blob: 456ba60f16fcf612c1e77e1baeba4020cbcab5de [file] [log] [blame]
/*
* Copyright 2019 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "a2dp_encoding.h"
#include "client_interface.h"
#include "codec_status.h"
#include "btif_a2dp_source.h"
#include "btif_av.h"
#include "btif_av_co.h"
#include "btif_hf.h"
#include "osi/include/properties.h"
namespace {
using ::bluetooth::audio::AudioCapabilities;
using ::bluetooth::audio::AudioConfiguration;
using ::bluetooth::audio::BitsPerSample;
using ::bluetooth::audio::BluetoothAudioCtrlAck;
using ::bluetooth::audio::ChannelMode;
using ::bluetooth::audio::PcmParameters;
using ::bluetooth::audio::SampleRate;
using ::bluetooth::audio::SessionType;
using ::bluetooth::audio::BluetoothAudioClientInterface;
using ::bluetooth::audio::codec::A2dpAacToHalConfig;
using ::bluetooth::audio::codec::A2dpAptxToHalConfig;
using ::bluetooth::audio::codec::A2dpCodecToHalBitsPerSample;
using ::bluetooth::audio::codec::A2dpCodecToHalChannelMode;
using ::bluetooth::audio::codec::A2dpCodecToHalSampleRate;
using ::bluetooth::audio::codec::A2dpLdacToHalConfig;
using ::bluetooth::audio::codec::A2dpSbcToHalConfig;
using ::bluetooth::audio::codec::CodecConfiguration;
BluetoothAudioCtrlAck a2dp_ack_to_bt_audio_ctrl_ack(tA2DP_CTRL_ACK ack);
// Provide call-in APIs for the Bluetooth Audio HAL
class A2dpTransport : public ::bluetooth::audio::IBluetoothTransportInstance {
public:
A2dpTransport(SessionType sessionType)
: IBluetoothTransportInstance(sessionType, {}),
total_bytes_read_(0),
data_position_({}) {
a2dp_pending_cmd_ = A2DP_CTRL_CMD_NONE;
remote_delay_report_ = 0;
}
BluetoothAudioCtrlAck StartRequest() override {
// Check if a previous request is not finished
if (a2dp_pending_cmd_ == A2DP_CTRL_CMD_START) {
LOG(INFO) << __func__ << ": A2DP_CTRL_CMD_START in progress";
return a2dp_ack_to_bt_audio_ctrl_ack(A2DP_CTRL_ACK_PENDING);
} else if (a2dp_pending_cmd_ != A2DP_CTRL_CMD_NONE) {
LOG(WARNING) << __func__ << ": busy in pending_cmd=" << a2dp_pending_cmd_;
return a2dp_ack_to_bt_audio_ctrl_ack(A2DP_CTRL_ACK_FAILURE);
}
// Don't send START request to stack while we are in a call
if (!bluetooth::headset::IsCallIdle()) {
LOG(ERROR) << __func__ << ": call state is busy";
return a2dp_ack_to_bt_audio_ctrl_ack(A2DP_CTRL_ACK_INCALL_FAILURE);
}
if (btif_av_stream_started_ready()) {
// Already started, ACK back immediately.
return a2dp_ack_to_bt_audio_ctrl_ack(A2DP_CTRL_ACK_SUCCESS);
}
if (btif_av_stream_ready()) {
/*
* Post start event and wait for audio path to open.
* If we are the source, the ACK will be sent after the start
* procedure is completed, othewise send it now.
*/
a2dp_pending_cmd_ = A2DP_CTRL_CMD_START;
btif_av_stream_start();
if (btif_av_get_peer_sep() != AVDT_TSEP_SRC) {
LOG(INFO) << __func__ << ": accepted";
return a2dp_ack_to_bt_audio_ctrl_ack(A2DP_CTRL_ACK_PENDING);
}
a2dp_pending_cmd_ = A2DP_CTRL_CMD_NONE;
return a2dp_ack_to_bt_audio_ctrl_ack(A2DP_CTRL_ACK_SUCCESS);
}
LOG(ERROR) << __func__ << ": AV stream is not ready to start";
return a2dp_ack_to_bt_audio_ctrl_ack(A2DP_CTRL_ACK_FAILURE);
}
BluetoothAudioCtrlAck SuspendRequest() override {
// Previous request is not finished
if (a2dp_pending_cmd_ == A2DP_CTRL_CMD_SUSPEND) {
LOG(INFO) << __func__ << ": A2DP_CTRL_CMD_SUSPEND in progress";
return a2dp_ack_to_bt_audio_ctrl_ack(A2DP_CTRL_ACK_PENDING);
} else if (a2dp_pending_cmd_ != A2DP_CTRL_CMD_NONE) {
LOG(WARNING) << __func__ << ": busy in pending_cmd=" << a2dp_pending_cmd_;
return a2dp_ack_to_bt_audio_ctrl_ack(A2DP_CTRL_ACK_FAILURE);
}
// Local suspend
if (btif_av_stream_started_ready()) {
LOG(INFO) << __func__ << ": accepted";
a2dp_pending_cmd_ = A2DP_CTRL_CMD_SUSPEND;
btif_av_stream_suspend();
return BluetoothAudioCtrlAck::PENDING;
}
/* If we are not in started state, just ack back ok and let
* audioflinger close the channel. This can happen if we are
* remotely suspended, clear REMOTE SUSPEND flag.
