merge in nyc-release history after reset to nyc-dev
diff --git a/camera/docs/docs.html b/camera/docs/docs.html
index 7bb6181..bacc566 100644
--- a/camera/docs/docs.html
+++ b/camera/docs/docs.html
@@ -23507,7 +23507,7 @@
<td class="entry_type">
<span class="entry_type_name">byte</span>
- <span class="entry_type_visibility"> [public as lensShadingMap]</span>
+ <span class="entry_type_visibility"> [java_public as lensShadingMap]</span>
<span class="entry_type_hwlevel">[full] </span>
@@ -23539,10 +23539,21 @@
</tr>
<tr class="entry_cont">
<td class="entry_details" colspan="5">
- <p>The least shaded section of the image should have a gain factor
-of 1; all other sections should have gains above 1.<wbr/></p>
+ <p>The map provided here is the same map that is used by the camera device to
+correct both color shading and vignetting for output non-RAW images.<wbr/></p>
+<p>When there is no lens shading correction applied to RAW
+output images (<a href="#static_android.sensor.info.lensShadingApplied">android.<wbr/>sensor.<wbr/>info.<wbr/>lens<wbr/>Shading<wbr/>Applied</a> <code>==</code>
+false),<wbr/> this map is the complete lens shading correction
+map; when there is some lens shading correction applied to
+the RAW output image (<a href="#static_android.sensor.info.lensShadingApplied">android.<wbr/>sensor.<wbr/>info.<wbr/>lens<wbr/>Shading<wbr/>Applied</a><code>==</code> true),<wbr/> this map reports the remaining lens shading
+correction map that needs to be applied to get shading
+corrected images that match the camera device's output for
+non-RAW formats.<wbr/></p>
+<p>For a complete shading correction map,<wbr/> the least shaded
+section of the image will have a gain factor of 1; all
+other sections will have gains above 1.<wbr/></p>
<p>When <a href="#controls_android.colorCorrection.mode">android.<wbr/>color<wbr/>Correction.<wbr/>mode</a> = TRANSFORM_<wbr/>MATRIX,<wbr/> the map
-must take into account the colorCorrection settings.<wbr/></p>
+will take into account the colorCorrection settings.<wbr/></p>
<p>The shading map is for the entire active pixel array,<wbr/> and is not
affected by the crop region specified in the request.<wbr/> Each shading map
entry is the value of the shading compensation map over a specific
@@ -23554,8 +23565,8 @@
<p>The channel order is [R,<wbr/> Geven,<wbr/> Godd,<wbr/> B],<wbr/> where Geven is the green
channel for the even rows of a Bayer pattern,<wbr/> and Godd is the odd rows.<wbr/>
The shading map is stored in a fully interleaved format.<wbr/></p>
-<p>The shading map should have on the order of 30-40 rows and columns,<wbr/>
-and must be smaller than 64x64.<wbr/></p>
+<p>The shading map will generally have on the order of 30-40 rows and columns,<wbr/>
+and will be smaller than 64x64.<wbr/></p>
<p>As an example,<wbr/> given a very small map defined as:</p>
<pre><code>width,<wbr/>height = [ 4,<wbr/> 3 ]
values =
@@ -23628,20 +23639,21 @@
</tr>
<tr class="entry_cont">
<td class="entry_details" colspan="5">
- <p>The lens shading correction is defined as a full shading correction that
-corrects both color shading for the output non-RAW images.<wbr/> After the
-shading map is applied,<wbr/> the output non-RAW images will be flat-field images
-for flat scenes under uniform illumination.<wbr/></p>
-<p>When there is no lens shading correction applied to RAW output images
-(<a href="#static_android.sensor.info.lensShadingApplied">android.<wbr/>sensor.<wbr/>info.<wbr/>lens<wbr/>Shading<wbr/>Applied</a> <code>==</code> false),<wbr/> this map is a full lens
-shading correction map; when there is some lens shading correction applied
-to the RAW output image (<a href="#static_android.sensor.info.lensShadingApplied">android.<wbr/>sensor.<wbr/>info.<wbr/>lens<wbr/>Shading<wbr/>Applied</a> <code>==</code> true),<wbr/>
-this map reports the remaining lens shading correction map that needs to be
-applied to get fully shading corrected images.<wbr/></p>
-<p>For a full shading correction map,<wbr/> the least shaded section of the image
-should have a gain factor of 1; all other sections should have gains above 1.<wbr/></p>
+ <p>The map provided here is the same map that is used by the camera device to
+correct both color shading and vignetting for output non-RAW images.<wbr/></p>
+<p>When there is no lens shading correction applied to RAW
+output images (<a href="#static_android.sensor.info.lensShadingApplied">android.<wbr/>sensor.<wbr/>info.<wbr/>lens<wbr/>Shading<wbr/>Applied</a> <code>==</code>
+false),<wbr/> this map is the complete lens shading correction
+map; when there is some lens shading correction applied to
+the RAW output image (<a href="#static_android.sensor.info.lensShadingApplied">android.<wbr/>sensor.<wbr/>info.<wbr/>lens<wbr/>Shading<wbr/>Applied</a><code>==</code> true),<wbr/> this map reports the remaining lens shading
+correction map that needs to be applied to get shading
+corrected images that match the camera device's output for
+non-RAW formats.<wbr/></p>
+<p>For a complete shading correction map,<wbr/> the least shaded
+section of the image will have a gain factor of 1; all
+other sections will have gains above 1.<wbr/></p>
<p>When <a href="#controls_android.colorCorrection.mode">android.<wbr/>color<wbr/>Correction.<wbr/>mode</a> = TRANSFORM_<wbr/>MATRIX,<wbr/> the map
-must take into account the colorCorrection settings.<wbr/></p>
+will take into account the colorCorrection settings.<wbr/></p>
<p>The shading map is for the entire active pixel array,<wbr/> and is not
affected by the crop region specified in the request.<wbr/> Each shading map
entry is the value of the shading compensation map over a specific
@@ -23654,8 +23666,8 @@
channel for the even rows of a Bayer pattern,<wbr/> and Godd is the odd rows.<wbr/>
The shading map is stored in a fully interleaved format,<wbr/> and its size
is provided in the camera static metadata by <a href="#static_android.lens.info.shadingMapSize">android.<wbr/>lens.<wbr/>info.<wbr/>shading<wbr/>Map<wbr/>Size</a>.<wbr/></p>
-<p>The shading map should have on the order of 30-40 rows and columns,<wbr/>
-and must be smaller than 64x64.<wbr/></p>
+<p>The shading map will generally have on the order of 30-40 rows and columns,<wbr/>
+and will be smaller than 64x64.<wbr/></p>
<p>As an example,<wbr/> given a very small map defined as:</p>
<pre><code><a href="#static_android.lens.info.shadingMapSize">android.<wbr/>lens.<wbr/>info.<wbr/>shading<wbr/>Map<wbr/>Size</a> = [ 4,<wbr/> 3 ]
<a href="#dynamic_android.statistics.lensShadingMap">android.<wbr/>statistics.<wbr/>lens<wbr/>Shading<wbr/>Map</a> =
diff --git a/camera/docs/metadata-generate b/camera/docs/metadata-generate
index a013eaf..0e4dfc2 100755
--- a/camera/docs/metadata-generate
+++ b/camera/docs/metadata-generate
@@ -61,8 +61,14 @@
local in="$1"
local out="$2"
local intermediates="$3"
+ local ndk="$4"
+ local spec_file=$thisdir/metadata_properties.xml
- python $thisdir/metadata_parser_xml.py $thisdir/metadata_properties.xml $in $out
+ if [[ "$ndk" == "yes" ]]; then
+ spec_file=$thisdir/ndk_metadata_properties.xml
+ fi
+
+ python $thisdir/metadata_parser_xml.py $spec_file $in $out
local succ=$?
@@ -197,7 +203,7 @@
gen_file camera_metadata_tags.mako ../include/system/camera_metadata_tags.h || exit 1
#Generate NDK header
-gen_file_abs ndk_camera_metadata_tags.mako "$ndk_header_dir/NdkCameraMetadataTags.h" || exit 1
+gen_file_abs ndk_camera_metadata_tags.mako "$ndk_header_dir/NdkCameraMetadataTags.h" yes yes || exit 1
# Generate Java API definitions
mkdir -p "${outdir}"
diff --git a/camera/docs/metadata_helpers.py b/camera/docs/metadata_helpers.py
index 3ebaf26..a501524 100644
--- a/camera/docs/metadata_helpers.py
+++ b/camera/docs/metadata_helpers.py
@@ -34,6 +34,7 @@
# Prepend this path to each <img src="foo"> in javadocs
JAVADOC_IMAGE_SRC_METADATA="../../../../" + IMAGE_SRC_METADATA
+NDKDOC_IMAGE_SRC_METADATA="../" + IMAGE_SRC_METADATA
_context_buf = None
@@ -903,7 +904,7 @@
"""
def ndkdoc_formatter(text):
# render with markdown => HTML
- ndktext = md(text, JAVADOC_IMAGE_SRC_METADATA)
+ ndktext = md(text, NDKDOC_IMAGE_SRC_METADATA, False)
# Convert metadata entry "android.x.y.z" to form
# NDK tag format of "ACAMERA_X_Y_Z"
@@ -968,7 +969,7 @@
return text
-def md(text, img_src_prefix=""):
+def md(text, img_src_prefix="", table_ext=True):
"""
Run text through markdown to produce HTML.
@@ -1012,7 +1013,7 @@
text = dedent(text)
# full list of extensions at http://pythonhosted.org/Markdown/extensions/
- md_extensions = ['tables'] # make <table> with ASCII |_| tables
+ md_extensions = ['tables'] if table_ext else []# make <table> with ASCII |_| tables
# render with markdown
text = markdown.markdown(text, md_extensions)
diff --git a/camera/docs/metadata_properties.xml b/camera/docs/metadata_properties.xml
index 8071bec..e7f4a5b 100644
--- a/camera/docs/metadata_properties.xml
+++ b/camera/docs/metadata_properties.xml
@@ -7618,17 +7618,32 @@
</entry>
<clone entry="android.statistics.sharpnessMapMode"
kind="controls"></clone>
- <entry name="lensShadingCorrectionMap" type="byte" visibility="public"
+ <entry name="lensShadingCorrectionMap" type="byte" visibility="java_public"
typedef="lensShadingMap" hwlevel="full">
<description>The shading map is a low-resolution floating-point map
that lists the coefficients used to correct for vignetting, for each
Bayer color channel.</description>
<range>Each gain factor is &gt;= 1</range>
- <details>The least shaded section of the image should have a gain factor
- of 1; all other sections should have gains above 1.
+ <details>
+ The map provided here is the same map that is used by the camera device to
+ correct both color shading and vignetting for output non-RAW images.
+
+ When there is no lens shading correction applied to RAW
+ output images (android.sensor.info.lensShadingApplied `==`
+ false), this map is the complete lens shading correction
+ map; when there is some lens shading correction applied to
+ the RAW output image (android.sensor.info.lensShadingApplied
+ `==` true), this map reports the remaining lens shading
+ correction map that needs to be applied to get shading
+ corrected images that match the camera device's output for
+ non-RAW formats.
+
+ For a complete shading correction map, the least shaded
+ section of the image will have a gain factor of 1; all
+ other sections will have gains above 1.
When android.colorCorrection.mode = TRANSFORM_MATRIX, the map
- must take into account the colorCorrection settings.
+ will take into account the colorCorrection settings.
The shading map is for the entire active pixel array, and is not
affected by the crop region specified in the request. Each shading map
@@ -7643,8 +7658,8 @@
channel for the even rows of a Bayer pattern, and Godd is the odd rows.
The shading map is stored in a fully interleaved format.
- The shading map should have on the order of 30-40 rows and columns,
- and must be smaller than 64x64.
+ The shading map will generally have on the order of 30-40 rows and columns,
+ and will be smaller than 64x64.
As an example, given a very small map defined as:
@@ -7684,23 +7699,25 @@
for each Bayer color channel of RAW image data.</description>
<range>Each gain factor is &gt;= 1</range>
<details>
- The lens shading correction is defined as a full shading correction that
- corrects both color shading for the output non-RAW images. After the
- shading map is applied, the output non-RAW images will be flat-field images
- for flat scenes under uniform illumination.
+ The map provided here is the same map that is used by the camera device to
+ correct both color shading and vignetting for output non-RAW images.
- When there is no lens shading correction applied to RAW output images
- (android.sensor.info.lensShadingApplied `==` false), this map is a full lens
- shading correction map; when there is some lens shading correction applied
- to the RAW output image (android.sensor.info.lensShadingApplied `==` true),
- this map reports the remaining lens shading correction map that needs to be
- applied to get fully shading corrected images.
+ When there is no lens shading correction applied to RAW
+ output images (android.sensor.info.lensShadingApplied `==`
+ false), this map is the complete lens shading correction
+ map; when there is some lens shading correction applied to
+ the RAW output image (android.sensor.info.lensShadingApplied
+ `==` true), this map reports the remaining lens shading
+ correction map that needs to be applied to get shading
+ corrected images that match the camera device's output for
+ non-RAW formats.
- For a full shading correction map, the least shaded section of the image
- should have a gain factor of 1; all other sections should have gains above 1.
+ For a complete shading correction map, the least shaded
+ section of the image will have a gain factor of 1; all
+ other sections will have gains above 1.
When android.colorCorrection.mode = TRANSFORM_MATRIX, the map
- must take into account the colorCorrection settings.
+ will take into account the colorCorrection settings.
The shading map is for the entire active pixel array, and is not
affected by the crop region specified in the request. Each shading map
@@ -7716,8 +7733,8 @@
The shading map is stored in a fully interleaved format, and its size
is provided in the camera static metadata by android.lens.info.shadingMapSize.
- The shading map should have on the order of 30-40 rows and columns,
- and must be smaller than 64x64.
+ The shading map will generally have on the order of 30-40 rows and columns,
+ and will be smaller than 64x64.
As an example, given a very small map defined as:
diff --git a/camera/docs/ndk_metadata_properties.xml b/camera/docs/ndk_metadata_properties.xml
new file mode 100644
index 0000000..a424c3d
--- /dev/null
+++ b/camera/docs/ndk_metadata_properties.xml
@@ -0,0 +1,8990 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2016 The Android Open Source Project
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+<metadata xmlns="http://schemas.android.com/service/camera/metadata/"
+xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+xsi:schemaLocation="http://schemas.android.com/service/camera/metadata/ metadata_properties.xsd">
+
+ <tags>
+ <tag id="BC">
+ Needed for backwards compatibility with old Java API
+ </tag>
+ <tag id="V1">
+ New features for first camera 2 release (API1)
+ </tag>
+ <tag id="RAW">
+ Needed for useful RAW image processing and DNG file support
+ </tag>
+ <tag id="HAL2">
+ Entry is only used by camera device HAL 2.x
+ </tag>
+ <tag id="FULL">
+ Entry is required for full hardware level devices, and optional for other hardware levels
+ </tag>
+ <tag id="DEPTH">
+ Entry is required for the depth capability.
+ </tag>
+ <tag id="REPROC">
+ Entry is required for the YUV or PRIVATE reprocessing capability.
+ </tag>
+ <tag id="FUTURE">
+ Entry is under-specified and is not required for now. This is for book-keeping purpose,
+ do not implement or use it, it may be revised for future.
+ </tag>
+ </tags>
+
+ <types>
+ <typedef name="pairFloatFloat">
+ <language name="java">android.util.Pair<Float,Float></language>
+ </typedef>
+ <typedef name="pairDoubleDouble">
+ <language name="java">android.util.Pair<Double,Double></language>
+ </typedef>
+ <typedef name="rectangle">
+ <language name="java">android.graphics.Rect</language>
+ </typedef>
+ <typedef name="size">
+ <language name="java">android.util.Size</language>
+ </typedef>
+ <typedef name="string">
+ <language name="java">String</language>
+ </typedef>
+ <typedef name="boolean">
+ <language name="java">boolean</language>
+ </typedef>
+ <typedef name="imageFormat">
+ <language name="java">int</language>
+ </typedef>
+ <typedef name="streamConfigurationMap">
+ <language name="java">android.hardware.camera2.params.StreamConfigurationMap</language>
+ </typedef>
+ <typedef name="streamConfiguration">
+ <language name="java">android.hardware.camera2.params.StreamConfiguration</language>
+ </typedef>
+ <typedef name="streamConfigurationDuration">
+ <language name="java">android.hardware.camera2.params.StreamConfigurationDuration</language>
+ </typedef>
+ <typedef name="face">
+ <language name="java">android.hardware.camera2.params.Face</language>
+ </typedef>
+ <typedef name="meteringRectangle">
+ <language name="java">android.hardware.camera2.params.MeteringRectangle</language>
+ </typedef>
+ <typedef name="rangeFloat">
+ <language name="java">android.util.Range<Float></language>
+ </typedef>
+ <typedef name="rangeInt">
+ <language name="java">android.util.Range<Integer></language>
+ </typedef>
+ <typedef name="rangeLong">
+ <language name="java">android.util.Range<Long></language>
+ </typedef>
+ <typedef name="colorSpaceTransform">
+ <language name="java">android.hardware.camera2.params.ColorSpaceTransform</language>
+ </typedef>
+ <typedef name="rggbChannelVector">
+ <language name="java">android.hardware.camera2.params.RggbChannelVector</language>
+ </typedef>
+ <typedef name="blackLevelPattern">
+ <language name="java">android.hardware.camera2.params.BlackLevelPattern</language>
+ </typedef>
+ <typedef name="enumList">
+ <language name="java">int</language>
+ </typedef>
+ <typedef name="sizeF">
+ <language name="java">android.util.SizeF</language>
+ </typedef>
+ <typedef name="point">
+ <language name="java">android.graphics.Point</language>
+ </typedef>
+ <typedef name="tonemapCurve">
+ <language name="java">android.hardware.camera2.params.TonemapCurve</language>
+ </typedef>
+ <typedef name="lensShadingMap">
+ <language name="java">android.hardware.camera2.params.LensShadingMap</language>
+ </typedef>
+ <typedef name="location">
+ <language name="java">android.location.Location</language>
+ </typedef>
+ <typedef name="highSpeedVideoConfiguration">
+ <language name="java">android.hardware.camera2.params.HighSpeedVideoConfiguration</language>
+ </typedef>
+ <typedef name="reprocessFormatsMap">
+ <language name="java">android.hardware.camera2.params.ReprocessFormatsMap</language>
+ </typedef>
+ </types>
+
+ <namespace name="android">
+ <section name="colorCorrection">
+ <controls>
+ <entry name="mode" type="byte" visibility="public" enum="true" hwlevel="full">
+ <enum>
+ <value>TRANSFORM_MATRIX
+ <notes>Use the android.colorCorrection.transform matrix
+ and android.colorCorrection.gains to do color conversion.
+
+ All advanced white balance adjustments (not specified
+ by our white balance pipeline) must be disabled.
+
+ If AWB is enabled with `android.control.awbMode != OFF`, then
+ TRANSFORM_MATRIX is ignored. The camera device will override
+ this value to either FAST or HIGH_QUALITY.
+ </notes>
+ </value>
+ <value>FAST
+ <notes>Color correction processing must not slow down
+ capture rate relative to sensor raw output.
+
+ Advanced white balance adjustments above and beyond
+ the specified white balance pipeline may be applied.
+
+ If AWB is enabled with `android.control.awbMode != OFF`, then
+ the camera device uses the last frame's AWB values
+ (or defaults if AWB has never been run).
+ </notes>
+ </value>
+ <value>HIGH_QUALITY
+ <notes>Color correction processing operates at improved
+ quality but the capture rate might be reduced (relative to sensor
+ raw output rate)
+
+ Advanced white balance adjustments above and beyond
+ the specified white balance pipeline may be applied.
+
+ If AWB is enabled with `android.control.awbMode != OFF`, then
+ the camera device uses the last frame's AWB values
+ (or defaults if AWB has never been run).
+ </notes>
+ </value>
+ </enum>
+
+ <description>
+ The mode control selects how the image data is converted from the
+ sensor's native color into linear sRGB color.
+ </description>
+ <details>
+ When auto-white balance (AWB) is enabled with android.control.awbMode, this
+ control is overridden by the AWB routine. When AWB is disabled, the
+ application controls how the color mapping is performed.
+
+ We define the expected processing pipeline below. For consistency
+ across devices, this is always the case with TRANSFORM_MATRIX.
+
+ When either FULL or HIGH_QUALITY is used, the camera device may
+ do additional processing but android.colorCorrection.gains and
+ android.colorCorrection.transform will still be provided by the
+ camera device (in the results) and be roughly correct.
+
+ Switching to TRANSFORM_MATRIX and using the data provided from
+ FAST or HIGH_QUALITY will yield a picture with the same white point
+ as what was produced by the camera device in the earlier frame.
+
+ The expected processing pipeline is as follows:
+
+ 
+
+ The white balance is encoded by two values, a 4-channel white-balance
+ gain vector (applied in the Bayer domain), and a 3x3 color transform
+ matrix (applied after demosaic).
+
+ The 4-channel white-balance gains are defined as:
+
+ android.colorCorrection.gains = [ R G_even G_odd B ]
+
+ where `G_even` is the gain for green pixels on even rows of the
+ output, and `G_odd` is the gain for green pixels on the odd rows.
+ These may be identical for a given camera device implementation; if
+ the camera device does not support a separate gain for even/odd green
+ channels, it will use the `G_even` value, and write `G_odd` equal to
+ `G_even` in the output result metadata.
+
+ The matrices for color transforms are defined as a 9-entry vector:
+
+ android.colorCorrection.transform = [ I0 I1 I2 I3 I4 I5 I6 I7 I8 ]
+
+ which define a transform from input sensor colors, `P_in = [ r g b ]`,
+ to output linear sRGB, `P_out = [ r' g' b' ]`,
+
+ with colors as follows:
+
+ r' = I0r + I1g + I2b
+ g' = I3r + I4g + I5b
+ b' = I6r + I7g + I8b
+
+ Both the input and output value ranges must match. Overflow/underflow
+ values are clipped to fit within the range.
+ </details>
+ <hal_details>
+ HAL must support both FAST and HIGH_QUALITY if color correction control is available
+ on the camera device, but the underlying implementation can be the same for both modes.
+ That is, if the highest quality implementation on the camera device does not slow down
+ capture rate, then FAST and HIGH_QUALITY should generate the same output.
+ </hal_details>
+ </entry>
+ <entry name="transform" type="rational" visibility="public"
+ type_notes="3x3 rational matrix in row-major order"
+ container="array" typedef="colorSpaceTransform" hwlevel="full">
+ <array>
+ <size>3</size>
+ <size>3</size>
+ </array>
+ <description>A color transform matrix to use to transform
+ from sensor RGB color space to output linear sRGB color space.
+ </description>
+ <units>Unitless scale factors</units>
+ <details>This matrix is either set by the camera device when the request
+ android.colorCorrection.mode is not TRANSFORM_MATRIX, or
+ directly by the application in the request when the
+ android.colorCorrection.mode is TRANSFORM_MATRIX.
+
+ In the latter case, the camera device may round the matrix to account
+ for precision issues; the final rounded matrix should be reported back
+ in this matrix result metadata. The transform should keep the magnitude
+ of the output color values within `[0, 1.0]` (assuming input color
+ values is within the normalized range `[0, 1.0]`), or clipping may occur.
+
+ The valid range of each matrix element varies on different devices, but
+ values within [-1.5, 3.0] are guaranteed not to be clipped.
+ </details>
+ </entry>
+ <entry name="gains" type="float" visibility="public"
+ type_notes="A 1D array of floats for 4 color channel gains"
+ container="array" typedef="rggbChannelVector" hwlevel="full">
+ <array>
+ <size>4</size>
+ </array>
+ <description>Gains applying to Bayer raw color channels for
+ white-balance.</description>
+ <units>Unitless gain factors</units>
+ <details>
+ These per-channel gains are either set by the camera device
+ when the request android.colorCorrection.mode is not
+ TRANSFORM_MATRIX, or directly by the application in the
+ request when the android.colorCorrection.mode is
+ TRANSFORM_MATRIX.
+
+ The gains in the result metadata are the gains actually
+ applied by the camera device to the current frame.
+
+ The valid range of gains varies on different devices, but gains
+ between [1.0, 3.0] are guaranteed not to be clipped. Even if a given
+ device allows gains below 1.0, this is usually not recommended because
+ this can create color artifacts.
+ </details>
+ <hal_details>
+ The 4-channel white-balance gains are defined in
+ the order of `[R G_even G_odd B]`, where `G_even` is the gain
+ for green pixels on even rows of the output, and `G_odd`
+ is the gain for green pixels on the odd rows.
+
+ If a HAL does not support a separate gain for even/odd green
+ channels, it must use the `G_even` value, and write
+ `G_odd` equal to `G_even` in the output result metadata.
+ </hal_details>
+ </entry>
+ <entry name="aberrationMode" type="byte" visibility="public" enum="true" hwlevel="legacy">
+ <enum>
+ <value>OFF
+ <notes>
+ No aberration correction is applied.
+ </notes>
+ </value>
+ <value>FAST
+ <notes>
+ Aberration correction will not slow down capture rate
+ relative to sensor raw output.
+ </notes>
+ </value>
+ <value>HIGH_QUALITY
+ <notes>
+ Aberration correction operates at improved quality but the capture rate might be
+ reduced (relative to sensor raw output rate)
+ </notes>
+ </value>
+ </enum>
+ <description>
+ Mode of operation for the chromatic aberration correction algorithm.
+ </description>
+ <range>android.colorCorrection.availableAberrationModes</range>
+ <details>
+ Chromatic (color) aberration is caused by the fact that different wavelengths of light
+ can not focus on the same point after exiting from the lens. This metadata defines
+ the high level control of chromatic aberration correction algorithm, which aims to
+ minimize the chromatic artifacts that may occur along the object boundaries in an
+ image.
+
+ FAST/HIGH_QUALITY both mean that camera device determined aberration
+ correction will be applied. HIGH_QUALITY mode indicates that the camera device will
+ use the highest-quality aberration correction algorithms, even if it slows down
+ capture rate. FAST means the camera device will not slow down capture rate when
+ applying aberration correction.
+
+ LEGACY devices will always be in FAST mode.
+ </details>
+ </entry>
+ </controls>
+ <dynamic>
+ <clone entry="android.colorCorrection.mode" kind="controls">
+ </clone>
+ <clone entry="android.colorCorrection.transform" kind="controls">
+ </clone>
+ <clone entry="android.colorCorrection.gains" kind="controls">
+ </clone>
+ <clone entry="android.colorCorrection.aberrationMode" kind="controls">
+ </clone>
+ </dynamic>
+ <static>
+ <entry name="availableAberrationModes" type="byte" visibility="public"
+ type_notes="list of enums" container="array" typedef="enumList" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of aberration correction modes for android.colorCorrection.aberrationMode that are
+ supported by this camera device.
+ </description>
+ <range>Any value listed in android.colorCorrection.aberrationMode</range>
+ <details>
+ This key lists the valid modes for android.colorCorrection.aberrationMode. If no
+ aberration correction modes are available for a device, this list will solely include
+ OFF mode. All camera devices will support either OFF or FAST mode.
+
+ Camera devices that support the MANUAL_POST_PROCESSING capability will always list
+ OFF mode. This includes all FULL level devices.
+
+ LEGACY devices will always only support FAST mode.
+ </details>
+ <hal_details>
+ HAL must support both FAST and HIGH_QUALITY if chromatic aberration control is available
+ on the camera device, but the underlying implementation can be the same for both modes.
+ That is, if the highest quality implementation on the camera device does not slow down
+ capture rate, then FAST and HIGH_QUALITY will generate the same output.
+ </hal_details>
+ <tag id="V1" />
+ </entry>
+ </static>
+ </section>
+ <section name="control">
+ <controls>
+ <entry name="aeAntibandingMode" type="byte" visibility="public"
+ enum="true" hwlevel="legacy">
+ <enum>
+ <value>OFF
+ <notes>
+ The camera device will not adjust exposure duration to
+ avoid banding problems.
+ </notes>
+ </value>
+ <value>50HZ
+ <notes>
+ The camera device will adjust exposure duration to
+ avoid banding problems with 50Hz illumination sources.
+ </notes>
+ </value>
+ <value>60HZ
+ <notes>
+ The camera device will adjust exposure duration to
+ avoid banding problems with 60Hz illumination
+ sources.
+ </notes>
+ </value>
+ <value>AUTO
+ <notes>
+ The camera device will automatically adapt its
+ antibanding routine to the current illumination
+ condition. This is the default mode if AUTO is
+ available on given camera device.
+ </notes>
+ </value>
+ </enum>
+ <description>
+ The desired setting for the camera device's auto-exposure
+ algorithm's antibanding compensation.
+ </description>
+ <range>
+ android.control.aeAvailableAntibandingModes
+ </range>
+ <details>
+ Some kinds of lighting fixtures, such as some fluorescent
+ lights, flicker at the rate of the power supply frequency
+ (60Hz or 50Hz, depending on country). While this is
+ typically not noticeable to a person, it can be visible to
+ a camera device. If a camera sets its exposure time to the
+ wrong value, the flicker may become visible in the
+ viewfinder as flicker or in a final captured image, as a
+ set of variable-brightness bands across the image.
+
+ Therefore, the auto-exposure routines of camera devices
+ include antibanding routines that ensure that the chosen
+ exposure value will not cause such banding. The choice of
+ exposure time depends on the rate of flicker, which the
+ camera device can detect automatically, or the expected
+ rate can be selected by the application using this
+ control.
+
+ A given camera device may not support all of the possible
+ options for the antibanding mode. The
+ android.control.aeAvailableAntibandingModes key contains
+ the available modes for a given camera device.
+
+ AUTO mode is the default if it is available on given
+ camera device. When AUTO mode is not available, the
+ default will be either 50HZ or 60HZ, and both 50HZ
+ and 60HZ will be available.
+
+ If manual exposure control is enabled (by setting
+ android.control.aeMode or android.control.mode to OFF),
+ then this setting has no effect, and the application must
+ ensure it selects exposure times that do not cause banding
+ issues. The android.statistics.sceneFlicker key can assist
+ the application in this.
+ </details>
+ <hal_details>
+ For all capture request templates, this field must be set
+ to AUTO if AUTO mode is available. If AUTO is not available,
+ the default must be either 50HZ or 60HZ, and both 50HZ and
+ 60HZ must be available.
+
+ If manual exposure control is enabled (by setting
+ android.control.aeMode or android.control.mode to OFF),
+ then the exposure values provided by the application must not be
+ adjusted for antibanding.
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ <entry name="aeExposureCompensation" type="int32" visibility="public" hwlevel="legacy">
+ <description>Adjustment to auto-exposure (AE) target image
+ brightness.</description>
+ <units>Compensation steps</units>
+ <range>android.control.aeCompensationRange</range>
+ <details>
+ The adjustment is measured as a count of steps, with the
+ step size defined by android.control.aeCompensationStep and the
+ allowed range by android.control.aeCompensationRange.
+
+ For example, if the exposure value (EV) step is 0.333, '6'
+ will mean an exposure compensation of +2 EV; -3 will mean an
+ exposure compensation of -1 EV. One EV represents a doubling
+ of image brightness. Note that this control will only be
+ effective if android.control.aeMode `!=` OFF. This control
+ will take effect even when android.control.aeLock `== true`.
+
+ In the event of exposure compensation value being changed, camera device
+ may take several frames to reach the newly requested exposure target.
+ During that time, android.control.aeState field will be in the SEARCHING
+ state. Once the new exposure target is reached, android.control.aeState will
+ change from SEARCHING to either CONVERGED, LOCKED (if AE lock is enabled), or
+ FLASH_REQUIRED (if the scene is too dark for still capture).
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="aeLock" type="byte" visibility="public" enum="true"
+ typedef="boolean" hwlevel="legacy">
+ <enum>
+ <value>OFF
+ <notes>Auto-exposure lock is disabled; the AE algorithm
+ is free to update its parameters.</notes></value>
+ <value>ON
+ <notes>Auto-exposure lock is enabled; the AE algorithm
+ must not update the exposure and sensitivity parameters
+ while the lock is active.
+
+ android.control.aeExposureCompensation setting changes
+ will still take effect while auto-exposure is locked.
+
+ Some rare LEGACY devices may not support
+ this, in which case the value will always be overridden to OFF.
+ </notes></value>
+ </enum>
+ <description>Whether auto-exposure (AE) is currently locked to its latest
+ calculated values.</description>
+ <details>
+ When set to `true` (ON), the AE algorithm is locked to its latest parameters,
+ and will not change exposure settings until the lock is set to `false` (OFF).
+
+ Note that even when AE is locked, the flash may be fired if
+ the android.control.aeMode is ON_AUTO_FLASH /
+ ON_ALWAYS_FLASH / ON_AUTO_FLASH_REDEYE.
+
+ When android.control.aeExposureCompensation is changed, even if the AE lock
+ is ON, the camera device will still adjust its exposure value.
+
+ If AE precapture is triggered (see android.control.aePrecaptureTrigger)
+ when AE is already locked, the camera device will not change the exposure time
+ (android.sensor.exposureTime) and sensitivity (android.sensor.sensitivity)
+ parameters. The flash may be fired if the android.control.aeMode
+ is ON_AUTO_FLASH/ON_AUTO_FLASH_REDEYE and the scene is too dark. If the
+ android.control.aeMode is ON_ALWAYS_FLASH, the scene may become overexposed.
+ Similarly, AE precapture trigger CANCEL has no effect when AE is already locked.
+
+ When an AE precapture sequence is triggered, AE unlock will not be able to unlock
+ the AE if AE is locked by the camera device internally during precapture metering
+ sequence In other words, submitting requests with AE unlock has no effect for an
+ ongoing precapture metering sequence. Otherwise, the precapture metering sequence
+ will never succeed in a sequence of preview requests where AE lock is always set
+ to `false`.
+
+ Since the camera device has a pipeline of in-flight requests, the settings that
+ get locked do not necessarily correspond to the settings that were present in the
+ latest capture result received from the camera device, since additional captures
+ and AE updates may have occurred even before the result was sent out. If an
+ application is switching between automatic and manual control and wishes to eliminate
+ any flicker during the switch, the following procedure is recommended:
+
+ 1. Starting in auto-AE mode:
+ 2. Lock AE
+ 3. Wait for the first result to be output that has the AE locked
+ 4. Copy exposure settings from that result into a request, set the request to manual AE
+ 5. Submit the capture request, proceed to run manual AE as desired.
+
+ See android.control.aeState for AE lock related state transition details.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="aeMode" type="byte" visibility="public" enum="true" hwlevel="legacy">
+ <enum>
+ <value>OFF
+ <notes>
+ The camera device's autoexposure routine is disabled.
+
+ The application-selected android.sensor.exposureTime,
+ android.sensor.sensitivity and
+ android.sensor.frameDuration are used by the camera
+ device, along with android.flash.* fields, if there's
+ a flash unit for this camera device.
+
+ Note that auto-white balance (AWB) and auto-focus (AF)
+ behavior is device dependent when AE is in OFF mode.
+ To have consistent behavior across different devices,
+ it is recommended to either set AWB and AF to OFF mode
+ or lock AWB and AF before setting AE to OFF.
+ See android.control.awbMode, android.control.afMode,
+ android.control.awbLock, and android.control.afTrigger
+ for more details.
+
+ LEGACY devices do not support the OFF mode and will
+ override attempts to use this value to ON.
+ </notes>
+ </value>
+ <value>ON
+ <notes>
+ The camera device's autoexposure routine is active,
+ with no flash control.
+
+ The application's values for
+ android.sensor.exposureTime,
+ android.sensor.sensitivity, and
+ android.sensor.frameDuration are ignored. The
+ application has control over the various
+ android.flash.* fields.
+ </notes>
+ </value>
+ <value>ON_AUTO_FLASH
+ <notes>
+ Like ON, except that the camera device also controls
+ the camera's flash unit, firing it in low-light
+ conditions.
+
+ The flash may be fired during a precapture sequence
+ (triggered by android.control.aePrecaptureTrigger) and
+ may be fired for captures for which the
+ android.control.captureIntent field is set to
+ STILL_CAPTURE
+ </notes>
+ </value>
+ <value>ON_ALWAYS_FLASH
+ <notes>
+ Like ON, except that the camera device also controls
+ the camera's flash unit, always firing it for still
+ captures.
+
+ The flash may be fired during a precapture sequence
+ (triggered by android.control.aePrecaptureTrigger) and
+ will always be fired for captures for which the
+ android.control.captureIntent field is set to
+ STILL_CAPTURE
+ </notes>
+ </value>
+ <value>ON_AUTO_FLASH_REDEYE
+ <notes>
+ Like ON_AUTO_FLASH, but with automatic red eye
+ reduction.
+
+ If deemed necessary by the camera device, a red eye
+ reduction flash will fire during the precapture
+ sequence.
+ </notes>
+ </value>
+ </enum>
+ <description>The desired mode for the camera device's
+ auto-exposure routine.</description>
+ <range>android.control.aeAvailableModes</range>
+ <details>
+ This control is only effective if android.control.mode is
+ AUTO.
+
+ When set to any of the ON modes, the camera device's
+ auto-exposure routine is enabled, overriding the
+ application's selected exposure time, sensor sensitivity,
+ and frame duration (android.sensor.exposureTime,
+ android.sensor.sensitivity, and
+ android.sensor.frameDuration). If one of the FLASH modes
+ is selected, the camera device's flash unit controls are
+ also overridden.
+
+ The FLASH modes are only available if the camera device
+ has a flash unit (android.flash.info.available is `true`).
+
+ If flash TORCH mode is desired, this field must be set to
+ ON or OFF, and android.flash.mode set to TORCH.
+
+ When set to any of the ON modes, the values chosen by the
+ camera device auto-exposure routine for the overridden
+ fields for a given capture will be available in its
+ CaptureResult.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="aeRegions" type="int32" visibility="public"
+ optional="true" container="array" typedef="meteringRectangle">
+ <array>
+ <size>5</size>
+ <size>area_count</size>
+ </array>
+ <description>List of metering areas to use for auto-exposure adjustment.</description>
+ <units>Pixel coordinates within android.sensor.info.activeArraySize</units>
+ <range>Coordinates must be between `[(0,0), (width, height))` of
+ android.sensor.info.activeArraySize</range>
+ <details>
+ Not available if android.control.maxRegionsAe is 0.
+ Otherwise will always be present.
+
+ The maximum number of regions supported by the device is determined by the value
+ of android.control.maxRegionsAe.
+
+ The data representation is int[5 * area_count].
+ Every five elements represent a metering region of (xmin, ymin, xmax, ymax, weight).
+ The rectangle is defined to be inclusive on xmin and ymin, but exclusive on xmax and
+ ymax.
+
+ The coordinate system is based on the active pixel array,
+ with (0,0) being the top-left pixel in the active pixel array, and
+ (android.sensor.info.activeArraySize.width - 1,
+ android.sensor.info.activeArraySize.height - 1) being the
+ bottom-right pixel in the active pixel array.
+
+ The weight must be within `[0, 1000]`, and represents a weight
+ for every pixel in the area. This means that a large metering area
+ with the same weight as a smaller area will have more effect in
+ the metering result. Metering areas can partially overlap and the
+ camera device will add the weights in the overlap region.
+
+ The weights are relative to weights of other exposure metering regions, so if only one
+ region is used, all non-zero weights will have the same effect. A region with 0
+ weight is ignored.
+
+ If all regions have 0 weight, then no specific metering area needs to be used by the
+ camera device.
+
+ If the metering region is outside the used android.scaler.cropRegion returned in
+ capture result metadata, the camera device will ignore the sections outside the crop
+ region and output only the intersection rectangle as the metering region in the result
+ metadata. If the region is entirely outside the crop region, it will be ignored and
+ not reported in the result metadata.
+ </details>
+ <hal_details>
+ The HAL level representation of MeteringRectangle[] is a
+ int[5 * area_count].
+ Every five elements represent a metering region of
+ (xmin, ymin, xmax, ymax, weight).
+ The rectangle is defined to be inclusive on xmin and ymin, but
+ exclusive on xmax and ymax.
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ <entry name="aeTargetFpsRange" type="int32" visibility="public"
+ container="array" typedef="rangeInt" hwlevel="legacy">
+ <array>
+ <size>2</size>
+ </array>
+ <description>Range over which the auto-exposure routine can
+ adjust the capture frame rate to maintain good
+ exposure.</description>
+ <units>Frames per second (FPS)</units>
+ <range>Any of the entries in android.control.aeAvailableTargetFpsRanges</range>
+ <details>Only constrains auto-exposure (AE) algorithm, not
+ manual control of android.sensor.exposureTime and
+ android.sensor.frameDuration.</details>
+ <tag id="BC" />
+ </entry>
+ <entry name="aePrecaptureTrigger" type="byte" visibility="public"
+ enum="true" hwlevel="limited">
+ <enum>
+ <value>IDLE
+ <notes>The trigger is idle.</notes>
+ </value>
+ <value>START
+ <notes>The precapture metering sequence will be started
+ by the camera device.
+
+ The exact effect of the precapture trigger depends on
+ the current AE mode and state.</notes>
+ </value>
+ <value>CANCEL
+ <notes>The camera device will cancel any currently active or completed
+ precapture metering sequence, the auto-exposure routine will return to its
+ initial state.</notes>
+ </value>
+ </enum>
+ <description>Whether the camera device will trigger a precapture
+ metering sequence when it processes this request.</description>
+ <details>This entry is normally set to IDLE, or is not
+ included at all in the request settings. When included and
+ set to START, the camera device will trigger the auto-exposure (AE)
+ precapture metering sequence.
+
+ When set to CANCEL, the camera device will cancel any active
+ precapture metering trigger, and return to its initial AE state.
+ If a precapture metering sequence is already completed, and the camera
+ device has implicitly locked the AE for subsequent still capture, the
+ CANCEL trigger will unlock the AE and return to its initial AE state.
+
+ The precapture sequence should be triggered before starting a
+ high-quality still capture for final metering decisions to
+ be made, and for firing pre-capture flash pulses to estimate
+ scene brightness and required final capture flash power, when
+ the flash is enabled.
+
+ Normally, this entry should be set to START for only a
+ single request, and the application should wait until the
+ sequence completes before starting a new one.
+
+ When a precapture metering sequence is finished, the camera device
+ may lock the auto-exposure routine internally to be able to accurately expose the
+ subsequent still capture image (`android.control.captureIntent == STILL_CAPTURE`).
+ For this case, the AE may not resume normal scan if no subsequent still capture is
+ submitted. To ensure that the AE routine restarts normal scan, the application should
+ submit a request with `android.control.aeLock == true`, followed by a request
+ with `android.control.aeLock == false`, if the application decides not to submit a
+ still capture request after the precapture sequence completes. Alternatively, for
+ API level 23 or newer devices, the CANCEL can be used to unlock the camera device
+ internally locked AE if the application doesn't submit a still capture request after
+ the AE precapture trigger. Note that, the CANCEL was added in API level 23, and must not
+ be used in devices that have earlier API levels.
+
+ The exact effect of auto-exposure (AE) precapture trigger
+ depends on the current AE mode and state; see
+ android.control.aeState for AE precapture state transition
+ details.
+
+ On LEGACY-level devices, the precapture trigger is not supported;
+ capturing a high-resolution JPEG image will automatically trigger a
+ precapture sequence before the high-resolution capture, including
+ potentially firing a pre-capture flash.
+
+ Using the precapture trigger and the auto-focus trigger android.control.afTrigger
+ simultaneously is allowed. However, since these triggers often require cooperation between
+ the auto-focus and auto-exposure routines (for example, the may need to be enabled for a
+ focus sweep), the camera device may delay acting on a later trigger until the previous
+ trigger has been fully handled. This may lead to longer intervals between the trigger and
+ changes to android.control.aeState indicating the start of the precapture sequence, for
+ example.
+
+ If both the precapture and the auto-focus trigger are activated on the same request, then
+ the camera device will complete them in the optimal order for that device.
+ </details>
+ <hal_details>
+ The HAL must support triggering the AE precapture trigger while an AF trigger is active
+ (and vice versa), or at the same time as the AF trigger. It is acceptable for the HAL to
+ treat these as two consecutive triggers, for example handling the AF trigger and then the
+ AE trigger. Or the HAL may choose to optimize the case with both triggers fired at once,
+ to minimize the latency for converging both focus and exposure/flash usage.
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ <entry name="afMode" type="byte" visibility="public" enum="true"
+ hwlevel="legacy">
+ <enum>
+ <value>OFF
+ <notes>The auto-focus routine does not control the lens;
+ android.lens.focusDistance is controlled by the
+ application.</notes></value>
+ <value>AUTO
+ <notes>Basic automatic focus mode.
+
+ In this mode, the lens does not move unless
+ the autofocus trigger action is called. When that trigger
+ is activated, AF will transition to ACTIVE_SCAN, then to
+ the outcome of the scan (FOCUSED or NOT_FOCUSED).
+
+ Always supported if lens is not fixed focus.
+
+ Use android.lens.info.minimumFocusDistance to determine if lens
+ is fixed-focus.
+
+ Triggering AF_CANCEL resets the lens position to default,
+ and sets the AF state to INACTIVE.</notes></value>
+ <value>MACRO
+ <notes>Close-up focusing mode.
+
+ In this mode, the lens does not move unless the
+ autofocus trigger action is called. When that trigger is
+ activated, AF will transition to ACTIVE_SCAN, then to
+ the outcome of the scan (FOCUSED or NOT_FOCUSED). This
+ mode is optimized for focusing on objects very close to
+ the camera.
+
+ When that trigger is activated, AF will transition to
+ ACTIVE_SCAN, then to the outcome of the scan (FOCUSED or
+ NOT_FOCUSED). Triggering cancel AF resets the lens
+ position to default, and sets the AF state to
+ INACTIVE.</notes></value>
+ <value>CONTINUOUS_VIDEO
+ <notes>In this mode, the AF algorithm modifies the lens
+ position continually to attempt to provide a
+ constantly-in-focus image stream.
