| /** |
| * Copyright (c) 2016, The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.net; |
| |
| import android.net.UidRangeParcel; |
| import android.net.TetherStatsParcel; |
| import android.net.InterfaceConfigurationParcel; |
| |
| /** {@hide} */ |
| interface INetd { |
| /** |
| * Returns true if the service is responding. |
| */ |
| boolean isAlive(); |
| |
| /** |
| * Replaces the contents of the specified UID-based firewall chain. |
| * |
| * The chain may be a whitelist chain or a blacklist chain. A blacklist chain contains DROP |
| * rules for the specified UIDs and a RETURN rule at the end. A whitelist chain contains RETURN |
| * rules for the system UID range (0 to {@code UID_APP} - 1), RETURN rules for for the specified |
| * UIDs, and a DROP rule at the end. The chain will be created if it does not exist. |
| * |
| * @param chainName The name of the chain to replace. |
| * @param isWhitelist Whether this is a whitelist or blacklist chain. |
| * @param uids The list of UIDs to allow/deny. |
| * @return true if the chain was successfully replaced, false otherwise. |
| */ |
| boolean firewallReplaceUidChain(in @utf8InCpp String chainName, |
| boolean isWhitelist, |
| in int[] uids); |
| |
| /** |
| * Enables or disables data saver mode on costly network interfaces. |
| * |
| * - When disabled, all packets to/from apps in the penalty box chain are rejected on costly |
| * interfaces. Traffic to/from other apps or on other network interfaces is allowed. |
| * - When enabled, only apps that are in the happy box chain and not in the penalty box chain |
| * are allowed network connectivity on costly interfaces. All other packets on these |
| * interfaces are rejected. The happy box chain always contains all system UIDs; to disallow |
| * traffic from system UIDs, place them in the penalty box chain. |
| * |
| * By default, data saver mode is disabled. This command has no effect but might still return an |
| * error) if {@code enable} is the same as the current value. |
| * |
| * @param enable whether to enable or disable data saver mode. |
| * @return true if the if the operation was successful, false otherwise. |
| */ |
| boolean bandwidthEnableDataSaver(boolean enable); |
| |
| /** |
| * Creates a physical network (i.e., one containing physical interfaces. |
| * |
| * @param netId the networkId to create. |
| * @param permission the permission necessary to use the network. Must be one of |
| * PERMISSION_NONE/PERMISSION_NETWORK/PERMISSION_SYSTEM. |
| * |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * unix errno. |
| */ |
| void networkCreatePhysical(int netId, int permission); |
| |
| /** |
| * Creates a VPN network. |
| * |
| * @param netId the network to create. |
| * @param secure whether unprivileged apps are allowed to bypass the VPN. |
| * |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * unix errno. |
| */ |
| void networkCreateVpn(int netId, boolean secure); |
| |
| /** |
| * Destroys a network. Any interfaces added to the network are removed, and the network ceases |
| * to be the default network. |
| * |
| * @param netId the network to destroy. |
| * |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * unix errno. |
| */ |
| void networkDestroy(int netId); |
| |
| /** |
| * Adds an interface to a network. The interface must not be assigned to any network, including |
| * the specified network. |
| * |
| * @param netId the network to add the interface to. |
| * @param interface the name of the interface to add. |
| * |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * unix errno. |
| */ |
| void networkAddInterface(int netId, in @utf8InCpp String iface); |
| |
| /** |
| * Adds an interface to a network. The interface must be assigned to the specified network. |
| * |
| * @param netId the network to remove the interface from. |
| * @param interface the name of the interface to remove. |
| * |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * unix errno. |
| */ |
| void networkRemoveInterface(int netId, in @utf8InCpp String iface); |
| |
| /** |
| * Adds the specified UID ranges to the specified network. The network must be a VPN. Traffic |
| * from the UID ranges will be routed through the VPN. |
| * |
| * @param netId the network ID of the network to add the ranges to. |
| * @param uidRanges a set of non-overlapping, contiguous ranges of UIDs to add. The ranges |
| * must not overlap with existing ranges routed to this network. |
| * |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * unix errno. |
| */ |
| void networkAddUidRanges(int netId, in UidRangeParcel[] uidRanges); |
| |
| /** |
| * Adds the specified UID ranges to the specified network. The network must be a VPN. Traffic |
| * from the UID ranges will no longer be routed through the VPN. |
| * |
| * @param netId the network ID of the network to remove the ranges from. |
| * @param uidRanges a set of non-overlapping, contiguous ranges of UIDs to add. The ranges |
| * must already be routed to this network. |
| * |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * unix errno. |
| */ |
| void networkRemoveUidRanges(int netId, in UidRangeParcel[] uidRanges); |
| |
| /** |
