blob: c4c60618f7394fb0e09e935693486333d2cdf2e7 [file] [log] [blame]
/******************************************************************************
*
* Copyright 2005-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
#include <string.h>
#include "bt_target.h"
#if (BTA_HH_INCLUDED == TRUE)
#include "bta_hh_int.h"
#include "osi/include/osi.h"
/* if SSR max latency is not defined by remote device, set the default value
as half of the link supervision timeout */
#define BTA_HH_GET_DEF_SSR_MAX_LAT(x) ((x) >> 1)
/*****************************************************************************
* Constants
****************************************************************************/
#define BTA_HH_KB_CTRL_MASK 0x11
#define BTA_HH_KB_SHIFT_MASK 0x22
#define BTA_HH_KB_ALT_MASK 0x44
#define BTA_HH_KB_GUI_MASK 0x88
#define BTA_HH_KB_CAPS_LOCK 0x39 /* caps lock */
#define BTA_HH_KB_NUM_LOCK 0x53 /* num lock */
#define BTA_HH_MAX_RPT_CHARS 8
static const uint8_t bta_hh_mod_key_mask[BTA_HH_MOD_MAX_KEY] = {
BTA_HH_KB_CTRL_MASK, BTA_HH_KB_SHIFT_MASK, BTA_HH_KB_ALT_MASK,
BTA_HH_KB_GUI_MASK};
/*******************************************************************************
*
* Function bta_hh_find_cb
*
* Description Find best available control block according to BD address.
*
*
* Returns void
*
******************************************************************************/
uint8_t bta_hh_find_cb(const RawAddress& bda) {
uint8_t xx;
/* See how many active devices there are. */
for (xx = 0; xx < BTA_HH_MAX_DEVICE; xx++) {
/* check if any active/known devices is a match */
if ((bda == bta_hh_cb.kdev[xx].addr && !bda.IsEmpty())) {
#if (BTA_HH_DEBUG == TRUE)
APPL_TRACE_DEBUG("found kdev_cb[%d] hid_handle = %d ", xx,
bta_hh_cb.kdev[xx].hid_handle)
#endif
return xx;
}
#if (BTA_HH_DEBUG == TRUE)
else
APPL_TRACE_DEBUG("in_use ? [%d] kdev[%d].hid_handle = %d state = [%d]",
bta_hh_cb.kdev[xx].in_use, xx,
bta_hh_cb.kdev[xx].hid_handle, bta_hh_cb.kdev[xx].state);
#endif
}
/* if no active device match, find a spot for it */
for (xx = 0; xx < BTA_HH_MAX_DEVICE; xx++) {
if (!bta_hh_cb.kdev[xx].in_use) {
bta_hh_cb.kdev[xx].addr = bda;
break;
}
}
/* If device list full, report BTA_HH_IDX_INVALID */
#if (BTA_HH_DEBUG == TRUE)
APPL_TRACE_DEBUG("bta_hh_find_cb:: index = %d while max = %d", xx,
BTA_HH_MAX_DEVICE);
#endif
if (xx == BTA_HH_MAX_DEVICE) xx = BTA_HH_IDX_INVALID;
return xx;
}
/*******************************************************************************
*
* Function bta_hh_clean_up_kdev
*
* Description Clean up device control block when device is removed from
* manitainace list, and update control block index map.
*
* Returns void
*
******************************************************************************/
void bta_hh_clean_up_kdev(tBTA_HH_DEV_CB* p_cb) {
uint8_t index;
if (p_cb->hid_handle != BTA_HH_INVALID_HANDLE) {
#if (BTA_HH_LE_INCLUDED == TRUE)
if (p_cb->is_le_device)
bta_hh_cb.le_cb_index[BTA_HH_GET_LE_CB_IDX(p_cb->hid_handle)] =
BTA_HH_IDX_INVALID;
else
#endif
bta_hh_cb.cb_index[p_cb->hid_handle] = BTA_HH_IDX_INVALID;
}
/* reset device control block */
index = p_cb->index; /* Preserve index for this control block */
/* Free buffer for report descriptor info */
osi_free_and_reset((void**)&p_cb->dscp_info.descriptor.dsc_list);
memset(p_cb, 0, sizeof(tBTA_HH_DEV_CB)); /* Reset control block */
p_cb->index = index; /* Restore index for this control block */
p_cb->state = BTA_HH_IDLE_ST;
p_cb->hid_handle = BTA_HH_INVALID_HANDLE;
}
/*******************************************************************************
*
* Function bta_hh_update_di_info
*
* Description Maintain a known device list for BTA HH.
