| /****************************************************************************** |
| * |
| * Copyright 2009-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * this file contains functions relating to BLE management. |
| * |
| ******************************************************************************/ |
| |
| #define LOG_TAG "l2c_ble" |
| |
| #include <base/logging.h> |
| #include <base/strings/stringprintf.h> |
| |
| #include "bt_target.h" |
| #include "bta_hearing_aid_api.h" |
| #include "device/include/controller.h" |
| #include "hcimsgs.h" |
| #include "l2c_api.h" |
| #include "l2c_int.h" |
| #include "l2cdefs.h" |
| #include "main/shim/l2c_api.h" |
| #include "main/shim/shim.h" |
| #include "osi/include/log.h" |
| #include "osi/include/osi.h" |
| #include "stack/btm/btm_dev.h" |
| #include "stack/btm/btm_sec.h" |
| #include "stack/include/acl_api.h" |
| #include "stack_config.h" |
| |
| tL2CAP_LE_RESULT_CODE btm_ble_start_sec_check(const RawAddress& bd_addr, |
| uint16_t psm, bool is_originator, |
| tBTM_SEC_CALLBACK* p_callback, |
| void* p_ref_data); |
| |
| extern tBTM_CB btm_cb; |
| |
| using base::StringPrintf; |
| |
| static void l2cble_start_conn_update(tL2C_LCB* p_lcb); |
| extern void gatt_notify_conn_update(const RawAddress& remote, uint16_t interval, |
| uint16_t latency, uint16_t timeout, |
| tHCI_STATUS status); |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_UpdateBleConnParams |
| * |
| * Description Update BLE connection parameters. |
| * |
| * Parameters: BD Address of remote |
| * |
| * Return value: true if update started |
| * |
| ******************************************************************************/ |
| bool L2CA_UpdateBleConnParams(const RawAddress& rem_bda, uint16_t min_int, |
| uint16_t max_int, uint16_t latency, |
| uint16_t timeout, uint16_t min_ce_len, |
| uint16_t max_ce_len) { |
| if (bluetooth::shim::is_gd_l2cap_enabled()) { |
| bluetooth::shim::L2CA_LeConnectionUpdate(rem_bda, min_int, max_int, latency, |
| timeout, min_ce_len, max_ce_len); |
| return true; |
| } |
| |
| tL2C_LCB* p_lcb; |
| |
| /* See if we have a link control block for the remote device */ |
| p_lcb = l2cu_find_lcb_by_bd_addr(rem_bda, BT_TRANSPORT_LE); |
| |
| /* If we do not have one, create one and accept the connection. */ |
| if (!p_lcb || !BTM_IsAclConnectionUp(rem_bda, BT_TRANSPORT_LE)) { |
| LOG(WARNING) << __func__ << " - unknown BD_ADDR " << rem_bda; |
| return (false); |
| } |
| |
| if (p_lcb->transport != BT_TRANSPORT_LE) { |
| LOG(WARNING) << __func__ << " - BD_ADDR " << rem_bda << " not LE"; |
| return (false); |
| } |
| |
| VLOG(2) << __func__ << ": BD_ADDR=" << rem_bda << ", min_int=" << min_int |
| << ", max_int=" << max_int << ", min_ce_len=" << min_ce_len |
| << ", max_ce_len=" << max_ce_len; |
| |
| p_lcb->min_interval = min_int; |
| p_lcb->max_interval = max_int; |
| p_lcb->latency = latency; |
| p_lcb->timeout = timeout; |
| p_lcb->conn_update_mask |= L2C_BLE_NEW_CONN_PARAM; |
| p_lcb->min_ce_len = min_ce_len; |
| p_lcb->max_ce_len = max_ce_len; |
| |
| l2cble_start_conn_update(p_lcb); |
| |
| return (true); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function L2CA_EnableUpdateBleConnParams |
| * |
| * Description Enable or disable update based on the request from the peer |
| * |
| * Parameters: BD Address of remote |
| * |
| * Return value: true if update started |
| * |
| ******************************************************************************/ |
| bool L2CA_EnableUpdateBleConnParams(const RawAddress& rem_bda, bool enable) { |
| if (bluetooth::shim::is_gd_l2cap_enabled()) { |
| return bluetooth::shim::L2CA_EnableUpdateBleConnParams(rem_bda, enable); |
| } |
| |
| if (stack_config_get_interface()->get_pts_conn_updates_disabled()) |
| return false; |
| |
| tL2C_LCB* p_lcb; |
| |
| /* See if we have a link control block for the remote device */ |
| p_lcb = l2cu_find_lcb_by_bd_addr(rem_bda, BT_TRANSPORT_LE); |
| |
| if (!p_lcb) { |
| LOG(WARNING) << __func__ << " - unknown BD_ADDR " << rem_bda; |
| return false; |
| } |
| |
| VLOG(2) << __func__ << " - BD_ADDR " << rem_bda |
| << StringPrintf(" enable %d current upd state 0x%02x", enable, |
| p_lcb->conn_update_mask); |
| |
| if (p_lcb->transport != BT_TRANSPORT_LE) { |
| LOG(WARNING) << __func__ << " - BD_ADDR " << rem_bda |
| << " not LE, link role " << p_lcb->LinkRole(); |
| return false; |
| } |
| |
| if (enable) |
| p_lcb->conn_update_mask &= ~L2C_BLE_CONN_UPDATE_DISABLE; |
| else |
| p_lcb->conn_update_mask |= L2C_BLE_CONN_UPDATE_DISABLE; |
| |
| l2cble_start_conn_update(p_lcb); |
| |
| return (true); |
| } |
| |
| hci_role_t L2CA_GetBleConnRole(const RawAddress& bd_addr) { |
| if (bluetooth::shim::is_gd_l2cap_enabled()) { |
| return bluetooth::shim::L2CA_GetBleConnRole(bd_addr); |
| } |
| |
| tL2C_LCB* p_lcb = l2cu_find_lcb_by_bd_addr(bd_addr, BT_TRANSPORT_LE); |
| if (p_lcb == nullptr) { |
| return HCI_ROLE_UNKNOWN; |
| } |
| return p_lcb->LinkRole(); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function l2cble_notify_le_connection |
| * |
| * Description This function notifiy the l2cap connection to the app layer |
| * |
| * Returns none |
| * |
| ******************************************************************************/ |
| void l2cble_notify_le_connection(const RawAddress& bda) { |
| tL2C_LCB* p_lcb = l2cu_find_lcb_by_bd_addr(bda, BT_TRANSPORT_LE); |
| if (p_lcb == nullptr) { |
| LOG_WARN("Received notification for le connection but no lcb found"); |
| return; |
| } |
| |
| if (BTM_IsAclConnectionUp(bda, BT_TRANSPORT_LE) && |
| p_lcb->link_state != LST_CONNECTED) { |
| /* update link status */ |
| // TODO Move this back into acl layer |
| btm_establish_continue_from_address(bda, BT_TRANSPORT_LE); |
| /* update l2cap link status and send callback */ |
| p_lcb->link_state = LST_CONNECTED; |
| l2cu_process_fixed_chnl_resp(p_lcb); |
| } |
| |
| /* For all channels, send the event through their FSMs */ |
| for (tL2C_CCB* p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; |
| p_ccb = p_ccb->p_next_ccb) { |
| if (p_ccb->chnl_state == CST_CLOSED) |
| l2c_csm_execute(p_ccb, L2CEVT_LP_CONNECT_CFM, NULL); |
| } |
| } |
| |
| /** This function is called when an HCI Connection Complete event is received. |
| */ |
| bool l2cble_conn_comp(uint16_t handle, uint8_t role, const RawAddress& bda, |
| tBLE_ADDR_TYPE type, uint16_t conn_interval, |
| uint16_t conn_latency, uint16_t conn_timeout) { |
| // role == HCI_ROLE_CENTRAL => scanner completed connection |