+
+ The focusing behavior should be suitable for good quality
+ video recording; typically this means slower focus
+ movement and no overshoots. When the AF trigger is not
+ involved, the AF algorithm should start in INACTIVE state,
+ and then transition into PASSIVE_SCAN and PASSIVE_FOCUSED
+ states as appropriate. When the AF trigger is activated,
+ the algorithm should immediately transition into
+ AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the
+ lens position until a cancel AF trigger is received.
+
+ Once cancel is received, the algorithm should transition
+ back to INACTIVE and resume passive scan. Note that this
+ behavior is not identical to CONTINUOUS_PICTURE, since an
+ ongoing PASSIVE_SCAN must immediately be
+ canceled.</notes></value>
+ <value>CONTINUOUS_PICTURE
+ <notes>In this mode, the AF algorithm modifies the lens
+ position continually to attempt to provide a
+ constantly-in-focus image stream.
+
+ The focusing behavior should be suitable for still image
+ capture; typically this means focusing as fast as
+ possible. When the AF trigger is not involved, the AF
+ algorithm should start in INACTIVE state, and then
+ transition into PASSIVE_SCAN and PASSIVE_FOCUSED states as
+ appropriate as it attempts to maintain focus. When the AF
+ trigger is activated, the algorithm should finish its
+ PASSIVE_SCAN if active, and then transition into
+ AF_FOCUSED or AF_NOT_FOCUSED as appropriate, and lock the
+ lens position until a cancel AF trigger is received.
+
+ When the AF cancel trigger is activated, the algorithm
+ should transition back to INACTIVE and then act as if it
+ has just been started.</notes></value>
+ <value>EDOF
+ <notes>Extended depth of field (digital focus) mode.
+
+ The camera device will produce images with an extended
+ depth of field automatically; no special focusing
+ operations need to be done before taking a picture.
+
+ AF triggers are ignored, and the AF state will always be
+ INACTIVE.</notes></value>
+ </enum>
+ <description>Whether auto-focus (AF) is currently enabled, and what
+ mode it is set to.</description>
+ <range>android.control.afAvailableModes</range>
+ <details>Only effective if android.control.mode = AUTO and the lens is not fixed focus
+ (i.e. `android.lens.info.minimumFocusDistance > 0`). Also note that
+ when android.control.aeMode is OFF, the behavior of AF is device
+ dependent. It is recommended to lock AF by using android.control.afTrigger before
+ setting android.control.aeMode to OFF, or set AF mode to OFF when AE is OFF.
+
+ If the lens is controlled by the camera device auto-focus algorithm,
+ the camera device will report the current AF status in android.control.afState
+ in result metadata.</details>
+ <hal_details>
+ When afMode is AUTO or MACRO, the lens must not move until an AF trigger is sent in a
+ request (android.control.afTrigger `==` START). After an AF trigger, the afState will end
+ up with either FOCUSED_LOCKED or NOT_FOCUSED_LOCKED state (see
+ android.control.afState for detailed state transitions), which indicates that the lens is
+ locked and will not move. If camera movement (e.g. tilting camera) causes the lens to move
+ after the lens is locked, the HAL must compensate this movement appropriately such that
+ the same focal plane remains in focus.
+
+ When afMode is one of the continuous auto focus modes, the HAL is free to start a AF
+ scan whenever it's not locked. When the lens is locked after an AF trigger
+ (see android.control.afState for detailed state transitions), the HAL should maintain the
+ same lock behavior as above.
+
+ When afMode is OFF, the application controls focus manually. The accuracy of the
+ focus distance control depends on the android.lens.info.focusDistanceCalibration.
+ However, the lens must not move regardless of the camera movement for any focus distance
+ manual control.
+
+ To put this in concrete terms, if the camera has lens elements which may move based on
+ camera orientation or motion (e.g. due to gravity), then the HAL must drive the lens to
+ remain in a fixed position invariant to the camera's orientation or motion, for example,
+ by using accelerometer measurements in the lens control logic. This is a typical issue
+ that will arise on camera modules with open-loop VCMs.
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ <entry name="afRegions" type="int32" visibility="public"
+ optional="true" container="array" typedef="meteringRectangle">
+ <array>
+ <size>5</size>
+ <size>area_count</size>
+ </array>
+ <description>List of metering areas to use for auto-focus.</description>
+ <units>Pixel coordinates within android.sensor.info.activeArraySize</units>
+ <range>Coordinates must be between `[(0,0), (width, height))` of
+ android.sensor.info.activeArraySize</range>
+ <details>
+ Not available if android.control.maxRegionsAf is 0.
+ Otherwise will always be present.
+
+ The maximum number of focus areas supported by the device is determined by the value
+ of android.control.maxRegionsAf.
+
+ The data representation is int[5 * area_count].
+ Every five elements represent a metering region of (xmin, ymin, xmax, ymax, weight).
+ The rectangle is defined to be inclusive on xmin and ymin, but exclusive on xmax and
+ ymax.
+
+ The coordinate system is based on the active pixel array,
+ with (0,0) being the top-left pixel in the active pixel array, and
+ (android.sensor.info.activeArraySize.width - 1,
+ android.sensor.info.activeArraySize.height - 1) being the
+ bottom-right pixel in the active pixel array.
+
+ The weight must be within `[0, 1000]`, and represents a weight
+ for every pixel in the area. This means that a large metering area
+ with the same weight as a smaller area will have more effect in
+ the metering result. Metering areas can partially overlap and the
+ camera device will add the weights in the overlap region.
+
+ The weights are relative to weights of other metering regions, so if only one region
+ is used, all non-zero weights will have the same effect. A region with 0 weight is
+ ignored.
+
+ If all regions have 0 weight, then no specific metering area needs to be used by the
+ camera device.
+
+ If the metering region is outside the used android.scaler.cropRegion returned in
+ capture result metadata, the camera device will ignore the sections outside the crop
+ region and output only the intersection rectangle as the metering region in the result
+ metadata. If the region is entirely outside the crop region, it will be ignored and
+ not reported in the result metadata.
+ </details>
+ <hal_details>
+ The HAL level representation of MeteringRectangle[] is a
+ int[5 * area_count].
+ Every five elements represent a metering region of
+ (xmin, ymin, xmax, ymax, weight).
+ The rectangle is defined to be inclusive on xmin and ymin, but
+ exclusive on xmax and ymax.
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ <entry name="afTrigger" type="byte" visibility="public" enum="true"
+ hwlevel="legacy">
+ <enum>
+ <value>IDLE
+ <notes>The trigger is idle.</notes>
+ </value>
+ <value>START
+ <notes>Autofocus will trigger now.</notes>
+ </value>
+ <value>CANCEL
+ <notes>Autofocus will return to its initial
+ state, and cancel any currently active trigger.</notes>
+ </value>
+ </enum>
+ <description>
+ Whether the camera device will trigger autofocus for this request.
+ </description>
+ <details>This entry is normally set to IDLE, or is not
+ included at all in the request settings.
+
+ When included and set to START, the camera device will trigger the
+ autofocus algorithm. If autofocus is disabled, this trigger has no effect.
+
+ When set to CANCEL, the camera device will cancel any active trigger,
+ and return to its initial AF state.
+
+ Generally, applications should set this entry to START or CANCEL for only a
+ single capture, and then return it to IDLE (or not set at all). Specifying
+ START for multiple captures in a row means restarting the AF operation over
+ and over again.
+
+ See android.control.afState for what the trigger means for each AF mode.
+
+ Using the autofocus trigger and the precapture trigger android.control.aePrecaptureTrigger
+ simultaneously is allowed. However, since these triggers often require cooperation between
+ the auto-focus and auto-exposure routines (for example, the may need to be enabled for a
+ focus sweep), the camera device may delay acting on a later trigger until the previous
+ trigger has been fully handled. This may lead to longer intervals between the trigger and
+ changes to android.control.afState, for example.
+ </details>
+ <hal_details>
+ The HAL must support triggering the AF trigger while an AE precapture trigger is active
+ (and vice versa), or at the same time as the AE trigger. It is acceptable for the HAL to
+ treat these as two consecutive triggers, for example handling the AF trigger and then the
+ AE trigger. Or the HAL may choose to optimize the case with both triggers fired at once,
+ to minimize the latency for converging both focus and exposure/flash usage.
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ <entry name="awbLock" type="byte" visibility="public" enum="true"
+ typedef="boolean" hwlevel="legacy">
+ <enum>
+ <value>OFF
+ <notes>Auto-white balance lock is disabled; the AWB
+ algorithm is free to update its parameters if in AUTO
+ mode.</notes></value>
+ <value>ON
+ <notes>Auto-white balance lock is enabled; the AWB
+ algorithm will not update its parameters while the lock
+ is active.</notes></value>
+ </enum>
+ <description>Whether auto-white balance (AWB) is currently locked to its
+ latest calculated values.</description>
+ <details>
+ When set to `true` (ON), the AWB algorithm is locked to its latest parameters,
+ and will not change color balance settings until the lock is set to `false` (OFF).
+
+ Since the camera device has a pipeline of in-flight requests, the settings that
+ get locked do not necessarily correspond to the settings that were present in the
+ latest capture result received from the camera device, since additional captures
+ and AWB updates may have occurred even before the result was sent out. If an
+ application is switching between automatic and manual control and wishes to eliminate
+ any flicker during the switch, the following procedure is recommended:
+
+ 1. Starting in auto-AWB mode:
+ 2. Lock AWB
+ 3. Wait for the first result to be output that has the AWB locked
+ 4. Copy AWB settings from that result into a request, set the request to manual AWB
+ 5. Submit the capture request, proceed to run manual AWB as desired.
+
+ Note that AWB lock is only meaningful when
+ android.control.awbMode is in the AUTO mode; in other modes,
+ AWB is already fixed to a specific setting.
+
+ Some LEGACY devices may not support ON; the value is then overridden to OFF.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="awbMode" type="byte" visibility="public" enum="true"
+ hwlevel="legacy">
+ <enum>
+ <value>OFF
+ <notes>
+ The camera device's auto-white balance routine is disabled.
+
+ The application-selected color transform matrix
+ (android.colorCorrection.transform) and gains
+ (android.colorCorrection.gains) are used by the camera
+ device for manual white balance control.
+ </notes>
+ </value>
+ <value>AUTO
+ <notes>
+ The camera device's auto-white balance routine is active.
+
+ The application's values for android.colorCorrection.transform
+ and android.colorCorrection.gains are ignored.
+ For devices that support the MANUAL_POST_PROCESSING capability, the
+ values used by the camera device for the transform and gains
+ will be available in the capture result for this request.
+ </notes>
+ </value>
+ <value>INCANDESCENT
+ <notes>
+ The camera device's auto-white balance routine is disabled;
+ the camera device uses incandescent light as the assumed scene
+ illumination for white balance.
+
+ While the exact white balance transforms are up to the
+ camera device, they will approximately match the CIE
+ standard illuminant A.
+
+ The application's values for android.colorCorrection.transform
+ and android.colorCorrection.gains are ignored.
+ For devices that support the MANUAL_POST_PROCESSING capability, the
+ values used by the camera device for the transform and gains
+ will be available in the capture result for this request.
+ </notes>
+ </value>
+ <value>FLUORESCENT
+ <notes>
+ The camera device's auto-white balance routine is disabled;
+ the camera device uses fluorescent light as the assumed scene
+ illumination for white balance.
+
+ While the exact white balance transforms are up to the
+ camera device, they will approximately match the CIE
+ standard illuminant F2.
+
+ The application's values for android.colorCorrection.transform
+ and android.colorCorrection.gains are ignored.
+ For devices that support the MANUAL_POST_PROCESSING capability, the
+ values used by the camera device for the transform and gains
+ will be available in the capture result for this request.
+ </notes>
+ </value>
+ <value>WARM_FLUORESCENT
+ <notes>
+ The camera device's auto-white balance routine is disabled;
+ the camera device uses warm fluorescent light as the assumed scene
+ illumination for white balance.
+
+ While the exact white balance transforms are up to the
+ camera device, they will approximately match the CIE
+ standard illuminant F4.
+
+ The application's values for android.colorCorrection.transform
+ and android.colorCorrection.gains are ignored.
+ For devices that support the MANUAL_POST_PROCESSING capability, the
+ values used by the camera device for the transform and gains
+ will be available in the capture result for this request.
+ </notes>
+ </value>
+ <value>DAYLIGHT
+ <notes>
+ The camera device's auto-white balance routine is disabled;
+ the camera device uses daylight light as the assumed scene
+ illumination for white balance.
+
+ While the exact white balance transforms are up to the
+ camera device, they will approximately match the CIE
+ standard illuminant D65.
+
+ The application's values for android.colorCorrection.transform
+ and android.colorCorrection.gains are ignored.
+ For devices that support the MANUAL_POST_PROCESSING capability, the
+ values used by the camera device for the transform and gains
+ will be available in the capture result for this request.
+ </notes>
+ </value>
+ <value>CLOUDY_DAYLIGHT
+ <notes>
+ The camera device's auto-white balance routine is disabled;
+ the camera device uses cloudy daylight light as the assumed scene
+ illumination for white balance.
+
+ The application's values for android.colorCorrection.transform
+ and android.colorCorrection.gains are ignored.
+ For devices that support the MANUAL_POST_PROCESSING capability, the
+ values used by the camera device for the transform and gains
+ will be available in the capture result for this request.
+ </notes>
+ </value>
+ <value>TWILIGHT
+ <notes>
+ The camera device's auto-white balance routine is disabled;
+ the camera device uses twilight light as the assumed scene
+ illumination for white balance.
+
+ The application's values for android.colorCorrection.transform
+ and android.colorCorrection.gains are ignored.
+ For devices that support the MANUAL_POST_PROCESSING capability, the
+ values used by the camera device for the transform and gains
+ will be available in the capture result for this request.
+ </notes>
+ </value>
+ <value>SHADE
+ <notes>
+ The camera device's auto-white balance routine is disabled;
+ the camera device uses shade light as the assumed scene
+ illumination for white balance.
+
+ The application's values for android.colorCorrection.transform
+ and android.colorCorrection.gains are ignored.
+ For devices that support the MANUAL_POST_PROCESSING capability, the
+ values used by the camera device for the transform and gains
+ will be available in the capture result for this request.
+ </notes>
+ </value>
+ </enum>
+ <description>Whether auto-white balance (AWB) is currently setting the color
+ transform fields, and what its illumination target
+ is.</description>
+ <range>android.control.awbAvailableModes</range>
+ <details>
+ This control is only effective if android.control.mode is AUTO.
+
+ When set to the ON mode, the camera device's auto-white balance
+ routine is enabled, overriding the application's selected
+ android.colorCorrection.transform, android.colorCorrection.gains and
+ android.colorCorrection.mode. Note that when android.control.aeMode
+ is OFF, the behavior of AWB is device dependent. It is recommened to
+ also set AWB mode to OFF or lock AWB by using android.control.awbLock before
+ setting AE mode to OFF.
+
+ When set to the OFF mode, the camera device's auto-white balance
+ routine is disabled. The application manually controls the white
+ balance by android.colorCorrection.transform, android.colorCorrection.gains
+ and android.colorCorrection.mode.
+
+ When set to any other modes, the camera device's auto-white
+ balance routine is disabled. The camera device uses each
+ particular illumination target for white balance
+ adjustment. The application's values for
+ android.colorCorrection.transform,
+ android.colorCorrection.gains and
+ android.colorCorrection.mode are ignored.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="awbRegions" type="int32" visibility="public"
+ optional="true" container="array" typedef="meteringRectangle">
+ <array>
+ <size>5</size>
+ <size>area_count</size>
+ </array>
+ <description>List of metering areas to use for auto-white-balance illuminant
+ estimation.</description>
+ <units>Pixel coordinates within android.sensor.info.activeArraySize</units>
+ <range>Coordinates must be between `[(0,0), (width, height))` of
+ android.sensor.info.activeArraySize</range>
+ <details>
+ Not available if android.control.maxRegionsAwb is 0.
+ Otherwise will always be present.
+
+ The maximum number of regions supported by the device is determined by the value
+ of android.control.maxRegionsAwb.
+
+ The data representation is int[5 * area_count].
+ Every five elements represent a metering region of (xmin, ymin, xmax, ymax, weight).
+ The rectangle is defined to be inclusive on xmin and ymin, but exclusive on xmax and
+ ymax.
+
+ The coordinate system is based on the active pixel array,
+ with (0,0) being the top-left pixel in the active pixel array, and
+ (android.sensor.info.activeArraySize.width - 1,
+ android.sensor.info.activeArraySize.height - 1) being the
+ bottom-right pixel in the active pixel array.
+
+ The weight must range from 0 to 1000, and represents a weight
+ for every pixel in the area. This means that a large metering area
+ with the same weight as a smaller area will have more effect in
+ the metering result. Metering areas can partially overlap and the
+ camera device will add the weights in the overlap region.
+
+ The weights are relative to weights of other white balance metering regions, so if
+ only one region is used, all non-zero weights will have the same effect. A region with
+ 0 weight is ignored.
+
+ If all regions have 0 weight, then no specific metering area needs to be used by the
+ camera device.
+
+ If the metering region is outside the used android.scaler.cropRegion returned in
+ capture result metadata, the camera device will ignore the sections outside the crop
+ region and output only the intersection rectangle as the metering region in the result
+ metadata. If the region is entirely outside the crop region, it will be ignored and
+ not reported in the result metadata.
+ </details>
+ <hal_details>
+ The HAL level representation of MeteringRectangle[] is a
+ int[5 * area_count].
+ Every five elements represent a metering region of
+ (xmin, ymin, xmax, ymax, weight).
+ The rectangle is defined to be inclusive on xmin and ymin, but
+ exclusive on xmax and ymax.
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ <entry name="captureIntent" type="byte" visibility="public" enum="true"
+ hwlevel="legacy">
+ <enum>
+ <value>CUSTOM
+ <notes>The goal of this request doesn't fall into the other
+ categories. The camera device will default to preview-like
+ behavior.</notes></value>
+ <value>PREVIEW
+ <notes>This request is for a preview-like use case.
+
+ The precapture trigger may be used to start off a metering
+ w/flash sequence.
+ </notes></value>
+ <value>STILL_CAPTURE
+ <notes>This request is for a still capture-type
+ use case.
+
+ If the flash unit is under automatic control, it may fire as needed.
+ </notes></value>
+ <value>VIDEO_RECORD
+ <notes>This request is for a video recording
+ use case.</notes></value>
+ <value>VIDEO_SNAPSHOT
+ <notes>This request is for a video snapshot (still
+ image while recording video) use case.
+
+ The camera device should take the highest-quality image
+ possible (given the other settings) without disrupting the
+ frame rate of video recording. </notes></value>
+ <value>ZERO_SHUTTER_LAG
+ <notes>This request is for a ZSL usecase; the
+ application will stream full-resolution images and
+ reprocess one or several later for a final
+ capture.
+ </notes></value>
+ <value>MANUAL
+ <notes>This request is for manual capture use case where
+ the applications want to directly control the capture parameters.
+
+ For example, the application may wish to manually control
+ android.sensor.exposureTime, android.sensor.sensitivity, etc.
+ </notes></value>
+ </enum>
+ <description>Information to the camera device 3A (auto-exposure,
+ auto-focus, auto-white balance) routines about the purpose
+ of this capture, to help the camera device to decide optimal 3A
+ strategy.</description>
+ <details>This control (except for MANUAL) is only effective if
+ `android.control.mode != OFF` and any 3A routine is active.
+
+ ZERO_SHUTTER_LAG will be supported if android.request.availableCapabilities
+ contains PRIVATE_REPROCESSING or YUV_REPROCESSING. MANUAL will be supported if
+ android.request.availableCapabilities contains MANUAL_SENSOR. Other intent values are
+ always supported.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="effectMode" type="byte" visibility="public" enum="true"
+ hwlevel="legacy">
+ <enum>
+ <value>OFF
+ <notes>
+ No color effect will be applied.
+ </notes>
+ </value>
+ <value optional="true">MONO
+ <notes>
+ A "monocolor" effect where the image is mapped into
+ a single color.
+
+ This will typically be grayscale.
+ </notes>
+ </value>
+ <value optional="true">NEGATIVE
+ <notes>
+ A "photo-negative" effect where the image's colors
+ are inverted.
+ </notes>
+ </value>
+ <value optional="true">SOLARIZE
+ <notes>
+ A "solarisation" effect (Sabattier effect) where the
+ image is wholly or partially reversed in
+ tone.
+ </notes>
+ </value>
+ <value optional="true">SEPIA
+ <notes>
+ A "sepia" effect where the image is mapped into warm
+ gray, red, and brown tones.
+ </notes>
+ </value>
+ <value optional="true">POSTERIZE
+ <notes>
+ A "posterization" effect where the image uses
+ discrete regions of tone rather than a continuous
+ gradient of tones.
+ </notes>
+ </value>
+ <value optional="true">WHITEBOARD
+ <notes>
+ A "whiteboard" effect where the image is typically displayed
+ as regions of white, with black or grey details.
+ </notes>
+ </value>
+ <value optional="true">BLACKBOARD
+ <notes>
+ A "blackboard" effect where the image is typically displayed
+ as regions of black, with white or grey details.
+ </notes>
+ </value>
+ <value optional="true">AQUA
+ <notes>
+ An "aqua" effect where a blue hue is added to the image.
+ </notes>
+ </value>
+ </enum>
+ <description>A special color effect to apply.</description>
+ <range>android.control.availableEffects</range>
+ <details>
+ When this mode is set, a color effect will be applied
+ to images produced by the camera device. The interpretation
+ and implementation of these color effects is left to the
+ implementor of the camera device, and should not be
+ depended on to be consistent (or present) across all
+ devices.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="mode" type="byte" visibility="public" enum="true"
+ hwlevel="legacy">
+ <enum>
+ <value>OFF
+ <notes>Full application control of pipeline.
+
+ All control by the device's metering and focusing (3A)
+ routines is disabled, and no other settings in
+ android.control.* have any effect, except that
+ android.control.captureIntent may be used by the camera
+ device to select post-processing values for processing
+ blocks that do not allow for manual control, or are not
+ exposed by the camera API.
+
+ However, the camera device's 3A routines may continue to
+ collect statistics and update their internal state so that
+ when control is switched to AUTO mode, good control values
+ can be immediately applied.
+ </notes></value>
+ <value>AUTO
+ <notes>Use settings for each individual 3A routine.
+
+ Manual control of capture parameters is disabled. All
+ controls in android.control.* besides sceneMode take
+ effect.</notes></value>
+ <value optional="true">USE_SCENE_MODE
+ <notes>Use a specific scene mode.
+
+ Enabling this disables control.aeMode, control.awbMode and
+ control.afMode controls; the camera device will ignore
+ those settings while USE_SCENE_MODE is active (except for
+ FACE_PRIORITY scene mode). Other control entries are still active.
+ This setting can only be used if scene mode is supported (i.e.
+ android.control.availableSceneModes
+ contain some modes other than DISABLED).</notes></value>
+ <value optional="true">OFF_KEEP_STATE
+ <notes>Same as OFF mode, except that this capture will not be
+ used by camera device background auto-exposure, auto-white balance and
+ auto-focus algorithms (3A) to update their statistics.
+
+ Specifically, the 3A routines are locked to the last
+ values set from a request with AUTO, OFF, or
+ USE_SCENE_MODE, and any statistics or state updates
+ collected from manual captures with OFF_KEEP_STATE will be
+ discarded by the camera device.
+ </notes></value>
+ </enum>
+ <description>Overall mode of 3A (auto-exposure, auto-white-balance, auto-focus) control
+ routines.</description>
+ <range>android.control.availableModes</range>
+ <details>
+ This is a top-level 3A control switch. When set to OFF, all 3A control
+ by the camera device is disabled. The application must set the fields for
+ capture parameters itself.
+
+ When set to AUTO, the individual algorithm controls in
+ android.control.* are in effect, such as android.control.afMode.
+
+ When set to USE_SCENE_MODE, the individual controls in
+ android.control.* are mostly disabled, and the camera device implements
+ one of the scene mode settings (such as ACTION, SUNSET, or PARTY)
+ as it wishes. The camera device scene mode 3A settings are provided by
+ capture results {@link ACameraMetadata} from
+ {@link ACameraCaptureSession_captureCallback_result}.
+
+ When set to OFF_KEEP_STATE, it is similar to OFF mode, the only difference
+ is that this frame will not be used by camera device background 3A statistics
+ update, as if this frame is never captured. This mode can be used in the scenario
+ where the application doesn't want a 3A manual control capture to affect
+ the subsequent auto 3A capture results.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="sceneMode" type="byte" visibility="public" enum="true"
+ hwlevel="legacy">
+ <enum>
+ <value id="0">DISABLED
+ <notes>
+ Indicates that no scene modes are set for a given capture request.
+ </notes>
+ </value>
+ <value>FACE_PRIORITY
+ <notes>If face detection support exists, use face
+ detection data for auto-focus, auto-white balance, and
+ auto-exposure routines.
+
+ If face detection statistics are disabled
+ (i.e. android.statistics.faceDetectMode is set to OFF),
+ this should still operate correctly (but will not return
+ face detection statistics to the framework).
+
+ Unlike the other scene modes, android.control.aeMode,
+ android.control.awbMode, and android.control.afMode
+ remain active when FACE_PRIORITY is set.
+ </notes>
+ </value>
+ <value optional="true">ACTION
+ <notes>
+ Optimized for photos of quickly moving objects.
+
+ Similar to SPORTS.
+ </notes>
+ </value>
+ <value optional="true">PORTRAIT
+ <notes>
+ Optimized for still photos of people.
+ </notes>
+ </value>
+ <value optional="true">LANDSCAPE
+ <notes>
+ Optimized for photos of distant macroscopic objects.
+ </notes>
+ </value>
+ <value optional="true">NIGHT
+ <notes>
+ Optimized for low-light settings.
+ </notes>
+ </value>
+ <value optional="true">NIGHT_PORTRAIT
+ <notes>
+ Optimized for still photos of people in low-light
+ settings.
+ </notes>
+ </value>
+ <value optional="true">THEATRE
+ <notes>
+ Optimized for dim, indoor settings where flash must
+ remain off.
+ </notes>
+ </value>
+ <value optional="true">BEACH
+ <notes>
+ Optimized for bright, outdoor beach settings.
+ </notes>
+ </value>
+ <value optional="true">SNOW
+ <notes>
+ Optimized for bright, outdoor settings containing snow.
+ </notes>
+ </value>
+ <value optional="true">SUNSET
+ <notes>
+ Optimized for scenes of the setting sun.
+ </notes>
+ </value>
+ <value optional="true">STEADYPHOTO
+ <notes>
+ Optimized to avoid blurry photos due to small amounts of
+ device motion (for example: due to hand shake).
+ </notes>
+ </value>
+ <value optional="true">FIREWORKS
+ <notes>
+ Optimized for nighttime photos of fireworks.
+ </notes>
+ </value>
+ <value optional="true">SPORTS
+ <notes>
+ Optimized for photos of quickly moving people.
+
+ Similar to ACTION.
+ </notes>
+ </value>
+ <value optional="true">PARTY
+ <notes>
+ Optimized for dim, indoor settings with multiple moving
+ people.
+ </notes>
+ </value>
+ <value optional="true">CANDLELIGHT
+ <notes>
+ Optimized for dim settings where the main light source
+ is a flame.
+ </notes>
+ </value>
+ <value optional="true">BARCODE
+ <notes>
+ Optimized for accurately capturing a photo of barcode
+ for use by camera applications that wish to read the
+ barcode value.
+ </notes>
+ </value>
+ <value deprecated="true" optional="true" ndk_hidden="true">HIGH_SPEED_VIDEO
+ <notes>
+ This is deprecated, please use {@link
+ android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession}
+ and {@link
+ android.hardware.camera2.CameraConstrainedHighSpeedCaptureSession#createHighSpeedRequestList}
+ for high speed video recording.
+
+ Optimized for high speed video recording (frame rate >=60fps) use case.
+
+ The supported high speed video sizes and fps ranges are specified in
+ android.control.availableHighSpeedVideoConfigurations. To get desired
+ output frame rates, the application is only allowed to select video size
+ and fps range combinations listed in this static metadata. The fps range
+ can be control via android.control.aeTargetFpsRange.
+
+ In this mode, the camera device will override aeMode, awbMode, and afMode to
+ ON, ON, and CONTINUOUS_VIDEO, respectively. All post-processing block mode
+ controls will be overridden to be FAST. Therefore, no manual control of capture
+ and post-processing parameters is possible. All other controls operate the
+ same as when android.control.mode == AUTO. This means that all other
+ android.control.* fields continue to work, such as
+
+ * android.control.aeTargetFpsRange
+ * android.control.aeExposureCompensation
+ * android.control.aeLock
+ * android.control.awbLock
+ * android.control.effectMode
+ * android.control.aeRegions
+ * android.control.afRegions
+ * android.control.awbRegions
+ * android.control.afTrigger
+ * android.control.aePrecaptureTrigger
+
+ Outside of android.control.*, the following controls will work:
+
+ * android.flash.mode (automatic flash for still capture will not work since aeMode is ON)
+ * android.lens.opticalStabilizationMode (if it is supported)
+ * android.scaler.cropRegion
+ * android.statistics.faceDetectMode
+
+ For high speed recording use case, the actual maximum supported frame rate may
+ be lower than what camera can output, depending on the destination Surfaces for
+ the image data. For example, if the destination surface is from video encoder,
+ the application need check if the video encoder is capable of supporting the
+ high frame rate for a given video size, or it will end up with lower recording
+ frame rate. If the destination surface is from preview window, the preview frame
+ rate will be bounded by the screen refresh rate.
+
+ The camera device will only support up to 2 output high speed streams
+ (processed non-stalling format defined in android.request.maxNumOutputStreams)
+ in this mode. This control will be effective only if all of below conditions are true:
+
+ * The application created no more than maxNumHighSpeedStreams processed non-stalling
+ format output streams, where maxNumHighSpeedStreams is calculated as
+ min(2, android.request.maxNumOutputStreams[Processed (but not-stalling)]).
+ * The stream sizes are selected from the sizes reported by
+ android.control.availableHighSpeedVideoConfigurations.
+ * No processed non-stalling or raw streams are configured.
+
+ When above conditions are NOT satistied, the controls of this mode and
+ android.control.aeTargetFpsRange will be ignored by the camera device,
+ the camera device will fall back to android.control.mode `==` AUTO,
+ and the returned capture result metadata will give the fps range choosen
+ by the camera device.
+
+ Switching into or out of this mode may trigger some camera ISP/sensor
+ reconfigurations, which may introduce extra latency. It is recommended that
+ the application avoids unnecessary scene mode switch as much as possible.
+ </notes>
+ </value>
+ <value optional="true">HDR
+ <notes>
+ Turn on a device-specific high dynamic range (HDR) mode.
+
+ In this scene mode, the camera device captures images
+ that keep a larger range of scene illumination levels
+ visible in the final image. For example, when taking a
+ picture of a object in front of a bright window, both
+ the object and the scene through the window may be
+ visible when using HDR mode, while in normal AUTO mode,
+ one or the other may be poorly exposed. As a tradeoff,
+ HDR mode generally takes much longer to capture a single
+ image, has no user control, and may have other artifacts
+ depending on the HDR method used.
+
+ Therefore, HDR captures operate at a much slower rate
+ than regular captures.
+
+ In this mode, on LIMITED or FULL devices, when a request
+ is made with a android.control.captureIntent of
+ STILL_CAPTURE, the camera device will capture an image
+ using a high dynamic range capture technique. On LEGACY
+ devices, captures that target a JPEG-format output will
+ be captured with HDR, and the capture intent is not
+ relevant.
+
+ The HDR capture may involve the device capturing a burst
+ of images internally and combining them into one, or it
+ may involve the device using specialized high dynamic
+ range capture hardware. In all cases, a single image is
+ produced in response to a capture request submitted
+ while in HDR mode.
+
+ Since substantial post-processing is generally needed to
+ produce an HDR image, only YUV, PRIVATE, and JPEG
+ outputs are supported for LIMITED/FULL device HDR
+ captures, and only JPEG outputs are supported for LEGACY
+ HDR captures. Using a RAW output for HDR capture is not
+ supported.
+
+ Some devices may also support always-on HDR, which
+ applies HDR processing at full frame rate. For these
+ devices, intents other than STILL_CAPTURE will also
+ produce an HDR output with no frame rate impact compared
+ to normal operation, though the quality may be lower
+ than for STILL_CAPTURE intents.
+
+ If SCENE_MODE_HDR is used with unsupported output types
+ or capture intents, the images captured will be as if
+ the SCENE_MODE was not enabled at all.
+ </notes>
+ </value>
+ <value optional="true" hidden="true">FACE_PRIORITY_LOW_LIGHT
+ <notes>Same as FACE_PRIORITY scene mode, except that the camera
+ device will choose higher sensitivity values (android.sensor.sensitivity)
+ under low light conditions.
+
+ The camera device may be tuned to expose the images in a reduced
+ sensitivity range to produce the best quality images. For example,
+ if the android.sensor.info.sensitivityRange gives range of [100, 1600],
+ the camera device auto-exposure routine tuning process may limit the actual
+ exposure sensitivity range to [100, 1200] to ensure that the noise level isn't
+ exessive in order to preserve the image quality. Under this situation, the image under
+ low light may be under-exposed when the sensor max exposure time (bounded by the
+ android.control.aeTargetFpsRange when android.control.aeMode is one of the
+ ON_* modes) and effective max sensitivity are reached. This scene mode allows the
+ camera device auto-exposure routine to increase the sensitivity up to the max
+ sensitivity specified by android.sensor.info.sensitivityRange when the scene is too
+ dark and the max exposure time is reached. The captured images may be noisier
+ compared with the images captured in normal FACE_PRIORITY mode; therefore, it is
+ recommended that the application only use this scene mode when it is capable of
+ reducing the noise level of the captured images.
+
+ Unlike the other scene modes, android.control.aeMode,
+ android.control.awbMode, and android.control.afMode
+ remain active when FACE_PRIORITY_LOW_LIGHT is set.
+ </notes>
+ </value>
+ <value optional="true" hidden="true" id="100">DEVICE_CUSTOM_START
+ <notes>
+ Scene mode values within the range of
+ `[DEVICE_CUSTOM_START, DEVICE_CUSTOM_END]` are reserved for device specific
+ customized scene modes.
+ </notes>
+ </value>
+ <value optional="true" hidden="true" id="127">DEVICE_CUSTOM_END
+ <notes>
+ Scene mode values within the range of
+ `[DEVICE_CUSTOM_START, DEVICE_CUSTOM_END]` are reserved for device specific
+ customized scene modes.
+ </notes>
+ </value>
+ </enum>
+ <description>
+ Control for which scene mode is currently active.
+ </description>
+ <range>android.control.availableSceneModes</range>
+ <details>
+ Scene modes are custom camera modes optimized for a certain set of conditions and
+ capture settings.
+
+ This is the mode that that is active when
+ `android.control.mode == USE_SCENE_MODE`. Aside from FACE_PRIORITY, these modes will
+ disable android.control.aeMode, android.control.awbMode, and android.control.afMode
+ while in use.
+
+ The interpretation and implementation of these scene modes is left
+ to the implementor of the camera device. Their behavior will not be
+ consistent across all devices, and any given device may only implement
+ a subset of these modes.
+ </details>
+ <hal_details>
+ HAL implementations that include scene modes are expected to provide
+ the per-scene settings to use for android.control.aeMode,
+ android.control.awbMode, and android.control.afMode in
+ android.control.sceneModeOverrides.
+
+ For HIGH_SPEED_VIDEO mode, if it is included in android.control.availableSceneModes,
+ the HAL must list supported video size and fps range in
+ android.control.availableHighSpeedVideoConfigurations. For a given size, e.g.
+ 1280x720, if the HAL has two different sensor configurations for normal streaming
+ mode and high speed streaming, when this scene mode is set/reset in a sequence of capture
+ requests, the HAL may have to switch between different sensor modes.
+ This mode is deprecated in HAL3.3, to support high speed video recording, please implement
+ android.control.availableHighSpeedVideoConfigurations and CONSTRAINED_HIGH_SPEED_VIDEO
+ capbility defined in android.request.availableCapabilities.
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ <entry name="videoStabilizationMode" type="byte" visibility="public"
+ enum="true" hwlevel="legacy">
+ <enum>
+ <value>OFF
+ <notes>
+ Video stabilization is disabled.
+ </notes></value>
+ <value>ON
+ <notes>
+ Video stabilization is enabled.
+ </notes></value>
+ </enum>
+ <description>Whether video stabilization is
+ active.</description>
+ <details>
+ Video stabilization automatically warps images from
+ the camera in order to stabilize motion between consecutive frames.
+
+ If enabled, video stabilization can modify the
+ android.scaler.cropRegion to keep the video stream stabilized.
+
+ Switching between different video stabilization modes may take several
+ frames to initialize, the camera device will report the current mode
+ in capture result metadata. For example, When "ON" mode is requested,
+ the video stabilization modes in the first several capture results may
+ still be "OFF", and it will become "ON" when the initialization is
+ done.
+
+ In addition, not all recording sizes or frame rates may be supported for
+ stabilization by a device that reports stabilization support. It is guaranteed
+ that an output targeting a MediaRecorder or MediaCodec will be stabilized if
+ the recording resolution is less than or equal to 1920 x 1080 (width less than
+ or equal to 1920, height less than or equal to 1080), and the recording
+ frame rate is less than or equal to 30fps. At other sizes, the CaptureResult
+ android.control.videoStabilizationMode field will return
+ OFF if the recording output is not stabilized, or if there are no output
+ Surface types that can be stabilized.
+
+ If a camera device supports both this mode and OIS
+ (android.lens.opticalStabilizationMode), turning both modes on may
+ produce undesirable interaction, so it is recommended not to enable
+ both at the same time.
+ </details>
+ <tag id="BC" />
+ </entry>
+ </controls>
+ <static>
+ <entry name="aeAvailableAntibandingModes" type="byte" visibility="public"
+ type_notes="list of enums" container="array" typedef="enumList"
+ hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of auto-exposure antibanding modes for android.control.aeAntibandingMode that are
+ supported by this camera device.
+ </description>
+ <range>Any value listed in android.control.aeAntibandingMode</range>
+ <details>
+ Not all of the auto-exposure anti-banding modes may be
+ supported by a given camera device. This field lists the
+ valid anti-banding modes that the application may request
+ for this camera device with the
+ android.control.aeAntibandingMode control.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="aeAvailableModes" type="byte" visibility="public"
+ type_notes="list of enums" container="array" typedef="enumList"
+ hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of auto-exposure modes for android.control.aeMode that are supported by this camera
+ device.
+ </description>
+ <range>Any value listed in android.control.aeMode</range>
+ <details>
+ Not all the auto-exposure modes may be supported by a
+ given camera device, especially if no flash unit is
+ available. This entry lists the valid modes for
+ android.control.aeMode for this camera device.
+
+ All camera devices support ON, and all camera devices with flash
+ units support ON_AUTO_FLASH and ON_ALWAYS_FLASH.
+
+ FULL mode camera devices always support OFF mode,
+ which enables application control of camera exposure time,
+ sensitivity, and frame duration.
+
+ LEGACY mode camera devices never support OFF mode.
+ LIMITED mode devices support OFF if they support the MANUAL_SENSOR
+ capability.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="aeAvailableTargetFpsRanges" type="int32" visibility="public"
+ type_notes="list of pairs of frame rates"
+ container="array" typedef="rangeInt"
+ hwlevel="legacy">
+ <array>
+ <size>2</size>
+ <size>n</size>
+ </array>
+ <description>List of frame rate ranges for android.control.aeTargetFpsRange supported by
+ this camera device.</description>
+ <units>Frames per second (FPS)</units>
+ <details>
+ For devices at the LEGACY level or above:
+
+ * For constant-framerate recording, for each normal
+ [CamcorderProfile](https://developer.android.com/reference/android/media/CamcorderProfile.html), that is, a
+ [CamcorderProfile](https://developer.android.com/reference/android/media/CamcorderProfile.html) that has
+ [quality](https://developer.android.com/reference/android/media/CamcorderProfile.html#quality)
+ in the range [
+ [QUALITY_LOW](https://developer.android.com/reference/android/media/CamcorderProfile.html#QUALITY_LOW),
+ [QUALITY_2160P](https://developer.android.com/reference/android/media/CamcorderProfile.html#QUALITY_2160P)],
+ if the profile is supported by the device and has
+ [videoFrameRate](https://developer.android.com/reference/android/media/CamcorderProfile.html#videoFrameRate)
+ `x`, this list will always include (`x`,`x`).
+
+ * Also, a camera device must either not support any
+ [CamcorderProfile](https://developer.android.com/reference/android/media/CamcorderProfile.html),
+ or support at least one
+ normal [CamcorderProfile](https://developer.android.com/reference/android/media/CamcorderProfile.html)
+ that has
+ [videoFrameRate](https://developer.android.com/reference/android/media/CamcorderProfile.html#videoFrameRate) `x` >= 24.
+
+ For devices at the LIMITED level or above:
+
+ * For YUV_420_888 burst capture use case, this list will always include (`min`, `max`)
+ and (`max`, `max`) where `min` <= 15 and `max` = the maximum output frame rate of the
+ maximum YUV_420_888 output size.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="aeCompensationRange" type="int32" visibility="public"
+ container="array" typedef="rangeInt"
+ hwlevel="legacy">
+ <array>
+ <size>2</size>
+ </array>
+ <description>Maximum and minimum exposure compensation values for
+ android.control.aeExposureCompensation, in counts of android.control.aeCompensationStep,
+ that are supported by this camera device.</description>
+ <range>
+ Range [0,0] indicates that exposure compensation is not supported.
+
+ For LIMITED and FULL devices, range must follow below requirements if exposure
+ compensation is supported (`range != [0, 0]`):
+
+ `Min.exposure compensation * android.control.aeCompensationStep <= -2 EV`
+
+ `Max.exposure compensation * android.control.aeCompensationStep >= 2 EV`
+
+ LEGACY devices may support a smaller range than this.
+ </range>
+ <tag id="BC" />
+ </entry>
+ <entry name="aeCompensationStep" type="rational" visibility="public"
+ hwlevel="legacy">
+ <description>Smallest step by which the exposure compensation
+ can be changed.</description>
+ <units>Exposure Value (EV)</units>
+ <details>
+ This is the unit for android.control.aeExposureCompensation. For example, if this key has
+ a value of `1/2`, then a setting of `-2` for android.control.aeExposureCompensation means
+ that the target EV offset for the auto-exposure routine is -1 EV.
+
+ One unit of EV compensation changes the brightness of the captured image by a factor
+ of two. +1 EV doubles the image brightness, while -1 EV halves the image brightness.
+ </details>
+ <hal_details>
+ This must be less than or equal to 1/2.
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ <entry name="afAvailableModes" type="byte" visibility="public"
+ type_notes="List of enums" container="array" typedef="enumList"
+ hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of auto-focus (AF) modes for android.control.afMode that are
+ supported by this camera device.
+ </description>
+ <range>Any value listed in android.control.afMode</range>
+ <details>
+ Not all the auto-focus modes may be supported by a
+ given camera device. This entry lists the valid modes for
+ android.control.afMode for this camera device.
+
+ All LIMITED and FULL mode camera devices will support OFF mode, and all
+ camera devices with adjustable focuser units
+ (`android.lens.info.minimumFocusDistance > 0`) will support AUTO mode.
+
+ LEGACY devices will support OFF mode only if they support
+ focusing to infinity (by also setting android.lens.focusDistance to
+ `0.0f`).
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="availableEffects" type="byte" visibility="public"
+ type_notes="List of enums (android.control.effectMode)." container="array"
+ typedef="enumList" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of color effects for android.control.effectMode that are supported by this camera
+ device.
+ </description>
+ <range>Any value listed in android.control.effectMode</range>
+ <details>
+ This list contains the color effect modes that can be applied to
+ images produced by the camera device.
+ Implementations are not expected to be consistent across all devices.
+ If no color effect modes are available for a device, this will only list
+ OFF.
+
+ A color effect will only be applied if
+ android.control.mode != OFF. OFF is always included in this list.
+
+ This control has no effect on the operation of other control routines such
+ as auto-exposure, white balance, or focus.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="availableSceneModes" type="byte" visibility="public"
+ type_notes="List of enums (android.control.sceneMode)."
+ container="array" typedef="enumList" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of scene modes for android.control.sceneMode that are supported by this camera
+ device.
+ </description>
+ <range>Any value listed in android.control.sceneMode</range>
+ <details>
+ This list contains scene modes that can be set for the camera device.
+ Only scene modes that have been fully implemented for the
+ camera device may be included here. Implementations are not expected
+ to be consistent across all devices.
+
+ If no scene modes are supported by the camera device, this
+ will be set to DISABLED. Otherwise DISABLED will not be listed.
+
+ FACE_PRIORITY is always listed if face detection is
+ supported (i.e.`android.statistics.info.maxFaceCount >
+ 0`).
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="availableVideoStabilizationModes" type="byte"
+ visibility="public" type_notes="List of enums." container="array"
+ typedef="enumList" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of video stabilization modes for android.control.videoStabilizationMode
+ that are supported by this camera device.
+ </description>
+ <range>Any value listed in android.control.videoStabilizationMode</range>
+ <details>
+ OFF will always be listed.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="awbAvailableModes" type="byte" visibility="public"
+ type_notes="List of enums"
+ container="array" typedef="enumList" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of auto-white-balance modes for android.control.awbMode that are supported by this
+ camera device.
+ </description>
+ <range>Any value listed in android.control.awbMode</range>
+ <details>
+ Not all the auto-white-balance modes may be supported by a
+ given camera device. This entry lists the valid modes for
+ android.control.awbMode for this camera device.
+
+ All camera devices will support ON mode.
