| /* |
| * sme.c |
| * |
| * Copyright(c) 1998 - 2009 Texas Instruments. All rights reserved. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Texas Instruments nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /** \file sme.c |
| * \brief SME implementation |
| * |
| * \see sme.h, smeSm.c smePrivate.h |
| */ |
| |
| |
| #define __FILE_ID__ FILE_ID_41 |
| #include <linux/kernel.h> |
| #include "smePrivate.h" |
| #include "GenSM.h" |
| #include "scanResultTable.h" |
| #include "smeSm.h" |
| #include "siteMgrApi.h" |
| #include "regulatoryDomainApi.h" |
| #include "connApi.h" |
| |
| |
| /** |
| * \fn sme_Create |
| * \brief Creates the SME module. Allocates system resources |
| * |
| * Creates the SME module. Allocates system resources |
| * |
| * \param hOS - handle to the OS adaptation layer |
| * \return Handle to the SME object |
| * \sa sme_Init, sme_SetDefaults, sme_Destroy |
| */ |
| TI_HANDLE sme_Create (TI_HANDLE hOS) |
| { |
| TSme *pSme; |
| |
| /* allocate space for the SME object */ |
| pSme = (TSme*)os_memoryAlloc (hOS, sizeof (TSme)); |
| if (NULL == pSme) |
| { |
| WLAN_OS_REPORT (("sme_Create: unable to allocate memor yfor SME object. SME craetion failed\n")); |
| return NULL; |
| } |
| |
| /* nullify SME object */ |
| os_memoryZero (hOS, (void*)pSme, sizeof (TSme)); |
| |
| /* store OS handle */ |
| pSme->hOS = hOS; |
| |
| /* Create SME generic state-machine */ |
| pSme->hSmeSm = genSM_Create (hOS); |
| if (NULL == pSme->hSmeSm) |
| { |
| WLAN_OS_REPORT (("sme_Create: unable to create SME generic SM. SME creation failed\n")); |
| sme_Destroy ((TI_HANDLE)pSme); |
| return NULL; |
| } |
| |
| /* Create SME scan result table */ |
| pSme->hScanResultTable = scanResultTable_Create (hOS); |
| if (NULL == pSme->hScanResultTable) |
| { |
| WLAN_OS_REPORT (("sme_Create: unable to create scan result table. SME creation failed\n")); |
| sme_Destroy ((TI_HANDLE)pSme); |
| return NULL; |
| } |
| |
| return (TI_HANDLE)pSme; |
| } |
| |
| /** |
| * \fn sme_Init |
| * \brief Initializes the SME object. Store module handles |
| * |
| * Initializes the SME object. Store module handles |
| * |
| * \param pStadHandles - pointer to the handles structure |
| * \return None |
| * \sa sme_Create, sme_SetDefaults |
| */ |
| void sme_Init (TStadHandlesList *pStadHandles) |
| { |
| TSme *pSme = pStadHandles->hSme; |
| |
| /* Store object handles */ |
| pSme->hReport = pStadHandles->hReport; |
| pSme->hScanCncn = pStadHandles->hScanCncn; |
| pSme->hApConn = pStadHandles->hAPConnection; |
| pSme->hConn = pStadHandles->hConn; |
| pSme->hScr = pStadHandles->hSCR; |
| pSme->hRegDomain = pStadHandles->hRegulatoryDomain; |
| pSme->hEvHandler = pStadHandles->hEvHandler; |
| pSme->hSiteMgr = pStadHandles->hSiteMgr; |
| pSme->hRsn = pStadHandles->hRsn; |
| pSme->hDrvMain = pStadHandles->hDrvMain; |
| pSme->hTwd = pStadHandles->hTWD; |
| |
| |
| /* Initialize the scan result table object */ |
| scanResultTable_Init (pSme->hScanResultTable, pStadHandles); |
| |
| /* Initialize the SME state-machine object */ |
| genSM_Init (pSme->hSmeSm, pStadHandles->hReport); |
| } |
| |
| /** |
| * \fn sme_SetDefaults |
| * \brief Set default values to the SME (and the SM and scan result table) |
| * |
| * Set default values to the SME (and the SM and scan result table) |
| * |
| * \param hSme - handle to the SME object |
| * \param pInitParams - values read from registry / ini file |
| * \return None |
| * \sa sme_Create, sme_Init |
| */ |
| void sme_SetDefaults (TI_HANDLE hSme, TSmeModifiedInitParams *pModifiedInitParams, TSmeInitParams *pInitParams) |
| { |
| TSme *pSme = (TSme*)hSme; |
| |
| /* copy init params */ |
| os_memoryCopy (pSme->hOS, &(pSme->tInitParams), pInitParams, sizeof (TSmeInitParams)); |
| |
| /* initialize SME varaibles */ |
| pSme->bRadioOn = pModifiedInitParams->bRadioOn; |
| pSme->eConnectMode = pModifiedInitParams->eConnectMode; |
| pSme->eBssType = pModifiedInitParams->eDesiredBssType; |
| MAC_COPY (pSme->tBssid, pModifiedInitParams->tDesiredBssid); |
| |
| pSme->tSsid.len = pModifiedInitParams->tDesiredSsid.len; |
| os_memoryCopy (pSme->hOS, &(pSme->tSsid.str[ 0 ]), &(pModifiedInitParams->tDesiredSsid.str[ 0 ]), pModifiedInitParams->tDesiredSsid.len); |
