| /****************************************************************************** |
| * |
| * Copyright 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * this file contains the L2CAP API definitions |
| * |
| ******************************************************************************/ |
| #ifndef L2C_API_H |
| #define L2C_API_H |
| |
| #include <vector> |
| #include <stdbool.h> |
| |
| #include "bt_target.h" |
| #include "hcidefs.h" |
| #include "l2cdefs.h" |
| #include "types/bt_transport.h" |
| #include "types/hci_role.h" |
| |
| /***************************************************************************** |
| * Constants |
| ****************************************************************************/ |
| |
| /* Define the minimum offset that L2CAP needs in a buffer. This is made up of |
| * HCI type(1), len(2), handle(2), L2CAP len(2) and CID(2) => 9 |
| */ |
| #define L2CAP_MIN_OFFSET 13 /* plus control(2), SDU length(2) */ |
| |
| #define L2CAP_LCC_SDU_LENGTH 2 |
| #define L2CAP_LCC_OFFSET \ |
| (L2CAP_MIN_OFFSET + L2CAP_LCC_SDU_LENGTH) /* plus SDU length(2) */ |
| |
| #define L2CAP_FCS_LENGTH 2 |
| |
| /* result code for L2CA_DataWrite() */ |
| #define L2CAP_DW_FAILED false |
| #define L2CAP_DW_SUCCESS true |
| #define L2CAP_DW_CONGESTED 2 |
| |
| /* Values for priority parameter to L2CA_SetAclPriority */ |
| typedef enum : uint8_t { |
| L2CAP_PRIORITY_NORMAL = 0, |
| L2CAP_PRIORITY_HIGH = 1, |
| } tL2CAP_PRIORITY; |
| |
| /* Values for priority parameter to L2CA_SetTxPriority */ |
| #define L2CAP_CHNL_PRIORITY_HIGH 0 |
| #define L2CAP_CHNL_PRIORITY_LOW 2 |
| |
| typedef uint8_t tL2CAP_CHNL_PRIORITY; |
| |
| /* Values for Tx/Rx data rate parameter to L2CA_SetChnlDataRate */ |
| #define L2CAP_CHNL_DATA_RATE_LOW 1 |
| |
| typedef uint8_t tL2CAP_CHNL_DATA_RATE; |
| |
| /* Data Packet Flags (bits 2-15 are reserved) */ |
| /* layer specific 14-15 bits are used for FCR SAR */ |
| #define L2CAP_FLUSHABLE_MASK 0x0003 |
| #define L2CAP_FLUSHABLE_CH_BASED 0x0000 |
| #define L2CAP_FLUSHABLE_PKT 0x0001 |
| #define L2CAP_NON_FLUSHABLE_PKT 0x0002 |
| |
| /* L2CA_FlushChannel num_to_flush definitions */ |
| #define L2CAP_FLUSH_CHANS_ALL 0xffff |
| #define L2CAP_FLUSH_CHANS_GET 0x0000 |
| |
| /* Values for 'allowed_modes' field passed in structure tL2CAP_ERTM_INFO |
| */ |
| #define L2CAP_FCR_CHAN_OPT_BASIC (1 << L2CAP_FCR_BASIC_MODE) |
| #define L2CAP_FCR_CHAN_OPT_ERTM (1 << L2CAP_FCR_ERTM_MODE) |
| |
| #define L2CAP_FCR_CHAN_OPT_ALL_MASK \ |
| (L2CAP_FCR_CHAN_OPT_BASIC | L2CAP_FCR_CHAN_OPT_ERTM) |
| |
| /* Validity check for PSM. PSM values must be odd. Also, all PSM values must |
| * be assigned such that the least significant bit of the most sigificant |
| * octet equals zero. |
| */ |
| #define L2C_INVALID_PSM(psm) (((psm)&0x0101) != 0x0001) |
| #define L2C_IS_VALID_PSM(psm) (((psm)&0x0101) == 0x0001) |
| #define L2C_IS_VALID_LE_PSM(psm) (((psm) > 0x0000) && ((psm) < 0x0100)) |
| |
| /***************************************************************************** |
| * Type Definitions |
| ****************************************************************************/ |
| |
| typedef struct { |
| #define L2CAP_FCR_BASIC_MODE 0x00 |
| #define L2CAP_FCR_ERTM_MODE 0x03 |
| #define L2CAP_FCR_LE_COC_MODE 0x05 |
| |
| uint8_t mode; |
| |
| uint8_t tx_win_sz; |
| uint8_t max_transmit; |
| uint16_t rtrans_tout; |
| uint16_t mon_tout; |
| uint16_t mps; |
| } tL2CAP_FCR_OPTS; |
| |
| /* default options for ERTM mode */ |
| constexpr tL2CAP_FCR_OPTS kDefaultErtmOptions = { |
| L2CAP_FCR_ERTM_MODE, |