*/
btif_av_clear_remote_suspend_flag();
return a2dp_ack_to_bt_audio_ctrl_ack(A2DP_CTRL_ACK_SUCCESS);
}
void StopRequest() override {
if (btif_av_get_peer_sep() == AVDT_TSEP_SNK &&
!btif_av_stream_started_ready()) {
return;
}
LOG(INFO) << __func__ << ": handling";
a2dp_pending_cmd_ = A2DP_CTRL_CMD_STOP;
btif_av_stream_stop(RawAddress::kEmpty);
}
bool GetPresentationPosition(uint64_t* remote_delay_report_ns,
uint64_t* total_bytes_read,
timespec* data_position) override {
*remote_delay_report_ns = remote_delay_report_ * 100000u;
*total_bytes_read = total_bytes_read_;
*data_position = data_position_;
VLOG(2) << __func__ << ": delay=" << remote_delay_report_
<< "/10ms, data=" << total_bytes_read_
<< " byte(s), timestamp=" << data_position_.tv_sec << "."
<< data_position_.tv_nsec << "s";
return true;
}
void MetadataChanged(const source_metadata_t& source_metadata) override {
auto track_count = source_metadata.track_count;
auto tracks = source_metadata.tracks;
VLOG(1) << __func__ << ": " << track_count << " track(s) received";
while (track_count) {
VLOG(2) << __func__ << ": usage=" << tracks->usage
<< ", content_type=" << tracks->content_type
<< ", gain=" << tracks->gain;
--track_count;
++tracks;
}
}
tA2DP_CTRL_CMD GetPendingCmd() const { return a2dp_pending_cmd_; }
void ResetPendingCmd() { a2dp_pending_cmd_ = A2DP_CTRL_CMD_NONE; }
void ResetPresentationPosition() override {
remote_delay_report_ = 0;
total_bytes_read_ = 0;
data_position_ = {};
}
void LogBytesRead(size_t bytes_read) override {
if (bytes_read != 0) {
total_bytes_read_ += bytes_read;
clock_gettime(CLOCK_MONOTONIC, &data_position_);
}
}
// delay reports from AVDTP is based on 1/10 ms (100us)
void SetRemoteDelay(uint16_t delay_report) {
remote_delay_report_ = delay_report;
}
private:
static tA2DP_CTRL_CMD a2dp_pending_cmd_;
static uint16_t remote_delay_report_;
uint64_t total_bytes_read_;
timespec data_position_;
};
tA2DP_CTRL_CMD A2dpTransport::a2dp_pending_cmd_ = A2DP_CTRL_CMD_NONE;
uint16_t A2dpTransport::remote_delay_report_ = 0;
// Common interface to call-out into Bluetooth Audio HAL
BluetoothAudioClientInterface* software_hal_interface = nullptr;
BluetoothAudioClientInterface* offloading_hal_interface = nullptr;
BluetoothAudioClientInterface* active_hal_interface = nullptr;
// Save the value if the remote reports its delay before this interface is
// initialized
uint16_t remote_delay = 0;
bool btaudio_a2dp_disabled = false;
bool is_configured = false;
BluetoothAudioCtrlAck a2dp_ack_to_bt_audio_ctrl_ack(tA2DP_CTRL_ACK ack) {
switch (ack) {
case A2DP_CTRL_ACK_SUCCESS:
return BluetoothAudioCtrlAck::SUCCESS_FINISHED;
case A2DP_CTRL_ACK_PENDING:
return BluetoothAudioCtrlAck::PENDING;
case A2DP_CTRL_ACK_INCALL_FAILURE:
return BluetoothAudioCtrlAck::FAILURE_BUSY;
case A2DP_CTRL_ACK_DISCONNECT_IN_PROGRESS:
return BluetoothAudioCtrlAck::FAILURE_DISCONNECTING;
case A2DP_CTRL_ACK_UNSUPPORTED: /* Offloading but resource failure */
return BluetoothAudioCtrlAck::FAILURE_UNSUPPORTED;
case A2DP_CTRL_ACK_FAILURE:
return BluetoothAudioCtrlAck::FAILURE;
default:
return BluetoothAudioCtrlAck::FAILURE;
}
}
bool a2dp_get_selected_hal_codec_config(CodecConfiguration* codec_config) {
A2dpCodecConfig* a2dp_config = bta_av_get_a2dp_current_codec();
if (a2dp_config == nullptr) {
