blob: e9b3f645c5a0859a08c5455e14d1dfd4db876e4f [file] [log] [blame]
/******************************************************************************
*
* Copyright 2005-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This file contains the HID HOST API in the subsystem of BTA.
*
******************************************************************************/
#define LOG_TAG "bt_bta_hh"
#include "bta_hh_api.h"
#include "bt_target.h"
#if (BTA_HH_INCLUDED == TRUE)
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "bta_hh_int.h"
#include "l2c_api.h"
#include "osi/include/log.h"
#include "osi/include/osi.h"
#include "utl.h"
/*****************************************************************************
* Constants
****************************************************************************/
static const tBTA_SYS_REG bta_hh_reg = {bta_hh_hdl_event, BTA_HhDisable};
/*******************************************************************************
*
* Function BTA_HhEnable
*
* Description Enable the HID host. This function must be called before
* any other functions in the HID host API are called. When the
* enable operation is complete the callback function will be
* called with BTA_HH_ENABLE_EVT.
*
*
* Returns void
*
******************************************************************************/
void BTA_HhEnable(tBTA_SEC sec_mask, tBTA_HH_CBACK* p_cback) {
tBTA_HH_API_ENABLE* p_buf =
(tBTA_HH_API_ENABLE*)osi_calloc(sizeof(tBTA_HH_API_ENABLE));
LOG_INFO(LOG_TAG, "%s sec_mask:0x%x p_cback:%p", __func__, sec_mask, p_cback);
/* register with BTA system manager */
bta_sys_register(BTA_ID_HH, &bta_hh_reg);
p_buf->hdr.event = BTA_HH_API_ENABLE_EVT;
p_buf->p_cback = p_cback;
p_buf->sec_mask = sec_mask;
bta_sys_sendmsg(p_buf);
}
/*******************************************************************************
*
* Function BTA_HhDisable
*
* Description Disable the HID host. If the server is currently
* connected, the connection will be closed.
*
* Returns void
*
******************************************************************************/
void BTA_HhDisable(void) {
BT_HDR* p_buf = (BT_HDR*)osi_malloc(sizeof(BT_HDR));
bta_sys_deregister(BTA_ID_HH);
p_buf->event = BTA_HH_API_DISABLE_EVT;
bta_sys_sendmsg(p_buf);
}
/*******************************************************************************
*
* Function BTA_HhClose
*
* Description Disconnect a connection.
*
* Returns void
*
******************************************************************************/
void BTA_HhClose(uint8_t dev_handle) {
BT_HDR* p_buf = (BT_HDR*)osi_calloc(sizeof(BT_HDR));
p_buf->event = BTA_HH_API_CLOSE_EVT;
p_buf->layer_specific = (uint16_t)dev_handle;
bta_sys_sendmsg(p_buf);
}
/*******************************************************************************
*
* Function BTA_HhOpen
*
* Description Connect to a device of specified BD address in specified
* protocol mode and security level.
*
* Returns void
*
******************************************************************************/
void BTA_HhOpen(const RawAddress& dev_bda, tBTA_HH_PROTO_MODE mode,
tBTA_SEC sec_mask) {
tBTA_HH_API_CONN* p_buf =
(tBTA_HH_API_CONN*)osi_calloc(sizeof(tBTA_HH_API_CONN));
p_buf->hdr.event = BTA_HH_API_OPEN_EVT;
p_buf->hdr.layer_specific = BTA_HH_INVALID_HANDLE;
p_buf->sec_mask = sec_mask;
p_buf->mode = mode;
p_buf->bd_addr = dev_bda;
bta_sys_sendmsg((void*)p_buf);
}
/*******************************************************************************
*
* Function bta_hh_snd_write_dev
*
******************************************************************************/
static void bta_hh_snd_write_dev(uint8_t dev_handle, uint8_t t_type,
uint8_t param, uint16_t data, uint8_t rpt_id,
BT_HDR* p_data) {
tBTA_HH_CMD_DATA* p_buf =
(tBTA_HH_CMD_DATA*)osi_calloc(sizeof(tBTA_HH_CMD_DATA));
p_buf->hdr.event = BTA_HH_API_WRITE_DEV_EVT;
p_buf->hdr.layer_specific = (uint16_t)dev_handle;
p_buf->t_type = t_type;
p_buf->data = data;
p_buf->param = param;
p_buf->p_data = p_data;
p_buf->rpt_id = rpt_id;
bta_sys_sendmsg(p_buf);
}
/*******************************************************************************
*
* Function BTA_HhSetReport
*
* Description send SET_REPORT to device.