| * Adds or removes one rule for each supplied UID range to prohibit all network activity outside |
| * of secure VPN. |
| * |
| * When a UID is covered by one of these rules, traffic sent through any socket that is not |
| * protected or explicitly overriden by the system will be rejected. The kernel will respond |
| * with an ICMP prohibit message. |
| * |
| * Initially, there are no such rules. Any rules that are added will only last until the next |
| * restart of netd or the device. |
| * |
| * @param add {@code true} if the specified UID ranges should be denied access to any network |
| * which is not secure VPN by adding rules, {@code false} to remove existing rules. |
| * @param uidRanges a set of non-overlapping, contiguous ranges of UIDs to which to apply or |
| * remove this restriction. |
| * <p> Added rules should not overlap with existing rules. Likewise, removed rules should |
| * each correspond to an existing rule. |
| * |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * unix errno. |
| */ |
| void networkRejectNonSecureVpn(boolean add, in UidRangeParcel[] uidRanges); |
| |
| /** |
| * Administratively closes sockets belonging to the specified UIDs. |
| */ |
| void socketDestroy(in UidRangeParcel[] uidRanges, in int[] exemptUids); |
| |
| // Array indices for resolver parameters. |
| const int RESOLVER_PARAMS_SAMPLE_VALIDITY = 0; |
| const int RESOLVER_PARAMS_SUCCESS_THRESHOLD = 1; |
| const int RESOLVER_PARAMS_MIN_SAMPLES = 2; |
| const int RESOLVER_PARAMS_MAX_SAMPLES = 3; |
| const int RESOLVER_PARAMS_BASE_TIMEOUT_MSEC = 4; |
| const int RESOLVER_PARAMS_COUNT = 5; |
| |
| /** |
| * Sets the name servers, search domains and resolver params for the given network. Flushes the |
| * cache as needed (i.e. when the servers or the number of samples to store changes). |
| * |
| * @param netId the network ID of the network for which information should be configured. |
| * @param servers the DNS servers to configure for the network. |
| * @param domains the search domains to configure. |
| * @param params the params to set. This array contains RESOLVER_PARAMS_COUNT integers that |
| * encode the contents of Bionic's __res_params struct, i.e. sample_validity is stored at |
| * position RESOLVER_PARAMS_SAMPLE_VALIDITY, etc. |
| * @param tlsName The TLS subject name to require for all servers, or empty if there is none. |
| * @param tlsServers the DNS servers to configure for strict mode Private DNS. |
| * @param tlsFingerprints An array containing TLS public key fingerprints (pins) of which each |
| * server must match at least one, or empty if there are no pinned keys. |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * unix errno. |
| */ |
| void setResolverConfiguration(int netId, in @utf8InCpp String[] servers, |
| in @utf8InCpp String[] domains, in int[] params, |
| in @utf8InCpp String tlsName, in @utf8InCpp String[] tlsServers, |
| in @utf8InCpp String[] tlsFingerprints); |
| |
| // Array indices for resolver stats. |
| const int RESOLVER_STATS_SUCCESSES = 0; |
| const int RESOLVER_STATS_ERRORS = 1; |
| const int RESOLVER_STATS_TIMEOUTS = 2; |
| const int RESOLVER_STATS_INTERNAL_ERRORS = 3; |
| const int RESOLVER_STATS_RTT_AVG = 4; |
| const int RESOLVER_STATS_LAST_SAMPLE_TIME = 5; |
| const int RESOLVER_STATS_USABLE = 6; |
| const int RESOLVER_STATS_COUNT = 7; |
| |
| /** |
| * Retrieves the name servers, search domains and resolver stats associated with the given |
| * network ID. |
| * |
| * @param netId the network ID of the network for which information should be retrieved. |
| * @param servers the DNS servers that are currently configured for the network. |
| * @param domains the search domains currently configured. |
| * @param tlsServers the DNS-over-TLS servers that are currently configured for the network. |
| * @param params the resolver parameters configured, i.e. the contents of __res_params in order. |
| * @param stats the stats for each server in the order specified by RESOLVER_STATS_XXX |
| * constants, serialized as an int array. The contents of this array are the number of |
| * <ul> |
| * <li> successes, |
| * <li> errors, |
| * <li> timeouts, |
| * <li> internal errors, |
| * <li> the RTT average, |
| * <li> the time of the last recorded sample, |
| * <li> and an integer indicating whether the server is usable (1) or broken (0). |
| * </ul> |
| * in this order. For example, the timeout counter for server N is stored at position |
| * RESOLVER_STATS_COUNT*N + RESOLVER_STATS_TIMEOUTS |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * unix errno. |
| * |
| * TODO: Consider replacing stats and params with parcelables. |
| */ |
| void getResolverInfo(int netId, out @utf8InCpp String[] servers, |
| out @utf8InCpp String[] domains, out @utf8InCpp String[] tlsServers, out int[] params, |
| out int[] stats); |
| |
| /** |
| * Instruct the tethering DNS server to reevaluated serving interfaces. |
| * This is needed to for the DNS server to observe changes in the set |
| * of potential listening IP addresses. (Listening on wildcard addresses |
| * can turn the device into an open resolver; b/7530468) |
| * |
| * TODO: Return something richer than just a boolean. |
| */ |
| boolean tetherApplyDnsInterfaces(); |
