| [^:]*: Assembler messages: |
| [^:]*:36: Error: lo register required -- `tst r8,r0' |
| [^:]*:36: Error: lo register required -- `tst r0,r8' |
| [^:]*:36: Error: unshifted register required -- `tst r0,#12' |
| [^:]*:36: Error: unshifted register required -- `tst r0,r1,lsl#2' |
| [^:]*:36: Error: unshifted register required -- `tst r0,r1,lsl r3' |
| [^:]*:37: Error: lo register required -- `cmn r8,r0' |
| [^:]*:37: Error: lo register required -- `cmn r0,r8' |
| [^:]*:37: Error: unshifted register required -- `cmn r0,#12' |
| [^:]*:37: Error: unshifted register required -- `cmn r0,r1,lsl#2' |
| [^:]*:37: Error: unshifted register required -- `cmn r0,r1,lsl r3' |
| [^:]*:38: Error: lo register required -- `mvn r8,r0' |
| [^:]*:38: Error: lo register required -- `mvn r0,r8' |
| [^:]*:38: Error: unshifted register required -- `mvn r0,#12' |
| [^:]*:38: Error: unshifted register required -- `mvn r0,r1,lsl#2' |
| [^:]*:38: Error: unshifted register required -- `mvn r0,r1,lsl r3' |
| [^:]*:39: Error: lo register required -- `neg r8,r0' |
| [^:]*:39: Error: lo register required -- `neg r0,r8' |
| [^:]*:40: Error: lo register required -- `rev r8,r0' |
| [^:]*:40: Error: lo register required -- `rev r0,r8' |
| [^:]*:41: Error: lo register required -- `rev16 r8,r0' |
| [^:]*:41: Error: lo register required -- `rev16 r0,r8' |
| [^:]*:42: Error: lo register required -- `revsh r8,r0' |
| [^:]*:42: Error: lo register required -- `revsh r0,r8' |
| [^:]*:43: Error: lo register required -- `sxtb r8,r0' |
| [^:]*:43: Error: lo register required -- `sxtb r0,r8' |
| [^:]*:43: Error: Thumb encoding does not support rotation -- `sxtb r0,r1,ror#8' |
| [^:]*:44: Error: lo register required -- `sxth r8,r0' |
| [^:]*:44: Error: lo register required -- `sxth r0,r8' |
| [^:]*:44: Error: Thumb encoding does not support rotation -- `sxth r0,r1,ror#8' |
| [^:]*:45: Error: lo register required -- `uxtb r8,r0' |
| [^:]*:45: Error: lo register required -- `uxtb r0,r8' |
| [^:]*:45: Error: Thumb encoding does not support rotation -- `uxtb r0,r1,ror#8' |
| [^:]*:46: Error: lo register required -- `uxth r8,r0' |
| [^:]*:46: Error: lo register required -- `uxth r0,r8' |
| [^:]*:46: Error: Thumb encoding does not support rotation -- `uxth r0,r1,ror#8' |
| [^:]*:48: Error: dest must overlap one source register -- `adc r1,r2,r3' |
| [^:]*:48: Error: lo register required -- `adc r8,r0' |
| [^:]*:48: Error: lo register required -- `adc r0,r8' |
| [^:]*:48: Error: unshifted register required -- `adc r0,#12' |
| [^:]*:48: Error: unshifted register required -- `adc r0,r1,lsl#2' |
| [^:]*:48: Error: unshifted register required -- `adc r0,r1,lsl r3' |
| [^:]*:49: Error: dest must overlap one source register -- `and r1,r2,r3' |
| [^:]*:49: Error: lo register required -- `and r8,r0' |
| [^:]*:49: Error: lo register required -- `and r0,r8' |
| [^:]*:49: Error: unshifted register required -- `and r0,#12' |
| [^:]*:49: Error: unshifted register required -- `and r0,r1,lsl#2' |
| [^:]*:49: Error: unshifted register required -- `and r0,r1,lsl r3' |
| [^:]*:50: Error: dest and source1 must be the same register -- `bic r1,r2,r3' |
| [^:]*:50: Error: lo register required -- `bic r8,r0' |
| [^:]*:50: Error: lo register required -- `bic r0,r8' |
