| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains SDP utility functions |
| * |
| ******************************************************************************/ |
| |
| #include <stdlib.h> |
| #include <string.h> |
| #include <netinet/in.h> |
| #include <stdio.h> |
| |
| #include "bt_common.h" |
| #include "bt_types.h" |
| |
| #include "l2cdefs.h" |
| #include "hcidefs.h" |
| #include "hcimsgs.h" |
| |
| #include "sdp_api.h" |
| #include "sdpint.h" |
| |
| #include "btu.h" |
| |
| |
| static const UINT8 sdp_base_uuid[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, |
| 0x80, 0x00, 0x00, 0x80, 0x5F, 0x9B, 0x34, 0xFB}; |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_find_ccb_by_cid |
| ** |
| ** Description This function searches the CCB table for an entry with the |
| ** passed CID. |
| ** |
| ** Returns the CCB address, or NULL if not found. |
| ** |
| *******************************************************************************/ |
| tCONN_CB *sdpu_find_ccb_by_cid (UINT16 cid) |
| { |
| UINT16 xx; |
| tCONN_CB *p_ccb; |
| |
| /* Look through each connection control block */ |
| for (xx = 0, p_ccb = sdp_cb.ccb; xx < SDP_MAX_CONNECTIONS; xx++, p_ccb++) |
| { |
| if ((p_ccb->con_state != SDP_STATE_IDLE) && (p_ccb->connection_id == cid)) |
| return (p_ccb); |
| } |
| |
| /* If here, not found */ |
| return (NULL); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_find_ccb_by_db |
| ** |
| ** Description This function searches the CCB table for an entry with the |
| ** passed discovery db. |
| ** |
| ** Returns the CCB address, or NULL if not found. |
| ** |
| *******************************************************************************/ |
| tCONN_CB *sdpu_find_ccb_by_db (tSDP_DISCOVERY_DB *p_db) |
| { |
| #if SDP_CLIENT_ENABLED == TRUE |
| UINT16 xx; |
| tCONN_CB *p_ccb; |
| |
| if (p_db) |
| { |
| /* Look through each connection control block */ |
| for (xx = 0, p_ccb = sdp_cb.ccb; xx < SDP_MAX_CONNECTIONS; xx++, p_ccb++) |
| { |
| if ((p_ccb->con_state != SDP_STATE_IDLE) && (p_ccb->p_db == p_db)) |
| return (p_ccb); |
| } |
| } |
| #endif |
| /* If here, not found */ |
| return (NULL); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_allocate_ccb |
| ** |
| ** Description This function allocates a new CCB. |
| ** |
| ** Returns CCB address, or NULL if none available. |
| ** |
| *******************************************************************************/ |
| tCONN_CB *sdpu_allocate_ccb (void) |
| { |
| UINT16 xx; |
| tCONN_CB *p_ccb; |
| |
| /* Look through each connection control block for a free one */ |
| for (xx = 0, p_ccb = sdp_cb.ccb; xx < SDP_MAX_CONNECTIONS; xx++, p_ccb++) |
| { |
| if (p_ccb->con_state == SDP_STATE_IDLE) |
| { |
| memset(p_ccb, 0, sizeof(tCONN_CB)); |
| p_ccb->sdp_conn_timer = alarm_new("sdp.sdp_conn_timer"); |
| return (p_ccb); |
| } |
| } |
| |
| /* If here, no free CCB found */ |
| return (NULL); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_release_ccb |
| ** |
| ** Description This function releases a CCB. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void sdpu_release_ccb (tCONN_CB *p_ccb) |
| { |
| /* Ensure timer is stopped */ |
| alarm_free(p_ccb->sdp_conn_timer); |
| p_ccb->sdp_conn_timer = NULL; |
| |
| /* Drop any response pointer we may be holding */ |
| p_ccb->con_state = SDP_STATE_IDLE; |
