| /****************************************************************************** |
| * |
| * Copyright (C) 2014 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| #define LOG_TAG "bt_btm_ble" |
| |
| #include <base/bind.h> |
| #include <string.h> |
| #include <algorithm> |
| #include <vector> |
| |
| #include "bt_target.h" |
| |
| #include "bt_types.h" |
| #include "bt_utils.h" |
| #include "btm_ble_api.h" |
| #include "btm_int.h" |
| #include "btu.h" |
| #include "device/include/controller.h" |
| #include "hcidefs.h" |
| #include "hcimsgs.h" |
| |
| #define BTM_BLE_ADV_FILT_META_HDR_LENGTH 3 |
| #define BTM_BLE_ADV_FILT_FEAT_SELN_LEN 13 |
| #define BTM_BLE_ADV_FILT_TRACK_NUM 2 |
| |
| #define BTM_BLE_PF_SELECT_NONE 0 |
| |
| /* BLE meta vsc header: 1 bytes of sub_code, 1 byte of PCF action */ |
| #define BTM_BLE_META_HDR_LENGTH 3 |
| #define BTM_BLE_PF_FEAT_SEL_LEN 18 |
| #define BTM_BLE_PCF_ENABLE_LEN 2 |
| |
| #define BTM_BLE_META_ADDR_LEN 7 |
| #define BTM_BLE_META_UUID_LEN 40 |
| |
| #define BTM_BLE_PF_BIT_TO_MASK(x) (uint16_t)(1 << (x)) |
| |
| tBTM_BLE_ADV_FILTER_CB btm_ble_adv_filt_cb; |
| tBTM_BLE_VSC_CB cmn_ble_vsc_cb; |
| static const BD_ADDR na_bda = {0}; |
| |
| static uint8_t btm_ble_cs_update_pf_counter(tBTM_BLE_SCAN_COND_OP action, |
| uint8_t cond_type, |
| tBLE_BD_ADDR* p_bd_addr, |
| uint8_t num_available); |
| |
| #define BTM_BLE_SET_SCAN_PF_OPCODE(x, y) (((x) << 4) | (y)) |
| #define BTM_BLE_GET_SCAN_PF_SUBCODE(x) ((x) >> 4) |
| #define BTM_BLE_GET_SCAN_PF_ACTION(x) ((x)&0x0f) |
| #define BTM_BLE_INVALID_COUNTER 0xff |
| |
| /* length of each multi adv sub command */ |
| #define BTM_BLE_ADV_FILTER_ENB_LEN 3 |
| |
| /* length of each batch scan command */ |
| #define BTM_BLE_ADV_FILTER_CLEAR_LEN 3 |
| #define BTM_BLE_ADV_FILTER_LEN 2 |
| |
| #define BTM_BLE_ADV_FILT_CB_EVT_MASK 0xF0 |
| #define BTM_BLE_ADV_FILT_SUBCODE_MASK 0x0F |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_obtain_vsc_details |
| * |
| * Description This function obtains the VSC details |
| * |
| * Parameters |
| * |
| * Returns status |
| * |
| ******************************************************************************/ |
| tBTM_STATUS btm_ble_obtain_vsc_details() { |
| tBTM_STATUS st = BTM_SUCCESS; |
| |
| #if (BLE_VND_INCLUDED == TRUE) |
| BTM_BleGetVendorCapabilities(&cmn_ble_vsc_cb); |
| if (cmn_ble_vsc_cb.filter_support && 0 == cmn_ble_vsc_cb.max_filter) { |
| st = BTM_MODE_UNSUPPORTED; |
| return st; |
| } |
| #else |
| cmn_ble_vsc_cb.max_filter = BTM_BLE_MAX_FILTER_COUNTER; |
| #endif |
| return st; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_condtype_to_ocf |
| * |
| * Description Convert cond_type to OCF |
| * |
| * Returns Returns ocf value |
| * |
| ******************************************************************************/ |
| uint8_t btm_ble_condtype_to_ocf(uint8_t cond_type) { |
| uint8_t ocf = 0; |
| |
| switch (cond_type) { |
| case BTM_BLE_PF_ADDR_FILTER: |
| ocf = BTM_BLE_META_PF_ADDR; |
| break; |
| case BTM_BLE_PF_SRVC_UUID: |
| ocf = BTM_BLE_META_PF_UUID; |
| break; |
| case BTM_BLE_PF_SRVC_SOL_UUID: |
| ocf = BTM_BLE_META_PF_SOL_UUID; |
| break; |
| case BTM_BLE_PF_LOCAL_NAME: |
| ocf = BTM_BLE_META_PF_LOCAL_NAME; |
| break; |
| case BTM_BLE_PF_MANU_DATA: |
| ocf = BTM_BLE_META_PF_MANU_DATA; |
| break; |
