| /****************************************************************************** |
| * |
| * Copyright (C) 2014 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| #include <string.h> |
| #include <stdio.h> |
| #include <stddef.h> |
| #include "bt_target.h" |
| |
| #include "btm_ble_api.h" |
| #include "bt_types.h" |
| #include "bt_utils.h" |
| #include "btu.h" |
| #include "btm_int.h" |
| #include "device/include/controller.h" |
| #include "hcimsgs.h" |
| |
| #if (BLE_INCLUDED == TRUE) |
| |
| tBTM_BLE_BATCH_SCAN_CB ble_batchscan_cb; |
| tBTM_BLE_ADV_TRACK_CB ble_advtrack_cb; |
| |
| |
| /* length of each batch scan command */ |
| #define BTM_BLE_BATCH_SCAN_STORAGE_CFG_LEN 4 |
| #define BTM_BLE_BATCH_SCAN_PARAM_CONFIG_LEN 12 |
| #define BTM_BLE_BATCH_SCAN_ENB_DISB_LEN 2 |
| #define BTM_BLE_BATCH_SCAN_READ_RESULTS_LEN 2 |
| |
| #define BTM_BLE_BATCH_SCAN_CB_EVT_MASK 0xF0 |
| #define BTM_BLE_BATCH_SCAN_SUBCODE_MASK 0x0F |
| |
| /******************************************************************************* |
| ** Local functions |
| *******************************************************************************/ |
| void btm_ble_batchscan_vsc_cmpl_cback (tBTM_VSC_CMPL *p_params); |
| void btm_ble_batchscan_cleanup(void); |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_batchscan_filter_track_adv_vse_cback |
| ** |
| ** Description VSE callback for batch scan, filter, and tracking events. |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void btm_ble_batchscan_filter_track_adv_vse_cback(UINT8 len, UINT8 *p) |
| { |
| tBTM_BLE_TRACK_ADV_DATA adv_data; |
| |
| UINT8 sub_event = 0; |
| tBTM_BLE_VSC_CB cmn_ble_vsc_cb; |
| STREAM_TO_UINT8(sub_event, p); |
| |
| BTM_TRACE_EVENT("btm_ble_batchscan_filter_track_adv_vse_cback called with event:%x", sub_event); |
| if (HCI_VSE_SUBCODE_BLE_THRESHOLD_SUB_EVT == sub_event && |
| NULL != ble_batchscan_cb.p_thres_cback) |
| { |
| ble_batchscan_cb.p_thres_cback(ble_batchscan_cb.ref_value); |
| return; |
| } |
| |
| if (HCI_VSE_SUBCODE_BLE_TRACKING_SUB_EVT == sub_event && NULL != ble_advtrack_cb.p_track_cback) |
| { |
| if (len < 10) |
| return; |
| |
| memset(&adv_data, 0 , sizeof(tBTM_BLE_TRACK_ADV_DATA)); |
| BTM_BleGetVendorCapabilities(&cmn_ble_vsc_cb); |
| adv_data.client_if = (UINT8)ble_advtrack_cb.ref_value; |
| if (cmn_ble_vsc_cb.version_supported > BTM_VSC_CHIP_CAPABILITY_L_VERSION) |
| { |
| STREAM_TO_UINT8(adv_data.filt_index, p); |
| STREAM_TO_UINT8(adv_data.advertiser_state, p); |
| STREAM_TO_UINT8(adv_data.advertiser_info_present, p); |
| STREAM_TO_BDADDR(adv_data.bd_addr.address, p); |
| STREAM_TO_UINT8(adv_data.addr_type, p); |
| |
| /* Extract the adv info details */ |
| if (ADV_INFO_PRESENT == adv_data.advertiser_info_present) |
| { |
| STREAM_TO_UINT8(adv_data.tx_power, p); |
| STREAM_TO_UINT8(adv_data.rssi_value, p); |
| STREAM_TO_UINT16(adv_data.time_stamp, p); |
| |
| STREAM_TO_UINT8(adv_data.adv_pkt_len, p); |
| if (adv_data.adv_pkt_len > 0) |
| { |
| adv_data.p_adv_pkt_data = GKI_getbuf(adv_data.adv_pkt_len); |
| memcpy(adv_data.p_adv_pkt_data, p, adv_data.adv_pkt_len); |
| } |
| |
| STREAM_TO_UINT8(adv_data.scan_rsp_len, p); |
| if (adv_data.scan_rsp_len > 0) |
| { |
| adv_data.p_scan_rsp_data = GKI_getbuf(adv_data.scan_rsp_len); |
| memcpy(adv_data.p_scan_rsp_data, p, adv_data.scan_rsp_len); |
| } |
| } |
| } |
| else |
| { |
| /* Based on L-release version */ |
| STREAM_TO_UINT8(adv_data.filt_index, p); |
| STREAM_TO_UINT8(adv_data.addr_type, p); |
| STREAM_TO_BDADDR(adv_data.bd_addr.address, p); |
| STREAM_TO_UINT8(adv_data.advertiser_state, p); |
| } |
| |
| BTM_TRACE_EVENT("track_adv_vse_cback called: %d, %d, %d", adv_data.filt_index, |
| adv_data.addr_type, adv_data.advertiser_state); |
| ble_advtrack_cb.p_track_cback(&adv_data); |
| return; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_batchscan_enq_op_q |
| ** |
| ** Description enqueue a batchscan operation in q to check command complete |