| 10, /* Tx window size */ |
| 20, /* Maximum transmissions before disconnecting */ |
| 2000, /* Retransmission timeout (2 secs) */ |
| 12000, /* Monitor timeout (12 secs) */ |
| 1010 /* MPS segment size */ |
| }; |
| |
| typedef struct { |
| uint8_t qos_flags; /* TBD */ |
| uint8_t service_type; /* see below */ |
| uint32_t token_rate; /* bytes/second */ |
| uint32_t token_bucket_size; /* bytes */ |
| uint32_t peak_bandwidth; /* bytes/second */ |
| uint32_t latency; /* microseconds */ |
| uint32_t delay_variation; /* microseconds */ |
| } FLOW_SPEC; |
| |
| /* Values for service_type */ |
| #define SVC_TYPE_BEST_EFFORT 1 |
| #define SVC_TYPE_GUARANTEED 2 |
| |
| /* Define a structure to hold the configuration parameters. Since the |
| * parameters are optional, for each parameter there is a boolean to |
| * use to signify its presence or absence. |
| */ |
| typedef struct { |
| uint16_t result; /* Only used in confirm messages */ |
| bool mtu_present; |
| uint16_t mtu; |
| bool qos_present; |
| FLOW_SPEC qos; |
| bool flush_to_present; |
| uint16_t flush_to; |
| bool fcr_present; |
| tL2CAP_FCR_OPTS fcr; |
| bool fcs_present; /* Optionally bypasses FCS checks */ |
| uint8_t fcs; /* '0' if desire is to bypass FCS, otherwise '1' */ |
| bool ext_flow_spec_present; |
| tHCI_EXT_FLOW_SPEC ext_flow_spec; |
| uint16_t flags; /* bit 0: 0-no continuation, 1-continuation */ |
| } tL2CAP_CFG_INFO; |
| |
| /* LE credit based L2CAP connection parameters */ |
| constexpr uint16_t L2CAP_LE_MIN_MTU = 23; // Minimum SDU size |
| constexpr uint16_t L2CAP_LE_MIN_MPS = 23; |
| constexpr uint16_t L2CAP_LE_MAX_MPS = 65533; |
| constexpr uint16_t L2CAP_LE_CREDIT_MAX = 65535; |
| |
| // This is initial amout of credits we send, and amount to which we increase |
| // credits once they fall below threshold |
| constexpr uint16_t L2CAP_LE_CREDIT_DEFAULT = 0xffff; |
| |
| // If credit count on remote fall below this value, we send back credits to |
| // reach default value. |
| constexpr uint16_t L2CAP_LE_CREDIT_THRESHOLD = 0x0040; |
| |
| static_assert(L2CAP_LE_CREDIT_THRESHOLD < L2CAP_LE_CREDIT_DEFAULT, |
| "Threshold must be smaller than default credits"); |
| |
| /* Define a structure to hold the configuration parameter for LE L2CAP |
| * connection oriented channels. |
| */ |
| struct tL2CAP_LE_CFG_INFO { |
| uint16_t result; /* Only used in confirm messages */ |
| uint16_t mtu = 100; |
| uint16_t mps = 100; |
| uint16_t credits = L2CAP_LE_CREDIT_DEFAULT; |
| }; |
| |
| /********************************* |
| * Callback Functions Prototypes |
| *********************************/ |
| |
| /* Connection indication callback prototype. Parameters are |
| * BD Address of remote |
| * Local CID assigned to the connection |
| * PSM that the remote wants to connect to |
| * Identifier that the remote sent |
| */ |
| typedef void(tL2CA_CONNECT_IND_CB)(const RawAddress&, uint16_t, uint16_t, |
| uint8_t); |
| |
| /* Connection confirmation callback prototype. Parameters are |
| * Local CID |
| * Result - 0 = connected |
| * If there is an error, tL2CA_ERROR_CB is invoked |
| */ |
| typedef void(tL2CA_CONNECT_CFM_CB)(uint16_t, uint16_t); |
| |
| /* Configuration indication callback prototype. Parameters are |
| * Local CID assigned to the connection |
| * Pointer to configuration info |
| */ |
| typedef void(tL2CA_CONFIG_IND_CB)(uint16_t, tL2CAP_CFG_INFO*); |
| |
| constexpr uint16_t L2CAP_INITIATOR_LOCAL = 1; |
| constexpr uint16_t L2CAP_INITIATOR_REMOTE = 0; |
| /* Configuration confirm callback prototype. Parameters are |