+
+ Camera devices that support the MANUAL_POST_PROCESSING capability will always support OFF
+ mode, which enables application control of white balance, by using
+ android.colorCorrection.transform and android.colorCorrection.gains
+ (android.colorCorrection.mode must be set to TRANSFORM_MATRIX). This includes all FULL
+ mode camera devices.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="maxRegions" type="int32" visibility="ndk_public"
+ container="array" hwlevel="legacy">
+ <array>
+ <size>3</size>
+ </array>
+ <description>
+ List of the maximum number of regions that can be used for metering in
+ auto-exposure (AE), auto-white balance (AWB), and auto-focus (AF);
+ this corresponds to the the maximum number of elements in
+ android.control.aeRegions, android.control.awbRegions,
+ and android.control.afRegions.
+ </description>
+ <range>
+ Value must be &gt;= 0 for each element. For full-capability devices
+ this value must be &gt;= 1 for AE and AF. The order of the elements is:
+ `(AE, AWB, AF)`.</range>
+ <tag id="BC" />
+ </entry>
+ <entry name="maxRegionsAe" type="int32" visibility="java_public"
+ synthetic="true" hwlevel="legacy">
+ <description>
+ The maximum number of metering regions that can be used by the auto-exposure (AE)
+ routine.
+ </description>
+ <range>Value will be &gt;= 0. For FULL-capability devices, this
+ value will be &gt;= 1.
+ </range>
+ <details>
+ This corresponds to the the maximum allowed number of elements in
+ android.control.aeRegions.
+ </details>
+ <hal_details>This entry is private to the framework. Fill in
+ maxRegions to have this entry be automatically populated.
+ </hal_details>
+ </entry>
+ <entry name="maxRegionsAwb" type="int32" visibility="java_public"
+ synthetic="true" hwlevel="legacy">
+ <description>
+ The maximum number of metering regions that can be used by the auto-white balance (AWB)
+ routine.
+ </description>
+ <range>Value will be &gt;= 0.
+ </range>
+ <details>
+ This corresponds to the the maximum allowed number of elements in
+ android.control.awbRegions.
+ </details>
+ <hal_details>This entry is private to the framework. Fill in
+ maxRegions to have this entry be automatically populated.
+ </hal_details>
+ </entry>
+ <entry name="maxRegionsAf" type="int32" visibility="java_public"
+ synthetic="true" hwlevel="legacy">
+ <description>
+ The maximum number of metering regions that can be used by the auto-focus (AF) routine.
+ </description>
+ <range>Value will be &gt;= 0. For FULL-capability devices, this
+ value will be &gt;= 1.
+ </range>
+ <details>
+ This corresponds to the the maximum allowed number of elements in
+ android.control.afRegions.
+ </details>
+ <hal_details>This entry is private to the framework. Fill in
+ maxRegions to have this entry be automatically populated.
+ </hal_details>
+ </entry>
+ <entry name="sceneModeOverrides" type="byte" visibility="system"
+ container="array" hwlevel="limited">
+ <array>
+ <size>3</size>
+ <size>length(availableSceneModes)</size>
+ </array>
+ <description>
+ Ordered list of auto-exposure, auto-white balance, and auto-focus
+ settings to use with each available scene mode.
+ </description>
+ <range>
+ For each available scene mode, the list must contain three
+ entries containing the android.control.aeMode,
+ android.control.awbMode, and android.control.afMode values used
+ by the camera device. The entry order is `(aeMode, awbMode, afMode)`
+ where aeMode has the lowest index position.
+ </range>
+ <details>
+ When a scene mode is enabled, the camera device is expected
+ to override android.control.aeMode, android.control.awbMode,
+ and android.control.afMode with its preferred settings for
+ that scene mode.
+
+ The order of this list matches that of availableSceneModes,
+ with 3 entries for each mode. The overrides listed
+ for FACE_PRIORITY and FACE_PRIORITY_LOW_LIGHT (if supported) are ignored,
+ since for that mode the application-set android.control.aeMode,
+ android.control.awbMode, and android.control.afMode values are
+ used instead, matching the behavior when android.control.mode
+ is set to AUTO. It is recommended that the FACE_PRIORITY and
+ FACE_PRIORITY_LOW_LIGHT (if supported) overrides should be set to 0.
+
+ For example, if availableSceneModes contains
+ `(FACE_PRIORITY, ACTION, NIGHT)`, then the camera framework
+ expects sceneModeOverrides to have 9 entries formatted like:
+ `(0, 0, 0, ON_AUTO_FLASH, AUTO, CONTINUOUS_PICTURE,
+ ON_AUTO_FLASH, INCANDESCENT, AUTO)`.
+ </details>
+ <hal_details>
+ To maintain backward compatibility, this list will be made available
+ in the static metadata of the camera service. The camera service will
+ use these values to set android.control.aeMode,
+ android.control.awbMode, and android.control.afMode when using a scene
+ mode other than FACE_PRIORITY and FACE_PRIORITY_LOW_LIGHT (if supported).
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ </static>
+ <dynamic>
+ <entry name="aePrecaptureId" type="int32" visibility="system" deprecated="true">
+ <description>The ID sent with the latest
+ CAMERA2_TRIGGER_PRECAPTURE_METERING call</description>
+ <details>Must be 0 if no
+ CAMERA2_TRIGGER_PRECAPTURE_METERING trigger received yet
+ by HAL. Always updated even if AE algorithm ignores the
+ trigger</details>
+ </entry>
+ <clone entry="android.control.aeAntibandingMode" kind="controls">
+ </clone>
+ <clone entry="android.control.aeExposureCompensation" kind="controls">
+ </clone>
+ <clone entry="android.control.aeLock" kind="controls">
+ </clone>
+ <clone entry="android.control.aeMode" kind="controls">
+ </clone>
+ <clone entry="android.control.aeRegions" kind="controls">
+ </clone>
+ <clone entry="android.control.aeTargetFpsRange" kind="controls">
+ </clone>
+ <clone entry="android.control.aePrecaptureTrigger" kind="controls">
+ </clone>
+ <entry name="aeState" type="byte" visibility="public" enum="true"
+ hwlevel="limited">
+ <enum>
+ <value>INACTIVE
+ <notes>AE is off or recently reset.
+
+ When a camera device is opened, it starts in
+ this state. This is a transient state, the camera device may skip reporting
+ this state in capture result.</notes></value>
+ <value>SEARCHING
+ <notes>AE doesn't yet have a good set of control values
+ for the current scene.
+
+ This is a transient state, the camera device may skip
+ reporting this state in capture result.</notes></value>
+ <value>CONVERGED
+ <notes>AE has a good set of control values for the
+ current scene.</notes></value>
+ <value>LOCKED
+ <notes>AE has been locked.</notes></value>
+ <value>FLASH_REQUIRED
+ <notes>AE has a good set of control values, but flash
+ needs to be fired for good quality still
+ capture.</notes></value>
+ <value>PRECAPTURE
+ <notes>AE has been asked to do a precapture sequence
+ and is currently executing it.
+
+ Precapture can be triggered through setting
+ android.control.aePrecaptureTrigger to START. Currently
+ active and completed (if it causes camera device internal AE lock) precapture
+ metering sequence can be canceled through setting
+ android.control.aePrecaptureTrigger to CANCEL.
+
+ Once PRECAPTURE completes, AE will transition to CONVERGED
+ or FLASH_REQUIRED as appropriate. This is a transient
+ state, the camera device may skip reporting this state in
+ capture result.</notes></value>
+ </enum>
+ <description>Current state of the auto-exposure (AE) algorithm.</description>
+ <details>Switching between or enabling AE modes (android.control.aeMode) always
+ resets the AE state to INACTIVE. Similarly, switching between android.control.mode,
+ or android.control.sceneMode if `android.control.mode == USE_SCENE_MODE` resets all
+ the algorithm states to INACTIVE.
+
+ The camera device can do several state transitions between two results, if it is
+ allowed by the state transition table. For example: INACTIVE may never actually be
+ seen in a result.
+
+ The state in the result is the state for this image (in sync with this image): if
+ AE state becomes CONVERGED, then the image data associated with this result should
+ be good to use.
+
+ Below are state transition tables for different AE modes.
+
+ State | Transition Cause | New State | Notes
+ :------------:|:----------------:|:---------:|:-----------------------:
+ INACTIVE | | INACTIVE | Camera device auto exposure algorithm is disabled
+
+ When android.control.aeMode is AE_MODE_ON_*:
+
+ State | Transition Cause | New State | Notes
+ :-------------:|:--------------------------------------------:|:--------------:|:-----------------:
+ INACTIVE | Camera device initiates AE scan | SEARCHING | Values changing
+ INACTIVE | android.control.aeLock is ON | LOCKED | Values locked
+ SEARCHING | Camera device finishes AE scan | CONVERGED | Good values, not changing
+ SEARCHING | Camera device finishes AE scan | FLASH_REQUIRED | Converged but too dark w/o flash
+ SEARCHING | android.control.aeLock is ON | LOCKED | Values locked
+ CONVERGED | Camera device initiates AE scan | SEARCHING | Values changing
+ CONVERGED | android.control.aeLock is ON | LOCKED | Values locked
+ FLASH_REQUIRED | Camera device initiates AE scan | SEARCHING | Values changing
+ FLASH_REQUIRED | android.control.aeLock is ON | LOCKED | Values locked
+ LOCKED | android.control.aeLock is OFF | SEARCHING | Values not good after unlock
+ LOCKED | android.control.aeLock is OFF | CONVERGED | Values good after unlock
+ LOCKED | android.control.aeLock is OFF | FLASH_REQUIRED | Exposure good, but too dark
+ PRECAPTURE | Sequence done. android.control.aeLock is OFF | CONVERGED | Ready for high-quality capture
+ PRECAPTURE | Sequence done. android.control.aeLock is ON | LOCKED | Ready for high-quality capture
+ LOCKED | aeLock is ON and aePrecaptureTrigger is START | LOCKED | Precapture trigger is ignored when AE is already locked
+ LOCKED | aeLock is ON and aePrecaptureTrigger is CANCEL| LOCKED | Precapture trigger is ignored when AE is already locked
+ Any state (excluding LOCKED) | android.control.aePrecaptureTrigger is START | PRECAPTURE | Start AE precapture metering sequence
+ Any state (excluding LOCKED) | android.control.aePrecaptureTrigger is CANCEL| INACTIVE | Currently active precapture metering sequence is canceled
+
+ For the above table, the camera device may skip reporting any state changes that happen
+ without application intervention (i.e. mode switch, trigger, locking). Any state that
+ can be skipped in that manner is called a transient state.
+
+ For example, for above AE modes (AE_MODE_ON_*), in addition to the state transitions
+ listed in above table, it is also legal for the camera device to skip one or more
+ transient states between two results. See below table for examples:
+
+ State | Transition Cause | New State | Notes
+ :-------------:|:-----------------------------------------------------------:|:--------------:|:-----------------:
+ INACTIVE | Camera device finished AE scan | CONVERGED | Values are already good, transient states are skipped by camera device.
+ Any state (excluding LOCKED) | android.control.aePrecaptureTrigger is START, sequence done | FLASH_REQUIRED | Converged but too dark w/o flash after a precapture sequence, transient states are skipped by camera device.
+ Any state (excluding LOCKED) | android.control.aePrecaptureTrigger is START, sequence done | CONVERGED | Converged after a precapture sequence, transient states are skipped by camera device.
+ Any state (excluding LOCKED) | android.control.aePrecaptureTrigger is CANCEL, converged | FLASH_REQUIRED | Converged but too dark w/o flash after a precapture sequence is canceled, transient states are skipped by camera device.
+ Any state (excluding LOCKED) | android.control.aePrecaptureTrigger is CANCEL, converged | CONVERGED | Converged after a precapture sequenceis canceled, transient states are skipped by camera device.
+ CONVERGED | Camera device finished AE scan | FLASH_REQUIRED | Converged but too dark w/o flash after a new scan, transient states are skipped by camera device.
+ FLASH_REQUIRED | Camera device finished AE scan | CONVERGED | Converged after a new scan, transient states are skipped by camera device.
+ </details>
+ </entry>
+ <clone entry="android.control.afMode" kind="controls">
+ </clone>
+ <clone entry="android.control.afRegions" kind="controls">
+ </clone>
+ <clone entry="android.control.afTrigger" kind="controls">
+ </clone>
+ <entry name="afState" type="byte" visibility="public" enum="true"
+ hwlevel="legacy">
+ <enum>
+ <value>INACTIVE
+ <notes>AF is off or has not yet tried to scan/been asked
+ to scan.
+
+ When a camera device is opened, it starts in this
+ state. This is a transient state, the camera device may
+ skip reporting this state in capture
+ result.</notes></value>
+ <value>PASSIVE_SCAN
+ <notes>AF is currently performing an AF scan initiated the
+ camera device in a continuous autofocus mode.
+
+ Only used by CONTINUOUS_* AF modes. This is a transient
+ state, the camera device may skip reporting this state in
+ capture result.</notes></value>
+ <value>PASSIVE_FOCUSED
+ <notes>AF currently believes it is in focus, but may
+ restart scanning at any time.
+
+ Only used by CONTINUOUS_* AF modes. This is a transient
+ state, the camera device may skip reporting this state in
+ capture result.</notes></value>
+ <value>ACTIVE_SCAN
+ <notes>AF is performing an AF scan because it was
+ triggered by AF trigger.
+
+ Only used by AUTO or MACRO AF modes. This is a transient
+ state, the camera device may skip reporting this state in
+ capture result.</notes></value>
+ <value>FOCUSED_LOCKED
+ <notes>AF believes it is focused correctly and has locked
+ focus.
+
+ This state is reached only after an explicit START AF trigger has been
+ sent (android.control.afTrigger), when good focus has been obtained.
+
+ The lens will remain stationary until the AF mode (android.control.afMode) is changed or
+ a new AF trigger is sent to the camera device (android.control.afTrigger).
+ </notes></value>
+ <value>NOT_FOCUSED_LOCKED
+ <notes>AF has failed to focus successfully and has locked
+ focus.
+
+ This state is reached only after an explicit START AF trigger has been
+ sent (android.control.afTrigger), when good focus cannot be obtained.
+
+ The lens will remain stationary until the AF mode (android.control.afMode) is changed or
+ a new AF trigger is sent to the camera device (android.control.afTrigger).
+ </notes></value>
+ <value>PASSIVE_UNFOCUSED
+ <notes>AF finished a passive scan without finding focus,
+ and may restart scanning at any time.
+
+ Only used by CONTINUOUS_* AF modes. This is a transient state, the camera
+ device may skip reporting this state in capture result.
+
+ LEGACY camera devices do not support this state. When a passive
+ scan has finished, it will always go to PASSIVE_FOCUSED.
+ </notes></value>
+ </enum>
+ <description>Current state of auto-focus (AF) algorithm.</description>
+ <details>
+ Switching between or enabling AF modes (android.control.afMode) always
+ resets the AF state to INACTIVE. Similarly, switching between android.control.mode,
+ or android.control.sceneMode if `android.control.mode == USE_SCENE_MODE` resets all
+ the algorithm states to INACTIVE.
+
+ The camera device can do several state transitions between two results, if it is
+ allowed by the state transition table. For example: INACTIVE may never actually be
+ seen in a result.
+
+ The state in the result is the state for this image (in sync with this image): if
+ AF state becomes FOCUSED, then the image data associated with this result should
+ be sharp.
+
+ Below are state transition tables for different AF modes.
+
+ When android.control.afMode is AF_MODE_OFF or AF_MODE_EDOF:
+
+ State | Transition Cause | New State | Notes
+ :------------:|:----------------:|:---------:|:-----------:
+ INACTIVE | | INACTIVE | Never changes
+
+ When android.control.afMode is AF_MODE_AUTO or AF_MODE_MACRO:
+
+ State | Transition Cause | New State | Notes
+ :-----------------:|:----------------:|:------------------:|:--------------:
+ INACTIVE | AF_TRIGGER | ACTIVE_SCAN | Start AF sweep, Lens now moving
+ ACTIVE_SCAN | AF sweep done | FOCUSED_LOCKED | Focused, Lens now locked
+ ACTIVE_SCAN | AF sweep done | NOT_FOCUSED_LOCKED | Not focused, Lens now locked
+ ACTIVE_SCAN | AF_CANCEL | INACTIVE | Cancel/reset AF, Lens now locked
+ FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Cancel/reset AF
+ FOCUSED_LOCKED | AF_TRIGGER | ACTIVE_SCAN | Start new sweep, Lens now moving
+ NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Cancel/reset AF
+ NOT_FOCUSED_LOCKED | AF_TRIGGER | ACTIVE_SCAN | Start new sweep, Lens now moving
+ Any state | Mode change | INACTIVE |
+
+ For the above table, the camera device may skip reporting any state changes that happen
+ without application intervention (i.e. mode switch, trigger, locking). Any state that
+ can be skipped in that manner is called a transient state.
+
+ For example, for these AF modes (AF_MODE_AUTO and AF_MODE_MACRO), in addition to the
+ state transitions listed in above table, it is also legal for the camera device to skip
+ one or more transient states between two results. See below table for examples:
+
+ State | Transition Cause | New State | Notes
+ :-----------------:|:----------------:|:------------------:|:--------------:
+ INACTIVE | AF_TRIGGER | FOCUSED_LOCKED | Focus is already good or good after a scan, lens is now locked.
+ INACTIVE | AF_TRIGGER | NOT_FOCUSED_LOCKED | Focus failed after a scan, lens is now locked.
+ FOCUSED_LOCKED | AF_TRIGGER | FOCUSED_LOCKED | Focus is already good or good after a scan, lens is now locked.
+ NOT_FOCUSED_LOCKED | AF_TRIGGER | FOCUSED_LOCKED | Focus is good after a scan, lens is not locked.
+
+
+ When android.control.afMode is AF_MODE_CONTINUOUS_VIDEO:
+
+ State | Transition Cause | New State | Notes
+ :-----------------:|:-----------------------------------:|:------------------:|:--------------:
+ INACTIVE | Camera device initiates new scan | PASSIVE_SCAN | Start AF scan, Lens now moving
+ INACTIVE | AF_TRIGGER | NOT_FOCUSED_LOCKED | AF state query, Lens now locked
+ PASSIVE_SCAN | Camera device completes current scan| PASSIVE_FOCUSED | End AF scan, Lens now locked
+ PASSIVE_SCAN | Camera device fails current scan | PASSIVE_UNFOCUSED | End AF scan, Lens now locked
+ PASSIVE_SCAN | AF_TRIGGER | FOCUSED_LOCKED | Immediate transition, if focus is good. Lens now locked
+ PASSIVE_SCAN | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate transition, if focus is bad. Lens now locked
+ PASSIVE_SCAN | AF_CANCEL | INACTIVE | Reset lens position, Lens now locked
+ PASSIVE_FOCUSED | Camera device initiates new scan | PASSIVE_SCAN | Start AF scan, Lens now moving
+ PASSIVE_UNFOCUSED | Camera device initiates new scan | PASSIVE_SCAN | Start AF scan, Lens now moving
+ PASSIVE_FOCUSED | AF_TRIGGER | FOCUSED_LOCKED | Immediate transition, lens now locked
+ PASSIVE_UNFOCUSED | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate transition, lens now locked
+ FOCUSED_LOCKED | AF_TRIGGER | FOCUSED_LOCKED | No effect
+ FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan
+ NOT_FOCUSED_LOCKED | AF_TRIGGER | NOT_FOCUSED_LOCKED | No effect
+ NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan
+
+ When android.control.afMode is AF_MODE_CONTINUOUS_PICTURE:
+
+ State | Transition Cause | New State | Notes
+ :-----------------:|:------------------------------------:|:------------------:|:--------------:
+ INACTIVE | Camera device initiates new scan | PASSIVE_SCAN | Start AF scan, Lens now moving
+ INACTIVE | AF_TRIGGER | NOT_FOCUSED_LOCKED | AF state query, Lens now locked
+ PASSIVE_SCAN | Camera device completes current scan | PASSIVE_FOCUSED | End AF scan, Lens now locked
+ PASSIVE_SCAN | Camera device fails current scan | PASSIVE_UNFOCUSED | End AF scan, Lens now locked
+ PASSIVE_SCAN | AF_TRIGGER | FOCUSED_LOCKED | Eventual transition once the focus is good. Lens now locked
+ PASSIVE_SCAN | AF_TRIGGER | NOT_FOCUSED_LOCKED | Eventual transition if cannot find focus. Lens now locked
+ PASSIVE_SCAN | AF_CANCEL | INACTIVE | Reset lens position, Lens now locked
+ PASSIVE_FOCUSED | Camera device initiates new scan | PASSIVE_SCAN | Start AF scan, Lens now moving
+ PASSIVE_UNFOCUSED | Camera device initiates new scan | PASSIVE_SCAN | Start AF scan, Lens now moving
+ PASSIVE_FOCUSED | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. Lens now locked
+ PASSIVE_UNFOCUSED | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. Lens now locked
+ FOCUSED_LOCKED | AF_TRIGGER | FOCUSED_LOCKED | No effect
+ FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan
+ NOT_FOCUSED_LOCKED | AF_TRIGGER | NOT_FOCUSED_LOCKED | No effect
+ NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan
+
+ When switch between AF_MODE_CONTINUOUS_* (CAF modes) and AF_MODE_AUTO/AF_MODE_MACRO
+ (AUTO modes), the initial INACTIVE or PASSIVE_SCAN states may be skipped by the
+ camera device. When a trigger is included in a mode switch request, the trigger
+ will be evaluated in the context of the new mode in the request.
+ See below table for examples:
+
+ State | Transition Cause | New State | Notes
+ :-----------:|:--------------------------------------:|:----------------------------------------:|:--------------:
+ any state | CAF-->AUTO mode switch | INACTIVE | Mode switch without trigger, initial state must be INACTIVE
+ any state | CAF-->AUTO mode switch with AF_TRIGGER | trigger-reachable states from INACTIVE | Mode switch with trigger, INACTIVE is skipped
+ any state | AUTO-->CAF mode switch | passively reachable states from INACTIVE | Mode switch without trigger, passive transient state is skipped
+ </details>
+ </entry>
+ <entry name="afTriggerId" type="int32" visibility="system" deprecated="true">
+ <description>The ID sent with the latest
+ CAMERA2_TRIGGER_AUTOFOCUS call</description>
+ <details>Must be 0 if no CAMERA2_TRIGGER_AUTOFOCUS trigger
+ received yet by HAL. Always updated even if AF algorithm
+ ignores the trigger</details>
+ </entry>
+ <clone entry="android.control.awbLock" kind="controls">
+ </clone>
+ <clone entry="android.control.awbMode" kind="controls">
+ </clone>
+ <clone entry="android.control.awbRegions" kind="controls">
+ </clone>
+ <clone entry="android.control.captureIntent" kind="controls">
+ </clone>
+ <entry name="awbState" type="byte" visibility="public" enum="true"
+ hwlevel="limited">
+ <enum>
+ <value>INACTIVE
+ <notes>AWB is not in auto mode, or has not yet started metering.
+
+ When a camera device is opened, it starts in this
+ state. This is a transient state, the camera device may
+ skip reporting this state in capture
+ result.</notes></value>
+ <value>SEARCHING
+ <notes>AWB doesn't yet have a good set of control
+ values for the current scene.
+
+ This is a transient state, the camera device
+ may skip reporting this state in capture result.</notes></value>
+ <value>CONVERGED
+ <notes>AWB has a good set of control values for the
+ current scene.</notes></value>
+ <value>LOCKED
+ <notes>AWB has been locked.
+ </notes></value>
+ </enum>
+ <description>Current state of auto-white balance (AWB) algorithm.</description>
+ <details>Switching between or enabling AWB modes (android.control.awbMode) always
+ resets the AWB state to INACTIVE. Similarly, switching between android.control.mode,
+ or android.control.sceneMode if `android.control.mode == USE_SCENE_MODE` resets all
+ the algorithm states to INACTIVE.
+
+ The camera device can do several state transitions between two results, if it is
+ allowed by the state transition table. So INACTIVE may never actually be seen in
+ a result.
+
+ The state in the result is the state for this image (in sync with this image): if
+ AWB state becomes CONVERGED, then the image data associated with this result should
+ be good to use.
+
+ Below are state transition tables for different AWB modes.
+
+ When `android.control.awbMode != AWB_MODE_AUTO`:
+
+ State | Transition Cause | New State | Notes
+ :------------:|:----------------:|:---------:|:-----------------------:
+ INACTIVE | |INACTIVE |Camera device auto white balance algorithm is disabled
+
+ When android.control.awbMode is AWB_MODE_AUTO:
+
+ State | Transition Cause | New State | Notes
+ :-------------:|:--------------------------------:|:-------------:|:-----------------:
+ INACTIVE | Camera device initiates AWB scan | SEARCHING | Values changing
+ INACTIVE | android.control.awbLock is ON | LOCKED | Values locked
+ SEARCHING | Camera device finishes AWB scan | CONVERGED | Good values, not changing
+ SEARCHING | android.control.awbLock is ON | LOCKED | Values locked
+ CONVERGED | Camera device initiates AWB scan | SEARCHING | Values changing
+ CONVERGED | android.control.awbLock is ON | LOCKED | Values locked
+ LOCKED | android.control.awbLock is OFF | SEARCHING | Values not good after unlock
+
+ For the above table, the camera device may skip reporting any state changes that happen
+ without application intervention (i.e. mode switch, trigger, locking). Any state that
+ can be skipped in that manner is called a transient state.
+
+ For example, for this AWB mode (AWB_MODE_AUTO), in addition to the state transitions
+ listed in above table, it is also legal for the camera device to skip one or more
+ transient states between two results. See below table for examples:
+
+ State | Transition Cause | New State | Notes
+ :-------------:|:--------------------------------:|:-------------:|:-----------------:
+ INACTIVE | Camera device finished AWB scan | CONVERGED | Values are already good, transient states are skipped by camera device.
+ LOCKED | android.control.awbLock is OFF | CONVERGED | Values good after unlock, transient states are skipped by camera device.
+ </details>
+ </entry>
+ <clone entry="android.control.effectMode" kind="controls">
+ </clone>
+ <clone entry="android.control.mode" kind="controls">
+ </clone>
+ <clone entry="android.control.sceneMode" kind="controls">
+ </clone>
+ <clone entry="android.control.videoStabilizationMode" kind="controls">
+ </clone>
+ </dynamic>
+ <static>
+ <entry name="availableHighSpeedVideoConfigurations" type="int32" visibility="hidden"
+ container="array" typedef="highSpeedVideoConfiguration" hwlevel="limited">
+ <array>
+ <size>5</size>
+ <size>n</size>
+ </array>
+ <description>
+ List of available high speed video size, fps range and max batch size configurations
+ supported by the camera device, in the format of (width, height, fps_min, fps_max, batch_size_max).
+ </description>
+ <range>
+ For each configuration, the fps_max &gt;= 120fps.
+ </range>
+ <details>
+ When CONSTRAINED_HIGH_SPEED_VIDEO is supported in android.request.availableCapabilities,
+ this metadata will list the supported high speed video size, fps range and max batch size
+ configurations. All the sizes listed in this configuration will be a subset of the sizes
+ reported by {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes}
+ for processed non-stalling formats.
+
+ For the high speed video use case, the application must
+ select the video size and fps range from this metadata to configure the recording and
+ preview streams and setup the recording requests. For example, if the application intends
+ to do high speed recording, it can select the maximum size reported by this metadata to
+ configure output streams. Once the size is selected, application can filter this metadata
+ by selected size and get the supported fps ranges, and use these fps ranges to setup the
+ recording requests. Note that for the use case of multiple output streams, application
+ must select one unique size from this metadata to use (e.g., preview and recording streams
+ must have the same size). Otherwise, the high speed capture session creation will fail.
+
+ The min and max fps will be multiple times of 30fps.
+
+ High speed video streaming extends significant performance pressue to camera hardware,
+ to achieve efficient high speed streaming, the camera device may have to aggregate
+ multiple frames together and send to camera device for processing where the request
+ controls are same for all the frames in this batch. Max batch size indicates
+ the max possible number of frames the camera device will group together for this high
+ speed stream configuration. This max batch size will be used to generate a high speed
+ recording request list by
+ {@link android.hardware.camera2.CameraConstrainedHighSpeedCaptureSession#createHighSpeedRequestList}.
+ The max batch size for each configuration will satisfy below conditions:
+
+ * Each max batch size will be a divisor of its corresponding fps_max / 30. For example,
+ if max_fps is 300, max batch size will only be 1, 2, 5, or 10.
+ * The camera device may choose smaller internal batch size for each configuration, but
+ the actual batch size will be a divisor of max batch size. For example, if the max batch
+ size is 8, the actual batch size used by camera device will only be 1, 2, 4, or 8.
+ * The max batch size in each configuration entry must be no larger than 32.
+
+ The camera device doesn't have to support batch mode to achieve high speed video recording,
+ in such case, batch_size_max will be reported as 1 in each configuration entry.
+
+ This fps ranges in this configuration list can only be used to create requests
+ that are submitted to a high speed camera capture session created by
+ {@link android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession}.
+ The fps ranges reported in this metadata must not be used to setup capture requests for
+ normal capture session, or it will cause request error.
+ </details>
+ <hal_details>
+ All the sizes listed in this configuration will be a subset of the sizes reported by
+ android.scaler.availableStreamConfigurations for processed non-stalling output formats.
+ Note that for all high speed video configurations, HAL must be able to support a minimum
+ of two streams, though the application might choose to configure just one stream.
+
+ The HAL may support multiple sensor modes for high speed outputs, for example, 120fps
+ sensor mode and 120fps recording, 240fps sensor mode for 240fps recording. The application
+ usually starts preview first, then starts recording. To avoid sensor mode switch caused
+ stutter when starting recording as much as possible, the application may want to ensure
+ the same sensor mode is used for preview and recording. Therefore, The HAL must advertise
+ the variable fps range [30, fps_max] for each fixed fps range in this configuration list.
+ For example, if the HAL advertises [120, 120] and [240, 240], the HAL must also advertise
+ [30, 120] and [30, 240] for each configuration. In doing so, if the application intends to
+ do 120fps recording, it can select [30, 120] to start preview, and [120, 120] to start
+ recording. For these variable fps ranges, it's up to the HAL to decide the actual fps
+ values that are suitable for smooth preview streaming. If the HAL sees different max_fps
+ values that fall into different sensor modes in a sequence of requests, the HAL must
+ switch the sensor mode as quick as possible to minimize the mode switch caused stutter.
+ </hal_details>
+ <tag id="V1" />
+ </entry>
+ <entry name="aeLockAvailable" type="byte" visibility="public" enum="true"
+ typedef="boolean" hwlevel="legacy">
+ <enum>
+ <value>FALSE</value>
+ <value>TRUE</value>
+ </enum>
+ <description>Whether the camera device supports android.control.aeLock</description>
+ <details>
+ Devices with MANUAL_SENSOR capability or BURST_CAPTURE capability will always
+ list `true`. This includes FULL devices.
+ </details>
+ <tag id="BC"/>
+ </entry>
+ <entry name="awbLockAvailable" type="byte" visibility="public" enum="true"
+ typedef="boolean" hwlevel="legacy">
+ <enum>
+ <value>FALSE</value>
+ <value>TRUE</value>
+ </enum>
+ <description>Whether the camera device supports android.control.awbLock</description>
+ <details>
+ Devices with MANUAL_POST_PROCESSING capability or BURST_CAPTURE capability will
+ always list `true`. This includes FULL devices.
+ </details>
+ <tag id="BC"/>
+ </entry>
+ <entry name="availableModes" type="byte" visibility="public"
+ type_notes="List of enums (android.control.mode)." container="array"
+ typedef="enumList" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of control modes for android.control.mode that are supported by this camera
+ device.
+ </description>
+ <range>Any value listed in android.control.mode</range>
+ <details>
+ This list contains control modes that can be set for the camera device.
+ LEGACY mode devices will always support AUTO mode. LIMITED and FULL
+ devices will always support OFF, AUTO modes.
+ </details>
+ </entry>
+ <entry name="postRawSensitivityBoostRange" type="int32" visibility="public"
+ type_notes="Range of supported post RAW sensitivitiy boosts"
+ container="array" typedef="rangeInt">
+ <array>
+ <size>2</size>
+ </array>
+ <description>Range of boosts for android.control.postRawSensitivityBoost supported
+ by this camera device.
+ </description>
+ <units>ISO arithmetic units, the same as android.sensor.sensitivity</units>
+ <details>
+ Devices support post RAW sensitivity boost will advertise
+ android.control.postRawSensitivityBoost key for controling
+ post RAW sensitivity boost.
+
+ This key will be `null` for devices that do not support any RAW format
+ outputs. For devices that do support RAW format outputs, this key will always
+ present, and if a device does not support post RAW sensitivity boost, it will
+ list `(100, 100)` in this key.
+ </details>
+ <hal_details>
+ This key is added in HAL3.4. For HAL3.3 or earlier devices, camera framework will
+ generate this key as `(100, 100)` if device supports any of RAW output formats.
+ All HAL3.4 and above devices should list this key if device supports any of RAW
+ output formats.
+ </hal_details>
+ </entry>
+ </static>
+ <controls>
+ <entry name="postRawSensitivityBoost" type="int32" visibility="public">
+ <description>The amount of additional sensitivity boost applied to output images
+ after RAW sensor data is captured.
+ </description>
+ <units>ISO arithmetic units, the same as android.sensor.sensitivity</units>
+ <range>android.control.postRawSensitivityBoostRange</range>
+ <details>
+ Some camera devices support additional digital sensitivity boosting in the
+ camera processing pipeline after sensor RAW image is captured.
+ Such a boost will be applied to YUV/JPEG format output images but will not
+ have effect on RAW output formats like RAW_SENSOR, RAW10, RAW12 or RAW_OPAQUE.
+
+ This key will be `null` for devices that do not support any RAW format
+ outputs. For devices that do support RAW format outputs, this key will always
+ present, and if a device does not support post RAW sensitivity boost, it will
+ list `100` in this key.
+
+ If the camera device cannot apply the exact boost requested, it will reduce the
+ boost to the nearest supported value.
+ The final boost value used will be available in the output capture result.
+
+ For devices that support post RAW sensitivity boost, the YUV/JPEG output images
+ of such device will have the total sensitivity of
+ `android.sensor.sensitivity * android.control.postRawSensitivityBoost / 100`
+ The sensitivity of RAW format images will always be `android.sensor.sensitivity`
+
+ This control is only effective if android.control.aeMode or android.control.mode is set to
+ OFF; otherwise the auto-exposure algorithm will override this value.
+ </details>
+ </entry>
+ </controls>
+ <dynamic>
+ <clone entry="android.control.postRawSensitivityBoost" kind="controls">
+ </clone>
+ </dynamic>
+ </section>
+ <section name="demosaic">
+ <controls>
+ <entry name="mode" type="byte" enum="true">
+ <enum>
+ <value>FAST
+ <notes>Minimal or no slowdown of frame rate compared to
+ Bayer RAW output.</notes></value>
+ <value>HIGH_QUALITY
+ <notes>Improved processing quality but the frame rate might be slowed down
+ relative to raw output.</notes></value>
+ </enum>
+ <description>Controls the quality of the demosaicing
+ processing.</description>
+ <tag id="FUTURE" />
+ </entry>
+ </controls>
+ </section>
+ <section name="edge">
+ <controls>
+ <entry name="mode" type="byte" visibility="public" enum="true" hwlevel="full">
+ <enum>
+ <value>OFF
+ <notes>No edge enhancement is applied.</notes></value>
+ <value>FAST
+ <notes>Apply edge enhancement at a quality level that does not slow down frame rate
+ relative to sensor output. It may be the same as OFF if edge enhancement will
+ slow down frame rate relative to sensor.</notes></value>
+ <value>HIGH_QUALITY
+ <notes>Apply high-quality edge enhancement, at a cost of possibly reduced output frame rate.
+ </notes></value>
+ <value optional="true">ZERO_SHUTTER_LAG
+ <notes>Edge enhancement is applied at different levels for different output streams,
+ based on resolution. Streams at maximum recording resolution (see {@link
+ ACameraDevice_createCaptureSession}) or below have
+ edge enhancement applied, while higher-resolution streams have no edge enhancement
+ applied. The level of edge enhancement for low-resolution streams is tuned so that
+ frame rate is not impacted, and the quality is equal to or better than FAST (since it
+ is only applied to lower-resolution outputs, quality may improve from FAST).
+
+ This mode is intended to be used by applications operating in a zero-shutter-lag mode
+ with YUV or PRIVATE reprocessing, where the application continuously captures
+ high-resolution intermediate buffers into a circular buffer, from which a final image is
+ produced via reprocessing when a user takes a picture. For such a use case, the
+ high-resolution buffers must not have edge enhancement applied to maximize efficiency of
+ preview and to avoid double-applying enhancement when reprocessed, while low-resolution
+ buffers (used for recording or preview, generally) need edge enhancement applied for
+ reasonable preview quality.
+
+ This mode is guaranteed to be supported by devices that support either the
+ YUV_REPROCESSING or PRIVATE_REPROCESSING capabilities
+ (android.request.availableCapabilities lists either of those capabilities) and it will
+ be the default mode for CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG template.
+ </notes></value>
+ </enum>
+ <description>Operation mode for edge
+ enhancement.</description>
+ <range>android.edge.availableEdgeModes</range>
+ <details>Edge enhancement improves sharpness and details in the captured image. OFF means
+ no enhancement will be applied by the camera device.
+
+ FAST/HIGH_QUALITY both mean camera device determined enhancement
+ will be applied. HIGH_QUALITY mode indicates that the
+ camera device will use the highest-quality enhancement algorithms,
+ even if it slows down capture rate. FAST means the camera device will
+ not slow down capture rate when applying edge enhancement. FAST may be the same as OFF if
+ edge enhancement will slow down capture rate. Every output stream will have a similar
+ amount of enhancement applied.
+
+ ZERO_SHUTTER_LAG is meant to be used by applications that maintain a continuous circular
+ buffer of high-resolution images during preview and reprocess image(s) from that buffer
+ into a final capture when triggered by the user. In this mode, the camera device applies
+ edge enhancement to low-resolution streams (below maximum recording resolution) to
+ maximize preview quality, but does not apply edge enhancement to high-resolution streams,
+ since those will be reprocessed later if necessary.
+
+ For YUV_REPROCESSING, these FAST/HIGH_QUALITY modes both mean that the camera
+ device will apply FAST/HIGH_QUALITY YUV-domain edge enhancement, respectively.
+ The camera device may adjust its internal edge enhancement parameters for best
+ image quality based on the android.reprocess.effectiveExposureFactor, if it is set.
+ </details>
+ <hal_details>
+ For YUV_REPROCESSING The HAL can use android.reprocess.effectiveExposureFactor to
+ adjust the internal edge enhancement reduction parameters appropriately to get the best
+ quality images.
+ </hal_details>
+ <tag id="V1" />
+ <tag id="REPROC" />
+ </entry>
+ <entry name="strength" type="byte">
+ <description>Control the amount of edge enhancement
+ applied to the images</description>
+ <units>1-10; 10 is maximum sharpening</units>
+ <tag id="FUTURE" />
+ </entry>
+ </controls>
+ <static>
+ <entry name="availableEdgeModes" type="byte" visibility="public"
+ type_notes="list of enums" container="array" typedef="enumList"
+ hwlevel="full">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of edge enhancement modes for android.edge.mode that are supported by this camera
+ device.
+ </description>
+ <range>Any value listed in android.edge.mode</range>
+ <details>
+ Full-capability camera devices must always support OFF; camera devices that support
+ YUV_REPROCESSING or PRIVATE_REPROCESSING will list ZERO_SHUTTER_LAG; all devices will
+ list FAST.
+ </details>
+ <hal_details>
+ HAL must support both FAST and HIGH_QUALITY if edge enhancement control is available
+ on the camera device, but the underlying implementation can be the same for both modes.
+ That is, if the highest quality implementation on the camera device does not slow down
+ capture rate, then FAST and HIGH_QUALITY will generate the same output.
+ </hal_details>
+ <tag id="V1" />
+ <tag id="REPROC" />
+ </entry>
+ </static>
+ <dynamic>
+ <clone entry="android.edge.mode" kind="controls">
+ <tag id="V1" />
+ <tag id="REPROC" />
+ </clone>
+ </dynamic>
+ </section>
+ <section name="flash">
+ <controls>
+ <entry name="firingPower" type="byte">
+ <description>Power for flash firing/torch</description>
+ <units>10 is max power; 0 is no flash. Linear</units>
+ <range>0 - 10</range>
+ <details>Power for snapshot may use a different scale than
+ for torch mode. Only one entry for torch mode will be
+ used</details>
+ <tag id="FUTURE" />
+ </entry>
+ <entry name="firingTime" type="int64">
+ <description>Firing time of flash relative to start of
+ exposure</description>
+ <units>nanoseconds</units>
+ <range>0-(exposure time-flash duration)</range>
+ <details>Clamped to (0, exposure time - flash
+ duration).</details>
+ <tag id="FUTURE" />
+ </entry>
+ <entry name="mode" type="byte" visibility="public" enum="true" hwlevel="legacy">
+ <enum>
+ <value>OFF
+ <notes>
+ Do not fire the flash for this capture.
+ </notes>
+ </value>
+ <value>SINGLE
+ <notes>
+ If the flash is available and charged, fire flash
+ for this capture.
+ </notes>
+ </value>
+ <value>TORCH
+ <notes>
+ Transition flash to continuously on.
+ </notes>
+ </value>
+ </enum>
+ <description>The desired mode for for the camera device's flash control.</description>
+ <details>
+ This control is only effective when flash unit is available
+ (`android.flash.info.available == true`).
+
+ When this control is used, the android.control.aeMode must be set to ON or OFF.
+ Otherwise, the camera device auto-exposure related flash control (ON_AUTO_FLASH,
+ ON_ALWAYS_FLASH, or ON_AUTO_FLASH_REDEYE) will override this control.
+
+ When set to OFF, the camera device will not fire flash for this capture.
+
+ When set to SINGLE, the camera device will fire flash regardless of the camera
+ device's auto-exposure routine's result. When used in still capture case, this
+ control should be used along with auto-exposure (AE) precapture metering sequence
+ (android.control.aePrecaptureTrigger), otherwise, the image may be incorrectly exposed.
+
+ When set to TORCH, the flash will be on continuously. This mode can be used
+ for use cases such as preview, auto-focus assist, still capture, or video recording.
+
+ The flash status will be reported by android.flash.state in the capture result metadata.
+ </details>
+ <tag id="BC" />
+ </entry>
+ </controls>
+ <static>
+ <namespace name="info">
+ <entry name="available" type="byte" visibility="public" enum="true"
+ typedef="boolean" hwlevel="legacy">
+ <enum>
+ <value>FALSE</value>
+ <value>TRUE</value>
+ </enum>
+ <description>Whether this camera device has a
+ flash unit.</description>
+ <details>
+ Will be `false` if no flash is available.
+
+ If there is no flash unit, none of the flash controls do
+ anything.</details>
+ <tag id="BC" />
+ </entry>
+ <entry name="chargeDuration" type="int64">
+ <description>Time taken before flash can fire
+ again</description>
+ <units>nanoseconds</units>
+ <range>0-1e9</range>
+ <details>1 second too long/too short for recharge? Should
+ this be power-dependent?</details>
+ <tag id="FUTURE" />
+ </entry>
+ </namespace>
+ <entry name="colorTemperature" type="byte">
+ <description>The x,y whitepoint of the
+ flash</description>
+ <units>pair of floats</units>
+ <range>0-1 for both</range>
+ <tag id="FUTURE" />
+ </entry>
+ <entry name="maxEnergy" type="byte">
+ <description>Max energy output of the flash for a full
+ power single flash</description>
+ <units>lumen-seconds</units>
+ <range>&gt;= 0</range>
+ <tag id="FUTURE" />
+ </entry>
+ </static>
+ <dynamic>
+ <clone entry="android.flash.firingPower" kind="controls">
+ </clone>
+ <clone entry="android.flash.firingTime" kind="controls">
+ </clone>
+ <clone entry="android.flash.mode" kind="controls"></clone>
+ <entry name="state" type="byte" visibility="public" enum="true"
+ hwlevel="limited">
+ <enum>
+ <value>UNAVAILABLE
+ <notes>No flash on camera.</notes></value>
+ <value>CHARGING
+ <notes>Flash is charging and cannot be fired.</notes></value>
+ <value>READY
+ <notes>Flash is ready to fire.</notes></value>
+ <value>FIRED
+ <notes>Flash fired for this capture.</notes></value>
+ <value>PARTIAL
+ <notes>Flash partially illuminated this frame.
+
+ This is usually due to the next or previous frame having
+ the flash fire, and the flash spilling into this capture
+ due to hardware limitations.</notes></value>
+ </enum>
+ <description>Current state of the flash
+ unit.</description>
+ <details>
+ When the camera device doesn't have flash unit
+ (i.e. `android.flash.info.available == false`), this state will always be UNAVAILABLE.
+ Other states indicate the current flash status.
+
+ In certain conditions, this will be available on LEGACY devices:
+
+ * Flash-less cameras always return UNAVAILABLE.
+ * Using android.control.aeMode `==` ON_ALWAYS_FLASH
+ will always return FIRED.
+ * Using android.flash.mode `==` TORCH
+ will always return FIRED.
+
+ In all other conditions the state will not be available on
+ LEGACY devices (i.e. it will be `null`).
+ </details>
+ </entry>
+ </dynamic>
+ </section>
+ <section name="hotPixel">
+ <controls>
+ <entry name="mode" type="byte" visibility="public" enum="true">
+ <enum>
+ <value>OFF
+ <notes>
+ No hot pixel correction is applied.
+
+ The frame rate must not be reduced relative to sensor raw output
+ for this option.
+
+ The hotpixel map may be returned in android.statistics.hotPixelMap.
+ </notes>
+ </value>
+ <value>FAST
+ <notes>
+ Hot pixel correction is applied, without reducing frame
+ rate relative to sensor raw output.
+
+ The hotpixel map may be returned in android.statistics.hotPixelMap.
+ </notes>
+ </value>
+ <value>HIGH_QUALITY
+ <notes>
+ High-quality hot pixel correction is applied, at a cost
+ of possibly reduced frame rate relative to sensor raw output.