| ** status |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_batchscan_enq_op_q(UINT8 opcode, tBTM_BLE_BATCH_SCAN_STATE cur_state, |
| UINT8 cb_evt, tBTM_BLE_REF_VALUE ref_value) |
| { |
| ble_batchscan_cb.op_q.sub_code[ble_batchscan_cb.op_q.next_idx] = (opcode |(cb_evt << 4)); |
| ble_batchscan_cb.op_q.cur_state[ble_batchscan_cb.op_q.next_idx] = cur_state; |
| ble_batchscan_cb.op_q.ref_value[ble_batchscan_cb.op_q.next_idx] = ref_value; |
| BTM_TRACE_DEBUG("btm_ble_batchscan_enq_op_q: subcode:%d, Cur_state:%d, ref_value:%d", |
| ble_batchscan_cb.op_q.sub_code[ble_batchscan_cb.op_q.next_idx], |
| ble_batchscan_cb.op_q.cur_state[ble_batchscan_cb.op_q.next_idx], |
| ble_batchscan_cb.op_q.ref_value[ble_batchscan_cb.op_q.next_idx]); |
| ble_batchscan_cb.op_q.next_idx = (ble_batchscan_cb.op_q.next_idx + 1) |
| % BTM_BLE_BATCH_SCAN_MAX; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_batchscan_enq_rep_q |
| ** |
| ** Description enqueue a batchscan report operation in q to check command complete |
| ** status |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS btm_ble_batchscan_enq_rep_q(UINT8 report_format, tBTM_BLE_REF_VALUE ref_value) |
| { |
| int i = 0; |
| for (i = 0; i < BTM_BLE_BATCH_REP_MAIN_Q_SIZE; i++) |
| { |
| if (report_format == ble_batchscan_cb.main_rep_q.rep_mode[i]) |
| return BTM_ILLEGAL_VALUE; |
| } |
| |
| ble_batchscan_cb.main_rep_q.rep_mode[ble_batchscan_cb.main_rep_q.next_idx] = report_format; |
| ble_batchscan_cb.main_rep_q.ref_value[ble_batchscan_cb.main_rep_q.next_idx] = ref_value; |
| ble_batchscan_cb.main_rep_q.num_records[ble_batchscan_cb.main_rep_q.next_idx] = 0; |
| ble_batchscan_cb.main_rep_q.data_len[ble_batchscan_cb.main_rep_q.next_idx] = 0; |
| ble_batchscan_cb.main_rep_q.p_data[ble_batchscan_cb.main_rep_q.next_idx] = NULL; |
| BTM_TRACE_DEBUG("btm_ble_batchscan_enq_rep_q: index:%d, rep %d, ref %d", |
| ble_batchscan_cb.main_rep_q.next_idx, report_format, ref_value); |
| |
| ble_batchscan_cb.main_rep_q.next_idx = (ble_batchscan_cb.main_rep_q.next_idx + 1) |
| % BTM_BLE_BATCH_REP_MAIN_Q_SIZE; |
| return BTM_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_batchscan_enq_rep_data |
| ** |
| ** Description setup the data in the main report queue |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_batchscan_enq_rep_data(UINT8 report_format, UINT8 num_records, UINT8 *p_data, |
| UINT8 data_len) |
| { |
| int index = 0, len = 0; |
| UINT8 *p_orig_data = NULL, *p_app_data = NULL; |
| |
| for (index = 0; index < BTM_BLE_BATCH_REP_MAIN_Q_SIZE; index++) |
| { |
| if (report_format == ble_batchscan_cb.main_rep_q.rep_mode[index]) |
| break; |
| } |
| |
| BTM_TRACE_DEBUG("btm_ble_batchscan_enq_rep_data: index:%d, rep %d, num %d len : %d", |
| index, report_format, num_records, data_len); |
| |
| if (index < BTM_BLE_BATCH_REP_MAIN_Q_SIZE && data_len > 0 && num_records > 0) |
| { |
| len = ble_batchscan_cb.main_rep_q.data_len[index]; |
| p_orig_data = ble_batchscan_cb.main_rep_q.p_data[index]; |
| if (NULL != p_orig_data) |
| { |
| p_app_data = GKI_getbuf(len + data_len); |
| memcpy(p_app_data, p_orig_data, len); |
| memcpy(p_app_data+len, p_data, data_len); |
| GKI_freebuf(p_orig_data); |
| ble_batchscan_cb.main_rep_q.p_data[index] = p_app_data; |
| ble_batchscan_cb.main_rep_q.num_records[index] += num_records; |
| ble_batchscan_cb.main_rep_q.data_len[index] += data_len; |
| } |
| else |
| { |
| p_app_data = GKI_getbuf(data_len); |
| memcpy(p_app_data, p_data, data_len); |
| ble_batchscan_cb.main_rep_q.p_data[index] = p_app_data; |
| ble_batchscan_cb.main_rep_q.num_records[index] = num_records; |
| ble_batchscan_cb.main_rep_q.data_len[index] = data_len; |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_batchscan_deq_rep_q |
| ** |
| ** Description dequeue a batchscan report in q when command complete |
| ** is received |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_batchscan_deq_rep_data(UINT8 report_format, tBTM_BLE_REF_VALUE *p_ref_value, |
| UINT8 *p_num_records, UINT8 **p_data, UINT16 *p_data_len) |
| { |