| // role == HCI_ROLE_PERIPHERAL => advertiser completed connection |
| |
| /* See if we have a link control block for the remote device */ |
| tL2C_LCB* p_lcb = l2cu_find_lcb_by_bd_addr(bda, BT_TRANSPORT_LE); |
| |
| /* If we do not have one, create one. this is auto connection complete. */ |
| if (!p_lcb) { |
| p_lcb = l2cu_allocate_lcb(bda, false, BT_TRANSPORT_LE); |
| if (!p_lcb) { |
| LOG_ERROR("Unable to allocate link resource for le acl connection"); |
| return false; |
| } else { |
| if (!l2cu_initialize_fixed_ccb(p_lcb, L2CAP_ATT_CID)) { |
| LOG_ERROR("Unable to allocate channel resource for le acl connection"); |
| return false; |
| } |
| } |
| } else if (role == HCI_ROLE_CENTRAL && p_lcb->link_state != LST_CONNECTING) { |
| LOG_ERROR( |
| "Received le acl connection as role central but not in connecting " |
| "state"); |
| return false; |
| } |
| |
| if (role == HCI_ROLE_CENTRAL) alarm_cancel(p_lcb->l2c_lcb_timer); |
| |
| /* Save the handle */ |
| l2cu_set_lcb_handle(*p_lcb, handle); |
| |
| /* Connected OK. Change state to connected, we were scanning so we are central |
| */ |
| if (role == HCI_ROLE_CENTRAL) { |
| p_lcb->SetLinkRoleAsCentral(); |
| } else { |
| p_lcb->SetLinkRoleAsPeripheral(); |
| } |
| |
| p_lcb->transport = BT_TRANSPORT_LE; |
| |
| /* update link parameter, set peripheral link as non-spec default upon link up |
| */ |
| p_lcb->min_interval = p_lcb->max_interval = conn_interval; |
| p_lcb->timeout = conn_timeout; |
| p_lcb->latency = conn_latency; |
| p_lcb->conn_update_mask = L2C_BLE_NOT_DEFAULT_PARAM; |
| |
| p_lcb->peer_chnl_mask[0] = L2CAP_FIXED_CHNL_ATT_BIT | |
| L2CAP_FIXED_CHNL_BLE_SIG_BIT | |
| L2CAP_FIXED_CHNL_SMP_BIT; |
| |
| if (role == HCI_ROLE_PERIPHERAL) { |
| if (!controller_get_interface() |
| ->supports_ble_peripheral_initiated_feature_exchange()) { |
| p_lcb->link_state = LST_CONNECTED; |
| l2cu_process_fixed_chnl_resp(p_lcb); |
| } |
| } |
| return true; |
| } |
| |
| bool l2cble_conn_comp_from_address_with_type( |
| uint16_t handle, uint8_t role, const tBLE_BD_ADDR& address_with_type, |
| uint16_t conn_interval, uint16_t conn_latency, uint16_t conn_timeout) { |
| return l2cble_conn_comp(handle, role, address_with_type.bda, |
| address_with_type.type, conn_interval, conn_latency, |
| conn_timeout); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function l2cble_start_conn_update |
| * |
| * Description Start the BLE connection parameter update process based on |
| * status. |
| * |
| * Parameters: lcb : l2cap link control block |
| * |
| * Return value: none |
| * |
| ******************************************************************************/ |
| static void l2cble_start_conn_update(tL2C_LCB* p_lcb) { |
| uint16_t min_conn_int, max_conn_int, peripheral_latency, supervision_tout; |
| if (!BTM_IsAclConnectionUp(p_lcb->remote_bd_addr, BT_TRANSPORT_LE)) { |
| LOG(ERROR) << "No known connection ACL for " << p_lcb->remote_bd_addr; |
| return; |
| } |
| |
| // TODO(armansito): The return value of this call wasn't being used but the |
| // logic of this function might be depending on its side effects. We should |
| // verify if this call is needed at all and remove it otherwise. |
| btm_find_or_alloc_dev(p_lcb->remote_bd_addr); |
| |
| if (p_lcb->conn_update_mask & L2C_BLE_UPDATE_PENDING) return; |
| |
| if (p_lcb->conn_update_mask & L2C_BLE_CONN_UPDATE_DISABLE) { |
| /* application requests to disable parameters update. |
| If parameters are already updated, lets set them |
| up to what has been requested during connection establishement */ |
| if (p_lcb->conn_update_mask & L2C_BLE_NOT_DEFAULT_PARAM && |
| /* current connection interval is greater than default min */ |
| p_lcb->min_interval > BTM_BLE_CONN_INT_MIN) { |
| /* use 7.5 ms as fast connection parameter, 0 peripheral latency */ |
| min_conn_int = max_conn_int = BTM_BLE_CONN_INT_MIN; |
| |
| L2CA_AdjustConnectionIntervals(&min_conn_int, &max_conn_int, |
| BTM_BLE_CONN_INT_MIN); |
| |
| peripheral_latency = BTM_BLE_CONN_PERIPHERAL_LATENCY_DEF; |
| supervision_tout = BTM_BLE_CONN_TIMEOUT_DEF; |
| |
| /* if both side 4.1, or we are central device, send HCI command */ |
| if (p_lcb->IsLinkRoleCentral() |
| || (controller_get_interface() |
| ->supports_ble_connection_parameter_request() && |
| acl_peer_supports_ble_connection_parameters_request( |
| p_lcb->remote_bd_addr)) |
| ) { |
| btsnd_hcic_ble_upd_ll_conn_params(p_lcb->Handle(), min_conn_int, |
| max_conn_int, peripheral_latency, |
| supervision_tout, 0, 0); |
| p_lcb->conn_update_mask |= L2C_BLE_UPDATE_PENDING; |
| } else { |
| l2cu_send_peer_ble_par_req(p_lcb, min_conn_int, max_conn_int, |
| peripheral_latency, supervision_tout); |
| } |
| p_lcb->conn_update_mask &= ~L2C_BLE_NOT_DEFAULT_PARAM; |
| p_lcb->conn_update_mask |= L2C_BLE_NEW_CONN_PARAM; |
| } |
| } else { |
| /* application allows to do update, if we were delaying one do it now */ |
| if (p_lcb->conn_update_mask & L2C_BLE_NEW_CONN_PARAM) { |
| /* if both side 4.1, or we are central device, send HCI command */ |
| if (p_lcb->IsLinkRoleCentral() |
| || (controller_get_interface() |
| ->supports_ble_connection_parameter_request() && |
| acl_peer_supports_ble_connection_parameters_request( |
| p_lcb->remote_bd_addr)) |
| ) { |
| btsnd_hcic_ble_upd_ll_conn_params(p_lcb->Handle(), p_lcb->min_interval, |
| p_lcb->max_interval, p_lcb->latency, |
| p_lcb->timeout, p_lcb->min_ce_len, |
| p_lcb->max_ce_len); |
| p_lcb->conn_update_mask |= L2C_BLE_UPDATE_PENDING; |
| } else { |
| l2cu_send_peer_ble_par_req(p_lcb, p_lcb->min_interval, |
| p_lcb->max_interval, p_lcb->latency, |
| p_lcb->timeout); |
| } |
| p_lcb->conn_update_mask &= ~L2C_BLE_NEW_CONN_PARAM; |
| p_lcb->conn_update_mask |= L2C_BLE_NOT_DEFAULT_PARAM; |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function l2cble_process_conn_update_evt |
| * |
| * Description This function enables the connection update request from |
| * remote after a successful connection update response is |
| * received. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void l2cble_process_conn_update_evt(uint16_t handle, uint8_t status, |
| uint16_t interval, uint16_t latency, |
| uint16_t timeout) { |
| L2CAP_TRACE_DEBUG("%s", __func__); |
| |
| /* See if we have a link control block for the remote device */ |
| tL2C_LCB* p_lcb = l2cu_find_lcb_by_handle(handle); |
| if (!p_lcb) { |
| L2CAP_TRACE_WARNING("%s: Invalid handle: %d", __func__, handle); |
| return; |
| } |
| |