| |
| /** |
| * Return tethering statistics. |
| * |
| * @return an array of TetherStatsParcel, where each entry contains the upstream interface |
| * name and its tethering statistics. |
| * There will only ever be one entry for a given interface. |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| TetherStatsParcel[] tetherGetStats(); |
| |
| /** |
| * Add/Remove and IP address from an interface. |
| * |
| * @param ifName the interface name |
| * @param addrString the IP address to add/remove as a string literal |
| * @param prefixLength the prefix length associated with this IP address |
| * |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * unix errno. |
| */ |
| void interfaceAddAddress(in @utf8InCpp String ifName, in @utf8InCpp String addrString, |
| int prefixLength); |
| void interfaceDelAddress(in @utf8InCpp String ifName, in @utf8InCpp String addrString, |
| int prefixLength); |
| |
| /** |
| * Set and get /proc/sys/net interface configuration parameters. |
| * |
| * @param ipversion One of IPV4/IPV6 integers, indicating the desired IP version directory. |
| * @param which One of CONF/NEIGH integers, indicating the desired parameter category directory. |
| * @param ifname The interface name portion of the path; may also be "all" or "default". |
| * @param parameter The parameter name portion of the path. |
| * @param value The value string to be written into the assembled path. |
| * |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * unix errno. |
| */ |
| |
| const int IPV4 = 4; |
| const int IPV6 = 6; |
| const int CONF = 1; |
| const int NEIGH = 2; |
| @utf8InCpp String getProcSysNet(int ipversion, int which, in @utf8InCpp String ifname, |
| in @utf8InCpp String parameter); |
| void setProcSysNet(int ipversion, int which, in @utf8InCpp String ifname, |
| in @utf8InCpp String parameter, in @utf8InCpp String value); |
| |
| /** |
| * Get/Set metrics reporting level. |
| * |
| * Reporting level is one of: |
| * 0 (NONE) |
| * 1 (METRICS) |
| * 2 (FULL) |
| */ |
| int getMetricsReportingLevel(); |
| void setMetricsReportingLevel(int level); |
| |
| /** |
| * Sets owner of socket ParcelFileDescriptor to the new UID, checking to ensure that the caller's |
| * uid is that of the old owner's, and that this is a UDP-encap socket |
| * |
| * @param ParcelFileDescriptor socket Socket file descriptor |
| * @param int newUid UID of the new socket fd owner |
| */ |
| void ipSecSetEncapSocketOwner(in ParcelFileDescriptor socket, int newUid); |
| |
| /** |
| * Reserve an SPI from the kernel |
| * |
| * @param transformId a unique identifier for allocated resources |
| * @param sourceAddress InetAddress as string for the sending endpoint |
| * @param destinationAddress InetAddress as string for the receiving endpoint |
| * @param spi a requested 32-bit unique ID or 0 to request random allocation |
| * @return the SPI that was allocated or 0 if failed |
| */ |
| int ipSecAllocateSpi( |
| int transformId, |
| in @utf8InCpp String sourceAddress, |
| in @utf8InCpp String destinationAddress, |
| int spi); |
| |
| /** |
| * Create an IpSec Security Association describing how ip(v6) traffic will be encrypted |
| * or decrypted. |
| * |
| * @param transformId a unique identifier for allocated resources |
| * @param mode either Transport or Tunnel mode |
| * @param sourceAddress InetAddress as string for the sending endpoint |
| * @param destinationAddress InetAddress as string for the receiving endpoint |
| * @param underlyingNetId the netId of the network to which the SA is applied. Only accepted for |
| * tunnel mode SAs. |
| * @param spi a 32-bit unique ID allocated to the user |
| * @param markValue a 32-bit unique ID chosen by the user |
| * @param markMask a 32-bit mask chosen by the user |
| * @param authAlgo a string identifying the authentication algorithm to be used |
| * @param authKey a byte array containing the authentication key |
| * @param authTruncBits the truncation length of the MAC produced by the authentication algorithm |
| * @param cryptAlgo a string identifying the encryption algorithm to be used |
| * @param cryptKey a byte arrray containing the encryption key |
| * @param cryptTruncBits unused parameter |
| * @param aeadAlgo a string identifying the authenticated encryption algorithm to be used |
| * @param aeadKey a byte arrray containing the key to be used in authenticated encryption |
| * @param aeadIcvBits the truncation length of the ICV produced by the authentication algorithm |
| * (similar to authTruncBits in function) |
| * @param encapType encapsulation type used (if any) for the udp encap socket |
| * @param encapLocalPort the port number on the host to be used in encap packets |
| * @param encapRemotePort the port number of the remote to be used for encap packets |
| * @param interfaceId the identifier for the IPsec tunnel interface. |
| * Only accepted for tunnel mode SAs. |
| */ |
| void ipSecAddSecurityAssociation( |
| int transformId, |
| int mode, |
| in @utf8InCpp String sourceAddress, |
| in @utf8InCpp String destinationAddress, |
| int underlyingNetId, |
| int spi, |
| int markValue, |
| int markMask, |
| in @utf8InCpp String authAlgo, in byte[] authKey, in int authTruncBits, |
