Google Git
Sign in
android / platform / system / bt / e0dd01b536919d5407968eae341b72fa10ec0b7d / . / bta / hearing_aid / hearing_aid.cc
blob: f863d69a74ec18427af130e837beb554f6aab753 [file] [log] [blame]
/******************************************************************************
*
* Copyright 2018 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
#include "bta_hearing_aid_api.h"
#define LOG_TAG "bluetooth"
#include <base/bind.h>
#include <base/callback.h>
#include <base/strings/string_number_conversions.h> // HexEncode
#include <cstdint>
#include <vector>
#include "bta/include/bta_gatt_api.h"
#include "bta/include/bta_gatt_queue.h"
#include "bta/include/bta_hearing_aid_api.h"
#include "device/include/controller.h"
#include "embdrv/g722/g722_enc_dec.h"
#include "osi/include/log.h"
#include "osi/include/properties.h"
#include "stack/btm/btm_sec.h"
#include "stack/include/acl_api.h" // BTM_ReadRSSI
#include "stack/include/acl_api_types.h" // tBTM_RSSI_RESULT
#include "stack/include/gap_api.h"
#include "stack/include/l2c_api.h" // L2CAP_MIN_OFFSET
#include "types/bluetooth/uuid.h"
#include "types/bt_transport.h"
#include "types/raw_address.h"
using base::Closure;
using bluetooth::Uuid;
using bluetooth::hearing_aid::ConnectionState;
// The MIN_CE_LEN parameter for Connection Parameters based on the current
// Connection Interval
constexpr uint16_t MIN_CE_LEN_10MS_CI = 0x0006;
constexpr uint16_t MIN_CE_LEN_20MS_CI = 0x000C;
constexpr uint16_t CONNECTION_INTERVAL_10MS_PARAM = 0x0008;
constexpr uint16_t CONNECTION_INTERVAL_20MS_PARAM = 0x0010;
void btif_storage_add_hearing_aid(const HearingDevice& dev_info);
bool btif_storage_get_hearing_aid_prop(
const RawAddress& address, uint8_t* capabilities, uint64_t* hi_sync_id,
uint16_t* render_delay, uint16_t* preparation_delay, uint16_t* codecs);
constexpr uint8_t CODEC_G722_16KHZ = 0x01;
constexpr uint8_t CODEC_G722_24KHZ = 0x02;
// audio control point opcodes
constexpr uint8_t CONTROL_POINT_OP_START = 0x01;
constexpr uint8_t CONTROL_POINT_OP_STOP = 0x02;
constexpr uint8_t CONTROL_POINT_OP_STATE_CHANGE = 0x03;
constexpr uint8_t STATE_CHANGE_OTHER_SIDE_DISCONNECTED = 0x00;
constexpr uint8_t STATE_CHANGE_OTHER_SIDE_CONNECTED = 0x01;
constexpr uint8_t STATE_CHANGE_CONN_UPDATE = 0x02;
// used to mark current_volume as not yet known, or possibly old
constexpr int8_t VOLUME_UNKNOWN = 127;
constexpr int8_t VOLUME_MIN = -127;
// audio type
constexpr uint8_t AUDIOTYPE_UNKNOWN = 0x00;
// Status of the other side Hearing Aids device
constexpr uint8_t OTHER_SIDE_NOT_STREAMING = 0x00;
constexpr uint8_t OTHER_SIDE_IS_STREAMING = 0x01;
// This ADD_RENDER_DELAY_INTERVALS is the number of connection intervals when
// the audio data packet is send by Audio Engine to when the Hearing Aids device
// received it from the air. We assumed that there is 2 data buffer queued from
// audio subsystem to bluetooth chip. Then the estimated OTA delay is two
// connnection intervals.
constexpr uint16_t ADD_RENDER_DELAY_INTERVALS = 4;
namespace {
// clang-format off
Uuid HEARING_AID_UUID = Uuid::FromString("FDF0");
Uuid READ_ONLY_PROPERTIES_UUID = Uuid::FromString("6333651e-c481-4a3e-9169-7c902aad37bb");
Uuid AUDIO_CONTROL_POINT_UUID = Uuid::FromString("f0d4de7e-4a88-476c-9d9f-1937b0996cc0");
Uuid AUDIO_STATUS_UUID = Uuid::FromString("38663f1a-e711-4cac-b641-326b56404837");
Uuid VOLUME_UUID = Uuid::FromString("00e4ca9e-ab14-41e4-8823-f9e70c7e91df");
Uuid LE_PSM_UUID = Uuid::FromString("2d410339-82b6-42aa-b34e-e2e01df8cc1a");
// clang-format on
void hearingaid_gattc_callback(tBTA_GATTC_EVT event, tBTA_GATTC* p_data);
void encryption_callback(const RawAddress*, tBT_TRANSPORT, void*, tBTM_STATUS);
void read_rssi_cb(void* p_void);
inline BT_HDR* malloc_l2cap_buf(uint16_t len) {
BT_HDR* msg = (BT_HDR*)osi_malloc(BT_HDR_SIZE + L2CAP_MIN_OFFSET +
len /* LE-only, no need for FCS here */);
msg->offset = L2CAP_MIN_OFFSET;
msg->len = len;
return msg;
}
inline uint8_t* get_l2cap_sdu_start_ptr(BT_HDR* msg) {
return (uint8_t*)(msg) + BT_HDR_SIZE + L2CAP_MIN_OFFSET;
}
class HearingAidImpl;
HearingAidImpl* instance;
HearingAidAudioReceiver* audioReceiver;
class HearingDevices {
public:
void Add(HearingDevice device) {
if (FindByAddress(device.address) != nullptr) return;
devices.push_back(device);
}
void Remove(const RawAddress& address) {
for (auto it = devices.begin(); it != devices.end();) {
if (it->address != address) {
++it;
continue;
}
it = devices.erase(it);
return;
}
}
HearingDevice* FindByAddress(const RawAddress& address) {
auto iter = std::find_if(devices.begin(), devices.end(),
[&address](const HearingDevice& device) {
return device.address == address;
});
return (iter == devices.end()) ? nullptr : &(*iter);
}
HearingDevice* FindByConnId(uint16_t conn_id) {
auto iter = std::find_if(devices.begin(), devices.end(),
[&conn_id](const HearingDevice& device) {
return device.conn_id == conn_id;
});
return (iter == devices.end()) ? nullptr : &(*iter);
}
HearingDevice* FindByGapHandle(uint16_t gap_handle) {
auto iter = std::find_if(devices.begin(), devices.end(),
[&gap_handle](const HearingDevice& device) {
return device.gap_handle == gap_handle;
});
return (iter == devices.end()) ? nullptr : &(*iter);
}
bool IsAnyConnectionUpdateStarted() {
for (const auto& d : devices) {
if (d.connection_update_status == STARTED) return true;
}
return false;
}
void StartRssiLog() {
int read_rssi_start_interval_count = 0;
for (auto& d : devices) {
VLOG(1) << __func__ << ": device=" << d.address << ", read_rssi_count=" << d.read_rssi_count;
// Reset the count
if (d.read_rssi_count <= 0) {
d.read_rssi_count = READ_RSSI_NUM_TRIES;
d.num_intervals_since_last_rssi_read = read_rssi_start_interval_count;
// Spaced apart the Read RSSI commands to the BT controller.