| if (OS_802_11_SSID_JUNK (pSme->tSsid.str, pSme->tSsid.len)) |
| { |
| pSme->eSsidType = SSID_TYPE_INVALID; |
| pSme->bConnectRequired = TI_FALSE; |
| } |
| else if (0 == pSme->tSsid.len) |
| { |
| pSme->eSsidType = SSID_TYPE_ANY; |
| pSme->bConnectRequired = TI_TRUE; |
| } |
| else |
| { |
| pSme->eSsidType = SSID_TYPE_SPECIFIC; |
| pSme->bConnectRequired = TI_TRUE; |
| } |
| |
| pSme->eLastConnectMode = CONNECT_MODE_AUTO; |
| pSme->bAuthSent = TI_FALSE; |
| pSme->bReselect = TI_FALSE; |
| pSme->uScanCount = 0; |
| pSme->bRunning = TI_FALSE; |
| |
| /* Initialize the SME state-machine */ |
| genSM_SetDefaults (pSme->hSmeSm, SME_SM_NUMBER_OF_STATES, SME_SM_NUMBER_OF_EVENTS, (TGenSM_matrix)tSmMatrix, |
| SME_SM_STATE_IDLE, "SME SM", uStateDescription, uEventDescription, __FILE_ID__); |
| |
| /* register scan conecntrator CB */ |
| scanCncn_RegisterScanResultCB (pSme->hScanCncn, SCAN_SCC_DRIVER, sme_ScanResultCB, hSme); |
| } |
| |
| /** |
| * \fn sme_Destroy |
| * \brief Destroys the SME object. De-allocates system resources |
| * |
| * Destroys the SME object. De-allocates system resources |
| * |
| * \param hSme - handle to the SME object |
| * \return None |
| * \sa sme_Create |
| */ |
| void sme_Destroy (TI_HANDLE hSme) |
| { |
| TSme *pSme = (TSme*)hSme; |
| |
| /* destroy the scan result table */ |
| if (NULL != pSme->hScanResultTable) |
| { |
| scanResultTable_Destroy (pSme->hScanResultTable); |
| } |
| |
| /* destroy the SME generic state machine */ |
| if (NULL != pSme->hSmeSm) |
| { |
| genSM_Unload (pSme->hSmeSm); |
| } |
| |
| /* free the SME object */ |
| os_memoryFree (pSme->hOS, hSme, sizeof (TSme)); |
| } |
| |
| /** |
| * \fn sme_Start |
| * \brief Starts SME operation |
| * |
| * Starts SME operation. Send probe request templates and send a start event to the SM. |
| * Only the DrvMain module could & is call that function !!! |
| * |
| * \param hSme - handle to the SME object |
| * \return None |
| * \sa sme_Stop |
| */ |
| void sme_Start (TI_HANDLE hSme) |
| { |
| TSme *pSme = (TSme*)hSme; |
| |
| TRACE1(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_Start: called, bRadioOn = %d\n", pSme->bRadioOn); |
| |
| pSme->bRunning = TI_TRUE; |
| |
| /* |
| * call setDefaultProbeReqTemplate at sme_Start() due to the fact in order to set prob req template |
| * all moudules need to be set already |
| */ |
| setDefaultProbeReqTemplate (pSme->hSiteMgr); |
| |
| /* if radio is on, start the SM */ |
| if (TI_TRUE == pSme->bRadioOn) |
| { |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_START, hSme); |
| } |
| } |
| |
| /** |
| * \fn sme_Stop |
| * \brief Stops the driver (shuts-down the radio) |
| * |
| * Stops the driver (shuts-down the radio) |
| * |
| * \param hSme - handle to the SME object |
| * \param pCBFunc - callback function to be called when stop operation is doen |
| * \param hCBHanlde - handle to supply to the callback function |
| * \return None |
| * \sa sme_Start |
| */ |
| void sme_Stop (TI_HANDLE hSme) |
| { |
| TSme *pSme = (TSme*)hSme; |
| |
| TRACE0(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_Stop called\n"); |
| |
| pSme->bRunning = TI_FALSE; |
| |
| /* mark that running flag is send a stop event to the SM */ |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_STOP, hSme); |
| } |
| |
| /** |
| * \fn sme_Restart |
| * \brief Called due to a paramter value change in site mgr. Triggers a disconnect. |
| * |
| * Called due to a paramter value change in site mgr. Triggers a disconnect. |
| * |
| * \param hSme - handle to the SME object |
| * \param eReason - the reason for restarting the SME |
| * \return None |
| */ |
| void sme_Restart (TI_HANDLE hSme) |
| { |
| TSme *pSme = (TSme*)hSme; |
| |
| TRACE0(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_Restart called.\n"); |
| |
| pSme->uScanCount = 0; |
| |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme); |
| } |
| |
| /** |
| * \fn sme_SetParam |
| * \brief Set parameters values |
| * |
| * Set parameters values |
| * |
| * \note Note is indicated here |
| * \param hSme - handle to the SME object |
| * \param pParam - pointer to the param to set |