| case BTM_BLE_PF_SRVC_DATA_PATTERN: |
| ocf = BTM_BLE_META_PF_SRVC_DATA; |
| break; |
| case BTM_BLE_PF_TYPE_ALL: |
| ocf = BTM_BLE_META_PF_ALL; |
| break; |
| default: |
| ocf = BTM_BLE_PF_TYPE_MAX; |
| break; |
| } |
| return ocf; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_ocf_to_condtype |
| * |
| * Description Convert OCF to cond type |
| * |
| * Returns Returns condtype value |
| * |
| ******************************************************************************/ |
| uint8_t btm_ble_ocf_to_condtype(uint8_t ocf) { |
| uint8_t cond_type = 0; |
| |
| switch (ocf) { |
| case BTM_BLE_META_PF_FEAT_SEL: |
| cond_type = BTM_BLE_META_PF_FEAT_SEL; |
| break; |
| case BTM_BLE_META_PF_ADDR: |
| cond_type = BTM_BLE_PF_ADDR_FILTER; |
| break; |
| case BTM_BLE_META_PF_UUID: |
| cond_type = BTM_BLE_PF_SRVC_UUID; |
| break; |
| case BTM_BLE_META_PF_SOL_UUID: |
| cond_type = BTM_BLE_PF_SRVC_SOL_UUID; |
| break; |
| case BTM_BLE_META_PF_LOCAL_NAME: |
| cond_type = BTM_BLE_PF_LOCAL_NAME; |
| break; |
| case BTM_BLE_META_PF_MANU_DATA: |
| cond_type = BTM_BLE_PF_MANU_DATA; |
| break; |
| case BTM_BLE_META_PF_SRVC_DATA: |
| cond_type = BTM_BLE_PF_SRVC_DATA_PATTERN; |
| break; |
| case BTM_BLE_META_PF_ALL: |
| cond_type = BTM_BLE_PF_TYPE_ALL; |
| break; |
| default: |
| cond_type = BTM_BLE_PF_TYPE_MAX; |
| break; |
| } |
| return cond_type; |
| } |
| |
| void btm_flt_update_cb(uint8_t expected_ocf, tBTM_BLE_PF_CFG_CBACK cb, |
| uint8_t* p, uint16_t evt_len) { |
| if (evt_len != 4) { |
| BTM_TRACE_ERROR("%s: bad length: %d", __func__, evt_len); |
| return; |
| } |
| |
| uint8_t status, op_subcode, action, num_avail; |
| STREAM_TO_UINT8(status, p); |
| STREAM_TO_UINT8(op_subcode, p); |
| STREAM_TO_UINT8(action, p); |
| STREAM_TO_UINT8(num_avail, p); |
| |
| if (expected_ocf != op_subcode) { |
| BTM_TRACE_ERROR("%s: Incorrect opcode: 0x%02x, expected: 0x%02x", __func__, |
| expected_ocf, op_subcode); |
| return; |
| } |
| |
| if (op_subcode == BTM_BLE_META_PF_FEAT_SEL) { |
| cb.Run(num_avail, action, status); |
| return; |
| } |
| |
| uint8_t cond_type = btm_ble_ocf_to_condtype(expected_ocf); |
| BTM_TRACE_DEBUG("%s: Recd: %d, %d, %d, %d, %d", __func__, op_subcode, |
| expected_ocf, action, status, num_avail); |
| if (HCI_SUCCESS == status) { |
| if (memcmp(&btm_ble_adv_filt_cb.cur_filter_target.bda, &na_bda, |
| BD_ADDR_LEN) == 0) |
| btm_ble_cs_update_pf_counter(action, cond_type, NULL, num_avail); |
| else |
| btm_ble_cs_update_pf_counter( |
| action, cond_type, &btm_ble_adv_filt_cb.cur_filter_target, num_avail); |
| } |
| |
| /* send ADV PF operation complete */ |
| btm_ble_adv_filt_cb.op_type = 0; |
| |
| cb.Run(num_avail, action, status); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_find_addr_filter_counter |
| * |
| * Description find the per bd address ADV payload filter counter by |
| * BD_ADDR. |
| * |
| * Returns pointer to the counter if found; NULL otherwise. |
| * |
| ******************************************************************************/ |
| tBTM_BLE_PF_COUNT* btm_ble_find_addr_filter_counter(tBLE_BD_ADDR* p_le_bda) { |
| uint8_t i; |
| tBTM_BLE_PF_COUNT* p_addr_filter = |
| &btm_ble_adv_filt_cb.p_addr_filter_count[1]; |
| |
| if (p_le_bda == NULL) return &btm_ble_adv_filt_cb.p_addr_filter_count[0]; |
| |
| for (i = 0; i < cmn_ble_vsc_cb.max_filter; i++, p_addr_filter++) { |
