| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <map> |
| #include <string> |
| |
| #include <arpa/inet.h> |
| #include <errno.h> |
| #include <linux/if_tun.h> |
| #include <linux/ioctl.h> |
| #include <net/if.h> |
| #include <netinet/in.h> |
| #include <spawn.h> |
| #include <sys/types.h> |
| #include <sys/wait.h> |
| #include <unistd.h> |
| |
| #define LOG_TAG "ClatdController" |
| #include <log/log.h> |
| |
| #include "ClatdController.h" |
| #include "InterfaceController.h" |
| |
| #include "android-base/properties.h" |
| #include "android-base/scopeguard.h" |
| #include "android-base/stringprintf.h" |
| #include "android-base/unique_fd.h" |
| #include "bpf/BpfMap.h" |
| #include "netdbpf/bpf_shared.h" |
| #include "netdutils/DumpWriter.h" |
| |
| extern "C" { |
| #include "netutils/checksum.h" |
| } |
| |
| #include "Fwmark.h" |
| #include "NetdConstants.h" |
| #include "NetworkController.h" |
| #include "OffloadUtils.h" |
| #include "netid_client.h" |
| |
| static const char* kClatdPath = "/system/bin/clatd"; |
| |
| // For historical reasons, start with 192.0.0.4, and after that, use all subsequent addresses in |
| // 192.0.0.0/29 (RFC 7335). |
| static const char* kV4AddrString = "192.0.0.4"; |
| static const in_addr kV4Addr = {inet_addr(kV4AddrString)}; |
| static const int kV4AddrLen = 29; |
| |
| using android::base::Result; |
| using android::base::StringPrintf; |
| using android::base::unique_fd; |
| using android::bpf::BpfMap; |
| using android::netdutils::DumpWriter; |
| using android::netdutils::ScopedIndent; |
| |
| namespace android { |
| namespace net { |
| |
| void ClatdController::init(void) { |
| std::lock_guard guard(mutex); |
| |
| int rv = getClatEgress4MapFd(); |
| if (rv < 0) { |
| ALOGE("getClatEgress4MapFd() failure: %s", strerror(-rv)); |
| return; |
| } |
| mClatEgress4Map.reset(rv); |
| |
| rv = getClatIngress6MapFd(); |
| if (rv < 0) { |
| ALOGE("getClatIngress6MapFd() failure: %s", strerror(-rv)); |
| mClatEgress4Map.reset(-1); |
| return; |
| } |
| mClatIngress6Map.reset(rv); |
| |
| mClatEgress4Map.clear(); |
| mClatIngress6Map.clear(); |
| } |
| |
| bool ClatdController::isIpv4AddressFree(in_addr_t addr) { |
| int s = socket(AF_INET, SOCK_DGRAM | SOCK_CLOEXEC, 0); |
| if (s == -1) { |
| return 0; |
| } |
| |
| // Attempt to connect to the address. If the connection succeeds and getsockname returns the |
| // same then the address is already assigned to the system and we can't use it. |
| struct sockaddr_in sin = { |
| .sin_family = AF_INET, |
| .sin_port = htons(53), |
| .sin_addr = {addr}, |
| }; |
| socklen_t len = sizeof(sin); |
| bool inuse = connect(s, (struct sockaddr*)&sin, sizeof(sin)) == 0 && |
| getsockname(s, (struct sockaddr*)&sin, &len) == 0 && (size_t)len >= sizeof(sin) && |
| sin.sin_addr.s_addr == addr; |
| |
| close(s); |
| return !inuse; |
| } |
| |
| // Picks a free IPv4 address, starting from ip and trying all addresses in the prefix in order. |
| // ip - the IP address from the configuration file |
| // prefixlen - the length of the prefix from which addresses may be selected. |
| // returns: the IPv4 address, or INADDR_NONE if no addresses were available |
| in_addr_t ClatdController::selectIpv4Address(const in_addr ip, int16_t prefixlen) { |
| // Don't accept prefixes that are too large because we scan addresses one by one. |