| * \return PARAM_NOT_SUPPORTED for an unrecognized parameter, TI_OK if successfull. |
| * \sa sme_GetParam |
| */ |
| TI_STATUS sme_SetParam (TI_HANDLE hSme, paramInfo_t *pParam) |
| { |
| TSme *pSme = (TSme*)hSme; |
| |
| TRACE1(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_SetParam: param type is 0x%x\n", pParam->paramType); |
| |
| switch (pParam->paramType) |
| { |
| case SME_RADIO_ON_PARAM: |
| /* if new value is different than current one */ |
| if (pSme->bRadioOn != pParam->content.smeRadioOn) |
| { |
| /* set new radio on value and send an event to the state-machine accordingly */ |
| pSme->bRadioOn = pParam->content.smeRadioOn; |
| if (TI_TRUE == pSme->bRadioOn) |
| { |
| if(TI_TRUE == pSme->bRunning) |
| { |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_START, hSme); |
| } |
| } |
| else |
| { |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_STOP, hSme); |
| } |
| } |
| break; |
| |
| case SME_DESIRED_SSID_PARAM: |
| /* if new value is different than current one */ |
| if ((pSme->tSsid.len != pParam->content.smeDesiredSSID.len) || |
| (0 != os_memoryCompare (pSme->hOS, &(pSme->tSsid.str[ 0 ]), |
| &(pParam->content.smeDesiredSSID.str[ 0 ]), pSme->tSsid.len))) |
| { |
| /* set new desired SSID */ |
| os_memoryCopy (pSme->hOS, &(pSme->tSsid.str[ 0 ]), &(pParam->content.smeDesiredSSID.str[ 0 ]), pParam->content.smeDesiredSSID.len); |
| pSme->tSsid.len = pParam->content.smeDesiredSSID.len; |
| |
| pSme->uScanCount = 0; |
| |
| /* now send a disconnect event */ |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme); |
| } |
| break; |
| |
| case SME_DESIRED_SSID_ACT_PARAM: |
| if (pParam->content.smeDesiredSSID.len > MAX_SSID_LEN) |
| { |
| printk("SSID length(%d) is out of range. Discard it.\n", pParam->content.smeDesiredSSID.len); |
| return PARAM_VALUE_NOT_VALID; /* ssid length is out of range */ |
| } |
| |
| pSme->bRadioOn = TI_TRUE; |
| |
| /* if new value is different than current one */ |
| if ((pSme->tSsid.len != pParam->content.smeDesiredSSID.len) || |
| (0 != os_memoryCompare (pSme->hOS, &(pSme->tSsid.str[ 0 ]), |
| &(pParam->content.smeDesiredSSID.str[ 0 ]), pSme->tSsid.len))) |
| { |
| /* set new desired SSID */ |
| os_memoryCopy (pSme->hOS, &(pSme->tSsid.str[ 0 ]), &(pParam->content.smeDesiredSSID.str[ 0 ]), pParam->content.smeDesiredSSID.len); |
| pSme->tSsid.len = pParam->content.smeDesiredSSID.len; |
| } |
| /* also set SSID type and connect required flag */ |
| if (OS_802_11_SSID_JUNK (pSme->tSsid.str, pSme->tSsid.len)) |
| { |
| pSme->eSsidType = SSID_TYPE_INVALID; |
| pSme->bConnectRequired = TI_FALSE; |
| } |
| else if (0 == pSme->tSsid.len) |
| { |
| pSme->eSsidType = SSID_TYPE_ANY; |
| pSme->bConnectRequired = TI_TRUE; |
| } |
| else |
| { |
| pSme->eSsidType = SSID_TYPE_SPECIFIC; |
| pSme->bConnectRequired = TI_TRUE; |
| } |
| pSme->uScanCount = 0; |
| |
| /* if junk SSID */ |
| if(TI_FALSE == pSme->bConnectRequired) |
| { |
| pSme->bConstantScan = TI_FALSE; |
| } |
| |
| /* printk("SME_DESIRED_SSID_ACT_PARAM: bRadioOn = %d, bRunning = %d\n", pSme->bRadioOn, pSme->bRunning); */ |
| pSme->bRunning = TI_TRUE; /* set it to TRUE in case it's accidentally altered. */ |
| |
| /* now send a disconnect event */ |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme); |
| break; |
| |
| case SME_DESIRED_BSSID_PARAM: |
| /* if new value is different than current one */ |
| if (TI_FALSE == MAC_EQUAL (pSme->tBssid, pParam->content.smeDesiredBSSID)) |
| { |
| /* set new BSSID */ |
| MAC_COPY (pSme->tBssid, pParam->content.smeDesiredBSSID); |
| pSme->uScanCount = 0; |
| /* now send a disconnect event */ |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme); |
| } |
| break; |
| |
| case SME_CONNECTION_MODE_PARAM: |
| /* if new value is different than current one */ |
| if (pSme->eConnectMode != pParam->content.smeConnectionMode) |
| { |
| /* set new connection mode */ |
| pSme->eConnectMode = pParam->content.smeConnectionMode; |
| pSme->uScanCount = 0; |
| /* now send a disconnect event */ |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme); |
| } |
| break; |
| |
| case SME_DESIRED_BSS_TYPE_PARAM: |
| /* if new value is different than current one */ |