| if (p_addr_filter->in_use && |
| memcmp(p_le_bda->bda, p_addr_filter->bd_addr, BD_ADDR_LEN) == 0) { |
| return p_addr_filter; |
| } |
| } |
| return NULL; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_alloc_addr_filter_counter |
| * |
| * Description allocate the per device adv payload filter counter. |
| * |
| * Returns pointer to the counter if allocation succeed; NULL |
| * otherwise. |
| * |
| ******************************************************************************/ |
| tBTM_BLE_PF_COUNT* btm_ble_alloc_addr_filter_counter(BD_ADDR bd_addr) { |
| uint8_t i; |
| tBTM_BLE_PF_COUNT* p_addr_filter = |
| &btm_ble_adv_filt_cb.p_addr_filter_count[1]; |
| |
| for (i = 0; i < cmn_ble_vsc_cb.max_filter; i++, p_addr_filter++) { |
| if (memcmp(na_bda, p_addr_filter->bd_addr, BD_ADDR_LEN) == 0) { |
| memcpy(p_addr_filter->bd_addr, bd_addr, BD_ADDR_LEN); |
| p_addr_filter->in_use = true; |
| return p_addr_filter; |
| } |
| } |
| return NULL; |
| } |
| /******************************************************************************* |
| * |
| * Function btm_ble_dealloc_addr_filter_counter |
| * |
| * Description de-allocate the per device adv payload filter counter. |
| * |
| * Returns true if deallocation succeed; false otherwise. |
| * |
| ******************************************************************************/ |
| bool btm_ble_dealloc_addr_filter_counter(tBLE_BD_ADDR* p_bd_addr, |
| uint8_t filter_type) { |
| uint8_t i; |
| tBTM_BLE_PF_COUNT* p_addr_filter = |
| &btm_ble_adv_filt_cb.p_addr_filter_count[1]; |
| bool found = false; |
| |
| if (BTM_BLE_PF_TYPE_ALL == filter_type && NULL == p_bd_addr) |
| memset(&btm_ble_adv_filt_cb.p_addr_filter_count[0], 0, |
| sizeof(tBTM_BLE_PF_COUNT)); |
| |
| for (i = 0; i < cmn_ble_vsc_cb.max_filter; i++, p_addr_filter++) { |
| if ((p_addr_filter->in_use) && |
| (NULL == p_bd_addr || |
| (NULL != p_bd_addr && |
| memcmp(p_bd_addr->bda, p_addr_filter->bd_addr, BD_ADDR_LEN) == 0))) { |
| found = true; |
| memset(p_addr_filter, 0, sizeof(tBTM_BLE_PF_COUNT)); |
| |
| if (NULL != p_bd_addr) break; |
| } |
| } |
| return found; |
| } |
| |
| /** |
| * This function update(add,delete or clear) the adv local name filtering |
| * condition. |
| */ |
| void BTM_LE_PF_local_name(tBTM_BLE_SCAN_COND_OP action, |
| tBTM_BLE_PF_FILT_INDEX filt_index, |
| std::vector<uint8_t> name, tBTM_BLE_PF_CFG_CBACK cb) { |
| uint8_t len = BTM_BLE_ADV_FILT_META_HDR_LENGTH; |
| |
| uint8_t len_max = len + BTM_BLE_PF_STR_LEN_MAX; |
| uint8_t param[len_max]; |
| memset(param, 0, len_max); |
| |
| uint8_t* p = param; |
| UINT8_TO_STREAM(p, BTM_BLE_META_PF_LOCAL_NAME); |
| UINT8_TO_STREAM(p, action); |
| UINT8_TO_STREAM(p, filt_index); |
| |
| if (action != BTM_BLE_SCAN_COND_CLEAR) { |
| int size = std::min(name.size(), (size_t)BTM_BLE_PF_STR_LEN_MAX); |
| ARRAY_TO_STREAM(p, name.data(), size); |
| len += size; |
| } |
| |
| /* send local name filter */ |
| btu_hcif_send_cmd_with_cb( |
| FROM_HERE, HCI_BLE_ADV_FILTER_OCF, param, len, |
| base::Bind(&btm_flt_update_cb, BTM_BLE_META_PF_LOCAL_NAME, cb)); |
| |
| memset(&btm_ble_adv_filt_cb.cur_filter_target, 0, sizeof(tBLE_BD_ADDR)); |
| } |
| |
| /** |
| * this function update(add/remove) service data change filter. |
| */ |
| void BTM_LE_PF_srvc_data(tBTM_BLE_SCAN_COND_OP action, |