| * Local CID assigned to the connection |
| * Initiator (1 for local, 0 for remote) |
| * Initial config from remote |
| * If there is an error, tL2CA_ERROR_CB is invoked |
| */ |
| typedef void(tL2CA_CONFIG_CFM_CB)(uint16_t, uint16_t, tL2CAP_CFG_INFO*); |
| |
| /* Disconnect indication callback prototype. Parameters are |
| * Local CID |
| * Boolean whether upper layer should ack this |
| */ |
| typedef void(tL2CA_DISCONNECT_IND_CB)(uint16_t, bool); |
| |
| /* Disconnect confirm callback prototype. Parameters are |
| * Local CID |
| * Result |
| */ |
| typedef void(tL2CA_DATA_IND_CB)(uint16_t, BT_HDR*); |
| |
| /* Congestion status callback protype. This callback is optional. If |
| * an application tries to send data when the transmit queue is full, |
| * the data will anyways be dropped. The parameter is: |
| * Local CID |
| * true if congested, false if uncongested |
| */ |
| typedef void(tL2CA_CONGESTION_STATUS_CB)(uint16_t, bool); |
| |
| /* Transmit complete callback protype. This callback is optional. If |
| * set, L2CAP will call it when packets are sent or flushed. If the |
| * count is 0xFFFF, it means all packets are sent for that CID (eRTM |
| * mode only). The parameters are: |
| * Local CID |
| * Number of SDUs sent or dropped |
| */ |
| typedef void(tL2CA_TX_COMPLETE_CB)(uint16_t, uint16_t); |
| |
| /* |
| * Notify the user when the remote send error result on ConnectRsp or ConfigRsp |
| * The parameters are: |
| * Local CID |
| * Error type (L2CAP_CONN_OTHER_ERROR for ConnectRsp, |
| * L2CAP_CFG_FAILED_NO_REASON for ConfigRsp) |
| */ |
| typedef void(tL2CA_ERROR_CB)(uint16_t, uint16_t); |
| |
| /* Create credit based connection request callback prototype. Parameters are |
| * BD Address of remote |
| * Vector of allocated local cids to accept |
| * PSM |
| * Peer MTU |
| * Identifier that the remote sent |
| */ |
| typedef void(tL2CA_CREDIT_BASED_CONNECT_IND_CB)(const RawAddress& bdaddr, |
| std::vector<uint16_t>& lcids, |
| uint16_t psm, uint16_t peer_mtu, |
| uint8_t identifier); |
| |
| /* Credit based connection confirmation callback prototype. Parameters are |
| * BD Address of remote |
| * Connected Local CIDs |
| * Peer MTU |
| * Result - 0 = connected, non-zero means CID is not connected |
| */ |
| typedef void(tL2CA_CREDIT_BASED_CONNECT_CFM_CB)(const RawAddress& bdaddr, |
| uint16_t lcid, |
| uint16_t peer_mtu, |
| uint16_t result); |
| |
| /* Credit based reconfiguration confirm callback prototype. Parameters are |
| * BD Address of remote |
| * Local CID assigned to the connection |
| * Flag indicating if this is local or peer configuration |
| * Pointer to configuration info |
| */ |
| typedef void(tL2CA_CREDIT_BASED_RECONFIG_COMPLETED_CB)( |
| const RawAddress& bdaddr, uint16_t lcid, bool is_local_cfg, |
| tL2CAP_LE_CFG_INFO* p_cfg); |
| |
| /* Define the structure that applications use to register with |
| * L2CAP. This structure includes callback functions. All functions |
| * MUST be provided, with the exception of the "connect pending" |
| * callback and "congestion status" callback. |
| */ |
| typedef struct { |
| tL2CA_CONNECT_IND_CB* pL2CA_ConnectInd_Cb; |
| tL2CA_CONNECT_CFM_CB* pL2CA_ConnectCfm_Cb; |
| tL2CA_CONFIG_IND_CB* pL2CA_ConfigInd_Cb; |
| tL2CA_CONFIG_CFM_CB* pL2CA_ConfigCfm_Cb; |
| tL2CA_DISCONNECT_IND_CB* pL2CA_DisconnectInd_Cb; |
| tL2CA_DATA_IND_CB* pL2CA_DataInd_Cb; |
| tL2CA_CONGESTION_STATUS_CB* pL2CA_CongestionStatus_Cb; |
| tL2CA_TX_COMPLETE_CB* pL2CA_TxComplete_Cb; |
| tL2CA_ERROR_CB* pL2CA_Error_Cb; |
