| /****************************************************************************** |
| * |
| * Copyright (C) 2003-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains the action functions for device manager state |
| * machine. |
| * |
| ******************************************************************************/ |
| |
| #include <base/logging.h> |
| #include <string.h> |
| |
| #include <mutex> |
| |
| #include "bt_common.h" |
| #include "bta_api.h" |
| #include "bta_dm_api.h" |
| #include "bta_dm_int.h" |
| #include "bta_sys.h" |
| #include "btm_api.h" |
| |
| static void bta_dm_pm_cback(tBTA_SYS_CONN_STATUS status, uint8_t id, |
| uint8_t app_id, const RawAddress& peer_addr); |
| static void bta_dm_pm_set_mode(const RawAddress& peer_addr, |
| tBTA_DM_PM_ACTION pm_mode, |
| tBTA_DM_PM_REQ pm_req); |
| static void bta_dm_pm_timer_cback(void* data); |
| static void bta_dm_pm_btm_cback(const RawAddress& bd_addr, |
| tBTM_PM_STATUS status, uint16_t value, |
| uint8_t hci_status); |
| static bool bta_dm_pm_park(const RawAddress& peer_addr); |
| static bool bta_dm_pm_sniff(tBTA_DM_PEER_DEVICE* p_peer_dev, uint8_t index); |
| static bool bta_dm_pm_is_sco_active(); |
| static int bta_dm_get_sco_index(); |
| static void bta_dm_pm_hid_check(bool bScoActive); |
| static void bta_dm_pm_set_sniff_policy(tBTA_DM_PEER_DEVICE* p_dev, |
| bool bDisable); |
| static void bta_dm_pm_stop_timer_by_index(tBTA_PM_TIMER* p_timer, |
| uint8_t timer_idx); |
| |
| #if (BTM_SSR_INCLUDED == TRUE) |
| #if (BTA_HH_INCLUDED == TRUE) |
| #include "../hh/bta_hh_int.h" |
| /* BTA_DM_PM_SSR1 will be dedicated for HH SSR setting entry, no other profile |
| * can use it */ |
| #define BTA_DM_PM_SSR_HH BTA_DM_PM_SSR1 |
| #endif |
| static void bta_dm_pm_ssr(const RawAddress& peer_addr); |
| #endif |
| |
| tBTA_DM_CONNECTED_SRVCS bta_dm_conn_srvcs; |
| static std::recursive_mutex pm_timer_schedule_mutex; |
| static std::recursive_mutex pm_timer_state_mutex; |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_init_pm |
| * |
| * Description Initializes the BT low power manager |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_dm_init_pm(void) { |
| memset(&bta_dm_conn_srvcs, 0x00, sizeof(bta_dm_conn_srvcs)); |
| |
| /* if there are no power manger entries, so not register */ |
| if (p_bta_dm_pm_cfg[0].app_id != 0) { |
| bta_sys_pm_register((tBTA_SYS_CONN_CBACK*)bta_dm_pm_cback); |
| |
| BTM_PmRegister((BTM_PM_REG_SET | BTM_PM_REG_NOTIF), &bta_dm_cb.pm_id, |
| bta_dm_pm_btm_cback); |
| } |
| |
| /* Need to initialize all PM timer service IDs */ |
| for (int i = 0; i < BTA_DM_NUM_PM_TIMER; i++) { |
| for (int j = 0; j < BTA_DM_PM_MODE_TIMER_MAX; j++) |
| bta_dm_cb.pm_timer[i].srvc_id[j] = BTA_ID_MAX; |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_disable_pm |
| * |
| * Description Disable PM |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_dm_disable_pm(void) { |
| BTM_PmRegister(BTM_PM_DEREG, &bta_dm_cb.pm_id, NULL); |
| |
| /* |
| * Deregister the PM callback from the system handling to prevent |
| * re-enabling the PM timers after this call if the callback is invoked. |
| */ |
| bta_sys_pm_register((tBTA_SYS_CONN_CBACK*)NULL); |
| |
| /* Need to stop all active timers. */ |
| for (int i = 0; i < BTA_DM_NUM_PM_TIMER; i++) { |
| for (int j = 0; j < BTA_DM_PM_MODE_TIMER_MAX; j++) { |
| bta_dm_pm_stop_timer_by_index(&bta_dm_cb.pm_timer[i], j); |
| bta_dm_cb.pm_timer[i].pm_action[j] = BTA_DM_PM_NO_ACTION; |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_get_av_count |
| * |
| * Description Get the number of connected AV |
| * |
| * |
| * Returns number of av connections |
| * |
| ******************************************************************************/ |
| uint8_t bta_dm_get_av_count(void) { |
| uint8_t count = 0; |
| for (int i = 0; i < bta_dm_conn_srvcs.count; i++) { |
| if (bta_dm_conn_srvcs.conn_srvc[i].id == BTA_ID_AV) ++count; |
| } |
| return count; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_stop_timer |
| * |
| * Description stop a PM timer |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_dm_pm_stop_timer(const RawAddress& peer_addr) { |
| APPL_TRACE_DEBUG("%s: ", __func__); |
| |
| for (int i = 0; i < BTA_DM_NUM_PM_TIMER; i++) { |
| if (bta_dm_cb.pm_timer[i].in_use && |
| bta_dm_cb.pm_timer[i].peer_bdaddr == peer_addr) { |
| for (int j = 0; j < BTA_DM_PM_MODE_TIMER_MAX; j++) { |
| bta_dm_pm_stop_timer_by_index(&bta_dm_cb.pm_timer[i], j); |
| /* |
| * TODO: For now, stopping the timer does not reset |
| * pm_action[j]. |