| [^:]*:50: Error: unshifted register required -- `bic r0,#12' |
| [^:]*:50: Error: unshifted register required -- `bic r0,r1,lsl#2' |
| [^:]*:50: Error: unshifted register required -- `bic r0,r1,lsl r3' |
| [^:]*:51: Error: dest must overlap one source register -- `eor r1,r2,r3' |
| [^:]*:51: Error: lo register required -- `eor r8,r0' |
| [^:]*:51: Error: lo register required -- `eor r0,r8' |
| [^:]*:51: Error: unshifted register required -- `eor r0,#12' |
| [^:]*:51: Error: unshifted register required -- `eor r0,r1,lsl#2' |
| [^:]*:51: Error: unshifted register required -- `eor r0,r1,lsl r3' |
| [^:]*:52: Error: dest must overlap one source register -- `orr r1,r2,r3' |
| [^:]*:52: Error: lo register required -- `orr r8,r0' |
| [^:]*:52: Error: lo register required -- `orr r0,r8' |
| [^:]*:52: Error: unshifted register required -- `orr r0,#12' |
| [^:]*:52: Error: unshifted register required -- `orr r0,r1,lsl#2' |
| [^:]*:52: Error: unshifted register required -- `orr r0,r1,lsl r3' |
| [^:]*:53: Error: dest and source1 must be the same register -- `sbc r1,r2,r3' |
| [^:]*:53: Error: lo register required -- `sbc r8,r0' |
| [^:]*:53: Error: lo register required -- `sbc r0,r8' |
| [^:]*:53: Error: unshifted register required -- `sbc r0,#12' |
| [^:]*:53: Error: unshifted register required -- `sbc r0,r1,lsl#2' |
| [^:]*:53: Error: unshifted register required -- `sbc r0,r1,lsl r3' |
| [^:]*:54: Error: dest must overlap one source register -- `mul r1,r2,r3' |
| [^:]*:54: Error: lo register required -- `mul r8,r0' |
| [^:]*:54: Error: lo register required -- `mul r0,r8' |
| [^:]*:62: Error: lo register required -- `asr r8,r0,#12' |
| [^:]*:62: Error: lo register required -- `asr r0,r8,#12' |
| [^:]*:62: Error: lo register required -- `asr r8,r0' |
| [^:]*:62: Error: lo register required -- `asr r0,r8' |
| [^:]*:63: Error: lo register required -- `lsl r8,r0,#12' |
| [^:]*:63: Error: lo register required -- `lsl r0,r8,#12' |
| [^:]*:63: Error: lo register required -- `lsl r8,r0' |
| [^:]*:63: Error: lo register required -- `lsl r0,r8' |
| [^:]*:64: Error: lo register required -- `lsr r8,r0,#12' |
| [^:]*:64: Error: lo register required -- `lsr r0,r8,#12' |
| [^:]*:64: Error: lo register required -- `lsr r8,r0' |
| [^:]*:64: Error: lo register required -- `lsr r0,r8' |
| [^:]*:65: Error: lo register required -- `ror r8,r0,#12' |
| [^:]*:65: Error: lo register required -- `ror r0,r8,#12' |
| [^:]*:65: Error: lo register required -- `ror r8,r0' |
| [^:]*:65: Error: lo register required -- `ror r0,r8' |
| [^:]*:66: Error: ror #imm not supported -- `ror r0,r1,#12' |
| [^:]*:69: Error: unshifted register required -- `add r0,r1,lsl#2' |
| [^:]*:70: Error: unshifted register required -- `add r0,r1,lsl r3' |
| [^:]*:71: Error: lo register required -- `add r8,r0,#1' |
| [^:]*:72: Error: lo register required -- `add r0,r8,#1' |
| [^:]*:73: Error: lo register required -- `add r8,#10' |
| [^:]*:74: Error: dest must overlap one source register -- `add r8,r1,r2' |
| [^:]*:75: Error: dest must overlap one source register -- `add r1,r8,r2' |
| [^:]*:76: Error: dest must overlap one source register -- `add r1,r2,r8' |
| [^:]*:77: Error: lo register required -- `add r8,pc,#4' |