read_rssi_start_interval_count += PERIOD_TO_READ_RSSI_IN_INTERVALS / 2;
read_rssi_start_interval_count %= PERIOD_TO_READ_RSSI_IN_INTERVALS;
std::deque<rssi_log>& rssi_logs = d.audio_stats.rssi_history;
if (rssi_logs.size() >= MAX_RSSI_HISTORY) {
rssi_logs.pop_front();
}
rssi_logs.emplace_back();
}
}
}
size_t size() { return (devices.size()); }
std::vector<HearingDevice> devices;
};
static void write_rpt_ctl_cfg_cb(uint16_t conn_id, tGATT_STATUS status,
uint16_t handle, void* data) {
if (status != GATT_SUCCESS) {
LOG(ERROR) << __func__ << ": handle=" << handle << ", conn_id=" << conn_id
<< ", status=" << loghex(static_cast<uint8_t>(status));
}
}
g722_encode_state_t* encoder_state_left = nullptr;
g722_encode_state_t* encoder_state_right = nullptr;
inline void encoder_state_init() {
if (encoder_state_left != nullptr) {
LOG(WARNING) << __func__ << ": encoder already initialized";
return;
}
encoder_state_left = g722_encode_init(nullptr, 64000, G722_PACKED);
encoder_state_right = g722_encode_init(nullptr, 64000, G722_PACKED);
}
inline void encoder_state_release() {
if (encoder_state_left != nullptr) {
g722_encode_release(encoder_state_left);
encoder_state_left = nullptr;
g722_encode_release(encoder_state_right);
encoder_state_right = nullptr;
}
}
class HearingAidImpl : public HearingAid {
private:
// Keep track of whether the Audio Service has resumed audio playback
bool audio_running;
// For Testing: overwrite the MIN_CE_LEN during connection parameter updates
uint16_t overwrite_min_ce_len;
public:
~HearingAidImpl() override = default;
HearingAidImpl(bluetooth::hearing_aid::HearingAidCallbacks* callbacks,
Closure initCb)
: audio_running(false),
overwrite_min_ce_len(0),
gatt_if(0),
seq_counter(0),
current_volume(VOLUME_UNKNOWN),
callbacks(callbacks),
codec_in_use(0) {
default_data_interval_ms = (uint16_t)osi_property_get_int32(
"persist.bluetooth.hearingaid.interval", (int32_t)HA_INTERVAL_20_MS);
if ((default_data_interval_ms != HA_INTERVAL_10_MS) &&
(default_data_interval_ms != HA_INTERVAL_20_MS)) {
LOG(ERROR) << __func__
<< ": invalid interval=" << default_data_interval_ms
<< "ms. Overwriting back to default";
default_data_interval_ms = HA_INTERVAL_20_MS;
}
VLOG(2) << __func__
<< ", default_data_interval_ms=" << default_data_interval_ms;
overwrite_min_ce_len = (uint16_t)osi_property_get_int32(
"persist.bluetooth.hearingaidmincelen", 0);
if (overwrite_min_ce_len) {
LOG(INFO) << __func__
<< ": Overwrites MIN_CE_LEN=" << overwrite_min_ce_len;
}
BTA_GATTC_AppRegister(
hearingaid_gattc_callback,
base::Bind(
[](Closure initCb, uint8_t client_id, uint8_t status) {
if (status != GATT_SUCCESS) {
LOG(ERROR) << "Can't start Hearing Aid profile - no gatt "
"clients left!";
return;
}
instance->gatt_if = client_id;
initCb.Run();
},
initCb), false);
}
uint16_t UpdateBleConnParams(const RawAddress& address) {
/* List of parameters that depends on the chosen Connection Interval */
uint16_t min_ce_len;
uint16_t connection_interval;
switch (default_data_interval_ms) {
case HA_INTERVAL_10_MS:
min_ce_len = MIN_CE_LEN_10MS_CI;
connection_interval = CONNECTION_INTERVAL_10MS_PARAM;
break;
case HA_INTERVAL_20_MS:
min_ce_len = MIN_CE_LEN_20MS_CI;
connection_interval = CONNECTION_INTERVAL_20MS_PARAM;
break;
default:
LOG(ERROR) << __func__ << ":Error: invalid default_data_interval_ms="
<< default_data_interval_ms;
min_ce_len = MIN_CE_LEN_10MS_CI;
connection_interval = CONNECTION_INTERVAL_10MS_PARAM;
}
if (overwrite_min_ce_len != 0) {
VLOG(2) << __func__ << ": min_ce_len=" << min_ce_len
<< " is overwritten to " << overwrite_min_ce_len;
min_ce_len = overwrite_min_ce_len;
}
L2CA_UpdateBleConnParams(address, connection_interval, connection_interval,
0x000A, 0x0064 /*1s*/, min_ce_len, min_ce_len);
return connection_interval;
}
void Connect(const RawAddress& address) override {
DVLOG(2) << __func__ << " " << address;
hearingDevices.Add(HearingDevice(address, true));
BTA_GATTC_Open(gatt_if, address, true, false);
}
void AddToAcceptlist(const RawAddress& address) override {
VLOG(2) << __func__ << " address: " << address;
hearingDevices.Add(HearingDevice(address, true));
BTA_GATTC_Open(gatt_if, address, false, false);
}
void AddFromStorage(const HearingDevice& dev_info, uint16_t is_acceptlisted) {
DVLOG(2) << __func__ << " " << dev_info.address
<< ", hiSyncId=" << loghex(dev_info.hi_sync_id)
<< ", isAcceptlisted=" << is_acceptlisted;
if (is_acceptlisted) {
hearingDevices.Add(dev_info);
// TODO: we should increase the scanning window for few seconds, to get
// faster initial connection, same after hearing aid disconnects, i.e.
// BTM_BleSetConnScanParams(2048, 1024);
/* add device into BG connection to accept remote initiated connection */
BTA_GATTC_Open(gatt_if, dev_info.address, false, false);
}
callbacks->OnDeviceAvailable(dev_info.capabilities, dev_info.hi_sync_id,
dev_info.address);
}
int GetDeviceCount() { return (hearingDevices.size()); }
void OnGattConnected(tGATT_STATUS status, uint16_t conn_id,
tGATT_IF client_if, RawAddress address,
tBT_TRANSPORT transport, uint16_t mtu) {
VLOG(2) << __func__ << ": address=" << address << ", conn_id=" << conn_id;
HearingDevice* hearingDevice = hearingDevices.FindByAddress(address);
if (!hearingDevice) {
/* When Hearing Aid is quickly disabled and enabled in settings, this case
* might happen */
LOG(WARNING) << "Closing connection to non hearing-aid device, address="
<< address;
BTA_GATTC_Close(conn_id);
return;
}
if (status != GATT_SUCCESS) {
if (!hearingDevice->connecting_actively) {
// acceptlist connection failed, that's ok.
return;
}
LOG(INFO) << "Failed to connect to Hearing Aid device";
hearingDevices.Remove(address);
callbacks->OnConnectionState(ConnectionState::DISCONNECTED, address);
return;
}
hearingDevice->connecting_actively = false;
hearingDevice->conn_id = conn_id;
/* We must update connection parameters one at a time, otherwise anchor
* point (start of connection event) for two devices can be too close to
* each other. Here, by setting min_ce_len=max_ce_len=X, we force controller
* to move anchor point of both connections away from each other, to make
* sure we'll be able to fit all the data we want in one connection event.
*/
bool any_update_pending = hearingDevices.IsAnyConnectionUpdateStarted();
// mark the device as pending connection update. If we don't start the
// update now, it'll be started once current device finishes.
if (!any_update_pending) {
hearingDevice->connection_update_status = STARTED;
hearingDevice->requested_connection_interval =
UpdateBleConnParams(address);
} else {
hearingDevice->connection_update_status = AWAITING;
}
if (controller_get_interface()->supports_ble_2m_phy()) {
LOG(INFO) << address << " set preferred PHY to 2M";
BTM_BleSetPhy(address, PHY_LE_2M, PHY_LE_2M, 0);
}
// Set data length
// TODO(jpawlowski: for 16khz only 87 is required, optimize
BTM_SetBleDataLength(address, 167);
if (BTM_SecIsSecurityPending(address)) {
/* if security collision happened, wait for encryption done
* (BTA_GATTC_ENC_CMPL_CB_EVT) */
return;
}
/* verify bond */
if (BTM_IsEncrypted(address, BT_TRANSPORT_LE)) {
/* if link has been encrypted */
OnEncryptionComplete(address, true);
return;
}
if (BTM_IsLinkKeyKnown(address, BT_TRANSPORT_LE)) {
/* if bonded and link not encrypted */
BTM_SetEncryption(address, BT_TRANSPORT_LE, encryption_callback, nullptr,
BTM_BLE_SEC_ENCRYPT);
return;
}
/* otherwise let it go through */
OnEncryptionComplete(address, true);
}
void OnConnectionUpdateComplete(uint16_t conn_id, tBTA_GATTC* p_data) {
HearingDevice* hearingDevice = hearingDevices.FindByConnId(conn_id);
if (!hearingDevice) {
DVLOG(2) << "Skipping unknown device, conn_id=" << loghex(conn_id);
return;
}
if (p_data) {
if (p_data->conn_update.status == 0) {
bool same_conn_interval =
(hearingDevice->requested_connection_interval ==
p_data->conn_update.interval);
switch (hearingDevice->connection_update_status) {
case COMPLETED:
if (!same_conn_interval) {
LOG(WARNING) << __func__
<< ": Unexpected change. Redo. connection interval="
<< p_data->conn_update.interval << ", expected="
<< hearingDevice->requested_connection_interval
<< ", conn_id=" << conn_id
<< ", connection_update_status="
<< hearingDevice->connection_update_status;
// Redo this connection interval change.