| tBTM_BLE_PF_FILT_INDEX filt_index) { |
| uint8_t num_avail = (action == BTM_BLE_SCAN_COND_ADD) ? 0 : 1; |
| |
| btm_ble_cs_update_pf_counter(action, BTM_BLE_PF_SRVC_DATA, nullptr, |
| num_avail); |
| } |
| |
| /** |
| * This function update(add,delete or clear) the adv manufacturer data filtering |
| * condition. |
| */ |
| void BTM_LE_PF_manu_data(tBTM_BLE_SCAN_COND_OP action, |
| tBTM_BLE_PF_FILT_INDEX filt_index, uint16_t company_id, |
| uint16_t company_id_mask, std::vector<uint8_t> data, |
| std::vector<uint8_t> data_mask, |
| tBTM_BLE_PF_CFG_CBACK cb) { |
| uint8_t len = BTM_BLE_ADV_FILT_META_HDR_LENGTH; |
| int len_max = len + BTM_BLE_PF_STR_LEN_MAX + BTM_BLE_PF_STR_LEN_MAX; |
| |
| uint8_t param[len_max]; |
| memset(param, 0, len_max); |
| |
| uint8_t* p = param; |
| UINT8_TO_STREAM(p, BTM_BLE_META_PF_MANU_DATA); |
| UINT8_TO_STREAM(p, action); |
| UINT8_TO_STREAM(p, filt_index); |
| |
| if (action != BTM_BLE_SCAN_COND_CLEAR) { |
| uint8_t size = std::min(data.size(), (size_t)(BTM_BLE_PF_STR_LEN_MAX - 2)); |
| |
| UINT16_TO_STREAM(p, company_id); |
| if (size > 0 && data_mask.size() != 0) { |
| ARRAY_TO_STREAM(p, data.data(), size); |
| len += size + 2; |
| } else |
| len += 2; |
| |
| if (company_id_mask != 0) { |
| UINT16_TO_STREAM(p, company_id_mask); |
| } else { |
| UINT16_TO_STREAM(p, (uint16_t)0xFFFF); |
| } |
| len += 2; |
| |
| if (size > 0 && data_mask.size() != 0) { |
| ARRAY_TO_STREAM(p, data_mask.data(), size); |
| len += (size); |
| } |
| |
| BTM_TRACE_DEBUG("Manuf data length: %d", len); |
| } |
| |
| btu_hcif_send_cmd_with_cb( |
| FROM_HERE, HCI_BLE_ADV_FILTER_OCF, param, len, |
| base::Bind(&btm_flt_update_cb, BTM_BLE_META_PF_MANU_DATA, cb)); |
| |
| memset(&btm_ble_adv_filt_cb.cur_filter_target, 0, sizeof(tBLE_BD_ADDR)); |
| } |
| |
| /** |
| * This function update(add,delete or clear) the service data filtering |
| * condition. |
| **/ |
| void BTM_LE_PF_srvc_data_pattern(tBTM_BLE_SCAN_COND_OP action, |
| tBTM_BLE_PF_FILT_INDEX filt_index, |
| std::vector<uint8_t> data, |
| std::vector<uint8_t> data_mask, |
| tBTM_BLE_PF_CFG_CBACK cb) { |
| uint8_t len = BTM_BLE_ADV_FILT_META_HDR_LENGTH; |
| int len_max = len + BTM_BLE_PF_STR_LEN_MAX + BTM_BLE_PF_STR_LEN_MAX; |
| |
| uint8_t param[len_max]; |
| memset(param, 0, len_max); |
| |
| uint8_t* p = param; |
| UINT8_TO_STREAM(p, BTM_BLE_META_PF_SRVC_DATA); |
| UINT8_TO_STREAM(p, action); |
| UINT8_TO_STREAM(p, filt_index); |
| |
| if (action != BTM_BLE_SCAN_COND_CLEAR) { |
| uint8_t size = std::min(data.size(), (size_t)(BTM_BLE_PF_STR_LEN_MAX - 2)); |
| |
| if (size > 0) { |
| ARRAY_TO_STREAM(p, data.data(), size); |
| len += size; |
| ARRAY_TO_STREAM(p, data_mask.data(), size); |
| len += size; |
| } |
| } |
| |
| btu_hcif_send_cmd_with_cb( |
| FROM_HERE, HCI_BLE_ADV_FILTER_OCF, param, len, |
| base::Bind(&btm_flt_update_cb, BTM_BLE_META_PF_SRVC_DATA, cb)); |
| |
| memset(&btm_ble_adv_filt_cb.cur_filter_target, 0, sizeof(tBLE_BD_ADDR)); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_cs_update_pf_counter |
| * |
| * Description this function is to update the adv data payload filter |
| * counter |
| * |
| * Returns current number of the counter; BTM_BLE_INVALID_COUNTER if |
| * counter update failed. |
| * |
| ******************************************************************************/ |