| #if SDP_CLIENT_ENABLED == TRUE |
| p_ccb->is_attr_search = FALSE; |
| #endif |
| |
| /* Free the response buffer */ |
| if (p_ccb->rsp_list) |
| SDP_TRACE_DEBUG("releasing SDP rsp_list"); |
| osi_free_and_reset((void **)&p_ccb->rsp_list); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_build_attrib_seq |
| ** |
| ** Description This function builds an attribute sequence from the list of |
| ** passed attributes. It is also passed the address of the output |
| ** buffer. |
| ** |
| ** Returns Pointer to next byte in the output buffer. |
| ** |
| *******************************************************************************/ |
| UINT8 *sdpu_build_attrib_seq (UINT8 *p_out, UINT16 *p_attr, UINT16 num_attrs) |
| { |
| UINT16 xx; |
| |
| /* First thing is the data element header. See if the length fits 1 byte */ |
| /* If no attributes, assume a 4-byte wildcard */ |
| if (!p_attr) |
| xx = 5; |
| else |
| xx = num_attrs * 3; |
| |
| if (xx > 255) |
| { |
| UINT8_TO_BE_STREAM (p_out, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_WORD); |
| UINT16_TO_BE_STREAM (p_out, xx); |
| } |
| else |
| { |
| UINT8_TO_BE_STREAM (p_out, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE); |
| UINT8_TO_BE_STREAM (p_out, xx); |
| } |
| |
| /* If there are no attributes specified, assume caller wants wildcard */ |
| if (!p_attr) |
| { |
| UINT8_TO_BE_STREAM (p_out, (UINT_DESC_TYPE << 3) | SIZE_FOUR_BYTES); |
| UINT16_TO_BE_STREAM (p_out, 0); |
| UINT16_TO_BE_STREAM (p_out, 0xFFFF); |
| } |
| else |
| { |
| /* Loop through and put in all the attributes(s) */ |
| for (xx = 0; xx < num_attrs; xx++, p_attr++) |
| { |
| UINT8_TO_BE_STREAM (p_out, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES); |
| UINT16_TO_BE_STREAM (p_out, *p_attr); |
| } |
| } |
| |
| return (p_out); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_build_attrib_entry |
| ** |
| ** Description This function builds an attribute entry from the passed |
| ** attribute record. It is also passed the address of the output |
| ** buffer. |
| ** |
| ** Returns Pointer to next byte in the output buffer. |
| ** |
| *******************************************************************************/ |
| UINT8 *sdpu_build_attrib_entry (UINT8 *p_out, tSDP_ATTRIBUTE *p_attr) |
| { |
| /* First, store the attribute ID. Goes as a UINT */ |
| UINT8_TO_BE_STREAM (p_out, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES); |
| UINT16_TO_BE_STREAM (p_out, p_attr->id); |
| |
| /* the attribute is in the db record. |
| * assuming the attribute len is less than SDP_MAX_ATTR_LEN */ |
| switch(p_attr->type) |
| { |
| case TEXT_STR_DESC_TYPE: /* 4 */ |
| case DATA_ELE_SEQ_DESC_TYPE:/* 6 */ |
| case DATA_ELE_ALT_DESC_TYPE:/* 7 */ |
| case URL_DESC_TYPE: /* 8 */ |
| #if (SDP_MAX_ATTR_LEN > 0xFFFF) |
| if(p_attr->len > 0xFFFF) |
| { |
| UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_IN_NEXT_LONG); |
| UINT32_TO_BE_STREAM (p_out, p_attr->len); |
| } |
| else |
| |
| #endif /* 0xFFFF - 0xFF */ |
| #if (SDP_MAX_ATTR_LEN > 0xFF) |
| if(p_attr->len > 0xFF) |
| { |
| UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_IN_NEXT_WORD); |
| UINT16_TO_BE_STREAM (p_out, p_attr->len); |
| } |
| else |
| |
| #endif /* 0xFF and less*/ |
| { |
| UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_IN_NEXT_BYTE); |
