usage: NAME."
msgstr ""

#: mi/mi-cmd-var.c:309
msgid "-var-info-num-children: Usage: NAME."
msgstr ""

#: mi/mi-cmd-var.c:358
msgid "-var-list-children: Usage: [PRINT_VALUES] NAME [FROM TO]"
msgstr ""

#: mi/mi-cmd-var.c:420
msgid "-var-info-type: Usage: NAME."
msgstr ""

#: mi/mi-cmd-var.c:436
msgid "Usage: NAME."
msgstr ""

#: mi/mi-cmd-var.c:454
msgid "-var-info-expression: Usage: NAME."
msgstr ""

#: mi/mi-cmd-var.c:476
msgid "-var-show-attributes: Usage: NAME."
msgstr ""

#: mi/mi-cmd-var.c:527
msgid "Cannot specify format more than once"
msgstr ""

#: mi/mi-cmd-var.c:536
msgid "Usage: [-f FORMAT] NAME"
msgstr ""

#: mi/mi-cmd-var.c:539
msgid "Garbage at end of command"
msgstr ""

#: mi/mi-cmd-var.c:565
msgid "-var-assign: Usage: NAME EXPRESSION."
msgstr ""

#: mi/mi-cmd-var.c:571
msgid "-var-assign: Variable object is not editable"
msgstr ""

#: mi/mi-cmd-var.c:581
msgid "-var-assign: Could not assign expression to variable object"
msgstr ""

#: mi/mi-cmd-var.c:632
msgid "-var-update: Usage: [PRINT_VALUES] NAME."
msgstr ""

#: mi/mi-cmd-var.c:764
msgid "-enable-pretty-printing: no arguments allowed"
msgstr ""

#: mi/mi-cmd-var.c:776
msgid "-var-set-update-range: Usage: VAROBJ FROM TO"
msgstr ""

#: mi/mi-main.c:128
#, possible-c-format
msgid "Whether MI is in asynchronous mode is %s.\n"
msgstr ""

#: mi/mi-main.c:322
msgid "Already in reverse mode."
msgstr ""

#: mi/mi-main.c:325 reverse.c:48
#, possible-c-format
msgid "Target %s does not support this command."
msgstr ""

#: mi/mi-main.c:498
msgid "Usage: -target-detach [pid | thread-group]"
msgstr ""

#: mi/mi-main.c:513
#, possible-c-format
msgid "Invalid syntax of thread-group id '%s'"
msgstr ""

#: mi/mi-main.c:517
#, possible-c-format
msgid "Non-existent thread-group id '%d'"
msgstr ""

#: mi/mi-main.c:527
#, possible-c-format
msgid "Invalid identifier '%s'"
msgstr ""

#: mi/mi-main.c:534
msgid "Thread group is empty"
msgstr ""

#: mi/mi-main.c:552
msgid "-thread-select: USAGE: threadnum."
msgstr ""

#: mi/mi-main.c:557
#, possible-c-format
msgid "Thread ID %d not known."
msgstr ""

#: mi/mi-main.c:578
msgid "-thread-list-ids: No arguments required."
msgstr ""

#: mi/mi-main.c:607 mi/mi-main.c:2452
msgid "Invalid MI command"
msgstr ""

#: mi/mi-main.c:822
msgid "only '0' and '1' are valid values for the '--recurse' option"
msgstr ""

#: mi/mi-main.c:834 mi/mi-main.c:839
#, possible-c-format
msgid "invalid syntax of group id '%s'"
msgstr ""

#: mi/mi-main.c:854
#, possible-c-format
msgid "Non-existent thread group id '%d'"
msgstr ""

#: mi/mi-main.c:914 mi/mi-main.c:986 mi/mi-main.c:1107 mi/mi-main.c:1198
msgid "bad register number"
msgstr ""

#: mi/mi-main.c:1069
msgid ""
"-data-list-register-values: Usage: -data-list-register-values [--skip-"
"unavailable] <format> [<regnum1>...<regnumN>]"
msgstr ""

#: mi/mi-main.c:1168
msgid ""
"-data-write-register-values: Usage: -data-write-register-values <format> "
"[<regnum1> <value1>...<regnumN> <valueN>]"
msgstr ""

#: mi/mi-main.c:1172
msgid "-data-write-register-values: No registers."
msgstr ""

#: mi/mi-main.c:1175
msgid "-data-write-register-values: No regs and values specified."
msgstr ""

#: mi/mi-main.c:1178
msgid "-data-write-register-values: Regs and vals are not in pairs."
msgstr ""

#: mi/mi-main.c:1214
msgid "-data-evaluate-expression: Usage: -data-evaluate-expression expression"
msgstr ""

#: mi/mi-main.c:1294
msgid ""
"-data-read-memory: Usage: ADDR WORD-FORMAT WORD-SIZE NR-ROWS NR-COLS "
"[ASCHAR]."
msgstr ""

#: mi/mi-main.c:1331
msgid "-data-read-memory: invalid number of rows."
msgstr ""

#: mi/mi-main.c:1336
msgid "-data-read-memory: invalid number of columns."
msgstr ""

#: mi/mi-main.c:1352 mi/mi-main.c:1472
msgid "Unable to read memory."
msgstr ""

#: mi/mi-main.c:1463
msgid "Usage: [ -o OFFSET ] ADDR LENGTH."
msgstr ""

#: mi/mi-main.c:1548
msgid ""
"-data-write-memory: Usage: [-o COLUMN_OFFSET] ADDR FORMAT WORD-SIZE VALUE."
msgstr ""

#: mi/mi-main.c:1585
msgid "Usage: ADDR DATA [COUNT]."
msgstr ""

#: mi/mi-main.c:1593
#, possible-c-format
msgid ""
"Hex-encoded '%s' must represent an integral number of addressable memory "
"units."
msgstr ""

#: mi/mi-main.c:1663
#, possible-c-format
msgid "-enable-timings: Usage: %s {yes|no}"
msgstr ""

#: mi/mi-main.c:1692
msgid "-list-features should be passed no arguments"
msgstr ""

#: mi/mi-main.c:1710
msgid "-list-target-features should be passed no arguments"
msgstr ""

#: mi/mi-main.c:1719
msgid "-add-inferior should be passed no arguments"
msgstr ""

#: mi/mi-main.c:1745
msgid "-remove-inferior should be passed a single argument"
msgstr ""

#: mi/mi-main.c:1748
msgid "the thread group id is syntactically invalid"
msgstr ""

#: mi/mi-main.c:1752
msgid "the specified thread group does not exist"
msgstr ""

#: mi/mi-main.c:1755
msgid "cannot remove an active inferior"
msgstr ""

#: mi/mi-main.c:1764
msgid "Cannot remove last inferior"
msgstr ""

#: mi/mi-main.c:2029
msgid "Cannot specify --thread-group together with --all"
msgstr ""

#: mi/mi-main.c:2032
msgid "Cannot specify --thread together with --all"
msgstr ""

#: mi/mi-main.c:2035
msgid "Cannot specify --thread together with --thread-group"
msgstr ""

#: mi/mi-main.c:2038
msgid "Cannot specify --frame without --thread"
msgstr ""

#: mi/mi-main.c:2046
msgid "Invalid thread group for the --thread-group option"
msgstr ""

#: mi/mi-main.c:2068
#, possible-c-format
msgid "Invalid thread id: %d"
msgstr ""

#: mi/mi-main.c:2071
#, possible-c-format
msgid "Thread id: %d has terminated"
msgstr ""

#: mi/mi-main.c:2086
#, possible-c-format
msgid "Invalid frame id: %d"
msgstr ""

#: mi/mi-main.c:2274
msgid "Usage: -trace-define-variable VARIABLE [VALUE]"
msgstr ""

#: mi/mi-main.c:2278 tracepoint.c:343
msgid "Name of trace variable should start with '$'"
msgstr ""

#: mi/mi-main.c:2296
msgid "-trace-list-variables: no arguments allowed"
msgstr ""

#: mi/mi-main.c:2307
msgid "trace selection mode is required"
msgstr ""

#: mi/mi-main.c:2322
msgid "frame number is required"
msgstr ""

#: mi/mi-main.c:2328
msgid "tracepoint number is required"
msgstr ""

#: mi/mi-main.c:2334
msgid "PC is required"
msgstr ""

#: mi/mi-main.c:2340 mi/mi-main.c:2347
msgid "Start and end PC are required"
msgstr ""

#: mi/mi-main.c:2354
msgid "Line is required"
msgstr ""

#: mi/mi-main.c:2362 mi/mi-main.c:2368
msgid "Could not find the specified line"
msgstr ""

#: mi/mi-main.c:2371
#, possible-c-format
msgid "Invalid mode '%s'"
msgstr ""

#: mi/mi-main.c:2416
msgid "Exactly one argument required (file in which to save trace data)"
msgstr ""

#: mi/mi-main.c:2568
msgid ""
"Usage: -trace-frame-collected [--var-print-values PRINT_VALUES] [--comp-"
"print-values PRINT_VALUES] [--registers-format FORMAT][--memory-contents]"
msgstr ""

#: mi/mi-main.c:2717
msgid "Usage: -complete COMMAND"
msgstr ""

#: mi/mi-main.c:2720
msgid "max-completions is zero, completion is disabled."
msgstr ""

#: mi/mi-main.c:2762
msgid "Set whether MI asynchronous mode is enabled."
msgstr ""

#: mi/mi-main.c:2763
msgid "Show whether MI asynchronous mode is enabled."
msgstr ""

#: mi/mi-main.c:2764
msgid "Tells GDB whether MI should be in asynchronous mode."
msgstr ""

#: mi/mi-cmd-disas.c:150
msgid ""
"-data-disassemble: Usage: ( [-f filename -l linenum [-n howmany]] | [-s "
"startaddr -e endaddr] | [-a addr] ) [--] mode."
msgstr ""

#: mi/mi-cmd-disas.c:155
msgid "-data-disassemble: Mode argument must be in the range 0-5."
msgstr ""

#: mi/mi-cmd-disas.c:190
msgid "-data-disassemble: Invalid filename."
msgstr ""

#: mi/mi-cmd-disas.c:192
msgid "-data-disassemble: Invalid line number"
msgstr ""

#: mi/mi-cmd-disas.c:194 mi/mi-cmd-disas.c:200
msgid "-data-disassemble: No function contains specified address"
msgstr ""

#: mi/mi-parse.c:278
#, possible-c-format
msgid "Undefined MI command: %s"
msgstr ""

#: mi/mi-parse.c:317
msgid "Duplicate '--thread-group' option"
msgstr ""

#: mi/mi-parse.c:320
msgid "Invalid thread group id"
msgstr ""

#: mi/mi-parse.c:331
msgid "Duplicate '--thread' option"
msgstr ""

#: mi/mi-parse.c:342
msgid "Duplicate '--frame' option"
msgstr ""

#: mi/mi-parse.c:356
#, possible-c-format
msgid "Invalid --language argument: %s"
msgstr ""

#: mi/mi-parse.c:362
#, possible-c-format
msgid "Invalid value for the '%s' option"
msgstr ""

#: mi/mi-parse.c:372
#, possible-c-format
msgid "Problem parsing arguments: %s %s"
msgstr ""

#: mi/mi-parse.c:399
#, possible-c-format
msgid ""
"Unknown value for PRINT_VALUES: must be: 0 or \"%s\", 1 or \"%s\", 2 or \"%s"
"\""
msgstr ""

#: mi/mi-getopt.c:37
msgid "mi_getopt_long: oind out of bounds"
msgstr ""

#: mi/mi-getopt.c:63
#, possible-c-format
msgid "%s: Option %s requires an argument"
msgstr ""

#: mi/mi-getopt.c:77
#, possible-c-format
msgid "%s: Unknown option ``%s''"
msgstr ""

#: microblaze-tdep.c:548
msgid "Unsupported return value size requested"
msgstr ""

#: microblaze-tdep.c:765
msgid "Set microblaze debugging."
msgstr ""

#: microblaze-tdep.c:766
msgid "Show microblaze debugging."
msgstr ""

#: microblaze-tdep.c:767
msgid "When non-zero, microblaze specific debugging is enabled."
msgstr ""

#: minidebug.c:272
#, possible-c-format
msgid ".gnu_debugdata for %s"
msgstr ""

#: minidebug.c:282
msgid "Cannot parse .gnu_debugdata section; not a BFD object"
msgstr ""

#: minidebug.c:286
msgid ""
"Cannot parse .gnu_debugdata section; LZMA support was disabled at compile "
"time"
msgstr ""

#: minsyms.c:939
#, possible-c-format
msgid ""
"GDB cannot resolve STT_GNU_IFUNC symbol at address %s without the ELF "
"support compiled in."
msgstr ""

#: minsyms.c:950
#, possible-c-format
msgid ""
"GDB cannot resolve STT_GNU_IFUNC symbol \"%s\" without the ELF support "
"compiled in."
msgstr ""

#: minsyms.c:961
msgid "elf_gnu_ifunc_resolver_stop cannot be reached."
msgstr ""

#: minsyms.c:970
msgid "elf_gnu_ifunc_resolver_return_stop cannot be reached."
msgstr ""

#: mips-linux-nat.c:105 mips-linux-nat.c:146
#, possible-c-format
msgid "Bogon register number %d."
msgstr ""

#: mips-linux-nat.c:305 mips-linux-nat.c:381 ppc-fbsd-nat.c:143
#: ppc-fbsd-nat.c:171 ppc-nbsd-nat.c:109 ppc-nbsd-nat.c:141
msgid "Couldn't get FP registers"
msgstr ""

#: mips-linux-nat.c:372 riscv-linux-nat.c:279 riscv-linux-nat.c:303
#: sh-nbsd-nat.c:92
msgid "Couldn't set registers"
msgstr ""

#: mips-linux-nat.c:387 ppc-fbsd-nat.c:176 ppc-nbsd-nat.c:147
msgid "Couldn't set FP registers"
msgstr ""

#: mips-linux-nat.c:474
msgid "Couldn't check DSP support"
msgstr ""

#: mips-linux-nat.c:642 mips-linux-nat.c:661 nat/x86-linux-dregs.c:70
msgid "Couldn't write debug register"
msgstr ""

#: mips-linux-nat.c:790
msgid "Set whether to show variables that mirror the mips debug registers."
msgstr ""

#: mips-linux-nat.c:791
msgid "Show whether to show variables that mirror the mips debug registers."
msgstr ""

#: mips-tdep.c:673
#, possible-c-format
msgid "mips_register_name: bad register number %d"
msgstr ""

#: mips-tdep.c:774 mips-tdep.c:803 mips-tdep.c:843
msgid "bad register size"
msgstr ""

#: mips-tdep.c:875
msgid "32-bit compatibility mode not supported"
msgstr ""

#: mips-tdep.c:955
msgid "mips_register_to_value: unrecognized case"
msgstr ""

#: mips-tdep.c:1003
msgid "mips_value_to_register: unrecognized case"
msgstr ""

#: mips-tdep.c:1149
msgid "mips_mask_address_p: bad switch"
msgstr ""

#: mips-tdep.c:1175
msgid "show_mask_address: bad switch"
msgstr ""

#: mips-tdep.c:1459 mips-tdep.c:1543
msgid "invalid ISA"
msgstr ""

#: mips-tdep.c:2735
msgid "Invalid number of argument registers encoded in SAVE."
msgstr ""

#: mips-tdep.c:2740
msgid "Invalid number of static registers encoded in SAVE."
msgstr ""

#: mips-tdep.c:4254
#, possible-c-format
msgid "GDB can't find the start of the function at %s."
msgstr ""

#: mips-tdep.c:6219 mips-tdep.c:6256
#, possible-c-format
msgid "can't read register %d (%s)"
msgstr ""

#: mips-tdep.c:6265
msgid "mips_read_fp_register_double: bad access to odd-numbered FP register"
msgstr ""

#: mips-tdep.c:6596 riscv-tdep.c:959
msgid "Not a valid register for the current processor type"
msgstr ""

#: mips-tdep.c:6958 mips-tdep.c:6972 mips-tdep.c:6986
msgid "set mipsfpu failed"
msgstr ""

#: mips-tdep.c:7999
#, possible-c-format
msgid "unsupported ABI %s."
msgstr ""

#: mips-tdep.c:8013
msgid "unrecognized .gcc_compiled_longXX"
msgstr ""

#: mips-tdep.c:8025
msgid "unknown ABI string"
msgstr ""

#: mips-tdep.c:8042
msgid "unknown compressed ISA string"
msgstr ""

#: mips-tdep.c:8606 mips-tdep.c:8655
msgid "unknown ABI in switch"
msgstr ""

#: mips-tdep.c:8893
#, possible-c-format
msgid "The compressed ISA encoding used is %s.\n"
msgstr ""

#: mips-tdep.c:8982
msgid "mips_abi_strings out of sync"
msgstr ""

#: mips-tdep.c:8996 mips-tdep.c:9000
msgid "Various MIPS specific commands."
msgstr ""

#: mips-tdep.c:9005
msgid "Set the MIPS ABI used by this program."
msgstr ""

#: mips-tdep.c:9006
msgid "Show the MIPS ABI used by this program."
msgstr ""

#: mips-tdep.c:9007
msgid ""
"This option can be set to one of:\n"
"  auto  - the default ABI associated with the current binary\n"
"  o32\n"
"  o64\n"
"  n32\n"
"  n64\n"
"  eabi32\n"
"  eabi64"
msgstr ""

#: mips-tdep.c:9025
msgid "Set the compressed ISA encoding used by MIPS code."
msgstr ""

#: mips-tdep.c:9026
msgid "Show the compressed ISA encoding used by MIPS code."
msgstr ""

#: mips-tdep.c:9027
msgid ""
"Select the compressed ISA encoding used in functions that have no symbol\n"
"information available.  The encoding can be set to either of:\n"
"  mips16\n"
"  micromips\n"
"and is updated automatically from ELF file flags if available."
msgstr ""

#: mips-tdep.c:9041
msgid "Set use of MIPS floating-point coprocessor."
msgstr ""

#: mips-tdep.c:9044
msgid "Select single-precision MIPS floating-point coprocessor."
msgstr ""

#: mips-tdep.c:9047
msgid "Select double-precision MIPS floating-point coprocessor."
msgstr ""

#: mips-tdep.c:9053
msgid "Select no MIPS floating-point coprocessor."
msgstr ""

#: mips-tdep.c:9058
msgid "Select MIPS floating-point coprocessor automatically."
msgstr ""

#: mips-tdep.c:9061
msgid "Show current use of MIPS floating-point coprocessor target."
msgstr ""

#: mips-tdep.c:9082
msgid "Set zeroing of upper 32 bits of 64-bit addresses."
msgstr ""

#: mips-tdep.c:9083
msgid "Show zeroing of upper 32 bits of 64-bit addresses."
msgstr ""

#: mips-tdep.c:9084
msgid ""
"Use \"on\" to enable the masking, \"off\" to disable it and \"auto\" to\n"
"allow GDB to determine the correct value."
msgstr ""

#: mips-tdep.c:9093
msgid ""
"Set compatibility with 64-bit MIPS target that transfers 32-bit quantities."
msgstr ""

#: mips-tdep.c:9095
msgid ""
"Show compatibility with 64-bit MIPS target that transfers 32-bit quantities."
msgstr ""

#: mips-tdep.c:9097
msgid ""
"Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n"
"that would transfer 32 bits for some registers (e.g. SR, FSR) and\n"
"64 bits for others.  Use \"off\" to disable compatibility mode"
msgstr ""

#: mips-tdep.c:9109
msgid "Set mips debugging."
msgstr ""

#: mips-tdep.c:9110
msgid "Show mips debugging."
msgstr ""

#: mips-tdep.c:9111
msgid "When non-zero, mips specific debugging is enabled."
msgstr ""

#: mipsread.c:80
#, possible-c-format
msgid "Error reading symbol table: %s"
msgstr ""

#: mn10300-tdep.c:194
#, possible-c-format
msgid "Cannot store return value %d bytes long."
msgstr ""

#: mn10300-tdep.c:227
#, possible-c-format
msgid "Cannot extract return value %d bytes long."
msgstr ""

#: mn10300-tdep.c:1370
msgid "mn10300_gdbarch_init: Unknown mn10300 variant"
msgstr ""

#: moxie-tdep.c:282
#, possible-c-format
msgid "Process record: error reading memory at addr 0x%s len = %d.\n"
msgstr ""

#: msp430-tdep.c:863
msgid "Unknown msp430x code memory model"
msgstr ""

#: msp430-tdep.c:885
msgid "Unknown msp430 isa"
msgstr ""

#: nat/linux-ptrace.c:44
#, possible-c-format
msgid "process %d is already traced by process %d"
msgstr ""

#: nat/linux-ptrace.c:49
#, possible-c-format
msgid "process %d is a zombie - the process has already terminated"
msgstr ""

#: nat/linux-ptrace.c:92
#, possible-c-format
msgid "%s: failed to kill child pid %ld %s"
msgstr ""

#: nat/linux-ptrace.c:101
#, possible-c-format
msgid "%s: kill waitpid returned %ld: %s"
msgstr ""

#: nat/linux-ptrace.c:108
#, possible-c-format
msgid "%s: kill status %d is not WIFSIGNALED!"
msgstr ""

#: nat/linux-ptrace.c:135
#, possible-c-format
msgid "linux_ptrace_test_ret_to_nx: Cannot mmap: %s"
msgstr ""

#: nat/linux-ptrace.c:147
#, possible-c-format
msgid "linux_ptrace_test_ret_to_nx: Cannot fork: %s"
msgstr ""

#: nat/linux-ptrace.c:155
#, possible-c-format
msgid "linux_ptrace_test_ret_to_nx: Cannot PTRACE_TRACEME: %s"
msgstr ""

#: nat/linux-ptrace.c:185
#, possible-c-format
msgid "linux_ptrace_test_ret_to_nx: waitpid returned %ld: %s"
msgstr ""

#: nat/linux-ptrace.c:193
#, possible-c-format
msgid "linux_ptrace_test_ret_to_nx: WTERMSIG %d is not SIGKILL!"
msgstr ""

#: nat/linux-ptrace.c:196
msgid ""
"Cannot call inferior functions, Linux kernel PaX protection forbids return "
"to non-executable pages!"
msgstr ""

#: nat/linux-ptrace.c:203
#, possible-c-format
msgid "linux_ptrace_test_ret_to_nx: status %d is not WIFSTOPPED!"
msgstr ""

#: nat/linux-ptrace.c:212
#, possible-c-format
msgid ""
"linux_ptrace_test_ret_to_nx: WSTOPSIG %d is neither SIGTRAP nor SIGSEGV!"
msgstr ""

#: nat/linux-ptrace.c:222
#, possible-c-format
msgid "linux_ptrace_test_ret_to_nx: Cannot PTRACE_GETREGS: %s"
msgstr ""

#: nat/linux-ptrace.c:250
#, possible-c-format
msgid ""
"linux_ptrace_test_ret_to_nx: PC %p is neither near return address %p nor is "
"the return instruction %p!"
msgstr ""

#: nat/linux-ptrace.c:254
msgid ""
"Cannot call inferior functions on this system - Linux kernel with broken "
"i386 NX (non-executable pages) support detected!"
msgstr ""

#: nat/linux-ptrace.c:359
#, possible-c-format
msgid "linux_check_ptrace_features: waitpid: unexpected result %d."
msgstr ""

#: nat/linux-ptrace.c:362
#, possible-c-format
msgid "linux_check_ptrace_features: waitpid: unexpected status %d."
msgstr ""

#: nat/linux-ptrace.c:429
msgid "linux_test_for_tracefork: failed to resume child"
msgstr ""

#: nat/linux-ptrace.c:459
#, possible-c-format
msgid ""
"linux_test_for_tracefork: unexpected result from waitpid (%d, status 0x%x)"
msgstr ""

#: nat/linux-personality.c:49
#, possible-c-format
msgid "Error disabling address space randomization: %s"
msgstr ""

#: nat/linux-personality.c:65
#, possible-c-format
msgid "Error restoring address space randomization: %s"
msgstr ""

#: nat/x86-dregs.c:228
msgid "The i386 doesn't support data-read watchpoints.\n"
msgstr ""

#: nat/x86-dregs.c:240
#, possible-c-format
msgid "Invalid hardware breakpoint type %d in x86_length_and_rw_bits.\n"
msgstr ""

#: nat/x86-dregs.c:258
#, possible-c-format
msgid "Invalid hardware breakpoint length %d in x86_length_and_rw_bits.\n"
msgstr ""

#: nat/x86-dregs.c:428
#, possible-c-format
msgid "Invalid value %d of operation in x86_handle_nonaligned_watchpoint.\n"
msgstr ""

#: nat/aarch64-linux-hw-point.c:79
#, possible-c-format
msgid "Unexpected hardware watchpoint length register value 0x%x"
msgstr ""

#: nat/aarch64-linux-hw-point.c:113
msgid "Unrecognized breakpoint/watchpoint type"
msgstr ""

#: nat/aarch64-linux-hw-point.c:707
msgid "Unexpected error setting hardware debug registers"
msgstr ""

#: nat/aarch64-linux-hw-point.c:786
#, possible-c-format
msgid ""
"Unexpected number of hardware watchpoint registers reported by ptrace, got "
"%d, expected %d."
msgstr ""

#: nat/aarch64-linux-hw-point.c:794
msgid "Unable to determine the number of hardware watchpoints available."
msgstr ""

#: nat/aarch64-linux-hw-point.c:808
#, possible-c-format
msgid ""
"Unexpected number of hardware breakpoint registers reported by ptrace, got "
"%d, expected %d."
msgstr ""

#: nat/aarch64-linux-hw-point.c:816
msgid "Unable to determine the number of hardware breakpoints available."
msgstr ""

#: nat/linux-btrace.c:336
msgid "Branch trace may be incomplete."
msgstr ""

#: nat/linux-btrace.c:430
#, possible-c-format
msgid ""
"You do not have permission to record the process.  Try setting %s to 2 or "
"less."
msgstr ""

#: nat/linux-btrace.c:437
#, possible-c-format
msgid "Failed to start recording: %s"
msgstr ""

#: nat/linux-btrace.c:451
msgid "BTS support has been disabled for the target cpu."
msgstr ""

#: nat/linux-btrace.c:523 nat/linux-btrace.c:663
#, possible-c-format
msgid "Failed to map trace buffer: %s."
msgstr ""

#: nat/linux-btrace.c:541
msgid "Failed to determine trace buffer size."
msgstr ""

#: nat/linux-btrace.c:572
#, possible-c-format
msgid "Failed to read the PT event type from %s."
msgstr ""

#: nat/linux-btrace.c:613
#, possible-c-format
msgid "Failed to map trace user page: %s."
msgstr ""

#: nat/linux-btrace.c:694
msgid "Bad branch trace format."
msgstr ""

#: nat/linux-btrace.c:697
msgid "Unknown branch trace format."
msgstr ""

#: nat/linux-btrace.c:892
msgid "Unkown btrace read type."
msgstr ""

#: nat/linux-namespaces.c:740
msgid "mount namespace helper vanished?"
msgstr ""

#: nat/linux-namespaces.c:743
#, possible-c-format
msgid "unhandled error %d"
msgstr ""

#: nat/linux-namespaces.c:748
#, possible-c-format
msgid "mount namespace helper exited with status %d"
msgstr ""

#: nat/linux-namespaces.c:751
#, possible-c-format
msgid "mount namespace helper killed by signal %d"
msgstr ""

#: nat/linux-namespaces.c:755
#, possible-c-format
msgid "unhandled status %d"
msgstr ""

#: nat/linux-namespaces.c:759
#, possible-c-format
msgid "unknown pid %d"
msgstr ""

#: nat/x86-linux-dregs.c:52
msgid "Couldn't read debug register"
msgstr ""

#: nat/fork-inferior.c:511
#, possible-c-format
msgid "During startup program terminated with signal %s, %s."
msgstr ""

#: nat/fork-inferior.c:520
#, possible-c-format
msgid "During startup program exited with code %d."
msgstr ""

#: nat/fork-inferior.c:523
msgid "During startup program exited normally."
msgstr ""

#: nat/aarch64-sve-linux-ptrace.c:55
msgid "Invalid SVE state from kernel; SVE disabled."
msgstr ""

#: nat/aarch64-sve-linux-ptrace.c:113
msgid "Unable to fetch SVE register header"
msgstr ""

#: nat/aarch64-sve-linux-ptrace.c:125
msgid "Unable to fetch SVE registers"
msgstr ""

#: nat/aarch64-sve-linux-ptrace.c:145 nat/aarch64-sve-linux-ptrace.c:216
msgid "Invalid SVE header from kernel."
msgstr ""

#: nat/linux-procfs.c:290
#, possible-c-format
msgid "Could not open /proc/%ld/task."
msgstr ""

#: nat/linux-procfs.c:375
msgid "/proc is not accessible."
msgstr ""

#: nat/mips-linux-watch.c:36 nat/mips-linux-watch.c:54
#: nat/mips-linux-watch.c:71 nat/mips-linux-watch.c:89
#: nat/mips-linux-watch.c:112 nat/mips-linux-watch.c:130
#: nat/mips-linux-watch.c:151
msgid "Unrecognized watch register style"
msgstr ""

#: nds32-tdep.c:417 nds32-tdep.c:432
#, possible-c-format
msgid "Unknown nds32 pseudo register %d."
msgstr ""

#. If use_fpr, but no floating-point register exists,
#. then it is an error.
#: nds32-tdep.c:1650
msgid "Fail to call. FPU registers are required."
msgstr ""

#: nds32-tdep.c:1677
#, possible-c-format
msgid "Cannot extract return value of %d bytes long floating-point."
msgstr ""

#: nds32-tdep.c:1767
#, possible-c-format
msgid "Cannot store return value of %d bytes long floating-point."
msgstr ""

#: nios2-tdep.c:2401
msgid "Set Nios II debugging."
msgstr ""

#: nios2-tdep.c:2402
msgid "Show Nios II debugging."
msgstr ""

#: nios2-tdep.c:2403
msgid "When on, Nios II specific debugging is enabled."
msgstr ""

#: nto-procfs.c:131
msgid "QNX Neutrino local process"
msgstr ""

#: nto-procfs.c:132
msgid "QNX Neutrino local process (started by the \"run\" command)."
msgstr ""

#: nto-procfs.c:145
msgid "QNX Neutrino local or remote process"
msgstr ""

#: nto-procfs.c:146
msgid "QNX Neutrino process.  target procfs NODE"
msgstr ""

#: nto-procfs.c:179
msgid "Lost the QNX node.  Debug session probably over."
msgstr ""

#: nto-procfs.c:246
msgid "Invalid procfs arg"
msgstr ""

#: nto-procfs.c:254 nto-procfs.c:273
msgid "Devctl failed."
msgstr ""

#: nto-procfs.c:264
msgid "alloca failed."
msgstr ""

#: nto-procfs.c:280
msgid "Invalid target CPU."
msgstr ""

#: nto-procfs.c:703 procfs.c:1879
msgid "Attaching GDB to itself is not a good idea..."
msgstr ""

#: nto-procfs.c:745
#, possible-c-format
msgid "Couldn't open proc file %s, error %d (%s)"
msgstr ""

#: nto-procfs.c:748
msgid "Couldn't stop process"
msgstr ""

#: nto-procfs.c:769
msgid ""
"Interrupted while waiting for the program.\n"
"Give up (and stop debugging it)? "
msgstr ""

#: nto-procfs.c:1123
msgid "run error!\n"
msgstr ""

#: nto-procfs.c:1297
#, possible-c-format
msgid "Error spawning %s: %d (%s)"
msgstr ""

#: nto-procfs.c:1529
msgid "pidlist"
msgstr ""

#: nto-procfs.c:1530
msgid "memory information"
msgstr ""

#: nto-procfs.c:1560
msgid "Failed to set hardware watchpoint"
msgstr ""

#: objc-lang.c:127
msgid "no way to lookup Objective-C classes"
msgstr ""

#: objc-lang.c:156
msgid "no way to lookup Objective-C selectors"
msgstr ""

#: objc-lang.c:204
msgid "NSString: internal error -- no way to create new NSString"
msgstr ""

#: objc-lang.c:496
#, possible-c-format
msgid "Can't find selector \"%s\""
msgstr ""

#: objc-lang.c:543
msgid "internal: compare_selectors(1)"
msgstr ""

#: objc-lang.c:548
msgid "internal: compare_selectors(2)"
msgstr ""

#: objc-lang.c:591 objc-lang.c:745
#, possible-c-format
msgid "Regexp is too long: %s"
msgstr ""

#: objc-lang.c:604 objc-lang.c:758 thread.c:1917
#, possible-c-format
msgid "Invalid regexp (%s): %s"
msgstr ""

#: objc-lang.c:625
#, possible-c-format
msgid "Bad method name '%s'"
msgstr ""

#: objc-lang.c:643
#, possible-c-format
msgid ""
"Selectors matching \"%s\":\n"
"\n"
msgstr ""

#: objc-lang.c:693
#, possible-c-format
msgid "No selectors matching \"%s\"\n"
msgstr ""

#: objc-lang.c:712
msgid "internal: compare_classes(1)"
msgstr ""

#: objc-lang.c:785
#, possible-c-format
msgid ""
"Classes matching \"%s\":\n"
"\n"
msgstr ""

#: objc-lang.c:827
#, possible-c-format
msgid "No classes matching \"%s\"\n"
msgstr ""

#: objc-lang.c:1190
msgid "Unable to locate _NSPrintForDebugger in child process"
msgstr ""

#: objc-lang.c:1196
msgid "object returns null description"
msgstr ""

#: objc-lang.c:1207
msgid "<object returns empty description>"
msgstr ""

#: objc-lang.c:1339
msgid "All Objective-C selectors, or those matching REGEXP."
msgstr ""

#: objc-lang.c:1341
msgid "All Objective-C classes, or those matching REGEXP."
msgstr ""

#: objc-lang.c:1343
msgid "Ask an Objective-C object to print itself."
msgstr ""

#: objfiles.c:425
msgid "Entry point address is not known."
msgstr ""

#: objfiles.c:494
msgid "unlink_objfile: objfile already unlinked"
msgstr ""

#: objfiles.c:518
msgid "put_objfile_before: before objfile not in list"
msgstr ""

#: objfiles.c:1212
#, possible-c-format
msgid ""
"unexpected overlap between:\n"
" (A) section `%s' from `%s' [%s, %s)\n"
" (B) section `%s' from `%s' [%s, %s).\n"
"Will ignore section B"
msgstr ""

#. Nothing.
#: objfiles.h:729
msgid "sect_index_data not initialized"
msgstr ""

#: objfiles.h:735
msgid "sect_index_rodata not initialized"
msgstr ""

#: objfiles.h:741
msgid "sect_index_text not initialized"
msgstr ""

#: observable.c:86
#, possible-c-format
msgid "Observer debugging is %s.\n"
msgstr ""

#: observable.c:93
msgid "Set observer debugging."
msgstr ""

#: observable.c:94
msgid "Show observer debugging."
msgstr ""

#: observable.c:95
msgid "When non-zero, observer debugging is enabled."
msgstr ""

#: opencl-lang.c:90
#, possible-c-format
msgid "Invalid OpenCL vector size: %d"
msgstr ""

#: opencl-lang.c:182 opencl-lang.c:211 opencl-lang.c:390 opencl-lang.c:507
#: opencl-lang.c:600 opencl-lang.c:911 valarith.c:1308 valarith.c:1354
#: valarith.c:1656 valarith.c:1689 valops.c:865
msgid "Could not determine the vector bounds"
msgstr ""

#: opencl-lang.c:398
msgid "Invalid OpenCL vector size"
msgstr ""

#: opencl-lang.c:445 opencl-lang.c:465 opencl-lang.c:470 opencl-lang.c:474
#: opencl-lang.c:484
#, possible-c-format
msgid "Invalid OpenCL vector component accessor %s"
msgstr ""

#: opencl-lang.c:569
msgid "Attempt to perform an unsupported operation"
msgstr ""

#: opencl-lang.c:593
msgid "Vector operations are not supported on scalar types"
msgstr ""

#: opencl-lang.c:607 opencl-lang.c:918 valarith.c:1364
msgid "Cannot perform operation on vectors with different types"
msgstr ""

#: opencl-lang.c:714 valarith.c:1407
msgid "Argument to operation not a number or boolean."
msgstr ""

#. Throw an error if arg2 or arg3 aren't vectors.
#: opencl-lang.c:901
msgid "Cannot perform conditional operation on incompatible types"
msgstr ""

#: opencl-lang.c:924
msgid "Cannot perform conditional operation on vectors with different sizes"
msgstr ""

#: or1k-tdep.c:59
#, possible-c-format
msgid "OpenRISC debugging is %s.\n"
msgstr ""

#: or1k-tdep.c:134
#, possible-c-format
msgid "bitstring \"%s\" at offset %d has no length field."
msgstr ""

#: or1k-tdep.c:143
#, possible-c-format
msgid "bitstring \"%s\" at offset %d has no terminating 'b'."
msgstr ""

#: or1k-tdep.c:160
#, possible-c-format
msgid "invalid character in bitstring \"%s\" at offset %d."
msgstr ""

#: or1k-tdep.c:937 s12z-tdep.c:330
#, possible-c-format
msgid "end addr %s is less than start addr %s"
msgstr ""

#: or1k-tdep.c:1282
msgid "Set OpenRISC debugging."
msgstr ""

#: or1k-tdep.c:1283
msgid "Show OpenRISC debugging."
msgstr ""

#: or1k-tdep.c:1284
msgid "When on, OpenRISC specific debugging is enabled."
msgstr ""

#: osabi.c:159
#, possible-c-format
msgid ""
"gdbarch_register_osabi: An attempt to register a handler for OS ABI \"%s\" "
"for architecture %s was made.  The handler will not be registered"
msgstr ""

#: osabi.c:177
#, possible-c-format
msgid ""
"gdbarch_register_osabi: A handler for OS ABI \"%s\" has already been "
"registered for architecture %s"
msgstr ""

#: osabi.c:269
#, possible-c-format
msgid ""
"gdbarch_lookup_osabi: invalid OS ABI (%d) from sniffer for architecture %s "
"flavour %d"
msgstr ""

#: osabi.c:288
#, possible-c-format
msgid ""
"gdbarch_lookup_osabi: multiple %sspecific OS ABI match for architecture %s "
"flavour %d: first match \"%s\", second match \"%s\""
msgstr ""

#: osabi.c:493
#, possible-c-format
msgid "GNU ABI tag value %u unrecognized."
msgstr ""

#: osabi.c:627
#, possible-c-format
msgid "Invalid OS ABI \"%s\" passed to command handler."
msgstr ""

#: osabi.c:635
msgid "Updating OS ABI failed."
msgstr ""

#: osabi.c:644
#, possible-c-format
msgid "The current OS ABI is \"auto\" (currently \"%s\").\n"
msgstr ""

#: osabi.c:648
#, possible-c-format
msgid "The current OS ABI is \"%s\".\n"
msgstr ""

#: osabi.c:652
#, possible-c-format
msgid "The default OS ABI is \"%s\".\n"
msgstr ""

#: osabi.c:662
msgid "_initialize_gdb_osabi: gdb_osabi_names[] is inconsistent"
msgstr ""

#: osabi.c:672
msgid "Set OS ABI of target."
msgstr ""

#: osabi.c:673
msgid "Show OS ABI of target."
msgstr ""

#: osdata.c:37
msgid "Can not parse XML OS data; XML support was disabled at compile time"
msgstr ""

#: osdata.c:64
msgid "Seen more than on osdata element"
msgstr ""

#: osdata.c:150
msgid "osdata"
msgstr ""

#: osdata.c:172
msgid "Empty data returned by target.  Wrong osdata type?"
msgstr ""

#: osdata.c:174
msgid "Empty type list returned by target.  No type data?"
msgstr ""

#: osdata.c:181
msgid "Can not fetch data now."
msgstr ""

#: osdata.c:212
msgid "Available types of OS data not reported."
msgstr ""

#: osdata.c:296
msgid "Show OS data ARG."
msgstr ""

#: p-typeprint.c:303
msgid "type not handled in pascal_type_print_varspec_prefix()"
msgstr ""

#: p-typeprint.c:436
msgid "type not handled in pascal_type_print_varspec_suffix()"
msgstr ""

#: p-valprint.c:416
#, possible-c-format
msgid "Invalid pascal type code %d in symbol table."
msgstr ""

#: p-valprint.c:463
#, possible-c-format
msgid "Printing of pascal static members is %s.\n"
msgstr ""

#: p-valprint.c:898
msgid "Set printing of pascal static members."
msgstr ""

#: p-valprint.c:899
msgid "Show printing of pascal static members."
msgstr ""

#: parse.c:73
#, possible-c-format
msgid "Expression debugging is %s.\n"
msgstr ""

#: parse.c:84
#, possible-c-format
msgid "Parser debugging is %s.\n"
msgstr ""

#: parse.c:781
msgid "?error in operator_length_standard"
msgstr ""

#: parse.c:1052
msgid "expression to compute"
msgstr ""

#: parse.c:1169
msgid "Junk after end of expression."
msgstr ""

#: parse.c:1444
msgid "Set expression debugging."
msgstr ""

#: parse.c:1445
msgid "Show expression debugging."
msgstr ""

#: parse.c:1446
msgid ""
"When non-zero, the internal representation of expressions will be printed."
msgstr ""

#: parse.c:1453
msgid "Set parser debugging."
msgstr ""

#: parse.c:1454
msgid "Show parser debugging."
msgstr ""

#: parse.c:1455
msgid "When non-zero, expression parser tracing will be enabled."
msgstr ""

#: ppc-fbsd-tdep.c:308
msgid "Unable to fetch tcb pointer"
msgstr ""

#: ppc-linux-nat.c:429 ppc-linux-nat.c:1049 ppc-linux-nat.c:2632
msgid "Unable to fetch VSX registers"
msgstr ""

#: ppc-linux-nat.c:456 ppc-linux-nat.c:1077 ppc-linux-nat.c:2646
msgid "Unable to fetch AltiVec registers"
msgstr ""

#. Anything else needs to be reported.
#: ppc-linux-nat.c:486 ppc-linux-nat.c:2611
msgid "Unable to fetch SPE registers"
msgstr ""

#: ppc-linux-nat.c:555 ppc-linux-nat.c:579 s390-linux-nat.c:362
#: s390-linux-nat.c:382
msgid "Couldn't get register set"
msgstr ""

#: ppc-linux-nat.c:584 s390-linux-nat.c:387
msgid "Couldn't set register set"
msgstr ""

#: ppc-linux-nat.c:813
#, possible-c-format
msgid "fetch_register: unexpected byte order: %d"
msgstr ""

#: ppc-linux-nat.c:837 ppc-linux-nat.c:1389
msgid "Couldn't get general-purpose registers."
msgstr ""

#: ppc-linux-nat.c:889 ppc-linux-nat.c:1451
msgid "Couldn't get floating-point registers."
msgstr ""

#: ppc-linux-nat.c:1057
msgid "Unable to store VSX registers"
msgstr ""

#: ppc-linux-nat.c:1085
msgid "Unable to store AltiVec registers"
msgstr ""

#. Anything else needs to be reported.
#: ppc-linux-nat.c:1112
msgid "Unable to set SPE registers"
msgstr ""

#: ppc-linux-nat.c:1401
msgid "Couldn't set general-purpose registers."
msgstr ""

#: ppc-linux-nat.c:1463
msgid "Couldn't set floating-point registers."
msgstr ""

#: ppc-linux-nat.c:1796
msgid "Unexpected error setting breakpoint or watchpoint"
msgstr ""

#: ppc-linux-nat.c:1843
msgid "Unexpected error deleting breakpoint or watchpoint"
msgstr ""

#: ppc-linux-nat.c:2501
msgid "The given mask covers kernel address space and cannot be used.\n"
msgstr ""

#: ppc-linux-tdep.c:1881
msgid "unexpected wordsize"
msgstr ""

#. Can't happen.
#: ppc-sysv-tdep.c:652
msgid "Unknown decimal float size."
msgstr ""

#: printcmd.c:96
#, possible-c-format
msgid "The largest offset that will be printed in <symbol+1234> form is %s.\n"
msgstr ""

#: printcmd.c:108
#, possible-c-format
msgid "Printing of source filename and line number with <symbol> is %s.\n"
msgstr ""

#: printcmd.c:399
#, possible-c-format
msgid "Undefined output size \"%c\"."
msgstr ""

#: printcmd.c:503
#, possible-c-format
msgid "Undefined output format \"%c\"."
msgstr ""

#. We reach here when line info is not available.  In this case,
#. we print a message and just exit the loop.  The return value
#. is calculated after the loop.
#: printcmd.c:803
msgid "No line number information available for address "
msgstr ""

#. The read was unsuccessful, so exit the loop.
#: printcmd.c:889
#, possible-c-format
msgid "Cannot access memory at address %s\n"
msgstr ""

#: printcmd.c:1040
#, possible-c-format
msgid "Unable to display strings with size '%c', using 'b' instead."
msgstr ""

#: printcmd.c:1137
#, possible-c-format
msgid "Size letters are meaningless in \"%s\" command."
msgstr ""

#: printcmd.c:1139
#, possible-c-format
msgid "Item count other than 1 is meaningless in \"%s\" command."
msgstr ""

#: printcmd.c:1142
#, possible-c-format
msgid "Format letter \"%c\" is meaningless in \"%s\" command."
msgstr ""

#: printcmd.c:1312
msgid "Expression is not an assignment (and might have no effect)"
msgstr ""

#: printcmd.c:1328
msgid "address"
msgstr ""

#: printcmd.c:1352
msgid "mapped"
msgstr ""

#: printcmd.c:1352
msgid "unmapped"
msgstr ""

#: printcmd.c:1373
#, possible-c-format
msgid "%s in load address range of %s overlay section %s of %s\n"
msgstr ""

#: printcmd.c:1377
#, possible-c-format
msgid "%s in load address range of section %s of %s\n"
msgstr ""

#: printcmd.c:1382
#, possible-c-format
msgid "%s in %s overlay section %s of %s\n"
msgstr ""

#: printcmd.c:1385
#, possible-c-format
msgid "%s in section %s of %s\n"
msgstr ""