| uint8_t btm_ble_cs_update_pf_counter(tBTM_BLE_SCAN_COND_OP action, |
| uint8_t cond_type, tBLE_BD_ADDR* p_bd_addr, |
| uint8_t num_available) { |
| tBTM_BLE_PF_COUNT* p_addr_filter = NULL; |
| uint8_t* p_counter = NULL; |
| |
| btm_ble_obtain_vsc_details(); |
| |
| if (cond_type > BTM_BLE_PF_TYPE_ALL) { |
| BTM_TRACE_ERROR("unknown PF filter condition type %d", cond_type); |
| return BTM_BLE_INVALID_COUNTER; |
| } |
| |
| /* for these three types of filter, always generic */ |
| if (BTM_BLE_PF_ADDR_FILTER == cond_type || |
| BTM_BLE_PF_MANU_DATA == cond_type || BTM_BLE_PF_LOCAL_NAME == cond_type || |
| BTM_BLE_PF_SRVC_DATA_PATTERN == cond_type) |
| p_bd_addr = NULL; |
| |
| if ((p_addr_filter = btm_ble_find_addr_filter_counter(p_bd_addr)) == NULL && |
| BTM_BLE_SCAN_COND_ADD == action) { |
| p_addr_filter = btm_ble_alloc_addr_filter_counter(p_bd_addr->bda); |
| } |
| |
| if (NULL != p_addr_filter) { |
| /* all filter just cleared */ |
| if ((BTM_BLE_PF_TYPE_ALL == cond_type && |
| BTM_BLE_SCAN_COND_CLEAR == action) || |
| /* or bd address filter been deleted */ |
| (BTM_BLE_PF_ADDR_FILTER == cond_type && |
| (BTM_BLE_SCAN_COND_DELETE == action || |
| BTM_BLE_SCAN_COND_CLEAR == action))) { |
| btm_ble_dealloc_addr_filter_counter(p_bd_addr, cond_type); |
| } |
| /* if not feature selection, update new addition/reduction of the filter |
| counter */ |
| else if (cond_type != BTM_BLE_PF_TYPE_ALL) { |
| p_counter = p_addr_filter->pf_counter; |
| if (num_available > 0) p_counter[cond_type] += 1; |
| |
| BTM_TRACE_DEBUG("counter = %d, maxfilt = %d, num_avbl=%d", |
| p_counter[cond_type], cmn_ble_vsc_cb.max_filter, |
| num_available); |
| return p_counter[cond_type]; |
| } |
| } else { |
| BTM_TRACE_ERROR("no matching filter counter found"); |
| } |
| /* no matching filter located and updated */ |
| return BTM_BLE_INVALID_COUNTER; |
| } |
| |
| /** |
| * This function updates the address filter of adv. |
| */ |
| void BTM_LE_PF_addr_filter(tBTM_BLE_SCAN_COND_OP action, |
| tBTM_BLE_PF_FILT_INDEX filt_index, tBLE_BD_ADDR addr, |
| tBTM_BLE_PF_CFG_CBACK cb) { |
| const uint8_t len = BTM_BLE_ADV_FILT_META_HDR_LENGTH + BTM_BLE_META_ADDR_LEN; |
| |
| uint8_t param[len]; |
| memset(param, 0, len); |
| |
| uint8_t* p = param; |
| UINT8_TO_STREAM(p, BTM_BLE_META_PF_ADDR); |
| UINT8_TO_STREAM(p, action); |
| UINT8_TO_STREAM(p, filt_index); |
| |
| if (action != BTM_BLE_SCAN_COND_CLEAR) { |
| BDADDR_TO_STREAM(p, addr.bda); |
| UINT8_TO_STREAM(p, addr.type); |
| } |
| |
| /* send address filter */ |
| btu_hcif_send_cmd_with_cb( |
| FROM_HERE, HCI_BLE_ADV_FILTER_OCF, param, len, |
| base::Bind(&btm_flt_update_cb, BTM_BLE_META_PF_ADDR, cb)); |
| |
| memset(&btm_ble_adv_filt_cb.cur_filter_target, 0, sizeof(tBLE_BD_ADDR)); |
| } |
| |
| /** |
| * This function updates(adds, deletes or clears) the service UUID filter. |
| */ |
| void BTM_LE_PF_uuid_filter(tBTM_BLE_SCAN_COND_OP action, |
| tBTM_BLE_PF_FILT_INDEX filt_index, |
| tBTM_BLE_PF_COND_TYPE filter_type, tBT_UUID uuid, |
| tBTM_BLE_PF_LOGIC_TYPE cond_logic, |
| tBTM_BLE_PF_COND_MASK* p_uuid_mask, |
| tBTM_BLE_PF_CFG_CBACK cb) { |
| uint8_t evt_type; |
| |
| if (BTM_BLE_PF_SRVC_UUID == filter_type) { |
| evt_type = BTM_BLE_META_PF_UUID; |
| } else { |
| evt_type = BTM_BLE_META_PF_SOL_UUID; |
| } |