| UINT8_TO_BE_STREAM (p_out, p_attr->len); |
| } |
| |
| if (p_attr->value_ptr != NULL) { |
| ARRAY_TO_BE_STREAM (p_out, p_attr->value_ptr, (int)p_attr->len); |
| } |
| |
| return (p_out); |
| } |
| |
| /* Now, store the attribute value */ |
| switch (p_attr->len) |
| { |
| case 1: |
| UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_ONE_BYTE); |
| break; |
| case 2: |
| UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_TWO_BYTES); |
| break; |
| case 4: |
| UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_FOUR_BYTES); |
| break; |
| case 8: |
| UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_EIGHT_BYTES); |
| break; |
| case 16: |
| UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_SIXTEEN_BYTES); |
| break; |
| default: |
| UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_IN_NEXT_BYTE); |
| UINT8_TO_BE_STREAM (p_out, p_attr->len); |
| break; |
| } |
| |
| if (p_attr->value_ptr != NULL) { |
| ARRAY_TO_BE_STREAM (p_out, p_attr->value_ptr, (int)p_attr->len); |
| } |
| |
| return (p_out); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_build_n_send_error |
| ** |
| ** Description This function builds and sends an error packet. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void sdpu_build_n_send_error (tCONN_CB *p_ccb, UINT16 trans_num, UINT16 error_code, char *p_error_text) |
| { |
| UINT8 *p_rsp, *p_rsp_start, *p_rsp_param_len; |
| UINT16 rsp_param_len; |
| BT_HDR *p_buf = (BT_HDR *)osi_malloc(SDP_DATA_BUF_SIZE); |
| |
| |
| SDP_TRACE_WARNING ("SDP - sdpu_build_n_send_error code: 0x%x CID: 0x%x", |
| error_code, p_ccb->connection_id); |
| |
| /* Send the packet to L2CAP */ |
| p_buf->offset = L2CAP_MIN_OFFSET; |
| p_rsp = p_rsp_start = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET; |
| |
| UINT8_TO_BE_STREAM(p_rsp, SDP_PDU_ERROR_RESPONSE); |
| UINT16_TO_BE_STREAM(p_rsp, trans_num); |
| |
| /* Skip the parameter length, we need to add it at the end */ |
| p_rsp_param_len = p_rsp; |
| p_rsp += 2; |
| |
| UINT16_TO_BE_STREAM (p_rsp, error_code); |
| |
| /* Unplugfest example traces do not have any error text */ |
| if (p_error_text) |
| ARRAY_TO_BE_STREAM(p_rsp, p_error_text, (int)strlen(p_error_text)); |
| |
| /* Go back and put the parameter length into the buffer */ |
| rsp_param_len = p_rsp - p_rsp_param_len - 2; |
| UINT16_TO_BE_STREAM(p_rsp_param_len, rsp_param_len); |
| |
| /* Set the length of the SDP data in the buffer */ |
| p_buf->len = p_rsp - p_rsp_start; |
| |
| /* Send the buffer through L2CAP */ |
| L2CA_DataWrite(p_ccb->connection_id, p_buf); |
| } |
| |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_extract_uid_seq |
| ** |
| ** Description This function extracts a UUID sequence from the passed input |
| ** buffer, and puts it into the passed output list. |
| ** |
| ** Returns Pointer to next byte in the input buffer after the sequence. |
| ** |
| *******************************************************************************/ |
| UINT8 *sdpu_extract_uid_seq (UINT8 *p, UINT16 param_len, tSDP_UUID_SEQ *p_seq) |
| { |
| UINT8 *p_seq_end; |
| UINT8 descr, type, size; |
| UINT32 seq_len, uuid_len; |
| |
| /* Assume none found */ |
| p_seq->num_uids = 0; |
| |
| /* A UID sequence is composed of a bunch of UIDs. */ |
| |
| BE_STREAM_TO_UINT8 (descr, p); |
| type = descr >> 3; |
| size = descr & 7; |
| |
