| /* |
| * SdioAdapter.h |
| * |
| * Copyright(c) 1998 - 2009 Texas Instruments. All rights reserved. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Texas Instruments nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /** \file SdioAdapter.h |
| * \brief SDIO adapter module API definition |
| * |
| * \see SdioAdapter.c |
| */ |
| |
| #ifndef __SDIO_ADAPT_API_H__ |
| #define __SDIO_ADAPT_API_H__ |
| |
| |
| #include "TxnDefs.h" |
| |
| |
| /************************************************************************ |
| * Defines |
| ************************************************************************/ |
| |
| /************************************************************************ |
| * Types |
| ************************************************************************/ |
| |
| /************************************************************************ |
| * Functions |
| ************************************************************************/ |
| /** \brief sdioAdapt_ConnectBus: Init SDIO driver and HW |
| * |
| * \param fCbFunc - The bus driver's callback upon async transaction completion |
| * \param hCbArg - The CB function handle |
| * \param uBlkSizeShift - In block-mode: BlkSize = (1 << uBlkSizeShift) |
| * \param uSdioThreadPriority - The SDIO interrupt handler thread priority |
| * \return 0 = OK, otherwise = error |
| * |
| * \par Description |
| * Called by BusDrv to initialize the SDIO driver and HW. |
| * |
| * \sa |
| */ |
| int sdioAdapt_ConnectBus (void * fCbFunc, |
| void * hCbArg, |
| unsigned int uBlkSizeShift, |
| unsigned int uSdioThreadPriority, |
| unsigned char **pTxDmaSrcAddr); |
| |
| /** \brief sdioAdapt_DisconnectBus: Disconnect SDIO driver |
| * |
| * \param void |
| * \return 0 = OK, otherwise = error |
| * |
| * \par Description |
| * Called by BusDrv. Disconnect the SDIO driver. |
| * |
| * \sa |
| */ |
| int sdioAdapt_DisconnectBus (void); |
| /** \brief sdioAdapt_Transact: Process transaction |
| * |
| * \param uFuncId - SDIO function ID (1- BT, 2 - WLAN) |
| * \param uHwAddr - HW address where to write the data |
| * \param pHostAddr - The data buffer to write from or read into |
| * \param uLength - The data length in bytes |
| * \param bDirection - TRUE = Read, FALSE = Write |
| * \param bBlkMode - If TRUE - use block mode |
| * \param bMore - If TRUE, more transactions are expected so don't turn off any HW |
| * \return COMPLETE if Txn completed in this context, PENDING if not, ERROR if failed |
| * |
| * \par Description |
| * Called by the BusDrv module to issue an SDIO transaction. |
| * Call write or read SDIO-driver function according to the direction. |
| * Use Sync or Async method according to the transaction length |
| * |
| * \note It's assumed that this function is called only when idle (i.e. previous Txn is done). |
| * |
| * \sa |
| */ |
| ETxnStatus sdioAdapt_Transact (unsigned int uFuncId, |
| unsigned int uHwAddr, |
| void * pHostAddr, |
| unsigned int uLength, |
| unsigned int bDirection, |
| unsigned int bBlkMode, |
| unsigned int bFixedAddr, |
| unsigned int bMore); |
| /** \brief sdioAdapt_TransactBytes: Process bytes transaction |
| * |
| * \param uFuncId - SDIO function ID (1- BT, 2 - WLAN) |
| * \param uHwAddr - HW address where to write the data |
| * \param pHostAddr - The data buffer to write from or read into |
| * \param uLength - The data length in bytes |
| * \param bDirection - TRUE = Read, FALSE = Write |
| * \param bMore - If TRUE, more transactions are expected so don't turn off any HW |
| * \return COMPLETE if Txn succeeded, ERROR if failed |
| * |
| * \par Description |
| * Called by the BusDrv module to issue a bytes stream SDIO transaction. |
| * Call write or read SDIO-driver Sync function according to the direction. |
| * |
| * \note It's assumed that this function is called only when idle (i.e. previous Txn is done). |
| * |
| * \sa |
| */ |
| ETxnStatus sdioAdapt_TransactBytes (unsigned int uFuncId, |
| unsigned int uHwAddr, |
| void * pHostAddr, |
| unsigned int uLength, |
| unsigned int bDirection, |
| unsigned int bMore); |
| |
| |
| |
| #endif /*__SDIO_ADAPT_API_H__*/ |