*
* Returns void
*
******************************************************************************/
void bta_hh_update_di_info(tBTA_HH_DEV_CB* p_cb, uint16_t vendor_id,
uint16_t product_id, uint16_t version,
#if (BTA_HH_LE_INCLUDED == TRUE)
uint8_t flag)
#else
UNUSED_ATTR uint8_t flag)
#endif
{
#if (BTA_HH_DEBUG == TRUE)
APPL_TRACE_DEBUG("vendor_id = 0x%2x product_id = 0x%2x version = 0x%2x",
vendor_id, product_id, version);
#endif
p_cb->dscp_info.vendor_id = vendor_id;
p_cb->dscp_info.product_id = product_id;
p_cb->dscp_info.version = version;
#if (BTA_HH_LE_INCLUDED == TRUE)
p_cb->dscp_info.flag = flag;
#endif
}
/*******************************************************************************
*
* Function bta_hh_add_device_to_list
*
* Description Maintain a known device list for BTA HH.
*
* Returns void
*
******************************************************************************/
void bta_hh_add_device_to_list(tBTA_HH_DEV_CB* p_cb, uint8_t handle,
uint16_t attr_mask,
tHID_DEV_DSCP_INFO* p_dscp_info,
uint8_t sub_class, uint16_t ssr_max_latency,
uint16_t ssr_min_tout, uint8_t app_id) {
#if (BTA_HH_DEBUG == TRUE)
APPL_TRACE_DEBUG("subclass = 0x%2x", sub_class);
#endif
p_cb->hid_handle = handle;
p_cb->in_use = true;
p_cb->attr_mask = attr_mask;
p_cb->sub_class = sub_class;
p_cb->app_id = app_id;
p_cb->dscp_info.ssr_max_latency = ssr_max_latency;
p_cb->dscp_info.ssr_min_tout = ssr_min_tout;
/* store report descriptor info */
if (p_dscp_info) {
osi_free_and_reset((void**)&p_cb->dscp_info.descriptor.dsc_list);
if (p_dscp_info->dl_len) {
p_cb->dscp_info.descriptor.dsc_list =
(uint8_t*)osi_malloc(p_dscp_info->dl_len);
p_cb->dscp_info.descriptor.dl_len = p_dscp_info->dl_len;
memcpy(p_cb->dscp_info.descriptor.dsc_list, p_dscp_info->dsc_list,
p_dscp_info->dl_len);
}
}
}
/*******************************************************************************
*
* Function bta_hh_tod_spt
*
* Description Check to see if this type of device is supported
*
* Returns
*
******************************************************************************/
bool bta_hh_tod_spt(tBTA_HH_DEV_CB* p_cb, uint8_t sub_class) {
uint8_t xx;
uint8_t cod = (sub_class >> 2); /* lower two bits are reserved */
for (xx = 0; xx < p_bta_hh_cfg->max_devt_spt; xx++) {
if (cod == (uint8_t)p_bta_hh_cfg->p_devt_list[xx].tod) {
p_cb->app_id = p_bta_hh_cfg->p_devt_list[xx].app_id;
#if (BTA_HH_DEBUG == TRUE)
APPL_TRACE_EVENT("bta_hh_tod_spt sub_class:0x%x supported", sub_class);
#endif
return true;
}
}
#if (BTA_HH_DEBUG == TRUE)
APPL_TRACE_EVENT("bta_hh_tod_spt sub_class:0x%x NOT supported", sub_class);
#endif
return false;
}
/*******************************************************************************
*
* Function bta_hh_parse_keybd_rpt
*
* Description This utility function parse a boot mode keyboard report.
