blob: 5079232e002cccbd9f20c1563f23a6153cd7c8aa [file] [log] [blame]
/******************************************************************************
*
* Copyright 2003-2014 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This is the public interface file for BTA, Broadcom's Bluetooth
* application layer for mobile phones.
*
******************************************************************************/
#ifndef BTA_API_H
#define BTA_API_H
#include <hardware/bt_common_types.h>
#include <memory>
#include "bt_target.h"
#include "bt_types.h"
#include "btm_api.h"
#include "btm_ble_api.h"
/*****************************************************************************
* Constants and data types
****************************************************************************/
/* Status Return Value */
#define BTA_SUCCESS 0 /* Successful operation. */
#define BTA_FAILURE 1 /* Generic failure. */
#define BTA_PENDING 2 /* API cannot be completed right now */
#define BTA_BUSY 3
#define BTA_NO_RESOURCES 4
#define BTA_WRONG_MODE 5
typedef uint8_t tBTA_STATUS;
/*
* Service ID
*
* NOTES: When you add a new Service ID for BTA AND require to change the value
* of BTA_MAX_SERVICE_ID, make sure that the correct security ID of the new
* service from Security service definitions (btm_api.h) should be added to
* bta_service_id_to_btm_srv_id_lkup_tbl table in bta_dm_act.cc
*/
#define BTA_RES_SERVICE_ID 0 /* Reserved */
#define BTA_SPP_SERVICE_ID 1 /* Serial port profile. */
#define BTA_DUN_SERVICE_ID 2 /* Dial-up networking profile. */
#define BTA_A2DP_SOURCE_SERVICE_ID 3 /* A2DP Source profile. */
#define BTA_LAP_SERVICE_ID 4 /* LAN access profile. */
#define BTA_HSP_SERVICE_ID 5 /* Headset profile. */
#define BTA_HFP_SERVICE_ID 6 /* Hands-free profile. */
#define BTA_OPP_SERVICE_ID 7 /* Object push */
#define BTA_FTP_SERVICE_ID 8 /* File transfer */
#define BTA_CTP_SERVICE_ID 9 /* Cordless Terminal */
#define BTA_ICP_SERVICE_ID 10 /* Intercom Terminal */
#define BTA_SYNC_SERVICE_ID 11 /* Synchronization */
#define BTA_BPP_SERVICE_ID 12 /* Basic printing profile */
#define BTA_BIP_SERVICE_ID 13 /* Basic Imaging profile */
#define BTA_PANU_SERVICE_ID 14 /* PAN User */
#define BTA_NAP_SERVICE_ID 15 /* PAN Network access point */
#define BTA_GN_SERVICE_ID 16 /* PAN Group Ad-hoc networks */
#define BTA_SAP_SERVICE_ID 17 /* SIM Access profile */
#define BTA_A2DP_SINK_SERVICE_ID 18 /* A2DP Sink */
#define BTA_AVRCP_SERVICE_ID 19 /* A/V remote control */
#define BTA_HID_SERVICE_ID 20 /* HID */
#define BTA_VDP_SERVICE_ID 21 /* Video distribution */
#define BTA_PBAP_SERVICE_ID 22 /* PhoneBook Access Server*/
#define BTA_HSP_HS_SERVICE_ID 23 /* HFP HS role */
#define BTA_HFP_HS_SERVICE_ID 24 /* HSP HS role */
#define BTA_MAP_SERVICE_ID 25 /* Message Access Profile */
#define BTA_MN_SERVICE_ID 26 /* Message Notification Service */
#define BTA_HDP_SERVICE_ID 27 /* Health Device Profile */
#define BTA_PCE_SERVICE_ID 28 /* PhoneBook Access Client */
#define BTA_SDP_SERVICE_ID 29 /* SDP Search */
#define BTA_HIDD_SERVICE_ID 30 /* HID Device */
/* BLE profile service ID */
#define BTA_BLE_SERVICE_ID 31 /* GATT profile */
#define BTA_USER_SERVICE_ID 32 /* User requested UUID */
#define BTA_MAX_SERVICE_ID 33
/* service IDs (BTM_SEC_SERVICE_FIRST_EMPTY + 1) to (BTM_SEC_MAX_SERVICES - 1)
* are used by BTA JV */
#define BTA_FIRST_JV_SERVICE_ID (BTM_SEC_SERVICE_FIRST_EMPTY + 1)
#define BTA_LAST_JV_SERVICE_ID (BTM_SEC_MAX_SERVICES - 1)
typedef uint8_t tBTA_SERVICE_ID;
/* Service ID Mask */
#define BTA_RES_SERVICE_MASK 0x00000001 /* Reserved */
#define BTA_SPP_SERVICE_MASK 0x00000002 /* Serial port profile. */
#define BTA_DUN_SERVICE_MASK 0x00000004 /* Dial-up networking profile. */
#define BTA_FAX_SERVICE_MASK 0x00000008 /* Fax profile. */
#define BTA_LAP_SERVICE_MASK 0x00000010 /* LAN access profile. */
#define BTA_HSP_SERVICE_MASK 0x00000020 /* HSP AG role. */
#define BTA_HFP_SERVICE_MASK 0x00000040 /* HFP AG role */
#define BTA_OPP_SERVICE_MASK 0x00000080 /* Object push */
#define BTA_FTP_SERVICE_MASK 0x00000100 /* File transfer */
#define BTA_CTP_SERVICE_MASK 0x00000200 /* Cordless Terminal */
#define BTA_ICP_SERVICE_MASK 0x00000400 /* Intercom Terminal */
#define BTA_SYNC_SERVICE_MASK 0x00000800 /* Synchronization */
#define BTA_BPP_SERVICE_MASK 0x00001000 /* Print server */
#define BTA_BIP_SERVICE_MASK 0x00002000 /* Basic Imaging */
#define BTA_PANU_SERVICE_MASK 0x00004000 /* PAN User */
#define BTA_NAP_SERVICE_MASK 0x00008000 /* PAN Network access point */
#define BTA_GN_SERVICE_MASK 0x00010000 /* PAN Group Ad-hoc networks */
#define BTA_SAP_SERVICE_MASK 0x00020000 /* PAN Group Ad-hoc networks */
#define BTA_A2DP_SERVICE_MASK 0x00040000 /* Advanced audio distribution */
#define BTA_AVRCP_SERVICE_MASK 0x00080000 /* A/V remote control */
#define BTA_HID_SERVICE_MASK 0x00100000 /* HID */
#define BTA_VDP_SERVICE_MASK 0x00200000 /* Video distribution */
#define BTA_PBAP_SERVICE_MASK 0x00400000 /* Phone Book Server */
#define BTA_HSP_HS_SERVICE_MASK 0x00800000 /* HFP HS role */
#define BTA_HFP_HS_SERVICE_MASK 0x01000000 /* HSP HS role */
#define BTA_MAS_SERVICE_MASK 0x02000000 /* Message Access Profile */
#define BTA_MN_SERVICE_MASK 0x04000000 /* Message Notification Profile */
#define BTA_HL_SERVICE_MASK 0x08000000 /* Health Device Profile */
#define BTA_PCE_SERVICE_MASK 0x10000000 /* Phone Book Client */
#define BTA_HIDD_SERVICE_MASK 0x20000000 /* HID Device */
#define BTA_BLE_SERVICE_MASK 0x40000000 /* GATT based service */
#define BTA_ALL_SERVICE_MASK 0x7FFFFFFF /* All services supported by BTA. */
#define BTA_USER_SERVICE_MASK 0x80000000 /* Message Notification Profile */
typedef uint32_t tBTA_SERVICE_MASK;
/* extended service mask, including mask with one or more GATT UUID */
typedef struct {
tBTA_SERVICE_MASK srvc_mask;
uint8_t num_uuid;
bluetooth::Uuid* p_uuid;
} tBTA_SERVICE_MASK_EXT;
/* Security Setting Mask */
#define BTA_SEC_NONE BTM_SEC_NONE /* No security. */
#define BTA_SEC_AUTHORIZE \
(BTM_SEC_IN_AUTHORIZE) /* Authorization required (only needed for out \
going connection )*/
#define BTA_SEC_AUTHENTICATE \
(BTM_SEC_IN_AUTHENTICATE | \
BTM_SEC_OUT_AUTHENTICATE) /* Authentication required. */
#define BTA_SEC_ENCRYPT \
(BTM_SEC_IN_ENCRYPT | BTM_SEC_OUT_ENCRYPT) /* Encryption required. */
typedef uint16_t tBTA_SEC;
/* Ignore for Discoverable, Connectable, Pairable and Connectable Paired only
* device modes */