+
+ The hotpixel map may be returned in android.statistics.hotPixelMap.
+ </notes>
+ </value>
+ </enum>
+ <description>
+ Operational mode for hot pixel correction.
+ </description>
+ <range>android.hotPixel.availableHotPixelModes</range>
+ <details>
+ Hotpixel correction interpolates out, or otherwise removes, pixels
+ that do not accurately measure the incoming light (i.e. pixels that
+ are stuck at an arbitrary value or are oversensitive).
+ </details>
+ <tag id="V1" />
+ <tag id="RAW" />
+ </entry>
+ </controls>
+ <static>
+ <entry name="availableHotPixelModes" type="byte" visibility="public"
+ type_notes="list of enums" container="array" typedef="enumList">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of hot pixel correction modes for android.hotPixel.mode that are supported by this
+ camera device.
+ </description>
+ <range>Any value listed in android.hotPixel.mode</range>
+ <details>
+ FULL mode camera devices will always support FAST.
+ </details>
+ <hal_details>
+ To avoid performance issues, there will be significantly fewer hot
+ pixels than actual pixels on the camera sensor.
+ HAL must support both FAST and HIGH_QUALITY if hot pixel correction control is available
+ on the camera device, but the underlying implementation can be the same for both modes.
+ That is, if the highest quality implementation on the camera device does not slow down
+ capture rate, then FAST and HIGH_QUALITY will generate the same output.
+ </hal_details>
+ <tag id="V1" />
+ <tag id="RAW" />
+ </entry>
+ </static>
+ <dynamic>
+ <clone entry="android.hotPixel.mode" kind="controls">
+ <tag id="V1" />
+ <tag id="RAW" />
+ </clone>
+ </dynamic>
+ </section>
+ <section name="jpeg">
+ <controls>
+ <entry name="gpsLocation" type="byte" visibility="java_public" synthetic="true"
+ typedef="location" hwlevel="legacy">
+ <description>
+ A location object to use when generating image GPS metadata.
+ </description>
+ <details>
+ Setting a location object in a request will include the GPS coordinates of the location
+ into any JPEG images captured based on the request. These coordinates can then be
+ viewed by anyone who receives the JPEG image.
+ </details>
+ </entry>
+ <entry name="gpsCoordinates" type="double" visibility="ndk_public"
+ type_notes="latitude, longitude, altitude. First two in degrees, the third in meters"
+ container="array" hwlevel="legacy">
+ <array>
+ <size>3</size>
+ </array>
+ <description>GPS coordinates to include in output JPEG
+ EXIF.</description>
+ <range>(-180 - 180], [-90,90], [-inf, inf]</range>
+ <tag id="BC" />
+ </entry>
+ <entry name="gpsProcessingMethod" type="byte" visibility="ndk_public"
+ typedef="string" hwlevel="legacy">
+ <description>32 characters describing GPS algorithm to
+ include in EXIF.</description>
+ <units>UTF-8 null-terminated string</units>
+ <tag id="BC" />
+ </entry>
+ <entry name="gpsTimestamp" type="int64" visibility="ndk_public" hwlevel="legacy">
+ <description>Time GPS fix was made to include in
+ EXIF.</description>
+ <units>UTC in seconds since January 1, 1970</units>
+ <tag id="BC" />
+ </entry>
+ <entry name="orientation" type="int32" visibility="public" hwlevel="legacy">
+ <description>The orientation for a JPEG image.</description>
+ <units>Degrees in multiples of 90</units>
+ <range>0, 90, 180, 270</range>
+ <details>
+ The clockwise rotation angle in degrees, relative to the orientation
+ to the camera, that the JPEG picture needs to be rotated by, to be viewed
+ upright.
+
+ Camera devices may either encode this value into the JPEG EXIF header, or
+ rotate the image data to match this orientation. When the image data is rotated,
+ the thumbnail data will also be rotated.
+
+ Note that this orientation is relative to the orientation of the camera sensor, given
+ by android.sensor.orientation.
+
+ To translate from the device orientation given by the Android sensor APIs, the following
+ sample code may be used:
+
+ private int getJpegOrientation(CameraCharacteristics c, int deviceOrientation) {
+ if (deviceOrientation == android.view.OrientationEventListener.ORIENTATION_UNKNOWN) return 0;
+ int sensorOrientation = c.get(CameraCharacteristics.SENSOR_ORIENTATION);
+
+ // Round device orientation to a multiple of 90
+ deviceOrientation = (deviceOrientation + 45) / 90 * 90;
+
+ // Reverse device orientation for front-facing cameras
+ boolean facingFront = c.get(CameraCharacteristics.LENS_FACING) == CameraCharacteristics.LENS_FACING_FRONT;
+ if (facingFront) deviceOrientation = -deviceOrientation;
+
+ // Calculate desired JPEG orientation relative to camera orientation to make
+ // the image upright relative to the device orientation
+ int jpegOrientation = (sensorOrientation + deviceOrientation + 360) % 360;
+
+ return jpegOrientation;
+ }
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="quality" type="byte" visibility="public" hwlevel="legacy">
+ <description>Compression quality of the final JPEG
+ image.</description>
+ <range>1-100; larger is higher quality</range>
+ <details>85-95 is typical usage range.</details>
+ <tag id="BC" />
+ </entry>
+ <entry name="thumbnailQuality" type="byte" visibility="public" hwlevel="legacy">
+ <description>Compression quality of JPEG
+ thumbnail.</description>
+ <range>1-100; larger is higher quality</range>
+ <tag id="BC" />
+ </entry>
+ <entry name="thumbnailSize" type="int32" visibility="public"
+ container="array" typedef="size" hwlevel="legacy">
+ <array>
+ <size>2</size>
+ </array>
+ <description>Resolution of embedded JPEG thumbnail.</description>
+ <range>android.jpeg.availableThumbnailSizes</range>
+ <details>When set to (0, 0) value, the JPEG EXIF will not contain thumbnail,
+ but the captured JPEG will still be a valid image.
+
+ For best results, when issuing a request for a JPEG image, the thumbnail size selected
+ should have the same aspect ratio as the main JPEG output.
+
+ If the thumbnail image aspect ratio differs from the JPEG primary image aspect
+ ratio, the camera device creates the thumbnail by cropping it from the primary image.
+ For example, if the primary image has 4:3 aspect ratio, the thumbnail image has
+ 16:9 aspect ratio, the primary image will be cropped vertically (letterbox) to
+ generate the thumbnail image. The thumbnail image will always have a smaller Field
+ Of View (FOV) than the primary image when aspect ratios differ.
+
+ When an android.jpeg.orientation of non-zero degree is requested,
+ the camera device will handle thumbnail rotation in one of the following ways:
+
+ * Set the
+ [EXIF orientation flag](https://developer.android.com/reference/android/media/ExifInterface.html#TAG_ORIENTATION)
+ and keep jpeg and thumbnail image data unrotated.
+ * Rotate the jpeg and thumbnail image data and not set
+ [EXIF orientation flag](https://developer.android.com/reference/android/media/ExifInterface.html#TAG_ORIENTATION).
+ In this case, LIMITED or FULL hardware level devices will report rotated thumnail size
+ in capture result, so the width and height will be interchanged if 90 or 270 degree
+ orientation is requested. LEGACY device will always report unrotated thumbnail size.
+ </details>
+ <hal_details>
+ The HAL must not squeeze or stretch the downscaled primary image to generate thumbnail.
+ The cropping must be done on the primary jpeg image rather than the sensor active array.
+ The stream cropping rule specified by "S5. Cropping" in camera3.h doesn't apply to the
+ thumbnail image cropping.
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ </controls>
+ <static>
+ <entry name="availableThumbnailSizes" type="int32" visibility="public"
+ container="array" typedef="size" hwlevel="legacy">
+ <array>
+ <size>2</size>
+ <size>n</size>
+ </array>
+ <description>List of JPEG thumbnail sizes for android.jpeg.thumbnailSize supported by this
+ camera device.</description>
+ <details>
+ This list will include at least one non-zero resolution, plus `(0,0)` for indicating no
+ thumbnail should be generated.
+
+ Below condiditions will be satisfied for this size list:
+
+ * The sizes will be sorted by increasing pixel area (width x height).
+ If several resolutions have the same area, they will be sorted by increasing width.
+ * The aspect ratio of the largest thumbnail size will be same as the
+ aspect ratio of largest JPEG output size in android.scaler.availableStreamConfigurations.
+ The largest size is defined as the size that has the largest pixel area
+ in a given size list.
+ * Each output JPEG size in android.scaler.availableStreamConfigurations will have at least
+ one corresponding size that has the same aspect ratio in availableThumbnailSizes,
+ and vice versa.
+ * All non-`(0, 0)` sizes will have non-zero widths and heights.</details>
+ <tag id="BC" />
+ </entry>
+ <entry name="maxSize" type="int32" visibility="system">
+ <description>Maximum size in bytes for the compressed
+ JPEG buffer</description>
+ <range>Must be large enough to fit any JPEG produced by
+ the camera</range>
+ <details>This is used for sizing the gralloc buffers for
+ JPEG</details>
+ </entry>
+ </static>
+ <dynamic>
+ <clone entry="android.jpeg.gpsLocation" kind="controls">
+ </clone>
+ <clone entry="android.jpeg.gpsCoordinates" kind="controls">
+ </clone>
+ <clone entry="android.jpeg.gpsProcessingMethod"
+ kind="controls"></clone>
+ <clone entry="android.jpeg.gpsTimestamp" kind="controls">
+ </clone>
+ <clone entry="android.jpeg.orientation" kind="controls">
+ </clone>
+ <clone entry="android.jpeg.quality" kind="controls">
+ </clone>
+ <entry name="size" type="int32">
+ <description>The size of the compressed JPEG image, in
+ bytes</description>
+ <range>&gt;= 0</range>
+ <details>If no JPEG output is produced for the request,
+ this must be 0.
+
+ Otherwise, this describes the real size of the compressed
+ JPEG image placed in the output stream. More specifically,
+ if android.jpeg.maxSize = 1000000, and a specific capture
+ has android.jpeg.size = 500000, then the output buffer from
+ the JPEG stream will be 1000000 bytes, of which the first
+ 500000 make up the real data.</details>
+ <tag id="FUTURE" />
+ </entry>
+ <clone entry="android.jpeg.thumbnailQuality"
+ kind="controls"></clone>
+ <clone entry="android.jpeg.thumbnailSize" kind="controls">
+ </clone>
+ </dynamic>
+ </section>
+ <section name="lens">
+ <controls>
+ <entry name="aperture" type="float" visibility="public" hwlevel="full">
+ <description>The desired lens aperture size, as a ratio of lens focal length to the
+ effective aperture diameter.</description>
+ <units>The f-number (f/N)</units>
+ <range>android.lens.info.availableApertures</range>
+ <details>Setting this value is only supported on the camera devices that have a variable
+ aperture lens.
+
+ When this is supported and android.control.aeMode is OFF,
+ this can be set along with android.sensor.exposureTime,
+ android.sensor.sensitivity, and android.sensor.frameDuration
+ to achieve manual exposure control.
+
+ The requested aperture value may take several frames to reach the
+ requested value; the camera device will report the current (intermediate)
+ aperture size in capture result metadata while the aperture is changing.
+ While the aperture is still changing, android.lens.state will be set to MOVING.
+
+ When this is supported and android.control.aeMode is one of
+ the ON modes, this will be overridden by the camera device
+ auto-exposure algorithm, the overridden values are then provided
+ back to the user in the corresponding result.</details>
+ <tag id="V1" />
+ </entry>
+ <entry name="filterDensity" type="float" visibility="public" hwlevel="full">
+ <description>
+ The desired setting for the lens neutral density filter(s).
+ </description>
+ <units>Exposure Value (EV)</units>
+ <range>android.lens.info.availableFilterDensities</range>
+ <details>
+ This control will not be supported on most camera devices.
+
+ Lens filters are typically used to lower the amount of light the
+ sensor is exposed to (measured in steps of EV). As used here, an EV
+ step is the standard logarithmic representation, which are
+ non-negative, and inversely proportional to the amount of light
+ hitting the sensor. For example, setting this to 0 would result
+ in no reduction of the incoming light, and setting this to 2 would
+ mean that the filter is set to reduce incoming light by two stops
+ (allowing 1/4 of the prior amount of light to the sensor).
+
+ It may take several frames before the lens filter density changes
+ to the requested value. While the filter density is still changing,
+ android.lens.state will be set to MOVING.
+ </details>
+ <tag id="V1" />
+ </entry>
+ <entry name="focalLength" type="float" visibility="public" hwlevel="legacy">
+ <description>
+ The desired lens focal length; used for optical zoom.
+ </description>
+ <units>Millimeters</units>
+ <range>android.lens.info.availableFocalLengths</range>
+ <details>
+ This setting controls the physical focal length of the camera
+ device's lens. Changing the focal length changes the field of
+ view of the camera device, and is usually used for optical zoom.
+
+ Like android.lens.focusDistance and android.lens.aperture, this
+ setting won't be applied instantaneously, and it may take several
+ frames before the lens can change to the requested focal length.
+ While the focal length is still changing, android.lens.state will
+ be set to MOVING.
+
+ Optical zoom will not be supported on most devices.
+ </details>
+ <tag id="V1" />
+ </entry>
+ <entry name="focusDistance" type="float" visibility="public" hwlevel="full">
+ <description>Desired distance to plane of sharpest focus,
+ measured from frontmost surface of the lens.</description>
+ <units>See android.lens.info.focusDistanceCalibration for details</units>
+ <range>&gt;= 0</range>
+ <details>
+ This control can be used for setting manual focus, on devices that support
+ the MANUAL_SENSOR capability and have a variable-focus lens (see
+ android.lens.info.minimumFocusDistance).
+
+ A value of `0.0f` means infinity focus. The value set will be clamped to
+ `[0.0f, android.lens.info.minimumFocusDistance]`.
+
+ Like android.lens.focalLength, this setting won't be applied
+ instantaneously, and it may take several frames before the lens
+ can move to the requested focus distance. While the lens is still moving,
+ android.lens.state will be set to MOVING.
+
+ LEGACY devices support at most setting this to `0.0f`
+ for infinity focus.
+ </details>
+ <tag id="BC" />
+ <tag id="V1" />
+ </entry>
+ <entry name="opticalStabilizationMode" type="byte" visibility="public"
+ enum="true" hwlevel="limited">
+ <enum>
+ <value>OFF
+ <notes>Optical stabilization is unavailable.</notes>
+ </value>
+ <value optional="true">ON
+ <notes>Optical stabilization is enabled.</notes>
+ </value>
+ </enum>
+ <description>
+ Sets whether the camera device uses optical image stabilization (OIS)
+ when capturing images.
+ </description>
+ <range>android.lens.info.availableOpticalStabilization</range>
+ <details>
+ OIS is used to compensate for motion blur due to small
+ movements of the camera during capture. Unlike digital image
+ stabilization (android.control.videoStabilizationMode), OIS
+ makes use of mechanical elements to stabilize the camera
+ sensor, and thus allows for longer exposure times before
+ camera shake becomes apparent.
+
+ Switching between different optical stabilization modes may take several
+ frames to initialize, the camera device will report the current mode in
+ capture result metadata. For example, When "ON" mode is requested, the
+ optical stabilization modes in the first several capture results may still
+ be "OFF", and it will become "ON" when the initialization is done.
+
+ If a camera device supports both OIS and digital image stabilization
+ (android.control.videoStabilizationMode), turning both modes on may produce undesirable
+ interaction, so it is recommended not to enable both at the same time.
+
+ Not all devices will support OIS; see
+ android.lens.info.availableOpticalStabilization for
+ available controls.
+ </details>
+ <tag id="V1" />
+ </entry>
+ </controls>
+ <static>
+ <namespace name="info">
+ <entry name="availableApertures" type="float" visibility="public"
+ container="array" hwlevel="full">
+ <array>
+ <size>n</size>
+ </array>
+ <description>List of aperture size values for android.lens.aperture that are
+ supported by this camera device.</description>
+ <units>The aperture f-number</units>
+ <details>If the camera device doesn't support a variable lens aperture,
+ this list will contain only one value, which is the fixed aperture size.
+
+ If the camera device supports a variable aperture, the aperture values
+ in this list will be sorted in ascending order.</details>
+ <tag id="V1" />
+ </entry>
+ <entry name="availableFilterDensities" type="float" visibility="public"
+ container="array" hwlevel="full">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of neutral density filter values for
+ android.lens.filterDensity that are supported by this camera device.
+ </description>
+ <units>Exposure value (EV)</units>
+ <range>
+ Values are &gt;= 0
+ </range>
+ <details>
+ If a neutral density filter is not supported by this camera device,
+ this list will contain only 0. Otherwise, this list will include every
+ filter density supported by the camera device, in ascending order.
+ </details>
+ <tag id="V1" />
+ </entry>
+ <entry name="availableFocalLengths" type="float" visibility="public"
+ type_notes="The list of available focal lengths"
+ container="array" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of focal lengths for android.lens.focalLength that are supported by this camera
+ device.
+ </description>
+ <units>Millimeters</units>
+ <range>
+ Values are &gt; 0
+ </range>
+ <details>
+ If optical zoom is not supported, this list will only contain
+ a single value corresponding to the fixed focal length of the
+ device. Otherwise, this list will include every focal length supported
+ by the camera device, in ascending order.
+ </details>
+ <tag id="BC" />
+ <tag id="V1" />
+ </entry>
+ <entry name="availableOpticalStabilization" type="byte"
+ visibility="public" type_notes="list of enums" container="array"
+ typedef="enumList" hwlevel="limited">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of optical image stabilization (OIS) modes for
+ android.lens.opticalStabilizationMode that are supported by this camera device.
+ </description>
+ <range>Any value listed in android.lens.opticalStabilizationMode</range>
+ <details>
+ If OIS is not supported by a given camera device, this list will
+ contain only OFF.
+ </details>
+ <tag id="V1" />
+ </entry>
+ <entry name="hyperfocalDistance" type="float" visibility="public" optional="true"
+ hwlevel="limited">
+ <description>Hyperfocal distance for this lens.</description>
+ <units>See android.lens.info.focusDistanceCalibration for details</units>
+ <range>If lens is fixed focus, &gt;= 0. If lens has focuser unit, the value is
+ within `(0.0f, android.lens.info.minimumFocusDistance]`</range>
+ <details>
+ If the lens is not fixed focus, the camera device will report this
+ field when android.lens.info.focusDistanceCalibration is APPROXIMATE or CALIBRATED.
+ </details>
+ </entry>
+ <entry name="minimumFocusDistance" type="float" visibility="public" optional="true"
+ hwlevel="limited">
+ <description>Shortest distance from frontmost surface
+ of the lens that can be brought into sharp focus.</description>
+ <units>See android.lens.info.focusDistanceCalibration for details</units>
+ <range>&gt;= 0</range>
+ <details>If the lens is fixed-focus, this will be
+ 0.</details>
+ <hal_details>Mandatory for FULL devices; LIMITED devices
+ must always set this value to 0 for fixed-focus; and may omit
+ the minimum focus distance otherwise.
+
+ This field is also mandatory for all devices advertising
+ the MANUAL_SENSOR capability.</hal_details>
+ <tag id="V1" />
+ </entry>
+ <entry name="shadingMapSize" type="int32" visibility="ndk_public"
+ type_notes="width and height (N, M) of lens shading map provided by the camera device."
+ container="array" typedef="size" hwlevel="full">
+ <array>
+ <size>2</size>
+ </array>
+ <description>Dimensions of lens shading map.</description>
+ <range>Both values &gt;= 1</range>
+ <details>
+ The map should be on the order of 30-40 rows and columns, and
+ must be smaller than 64x64.
+ </details>
+ <tag id="V1" />
+ </entry>
+ <entry name="focusDistanceCalibration" type="byte" visibility="public"
+ enum="true" hwlevel="limited">
+ <enum>
+ <value>UNCALIBRATED
+ <notes>
+ The lens focus distance is not accurate, and the units used for
+ android.lens.focusDistance do not correspond to any physical units.
+
+ Setting the lens to the same focus distance on separate occasions may
+ result in a different real focus distance, depending on factors such
+ as the orientation of the device, the age of the focusing mechanism,
+ and the device temperature. The focus distance value will still be
+ in the range of `[0, android.lens.info.minimumFocusDistance]`, where 0
+ represents the farthest focus.
+ </notes>
+ </value>
+ <value>APPROXIMATE
+ <notes>
+ The lens focus distance is measured in diopters.
+
+ However, setting the lens to the same focus distance
+ on separate occasions may result in a different real
+ focus distance, depending on factors such as the
+ orientation of the device, the age of the focusing
+ mechanism, and the device temperature.
+ </notes>
+ </value>
+ <value>CALIBRATED
+ <notes>
+ The lens focus distance is measured in diopters, and
+ is calibrated.
+
+ The lens mechanism is calibrated so that setting the
+ same focus distance is repeatable on multiple
+ occasions with good accuracy, and the focus distance
+ corresponds to the real physical distance to the plane
+ of best focus.
+ </notes>
+ </value>
+ </enum>
+ <description>The lens focus distance calibration quality.</description>
+ <details>
+ The lens focus distance calibration quality determines the reliability of
+ focus related metadata entries, i.e. android.lens.focusDistance,
+ android.lens.focusRange, android.lens.info.hyperfocalDistance, and
+ android.lens.info.minimumFocusDistance.
+
+ APPROXIMATE and CALIBRATED devices report the focus metadata in
+ units of diopters (1/meter), so `0.0f` represents focusing at infinity,
+ and increasing positive numbers represent focusing closer and closer
+ to the camera device. The focus distance control also uses diopters
+ on these devices.
+
+ UNCALIBRATED devices do not use units that are directly comparable
+ to any real physical measurement, but `0.0f` still represents farthest
+ focus, and android.lens.info.minimumFocusDistance represents the
+ nearest focus the device can achieve.
+ </details>
+ <hal_details>
+ For devices advertise APPROXIMATE quality or higher, diopters 0 (infinity
+ focus) must work. When autofocus is disabled (android.control.afMode == OFF)
+ and the lens focus distance is set to 0 diopters
+ (android.lens.focusDistance == 0), the lens will move to focus at infinity
+ and is stably focused at infinity even if the device tilts. It may take the
+ lens some time to move; during the move the lens state should be MOVING and
+ the output diopter value should be changing toward 0.
+ </hal_details>
+ <tag id="V1" />
+ </entry>
+ </namespace>
+ <entry name="facing" type="byte" visibility="public" enum="true" hwlevel="legacy">
+ <enum>
+ <value>FRONT
+ <notes>
+ The camera device faces the same direction as the device's screen.
+ </notes></value>
+ <value>BACK
+ <notes>
+ The camera device faces the opposite direction as the device's screen.
+ </notes></value>
+ <value>EXTERNAL
+ <notes>
+ The camera device is an external camera, and has no fixed facing relative to the
+ device's screen.
+ </notes></value>
+ </enum>
+ <description>Direction the camera faces relative to
+ device screen.</description>
+ </entry>
+ <entry name="poseRotation" type="float" visibility="public"
+ container="array">
+ <array>
+ <size>4</size>
+ </array>
+ <description>
+ The orientation of the camera relative to the sensor
+ coordinate system.
+ </description>
+ <units>
+ Quaternion coefficients
+ </units>
+ <details>
+ The four coefficients that describe the quaternion
+ rotation from the Android sensor coordinate system to a
+ camera-aligned coordinate system where the X-axis is
+ aligned with the long side of the image sensor, the Y-axis
+ is aligned with the short side of the image sensor, and
+ the Z-axis is aligned with the optical axis of the sensor.
+
+ To convert from the quaternion coefficients `(x,y,z,w)`
+ to the axis of rotation `(a_x, a_y, a_z)` and rotation
+ amount `theta`, the following formulas can be used:
+
+ theta = 2 * acos(w)
+ a_x = x / sin(theta/2)
+ a_y = y / sin(theta/2)
+ a_z = z / sin(theta/2)
+
+ To create a 3x3 rotation matrix that applies the rotation
+ defined by this quaternion, the following matrix can be
+ used:
+
+ R = [ 1 - 2y^2 - 2z^2, 2xy - 2zw, 2xz + 2yw,
+ 2xy + 2zw, 1 - 2x^2 - 2z^2, 2yz - 2xw,
+ 2xz - 2yw, 2yz + 2xw, 1 - 2x^2 - 2y^2 ]
+
+ This matrix can then be used to apply the rotation to a
+ column vector point with
+
+ `p' = Rp`
+
+ where `p` is in the device sensor coordinate system, and
+ `p'` is in the camera-oriented coordinate system.
+ </details>
+ <tag id="DEPTH" />
+ </entry>
+ <entry name="poseTranslation" type="float" visibility="public"
+ container="array">
+ <array>
+ <size>3</size>
+ </array>
+ <description>Position of the camera optical center.</description>
+ <units>Meters</units>
+ <details>
+ The position of the camera device's lens optical center,
+ as a three-dimensional vector `(x,y,z)`, relative to the
+ optical center of the largest camera device facing in the
+ same direction as this camera, in the
+ [Android sensor coordinate axes](https://developer.android.com/reference/android/hardware/SensorEvent.html).
+ Note that only the axis definitions are shared with
+ the sensor coordinate system, but not the origin.
+
+ If this device is the largest or only camera device with a
+ given facing, then this position will be `(0, 0, 0)`; a
+ camera device with a lens optical center located 3 cm from
+ the main sensor along the +X axis (to the right from the
+ user's perspective) will report `(0.03, 0, 0)`.
+
+ To transform a pixel coordinates between two cameras
+ facing the same direction, first the source camera
+ android.lens.radialDistortion must be corrected for. Then
+ the source camera android.lens.intrinsicCalibration needs
+ to be applied, followed by the android.lens.poseRotation
+ of the source camera, the translation of the source camera
+ relative to the destination camera, the
+ android.lens.poseRotation of the destination camera, and
+ finally the inverse of android.lens.intrinsicCalibration
+ of the destination camera. This obtains a
+ radial-distortion-free coordinate in the destination
+ camera pixel coordinates.
+
+ To compare this against a real image from the destination
+ camera, the destination camera image then needs to be
+ corrected for radial distortion before comparison or
+ sampling.
+ </details>
+ <tag id="DEPTH" />
+ </entry>
+ </static>
+ <dynamic>
+ <clone entry="android.lens.aperture" kind="controls">
+ <tag id="V1" />
+ </clone>
+ <clone entry="android.lens.filterDensity" kind="controls">
+ <tag id="V1" />
+ </clone>
+ <clone entry="android.lens.focalLength" kind="controls">
+ <tag id="BC" />
+ </clone>
+ <clone entry="android.lens.focusDistance" kind="controls">
+ <details>Should be zero for fixed-focus cameras</details>
+ <tag id="BC" />
+ </clone>
+ <entry name="focusRange" type="float" visibility="public"
+ type_notes="Range of scene distances that are in focus"
+ container="array" typedef="pairFloatFloat" hwlevel="limited">
+ <array>
+ <size>2</size>
+ </array>
+ <description>The range of scene distances that are in
+ sharp focus (depth of field).</description>
+ <units>A pair of focus distances in diopters: (near,
+ far); see android.lens.info.focusDistanceCalibration for details.</units>
+ <range>&gt;=0</range>
+ <details>If variable focus not supported, can still report
+ fixed depth of field range</details>
+ <tag id="BC" />
+ </entry>
+ <clone entry="android.lens.opticalStabilizationMode"
+ kind="controls">
+ <tag id="V1" />
+ </clone>
+ <entry name="state" type="byte" visibility="public" enum="true" hwlevel="limited">
+ <enum>
+ <value>STATIONARY
+ <notes>
+ The lens parameters (android.lens.focalLength, android.lens.focusDistance,
+ android.lens.filterDensity and android.lens.aperture) are not changing.
+ </notes>
+ </value>
+ <value>MOVING
+ <notes>
+ One or several of the lens parameters
+ (android.lens.focalLength, android.lens.focusDistance,
+ android.lens.filterDensity or android.lens.aperture) is
+ currently changing.
+ </notes>
+ </value>
+ </enum>
+ <description>Current lens status.</description>
+ <details>
+ For lens parameters android.lens.focalLength, android.lens.focusDistance,
+ android.lens.filterDensity and android.lens.aperture, when changes are requested,
+ they may take several frames to reach the requested values. This state indicates
+ the current status of the lens parameters.
+
+ When the state is STATIONARY, the lens parameters are not changing. This could be
+ either because the parameters are all fixed, or because the lens has had enough
+ time to reach the most recently-requested values.
+ If all these lens parameters are not changable for a camera device, as listed below:
+
+ * Fixed focus (`android.lens.info.minimumFocusDistance == 0`), which means
+ android.lens.focusDistance parameter will always be 0.
+ * Fixed focal length (android.lens.info.availableFocalLengths contains single value),
+ which means the optical zoom is not supported.
+ * No ND filter (android.lens.info.availableFilterDensities contains only 0).
+ * Fixed aperture (android.lens.info.availableApertures contains single value).
+
+ Then this state will always be STATIONARY.
+
+ When the state is MOVING, it indicates that at least one of the lens parameters
+ is changing.
+ </details>
+ <tag id="V1" />
+ </entry>
+ <clone entry="android.lens.poseRotation" kind="static">
+ </clone>
+ <clone entry="android.lens.poseTranslation" kind="static">
+ </clone>
+ </dynamic>
+ <static>
+ <entry name="intrinsicCalibration" type="float" visibility="public"
+ container="array">
+ <array>
+ <size>5</size>
+ </array>
+ <description>
+ The parameters for this camera device's intrinsic
+ calibration.
+ </description>
+ <units>
+ Pixels in the
+ android.sensor.info.preCorrectionActiveArraySize
+ coordinate system.
+ </units>
+ <details>
+ The five calibration parameters that describe the
+ transform from camera-centric 3D coordinates to sensor
+ pixel coordinates:
+
+ [f_x, f_y, c_x, c_y, s]
+
+ Where `f_x` and `f_y` are the horizontal and vertical
+ focal lengths, `[c_x, c_y]` is the position of the optical
+ axis, and `s` is a skew parameter for the sensor plane not
+ being aligned with the lens plane.
+
+ These are typically used within a transformation matrix K:
+
+ K = [ f_x, s, c_x,
+ 0, f_y, c_y,
+ 0 0, 1 ]
+
+ which can then be combined with the camera pose rotation
+ `R` and translation `t` (android.lens.poseRotation and
+ android.lens.poseTranslation, respective) to calculate the
+ complete transform from world coordinates to pixel
+ coordinates:
+
+ P = [ K 0 * [ R t
+ 0 1 ] 0 1 ]
+
+ and with `p_w` being a point in the world coordinate system
+ and `p_s` being a point in the camera active pixel array
+ coordinate system, and with the mapping including the
+ homogeneous division by z:
+
+ p_h = (x_h, y_h, z_h) = P p_w
+ p_s = p_h / z_h
+
+ so `[x_s, y_s]` is the pixel coordinates of the world
+ point, `z_s = 1`, and `w_s` is a measurement of disparity
+ (depth) in pixel coordinates.
+
+ Note that the coordinate system for this transform is the
+ android.sensor.info.preCorrectionActiveArraySize system,
+ where `(0,0)` is the top-left of the
+ preCorrectionActiveArraySize rectangle. Once the pose and
+ intrinsic calibration transforms have been applied to a
+ world point, then the android.lens.radialDistortion
+ transform needs to be applied, and the result adjusted to
+ be in the android.sensor.info.activeArraySize coordinate
+ system (where `(0, 0)` is the top-left of the
+ activeArraySize rectangle), to determine the final pixel
+ coordinate of the world point for processed (non-RAW)
+ output buffers.
+ </details>
+ <tag id="DEPTH" />
+ </entry>
+ <entry name="radialDistortion" type="float" visibility="public"
+ container="array">
+ <array>
+ <size>6</size>
+ </array>
+ <description>
+ The correction coefficients to correct for this camera device's
+ radial and tangential lens distortion.
+ </description>
+ <units>
+ Unitless coefficients.
+ </units>
+ <details>
+ Four radial distortion coefficients `[kappa_0, kappa_1, kappa_2,
+ kappa_3]` and two tangential distortion coefficients
+ `[kappa_4, kappa_5]` that can be used to correct the
+ lens's geometric distortion with the mapping equations:
+
+ x_c = x_i * ( kappa_0 + kappa_1 * r^2 + kappa_2 * r^4 + kappa_3 * r^6 ) +
+ kappa_4 * (2 * x_i * y_i) + kappa_5 * ( r^2 + 2 * x_i^2 )
+ y_c = y_i * ( kappa_0 + kappa_1 * r^2 + kappa_2 * r^4 + kappa_3 * r^6 ) +
+ kappa_5 * (2 * x_i * y_i) + kappa_4 * ( r^2 + 2 * y_i^2 )
+
+ Here, `[x_c, y_c]` are the coordinates to sample in the
+ input image that correspond to the pixel values in the
+ corrected image at the coordinate `[x_i, y_i]`:
+
+ correctedImage(x_i, y_i) = sample_at(x_c, y_c, inputImage)
+
+ The pixel coordinates are defined in a normalized
+ coordinate system related to the
+ android.lens.intrinsicCalibration calibration fields.
+ Both `[x_i, y_i]` and `[x_c, y_c]` have `(0,0)` at the
+ lens optical center `[c_x, c_y]`. The maximum magnitudes
+ of both x and y coordinates are normalized to be 1 at the
+ edge further from the optical center, so the range
+ for both dimensions is `-1 <= x <= 1`.
+
+ Finally, `r` represents the radial distance from the
+ optical center, `r^2 = x_i^2 + y_i^2`, and its magnitude
+ is therefore no larger than `|r| <= sqrt(2)`.
+
+ The distortion model used is the Brown-Conrady model.
+ </details>
+ <tag id="DEPTH" />
+ </entry>
+ </static>
+ <dynamic>
+ <clone entry="android.lens.intrinsicCalibration" kind="static">
+ </clone>
+ <clone entry="android.lens.radialDistortion" kind="static">
+ </clone>
+ </dynamic>
+ </section>
+ <section name="noiseReduction">
+ <controls>
+ <entry name="mode" type="byte" visibility="public" enum="true" hwlevel="full">
+ <enum>
+ <value>OFF
+ <notes>No noise reduction is applied.</notes></value>
+ <value>FAST
+ <notes>Noise reduction is applied without reducing frame rate relative to sensor
+ output. It may be the same as OFF if noise reduction will reduce frame rate
+ relative to sensor.</notes></value>
+ <value>HIGH_QUALITY
+ <notes>High-quality noise reduction is applied, at the cost of possibly reduced frame
+ rate relative to sensor output.</notes></value>
+ <value optional="true">MINIMAL
+ <notes>MINIMAL noise reduction is applied without reducing frame rate relative to
+ sensor output. </notes></value>
+ <value optional="true">ZERO_SHUTTER_LAG
+
+ <notes>Noise reduction is applied at different levels for different output streams,
+ based on resolution. Streams at maximum recording resolution (see {@link
+ ACameraDevice_createCaptureSession}) or below have noise
+ reduction applied, while higher-resolution streams have MINIMAL (if supported) or no
+ noise reduction applied (if MINIMAL is not supported.) The degree of noise reduction
+ for low-resolution streams is tuned so that frame rate is not impacted, and the quality
+ is equal to or better than FAST (since it is only applied to lower-resolution outputs,
+ quality may improve from FAST).
+
+ This mode is intended to be used by applications operating in a zero-shutter-lag mode
+ with YUV or PRIVATE reprocessing, where the application continuously captures
+ high-resolution intermediate buffers into a circular buffer, from which a final image is
+ produced via reprocessing when a user takes a picture. For such a use case, the
+ high-resolution buffers must not have noise reduction applied to maximize efficiency of
+ preview and to avoid over-applying noise filtering when reprocessing, while
+ low-resolution buffers (used for recording or preview, generally) need noise reduction
+ applied for reasonable preview quality.
+
+ This mode is guaranteed to be supported by devices that support either the
+ YUV_REPROCESSING or PRIVATE_REPROCESSING capabilities
+ (android.request.availableCapabilities lists either of those capabilities) and it will
+ be the default mode for CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG template.
+ </notes></value>
+ </enum>
+ <description>Mode of operation for the noise reduction algorithm.</description>
+ <range>android.noiseReduction.availableNoiseReductionModes</range>
+ <details>The noise reduction algorithm attempts to improve image quality by removing
+ excessive noise added by the capture process, especially in dark conditions.
+
+ OFF means no noise reduction will be applied by the camera device, for both raw and
+ YUV domain.
+
+ MINIMAL means that only sensor raw domain basic noise reduction is enabled ,to remove
+ demosaicing or other processing artifacts. For YUV_REPROCESSING, MINIMAL is same as OFF.
+ This mode is optional, may not be support by all devices. The application should check
+ android.noiseReduction.availableNoiseReductionModes before using it.
+
+ FAST/HIGH_QUALITY both mean camera device determined noise filtering
+ will be applied. HIGH_QUALITY mode indicates that the camera device
+ will use the highest-quality noise filtering algorithms,
+ even if it slows down capture rate. FAST means the camera device will not
+ slow down capture rate when applying noise filtering. FAST may be the same as MINIMAL if
+ MINIMAL is listed, or the same as OFF if any noise filtering will slow down capture rate.
+ Every output stream will have a similar amount of enhancement applied.
+
+ ZERO_SHUTTER_LAG is meant to be used by applications that maintain a continuous circular
+ buffer of high-resolution images during preview and reprocess image(s) from that buffer
+ into a final capture when triggered by the user. In this mode, the camera device applies
+ noise reduction to low-resolution streams (below maximum recording resolution) to maximize
+ preview quality, but does not apply noise reduction to high-resolution streams, since
+ those will be reprocessed later if necessary.
+
+ For YUV_REPROCESSING, these FAST/HIGH_QUALITY modes both mean that the camera device
+ will apply FAST/HIGH_QUALITY YUV domain noise reduction, respectively. The camera device
+ may adjust the noise reduction parameters for best image quality based on the
+ android.reprocess.effectiveExposureFactor if it is set.
+ </details>
+ <hal_details>
+ For YUV_REPROCESSING The HAL can use android.reprocess.effectiveExposureFactor to
+ adjust the internal noise reduction parameters appropriately to get the best quality
+ images.
+ </hal_details>
+ <tag id="V1" />
+ <tag id="REPROC" />
+ </entry>
+ <entry name="strength" type="byte">
+ <description>Control the amount of noise reduction
+ applied to the images</description>
+ <units>1-10; 10 is max noise reduction</units>
+ <range>1 - 10</range>
+ <tag id="FUTURE" />
+ </entry>
+ </controls>
+ <static>
+ <entry name="availableNoiseReductionModes" type="byte" visibility="public"
+ type_notes="list of enums" container="array" typedef="enumList" hwlevel="limited">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of noise reduction modes for android.noiseReduction.mode that are supported
+ by this camera device.
+ </description>
+ <range>Any value listed in android.noiseReduction.mode</range>
+ <details>
+ Full-capability camera devices will always support OFF and FAST.
+
+ Camera devices that support YUV_REPROCESSING or PRIVATE_REPROCESSING will support
+ ZERO_SHUTTER_LAG.
+
+ Legacy-capability camera devices will only support FAST mode.
+ </details>
+ <hal_details>
+ HAL must support both FAST and HIGH_QUALITY if noise reduction control is available
+ on the camera device, but the underlying implementation can be the same for both modes.
+ That is, if the highest quality implementation on the camera device does not slow down
+ capture rate, then FAST and HIGH_QUALITY will generate the same output.
+ </hal_details>
+ <tag id="V1" />
+ <tag id="REPROC" />
+ </entry>
+ </static>
+ <dynamic>
+ <clone entry="android.noiseReduction.mode" kind="controls">
+ <tag id="V1" />
+ <tag id="REPROC" />
+ </clone>
+ </dynamic>
+ </section>
+ <section name="quirks">
+ <static>
+ <entry name="meteringCropRegion" type="byte" visibility="system" deprecated="true" optional="true">
+ <description>If set to 1, the camera service does not
+ scale 'normalized' coordinates with respect to the crop
+ region. This applies to metering input (a{e,f,wb}Region
+ and output (face rectangles).</description>
+ <details>Normalized coordinates refer to those in the
+ (-1000,1000) range mentioned in the
+ android.hardware.Camera API.
+
+ HAL implementations should instead always use and emit
+ sensor array-relative coordinates for all region data. Does
+ not need to be listed in static metadata. Support will be
+ removed in future versions of camera service.</details>
+ </entry>
+ <entry name="triggerAfWithAuto" type="byte" visibility="system" deprecated="true" optional="true">
+ <description>If set to 1, then the camera service always
+ switches to FOCUS_MODE_AUTO before issuing a AF
+ trigger.</description>
+ <details>HAL implementations should implement AF trigger
+ modes for AUTO, MACRO, CONTINUOUS_FOCUS, and
+ CONTINUOUS_PICTURE modes instead of using this flag. Does
+ not need to be listed in static metadata. Support will be
+ removed in future versions of camera service</details>
+ </entry>
+ <entry name="useZslFormat" type="byte" visibility="system" deprecated="true" optional="true">
+ <description>If set to 1, the camera service uses
+ CAMERA2_PIXEL_FORMAT_ZSL instead of
+ HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED for the zero
+ shutter lag stream</description>
+ <details>HAL implementations should use gralloc usage flags
+ to determine that a stream will be used for
+ zero-shutter-lag, instead of relying on an explicit
+ format setting. Does not need to be listed in static
+ metadata. Support will be removed in future versions of
+ camera service.</details>
+ </entry>
+ <entry name="usePartialResult" type="byte" visibility="hidden" deprecated="true" optional="true">
+ <description>
+ If set to 1, the HAL will always split result
+ metadata for a single capture into multiple buffers,
+ returned using multiple process_capture_result calls.
+ </description>
+ <details>
+ Does not need to be listed in static
+ metadata. Support for partial results will be reworked in
+ future versions of camera service. This quirk will stop
+ working at that point; DO NOT USE without careful
+ consideration of future support.
+ </details>
+ <hal_details>
+ Refer to `camera3_capture_result::partial_result`
+ for information on how to implement partial results.
+ </hal_details>
+ </entry>
+ </static>
+ <dynamic>
+ <entry name="partialResult" type="byte" visibility="hidden" deprecated="true" optional="true" enum="true" typedef="boolean">
+ <enum>
+ <value>FINAL
+ <notes>The last or only metadata result buffer
+ for this capture.</notes>
+ </value>
+ <value>PARTIAL
+ <notes>A partial buffer of result metadata for this
+ capture. More result buffers for this capture will be sent
+ by the camera device, the last of which will be marked
+ FINAL.</notes>
+ </value>
+ </enum>
+ <description>
+ Whether a result given to the framework is the
+ final one for the capture, or only a partial that contains a
+ subset of the full set of dynamic metadata
+ values.</description>
+ <range>Optional. Default value is FINAL.</range>
+ <details>
+ The entries in the result metadata buffers for a
+ single capture may not overlap, except for this entry. The
+ FINAL buffers must retain FIFO ordering relative to the
+ requests that generate them, so the FINAL buffer for frame 3 must
+ always be sent to the framework after the FINAL buffer for frame 2, and
+ before the FINAL buffer for frame 4. PARTIAL buffers may be returned
+ in any order relative to other frames, but all PARTIAL buffers for a given
+ capture must arrive before the FINAL buffer for that capture. This entry may
+ only be used by the camera device if quirks.usePartialResult is set to 1.
+ </details>
+ <hal_details>
+ Refer to `camera3_capture_result::partial_result`
+ for information on how to implement partial results.
+ </hal_details>
+ </entry>
+ </dynamic>
+ </section>
+ <section name="request">
+ <controls>
+ <entry name="frameCount" type="int32" visibility="system" deprecated="true">
+ <description>A frame counter set by the framework. Must
+ be maintained unchanged in output frame. This value monotonically
+ increases with every new result (that is, each new result has a unique
+ frameCount value).
+ </description>
+ <units>incrementing integer</units>
+ <range>Any int.</range>
+ </entry>
+ <entry name="id" type="int32" visibility="hidden">
+ <description>An application-specified ID for the current
+ request. Must be maintained unchanged in output
+ frame</description>
+ <units>arbitrary integer assigned by application</units>
+ <range>Any int</range>
+ <tag id="V1" />
+ </entry>
+ <entry name="inputStreams" type="int32" visibility="system" deprecated="true"
+ container="array">
+ <array>
+ <size>n</size>
+ </array>
+ <description>List which camera reprocess stream is used
+ for the source of reprocessing data.</description>
+ <units>List of camera reprocess stream IDs</units>
+ <range>
+ Typically, only one entry allowed, must be a valid reprocess stream ID.
+ </range>
+ <details>Only meaningful when android.request.type ==
+ REPROCESS. Ignored otherwise</details>
+ <tag id="HAL2" />
+ </entry>
+ <entry name="metadataMode" type="byte" visibility="system"
+ enum="true">
+ <enum>
+ <value>NONE
+ <notes>No metadata should be produced on output, except
+ for application-bound buffer data. If no
+ application-bound streams exist, no frame should be
+ placed in the output frame queue. If such streams
+ exist, a frame should be placed on the output queue
+ with null metadata but with the necessary output buffer
+ information. Timestamp information should still be
+ included with any output stream buffers</notes></value>
+ <value>FULL
+ <notes>All metadata should be produced. Statistics will
+ only be produced if they are separately
+ enabled</notes></value>
+ </enum>
+ <description>How much metadata to produce on
+ output</description>
+ <tag id="FUTURE" />
+ </entry>
+ <entry name="outputStreams" type="int32" visibility="system" deprecated="true"
+ container="array">
+ <array>
+ <size>n</size>
+ </array>
+ <description>Lists which camera output streams image data
+ from this capture must be sent to</description>
+ <units>List of camera stream IDs</units>
+ <range>List must only include streams that have been
+ created</range>
+ <details>If no output streams are listed, then the image
+ data should simply be discarded. The image data must
+ still be captured for metadata and statistics production,
+ and the lens and flash must operate as requested.</details>
+ <tag id="HAL2" />
+ </entry>
+ <entry name="type" type="byte" visibility="system" deprecated="true" enum="true">
+ <enum>
+ <value>CAPTURE
+ <notes>Capture a new image from the imaging hardware,
+ and process it according to the
+ settings</notes></value>
+ <value>REPROCESS
+ <notes>Process previously captured data; the
+ android.request.inputStreams parameter determines the
+ source reprocessing stream. TODO: Mark dynamic metadata
+ needed for reprocessing with [RP]</notes></value>
+ </enum>
+ <description>The type of the request; either CAPTURE or
+ REPROCESS. For HAL3, this tag is redundant.