| in @utf8InCpp String cryptAlgo, in byte[] cryptKey, in int cryptTruncBits, |
| in @utf8InCpp String aeadAlgo, in byte[] aeadKey, in int aeadIcvBits, |
| int encapType, |
| int encapLocalPort, |
| int encapRemotePort, |
| int interfaceId); |
| |
| /** |
| * Delete a previously created security association identified by the provided parameters |
| * |
| * @param transformId a unique identifier for allocated resources |
| * @param sourceAddress InetAddress as string for the sending endpoint |
| * @param destinationAddress InetAddress as string for the receiving endpoint |
| * @param spi a requested 32-bit unique ID allocated to the user |
| * @param markValue a 32-bit unique ID chosen by the user |
| * @param markMask a 32-bit mask chosen by the user |
| * @param interfaceId the identifier for the IPsec tunnel interface. |
| */ |
| void ipSecDeleteSecurityAssociation( |
| int transformId, |
| in @utf8InCpp String sourceAddress, |
| in @utf8InCpp String destinationAddress, |
| int spi, |
| int markValue, |
| int markMask, |
| int interfaceId); |
| |
| /** |
| * Apply a previously created SA to a specified socket, starting IPsec on that socket |
| * |
| * @param socket a user-provided socket that will have IPsec applied |
| * @param transformId a unique identifier for allocated resources |
| * @param direction DIRECTION_IN or DIRECTION_OUT |
| * @param sourceAddress InetAddress as string for the sending endpoint |
| * @param destinationAddress InetAddress as string for the receiving endpoint |
| * @param spi a 32-bit unique ID allocated to the user (socket owner) |
| */ |
| void ipSecApplyTransportModeTransform( |
| in ParcelFileDescriptor socket, |
| int transformId, |
| int direction, |
| in @utf8InCpp String sourceAddress, |
| in @utf8InCpp String destinationAddress, |
| int spi); |
| |
| /** |
| * Remove an IPsec SA from a given socket. This will allow unencrypted traffic to flow |
| * on that socket if a transform had been previously applied. |
| * |
| * @param socket a user-provided socket from which to remove any IPsec configuration |
| */ |
| void ipSecRemoveTransportModeTransform( |
| in ParcelFileDescriptor socket); |
| |
| /** |
| * Adds an IPsec global policy. |
| * |
| * @param transformId a unique identifier for allocated resources |
| * @param selAddrFamily the address family identifier for the selector |
| * @param direction DIRECTION_IN or DIRECTION_OUT |
| * @param tmplSrcAddress InetAddress as string for the sending endpoint |
| * @param tmplDstAddress InetAddress as string for the receiving endpoint |
| * @param spi a 32-bit unique ID allocated to the user |
| * @param markValue a 32-bit unique ID chosen by the user |
| * @param markMask a 32-bit mask chosen by the user |
| * @param interfaceId the identifier for the IPsec tunnel interface. |
| */ |
| void ipSecAddSecurityPolicy( |
| int transformId, |
| int selAddrFamily, |
| int direction, |
| in @utf8InCpp String tmplSrcAddress, |
| in @utf8InCpp String tmplDstAddress, |
| int spi, |
| int markValue, |
| int markMask, |
| int interfaceId); |
| |
| /** |
| * Updates an IPsec global policy. |
| * |
| * @param transformId a unique identifier for allocated resources |
| * @param selAddrFamily the address family identifier for the selector |
| * @param direction DIRECTION_IN or DIRECTION_OUT |
| * @param tmplSrcAddress InetAddress as string for the sending endpoint |
| * @param tmplDstAddress InetAddress as string for the receiving endpoint |
| * @param spi a 32-bit unique ID allocated to the user |
| * @param markValue a 32-bit unique ID chosen by the user |
| * @param markMask a 32-bit mask chosen by the user |
| * @param interfaceId the identifier for the IPsec tunnel interface. |
| */ |
| void ipSecUpdateSecurityPolicy( |
| int transformId, |
| int selAddrFamily, |
| int direction, |
| in @utf8InCpp String tmplSrcAddress, |
| in @utf8InCpp String tmplDstAddress, |
| int spi, |
| int markValue, |
| int markMask, |
| int interfaceId); |
| |
| /** |
| * Deletes an IPsec global policy. |
| * |
| * Deletion of global policies does not do any matching based on the templates, thus |
| * template source/destination addresses are not needed (as opposed to add/update). |
| * |
| * @param transformId a unique identifier for allocated resources |
| * @param selAddrFamily the address family identifier for the selector |
| * @param direction DIRECTION_IN or DIRECTION_OUT |
| * @param markValue a 32-bit unique ID chosen by the user |
| * @param markMask a 32-bit mask chosen by the user |
| * @param interfaceId the identifier for the IPsec tunnel interface. |
| */ |
| void ipSecDeleteSecurityPolicy( |
| int transformId, |
| int selAddrFamily, |
| int direction, |
| int markValue, |
| int markMask, |
| int interfaceId); |
| |
| // This could not be declared as @uft8InCpp; thus, when used in native code it must be |
| // converted from a UTF-16 string to an ASCII string. |
| const String IPSEC_INTERFACE_PREFIX = "ipsec"; |
| |
| /** |
| * Add a IPsec Tunnel Interface. |
| * |
| * @param devName a unique identifier that represents the name of the device |
| * @param localAddress InetAddress as string for the local endpoint |
