| /****************************************************************************** |
| * |
| * Copyright (C) 2016 The Android Open Source Project |
| * Copyright (C) 2009-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| #define LOG_TAG "bt_btif_a2dp_control" |
| |
| #include <base/logging.h> |
| #include <stdbool.h> |
| #include <stdint.h> |
| |
| #include "audio_a2dp_hw/include/audio_a2dp_hw.h" |
| #include "bt_common.h" |
| #include "btif_a2dp.h" |
| #include "btif_a2dp_control.h" |
| #include "btif_a2dp_sink.h" |
| #include "btif_a2dp_source.h" |
| #include "btif_av.h" |
| #include "btif_av_co.h" |
| #include "btif_hf.h" |
| #include "osi/include/osi.h" |
| #include "uipc.h" |
| |
| #define A2DP_DATA_READ_POLL_MS 10 |
| |
| static void btif_a2dp_data_cb(tUIPC_CH_ID ch_id, tUIPC_EVENT event); |
| static void btif_a2dp_ctrl_cb(tUIPC_CH_ID ch_id, tUIPC_EVENT event); |
| |
| /* We can have max one command pending */ |
| static tA2DP_CTRL_CMD a2dp_cmd_pending = A2DP_CTRL_CMD_NONE; |
| |
| void btif_a2dp_control_init(void) { |
| UIPC_Init(NULL); |
| UIPC_Open(UIPC_CH_ID_AV_CTRL, btif_a2dp_ctrl_cb); |
| } |
| |
| void btif_a2dp_control_cleanup(void) { |
| /* This calls blocks until UIPC is fully closed */ |
| UIPC_Close(UIPC_CH_ID_ALL); |
| } |
| |
| static void btif_a2dp_recv_ctrl_data(void) { |
| tA2DP_CTRL_CMD cmd = A2DP_CTRL_CMD_NONE; |
| int n; |
| |
| uint8_t read_cmd = 0; /* The read command size is one octet */ |
| n = UIPC_Read(UIPC_CH_ID_AV_CTRL, NULL, &read_cmd, 1); |
| cmd = static_cast<tA2DP_CTRL_CMD>(read_cmd); |
| |
| /* detach on ctrl channel means audioflinger process was terminated */ |
| if (n == 0) { |
| APPL_TRACE_WARNING("%s: CTRL CH DETACHED", __func__); |
| UIPC_Close(UIPC_CH_ID_AV_CTRL); |
| return; |
| } |
| |
| APPL_TRACE_WARNING("%s: a2dp-ctrl-cmd : %s", __func__, |
| audio_a2dp_hw_dump_ctrl_event(cmd)); |
| a2dp_cmd_pending = cmd; |
| |
| switch (cmd) { |
| case A2DP_CTRL_CMD_CHECK_READY: |
| if (btif_a2dp_source_media_task_is_shutting_down()) { |
| APPL_TRACE_WARNING("%s: A2DP command %s while media task shutting down", |
| __func__, audio_a2dp_hw_dump_ctrl_event(cmd)); |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_FAILURE); |
| return; |
| } |
| |
| /* check whether AV is ready to setup A2DP datapath */ |
| if (btif_av_stream_ready() || btif_av_stream_started_ready()) { |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_SUCCESS); |
| } else { |
| APPL_TRACE_WARNING("%s: A2DP command %s while AV stream is not ready", |
| __func__, audio_a2dp_hw_dump_ctrl_event(cmd)); |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_FAILURE); |
| } |
| break; |
| |
| case A2DP_CTRL_CMD_START: |
| /* |
| * Don't send START request to stack while we are in a call. |
| * Some headsets such as "Sony MW600", don't allow AVDTP START |
| * while in a call, and respond with BAD_STATE. |
| */ |
| if (!btif_hf_is_call_idle()) { |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_INCALL_FAILURE); |
| break; |
| } |
| |
| if (btif_a2dp_source_is_streaming()) { |