hearingDevice->connection_update_status = AWAITING;
}
break;
case STARTED:
if (same_conn_interval) {
LOG(INFO) << __func__
<< ": Connection update completed. conn_id=" << conn_id
<< ", device=" << hearingDevice->address;
hearingDevice->connection_update_status = COMPLETED;
} else {
LOG(WARNING) << __func__
<< ": Ignored. Different connection interval="
<< p_data->conn_update.interval << ", expected="
<< hearingDevice->requested_connection_interval
<< ", conn_id=" << conn_id
<< ", connection_update_status="
<< hearingDevice->connection_update_status;
// Wait for the right Connection Update Completion.
return;
}
break;
case AWAITING:
case NONE:
break;
}
// Inform this side and other side device (if any) of Connection
// Updates.
std::vector<uint8_t> conn_update(
{CONTROL_POINT_OP_STATE_CHANGE, STATE_CHANGE_CONN_UPDATE,
(uint8_t)p_data->conn_update.interval});
send_state_change_to_other_side(hearingDevice, conn_update);
send_state_change(hearingDevice, conn_update);
} else {
LOG(INFO) << __func__ << ": error status="
<< loghex(static_cast<uint8_t>(p_data->conn_update.status))
<< ", conn_id=" << conn_id
<< ", device=" << hearingDevice->address
<< ", connection_update_status="
<< hearingDevice->connection_update_status;
if (hearingDevice->connection_update_status == STARTED) {
// Redo this connection interval change.
LOG(ERROR) << __func__ << ": Redo Connection Interval change";
hearingDevice->connection_update_status = AWAITING;
}
}
} else {
hearingDevice->connection_update_status = NONE;
}
for (auto& device : hearingDevices.devices) {
if (device.conn_id && (device.connection_update_status == AWAITING)) {
device.connection_update_status = STARTED;
device.requested_connection_interval =
UpdateBleConnParams(device.address);
return;
}
}
}
// Completion Callback for the RSSI read operation.
void OnReadRssiComplete(const RawAddress& address, int8_t rssi_value) {
HearingDevice* hearingDevice = hearingDevices.FindByAddress(address);
if (!hearingDevice) {
LOG(INFO) << "Skipping unknown device" << address;
return;
}
VLOG(1) << __func__ << ": device=" << address << ", rssi=" << (int)rssi_value;
if (hearingDevice->read_rssi_count <= 0) {
LOG(ERROR) << __func__ << ": device=" << address
<< ", invalid read_rssi_count=" << hearingDevice->read_rssi_count;
return;
}
rssi_log& last_log_set = hearingDevice->audio_stats.rssi_history.back();
if (hearingDevice->read_rssi_count == READ_RSSI_NUM_TRIES) {
// Store the timestamp only for the first one after packet flush
clock_gettime(CLOCK_REALTIME, &last_log_set.timestamp);
LOG(INFO) << __func__ << ": store time. device=" << address << ", rssi=" << (int)rssi_value;
}
last_log_set.rssi.emplace_back(rssi_value);
hearingDevice->read_rssi_count--;
}
void OnEncryptionComplete(const RawAddress& address, bool success) {
HearingDevice* hearingDevice = hearingDevices.FindByAddress(address);
if (!hearingDevice) {
DVLOG(2) << "Skipping unknown device" << address;
return;
}
if (!success) {
LOG(ERROR) << "encryption failed";
BTA_GATTC_Close(hearingDevice->conn_id);
if (hearingDevice->first_connection) {
callbacks->OnConnectionState(ConnectionState::DISCONNECTED, address);
}
return;
}
DVLOG(2) << __func__ << " " << address;
if (hearingDevice->audio_control_point_handle &&
hearingDevice->audio_status_handle &&
hearingDevice->audio_status_ccc_handle &&
hearingDevice->volume_handle && hearingDevice->read_psm_handle) {
// Use cached data, jump to read PSM
ReadPSM(hearingDevice);
} else {
hearingDevice->first_connection = true;
BTA_GATTC_ServiceSearchRequest(hearingDevice->conn_id, &HEARING_AID_UUID);
}
}
void OnServiceChangeEvent(const RawAddress& address) {
HearingDevice* hearingDevice = hearingDevices.FindByAddress(address);
if (!hearingDevice) {
VLOG(2) << "Skipping unknown device" << address;
return;
}
LOG(INFO) << __func__ << ": address=" << address;
hearingDevice->first_connection = true;
hearingDevice->service_changed_rcvd = true;
BtaGattQueue::Clean(hearingDevice->conn_id);
if (hearingDevice->gap_handle) {
GAP_ConnClose(hearingDevice->gap_handle);
hearingDevice->gap_handle = 0;
}
}
void OnServiceDiscDoneEvent(const RawAddress& address) {
HearingDevice* hearingDevice = hearingDevices.FindByAddress(address);
if (!hearingDevice) {
VLOG(2) << "Skipping unknown device" << address;
return;
}
if (hearingDevice->service_changed_rcvd) {
BTA_GATTC_ServiceSearchRequest(hearingDevice->conn_id, &HEARING_AID_UUID);
}
}
void OnServiceSearchComplete(uint16_t conn_id, tGATT_STATUS status) {
HearingDevice* hearingDevice = hearingDevices.FindByConnId(conn_id);
if (!hearingDevice) {
DVLOG(2) << "Skipping unknown device, conn_id=" << loghex(conn_id);
return;
}
// Known device, nothing to do.
if (!hearingDevice->first_connection) return;
if (status != GATT_SUCCESS) {
/* close connection and report service discovery complete with error */
LOG(ERROR) << "Service discovery failed";
if (hearingDevice->first_connection) {
callbacks->OnConnectionState(ConnectionState::DISCONNECTED,
hearingDevice->address);
}
return;
}
const std::list<gatt::Service>* services = BTA_GATTC_GetServices(conn_id);
const gatt::Service* service = nullptr;
for (const gatt::Service& tmp : *services) {
if (tmp.uuid == Uuid::From16Bit(UUID_SERVCLASS_GATT_SERVER)) {
LOG(INFO) << "Found UUID_SERVCLASS_GATT_SERVER, handle="
<< loghex(tmp.handle);
const gatt::Service* service_changed_service = &tmp;
find_server_changed_ccc_handle(conn_id, service_changed_service);
} else if (tmp.uuid == HEARING_AID_UUID) {
LOG(INFO) << "Found Hearing Aid service, handle=" << loghex(tmp.handle);
service = &tmp;
}
}
if (!service) {
LOG(ERROR) << "No Hearing Aid service found";
callbacks->OnConnectionState(ConnectionState::DISCONNECTED,
hearingDevice->address);
return;
}
for (const gatt::Characteristic& charac : service->characteristics) {
if (charac.uuid == READ_ONLY_PROPERTIES_UUID) {
if (!btif_storage_get_hearing_aid_prop(
hearingDevice->address, &hearingDevice->capabilities,
&hearingDevice->hi_sync_id, &hearingDevice->render_delay,
&hearingDevice->preparation_delay, &hearingDevice->codecs)) {
VLOG(2) << "Reading read only properties "
<< loghex(charac.value_handle);
BtaGattQueue::ReadCharacteristic(
conn_id, charac.value_handle,
HearingAidImpl::OnReadOnlyPropertiesReadStatic, nullptr);
}
} else if (charac.uuid == AUDIO_CONTROL_POINT_UUID) {
hearingDevice->audio_control_point_handle = charac.value_handle;
// store audio control point!