*
* Returns void
*
******************************************************************************/
void bta_hh_parse_keybd_rpt(tBTA_HH_BOOT_RPT* p_kb_data, uint8_t* p_report,
uint16_t report_len) {
tBTA_HH_KB_CB* p_kb = &bta_hh_cb.kb_cb;
tBTA_HH_KEYBD_RPT* p_data = &p_kb_data->data_rpt.keybd_rpt;
uint8_t this_char, ctl_shift;
uint16_t xx, yy, key_idx = 0;
uint8_t this_report[BTA_HH_MAX_RPT_CHARS];
#if (BTA_HH_DEBUG == TRUE)
APPL_TRACE_DEBUG("bta_hh_parse_keybd_rpt: (report=%p, report_len=%d) called",
p_report, report_len);
#endif
if (report_len < 2) return;
ctl_shift = *p_report++;
report_len--;
if (report_len > BTA_HH_MAX_RPT_CHARS) report_len = BTA_HH_MAX_RPT_CHARS;
memset(this_report, 0, BTA_HH_MAX_RPT_CHARS);
memset(p_data, 0, sizeof(tBTA_HH_KEYBD_RPT));
memcpy(this_report, p_report, report_len);
/* Take care of shift, control, GUI and alt, modifier keys */
for (xx = 0; xx < BTA_HH_MOD_MAX_KEY; xx++) {
if (ctl_shift & bta_hh_mod_key_mask[xx]) {
APPL_TRACE_DEBUG("Mod Key[%02x] pressed", bta_hh_mod_key_mask[xx]);
p_kb->mod_key[xx] = true;
} else if (p_kb->mod_key[xx]) {
p_kb->mod_key[xx] = false;
}
/* control key flag is set */
p_data->mod_key[xx] = p_kb->mod_key[xx];
}
/***************************************************************************/
/* First step is to remove all characters we saw in the last report */
/***************************************************************************/
for (xx = 0; xx < report_len; xx++) {
for (yy = 0; yy < BTA_HH_MAX_RPT_CHARS; yy++) {
if (this_report[xx] == p_kb->last_report[yy]) {
this_report[xx] = 0;
}
}
}
/***************************************************************************/
/* Now, process all the characters in the report, up to 6 keycodes */
/***************************************************************************/
for (xx = 0; xx < report_len; xx++) {
#if (BTA_HH_DEBUG == TRUE)
APPL_TRACE_DEBUG("this_char = %02x", this_report[xx]);
#endif
this_char = this_report[xx];
if (this_char == 0) continue;
/* take the key code as the report data */
if (this_report[xx] == BTA_HH_KB_CAPS_LOCK)
p_kb->caps_lock = p_kb->caps_lock ? false : true;
else if (this_report[xx] == BTA_HH_KB_NUM_LOCK)
p_kb->num_lock = p_kb->num_lock ? false : true;
else
p_data->this_char[key_idx++] = this_char;
#if (BTA_HH_DEBUG == TRUE)
APPL_TRACE_DEBUG("found keycode %02x ", this_report[xx]);
#endif
p_data->caps_lock = p_kb->caps_lock;
p_data->num_lock = p_kb->num_lock;
}
memset(p_kb->last_report, 0, BTA_HH_MAX_RPT_CHARS);
memcpy(p_kb->last_report, p_report, report_len);
return;
}
/*******************************************************************************
*
* Function bta_hh_parse_mice_rpt
*
* Description This utility function parse a boot mode mouse report.
*
* Returns void
*
******************************************************************************/
void bta_hh_parse_mice_rpt(tBTA_HH_BOOT_RPT* p_mice_data, uint8_t* p_report,
uint16_t report_len) {
tBTA_HH_MICE_RPT* p_data = &p_mice_data->data_rpt.mice_rpt;
#if (BTA_HH_DEBUG == TRUE)
uint8_t xx;
APPL_TRACE_DEBUG(
"bta_hh_parse_mice_rpt: bta_keybd_rpt_rcvd(report=%p, \
report_len=%d) called",
p_report, report_len);
#endif
if (report_len < 3) return;
if (report_len > BTA_HH_MAX_RPT_CHARS) report_len = BTA_HH_MAX_RPT_CHARS;
#if (BTA_HH_DEBUG == TRUE)
for (xx = 0; xx < report_len; xx++) {
APPL_TRACE_DEBUG("this_char = %02x", p_report[xx]);
}
#endif
/* only first bytes lower 3 bits valid */
p_data->mouse_button = (p_report[0] & 0x07);
/* x displacement */
p_data->delta_x = p_report[1];
/* y displacement */
p_data->delta_y = p_report[2];
#if (BTA_HH_DEBUG == TRUE)
APPL_TRACE_DEBUG("mice button: 0x%2x", p_data->mouse_button);
APPL_TRACE_DEBUG("mice move: x = %d y = %d", p_data->delta_x,
p_data->delta_y);
#endif
return;
}
/*******************************************************************************
*
* Function bta_hh_read_ssr_param
*
* Description Read the SSR Parameter for the remote device
*
* Returns tBTA_HH_STATUS operation status
*
