| ## Process this file with automake to generate Makefile.in |
| |
| AUTOMAKE_OPTIONS = cygnus |
| |
| # What version of the manual you want; "all" includes everything |
| CONFIG=all |
| |
| # Options to extract the man page from as.texinfo |
| MANCONF = -Dman |
| |
| TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS) |
| |
| POD2MAN = pod2man --center="GNU Development Tools" \ |
| --release="binutils-$(VERSION)" --section=1 |
| |
| # List of man pages generated from binutils.texi |
| man_MANS = \ |
| addr2line.1 \ |
| ar.1 \ |
| dlltool.1 \ |
| nlmconv.1 \ |
| nm.1 \ |
| objcopy.1 \ |
| objdump.1 \ |
| ranlib.1 \ |
| readelf.1 \ |
| size.1 \ |
| strings.1 \ |
| strip.1 \ |
| windres.1 \ |
| $(DEMANGLER_NAME).1 |
| |
| info_TEXINFOS = binutils.texi |
| binutils_TEXINFOS = config.texi |
| binutils_TEXI = $(srcdir)/binutils.texi |
| |
| AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" |
| TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" |
| |
| config.texi: $(srcdir)/../../bfd/configure $(binutils_TEXI) |
| rm -f config.texi |
| eval `grep '^ *VERSION=' $(srcdir)/../../bfd/configure`; \ |
| echo "@set VERSION $$VERSION" > $@ |
| echo "@set UPDATED `date "+%B %Y"`" >> config.texi |
| |
| # Man page generation from texinfo |
| addr2line.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod |
| -($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f addr2line.pod |
| |
| ar.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod |
| -($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f ar.pod |
| |
| dlltool.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod |
| -($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f dlltool.pod |
| |
| nlmconv.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dnlmconv < $(binutils_TEXI) > nlmconv.pod |
| -($(POD2MAN) nlmconv.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f nlmconv.pod |
| |
| nm.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod |
| -($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f nm.pod |
| |
| objcopy.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod |
| -($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f objcopy.pod |
| |
| objdump.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod |
| -($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f objdump.pod |
| |
| ranlib.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod |
| -($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f ranlib.pod |
| |
| readelf.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod |
| -($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f readelf.pod |
| |
| size.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod |
| -($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f size.pod |
| |
| strings.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod |
| -($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f strings.pod |
| |
| strip.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod |
| -($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f strip.pod |
| |
| windres.1: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod |
| -($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f windres.pod |
| |
| cxxfilt.man: $(binutils_TEXI) $(binutils_TEXINFOS) |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod |
| -($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1) |
| rm -f $(DEMANGLER_NAME).pod |
| |
| MAINTAINERCLEANFILES = config.texi |
| MOSTLYCLEANFILES = $(DEMANGLER_NAME).1 |
| |
| $(DEMANGLER_NAME).1: cxxfilt.man Makefile |
| if test -f cxxfilt.man; then \ |
| man=cxxfilt.man; \ |
| else \ |
| man=$(srcdir)/cxxfilt.man; \ |
| fi; \ |
| sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \ |
| -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \ |
| > $(DEMANGLER_NAME).1 |
| |
| # We want install to imply install-info as per GNU standards, despite the |
| # cygnus option. |
| install-data-local: install-info |
| |
| html__strip_dir = `echo $$p | sed -e 's|^.*/||'`; |
| |
| install-html: install-html-am |
| |
| install-html-am: $(HTMLS) |
| @$(NORMAL_INSTALL) |
| test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)" |
| @list='$(HTMLS)'; for p in $$list; do \ |
| if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \ |
| f=$(html__strip_dir) \ |
| if test -d "$$d$$p"; then \ |
| echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ |
| echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \ |
| else \ |
| echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \ |
| fi; \ |
| done |
| |
| # Maintenance |
| |
| # We need it for the taz target in ../../Makefile.in. |
| info-local: $(MANS) |