| * @param remoteAddress InetAddress as string for the remote endpoint |
| * @param iKey, to match Policies and SAs for input packets. |
| * @param oKey, to match Policies and SAs for output packets. |
| * @param interfaceId the identifier for the IPsec tunnel interface. |
| */ |
| void ipSecAddTunnelInterface( |
| in @utf8InCpp String deviceName, |
| in @utf8InCpp String localAddress, |
| in @utf8InCpp String remoteAddress, |
| int iKey, |
| int oKey, |
| int interfaceId); |
| |
| /** |
| * Update a IPsec Tunnel Interface. |
| * |
| * @param devName a unique identifier that represents the name of the device |
| * @param localAddress InetAddress as string for the local endpoint |
| * @param remoteAddress InetAddress as string for the remote endpoint |
| * @param iKey, to match Policies and SAs for input packets. |
| * @param oKey, to match Policies and SAs for output packets. |
| * @param interfaceId the identifier for the IPsec tunnel interface. |
| */ |
| void ipSecUpdateTunnelInterface( |
| in @utf8InCpp String deviceName, |
| in @utf8InCpp String localAddress, |
| in @utf8InCpp String remoteAddress, |
| int iKey, |
| int oKey, |
| int interfaceId); |
| |
| /** |
| * Removes a IPsec Tunnel Interface. |
| * |
| * @param devName a unique identifier that represents the name of the device |
| */ |
| void ipSecRemoveTunnelInterface(in @utf8InCpp String deviceName); |
| |
| /** |
| * Request notification of wakeup packets arriving on an interface. Notifications will be |
| * delivered to INetdEventListener.onWakeupEvent(). |
| * |
| * @param ifName the interface |
| * @param prefix arbitrary string used to identify wakeup sources in onWakeupEvent |
| */ |
| void wakeupAddInterface(in @utf8InCpp String ifName, in @utf8InCpp String prefix, int mark, int mask); |
| |
| /** |
| * Stop notification of wakeup packets arriving on an interface. |
| * |
| * @param ifName the interface |
| * @param prefix arbitrary string used to identify wakeup sources in onWakeupEvent |
| */ |
| void wakeupDelInterface(in @utf8InCpp String ifName, in @utf8InCpp String prefix, int mark, int mask); |
| |
| const int IPV6_ADDR_GEN_MODE_EUI64 = 0; |
| const int IPV6_ADDR_GEN_MODE_NONE = 1; |
| const int IPV6_ADDR_GEN_MODE_STABLE_PRIVACY = 2; |
| const int IPV6_ADDR_GEN_MODE_RANDOM = 3; |
| |
| const int IPV6_ADDR_GEN_MODE_DEFAULT = 0; |
| /** |
| * Set IPv6 address generation mode. IPv6 should be disabled before changing mode. |
| * |
| * @param mode SLAAC address generation mechanism to use |
| */ |
| void setIPv6AddrGenMode(in @utf8InCpp String ifName, int mode); |
| |
| /** |
| * Query the netd service to know if the eBPF traffic stats accounting service is currently |
| * running on the device. |
| */ |
| boolean trafficCheckBpfStatsEnable(); |
| |
| /** |
| * Add idletimer for specific interface |
| * |
| * @param ifName Name of target interface |
| * @param timeout The time in seconds that will trigger idletimer |
| * @param classLabel The unique identifier for this idletimer |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void idletimerAddInterface( |
| in @utf8InCpp String ifName, |
| int timeout, |
| in @utf8InCpp String classLabel); |
| |
| /** |
| * Remove idletimer for specific interface |
| * |
| * @param ifName Name of target interface |
| * @param timeout The time in seconds that will trigger idletimer |
| * @param classLabel The unique identifier for this idletimer |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void idletimerRemoveInterface( |
| in @utf8InCpp String ifName, |
| int timeout, |
| in @utf8InCpp String classLabel); |
| |
| const int PENALTY_POLICY_ACCEPT = 1; |
| const int PENALTY_POLICY_LOG = 2; |
| const int PENALTY_POLICY_REJECT = 3; |
| |
| /** |
| * Offers to detect sockets sending data not wrapped inside a layer of SSL/TLS encryption. |
| * |
| * @param uid Uid of the app |
| * @param policyPenalty The penalty policy of the app |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void strictUidCleartextPenalty(int uid, int policyPenalty); |
| |
| /** |
| * Start clatd |
| * |
| * @param ifName interface name to start clatd |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void clatdStart(in @utf8InCpp String ifName); |
| |
| /** |
| * Stop clatd |
| * |
| * @param ifName interface name to stop clatd |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void clatdStop(in @utf8InCpp String ifName); |
| |
| /** |
| * Get status of IP forwarding |
| * |
| * @return true if IP forwarding is enabled, false otherwise. |
| */ |
| boolean ipfwdEnabled(); |
| |
| /** |
| * Enable IP forwarding for specific requester |
| * |
| * @param requester requester name to enable IP forwarding. It is a unique name which will be |
| * stored in Netd to make sure if any requester needs IP forwarding. |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void ipfwdEnableForwarding(in @utf8InCpp String requester); |
| |
| /** |
| * Disable IP forwarding for specific requester |
| * |
| * @param requester requester name to disable IP forwarding. This name should match the |
| * names which are set by ipfwdEnableForwarding. |
| * IP forwarding would be disabled if it is the last requester. |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void ipfwdDisableForwarding(in @utf8InCpp String requester); |