| if (type != DATA_ELE_SEQ_DESC_TYPE) |
| return (NULL); |
| |
| switch (size) |
| { |
| case SIZE_TWO_BYTES: |
| seq_len = 2; |
| break; |
| case SIZE_FOUR_BYTES: |
| seq_len = 4; |
| break; |
| case SIZE_SIXTEEN_BYTES: |
| seq_len = 16; |
| break; |
| case SIZE_IN_NEXT_BYTE: |
| BE_STREAM_TO_UINT8 (seq_len, p); |
| break; |
| case SIZE_IN_NEXT_WORD: |
| BE_STREAM_TO_UINT16 (seq_len, p); |
| break; |
| case SIZE_IN_NEXT_LONG: |
| BE_STREAM_TO_UINT32 (seq_len, p); |
| break; |
| default: |
| return (NULL); |
| } |
| |
| if (seq_len >= param_len) |
| return (NULL); |
| |
| p_seq_end = p + seq_len; |
| |
| /* Loop through, extracting the UIDs */ |
| for ( ; p < p_seq_end ; ) |
| { |
| BE_STREAM_TO_UINT8 (descr, p); |
| type = descr >> 3; |
| size = descr & 7; |
| |
| if (type != UUID_DESC_TYPE) |
| return (NULL); |
| |
| switch (size) |
| { |
| case SIZE_TWO_BYTES: |
| uuid_len = 2; |
| break; |
| case SIZE_FOUR_BYTES: |
| uuid_len = 4; |
| break; |
| case SIZE_SIXTEEN_BYTES: |
| uuid_len = 16; |
| break; |
| case SIZE_IN_NEXT_BYTE: |
| BE_STREAM_TO_UINT8 (uuid_len, p); |
| break; |
| case SIZE_IN_NEXT_WORD: |
| BE_STREAM_TO_UINT16 (uuid_len, p); |
| break; |
| case SIZE_IN_NEXT_LONG: |
| BE_STREAM_TO_UINT32 (uuid_len, p); |
| break; |
| default: |
| return (NULL); |
| } |
| |
| /* If UUID length is valid, copy it across */ |
| if ((uuid_len == 2) || (uuid_len == 4) || (uuid_len == 16)) |
| { |
| p_seq->uuid_entry[p_seq->num_uids].len = (UINT16) uuid_len; |
| BE_STREAM_TO_ARRAY (p, p_seq->uuid_entry[p_seq->num_uids].value, (int)uuid_len); |
| p_seq->num_uids++; |
| } |
| else |
| return (NULL); |
| |
| /* We can only do so many */ |
| if (p_seq->num_uids >= MAX_UUIDS_PER_SEQ) |
| return (NULL); |
| } |
| |
| if (p != p_seq_end) |
| return (NULL); |
| |
| return (p); |
| } |
| |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_extract_attr_seq |
| ** |
| ** Description This function extracts an attribute sequence from the passed |
| ** input buffer, and puts it into the passed output list. |
| ** |
| ** Returns Pointer to next byte in the input buffer after the sequence. |
| ** |
| *******************************************************************************/ |
| UINT8 *sdpu_extract_attr_seq (UINT8 *p, UINT16 param_len, tSDP_ATTR_SEQ *p_seq) |
| { |
| UINT8 *p_end_list; |
| UINT8 descr, type, size; |
| UINT32 list_len, attr_len; |
| |
| /* Assume none found */ |
| p_seq->num_attr = 0; |
| |
| /* Get attribute sequence info */ |
| BE_STREAM_TO_UINT8 (descr, p); |
| type = descr >> 3; |
| size = descr & 7; |
| |
| if (type != DATA_ELE_SEQ_DESC_TYPE) |
| return (p); |
| |
| switch (size) |
| { |
| case SIZE_IN_NEXT_BYTE: |
| BE_STREAM_TO_UINT8 (list_len, p); |
| break; |
| |
| case SIZE_IN_NEXT_WORD: |
| BE_STREAM_TO_UINT16 (list_len, p); |
| break; |
| |
| case SIZE_IN_NEXT_LONG: |
| BE_STREAM_TO_UINT32 (list_len, p); |
| break; |
| |
| default: |
| return (p); |
| } |
| |
| if (list_len > param_len) |
| return (p); |
| |
| p_end_list = p + list_len; |
| |
| /* Loop through, extracting the attribute IDs */ |
| for ( ; p < p_end_list ; ) |
| { |
| BE_STREAM_TO_UINT8 (descr, p); |
| type = descr >> 3; |
| size = descr & 7; |
| |
| if (type != UINT_DESC_TYPE) |
| return (p); |
| |
| switch (size) |
| { |
| case SIZE_TWO_BYTES: |
| attr_len = 2; |
| break; |