| tL2CA_CREDIT_BASED_CONNECT_IND_CB* pL2CA_CreditBasedConnectInd_Cb; |
| tL2CA_CREDIT_BASED_CONNECT_CFM_CB* pL2CA_CreditBasedConnectCfm_Cb; |
| tL2CA_CREDIT_BASED_RECONFIG_COMPLETED_CB* |
| pL2CA_CreditBasedReconfigCompleted_Cb; |
| } tL2CAP_APPL_INFO; |
| |
| /* Define the structure that applications use to create or accept |
| * connections with enhanced retransmission mode. |
| */ |
| typedef struct { |
| uint8_t preferred_mode; |
| } tL2CAP_ERTM_INFO; |
| |
| /** |
| * Stack management declarations |
| */ |
| void l2c_init(); |
| void l2c_free(); |
| |
| /***************************************************************************** |
| * External Function Declarations |
| ****************************************************************************/ |
| |
| // Also does security for you |
| uint16_t L2CA_Register2(uint16_t psm, const tL2CAP_APPL_INFO& p_cb_info, |
| bool enable_snoop, tL2CAP_ERTM_INFO* p_ertm_info, |
| uint16_t my_mtu, uint16_t required_remote_mtu, |
| uint16_t sec_level); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_Register |
| * |
| * Description Other layers call this function to register for L2CAP |
| * services. |
| * |
| * Returns PSM to use or zero if error. Typically, the PSM returned |
| * is the same as was passed in, but for an outgoing-only |
| * connection to a dynamic PSM, a "virtual" PSM is returned |
| * and should be used in the calls to L2CA_ConnectReq() and |
| * BTM_SetSecurityLevel(). |
| * |
| ******************************************************************************/ |
| extern uint16_t L2CA_Register(uint16_t psm, const tL2CAP_APPL_INFO& p_cb_info, |
| bool enable_snoop, tL2CAP_ERTM_INFO* p_ertm_info, |
| uint16_t my_mtu, uint16_t required_remote_mtu, |
| uint16_t sec_level); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_Deregister |
| * |
| * Description Other layers call this function to deregister for L2CAP |
| * services. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| extern void L2CA_Deregister(uint16_t psm); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_AllocateLePSM |
| * |
| * Description Other layers call this function to find an unused LE PSM for |
| * L2CAP services. |
| * |
| * Returns LE_PSM to use if success. Otherwise returns 0. |
| * |
| ******************************************************************************/ |
| extern uint16_t L2CA_AllocateLePSM(void); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_FreeLePSM |
| * |
| * Description Free an assigned LE PSM. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| extern void L2CA_FreeLePSM(uint16_t psm); |
| |
| extern uint16_t L2CA_ConnectReq2(uint16_t psm, const RawAddress& p_bd_addr, |
| uint16_t sec_level); |
| /******************************************************************************* |
| * |
| * Function L2CA_ConnectReq |
| * |
| * Description Higher layers call this function to create an L2CAP |
| * connection. |
| * Note that the connection is not established at this time, |
| * but connection establishment gets started. The callback |
| * will be invoked when connection establishes or fails. |
| * |
| * Returns the CID of the connection, or 0 if it failed to start |
| * |
| ******************************************************************************/ |
| extern uint16_t L2CA_ConnectReq(uint16_t psm, const RawAddress& p_bd_addr); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_RegisterLECoc |
| * |
| * Description Other layers call this function to register for L2CAP |
| * Connection Oriented Channel. |
| * |