| |
| /** |
| * Add forwarding ip rule |
| * |
| * @param fromIface interface name to add forwarding ip rule |
| * @param toIface interface name to add forwarding ip rule |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void ipfwdAddInterfaceForward(in @utf8InCpp String fromIface, in @utf8InCpp String toIface); |
| |
| /** |
| * Remove forwarding ip rule |
| * |
| * @param fromIface interface name to remove forwarding ip rule |
| * @param toIface interface name to remove forwarding ip rule |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void ipfwdRemoveInterfaceForward(in @utf8InCpp String fromIface, in @utf8InCpp String toIface); |
| |
| /** |
| * Set quota for interface |
| * |
| * @param ifName Name of target interface |
| * @param bytes Quota value in bytes |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void bandwidthSetInterfaceQuota(in @utf8InCpp String ifName, long bytes); |
| |
| /** |
| * Remove quota for interface |
| * |
| * @param ifName Name of target interface |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void bandwidthRemoveInterfaceQuota(in @utf8InCpp String ifName); |
| |
| /** |
| * Set alert for interface |
| * |
| * @param ifName Name of target interface |
| * @param bytes Alert value in bytes |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void bandwidthSetInterfaceAlert(in @utf8InCpp String ifName, long bytes); |
| |
| /** |
| * Remove alert for interface |
| * |
| * @param ifName Name of target interface |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void bandwidthRemoveInterfaceAlert(in @utf8InCpp String ifName); |
| |
| /** |
| * Set global alert |
| * |
| * @param bytes Alert value in bytes |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void bandwidthSetGlobalAlert(long bytes); |
| |
| /** |
| * Add naughty app bandwidth rule for specific app |
| * |
| * @param uid uid of target app |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void bandwidthAddNaughtyApp(int uid); |
| |
| /** |
| * Remove naughty app bandwidth rule for specific app |
| * |
| * @param uid uid of target app |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void bandwidthRemoveNaughtyApp(int uid); |
| |
| /** |
| * Add nice app bandwidth rule for specific app |
| * |
| * @param uid uid of target app |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void bandwidthAddNiceApp(int uid); |
| |
| /** |
| * Remove nice app bandwidth rule for specific app |
| * |
| * @param uid uid of target app |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void bandwidthRemoveNiceApp(int uid); |
| |
| /** |
| * Start tethering |
| * |
| * @param dhcpRanges dhcp ranges to set. |
| * dhcpRanges might contain many addresss {addr1, addr2, aadr3, addr4...} |
| * Netd splits them into ranges: addr1-addr2, addr3-addr4, etc. |
| * An odd number of addrs will fail. |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void tetherStart(in @utf8InCpp String[] dhcpRanges); |
| |
| /** |
| * Stop tethering |
| * |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void tetherStop(); |
| |
| /** |
| * Get status of tethering |
| * |
| * @return true if tethering is enabled, false otherwise. |
| */ |
| boolean tetherIsEnabled(); |
| |
| /** |
| * Setup interface for tethering |
| * |
| * @param ifName interface name to add |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void tetherInterfaceAdd(in @utf8InCpp String ifName); |
| |
| /** |
| * Reset interface for tethering |
| * |
| * @param ifName interface name to remove |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void tetherInterfaceRemove(in @utf8InCpp String ifName); |
| |
| /** |
| * Get the interface list which is stored in netd |
| * The list contains the interfaces managed by tetherInterfaceAdd/tetherInterfaceRemove |
| * |
| * @return An array of strings containing interface list result |
| */ |
| @utf8InCpp String[] tetherInterfaceList(); |
| |
| /** |
| * Set DNS forwarder server |
| * |
| * @param netId the upstream network to forward DNS queries to |
| * @param dnsAddrs DNS server address to set |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void tetherDnsSet(int netId, in @utf8InCpp String[] dnsAddrs); |
| |
| /** |
| * Return the DNS list set by tetherDnsSet |
| * |
| * @return An array of strings containing the list of DNS servers |
| */ |
| @utf8InCpp String[] tetherDnsList(); |
| |
| const int LOCAL_NET_ID = 99; |
| |
| // Route does not specify a next hop |
| const String NEXTHOP_NONE = ""; |
| // Route next hop is unreachable |
| const String NEXTHOP_UNREACHABLE = "unreachable"; |
| // Route next hop is throw |
| const String NEXTHOP_THROW = "throw"; |
| |
| /** |
| * Add a route for specific network |
| * |
| * @param netId the network to add the route to |
| * @param ifName the name of interface of the route. |
| * This interface should be assigned to the netID. |
| * @param destination the destination of the route |
| * @param nextHop The route's next hop address, |
| * or it could be either NEXTHOP_NONE, NEXTHOP_UNREACHABLE, NEXTHOP_THROW. |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void networkAddRoute( |
| int netId, |