| int index = 0; |
| |
| for (index = 0; index < BTM_BLE_BATCH_REP_MAIN_Q_SIZE; index++) |
| { |
| if (report_format == ble_batchscan_cb.main_rep_q.rep_mode[index]) |
| break; |
| } |
| |
| if (BTM_BLE_BATCH_REP_MAIN_Q_SIZE == index) |
| { |
| BTM_TRACE_ERROR("btm_ble_batchscan_deq_rep_data: rep_format:%d not found", report_format); |
| return; |
| } |
| |
| *p_num_records = ble_batchscan_cb.main_rep_q.num_records[index]; |
| *p_ref_value = ble_batchscan_cb.main_rep_q.ref_value[index]; |
| *p_data = ble_batchscan_cb.main_rep_q.p_data[index]; |
| *p_data_len = ble_batchscan_cb.main_rep_q.data_len[index]; |
| |
| ble_batchscan_cb.main_rep_q.p_data[index] = NULL; |
| ble_batchscan_cb.main_rep_q.data_len[index] = 0; |
| ble_batchscan_cb.main_rep_q.rep_mode[index] = 0; |
| ble_batchscan_cb.main_rep_q.ref_value[index] = 0; |
| ble_batchscan_cb.main_rep_q.num_records[index] = 0; |
| |
| BTM_TRACE_DEBUG("btm_ble_batchscan_deq_rep_data: index:%d, rep %d, num %d, data_len %d", |
| index, report_format, *p_num_records, *p_data_len); |
| |
| ble_batchscan_cb.main_rep_q.pending_idx = (ble_batchscan_cb.main_rep_q.pending_idx + 1) |
| % BTM_BLE_BATCH_SCAN_MAX; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_batchscan_deq_op_q |
| ** |
| ** Description dequeue a batch scan operation from q when command complete |
| ** is received |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_batchscan_deq_op_q(UINT8 *p_opcode,tBTM_BLE_BATCH_SCAN_STATE *cur_state, |
| UINT8 *p_cb_evt, tBTM_BLE_REF_VALUE *p_ref) |
| { |
| *p_cb_evt = (ble_batchscan_cb.op_q.sub_code[ble_batchscan_cb.op_q.pending_idx] >> 4); |
| *p_opcode = (ble_batchscan_cb.op_q.sub_code[ble_batchscan_cb.op_q.pending_idx] |
| & BTM_BLE_BATCH_SCAN_SUBCODE_MASK); |
| *p_ref = ble_batchscan_cb.op_q.ref_value[ble_batchscan_cb.op_q.pending_idx]; |
| *cur_state = (ble_batchscan_cb.op_q.cur_state[ble_batchscan_cb.op_q.pending_idx]); |
| ble_batchscan_cb.op_q.pending_idx = (ble_batchscan_cb.op_q.pending_idx + 1) |
| % BTM_BLE_BATCH_SCAN_MAX; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_read_batchscan_reports |
| ** |
| ** Description This function reads the reports from controller |
| ** |
| ** Parameters scan_mode - The mode for which the reports are to be read out from the controller |
| ** ref_value - Reference value |
| ** |
| ** Returns status |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS btm_ble_read_batchscan_reports(tBTM_BLE_BATCH_SCAN_MODE scan_mode, |
| tBTM_BLE_REF_VALUE ref_value) |
| { |
| tBTM_STATUS status = BTM_NO_RESOURCES; |
| UINT8 param[BTM_BLE_BATCH_SCAN_READ_RESULTS_LEN], *pp; |
| pp = param; |
| |
| memset(param, 0, BTM_BLE_BATCH_SCAN_READ_RESULTS_LEN); |
| |
| UINT8_TO_STREAM (pp, BTM_BLE_BATCH_SCAN_READ_RESULTS); |
| UINT8_TO_STREAM (pp, scan_mode); |
| |
| if ((status = BTM_VendorSpecificCommand (HCI_BLE_BATCH_SCAN_OCF, |
| BTM_BLE_BATCH_SCAN_READ_RESULTS_LEN, param, btm_ble_batchscan_vsc_cmpl_cback)) |
| != BTM_CMD_STARTED) |
| { |
| BTM_TRACE_ERROR("btm_ble_read_batchscan_reports %d", status); |
| return BTM_ILLEGAL_VALUE; |
| } |
| |
| if (BTM_CMD_STARTED == status) |
| { |
| /* The user needs to be provided scan read reports event */ |
| btm_ble_batchscan_enq_op_q(BTM_BLE_BATCH_SCAN_READ_RESULTS, ble_batchscan_cb.cur_state, |
| BTM_BLE_BATCH_SCAN_READ_REPTS_EVT, ref_value); |
| } |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_batchscan_vsc_cmpl_cback |
| ** |
| ** Description Batch scan VSC complete callback |
| ** |
| ** Parameters p_params - VSC completed callback parameters |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_batchscan_vsc_cmpl_cback (tBTM_VSC_CMPL *p_params) |
| { |
| UINT8 *p = p_params->p_param_buf; |
| UINT16 len = p_params->param_len; |
| tBTM_BLE_REF_VALUE ref_value = 0; |
| |
| UINT8 status = 0, subcode = 0, opcode = 0; |
| UINT8 report_format = 0, num_records = 0, cb_evt = 0; |
| UINT16 data_len = 0; |
| tBTM_BLE_BATCH_SCAN_STATE cur_state = 0; |
| tBTM_STATUS btm_status = 0; |
| UINT8 *p_data = NULL; |