| * Returns PSM to use or zero if error. Typically, the PSM returned |
| * is the same as was passed in, but for an outgoing-only |
| * connection to a dynamic PSM, a "virtual" PSM is returned |
| * and should be used in the calls to L2CA_ConnectLECocReq() |
| * and BTM_SetSecurityLevel(). |
| * |
| ******************************************************************************/ |
| extern uint16_t L2CA_RegisterLECoc(uint16_t psm, |
| const tL2CAP_APPL_INFO& p_cb_info, |
| uint16_t sec_level, tL2CAP_LE_CFG_INFO cfg); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_DeregisterLECoc |
| * |
| * Description Other layers call this function to deregister for L2CAP |
| * Connection Oriented Channel. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| extern void L2CA_DeregisterLECoc(uint16_t psm); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_ConnectLECocReq |
| * |
| * Description Higher layers call this function to create an L2CAP LE COC. |
| * Note that the connection is not established at this time, |
| * but connection establishment gets started. The callback |
| * will be invoked when connection establishes or fails. |
| * |
| * Returns the CID of the connection, or 0 if it failed to start |
| * |
| ******************************************************************************/ |
| extern uint16_t L2CA_ConnectLECocReq(uint16_t psm, const RawAddress& p_bd_addr, |
| tL2CAP_LE_CFG_INFO* p_cfg, |
| uint16_t sec_level); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_GetPeerLECocConfig |
| * |
| * Description Get peers configuration for LE Connection Oriented Channel. |
| * |
| * Return value: true if peer is connected |
| * |
| ******************************************************************************/ |
| extern bool L2CA_GetPeerLECocConfig(uint16_t lcid, |
| tL2CAP_LE_CFG_INFO* peer_cfg); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_ReconfigCreditBasedConnsReq |
| * |
| * Description Start reconfigure procedure on Connection Oriented Channel. |
| * |
| * Return value: true if peer is connected |
| * |
| ******************************************************************************/ |
| |
| extern bool L2CA_ReconfigCreditBasedConnsReq(const RawAddress& bd_addr, |
| std::vector<uint16_t>& lcids, |
| tL2CAP_LE_CFG_INFO* p_cfg); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_ConnectCreditBasedReq |
| * |
| * Description With this function L2CAP will initiate setup of up to 5 credit |
| * based connections for given psm using provided configuration. |
| * L2CAP will notify user on the connection result, by calling |
| * pL2CA_CreditBasedConnectCfm_Cb for each cid with a result. |
| * |
| * Return value: vector of allocated local cids for the connection |
| * |
| ******************************************************************************/ |
| |
| extern std::vector<uint16_t> L2CA_ConnectCreditBasedReq( |
| uint16_t psm, const RawAddress& p_bd_addr, tL2CAP_LE_CFG_INFO* p_cfg); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_ConnectCreditBasedRsp |
| * |
| * Description Response for the pL2CA_CreditBasedConnectInd_Cb which is the |
| * indication for peer requesting credit based connection. |
| * |
| * Return value: true if peer is connected |
| * |
| ******************************************************************************/ |
| |
| extern bool L2CA_ConnectCreditBasedRsp(const RawAddress& p_bd_addr, uint8_t id, |
| std::vector<uint16_t>& accepted_lcids, |
| uint16_t result, |
| tL2CAP_LE_CFG_INFO* p_cfg); |
| /******************************************************************************* |