| if (prefixlen < 16 || prefixlen > 32) { |
| return INADDR_NONE; |
| } |
| |
| // All these are in host byte order. |
| in_addr_t mask = 0xffffffff >> (32 - prefixlen) << (32 - prefixlen); |
| in_addr_t ipv4 = ntohl(ip.s_addr); |
| in_addr_t first_ipv4 = ipv4; |
| in_addr_t prefix = ipv4 & mask; |
| |
| // Pick the first IPv4 address in the pool, wrapping around if necessary. |
| // So, for example, 192.0.0.4 -> 192.0.0.5 -> 192.0.0.6 -> 192.0.0.7 -> 192.0.0.0. |
| do { |
| if (isIpv4AddressFreeFunc(htonl(ipv4))) { |
| return htonl(ipv4); |
| } |
| ipv4 = prefix | ((ipv4 + 1) & ~mask); |
| } while (ipv4 != first_ipv4); |
| |
| return INADDR_NONE; |
| } |
| |
| // Alters the bits in the IPv6 address to make them checksum neutral with v4 and nat64Prefix. |
| void ClatdController::makeChecksumNeutral(in6_addr* v6, const in_addr v4, |
| const in6_addr& nat64Prefix) { |
| // Fill last 8 bytes of IPv6 address with random bits. |
| arc4random_buf(&v6->s6_addr[8], 8); |
| |
| // Make the IID checksum-neutral. That is, make it so that: |
| // checksum(Local IPv4 | Remote IPv4) = checksum(Local IPv6 | Remote IPv6) |
| // in other words (because remote IPv6 = NAT64 prefix | Remote IPv4): |
| // checksum(Local IPv4) = checksum(Local IPv6 | NAT64 prefix) |
| // Do this by adjusting the two bytes in the middle of the IID. |
| |
| uint16_t middlebytes = (v6->s6_addr[11] << 8) + v6->s6_addr[12]; |
| |
| uint32_t c1 = ip_checksum_add(0, &v4, sizeof(v4)); |
| uint32_t c2 = ip_checksum_add(0, &nat64Prefix, sizeof(nat64Prefix)) + |
| ip_checksum_add(0, v6, sizeof(*v6)); |
| |
| uint16_t delta = ip_checksum_adjust(middlebytes, c1, c2); |
| v6->s6_addr[11] = delta >> 8; |
| v6->s6_addr[12] = delta & 0xff; |
| } |
| |
| // Picks a random interface ID that is checksum neutral with the IPv4 address and the NAT64 prefix. |
| int ClatdController::generateIpv6Address(const char* iface, const in_addr v4, |
| const in6_addr& nat64Prefix, in6_addr* v6) { |
| unique_fd s(socket(AF_INET6, SOCK_DGRAM | SOCK_CLOEXEC, 0)); |
| if (s == -1) return -errno; |
| |
| if (setsockopt(s, SOL_SOCKET, SO_BINDTODEVICE, iface, strlen(iface) + 1) == -1) { |
| return -errno; |
| } |
| |
| sockaddr_in6 sin6 = {.sin6_family = AF_INET6, .sin6_addr = nat64Prefix}; |
| if (connect(s, reinterpret_cast<struct sockaddr*>(&sin6), sizeof(sin6)) == -1) { |
| return -errno; |
| } |
| |
| socklen_t len = sizeof(sin6); |
| if (getsockname(s, reinterpret_cast<struct sockaddr*>(&sin6), &len) == -1) { |
| return -errno; |
| } |
| |
| *v6 = sin6.sin6_addr; |
| |
| if (IN6_IS_ADDR_UNSPECIFIED(v6) || IN6_IS_ADDR_LOOPBACK(v6) || IN6_IS_ADDR_LINKLOCAL(v6) || |
| IN6_IS_ADDR_SITELOCAL(v6) || IN6_IS_ADDR_ULA(v6)) { |
| return -ENETUNREACH; |
| } |
| |
| makeChecksumNeutral(v6, v4, nat64Prefix); |
| |
| return 0; |
| } |
| |
| void ClatdController::maybeStartBpf(const ClatdTracker& tracker) { |
| auto isEthernet = android::net::isEthernet(tracker.iface); |
| if (!isEthernet.ok()) { |
| ALOGE("isEthernet(%s[%d]) failure: %s", tracker.iface, tracker.ifIndex, |
| isEthernet.error().message().c_str()); |
| return; |
| } |
| |
| // This program will be attached to the v4-* interface which is a TUN and thus always rawip. |
| int rv = getClatEgress4ProgFd(RAWIP); |
| if (rv < 0) { |
| ALOGE("getClatEgress4ProgFd(RAWIP) failure: %s", strerror(-rv)); |
| return; |
| } |
| unique_fd txRawIpProgFd(rv); |
| |