| |
| if (len < 2) |
| { |
| BTM_TRACE_ERROR("wrong length for btm_ble_batch_scan_vsc_cmpl_cback"); |
| btm_ble_batchscan_deq_op_q(&opcode, &cur_state, &cb_evt, &ref_value); |
| return; |
| } |
| |
| STREAM_TO_UINT8(status, p); |
| STREAM_TO_UINT8(subcode, p); |
| |
| btm_ble_batchscan_deq_op_q(&opcode, &cur_state, &cb_evt, &ref_value); |
| |
| BTM_TRACE_DEBUG("btm_ble_batchscan op_code = %02x state = %02x cb_evt = %02x,ref_value=%d", |
| opcode, cur_state, cb_evt, ref_value); |
| |
| if (opcode != subcode) |
| { |
| BTM_TRACE_ERROR("Got unexpected VSC cmpl, expected: %d got: %d",subcode,opcode); |
| return; |
| } |
| |
| switch (subcode) |
| { |
| case BTM_BLE_BATCH_SCAN_ENB_DISAB_CUST_FEATURE: |
| { |
| if (BTM_SUCCESS == status && BTM_BLE_SCAN_ENABLE_CALLED == cur_state) |
| ble_batchscan_cb.cur_state = BTM_BLE_SCAN_ENABLED_STATE; |
| else |
| if (BTM_BLE_SCAN_ENABLE_CALLED == cur_state) |
| { |
| BTM_TRACE_ERROR("SCAN_ENB_DISAB_CUST_FEATURE - Invalid state after enb"); |
| ble_batchscan_cb.cur_state = BTM_BLE_SCAN_INVALID_STATE; |
| } |
| |
| BTM_TRACE_DEBUG("BTM_BLE_BATCH_SCAN_ENB_DISAB_CUST_FEAT status = %d, state: %d,evt=%d", |
| status, ble_batchscan_cb.cur_state, cb_evt); |
| |
| if (cb_evt != 0 && NULL != ble_batchscan_cb.p_setup_cback) |
| ble_batchscan_cb.p_setup_cback(cb_evt, ref_value, status); |
| break; |
| } |
| |
| case BTM_BLE_BATCH_SCAN_SET_STORAGE_PARAM: |
| { |
| BTM_TRACE_DEBUG("BTM_BLE_BATCH_SCAN_SET_STORAGE_PARAM status = %d, evt=%d", |
| status, cb_evt); |
| if (cb_evt != 0 && NULL != ble_batchscan_cb.p_setup_cback) |
| ble_batchscan_cb.p_setup_cback(cb_evt, ref_value, status); |
| break; |
| } |
| |
| case BTM_BLE_BATCH_SCAN_SET_PARAMS: |
| { |
| BTM_TRACE_DEBUG("BTM_BLE_BATCH_SCAN_SET_PARAMS status = %d,evt=%d", status, cb_evt); |
| |
| if (BTM_BLE_SCAN_DISABLE_CALLED == cur_state) |
| { |
| if (BTM_SUCCESS == status) |
| { |
| ble_batchscan_cb.cur_state = BTM_BLE_SCAN_DISABLED_STATE; |
| } |
| else |
| { |
| BTM_TRACE_ERROR("BTM_BLE_BATCH_SCAN_SET_PARAMS - Invalid state after disabled"); |
| ble_batchscan_cb.cur_state = BTM_BLE_SCAN_INVALID_STATE; |
| } |
| } |
| |
| if (cb_evt != 0 && NULL != ble_batchscan_cb.p_setup_cback) |
| ble_batchscan_cb.p_setup_cback(cb_evt, ref_value, status); |
| break; |
| } |
| |
| case BTM_BLE_BATCH_SCAN_READ_RESULTS: |
| { |
| if (cb_evt != 0 && NULL != ble_batchscan_cb.p_scan_rep_cback) |
| { |
| STREAM_TO_UINT8(report_format,p); |
| STREAM_TO_UINT8(num_records, p); |
| p = (uint8_t *)(p_params->p_param_buf + 4); |
| BTM_TRACE_DEBUG("BTM_BLE_BATCH_SCAN_READ_RESULTS status=%d,len=%d,rec=%d", |
| status, len-4, num_records); |
| |
| if (0 == num_records) |
| { |
| btm_ble_batchscan_deq_rep_data(report_format, &ref_value, &num_records, |
| &p_data, &data_len); |
| if (NULL != ble_batchscan_cb.p_scan_rep_cback) |
| ble_batchscan_cb.p_scan_rep_cback(ref_value,report_format, num_records, |
| data_len, p_data, status); |
| } |
| else |
| { |
| if ((len-4) > 0) |
| { |
| btm_ble_batchscan_enq_rep_data(report_format, num_records, p, len-4); |
| /* More records could be in the buffer and needs to be pulled out */ |
| btm_status = btm_ble_read_batchscan_reports(report_format, ref_value); |
| if (BTM_CMD_STARTED != btm_status) |
| { |
| btm_ble_batchscan_deq_rep_data(report_format, &ref_value, &num_records, |
| &p_data, &data_len); |
| /* Send whatever is available, in case of a command failure */ |
| if (NULL != ble_batchscan_cb.p_scan_rep_cback && NULL != p_data) |
| ble_batchscan_cb.p_scan_rep_cback(ref_value,report_format, |
| num_records, data_len, p_data, status); |
| } |
| } |
| } |
| } |
| break; |
| } |
| |
| default: |
| break; |
| } |
| |
| return; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_set_storage_config |
| ** |
| ** Description This function writes the storage configuration in controller |
| ** |
| ** Parameters batch_scan_full_max -Max storage space (in %) allocated to full scanning |
| ** batch_scan_trunc_max -Max storage space (in %) allocated to truncated scanning |