LOG(WARNING) << __func__ << ": failure to get A2DP codec config";
*codec_config = ::bluetooth::audio::codec::kInvalidCodecConfiguration;
return false;
}
btav_a2dp_codec_config_t current_codec = a2dp_config->getCodecConfig();
switch (current_codec.codec_type) {
case BTAV_A2DP_CODEC_INDEX_SOURCE_SBC:
[[fallthrough]];
case BTAV_A2DP_CODEC_INDEX_SINK_SBC: {
if (!A2dpSbcToHalConfig(codec_config, a2dp_config)) {
return false;
}
break;
}
case BTAV_A2DP_CODEC_INDEX_SOURCE_AAC:
[[fallthrough]];
case BTAV_A2DP_CODEC_INDEX_SINK_AAC: {
if (!A2dpAacToHalConfig(codec_config, a2dp_config)) {
return false;
}
break;
}
case BTAV_A2DP_CODEC_INDEX_SOURCE_APTX:
[[fallthrough]];
case BTAV_A2DP_CODEC_INDEX_SOURCE_APTX_HD: {
if (!A2dpAptxToHalConfig(codec_config, a2dp_config)) {
return false;
}
break;
}
case BTAV_A2DP_CODEC_INDEX_SOURCE_LDAC: {
if (!A2dpLdacToHalConfig(codec_config, a2dp_config)) {
return false;
}
break;
}
case BTAV_A2DP_CODEC_INDEX_MAX:
[[fallthrough]];
default:
LOG(ERROR) << __func__
<< ": Unknown codec_type=" << current_codec.codec_type;
*codec_config = ::bluetooth::audio::codec::kInvalidCodecConfiguration;
return false;
}
codec_config->encodedAudioBitrate = a2dp_config->getTrackBitRate();
// Obtain the MTU
RawAddress peer_addr = btif_av_source_active_peer();
tA2DP_ENCODER_INIT_PEER_PARAMS peer_param;
bta_av_co_get_peer_params(peer_addr, &peer_param);
int effectiveMtu = a2dp_config->getEffectiveMtu();
if (effectiveMtu > 0 && effectiveMtu < peer_param.peer_mtu) {
codec_config->peerMtu = effectiveMtu;
} else {
codec_config->peerMtu = peer_param.peer_mtu;
}
LOG(INFO) << __func__ << ": CodecConfiguration=" << toString(*codec_config);
return true;
}
bool a2dp_get_selected_hal_pcm_config(PcmParameters* pcm_config) {
if (pcm_config == nullptr) return false;
A2dpCodecConfig* a2dp_codec_configs = bta_av_get_a2dp_current_codec();
if (a2dp_codec_configs == nullptr) {
LOG(WARNING) << __func__ << ": failure to get A2DP codec config";
*pcm_config = ::bluetooth::audio::BluetoothAudioClientInterface::
kInvalidPcmConfiguration;
return false;
}
btav_a2dp_codec_config_t current_codec = a2dp_codec_configs->getCodecConfig();
pcm_config->sampleRate = A2dpCodecToHalSampleRate(current_codec);
pcm_config->bitsPerSample = A2dpCodecToHalBitsPerSample(current_codec);
pcm_config->channelMode = A2dpCodecToHalChannelMode(current_codec);
return (pcm_config->sampleRate != SampleRate::RATE_UNKNOWN &&
pcm_config->bitsPerSample != BitsPerSample::BITS_UNKNOWN &&
pcm_config->channelMode != ChannelMode::UNKNOWN);
}
// Checking if new bluetooth_audio is supported
bool is_hal_2_0_force_disabled() {
if (!is_configured) {
btaudio_a2dp_disabled = osi_property_get_bool(BLUETOOTH_AUDIO_HAL_PROP_DISABLED, false);
is_configured = true;
}
return btaudio_a2dp_disabled;
}
} // namespace
namespace bluetooth {
namespace audio {
namespace a2dp {
bool update_codec_offloading_capabilities(
const std::vector<btav_a2dp_codec_config_t>& framework_preference) {
return ::bluetooth::audio::codec::UpdateOffloadingCapabilities(
framework_preference);
}
// Checking if new bluetooth_audio is enabled
bool is_hal_2_0_enabled() { return active_hal_interface != nullptr; }
// Check if new bluetooth_audio is running with offloading encoders
bool is_hal_2_0_offloading() {