| p_lcb->conn_update_mask &= ~L2C_BLE_UPDATE_PENDING; |
| |
| if (status != HCI_SUCCESS) { |
| L2CAP_TRACE_WARNING("%s: Error status: %d", __func__, status); |
| } |
| |
| l2cble_start_conn_update(p_lcb); |
| |
| L2CAP_TRACE_DEBUG("%s: conn_update_mask=%d", __func__, |
| p_lcb->conn_update_mask); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function l2cble_process_sig_cmd |
| * |
| * Description This function is called when a signalling packet is received |
| * on the BLE signalling CID |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void l2cble_process_sig_cmd(tL2C_LCB* p_lcb, uint8_t* p, uint16_t pkt_len) { |
| uint8_t* p_pkt_end; |
| uint8_t cmd_code, id; |
| uint16_t cmd_len; |
| uint16_t min_interval, max_interval, latency, timeout; |
| tL2C_CONN_INFO con_info; |
| uint16_t lcid = 0, rcid = 0, mtu = 0, mps = 0, initial_credit = 0; |
| tL2C_CCB *p_ccb = NULL, *temp_p_ccb = NULL; |
| tL2C_RCB* p_rcb; |
| uint16_t credit; |
| uint8_t num_of_channels; |
| |
| p_pkt_end = p + pkt_len; |
| |
| if (p + 4 > p_pkt_end) { |
| android_errorWriteLog(0x534e4554, "80261585"); |
| LOG(ERROR) << "invalid read"; |
| return; |
| } |
| |
| STREAM_TO_UINT8(cmd_code, p); |
| STREAM_TO_UINT8(id, p); |
| STREAM_TO_UINT16(cmd_len, p); |
| |
| /* Check command length does not exceed packet length */ |
| if ((p + cmd_len) > p_pkt_end) { |
| L2CAP_TRACE_WARNING( |
| "L2CAP - LE - format error, pkt_len: %d cmd_len: %d code: %d", |
| pkt_len, cmd_len, cmd_code); |
| return; |
| } |
| |
| switch (cmd_code) { |
| case L2CAP_CMD_REJECT: |
| p += 2; |
| break; |
| |
| case L2CAP_CMD_ECHO_REQ: |
| case L2CAP_CMD_ECHO_RSP: |
| case L2CAP_CMD_INFO_RSP: |
| case L2CAP_CMD_INFO_REQ: |
| l2cu_send_peer_cmd_reject(p_lcb, L2CAP_CMD_REJ_NOT_UNDERSTOOD, id, 0, 0); |
| break; |
| |
| case L2CAP_CMD_BLE_UPDATE_REQ: |
| if (p + 8 > p_pkt_end) { |
| android_errorWriteLog(0x534e4554, "80261585"); |
| LOG(ERROR) << "invalid read"; |
| return; |
| } |
| |
| STREAM_TO_UINT16(min_interval, p); /* 0x0006 - 0x0C80 */ |
| STREAM_TO_UINT16(max_interval, p); /* 0x0006 - 0x0C80 */ |
| STREAM_TO_UINT16(latency, p); /* 0x0000 - 0x03E8 */ |
| STREAM_TO_UINT16(timeout, p); /* 0x000A - 0x0C80 */ |
| /* If we are a central, the peripheral wants to update the parameters */ |
| if (p_lcb->IsLinkRoleCentral()) { |
| L2CA_AdjustConnectionIntervals(&min_interval, &max_interval, |
| BTM_BLE_CONN_INT_MIN_LIMIT); |
| |
| if (min_interval < BTM_BLE_CONN_INT_MIN || |
| min_interval > BTM_BLE_CONN_INT_MAX || |
| max_interval < BTM_BLE_CONN_INT_MIN || |
| max_interval > BTM_BLE_CONN_INT_MAX || |
| latency > BTM_BLE_CONN_LATENCY_MAX || |
| /*(timeout >= max_interval && latency > (timeout * 10/(max_interval |
| * 1.25) - 1)) ||*/ |
| timeout < BTM_BLE_CONN_SUP_TOUT_MIN || |
| timeout > BTM_BLE_CONN_SUP_TOUT_MAX || |
| max_interval < min_interval) { |
| l2cu_send_peer_ble_par_rsp(p_lcb, L2CAP_CFG_UNACCEPTABLE_PARAMS, id); |
| } else { |
| l2cu_send_peer_ble_par_rsp(p_lcb, L2CAP_CFG_OK, id); |
| |
| p_lcb->min_interval = min_interval; |
| p_lcb->max_interval = max_interval; |
| p_lcb->latency = latency; |
| p_lcb->timeout = timeout; |
| p_lcb->conn_update_mask |= L2C_BLE_NEW_CONN_PARAM; |
| |
| l2cble_start_conn_update(p_lcb); |
| } |
| } else |
| l2cu_send_peer_cmd_reject(p_lcb, L2CAP_CMD_REJ_NOT_UNDERSTOOD, id, 0, |
| 0); |
| break; |
| |
| case L2CAP_CMD_BLE_UPDATE_RSP: |
| p += 2; |
| break; |
| |
| case L2CAP_CMD_CREDIT_BASED_CONN_REQ: { |
| if (p + 10 > p_pkt_end) { |
| LOG(ERROR) << "invalid L2CAP_CMD_CREDIT_BASED_CONN_REQ len"; |
| return; |
| } |
| |
| STREAM_TO_UINT16(con_info.psm, p); |
| STREAM_TO_UINT16(mtu, p); |
| STREAM_TO_UINT16(mps, p); |
| STREAM_TO_UINT16(initial_credit, p); |
| |
| /* Check how many channels remote side wants. */ |
| num_of_channels = (p_pkt_end - p) / sizeof(uint16_t); |
| |
| LOG_DEBUG( |
| "Recv L2CAP_CMD_CREDIT_BASED_CONN_REQ with " |
| "mtu = %d, " |
| "mps = %d, " |
| "initial credit = %d" |
| "num_of_channels = %d", |
| mtu, mps, initial_credit, num_of_channels); |
| |
| if (p_lcb->pending_ecoc_conn_cnt > 0) { |
| LOG_WARN("L2CAP - L2CAP_CMD_CREDIT_BASED_CONN_REQ collision:"); |
| l2cu_reject_credit_based_conn_req(p_lcb, id, num_of_channels, |
| L2CAP_LE_RESULT_NO_RESOURCES); |
| return; |
| } |
| |
| p_lcb->pending_ecoc_conn_cnt = num_of_channels; |
| |
| /* Check PSM Support */ |
| p_rcb = l2cu_find_ble_rcb_by_psm(con_info.psm); |
| if (p_rcb == NULL) { |
| LOG_WARN("L2CAP - rcvd conn req for unknown PSM: 0x%04x", con_info.psm); |
| l2cu_reject_credit_based_conn_req(p_lcb, id, num_of_channels, |
| L2CAP_LE_RESULT_NO_PSM); |
| return; |
| } |
| |
| if (!p_rcb->api.pL2CA_CreditBasedConnectInd_Cb) { |
| LOG_WARN("L2CAP - rcvd conn req for outgoing-only connection PSM: %d", |
| con_info.psm); |
| l2cu_reject_credit_based_conn_req(p_lcb, id, num_of_channels, |
| L2CAP_CONN_NO_PSM); |
| return; |
| } |
| |
| /* validate the parameters */ |
| if (mtu < L2CAP_CREDIT_BASED_MIN_MTU || |
| mps < L2CAP_CREDIT_BASED_MIN_MPS || mps > L2CAP_LE_MAX_MPS) { |
| LOG_ERROR("L2CAP don't like the params"); |
| l2cu_reject_credit_based_conn_req(p_lcb, id, num_of_channels, |
| L2CAP_LE_RESULT_INVALID_PARAMETERS); |
| return; |
| } |
| |
| bool lead_cid_set = false; |
| |
| for (int i = 0; i < num_of_channels; i++) { |
| STREAM_TO_UINT16(rcid, p); |
| temp_p_ccb = l2cu_find_ccb_by_remote_cid(p_lcb, rcid); |
| if (temp_p_ccb) { |
| LOG_WARN("L2CAP - rcvd conn req for duplicated cid: 0x%04x", rcid); |
| p_lcb->pending_ecoc_connection_cids[i] = 0; |
| p_lcb->pending_l2cap_result = |
| L2CAP_LE_RESULT_SOURCE_CID_ALREADY_ALLOCATED; |
| } else { |
| /* Allocate a ccb for this.*/ |
| temp_p_ccb = l2cu_allocate_ccb(p_lcb, 0); |
| if (temp_p_ccb == NULL) { |
| LOG_ERROR("L2CAP - unable to allocate CCB"); |
| p_lcb->pending_ecoc_connection_cids[i] = 0; |
| p_lcb->pending_l2cap_result = L2CAP_LE_RESULT_NO_RESOURCES; |
| continue; |
| } |
| |
| temp_p_ccb->ecoc = true; |
| temp_p_ccb->remote_id = id; |
| temp_p_ccb->p_rcb = p_rcb; |
| temp_p_ccb->remote_cid = rcid; |
| |
| temp_p_ccb->peer_conn_cfg.mtu = mtu; |
| temp_p_ccb->peer_conn_cfg.mps = mps; |
| temp_p_ccb->peer_conn_cfg.credits = initial_credit; |
| |
| temp_p_ccb->tx_mps = mps; |
| temp_p_ccb->ble_sdu = NULL; |
| temp_p_ccb->ble_sdu_length = 0; |
| temp_p_ccb->is_first_seg = true; |
| temp_p_ccb->peer_cfg.fcr.mode = L2CAP_FCR_LE_COC_MODE; |
| |
| /* This list will be used to prepare response */ |
| p_lcb->pending_ecoc_connection_cids[i] = temp_p_ccb->local_cid; |