| in @utf8InCpp String ifName, |
| in @utf8InCpp String destination, |
| in @utf8InCpp String nextHop); |
| |
| /** |
| * Remove a route for specific network |
| * |
| * @param netId the network to remove the route from |
| * @param ifName the name of interface of the route. |
| * This interface should be assigned to the netID. |
| * @param destination the destination of the route |
| * @param nextHop The route's next hop address, |
| * or it could be either NEXTHOP_NONE, NEXTHOP_UNREACHABLE, NEXTHOP_THROW. |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void networkRemoveRoute( |
| int netId, |
| in @utf8InCpp String ifName, |
| in @utf8InCpp String destination, |
| in @utf8InCpp String nextHop); |
| |
| /** |
| * Add a route to legacy routing table for specific network |
| * |
| * @param netId the network to add the route to |
| * @param ifName the name of interface of the route. |
| * This interface should be assigned to the netID. |
| * @param destination the destination of the route |
| * @param nextHop The route's next hop address, |
| * or it could be either NEXTHOP_NONE, NEXTHOP_UNREACHABLE, NEXTHOP_THROW. |
| * @param uid uid of the user |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void networkAddLegacyRoute( |
| int netId, |
| in @utf8InCpp String ifName, |
| in @utf8InCpp String destination, |
| in @utf8InCpp String nextHop, |
| int uid); |
| |
| /** |
| * Remove a route from legacy routing table for specific network |
| * |
| * @param netId the network to remove the route from |
| * @param ifName the name of interface of the route. |
| * This interface should be assigned to the netID. |
| * @param destination the destination of the route |
| * @param nextHop The route's next hop address, |
| * or it could be either NEXTHOP_NONE, NEXTHOP_UNREACHABLE, NEXTHOP_THROW. |
| * @param uid uid of the user |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void networkRemoveLegacyRoute( |
| int netId, |
| in @utf8InCpp String ifName, |
| in @utf8InCpp String destination, |
| in @utf8InCpp String nextHop, |
| int uid); |
| |
| /** |
| * Get default network |
| * |
| * @return netId of default network |
| */ |
| int networkGetDefault(); |
| |
| /** |
| * Set network as default network |
| * |
| * @param netId the network to set as the default |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void networkSetDefault(int netId); |
| |
| /** |
| * Clear default network |
| * |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void networkClearDefault(); |
| |
| /** |
| * PERMISSION_NONE is used for regular networks and apps |
| */ |
| const int PERMISSION_NONE = 0; |
| /** |
| * PERMISSION_NETWORK indicates that the network is only accessible |
| * to apps that have the CHANGE_NETWORK_STATE permission. |
| */ |
| const int PERMISSION_NETWORK = 1; |
| /** |
| * PERMISSION_SYSTEM is used for system UIDs and apps |
| * that have the CONNECTIVITY_USE_RESTRICTED_NETWORK permission |
| */ |
| const int PERMISSION_SYSTEM = 2; |
| |
| /** |
| * Sets the permission required to access a specific network. |
| * |
| * @param netId the network to set |
| * @param permission network permission to use |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void networkSetPermissionForNetwork(int netId, int permission); |
| |
| /** |
| * Assigns network access permissions to the specified users. |
| * |
| * @param permission network permission to use |
| * @param uids uid of users to set permission |
| */ |
| void networkSetPermissionForUser(int permission, in int[] uids); |
| |
| /** |
| * Clears network access permissions for the specified users. |
| * |
| * @param uids uid of users to clear permission |
| */ |
| void networkClearPermissionForUser(in int[] uids); |
| |
| /** |
| * Gives the specified user permission to protect sockets from VPNs. |
| * Typically used by VPN apps themselves, to ensure that the sockets |
| * they use to communicate with the VPN server aren't routed through |
| * the VPN network. |
| * |
| * @param uid uid of user to set |
| */ |
| void networkSetProtectAllow(int uid); |
| |
| /** |
| * Removes the permission to protect sockets from VPN. |
| * |
| * @param uid uid of user to set |
| */ |
| void networkSetProtectDeny(int uid); |
| |
| /** |
| * Get the status of network protect for user |
| * |
| * @param uids uid of user |
| * @return true if the user can protect sockets from VPN, false otherwise. |
| */ |
| boolean networkCanProtect(int uid); |
| |
| // Whitelist only allows packets from specific UID/Interface |
| const int FIREWALL_WHITELIST = 0; |
| // Blacklist blocks packets from specific UID/Interface |
| const int FIREWALL_BLACKLIST = 1; |
| |
| /** |
| * Set type of firewall |
| * Type whitelist only allows packets from specific UID/Interface |
| * Type blacklist blocks packets from specific UID/Interface |
| * |
| * @param firewalltype type of firewall, either FIREWALL_WHITELIST or FIREWALL_BLACKLIST |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void firewallSetFirewallType(int firewalltype); |
| |
| // Specify allow Rule which allows packets |
| const int FIREWALL_RULE_ALLOW = 1; |
| // Specify deny Rule which drops packets |
| const int FIREWALL_RULE_DENY = 2; |
| |