| case SIZE_FOUR_BYTES: |
| attr_len = 4; |
| break; |
| case SIZE_IN_NEXT_BYTE: |
| BE_STREAM_TO_UINT8 (attr_len, p); |
| break; |
| case SIZE_IN_NEXT_WORD: |
| BE_STREAM_TO_UINT16 (attr_len, p); |
| break; |
| case SIZE_IN_NEXT_LONG: |
| BE_STREAM_TO_UINT32 (attr_len, p); |
| break; |
| default: |
| return (NULL); |
| break; |
| } |
| |
| /* Attribute length must be 2-bytes or 4-bytes for a paired entry. */ |
| if (attr_len == 2) |
| { |
| BE_STREAM_TO_UINT16 (p_seq->attr_entry[p_seq->num_attr].start, p); |
| p_seq->attr_entry[p_seq->num_attr].end = p_seq->attr_entry[p_seq->num_attr].start; |
| } |
| else if (attr_len == 4) |
| { |
| BE_STREAM_TO_UINT16 (p_seq->attr_entry[p_seq->num_attr].start, p); |
| BE_STREAM_TO_UINT16 (p_seq->attr_entry[p_seq->num_attr].end, p); |
| } |
| else |
| return (NULL); |
| |
| /* We can only do so many */ |
| if (++p_seq->num_attr >= MAX_ATTR_PER_SEQ) |
| return (NULL); |
| } |
| |
| return (p); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_get_len_from_type |
| ** |
| ** Description This function gets the length |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| UINT8 *sdpu_get_len_from_type (UINT8 *p, UINT8 type, UINT32 *p_len) |
| { |
| UINT8 u8; |
| UINT16 u16; |
| UINT32 u32; |
| |
| switch (type & 7) |
| { |
| case SIZE_ONE_BYTE: |
| *p_len = 1; |
| break; |
| case SIZE_TWO_BYTES: |
| *p_len = 2; |
| break; |
| case SIZE_FOUR_BYTES: |
| *p_len = 4; |
| break; |
| case SIZE_EIGHT_BYTES: |
| *p_len = 8; |
| break; |
| case SIZE_SIXTEEN_BYTES: |
| *p_len = 16; |
| break; |
| case SIZE_IN_NEXT_BYTE: |
| BE_STREAM_TO_UINT8 (u8, p); |
| *p_len = u8; |
| break; |
| case SIZE_IN_NEXT_WORD: |
| BE_STREAM_TO_UINT16 (u16, p); |
| *p_len = u16; |
| break; |
| case SIZE_IN_NEXT_LONG: |
| BE_STREAM_TO_UINT32 (u32, p); |
| *p_len = (UINT16) u32; |
| break; |
| } |
| |
| return (p); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_is_base_uuid |
| ** |
| ** Description This function checks a 128-bit UUID with the base to see if |
| ** it matches. Only the last 12 bytes are compared. |
| ** |
| ** Returns TRUE if matched, else FALSE |
| ** |
| *******************************************************************************/ |
| BOOLEAN sdpu_is_base_uuid (UINT8 *p_uuid) |
| { |
| UINT16 xx; |
| |
| for (xx = 4; xx < MAX_UUID_SIZE; xx++) |
| if (p_uuid[xx] != sdp_base_uuid[xx]) |
| return (FALSE); |
| |
| /* If here, matched */ |
| return (TRUE); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_compare_uuid_arrays |
| ** |
| ** Description This function compares 2 BE UUIDs. If needed, they are expanded |
| ** to 128-bit UUIDs, then compared. |
| ** |
| ** NOTE it is assumed that the arrays are in Big Endian format |
| ** |
| ** Returns TRUE if matched, else FALSE |
| ** |
| *******************************************************************************/ |
| BOOLEAN sdpu_compare_uuid_arrays (UINT8 *p_uuid1, UINT32 len1, UINT8 *p_uuid2, UINT16 len2) |
| { |
| UINT8 nu1[MAX_UUID_SIZE]; |
| UINT8 nu2[MAX_UUID_SIZE]; |
| |
| if( ((len1 != 2) && (len1 != 4) && (len1 != 16)) || |
| ((len2 != 2) && (len2 != 4) && (len2 != 16)) ) |
| { |
| SDP_TRACE_ERROR("%s: invalid length", __func__); |
| return FALSE; |
| } |
| |
| /* If lengths match, do a straight compare */ |
| if (len1 == len2) |
| { |
| if (len1 == 2) |
| return ((p_uuid1[0] == p_uuid2[0]) && (p_uuid1[1] == p_uuid2[1])); |
