blob: dff07f52f8918a42df30d0989ecc71582be3d18f [file] [log] [blame]
/*
* Copyright (C) 2007 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#pragma once
#include <stdint.h>
#define BOOT_MAGIC "ANDROID!"
#define BOOT_MAGIC_SIZE 8
#define BOOT_NAME_SIZE 16
#define BOOT_ARGS_SIZE 512
#define BOOT_EXTRA_ARGS_SIZE 1024
#define VENDOR_BOOT_MAGIC "VNDRBOOT"
#define VENDOR_BOOT_MAGIC_SIZE 8
#define VENDOR_BOOT_ARGS_SIZE 2048
#define VENDOR_BOOT_NAME_SIZE 16
// The bootloader expects the structure of boot_img_hdr with header
// version 0 to be as follows:
struct boot_img_hdr_v0 {
// Must be BOOT_MAGIC.
uint8_t magic[BOOT_MAGIC_SIZE];
uint32_t kernel_size; /* size in bytes */
uint32_t kernel_addr; /* physical load addr */
uint32_t ramdisk_size; /* size in bytes */
uint32_t ramdisk_addr; /* physical load addr */
uint32_t second_size; /* size in bytes */
uint32_t second_addr; /* physical load addr */
uint32_t tags_addr; /* physical addr for kernel tags (if required) */
uint32_t page_size; /* flash page size we assume */
// Version of the boot image header.
uint32_t header_version;
// Operating system version and security patch level.
// For version "A.B.C" and patch level "Y-M-D":
// (7 bits for each of A, B, C; 7 bits for (Y-2000), 4 bits for M)
// os_version = A[31:25] B[24:18] C[17:11] (Y-2000)[10:4] M[3:0]
uint32_t os_version;
#if __cplusplus
void SetOsVersion(unsigned major, unsigned minor, unsigned patch) {
os_version &= ((1 << 11) - 1);
os_version |= (((major & 0x7f) << 25) | ((minor & 0x7f) << 18) | ((patch & 0x7f) << 11));
}
void SetOsPatchLevel(unsigned year, unsigned month) {
os_version &= ~((1 << 11) - 1);
os_version |= (((year - 2000) & 0x7f) << 4) | ((month & 0xf) << 0);
}
#endif
uint8_t name[BOOT_NAME_SIZE]; /* asciiz product name */
uint8_t cmdline[BOOT_ARGS_SIZE];
uint32_t id[8]; /* timestamp / checksum / sha1 / etc */
// Supplemental command line data; kept here to maintain
// binary compatibility with older versions of mkbootimg.
uint8_t extra_cmdline[BOOT_EXTRA_ARGS_SIZE];
} __attribute__((packed));
/*
* It is expected that callers would explicitly specify which version of the
* boot image header they need to use.
*/
typedef struct boot_img_hdr_v0 boot_img_hdr;
/* When a boot header is of version 0, the structure of boot image is as
* follows:
*
* +-----------------+
* | boot header | 1 page
* +-----------------+
* | kernel | n pages
* +-----------------+
* | ramdisk | m pages
* +-----------------+
* | second stage | o pages
* +-----------------+
*
* n = (kernel_size + page_size - 1) / page_size
* m = (ramdisk_size + page_size - 1) / page_size
* o = (second_size + page_size - 1) / page_size
*
* 0. all entities are page_size aligned in flash
* 1. kernel and ramdisk are required (size != 0)
* 2. second is optional (second_size == 0 -> no second)
* 3. load each element (kernel, ramdisk, second) at
* the specified physical address (kernel_addr, etc)
* 4. prepare tags at tag_addr. kernel_args[] is
* appended to the kernel commandline in the tags.
* 5. r0 = 0, r1 = MACHINE_TYPE, r2 = tags_addr
* 6. if second_size != 0: jump to second_addr
* else: jump to kernel_addr
*/
struct boot_img_hdr_v1 : public boot_img_hdr_v0 {
uint32_t recovery_dtbo_size; /* size in bytes for recovery DTBO/ACPIO image */
uint64_t recovery_dtbo_offset; /* offset to recovery dtbo/acpio in boot image */
uint32_t header_size;
} __attribute__((packed));
/* When the boot image header has a version of 2, the structure of the boot
* image is as follows:
*
* +---------------------+
* | boot header | 1 page
* +---------------------+
* | kernel | n pages
* +---------------------+
* | ramdisk | m pages
* +---------------------+
* | second stage | o pages
* +---------------------+
* | recovery dtbo/acpio | p pages
* +---------------------+
* | dtb | q pages
* +---------------------+
* n = (kernel_size + page_size - 1) / page_size
* m = (ramdisk_size + page_size - 1) / page_size
* o = (second_size + page_size - 1) / page_size
* p = (recovery_dtbo_size + page_size - 1) / page_size
* q = (dtb_size + page_size - 1) / page_size
*
* 0. all entities are page_size aligned in flash
* 1. kernel, ramdisk and DTB are required (size != 0)
* 2. recovery_dtbo/recovery_acpio is required for recovery.img in non-A/B
* devices(recovery_dtbo_size != 0)
* 3. second is optional (second_size == 0 -> no second)
* 4. load each element (kernel, ramdisk, second, dtb) at
* the specified physical address (kernel_addr, etc)
* 5. If booting to recovery mode in a non-A/B device, extract recovery
* dtbo/acpio and apply the correct set of overlays on the base device tree
* depending on the hardware/product revision.