| if (pSme->eBssType != pParam->content.smeDesiredBSSType) |
| { |
| /* set new BSS type */ |
| pSme->eBssType = pParam->content.smeDesiredBSSType; |
| pSme->uScanCount = 0; |
| /* now send a disconnect event */ |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme); |
| } |
| break; |
| |
| case SME_WSC_PB_MODE_PARAM: |
| pSme->bConstantScan = TI_TRUE; |
| pSme->uScanCount = 0; |
| /* now send a disconnect event */ |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme); |
| break; |
| |
| default: |
| TRACE1(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_SetParam: unrecognized param type %d\n", pParam->paramType); |
| return PARAM_NOT_SUPPORTED; |
| /* break;*/ |
| } |
| |
| return TI_OK; |
| } |
| |
| /** |
| * \fn sme_GetParam |
| * \brief Retrieves a parameter from the SME |
| * |
| * Retrieves a parameter from the SME |
| * |
| * \param hSme - handle to the SME object |
| * \param pParam - pointer to the param to retrieve |
| * \return PARAM_NOT_SUPPORTED for an unrecognized parameter, TI_OK if successfull. |
| * \sa sme_SetParam |
| */ |
| TI_STATUS sme_GetParam (TI_HANDLE hSme, paramInfo_t *pParam) |
| { |
| TSme *pSme = (TSme*)hSme; |
| |
| TRACE1(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_GetParam: param type is 0x%x\n", pParam->paramType); |
| |
| switch (pParam->paramType) |
| { |
| case SME_RADIO_ON_PARAM: |
| pParam->content.smeRadioOn = pSme->bRadioOn; |
| break; |
| |
| case SME_DESIRED_SSID_ACT_PARAM: |
| pParam->content.smeDesiredSSID.len = pSme->tSsid.len; |
| os_memoryCopy (pSme->hOS, &(pParam->content.smeDesiredSSID.str[ 0 ]), |
| &(pSme->tSsid.str[ 0 ]), pSme->tSsid.len); |
| break; |
| |
| case SME_DESIRED_BSSID_PARAM: |
| MAC_COPY (pParam->content.smeDesiredBSSID, pSme->tBssid); |
| break; |
| |
| case SME_CONNECTION_MODE_PARAM: |
| pParam->content.smeConnectionMode = pSme->eConnectMode; |
| break; |
| |
| case SME_DESIRED_BSS_TYPE_PARAM: |
| pParam->content.smeDesiredBSSType = pSme->eBssType; |
| break; |
| |
| case SME_CONNECTION_STATUS_PARAM: |
| switch (genSM_GetCurrentState (pSme->hSmeSm)) |
| { |
| case SME_SM_STATE_IDLE: |
| pParam->content.smeSmConnectionStatus = eDot11RadioDisabled; |
| break; |
| case SME_SM_STATE_WAIT_CONNECT: |
| pParam->content.smeSmConnectionStatus = eDot11Disassociated; |
| break; |
| case SME_SM_STATE_SCANNING: |
| pParam->content.smeSmConnectionStatus = eDot11Scaning; |
| break; |
| case SME_SM_STATE_CONNECTING: |
| pParam->content.smeSmConnectionStatus = eDot11Connecting; |
| break; |
| case SME_SM_STATE_CONNECTED: |
| pParam->content.smeSmConnectionStatus = eDot11Associated; |
| break; |
| case SME_SM_STATE_DISCONNECTING: |
| pParam->content.smeSmConnectionStatus = eDot11Disassociated; |
| break; |
| } |
| break; |
| |
| default: |
| TRACE1(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_GetParam: unrecognized param type %d\n", pParam->paramType); |
| return PARAM_NOT_SUPPORTED; |
| /* break;*/ |
| } |
| |
| return TI_OK; |
| } |
| |
| /** |
| * \fn sme_ScanResultCB |
| * \brief Callback function from scan concentrator for results and scan complete indications |
| * |
| * Callback function from scan concentrator for results and scan complete indications |
| * |
| * \param hSme - handle to the SME object |
| * \param eStatus - the reason for calling the CB |
| * \param pFrameInfo - frame information (if the CB is called due to received frame) |
| * \param uSPSStatus - SPS attened channels (if the CB is called to inidcate an SPS scan complete) |
| * \return None |
| */ |
| void sme_ScanResultCB (TI_HANDLE hSme, EScanCncnResultStatus eStatus, |
| TScanFrameInfo* pFrameInfo, TI_UINT16 uSPSStatus) |
| { |
| TSme *pSme = (TSme*)hSme; |
| paramInfo_t param; |
| |
| switch (eStatus) |
| { |
| /* a frame was received - update the scan result table */ |
| case SCAN_CRS_RECEIVED_FRAME: |
| TRACE6(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_ScanResultCB: received frame from BSSID %02x:%02x:%02x:%02x:%02x:%02x\n", (*pFrameInfo->bssId)[ 0 ], (*pFrameInfo->bssId)[ 1 ], (*pFrameInfo->bssId)[ 2 ], (*pFrameInfo->bssId)[ 3 ], (*pFrameInfo->bssId)[ 4 ], (*pFrameInfo->bssId)[ 5 ]); |
| |
| /* |
| * in auto mode in order to find country IE only !!! |