| if (len1 == 4) |
| return ( (p_uuid1[0] == p_uuid2[0]) && (p_uuid1[1] == p_uuid2[1]) |
| && (p_uuid1[2] == p_uuid2[2]) && (p_uuid1[3] == p_uuid2[3]) ); |
| else |
| return (memcmp (p_uuid1, p_uuid2, (size_t)len1) == 0); |
| } |
| else if (len1 > len2) |
| { |
| /* If the len1 was 4-byte, (so len2 is 2-byte), compare on the fly */ |
| if (len1 == 4) |
| { |
| return ( (p_uuid1[0] == 0) && (p_uuid1[1] == 0) |
| && (p_uuid1[2] == p_uuid2[0]) && (p_uuid1[3] == p_uuid2[1]) ); |
| } |
| else |
| { |
| /* Normalize UUIDs to 16-byte form, then compare. Len1 must be 16 */ |
| memcpy (nu1, p_uuid1, MAX_UUID_SIZE); |
| memcpy (nu2, sdp_base_uuid, MAX_UUID_SIZE); |
| |
| if (len2 == 4) |
| memcpy (nu2, p_uuid2, len2); |
| else if (len2 == 2) |
| memcpy (nu2 + 2, p_uuid2, len2); |
| |
| return (memcmp (nu1, nu2, MAX_UUID_SIZE) == 0); |
| } |
| } |
| else |
| { |
| /* len2 is greater than len1 */ |
| /* If the len2 was 4-byte, (so len1 is 2-byte), compare on the fly */ |
| if (len2 == 4) |
| { |
| return ( (p_uuid2[0] == 0) && (p_uuid2[1] == 0) |
| && (p_uuid2[2] == p_uuid1[0]) && (p_uuid2[3] == p_uuid1[1]) ); |
| } |
| else |
| { |
| /* Normalize UUIDs to 16-byte form, then compare. Len1 must be 16 */ |
| memcpy (nu2, p_uuid2, MAX_UUID_SIZE); |
| memcpy (nu1, sdp_base_uuid, MAX_UUID_SIZE); |
| |
| if (len1 == 4) |
| memcpy (nu1, p_uuid1, (size_t)len1); |
| else if (len1 == 2) |
| memcpy (nu1 + 2, p_uuid1, (size_t)len1); |
| |
| return (memcmp (nu1, nu2, MAX_UUID_SIZE) == 0); |
| } |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_compare_bt_uuids |
| ** |
| ** Description This function compares 2 BT UUID structures. |
| ** |
| ** NOTE it is assumed that BT UUID structures are compressed to the |
| ** smallest possible UUIDs (by removing the base SDP UUID) |
| ** |
| ** Returns TRUE if matched, else FALSE |
| ** |
| *******************************************************************************/ |
| BOOLEAN sdpu_compare_bt_uuids (tBT_UUID *p_uuid1, tBT_UUID *p_uuid2) |
| { |
| /* Lengths must match for BT UUIDs to match */ |
| if (p_uuid1->len == p_uuid2->len) |
| { |
| if (p_uuid1->len == 2) |
| return (p_uuid1->uu.uuid16 == p_uuid2->uu.uuid16); |
| else if (p_uuid1->len == 4) |
| return (p_uuid1->uu.uuid32 == p_uuid2->uu.uuid32); |
| else if (!memcmp (p_uuid1->uu.uuid128, p_uuid2->uu.uuid128, 16)) |
| return (TRUE); |
| } |
| |
| return (FALSE); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_compare_uuid_with_attr |
| ** |
| ** Description This function compares a BT UUID structure with the UUID in an |
| ** SDP attribute record. If needed, they are expanded to 128-bit |
| ** UUIDs, then compared. |
| ** |
| ** NOTE - it is assumed that BT UUID structures are compressed to the |
| ** smallest possible UUIDs (by removing the base SDP UUID). |
| ** - it is also assumed that the discovery atribute is compressed |
| ** to the smallest possible |
| ** |
| ** Returns TRUE if matched, else FALSE |
| ** |
| *******************************************************************************/ |
| BOOLEAN sdpu_compare_uuid_with_attr (tBT_UUID *p_btuuid, tSDP_DISC_ATTR *p_attr) |
| { |
| UINT16 attr_len = SDP_DISC_ATTR_LEN (p_attr->attr_len_type); |
| |
| /* Since both UUIDs are compressed, lengths must match */ |
| if (p_btuuid->len != attr_len) |