} else if (charac.uuid == AUDIO_STATUS_UUID) {
hearingDevice->audio_status_handle = charac.value_handle;
hearingDevice->audio_status_ccc_handle =
find_ccc_handle(conn_id, charac.value_handle);
if (!hearingDevice->audio_status_ccc_handle) {
LOG(ERROR) << __func__ << ": cannot find Audio Status CCC descriptor";
continue;
}
LOG(INFO) << __func__
<< ": audio_status_handle=" << loghex(charac.value_handle)
<< ", ccc=" << loghex(hearingDevice->audio_status_ccc_handle);
} else if (charac.uuid == VOLUME_UUID) {
hearingDevice->volume_handle = charac.value_handle;
} else if (charac.uuid == LE_PSM_UUID) {
hearingDevice->read_psm_handle = charac.value_handle;
} else {
LOG(WARNING) << "Unknown characteristic found:" << charac.uuid;
}
}
if (hearingDevice->service_changed_rcvd) {
hearingDevice->service_changed_rcvd = false;
}
ReadPSM(hearingDevice);
}
void ReadPSM(HearingDevice* hearingDevice) {
if (hearingDevice->read_psm_handle) {
LOG(INFO) << "Reading PSM " << loghex(hearingDevice->read_psm_handle)
<< ", device=" << hearingDevice->address;
BtaGattQueue::ReadCharacteristic(
hearingDevice->conn_id, hearingDevice->read_psm_handle,
HearingAidImpl::OnPsmReadStatic, nullptr);
}
}
void OnNotificationEvent(uint16_t conn_id, uint16_t handle, uint16_t len,
uint8_t* value) {
HearingDevice* device = hearingDevices.FindByConnId(conn_id);
if (!device) {
LOG(INFO) << __func__
<< ": Skipping unknown device, conn_id=" << loghex(conn_id);
return;
}
if (device->audio_status_handle != handle) {
LOG(INFO) << __func__ << ": Mismatched handle, "
<< loghex(device->audio_status_handle)
<< "!=" << loghex(handle);
return;
}
if (len < 1) {
LOG(ERROR) << __func__ << ": Data Length too small, len=" << len
<< ", expecting at least 1";
return;
}
if (value[0] != 0) {
LOG(INFO) << __func__
<< ": Invalid returned status. data=" << loghex(value[0]);
return;
}
LOG(INFO) << __func__
<< ": audio status success notification. command_acked="
<< device->command_acked;
device->command_acked = true;
}
void OnReadOnlyPropertiesRead(uint16_t conn_id, tGATT_STATUS status,
uint16_t handle, uint16_t len, uint8_t* value,
void* data) {
HearingDevice* hearingDevice = hearingDevices.FindByConnId(conn_id);
if (!hearingDevice) {
DVLOG(2) << __func__ << "unknown conn_id=" << loghex(conn_id);
return;
}
VLOG(2) << __func__ << " " << base::HexEncode(value, len);
uint8_t* p = value;
uint8_t version;
STREAM_TO_UINT8(version, p);
if (version != 0x01) {
LOG(WARNING) << "Unknown version: " << loghex(version);
return;
}
// version 0x01 of read only properties:
if (len < 17) {
LOG(WARNING) << "Read only properties too short: " << loghex(len);
return;
}
uint8_t capabilities;
STREAM_TO_UINT8(capabilities, p);
hearingDevice->capabilities = capabilities;
bool side = capabilities & CAPABILITY_SIDE;
bool standalone = capabilities & CAPABILITY_BINAURAL;
VLOG(2) << __func__ << " capabilities: " << (side ? "right" : "left")
<< ", " << (standalone ? "binaural" : "monaural");
if (capabilities & CAPABILITY_RESERVED) {
LOG(WARNING) << __func__ << " reserved capabilities are set";
}
STREAM_TO_UINT64(hearingDevice->hi_sync_id, p);
VLOG(2) << __func__ << " hiSyncId: " << loghex(hearingDevice->hi_sync_id);
uint8_t feature_map;
STREAM_TO_UINT8(feature_map, p);
STREAM_TO_UINT16(hearingDevice->render_delay, p);
VLOG(2) << __func__
<< " render delay: " << loghex(hearingDevice->render_delay);
STREAM_TO_UINT16(hearingDevice->preparation_delay, p);
VLOG(2) << __func__ << " preparation delay: "
<< loghex(hearingDevice->preparation_delay);
uint16_t codecs;
STREAM_TO_UINT16(codecs, p);
hearingDevice->codecs = codecs;
VLOG(2) << __func__ << " supported codecs: " << loghex(codecs);
if (codecs & (1 << CODEC_G722_16KHZ)) VLOG(2) << "\tG722@16kHz";
if (codecs & (1 << CODEC_G722_24KHZ)) VLOG(2) << "\tG722@24kHz";
if (!(codecs & (1 << CODEC_G722_16KHZ))) {
LOG(WARNING) << __func__ << " Mandatory codec, G722@16kHz not supported";
}
}
uint16_t CalcCompressedAudioPacketSize(uint16_t codec_type,
int connection_interval) {
int sample_rate;
const int sample_bit_rate = 16; /* 16 bits per sample */
const int compression_ratio = 4; /* G.722 has a 4:1 compression ratio */
if (codec_type == CODEC_G722_24KHZ) {
sample_rate = 24000;
} else {
sample_rate = 16000;
}
// compressed_data_packet_size is the size in bytes of the compressed audio
// data buffer that is generated for each connection interval.
uint32_t compressed_data_packet_size =
(sample_rate * connection_interval * (sample_bit_rate / 8) /
compression_ratio) /
1000;
return ((uint16_t)compressed_data_packet_size);
}
void ChooseCodec(const HearingDevice& hearingDevice) {
if (codec_in_use) return;
// use the best codec available for this pair of devices.