| * filter frames according to desired SSID, in case we are also trying to find |
| * country IE in passive scan, to avoid a table overflow (in manual mode, the SME table must be equal to the app |
| * table, the app is responsible to decide which SSIDs to use for scan) |
| */ |
| if (CONNECT_MODE_AUTO == pSme->eConnectMode) |
| { |
| if (SSID_TYPE_SPECIFIC == pSme->eSsidType) |
| { |
| if ((pSme->tSsid.len == pFrameInfo->parsedIEs->content.iePacket.pSsid->hdr[ 1 ]) && |
| (0 == os_memoryCompare (pSme->hOS, &(pSme->tSsid.str[ 0 ]), |
| &(pFrameInfo->parsedIEs->content.iePacket.pSsid->serviceSetId[ 0 ]), |
| pSme->tSsid.len))) |
| { |
| if (TI_OK != scanResultTable_UpdateEntry (pSme->hScanResultTable, pFrameInfo->bssId, pFrameInfo)) |
| { |
| TRACE6(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_ScanResultCB: unable to update specific entry for BSSID %02x:%02x:%02x:%02x:%02x:%02x\n", (*pFrameInfo->bssId)[ 0 ], (*pFrameInfo->bssId)[ 1 ], (*pFrameInfo->bssId)[ 2 ], (*pFrameInfo->bssId)[ 3 ], (*pFrameInfo->bssId)[ 4 ], (*pFrameInfo->bssId)[ 5 ]); |
| } |
| } |
| } |
| else |
| { |
| if (TI_OK != scanResultTable_UpdateEntry (pSme->hScanResultTable, pFrameInfo->bssId, pFrameInfo)) |
| { |
| TRACE6(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_ScanResultCB: unable to update entry for BSSID %02x:%02x:%02x:%02x:%02x:%02x because table is full\n", (*pFrameInfo->bssId)[ 0 ], (*pFrameInfo->bssId)[ 1 ], (*pFrameInfo->bssId)[ 2 ], (*pFrameInfo->bssId)[ 3 ], (*pFrameInfo->bssId)[ 4 ], (*pFrameInfo->bssId)[ 5 ]); |
| } |
| } |
| } |
| else |
| /* manual mode */ |
| { |
| if (TI_OK != scanResultTable_UpdateEntry (pSme->hScanResultTable, pFrameInfo->bssId, pFrameInfo)) |
| { |
| TRACE6(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_ScanResultCB: unable to update application scan entry for BSSID %02x:%02x:%02x:%02x:%02x:%02x\n", (*pFrameInfo->bssId)[ 0 ], (*pFrameInfo->bssId)[ 1 ], (*pFrameInfo->bssId)[ 2 ], (*pFrameInfo->bssId)[ 3 ], (*pFrameInfo->bssId)[ 4 ], (*pFrameInfo->bssId)[ 5 ]); |
| } |
| } |
| break; |
| |
| /* scan was completed successfully */ |
| case SCAN_CRS_SCAN_COMPLETE_OK: |
| /* an error occured, try selecting a site anyway */ |
| case SCAN_CRS_SCAN_ABORTED_FW_RESET: |
| case SCAN_CRS_SCAN_ABORTED_HIGHER_PRIORITY: |
| case SCAN_CRS_SCAN_FAILED: |
| case SCAN_CRS_TSF_ERROR: |
| TRACE1(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_ScanResultCB: received scan complete indication with status %d\n", eStatus); |
| |
| /* stablizie the scan result table - delete its contenst if no results were recived during last scan */ |
| scanResultTable_SetStableState (pSme->hScanResultTable); |
| |
| if (CONNECT_MODE_AUTO == pSme->eConnectMode) |
| { |
| |
| /* try to select a site */ |
| pSme->pCandidate = sme_Select (hSme); |
| |
| /* if no matching site was found */ |
| if (NULL == pSme->pCandidate) |
| { |
| /* for IBSS or any, if no entries where found, add the self site */ |
| if (pSme->eBssType == BSS_INFRASTRUCTURE) |
| { |
| TRACE0(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_ScanResultCB: No candidate available, sending connect failure\n"); |
| |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme); |
| break; |
| } |
| |
| { |
| TI_UINT8 uDesiredChannel; |
| |
| param.paramType = SITE_MGR_DESIRED_CHANNEL_PARAM; |
| siteMgr_getParam(pSme->hSiteMgr, ¶m); |
| uDesiredChannel = param.content.siteMgrDesiredChannel; |
| |
| if (uDesiredChannel >= SITE_MGR_CHANNEL_A_MIN) |
| { |
| param.content.channelCapabilityReq.band = RADIO_BAND_5_0_GHZ; |
| } |
| else |
| { |
| param.content.channelCapabilityReq.band = RADIO_BAND_2_4_GHZ; |
| } |
| |
| /* |
| update the regulatory domain with the selected band |
| */ |
| /* Check if the selected channel is valid according to regDomain */ |
| param.paramType = REGULATORY_DOMAIN_GET_SCAN_CAPABILITIES; |
| param.content.channelCapabilityReq.scanOption = ACTIVE_SCANNING; |
| param.content.channelCapabilityReq.channelNum = uDesiredChannel; |
| |
| regulatoryDomain_getParam (pSme->hRegDomain,¶m); |
| if (!param.content.channelCapabilityRet.channelValidity) |
| { |
| TRACE0(pSme->hReport, REPORT_SEVERITY_INFORMATION , "IBSS SELECT FAILURE - No channel !!!\n\n"); |