| [^:]*:78: Error: lo register required -- `add r8,sp,#4' |
| [^:]*:80: Error: lo register required -- `sub r8,r0' |
| [^:]*:80: Error: lo register required -- `sub r0,r8' |
| [^:]*:80: Error: unshifted register required -- `sub r0,r1,lsl#2' |
| [^:]*:80: Error: unshifted register required -- `sub r0,r1,lsl r3' |
| [^:]*:81: Error: lo register required -- `sub r8,r0,#1' |
| [^:]*:82: Error: lo register required -- `sub r0,r8,#1' |
| [^:]*:83: Error: lo register required -- `sub r8,#10' |
| [^:]*:84: Error: lo register required -- `sub r8,r1,r2' |
| [^:]*:85: Error: lo register required -- `sub r1,r8,r2' |
| [^:]*:86: Error: lo register required -- `sub r1,r2,r8' |
| [^:]*:90: Error: only lo regs allowed with immediate -- `cmp r8,#255' |
| [^:]*:94: Error: only lo regs allowed with immediate -- `mov r8,#255' |
| [^:]*:106: Error: lo register required -- `ldr r8,\[r0\]' |
| [^:]*:106: Error: lo register required -- `ldr r0,\[r8\]' |
| [^:]*:106: Error: lo register required -- `ldr r0,\[r0,r8\]' |
| [^:]*:106: Error: Thumb does not support this addressing mode -- `ldr r0,\[r1,#4\]!' |
| [^:]*:106: Error: Thumb does not support this addressing mode -- `ldr r0,\[r1\],#4' |
| [^:]*:106: Error: Thumb does not support this addressing mode -- `ldr r0,\[r1,-r2\]' |
| [^:]*:106: Error: Thumb does not support this addressing mode -- `ldr r0,\[r1\],r2' |
| [^:]*:107: Error: lo register required -- `ldrb r8,\[r0\]' |
| [^:]*:107: Error: lo register required -- `ldrb r0,\[r8\]' |
| [^:]*:107: Error: lo register required -- `ldrb r0,\[r0,r8\]' |
| [^:]*:107: Error: Thumb does not support this addressing mode -- `ldrb r0,\[r1,#4\]!' |
| [^:]*:107: Error: Thumb does not support this addressing mode -- `ldrb r0,\[r1\],#4' |
| [^:]*:107: Error: Thumb does not support this addressing mode -- `ldrb r0,\[r1,-r2\]' |
| [^:]*:107: Error: Thumb does not support this addressing mode -- `ldrb r0,\[r1\],r2' |
| [^:]*:108: Error: lo register required -- `ldrh r8,\[r0\]' |
| [^:]*:108: Error: lo register required -- `ldrh r0,\[r8\]' |
| [^:]*:108: Error: lo register required -- `ldrh r0,\[r0,r8\]' |
| [^:]*:108: Error: Thumb does not support this addressing mode -- `ldrh r0,\[r1,#4\]!' |
| [^:]*:108: Error: Thumb does not support this addressing mode -- `ldrh r0,\[r1\],#4' |
| [^:]*:108: Error: Thumb does not support this addressing mode -- `ldrh r0,\[r1,-r2\]' |
| [^:]*:108: Error: Thumb does not support this addressing mode -- `ldrh r0,\[r1\],r2' |
| [^:]*:109: Error: lo register required -- `ldrsb r8,\[r0\]' |
| [^:]*:109: Error: lo register required -- `ldrsb r0,\[r8\]' |
| [^:]*:109: Error: lo register required -- `ldrsb r0,\[r0,r8\]' |
| [^:]*:109: Error: Thumb does not support this addressing mode -- `ldrsb r0,\[r1,#4\]!' |
| [^:]*:109: Error: Thumb does not support this addressing mode -- `ldrsb r0,\[r1\],#4' |
| [^:]*:109: Error: Thumb does not support this addressing mode -- `ldrsb r0,\[r1,-r2\]' |
| [^:]*:109: Error: Thumb does not support this addressing mode -- `ldrsb r0,\[r1\],r2' |
| [^:]*:110: Error: lo register required -- `ldrsh r8,\[r0\]' |
| [^:]*:110: Error: lo register required -- `ldrsh r0,\[r8\]' |
| [^:]*:110: Error: lo register required -- `ldrsh r0,\[r0,r8\]' |