| rv = getClatIngress6ProgFd(isEthernet.value()); |
| if (rv < 0) { |
| ALOGE("getClatIngress6ProgFd(%d) failure: %s", isEthernet.value(), strerror(-rv)); |
| return; |
| } |
| unique_fd rxProgFd(rv); |
| |
| ClatEgress4Key txKey = { |
| .iif = tracker.v4ifIndex, |
| .local4 = tracker.v4, |
| }; |
| ClatEgress4Value txValue = { |
| .oif = tracker.ifIndex, |
| .local6 = tracker.v6, |
| .pfx96 = tracker.pfx96, |
| .oifIsEthernet = isEthernet.value(), |
| }; |
| |
| auto ret = mClatEgress4Map.writeValue(txKey, txValue, BPF_ANY); |
| if (!ret.ok()) { |
| ALOGE("mClatEgress4Map.writeValue failure: %s", strerror(ret.error().code())); |
| return; |
| } |
| |
| ClatIngress6Key rxKey = { |
| .iif = tracker.ifIndex, |
| .pfx96 = tracker.pfx96, |
| .local6 = tracker.v6, |
| }; |
| ClatIngress6Value rxValue = { |
| // TODO: move all the clat code to eBPF and remove the tun interface entirely. |
| .oif = tracker.v4ifIndex, |
| .local4 = tracker.v4, |
| }; |
| |
| ret = mClatIngress6Map.writeValue(rxKey, rxValue, BPF_ANY); |
| if (!ret.ok()) { |
| ALOGE("mClatIngress6Map.writeValue failure: %s", strerror(ret.error().code())); |
| ret = mClatEgress4Map.deleteValue(txKey); |
| if (!ret.ok()) |
| ALOGE("mClatEgress4Map.deleteValue failure: %s", strerror(ret.error().code())); |
| return; |
| } |
| |
| // We do tc setup *after* populating the maps, so scanning through them |
| // can always be used to tell us what needs cleanup. |
| |
| // Usually the clsact will be added in RouteController::addInterfaceToPhysicalNetwork. |
| // But clat is started before the v4- interface is added to the network. The clat startup have |
| // to add clsact of v4- tun interface first for adding bpf filter in maybeStartBpf. |
| // TODO: move "qdisc add clsact" of v4- tun interface out from ClatdController. |
| rv = tcQdiscAddDevClsact(tracker.v4ifIndex); |
| if (rv) { |
| ALOGE("tcQdiscAddDevClsact(%d[%s]) failure: %s", tracker.v4ifIndex, tracker.v4iface, |
| strerror(-rv)); |
| ret = mClatEgress4Map.deleteValue(txKey); |
| if (!ret.ok()) |
| ALOGE("mClatEgress4Map.deleteValue failure: %s", strerror(ret.error().code())); |
| ret = mClatIngress6Map.deleteValue(rxKey); |
| if (!ret.ok()) |
| ALOGE("mClatIngress6Map.deleteValue failure: %s", strerror(ret.error().code())); |
| return; |
| } |
| |
| rv = tcFilterAddDevEgressClatIpv4(tracker.v4ifIndex, txRawIpProgFd, RAWIP); |
| if (rv) { |
| ALOGE("tcFilterAddDevEgressClatIpv4(%d[%s], RAWIP) failure: %s", tracker.v4ifIndex, |
| tracker.v4iface, strerror(-rv)); |
| |
| // The v4- interface clsact is not deleted for unwinding error because once it is created |
| // with interface addition, the lifetime is till interface deletion. Moreover, the clsact |
| // has no clat filter now. It should not break anything. |
| |
| ret = mClatEgress4Map.deleteValue(txKey); |
| if (!ret.ok()) |
| ALOGE("mClatEgress4Map.deleteValue failure: %s", strerror(ret.error().code())); |
| ret = mClatIngress6Map.deleteValue(rxKey); |
| if (!ret.ok()) |
| ALOGE("mClatIngress6Map.deleteValue failure: %s", strerror(ret.error().code())); |
| return; |
| } |
| |
| rv = tcFilterAddDevIngressClatIpv6(tracker.ifIndex, rxProgFd, isEthernet.value()); |
| if (rv) { |
| ALOGE("tcFilterAddDevIngressClatIpv6(%d[%s], %d) failure: %s", tracker.ifIndex, |
| tracker.iface, isEthernet.value(), strerror(-rv)); |
| rv = tcFilterDelDevEgressClatIpv4(tracker.v4ifIndex); |