| ** batch_scan_notify_threshold - Setup notification level based on total space |
| ** |
| ** Returns status |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS btm_ble_set_storage_config(UINT8 batch_scan_full_max, UINT8 batch_scan_trunc_max, |
| UINT8 batch_scan_notify_threshold) |
| { |
| tBTM_STATUS status = BTM_NO_RESOURCES; |
| UINT8 param[BTM_BLE_BATCH_SCAN_STORAGE_CFG_LEN], *pp; |
| |
| pp = param; |
| memset(param, 0, BTM_BLE_BATCH_SCAN_STORAGE_CFG_LEN); |
| |
| UINT8_TO_STREAM (pp, BTM_BLE_BATCH_SCAN_SET_STORAGE_PARAM); |
| UINT8_TO_STREAM (pp, batch_scan_full_max); |
| UINT8_TO_STREAM (pp, batch_scan_trunc_max); |
| UINT8_TO_STREAM (pp, batch_scan_notify_threshold); |
| |
| if ((status = BTM_VendorSpecificCommand (HCI_BLE_BATCH_SCAN_OCF, |
| BTM_BLE_BATCH_SCAN_STORAGE_CFG_LEN, param, |
| btm_ble_batchscan_vsc_cmpl_cback))!= BTM_CMD_STARTED) |
| { |
| BTM_TRACE_ERROR("btm_ble_set_storage_config %d", status); |
| return BTM_ILLEGAL_VALUE; |
| } |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_set_batchscan_param |
| ** |
| ** Description This function writes the batch scan params in controller |
| ** |
| ** Parameters scan_mode -Batch scan mode |
| ** scan_interval - Scan interval |
| ** scan_window - Scan window |
| ** discard_rule -Discard rules |
| ** addr_type - Address type |
| ** |
| ** Returns status |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS btm_ble_set_batchscan_param(tBTM_BLE_BATCH_SCAN_MODE scan_mode, |
| UINT32 scan_interval, UINT32 scan_window, tBLE_ADDR_TYPE addr_type, |
| tBTM_BLE_DISCARD_RULE discard_rule) |
| { |
| tBTM_STATUS status = BTM_NO_RESOURCES; |
| UINT8 scan_param[BTM_BLE_BATCH_SCAN_PARAM_CONFIG_LEN], *pp_scan; |
| |
| pp_scan = scan_param; |
| memset(scan_param, 0, BTM_BLE_BATCH_SCAN_PARAM_CONFIG_LEN); |
| |
| // Override param and decide addr_type based on own addr type |
| // TODO: Remove upper layer parameter? |
| addr_type = btm_cb.ble_ctr_cb.addr_mgnt_cb.own_addr_type; |
| |
| UINT8_TO_STREAM (pp_scan, BTM_BLE_BATCH_SCAN_SET_PARAMS); |
| UINT8_TO_STREAM (pp_scan, scan_mode); |
| UINT32_TO_STREAM (pp_scan, scan_window); |
| UINT32_TO_STREAM (pp_scan, scan_interval); |
| UINT8_TO_STREAM (pp_scan, addr_type); |
| UINT8_TO_STREAM (pp_scan, discard_rule); |
| |
| if ((status = BTM_VendorSpecificCommand (HCI_BLE_BATCH_SCAN_OCF, |
| BTM_BLE_BATCH_SCAN_PARAM_CONFIG_LEN, |
| scan_param, btm_ble_batchscan_vsc_cmpl_cback))!= BTM_CMD_STARTED) |
| { |
| BTM_TRACE_ERROR("btm_ble_set_batchscan_param %d", status); |
| return BTM_ILLEGAL_VALUE; |
| } |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_enable_disable_batchscan |
| ** |
| ** Description This function enables the customer specific feature in controller |
| ** |
| ** Parameters enable_disable: true - enable, false - disable |
| ** |
| ** Returns status |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS btm_ble_enable_disable_batchscan(BOOLEAN should_enable) |
| { |
| tBTM_STATUS status = BTM_NO_RESOURCES; |
| UINT8 shld_enable = 0x01; |
| UINT8 enable_param[BTM_BLE_BATCH_SCAN_ENB_DISB_LEN], *pp_enable; |
| |
| if (!should_enable) |
| shld_enable = 0x00; |
| |
| if (should_enable) |
| { |
| pp_enable = enable_param; |
| memset(enable_param, 0, BTM_BLE_BATCH_SCAN_ENB_DISB_LEN); |
| |
| UINT8_TO_STREAM (pp_enable, BTM_BLE_BATCH_SCAN_ENB_DISAB_CUST_FEATURE); |
| UINT8_TO_STREAM (pp_enable, shld_enable); |
| |
| if ((status = BTM_VendorSpecificCommand(HCI_BLE_BATCH_SCAN_OCF, |
| BTM_BLE_BATCH_SCAN_ENB_DISB_LEN, enable_param, |
| btm_ble_batchscan_vsc_cmpl_cback)) != BTM_CMD_STARTED) |
| { |
| status = BTM_MODE_UNSUPPORTED; |
| BTM_TRACE_ERROR("btm_ble_enable_disable_batchscan %d", status); |
| return BTM_ILLEGAL_VALUE; |
| } |
| } |
| else |
| if ((status = btm_ble_set_batchscan_param(BTM_BLE_BATCH_SCAN_MODE_DISABLE, |
| ble_batchscan_cb.scan_interval, ble_batchscan_cb.scan_window, |
| ble_batchscan_cb.addr_type, ble_batchscan_cb.discard_rule)) != BTM_CMD_STARTED) |
| { |