| [^:]*:110: Error: Thumb does not support this addressing mode -- `ldrsh r0,\[r1,#4\]!' |
| [^:]*:110: Error: Thumb does not support this addressing mode -- `ldrsh r0,\[r1\],#4' |
| [^:]*:110: Error: Thumb does not support this addressing mode -- `ldrsh r0,\[r1,-r2\]' |
| [^:]*:110: Error: Thumb does not support this addressing mode -- `ldrsh r0,\[r1\],r2' |
| [^:]*:111: Error: lo register required -- `str r8,\[r0\]' |
| [^:]*:111: Error: lo register required -- `str r0,\[r8\]' |
| [^:]*:111: Error: lo register required -- `str r0,\[r0,r8\]' |
| [^:]*:111: Error: Thumb does not support this addressing mode -- `str r0,\[r1,#4\]!' |
| [^:]*:111: Error: Thumb does not support this addressing mode -- `str r0,\[r1\],#4' |
| [^:]*:111: Error: Thumb does not support this addressing mode -- `str r0,\[r1,-r2\]' |
| [^:]*:111: Error: Thumb does not support this addressing mode -- `str r0,\[r1\],r2' |
| [^:]*:112: Error: lo register required -- `strb r8,\[r0\]' |
| [^:]*:112: Error: lo register required -- `strb r0,\[r8\]' |
| [^:]*:112: Error: lo register required -- `strb r0,\[r0,r8\]' |
| [^:]*:112: Error: Thumb does not support this addressing mode -- `strb r0,\[r1,#4\]!' |
| [^:]*:112: Error: Thumb does not support this addressing mode -- `strb r0,\[r1\],#4' |
| [^:]*:112: Error: Thumb does not support this addressing mode -- `strb r0,\[r1,-r2\]' |
| [^:]*:112: Error: Thumb does not support this addressing mode -- `strb r0,\[r1\],r2' |
| [^:]*:113: Error: lo register required -- `strh r8,\[r0\]' |
| [^:]*:113: Error: lo register required -- `strh r0,\[r8\]' |
| [^:]*:113: Error: lo register required -- `strh r0,\[r0,r8\]' |
| [^:]*:113: Error: Thumb does not support this addressing mode -- `strh r0,\[r1,#4\]!' |
| [^:]*:113: Error: Thumb does not support this addressing mode -- `strh r0,\[r1\],#4' |
| [^:]*:113: Error: Thumb does not support this addressing mode -- `strh r0,\[r1,-r2\]' |
| [^:]*:113: Error: Thumb does not support this addressing mode -- `strh r0,\[r1\],r2' |
| [^:]*:115: Error: Thumb does not support this addressing mode -- `ldr r0,\[r1,r2,lsl#1\]' |
| [^:]*:116: Error: Thumb does not support this addressing mode -- `str r0,\[r1,r2,lsl#1\]' |
| [^:]*:119: Error: lo register required -- `ldmia r8!,{r1,r2}' |
| [^:]*:120: Error: lo register required -- `ldmia r7!,{r8}' |
| [^:]*:121: Warning: this instruction will write back the base register |
| [^:]*:122: Warning: this instruction will not write back the base register |
| [^:]*:124: Error: lo register required -- `stmia r8!,{r1,r2}' |
| [^:]*:125: Error: lo register required -- `stmia r7!,{r8}' |
| [^:]*:126: Warning: this instruction will write back the base register |
| [^:]*:127: Warning: value stored for r7 is UNPREDICTABLE |
| [^:]*:129: Error: invalid register list to push/pop instruction -- `push {r8,r9}' |
| [^:]*:130: Error: invalid register list to push/pop instruction -- `pop {r8,r9}' |
| [^:]*:133: Error: immediate value out of range -- `bkpt #257' |
| [^:]*:134: Error: Thumb does not support the 2-argument form of this instruction -- `cpsie ai,#5' |
| [^:]*:135: Error: Thumb does not support the 2-argument form of this instruction -- `cpsid ai,#5' |
| [^:]*:138: Error: Thumb does not support conditional execution |