#: printcmd.c:1390
#, possible-c-format
msgid "%s in load address range of %s overlay section %s\n"
msgstr ""

#: printcmd.c:1395
#, possible-c-format
msgid "%s in load address range of section %s\n"
msgstr ""

#: printcmd.c:1399
#, possible-c-format
msgid "%s in %s overlay section %s\n"
msgstr ""

#: printcmd.c:1402
#, possible-c-format
msgid "%s in section %s\n"
msgstr ""

#: printcmd.c:1407
#, possible-c-format
msgid "No symbol matches %s.\n"
msgstr ""

#: printcmd.c:1423
msgid "Argument required."
msgstr ""

#: printcmd.c:1531
#, possible-c-format
msgid "an argument in register %s"
msgstr ""

#: printcmd.c:1534
#, possible-c-format
msgid "a variable in register %s"
msgstr ""

#: printcmd.c:1539 printcmd.c:1616
msgid "static storage at address "
msgstr ""

#: printcmd.c:1546 printcmd.c:1585 printcmd.c:1622
msgid ""
",\n"
" -- loaded at "
msgstr ""

#: printcmd.c:1549 printcmd.c:1588 printcmd.c:1626
#, possible-c-format
msgid " in overlay section %s"
msgstr ""

#: printcmd.c:1557
#, possible-c-format
msgid "address of an argument in register %s"
msgstr ""

#: printcmd.c:1562
#, possible-c-format
msgid "an argument at offset %ld"
msgstr ""

#: printcmd.c:1566
#, possible-c-format
msgid "a local variable at frame offset %ld"
msgstr ""

#: printcmd.c:1570
#, possible-c-format
msgid "a reference argument at offset %ld"
msgstr ""

#: printcmd.c:1574
msgid "a typedef"
msgstr ""

#: printcmd.c:1578
msgid "a function at address "
msgstr ""

#: printcmd.c:1608
#, possible-c-format
msgid ""
"a thread-local variable at offset %s in the thread-local storage for `%s'"
msgstr ""

#: printcmd.c:1635
msgid "optimized out"
msgstr ""

#: printcmd.c:1639
msgid "of unknown (botched) type"
msgstr ""

#: printcmd.c:1698
msgid "starting display address"
msgstr ""

#: printcmd.c:1853
msgid "one or more display numbers"
msgstr ""

#: printcmd.c:1863
#, possible-c-format
msgid "bad display number at or near '%s'"
msgstr ""

#: printcmd.c:1872 printcmd.c:2079
#, possible-c-format
msgid "No display number %d.\n"
msgstr ""

#: printcmd.c:1894
msgid "Delete all auto-display expressions? "
msgstr ""

#: printcmd.c:1942
#, possible-c-format
msgid "Unable to display \"%s\": %s"
msgstr ""

#: printcmd.c:2006
#, possible-c-format
msgid "%p[<error: %s>%p]\n"
msgstr ""

#: printcmd.c:2089
#, possible-c-format
msgid "Disabling display %d to avoid infinite recursion.\n"
msgstr ""

#: printcmd.c:2102
msgid "There are no auto-display expressions now.\n"
msgstr ""

#: printcmd.c:2104
msgid ""
"Auto-display expressions now in effect:\n"
"Num Enb Expression\n"
msgstr ""

#: printcmd.c:2117
msgid " (cannot be evaluated in the current context)"
msgstr ""

#: printcmd.c:2539
msgid "format-control string and values to print"
msgstr ""

#: printcmd.c:2614
#, possible-c-format
msgid "expected wchar_t argument for %%lc"
msgstr ""

#: printcmd.c:2646
msgid "long long not supported in printf"
msgstr ""

#: printcmd.c:2750
msgid ""
"Describe where symbol SYM is stored.\n"
"Usage: info address SYM"
msgstr ""

#: printcmd.c:2753
msgid ""
"Describe what symbol is at location ADDR.\n"
"Usage: info symbol ADDR\n"
"Only for symbols with fixed locations (global or static scope)."
msgstr ""

#: printcmd.c:2758
msgid ""
"Examine memory: x/FMT ADDRESS.\n"
"ADDRESS is an expression for the memory address to examine.\n"
"FMT is a repeat count followed by a format letter and a size letter.\n"
"Format letters are o(octal), x(hex), d(decimal), u(unsigned decimal),\n"
"  t(binary), f(float), a(address), i(instruction), c(char), s(string)\n"
"  and z(hex, zero padded on the left).\n"
"Size letters are b(byte), h(halfword), w(word), g(giant, 8 bytes).\n"
"The specified number of objects of the specified size are printed\n"
"according to the format.  If a negative number is specified, memory is\n"
"examined backward from the address.\n"
"\n"
"Defaults for format and size letters are those previously used.\n"
"Default count is 1.  Default address is following last thing printed\n"
"with this command or \"print\"."
msgstr ""

#: printcmd.c:2773
msgid ""
"Expressions to display when program stops, with code numbers.\n"
"Usage: info display"
msgstr ""

#: printcmd.c:2777
msgid ""
"Cancel some expressions to be displayed when program stops.\n"
"Usage: undisplay [NUM]...\n"
"Arguments are the code numbers of the expressions to stop displaying.\n"
"No argument means cancel all automatic-display expressions.\n"
"\"delete display\" has the same effect as this command.\n"
"Do \"info display\" to see current list of code numbers."
msgstr ""

#: printcmd.c:2786
msgid ""
"Print value of expression EXP each time the program stops.\n"
"Usage: display[/FMT] EXP\n"
"/FMT may be used before EXP as in the \"print\" command.\n"
"/FMT \"i\" or \"s\" or including a size-letter is allowed,\n"
"as in the \"x\" command, and then EXP is used to get the address to examine\n"
"and examining is done as in the \"x\" command.\n"
"\n"
"With no argument, display all currently requested auto-display expressions.\n"
"Use \"undisplay\" to cancel display requests previously made."
msgstr ""

#: printcmd.c:2796
msgid ""
"Enable some expressions to be displayed when program stops.\n"
"Usage: enable display [NUM]...\n"
"Arguments are the code numbers of the expressions to resume displaying.\n"
"No argument means enable all automatic-display expressions.\n"
"Do \"info display\" to see current list of code numbers."
msgstr ""

#: printcmd.c:2803
msgid ""
"Disable some expressions to be displayed when program stops.\n"
"Usage: disable display [NUM]...\n"
"Arguments are the code numbers of the expressions to stop displaying.\n"
"No argument means disable all automatic-display expressions.\n"
"Do \"info display\" to see current list of code numbers."
msgstr ""

#: printcmd.c:2810
msgid ""
"Cancel some expressions to be displayed when program stops.\n"
"Usage: delete display [NUM]...\n"
"Arguments are the code numbers of the expressions to stop displaying.\n"
"No argument means cancel all automatic-display expressions.\n"
"Do \"info display\" to see current list of code numbers."
msgstr ""

#: printcmd.c:2817
#, possible-c-format
msgid ""
"Formatted printing, like the C \"printf\" function.\n"
"Usage: printf \"format string\", ARG1, ARG2, ARG3, ..., ARGN\n"
"This supports most C printf format specifications, like %s, %d, etc."
msgstr ""

#: printcmd.c:2822
msgid ""
"Like \"print\" but don't put in value history and don't print newline.\n"
"Usage: output EXP\n"
"This is useful in user-defined commands."
msgstr ""

#: printcmd.c:2827
msgid ""
"Evaluate expression EXP and assign result to variable VAR.\n"
"Usage: set VAR = EXP\n"
"This uses assignment syntax appropriate for the current language\n"
"(VAR = EXP or VAR := EXP for example).\n"
"VAR may be a debugger \"convenience\" variable (names starting\n"
"with $), a register (a few standard names starting with $), or an actual\n"
"variable in the program being debugged.  EXP is any valid expression.\n"
"Use \"set variable\" for variables with names identical to set subcommands.\n"
"\n"
"With a subcommand, this command modifies parts of the gdb environment.\n"
"You can see these environment settings with the \"show\" command."
msgstr ""

#: printcmd.c:2841
msgid ""
"Evaluate expression EXP and assign result to variable VAR.\n"
"Usage: assign VAR = EXP\n"
"This uses assignment syntax appropriate for the current language\n"
"(VAR = EXP or VAR := EXP for example).\n"
"VAR may be a debugger \"convenience\" variable (names starting\n"
"with $), a register (a few standard names starting with $), or an actual\n"
"variable in the program being debugged.  EXP is any valid expression.\n"
"Use \"set variable\" for variables with names identical to set subcommands.\n"
"\n"
"With a subcommand, this command modifies parts of the gdb environment.\n"
"You can see these environment settings with the \"show\" command."
msgstr ""

#. "call" is the same as "set", but handy for dbx users to call fns.
#: printcmd.c:2854
msgid ""
"Call a function in the program.\n"
"Usage: call EXP\n"
"The argument is the function name and arguments, in the notation of the\n"
"current working language.  The result is printed and saved in the value\n"
"history, if it is not void."
msgstr ""

#: printcmd.c:2862
msgid ""
"Evaluate expression EXP and assign result to variable VAR.\n"
"Usage: set variable VAR = EXP\n"
"This uses assignment syntax appropriate for the current language\n"
"(VAR = EXP or VAR := EXP for example).\n"
"VAR may be a debugger \"convenience\" variable (names starting\n"
"with $), a register (a few standard names starting with $), or an actual\n"
"variable in the program being debugged.  EXP is any valid expression.\n"
"This may usually be abbreviated to simply \"set\"."
msgstr ""

#: printcmd.c:2876
msgid ""
"Print value of expression EXP.\n"
"Usage: print [[OPTION]... --] [/FMT] [EXP]\n"
"\n"
"Options:\n"
"%OPTIONS%\n"
"\n"
"Note: because this command accepts arbitrary expressions, if you\n"
"specify any command option, you must use a double dash (\"--\")\n"
"to mark the end of option processing.  E.g.: \"print -o -- myobj\".\n"
"\n"
"Variables accessible are those of the lexical environment of the selected\n"
"stack frame, plus all those whose scope is global or an entire file.\n"
"\n"
"$NUM gets previous value number NUM.  $ and $$ are the last two values.\n"
"$$NUM refers to NUM'th value back from the last one.\n"
"Names starting with $ refer to registers (with the values they would have\n"
"if the program were to return to the stack frame now selected, restoring\n"
"all registers saved by frames farther in) or else to debugger\n"
"\"convenience\" variables (any such name not a known register).\n"
"Use assignment expressions to give values to convenience variables.\n"
"\n"
"{TYPE}ADREXP refers to a datum of data type TYPE, located at address "
"ADREXP.\n"
"@ is a binary operator for treating consecutive data objects\n"
"anywhere in memory as an array.  FOO@NUM gives an array whose first\n"
"element is FOO, whose second element is stored in the space following\n"
"where FOO is stored, etc.  FOO must be an expression whose value\n"
"resides in memory.\n"
"\n"
"EXP may be preceded with /FMT, where FMT is a format letter\n"
"but no count or size letter (see \"x\" command)."
msgstr ""

#: printcmd.c:2915
msgid "Set the largest offset that will be printed in <SYMBOL+1234> form."
msgstr ""

#: printcmd.c:2916
msgid "Show the largest offset that will be printed in <SYMBOL+1234> form."
msgstr ""

#: printcmd.c:2917
msgid ""
"Tell GDB to only display the symbolic form of an address if the\n"
"offset between the closest earlier symbol and the address is less than\n"
"the specified maximum offset.  The default is \"unlimited\", which tells "
"GDB\n"
"to always print the symbolic form of an address if any symbol precedes\n"
"it.  Zero is equivalent to \"unlimited\"."
msgstr ""

#: printcmd.c:2927
msgid "Set printing of source filename and line number with <SYMBOL>."
msgstr ""

#: printcmd.c:2928
msgid "Show printing of source filename and line number with <SYMBOL>."
msgstr ""

#: printcmd.c:2934
msgid ""
"Construct a GDB command and then evaluate it.\n"
"Usage: eval \"format string\", ARG1, ARG2, ARG3, ..., ARGN\n"
"Convert the arguments to a string as \"printf\" would, but then\n"
"treat this string as a command line, and evaluate it."
msgstr ""

#: probe.c:131
#, possible-c-format
msgid "'%s' is not a probe linespec"
msgstr ""

#: probe.c:136
#, possible-c-format
msgid "argument to `%s' missing"
msgstr ""

#: probe.c:174
msgid "no probe name specified"
msgstr ""

#: probe.c:176
msgid "invalid provider name"
msgstr ""

#: probe.c:178
msgid "invalid objfile name"
msgstr ""

#: probe.c:198
#, possible-c-format
msgid "No probe matching objfile=`%s', provider=`%s', name=`%s'"
msgstr ""

#: probe.c:199 probe.c:200
msgid "<any>"
msgstr ""

#: probe.c:289
msgid "Invalid provider regexp"
msgstr ""

#: probe.c:292
msgid "Invalid probe regexp"
msgstr ""

#: probe.c:295
msgid "Invalid object file regexp"
msgstr ""

#: probe.c:410
msgid "n/a"
msgstr ""

#: probe.c:548
msgid "Type"
msgstr ""

#: probe.c:550
msgid "Provider"
msgstr ""

#: probe.c:551
msgid "Name"
msgstr ""

#: probe.c:552
msgid "Where"
msgstr ""

#: probe.c:566
msgid "Object"
msgstr ""

#: probe.c:605 probe.c:629 probe.c:664
msgid "No probes matched.\n"
msgstr ""

#: probe.c:640
#, possible-c-format
msgid "Probe %s:%s enabled.\n"
msgstr ""

#: probe.c:645
#, possible-c-format
msgid "Probe %s:%s cannot be enabled.\n"
msgstr ""

#: probe.c:675
#, possible-c-format
msgid "Probe %s:%s disabled.\n"
msgstr ""

#: probe.c:680
#, possible-c-format
msgid "Probe %s:%s cannot be disabled.\n"
msgstr ""

#: probe.c:784
msgid ""
"Show available static probes.\n"
"Usage: info probes [all|TYPE [ARGS]]\n"
"TYPE specifies the type of the probe, and can be one of the following:\n"
"  - stap\n"
"If you specify TYPE, there may be additional arguments needed by the\n"
"subcommand.\n"
"If you do not specify any argument, or specify `all', then the command\n"
"will show information about all types of probes."
msgstr ""

#: probe.c:819 probe.c:849
#, possible-c-format
msgid "No probe at PC %s"
msgstr ""

#: probe.c:826
#, possible-c-format
msgid "Invalid probe argument %d -- probe has %u arguments available"
msgstr ""

#: probe.c:863
#, possible-c-format
msgid "Invalid probe argument %d -- probe has %d arguments available"
msgstr ""

#: probe.c:912
msgid "Show information about all type of probes."
msgstr ""

#: probe.c:916
msgid ""
"Enable probes.\n"
"Usage: enable probes [PROVIDER [NAME [OBJECT]]]\n"
"Each argument is a regular expression, used to select probes.\n"
"PROVIDER matches probe provider names.\n"
"NAME matches the probe names.\n"
"OBJECT matches the executable or shared library name.\n"
"If you do not specify any argument then the command will enable\n"
"all defined probes."
msgstr ""

#: probe.c:927
msgid ""
"Disable probes.\n"
"Usage: disable probes [PROVIDER [NAME [OBJECT]]]\n"
"Each argument is a regular expression, used to select probes.\n"
"PROVIDER matches probe provider names.\n"
"NAME matches the probe names.\n"
"OBJECT matches the executable or shared library name.\n"
"If you do not specify any argument then the command will disable\n"
"all defined probes."
msgstr ""

#: proc-api.c:422
msgid "Set tracing for /proc api calls."
msgstr ""

#: proc-api.c:423
msgid "Show tracing for /proc api calls."
msgstr ""

#: proc-api.c:430
msgid "Set filename for /proc tracefile."
msgstr ""

#: proc-api.c:431
msgid "Show filename for /proc tracefile."
msgstr ""

#: process-stratum-target.c:36
#, possible-c-format
msgid "Can't determine the current address space of thread %s\n"
msgstr ""

#: procfs.c:330
#, possible-c-format
msgid "procfs: couldn't find pid %d (kernel thread %d) in procinfo list."
msgstr ""

#: procfs.c:334
#, possible-c-format
msgid "procfs: couldn't find pid %d in procinfo list."
msgstr ""

#: procfs.c:809
#, possible-c-format
msgid "procfs: modify_flag failed to turn %s %s"
msgstr ""

#: procfs.c:1003
msgid "procfs: set_traced_signals failed"
msgstr ""

#: procfs.c:1626
#, possible-c-format
msgid "procfs_find_LDT_entry: could not find procinfo for %d:%ld."
msgstr ""

#: procfs.c:1634
#, possible-c-format
msgid "procfs_find_LDT_entry: could not read gregs for %d:%ld."
msgstr ""

#: procfs.c:1886
#, possible-c-format
msgid "Attaching to program `%s', %s\n"
msgstr ""

#: procfs.c:1912 target.c:3175
#, possible-c-format
msgid "Detaching from program: %s, %s\n"
msgstr ""

#: procfs.c:1933
msgid "procfs: out of memory in 'attach'"
msgstr ""

#: procfs.c:2022
msgid "Was stopped when attached, make it runnable again? "
msgstr ""

#: procfs.c:2065
#, possible-c-format
msgid "procfs: fetch_registers failed to find procinfo for %s"
msgstr ""

#: procfs.c:2114
#, possible-c-format
msgid "procfs: store_registers: failed to find procinfo for %s"
msgstr ""

#: procfs.c:2233
#, possible-c-format
msgid "procfs: couldn't stop process %d: wait returned %d."
msgstr ""

#: procfs.c:2339
msgid "procfs: trapped on entry to "
msgstr ""

#: procfs.c:2350 procfs.c:2436
#, possible-c-format
msgid "%ld syscall arguments:\n"
msgstr ""

#: procfs.c:2425
msgid "procfs: trapped on exit from "
msgstr ""

#: procfs.c:2454
#, possible-c-format
msgid "Retry #%d:\n"
msgstr ""

#: procfs.c:2487
msgid "child stopped for unknown reason:\n"
msgstr ""

#: procfs.c:2489
msgid "... giving up..."
msgstr ""

#: procfs.c:2514
msgid "procfs: ...giving up..."
msgstr ""

#: procfs.c:2741
msgid ""
"resume: target already running.  Pretend to resume, and hope for the best!"
msgstr ""

#: procfs.c:2777
#, possible-c-format
msgid "\tUsing the running image of %s %s via /proc.\n"
msgstr ""

#: procfs.c:2868
msgid "procfs: out of memory in 'init_inferior'"
msgstr ""

#: procfs.c:2951
msgid "procfs: create_procinfo failed in child."
msgstr ""

#. Not found.  This must be an error rather than merely passing
#. the file to execlp(), because execlp() would try all the
#. exec()s, causing GDB to get confused.
#: procfs.c:3081
#, possible-c-format
msgid "procfs:%d -- Can't find shell %s in PATH"
msgstr ""

#: procfs.c:3595
#, possible-c-format
msgid "process %d flags:\n"
msgstr ""

#: procfs.c:3605
#, possible-c-format
msgid "thread %d flags:\n"
msgstr ""

#: procfs.c:3663
msgid "you must be debugging a process to use this command."
msgstr ""

#: procfs.c:3666
msgid "system call to trace"
msgstr ""

#: procfs.c:3707
msgid "Give a trace of entries into the syscall."
msgstr ""

#: procfs.c:3709
msgid "Give a trace of exits from the syscall."
msgstr ""

#: procfs.c:3711
msgid "Cancel a trace of entries into the syscall."
msgstr ""

#: procfs.c:3713
msgid "Cancel a trace of exits from the syscall."
msgstr ""

#: producer.c:121
#, possible-c-format
msgid "Could not recognize version of Intel Compiler in: \"%s\""
msgstr ""

#: progspace.c:335
#, possible-c-format
msgid "program space ID %d not known."
msgstr ""

#: progspace.c:415
msgid "Info about currently known program spaces."
msgstr ""

#: psymtab.c:106
#, possible-c-format
msgid "Reading symbols from %s...\n"
msgstr ""

#: psymtab.c:116
#, possible-c-format
msgid "(No debugging symbols found in %s)\n"
msgstr ""

#. Might want to error() here (in case symtab is corrupt and
#. will cause a core dump), but maybe we can successfully
#. continue, so let's not.
#: psymtab.c:400
#, possible-c-format
msgid "(Internal error: pc %s in read in psymtab, but not in symtab.)\n"
msgstr ""

#: psymtab.c:798
msgid "select_source_symtab: readin pst found and no symtabs."
msgstr ""

#: psymtab.c:1015
#, possible-c-format
msgid "  Number of psym tables (not yet expanded): %d\n"
msgstr ""

#: psymtab.c:1812 symmisc.c:413
msgid "Missing pc value"
msgstr ""

#: psymtab.c:1818 symmisc.c:419
msgid "Missing source file"
msgstr ""

#: psymtab.c:1824 symmisc.c:425 symmisc.c:698
msgid "Missing objfile name"
msgstr ""

#. Future proofing: Don't allow OUTFILE to begin with "-".
#: psymtab.c:1836 symmisc.c:437 symmisc.c:710
#, possible-c-format
msgid "Unknown option: %s"
msgstr ""

#: psymtab.c:1844 symmisc.c:445
msgid "Must specify at most one of -pc and -source"
msgstr ""

#: psymtab.c:1851 symmisc.c:452 symmisc.c:722
msgid "Junk at end of command"
msgstr ""

#: psymtab.c:1943
#, possible-c-format
msgid "No partial symtab for address: %s"
msgstr ""

#: psymtab.c:1945
#, possible-c-format
msgid "No partial symtab for source file: %s"
msgstr ""

#: psymtab.c:2163
msgid ""
"Print dump of current partial symbol definitions.\n"
"Usage: mt print psymbols [-objfile OBJFILE] [-pc ADDRESS] [--] [OUTFILE]\n"
"       mt print psymbols [-objfile OBJFILE] [-source SOURCE] [--] [OUTFILE]\n"
"Entries in the partial symbol table are dumped to file OUTFILE,\n"
"or the terminal if OUTFILE is unspecified.\n"
"If ADDRESS is provided, dump only the file for that address.\n"
"If SOURCE is provided, dump only that file's symbols.\n"
"If OBJFILE is provided, dump only that file's minimal symbols."
msgstr ""

#: psymtab.c:2174
msgid ""
"List the partial symbol tables for all object files.\n"
"This does not include information about individual partial symbols,\n"
"just the symbol table structures themselves."
msgstr ""

#: psymtab.c:2181
msgid "Check consistency of currently expanded psymtabs versus symtabs."
msgstr ""

#: python/py-auto-load.c:40
#, possible-c-format
msgid "Auto-loading of Python scripts is %s.\n"
msgstr ""

#: python/py-auto-load.c:67
msgid "Set the debugger's behaviour regarding auto-loaded Python scripts."
msgstr ""

#: python/py-auto-load.c:68
msgid "Show the debugger's behaviour regarding auto-loaded Python scripts."
msgstr ""

#: python/py-auto-load.c:69
msgid ""
"If enabled, auto-loaded Python scripts are loaded when the debugger reads\n"
"an executable or shared library.\n"
"This options has security implications for untrusted inferiors."
msgstr ""

#: python/py-auto-load.c:78
msgid ""
"Set the debugger's behaviour regarding auto-loaded Python scripts, "
"deprecated."
msgstr ""

#: python/py-auto-load.c:81
msgid ""
"Show the debugger's behaviour regarding auto-loaded Python scripts, "
"deprecated."
msgstr ""

#: python/py-auto-load.c:96
msgid ""
"Print the list of automatically loaded Python scripts.\n"
"Usage: info auto-load python-scripts [REGEXP]"
msgstr ""

#: python/py-auto-load.c:100
msgid "Print the list of automatically loaded Python scripts, deprecated."
msgstr ""

#: python/py-lazy-string.c:112
msgid "Cannot create a value from NULL."
msgstr ""

#: python/py-lazy-string.c:184
msgid "Cannot create a lazy string with address 0x0, and a non-zero length."
msgstr ""

#: python/py-lazy-string.c:192
msgid "A lazy string's type cannot be NULL."
msgstr ""

#: python/py-value.c:131
msgid "Object must support the python buffer protocol."
msgstr ""

#: python/py-value.c:138
msgid "Size of type is larger than that of buffer object."
msgstr ""

#: python/py-value.c:166
msgid "type argument must be a gdb.Type."
msgstr ""

#: python/py-value.c:174
msgid "Could not allocate memory to create Value object."
msgstr ""

#: python/py-value.c:264
msgid ""
"Trying to get the referenced value from a value which is neither a pointer "
"nor a reference."
msgstr ""

#: python/py-value.c:515
msgid "Length is larger than array size."
msgstr ""

#: python/py-value.c:759
msgid "Argument must be a type."
msgstr ""

#: python/py-value.c:818 python/py-value.c:1615 python/py-value.c:1646
msgid "Invalid operation on gdb.Value."
msgstr ""

#: python/py-value.c:840
msgid "'parent_type' attribute of gdb.Field object is not agdb.Type object."
msgstr ""

#: python/py-value.c:896
msgid "'type' attribute of gdb.Field object is not a gdb.Type object."
msgstr ""

#: python/py-value.c:932
msgid "Invalid lookup for a field not contained in the value."
msgstr ""

#: python/py-value.c:965
msgid "gdb.Field object has no name and no 'bitpos' attribute."
msgstr ""

#: python/py-value.c:1028
msgid "Cannot subscript requested type."
msgstr ""

#: python/py-value.c:1051
msgid "Setting of struct elements is not currently supported."
msgstr ""

#: python/py-value.c:1078
msgid "Value is not callable (not TYPE_CODE_FUNC)."
msgstr ""

#: python/py-value.c:1085
msgid "Inferior arguments must be provided in a tuple."
msgstr ""

#: python/py-value.c:1688
msgid "Cannot convert value to int."
msgstr ""

#: python/py-value.c:1724
msgid "Cannot convert value to long."
msgstr ""

#: python/py-value.c:1761
msgid "Cannot convert value to float."
msgstr ""

#: python/py-value.c:1899
#, possible-c-format
msgid "Could not convert Python object: %S."
msgstr ""

#: python/py-value.c:1902
#, possible-c-format
msgid "Could not convert Python object: %s."
msgstr ""

#. Require a valid block.  All access to block_object->block should be
#. gated by this call.
#: python/py-block.c:63
msgid "Block is invalid."
msgstr ""

#. Require a valid block.  This macro is called during block iterator
#. creation, and at each next call.
#: python/py-block.c:75
msgid "Source block for iterator is invalid."
msgstr ""

#: python/py-block.c:361
msgid "Symbol is null."
msgstr ""

#. Require a valid Architecture.
#: python/py-arch.c:40
msgid "Architecture is invalid."
msgstr ""

#: python/py-arch.c:151
msgid "Argument 'end_pc' should be a (long) integer."
msgstr ""

#: python/py-arch.c:159
msgid ""
"Argument 'end_pc' should be greater than or equal to the argument 'start_pc'."
msgstr ""

#: python/py-arch.c:171
msgid "Argument 'count' should be an non-negative integer."
msgstr ""

#: python/py-prettyprint.c:418
msgid "Result of children iterator not a tuple of two elements."
msgstr ""

#: python/py-prettyprint.c:429
msgid "Bad result from children iterator.\n"
msgstr ""

#: python/py-prettyprint.c:519 python/py-xmethods.c:537
#: python/py-xmethods.c:544 python/py-xmethods.c:558 python/py-xmethods.c:569
#: python/py-xmethods.c:578 python/py-function.c:94 python/python.c:309
#: python/python.c:392 python/python.c:408
msgid "Error while executing Python code."
msgstr ""

#: python/py-prettyprint.c:686
msgid "Argument must be a gdb.Value."
msgstr ""

#: python/py-record.c:80 python/py-record.c:96 python/py-record.c:109
#: python/py-record.c:122 python/py-record.c:135 python/py-record.c:148
#: python/py-record.c:161 python/py-record.c:174 python/py-record.c:205
#: python/py-record.c:218 python/py-record.c:231 python/py-record.c:244
#: python/py-record.c:257 python/py-record.c:270 python/py-record.c:301
#: python/py-record.c:314 python/py-record.c:327 python/py-record.c:340
#: python/py-record.c:353 python/py-record.c:366 python/py-instruction.c:40
msgid "Not implemented."
msgstr ""

#. Require that OBJF be a valid objfile.
#: python/py-objfile.c:66
msgid "Objfile no longer exists."
msgstr ""

#: python/py-objfile.c:245
msgid "Cannot delete the pretty_printers attribute."
msgstr ""

#: python/py-objfile.c:252
msgid "The pretty_printers attribute must be a list."
msgstr ""

#: python/py-objfile.c:284
msgid "Cannot delete the frame filters attribute."
msgstr ""

#: python/py-objfile.c:291
msgid "The frame_filters attribute must be a dictionary."
msgstr ""

#: python/py-objfile.c:324
msgid "Cannot delete the frame unwinders attribute."
msgstr ""

#: python/py-objfile.c:331
msgid "The frame_unwinders attribute must be a list."
msgstr ""

#: python/py-objfile.c:375
msgid "Cannot delete the type_printers attribute."
msgstr ""

#: python/py-objfile.c:382
msgid "The type_printers attribute must be a list."
msgstr ""

#: python/py-objfile.c:642
msgid "Not a valid build id."
msgstr ""

#: python/py-objfile.c:653
msgid "Objfile not found."
msgstr ""

#: python/py-framefilter.c:99
msgid "Unexpected value.  Expecting a gdb.Symbol or a Python string."
msgstr ""

#: python/py-framefilter.c:483
msgid "No symbol or value provided."
msgstr ""

#: python/py-framefilter.c:942
msgid "FrameDecorator.function: expecting a String, integer or None."
msgstr ""

#. We've printed all the frames we were asked to
#. print, but more frames existed.
#: python/py-framefilter.c:1229 stack.c:2087
msgid "(More stack frames follow...)\n"
msgstr ""

#: python/py-param.c:142
msgid "String required for filename."
msgstr ""

#: python/py-param.c:173
msgid "ENUM arguments must be a string."
msgstr ""

#: python/py-param.c:187
msgid "The value must be member of an enumeration."
msgstr ""

#: python/py-param.c:198
msgid "A boolean argument is required."
msgstr ""

#: python/py-param.c:211
msgid "A boolean or None is required"
msgstr ""

#: python/py-param.c:241
msgid "The value must be integer."
msgstr ""

#: python/py-param.c:279
msgid "Range exceeded."
msgstr ""

#: python/py-param.c:292
msgid "Unhandled type in parameter value."
msgstr ""

#: python/py-param.c:313
msgid "Cannot delete a parameter's value."
msgstr ""

#: python/py-param.c:368
msgid "Parameter must return a string value."
msgstr ""

#: python/py-param.c:592
msgid "An enumeration is required for PARAM_ENUM."
msgstr ""

#: python/py-param.c:599
msgid "The enumeration is not a sequence."
msgstr ""

#: python/py-param.c:609
msgid "The enumeration is empty."
msgstr ""

#: python/py-param.c:625
msgid "The enumeration item not a string."
msgstr ""

#: python/py-param.c:682 python/py-cmd.c:470
msgid "Invalid command class argument."
msgstr ""

#: python/py-param.c:695
msgid "Invalid parameter class argument."
msgstr ""

#: python/py-param.c:702
msgid "Only PARAM_ENUM accepts a fourth argument."
msgstr ""

#: python/py-xmethods.c:362
msgid ""
"Arg type returned by the get_arg_types method of a debug method worker "
"object is not a gdb.Type object."
msgstr ""

#: python/py-xmethods.c:381
msgid ""
"Arg type returned by the get_arg_types method of an xmethod worker object is "
"not a gdb.Type object."
msgstr ""

#: python/py-xmethods.c:490
msgid ""
"Type returned by the get_result_type method of an xmethod worker object is "
"not a gdb.Type object."
msgstr ""

#: python/py-unwind.c:182
#, possible-c-format
msgid "The value of the '%s' attribute is not a pointer."
msgstr ""

#: python/py-unwind.c:422
msgid "frame_id should have 'sp' attribute."
msgstr ""

#: python/py-unwind.c:542
msgid "A Unwinder should return gdb.UnwindInfo instance."
msgstr ""

#: python/py-unwind.c:641
msgid "Set Python unwinder debugging."
msgstr ""

#: python/py-unwind.c:642
msgid "Show Python unwinder debugging."
msgstr ""

#: python/py-unwind.c:643
msgid "When non-zero, Python unwinder debugging is enabled."
msgstr ""

#: python/py-breakpoint.c:126
msgid "Cannot delete `enabled' attribute."
msgstr ""

#: python/py-breakpoint.c:133
msgid "The value of `enabled' must be a boolean."
msgstr ""

#: python/py-breakpoint.c:168
msgid "Cannot delete `silent' attribute."
msgstr ""

#: python/py-breakpoint.c:174
msgid "The value of `silent' must be a boolean."
msgstr ""

#: python/py-breakpoint.c:199
msgid "Cannot delete `thread' attribute."
msgstr ""

#: python/py-breakpoint.c:210
msgid "Invalid thread ID."
msgstr ""

#: python/py-breakpoint.c:219
msgid "The value of `thread' must be an integer or None."
msgstr ""

#: python/py-breakpoint.c:241
msgid "Cannot delete `task' attribute."
msgstr ""

#: python/py-breakpoint.c:261
msgid "Invalid task ID."
msgstr ""

#: python/py-breakpoint.c:270
msgid "The value of `task' must be an integer or None."
msgstr ""

#: python/py-breakpoint.c:316
msgid "Cannot delete `ignore_count' attribute."
msgstr ""

#: python/py-breakpoint.c:322
msgid "The value of `ignore_count' must be an integer."
msgstr ""

#: python/py-breakpoint.c:355
msgid "Cannot delete `hit_count' attribute."
msgstr ""

#: python/py-breakpoint.c:368
msgid "The value of `hit_count' must be zero."
msgstr ""

#: python/py-breakpoint.c:449
msgid "Cannot delete `condition' attribute."
msgstr ""

#: python/py-breakpoint.c:684
msgid ""
"Breakpoints specified with spec cannot have source, function, label or line "
"defined."
msgstr ""

#: python/py-breakpoint.c:696
msgid "Watchpoints cannot be set by explicit location parameters."
msgstr ""

#: python/py-breakpoint.c:707
msgid "Neither spec nor explicit location set."
msgstr ""

#: python/py-breakpoint.c:716
msgid "Specifying a source must also include a line, label or function."
msgstr ""

#: python/py-breakpoint.c:764
msgid "Line keyword should be an integer or a string. "
msgstr ""

#: python/py-breakpoint.c:857
msgid "Cannot understand watchpoint access type."
msgstr ""

#: python/py-breakpoint.c:861
msgid "Do not understand breakpoint type to set."
msgstr ""

#: python/py-breakpoint.c:1039
msgid "Error while creating breakpoint from GDB."
msgstr ""

#. Require that BREAKPOINT be a valid breakpoint ID; throw a Python
#. exception if it is invalid.
#. Require that BREAKPOINT be a valid breakpoint ID; throw a Python
#. exception if it is invalid.  This macro is for use in setter functions.
#: python/python-internal.h:348 python/python-internal.h:358
#, possible-c-format
msgid "Breakpoint %d is invalid."
msgstr ""

#: python/py-linetable.c:75
msgid "Symbol Table in line table is invalid."
msgstr ""

#: python/py-linetable.c:198 python/py-linetable.c:229
msgid "Linetable information not found in symbol table"
msgstr ""

#. Require that PSPACE_OBJ be a valid program space ID.
#: python/py-progspace.c:68
msgid "Program space no longer exists."
msgstr ""

#. Require a valid frame.  This must be called inside a TRY_CATCH, or
#. another context in which a gdb exception is allowed.
#: python/py-frame.c:54
msgid "Frame is invalid."
msgstr ""

#: python/py-frame.c:265
msgid "Unknown register."
msgstr ""

#: python/py-frame.c:302
msgid "Cannot locate block for frame."
msgstr ""

#: python/py-frame.c:508 python/py-type.c:929
msgid "Second argument must be block."
msgstr ""

#: python/py-frame.c:533
#, possible-c-format
msgid "Variable '%s' not found."
msgstr ""

#: python/py-frame.c:541
msgid "Argument must be a symbol or string."
msgstr ""

#: python/py-frame.c:635
msgid "Invalid frame stop reason."
msgstr ""

#. Require that INFERIOR be a valid inferior ID.
#: python/py-inferior.c:82
msgid "Inferior no longer exists."
msgstr ""

#: python/py-inferior.c:313
msgid "could not find gdb thread object"
msgstr ""

#: python/py-inferior.c:605
#, possible-c-format
msgid "Memory buffer for address %s, which is %s bytes long."
msgstr ""

#: python/py-inferior.c:640
msgid "The memory buffer supports only one segment."
msgstr ""

#: python/py-inferior.c:717
msgid "Search range is empty."
msgstr ""

#: python/py-inferior.c:725
msgid "The search range is too large."
msgstr ""

#: python/py-inferior.c:798
msgid "Argument 'handle' must be a thread handle object."
msgstr ""

#: python/py-finishbreakpoint.c:185 python/py-finishbreakpoint.c:208
msgid "Invalid ID for the `frame' object."
msgstr ""

#: python/py-finishbreakpoint.c:193
msgid "\"FinishBreakpoint\" not meaningful in the outermost frame."
msgstr ""

#: python/py-finishbreakpoint.c:200
msgid "\"FinishBreakpoint\" cannot be set on a dummy frame."
msgstr ""

#: python/py-finishbreakpoint.c:224
msgid "No thread currently selected."
msgstr ""

#: python/py-finishbreakpoint.c:236
msgid "The value of `internal' must be a boolean."
msgstr ""

#: python/py-cmd.c:116 python/py-cmd.c:183
msgid "Invalid invocation of Python command object."
msgstr ""

#: python/py-cmd.c:124
msgid "Python command object missing 'invoke' method."
msgstr ""

#: python/py-cmd.c:134
msgid "Could not convert arguments to Python string."
msgstr ""

#: python/py-cmd.c:193 python/py-cmd.c:206
msgid "Could not convert argument to Python string."
msgstr ""

#: python/py-cmd.c:369
msgid "No command name found."
msgstr ""

#: python/py-cmd.c:396
#, possible-c-format
msgid "Could not find command prefix %s."
msgstr ""

#: python/py-cmd.c:408
#, possible-c-format
msgid "'%s' is not a prefix command."
msgstr ""

#: python/py-cmd.c:454
msgid "Command object already initialized."
msgstr ""

#: python/py-cmd.c:477
msgid "Invalid completion type argument."
msgstr ""

#: python/py-function.c:82
msgid "No method named 'invoke' in object."
msgstr ""

#: python/py-function.c:128
msgid "This function is not documented."
msgstr ""

#: python/py-record-btrace.c:81
msgid "Must be gdb.RecordInstruction"
msgstr ""

#: python/py-record-btrace.c:90 python/py-record-btrace.c:96
#: record-btrace.c:2836
msgid "No such instruction."
msgstr ""

#: python/py-record-btrace.c:103
msgid "Not a valid instruction."
msgstr ""

#: python/py-record-btrace.c:124
msgid "Must be gdb.RecordFunctionSegment"
msgstr ""

#: python/py-record-btrace.c:133 python/py-record-btrace.c:139
msgid "No such function segment."
msgstr ""

#: python/py-record-btrace.c:146
msgid "Not a valid function segment."
msgstr ""

#: python/py-record-btrace.c:468
#, possible-c-format
msgid "Index out of range: %zd."
msgstr ""

#: python/py-record-btrace.c:500
msgid "Index must be int or slice."
msgstr ""

#: python/py-record-btrace.c:557
msgid "Not in list."
msgstr ""

#: python/py-record-btrace.c:779
msgid "Empty branch trace."
msgstr ""

#: python/py-record-btrace.c:785
msgid "Argument must be instruction."
msgstr ""

#: python/py-varobj.c:101
msgid "Invalid item from the child list"
msgstr ""

#: python/py-varobj.c:169
msgid "Null value returned for children"
msgstr ""

#: python/py-varobj.c:176
msgid "Could not get children iterator"
msgstr ""

#. Require that INFERIOR be a valid inferior ID.
#: python/py-infthread.c:34 python/py-infthread.c:91
msgid "Thread no longer exists."
msgstr ""

#: python/py-infthread.c:98
msgid "Cannot delete `name' attribute."
msgstr ""

#: python/py-infthread.c:108
msgid "The value of `name' must be a string."
msgstr ""

#: python/py-infthread.c:280
msgid "Thread handle not found."
msgstr ""

#. Require a valid symbol table.  All access to symtab_object->symtab
#. should be gated by this call.
#: python/py-symtab.c:52
msgid "Symbol Table is invalid."
msgstr ""

#. Require a valid symbol table and line object.  All access to
#. sal_object->sal should be gated by this call.
#: python/py-symtab.c:83
msgid "Symbol Table and Line is invalid."
msgstr ""

#: python/python.c:205
msgid "Python not initialized"
msgstr ""

#: python/python.c:225 python/python.c:1890
msgid "internal error: Unhandled Python exception"
msgstr ""

#: python/python.c:343
msgid "Installation error: gdb._execute_file function is missing"
msgstr ""

#: python/python.c:385
msgid "Invalid \"python\" block structure."
msgstr ""

#: python/python.c:486
msgid "Programmer error: unhandled type."
msgstr ""

#: python/python.c:515
#, possible-c-format
msgid "Could not find parameter `%s'."
msgstr ""

#: python/python.c:519
#, possible-c-format
msgid "`%s' is not a parameter."
msgstr ""

#: python/python.c:750
msgid "Number of breakpoints exceeds throttled maximum."
msgstr ""

#: python/python.c:1009
msgid "Posted event is not callable"
msgstr ""

#: python/python.c:1072
msgid "Return from prompt_hook must be either a Python string, or None"
msgstr ""

#: python/python.c:1231
msgid "Error occurred computing Python errormessage.\n"
msgstr ""

#: python/python.c:1482
msgid "Python scripting is not supported in this copy of GDB."
msgstr ""

#: python/python.c:1739
msgid ""
"Start an interactive Python prompt.\n"
"\n"
"To return to GDB, type the EOF character (e.g., Ctrl-D on an empty\n"
"prompt).\n"
"\n"
"Alternatively, a single-line Python command can be given as an\n"
"argument, and if the command is an expression, the result will be\n"
"printed.  For example:\n"
"\n"
"    (gdb) python-interactive 2 + 3\n"
"    5"
msgstr ""

#: python/python.c:1752
msgid ""
"Start a Python interactive prompt.\n"
"\n"
"Python scripting is not supported in this copy of GDB.\n"
"This command is only a placeholder."
msgstr ""

#: python/python.c:1763
msgid ""
"Evaluate a Python command.\n"
"\n"
"The command can be given as an argument, for instance:\n"
"\n"
"    python print (23)\n"
"\n"
"If no argument is given, the following lines are read and used\n"
"as the Python commands.  Type a line containing \"end\" to indicate\n"
"the end of the command."
msgstr ""

#: python/python.c:1774
msgid ""
"Evaluate a Python command.\n"
"\n"
"Python scripting is not supported in this copy of GDB.\n"
"This command is only a placeholder."
msgstr ""

#: python/python.c:1785 python/python.c:1790
msgid "Prefix command for python preference settings."
msgstr ""

#: python/python.c:1795
msgid "Set mode for Python stack dump on error."
msgstr ""

#: python/python.c:1796
msgid "Show the mode of Python stack printing on error."
msgstr ""

#. This is passed in one call to warning so that blank lines aren't
#. inserted between each line of text.
#: python/python.c:1863
#, possible-c-format
msgid ""
"\n"
"Could not load the Python gdb module from `%s'.\n"
"Limited Python support is available from the _gdb module.\n"
"Suggest passing --data-directory=/path/to/gdb/data-directory."
msgstr ""

#. Require a valid symbol.  All access to symbol_object->symbol should be
#. gated by this call.
#: python/py-symbol.c:48
msgid "Symbol is invalid."
msgstr ""

#: python/py-symbol.c:275
msgid "invalid frame"
msgstr ""

#: python/py-symbol.c:279
msgid "symbol requires a frame to compute its value"
msgstr ""

#: python/py-utils.c:55
msgid "Expected a string or unicode object."
msgstr ""

#: python/py-utils.c:281
msgid "Overflow converting to address."
msgstr ""

#. An error occurred computing the string representation of the
#. error message.  This is rare, but we should inform the user.
#: python/py-utils.c:399
msgid ""
"An error occurred in Python and then another occurred computing the error "
"message.\n"
msgstr ""

#: python/py-utils.c:420
#, possible-c-format
msgid "Error occurred in Python: %s"
msgstr ""

#: python/py-utils.c:422
msgid "Error occurred in Python."
msgstr ""

#: python/py-type.c:501
msgid "Array bound must be an integer"
msgstr ""

#: python/py-type.c:584
msgid "This type does not have a range."
msgstr ""

#: python/py-type.c:646
msgid "Type does not have a target."
msgstr ""

#: python/py-type.c:851
msgid "Null type name."
msgstr ""

#: python/py-type.c:879
msgid "Type is not a template."
msgstr ""

#: python/py-type.c:891 python/py-type.c:953
#, possible-c-format
msgid "No argument %d in template."
msgstr ""

#: python/py-type.c:919
msgid "Template argument number must be non-negative"
msgstr ""

#: python/py-type.c:964
msgid "Template argument is optimized out"
msgstr ""

#: python/py-type.c:1385
msgid "'block' argument must be a Block."
msgstr ""

#: ravenscar-thread.c:73
msgid "Ravenscar tasks."
msgstr ""

#: ravenscar-thread.c:74
msgid "Ravenscar tasks support."
msgstr ""

#: ravenscar-thread.c:542
#, possible-c-format
msgid "%s. Task/thread support disabled."
msgstr ""

#: ravenscar-thread.c:565
msgid "\"set ravenscar\" must be followed by the name of a setting.\n"
msgstr ""

#: ravenscar-thread.c:586
msgid "Support for Ravenscar task/thread switching is enabled\n"
msgstr ""