#define BTA_DM_IGNORE 0x00FF
/* Ignore for Discoverable, Connectable only for LE modes */
#define BTA_DM_LE_IGNORE 0xFF00
#define BTA_APP_ID_PAN_MULTI 0xFE /* app id for pan multiple connection */
#define BTA_ALL_APP_ID 0xFF
/* Discoverable Modes */
#define BTA_DM_NON_DISC BTM_NON_DISCOVERABLE /* Device is not discoverable. */
#define BTA_DM_GENERAL_DISC \
BTM_GENERAL_DISCOVERABLE /* General discoverable. \
*/
#define BTA_DM_BLE_NON_DISCOVERABLE \
BTM_BLE_NON_DISCOVERABLE /* Device is not LE discoverable */
#define BTA_DM_BLE_GENERAL_DISCOVERABLE \
BTM_BLE_GENERAL_DISCOVERABLE /* Device is LE General discoverable */
#define BTA_DM_BLE_LIMITED_DISCOVERABLE \
BTM_BLE_LIMITED_DISCOVERABLE /* Device is LE Limited discoverable */
typedef uint16_t
tBTA_DM_DISC; /* this discoverability mode is a bit mask among BR mode and
LE mode */
/* Connectable Modes */
#define BTA_DM_NON_CONN BTM_NON_CONNECTABLE /* Device is not connectable. */
#define BTA_DM_CONN BTM_CONNECTABLE /* Device is connectable. */
#define BTA_DM_BLE_NON_CONNECTABLE \
BTM_BLE_NON_CONNECTABLE /* Device is LE non-connectable. */
#define BTA_DM_BLE_CONNECTABLE \
BTM_BLE_CONNECTABLE /* Device is LE connectable. */
typedef uint16_t tBTA_DM_CONN;
#define BTA_TRANSPORT_UNKNOWN 0
#define BTA_TRANSPORT_BR_EDR BT_TRANSPORT_BR_EDR
#define BTA_TRANSPORT_LE BT_TRANSPORT_LE
typedef tBT_TRANSPORT tBTA_TRANSPORT;
/* Pairable Modes */
#define BTA_DM_PAIRABLE 1
#define BTA_DM_NON_PAIRABLE 0
/* Connectable Paired Only Mode */
#define BTA_DM_CONN_ALL 0
#define BTA_DM_CONN_PAIRED 1
/* Inquiry Modes */
#define BTA_DM_INQUIRY_NONE BTM_INQUIRY_NONE /*No BR inquiry. */
#define BTA_DM_GENERAL_INQUIRY \
BTM_GENERAL_INQUIRY /* Perform general inquiry. */
#define BTA_DM_LIMITED_INQUIRY \
BTM_LIMITED_INQUIRY /* Perform limited inquiry. */
#define BTA_BLE_INQUIRY_NONE BTM_BLE_INQUIRY_NONE
#define BTA_BLE_GENERAL_INQUIRY \
BTM_BLE_GENERAL_INQUIRY /* Perform LE general inquiry. */
#define BTA_BLE_LIMITED_INQUIRY \
BTM_BLE_LIMITED_INQUIRY /* Perform LE limited inquiry. */
typedef uint8_t tBTA_DM_INQ_MODE;
/* Inquiry Filter Type */
#define BTA_DM_INQ_CLR BTM_CLR_INQUIRY_FILTER /* Clear inquiry filter. */
#define BTA_DM_INQ_DEV_CLASS \
BTM_FILTER_COND_DEVICE_CLASS /* Filter on device class. */
#define BTA_DM_INQ_BD_ADDR \
BTM_FILTER_COND_BD_ADDR /* Filter on a specific BD address. */
typedef uint8_t tBTA_DM_INQ_FILT;
/* Authorize Response */
#define BTA_DM_AUTH_PERM \
0 /* Authorized for future connections to the service */
#define BTA_DM_AUTH_TEMP 1 /* Authorized for current connection only */
#define BTA_DM_NOT_AUTH 2 /* Not authorized for the service */
typedef uint8_t tBTA_AUTH_RESP;
/* M/S preferred roles */
#define BTA_ANY_ROLE 0x00
#define BTA_MASTER_ROLE_PREF 0x01
#define BTA_MASTER_ROLE_ONLY 0x02
#define BTA_SLAVE_ROLE_ONLY \
0x03 /* Used for PANU only, skip role switch to master */
typedef uint8_t tBTA_PREF_ROLES;
enum {
BTA_DM_NO_SCATTERNET, /* Device doesn't support scatternet, it might
support "role switch during connection" for
an incoming connection, when it already has
another connection in master role */
BTA_DM_PARTIAL_SCATTERNET, /* Device supports partial scatternet. It can have
simulateous connection in Master and Slave roles
for short period of time */
BTA_DM_FULL_SCATTERNET /* Device can have simultaneous connection in master
and slave roles */
};
/* Inquiry filter device class condition */
typedef struct {
DEV_CLASS dev_class; /* device class of interest */
DEV_CLASS dev_class_mask; /* mask to determine the bits of device class of
interest */
} tBTA_DM_COD_COND;
/* Inquiry Filter Condition */
typedef union {
RawAddress bd_addr; /* BD address of device to filter. */
tBTA_DM_COD_COND dev_class_cond; /* Device class filter condition */
} tBTA_DM_INQ_COND;
/* Inquiry Parameters */
typedef struct {
tBTA_DM_INQ_MODE mode; /* Inquiry mode, limited or general. */
uint8_t duration; /* Inquiry duration in 1.28 sec units. */
uint8_t max_resps; /* Maximum inquiry responses. Set to zero for unlimited
responses. */
bool report_dup; /* report duplicated inquiry response with higher RSSI value
*/
tBTA_DM_INQ_FILT filter_type; /* Filter condition type. */
tBTA_DM_INQ_COND filter_cond; /* Filter condition data. */
} tBTA_DM_INQ;
typedef struct {
uint8_t bta_dm_eir_min_name_len; /* minimum length of local name when it is
shortened */
#if (BTA_EIR_CANNED_UUID_LIST == TRUE)
uint8_t bta_dm_eir_uuid16_len; /* length of 16-bit UUIDs */
uint8_t* bta_dm_eir_uuid16; /* 16-bit UUIDs */
#else
uint32_t uuid_mask[BTM_EIR_SERVICE_ARRAY_SIZE]; /* mask of UUID list in EIR */
#endif
int8_t* bta_dm_eir_inq_tx_power; /* Inquiry TX power */
uint8_t bta_dm_eir_flag_len; /* length of flags in bytes */
uint8_t* bta_dm_eir_flags; /* flags for EIR */
uint8_t bta_dm_eir_manufac_spec_len; /* length of manufacturer specific in
bytes */
uint8_t* bta_dm_eir_manufac_spec; /* manufacturer specific */
uint8_t bta_dm_eir_additional_len; /* length of additional data in bytes */
uint8_t* bta_dm_eir_additional; /* additional data */
} tBTA_DM_EIR_CONF;
/* advertising filter policy */
typedef tBTM_BLE_AFP tBTA_BLE_AFP;
enum {
BTA_BLE_BATCH_SCAN_MODE_PASS = 1,
BTA_BLE_BATCH_SCAN_MODE_ACTI = 2,
BTA_BLE_BATCH_SCAN_MODE_PASS_ACTI = 3
};
typedef uint8_t tBTA_BLE_BATCH_SCAN_MODE;
enum { BTA_BLE_DISCARD_OLD_ITEMS = 0, BTA_BLE_DISCARD_LOWER_RSSI_ITEMS = 1 };
typedef uint8_t tBTA_BLE_DISCARD_RULE;
enum { BTA_BLE_ADV_SEEN_FIRST_TIME = 0, BTA_BLE_ADV_TRACKING_TIMEOUT = 1 };
typedef uint8_t tBTA_BLE_ADV_CHANGE_REASON;
/* BLE customer specific feature function type definitions */
/* data type used on customer specific feature for RSSI monitoring */
#define BTA_BLE_RSSI_ALERT_HI 0
#define BTA_BLE_RSSI_ALERT_RANGE 1
#define BTA_BLE_RSSI_ALERT_LO 2
typedef uint8_t tBTA_DM_BLE_RSSI_ALERT_TYPE;
#define BTA_BLE_RSSI_ALERT_NONE BTM_BLE_RSSI_ALERT_NONE /* (0) */
#define BTA_BLE_RSSI_ALERT_HI_BIT BTM_BLE_RSSI_ALERT_HI_BIT /* (1) */
#define BTA_BLE_RSSI_ALERT_RANGE_BIT \
BTM_BLE_RSSI_ALERT_RANGE_BIT /* (1 << 1) */
#define BTA_BLE_RSSI_ALERT_LO_BIT BTM_BLE_RSSI_ALERT_LO_BIT /* (1 << 2) */
typedef uint8_t tBTA_DM_BLE_RSSI_ALERT_MASK;
typedef void(tBTA_DM_BLE_RSSI_CBACK)(const RawAddress& bd_addr,
tBTA_DM_BLE_RSSI_ALERT_TYPE alert_type,
int8_t rssi);
typedef int8_t tBTA_DM_RSSI_VALUE;
typedef uint8_t tBTA_DM_LINK_QUALITY_VALUE;
typedef uint8_t tBTA_SIG_STRENGTH_MASK;
/* Security Callback Events */