+ </description>
+ <tag id="HAL2" />
+ </entry>
+ </controls>
+ <static>
+ <entry name="maxNumOutputStreams" type="int32" visibility="ndk_public"
+ container="array" hwlevel="legacy">
+ <array>
+ <size>3</size>
+ </array>
+ <description>The maximum numbers of different types of output streams
+ that can be configured and used simultaneously by a camera device.
+ </description>
+ <range>
+ For processed (and stalling) format streams, &gt;= 1.
+
+ For Raw format (either stalling or non-stalling) streams, &gt;= 0.
+
+ For processed (but not stalling) format streams, &gt;= 3
+ for FULL mode devices (`android.info.supportedHardwareLevel == FULL`);
+ &gt;= 2 for LIMITED mode devices (`android.info.supportedHardwareLevel == LIMITED`).
+ </range>
+ <details>
+ This is a 3 element tuple that contains the max number of output simultaneous
+ streams for raw sensor, processed (but not stalling), and processed (and stalling)
+ formats respectively. For example, assuming that JPEG is typically a processed and
+ stalling stream, if max raw sensor format output stream number is 1, max YUV streams
+ number is 3, and max JPEG stream number is 2, then this tuple should be `(1, 3, 2)`.
+
+ This lists the upper bound of the number of output streams supported by
+ the camera device. Using more streams simultaneously may require more hardware and
+ CPU resources that will consume more power. The image format for an output stream can
+ be any supported format provided by android.scaler.availableStreamConfigurations.
+ The formats defined in android.scaler.availableStreamConfigurations can be catergorized
+ into the 3 stream types as below:
+
+ * Processed (but stalling): any non-RAW format with a stallDurations &gt; 0.
+ Typically {@link AIMAGE_FORMAT_JPEG} format.
+ * Raw formats: {@link AIMAGE_FORMAT_RAW16}, {@link AIMAGE_FORMAT_RAW10}, or
+ {@link AIMAGE_FORMAT_RAW12}.
+ * Processed (but not-stalling): any non-RAW format without a stall duration.
+ Typically {@link AIMAGE_FORMAT_YUV_420_888}.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="maxNumOutputRaw" type="int32" visibility="java_public" synthetic="true"
+ hwlevel="legacy">
+ <description>The maximum numbers of different types of output streams
+ that can be configured and used simultaneously by a camera device
+ for any `RAW` formats.
+ </description>
+ <range>
+ &gt;= 0
+ </range>
+ <details>
+ This value contains the max number of output simultaneous
+ streams from the raw sensor.
+
+ This lists the upper bound of the number of output streams supported by
+ the camera device. Using more streams simultaneously may require more hardware and
+ CPU resources that will consume more power. The image format for this kind of an output stream can
+ be any `RAW` and supported format provided by android.scaler.streamConfigurationMap.
+
+ In particular, a `RAW` format is typically one of:
+
+ * {@link AIMAGE_FORMAT_RAW16}
+ * {@link AIMAGE_FORMAT_RAW10}
+ * {@link AIMAGE_FORMAT_RAW12}
+
+ LEGACY mode devices (android.info.supportedHardwareLevel `==` LEGACY)
+ never support raw streams.
+ </details>
+ </entry>
+ <entry name="maxNumOutputProc" type="int32" visibility="java_public" synthetic="true"
+ hwlevel="legacy">
+ <description>The maximum numbers of different types of output streams
+ that can be configured and used simultaneously by a camera device
+ for any processed (but not-stalling) formats.
+ </description>
+ <range>
+ &gt;= 3
+ for FULL mode devices (`android.info.supportedHardwareLevel == FULL`);
+ &gt;= 2 for LIMITED mode devices (`android.info.supportedHardwareLevel == LIMITED`).
+ </range>
+ <details>
+ This value contains the max number of output simultaneous
+ streams for any processed (but not-stalling) formats.
+
+ This lists the upper bound of the number of output streams supported by
+ the camera device. Using more streams simultaneously may require more hardware and
+ CPU resources that will consume more power. The image format for this kind of an output stream can
+ be any non-`RAW` and supported format provided by android.scaler.streamConfigurationMap.
+
+ Processed (but not-stalling) is defined as any non-RAW format without a stall duration.
+ Typically:
+
+ * {@link AIMAGE_FORMAT_YUV_420_888}
+ * Implementation-defined formats, i.e. {@link
+ android.hardware.camera2.params.StreamConfigurationMap#isOutputSupportedFor(Class)}
+
+ For full guarantees, query {@link
+ android.hardware.camera2.params.StreamConfigurationMap#getOutputStallDuration} with a
+ processed format -- it will return 0 for a non-stalling stream.
+
+ LEGACY devices will support at least 2 processing/non-stalling streams.
+ </details>
+ </entry>
+ <entry name="maxNumOutputProcStalling" type="int32" visibility="java_public" synthetic="true"
+ hwlevel="legacy">
+ <description>The maximum numbers of different types of output streams
+ that can be configured and used simultaneously by a camera device
+ for any processed (and stalling) formats.
+ </description>
+ <range>
+ &gt;= 1
+ </range>
+ <details>
+ This value contains the max number of output simultaneous
+ streams for any processed (but not-stalling) formats.
+
+ This lists the upper bound of the number of output streams supported by
+ the camera device. Using more streams simultaneously may require more hardware and
+ CPU resources that will consume more power. The image format for this kind of an output stream can
+ be any non-`RAW` and supported format provided by android.scaler.streamConfigurationMap.
+
+ A processed and stalling format is defined as any non-RAW format with a stallDurations
+ &gt; 0. Typically only the {@link AIMAGE_FORMAT_JPEG} format is a
+ stalling format.
+
+ For full guarantees, query {@link
+ android.hardware.camera2.params.StreamConfigurationMap#getOutputStallDuration} with a
+ processed format -- it will return a non-0 value for a stalling stream.
+
+ LEGACY devices will support up to 1 processing/stalling stream.
+ </details>
+ </entry>
+ <entry name="maxNumReprocessStreams" type="int32" visibility="system"
+ deprecated="true" container="array">
+ <array>
+ <size>1</size>
+ </array>
+ <description>How many reprocessing streams of any type
+ can be allocated at the same time.</description>
+ <range>&gt;= 0</range>
+ <details>
+ Only used by HAL2.x.
+
+ When set to 0, it means no reprocess stream is supported.
+ </details>
+ <tag id="HAL2" />
+ </entry>
+ <entry name="maxNumInputStreams" type="int32" visibility="java_public" hwlevel="full">
+ <description>
+ The maximum numbers of any type of input streams
+ that can be configured and used simultaneously by a camera device.
+ </description>
+ <range>
+ 0 or 1.
+ </range>
+ <details>When set to 0, it means no input stream is supported.
+
+ The image format for a input stream can be any supported format returned by {@link
+ android.hardware.camera2.params.StreamConfigurationMap#getInputFormats}. When using an
+ input stream, there must be at least one output stream configured to to receive the
+ reprocessed images.
+
+ When an input stream and some output streams are used in a reprocessing request,
+ only the input buffer will be used to produce these output stream buffers, and a
+ new sensor image will not be captured.
+
+ For example, for Zero Shutter Lag (ZSL) still capture use case, the input
+ stream image format will be PRIVATE, the associated output stream image format
+ should be JPEG.
+ </details>
+ <hal_details>
+ For the reprocessing flow and controls, see
+ hardware/libhardware/include/hardware/camera3.h Section 10 for more details.
+ </hal_details>
+ <tag id="REPROC" />
+ </entry>
+ </static>
+ <dynamic>
+ <entry name="frameCount" type="int32" visibility="hidden" deprecated="true">
+ <description>A frame counter set by the framework. This value monotonically
+ increases with every new result (that is, each new result has a unique
+ frameCount value).</description>
+ <units>count of frames</units>
+ <range>&gt; 0</range>
+ <details>Reset on release()</details>
+ </entry>
+ <clone entry="android.request.id" kind="controls"></clone>
+ <clone entry="android.request.metadataMode"
+ kind="controls"></clone>
+ <clone entry="android.request.outputStreams"
+ kind="controls"></clone>
+ <entry name="pipelineDepth" type="byte" visibility="public" hwlevel="legacy">
+ <description>Specifies the number of pipeline stages the frame went
+ through from when it was exposed to when the final completed result
+ was available to the framework.</description>
+ <range>&lt;= android.request.pipelineMaxDepth</range>
+ <details>Depending on what settings are used in the request, and
+ what streams are configured, the data may undergo less processing,
+ and some pipeline stages skipped.
+
+ See android.request.pipelineMaxDepth for more details.
+ </details>
+ <hal_details>
+ This value must always represent the accurate count of how many
+ pipeline stages were actually used.
+ </hal_details>
+ </entry>
+ </dynamic>
+ <static>
+ <entry name="pipelineMaxDepth" type="byte" visibility="public" hwlevel="legacy">
+ <description>Specifies the number of maximum pipeline stages a frame
+ has to go through from when it's exposed to when it's available
+ to the framework.</description>
+ <details>A typical minimum value for this is 2 (one stage to expose,
+ one stage to readout) from the sensor. The ISP then usually adds
+ its own stages to do custom HW processing. Further stages may be
+ added by SW processing.
+
+ Depending on what settings are used (e.g. YUV, JPEG) and what
+ processing is enabled (e.g. face detection), the actual pipeline
+ depth (specified by android.request.pipelineDepth) may be less than
+ the max pipeline depth.
+
+ A pipeline depth of X stages is equivalent to a pipeline latency of
+ X frame intervals.
+
+ This value will normally be 8 or less, however, for high speed capture session,
+ the max pipeline depth will be up to 8 x size of high speed capture request list.
+ </details>
+ <hal_details>
+ This value should be 4 or less, expect for the high speed recording session, where the
+ max batch sizes may be larger than 1.
+ </hal_details>
+ </entry>
+ <entry name="partialResultCount" type="int32" visibility="public" optional="true">
+ <description>Defines how many sub-components
+ a result will be composed of.
+ </description>
+ <range>&gt;= 1</range>
+ <details>In order to combat the pipeline latency, partial results
+ may be delivered to the application layer from the camera device as
+ soon as they are available.
+
+ Optional; defaults to 1. A value of 1 means that partial
+ results are not supported, and only the final TotalCaptureResult will
+ be produced by the camera device.
+
+ A typical use case for this might be: after requesting an
+ auto-focus (AF) lock the new AF state might be available 50%
+ of the way through the pipeline. The camera device could
+ then immediately dispatch this state via a partial result to
+ the application, and the rest of the metadata via later
+ partial results.
+ </details>
+ </entry>
+ <entry name="availableCapabilities" type="byte" visibility="public"
+ enum="true" container="array" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <enum>
+ <value>BACKWARD_COMPATIBLE
+ <notes>The minimal set of capabilities that every camera
+ device (regardless of android.info.supportedHardwareLevel)
+ supports.
+
+ This capability is listed by all normal devices, and
+ indicates that the camera device has a feature set
+ that's comparable to the baseline requirements for the
+ older android.hardware.Camera API.
+
+ Devices with the DEPTH_OUTPUT capability might not list this
+ capability, indicating that they support only depth measurement,
+ not standard color output.
+ </notes>
+ </value>
+ <value optional="true">MANUAL_SENSOR
+ <notes>
+ The camera device can be manually controlled (3A algorithms such
+ as auto-exposure, and auto-focus can be bypassed).
+ The camera device supports basic manual control of the sensor image
+ acquisition related stages. This means the following controls are
+ guaranteed to be supported:
+
+ * Manual frame duration control
+ * android.sensor.frameDuration
+ * android.sensor.info.maxFrameDuration
+ * Manual exposure control
+ * android.sensor.exposureTime
+ * android.sensor.info.exposureTimeRange
+ * Manual sensitivity control
+ * android.sensor.sensitivity
+ * android.sensor.info.sensitivityRange
+ * Manual lens control (if the lens is adjustable)
+ * android.lens.*
+ * Manual flash control (if a flash unit is present)
+ * android.flash.*
+ * Manual black level locking
+ * android.blackLevel.lock
+ * Auto exposure lock
+ * android.control.aeLock
+
+ If any of the above 3A algorithms are enabled, then the camera
+ device will accurately report the values applied by 3A in the
+ result.
+
+ A given camera device may also support additional manual sensor controls,
+ but this capability only covers the above list of controls.
+
+ If this is supported, android.scaler.streamConfigurationMap will
+ additionally return a min frame duration that is greater than
+ zero for each supported size-format combination.
+ </notes>
+ </value>
+ <value optional="true">MANUAL_POST_PROCESSING
+ <notes>
+ The camera device post-processing stages can be manually controlled.
+ The camera device supports basic manual control of the image post-processing
+ stages. This means the following controls are guaranteed to be supported:
+
+ * Manual tonemap control
+ * android.tonemap.curve
+ * android.tonemap.mode
+ * android.tonemap.maxCurvePoints
+ * android.tonemap.gamma
+ * android.tonemap.presetCurve
+
+ * Manual white balance control
+ * android.colorCorrection.transform
+ * android.colorCorrection.gains
+ * Manual lens shading map control
+ * android.shading.mode
+ * android.statistics.lensShadingMapMode
+ * android.statistics.lensShadingMap
+ * android.lens.info.shadingMapSize
+ * Manual aberration correction control (if aberration correction is supported)
+ * android.colorCorrection.aberrationMode
+ * android.colorCorrection.availableAberrationModes
+ * Auto white balance lock
+ * android.control.awbLock
+
+ If auto white balance is enabled, then the camera device
+ will accurately report the values applied by AWB in the result.
+
+ A given camera device may also support additional post-processing
+ controls, but this capability only covers the above list of controls.
+ </notes>
+ </value>
+ <value optional="true">RAW
+ <notes>
+ The camera device supports outputting RAW buffers and
+ metadata for interpreting them.
+
+ Devices supporting the RAW capability allow both for
+ saving DNG files, and for direct application processing of
+ raw sensor images.
+
+ * RAW_SENSOR is supported as an output format.
+ * The maximum available resolution for RAW_SENSOR streams
+ will match either the value in
+ android.sensor.info.pixelArraySize or
+ android.sensor.info.preCorrectionActiveArraySize.
+ * All DNG-related optional metadata entries are provided
+ by the camera device.
+ </notes>
+ </value>
+ <value optional="true" ndk_hidden="true">PRIVATE_REPROCESSING
+ <notes>
+ The camera device supports the Zero Shutter Lag reprocessing use case.
+
+ * One input stream is supported, that is, `android.request.maxNumInputStreams == 1`.
+ * {@link android.graphics.ImageFormat#PRIVATE} is supported as an output/input format,
+ that is, {@link android.graphics.ImageFormat#PRIVATE} is included in the lists of
+ formats returned by {@link
+ android.hardware.camera2.params.StreamConfigurationMap#getInputFormats} and {@link
+ android.hardware.camera2.params.StreamConfigurationMap#getOutputFormats}.
+ * {@link android.hardware.camera2.params.StreamConfigurationMap#getValidOutputFormatsForInput}
+ returns non empty int[] for each supported input format returned by {@link
+ android.hardware.camera2.params.StreamConfigurationMap#getInputFormats}.
+ * Each size returned by {@link
+ android.hardware.camera2.params.StreamConfigurationMap#getInputSizes
+ getInputSizes(ImageFormat.PRIVATE)} is also included in {@link
+ android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes
+ getOutputSizes(ImageFormat.PRIVATE)}
+ * Using {@link android.graphics.ImageFormat#PRIVATE} does not cause a frame rate drop
+ relative to the sensor's maximum capture rate (at that resolution).
+ * {@link android.graphics.ImageFormat#PRIVATE} will be reprocessable into both
+ {@link android.graphics.ImageFormat#YUV_420_888} and
+ {@link android.graphics.ImageFormat#JPEG} formats.
+ * The maximum available resolution for PRIVATE streams
+ (both input/output) will match the maximum available
+ resolution of JPEG streams.
+ * Static metadata android.reprocess.maxCaptureStall.
+ * Only below controls are effective for reprocessing requests and
+ will be present in capture results, other controls in reprocess
+ requests will be ignored by the camera device.
+ * android.jpeg.*
+ * android.noiseReduction.mode
+ * android.edge.mode
+ * android.noiseReduction.availableNoiseReductionModes and
+ android.edge.availableEdgeModes will both list ZERO_SHUTTER_LAG as a supported mode.
+ </notes>
+ </value>
+ <value optional="true">READ_SENSOR_SETTINGS
+ <notes>
+ The camera device supports accurately reporting the sensor settings for many of
+ the sensor controls while the built-in 3A algorithm is running. This allows
+ reporting of sensor settings even when these settings cannot be manually changed.
+
+ The values reported for the following controls are guaranteed to be available
+ in the CaptureResult, including when 3A is enabled:
+
+ * Exposure control
+ * android.sensor.exposureTime
+ * Sensitivity control
+ * android.sensor.sensitivity
+ * Lens controls (if the lens is adjustable)
+ * android.lens.focusDistance
+ * android.lens.aperture
+
+ This capability is a subset of the MANUAL_SENSOR control capability, and will
+ always be included if the MANUAL_SENSOR capability is available.
+ </notes>
+ </value>
+ <value optional="true">BURST_CAPTURE
+ <notes>
+ The camera device supports capturing high-resolution images at >= 20 frames per
+ second, in at least the uncompressed YUV format, when post-processing settings are set
+ to FAST. Additionally, maximum-resolution images can be captured at >= 10 frames
+ per second. Here, 'high resolution' means at least 8 megapixels, or the maximum
+ resolution of the device, whichever is smaller.
+
+ More specifically, this means that at least one output {@link
+ AIMAGE_FORMAT_YUV_420_888} size listed in
+ {@link ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS} is larger or equal to the
+ 'high resolution' defined above, and can be captured at at least 20 fps.
+ For the largest {@link AIMAGE_FORMAT_YUV_420_888} size listed in
+ {@link ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS}, camera device can capture this
+ size for at least 10 frames per second.
+ Also the android.control.aeAvailableTargetFpsRanges entry lists at least one FPS range
+ where the minimum FPS is >= 1 / minimumFrameDuration for the largest YUV_420_888 size.
+
+ If the device supports the {@link AIMAGE_FORMAT_RAW10}, {@link
+ AIMAGE_FORMAT_RAW12}, then those can also be captured at the same rate
+ as the maximum-size YUV_420_888 resolution is.
+
+ In addition, the android.sync.maxLatency field is guaranted to have a value between 0
+ and 4, inclusive. android.control.aeLockAvailable and android.control.awbLockAvailable
+ are also guaranteed to be `true` so burst capture with these two locks ON yields
+ consistent image output.
+ </notes>
+ </value>
+ <value optional="true" ndk_hidden="true">YUV_REPROCESSING
+ <notes>
+ The camera device supports the YUV_420_888 reprocessing use case, similar as
+ PRIVATE_REPROCESSING, This capability requires the camera device to support the
+ following:
+
+ * One input stream is supported, that is, `android.request.maxNumInputStreams == 1`.
+ * {@link android.graphics.ImageFormat#YUV_420_888} is supported as an output/input format, that is,
+ YUV_420_888 is included in the lists of formats returned by
+ {@link android.hardware.camera2.params.StreamConfigurationMap#getInputFormats} and
+ {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputFormats}.
+ * {@link
+ android.hardware.camera2.params.StreamConfigurationMap#getValidOutputFormatsForInput}
+ returns non-empty int[] for each supported input format returned by {@link
+ android.hardware.camera2.params.StreamConfigurationMap#getInputFormats}.
+ * Each size returned by {@link
+ android.hardware.camera2.params.StreamConfigurationMap#getInputSizes
+ getInputSizes(YUV_420_888)} is also included in {@link
+ android.hardware.camera2.params.StreamConfigurationMap#getOutputSizes
+ getOutputSizes(YUV_420_888)}
+ * Using {@link android.graphics.ImageFormat#YUV_420_888} does not cause a frame rate drop
+ relative to the sensor's maximum capture rate (at that resolution).
+ * {@link android.graphics.ImageFormat#YUV_420_888} will be reprocessable into both
+ {@link android.graphics.ImageFormat#YUV_420_888} and {@link
+ android.graphics.ImageFormat#JPEG} formats.
+ * The maximum available resolution for {@link
+ android.graphics.ImageFormat#YUV_420_888} streams (both input/output) will match the
+ maximum available resolution of {@link android.graphics.ImageFormat#JPEG} streams.
+ * Static metadata android.reprocess.maxCaptureStall.
+ * Only the below controls are effective for reprocessing requests and will be present
+ in capture results. The reprocess requests are from the original capture results that
+ are associated with the intermediate {@link android.graphics.ImageFormat#YUV_420_888}
+ output buffers. All other controls in the reprocess requests will be ignored by the
+ camera device.
+ * android.jpeg.*
+ * android.noiseReduction.mode
+ * android.edge.mode
+ * android.reprocess.effectiveExposureFactor
+ * android.noiseReduction.availableNoiseReductionModes and
+ android.edge.availableEdgeModes will both list ZERO_SHUTTER_LAG as a supported mode.
+ </notes>
+ </value>
+ <value optional="true">DEPTH_OUTPUT
+ <notes>
+ The camera device can produce depth measurements from its field of view.
+
+ This capability requires the camera device to support the following:
+
+ * {@link AIMAGE_FORMAT_DEPTH16} is supported as an output format.
+ * {@link AIMAGE_FORMAT_DEPTH_POINT_CLOUD} is optionally supported as an
+ output format.
+ * This camera device, and all camera devices with the same android.lens.facing,
+ will list the following calibration entries in {@link ACameraMetadata} from both
+ {@link ACameraManager_getCameraCharacteristics} and
+ {@link ACameraCaptureSession_captureCallback_result}:
+ - android.lens.poseTranslation
+ - android.lens.poseRotation
+ - android.lens.intrinsicCalibration
+ - android.lens.radialDistortion
+ * The android.depth.depthIsExclusive entry is listed by this device.
+ * A LIMITED camera with only the DEPTH_OUTPUT capability does not have to support
+ normal YUV_420_888, JPEG, and PRIV-format outputs. It only has to support the DEPTH16
+ format.
+
+ Generally, depth output operates at a slower frame rate than standard color capture,
+ so the DEPTH16 and DEPTH_POINT_CLOUD formats will commonly have a stall duration that
+ should be accounted for (see
+ {@link ACAMERA_DEPTH_AVAILABLE_DEPTH_STALL_DURATIONS}).
+ On a device that supports both depth and color-based output, to enable smooth preview,
+ using a repeating burst is recommended, where a depth-output target is only included
+ once every N frames, where N is the ratio between preview output rate and depth output
+ rate, including depth stall time.
+ </notes>
+ </value>
+ <value optional="true" ndk_hidden="true">CONSTRAINED_HIGH_SPEED_VIDEO
+ <notes>
+ The device supports constrained high speed video recording (frame rate >=120fps)
+ use case. The camera device will support high speed capture session created by
+ {@link android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession}, which
+ only accepts high speed request lists created by
+ {@link android.hardware.camera2.CameraConstrainedHighSpeedCaptureSession#createHighSpeedRequestList}.
+
+ A camera device can still support high speed video streaming by advertising the high speed
+ FPS ranges in android.control.aeAvailableTargetFpsRanges. For this case, all normal
+ capture request per frame control and synchronization requirements will apply to
+ the high speed fps ranges, the same as all other fps ranges. This capability describes
+ the capability of a specialized operating mode with many limitations (see below), which
+ is only targeted at high speed video recording.
+
+ The supported high speed video sizes and fps ranges are specified in
+ {@link android.hardware.camera2.params.StreamConfigurationMap#getHighSpeedVideoFpsRanges}.
+ To get desired output frame rates, the application is only allowed to select video size
+ and FPS range combinations provided by
+ {@link android.hardware.camera2.params.StreamConfigurationMap#getHighSpeedVideoSizes}.
+ The fps range can be controlled via android.control.aeTargetFpsRange.
+
+ In this capability, the camera device will override aeMode, awbMode, and afMode to
+ ON, AUTO, and CONTINUOUS_VIDEO, respectively. All post-processing block mode
+ controls will be overridden to be FAST. Therefore, no manual control of capture
+ and post-processing parameters is possible. All other controls operate the
+ same as when android.control.mode == AUTO. This means that all other
+ android.control.* fields continue to work, such as
+
+ * android.control.aeTargetFpsRange
+ * android.control.aeExposureCompensation
+ * android.control.aeLock
+ * android.control.awbLock
+ * android.control.effectMode
+ * android.control.aeRegions
+ * android.control.afRegions
+ * android.control.awbRegions
+ * android.control.afTrigger
+ * android.control.aePrecaptureTrigger
+
+ Outside of android.control.*, the following controls will work:
+
+ * android.flash.mode (TORCH mode only, automatic flash for still capture will not
+ work since aeMode is ON)
+ * android.lens.opticalStabilizationMode (if it is supported)
+ * android.scaler.cropRegion
+ * android.statistics.faceDetectMode (if it is supported)
+
+ For high speed recording use case, the actual maximum supported frame rate may
+ be lower than what camera can output, depending on the destination Surfaces for
+ the image data. For example, if the destination surface is from video encoder,
+ the application need check if the video encoder is capable of supporting the
+ high frame rate for a given video size, or it will end up with lower recording
+ frame rate. If the destination surface is from preview window, the actual preview frame
+ rate will be bounded by the screen refresh rate.
+
+ The camera device will only support up to 2 high speed simultaneous output surfaces
+ (preview and recording surfaces)
+ in this mode. Above controls will be effective only if all of below conditions are true:
+
+ * The application creates a camera capture session with no more than 2 surfaces via
+ {@link android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession}. The
+ targeted surfaces must be preview surface (either from
+ {@link android.view.SurfaceView} or {@link android.graphics.SurfaceTexture}) or
+ recording surface(either from {@link android.media.MediaRecorder#getSurface} or
+ {@link android.media.MediaCodec#createInputSurface}).
+ * The stream sizes are selected from the sizes reported by
+ {@link android.hardware.camera2.params.StreamConfigurationMap#getHighSpeedVideoSizes}.
+ * The FPS ranges are selected from
+ {@link android.hardware.camera2.params.StreamConfigurationMap#getHighSpeedVideoFpsRanges}.
+
+ When above conditions are NOT satistied,
+ {@link android.hardware.camera2.CameraDevice#createConstrainedHighSpeedCaptureSession}
+ will fail.
+
+ Switching to a FPS range that has different maximum FPS may trigger some camera device
+ reconfigurations, which may introduce extra latency. It is recommended that
+ the application avoids unnecessary maximum target FPS changes as much as possible
+ during high speed streaming.
+ </notes>
+ </value>
+ </enum>
+ <description>List of capabilities that this camera device
+ advertises as fully supporting.</description>
+ <details>
+ A capability is a contract that the camera device makes in order
+ to be able to satisfy one or more use cases.
+
+ Listing a capability guarantees that the whole set of features
+ required to support a common use will all be available.
+
+ Using a subset of the functionality provided by an unsupported
+ capability may be possible on a specific camera device implementation;
+ to do this query each of android.request.availableRequestKeys,
+ android.request.availableResultKeys,
+ android.request.availableCharacteristicsKeys.
+
+ The following capabilities are guaranteed to be available on
+ android.info.supportedHardwareLevel `==` FULL devices:
+
+ * MANUAL_SENSOR
+ * MANUAL_POST_PROCESSING
+
+ Other capabilities may be available on either FULL or LIMITED
+ devices, but the application should query this key to be sure.
+ </details>
+ <hal_details>
+ Additional constraint details per-capability will be available
+ in the Compatibility Test Suite.
+
+ Minimum baseline requirements required for the
+ BACKWARD_COMPATIBLE capability are not explicitly listed.
+ Instead refer to "BC" tags and the camera CTS tests in the
+ android.hardware.camera2.cts package.
+
+ Listed controls that can be either request or result (e.g.
+ android.sensor.exposureTime) must be available both in the
+ request and the result in order to be considered to be
+ capability-compliant.
+
+ For example, if the HAL claims to support MANUAL control,
+ then exposure time must be configurable via the request _and_
+ the actual exposure applied must be available via
+ the result.
+
+ If MANUAL_SENSOR is omitted, the HAL may choose to omit the
+ android.scaler.availableMinFrameDurations static property entirely.
+
+ For PRIVATE_REPROCESSING and YUV_REPROCESSING capabilities, see
+ hardware/libhardware/include/hardware/camera3.h Section 10 for more information.
+
+ Devices that support the MANUAL_SENSOR capability must support the
+ CAMERA3_TEMPLATE_MANUAL template defined in camera3.h.
+
+ Devices that support the PRIVATE_REPROCESSING capability or the
+ YUV_REPROCESSING capability must support the
+ CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG template defined in camera3.h.
+
+ For DEPTH_OUTPUT, the depth-format keys
+ android.depth.availableDepthStreamConfigurations,
+ android.depth.availableDepthMinFrameDurations,
+ android.depth.availableDepthStallDurations must be available, in
+ addition to the other keys explicitly mentioned in the DEPTH_OUTPUT
+ enum notes. The entry android.depth.maxDepthSamples must be available
+ if the DEPTH_POINT_CLOUD format is supported (HAL pixel format BLOB, dataspace
+ DEPTH).
+ </hal_details>
+ </entry>
+ <entry name="availableRequestKeys" type="int32" visibility="ndk_public"
+ container="array" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>A list of all keys that the camera device has available
+ to use with {@link ACaptureRequest}.</description>
+
+ <details>Attempting to set a key into a CaptureRequest that is not
+ listed here will result in an invalid request and will be rejected
+ by the camera device.
+
+ This field can be used to query the feature set of a camera device
+ at a more granular level than capabilities. This is especially
+ important for optional keys that are not listed under any capability
+ in android.request.availableCapabilities.
+ </details>
+ <hal_details>
+ Vendor tags must not be listed here. Use the vendor tag metadata
+ extensions C api instead (refer to camera3.h for more details).
+
+ Setting/getting vendor tags will be checked against the metadata
+ vendor extensions API and not against this field.
+
+ The HAL must not consume any request tags that are not listed either
+ here or in the vendor tag list.
+
+ The public camera2 API will always make the vendor tags visible
+ via
+ {@link android.hardware.camera2.CameraCharacteristics#getAvailableCaptureRequestKeys}.
+ </hal_details>
+ </entry>
+ <entry name="availableResultKeys" type="int32" visibility="ndk_public"
+ container="array" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>A list of all keys that the camera device has available
+ to query with {@link ACameraMetadata} from
+ {@link ACameraCaptureSession_captureCallback_result}.</description>
+
+ <details>Attempting to get a key from a CaptureResult that is not
+ listed here will always return a `null` value. Getting a key from
+ a CaptureResult that is listed here will generally never return a `null`
+ value.
+
+ The following keys may return `null` unless they are enabled:
+
+ * android.statistics.lensShadingMap (non-null iff android.statistics.lensShadingMapMode == ON)
+
+ (Those sometimes-null keys will nevertheless be listed here
+ if they are available.)
+
+ This field can be used to query the feature set of a camera device
+ at a more granular level than capabilities. This is especially
+ important for optional keys that are not listed under any capability
+ in android.request.availableCapabilities.
+ </details>
+ <hal_details>
+ Tags listed here must always have an entry in the result metadata,
+ even if that size is 0 elements. Only array-type tags (e.g. lists,
+ matrices, strings) are allowed to have 0 elements.
+
+ Vendor tags must not be listed here. Use the vendor tag metadata
+ extensions C api instead (refer to camera3.h for more details).
+
+ Setting/getting vendor tags will be checked against the metadata
+ vendor extensions API and not against this field.
+
+ The HAL must not produce any result tags that are not listed either
+ here or in the vendor tag list.
+
+ The public camera2 API will always make the vendor tags visible via {@link
+ android.hardware.camera2.CameraCharacteristics#getAvailableCaptureResultKeys}.
+ </hal_details>
+ </entry>
+ <entry name="availableCharacteristicsKeys" type="int32" visibility="ndk_public"
+ container="array" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>A list of all keys that the camera device has available
+ to query with {@link ACameraMetadata} from
+ {@link ACameraManager_getCameraCharacteristics}.</description>
+ <details>This entry follows the same rules as
+ android.request.availableResultKeys (except that it applies for
+ CameraCharacteristics instead of CaptureResult). See above for more
+ details.
+ </details>
+ <hal_details>
+ Keys listed here must always have an entry in the static info metadata,
+ even if that size is 0 elements. Only array-type tags (e.g. lists,
+ matrices, strings) are allowed to have 0 elements.
+
+ Vendor tags must not be listed here. Use the vendor tag metadata
+ extensions C api instead (refer to camera3.h for more details).
+
+ Setting/getting vendor tags will be checked against the metadata
+ vendor extensions API and not against this field.
+
+ The HAL must not have any tags in its static info that are not listed
+ either here or in the vendor tag list.
+
+ The public camera2 API will always make the vendor tags visible
+ via {@link android.hardware.camera2.CameraCharacteristics#getKeys}.
+ </hal_details>
+ </entry>
+ </static>
+ </section>
+ <section name="scaler">
+ <controls>
+ <entry name="cropRegion" type="int32" visibility="public"
+ container="array" typedef="rectangle" hwlevel="legacy">
+ <array>
+ <size>4</size>
+ </array>
+ <description>The desired region of the sensor to read out for this capture.</description>
+ <units>Pixel coordinates relative to
+ android.sensor.info.activeArraySize</units>
+ <details>
+ This control can be used to implement digital zoom.
+
+ The data representation is int[4], which maps to (left, top, width, height).
+
+ The crop region coordinate system is based off
+ android.sensor.info.activeArraySize, with `(0, 0)` being the
+ top-left corner of the sensor active array.
+
+ Output streams use this rectangle to produce their output,
+ cropping to a smaller region if necessary to maintain the
+ stream's aspect ratio, then scaling the sensor input to
+ match the output's configured resolution.
+
+ The crop region is applied after the RAW to other color
+ space (e.g. YUV) conversion. Since raw streams
+ (e.g. RAW16) don't have the conversion stage, they are not
+ croppable. The crop region will be ignored by raw streams.
+
+ For non-raw streams, any additional per-stream cropping will
+ be done to maximize the final pixel area of the stream.
+
+ For example, if the crop region is set to a 4:3 aspect
+ ratio, then 4:3 streams will use the exact crop
+ region. 16:9 streams will further crop vertically
+ (letterbox).
+
+ Conversely, if the crop region is set to a 16:9, then 4:3
+ outputs will crop horizontally (pillarbox), and 16:9
+ streams will match exactly. These additional crops will
+ be centered within the crop region.
+
+ The width and height of the crop region cannot
+ be set to be smaller than
+ `floor( activeArraySize.width / android.scaler.availableMaxDigitalZoom )` and
+ `floor( activeArraySize.height / android.scaler.availableMaxDigitalZoom )`, respectively.
+
+ The camera device may adjust the crop region to account
+ for rounding and other hardware requirements; the final
+ crop region used will be included in the output capture
+ result.
+ </details>
+ <hal_details>
+ The output streams must maintain square pixels at all
+ times, no matter what the relative aspect ratios of the
+ crop region and the stream are. Negative values for
+ corner are allowed for raw output if full pixel array is
+ larger than active pixel array. Width and height may be
+ rounded to nearest larger supportable width, especially
+ for raw output, where only a few fixed scales may be
+ possible.
+
+ For a set of output streams configured, if the sensor output is cropped to a smaller
+ size than active array size, the HAL need follow below cropping rules:
+
+ * The HAL need handle the cropRegion as if the sensor crop size is the effective active
+ array size.More specifically, the HAL must transform the request cropRegion from
+ android.sensor.info.activeArraySize to the sensor cropped pixel area size in this way:
+ 1. Translate the requested cropRegion w.r.t., the left top corner of the sensor
+ cropped pixel area by (tx, ty),
+ where `tx = sensorCrop.top * (sensorCrop.height / activeArraySize.height)`
+ and `tx = sensorCrop.left * (sensorCrop.width / activeArraySize.width)`. The
+ (sensorCrop.top, sensorCrop.left) is the coordinate based off the
+ android.sensor.info.activeArraySize.
+ 2. Scale the width and height of requested cropRegion with scaling factor of
+ sensorCrop.width/activeArraySize.width and sensorCrop.height/activeArraySize.height
+ respectively.
+ Once this new cropRegion is calculated, the HAL must use this region to crop the image
+ with regard to the sensor crop size (effective active array size). The HAL still need
+ follow the general cropping rule for this new cropRegion and effective active
+ array size.
+
+ * The HAL must report the cropRegion with regard to android.sensor.info.activeArraySize.
+ The HAL need convert the new cropRegion generated above w.r.t., full active array size.
+ The reported cropRegion may be slightly different with the requested cropRegion since
+ the HAL may adjust the crop region to account for rounding, conversion error, or other
+ hardware limitations.
+
+ HAL2.x uses only (x, y, width)
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ </controls>
+ <static>
+ <entry name="availableFormats" type="int32"
+ visibility="hidden" deprecated="true" enum="true"
+ container="array" typedef="imageFormat">
+ <array>
+ <size>n</size>
+ </array>
+ <enum>
+ <value optional="true" id="0x20">RAW16
+ <notes>
+ RAW16 is a standard, cross-platform format for raw image
+ buffers with 16-bit pixels.
+
+ Buffers of this format are typically expected to have a
+ Bayer Color Filter Array (CFA) layout, which is given in
+ android.sensor.info.colorFilterArrangement. Sensors with
+ CFAs that are not representable by a format in
+ android.sensor.info.colorFilterArrangement should not
+ use this format.
+
+ Buffers of this format will also follow the constraints given for
+ RAW_OPAQUE buffers, but with relaxed performance constraints.
+
+ This format is intended to give users access to the full contents
+ of the buffers coming directly from the image sensor prior to any
+ cropping or scaling operations, and all coordinate systems for
+ metadata used for this format are relative to the size of the
+ active region of the image sensor before any geometric distortion
+ correction has been applied (i.e.
+ android.sensor.info.preCorrectionActiveArraySize). Supported
+ dimensions for this format are limited to the full dimensions of
+ the sensor (e.g. either android.sensor.info.pixelArraySize or
+ android.sensor.info.preCorrectionActiveArraySize will be the
+ only supported output size).
+
+ See android.scaler.availableInputOutputFormatsMap for
+ the full set of performance guarantees.
+ </notes>
+ </value>
+ <value optional="true" id="0x24">RAW_OPAQUE
+ <notes>
+ RAW_OPAQUE (or
+ {@link android.graphics.ImageFormat#RAW_PRIVATE RAW_PRIVATE}
+ as referred in public API) is a format for raw image buffers
+ coming from an image sensor.
+
+ The actual structure of buffers of this format is
+ platform-specific, but must follow several constraints:
+
+ 1. No image post-processing operations may have been applied to
+ buffers of this type. These buffers contain raw image data coming
+ directly from the image sensor.
+ 1. If a buffer of this format is passed to the camera device for
+ reprocessing, the resulting images will be identical to the images
+ produced if the buffer had come directly from the sensor and was
+ processed with the same settings.
+
+ The intended use for this format is to allow access to the native
+ raw format buffers coming directly from the camera sensor without
+ any additional conversions or decrease in framerate.
+
+ See android.scaler.availableInputOutputFormatsMap for the full set of
+ performance guarantees.
+ </notes>
+ </value>
+ <value optional="true" id="0x32315659">YV12
+ <notes>YCrCb 4:2:0 Planar</notes>
+ </value>
+ <value optional="true" id="0x11">YCrCb_420_SP
+ <notes>NV21</notes>
+ </value>
+ <value id="0x22">IMPLEMENTATION_DEFINED
+ <notes>System internal format, not application-accessible</notes>
+ </value>
+ <value id="0x23">YCbCr_420_888
+ <notes>Flexible YUV420 Format</notes>
+ </value>
+ <value id="0x21">BLOB
+ <notes>JPEG format</notes>
+ </value>
+ </enum>
+ <description>The list of image formats that are supported by this
+ camera device for output streams.</description>
+ <details>
+ All camera devices will support JPEG and YUV_420_888 formats.
+
+ When set to YUV_420_888, application can access the YUV420 data directly.
+ </details>
+ <hal_details>
+ These format values are from HAL_PIXEL_FORMAT_* in
+ system/core/include/system/graphics.h.
+
+ When IMPLEMENTATION_DEFINED is used, the platform
+ gralloc module will select a format based on the usage flags provided
+ by the camera HAL device and the other endpoint of the stream. It is
+ usually used by preview and recording streams, where the application doesn't
+ need access the image data.
+
+ YCbCr_420_888 format must be supported by the HAL. When an image stream
+ needs CPU/application direct access, this format will be used.
+
+ The BLOB format must be supported by the HAL. This is used for the JPEG stream.
+
+ A RAW_OPAQUE buffer should contain only pixel data. It is strongly
+ recommended that any information used by the camera device when
+ processing images is fully expressed by the result metadata
+ for that image buffer.
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ <entry name="availableJpegMinDurations" type="int64" visibility="hidden" deprecated="true"
+ container="array">
+ <array>
+ <size>n</size>
+ </array>
+ <description>The minimum frame duration that is supported
+ for each resolution in android.scaler.availableJpegSizes.
+ </description>
+ <units>Nanoseconds</units>
+ <range>TODO: Remove property.</range>
+ <details>
+ This corresponds to the minimum steady-state frame duration when only
+ that JPEG stream is active and captured in a burst, with all
+ processing (typically in android.*.mode) set to FAST.
+
+ When multiple streams are configured, the minimum
+ frame duration will be &gt;= max(individual stream min
+ durations)</details>
+ <tag id="BC" />
+ </entry>
+ <entry name="availableJpegSizes" type="int32" visibility="hidden"
+ deprecated="true" container="array" typedef="size">
+ <array>
+ <size>n</size>
+ <size>2</size>
+ </array>
+ <description>The JPEG resolutions that are supported by this camera device.</description>
+ <range>TODO: Remove property.</range>
+ <details>
+ The resolutions are listed as `(width, height)` pairs. All camera devices will support
+ sensor maximum resolution (defined by android.sensor.info.activeArraySize).
+ </details>
+ <hal_details>
+ The HAL must include sensor maximum resolution
+ (defined by android.sensor.info.activeArraySize),
+ and should include half/quarter of sensor maximum resolution.
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ <entry name="availableMaxDigitalZoom" type="float" visibility="public"
+ hwlevel="legacy">
+ <description>The maximum ratio between both active area width
+ and crop region width, and active area height and
+ crop region height, for android.scaler.cropRegion.
+ </description>
+ <units>Zoom scale factor</units>
+ <range>&gt;=1</range>
+ <details>
+ This represents the maximum amount of zooming possible by
+ the camera device, or equivalently, the minimum cropping
+ window size.
+
+ Crop regions that have a width or height that is smaller
+ than this ratio allows will be rounded up to the minimum
+ allowed size by the camera device.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="availableProcessedMinDurations" type="int64" visibility="hidden" deprecated="true"
+ container="array">
+ <array>
+ <size>n</size>
+ </array>
+ <description>For each available processed output size (defined in
+ android.scaler.availableProcessedSizes), this property lists the
+ minimum supportable frame duration for that size.
+ </description>
+ <units>Nanoseconds</units>
+ <details>
+ This should correspond to the frame duration when only that processed
+ stream is active, with all processing (typically in android.*.mode)
+ set to FAST.
+
+ When multiple streams are configured, the minimum frame duration will
+ be &gt;= max(individual stream min durations).
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="availableProcessedSizes" type="int32" visibility="hidden"
+ deprecated="true" container="array" typedef="size">
+ <array>
+ <size>n</size>
+ <size>2</size>
+ </array>
+ <description>The resolutions available for use with
+ processed output streams, such as YV12, NV12, and
+ platform opaque YUV/RGB streams to the GPU or video
+ encoders.</description>
+ <details>
+ The resolutions are listed as `(width, height)` pairs.
+
+ For a given use case, the actual maximum supported resolution
+ may be lower than what is listed here, depending on the destination
+ Surface for the image data. For example, for recording video,
+ the video encoder chosen may have a maximum size limit (e.g. 1080p)
+ smaller than what the camera (e.g. maximum resolution is 3264x2448)
+ can provide.
+
+ Please reference the documentation for the image data destination to
+ check if it limits the maximum size for image data.
+ </details>
+ <hal_details>
+ For FULL capability devices (`android.info.supportedHardwareLevel == FULL`),
+ the HAL must include all JPEG sizes listed in android.scaler.availableJpegSizes
+ and each below resolution if it is smaller than or equal to the sensor
+ maximum resolution (if they are not listed in JPEG sizes already):
+
+ * 240p (320 x 240)
+ * 480p (640 x 480)
+ * 720p (1280 x 720)
+ * 1080p (1920 x 1080)
+
+ For LIMITED capability devices (`android.info.supportedHardwareLevel == LIMITED`),
+ the HAL only has to list up to the maximum video size supported by the devices.
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ <entry name="availableRawMinDurations" type="int64" deprecated="true"
+ container="array">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ For each available raw output size (defined in
+ android.scaler.availableRawSizes), this property lists the minimum
+ supportable frame duration for that size.
+ </description>
+ <units>Nanoseconds</units>
+ <details>
+ Should correspond to the frame duration when only the raw stream is
+ active.