| return (FALSE); |
| |
| if (p_btuuid->len == 2) |
| return (BOOLEAN)(p_btuuid->uu.uuid16 == p_attr->attr_value.v.u16); |
| else if (p_btuuid->len == 4) |
| return (BOOLEAN)(p_btuuid->uu.uuid32 == p_attr->attr_value.v.u32); |
| /* coverity[overrun-buffer-arg] */ |
| /* |
| Event overrun-buffer-arg: Overrun of static array "&p_attr->attr_value.v.array" of size 4 bytes by passing it to a function which indexes it with argument "16U" at byte position 15 |
| FALSE-POSITIVE error from Coverity test tool. Please do NOT remove following comment. |
| False-positive: SDP uses scratch buffer to hold the attribute value. |
| The actual size of tSDP_DISC_ATVAL does not matter. |
| If the array size in tSDP_DISC_ATVAL is increase, we would increase the system RAM usage unnecessarily |
| */ |
| else if (!memcmp (p_btuuid->uu.uuid128,(void*) p_attr->attr_value.v.array, MAX_UUID_SIZE)) |
| return (TRUE); |
| |
| return (FALSE); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_sort_attr_list |
| ** |
| ** Description sorts a list of attributes in numeric order from lowest to |
| ** highest to conform to SDP specification |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void sdpu_sort_attr_list( UINT16 num_attr, tSDP_DISCOVERY_DB *p_db ) |
| { |
| UINT16 i; |
| UINT16 x; |
| |
| /* Done if no attributes to sort */ |
| if (num_attr <= 1) |
| { |
| return; |
| } |
| else if (num_attr > SDP_MAX_ATTR_FILTERS) |
| { |
| num_attr = SDP_MAX_ATTR_FILTERS; |
| } |
| |
| num_attr--; /* for the for-loop */ |
| for( i = 0; i < num_attr; ) |
| { |
| if( p_db->attr_filters[i] > p_db->attr_filters[i+1] ) |
| { |
| /* swap the attribute IDs and start from the beginning */ |
| x = p_db->attr_filters[i]; |
| p_db->attr_filters[i] = p_db->attr_filters[i+1]; |
| p_db->attr_filters[i+1] = x; |
| |
| i = 0; |
| } |
| else |
| i++; |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_get_list_len |
| ** |
| ** Description gets the total list length in the sdp database for a given |
| ** uid sequence and attr sequence |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| UINT16 sdpu_get_list_len(tSDP_UUID_SEQ *uid_seq, tSDP_ATTR_SEQ *attr_seq) |
| { |
| tSDP_RECORD *p_rec; |
| UINT16 len = 0; |
| UINT16 len1; |
| |
| for (p_rec = sdp_db_service_search (NULL, uid_seq); p_rec; p_rec = sdp_db_service_search (p_rec, uid_seq)) |
| { |
| len += 3; |
| |
| len1 = sdpu_get_attrib_seq_len(p_rec, attr_seq ); |
| |
| if (len1 != 0) |
| len += len1; |
| else |
| len -= 3; |
| } |
| return len; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_get_attrib_seq_len |
| ** |
| ** Description gets the length of the specific attributes in a given |
| ** sdp record |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| UINT16 sdpu_get_attrib_seq_len(tSDP_RECORD *p_rec, tSDP_ATTR_SEQ *attr_seq) |
| { |
| tSDP_ATTRIBUTE *p_attr; |
| UINT16 len1 = 0; |
| UINT16 xx; |
| BOOLEAN is_range = FALSE; |
| UINT16 start_id=0, end_id=0; |
| |
| for (xx = 0; xx < attr_seq->num_attr; xx++) |
| { |
| if (is_range == FALSE) |
| { |
| start_id = attr_seq->attr_entry[xx].start; |
| end_id = attr_seq->attr_entry[xx].end; |
| } |
| p_attr = sdp_db_find_attr_in_rec (p_rec, |
| start_id, |
| end_id); |
| if (p_attr) |
| { |
| len1 += sdpu_get_attrib_entry_len (p_attr); |
| |
| /* If doing a range, stick with this one till no more attributes found */ |