*
* Parameter dev_handle: device handle
* r_type: report type, could be BTA_HH_RPTT_OUTPUT or
* BTA_HH_RPTT_FEATURE.
* Returns void
*
******************************************************************************/
void BTA_HhSetReport(uint8_t dev_handle, tBTA_HH_RPT_TYPE r_type,
BT_HDR* p_data) {
bta_hh_snd_write_dev(dev_handle, HID_TRANS_SET_REPORT, r_type, 0, 0, p_data);
}
/*******************************************************************************
*
* Function BTA_HhGetReport
*
* Description Send a GET_REPORT to HID device.
*
* Returns void
*
******************************************************************************/
void BTA_HhGetReport(uint8_t dev_handle, tBTA_HH_RPT_TYPE r_type,
uint8_t rpt_id, uint16_t buf_size) {
uint8_t param = (buf_size) ? (r_type | 0x08) : r_type;
bta_hh_snd_write_dev(dev_handle, HID_TRANS_GET_REPORT, param, buf_size,
rpt_id, NULL);
}
/*******************************************************************************
*
* Function BTA_HhSetProtoMode
*
* Description This function set the protocol mode at specified HID handle
*
* Returns void
*
******************************************************************************/
void BTA_HhSetProtoMode(uint8_t dev_handle, tBTA_HH_PROTO_MODE p_type) {
bta_hh_snd_write_dev(dev_handle, HID_TRANS_SET_PROTOCOL, (uint8_t)p_type, 0,
0, NULL);
}
/*******************************************************************************
*
* Function BTA_HhGetProtoMode
*
* Description This function get protocol mode information.
*
* Returns void
*
******************************************************************************/
void BTA_HhGetProtoMode(uint8_t dev_handle) {
bta_hh_snd_write_dev(dev_handle, HID_TRANS_GET_PROTOCOL, 0, 0, 0, NULL);
}
/*******************************************************************************
*
* Function BTA_HhSetIdle
*
* Description send SET_IDLE to device.
*
* Returns void
*
******************************************************************************/
void BTA_HhSetIdle(uint8_t dev_handle, uint16_t idle_rate) {
bta_hh_snd_write_dev(dev_handle, HID_TRANS_SET_IDLE, 0, idle_rate, 0, NULL);
}
/*******************************************************************************
*
* Function BTA_HhGetIdle
*
* Description Send a GET_IDLE from HID device.
*
* Returns void
*
******************************************************************************/
void BTA_HhGetIdle(uint8_t dev_handle) {
bta_hh_snd_write_dev(dev_handle, HID_TRANS_GET_IDLE, 0, 0, 0, NULL);
}
/*******************************************************************************
*
* Function BTA_HhSendCtrl
*
* Description Send a control command to HID device.
*
* Returns void
*
******************************************************************************/
void BTA_HhSendCtrl(uint8_t dev_handle, tBTA_HH_TRANS_CTRL_TYPE c_type) {
bta_hh_snd_write_dev(dev_handle, HID_TRANS_CONTROL, (uint8_t)c_type, 0, 0,
NULL);
}
/*******************************************************************************
*
* Function BTA_HhSendData
*
* Description This function send DATA transaction to HID device.
*
* Parameter dev_handle: device handle
* dev_bda: remote device address
* p_data: data to be sent in the DATA transaction; or
* the data to be write into the Output Report of a LE
* HID device. The report is identified the report ID
* which is the value of the byte
* (uint8_t *)(p_buf + 1) + *p_buf->offset.
* p_data->layer_specific needs to be set to the report
* type. It can be OUTPUT report, or FEATURE report.
*
* Returns void
*
******************************************************************************/
void BTA_HhSendData(uint8_t dev_handle, UNUSED_ATTR const RawAddress& dev_bda,
BT_HDR* p_data) {
#if (BTA_HH_LE_INCLUDED == TRUE)
if (p_data->layer_specific != BTA_HH_RPTT_OUTPUT) {
APPL_TRACE_ERROR(
"ERROR! Wrong report type! Write Command only valid for output "
"report!");
return;
}
#endif
bta_hh_snd_write_dev(dev_handle, HID_TRANS_DATA,
(uint8_t)p_data->layer_specific, 0, 0, p_data);
}
/*******************************************************************************
*
* Function BTA_HhGetDscpInfo
*
* Description Get HID device report descriptor
*
* Returns void
*
******************************************************************************/
void BTA_HhGetDscpInfo(uint8_t dev_handle) {
BT_HDR* p_buf = (BT_HDR*)osi_calloc(sizeof(BT_HDR));
p_buf->event = BTA_HH_API_GET_DSCP_EVT;
p_buf->layer_specific = (uint16_t)dev_handle;
bta_sys_sendmsg(p_buf);
}
/*******************************************************************************
*
* Function BTA_HhAddDev
*
* Description Add a virtually cabled device into HID-Host device list
* to manage and assign a device handle for future API call,
* host applciation call this API at start-up to initialize its
* virtually cabled devices.