uint16_t codecs = hearingDevice.codecs;
if (hearingDevice.hi_sync_id != 0) {
for (const auto& device : hearingDevices.devices) {
if (device.hi_sync_id != hearingDevice.hi_sync_id) continue;
codecs &= device.codecs;
}
}
if ((codecs & (1 << CODEC_G722_24KHZ)) &&
controller_get_interface()->supports_ble_2m_phy() &&
default_data_interval_ms == HA_INTERVAL_10_MS) {
codec_in_use = CODEC_G722_24KHZ;
} else if (codecs & (1 << CODEC_G722_16KHZ)) {
codec_in_use = CODEC_G722_16KHZ;
}
}
void OnAudioStatus(uint16_t conn_id, tGATT_STATUS status, uint16_t handle,
uint16_t len, uint8_t* value, void* data) {
LOG(INFO) << __func__ << " " << base::HexEncode(value, len);
}
void OnPsmRead(uint16_t conn_id, tGATT_STATUS status, uint16_t handle,
uint16_t len, uint8_t* value, void* data) {
HearingDevice* hearingDevice = hearingDevices.FindByConnId(conn_id);
if (!hearingDevice) {
DVLOG(2) << "Skipping unknown read event, conn_id=" << loghex(conn_id);
return;
}
if (status != GATT_SUCCESS) {
LOG(ERROR) << "Error reading PSM for device" << hearingDevice->address;
return;
}
if (len > 2) {
LOG(ERROR) << "Bad PSM length";
return;
}
uint16_t psm = *((uint16_t*)value);
VLOG(2) << "read psm:" << loghex(psm);
ConnectSocket(hearingDevice, psm);
}
void ConnectSocket(HearingDevice* hearingDevice, uint16_t psm) {
tL2CAP_CFG_INFO cfg_info = tL2CAP_CFG_INFO{.mtu = 512};
SendEnableServiceChangedInd(hearingDevice);
uint8_t service_id = hearingDevice->isLeft()
? BTM_SEC_SERVICE_HEARING_AID_LEFT
: BTM_SEC_SERVICE_HEARING_AID_RIGHT;
uint16_t gap_handle = GAP_ConnOpen(
"", service_id, false, &hearingDevice->address, psm, 514 /* MPS */,
&cfg_info, nullptr, BTM_SEC_NONE /* TODO: request security ? */,
HearingAidImpl::GapCallbackStatic, BT_TRANSPORT_LE);
if (gap_handle == GAP_INVALID_HANDLE) {
LOG(ERROR) << "UNABLE TO GET gap_handle";
return;
}
hearingDevice->gap_handle = gap_handle;
LOG(INFO) << "Successfully sent GAP connect request";
}
static void OnReadOnlyPropertiesReadStatic(uint16_t conn_id,
tGATT_STATUS status,
uint16_t handle, uint16_t len,
uint8_t* value, void* data) {
if (instance)
instance->OnReadOnlyPropertiesRead(conn_id, status, handle, len, value,
data);
}
static void OnAudioStatusStatic(uint16_t conn_id, tGATT_STATUS status,
uint16_t handle, uint16_t len, uint8_t* value,
void* data) {
if (instance)
instance->OnAudioStatus(conn_id, status, handle, len, value, data);
}
static void OnPsmReadStatic(uint16_t conn_id, tGATT_STATUS status,
uint16_t handle, uint16_t len, uint8_t* value,
void* data) {
if (instance)
instance->OnPsmRead(conn_id, status, handle, len, value, data);
}
/* CoC Socket is ready */
void OnGapConnection(const RawAddress& address) {
HearingDevice* hearingDevice = hearingDevices.FindByAddress(address);
if (!hearingDevice) {
LOG(INFO) << "Device not connected to profile" << address;
return;
}
if (hearingDevice->first_connection) {
btif_storage_add_hearing_aid(*hearingDevice);
hearingDevice->first_connection = false;
}
LOG(INFO) << __func__ << ": audio_status_handle="
<< loghex(hearingDevice->audio_status_handle)
<< ", audio_status_ccc_handle="
<< loghex(hearingDevice->audio_status_ccc_handle);
/* Register and enable the Audio Status Notification */
tGATT_STATUS register_status;
register_status = BTA_GATTC_RegisterForNotifications(
gatt_if, address, hearingDevice->audio_status_handle);
if (register_status != GATT_SUCCESS) {
LOG(ERROR) << __func__
<< ": BTA_GATTC_RegisterForNotifications failed, status="
<< loghex(static_cast<uint8_t>(register_status));
return;
}
std::vector<uint8_t> value(2);
uint8_t* ptr = value.data();
UINT16_TO_STREAM(ptr, GATT_CHAR_CLIENT_CONFIG_NOTIFICATION);
BtaGattQueue::WriteDescriptor(
hearingDevice->conn_id, hearingDevice->audio_status_ccc_handle,
std::move(value), GATT_WRITE, write_rpt_ctl_cfg_cb, nullptr);
ChooseCodec(*hearingDevice);
SendStart(hearingDevice);
if (audio_running) {
// Inform the other side (if any) of this connection
std::vector<uint8_t> inform_conn_state(
{CONTROL_POINT_OP_STATE_CHANGE, STATE_CHANGE_OTHER_SIDE_CONNECTED});
send_state_change_to_other_side(hearingDevice, inform_conn_state);
}
hearingDevice->accepting_audio = true;
LOG(INFO) << __func__ << ": address=" << address
<< ", hi_sync_id=" << loghex(hearingDevice->hi_sync_id)
<< ", codec_in_use=" << loghex(codec_in_use)
<< ", audio_running=" << audio_running;
StartSendingAudio(*hearingDevice);
callbacks->OnDeviceAvailable(hearingDevice->capabilities,
hearingDevice->hi_sync_id, address);
callbacks->OnConnectionState(ConnectionState::CONNECTED, address);
}
void StartSendingAudio(const HearingDevice& hearingDevice) {
VLOG(0) << __func__ << ": device=" << hearingDevice.address;
if (encoder_state_left == nullptr) {
encoder_state_init();
seq_counter = 0;
// use the best codec avaliable for this pair of devices.
uint16_t codecs = hearingDevice.codecs;
if (hearingDevice.hi_sync_id != 0) {
for (const auto& device : hearingDevices.devices) {
if (device.hi_sync_id != hearingDevice.hi_sync_id) continue;
codecs &= device.codecs;
}
}
CodecConfiguration codec;
if (codec_in_use == CODEC_G722_24KHZ) {
codec.sample_rate = 24000;
} else {
codec.sample_rate = 16000;
}
codec.bit_rate = 16;
codec.data_interval_ms = default_data_interval_ms;
uint16_t delay_report_ms = 0;
if (hearingDevice.render_delay != 0) {
delay_report_ms =
hearingDevice.render_delay +
(ADD_RENDER_DELAY_INTERVALS * default_data_interval_ms);
}
HearingAidAudioSource::Start(codec, audioReceiver, delay_report_ms);
}
}
void OnAudioSuspend(const std::function<void()>& stop_audio_ticks) {
CHECK(stop_audio_ticks) << "stop_audio_ticks is empty";
if (!audio_running) {
LOG(WARNING) << __func__ << ": Unexpected audio suspend";
} else {
LOG(INFO) << __func__ << ": audio_running=" << audio_running;
}
audio_running = false;
stop_audio_ticks();
std::vector<uint8_t> stop({CONTROL_POINT_OP_STOP});
for (auto& device : hearingDevices.devices) {
if (!device.accepting_audio) continue;
if (!device.playback_started) {
LOG(WARNING) << __func__
<< ": Playback not started, skip send Stop cmd, device="
<< device.address;
} else {
LOG(INFO) << __func__ << ": send Stop cmd, device=" << device.address;
device.playback_started = false;
device.command_acked = false;
BtaGattQueue::WriteCharacteristic(device.conn_id,
device.audio_control_point_handle,
stop, GATT_WRITE, nullptr, nullptr);
}
}
}
void OnAudioResume(const std::function<void()>& start_audio_ticks) {
CHECK(start_audio_ticks) << "start_audio_ticks is empty";
if (audio_running) {
LOG(ERROR) << __func__ << ": Unexpected Audio Resume";
} else {
LOG(INFO) << __func__ << ": audio_running=" << audio_running;
}
for (auto& device : hearingDevices.devices) {
if (!device.accepting_audio) continue;
audio_running = true;
SendStart(&device);
}
if (!audio_running) {
LOG(INFO) << __func__ << ": No device (0/" << GetDeviceCount()
<< ") ready to start";
return;
}
// TODO: shall we also reset the encoder ?
encoder_state_release();
encoder_state_init();
seq_counter = 0;
start_audio_ticks();
}
uint8_t GetOtherSideStreamStatus(HearingDevice* this_side_device) {
for (auto& device : hearingDevices.devices) {
if ((device.address == this_side_device->address) ||
(device.hi_sync_id != this_side_device->hi_sync_id)) {
continue;
}
if (audio_running && (device.conn_id != 0)) {
return (OTHER_SIDE_IS_STREAMING);
} else {
return (OTHER_SIDE_NOT_STREAMING);
}
}
return (OTHER_SIDE_NOT_STREAMING);
}
void SendEnableServiceChangedInd(HearingDevice* device) {
VLOG(2) << __func__ << " Enable " << device->address
<< "service changed ind.";
std::vector<uint8_t> value(2);
uint8_t* ptr = value.data();
UINT16_TO_STREAM(ptr, GATT_CHAR_CLIENT_CONFIG_INDICTION);
BtaGattQueue::WriteDescriptor(
device->conn_id, device->service_changed_ccc_handle, std::move(value),
GATT_WRITE, nullptr, nullptr);
}
void SendStart(HearingDevice* device) {
std::vector<uint8_t> start({CONTROL_POINT_OP_START, codec_in_use,
AUDIOTYPE_UNKNOWN, (uint8_t)current_volume,
OTHER_SIDE_NOT_STREAMING});
if (!audio_running) {
if (!device->playback_started) {
LOG(INFO) << __func__
<< ": Skip Send Start since audio is not running, device="
<< device->address;
} else {
LOG(ERROR) << __func__
<< ": Audio not running but Playback has started, device="
<< device->address;
}
return;
}
if (current_volume == VOLUME_UNKNOWN) start[3] = (uint8_t)VOLUME_MIN;
if (device->playback_started) {
LOG(ERROR) << __func__
<< ": Playback already started, skip send Start cmd, device="
<< device->address;
} else {
start[4] = GetOtherSideStreamStatus(device);
LOG(INFO) << __func__ << ": send Start cmd, volume=" << loghex(start[3])
<< ", audio type=" << loghex(start[2])
<< ", device=" << device->address
<< ", other side streaming=" << loghex(start[4]);
device->playback_started = true;
device->command_acked = false;
BtaGattQueue::WriteCharacteristic(device->conn_id,
device->audio_control_point_handle,
start, GATT_WRITE, nullptr, nullptr);
}
}
void OnAudioDataReady(const std::vector<uint8_t>& data) {
/* For now we assume data comes in as 16bit per sample 16kHz PCM stereo */
DVLOG(2) << __func__;
int num_samples =
data.size() / (2 /*bytes_per_sample*/ * 2 /*number of channels*/);
// The G.722 codec accept only even number of samples for encoding
if (num_samples % 2 != 0)
LOG(FATAL) << "num_samples is not even: " << num_samples;
// TODO: we should cache left/right and current state, instad of recomputing
// it for each packet, 100 times a second.