| status = BTM_MODE_UNSUPPORTED; |
| BTM_TRACE_ERROR("btm_ble_enable_disable_batchscan %d", status); |
| return BTM_ILLEGAL_VALUE; |
| } |
| |
| if (should_enable) |
| ble_batchscan_cb.cur_state = BTM_BLE_SCAN_ENABLE_CALLED; |
| else |
| ble_batchscan_cb.cur_state = BTM_BLE_SCAN_DISABLE_CALLED; |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleSetStorageConfig |
| ** |
| ** Description This function is called to write storage config params. |
| ** |
| ** Parameters: batch_scan_full_max - Max storage space (in %) allocated to full style |
| ** batch_scan_trunc_max - Max storage space (in %) allocated to trunc style |
| ** batch_scan_notify_threshold - Setup notification level based on total space |
| ** p_setup_cback - Setup callback pointer |
| ** p_thres_cback - Threshold callback pointer |
| ** p_rep_cback - Reports callback pointer |
| ** ref_value - Reference value |
| ** |
| ** Returns tBTM_STATUS |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_BleSetStorageConfig(UINT8 batch_scan_full_max, UINT8 batch_scan_trunc_max, |
| UINT8 batch_scan_notify_threshold, |
| tBTM_BLE_SCAN_SETUP_CBACK *p_setup_cback, |
| tBTM_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback, |
| tBTM_BLE_SCAN_REP_CBACK* p_rep_cback, |
| tBTM_BLE_REF_VALUE ref_value) |
| { |
| tBTM_STATUS status = BTM_NO_RESOURCES; |
| tBTM_BLE_VSC_CB cmn_ble_vsc_cb; |
| |
| BTM_TRACE_EVENT (" BTM_BleSetStorageConfig: %d, %d, %d, %d, %d", |
| ble_batchscan_cb.cur_state, ref_value, batch_scan_full_max, batch_scan_trunc_max, |
| batch_scan_notify_threshold); |
| |
| if (!controller_get_interface()->supports_ble()) |
| return BTM_ILLEGAL_VALUE; |
| |
| BTM_BleGetVendorCapabilities(&cmn_ble_vsc_cb); |
| |
| if (0 == cmn_ble_vsc_cb.tot_scan_results_strg) |
| { |
| BTM_TRACE_ERROR("Controller does not support batch scan"); |
| return BTM_ERR_PROCESSING; |
| } |
| |
| ble_batchscan_cb.p_setup_cback = p_setup_cback; |
| ble_batchscan_cb.p_thres_cback = p_thres_cback; |
| ble_batchscan_cb.p_scan_rep_cback = p_rep_cback; |
| ble_batchscan_cb.ref_value = ref_value; |
| |
| if (batch_scan_full_max > BTM_BLE_ADV_SCAN_FULL_MAX || |
| batch_scan_trunc_max > BTM_BLE_ADV_SCAN_TRUNC_MAX || |
| batch_scan_notify_threshold > BTM_BLE_ADV_SCAN_THR_MAX) |
| { |
| BTM_TRACE_ERROR("Illegal set storage config params"); |
| return BTM_ILLEGAL_VALUE; |
| } |
| |
| if (BTM_BLE_SCAN_INVALID_STATE == ble_batchscan_cb.cur_state || |
| BTM_BLE_SCAN_DISABLED_STATE == ble_batchscan_cb.cur_state || |
| BTM_BLE_SCAN_DISABLE_CALLED == ble_batchscan_cb.cur_state) |
| { |
| status = btm_ble_enable_disable_batchscan(TRUE); |
| if (BTM_CMD_STARTED != status) |
| return status; |
| |
| ble_batchscan_cb.cur_state = BTM_BLE_SCAN_ENABLE_CALLED; |
| btm_ble_batchscan_enq_op_q(BTM_BLE_BATCH_SCAN_ENB_DISAB_CUST_FEATURE, |
| BTM_BLE_SCAN_ENABLE_CALLED, 0, ref_value); |
| } |
| |
| status = btm_ble_set_storage_config(batch_scan_full_max, batch_scan_trunc_max, |
| batch_scan_notify_threshold); |
| if (BTM_CMD_STARTED != status) |
| return status; |
| /* The user needs to be provided scan config storage event */ |
| btm_ble_batchscan_enq_op_q(BTM_BLE_BATCH_SCAN_SET_STORAGE_PARAM, ble_batchscan_cb.cur_state, |
| BTM_BLE_BATCH_SCAN_CFG_STRG_EVT, ref_value); |
| |
| return status; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleEnableBatchScan |
| ** |
| ** Description This function is called to configure and enable batch scanning |
| ** |
| ** Parameters: scan_mode -Batch scan mode |
| ** scan_interval - Scan interval value |
| ** scan_window - Scan window value |
| ** discard_rule - Data discard rule |
| ** ref_value - Reference value |
| ** |
| ** Returns tBTM_STATUS |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_BleEnableBatchScan(tBTM_BLE_BATCH_SCAN_MODE scan_mode, |
| UINT32 scan_interval, UINT32 scan_window, tBLE_ADDR_TYPE addr_type, |
| tBTM_BLE_DISCARD_RULE discard_rule, tBTM_BLE_REF_VALUE ref_value) |
| { |
| tBTM_STATUS status = BTM_NO_RESOURCES; |
| tBTM_BLE_VSC_CB cmn_ble_vsc_cb; |