+
+ When multiple streams are configured, the minimum
+ frame duration will be &gt;= max(individual stream min
+ durations)</details>
+ <tag id="BC" />
+ </entry>
+ <entry name="availableRawSizes" type="int32" deprecated="true"
+ container="array" typedef="size">
+ <array>
+ <size>n</size>
+ <size>2</size>
+ </array>
+ <description>The resolutions available for use with raw
+ sensor output streams, listed as width,
+ height</description>
+ </entry>
+ </static>
+ <dynamic>
+ <clone entry="android.scaler.cropRegion" kind="controls">
+ </clone>
+ </dynamic>
+ <static>
+ <entry name="availableInputOutputFormatsMap" type="int32" visibility="hidden"
+ typedef="reprocessFormatsMap">
+ <description>The mapping of image formats that are supported by this
+ camera device for input streams, to their corresponding output formats.
+ </description>
+ <details>
+ All camera devices with at least 1
+ android.request.maxNumInputStreams will have at least one
+ available input format.
+
+ The camera device will support the following map of formats,
+ if its dependent capability (android.request.availableCapabilities) is supported:
+
+ Input Format | Output Format | Capability
+ :-------------------------------------------------|:--------------------------------------------------|:----------
+ {@link android.graphics.ImageFormat#PRIVATE} | {@link android.graphics.ImageFormat#JPEG} | PRIVATE_REPROCESSING
+ {@link android.graphics.ImageFormat#PRIVATE} | {@link android.graphics.ImageFormat#YUV_420_888} | PRIVATE_REPROCESSING
+ {@link android.graphics.ImageFormat#YUV_420_888} | {@link android.graphics.ImageFormat#JPEG} | YUV_REPROCESSING
+ {@link android.graphics.ImageFormat#YUV_420_888} | {@link android.graphics.ImageFormat#YUV_420_888} | YUV_REPROCESSING
+
+ PRIVATE refers to a device-internal format that is not directly application-visible. A
+ PRIVATE input surface can be acquired by {@link android.media.ImageReader#newInstance}
+ with {@link android.graphics.ImageFormat#PRIVATE} as the format.
+
+ For a PRIVATE_REPROCESSING-capable camera device, using the PRIVATE format as either input
+ or output will never hurt maximum frame rate (i.e. {@link
+ android.hardware.camera2.params.StreamConfigurationMap#getOutputStallDuration
+ getOutputStallDuration(ImageFormat.PRIVATE, size)} is always 0),
+
+ Attempting to configure an input stream with output streams not
+ listed as available in this map is not valid.
+ </details>
+ <hal_details>
+ For the formats, see `system/core/include/system/graphics.h` for a definition
+ of the image format enumerations. The PRIVATE format refers to the
+ HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED format. The HAL could determine
+ the actual format by using the gralloc usage flags.
+ For ZSL use case in particular, the HAL could choose appropriate format (partially
+ processed YUV or RAW based format) by checking the format and GRALLOC_USAGE_HW_CAMERA_ZSL.
+ See camera3.h for more details.
+
+ This value is encoded as a variable-size array-of-arrays.
+ The inner array always contains `[format, length, ...]` where
+ `...` has `length` elements. An inner array is followed by another
+ inner array if the total metadata entry size hasn't yet been exceeded.
+
+ A code sample to read/write this encoding (with a device that
+ supports reprocessing IMPLEMENTATION_DEFINED to YUV_420_888, and JPEG,
+ and reprocessing YUV_420_888 to YUV_420_888 and JPEG):
+
+ // reading
+ int32_t* contents = &entry.i32[0];
+ for (size_t i = 0; i < entry.count; ) {
+ int32_t format = contents[i++];
+ int32_t length = contents[i++];
+ int32_t output_formats[length];
+ memcpy(&output_formats[0], &contents[i],
+ length * sizeof(int32_t));
+ i += length;
+ }
+
+ // writing (static example, PRIVATE_REPROCESSING + YUV_REPROCESSING)
+ int32_t[] contents = {
+ IMPLEMENTATION_DEFINED, 2, YUV_420_888, BLOB,
+ YUV_420_888, 2, YUV_420_888, BLOB,
+ };
+ update_camera_metadata_entry(metadata, index, &contents[0],
+ sizeof(contents)/sizeof(contents[0]), &updated_entry);
+
+ If the HAL claims to support any of the capabilities listed in the
+ above details, then it must also support all the input-output
+ combinations listed for that capability. It can optionally support
+ additional formats if it so chooses.
+ </hal_details>
+ <tag id="REPROC" />
+ </entry>
+ <entry name="availableStreamConfigurations" type="int32" visibility="ndk_public"
+ enum="true" container="array" typedef="streamConfiguration" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ <size>4</size>
+ </array>
+ <enum>
+ <value>OUTPUT</value>
+ <value>INPUT</value>
+ </enum>
+ <description>The available stream configurations that this
+ camera device supports
+ (i.e. format, width, height, output/input stream).
+ </description>
+ <details>
+ The configurations are listed as `(format, width, height, input?)`
+ tuples.
+
+ For a given use case, the actual maximum supported resolution
+ may be lower than what is listed here, depending on the destination
+ Surface for the image data. For example, for recording video,
+ the video encoder chosen may have a maximum size limit (e.g. 1080p)
+ smaller than what the camera (e.g. maximum resolution is 3264x2448)
+ can provide.
+
+ Please reference the documentation for the image data destination to
+ check if it limits the maximum size for image data.
+
+ Not all output formats may be supported in a configuration with
+ an input stream of a particular format. For more details, see
+ android.scaler.availableInputOutputFormatsMap.
+
+ The following table describes the minimum required output stream
+ configurations based on the hardware level
+ (android.info.supportedHardwareLevel):
+
+ Format | Size | Hardware Level | Notes
+ :-------------:|:--------------------------------------------:|:--------------:|:--------------:
+ JPEG | android.sensor.info.activeArraySize | Any |
+ JPEG | 1920x1080 (1080p) | Any | if 1080p <= activeArraySize
+ JPEG | 1280x720 (720) | Any | if 720p <= activeArraySize
+ JPEG | 640x480 (480p) | Any | if 480p <= activeArraySize
+ JPEG | 320x240 (240p) | Any | if 240p <= activeArraySize
+ YUV_420_888 | all output sizes available for JPEG | FULL |
+ YUV_420_888 | all output sizes available for JPEG, up to the maximum video size | LIMITED |
+ IMPLEMENTATION_DEFINED | same as YUV_420_888 | Any |
+
+ Refer to android.request.availableCapabilities for additional
+ mandatory stream configurations on a per-capability basis.
+ </details>
+ <hal_details>
+ It is recommended (but not mandatory) to also include half/quarter
+ of sensor maximum resolution for JPEG formats (regardless of hardware
+ level).
+
+ (The following is a rewording of the above required table):
+
+ For JPEG format, the sizes may be restricted by below conditions:
+
+ * The HAL may choose the aspect ratio of each Jpeg size to be one of well known ones
+ (e.g. 4:3, 16:9, 3:2 etc.). If the sensor maximum resolution
+ (defined by android.sensor.info.activeArraySize) has an aspect ratio other than these,
+ it does not have to be included in the supported JPEG sizes.
+ * Some hardware JPEG encoders may have pixel boundary alignment requirements, such as
+ the dimensions being a multiple of 16.
+
+ Therefore, the maximum JPEG size may be smaller than sensor maximum resolution.
+ However, the largest JPEG size must be as close as possible to the sensor maximum
+ resolution given above constraints. It is required that after aspect ratio adjustments,
+ additional size reduction due to other issues must be less than 3% in area. For example,
+ if the sensor maximum resolution is 3280x2464, if the maximum JPEG size has aspect
+ ratio 4:3, the JPEG encoder alignment requirement is 16, the maximum JPEG size will be
+ 3264x2448.
+
+ For FULL capability devices (`android.info.supportedHardwareLevel == FULL`),
+ the HAL must include all YUV_420_888 sizes that have JPEG sizes listed
+ here as output streams.
+
+ It must also include each below resolution if it is smaller than or
+ equal to the sensor maximum resolution (for both YUV_420_888 and JPEG
+ formats), as output streams:
+
+ * 240p (320 x 240)
+ * 480p (640 x 480)
+ * 720p (1280 x 720)
+ * 1080p (1920 x 1080)
+
+ For LIMITED capability devices
+ (`android.info.supportedHardwareLevel == LIMITED`),
+ the HAL only has to list up to the maximum video size
+ supported by the device.
+
+ Regardless of hardware level, every output resolution available for
+ YUV_420_888 must also be available for IMPLEMENTATION_DEFINED.
+
+ This supercedes the following fields, which are now deprecated:
+
+ * availableFormats
+ * available[Processed,Raw,Jpeg]Sizes
+ </hal_details>
+ </entry>
+ <entry name="availableMinFrameDurations" type="int64" visibility="ndk_public"
+ container="array" typedef="streamConfigurationDuration" hwlevel="legacy">
+ <array>
+ <size>4</size>
+ <size>n</size>
+ </array>
+ <description>This lists the minimum frame duration for each
+ format/size combination.
+ </description>
+ <units>(format, width, height, ns) x n</units>
+ <details>
+ This should correspond to the frame duration when only that
+ stream is active, with all processing (typically in android.*.mode)
+ set to either OFF or FAST.
+
+ When multiple streams are used in a request, the minimum frame
+ duration will be max(individual stream min durations).
+
+ The minimum frame duration of a stream (of a particular format, size)
+ is the same regardless of whether the stream is input or output.
+
+ See android.sensor.frameDuration and
+ android.scaler.availableStallDurations for more details about
+ calculating the max frame rate.
+ </details>
+ <tag id="V1" />
+ </entry>
+ <entry name="availableStallDurations" type="int64" visibility="ndk_public"
+ container="array" typedef="streamConfigurationDuration" hwlevel="legacy">
+ <array>
+ <size>4</size>
+ <size>n</size>
+ </array>
+ <description>This lists the maximum stall duration for each
+ output format/size combination.
+ </description>
+ <units>(format, width, height, ns) x n</units>
+ <details>
+ A stall duration is how much extra time would get added
+ to the normal minimum frame duration for a repeating request
+ that has streams with non-zero stall.
+
+ For example, consider JPEG captures which have the following
+ characteristics:
+
+ * JPEG streams act like processed YUV streams in requests for which
+ they are not included; in requests in which they are directly
+ referenced, they act as JPEG streams. This is because supporting a
+ JPEG stream requires the underlying YUV data to always be ready for
+ use by a JPEG encoder, but the encoder will only be used (and impact
+ frame duration) on requests that actually reference a JPEG stream.
+ * The JPEG processor can run concurrently to the rest of the camera
+ pipeline, but cannot process more than 1 capture at a time.
+
+ In other words, using a repeating YUV request would result
+ in a steady frame rate (let's say it's 30 FPS). If a single
+ JPEG request is submitted periodically, the frame rate will stay
+ at 30 FPS (as long as we wait for the previous JPEG to return each
+ time). If we try to submit a repeating YUV + JPEG request, then
+ the frame rate will drop from 30 FPS.
+
+ In general, submitting a new request with a non-0 stall time
+ stream will _not_ cause a frame rate drop unless there are still
+ outstanding buffers for that stream from previous requests.
+
+ Submitting a repeating request with streams (call this `S`)
+ is the same as setting the minimum frame duration from
+ the normal minimum frame duration corresponding to `S`, added with
+ the maximum stall duration for `S`.
+
+ If interleaving requests with and without a stall duration,
+ a request will stall by the maximum of the remaining times
+ for each can-stall stream with outstanding buffers.
+
+ This means that a stalling request will not have an exposure start
+ until the stall has completed.
+
+ This should correspond to the stall duration when only that stream is
+ active, with all processing (typically in android.*.mode) set to FAST
+ or OFF. Setting any of the processing modes to HIGH_QUALITY
+ effectively results in an indeterminate stall duration for all
+ streams in a request (the regular stall calculation rules are
+ ignored).
+
+ The following formats may always have a stall duration:
+
+ * {@link AIMAGE_FORMAT_JPEG}
+ * {@link AIMAGE_FORMAT_RAW16}
+
+ The following formats will never have a stall duration:
+
+ * {@link AIMAGE_FORMAT_YUV_420_888}
+ * {@link AIMAGE_FORMAT_RAW10}
+
+ All other formats may or may not have an allowed stall duration on
+ a per-capability basis; refer to android.request.availableCapabilities
+ for more details.
+
+ See android.sensor.frameDuration for more information about
+ calculating the max frame rate (absent stalls).
+ </details>
+ <hal_details>
+ If possible, it is recommended that all non-JPEG formats
+ (such as RAW16) should not have a stall duration. RAW10, RAW12, RAW_OPAQUE
+ and IMPLEMENTATION_DEFINED must not have stall durations.
+ </hal_details>
+ <tag id="V1" />
+ </entry>
+ <entry name="streamConfigurationMap" type="int32" visibility="java_public"
+ synthetic="true" typedef="streamConfigurationMap"
+ hwlevel="legacy">
+ <description>The available stream configurations that this
+ camera device supports; also includes the minimum frame durations
+ and the stall durations for each format/size combination.
+ </description>
+ <details>
+ All camera devices will support sensor maximum resolution (defined by
+ android.sensor.info.activeArraySize) for the JPEG format.
+
+ For a given use case, the actual maximum supported resolution
+ may be lower than what is listed here, depending on the destination
+ Surface for the image data. For example, for recording video,
+ the video encoder chosen may have a maximum size limit (e.g. 1080p)
+ smaller than what the camera (e.g. maximum resolution is 3264x2448)
+ can provide.
+
+ Please reference the documentation for the image data destination to
+ check if it limits the maximum size for image data.
+
+ The following table describes the minimum required output stream
+ configurations based on the hardware level
+ (android.info.supportedHardwareLevel):
+
+ Format | Size | Hardware Level | Notes
+ :-------------------------------------------------:|:--------------------------------------------:|:--------------:|:--------------:
+ {@link android.graphics.ImageFormat#JPEG} | android.sensor.info.activeArraySize (*1) | Any |
+ {@link android.graphics.ImageFormat#JPEG} | 1920x1080 (1080p) | Any | if 1080p <= activeArraySize
+ {@link android.graphics.ImageFormat#JPEG} | 1280x720 (720p) | Any | if 720p <= activeArraySize
+ {@link android.graphics.ImageFormat#JPEG} | 640x480 (480p) | Any | if 480p <= activeArraySize
+ {@link android.graphics.ImageFormat#JPEG} | 320x240 (240p) | Any | if 240p <= activeArraySize
+ {@link android.graphics.ImageFormat#YUV_420_888} | all output sizes available for JPEG | FULL |
+ {@link android.graphics.ImageFormat#YUV_420_888} | all output sizes available for JPEG, up to the maximum video size | LIMITED |
+ {@link android.graphics.ImageFormat#PRIVATE} | same as YUV_420_888 | Any |
+
+ Refer to android.request.availableCapabilities and {@link
+ android.hardware.camera2.CameraDevice#createCaptureSession} for additional mandatory
+ stream configurations on a per-capability basis.
+
+ *1: For JPEG format, the sizes may be restricted by below conditions:
+
+ * The HAL may choose the aspect ratio of each Jpeg size to be one of well known ones
+ (e.g. 4:3, 16:9, 3:2 etc.). If the sensor maximum resolution
+ (defined by android.sensor.info.activeArraySize) has an aspect ratio other than these,
+ it does not have to be included in the supported JPEG sizes.
+ * Some hardware JPEG encoders may have pixel boundary alignment requirements, such as
+ the dimensions being a multiple of 16.
+ Therefore, the maximum JPEG size may be smaller than sensor maximum resolution.
+ However, the largest JPEG size will be as close as possible to the sensor maximum
+ resolution given above constraints. It is required that after aspect ratio adjustments,
+ additional size reduction due to other issues must be less than 3% in area. For example,
+ if the sensor maximum resolution is 3280x2464, if the maximum JPEG size has aspect
+ ratio 4:3, and the JPEG encoder alignment requirement is 16, the maximum JPEG size will be
+ 3264x2448.
+ </details>
+ <hal_details>
+ Do not set this property directly
+ (it is synthetic and will not be available at the HAL layer);
+ set the android.scaler.availableStreamConfigurations instead.
+
+ Not all output formats may be supported in a configuration with
+ an input stream of a particular format. For more details, see
+ android.scaler.availableInputOutputFormatsMap.
+
+ It is recommended (but not mandatory) to also include half/quarter
+ of sensor maximum resolution for JPEG formats (regardless of hardware
+ level).
+
+ (The following is a rewording of the above required table):
+
+ The HAL must include sensor maximum resolution (defined by
+ android.sensor.info.activeArraySize).
+
+ For FULL capability devices (`android.info.supportedHardwareLevel == FULL`),
+ the HAL must include all YUV_420_888 sizes that have JPEG sizes listed
+ here as output streams.
+
+ It must also include each below resolution if it is smaller than or
+ equal to the sensor maximum resolution (for both YUV_420_888 and JPEG
+ formats), as output streams:
+
+ * 240p (320 x 240)
+ * 480p (640 x 480)
+ * 720p (1280 x 720)
+ * 1080p (1920 x 1080)
+
+ For LIMITED capability devices
+ (`android.info.supportedHardwareLevel == LIMITED`),
+ the HAL only has to list up to the maximum video size
+ supported by the device.
+
+ Regardless of hardware level, every output resolution available for
+ YUV_420_888 must also be available for IMPLEMENTATION_DEFINED.
+
+ This supercedes the following fields, which are now deprecated:
+
+ * availableFormats
+ * available[Processed,Raw,Jpeg]Sizes
+ </hal_details>
+ </entry>
+ <entry name="croppingType" type="byte" visibility="public" enum="true"
+ hwlevel="legacy">
+ <enum>
+ <value>CENTER_ONLY
+ <notes>
+ The camera device only supports centered crop regions.
+ </notes>
+ </value>
+ <value>FREEFORM
+ <notes>
+ The camera device supports arbitrarily chosen crop regions.
+ </notes>
+ </value>
+ </enum>
+ <description>The crop type that this camera device supports.</description>
+ <details>
+ When passing a non-centered crop region (android.scaler.cropRegion) to a camera
+ device that only supports CENTER_ONLY cropping, the camera device will move the
+ crop region to the center of the sensor active array (android.sensor.info.activeArraySize)
+ and keep the crop region width and height unchanged. The camera device will return the
+ final used crop region in metadata result android.scaler.cropRegion.
+
+ Camera devices that support FREEFORM cropping will support any crop region that
+ is inside of the active array. The camera device will apply the same crop region and
+ return the final used crop region in capture result metadata android.scaler.cropRegion.
+
+ LEGACY capability devices will only support CENTER_ONLY cropping.
+ </details>
+ </entry>
+ </static>
+ </section>
+ <section name="sensor">
+ <controls>
+ <entry name="exposureTime" type="int64" visibility="public" hwlevel="full">
+ <description>Duration each pixel is exposed to
+ light.</description>
+ <units>Nanoseconds</units>
+ <range>android.sensor.info.exposureTimeRange</range>
+ <details>If the sensor can't expose this exact duration, it will shorten the
+ duration exposed to the nearest possible value (rather than expose longer).
+ The final exposure time used will be available in the output capture result.
+
+ This control is only effective if android.control.aeMode or android.control.mode is set to
+ OFF; otherwise the auto-exposure algorithm will override this value.
+ </details>
+ <tag id="V1" />
+ </entry>
+ <entry name="frameDuration" type="int64" visibility="public" hwlevel="full">
+ <description>Duration from start of frame exposure to
+ start of next frame exposure.</description>
+ <units>Nanoseconds</units>
+ <range>See android.sensor.info.maxFrameDuration,
+ ACAMERA_SCALER_AVAILABLE_MIN_FRAME_DURATIONS. The duration
+ is capped to `max(duration, exposureTime + overhead)`.</range>
+ <details>
+ The maximum frame rate that can be supported by a camera subsystem is
+ a function of many factors:
+
+ * Requested resolutions of output image streams
+ * Availability of binning / skipping modes on the imager
+ * The bandwidth of the imager interface
+ * The bandwidth of the various ISP processing blocks
+
+ Since these factors can vary greatly between different ISPs and
+ sensors, the camera abstraction tries to represent the bandwidth
+ restrictions with as simple a model as possible.
+
+ The model presented has the following characteristics:
+
+ * The image sensor is always configured to output the smallest
+ resolution possible given the application's requested output stream
+ sizes. The smallest resolution is defined as being at least as large
+ as the largest requested output stream size; the camera pipeline must
+ never digitally upsample sensor data when the crop region covers the
+ whole sensor. In general, this means that if only small output stream
+ resolutions are configured, the sensor can provide a higher frame
+ rate.
+ * Since any request may use any or all the currently configured
+ output streams, the sensor and ISP must be configured to support
+ scaling a single capture to all the streams at the same time. This
+ means the camera pipeline must be ready to produce the largest
+ requested output size without any delay. Therefore, the overall
+ frame rate of a given configured stream set is governed only by the
+ largest requested stream resolution.
+ * Using more than one output stream in a request does not affect the
+ frame duration.
+ * Certain format-streams may need to do additional background processing
+ before data is consumed/produced by that stream. These processors
+ can run concurrently to the rest of the camera pipeline, but
+ cannot process more than 1 capture at a time.
+
+ The necessary information for the application, given the model above,
+ is provided via
+ {@link ACAMERA_SCALER_AVAILABLE_MIN_FRAME_DURATIONS}.
+ These are used to determine the maximum frame rate / minimum frame
+ duration that is possible for a given stream configuration.
+
+ Specifically, the application can use the following rules to
+ determine the minimum frame duration it can request from the camera
+ device:
+
+ 1. Let the set of currently configured input/output streams
+ be called `S`.
+ 1. Find the minimum frame durations for each stream in `S`, by looking
+ it up in {@link ACAMERA_SCALER_AVAILABLE_MIN_FRAME_DURATIONS}
+ (with its respective size/format). Let this set of frame durations be
+ called `F`.
+ 1. For any given request `R`, the minimum frame duration allowed
+ for `R` is the maximum out of all values in `F`. Let the streams
+ used in `R` be called `S_r`.
+
+ If none of the streams in `S_r` have a stall time (listed in {@link
+ ACAMERA_SCALER_AVAILABLE_STALL_DURATIONS}
+ using its respective size/format), then the frame duration in `F`
+ determines the steady state frame rate that the application will get
+ if it uses `R` as a repeating request. Let this special kind of
+ request be called `Rsimple`.
+
+ A repeating request `Rsimple` can be _occasionally_ interleaved
+ by a single capture of a new request `Rstall` (which has at least
+ one in-use stream with a non-0 stall time) and if `Rstall` has the
+ same minimum frame duration this will not cause a frame rate loss
+ if all buffers from the previous `Rstall` have already been
+ delivered.
+
+ For more details about stalling, see
+ {@link ACAMERA_SCALER_AVAILABLE_STALL_DURATIONS}.
+
+ This control is only effective if android.control.aeMode or android.control.mode is set to
+ OFF; otherwise the auto-exposure algorithm will override this value.
+ </details>
+ <hal_details>
+ For more details about stalling, see
+ android.scaler.availableStallDurations.
+ </hal_details>
+ <tag id="V1" />
+ </entry>
+ <entry name="sensitivity" type="int32" visibility="public" hwlevel="full">
+ <description>The amount of gain applied to sensor data
+ before processing.</description>
+ <units>ISO arithmetic units</units>
+ <range>android.sensor.info.sensitivityRange</range>
+ <details>
+ The sensitivity is the standard ISO sensitivity value,
+ as defined in ISO 12232:2006.
+
+ The sensitivity must be within android.sensor.info.sensitivityRange, and
+ if if it less than android.sensor.maxAnalogSensitivity, the camera device
+ is guaranteed to use only analog amplification for applying the gain.
+
+ If the camera device cannot apply the exact sensitivity
+ requested, it will reduce the gain to the nearest supported
+ value. The final sensitivity used will be available in the
+ output capture result.
+
+ This control is only effective if android.control.aeMode or android.control.mode is set to
+ OFF; otherwise the auto-exposure algorithm will override this value.
+ </details>
+ <hal_details>ISO 12232:2006 REI method is acceptable.</hal_details>
+ <tag id="V1" />
+ </entry>
+ </controls>
+ <static>
+ <namespace name="info">
+ <entry name="activeArraySize" type="int32" visibility="public"
+ type_notes="Four ints defining the active pixel rectangle"
+ container="array" typedef="rectangle" hwlevel="legacy">
+ <array>
+ <size>4</size>
+ </array>
+ <description>
+ The area of the image sensor which corresponds to active pixels after any geometric
+ distortion correction has been applied.
+ </description>
+ <units>Pixel coordinates on the image sensor</units>
+ <details>
+ This is the rectangle representing the size of the active region of the sensor (i.e.
+ the region that actually receives light from the scene) after any geometric correction
+ has been applied, and should be treated as the maximum size in pixels of any of the
+ image output formats aside from the raw formats.
+
+ This rectangle is defined relative to the full pixel array; (0,0) is the top-left of
+ the full pixel array, and the size of the full pixel array is given by
+ android.sensor.info.pixelArraySize.
+
+ The data representation is int[4], which maps to (left, top, width, height).
+
+ The coordinate system for most other keys that list pixel coordinates, including
+ android.scaler.cropRegion, is defined relative to the active array rectangle given in
+ this field, with `(0, 0)` being the top-left of this rectangle.
+
+ The active array may be smaller than the full pixel array, since the full array may
+ include black calibration pixels or other inactive regions, and geometric correction
+ resulting in scaling or cropping may have been applied.
+ </details>
+ <hal_details>
+ This array contains `(xmin, ymin, width, height)`. The `(xmin, ymin)` must be
+ &gt;= `(0,0)`.
+ The `(width, height)` must be &lt;= `android.sensor.info.pixelArraySize`.
+ </hal_details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="sensitivityRange" type="int32" visibility="public"
+ type_notes="Range of supported sensitivities"
+ container="array" typedef="rangeInt"
+ hwlevel="full">
+ <array>
+ <size>2</size>
+ </array>
+ <description>Range of sensitivities for android.sensor.sensitivity supported by this
+ camera device.</description>
+ <range>Min <= 100, Max &gt;= 800</range>
+ <details>
+ The values are the standard ISO sensitivity values,
+ as defined in ISO 12232:2006.
+ </details>
+
+ <tag id="BC" />
+ <tag id="V1" />
+ </entry>
+ <entry name="colorFilterArrangement" type="byte" visibility="public" enum="true"
+ hwlevel="full">
+ <enum>
+ <value>RGGB</value>
+ <value>GRBG</value>
+ <value>GBRG</value>
+ <value>BGGR</value>
+ <value>RGB
+ <notes>Sensor is not Bayer; output has 3 16-bit
+ values for each pixel, instead of just 1 16-bit value
+ per pixel.</notes></value>
+ </enum>
+ <description>The arrangement of color filters on sensor;
+ represents the colors in the top-left 2x2 section of
+ the sensor, in reading order.</description>
+ <tag id="RAW" />
+ </entry>
+ <entry name="exposureTimeRange" type="int64" visibility="public"
+ type_notes="nanoseconds" container="array" typedef="rangeLong"
+ hwlevel="full">
+ <array>
+ <size>2</size>
+ </array>
+ <description>The range of image exposure times for android.sensor.exposureTime supported
+ by this camera device.
+ </description>
+ <units>Nanoseconds</units>
+ <range>The minimum exposure time will be less than 100 us. For FULL
+ capability devices (android.info.supportedHardwareLevel == FULL),
+ the maximum exposure time will be greater than 100ms.</range>
+ <hal_details>For FULL capability devices (android.info.supportedHardwareLevel == FULL),
+ The maximum of the range SHOULD be at least 1 second (1e9), MUST be at least
+ 100ms.
+ </hal_details>
+ <tag id="V1" />
+ </entry>
+ <entry name="maxFrameDuration" type="int64" visibility="public"
+ hwlevel="full">
+ <description>The maximum possible frame duration (minimum frame rate) for
+ android.sensor.frameDuration that is supported this camera device.</description>
+ <units>Nanoseconds</units>
+ <range>For FULL capability devices
+ (android.info.supportedHardwareLevel == FULL), at least 100ms.
+ </range>
+ <details>Attempting to use frame durations beyond the maximum will result in the frame
+ duration being clipped to the maximum. See that control for a full definition of frame
+ durations.
+
+ Refer to {@link
+ ACAMERA_SCALER_AVAILABLE_MIN_FRAME_DURATIONS}
+ for the minimum frame duration values.
+ </details>
+ <hal_details>
+ For FULL capability devices (android.info.supportedHardwareLevel == FULL),
+ The maximum of the range SHOULD be at least
+ 1 second (1e9), MUST be at least 100ms (100e6).
+
+ android.sensor.info.maxFrameDuration must be greater or
+ equal to the android.sensor.info.exposureTimeRange max
+ value (since exposure time overrides frame duration).
+
+ Available minimum frame durations for JPEG must be no greater
+ than that of the YUV_420_888/IMPLEMENTATION_DEFINED
+ minimum frame durations (for that respective size).
+
+ Since JPEG processing is considered offline and can take longer than
+ a single uncompressed capture, refer to
+ android.scaler.availableStallDurations
+ for details about encoding this scenario.
+ </hal_details>
+ <tag id="V1" />
+ </entry>
+ <entry name="physicalSize" type="float" visibility="public"
+ type_notes="width x height"
+ container="array" typedef="sizeF" hwlevel="legacy">
+ <array>
+ <size>2</size>
+ </array>
+ <description>The physical dimensions of the full pixel
+ array.</description>
+ <units>Millimeters</units>
+ <details>This is the physical size of the sensor pixel
+ array defined by android.sensor.info.pixelArraySize.
+ </details>
+ <hal_details>Needed for FOV calculation for old API</hal_details>
+ <tag id="V1" />
+ <tag id="BC" />
+ </entry>
+ <entry name="pixelArraySize" type="int32" visibility="public"
+ container="array" typedef="size" hwlevel="legacy">
+ <array>
+ <size>2</size>
+ </array>
+ <description>Dimensions of the full pixel array, possibly
+ including black calibration pixels.</description>
+ <units>Pixels</units>
+ <details>The pixel count of the full pixel array of the image sensor, which covers
+ android.sensor.info.physicalSize area. This represents the full pixel dimensions of
+ the raw buffers produced by this sensor.
+
+ If a camera device supports raw sensor formats, either this or
+ android.sensor.info.preCorrectionActiveArraySize is the maximum dimensions for the raw
+ output formats listed in ACAMERA_SCALER_AVAILABLE_STREAM_CONFIGURATIONS (this depends on
+ whether or not the image sensor returns buffers containing pixels that are not
+ part of the active array region for blacklevel calibration or other purposes).
+
+ Some parts of the full pixel array may not receive light from the scene,
+ or be otherwise inactive. The android.sensor.info.preCorrectionActiveArraySize key
+ defines the rectangle of active pixels that will be included in processed image
+ formats.
+ </details>
+ <tag id="RAW" />
+ <tag id="BC" />
+ </entry>
+ <entry name="whiteLevel" type="int32" visibility="public">
+ <description>
+ Maximum raw value output by sensor.
+ </description>
+ <range>&gt; 255 (8-bit output)</range>
+ <details>
+ This specifies the fully-saturated encoding level for the raw
+ sample values from the sensor. This is typically caused by the
+ sensor becoming highly non-linear or clipping. The minimum for
+ each channel is specified by the offset in the
+ android.sensor.blackLevelPattern key.
+
+ The white level is typically determined either by sensor bit depth
+ (8-14 bits is expected), or by the point where the sensor response
+ becomes too non-linear to be useful. The default value for this is
+ maximum representable value for a 16-bit raw sample (2^16 - 1).
+
+ The white level values of captured images may vary for different
+ capture settings (e.g., android.sensor.sensitivity). This key
+ represents a coarse approximation for such case. It is recommended
+ to use android.sensor.dynamicWhiteLevel for captures when supported
+ by the camera device, which provides more accurate white level values.
+ </details>
+ <hal_details>
+ The full bit depth of the sensor must be available in the raw data,
+ so the value for linear sensors should not be significantly lower
+ than maximum raw value supported, i.e. 2^(sensor bits per pixel).
+ </hal_details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="timestampSource" type="byte" visibility="public"
+ enum="true" hwlevel="legacy">
+ <enum>
+ <value>UNKNOWN
+ <notes>
+ Timestamps from android.sensor.timestamp are in nanoseconds and monotonic,
+ but can not be compared to timestamps from other subsystems
+ (e.g. accelerometer, gyro etc.), or other instances of the same or different
+ camera devices in the same system. Timestamps between streams and results for
+ a single camera instance are comparable, and the timestamps for all buffers
+ and the result metadata generated by a single capture are identical.
+ </notes>
+ </value>
+ <value>REALTIME
+ <notes>
+ Timestamps from android.sensor.timestamp are in the same timebase as
+ [elapsedRealtimeNanos](https://developer.android.com/reference/android/os/SystemClock.html#elapsedRealtimeNanos)
+ (or CLOCK_BOOTTIME), and they can be compared to other timestamps using that base.
+ </notes>
+ </value>
+ </enum>
+ <description>The time base source for sensor capture start timestamps.</description>
+ <details>
+ The timestamps provided for captures are always in nanoseconds and monotonic, but
+ may not based on a time source that can be compared to other system time sources.
+
+ This characteristic defines the source for the timestamps, and therefore whether they
+ can be compared against other system time sources/timestamps.
+ </details>
+ <tag id="V1" />
+ </entry>
+ <entry name="lensShadingApplied" type="byte" visibility="public" enum="true"
+ typedef="boolean">
+ <enum>
+ <value>FALSE</value>
+ <value>TRUE</value>
+ </enum>
+ <description>Whether the RAW images output from this camera device are subject to
+ lens shading correction.</description>
+ <details>
+ If TRUE, all images produced by the camera device in the RAW image formats will
+ have lens shading correction already applied to it. If FALSE, the images will
+ not be adjusted for lens shading correction.
+ See android.request.maxNumOutputRaw for a list of RAW image formats.
+
+ This key will be `null` for all devices do not report this information.
+ Devices with RAW capability will always report this information in this key.
+ </details>
+ </entry>
+ <entry name="preCorrectionActiveArraySize" type="int32" visibility="public"
+ type_notes="Four ints defining the active pixel rectangle" container="array"
+ typedef="rectangle" hwlevel="legacy">
+ <array>
+ <size>4</size>
+ </array>
+ <description>
+ The area of the image sensor which corresponds to active pixels prior to the
+ application of any geometric distortion correction.
+ </description>
+ <units>Pixel coordinates on the image sensor</units>
+ <details>
+ The data representation is int[4], which maps to (left, top, width, height).
+
+ This is the rectangle representing the size of the active region of the sensor (i.e.
+ the region that actually receives light from the scene) before any geometric correction
+ has been applied, and should be treated as the active region rectangle for any of the
+ raw formats. All metadata associated with raw processing (e.g. the lens shading
+ correction map, and radial distortion fields) treats the top, left of this rectangle as
+ the origin, (0,0).
+
+ The size of this region determines the maximum field of view and the maximum number of
+ pixels that an image from this sensor can contain, prior to the application of
+ geometric distortion correction. The effective maximum pixel dimensions of a
+ post-distortion-corrected image is given by the android.sensor.info.activeArraySize
+ field, and the effective maximum field of view for a post-distortion-corrected image
+ can be calculated by applying the geometric distortion correction fields to this
+ rectangle, and cropping to the rectangle given in android.sensor.info.activeArraySize.
+
+ E.g. to calculate position of a pixel, (x,y), in a processed YUV output image with the
+ dimensions in android.sensor.info.activeArraySize given the position of a pixel,
+ (x', y'), in the raw pixel array with dimensions give in
+ android.sensor.info.pixelArraySize:
+
+ 1. Choose a pixel (x', y') within the active array region of the raw buffer given in
+ android.sensor.info.preCorrectionActiveArraySize, otherwise this pixel is considered
+ to be outside of the FOV, and will not be shown in the processed output image.
+ 1. Apply geometric distortion correction to get the post-distortion pixel coordinate,
+ (x_i, y_i). When applying geometric correction metadata, note that metadata for raw
+ buffers is defined relative to the top, left of the
+ android.sensor.info.preCorrectionActiveArraySize rectangle.
+ 1. If the resulting corrected pixel coordinate is within the region given in
+ android.sensor.info.activeArraySize, then the position of this pixel in the
+ processed output image buffer is `(x_i - activeArray.left, y_i - activeArray.top)`,
+ when the top, left coordinate of that buffer is treated as (0, 0).
+
+ Thus, for pixel x',y' = (25, 25) on a sensor where android.sensor.info.pixelArraySize
+ is (100,100), android.sensor.info.preCorrectionActiveArraySize is (10, 10, 100, 100),
+ android.sensor.info.activeArraySize is (20, 20, 80, 80), and the geometric distortion
+ correction doesn't change the pixel coordinate, the resulting pixel selected in
+ pixel coordinates would be x,y = (25, 25) relative to the top,left of the raw buffer
+ with dimensions given in android.sensor.info.pixelArraySize, and would be (5, 5)
+ relative to the top,left of post-processed YUV output buffer with dimensions given in
+ android.sensor.info.activeArraySize.
+
+ The currently supported fields that correct for geometric distortion are:
+
+ 1. android.lens.radialDistortion.
+
+ If all of the geometric distortion fields are no-ops, this rectangle will be the same
+ as the post-distortion-corrected rectangle given in
+ android.sensor.info.activeArraySize.
+
+ This rectangle is defined relative to the full pixel array; (0,0) is the top-left of
+ the full pixel array, and the size of the full pixel array is given by
+ android.sensor.info.pixelArraySize.
+
+ The pre-correction active array may be smaller than the full pixel array, since the
+ full array may include black calibration pixels or other inactive regions.
+ </details>
+ <hal_details>
+ This array contains `(xmin, ymin, width, height)`. The `(xmin, ymin)` must be
+ &gt;= `(0,0)`.
+ The `(width, height)` must be &lt;= `android.sensor.info.pixelArraySize`.
+
+ If omitted by the HAL implementation, the camera framework will assume that this is
+ the same as the post-correction active array region given in
+ android.sensor.info.activeArraySize.
+ </hal_details>
+ <tag id="RAW" />
+ </entry>
+ </namespace>
+ <entry name="referenceIlluminant1" type="byte" visibility="public"
+ enum="true">
+ <enum>
+ <value id="1">DAYLIGHT</value>
+ <value id="2">FLUORESCENT</value>
+ <value id="3">TUNGSTEN
+ <notes>Incandescent light</notes>
+ </value>
+ <value id="4">FLASH</value>
+ <value id="9">FINE_WEATHER</value>
+ <value id="10">CLOUDY_WEATHER</value>
+ <value id="11">SHADE</value>
+ <value id="12">DAYLIGHT_FLUORESCENT
+ <notes>D 5700 - 7100K</notes>
+ </value>
+ <value id="13">DAY_WHITE_FLUORESCENT
+ <notes>N 4600 - 5400K</notes>
+ </value>
+ <value id="14">COOL_WHITE_FLUORESCENT
+ <notes>W 3900 - 4500K</notes>
+ </value>
+ <value id="15">WHITE_FLUORESCENT
+ <notes>WW 3200 - 3700K</notes>
+ </value>
+ <value id="17">STANDARD_A</value>
+ <value id="18">STANDARD_B</value>
+ <value id="19">STANDARD_C</value>
+ <value id="20">D55</value>
+ <value id="21">D65</value>
+ <value id="22">D75</value>
+ <value id="23">D50</value>
+ <value id="24">ISO_STUDIO_TUNGSTEN</value>
+ </enum>
+ <description>
+ The standard reference illuminant used as the scene light source when
+ calculating the android.sensor.colorTransform1,
+ android.sensor.calibrationTransform1, and
+ android.sensor.forwardMatrix1 matrices.
+ </description>
+ <details>
+ The values in this key correspond to the values defined for the
+ EXIF LightSource tag. These illuminants are standard light sources
+ that are often used calibrating camera devices.
+
+ If this key is present, then android.sensor.colorTransform1,
+ android.sensor.calibrationTransform1, and
+ android.sensor.forwardMatrix1 will also be present.
+
+ Some devices may choose to provide a second set of calibration
+ information for improved quality, including
+ android.sensor.referenceIlluminant2 and its corresponding matrices.
+ </details>
+ <hal_details>
+ The first reference illuminant (android.sensor.referenceIlluminant1)
+ and corresponding matrices must be present to support the RAW capability
+ and DNG output.
+
+ When producing raw images with a color profile that has only been
+ calibrated against a single light source, it is valid to omit
+ android.sensor.referenceIlluminant2 along with the
+ android.sensor.colorTransform2, android.sensor.calibrationTransform2,
+ and android.sensor.forwardMatrix2 matrices.
+
+ If only android.sensor.referenceIlluminant1 is included, it should be
+ chosen so that it is representative of typical scene lighting. In
+ general, D50 or DAYLIGHT will be chosen for this case.
+
+ If both android.sensor.referenceIlluminant1 and
+ android.sensor.referenceIlluminant2 are included, they should be
+ chosen to represent the typical range of scene lighting conditions.
+ In general, low color temperature illuminant such as Standard-A will
+ be chosen for the first reference illuminant and a higher color
+ temperature illuminant such as D65 will be chosen for the second
+ reference illuminant.
+ </hal_details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="referenceIlluminant2" type="byte" visibility="public">
+ <description>
+ The standard reference illuminant used as the scene light source when
+ calculating the android.sensor.colorTransform2,
+ android.sensor.calibrationTransform2, and
+ android.sensor.forwardMatrix2 matrices.
+ </description>
+ <range>Any value listed in android.sensor.referenceIlluminant1</range>
+ <details>
+ See android.sensor.referenceIlluminant1 for more details.
+
+ If this key is present, then android.sensor.colorTransform2,
+ android.sensor.calibrationTransform2, and
+ android.sensor.forwardMatrix2 will also be present.
+ </details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="calibrationTransform1" type="rational"
+ visibility="public" optional="true"
+ type_notes="3x3 matrix in row-major-order" container="array"
+ typedef="colorSpaceTransform">
+ <array>
+ <size>3</size>
+ <size>3</size>
+ </array>
+ <description>
+ A per-device calibration transform matrix that maps from the
+ reference sensor colorspace to the actual device sensor colorspace.
+ </description>
+ <details>
+ This matrix is used to correct for per-device variations in the
+ sensor colorspace, and is used for processing raw buffer data.
+
+ The matrix is expressed as a 3x3 matrix in row-major-order, and
+ contains a per-device calibration transform that maps colors
+ from reference sensor color space (i.e. the "golden module"
+ colorspace) into this camera device's native sensor color
+ space under the first reference illuminant
+ (android.sensor.referenceIlluminant1).
+ </details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="calibrationTransform2" type="rational"
+ visibility="public" optional="true"
+ type_notes="3x3 matrix in row-major-order" container="array"
+ typedef="colorSpaceTransform">
+ <array>
+ <size>3</size>
+ <size>3</size>
+ </array>
+ <description>
+ A per-device calibration transform matrix that maps from the
+ reference sensor colorspace to the actual device sensor colorspace
+ (this is the colorspace of the raw buffer data).
+ </description>
+ <details>
+ This matrix is used to correct for per-device variations in the
+ sensor colorspace, and is used for processing raw buffer data.
+
+ The matrix is expressed as a 3x3 matrix in row-major-order, and
+ contains a per-device calibration transform that maps colors
+ from reference sensor color space (i.e. the "golden module"
+ colorspace) into this camera device's native sensor color
+ space under the second reference illuminant
+ (android.sensor.referenceIlluminant2).
+
+ This matrix will only be present if the second reference
+ illuminant is present.
+ </details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="colorTransform1" type="rational"
+ visibility="public" optional="true"
+ type_notes="3x3 matrix in row-major-order" container="array"
+ typedef="colorSpaceTransform">
+ <array>
+ <size>3</size>
+ <size>3</size>
+ </array>
+ <description>
+ A matrix that transforms color values from CIE XYZ color space to
+ reference sensor color space.
+ </description>
+ <details>
+ This matrix is used to convert from the standard CIE XYZ color
+ space to the reference sensor colorspace, and is used when processing
+ raw buffer data.
+
+ The matrix is expressed as a 3x3 matrix in row-major-order, and
+ contains a color transform matrix that maps colors from the CIE
+ XYZ color space to the reference sensor color space (i.e. the
+ "golden module" colorspace) under the first reference illuminant
+ (android.sensor.referenceIlluminant1).
+
+ The white points chosen in both the reference sensor color space
+ and the CIE XYZ colorspace when calculating this transform will
+ match the standard white point for the first reference illuminant
+ (i.e. no chromatic adaptation will be applied by this transform).
+ </details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="colorTransform2" type="rational"
+ visibility="public" optional="true"
+ type_notes="3x3 matrix in row-major-order" container="array"
+ typedef="colorSpaceTransform">
+ <array>
+ <size>3</size>
+ <size>3</size>
+ </array>
+ <description>
+ A matrix that transforms color values from CIE XYZ color space to
+ reference sensor color space.
+ </description>
+ <details>
+ This matrix is used to convert from the standard CIE XYZ color
+ space to the reference sensor colorspace, and is used when processing
+ raw buffer data.
+
+ The matrix is expressed as a 3x3 matrix in row-major-order, and
+ contains a color transform matrix that maps colors from the CIE
+ XYZ color space to the reference sensor color space (i.e. the
+ "golden module" colorspace) under the second reference illuminant
+ (android.sensor.referenceIlluminant2).
+
+ The white points chosen in both the reference sensor color space
+ and the CIE XYZ colorspace when calculating this transform will
+ match the standard white point for the second reference illuminant
+ (i.e. no chromatic adaptation will be applied by this transform).
+
+ This matrix will only be present if the second reference
+ illuminant is present.
+ </details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="forwardMatrix1" type="rational"
+ visibility="public" optional="true"
+ type_notes="3x3 matrix in row-major-order" container="array"
+ typedef="colorSpaceTransform">
+ <array>
+ <size>3</size>
+ <size>3</size>
+ </array>
+ <description>
+ A matrix that transforms white balanced camera colors from the reference
+ sensor colorspace to the CIE XYZ colorspace with a D50 whitepoint.