| * The reason is because some of the internal logic that |
| * (re)assigns the pm_action[] values is taking into account |
| * the older value; e.g., see the pm_action[] assignment in |
| * function bta_dm_pm_start_timer(). |
| * Such subtlety in the execution logic is error prone, and |
| * should be eliminiated in the future. |
| */ |
| } |
| break; |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_pm_action_to_timer_idx |
| * |
| * Description convert power mode into timer index for each connected |
| * device |
| * |
| * |
| * Returns index of the power mode delay timer |
| * |
| ******************************************************************************/ |
| static uint8_t bta_pm_action_to_timer_idx(uint8_t pm_action) { |
| if (pm_action == BTA_DM_PM_SUSPEND) |
| return BTA_DM_PM_SUSPEND_TIMER_IDX; |
| else if (pm_action == BTA_DM_PM_PARK) |
| return BTA_DM_PM_PARK_TIMER_IDX; |
| else if ((pm_action & BTA_DM_PM_SNIFF) == BTA_DM_PM_SNIFF) |
| return BTA_DM_PM_SNIFF_TIMER_IDX; |
| |
| /* Active, no preference, no action and retry */ |
| return BTA_DM_PM_MODE_TIMER_MAX; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_stop_timer_by_mode |
| * |
| * Description stop a PM timer |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_dm_pm_stop_timer_by_mode(const RawAddress& peer_addr, |
| uint8_t power_mode) { |
| const uint8_t timer_idx = bta_pm_action_to_timer_idx(power_mode); |
| if (timer_idx == BTA_DM_PM_MODE_TIMER_MAX) return; |
| |
| for (int i = 0; i < BTA_DM_NUM_PM_TIMER; i++) { |
| if (bta_dm_cb.pm_timer[i].in_use && |
| bta_dm_cb.pm_timer[i].peer_bdaddr == peer_addr) { |
| if (bta_dm_cb.pm_timer[i].srvc_id[timer_idx] != BTA_ID_MAX) { |
| bta_dm_pm_stop_timer_by_index(&bta_dm_cb.pm_timer[i], timer_idx); |
| /* |
| * TODO: Intentionally setting pm_action[timer_idx]. |
| * This assignment should be eliminated in the future - see the |
| * pm_action[] related comment inside function |
| * bta_dm_pm_stop_timer(). |
| */ |
| bta_dm_cb.pm_timer[i].pm_action[timer_idx] = power_mode; |
| } |
| break; |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_stop_timer_by_srvc_id |
| * |
| * Description stop all timer started by the service ID. |
| * |
| * |
| * Returns index of the power mode delay timer |
| * |
| ******************************************************************************/ |
| static void bta_dm_pm_stop_timer_by_srvc_id(const RawAddress& peer_addr, |
| uint8_t srvc_id) { |
| for (int i = 0; i < BTA_DM_NUM_PM_TIMER; i++) { |
| if (bta_dm_cb.pm_timer[i].in_use && |
| bta_dm_cb.pm_timer[i].peer_bdaddr == peer_addr) { |
| for (int j = 0; j < BTA_DM_PM_MODE_TIMER_MAX; j++) { |
| if (bta_dm_cb.pm_timer[i].srvc_id[j] == srvc_id) { |
| bta_dm_pm_stop_timer_by_index(&bta_dm_cb.pm_timer[i], j); |
| bta_dm_cb.pm_timer[i].pm_action[j] = BTA_DM_PM_NO_ACTION; |
| break; |
| } |
| } |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_start_timer |
| * |
| * Description start a PM timer |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_dm_pm_start_timer(tBTA_PM_TIMER* p_timer, uint8_t timer_idx, |
| period_ms_t timeout_ms, uint8_t srvc_id, |
| uint8_t pm_action) { |
| std::unique_lock<std::recursive_mutex> schedule_lock(pm_timer_schedule_mutex); |
| std::unique_lock<std::recursive_mutex> state_lock(pm_timer_state_mutex); |
| p_timer->in_use = true; |
| |
| if (p_timer->srvc_id[timer_idx] == BTA_ID_MAX) p_timer->active++; |
| |
| if (p_timer->pm_action[timer_idx] < pm_action) |
| p_timer->pm_action[timer_idx] = pm_action; |
| |
| p_timer->srvc_id[timer_idx] = srvc_id; |
| state_lock.unlock(); |
| |
| alarm_set_on_mloop(p_timer->timer[timer_idx], timeout_ms, |
| bta_dm_pm_timer_cback, p_timer->timer[timer_idx]); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_stop_timer_by_index |
| * |
| * Description stop a PM timer |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_dm_pm_stop_timer_by_index(tBTA_PM_TIMER* p_timer, |
| uint8_t timer_idx) { |
| if ((p_timer == NULL) || (timer_idx >= BTA_DM_PM_MODE_TIMER_MAX)) return; |
| |
| std::unique_lock<std::recursive_mutex> schedule_lock(pm_timer_schedule_mutex); |
| std::unique_lock<std::recursive_mutex> state_lock(pm_timer_state_mutex); |
| if (p_timer->srvc_id[timer_idx] == BTA_ID_MAX) |
| return; /* The timer was not scheduled */ |
| |
| CHECK(p_timer->in_use && (p_timer->active > 0)); |
| |
| p_timer->srvc_id[timer_idx] = BTA_ID_MAX; |
| /* NOTE: pm_action[timer_idx] intentionally not reset */ |
| |
| p_timer->active--; |
| if (p_timer->active == 0) p_timer->in_use = false; |
| state_lock.unlock(); |
| |