#define BTA_DM_ENABLE_EVT 0 /* Enable Event */
#define BTA_DM_DISABLE_EVT 1 /* Disable Event */
#define BTA_DM_PIN_REQ_EVT 2 /* PIN request. */
#define BTA_DM_AUTH_CMPL_EVT 3 /* Authentication complete indication. */
#define BTA_DM_AUTHORIZE_EVT 4 /* Authorization request. */
#define BTA_DM_LINK_UP_EVT 5 /* Connection UP event */
#define BTA_DM_LINK_DOWN_EVT 6 /* Connection DOWN event */
#define BTA_DM_SIG_STRENGTH_EVT \
7 /* Signal strength for bluetooth connection \
*/
#define BTA_DM_BUSY_LEVEL_EVT 8 /* System busy level */
#define BTA_DM_BOND_CANCEL_CMPL_EVT 9 /* Bond cancel complete indication */
#define BTA_DM_SP_CFM_REQ_EVT \
10 /* Simple Pairing User Confirmation request. \
*/
#define BTA_DM_SP_KEY_NOTIF_EVT 11 /* Simple Pairing Passkey Notification */
#define BTA_DM_SP_RMT_OOB_EVT 12 /* Simple Pairing Remote OOB Data request. */
#define BTA_DM_SP_KEYPRESS_EVT 13 /* Key press notification event. */
#define BTA_DM_ROLE_CHG_EVT 14 /* Role Change event. */
#define BTA_DM_BLE_KEY_EVT 15 /* BLE SMP key event for peer device keys */
#define BTA_DM_BLE_SEC_REQ_EVT 16 /* BLE SMP security request */
#define BTA_DM_BLE_PASSKEY_NOTIF_EVT 17 /* SMP passkey notification event */
#define BTA_DM_BLE_PASSKEY_REQ_EVT 18 /* SMP passkey request event */
#define BTA_DM_BLE_OOB_REQ_EVT 19 /* SMP OOB request event */
#define BTA_DM_BLE_LOCAL_IR_EVT 20 /* BLE local IR event */
#define BTA_DM_BLE_LOCAL_ER_EVT 21 /* BLE local ER event */
#define BTA_DM_BLE_NC_REQ_EVT 22 /* SMP Numeric Comparison request event */
#define BTA_DM_SP_RMT_OOB_EXT_EVT \
23 /* Simple Pairing Remote OOB Extended Data request. */
#define BTA_DM_BLE_AUTH_CMPL_EVT 24 /* BLE Auth complete */
#define BTA_DM_DEV_UNPAIRED_EVT 25
#define BTA_DM_HW_ERROR_EVT 26 /* BT Chip H/W error */
#define BTA_DM_LE_FEATURES_READ \
27 /* Cotroller specific LE features are read \
*/
#define BTA_DM_ENER_INFO_READ 28 /* Energy info read */
#define BTA_DM_BLE_SC_OOB_REQ_EVT 29 /* SMP SC OOB request event */
typedef uint8_t tBTA_DM_SEC_EVT;
/* Structure associated with BTA_DM_ENABLE_EVT */
typedef struct { tBTA_STATUS status; } tBTA_DM_ENABLE;
/* Structure associated with BTA_DM_PIN_REQ_EVT */
typedef struct {
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in
* order */
RawAddress bd_addr; /* BD address peer device. */
DEV_CLASS dev_class; /* Class of Device */
BD_NAME bd_name; /* Name of peer device. */
bool min_16_digit; /* true if the pin returned must be at least 16 digits */
} tBTA_DM_PIN_REQ;
/* BLE related definition */
#define BTA_DM_AUTH_FAIL_BASE (HCI_ERR_MAX_ERR + 10)
/* Converts SMP error codes defined in smp_api.h to SMP auth fail reasons below.
*/
#define BTA_DM_AUTH_CONVERT_SMP_CODE(x) (BTA_DM_AUTH_FAIL_BASE + (x))
#define BTA_DM_AUTH_SMP_PASSKEY_FAIL \
(BTA_DM_AUTH_FAIL_BASE + SMP_PASSKEY_ENTRY_FAIL)
#define BTA_DM_AUTH_SMP_OOB_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_OOB_FAIL)
#define BTA_DM_AUTH_SMP_PAIR_AUTH_FAIL \
(BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_AUTH_FAIL)
#define BTA_DM_AUTH_SMP_CONFIRM_VALUE_FAIL \
(BTA_DM_AUTH_FAIL_BASE + SMP_CONFIRM_VALUE_ERR)
#define BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT \
(BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_NOT_SUPPORT)
#define BTA_DM_AUTH_SMP_ENC_KEY_SIZE (BTA_DM_AUTH_FAIL_BASE + SMP_ENC_KEY_SIZE)
#define BTA_DM_AUTH_SMP_INVALID_CMD (BTA_DM_AUTH_FAIL_BASE + SMP_INVALID_CMD)
#define BTA_DM_AUTH_SMP_UNKNOWN_ERR \
(BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_FAIL_UNKNOWN)
#define BTA_DM_AUTH_SMP_REPEATED_ATTEMPT \
(BTA_DM_AUTH_FAIL_BASE + SMP_REPEATED_ATTEMPTS)
#define BTA_DM_AUTH_SMP_INVALID_PARAMETERS \
(BTA_DM_AUTH_FAIL_BASE + SMP_INVALID_PARAMETERS)
#define BTA_DM_AUTH_SMP_INTERNAL_ERR \
(BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_INTERNAL_ERR)
#define BTA_DM_AUTH_SMP_UNKNOWN_IO (BTA_DM_AUTH_FAIL_BASE + SMP_UNKNOWN_IO_CAP)
#define BTA_DM_AUTH_SMP_INIT_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_INIT_FAIL)
#define BTA_DM_AUTH_SMP_CONFIRM_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_CONFIRM_FAIL)
#define BTA_DM_AUTH_SMP_BUSY (BTA_DM_AUTH_FAIL_BASE + SMP_BUSY)
#define BTA_DM_AUTH_SMP_ENC_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_ENC_FAIL)
#define BTA_DM_AUTH_SMP_RSP_TIMEOUT (BTA_DM_AUTH_FAIL_BASE + SMP_RSP_TIMEOUT)
#define BTA_DM_AUTH_SMP_CONN_TOUT (BTA_DM_AUTH_FAIL_BASE + SMP_CONN_TOUT)
/* connection parameter boundary value and dummy value */
#define BTA_DM_BLE_SCAN_INT_MIN BTM_BLE_SCAN_INT_MIN
#define BTA_DM_BLE_SCAN_INT_MAX BTM_BLE_SCAN_INT_MAX
#define BTA_DM_BLE_SCAN_WIN_MIN BTM_BLE_SCAN_WIN_MIN
#define BTA_DM_BLE_SCAN_WIN_MAX BTM_BLE_SCAN_WIN_MAX
#define BTA_DM_BLE_CONN_INT_MIN BTM_BLE_CONN_INT_MIN
#define BTA_DM_BLE_CONN_INT_MAX BTM_BLE_CONN_INT_MAX
#define BTA_DM_BLE_CONN_LATENCY_MAX BTM_BLE_CONN_LATENCY_MAX
#define BTA_DM_BLE_CONN_SUP_TOUT_MIN BTM_BLE_CONN_SUP_TOUT_MIN
#define BTA_DM_BLE_CONN_SUP_TOUT_MAX BTM_BLE_CONN_SUP_TOUT_MAX
#define BTA_DM_BLE_CONN_PARAM_UNDEF \
BTM_BLE_CONN_PARAM_UNDEF /* use this value when a specific value not to be \
overwritten */
#define BTA_LE_KEY_PENC \
BTM_LE_KEY_PENC /* encryption information of peer device */
#define BTA_LE_KEY_PID BTM_LE_KEY_PID /* identity key of the peer device */
#define BTA_LE_KEY_PCSRK BTM_LE_KEY_PCSRK /* peer SRK */
#define BTA_LE_KEY_LENC \
BTM_LE_KEY_LENC /* master role security information:div */
#define BTA_LE_KEY_LID BTM_LE_KEY_LID /* master device ID key */
#define BTA_LE_KEY_LCSRK \
BTM_LE_KEY_LCSRK /* local CSRK has been deliver to peer */
typedef uint8_t tBTA_LE_KEY_TYPE; /* can be used as a bit mask */
typedef tBTM_LE_PENC_KEYS tBTA_LE_PENC_KEYS;
typedef tBTM_LE_PCSRK_KEYS tBTA_LE_PCSRK_KEYS;
typedef tBTM_LE_LENC_KEYS tBTA_LE_LENC_KEYS;
typedef tBTM_LE_LCSRK_KEYS tBTA_LE_LCSRK_KEYS;
typedef tBTM_LE_PID_KEYS tBTA_LE_PID_KEYS;
typedef union {
tBTA_LE_PENC_KEYS penc_key; /* received peer encryption key */
tBTA_LE_PCSRK_KEYS psrk_key; /* received peer device SRK */
tBTA_LE_PID_KEYS pid_key; /* peer device ID key */
tBTA_LE_LENC_KEYS
lenc_key; /* local encryption reproduction keys LTK = = d1(ER,DIV,0)*/
tBTA_LE_LCSRK_KEYS lcsrk_key; /* local device CSRK = d1(ER,DIV,1)*/
tBTA_LE_PID_KEYS lid_key; /* local device ID key for the particular remote */
} tBTA_LE_KEY_VALUE;
#define BTA_BLE_LOCAL_KEY_TYPE_ID 1
#define BTA_BLE_LOCAL_KEY_TYPE_ER 2
typedef uint8_t tBTA_DM_BLE_LOCAL_KEY_MASK;
typedef struct {