| if (rv) { |
| ALOGE("tcFilterDelDevEgressClatIpv4(%d[%s]) failure: %s", tracker.v4ifIndex, |
| tracker.v4iface, strerror(-rv)); |
| } |
| |
| // The v4- interface clsact is not deleted. See the reason in the error unwinding code of |
| // the egress filter attaching of v4- tun interface. |
| |
| ret = mClatEgress4Map.deleteValue(txKey); |
| if (!ret.ok()) |
| ALOGE("mClatEgress4Map.deleteValue failure: %s", strerror(ret.error().code())); |
| ret = mClatIngress6Map.deleteValue(rxKey); |
| if (!ret.ok()) |
| ALOGE("mClatIngress6Map.deleteValue failure: %s", strerror(ret.error().code())); |
| return; |
| } |
| |
| // success |
| } |
| |
| void ClatdController::setIptablesDropRule(bool add, const char* iface, const char* pfx96Str, |
| const char* v6Str) { |
| std::string cmd = StringPrintf( |
| "*raw\n" |
| "%s %s -i %s -s %s/96 -d %s -j DROP\n" |
| "COMMIT\n", |
| (add ? "-A" : "-D"), LOCAL_RAW_PREROUTING, iface, pfx96Str, v6Str); |
| |
| iptablesRestoreFunction(V6, cmd); |
| } |
| |
| void ClatdController::maybeStopBpf(const ClatdTracker& tracker) { |
| int rv = tcFilterDelDevIngressClatIpv6(tracker.ifIndex); |
| if (rv < 0) { |
| ALOGE("tcFilterDelDevIngressClatIpv6(%d[%s]) failure: %s", tracker.ifIndex, tracker.iface, |
| strerror(-rv)); |
| } |
| |
| rv = tcFilterDelDevEgressClatIpv4(tracker.v4ifIndex); |
| if (rv < 0) { |
| ALOGE("tcFilterDelDevEgressClatIpv4(%d[%s]) failure: %s", tracker.v4ifIndex, |
| tracker.v4iface, strerror(-rv)); |
| } |
| |
| // We cleanup the maps last, so scanning through them can be used to |
| // determine what still needs cleanup. |
| |
| ClatEgress4Key txKey = { |
| .iif = tracker.v4ifIndex, |
| .local4 = tracker.v4, |
| }; |
| |
| auto ret = mClatEgress4Map.deleteValue(txKey); |
| if (!ret.ok()) ALOGE("mClatEgress4Map.deleteValue failure: %s", strerror(ret.error().code())); |
| |
| ClatIngress6Key rxKey = { |
| .iif = tracker.ifIndex, |
| .pfx96 = tracker.pfx96, |
| .local6 = tracker.v6, |
| }; |
| |
| ret = mClatIngress6Map.deleteValue(rxKey); |
| if (!ret.ok()) ALOGE("mClatIngress6Map.deleteValue failure: %s", strerror(ret.error().code())); |
| } |
| |
| // Finds the tracker of the clatd running on interface |interface|, or nullptr if clatd has not been |
| // started on |interface|. |
| ClatdController::ClatdTracker* ClatdController::getClatdTracker(const std::string& interface) { |
| auto it = mClatdTrackers.find(interface); |
| return (it == mClatdTrackers.end() ? nullptr : &it->second); |
| } |
| |
| // Initializes a ClatdTracker for the specified interface. |
| int ClatdController::ClatdTracker::init(unsigned networkId, const std::string& interface, |
| const std::string& v4interface, |
| const std::string& nat64Prefix) { |
| fwmark.netId = networkId; |
| fwmark.explicitlySelected = true; |
| fwmark.protectedFromVpn = true; |
| fwmark.permission = PERMISSION_SYSTEM; |
| |
| snprintf(fwmarkString, sizeof(fwmarkString), "0x%x", fwmark.intValue); |
| strlcpy(iface, interface.c_str(), sizeof(iface)); |
| ifIndex = if_nametoindex(iface); |
| strlcpy(v4iface, v4interface.c_str(), sizeof(v4iface)); |
| v4ifIndex = if_nametoindex(v4iface); |
| |
| // Pass in everything that clatd needs: interface, a fwmark for outgoing packets, the NAT64 |
| // prefix, and the IPv4 and IPv6 addresses. |
| // Validate the prefix and strip off the prefix length. |