| * |
| * Function L2CA_DisconnectReq |
| * |
| * Description Higher layers call this function to disconnect a channel. |
| * |
| * Returns true if disconnect sent, else false |
| * |
| ******************************************************************************/ |
| extern bool L2CA_DisconnectReq(uint16_t cid); |
| |
| extern bool L2CA_DisconnectLECocReq(uint16_t cid); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_DataWrite |
| * |
| * Description Higher layers call this function to write data. |
| * |
| * Returns L2CAP_DW_SUCCESS, if data accepted, else false |
| * L2CAP_DW_CONGESTED, if data accepted and the channel is |
| * congested |
| * L2CAP_DW_FAILED, if error |
| * |
| ******************************************************************************/ |
| extern uint8_t L2CA_DataWrite(uint16_t cid, BT_HDR* p_data); |
| |
| extern uint8_t L2CA_LECocDataWrite(uint16_t cid, BT_HDR* p_data); |
| |
| // Given a local channel identifier, |lcid|, this function returns the bound |
| // remote channel identifier, |rcid|. If |
| // |lcid| is not known or is invalid, this function returns false and does not |
| // modify the value pointed at by |rcid|. |rcid| may be NULL. |
| bool L2CA_GetRemoteCid(uint16_t lcid, uint16_t* rcid); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_SetIdleTimeoutByBdAddr |
| * |
| * Description Higher layers call this function to set the idle timeout for |
| * a connection. The "idle timeout" is the amount of time that |
| * a connection can remain up with no L2CAP channels on it. |
| * A timeout of zero means that the connection will be torn |
| * down immediately when the last channel is removed. |
| * A timeout of 0xFFFF means no timeout. Values are in seconds. |
| * A bd_addr is the remote BD address. If bd_addr = |
| * RawAddress::kAny, then the idle timeouts for all active |
| * l2cap links will be changed. |
| * |
| * Returns true if command succeeded, false if failed |
| * |
| * NOTE This timeout applies to all logical channels active on the |
| * ACL link. |
| ******************************************************************************/ |
| extern bool L2CA_SetIdleTimeoutByBdAddr(const RawAddress& bd_addr, |
| uint16_t timeout, |
| tBT_TRANSPORT transport); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_SetTraceLevel |
| * |
| * Description This function sets the trace level for L2CAP. If called with |
| * a value of 0xFF, it simply reads the current trace level. |
| * |
| * Returns the new (current) trace level |
| * |
| ******************************************************************************/ |
| extern uint8_t L2CA_SetTraceLevel(uint8_t trace_level); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_FlushChannel |
| * |
| * Description This function flushes none, some or all buffers queued up |
| * for xmission for a particular CID. If called with |
| * L2CAP_FLUSH_CHANS_GET (0), it simply returns the number |
| * of buffers queued for that CID L2CAP_FLUSH_CHANS_ALL (0xffff) |
| * flushes all buffers. All other values specifies the maximum |
| * buffers to flush. |
| * |
| * Returns Number of buffers left queued for that CID |
| * |
| ******************************************************************************/ |
| extern uint16_t L2CA_FlushChannel(uint16_t lcid, uint16_t num_to_flush); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_SetAclPriority |
| * |
| * Description Sets the transmission priority for an ACL channel. |
| * (For initial implementation only two values are valid. |