| alarm_cancel(p_timer->timer[timer_idx]); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_cback |
| * |
| * Description Conn change callback from sys for low power management |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_dm_pm_cback(tBTA_SYS_CONN_STATUS status, uint8_t id, |
| uint8_t app_id, const RawAddress& peer_addr) { |
| uint8_t i, j; |
| uint8_t* p = NULL; |
| tBTA_DM_PEER_DEVICE* p_dev; |
| tBTA_DM_PM_REQ pm_req = BTA_DM_PM_NEW_REQ; |
| |
| #if (BTM_SSR_INCLUDED == TRUE) |
| int index = BTA_DM_PM_SSR0; |
| #endif |
| |
| APPL_TRACE_DEBUG("bta_dm_pm_cback: st(%d), id(%d), app(%d)", status, id, |
| app_id); |
| |
| p_dev = bta_dm_find_peer_device(peer_addr); |
| |
| /* find if there is an power mode entry for the service */ |
| for (i = 1; i <= p_bta_dm_pm_cfg[0].app_id; i++) { |
| if ((p_bta_dm_pm_cfg[i].id == id) && |
| ((p_bta_dm_pm_cfg[i].app_id == BTA_ALL_APP_ID) || |
| (p_bta_dm_pm_cfg[i].app_id == app_id))) |
| break; |
| } |
| |
| /* if no entries are there for the app_id and subsystem in p_bta_dm_pm_spec*/ |
| if (i > p_bta_dm_pm_cfg[0].app_id) return; |
| |
| bta_dm_pm_stop_timer_by_srvc_id(peer_addr, id); |
| /*p_dev = bta_dm_find_peer_device(peer_addr);*/ |
| |
| #if (BTM_SSR_INCLUDED == TRUE) |
| /* set SSR parameters on SYS CONN OPEN */ |
| if ((BTA_SYS_CONN_OPEN == status) && p_dev && |
| (p_dev->info & BTA_DM_DI_USE_SSR)) { |
| index = p_bta_dm_pm_spec[p_bta_dm_pm_cfg[i].spec_idx].ssr; |
| } |
| #endif |
| |
| /* if no action for the event */ |
| if (p_bta_dm_pm_spec[p_bta_dm_pm_cfg[i].spec_idx] |
| .actn_tbl[status][0] |
| .power_mode == BTA_DM_PM_NO_ACTION) { |
| #if (BTM_SSR_INCLUDED == TRUE) |
| if (BTA_DM_PM_SSR0 == index) /* and do not need to set SSR, return. */ |
| #endif |
| return; |
| } |
| |
| for (j = 0; j < bta_dm_conn_srvcs.count; j++) { |
| /* check if an entry already present */ |
| if ((bta_dm_conn_srvcs.conn_srvc[j].id == id) && |
| (bta_dm_conn_srvcs.conn_srvc[j].app_id == app_id) && |
| bta_dm_conn_srvcs.conn_srvc[j].peer_bdaddr == peer_addr) { |
| bta_dm_conn_srvcs.conn_srvc[j].new_request = true; |
| break; |
| } |
| } |
| |
| /* if subsystem has no more preference on the power mode remove |
| the cb */ |
| if (p_bta_dm_pm_spec[p_bta_dm_pm_cfg[i].spec_idx] |
| .actn_tbl[status][0] |
| .power_mode == BTA_DM_PM_NO_PREF) { |
| if (j != bta_dm_conn_srvcs.count) { |
| bta_dm_conn_srvcs.count--; |
| |
| for (; j < bta_dm_conn_srvcs.count; j++) { |
| memcpy(&bta_dm_conn_srvcs.conn_srvc[j], |
| &bta_dm_conn_srvcs.conn_srvc[j + 1], |
| sizeof(bta_dm_conn_srvcs.conn_srvc[j])); |
| } |
| } else { |
| APPL_TRACE_WARNING("bta_dm_act no entry for connected service cbs"); |
| return; |
| } |
| } else if (j == bta_dm_conn_srvcs.count) { |
| /* check if we have more connected service that cbs */ |
| if (bta_dm_conn_srvcs.count == BTA_DM_NUM_CONN_SRVS) { |
| APPL_TRACE_WARNING("bta_dm_act no more connected service cbs"); |
| return; |
| } |
| |
| /* fill in a new cb */ |
| bta_dm_conn_srvcs.conn_srvc[j].id = id; |
| bta_dm_conn_srvcs.conn_srvc[j].app_id = app_id; |
| bta_dm_conn_srvcs.conn_srvc[j].new_request = true; |
| bta_dm_conn_srvcs.conn_srvc[j].peer_bdaddr = peer_addr; |
| |
| APPL_TRACE_WARNING("new conn_srvc id:%d, app_id:%d", id, app_id); |
| |
| bta_dm_conn_srvcs.count++; |
| bta_dm_conn_srvcs.conn_srvc[j].state = status; |
| } else { |
| /* no service is added or removed. only updating status. */ |
| bta_dm_conn_srvcs.conn_srvc[j].state = status; |
| } |
| |
| /* stop timer */ |
| bta_dm_pm_stop_timer(peer_addr); |
| if (bta_dm_conn_srvcs.count > 0) { |
| pm_req = BTA_DM_PM_RESTART; |
| APPL_TRACE_DEBUG( |
| "%s bta_dm_pm_stop_timer for current service, restart other " |
| "service timers: count = %d", |
| __func__, bta_dm_conn_srvcs.count); |
| } |
| |
| if (p_dev) { |
| p_dev->pm_mode_attempted = 0; |
| p_dev->pm_mode_failed = 0; |
| } |
| |
| #if (BTM_SSR_INCLUDED == TRUE) |
| if (p_bta_dm_ssr_spec[index].max_lat |
| #if (BTA_HH_INCLUDED == TRUE) |
| || index == BTA_DM_PM_SSR_HH |
| #endif |
| ) { |
| bta_dm_pm_ssr(peer_addr); |
| } else { |
| if (((NULL != (p = BTM_ReadLocalFeatures())) && |
| HCI_SNIFF_SUB_RATE_SUPPORTED(p)) && |
| ((NULL != (p = BTM_ReadRemoteFeatures(peer_addr))) && |
| HCI_SNIFF_SUB_RATE_SUPPORTED(p)) && |
| (index == BTA_DM_PM_SSR0)) { |
| if (status == BTA_SYS_SCO_OPEN) { |
| APPL_TRACE_DEBUG("%s: SCO inactive, reset SSR to zero", __func__); |
| BTM_SetSsrParams(peer_addr, 0, 0, 0); |
| } else if (status == BTA_SYS_SCO_CLOSE) { |
| APPL_TRACE_DEBUG("%s: SCO active, back to old SSR", __func__); |