Octet16 ir;
Octet16 irk;
Octet16 dhk;
} tBTA_BLE_LOCAL_ID_KEYS;
#define BTA_DM_SEC_GRANTED BTA_SUCCESS
#define BTA_DM_SEC_PAIR_NOT_SPT BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT
#define BTA_DM_SEC_REP_ATTEMPTS BTA_DM_AUTH_SMP_REPEATED_ATTEMPT
typedef uint8_t tBTA_DM_BLE_SEC_GRANT;
/* Structure associated with BTA_DM_BLE_SEC_REQ_EVT */
typedef struct {
RawAddress bd_addr; /* peer address */
BD_NAME bd_name; /* peer device name */
} tBTA_DM_BLE_SEC_REQ;
typedef struct {
RawAddress bd_addr; /* peer address */
tBTM_LE_KEY_TYPE key_type;
tBTM_LE_KEY_VALUE* p_key_value;
} tBTA_DM_BLE_KEY;
/* Structure associated with BTA_DM_AUTH_CMPL_EVT */
typedef struct {
RawAddress bd_addr; /* BD address peer device. */
BD_NAME bd_name; /* Name of peer device. */
bool key_present; /* Valid link key value in key element */
LinkKey key; /* Link key associated with peer device. */
uint8_t key_type; /* The type of Link Key */
bool success; /* true of authentication succeeded, false if failed. */
uint8_t fail_reason; /* The HCI reason/error code for when success=false */
tBLE_ADDR_TYPE addr_type; /* Peer device address type */
tBT_DEVICE_TYPE dev_type;
} tBTA_DM_AUTH_CMPL;
/* Structure associated with BTA_DM_AUTHORIZE_EVT */
typedef struct {
RawAddress bd_addr; /* BD address peer device. */
BD_NAME bd_name; /* Name of peer device. */
tBTA_SERVICE_ID service; /* Service ID to authorize. */
DEV_CLASS dev_class;
} tBTA_DM_AUTHORIZE;
/* Structure associated with BTA_DM_LINK_UP_EVT */
typedef struct {
RawAddress bd_addr; /* BD address peer device. */
tBTA_TRANSPORT link_type;
} tBTA_DM_LINK_UP;
/* Structure associated with BTA_DM_LINK_DOWN_EVT */
typedef struct {
RawAddress bd_addr; /* BD address peer device. */
uint8_t status; /* connection open/closed */
bool is_removed; /* true if device is removed when link is down */
tBTA_TRANSPORT link_type;
} tBTA_DM_LINK_DOWN;
/* Structure associated with BTA_DM_ROLE_CHG_EVT */
typedef struct {
RawAddress bd_addr; /* BD address peer device. */
uint8_t new_role; /* the new connection role */
} tBTA_DM_ROLE_CHG;
/* Structure associated with BTA_DM_BUSY_LEVEL_EVT */
typedef struct {
uint8_t level; /* when paging or inquiring, level is 10.
Otherwise, the number of ACL links */
uint8_t level_flags; /* indicates individual flags */
} tBTA_DM_BUSY_LEVEL;
#define BTA_IO_CAP_OUT BTM_IO_CAP_OUT /* 0 DisplayOnly */
#define BTA_IO_CAP_IO BTM_IO_CAP_IO /* 1 DisplayYesNo */
#define BTA_IO_CAP_IN BTM_IO_CAP_IN /* 2 KeyboardOnly */
#define BTA_IO_CAP_NONE BTM_IO_CAP_NONE /* 3 NoInputNoOutput */
#define BTA_IO_CAP_KBDISP BTM_IO_CAP_KBDISP /* 4 Keyboard display */
typedef tBTM_IO_CAP tBTA_IO_CAP;
#define BTA_AUTH_SP_NO \
BTM_AUTH_SP_NO /* 0 MITM Protection Not Required - Single \
Profile/non-bonding \
Numeric comparison with automatic accept allowed */
#define BTA_AUTH_SP_YES \
BTM_AUTH_SP_YES /* 1 MITM Protection Required - Single Profile/non-bonding \
Use IO Capabilities to determine authentication procedure \
*/
#define BTA_AUTH_AP_NO \
BTM_AUTH_AP_NO /* 2 MITM Protection Not Required - All Profiles/dedicated \
bonding \
Numeric comparison with automatic accept allowed */
#define BTA_AUTH_AP_YES \
BTM_AUTH_AP_YES /* 3 MITM Protection Required - All Profiles/dedicated \
bonding \
Use IO Capabilities to determine authentication procedure \
*/
#define BTA_AUTH_SPGB_NO \
BTM_AUTH_SPGB_NO /* 4 MITM Protection Not Required - Single Profiles/general \
bonding \
Numeric comparison with automatic accept allowed */
#define BTA_AUTH_SPGB_YES \
BTM_AUTH_SPGB_YES /* 5 MITM Protection Required - Single Profiles/general \
bonding \
Use IO Capabilities to determine authentication \
procedure */
typedef tBTM_AUTH_REQ tBTA_AUTH_REQ;
#define BTA_AUTH_DD_BOND \
BTM_AUTH_DD_BOND /* 2 this bit is set for dedicated bonding */
#define BTA_AUTH_GEN_BOND \
BTM_AUTH_SPGB_NO /* 4 this bit is set for general bonding */
#define BTA_AUTH_BONDS \
BTM_AUTH_BONDS /* 6 the general/dedicated bonding bits */
#define BTA_LE_AUTH_NO_BOND BTM_LE_AUTH_REQ_NO_BOND /* 0*/
#define BTA_LE_AUTH_BOND BTM_LE_AUTH_REQ_BOND /* 1 << 0 */
#define BTA_LE_AUTH_REQ_MITM BTM_LE_AUTH_REQ_MITM /* 1 << 2 */
#define BTA_LE_AUTH_REQ_SC_ONLY BTM_LE_AUTH_REQ_SC_ONLY /* 1 << 3 */
#define BTA_LE_AUTH_REQ_SC_BOND BTM_LE_AUTH_REQ_SC_BOND /* 1001 */
#define BTA_LE_AUTH_REQ_SC_MITM BTM_LE_AUTH_REQ_SC_MITM /* 1100 */
#define BTA_LE_AUTH_REQ_SC_MITM_BOND BTM_LE_AUTH_REQ_SC_MITM_BOND /* 1101 */
typedef tBTM_LE_AUTH_REQ
tBTA_LE_AUTH_REQ; /* combination of the above bit pattern */
#define BTA_OOB_NONE BTM_OOB_NONE
#define BTA_OOB_PRESENT BTM_OOB_PRESENT
#define BTA_OOB_UNKNOWN BTM_OOB_UNKNOWN
typedef tBTM_OOB_DATA tBTA_OOB_DATA;
/* Structure associated with BTA_DM_SP_CFM_REQ_EVT */
typedef struct {
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in
* order */
RawAddress bd_addr; /* peer address */
DEV_CLASS dev_class; /* peer CoD */
BD_NAME bd_name; /* peer device name */
uint32_t num_val; /* the numeric value for comparison. If just_works, do not
show this number to UI */
bool just_works; /* true, if "Just Works" association model */
tBTA_AUTH_REQ loc_auth_req; /* Authentication required for local device */
tBTA_AUTH_REQ rmt_auth_req; /* Authentication required for peer device */
tBTA_IO_CAP loc_io_caps; /* IO Capabilities of local device */
tBTA_AUTH_REQ rmt_io_caps; /* IO Capabilities of remote device */
} tBTA_DM_SP_CFM_REQ;
enum {
BTA_SP_KEY_STARTED, /* passkey entry started */
BTA_SP_KEY_ENTERED, /* passkey digit entered */
BTA_SP_KEY_ERASED, /* passkey digit erased */
BTA_SP_KEY_CLEARED, /* passkey cleared */
BTA_SP_KEY_COMPLT /* passkey entry completed */
};
typedef uint8_t tBTA_SP_KEY_TYPE;
/* Structure associated with BTA_DM_SP_KEYPRESS_EVT */
typedef struct {
RawAddress bd_addr; /* peer address */
tBTA_SP_KEY_TYPE notif_type;
} tBTA_DM_SP_KEY_PRESS;
/* Structure associated with BTA_DM_SP_KEY_NOTIF_EVT */
typedef struct {
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in
* order */
RawAddress bd_addr; /* peer address */
DEV_CLASS dev_class; /* peer CoD */
BD_NAME bd_name; /* peer device name */
uint32_t passkey; /* the numeric value for comparison. If just_works, do not
show this number to UI */
} tBTA_DM_SP_KEY_NOTIF;
/* Structure associated with BTA_DM_SP_RMT_OOB_EVT */
typedef struct {
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in
* order */
RawAddress bd_addr; /* peer address */
DEV_CLASS dev_class; /* peer CoD */