| * L2CAP_PRIORITY_NORMAL and L2CAP_PRIORITY_HIGH). |
| * |
| * Returns true if a valid channel, else false |
| * |
| ******************************************************************************/ |
| extern bool L2CA_SetAclPriority(const RawAddress& bd_addr, |
| tL2CAP_PRIORITY priority); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_SetTxPriority |
| * |
| * Description Sets the transmission priority for a channel. (FCR Mode) |
| * |
| * Returns true if a valid channel, else false |
| * |
| ******************************************************************************/ |
| extern bool L2CA_SetTxPriority(uint16_t cid, tL2CAP_CHNL_PRIORITY priority); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_SetChnlFlushability |
| * |
| * Description Higher layers call this function to set a channels |
| * flushability flags |
| * |
| * Returns true if CID found, else false |
| * |
| ******************************************************************************/ |
| extern bool L2CA_SetChnlFlushability(uint16_t cid, bool is_flushable); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_GetPeerFeatures |
| * |
| * Description Get a peers features and fixed channel map |
| * |
| * Parameters: BD address of the peer |
| * Pointers to features and channel mask storage area |
| * |
| * Return value: true if peer is connected |
| * |
| ******************************************************************************/ |
| extern bool L2CA_GetPeerFeatures(const RawAddress& bd_addr, |
| uint32_t* p_ext_feat, uint8_t* p_chnl_mask); |
| |
| /******************************************************************************* |
| * |
| * Fixed Channel callback prototypes |
| * |
| ******************************************************************************/ |
| |
| /* Fixed channel connected and disconnected. Parameters are |
| * channel |
| * BD Address of remote |
| * true if channel is connected, false if disconnected |
| * Reason for connection failure |
| * transport : physical transport, BR/EDR or LE |
| */ |
| typedef void(tL2CA_FIXED_CHNL_CB)(uint16_t, const RawAddress&, bool, uint16_t, |
| tBT_TRANSPORT); |
| |
| /* Signalling data received. Parameters are |
| * channel |
| * BD Address of remote |
| * Pointer to buffer with data |
| */ |
| typedef void(tL2CA_FIXED_DATA_CB)(uint16_t, const RawAddress&, BT_HDR*); |
| |
| /* Congestion status callback protype. This callback is optional. If |
| * an application tries to send data when the transmit queue is full, |
| * the data will anyways be dropped. The parameter is: |
| * remote BD_ADDR |
| * true if congested, false if uncongested |
| */ |
| typedef void(tL2CA_FIXED_CONGESTION_STATUS_CB)(const RawAddress&, bool); |
| |
| /* Fixed channel registration info (the callback addresses and channel config) |
| */ |
| typedef struct { |
| tL2CA_FIXED_CHNL_CB* pL2CA_FixedConn_Cb; |
| tL2CA_FIXED_DATA_CB* pL2CA_FixedData_Cb; |
| tL2CA_FIXED_CONGESTION_STATUS_CB* pL2CA_FixedCong_Cb; |
| |
| uint16_t default_idle_tout; |
| } tL2CAP_FIXED_CHNL_REG; |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_RegisterFixedChannel |
| * |
| * Description Register a fixed channel. |
| * |
| * Parameters: Fixed Channel # |
| * Channel Callbacks and config |
| * |
| * Return value: true if registered OK |
| * |
| ******************************************************************************/ |
| extern bool L2CA_RegisterFixedChannel(uint16_t fixed_cid, |
| tL2CAP_FIXED_CHNL_REG* p_freg); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_ConnectFixedChnl |
| * |