| |
| /*This is going to be our lead p_ccb for state machine */ |
| if (!lead_cid_set) { |
| p_ccb = temp_p_ccb; |
| p_ccb->local_conn_cfg.mtu = L2CAP_SDU_LENGTH_LE_MAX; |
| p_ccb->local_conn_cfg.mps = |
| controller_get_interface()->get_acl_data_size_ble(); |
| p_lcb->pending_lead_cid = p_ccb->local_cid; |
| lead_cid_set = true; |
| } |
| } |
| } |
| |
| if (!lead_cid_set) { |
| LOG_ERROR("L2CAP - unable to allocate CCB"); |
| l2cu_reject_credit_based_conn_req(p_lcb, id, num_of_channels, |
| p_lcb->pending_l2cap_result); |
| return; |
| } |
| |
| LOG_DEBUG("L2CAP - processing peer credit based connect request"); |
| l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CREDIT_BASED_CONNECT_REQ, NULL); |
| break; |
| } |
| case L2CAP_CMD_CREDIT_BASED_CONN_RES: |
| if (p + 8 > p_pkt_end) { |
| LOG(ERROR) << "invalid L2CAP_CMD_CREDIT_BASED_CONN_RES len"; |
| return; |
| } |
| |
| L2CAP_TRACE_DEBUG("Recv L2CAP_CMD_CREDIT_BASED_CONN_RES"); |
| /* For all channels, see whose identifier matches this id */ |
| for (temp_p_ccb = p_lcb->ccb_queue.p_first_ccb; temp_p_ccb; |
| temp_p_ccb = temp_p_ccb->p_next_ccb) { |
| if (temp_p_ccb->local_id == id) { |
| p_ccb = temp_p_ccb; |
| break; |
| } |
| } |
| |
| if (!p_ccb) { |
| L2CAP_TRACE_DEBUG(" Cannot find matching connection req"); |
| con_info.l2cap_result = L2CAP_LE_RESULT_INVALID_SOURCE_CID; |
| l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CONNECT_RSP_NEG, &con_info); |
| return; |
| } |
| |
| STREAM_TO_UINT16(mtu, p); |
| STREAM_TO_UINT16(mps, p); |
| STREAM_TO_UINT16(initial_credit, p); |
| STREAM_TO_UINT16(con_info.l2cap_result, p); |
| |
| /* When one of these result is sent back that means, |
| * all the channels has been rejected |
| */ |
| if (con_info.l2cap_result == L2CAP_LE_RESULT_NO_PSM || |
| con_info.l2cap_result == |
| L2CAP_LE_RESULT_INSUFFICIENT_AUTHENTICATION || |
| con_info.l2cap_result == L2CAP_LE_RESULT_INSUFFICIENT_ENCRYP || |
| con_info.l2cap_result == L2CAP_LE_RESULT_INSUFFICIENT_AUTHORIZATION || |
| con_info.l2cap_result == L2CAP_LE_RESULT_UNACCEPTABLE_PARAMETERS || |
| con_info.l2cap_result == L2CAP_LE_RESULT_INVALID_PARAMETERS) { |
| l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CREDIT_BASED_CONNECT_RSP_NEG, |
| &con_info); |
| return; |
| } |
| |
| /* validate the parameters */ |
| if (mtu < L2CAP_CREDIT_BASED_MIN_MTU || |
| mps < L2CAP_CREDIT_BASED_MIN_MPS || mps > L2CAP_LE_MAX_MPS) { |
| L2CAP_TRACE_ERROR("L2CAP - invalid params"); |
| con_info.l2cap_result = L2CAP_LE_RESULT_INVALID_PARAMETERS; |
| l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CREDIT_BASED_CONNECT_RSP_NEG, |
| &con_info); |
| break; |
| } |
| |
| /* At least some of the channels has been created and parameters are |
| * good*/ |
| num_of_channels = (p_pkt_end - p) / sizeof(uint16_t); |
| if (num_of_channels != p_lcb->pending_ecoc_conn_cnt) { |
| L2CAP_TRACE_ERROR( |
| "Incorrect response." |
| "expected num of channels = %d", |
| "received num of channels = %d", num_of_channels, |
| p_lcb->pending_ecoc_conn_cnt); |
| return; |
| } |
| |
| L2CAP_TRACE_DEBUG( |
| "mtu = %d, " |
| "mps = %d, " |
| "initial_credit = %d, " |
| "con_info.l2cap_result = %d" |
| "num_of_channels = %d", |
| mtu, mps, initial_credit, con_info.l2cap_result, num_of_channels); |
| |
| con_info.peer_mtu = mtu; |
| |
| for (int i = 0; i < p_lcb->pending_ecoc_conn_cnt; i++) { |
| uint16_t cid = p_lcb->pending_ecoc_connection_cids[i]; |
| temp_p_ccb = l2cu_find_ccb_by_cid(p_lcb, cid); |
| STREAM_TO_UINT16(temp_p_ccb->remote_cid, p); |
| |
| L2CAP_TRACE_DEBUG( |
| "local cid = %d " |
| "remote cid = %d", |
| cid, temp_p_ccb->remote_cid); |
| |
| /* Check if peer accepted channel, if not release the one not |
| * created |
| */ |
| if (temp_p_ccb->remote_cid == 0) { |
| l2c_csm_execute(temp_p_ccb, L2CEVT_L2CAP_CREDIT_BASED_CONNECT_RSP_NEG, |
| &con_info); |
| } else { |
| temp_p_ccb->tx_mps = mps; |
| temp_p_ccb->ble_sdu = NULL; |
| temp_p_ccb->ble_sdu_length = 0; |
| temp_p_ccb->is_first_seg = true; |
| temp_p_ccb->peer_cfg.fcr.mode = L2CAP_FCR_LE_COC_MODE; |
| temp_p_ccb->peer_conn_cfg.mtu = mtu; |
| temp_p_ccb->peer_conn_cfg.mps = mps; |
| temp_p_ccb->peer_conn_cfg.credits = initial_credit; |
| |
| l2c_csm_execute(temp_p_ccb, L2CEVT_L2CAP_CREDIT_BASED_CONNECT_RSP, |
| &con_info); |
| } |
| } |
| |
| p_lcb->pending_ecoc_conn_cnt = 0; |
| memset(p_lcb->pending_ecoc_connection_cids, 0, |
| L2CAP_CREDIT_BASED_MAX_CIDS); |
| |
| break; |
| case L2CAP_CMD_CREDIT_BASED_RECONFIG_REQ: { |
| if (p + 6 > p_pkt_end) { |
| l2cu_send_ble_reconfig_rsp(p_lcb, id, L2CAP_RECONFIG_UNACCAPTED_PARAM); |
| return; |
| } |
| |
| STREAM_TO_UINT16(mtu, p); |
| STREAM_TO_UINT16(mps, p); |
| |
| /* validate the parameters */ |
| if (mtu < L2CAP_CREDIT_BASED_MIN_MTU || |
| mps < L2CAP_CREDIT_BASED_MIN_MPS || mps > L2CAP_LE_MAX_MPS) { |
| L2CAP_TRACE_ERROR("L2CAP - invalid params"); |
| l2cu_send_ble_reconfig_rsp(p_lcb, id, L2CAP_RECONFIG_UNACCAPTED_PARAM); |
| return; |
| } |
| |
| /* Check how many channels remote side wants to reconfigure */ |
| num_of_channels = (p_pkt_end - p) / sizeof(uint16_t); |
| |
| L2CAP_TRACE_DEBUG( |
| "Recv L2CAP_CMD_CREDIT_BASED_RECONFIG_REQ with " |
| "mtu = %d, " |
| "mps = %d, " |
| "num_of_channels = %d", |
| mtu, mps, num_of_channels); |
| |
| uint8_t* p_tmp = p; |
| for (int i = 0; i < num_of_channels; i++) { |
| STREAM_TO_UINT16(rcid, p_tmp); |
| p_ccb = l2cu_find_ccb_by_remote_cid(p_lcb, rcid); |
| if (!p_ccb) { |
| L2CAP_TRACE_WARNING( |
| "L2CAP - rcvd config req for non existing cid: 0x%04x", rcid); |
| l2cu_send_ble_reconfig_rsp(p_lcb, id, L2CAP_RECONFIG_INVALID_DCID); |
| return; |
| } |
| |
| if (p_ccb->peer_conn_cfg.mtu > mtu) { |
| L2CAP_TRACE_WARNING( |
| "L2CAP - rcvd config req mtu reduction new mtu < mtu (%d < %d)", |
| mtu, p_ccb->peer_conn_cfg.mtu); |
| l2cu_send_ble_reconfig_rsp(p_lcb, id, |
| L2CAP_RECONFIG_REDUCTION_MTU_NO_ALLOWED); |
| return; |
| } |
| |
| if (p_ccb->peer_conn_cfg.mps > mps) { |
| L2CAP_TRACE_WARNING( |
| "L2CAP - rcvd config req mps reduction new mps < mps (%d < %d)", |
| mtu, p_ccb->peer_conn_cfg.mtu); |
| l2cu_send_ble_reconfig_rsp(p_lcb, id, |
| L2CAP_RECONFIG_REDUCTION_MPS_NO_ALLOWED); |
| return; |
| } |
| } |
| |
| for (int i = 0; i < num_of_channels; i++) { |
| STREAM_TO_UINT16(rcid, p); |
| |
| /* Store new values */ |
| p_ccb = l2cu_find_ccb_by_remote_cid(p_lcb, rcid); |
| p_ccb->peer_conn_cfg.mtu = mtu; |
| p_ccb->peer_conn_cfg.mps = mps; |
| p_ccb->tx_mps = mps; |