#: ravenscar-thread.c:589
msgid "Support for Ravenscar task/thread switching is disabled\n"
msgstr ""

#: ravenscar-thread.c:604
msgid "Prefix command for changing Ravenscar-specific settings."
msgstr ""

#: ravenscar-thread.c:608
msgid "Prefix command for showing Ravenscar-specific settings."
msgstr ""

#: ravenscar-thread.c:612
msgid "Enable or disable support for GNAT Ravenscar tasks."
msgstr ""

#: ravenscar-thread.c:613
msgid "Show whether support for GNAT Ravenscar tasks is enabled."
msgstr ""

#: ravenscar-thread.c:615
msgid ""
"Enable or disable support for task/thread switching with the GNAT\n"
"Ravenscar run-time library for bareboard configuration."
msgstr ""

#: record-btrace.c:48
msgid "Branch tracing target"
msgstr ""

#: record-btrace.c:49
msgid "Collect control-flow trace and provide the execution history."
msgstr ""

#: record-btrace.c:236
msgid "Internal error: bad record btrace cpu state."
msgstr ""

#: record-btrace.c:502 record-btrace.c:518
#, possible-c-format
msgid "Buffer size: %u%s.\n"
msgstr ""

#: record-btrace.c:527
#, possible-c-format
msgid "Recording format: %s.\n"
msgstr ""

#: record-btrace.c:597
#, possible-c-format
msgid ""
"Recorded %u instructions in %u functions (%u gaps) for thread %s (%s).\n"
msgstr ""

#: record-btrace.c:603
#, possible-c-format
msgid "Replay in progress.  At instruction %u.\n"
msgstr ""

#: record-btrace.c:615
msgid "["
msgstr ""

#: record-btrace.c:619
msgid "decode error ("
msgstr ""

#: record-btrace.c:621
msgid "): "
msgstr ""

#: record-btrace.c:624
msgid "]\n"
msgstr ""

#: record-btrace.c:864 record-btrace.c:990
msgid "Bad record instruction-history-size."
msgstr ""

#: record-btrace.c:924 record-btrace.c:1281
msgid "At the start of the branch trace record.\n"
msgstr ""

#: record-btrace.c:926 record-btrace.c:1283
msgid "At the end of the branch trace record.\n"
msgstr ""

#: record-btrace.c:953 record-btrace.c:956 record-btrace.c:1310
#: record-btrace.c:1313
msgid "Bad range."
msgstr ""

#: record-btrace.c:962 record-btrace.c:1319
msgid "Range out of bounds."
msgstr ""

#: record-btrace.c:1189
msgid "\tinst "
msgstr ""

#: record-btrace.c:1195
msgid "\tat "
msgstr ""

#: record-btrace.c:1218 record-btrace.c:1347
msgid "Bad record function-call-history-size."
msgstr ""

#: record-btrace.c:1560
msgid "Cannot write registers while replaying."
msgstr ""

#: record-btrace.c:1725
msgid "Registers are not available in btrace record history"
msgstr ""

#: record-btrace.c:1733
msgid "No caller in btrace record history"
msgstr ""

#: record-btrace.c:2444
msgid "invalid stepping type."
msgstr ""

#: record-btrace.c:2828
msgid "Instruction number out of range."
msgstr ""

#: record-btrace.c:2951
msgid "\"set record btrace\" must be followed by an appropriate subcommand.\n"
msgstr ""

#: record-btrace.c:2971
#, possible-c-format
msgid "Replay memory access is %s.\n"
msgstr ""

#: record-btrace.c:2981 record-btrace.c:2992 record-btrace.c:3012
#: record-btrace.c:3017 record-btrace.c:3047
#, possible-c-format
msgid "Trailing junk: '%s'."
msgstr ""

#: record-btrace.c:3022
msgid "Bad format.  See \"help set record btrace cpu\"."
msgstr ""

#: record-btrace.c:3025
msgid "Cpu family too big."
msgstr ""

#: record-btrace.c:3028
msgid "Cpu model too big."
msgstr ""

#: record-btrace.c:3031
msgid "Cpu stepping too big."
msgstr ""

#: record-btrace.c:3052
msgid "btrace cpu is 'auto'.\n"
msgstr ""

#: record-btrace.c:3056
msgid "btrace cpu is 'none'.\n"
msgstr ""

#: record-btrace.c:3064
#, possible-c-format
msgid "btrace cpu is 'intel: %u/%u'.\n"
msgstr ""

#: record-btrace.c:3068
#, possible-c-format
msgid "btrace cpu is 'intel: %u/%u/%u'.\n"
msgstr ""

#: record-btrace.c:3076
msgid "Internal error: bad cpu state."
msgstr ""

#: record-btrace.c:3084
msgid ""
"\"set record btrace bts\" must be followed by an appropriate subcommand.\n"
msgstr ""

#: record-btrace.c:3103
msgid ""
"\"set record btrace pt\" must be followed by an appropriate subcommand.\n"
msgstr ""

#: record-btrace.c:3124
#, possible-c-format
msgid "The record/replay bts buffer size is %s.\n"
msgstr ""

#: record-btrace.c:3135
#, possible-c-format
msgid "The record/replay pt buffer size is %s.\n"
msgstr ""

#: record-btrace.c:3145
msgid "Start branch trace recording."
msgstr ""

#: record-btrace.c:3150
msgid ""
"Start branch trace recording in Branch Trace Store (BTS) format.\n"
"\n"
"The processor stores a from/to record for each branch into a cyclic buffer.\n"
"This format may not be available on all processors."
msgstr ""

#: record-btrace.c:3158
msgid ""
"Start branch trace recording in Intel Processor Trace format.\n"
"\n"
"This format may not be available on all processors."
msgstr ""

#: record-btrace.c:3165 record-full.c:2834 record.c:811
msgid "Set record options."
msgstr ""

#: record-btrace.c:3169 record-full.c:2838 record.c:815
msgid "Show record options."
msgstr ""

#: record-btrace.c:3173
msgid "Set what memory accesses are allowed during replay."
msgstr ""

#: record-btrace.c:3174
msgid "Show what memory accesses are allowed during replay."
msgstr ""

#: record-btrace.c:3176
msgid ""
"Default is READ-ONLY.\n"
"\n"
"The btrace record target does not trace data.\n"
"The memory therefore corresponds to the live target and not to the current "
"replay position.\n"
"\n"
"When READ-ONLY, allow accesses to read-only memory during replay.\n"
"When READ-WRITE, allow accesses to read-only and read-write memory during "
"replay."
msgstr ""

#: record-btrace.c:3188
msgid ""
"Set the cpu to be used for trace decode.\n"
"\n"
"The format is \"VENDOR:IDENTIFIER\" or \"none\" or \"auto\" (default).\n"
"For vendor \"intel\" the format is \"FAMILY/MODEL[/STEPPING]\".\n"
"\n"
"When decoding branch trace, enable errata workarounds for the specified "
"cpu.\n"
"The default is \"auto\", which uses the cpu on which the trace was "
"recorded.\n"
"When GDB does not support that cpu, this option can be used to enable\n"
"workarounds for a similar cpu that GDB supports.\n"
"\n"
"When set to \"none\", errata workarounds are disabled."
msgstr ""

#: record-btrace.c:3201
msgid "Automatically determine the cpu to be used for trace decode."
msgstr ""

#: record-btrace.c:3205
msgid "Do not enable errata workarounds for trace decode."
msgstr ""

#: record-btrace.c:3209
msgid "Show the cpu to be used for trace decode."
msgstr ""

#: record-btrace.c:3214
msgid "Set record btrace bts options."
msgstr ""

#: record-btrace.c:3219
msgid "Show record btrace bts options."
msgstr ""

#: record-btrace.c:3225
msgid "Set the record/replay bts buffer size."
msgstr ""

#: record-btrace.c:3226
msgid "Show the record/replay bts buffer size."
msgstr ""

#: record-btrace.c:3226
msgid ""
"When starting recording request a trace buffer of this size.  The actual "
"buffer size may differ from the requested size.  Use \"info record\" to see "
"the actual buffer size.\n"
"\n"
"Bigger buffers allow longer recording but also take more time to process the "
"recorded execution trace.\n"
"\n"
"The trace buffer size may not be changed while recording."
msgstr ""

#: record-btrace.c:3238
msgid "Set record btrace pt options."
msgstr ""

#: record-btrace.c:3243
msgid "Show record btrace pt options."
msgstr ""

#: record-btrace.c:3249
msgid "Set the record/replay pt buffer size."
msgstr ""

#: record-btrace.c:3250
msgid "Show the record/replay pt buffer size."
msgstr ""

#: record-btrace.c:3250
msgid ""
"Bigger buffers allow longer recording but also take more time to process the "
"recorded execution.\n"
"The actual buffer size may differ from the requested size.  Use \"info record"
"\" to see the actual buffer size."
msgstr ""

#: record-full.c:211
msgid "Process record and replay target"
msgstr ""

#: record-full.c:213
msgid "Log program while executing and replay execution from log."
msgstr ""

#: record-full.c:690
msgid ""
"Do you want to auto delete previous execution log entries when record/replay "
"buffer becomes full (record full stop-at-limit)?"
msgstr ""

#: record-full.c:693
msgid "Process record: stopped by user."
msgstr ""

#: record-full.c:760
msgid "Process record: inferior program stopped."
msgstr ""

#: record-full.c:762 record-full.c:1545 record-full.c:1554 record-full.c:1560
msgid "Process record: failed to record execution log."
msgstr ""

#: record-full.c:867
#, possible-c-format
msgid "Process record: error writing memory at addr = %s len = %d."
msgstr ""

#: record-full.c:950
msgid "Process record: the program is not being run."
msgstr ""

#: record-full.c:952
msgid "Process record target can't debug inferior in non-stop mode (non-stop)."
msgstr ""

#: record-full.c:956
msgid ""
"Process record: the current architecture doesn't support record function."
msgstr ""

#: record-full.c:1586
msgid ""
"Because GDB is in replay mode, changing the value of a register will make "
"the execution log unusable from this point onward.  Change all registers?"
msgstr ""

#: record-full.c:1592
#, possible-c-format
msgid ""
"Because GDB is in replay mode, changing the value of a register will make "
"the execution log unusable from this point onward.  Change register %s?"
msgstr ""

#: record-full.c:1614 record-full.c:1648
msgid "Process record canceled the operation."
msgstr ""

#. Let user choose if he wants to write memory or not.
#: record-full.c:1644
#, possible-c-format
msgid ""
"Because GDB is in replay mode, writing to memory will make the execution log "
"unusable from this point onward.  Write memory at address %s?"
msgstr ""

#: record-full.c:1879 reverse.c:255
#, possible-c-format
msgid "Unbalanced quotes: %s"
msgstr ""

#: record-full.c:1908
msgid "Replay mode:\n"
msgstr ""

#: record-full.c:1910
msgid "Record mode:\n"
msgstr ""

#. Display instruction number for first instruction in the log.
#: record-full.c:1922
#, possible-c-format
msgid "Lowest recorded instruction number is %s.\n"
msgstr ""

#: record-full.c:1927
#, possible-c-format
msgid "Current instruction number is %s.\n"
msgstr ""

#. Display instruction number for last instruction in the log.
#: record-full.c:1931
#, possible-c-format
msgid "Highest recorded instruction number is %s.\n"
msgstr ""

#. Display log count.
#: record-full.c:1935
#, possible-c-format
msgid "Log contains %u instructions.\n"
msgstr ""

#: record-full.c:1939
msgid "No instructions have been logged.\n"
msgstr ""

#. Display max log size.
#: record-full.c:1942
#, possible-c-format
msgid "Max logged instructions is %u.\n"
msgstr ""

#: record-full.c:1986
msgid "Target insn not found."
msgstr ""

#: record-full.c:1988
msgid "Already at target insn."
msgstr ""

#: record-full.c:1991
#, possible-c-format
msgid "Go forward to insn number %s\n"
msgstr ""

#: record-full.c:1997
#, possible-c-format
msgid "Go backward to insn number %s\n"
msgstr ""

#: record-full.c:2122 record-full.c:2212 target.c:523
msgid "You can't do that without a process to debug."
msgstr ""

#: record-full.c:2299
#, possible-c-format
msgid "Failed to read %d bytes from core file %s ('%s')."
msgstr ""

#: record-full.c:2360
#, possible-c-format
msgid "Version mis-match or file format error in core file %s."
msgstr ""

#: record-full.c:2467
#, possible-c-format
msgid "Bad entry type in core file %s."
msgstr ""

#: record-full.c:2492
#, possible-c-format
msgid "Auto increase record/replay buffer limit to %u."
msgstr ""

#. Succeeded.
#: record-full.c:2497
#, possible-c-format
msgid "Restored records from core file %s.\n"
msgstr ""

#: record-full.c:2513
#, possible-c-format
msgid "Failed to write %d bytes to core file %s ('%s')."
msgstr ""

#: record-full.c:2599
#, possible-c-format
msgid "Failed to create 'precord' section for corefile %s: %s"
msgstr ""

#. Succeeded.
#: record-full.c:2728
#, possible-c-format
msgid "Saved core file %s with execution log.\n"
msgstr ""

#: record-full.c:2789
msgid "\"set record full\" must be followed by an appropriate subcommand.\n"
msgstr ""

#: record-full.c:2818
msgid "Start full execution recording."
msgstr ""

#: record-full.c:2822
msgid ""
"Restore the execution log from a file.\n"
"Argument is filename.  File must be created with 'record save'."
msgstr ""

#: record-full.c:2843
msgid "Set whether record/replay stops when record/replay buffer becomes full."
msgstr ""

#: record-full.c:2844
msgid ""
"Show whether record/replay stops when record/replay buffer becomes full."
msgstr ""

#: record-full.c:2846
msgid ""
"Default is ON.\n"
"When ON, if the record/replay buffer becomes full, ask user what to do.\n"
"When OFF, if the record/replay buffer becomes full,\n"
"delete the oldest recorded instruction to make room for each new one."
msgstr ""

#: record-full.c:2863
msgid "Set record/replay buffer limit."
msgstr ""

#: record-full.c:2864
msgid "Show record/replay buffer limit."
msgstr ""

#: record-full.c:2864
msgid ""
"Set the maximum number of instructions to be stored in the\n"
"record/replay buffer.  A value of either \"unlimited\" or zero means no\n"
"limit.  Default is 200000."
msgstr ""

#: record-full.c:2881
msgid ""
"Set whether query if PREC cannot record memory change of next instruction."
msgstr ""

#: record-full.c:2883
msgid ""
"Show whether query if PREC cannot record memory change of next instruction."
msgstr ""

#: record-full.c:2885
msgid ""
"Default is OFF.\n"
"When ON, query if PREC cannot record memory change of next instruction."
msgstr ""

#: record.c:77
msgid ""
"No record target is currently active.\n"
"Use one of the \"target record-<TAB><TAB>\" commands first."
msgstr ""

#: record.c:90
msgid ""
"The process is already being recorded.  Use \"record stop\" to stop "
"recording first."
msgstr ""

#: record.c:104 record.c:111 record.c:122
msgid "Invalid format."
msgstr ""

#: record.c:125
msgid "Invalid method."
msgstr ""

#: record.c:260
#, possible-c-format
msgid "Debugging of process record target is %s.\n"
msgstr ""

#: record.c:282
msgid "Already at end of record list.\n"
msgstr ""

#: record.c:288
msgid "The current record target does not support this operation.\n"
msgstr ""

#: record.c:293
msgid ""
"Delete the log from this point forward and begin to record the running "
"message at current PC?"
msgstr ""

#: record.c:311
msgid "Process record is stopped and all execution logs are deleted.\n"
msgstr ""

#: record.c:322
msgid "\"set record\" must be followed by an appropriate subcommand.\n"
msgstr ""

#: record.c:345
msgid "No record target is currently active.\n"
msgstr ""

#: record.c:349
#, possible-c-format
msgid "Active record target: %s\n"
msgstr ""

#: record.c:384
msgid "Command requires an argument (insn number to go to)."
msgstr ""

#: record.c:521 record.c:654
#, possible-c-format
msgid "Invalid modifier: %c."
msgstr ""

#: record.c:744
#, possible-c-format
msgid "integer %u out of range"
msgstr ""

#: record.c:781
msgid "Set debugging of record/replay feature."
msgstr ""

#: record.c:782
msgid "Show debugging of record/replay feature."
msgstr ""

#: record.c:783
msgid "When enabled, debugging output for record/replay feature is displayed."
msgstr ""

#: record.c:789
msgid "Set number of instructions to print in \"record instruction-history\"."
msgstr ""

#: record.c:790
msgid "Show number of instructions to print in \"record instruction-history\"."
msgstr ""

#: record.c:791
msgid ""
"A size of \"unlimited\" means unlimited instructions.  The default is 10."
msgstr ""

#: record.c:797
msgid "Set number of function to print in \"record function-call-history\"."
msgstr ""

#: record.c:798
msgid "Show number of functions to print in \"record function-call-history\"."
msgstr ""

#: record.c:799
msgid "A size of \"unlimited\" means unlimited lines.  The default is 10."
msgstr ""

#: record.c:805
msgid "Start recording."
msgstr ""

#: record.c:819
msgid "Info record options."
msgstr ""

#: record.c:824
msgid ""
"Save the execution log to a file.\n"
"Usage: record save [FILENAME]\n"
"Default filename is 'gdb_record.PROCESS_ID'."
msgstr ""

#: record.c:831
msgid "Delete the rest of execution log and start recording it anew."
msgstr ""

#: record.c:837
msgid "Stop the record/replay target."
msgstr ""

#: record.c:841
msgid ""
"Restore the program to its state at instruction number N.\n"
"Argument is instruction number, as shown by 'info record'."
msgstr ""

#: record.c:847
msgid "Go to the beginning of the execution log."
msgstr ""

#: record.c:852
msgid "Go to the end of the execution log."
msgstr ""

#: record.c:855
msgid ""
"Print disassembled instructions stored in the execution log.\n"
"With a /m or /s modifier, source lines are included (if available).\n"
"With a /r modifier, raw instructions in hex are included.\n"
"With a /f modifier, function names are omitted.\n"
"With a /p modifier, current position markers are omitted.\n"
"With no argument, disassembles ten more instructions after the previous "
"disassembly.\n"
"\"record instruction-history -\" disassembles ten instructions before a "
"previous disassembly.\n"
"One argument specifies an instruction number as shown by 'info record', and "
"ten instructions are disassembled after that instruction.\n"
"Two arguments with comma between them specify starting and ending "
"instruction numbers to disassemble.\n"
"If the second argument is preceded by '+' or '-', it specifies the distance "
"from the first argument.\n"
"The number of instructions to disassemble can be defined with \"set record "
"instruction-history-size\"."
msgstr ""

#: record.c:875
msgid ""
"Prints the execution history at function granularity.\n"
"It prints one line for each sequence of instructions that belong to the same "
"function.\n"
"Without modifiers, it prints the function name.\n"
"With a /l modifier, the source file and line number range is included.\n"
"With a /i modifier, the instruction number range is included.\n"
"With a /c modifier, the output is indented based on the call stack depth.\n"
"With no argument, prints ten more lines after the previous ten-line print.\n"
"\"record function-call-history -\" prints ten lines before a previous ten-"
"line print.\n"
"One argument specifies a function number as shown by 'info record', and ten "
"lines are printed after that function.\n"
"Two arguments with comma between them specify a range of functions to "
"print.\n"
"If the second argument is preceded by '+' or '-', it specifies the distance "
"from the first argument.\n"
"The number of functions to print can be defined with \"set record function-"
"call-history-size\"."
msgstr ""

#: regcache-dump.c:312
msgid ""
"Print the internal register configuration.\n"
"Takes an optional file parameter."
msgstr ""

#: regcache-dump.c:316
msgid ""
"Print the internal register configuration including raw values.\n"
"Takes an optional file parameter."
msgstr ""

#: regcache-dump.c:321
msgid ""
"Print the internal register configuration including cooked values.\n"
"Takes an optional file parameter."
msgstr ""

#: regcache-dump.c:326
msgid ""
"Print the internal register configuration including each register's group.\n"
"Takes an optional file parameter."
msgstr ""

#: regcache-dump.c:331
msgid ""
"Print the internal register configuration including remote register number "
"and g/G packets offset.\n"
"Takes an optional file parameter."
msgstr ""

#: regcache.c:1185
msgid "PC register is not available"
msgstr ""

#: regcache.c:1191
msgid "regcache_read_pc: Unable to find PC"
msgstr ""

#: regcache.c:1207
msgid "regcache_write_pc: Unable to update PC"
msgstr ""

#: regcache.c:1261
msgid "Register cache flushed.\n"
msgstr ""

#: regcache.c:1810
msgid "Force gdb to flush its register cache (maintainer command)."
msgstr ""

#: reggroups.c:302
msgid "maintenance print reggroups"
msgstr ""

#: reggroups.c:339
msgid ""
"Print the internal register group names.\n"
"Takes an optional file parameter."
msgstr ""

#: remote-fileio.c:1282
msgid "Illegal argument for \"set remote system-call-allowed\" command"
msgstr ""

#: remote-fileio.c:1289
#, possible-c-format
msgid "Garbage after \"show remote system-call-allowed\" command: `%s'"
msgstr ""

#: remote-fileio.c:1301
msgid "Set if the host system(3) call is allowed for the target."
msgstr ""

#: remote-fileio.c:1305
msgid "Show if the host system(3) call is allowed for the target."
msgstr ""

#: remote-notif.c:244
msgid "Set debugging of async remote notification."
msgstr ""

#: remote-notif.c:245
msgid "Show debugging of async remote notification."
msgstr ""

#: remote-notif.c:246
msgid ""
"When non-zero, debugging output about async remote notifications is enabled."
msgstr ""

#: remote-sim.c:79
msgid "simulator"
msgstr ""

#: remote-sim.c:80
msgid "Use the compiled-in simulator."
msgstr ""

#: remote-sim.c:225
#, possible-c-format
msgid "Unable to create simulator instance for inferior %d."
msgstr ""

#: remote-sim.c:240
#, possible-c-format
msgid ""
"Inferior %d and inferior %d would have identical simulator state.\n"
"(This simulator does not support the running of more than one inferior.)"
msgstr ""

#: remote-sim.c:537
msgid "Register size different to expected"
msgstr ""

#: remote-sim.c:540
#, possible-c-format
msgid "Register %d not updated"
msgstr ""

#: remote-sim.c:542
#, possible-c-format
msgid "Register %s not updated"
msgstr ""

#: remote-sim.c:580
msgid "program to load"
msgstr ""

#: remote-sim.c:587
msgid "GDB sim does not yet support a load offset."
msgstr ""

#: remote-sim.c:596
msgid "unable to load program"
msgstr ""

#: remote-sim.c:627 remote-sim.c:1066
msgid "No program loaded."
msgstr ""

#: remote-sim.c:655
msgid "Unable to create sim inferior."
msgstr ""

#: remote-sim.c:747
msgid "unable to create simulator instance"
msgstr ""

#: remote-sim.c:862
#, possible-c-format
msgid "gdbsim_resume: pid %d, step %d, signal %d\n"
msgstr ""

#: remote-sim.c:974
#, possible-c-format
msgid "Unable to wait for pid %d.  Inferior not found."
msgstr ""

#. PREVIOUSLY: The user may give a command before the simulator
#. is opened. [...] (??? assuming of course one wishes to
#. continue to allow commands to be sent to unopened simulators,
#. which isn't entirely unreasonable).
#. The simulator is a builtin abstraction of a remote target.
#. Consistent with that model, access to the simulator, via sim
#. commands, is restricted to the period when the channel to the
#. simulator is open.
#: remote-sim.c:1192
msgid "Not connected to the simulator target"
msgstr ""

#: remote-sim.c:1305
msgid "Send a command to the simulator."
msgstr ""

#. The remote target.
#: remote.c:83
msgid ""
"Use a remote computer via a serial line, using a gdb-specific protocol.\n"
"Specify the serial device it is connected to\n"
"(e.g. /dev/ttyS0, /dev/ttya, COM1, etc.)."
msgstr ""

#: remote.c:393
msgid "Remote serial target in gdb-specific protocol"
msgstr ""

#: remote.c:943
msgid "Extended remote serial target in gdb-specific protocol"
msgstr ""

#. malformed packet error
#. general case:
#: remote.c:1104
msgid "remote.c: error in outgoing packet."
msgstr ""

#: remote.c:1106
#, possible-c-format
msgid "remote.c: error in outgoing packet at field #%ld."
msgstr ""

#: remote.c:1109
#, possible-c-format
msgid "Target returns error code '%s'."
msgstr ""

#: remote.c:1140
#, possible-c-format
msgid "invalid qRelocInsn packet: %s"
msgstr ""

#: remote.c:1169
msgid "warning: relocating instruction: "
msgstr ""

#: remote.c:1454
msgid ""
"Send the ASCII ETX character (Ctrl-c) to the remote target to interrupt the "
"execution of the program.\n"
msgstr ""

#: remote.c:1459
msgid ""
"send a break signal to the remote target to interrupt the execution of the "
"program.\n"
msgstr ""

#: remote.c:1463
msgid ""
"Send a break signal and 'g' a.k.a. Magic SysRq g to the remote target to "
"interrupt the execution of Linux kernel.\n"
msgstr ""

#: remote.c:1468 remote.c:4219
#, possible-c-format
msgid "Invalid value for interrupt_sequence_mode: %s."
msgstr ""

#: remote.c:1599
msgid "Argument required (integer, `fixed' or `limited')."
msgstr ""

#: remote.c:1612
#, possible-c-format
msgid "Invalid %s (bad syntax)."
msgstr ""

#: remote.c:1627
#, possible-c-format
msgid ""
"The target may not be able to correctly handle a %s\n"
"of %ld bytes. Change the packet size? "
msgstr ""

#: remote.c:1630
msgid "Packet size not changed."
msgstr ""

#: remote.c:1641
#, possible-c-format
msgid "The %s is 0 (default). "
msgstr ""

#: remote.c:1643
#, possible-c-format
msgid "The %s is %ld. "
msgstr ""

#: remote.c:1645
#, possible-c-format
msgid "Packets are fixed at %ld bytes.\n"
msgstr ""

#: remote.c:1652
#, possible-c-format
msgid "Packets are limited to %ld bytes.\n"
msgstr ""

#: remote.c:1684
#, possible-c-format
msgid "The maximum number of target hardware watchpoints is %s.\n"
msgstr ""

#: remote.c:1695
#, possible-c-format
msgid "The maximum length (in bytes) of a target hardware watchpoint is %s.\n"
msgstr ""

#: remote.c:1706
#, possible-c-format
msgid "The maximum number of target hardware breakpoints is %s.\n"
msgstr ""

#: remote.c:1723
#, possible-c-format
msgid "Number of remote packet characters to display is %s.\n"
msgstr ""

#: remote.c:1804
#, possible-c-format
msgid "Support for the `%s' packet is auto-detected, currently %s.\n"
msgstr ""

#: remote.c:1810
#, possible-c-format
msgid "Support for the `%s' packet is currently %s.\n"
msgstr ""

#: remote.c:1895
msgid "packet_ok: attempt to use a disabled packet"
msgstr ""

#. If the stub previously indicated that the packet was
#. supported then there is a protocol error.
#: remote.c:1919
#, possible-c-format
msgid "Protocol error: %s (%s) conflicting enabled responses."
msgstr ""

#. The user set it wrong.
#: remote.c:1925
#, possible-c-format
msgid "Enabled packet %s (%s) not recognized by stub"
msgstr ""

#: remote.c:2148
#, possible-c-format
msgid "Could not find config for %s"
msgstr ""

#. Error of some sort.
#. We're out of sync with the target now.  Did it continue
#. or not?  We can't tell which thread it was in non-stop,
#. so just ignore this.
#: remote.c:2320 remote.c:3930 remote.c:3955 remote.c:4067 remote.c:5279
#: remote.c:7666 remote.c:7764 remote.c:10530 remote.c:14110
#, possible-c-format
msgid "Remote failure reply: %s"
msgstr ""

#: remote.c:2960
#, possible-c-format
msgid "invalid remote ptid: %s"
msgstr ""

#: remote.c:3243
msgid "Incomplete response to threadinfo request."
msgstr ""

#. This is an answer to a different request.
#: remote.c:3246
msgid "ERROR RMT Thread info mismatch."
msgstr ""

#: remote.c:3260
msgid "ERROR RMT: threadinfo tag mismatch."
msgstr ""

#: remote.c:3268
msgid "ERROR RMT: length of threadid is not 16."
msgstr ""

#: remote.c:3283
msgid "ERROR RMT: 'exists' length too long."
msgstr ""

#: remote.c:3307
msgid "ERROR RMT: unknown thread info tag."
msgstr ""

#. FIXME: This is a good reason to drop the packet.
#. Possibly, there is a duplicate response.
#. Possibilities :
#. retransmit immediatly - race conditions
#. retransmit after timeout - yes
#. exit
#. wait for packet, then exit
#.
#: remote.c:3419
msgid "HMM: threadlist did not echo arg thread, dropping it."
msgstr ""

#: remote.c:3426
msgid "RMT ERROR : failed to get remote thread list."
msgstr ""

#: remote.c:3434
msgid "RMT ERROR: threadlist response longer than requested."
msgstr ""

#: remote.c:3462
msgid "Remote fetch threadlist -infinite loop-."
msgstr ""

#: remote.c:3697
msgid "threads"
msgstr ""

#: remote.c:3846
msgid "remote_threads_extra_info"
msgstr ""

#: remote.c:4102 remote.c:4129
#, possible-c-format
msgid "Target reported unsupported offsets: %s"
msgstr ""

#: remote.c:4127
#, possible-c-format
msgid "Malformed response to offset query, %s"
msgstr ""

#: remote.c:4175
msgid "Can not handle qOffsets TextSeg response with this symbol file"
msgstr ""

#: remote.c:4554
#, possible-c-format
msgid "Remote replied unexpectedly to '%s': %s"
msgstr ""

#: remote.c:4607
msgid "Non-stop mode requested, but remote does not support non-stop"
msgstr ""

#: remote.c:4614
#, possible-c-format
msgid "Remote refused setting non-stop mode with: %s"
msgstr ""

#: remote.c:4631
#, possible-c-format
msgid "Remote refused setting all-stop mode with: %s"
msgstr ""

#: remote.c:4655 remote.c:4764
msgid "The target is not running (try extended-remote?)"
msgstr ""

#: remote.c:4801
msgid "Trace is already running on the target.\n"
msgstr ""

#: remote.c:4944
msgid ""
"The remote protocol may be unreliable over UDP.\n"
"Some events may be lost, rendering further debugging impossible."
msgstr ""

#: remote.c:4980
#, possible-c-format
msgid "Remote refused setting permissions with: %s"
msgstr ""

#: remote.c:5019
#, possible-c-format
msgid "Remote qSupported response supplied an unexpected value for \"%s\"."
msgstr ""

#: remote.c:5041
#, possible-c-format
msgid "Remote target reported \"%s\" without a size."
msgstr ""

#: remote.c:5050
#, possible-c-format
msgid "Remote target reported \"%s\" with a bad size: \"%s\"."
msgstr ""

#: remote.c:5309
msgid "empty item in \"qSupported\" response"
msgstr ""

#: remote.c:5340
#, possible-c-format
msgid "unrecognized item \"%s\" in \"qSupported\" response"
msgstr ""

#: remote.c:5413
msgid ""
"The target is not responding to GDB commands.\n"
"Stop debugging it? "
msgstr ""

#: remote.c:5452 remote.c:6744
msgid "Disconnected from target."
msgstr ""

#: remote.c:5461
msgid ""
"To open a remote debug connection, you need to specify what\n"
"serial device is attached to the remote system\n"
"(e.g. /dev/ttyS0, /dev/ttya, COM1, etc.)."
msgstr ""

#: remote.c:5471
msgid "Already connected to a remote target.  Disconnect? "
msgstr ""

#: remote.c:5472
msgid "Still connected."
msgstr ""

#: remote.c:5634
msgid "Remote doesn't know how to detach"
msgstr ""

#: remote.c:5636
msgid "Can't detach process."
msgstr ""

#: remote.c:5653
msgid "No process to detach from."
msgstr ""

#: remote.c:5662
msgid "Ending remote debugging.\n"
msgstr ""

#: remote.c:5763
msgid "Argument given to \"disconnect\" when remotely debugging."
msgstr ""

#: remote.c:5791 remote.c:5825
msgid "This target does not support attaching to a process"
msgstr ""

#: remote.c:5820
#, possible-c-format
msgid "Attaching to %s failed with: %s"
msgstr ""

#: remote.c:5827
#, possible-c-format
msgid "Attaching to %s failed"
msgstr ""

#: remote.c:6106
#, possible-c-format
msgid " - Can't pass signal %d to target in reverse: ignored."
msgstr ""

#: remote.c:6110
msgid "Remote reverse-step not supported."
msgstr ""

#: remote.c:6112
msgid "Remote reverse-continue not supported."
msgstr ""

#: remote.c:6209 remote.c:6362
#, possible-c-format
msgid "Unexpected vCont reply in non-stop mode: %s"
msgstr ""

#: remote.c:6590
msgid "Remote server does not support stopping threads"
msgstr ""

#: remote.c:6623
#, possible-c-format
msgid "Stopping %s failed: %s"
msgstr ""

#: remote.c:6672
msgid "No support for interrupting the remote target."
msgstr ""

#: remote.c:6674
#, possible-c-format
msgid "Interrupting target failed: %s"
msgstr ""

#: remote.c:6740
msgid ""
"The target is not responding to interrupt requests.\n"
"Stop debugging it? "
msgstr ""

#: remote.c:6749
msgid ""
"Interrupted while waiting for the program.\n"
"Give up waiting? "
msgstr ""

#. We got an unknown stop reply.
#: remote.c:6850
msgid "Unknown stop reply"
msgstr ""

#: remote.c:7187
#, possible-c-format
msgid ""
"Malformed packet(a) (missing colon): %s\n"
"Packet: '%s'\n"
msgstr ""

#: remote.c:7191
#, possible-c-format
msgid ""
"Malformed packet(a) (missing register number): %s\n"
"Packet: '%s'\n"
msgstr ""

#: remote.c:7235
msgid "Unexpected swbreak stop reason"
msgstr ""

#: remote.c:7249
msgid "Unexpected hwbreak stop reason"
msgstr ""

#: remote.c:7386
#, possible-c-format
msgid ""
"Remote sent bad register number %s: %s\n"
"Packet: '%s'\n"
msgstr ""

#: remote.c:7399
#, possible-c-format
msgid "Remote reply is too short: %s"
msgstr ""

#: remote.c:7412
#, possible-c-format
msgid ""
"Remote register badly formatted: %s\n"
"here: %s"
msgstr ""

#: remote.c:7441
#, possible-c-format
msgid "stop reply packet badly formatted: %s"
msgstr ""

#: remote.c:7491 remote.c:7494
#, possible-c-format
msgid "unknown stop reply packet: %s"
msgstr ""

#: remote.c:7505
#, possible-c-format
msgid "No process or thread specified in stop reply: %s"
msgstr ""

#: remote.c:7672 remote.c:7814
#, possible-c-format
msgid "Invalid remote reply: %s"
msgstr ""

#: remote.c:7904
#, possible-c-format
msgid "Could not fetch register \"%s\"; remote failure reply '%s'"
msgstr ""

#: remote.c:7923
msgid "fetch_register_using_p: early buf termination"
msgstr ""

#: remote.c:7944
#, possible-c-format
msgid "Could not read registers; remote failure reply '%s'"
msgstr ""

#: remote.c:7965
#, possible-c-format
msgid "Remote 'g' packet reply is of odd length: %s"
msgstr ""

#: remote.c:7984
#, possible-c-format
msgid ""
"Remote 'g' packet reply is too long (expected %ld bytes, got %d bytes): %s"
msgstr ""

#: remote.c:8014
#, possible-c-format
msgid "Truncated register %d in remote 'g' packet"
msgstr ""

#: remote.c:8043 remote.c:8062
msgid "unexpected end of 'g' packet reply"
msgstr ""

#: remote.c:8103
msgid "could not set remote traceframe"
msgstr ""

#: remote.c:8212
#, possible-c-format
msgid "Could not write register \"%s\"; remote failure reply '%s'"
msgstr ""

#: remote.c:8217 remote.c:9765
msgid "Bad result from packet_ok"
msgstr ""

#: remote.c:8256
#, possible-c-format
msgid "Could not write registers; remote failure reply '%s'"
msgstr ""

#: remote.c:8495
msgid "remote_write_bytes_aux: bad packet format"
msgstr ""

#: remote.c:8545
msgid "minimum packet size too small to write data"
msgstr ""

#: remote.c:8661
msgid "remote_write_bytes: bad internal state"
msgstr ""

#: remote.c:8864
msgid "Too long remote packet."
msgstr ""

#: remote.c:8867 remote.c:11158
msgid "Communication problem with target."
msgstr ""

#: remote.c:8894
msgid "Remote target does not support flash erase"
msgstr ""

#: remote.c:8896
msgid "Error erasing flash with vFlashErase packet"
msgstr ""

#: remote.c:8926
msgid "Remote target does not support vFlashDone"
msgstr ""

#: remote.c:8928
msgid "Error finishing flash operation"
msgstr ""

#: remote.c:8991
msgid "Remote connection closed"
msgstr ""

#: remote.c:8994 remote.c:9023
msgid "Remote communication error.  Target disconnected."
msgstr ""

#: remote.c:9099
msgid ""
"Cannot execute this command while the target is running.\n"
"Use the \"interrupt\" command to stop the target\n"
"and then try again."
msgstr ""

#: remote.c:9431
#, possible-c-format
msgid "Invalid run length encoding: %s\n"
msgstr ""

#: remote.c:9460
#, possible-c-format
msgid "Watchdog timer is %s.\n"
msgstr ""

#: remote.c:9549
msgid "Watchdog timeout has expired.  Target detached."
msgstr ""

#. We have tried hard enough, and just can't receive the
#. packet/notification.  Give up.
#: remote.c:9571
msgid "Ignoring packet error, continuing...\n"
msgstr ""

#: remote.c:9675 remote.c:9690
#, possible-c-format
msgid "Can't kill fork child process %d"
msgstr ""

#: remote.c:9737
msgid "Can't kill process"
msgstr ""

#: remote.c:9889
msgid "Target does not support QDisableRandomization."
msgstr ""

#: remote.c:9891
#, possible-c-format
msgid "Bogus QDisableRandomization reply from target: %s"
msgstr ""

#: remote.c:9910
msgid "Remote file name too long for run packet"
msgstr ""

#: remote.c:9922
msgid "Argument list too long for run packet"
msgstr ""

#: remote.c:9943
msgid ""
"Running the default executable on the remote target failed; try \"set remote "
"exec-file\"?"
msgstr ""

#: remote.c:9946
#, possible-c-format
msgid "Running \"%s\" on the remote target failed"
msgstr ""

#: remote.c:9976
#, possible-c-format
msgid "Unable to %s environment variable '%s' on remote."
msgstr ""

#: remote.c:9992
msgid "Unable to reset environment on remote."
msgstr ""

#: remote.c:10039
#, possible-c-format
msgid ""
"Remote replied unexpectedly while setting the inferior's working\n"
"directory: %s"
msgstr ""

#: remote.c:10081
#, possible-c-format
msgid "Remote replied unexpectedly while setting startup-with-shell: %s"
msgstr ""

#: remote.c:10097
msgid "Remote target does not support \"set remote exec-file\""
msgstr ""

#: remote.c:10099
msgid "Remote target does not support \"set args\" or run ARGS"
msgstr ""

#: remote.c:10225
msgid "Target doesn't support breakpoints that have target side commands."
msgstr ""

#: remote.c:10282
#, possible-c-format
msgid "hw_bp_to_z: bad watchpoint type %d"
msgstr ""

#: remote.c:10322
msgid "remote_insert_watchpoint: reached end of function"
msgstr ""

#: remote.c:10369
msgid "remote_remove_watchpoint: reached end of function"
msgstr ""

#: remote.c:10539
msgid "remote_insert_hw_breakpoint: reached end of function"
msgstr ""

#: remote.c:10580
msgid "remote_remove_hw_breakpoint: reached end of function"
msgstr ""

#: remote.c:10647
msgid "command cannot be used without an exec file"
msgstr ""

#: remote.c:10680
#, possible-c-format
msgid "target memory fault, section %s, range %s -- %s"
msgstr ""

#: remote.c:10696
msgid ""
"One or more sections of the target image does not match\n"
"the loaded file\n"
msgstr ""

#: remote.c:10699
#, possible-c-format
msgid "No loaded section named '%s'.\n"
msgstr ""

#: remote.c:10802
#, possible-c-format
msgid "Unknown remote qXfer reply: %s"
msgstr ""

#: remote.c:10808
msgid "Remote qXfer reply contained no data."
msgstr ""

#: remote.c:10997
msgid "remote query is only available after target open"
msgstr ""

#: remote.c:11101
msgid "Pattern is too large to transmit to remote target."
msgstr ""

#: remote.c:11123 remote.c:11128
#, possible-c-format
msgid "Unknown qSearch:memory reply: %s"
msgstr ""

#: remote.c:11140
msgid "remote rcmd is only available after target open"
msgstr ""

#: remote.c:11152
#, possible-c-format
msgid "\"monitor\" command ``%s'' is too long."
msgstr ""

#: remote.c:11179 remote.c:12691 remote.c:13010 remote.c:13107 remote.c:13217
#: remote.c:13267 remote.c:13345 remote.c:13408 remote.c:13438
msgid "Target does not support this command."
msgstr ""

#: remote.c:11190
msgid "Protocol error with Rcmd"
msgstr ""

#: remote.c:11221 remote.c:12389 remote.c:12481 remote.c:12540
msgid "command can only be used with remote target"
msgstr ""

#: remote.c:11230
msgid "remote-packet command requires packet text as argument"
msgstr ""

#: remote.c:11273
msgid "Remote threadset test\n"
msgstr ""

#: remote.c:11379
msgid "Fetch and print the remote list of thread identifiers, one pkt only."
msgstr ""

#: remote.c:11382
msgid "Fetch and display info about one thread."
msgstr ""

#: remote.c:11384
msgid "Test setting to a different thread."
msgstr ""

#: remote.c:11386
msgid "Iterate through updating all remote thread info."
msgstr ""

#: remote.c:11388
msgid "Remote thread alive test."
msgstr ""

#: remote.c:11471
msgid "Remote target doesn't support qGetTLSAddr packet"
msgstr ""

#: remote.c:11474
msgid "Remote target failed to process qGetTLSAddr request"
msgstr ""

#: remote.c:11478
msgid "TLS not supported or disabled on this target"
msgstr ""

#: remote.c:11514
msgid "Remote target doesn't support qGetTIBAddr packet"
msgstr ""

#: remote.c:11516
msgid "Remote target failed to process qGetTIBAddr request"
msgstr ""

#: remote.c:11519
msgid "qGetTIBAddr not supported or disabled on this target"
msgstr ""

#: remote.c:11568
#, possible-c-format
msgid "Duplicate g packet description added for size %d"
msgstr ""

#: remote.c:11628 remote.c:11649 remote.c:11671
msgid "Packet too long for target."
msgstr ""

#: remote.c:11882
#, possible-c-format
msgid "Reading %s from remote target...\n"
msgstr ""

#: remote.c:11887
msgid ""
"File transfers from remote targets can be slow. Use \"set sysroot\" to "
"access files locally instead."
msgstr ""

#: remote.c:11991
#, possible-c-format
msgid "Read returned %d, but %d bytes."
msgstr ""

#: remote.c:12155
#, possible-c-format
msgid "Readlink returned %d, but %d bytes."
msgstr ""

#: remote.c:12207
#, possible-c-format
msgid "vFile:fstat returned %d, but %d bytes."
msgstr ""

#: remote.c:12210
#, possible-c-format
msgid "vFile:fstat returned %d bytes, but expecting %d."
msgstr ""

#: remote.c:12256
msgid ""
"remote target does not support file transfer, attempting to access files "
"from local filesystem."
msgstr ""

#: remote.c:12326
#, possible-c-format
msgid "Unknown remote I/O error %d"
msgstr ""

#: remote.c:12328
#, possible-c-format
msgid "Remote I/O error: %s"
msgstr ""

#: remote.c:12433
#, possible-c-format
msgid "Error reading %s."
msgstr ""

#: remote.c:12456
#, possible-c-format
msgid "Remote write of %d bytes returned 0!"
msgstr ""

#: remote.c:12472
#, possible-c-format
msgid "Successfully sent file \"%s\".\n"
msgstr ""

#: remote.c:12531
#, possible-c-format
msgid "Successfully fetched file \"%s\".\n"
msgstr ""

#: remote.c:12555
#, possible-c-format
msgid "Successfully deleted file \"%s\".\n"
msgstr ""

#: remote.c:12562
msgid "file to put"
msgstr ""

#: remote.c:12566
msgid "Invalid parameters to remote put"
msgstr ""

#: remote.c:12575
msgid "file to get"
msgstr ""

#: remote.c:12579
msgid "Invalid parameters to remote get"
msgstr ""

#: remote.c:12588
msgid "file to delete"
msgstr ""

#: remote.c:12592
msgid "Invalid parameters to remote delete"
msgstr ""

#: remote.c:12714 remote.c:12729 remote.c:12941 remote.c:12957
msgid "Target does not support source download."
msgstr ""

#: remote.c:12746
msgid "Tracepoint packet too large for target."
msgstr ""

#: remote.c:12790
msgid "Fast tracepoint not valid during download"
msgstr ""

#. Fast tracepoints are functionally identical to regular
#. tracepoints, so don't take lack of support as a reason to
#. give up on the trace run.
#: remote.c:12797
#, possible-c-format
msgid ""
"Target does not support fast tracepoints, downloading %d as regular "
"tracepoint"
msgstr ""

#: remote.c:12818
msgid "Static tracepoint not valid during download"
msgstr ""

#. Fast tracepoints are functionally identical to regular
#. tracepoints, so don't take lack of support as a reason
#. to give up on the trace run.
#: remote.c:12824
msgid "Target does not support static tracepoints"
msgstr ""