BD_NAME bd_name; /* peer device name */
} tBTA_DM_SP_RMT_OOB;
/* Structure associated with BTA_DM_BOND_CANCEL_CMPL_EVT */
typedef struct {
tBTA_STATUS result; /* true of bond cancel succeeded, false if failed. */
} tBTA_DM_BOND_CANCEL_CMPL;
/* Union of all security callback structures */
typedef union {
tBTA_DM_ENABLE enable; /* BTA enabled */
tBTA_DM_PIN_REQ pin_req; /* PIN request. */
tBTA_DM_AUTH_CMPL auth_cmpl; /* Authentication complete indication. */
tBTA_DM_AUTHORIZE authorize; /* Authorization request. */
tBTA_DM_LINK_UP link_up; /* ACL connection down event */
tBTA_DM_LINK_DOWN link_down; /* ACL connection down event */
tBTA_DM_BUSY_LEVEL busy_level; /* System busy level */
tBTA_DM_SP_CFM_REQ cfm_req; /* user confirm request */
tBTA_DM_SP_KEY_NOTIF key_notif; /* passkey notification */
tBTA_DM_SP_RMT_OOB rmt_oob; /* remote oob */
tBTA_DM_BOND_CANCEL_CMPL
bond_cancel_cmpl; /* Bond Cancel Complete indication */
tBTA_DM_SP_KEY_PRESS key_press; /* key press notification event */
tBTA_DM_ROLE_CHG role_chg; /* role change event */
tBTA_DM_BLE_SEC_REQ ble_req; /* BLE SMP related request */
tBTA_DM_BLE_KEY ble_key; /* BLE SMP keys used when pairing */
tBTA_BLE_LOCAL_ID_KEYS ble_id_keys; /* IR event */
Octet16 ble_er; /* ER event data */
} tBTA_DM_SEC;
/* Security callback */
typedef void(tBTA_DM_SEC_CBACK)(tBTA_DM_SEC_EVT event, tBTA_DM_SEC* p_data);
#define BTA_DM_BLE_PF_LIST_LOGIC_OR 1
#define BTA_DM_BLE_PF_FILT_LOGIC_OR 0
/* Search callback events */
#define BTA_DM_INQ_RES_EVT 0 /* Inquiry result for a peer device. */
#define BTA_DM_INQ_CMPL_EVT 1 /* Inquiry complete. */
#define BTA_DM_DISC_RES_EVT 2 /* Discovery result for a peer device. */
#define BTA_DM_DISC_BLE_RES_EVT \
3 /* Discovery result for BLE GATT based servoce on a peer device. */
#define BTA_DM_DISC_CMPL_EVT 4 /* Discovery complete. */
#define BTA_DM_DI_DISC_CMPL_EVT 5 /* Discovery complete. */
#define BTA_DM_SEARCH_CANCEL_CMPL_EVT 6 /* Search cancelled */
typedef uint8_t tBTA_DM_SEARCH_EVT;
#define BTA_DM_INQ_RES_IGNORE_RSSI \
BTM_INQ_RES_IGNORE_RSSI /* 0x7f RSSI value not supplied (ignore it) */
/* Structure associated with BTA_DM_INQ_RES_EVT */
typedef struct {
RawAddress bd_addr; /* BD address peer device. */
DEV_CLASS dev_class; /* Device class of peer device. */
bool remt_name_not_required; /* Application sets this flag if it already knows
the name of the device */
/* If the device name is known to application BTA skips the remote name
* request */
bool is_limited; /* true, if the limited inquiry bit is set in the CoD */
int8_t rssi; /* The rssi value */
uint8_t* p_eir; /* received EIR */
uint16_t eir_len; /* received EIR length */
uint8_t inq_result_type;
uint8_t ble_addr_type;
uint16_t ble_evt_type;
uint8_t ble_primary_phy;
uint8_t ble_secondary_phy;
uint8_t ble_advertising_sid;
int8_t ble_tx_power;
uint16_t ble_periodic_adv_int;
tBT_DEVICE_TYPE device_type;
uint8_t flag;
} tBTA_DM_INQ_RES;
/* Structure associated with BTA_DM_INQ_CMPL_EVT */
typedef struct {
uint8_t num_resps; /* Number of inquiry responses. */
} tBTA_DM_INQ_CMPL;
/* Structure associated with BTA_DM_DI_DISC_CMPL_EVT */
typedef struct {
RawAddress bd_addr; /* BD address peer device. */
uint8_t num_record; /* Number of DI record */
tBTA_STATUS result;
} tBTA_DM_DI_DISC_CMPL;
/* Structure associated with BTA_DM_DISC_RES_EVT */
typedef struct {
RawAddress bd_addr; /* BD address peer device. */
BD_NAME bd_name; /* Name of peer device. */
tBTA_SERVICE_MASK services; /* Services found on peer device. */
uint8_t* p_raw_data; /* Raw data for discovery DB */
uint32_t raw_data_size; /* size of raw data */
tBT_DEVICE_TYPE device_type; /* device type in case it is BLE device */
uint32_t num_uuids;
bluetooth::Uuid* p_uuid_list;
tBTA_STATUS result;
} tBTA_DM_DISC_RES;
/* Structure associated with tBTA_DM_DISC_BLE_RES */
typedef struct {
RawAddress bd_addr; /* BD address peer device. */
BD_NAME bd_name; /* Name of peer device. */
bluetooth::Uuid service; /* GATT based Services UUID found on peer device. */
} tBTA_DM_DISC_BLE_RES;
/* Union of all search callback structures */
typedef union {
tBTA_DM_INQ_RES inq_res; /* Inquiry result for a peer device. */
tBTA_DM_INQ_CMPL inq_cmpl; /* Inquiry complete. */
tBTA_DM_DISC_RES disc_res; /* Discovery result for a peer device. */
tBTA_DM_DISC_BLE_RES
disc_ble_res; /* discovery result for GATT based service */
tBTA_DM_DI_DISC_CMPL di_disc; /* DI discovery result for a peer device */
} tBTA_DM_SEARCH;
/* Search callback */
typedef void(tBTA_DM_SEARCH_CBACK)(tBTA_DM_SEARCH_EVT event,
tBTA_DM_SEARCH* p_data);
/* Execute call back */
typedef void(tBTA_DM_EXEC_CBACK)(void* p_param);
/* Encryption callback*/
typedef void(tBTA_DM_ENCRYPT_CBACK)(const RawAddress& bd_addr,
tBTA_TRANSPORT transport,
tBTA_STATUS result);
#define BTA_DM_BLE_SEC_NONE BTM_BLE_SEC_NONE
#define BTA_DM_BLE_SEC_ENCRYPT BTM_BLE_SEC_ENCRYPT
#define BTA_DM_BLE_SEC_NO_MITM BTM_BLE_SEC_ENCRYPT_NO_MITM
#define BTA_DM_BLE_SEC_MITM BTM_BLE_SEC_ENCRYPT_MITM
typedef tBTM_BLE_SEC_ACT tBTA_DM_BLE_SEC_ACT;
typedef tBTM_BLE_TX_TIME_MS tBTA_DM_BLE_TX_TIME_MS;
typedef tBTM_BLE_RX_TIME_MS tBTA_DM_BLE_RX_TIME_MS;
typedef tBTM_BLE_IDLE_TIME_MS tBTA_DM_BLE_IDLE_TIME_MS;
typedef tBTM_BLE_ENERGY_USED tBTA_DM_BLE_ENERGY_USED;
#define BTA_DM_CONTRL_UNKNOWN 0 /* Unknown state */
#define BTA_DM_CONTRL_ACTIVE 1 /* ACL link on, SCO link ongoing, sniff mode */
#define BTA_DM_CONTRL_SCAN \
2 /* Scan state - paging/inquiry/trying to \
connect*/
#define BTA_DM_CONTRL_IDLE \
3 /* Idle state - page scan, LE advt, inquiry scan \
*/
typedef uint8_t tBTA_DM_CONTRL_STATE;
typedef uint8_t tBTA_DM_BLE_ADV_STATE;
typedef uint8_t tBTA_DM_BLE_ADV_INFO_PRESENT;
typedef uint8_t tBTA_DM_BLE_RSSI_VALUE;
typedef uint16_t tBTA_DM_BLE_ADV_INFO_TIMESTAMP;
typedef void(tBTA_BLE_ENERGY_INFO_CBACK)(tBTA_DM_BLE_TX_TIME_MS tx_time,
tBTA_DM_BLE_RX_TIME_MS rx_time,
tBTA_DM_BLE_IDLE_TIME_MS idle_time,
tBTA_DM_BLE_ENERGY_USED energy_used,
tBTA_DM_CONTRL_STATE ctrl_state,
tBTA_STATUS status);
/* Maximum service name length */
#define BTA_SERVICE_NAME_LEN 35
#define BTA_SERVICE_DESP_LEN BTA_SERVICE_NAME_LEN
#define BTA_PROVIDER_NAME_LEN BTA_SERVICE_NAME_LEN
/* link policy masks */
#define BTA_DM_LP_SWITCH HCI_ENABLE_MASTER_SLAVE_SWITCH
#define BTA_DM_LP_HOLD HCI_ENABLE_HOLD_MODE
#define BTA_DM_LP_SNIFF HCI_ENABLE_SNIFF_MODE
#define BTA_DM_LP_PARK HCI_ENABLE_PARK_MODE