| bta_dm_pm_ssr(peer_addr); |
| } |
| } |
| } |
| #endif |
| |
| bta_dm_pm_set_mode(peer_addr, BTA_DM_PM_NO_ACTION, pm_req); |
| |
| /* perform the HID link workaround if needed |
| ** 1. If SCO up/down event is received OR |
| ** 2. If HID connection open is received and SCO is already active. |
| ** This will handle the case where HID connects when SCO already active |
| */ |
| if (BTM_IsDeviceUp() && |
| (((status == BTA_SYS_SCO_OPEN) || (status == BTA_SYS_SCO_CLOSE)) || |
| ((status == BTA_SYS_CONN_OPEN) && (id == BTA_ID_HH) && |
| bta_dm_pm_is_sco_active()))) { |
| bool bScoActive; |
| if (status == BTA_SYS_CONN_OPEN) |
| bScoActive = true; |
| else |
| bScoActive = (status == BTA_SYS_SCO_OPEN); |
| |
| bta_dm_pm_hid_check(bScoActive); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_set_mode |
| * |
| * Description Set the power mode for the device |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| |
| static void bta_dm_pm_set_mode(const RawAddress& peer_addr, |
| tBTA_DM_PM_ACTION pm_request, |
| tBTA_DM_PM_REQ pm_req) { |
| tBTA_DM_PM_ACTION pm_action = BTA_DM_PM_NO_ACTION; |
| period_ms_t timeout_ms = 0; |
| uint8_t i, j; |
| tBTA_DM_PM_ACTION failed_pm = 0; |
| tBTA_DM_PEER_DEVICE* p_peer_device = NULL; |
| tBTA_DM_PM_ACTION allowed_modes = 0; |
| tBTA_DM_PM_ACTION pref_modes = 0; |
| tBTA_DM_PM_CFG* p_pm_cfg; |
| tBTA_DM_PM_SPEC* p_pm_spec; |
| tBTA_DM_PM_ACTN *p_act0, *p_act1; |
| tBTA_DM_SRVCS* p_srvcs = NULL; |
| bool timer_started = false; |
| uint8_t timer_idx, available_timer = BTA_DM_PM_MODE_TIMER_MAX; |
| period_ms_t remaining_ms = 0; |
| |
| if (!bta_dm_cb.device_list.count) return; |
| |
| /* see if any attempt to put device in low power mode failed */ |
| p_peer_device = bta_dm_find_peer_device(peer_addr); |
| /* if no peer device found return */ |
| if (p_peer_device == NULL) return; |
| |
| failed_pm = p_peer_device->pm_mode_failed; |
| |
| for (i = 0; i < bta_dm_conn_srvcs.count; i++) { |
| p_srvcs = &bta_dm_conn_srvcs.conn_srvc[i]; |
| if (p_srvcs->peer_bdaddr == peer_addr) { |
| /* p_bta_dm_pm_cfg[0].app_id is the number of entries */ |
| for (j = 1; j <= p_bta_dm_pm_cfg[0].app_id; j++) { |
| if ((p_bta_dm_pm_cfg[j].id == p_srvcs->id) && |
| ((p_bta_dm_pm_cfg[j].app_id == BTA_ALL_APP_ID) || |
| (p_bta_dm_pm_cfg[j].app_id == p_srvcs->app_id))) |
| break; |
| } |
| |
| p_pm_cfg = &p_bta_dm_pm_cfg[j]; |
| p_pm_spec = &p_bta_dm_pm_spec[p_pm_cfg->spec_idx]; |
| p_act0 = &p_pm_spec->actn_tbl[p_srvcs->state][0]; |
| p_act1 = &p_pm_spec->actn_tbl[p_srvcs->state][1]; |
| |
| APPL_TRACE_DEBUG("bta_dm_pm_set_mode: srvcsid: %d, state: %d, j: %d", |
| p_srvcs->id, p_srvcs->state, j); |
| allowed_modes |= p_pm_spec->allow_mask; |
| |
| /* PM actions are in the order of strictness */ |
| |
| /* first check if the first preference is ok */ |
| if (!(failed_pm & p_act0->power_mode)) { |
| pref_modes |= p_act0->power_mode; |
| |
| if (p_act0->power_mode >= pm_action) { |
| pm_action = p_act0->power_mode; |
| |
| if (pm_req != BTA_DM_PM_NEW_REQ || p_srvcs->new_request) { |
| p_srvcs->new_request = false; |
| timeout_ms = p_act0->timeout; |
| } |
| } |
| } |
| /* if first preference has already failed, try second preference */ |
| else if (!(failed_pm & p_act1->power_mode)) { |
| pref_modes |= p_act1->power_mode; |
| |
| if (p_act1->power_mode > pm_action) { |
| pm_action = p_act1->power_mode; |
| timeout_ms = p_act1->timeout; |
| } |
| } |
| } |
| } |
| |
| if (pm_action & (BTA_DM_PM_PARK | BTA_DM_PM_SNIFF)) { |
| /* some service don't like the mode */ |
| if (!(allowed_modes & pm_action)) { |
| /* select the other mode if its allowed and preferred, otherwise 0 which |
| * is BTA_DM_PM_NO_ACTION */ |
| pm_action = |
| (allowed_modes & (BTA_DM_PM_PARK | BTA_DM_PM_SNIFF) & pref_modes); |
| |
| /* no timeout needed if no action is required */ |
| if (pm_action == BTA_DM_PM_NO_ACTION) { |
| timeout_ms = 0; |
| } |
| } |
| } |
| /* if need to start a timer */ |
| if ((pm_req != BTA_DM_PM_EXECUTE) && (timeout_ms > 0)) { |
| for (i = 0; i < BTA_DM_NUM_PM_TIMER; i++) { |
| if (bta_dm_cb.pm_timer[i].in_use && |
| bta_dm_cb.pm_timer[i].peer_bdaddr == peer_addr) { |
| timer_idx = bta_pm_action_to_timer_idx(pm_action); |
| if (timer_idx != BTA_DM_PM_MODE_TIMER_MAX) { |
| remaining_ms = |
| alarm_get_remaining_ms(bta_dm_cb.pm_timer[i].timer[timer_idx]); |
| if (remaining_ms < timeout_ms) { |
| /* Cancel and restart the timer */ |
| /* |
| * TODO: The value of pm_action[timer_idx] is |
| * conditionally updated between the two function |