#: remote.c:12859
#, possible-c-format
msgid "Target does not support conditional tracepoints, ignoring tp %d cond"
msgstr ""

#: remote.c:12877
msgid "Target does not support tracepoints."
msgstr ""

#: remote.c:12899 remote.c:12922
msgid "Error on target while setting tracepoints."
msgstr ""

#: remote.c:13004
msgid "Trace state variable name too long for tsv definition packet"
msgstr ""

#: remote.c:13012
msgid "Error on target while downloading trace state variable."
msgstr ""

#: remote.c:13027
msgid ""
"Target does not support enabling tracepoints while a trace run is ongoing."
msgstr ""

#: remote.c:13029
msgid "Error on target while enabling tracepoint."
msgstr ""

#: remote.c:13044
msgid ""
"Target does not support disabling tracepoints while a trace run is ongoing."
msgstr ""

#: remote.c:13046
msgid "Error on target while disabling tracepoint."
msgstr ""

#: remote.c:13084
msgid "Too many sections for read-only sections definition packet."
msgstr ""

#: remote.c:13109 remote.c:13219 remote.c:13292 remote.c:13295 remote.c:13347
#: remote.c:13410 remote.c:13440 remote.c:13516 remote.c:13561
#, possible-c-format
msgid "Bogus reply from target: %s"
msgstr ""

#: remote.c:13153
#, possible-c-format
msgid "Bogus trace status reply from target: %s"
msgstr ""

#: remote.c:13261
#, possible-c-format
msgid "Unknown trace find type %d"
msgstr ""

#: remote.c:13276
msgid "Unable to parse trace frame number"
msgstr ""

#: remote.c:13286
msgid "Unable to parse tracepoint number"
msgstr ""

#: remote.c:13339
msgid "Remote file name too long for trace save packet"
msgstr ""

#: remote.c:13413
msgid "Target does not support disconnected tracing."
msgstr ""

#: remote.c:13638
#, possible-c-format
msgid "Failed to configure the BTS buffer size: %s"
msgstr ""

#: remote.c:13640
msgid "Failed to configure the BTS buffer size."
msgstr ""

#: remote.c:13660
#, possible-c-format
msgid "Failed to configure the trace buffer size: %s"
msgstr ""

#: remote.c:13662
msgid "Failed to configure the trace buffer size."
msgstr ""

#: remote.c:13715
msgid ""
"Target is recording using Intel Processor Trace but support was disabled at "
"compile time."
msgstr ""

#: remote.c:13730
#, possible-c-format
msgid "Target is recording using %s.\n"
msgstr ""

#: remote.c:13776 x86-linux-nat.c:226
#, possible-c-format
msgid "Could not enable branch tracing for %s: %s"
msgstr ""

#: remote.c:13779
#, possible-c-format
msgid "Could not enable branch tracing for %s."
msgstr ""

#: remote.c:13823
#, possible-c-format
msgid "Could not disable branch tracing for %s: %s"
msgstr ""

#: remote.c:13826
#, possible-c-format
msgid "Could not disable branch tracing for %s."
msgstr ""

#: remote.c:13856
msgid "Cannot process branch tracing result. XML parsing not supported."
msgstr ""

#: remote.c:13872
#, possible-c-format
msgid "Bad branch tracing read type: %u."
msgstr ""

#: remote.c:13924
#, possible-c-format
msgid "not currently attached to process %d"
msgstr ""

#: remote.c:13989
#, possible-c-format
msgid "Thread handle size mismatch: %d vs %zu (from remote)"
msgstr ""

#: remote.c:14107
#, possible-c-format
msgid "Remote refused setting thread events: %s"
msgstr ""

#: remote.c:14218
#, possible-c-format
msgid "Debugger's willingness to use range stepping is %s.\n"
msgstr ""

#: remote.c:14248
msgid "Range stepping is not supported by the current target"
msgstr ""

#. set/show remote ...
#. allow-unknown
#: remote.c:14274 remote.c:14280
msgid ""
"Remote protocol specific variables.\n"
"Configure various remote-protocol specific variables such as\n"
"the packets being used."
msgstr ""

#. allow-unknown
#: remote.c:14287
msgid ""
"Compare section data on target to the exec file.\n"
"Argument is a single section name (default: all loaded sections).\n"
"To compare only read-only loaded sections, specify the -r option."
msgstr ""

#: remote.c:14293
msgid ""
"Send an arbitrary packet to a remote target.\n"
"   maintenance packet TEXT\n"
"If GDB is talking to an inferior via the GDB serial protocol, then\n"
"this command sends the string TEXT to the inferior, and displays the\n"
"response packet.  GDB supplies the initial `$' character, and the\n"
"terminating `#' character and checksum."
msgstr ""

#: remote.c:14302
msgid "Set whether to send break if interrupted."
msgstr ""

#: remote.c:14303
msgid "Show whether to send break if interrupted."
msgstr ""

#: remote.c:14304
msgid "If set, a break, instead of a cntrl-c, is sent to the remote target."
msgstr ""

#: remote.c:14317
msgid "Set interrupt sequence to remote target."
msgstr ""

#: remote.c:14318
msgid "Show interrupt sequence to remote target."
msgstr ""

#: remote.c:14319
msgid ""
"Valid value is \"Ctrl-C\", \"BREAK\" or \"BREAK-g\". The default is \"Ctrl-C"
"\"."
msgstr ""

#: remote.c:14326
msgid ""
"Set whether interrupt-sequence is sent to remote target when gdb connects to."
msgstr ""

#: remote.c:14327
msgid ""
"Show whether interrupt-sequence is sent to remote target when gdb connects "
"to."
msgstr ""

#: remote.c:14328
msgid "If set, interrupt sequence is sent to remote target."
msgstr ""

#. Install commands for configuring memory read/write packets.
#: remote.c:14335
msgid "Set the maximum number of bytes per memory write packet (deprecated)."
msgstr ""

#: remote.c:14338
msgid "Show the maximum number of bytes per memory write packet (deprecated)."
msgstr ""

#: remote.c:14342
msgid ""
"Set the maximum number of bytes per memory-write packet.\n"
"Specify the number of bytes in a packet or 0 (zero) for the\n"
"default packet size.  The actual limit is further reduced\n"
"dependent on the target.  Specify ``fixed'' to disable the\n"
"further restriction and ``limit'' to enable that restriction."
msgstr ""

#: remote.c:14350
msgid ""
"Set the maximum number of bytes per memory-read packet.\n"
"Specify the number of bytes in a packet or 0 (zero) for the\n"
"default packet size.  The actual limit is further reduced\n"
"dependent on the target.  Specify ``fixed'' to disable the\n"
"further restriction and ``limit'' to enable that restriction."
msgstr ""

#: remote.c:14359
msgid "Show the maximum number of bytes per memory-write packet."
msgstr ""

#: remote.c:14363
msgid "Show the maximum number of bytes per memory-read packet."
msgstr ""

#: remote.c:14367
msgid "Set the maximum number of target hardware watchpoints."
msgstr ""

#: remote.c:14368
msgid "Show the maximum number of target hardware watchpoints."
msgstr ""

#: remote.c:14369
msgid "Specify \"unlimited\" for unlimited hardware watchpoints."
msgstr ""

#: remote.c:14376
msgid "Set the maximum length (in bytes) of a target hardware watchpoint."
msgstr ""

#: remote.c:14377
msgid "Show the maximum length (in bytes) of a target hardware watchpoint."
msgstr ""

#: remote.c:14378
msgid "Specify \"unlimited\" to allow watchpoints of unlimited size."
msgstr ""

#: remote.c:14383
msgid "Set the maximum number of target hardware breakpoints."
msgstr ""

#: remote.c:14384
msgid "Show the maximum number of target hardware breakpoints."
msgstr ""

#: remote.c:14385
msgid "Specify \"unlimited\" for unlimited hardware breakpoints."
msgstr ""

#: remote.c:14391
msgid "Set the maximum size of the address (in bits) in a memory packet."
msgstr ""

#: remote.c:14392
msgid "Show the maximum size of the address (in bits) in a memory packet."
msgstr ""

#: remote.c:14689
msgid "Set use of remote protocol `Z' packets."
msgstr ""

#: remote.c:14690
msgid "Show use of remote protocol `Z' packets."
msgstr ""

#: remote.c:14691
msgid ""
"When set, GDB will attempt to use the remote breakpoint and watchpoint\n"
"packets."
msgstr ""

#: remote.c:14700
msgid ""
"Manipulate files on the remote system.\n"
"Transfer files to and from the remote target system."
msgstr ""

#: remote.c:14707
msgid "Copy a local file to the remote system."
msgstr ""

#: remote.c:14711
msgid "Copy a remote file to the local system."
msgstr ""

#: remote.c:14715
msgid "Delete a remote file."
msgstr ""

#: remote.c:14719
msgid "Set the remote pathname for \"run\"."
msgstr ""

#: remote.c:14720
msgid "Show the remote pathname for \"run\"."
msgstr ""

#: remote.c:14728
msgid "Enable or disable range stepping."
msgstr ""

#: remote.c:14729
msgid "Show whether target-assisted range stepping is enabled."
msgstr ""

#: remote.c:14730
msgid ""
"If on, and the target supports it, when stepping a source line, GDB\n"
"tells the target to step the corresponding range of addresses itself "
"instead\n"
"of issuing multiple single-steps.  This speeds up source level\n"
"stepping.  If off, GDB always issues single-steps, even if range\n"
"stepping is supported by the target.  The default is on."
msgstr ""

#: remote.c:14741
msgid "Set watchdog timer."
msgstr ""

#: remote.c:14742
msgid "Show watchdog timer."
msgstr ""

#: remote.c:14743
msgid ""
"When non-zero, this timeout is used instead of waiting forever for a target\n"
"to finish a low-level step or continue operation.  If the specified amount\n"
"of time passes without a response from the target, an error occurs."
msgstr ""

#: remote.c:14752
msgid "Set the maximum number of characters to display for each remote packet."
msgstr ""

#: remote.c:14753
msgid ""
"Show the maximum number of characters to display for each remote packet."
msgstr ""

#: remote.c:14754
msgid "Specify \"unlimited\" to display all the characters."
msgstr ""

#: reverse.c:44
#, possible-c-format
msgid "Already in reverse mode.  Use '%s' or 'set exec-dir forward'."
msgstr ""

#: reverse.c:130
msgid "target_get_bookmark failed."
msgstr ""

#: reverse.c:153
#, possible-c-format
msgid "Saved bookmark %d at %s\n"
msgstr ""

#: reverse.c:208
msgid "No bookmarks."
msgstr ""

#: reverse.c:214
msgid "Delete all bookmarks? "
msgstr ""

#. Not found.
#: reverse.c:226
#, possible-c-format
msgid "No bookmark #%d."
msgstr ""

#: reverse.c:240 thread.c:1913
msgid "Command requires an argument."
msgstr ""

#: reverse.c:264
#, possible-c-format
msgid "goto-bookmark: invalid bookmark number '%s'."
msgstr ""

#. Not found.
#: reverse.c:277
#, possible-c-format
msgid "goto-bookmark: no bookmark found for '%s'."
msgstr ""

#: reverse.c:311
msgid "No bookmarks.\n"
msgstr ""

#: reverse.c:328
msgid ""
"Step program backward until it reaches the beginning of another source "
"line.\n"
"Argument N means do this N times (or till program stops for another reason)."
msgstr ""

#: reverse.c:334
msgid ""
"Step program backward, proceeding through subroutine calls.\n"
"Like the \"reverse-step\" command as long as subroutine calls do not "
"happen;\n"
"when they do, the call is treated as one instruction.\n"
"Argument N means do this N times (or till program stops for another reason)."
msgstr ""

#: reverse.c:342
msgid ""
"Step backward exactly one instruction.\n"
"Argument N means do this N times (or till program stops for another reason)."
msgstr ""

#: reverse.c:348
msgid ""
"Step backward one instruction, but proceed through called subroutines.\n"
"Argument N means do this N times (or till program stops for another reason)."
msgstr ""

#: reverse.c:354
msgid ""
"Continue program being debugged but run it in reverse.\n"
"If proceeding from breakpoint, a number N may be used as an argument,\n"
"which means to set the ignore count of that breakpoint to N - 1 (so that\n"
"the breakpoint won't break until the Nth time it is reached)."
msgstr ""

#: reverse.c:361
msgid "Execute backward until just before selected stack frame is called."
msgstr ""

#: reverse.c:364
msgid ""
"Set a bookmark in the program's execution history.\n"
"A bookmark represents a point in the execution history \n"
"that can be returned to at a later point in the debug session."
msgstr ""

#: reverse.c:368
msgid ""
"Status of user-settable bookmarks.\n"
"Bookmarks are user-settable markers representing a point in the \n"
"execution history that can be returned to later in the same debug \n"
"session."
msgstr ""

#: reverse.c:373
msgid ""
"Delete a bookmark from the bookmark list.\n"
"Argument is a bookmark number or numbers,\n"
" or no argument to delete all bookmarks."
msgstr ""

#: reverse.c:378
msgid ""
"Go to an earlier-bookmarked point in the program's execution history.\n"
"Argument is the bookmark number of a bookmark saved earlier by using \n"
"the 'bookmark' command, or the special arguments:\n"
"  start (beginning of recording)\n"
"  end   (end of recording)"
msgstr ""

#: riscv-fbsd-tdep.c:192
#, possible-c-format
msgid "Unable to fetch %%tp"
msgstr ""

#: riscv-tdep.c:277
#, possible-c-format
msgid "Debugger's use of compressed breakpoints is set to %s.\n"
msgstr ""

#: riscv-tdep.c:300
msgid "\"set riscv\" must be followed by an appropriate subcommand.\n"
msgstr ""

#: riscv-tdep.c:323
msgid "\"set debug riscv\" must be followed by an appropriate subcommand.\n"
msgstr ""

#: riscv-tdep.c:335
#, possible-c-format
msgid "RiscV debug variable `%s' is set to: %s\n"
msgstr ""

#: riscv-tdep.c:485
msgid "unhandled breakpoint kind"
msgstr ""

#: riscv-tdep.c:2210 riscv-tdep.c:2220 riscv-tdep.c:2235 riscv-tdep.c:2242
#: riscv-tdep.c:2262 riscv-tdep.c:2268
msgid "failed during argument setup"
msgstr ""

#. The second location should never be a reference, any
#. argument being passed by reference just places its address
#. in the first location and is done.
#: riscv-tdep.c:2384 riscv-tdep.c:2607 riscv-tdep.c:2748 riscv-tdep.c:2771
#: riscv-tdep.c:2794
msgid "invalid argument location"
msgstr ""

#: riscv-tdep.c:2421 riscv-tdep.c:2568
msgid "unknown argument location type"
msgstr ""

#: riscv-tdep.c:2946
#, possible-c-format
msgid "unknown ELF header class %d"
msgstr ""

#: riscv-tdep.c:3229
#, possible-c-format
msgid "bfd requires xlen %d, but target has xlen %d"
msgstr ""

#: riscv-tdep.c:3235
#, possible-c-format
msgid "bfd requires flen %d, but target has flen %d"
msgstr ""

#: riscv-tdep.c:3522 riscv-tdep.c:3527
msgid "RISC-V specific debug commands."
msgstr ""

#: riscv-tdep.c:3532
msgid "Set riscv breakpoint debugging."
msgstr ""

#: riscv-tdep.c:3533
msgid "Show riscv breakpoint debugging."
msgstr ""

#: riscv-tdep.c:3534
msgid ""
"When non-zero, print debugging information for the riscv specific parts\n"
"of the breakpoint mechanism."
msgstr ""

#: riscv-tdep.c:3542
msgid "Set riscv inferior call debugging."
msgstr ""

#: riscv-tdep.c:3543
msgid "Show riscv inferior call debugging."
msgstr ""

#: riscv-tdep.c:3544
msgid ""
"When non-zero, print debugging information for the riscv specific parts\n"
"of the inferior call mechanism."
msgstr ""

#: riscv-tdep.c:3552
msgid "Set riscv stack unwinding debugging."
msgstr ""

#: riscv-tdep.c:3553
msgid "Show riscv stack unwinding debugging."
msgstr ""

#: riscv-tdep.c:3554
msgid ""
"When non-zero, print debugging information for the riscv specific parts\n"
"of the stack unwinding mechanism."
msgstr ""

#: riscv-tdep.c:3562
msgid "Set riscv gdbarch initialisation debugging."
msgstr ""

#: riscv-tdep.c:3563
msgid "Show riscv gdbarch initialisation debugging."
msgstr ""

#: riscv-tdep.c:3564
msgid ""
"When non-zero, print debugging information for the riscv gdbarch\n"
"initialisation process."
msgstr ""

#: riscv-tdep.c:3573 riscv-tdep.c:3577
msgid "RISC-V specific commands."
msgstr ""

#: riscv-tdep.c:3584
msgid "Set debugger's use of compressed breakpoints."
msgstr ""

#: riscv-tdep.c:3585
msgid "\tShow debugger's use of compressed breakpoints."
msgstr ""

#: riscv-tdep.c:3586
msgid ""
"Debugging compressed code requires compressed breakpoints to be used. If\n"
"left to 'auto' then gdb will use them if the existing instruction is a\n"
"compressed instruction. If that doesn't give the correct behavior, then\n"
"this option can be used."
msgstr ""

#: rl78-tdep.c:852
#, possible-c-format
msgid "Undefined mapping for opc reg %d"
msgstr ""

#: rs6000-aix-tdep.c:1111
#, possible-c-format
msgid "cannot find .ldinfo section from core file: %s"
msgstr ""

#: rs6000-aix-tdep.c:1119
#, possible-c-format
msgid "unable to read .ldinfo section from core file: %s"
msgstr ""

#. FIXME: this happens 3 times at the start of each 64-bit program.
#: rs6000-nat.c:239
msgid "ptrace read"
msgstr ""

#: rs6000-nat.c:299
msgid "ptrace write"
msgstr ""

#: rs6000-nat.c:601
msgid "rs6000_create_inferior: failed to select architecture"
msgstr ""

#: rs6000-nat.c:631
msgid "ptrace ldinfo"
msgstr ""

#: rs6000-tdep.c:2498
#, possible-c-format
msgid "rs6000_pseudo_register_type: called on unexpected register '%s' (%d)"
msgstr ""

#: rs6000-tdep.c:2937
msgid ""
"Cannot write to the checkpointed EFP register, the corresponding vector "
"register is unavailable."
msgstr ""

#: rs6000-tdep.c:2972
#, possible-c-format
msgid "rs6000_pseudo_register_read: called on unexpected register '%s' (%d)"
msgstr ""

#: rs6000-tdep.c:3002
#, possible-c-format
msgid "rs6000_pseudo_register_write: called on unexpected register '%s' (%d)"
msgstr ""

#: rs6000-tdep.c:3144
#, possible-c-format
msgid "rs6000_pseudo_register_collect: called on unexpected register '%s' (%d)"
msgstr ""

#: rs6000-tdep.c:7179
msgid "\"set powerpc\" must be followed by an appropriate subcommand.\n"
msgstr ""

#: rs6000-tdep.c:7220
#, possible-c-format
msgid "Invalid vector ABI accepted: %s."
msgstr ""

#: rs6000-tdep.c:7236
#, possible-c-format
msgid "Use of exact watchpoints is %s.\n"
msgstr ""

#: rs6000-tdep.c:7340 rs6000-tdep.c:7344
msgid "Various PowerPC-specific commands."
msgstr ""

#: rs6000-tdep.c:7350
msgid "Set whether to use a soft-float ABI."
msgstr ""

#: rs6000-tdep.c:7351
msgid "Show whether to use a soft-float ABI."
msgstr ""

#: rs6000-tdep.c:7358
msgid "Set the vector ABI."
msgstr ""

#: rs6000-tdep.c:7359
msgid "Show the vector ABI."
msgstr ""

#: rs6000-tdep.c:7365
msgid "Set whether to use just one debug register for watchpoints on scalars."
msgstr ""

#: rs6000-tdep.c:7367
msgid "Show whether to use just one debug register for watchpoints on scalars."
msgstr ""

#: rs6000-tdep.c:7369
msgid ""
"If true, GDB will use only one debug register when watching a variable of\n"
"scalar type, thus assuming that the variable is accessed through the "
"address\n"
"of its first byte."
msgstr ""

#: rust-exp.y:222
#, possible-c-format
msgid "Could not find Rust type %s"
msgstr ""

#: rust-exp.y:472
msgid "Tuple expressions not supported yet"
msgstr ""

#: rust-exp.y:1049
msgid "Could not find crate for current location"
msgstr ""

#: rust-exp.y:1069
msgid "Couldn't find namespace scope for self::"
msgstr ""

#: rust-exp.y:1090
#, possible-c-format
msgid "Too many super:: uses from '%s'"
msgstr ""

#: rust-exp.y:1143
msgid "Not enough hex digits seen"
msgstr ""

#: rust-exp.y:1147
msgid "Overlong hex escape"
msgstr ""

#: rust-exp.y:1172
msgid "Unicode escape in byte literal"
msgstr ""

#: rust-exp.y:1175
msgid "Missing '{' in Unicode escape"
msgstr ""

#: rust-exp.y:1180
msgid "Missing '}' in Unicode escape"
msgstr ""

#: rust-exp.y:1214
#, possible-c-format
msgid "Invalid escape \\%c in literal"
msgstr ""

#: rust-exp.y:1245
msgid "Unterminated character literal"
msgstr ""

#: rust-exp.y:1316 rust-exp.y:1343
msgid "Unexpected EOF in string"
msgstr ""

#: rust-exp.y:1320
msgid "Non-ASCII value in raw byte string"
msgstr ""

#: rust-exp.y:1348
msgid "Non-ASCII value in byte string"
msgstr ""

#: rust-exp.y:2065
#, possible-c-format
msgid "No typed name '%s' in current context"
msgstr ""

#: rust-exp.y:2076
msgid "Negative array length"
msgstr ""

#: rust-exp.y:2138
#, possible-c-format
msgid "could not find tuple type '%s'"
msgstr ""

#: rust-exp.y:2340
#, possible-c-format
msgid "Type %s is not a tuple struct"
msgstr ""

#: rust-exp.y:2413
#, possible-c-format
msgid "No symbol '%s' in current context"
msgstr ""

#: rust-exp.y:2432
#, possible-c-format
msgid "Found type '%s', which can't be evaluated in this context"
msgstr ""

#: rust-exp.y:2471
#, possible-c-format
msgid "Could not find type '%s'"
msgstr ""

#: rust-exp.y:2476
msgid "Struct expression applied to non-struct type"
msgstr ""

#: rust-exp.y:2562
#, possible-c-format
msgid "%s in expression, near `%s'."
msgstr ""

#. Print the enum type name here to be more clear.
#: rust-lang.c:477
#, possible-c-format
msgid "%s {%p[<No data fields>%p]}"
msgstr ""

#: rust-lang.c:615
msgid "Could not determine the array bounds"
msgstr ""

#: rust-lang.c:1180
msgid "Method calls only supported on struct or enum types"
msgstr ""

#: rust-lang.c:1182
msgid "Method call on nameless type"
msgstr ""

#: rust-lang.c:1189
#, possible-c-format
msgid "Could not find function named '%s'"
msgstr ""

#: rust-lang.c:1193
#, possible-c-format
msgid "Function '%s' takes no arguments"
msgstr ""

#: rust-lang.c:1262
msgid "Range expression with different types"
msgstr ""

#: rust-lang.c:1371
msgid "Can't take slice of array without '&'"
msgstr ""

#: rust-lang.c:1395
msgid "Could not find 'data_ptr' in slice type"
msgstr ""

#: rust-lang.c:1400 rust-lang.c:1451
msgid "Cannot subscript non-array type"
msgstr ""

#: rust-lang.c:1430
msgid "Can't compute array bounds"
msgstr ""

#: rust-lang.c:1432
msgid "Found array with non-zero lower bound"
msgstr ""

#: rust-lang.c:1457
msgid "Index less than zero"
msgstr ""

#: rust-lang.c:1459
msgid "Index greater than length"
msgstr ""

#: rust-lang.c:1475
msgid "High index less than zero"
msgstr ""

#: rust-lang.c:1477
msgid "Low index greater than high index"
msgstr ""

#: rust-lang.c:1479
msgid "High index greater than length"
msgstr ""

#: rust-lang.c:1642
msgid "Array with negative number of elements"
msgstr ""

#: rust-lang.c:1683
#, possible-c-format
msgid "Cannot access field %d of empty enum %s"
msgstr ""

#: rust-lang.c:1706
#, possible-c-format
msgid "Cannot access field %d of variant %s::%s, there are only %d fields"
msgstr ""

#: rust-lang.c:1712
#, possible-c-format
msgid "Cannot access field %d of %s, there are only %d fields"
msgstr ""

#: rust-lang.c:1721
#, possible-c-format
msgid "Variant %s::%s is not a tuple variant"
msgstr ""

#: rust-lang.c:1725
#, possible-c-format
msgid ""
"Attempting to access anonymous field %d of %s, which is not a tuple, tuple "
"struct, or tuple-like variant"
msgstr ""

#: rust-lang.c:1734
msgid ""
"Anonymous field access is only allowed on tuples, tuple structs, and tuple-"
"like enum variants"
msgstr ""

#: rust-lang.c:1755
#, possible-c-format
msgid "Cannot access field %s of empty enum %s"
msgstr ""

#: rust-lang.c:1772
#, possible-c-format
msgid ""
"Attempting to access named field %s of tuple variant %s::%s, which has only "
"anonymous fields"
msgstr ""

#: rust-lang.c:1784
#, possible-c-format
msgid "Could not find field %s of struct variant %s::%s"
msgstr ""

#: s12z-tdep.c:93
#, possible-c-format
msgid "%s Failed to find end of prologue PC = %08x"
msgstr ""

#: s12z-tdep.c:299
#, possible-c-format
msgid "Couldn't find function including address %s SP is %s"
msgstr ""

#: s12z-tdep.c:646
msgid "Show the current value of the microcontroller's BDCCSR."
msgstr ""

#: s390-linux-nat.c:643
msgid "Couldn't retrieve debug regs"
msgstr ""

#: s390-linux-nat.c:680
msgid "Couldn't retrieve watchpoint status"
msgstr ""

#: s390-linux-nat.c:690
msgid "Couldn't clear watchpoint status"
msgstr ""

#: s390-linux-nat.c:790
msgid "Couldn't modify watchpoint status"
msgstr ""

#: s390-linux-nat.c:1057
msgid "Set whether to show the PER (debug) hardware state."
msgstr ""

#: s390-linux-nat.c:1058
msgid "Show whether to show the PER (debug) hardware state."
msgstr ""

#: s390-linux-nat.c:1059
msgid ""
"Use \"on\" to enable, \"off\" to disable.\n"
"If enabled, the PER state is shown after it is changed by GDB,\n"
"and when the inferior triggers a breakpoint or watchpoint."
msgstr ""

#: s390-tdep.c:1953
msgid "Stack overflow"
msgstr ""

#: s390-tdep.c:2071
msgid "invalid return type"
msgstr ""

#: s390-tdep.c:2109
msgid "Cannot set function return value."
msgstr ""

#: s390-tdep.c:2111
msgid "Function return value unknown."
msgstr ""

#: score-tdep.c:137 score-tdep.c:229 score-tdep.c:300 score-tdep.c:807
#, possible-c-format
msgid "Error: target_read_memory in file:%s, line:%d!"
msgstr ""

#: score-tdep.c:428
#, possible-c-format
msgid "Error: score_xfer_register in file:%s, line:%d!"
msgstr ""

#: selftest-arch.c:79
#, possible-c-format
msgid "Self test failed: arch %s: "
msgstr ""

#. The sentinel frame is used as a starting point for creating the
#. previous (inner most) frame.  That frame's THIS_ID method will be
#. called to determine the inner most frame's ID.  Not this one.
#: sentinel-frame.c:67
msgid "sentinel_frame_this_id called"
msgstr ""

#. Mark fixed motherboard irqs as inuse.
#. timer tick
#. keyboard
#. slave icu
#: ser-go32.c:931
msgid "Set COM1 base i/o port address."
msgstr ""

#: ser-go32.c:932
msgid "Show COM1 base i/o port address."
msgstr ""

#: ser-go32.c:938
msgid "Set COM1 interrupt request."
msgstr ""

#: ser-go32.c:939
msgid "Show COM1 interrupt request."
msgstr ""

#: ser-go32.c:945
msgid "Set COM2 base i/o port address."
msgstr ""

#: ser-go32.c:946
msgid "Show COM2 base i/o port address."
msgstr ""

#: ser-go32.c:952
msgid "Set COM2 interrupt request."
msgstr ""

#: ser-go32.c:953
msgid "Show COM2 interrupt request."
msgstr ""

#: ser-go32.c:959
msgid "Set COM3 base i/o port address."
msgstr ""

#: ser-go32.c:960
msgid "Show COM3 base i/o port address."
msgstr ""

#: ser-go32.c:966
msgid "Set COM3 interrupt request."
msgstr ""

#: ser-go32.c:967
msgid "Show COM3 interrupt request."
msgstr ""

#: ser-go32.c:973
msgid "Set COM4 base i/o port address."
msgstr ""

#: ser-go32.c:974
msgid "Show COM4 base i/o port address."
msgstr ""

#: ser-go32.c:980
msgid "Set COM4 interrupt request."
msgstr ""

#: ser-go32.c:981
msgid "Show COM4 interrupt request."
msgstr ""

#: ser-go32.c:988
msgid "Print DOS serial port status."
msgstr ""

#: ser-mingw.c:165
msgid "SetCommState failed"
msgstr ""

#: ser-mingw.c:292
msgid "ser_windows_wait_handle: reseting mask failed"
msgstr ""

#: ser-mingw.c:295
msgid "ser_windows_wait_handle: reseting mask failed (2)"
msgstr ""

#: ser-mingw.c:863
msgid "child command"
msgstr ""

#: ser-mingw.c:868
msgid "missing child command"
msgstr ""

#: ser-mingw.c:894
#, possible-c-format
msgid "error starting child process '%s': %s: %s"
msgstr ""

#: ser-mingw.c:897
#, possible-c-format
msgid "error starting child process '%s': %s"
msgstr ""

#: ser-tcp.c:299
#, possible-c-format
msgid "%s: cannot resolve name: %s\n"
msgstr ""

#. allow-unknown
#: ser-tcp.c:482 ser-tcp.c:487
msgid ""
"TCP protocol specific variables.\n"
"Configure variables specific to remote TCP connections."
msgstr ""

#: ser-tcp.c:494
msgid "Set auto-retry on socket connect."
msgstr ""

#: ser-tcp.c:495
msgid "Show auto-retry on socket connect."
msgstr ""

#: ser-tcp.c:501
msgid "Set timeout limit in seconds for socket connection."
msgstr ""

#: ser-tcp.c:502
msgid "Show timeout limit in seconds for socket connection."
msgstr ""

#: ser-tcp.c:503
msgid ""
"If set to \"unlimited\", GDB will keep attempting to establish a\n"
"connection forever, unless interrupted with Ctrl-c.\n"
"The default is 15 seconds."
msgstr ""

#: ser-uds.c:41
#, possible-c-format
msgid "The socket name is too long.  It may be no longer than %s bytes."
msgstr ""

#: ser-unix.c:49
#, possible-c-format
msgid "Hardware flow control is %s.\n"
msgstr ""

#: ser-unix.c:354
#, possible-c-format
msgid "Invalid baud rate %d.  Closest values are %d and %d."
msgstr ""

#: ser-unix.c:360
#, possible-c-format
msgid "Invalid baud rate %d.  Minimum value is %d."
msgstr ""

#. The requested speed was too large.
#: ser-unix.c:369
#, possible-c-format
msgid "Invalid baud rate %d.  Maximum value is %d."
msgstr ""

#: ser-unix.c:508
msgid "Set use of hardware flow control for remote serial I/O."
msgstr ""

#: ser-unix.c:509
msgid "Show use of hardware flow control for remote serial I/O."
msgstr ""

#: ser-unix.c:510
msgid ""
"Enable or disable hardware flow control (RTS/CTS) on the serial port\n"
"when debugging using remote targets."
msgstr ""

#: serial.c:392
msgid "serial_readchar: blocking read in async mode"
msgstr ""

#: serial.c:647
#, possible-c-format
msgid "Baud rate for remote serial I/O is %s.\n"
msgstr ""

#: serial.c:679
msgid ""
"Connect the terminal directly up to the command monitor.\n"
"Use <CR>~. or <CR>~^D to break out."
msgstr ""

#: serial.c:684
msgid "Set default serial/parallel port configuration."
msgstr ""

#: serial.c:690
msgid "Show default serial/parallel port configuration."
msgstr ""

#. If target is open when baud changes, it doesn't take effect until
#. the next open (I think, not sure).
#: serial.c:698
msgid "Set baud rate for remote serial I/O."
msgstr ""

#: serial.c:699
msgid "Show baud rate for remote serial I/O."
msgstr ""

#: serial.c:700
msgid ""
"This value is used to set the speed of the serial port when debugging\n"
"using remote targets."
msgstr ""

#: serial.c:708
msgid "Set parity for remote serial I/O."
msgstr ""

#: serial.c:709
msgid "Show parity for remote serial I/O."
msgstr ""

#: serial.c:715
msgid "Set filename for remote session recording."
msgstr ""

#: serial.c:716
msgid "Show filename for remote session recording."
msgstr ""

#: serial.c:717
msgid ""
"This file is used to record the remote session for future playback\n"
"by gdbserver."
msgstr ""

#: serial.c:725
msgid "Set numerical base for remote session logging."
msgstr ""

#: serial.c:726
msgid "Show numerical base for remote session logging."
msgstr ""

#: serial.c:733
msgid "Set serial debugging."
msgstr ""

#: serial.c:734
msgid "Show serial debugging."
msgstr ""

#: serial.c:735
msgid "When non-zero, serial port debugging is enabled."
msgstr ""

#: sh-tdep.c:1601
msgid "sh_register_convert_to_raw called with non DR register number"
msgstr ""

#: sh-tdep.c:2437
msgid "Set calling convention used when calling target functions from GDB."
msgstr ""

#: sh-tdep.c:2439
msgid "Show calling convention used when calling target functions from GDB."
msgstr ""

#: sh-tdep.c:2441
msgid ""
"gcc       - Use GCC calling convention (default).\n"
"renesas   - Enforce Renesas calling convention."
msgstr ""

#: skip.c:150
msgid "regexp"
msgstr ""

#: skip.c:180
msgid "No default file now."
msgstr ""

#: skip.c:192
#, possible-c-format
msgid "File %s will be skipped when stepping.\n"
msgstr ""

#: skip.c:203
#, possible-c-format
msgid "Function %s will be skipped when stepping.\n"
msgstr ""

#: skip.c:216
msgid "No default function now."
msgstr ""

#: skip.c:221
#, possible-c-format
msgid "No function found containing current program point %s."
msgstr ""

#: skip.c:259 skip.c:267 skip.c:275 skip.c:283
#, possible-c-format
msgid "Missing value for %s option."
msgstr ""

#: skip.c:288
#, possible-c-format
msgid "Invalid skip option: %s"
msgstr ""

#: skip.c:303
msgid "Cannot specify both -file and -gfile."
msgstr ""

#: skip.c:306
msgid "Cannot specify both -function and -rfunction."
msgstr ""

#: skip.c:335
msgid "File(s)"
msgstr ""

#: skip.c:335
msgid "File"
msgstr ""

#: skip.c:336
msgid "file(s)"
msgstr ""

#: skip.c:338
msgid "Function(s)"
msgstr ""

#: skip.c:338
msgid "Function"
msgstr ""

#: skip.c:342 skip.c:347
#, possible-c-format
msgid "%s %s will be skipped when stepping.\n"
msgstr ""

#: skip.c:352
#, possible-c-format
msgid "%s %s in %s %s will be skipped when stepping.\n"
msgstr ""

#: skip.c:377
msgid "Not skipping any files or functions.\n"
msgstr ""

#: skip.c:380
#, possible-c-format
msgid "No skiplist entries found with number %s.\n"
msgstr ""

#: skip.c:450 skip.c:466 skip.c:490
#, possible-c-format
msgid "No skiplist entries found with number %s."
msgstr ""

#: skip.c:674
msgid ""
"Ignore a function while stepping.\n"
"\n"
"Usage: skip [FUNCTION-NAME]\n"
"       skip [FILE-SPEC] [FUNCTION-SPEC]\n"
"If no arguments are given, ignore the current function.\n"
"\n"
"FILE-SPEC is one of:\n"
"       -fi|-file FILE-NAME\n"
"       -gfi|-gfile GLOB-FILE-PATTERN\n"
"FUNCTION-SPEC is one of:\n"
"       -fu|-function FUNCTION-NAME\n"
"       -rfu|-rfunction FUNCTION-NAME-REGULAR-EXPRESSION"
msgstr ""

#: skip.c:689
msgid ""
"Ignore a file while stepping.\n"
"Usage: skip file [FILE-NAME]\n"
"If no filename is given, ignore the current file."
msgstr ""

#: skip.c:696
msgid ""
"Ignore a function while stepping.\n"
"Usage: skip function [FUNCTION-NAME]\n"
"If no function name is given, skip the current function."
msgstr ""

#: skip.c:703
msgid ""
"Enable skip entries.\n"
"Usage: skip enable [NUMBER | RANGE]...\n"
"You can specify numbers (e.g. \"skip enable 1 3\"),\n"
"ranges (e.g. \"skip enable 4-8\"), or both (e.g. \"skip enable 1 3 4-8\").\n"
"\n"
"If you don't specify any numbers or ranges, we'll enable all skip entries."
msgstr ""

#: skip.c:712
msgid ""
"Disable skip entries.\n"
"Usage: skip disable [NUMBER | RANGE]...\n"
"You can specify numbers (e.g. \"skip disable 1 3\"),\n"
"ranges (e.g. \"skip disable 4-8\"), or both (e.g. \"skip disable 1 3 "
"4-8\").\n"
"\n"
"If you don't specify any numbers or ranges, we'll disable all skip entries."
msgstr ""

#: skip.c:721
msgid ""
"Delete skip entries.\n"
"Usage: skip delete [NUMBER | RANGES]...\n"
"You can specify numbers (e.g. \"skip delete 1 3\"),\n"
"ranges (e.g. \"skip delete 4-8\"), or both (e.g. \"skip delete 1 3 4-8\").\n"
"\n"
"If you don't specify any numbers or ranges, we'll delete all skip entries."
msgstr ""

#: skip.c:730
msgid ""
"Display the status of skips.\n"
"Usage: info skip [NUMBER | RANGES]...\n"
"You can specify numbers (e.g. \"info skip 1 3\"), \n"
"ranges (e.g. \"info skip 4-8\"), or both (e.g. \"info skip 1 3 4-8\").\n"
"\n"
"If you don't specify any numbers or ranges, we'll show all skips."
msgstr ""

#: skip.c:739
msgid ""
"Set whether to print the debug output about skipping files and functions."
msgstr ""

#: skip.c:741
msgid ""
"Show whether the debug output about skipping files and functions is printed."
msgstr ""

#: skip.c:743
msgid ""
"When non-zero, debug output about skipping files and functions is displayed."
msgstr ""

#: sol-thread.c:74
msgid "Solaris threads and pthread."
msgstr ""

#: sol-thread.c:75
msgid "Solaris threads and pthread support."
msgstr ""

#: sol-thread.c:311
#, possible-c-format
msgid "thread_to_lwp: td_ta_map_id2thr %s"
msgstr ""

#: sol-thread.c:317
#, possible-c-format
msgid "thread_to_lwp: td_thr_get_info: %s"
msgstr ""

#: sol-thread.c:323
#, possible-c-format
msgid "thread_to_lwp: thread state not active: %s"
msgstr ""

#: sol-thread.c:354
#, possible-c-format
msgid "lwp_to_thread: td_ta_map_lwp2thr: %s."
msgstr ""

#: sol-thread.c:360
#, possible-c-format
msgid "lwp_to_thread: td_thr_validate: %s."
msgstr ""

#: sol-thread.c:366
#, possible-c-format
msgid "lwp_to_thread: td_thr_get_info: %s."
msgstr ""

#. Inactive thread.
#: sol-thread.c:414 sol-thread.c:446
msgid "This version of Solaris can't start inactive threads."
msgstr ""

#: sol-thread.c:416 sol-thread.c:448
#, possible-c-format
msgid "Specified thread %ld seems to have terminated"
msgstr ""

#: sol-thread.c:499
msgid "sol_thread_fetch_registers: thread == 0"
msgstr ""

#: sol-thread.c:503
#, possible-c-format
msgid "sol_thread_fetch_registers: td_ta_map_id2thr: %s"
msgstr ""

#: sol-thread.c:510
#, possible-c-format
msgid "sol_thread_fetch_registers: td_thr_getgregs %s"
msgstr ""

#: sol-thread.c:520
#, possible-c-format
msgid "sol_thread_fetch_registers: td_thr_getfpregs %s"
msgstr ""

#: sol-thread.c:553
#, possible-c-format
msgid "sol_thread_store_registers: td_ta_map_id2thr %s"
msgstr ""

#: sol-thread.c:560
#, possible-c-format
msgid "sol_thread_store_registers: td_thr_getgregs %s"
msgstr ""

#: sol-thread.c:564
#, possible-c-format
msgid "sol_thread_store_registers: td_thr_getfpregs %s"
msgstr ""

#: sol-thread.c:573
#, possible-c-format
msgid "sol_thread_store_registers: td_thr_setgregs %s"
msgstr ""

#: sol-thread.c:577
#, possible-c-format
msgid "sol_thread_store_registers: td_thr_setfpregs %s"
msgstr ""

#: sol-thread.c:634
#, possible-c-format
msgid "sol_thread_new_objfile: td_init: %s"
msgstr ""

#: sol-thread.c:662
#, possible-c-format
msgid "Cannot initialize thread debugging library: %s"
msgstr ""

#: sol-thread.c:1131
msgid "info sol-thread: failed to get info for thread."
msgstr ""

#: sol-thread.c:1219
msgid "Show info on Solaris user threads."
msgstr ""

#: solib-aix.c:107 solib-target.c:64
msgid ""
"Can not parse XML library list; XML support was disabled at compile time"
msgstr ""

#: solib-aix.c:165 solib-target.c:161
#, possible-c-format
msgid "Library list has unsupported version \"%s\""
msgstr ""

#: solib-aix.c:214
msgid "aix library list"
msgstr ""

#: solib-aix.c:248
#, possible-c-format
msgid "%s (failed to read TARGET_OBJECT_LIBRARIES_AIX)"
msgstr ""

#: solib-aix.c:260
#, possible-c-format
msgid "%s (missing XML support?)"
msgstr ""

#: solib-aix.c:464
msgid "unable to relocate main executable (no info from loader)"
msgstr ""

#. Should never happen, but recover as best as we can (trying
#. to open pathname without decoding, possibly leading to
#. a failure), rather than triggering an assert failure).
#: solib-aix.c:579
#, possible-c-format
msgid "missing '(' in shared object pathname: %s"
msgstr ""

#. Arrange to free PATHNAME when the error is thrown.
#: solib-aix.c:599 solib.c:472
#, possible-c-format
msgid "Could not open `%s' as an executable file: %s"
msgstr ""

#: solib-aix.c:609
#, possible-c-format
msgid "\"%s\": not in executable format: %s."
msgstr ""

#: solib-aix.c:627
#, possible-c-format
msgid "\"%s\": member \"%s\" missing."
msgstr ""

#: solib-aix.c:634
#, possible-c-format
msgid "%s(%s): not in object format: %s."
msgstr ""

#: solib-aix.c:679
#, possible-c-format
msgid "unable to find TOC entry for pc %s (no section contains this PC)"
msgstr ""

#: solib-aix.c:685
#, possible-c-format
msgid "unable to find TOC entry for pc %s (%s has no data section)"
msgstr ""

#: solib-aix.c:720
#, possible-c-format
msgid "solib-aix debugging is %s.\n"
msgstr ""

#: solib-aix.c:746
msgid "Control the debugging traces for the solib-aix module."
msgstr ""

#: solib-aix.c:747
msgid "Show whether solib-aix debugging traces are enabled."
msgstr ""

#: solib-aix.c:748
msgid "When on, solib-aix debugging traces are enabled."
msgstr ""

#: solib-darwin.c:524
#, possible-c-format
msgid "unhandled dyld version (%d)"
msgstr ""

#: solib-darwin.c:659
#, possible-c-format
msgid "`%s': not a shared-library: %s"
msgstr ""

#: solib-dsbt.c:193
#, possible-c-format
msgid "Unsupported map version: %d\n"
msgstr ""

#: solib-dsbt.c:288
msgid "Error reading DSBT exec loadmap"
msgstr ""

#: solib-dsbt.c:298
msgid "Error reading DSBT interp loadmap"
msgstr ""

#: solib-dsbt.c:658
msgid ""
"dsbt_current_sos: Unable to read link map entry.  Shared object chain may be "
"incomplete."
msgstr ""

#: solib-dsbt.c:672
msgid ""
"dsbt_current_sos: Unable to read dsbt index.  Shared object chain may be "
"incomplete."
msgstr ""

#: solib-dsbt.c:693
msgid ""
"dsbt_current_sos: Unable to fetch load map.  Shared object chain may be "
"incomplete."
msgstr ""

#: solib-dsbt.c:710 solib-frv.c:415
#, possible-c-format
msgid "Can't read pathname for link map entry: %s."
msgstr ""

#: solib-dsbt.c:757 solib-frv.c:486 solib-svr4.c:2444
msgid ""
"Unable to find dynamic linker breakpoint function.\n"
"GDB will be unable to debug shared library initializers\n"
"and track explicitly loaded dynamic code."
msgstr ""

#: solib-dsbt.c:971 solib-frv.c:845
msgid "shared library handler failed to enable breakpoint"
msgstr ""

#: solib-dsbt.c:1021
#, possible-c-format
msgid "solib-dsbt debugging is %s.\n"
msgstr ""

#: solib-dsbt.c:1040
msgid "Set internal debugging of shared library code for DSBT ELF."
msgstr ""

#: solib-dsbt.c:1041
msgid "Show internal debugging of shared library code for DSBT ELF."
msgstr ""