HearingDevice* left = nullptr;
HearingDevice* right = nullptr;
for (auto& device : hearingDevices.devices) {
if (!device.accepting_audio) continue;
if (device.isLeft())
left = &device;
else
right = &device;
}
if (left == nullptr && right == nullptr) {
LOG(WARNING) << __func__ << ": No more (0/" << GetDeviceCount()
<< ") devices ready";
DoDisconnectAudioStop();
return;
}
std::vector<uint16_t> chan_left;
std::vector<uint16_t> chan_right;
if (left == nullptr || right == nullptr) {
for (int i = 0; i < num_samples; i++) {
const uint8_t* sample = data.data() + i * 4;
int16_t left = (int16_t)((*(sample + 1) << 8) + *sample) >> 1;
sample += 2;
int16_t right = (int16_t)((*(sample + 1) << 8) + *sample) >> 1;
uint16_t mono_data = (int16_t)(((uint32_t)left + (uint32_t)right) >> 1);
chan_left.push_back(mono_data);
chan_right.push_back(mono_data);
}
} else {
for (int i = 0; i < num_samples; i++) {
const uint8_t* sample = data.data() + i * 4;
uint16_t left = (int16_t)((*(sample + 1) << 8) + *sample) >> 1;
chan_left.push_back(left);
sample += 2;
uint16_t right = (int16_t)((*(sample + 1) << 8) + *sample) >> 1;
chan_right.push_back(right);
}
}
// TODO: monural, binarual check
// divide encoded data into packets, add header, send.
// TODO: make those buffers static and global to prevent constant
// reallocations
// TODO: this should basically fit the encoded data, tune the size later
std::vector<uint8_t> encoded_data_left;
if (left) {
// TODO: instead of a magic number, we need to figure out the correct
// buffer size
encoded_data_left.resize(4000);
int encoded_size =
g722_encode(encoder_state_left, encoded_data_left.data(),
(const int16_t*)chan_left.data(), chan_left.size());
encoded_data_left.resize(encoded_size);
uint16_t cid = GAP_ConnGetL2CAPCid(left->gap_handle);
uint16_t packets_to_flush = L2CA_FlushChannel(cid, L2CAP_FLUSH_CHANS_GET);
if (packets_to_flush) {
VLOG(2) << left->address << " skipping " << packets_to_flush
<< " packets";
left->audio_stats.packet_flush_count += packets_to_flush;
left->audio_stats.frame_flush_count++;
hearingDevices.StartRssiLog();
}
// flush all packets stuck in queue
L2CA_FlushChannel(cid, 0xffff);
check_and_do_rssi_read(left);
}
std::vector<uint8_t> encoded_data_right;
if (right) {
// TODO: instead of a magic number, we need to figure out the correct
// buffer size
encoded_data_right.resize(4000);
int encoded_size =
g722_encode(encoder_state_right, encoded_data_right.data(),
(const int16_t*)chan_right.data(), chan_right.size());
encoded_data_right.resize(encoded_size);
uint16_t cid = GAP_ConnGetL2CAPCid(right->gap_handle);
uint16_t packets_to_flush = L2CA_FlushChannel(cid, L2CAP_FLUSH_CHANS_GET);
if (packets_to_flush) {
VLOG(2) << right->address << " skipping " << packets_to_flush
<< " packets";
right->audio_stats.packet_flush_count += packets_to_flush;
right->audio_stats.frame_flush_count++;
hearingDevices.StartRssiLog();
}
// flush all packets stuck in queue
L2CA_FlushChannel(cid, 0xffff);
check_and_do_rssi_read(right);
}
size_t encoded_data_size =
std::max(encoded_data_left.size(), encoded_data_right.size());
uint16_t packet_size =
CalcCompressedAudioPacketSize(codec_in_use, default_data_interval_ms);
for (size_t i = 0; i < encoded_data_size; i += packet_size) {
if (left) {
left->audio_stats.packet_send_count++;
SendAudio(encoded_data_left.data() + i, packet_size, left);
}
if (right) {
right->audio_stats.packet_send_count++;
SendAudio(encoded_data_right.data() + i, packet_size, right);
}
seq_counter++;
}
if (left) left->audio_stats.frame_send_count++;
if (right) right->audio_stats.frame_send_count++;
}
void SendAudio(uint8_t* encoded_data, uint16_t packet_size,
HearingDevice* hearingAid) {
if (!hearingAid->playback_started || !hearingAid->command_acked) {
VLOG(2) << __func__
<< ": Playback stalled, device=" << hearingAid->address
<< ", cmd send=" << hearingAid->playback_started
<< ", cmd acked=" << hearingAid->command_acked;
return;
}
BT_HDR* audio_packet = malloc_l2cap_buf(packet_size + 1);
uint8_t* p = get_l2cap_sdu_start_ptr(audio_packet);
*p = seq_counter;
p++;
memcpy(p, encoded_data, packet_size);
DVLOG(2) << hearingAid->address << " : " << base::HexEncode(p, packet_size);
uint16_t result = GAP_ConnWriteData(hearingAid->gap_handle, audio_packet);
if (result != BT_PASS) {
LOG(ERROR) << " Error sending data: " << loghex(result);
}
}
void GapCallback(uint16_t gap_handle, uint16_t event, tGAP_CB_DATA* data) {
HearingDevice* hearingDevice = hearingDevices.FindByGapHandle(gap_handle);
if (!hearingDevice) {
LOG(INFO) << "Skipping unknown device, gap_handle=" << gap_handle;
return;
}
switch (event) {
case GAP_EVT_CONN_OPENED: {
RawAddress address = *GAP_ConnGetRemoteAddr(gap_handle);
uint16_t tx_mtu = GAP_ConnGetRemMtuSize(gap_handle);
LOG(INFO) << "GAP_EVT_CONN_OPENED " << address << ", tx_mtu=" << tx_mtu;
OnGapConnection(address);
break;
}
// TODO: handle properly!
case GAP_EVT_CONN_CLOSED:
LOG(INFO) << __func__
<< ": GAP_EVT_CONN_CLOSED: " << hearingDevice->address
<< ", playback_started=" << hearingDevice->playback_started;
hearingDevice->accepting_audio = false;
hearingDevice->gap_handle = 0;
hearingDevice->playback_started = false;
hearingDevice->command_acked = false;
break;
case GAP_EVT_CONN_DATA_AVAIL: {
DVLOG(2) << "GAP_EVT_CONN_DATA_AVAIL";
// only data we receive back from hearing aids are some stats, not
// really important, but useful now for debugging.
uint32_t bytes_to_read = 0;
GAP_GetRxQueueCnt(gap_handle, &bytes_to_read);
std::vector<uint8_t> buffer(bytes_to_read);
uint16_t bytes_read = 0;
// TODO:GAP_ConnReadData should accpet uint32_t for length!