| |
| tL2CAP_LE_CFG_INFO le_cfg; |
| le_cfg.mps = mps; |
| le_cfg.mtu = mtu; |
| |
| l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CREDIT_BASED_RECONFIG_REQ, &le_cfg); |
| } |
| |
| l2cu_send_ble_reconfig_rsp(p_lcb, id, L2CAP_RECONFIG_SUCCEED); |
| |
| break; |
| } |
| |
| case L2CAP_CMD_CREDIT_BASED_RECONFIG_RES: { |
| uint16_t result; |
| if (p + sizeof(uint16_t) > p_pkt_end) { |
| android_errorWriteLog(0x534e4554, "212694559"); |
| LOG(ERROR) << "invalid read"; |
| return; |
| } |
| STREAM_TO_UINT16(result, p); |
| |
| L2CAP_TRACE_DEBUG( |
| "Recv L2CAP_CMD_CREDIT_BASED_RECONFIG_RES for " |
| "result = 0x%04x", |
| result); |
| |
| p_lcb->pending_ecoc_reconfig_cfg.result = result; |
| |
| /* All channels which are in reconfiguration state are marked with |
| * reconfig_started flag. Find it and send response |
| */ |
| for (temp_p_ccb = p_lcb->ccb_queue.p_first_ccb; temp_p_ccb; |
| temp_p_ccb = temp_p_ccb->p_next_ccb) { |
| if ((temp_p_ccb->in_use) && (temp_p_ccb->reconfig_started)) { |
| l2c_csm_execute(temp_p_ccb, L2CEVT_L2CAP_CREDIT_BASED_RECONFIG_RSP, |
| &p_lcb->pending_ecoc_reconfig_cfg); |
| |
| temp_p_ccb->reconfig_started = false; |
| if (result == L2CAP_CFG_OK) { |
| temp_p_ccb->local_conn_cfg = p_lcb->pending_ecoc_reconfig_cfg; |
| } |
| } |
| } |
| |
| break; |
| } |
| |
| case L2CAP_CMD_BLE_CREDIT_BASED_CONN_REQ: |
| if (p + 10 > p_pkt_end) { |
| android_errorWriteLog(0x534e4554, "80261585"); |
| LOG(ERROR) << "invalid read"; |
| return; |
| } |
| |
| STREAM_TO_UINT16(con_info.psm, p); |
| STREAM_TO_UINT16(rcid, p); |
| STREAM_TO_UINT16(mtu, p); |
| STREAM_TO_UINT16(mps, p); |
| STREAM_TO_UINT16(initial_credit, p); |
| |
| L2CAP_TRACE_DEBUG( |
| "Recv L2CAP_CMD_BLE_CREDIT_BASED_CONN_REQ with " |
| "mtu = %d, " |
| "mps = %d, " |
| "initial credit = %d", |
| mtu, mps, initial_credit); |
| |
| p_ccb = l2cu_find_ccb_by_remote_cid(p_lcb, rcid); |
| if (p_ccb) { |
| L2CAP_TRACE_WARNING("L2CAP - rcvd conn req for duplicated cid: 0x%04x", |
| rcid); |
| l2cu_reject_ble_coc_connection( |
| p_lcb, id, L2CAP_LE_RESULT_SOURCE_CID_ALREADY_ALLOCATED); |
| break; |
| } |
| |
| p_rcb = l2cu_find_ble_rcb_by_psm(con_info.psm); |
| if (p_rcb == NULL) { |
| L2CAP_TRACE_WARNING("L2CAP - rcvd conn req for unknown PSM: 0x%04x", |
| con_info.psm); |
| l2cu_reject_ble_coc_connection(p_lcb, id, L2CAP_LE_RESULT_NO_PSM); |
| break; |
| } else { |
| if (!p_rcb->api.pL2CA_ConnectInd_Cb) { |
| L2CAP_TRACE_WARNING( |
| "L2CAP - rcvd conn req for outgoing-only connection PSM: %d", |
| con_info.psm); |
| l2cu_reject_ble_coc_connection(p_lcb, id, L2CAP_CONN_NO_PSM); |
| break; |
| } |
| } |
| |
| /* Allocate a ccb for this.*/ |
| p_ccb = l2cu_allocate_ccb(p_lcb, 0); |
| if (p_ccb == NULL) { |
| L2CAP_TRACE_ERROR("L2CAP - unable to allocate CCB"); |
| l2cu_reject_ble_connection(p_ccb, id, L2CAP_CONN_NO_RESOURCES); |
| break; |
| } |
| |
| /* validate the parameters */ |
| if (mtu < L2CAP_LE_MIN_MTU || mps < L2CAP_LE_MIN_MPS || |
| mps > L2CAP_LE_MAX_MPS) { |
| L2CAP_TRACE_ERROR("L2CAP do not like the params"); |
| l2cu_reject_ble_connection(p_ccb, id, L2CAP_CONN_NO_RESOURCES); |
| break; |
| } |
| |
| p_ccb->remote_id = id; |
| p_ccb->p_rcb = p_rcb; |
| p_ccb->remote_cid = rcid; |
| |
| p_ccb->local_conn_cfg.mtu = L2CAP_SDU_LENGTH_LE_MAX; |
| p_ccb->local_conn_cfg.mps = |
| controller_get_interface()->get_acl_data_size_ble(); |
| p_ccb->local_conn_cfg.credits = L2CAP_LE_CREDIT_DEFAULT, |
| |
| p_ccb->peer_conn_cfg.mtu = mtu; |
| p_ccb->peer_conn_cfg.mps = mps; |
| p_ccb->peer_conn_cfg.credits = initial_credit; |
| |
| p_ccb->tx_mps = mps; |
| p_ccb->ble_sdu = NULL; |
| p_ccb->ble_sdu_length = 0; |
| p_ccb->is_first_seg = true; |
| p_ccb->peer_cfg.fcr.mode = L2CAP_FCR_LE_COC_MODE; |
| |
| p_ccb->connection_initiator = L2CAP_INITIATOR_REMOTE; |
| |
| l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CONNECT_REQ, &con_info); |
| break; |
| |
| case L2CAP_CMD_BLE_CREDIT_BASED_CONN_RES: |
| L2CAP_TRACE_DEBUG("Recv L2CAP_CMD_BLE_CREDIT_BASED_CONN_RES"); |
| /* For all channels, see whose identifier matches this id */ |
| for (temp_p_ccb = p_lcb->ccb_queue.p_first_ccb; temp_p_ccb; |
| temp_p_ccb = temp_p_ccb->p_next_ccb) { |
| if (temp_p_ccb->local_id == id) { |
| p_ccb = temp_p_ccb; |
| break; |
| } |
| } |
| if (p_ccb) { |
| L2CAP_TRACE_DEBUG("I remember the connection req"); |
| if (p + 10 > p_pkt_end) { |
| android_errorWriteLog(0x534e4554, "80261585"); |
| LOG(ERROR) << "invalid read"; |
| return; |
| } |
| |
| STREAM_TO_UINT16(p_ccb->remote_cid, p); |
| STREAM_TO_UINT16(p_ccb->peer_conn_cfg.mtu, p); |
| STREAM_TO_UINT16(p_ccb->peer_conn_cfg.mps, p); |
| STREAM_TO_UINT16(p_ccb->peer_conn_cfg.credits, p); |
| STREAM_TO_UINT16(con_info.l2cap_result, p); |
| con_info.remote_cid = p_ccb->remote_cid; |
| |
| L2CAP_TRACE_DEBUG( |
| "remote_cid = %d, " |
| "mtu = %d, " |
| "mps = %d, " |
| "initial_credit = %d, " |
| "con_info.l2cap_result = %d", |
| p_ccb->remote_cid, p_ccb->peer_conn_cfg.mtu, |
| p_ccb->peer_conn_cfg.mps, p_ccb->peer_conn_cfg.credits, |
| con_info.l2cap_result); |
| |
| /* validate the parameters */ |
| if (p_ccb->peer_conn_cfg.mtu < L2CAP_LE_MIN_MTU || |
| p_ccb->peer_conn_cfg.mps < L2CAP_LE_MIN_MPS || |
| p_ccb->peer_conn_cfg.mps > L2CAP_LE_MAX_MPS) { |
| L2CAP_TRACE_ERROR("L2CAP do not like the params"); |
| con_info.l2cap_result = L2CAP_LE_RESULT_NO_RESOURCES; |
| l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CONNECT_RSP_NEG, &con_info); |
| break; |
| } |
| |
| p_ccb->tx_mps = p_ccb->peer_conn_cfg.mps; |
| p_ccb->ble_sdu = NULL; |
| p_ccb->ble_sdu_length = 0; |
| p_ccb->is_first_seg = true; |
| p_ccb->peer_cfg.fcr.mode = L2CAP_FCR_LE_COC_MODE; |
| |
| if (con_info.l2cap_result == L2CAP_LE_RESULT_CONN_OK) |
| l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CONNECT_RSP, &con_info); |
| else |
| l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CONNECT_RSP_NEG, &con_info); |
| } else { |
| L2CAP_TRACE_DEBUG("I DO NOT remember the connection req"); |
| con_info.l2cap_result = L2CAP_LE_RESULT_INVALID_SOURCE_CID; |
| l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CONNECT_RSP_NEG, &con_info); |
| } |
| break; |
| |
| case L2CAP_CMD_BLE_FLOW_CTRL_CREDIT: |
| if (p + 4 > p_pkt_end) { |
| android_errorWriteLog(0x534e4554, "80261585"); |
| LOG(ERROR) << "invalid read"; |
| return; |
| } |
| |
| STREAM_TO_UINT16(lcid, p); |
| p_ccb = l2cu_find_ccb_by_remote_cid(p_lcb, lcid); |
| if (p_ccb == NULL) { |