#: solib-dsbt.c:1042
msgid "When non-zero, DSBT solib specific internal debugging is enabled."
msgstr ""

#: solib-frv.c:365
msgid ""
"frv_current_sos: Unable to read link map entry.  Shared object chain may be "
"incomplete."
msgstr ""

#: solib-frv.c:392
msgid ""
"frv_current_sos: Unable to fetch load map.  Shared object chain may be "
"incomplete."
msgstr ""

#: solib-frv.c:582
msgid "Unable to determine dynamic linker loadmap address."
msgstr ""

#: solib-frv.c:595
#, possible-c-format
msgid "Unable to load dynamic linker loadmap at address %s."
msgstr ""

#: solib-frv.c:626
msgid "Could not find symbol _dl_debug_addr in dynamic linker"
msgstr ""

#: solib-frv.c:649
#, possible-c-format
msgid ""
"Unable to fetch contents of _dl_debug_addr (at address %s) from dynamic "
"linker"
msgstr ""

#: solib-frv.c:675
#, possible-c-format
msgid ""
"Unable to fetch _dl_debug_addr->r_brk (at address %s) from dynamic linker"
msgstr ""

#: solib-frv.c:686
#, possible-c-format
msgid ""
"Unable to fetch _dl_debug_addr->.r_brk entry point (at address %s) from "
"dynamic linker"
msgstr ""

#: solib-frv.c:782
msgid "Unable to load the executable's loadmap."
msgstr ""

#: solib-frv.c:1160
msgid "Set internal debugging of shared library code for FR-V."
msgstr ""

#: solib-frv.c:1161
msgid "Show internal debugging of shared library code for FR-V."
msgstr ""

#: solib-frv.c:1162
msgid "When non-zero, FR-V solib specific internal debugging is enabled."
msgstr ""

#: solib-svr4.c:189
#, possible-c-format
msgid "Error reading shared library list entry at %s"
msgstr ""

#: solib-svr4.c:295
#, possible-c-format
msgid ""
"Using PIC (Position Independent Code) prelink displacement %s for \"%s\".\n"
msgstr ""

#. There is no way to verify the library file matches.  prelink
#. can during prelinking of an unprelinked file (or unprelinking
#. of a prelinked file) shift the DYNAMIC segment by arbitrary
#. offset without any page size alignment.  There is no way to
#. find out the ELF header and/or Program Headers for a limited
#. verification if it they match.  One could do a verification
#. of the DYNAMIC segment.  Still the found address is the best
#. one GDB could find.
#: solib-svr4.c:311
#, possible-c-format
msgid ""
".dynamic section for \"%s\" is not at the expected address (wrong library or "
"version mismatch?)"
msgstr ""

#: solib-svr4.c:973
msgid "Attempt to reload symbols from process? "
msgstr ""

#: solib-svr4.c:1000
#, possible-c-format
msgid "failed to read exec filename from attached file: %s"
msgstr ""

#: solib-svr4.c:1150
#, possible-c-format
msgid "SVR4 Library list has unsupported version \"%s\""
msgstr ""

#: solib-svr4.c:1209 solib-target.c:217
msgid "target library list"
msgstr ""

#: solib-svr4.c:1314
#, possible-c-format
msgid "Corrupted shared library list: %s != %s"
msgstr ""

#: solib-svr4.c:1342
#, possible-c-format
msgid "Can't read pathname for load map: %s."
msgstr ""

#: solib-svr4.c:1864
msgid ""
"Probes-based dynamic linker interface failed.\n"
"Reverting to original interface."
msgstr ""

#: solib-svr4.c:2121
msgid ""
"Initializing probes-based dynamic linker interface failed.\n"
"Reverting to original interface."
msgstr ""

#. It can be printed repeatedly as there is no easy way to check
#. the executable symbols/file has been already relocated to
#. displacement.
#: solib-svr4.c:2904
#, possible-c-format
msgid ""
"Using PIE (Position Independent Executable) displacement %s for \"%s\".\n"
msgstr ""

#: solib-target.c:91 solib-target.c:110
msgid "Library list with both segments and sections"
msgstr ""

#: solib-target.c:140
msgid "No segment or section bases defined"
msgstr ""

#: solib-target.c:329
#, possible-c-format
msgid ""
"Could not relocate shared library \"%s\": wrong number of ALLOC sections"
msgstr ""

#: solib-target.c:373
#, possible-c-format
msgid "Could not relocate shared library \"%s\": no segments"
msgstr ""

#: solib-target.c:383
#, possible-c-format
msgid "Could not relocate shared library \"%s\": bad offsets"
msgstr ""

#: solib.c:104
#, possible-c-format
msgid ""
"The search path for loading non-absolute shared library symbol files is %s.\n"
msgstr ""

#: solib.c:505
#, possible-c-format
msgid "`%s': not in executable format: %s"
msgstr ""

#: solib.c:511
#, possible-c-format
msgid ""
"`%s': Shared library architecture %s is not compatible with target "
"architecture %s."
msgstr ""

#: solib.c:553
msgid "Shared library file name is too long."
msgstr ""

#: solib.c:558
#, possible-c-format
msgid "Can't find the file sections in `%s': %s"
msgstr ""

#: solib.c:705
#, possible-c-format
msgid "Error while reading shared library symbols for %s:\n"
msgstr ""

#: solib.c:883 solib.c:1336
msgid "Error while mapping shared library sections:\n"
msgstr ""

#: solib.c:900
#, possible-c-format
msgid ""
"Could not load shared library symbols for %s.\n"
"Do you need \"set solib-search-path\" or \"set sysroot\"?"
msgstr ""

#: solib.c:905
#, possible-c-format
msgid ""
"Could not load shared library symbols for %d libraries, e.g. %s.\n"
"Use the \"info sharedlibrary\" command to see the complete listing.\n"
"Do you need \"set solib-search-path\" or \"set sysroot\"?"
msgstr ""

#: solib.c:952
#, possible-c-format
msgid "Loading symbols for shared libraries: %s\n"
msgstr ""

#: solib.c:956 solib.c:1290
msgid "Loading symbols for shared libraries.\n"
msgstr ""

#: solib.c:1001
#, possible-c-format
msgid "Symbols already loaded for %s\n"
msgstr ""

#: solib.c:1116
msgid "No shared libraries matched.\n"
msgstr ""

#: solib.c:1118
msgid "No shared libraries loaded at this time.\n"
msgstr ""

#: solib.c:1123
msgid "(*): Shared library is missing debugging information.\n"
msgstr ""

#: solib.c:1419
#, possible-c-format
msgid "\"%s\" is deprecated, use \"%s\" instead."
msgstr ""

#: solib.c:1421
#, possible-c-format
msgid "sysroot set to \"%s\"."
msgstr ""

#: solib.c:1434
#, possible-c-format
msgid "Autoloading of shared library symbols is %s.\n"
msgstr ""

#: solib.c:1580
msgid "Load shared object library symbols for files matching REGEXP."
msgstr ""

#: solib.c:1582
msgid "Status of loaded shared object libraries."
msgstr ""

#: solib.c:1585
msgid "Unload all shared object library symbols."
msgstr ""

#: solib.c:1588
msgid "Set autoloading of shared library symbols."
msgstr ""

#: solib.c:1589
msgid "Show autoloading of shared library symbols."
msgstr ""

#: solib.c:1590
msgid ""
"If \"on\", symbols from all shared object libraries will be loaded\n"
"automatically when the inferior begins execution, when the dynamic linker\n"
"informs gdb that a new library has been loaded, or when attaching to the\n"
"inferior.  Otherwise, symbols must be loaded manually, using `sharedlibrary'."
msgstr ""

#: solib.c:1601
msgid "Set an alternate system root."
msgstr ""

#: solib.c:1602
msgid "Show the current system root."
msgstr ""

#: solib.c:1603
msgid ""
"The system root is used to load absolute shared library symbol files.\n"
"For other (relative) files, you can add directories using\n"
"`set solib-search-path'."
msgstr ""

#: solib.c:1617
msgid ""
"Set the search path for loading non-absolute shared library symbol files."
msgstr ""

#: solib.c:1619
msgid ""
"Show the search path for loading non-absolute shared library symbol files."
msgstr ""

#: solib.c:1621
msgid ""
"This takes precedence over the environment variables PATH and "
"LD_LIBRARY_PATH."
msgstr ""

#: source-cache.c:75
msgid "Source file is more recent than executable."
msgstr ""

#: source.c:97
#, possible-c-format
msgid "Number of source lines gdb will list by default is %s.\n"
msgstr ""

#: source.c:120
#, possible-c-format
msgid "Filenames are displayed as \"%s\".\n"
msgstr ""

#: source.c:322
msgid "Can't find a default source file"
msgstr ""

#: source.c:426
msgid "Reinitialize source path to empty? "
msgstr ""

#: source.c:650
msgid "No current source file.\n"
msgstr ""

#: source.c:655
#, possible-c-format
msgid "Current source file is %s\n"
msgstr ""

#: source.c:657
#, possible-c-format
msgid "Compilation directory is %s\n"
msgstr ""

#: source.c:659
#, possible-c-format
msgid "Located in %s\n"
msgstr ""

#: source.c:662
#, possible-c-format
msgid "Contains %d line%s.\n"
msgstr ""

#: source.c:665
#, possible-c-format
msgid "Source language is %s.\n"
msgstr ""

#: source.c:666
#, possible-c-format
msgid "Producer is %s.\n"
msgstr ""

#: source.c:669
#, possible-c-format
msgid "Compiled with %s debugging format.\n"
msgstr ""

#: source.c:671
#, possible-c-format
msgid "%s preprocessor macro info.\n"
msgstr ""

#: source.c:1182
msgid "invalid filename_display_string"
msgstr ""

#: source.c:1287
#, possible-c-format
msgid "Line number %d out of range; %s has %d lines."
msgstr ""

#: source.c:1426
msgid "No line number information available"
msgstr ""

#. Is there any case in which we get here, and have an address
#. which the user would want to see?  If we have debugging symbols
#. and no line numbers?
#: source.c:1486
#, possible-c-format
msgid "Line number %d is out of range for \"%s\".\n"
msgstr ""

#: source.c:1521
msgid "Expression not found"
msgstr ""

#: source.c:1581
msgid "Expression not found\n"
msgstr ""

#: source.c:1698
msgid "Too many arguments in command"
msgstr ""

#: source.c:1707
#, possible-c-format
msgid "Source path substitution rule matching `%s':\n"
msgstr ""

#: source.c:1709
msgid "List of all source path substitution rules:\n"
msgstr ""

#: source.c:1732 source.c:1783
msgid "Incorrect usage, too many arguments in command"
msgstr ""

#: source.c:1742
msgid "Delete all source path substitution rules? "
msgstr ""

#: source.c:1743
msgid "Canceled"
msgstr ""

#: source.c:1765
#, possible-c-format
msgid "No substitution rule defined for `%s'"
msgstr ""

#: source.c:1780
msgid "Incorrect usage, too few arguments in command"
msgstr ""

#: source.c:1786
msgid "First argument must be at least one character long"
msgstr ""

#: source.c:1847
msgid ""
"Add directory DIR to beginning of search path for source files.\n"
"Forget cached info on source file locations and line positions.\n"
"DIR can also be $cwd for the current working directory, or $cdir for the\n"
"directory in which the source file was compiled into object code.\n"
"With no argument, reset the search path to $cdir:$cwd, the default."
msgstr ""

#: source.c:1863
msgid "Set the search path for finding source files."
msgstr ""

#: source.c:1865
msgid "Show the search path for finding source files."
msgstr ""

#: source.c:1867
msgid ""
"$cwd in the path means the current working directory.\n"
"$cdir in the path means the compilation directory of the source file.\n"
"GDB ensures the search path always ends with $cdir:$cwd by\n"
"appending these directories if necessary.\n"
"Setting the value to an empty string sets it to $cdir:$cwd, the default."
msgstr ""

#: source.c:1878
msgid "Information about the current source file."
msgstr ""

#: source.c:1880
msgid ""
"Core addresses of the code for a source line.\n"
"Line can be specified as\n"
"  LINENUM, to list around that line in current file,\n"
"  FILE:LINENUM, to list around that line in that file,\n"
"  FUNCTION, to list around beginning of that function,\n"
"  FILE:FUNCTION, to distinguish among like-named static functions.\n"
"Default is to describe the last source line that was listed.\n"
"\n"
"This sets the default address for \"x\" to the line's first instruction\n"
"so that \"x/i\" suffices to start examining the machine code.\n"
"The address is also stored as the value of \"$_\"."
msgstr ""

#: source.c:1892
msgid ""
"Search for regular expression (see regex(3)) from last line listed.\n"
"The matching line number is also stored as the value of \"$_\"."
msgstr ""

#: source.c:1898
msgid ""
"Search backward for regular expression (see regex(3)) from last line "
"listed.\n"
"The matching line number is also stored as the value of \"$_\"."
msgstr ""

#: source.c:1903
msgid "Set number of source lines gdb will list by default."
msgstr ""

#: source.c:1904
msgid "Show number of source lines gdb will list by default."
msgstr ""

#: source.c:1905
msgid ""
"Use this to choose how many source lines the \"list\" displays (unless\n"
"the \"list\" argument explicitly specifies some other number).\n"
"A value of \"unlimited\", or zero, means there's no limit."
msgstr ""

#: source.c:1914
msgid ""
"Add a substitution rule to rewrite the source directories.\n"
"Usage: set substitute-path FROM TO\n"
"The rule is applied only if the directory name starts with FROM\n"
"directly followed by a directory separator.\n"
"If a substitution rule was previously set for FROM, the old rule\n"
"is replaced by the new one."
msgstr ""

#: source.c:1924
msgid ""
"Delete one or all substitution rules rewriting the source directories.\n"
"Usage: unset substitute-path [FROM]\n"
"Delete the rule for substituting FROM in source directories.  If FROM\n"
"is not specified, all substituting rules are deleted.\n"
"If the debugger cannot find a rule for FROM, it will display a warning."
msgstr ""

#: source.c:1933
msgid ""
"Show one or all substitution rules rewriting the source directories.\n"
"Usage: show substitute-path [FROM]\n"
"Print the rule for substituting FROM in source directories. If FROM\n"
"is not specified, print all substitution rules."
msgstr ""

#: source.c:1942
msgid "Set how to display filenames."
msgstr ""

#: source.c:1943
msgid "Show how to display filenames."
msgstr ""

#: source.c:1944
msgid ""
"filename-display can be:\n"
"  basename - display only basename of a filename\n"
"  relative - display a filename relative to the compilation directory\n"
"  absolute - display an absolute filename\n"
"By default, relative filenames are displayed."
msgstr ""

#: sparc-nat.c:229
msgid "Couldn't get floating-point registers"
msgstr ""

#: sparc-nat.c:242
msgid "Couldn't write floating-point registers"
msgstr ""

#: sparc-nat.c:288
msgid "Couldn't get StackGhost cookie"
msgstr ""

#: sparc-tdep.c:403
#, possible-c-format
msgid "sparc32_pseudo_register_name: bad register number %d"
msgstr ""

#: sparc-tdep.c:490
#, possible-c-format
msgid "sparc32_pseudo_register_type: bad register number %d"
msgstr ""

#: sparc64-linux-tdep.c:151
msgid "ADI disabled"
msgstr ""

#: sparc64-linux-tdep.c:157
msgid "ADI deferred mismatch"
msgstr ""

#: sparc64-linux-tdep.c:163
msgid "ADI precise mismatch"
msgstr ""

#: sparc64-tdep.c:355 sparc64-tdep.c:376
#, possible-c-format
msgid "Address at %s is not in ADI maps"
msgstr ""

#: sparc64-tdep.c:425 sparc64-tdep.c:443 sparc64-tdep.c:463 sparc64-tdep.c:499
msgid "No ADI information"
msgstr ""

#: sparc64-tdep.c:427 sparc64-tdep.c:445
#, possible-c-format
msgid "No ADI information at %s"
msgstr ""

#: sparc64-tdep.c:460 sparc64-tdep.c:496
msgid "ADI command requires a live process/thread"
msgstr ""

#: sparc64-tdep.c:477
msgid "Usage: adi examine|x[/COUNT] [ADDR]"
msgstr ""

#: sparc64-tdep.c:492
msgid "Usage: adi assign|a[/COUNT] ADDR = VERSION"
msgstr ""

#: sparc64-tdep.c:531
#, possible-c-format
msgid "Invalid ADI version tag %d"
msgstr ""

#: sparc64-tdep.c:542
msgid "ADI version related commands."
msgstr ""

#: sparc64-tdep.c:545
msgid "Examine ADI versions."
msgstr ""

#: sparc64-tdep.c:548
msgid "Assign ADI versions."
msgstr ""

#: sparc64-tdep.c:818
#, possible-c-format
msgid "sparc64_pseudo_register_name: bad register number %d"
msgstr ""

#: sparc64-tdep.c:858
#, possible-c-format
msgid "sparc64_pseudo_register_type: bad register number %d"
msgstr ""

#: stabsread.c:178
#, possible-c-format
msgid "invalid C++ abbreviation `%s'"
msgstr ""

#: stabsread.c:262
#, possible-c-format
msgid "Invalid symbol data: type number (%d,%d) out of range at symtab pos %d."
msgstr ""

#: stabsread.c:313
msgid "GDB internal error: bad real_filenum"
msgstr ""

#: stabsread.c:681
#, possible-c-format
msgid "Bad stabs string '%s'"
msgstr ""

#: stabsread.c:733
#, possible-c-format
msgid "Unknown C++ symbol name `%s'"
msgstr ""

#: stabsread.c:1488
msgid "couldn't parse type; debugger out of date?"
msgstr ""

#. Complain and keep going, so compilers can invent new
#. cross-reference types.
#: stabsread.c:1608
#, possible-c-format
msgid "Unrecognized cross-reference type `%c'"
msgstr ""

#: stabsread.c:1833
#, possible-c-format
msgid ""
"Prototyped function type didn't end arguments with `#':\n"
"%s"
msgstr ""

#: stabsread.c:1945
#, possible-c-format
msgid "invalid (minimal) member type data format at symtab pos %d."
msgstr ""

#: stabsread.c:2049
msgid "GDB internal error, type is NULL in stabsread.c."
msgstr ""

#: stabsread.c:2078
#, possible-c-format
msgid "Unknown builtin type %d"
msgstr ""

#: stabsread.c:2244
#, possible-c-format
msgid "Method has bad physname %s\n"
msgstr ""

#: stabsread.c:2433
#, possible-c-format
msgid "const/volatile indicator missing, got '%c'"
msgstr ""

#. error
#: stabsread.c:2516
#, possible-c-format
msgid "member function type missing, got '%c'"
msgstr ""

#: stabsread.c:2770
#, possible-c-format
msgid "C++ abbreviated type name unknown at symtab pos %d"
msgstr ""

#: stabsread.c:3130
#, possible-c-format
msgid "Unknown virtual character `%c' for baseclass"
msgstr ""

#: stabsread.c:3147
#, possible-c-format
msgid "Unknown visibility `%c' for baseclass"
msgstr ""

#. Virtual function table field not found.
#: stabsread.c:3255
#, possible-c-format
msgid "virtual function table pointer not found when defining class `%s'"
msgstr ""

#: stabsread.c:3367
#, possible-c-format
msgid "Unknown visibility `%c' for field"
msgstr ""

#: stabsread.c:3403
#, possible-c-format
msgid "struct/union type gets multiply defined: %s%s"
msgstr ""

#. Does this actually ever happen?  Is that why we are worrying
#. about dealing with it rather than just calling error_type?
#: stabsread.c:4194
#, possible-c-format
msgid "base type %d of range type is not defined"
msgstr ""

#. We should read at least the THIS parameter here.  Some broken stabs
#. output contained `(0,41),(0,42)=@s8;-16;,(0,43),(0,1);' where should
#. have been present ";-16,(0,43)" reference instead.  This way the
#. excessive ";" marker prematurely stops the parameters parsing.
#: stabsread.c:4235
msgid "Invalid (empty) method arguments"
msgstr ""

#: stabsread.c:4277
msgid "Invalid symbol data: common block within common block"
msgstr ""

#: stabsread.c:4302
msgid "ECOMM symbol unmatched by BCOMM"
msgstr ""

#: stabsread.c:4506
msgid "need a type name"
msgstr ""

#: stabsread.c:4531
#, possible-c-format
msgid "forward-referenced types left unresolved, type code %d."
msgstr ""

#: stabsread.c:4679
#, possible-c-format
msgid "%s: common block `%s' from global_sym_chain unresolved"
msgstr ""

#: stabsread.c:4761 stabsread.c:4766
#, possible-c-format
msgid "invalid symbol name \"%s\""
msgstr ""

#. show_cmd_cb
#: stack.c:143
msgid "Set printing of function arguments at function entry."
msgstr ""

#: stack.c:144
msgid "Show printing of function arguments at function entry."
msgstr ""

#: stack.c:145
msgid ""
"GDB can sometimes determine the values of function arguments at entry,\n"
"in addition to their current values.  This option tells GDB whether\n"
"to print the current value, the value at entry (marked as val@entry),\n"
"or both.  Note that one or both of these values may be <optimized out>."
msgstr ""

#. show_cmd_cb
#: stack.c:156
msgid "Set printing of non-scalar frame arguments."
msgstr ""

#: stack.c:157
msgid "Show printing of non-scalar frame arguments."
msgstr ""

#. show_cmd_cb
#: stack.c:165 stack.c:3615
msgid "Set whether to print frame arguments in raw form."
msgstr ""

#: stack.c:166 stack.c:3616
msgid "Show whether to print frame arguments in raw form."
msgstr ""

#: stack.c:167 stack.c:3617
msgid ""
"If set, frame arguments are printed in raw form, bypassing any\n"
"pretty-printers for that value."
msgstr ""

#. show_cmd_cb
#: stack.c:176
msgid "Set printing of frame information."
msgstr ""

#: stack.c:177
msgid "Show printing of frame information."
msgstr ""

#: stack.c:199
msgid "Print values of local variables."
msgstr ""

#: stack.c:205
msgid "Prohibit frame filters from executing on a backtrace."
msgstr ""

#: stack.c:211
msgid "Causes Python frame filter elided frames to not be printed."
msgstr ""

#: stack.c:949
#, possible-c-format
msgid "Debugger's willingness to use disassemble-next-line is %s.\n"
msgstr ""

#: stack.c:1527
#, possible-c-format
msgid "Stack level %d, frame at "
msgstr ""

#: stack.c:1532
msgid "Stack frame at "
msgstr ""

#: stack.c:1598
#, possible-c-format
msgid " Outermost frame: %s\n"
msgstr ""

#: stack.c:1882
#, possible-c-format
msgid "No frame at level %s."
msgstr ""

#: stack.c:1896
#, possible-c-format
msgid "No frame at address %s."
msgstr ""

#: stack.c:1910
msgid "Missing address argument to view a frame"
msgstr ""

#: stack.c:1938
msgid "Missing function name argument"
msgstr ""

#: stack.c:1941
#, possible-c-format
msgid "No frame for function \"%s\"."
msgstr ""

#: stack.c:2097
#, possible-c-format
msgid "Backtrace stopped: %s\n"
msgstr ""

#: stack.c:2416
msgid "PC unavailable, cannot determine locals.\n"
msgstr ""

#: stack.c:2448
msgid "No locals.\n"
msgstr ""

#: stack.c:2450
msgid "No matching locals.\n"
msgstr ""

#: stack.c:2590
msgid "PC unavailable, cannot determine args.\n"
msgstr ""

#: stack.c:2618
msgid "No arguments.\n"
msgstr ""

#: stack.c:2620
msgid "No matching arguments.\n"
msgstr ""

#: stack.c:2708
msgid "Initial frame selected; you cannot go up."
msgstr ""

#. We only do this if COUNT_EXP is not specified.  That way
#. "down" means to really go down (and let me know if that is
#. impossible), but "down 9999" can be used to mean go all the
#. way down without getting an error.
#: stack.c:2745
msgid "Bottom (innermost) frame selected; you cannot go down."
msgstr ""

#: stack.c:2781
msgid "Can not force return from an inlined function."
msgstr ""

#: stack.c:2804
msgid ""
"Return value type not available for selected stack frame.\n"
"Please use an explicit cast of the value to return."
msgstr ""

#: stack.c:2851
#, possible-c-format
msgid "%sMake selected stack frame return now? "
msgstr ""

#: stack.c:2856
msgid "Function does not return normally to caller."
msgstr ""

#: stack.c:2857
#, possible-c-format
msgid "%sMake %s return now? "
msgstr ""

#: stack.c:2861
msgid "Not confirmed"
msgstr ""

#: stack.c:2954
#, possible-c-format
msgid "'%s' not within current stack frame."
msgstr ""

#: stack.c:2971
msgid "Disables printing the frame location information."
msgstr ""

#: stack.c:2976 thread.c:1564
msgid "Print any error raised by COMMAND and continue."
msgstr ""

#: stack.c:2981 thread.c:1569
msgid "Silently ignore any errors or empty output produced by COMMAND."
msgstr ""

#: stack.c:3036
msgid "Please specify a command to apply on the selected frames"
msgstr ""

#: stack.c:3066 stack.c:3077
msgid "frame apply unable to get selected frame."
msgstr ""

#: stack.c:3214
msgid "Missing or invalid LEVEL... argument"
msgstr ""

#: stack.c:3262
msgid "Missing COUNT argument."
msgstr ""

#: stack.c:3265
msgid "Invalid COUNT argument."
msgstr ""

#: stack.c:3285
msgid "Please specify a command to apply on all frames"
msgstr ""

#: stack.c:3347
msgid ""
"Make selected stack frame return to its caller.\n"
"Control remains in the debugger, but when you continue\n"
"execution will resume in the frame above the one now selected.\n"
"If an argument is given, it is an expression for the value to return."
msgstr ""

#: stack.c:3353
msgid ""
"Select and print stack frame that called this one.\n"
"An argument says how many frames up to go."
msgstr ""

#: stack.c:3356
msgid ""
"Same as the `up' command, but does not print anything.\n"
"This is useful in command scripts."
msgstr ""

#: stack.c:3360
msgid ""
"Select and print stack frame called by this one.\n"
"An argument says how many frames down to go."
msgstr ""

#: stack.c:3365
msgid ""
"Same as the `down' command, but does not print anything.\n"
"This is useful in command scripts."
msgstr ""

#: stack.c:3370 stack.c:3436
msgid ""
"Select and print a stack frame.\n"
"With no argument, print the selected stack frame.  (See also \"info frame"
"\").\n"
"A single numerical argument specifies the frame to select."
msgstr ""

#: stack.c:3390
msgid ""
"Apply a command to a number of frames.\n"
"Usage: frame apply COUNT [OPTION]... COMMAND\n"
"With a negative COUNT argument, applies the command on outermost -COUNT "
"frames.\n"
msgstr ""

#: stack.c:3403
msgid ""
"Apply a command to all frames.\n"
"\n"
"Usage: frame apply all [OPTION]... COMMAND\n"
msgstr ""

#: stack.c:3415
msgid ""
"Apply a command to a list of frames.\n"
"\n"
"Usage: frame apply level LEVEL... [OPTION]... COMMAND\n"
"LEVEL is a space-separated list of levels of frames to apply COMMAND on.\n"
msgstr ""

#: stack.c:3428
msgid ""
"Apply a command to all frames (ignoring errors and empty output).\n"
"Usage: faas [OPTION]... COMMAND\n"
"shortcut for 'frame apply all -s [OPTION]... COMMAND'\n"
"See \"help frame apply all\" for available options."
msgstr ""

#: stack.c:3444
msgid ""
"Select and print a stack frame by stack address.\n"
"\n"
"Usage: frame address STACK-ADDRESS"
msgstr ""

#: stack.c:3451
msgid ""
"View a stack frame that might be outside the current backtrace.\n"
"\n"
"Usage: frame view STACK-ADDRESS\n"
"       frame view STACK-ADDRESS PC-ADDRESS"
msgstr ""

#: stack.c:3459
msgid ""
"Select and print a stack frame by function name.\n"
"\n"
"Usage: frame function NAME\n"
"\n"
"The innermost frame that visited function NAME is selected."
msgstr ""

#: stack.c:3470
msgid ""
"Select and print a stack frame by level.\n"
"\n"
"Usage: frame level LEVEL"
msgstr ""

#: stack.c:3477
msgid ""
"Select a stack frame without printing anything.\n"
"A single numerical argument specifies the frame to select."
msgstr ""

#: stack.c:3484
msgid ""
"Select a stack frame by stack address.\n"
"\n"
"Usage: select-frame address STACK-ADDRESS"
msgstr ""

#: stack.c:3493
msgid ""
"Select a stack frame that might be outside the current backtrace.\n"
"\n"
"Usage: select-frame view STACK-ADDRESS\n"
"       select-frame view STACK-ADDRESS PC-ADDRESS"
msgstr ""

#: stack.c:3502
msgid ""
"Select a stack frame by function name.\n"
"\n"
"Usage: select-frame function NAME"
msgstr ""

#: stack.c:3511
msgid ""
"Select a stack frame by level.\n"
"\n"
"Usage: select-frame level LEVEL"
msgstr ""

#: stack.c:3522
msgid ""
"Print backtrace of all stack frames, or innermost COUNT frames.\n"
"Usage: backtrace [OPTION]... [QUALIFIER]... [COUNT | -COUNT]\n"
"\n"
"Options:\n"
"%OPTIONS%\n"
"\n"
"For backward compatibility, the following qualifiers are supported:\n"
"\n"
"   full       - same as -full option.\n"
"   no-filters - same as -no-filters option.\n"
"   hide       - same as -hide.\n"
"\n"
"With a negative COUNT, print outermost -COUNT frames."
msgstr ""

#: stack.c:3547
msgid "Backtrace of the stack, or innermost COUNT frames."
msgstr ""

#: stack.c:3551
msgid ""
"All about the selected stack frame.\n"
"With no arguments, displays information about the currently selected stack\n"
"frame.  Alternatively a frame specification may be provided (See \"frame\")\n"
"the information is then printed about the specified frame."
msgstr ""

#: stack.c:3559
msgid ""
"Print information about a stack frame selected by stack address.\n"
"\n"
"Usage: info frame address STACK-ADDRESS"
msgstr ""

#: stack.c:3566
msgid ""
"Print information about a stack frame outside the current backtrace.\n"
"\n"
"Usage: info frame view STACK-ADDRESS\n"
"       info frame view STACK-ADDRESS PC-ADDRESS"
msgstr ""

#: stack.c:3574
msgid ""
"Print information about a stack frame selected by function name.\n"
"\n"
"Usage: info frame function NAME"
msgstr ""

#: stack.c:3582
msgid ""
"Print information about a stack frame selected by level.\n"
"\n"
"Usage: info frame level LEVEL"
msgstr ""

#: stack.c:3589
msgid ""
"All local variables of current stack frame or those matching REGEXPs.\n"
"Usage: info locals [-q] [-t TYPEREGEXP] [NAMEREGEXP]\n"
"Prints the local variables of the current stack frame.\n"
msgstr ""

#: stack.c:3593
msgid "local variables"
msgstr ""

#: stack.c:3597
msgid ""
"All argument variables of current stack frame or those matching REGEXPs.\n"
"Usage: info args [-q] [-t TYPEREGEXP] [NAMEREGEXP]\n"
"Prints the argument variables of the current stack frame.\n"
msgstr ""

#: stack.c:3601
msgid "argument variables"
msgstr ""

#: stack.c:3606
msgid ""
"Select the stack frame that contains NAME.\n"
"Usage: func NAME"
msgstr ""

#: stack.c:3625
msgid ""
"Set whether to disassemble next source line or insn when execution stops."
msgstr ""

#: stack.c:3627
msgid ""
"Show whether to disassemble next source line or insn when execution stops."
msgstr ""

#: stack.c:3629
msgid ""
"If ON, GDB will display disassembly of the next source line, in addition\n"
"to displaying the source line itself.  If the next source line cannot\n"
"be displayed (e.g., source is unavailable or there's no line info), GDB\n"
"will display disassembly of next instruction instead of showing the\n"
"source line.\n"
"If AUTO, display disassembly of next instruction only if the source line\n"
"cannot be displayed.\n"
"If OFF (which is the default), never display the disassembly of the next\n"
"source line."
msgstr ""

#: stap-probe.c:186
#, possible-c-format
msgid ""
"Probe '%s' apparently does not have arguments, but \n"
"GDB is requesting its argument number %u anyway.  This should not happen.  "
"Please report this bug."
msgstr ""

#: stap-probe.c:278
#, possible-c-format
msgid "SystemTap Probe expression debugging is %s.\n"
msgstr ""

#: stap-probe.c:423
#, possible-c-format
msgid "Invalid opcode in expression `%s' for SystemTapprobe"
msgstr ""

#: stap-probe.c:472
#, possible-c-format
msgid "Undefined bitness for probe '%s'."
msgstr ""

#: stap-probe.c:742
#, possible-c-format
msgid "Invalid register displacement syntax on expression `%s'."
msgstr ""

#: stap-probe.c:795
#, possible-c-format
msgid "Invalid register name '%s' after replacing it (previous name was '%s')"
msgstr ""

#: stap-probe.c:826
#, possible-c-format
msgid "Missing register name suffix on expression `%s'."
msgstr ""

#: stap-probe.c:836
#, possible-c-format
msgid "Missing indirection suffix on expression `%s'."
msgstr ""

#: stap-probe.c:912
#, possible-c-format
msgid "Invalid operator `%c' for register displacement on expression `%s'."
msgstr ""

#: stap-probe.c:965 stap-probe.c:993
#, possible-c-format
msgid "Invalid constant suffix on expression `%s'."
msgstr ""

#: stap-probe.c:971
#, possible-c-format
msgid "Unknown numeric token on expression `%s'."
msgstr ""

#: stap-probe.c:1000
#, possible-c-format
msgid "Operator `%c' not recognized on expression `%s'."
msgstr ""

#: stap-probe.c:1032
#, possible-c-format
msgid "Missign close-paren on expression `%s'."
msgstr ""

#: stap-probe.c:1040
#, possible-c-format
msgid "Cannot parse expression `%s'."
msgstr ""

#: stap-probe.c:1083
#, possible-c-format
msgid "Invalid operator `%c' on expression `%s'."
msgstr ""

#. We have an error, because we don't expect anything
#. except 1, 2, 4 and 8.
#: stap-probe.c:1254
#, possible-c-format
msgid "unrecognized bitness %s%c' for probe `%s'"
msgstr ""

#: stap-probe.c:1322
msgid ""
"The SystemTap SDT probe support is not fully implemented on this target;\n"
"you will not be able to inspect the arguments of the probes.\n"
"Please report a bug against GDB requesting a port to this target."
msgstr ""

#: stap-probe.c:1440
msgid "Could not read the value of a SystemTap semaphore."
msgstr ""

#: stap-probe.c:1456
msgid "Could not write the value of a SystemTap semaphore."
msgstr ""

#: stap-probe.c:1531
#, possible-c-format
msgid "corrupt probe name when reading `%s'"
msgstr ""

#: stap-probe.c:1567
#, possible-c-format
msgid "corrupt probe argument when reading `%s'"
msgstr ""

#: stap-probe.c:1607
#, possible-c-format
msgid "could not obtain base address for SystemTap section on objfile `%s'."
msgstr ""

#. If we are here, it means we have failed to parse every known
#. probe.
#: stap-probe.c:1678
msgid "could not parse SystemTap probe(s) from inferior"
msgstr ""

#: stap-probe.c:1699
msgid "Semaphore"
msgstr ""

#: stap-probe.c:1719
msgid "Set SystemTap expression debugging."
msgstr ""

#: stap-probe.c:1720
msgid "Show SystemTap expression debugging."
msgstr ""

#: stap-probe.c:1721
msgid ""
"When non-zero, the internal representation of SystemTap expressions will be "
"printed."
msgstr ""

#: stap-probe.c:1728
msgid ""
"Show information about SystemTap static probes.\n"
"Usage: info probes stap [PROVIDER [NAME [OBJECT]]]\n"
"Each argument is a regular expression, used to select probes.\n"
"PROVIDER matches probe provider names.\n"
"NAME matches the probe names.\n"
"OBJECT matches the executable or shared library name."
msgstr ""

#: std-regs.c:81
msgid "Standard register ``$sp'' is not available for this target"
msgstr ""

#: std-regs.c:91
msgid "Standard register ``$ps'' is not available for this target"
msgstr ""

#: symfile-debug.c:645
#, possible-c-format
msgid "Symfile debugging is %s.\n"
msgstr ""

#: symfile-debug.c:651
msgid "Set debugging of the symfile functions."
msgstr ""

#: symfile-debug.c:652
msgid "Show debugging of the symfile functions."
msgstr ""

#: symfile-debug.c:653
msgid "When enabled, all calls to the symfile functions are logged."
msgstr ""

#: symfile-mem.c:94
msgid "add-symbol-file-from-memory not supported for this target"
msgstr ""

#: symfile-mem.c:99
msgid "Failed to read a valid object file image from memory."
msgstr ""

#: symfile-mem.c:109
#, possible-c-format
msgid "Got object file from memory but can't read symbols: %s."
msgstr ""

#: symfile-mem.c:141
msgid "add-symbol-file-from-memory requires an expression argument"
msgstr ""

#: symfile-mem.c:151
msgid "Must use symbol-file or exec-file before add-symbol-file-from-memory."
msgstr ""

#: symfile-mem.c:181
msgid "Could not load vsyscall page because no executable was specified"
msgstr ""

#: symfile-mem.c:211
msgid ""
"Load the symbols out of memory from a dynamically loaded object file.\n"
"Give an expression for the address of the file's shared object file header."
msgstr ""

#: symfile.c:507
#, possible-c-format
msgid "no loadable sections found in added symbol-file %s"
msgstr ""

#: symfile.c:620
#, possible-c-format
msgid "section %s not found in %s"
msgstr ""

#: symfile.c:1091
#, possible-c-format
msgid "Load new symbol table from \"%s\"? "
msgstr ""

#: symfile.c:1109
#, possible-c-format
msgid "Reading symbols from %ps...\n"
msgstr ""

#: symfile.c:1122
#, possible-c-format
msgid "Expanding full symbols from %ps...\n"
msgstr ""

#: symfile.c:1135
#, possible-c-format
msgid "(No debugging symbols found in %ps)\n"
msgstr ""

#: symfile.c:1248
#, possible-c-format
msgid "Discard symbol table from `%s'? "
msgstr ""

#: symfile.c:1250
msgid "Discard symbol table? "
msgstr ""

#: symfile.c:1261
msgid "No symbol file now.\n"
msgstr ""

#: symfile.c:1321
msgid " no, same file as the objfile.\n"
msgstr ""

#: symfile.c:1335 symfile.c:1353
msgid " no, error computing CRC.\n"
msgstr ""

#: symfile.c:1360
#, possible-c-format
msgid ""
"the debug information found in \"%s\" does not match \"%s\" (CRC mismatch).\n"
msgstr ""

#: symfile.c:1365
msgid " no, CRC doesn't match.\n"
msgstr ""

#: symfile.c:1382
#, possible-c-format
msgid ""
"The directory where separate debug symbols are searched for is \"%s\".\n"
msgstr ""

#: symfile.c:1406
#, possible-c-format
msgid ""
"\n"
"Looking for separate debug info (debug link) for %s\n"
msgstr ""

#: symfile.c:1593
msgid "-readnow and -readnever cannot be used simultaneously"
msgstr ""

#: symfile.c:1640 symfile.c:1657 symfile.c:2269 symfile.c:2299
#, possible-c-format
msgid "Unrecognized argument \"%s\""
msgstr ""

#: symfile.c:1650 symfile.c:2291
msgid "Missing argument to -o"
msgstr ""

#: symfile.c:1661
msgid "no symbol file name was specified"
msgstr ""

#: symfile.c:1812
#, possible-c-format
msgid "I'm sorry, Dave, I can't do that.  Symbol format `%s' unknown."
msgstr ""

#: symfile.c:1971
#, possible-c-format
msgid "Download verify read failed at %s"
msgstr ""

#: symfile.c:1974
#, possible-c-format
msgid "Download verify compare failed at %s"
msgstr ""

#: symfile.c:1986
msgid "Canceled the download"
msgstr ""

#: symfile.c:2038
msgid "file to load"
msgstr ""

#: symfile.c:2053
#, possible-c-format
msgid "Invalid download offset:%s."
msgstr ""

#: symfile.c:2056
msgid "Too many parameters."
msgstr ""

#: symfile.c:2066
#, possible-c-format
msgid "\"%s\" is not an object file: %s"
msgstr ""

#: symfile.c:2081
msgid "Load failed"
msgstr ""

#: symfile.c:2246
msgid "add-symbol-file takes a file name and an address"
msgstr ""

#: symfile.c:2278
msgid "Missing section name after \"-s\""
msgstr ""

#: symfile.c:2280
msgid "Missing section address after \"-s\""
msgstr ""

#: symfile.c:2303
msgid "You must provide a filename to be loaded."
msgstr ""

#. Print the prompt for the query below.  And save the arguments into
#. a sect_addr_info structure to be passed around to other
#. functions.  We have to split this up into separate print
#. statements because hex_string returns a local static
#. string.
#: symfile.c:2313
#, possible-c-format
msgid "add symbol table from file \"%s\""
msgstr ""

#: symfile.c:2326
msgid " at\n"
msgstr ""

#: symfile.c:2346
#, possible-c-format
msgid "%s offset by %s\n"
msgstr ""

#: symfile.c:2348
msgid " with all sections"
msgstr ""

#: symfile.c:2349
msgid "with other sections"
msgstr ""

#: symfile.c:2360
#, possible-c-format
msgid "newly-added symbol file \"%s\" does not provide any symbols"
msgstr ""

#: symfile.c:2385
msgid "remove-symbol-file: no symbol file provided"
msgstr ""

#: symfile.c:2395
msgid "Missing address argument"
msgstr ""

#: symfile.c:2398 symfile.c:2419
#, possible-c-format
msgid "Junk after %s"
msgstr ""

#: symfile.c:2437
msgid "No symbol file found"
msgstr ""

#: symfile.c:2440
#, possible-c-format
msgid "Remove symbol table from file \"%s\"? "
msgstr ""

#. FIXME, should use print_sys_errmsg but it's not filtered.
#: symfile.c:2478
#, possible-c-format
msgid "`%s' has disappeared; keeping its symbols.\n"
msgstr ""

#: symfile.c:2488
#, possible-c-format
msgid "`%s' has changed; re-reading symbols.\n"
msgstr ""

#: symfile.c:2552
#, possible-c-format
msgid "Can't open %s to read symbols."
msgstr ""

#: symfile.c:2559
#, possible-c-format
msgid "Can't read symbols from %s: %s."
msgstr ""

#: symfile.c:2644
msgid "(no debugging symbols found)\n"
msgstr ""

#: symfile.c:2713
#, possible-c-format
msgid "Mapping between filename extension and source language is \"%s\".\n"
msgstr ""

#: symfile.c:2727
#, possible-c-format
msgid "'%s': Filename extension must begin with '.'"
msgstr ""

#: symfile.c:2734 symfile.c:2745
#, possible-c-format
msgid "'%s': two arguments required -- filename extension and language"
msgstr ""

#: symfile.c:2780
msgid "Filename extensions and the languages they represent:"
msgstr ""

#: symfile.c:3262
msgid "No sections are mapped.\n"
msgstr ""

#: symfile.c:3274 symfile.c:3320
msgid ""
"Overlay debugging not enabled.  Use either the 'overlay auto' or\n"
"the 'overlay manual' command."
msgstr ""

#: symfile.c:3279 symfile.c:3325
msgid "Argument required: name of an overlay section"
msgstr ""

#: symfile.c:3301
#, possible-c-format
msgid "Note: section %s unmapped by overlap\n"
msgstr ""

#: symfile.c:3307 symfile.c:3337
#, possible-c-format
msgid "No overlay section called %s"
msgstr ""

#: symfile.c:3333
#, possible-c-format
msgid "Section %s is not mapped"
msgstr ""

#: symfile.c:3350
msgid "Automatic overlay debugging enabled."
msgstr ""

#: symfile.c:3363
msgid "Overlay debugging enabled."
msgstr ""

#: symfile.c:3376
msgid "Overlay debugging disabled."
msgstr ""

#: symfile.c:3387
msgid "This target does not know how to read its overlay state."
msgstr ""

#: symfile.c:3490
msgid ""
"Error reading inferior's overlay table: couldn't find `_novlys' variable\n"
"in inferior.  Use `overlay manual' mode."
msgstr ""

#: symfile.c:3499 symfile.c:3579
msgid ""
"Error reading inferior's overlay table: couldn't find `_ovly_table' array\n"
"in inferior.  Use `overlay manual' mode."
msgstr ""

#: symfile.c:3914
msgid ""
"Load symbol table from executable file FILE.\n"
"Usage: symbol-file [-readnow | -readnever] [-o OFF] FILE\n"
"OFF is an optional offset which is added to each section address.\n"
"The `file' command can also load symbol tables, as well as setting the file\n"
"to execute.\n"
msgstr ""

#: symfile.c:3922
msgid ""
"Load symbols from FILE, assuming FILE has been dynamically loaded.\n"
"Usage: add-symbol-file FILE [-readnow | -readnever] [-o OFF] [ADDR] [-s SECT-"
"NAME SECT-ADDR]...\n"
"ADDR is the starting address of the file's text.\n"
"Each '-s' argument provides a section name and address, and\n"
"should be specified if the data and bss segments are not contiguous\n"
"with the text.  SECT-NAME is a section name to be loaded at SECT-ADDR.\n"
"OFF is an optional offset which is added to the default load addresses\n"
"of all sections for which no other address was specified.\n"
msgstr ""

#: symfile.c:3937
msgid ""
"Remove a symbol file added via the add-symbol-file command.\n"
"Usage: remove-symbol-file FILENAME\n"
"       remove-symbol-file -a ADDRESS\n"
"The file to remove can be identified by its filename or by an address\n"
"that lies within the boundaries of this symbol file in memory."
msgstr ""

#: symfile.c:3945
msgid ""
"Dynamically load FILE into the running program.\n"
"FILE symbols are recorded for access from GDB.\n"
"Usage: load [FILE] [OFFSET]\n"
"An optional load OFFSET may also be given as a literal address.\n"
"When OFFSET is provided, FILE must also be provided.  FILE can be provided\n"
"on its own."
msgstr ""