| * calls below when the timer is restarted. |
| * This logic is error-prone and should be eliminated |
| * in the future. |
| */ |
| bta_dm_pm_stop_timer_by_index(&bta_dm_cb.pm_timer[i], timer_idx); |
| bta_dm_pm_start_timer(&bta_dm_cb.pm_timer[i], timer_idx, timeout_ms, |
| p_srvcs->id, pm_action); |
| } |
| timer_started = true; |
| } |
| break; |
| } else if (!bta_dm_cb.pm_timer[i].in_use) { |
| APPL_TRACE_DEBUG("%s dm_pm_timer:%d, %d ms", __func__, i, timeout_ms); |
| if (available_timer == BTA_DM_PM_MODE_TIMER_MAX) available_timer = i; |
| } |
| } |
| /* new power mode for a new active connection */ |
| if (!timer_started) { |
| if (available_timer != BTA_DM_PM_MODE_TIMER_MAX) { |
| bta_dm_cb.pm_timer[available_timer].peer_bdaddr = peer_addr; |
| timer_idx = bta_pm_action_to_timer_idx(pm_action); |
| if (timer_idx != BTA_DM_PM_MODE_TIMER_MAX) { |
| bta_dm_pm_start_timer(&bta_dm_cb.pm_timer[available_timer], timer_idx, |
| timeout_ms, p_srvcs->id, pm_action); |
| timer_started = true; |
| } |
| } |
| /* no more timers */ |
| else { |
| APPL_TRACE_WARNING("bta_dm_act dm_pm_timer no more"); |
| } |
| } |
| return; |
| } |
| /* if pending power mode timer expires, and currecnt link is in a |
| lower power mode than current profile requirement, igonre it */ |
| if (pm_req == BTA_DM_PM_EXECUTE && pm_request < pm_action) { |
| APPL_TRACE_ERROR("Ignore the power mode request: %d", pm_request) |
| return; |
| } |
| if (pm_action == BTA_DM_PM_PARK) { |
| p_peer_device->pm_mode_attempted = BTA_DM_PM_PARK; |
| bta_dm_pm_park(peer_addr); |
| } else if (pm_action & BTA_DM_PM_SNIFF) { |
| /* dont initiate SNIFF, if link_policy has it disabled */ |
| if (p_peer_device->link_policy & HCI_ENABLE_SNIFF_MODE) { |
| p_peer_device->pm_mode_attempted = BTA_DM_PM_SNIFF; |
| bta_dm_pm_sniff(p_peer_device, (uint8_t)(pm_action & 0x0F)); |
| } else { |
| APPL_TRACE_DEBUG( |
| "bta_dm_pm_set_mode: Link policy disallows SNIFF, ignore request"); |
| } |
| } else if (pm_action == BTA_DM_PM_ACTIVE) { |
| bta_dm_pm_active(peer_addr); |
| } |
| } |
| /******************************************************************************* |
| * |
| * Function bta_ag_pm_park |
| * |
| * Description Switch to park mode. |
| * |
| * |
| * Returns true if park attempted, false otherwise. |
| * |
| ******************************************************************************/ |
| static bool bta_dm_pm_park(const RawAddress& peer_addr) { |
| tBTM_PM_MODE mode = BTM_PM_STS_ACTIVE; |
| |
| /* if not in park mode, switch to park */ |
| BTM_ReadPowerMode(peer_addr, &mode); |
| |
| if (mode != BTM_PM_MD_PARK) { |
| BTM_SetPowerMode(bta_dm_cb.pm_id, peer_addr, |
| &p_bta_dm_pm_md[BTA_DM_PM_PARK_IDX]); |
| } |
| return true; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_ag_pm_sniff |
| * |
| * Description Switch to sniff mode. |
| * |
| * |
| * Returns true if sniff attempted, false otherwise. |
| * |
| ******************************************************************************/ |
| static bool bta_dm_pm_sniff(tBTA_DM_PEER_DEVICE* p_peer_dev, uint8_t index) { |
| tBTM_PM_MODE mode = BTM_PM_STS_ACTIVE; |
| tBTM_PM_PWR_MD pwr_md; |
| tBTM_STATUS status; |
| #if (BTM_SSR_INCLUDED == TRUE) |
| uint8_t* p_rem_feat = NULL; |
| #endif |
| |
| BTM_ReadPowerMode(p_peer_dev->peer_bdaddr, &mode); |
| p_rem_feat = BTM_ReadRemoteFeatures(p_peer_dev->peer_bdaddr); |
| #if (BTM_SSR_INCLUDED == TRUE) |
| APPL_TRACE_DEBUG("bta_dm_pm_sniff cur:%d, idx:%d, info:x%x", mode, index, |
| p_peer_dev->info); |
| if (mode != BTM_PM_MD_SNIFF || |
| (HCI_SNIFF_SUB_RATE_SUPPORTED(BTM_ReadLocalFeatures()) && p_rem_feat && |
| HCI_SNIFF_SUB_RATE_SUPPORTED(p_rem_feat) && |
| !(p_peer_dev->info & BTA_DM_DI_USE_SSR))) |
| #else |
| APPL_TRACE_DEBUG("bta_dm_pm_sniff cur:%d, idx:%d", mode, index); |
| if (mode != BTM_PM_MD_SNIFF) |
| #endif |
| { |
| #if (BTM_SSR_INCLUDED == TRUE) |
| /* Dont initiate Sniff if controller has alreay accepted |
| * remote sniff params. This avoid sniff loop issue with |
| * some agrresive headsets who use sniff latencies more than |
| * DUT supported range of Sniff intervals.*/ |
| if ((mode == BTM_PM_MD_SNIFF) && (p_peer_dev->info & BTA_DM_DI_ACP_SNIFF)) { |
| APPL_TRACE_DEBUG("%s: already in remote initiate sniff", __func__); |
| return true; |
| } |
| #endif |
| /* if the current mode is not sniff, issue the sniff command. |
| * If sniff, but SSR is not used in this link, still issue the command */ |
| memcpy(&pwr_md, &p_bta_dm_pm_md[index], sizeof(tBTM_PM_PWR_MD)); |
| if (p_peer_dev->info & BTA_DM_DI_INT_SNIFF) { |