| |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme); |
| |
| break; |
| } |
| |
| pSme->pCandidate = (TSiteEntry *)addSelfSite(pSme->hSiteMgr); |
| |
| if (pSme->pCandidate == NULL) |
| { |
| TRACE0(pSme->hReport, REPORT_SEVERITY_ERROR , "IBSS SELECT FAILURE - could not open self site !!!\n\n"); |
| |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme); |
| |
| break; |
| } |
| |
| #ifdef REPORT_LOG |
| TRACE6(pSme->hReport, REPORT_SEVERITY_CONSOLE,"%%%%%%%%%%%%%% SELF SELECT SUCCESS, bssid: %X-%X-%X-%X-%X-%X %%%%%%%%%%%%%%\n\n", pSme->pCandidate->bssid[0], pSme->pCandidate->bssid[1], pSme->pCandidate->bssid[2], pSme->pCandidate->bssid[3], pSme->pCandidate->bssid[4], pSme->pCandidate->bssid[5]); |
| WLAN_OS_REPORT (("%%%%%%%%%%%%%% SELF SELECT SUCCESS, bssid: %02x.%02x.%02x.%02x.%02x.%02x %%%%%%%%%%%%%%\n\n", pSme->pCandidate->bssid[0], pSme->pCandidate->bssid[1], pSme->pCandidate->bssid[2], pSme->pCandidate->bssid[3], pSme->pCandidate->bssid[4], pSme->pCandidate->bssid[5])); |
| #endif |
| } |
| } |
| |
| /* a connection candidate is available, send a connect event */ |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_CONNECT, hSme); |
| } |
| break; |
| |
| /* |
| * scan was stopped according to SME request (should happen when moving to disconnecting from scanning), send a |
| * connect failure event to move out of disconnecting |
| */ |
| case SCAN_CRS_SCAN_STOPPED: |
| TRACE0(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_ScanResultCB: received scan stopped indication\n"); |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme); |
| break; |
| |
| default: |
| TRACE1(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_ScanResultCB: received unrecognized status %d\n", eStatus); |
| break; |
| } |
| } |
| |
| /** |
| * \fn sme_AppScanResult |
| * \brief Callback function from scan concentrator app for results and scan complete indications |
| * |
| * Callback function from scan concentrator app for results and scan complete indications, used |
| * for scans wehen the SME is in manual. |
| * |
| * \param hSme - handle to the SME object |
| * \param eStatus - the reason for calling the CB |
| * \param pFrameInfo - frame information (if the CB is called due to received frame) |
| * \param uResultCount - number of results rceived |
| * \return None |
| */ |
| void sme_AppScanResult (TI_HANDLE hSme, EScanCncnResultStatus eStatus, |
| TScanFrameInfo* pFrameInfo) |
| { |
| TSme *pSme = (TSme*)hSme; |
| |
| /* in manual mode, store the frame in the SME scan result table */ |
| if (CONNECT_MODE_MANUAL == pSme->eConnectMode) |
| { |
| switch (eStatus) |
| { |
| /* a frame was received - update the scan result table */ |
| case SCAN_CRS_RECEIVED_FRAME: |
| TRACE6(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_AppScanResult: received frame from BSSID %02x:%02x:%02x:%02x:%02x:%02x\n", (*pFrameInfo->bssId)[ 0 ], (*pFrameInfo->bssId)[ 1 ], (*pFrameInfo->bssId)[ 2 ], (*pFrameInfo->bssId)[ 3 ], (*pFrameInfo->bssId)[ 4 ], (*pFrameInfo->bssId)[ 5 ]); |
| |
| if (TI_OK != scanResultTable_UpdateEntry (pSme->hScanResultTable, pFrameInfo->bssId, pFrameInfo)) |
| { |
| TRACE6(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_AppScanResult: unable to update entry for BSSID %02x:%02x:%02x:%02x:%02x:%02x because table is full\n", (*pFrameInfo->bssId)[ 0 ], (*pFrameInfo->bssId)[ 1 ], (*pFrameInfo->bssId)[ 2 ], (*pFrameInfo->bssId)[ 3 ], (*pFrameInfo->bssId)[ 4 ], (*pFrameInfo->bssId)[ 5 ]); |
| } |
| break; |
| |
| /* scan was completed successfully */ |
| case SCAN_CRS_SCAN_COMPLETE_OK: |
| /* an error occured, try selecting a site anyway */ |
| case SCAN_CRS_SCAN_ABORTED_FW_RESET: |
| case SCAN_CRS_SCAN_STOPPED: |
| case SCAN_CRS_SCAN_ABORTED_HIGHER_PRIORITY: |
| case SCAN_CRS_SCAN_FAILED: |
| case SCAN_CRS_TSF_ERROR: |
| TRACE1(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_AppScanResult: received scan complete indication with status %d\n", eStatus); |
| |
| /* stablizie the scan result table - delete its contenst if no results were recived during last scan */ |
| scanResultTable_SetStableState (pSme->hScanResultTable); |
| break; |
| |
| default: |