#: symfile.c:3955
msgid "Commands for debugging overlays."
msgstr ""

#: symfile.c:3962
msgid "Assert that an overlay section is mapped."
msgstr ""

#: symfile.c:3965
msgid "Assert that an overlay section is unmapped."
msgstr ""

#: symfile.c:3968
msgid "List mappings of overlay sections."
msgstr ""

#: symfile.c:3971
msgid "Enable overlay debugging."
msgstr ""

#: symfile.c:3973
msgid "Disable overlay debugging."
msgstr ""

#: symfile.c:3975
msgid "Enable automatic overlay debugging."
msgstr ""

#: symfile.c:3977
msgid "Read the overlay mapping state from the target."
msgstr ""

#: symfile.c:3981
msgid "Set mapping between filename extension and source language."
msgstr ""

#: symfile.c:3982
msgid "Show mapping between filename extension and source language."
msgstr ""

#: symfile.c:3983
msgid "Usage: set extension-language .foo bar"
msgstr ""

#: symfile.c:3990
msgid "All filename extensions associated with a source language."
msgstr ""

#: symfile.c:3993
msgid "Set the directories where separate debug symbols are searched for."
msgstr ""

#: symfile.c:3994
msgid "Show the directories where separate debug symbols are searched for."
msgstr ""

#: symfile.c:3995
msgid ""
"Separate debug symbols are first searched for in the same\n"
"directory as the binary, then in the `"
msgstr ""

#: symfile.c:4006
msgid "Set printing of symbol loading messages."
msgstr ""

#: symfile.c:4007
msgid "Show printing of symbol loading messages."
msgstr ""

#: symfile.c:4008
msgid ""
"off   == turn all messages off\n"
"brief == print messages for the executable,\n"
"         and brief messages for shared libraries\n"
"full  == print messages for the executable,\n"
"         and messages for each shared library."
msgstr ""

#: symfile.c:4019
msgid "Set printing of separate debug info file search debug."
msgstr ""

#: symfile.c:4020
msgid "Show printing of separate debug info file search debug."
msgstr ""

#: symfile.c:4021
msgid ""
"When on, GDB prints the searched locations while looking for separate debug "
"info files."
msgstr ""

#: symmisc.c:70
#, possible-c-format
msgid "Byte cache statistics for '%s':\n"
msgstr ""

#: symmisc.c:90
#, possible-c-format
msgid "Statistics for '%s':\n"
msgstr ""

#: symmisc.c:92
#, possible-c-format
msgid "  Number of \"stab\" symbols read: %d\n"
msgstr ""

#: symmisc.c:95
#, possible-c-format
msgid "  Number of \"minimal\" symbols read: %d\n"
msgstr ""

#: symmisc.c:98
#, possible-c-format
msgid "  Number of \"partial\" symbols read: %d\n"
msgstr ""

#: symmisc.c:101
#, possible-c-format
msgid "  Number of \"full\" symbols read: %d\n"
msgstr ""

#: symmisc.c:104
#, possible-c-format
msgid "  Number of \"types\" defined: %d\n"
msgstr ""

#: symmisc.c:120
#, possible-c-format
msgid "  Number of symbol tables: %d\n"
msgstr ""

#: symmisc.c:121
#, possible-c-format
msgid "  Number of symbol tables with line tables: %d\n"
msgstr ""

#: symmisc.c:123
#, possible-c-format
msgid "  Number of symbol tables with blockvectors: %d\n"
msgstr ""

#: symmisc.c:127
#, possible-c-format
msgid "  Space used by string tables: %d\n"
msgstr ""

#: symmisc.c:129
#, possible-c-format
msgid "  Total memory used for objfile obstack: %s\n"
msgstr ""

#: symmisc.c:132
#, possible-c-format
msgid "  Total memory used for BFD obstack: %s\n"
msgstr ""

#: symmisc.c:136
#, possible-c-format
msgid "  Total memory used for psymbol cache: %d\n"
msgstr ""

#: symmisc.c:138
#, possible-c-format
msgid "  Total memory used for macro cache: %d\n"
msgstr ""

#: symmisc.c:140
#, possible-c-format
msgid "  Total memory used for file name cache: %d\n"
msgstr ""

#: symmisc.c:267
#, possible-c-format
msgid "internal error:  minimal symbol count %d != %d"
msgstr ""

#: symmisc.c:466
#, possible-c-format
msgid "No symtab for address: %s"
msgstr ""

#: symmisc.c:506
#, possible-c-format
msgid "No symtab for source file: %s"
msgstr ""

#: symmisc.c:915
msgid "Extra arguments after regexp."
msgstr ""

#: symmisc.c:973
#, possible-c-format
msgid "objfile: %s ((struct objfile *) %s)\n"
msgstr ""

#: symmisc.c:976
#, possible-c-format
msgid "compunit_symtab: ((struct compunit_symtab *) %s)\n"
msgstr ""

#: symmisc.c:978
#, possible-c-format
msgid "symtab: %s ((struct symtab *) %s)\n"
msgstr ""

#: symmisc.c:982
#, possible-c-format
msgid "linetable: ((struct linetable *) %s):\n"
msgstr ""

#: symmisc.c:986
msgid "No line table.\n"
msgstr ""

#: symmisc.c:988
msgid "Line table has no lines.\n"
msgstr ""

#. Leave space for 6 digits of index and line number.  After that the
#. tables will just not format as well.
#: symmisc.c:995
#, possible-c-format
msgid "%-6s %6s %s\n"
msgstr ""

#: symmisc.c:996
msgid "INDEX"
msgstr ""

#: symmisc.c:996
msgid "LINE"
msgstr ""

#: symmisc.c:996
msgid "ADDRESS"
msgstr ""

#: symmisc.c:1003
#, possible-c-format
msgid "%-6d %6d %s\n"
msgstr ""

#: symmisc.c:1051
msgid ""
"Print dump of current symbol definitions.\n"
"Usage: mt print symbols [-pc ADDRESS] [--] [OUTFILE]\n"
"       mt print symbols [-objfile OBJFILE] [-source SOURCE] [--] [OUTFILE]\n"
"Entries in the full symbol table are dumped to file OUTFILE,\n"
"or the terminal if OUTFILE is unspecified.\n"
"If ADDRESS is provided, dump only the file for that address.\n"
"If SOURCE is provided, dump only that file's symbols.\n"
"If OBJFILE is provided, dump only that file's minimal symbols."
msgstr ""

#: symmisc.c:1062
msgid ""
"Print dump of current minimal symbol definitions.\n"
"Usage: mt print msymbols [-objfile OBJFILE] [--] [OUTFILE]\n"
"Entries in the minimal symbol table are dumped to file OUTFILE,\n"
"or the terminal if OUTFILE is unspecified.\n"
"If OBJFILE is provided, dump only that file's minimal symbols."
msgstr ""

#: symmisc.c:1071
msgid ""
"Print dump of current object file definitions.\n"
"With an argument REGEXP, list the object files with matching names."
msgstr ""

#: symmisc.c:1075
msgid ""
"List the full symbol tables for all object files.\n"
"This does not include information about individual symbols, blocks, or\n"
"linetables --- just the symbol table structures themselves.\n"
"With an argument REGEXP, list the symbol tables with matching names."
msgstr ""

#: symmisc.c:1082
msgid ""
"List the contents of all line tables, from all symbol tables.\n"
"With an argument REGEXP, list just the line tables for the symbol\n"
"tables with matching names."
msgstr ""

#: symmisc.c:1089
msgid "Check consistency of currently expanded symtabs."
msgstr ""

#: symmisc.c:1094
msgid ""
"Expand symbol tables.\n"
"With an argument REGEXP, only expand the symbol tables with matching names."
msgstr ""

#: symtab.c:1327
#, possible-c-format
msgid "Symbol cache size is too large, max is %u."
msgstr ""

#: symtab.c:1559
#, possible-c-format
msgid ""
"Symbol cache for pspace %d\n"
"%s:\n"
msgstr ""

#: symtab.c:1630
#, possible-c-format
msgid ""
"Symbol cache statistics for pspace %d\n"
"%s:\n"
msgstr ""

#: symtab.c:2102
#, possible-c-format
msgid "Internal error: `%s' is not an aggregate"
msgstr ""

#: symtab.c:2373
#, possible-c-format
msgid ""
"Internal: %s symbol `%s' found in %s psymtab but not in symtab.\n"
"%s may be an inlined function, or may be a template function\n"
"\t (if a template, try specifying an instantiation: %s<type>)."
msgstr ""

#: symtab.c:4050
msgid "mismatched quoting on brackets, try 'operator\\[\\]'"
msgstr ""

#: symtab.c:4058
msgid "nothing is allowed between '[' and ']'"
msgstr ""

#: symtab.c:4114
msgid "`operator ()' must be specified without whitespace in `()'"
msgstr ""

#: symtab.c:4120
msgid "`operator ?:' must be specified without whitespace in `?:'"
msgstr ""

#: symtab.c:4126
msgid "`operator []' must be specified without whitespace in `[]'"
msgstr ""

#: symtab.c:4131
#, possible-c-format
msgid "`operator %s' not supported"
msgstr ""

#: symtab.c:4240
msgid "Show only the files having a dirname matching REGEXP."
msgstr ""

#: symtab.c:4246
msgid "Show only the files having a basename matching REGEXP."
msgstr ""

#: symtab.c:4273
#, possible-c-format
msgid "(dirname matching regular expression \"%s\")"
msgstr ""

#: symtab.c:4276
#, possible-c-format
msgid "(basename matching regular expression \"%s\")"
msgstr ""

#: symtab.c:4279
#, possible-c-format
msgid "(filename matching regular expression \"%s\")"
msgstr ""

#: symtab.c:4322
msgid "You cannot give both -basename and -dirname to 'info sources'."
msgstr ""

#: symtab.c:4325
msgid "Missing REGEXP for 'info sources'."
msgstr ""

#: symtab.c:4340
msgid "Source files for which symbols have been read in:\n"
msgstr ""

#: symtab.c:4357
msgid "Source files for which symbols will be read in on demand:\n"
msgstr ""

#: symtab.c:4854
#, possible-c-format
msgid ""
"\n"
"File %ps:\n"
msgstr ""

#: symtab.c:4890
#, possible-c-format
msgid "%ps  %ps\n"
msgstr ""

#: symtab.c:4926
#, possible-c-format
msgid ""
"All %ss matching regular expression \"%s\" with type matching regular "
"expression \"%s\":\n"
msgstr ""

#: symtab.c:4930
#, possible-c-format
msgid "All %ss matching regular expression \"%s\":\n"
msgstr ""

#: symtab.c:4937
#, possible-c-format
msgid "All defined %ss with type matching regular expression \"%s\" :\n"
msgstr ""

#: symtab.c:4941
#, possible-c-format
msgid "All defined %ss:\n"
msgstr ""

#: symtab.c:4954
msgid ""
"\n"
"Non-debugging symbols:\n"
msgstr ""

#: symtab.c:6466
msgid "All variables in all modules:"
msgstr ""

#: symtab.c:6467
msgid "All functions in all modules:"
msgstr ""

#: symtab.c:6471
#, possible-c-format
msgid "All variables matching regular expression \"%s\" in all modules:"
msgstr ""

#: symtab.c:6473
#, possible-c-format
msgid "All functions matching regular expression \"%s\" in all modules:"
msgstr ""

#: symtab.c:6482
#, possible-c-format
msgid ""
"All variables with type matching regular expression \"%s\" in all modules:"
msgstr ""

#: symtab.c:6484
#, possible-c-format
msgid ""
"All functions with type matching regular expression \"%s\" in all modules:"
msgstr ""

#: symtab.c:6490
#, possible-c-format
msgid ""
"All variables matching regular expression \"%s\",\n"
"\twith type matching regular expression \"%s\" in all modules:"
msgstr ""

#: symtab.c:6493
#, possible-c-format
msgid ""
"All functions matching regular expression \"%s\",\n"
"\twith type matching regular expression \"%s\" in all modules:"
msgstr ""

#: symtab.c:6506
#, possible-c-format
msgid "All variables in all modules matching regular expression \"%s\":"
msgstr ""

#: symtab.c:6508
#, possible-c-format
msgid "All functions in all modules matching regular expression \"%s\":"
msgstr ""

#: symtab.c:6514
#, possible-c-format
msgid ""
"All variables matching regular expression \"%s\",\n"
"\tin all modules matching regular expression \"%s\":"
msgstr ""

#: symtab.c:6517
#, possible-c-format
msgid ""
"All functions matching regular expression \"%s\",\n"
"\tin all modules matching regular expression \"%s\":"
msgstr ""

#: symtab.c:6527
#, possible-c-format
msgid ""
"All variables with type matching regular expression \"%s\"\n"
"\tin all modules matching regular expression \"%s\":"
msgstr ""

#: symtab.c:6530
#, possible-c-format
msgid ""
"All functions with type matching regular expression \"%s\"\n"
"\tin all modules matching regular expression \"%s\":"
msgstr ""

#: symtab.c:6537
#, possible-c-format
msgid ""
"All variables matching regular expression \"%s\",\n"
"\twith type matching regular expression \"%s\",\n"
"\tin all modules matching regular expression \"%s\":"
msgstr ""

#: symtab.c:6541
#, possible-c-format
msgid ""
"All functions matching regular expression \"%s\",\n"
"\twith type matching regular expression \"%s\",\n"
"\tin all modules matching regular expression \"%s\":"
msgstr ""

#: symtab.c:6580
#, possible-c-format
msgid "Module \"%s\":\n"
msgstr ""

#: symtab.c:6702
msgid ""
"All global and static variable names or those matching REGEXPs.\n"
"Usage: info variables [-q] [-n] [-t TYPEREGEXP] [NAMEREGEXP]\n"
"Prints the global and static variables.\n"
msgstr ""

#: symtab.c:6706 symtab.c:6716
msgid "global and static variables"
msgstr ""

#: symtab.c:6712
msgid ""
"All global and static variable names, or those matching REGEXPs.\n"
"Usage: whereis [-q] [-n] [-t TYPEREGEXP] [NAMEREGEXP]\n"
"Prints the global and static variables.\n"
msgstr ""

#: symtab.c:6722
msgid ""
"All function names or those matching REGEXPs.\n"
"Usage: info functions [-q] [-n] [-t TYPEREGEXP] [NAMEREGEXP]\n"
"Prints the functions.\n"
msgstr ""

#: symtab.c:6726
msgid "functions"
msgstr ""

#: symtab.c:6730
msgid ""
"All type names, or those matching REGEXP.\n"
"Usage: info types [-q] [REGEXP]\n"
"Print information about all types matching REGEXP, or all types if no\n"
"REGEXP is given.  The optional flag -q disables printing of headers."
msgstr ""

#: symtab.c:6740
msgid ""
"All source files in the program or those matching REGEXP.\n"
"Usage: info sources [OPTION]... [REGEXP]\n"
"By default, REGEXP is used to match anywhere in the filename.\n"
"\n"
"Options:\n"
"%OPTIONS%"
msgstr ""

#: symtab.c:6753
msgid "All module names, or those matching REGEXP."
msgstr ""

#: symtab.c:6756
msgid "Print information about modules."
msgstr ""

#: symtab.c:6761
msgid ""
"Display functions arranged by modules.\n"
"Usage: info module functions [-q] [-m MODREGEXP] [-t TYPEREGEXP] [REGEXP]\n"
"Print a summary of all functions within each Fortran module, grouped by\n"
"module and file.  For each function the line on which the function is\n"
"defined is given along with the type signature and name of the function.\n"
"\n"
"If REGEXP is provided then only functions whose name matches REGEXP are\n"
"listed.  If MODREGEXP is provided then only functions in modules matching\n"
"MODREGEXP are listed.  If TYPEREGEXP is given then only functions whose\n"
"type signature matches TYPEREGEXP are listed.\n"
"\n"
"The -q flag suppresses printing some header information."
msgstr ""

#: symtab.c:6778
msgid ""
"Display variables arranged by modules.\n"
"Usage: info module variables [-q] [-m MODREGEXP] [-t TYPEREGEXP] [REGEXP]\n"
"Print a summary of all variables within each Fortran module, grouped by\n"
"module and file.  For each variable the line on which the variable is\n"
"defined is given along with the type and name of the variable.\n"
"\n"
"If REGEXP is provided then only variables whose name matches REGEXP are\n"
"listed.  If MODREGEXP is provided then only variables in modules matching\n"
"MODREGEXP are listed.  If TYPEREGEXP is given then only variables whose\n"
"type matches TYPEREGEXP are listed.\n"
"\n"
"The -q flag suppresses printing some header information."
msgstr ""

#: symtab.c:6796
msgid "Set a breakpoint for all functions matching REGEXP."
msgstr ""

#: symtab.c:6800
msgid "Set how the debugger handles ambiguities in expressions."
msgstr ""

#: symtab.c:6801
msgid "Show how the debugger handles ambiguities in expressions."
msgstr ""

#: symtab.c:6802
msgid ""
"Valid values are \"ask\", \"all\", \"cancel\", and the default is \"all\"."
msgstr ""

#: symtab.c:6807
msgid "Set whether a source file may have multiple base names."
msgstr ""

#: symtab.c:6808
msgid "Show whether a source file may have multiple base names."
msgstr ""

#: symtab.c:6809
msgid ""
"(A \"base name\" is the name of a file with the directory part removed.\n"
"Example: The base name of \"/home/user/hello.c\" is \"hello.c\".)\n"
"If set, GDB will canonicalize file names (e.g., expand symlinks)\n"
"before comparing them.  Canonicalization is an expensive operation,\n"
"but it allows the same file be known by more than one base name.\n"
"If not set (the default), all source files are assumed to have just\n"
"one base name, and gdb will do file name comparisons more efficiently."
msgstr ""

#: symtab.c:6821
msgid "Set debugging of symbol table creation."
msgstr ""

#: symtab.c:6822
msgid "Show debugging of symbol table creation."
msgstr ""

#: symtab.c:6822
msgid ""
"When enabled (non-zero), debugging messages are printed when building\n"
"symbol tables.  A value of 1 (one) normally provides enough information.\n"
"A value greater than 1 provides more verbose information."
msgstr ""

#: symtab.c:6831
msgid "Set debugging of symbol lookup."
msgstr ""

#: symtab.c:6832
msgid "Show debugging of symbol lookup."
msgstr ""

#: symtab.c:6833
msgid "When enabled (non-zero), symbol lookups are logged."
msgstr ""

#: symtab.c:6840
msgid "Set the size of the symbol cache."
msgstr ""

#: symtab.c:6841
msgid "Show the size of the symbol cache."
msgstr ""

#: symtab.c:6841
msgid ""
"The size of the symbol cache.\n"
"If zero then the symbol cache is disabled."
msgstr ""

#: symtab.c:6849
msgid "Dump the symbol cache for each program space."
msgstr ""

#: symtab.c:6854
msgid "Print symbol cache statistics for each program space."
msgstr ""

#: symtab.c:6859
msgid "Flush the symbol cache for each program space."
msgstr ""

#: symtab.h:1336
msgid "Section index is uninitialized"
msgstr ""

#: target-dcache.c:104
#, possible-c-format
msgid "Cache use for stack accesses is %s.\n"
msgstr ""

#: target-dcache.c:144
#, possible-c-format
msgid "Cache use for code accesses is %s.\n"
msgstr ""

#: target-dcache.c:159
msgid "Set cache use for stack access."
msgstr ""

#: target-dcache.c:160
msgid "Show cache use for stack access."
msgstr ""

#: target-dcache.c:161
msgid ""
"When on, use the target memory cache for all stack access, regardless of "
"any\n"
"configured memory regions.  This improves remote performance significantly.\n"
"By default, caching for stack access is on."
msgstr ""

#: target-dcache.c:170
msgid "Set cache use for code segment access."
msgstr ""

#: target-dcache.c:171
msgid "Show cache use for code segment access."
msgstr ""

#: target-dcache.c:172
msgid ""
"When on, use the target memory cache for all code segment accesses,\n"
"regardless of any configured memory regions.  This improves remote\n"
"performance significantly.  By default, caching for code segment\n"
"access is on."
msgstr ""

#: target-descriptions.c:542
msgid "Architecture rejected target-supplied description"
msgstr ""

#: target-descriptions.c:551
msgid "Target-supplied registers are not supported by the current architecture"
msgstr ""

#: target-descriptions.c:578
msgid "Could not remove target-supplied description"
msgstr ""

#: target-descriptions.c:915 target-descriptions.c:937
#, possible-c-format
msgid "Register \"%s\" has an unsupported size (%d bits)"
msgstr ""

#: target-descriptions.c:1164
#, possible-c-format
msgid "Attempted to add duplicate compatible architecture \"%s\""
msgstr ""

#: target-descriptions.c:1179
#, possible-c-format
msgid "Attempted to add duplicate property \"%s\""
msgstr ""

#: target-descriptions.c:1257
#, possible-c-format
msgid "The target description will be read from \"%s\".\n"
msgstr ""

#: target-descriptions.c:1260
msgid "The target description will be read from the target.\n"
msgstr ""

#: target-descriptions.c:1371 target-descriptions.c:1492
#, possible-c-format
msgid "C output is not supported type \"%s\"."
msgstr ""

#: target-descriptions.c:1634
#, possible-c-format
msgid "\"regnum\" attribute %ld is not the largest number (%d)."
msgstr ""

#: target-descriptions.c:1698
msgid "There is no target description to print."
msgstr ""

#: target-descriptions.c:1701
msgid "The current target description did not come from an XML file."
msgstr ""

#: target-descriptions.c:1771
#, possible-c-format
msgid "Could not convert description for %s to xml.\n"
msgstr ""

#: target-descriptions.c:1780
#, possible-c-format
msgid "Could not convert description for %s from xml.\n"
msgstr ""

#: target-descriptions.c:1786
#, possible-c-format
msgid "Converted description for %s does not match.\n"
msgstr ""

#: target-descriptions.c:1802
msgid "Missing dir name"
msgstr ""

#: target-descriptions.c:1816
#, possible-c-format
msgid "Descriptions for %s do not match.\n"
msgstr ""

#: target-descriptions.c:1823
#, possible-c-format
msgid "Tested %lu XML files, %d failed\n"
msgstr ""

#: target-descriptions.c:1832
msgid "Set target description specific variables."
msgstr ""

#. allow-unknown
#: target-descriptions.c:1836
msgid "Show target description specific variables."
msgstr ""

#. allow-unknown
#: target-descriptions.c:1840
msgid "Unset target description specific variables."
msgstr ""

#: target-descriptions.c:1847
msgid "Set the file to read for an XML target description."
msgstr ""

#: target-descriptions.c:1848
msgid "Show the file to read for an XML target description."
msgstr ""

#: target-descriptions.c:1849
msgid ""
"When set, GDB will read the target description from a local\n"
"file instead of querying the remote target."
msgstr ""

#: target-descriptions.c:1856
msgid ""
"Unset the file to read for an XML target description.\n"
"When unset, GDB will read the description from the target."
msgstr ""

#: target-descriptions.c:1861
msgid "Print the current target description as a C source file."
msgstr ""

#: target-descriptions.c:1868
msgid ""
"Check equality of GDB target descriptions and XML created descriptions.\n"
"Check the target descriptions created in GDB equal the descriptions\n"
"created from XML files in the directory.\n"
"The parameter is the directory name."
msgstr ""

#: target-float.c:1116
#, possible-c-format
msgid "Cannot perform exponentiation: %s"
msgstr ""

#: target-float.c:1129 target-float.c:1691
msgid "Integer-only operation on floating point number."
msgstr ""

#: target-float.c:1802
#, possible-c-format
msgid "Cannot perform operation: %s"
msgstr ""

#: target-float.c:1831 target-float.c:1859 target-float.c:1955
#: target-float.c:1986
msgid "Unknown decimal floating point type."
msgstr ""

#. libdecnumber can convert only 32-bit integers.
#: target-float.c:2007 target-float.c:2024
msgid ""
"Conversion of large integer to a decimal floating type is not supported."
msgstr ""

#: target-float.c:2078
msgid "Operation not valid for decimal floating point number."
msgstr ""

#: target-float.c:2112
msgid "Comparison with an invalid number (NaN)."
msgstr ""

#: target-memory.c:367
msgid "Error writing data to flash"
msgstr ""

#: target.c:174
#, possible-c-format
msgid "Target debugging is %s.\n"
msgstr ""

#: target.c:272
#, possible-c-format
msgid "target already added (\"%s\")."
msgstr ""

#: target.c:276
msgid ""
"Connect to a target machine or process.\n"
"The first argument is the type or protocol of the target machine.\n"
"Remaining arguments are interpreted by the target protocol.  For more\n"
"information on the arguments for a particular protocol, type\n"
"`help target ' followed by the protocol name."
msgstr ""

#: target.c:516
#, possible-c-format
msgid "You can't do that when your target is `%s'"
msgstr ""

#: target.c:529
msgid "No saved terminal information.\n"
msgstr ""

#: target.c:610
msgid "Attempt to unpush the dummy target"
msgstr ""

#: target.c:726
msgid "Cannot find thread-local variables in this thread library."
msgstr ""

#: target.c:731
#, possible-c-format
msgid "Cannot find shared library `%s' in dynamic linker's load module list"
msgstr ""

#: target.c:734
#, possible-c-format
msgid "Cannot find executable file `%s' in dynamic linker's load module list"
msgstr ""

#: target.c:739
#, possible-c-format
msgid ""
"The inferior has not yet allocated storage for thread-local variables in\n"
"the shared library `%s'\n"
"for %s"
msgstr ""

#: target.c:746
#, possible-c-format
msgid ""
"The inferior has not yet allocated storage for thread-local variables in\n"
"the executable `%s'\n"
"for %s"
msgstr ""

#: target.c:755
#, possible-c-format
msgid ""
"Cannot find thread-local storage for %s, shared library %s:\n"
"%s"
msgstr ""

#: target.c:760
#, possible-c-format
msgid ""
"Cannot find thread-local storage for %s, executable file %s:\n"
"%s"
msgstr ""

#: target.c:931
msgid "Writing to flash memory forbidden in this context"
msgstr ""

#: target.c:1165
#, possible-c-format
msgid "Writing to memory is not allowed (addr %s, len %s)"
msgstr ""

#: target.c:1381
msgid "Overlapping regions in memory map: ignoring"
msgstr ""

#: target.c:1408
#, possible-c-format
msgid "Mode for reading from readonly sections is %s.\n"
msgstr ""

#: target.c:1808
#, possible-c-format
msgid "target object %d, annex %s, contained unexpected null characters"
msgstr ""

#: target.c:1851
msgid "May not insert breakpoints"
msgstr ""

#: target.c:1871
msgid "May not remove breakpoints"
msgstr ""

#: target.c:1884
#, possible-c-format
msgid "Symbols from \"%s\".\n"
msgstr ""

#: target.c:1895
msgid "\tWhile running this, GDB does not access memory from...\n"
msgstr ""

#: target.c:1992
msgid "Program not killed."
msgstr ""

#: target.c:2157
msgid "could not find a target to follow fork"
msgstr ""

#: target.c:2181
msgid "could not find a target to follow mourn inferior"
msgstr ""

#: target.c:2235 target.c:2290
#, possible-c-format
msgid "Unable to access %s bytes of target memory at %s, halting search."
msgstr ""

#: target.c:2358
#, possible-c-format
msgid ""
"The \"%s\" target does not support \"run\".  Try \"help target\" or "
"\"continue\"."
msgstr ""

#. This function is only called if the target is running.  In that
#. case there should have been a process_stratum target and it
#. should either know how to create inferiors, or not...
#: target.c:2366
msgid "No targets found"
msgstr ""

#: target.c:2378
#, possible-c-format
msgid "Whether GDB may automatically connect to the native target is %s.\n"
msgstr ""

#: target.c:2395
#, possible-c-format
msgid "native target already set (\"%s\")."
msgstr ""

#: target.c:2423
#, possible-c-format
msgid "Don't know how to %s.  Try \"help target\"."
msgstr ""

#: target.c:3111
#, possible-c-format
msgid "target file %s contained unexpected null characters"
msgstr ""

#: target.c:3230 target.c:3239
msgid "Command not implemented for this target."
msgstr ""

#: target.c:3252
msgid "None"
msgstr ""

#: target.c:3312 target.c:3324
msgid "May not interrupt or stop the target, ignoring attempt"
msgstr ""

#: target.c:3436
#, possible-c-format
msgid "Writing to registers is not allowed (regno %d)"
msgstr ""

#: target.c:3757
msgid "\"monitor\" command not supported by this target."
msgstr ""

#: target.c:3789
msgid "Erasing flash memory region at address "
msgstr ""

#: target.c:3801
msgid "No flash memory regions found.\n"
msgstr ""

#: target.c:3809
msgid "The current target stack is:\n"
msgstr ""

#: target.c:3863
#, possible-c-format
msgid "Controlling the inferior in asynchronous mode is %s.\n"
msgstr ""

#: target.c:3919
#, possible-c-format
msgid "Whether the target is always in non-stop mode is %s (currently %s).\n"
msgstr ""

#: target.c:3924
#, possible-c-format
msgid "Whether the target is always in non-stop mode is %s.\n"
msgstr ""

#: target.c:3993
msgid "Set target debugging."
msgstr ""

#: target.c:3994
msgid "Show target debugging."
msgstr ""

#: target.c:3995
msgid ""
"When non-zero, target debugging is enabled.  Higher numbers are more\n"
"verbose."
msgstr ""

#: target.c:4003
msgid "Set mode for reading from readonly sections."
msgstr ""

#: target.c:4004
msgid "Show mode for reading from readonly sections."
msgstr ""

#: target.c:4005
msgid ""
"When this mode is on, memory reads from readonly sections (such as .text)\n"
"will be read from the object file instead of from the target.  This will\n"
"result in significant performance improvement for remote targets."
msgstr ""

#: target.c:4014
msgid "Send a command to the remote monitor (remote targets only)."
msgstr ""

#: target.c:4017
msgid "Print the name of each layer of the internal target stack."
msgstr ""

#: target.c:4021
msgid "Set whether gdb controls the inferior in asynchronous mode."
msgstr ""

#: target.c:4022
msgid "Show whether gdb controls the inferior in asynchronous mode."
msgstr ""

#: target.c:4023
msgid "Tells gdb whether to control the inferior in asynchronous mode."
msgstr ""

#: target.c:4031
msgid "Set whether gdb always controls the inferior in non-stop mode."
msgstr ""

#: target.c:4032
msgid "Show whether gdb always controls the inferior in non-stop mode."
msgstr ""

#: target.c:4033
msgid "Tells gdb whether to control the inferior in non-stop mode."
msgstr ""

#: target.c:4041
msgid "Set permission to write into registers."
msgstr ""

#: target.c:4042
msgid "Show permission to write into registers."
msgstr ""

#: target.c:4043
msgid ""
"When this permission is on, GDB may write into the target's registers.\n"
"Otherwise, any sort of write attempt will result in an error."
msgstr ""

#: target.c:4050
msgid "Set permission to write into target memory."
msgstr ""

#: target.c:4051
msgid "Show permission to write into target memory."
msgstr ""

#: target.c:4052
msgid ""
"When this permission is on, GDB may write into the target's memory.\n"
"Otherwise, any sort of write attempt will result in an error."
msgstr ""

#: target.c:4059
msgid "Set permission to insert breakpoints in the target."
msgstr ""

#: target.c:4060
msgid "Show permission to insert breakpoints in the target."
msgstr ""

#: target.c:4061
msgid ""
"When this permission is on, GDB may insert breakpoints in the program.\n"
"Otherwise, any sort of insertion attempt will result in an error."
msgstr ""

#: target.c:4068
msgid "Set permission to insert tracepoints in the target."
msgstr ""

#: target.c:4069
msgid "Show permission to insert tracepoints in the target."
msgstr ""

#: target.c:4070
msgid ""
"When this permission is on, GDB may insert tracepoints in the program.\n"
"Otherwise, any sort of insertion attempt will result in an error."
msgstr ""

#: target.c:4077
msgid "Set permission to insert fast tracepoints in the target."
msgstr ""

#: target.c:4078
msgid "Show permission to insert fast tracepoints in the target."
msgstr ""

#: target.c:4079
msgid ""
"When this permission is on, GDB may insert fast tracepoints.\n"
"Otherwise, any sort of insertion attempt will result in an error."
msgstr ""

#: target.c:4086
msgid "Set permission to interrupt or signal the target."
msgstr ""

#: target.c:4087
msgid "Show permission to interrupt or signal the target."
msgstr ""

#: target.c:4088
msgid ""
"When this permission is on, GDB may interrupt/stop the target's execution.\n"
"Otherwise, any attempt to interrupt or stop will be ignored."
msgstr ""

#: target.c:4095
msgid "Erase all flash memory regions."
msgstr ""

#: target.c:4098
msgid "Set whether GDB may automatically connect to the native target."
msgstr ""

#: target.c:4099
msgid "Show whether GDB may automatically connect to the native target."
msgstr ""

#: target.c:4100
msgid ""
"When on, and GDB is not connected to a target yet, GDB\n"
"attempts \"run\" and other commands with the native target."
msgstr ""

#: test-target.c:28
msgid "unit tests target"
msgstr ""

#: thread-fsm.h:109
msgid "should not call async_reply_reason here"
msgstr ""

#: thread.c:324
#, possible-c-format
msgid "[New %s]\n"
msgstr ""

#: thread.c:907
msgid "No thread selected."
msgstr ""

#: thread.c:913
msgid "The current thread has terminated"
msgstr ""

#: thread.c:981
msgid "Requested thread not found in requested process"
msgstr ""

#: thread.c:1068
msgid "No threads.\n"
msgstr ""

#: thread.c:1070
#, possible-c-format
msgid "No threads match '%s'.\n"
msgstr ""

#: thread.c:1215
msgid "Show global thread IDs."
msgstr ""

#: thread.c:1368
#, possible-c-format
msgid ""
"Couldn't restore frame #%d in current thread.  Bottom (innermost) frame "
"selected:"
msgstr ""

#: thread.c:1519 thread.c:1530
#, possible-c-format
msgid ""
"\n"
"Thread %s (%s):\n"
msgstr ""

#: thread.c:1545
msgid ""
"Call COMMAND for all threads in ascending order.\n"
"The default is descending order."
msgstr ""

#: thread.c:1559
msgid "Disables printing the thread information."
msgstr ""

#: thread.c:1617
msgid "Please specify a command at the end of 'thread apply all'"
msgstr ""

#: thread.c:1738
msgid "Please specify a thread ID list"
msgstr ""

#: thread.c:1758
msgid "Please specify a command following the thread ID list"
msgstr ""

#: thread.c:1781
#, possible-c-format
msgid "Unknown inferior %d"
msgstr ""

#: thread.c:1799
#, possible-c-format
msgid "Unknown thread %d.%d"
msgstr ""

#: thread.c:1801
#, possible-c-format
msgid "Unknown thread %d"
msgstr ""

#: thread.c:1807
#, possible-c-format
msgid "Thread %s has terminated."
msgstr ""

#: thread.c:1822
msgid "Please specify a command to apply on all threads"
msgstr ""

#: thread.c:1833
msgid "Please specify a command to apply on all frames of all threads"
msgstr ""

#: thread.c:1847 thread.c:1895
msgid "No thread selected"
msgstr ""

#: thread.c:1854
#, possible-c-format
msgid "[Current thread is %s (%s) (exited)]\n"
msgstr ""

#: thread.c:1858
#, possible-c-format
msgid "[Current thread is %s (%s)]\n"
msgstr ""

#: thread.c:1924
#, possible-c-format
msgid "Thread %s has name '%s'\n"
msgstr ""

#: thread.c:1932
#, possible-c-format
msgid "Thread %s has target name '%s'\n"
msgstr ""

#: thread.c:1940
#, possible-c-format
msgid "Thread %s has target id '%s'\n"
msgstr ""

#: thread.c:1948
#, possible-c-format
msgid "Thread %s has extra info '%s'\n"
msgstr ""

#: thread.c:1954
#, possible-c-format
msgid "No threads match '%s'\n"
msgstr ""

#: thread.c:1964
#, possible-c-format
msgid "Printing of thread events is %s.\n"
msgstr ""

#: thread.c:1974
#, possible-c-format
msgid "Thread ID %s has terminated."
msgstr ""

#: thread.c:2127
msgid ""
"Display currently known threads.\n"
"Usage: info threads [OPTION]... [ID]...\n"
"\n"
"Options:\n"
"%OPTIONS%If ID is given, it is a space-separated list of IDs of threads to "
"display.\n"
"Otherwise, all threads are displayed."
msgstr ""

#: thread.c:2140
msgid ""
"Use this command to switch between threads.\n"
"The new thread ID must be currently known."
msgstr ""

#: thread.c:2157
msgid ""
"Apply a command to a list of threads.\n"
"Usage: thread apply ID... [OPTION]... COMMAND\n"
"ID is a space-separated list of IDs of threads to apply COMMAND on.\n"
msgstr ""

#: thread.c:2173
msgid ""
"Apply a command to all threads.\n"
"\n"
"Usage: thread apply all [OPTION]... COMMAND\n"
msgstr ""

#: thread.c:2185
msgid ""
"Apply a command to all threads (ignoring errors and empty output).\n"
"Usage: taas [OPTION]... COMMAND\n"
"shortcut for 'thread apply all -s [OPTION]... COMMAND'\n"
"See \"help thread apply all\" for available options."
msgstr ""

#: thread.c:2192
msgid ""
"Apply a command to all frames of all threads (ignoring errors and empty "
"output).\n"
"Usage: tfaas [OPTION]... COMMAND\n"
"shortcut for 'thread apply all -s -- frame apply all -s [OPTION]... "
"COMMAND'\n"
"See \"help frame apply all\" for available options."
msgstr ""

#: thread.c:2200
msgid ""
"Set the current thread's name.\n"
"Usage: thread name [NAME]\n"
"If NAME is not given, then any existing name is removed."
msgstr ""

#: thread.c:2204
msgid ""
"Find threads that match a regular expression.\n"
"Usage: thread find REGEXP\n"
"Will display thread ids whose name, target ID, or extra info matches REGEXP."
msgstr ""

#: thread.c:2213
msgid "Set printing of thread events (such as thread start and exit)."
msgstr ""

#: thread.c:2214
msgid "Show printing of thread events (such as thread start and exit)."
msgstr ""

#: tic6x-tdep.c:848
#, possible-c-format
msgid "unexpected length %d of type"
msgstr ""

#: tic6x-tdep.c:1067
#, possible-c-format
msgid "unexpected type %d of arg %d"
msgstr ""

#: tic6x-tdep.c:1072
#, possible-c-format
msgid "unexpected length %d of arg %d"
msgstr ""

#: tid-parse.c:31
#, possible-c-format
msgid "Invalid thread ID: %s"
msgstr ""

#: tid-parse.c:47 tid-parse.c:248
#, possible-c-format
msgid "negative value: %s"
msgstr ""

#: tid-parse.c:76
#, possible-c-format
msgid "No inferior number '%d'"
msgstr ""

#: tid-parse.c:103
#, possible-c-format
msgid "Unknown thread %d.%d."
msgstr ""

#: tid-parse.c:105
#, possible-c-format
msgid "Unknown thread %d."
msgstr ""

#: tid-parse.c:154 tid-parse.c:171
msgid "unhandled state"
msgstr ""

#: top.c:136
#, possible-c-format
msgid "Whether to confirm potentially dangerous operations is %s.\n"
msgstr ""

#: top.c:342
msgid "opening terminal failed"
msgstr ""

#: top.c:362
msgid "Usage: new-ui INTERPRETER TTY"
msgstr ""

#: top.c:647
msgid "That is not a command, just a help topic."
msgstr ""

#: top.c:763
msgid "No previous command to relaunch"
msgstr ""

#: top.c:890
#, possible-c-format
msgid "Saving of the history record on exit is %s.\n"
msgstr ""

#: top.c:902
#, possible-c-format
msgid "The size of the command history is %s.\n"
msgstr ""

#: top.c:915
#, possible-c-format
msgid "The number of history entries to look back at for duplicates is %s.\n"
msgstr ""

#: top.c:925
#, possible-c-format
msgid "The filename in which to record the command history is \"%s\".\n"
msgstr ""

#: top.c:1194 top.c:1224
#, possible-c-format
msgid "Could not rename %s to %s: %s"
msgstr ""

#: top.c:1400
msgid "Type \"show configuration\" for configuration details.\n"
msgstr ""

#: top.c:1406
msgid "For bug reporting instructions, please see:\n"
msgstr ""

#: top.c:1410
msgid ""
"Find the GDB manual and other documentation resources online at:\n"
"    <http://www.gnu.org/software/gdb/documentation/>."
msgstr ""

#: top.c:1413
msgid "For help, type \"help\".\n"
msgstr ""

#: top.c:1415
msgid "Type \"apropos word\" to search for commands related to \"word\"."
msgstr ""

#: top.c:1423
#, possible-c-format
msgid ""
"This GDB was configured as follows:\n"
"   configure --host=%s --target=%s\n"
msgstr ""

#: top.c:1427
#, possible-c-format
msgid ""
"             --with-auto-load-dir=%s\n"
"             --with-auto-load-safe-path=%s\n"
msgstr ""

#: top.c:1432
msgid "             --with-expat\n"
msgstr ""

#: top.c:1436
msgid "             --without-expat\n"
msgstr ""

#: top.c:1441
#, possible-c-format
msgid "             --with-gdb-datadir=%s%s\n"
msgstr ""

#: top.c:1445
#, possible-c-format
msgid "             --with-iconv-bin=%s%s\n"
msgstr ""

#: top.c:1450
#, possible-c-format
msgid "             --with-jit-reader-dir=%s%s\n"
msgstr ""

#: top.c:1454
msgid "             --with-libunwind-ia64\n"
msgstr ""

#: top.c:1458
msgid "             --without-libunwind-ia64\n"
msgstr ""

#: top.c:1463
msgid "             --with-lzma\n"
msgstr ""

#: top.c:1467
msgid "             --without-lzma\n"
msgstr ""

#: top.c:1472
msgid "             --with-babeltrace\n"
msgstr ""

#: top.c:1476
msgid ""
"             --without-babeltrace\n"
"\t\t"
msgstr ""

#: top.c:1481
msgid "             --with-intel-pt\n"
msgstr ""

#: top.c:1485
msgid "             --without-intel-pt\n"
msgstr ""

#: top.c:1490
msgid "             --with-mpfr\n"
msgstr ""

#: top.c:1494
msgid "             --without-mpfr\n"
msgstr ""

#: top.c:1499
msgid "             --with-xxhash\n"
msgstr ""

#: top.c:1503
msgid "             --without-xxhash\n"
msgstr ""

#: top.c:1508
#, possible-c-format
msgid "             --with-python=%s%s\n"
msgstr ""

#: top.c:1512
msgid "             --without-python\n"
msgstr ""

#: top.c:1517
msgid "             --with-guile\n"
msgstr ""

#: top.c:1521
msgid "             --without-guile\n"
msgstr ""

#: top.c:1526
msgid "             --enable-source-highlight\n"
msgstr ""

#: top.c:1530
msgid "             --disable-source-highlight\n"
msgstr ""

#: top.c:1535
#, possible-c-format
msgid "             --with-relocated-sources=%s\n"
msgstr ""

#: top.c:1540
#, possible-c-format
msgid "             --with-separate-debug-dir=%s%s\n"
msgstr ""

#: top.c:1544
#, possible-c-format
msgid "             --with-sysroot=%s%s\n"
msgstr ""

#: top.c:1548
#, possible-c-format
msgid "             --with-system-gdbinit=%s%s\n"
msgstr ""

#: top.c:1552
#, possible-c-format
msgid "             --with-system-gdbinit-dir=%s%s\n"
msgstr ""

#. We assume "relocatable" will be printed at least once, thus we always
#. print this text.  It's a reasonably safe assumption for now.
#: top.c:1557
msgid ""
"\n"
"(\"Relocatable\" means the directory can be moved with the GDB installation\n"
"tree, and GDB will still find it.)\n"
msgstr ""

#: top.c:1636
#, possible-c-format
msgid "\tInferior %d [%s] will be detached.\n"
msgstr ""

#: top.c:1640
#, possible-c-format
msgid "\tInferior %d [%s] will be killed.\n"
msgstr ""

#: top.c:1659
msgid ""
"A debugging session is active.\n"
"\n"
msgstr ""

#: top.c:1661
msgid ""
"\n"
"Quit anyway? "
msgstr ""

#: top.c:1905
msgid "\"set history\" must be followed by the name of a history subcommand.\n"
msgstr ""

#: top.c:1934
msgid "Set verbose printing of informational messages."
msgstr ""

#: top.c:1935
msgid "Show verbose printing of informational messages."
msgstr ""

#: top.c:2020
#, possible-c-format
msgid "Gdb's prompt is \"%s\".\n"
msgstr ""

#: top.c:2038
#, possible-c-format
msgid "Editing of command lines as they are typed is %s.\n"
msgstr ""

#: top.c:2040
msgid "on"
msgstr ""

#: top.c:2040
msgid "off"
msgstr ""

#: top.c:2047
#, possible-c-format
msgid "Annotation_level is %s.\n"
msgstr ""

#: top.c:2054
#, possible-c-format
msgid "Notification of completion for asynchronous execution commands is %s.\n"
msgstr ""

#: top.c:2077
#, possible-c-format
msgid "GDB's data directory is \"%s\".\n"
msgstr ""

#: top.c:2133
msgid "Set gdb's prompt."
msgstr ""

#: top.c:2134
msgid "Show gdb's prompt."
msgstr ""

#: top.c:2139
msgid ""
"Don't repeat this command.\n"
"Primarily used inside of user-defined commands that should not be repeated "
"when\n"
"hitting return."
msgstr ""

#: top.c:2145
msgid "Set editing of command lines as they are typed."
msgstr ""

#: top.c:2146
msgid "Show editing of command lines as they are typed."
msgstr ""

#: top.c:2147
msgid ""
"Use \"on\" to enable the editing, and \"off\" to disable it.\n"
"Without an argument, command line editing is enabled.  To edit, use\n"
"EMACS-like or VI-like commands like control-P or ESC."
msgstr ""