+ </description>
+ <details>
+ This matrix is used to convert to the standard CIE XYZ colorspace, and
+ is used when processing raw buffer data.
+
+ This matrix is expressed as a 3x3 matrix in row-major-order, and contains
+ a color transform matrix that maps white balanced colors from the
+ reference sensor color space to the CIE XYZ color space with a D50 white
+ point.
+
+ Under the first reference illuminant (android.sensor.referenceIlluminant1)
+ this matrix is chosen so that the standard white point for this reference
+ illuminant in the reference sensor colorspace is mapped to D50 in the
+ CIE XYZ colorspace.
+ </details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="forwardMatrix2" type="rational"
+ visibility="public" optional="true"
+ type_notes="3x3 matrix in row-major-order" container="array"
+ typedef="colorSpaceTransform">
+ <array>
+ <size>3</size>
+ <size>3</size>
+ </array>
+ <description>
+ A matrix that transforms white balanced camera colors from the reference
+ sensor colorspace to the CIE XYZ colorspace with a D50 whitepoint.
+ </description>
+ <details>
+ This matrix is used to convert to the standard CIE XYZ colorspace, and
+ is used when processing raw buffer data.
+
+ This matrix is expressed as a 3x3 matrix in row-major-order, and contains
+ a color transform matrix that maps white balanced colors from the
+ reference sensor color space to the CIE XYZ color space with a D50 white
+ point.
+
+ Under the second reference illuminant (android.sensor.referenceIlluminant2)
+ this matrix is chosen so that the standard white point for this reference
+ illuminant in the reference sensor colorspace is mapped to D50 in the
+ CIE XYZ colorspace.
+
+ This matrix will only be present if the second reference
+ illuminant is present.
+ </details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="baseGainFactor" type="rational"
+ optional="true">
+ <description>Gain factor from electrons to raw units when
+ ISO=100</description>
+ <tag id="FUTURE" />
+ </entry>
+ <entry name="blackLevelPattern" type="int32" visibility="public"
+ optional="true" type_notes="2x2 raw count block" container="array"
+ typedef="blackLevelPattern">
+ <array>
+ <size>4</size>
+ </array>
+ <description>
+ A fixed black level offset for each of the color filter arrangement
+ (CFA) mosaic channels.
+ </description>
+ <range>&gt;= 0 for each.</range>
+ <details>
+ This key specifies the zero light value for each of the CFA mosaic
+ channels in the camera sensor. The maximal value output by the
+ sensor is represented by the value in android.sensor.info.whiteLevel.
+
+ The values are given in the same order as channels listed for the CFA
+ layout key (see android.sensor.info.colorFilterArrangement), i.e. the
+ nth value given corresponds to the black level offset for the nth
+ color channel listed in the CFA.
+
+ The black level values of captured images may vary for different
+ capture settings (e.g., android.sensor.sensitivity). This key
+ represents a coarse approximation for such case. It is recommended to
+ use android.sensor.dynamicBlackLevel or use pixels from
+ android.sensor.opticalBlackRegions directly for captures when
+ supported by the camera device, which provides more accurate black
+ level values. For raw capture in particular, it is recommended to use
+ pixels from android.sensor.opticalBlackRegions to calculate black
+ level values for each frame.
+ </details>
+ <hal_details>
+ The values are given in row-column scan order, with the first value
+ corresponding to the element of the CFA in row=0, column=0.
+ </hal_details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="maxAnalogSensitivity" type="int32" visibility="public"
+ optional="true" hwlevel="full">
+ <description>Maximum sensitivity that is implemented
+ purely through analog gain.</description>
+ <details>For android.sensor.sensitivity values less than or
+ equal to this, all applied gain must be analog. For
+ values above this, the gain applied can be a mix of analog and
+ digital.</details>
+ <tag id="V1" />
+ <tag id="FULL" />
+ </entry>
+ <entry name="orientation" type="int32" visibility="public"
+ hwlevel="legacy">
+ <description>Clockwise angle through which the output image needs to be rotated to be
+ upright on the device screen in its native orientation.
+ </description>
+ <units>Degrees of clockwise rotation; always a multiple of
+ 90</units>
+ <range>0, 90, 180, 270</range>
+ <details>
+ Also defines the direction of rolling shutter readout, which is from top to bottom in
+ the sensor's coordinate system.
+ </details>
+ <tag id="BC" />
+ </entry>
+ <entry name="profileHueSatMapDimensions" type="int32"
+ visibility="system" optional="true"
+ type_notes="Number of samples for hue, saturation, and value"
+ container="array">
+ <array>
+ <size>3</size>
+ </array>
+ <description>
+ The number of input samples for each dimension of
+ android.sensor.profileHueSatMap.
+ </description>
+ <range>
+ Hue &gt;= 1,
+ Saturation &gt;= 2,
+ Value &gt;= 1
+ </range>
+ <details>
+ The number of input samples for the hue, saturation, and value
+ dimension of android.sensor.profileHueSatMap. The order of the
+ dimensions given is hue, saturation, value; where hue is the 0th
+ element.
+ </details>
+ <tag id="RAW" />
+ </entry>
+ </static>
+ <dynamic>
+ <clone entry="android.sensor.exposureTime" kind="controls">
+ </clone>
+ <clone entry="android.sensor.frameDuration"
+ kind="controls"></clone>
+ <clone entry="android.sensor.sensitivity" kind="controls">
+ </clone>
+ <entry name="timestamp" type="int64" visibility="public"
+ hwlevel="legacy">
+ <description>Time at start of exposure of first
+ row of the image sensor active array, in nanoseconds.</description>
+ <units>Nanoseconds</units>
+ <range>&gt; 0</range>
+ <details>The timestamps are also included in all image
+ buffers produced for the same capture, and will be identical
+ on all the outputs.
+
+ When android.sensor.info.timestampSource `==` UNKNOWN,
+ the timestamps measure time since an unspecified starting point,
+ and are monotonically increasing. They can be compared with the
+ timestamps for other captures from the same camera device, but are
+ not guaranteed to be comparable to any other time source.
+
+ When android.sensor.info.timestampSource `==` REALTIME, the
+ timestamps measure time in the same timebase as
+ [elapsedRealtimeNanos](https://developer.android.com/reference/android/os/SystemClock.html#elapsedRealtimeNanos)
+ (or CLOCK_BOOTTIME), and they can
+ be compared to other timestamps from other subsystems that
+ are using that base.
+
+ For reprocessing, the timestamp will match the start of exposure of
+ the input image, i.e. {@link CaptureResult#SENSOR_TIMESTAMP the
+ timestamp} in the TotalCaptureResult that was used to create the
+ reprocess capture request.
+ </details>
+ <hal_details>
+ All timestamps must be in reference to the kernel's
+ CLOCK_BOOTTIME monotonic clock, which properly accounts for
+ time spent asleep. This allows for synchronization with
+ sensors that continue to operate while the system is
+ otherwise asleep.
+
+ If android.sensor.info.timestampSource `==` REALTIME,
+ The timestamp must be synchronized with the timestamps from other
+ sensor subsystems that are using the same timebase.
+
+ For reprocessing, the input image's start of exposure can be looked up
+ with android.sensor.timestamp from the metadata included in the
+ capture request.
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ <entry name="temperature" type="float"
+ optional="true">
+ <description>The temperature of the sensor, sampled at the time
+ exposure began for this frame.
+
+ The thermal diode being queried should be inside the sensor PCB, or
+ somewhere close to it.
+ </description>
+
+ <units>Celsius</units>
+ <range>Optional. This value is missing if no temperature is available.</range>
+ <tag id="FUTURE" />
+ </entry>
+ <entry name="neutralColorPoint" type="rational" visibility="public"
+ optional="true" container="array">
+ <array>
+ <size>3</size>
+ </array>
+ <description>
+ The estimated camera neutral color in the native sensor colorspace at
+ the time of capture.
+ </description>
+ <details>
+ This value gives the neutral color point encoded as an RGB value in the
+ native sensor color space. The neutral color point indicates the
+ currently estimated white point of the scene illumination. It can be
+ used to interpolate between the provided color transforms when
+ processing raw sensor data.
+
+ The order of the values is R, G, B; where R is in the lowest index.
+ </details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="noiseProfile" type="double" visibility="public"
+ optional="true" type_notes="Pairs of noise model coefficients"
+ container="array" typedef="pairDoubleDouble">
+ <array>
+ <size>2</size>
+ <size>CFA Channels</size>
+ </array>
+ <description>
+ Noise model coefficients for each CFA mosaic channel.
+ </description>
+ <details>
+ This key contains two noise model coefficients for each CFA channel
+ corresponding to the sensor amplification (S) and sensor readout
+ noise (O). These are given as pairs of coefficients for each channel
+ in the same order as channels listed for the CFA layout key
+ (see android.sensor.info.colorFilterArrangement). This is
+ represented as an array of Pair&lt;Double, Double&gt;, where
+ the first member of the Pair at index n is the S coefficient and the
+ second member is the O coefficient for the nth color channel in the CFA.
+
+ These coefficients are used in a two parameter noise model to describe
+ the amount of noise present in the image for each CFA channel. The
+ noise model used here is:
+
+ N(x) = sqrt(Sx + O)
+
+ Where x represents the recorded signal of a CFA channel normalized to
+ the range [0, 1], and S and O are the noise model coeffiecients for
+ that channel.
+
+ A more detailed description of the noise model can be found in the
+ Adobe DNG specification for the NoiseProfile tag.
+ </details>
+ <hal_details>
+ For a CFA layout of RGGB, the list of coefficients would be given as
+ an array of doubles S0,O0,S1,O1,..., where S0 and O0 are the coefficients
+ for the red channel, S1 and O1 are the coefficients for the first green
+ channel, etc.
+ </hal_details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="profileHueSatMap" type="float"
+ visibility="system" optional="true"
+ type_notes="Mapping for hue, saturation, and value"
+ container="array">
+ <array>
+ <size>hue_samples</size>
+ <size>saturation_samples</size>
+ <size>value_samples</size>
+ <size>3</size>
+ </array>
+ <description>
+ A mapping containing a hue shift, saturation scale, and value scale
+ for each pixel.
+ </description>
+ <units>
+ The hue shift is given in degrees; saturation and value scale factors are
+ unitless and are between 0 and 1 inclusive
+ </units>
+ <details>
+ hue_samples, saturation_samples, and value_samples are given in
+ android.sensor.profileHueSatMapDimensions.
+
+ Each entry of this map contains three floats corresponding to the
+ hue shift, saturation scale, and value scale, respectively; where the
+ hue shift has the lowest index. The map entries are stored in the key
+ in nested loop order, with the value divisions in the outer loop, the
+ hue divisions in the middle loop, and the saturation divisions in the
+ inner loop. All zero input saturation entries are required to have a
+ value scale factor of 1.0.
+ </details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="profileToneCurve" type="float"
+ visibility="system" optional="true"
+ type_notes="Samples defining a spline for a tone-mapping curve"
+ container="array">
+ <array>
+ <size>samples</size>
+ <size>2</size>
+ </array>
+ <description>
+ A list of x,y samples defining a tone-mapping curve for gamma adjustment.
+ </description>
+ <range>
+ Each sample has an input range of `[0, 1]` and an output range of
+ `[0, 1]`. The first sample is required to be `(0, 0)`, and the last
+ sample is required to be `(1, 1)`.
+ </range>
+ <details>
+ This key contains a default tone curve that can be applied while
+ processing the image as a starting point for user adjustments.
+ The curve is specified as a list of value pairs in linear gamma.
+ The curve is interpolated using a cubic spline.
+ </details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="greenSplit" type="float" visibility="public" optional="true">
+ <description>
+ The worst-case divergence between Bayer green channels.
+ </description>
+ <range>
+ &gt;= 0
+ </range>
+ <details>
+ This value is an estimate of the worst case split between the
+ Bayer green channels in the red and blue rows in the sensor color
+ filter array.
+
+ The green split is calculated as follows:
+
+ 1. A 5x5 pixel (or larger) window W within the active sensor array is
+ chosen. The term 'pixel' here is taken to mean a group of 4 Bayer
+ mosaic channels (R, Gr, Gb, B). The location and size of the window
+ chosen is implementation defined, and should be chosen to provide a
+ green split estimate that is both representative of the entire image
+ for this camera sensor, and can be calculated quickly.
+ 1. The arithmetic mean of the green channels from the red
+ rows (mean_Gr) within W is computed.
+ 1. The arithmetic mean of the green channels from the blue
+ rows (mean_Gb) within W is computed.
+ 1. The maximum ratio R of the two means is computed as follows:
+ `R = max((mean_Gr + 1)/(mean_Gb + 1), (mean_Gb + 1)/(mean_Gr + 1))`
+
+ The ratio R is the green split divergence reported for this property,
+ which represents how much the green channels differ in the mosaic
+ pattern. This value is typically used to determine the treatment of
+ the green mosaic channels when demosaicing.
+
+ The green split value can be roughly interpreted as follows:
+
+ * R &lt; 1.03 is a negligible split (&lt;3% divergence).
+ * 1.20 &lt;= R &gt;= 1.03 will require some software
+ correction to avoid demosaic errors (3-20% divergence).
+ * R &gt; 1.20 will require strong software correction to produce
+ a usuable image (&gt;20% divergence).
+ </details>
+ <hal_details>
+ The green split given may be a static value based on prior
+ characterization of the camera sensor using the green split
+ calculation method given here over a large, representative, sample
+ set of images. Other methods of calculation that produce equivalent
+ results, and can be interpreted in the same manner, may be used.
+ </hal_details>
+ <tag id="RAW" />
+ </entry>
+ </dynamic>
+ <controls>
+ <entry name="testPatternData" type="int32" visibility="public" optional="true" container="array">
+ <array>
+ <size>4</size>
+ </array>
+ <description>
+ A pixel `[R, G_even, G_odd, B]` that supplies the test pattern
+ when android.sensor.testPatternMode is SOLID_COLOR.
+ </description>
+ <details>
+ Each color channel is treated as an unsigned 32-bit integer.
+ The camera device then uses the most significant X bits
+ that correspond to how many bits are in its Bayer raw sensor
+ output.
+
+ For example, a sensor with RAW10 Bayer output would use the
+ 10 most significant bits from each color channel.
+ </details>
+ <hal_details>
+ </hal_details>
+ </entry>
+ <entry name="testPatternMode" type="int32" visibility="public" optional="true"
+ enum="true">
+ <enum>
+ <value>OFF
+ <notes>No test pattern mode is used, and the camera
+ device returns captures from the image sensor.
+
+ This is the default if the key is not set.</notes>
+ </value>
+ <value>SOLID_COLOR
+ <notes>
+ Each pixel in `[R, G_even, G_odd, B]` is replaced by its
+ respective color channel provided in
+ android.sensor.testPatternData.
+
+ For example:
+
+ android.testPatternData = [0, 0xFFFFFFFF, 0xFFFFFFFF, 0]
+
+ All green pixels are 100% green. All red/blue pixels are black.
+
+ android.testPatternData = [0xFFFFFFFF, 0, 0xFFFFFFFF, 0]
+
+ All red pixels are 100% red. Only the odd green pixels
+ are 100% green. All blue pixels are 100% black.
+ </notes>
+ </value>
+ <value>COLOR_BARS
+ <notes>
+ All pixel data is replaced with an 8-bar color pattern.
+
+ The vertical bars (left-to-right) are as follows:
+
+ * 100% white
+ * yellow
+ * cyan
+ * green
+ * magenta
+ * red
+ * blue
+ * black
+
+ In general the image would look like the following:
+
+ W Y C G M R B K
+ W Y C G M R B K
+ W Y C G M R B K
+ W Y C G M R B K
+ W Y C G M R B K
+ . . . . . . . .
+ . . . . . . . .
+ . . . . . . . .
+
+ (B = Blue, K = Black)
+
+ Each bar should take up 1/8 of the sensor pixel array width.
+ When this is not possible, the bar size should be rounded
+ down to the nearest integer and the pattern can repeat
+ on the right side.
+
+ Each bar's height must always take up the full sensor
+ pixel array height.
+
+ Each pixel in this test pattern must be set to either
+ 0% intensity or 100% intensity.
+ </notes>
+ </value>
+ <value>COLOR_BARS_FADE_TO_GRAY
+ <notes>
+ The test pattern is similar to COLOR_BARS, except that
+ each bar should start at its specified color at the top,
+ and fade to gray at the bottom.
+
+ Furthermore each bar is further subdivided into a left and
+ right half. The left half should have a smooth gradient,
+ and the right half should have a quantized gradient.
+
+ In particular, the right half's should consist of blocks of the
+ same color for 1/16th active sensor pixel array width.
+
+ The least significant bits in the quantized gradient should
+ be copied from the most significant bits of the smooth gradient.
+
+ The height of each bar should always be a multiple of 128.
+ When this is not the case, the pattern should repeat at the bottom
+ of the image.
+ </notes>
+ </value>
+ <value>PN9
+ <notes>
+ All pixel data is replaced by a pseudo-random sequence
+ generated from a PN9 512-bit sequence (typically implemented
+ in hardware with a linear feedback shift register).
+
+ The generator should be reset at the beginning of each frame,
+ and thus each subsequent raw frame with this test pattern should
+ be exactly the same as the last.
+ </notes>
+ </value>
+ <value id="256">CUSTOM1
+ <notes>The first custom test pattern. All custom patterns that are
+ available only on this camera device are at least this numeric
+ value.
+
+ All of the custom test patterns will be static
+ (that is the raw image must not vary from frame to frame).
+ </notes>
+ </value>
+ </enum>
+ <description>When enabled, the sensor sends a test pattern instead of
+ doing a real exposure from the camera.
+ </description>
+ <range>android.sensor.availableTestPatternModes</range>
+ <details>
+ When a test pattern is enabled, all manual sensor controls specified
+ by android.sensor.* will be ignored. All other controls should
+ work as normal.
+
+ For example, if manual flash is enabled, flash firing should still
+ occur (and that the test pattern remain unmodified, since the flash
+ would not actually affect it).
+
+ Defaults to OFF.
+ </details>
+ <hal_details>
+ All test patterns are specified in the Bayer domain.
+
+ The HAL may choose to substitute test patterns from the sensor
+ with test patterns from on-device memory. In that case, it should be
+ indistinguishable to the ISP whether the data came from the
+ sensor interconnect bus (such as CSI2) or memory.
+ </hal_details>
+ </entry>
+ </controls>
+ <dynamic>
+ <clone entry="android.sensor.testPatternData" kind="controls">
+ </clone>
+ <clone entry="android.sensor.testPatternMode" kind="controls">
+ </clone>
+ </dynamic>
+ <static>
+ <entry name="availableTestPatternModes" type="int32" visibility="public" optional="true"
+ type_notes="list of enums" container="array">
+ <array>
+ <size>n</size>
+ </array>
+ <description>List of sensor test pattern modes for android.sensor.testPatternMode
+ supported by this camera device.
+ </description>
+ <range>Any value listed in android.sensor.testPatternMode</range>
+ <details>
+ Defaults to OFF, and always includes OFF if defined.
+ </details>
+ <hal_details>
+ All custom modes must be >= CUSTOM1.
+ </hal_details>
+ </entry>
+ </static>
+ <dynamic>
+ <entry name="rollingShutterSkew" type="int64" visibility="public" hwlevel="limited">
+ <description>Duration between the start of first row exposure
+ and the start of last row exposure.</description>
+ <units>Nanoseconds</units>
+ <range> &gt;= 0 and &lt;
+ {@link android.hardware.camera2.params.StreamConfigurationMap#getOutputMinFrameDuration}.</range>
+ <details>
+ This is the exposure time skew between the first and last
+ row exposure start times. The first row and the last row are
+ the first and last rows inside of the
+ android.sensor.info.activeArraySize.
+
+ For typical camera sensors that use rolling shutters, this is also equivalent
+ to the frame readout time.
+ </details>
+ <hal_details>
+ The HAL must report `0` if the sensor is using global shutter, where all pixels begin
+ exposure at the same time.
+ </hal_details>
+ <tag id="V1" />
+ </entry>
+ </dynamic>
+ <static>
+ <entry name="opticalBlackRegions" type="int32" visibility="public" optional="true"
+ container="array" typedef="rectangle">
+ <array>
+ <size>4</size>
+ <size>num_regions</size>
+ </array>
+ <description>List of disjoint rectangles indicating the sensor
+ optically shielded black pixel regions.
+ </description>
+ <details>
+ In most camera sensors, the active array is surrounded by some
+ optically shielded pixel areas. By blocking light, these pixels
+ provides a reliable black reference for black level compensation
+ in active array region.
+
+ The data representation is int[4], which maps to (left, top, width, height).
+
+ This key provides a list of disjoint rectangles specifying the
+ regions of optically shielded (with metal shield) black pixel
+ regions if the camera device is capable of reading out these black
+ pixels in the output raw images. In comparison to the fixed black
+ level values reported by android.sensor.blackLevelPattern, this key
+ may provide a more accurate way for the application to calculate
+ black level of each captured raw images.
+
+ When this key is reported, the android.sensor.dynamicBlackLevel and
+ android.sensor.dynamicWhiteLevel will also be reported.
+ </details>
+ <hal_details>
+ This array contains (xmin, ymin, width, height). The (xmin, ymin)
+ must be &gt;= (0,0) and &lt;=
+ android.sensor.info.pixelArraySize. The (width, height) must be
+ &lt;= android.sensor.info.pixelArraySize. Each region must be
+ outside the region reported by
+ android.sensor.info.preCorrectionActiveArraySize.
+
+ The HAL must report minimal number of disjoint regions for the
+ optically shielded back pixel regions. For example, if a region can
+ be covered by one rectangle, the HAL must not split this region into
+ multiple rectangles.
+ </hal_details>
+ </entry>
+ </static>
+ <dynamic>
+ <entry name="dynamicBlackLevel" type="float" visibility="public"
+ optional="true" type_notes="2x2 raw count block" container="array">
+ <array>
+ <size>4</size>
+ </array>
+ <description>
+ A per-frame dynamic black level offset for each of the color filter
+ arrangement (CFA) mosaic channels.
+ </description>
+ <range>&gt;= 0 for each.</range>
+ <details>
+ Camera sensor black levels may vary dramatically for different
+ capture settings (e.g. android.sensor.sensitivity). The fixed black
+ level reported by android.sensor.blackLevelPattern may be too
+ inaccurate to represent the actual value on a per-frame basis. The
+ camera device internal pipeline relies on reliable black level values
+ to process the raw images appropriately. To get the best image
+ quality, the camera device may choose to estimate the per frame black
+ level values either based on optically shielded black regions
+ (android.sensor.opticalBlackRegions) or its internal model.
+
+ This key reports the camera device estimated per-frame zero light
+ value for each of the CFA mosaic channels in the camera sensor. The
+ android.sensor.blackLevelPattern may only represent a coarse
+ approximation of the actual black level values. This value is the
+ black level used in camera device internal image processing pipeline
+ and generally more accurate than the fixed black level values.
+ However, since they are estimated values by the camera device, they
+ may not be as accurate as the black level values calculated from the
+ optical black pixels reported by android.sensor.opticalBlackRegions.
+
+ The values are given in the same order as channels listed for the CFA
+ layout key (see android.sensor.info.colorFilterArrangement), i.e. the
+ nth value given corresponds to the black level offset for the nth
+ color channel listed in the CFA.
+
+ This key will be available if android.sensor.opticalBlackRegions is
+ available or the camera device advertises this key via
+ {@link ACAMERA_REQUEST_AVAILABLE_RESULT_KEYS}.
+ </details>
+ <hal_details>
+ The values are given in row-column scan order, with the first value
+ corresponding to the element of the CFA in row=0, column=0.
+ </hal_details>
+ <tag id="RAW" />
+ </entry>
+ <entry name="dynamicWhiteLevel" type="int32" visibility="public"
+ optional="true" >
+ <description>
+ Maximum raw value output by sensor for this frame.
+ </description>
+ <range> &gt;= 0</range>
+ <details>
+ Since the android.sensor.blackLevelPattern may change for different
+ capture settings (e.g., android.sensor.sensitivity), the white
+ level will change accordingly. This key is similar to
+ android.sensor.info.whiteLevel, but specifies the camera device
+ estimated white level for each frame.
+
+ This key will be available if android.sensor.opticalBlackRegions is
+ available or the camera device advertises this key via
+ {@link ACAMERA_REQUEST_AVAILABLE_RESULT_KEYS}.
+ </details>
+ <hal_details>
+ The full bit depth of the sensor must be available in the raw data,
+ so the value for linear sensors should not be significantly lower
+ than maximum raw value supported, i.e. 2^(sensor bits per pixel).
+ </hal_details>
+ <tag id="RAW" />
+ </entry>
+ </dynamic>
+ <static>
+ <entry name="opaqueRawSize" type="int32" visibility="system" container="array">
+ <array>
+ <size>n</size>
+ <size>3</size>
+ </array>
+ <description>Size in bytes for all the listed opaque RAW buffer sizes</description>
+ <range>Must be large enough to fit the opaque RAW of corresponding size produced by
+ the camera</range>
+ <details>
+ This configurations are listed as `(width, height, size_in_bytes)` tuples.
+ This is used for sizing the gralloc buffers for opaque RAW buffers.
+ All RAW_OPAQUE output stream configuration listed in
+ android.scaler.availableStreamConfigurations will have a corresponding tuple in
+ this key.
+ </details>
+ <hal_details>
+ This key is added in HAL3.4.
+ For HAL3.4 or above: devices advertising RAW_OPAQUE format output must list this key.
+ For HAL3.3 or earlier devices: if RAW_OPAQUE ouput is advertised, camera framework
+ will derive this key by assuming each pixel takes two bytes and no padding bytes
+ between rows.
+ </hal_details>
+ </entry>
+ </static>
+ </section>
+ <section name="shading">
+ <controls>
+ <entry name="mode" type="byte" visibility="public" enum="true" hwlevel="full">
+ <enum>
+ <value>OFF
+ <notes>No lens shading correction is applied.</notes></value>
+ <value>FAST
+ <notes>Apply lens shading corrections, without slowing
+ frame rate relative to sensor raw output</notes></value>
+ <value>HIGH_QUALITY
+ <notes>Apply high-quality lens shading correction, at the
+ cost of possibly reduced frame rate.</notes></value>
+ </enum>
+ <description>Quality of lens shading correction applied
+ to the image data.</description>
+ <range>android.shading.availableModes</range>
+ <details>
+ When set to OFF mode, no lens shading correction will be applied by the
+ camera device, and an identity lens shading map data will be provided
+ if `android.statistics.lensShadingMapMode == ON`. For example, for lens
+ shading map with size of `[ 4, 3 ]`,
+ the output android.statistics.lensShadingCorrectionMap for this case will be an identity
+ map shown below:
+
+ [ 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0,
+ 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0,
+ 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0,
+ 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0,
+ 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0,
+ 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 ]
+
+ When set to other modes, lens shading correction will be applied by the camera
+ device. Applications can request lens shading map data by setting
+ android.statistics.lensShadingMapMode to ON, and then the camera device will provide lens
+ shading map data in android.statistics.lensShadingCorrectionMap; the returned shading map
+ data will be the one applied by the camera device for this capture request.
+
+ The shading map data may depend on the auto-exposure (AE) and AWB statistics, therefore
+ the reliability of the map data may be affected by the AE and AWB algorithms. When AE and
+ AWB are in AUTO modes(android.control.aeMode `!=` OFF and android.control.awbMode `!=`
+ OFF), to get best results, it is recommended that the applications wait for the AE and AWB
+ to be converged before using the returned shading map data.
+ </details>
+ </entry>
+ <entry name="strength" type="byte">
+ <description>Control the amount of shading correction
+ applied to the images</description>
+ <units>unitless: 1-10; 10 is full shading
+ compensation</units>
+ <tag id="FUTURE" />
+ </entry>
+ </controls>
+ <dynamic>
+ <clone entry="android.shading.mode" kind="controls">
+ </clone>
+ </dynamic>
+ <static>
+ <entry name="availableModes" type="byte" visibility="public"
+ type_notes="List of enums (android.shading.mode)." container="array"
+ typedef="enumList" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of lens shading modes for android.shading.mode that are supported by this camera device.
+ </description>
+ <range>Any value listed in android.shading.mode</range>
+ <details>
+ This list contains lens shading modes that can be set for the camera device.
+ Camera devices that support the MANUAL_POST_PROCESSING capability will always
+ list OFF and FAST mode. This includes all FULL level devices.
+ LEGACY devices will always only support FAST mode.
+ </details>
+ <hal_details>
+ HAL must support both FAST and HIGH_QUALITY if lens shading correction control is
+ available on the camera device, but the underlying implementation can be the same for
+ both modes. That is, if the highest quality implementation on the camera device does not
+ slow down capture rate, then FAST and HIGH_QUALITY will generate the same output.
+ </hal_details>
+ </entry>
+ </static>
+ </section>
+ <section name="statistics">
+ <controls>
+ <entry name="faceDetectMode" type="byte" visibility="public" enum="true"
+ hwlevel="legacy">
+ <enum>
+ <value>OFF
+ <notes>Do not include face detection statistics in capture
+ results.</notes></value>
+ <value optional="true">SIMPLE
+ <notes>Return face rectangle and confidence values only.
+ </notes></value>
+ <value optional="true">FULL
+ <notes>Return all face
+ metadata.
+
+ In this mode, face rectangles, scores, landmarks, and face IDs are all valid.
+ </notes></value>
+ </enum>
+ <description>Operating mode for the face detector
+ unit.</description>
+ <range>android.statistics.info.availableFaceDetectModes</range>
+ <details>Whether face detection is enabled, and whether it
+ should output just the basic fields or the full set of
+ fields.</details>
+ <hal_details>
+ SIMPLE mode must fill in android.statistics.faceRectangles and
+ android.statistics.faceScores.
+ FULL mode must also fill in android.statistics.faceIds, and
+ android.statistics.faceLandmarks.
+ </hal_details>
+ <tag id="BC" />
+ </entry>
+ <entry name="histogramMode" type="byte" enum="true" typedef="boolean">
+ <enum>
+ <value>OFF</value>
+ <value>ON</value>
+ </enum>
+ <description>Operating mode for histogram
+ generation</description>
+ <tag id="FUTURE" />
+ </entry>
+ <entry name="sharpnessMapMode" type="byte" enum="true" typedef="boolean">
+ <enum>
+ <value>OFF</value>
+ <value>ON</value>
+ </enum>
+ <description>Operating mode for sharpness map
+ generation</description>
+ <tag id="FUTURE" />
+ </entry>
+ <entry name="hotPixelMapMode" type="byte" visibility="public" enum="true"
+ typedef="boolean">
+ <enum>
+ <value>OFF
+ <notes>Hot pixel map production is disabled.
+ </notes></value>
+ <value>ON
+ <notes>Hot pixel map production is enabled.
+ </notes></value>
+ </enum>
+ <description>
+ Operating mode for hot pixel map generation.
+ </description>
+ <range>android.statistics.info.availableHotPixelMapModes</range>
+ <details>
+ If set to `true`, a hot pixel map is returned in android.statistics.hotPixelMap.
+ If set to `false`, no hot pixel map will be returned.
+ </details>
+ <tag id="V1" />
+ <tag id="RAW" />
+ </entry>
+ </controls>
+ <static>
+ <namespace name="info">
+ <entry name="availableFaceDetectModes" type="byte"
+ visibility="public"
+ type_notes="List of enums from android.statistics.faceDetectMode"
+ container="array"
+ typedef="enumList"
+ hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>List of face detection modes for android.statistics.faceDetectMode that are
+ supported by this camera device.
+ </description>
+ <range>Any value listed in android.statistics.faceDetectMode</range>
+ <details>OFF is always supported.
+ </details>
+ </entry>
+ <entry name="histogramBucketCount" type="int32">
+ <description>Number of histogram buckets
+ supported</description>
+ <range>&gt;= 64</range>
+ <tag id="FUTURE" />
+ </entry>
+ <entry name="maxFaceCount" type="int32" visibility="public" hwlevel="legacy">
+ <description>The maximum number of simultaneously detectable
+ faces.</description>
+ <range>0 for cameras without available face detection; otherwise:
+ `>=4` for LIMITED or FULL hwlevel devices or
+ `>0` for LEGACY devices.</range>
+ <tag id="BC" />
+ </entry>
+ <entry name="maxHistogramCount" type="int32">
+ <description>Maximum value possible for a histogram
+ bucket</description>
+ <tag id="FUTURE" />
+ </entry>
+ <entry name="maxSharpnessMapValue" type="int32">
+ <description>Maximum value possible for a sharpness map
+ region.</description>
+ <tag id="FUTURE" />
+ </entry>
+ <entry name="sharpnessMapSize" type="int32"
+ type_notes="width x height" container="array" typedef="size">
+ <array>
+ <size>2</size>
+ </array>
+ <description>Dimensions of the sharpness
+ map</description>
+ <range>Must be at least 32 x 32</range>
+ <tag id="FUTURE" />
+ </entry>
+ <entry name="availableHotPixelMapModes" type="byte" visibility="public"
+ type_notes="list of enums" container="array" typedef="boolean">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of hot pixel map output modes for android.statistics.hotPixelMapMode that are
+ supported by this camera device.
+ </description>
+ <range>Any value listed in android.statistics.hotPixelMapMode</range>
+ <details>
+ If no hotpixel map output is available for this camera device, this will contain only
+ `false`.
+
+ ON is always supported on devices with the RAW capability.
+ </details>
+ <tag id="V1" />
+ <tag id="RAW" />
+ </entry>
+ <entry name="availableLensShadingMapModes" type="byte" visibility="public"
+ type_notes="list of enums" container="array" typedef="enumList">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of lens shading map output modes for android.statistics.lensShadingMapMode that
+ are supported by this camera device.
+ </description>
+ <range>Any value listed in android.statistics.lensShadingMapMode</range>
+ <details>
+ If no lens shading map output is available for this camera device, this key will
+ contain only OFF.
+
+ ON is always supported on devices with the RAW capability.
+ LEGACY mode devices will always only support OFF.
+ </details>
+ </entry>
+ </namespace>
+ </static>
+ <dynamic>
+ <clone entry="android.statistics.faceDetectMode"
+ kind="controls"></clone>
+ <entry name="faceIds" type="int32" visibility="ndk_public"
+ container="array" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>List of unique IDs for detected faces.</description>
+ <details>
+ Each detected face is given a unique ID that is valid for as long as the face is visible
+ to the camera device. A face that leaves the field of view and later returns may be
+ assigned a new ID.
+
+ Only available if android.statistics.faceDetectMode == FULL</details>
+ <tag id="BC" />
+ </entry>
+ <entry name="faceLandmarks" type="int32" visibility="ndk_public"
+ type_notes="(leftEyeX, leftEyeY, rightEyeX, rightEyeY, mouthX, mouthY)"
+ container="array" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ <size>6</size>
+ </array>
+ <description>List of landmarks for detected
+ faces.</description>
+ <details>
+ The coordinate system is that of android.sensor.info.activeArraySize, with
+ `(0, 0)` being the top-left pixel of the active array.
+
+ Only available if android.statistics.faceDetectMode == FULL</details>
+ <tag id="BC" />
+ </entry>
+ <entry name="faceRectangles" type="int32" visibility="ndk_public"
+ type_notes="(xmin, ymin, xmax, ymax). (0,0) is top-left of active pixel area"
+ container="array" typedef="rectangle" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ <size>4</size>
+ </array>
+ <description>List of the bounding rectangles for detected
+ faces.</description>
+ <details>
+ The data representation is int[4], which maps to (left, top, width, height).
+
+ The coordinate system is that of android.sensor.info.activeArraySize, with
+ `(0, 0)` being the top-left pixel of the active array.
+
+ Only available if android.statistics.faceDetectMode != OFF</details>
+ <tag id="BC" />
+ </entry>
+ <entry name="faceScores" type="byte" visibility="ndk_public"
+ container="array" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>List of the face confidence scores for
+ detected faces</description>
+ <range>1-100</range>
+ <details>Only available if android.statistics.faceDetectMode != OFF.
+ </details>
+ <hal_details>
+ The value should be meaningful (for example, setting 100 at
+ all times is illegal).</hal_details>
+ <tag id="BC" />
+ </entry>
+ <entry name="faces" type="int32" visibility="java_public" synthetic="true"
+ container="array" typedef="face" hwlevel="legacy">
+ <array>
+ <size>n</size>
+ </array>
+ <description>List of the faces detected through camera face detection
+ in this capture.</description>
+ <details>
+ Only available if android.statistics.faceDetectMode `!=` OFF.
+ </details>
+ </entry>
+ <entry name="histogram" type="int32"
+ type_notes="count of pixels for each color channel that fall into each histogram bucket, scaled to be between 0 and maxHistogramCount"
+ container="array">
+ <array>
+ <size>n</size>
+ <size>3</size>
+ </array>
+ <description>A 3-channel histogram based on the raw
+ sensor data</description>
+ <details>The k'th bucket (0-based) covers the input range
+ (with w = android.sensor.info.whiteLevel) of [ k * w/N,
+ (k + 1) * w / N ). If only a monochrome sharpness map is
+ supported, all channels should have the same data</details>
+ <tag id="FUTURE" />
+ </entry>
+ <clone entry="android.statistics.histogramMode"
+ kind="controls"></clone>
+ <entry name="sharpnessMap" type="int32"
+ type_notes="estimated sharpness for each region of the input image. Normalized to be between 0 and maxSharpnessMapValue. Higher values mean sharper (better focused)"
+ container="array">
+ <array>
+ <size>n</size>
+ <size>m</size>
+ <size>3</size>
+ </array>
+ <description>A 3-channel sharpness map, based on the raw
+ sensor data</description>
+ <details>If only a monochrome sharpness map is supported,
+ all channels should have the same data</details>
+ <tag id="FUTURE" />
+ </entry>
+ <clone entry="android.statistics.sharpnessMapMode"
+ kind="controls"></clone>
+ <entry name="lensShadingCorrectionMap" type="byte" visibility="java_public"
+ typedef="lensShadingMap" hwlevel="full">
+ <description>The shading map is a low-resolution floating-point map
+ that lists the coefficients used to correct for vignetting, for each
+ Bayer color channel.</description>
+ <range>Each gain factor is &gt;= 1</range>
+ <details>
+ The map provided here is the same map that is used by the camera device to
+ correct both color shading and vignetting for output non-RAW images.
+
+ When there is no lens shading correction applied to RAW
+ output images (android.sensor.info.lensShadingApplied `==`
+ false), this map is the complete lens shading correction
+ map; when there is some lens shading correction applied to
+ the RAW output image (android.sensor.info.lensShadingApplied
+ `==` true), this map reports the remaining lens shading
+ correction map that needs to be applied to get shading
+ corrected images that match the camera device's output for
+ non-RAW formats.
+
+ For a complete shading correction map, the least shaded
+ section of the image will have a gain factor of 1; all
+ other sections will have gains above 1.
+
+ When android.colorCorrection.mode = TRANSFORM_MATRIX, the map
+ will take into account the colorCorrection settings.
+
+ The shading map is for the entire active pixel array, and is not
+ affected by the crop region specified in the request. Each shading map
+ entry is the value of the shading compensation map over a specific
+ pixel on the sensor. Specifically, with a (N x M) resolution shading
+ map, and an active pixel array size (W x H), shading map entry
+ (x,y) ϵ (0 ... N-1, 0 ... M-1) is the value of the shading map at
+ pixel ( ((W-1)/(N-1)) * x, ((H-1)/(M-1)) * y) for the four color channels.
+ The map is assumed to be bilinearly interpolated between the sample points.
+
+ The channel order is [R, Geven, Godd, B], where Geven is the green
+ channel for the even rows of a Bayer pattern, and Godd is the odd rows.
+ The shading map is stored in a fully interleaved format.
+
+ The shading map will generally have on the order of 30-40 rows and columns,
+ and will be smaller than 64x64.
+
+ As an example, given a very small map defined as:
+
+ width,height = [ 4, 3 ]
+ values =
+ [ 1.3, 1.2, 1.15, 1.2, 1.2, 1.2, 1.15, 1.2,
+ 1.1, 1.2, 1.2, 1.2, 1.3, 1.2, 1.3, 1.3,
+ 1.2, 1.2, 1.25, 1.1, 1.1, 1.1, 1.1, 1.0,
+ 1.0, 1.0, 1.0, 1.0, 1.2, 1.3, 1.25, 1.2,
+ 1.3, 1.2, 1.2, 1.3, 1.2, 1.15, 1.1, 1.2,
+ 1.2, 1.1, 1.0, 1.2, 1.3, 1.15, 1.2, 1.3 ]
+
+ The low-resolution scaling map images for each channel are
+ (displayed using nearest-neighbor interpolation):
+
+ 
+ 
+ 
+ 
+
+ As a visualization only, inverting the full-color map to recover an
+ image of a gray wall (using bicubic interpolation for visual quality) as captured by the sensor gives:
+
+ 
+ </details>
+ </entry>
+ <entry name="lensShadingMap" type="float" visibility="ndk_public"
+ type_notes="2D array of float gain factors per channel to correct lens shading"
+ container="array" hwlevel="full">
+ <array>
+ <size>4</size>
+ <size>n</size>
+ <size>m</size>
+ </array>
+ <description>The shading map is a low-resolution floating-point map
+ that lists the coefficients used to correct for vignetting and color shading,
+ for each Bayer color channel of RAW image data.</description>
+ <range>Each gain factor is &gt;= 1</range>
+ <details>
+ The map provided here is the same map that is used by the camera device to
+ correct both color shading and vignetting for output non-RAW images.
+
+ When there is no lens shading correction applied to RAW
+ output images (android.sensor.info.lensShadingApplied `==`
+ false), this map is the complete lens shading correction
+ map; when there is some lens shading correction applied to
+ the RAW output image (android.sensor.info.lensShadingApplied
+ `==` true), this map reports the remaining lens shading
+ correction map that needs to be applied to get shading
+ corrected images that match the camera device's output for
+ non-RAW formats.
+
+ For a complete shading correction map, the least shaded
+ section of the image will have a gain factor of 1; all
+ other sections will have gains above 1.
+
+ When android.colorCorrection.mode = TRANSFORM_MATRIX, the map
+ will take into account the colorCorrection settings.
+
+ The shading map is for the entire active pixel array, and is not
+ affected by the crop region specified in the request. Each shading map
+ entry is the value of the shading compensation map over a specific
+ pixel on the sensor. Specifically, with a (N x M) resolution shading
+ map, and an active pixel array size (W x H), shading map entry
+ (x,y) ϵ (0 ... N-1, 0 ... M-1) is the value of the shading map at
+ pixel ( ((W-1)/(N-1)) * x, ((H-1)/(M-1)) * y) for the four color channels.
+ The map is assumed to be bilinearly interpolated between the sample points.
+
+ The channel order is [R, Geven, Godd, B], where Geven is the green
+ channel for the even rows of a Bayer pattern, and Godd is the odd rows.
+ The shading map is stored in a fully interleaved format, and its size
+ is provided in the camera static metadata by android.lens.info.shadingMapSize.
+
+ The shading map will generally have on the order of 30-40 rows and columns,
+ and will be smaller than 64x64.
+
+ As an example, given a very small map defined as:
+
+ android.lens.info.shadingMapSize = [ 4, 3 ]
+ android.statistics.lensShadingMap =
+ [ 1.3, 1.2, 1.15, 1.2, 1.2, 1.2, 1.15, 1.2,
+ 1.1, 1.2, 1.2, 1.2, 1.3, 1.2, 1.3, 1.3,
+ 1.2, 1.2, 1.25, 1.1, 1.1, 1.1, 1.1, 1.0,
+ 1.0, 1.0, 1.0, 1.0, 1.2, 1.3, 1.25, 1.2,
+ 1.3, 1.2, 1.2, 1.3, 1.2, 1.15, 1.1, 1.2,
+ 1.2, 1.1, 1.0, 1.2, 1.3, 1.15, 1.2, 1.3 ]
+
+ The low-resolution scaling map images for each channel are
+ (displayed using nearest-neighbor interpolation):
+
+ 
+ 
+ 
+ 
+
+ As a visualization only, inverting the full-color map to recover an
+ image of a gray wall (using bicubic interpolation for visual quality)
+ as captured by the sensor gives:
+
+ 
+
+ Note that the RAW image data might be subject to lens shading
+ correction not reported on this map. Query
+ android.sensor.info.lensShadingApplied to see if RAW image data has subject
+ to lens shading correction. If android.sensor.info.lensShadingApplied
+ is TRUE, the RAW image data is subject to partial or full lens shading
+ correction. In the case full lens shading correction is applied to RAW
+ images, the gain factor map reported in this key will contain all 1.0 gains.
+ In other words, the map reported in this key is the remaining lens shading
+ that needs to be applied on the RAW image to get images without lens shading
+ artifacts. See android.request.maxNumOutputRaw for a list of RAW image
+ formats.
+ </details>
+ <hal_details>
+ The lens shading map calculation may depend on exposure and white balance statistics.
+ When AE and AWB are in AUTO modes
+ (android.control.aeMode `!=` OFF and android.control.awbMode `!=` OFF), the HAL
+ may have all the information it need to generate most accurate lens shading map. When
+ AE or AWB are in manual mode
+ (android.control.aeMode `==` OFF or android.control.awbMode `==` OFF), the shading map
+ may be adversely impacted by manual exposure or white balance parameters. To avoid
+ generating unreliable shading map data, the HAL may choose to lock the shading map with
+ the latest known good map generated when the AE and AWB are in AUTO modes.
+ </hal_details>
+ </entry>
+ <entry name="predictedColorGains" type="float"
+ visibility="hidden"
+ deprecated="true"
+ optional="true"
+ type_notes="A 1D array of floats for 4 color channel gains"
+ container="array">
+ <array>
+ <size>4</size>
+ </array>
+ <description>The best-fit color channel gains calculated
+ by the camera device's statistics units for the current output frame.
+ </description>
+ <details>
+ This may be different than the gains used for this frame,
+ since statistics processing on data from a new frame
+ typically completes after the transform has already been
+ applied to that frame.