typedef uint16_t tBTA_DM_LP_MASK;
/* power mode actions */
#define BTA_DM_PM_NO_ACTION 0x00 /* no change to the current pm setting */
#define BTA_DM_PM_PARK 0x10 /* prefers park mode */
#define BTA_DM_PM_SNIFF 0x20 /* prefers sniff mode */
#define BTA_DM_PM_SNIFF1 0x21 /* prefers sniff1 mode */
#define BTA_DM_PM_SNIFF2 0x22 /* prefers sniff2 mode */
#define BTA_DM_PM_SNIFF3 0x23 /* prefers sniff3 mode */
#define BTA_DM_PM_SNIFF4 0x24 /* prefers sniff4 mode */
#define BTA_DM_PM_SNIFF5 0x25 /* prefers sniff5 mode */
#define BTA_DM_PM_SNIFF6 0x26 /* prefers sniff6 mode */
#define BTA_DM_PM_SNIFF7 0x27 /* prefers sniff7 mode */
#define BTA_DM_PM_SNIFF_USER0 \
0x28 /* prefers user-defined sniff0 mode (testtool only) */
#define BTA_DM_PM_SNIFF_USER1 \
0x29 /* prefers user-defined sniff1 mode (testtool only) */
#define BTA_DM_PM_ACTIVE 0x40 /* prefers active mode */
#define BTA_DM_PM_RETRY 0x80 /* retry power mode based on current settings */
#define BTA_DM_PM_SUSPEND 0x04 /* prefers suspend mode */
#define BTA_DM_PM_NO_PREF \
0x01 /* service has no prefernce on power mode setting. eg. connection to \
service got closed */
typedef uint8_t tBTA_DM_PM_ACTION;
/* index to bta_dm_ssr_spec */
#define BTA_DM_PM_SSR0 0
#define BTA_DM_PM_SSR1 \
1 /* BTA_DM_PM_SSR1 will be dedicated for \
HH SSR setting entry, no other profile can use it */
#define BTA_DM_PM_SSR2 2
#define BTA_DM_PM_SSR3 3
#define BTA_DM_PM_SSR4 4
#define BTA_DM_PM_SSR5 5
#define BTA_DM_PM_SSR6 6
#define BTA_DM_PM_NUM_EVTS 9
#ifndef BTA_DM_PM_PARK_IDX
#define BTA_DM_PM_PARK_IDX \
6 /* the actual index to bta_dm_pm_md[] for PARK mode */
#endif
#ifndef BTA_DM_PM_SNIFF_A2DP_IDX
#define BTA_DM_PM_SNIFF_A2DP_IDX BTA_DM_PM_SNIFF
#endif
#ifndef BTA_DM_PM_SNIFF_HD_IDLE_IDX
#define BTA_DM_PM_SNIFF_HD_IDLE_IDX BTA_DM_PM_SNIFF2
#endif
#ifndef BTA_DM_PM_SNIFF_SCO_OPEN_IDX
#define BTA_DM_PM_SNIFF_SCO_OPEN_IDX BTA_DM_PM_SNIFF3
#endif
#ifndef BTA_DM_PM_SNIFF_HD_ACTIVE_IDX
#define BTA_DM_PM_SNIFF_HD_ACTIVE_IDX BTA_DM_PM_SNIFF4
#endif
#ifndef BTA_DM_PM_SNIFF_HH_OPEN_IDX
#define BTA_DM_PM_SNIFF_HH_OPEN_IDX BTA_DM_PM_SNIFF2
#endif
#ifndef BTA_DM_PM_SNIFF_HH_ACTIVE_IDX
#define BTA_DM_PM_SNIFF_HH_ACTIVE_IDX BTA_DM_PM_SNIFF2
#endif
#ifndef BTA_DM_PM_SNIFF_HH_IDLE_IDX
#define BTA_DM_PM_SNIFF_HH_IDLE_IDX BTA_DM_PM_SNIFF2
#endif
#ifndef BTA_DM_PM_HH_OPEN_DELAY
#define BTA_DM_PM_HH_OPEN_DELAY 30000
#endif
#ifndef BTA_DM_PM_HH_ACTIVE_DELAY
#define BTA_DM_PM_HH_ACTIVE_DELAY 30000
#endif
#ifndef BTA_DM_PM_HH_IDLE_DELAY
#define BTA_DM_PM_HH_IDLE_DELAY 30000
#endif
/* The Sniff Parameters defined below must be ordered from highest
* latency (biggest interval) to lowest latency. If there is a conflict
* among the connected services the setting with the lowest latency will
* be selected. If a device should override a sniff parameter then it
* must insure that order is maintained.
*/
#ifndef BTA_DM_PM_SNIFF_MAX
#define BTA_DM_PM_SNIFF_MAX 800
#define BTA_DM_PM_SNIFF_MIN 400
#define BTA_DM_PM_SNIFF_ATTEMPT 4
#define BTA_DM_PM_SNIFF_TIMEOUT 1
#endif
#ifndef BTA_DM_PM_SNIFF1_MAX
#define BTA_DM_PM_SNIFF1_MAX 400
#define BTA_DM_PM_SNIFF1_MIN 200
#define BTA_DM_PM_SNIFF1_ATTEMPT 4
#define BTA_DM_PM_SNIFF1_TIMEOUT 1
#endif
#ifndef BTA_DM_PM_SNIFF2_MAX
#define BTA_DM_PM_SNIFF2_MAX 54
#define BTA_DM_PM_SNIFF2_MIN 30
#define BTA_DM_PM_SNIFF2_ATTEMPT 4
#define BTA_DM_PM_SNIFF2_TIMEOUT 1
#endif
#ifndef BTA_DM_PM_SNIFF3_MAX
#define BTA_DM_PM_SNIFF3_MAX 150
#define BTA_DM_PM_SNIFF3_MIN 50
#define BTA_DM_PM_SNIFF3_ATTEMPT 4
#define BTA_DM_PM_SNIFF3_TIMEOUT 1
#endif
#ifndef BTA_DM_PM_SNIFF4_MAX
#define BTA_DM_PM_SNIFF4_MAX 18
#define BTA_DM_PM_SNIFF4_MIN 10
#define BTA_DM_PM_SNIFF4_ATTEMPT 4
#define BTA_DM_PM_SNIFF4_TIMEOUT 1
#endif
#ifndef BTA_DM_PM_SNIFF5_MAX
#define BTA_DM_PM_SNIFF5_MAX 36
#define BTA_DM_PM_SNIFF5_MIN 30
#define BTA_DM_PM_SNIFF5_ATTEMPT 2
#define BTA_DM_PM_SNIFF5_TIMEOUT 0
#endif
#ifndef BTA_DM_PM_SNIFF6_MAX
#define BTA_DM_PM_SNIFF6_MAX 18
#define BTA_DM_PM_SNIFF6_MIN 14
#define BTA_DM_PM_SNIFF6_ATTEMPT 1
#define BTA_DM_PM_SNIFF6_TIMEOUT 0
#endif
#ifndef BTA_DM_PM_PARK_MAX
#define BTA_DM_PM_PARK_MAX 800
#define BTA_DM_PM_PARK_MIN 400
#define BTA_DM_PM_PARK_ATTEMPT 0
#define BTA_DM_PM_PARK_TIMEOUT 0
#endif
/* Switch callback events */
#define BTA_DM_SWITCH_CMPL_EVT 0 /* Completion of the Switch API */
typedef uint8_t tBTA_DM_SWITCH_EVT;
typedef void(tBTA_DM_SWITCH_CBACK)(tBTA_DM_SWITCH_EVT event,
tBTA_STATUS status);
/* Audio routing out configuration */
#define BTA_DM_ROUTE_NONE 0x00 /* No Audio output */
#define BTA_DM_ROUTE_DAC 0x01 /* routing over analog output */
#define BTA_DM_ROUTE_I2S 0x02 /* routing over digital (I2S) output */
#define BTA_DM_ROUTE_BT_MONO 0x04 /* routing over SCO */
#define BTA_DM_ROUTE_BT_STEREO 0x08 /* routing over BT Stereo */
#define BTA_DM_ROUTE_HOST 0x10 /* routing over Host */
#define BTA_DM_ROUTE_FMTX 0x20 /* routing over FMTX */
#define BTA_DM_ROUTE_FMRX 0x40 /* routing over FMRX */
#define BTA_DM_ROUTE_BTSNK 0x80 /* routing over BT SNK */
typedef uint8_t tBTA_DM_ROUTE_PATH;
/* Device Identification (DI) data structure
*/
/* Used to set the DI record */
typedef tSDP_DI_RECORD tBTA_DI_RECORD;
/* Used to get the DI record */
typedef tSDP_DI_GET_RECORD tBTA_DI_GET_RECORD;
/* SDP discovery database */
typedef tSDP_DISCOVERY_DB tBTA_DISCOVERY_DB;
#ifndef BTA_DI_NUM_MAX
#define BTA_DI_NUM_MAX 3
#endif
/* Device features mask definitions */
#define BTA_FEATURE_BYTES_PER_PAGE BTM_FEATURE_BYTES_PER_PAGE
#define BTA_EXT_FEATURES_PAGE_MAX BTM_EXT_FEATURES_PAGE_MAX
/* ACL type
*/
#define BTA_DM_LINK_TYPE_BR_EDR 0x01
#define BTA_DM_LINK_TYPE_LE 0x02
#define BTA_DM_LINK_TYPE_ALL 0xFF
typedef uint8_t tBTA_DM_LINK_TYPE;
#define IMMEDIATE_DELY_MODE 0x00
#define ONFOUND_DELY_MODE 0x01
#define BATCH_DELY_MODE 0x02
#define ALLOW_ALL_FILTER 0x00
#define LOWEST_RSSI_VALUE 129
/*****************************************************************************
* External Function Declarations
****************************************************************************/
/*******************************************************************************
*
* Function BTA_EnableBluetooth
*
* Description This function initializes BTA and prepares BTA and the
* Bluetooth protocol stack for use. This function is
* typically called at startup or when Bluetooth services
* are required by the phone. This function must be called
* before calling any other API function.