#: top.c:2155
msgid "Set saving of the history record on exit."
msgstr ""

#: top.c:2156
msgid "Show saving of the history record on exit."
msgstr ""

#: top.c:2157
msgid ""
"Use \"on\" to enable the saving, and \"off\" to disable it.\n"
"Without an argument, saving is enabled."
msgstr ""

#: top.c:2165
msgid "Set the size of the command history."
msgstr ""

#: top.c:2166
msgid "Show the size of the command history."
msgstr ""

#: top.c:2167
msgid ""
"This is the number of previous commands to keep a record of.\n"
"If set to \"unlimited\", the number of commands kept in the history\n"
"list is unlimited.  This defaults to the value of the environment\n"
"variable \"GDBHISTSIZE\", or to 256 if this variable is not set."
msgstr ""

#: top.c:2177
msgid "Set how far back in history to look for and remove duplicate entries."
msgstr ""

#: top.c:2178
msgid "Show how far back in history to look for and remove duplicate entries."
msgstr ""

#: top.c:2179
msgid ""
"If set to a nonzero value N, GDB will look back at the last N history "
"entries\n"
"and remove the first history entry that is a duplicate of the most recent\n"
"entry, each time a new history entry is added.\n"
"If set to \"unlimited\", this lookbehind is unbounded.\n"
"Only history entries added during this session are considered for removal.\n"
"If set to 0, removal of duplicate history entries is disabled.\n"
"By default this option is set to 0."
msgstr ""

#: top.c:2191
msgid "Set the filename in which to record the command history."
msgstr ""

#: top.c:2192
msgid "Show the filename in which to record the command history."
msgstr ""

#: top.c:2193
msgid "(the list of previous commands of which a record is kept)."
msgstr ""

#: top.c:2199
msgid "Set whether to confirm potentially dangerous operations."
msgstr ""

#: top.c:2200
msgid "Show whether to confirm potentially dangerous operations."
msgstr ""

#: top.c:2206
msgid "Set annotation_level."
msgstr ""

#: top.c:2207
msgid "Show annotation_level."
msgstr ""

#: top.c:2208
msgid ""
"0 == normal;     1 == fullname (for use when running under emacs)\n"
"2 == output annotated suitably for use by programs that control GDB."
msgstr ""

#: top.c:2216
msgid "Set notification of completion for asynchronous execution commands."
msgstr ""

#: top.c:2217
msgid "Show notification of completion for asynchronous execution commands."
msgstr ""

#: top.c:2218
msgid "Use \"on\" to enable the notification, and \"off\" to disable it."
msgstr ""

#: top.c:2225
msgid "Set GDB's data directory."
msgstr ""

#: top.c:2226
msgid "Show GDB's data directory."
msgstr ""

#: top.c:2227
msgid "When set, GDB uses the specified path to search for data files."
msgstr ""

#: top.c:2234
msgid "Set whether GDB's standard input is a terminal."
msgstr ""

#: top.c:2235
msgid "Show whether GDB's standard input is a terminal."
msgstr ""

#: top.c:2236
msgid ""
"If on, GDB assumes that standard input is a terminal.  In practice, it\n"
"means that GDB should wait for the user to answer queries associated to\n"
"commands entered at the command prompt.  If off, GDB assumes that standard\n"
"input is not a terminal, and uses the default answer to all queries.\n"
"If auto (the default), determine which mode to use based on the standard\n"
"input settings."
msgstr ""

#: top.c:2247
msgid ""
"Create a new UI.\n"
"Usage: new-ui INTERPRETER TTY\n"
"The first argument is the name of the interpreter to run.\n"
"The second argument is the terminal the UI runs on."
msgstr ""

#: tracectf.c:41
msgid "CTF file"
msgstr ""

#: tracectf.c:42
msgid ""
"(Use a CTF directory as a target.\n"
"Specify the filename of the CTF directory."
msgstr ""

#: tracectf.c:147
#, possible-c-format
msgid "Unable to write metadata file (%s)"
msgstr ""

#: tracectf.c:160
#, possible-c-format
msgid "Unable to write file for saving trace data (%s)"
msgstr ""

#: tracectf.c:192
#, possible-c-format
msgid "Unable to seek file for saving trace data (%s)"
msgstr ""

#: tracectf.c:352
#, possible-c-format
msgid "Unable to open directory '%s' for saving trace data (%s)"
msgstr ""

#: tracectf.c:362 tracectf.c:371 tracefile-tfile.c:127
#, possible-c-format
msgid "Unable to open file '%s' for saving trace data (%s)"
msgstr ""

#: tracectf.c:897
msgid "Unable to create bt_context"
msgstr ""

#: tracectf.c:902
#, possible-c-format
msgid "Unable to use libbabeltrace on directory \"%s\""
msgstr ""

#: tracectf.c:911
msgid "Unable to create bt_iterator"
msgstr ""

#: tracectf.c:1125
msgid "No CTF directory specified."
msgstr ""

#: tracectf.c:1137
msgid "Wrong event id of the first event"
msgstr ""

#: tracectf.c:1144
msgid "Wrong event id of the second event"
msgstr ""

#: tracectf.c:1161
msgid "Wrong event id of the first event of the second packet"
msgstr ""

#: tracectf.c:1306
msgid "ctf_xfer_partial: trace file is read-only"
msgstr ""

#: tracectf.c:1624 tracefile-tfile.c:755
msgid "unknown tfind type"
msgstr ""

#: tracectf.c:1704
#, possible-c-format
msgid "Unhandled trace block type (%s) while building trace frame info."
msgstr ""

#: tracefile-tfile.c:45
msgid "Local trace dump file"
msgstr ""

#: tracefile-tfile.c:46
msgid ""
"Use a trace file as a target.\n"
"Specify the filename of the trace file."
msgstr ""

#: tracefile-tfile.c:449
msgid "Premature end of file while reading trace file"
msgstr ""

#: tracefile-tfile.c:469
msgid "No trace file specified."
msgstr ""

#: tracefile-tfile.c:499
msgid "File is not a valid trace file."
msgstr ""

#: tracefile-tfile.c:537
msgid "Excessively long lines in trace file"
msgstr ""

#: tracefile-tfile.c:549
msgid "No register block size recorded in trace file"
msgstr ""

#: tracefile-tfile.c:563
msgid "No traceframes present in this file."
msgstr ""

#: tracefile-tfile.c:611
#, possible-c-format
msgid "Ignoring trace file definition \"%s\""
msgstr ""

#: tracefile-tfile.c:846 tracefile.c:299
#, possible-c-format
msgid "Unknown block type '%c' (0x%x) in trace frame"
msgstr ""

#: tracefile-tfile.c:923
msgid "tfile_xfer_partial: tdesc is read-only"
msgstr ""

#: tracefile-tfile.c:954
msgid "tfile_xfer_partial: trace file is read-only"
msgstr ""

#: tracefile-tfile.c:1106
#, possible-c-format
msgid "Unhandled trace block type (%d) '%c ' while building trace frame info."
msgstr ""

#: tracefile.c:80
#, possible-c-format
msgid "Target failed to save trace data to '%s'."
msgstr ""

#: tracefile.c:152 tracefile.c:200 tracefile.c:214 tracefile.c:230
#: tracefile.c:263 tracefile.c:285
msgid "Failure to get requested trace buffer data"
msgstr ""

#: tracefile.c:327 tracefile.c:345
msgid "file in which to save trace data"
msgstr ""

#: tracefile.c:339
#, possible-c-format
msgid "unknown option `%s'"
msgstr ""

#: tracefile.c:353
#, possible-c-format
msgid "Trace data saved to %s '%s'.\n"
msgstr ""

#: tracefile.c:398
#, possible-c-format
msgid "Tracepoint %d has multiple locations, cannot infer $pc"
msgstr ""

#: tracefile.c:406
#, possible-c-format
msgid "Tracepoint %d does while-stepping, cannot infer $pc"
msgstr ""

#: tracefile.c:477
msgid ""
"Save the trace data to a file.\n"
"Use the '-ctf' option to save the data to CTF format.\n"
"Use the '-r' option to direct the target to save directly to the file,\n"
"using its own filesystem."
msgstr ""

#: tracepoint.c:299
#, possible-c-format
msgid "No trace variable named \"$%s\", not deleting"
msgstr ""

#: tracepoint.c:311
msgid "Must supply a non-empty variable name"
msgstr ""

#: tracepoint.c:318 tracepoint.c:323
#, possible-c-format
msgid "$%s is not a valid trace state variable name"
msgstr ""

#: tracepoint.c:337
msgid "Syntax is $NAME [ = EXPR ]"
msgstr ""

#: tracepoint.c:352
msgid "Syntax must be $NAME [ = EXPR ]"
msgstr ""

#: tracepoint.c:368
#, possible-c-format
msgid "Trace state variable $%s now has initial value %s.\n"
msgstr ""

#: tracepoint.c:380
#, possible-c-format
msgid "Trace state variable $%s created, with initial value %s.\n"
msgstr ""

#: tracepoint.c:390
msgid "Delete all trace state variables? "
msgstr ""

#: tracepoint.c:404
#, possible-c-format
msgid "Name \"%s\" not prefixed with '$', ignoring"
msgstr ""

#: tracepoint.c:465
msgid "No trace state variables.\n"
msgstr ""

#: tracepoint.c:504
msgid "This command cannot be used at the top level."
msgstr ""

#: tracepoint.c:510 tracepoint.c:516 tracepoint.c:522
msgid "This command can only be used in a tracepoint actions list."
msgstr ""

#: tracepoint.c:557
msgid "Target does not support \"/s\" option for string tracing."
msgstr ""

#: tracepoint.c:560
#, possible-c-format
msgid "Undefined collection format \"%c\"."
msgstr ""

#: tracepoint.c:600
msgid "expression is malformed"
msgstr ""

#: tracepoint.c:606
msgid "expression has min height < 0"
msgstr ""

#: tracepoint.c:615 tracepoint.c:626
msgid "Expression is too complicated."
msgstr ""

#: tracepoint.c:656
#, possible-c-format
msgid "`%s' is not a tracepoint action, or is ambiguous."
msgstr ""

#: tracepoint.c:694
#, possible-c-format
msgid "constant `%s' (value %s) will not be collected."
msgstr ""

#: tracepoint.c:702
#, possible-c-format
msgid "`%s' is optimized away and cannot be collected."
msgstr ""

#: tracepoint.c:755
#, possible-c-format
msgid "while-stepping step count `%s' is malformed."
msgstr ""

#: tracepoint.c:763
#, possible-c-format
msgid "`%s' is not a supported tracepoint action."
msgstr ""

#: tracepoint.c:868
#, possible-c-format
msgid "Can't collect register %d"
msgstr ""

#: tracepoint.c:1097
msgid "Can't collect locals; no symbol table info available.\n"
msgstr ""

#: tracepoint.c:1104
msgid "No locals found in scope."
msgstr ""

#: tracepoint.c:1112
msgid "Can't collect args; no symbol table info available."
msgstr ""

#: tracepoint.c:1118
msgid "No args found in scope."
msgstr ""

#: tracepoint.c:1308 tracepoint.c:2678
#, possible-c-format
msgid "Bad action list item: %s"
msgstr ""

#: tracepoint.c:1486
#, possible-c-format
msgid "Invalid tracepoint command '%s'"
msgstr ""

#: tracepoint.c:1568
msgid "Pending tracepoints will not be resolved while GDB is disconnected\n"
msgstr ""

#: tracepoint.c:1593
msgid "No tracepoints defined, not starting trace"
msgstr ""

#: tracepoint.c:1605
#, possible-c-format
msgid "May not insert %stracepoints, skipping tracepoint %d"
msgstr ""

#: tracepoint.c:1612
msgid "No tracepoints enabled"
msgstr ""

#. No point in tracing with only disabled tracepoints that
#. cannot be re-enabled.
#: tracepoint.c:1617
msgid "No tracepoints enabled, not starting trace"
msgstr ""

#: tracepoint.c:1622
msgid "No tracepoints that may be downloaded, not starting trace"
msgstr ""

#: tracepoint.c:1682
msgid "Target does not support trace user/notes, info ignored"
msgstr ""

#: tracepoint.c:1706
msgid "A trace is running already.  Start a new run? "
msgstr ""

#: tracepoint.c:1707
msgid "New trace run not started."
msgstr ""

#: tracepoint.c:1722
msgid "Trace is not running."
msgstr ""

#: tracepoint.c:1760 tracepoint.c:2902
msgid "Target does not support trace notes, note ignored"
msgstr ""

#: tracepoint.c:1778
msgid "Using a trace file.\n"
msgstr ""

#: tracepoint.c:1781
msgid "Trace can not be run on this target.\n"
msgstr ""

#: tracepoint.c:1788
msgid "Run/stop status is unknown.\n"
msgstr ""

#: tracepoint.c:1792
msgid "Trace is running on the target.\n"
msgstr ""

#: tracepoint.c:1799
msgid "No trace has been run on the target.\n"
msgstr ""

#: tracepoint.c:1803
#, possible-c-format
msgid "Trace stopped by a tstop command (%s).\n"
msgstr ""

#: tracepoint.c:1806
msgid "Trace stopped by a tstop command.\n"
msgstr ""

#: tracepoint.c:1809
msgid "Trace stopped because the buffer was full.\n"
msgstr ""

#: tracepoint.c:1812
msgid "Trace stopped because of disconnection.\n"
msgstr ""

#: tracepoint.c:1815
#, possible-c-format
msgid "Trace stopped by tracepoint %d.\n"
msgstr ""

#: tracepoint.c:1820
#, possible-c-format
msgid "Trace stopped by an error (%s, tracepoint %d).\n"
msgstr ""

#: tracepoint.c:1824
#, possible-c-format
msgid "Trace stopped by an error (%s).\n"
msgstr ""

#: tracepoint.c:1828
msgid "Trace stopped for an unknown reason.\n"
msgstr ""

#: tracepoint.c:1831
#, possible-c-format
msgid "Trace stopped for some other reason (%d).\n"
msgstr ""

#: tracepoint.c:1840
#, possible-c-format
msgid "Buffer contains %d trace frames (of %d created total).\n"
msgstr ""

#: tracepoint.c:1846
#, possible-c-format
msgid "Collected %d trace frames.\n"
msgstr ""

#: tracepoint.c:1854
#, possible-c-format
msgid "Trace buffer has %d bytes of %d bytes free"
msgstr ""

#: tracepoint.c:1857
#, possible-c-format
msgid " (%d%% full)"
msgstr ""

#: tracepoint.c:1861
msgid ".\n"
msgstr ""

#: tracepoint.c:1864
#, possible-c-format
msgid "Trace buffer has %d bytes free.\n"
msgstr ""

#: tracepoint.c:1869
msgid "Trace will continue if GDB disconnects.\n"
msgstr ""

#: tracepoint.c:1871
msgid "Trace will stop if GDB disconnects.\n"
msgstr ""

#: tracepoint.c:1874
msgid "Trace buffer is circular.\n"
msgstr ""

#: tracepoint.c:1877
#, possible-c-format
msgid "Trace user is %s.\n"
msgstr ""

#: tracepoint.c:1880
#, possible-c-format
msgid "Trace notes: %s.\n"
msgstr ""

#: tracepoint.c:1884
#, possible-c-format
msgid "Looking at trace frame %d, tracepoint %d.\n"
msgstr ""

#: tracepoint.c:1887
msgid "Not looking at any trace frame.\n"
msgstr ""

#. Reporting a run time is more readable than two long numbers.
#: tracepoint.c:1897
#, possible-c-format
msgid "Trace started at %ld.%06ld secs, stopped %ld.%06ld secs later.\n"
msgstr ""

#: tracepoint.c:1904
#, possible-c-format
msgid "Trace started at %ld.%06ld secs.\n"
msgstr ""

#: tracepoint.c:1909
#, possible-c-format
msgid "Trace stopped at %ld.%06ld secs.\n"
msgstr ""

#: tracepoint.c:2062
msgid "Trace is running and will continue after detach; detach anyway? "
msgstr ""

#: tracepoint.c:2068
msgid "Trace is running but will stop on detach; detach anyway? "
msgstr ""

#: tracepoint.c:2143
msgid "Target failed to find requested trace frame."
msgstr ""

#: tracepoint.c:2185
#, possible-c-format
msgid "Found trace frame %d, tracepoint %d\n"
msgstr ""

#: tracepoint.c:2194
msgid "No longer looking at any trace frame\n"
msgstr ""

#. This case may never occur, check.
#: tracepoint.c:2196
msgid "No trace frame found\n"
msgstr ""

#: tracepoint.c:2230 tracepoint.c:2454
msgid "May not look at trace frames while trace is running."
msgstr ""

#: tracepoint.c:2265
msgid "not debugging trace buffer"
msgstr ""

#: tracepoint.c:2267
msgid "already at start of trace buffer"
msgstr ""

#: tracepoint.c:2278
#, possible-c-format
msgid "invalid input (%d is less than zero)"
msgstr ""

#: tracepoint.c:2331
msgid "No current tracepoint -- please supply an argument."
msgstr ""

#: tracepoint.c:2374
msgid "No line number information available."
msgstr ""

#: tracepoint.c:2396
msgid "Cannot find a good line."
msgstr ""

#. Is there any case in which we get here, and have an address
#. which the user would want to see?  If we have debugging
#. symbols and no line numbers?
#: tracepoint.c:2403
#, possible-c-format
msgid "Line number %d is out of range for \"%s\"."
msgstr ""

#: tracepoint.c:2495
msgid "requires an argument (function, line or *addr) to define a scope"
msgstr ""

#: tracepoint.c:2753
msgid "No current trace frame."
msgstr ""

#: tracepoint.c:2758
#, possible-c-format
msgid "No known tracepoint matches 'current' tracepoint #%d."
msgstr ""

#: tracepoint.c:2847
msgid "Buffer too small for source encoding"
msgstr ""

#: tracepoint.c:2852
msgid "Source string too long for buffer"
msgstr ""

#: tracepoint.c:2890
msgid "Target does not support trace notes, user ignored"
msgstr ""

#: tracepoint.c:2914
msgid "Target does not support trace notes, stop note ignored"
msgstr ""

#: tracepoint.c:2971
msgid "could not change traceframe"
msgstr ""

#: tracepoint.c:3124
#, possible-c-format
msgid "Assuming tracepoint %d is same as target's tracepoint %d at %s.\n"
msgstr ""

#: tracepoint.c:3147
#, possible-c-format
msgid "Created tracepoint %d for target's tracepoint %d at %s.\n"
msgstr ""

#: tracepoint.c:3152
#, possible-c-format
msgid ""
"Failed to create tracepoint for target's tracepoint %d at %s, skipping it.\n"
msgstr ""

#: tracepoint.c:3238
#, possible-c-format
msgid "Assuming trace state variable $%s is same as target's variable %d.\n"
msgstr ""

#: tracepoint.c:3246
#, possible-c-format
msgid "Created trace state variable $%s for target's variable %d.\n"
msgstr ""

#: tracepoint.c:3299
#, possible-c-format
msgid ""
"Malformed trace status, at %s\n"
"Status line: '%s'\n"
msgstr ""

#: tracepoint.c:3510
#, possible-c-format
msgid "Unrecognized char '%c' in tracepoint definition, skipping rest"
msgstr ""

#. Don't error out, the target might be sending us optional
#. info that we don't care about.
#: tracepoint.c:3564
#, possible-c-format
msgid "Unrecognized tracepoint piece '%c', ignoring"
msgstr ""

#: tracepoint.c:3619
#, possible-c-format
msgid "bad marker definition: %s"
msgstr ""

#: tracepoint.c:3720
msgid "Data: \""
msgstr ""

#: tracepoint.c:3732
msgid "Probed by static tracepoints: "
msgstr ""

#: tracepoint.c:3825
msgid ""
"Can not parse XML trace frame info; XML support was disabled at compile time"
msgstr ""

#: tracepoint.c:3907
msgid "trace frame info"
msgstr ""

#: tracepoint.c:3998
msgid "List the variables local to a scope."
msgstr ""

#: tracepoint.c:4001
msgid "Tracing of program execution without stopping the program."
msgstr ""

#: tracepoint.c:4005
msgid "Print everything collected at the current tracepoint."
msgstr ""

#: tracepoint.c:4007
msgid ""
"Define a trace state variable.\n"
"Argument is a $-prefixed name, optionally followed\n"
"by '=' and an expression that sets the initial value\n"
"at the start of tracing."
msgstr ""

#: tracepoint.c:4014
msgid ""
"Delete one or more trace state variables.\n"
"Arguments are the names of the variables to delete.\n"
"If no arguments are supplied, delete all variables."
msgstr ""

#. FIXME add a trace variable completer.
#: tracepoint.c:4020
msgid "Status of trace state variables and their values."
msgstr ""

#: tracepoint.c:4024
msgid "List target static tracepoints markers."
msgstr ""

#: tracepoint.c:4027
msgid ""
"Select a trace frame.\n"
"No argument means forward by one frame; '-' means backward by one frame."
msgstr ""

#: tracepoint.c:4032
msgid ""
"Select a trace frame whose PC is outside the given range (exclusive).\n"
"Usage: tfind outside ADDR1, ADDR2"
msgstr ""

#: tracepoint.c:4037
msgid ""
"Select a trace frame whose PC is in the given range (inclusive).\n"
"Usage: tfind range ADDR1, ADDR2"
msgstr ""

#: tracepoint.c:4042
msgid ""
"Select a trace frame by source line.\n"
"Argument can be a line number (with optional source file),\n"
"a function name, or '*' followed by an address.\n"
"Default argument is 'the next source line that was traced'."
msgstr ""

#: tracepoint.c:4049
msgid ""
"Select a trace frame by tracepoint number.\n"
"Default is the tracepoint for the current trace frame."
msgstr ""

#: tracepoint.c:4054
msgid ""
"Select a trace frame by PC.\n"
"Default is the current PC, or the PC of the current trace frame."
msgstr ""

#: tracepoint.c:4059
msgid "De-select any trace frame and resume 'live' debugging."
msgstr ""

#: tracepoint.c:4066
msgid "Select the first trace frame in the trace buffer."
msgstr ""

#: tracepoint.c:4070
msgid "Display the status of the current trace data collection."
msgstr ""

#: tracepoint.c:4072
msgid ""
"Stop trace data collection.\n"
"Usage: tstop [NOTES]...\n"
"Any arguments supplied are recorded with the trace as a stop reason and\n"
"reported by tstatus (if the target supports trace notes)."
msgstr ""

#: tracepoint.c:4078
msgid ""
"Start trace data collection.\n"
"Usage: tstart [NOTES]...\n"
"Any arguments supplied are recorded with the trace as a note and\n"
"reported by tstatus (if the target supports trace notes)."
msgstr ""

#: tracepoint.c:4084
msgid ""
"Ends a list of commands or actions.\n"
"Several GDB commands allow you to enter a list of commands or actions.\n"
"Entering \"end\" on a line by itself is the normal way to terminate\n"
"such a list.\n"
"\n"
"Note: the \"end\" command cannot be used at the gdb prompt."
msgstr ""

#: tracepoint.c:4092
msgid ""
"Specify single-stepping behavior at a tracepoint.\n"
"Argument is number of instructions to trace in single-step mode\n"
"following the tracepoint.  This command is normally followed by\n"
"one or more \"collect\" commands, to specify what to collect\n"
"while single-stepping.\n"
"\n"
"Note: this command can only be used in a tracepoint \"actions\" list."
msgstr ""

#: tracepoint.c:4103
msgid ""
"Specify one or more data items to be collected at a tracepoint.\n"
"Accepts a comma-separated list of (one or more) expressions.  GDB will\n"
"collect all data (variables, registers) referenced by that expression.\n"
"Also accepts the following special arguments:\n"
"    $regs   -- all registers.\n"
"    $args   -- all function arguments.\n"
"    $locals -- all variables local to the block/function scope.\n"
"    $_sdata -- static tracepoint data (ignored for non-static tracepoints).\n"
"Note: this command can only be used in a tracepoint \"actions\" list."
msgstr ""

#: tracepoint.c:4114
msgid ""
"Specify one or more expressions to be evaluated at a tracepoint.\n"
"Accepts a comma-separated list of (one or more) expressions.\n"
"The result of each evaluation will be discarded.\n"
"Note: this command can only be used in a tracepoint \"actions\" list."
msgstr ""

#: tracepoint.c:4120
msgid ""
"Specify the actions to be taken at a tracepoint.\n"
"Tracepoint actions may include collecting of specified data,\n"
"single-stepping, or enabling/disabling other tracepoints,\n"
"depending on target's capabilities."
msgstr ""

#: tracepoint.c:4128
msgid "Set the list of expressions to collect by default."
msgstr ""

#: tracepoint.c:4129
msgid "Show the list of expressions to collect by default."
msgstr ""

#: tracepoint.c:4135
msgid "Set whether tracing continues after GDB disconnects."
msgstr ""

#: tracepoint.c:4136
msgid "Show whether tracing continues after GDB disconnects."
msgstr ""

#: tracepoint.c:4137
msgid ""
"Use this to continue a tracing run even if GDB disconnects\n"
"or detaches from the target.  You can reconnect later and look at\n"
"trace data collected in the meantime."
msgstr ""

#: tracepoint.c:4147
msgid "Set target's use of circular trace buffer."
msgstr ""

#: tracepoint.c:4148
msgid "Show target's use of circular trace buffer."
msgstr ""

#: tracepoint.c:4149
msgid ""
"Use this to make the trace buffer into a circular buffer,\n"
"which will discard traceframes (oldest first) instead of filling\n"
"up and stopping the trace run."
msgstr ""

#: tracepoint.c:4159
msgid "Set requested size of trace buffer."
msgstr ""

#: tracepoint.c:4160
msgid "Show requested size of trace buffer."
msgstr ""

#: tracepoint.c:4161
msgid ""
"Use this to choose a size for the trace buffer.  Some targets\n"
"may have fixed or limited buffer sizes.  Specifying \"unlimited\" or -1\n"
"disables any attempt to set the buffer size and lets the target choose."
msgstr ""

#: tracepoint.c:4169
msgid "Set the user name to use for current and future trace runs."
msgstr ""

#: tracepoint.c:4170
msgid "Show the user name to use for current and future trace runs."
msgstr ""

#: tracepoint.c:4176
msgid "Set notes string to use for current and future trace runs."
msgstr ""

#: tracepoint.c:4177
msgid "Show the notes string to use for current and future trace runs."
msgstr ""

#: tracepoint.c:4183
msgid "Set notes string to use for future tstop commands."
msgstr ""

#: tracepoint.c:4184
msgid "Show the notes string to use for future tstop commands."
msgstr ""

#: tui/tui-source.h:58
msgid "[ No Source Available ]"
msgstr ""

#: tui/tui-regs.c:394
msgid "[ Register Values Unavailable ]"
msgstr ""

#: tui/tui-regs.c:600
#, possible-c-format
msgid "ambiguous register group name '%s'"
msgstr ""

#: tui/tui-regs.c:606
#, possible-c-format
msgid "unknown register group '%s'"
msgstr ""

#: tui/tui-regs.c:615
msgid ""
"\"tui reg\" must be followed by the name of either a register group,\n"
"or one of 'next' or 'prev'.  Known register groups are:\n"
msgstr ""

#: tui/tui-regs.c:661
msgid "TUI command to control the register window."
msgstr ""

#: tui/tui-interp.c:297
msgid "tui_exec called"
msgstr ""

#: tui/tui.c:426
#, possible-c-format
msgid "Cannot enable the TUI when the interpreter is '%s'"
msgstr ""

#: tui/tui.c:431
msgid "Cannot enable the TUI when output is not a terminal"
msgstr ""

#: tui/tui.c:442
#, possible-c-format
msgid "Cannot enable the TUI: error opening terminal [TERM=%s]"
msgstr ""

#: tui/tui.c:464
#, possible-c-format
msgid ""
"Cannot enable the TUI: terminal doesn't support cursor addressing [TERM=%s]"
msgstr ""

#: tui/tui.c:682
msgid "Enable TUI display mode."
msgstr ""

#: tui/tui.c:685
msgid "Disable TUI display mode."
msgstr ""

#: tui/tui-layout.c:260
msgid "Usage: layout prev | next | LAYOUT-NAME"
msgstr ""

#: tui/tui-layout.c:264
msgid "Ambiguous command input."
msgstr ""

#: tui/tui-layout.c:285
#, possible-c-format
msgid "Unrecognized layout: %s"
msgstr ""

#: tui/tui-layout.c:554
msgid ""
"Change the layout of windows.\n"
"Usage: layout prev | next | LAYOUT-NAME\n"
"Layout names are:\n"
"   src   : Displays source and command windows.\n"
"   asm   : Displays disassembly and command windows.\n"
"   split : Displays source, disassembly and command windows.\n"
"   regs  : Displays register window. If existing layout\n"
"           is source/command or assembly/command, the \n"
"           register window is displayed. If the\n"
"           source/assembly/command (split) is displayed, \n"
"           the register window is displayed with \n"
"           the window that has current logical focus."
msgstr ""

#: tui/tui-win.c:198
#, possible-c-format
msgid "The attribute mode to use for the active TUI window border is \"%s\".\n"
msgstr ""

#: tui/tui-win.c:210
#, possible-c-format
msgid "The attribute mode to use for the TUI window borders is \"%s\".\n"
msgstr ""

#: tui/tui-win.c:222
#, possible-c-format
msgid "The kind of border for TUI windows is \"%s\".\n"
msgstr ""

#: tui/tui-win.c:321
msgid "\"tui\" must be followed by the name of a tui command.\n"
msgstr ""

#: tui/tui-win.c:331
msgid "Text User Interface commands."
msgstr ""

#: tui/tui-win.c:358
#, possible-c-format
msgid "TUI resize messaging is %s.\n"
msgstr ""

#: tui/tui-win.c:834 tui/tui-win.c:1005
#, possible-c-format
msgid "Unrecognized window name \"%s\""
msgstr ""

#: tui/tui-win.c:836 tui/tui-win.c:1007
#, possible-c-format
msgid "Window \"%s\" is not visible"
msgstr ""

#: tui/tui-win.c:840
#, possible-c-format
msgid "Focus set to %s window.\n"
msgstr ""

#: tui/tui-win.c:844
#, possible-c-format
msgid ""
"Incorrect Number of Arguments.\n"
"%s"
msgstr ""

#: tui/tui-win.c:852
msgid "The TUI is not active.\n"
msgstr ""

#: tui/tui-win.c:873
msgid "(has focus)"
msgstr ""

#: tui/tui-win.c:920
msgid "Tab width must not be 0"
msgstr ""

#: tui/tui-win.c:933
#, possible-c-format
msgid "TUI tab width is %s spaces.\n"
msgstr ""

#: tui/tui-win.c:957
#, possible-c-format
msgid "TUI source window compactness is %s.\n"
msgstr ""

#: tui/tui-win.c:972
msgid "Tab widths greater than 0 must be specified."
msgstr ""

#: tui/tui-win.c:1039 tui/tui-win.c:1045
#, possible-c-format
msgid ""
"Invalid window height specified.\n"
"%s"
msgstr ""

#: tui/tui-win.c:1381
#, possible-c-format
msgid "Unrecognized window `%s'"
msgstr ""

#: tui/tui-win.c:1383
msgid "Window is not visible"
msgstr ""

#: tui/tui-win.c:1404 tui/tui-win.c:1408
msgid "TUI configuration variables."
msgstr ""

#: tui/tui-win.c:1413
msgid "Refresh the terminal display."
msgstr ""

#: tui/tui-win.c:1415
msgid ""
"Set the width (in characters) of tab stops.\n"
"Usage: tabset N"
msgstr ""

#: tui/tui-win.c:1420
msgid "Set or modify the height of a specified window.\n"
msgstr ""

#: tui/tui-win.c:1431
msgid "List of all displayed windows."
msgstr ""

#: tui/tui-win.c:1432
msgid "Set focus to named window or next/prev window.\n"
msgstr ""

#: tui/tui-win.c:1442
msgid ""
"Scroll window forward.\n"
"Usage: + [WIN] [N]"
msgstr ""

#: tui/tui-win.c:1445
msgid ""
"Scroll window backward.\n"
"Usage: - [WIN] [N]"
msgstr ""

#: tui/tui-win.c:1448
msgid ""
"Scroll window text to the left.\n"
"Usage: < [WIN] [N]"
msgstr ""

#: tui/tui-win.c:1451
msgid ""
"Scroll window text to the right.\n"
"Usage: > [WIN] [N]"
msgstr ""

#: tui/tui-win.c:1457
msgid "Set the kind of border for TUI windows."
msgstr ""

#: tui/tui-win.c:1458
msgid "Show the kind of border for TUI windows."
msgstr ""

#: tui/tui-win.c:1459
msgid ""
"This variable controls the border of TUI windows:\n"
"   space           use a white space\n"
"   ascii           use ascii characters + - | for the border\n"
"   acs             use the Alternate Character Set"
msgstr ""

#: tui/tui-win.c:1469
msgid "Set the attribute mode to use for the TUI window borders."
msgstr ""

#: tui/tui-win.c:1470
msgid "Show the attribute mode to use for the TUI window borders."
msgstr ""

#: tui/tui-win.c:1471
msgid ""
"This variable controls the attributes to use for the window borders:\n"
"   normal          normal display\n"
"   standout        use highlight mode of terminal\n"
"   reverse         use reverse video mode\n"
"   half            use half bright\n"
"   half-standout   use half bright and standout mode\n"
"   bold            use extra bright or bold\n"
"   bold-standout   use extra bright or bold with standout mode"
msgstr ""

#: tui/tui-win.c:1485
msgid "Set the attribute mode to use for the active TUI window border."
msgstr ""

#: tui/tui-win.c:1486
msgid "Show the attribute mode to use for the active TUI window border."
msgstr ""

#: tui/tui-win.c:1487
msgid ""
"This variable controls the attributes to use for the active window border:\n"
"   normal          normal display\n"
"   standout        use highlight mode of terminal\n"
"   reverse         use reverse video mode\n"
"   half            use half bright\n"
"   half-standout   use half bright and standout mode\n"
"   bold            use extra bright or bold\n"
"   bold-standout   use extra bright or bold with standout mode"
msgstr ""

#: tui/tui-win.c:1501
msgid "Set the tab width, in characters, for the TUI."
msgstr ""

#: tui/tui-win.c:1502
msgid "Show the tab witdh, in characters, for the TUI."
msgstr ""

#: tui/tui-win.c:1503
msgid ""
"This variable controls how many spaces are used to display a tab character."
msgstr ""

#: tui/tui-win.c:1509
msgid "Set TUI resize messaging."
msgstr ""

#: tui/tui-win.c:1510
msgid "Show TUI resize messaging."
msgstr ""

#: tui/tui-win.c:1511
msgid "When enabled GDB will print a message when the terminal is resized."
msgstr ""

#: tui/tui-win.c:1519
msgid "Set whether the TUI source window is compact."
msgstr ""

#: tui/tui-win.c:1520
msgid "Show whether the TUI source window is compact."
msgstr ""

#: tui/tui-win.c:1521
msgid ""
"This variable controls whether the TUI source window is shown\n"
"in a compact form.  The compact form puts the source closer to\n"
"the line numbers and uses less horizontal space."
msgstr ""

#: tui/tui-disasm.h:53
msgid "[ No Assembly Available ]"
msgstr ""

#: tui/tui-io.c:877
msgid "Cannot create pipe for readline"
msgstr ""

#: tui/tui-io.c:881
msgid "Cannot redirect readline output"
msgstr ""

#: tui/tui-stack.c:386
msgid ""
"Update the source window and locator to display the current execution point."
msgstr ""

#: typeprint.c:377
msgid "Language not supported."
msgstr ""

#: typeprint.c:420
msgid "<unknown return type>"
msgstr ""

#: typeprint.c:428
#, possible-c-format
msgid "'%s' has unknown type; cast it to its declared type"
msgstr ""

#: typeprint.c:488
#, possible-c-format
msgid "unrecognized flag '%c'"
msgstr ""

#: typeprint.c:494
msgid "flag expected"
msgstr ""

#: typeprint.c:496
msgid "expected space after format"
msgstr ""

#: typeprint.c:673
msgid "internal error: unhandled type in print_type_scalar"
msgstr ""

#: typeprint.c:745
#, possible-c-format
msgid "Printing of methods defined in a class in %s\n"
msgstr ""

#: typeprint.c:762
#, possible-c-format
msgid "Printing of typedefs defined in a class in %s\n"
msgstr ""

#: typeprint.c:791
msgid "Will not print nested types defined in a class\n"
msgstr ""

#: typeprint.c:796
#, possible-c-format
msgid "Will print %s nested types defined in a class\n"
msgstr ""

#: typeprint.c:806
msgid ""
"Print definition of type TYPE.\n"
"Usage: ptype[/FLAGS] TYPE | EXPRESSION\n"
"Argument may be any type (for example a type name defined by typedef,\n"
"or \"struct STRUCT-TAG\" or \"class CLASS-NAME\" or \"union UNION-TAG\"\n"
"or \"enum ENUM-TAG\") or an expression.\n"
"The selected stack frame's lexical context is used to look up the name.\n"
"Contrary to \"whatis\", \"ptype\" always unrolls any typedefs.\n"
"\n"
"Available FLAGS are:\n"
"  /r    print in \"raw\" form; do not substitute typedefs\n"
"  /m    do not print methods defined in a class\n"
"  /M    print methods defined in a class\n"
"  /t    do not print typedefs defined in a class\n"
"  /T    print typedefs defined in a class\n"
"  /o    print offsets and sizes of fields in a struct (like pahole)"
msgstr ""

#: typeprint.c:825
msgid ""
"Print data type of expression EXP.\n"
"Only one level of typedefs is unrolled.  See also \"ptype\"."
msgstr ""

#: typeprint.c:830
msgid "Generic command for showing type-printing settings."
msgstr ""

#: typeprint.c:833
msgid "Generic command for setting how types print."
msgstr ""

#: typeprint.c:837
msgid "Set printing of methods defined in classes."
msgstr ""

#: typeprint.c:838
msgid "Show printing of methods defined in classes."
msgstr ""

#: typeprint.c:844
msgid "Set printing of typedefs defined in classes."
msgstr ""

#: typeprint.c:845
msgid "Show printing of typedefs defined in classes."
msgstr ""

#: typeprint.c:853
msgid ""
"Set the number of recursive nested type definitions to print (\"unlimited\" "
"or -1 to show all)."
msgstr ""

#: typeprint.c:855
msgid "Show the number of recursive nested type definitions to print."
msgstr ""

#: typeprint.c:867
msgid "<not allocated>"
msgstr ""

#: typeprint.c:875
msgid "<not associated>"
msgstr ""

#: ui-out.c:216
msgid ""
"extra table_body call not allowed; there must be only one table_body after a "
"table_begin and before a table_end."
msgstr ""

#: ui-out.c:224
msgid "number of headers differ from number of table columns."
msgstr ""

#: ui-out.c:239
msgid "table header must be specified after table_begin and before table_body."
msgstr ""

#: ui-out.c:358
msgid "tables cannot be nested; table_begin found before previous table_end."
msgstr ""

#: ui-out.c:372
msgid ""
"table_header outside a table is not valid; it must be after a table_begin "
"and before a table_body."
msgstr ""

#: ui-out.c:385
msgid ""
"table_body outside a table is not valid; it must be after a table_begin and "
"before a table_end."
msgstr ""

#: ui-out.c:398
msgid "misplaced table_end or missing table_begin."
msgstr ""

#: ui-out.c:647
msgid "wide_string_arg not supported in vmessage"
msgstr ""

#: ui-out.c:650
msgid "wide_char_arg not supported in vmessage"
msgstr ""

#: ui-out.c:713
msgid "long_double_arg not supported in vmessage"
msgstr ""

#: ui-out.c:716
msgid "dec32float_arg not supported in vmessage"
msgstr ""

#: ui-out.c:719
msgid "dec64float_arg not supported in vmessage"
msgstr ""

#: ui-out.c:722
msgid "dec128float_arg not supported in vmessage"
msgstr ""

#: ui-out.c:843
msgid ""
"table_body missing; table fields must be specified after table_body and "
"inside a list."
msgstr ""

#: ui-out.c:856
msgid "ui-out internal error in handling headers."
msgstr ""

#: unittests/environ-selftests.c:273
msgid "Could not set environment variable for testing."
msgstr ""

#: unittests/copy_bitwise-selftests.c:87
#, possible-c-format
msgid "copy_bitwise %s != %s (%u+%u -> %u)"
msgstr ""

#: unittests/lookup_name_info-selftests.c:44
#, possible-c-format
msgid ""
"%s:%d: make-paramless self-test failed: (completion=%d, lang=%d) \"%s\" -> "
"\"%s\", expected \"%s\""
msgstr ""

#: unittests/vec-utils-selftests.c:53
msgid "detected self move assign"
msgstr ""

#: user-regs.c:243
msgid "List the names of the current user registers."
msgstr ""

#: utils.c:114
#, possible-c-format
msgid "Printing of 8-bit characters in strings as \\nnn is %s.\n"
msgstr ""

#: utils.c:128
#, possible-c-format
msgid "State of pagination is %s.\n"
msgstr ""

#: utils.c:243
#, possible-c-format
msgid ""
"%s\n"
"Unable to dump core, use `ulimit -c unlimited' before executing GDB next "
"time.\n"
msgstr ""

#: utils.c:372
#, possible-c-format
msgid ""
"%s\n"
"Quit this debugging session? "
msgstr ""

#: utils.c:382
msgid ""
"\n"
"This is a bug, please report it."
msgstr ""

#: utils.c:384
#, possible-c-format
msgid ""
"  For instructions, see:\n"
"%s."
msgstr ""

#. Default (yes/batch case) is to dump core.  This leaves a GDB
#. `dropping' so that it is easier to see that something went
#. wrong in GDB.
#: utils.c:399
#, possible-c-format
msgid ""
"%s\n"
"Create a core file of GDB? "
msgstr ""

#: utils.c:512
#, possible-c-format
msgid "Configure what GDB does when %s is detected."
msgstr ""

#: utils.c:515
#, possible-c-format
msgid "Show what GDB does when %s is detected."
msgstr ""

#: utils.c:534
#, possible-c-format
msgid "Set whether GDB should quit when an %s is detected."
msgstr ""

#: utils.c:537
#, possible-c-format
msgid "Show whether GDB will quit when an %s is detected."
msgstr ""

#: utils.c:557
#, possible-c-format
msgid "Set whether GDB should create a core file of GDB when %s is detected."
msgstr ""

#: utils.c:560
#, possible-c-format
msgid "Show whether GDB will create a core file of GDB when %s is detected."
msgstr ""

#: utils.c:685
#, possible-c-format
msgid "virtual memory exhausted: can't allocate %ld bytes."
msgstr ""

#: utils.c:690
msgid "virtual memory exhausted."
msgstr ""

#: utils.c:834
#, possible-c-format
msgid "(%s or %s) [answered %c; input not from terminal]\n"
msgstr ""

#: utils.c:850
#, possible-c-format
msgid "%s%s(%s or %s) %s"
msgstr ""

#. Invalid entries are not defaulted and require another selection.
#: utils.c:898
#, possible-c-format
msgid "Please answer %s or %s.\n"
msgstr ""

#: utils.c:1074
#, possible-c-format
msgid ""
"The escape sequence `\\%c' is equivalent to plain `%c', which has no "
"equivalent\n"
"in the `%s' character set."
msgstr ""

#: utils.c:1185
#, possible-c-format
msgid "Number of lines gdb thinks are in a page is %s.\n"
msgstr ""

#: utils.c:1196
#, possible-c-format
msgid "Number of characters gdb thinks are in a line is %s.\n"
msgstr ""

#: utils.c:2834
#, possible-c-format
msgid "Timestamping debugging messages is %s.\n"
msgstr ""

#: utils.c:2938
#, possible-c-format
msgid "invalid hex \"%s\""
msgstr ""

#: utils.c:2951
#, possible-c-format
msgid "invalid decimal \"%s\""
msgstr ""

#: utils.c:3095
msgid "process-id to attach"
msgstr ""

#: utils.c:3101
#, possible-c-format
msgid "Illegal process-id: %s."
msgstr ""

#: utils.c:3439
msgid "Set number of characters where GDB should wrap lines of its output."
msgstr ""

#: utils.c:3440
msgid "Show number of characters where GDB should wrap lines of its output."
msgstr ""

#: utils.c:3441
msgid ""
"This affects where GDB wraps its output to fit the screen width.\n"
"Setting this to \"unlimited\" or zero prevents GDB from wrapping its output."
msgstr ""

#: utils.c:3448
msgid "Set number of lines in a page for GDB output pagination."
msgstr ""

#: utils.c:3449
msgid "Show number of lines in a page for GDB output pagination."
msgstr ""

#: utils.c:3450
msgid ""
"This affects the number of lines after which GDB will pause\n"
"its output and ask you whether to continue.\n"
"Setting this to \"unlimited\" or zero causes GDB never pause during output."
msgstr ""

#: utils.c:3459
msgid "Set state of GDB output pagination."
msgstr ""

#: utils.c:3460
msgid "Show state of GDB output pagination."
msgstr ""

#: utils.c:3461
msgid ""
"When pagination is ON, GDB pauses at end of each screenful of\n"
"its output and asks you whether to continue.\n"
"Turning pagination off is an alternative to \"set height unlimited\"."
msgstr ""

#: utils.c:3470
msgid "Set printing of 8-bit characters in strings as \\nnn."
msgstr ""

#: utils.c:3471
msgid "Show printing of 8-bit characters in strings as \\nnn."
msgstr ""

#: utils.c:3478
msgid "Set timestamping of debugging messages."
msgstr ""

#: utils.c:3479
msgid "Show timestamping of debugging messages."
msgstr ""

#: utils.c:3480
msgid ""
"When set, debugging messages will be marked with seconds and microseconds."
msgstr ""

#: valarith.c:65
msgid ""
"Cannot perform pointer math on incomplete types, try casting to a known "
"type, or void *."
msgstr ""

#: valarith.c:68
#, possible-c-format
msgid ""
"Cannot perform pointer math on incomplete type \"%s\", try casting to a "
"known type, or void *."
msgstr ""