GAP_ConnReadData(gap_handle, buffer.data(), buffer.size(), &bytes_read);
if (bytes_read < 4) {
LOG(WARNING) << " Wrong data length";
return;
}
uint8_t* p = buffer.data();
DVLOG(1) << "stats from the hearing aid:";
for (size_t i = 0; i + 4 <= buffer.size(); i += 4) {
uint16_t event_counter, frame_index;
STREAM_TO_UINT16(event_counter, p);
STREAM_TO_UINT16(frame_index, p);
DVLOG(1) << "event_counter=" << event_counter
<< " frame_index: " << frame_index;
}
break;
}
case GAP_EVT_TX_EMPTY:
DVLOG(2) << "GAP_EVT_TX_EMPTY";
break;
case GAP_EVT_CONN_CONGESTED:
DVLOG(2) << "GAP_EVT_CONN_CONGESTED";
// TODO: make it into function
HearingAidAudioSource::Stop();
// TODO: kill the encoder only if all hearing aids are down.
// g722_encode_release(encoder_state);
// encoder_state_left = nulllptr;
// encoder_state_right = nulllptr;
break;
case GAP_EVT_CONN_UNCONGESTED:
DVLOG(2) << "GAP_EVT_CONN_UNCONGESTED";
break;
}
}
static void GapCallbackStatic(uint16_t gap_handle, uint16_t event,
tGAP_CB_DATA* data) {
if (instance) instance->GapCallback(gap_handle, event, data);
}
void DumpRssi(int fd, const HearingDevice& device) {
const struct AudioStats* stats = &device.audio_stats;
if (stats->rssi_history.size() <= 0) {
dprintf(fd, " No RSSI history for %s:\n", device.address.ToString().c_str());
return;
}
dprintf(fd, " RSSI history for %s:\n", device.address.ToString().c_str());
dprintf(fd, " Time of RSSI 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9\n");
for (auto& rssi_logs : stats->rssi_history) {
if (rssi_logs.rssi.size() <= 0) {
break;
}
char eventtime[20];
char temptime[20];
struct tm* tstamp = localtime(&rssi_logs.timestamp.tv_sec);
if (!strftime(temptime, sizeof(temptime), "%H:%M:%S", tstamp)) {
LOG(ERROR) << __func__ << ": strftime fails. tm_sec=" << tstamp->tm_sec << ", tm_min=" << tstamp->tm_min
<< ", tm_hour=" << tstamp->tm_hour;
strlcpy(temptime, "UNKNOWN TIME", sizeof(temptime));
}
snprintf(eventtime, sizeof(eventtime), "%s.%03ld", temptime, rssi_logs.timestamp.tv_nsec / 1000000);
dprintf(fd, " %s: ", eventtime);
for (auto rssi_value : rssi_logs.rssi) {
dprintf(fd, " %04d", rssi_value);
}
dprintf(fd, "\n");
}
}
void Dump(int fd) {
std::stringstream stream;
for (const auto& device : hearingDevices.devices) {
bool side = device.capabilities & CAPABILITY_SIDE;
bool standalone = device.capabilities & CAPABILITY_BINAURAL;
stream << " " << device.address.ToString() << " "
<< (device.accepting_audio ? "" : "not ") << "connected"
<< "\n " << (standalone ? "binaural" : "monaural") << " "
<< (side ? "right" : "left") << " " << loghex(device.hi_sync_id)
<< std::endl;
stream
<< " Packet counts (enqueued/flushed) : "
<< device.audio_stats.packet_send_count << " / "
<< device.audio_stats.packet_flush_count
<< "\n Frame counts (enqueued/flushed) : "
<< device.audio_stats.frame_send_count << " / "
<< device.audio_stats.frame_flush_count << std::endl;
DumpRssi(fd, device);
}
dprintf(fd, "%s", stream.str().c_str());
}
void Disconnect(const RawAddress& address) override {
DVLOG(2) << __func__;
HearingDevice* hearingDevice = hearingDevices.FindByAddress(address);
if (!hearingDevice) {
LOG(INFO) << "Device not connected to profile" << address;
return;
}
VLOG(2) << __func__ << ": " << address;
bool connected = hearingDevice->accepting_audio;
LOG(INFO) << "GAP_EVT_CONN_CLOSED: " << hearingDevice->address
<< ", playback_started=" << hearingDevice->playback_started
<< ", accepting_audio=" << hearingDevice->accepting_audio;
if (hearingDevice->connecting_actively) {
// cancel pending direct connect
BTA_GATTC_CancelOpen(gatt_if, address, true);
}
// Removes all registrations for connection.
BTA_GATTC_CancelOpen(0, address, false);
// Inform the other side (if any) of this disconnection
std::vector<uint8_t> inform_disconn_state(
{CONTROL_POINT_OP_STATE_CHANGE, STATE_CHANGE_OTHER_SIDE_DISCONNECTED});
send_state_change_to_other_side(hearingDevice, inform_disconn_state);
DoDisconnectCleanUp(hearingDevice);
hearingDevices.Remove(address);
if (!connected) {
return;
}
callbacks->OnConnectionState(ConnectionState::DISCONNECTED, address);
for (const auto& device : hearingDevices.devices) {
if (device.accepting_audio) return;
}
LOG(INFO) << __func__ << ": No more (0/" << GetDeviceCount()
<< ") devices ready";
DoDisconnectAudioStop();
}
void OnGattDisconnected(uint16_t conn_id, tGATT_IF client_if,
RawAddress remote_bda) {
HearingDevice* hearingDevice = hearingDevices.FindByConnId(conn_id);
if (!hearingDevice) {
VLOG(2) << "Skipping unknown device disconnect, conn_id="
<< loghex(conn_id);
return;
}
VLOG(2) << __func__ << ": conn_id=" << loghex(conn_id)
<< ", remote_bda=" << remote_bda;
// Inform the other side (if any) of this disconnection
std::vector<uint8_t> inform_disconn_state(
{CONTROL_POINT_OP_STATE_CHANGE, STATE_CHANGE_OTHER_SIDE_DISCONNECTED});
send_state_change_to_other_side(hearingDevice, inform_disconn_state);
DoDisconnectCleanUp(hearingDevice);
// This is needed just for the first connection. After stack is restarted,
// code that loads device will add them to acceptlist.