* 6. set up registers for kernel entry as required by your architecture
* 7. if second_size != 0: jump to second_addr
* else: jump to kernel_addr
*/
struct boot_img_hdr_v2 : public boot_img_hdr_v1 {
uint32_t dtb_size; /* size in bytes for DTB image */
uint64_t dtb_addr; /* physical load address for DTB image */
} __attribute__((packed));
/* When the boot image header has a version of 3, the structure of the boot
* image is as follows:
*
* +---------------------+
* | boot header | 4096 bytes
* +---------------------+
* | kernel | m pages
* +---------------------+
* | ramdisk | n pages
* +---------------------+
*
* m = (kernel_size + 4096 - 1) / 4096
* n = (ramdisk_size + 4096 - 1) / 4096
*
* Note that in version 3 of the boot image header, page size is fixed at 4096 bytes.
*
* The structure of the vendor boot image (introduced with version 3 and
* required to be present when a v3 boot image is used) is as follows:
*
* +---------------------+
* | vendor boot header | o pages
* +---------------------+
* | vendor ramdisk | p pages
* +---------------------+
* | dtb | q pages
* +---------------------+
* o = (2108 + page_size - 1) / page_size
* p = (vendor_ramdisk_size + page_size - 1) / page_size
* q = (dtb_size + page_size - 1) / page_size
*
* 0. all entities in the boot image are 4096-byte aligned in flash, all
* entities in the vendor boot image are page_size (determined by the vendor
* and specified in the vendor boot image header) aligned in flash
* 1. kernel, ramdisk, vendor ramdisk, and DTB are required (size != 0)
* 2. load the kernel and DTB at the specified physical address (kernel_addr,
* dtb_addr)
* 3. load the vendor ramdisk at ramdisk_addr
* 4. load the generic ramdisk immediately following the vendor ramdisk in
* memory
* 5. set up registers for kernel entry as required by your architecture
* 6. if the platform has a second stage bootloader jump to it (must be
* contained outside boot and vendor boot partitions), otherwise
* jump to kernel_addr
*/
struct boot_img_hdr_v3 {
// Must be BOOT_MAGIC.
uint8_t magic[BOOT_MAGIC_SIZE];
uint32_t kernel_size; /* size in bytes */
uint32_t ramdisk_size; /* size in bytes */
// Operating system version and security patch level.
// For version "A.B.C" and patch level "Y-M-D":
// (7 bits for each of A, B, C; 7 bits for (Y-2000), 4 bits for M)
// os_version = A[31:25] B[24:18] C[17:11] (Y-2000)[10:4] M[3:0]
uint32_t os_version;
#if __cplusplus
void SetOsVersion(unsigned major, unsigned minor, unsigned patch) {
os_version &= ((1 << 11) - 1);
os_version |= (((major & 0x7f) << 25) | ((minor & 0x7f) << 18) | ((patch & 0x7f) << 11));
}
void SetOsPatchLevel(unsigned year, unsigned month) {
os_version &= ~((1 << 11) - 1);
os_version |= (((year - 2000) & 0x7f) << 4) | ((month & 0xf) << 0);
}
#endif
uint32_t header_size;
uint32_t reserved[4];
// Version of the boot image header.
uint32_t header_version;
uint8_t cmdline[BOOT_ARGS_SIZE + BOOT_EXTRA_ARGS_SIZE];
} __attribute__((packed));
struct vendor_boot_img_hdr_v3 {
// Must be VENDOR_BOOT_MAGIC.
uint8_t magic[VENDOR_BOOT_MAGIC_SIZE];
// Version of the vendor boot image header.
uint32_t header_version;
uint32_t page_size; /* flash page size we assume */
uint32_t kernel_addr; /* physical load addr */
uint32_t ramdisk_addr; /* physical load addr */
uint32_t vendor_ramdisk_size; /* size in bytes */
uint8_t cmdline[VENDOR_BOOT_ARGS_SIZE];
uint32_t tags_addr; /* physical addr for kernel tags (if required) */
uint8_t name[VENDOR_BOOT_NAME_SIZE]; /* asciiz product name */
uint32_t header_size;
uint32_t dtb_size; /* size in bytes for DTB image */
uint64_t dtb_addr; /* physical load address for DTB image */
} __attribute__((packed));