if (!is_hal_2_0_enabled()) {
return false;
}
return active_hal_interface->GetTransportInstance()->GetSessionType() ==
SessionType::A2DP_HARDWARE_OFFLOAD_DATAPATH;
}
// Initialize BluetoothAudio HAL: openProvider
bool init(bluetooth::common::MessageLoopThread* message_loop) {
LOG(INFO) << __func__;
if (is_hal_2_0_force_disabled()) {
LOG(ERROR) << __func__ << ": BluetoothAudio HAL is disabled";
return false;
}
auto a2dp_sink =
new A2dpTransport(SessionType::A2DP_SOFTWARE_ENCODING_DATAPATH);
software_hal_interface = new bluetooth::audio::BluetoothAudioClientInterface(
a2dp_sink, message_loop);
if (!software_hal_interface->IsValid()) {
LOG(WARNING) << __func__ << ": BluetoothAudio HAL for A2DP is invalid?!";
delete software_hal_interface;
software_hal_interface = nullptr;
delete a2dp_sink;
return false;
}
if (btif_av_is_a2dp_offload_enabled()) {
a2dp_sink = new A2dpTransport(SessionType::A2DP_HARDWARE_OFFLOAD_DATAPATH);
offloading_hal_interface =
new bluetooth::audio::BluetoothAudioClientInterface(a2dp_sink,
message_loop);
if (!offloading_hal_interface->IsValid()) {
LOG(FATAL) << __func__
<< ": BluetoothAudio HAL for A2DP offloading is invalid?!";
delete offloading_hal_interface;
offloading_hal_interface = nullptr;
delete a2dp_sink;
a2dp_sink = static_cast<A2dpTransport*>(
software_hal_interface->GetTransportInstance());
delete software_hal_interface;
software_hal_interface = nullptr;
delete a2dp_sink;
return false;
}
}
active_hal_interface =
(offloading_hal_interface != nullptr ? offloading_hal_interface
: software_hal_interface);
if (remote_delay != 0) {
LOG(INFO) << __func__ << ": restore DELAY "
<< static_cast<float>(remote_delay / 10.0) << " ms";
static_cast<A2dpTransport*>(active_hal_interface->GetTransportInstance())
->SetRemoteDelay(remote_delay);
remote_delay = 0;
}
return true;
}
// Clean up BluetoothAudio HAL
void cleanup() {
if (!is_hal_2_0_enabled()) return;
end_session();
auto a2dp_sink = active_hal_interface->GetTransportInstance();
static_cast<A2dpTransport*>(a2dp_sink)->ResetPendingCmd();
static_cast<A2dpTransport*>(a2dp_sink)->ResetPresentationPosition();
active_hal_interface = nullptr;
a2dp_sink = software_hal_interface->GetTransportInstance();
delete software_hal_interface;
software_hal_interface = nullptr;
delete a2dp_sink;
if (offloading_hal_interface != nullptr) {
a2dp_sink = offloading_hal_interface->GetTransportInstance();
delete offloading_hal_interface;
offloading_hal_interface = nullptr;
delete a2dp_sink;
}
remote_delay = 0;
}
// Set up the codec into BluetoothAudio HAL
bool setup_codec() {
if (!is_hal_2_0_enabled()) {
LOG(ERROR) << __func__ << ": BluetoothAudio HAL is not enabled";
return false;
}
CodecConfiguration codec_config{};
if (!a2dp_get_selected_hal_codec_config(&codec_config)) {
LOG(ERROR) << __func__ << ": Failed to get CodecConfiguration";
return false;
}
bool should_codec_offloading =
bluetooth::audio::codec::IsCodecOffloadingEnabled(codec_config);
if (should_codec_offloading && !is_hal_2_0_offloading()) {
LOG(WARNING) << __func__ << ": Switching BluetoothAudio HAL to Hardware";
end_session();
active_hal_interface = offloading_hal_interface;
} else if (!should_codec_offloading && is_hal_2_0_offloading()) {
LOG(WARNING) << __func__ << ": Switching BluetoothAudio HAL to Software";