| BTM_TRACE_EVENT (" BTM_BleEnableBatchScan: %d, %d, %d, %d, %d, %d", |
| scan_mode, scan_interval, scan_window, addr_type, discard_rule, ref_value); |
| |
| if (!controller_get_interface()->supports_ble()) |
| return BTM_ILLEGAL_VALUE; |
| |
| BTM_BleGetVendorCapabilities(&cmn_ble_vsc_cb); |
| |
| if (0 == cmn_ble_vsc_cb.tot_scan_results_strg) |
| { |
| BTM_TRACE_ERROR("Controller does not support batch scan"); |
| return BTM_ERR_PROCESSING; |
| } |
| |
| BTM_TRACE_DEBUG("BTM_BleEnableBatchScan: %d, %x, %x, %d, %d", scan_mode, scan_interval, |
| scan_window, discard_rule, ble_batchscan_cb.cur_state); |
| |
| /* Only 16 bits will be used for scan interval and scan window as per agreement with Google */ |
| /* So the standard LE range would suffice for scan interval and scan window */ |
| if ((BTM_BLE_ISVALID_PARAM(scan_interval, BTM_BLE_SCAN_INT_MIN, BTM_BLE_SCAN_INT_MAX) || |
| BTM_BLE_ISVALID_PARAM(scan_window, BTM_BLE_SCAN_WIN_MIN, BTM_BLE_SCAN_WIN_MAX)) |
| && (BTM_BLE_BATCH_SCAN_MODE_PASS == scan_mode || BTM_BLE_BATCH_SCAN_MODE_ACTI == scan_mode |
| || BTM_BLE_BATCH_SCAN_MODE_PASS_ACTI == scan_mode) |
| && (BTM_BLE_DISCARD_OLD_ITEMS == discard_rule || |
| BTM_BLE_DISCARD_LOWER_RSSI_ITEMS == discard_rule)) |
| { |
| if (BTM_BLE_SCAN_INVALID_STATE == ble_batchscan_cb.cur_state || |
| BTM_BLE_SCAN_DISABLED_STATE == ble_batchscan_cb.cur_state || |
| BTM_BLE_SCAN_DISABLE_CALLED == ble_batchscan_cb.cur_state) |
| { |
| status = btm_ble_enable_disable_batchscan(TRUE); |
| if (BTM_CMD_STARTED != status) |
| return status; |
| btm_ble_batchscan_enq_op_q(BTM_BLE_BATCH_SCAN_ENB_DISAB_CUST_FEATURE, |
| BTM_BLE_SCAN_ENABLE_CALLED, 0, ref_value); |
| } |
| |
| ble_batchscan_cb.scan_mode = scan_mode; |
| ble_batchscan_cb.scan_interval = scan_interval; |
| ble_batchscan_cb.scan_window = scan_window; |
| ble_batchscan_cb.addr_type = addr_type; |
| ble_batchscan_cb.discard_rule = discard_rule; |
| /* This command starts batch scanning, if enabled */ |
| status = btm_ble_set_batchscan_param(scan_mode, scan_interval, scan_window, addr_type, |
| discard_rule); |
| if (BTM_CMD_STARTED != status) |
| return status; |
| |
| /* The user needs to be provided scan enable event */ |
| btm_ble_batchscan_enq_op_q(BTM_BLE_BATCH_SCAN_SET_PARAMS, ble_batchscan_cb.cur_state, |
| BTM_BLE_BATCH_SCAN_ENABLE_EVT, ref_value); |
| } |
| else |
| { |
| BTM_TRACE_ERROR("Illegal enable scan params"); |
| return BTM_ILLEGAL_VALUE; |
| } |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleDisableBatchScan |
| ** |
| ** Description This function is called to disable batch scanning |
| ** |
| ** Parameters: ref_value - Reference value |
| ** |
| ** Returns tBTM_STATUS |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_BleDisableBatchScan(tBTM_BLE_REF_VALUE ref_value) |
| { |
| tBTM_STATUS status = BTM_NO_RESOURCES; |
| tBTM_BLE_VSC_CB cmn_ble_vsc_cb; |
| BTM_TRACE_EVENT (" BTM_BleDisableBatchScan"); |
| |
| if (!controller_get_interface()->supports_ble()) |
| return BTM_ILLEGAL_VALUE; |
| |
| BTM_BleGetVendorCapabilities(&cmn_ble_vsc_cb); |
| |
| if (0 == cmn_ble_vsc_cb.tot_scan_results_strg) |
| { |
| BTM_TRACE_ERROR("Controller does not support batch scan"); |
| return BTM_ERR_PROCESSING; |
| } |
| |
| status = btm_ble_enable_disable_batchscan(FALSE); |
| if (BTM_CMD_STARTED == status) |
| { |
| /* The user needs to be provided scan disable event */ |
| btm_ble_batchscan_enq_op_q(BTM_BLE_BATCH_SCAN_SET_PARAMS, |
| BTM_BLE_SCAN_DISABLE_CALLED, BTM_BLE_BATCH_SCAN_DISABLE_EVT, |
| ref_value); |
| } |
| |
| return status; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleReadScanReports |
| ** |
| ** Description This function is called to start reading batch scan reports |
| ** |
| ** Parameters: scan_mode - Batch scan mode |
| ** ref_value - Reference value |
| ** |
| ** Returns tBTM_STATUS |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_BleReadScanReports(tBTM_BLE_BATCH_SCAN_MODE scan_mode, |
| tBTM_BLE_REF_VALUE ref_value) |
| { |