| TRACE1(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_AppScanResult: received unrecognized status %d\n", eStatus); |
| break; |
| } |
| } |
| } |
| |
| |
| /** |
| * \fn sme_MeansurementScanResult |
| * \brief Callback function from Meansurement for results |
| * |
| * Callback function from Meansurement for results used for scans wehen the SME is in Meansurement. |
| * |
| * \param hSme - handle to the SME object |
| * \param pFrameInfo - frame information (if the CB is called due to received frame) |
| * \return None |
| */ |
| void sme_MeansurementScanResult (TI_HANDLE hSme, EScanCncnResultStatus eStatus, TScanFrameInfo* pFrameInfo) |
| { |
| TSme *pSme = (TSme*)hSme; |
| |
| switch (eStatus) |
| { |
| /* a frame was received - update the scan result table */ |
| case SCAN_CRS_RECEIVED_FRAME: |
| TRACE6(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_MeansurementScanResult: received frame from BSSID %02x:%02x:%02x:%02x:%02x:%02x\n", (*pFrameInfo->bssId)[ 0 ], (*pFrameInfo->bssId)[ 1 ], (*pFrameInfo->bssId)[ 2 ], (*pFrameInfo->bssId)[ 3 ], (*pFrameInfo->bssId)[ 4 ], (*pFrameInfo->bssId)[ 5 ]); |
| |
| if (TI_OK != scanResultTable_UpdateEntry (pSme->hScanResultTable, pFrameInfo->bssId, pFrameInfo)) |
| { |
| TRACE6(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_MeansurementScanResult: unable to update entry for BSSID %02x:%02x:%02x:%02x:%02x:%02x because table is full\n", (*pFrameInfo->bssId)[ 0 ], (*pFrameInfo->bssId)[ 1 ], (*pFrameInfo->bssId)[ 2 ], (*pFrameInfo->bssId)[ 3 ], (*pFrameInfo->bssId)[ 4 ], (*pFrameInfo->bssId)[ 5 ]); |
| } |
| break; |
| |
| /* scan was completed successfully */ |
| case SCAN_CRS_SCAN_COMPLETE_OK: |
| /* an error occured, try selecting a site anyway */ |
| case SCAN_CRS_SCAN_ABORTED_FW_RESET: |
| case SCAN_CRS_SCAN_STOPPED: |
| case SCAN_CRS_SCAN_ABORTED_HIGHER_PRIORITY: |
| case SCAN_CRS_SCAN_FAILED: |
| case SCAN_CRS_TSF_ERROR: |
| TRACE1(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_MeansurementScanResult: received scan complete indication with status %d\n", eStatus); |
| |
| /* stablizie the scan result table - delete its contenst if no results were recived during last scan */ |
| scanResultTable_SetStableState (pSme->hScanResultTable); |
| break; |
| |
| default: |
| TRACE1(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_AppScanResult: received unrecognized status %d\n", eStatus); |
| break; |
| } |
| |
| } |
| |
| |
| /** |
| * \fn Function declaration |
| * \brief Function brief description goes here |
| * |
| * Function detailed description goes here |
| * |
| * \note Note is indicated here |
| * \param Parameter name - parameter description |
| * \param
|
| * \return Return code is detailed here |
| * \sa Reference to other relevant functions |
| */ |
| void sme_ReportConnStatus (TI_HANDLE hSme, mgmtStatus_e eStatusType, TI_UINT32 uStatusCode) |
| { |
| TSme *pSme = (TSme*)hSme; |
| |
| TRACE2(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_ReportConnStatus: statusType = %d, uStatusCode = %d\n", eStatusType, uStatusCode); |
| |
| /* Act according to status */ |
| switch (eStatusType) |
| { |
| /* connection was successful */ |
| case STATUS_SUCCESSFUL: |
| pSme->bAuthSent = TI_TRUE; |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_CONNECT_SUCCESS, hSme); |
| break; |
| |
| case STATUS_ASSOC_REJECT: |
| case STATUS_SECURITY_FAILURE: |
| case STATUS_AP_DEAUTHENTICATE: |
| case STATUS_AP_DISASSOCIATE: |
| case STATUS_ROAMING_TRIGGER: |
| case STATUS_AUTH_REJECT: |
| /* Indicate the authentication and/or association was sent to the AP */ |
| pSme->bAuthSent = TI_TRUE; |
| |
| /* keep the disassociation status and code, for sending event to user-mode */ |
| pSme->tDisAssoc.eMgmtStatus = eStatusType; |
| pSme->tDisAssoc.uStatusCode = uStatusCode; |
| |
| /* try to find the next connection candidate */ |
| pSme->pCandidate = sme_Select (hSme); |
| /* if the next connection candidate exists */ |
| if (NULL != pSme->pCandidate) |
| { |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_CONNECT, hSme); |
| } |
| else |
| { |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme); |
| } |
| break; |
| |