| uint8_t family; |
| uint8_t prefixLen; |
| int res = parsePrefix(nat64Prefix.c_str(), &family, &pfx96, sizeof(pfx96), &prefixLen); |
| // clatd only supports /96 prefixes. |
| if (res != sizeof(pfx96)) return res; |
| if (family != AF_INET6) return -EAFNOSUPPORT; |
| if (prefixLen != 96) return -EINVAL; |
| if (!inet_ntop(AF_INET6, &pfx96, pfx96String, sizeof(pfx96String))) return -errno; |
| |
| // Pick an IPv4 address. |
| // TODO: this picks the address based on other addresses that are assigned to interfaces, but |
| // the address is only actually assigned to an interface once clatd starts up. So we could end |
| // up with two clatd instances with the same IPv4 address. |
| // Stop doing this and instead pick a free one from the kV4Addr pool. |
| v4 = {selectIpv4Address(kV4Addr, kV4AddrLen)}; |
| if (v4.s_addr == INADDR_NONE) { |
| ALOGE("No free IPv4 address in %s/%d", kV4AddrString, kV4AddrLen); |
| return -EADDRNOTAVAIL; |
| } |
| if (!inet_ntop(AF_INET, &v4, v4Str, sizeof(v4Str))) return -errno; |
| |
| // Generate a checksum-neutral IID. |
| if (generateIpv6Address(iface, v4, pfx96, &v6)) { |
| ALOGE("Unable to find global source address on %s for %s", iface, pfx96String); |
| return -EADDRNOTAVAIL; |
| } |
| if (!inet_ntop(AF_INET6, &v6, v6Str, sizeof(v6Str))) return -errno; |
| |
| ALOGD("starting clatd on %s v4=%s v6=%s pfx96=%s", iface, v4Str, v6Str, pfx96String); |
| return 0; |
| } |
| |
| int ClatdController::startClatd(const std::string& interface, const std::string& nat64Prefix, |
| std::string* v6Str) { |
| std::lock_guard guard(mutex); |
| |
| // 1. fail if pre-existing tracker already exists |
| ClatdTracker* existing = getClatdTracker(interface); |
| if (existing != nullptr) { |
| ALOGE("clatd pid=%d already started on %s", existing->pid, interface.c_str()); |
| return -EBUSY; |
| } |
| |
| // 2. get network id associated with this external interface |
| unsigned networkId = mNetCtrl->getNetworkForInterface(interface.c_str()); |
| if (networkId == NETID_UNSET) { |
| ALOGE("Interface %s not assigned to any netId", interface.c_str()); |
| return -ENODEV; |
| } |
| |
| // 3. open the tun device in non blocking mode as required by clatd |
| int res = open("/dev/net/tun", O_RDWR | O_NONBLOCK | O_CLOEXEC); |
| if (res == -1) { |
| res = errno; |
| ALOGE("open of tun device failed (%s)", strerror(res)); |
| return -res; |
| } |
| unique_fd tmpTunFd(res); |
| |
| // 4. create the v4-... tun interface |
| std::string v4interface("v4-"); |
| v4interface += interface; |
| |
| struct ifreq ifr = { |
| .ifr_flags = IFF_TUN, |
| }; |
| strlcpy(ifr.ifr_name, v4interface.c_str(), sizeof(ifr.ifr_name)); |
| |
| res = ioctl(tmpTunFd, TUNSETIFF, &ifr, sizeof(ifr)); |
| if (res == -1) { |
| res = errno; |
| ALOGE("ioctl(TUNSETIFF) failed (%s)", strerror(res)); |
| return -res; |
| } |
| |
| // disable IPv6 on it - failing to do so is not a critical error |
| res = InterfaceController::setEnableIPv6(v4interface.c_str(), 0); |
| if (res) ALOGE("setEnableIPv6 %s failed (%s)", v4interface.c_str(), strerror(res)); |
| |
| // 5. initialize tracker object |
| ClatdTracker tracker; |
| int ret = tracker.init(networkId, interface, v4interface, nat64Prefix); |
| if (ret) return ret; |
| |
| // 6. create a throwaway socket to reserve a file descriptor number |
| res = socket(AF_INET6, SOCK_DGRAM | SOCK_CLOEXEC, 0); |