| * Description Connect an fixed signalling channel to a remote device. |
| * |
| * Parameters: Fixed CID |
| * BD Address of remote |
| * |
| * Return value: true if connection started |
| * |
| ******************************************************************************/ |
| extern bool L2CA_ConnectFixedChnl(uint16_t fixed_cid, |
| const RawAddress& bd_addr); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_SendFixedChnlData |
| * |
| * Description Write data on a fixed signalling channel. |
| * |
| * Parameters: Fixed CID |
| * BD Address of remote |
| * Pointer to buffer of type BT_HDR |
| * |
| * Return value L2CAP_DW_SUCCESS, if data accepted |
| * L2CAP_DW_FAILED, if error |
| * |
| ******************************************************************************/ |
| extern uint16_t L2CA_SendFixedChnlData(uint16_t fixed_cid, |
| const RawAddress& rem_bda, |
| BT_HDR* p_buf); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_RemoveFixedChnl |
| * |
| * Description Remove a fixed channel to a remote device. |
| * |
| * Parameters: Fixed CID |
| * BD Address of remote |
| * Idle timeout to use (or 0xFFFF if don't care) |
| * |
| * Return value: true if channel removed |
| * |
| ******************************************************************************/ |
| extern bool L2CA_RemoveFixedChnl(uint16_t fixed_cid, const RawAddress& rem_bda); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_SetLeGattTimeout |
| * |
| * Description Higher layers call this function to set the idle timeout for |
| * a fixed channel. The "idle timeout" is the amount of time |
| * that a connection can remain up with no L2CAP channels on |
| * it. A timeout of zero means that the connection will be torn |
| * down immediately when the last channel is removed. |
| * A timeout of 0xFFFF means no timeout. Values are in seconds. |
| * A bd_addr is the remote BD address. If bd_addr = |
| * RawAddress::kAny, then the idle timeouts for all active |
| * l2cap links will be changed. |
| * |
| * Returns true if command succeeded, false if failed |
| * |
| ******************************************************************************/ |
| extern bool L2CA_SetLeGattTimeout(const RawAddress& rem_bda, |
| uint16_t idle_tout); |
| |
| extern bool L2CA_UpdateBleConnParams(const RawAddress& rem_bda, |
| uint16_t min_int, uint16_t max_int, |
| uint16_t latency, uint16_t timeout, |
| uint16_t min_ce_len, uint16_t max_ce_len); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_EnableUpdateBleConnParams |
| * |
| * Description Update BLE connection parameters. |
| * |
| * Parameters: BD Address of remote |
| * enable flag |
| * |
| * Return value: true if update started |
| * |
| ******************************************************************************/ |
| extern bool L2CA_EnableUpdateBleConnParams(const RawAddress& rem_bda, |
| bool enable); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_GetBleConnRole |
| * |
| * Description This function returns the connection role. |
| * |
| * Returns link role. |
| * |
| ******************************************************************************/ |
| extern tHCI_ROLE L2CA_GetBleConnRole(const RawAddress& bd_addr); |
| |
| extern void L2CA_AdjustConnectionIntervals(uint16_t* min_interval, |
| uint16_t* max_interval, |
| uint16_t floor_interval); |
| |
| /** |
| * Check whether an ACL or LE link to the remote device is established |
| */ |
| extern bool L2CA_IsLinkEstablished(const RawAddress& bd_addr, |
| tBT_TRANSPORT transport); |
| |
| #endif /* L2C_API_H */ |