| |
| uint8_t len = BTM_BLE_ADV_FILT_META_HDR_LENGTH; |
| uint8_t max_len = len + BTM_BLE_META_UUID_LEN; |
| uint8_t param[max_len]; |
| memset(param, 0, max_len); |
| uint8_t* p = param; |
| |
| UINT8_TO_STREAM(p, evt_type); |
| UINT8_TO_STREAM(p, action); |
| UINT8_TO_STREAM(p, filt_index); |
| |
| if (action != BTM_BLE_SCAN_COND_CLEAR) { |
| if (uuid.len == LEN_UUID_16) { |
| UINT16_TO_STREAM(p, uuid.uu.uuid16); |
| len += LEN_UUID_16; |
| } else if (uuid.len == LEN_UUID_32) { |
| UINT32_TO_STREAM(p, uuid.uu.uuid32); |
| len += LEN_UUID_32; |
| } else if (uuid.len == LEN_UUID_128) { |
| ARRAY_TO_STREAM(p, uuid.uu.uuid128, LEN_UUID_128); |
| len += LEN_UUID_128; |
| } else { |
| BTM_TRACE_ERROR("illegal UUID length: %d", uuid.len); |
| cb.Run(0, BTM_BLE_PF_CONFIG, 1 /*BTA_FAILURE*/); |
| return; |
| } |
| |
| if (p_uuid_mask) { |
| if (uuid.len == LEN_UUID_16) { |
| UINT16_TO_STREAM(p, p_uuid_mask->uuid16_mask); |
| len += LEN_UUID_16; |
| } else if (uuid.len == LEN_UUID_32) { |
| UINT32_TO_STREAM(p, p_uuid_mask->uuid32_mask); |
| len += LEN_UUID_32; |
| } else if (uuid.len == LEN_UUID_128) { |
| ARRAY_TO_STREAM(p, p_uuid_mask->uuid128_mask, LEN_UUID_128); |
| len += LEN_UUID_128; |
| } |
| } else { |
| memset(p, 0xff, uuid.len); |
| len += uuid.len; |
| } |
| } |
| |
| /* send UUID filter update */ |
| btu_hcif_send_cmd_with_cb(FROM_HERE, HCI_BLE_ADV_FILTER_OCF, param, len, |
| base::Bind(&btm_flt_update_cb, evt_type, cb)); |
| memset(&btm_ble_adv_filt_cb.cur_filter_target, 0, sizeof(tBLE_BD_ADDR)); |
| } |
| |
| /** |
| * all adv payload filter by de-selecting all the adv pf feature bits |
| */ |
| void BTM_LE_PF_clear(tBTM_BLE_PF_FILT_INDEX filt_index, |
| tBTM_BLE_PF_CFG_CBACK cb) { |
| /* clear the general filter entry */ |
| { |
| tBTM_BLE_PF_CFG_CBACK fDoNothing; |
| |
| /* clear manufactuer data filter */ |
| BTM_LE_PF_manu_data(BTM_BLE_SCAN_COND_CLEAR, filt_index, 0, 0, {}, {}, |
| fDoNothing); |
| |
| /* clear local name filter */ |
| BTM_LE_PF_local_name(BTM_BLE_SCAN_COND_CLEAR, filt_index, {}, fDoNothing); |
| |
| /* update the counter for service data */ |
| BTM_LE_PF_srvc_data(BTM_BLE_SCAN_COND_CLEAR, filt_index); |
| |
| /* clear UUID filter */ |
| BTM_LE_PF_uuid_filter(BTM_BLE_SCAN_COND_CLEAR, filt_index, |
| BTM_BLE_PF_SRVC_UUID, {}, 0, nullptr, fDoNothing); |
| |
| BTM_LE_PF_uuid_filter(BTM_BLE_SCAN_COND_CLEAR, filt_index, |
| BTM_BLE_PF_SRVC_SOL_UUID, {}, 0, nullptr, fDoNothing); |
| |
| /* clear service data filter */ |
| BTM_LE_PF_srvc_data_pattern(BTM_BLE_SCAN_COND_CLEAR, filt_index, {}, {}, |
| fDoNothing); |
| } |
| |
| uint8_t len = BTM_BLE_ADV_FILT_META_HDR_LENGTH + BTM_BLE_PF_FEAT_SEL_LEN; |
| uint8_t param[len]; |
| memset(param, 0, len); |
| |
| uint8_t* p = param; |
| |
| /* select feature based on control block settings */ |
| UINT8_TO_STREAM(p, BTM_BLE_META_PF_FEAT_SEL); |
| UINT8_TO_STREAM(p, BTM_BLE_SCAN_COND_CLEAR); |
| UINT8_TO_STREAM(p, filt_index); |
| /* set PCF selection */ |
| UINT32_TO_STREAM(p, BTM_BLE_PF_SELECT_NONE); |
| /* set logic condition as OR as default */ |
| UINT8_TO_STREAM(p, BTM_BLE_PF_LOGIC_OR); |
| |
| btu_hcif_send_cmd_with_cb( |
| FROM_HERE, HCI_BLE_ADV_FILTER_OCF, param, len, |
| base::Bind(&btm_flt_update_cb, BTM_BLE_META_PF_FEAT_SEL, cb)); |
| |