| if (res == -1) { |
| res = errno; |
| ALOGE("socket(ipv6/udp) failed (%s)", strerror(res)); |
| return -res; |
| } |
| unique_fd passedTunFd(res); |
| |
| // 7. this is the FD we'll pass to clatd on the cli, so need it as a string |
| char passedTunFdStr[INT32_STRLEN]; |
| snprintf(passedTunFdStr, sizeof(passedTunFdStr), "%d", passedTunFd.get()); |
| |
| // 8. we're going to use this as argv[0] to clatd to make ps output more useful |
| std::string progname("clatd-"); |
| progname += tracker.iface; |
| |
| // clang-format off |
| const char* args[] = {progname.c_str(), |
| "-i", tracker.iface, |
| "-m", tracker.fwmarkString, |
| "-p", tracker.pfx96String, |
| "-4", tracker.v4Str, |
| "-6", tracker.v6Str, |
| "-t", passedTunFdStr, |
| nullptr}; |
| // clang-format on |
| |
| // 9. register vfork requirement |
| posix_spawnattr_t attr; |
| res = posix_spawnattr_init(&attr); |
| if (res) { |
| ALOGE("posix_spawnattr_init failed (%s)", strerror(res)); |
| return -res; |
| } |
| const android::base::ScopeGuard attrGuard = [&] { posix_spawnattr_destroy(&attr); }; |
| res = posix_spawnattr_setflags(&attr, POSIX_SPAWN_USEVFORK); |
| if (res) { |
| ALOGE("posix_spawnattr_setflags failed (%s)", strerror(res)); |
| return -res; |
| } |
| |
| // 10. register dup2() action: this is what 'clears' the CLOEXEC flag |
| // on the tun fd that we want the child clatd process to inherit |
| // (this will happen after the vfork, and before the execve) |
| posix_spawn_file_actions_t fa; |
| res = posix_spawn_file_actions_init(&fa); |
| if (res) { |
| ALOGE("posix_spawn_file_actions_init failed (%s)", strerror(res)); |
| return -res; |
| } |
| const android::base::ScopeGuard faGuard = [&] { posix_spawn_file_actions_destroy(&fa); }; |
| res = posix_spawn_file_actions_adddup2(&fa, tmpTunFd, passedTunFd); |
| if (res) { |
| ALOGE("posix_spawn_file_actions_adddup2 failed (%s)", strerror(res)); |
| return -res; |
| } |
| |
| // 11. add the drop rule for iptables. |
| setIptablesDropRule(true, tracker.iface, tracker.pfx96String, tracker.v6Str); |
| |
| // 12. actually perform vfork/dup2/execve |
| res = posix_spawn(&tracker.pid, kClatdPath, &fa, &attr, (char* const*)args, nullptr); |
| if (res) { |
| ALOGE("posix_spawn failed (%s)", strerror(res)); |
| return -res; |
| } |
| |
| // 13. configure eBPF offload - if possible |
| maybeStartBpf(tracker); |
| |
| mClatdTrackers[interface] = tracker; |
| ALOGD("clatd started on %s", interface.c_str()); |
| |
| *v6Str = tracker.v6Str; |
| return 0; |
| } |
| |
| int ClatdController::stopClatd(const std::string& interface) { |
| std::lock_guard guard(mutex); |
| ClatdTracker* tracker = getClatdTracker(interface); |
| |
| if (tracker == nullptr) { |
| ALOGE("clatd already stopped"); |
| return -ENODEV; |
| } |
| |
| ALOGD("Stopping clatd pid=%d on %s", tracker->pid, interface.c_str()); |
| |
| maybeStopBpf(*tracker); |
| |
| kill(tracker->pid, SIGTERM); |
| waitpid(tracker->pid, nullptr, 0); |
| |
| setIptablesDropRule(false, tracker->iface, tracker->pfx96String, tracker->v6Str); |
| mClatdTrackers.erase(interface); |
| |
| ALOGD("clatd on %s stopped", interface.c_str()); |
| |
| return 0; |
| } |
| |
| void ClatdController::dumpEgress(DumpWriter& dw) { |
| if (!mClatEgress4Map.isValid()) return; // if unsupported just don't dump anything |
| |
| ScopedIndent bpfIndent(dw); |