| tBTM_STATUS status = BTM_NO_RESOURCES; |
| tBTM_BLE_VSC_CB cmn_ble_vsc_cb; |
| UINT8 read_scan_mode = 0; |
| UINT8 *p_data = NULL, num_records = 0; |
| UINT16 data_len = 0; |
| |
| BTM_TRACE_EVENT (" BTM_BleReadScanReports; %d, %d", scan_mode, ref_value); |
| |
| if (!controller_get_interface()->supports_ble()) |
| return BTM_ILLEGAL_VALUE; |
| |
| BTM_BleGetVendorCapabilities(&cmn_ble_vsc_cb); |
| |
| if (0 == cmn_ble_vsc_cb.tot_scan_results_strg) |
| { |
| BTM_TRACE_ERROR("Controller does not support batch scan"); |
| return BTM_ERR_PROCESSING; |
| } |
| |
| /* Check if the requested scan mode has already been setup by the user */ |
| read_scan_mode = ble_batchscan_cb.scan_mode & BTM_BLE_BATCH_SCAN_MODE_ACTI; |
| if (0 == read_scan_mode) |
| read_scan_mode = ble_batchscan_cb.scan_mode & BTM_BLE_BATCH_SCAN_MODE_PASS; |
| |
| /* Check only for modes, as scan reports can be called after disabling batch scan */ |
| if (read_scan_mode > 0 && (BTM_BLE_BATCH_SCAN_MODE_PASS == scan_mode || |
| BTM_BLE_BATCH_SCAN_MODE_ACTI == scan_mode)) |
| { |
| status = btm_ble_batchscan_enq_rep_q(scan_mode, ref_value); |
| if (BTM_SUCCESS == status) |
| { |
| status = btm_ble_read_batchscan_reports(scan_mode, ref_value); |
| if (BTM_CMD_STARTED != status) |
| { |
| btm_ble_batchscan_deq_rep_data(scan_mode, &ref_value, |
| &num_records, &p_data, &data_len); |
| } |
| } |
| } |
| else |
| { |
| BTM_TRACE_ERROR("Illegal read scan params: %d, %d, %d", read_scan_mode, scan_mode, |
| ble_batchscan_cb.cur_state); |
| return BTM_ILLEGAL_VALUE; |
| } |
| return status; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function BTM_BleTrackAdvertiser |
| ** |
| ** Description This function is called to setup the callback for tracking advertisers |
| ** |
| ** Parameters: p_track_cback - Tracking callback pointer |
| ** ref_value - Reference value |
| ** |
| ** Returns tBTM_STATUS |
| ** |
| *******************************************************************************/ |
| tBTM_STATUS BTM_BleTrackAdvertiser(tBTM_BLE_TRACK_ADV_CBACK *p_track_cback, |
| tBTM_BLE_REF_VALUE ref_value) |
| { |
| tBTM_BLE_VSC_CB cmn_ble_vsc_cb; |
| BTM_TRACE_EVENT (" BTM_BleTrackAdvertiser"); |
| if (!controller_get_interface()->supports_ble()) |
| return BTM_ILLEGAL_VALUE; |
| |
| BTM_BleGetVendorCapabilities(&cmn_ble_vsc_cb); |
| |
| if (0 == cmn_ble_vsc_cb.tot_scan_results_strg) |
| { |
| BTM_TRACE_ERROR("Controller does not support scan storage"); |
| return BTM_ERR_PROCESSING; |
| } |
| |
| ble_advtrack_cb.p_track_cback = p_track_cback; |
| ble_advtrack_cb.ref_value = ref_value; |
| return BTM_CMD_STARTED; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_batchscan_init |
| ** |
| ** Description This function initialize the batch scan control block. |
| ** |
| ** Parameters None |
| ** |
| ** Returns status |
| ** |
| *******************************************************************************/ |
| void btm_ble_batchscan_init(void) |
| { |
| BTM_TRACE_EVENT (" btm_ble_batchscan_init"); |
| memset(&ble_batchscan_cb, 0, sizeof(tBTM_BLE_BATCH_SCAN_CB)); |
| memset(&ble_advtrack_cb, 0, sizeof(tBTM_BLE_ADV_TRACK_CB)); |
| BTM_RegisterForVSEvents(btm_ble_batchscan_filter_track_adv_vse_cback, TRUE); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function btm_ble_batchscan_cleanup |
| ** |
| ** Description This function cleans the batch scan control block. |
| ** |
| ** Parameters None |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void btm_ble_batchscan_cleanup(void) |
| { |
| int index = 0; |
| BTM_TRACE_EVENT (" btm_ble_batchscan_cleanup"); |
| |
| for (index = 0; index < BTM_BLE_BATCH_REP_MAIN_Q_SIZE; index++) |
| { |
| if (NULL != ble_batchscan_cb.main_rep_q.p_data[index]) |
| GKI_freebuf(ble_batchscan_cb.main_rep_q.p_data[index]); |
| ble_batchscan_cb.main_rep_q.p_data[index] = NULL; |
| } |
| |
| memset(&ble_batchscan_cb, 0, sizeof(tBTM_BLE_BATCH_SCAN_CB)); |
| memset(&ble_advtrack_cb, 0, sizeof(tBTM_BLE_ADV_TRACK_CB)); |
| } |
| |
| #endif |