#: valarith.c:115
msgid ""
"First argument of `-' is a pointer and second argument is neither\n"
"an integer nor a pointer of the same type."
msgstr ""

#: valarith.c:122
msgid "Type size unknown, assuming 1. Try casting to a known type, or void *."
msgstr ""

#: valarith.c:166
msgid "array or string index out of range"
msgstr ""

#: valarith.c:178
msgid "not an array or string"
msgstr ""

#: valarith.c:211
msgid "no such vector element (vector not associated)"
msgstr ""

#: valarith.c:213
msgid "no such vector element (vector not allocated)"
msgstr ""

#: valarith.c:215
msgid "no such vector element"
msgstr ""

#: valarith.c:320
#, possible-c-format
msgid "Could not find %s."
msgstr ""

#: valarith.c:368
msgid "Can't do that binary op on that type"
msgstr ""

#: valarith.c:455 valarith.c:481
msgid "Invalid binary operation specified."
msgstr ""

#: valarith.c:521 valarith.c:635
#, possible-c-format
msgid "member function %s not found"
msgstr ""

#: valarith.c:544
msgid "Can't do that unary op on that type"
msgstr ""

#: valarith.c:595
msgid "Invalid unary operation specified."
msgstr ""

#: valarith.c:730
msgid "unimplemented support for boolean repeats"
msgstr ""

#: valarith.c:734
msgid "can't repeat values of that type"
msgstr ""

#: valarith.c:744
msgid "Strings can only be concatenated with other strings."
msgstr ""

#: valarith.c:777
msgid "Booleans can only be concatenated with other bitstrings or booleans."
msgstr ""

#: valarith.c:780
msgid "unimplemented support for boolean concatenation."
msgstr ""

#. We don't know how to concatenate these operands.
#: valarith.c:785
msgid "illegal operands for concatenation."
msgstr ""

#: valarith.c:799 valarith.c:830
msgid "Attempt to raise 0 to negative power."
msgstr ""

#. The DFP extension to the C language does not allow mixing of
#. * decimal float types with other float types in expressions
#. * (see WDTR 24732, page 12).
#: valarith.c:872
msgid "Mixing decimal floating types with other floating types is not allowed."
msgstr ""

#: valarith.c:891 valarith.c:910
#, possible-c-format
msgid "Don't know how to convert from %s to %s."
msgstr ""

#: valarith.c:994
msgid "Invalid operation on booleans."
msgstr ""

#: valarith.c:1054 valarith.c:1065 valarith.c:1179 valarith.c:1190
msgid "Division by zero"
msgstr ""

#: valarith.c:1144 valarith.c:1273
msgid "Invalid binary operation on numbers."
msgstr ""

#: valarith.c:1319
msgid "conversion of scalar to vector involves truncation"
msgstr ""

#: valarith.c:1350
msgid "Vector operations are only supported among vectors"
msgstr ""

#: valarith.c:1543
msgid "Invalid type combination in equality test."
msgstr ""

#: valarith.c:1616
msgid "Invalid type combination in ordering comparison."
msgstr ""

#: valarith.c:1635
msgid "Argument to positive operation not a number."
msgstr ""

#: valarith.c:1667
msgid "Argument to negate operation not a number."
msgstr ""

#: valarith.c:1700
msgid "Argument to complement operation not an integer, boolean."
msgstr ""

#: valarith.c:1741
msgid "Second argument of 'IN' has wrong type"
msgstr ""

#: valarith.c:1746
msgid "First argument of 'IN' has wrong type"
msgstr ""

#: valarith.c:1750
msgid "First argument of 'IN' not in range"
msgstr ""

#: valops.c:106
#, possible-c-format
msgid "Overload resolution in evaluating C++ functions is %s.\n"
msgstr ""

#: valops.c:125
#, possible-c-format
msgid "\"%s\" exists in this program but is not a function."
msgstr ""

#: valops.c:159
msgid "evaluation of this expression requires the target program to be active"
msgstr ""

#: valops.c:162
#, possible-c-format
msgid ""
"evaluation of this expression requires the program to have a function \"%s\"."
msgstr ""

#: valops.c:186
msgid "No memory available to program now: you need to start the target first"
msgstr ""

#: valops.c:189
msgid "No memory available to program: call to malloc failed"
msgstr ""

#: valops.c:401
msgid "array element type size does not divide object size in cast"
msgstr ""

#: valops.c:513
msgid "value truncated"
msgstr ""

#: valops.c:535
msgid "Cannot convert between vector values of different sizes"
msgstr ""

#: valops.c:538
msgid "can only cast scalar to vector of same size"
msgstr ""

#: valops.c:559
msgid "Invalid type conversion."
msgstr ""

#: valops.c:560
msgid "Invalid cast."
msgstr ""

#: valops.c:610
msgid "Invalid reinterpret_cast"
msgstr ""

#: valops.c:727
msgid "Argument to dynamic_cast must be a pointer or reference type"
msgstr ""

#: valops.c:730
msgid "Argument to dynamic_cast must be pointer to class or `void *'"
msgstr ""

#: valops.c:738
msgid "Argument to dynamic_cast does not have pointer type"
msgstr ""

#: valops.c:743
msgid "Argument to dynamic_cast does not have pointer to class type"
msgstr ""

#: valops.c:756
msgid "Argument to dynamic_cast does not have class type"
msgstr ""

#: valops.c:769
msgid "Ambiguous dynamic_cast"
msgstr ""

#: valops.c:774
msgid "Couldn't determine value's most derived type for dynamic_cast"
msgstr ""

#: valops.c:831
msgid "dynamic_cast failed"
msgstr ""

#: valops.c:877
msgid "Not a numeric type."
msgstr ""

#: valops.c:1070 valops.c:1126
#, possible-c-format
msgid "Can't handle bitfields which don't fit in a %d bit word."
msgstr ""

#: valops.c:1108
msgid "Value being assigned to is no longer active."
msgstr ""

#: valops.c:1136 value.c:1209
msgid "value has been optimized out"
msgstr ""

#: valops.c:1139 value.c:1228
msgid "value is not available"
msgstr ""

#: valops.c:1186
msgid "Left operand of assignment is not an lvalue."
msgstr ""

#: valops.c:1269
msgid "Only values in memory can be extended with '@'."
msgstr ""

#: valops.c:1271
#, possible-c-format
msgid "Invalid number %d of repetitions."
msgstr ""

#: valops.c:1331
#, possible-c-format
msgid "Address requested for identifier \"%s\" which is in register $%s"
msgstr ""

#: valops.c:1338
#, possible-c-format
msgid "Can't take address of \"%s\" which isn't an lvalue."
msgstr ""

#: valops.c:1606
#, possible-c-format
msgid "bad array bounds (%d, %d)"
msgstr ""

#: valops.c:1614
msgid "array elements must all be the same size"
msgstr ""

#: valops.c:1702
msgid "typecmp: no argument list"
msgstr ""

#: valops.c:1780
#, possible-c-format
msgid "base class '%s' is ambiguous in type '%s'"
msgstr ""

#: valops.c:1911 valops.c:2052
msgid "virtual baseclass botch"
msgstr ""

#: valops.c:1997
#, possible-c-format
msgid "cannot resolve overloaded method `%s': no arguments supplied"
msgstr ""

#: valops.c:2133 valops.c:2219
#, possible-c-format
msgid "Attempt to extract a component of a value that is not a %s."
msgstr ""

#: valops.c:2156
#, possible-c-format
msgid "Cannot take address of method %s."
msgstr ""

#: valops.c:2160
#, possible-c-format
msgid "There is no member or method named %s."
msgstr ""

#: valops.c:2172
#, possible-c-format
msgid ""
"One of the arguments you tried to pass to %s could not be converted to what "
"the function wants."
msgstr ""

#: valops.c:2189
#, possible-c-format
msgid "Structure has no component named %s."
msgstr ""

#: valops.c:2230
msgid "No field with matching bitpos and type."
msgstr ""

#: valops.c:2275
#, possible-c-format
msgid "Could not find variant corresponding to discriminant %s"
msgstr ""

#: valops.c:2417
msgid "Attempt to extract a component of a value that is not a struct or union"
msgstr ""

#: valops.c:2547
#, possible-c-format
msgid "Couldn't find method %s%s%s"
msgstr ""

#. Top two contenders are equally good.
#. FIXME: GDB does not support the general ambiguous case.
#. All candidates should be collected and presented the
#. user.
#: valops.c:2714
msgid "Ambiguous overload resolution"
msgstr ""

#. Incomparable top contenders.
#. This is an error incompatible candidates
#. should not have been proposed.
#: valops.c:2719
msgid "Internal error: incompatible overload candidates proposed"
msgstr ""

#: valops.c:2731
msgid "Internal error: unexpected overload comparison result"
msgstr ""

#: valops.c:2747
#, possible-c-format
msgid "Cannot resolve method %s%s%s to any overloaded instance"
msgstr ""

#: valops.c:2752
#, possible-c-format
msgid "Cannot resolve function %s to any overloaded instance"
msgstr ""

#: valops.c:2758
#, possible-c-format
msgid ""
"Using non-standard conversion to match method %s%s%s to supplied arguments"
msgstr ""

#: valops.c:2764
#, possible-c-format
msgid ""
"Using non-standard conversion to match function %s to supplied arguments"
msgstr ""

#: valops.c:3148
msgid "name of destructor must equal name of class"
msgstr ""

#: valops.c:3187
#, possible-c-format
msgid "no constant named \"%s\" in enum \"%s\""
msgstr ""

#: valops.c:3218
msgid "non-aggregate type in value_aggregate_elt"
msgstr ""

#: valops.c:3337
msgid "Internal error: non-aggregate type to value_struct_elt_for_reference"
msgstr ""

#: valops.c:3445
msgid "no member function matches that type instantiation"
msgstr ""

#: valops.c:3471
#, possible-c-format
msgid "non-unique member `%s' requires type instantiation"
msgstr ""

#: valops.c:3478
msgid "no matching member function"
msgstr ""

#: valops.c:3509
#, possible-c-format
msgid "Cannot reference virtual member function \"%s\""
msgstr ""

#: valops.c:3663
msgid "Unexpected value type."
msgstr ""

#: valops.c:3729
#, possible-c-format
msgid ""
"Couldn't retrieve complete object of RTTI type %s; object may be in "
"register(s)."
msgstr ""

#: valops.c:3761
msgid "no `this' in current language"
msgstr ""

#: valops.c:3769
#, possible-c-format
msgid "current stack frame does not contain a variable named `%s'"
msgstr ""

#: valops.c:3812
msgid "array not allocated"
msgstr ""

#: valops.c:3814
msgid "array not associated"
msgstr ""

#: valops.c:3818
msgid "slice from bad array or bitstring"
msgstr ""

#: valops.c:3822
msgid "slice out of range"
msgstr ""

#: valops.c:3909
msgid "cannot cast non-number to complex"
msgstr ""

#: valops.c:3916
msgid "Set overload resolution in evaluating C++ functions."
msgstr ""

#: valops.c:3917
msgid "Show overload resolution in evaluating C++ functions."
msgstr ""

#: valprint.c:152
#, possible-c-format
msgid "Limit on string chars or array elements to print is %s.\n"
msgstr ""

#: valprint.c:166
#, possible-c-format
msgid "Default input radix for entering numbers is %s.\n"
msgstr ""

#: valprint.c:176
#, possible-c-format
msgid "Default output radix for printing of values is %s.\n"
msgstr ""

#: valprint.c:187
#, possible-c-format
msgid "Printing of array indexes is %s.\n"
msgstr ""

#: valprint.c:198
#, possible-c-format
msgid "Threshold for repeated print elements is %s.\n"
msgstr ""

#: valprint.c:209
#, possible-c-format
msgid "Printing of char arrays to stop at first null char is %s.\n"
msgstr ""

#: valprint.c:220
#, possible-c-format
msgid "Pretty formatting of structures is %s.\n"
msgstr ""

#: valprint.c:229
#, possible-c-format
msgid "Pretty formatting of arrays is %s.\n"
msgstr ""

#: valprint.c:240
#, possible-c-format
msgid "Printing of unions interior to structures is %s.\n"
msgstr ""

#: valprint.c:250
#, possible-c-format
msgid "Printing of addresses is %s.\n"
msgstr ""

#: valprint.c:258
#, possible-c-format
msgid "Printing of symbols when printing pointers is %s.\n"
msgstr ""

#: valprint.c:374
msgid "<optimized out>"
msgstr ""

#: valprint.c:380
msgid "<not saved>"
msgstr ""

#: valprint.c:392
msgid "<invalid address>"
msgstr ""

#: valprint.c:1005
#, possible-c-format
msgid "Unhandled type code %d in symbol table."
msgstr ""

#: valprint.c:1122
msgid "<address of value unknown>"
msgstr ""

#: valprint.c:1147
#, possible-c-format
msgid "<internal function %s>"
msgstr ""

#: valprint.c:1389
msgid "Value out of range."
msgstr ""

#: valprint.c:1577 valprint.c:1627
msgid "Internal error in octal conversion;"
msgstr ""

#: valprint.c:2640
#, possible-c-format
msgid " <repeats %u times>"
msgstr ""

#: valprint.c:2900
#, possible-c-format
msgid "<error: %ps>"
msgstr ""

#: valprint.c:2914
#, possible-c-format
msgid "Maximum print depth is %s.\n"
msgstr ""

#: valprint.c:2947
#, possible-c-format
msgid "Nonsense input radix ``decimal %u''; input radix unchanged."
msgstr ""

#: valprint.c:2953
#, possible-c-format
msgid "Input radix now set to decimal %u, hex %x, octal %o.\n"
msgstr ""

#: valprint.c:2989
#, possible-c-format
msgid "Unsupported output radix ``decimal %u''; output radix unchanged."
msgstr ""

#: valprint.c:2996
#, possible-c-format
msgid "Output radix now set to decimal %u, hex %x, octal %o.\n"
msgstr ""

#: valprint.c:3020
#, possible-c-format
msgid "Input and output radices now set to decimal %u, hex %x, octal %o.\n"
msgstr ""

#: valprint.c:3035
#, possible-c-format
msgid "Input and output radices set to decimal %u, hex %x, octal %o.\n"
msgstr ""

#: valprint.c:3041
#, possible-c-format
msgid "Input radix set to decimal %u, hex %x, octal %o.\n"
msgstr ""

#: valprint.c:3044
#, possible-c-format
msgid "Output radix set to decimal %u, hex %x, octal %o.\n"
msgstr ""

#: valprint.c:3085
#, possible-c-format
msgid "Printing of C++ virtual function tables is %s.\n"
msgstr ""

#: valprint.c:3097
#, possible-c-format
msgid "Printing of object's derived type based on vtable info is %s.\n"
msgstr ""

#: valprint.c:3108
#, possible-c-format
msgid "Printing of C++ static members is %s.\n"
msgstr ""

#. show_cmd_cb
#: valprint.c:3131
msgid "Set printing of addresses."
msgstr ""

#: valprint.c:3132
msgid "Show printing of addresses."
msgstr ""

#. show_cmd_cb
#: valprint.c:3140
msgid "Set pretty formatting of arrays."
msgstr ""

#: valprint.c:3141
msgid "Show pretty formatting of arrays."
msgstr ""

#. show_cmd_cb
#: valprint.c:3149
msgid "Set printing of array indexes."
msgstr ""

#: valprint.c:3150
msgid "Show printing of array indexes."
msgstr ""

#. show_cmd_cb
#: valprint.c:3158
msgid "Set limit on string chars or array elements to print."
msgstr ""

#: valprint.c:3159
msgid "Show limit on string chars or array elements to print."
msgstr ""

#: valprint.c:3160
msgid "\"unlimited\" causes there to be no limit."
msgstr ""

#. show_cmd_cb
#: valprint.c:3167
msgid "Set maximum print depth for nested structures, unions and arrays."
msgstr ""

#: valprint.c:3168
msgid "Show maximum print depth for nested structures, unions, and arrays."
msgstr ""

#: valprint.c:3169
msgid ""
"When structures, unions, or arrays are nested beyond this depth then they\n"
"will be replaced with either '{...}' or '(...)' depending on the language.\n"
"Use \"unlimited\" to print the complete structure."
msgstr ""

#. show_cmd_cb
#: valprint.c:3178
msgid "Set printing of char arrays to stop at first null char."
msgstr ""

#: valprint.c:3179
msgid "Show printing of char arrays to stop at first null char."
msgstr ""

#. show_cmd_cb
#: valprint.c:3187 valprint.c:3251
msgid "Set printing of C++ virtual function tables."
msgstr ""

#: valprint.c:3188 valprint.c:3252
msgid "Show printing of C++ virtual function tables."
msgstr ""

#. show_cmd_cb
#: valprint.c:3196
msgid "Set pretty formatting of structures."
msgstr ""

#: valprint.c:3197
msgid "Show pretty formatting of structures."
msgstr ""

#. show_cmd_cb
#: valprint.c:3205
msgid "Set whether to print values in raw form."
msgstr ""

#: valprint.c:3206
msgid "Show whether to print values in raw form."
msgstr ""

#: valprint.c:3207
msgid ""
"If set, values are printed in raw form, bypassing any\n"
"pretty-printers for that value."
msgstr ""

#. show_cmd_cb
#: valprint.c:3215
msgid "Set threshold for repeated print elements."
msgstr ""

#: valprint.c:3216
msgid "Show threshold for repeated print elements."
msgstr ""

#: valprint.c:3217
msgid "\"unlimited\" causes all elements to be individually printed."
msgstr ""

#. show_cmd_cb
#: valprint.c:3224
msgid "Set printing of C++ static members."
msgstr ""

#: valprint.c:3225
msgid "Show printing of C++ static members."
msgstr ""

#. show_cmd_cb
#: valprint.c:3233
msgid "Set printing of symbol names when printing pointers."
msgstr ""

#: valprint.c:3234
msgid "Show printing of symbol names when printing pointers."
msgstr ""

#. show_cmd_cb
#: valprint.c:3242
msgid "Set printing of unions interior to structures."
msgstr ""

#: valprint.c:3243
msgid "Show printing of unions interior to structures."
msgstr ""

#: valprint.c:3271
msgid "Generic command for setting how things print."
msgstr ""

#: valprint.c:3278
msgid "Generic command for showing print settings."
msgstr ""

#: valprint.c:3284
msgid "Generic command for setting what things to print in \"raw\" mode."
msgstr ""

#: valprint.c:3291
msgid "Generic command for showing \"print raw\" settings."
msgstr ""

#: valprint.c:3301
msgid "Set default input radix for entering numbers."
msgstr ""

#: valprint.c:3302
msgid "Show default input radix for entering numbers."
msgstr ""

#: valprint.c:3309
msgid "Set default output radix for printing of values."
msgstr ""

#: valprint.c:3310
msgid "Show default output radix for printing of values."
msgstr ""

#. The "set radix" and "show radix" commands are special in that
#. they are like normal set and show commands but allow two normally
#. independent variables to be either set or shown with a single
#. command.  So the usual deprecated_add_set_cmd() and [deleted]
#. add_show_from_set() commands aren't really appropriate.
#. FIXME: i18n: With the new add_setshow_integer command, that is no
#. longer true - show can display anything.
#: valprint.c:3323
msgid ""
"Set default input and output number radices.\n"
"Use 'set input-radix' or 'set output-radix' to independently set each.\n"
"Without an argument, sets both radices back to the default value of 10."
msgstr ""

#: valprint.c:3328
msgid ""
"Show the default input and output number radices.\n"
"Use 'show input-radix' or 'show output-radix' to independently show each."
msgstr ""

#: value.c:973
#, possible-c-format
msgid "max-value-size set too low, increasing to %d bytes"
msgstr ""

#: value.c:985
msgid "Maximum value size is unlimited.\n"
msgstr ""

#: value.c:987
#, possible-c-format
msgid "Maximum value size is %d bytes.\n"
msgstr ""

#: value.c:1005
#, possible-c-format
msgid "value of type `%s' requires %u bytes, which is more than max-value-size"
msgstr ""

#: value.c:1008
#, possible-c-format
msgid "value requires %u bytes, which is more than max-value-size"
msgstr ""

#: value.c:1218
msgid "register has not been saved in frame"
msgstr ""

#: value.c:1818
msgid "The history is empty."
msgstr ""

#: value.c:1820
msgid "There is only one value in the history."
msgstr ""

#: value.c:1822
#, possible-c-format
msgid "History does not go back to $$%d."
msgstr ""

#: value.c:1825
#, possible-c-format
msgid "History has not yet reached $%d."
msgstr ""

#: value.c:1971
msgid "Init-if-undefined requires an assignment expression."
msgstr ""

#: value.c:1976
msgid "The first parameter to init-if-undefined should be a GDB variable."
msgstr ""

#: value.c:2149
msgid "bad kind"
msgstr ""

#. We can never get a component of any other kind.
#: value.c:2243
msgid "set_internalvar_component"
msgstr ""

#: value.c:2254
#, possible-c-format
msgid "Cannot overwrite convenience function %s"
msgstr ""

#. This text does not mention convenience functions on purpose.
#. The user can't create them except via Python, and if Python support
#. is installed this message will never be printed ($_streq will
#. exist).
#: value.c:2565
msgid ""
"No debugger convenience variables now defined.\n"
"Convenience variables have names starting with \"$\";\n"
"use \"set\" as in \"set $foo = 5\" to define them.\n"
msgstr ""

#: value.c:2789
msgid "Value can't be converted to integer."
msgstr ""

#: value.c:2822
msgid "Invalid floating value found in program."
msgstr ""

#. FIXME: would like to include fieldval in the message, but
#. we don't have a sprintf_longest.
#: value.c:3301
#, possible-c-format
msgid "Value does not fit in %s bits."
msgstr ""

#: value.c:3360
#, possible-c-format
msgid "Unexpected type (%d) encountered for integer constant."
msgstr ""

#: value.c:3402
#, possible-c-format
msgid "Unexpected type (%d) encountered for unsigned integer constant."
msgstr ""

#: value.c:3702
msgid "Function return type unknown."
msgstr ""

#: value.c:3833
msgid "infinite loop while fetching a register"
msgstr ""

#: value.c:3928
msgid "Unexpected lazy value type."
msgstr ""

#: value.c:3943
msgid "You must provide one argument for $_isvoid."
msgstr ""

#: value.c:3959
msgid "You must provide one argument for $_creal."
msgstr ""

#: value.c:3964 value.c:3983
msgid "expected a complex number"
msgstr ""

#: value.c:3978
msgid "You must provide one argument for $_cimag."
msgstr ""

#: value.c:4133
msgid ""
"Debugger convenience (\"$foo\") variables and functions.\n"
"Convenience variables are created when you assign them values;\n"
"thus, \"set $foo=1\" gives \"$foo\" the value 1.  Values may be any type.\n"
"\n"
"A few convenience variables are given values automatically:\n"
"\"$_\"holds the last address examined with \"x\" or \"info lines\",\n"
"\"$__\" holds the contents of the last address examined with \"x\".\n"
"\n"
"Convenience functions are defined via the Python API."
msgstr ""

#: value.c:4148
msgid "Elements of value history around item number IDX (or last ten)."
msgstr ""

#: value.c:4152
msgid ""
"Initialize a convenience variable if necessary.\n"
"init-if-undefined VARIABLE = EXPRESSION\n"
"Set an internal VARIABLE to the result of the EXPRESSION if it does not\n"
"exist or does not contain a value.  The EXPRESSION is not evaluated if the\n"
"VARIABLE is already initialized."
msgstr ""

#: value.c:4159
msgid "Placeholder command for showing help on convenience functions."
msgstr ""

#: value.c:4163
msgid ""
"Check whether an expression is void.\n"
"Usage: $_isvoid (expression)\n"
"Return 1 if the expression is void, zero otherwise."
msgstr ""

#: value.c:4169
msgid ""
"Extract the real part of a complex number.\n"
"Usage: $_creal (expression)\n"
"Return the real part of a complex number, the type depends on the\n"
"type of a complex number."
msgstr ""

#: value.c:4176
msgid ""
"Extract the imaginary part of a complex number.\n"
"Usage: $_cimag (expression)\n"
"Return the imaginary part of a complex number, the type depends on the\n"
"type of a complex number."
msgstr ""

#: value.c:4184
msgid "Set maximum sized value gdb will load from the inferior."
msgstr ""

#: value.c:4185
msgid "Show maximum sized value gdb will load from the inferior."
msgstr ""

#: value.c:4186
msgid ""
"Use this to control the maximum size, in bytes, of a value that gdb\n"
"will load from the inferior.  Setting this value to 'unlimited'\n"
"disables checking.\n"
"Setting this does not invalidate already allocated values, it only\n"
"prevents future values, larger than this size, from being allocated."
msgstr ""

#: varobj.c:49
#, possible-c-format
msgid "Varobj debugging is %s.\n"
msgstr ""

#: varobj.c:355
msgid "Failed to find the specified frame"
msgstr ""

#: varobj.c:696
msgid "requested an iterator from a non-dynamic varobj"
msgstr ""

#: varobj.c:951
msgid "Invalid variable object (child of a dynamic varobj)"
msgstr ""

#: varobj.c:1121
msgid "Cannot instantiate printer for default visualizer"
msgstr ""

#: varobj.c:1462
#, possible-c-format
msgid "Could not evaluate visualizer expression: %s"
msgstr ""

#: varobj.c:1471
msgid "Python support required"
msgstr ""

#: varobj.c:1812
msgid "Duplicate variable object name"
msgstr ""

#: varobj.c:1895
#, possible-c-format
msgid "Assertion failed: Could not find varobj \"%s\" in root list"
msgstr ""

#: varobj.c:2530
msgid "Set varobj debugging."
msgstr ""

#: varobj.c:2531
msgid "Show varobj debugging."
msgstr ""

#: varobj.c:2532
msgid "When non-zero, varobj debugging is enabled."
msgstr ""

#: windows-nat.c:408
#, possible-c-format
msgid "SuspendThread (tid=0x%x) failed. (winerr %u)"
msgstr ""

#: windows-nat.c:527
#, possible-c-format
msgid "[%s exited with code %u]\n"
msgstr ""

#: windows-nat.c:758
msgid "dll path too long"
msgstr ""

#. We did not find any DLL that was previously loaded at this address,
#. so register a complaint.  We do not report an error, because we have
#. observed that this may be happening under some circumstances.  For
#. instance, running 32bit applications on x64 Windows causes us to receive
#. 4 mysterious UNLOAD_DLL_DEBUG_EVENTs during the startup phase (these
#. events are apparently caused by the WOW layer, the interface between
#. 32bit and 64bit worlds).
#: windows-nat.c:919
#, possible-c-format
msgid "dll starting at %s not found."
msgstr ""

#: windows-nat.c:954
msgid "signal-event requires an argument (integer event id)"
msgstr ""

#: windows-nat.c:960
#, possible-c-format
msgid "Failed to convert `%s' to event id"
msgstr ""

#: windows-nat.c:1369
#, possible-c-format
msgid ""
"Failed to resume program execution (ContinueDebugEvent failed, error %u)"
msgstr ""

#: windows-nat.c:1388
#, possible-c-format
msgid "OpenProcess call failed, GetLastError = %u"
msgstr ""

#: windows-nat.c:1510
msgid "Could not interrupt program.  Press Ctrl-c in the program console."
msgstr ""

#: windows-nat.c:1615
#, possible-c-format
msgid "During startup program exited with code 0x%x."
msgstr ""

#: windows-nat.c:1986
#, possible-c-format
msgid "Can't attach to process %u (error %u)"
msgstr ""

#: windows-nat.c:2017
#, possible-c-format
msgid "Can't detach process %u (error %u)"
msgstr ""

#: windows-nat.c:2074 windows-nat.c:2084
#, possible-c-format
msgid "Error getting executable filename: %u."
msgstr ""

#: windows-nat.c:2078
#, possible-c-format
msgid "Error converting executable filename to POSIX: %d."
msgstr ""

#: windows-nat.c:2551
msgid "No executable specified, use `target exec'."
msgstr ""

#: windows-nat.c:2579 windows-nat.c:2584
#, possible-c-format
msgid "Error starting executable: %d"
msgstr ""

#: windows-nat.c:2595
#, possible-c-format
msgid "Error starting executable via shell: %d"
msgstr ""

#: windows-nat.c:2614
#, possible-c-format
msgid "Error converting inferior cwd: %d"
msgstr ""

#: windows-nat.c:2713
#, possible-c-format
msgid "Error in redirection: %s."
msgstr ""

#: windows-nat.c:2730
#, possible-c-format
msgid "Warning: Failed to open TTY %s, error %#x."
msgstr ""

#: windows-nat.c:2814
#, possible-c-format
msgid "Error creating process %s, (error %u)."
msgstr ""

#: windows-nat.c:3053
msgid ""
"Signal a crashed process with event ID, to allow its debugging.\n"
"This command is needed in support of setting up GDB as JIT debugger on MS-"
"Windows.  The command should be invoked from the GDB command line using the "
"'-ex' command-line option.  The ID of the event that blocks the crashed "
"process will be supplied by the Windows JIT debugging mechanism."
msgstr ""

#: windows-nat.c:3061
msgid "Set use of shell to start subprocess."
msgstr ""

#: windows-nat.c:3062
msgid "Show use of shell to start subprocess."
msgstr ""

#: windows-nat.c:3069
msgid "Break when an exception is detected in the Cygwin DLL itself."
msgstr ""

#: windows-nat.c:3070
msgid "Show whether gdb breaks on exceptions in the Cygwin DLL itself."
msgstr ""

#: windows-nat.c:3077
msgid "Set creation of new console when creating child process."
msgstr ""

#: windows-nat.c:3078
msgid "Show creation of new console when creating child process."
msgstr ""

#: windows-nat.c:3084
msgid "Set creation of new group when creating child process."
msgstr ""

#: windows-nat.c:3085
msgid "Show creation of new group when creating child process."
msgstr ""

#: windows-nat.c:3091
msgid "Set whether to display execution in child process."
msgstr ""

#: windows-nat.c:3092
msgid "Show whether to display execution in child process."
msgstr ""

#: windows-nat.c:3098
msgid "Set whether to display kernel events in child process."
msgstr ""

#: windows-nat.c:3099
msgid "Show whether to display kernel events in child process."
msgstr ""

#: windows-nat.c:3105
msgid "Set whether to display memory accesses in child process."
msgstr ""

#: windows-nat.c:3106
msgid "Show whether to display memory accesses in child process."
msgstr ""

#: windows-nat.c:3113
msgid "Set whether to display kernel exceptions in child process."
msgstr ""

#: windows-nat.c:3114
msgid "Show whether to display kernel exceptions in child process."
msgstr ""

#: windows-nat.c:3123
msgid "Display selectors infos."
msgstr ""

#: windows-nat.c:3137
#, possible-c-format
msgid "Invalid register %d in cygwin_set_dr.\n"
msgstr ""

#: windows-nat.c:3221
#, possible-c-format
msgid "obsolete '%s' found. Rename to '%s'."
msgstr ""

#. This will probably fail on Windows 9x/Me.  Let the user know
#. that we're missing some functionality.
#: windows-nat.c:3346
msgid ""
"cannot automatically find executable file or library to read symbols.\n"
"Use \"file\" or \"dll\" command to load executable/libraries directly."
msgstr ""

#: windows-tdep.c:255
msgid "Unable to read tlb"
msgstr ""

#: windows-tdep.c:265
msgid "Impossible to change the Thread Local Base"
msgstr ""

#: windows-tdep.c:329
#, possible-c-format
msgid "Unable to get thread local base for %s\n"
msgstr ""

#: windows-tdep.c:337
#, possible-c-format
msgid "Unable to read thread information block for %s at address %s\n"
msgstr ""

#: windows-tdep.c:344
#, possible-c-format
msgid "Thread Information Block %s at %s\n"
msgstr ""

#: windows-tdep.c:356
#, possible-c-format
msgid "%s is 0x%s\n"
msgstr ""

#: windows-tdep.c:358
#, possible-c-format
msgid "TIB[0x%s] is 0x%s\n"
msgstr ""

#: windows-tdep.c:441
#, possible-c-format
msgid "Show all non-zero elements of Thread Information Block is %s.\n"
msgstr ""

#: windows-tdep.c:458
msgid "Print information specific to Win32 debugging."
msgstr ""

#: windows-tdep.c:497
msgid "Display thread information block."
msgstr ""

#: windows-tdep.c:503
msgid "Set whether to display all non-zero fields of thread information block."
msgstr ""

#: windows-tdep.c:504
msgid ""
"Show whether to display all non-zero fields of thread information block."
msgstr ""

#: windows-tdep.c:505
msgid ""
"Use \"on\" to enable, \"off\" to disable.\n"
"If enabled, all non-zero fields of thread information block are displayed,\n"
"even if their meaning is unknown."
msgstr ""

#: x86-bsd-nat.c:62
msgid "Couldn't read debug registers"
msgstr ""

#: x86-bsd-nat.c:74
msgid "Couldn't get debug registers"
msgstr ""

#: x86-bsd-nat.c:87
msgid "Couldn't write debug registers"
msgstr ""

#: x86-linux-nat.c:131
msgid "Couldn't get CS register"
msgstr ""

#: x86-linux-nat.c:140
msgid "Couldn't get DS register"
msgstr ""

#: x86-linux-nat.c:145
msgid "Can't debug 64-bit process with 32-bit GDB"
msgstr ""

#: x86-nat.c:278
msgid "Set whether to show variables that mirror the x86 debug registers."
msgstr ""

#: x86-nat.c:279
msgid "Show whether to show variables that mirror the x86 debug registers."
msgstr ""

#: xcoffread.c:185
msgid "line numbers off, `.bf' symbol not found"
msgstr ""

#: xcoffread.c:191
#, possible-c-format
msgid "Mismatched .ef symbol ignored starting at symnum %d"
msgstr ""

#. In xcoff, we assume include files cannot be nested (not in .c files
#. of course, but in corresponding .s files.).
#. This can happen with old versions of GCC.
#. GCC 2.3.3-930426 does not exhibit this on a test case which
#. a user said produced the message for him.
#: xcoffread.c:545
msgid "Nested C_BINCL symbols"
msgstr ""

#: xcoffread.c:562
msgid "Mismatched C_BINCL/C_EINCL pair"
msgstr ""

#: xcoffread.c:845
msgid "Bad line table offset in C_EINCL directive"
msgstr ""

#: xcoffread.c:966 xcoffread.c:980
msgid "Unexpected symbol continuation"
msgstr ""

#: xcoffread.c:1435
#, possible-c-format
msgid "Unrecognized storage class %d."
msgstr ""

#: xcoffread.c:1619
#, possible-c-format
msgid "Unexpected storage class: %d"
msgstr ""

#: xcoffread.c:1706
msgid "Invalid symbol offset"
msgstr ""

#: xcoffread.c:1963
#, possible-c-format
msgid "cannot seek to string table in %s: %s"
msgstr ""

#: xcoffread.c:1990
#, possible-c-format
msgid "cannot read string table from %s: %s"
msgstr ""

#: xcoffread.c:1993
msgid "bad symbol file: string table does not end with null character"
msgstr ""

#: xcoffread.c:2340
msgid "More than one XMC_TC0 symbol found."
msgstr ""

#: xcoffread.c:2489
#, possible-c-format
msgid "Storage class %d not recognized during scan"
msgstr ""

#: xcoffread.c:2962
#, possible-c-format
msgid "Error reading .debug section of `%s': %s"
msgstr ""

#: xcoffread.c:2975
#, possible-c-format
msgid "Error reading symbols from %s: %s"
msgstr ""

#: xcoffread.c:2983
msgid "reading symbol table"
msgstr ""

#: xml-support.c:267
#, possible-c-format
msgid "Entering element <%s>"
msgstr ""

#: xml-support.c:292
#, possible-c-format
msgid "Element <%s> unknown"
msgstr ""

#: xml-support.c:297
#, possible-c-format
msgid "Element <%s> only expected once"
msgstr ""

#: xml-support.c:320
#, possible-c-format
msgid "Attribute \"%s\" missing a value"
msgstr ""

#: xml-support.c:327
#, possible-c-format
msgid "Required attribute \"%s\" of <%s> not specified"
msgstr ""

#: xml-support.c:336
#, possible-c-format
msgid "Parsing attribute %s=\"%s\""
msgstr ""

#: xml-support.c:361
#, possible-c-format
msgid "Ignoring unknown attribute %s"
msgstr ""

#: xml-support.c:409
#, possible-c-format
msgid "Leaving element <%s>"
msgstr ""

#: xml-support.c:416
#, possible-c-format
msgid "Required element <%s> is missing"
msgstr ""

#: xml-support.c:525
#, possible-c-format
msgid "could not locate built-in DTD %s"
msgstr ""

#: xml-support.c:568
#, possible-c-format
msgid "XML_UseForeignDTD failed: %s"
msgstr ""

#: xml-support.c:585
#, possible-c-format
msgid ""
"Starting:\n"
"%s"
msgstr ""

#: xml-support.c:611
#, possible-c-format
msgid "while parsing %s (at line %d): %s"
msgstr ""

#: xml-support.c:614
#, possible-c-format
msgid "while parsing %s: %s"
msgstr ""

#: xml-support.c:662
#, possible-c-format
msgid "Can't convert \"%s\" to an integer"
msgstr ""

#: xml-support.c:678
#, possible-c-format
msgid "Can't convert %s=\"%s\" to an integer"
msgstr ""

#: xml-support.c:714
#, possible-c-format
msgid "Unknown attribute value %s=\"%s\""
msgstr ""

#: xml-support.c:786
#, possible-c-format
msgid "Processing XInclude of \"%s\""
msgstr ""

#: xml-support.c:789
#, possible-c-format
msgid "Maximum XInclude depth (%d) exceeded"
msgstr ""

#: xml-support.c:795
#, possible-c-format
msgid "Could not load XML document \"%s\""
msgstr ""

#: xml-support.c:801
#, possible-c-format
msgid "Parsing \"%s\" failed"
msgstr ""

#: xml-support.c:908
msgid "XInclude processing succeeded."
msgstr ""

#: xml-support.c:967
#, possible-c-format
msgid "XML debugging is %s.\n"
msgstr ""

#: xml-support.c:996
msgid "seek to end of file"
msgstr ""

#: xml-support.c:1005
#, possible-c-format
msgid "Read error from \"%s\""
msgstr ""

#: xml-support.c:1017
msgid "Set XML parser debugging."
msgstr ""

#: xml-support.c:1018
msgid "Show XML parser debugging."
msgstr ""

#: xml-support.c:1019
msgid "When set, debugging messages for XML parsers are displayed."
msgstr ""

#: xml-syscall.c:44
msgid ""
"Can not parse XML syscalls information; XML support was disabled at compile "
"time."
msgstr ""

#: xml-syscall.c:258
#, possible-c-format
msgid "Unknown attribute name '%s'."
msgstr ""

#: xml-syscall.c:298
msgid "syscalls info"
msgstr ""

#: xml-syscall.c:306
msgid "Could not load XML syscalls info; ignoring"
msgstr ""

#: xml-syscall.c:365
#, possible-c-format
msgid "Could not load the syscall XML file `%s/%s'."
msgstr ""

#: xml-syscall.c:368
msgid "There is no XML file to open."
msgstr ""

#: xml-syscall.c:370
msgid ""
"GDB will not be able to display syscall names nor to verify if\n"
"any provided syscall numbers are valid."
msgstr ""

#: xml-tdesc.c:52
msgid ""
"Can not parse XML target description; XML support was disabled at compile "
"time"
msgstr ""

#: xml-tdesc.c:105
#, possible-c-format
msgid "Target description specified unknown architecture \"%s\""
msgstr ""

#: xml-tdesc.c:122
#, possible-c-format
msgid "Target description specified unknown osabi \"%s\""
msgstr ""

#: xml-tdesc.c:154
#, possible-c-format
msgid "Target description has unsupported version \"%s\""
msgstr ""

#: xml-tdesc.c:213
#, possible-c-format
msgid "Register \"%s\" has unknown type \"%s\""
msgstr ""

#: xml-tdesc.c:262
#, possible-c-format
msgid "Struct size %s is larger than maximum (%d)"
msgstr ""

#: xml-tdesc.c:283
#, possible-c-format
msgid "Flags size %s is larger than maximum (%d)"
msgstr ""

#: xml-tdesc.c:304
#, possible-c-format
msgid "Enum size %s is larger than maximum (%d)"
msgstr ""

#: xml-tdesc.c:348
#, possible-c-format
msgid "Field start %s is larger than maximum (%d)"
msgstr ""

#: xml-tdesc.c:364
#, possible-c-format
msgid "Field end %s is larger than maximum (%d)"
msgstr ""

#: xml-tdesc.c:380
msgid "Missing end value"
msgstr ""

#: xml-tdesc.c:384
msgid "Bitfields must live in explicitly sized types"
msgstr ""

#: xml-tdesc.c:391
msgid "Boolean fields must be one bit in size"
msgstr ""

#: xml-tdesc.c:396
#, possible-c-format
msgid "Bitfield \"%s\" goes past 64 bits (unsupported)"
msgstr ""

#: xml-tdesc.c:404
#, possible-c-format
msgid "Bitfield \"%s\" has start after end"
msgstr ""

#: xml-tdesc.c:407
#, possible-c-format
msgid "Bitfield \"%s\" does not fit in struct"
msgstr ""

#: xml-tdesc.c:418
msgid "End specified but not start"
msgstr ""

#: xml-tdesc.c:425
#, possible-c-format
msgid "Explicitly sized type cannot contain non-bitfield \"%s\""
msgstr ""

#: xml-tdesc.c:430
#, possible-c-format
msgid "Field \"%s\" references undefined type \"%s\""
msgstr ""

#: xml-tdesc.c:437
#, possible-c-format
msgid "Field \"%s\" has neither type nor bit position"
msgstr ""

#: xml-tdesc.c:462
#, possible-c-format
msgid "Enum value %s is larger than maximum (%d)"
msgstr ""

#: xml-tdesc.c:490
#, possible-c-format
msgid "Vector size %s is larger than maximum (%d)"
msgstr ""

#: xml-tdesc.c:496
#, possible-c-format
msgid "Vector \"%s\" references undefined type \"%s\""
msgstr ""

#: xml-tdesc.c:629 xml-tdesc.c:646 xml-tdesc.c:742
msgid "target description"
msgstr ""

#: xml-tdesc.c:632 xml-tdesc.c:655 xml-tdesc.c:746
msgid "Could not load XML target description; ignoring"
msgstr ""

#: xml-tdesc.c:672
#, possible-c-format
msgid "Could not open \"%s\""
msgstr ""

#: xml-tdesc.c:729
msgid ""
"Can not fetch XML target description; XML support was disabled at compile "
"time"
msgstr ""

#: xml-tdesc.c:760
msgid "xincludes are unsupported with this method"
msgstr ""

#: xstormy16-tdep.c:113
#, possible-c-format
msgid "xstormy16_register_name: illegal register number %d"
msgstr ""

#: xtensa-linux-nat.c:257 xtensa-linux-nat.c:272
msgid "Couldn't get extended registers"
msgstr ""

#: xtensa-linux-nat.c:279
msgid "Couldn't write extended registers"
msgstr ""

#: xtensa-tdep.c:253
#, possible-c-format
msgid "invalid register %d"
msgstr ""

#: xtensa-tdep.c:417 xtensa-tdep.c:496
msgid "size of all masks is larger than the register"
msgstr ""

#: xtensa-tdep.c:593
#, possible-c-format
msgid "cannot read register %s"
msgstr ""

#: xtensa-tdep.c:605 xtensa-tdep.c:612
msgid "cannot read register"
msgstr ""

#: xtensa-tdep.c:677
#, possible-c-format
msgid "cannot write register %s"
msgstr ""

#: xtensa-tdep.c:689 xtensa-tdep.c:697
msgid "cannot write register"
msgstr ""

#: xtensa-tdep.c:1396
msgid ""
"\n"
"Unrecognised function prologue. Stack trace cannot be resolved. This message "
"will not be repeated in this session.\n"
msgstr ""

#: xtensa-tdep.c:1563
#, possible-c-format
msgid "cannot extract return value of %d bytes long"
msgstr ""

#: xtensa-tdep.c:1618
#, possible-c-format
msgid "unimplemented for this length: %s"
msgstr ""

#: xtensa-tdep.c:2419
msgid "Unable to read target memory ..."
msgstr ""

#: xtensa-tdep.c:2915
msgid "Unable to decode Xtensa Window Interrupt Handler's code."
msgstr ""

#: xtensa-tdep.c:2946
msgid "Unable to read Xtensa register EPC1"
msgstr ""

#: xtensa-tdep.c:3042
#, c-format
msgid ""
"\n"
"\tnum_aregs: Number of AR registers (%d) is not a power of two!"
msgstr ""

#: xtensa-tdep.c:3049
#, c-format
msgid ""
"\n"
"\tpc_regnum: No PC register"
msgstr ""

#: xtensa-tdep.c:3051
#, c-format
msgid ""
"\n"
"\tps_regnum: No PS register"
msgstr ""

#: xtensa-tdep.c:3056
#, c-format
msgid ""
"\n"
"\twb_regnum: No WB register"
msgstr ""

#: xtensa-tdep.c:3058
#, c-format
msgid ""
"\n"
"\tws_regnum: No WS register"
msgstr ""

#: xtensa-tdep.c:3060
#, c-format
msgid ""
"\n"
"\tar_base: No AR registers"
msgstr ""

#: xtensa-tdep.c:3064
#, c-format
msgid ""
"\n"
"\ta0_base: No Ax registers"
msgstr ""

#: xtensa-tdep.c:3068
#, possible-c-format
msgid "the following are invalid: %s"
msgstr ""

#: xtensa-tdep.c:3253
msgid "xtensa_dump_tdep(): not implemented"
msgstr ""

#: xtensa-tdep.c:3265
msgid "Set Xtensa debugging."
msgstr ""

#: xtensa-tdep.c:3266
msgid "Show Xtensa debugging."
msgstr ""

#: xtensa-tdep.c:3266
msgid ""
"When non-zero, Xtensa-specific debugging is enabled. Can be 1, 2, 3, or 4 "
"indicating the level of debugging."
msgstr ""