| if (start_id != end_id) |
| { |
| /* Update for next time through */ |
| start_id = p_attr->id + 1; |
| xx--; |
| is_range = TRUE; |
| } |
| else |
| is_range = FALSE; |
| } |
| else |
| is_range = FALSE; |
| } |
| return len1; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_get_attrib_entry_len |
| ** |
| ** Description gets the length of a specific attribute |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| UINT16 sdpu_get_attrib_entry_len(tSDP_ATTRIBUTE *p_attr) |
| { |
| UINT16 len = 3; |
| |
| /* the attribute is in the db record. |
| * assuming the attribute len is less than SDP_MAX_ATTR_LEN */ |
| switch(p_attr->type) |
| { |
| case TEXT_STR_DESC_TYPE: /* 4 */ |
| case DATA_ELE_SEQ_DESC_TYPE:/* 6 */ |
| case DATA_ELE_ALT_DESC_TYPE:/* 7 */ |
| case URL_DESC_TYPE: /* 8 */ |
| #if (SDP_MAX_ATTR_LEN > 0xFFFF) |
| if(p_attr->len > 0xFFFF) |
| { |
| len += 5; |
| } |
| else |
| |
| #endif/* 0xFFFF - 0xFF */ |
| #if (SDP_MAX_ATTR_LEN > 0xFF) |
| if(p_attr->len > 0xFF) |
| { |
| len += 3; |
| } |
| else |
| |
| #endif /* 0xFF and less*/ |
| { |
| len += 2; |
| } |
| len += p_attr->len; |
| return len; |
| } |
| |
| /* Now, the attribute value */ |
| switch (p_attr->len) |
| { |
| case 1: |
| case 2: |
| case 4: |
| case 8: |
| case 16: |
| len += 1; |
| break; |
| default: |
| len += 2; |
| break; |
| } |
| |
| len += p_attr->len; |
| return len; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_build_partial_attrib_entry |
| ** |
| ** Description This function fills a buffer with partial attribute. It is |
| ** assumed that the maximum size of any attribute is 256 bytes. |
| ** |
| ** p_out: output buffer |
| ** p_attr: attribute to be copied partially into p_out |
| ** rem_len: num bytes to copy into p_out |
| ** offset: current start offset within the attr that needs to be copied |
| ** |
| ** Returns Pointer to next byte in the output buffer. |
| ** offset is also updated |
| ** |
| *******************************************************************************/ |
| UINT8 *sdpu_build_partial_attrib_entry (UINT8 *p_out, tSDP_ATTRIBUTE *p_attr, UINT16 len, UINT16 *offset) |
| { |
| UINT8 *p_attr_buff = (UINT8 *)osi_malloc(sizeof(UINT8) * SDP_MAX_ATTR_LEN); |
| sdpu_build_attrib_entry(p_attr_buff, p_attr); |
| |
| UINT16 attr_len = sdpu_get_attrib_entry_len(p_attr); |
| |
| if (len > SDP_MAX_ATTR_LEN) |
| { |
| SDP_TRACE_ERROR("%s len %d exceeds SDP_MAX_ATTR_LEN", __func__, len); |
| len = SDP_MAX_ATTR_LEN; |
| } |
| |
| size_t len_to_copy = ((attr_len - *offset) < len) ? (attr_len - *offset) : len; |
| memcpy(p_out, &p_attr_buff[*offset], len_to_copy); |
| |
| p_out = &p_out[len_to_copy]; |
| *offset += len_to_copy; |
| |
| osi_free(p_attr_buff); |
| return p_out; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function sdpu_uuid16_to_uuid128 |
| ** |
| ** Description This function converts UUID-16 to UUID-128 by including the base UUID |
| ** |
| ** uuid16: 2-byte UUID |
| ** p_uuid128: Expanded 128-bit UUID |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void sdpu_uuid16_to_uuid128(UINT16 uuid16, UINT8* p_uuid128) |
| { |
| UINT16 uuid16_bo; |
| memset(p_uuid128, 0, 16); |
| |
| memcpy(p_uuid128, sdp_base_uuid, MAX_UUID_SIZE); |
| uuid16_bo = ntohs(uuid16); |
| memcpy(p_uuid128+ 2, &uuid16_bo, sizeof(uint16_t)); |
| } |