| pwr_md.mode |= BTM_PM_MD_FORCE; |
| } |
| status = |
| BTM_SetPowerMode(bta_dm_cb.pm_id, p_peer_dev->peer_bdaddr, &pwr_md); |
| if (status == BTM_CMD_STORED || status == BTM_CMD_STARTED) { |
| p_peer_dev->info &= ~(BTA_DM_DI_INT_SNIFF | BTA_DM_DI_ACP_SNIFF); |
| p_peer_dev->info |= BTA_DM_DI_SET_SNIFF; |
| } else if (status == BTM_SUCCESS) { |
| APPL_TRACE_DEBUG( |
| "bta_dm_pm_sniff BTM_SetPowerMode() returns BTM_SUCCESS"); |
| p_peer_dev->info &= |
| ~(BTA_DM_DI_INT_SNIFF | BTA_DM_DI_ACP_SNIFF | BTA_DM_DI_SET_SNIFF); |
| } else /* error */ |
| { |
| APPL_TRACE_ERROR( |
| "bta_dm_pm_sniff BTM_SetPowerMode() returns ERROR status=%d", status); |
| p_peer_dev->info &= |
| ~(BTA_DM_DI_INT_SNIFF | BTA_DM_DI_ACP_SNIFF | BTA_DM_DI_SET_SNIFF); |
| } |
| } |
| return true; |
| } |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_ssr |
| * |
| * Description checks and sends SSR parameters |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| #if (BTM_SSR_INCLUDED == TRUE) |
| static void bta_dm_pm_ssr(const RawAddress& peer_addr) { |
| tBTA_DM_SSR_SPEC *p_spec, *p_spec_cur; |
| uint8_t i, j; |
| int ssr = BTA_DM_PM_SSR0; |
| |
| /* go through the connected services */ |
| for (i = 0; i < bta_dm_conn_srvcs.count; i++) { |
| if (bta_dm_conn_srvcs.conn_srvc[i].peer_bdaddr == peer_addr) { |
| /* p_bta_dm_pm_cfg[0].app_id is the number of entries */ |
| for (j = 1; j <= p_bta_dm_pm_cfg[0].app_id; j++) { |
| /* find the associated p_bta_dm_pm_cfg */ |
| if ((p_bta_dm_pm_cfg[j].id == bta_dm_conn_srvcs.conn_srvc[i].id) && |
| ((p_bta_dm_pm_cfg[j].app_id == BTA_ALL_APP_ID) || |
| (p_bta_dm_pm_cfg[j].app_id == |
| bta_dm_conn_srvcs.conn_srvc[i].app_id))) { |
| APPL_TRACE_WARNING("bta_dm_pm_ssr conn_srvc id:%d, app_id:%d", |
| bta_dm_conn_srvcs.conn_srvc[i].id, |
| bta_dm_conn_srvcs.conn_srvc[i].app_id); |
| break; |
| } |
| } |
| |
| /* find the ssr index with the smallest max latency. */ |
| p_spec_cur = |
| &p_bta_dm_ssr_spec[p_bta_dm_pm_spec[p_bta_dm_pm_cfg[j].spec_idx].ssr]; |
| p_spec = &p_bta_dm_ssr_spec[ssr]; |
| |
| #if (BTA_HH_INCLUDED == TRUE) |
| /* HH has the per connection SSR preference, already read the SSR params |
| * from BTA HH */ |
| if (p_bta_dm_pm_spec[p_bta_dm_pm_cfg[j].spec_idx].ssr == |
| BTA_DM_PM_SSR_HH) { |
| if (bta_hh_read_ssr_param(peer_addr, &p_spec_cur->max_lat, |
| &p_spec_cur->min_rmt_to) == BTA_HH_ERR) |
| continue; |
| } |
| #endif |
| if (p_spec_cur->max_lat < p_spec->max_lat || |
| (ssr == BTA_DM_PM_SSR0 && |
| p_bta_dm_pm_spec[p_bta_dm_pm_cfg[j].spec_idx].ssr != |
| BTA_DM_PM_SSR0)) { |
| ssr = p_bta_dm_pm_spec[p_bta_dm_pm_cfg[j].spec_idx].ssr; |
| } |
| } |
| } |
| |
| p_spec = &p_bta_dm_ssr_spec[ssr]; |
| APPL_TRACE_WARNING("%s ssr:%d, lat:%d", __func__, ssr, p_spec->max_lat); |
| |
| if (p_spec->max_lat) { |
| /* Avoid SSR reset on device which has SCO connected */ |
| if (bta_dm_pm_is_sco_active()) { |
| int idx = bta_dm_get_sco_index(); |
| if (idx != -1) { |
| if (bta_dm_conn_srvcs.conn_srvc[idx].peer_bdaddr == peer_addr) { |
| APPL_TRACE_WARNING("%s SCO is active on device, ignore SSR", |
| __func__); |
| return; |
| } |
| } |
| } |
| |
| /* set the SSR parameters. */ |
| BTM_SetSsrParams(peer_addr, p_spec->max_lat, p_spec->min_rmt_to, |
| p_spec->min_loc_to); |
| } |
| } |
| #endif |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_active |
| * |
| * Description Brings connection to active mode |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_dm_pm_active(const RawAddress& peer_addr) { |
| tBTM_PM_PWR_MD pm; |
| |
| memset((void*)&pm, 0, sizeof(pm)); |
| |
| /* switch to active mode */ |
| pm.mode = BTM_PM_MD_ACTIVE; |
| BTM_SetPowerMode(bta_dm_cb.pm_id, peer_addr, &pm); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_btm_cback |
| * |
| * Description BTM power manager callback. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_dm_pm_btm_cback(const RawAddress& bd_addr, |
| tBTM_PM_STATUS status, uint16_t value, |
| uint8_t hci_status) { |
| tBTA_DM_PM_BTM_STATUS* p_buf = |
| (tBTA_DM_PM_BTM_STATUS*)osi_malloc(sizeof(tBTA_DM_PM_BTM_STATUS)); |
| |
| p_buf->hdr.event = BTA_DM_PM_BTM_STATUS_EVT; |
| p_buf->status = status; |
| p_buf->value = value; |
| p_buf->hci_status = hci_status; |
| p_buf->bd_addr = bd_addr; |
| |
| bta_sys_sendmsg(p_buf); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_timer_cback |
| * |
| * Description Power management timer callback. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_dm_pm_timer_cback(void* data) { |
| uint8_t i, j; |
| alarm_t* alarm = (alarm_t*)data; |