*
*
* Returns BTA_SUCCESS if successful.
* BTA_FAIL if internal failure.
*
******************************************************************************/
extern tBTA_STATUS BTA_EnableBluetooth(tBTA_DM_SEC_CBACK* p_cback);
/*******************************************************************************
*
* Function BTA_DisableBluetooth
*
* Description This function disables BTA and the Bluetooth protocol
* stack. It is called when BTA is no longer being used
* by any application in the system.
*
*
* Returns void
*
******************************************************************************/
extern tBTA_STATUS BTA_DisableBluetooth(void);
/*******************************************************************************
*
* Function BTA_EnableTestMode
*
* Description Enables bluetooth device under test mode
*
*
* Returns tBTA_STATUS
*
******************************************************************************/
extern void BTA_EnableTestMode(void);
/*******************************************************************************
*
* Function BTA_DisableTestMode
*
* Description Disable bluetooth device under test mode
*
*
* Returns None
*
******************************************************************************/
extern void BTA_DisableTestMode(void);
/*******************************************************************************
*
* Function BTA_DmSetDeviceName
*
* Description This function sets the Bluetooth name of the local device.
*
*
* Returns void
*
******************************************************************************/
extern void BTA_DmSetDeviceName(char* p_name);
/*******************************************************************************
*
* Function BTA_DmSetVisibility
*
* Description This function sets the Bluetooth connectable,discoverable,
* pairable and conn paired only modesmodes of the local
* device.
* This controls whether other Bluetooth devices can find and
* connect to the local device.
*
*
* Returns void
*
******************************************************************************/
extern void BTA_DmSetVisibility(tBTA_DM_DISC disc_mode, tBTA_DM_CONN conn_mode,
uint8_t pairable_mode, uint8_t conn_filter);
/*******************************************************************************
*
* Function BTA_DmSearch
*
* Description This function searches for peer Bluetooth devices. It
* first performs an inquiry; for each device found from the
* inquiry it gets the remote name of the device. If
* parameter services is nonzero, service discovery will be
* performed on each device for the services specified.
*
*
* Returns void
*
******************************************************************************/
extern void BTA_DmSearch(tBTA_DM_INQ* p_dm_inq, tBTA_SERVICE_MASK services,
tBTA_DM_SEARCH_CBACK* p_cback);
/*******************************************************************************
*
* Function BTA_DmSearchCancel
*
* Description This function cancels a search that has been initiated
* by calling BTA_DmSearch().
*
*
* Returns void
*
******************************************************************************/
extern void BTA_DmSearchCancel(void);
/*******************************************************************************
*
* Function BTA_DmDiscover
*
* Description This function performs service discovery for the services
* of a particular peer device.
*
*
* Returns void
*
******************************************************************************/
extern void BTA_DmDiscover(const RawAddress& bd_addr,
tBTA_SERVICE_MASK services,
tBTA_DM_SEARCH_CBACK* p_cback, bool sdp_search);
/*******************************************************************************
*
* Function BTA_DmDiscoverUUID
*
* Description This function performs service discovery for the services
* of a particular peer device.
*
*
* Returns void
*
******************************************************************************/
extern void BTA_DmDiscoverUUID(const RawAddress& bd_addr,
const bluetooth::Uuid& uuid,
tBTA_DM_SEARCH_CBACK* p_cback, bool sdp_search);
/*******************************************************************************
*
* Function BTA_DmGetCachedRemoteName
*
* Description Retieve cached remote name if available
*
* Returns BTA_SUCCESS if cached name was retrieved
* BTA_FAILURE if cached name is not available
*
******************************************************************************/
tBTA_STATUS BTA_DmGetCachedRemoteName(const RawAddress& remote_device,
uint8_t** pp_cached_name);
/*******************************************************************************
*
* Function BTA_DmBond
*
* Description This function initiates a bonding procedure with a peer
* device by designated transport. The bonding procedure
* enables authentication and optionally encryption on the
* Bluetooth link.
*
*
* Returns void
*
******************************************************************************/
extern void BTA_DmBond(const RawAddress& bd_addr, tBLE_ADDR_TYPE addr_type,
tBTA_TRANSPORT transport);
/*******************************************************************************
*
* Function BTA_DmBondCancel
*
* Description This function cancels a bonding procedure with a peer
* device.
*
*
* Returns void
*
******************************************************************************/
extern void BTA_DmBondCancel(const RawAddress& bd_addr);
/*******************************************************************************
*
* Function BTA_DmPinReply
*
* Description This function provides a PIN when one is requested by DM
* during a bonding procedure. The application should call
* this function after the security callback is called with
* a BTA_DM_PIN_REQ_EVT.
*
*
* Returns void
*
******************************************************************************/
extern void BTA_DmPinReply(const RawAddress& bd_addr, bool accept,
uint8_t pin_len, uint8_t* p_pin);
/*******************************************************************************
*
* Function BTA_DmLocalOob
*
* Description This function retrieves the OOB data from local controller.
* The result is reported by bta_dm_co_loc_oob().
*
* Returns void
*
******************************************************************************/
extern void BTA_DmLocalOob(void);
/*******************************************************************************
*
* Function BTA_DmConfirm
*
* Description This function accepts or rejects the numerical value of the
* Simple Pairing process on BTA_DM_SP_CFM_REQ_EVT
*
* Returns void
*
******************************************************************************/
extern void BTA_DmConfirm(const RawAddress& bd_addr, bool accept);
/*******************************************************************************
*
* Function BTA_DmAddDevice
*
* Description This function adds a device to the security database list
* of peer devices. This function would typically be called
* at system startup to initialize the security database with
* known peer devices. This is a direct execution function
* that may lock task scheduling on some platforms.
*
* Returns void
*
******************************************************************************/
extern void BTA_DmAddDevice(const RawAddress& bd_addr, DEV_CLASS dev_class,
const LinkKey& link_key,
tBTA_SERVICE_MASK trusted_mask, bool is_trusted,
uint8_t key_type, tBTA_IO_CAP io_cap,
uint8_t pin_length);
/*******************************************************************************
*
* Function BTA_DmRemoveDevice
*
* Description This function removes a device from the security database.
* This is a direct execution function that may lock task
* scheduling on some platforms.
*
*
* Returns BTA_SUCCESS if successful.
* BTA_FAIL if operation failed.
*
******************************************************************************/
extern tBTA_STATUS BTA_DmRemoveDevice(const RawAddress& bd_addr);
/*******************************************************************************
*
* Function BTA_GetEirService
*
* Description This function is called to get BTA service mask from EIR.
*
* Parameters p_eir - pointer of EIR significant part
* eir_len - EIR length
* p_services - return the BTA service mask
*
* Returns None
*
******************************************************************************/
extern void BTA_GetEirService(uint8_t* p_eir, size_t eir_len,
tBTA_SERVICE_MASK* p_services);
/*******************************************************************************
*
* Function BTA_DmGetConnectionState
*
* Description Returns whether the remote device is currently connected.
*
* Returns 0 if the device is NOT connected.
*
******************************************************************************/
extern uint16_t BTA_DmGetConnectionState(const RawAddress& bd_addr);
/*******************************************************************************
*
* Function BTA_DmSetLocalDiRecord
*
* Description This function adds a DI record to the local SDP database.
*
* Returns BTA_SUCCESS if record set sucessfully, otherwise error code.
*
******************************************************************************/
extern tBTA_STATUS BTA_DmSetLocalDiRecord(tBTA_DI_RECORD* p_device_info,
uint32_t* p_handle);
/*******************************************************************************
*
*
* Function BTA_DmCloseACL
*
* Description This function force to close an ACL connection and remove
the
* device from the security database list of known devices.
*
* Parameters: bd_addr - Address of the peer device
* remove_dev - remove device or not after link down
* transport - which transport to close
*
* Returns void.
*
******************************************************************************/
extern void BTA_DmCloseACL(const RawAddress& bd_addr, bool remove_dev,
tBTA_TRANSPORT transport);
/* BLE related API functions */
/*******************************************************************************
*
* Function BTA_DmBleSecurityGrant
*
* Description Grant security request access.