| APPL_TRACE_WARNING("%s: A2DP command %s while source is streaming", |
| __func__, audio_a2dp_hw_dump_ctrl_event(cmd)); |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_FAILURE); |
| break; |
| } |
| |
| if (btif_av_stream_ready()) { |
| /* Setup audio data channel listener */ |
| UIPC_Open(UIPC_CH_ID_AV_AUDIO, btif_a2dp_data_cb); |
| |
| /* |
| * Post start event and wait for audio path to open. |
| * If we are the source, the ACK will be sent after the start |
| * procedure is completed, othewise send it now. |
| */ |
| btif_dispatch_sm_event(BTIF_AV_START_STREAM_REQ_EVT, NULL, 0); |
| if (btif_av_get_peer_sep() == AVDT_TSEP_SRC) |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_SUCCESS); |
| break; |
| } |
| |
| if (btif_av_stream_started_ready()) { |
| /* |
| * Already started, setup audio data channel listener and ACK |
| * back immediately. |
| */ |
| UIPC_Open(UIPC_CH_ID_AV_AUDIO, btif_a2dp_data_cb); |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_SUCCESS); |
| break; |
| } |
| APPL_TRACE_WARNING("%s: A2DP command %s while AV stream is not ready", |
| __func__, audio_a2dp_hw_dump_ctrl_event(cmd)); |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_FAILURE); |
| break; |
| |
| case A2DP_CTRL_CMD_STOP: |
| if (btif_av_get_peer_sep() == AVDT_TSEP_SNK && |
| !btif_a2dp_source_is_streaming()) { |
| /* We are already stopped, just ack back */ |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_SUCCESS); |
| break; |
| } |
| |
| btif_dispatch_sm_event(BTIF_AV_STOP_STREAM_REQ_EVT, NULL, 0); |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_SUCCESS); |
| break; |
| |
| case A2DP_CTRL_CMD_SUSPEND: |
| /* Local suspend */ |
| if (btif_av_stream_started_ready()) { |
| btif_dispatch_sm_event(BTIF_AV_SUSPEND_STREAM_REQ_EVT, NULL, 0); |
| break; |
| } |
| /* If we are not in started state, just ack back ok and let |
| * audioflinger close the channel. This can happen if we are |
| * remotely suspended, clear REMOTE SUSPEND flag. |
| */ |
| btif_av_clear_remote_suspend_flag(); |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_SUCCESS); |
| break; |
| |
| case A2DP_CTRL_GET_INPUT_AUDIO_CONFIG: { |
| tA2DP_SAMPLE_RATE sample_rate = btif_a2dp_sink_get_sample_rate(); |
| tA2DP_CHANNEL_COUNT channel_count = btif_a2dp_sink_get_channel_count(); |
| |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_SUCCESS); |
| UIPC_Send(UIPC_CH_ID_AV_CTRL, 0, reinterpret_cast<uint8_t*>(&sample_rate), |
| sizeof(tA2DP_SAMPLE_RATE)); |
| UIPC_Send(UIPC_CH_ID_AV_CTRL, 0, &channel_count, |
| sizeof(tA2DP_CHANNEL_COUNT)); |
| break; |
| } |
| |
| case A2DP_CTRL_GET_OUTPUT_AUDIO_CONFIG: { |
| btav_a2dp_codec_config_t codec_config; |
| btav_a2dp_codec_config_t codec_capability; |
| codec_config.sample_rate = BTAV_A2DP_CODEC_SAMPLE_RATE_NONE; |
| codec_config.bits_per_sample = BTAV_A2DP_CODEC_BITS_PER_SAMPLE_NONE; |
| codec_config.channel_mode = BTAV_A2DP_CODEC_CHANNEL_MODE_NONE; |
| codec_capability.sample_rate = BTAV_A2DP_CODEC_SAMPLE_RATE_NONE; |