*
* Returns void
*
******************************************************************************/
void BTA_HhAddDev(const RawAddress& bda, tBTA_HH_ATTR_MASK attr_mask,
uint8_t sub_class, uint8_t app_id,
tBTA_HH_DEV_DSCP_INFO dscp_info) {
size_t len = sizeof(tBTA_HH_MAINT_DEV) + dscp_info.descriptor.dl_len;
tBTA_HH_MAINT_DEV* p_buf = (tBTA_HH_MAINT_DEV*)osi_calloc(len);
p_buf->hdr.event = BTA_HH_API_MAINT_DEV_EVT;
p_buf->sub_event = BTA_HH_ADD_DEV_EVT;
p_buf->hdr.layer_specific = BTA_HH_INVALID_HANDLE;
p_buf->attr_mask = (uint16_t)attr_mask;
p_buf->sub_class = sub_class;
p_buf->app_id = app_id;
p_buf->bda = bda;
memcpy(&p_buf->dscp_info, &dscp_info, sizeof(tBTA_HH_DEV_DSCP_INFO));
if (dscp_info.descriptor.dl_len != 0 && dscp_info.descriptor.dsc_list) {
p_buf->dscp_info.descriptor.dl_len = dscp_info.descriptor.dl_len;
p_buf->dscp_info.descriptor.dsc_list = (uint8_t*)(p_buf + 1);
memcpy(p_buf->dscp_info.descriptor.dsc_list, dscp_info.descriptor.dsc_list,
dscp_info.descriptor.dl_len);
} else {
p_buf->dscp_info.descriptor.dsc_list = NULL;
p_buf->dscp_info.descriptor.dl_len = 0;
}
bta_sys_sendmsg(p_buf);
}
/*******************************************************************************
*
* Function BTA_HhRemoveDev
*
* Description Remove a device from the HID host devices list.
*
* Returns void
*
******************************************************************************/
void BTA_HhRemoveDev(uint8_t dev_handle) {
tBTA_HH_MAINT_DEV* p_buf =
(tBTA_HH_MAINT_DEV*)osi_calloc(sizeof(tBTA_HH_MAINT_DEV));
p_buf->hdr.event = BTA_HH_API_MAINT_DEV_EVT;
p_buf->sub_event = BTA_HH_RMV_DEV_EVT;
p_buf->hdr.layer_specific = (uint16_t)dev_handle;
bta_sys_sendmsg(p_buf);
}
/******************************************************************************/
/* Utility Function */
/******************************************************************************/
/*******************************************************************************
*
* Function BTA_HhParseBootRpt
*
* Description This utility function parse a boot mode report.
* For keyboard report, report data will carry the keycode max
* up to 6 key press in one report. Application need to convert
* the keycode into keypress character according to keyboard
* language.
*
* Returns void
*
******************************************************************************/
void BTA_HhParseBootRpt(tBTA_HH_BOOT_RPT* p_data, uint8_t* p_report,
uint16_t report_len) {
p_data->dev_type = BTA_HH_DEVT_UNKNOWN;
if (p_report) {
/* first byte is report ID */
switch (p_report[0]) {
case BTA_HH_KEYBD_RPT_ID: /* key board report ID */
p_data->dev_type = p_report[0];
bta_hh_parse_keybd_rpt(p_data, p_report + 1,
(uint16_t)(report_len - 1));
break;
case BTA_HH_MOUSE_RPT_ID: /* mouse report ID */
p_data->dev_type = p_report[0];
bta_hh_parse_mice_rpt(p_data, p_report + 1, (uint16_t)(report_len - 1));
break;
default:
APPL_TRACE_DEBUG("Unknown boot report: %d", p_report[0]);
;
break;
}
}
return;
}
#endif /* BTA_HH_INCLUDED */