| |
| std::unique_lock<std::recursive_mutex> state_lock(pm_timer_state_mutex); |
| for (i = 0; i < BTA_DM_NUM_PM_TIMER; i++) { |
| APPL_TRACE_DEBUG("dm_pm_timer[%d] in use? %d", i, |
| bta_dm_cb.pm_timer[i].in_use); |
| if (bta_dm_cb.pm_timer[i].in_use) { |
| for (j = 0; j < BTA_DM_PM_MODE_TIMER_MAX; j++) { |
| if (bta_dm_cb.pm_timer[i].timer[j] == alarm) { |
| bta_dm_cb.pm_timer[i].active--; |
| bta_dm_cb.pm_timer[i].srvc_id[j] = BTA_ID_MAX; |
| APPL_TRACE_DEBUG("dm_pm_timer[%d] expires, timer_idx=%d", i, j); |
| break; |
| } |
| } |
| if (bta_dm_cb.pm_timer[i].active == 0) |
| bta_dm_cb.pm_timer[i].in_use = false; |
| if (j < BTA_DM_PM_MODE_TIMER_MAX) break; |
| } |
| } |
| state_lock.unlock(); |
| |
| /* no more timers */ |
| if (i == BTA_DM_NUM_PM_TIMER) return; |
| |
| tBTA_DM_PM_TIMER* p_buf = |
| (tBTA_DM_PM_TIMER*)osi_malloc(sizeof(tBTA_DM_PM_TIMER)); |
| p_buf->hdr.event = BTA_DM_PM_TIMER_EVT; |
| p_buf->pm_request = bta_dm_cb.pm_timer[i].pm_action[j]; |
| p_buf->bd_addr = bta_dm_cb.pm_timer[i].peer_bdaddr; |
| |
| bta_sys_sendmsg(p_buf); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_btm_status |
| * |
| * Description Process pm status event from btm |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_dm_pm_btm_status(tBTA_DM_MSG* p_data) { |
| APPL_TRACE_DEBUG("%s status: %d", __func__, p_data->pm_status.status); |
| |
| tBTA_DM_PEER_DEVICE* p_dev = |
| bta_dm_find_peer_device(p_data->pm_status.bd_addr); |
| if (NULL == p_dev) return; |
| |
| tBTA_DM_DEV_INFO info = p_dev->info; |
| /* check new mode */ |
| switch (p_data->pm_status.status) { |
| case BTM_PM_STS_ACTIVE: |
| /* if our sniff or park attempt failed |
| we should not try it again*/ |
| if (p_data->pm_status.hci_status != 0) { |
| APPL_TRACE_ERROR("%s hci_status=%d", __func__, |
| p_data->pm_status.hci_status); |
| p_dev->info &= |
| ~(BTA_DM_DI_INT_SNIFF | BTA_DM_DI_ACP_SNIFF | BTA_DM_DI_SET_SNIFF); |
| |
| if (p_dev->pm_mode_attempted & (BTA_DM_PM_PARK | BTA_DM_PM_SNIFF)) { |
| p_dev->pm_mode_failed |= |
| ((BTA_DM_PM_PARK | BTA_DM_PM_SNIFF) & p_dev->pm_mode_attempted); |
| bta_dm_pm_stop_timer_by_mode(p_data->pm_status.bd_addr, |
| p_dev->pm_mode_attempted); |
| bta_dm_pm_set_mode(p_data->pm_status.bd_addr, BTA_DM_PM_NO_ACTION, |
| BTA_DM_PM_RESTART); |
| } |
| } else { |
| #if (BTM_SSR_INCLUDED == TRUE) |
| if (p_dev->prev_low) { |
| /* need to send the SSR paramaters to controller again */ |
| bta_dm_pm_ssr(p_dev->peer_bdaddr); |
| } |
| p_dev->prev_low = BTM_PM_STS_ACTIVE; |
| #endif |
| /* link to active mode, need to restart the timer for next low power |
| * mode if needed */ |
| bta_dm_pm_stop_timer(p_data->pm_status.bd_addr); |
| bta_dm_pm_set_mode(p_data->pm_status.bd_addr, BTA_DM_PM_NO_ACTION, |
| BTA_DM_PM_RESTART); |
| } |
| break; |
| |
| #if (BTM_SSR_INCLUDED == TRUE) |
| case BTM_PM_STS_PARK: |
| case BTM_PM_STS_HOLD: |
| /* save the previous low power mode - for SSR. |
| * SSR parameters are sent to controller on "conn open". |
| * the numbers stay good until park/hold/detach */ |
| if (p_dev->info & BTA_DM_DI_USE_SSR) |
| p_dev->prev_low = p_data->pm_status.status; |
| break; |
| |
| case BTM_PM_STS_SSR: |
| if (p_data->pm_status.value) |
| p_dev->info |= BTA_DM_DI_USE_SSR; |
| else |
| p_dev->info &= ~BTA_DM_DI_USE_SSR; |
| break; |
| #endif |
| case BTM_PM_STS_SNIFF: |
| if (p_data->pm_status.hci_status == 0) { |
| /* Stop PM timer now if already active for |
| * particular device since link is already |
| * put in sniff mode by remote device, and |
| * PM timer sole purpose is to put the link |
| * in sniff mode from host side. |
| */ |
| bta_dm_pm_stop_timer(p_data->pm_status.bd_addr); |
| } else { |
| p_dev->info &= |
| ~(BTA_DM_DI_SET_SNIFF | BTA_DM_DI_INT_SNIFF | BTA_DM_DI_ACP_SNIFF); |
| if (info & BTA_DM_DI_SET_SNIFF) |
| p_dev->info |= BTA_DM_DI_INT_SNIFF; |
| else |
| p_dev->info |= BTA_DM_DI_ACP_SNIFF; |
| } |
| break; |
| |
| case BTM_PM_STS_ERROR: |
| p_dev->info &= ~BTA_DM_DI_SET_SNIFF; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_timer |
| * |
| * Description Process pm timer event from btm |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void bta_dm_pm_timer(tBTA_DM_MSG* p_data) { |
| APPL_TRACE_EVENT("%s", __func__); |
| bta_dm_pm_set_mode(p_data->pm_timer.bd_addr, p_data->pm_timer.pm_request, |
| BTA_DM_PM_EXECUTE); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_find_peer_device |
| * |
| * Description Given an address, find the associated control block. |
| * |
| * Returns tBTA_DM_PEER_DEVICE |
| * |