| /* Note that in case of unspecified status we won't update the status. This is done since this function could be called twice */ |
| /* for example: apConn called this function and than SME called conn_stop and this function is called again */ |
| /* we use this status at SME, if != 0 means that assoc frame sent */ |
| case STATUS_UNSPECIFIED: |
| if (0 != uStatusCode) |
| { |
| pSme->bAuthSent = TI_TRUE; |
| } |
| |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme); |
| break; |
| |
| default: |
| TRACE1(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_ReportConnStatus: unknown statusType = %d\n", eStatusType); |
| break; |
| } |
| } |
| |
| /** |
| * \fn sme_ReportApConnStatus |
| * \brief Used by AP connection (and Soft-gemini) modules to report connection status |
| * |
| * Used by AP connection (and Soft-gemini) modules to report connection status |
| * |
| * \param hSme - handle to the SME object |
| * \param eStatusType - connection status |
| * \param uStatus code - extended status information (if available) |
| * \return None |
| * \sa sme_ReportConnStatus |
| */ |
| void sme_ReportApConnStatus (TI_HANDLE hSme, mgmtStatus_e eStatusType, TI_UINT32 uStatusCode) |
| { |
| TSme *pSme = (TSme*)hSme; |
| |
| TRACE2(pSme->hReport, REPORT_SEVERITY_INFORMATION , "sme_ReportApConnStatus: statusType = %d, uStatusCode = %d\n", eStatusType, uStatusCode); |
| |
| /* Act according to status */ |
| switch (eStatusType) |
| { |
| |
| /* SG re-select */ |
| case STATUS_SG_RESELECT: |
| pSme->bReselect = TI_TRUE; |
| pSme->bConnectRequired = TI_TRUE; |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme); |
| break; |
| |
| /* shouldn't happen (not from AP conn) */ |
| case STATUS_SUCCESSFUL: |
| TRACE0(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_ReportApConnStatus: received STATUS_SUCCESSFUL\n"); |
| break; |
| |
| case STATUS_UNSPECIFIED: |
| case STATUS_AUTH_REJECT: |
| case STATUS_ASSOC_REJECT: |
| case STATUS_SECURITY_FAILURE: |
| case STATUS_AP_DEAUTHENTICATE: |
| case STATUS_AP_DISASSOCIATE: |
| case STATUS_ROAMING_TRIGGER: |
| |
| /* keep the disassociation status and code, for sending event to user-mode */ |
| pSme->tDisAssoc.eMgmtStatus = eStatusType; |
| pSme->tDisAssoc.uStatusCode = uStatusCode; |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_CONNECT_FAILURE, hSme); |
| break; |
| |
| case STATUS_DISCONNECT_DURING_CONNECT: |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme); |
| break; |
| |
| default: |
| TRACE1(pSme->hReport, REPORT_SEVERITY_ERROR , "sme_ReportApConnStatus: received unrecognized status: %d\n", eStatusType); |
| |
| } |
| } |
| |
| /** |
| * \fn sme_GetSmeScanResultTableHandler |
| * \brief get the handler to the Sme Scan Result Table. |
| * |
| * \param hSme - handle to the SME object |
| * \param uStatus code - extended status information (if available) |
| * \return None |
| * \sa sme_ReportConnStatus |
| */ |
| void sme_GetSmeScanResultTableHandler (TI_HANDLE hSme, TI_HANDLE *hScanResultTable) |
| { |
| TSme *pSme = (TSme*)hSme; |
| |
| *hScanResultTable = pSme->hScanResultTable; |
| } |
| |
| /** |
| * \fn SME_ConnectRequired |
| * \brief start connection sequence by set the flag ConnectRequired and issue DISCONNECT event. |
| * called by CommandDispatcher in OSE OS. |
| * |
| * \param hSme - handle to the SME object |
| * \return None |
| * \sa SME_Disconnect |
| */ |
| void SME_ConnectRequired (TI_HANDLE hSme) |
| { |
| TSme *pSme = (TSme*)hSme; |
| |
| pSme->bRadioOn = TI_TRUE; |
| pSme->uScanCount = 0; |
| pSme->bConnectRequired = TI_TRUE; |
| |
| /* now send a disconnect event */ |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme); |
| } |
| |
| /** |
| * \fn SME_Disconnect |
| * \brief perform disconnect by clear the flag ConnectRequired and issue DISCONNECT event. |
| * |
| * \param hSme - handle to the SME object |
| * \return None |
| * \sa SME_ConnectRequired |
| */ |
| void SME_Disconnect (TI_HANDLE hSme) |
| { |
| TSme *pSme = (TSme*)hSme; |
| |
| pSme->bConnectRequired = TI_FALSE; |
| /* turn off WSC PB mode */ |
| pSme->bConstantScan = TI_FALSE; |
| |
| /* now send a disconnect event */ |
| genSM_Event (pSme->hSmeSm, SME_SM_EVENT_DISCONNECT, hSme); |
| } |