| memset(&btm_ble_adv_filt_cb.cur_filter_target, 0, sizeof(tBLE_BD_ADDR)); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTM_BleAdvFilterParamSetup |
| * |
| * Description This function is called to setup the adv data payload filter |
| * condition. |
| * |
| * Parameters action - Type of action to be performed |
| * filt_index - Filter index |
| * p_filt_params - Filter parameters |
| * cb - Callback |
| * |
| ******************************************************************************/ |
| void BTM_BleAdvFilterParamSetup( |
| int action, tBTM_BLE_PF_FILT_INDEX filt_index, |
| std::unique_ptr<btgatt_filt_param_setup_t> p_filt_params, |
| tBTM_BLE_PF_PARAM_CB cb) { |
| tBTM_BLE_PF_COUNT* p_bda_filter = NULL; |
| uint8_t len = BTM_BLE_ADV_FILT_META_HDR_LENGTH + |
| BTM_BLE_ADV_FILT_FEAT_SELN_LEN + BTM_BLE_ADV_FILT_TRACK_NUM; |
| uint8_t param[len], *p; |
| |
| if (BTM_SUCCESS != btm_ble_obtain_vsc_details()) { |
| cb.Run(0, BTM_BLE_PF_ENABLE, 1 /* BTA_FAILURE */); |
| return; |
| } |
| |
| p = param; |
| memset(param, 0, len); |
| BTM_TRACE_EVENT("%s", __func__); |
| |
| if (BTM_BLE_SCAN_COND_ADD == action) { |
| p_bda_filter = btm_ble_find_addr_filter_counter(nullptr); |
| if (NULL == p_bda_filter) { |
| BTM_TRACE_ERROR("BD Address not found!"); |
| cb.Run(0, BTM_BLE_PF_ENABLE, 1 /* BTA_FAILURE */); |
| return; |
| } |
| |
| BTM_TRACE_DEBUG("%s : Feat mask:%d", __func__, p_filt_params->feat_seln); |
| /* select feature based on control block settings */ |
| UINT8_TO_STREAM(p, BTM_BLE_META_PF_FEAT_SEL); |
| UINT8_TO_STREAM(p, BTM_BLE_SCAN_COND_ADD); |
| |
| /* Filter index */ |
| UINT8_TO_STREAM(p, filt_index); |
| |
| /* set PCF selection */ |
| UINT16_TO_STREAM(p, p_filt_params->feat_seln); |
| /* set logic type */ |
| UINT16_TO_STREAM(p, p_filt_params->list_logic_type); |
| /* set logic condition */ |
| UINT8_TO_STREAM(p, p_filt_params->filt_logic_type); |
| /* set RSSI high threshold */ |
| UINT8_TO_STREAM(p, p_filt_params->rssi_high_thres); |
| /* set delivery mode */ |
| UINT8_TO_STREAM(p, p_filt_params->dely_mode); |
| |
| if (0x01 == p_filt_params->dely_mode) { |
| /* set onfound timeout */ |
| UINT16_TO_STREAM(p, p_filt_params->found_timeout); |
| /* set onfound timeout count*/ |
| UINT8_TO_STREAM(p, p_filt_params->found_timeout_cnt); |
| /* set RSSI low threshold */ |
| UINT8_TO_STREAM(p, p_filt_params->rssi_low_thres); |
| /* set onlost timeout */ |
| UINT16_TO_STREAM(p, p_filt_params->lost_timeout); |
| /* set num_of_track_entries for firmware greater than L-release version */ |
| if (cmn_ble_vsc_cb.version_supported > BTM_VSC_CHIP_CAPABILITY_L_VERSION) |
| UINT16_TO_STREAM(p, p_filt_params->num_of_tracking_entries); |
| } |
| |
| if (cmn_ble_vsc_cb.version_supported == BTM_VSC_CHIP_CAPABILITY_L_VERSION) |
| len = BTM_BLE_ADV_FILT_META_HDR_LENGTH + BTM_BLE_ADV_FILT_FEAT_SELN_LEN; |
| else |
| len = BTM_BLE_ADV_FILT_META_HDR_LENGTH + BTM_BLE_ADV_FILT_FEAT_SELN_LEN + |
| BTM_BLE_ADV_FILT_TRACK_NUM; |
| |
| btu_hcif_send_cmd_with_cb( |
| FROM_HERE, HCI_BLE_ADV_FILTER_OCF, param, len, |
| base::Bind(&btm_flt_update_cb, BTM_BLE_META_PF_FEAT_SEL, cb)); |
| } else if (BTM_BLE_SCAN_COND_DELETE == action) { |
| /* select feature based on control block settings */ |
| UINT8_TO_STREAM(p, BTM_BLE_META_PF_FEAT_SEL); |
| UINT8_TO_STREAM(p, BTM_BLE_SCAN_COND_DELETE); |
| /* Filter index */ |