| L2CAP_TRACE_DEBUG("%s Credit received for unknown channel id %d", |
| __func__, lcid); |
| break; |
| } |
| |
| STREAM_TO_UINT16(credit, p); |
| l2c_csm_execute(p_ccb, L2CEVT_L2CAP_RECV_FLOW_CONTROL_CREDIT, &credit); |
| L2CAP_TRACE_DEBUG("%s Credit received", __func__); |
| break; |
| |
| case L2CAP_CMD_DISC_REQ: |
| if (p + 4 > p_pkt_end) { |
| android_errorWriteLog(0x534e4554, "74121659"); |
| return; |
| } |
| STREAM_TO_UINT16(lcid, p); |
| STREAM_TO_UINT16(rcid, p); |
| |
| p_ccb = l2cu_find_ccb_by_cid(p_lcb, lcid); |
| if (p_ccb != NULL) { |
| if (p_ccb->remote_cid == rcid) { |
| p_ccb->remote_id = id; |
| l2c_csm_execute(p_ccb, L2CEVT_L2CAP_DISCONNECT_REQ, NULL); |
| } |
| } else |
| l2cu_send_peer_disc_rsp(p_lcb, id, lcid, rcid); |
| |
| break; |
| |
| case L2CAP_CMD_DISC_RSP: |
| if (p + 4 > p_pkt_end) { |
| android_errorWriteLog(0x534e4554, "80261585"); |
| LOG(ERROR) << "invalid read"; |
| return; |
| } |
| STREAM_TO_UINT16(rcid, p); |
| STREAM_TO_UINT16(lcid, p); |
| |
| p_ccb = l2cu_find_ccb_by_cid(p_lcb, lcid); |
| if (p_ccb != NULL) { |
| if ((p_ccb->remote_cid == rcid) && (p_ccb->local_id == id)) |
| l2c_csm_execute(p_ccb, L2CEVT_L2CAP_DISCONNECT_RSP, NULL); |
| } |
| break; |
| |
| default: |
| L2CAP_TRACE_WARNING("L2CAP - LE - unknown cmd code: %d", cmd_code); |
| l2cu_send_peer_cmd_reject(p_lcb, L2CAP_CMD_REJ_NOT_UNDERSTOOD, id, 0, 0); |
| break; |
| } |
| } |
| |
| /** This function is to initate a direct connection. Returns true if connection |
| * initiated, false otherwise. */ |
| bool l2cble_create_conn(tL2C_LCB* p_lcb) { |
| if (!acl_create_le_connection(p_lcb->remote_bd_addr)) { |
| return false; |
| } |
| |
| p_lcb->link_state = LST_CONNECTING; |
| |
| // TODO: we should not need this timer at all, the connection failure should |
| // be reported from lower layer |
| alarm_set_on_mloop(p_lcb->l2c_lcb_timer, L2CAP_BLE_LINK_CONNECT_TIMEOUT_MS, |
| l2c_lcb_timer_timeout, p_lcb); |
| return true; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function l2c_link_processs_ble_num_bufs |
| * |
| * Description This function is called when a "controller buffer size" |
| * event is first received from the controller. It updates |
| * the L2CAP values. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void l2c_link_processs_ble_num_bufs(uint16_t num_lm_ble_bufs) { |
| if (bluetooth::shim::is_gd_l2cap_enabled()) { |
| return; |
| } |
| |
| if (num_lm_ble_bufs == 0) { |
| num_lm_ble_bufs = L2C_DEF_NUM_BLE_BUF_SHARED; |
| l2cb.num_lm_acl_bufs -= L2C_DEF_NUM_BLE_BUF_SHARED; |
| } |
| |
| l2cb.num_lm_ble_bufs = num_lm_ble_bufs; |
| l2cb.controller_le_xmit_window = num_lm_ble_bufs; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function l2c_ble_link_adjust_allocation |
| * |
| * Description This function is called when a link is created or removed |
| * to calculate the amount of packets each link may send to |
| * the HCI without an ack coming back. |
| * |
| * Currently, this is a simple allocation, dividing the |
| * number of Controller Packets by the number of links. In |
| * the future, QOS configuration should be examined. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void l2c_ble_link_adjust_allocation(void) { |
| uint16_t qq, yy, qq_remainder; |
| tL2C_LCB* p_lcb; |
| uint16_t hi_quota, low_quota; |
| uint16_t num_lowpri_links = 0; |
| uint16_t num_hipri_links = 0; |
| uint16_t controller_xmit_quota = l2cb.num_lm_ble_bufs; |
| uint16_t high_pri_link_quota = L2CAP_HIGH_PRI_MIN_XMIT_QUOTA_A; |
| |
| /* If no links active, reset buffer quotas and controller buffers */ |
| if (l2cb.num_ble_links_active == 0) { |
| l2cb.controller_le_xmit_window = l2cb.num_lm_ble_bufs; |
| l2cb.ble_round_robin_quota = l2cb.ble_round_robin_unacked = 0; |
| return; |
| } |
| |
| /* First, count the links */ |
| for (yy = 0, p_lcb = &l2cb.lcb_pool[0]; yy < MAX_L2CAP_LINKS; yy++, p_lcb++) { |
| if (p_lcb->in_use && p_lcb->transport == BT_TRANSPORT_LE) { |
| if (p_lcb->acl_priority == L2CAP_PRIORITY_HIGH) |
| num_hipri_links++; |
| else |
| num_lowpri_links++; |
| } |
| } |
| |
| /* now adjust high priority link quota */ |
| low_quota = num_lowpri_links ? 1 : 0; |
| while ((num_hipri_links * high_pri_link_quota + low_quota) > |
| controller_xmit_quota) |
| high_pri_link_quota--; |
| |
| /* Work out the xmit quota and buffer quota high and low priorities */ |
| hi_quota = num_hipri_links * high_pri_link_quota; |
| low_quota = |
| (hi_quota < controller_xmit_quota) ? controller_xmit_quota - hi_quota : 1; |
| |
| /* Work out and save the HCI xmit quota for each low priority link */ |
| |
| /* If each low priority link cannot have at least one buffer */ |
| if (num_lowpri_links > low_quota) { |
| l2cb.ble_round_robin_quota = low_quota; |
| qq = qq_remainder = 0; |
| } |
| /* If each low priority link can have at least one buffer */ |
| else if (num_lowpri_links > 0) { |
| l2cb.ble_round_robin_quota = 0; |
| l2cb.ble_round_robin_unacked = 0; |
| qq = low_quota / num_lowpri_links; |
| qq_remainder = low_quota % num_lowpri_links; |
| } |
| /* If no low priority link */ |
| else { |
| l2cb.ble_round_robin_quota = 0; |
| l2cb.ble_round_robin_unacked = 0; |
| qq = qq_remainder = 0; |
| } |
| L2CAP_TRACE_EVENT( |
| "l2c_ble_link_adjust_allocation num_hipri: %u num_lowpri: %u " |
| "low_quota: %u round_robin_quota: %u qq: %u", |
| num_hipri_links, num_lowpri_links, low_quota, l2cb.ble_round_robin_quota, |
| qq); |
| |
| /* Now, assign the quotas to each link */ |
| for (yy = 0, p_lcb = &l2cb.lcb_pool[0]; yy < MAX_L2CAP_LINKS; yy++, p_lcb++) { |
| if (p_lcb->in_use && p_lcb->transport == BT_TRANSPORT_LE) { |
| if (p_lcb->acl_priority == L2CAP_PRIORITY_HIGH) { |
| p_lcb->link_xmit_quota = high_pri_link_quota; |
| } else { |
| /* Safety check in case we switched to round-robin with something |
| * outstanding */ |
| /* if sent_not_acked is added into round_robin_unacked then do not add |
| * it again */ |
| /* l2cap keeps updating sent_not_acked for exiting from round robin */ |
| if ((p_lcb->link_xmit_quota > 0) && (qq == 0)) |
| l2cb.ble_round_robin_unacked += p_lcb->sent_not_acked; |
| |
| p_lcb->link_xmit_quota = qq; |
| if (qq_remainder > 0) { |
| p_lcb->link_xmit_quota++; |
| qq_remainder--; |
| } |
| } |
| |
| L2CAP_TRACE_EVENT( |
| "l2c_ble_link_adjust_allocation LCB %d Priority: %d XmitQuota: %d", |
| yy, p_lcb->acl_priority, p_lcb->link_xmit_quota); |
| |
| L2CAP_TRACE_EVENT(" SentNotAcked: %d RRUnacked: %d", |
| p_lcb->sent_not_acked, l2cb.round_robin_unacked); |
| |