******************************************************************************/
tBTA_HH_STATUS bta_hh_read_ssr_param(const RawAddress& bd_addr,
uint16_t* p_max_ssr_lat,
uint16_t* p_min_ssr_tout) {
tBTA_HH_STATUS status = BTA_HH_ERR;
tBTA_HH_CB* p_cb = &bta_hh_cb;
uint8_t i;
uint16_t ssr_max_latency;
for (i = 0; i < BTA_HH_MAX_KNOWN; i++) {
if (p_cb->kdev[i].addr == bd_addr) {
/* if remote device does not have HIDSSRHostMaxLatency attribute in SDP,
set SSR max latency default value here. */
if (p_cb->kdev[i].dscp_info.ssr_max_latency == HID_SSR_PARAM_INVALID) {
/* The default is calculated as half of link supervision timeout.*/
BTM_GetLinkSuperTout(p_cb->kdev[i].addr, &ssr_max_latency);
ssr_max_latency = BTA_HH_GET_DEF_SSR_MAX_LAT(ssr_max_latency);
/* per 1.1 spec, if the newly calculated max latency is greater than
BTA_HH_SSR_MAX_LATENCY_DEF which is 500ms, use
BTA_HH_SSR_MAX_LATENCY_DEF */
if (ssr_max_latency > BTA_HH_SSR_MAX_LATENCY_DEF)
ssr_max_latency = BTA_HH_SSR_MAX_LATENCY_DEF;
*p_max_ssr_lat = ssr_max_latency;
} else
*p_max_ssr_lat = p_cb->kdev[i].dscp_info.ssr_max_latency;
if (p_cb->kdev[i].dscp_info.ssr_min_tout == HID_SSR_PARAM_INVALID)
*p_min_ssr_tout = BTA_HH_SSR_MIN_TOUT_DEF;
else
*p_min_ssr_tout = p_cb->kdev[i].dscp_info.ssr_min_tout;
status = BTA_HH_OK;
break;
}
}
return status;
}
/*******************************************************************************
*
* Function bta_hh_cleanup_disable
*
* Description when disable finished, cleanup control block and send
* callback
*
*
* Returns void
*
******************************************************************************/
void bta_hh_cleanup_disable(tBTA_HH_STATUS status) {
uint8_t xx;
/* free buffer in CB holding report descriptors */
for (xx = 0; xx < BTA_HH_MAX_DEVICE; xx++) {
osi_free_and_reset(
(void**)&bta_hh_cb.kdev[xx].dscp_info.descriptor.dsc_list);
}
if (bta_hh_cb.p_disc_db) {
/* Cancel SDP if it had been started. */
(void)SDP_CancelServiceSearch (bta_hh_cb.p_disc_db);
osi_free_and_reset((void**)&bta_hh_cb.p_disc_db);
}
if (bta_hh_cb.p_cback) {
tBTA_HH bta_hh;
bta_hh.status = status;
(*bta_hh_cb.p_cback)(BTA_HH_DISABLE_EVT, &bta_hh);
/* all connections are down, no waiting for diconnect */
memset(&bta_hh_cb, 0, sizeof(tBTA_HH_CB));
}
}
/*******************************************************************************
*
* Function bta_hh_dev_handle_to_cb_idx
*
* Description convert a HID device handle to the device control block
* index.
*
*
* Returns uint8_t: index of the device control block.
*
******************************************************************************/
uint8_t bta_hh_dev_handle_to_cb_idx(uint8_t dev_handle) {
uint8_t index = BTA_HH_IDX_INVALID;
#if (BTA_HH_LE_INCLUDED == TRUE)
if (BTA_HH_IS_LE_DEV_HDL(dev_handle)) {
if (BTA_HH_IS_LE_DEV_HDL_VALID(dev_handle))
index = bta_hh_cb.le_cb_index[BTA_HH_GET_LE_CB_IDX(dev_handle)];
#if (BTA_HH_DEBUG == TRUE)
APPL_TRACE_DEBUG("bta_hh_dev_handle_to_cb_idx dev_handle = %d index = %d",
dev_handle, index);
#endif
} else
#endif
/* regular HID device checking */
if (dev_handle < BTA_HH_MAX_KNOWN)
index = bta_hh_cb.cb_index[dev_handle];
return index;
}
#if (BTA_HH_DEBUG == TRUE)
/*******************************************************************************
*
* Function bta_hh_trace_dev_db
*
* Description Check to see if this type of device is supported
*
* Returns
*
******************************************************************************/
void bta_hh_trace_dev_db(void) {
uint8_t xx;
APPL_TRACE_DEBUG("bta_hh_trace_dev_db:: Device DB list********************");
for (xx = 0; xx < BTA_HH_MAX_DEVICE; xx++) {
APPL_TRACE_DEBUG("kdev[%d] in_use[%d] handle[%d] ", xx,
bta_hh_cb.kdev[xx].in_use, bta_hh_cb.kdev[xx].hid_handle);
APPL_TRACE_DEBUG(
"\t\t\t attr_mask[%04x] state [%d] sub_class[%02x] index = %d",
bta_hh_cb.kdev[xx].attr_mask, bta_hh_cb.kdev[xx].state,
bta_hh_cb.kdev[xx].sub_class, bta_hh_cb.kdev[xx].index);
}
APPL_TRACE_DEBUG("*********************************************************");
}
#endif
#endif /* HL_INCLUDED */