| // No specific chain is chosen, use general firewall chain(fw_input, fw_output) |
| const int FIREWALL_CHAIN_NONE = 0; |
| // Specify DOZABLE chain(fw_dozable) which is used in dozable mode |
| const int FIREWALL_CHAIN_DOZABLE = 1; |
| // Specify STANDBY chain(fw_standby) which is used in standby mode |
| const int FIREWALL_CHAIN_STANDBY = 2; |
| // Specify POWERSAVE chain(fw_powersave) which is used in power save mode |
| const int FIREWALL_CHAIN_POWERSAVE = 3; |
| |
| /** |
| * Set firewall rule for interface |
| * |
| * @param ifName the interface to allow/deny |
| * @param firewallRule either FIREWALL_RULE_ALLOW or FIREWALL_RULE_DENY |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void firewallSetInterfaceRule(in @utf8InCpp String ifName, int firewallRule); |
| |
| /** |
| * Set firewall rule for uid |
| * |
| * @param childChain target chain |
| * @param uid uid to allow/deny |
| * @param firewallRule either FIREWALL_RULE_ALLOW or FIREWALL_RULE_DENY |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void firewallSetUidRule(int childChain, int uid, int firewallRule); |
| |
| /** |
| * Enable/Disable target firewall child chain |
| * |
| * @param childChain target chain to enable |
| * @param enable whether to enable or disable child chain. |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void firewallEnableChildChain(int childChain, boolean enable); |
| |
| /** |
| * Get interface list |
| * |
| * @return An array of strings containing all the interfaces on the system. |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * unix errno. |
| */ |
| @utf8InCpp String[] interfaceGetList(); |
| |
| const String IF_STATE_UP = "up"; |
| const String IF_STATE_DOWN = "down"; |
| const String IF_FLAG_BROADCAST = "broadcast"; |
| const String IF_FLAG_LOOPBACK = "loopback"; |
| const String IF_FLAG_POINTOPOINT = "point-to-point"; |
| const String IF_FLAG_RUNNING = "running"; |
| const String IF_FLAG_MULTICAST = "multicast"; |
| |
| /** |
| * Get interface configuration |
| * |
| * @param ifName interface name |
| * @return An InterfaceConfigurationParcel for the specified interface. |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * unix errno. |
| */ |
| InterfaceConfigurationParcel interfaceGetCfg(in @utf8InCpp String ifName); |
| |
| /** |
| * Set interface configuration |
| * |
| * @param cfg Interface configuration to set |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * unix errno. |
| */ |
| void interfaceSetCfg(in InterfaceConfigurationParcel cfg); |
| |
| /** |
| * Set interface IPv6 privacy extensions |
| * |
| * @param ifName interface name |
| * @param enable whether to enable or disable this setting. |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void interfaceSetIPv6PrivacyExtensions(in @utf8InCpp String ifName, boolean enable); |
| |
| /** |
| * Clear all IP addresses on the given interface |
| * |
| * @param ifName interface name |
| * @throws ServiceSpecificException in case of failure, with an error code corresponding to the |
| * POSIX errno. |
| */ |
| void interfaceClearAddrs(in @utf8InCpp String ifName); |
| |
| /** |
| * Enable or disable IPv6 on the given interface |
| * |
| * @param ifName interface name |
| * @param enable whether to enable or disable this setting. |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void interfaceSetEnableIPv6(in @utf8InCpp String ifName, boolean enable); |
| |
| /** |
| * Set interface MTU |
| * |
| * @param ifName interface name |
| * @param mtu MTU value |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void interfaceSetMtu(in @utf8InCpp String ifName, int mtu); |
| |
| /** |
| * Add forwarding rule/stats on given interface. |
| * |
| * @param intIface downstream interface |
| * @param extIface upstream interface |
| */ |
| void tetherAddForward(in @utf8InCpp String intIface, in @utf8InCpp String extIface); |
| |
| /** |
| * Remove forwarding rule/stats on given interface. |
| * |
| * @param intIface downstream interface |
| * @param extIface upstream interface |
| */ |
| void tetherRemoveForward(in @utf8InCpp String intIface, in @utf8InCpp String extIface); |
| |
| /** |
| * Set the values of tcp_{rmem,wmem}. |
| * |
| * @param rmemValues the target values of tcp_rmem, each value is separated by spaces |
| * @param wmemValues the target values of tcp_wmem, each value is separated by spaces |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| */ |
| void setTcpRWmemorySize(in @utf8InCpp String rmemValues, in @utf8InCpp String wmemValues); |
| |
| /** |
| * Get NAT64 prefix in format Pref64::/n which is described in RFC6147 section 2. This |
| * interface is used for internal test only. Don't use it for other purposes because doing so |
| * would cause race conditions with the NAT64 prefix notifications. |
| * |
| * @param netId the network ID of the network to get the prefix |
| * @return the NAT64 prefix if the query operation was successful |
| * @throws ServiceSpecificException in case of failure, with an error code indicating the |
| * cause of the the failure. |
| * |
| * TODO: Remove this once the tests have been updated to listen for onNat64PrefixEvent. |
| */ |
| @utf8InCpp String getPrefix64(int netId); |
| } |