+
+ The 4 channel gains are defined in Bayer domain,
+ see android.colorCorrection.gains for details.
+
+ This value should always be calculated by the auto-white balance (AWB) block,
+ regardless of the android.control.* current values.
+ </details>
+ </entry>
+ <entry name="predictedColorTransform" type="rational"
+ visibility="hidden"
+ deprecated="true"
+ optional="true"
+ type_notes="3x3 rational matrix in row-major order"
+ container="array">
+ <array>
+ <size>3</size>
+ <size>3</size>
+ </array>
+ <description>The best-fit color transform matrix estimate
+ calculated by the camera device's statistics units for the current
+ output frame.</description>
+ <details>The camera device will provide the estimate from its
+ statistics unit on the white balance transforms to use
+ for the next frame. These are the values the camera device believes
+ are the best fit for the current output frame. This may
+ be different than the transform used for this frame, since
+ statistics processing on data from a new frame typically
+ completes after the transform has already been applied to
+ that frame.
+
+ These estimates must be provided for all frames, even if
+ capture settings and color transforms are set by the application.
+
+ This value should always be calculated by the auto-white balance (AWB) block,
+ regardless of the android.control.* current values.
+ </details>
+ </entry>
+ <entry name="sceneFlicker" type="byte" visibility="public" enum="true"
+ hwlevel="full">
+ <enum>
+ <value>NONE
+ <notes>The camera device does not detect any flickering illumination
+ in the current scene.</notes></value>
+ <value>50HZ
+ <notes>The camera device detects illumination flickering at 50Hz
+ in the current scene.</notes></value>
+ <value>60HZ
+ <notes>The camera device detects illumination flickering at 60Hz
+ in the current scene.</notes></value>
+ </enum>
+ <description>The camera device estimated scene illumination lighting
+ frequency.</description>
+ <details>
+ Many light sources, such as most fluorescent lights, flicker at a rate
+ that depends on the local utility power standards. This flicker must be
+ accounted for by auto-exposure routines to avoid artifacts in captured images.
+ The camera device uses this entry to tell the application what the scene
+ illuminant frequency is.
+
+ When manual exposure control is enabled
+ (`android.control.aeMode == OFF` or `android.control.mode ==
+ OFF`), the android.control.aeAntibandingMode doesn't perform
+ antibanding, and the application can ensure it selects
+ exposure times that do not cause banding issues by looking
+ into this metadata field. See
+ android.control.aeAntibandingMode for more details.
+
+ Reports NONE if there doesn't appear to be flickering illumination.
+ </details>
+ </entry>
+ <clone entry="android.statistics.hotPixelMapMode" kind="controls">
+ </clone>
+ <entry name="hotPixelMap" type="int32" visibility="public"
+ type_notes="list of coordinates based on android.sensor.pixelArraySize"
+ container="array" typedef="point">
+ <array>
+ <size>2</size>
+ <size>n</size>
+ </array>
+ <description>
+ List of `(x, y)` coordinates of hot/defective pixels on the sensor.
+ </description>
+ <range>
+ n <= number of pixels on the sensor.
+ The `(x, y)` coordinates must be bounded by
+ android.sensor.info.pixelArraySize.
+ </range>
+ <details>
+ A coordinate `(x, y)` must lie between `(0, 0)`, and
+ `(width - 1, height - 1)` (inclusive), which are the top-left and
+ bottom-right of the pixel array, respectively. The width and
+ height dimensions are given in android.sensor.info.pixelArraySize.
+ This may include hot pixels that lie outside of the active array
+ bounds given by android.sensor.info.activeArraySize.
+ </details>
+ <hal_details>
+ A hotpixel map contains the coordinates of pixels on the camera
+ sensor that do report valid values (usually due to defects in
+ the camera sensor). This includes pixels that are stuck at certain
+ values, or have a response that does not accuractly encode the
+ incoming light from the scene.
+
+ To avoid performance issues, there should be significantly fewer hot
+ pixels than actual pixels on the camera sensor.
+ </hal_details>
+ <tag id="V1" />
+ <tag id="RAW" />
+ </entry>
+ </dynamic>
+ <controls>
+ <entry name="lensShadingMapMode" type="byte" visibility="public" enum="true" hwlevel="full">
+ <enum>
+ <value>OFF
+ <notes>Do not include a lens shading map in the capture result.</notes></value>
+ <value>ON
+ <notes>Include a lens shading map in the capture result.</notes></value>
+ </enum>
+ <description>Whether the camera device will output the lens
+ shading map in output result metadata.</description>
+ <range>android.statistics.info.availableLensShadingMapModes</range>
+ <details>When set to ON,
+ android.statistics.lensShadingMap will be provided in
+ the output result metadata.
+
+ ON is always supported on devices with the RAW capability.
+ </details>
+ <tag id="RAW" />
+ </entry>
+ </controls>
+ <dynamic>
+ <clone entry="android.statistics.lensShadingMapMode" kind="controls">
+ </clone>
+ </dynamic>
+ </section>
+ <section name="tonemap">
+ <controls>
+ <entry name="curveBlue" type="float" visibility="ndk_public"
+ type_notes="1D array of float pairs (P_IN, P_OUT). The maximum number of pairs is specified by android.tonemap.maxCurvePoints."
+ container="array" hwlevel="full">
+ <array>
+ <size>n</size>
+ <size>2</size>
+ </array>
+ <description>Tonemapping / contrast / gamma curve for the blue
+ channel, to use when android.tonemap.mode is
+ CONTRAST_CURVE.</description>
+ <details>See android.tonemap.curveRed for more details.</details>
+ </entry>
+ <entry name="curveGreen" type="float" visibility="ndk_public"
+ type_notes="1D array of float pairs (P_IN, P_OUT). The maximum number of pairs is specified by android.tonemap.maxCurvePoints."
+ container="array" hwlevel="full">
+ <array>
+ <size>n</size>
+ <size>2</size>
+ </array>
+ <description>Tonemapping / contrast / gamma curve for the green
+ channel, to use when android.tonemap.mode is
+ CONTRAST_CURVE.</description>
+ <details>See android.tonemap.curveRed for more details.</details>
+ </entry>
+ <entry name="curveRed" type="float" visibility="ndk_public"
+ type_notes="1D array of float pairs (P_IN, P_OUT). The maximum number of pairs is specified by android.tonemap.maxCurvePoints."
+ container="array" hwlevel="full">
+ <array>
+ <size>n</size>
+ <size>2</size>
+ </array>
+ <description>Tonemapping / contrast / gamma curve for the red
+ channel, to use when android.tonemap.mode is
+ CONTRAST_CURVE.</description>
+ <range>0-1 on both input and output coordinates, normalized
+ as a floating-point value such that 0 == black and 1 == white.
+ </range>
+ <details>
+ Each channel's curve is defined by an array of control points:
+
+ android.tonemap.curveRed =
+ [ P0in, P0out, P1in, P1out, P2in, P2out, P3in, P3out, ..., PNin, PNout ]
+ 2 <= N <= android.tonemap.maxCurvePoints
+
+ These are sorted in order of increasing `Pin`; it is
+ required that input values 0.0 and 1.0 are included in the list to
+ define a complete mapping. For input values between control points,
+ the camera device must linearly interpolate between the control
+ points.
+
+ Each curve can have an independent number of points, and the number
+ of points can be less than max (that is, the request doesn't have to
+ always provide a curve with number of points equivalent to
+ android.tonemap.maxCurvePoints).
+
+ A few examples, and their corresponding graphical mappings; these
+ only specify the red channel and the precision is limited to 4
+ digits, for conciseness.
+
+ Linear mapping:
+
+ android.tonemap.curveRed = [ 0, 0, 1.0, 1.0 ]
+
+ 
+
+ Invert mapping:
+
+ android.tonemap.curveRed = [ 0, 1.0, 1.0, 0 ]
+
+ 
+
+ Gamma 1/2.2 mapping, with 16 control points:
+
+ android.tonemap.curveRed = [
+ 0.0000, 0.0000, 0.0667, 0.2920, 0.1333, 0.4002, 0.2000, 0.4812,
+ 0.2667, 0.5484, 0.3333, 0.6069, 0.4000, 0.6594, 0.4667, 0.7072,
+ 0.5333, 0.7515, 0.6000, 0.7928, 0.6667, 0.8317, 0.7333, 0.8685,
+ 0.8000, 0.9035, 0.8667, 0.9370, 0.9333, 0.9691, 1.0000, 1.0000 ]
+
+ 
+
+ Standard sRGB gamma mapping, per IEC 61966-2-1:1999, with 16 control points:
+
+ android.tonemap.curveRed = [
+ 0.0000, 0.0000, 0.0667, 0.2864, 0.1333, 0.4007, 0.2000, 0.4845,
+ 0.2667, 0.5532, 0.3333, 0.6125, 0.4000, 0.6652, 0.4667, 0.7130,
+ 0.5333, 0.7569, 0.6000, 0.7977, 0.6667, 0.8360, 0.7333, 0.8721,
+ 0.8000, 0.9063, 0.8667, 0.9389, 0.9333, 0.9701, 1.0000, 1.0000 ]
+
+ 
+ </details>
+ <hal_details>
+ For good quality of mapping, at least 128 control points are
+ preferred.
+
+ A typical use case of this would be a gamma-1/2.2 curve, with as many
+ control points used as are available.
+ </hal_details>
+ </entry>
+ <entry name="curve" type="float" visibility="java_public" synthetic="true"
+ typedef="tonemapCurve"
+ hwlevel="full">
+ <description>Tonemapping / contrast / gamma curve to use when android.tonemap.mode
+ is CONTRAST_CURVE.</description>
+ <details>
+ The tonemapCurve consist of three curves for each of red, green, and blue
+ channels respectively. The following example uses the red channel as an
+ example. The same logic applies to green and blue channel.
+ Each channel's curve is defined by an array of control points:
+
+ curveRed =
+ [ P0(in, out), P1(in, out), P2(in, out), P3(in, out), ..., PN(in, out) ]
+ 2 <= N <= android.tonemap.maxCurvePoints
+
+ These are sorted in order of increasing `Pin`; it is always
+ guaranteed that input values 0.0 and 1.0 are included in the list to
+ define a complete mapping. For input values between control points,
+ the camera device must linearly interpolate between the control
+ points.
+
+ Each curve can have an independent number of points, and the number
+ of points can be less than max (that is, the request doesn't have to
+ always provide a curve with number of points equivalent to
+ android.tonemap.maxCurvePoints).
+
+ A few examples, and their corresponding graphical mappings; these
+ only specify the red channel and the precision is limited to 4
+ digits, for conciseness.
+
+ Linear mapping:
+
+ curveRed = [ (0, 0), (1.0, 1.0) ]
+
+ 
+
+ Invert mapping:
+
+ curveRed = [ (0, 1.0), (1.0, 0) ]
+
+ 
+
+ Gamma 1/2.2 mapping, with 16 control points:
+
+ curveRed = [
+ (0.0000, 0.0000), (0.0667, 0.2920), (0.1333, 0.4002), (0.2000, 0.4812),
+ (0.2667, 0.5484), (0.3333, 0.6069), (0.4000, 0.6594), (0.4667, 0.7072),
+ (0.5333, 0.7515), (0.6000, 0.7928), (0.6667, 0.8317), (0.7333, 0.8685),
+ (0.8000, 0.9035), (0.8667, 0.9370), (0.9333, 0.9691), (1.0000, 1.0000) ]
+
+ 
+
+ Standard sRGB gamma mapping, per IEC 61966-2-1:1999, with 16 control points:
+
+ curveRed = [
+ (0.0000, 0.0000), (0.0667, 0.2864), (0.1333, 0.4007), (0.2000, 0.4845),
+ (0.2667, 0.5532), (0.3333, 0.6125), (0.4000, 0.6652), (0.4667, 0.7130),
+ (0.5333, 0.7569), (0.6000, 0.7977), (0.6667, 0.8360), (0.7333, 0.8721),
+ (0.8000, 0.9063), (0.8667, 0.9389), (0.9333, 0.9701), (1.0000, 1.0000) ]
+
+ 
+ </details>
+ <hal_details>
+ This entry is created by the framework from the curveRed, curveGreen and
+ curveBlue entries.
+ </hal_details>
+ </entry>
+ <entry name="mode" type="byte" visibility="public" enum="true"
+ hwlevel="full">
+ <enum>
+ <value>CONTRAST_CURVE
+ <notes>Use the tone mapping curve specified in
+ the android.tonemap.curve* entries.
+
+ All color enhancement and tonemapping must be disabled, except
+ for applying the tonemapping curve specified by
+ android.tonemap.curve.
+
+ Must not slow down frame rate relative to raw
+ sensor output.
+ </notes>
+ </value>
+ <value>FAST
+ <notes>
+ Advanced gamma mapping and color enhancement may be applied, without
+ reducing frame rate compared to raw sensor output.
+ </notes>
+ </value>
+ <value>HIGH_QUALITY
+ <notes>
+ High-quality gamma mapping and color enhancement will be applied, at
+ the cost of possibly reduced frame rate compared to raw sensor output.
+ </notes>
+ </value>
+ <value>GAMMA_VALUE
+ <notes>
+ Use the gamma value specified in android.tonemap.gamma to peform
+ tonemapping.
+
+ All color enhancement and tonemapping must be disabled, except
+ for applying the tonemapping curve specified by android.tonemap.gamma.
+
+ Must not slow down frame rate relative to raw sensor output.
+ </notes>
+ </value>
+ <value>PRESET_CURVE
+ <notes>
+ Use the preset tonemapping curve specified in
+ android.tonemap.presetCurve to peform tonemapping.
+
+ All color enhancement and tonemapping must be disabled, except
+ for applying the tonemapping curve specified by
+ android.tonemap.presetCurve.
+
+ Must not slow down frame rate relative to raw sensor output.
+ </notes>
+ </value>
+ </enum>
+ <description>High-level global contrast/gamma/tonemapping control.
+ </description>
+ <range>android.tonemap.availableToneMapModes</range>
+ <details>
+ When switching to an application-defined contrast curve by setting
+ android.tonemap.mode to CONTRAST_CURVE, the curve is defined
+ per-channel with a set of `(in, out)` points that specify the
+ mapping from input high-bit-depth pixel value to the output
+ low-bit-depth value. Since the actual pixel ranges of both input
+ and output may change depending on the camera pipeline, the values
+ are specified by normalized floating-point numbers.
+
+ More-complex color mapping operations such as 3D color look-up
+ tables, selective chroma enhancement, or other non-linear color
+ transforms will be disabled when android.tonemap.mode is
+ CONTRAST_CURVE.
+
+ When using either FAST or HIGH_QUALITY, the camera device will
+ emit its own tonemap curve in android.tonemap.curve.
+ These values are always available, and as close as possible to the
+ actually used nonlinear/nonglobal transforms.
+
+ If a request is sent with CONTRAST_CURVE with the camera device's
+ provided curve in FAST or HIGH_QUALITY, the image's tonemap will be
+ roughly the same.</details>
+ </entry>
+ </controls>
+ <static>
+ <entry name="maxCurvePoints" type="int32" visibility="public"
+ hwlevel="full">
+ <description>Maximum number of supported points in the
+ tonemap curve that can be used for android.tonemap.curve.
+ </description>
+ <details>
+ If the actual number of points provided by the application (in android.tonemap.curve*) is
+ less than this maximum, the camera device will resample the curve to its internal
+ representation, using linear interpolation.
+
+ The output curves in the result metadata may have a different number
+ of points than the input curves, and will represent the actual
+ hardware curves used as closely as possible when linearly interpolated.
+ </details>
+ <hal_details>
+ This value must be at least 64. This should be at least 128.
+ </hal_details>
+ </entry>
+ <entry name="availableToneMapModes" type="byte" visibility="public"
+ type_notes="list of enums" container="array" typedef="enumList" hwlevel="full">
+ <array>
+ <size>n</size>
+ </array>
+ <description>
+ List of tonemapping modes for android.tonemap.mode that are supported by this camera
+ device.
+ </description>
+ <range>Any value listed in android.tonemap.mode</range>
+ <details>
+ Camera devices that support the MANUAL_POST_PROCESSING capability will always contain
+ at least one of below mode combinations:
+
+ * CONTRAST_CURVE, FAST and HIGH_QUALITY
+ * GAMMA_VALUE, PRESET_CURVE, FAST and HIGH_QUALITY
+
+ This includes all FULL level devices.
+ </details>
+ <hal_details>
+ HAL must support both FAST and HIGH_QUALITY if automatic tonemap control is available
+ on the camera device, but the underlying implementation can be the same for both modes.
+ That is, if the highest quality implementation on the camera device does not slow down
+ capture rate, then FAST and HIGH_QUALITY will generate the same output.
+ </hal_details>
+ </entry>
+ </static>
+ <dynamic>
+ <clone entry="android.tonemap.curveBlue" kind="controls">
+ </clone>
+ <clone entry="android.tonemap.curveGreen" kind="controls">
+ </clone>
+ <clone entry="android.tonemap.curveRed" kind="controls">
+ </clone>
+ <clone entry="android.tonemap.curve" kind="controls">
+ </clone>
+ <clone entry="android.tonemap.mode" kind="controls">
+ </clone>
+ </dynamic>
+ <controls>
+ <entry name="gamma" type="float" visibility="public">
+ <description> Tonemapping curve to use when android.tonemap.mode is
+ GAMMA_VALUE
+ </description>
+ <details>
+ The tonemap curve will be defined the following formula:
+ * OUT = pow(IN, 1.0 / gamma)
+ where IN and OUT is the input pixel value scaled to range [0.0, 1.0],
+ pow is the power function and gamma is the gamma value specified by this
+ key.
+
+ The same curve will be applied to all color channels. The camera device
+ may clip the input gamma value to its supported range. The actual applied
+ value will be returned in capture result.
+
+ The valid range of gamma value varies on different devices, but values
+ within [1.0, 5.0] are guaranteed not to be clipped.
+ </details>
+ </entry>
+ <entry name="presetCurve" type="byte" visibility="public" enum="true">
+ <enum>
+ <value>SRGB
+ <notes>Tonemapping curve is defined by sRGB</notes>
+ </value>
+ <value>REC709
+ <notes>Tonemapping curve is defined by ITU-R BT.709</notes>
+ </value>
+ </enum>
+ <description> Tonemapping curve to use when android.tonemap.mode is
+ PRESET_CURVE
+ </description>
+ <details>
+ The tonemap curve will be defined by specified standard.
+
+ sRGB (approximated by 16 control points):
+
+ 
+
+ Rec. 709 (approximated by 16 control points):
+
+ 
+
+ Note that above figures show a 16 control points approximation of preset
+ curves. Camera devices may apply a different approximation to the curve.
+ </details>
+ </entry>
+ </controls>
+ <dynamic>
+ <clone entry="android.tonemap.gamma" kind="controls">
+ </clone>
+ <clone entry="android.tonemap.presetCurve" kind="controls">
+ </clone>
+ </dynamic>
+ </section>
+ <section name="led">
+ <controls>
+ <entry name="transmit" type="byte" visibility="hidden" optional="true"
+ enum="true" typedef="boolean">
+ <enum>
+ <value>OFF</value>
+ <value>ON</value>
+ </enum>
+ <description>This LED is nominally used to indicate to the user
+ that the camera is powered on and may be streaming images back to the
+ Application Processor. In certain rare circumstances, the OS may
+ disable this when video is processed locally and not transmitted to
+ any untrusted applications.
+
+ In particular, the LED *must* always be on when the data could be
+ transmitted off the device. The LED *should* always be on whenever
+ data is stored locally on the device.
+
+ The LED *may* be off if a trusted application is using the data that
+ doesn't violate the above rules.
+ </description>
+ </entry>
+ </controls>
+ <dynamic>
+ <clone entry="android.led.transmit" kind="controls"></clone>
+ </dynamic>
+ <static>
+ <entry name="availableLeds" type="byte" visibility="hidden" optional="true"
+ enum="true"
+ container="array">
+ <array>
+ <size>n</size>
+ </array>
+ <enum>
+ <value>TRANSMIT
+ <notes>android.led.transmit control is used.</notes>
+ </value>
+ </enum>
+ <description>A list of camera LEDs that are available on this system.
+ </description>
+ </entry>
+ </static>
+ </section>
+ <section name="info">
+ <static>
+ <entry name="supportedHardwareLevel" type="byte" visibility="public"
+ enum="true" hwlevel="legacy">
+ <enum>
+ <value>
+ LIMITED
+ <notes>
+ This camera device does not have enough capabilities to qualify as a `FULL` device or
+ better.
+
+ Only the stream configurations listed in the `LEGACY` and `LIMITED` tables in the
+ {@link ACameraDevice_createCaptureSession} documentation are guaranteed to be supported.
+
+ All `LIMITED` devices support the `BACKWARDS_COMPATIBLE` capability, indicating basic
+ support for color image capture. The only exception is that the device may
+ alternatively support only the `DEPTH_OUTPUT` capability, if it can only output depth
+ measurements and not color images.
+
+ `LIMITED` devices and above require the use of android.control.aePrecaptureTrigger
+ to lock exposure metering (and calculate flash power, for cameras with flash) before
+ capturing a high-quality still image.
+
+ A `LIMITED` device that only lists the `BACKWARDS_COMPATIBLE` capability is only
+ required to support full-automatic operation and post-processing (`OFF` is not
+ supported for android.control.aeMode, android.control.afMode, or
+ android.control.awbMode)
+
+ Additional capabilities may optionally be supported by a `LIMITED`-level device, and
+ can be checked for in android.request.availableCapabilities.
+ </notes>
+ </value>
+ <value>
+ FULL
+ <notes>
+ This camera device is capable of supporting advanced imaging applications.
+
+ The stream configurations listed in the `FULL`, `LEGACY` and `LIMITED` tables in the
+ {@link ACameraDevice_createCaptureSession} documentation are guaranteed to be supported.
+
+ A `FULL` device will support below capabilities:
+
+ * `BURST_CAPTURE` capability (android.request.availableCapabilities contains
+ `BURST_CAPTURE`)
+ * Per frame control (android.sync.maxLatency `==` PER_FRAME_CONTROL)
+ * Manual sensor control (android.request.availableCapabilities contains `MANUAL_SENSOR`)
+ * Manual post-processing control (android.request.availableCapabilities contains
+ `MANUAL_POST_PROCESSING`)
+ * The required exposure time range defined in android.sensor.info.exposureTimeRange
+ * The required maxFrameDuration defined in android.sensor.info.maxFrameDuration
+
+ Note:
+ Pre-API level 23, FULL devices also supported arbitrary cropping region
+ (android.scaler.croppingType `== FREEFORM`); this requirement was relaxed in API level
+ 23, and `FULL` devices may only support `CENTERED` cropping.
+ </notes>
+ </value>
+ <value>
+ LEGACY
+ <notes>
+ This camera device is running in backward compatibility mode.
+
+ Only the stream configurations listed in the `LEGACY` table in the {@link
+ ACameraDevice_createCaptureSession} documentation are supported.
+
+ A `LEGACY` device does not support per-frame control, manual sensor control, manual
+ post-processing, arbitrary cropping regions, and has relaxed performance constraints.
+ No additional capabilities beyond `BACKWARD_COMPATIBLE` will ever be listed by a
+ `LEGACY` device in android.request.availableCapabilities.
+
+ In addition, the android.control.aePrecaptureTrigger is not functional on `LEGACY`
+ devices. Instead, every request that includes a JPEG-format output target is treated
+ as triggering a still capture, internally executing a precapture trigger. This may
+ fire the flash for flash power metering during precapture, and then fire the flash
+ for the final capture, if a flash is available on the device and the AE mode is set to
+ enable the flash.
+ </notes>
+ </value>
+ <value>
+ 3
+ <notes>
+ This camera device is capable of YUV reprocessing and RAW data capture, in addition to
+ FULL-level capabilities.
+
+ The stream configurations listed in the `LEVEL_3`, `RAW`, `FULL`, `LEGACY` and
+ `LIMITED` tables in the {@link
+ ACameraDevice_createCaptureSession}
+ documentation are guaranteed to be supported.
+
+ The following additional capabilities are guaranteed to be supported:
+
+ * `YUV_REPROCESSING` capability (android.request.availableCapabilities contains
+ `YUV_REPROCESSING`)
+ * `RAW` capability (android.request.availableCapabilities contains
+ `RAW`)
+ </notes>
+ </value>
+ </enum>
+ <description>
+ Generally classifies the overall set of the camera device functionality.
+ </description>
+ <details>
+ The supported hardware level is a high-level description of the camera device's
+ capabilities, summarizing several capabilities into one field. Each level adds additional
+ features to the previous one, and is always a strict superset of the previous level.
+ The ordering is `LEGACY < LIMITED < FULL < LEVEL_3`.
+
+ Starting from `LEVEL_3`, the level enumerations are guaranteed to be in increasing
+ numerical value as well. To check if a given device is at least at a given hardware level,
+ the following code snippet can be used:
+
+ // Returns true if the device supports the required hardware level, or better.
+ boolean isHardwareLevelSupported(CameraCharacteristics c, int requiredLevel) {
+ int deviceLevel = c.get(CameraCharacteristics.INFO_SUPPORTED_HARDWARE_LEVEL);
+ if (deviceLevel == CameraCharacteristics.INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY) {
+ return requiredLevel == deviceLevel;
+ }
+ // deviceLevel is not LEGACY, can use numerical sort
+ return requiredLevel <= deviceLevel;
+ }
+
+ At a high level, the levels are:
+
+ * `LEGACY` devices operate in a backwards-compatibility mode for older
+ Android devices, and have very limited capabilities.
+ * `LIMITED` devices represent the
+ baseline feature set, and may also include additional capabilities that are
+ subsets of `FULL`.
+ * `FULL` devices additionally support per-frame manual control of sensor, flash, lens and
+ post-processing settings, and image capture at a high rate.
+ * `LEVEL_3` devices additionally support YUV reprocessing and RAW image capture, along
+ with additional output stream configurations.
+
+ See the individual level enums for full descriptions of the supported capabilities. The
+ android.request.availableCapabilities entry describes the device's capabilities at a
+ finer-grain level, if needed. In addition, many controls have their available settings or
+ ranges defined in individual metadata tag entries in this document.
+
+ Some features are not part of any particular hardware level or capability and must be
+ queried separately. These include:
+
+ * Calibrated timestamps (android.sensor.info.timestampSource `==` REALTIME)
+ * Precision lens control (android.lens.info.focusDistanceCalibration `==` CALIBRATED)
+ * Face detection (android.statistics.info.availableFaceDetectModes)
+ * Optical or electrical image stabilization
+ (android.lens.info.availableOpticalStabilization,
+ android.control.availableVideoStabilizationModes)
+
+ </details>
+ <hal_details>
+ The camera 3 HAL device can implement one of three possible operational modes; LIMITED,
+ FULL, and LEVEL_3.
+
+ FULL support or better is expected from new higher-end devices. Limited
+ mode has hardware requirements roughly in line with those for a camera HAL device v1
+ implementation, and is expected from older or inexpensive devices. Each level is a strict
+ superset of the previous level, and they share the same essential operational flow.
+
+ For full details refer to "S3. Operational Modes" in camera3.h
+
+ Camera HAL3+ must not implement LEGACY mode. It is there for backwards compatibility in
+ the `android.hardware.camera2` user-facing API only on HALv1 devices, and is implemented
+ by the camera framework code.
+ </hal_details>
+ </entry>
+ </static>
+ </section>
+ <section name="blackLevel">
+ <controls>
+ <entry name="lock" type="byte" visibility="public" enum="true"
+ typedef="boolean" hwlevel="full">
+ <enum>
+ <value>OFF</value>
+ <value>ON</value>
+ </enum>
+ <description> Whether black-level compensation is locked
+ to its current values, or is free to vary.</description>
+ <details>When set to `true` (ON), the values used for black-level
+ compensation will not change until the lock is set to
+ `false` (OFF).
+
+ Since changes to certain capture parameters (such as
+ exposure time) may require resetting of black level
+ compensation, the camera device must report whether setting
+ the black level lock was successful in the output result
+ metadata.
+
+ For example, if a sequence of requests is as follows:
+
+ * Request 1: Exposure = 10ms, Black level lock = OFF
+ * Request 2: Exposure = 10ms, Black level lock = ON
+ * Request 3: Exposure = 10ms, Black level lock = ON
+ * Request 4: Exposure = 20ms, Black level lock = ON
+ * Request 5: Exposure = 20ms, Black level lock = ON
+ * Request 6: Exposure = 20ms, Black level lock = ON
+
+ And the exposure change in Request 4 requires the camera
+ device to reset the black level offsets, then the output
+ result metadata is expected to be:
+
+ * Result 1: Exposure = 10ms, Black level lock = OFF
+ * Result 2: Exposure = 10ms, Black level lock = ON
+ * Result 3: Exposure = 10ms, Black level lock = ON
+ * Result 4: Exposure = 20ms, Black level lock = OFF
+ * Result 5: Exposure = 20ms, Black level lock = ON
+ * Result 6: Exposure = 20ms, Black level lock = ON
+
+ This indicates to the application that on frame 4, black
+ levels were reset due to exposure value changes, and pixel
+ values may not be consistent across captures.
+
+ The camera device will maintain the lock to the extent
+ possible, only overriding the lock to OFF when changes to
+ other request parameters require a black level recalculation
+ or reset.
+ </details>
+ <hal_details>
+ If for some reason black level locking is no longer possible
+ (for example, the analog gain has changed, which forces
+ black level offsets to be recalculated), then the HAL must
+ override this request (and it must report 'OFF' when this
+ does happen) until the next capture for which locking is
+ possible again.</hal_details>
+ <tag id="HAL2" />
+ </entry>
+ </controls>
+ <dynamic>
+ <clone entry="android.blackLevel.lock"
+ kind="controls">
+ <details>
+ Whether the black level offset was locked for this frame. Should be
+ ON if android.blackLevel.lock was ON in the capture request, unless
+ a change in other capture settings forced the camera device to
+ perform a black level reset.
+ </details>
+ </clone>
+ </dynamic>
+ </section>
+ <section name="sync">
+ <dynamic>
+ <entry name="frameNumber" type="int64" visibility="ndk_public"
+ enum="true" hwlevel="legacy">
+ <enum>
+ <value id="-1">CONVERGING
+ <notes>
+ The current result is not yet fully synchronized to any request.
+
+ Synchronization is in progress, and reading metadata from this
+ result may include a mix of data that have taken effect since the
+ last synchronization time.
+
+ In some future result, within android.sync.maxLatency frames,
+ this value will update to the actual frame number frame number
+ the result is guaranteed to be synchronized to (as long as the
+ request settings remain constant).
+ </notes>
+ </value>
+ <value id="-2">UNKNOWN
+ <notes>
+ The current result's synchronization status is unknown.
+
+ The result may have already converged, or it may be in
+ progress. Reading from this result may include some mix
+ of settings from past requests.
+
+ After a settings change, the new settings will eventually all
+ take effect for the output buffers and results. However, this
+ value will not change when that happens. Altering settings
+ rapidly may provide outcomes using mixes of settings from recent
+ requests.
+
+ This value is intended primarily for backwards compatibility with
+ the older camera implementations (for android.hardware.Camera).
+ </notes>
+ </value>
+ </enum>
+ <description>The frame number corresponding to the last request
+ with which the output result (metadata + buffers) has been fully
+ synchronized.</description>
+ <range>Either a non-negative value corresponding to a
+ `frame_number`, or one of the two enums (CONVERGING / UNKNOWN).
+ </range>
+ <details>
+ When a request is submitted to the camera device, there is usually a
+ delay of several frames before the controls get applied. A camera
+ device may either choose to account for this delay by implementing a
+ pipeline and carefully submit well-timed atomic control updates, or
+ it may start streaming control changes that span over several frame
+ boundaries.
+
+ In the latter case, whenever a request's settings change relative to
+ the previous submitted request, the full set of changes may take
+ multiple frame durations to fully take effect. Some settings may
+ take effect sooner (in less frame durations) than others.
+
+ While a set of control changes are being propagated, this value
+ will be CONVERGING.
+
+ Once it is fully known that a set of control changes have been
+ finished propagating, and the resulting updated control settings
+ have been read back by the camera device, this value will be set
+ to a non-negative frame number (corresponding to the request to
+ which the results have synchronized to).
+
+ Older camera device implementations may not have a way to detect
+ when all camera controls have been applied, and will always set this
+ value to UNKNOWN.
+
+ FULL capability devices will always have this value set to the
+ frame number of the request corresponding to this result.
+
+ _Further details_:
+
+ * Whenever a request differs from the last request, any future
+ results not yet returned may have this value set to CONVERGING (this
+ could include any in-progress captures not yet returned by the camera
+ device, for more details see pipeline considerations below).
+ * Submitting a series of multiple requests that differ from the
+ previous request (e.g. r1, r2, r3 s.t. r1 != r2 != r3)
+ moves the new synchronization frame to the last non-repeating
+ request (using the smallest frame number from the contiguous list of
+ repeating requests).
+ * Submitting the same request repeatedly will not change this value
+ to CONVERGING, if it was already a non-negative value.
+ * When this value changes to non-negative, that means that all of the
+ metadata controls from the request have been applied, all of the
+ metadata controls from the camera device have been read to the
+ updated values (into the result), and all of the graphics buffers
+ corresponding to this result are also synchronized to the request.
+
+ _Pipeline considerations_:
+
+ Submitting a request with updated controls relative to the previously
+ submitted requests may also invalidate the synchronization state
+ of all the results corresponding to currently in-flight requests.
+
+ In other words, results for this current request and up to
+ android.request.pipelineMaxDepth prior requests may have their
+ android.sync.frameNumber change to CONVERGING.
+ </details>
+ <hal_details>
+ Using UNKNOWN here is illegal unless android.sync.maxLatency
+ is also UNKNOWN.
+
+ FULL capability devices should simply set this value to the
+ `frame_number` of the request this result corresponds to.
+ </hal_details>
+ <tag id="V1" />
+ </entry>
+ </dynamic>
+ <static>
+ <entry name="maxLatency" type="int32" visibility="public" enum="true"
+ hwlevel="legacy">
+ <enum>
+ <value id="0">PER_FRAME_CONTROL
+ <notes>
+ Every frame has the requests immediately applied.
+
+ Changing controls over multiple requests one after another will
+ produce results that have those controls applied atomically
+ each frame.
+
+ All FULL capability devices will have this as their maxLatency.
+ </notes>
+ </value>
+ <value id="-1">UNKNOWN
+ <notes>
+ Each new frame has some subset (potentially the entire set)
+ of the past requests applied to the camera settings.
+
+ By submitting a series of identical requests, the camera device
+ will eventually have the camera settings applied, but it is
+ unknown when that exact point will be.
+
+ All LEGACY capability devices will have this as their maxLatency.
+ </notes>
+ </value>
+ </enum>
+ <description>
+ The maximum number of frames that can occur after a request
+ (different than the previous) has been submitted, and before the
+ result's state becomes synchronized.
+ </description>
+ <units>Frame counts</units>
+ <range>A positive value, PER_FRAME_CONTROL, or UNKNOWN.</range>
+ <details>
+ This defines the maximum distance (in number of metadata results),
+ between the frame number of the request that has new controls to apply
+ and the frame number of the result that has all the controls applied.
+
+ In other words this acts as an upper boundary for how many frames
+ must occur before the camera device knows for a fact that the new
+ submitted camera settings have been applied in outgoing frames.
+ </details>
+ <hal_details>
+ For example if maxLatency was 2,
+
+ initial request = X (repeating)
+ request1 = X
+ request2 = Y
+ request3 = Y
+ request4 = Y
+
+ where requestN has frameNumber N, and the first of the repeating
+ initial request's has frameNumber F (and F < 1).
+
+ initial result = X' + { android.sync.frameNumber == F }
+ result1 = X' + { android.sync.frameNumber == F }
+ result2 = X' + { android.sync.frameNumber == CONVERGING }
+ result3 = X' + { android.sync.frameNumber == CONVERGING }
+ result4 = X' + { android.sync.frameNumber == 2 }
+
+ where resultN has frameNumber N.
+
+ Since `result4` has a `frameNumber == 4` and
+ `android.sync.frameNumber == 2`, the distance is clearly
+ `4 - 2 = 2`.
+
+ Use `frame_count` from camera3_request_t instead of
+ android.request.frameCount or
+ `{@link android.hardware.camera2.CaptureResult#getFrameNumber}`.
+
+ LIMITED devices are strongly encouraged to use a non-negative
+ value. If UNKNOWN is used here then app developers do not have a way
+ to know when sensor settings have been applied.
+ </hal_details>
+ <tag id="V1" />
+ </entry>
+ </static>
+ </section>
+ <section name="reprocess">
+ <controls>
+ <entry name="effectiveExposureFactor" type="float" visibility="java_public" hwlevel="limited">
+ <description>
+ The amount of exposure time increase factor applied to the original output
+ frame by the application processing before sending for reprocessing.
+ </description>
+ <units>Relative exposure time increase factor.</units>
+ <range> &gt;= 1.0</range>
+ <details>
+ This is optional, and will be supported if the camera device supports YUV_REPROCESSING
+ capability (android.request.availableCapabilities contains YUV_REPROCESSING).
+
+ For some YUV reprocessing use cases, the application may choose to filter the original
+ output frames to effectively reduce the noise to the same level as a frame that was
+ captured with longer exposure time. To be more specific, assuming the original captured
+ images were captured with a sensitivity of S and an exposure time of T, the model in
+ the camera device is that the amount of noise in the image would be approximately what
+ would be expected if the original capture parameters had been a sensitivity of
+ S/effectiveExposureFactor and an exposure time of T*effectiveExposureFactor, rather
+ than S and T respectively. If the captured images were processed by the application
+ before being sent for reprocessing, then the application may have used image processing
+ algorithms and/or multi-frame image fusion to reduce the noise in the
+ application-processed images (input images). By using the effectiveExposureFactor
+ control, the application can communicate to the camera device the actual noise level
+ improvement in the application-processed image. With this information, the camera
+ device can select appropriate noise reduction and edge enhancement parameters to avoid
+ excessive noise reduction (android.noiseReduction.mode) and insufficient edge
+ enhancement (android.edge.mode) being applied to the reprocessed frames.
+
+ For example, for multi-frame image fusion use case, the application may fuse
+ multiple output frames together to a final frame for reprocessing. When N image are
+ fused into 1 image for reprocessing, the exposure time increase factor could be up to
+ square root of N (based on a simple photon shot noise model). The camera device will
+ adjust the reprocessing noise reduction and edge enhancement parameters accordingly to
+ produce the best quality images.
+
+ This is relative factor, 1.0 indicates the application hasn't processed the input
+ buffer in a way that affects its effective exposure time.
+
+ This control is only effective for YUV reprocessing capture request. For noise
+ reduction reprocessing, it is only effective when `android.noiseReduction.mode != OFF`.
+ Similarly, for edge enhancement reprocessing, it is only effective when
+ `android.edge.mode != OFF`.
+ </details>
+ <tag id="REPROC" />
+ </entry>
+ </controls>
+ <dynamic>
+ <clone entry="android.reprocess.effectiveExposureFactor" kind="controls">
+ </clone>
+ </dynamic>
+ <static>
+ <entry name="maxCaptureStall" type="int32" visibility="java_public" hwlevel="limited">
+ <description>
+ The maximal camera capture pipeline stall (in unit of frame count) introduced by a
+ reprocess capture request.
+ </description>
+ <units>Number of frames.</units>
+ <range> &lt;= 4</range>
+ <details>
+ The key describes the maximal interference that one reprocess (input) request
+ can introduce to the camera simultaneous streaming of regular (output) capture
+ requests, including repeating requests.
+
+ When a reprocessing capture request is submitted while a camera output repeating request
+ (e.g. preview) is being served by the camera device, it may preempt the camera capture
+ pipeline for at least one frame duration so that the camera device is unable to process
+ the following capture request in time for the next sensor start of exposure boundary.
+ When this happens, the application may observe a capture time gap (longer than one frame
+ duration) between adjacent capture output frames, which usually exhibits as preview
+ glitch if the repeating request output targets include a preview surface. This key gives
+ the worst-case number of frame stall introduced by one reprocess request with any kind of
+ formats/sizes combination.
+
+ If this key reports 0, it means a reprocess request doesn't introduce any glitch to the
+ ongoing camera repeating request outputs, as if this reprocess request is never issued.
+
+ This key is supported if the camera device supports PRIVATE or YUV reprocessing (
+ i.e. android.request.availableCapabilities contains PRIVATE_REPROCESSING or
+ YUV_REPROCESSING).
+ </details>
+ <tag id="REPROC" />
+ </entry>
+ </static>
+ </section>
+ <section name="depth">
+ <static>
+ <entry name="maxDepthSamples" type="int32" visibility="system" hwlevel="limited">
+ <description>Maximum number of points that a depth point cloud may contain.
+ </description>
+ <details>
+ If a camera device supports outputting depth range data in the form of a depth point
+ cloud ({@link android.graphics.ImageFormat#DEPTH_POINT_CLOUD}), this is the maximum
+ number of points an output buffer may contain.
+
+ Any given buffer may contain between 0 and maxDepthSamples points, inclusive.
+ If output in the depth point cloud format is not supported, this entry will
+ not be defined.
+ </details>
+ <tag id="DEPTH" />
+ </entry>
+ <entry name="availableDepthStreamConfigurations" type="int32" visibility="ndk_public"
+ enum="true" container="array" typedef="streamConfiguration" hwlevel="limited">
+ <array>
+ <size>n</size>
+ <size>4</size>
+ </array>
+ <enum>
+ <value>OUTPUT</value>
+ <value>INPUT</value>
+ </enum>
+ <description>The available depth dataspace stream
+ configurations that this camera device supports
+ (i.e. format, width, height, output/input stream).
+ </description>
+ <details>
+ These are output stream configurations for use with
+ dataSpace HAL_DATASPACE_DEPTH. The configurations are
+ listed as `(format, width, height, input?)` tuples.
+
+ Only devices that support depth output for at least
+ the HAL_PIXEL_FORMAT_Y16 dense depth map may include
+ this entry.
+
+ A device that also supports the HAL_PIXEL_FORMAT_BLOB
+ sparse depth point cloud must report a single entry for
+ the format in this list as `(HAL_PIXEL_FORMAT_BLOB,
+ android.depth.maxDepthSamples, 1, OUTPUT)` in addition to
+ the entries for HAL_PIXEL_FORMAT_Y16.
+ </details>
+ <tag id="DEPTH" />
+ </entry>
+ <entry name="availableDepthMinFrameDurations" type="int64" visibility="ndk_public"
+ container="array" typedef="streamConfigurationDuration" hwlevel="limited">
+ <array>
+ <size>4</size>
+ <size>n</size>
+ </array>
+ <description>This lists the minimum frame duration for each
+ format/size combination for depth output formats.
+ </description>
+ <units>(format, width, height, ns) x n</units>
+ <details>
+ This should correspond to the frame duration when only that
+ stream is active, with all processing (typically in android.*.mode)
+ set to either OFF or FAST.
+
+ When multiple streams are used in a request, the minimum frame
+ duration will be max(individual stream min durations).
+
+ The minimum frame duration of a stream (of a particular format, size)
+ is the same regardless of whether the stream is input or output.
+
+ See android.sensor.frameDuration and
+ android.scaler.availableStallDurations for more details about
+ calculating the max frame rate.
+ </details>
+ <tag id="DEPTH" />
+ </entry>
+ <entry name="availableDepthStallDurations" type="int64" visibility="ndk_public"
+ container="array" typedef="streamConfigurationDuration" hwlevel="limited">
+ <array>
+ <size>4</size>
+ <size>n</size>
+ </array>
+ <description>This lists the maximum stall duration for each
+ output format/size combination for depth streams.
+ </description>
+ <units>(format, width, height, ns) x n</units>
+ <details>
+ A stall duration is how much extra time would get added
+ to the normal minimum frame duration for a repeating request
+ that has streams with non-zero stall.
+
+ This functions similarly to
+ android.scaler.availableStallDurations for depth
+ streams.
+
+ All depth output stream formats may have a nonzero stall
+ duration.
+ </details>
+ <tag id="DEPTH" />
+ </entry>
+ <entry name="depthIsExclusive" type="byte" visibility="public"
+ enum="true" typedef="boolean" hwlevel="limited">
+ <enum>
+ <value>FALSE</value>
+ <value>TRUE</value>
+ </enum>
+ <description>Indicates whether a capture request may target both a
+ DEPTH16 / DEPTH_POINT_CLOUD output, and normal color outputs (such as
+ YUV_420_888, JPEG, or RAW) simultaneously.
+ </description>
+ <details>
+ If TRUE, including both depth and color outputs in a single
+ capture request is not supported. An application must interleave color
+ and depth requests. If FALSE, a single request can target both types
+ of output.
+
+ Typically, this restriction exists on camera devices that
+ need to emit a specific pattern or wavelength of light to
+ measure depth values, which causes the color image to be
+ corrupted during depth measurement.
+ </details>
+ </entry>
+ </static>
+ </section>
+ </namespace>
+</metadata>
diff --git a/camera/include/system/camera_metadata_tags.h b/camera/include/system/camera_metadata_tags.h
index 443af40..81dac87 100644
--- a/camera/include/system/camera_metadata_tags.h
+++ b/camera/include/system/camera_metadata_tags.h
@@ -347,7 +347,7 @@
ANDROID_STATISTICS_FACE_SCORES, // byte[] | ndk_public
ANDROID_STATISTICS_HISTOGRAM, // int32[] | system
ANDROID_STATISTICS_SHARPNESS_MAP, // int32[] | system
- ANDROID_STATISTICS_LENS_SHADING_CORRECTION_MAP, // byte | public
+ ANDROID_STATISTICS_LENS_SHADING_CORRECTION_MAP, // byte | java_public
ANDROID_STATISTICS_LENS_SHADING_MAP, // float[] | ndk_public
ANDROID_STATISTICS_PREDICTED_COLOR_GAINS, // float[] | hidden
ANDROID_STATISTICS_PREDICTED_COLOR_TRANSFORM, // rational[] | hidden