| codec_capability.bits_per_sample = BTAV_A2DP_CODEC_BITS_PER_SAMPLE_NONE; |
| codec_capability.channel_mode = BTAV_A2DP_CODEC_CHANNEL_MODE_NONE; |
| |
| A2dpCodecConfig* current_codec = bta_av_get_a2dp_current_codec(); |
| if (current_codec != nullptr) { |
| codec_config = current_codec->getCodecConfig(); |
| codec_capability = current_codec->getCodecCapability(); |
| } |
| |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_SUCCESS); |
| // Send the current codec config |
| UIPC_Send(UIPC_CH_ID_AV_CTRL, 0, |
| reinterpret_cast<const uint8_t*>(&codec_config.sample_rate), |
| sizeof(btav_a2dp_codec_sample_rate_t)); |
| UIPC_Send(UIPC_CH_ID_AV_CTRL, 0, |
| reinterpret_cast<const uint8_t*>(&codec_config.bits_per_sample), |
| sizeof(btav_a2dp_codec_bits_per_sample_t)); |
| UIPC_Send(UIPC_CH_ID_AV_CTRL, 0, |
| reinterpret_cast<const uint8_t*>(&codec_config.channel_mode), |
| sizeof(btav_a2dp_codec_channel_mode_t)); |
| // Send the current codec capability |
| UIPC_Send(UIPC_CH_ID_AV_CTRL, 0, |
| reinterpret_cast<const uint8_t*>(&codec_capability.sample_rate), |
| sizeof(btav_a2dp_codec_sample_rate_t)); |
| UIPC_Send(UIPC_CH_ID_AV_CTRL, 0, reinterpret_cast<const uint8_t*>( |
| &codec_capability.bits_per_sample), |
| sizeof(btav_a2dp_codec_bits_per_sample_t)); |
| UIPC_Send(UIPC_CH_ID_AV_CTRL, 0, reinterpret_cast<const uint8_t*>( |
| &codec_capability.channel_mode), |
| sizeof(btav_a2dp_codec_channel_mode_t)); |
| break; |
| } |
| |
| case A2DP_CTRL_SET_OUTPUT_AUDIO_CONFIG: { |
| btav_a2dp_codec_config_t codec_config; |
| codec_config.sample_rate = BTAV_A2DP_CODEC_SAMPLE_RATE_NONE; |
| codec_config.bits_per_sample = BTAV_A2DP_CODEC_BITS_PER_SAMPLE_NONE; |
| codec_config.channel_mode = BTAV_A2DP_CODEC_CHANNEL_MODE_NONE; |
| |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_SUCCESS); |
| // Send the current codec config |
| if (UIPC_Read(UIPC_CH_ID_AV_CTRL, 0, |
| reinterpret_cast<uint8_t*>(&codec_config.sample_rate), |
| sizeof(btav_a2dp_codec_sample_rate_t)) != |
| sizeof(btav_a2dp_codec_sample_rate_t)) { |
| APPL_TRACE_ERROR("%s: Error reading sample rate from audio HAL", |
| __func__); |
| break; |
| } |
| if (UIPC_Read(UIPC_CH_ID_AV_CTRL, 0, |
| reinterpret_cast<uint8_t*>(&codec_config.bits_per_sample), |
| sizeof(btav_a2dp_codec_bits_per_sample_t)) != |
| sizeof(btav_a2dp_codec_bits_per_sample_t)) { |
| APPL_TRACE_ERROR("%s: Error reading bits per sample from audio HAL", |
| __func__); |
| break; |
| } |
| if (UIPC_Read(UIPC_CH_ID_AV_CTRL, 0, |
| reinterpret_cast<uint8_t*>(&codec_config.channel_mode), |
| sizeof(btav_a2dp_codec_channel_mode_t)) != |
| sizeof(btav_a2dp_codec_channel_mode_t)) { |
| APPL_TRACE_ERROR("%s: Error reading channel mode from audio HAL", |
| __func__); |
| break; |
| } |
| APPL_TRACE_DEBUG( |
| "%s: A2DP_CTRL_SET_OUTPUT_AUDIO_CONFIG: " |
| "sample_rate=0x%x bits_per_sample=0x%x " |
| "channel_mode=0x%x", |
| __func__, codec_config.sample_rate, codec_config.bits_per_sample, |
| codec_config.channel_mode); |
| btif_a2dp_source_feeding_update_req(codec_config); |
| break; |