| ******************************************************************************/ |
| tBTA_DM_PEER_DEVICE* bta_dm_find_peer_device(const RawAddress& peer_addr) { |
| tBTA_DM_PEER_DEVICE* p_dev = NULL; |
| |
| for (int i = 0; i < bta_dm_cb.device_list.count; i++) { |
| if (bta_dm_cb.device_list.peer_device[i].peer_bdaddr == peer_addr) { |
| p_dev = &bta_dm_cb.device_list.peer_device[i]; |
| break; |
| } |
| } |
| return p_dev; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_is_sco_active |
| * |
| * Description Loop through connected services for HFP+State=SCO |
| * |
| * Returns bool. true if SCO active, else false |
| * |
| ******************************************************************************/ |
| static bool bta_dm_pm_is_sco_active() { |
| int j; |
| bool bScoActive = false; |
| |
| for (j = 0; j < bta_dm_conn_srvcs.count; j++) { |
| /* check if an entry already present */ |
| if ((bta_dm_conn_srvcs.conn_srvc[j].id == BTA_ID_AG) && |
| (bta_dm_conn_srvcs.conn_srvc[j].state == BTA_SYS_SCO_OPEN)) { |
| bScoActive = true; |
| break; |
| } |
| } |
| |
| APPL_TRACE_DEBUG("bta_dm_is_sco_active: SCO active: %d", bScoActive); |
| return bScoActive; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_get_sco_index |
| * |
| * Description Loop through connected services for HFP+State=SCO |
| * |
| * Returns index at which SCO is connected, in absence of SCO return -1 |
| * |
| ******************************************************************************/ |
| static int bta_dm_get_sco_index() { |
| for (int j = 0; j < bta_dm_conn_srvcs.count; j++) { |
| /* check for SCO connected index */ |
| if ((bta_dm_conn_srvcs.conn_srvc[j].id == BTA_ID_AG) && |
| (bta_dm_conn_srvcs.conn_srvc[j].state == BTA_SYS_SCO_OPEN)) { |
| return j; |
| } |
| } |
| return -1; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_hid_check |
| * |
| * Description Disables/Enables sniff in link policy based on SCO Up/Down |
| * |
| * Returns None |
| * |
| ******************************************************************************/ |
| static void bta_dm_pm_hid_check(bool bScoActive) { |
| int j; |
| |
| /* if HID is active, disable the link policy */ |
| for (j = 0; j < bta_dm_conn_srvcs.count; j++) { |
| /* check if an entry already present */ |
| if (bta_dm_conn_srvcs.conn_srvc[j].id == BTA_ID_HH) { |
| APPL_TRACE_DEBUG( |
| "SCO status change(Active: %d), modify HID link policy. state: %d", |
| bScoActive, bta_dm_conn_srvcs.conn_srvc[j].state); |
| bta_dm_pm_set_sniff_policy( |
| bta_dm_find_peer_device(bta_dm_conn_srvcs.conn_srvc[j].peer_bdaddr), |
| bScoActive); |
| |
| /* if we had disabled link policy, seems like the hid device stop retrying |
| * SNIFF after a few tries. force sniff if needed */ |
| if (!bScoActive) |
| bta_dm_pm_set_mode(bta_dm_conn_srvcs.conn_srvc[j].peer_bdaddr, |
| BTA_DM_PM_NO_ACTION, BTA_DM_PM_RESTART); |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_set_sniff_policy |
| * |
| * Description Disables/Enables sniff in link policy for the give device |
| * |
| * Returns None |
| * |
| ******************************************************************************/ |
| static void bta_dm_pm_set_sniff_policy(tBTA_DM_PEER_DEVICE* p_dev, |
| bool bDisable) { |
| uint16_t policy_setting; |
| |
| if (!p_dev) return; |
| |
| if (bDisable) { |
| policy_setting = |
| bta_dm_cb.cur_policy & (HCI_ENABLE_MASTER_SLAVE_SWITCH | |
| HCI_ENABLE_HOLD_MODE | HCI_ENABLE_PARK_MODE); |
| |
| } else { |
| /* allow sniff after sco is closed */ |
| policy_setting = bta_dm_cb.cur_policy; |
| } |
| |
| /* if disabling SNIFF, make sure link is Active */ |
| if (bDisable) bta_dm_pm_active(p_dev->peer_bdaddr); |
| |
| /* update device record and set link policy */ |
| p_dev->link_policy = policy_setting; |
| BTM_SetLinkPolicy(p_dev->peer_bdaddr, &policy_setting); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_pm_obtain_controller_state |
| * |
| * Description This function obtains the consolidated controller power |
| * state |
| * |
| * Parameters: |
| * |
| ******************************************************************************/ |
| tBTA_DM_CONTRL_STATE bta_dm_pm_obtain_controller_state(void) { |
| /* Did not use counts as it is not sure, how accurate the count values are |
| *in |
| ** bta_dm_cb.device_list.count > 0 || bta_dm_cb.device_list.le_count > 0 */ |
| |
| tBTA_DM_CONTRL_STATE cur_state = BTA_DM_CONTRL_UNKNOWN; |
| cur_state = BTM_PM_ReadControllerState(); |
| |
| APPL_TRACE_DEBUG("bta_dm_pm_obtain_controller_state: %d", cur_state); |
| return cur_state; |
| } |