| /* There is a special case where we have readjusted the link quotas and */ |
| /* this link may have sent anything but some other link sent packets so */ |
| /* so we may need a timer to kick off this link's transmissions. */ |
| if ((p_lcb->link_state == LST_CONNECTED) && |
| (!list_is_empty(p_lcb->link_xmit_data_q)) && |
| (p_lcb->sent_not_acked < p_lcb->link_xmit_quota)) { |
| alarm_set_on_mloop(p_lcb->l2c_lcb_timer, |
| L2CAP_LINK_FLOW_CONTROL_TIMEOUT_MS, |
| l2c_lcb_timer_timeout, p_lcb); |
| } |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function l2cble_process_rc_param_request_evt |
| * |
| * Description process LE Remote Connection Parameter Request Event. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void l2cble_process_rc_param_request_evt(uint16_t handle, uint16_t int_min, |
| uint16_t int_max, uint16_t latency, |
| uint16_t timeout) { |
| tL2C_LCB* p_lcb = l2cu_find_lcb_by_handle(handle); |
| |
| if (p_lcb != NULL) { |
| p_lcb->min_interval = int_min; |
| p_lcb->max_interval = int_max; |
| p_lcb->latency = latency; |
| p_lcb->timeout = timeout; |
| |
| /* if update is enabled, always accept connection parameter update */ |
| if ((p_lcb->conn_update_mask & L2C_BLE_CONN_UPDATE_DISABLE) == 0) { |
| btsnd_hcic_ble_rc_param_req_reply(handle, int_min, int_max, latency, |
| timeout, 0, 0); |
| } else { |
| L2CAP_TRACE_EVENT("L2CAP - LE - update currently disabled"); |
| p_lcb->conn_update_mask |= L2C_BLE_NEW_CONN_PARAM; |
| btsnd_hcic_ble_rc_param_req_neg_reply(handle, |
| HCI_ERR_UNACCEPT_CONN_INTERVAL); |
| } |
| |
| } else { |
| L2CAP_TRACE_WARNING("No link to update connection parameter") |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function l2cble_update_data_length |
| * |
| * Description This function update link tx data length if applicable |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void l2cble_update_data_length(tL2C_LCB* p_lcb) { |
| uint16_t tx_mtu = 0; |
| uint16_t i = 0; |
| |
| L2CAP_TRACE_DEBUG("%s", __func__); |
| |
| /* See if we have a link control block for the connection */ |
| if (p_lcb == NULL) return; |
| |
| for (i = 0; i < L2CAP_NUM_FIXED_CHNLS; i++) { |
| if (i + L2CAP_FIRST_FIXED_CHNL != L2CAP_BLE_SIGNALLING_CID) { |
| if ((p_lcb->p_fixed_ccbs[i] != NULL) && |
| (tx_mtu < (p_lcb->p_fixed_ccbs[i]->tx_data_len + L2CAP_PKT_OVERHEAD))) |
| tx_mtu = p_lcb->p_fixed_ccbs[i]->tx_data_len + L2CAP_PKT_OVERHEAD; |
| } |
| } |
| |
| if (tx_mtu > BTM_BLE_DATA_SIZE_MAX) tx_mtu = BTM_BLE_DATA_SIZE_MAX; |
| |
| /* update TX data length if changed */ |
| if (p_lcb->tx_data_len != tx_mtu) |
| BTM_SetBleDataLength(p_lcb->remote_bd_addr, tx_mtu); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function l2cble_process_data_length_change_evt |
| * |
| * Description This function process the data length change event |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void l2cble_process_data_length_change_event(uint16_t handle, |
| uint16_t tx_data_len, |
| uint16_t rx_data_len) { |
| tL2C_LCB* p_lcb = l2cu_find_lcb_by_handle(handle); |
| |
| L2CAP_TRACE_DEBUG("%s TX data len = %d", __func__, tx_data_len); |
| if (p_lcb == NULL) return; |
| |
| if (tx_data_len > 0) p_lcb->tx_data_len = tx_data_len; |
| |
| /* ignore rx_data len for now */ |
| } |
| |
| /******************************************************************************* |
| * |
| * Function l2cble_credit_based_conn_req |
| * |
| * Description This function sends LE Credit Based Connection Request for |
| * LE connection oriented channels. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void l2cble_credit_based_conn_req(tL2C_CCB* p_ccb) { |
| if (!p_ccb) return; |
| |
| if (p_ccb->p_lcb && p_ccb->p_lcb->transport != BT_TRANSPORT_LE) { |
| L2CAP_TRACE_WARNING("LE link doesn't exist"); |
| return; |
| } |
| |
| if (p_ccb->ecoc) { |
| l2cu_send_peer_credit_based_conn_req(p_ccb); |
| } else { |
| l2cu_send_peer_ble_credit_based_conn_req(p_ccb); |
| } |
| return; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function l2cble_credit_based_conn_res |
| * |
| * Description This function sends LE Credit Based Connection Response for |
| * LE connection oriented channels. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void l2cble_credit_based_conn_res(tL2C_CCB* p_ccb, uint16_t result) { |
| if (!p_ccb) return; |
| |
| if (p_ccb->p_lcb && p_ccb->p_lcb->transport != BT_TRANSPORT_LE) { |
| L2CAP_TRACE_WARNING("LE link doesn't exist"); |
| return; |
| } |
| |
| l2cu_send_peer_ble_credit_based_conn_res(p_ccb, result); |
| return; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function l2cble_send_flow_control_credit |
| * |
| * Description This function sends flow control credits for |
| * LE connection oriented channels. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void l2cble_send_flow_control_credit(tL2C_CCB* p_ccb, uint16_t credit_value) { |
| if (!p_ccb) return; |
| |
| if (p_ccb->p_lcb && p_ccb->p_lcb->transport != BT_TRANSPORT_LE) { |
| L2CAP_TRACE_WARNING("LE link doesn't exist"); |
| return; |
| } |
| |
| l2cu_send_peer_ble_flow_control_credit(p_ccb, credit_value); |
| return; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function l2cble_send_peer_disc_req |
| * |
| * Description This function sends disconnect request |
| * to the peer LE device |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void l2cble_send_peer_disc_req(tL2C_CCB* p_ccb) { |
| L2CAP_TRACE_DEBUG("%s", __func__); |
| if (!p_ccb) return; |
| |
| if (p_ccb->p_lcb && p_ccb->p_lcb->transport != BT_TRANSPORT_LE) { |
| L2CAP_TRACE_WARNING("LE link doesn't exist"); |
| return; |
| } |
| |
| l2cu_send_peer_ble_credit_based_disconn_req(p_ccb); |
| return; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function l2cble_sec_comp |
| * |
| * Description This function is called when security procedure for an LE |
| * COC link is done |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void l2cble_sec_comp(const RawAddress* bda, tBT_TRANSPORT transport, |
| void* p_ref_data, tBTM_STATUS status) { |
| const RawAddress& p_bda = *bda; |
| tL2C_LCB* p_lcb = l2cu_find_lcb_by_bd_addr(p_bda, BT_TRANSPORT_LE); |
| tL2CAP_SEC_DATA* p_buf = NULL; |
| uint8_t sec_act; |
| |
| if (!p_lcb) { |
| L2CAP_TRACE_WARNING("%s: security complete for unknown device. bda=%s", |
| __func__, bda->ToString().c_str()); |
| return; |
| } |
| |
| sec_act = p_lcb->sec_act; |
| p_lcb->sec_act = 0; |
| |
| if (!fixed_queue_is_empty(p_lcb->le_sec_pending_q)) { |