| dw.println("BPF egress map: iif(iface) v4Addr -> v6Addr nat64Prefix oif(iface)"); |
| |
| ScopedIndent bpfDetailIndent(dw); |
| const auto printClatMap = [&dw](const ClatEgress4Key& key, const ClatEgress4Value& value, |
| const BpfMap<ClatEgress4Key, ClatEgress4Value>&) { |
| char iifStr[IFNAMSIZ] = "?"; |
| char local4Str[INET_ADDRSTRLEN] = "?"; |
| char local6Str[INET6_ADDRSTRLEN] = "?"; |
| char pfx96Str[INET6_ADDRSTRLEN] = "?"; |
| char oifStr[IFNAMSIZ] = "?"; |
| |
| if_indextoname(key.iif, iifStr); |
| inet_ntop(AF_INET, &key.local4, local4Str, sizeof(local4Str)); |
| inet_ntop(AF_INET6, &value.local6, local6Str, sizeof(local6Str)); |
| inet_ntop(AF_INET6, &value.pfx96, pfx96Str, sizeof(pfx96Str)); |
| if_indextoname(value.oif, oifStr); |
| |
| dw.println("%u(%s) %s -> %s %s/96 %u(%s) %s", key.iif, iifStr, local4Str, local6Str, |
| pfx96Str, value.oif, oifStr, value.oifIsEthernet ? "ether" : "rawip"); |
| return Result<void>(); |
| }; |
| auto res = mClatEgress4Map.iterateWithValue(printClatMap); |
| if (!res.ok()) { |
| dw.println("Error printing BPF map: %s", res.error().message().c_str()); |
| } |
| } |
| |
| void ClatdController::dumpIngress(DumpWriter& dw) { |
| if (!mClatIngress6Map.isValid()) return; // if unsupported just don't dump anything |
| |
| ScopedIndent bpfIndent(dw); |
| dw.println("BPF ingress map: iif(iface) nat64Prefix v6Addr -> v4Addr oif(iface)"); |
| |
| ScopedIndent bpfDetailIndent(dw); |
| const auto printClatMap = [&dw](const ClatIngress6Key& key, const ClatIngress6Value& value, |
| const BpfMap<ClatIngress6Key, ClatIngress6Value>&) { |
| char iifStr[IFNAMSIZ] = "?"; |
| char pfx96Str[INET6_ADDRSTRLEN] = "?"; |
| char local6Str[INET6_ADDRSTRLEN] = "?"; |
| char local4Str[INET_ADDRSTRLEN] = "?"; |
| char oifStr[IFNAMSIZ] = "?"; |
| |
| if_indextoname(key.iif, iifStr); |
| inet_ntop(AF_INET6, &key.pfx96, pfx96Str, sizeof(pfx96Str)); |
| inet_ntop(AF_INET6, &key.local6, local6Str, sizeof(local6Str)); |
| inet_ntop(AF_INET, &value.local4, local4Str, sizeof(local4Str)); |
| if_indextoname(value.oif, oifStr); |
| |
| dw.println("%u(%s) %s/96 %s -> %s %u(%s)", key.iif, iifStr, pfx96Str, local6Str, local4Str, |
| value.oif, oifStr); |
| return Result<void>(); |
| }; |
| auto res = mClatIngress6Map.iterateWithValue(printClatMap); |
| if (!res.ok()) { |
| dw.println("Error printing BPF map: %s", res.error().message().c_str()); |
| } |
| } |
| |
| void ClatdController::dumpTrackers(DumpWriter& dw) { |
| ScopedIndent trackerIndent(dw); |
| dw.println("Trackers: iif[iface] nat64Prefix v6Addr -> v4Addr v4iif[v4iface] [fwmark]"); |
| |
| ScopedIndent trackerDetailIndent(dw); |
| for (const auto& pair : mClatdTrackers) { |
| const ClatdTracker& tracker = pair.second; |
| dw.println("%u[%s] %s/96 %s -> %s %u[%s] [%s]", tracker.ifIndex, tracker.iface, |
| tracker.pfx96String, tracker.v6Str, tracker.v4Str, tracker.v4ifIndex, |
| tracker.v4iface, tracker.fwmarkString); |
| } |
| } |
| |
| void ClatdController::dump(DumpWriter& dw) { |
| std::lock_guard guard(mutex); |
| |
| ScopedIndent clatdIndent(dw); |
| dw.println("ClatdController"); |
| |
| dumpTrackers(dw); |
| dumpIngress(dw); |
| dumpEgress(dw); |
| } |
| |
| auto ClatdController::isIpv4AddressFreeFunc = isIpv4AddressFree; |
| auto ClatdController::iptablesRestoreFunction = execIptablesRestore; |
| |
| } // namespace net |
| } // namespace android |