| UINT8_TO_STREAM(p, filt_index); |
| |
| btu_hcif_send_cmd_with_cb( |
| FROM_HERE, HCI_BLE_ADV_FILTER_OCF, param, |
| (uint8_t)(BTM_BLE_ADV_FILT_META_HDR_LENGTH), |
| base::Bind(&btm_flt_update_cb, BTM_BLE_META_PF_FEAT_SEL, cb)); |
| } else if (BTM_BLE_SCAN_COND_CLEAR == action) { |
| /* Deallocate all filters here */ |
| btm_ble_dealloc_addr_filter_counter(NULL, BTM_BLE_PF_TYPE_ALL); |
| |
| /* select feature based on control block settings */ |
| UINT8_TO_STREAM(p, BTM_BLE_META_PF_FEAT_SEL); |
| UINT8_TO_STREAM(p, BTM_BLE_SCAN_COND_CLEAR); |
| |
| btu_hcif_send_cmd_with_cb( |
| FROM_HERE, HCI_BLE_ADV_FILTER_OCF, param, |
| (uint8_t)(BTM_BLE_ADV_FILT_META_HDR_LENGTH - 1), |
| base::Bind(&btm_flt_update_cb, BTM_BLE_META_PF_FEAT_SEL, cb)); |
| } |
| } |
| |
| void enable_cmpl_cback(tBTM_BLE_PF_STATUS_CBACK p_stat_cback, uint8_t* p, |
| uint16_t evt_len) { |
| uint8_t status, op_subcode, action; |
| |
| if (evt_len != 3) { |
| BTM_TRACE_ERROR("%s: APCF callback length = %d", __func__, evt_len); |
| return; |
| } |
| |
| STREAM_TO_UINT8(status, p); |
| STREAM_TO_UINT8(op_subcode, p); |
| STREAM_TO_UINT8(action, p); |
| |
| if (op_subcode != BTM_BLE_META_PF_ENABLE) { |
| BTM_TRACE_ERROR("%s :bad subcode: 0x%02x", __func__, op_subcode); |
| return; |
| } |
| |
| p_stat_cback.Run(action, status); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTM_BleEnableDisableFilterFeature |
| * |
| * Description This function is called to enable / disable the APCF feature |
| * |
| * Parameters enable: enable or disable the filter condition |
| * p_stat_cback - Status callback pointer |
| * |
| ******************************************************************************/ |
| void BTM_BleEnableDisableFilterFeature(uint8_t enable, |
| tBTM_BLE_PF_STATUS_CBACK p_stat_cback) { |
| if (BTM_SUCCESS != btm_ble_obtain_vsc_details()) { |
| if (p_stat_cback) p_stat_cback.Run(BTM_BLE_PF_ENABLE, 1 /* BTA_FAILURE */); |
| return; |
| } |
| |
| uint8_t param[20]; |
| memset(param, 0, 20); |
| |
| uint8_t* p = param; |
| UINT8_TO_STREAM(p, BTM_BLE_META_PF_ENABLE); |
| UINT8_TO_STREAM(p, enable); |
| |
| btu_hcif_send_cmd_with_cb(FROM_HERE, HCI_BLE_ADV_FILTER_OCF, param, |
| BTM_BLE_PCF_ENABLE_LEN, |
| base::Bind(&enable_cmpl_cback, p_stat_cback)); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_adv_filter_init |
| * |
| * Description This function initializes the adv filter control block |
| * |
| * Parameters |
| * |
| * Returns status |
| * |
| ******************************************************************************/ |
| void btm_ble_adv_filter_init(void) { |
| memset(&btm_ble_adv_filt_cb, 0, sizeof(tBTM_BLE_ADV_FILTER_CB)); |
| if (BTM_SUCCESS != btm_ble_obtain_vsc_details()) return; |
| |
| if (cmn_ble_vsc_cb.max_filter > 0) { |
| btm_ble_adv_filt_cb.p_addr_filter_count = (tBTM_BLE_PF_COUNT*)osi_malloc( |
| sizeof(tBTM_BLE_PF_COUNT) * cmn_ble_vsc_cb.max_filter); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_ble_adv_filter_cleanup |
| * |
| * Description This function de-initializes the adv filter control block |
| * |
| * Parameters |
| * |
| * Returns status |
| * |
| ******************************************************************************/ |
| void btm_ble_adv_filter_cleanup(void) { |
| osi_free_and_reset((void**)&btm_ble_adv_filt_cb.p_addr_filter_count); |
| } |