BTA_GATTC_Open(gatt_if, hearingDevice->address, false, false);
callbacks->OnConnectionState(ConnectionState::DISCONNECTED, remote_bda);
for (const auto& device : hearingDevices.devices) {
if (device.accepting_audio) return;
}
LOG(INFO) << __func__ << ": No more (0/" << GetDeviceCount()
<< ") devices ready";
DoDisconnectAudioStop();
}
void DoDisconnectCleanUp(HearingDevice* hearingDevice) {
if (hearingDevice->connection_update_status != COMPLETED) {
LOG(INFO) << __func__ << ": connection update not completed. Current="
<< hearingDevice->connection_update_status
<< ", device=" << hearingDevice->address;
if (hearingDevice->connection_update_status == STARTED) {
OnConnectionUpdateComplete(hearingDevice->conn_id, NULL);
}
}
hearingDevice->connection_update_status = NONE;
if (hearingDevice->conn_id) {
BtaGattQueue::Clean(hearingDevice->conn_id);
BTA_GATTC_Close(hearingDevice->conn_id);
hearingDevice->conn_id = 0;
}
if (hearingDevice->gap_handle) {
GAP_ConnClose(hearingDevice->gap_handle);
hearingDevice->gap_handle = 0;
}
hearingDevice->accepting_audio = false;
LOG(INFO) << __func__ << ": device=" << hearingDevice->address
<< ", playback_started=" << hearingDevice->playback_started;
hearingDevice->playback_started = false;
hearingDevice->command_acked = false;
}
void DoDisconnectAudioStop() {
HearingAidAudioSource::Stop();
audio_running = false;
encoder_state_release();
current_volume = VOLUME_UNKNOWN;
}
void SetVolume(int8_t volume) override {
VLOG(2) << __func__ << ": " << +volume;
current_volume = volume;
for (HearingDevice& device : hearingDevices.devices) {
if (!device.accepting_audio) continue;
std::vector<uint8_t> volume_value({static_cast<unsigned char>(volume)});
BtaGattQueue::WriteCharacteristic(device.conn_id, device.volume_handle,
volume_value, GATT_WRITE_NO_RSP,
nullptr, nullptr);
}
}
void CleanUp() {
BTA_GATTC_AppDeregister(gatt_if);
for (HearingDevice& device : hearingDevices.devices) {
DoDisconnectCleanUp(&device);
}
hearingDevices.devices.clear();
encoder_state_release();
}
private:
uint8_t gatt_if;
uint8_t seq_counter;
/* current volume gain for the hearing aids*/
int8_t current_volume;
bluetooth::hearing_aid::HearingAidCallbacks* callbacks;
/* currently used codec */
uint8_t codec_in_use;
uint16_t default_data_interval_ms;
HearingDevices hearingDevices;
void find_server_changed_ccc_handle(uint16_t conn_id,
const gatt::Service* service) {
HearingDevice* hearingDevice = hearingDevices.FindByConnId(conn_id);
if (!hearingDevice) {
DVLOG(2) << "Skipping unknown device, conn_id=" << loghex(conn_id);
return;
}
for (const gatt::Characteristic& charac : service->characteristics) {
if (charac.uuid == Uuid::From16Bit(GATT_UUID_GATT_SRV_CHGD)) {
hearingDevice->service_changed_ccc_handle =
find_ccc_handle(conn_id, charac.value_handle);
if (!hearingDevice->service_changed_ccc_handle) {
LOG(ERROR) << __func__
<< ": cannot find service changed CCC descriptor";
continue;
}
LOG(INFO) << __func__ << " service_changed_ccc="
<< loghex(hearingDevice->service_changed_ccc_handle);
break;
}
}
}
// Find the handle for the client characteristics configuration of a given
// characteristics
uint16_t find_ccc_handle(uint16_t conn_id, uint16_t char_handle) {
const gatt::Characteristic* p_char =
BTA_GATTC_GetCharacteristic(conn_id, char_handle);
if (!p_char) {
LOG(WARNING) << __func__ << ": No such characteristic: " << char_handle;
return 0;
}
for (const gatt::Descriptor& desc : p_char->descriptors) {
if (desc.uuid == Uuid::From16Bit(GATT_UUID_CHAR_CLIENT_CONFIG))
return desc.handle;
}
return 0;
}
void send_state_change(HearingDevice* device, std::vector<uint8_t> payload) {
if (device->conn_id != 0) {
if (device->service_changed_rcvd) {
LOG(INFO)
<< __func__
<< ": service discover is in progress, skip send State Change cmd.";
return;
}
// Send the data packet
LOG(INFO) << __func__ << ": Send State Change. device=" << device->address
<< ", status=" << loghex(payload[1]);
BtaGattQueue::WriteCharacteristic(
device->conn_id, device->audio_control_point_handle, payload,
GATT_WRITE_NO_RSP, nullptr, nullptr);
}
}
void send_state_change_to_other_side(HearingDevice* this_side_device,
std::vector<uint8_t> payload) {
for (auto& device : hearingDevices.devices) {
if ((device.address == this_side_device->address) ||
(device.hi_sync_id != this_side_device->hi_sync_id)) {
continue;
}
send_state_change(&device, payload);
}
}
void check_and_do_rssi_read(HearingDevice* device) {
if (device->read_rssi_count > 0) {
device->num_intervals_since_last_rssi_read++;
if (device->num_intervals_since_last_rssi_read >= PERIOD_TO_READ_RSSI_IN_INTERVALS) {
device->num_intervals_since_last_rssi_read = 0;
VLOG(1) << __func__ << ": device=" << device->address;
BTM_ReadRSSI(device->address, read_rssi_cb);
}
}
}
};
void read_rssi_cb(void* p_void) {
tBTM_RSSI_RESULT* p_result = (tBTM_RSSI_RESULT*)p_void;
if (!p_result) return;
if ((instance) && (p_result->status == BTM_SUCCESS)) {
instance->OnReadRssiComplete(p_result->rem_bda, p_result->rssi);
}
}
void hearingaid_gattc_callback(tBTA_GATTC_EVT event, tBTA_GATTC* p_data) {
VLOG(2) << __func__ << " event = " << +event;
if (p_data == nullptr) return;
switch (event) {
case BTA_GATTC_DEREG_EVT:
break;
case BTA_GATTC_OPEN_EVT: {
if (!instance) return;
tBTA_GATTC_OPEN& o = p_data->open;
instance->OnGattConnected(o.status, o.conn_id, o.client_if, o.remote_bda,
o.transport, o.mtu);
break;
}
case BTA_GATTC_CLOSE_EVT: {
if (!instance) return;
tBTA_GATTC_CLOSE& c = p_data->close;
instance->OnGattDisconnected(c.conn_id, c.client_if, c.remote_bda);
} break;
case BTA_GATTC_SEARCH_CMPL_EVT:
if (!instance) return;
instance->OnServiceSearchComplete(p_data->search_cmpl.conn_id,
p_data->search_cmpl.status);
break;
case BTA_GATTC_NOTIF_EVT:
if (!instance) return;
if (!p_data->notify.is_notify || p_data->notify.len > GATT_MAX_ATTR_LEN) {
LOG(ERROR) << __func__ << ": rejected BTA_GATTC_NOTIF_EVT. is_notify="
<< p_data->notify.is_notify
<< ", len=" << p_data->notify.len;
break;
}
instance->OnNotificationEvent(p_data->notify.conn_id,
p_data->notify.handle, p_data->notify.len,
p_data->notify.value);
break;
case BTA_GATTC_ENC_CMPL_CB_EVT:
if (!instance) return;
instance->OnEncryptionComplete(p_data->enc_cmpl.remote_bda, true);
break;
case BTA_GATTC_CONN_UPDATE_EVT:
if (!instance) return;
instance->OnConnectionUpdateComplete(p_data->conn_update.conn_id, p_data);
break;
case BTA_GATTC_SRVC_CHG_EVT:
if (!instance) return;
instance->OnServiceChangeEvent(p_data->remote_bda);
break;
case BTA_GATTC_SRVC_DISC_DONE_EVT:
if (!instance) return;
instance->OnServiceDiscDoneEvent(p_data->service_changed.remote_bda);
break;
default:
break;
}
}
void encryption_callback(const RawAddress* address, tBT_TRANSPORT, void*,
tBTM_STATUS status) {
if (instance) {
instance->OnEncryptionComplete(*address,
status == BTM_SUCCESS ? true : false);
}
}
class HearingAidAudioReceiverImpl : public HearingAidAudioReceiver {
public:
void OnAudioDataReady(const std::vector<uint8_t>& data) override {
if (instance) instance->OnAudioDataReady(data);
}
void OnAudioSuspend(const std::function<void()>& stop_audio_ticks) override {
if (instance) instance->OnAudioSuspend(stop_audio_ticks);
}
void OnAudioResume(const std::function<void()>& start_audio_ticks) override {
if (instance) instance->OnAudioResume(start_audio_ticks);
}
};
HearingAidAudioReceiverImpl audioReceiverImpl;
} // namespace
void HearingAid::Initialize(
bluetooth::hearing_aid::HearingAidCallbacks* callbacks, Closure initCb) {
if (instance) {
LOG(ERROR) << "Already initialized!";
}
audioReceiver = &audioReceiverImpl;
instance = new HearingAidImpl(callbacks, initCb);
HearingAidAudioSource::Initialize();
}
bool HearingAid::IsHearingAidRunning() { return instance; }
HearingAid* HearingAid::Get() {
CHECK(instance);
return instance;
};
void HearingAid::AddFromStorage(const HearingDevice& dev_info,
uint16_t is_acceptlisted) {
if (!instance) {
LOG(ERROR) << "Not initialized yet";
}
instance->AddFromStorage(dev_info, is_acceptlisted);
};
int HearingAid::GetDeviceCount() {
if (!instance) {
LOG(INFO) << __func__ << ": Not initialized yet";
return 0;
}
return (instance->GetDeviceCount());
}
void HearingAid::CleanUp() {
// Must stop audio source to make sure it doesn't call any of callbacks on our
// soon to be null instance
HearingAidAudioSource::Stop();
HearingAidImpl* ptr = instance;
instance = nullptr;
HearingAidAudioSource::CleanUp();
ptr->CleanUp();
delete ptr;
};
void HearingAid::DebugDump(int fd) {
dprintf(fd, "Hearing Aid Manager:\n");
if (instance) instance->Dump(fd);
HearingAidAudioSource::DebugDump(fd);
dprintf(fd, "\n");
}