| } |
| |
| case A2DP_CTRL_CMD_OFFLOAD_START: |
| btif_dispatch_sm_event(BTIF_AV_OFFLOAD_START_REQ_EVT, NULL, 0); |
| break; |
| |
| default: |
| APPL_TRACE_ERROR("%s: UNSUPPORTED CMD (%d)", __func__, cmd); |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_FAILURE); |
| break; |
| } |
| APPL_TRACE_WARNING("%s: a2dp-ctrl-cmd : %s DONE", __func__, |
| audio_a2dp_hw_dump_ctrl_event(cmd)); |
| } |
| |
| static void btif_a2dp_ctrl_cb(UNUSED_ATTR tUIPC_CH_ID ch_id, |
| tUIPC_EVENT event) { |
| APPL_TRACE_WARNING("%s: A2DP-CTRL-CHANNEL EVENT %s", __func__, |
| dump_uipc_event(event)); |
| |
| switch (event) { |
| case UIPC_OPEN_EVT: |
| break; |
| |
| case UIPC_CLOSE_EVT: |
| /* restart ctrl server unless we are shutting down */ |
| if (btif_a2dp_source_media_task_is_running()) |
| UIPC_Open(UIPC_CH_ID_AV_CTRL, btif_a2dp_ctrl_cb); |
| break; |
| |
| case UIPC_RX_DATA_READY_EVT: |
| btif_a2dp_recv_ctrl_data(); |
| break; |
| |
| default: |
| APPL_TRACE_ERROR("%s: ### A2DP-CTRL-CHANNEL EVENT %d NOT HANDLED ###", |
| __func__, event); |
| break; |
| } |
| } |
| |
| static void btif_a2dp_data_cb(UNUSED_ATTR tUIPC_CH_ID ch_id, |
| tUIPC_EVENT event) { |
| APPL_TRACE_WARNING("%s: BTIF MEDIA (A2DP-DATA) EVENT %s", __func__, |
| dump_uipc_event(event)); |
| |
| switch (event) { |
| case UIPC_OPEN_EVT: |
| /* |
| * Read directly from media task from here on (keep callback for |
| * connection events. |
| */ |
| UIPC_Ioctl(UIPC_CH_ID_AV_AUDIO, UIPC_REG_REMOVE_ACTIVE_READSET, NULL); |
| UIPC_Ioctl(UIPC_CH_ID_AV_AUDIO, UIPC_SET_READ_POLL_TMO, |
| reinterpret_cast<void*>(A2DP_DATA_READ_POLL_MS)); |
| |
| if (btif_av_get_peer_sep() == AVDT_TSEP_SNK) { |
| /* Start the media task to encode the audio */ |
| btif_a2dp_source_start_audio_req(); |
| } |
| |
| /* ACK back when media task is fully started */ |
| break; |
| |
| case UIPC_CLOSE_EVT: |
| APPL_TRACE_EVENT("%s: ## AUDIO PATH DETACHED ##", __func__); |
| btif_a2dp_command_ack(A2DP_CTRL_ACK_SUCCESS); |
| /* |
| * Send stop request only if we are actively streaming and haven't |
| * received a stop request. Potentially, the audioflinger detached |
| * abnormally. |
| */ |
| if (btif_a2dp_source_is_streaming()) { |
| /* Post stop event and wait for audio path to stop */ |
| btif_dispatch_sm_event(BTIF_AV_STOP_STREAM_REQ_EVT, NULL, 0); |
| } |
| break; |
| |
| default: |
| APPL_TRACE_ERROR("%s: ### A2DP-DATA EVENT %d NOT HANDLED ###", __func__, |
| event); |
| break; |
| } |
| } |
| |
| void btif_a2dp_command_ack(tA2DP_CTRL_ACK status) { |
| uint8_t ack = status; |
| |
| APPL_TRACE_WARNING("%s: ## a2dp ack : %s, status %d ##", __func__, |
| audio_a2dp_hw_dump_ctrl_event(a2dp_cmd_pending), status); |
| |
| /* Sanity check */ |
| if (a2dp_cmd_pending == A2DP_CTRL_CMD_NONE) { |
| APPL_TRACE_ERROR("%s: warning : no command pending, ignore ack", __func__); |
| return; |
| } |
| |
| /* Clear pending */ |
| a2dp_cmd_pending = A2DP_CTRL_CMD_NONE; |
| |
| /* Acknowledge start request */ |
| UIPC_Send(UIPC_CH_ID_AV_CTRL, 0, &ack, sizeof(ack)); |
| } |