end_session();
active_hal_interface = software_hal_interface;
}
AudioConfiguration audio_config{};
if (active_hal_interface->GetTransportInstance()->GetSessionType() ==
SessionType::A2DP_HARDWARE_OFFLOAD_DATAPATH) {
audio_config.codecConfig(codec_config);
} else {
PcmParameters pcm_config{};
if (!a2dp_get_selected_hal_pcm_config(&pcm_config)) {
LOG(ERROR) << __func__ << ": Failed to get PcmConfiguration";
return false;
}
audio_config.pcmConfig(pcm_config);
}
return active_hal_interface->UpdateAudioConfig(audio_config);
}
void start_session() {
if (!is_hal_2_0_enabled()) {
LOG(ERROR) << __func__ << ": BluetoothAudio HAL is not enabled";
return;
}
active_hal_interface->StartSession();
}
void end_session() {
if (!is_hal_2_0_enabled()) {
LOG(ERROR) << __func__ << ": BluetoothAudio HAL is not enabled";
return;
}
active_hal_interface->EndSession();
static_cast<A2dpTransport*>(active_hal_interface->GetTransportInstance())
->ResetPresentationPosition();
}
void ack_stream_started(const tA2DP_CTRL_ACK& ack) {
auto ctrl_ack = a2dp_ack_to_bt_audio_ctrl_ack(ack);
LOG(INFO) << __func__ << ": result=" << ctrl_ack;
auto a2dp_sink =
static_cast<A2dpTransport*>(active_hal_interface->GetTransportInstance());
auto pending_cmd = a2dp_sink->GetPendingCmd();
if (pending_cmd == A2DP_CTRL_CMD_START) {
active_hal_interface->StreamStarted(ctrl_ack);
} else {
LOG(WARNING) << __func__ << ": pending=" << pending_cmd
<< " ignore result=" << ctrl_ack;
return;
}
if (ctrl_ack != bluetooth::audio::BluetoothAudioCtrlAck::PENDING) {
a2dp_sink->ResetPendingCmd();
}
}
void ack_stream_suspended(const tA2DP_CTRL_ACK& ack) {
auto ctrl_ack = a2dp_ack_to_bt_audio_ctrl_ack(ack);
LOG(INFO) << __func__ << ": result=" << ctrl_ack;
auto a2dp_sink =
static_cast<A2dpTransport*>(active_hal_interface->GetTransportInstance());
auto pending_cmd = a2dp_sink->GetPendingCmd();
if (pending_cmd == A2DP_CTRL_CMD_SUSPEND) {
active_hal_interface->StreamSuspended(ctrl_ack);
} else if (pending_cmd == A2DP_CTRL_CMD_STOP) {
LOG(INFO) << __func__ << ": A2DP_CTRL_CMD_STOP result=" << ctrl_ack;
} else {
LOG(WARNING) << __func__ << ": pending=" << pending_cmd
<< " ignore result=" << ctrl_ack;
return;
}
if (ctrl_ack != bluetooth::audio::BluetoothAudioCtrlAck::PENDING) {
a2dp_sink->ResetPendingCmd();
}
}
// Read from the FMQ of BluetoothAudio HAL
size_t read(uint8_t* p_buf, uint32_t len) {
if (!is_hal_2_0_enabled()) {
LOG(ERROR) << __func__ << ": BluetoothAudio HAL is not enabled";
return 0;
} else if (is_hal_2_0_offloading()) {
LOG(ERROR) << __func__ << ": session_type="
<< toString(active_hal_interface->GetTransportInstance()
->GetSessionType())
<< " is not A2DP_SOFTWARE_ENCODING_DATAPATH";
return 0;
}
return active_hal_interface->ReadAudioData(p_buf, len);
}
// Update A2DP delay report to BluetoothAudio HAL
void set_remote_delay(uint16_t delay_report) {
if (!is_hal_2_0_enabled()) {
LOG(INFO) << __func__ << ": not ready for DelayReport "
<< static_cast<float>(delay_report / 10.0) << " ms";
remote_delay = delay_report;
return;
}
VLOG(1) << __func__ << ": DELAY " << static_cast<float>(delay_report / 10.0)
<< " ms";
static_cast<A2dpTransport*>(active_hal_interface->GetTransportInstance())
->SetRemoteDelay(delay_report);
}
} // namespace a2dp
} // namespace audio
} // namespace bluetooth