*
* Parameters: bd_addr - BD address of the peer
* res - security grant status.
*
* Returns void
*
******************************************************************************/
extern void BTA_DmBleSecurityGrant(const RawAddress& bd_addr,
tBTA_DM_BLE_SEC_GRANT res);
/*******************************************************************************
*
* Function BTA_DmBlePasskeyReply
*
* Description Send BLE SMP passkey reply.
*
* Parameters: bd_addr - BD address of the peer
* accept - passkey entry sucessful or declined.
* passkey - passkey value, must be a 6 digit number,
* can be lead by 0.
*
* Returns void
*
******************************************************************************/
extern void BTA_DmBlePasskeyReply(const RawAddress& bd_addr, bool accept,
uint32_t passkey);
/*******************************************************************************
*
* Function BTA_DmBleConfirmReply
*
* Description Send BLE SMP SC user confirmation reply.
*
* Parameters: bd_addr - BD address of the peer
* accept - numbers to compare are the same or
* different.
*
* Returns void
*
******************************************************************************/
extern void BTA_DmBleConfirmReply(const RawAddress& bd_addr, bool accept);
/*******************************************************************************
*
* Function BTA_DmAddBleDevice
*
* Description Add a BLE device. This function will be normally called
* during host startup to restore all required information
* for a LE device stored in the NVRAM.
*
* Parameters: bd_addr - BD address of the peer
* dev_type - Remote device's device type.
* addr_type - LE device address type.
*
* Returns void
*
******************************************************************************/
extern void BTA_DmAddBleDevice(const RawAddress& bd_addr,
tBLE_ADDR_TYPE addr_type,
tBT_DEVICE_TYPE dev_type);
/*******************************************************************************
*
* Function BTA_DmAddBleKey
*
* Description Add/modify LE device information. This function will be
* normally called during host startup to restore all required
* information stored in the NVRAM.
*
* Parameters: bd_addr - BD address of the peer
* p_le_key - LE key values.
* key_type - LE SMP key type.
*
* Returns void
*
******************************************************************************/
extern void BTA_DmAddBleKey(const RawAddress& bd_addr,
tBTA_LE_KEY_VALUE* p_le_key,
tBTA_LE_KEY_TYPE key_type);
/*******************************************************************************
*
* Function BTA_DmSetBlePrefConnParams
*
* Description This function is called to set the preferred connection
* parameters when default connection parameter is not desired.
*
* Parameters: bd_addr - BD address of the peripheral
* min_conn_int - minimum preferred connection interval
* max_conn_int - maximum preferred connection interval
* slave_latency - preferred slave latency
* supervision_tout - preferred supervision timeout
*
*
* Returns void
*
******************************************************************************/
extern void BTA_DmSetBlePrefConnParams(const RawAddress& bd_addr,
uint16_t min_conn_int,
uint16_t max_conn_int,
uint16_t slave_latency,
uint16_t supervision_tout);
/*******************************************************************************
*
* Function BTA_DmSetBleConnScanParams
*
* Description This function is called to set scan parameters used in
* BLE connection request
*
* Parameters: scan_interval - scan interval
* scan_window - scan window
*
* Returns void
*
******************************************************************************/
extern void BTA_DmSetBleConnScanParams(uint32_t scan_interval,
uint32_t scan_window);
/*******************************************************************************
*
* Function BTA_DmSearchExt
*
* Description This function searches for peer Bluetooth devices. It
* performs an inquiry and gets the remote name for devices.
* Service discovery is done if services is non zero
*
* Parameters p_dm_inq: inquiry conditions
* services: if service is not empty, service discovery will be
* done.
* for all GATT based service condition, put
* num_uuid, and p_uuid is the pointer to the list of
* UUID values.
* p_cback: callback functino when search is completed.
*
*
*
* Returns void
*
******************************************************************************/
extern void BTA_DmSearchExt(tBTA_DM_INQ* p_dm_inq,
tBTA_SERVICE_MASK_EXT* p_services,
tBTA_DM_SEARCH_CBACK* p_cback);
/*******************************************************************************
*
* Function BTA_DmDiscoverExt
*
* Description This function does service discovery for services of a
* peer device. When services.num_uuid is 0, it indicates all
* GATT based services are to be searched; other wise a list of
* UUID of interested services should be provided through
* services.p_uuid.
*
*
*
* Returns void
*
******************************************************************************/
extern void BTA_DmDiscoverExt(const RawAddress& bd_addr,
tBTA_SERVICE_MASK_EXT* p_services,
tBTA_DM_SEARCH_CBACK* p_cback, bool sdp_search);
/*******************************************************************************
*
* Function BTA_DmDiscoverByTransport
*
* Description This function does service discovery on particular transport
* for services of a
* peer device. When services.num_uuid is 0, it indicates all
* GATT based services are to be searched; other wise a list of
* UUID of interested services should be provided through
* p_services->p_uuid.
*
*
*
* Returns void
*
******************************************************************************/
extern void BTA_DmDiscoverByTransport(const RawAddress& bd_addr,
tBTA_SERVICE_MASK_EXT* p_services,
tBTA_DM_SEARCH_CBACK* p_cback,
bool sdp_search,
tBTA_TRANSPORT transport);
/*******************************************************************************
*
* Function BTA_DmSetEncryption
*
* Description This function is called to ensure that connection is
* encrypted. Should be called only on an open connection.
* Typically only needed for connections that first want to
* bring up unencrypted links, then later encrypt them.
*
* Parameters: bd_addr - Address of the peer device
* transport - transport of the link to be encruypted
* p_callback - Pointer to callback function to indicat the
* link encryption status
* sec_act - This is the security action to indicate
* what kind of BLE security level is required
* for the BLE link if BLE is supported
* Note: This parameter is ignored for
* BR/EDR or if BLE is not supported.
*
* Returns void
*
*
******************************************************************************/
extern void BTA_DmSetEncryption(const RawAddress& bd_addr,
tBTA_TRANSPORT transport,
tBTA_DM_ENCRYPT_CBACK* p_callback,
tBTA_DM_BLE_SEC_ACT sec_act);
/*******************************************************************************
*
* Function BTA_DmBleObserve
*
* Description This procedure keep the device listening for advertising
* events from a broadcast device.
*
* Parameters start: start or stop observe.
* duration : Duration of the scan. Continuous scan if 0 is
* passed
* p_results_cb: Callback to be called with scan results
*
* Returns void
*
******************************************************************************/
extern void BTA_DmBleObserve(bool start, uint8_t duration,
tBTA_DM_SEARCH_CBACK* p_results_cb);
/*******************************************************************************
*
* Function BTA_DmBleConfigLocalPrivacy
*
* Description Enable/disable privacy on the local device
*
* Parameters: privacy_enable - enable/disabe privacy on remote device.
*
* Returns void
*
******************************************************************************/
extern void BTA_DmBleConfigLocalPrivacy(bool privacy_enable);
/*******************************************************************************
*
* Function BTA_DmBleEnableRemotePrivacy
*
* Description Enable/disable privacy on a remote device
*
* Parameters: bd_addr - BD address of the peer
* privacy_enable - enable/disabe privacy on remote device.
*
* Returns void
*
******************************************************************************/
extern void BTA_DmBleEnableRemotePrivacy(const RawAddress& bd_addr,
bool privacy_enable);
/*******************************************************************************
*
* Function BTA_DmBleUpdateConnectionParams
*
* Description Update connection parameters, can only be used when
* connection is up.
*
* Parameters: bd_addr - BD address of the peer
* min_int - minimum connection interval, [0x0004 ~ 0x4000]
* max_int - maximum connection interval, [0x0004 ~ 0x4000]
* latency - slave latency [0 ~ 500]
* timeout - supervision timeout [0x000a ~ 0xc80]
*
* Returns void
*
******************************************************************************/
extern void BTA_DmBleUpdateConnectionParams(const RawAddress& bd_addr,
uint16_t min_int, uint16_t max_int,
uint16_t latency, uint16_t timeout,
uint16_t min_ce_len,
uint16_t max_ce_len);
/*******************************************************************************
*
* Function BTA_DmBleSetDataLength
*
* Description This function is to set maximum LE data packet size
*
* Returns void
*
******************************************************************************/
extern void BTA_DmBleSetDataLength(const RawAddress& remote_device,
uint16_t tx_data_length);
/*******************************************************************************
*
* Function BTA_DmBleGetEnergyInfo
*
* Description This function is called to obtain the energy info
*
* Parameters p_cmpl_cback - Command complete callback
*
* Returns void
*
******************************************************************************/
extern void BTA_DmBleGetEnergyInfo(tBTA_BLE_ENERGY_INFO_CBACK* p_cmpl_cback);
/*******************************************************************************
*
* Function BTA_BrcmInit
*
* Description This function initializes Broadcom specific VS handler in
* BTA
*
* Returns void
*
******************************************************************************/
extern void BTA_VendorInit(void);
/*******************************************************************************
*
* Function BTA_BrcmCleanup
*
* Description This function frees up Broadcom specific VS specific dynamic
* memory
*
* Returns void
*
******************************************************************************/
extern void BTA_VendorCleanup(void);
#endif /* BTA_API_H */