| p_buf = (tL2CAP_SEC_DATA*)fixed_queue_dequeue(p_lcb->le_sec_pending_q); |
| if (!p_buf) { |
| L2CAP_TRACE_WARNING( |
| "%s Security complete for request not initiated from L2CAP", |
| __func__); |
| return; |
| } |
| |
| if (status != BTM_SUCCESS) { |
| (*(p_buf->p_callback))(p_bda, BT_TRANSPORT_LE, p_buf->p_ref_data, status); |
| } else { |
| if (sec_act == BTM_SEC_ENCRYPT_MITM) { |
| if (BTM_IsLinkKeyAuthed(p_bda, transport)) |
| (*(p_buf->p_callback))(p_bda, BT_TRANSPORT_LE, p_buf->p_ref_data, |
| status); |
| else { |
| L2CAP_TRACE_DEBUG("%s MITM Protection Not present", __func__); |
| (*(p_buf->p_callback))(p_bda, BT_TRANSPORT_LE, p_buf->p_ref_data, |
| BTM_FAILED_ON_SECURITY); |
| } |
| } else { |
| L2CAP_TRACE_DEBUG("%s MITM Protection not required sec_act = %d", |
| __func__, p_lcb->sec_act); |
| |
| (*(p_buf->p_callback))(p_bda, BT_TRANSPORT_LE, p_buf->p_ref_data, |
| status); |
| } |
| } |
| } else { |
| L2CAP_TRACE_WARNING( |
| "%s Security complete for request not initiated from L2CAP", __func__); |
| return; |
| } |
| osi_free(p_buf); |
| |
| while (!fixed_queue_is_empty(p_lcb->le_sec_pending_q)) { |
| p_buf = (tL2CAP_SEC_DATA*)fixed_queue_dequeue(p_lcb->le_sec_pending_q); |
| |
| if (status != BTM_SUCCESS) |
| (*(p_buf->p_callback))(p_bda, BT_TRANSPORT_LE, p_buf->p_ref_data, status); |
| else |
| l2ble_sec_access_req(p_bda, p_buf->psm, p_buf->is_originator, |
| p_buf->p_callback, p_buf->p_ref_data); |
| |
| osi_free(p_buf); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function l2ble_sec_access_req |
| * |
| * Description This function is called by LE COC link to meet the |
| * security requirement for the link |
| * |
| * Returns Returns - L2CAP LE Connection Response Result Code. |
| * |
| ******************************************************************************/ |
| tL2CAP_LE_RESULT_CODE l2ble_sec_access_req(const RawAddress& bd_addr, |
| uint16_t psm, bool is_originator, |
| tL2CAP_SEC_CBACK* p_callback, |
| void* p_ref_data) { |
| tL2CAP_LE_RESULT_CODE result; |
| tL2C_LCB* p_lcb = NULL; |
| |
| if (!p_callback) { |
| LOG_ERROR("No callback function"); |
| return L2CAP_LE_RESULT_NO_RESOURCES; |
| } |
| |
| p_lcb = l2cu_find_lcb_by_bd_addr(bd_addr, BT_TRANSPORT_LE); |
| |
| if (!p_lcb) { |
| LOG_ERROR("Security check for unknown device"); |
| p_callback(bd_addr, BT_TRANSPORT_LE, p_ref_data, BTM_UNKNOWN_ADDR); |
| return L2CAP_LE_RESULT_NO_RESOURCES; |
| } |
| |
| tL2CAP_SEC_DATA* p_buf = |
| (tL2CAP_SEC_DATA*)osi_malloc((uint16_t)sizeof(tL2CAP_SEC_DATA)); |
| if (!p_buf) { |
| LOG_ERROR("No resources for connection"); |
| p_callback(bd_addr, BT_TRANSPORT_LE, p_ref_data, BTM_NO_RESOURCES); |
| return L2CAP_LE_RESULT_NO_RESOURCES; |
| } |
| |
| p_buf->psm = psm; |
| p_buf->is_originator = is_originator; |
| p_buf->p_callback = p_callback; |
| p_buf->p_ref_data = p_ref_data; |
| fixed_queue_enqueue(p_lcb->le_sec_pending_q, p_buf); |
| result = btm_ble_start_sec_check(bd_addr, psm, is_originator, |
| &l2cble_sec_comp, p_ref_data); |
| |
| return result; |
| } |
| |
| /* This function is called to adjust the connection intervals based on various |
| * constraints. For example, when there is at least one Hearing Aid device |
| * bonded, the minimum interval is raised. On return, min_interval and |
| * max_interval are updated. */ |
| void L2CA_AdjustConnectionIntervals(uint16_t* min_interval, |
| uint16_t* max_interval, |
| uint16_t floor_interval) { |
| uint16_t phone_min_interval = floor_interval; |
| |
| if (HearingAid::GetDeviceCount() > 0) { |
| // When there are bonded Hearing Aid devices, we will constrained this |
| // minimum interval. |
| phone_min_interval = BTM_BLE_CONN_INT_MIN_HEARINGAID; |
| L2CAP_TRACE_DEBUG("%s: Have Hearing Aids. Min. interval is set to %d", |
| __func__, phone_min_interval); |
| } |
| |
| if (*min_interval < phone_min_interval) { |
| L2CAP_TRACE_DEBUG("%s: requested min_interval=%d too small. Set to %d", |
| __func__, *min_interval, phone_min_interval); |
| *min_interval = phone_min_interval; |
| } |
| |
| // While this could result in connection parameters that fall |
| // outside fo the range requested, this will allow the connection |
| // to remain established. |
| // In other words, this is a workaround for certain peripherals. |
| if (*max_interval < phone_min_interval) { |
| L2CAP_TRACE_DEBUG("%s: requested max_interval=%d too small. Set to %d", |
| __func__, *max_interval, phone_min_interval); |
| *max_interval = phone_min_interval; |
| } |
| } |
| |
| void l2cble_use_preferred_conn_params(const RawAddress& bda) { |
| tL2C_LCB* p_lcb = l2cu_find_lcb_by_bd_addr(bda, BT_TRANSPORT_LE); |
| tBTM_SEC_DEV_REC* p_dev_rec = btm_find_or_alloc_dev(bda); |
| |
| /* If there are any preferred connection parameters, set them now */ |
| if ((p_lcb != NULL) && (p_dev_rec != NULL) && |
| (p_dev_rec->conn_params.min_conn_int >= BTM_BLE_CONN_INT_MIN) && |
| (p_dev_rec->conn_params.min_conn_int <= BTM_BLE_CONN_INT_MAX) && |
| (p_dev_rec->conn_params.max_conn_int >= BTM_BLE_CONN_INT_MIN) && |
| (p_dev_rec->conn_params.max_conn_int <= BTM_BLE_CONN_INT_MAX) && |
| (p_dev_rec->conn_params.peripheral_latency <= BTM_BLE_CONN_LATENCY_MAX) && |
| (p_dev_rec->conn_params.supervision_tout >= BTM_BLE_CONN_SUP_TOUT_MIN) && |
| (p_dev_rec->conn_params.supervision_tout <= BTM_BLE_CONN_SUP_TOUT_MAX) && |
| ((p_lcb->min_interval < p_dev_rec->conn_params.min_conn_int && |
| p_dev_rec->conn_params.min_conn_int != BTM_BLE_CONN_PARAM_UNDEF) || |
| (p_lcb->min_interval > p_dev_rec->conn_params.max_conn_int) || |
| (p_lcb->latency > p_dev_rec->conn_params.peripheral_latency) || |
| (p_lcb->timeout > p_dev_rec->conn_params.supervision_tout))) { |
| BTM_TRACE_DEBUG( |
| "%s: HANDLE=%d min_conn_int=%d max_conn_int=%d peripheral_latency=%d " |
| "supervision_tout=%d", |
| __func__, p_lcb->Handle(), p_dev_rec->conn_params.min_conn_int, |
| p_dev_rec->conn_params.max_conn_int, |
| p_dev_rec->conn_params.peripheral_latency, |
| p_dev_rec->conn_params.supervision_tout); |
| |
| p_lcb->min_interval = p_dev_rec->conn_params.min_conn_int; |
| p_lcb->max_interval = p_dev_rec->conn_params.max_conn_int; |
| p_lcb->timeout = p_dev_rec->conn_params.supervision_tout; |
| p_lcb->latency = p_dev_rec->conn_params.peripheral_latency; |
| |
| btsnd_hcic_ble_upd_ll_conn_params( |
| p_lcb->Handle(), p_dev_rec->conn_params.min_conn_int, |
| p_dev_rec->conn_params.max_conn_int, |
| p_dev_rec->conn_params.peripheral_latency, |
| p_dev_rec->conn_params.supervision_tout, 0, 0); |
| } |
| } |